From: rtel Date: Fri, 6 May 2016 12:40:27 +0000 (+0000) Subject: Update some more standard demos for use on 64-bit architectures. X-Git-Tag: V9.0.0~8 X-Git-Url: https://git.sur5r.net/?p=freertos;a=commitdiff_plain;h=ea7bc5ad89464c11ff7161aecccf65828ae60175 Update some more standard demos for use on 64-bit architectures. Update the Xilinx Ultrascale+ Cortex-A53 (64-bit) and Cortex-R5 (32-bit) demos to use version 2016.1 of the SDK. git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@2455 1d2547de-c912-0410-9cb9-b8ca96c0e9e2 --- diff --git a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/.project b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/.project index 6d144a479..d2866c629 100644 --- a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/.project +++ b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/.project @@ -69,7 +69,7 @@ - 1461847438191 + 1462537732456 src/Full_Demo/Standard_Demo_Tasks 5 @@ -78,7 +78,7 @@ - 1461847438201 + 1462537732456 src/Full_Demo/Standard_Demo_Tasks 5 @@ -87,7 +87,7 @@ - 1461847438221 + 1462537732466 src/Full_Demo/Standard_Demo_Tasks 5 @@ -96,7 +96,7 @@ - 1461847438241 + 1462537732466 src/Full_Demo/Standard_Demo_Tasks 5 @@ -105,7 +105,7 @@ - 1461847438251 + 1462537732476 src/Full_Demo/Standard_Demo_Tasks 5 @@ -114,7 +114,7 @@ - 1461847438251 + 1462537732486 src/Full_Demo/Standard_Demo_Tasks 5 @@ -123,7 +123,7 @@ - 1461847438261 + 1462537732486 src/Full_Demo/Standard_Demo_Tasks 5 @@ -132,7 +132,7 @@ - 1461847438261 + 1462537732496 src/Full_Demo/Standard_Demo_Tasks 5 @@ -141,7 +141,7 @@ - 1461847438271 + 1462537732506 src/Full_Demo/Standard_Demo_Tasks 5 @@ -150,7 +150,7 @@ - 1461847438281 + 1462537732506 src/Full_Demo/Standard_Demo_Tasks 5 @@ -159,7 +159,7 @@ - 1461847438301 + 1462537732516 src/Full_Demo/Standard_Demo_Tasks 5 @@ -167,6 +167,42 @@ 1.0-name-matches-false-false-IntSemTest.c + + 1462537732516 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-StaticAllocation.c + + + + 1462537732526 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-AbortDelay.c + + + + 1462537732536 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-QueueOverwrite.c + + + + 1462537732546 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-TimerDemo.c + + 1461847264041 src/FreeRTOS_Source/portable/GCC diff --git a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Blinky_Demo/main_blinky.c b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Blinky_Demo/main_blinky.c index 91702ed4b..d5d8aad77 100644 --- a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Blinky_Demo/main_blinky.c +++ b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Blinky_Demo/main_blinky.c @@ -75,7 +75,7 @@ * implements the simply blinky style version. * * NOTE 2: This file only contains the source code that is specific to the - * basic demo. Generic functions, such FreeRTOS hook functions, and functions + * simple demo. Generic functions, such FreeRTOS hook functions, and functions * required to configure the hardware are defined in main.c. ****************************************************************************** * @@ -94,14 +94,14 @@ * in this file. prvQueueReceiveTask() sits in a loop where it repeatedly * blocks on attempts to read data from the queue that was created within * main_blinky(). When data is received, the task checks the value of the - * data, and if the value equals the expected 100, toggles an LED. The 'block - * time' parameter passed to the queue receive function specifies that the - * task should be held in the Blocked state indefinitely to wait for data to - * be available on the queue. The queue receive task will only leave the - * Blocked state when the queue send task writes to the queue. As the queue - * send task writes to the queue every 200 milliseconds, the queue receive - * task leaves the Blocked state every 200 milliseconds, and therefore toggles - * the LED every 200 milliseconds. + * data, and if the value equals the expected 100, outputs a message to the + * UART. The 'block time' parameter passed to the queue receive function + * specifies that the task should be held in the Blocked state indefinitely to + * wait for data to be available on the queue. The queue receive task will only + * leave the Blocked state when the queue send task writes to the queue. As the + * queue send task writes to the queue every 200 milliseconds, the queue receive + * task leaves the Blocked state every 200 milliseconds, and therefore outputs + * a message every 200 milliseconds. */ /* Kernel includes. */ @@ -109,8 +109,8 @@ #include "task.h" #include "semphr.h" -/* Standard demo includes. */ -#include "partest.h" +/* Xilinx includes. */ +#include "xil_printf.h" /* Priorities at which the tasks are created. */ #define mainQUEUE_RECEIVE_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 ) @@ -125,9 +125,6 @@ will remove items as they are added, meaning the send task should always find the queue empty. */ #define mainQUEUE_LENGTH ( 1 ) -/* The LED toggled by the Rx task. */ -#define mainTASK_LED ( 0 ) - /*-----------------------------------------------------------*/ /* @@ -221,7 +218,7 @@ const uint32_t ulExpectedValue = 100UL; it the expected value? If it is, toggle the LED. */ if( ulReceivedValue == ulExpectedValue ) { - vParTestToggleLED( mainTASK_LED ); + xil_printf( "100 received\r\n" ); ulReceivedValue = 0U; } } diff --git a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/FreeRTOSConfig.h b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/FreeRTOSConfig.h index 8e46f43b4..b426d9b93 100644 --- a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/FreeRTOSConfig.h +++ b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/FreeRTOSConfig.h @@ -132,6 +132,10 @@ #define configUSE_COUNTING_SEMAPHORES 1 #define configUSE_QUEUE_SETS 1 +/* This demo creates RTOS objects using both static and dynamic allocation. */ +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 /* Defaults to 1 anyway. */ + /* Co-routine definitions. */ #define configUSE_CO_ROUTINES 0 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) @@ -153,6 +157,8 @@ to exclude the API function. */ #define INCLUDE_vTaskDelay 1 #define INCLUDE_xTimerPendFunctionCall 1 #define INCLUDE_eTaskGetState 1 +#define INCLUDE_xTaskAbortDelay 1 +#define INCLUDE_xTaskGetHandle 1 /* This demo makes use of one or more example stats formatting functions. These format the raw data provided by the uxTaskGetSystemState() function in to human @@ -176,8 +182,8 @@ command interpreter running. */ /* Normal assert() semantics without relying on the provision of an assert.h header file. */ -void vAssertCalled( const char * pcFile, unsigned long ulLine ); -#define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ); +void vMainAssertCalled( const char *pcFileName, uint32_t ulLineNumber ); +#define configASSERT( x ) if( ( x ) == 0 ) { vMainAssertCalled( __FILE__, __LINE__ ); } /* If configTASK_RETURN_ADDRESS is not defined then a task that attempts to return from its implementing function will end up in a "task exit error" diff --git a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Full_Demo/main_full.c b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Full_Demo/main_full.c index 5a7bbceea..b54af1729 100644 --- a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Full_Demo/main_full.c +++ b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/Full_Demo/main_full.c @@ -101,16 +101,10 @@ * frequently. A register containing an unexpected value is indicative of an * error in the context switching mechanism. * - * "Check" task - The check task period is initially set to three seconds. The - * task checks that all the standard demo tasks, and the register check tasks, - * are not only still executing, but are executing without reporting any errors. - * If the check task discovers that a task has either stalled, or reported an - * error, then it changes its own execution period from the initial three - * seconds, to just 200ms. The check task also toggles an LED each time it is - * called. This provides a visual indication of the system status: If the LED - * toggles every five seconds, then no issues have been discovered. If the LED - * toggles every 200ms, then an issue has been discovered with at least one - * task. + * "Check" task - The check task period is set to five seconds. Each time it + * executes it checks all the standard demo tasks, and the register check tasks, + * are not only still executing, but are executing without reporting any errors, + * then outputs the system status to the UART. */ /* Standard includes. */ @@ -130,11 +124,17 @@ #include "countsem.h" #include "GenQTest.h" #include "recmutex.h" -#include "partest.h" #include "IntQueue.h" #include "EventGroupsDemo.h" #include "TaskNotify.h" #include "IntSemTest.h" +#include "StaticAllocation.h" +#include "AbortDelay.h" +#include "QueueOverwrite.h" +#include "TimerDemo.h" + +/* Xilinx includes. */ +#include "xil_printf.h" /* Priorities for the demo application tasks. */ #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + ( UBaseType_t ) 1 ) @@ -144,23 +144,14 @@ #define mainUART_COMMAND_CONSOLE_STACK_SIZE ( configMINIMAL_STACK_SIZE * ( UBaseType_t ) 3 ) #define mainCOM_TEST_TASK_PRIORITY ( tskIDLE_PRIORITY + ( UBaseType_t ) 2 ) #define mainCHECK_TASK_PRIORITY ( configMAX_PRIORITIES - ( UBaseType_t ) 1 ) - -/* The LED used by the check task. */ -#define mainCHECK_LED ( 0 ) +#define mainQUEUE_OVERWRITE_PRIORITY ( tskIDLE_PRIORITY ) /* A block time of zero simply means "don't block". */ #define mainDONT_BLOCK ( ( TickType_t ) 0 ) -/* The period of the check task, in ms, provided no errors have been reported by -any of the standard demo tasks. ms are converted to the equivalent in ticks -using the pdMS_TO_TICKS() macro constant. */ +/* The period of the check task, in ms. */ #define mainNO_ERROR_CHECK_TASK_PERIOD pdMS_TO_TICKS( ( TickType_t ) 5000 ) -/* The period of the check task, in ms, if an error has been reported in one of -the standard demo tasks. ms are converted to the equivalent in ticks using the -pdMS_TO_TICKS() macro. */ -#define mainERROR_CHECK_TASK_PERIOD pdMS_TO_TICKS( ( TickType_t ) ( 200 ) ) - /* Parameters that are passed into the register check tasks solely for the purpose of ensuring parameters are passed into tasks correctly. */ #define mainREG_TEST_TASK_1_PARAMETER ( ( void * ) 0x12345678 ) @@ -207,6 +198,13 @@ extern void vUARTCommandConsoleStart( uint16_t usStackSize, UBaseType_t uxPriori */ static void prvPseudoRandomiser( void *pvParameters ); +/* + * The full demo uses the tick hook function to include test code in the tick + * interrupt. vFullDemoTickHook() is called by vApplicationTickHook(), which + * is defined in main.c. + */ +void vFullDemoTickHook( void ); + /*-----------------------------------------------------------*/ /* The following two variables are used to communicate the status of the @@ -233,6 +231,10 @@ void main_full( void ) vStartEventGroupTasks(); vStartTaskNotifyTask(); vStartInterruptSemaphoreTasks(); + vStartStaticallyAllocatedTasks(); + vCreateAbortDelayTasks(); + vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_PRIORITY ); + vStartTimerDemoTask( mainTIMER_TEST_PERIOD ); /* Create the register check tasks, as described at the top of this file */ xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL ); @@ -266,6 +268,7 @@ TickType_t xDelayPeriod = mainNO_ERROR_CHECK_TASK_PERIOD; TickType_t xLastExecutionTime; static uint64_t ullLastRegTest1Value = 0, ullLastRegTest2Value = 0; uint64_t ullErrorFound = pdFALSE; +const char *pcStatusString = "Pass"; /* Just to stop compiler warnings. */ ( void ) pvParameters; @@ -275,11 +278,8 @@ uint64_t ullErrorFound = pdFALSE; xLastExecutionTime = xTaskGetTickCount(); /* Cycle for ever, delaying then checking all the other tasks are still - operating without error. The onboard LED is toggled on each iteration. - If an error is detected then the delay period is decreased from - mainNO_ERROR_CHECK_TASK_PERIOD to mainERROR_CHECK_TASK_PERIOD. This has the - effect of increasing the rate at which the onboard LED toggles, and in so - doing gives visual feedback of the system status. */ + operating without error. The system status is written to the UART on each + iteration. */ for( ;; ) { /* Delay until it is time to execute again. */ @@ -290,85 +290,111 @@ uint64_t ullErrorFound = pdFALSE; if( xAreIntQueueTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 0ULL; + pcStatusString = "Error: IntQ"; } if( xAreMathsTaskStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 1ULL; + pcStatusString = "Error: Math"; } if( xAreDynamicPriorityTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 2ULL; + pcStatusString = "Error: Dynamic"; } if ( xAreBlockTimeTestTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 4ULL; + pcStatusString = "Error: Block Time"; } if ( xAreGenericQueueTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 5ULL; + pcStatusString = "Error: Generic Queue"; } if ( xAreRecursiveMutexTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 6ULL; + pcStatusString = "Error: Recursive Mutex"; } if( xAreSemaphoreTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 8ULL; + pcStatusString = "Error: Semaphore"; } if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 10ULL; + pcStatusString = "Error: Counting Semaphore"; } if( xAreEventGroupTasksStillRunning() != pdPASS ) { ullErrorFound |= 1ULL << 12ULL; + pcStatusString = "Error: Event Group"; } if( xAreTaskNotificationTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 13ULL; + pcStatusString = "Error: Task Notifications"; } if( xAreInterruptSemaphoreTasksStillRunning() != pdTRUE ) { ullErrorFound |= 1ULL << 14ULL; + pcStatusString = "Error: Interrupt Semaphore"; + } + + if( xAreStaticAllocationTasksStillRunning() != pdTRUE ) + { + ullErrorFound |= 1ULL << 15ULL; + pcStatusString = "Error: Static Allocation"; + } + + if( xAreAbortDelayTestTasksStillRunning() != pdTRUE ) + { + ullErrorFound |= 1ULL << 16ULL; + pcStatusString = "Error: Abort Delay"; + } + + if( xIsQueueOverwriteTaskStillRunning() != pdTRUE ) + { + ullErrorFound |= 1ULL << 17ULL; + pcStatusString = "Error: Queue Overwrite"; + } + + if( xAreTimerDemoTasksStillRunning( xDelayPeriod ) != pdTRUE ) + { + ullErrorFound |= 1ULL << 18ULL; + pcStatusString = "Error: Timer Demo"; } /* Check that the register test 1 task is still running. */ if( ullLastRegTest1Value == ullRegTest1LoopCounter ) { - ullErrorFound |= 1ULL << 15ULL; + ullErrorFound |= 1ULL << 17ULL; + pcStatusString = "Error: Reg Test 1"; } ullLastRegTest1Value = ullRegTest1LoopCounter; /* Check that the register test 2 task is still running. */ if( ullLastRegTest2Value == ullRegTest2LoopCounter ) { - ullErrorFound |= 1ULL << 16ULL; + ullErrorFound |= 1ULL << 18ULL; + pcStatusString = "Error: Reg Test 2"; } ullLastRegTest2Value = ullRegTest2LoopCounter; - /* Toggle the check LED to give an indication of the system status. If - the LED toggles every mainNO_ERROR_CHECK_TASK_PERIOD milliseconds then - everything is ok. A faster toggle indicates an error. */ - vParTestToggleLED( mainCHECK_LED ); - - if( ullErrorFound != pdFALSE ) - { - /* An error has been detected in one of the tasks - flash the LED - at a higher frequency to give visible feedback that something has - gone wrong (it might just be that the loop back connector required - by the comtest tasks has not been fitted). */ - xDelayPeriod = mainERROR_CHECK_TASK_PERIOD; - } + /* Output the system status string. */ + xil_printf( "%s, status code = %lu, tick count = %lu\r\n", pcStatusString, ullErrorFound, xTaskGetTickCount() ); configASSERT( ullErrorFound == pdFALSE ); } @@ -451,9 +477,26 @@ volatile uint64_t ullNextRand = ( uint64_t ) &pvParameters, ullValue; } } } +/*-----------------------------------------------------------*/ +void vFullDemoTickHook( void ) +{ + /* The full demo includes a software timer demo/test that requires + prodding periodically from the tick interrupt. */ + vTimerPeriodicISRTests(); + /* Call the periodic queue overwrite from ISR demo. */ + vQueueOverwritePeriodicISRDemo(); + /* Call the periodic event group from ISR demo. */ + vPeriodicEventGroupsProcessing(); + + /* Call the ISR component of the interrupt semaphore test. */ + vInterruptSemaphorePeriodicTest(); + + /* Call the code that 'gives' a task notification from an ISR. */ + xNotifyTaskFromISR(); +} diff --git a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/ParTest.c b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/ParTest.c deleted file mode 100644 index 439cef6cd..000000000 --- a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/ParTest.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. - All rights reserved - - VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. - - This file is part of the FreeRTOS distribution. - - FreeRTOS is free software; you can redistribute it and/or modify it under - the terms of the GNU General Public License (version 2) as published by the - Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. - - *************************************************************************** - >>! NOTE: The modification to the GPL is included to allow you to !<< - >>! distribute a combined work that includes FreeRTOS without being !<< - >>! obliged to provide the source code for proprietary components !<< - >>! outside of the FreeRTOS kernel. !<< - *************************************************************************** - - FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY - WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS - FOR A PARTICULAR PURPOSE. Full license text is available on the following - link: http://www.freertos.org/a00114.html - - *************************************************************************** - * * - * FreeRTOS provides completely free yet professionally developed, * - * robust, strictly quality controlled, supported, and cross * - * platform software that is more than just the market leader, it * - * is the industry's de facto standard. * - * * - * Help yourself get started quickly while simultaneously helping * - * to support the FreeRTOS project by purchasing a FreeRTOS * - * tutorial book, reference manual, or both: * - * http://www.FreeRTOS.org/Documentation * - * * - *************************************************************************** - - http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading - the FAQ page "My application does not run, what could be wrong?". Have you - defined configASSERT()? - - http://www.FreeRTOS.org/support - In return for receiving this top quality - embedded software for free we request you assist our global community by - participating in the support forum. - - http://www.FreeRTOS.org/training - Investing in training allows your team to - be as productive as possible as early as possible. Now you can receive - FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers - Ltd, and the world's leading authority on the world's leading RTOS. - - http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, - including FreeRTOS+Trace - an indispensable productivity tool, a DOS - compatible FAT file system, and our tiny thread aware UDP/IP stack. - - http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. - Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. - - http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High - Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS - licenses offer ticketed support, indemnification and commercial middleware. - - http://www.SafeRTOS.com - High Integrity Systems also provide a safety - engineered and independently SIL3 certified version for use in safety and - mission critical applications that require provable dependability. - - 1 tab == 4 spaces! -*/ - -/*----------------------------------------------------------- - * Simple IO routines to control the LEDs. - * This file is called ParTest.c for historic reasons. Originally it stood for - * PARallel port TEST. - *-----------------------------------------------------------*/ - -/* Scheduler includes. */ -#include "FreeRTOS.h" -#include "task.h" - -/* Demo includes. */ -#include "partest.h" - - -/* Don't have any real LEDs yet! */ -volatile uint64_t ullLEDToggles = 0; - -/*-----------------------------------------------------------*/ - -void vParTestInitialise( void ) -{ -} -/*-----------------------------------------------------------*/ - -void vParTestSetLED( UBaseType_t uxLED, BaseType_t xValue ) -{ -} -/*-----------------------------------------------------------*/ - -void vParTestToggleLED( unsigned portBASE_TYPE uxLED ) -{ - ullLEDToggles++; -} - - - diff --git a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/main.c b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/main.c index 724d4328d..a2189fcf1 100644 --- a/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/main.c +++ b/FreeRTOS/Demo/CORTEX_A53_64-bit_UltraScale_MPSoC/RTOSDemo_A53/src/main.c @@ -68,29 +68,14 @@ */ /****************************************************************************** - * This project provides two demo applications. A simple blinky style project, - * and a more comprehensive test and demo application. The - * mainSELECTED_APPLICATION setting (defined in this file) is used to select - * between the two. The simply blinky demo is implemented and described in - * main_blinky.c. The more comprehensive test and demo application is - * implemented and described in main_full.c. - * - * This file implements the code that is not demo specific, including the - * hardware setup and FreeRTOS hook functions. - * - * !!! IMPORTANT NOTE !!! - * Some GCC libraries can make use of the floating point registers. To avoid - * this causing corruption it is necessary to avoid their use. For this reason - * main.c contains very basic C implementations of the standard C library - * functions memset(), memcpy() and memcmp(), which are are used by FreeRTOS - * itself. Defining these functions in the project prevents the linker pulling - * them in from the library. Any other standard C library functions that are - * used by the application must likewise be defined in C. - * - * ENSURE TO READ THE DOCUMENTATION PAGE FOR THIS PORT AND DEMO APPLICATION ON - * THE http://www.FreeRTOS.org WEB SITE FOR FULL INFORMATION ON USING THIS DEMO - * APPLICATION, AND ITS ASSOCIATE FreeRTOS ARCHITECTURE PORT! + * NOTE 1: This project provides two demo applications. A simple blinky + * style project, and a more comprehensive test and demo application. The + * mainSELECTED_APPLICATION setting in main.c is used to select between the two. + * See the notes on using mainSELECTED_APPLICATION where it is defined below. * + * NOTE 2: This file only contains the source code that is not specific to + * either the simply blinky or full demos - this includes initialisation code + * and callback functions. */ /* Standard includes. */ @@ -99,14 +84,6 @@ /* Scheduler include files. */ #include "FreeRTOS.h" #include "task.h" -#include "semphr.h" - -/* Standard demo includes. */ -#include "partest.h" -#include "QueueOverwrite.h" -#include "EventGroupsDemo.h" -#include "TaskNotify.h" -#include "IntSemTest.h" /* Xilinx includes. */ #include "platform.h" @@ -122,7 +99,7 @@ * When mainSELECTED_APPLICATION is set to 1 the comprehensive test and demo * application will be run. */ -#define mainSELECTED_APPLICATION 0 +#define mainSELECTED_APPLICATION 1 /*-----------------------------------------------------------*/ @@ -249,46 +226,65 @@ volatile size_t xFreeHeapSpace; } /*-----------------------------------------------------------*/ -void vAssertCalled( const char * pcFile, unsigned long ulLine ) +void vApplicationTickHook( void ) { -volatile unsigned long ul = 0; - - ( void ) pcFile; - ( void ) ulLine; - - taskENTER_CRITICAL(); + #if( mainSELECTED_APPLICATION == 1 ) { - #if( configUSE_TRACE_FACILITY == 1 ) - { - vTraceStop(); - } - #endif - - /* Set ul to a non-zero value using the debugger to step out of this - function. */ - while( ul == 0 ) - { - portNOP(); - } + /* Only the comprehensive demo actually uses the tick hook. */ + extern void vFullDemoTickHook( void ); + vFullDemoTickHook(); } - taskEXIT_CRITICAL(); + #endif } /*-----------------------------------------------------------*/ -void vApplicationTickHook( void ) +/* configUSE_STATIC_ALLOCATION is set to 1, so the application must provide an +implementation of vApplicationGetIdleTaskMemory() to provide the memory that is +used by the Idle task. */ +void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) { - #if( mainSELECTED_APPLICATION == 1 ) - { - /* Call the periodic event group from ISR demo. */ - vPeriodicEventGroupsProcessing(); - - /* Use task notifications from an interrupt. */ - xNotifyTaskFromISR(); +/* If the buffers to be provided to the Idle task are declared inside this +function then they must be declared static - otherwise they will be allocated on +the stack and so not exists after this function exits. */ +static StaticTask_t xIdleTaskTCB; +static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle task's + state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} +/*-----------------------------------------------------------*/ - /* Use mutexes from interrupts. */ - vInterruptSemaphorePeriodicTest(); - } - #endif +/* configUSE_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the +application must provide an implementation of vApplicationGetTimerTaskMemory() +to provide the memory that is used by the Timer service task. */ +void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) +{ +/* If the buffers to be provided to the Timer task are declared inside this +function then they must be declared static - otherwise they will be allocated on +the stack and so not exists after this function exits. */ +static StaticTask_t xTimerTaskTCB; +static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Timer + task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; } /*-----------------------------------------------------------*/ @@ -350,3 +346,10 @@ volatile size_t x; } /*-----------------------------------------------------------*/ +void vMainAssertCalled( const char *pcFileName, uint32_t ulLineNumber ) +{ + xil_printf( "ASSERT! Line %lu of file %s\r\n", ulLineNumber, pcFileName ); + taskENTER_CRITICAL(); + for( ;; ); +} + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/.cproject b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/.cproject new file mode 100644 index 000000000..e67ed8330 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/.cproject @@ -0,0 +1,178 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/.project b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/.project new file mode 100644 index 000000000..19cf84fa4 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/.project @@ -0,0 +1,267 @@ + + + RTOSDemo_R5 + Created by SDK v2016.1. RTOSDemo_R5_bsp - psu_cortexr5_0 + + RTOSDemo_R5_bsp + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + src/FreeRTOS_Source + 2 + FREERTOS_ROOT/FreeRTOS/Source + + + src/Full_Demo/Standard_Demo_Tasks + 2 + FREERTOS_ROOT/FreeRTOS/Demo/Common/Minimal + + + src/Full_Demo/Standard_Demo_Tasks/include + 2 + FREERTOS_ROOT/FreeRTOS/Demo/Common/include + + + + + 1462455164616 + src/FreeRTOS_Source + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-event_groups.c + + + + 1462455164616 + src/FreeRTOS_Source + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-list.c + + + + 1462455164726 + src/FreeRTOS_Source + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-queue.c + + + + 1462455164766 + src/FreeRTOS_Source + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-tasks.c + + + + 1462455164786 + src/FreeRTOS_Source + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-timers.c + + + + 1462455201203 + src/FreeRTOS_Source/portable + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-MemMang + + + + 1462455201293 + src/FreeRTOS_Source/portable + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-GCC + + + + 1462461825645 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-AbortDelay.c + + + + 1462461825653 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-blocktim.c + + + + 1462461825660 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-countsem.c + + + + 1462461825677 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-dynamic.c + + + + 1462461825687 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-EventGroupsDemo.c + + + + 1462461825706 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-flop.c + + + + 1462461825718 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-GenQTest.c + + + + 1462461825723 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-IntQueue.c + + + + 1462461825728 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-IntSemTest.c + + + + 1462461825733 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-recmutex.c + + + + 1462461825757 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-semtest.c + + + + 1462461825757 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-StaticAllocation.c + + + + 1462461825757 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-TaskNotify.c + + + + 1462461825767 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-TimerDemo.c + + + + 1462461825787 + src/Full_Demo/Standard_Demo_Tasks + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-QueueOverwrite.c + + + + 1462455232956 + src/FreeRTOS_Source/portable/GCC + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-ARM_CR5 + + + + 1462455929868 + src/FreeRTOS_Source/portable/MemMang + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-heap_4.c + + + + + + FREERTOS_ROOT + $%7BPARENT-4-PROJECT_LOC%7D + + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Blinky_Demo/main_blinky.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Blinky_Demo/main_blinky.c new file mode 100644 index 000000000..d5d8aad77 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Blinky_Demo/main_blinky.c @@ -0,0 +1,227 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/****************************************************************************** + * NOTE 1: This project provides two demo applications. A simple blinky + * style project, and a more comprehensive test and demo application. The + * mainSELECTED_APPLICATION setting in main.c is used to select between the + * two. See the notes on using mainSELECTED_APPLICATION in main.c. This file + * implements the simply blinky style version. + * + * NOTE 2: This file only contains the source code that is specific to the + * simple demo. Generic functions, such FreeRTOS hook functions, and functions + * required to configure the hardware are defined in main.c. + ****************************************************************************** + * + * main_blinky() creates one queue, and two tasks. It then starts the + * scheduler. + * + * The Queue Send Task: + * The queue send task is implemented by the prvQueueSendTask() function in + * this file. prvQueueSendTask() sits in a loop that causes it to repeatedly + * block for 200 milliseconds, before sending the value 100 to the queue that + * was created within main_blinky(). Once the value is sent, the task loops + * back around to block for another 200 milliseconds...and so on. + * + * The Queue Receive Task: + * The queue receive task is implemented by the prvQueueReceiveTask() function + * in this file. prvQueueReceiveTask() sits in a loop where it repeatedly + * blocks on attempts to read data from the queue that was created within + * main_blinky(). When data is received, the task checks the value of the + * data, and if the value equals the expected 100, outputs a message to the + * UART. The 'block time' parameter passed to the queue receive function + * specifies that the task should be held in the Blocked state indefinitely to + * wait for data to be available on the queue. The queue receive task will only + * leave the Blocked state when the queue send task writes to the queue. As the + * queue send task writes to the queue every 200 milliseconds, the queue receive + * task leaves the Blocked state every 200 milliseconds, and therefore outputs + * a message every 200 milliseconds. + */ + +/* Kernel includes. */ +#include "FreeRTOS.h" +#include "task.h" +#include "semphr.h" + +/* Xilinx includes. */ +#include "xil_printf.h" + +/* Priorities at which the tasks are created. */ +#define mainQUEUE_RECEIVE_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 ) +#define mainQUEUE_SEND_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 ) + +/* The rate at which data is sent to the queue. The 200ms value is converted +to ticks using the portTICK_PERIOD_MS constant. */ +#define mainQUEUE_SEND_FREQUENCY_MS pdMS_TO_TICKS( 200 ) + +/* The number of items the queue can hold. This is 1 as the receive task +will remove items as they are added, meaning the send task should always find +the queue empty. */ +#define mainQUEUE_LENGTH ( 1 ) + +/*-----------------------------------------------------------*/ + +/* + * The tasks as described in the comments at the top of this file. + */ +static void prvQueueReceiveTask( void *pvParameters ); +static void prvQueueSendTask( void *pvParameters ); + +/*-----------------------------------------------------------*/ + +/* The queue used by both tasks. */ +static QueueHandle_t xQueue = NULL; + +/*-----------------------------------------------------------*/ + +void main_blinky( void ) +{ + /* Create the queue. */ + xQueue = xQueueCreate( mainQUEUE_LENGTH, sizeof( uint32_t ) ); + + if( xQueue != NULL ) + { + /* Start the two tasks as described in the comments at the top of this + file. */ + xTaskCreate( prvQueueReceiveTask, /* The function that implements the task. */ + "Rx", /* The text name assigned to the task - for debug only as it is not used by the kernel. */ + configMINIMAL_STACK_SIZE, /* The size of the stack to allocate to the task. */ + NULL, /* The parameter passed to the task - not used in this case. */ + mainQUEUE_RECEIVE_TASK_PRIORITY, /* The priority assigned to the task. */ + NULL ); /* The task handle is not required, so NULL is passed. */ + + xTaskCreate( prvQueueSendTask, "TX", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_SEND_TASK_PRIORITY, NULL ); + + /* Start the tasks and timer running. */ + vTaskStartScheduler(); + } + + /* If all is well, the scheduler will now be running, and the following + line will never be reached. If the following line does execute, then + there was either insufficient FreeRTOS heap memory available for the idle + and/or timer tasks to be created, or vTaskStartScheduler() was called from + User mode. See the memory management section on the FreeRTOS web site for + more details on the FreeRTOS heap http://www.freertos.org/a00111.html. The + mode from which main() is called is set in the C start up code and must be + a privileged mode (not user mode). */ + for( ;; ); +} +/*-----------------------------------------------------------*/ + +static void prvQueueSendTask( void *pvParameters ) +{ +TickType_t xNextWakeTime; +const uint32_t ulValueToSend = 100UL; + + /* Remove compiler warning about unused parameter. */ + ( void ) pvParameters; + + /* Initialise xNextWakeTime - this only needs to be done once. */ + xNextWakeTime = xTaskGetTickCount(); + + for( ;; ) + { + /* Place this task in the blocked state until it is time to run again. */ + vTaskDelayUntil( &xNextWakeTime, mainQUEUE_SEND_FREQUENCY_MS ); + + /* Send to the queue - causing the queue receive task to unblock and + toggle the LED. 0 is used as the block time so the sending operation + will not block - it shouldn't need to block as the queue should always + be empty at this point in the code. */ + xQueueSend( xQueue, &ulValueToSend, 0U ); + } +} +/*-----------------------------------------------------------*/ + +static void prvQueueReceiveTask( void *pvParameters ) +{ +uint32_t ulReceivedValue; +const uint32_t ulExpectedValue = 100UL; + + /* Remove compiler warning about unused parameter. */ + ( void ) pvParameters; + + for( ;; ) + { + /* Wait until something arrives in the queue - this task will block + indefinitely provided INCLUDE_vTaskSuspend is set to 1 in + FreeRTOSConfig.h. */ + xQueueReceive( xQueue, &ulReceivedValue, portMAX_DELAY ); + + /* To get here something must have been received from the queue, but is + it the expected value? If it is, toggle the LED. */ + if( ulReceivedValue == ulExpectedValue ) + { + xil_printf( "100 received\r\n" ); + ulReceivedValue = 0U; + } + } +} +/*-----------------------------------------------------------*/ + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOSConfig.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOSConfig.h new file mode 100644 index 000000000..2b8292a61 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOSConfig.h @@ -0,0 +1,222 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +#include "xparameters.h" + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +/* + * The FreeRTOS Cortex-A port implements a full interrupt nesting model. + * + * Interrupts that are assigned a priority at or below + * configMAX_API_CALL_INTERRUPT_PRIORITY (which counter-intuitively in the ARM + * generic interrupt controller [GIC] means a priority that has a numerical + * value above configMAX_API_CALL_INTERRUPT_PRIORITY) can call FreeRTOS safe API + * functions and will nest. + * + * Interrupts that are assigned a priority above + * configMAX_API_CALL_INTERRUPT_PRIORITY (which in the GIC means a numerical + * value below configMAX_API_CALL_INTERRUPT_PRIORITY) cannot call any FreeRTOS + * API functions, will nest, and will not be masked by FreeRTOS critical + * sections (although it is necessary for interrupts to be globally disabled + * extremely briefly as the interrupt mask is updated in the GIC). + * + * FreeRTOS functions that can be called from an interrupt are those that end in + * "FromISR". FreeRTOS maintains a separate interrupt safe API to enable + * interrupt entry to be shorter, faster, simpler and smaller. + * + * For the purpose of setting configMAX_API_CALL_INTERRUPT_PRIORITY 255 + * represents the lowest priority. + */ +#define configMAX_API_CALL_INTERRUPT_PRIORITY 18 + + +#define configCPU_CLOCK_HZ 100000000UL +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#define configUSE_TICKLESS_IDLE 0 +#define configTICK_RATE_HZ ( ( TickType_t ) 1000 ) +#define configPERIPHERAL_CLOCK_HZ ( 33333000UL ) +#define configUSE_PREEMPTION 1 +#define configUSE_IDLE_HOOK 1 +#define configUSE_TICK_HOOK 1 +#define configMAX_PRIORITIES ( 7 ) +#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 200 ) +#define configTOTAL_HEAP_SIZE ( 50 * 1024 ) +#define configMAX_TASK_NAME_LEN ( 10 ) +#define configUSE_TRACE_FACILITY 1 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configQUEUE_REGISTRY_SIZE 8 +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_MALLOC_FAILED_HOOK 1 +#define configUSE_APPLICATION_TASK_TAG 0 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configUSE_QUEUE_SETS 1 +#define configUSE_TASK_NOTIFICATIONS 1 + +/* This demo creates RTOS objects using both static and dynamic allocation. */ +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 /* Defaults to 1 anyway. */ + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) + +/* Software timer definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) +#define configTIMER_QUEUE_LENGTH 5 +#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 ) + +/* Set the following definitions to 1 to include the API function, or zero +to exclude the API function. */ +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 1 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTimerPendFunctionCall 1 +#define INCLUDE_eTaskGetState 1 +#define INCLUDE_xTaskAbortDelay 1 +#define INCLUDE_xTaskGetHandle 1 + +/* This demo makes use of one or more example stats formatting functions. These +format the raw data provided by the uxTaskGetSystemState() function in to human +readable ASCII form. See the notes in the implementation of vTaskList() within +FreeRTOS/Source/tasks.c for limitations. */ +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Run time stats are not generated. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS and +portGET_RUN_TIME_COUNTER_VALUE must be defined if configGENERATE_RUN_TIME_STATS +is set to 1. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() +#define portGET_RUN_TIME_COUNTER_VALUE() + +/* The size of the global output buffer that is available for use when there +are multiple command interpreters running at once (for example, one on a UART +and one on TCP/IP). This is done to prevent an output buffer being defined by +each implementation - which would waste RAM. In this case, there is only one +command interpreter running. */ +#define configCOMMAND_INT_MAX_OUTPUT_SIZE 2096 + +/* Normal assert() semantics without relying on the provision of an assert.h +header file. */ +void vMainAssertCalled( const char *pcFileName, uint32_t ulLineNumber ); +#define configASSERT( x ) if( ( x ) == 0 ) { vMainAssertCalled( __FILE__, __LINE__ ); } + +/* If configTASK_RETURN_ADDRESS is not defined then a task that attempts to +return from its implementing function will end up in a "task exit error" +function - which contains a call to configASSERT(). However this can give GCC +some problems when it tries to unwind the stack, as the exit error function has +nothing to return to. To avoid this define configTASK_RETURN_ADDRESS to 0. */ +#define configTASK_RETURN_ADDRESS NULL + + +/****** Hardware specific settings. *******************************************/ + +/* + * The application must provide a function that configures a peripheral to + * create the FreeRTOS tick interrupt, then define configSETUP_TICK_INTERRUPT() + * in FreeRTOSConfig.h to call the function. This file contains a function + * that is suitable for use on the Zynq MPU. FreeRTOS_Tick_Handler() must + * be installed as the peripheral's interrupt handler. + */ +void vConfigureTickInterrupt( void ); +#define configSETUP_TICK_INTERRUPT() vConfigureTickInterrupt() + +void vClearTickInterrupt( void ); +#define configCLEAR_TICK_INTERRUPT() vClearTickInterrupt() + +/* The following constant describe the hardware, and are correct for the +Zynq MPU. */ +#define configINTERRUPT_CONTROLLER_BASE_ADDRESS ( XPAR_SCUGIC_0_DIST_BASEADDR ) +#define configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET ( 0x1000 ) +#define configUNIQUE_INTERRUPT_PRIORITIES 32 + + +#endif /* FREERTOS_CONFIG_H */ + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOS_asm_vectors.S b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOS_asm_vectors.S new file mode 100644 index 000000000..14222fb20 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOS_asm_vectors.S @@ -0,0 +1,103 @@ +/****************************************************************************** +* +* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* @file asm_vectors.s +* +* This file contains the initial vector table for the Cortex R5 processor +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------- -------- ---------------------------------------------------
+* 5.00  pkp	02/10/14 Initial version
+*
+* +* @note +* +* None. +* +******************************************************************************/ +.org 0 +.text + +.globl _boot +.globl _freertos_vector_table + +.globl FreeRTOS_FIQInterrupt +.globl FreeRTOS_DataAbortHandler +.globl FreeRTOS_PrefetchAbortHandler +.globl vPortInstallFreeRTOSVectorTable + +.globl IRQHandler +.globl prof_pc + +.extern FreeRTOS_IRQ_Handler +.extern FreeRTOS_SWI_Handler + + +.section .freertos_vectors +_freertos_vector_table: + ldr pc,=_boot + ldr pc,=FreeRTOS_Undefined + LDR pc, _swi + ldr pc,=FreeRTOS_PrefetchAbortHandler + ldr pc,=FreeRTOS_DataAbortHandler + NOP /* Placeholder for address exception vector*/ + LDR pc, _irq + ldr pc,=FreeRTOS_FIQHandler + +_irq: .word FreeRTOS_IRQ_Handler +_swi: .word FreeRTOS_SWI_Handler + + +.text + +FreeRTOS_FIQHandler: /* FIQ vector handler */ + stmdb sp!,{r0-r3,r12,lr} /* state save from compiled code */ +FreeRTOS_FIQLoop: + bl FIQInterrupt /* FIQ vector */ + ldmia sp!,{r0-r3,r12,lr} /* state restore from compiled code */ + subs pc, lr, #4 /* adjust return */ + +FreeRTOS_Undefined: /* Undefined handler */ + b FreeRTOS_Undefined + +FreeRTOS_DataAbortHandler: /* Data Abort handler */ + b FreeRTOS_DataAbortHandler + +FreeRTOS_PrefetchAbortHandler: /* Prefetch Abort handler */ + b FreeRTOS_PrefetchAbortHandler + + +.end diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOS_tick_config.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOS_tick_config.c new file mode 100644 index 000000000..e55323fd6 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/FreeRTOS_tick_config.c @@ -0,0 +1,177 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "Task.h" + +/* Xilinx includes. */ +#include "xscugic.h" +#include "xttcps.h" + +/* Settings to generate the tick from channel 0 of TTC 0. */ +#define tickTTC_ID XPAR_PSU_TTC_0_DEVICE_ID +#define tickINTERRUPT_ID XPAR_XTTCPS_0_INTR + +/* The timer used to generate the tick interrupt. */ +static XTtcPs xTimerInstance; + +/* + * The application must provide a function that configures a peripheral to + * create the FreeRTOS tick interrupt, then define configSETUP_TICK_INTERRUPT() + * in FreeRTOSConfig.h to call the function. This file contains a function + * that is suitable for use on the Zynq SoC. + */ +void vConfigureTickInterrupt( void ) +{ +XTtcPs_Config *pxTimerConfig; +BaseType_t xStatus; +XScuGic_Config *pxGICConfig; +static XScuGic xInterruptController; /* Interrupt controller instance */ +uint16_t usInterval; +uint8_t ucPrescale = 0; +const uint8_t ucRisingEdge = 3; + + /* This function is called with the IRQ interrupt disabled, and the IRQ + interrupt should be left disabled. It is enabled automatically when the + scheduler is started. */ + + /* Ensure XScuGic_CfgInitialize() has been called. In this demo it has + already been called from prvSetupHardware() in main(). */ + pxGICConfig = XScuGic_LookupConfig( XPAR_SCUGIC_SINGLE_DEVICE_ID ); + xStatus = XScuGic_CfgInitialize( &xInterruptController, pxGICConfig, pxGICConfig->CpuBaseAddress ); + configASSERT( xStatus == XST_SUCCESS ); + ( void ) xStatus; /* Remove compiler warning if configASSERT() is not defined. */ + + /* The interrupt priority must be the lowest possible. */ + XScuGic_SetPriorityTriggerType( &xInterruptController, tickINTERRUPT_ID, portLOWEST_USABLE_INTERRUPT_PRIORITY << portPRIORITY_SHIFT, ucRisingEdge ); + + /* Install the FreeRTOS tick handler. */ + xStatus = XScuGic_Connect( &xInterruptController, tickINTERRUPT_ID, (Xil_ExceptionHandler) FreeRTOS_Tick_Handler, NULL ); + configASSERT( xStatus == XST_SUCCESS ); + ( void ) xStatus; /* Remove compiler warning if configASSERT() is not defined. */ + + /* Initialise the Triple Timer Counter (TTC) that is going to be used to + generate the tick interrupt. */ + pxTimerConfig = XTtcPs_LookupConfig( tickTTC_ID ); + xStatus = XTtcPs_CfgInitialize( &xTimerInstance, pxTimerConfig, pxTimerConfig->BaseAddress ); + configASSERT( xStatus == XST_SUCCESS ); + ( void ) xStatus; /* Remove compiler warning if configASSERT() is not defined. */ + + /* Configure the interval to be the require tick rate. */ + XTtcPs_CalcIntervalFromFreq( &xTimerInstance, configTICK_RATE_HZ, &usInterval, &ucPrescale ); + XTtcPs_SetInterval( &xTimerInstance, usInterval ); + XTtcPs_SetPrescaler( &xTimerInstance, ucPrescale ); + + /* Interval mode used. */ + XTtcPs_SetOptions( &xTimerInstance, XTTCPS_OPTION_INTERVAL_MODE | XTTCPS_OPTION_WAVE_DISABLE ); + + /* Start the timer. */ + XTtcPs_Start( &xTimerInstance ); + + /* Enable the interrupt in the interrupt controller. */ + XScuGic_Enable( &xInterruptController, tickINTERRUPT_ID ); + + /* Enable the interrupt in the timer itself. */ + XTtcPs_EnableInterrupts( &xTimerInstance, XTTCPS_IXR_INTERVAL_MASK ); +} +/*-----------------------------------------------------------*/ + +void vClearTickInterrupt( void ) +{ +volatile uint32_t ulStatus; + + ulStatus = XTtcPs_GetInterruptStatus( &xTimerInstance ); + ( void ) ulStatus; +} +/*-----------------------------------------------------------*/ + +void vApplicationIRQHandler( uint32_t ulICCIAR ) +{ +extern const XScuGic_Config XScuGic_ConfigTable[]; +static const XScuGic_VectorTableEntry *pxVectorTable = XScuGic_ConfigTable[ XPAR_SCUGIC_SINGLE_DEVICE_ID ].HandlerTable; +uint32_t ulInterruptID; +const XScuGic_VectorTableEntry *pxVectorEntry; + + /* Re-enable interrupts. */ + __asm ( "cpsie i" ); + + /* The ID of the interrupt is obtained by bitwise anding the ICCIAR value + with 0x3FF. */ + ulInterruptID = ulICCIAR & 0x3FFUL; + if( ulInterruptID < XSCUGIC_MAX_NUM_INTR_INPUTS ) + { + /* Call the function installed in the array of installed handler + functions. */ + pxVectorEntry = &( pxVectorTable[ ulInterruptID ] ); + pxVectorEntry->Handler( pxVectorEntry->CallBackRef ); + } +} + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/IntQueueTimer.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/IntQueueTimer.c new file mode 100644 index 000000000..732b7cea7 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/IntQueueTimer.c @@ -0,0 +1,266 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/* + * This file initialises three timers as follows: + * + * Timer 0 and Timer 1 provide the interrupts that are used with the IntQ + * standard demo tasks, which test interrupt nesting and using queues from + * interrupts. Both these interrupts operate below the maximum syscall + * interrupt priority. + * + * Timer 2 is a much higher frequency timer that tests the nesting of interrupts + * that execute above the maximum syscall interrupt priority. + * + * All the timers can nest with the tick interrupt - creating a maximum + * interrupt nesting depth of 4. + * + * For convenience, the high frequency timer is also used to provide the time + * base for the run time stats. + */ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +/* Demo includes. */ +#include "IntQueueTimer.h" +#include "IntQueue.h" + +/* Xilinx includes. */ +#include "xttcps.h" +#include "xscugic.h" + +/* The frequencies at which the first two timers expire are slightly offset to +ensure they don't remain synchronised. The frequency of the interrupt that +operates above the max syscall interrupt priority is 10 times faster so really +hammers the interrupt entry and exit code. */ +#define tmrTIMERS_USED 3 +#define tmrTIMER_0_FREQUENCY ( 2000UL ) +#define tmrTIMER_1_FREQUENCY ( 2001UL ) +#define tmrTIMER_2_FREQUENCY ( 20000UL ) + +/*-----------------------------------------------------------*/ + +/* + * The single interrupt service routines that is used to service all three + * timers. + */ +static void prvTimerHandler( void *CallBackRef ); + +/*-----------------------------------------------------------*/ + +/* Hardware constants. */ +static const BaseType_t xDeviceIDs[ tmrTIMERS_USED ] = { XPAR_XTTCPS_2_DEVICE_ID, XPAR_XTTCPS_3_DEVICE_ID, XPAR_XTTCPS_4_DEVICE_ID }; +static const BaseType_t xInterruptIDs[ tmrTIMERS_USED ] = { XPAR_XTTCPS_2_INTR, XPAR_XTTCPS_3_INTR, XPAR_XTTCPS_4_INTR }; + +/* Timer configuration settings. */ +typedef struct +{ + uint32_t OutputHz; /* Output frequency. */ + uint16_t Interval; /* Interval value. */ + uint8_t Prescaler; /* Prescaler value. */ + uint16_t Options; /* Option settings. */ +} TmrCntrSetup; + +static TmrCntrSetup xTimerSettings[ tmrTIMERS_USED ] = +{ + { tmrTIMER_0_FREQUENCY, 0, 0, XTTCPS_OPTION_INTERVAL_MODE | XTTCPS_OPTION_WAVE_DISABLE }, + { tmrTIMER_1_FREQUENCY, 0, 0, XTTCPS_OPTION_INTERVAL_MODE | XTTCPS_OPTION_WAVE_DISABLE }, + { tmrTIMER_2_FREQUENCY, 0, 0, XTTCPS_OPTION_INTERVAL_MODE | XTTCPS_OPTION_WAVE_DISABLE } +}; + +/* Lower priority number means higher logical priority, so +configMAX_API_CALL_INTERRUPT_PRIORITY - 1 is above the maximum system call +interrupt priority. */ +static const UBaseType_t uxInterruptPriorities[ tmrTIMERS_USED ] = +{ + configMAX_API_CALL_INTERRUPT_PRIORITY + 1, + configMAX_API_CALL_INTERRUPT_PRIORITY, + configMAX_API_CALL_INTERRUPT_PRIORITY - 1 +}; + +static XTtcPs xTimerInstances[ tmrTIMERS_USED ]; + +/* Used to provide a means of ensuring the intended interrupt nesting depth is +actually being reached. */ +extern uint32_t ulPortInterruptNesting; +static uint32_t ulMaxRecordedNesting = 0; + +/* Used to ensure the high frequency timer is running at the expected +frequency. */ +static volatile uint32_t ulHighFrequencyTimerCounts = 0; + +/*-----------------------------------------------------------*/ + +void vInitialiseTimerForIntQueueTest( void ) +{ +BaseType_t xStatus; +TmrCntrSetup *pxTimerSettings; +extern XScuGic xInterruptController; +BaseType_t xTimer; +XTtcPs *pxTimerInstance; +XTtcPs_Config *pxTimerConfiguration; +const uint8_t ucRisingEdge = 3; + + for( xTimer = 0; xTimer < tmrTIMERS_USED; xTimer++ ) + { + /* Look up the timer's configuration. */ + pxTimerInstance = &( xTimerInstances[ xTimer ] ); + pxTimerConfiguration = XTtcPs_LookupConfig( xDeviceIDs[ xTimer ] ); + configASSERT( pxTimerConfiguration ); + + pxTimerSettings = &( xTimerSettings[ xTimer ] ); + + /* Initialise the device. */ + xStatus = XTtcPs_CfgInitialize( pxTimerInstance, pxTimerConfiguration, pxTimerConfiguration->BaseAddress ); + if( xStatus != XST_SUCCESS ) + { + /* Not sure how to do this before XTtcPs_CfgInitialize is called + as pxTimerInstance is set within XTtcPs_CfgInitialize(). */ + XTtcPs_Stop( pxTimerInstance ); + xStatus = XTtcPs_CfgInitialize( pxTimerInstance, pxTimerConfiguration, pxTimerConfiguration->BaseAddress ); + configASSERT( xStatus == XST_SUCCESS ); + } + + /* Set the options. */ + XTtcPs_SetOptions( pxTimerInstance, pxTimerSettings->Options ); + + /* The timer frequency is preset in the pxTimerSettings structure. + Derive the values for the other structure members. */ + XTtcPs_CalcIntervalFromFreq( pxTimerInstance, pxTimerSettings->OutputHz, &( pxTimerSettings->Interval ), &( pxTimerSettings->Prescaler ) ); + + /* Set the interval and prescale. */ + XTtcPs_SetInterval( pxTimerInstance, pxTimerSettings->Interval ); + XTtcPs_SetPrescaler( pxTimerInstance, pxTimerSettings->Prescaler ); + + /* The priority must be the lowest possible. */ + XScuGic_SetPriorityTriggerType( &xInterruptController, xInterruptIDs[ xTimer ], uxInterruptPriorities[ xTimer ] << portPRIORITY_SHIFT, ucRisingEdge ); + + /* Connect to the interrupt controller. */ + xStatus = XScuGic_Connect( &xInterruptController, xInterruptIDs[ xTimer ], ( Xil_InterruptHandler ) prvTimerHandler, ( void * ) pxTimerInstance ); + configASSERT( xStatus == XST_SUCCESS); + + /* Enable the interrupt in the GIC. */ + XScuGic_Enable( &xInterruptController, xInterruptIDs[ xTimer ] ); + + /* Enable the interrupts in the timer. */ + XTtcPs_EnableInterrupts( pxTimerInstance, XTTCPS_IXR_INTERVAL_MASK ); + + /* Start the timer. */ + XTtcPs_Start( pxTimerInstance ); + } +} +/*-----------------------------------------------------------*/ + +static void prvTimerHandler( void *pvCallBackRef ) +{ +uint32_t ulInterruptStatus; +XTtcPs *pxTimer = ( XTtcPs * ) pvCallBackRef; +BaseType_t xYieldRequired; + + /* Read the interrupt status, then write it back to clear the interrupt. */ + ulInterruptStatus = XTtcPs_GetInterruptStatus( pxTimer ); + XTtcPs_ClearInterruptStatus( pxTimer, ulInterruptStatus ); + + /* Only one interrupt event type is expected. */ + configASSERT( ( XTTCPS_IXR_INTERVAL_MASK & ulInterruptStatus ) != 0 ); + + /* Check the device ID to know which IntQueue demo to call. */ + if( pxTimer->Config.DeviceId == xDeviceIDs[ 0 ] ) + { + xYieldRequired = xFirstTimerHandler(); + } + else if( pxTimer->Config.DeviceId == xDeviceIDs[ 1 ] ) + { + xYieldRequired = xSecondTimerHandler(); + } + else + { + /* Used to check the timer is running at the expected frequency. */ + ulHighFrequencyTimerCounts++; + + /* Latch the highest interrupt nesting count detected. */ + if( ulPortInterruptNesting > ulMaxRecordedNesting ) + { + ulMaxRecordedNesting = ulPortInterruptNesting; + } + + xYieldRequired = pdFALSE; + } + + /* If xYieldRequired is not pdFALSE then calling either xFirstTimerHandler() + or xSecondTimerHandler() resulted in a task leaving the blocked state and + the task that left the blocked state had a priority higher than the currently + running task (the task this interrupt interrupted) - so a context switch + should be performed so the interrupt returns directly to the higher priority + task. xYieldRequired is tested inside the following macro. */ + portYIELD_FROM_ISR( xYieldRequired ); +} + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/IntQueueTimer.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/IntQueueTimer.h new file mode 100644 index 000000000..4b16bc503 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/IntQueueTimer.h @@ -0,0 +1,78 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef INT_QUEUE_TIMER_H +#define INT_QUEUE_TIMER_H + +void vInitialiseTimerForIntQueueTest( void ); +portBASE_TYPE xTimer0Handler( void ); +portBASE_TYPE xTimer1Handler( void ); + +#endif + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/main_full.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/main_full.c new file mode 100644 index 000000000..73a4dc06a --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/main_full.c @@ -0,0 +1,502 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/****************************************************************************** + * NOTE 1: This project provides two demo applications. A simple blinky + * style project, and a more comprehensive test and demo application. The + * mainSELECTED_APPLICATION setting in main.c is used to select between the two. + * See the notes on using mainSELECTED_APPLICATION in main.c. This file + * implements the comprehensive version. + * + * NOTE 2: This file only contains the source code that is specific to the + * full demo. Generic functions, such FreeRTOS hook functions, and functions + * required to configure the hardware, are defined in main.c. + * + * NOTE 3: The full demo includes a test that checks the floating point context + * is maintained correctly across task switches. The standard GCC libraries can + * use floating point registers and made this test fail (unless the tasks that + * use the library are given a floating point context as described on the + * documentation page for this demo). + * + ****************************************************************************** + * + * main_full() creates all the demo application tasks and software timers, then + * starts the scheduler. The web documentation provides more details of the + * standard demo application tasks, which provide no particular functionality, + * but do provide a good example of how to use the FreeRTOS API. + * + * In addition to the standard demo tasks, the following tasks and tests are + * defined and/or created within this file: + * + * "Reg test" tasks - These fill both the core and floating point registers with + * known values, then check that each register maintains its expected value for + * the lifetime of the task. Each task uses a different set of values. The reg + * test tasks execute with a very low priority, so get preempted very + * frequently. A register containing an unexpected value is indicative of an + * error in the context switching mechanism. + * + * "Check" task - The check task period is set to five seconds. Each time it + * executes it checks all the standard demo tasks, and the register check tasks, + * are not only still executing, but are executing without reporting any errors, + * then outputs the system status to the UART. + */ + +/* Standard includes. */ +#include + +/* Kernel includes. */ +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "semphr.h" + +/* Standard demo application includes. */ +#include "flop.h" +#include "semtest.h" +#include "dynamic.h" +#include "blocktim.h" +#include "countsem.h" +#include "GenQTest.h" +#include "recmutex.h" +#include "IntQueue.h" +#include "EventGroupsDemo.h" +#include "TaskNotify.h" +#include "IntSemTest.h" +#include "StaticAllocation.h" +#include "AbortDelay.h" +#include "QueueOverwrite.h" +#include "TimerDemo.h" + +/* Xilinx includes. */ +#include "xil_printf.h" + +/* Priorities for the demo application tasks. */ +#define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + ( UBaseType_t ) 1 ) +#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + ( UBaseType_t ) 2 ) +#define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + ( UBaseType_t ) 3 ) +#define mainFLOP_TASK_PRIORITY ( tskIDLE_PRIORITY ) +#define mainUART_COMMAND_CONSOLE_STACK_SIZE ( configMINIMAL_STACK_SIZE * ( UBaseType_t ) 3 ) +#define mainCOM_TEST_TASK_PRIORITY ( tskIDLE_PRIORITY + ( UBaseType_t ) 2 ) +#define mainCHECK_TASK_PRIORITY ( configMAX_PRIORITIES - ( UBaseType_t ) 1 ) +#define mainQUEUE_OVERWRITE_PRIORITY ( tskIDLE_PRIORITY ) + +/* A block time of zero simply means "don't block". */ +#define mainDONT_BLOCK ( ( TickType_t ) 0 ) + +/* The period of the check task, in ms. */ +#define mainNO_ERROR_CHECK_TASK_PERIOD pdMS_TO_TICKS( ( TickType_t ) 5000 ) + +/* Parameters that are passed into the register check tasks solely for the +purpose of ensuring parameters are passed into tasks correctly. */ +#define mainREG_TEST_TASK_1_PARAMETER ( ( void * ) 0x12345678 ) +#define mainREG_TEST_TASK_2_PARAMETER ( ( void * ) 0x87654321 ) + +/* The base period used by the timer test tasks. */ +#define mainTIMER_TEST_PERIOD ( 50 ) + +/*-----------------------------------------------------------*/ + + +/* + * The check task, as described at the top of this file. + */ +static void prvCheckTask( void *pvParameters ); + +/* + * Register check tasks, and the tasks used to write over and check the contents + * of the FPU registers, as described at the top of this file. The nature of + * these files necessitates that they are written in an assembly file, but the + * entry points are kept in the C file for the convenience of checking the task + * parameter. + */ +static void prvRegTestTaskEntry1( void *pvParameters ); +extern void vRegTest1Implementation( void ); +static void prvRegTestTaskEntry2( void *pvParameters ); +extern void vRegTest2Implementation( void ); + +/* + * Register commands that can be used with FreeRTOS+CLI. The commands are + * defined in CLI-Commands.c and File-Related-CLI-Command.c respectively. + */ +extern void vRegisterSampleCLICommands( void ); + +/* + * The task that manages the FreeRTOS+CLI input and output. + */ +extern void vUARTCommandConsoleStart( uint16_t usStackSize, UBaseType_t uxPriority ); + +/* + * A high priority task that does nothing other than execute at a pseudo random + * time to ensure the other test tasks don't just execute in a repeating + * pattern. + */ +static void prvPseudoRandomiser( void *pvParameters ); + +/* + * The full demo uses the tick hook function to include test code in the tick + * interrupt. vFullDemoTickHook() is called by vApplicationTickHook(), which + * is defined in main.c. + */ +void vFullDemoTickHook( void ); + +/*-----------------------------------------------------------*/ + +/* The following two variables are used to communicate the status of the +register check tasks to the check task. If the variables keep incrementing, +then the register check tasks have not discovered any errors. If a variable +stops incrementing, then an error has been found. */ +volatile uint32_t ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL; + +/*-----------------------------------------------------------*/ + +void main_full( void ) +{ + /* Start all the other standard demo/test tasks. They have no particular + functionality, but do demonstrate how to use the FreeRTOS API and test the + kernel port. */ + vStartInterruptQueueTasks(); + vStartDynamicPriorityTasks(); + vCreateBlockTimeTasks(); + vStartCountingSemaphoreTasks(); + vStartGenericQueueTasks( tskIDLE_PRIORITY ); + vStartRecursiveMutexTasks(); + vStartSemaphoreTasks( mainSEM_TEST_PRIORITY ); + vStartMathTasks( mainFLOP_TASK_PRIORITY ); + vStartEventGroupTasks(); + vStartTaskNotifyTask(); + vStartInterruptSemaphoreTasks(); + vStartStaticallyAllocatedTasks(); + vCreateAbortDelayTasks(); + vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_PRIORITY ); + vStartTimerDemoTask( mainTIMER_TEST_PERIOD ); + + /* Create the register check tasks, as described at the top of this file */ + xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL ); + xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL ); + + /* Create the task that just adds a little random behaviour. */ + xTaskCreate( prvPseudoRandomiser, "Rnd", configMINIMAL_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL ); + + /* Create the task that performs the 'check' functionality, as described at + the top of this file. */ + xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL ); + + /* Start the scheduler. */ + vTaskStartScheduler(); + + /* If all is well, the scheduler will now be running, and the following + line will never be reached. If the following line does execute, then + there was either insufficient FreeRTOS heap memory available for the idle + and/or timer tasks to be created, or vTaskStartScheduler() was called from + User mode. See the memory management section on the FreeRTOS web site for + more details on the FreeRTOS heap http://www.freertos.org/a00111.html. The + mode from which main() is called is set in the C start up code and must be + a privileged mode (not user mode). */ + for( ;; ); +} +/*-----------------------------------------------------------*/ + +static void prvCheckTask( void *pvParameters ) +{ +TickType_t xDelayPeriod = mainNO_ERROR_CHECK_TASK_PERIOD; +TickType_t xLastExecutionTime; +static uint32_t ulLastRegTest1Value = 0, ulLastRegTest2Value = 0; +uint32_t ulErrorFound = pdFALSE; +const char *pcStatusString = "Pass"; + + /* Just to stop compiler warnings. */ + ( void ) pvParameters; + + /* Initialise xLastExecutionTime so the first call to vTaskDelayUntil() + works correctly. */ + xLastExecutionTime = xTaskGetTickCount(); + + /* Cycle for ever, delaying then checking all the other tasks are still + operating without error. The system status is written to the UART on each + iteration. */ + for( ;; ) + { + /* Delay until it is time to execute again. */ + vTaskDelayUntil( &xLastExecutionTime, xDelayPeriod ); + + /* Check all the demo tasks (other than the flash tasks) to ensure + that they are all still running, and that none have detected an error. */ + if( xAreIntQueueTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 0UL; + pcStatusString = "Error: IntQ"; + } + + if( xAreMathsTaskStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 1UL; + pcStatusString = "Error: Math"; + } + + if( xAreDynamicPriorityTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 2UL; + pcStatusString = "Error: Dynamic"; + } + + if ( xAreBlockTimeTestTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 4UL; + pcStatusString = "Error: Block Time"; + } + + if ( xAreGenericQueueTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 5UL; + pcStatusString = "Error: Generic Queue"; + } + + if ( xAreRecursiveMutexTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 6UL; + pcStatusString = "Error: Recursive Mutex"; + } + + if( xAreSemaphoreTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 8UL; + pcStatusString = "Error: Semaphore"; + } + + if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 10UL; + pcStatusString = "Error: Counting Semaphore"; + } + + if( xAreEventGroupTasksStillRunning() != pdPASS ) + { + ulErrorFound |= 1UL << 12UL; + pcStatusString = "Error: Event Group"; + } + + if( xAreTaskNotificationTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 13UL; + pcStatusString = "Error: Task Notifications"; + } + + if( xAreInterruptSemaphoreTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 14UL; + pcStatusString = "Error: Interrupt Semaphore"; + } + + if( xAreStaticAllocationTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 15UL; + pcStatusString = "Error: Static Allocation"; + } + + if( xAreAbortDelayTestTasksStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 16UL; + pcStatusString = "Error: Abort Delay"; + } + + if( xIsQueueOverwriteTaskStillRunning() != pdTRUE ) + { + ulErrorFound |= 1UL << 17UL; + pcStatusString = "Error: Queue Overwrite"; + } + + if( xAreTimerDemoTasksStillRunning( xDelayPeriod ) != pdTRUE ) + { + ulErrorFound |= 1UL << 18UL; + pcStatusString = "Error: Timer Demo"; + } + + /* Check that the register test 1 task is still running. */ + if( ulLastRegTest1Value == ulRegTest1LoopCounter ) + { + ulErrorFound |= 1UL << 19UL; + pcStatusString = "Error: Reg Test 1"; + } + ulLastRegTest1Value = ulRegTest1LoopCounter; + + /* Check that the register test 2 task is still running. */ + if( ulLastRegTest2Value == ulRegTest2LoopCounter ) + { + ulErrorFound |= 1UL << 20UL; + pcStatusString = "Error: Reg Test 2"; + } + ulLastRegTest2Value = ulRegTest2LoopCounter; + + /* Output the system status string. */ + xil_printf( "%s, status code = %lu, tick count = %lu\r\n", pcStatusString, ulErrorFound, xTaskGetTickCount() ); + + configASSERT( ulErrorFound == pdFALSE ); + } +} +/*-----------------------------------------------------------*/ + +static void prvRegTestTaskEntry1( void *pvParameters ) +{ + /* Although the regtest task is written in assembler, its entry point is + written in C for convenience of checking the task parameter is being passed + in correctly. */ + if( pvParameters == mainREG_TEST_TASK_1_PARAMETER ) + { + /* The reg test task also tests the floating point registers. Tasks + that use the floating point unit must call vPortTaskUsesFPU() before + any floating point instructions are executed. */ + vPortTaskUsesFPU(); + + /* Start the part of the test that is written in assembler. */ + vRegTest1Implementation(); + } + + /* The following line will only execute if the task parameter is found to + be incorrect. The check task will detect that the regtest loop counter is + not being incremented and flag an error. */ + vTaskDelete( NULL ); +} +/*-----------------------------------------------------------*/ + +static void prvRegTestTaskEntry2( void *pvParameters ) +{ + /* Although the regtest task is written in assembler, its entry point is + written in C for convenience of checking the task parameter is being passed + in correctly. */ + if( pvParameters == mainREG_TEST_TASK_2_PARAMETER ) + { + /* The reg test task also tests the floating point registers. Tasks + that use the floating point unit must call vPortTaskUsesFPU() before + any floating point instructions are executed. */ + vPortTaskUsesFPU(); + + /* Start the part of the test that is written in assembler. */ + vRegTest2Implementation(); + } + + /* The following line will only execute if the task parameter is found to + be incorrect. The check task will detect that the regtest loop counter is + not being incremented and flag an error. */ + vTaskDelete( NULL ); +} +/*-----------------------------------------------------------*/ + +static void prvPseudoRandomiser( void *pvParameters ) +{ +const uint32_t ulMultiplier = 0x015a4e35UL, ulIncrement = 1UL, ulMinDelay = pdMS_TO_TICKS( 95 ); +volatile uint32_t ulNextRand = ( uint32_t ) &pvParameters, ulValue; + + /* This task does nothing other than ensure there is a little bit of + disruption in the scheduling pattern of the other tasks. Normally this is + done by generating interrupts at pseudo random times. */ + for( ;; ) + { + ulNextRand = ( ulMultiplier * ulNextRand ) + ulIncrement; + ulValue = ( ulNextRand >> 16UL ) & 0xffUL; + + if( ulValue < ulMinDelay ) + { + ulValue = ulMinDelay; + } + + vTaskDelay( ulValue ); + + while( ulValue > 0 ) + { + __asm volatile( "NOP" ); + __asm volatile( "NOP" ); + __asm volatile( "NOP" ); + __asm volatile( "NOP" ); + ulValue--; + } + } +} +/*-----------------------------------------------------------*/ + +void vFullDemoTickHook( void ) +{ + /* The full demo includes a software timer demo/test that requires + prodding periodically from the tick interrupt. */ + vTimerPeriodicISRTests(); + + /* Call the periodic queue overwrite from ISR demo. */ + vQueueOverwritePeriodicISRDemo(); + + /* Call the periodic event group from ISR demo. */ + vPeriodicEventGroupsProcessing(); + + /* Call the ISR component of the interrupt semaphore test. */ + vInterruptSemaphorePeriodicTest(); + + /* Call the code that 'gives' a task notification from an ISR. */ + xNotifyTaskFromISR(); +} + + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/reg_test.S b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/reg_test.S new file mode 100644 index 000000000..3393005af --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/Full_Demo/reg_test.S @@ -0,0 +1,462 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + + FEATURES AND PORTS ARE ADDED TO FREERTOS ALL THE TIME. PLEASE VISIT + http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + *************************************************************************** + * * + * FreeRTOS tutorial books are available in pdf and paperback. * + * Complete, revised, and edited pdf reference manuals are also * + * available. * + * * + * Purchasing FreeRTOS documentation will not only help you, by * + * ensuring you get running as quickly as possible and with an * + * in-depth knowledge of how to use FreeRTOS, it will also help * + * the FreeRTOS project to continue with its mission of providing * + * professional grade, cross platform, de facto standard solutions * + * for microcontrollers - completely free of charge! * + * * + * >>> See http://www.FreeRTOS.org/Documentation for details. <<< * + * * + * Thank you for using FreeRTOS, and thank you for your support! * + * * + *************************************************************************** + + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation AND MODIFIED BY the FreeRTOS exception. + + >>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to + distribute a combined work that includes FreeRTOS without being obliged to + provide the source code for proprietary components outside of the FreeRTOS + kernel. + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. See the GNU General Public License for more + details. You should have received a copy of the GNU General Public License + and the FreeRTOS license exception along with FreeRTOS; if not itcan be + viewed here: http://www.freertos.org/a00114.html and also obtained by + writing to Real Time Engineers Ltd., contact details for whom are available + on the FreeRTOS WEB site. + + 1 tab == 4 spaces! + + *************************************************************************** + * * + * Having a problem? Start by reading the FAQ "My application does * + * not run, what could be wrong?" * + * * + * http://www.FreeRTOS.org/FAQHelp.html * + * * + *************************************************************************** + + + http://www.FreeRTOS.org - Documentation, books, training, latest versions, + license and Real Time Engineers Ltd. contact details. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, and our new + fully thread aware and reentrant UDP/IP stack. + + http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High + Integrity Systems, who sell the code with commercial support, + indemnification and middleware, under the OpenRTOS brand. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. +*/ + + .global vRegTest1Implementation + .global vRegTest2Implementation + .extern ulRegTest1LoopCounter + .extern ulRegTest2LoopCounter + + .text + .arm + + /* This function is explained in the comments at the top of main-full.c. */ +.type vRegTest1Implementation, %function +vRegTest1Implementation: + + /* Fill each general purpose register with a known value. */ + mov r0, #0xFF + mov r1, #0x11 + mov r2, #0x22 + mov r3, #0x33 + mov r4, #0x44 + mov r5, #0x55 + mov r6, #0x66 + mov r7, #0x77 + mov r8, #0x88 + mov r9, #0x99 + mov r10, #0xAA + mov r11, #0xBB + mov r12, #0xCC + mov r14, #0xEE + + /* Fill each FPU register with a known value. */ + vmov d0, r0, r1 + vmov d1, r2, r3 + vmov d2, r4, r5 + vmov d3, r6, r7 + vmov d4, r8, r9 + vmov d5, r10, r11 + vmov d6, r0, r1 + vmov d7, r2, r3 + vmov d8, r4, r5 + vmov d9, r6, r7 + vmov d10, r8, r9 + vmov d11, r10, r11 + vmov d12, r0, r1 + vmov d13, r2, r3 + vmov d14, r4, r5 + vmov d15, r6, r7 + + /* Loop, checking each iteration that each register still contains the + expected value. */ +reg1_loop: + /* Yield to increase test coverage */ + svc 0 + + /* Check all the VFP registers still contain the values set above. + First save registers that are clobbered by the test. */ + push { r0-r1 } + + vmov r0, r1, d0 + cmp r0, #0xFF + bne reg1_error_loopf + cmp r1, #0x11 + bne reg1_error_loopf + vmov r0, r1, d1 + cmp r0, #0x22 + bne reg1_error_loopf + cmp r1, #0x33 + bne reg1_error_loopf + vmov r0, r1, d2 + cmp r0, #0x44 + bne reg1_error_loopf + cmp r1, #0x55 + bne reg1_error_loopf + vmov r0, r1, d3 + cmp r0, #0x66 + bne reg1_error_loopf + cmp r1, #0x77 + bne reg1_error_loopf + vmov r0, r1, d4 + cmp r0, #0x88 + bne reg1_error_loopf + cmp r1, #0x99 + bne reg1_error_loopf + vmov r0, r1, d5 + cmp r0, #0xAA + bne reg1_error_loopf + cmp r1, #0xBB + bne reg1_error_loopf + vmov r0, r1, d6 + cmp r0, #0xFF + bne reg1_error_loopf + cmp r1, #0x11 + bne reg1_error_loopf + vmov r0, r1, d7 + cmp r0, #0x22 + bne reg1_error_loopf + cmp r1, #0x33 + bne reg1_error_loopf + vmov r0, r1, d8 + cmp r0, #0x44 + bne reg1_error_loopf + cmp r1, #0x55 + bne reg1_error_loopf + vmov r0, r1, d9 + cmp r0, #0x66 + bne reg1_error_loopf + cmp r1, #0x77 + bne reg1_error_loopf + vmov r0, r1, d10 + cmp r0, #0x88 + bne reg1_error_loopf + cmp r1, #0x99 + bne reg1_error_loopf + vmov r0, r1, d11 + cmp r0, #0xAA + bne reg1_error_loopf + cmp r1, #0xBB + bne reg1_error_loopf + vmov r0, r1, d12 + cmp r0, #0xFF + bne reg1_error_loopf + cmp r1, #0x11 + bne reg1_error_loopf + vmov r0, r1, d13 + cmp r0, #0x22 + bne reg1_error_loopf + cmp r1, #0x33 + bne reg1_error_loopf + vmov r0, r1, d14 + cmp r0, #0x44 + bne reg1_error_loopf + cmp r1, #0x55 + bne reg1_error_loopf + vmov r0, r1, d15 + cmp r0, #0x66 + bne reg1_error_loopf + cmp r1, #0x77 + bne reg1_error_loopf + + /* Restore the registers that were clobbered by the test. */ + pop {r0-r1} + + /* VFP register test passed. Jump to the core register test. */ + b reg1_loopf_pass + +reg1_error_loopf: + /* If this line is hit then a VFP register value was found to be + incorrect. */ + b reg1_error_loopf + +reg1_loopf_pass: + + /* Test each general purpose register to check that it still contains the + expected known value, jumping to reg1_error_loop if any register contains + an unexpected value. */ + cmp r0, #0xFF + bne reg1_error_loop + cmp r1, #0x11 + bne reg1_error_loop + cmp r2, #0x22 + bne reg1_error_loop + cmp r3, #0x33 + bne reg1_error_loop + cmp r4, #0x44 + bne reg1_error_loop + cmp r5, #0x55 + bne reg1_error_loop + cmp r6, #0x66 + bne reg1_error_loop + cmp r7, #0x77 + bne reg1_error_loop + cmp r8, #0x88 + bne reg1_error_loop + cmp r9, #0x99 + bne reg1_error_loop + cmp r10, #0xAA + bne reg1_error_loop + cmp r11, #0xBB + bne reg1_error_loop + cmp r12, #0xCC + bne reg1_error_loop + cmp r14, #0xEE + bne reg1_error_loop + + /* Everything passed, increment the loop counter. */ + push { r0-r1 } + ldr r0, =ulRegTest1LoopCounter + ldr r1, [r0] + adds r1, r1, #1 + str r1, [r0] + pop { r0-r1 } + + /* Start again. */ + b reg1_loop + +reg1_error_loop: + /* If this line is hit then there was an error in a core register value. + The loop ensures the loop counter stops incrementing. */ + b reg1_error_loop + nop + +/*-----------------------------------------------------------*/ + +.type vRegTest2Implementation, %function +vRegTest2Implementation: + + /* Put a known value in each register. */ + mov r0, #0xFF000000 + mov r1, #0x11000000 + mov r2, #0x22000000 + mov r3, #0x33000000 + mov r4, #0x44000000 + mov r5, #0x55000000 + mov r6, #0x66000000 + mov r7, #0x77000000 + mov r8, #0x88000000 + mov r9, #0x99000000 + mov r10, #0xAA000000 + mov r11, #0xBB000000 + mov r12, #0xCC000000 + mov r14, #0xEE000000 + + /* Likewise the floating point registers */ + vmov d0, r0, r1 + vmov d1, r2, r3 + vmov d2, r4, r5 + vmov d3, r6, r7 + vmov d4, r8, r9 + vmov d5, r10, r11 + vmov d6, r0, r1 + vmov d7, r2, r3 + vmov d8, r4, r5 + vmov d9, r6, r7 + vmov d10, r8, r9 + vmov d11, r10, r11 + vmov d12, r0, r1 + vmov d13, r2, r3 + vmov d14, r4, r5 + vmov d15, r6, r7 + + /* Loop, checking each iteration that each register still contains the + expected value. */ +reg2_loop: + /* Check all the VFP registers still contain the values set above. + First save registers that are clobbered by the test. */ + push { r0-r1 } + + vmov r0, r1, d0 + cmp r0, #0xFF000000 + bne reg2_error_loopf + cmp r1, #0x11000000 + bne reg2_error_loopf + vmov r0, r1, d1 + cmp r0, #0x22000000 + bne reg2_error_loopf + cmp r1, #0x33000000 + bne reg2_error_loopf + vmov r0, r1, d2 + cmp r0, #0x44000000 + bne reg2_error_loopf + cmp r1, #0x55000000 + bne reg2_error_loopf + vmov r0, r1, d3 + cmp r0, #0x66000000 + bne reg2_error_loopf + cmp r1, #0x77000000 + bne reg2_error_loopf + vmov r0, r1, d4 + cmp r0, #0x88000000 + bne reg2_error_loopf + cmp r1, #0x99000000 + bne reg2_error_loopf + vmov r0, r1, d5 + cmp r0, #0xAA000000 + bne reg2_error_loopf + cmp r1, #0xBB000000 + bne reg2_error_loopf + vmov r0, r1, d6 + cmp r0, #0xFF000000 + bne reg2_error_loopf + cmp r1, #0x11000000 + bne reg2_error_loopf + vmov r0, r1, d7 + cmp r0, #0x22000000 + bne reg2_error_loopf + cmp r1, #0x33000000 + bne reg2_error_loopf + vmov r0, r1, d8 + cmp r0, #0x44000000 + bne reg2_error_loopf + cmp r1, #0x55000000 + bne reg2_error_loopf + vmov r0, r1, d9 + cmp r0, #0x66000000 + bne reg2_error_loopf + cmp r1, #0x77000000 + bne reg2_error_loopf + vmov r0, r1, d10 + cmp r0, #0x88000000 + bne reg2_error_loopf + cmp r1, #0x99000000 + bne reg2_error_loopf + vmov r0, r1, d11 + cmp r0, #0xAA000000 + bne reg2_error_loopf + cmp r1, #0xBB000000 + bne reg2_error_loopf + vmov r0, r1, d12 + cmp r0, #0xFF000000 + bne reg2_error_loopf + cmp r1, #0x11000000 + bne reg2_error_loopf + vmov r0, r1, d13 + cmp r0, #0x22000000 + bne reg2_error_loopf + cmp r1, #0x33000000 + bne reg2_error_loopf + vmov r0, r1, d14 + cmp r0, #0x44000000 + bne reg2_error_loopf + cmp r1, #0x55000000 + bne reg2_error_loopf + vmov r0, r1, d15 + cmp r0, #0x66000000 + bne reg2_error_loopf + cmp r1, #0x77000000 + bne reg2_error_loopf + + /* Restore the registers that were clobbered by the test. */ + pop {r0-r1} + + /* VFP register test passed. Jump to the core register test. */ + b reg2_loopf_pass + +reg2_error_loopf: + /* If this line is hit then a VFP register value was found to be + incorrect. */ + b reg2_error_loopf + +reg2_loopf_pass: + + cmp r0, #0xFF000000 + bne reg2_error_loop + cmp r1, #0x11000000 + bne reg2_error_loop + cmp r2, #0x22000000 + bne reg2_error_loop + cmp r3, #0x33000000 + bne reg2_error_loop + cmp r4, #0x44000000 + bne reg2_error_loop + cmp r5, #0x55000000 + bne reg2_error_loop + cmp r6, #0x66000000 + bne reg2_error_loop + cmp r7, #0x77000000 + bne reg2_error_loop + cmp r8, #0x88000000 + bne reg2_error_loop + cmp r9, #0x99000000 + bne reg2_error_loop + cmp r10, #0xAA000000 + bne reg2_error_loop + cmp r11, #0xBB000000 + bne reg2_error_loop + cmp r12, #0xCC000000 + bne reg2_error_loop + cmp r14, #0xEE000000 + bne reg2_error_loop + + /* Everything passed, increment the loop counter. */ + push { r0-r1 } + ldr r0, =ulRegTest2LoopCounter + ldr r1, [r0] + adds r1, r1, #1 + str r1, [r0] + pop { r0-r1 } + + /* Start again. */ + b reg2_loop + +reg2_error_loop: + /* If this line is hit then there was an error in a core register value. + The loop ensures the loop counter stops incrementing. */ + b reg2_error_loop + nop + + + .end + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/lscript.ld b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/lscript.ld new file mode 100644 index 000000000..e1f1bcfea --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/lscript.ld @@ -0,0 +1,310 @@ +/*******************************************************************/ +/* */ +/* This file is automatically generated by linker script generator.*/ +/* */ +/* Version: */ +/* */ +/* Copyright (c) 2010 Xilinx, Inc. All rights reserved. */ +/* */ +/* Description : ARM-v7 Linker Script */ +/* */ +/*******************************************************************/ + +_STACK_SIZE = DEFINED(_STACK_SIZE) ? _STACK_SIZE : 0x2000; +_HEAP_SIZE = DEFINED(_HEAP_SIZE) ? _HEAP_SIZE : 0x2000; + +_ABORT_STACK_SIZE = DEFINED(_ABORT_STACK_SIZE) ? _ABORT_STACK_SIZE : 1024; +_SUPERVISOR_STACK_SIZE = DEFINED(_SUPERVISOR_STACK_SIZE) ? _SUPERVISOR_STACK_SIZE : 2048; +_IRQ_STACK_SIZE = DEFINED(_IRQ_STACK_SIZE) ? _IRQ_STACK_SIZE : 1024; +_FIQ_STACK_SIZE = DEFINED(_FIQ_STACK_SIZE) ? _FIQ_STACK_SIZE : 1024; +_UNDEF_STACK_SIZE = DEFINED(_UNDEF_STACK_SIZE) ? _UNDEF_STACK_SIZE : 1024; + +/* Define Memories in the system */ + +MEMORY +{ + psu_bbram_0_S_AXI_BASEADDR : ORIGIN = 0xFFCD0000, LENGTH = 0x10000 + psu_ocm_S_AXI_BASEADDR : ORIGIN = 0xFF960000, LENGTH = 0x10000 + psu_ocm_ram_0_S_AXI_BASEADDR : ORIGIN = 0xFFFC0000, LENGTH = 0x30000 + psu_ocm_ram_1_S_AXI_BASEADDR : ORIGIN = 0xFFFF0000, LENGTH = 0x10000 + psu_pmu_ram_S_AXI_BASEADDR : ORIGIN = 0xFFDC0000, LENGTH = 0x20000 + psu_qspi_linear_0_S_AXI_BASEADDR : ORIGIN = 0xC0000000, LENGTH = 0x20000000 + psu_r5_0_atcm_S_AXI_BASEADDR : ORIGIN = 0xFFE00000, LENGTH = 0x10000 + psu_r5_0_atcm_lockstep_S_AXI_BASEADDR : ORIGIN = 0xFFE10000, LENGTH = 0x10000 + psu_r5_0_btcm_S_AXI_BASEADDR : ORIGIN = 0xFFE20000, LENGTH = 0x10000 + psu_r5_0_btcm_lockstep_S_AXI_BASEADDR : ORIGIN = 0xFFE30000, LENGTH = 0x10000 + psu_r5_1_atcm_S_AXI_BASEADDR : ORIGIN = 0xFFE90000, LENGTH = 0x10000 + psu_r5_1_btcm_S_AXI_BASEADDR : ORIGIN = 0xFFEB0000, LENGTH = 0x10000 + psu_r5_ddr_0_S_AXI_BASEADDR : ORIGIN = 0x100000, LENGTH = 0x7FF00000 + psu_r5_tcm_ram_0_S_AXI_BASEADDR : ORIGIN = 0x100, LENGTH = 0x1FF01 +} + +/* Specify the default entry point to the program */ + +ENTRY(_boot) + +/* Define the sections, and where they are mapped in memory */ + +SECTIONS +{ +.vectors 0x0 : { + KEEP (*(.freertos_vectors)) + KEEP (*(.vectors)) +} + +.text : { + *(.boot) + *(.text) + *(.text.*) + *(.gnu.linkonce.t.*) + *(.plt) + *(.gnu_warning) + *(.gcc_execpt_table) + *(.glue_7) + *(.glue_7t) + *(.vfp11_veneer) + *(.ARM.extab) + *(.gnu.linkonce.armextab.*) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.init : { + KEEP (*(.init)) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.fini : { + KEEP (*(.fini)) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.interp : { + KEEP (*(.interp)) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.note-ABI-tag : { + KEEP (*(.note-ABI-tag)) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.rodata : { + __rodata_start = .; + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r.*) + __rodata_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.rodata1 : { + __rodata1_start = .; + *(.rodata1) + *(.rodata1.*) + __rodata1_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.sdata2 : { + __sdata2_start = .; + *(.sdata2) + *(.sdata2.*) + *(.gnu.linkonce.s2.*) + __sdata2_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.sbss2 : { + __sbss2_start = .; + *(.sbss2) + *(.sbss2.*) + *(.gnu.linkonce.sb2.*) + __sbss2_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.data : { + __data_start = .; + *(.data) + *(.data.*) + *(.gnu.linkonce.d.*) + *(.jcr) + *(.got) + *(.got.plt) + __data_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.data1 : { + __data1_start = .; + *(.data1) + *(.data1.*) + __data1_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.got : { + *(.got) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.ctors : { + __CTOR_LIST__ = .; + ___CTORS_LIST___ = .; + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE(*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END__ = .; + ___CTORS_END___ = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.dtors : { + __DTOR_LIST__ = .; + ___DTORS_LIST___ = .; + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE(*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END__ = .; + ___DTORS_END___ = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.fixup : { + __fixup_start = .; + *(.fixup) + __fixup_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.eh_frame : { + *(.eh_frame) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.eh_framehdr : { + __eh_framehdr_start = .; + *(.eh_framehdr) + __eh_framehdr_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.gcc_except_table : { + *(.gcc_except_table) +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.mmu_tbl (ALIGN(16384)) : { + __mmu_tbl_start = .; + *(.mmu_tbl) + __mmu_tbl_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.ARM.exidx : { + __exidx_start = .; + *(.ARM.exidx*) + *(.gnu.linkonce.armexidix.*.*) + __exidx_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.preinit_array : { + __preinit_array_start = .; + KEEP (*(SORT(.preinit_array.*))) + KEEP (*(.preinit_array)) + __preinit_array_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.init_array : { + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.fini_array : { + __fini_array_start = .; + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array)) + __fini_array_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.ARM.attributes : { + __ARM.attributes_start = .; + *(.ARM.attributes) + __ARM.attributes_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.sdata : { + __sdata_start = .; + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + __sdata_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.sbss (NOLOAD) : { + __sbss_start = .; + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + __sbss_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.tdata : { + __tdata_start = .; + *(.tdata) + *(.tdata.*) + *(.gnu.linkonce.td.*) + __tdata_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.tbss : { + __tbss_start = .; + *(.tbss) + *(.tbss.*) + *(.gnu.linkonce.tb.*) + __tbss_end = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.bss (NOLOAD) : { + . = ALIGN(4); + __bss_start__ = .; + *(.bss) + *(.bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +_SDA_BASE_ = __sdata_start + ((__sbss_end - __sdata_start) / 2 ); + +_SDA2_BASE_ = __sdata2_start + ((__sbss2_end - __sdata2_start) / 2 ); + +/* Generate Stack and Heap definitions */ + +.heap (NOLOAD) : { + . = ALIGN(16); + _heap = .; + HeapBase = .; + _heap_start = .; + . += _HEAP_SIZE; + _heap_end = .; + HeapLimit = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +.stack (NOLOAD) : { + . = ALIGN(16); + _stack_end = .; + . += _STACK_SIZE; + _stack = .; + __stack = _stack; + . = ALIGN(16); + _irq_stack_end = .; + . += _IRQ_STACK_SIZE; + __irq_stack = .; + _supervisor_stack_end = .; + . += _SUPERVISOR_STACK_SIZE; + . = ALIGN(16); + __supervisor_stack = .; + _abort_stack_end = .; + . += _ABORT_STACK_SIZE; + . = ALIGN(16); + __abort_stack = .; + _fiq_stack_end = .; + . += _FIQ_STACK_SIZE; + . = ALIGN(16); + __fiq_stack = .; + _undef_stack_end = .; + . += _UNDEF_STACK_SIZE; + . = ALIGN(16); + __undef_stack = .; +} > psu_r5_ddr_0_S_AXI_BASEADDR + +_end = .; +} + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/main.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/main.c new file mode 100644 index 000000000..5c6c602a5 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/main.c @@ -0,0 +1,314 @@ +/* + FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/****************************************************************************** + * NOTE 1: This project provides two demo applications. A simple blinky + * style project, and a more comprehensive test and demo application. The + * mainSELECTED_APPLICATION setting in main.c is used to select between the two. + * See the notes on using mainSELECTED_APPLICATION where it is defined below. + * + * NOTE 2: This file only contains the source code that is not specific to + * either the simply blinky or full demos - this includes initialisation code + * and callback functions. + */ + +/* Standard includes. */ +#include + +/* Scheduler include files. */ +#include "FreeRTOS.h" +#include "task.h" + +/* Xilinx includes. */ +#include "platform.h" +#include "xparameters.h" +#include "xscugic.h" +#include "xil_printf.h" + +/* mainSELECTED_APPLICATION is used to select between two demo applications, + * as described at the top of this file. + * + * When mainSELECTED_APPLICATION is set to 0 the simple blinky example will + * be run. + * + * When mainSELECTED_APPLICATION is set to 1 the comprehensive test and demo + * application will be run. + */ +#define mainSELECTED_APPLICATION 0 + +/*-----------------------------------------------------------*/ + +/* + * Configure the hardware as necessary to run this demo. + */ +static void prvSetupHardware( void ); + +/* + * See the comments at the top of this file and above the + * mainSELECTED_APPLICATION definition. + */ +#if ( mainSELECTED_APPLICATION == 0 ) + extern void main_blinky( void ); +#elif ( mainSELECTED_APPLICATION == 1 ) + extern void main_full( void ); +#else + #error Invalid mainSELECTED_APPLICATION setting. See the comments at the top of this file and above the mainSELECTED_APPLICATION definition. +#endif + +/* Prototypes for the standard FreeRTOS callback/hook functions implemented +within this file. */ +void vApplicationMallocFailedHook( void ); +void vApplicationIdleHook( void ); +void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName ); +void vApplicationTickHook( void ); + +/*-----------------------------------------------------------*/ + +/* The interrupt controller is initialised in this file, and made available to +other modules. */ +XScuGic xInterruptController; + +/*-----------------------------------------------------------*/ + +int main( void ) +{ + /* Configure the hardware ready to run the demo. */ + prvSetupHardware(); + + /* The mainSELECTED_APPLICATION setting is described at the top + of this file. */ + #if( mainSELECTED_APPLICATION == 0 ) + { + main_blinky(); + } + #elif( mainSELECTED_APPLICATION == 1 ) + { + main_full(); + } + #endif + + /* Don't expect to reach here. */ + return 0; +} +/*-----------------------------------------------------------*/ + +static void prvSetupHardware( void ) +{ +BaseType_t xStatus; +XScuGic_Config *pxGICConfig; + + /* Ensure no interrupts execute while the scheduler is in an inconsistent + state. Interrupts are automatically enabled when the scheduler is + started. */ + portDISABLE_INTERRUPTS(); + + init_platform(); + + /* Obtain the configuration of the GIC. */ + pxGICConfig = XScuGic_LookupConfig( XPAR_SCUGIC_SINGLE_DEVICE_ID ); + + /* Sanity check the FreeRTOSConfig.h settings are correct for the + hardware. */ + configASSERT( pxGICConfig ); + configASSERT( pxGICConfig->CpuBaseAddress == ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET ) ); + configASSERT( pxGICConfig->DistBaseAddress == configINTERRUPT_CONTROLLER_BASE_ADDRESS ); + + /* Install a default handler for each GIC interrupt. */ + xStatus = XScuGic_CfgInitialize( &xInterruptController, pxGICConfig, pxGICConfig->CpuBaseAddress ); + configASSERT( xStatus == XST_SUCCESS ); + ( void ) xStatus; /* Remove compiler warning if configASSERT() is not defined. */ + + /* Ensure the FPU is accessible by enabling access to CP 10 and 11. */ + __asm volatile( "MRC p15, 0, r0, c1, c0, 2 \n" \ + "ORR r0, r0, #(0xF << 20) \n" \ + "MCR p15, 0, r0, c1, c0, 2 \n" \ + "ISB " ); + + + /* Ensure the FPU is enabled. */ + __asm volatile( "VMRS r0, FPEXC \n" \ + "ORR r1, r0, #(1<<30) \n" \ + "VMSR FPEXC, r1 \n" \ + ::: "r0", "r1" ); +} +/*-----------------------------------------------------------*/ + +void vApplicationMallocFailedHook( void ) +{ + /* Called if a call to pvPortMalloc() fails because there is insufficient + free memory available in the FreeRTOS heap. pvPortMalloc() is called + internally by FreeRTOS API functions that create tasks, queues, software + timers, and semaphores. The size of the FreeRTOS heap is set by the + configTOTAL_HEAP_SIZE configuration constant in FreeRTOSConfig.h. */ + taskDISABLE_INTERRUPTS(); + for( ;; ); +} +/*-----------------------------------------------------------*/ + +void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName ) +{ + ( void ) pcTaskName; + ( void ) pxTask; + + /* Run time stack overflow checking is performed if + configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook + function is called if a stack overflow is detected. */ + taskDISABLE_INTERRUPTS(); + for( ;; ); +} +/*-----------------------------------------------------------*/ + +void vApplicationIdleHook( void ) +{ +volatile size_t xFreeHeapSpace; + + /* This is just a trivial example of an idle hook. It is called on each + cycle of the idle task. It must *NOT* attempt to block. In this case the + idle task just queries the amount of FreeRTOS heap that remains. See the + memory management section on the http://www.FreeRTOS.org web site for memory + management options. If there is a lot of heap memory free then the + configTOTAL_HEAP_SIZE value in FreeRTOSConfig.h can be reduced to free up + RAM. */ + xFreeHeapSpace = xPortGetFreeHeapSize(); + + /* Remove compiler warning about xFreeHeapSpace being set but never used. */ + ( void ) xFreeHeapSpace; +} +/*-----------------------------------------------------------*/ + +void vApplicationTickHook( void ) +{ + #if( mainSELECTED_APPLICATION == 1 ) + { + /* Only the comprehensive demo actually uses the tick hook. */ + extern void vFullDemoTickHook( void ); + vFullDemoTickHook(); + } + #endif +} +/*-----------------------------------------------------------*/ + +/* configUSE_STATIC_ALLOCATION is set to 1, so the application must provide an +implementation of vApplicationGetIdleTaskMemory() to provide the memory that is +used by the Idle task. */ +void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) +{ +/* If the buffers to be provided to the Idle task are declared inside this +function then they must be declared static - otherwise they will be allocated on +the stack and so not exists after this function exits. */ +static StaticTask_t xIdleTaskTCB; +static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle task's + state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} +/*-----------------------------------------------------------*/ + +/* configUSE_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the +application must provide an implementation of vApplicationGetTimerTaskMemory() +to provide the memory that is used by the Timer service task. */ +void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) +{ +/* If the buffers to be provided to the Timer task are declared inside this +function then they must be declared static - otherwise they will be allocated on +the stack and so not exists after this function exits. */ +static StaticTask_t xTimerTaskTCB; +static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Timer + task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; +} +/*-----------------------------------------------------------*/ + +void vMainAssertCalled( const char *pcFileName, uint32_t ulLineNumber ) +{ + xil_printf( "ASSERT! Line %lu of file %s\r\n", ulLineNumber, pcFileName ); + taskENTER_CRITICAL(); + for( ;; ); +} + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform.c new file mode 100644 index 000000000..315dcb0ce --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform.c @@ -0,0 +1,105 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ + +#include "xparameters.h" +#include "xil_cache.h" + +#include "platform_config.h" + +/* + * Uncomment one of the following two lines, depending on the target, + * if ps7/psu init source files are added in the source directory for + * compiling example outside of SDK. + */ +/*#include "ps7_init.h"*/ +/*#include "psu_init.h"*/ + +#ifdef STDOUT_IS_16550 + #include "xuartns550_l.h" + + #define UART_BAUD 9600 +#endif + +void +enable_caches() +{ +#ifdef __PPC__ + Xil_ICacheEnableRegion(CACHEABLE_REGION_MASK); + Xil_DCacheEnableRegion(CACHEABLE_REGION_MASK); +#elif __MICROBLAZE__ +#ifdef XPAR_MICROBLAZE_USE_ICACHE + Xil_ICacheEnable(); +#endif +#ifdef XPAR_MICROBLAZE_USE_DCACHE + Xil_DCacheEnable(); +#endif +#endif +} + +void +disable_caches() +{ + Xil_DCacheDisable(); + Xil_ICacheDisable(); +} + +void +init_uart() +{ +#ifdef STDOUT_IS_16550 + XUartNs550_SetBaud(STDOUT_BASEADDR, XPAR_XUARTNS550_CLOCK_HZ, UART_BAUD); + XUartNs550_SetLineControlReg(STDOUT_BASEADDR, XUN_LCR_8_DATA_BITS); +#endif + /* Bootrom/BSP configures PS7/PSU UART to 115200 bps */ +} + +void +init_platform() +{ + /* + * If you want to run this example outside of SDK, + * uncomment one of the following two lines and also #include "ps7_init.h" + * or #include "ps7_init.h" at the top, depending on the target. + * Make sure that the ps7/psu_init.c and ps7/psu_init.h files are included + * along with this example source files for compilation. + */ + /* ps7_init();*/ + /* psu_init();*/ + enable_caches(); + init_uart(); +} + +void +cleanup_platform() +{ + disable_caches(); +} diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform.h new file mode 100644 index 000000000..e273e3718 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform.h @@ -0,0 +1,41 @@ +/****************************************************************************** +* +* Copyright (C) 2008 - 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ + +#ifndef __PLATFORM_H_ +#define __PLATFORM_H_ + +#include "platform_config.h" + +void init_platform(); +void cleanup_platform(); + +#endif diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform_config.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform_config.h new file mode 100644 index 000000000..fea03914b --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5/src/platform_config.h @@ -0,0 +1,6 @@ +#ifndef __PLATFORM_CONFIG_H_ +#define __PLATFORM_CONFIG_H_ + +#define STDOUT_IS_PSU_UART +#define UART_DEVICE_ID 0 +#endif diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.cproject b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.cproject new file mode 100644 index 000000000..25054143d --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.cproject @@ -0,0 +1,13 @@ + + + + + + + + + + + + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.project b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.project new file mode 100644 index 000000000..be846c648 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.project @@ -0,0 +1,75 @@ + + + RTOSDemo_R5_bsp + Created by SDK v2016.1 + + + + + org.eclipse.cdt.make.core.makeBuilder + + + org.eclipse.cdt.core.errorOutputParser + org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GCCErrorParser;org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.VCErrorParser;org.eclipse.cdt.core.CWDLocator;org.eclipse.cdt.core.MakeErrorParser; + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.build.arguments + + + + org.eclipse.cdt.make.core.build.command + make + + + org.eclipse.cdt.make.core.build.target.auto + all + + + org.eclipse.cdt.make.core.build.target.clean + clean + + + org.eclipse.cdt.make.core.build.target.inc + all + + + org.eclipse.cdt.make.core.enableAutoBuild + true + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.enabledIncrementalBuild + true + + + org.eclipse.cdt.make.core.environment + + + + org.eclipse.cdt.make.core.stopOnError + false + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + + com.xilinx.sdk.sw.SwProjectNature + org.eclipse.cdt.core.cnature + org.eclipse.cdt.make.core.makeNature + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.sdkproject b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.sdkproject new file mode 100644 index 000000000..49c8e0954 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.sdkproject @@ -0,0 +1,4 @@ +THIRPARTY=false +HW_PROJECT_REFERENCE=ZynqMP_ZCU102_hw_platform +PROCESSOR=psu_cortexr5_0 +MSS_FILE=system.mss diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/Makefile new file mode 100644 index 000000000..91c3fcf13 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/Makefile @@ -0,0 +1,31 @@ +# Makefile generated by Xilinx. + +PROCESSOR = psu_cortexr5_0 +LIBRARIES = ${PROCESSOR}/lib/libxil.a +BSP_MAKEFILES := $(wildcard $(PROCESSOR)/libsrc/*/src/Makefile) +SUBDIRS := $(patsubst %/Makefile, %, $(BSP_MAKEFILES)) + +ifneq (,$(findstring win,$(RDI_PLATFORM))) + SHELL = CMD +endif + +all: libs + @echo 'Finished building libraries' + +include: $(addsuffix /make.include,$(SUBDIRS)) + +libs: $(addsuffix /make.libs,$(SUBDIRS)) + +$(PROCESSOR)/lib/libxil.a: $(PROCESSOR)/lib/libxil_init.a + cp -f $< $@ + +%/make.include: $(if $(wildcard $(PROCESSOR)/lib/libxil_init.a),$(PROCESSOR)/lib/libxil.a,) + @echo "Running Make include in $(subst /make.include,,$@)" + $(MAKE) -C $(subst /make.include,,$@) -s include "SHELL=$(SHELL)" "COMPILER=armr5-none-eabi-gcc" "ARCHIVER=armr5-none-eabi-ar" "COMPILER_FLAGS= -O2 -c -mcpu=cortex-r5" "EXTRA_COMPILER_FLAGS=-g -DARMR5 -mfpu=vfpv3-d16" + +%/make.libs: include + @echo "Running Make libs in $(subst /make.libs,,$@)" + $(MAKE) -C $(subst /make.libs,,$@) -s libs "SHELL=$(SHELL)" "COMPILER=armr5-none-eabi-gcc" "ARCHIVER=armr5-none-eabi-ar" "COMPILER_FLAGS= -O2 -c -mcpu=cortex-r5" "EXTRA_COMPILER_FLAGS=-g -DARMR5 -mfpu=vfpv3-d16" + +clean: + rm -f ${PROCESSOR}/lib/libxil.a diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/include/xparameters.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/include/xparameters.h new file mode 100644 index 000000000..7e9e79ff2 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/include/xparameters.h @@ -0,0 +1,1346 @@ +/* Definition for CPU ID */ +#define XPAR_CPU_ID 0 + +/* Definitions for peripheral PSU_CORTEXR5_0 */ +#define XPAR_PSU_CORTEXR5_0_CPU_CLK_FREQ_HZ 499994995 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_CORTEXR5_0 */ +#define XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ 499994995 + + +/******************************************************************/ + +#include "xparameters_ps.h" + +/******************************************************************/ + +/* + * Definitions of PSU_TTC_3 counter 0 base address and frequency used + * by sleep and usleep APIs + */ + +#define SLEEP_TIMER_BASEADDR 0xFF140000 +#define SLEEP_TIMER_FREQUENCY 100000000 + +/******************************************************************/ + +#define STDIN_BASEADDRESS 0xFF000000 +#define STDOUT_BASEADDRESS 0xFF000000 + +/******************************************************************/ + +/* Definitions for driver AXIPMON */ +#define XPAR_XAXIPMON_NUM_INSTANCES 4 + +/* Definitions for peripheral PSU_APM_0 */ +#define XPAR_PSU_APM_0_DEVICE_ID 0 +#define XPAR_PSU_APM_0_BASEADDR 0xFD0B0000 +#define XPAR_PSU_APM_0_HIGHADDR 0xFD0BFFFF +#define XPAR_PSU_APM_0_GLOBAL_COUNT_WIDTH 32 +#define XPAR_PSU_APM_0_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_PSU_APM_0_ENABLE_EVENT_COUNT 1 +#define XPAR_PSU_APM_0_NUM_MONITOR_SLOTS 6 +#define XPAR_PSU_APM_0_NUM_OF_COUNTERS 10 +#define XPAR_PSU_APM_0_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_PSU_APM_0_ENABLE_EVENT_LOG 0 +#define XPAR_PSU_APM_0_FIFO_AXIS_DEPTH 32 +#define XPAR_PSU_APM_0_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_PSU_APM_0_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_PSU_APM_0_METRIC_COUNT_SCALE 1 +#define XPAR_PSU_APM_0_ENABLE_ADVANCED 1 +#define XPAR_PSU_APM_0_ENABLE_PROFILE 0 +#define XPAR_PSU_APM_0_ENABLE_TRACE 0 +#define XPAR_PSU_APM_0_S_AXI4_BASEADDR 0x00000000 +#define XPAR_PSU_APM_0_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_PSU_APM_0_ENABLE_32BIT_FILTER_ID 1 + + +/* Definitions for peripheral PSU_APM_1 */ +#define XPAR_PSU_APM_1_DEVICE_ID 1 +#define XPAR_PSU_APM_1_BASEADDR 0xFFA00000 +#define XPAR_PSU_APM_1_HIGHADDR 0xFFA0FFFF +#define XPAR_PSU_APM_1_GLOBAL_COUNT_WIDTH 32 +#define XPAR_PSU_APM_1_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_PSU_APM_1_ENABLE_EVENT_COUNT 1 +#define XPAR_PSU_APM_1_NUM_MONITOR_SLOTS 1 +#define XPAR_PSU_APM_1_NUM_OF_COUNTERS 3 +#define XPAR_PSU_APM_1_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_PSU_APM_1_ENABLE_EVENT_LOG 0 +#define XPAR_PSU_APM_1_FIFO_AXIS_DEPTH 32 +#define XPAR_PSU_APM_1_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_PSU_APM_1_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_PSU_APM_1_METRIC_COUNT_SCALE 1 +#define XPAR_PSU_APM_1_ENABLE_ADVANCED 1 +#define XPAR_PSU_APM_1_ENABLE_PROFILE 0 +#define XPAR_PSU_APM_1_ENABLE_TRACE 0 +#define XPAR_PSU_APM_1_S_AXI4_BASEADDR 0x00000000 +#define XPAR_PSU_APM_1_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_PSU_APM_1_ENABLE_32BIT_FILTER_ID 1 + + +/* Definitions for peripheral PSU_APM_2 */ +#define XPAR_PSU_APM_2_DEVICE_ID 2 +#define XPAR_PSU_APM_2_BASEADDR 0xFFA10000 +#define XPAR_PSU_APM_2_HIGHADDR 0xFFA1FFFF +#define XPAR_PSU_APM_2_GLOBAL_COUNT_WIDTH 32 +#define XPAR_PSU_APM_2_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_PSU_APM_2_ENABLE_EVENT_COUNT 1 +#define XPAR_PSU_APM_2_NUM_MONITOR_SLOTS 1 +#define XPAR_PSU_APM_2_NUM_OF_COUNTERS 3 +#define XPAR_PSU_APM_2_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_PSU_APM_2_ENABLE_EVENT_LOG 0 +#define XPAR_PSU_APM_2_FIFO_AXIS_DEPTH 32 +#define XPAR_PSU_APM_2_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_PSU_APM_2_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_PSU_APM_2_METRIC_COUNT_SCALE 1 +#define XPAR_PSU_APM_2_ENABLE_ADVANCED 1 +#define XPAR_PSU_APM_2_ENABLE_PROFILE 0 +#define XPAR_PSU_APM_2_ENABLE_TRACE 0 +#define XPAR_PSU_APM_2_S_AXI4_BASEADDR 0x00000000 +#define XPAR_PSU_APM_2_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_PSU_APM_2_ENABLE_32BIT_FILTER_ID 1 + + +/* Definitions for peripheral PSU_APM_5 */ +#define XPAR_PSU_APM_5_DEVICE_ID 3 +#define XPAR_PSU_APM_5_BASEADDR 0xFD490000 +#define XPAR_PSU_APM_5_HIGHADDR 0xFD49FFFF +#define XPAR_PSU_APM_5_GLOBAL_COUNT_WIDTH 32 +#define XPAR_PSU_APM_5_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_PSU_APM_5_ENABLE_EVENT_COUNT 1 +#define XPAR_PSU_APM_5_NUM_MONITOR_SLOTS 1 +#define XPAR_PSU_APM_5_NUM_OF_COUNTERS 3 +#define XPAR_PSU_APM_5_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_PSU_APM_5_ENABLE_EVENT_LOG 0 +#define XPAR_PSU_APM_5_FIFO_AXIS_DEPTH 32 +#define XPAR_PSU_APM_5_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_PSU_APM_5_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_PSU_APM_5_METRIC_COUNT_SCALE 1 +#define XPAR_PSU_APM_5_ENABLE_ADVANCED 1 +#define XPAR_PSU_APM_5_ENABLE_PROFILE 0 +#define XPAR_PSU_APM_5_ENABLE_TRACE 0 +#define XPAR_PSU_APM_5_S_AXI4_BASEADDR 0x00000000 +#define XPAR_PSU_APM_5_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_PSU_APM_5_ENABLE_32BIT_FILTER_ID 1 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_APM_0 */ +#define XPAR_AXIPMON_0_DEVICE_ID XPAR_PSU_APM_0_DEVICE_ID +#define XPAR_AXIPMON_0_BASEADDR 0xFD0B0000 +#define XPAR_AXIPMON_0_HIGHADDR 0xFD0BFFFF +#define XPAR_AXIPMON_0_GLOBAL_COUNT_WIDTH 32 +#define XPAR_AXIPMON_0_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_AXIPMON_0_ENABLE_EVENT_COUNT 1 +#define XPAR_AXIPMON_0_NUM_MONITOR_SLOTS 6 +#define XPAR_AXIPMON_0_NUM_OF_COUNTERS 10 +#define XPAR_AXIPMON_0_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_AXIPMON_0_ENABLE_EVENT_LOG 0 +#define XPAR_AXIPMON_0_FIFO_AXIS_DEPTH 32 +#define XPAR_AXIPMON_0_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_AXIPMON_0_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_AXIPMON_0_METRIC_COUNT_SCALE 1 +#define XPAR_AXIPMON_0_ENABLE_ADVANCED 1 +#define XPAR_AXIPMON_0_ENABLE_PROFILE 0 +#define XPAR_AXIPMON_0_ENABLE_TRACE 0 +#define XPAR_AXIPMON_0_S_AXI4_BASEADDR 0x00000000 +#define XPAR_AXIPMON_0_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_AXIPMON_0_ENABLE_32BIT_FILTER_ID 1 + +/* Canonical definitions for peripheral PSU_APM_1 */ +#define XPAR_AXIPMON_1_DEVICE_ID XPAR_PSU_APM_1_DEVICE_ID +#define XPAR_AXIPMON_1_BASEADDR 0xFFA00000 +#define XPAR_AXIPMON_1_HIGHADDR 0xFFA0FFFF +#define XPAR_AXIPMON_1_GLOBAL_COUNT_WIDTH 32 +#define XPAR_AXIPMON_1_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_AXIPMON_1_ENABLE_EVENT_COUNT 1 +#define XPAR_AXIPMON_1_NUM_MONITOR_SLOTS 1 +#define XPAR_AXIPMON_1_NUM_OF_COUNTERS 3 +#define XPAR_AXIPMON_1_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_AXIPMON_1_ENABLE_EVENT_LOG 0 +#define XPAR_AXIPMON_1_FIFO_AXIS_DEPTH 32 +#define XPAR_AXIPMON_1_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_AXIPMON_1_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_AXIPMON_1_METRIC_COUNT_SCALE 1 +#define XPAR_AXIPMON_1_ENABLE_ADVANCED 1 +#define XPAR_AXIPMON_1_ENABLE_PROFILE 0 +#define XPAR_AXIPMON_1_ENABLE_TRACE 0 +#define XPAR_AXIPMON_1_S_AXI4_BASEADDR 0x00000000 +#define XPAR_AXIPMON_1_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_AXIPMON_1_ENABLE_32BIT_FILTER_ID 1 + +/* Canonical definitions for peripheral PSU_APM_2 */ +#define XPAR_AXIPMON_2_DEVICE_ID XPAR_PSU_APM_2_DEVICE_ID +#define XPAR_AXIPMON_2_BASEADDR 0xFFA10000 +#define XPAR_AXIPMON_2_HIGHADDR 0xFFA1FFFF +#define XPAR_AXIPMON_2_GLOBAL_COUNT_WIDTH 32 +#define XPAR_AXIPMON_2_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_AXIPMON_2_ENABLE_EVENT_COUNT 1 +#define XPAR_AXIPMON_2_NUM_MONITOR_SLOTS 1 +#define XPAR_AXIPMON_2_NUM_OF_COUNTERS 3 +#define XPAR_AXIPMON_2_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_AXIPMON_2_ENABLE_EVENT_LOG 0 +#define XPAR_AXIPMON_2_FIFO_AXIS_DEPTH 32 +#define XPAR_AXIPMON_2_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_AXIPMON_2_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_AXIPMON_2_METRIC_COUNT_SCALE 1 +#define XPAR_AXIPMON_2_ENABLE_ADVANCED 1 +#define XPAR_AXIPMON_2_ENABLE_PROFILE 0 +#define XPAR_AXIPMON_2_ENABLE_TRACE 0 +#define XPAR_AXIPMON_2_S_AXI4_BASEADDR 0x00000000 +#define XPAR_AXIPMON_2_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_AXIPMON_2_ENABLE_32BIT_FILTER_ID 1 + +/* Canonical definitions for peripheral PSU_APM_5 */ +#define XPAR_AXIPMON_3_DEVICE_ID XPAR_PSU_APM_5_DEVICE_ID +#define XPAR_AXIPMON_3_BASEADDR 0xFD490000 +#define XPAR_AXIPMON_3_HIGHADDR 0xFD49FFFF +#define XPAR_AXIPMON_3_GLOBAL_COUNT_WIDTH 32 +#define XPAR_AXIPMON_3_METRICS_SAMPLE_COUNT_WIDTH 32 +#define XPAR_AXIPMON_3_ENABLE_EVENT_COUNT 1 +#define XPAR_AXIPMON_3_NUM_MONITOR_SLOTS 1 +#define XPAR_AXIPMON_3_NUM_OF_COUNTERS 3 +#define XPAR_AXIPMON_3_HAVE_SAMPLED_METRIC_CNT 1 +#define XPAR_AXIPMON_3_ENABLE_EVENT_LOG 0 +#define XPAR_AXIPMON_3_FIFO_AXIS_DEPTH 32 +#define XPAR_AXIPMON_3_FIFO_AXIS_TDATA_WIDTH 56 +#define XPAR_AXIPMON_3_FIFO_AXIS_TID_WIDTH 1 +#define XPAR_AXIPMON_3_METRIC_COUNT_SCALE 1 +#define XPAR_AXIPMON_3_ENABLE_ADVANCED 1 +#define XPAR_AXIPMON_3_ENABLE_PROFILE 0 +#define XPAR_AXIPMON_3_ENABLE_TRACE 0 +#define XPAR_AXIPMON_3_S_AXI4_BASEADDR 0x00000000 +#define XPAR_AXIPMON_3_S_AXI4_HIGHADDR 0x00000000 +#define XPAR_AXIPMON_3_ENABLE_32BIT_FILTER_ID 1 + + +/******************************************************************/ + +/* Definitions for driver CANPS */ +#define XPAR_XCANPS_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_CAN_1 */ +#define XPAR_PSU_CAN_1_DEVICE_ID 0 +#define XPAR_PSU_CAN_1_BASEADDR 0xFF070000 +#define XPAR_PSU_CAN_1_HIGHADDR 0xFF07FFFF +#define XPAR_PSU_CAN_1_CAN_CLK_FREQ_HZ 99998999 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_CAN_1 */ +#define XPAR_XCANPS_0_DEVICE_ID XPAR_PSU_CAN_1_DEVICE_ID +#define XPAR_XCANPS_0_BASEADDR 0xFF070000 +#define XPAR_XCANPS_0_HIGHADDR 0xFF07FFFF +#define XPAR_XCANPS_0_CAN_CLK_FREQ_HZ 99998999 + + +/******************************************************************/ + +/* Definitions for driver CSUDMA */ +#define XPAR_XCSUDMA_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_CSUDMA */ +#define XPAR_PSU_CSUDMA_DEVICE_ID 0 +#define XPAR_PSU_CSUDMA_BASEADDR 0xFFC80000 +#define XPAR_PSU_CSUDMA_HIGHADDR 0xFFC9FFFF +#define XPAR_PSU_CSUDMA_CSUDMA_CLK_FREQ_HZ 0 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_CSUDMA */ +#define XPAR_XCSUDMA_0_DEVICE_ID XPAR_PSU_CSUDMA_DEVICE_ID +#define XPAR_XCSUDMA_0_BASEADDR 0xFFC80000 +#define XPAR_XCSUDMA_0_HIGHADDR 0xFFC9FFFF +#define XPAR_XCSUDMA_0_CSUDMA_CLK_FREQ_HZ 0 + + +/******************************************************************/ + +/* Definitions for driver EMACPS */ +#define XPAR_XEMACPS_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_ETHERNET_3 */ +#define XPAR_PSU_ETHERNET_3_DEVICE_ID 0 +#define XPAR_PSU_ETHERNET_3_BASEADDR 0xFF0E0000 +#define XPAR_PSU_ETHERNET_3_HIGHADDR 0xFF0EFFFF +#define XPAR_PSU_ETHERNET_3_ENET_CLK_FREQ_HZ 124998749 +#define XPAR_PSU_ETHERNET_3_ENET_SLCR_1000MBPS_DIV0 50000000 +#define XPAR_PSU_ETHERNET_3_ENET_SLCR_1000MBPS_DIV1 50000000 +#define XPAR_PSU_ETHERNET_3_ENET_SLCR_100MBPS_DIV0 50000000 +#define XPAR_PSU_ETHERNET_3_ENET_SLCR_100MBPS_DIV1 50000000 +#define XPAR_PSU_ETHERNET_3_ENET_SLCR_10MBPS_DIV0 50000000 +#define XPAR_PSU_ETHERNET_3_ENET_SLCR_10MBPS_DIV1 50000000 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_ETHERNET_3 */ +#define XPAR_XEMACPS_0_DEVICE_ID XPAR_PSU_ETHERNET_3_DEVICE_ID +#define XPAR_XEMACPS_0_BASEADDR 0xFF0E0000 +#define XPAR_XEMACPS_0_HIGHADDR 0xFF0EFFFF +#define XPAR_XEMACPS_0_ENET_CLK_FREQ_HZ 124998749 +#define XPAR_XEMACPS_0_ENET_SLCR_1000Mbps_DIV0 50000000 +#define XPAR_XEMACPS_0_ENET_SLCR_1000Mbps_DIV1 50000000 +#define XPAR_XEMACPS_0_ENET_SLCR_100Mbps_DIV0 50000000 +#define XPAR_XEMACPS_0_ENET_SLCR_100Mbps_DIV1 50000000 +#define XPAR_XEMACPS_0_ENET_SLCR_10Mbps_DIV0 50000000 +#define XPAR_XEMACPS_0_ENET_SLCR_10Mbps_DIV1 50000000 + + +/******************************************************************/ + + +/* Definitions for peripheral PSU_AFI_0 */ +#define XPAR_PSU_AFI_0_S_AXI_BASEADDR 0xFD360000 +#define XPAR_PSU_AFI_0_S_AXI_HIGHADDR 0xFD36FFFF + + +/* Definitions for peripheral PSU_AFI_1 */ +#define XPAR_PSU_AFI_1_S_AXI_BASEADDR 0xFD370000 +#define XPAR_PSU_AFI_1_S_AXI_HIGHADDR 0xFD37FFFF + + +/* Definitions for peripheral PSU_AFI_2 */ +#define XPAR_PSU_AFI_2_S_AXI_BASEADDR 0xFD380000 +#define XPAR_PSU_AFI_2_S_AXI_HIGHADDR 0xFD38FFFF + + +/* Definitions for peripheral PSU_AFI_3 */ +#define XPAR_PSU_AFI_3_S_AXI_BASEADDR 0xFD390000 +#define XPAR_PSU_AFI_3_S_AXI_HIGHADDR 0xFD39FFFF + + +/* Definitions for peripheral PSU_AFI_4 */ +#define XPAR_PSU_AFI_4_S_AXI_BASEADDR 0xFD3A0000 +#define XPAR_PSU_AFI_4_S_AXI_HIGHADDR 0xFD3AFFFF + + +/* Definitions for peripheral PSU_AFI_5 */ +#define XPAR_PSU_AFI_5_S_AXI_BASEADDR 0xFD3B0000 +#define XPAR_PSU_AFI_5_S_AXI_HIGHADDR 0xFD3BFFFF + + +/* Definitions for peripheral PSU_AFI_6 */ +#define XPAR_PSU_AFI_6_S_AXI_BASEADDR 0xFF9B0000 +#define XPAR_PSU_AFI_6_S_AXI_HIGHADDR 0xFF9BFFFF + + +/* Definitions for peripheral PSU_APU */ +#define XPAR_PSU_APU_S_AXI_BASEADDR 0xFD5C0000 +#define XPAR_PSU_APU_S_AXI_HIGHADDR 0xFD5CFFFF + + +/* Definitions for peripheral PSU_BBRAM_0 */ +#define XPAR_PSU_BBRAM_0_S_AXI_BASEADDR 0xFFCD0000 +#define XPAR_PSU_BBRAM_0_S_AXI_HIGHADDR 0xFFCDFFFF + + +/* Definitions for peripheral PSU_CCI_GPV */ +#define XPAR_PSU_CCI_GPV_S_AXI_BASEADDR 0xFD6E0000 +#define XPAR_PSU_CCI_GPV_S_AXI_HIGHADDR 0xFD6EFFFF + + +/* Definitions for peripheral PSU_CCI_REG */ +#define XPAR_PSU_CCI_REG_S_AXI_BASEADDR 0xFD5E0000 +#define XPAR_PSU_CCI_REG_S_AXI_HIGHADDR 0xFD5EFFFF + + +/* Definitions for peripheral PSU_CRF_APB */ +#define XPAR_PSU_CRF_APB_S_AXI_BASEADDR 0xFD1A0000 +#define XPAR_PSU_CRF_APB_S_AXI_HIGHADDR 0xFD2DFFFF + + +/* Definitions for peripheral PSU_CRL_APB */ +#define XPAR_PSU_CRL_APB_S_AXI_BASEADDR 0xFF5E0000 +#define XPAR_PSU_CRL_APB_S_AXI_HIGHADDR 0xFF85FFFF + + +/* Definitions for peripheral PSU_CSU_0 */ +#define XPAR_PSU_CSU_0_S_AXI_BASEADDR 0xFFCA0000 +#define XPAR_PSU_CSU_0_S_AXI_HIGHADDR 0xFFCAFFFF + + +/* Definitions for peripheral PSU_DDR_PHY */ +#define XPAR_PSU_DDR_PHY_S_AXI_BASEADDR 0xFD080000 +#define XPAR_PSU_DDR_PHY_S_AXI_HIGHADDR 0xFD08FFFF + + +/* Definitions for peripheral PSU_DDR_QOS_CTRL */ +#define XPAR_PSU_DDR_QOS_CTRL_S_AXI_BASEADDR 0xFD090000 +#define XPAR_PSU_DDR_QOS_CTRL_S_AXI_HIGHADDR 0xFD09FFFF + + +/* Definitions for peripheral PSU_DDR_XMPU0_CFG */ +#define XPAR_PSU_DDR_XMPU0_CFG_S_AXI_BASEADDR 0xFD000000 +#define XPAR_PSU_DDR_XMPU0_CFG_S_AXI_HIGHADDR 0xFD00FFFF + + +/* Definitions for peripheral PSU_DDR_XMPU1_CFG */ +#define XPAR_PSU_DDR_XMPU1_CFG_S_AXI_BASEADDR 0xFD010000 +#define XPAR_PSU_DDR_XMPU1_CFG_S_AXI_HIGHADDR 0xFD01FFFF + + +/* Definitions for peripheral PSU_DDR_XMPU2_CFG */ +#define XPAR_PSU_DDR_XMPU2_CFG_S_AXI_BASEADDR 0xFD020000 +#define XPAR_PSU_DDR_XMPU2_CFG_S_AXI_HIGHADDR 0xFD02FFFF + + +/* Definitions for peripheral PSU_DDR_XMPU3_CFG */ +#define XPAR_PSU_DDR_XMPU3_CFG_S_AXI_BASEADDR 0xFD030000 +#define XPAR_PSU_DDR_XMPU3_CFG_S_AXI_HIGHADDR 0xFD03FFFF + + +/* Definitions for peripheral PSU_DDR_XMPU4_CFG */ +#define XPAR_PSU_DDR_XMPU4_CFG_S_AXI_BASEADDR 0xFD040000 +#define XPAR_PSU_DDR_XMPU4_CFG_S_AXI_HIGHADDR 0xFD04FFFF + + +/* Definitions for peripheral PSU_DDR_XMPU5_CFG */ +#define XPAR_PSU_DDR_XMPU5_CFG_S_AXI_BASEADDR 0xFD050000 +#define XPAR_PSU_DDR_XMPU5_CFG_S_AXI_HIGHADDR 0xFD05FFFF + + +/* Definitions for peripheral PSU_DDRC_0 */ +#define XPAR_PSU_DDRC_0_S_AXI_BASEADDR 0xFD070000 +#define XPAR_PSU_DDRC_0_S_AXI_HIGHADDR 0xFD070FFF + + +/* Definitions for peripheral PSU_DP */ +#define XPAR_PSU_DP_S_AXI_BASEADDR 0xFD4A0000 +#define XPAR_PSU_DP_S_AXI_HIGHADDR 0xFD4AFFFF + + +/* Definitions for peripheral PSU_DPDMA */ +#define XPAR_PSU_DPDMA_S_AXI_BASEADDR 0xFD4C0000 +#define XPAR_PSU_DPDMA_S_AXI_HIGHADDR 0xFD4CFFFF + + +/* Definitions for peripheral PSU_EFUSE */ +#define XPAR_PSU_EFUSE_S_AXI_BASEADDR 0xFFCC0000 +#define XPAR_PSU_EFUSE_S_AXI_HIGHADDR 0xFFCCFFFF + + +/* Definitions for peripheral PSU_FPD_GPV */ +#define XPAR_PSU_FPD_GPV_S_AXI_BASEADDR 0xFD700000 +#define XPAR_PSU_FPD_GPV_S_AXI_HIGHADDR 0xFD7FFFFF + + +/* Definitions for peripheral PSU_FPD_SLCR */ +#define XPAR_PSU_FPD_SLCR_S_AXI_BASEADDR 0xFD610000 +#define XPAR_PSU_FPD_SLCR_S_AXI_HIGHADDR 0xFD68FFFF + + +/* Definitions for peripheral PSU_FPD_SLCR_SECURE */ +#define XPAR_PSU_FPD_SLCR_SECURE_S_AXI_BASEADDR 0xFD690000 +#define XPAR_PSU_FPD_SLCR_SECURE_S_AXI_HIGHADDR 0xFD6CFFFF + + +/* Definitions for peripheral PSU_FPD_XMPU_CFG */ +#define XPAR_PSU_FPD_XMPU_CFG_S_AXI_BASEADDR 0xFD5D0000 +#define XPAR_PSU_FPD_XMPU_CFG_S_AXI_HIGHADDR 0xFD5DFFFF + + +/* Definitions for peripheral PSU_FPD_XMPU_SINK */ +#define XPAR_PSU_FPD_XMPU_SINK_S_AXI_BASEADDR 0xFD4F0000 +#define XPAR_PSU_FPD_XMPU_SINK_S_AXI_HIGHADDR 0xFD4FFFFF + + +/* Definitions for peripheral PSU_GPU */ +#define XPAR_PSU_GPU_S_AXI_BASEADDR 0xFD4B0000 +#define XPAR_PSU_GPU_S_AXI_HIGHADDR 0xFD4BFFFF + + +/* Definitions for peripheral PSU_IOU_S */ +#define XPAR_PSU_IOU_S_S_AXI_BASEADDR 0xFF000000 +#define XPAR_PSU_IOU_S_S_AXI_HIGHADDR 0xFF2AFFFF + + +/* Definitions for peripheral PSU_IOU_SCNTR */ +#define XPAR_PSU_IOU_SCNTR_S_AXI_BASEADDR 0xFF250000 +#define XPAR_PSU_IOU_SCNTR_S_AXI_HIGHADDR 0xFF25FFFF + + +/* Definitions for peripheral PSU_IOU_SCNTRS */ +#define XPAR_PSU_IOU_SCNTRS_S_AXI_BASEADDR 0xFF260000 +#define XPAR_PSU_IOU_SCNTRS_S_AXI_HIGHADDR 0xFF26FFFF + + +/* Definitions for peripheral PSU_IOUSECURE_SLCR */ +#define XPAR_PSU_IOUSECURE_SLCR_S_AXI_BASEADDR 0xFF240000 +#define XPAR_PSU_IOUSECURE_SLCR_S_AXI_HIGHADDR 0xFF24FFFF + + +/* Definitions for peripheral PSU_IOUSLCR_0 */ +#define XPAR_PSU_IOUSLCR_0_S_AXI_BASEADDR 0xFF180000 +#define XPAR_PSU_IOUSLCR_0_S_AXI_HIGHADDR 0xFF23FFFF + + +/* Definitions for peripheral PSU_LPD_SLCR */ +#define XPAR_PSU_LPD_SLCR_S_AXI_BASEADDR 0xFF410000 +#define XPAR_PSU_LPD_SLCR_S_AXI_HIGHADDR 0xFF4AFFFF + + +/* Definitions for peripheral PSU_LPD_SLCR_SECURE */ +#define XPAR_PSU_LPD_SLCR_SECURE_S_AXI_BASEADDR 0xFF4B0000 +#define XPAR_PSU_LPD_SLCR_SECURE_S_AXI_HIGHADDR 0xFF4DFFFF + + +/* Definitions for peripheral PSU_LPD_XPPU */ +#define XPAR_PSU_LPD_XPPU_S_AXI_BASEADDR 0xFF980000 +#define XPAR_PSU_LPD_XPPU_S_AXI_HIGHADDR 0xFF99FFFF + + +/* Definitions for peripheral PSU_LPD_XPPU_SINK */ +#define XPAR_PSU_LPD_XPPU_SINK_S_AXI_BASEADDR 0xFF9C0000 +#define XPAR_PSU_LPD_XPPU_SINK_S_AXI_HIGHADDR 0xFF9CFFFF + + +/* Definitions for peripheral PSU_MBISTJTAG */ +#define XPAR_PSU_MBISTJTAG_S_AXI_BASEADDR 0xFFCF0000 +#define XPAR_PSU_MBISTJTAG_S_AXI_HIGHADDR 0xFFCFFFFF + + +/* Definitions for peripheral PSU_OCM */ +#define XPAR_PSU_OCM_S_AXI_BASEADDR 0xFF960000 +#define XPAR_PSU_OCM_S_AXI_HIGHADDR 0xFF96FFFF + + +/* Definitions for peripheral PSU_OCM_RAM_0 */ +#define XPAR_PSU_OCM_RAM_0_S_AXI_BASEADDR 0xFFFC0000 +#define XPAR_PSU_OCM_RAM_0_S_AXI_HIGHADDR 0xFFFEFFFF + + +/* Definitions for peripheral PSU_OCM_RAM_1 */ +#define XPAR_PSU_OCM_RAM_1_S_AXI_BASEADDR 0xFFFF0000 +#define XPAR_PSU_OCM_RAM_1_S_AXI_HIGHADDR 0xFFFFFFFF + + +/* Definitions for peripheral PSU_OCM_XMPU_CFG */ +#define XPAR_PSU_OCM_XMPU_CFG_S_AXI_BASEADDR 0xFFA70000 +#define XPAR_PSU_OCM_XMPU_CFG_S_AXI_HIGHADDR 0xFFA7FFFF + + +/* Definitions for peripheral PSU_PCIE */ +#define XPAR_PSU_PCIE_S_AXI_BASEADDR 0xFD0E0000 +#define XPAR_PSU_PCIE_S_AXI_HIGHADDR 0xFD0EFFFF + + +/* Definitions for peripheral PSU_PCIE_ATTRIB_0 */ +#define XPAR_PSU_PCIE_ATTRIB_0_S_AXI_BASEADDR 0xFD480000 +#define XPAR_PSU_PCIE_ATTRIB_0_S_AXI_HIGHADDR 0xFD48FFFF + + +/* Definitions for peripheral PSU_PCIE_DMA */ +#define XPAR_PSU_PCIE_DMA_S_AXI_BASEADDR 0xFD0F0000 +#define XPAR_PSU_PCIE_DMA_S_AXI_HIGHADDR 0xFD0FFFFF + + +/* Definitions for peripheral PSU_PMU_GLOBAL_0 */ +#define XPAR_PSU_PMU_GLOBAL_0_S_AXI_BASEADDR 0xFFD80000 +#define XPAR_PSU_PMU_GLOBAL_0_S_AXI_HIGHADDR 0xFFDBFFFF + + +/* Definitions for peripheral PSU_PMU_IOMODULE */ +#define XPAR_PSU_PMU_IOMODULE_S_AXI_BASEADDR 0xFFD40000 +#define XPAR_PSU_PMU_IOMODULE_S_AXI_HIGHADDR 0xFFD5FFFF + + +/* Definitions for peripheral PSU_PMU_RAM */ +#define XPAR_PSU_PMU_RAM_S_AXI_BASEADDR 0xFFDC0000 +#define XPAR_PSU_PMU_RAM_S_AXI_HIGHADDR 0xFFDDFFFF + + +/* Definitions for peripheral PSU_QSPI_LINEAR_0 */ +#define XPAR_PSU_QSPI_LINEAR_0_S_AXI_BASEADDR 0xC0000000 +#define XPAR_PSU_QSPI_LINEAR_0_S_AXI_HIGHADDR 0xDFFFFFFF + + +/* Definitions for peripheral PSU_R5_0_ATCM */ +#define XPAR_PSU_R5_0_ATCM_S_AXI_BASEADDR 0xFFE00000 +#define XPAR_PSU_R5_0_ATCM_S_AXI_HIGHADDR 0xFFE0FFFF + + +/* Definitions for peripheral PSU_R5_0_ATCM_LOCKSTEP */ +#define XPAR_PSU_R5_0_ATCM_LOCKSTEP_S_AXI_BASEADDR 0xFFE10000 +#define XPAR_PSU_R5_0_ATCM_LOCKSTEP_S_AXI_HIGHADDR 0xFFE1FFFF + + +/* Definitions for peripheral PSU_R5_0_BTCM */ +#define XPAR_PSU_R5_0_BTCM_S_AXI_BASEADDR 0xFFE20000 +#define XPAR_PSU_R5_0_BTCM_S_AXI_HIGHADDR 0xFFE2FFFF + + +/* Definitions for peripheral PSU_R5_0_BTCM_LOCKSTEP */ +#define XPAR_PSU_R5_0_BTCM_LOCKSTEP_S_AXI_BASEADDR 0xFFE30000 +#define XPAR_PSU_R5_0_BTCM_LOCKSTEP_S_AXI_HIGHADDR 0xFFE3FFFF + + +/* Definitions for peripheral PSU_R5_1_ATCM */ +#define XPAR_PSU_R5_1_ATCM_S_AXI_BASEADDR 0xFFE90000 +#define XPAR_PSU_R5_1_ATCM_S_AXI_HIGHADDR 0xFFE9FFFF + + +/* Definitions for peripheral PSU_R5_1_BTCM */ +#define XPAR_PSU_R5_1_BTCM_S_AXI_BASEADDR 0xFFEB0000 +#define XPAR_PSU_R5_1_BTCM_S_AXI_HIGHADDR 0xFFEBFFFF + + +/* Definitions for peripheral PSU_R5_DDR_0 */ +#define XPAR_PSU_R5_DDR_0_S_AXI_BASEADDR 0x00100000 +#define XPAR_PSU_R5_DDR_0_S_AXI_HIGHADDR 0xFFFFFFFF + + +/* Definitions for peripheral PSU_R5_TCM_RAM_0 */ +#define XPAR_PSU_R5_TCM_RAM_0_S_AXI_BASEADDR 0x00000000 +#define XPAR_PSU_R5_TCM_RAM_0_S_AXI_HIGHADDR 0x00020000 + + +/* Definitions for peripheral PSU_RPU */ +#define XPAR_PSU_RPU_S_AXI_BASEADDR 0xFF9A0000 +#define XPAR_PSU_RPU_S_AXI_HIGHADDR 0xFF9AFFFF + + +/* Definitions for peripheral PSU_RSA */ +#define XPAR_PSU_RSA_S_AXI_BASEADDR 0xFFCE0000 +#define XPAR_PSU_RSA_S_AXI_HIGHADDR 0xFFCEFFFF + + +/* Definitions for peripheral PSU_SATA */ +#define XPAR_PSU_SATA_S_AXI_BASEADDR 0xFD0C0000 +#define XPAR_PSU_SATA_S_AXI_HIGHADDR 0xFD0CFFFF + + +/* Definitions for peripheral PSU_SERDES */ +#define XPAR_PSU_SERDES_S_AXI_BASEADDR 0xFD400000 +#define XPAR_PSU_SERDES_S_AXI_HIGHADDR 0xFD47FFFF + + +/* Definitions for peripheral PSU_SIOU */ +#define XPAR_PSU_SIOU_S_AXI_BASEADDR 0xFD3D0000 +#define XPAR_PSU_SIOU_S_AXI_HIGHADDR 0xFD3DFFFF + + +/* Definitions for peripheral PSU_SMMU_GPV */ +#define XPAR_PSU_SMMU_GPV_S_AXI_BASEADDR 0xFD800000 +#define XPAR_PSU_SMMU_GPV_S_AXI_HIGHADDR 0xFDFFFFFF + + +/* Definitions for peripheral PSU_SMMU_REG */ +#define XPAR_PSU_SMMU_REG_S_AXI_BASEADDR 0xFD5F0000 +#define XPAR_PSU_SMMU_REG_S_AXI_HIGHADDR 0xFD5FFFFF + + +/* Definitions for peripheral PSU_USB_0 */ +#define XPAR_PSU_USB_0_S_AXI_BASEADDR 0xFE200000 +#define XPAR_PSU_USB_0_S_AXI_HIGHADDR 0xFE20FFFF + + +/******************************************************************/ + +/* Definitions for driver GPIOPS */ +#define XPAR_XGPIOPS_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_GPIO_0 */ +#define XPAR_PSU_GPIO_0_DEVICE_ID 0 +#define XPAR_PSU_GPIO_0_BASEADDR 0xFF0A0000 +#define XPAR_PSU_GPIO_0_HIGHADDR 0xFF0AFFFF + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_GPIO_0 */ +#define XPAR_XGPIOPS_0_DEVICE_ID XPAR_PSU_GPIO_0_DEVICE_ID +#define XPAR_XGPIOPS_0_BASEADDR 0xFF0A0000 +#define XPAR_XGPIOPS_0_HIGHADDR 0xFF0AFFFF + + +/******************************************************************/ + +/* Definitions for driver IICPS */ +#define XPAR_XIICPS_NUM_INSTANCES 2 + +/* Definitions for peripheral PSU_I2C_0 */ +#define XPAR_PSU_I2C_0_DEVICE_ID 0 +#define XPAR_PSU_I2C_0_BASEADDR 0xFF020000 +#define XPAR_PSU_I2C_0_HIGHADDR 0xFF02FFFF +#define XPAR_PSU_I2C_0_I2C_CLK_FREQ_HZ 99998999 + + +/* Definitions for peripheral PSU_I2C_1 */ +#define XPAR_PSU_I2C_1_DEVICE_ID 1 +#define XPAR_PSU_I2C_1_BASEADDR 0xFF030000 +#define XPAR_PSU_I2C_1_HIGHADDR 0xFF03FFFF +#define XPAR_PSU_I2C_1_I2C_CLK_FREQ_HZ 99998999 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_I2C_0 */ +#define XPAR_XIICPS_0_DEVICE_ID XPAR_PSU_I2C_0_DEVICE_ID +#define XPAR_XIICPS_0_BASEADDR 0xFF020000 +#define XPAR_XIICPS_0_HIGHADDR 0xFF02FFFF +#define XPAR_XIICPS_0_I2C_CLK_FREQ_HZ 99998999 + +/* Canonical definitions for peripheral PSU_I2C_1 */ +#define XPAR_XIICPS_1_DEVICE_ID XPAR_PSU_I2C_1_DEVICE_ID +#define XPAR_XIICPS_1_BASEADDR 0xFF030000 +#define XPAR_XIICPS_1_HIGHADDR 0xFF03FFFF +#define XPAR_XIICPS_1_I2C_CLK_FREQ_HZ 99998999 + + +/******************************************************************/ + +#define XPAR_XIPIPSU_NUM_INSTANCES 2 + +/* Parameter definitions for peripheral psu_ipi_1 */ +#define XPAR_PSU_IPI_1_DEVICE_ID 0 +#define XPAR_PSU_IPI_1_BASE_ADDRESS 0xFF310000 +#define XPAR_PSU_IPI_1_BIT_MASK 0x00000100 +#define XPAR_PSU_IPI_1_BUFFER_INDEX 0 +#define XPAR_PSU_IPI_1_INT_ID 65 + +/* Parameter definitions for peripheral psu_ipi_2 */ +#define XPAR_PSU_IPI_2_DEVICE_ID 1 +#define XPAR_PSU_IPI_2_BASE_ADDRESS 0xFF320000 +#define XPAR_PSU_IPI_2_BIT_MASK 0x00000200 +#define XPAR_PSU_IPI_2_BUFFER_INDEX 1 +#define XPAR_PSU_IPI_2_INT_ID 66 + +/* Canonical definitions for peripheral psu_ipi_1 */ +#define XPAR_XIPIPSU_0_DEVICE_ID XPAR_PSU_IPI_1_DEVICE_ID +#define XPAR_XIPIPSU_0_BASE_ADDRESS XPAR_PSU_IPI_1_BASE_ADDRESS +#define XPAR_XIPIPSU_0_BIT_MASK XPAR_PSU_IPI_1_BIT_MASK +#define XPAR_XIPIPSU_0_BUFFER_INDEX XPAR_PSU_IPI_1_BUFFER_INDEX +#define XPAR_XIPIPSU_0_INT_ID XPAR_PSU_IPI_1_INT_ID + +/* Canonical definitions for peripheral psu_ipi_2 */ +#define XPAR_XIPIPSU_1_DEVICE_ID XPAR_PSU_IPI_2_DEVICE_ID +#define XPAR_XIPIPSU_1_BASE_ADDRESS XPAR_PSU_IPI_2_BASE_ADDRESS +#define XPAR_XIPIPSU_1_BIT_MASK XPAR_PSU_IPI_2_BIT_MASK +#define XPAR_XIPIPSU_1_BUFFER_INDEX XPAR_PSU_IPI_2_BUFFER_INDEX +#define XPAR_XIPIPSU_1_INT_ID XPAR_PSU_IPI_2_INT_ID + +#define XPAR_XIPIPSU_NUM_TARGETS 11 + +#define XPAR_PSU_IPI_0_BIT_MASK 0x00000001 +#define XPAR_PSU_IPI_0_BUFFER_INDEX 2 +#define XPAR_PSU_IPI_1_BIT_MASK 0x00000100 +#define XPAR_PSU_IPI_1_BUFFER_INDEX 0 +#define XPAR_PSU_IPI_2_BIT_MASK 0x00000200 +#define XPAR_PSU_IPI_2_BUFFER_INDEX 1 +#define XPAR_PSU_IPI_3_BIT_MASK 0x00010000 +#define XPAR_PSU_IPI_3_BUFFER_INDEX 7 +#define XPAR_PSU_IPI_4_BIT_MASK 0x00020000 +#define XPAR_PSU_IPI_4_BUFFER_INDEX 7 +#define XPAR_PSU_IPI_5_BIT_MASK 0x00040000 +#define XPAR_PSU_IPI_5_BUFFER_INDEX 7 +#define XPAR_PSU_IPI_6_BIT_MASK 0x00080000 +#define XPAR_PSU_IPI_6_BUFFER_INDEX 7 +#define XPAR_PSU_IPI_7_BIT_MASK 0x01000000 +#define XPAR_PSU_IPI_7_BUFFER_INDEX 3 +#define XPAR_PSU_IPI_8_BIT_MASK 0x02000000 +#define XPAR_PSU_IPI_8_BUFFER_INDEX 4 +#define XPAR_PSU_IPI_9_BIT_MASK 0x04000000 +#define XPAR_PSU_IPI_9_BUFFER_INDEX 5 +#define XPAR_PSU_IPI_10_BIT_MASK 0x08000000 +#define XPAR_PSU_IPI_10_BUFFER_INDEX 6 +/* Target List for referring to processor IPI Targets */ + +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH0_INDEX 0 + +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH0_INDEX 0 + +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH0_INDEX 0 + +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH0_INDEX 0 + +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH0_MASK XPAR_PSU_IPI_1_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH0_INDEX 1 +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH1_MASK XPAR_PSU_IPI_2_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH1_INDEX 2 + +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH0_MASK XPAR_PSU_IPI_1_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH0_INDEX 1 +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH1_MASK XPAR_PSU_IPI_2_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH1_INDEX 2 + +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH0_MASK XPAR_PSU_IPI_3_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH0_INDEX 3 +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH1_MASK XPAR_PSU_IPI_4_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH1_INDEX 4 +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH2_MASK XPAR_PSU_IPI_5_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH2_INDEX 5 +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH3_MASK XPAR_PSU_IPI_6_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH3_INDEX 6 + +/* Definitions for driver QSPIPSU */ +#define XPAR_XQSPIPSU_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_QSPI_0 */ +#define XPAR_PSU_QSPI_0_DEVICE_ID 0 +#define XPAR_PSU_QSPI_0_BASEADDR 0xFF0F0000 +#define XPAR_PSU_QSPI_0_HIGHADDR 0xFF0FFFFF +#define XPAR_PSU_QSPI_0_QSPI_CLK_FREQ_HZ 124998749 +#define XPAR_PSU_QSPI_0_QSPI_MODE 2 +#define XPAR_PSU_QSPI_0_QSPI_BUS_WIDTH 2 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_QSPI_0 */ +#define XPAR_XQSPIPSU_0_DEVICE_ID XPAR_PSU_QSPI_0_DEVICE_ID +#define XPAR_XQSPIPSU_0_BASEADDR 0xFF0F0000 +#define XPAR_XQSPIPSU_0_HIGHADDR 0xFF0FFFFF +#define XPAR_XQSPIPSU_0_QSPI_CLK_FREQ_HZ 124998749 +#define XPAR_XQSPIPSU_0_QSPI_MODE 2 +#define XPAR_XQSPIPSU_0_QSPI_BUS_WIDTH 2 + + +/******************************************************************/ + +/* Definitions for driver RTCPSU */ +#define XPAR_XRTCPSU_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_RTC */ +#define XPAR_PSU_RTC_DEVICE_ID 0 +#define XPAR_PSU_RTC_BASEADDR 0xFFA60000 +#define XPAR_PSU_RTC_HIGHADDR 0xFFA6FFFF + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_RTC */ +#define XPAR_XRTCPSU_0_DEVICE_ID XPAR_PSU_RTC_DEVICE_ID +#define XPAR_XRTCPSU_0_BASEADDR 0xFFA60000 +#define XPAR_XRTCPSU_0_HIGHADDR 0xFFA6FFFF + + +/******************************************************************/ + +/* Definitions for driver SCUGIC */ +#define XPAR_XSCUGIC_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_RCPU_GIC */ +#define XPAR_PSU_RCPU_GIC_DEVICE_ID 0 +#define XPAR_PSU_RCPU_GIC_BASEADDR 0xF9001000 +#define XPAR_PSU_RCPU_GIC_HIGHADDR 0xF9001FFF +#define XPAR_PSU_RCPU_GIC_DIST_BASEADDR 0xF9000000 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_RCPU_GIC */ +#define XPAR_SCUGIC_0_DEVICE_ID 0 +#define XPAR_SCUGIC_0_CPU_BASEADDR 0xF9001000 +#define XPAR_SCUGIC_0_CPU_HIGHADDR 0xF9001FFF +#define XPAR_SCUGIC_0_DIST_BASEADDR 0xF9000000 + + +/******************************************************************/ + +/* Definitions for driver SDPS */ +#define XPAR_XSDPS_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_SD_1 */ +#define XPAR_PSU_SD_1_DEVICE_ID 0 +#define XPAR_PSU_SD_1_BASEADDR 0xFF170000 +#define XPAR_PSU_SD_1_HIGHADDR 0xFF17FFFF +#define XPAR_PSU_SD_1_SDIO_CLK_FREQ_HZ 199998006 +#define XPAR_PSU_SD_1_HAS_CD 1 +#define XPAR_PSU_SD_1_HAS_WP 1 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_SD_1 */ +#define XPAR_XSDPS_0_DEVICE_ID XPAR_PSU_SD_1_DEVICE_ID +#define XPAR_XSDPS_0_BASEADDR 0xFF170000 +#define XPAR_XSDPS_0_HIGHADDR 0xFF17FFFF +#define XPAR_XSDPS_0_SDIO_CLK_FREQ_HZ 199998006 +#define XPAR_XSDPS_0_HAS_CD 1 +#define XPAR_XSDPS_0_HAS_WP 1 + + +/******************************************************************/ + +/* Definitions for driver SYSMONPSU */ +#define XPAR_XSYSMONPSU_NUM_INSTANCES 1 + +/* Definitions for peripheral PSU_AMS */ +#define XPAR_PSU_AMS_DEVICE_ID 0 +#define XPAR_PSU_AMS_BASEADDR 0xFFA50000 +#define XPAR_PSU_AMS_HIGHADDR 0xFFA5FFFF + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_AMS */ +#define XPAR_XSYSMONPSU_0_DEVICE_ID XPAR_PSU_AMS_DEVICE_ID +#define XPAR_XSYSMONPSU_0_BASEADDR 0xFFA50000 +#define XPAR_XSYSMONPSU_0_HIGHADDR 0xFFA5FFFF + + +/******************************************************************/ + +/* Definitions for driver TTCPS */ +#define XPAR_XTTCPS_NUM_INSTANCES 12 + +/* Definitions for peripheral PSU_TTC_0 */ +#define XPAR_PSU_TTC_0_DEVICE_ID 0 +#define XPAR_PSU_TTC_0_BASEADDR 0XFF110000 +#define XPAR_PSU_TTC_0_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_0_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_1_DEVICE_ID 1 +#define XPAR_PSU_TTC_1_BASEADDR 0XFF110004 +#define XPAR_PSU_TTC_1_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_1_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_2_DEVICE_ID 2 +#define XPAR_PSU_TTC_2_BASEADDR 0XFF110008 +#define XPAR_PSU_TTC_2_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_2_TTC_CLK_CLKSRC 0 + + +/* Definitions for peripheral PSU_TTC_1 */ +#define XPAR_PSU_TTC_3_DEVICE_ID 3 +#define XPAR_PSU_TTC_3_BASEADDR 0XFF120000 +#define XPAR_PSU_TTC_3_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_3_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_4_DEVICE_ID 4 +#define XPAR_PSU_TTC_4_BASEADDR 0XFF120004 +#define XPAR_PSU_TTC_4_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_4_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_5_DEVICE_ID 5 +#define XPAR_PSU_TTC_5_BASEADDR 0XFF120008 +#define XPAR_PSU_TTC_5_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_5_TTC_CLK_CLKSRC 0 + + +/* Definitions for peripheral PSU_TTC_2 */ +#define XPAR_PSU_TTC_6_DEVICE_ID 6 +#define XPAR_PSU_TTC_6_BASEADDR 0XFF130000 +#define XPAR_PSU_TTC_6_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_6_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_7_DEVICE_ID 7 +#define XPAR_PSU_TTC_7_BASEADDR 0XFF130004 +#define XPAR_PSU_TTC_7_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_7_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_8_DEVICE_ID 8 +#define XPAR_PSU_TTC_8_BASEADDR 0XFF130008 +#define XPAR_PSU_TTC_8_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_8_TTC_CLK_CLKSRC 0 + + +/* Definitions for peripheral PSU_TTC_3 */ +#define XPAR_PSU_TTC_9_DEVICE_ID 9 +#define XPAR_PSU_TTC_9_BASEADDR 0XFF140000 +#define XPAR_PSU_TTC_9_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_9_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_10_DEVICE_ID 10 +#define XPAR_PSU_TTC_10_BASEADDR 0XFF140004 +#define XPAR_PSU_TTC_10_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_10_TTC_CLK_CLKSRC 0 +#define XPAR_PSU_TTC_11_DEVICE_ID 11 +#define XPAR_PSU_TTC_11_BASEADDR 0XFF140008 +#define XPAR_PSU_TTC_11_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_PSU_TTC_11_TTC_CLK_CLKSRC 0 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_TTC_0 */ +#define XPAR_XTTCPS_0_DEVICE_ID XPAR_PSU_TTC_0_DEVICE_ID +#define XPAR_XTTCPS_0_BASEADDR 0xFF110000 +#define XPAR_XTTCPS_0_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_0_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_1_DEVICE_ID XPAR_PSU_TTC_1_DEVICE_ID +#define XPAR_XTTCPS_1_BASEADDR 0xFF110004 +#define XPAR_XTTCPS_1_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_1_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_2_DEVICE_ID XPAR_PSU_TTC_2_DEVICE_ID +#define XPAR_XTTCPS_2_BASEADDR 0xFF110008 +#define XPAR_XTTCPS_2_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_2_TTC_CLK_CLKSRC 0 + +/* Canonical definitions for peripheral PSU_TTC_1 */ +#define XPAR_XTTCPS_3_DEVICE_ID XPAR_PSU_TTC_3_DEVICE_ID +#define XPAR_XTTCPS_3_BASEADDR 0xFF120000 +#define XPAR_XTTCPS_3_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_3_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_4_DEVICE_ID XPAR_PSU_TTC_4_DEVICE_ID +#define XPAR_XTTCPS_4_BASEADDR 0xFF120004 +#define XPAR_XTTCPS_4_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_4_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_5_DEVICE_ID XPAR_PSU_TTC_5_DEVICE_ID +#define XPAR_XTTCPS_5_BASEADDR 0xFF120008 +#define XPAR_XTTCPS_5_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_5_TTC_CLK_CLKSRC 0 + +/* Canonical definitions for peripheral PSU_TTC_2 */ +#define XPAR_XTTCPS_6_DEVICE_ID XPAR_PSU_TTC_6_DEVICE_ID +#define XPAR_XTTCPS_6_BASEADDR 0xFF130000 +#define XPAR_XTTCPS_6_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_6_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_7_DEVICE_ID XPAR_PSU_TTC_7_DEVICE_ID +#define XPAR_XTTCPS_7_BASEADDR 0xFF130004 +#define XPAR_XTTCPS_7_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_7_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_8_DEVICE_ID XPAR_PSU_TTC_8_DEVICE_ID +#define XPAR_XTTCPS_8_BASEADDR 0xFF130008 +#define XPAR_XTTCPS_8_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_8_TTC_CLK_CLKSRC 0 + +/* Canonical definitions for peripheral PSU_TTC_3 */ +#define XPAR_XTTCPS_9_DEVICE_ID XPAR_PSU_TTC_9_DEVICE_ID +#define XPAR_XTTCPS_9_BASEADDR 0xFF140000 +#define XPAR_XTTCPS_9_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_9_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_10_DEVICE_ID XPAR_PSU_TTC_10_DEVICE_ID +#define XPAR_XTTCPS_10_BASEADDR 0xFF140004 +#define XPAR_XTTCPS_10_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_10_TTC_CLK_CLKSRC 0 + +#define XPAR_XTTCPS_11_DEVICE_ID XPAR_PSU_TTC_11_DEVICE_ID +#define XPAR_XTTCPS_11_BASEADDR 0xFF140008 +#define XPAR_XTTCPS_11_TTC_CLK_FREQ_HZ 100000000 +#define XPAR_XTTCPS_11_TTC_CLK_CLKSRC 0 + + +/******************************************************************/ + +/* Definitions for driver UARTPS */ +#define XPAR_XUARTPS_NUM_INSTANCES 2 + +/* Definitions for peripheral PSU_UART_0 */ +#define XPAR_PSU_UART_0_DEVICE_ID 0 +#define XPAR_PSU_UART_0_BASEADDR 0xFF000000 +#define XPAR_PSU_UART_0_HIGHADDR 0xFF00FFFF +#define XPAR_PSU_UART_0_UART_CLK_FREQ_HZ 99998999 +#define XPAR_PSU_UART_0_HAS_MODEM 0 + + +/* Definitions for peripheral PSU_UART_1 */ +#define XPAR_PSU_UART_1_DEVICE_ID 1 +#define XPAR_PSU_UART_1_BASEADDR 0xFF010000 +#define XPAR_PSU_UART_1_HIGHADDR 0xFF01FFFF +#define XPAR_PSU_UART_1_UART_CLK_FREQ_HZ 99998999 +#define XPAR_PSU_UART_1_HAS_MODEM 0 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_UART_0 */ +#define XPAR_XUARTPS_0_DEVICE_ID XPAR_PSU_UART_0_DEVICE_ID +#define XPAR_XUARTPS_0_BASEADDR 0xFF000000 +#define XPAR_XUARTPS_0_HIGHADDR 0xFF00FFFF +#define XPAR_XUARTPS_0_UART_CLK_FREQ_HZ 99998999 +#define XPAR_XUARTPS_0_HAS_MODEM 0 + +/* Canonical definitions for peripheral PSU_UART_1 */ +#define XPAR_XUARTPS_1_DEVICE_ID XPAR_PSU_UART_1_DEVICE_ID +#define XPAR_XUARTPS_1_BASEADDR 0xFF010000 +#define XPAR_XUARTPS_1_HIGHADDR 0xFF01FFFF +#define XPAR_XUARTPS_1_UART_CLK_FREQ_HZ 99998999 +#define XPAR_XUARTPS_1_HAS_MODEM 0 + + +/******************************************************************/ + +/* Definitions for driver WDTPS */ +#define XPAR_XWDTPS_NUM_INSTANCES 2 + +/* Definitions for peripheral PSU_WDT_0 */ +#define XPAR_PSU_WDT_0_DEVICE_ID 0 +#define XPAR_PSU_WDT_0_BASEADDR 0xFF150000 +#define XPAR_PSU_WDT_0_HIGHADDR 0xFF15FFFF +#define XPAR_PSU_WDT_0_WDT_CLK_FREQ_HZ 25000000 + + +/* Definitions for peripheral PSU_WDT_1 */ +#define XPAR_PSU_WDT_1_DEVICE_ID 1 +#define XPAR_PSU_WDT_1_BASEADDR 0xFD4D0000 +#define XPAR_PSU_WDT_1_HIGHADDR 0xFD4DFFFF +#define XPAR_PSU_WDT_1_WDT_CLK_FREQ_HZ 25000000 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_WDT_0 */ +#define XPAR_XWDTPS_0_DEVICE_ID XPAR_PSU_WDT_0_DEVICE_ID +#define XPAR_XWDTPS_0_BASEADDR 0xFF150000 +#define XPAR_XWDTPS_0_HIGHADDR 0xFF15FFFF +#define XPAR_XWDTPS_0_WDT_CLK_FREQ_HZ 25000000 + +/* Canonical definitions for peripheral PSU_WDT_1 */ +#define XPAR_XWDTPS_1_DEVICE_ID XPAR_PSU_WDT_1_DEVICE_ID +#define XPAR_XWDTPS_1_BASEADDR 0xFD4D0000 +#define XPAR_XWDTPS_1_HIGHADDR 0xFD4DFFFF +#define XPAR_XWDTPS_1_WDT_CLK_FREQ_HZ 25000000 + + +/******************************************************************/ + +/* Definitions for driver ZDMA */ +#define XPAR_XZDMA_NUM_INSTANCES 16 + +/* Definitions for peripheral PSU_ADMA_0 */ +#define XPAR_PSU_ADMA_0_DEVICE_ID 0 +#define XPAR_PSU_ADMA_0_BASEADDR 0xFFA80000 +#define XPAR_PSU_ADMA_0_DMA_MODE 1 +#define XPAR_PSU_ADMA_0_HIGHADDR 0xFFA8FFFF +#define XPAR_PSU_ADMA_0_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_ADMA_1 */ +#define XPAR_PSU_ADMA_1_DEVICE_ID 1 +#define XPAR_PSU_ADMA_1_BASEADDR 0xFFA90000 +#define XPAR_PSU_ADMA_1_DMA_MODE 1 +#define XPAR_PSU_ADMA_1_HIGHADDR 0xFFA9FFFF +#define XPAR_PSU_ADMA_1_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_ADMA_2 */ +#define XPAR_PSU_ADMA_2_DEVICE_ID 2 +#define XPAR_PSU_ADMA_2_BASEADDR 0xFFAA0000 +#define XPAR_PSU_ADMA_2_DMA_MODE 1 +#define XPAR_PSU_ADMA_2_HIGHADDR 0xFFAAFFFF +#define XPAR_PSU_ADMA_2_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_ADMA_3 */ +#define XPAR_PSU_ADMA_3_DEVICE_ID 3 +#define XPAR_PSU_ADMA_3_BASEADDR 0xFFAB0000 +#define XPAR_PSU_ADMA_3_DMA_MODE 1 +#define XPAR_PSU_ADMA_3_HIGHADDR 0xFFABFFFF +#define XPAR_PSU_ADMA_3_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_ADMA_4 */ +#define XPAR_PSU_ADMA_4_DEVICE_ID 4 +#define XPAR_PSU_ADMA_4_BASEADDR 0xFFAC0000 +#define XPAR_PSU_ADMA_4_DMA_MODE 1 +#define XPAR_PSU_ADMA_4_HIGHADDR 0xFFACFFFF +#define XPAR_PSU_ADMA_4_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_ADMA_5 */ +#define XPAR_PSU_ADMA_5_DEVICE_ID 5 +#define XPAR_PSU_ADMA_5_BASEADDR 0xFFAD0000 +#define XPAR_PSU_ADMA_5_DMA_MODE 1 +#define XPAR_PSU_ADMA_5_HIGHADDR 0xFFADFFFF +#define XPAR_PSU_ADMA_5_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_ADMA_6 */ +#define XPAR_PSU_ADMA_6_DEVICE_ID 6 +#define XPAR_PSU_ADMA_6_BASEADDR 0xFFAE0000 +#define XPAR_PSU_ADMA_6_DMA_MODE 1 +#define XPAR_PSU_ADMA_6_HIGHADDR 0xFFAEFFFF +#define XPAR_PSU_ADMA_6_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_ADMA_7 */ +#define XPAR_PSU_ADMA_7_DEVICE_ID 7 +#define XPAR_PSU_ADMA_7_BASEADDR 0xFFAF0000 +#define XPAR_PSU_ADMA_7_DMA_MODE 1 +#define XPAR_PSU_ADMA_7_HIGHADDR 0xFFAFFFFF +#define XPAR_PSU_ADMA_7_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_0 */ +#define XPAR_PSU_GDMA_0_DEVICE_ID 8 +#define XPAR_PSU_GDMA_0_BASEADDR 0xFD500000 +#define XPAR_PSU_GDMA_0_DMA_MODE 0 +#define XPAR_PSU_GDMA_0_HIGHADDR 0xFD50FFFF +#define XPAR_PSU_GDMA_0_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_1 */ +#define XPAR_PSU_GDMA_1_DEVICE_ID 9 +#define XPAR_PSU_GDMA_1_BASEADDR 0xFD510000 +#define XPAR_PSU_GDMA_1_DMA_MODE 0 +#define XPAR_PSU_GDMA_1_HIGHADDR 0xFD51FFFF +#define XPAR_PSU_GDMA_1_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_2 */ +#define XPAR_PSU_GDMA_2_DEVICE_ID 10 +#define XPAR_PSU_GDMA_2_BASEADDR 0xFD520000 +#define XPAR_PSU_GDMA_2_DMA_MODE 0 +#define XPAR_PSU_GDMA_2_HIGHADDR 0xFD52FFFF +#define XPAR_PSU_GDMA_2_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_3 */ +#define XPAR_PSU_GDMA_3_DEVICE_ID 11 +#define XPAR_PSU_GDMA_3_BASEADDR 0xFD530000 +#define XPAR_PSU_GDMA_3_DMA_MODE 0 +#define XPAR_PSU_GDMA_3_HIGHADDR 0xFD53FFFF +#define XPAR_PSU_GDMA_3_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_4 */ +#define XPAR_PSU_GDMA_4_DEVICE_ID 12 +#define XPAR_PSU_GDMA_4_BASEADDR 0xFD540000 +#define XPAR_PSU_GDMA_4_DMA_MODE 0 +#define XPAR_PSU_GDMA_4_HIGHADDR 0xFD54FFFF +#define XPAR_PSU_GDMA_4_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_5 */ +#define XPAR_PSU_GDMA_5_DEVICE_ID 13 +#define XPAR_PSU_GDMA_5_BASEADDR 0xFD550000 +#define XPAR_PSU_GDMA_5_DMA_MODE 0 +#define XPAR_PSU_GDMA_5_HIGHADDR 0xFD55FFFF +#define XPAR_PSU_GDMA_5_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_6 */ +#define XPAR_PSU_GDMA_6_DEVICE_ID 14 +#define XPAR_PSU_GDMA_6_BASEADDR 0xFD560000 +#define XPAR_PSU_GDMA_6_DMA_MODE 0 +#define XPAR_PSU_GDMA_6_HIGHADDR 0xFD56FFFF +#define XPAR_PSU_GDMA_6_ZDMA_CLK_FREQ_HZ 0 + + +/* Definitions for peripheral PSU_GDMA_7 */ +#define XPAR_PSU_GDMA_7_DEVICE_ID 15 +#define XPAR_PSU_GDMA_7_BASEADDR 0xFD570000 +#define XPAR_PSU_GDMA_7_DMA_MODE 0 +#define XPAR_PSU_GDMA_7_HIGHADDR 0xFD57FFFF +#define XPAR_PSU_GDMA_7_ZDMA_CLK_FREQ_HZ 0 + + +/******************************************************************/ + +/* Canonical definitions for peripheral PSU_ADMA_0 */ +#define XPAR_XZDMA_0_DEVICE_ID XPAR_PSU_ADMA_0_DEVICE_ID +#define XPAR_XZDMA_0_BASEADDR 0xFFA80000 +#define XPAR_XZDMA_0_DMA_MODE 1 +#define XPAR_XZDMA_0_HIGHADDR 0xFFA8FFFF +#define XPAR_XZDMA_0_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_ADMA_1 */ +#define XPAR_XZDMA_1_DEVICE_ID XPAR_PSU_ADMA_1_DEVICE_ID +#define XPAR_XZDMA_1_BASEADDR 0xFFA90000 +#define XPAR_XZDMA_1_DMA_MODE 1 +#define XPAR_XZDMA_1_HIGHADDR 0xFFA9FFFF +#define XPAR_XZDMA_1_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_ADMA_2 */ +#define XPAR_XZDMA_2_DEVICE_ID XPAR_PSU_ADMA_2_DEVICE_ID +#define XPAR_XZDMA_2_BASEADDR 0xFFAA0000 +#define XPAR_XZDMA_2_DMA_MODE 1 +#define XPAR_XZDMA_2_HIGHADDR 0xFFAAFFFF +#define XPAR_XZDMA_2_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_ADMA_3 */ +#define XPAR_XZDMA_3_DEVICE_ID XPAR_PSU_ADMA_3_DEVICE_ID +#define XPAR_XZDMA_3_BASEADDR 0xFFAB0000 +#define XPAR_XZDMA_3_DMA_MODE 1 +#define XPAR_XZDMA_3_HIGHADDR 0xFFABFFFF +#define XPAR_XZDMA_3_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_ADMA_4 */ +#define XPAR_XZDMA_4_DEVICE_ID XPAR_PSU_ADMA_4_DEVICE_ID +#define XPAR_XZDMA_4_BASEADDR 0xFFAC0000 +#define XPAR_XZDMA_4_DMA_MODE 1 +#define XPAR_XZDMA_4_HIGHADDR 0xFFACFFFF +#define XPAR_XZDMA_4_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_ADMA_5 */ +#define XPAR_XZDMA_5_DEVICE_ID XPAR_PSU_ADMA_5_DEVICE_ID +#define XPAR_XZDMA_5_BASEADDR 0xFFAD0000 +#define XPAR_XZDMA_5_DMA_MODE 1 +#define XPAR_XZDMA_5_HIGHADDR 0xFFADFFFF +#define XPAR_XZDMA_5_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_ADMA_6 */ +#define XPAR_XZDMA_6_DEVICE_ID XPAR_PSU_ADMA_6_DEVICE_ID +#define XPAR_XZDMA_6_BASEADDR 0xFFAE0000 +#define XPAR_XZDMA_6_DMA_MODE 1 +#define XPAR_XZDMA_6_HIGHADDR 0xFFAEFFFF +#define XPAR_XZDMA_6_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_ADMA_7 */ +#define XPAR_XZDMA_7_DEVICE_ID XPAR_PSU_ADMA_7_DEVICE_ID +#define XPAR_XZDMA_7_BASEADDR 0xFFAF0000 +#define XPAR_XZDMA_7_DMA_MODE 1 +#define XPAR_XZDMA_7_HIGHADDR 0xFFAFFFFF +#define XPAR_XZDMA_7_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_0 */ +#define XPAR_XZDMA_8_DEVICE_ID XPAR_PSU_GDMA_0_DEVICE_ID +#define XPAR_XZDMA_8_BASEADDR 0xFD500000 +#define XPAR_XZDMA_8_DMA_MODE 0 +#define XPAR_XZDMA_8_HIGHADDR 0xFD50FFFF +#define XPAR_XZDMA_8_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_1 */ +#define XPAR_XZDMA_9_DEVICE_ID XPAR_PSU_GDMA_1_DEVICE_ID +#define XPAR_XZDMA_9_BASEADDR 0xFD510000 +#define XPAR_XZDMA_9_DMA_MODE 0 +#define XPAR_XZDMA_9_HIGHADDR 0xFD51FFFF +#define XPAR_XZDMA_9_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_2 */ +#define XPAR_XZDMA_10_DEVICE_ID XPAR_PSU_GDMA_2_DEVICE_ID +#define XPAR_XZDMA_10_BASEADDR 0xFD520000 +#define XPAR_XZDMA_10_DMA_MODE 0 +#define XPAR_XZDMA_10_HIGHADDR 0xFD52FFFF +#define XPAR_XZDMA_10_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_3 */ +#define XPAR_XZDMA_11_DEVICE_ID XPAR_PSU_GDMA_3_DEVICE_ID +#define XPAR_XZDMA_11_BASEADDR 0xFD530000 +#define XPAR_XZDMA_11_DMA_MODE 0 +#define XPAR_XZDMA_11_HIGHADDR 0xFD53FFFF +#define XPAR_XZDMA_11_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_4 */ +#define XPAR_XZDMA_12_DEVICE_ID XPAR_PSU_GDMA_4_DEVICE_ID +#define XPAR_XZDMA_12_BASEADDR 0xFD540000 +#define XPAR_XZDMA_12_DMA_MODE 0 +#define XPAR_XZDMA_12_HIGHADDR 0xFD54FFFF +#define XPAR_XZDMA_12_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_5 */ +#define XPAR_XZDMA_13_DEVICE_ID XPAR_PSU_GDMA_5_DEVICE_ID +#define XPAR_XZDMA_13_BASEADDR 0xFD550000 +#define XPAR_XZDMA_13_DMA_MODE 0 +#define XPAR_XZDMA_13_HIGHADDR 0xFD55FFFF +#define XPAR_XZDMA_13_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_6 */ +#define XPAR_XZDMA_14_DEVICE_ID XPAR_PSU_GDMA_6_DEVICE_ID +#define XPAR_XZDMA_14_BASEADDR 0xFD560000 +#define XPAR_XZDMA_14_DMA_MODE 0 +#define XPAR_XZDMA_14_HIGHADDR 0xFD56FFFF +#define XPAR_XZDMA_14_ZDMA_CLK_FREQ_HZ 0 + +/* Canonical definitions for peripheral PSU_GDMA_7 */ +#define XPAR_XZDMA_15_DEVICE_ID XPAR_PSU_GDMA_7_DEVICE_ID +#define XPAR_XZDMA_15_BASEADDR 0xFD570000 +#define XPAR_XZDMA_15_DMA_MODE 0 +#define XPAR_XZDMA_15_HIGHADDR 0xFD57FFFF +#define XPAR_XZDMA_15_ZDMA_CLK_FREQ_HZ 0 + + +/******************************************************************/ + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/Makefile new file mode 100644 index 000000000..926b20c4e --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/Makefile @@ -0,0 +1,27 @@ +COMPILER= +ARCHIVER= +CP=cp +COMPILER_FLAGS= +EXTRA_COMPILER_FLAGS= +LIB=libxil.a + +RELEASEDIR=../../../lib +INCLUDEDIR=../../../include +INCLUDES=-I./. -I${INCLUDEDIR} + +INCLUDEFILES=*.h +LIBSOURCES=*.c +OUTS = *.o + + +libs: + echo "Compiling axipmon" + $(COMPILER) $(COMPILER_FLAGS) $(EXTRA_COMPILER_FLAGS) $(INCLUDES) $(LIBSOURCES) + $(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OUTS} + make clean + +include: + ${CP} ${INCLUDEFILES} ${INCLUDEDIR} + +clean: + rm -rf ${OUTS} diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon.c new file mode 100644 index 000000000..fbb867839 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon.c @@ -0,0 +1,2123 @@ +/****************************************************************************** +* +* Copyright (C) 2012 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/****************************************************************************/ +/** +* +* @file xaxipmon.c +* @addtogroup axipmon_v6_3 +* @{ +* +* This file contains the driver API functions that can be used to access +* the AXI Performance Monitor device. +* +* Refer to the xaxipmon.h header file for more information about this driver. +* +* @note None. +* +* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- -----  -------- -----------------------------------------------------
+* 1.00a bss   02/27/12  First release
+* 2.00a bss   06/23/12  Updated to support v2_00a version of IP.
+* 3.00a bss   09/03/12  Deleted XAxiPmon_SetAgent, XAxiPmon_GetAgent APIs and
+*			modified XAxiPmon_SetMetrics, XAxiPmon_GetMetrics APIs
+*			to support v2_01a version of IP.
+* 3.01a bss   10/25/12  Added XAxiPmon_StartCounters and XAxiPmon_StopCounters
+*			APIs (CR #683799).
+*			Added XAxiPmon_StartEventLog and XAxiPmon_StopEventLog
+*			APIs (CR #683801).
+*			Added XAxiPmon_GetMetricName API (CR #683803).
+*			Modified XAxiPmon_SetMetrics and XAxiPmon_GetMetrics
+*			(CR #683746)
+*			Added XAxiPmon_EnableEventLog,
+*			XAxiPmon_DisableMetricsCounter,
+*			XAxiPmon_EnableMetricsCounter APIs to replace macros.
+*			Added XAxiPmon_SetMetricCounterCutOff,
+*			XAxiPmon_GetMetricCounterCutOff,
+*			XAxiPmon_EnableExternalTrigger and
+*			XAxiPmon_DisableExternalTrigger APIs to support new
+*			version of IP.
+* 4.00a bss   01/17/13  To support new version of IP:
+* 			Added XAxiPmon_SetLogEnableRanges,
+*	  		XAxiPmon_GetLogEnableRanges,
+*			XAxiPmon_EnableMetricCounterTrigger,
+*			XAxiPmon_DisableMetricCounterTrigger,
+*			XAxiPmon_EnableEventLogTrigger,
+*			XAxiPmon_DisableEventLogTrigger,
+*			XAxiPmon_SetWriteLatencyId,
+*			XAxiPmon_SetReadLatencyId,
+*			XAxiPmon_GetWriteLatencyId,
+*			XAxiPmon_GetReadLatencyId APIs and removed
+*			XAxiPmon_SetMetricCounterCutOff,
+*			XAxiPmon_GetMetricCounterCutOff,
+*			XAxiPmon_EnableExternalTrigger and
+*			XAxiPmon_DisableExternalTrigger APIs
+* 5.00a bss   08/26/13  To support new version of IP:
+*			Modified XAxiPmon_CfgInitialize to add Mode of APM and
+*			ScaleFactor parameter.
+*			Modified Assert functions depending on Mode.
+*			Modified XAxiPmon_GetMetricCounter and
+*			XAxiPmon_GetSampledMetricCounter to include
+*			new Counters.
+*			Modified XAxiPmon_SetSampleInterval and
+*			XAxiPmon_GetSampleInterval to remove higher 32 bit
+*			value of SampleInterval since Sample Interval Register
+*			is only 32 bit.
+*			Added XAxiPmon_SetWrLatencyStart,
+*			XAxiPmon_SetWrLatencyEnd, XAxiPmon_SetRdLatencyStart
+*			XAxiPmon_SetRdLatencyEnd, XAxiPmon_GetWrLatencyStart,
+*			XAxiPmon_GetWrLatencyEnd, XAxiPmon_GetRdLatencyStart,
+*			XAxiPmon_GetRdLatencyEnd, XAxiPmon_SetWriteIdMask,
+*			XAxiPmon_SetReadIdMask,
+*			XAxiPmon_GetWriteIdMask and
+*			XAxiPmon_GetReadIdMask APIs.
+*			Renamed:
+*			XAxiPmon_SetWriteLatencyId to XAxiPmon_SetWriteId
+*			XAxiPmon_SetReadLatencyId to XAxiPmon_SetReadId
+*			XAxiPmon_GetWriteLatencyId to XAxiPmon_GetWriteId
+*			XAxiPmon_SetReadLatencyId to XAxiPmon_GetReadId.
+* 6.2   bss  04/21/14   Updated XAxiPmon_CfgInitialize to Reset counters
+*			and FIFOs based on Modes(CR#782671). And if both
+*			profile and trace modes are present set mode as
+*			Advanced.
+* 6.2	bss  03/02/15	Updated XAxiPmon_SetWriteId, XAxiPmon_SetReadId,
+*						XAxiPmon_GetWriteId, XAxiPmon_GetReadId
+*						XAxiPmon_SetWriteIdMask, XAxiPmon_SetReadIdMask,
+*						XAxiPmon_GetWriteIdMask, XAxiPmon_GetReadIdMask
+*						functions to support Zynq MP APM.
+* 6.3	kvn  07/02/15	Modified code according to MISRA-C:2012 guidelines.
+* 6.4   sk   11/10/15 Used UINTPTR instead of u32 for Baseaddress CR# 867425.
+*                     Changed the prototype of XAxiPmon_CfgInitialize API.
+*
+* +*****************************************************************************/ + +/***************************** Include Files ********************************/ + +#include "xaxipmon.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +/************************** Variable Definitions *****************************/ + +/*****************************************************************************/ +/** +* +* This function initializes a specific XAxiPmon device/instance. This function +* must be called prior to using the AXI Performance Monitor device. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param ConfigPtr points to the XAxiPmon device configuration structure. +* @param EffectiveAddr is the device base address in the virtual memory +* address space. If the address translation is not used then the +* physical address is passed. +* Unexpected errors may occur if the address mapping is changed +* after this function is invoked. +* +* @return +* - XST_SUCCESS if successful. +* +* @note The user needs to first call the XAxiPmon_LookupConfig() API +* which returns the Configuration structure pointer which is +* passed as a parameter to the XAxiPmon_CfgInitialize() API. +* +******************************************************************************/ +s32 XAxiPmon_CfgInitialize(XAxiPmon *InstancePtr, XAxiPmon_Config *ConfigPtr, + UINTPTR EffectiveAddr) +{ + /* + * Assert the input arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(ConfigPtr != NULL); + + /* + * Set the values read from the device config and the base address. + */ + InstancePtr->Config.DeviceId = ConfigPtr->DeviceId; + InstancePtr->Config.BaseAddress = EffectiveAddr; + InstancePtr->Config.GlobalClkCounterWidth = + ConfigPtr->GlobalClkCounterWidth; + InstancePtr->Config.MetricSampleCounterWidth = + ConfigPtr->MetricSampleCounterWidth; + InstancePtr->Config.IsEventCount = + ConfigPtr->IsEventCount; + InstancePtr->Config.NumberofSlots = + ConfigPtr->NumberofSlots; + InstancePtr->Config.NumberofCounters = + ConfigPtr->NumberofCounters; + InstancePtr->Config.HaveSampledCounters = + ConfigPtr->HaveSampledCounters; + InstancePtr->Config.IsEventLog = + ConfigPtr->IsEventLog; + InstancePtr->Config.FifoDepth = + ConfigPtr->FifoDepth; + InstancePtr->Config.FifoWidth = + ConfigPtr->FifoWidth; + InstancePtr->Config.TidWidth = + ConfigPtr->TidWidth; + InstancePtr->Config.Is32BitFiltering = ConfigPtr->Is32BitFiltering; + + InstancePtr->Config.ScaleFactor = ConfigPtr->ScaleFactor; + + if ((ConfigPtr->ModeProfile == ConfigPtr->ModeTrace) + || (ConfigPtr->ModeAdvanced == 1U)) + { + InstancePtr->Mode = XAPM_MODE_ADVANCED; + } else if (ConfigPtr->ModeTrace == 1U) { + InstancePtr->Mode = XAPM_MODE_TRACE; + } else { + InstancePtr->Mode = XAPM_MODE_PROFILE; + } + + /* + * Indicate the instance is now ready to use, initialized without error. + */ + InstancePtr->IsReady = XIL_COMPONENT_IS_READY; + + /* + * Reset the Counters and FIFO based on Modes. + */ + + /* Advanced and Profile */ + if((InstancePtr->Mode == XAPM_MODE_ADVANCED) || + (InstancePtr->Mode == XAPM_MODE_PROFILE)) + { + (void)XAxiPmon_ResetMetricCounter(InstancePtr); + } + /* Advanced */ + if(InstancePtr->Mode == XAPM_MODE_ADVANCED) + { + XAxiPmon_ResetGlobalClkCounter(InstancePtr); + } + /* Advanced and Trace */ + if((InstancePtr->Mode == XAPM_MODE_ADVANCED) || + (InstancePtr->Mode == XAPM_MODE_TRACE)) + { + (void)XAxiPmon_ResetFifo(InstancePtr); + } + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* This function resets all Metric Counters and Sampled Metric Counters of +* AXI Performance Monitor. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return XST_SUCCESS +* +* +* @note None. +* +******************************************************************************/ +s32 XAxiPmon_ResetMetricCounter(XAxiPmon *InstancePtr) +{ + + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(InstancePtr->Mode != XAPM_MODE_TRACE); + + /* + * Write the reset value to the Control register to reset + * Metric counters + */ + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + (RegValue | XAPM_CR_MCNTR_RESET_MASK)); + /* + * Release from Reset + */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + (RegValue & ~(XAPM_CR_MCNTR_RESET_MASK))); + return XST_SUCCESS; + +} + +/*****************************************************************************/ +/** +* +* This function resets Global Clock Counter of AXI Performance Monitor +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XAxiPmon_ResetGlobalClkCounter(XAxiPmon *InstancePtr) +{ + + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode == XAPM_MODE_ADVANCED); + + /* + * Write the reset value to the Control register to reset + * Global Clock Counter + */ + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + (RegValue | XAPM_CR_GCC_RESET_MASK)); + + /* + * Release from Reset + */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + (RegValue & ~(XAPM_CR_GCC_RESET_MASK))); + +} + +/*****************************************************************************/ +/** +* +* This function resets Streaming FIFO of AXI Performance Monitor +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return XST_SUCCESS +* +* @note None. +* +******************************************************************************/ +s32 XAxiPmon_ResetFifo(XAxiPmon *InstancePtr) +{ + + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(InstancePtr->Mode != XAPM_MODE_PROFILE); + + /* Check Event Logging is enabled in Hardware */ + if((InstancePtr->Config.IsEventLog == 0U) && + (InstancePtr->Mode == XAPM_MODE_ADVANCED)) + { + /*Event logging not enabled in Hardware*/ + return XST_SUCCESS; + } + /* + * Write the reset value to the Control register to reset + * FIFO + */ + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + (RegValue | XAPM_CR_FIFO_RESET_MASK)); + /* + * Release from Reset + */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + (RegValue & ~(XAPM_CR_FIFO_RESET_MASK))); + + return XST_SUCCESS; + +} + +/****************************************************************************/ +/** +* +* This function sets Ranges for Incrementers depending on parameters passed. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param IncrementerNum specifies the Incrementer for which Ranges +* need to be set +* @param RangeUpper specifies the Upper limit in 32 bit Register +* @param RangeLower specifies the Lower limit in 32 bit Register +* +* @return None. +* +* @note None +* +*****************************************************************************/ +void XAxiPmon_SetIncrementerRange(XAxiPmon *InstancePtr, u8 IncrementerNum, + u16 RangeUpper, u16 RangeLower) + { + + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode == XAPM_MODE_ADVANCED); + Xil_AssertVoid(IncrementerNum < XAPM_MAX_COUNTERS); + + /* + * Write to the specified Range register + */ + RegValue = (u32)RangeUpper << 16; + RegValue |= RangeLower; + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_RANGE0_OFFSET + ((u32)IncrementerNum * (u32)16)), + RegValue); + } + +/****************************************************************************/ +/** +* +* This function returns the Ranges of Incrementers Registers. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param IncrementerNum specifies the Incrementer for which Ranges +* need to be returned. +* @param RangeUpper specifies the user reference variable which returns +* the Upper Range Value of the specified Incrementer. +* @param RangeLower specifies the user reference variable which returns +* the Lower Range Value of the specified Incrementer. +* +* @return None. +* +* @note None +* +*****************************************************************************/ +void XAxiPmon_GetIncrementerRange(XAxiPmon *InstancePtr, u8 IncrementerNum, + u16 *RangeUpper, u16 *RangeLower) + { + + u32 RegValue; + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode == XAPM_MODE_ADVANCED); + Xil_AssertVoid(IncrementerNum < XAPM_MAX_COUNTERS); + + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_RANGE0_OFFSET + ((u32)IncrementerNum * (u32)16))); + + *RangeLower = (u16)(RegValue & 0x0000FFFFU); + *RangeUpper = (u16)((RegValue >> 16) & 0x0000FFFFU); + } + +/****************************************************************************/ +/** +* +* This function sets the Sample Interval Register +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param SampleInterval is the Sample Interval value to be set +* +* @return None +* +* @note None. +* +*****************************************************************************/ +void XAxiPmon_SetSampleInterval(XAxiPmon *InstancePtr, u32 SampleInterval) +{ + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode != XAPM_MODE_TRACE); + + /* + * Set Sample Interval Lower + */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_SI_LOW_OFFSET, SampleInterval); + +} + +/****************************************************************************/ +/** +* +* This function returns the contents of Sample Interval Register +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param SampleInterval is a pointer where the Sample Interval +* Counter value is returned. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XAxiPmon_GetSampleInterval(XAxiPmon *InstancePtr, u32 *SampleInterval) +{ + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode != XAPM_MODE_TRACE); + + /* + * Set Sample Interval Lower + */ + *SampleInterval = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_SI_LOW_OFFSET); + +} + +/****************************************************************************/ +/** +* +* This function sets Metrics for specified Counter in the corresponding +* Metric Selector Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Slot is the slot ID for which specified counter has to +* be connected. +* @param Metrics is one of the Metric Sets. User has to use +* XAPM_METRIC_SET_* macros in xaxipmon.h for this parameter +* @param CounterNum is the Counter Number. +* The valid values are 0 to 9. +* +* @return XST_SUCCESS if Success +* XST_FAILURE if Failure +* +* @note None. +* +*****************************************************************************/ +s32 XAxiPmon_SetMetrics(XAxiPmon *InstancePtr, u8 Slot, u8 Metrics, + u8 CounterNum) +{ + u32 RegValue; + u32 Mask; + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(InstancePtr->Mode == XAPM_MODE_ADVANCED); + Xil_AssertNonvoid(Slot < XAPM_MAX_AGENTS); + Xil_AssertNonvoid((Metrics <= XAPM_METRIC_SET_22) || + (Metrics == XAPM_METRIC_SET_30)); + Xil_AssertNonvoid(CounterNum < XAPM_MAX_COUNTERS); + + /* Find Mask value to force zero in counternum byte range */ + if ((CounterNum == 0U) || (CounterNum == 4U) || (CounterNum == 8U)) { + Mask = 0xFFFFFF00U; + } + else if ((CounterNum == 1U) || (CounterNum == 5U) || (CounterNum == 9U)) { + Mask = 0xFFFF00FFU; + } + else if ((CounterNum == 2U) || (CounterNum == 6U)) { + Mask = 0xFF00FFFFU; + } + else { + Mask = 0x00FFFFFFU; + } + + if(CounterNum <= 3U) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_MSR0_OFFSET); + + RegValue = RegValue & Mask; + RegValue = RegValue | ((u32)Metrics << (CounterNum * (u8)8)); + RegValue = RegValue | ((u32)Slot << ((CounterNum * (u8)8) + (u8)5)); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_MSR0_OFFSET,RegValue); + } + else if((CounterNum >= 4U) && (CounterNum <= 7U)) { + CounterNum = CounterNum - 4U; + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_MSR1_OFFSET); + + RegValue = RegValue & Mask; + RegValue = RegValue | ((u32)Metrics << (CounterNum * (u8)8)); + RegValue = RegValue | ((u32)Slot << ((CounterNum * (u8)8) + (u8)5)); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_MSR1_OFFSET,RegValue); + } + else { + CounterNum = CounterNum - 8U; + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_MSR2_OFFSET); + + RegValue = RegValue & Mask; + RegValue = RegValue | ((u32)Metrics << (CounterNum * (u8)8)); + RegValue = RegValue | ((u32)Slot << ((CounterNum * (u8)8) + (u8)5)); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_MSR2_OFFSET,RegValue); + } + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* This function returns Metrics in the specified Counter from the corresponding +* Metric Selector Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param CounterNum is the Counter Number. +* The valid values are 0 to 9. +* @param Metrics is a reference parameter from application where metrics +* of specified counter is filled. +* @praram Slot is a reference parameter in which slot Id of +* specified counter is filled +* @return XST_SUCCESS if Success +* XST_FAILURE if Failure +* +* @note None. +* +*****************************************************************************/ +s32 XAxiPmon_GetMetrics(XAxiPmon *InstancePtr, u8 CounterNum, u8 *Metrics, + u8 *Slot) +{ + u32 RegValue; + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(InstancePtr->Mode == XAPM_MODE_ADVANCED); + Xil_AssertNonvoid(CounterNum <= XAPM_MAX_COUNTERS); + + if(CounterNum <= 3U) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_MSR0_OFFSET); + *Metrics = (u8)(RegValue >> (CounterNum * (u8)8)) & 0x1FU; + *Slot = (u8)(RegValue >> ((CounterNum * (u8)8) + (u8)5)) & 0x07U; + + } + else if((CounterNum >= 4U) && (CounterNum <= 7U)) { + CounterNum = CounterNum - 4U; + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_MSR1_OFFSET); + *Metrics = (u8)(RegValue >> (CounterNum * (u8)8)) & 0x1FU; + *Slot = (u8)(RegValue >> ((CounterNum * (u8)8) + (u8)5)) & 0x07U; + } + else { + CounterNum = CounterNum - 8U; + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_MSR2_OFFSET); + *Metrics = (u8)(RegValue >> (CounterNum * (u8)8)) & 0x1FU; + *Slot = (u8)(RegValue >> ((CounterNum * (u8)8) + (u8)5)) & 0x07U; + } + return XST_SUCCESS; +} + +/****************************************************************************/ +/** +* +* This function returns the contents of the Global Clock Counter Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param CntHighValue is the user space pointer with which upper 32 bits +* of Global Clock Counter has to be filled +* @param CntLowValue is the user space pointer with which lower 32 bits +* of Global Clock Counter has to be filled +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +void XAxiPmon_GetGlobalClkCounter(XAxiPmon *InstancePtr,u32 *CntHighValue, + u32 *CntLowValue) +{ + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode == XAPM_MODE_ADVANCED); + + *CntHighValue = 0x0U; + *CntLowValue = 0x0U; + + /* + * If Counter width is 64 bit then Counter Value has to be + * filled at CntHighValue address also. + */ + if(InstancePtr->Config.GlobalClkCounterWidth == 64) { + + /* Bits[63:32] exists at XAPM_GCC_HIGH_OFFSET */ + *CntHighValue = XAxiPmon_ReadReg(InstancePtr-> + Config.BaseAddress, XAPM_GCC_HIGH_OFFSET); + } + /* Bits[31:0] exists at XAPM_GCC_LOW_OFFSET */ + *CntLowValue = XAxiPmon_ReadReg(InstancePtr-> + Config.BaseAddress, XAPM_GCC_LOW_OFFSET); +} + +/****************************************************************************/ +/** +* +* This function returns the contents of the Metric Counter Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param CounterNum is the number of the Metric Counter to be read. +* Use the XAPM_METRIC_COUNTER* defines for the counter number in +* xaxipmon.h. The valid values are 0 (XAPM_METRIC_COUNTER_0) to +* 47(XAPM_METRIC_COUNTER_47). +* @return RegValue is the content of specified Metric Counter. +* +* @note None. +* +*****************************************************************************/ +u32 XAxiPmon_GetMetricCounter(XAxiPmon *InstancePtr, u32 CounterNum) +{ + + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(InstancePtr->Mode != XAPM_MODE_TRACE); + Xil_AssertNonvoid(CounterNum < XAPM_MAX_COUNTERS_PROFILE); + + if (CounterNum < 10U ) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_MC0_OFFSET + (CounterNum * (u32)16))); + } + else if ((CounterNum >= 10U) && (CounterNum < 12U)) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_MC10_OFFSET + ((CounterNum - (u32)10) * (u32)16))); + } + else if ((CounterNum >= 12U) && (CounterNum < 24U)) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_MC12_OFFSET + ((CounterNum - (u32)12) * (u32)16))); + } + else if ((CounterNum >= 24U) && (CounterNum < 36U)) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_MC24_OFFSET + ((CounterNum - (u32)24) * (u32)16))); + } + else { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_MC36_OFFSET + ((CounterNum - (u32)36) * (u32)16))); + } + + return RegValue; +} + +/****************************************************************************/ +/** +* +* This function returns the contents of the Sampled Metric Counter Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param CounterNum is the number of the Sampled Metric Counter to read. +* Use the XAPM_METRIC_COUNTER* defines for the counter number in +* xaxipmon.h. The valid values are 0 (XAPM_METRIC_COUNTER_0) to +* 47(XAPM_METRIC_COUNTER_47). +* +* @return RegValue is the content of specified Sampled Metric Counter. +* +* @note None. +* +*****************************************************************************/ +u32 XAxiPmon_GetSampledMetricCounter(XAxiPmon *InstancePtr, u32 CounterNum) +{ + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(InstancePtr->Mode != XAPM_MODE_TRACE); + Xil_AssertNonvoid(CounterNum < XAPM_MAX_COUNTERS_PROFILE); + Xil_AssertNonvoid((InstancePtr->Mode == XAPM_MODE_PROFILE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.HaveSampledCounters == 1U))); + + if (CounterNum < 10U ) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_SMC0_OFFSET + (CounterNum * (u32)16))); + } + else if ((CounterNum >= 10U) && (CounterNum < 12U)) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_SMC10_OFFSET + ((CounterNum - (u32)10) * (u32)16))); + } + else if ((CounterNum >= 12U) && (CounterNum < 24U)) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_SMC12_OFFSET + ((CounterNum - (u32)12) * (u32)16))); + } + else if ((CounterNum >= 24U) && (CounterNum < 36U)) { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_SMC24_OFFSET + ((CounterNum - (u32)24) * (u32)16))); + } + else { + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_SMC36_OFFSET + ((CounterNum - (u32)36) * (u32)16))); + } + + return RegValue; +} + +/****************************************************************************/ +/** +* +* This function returns the contents of the Incrementer Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param IncrementerNum is the number of the Incrementer register to +* read.Use the XAPM_INCREMENTER_* defines for the Incrementer +* number.The valid values are 0 (XAPM_INCREMENTER_0) to +* 9 (XAPM_INCREMENTER_9). +* @param IncrementerNum is the number of the specified Incrementer +* register +* @return RegValue is content of specified Metric Incrementer register. +* +* @note None. +* +*****************************************************************************/ +u32 XAxiPmon_GetIncrementer(XAxiPmon *InstancePtr, u32 IncrementerNum) +{ + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U)); + Xil_AssertNonvoid(IncrementerNum < XAPM_MAX_COUNTERS); + + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_INC0_OFFSET + (IncrementerNum * (u32)16))); + + return RegValue; +} + +/****************************************************************************/ +/** +* +* This function returns the contents of the Sampled Incrementer Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param IncrementerNum is the number of the Sampled Incrementer +* register to read.Use the XAPM_INCREMENTER_* defines for the +* Incrementer number.The valid values are 0 (XAPM_INCREMENTER_0) +* to 9 (XAPM_INCREMENTER_9). +* @param IncrementerNum is the number of the specified Sampled +* Incrementer register +* @return RegValue is content of specified Sampled Incrementer register. +* +* @note None. +* +*****************************************************************************/ +u32 XAxiPmon_GetSampledIncrementer(XAxiPmon *InstancePtr, u32 IncrementerNum) +{ + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U) && + (InstancePtr->Config.HaveSampledCounters == 1U)); + Xil_AssertNonvoid(IncrementerNum < XAPM_MAX_COUNTERS); + + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_SINC0_OFFSET + (IncrementerNum * (u32)16))); + return RegValue; +} + +/****************************************************************************/ +/** +* +* This function sets Software-written Data Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param SwData is the Software written Data. +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +void XAxiPmon_SetSwDataReg(XAxiPmon *InstancePtr, u32 SwData) +{ + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + /* + * Set Software-written Data Register + */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, (u32)XAPM_SWD_OFFSET, + SwData); +} + +/****************************************************************************/ +/** +* +* This function returns contents of Software-written Data Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return SwData. +* +* @note None. +* +*****************************************************************************/ +u32 XAxiPmon_GetSwDataReg(XAxiPmon *InstancePtr) +{ + u32 SwData; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + /* + * Set Metric Selector Register + */ + SwData = (u32)XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_SWD_OFFSET); + return SwData; +} + +/*****************************************************************************/ +/** +* +* This function enables the following in the AXI Performance Monitor: +* - Event logging +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param FlagEnables is a value to write to the flag enables +* register defined by XAPM_FEC_OFFSET. It is recommended +* to use the XAPM_FEC_*_MASK mask bits to generate. +* A value of 0x0 will disable all events to the event +* log streaming FIFO. +* +* @return XST_SUCCESS +* +* @note None +* +******************************************************************************/ +s32 XAxiPmon_StartEventLog(XAxiPmon *InstancePtr, u32 FlagEnables) +{ + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid((InstancePtr->Mode == XAPM_MODE_TRACE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventLog == 1U))); + + /* Read current register value */ + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + /* Flag Enable register is present only in Advanced Mode */ + if(InstancePtr->Mode == XAPM_MODE_ADVANCED) + { + /* Now write to flag enables register */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_FEC_OFFSET, FlagEnables); + } + + /* Write the new value to the Control register to + * enable event logging */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, (u32)XAPM_CTL_OFFSET, + RegValue | XAPM_CR_EVENTLOG_ENABLE_MASK); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* This function disables the following in the AXI Performance Monitor: +* - Event logging +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return XST_SUCCESS +* +* @note None +* +******************************************************************************/ +s32 XAxiPmon_StopEventLog(XAxiPmon *InstancePtr) +{ + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid((InstancePtr->Mode == XAPM_MODE_TRACE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventLog == 1U))); + + /* Read current register value */ + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + + /* Write the new value to the Control register to disable + * event logging */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, (u32)XAPM_CTL_OFFSET, + RegValue & ~XAPM_CR_EVENTLOG_ENABLE_MASK); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* This function enables the following in the AXI Performance Monitor: +* - Global clock counter +* - All metric counters +* - All sampled metric counters +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* SampleInterval is the sample interval for the sampled metric +* counters +* +* @return XST_SUCCESS +* +* @note None +******************************************************************************/ +s32 XAxiPmon_StartCounters(XAxiPmon *InstancePtr, u32 SampleInterval) +{ + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid((InstancePtr->Mode == XAPM_MODE_PROFILE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U))); + + /* Read current register value */ + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + /* Globlal Clock Counter is present in Advanced mode only */ + if(InstancePtr->Mode == XAPM_MODE_ADVANCED) + { + RegValue = RegValue | XAPM_CR_GCC_ENABLE_MASK; + } + + /* + * Write the new value to the Control register to enable + * global clock counter and metric counters + */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, (u32)XAPM_CTL_OFFSET, + RegValue | XAPM_CR_MCNTR_ENABLE_MASK); + + /* Set, enable, and load sampled counters */ + XAxiPmon_SetSampleInterval(InstancePtr, SampleInterval); + XAxiPmon_LoadSampleIntervalCounter(InstancePtr); + XAxiPmon_EnableSampleIntervalCounter(InstancePtr); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* This function disables the following in the AXI Performance Monitor: +* - Global clock counter +* - All metric counters +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return XST_SUCCESS +* +* @note None +* +******************************************************************************/ +s32 XAxiPmon_StopCounters(XAxiPmon *InstancePtr) +{ + u32 RegValue; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid((InstancePtr->Mode == XAPM_MODE_PROFILE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U))); + + /* Read current register value */ + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + /* Globlal Clock Counter is present in Advanced mode only */ + if(InstancePtr->Mode == XAPM_MODE_ADVANCED) + { + RegValue = RegValue & ~XAPM_CR_GCC_ENABLE_MASK; + } + + /* + * Write the new value to the Control register to disable + * global clock counter and metric counters + */ + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, (u32)XAPM_CTL_OFFSET, + RegValue & ~XAPM_CR_MCNTR_ENABLE_MASK); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* This function enables Metric Counters. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note None +* +*******************************************************************************/ +void XAxiPmon_EnableMetricsCounter(XAxiPmon *InstancePtr) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid((InstancePtr->Mode == XAPM_MODE_PROFILE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U))); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + RegVal | XAPM_CR_MCNTR_ENABLE_MASK); +} +/****************************************************************************/ +/** +* +* This function disables the Metric Counters. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note None +* +*****************************************************************************/ +void XAxiPmon_DisableMetricsCounter(XAxiPmon *InstancePtr) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid((InstancePtr->Mode == XAPM_MODE_PROFILE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U))); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, (u32)XAPM_CTL_OFFSET, + RegVal & ~(XAPM_CR_MCNTR_ENABLE_MASK)); +} + +/****************************************************************************/ +/** +* +* This function sets the Upper and Lower Ranges for specified Metric Counter +* Log Enable Register.Event Logging starts when corresponding Metric Counter +* value falls in between these ranges +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param CounterNum is the Metric Counter number for which +* Ranges are to be assigned.Use the XAPM_METRIC_COUNTER* +* defines for the counter number in xaxipmon.h. +* The valid values are 0 (XAPM_METRIC_COUNTER_0) to +* 9 (XAPM_METRIC_COUNTER_9). +* @param RangeUpper specifies the Upper limit in 32 bit Register +* @param RangeLower specifies the Lower limit in 32 bit Register +* @return None +* +* @note None. +* +*****************************************************************************/ +void XAxiPmon_SetLogEnableRanges(XAxiPmon *InstancePtr, u32 CounterNum, + u16 RangeUpper, u16 RangeLower) +{ + u32 RegValue; + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(CounterNum < XAPM_MAX_COUNTERS); + Xil_AssertVoid((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U)); + + + /* + * Write the specified Ranges to corresponding Metric Counter Log + * Enable Register + */ + RegValue = (u32)RangeUpper << 16; + RegValue |= RangeLower; + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_MC0LOGEN_OFFSET + (CounterNum * (u32)16)), RegValue); + +} + +/****************************************************************************/ +/** +* +* This function returns the Ranges of specified Metric Counter Log +* Enable Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param CounterNum is the Metric Counter number for which +* Ranges are to be returned.Use the XAPM_METRIC_COUNTER* +* defines for the counter number in xaxipmon.h. +* The valid values are 0 (XAPM_METRIC_COUNTER_0) to +* 9 (XAPM_METRIC_COUNTER_9). +* +* @param RangeUpper specifies the user reference variable which returns +* the Upper Range Value of the specified Metric Counter +* Log Enable Register. +* @param RangeLower specifies the user reference variable which returns +* the Lower Range Value of the specified Metric Counter +* Log Enable Register. +* +* @note None. +* +*****************************************************************************/ +void XAxiPmon_GetLogEnableRanges(XAxiPmon *InstancePtr, u32 CounterNum, + u16 *RangeUpper, u16 *RangeLower) +{ + u32 RegValue; + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(CounterNum < XAPM_MAX_COUNTERS); + Xil_AssertVoid((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventCount == 1U)); + + + RegValue = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)XAPM_MC0LOGEN_OFFSET + (CounterNum * (u32)16))); + + *RangeLower = (u16)RegValue & 0xFFFFU; + *RangeUpper = (u16)(RegValue >> 16) & 0xFFFFU; +} + +/*****************************************************************************/ +/** +* +* This function enables Event Logging. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note None +* +*******************************************************************************/ +void XAxiPmon_EnableEventLog(XAxiPmon *InstancePtr) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid((InstancePtr->Mode == XAPM_MODE_TRACE) || + ((InstancePtr->Mode == XAPM_MODE_ADVANCED) && + (InstancePtr->Config.IsEventLog == 1U))); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + RegVal | XAPM_CR_EVENTLOG_ENABLE_MASK); +} + +/*****************************************************************************/ +/** +* +* This function enables External trigger pulse so that Metric Counters can be +* started on external trigger pulse for a Slot. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note None +* +*******************************************************************************/ +void XAxiPmon_EnableMetricCounterTrigger(XAxiPmon *InstancePtr) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode != XAPM_MODE_TRACE); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + RegVal | XAPM_CR_MCNTR_EXTTRIGGER_MASK); +} + +/****************************************************************************/ +/** +* +* This function disables the External trigger pulse used to start Metric +* Counters on external trigger pulse for a Slot. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note None +* +*****************************************************************************/ +void XAxiPmon_DisableMetricCounterTrigger(XAxiPmon *InstancePtr) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode != XAPM_MODE_TRACE); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + RegVal & ~(XAPM_CR_MCNTR_EXTTRIGGER_MASK)); +} + +/*****************************************************************************/ +/** +* +* This function enables External trigger pulse for Event Log +* so that Event Logging can be started on external trigger pulse for a Slot. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note None +* +*******************************************************************************/ +void XAxiPmon_EnableEventLogTrigger(XAxiPmon *InstancePtr) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode != XAPM_MODE_PROFILE); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + RegVal | XAPM_CR_EVTLOG_EXTTRIGGER_MASK); +} + +/****************************************************************************/ +/** +* +* This function disables the External trigger pulse used to start Event +* Log on external trigger pulse for a Slot. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note None +* +*****************************************************************************/ +void XAxiPmon_DisableEventLogTrigger(XAxiPmon *InstancePtr) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(InstancePtr->Mode != XAPM_MODE_PROFILE); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, XAPM_CTL_OFFSET, + RegVal & ~(XAPM_CR_EVTLOG_EXTTRIGGER_MASK)); +} + +/****************************************************************************/ +/** +* +* This function returns a name for a given Metric. +* +* @param Metrics is one of the Metric Sets. User has to use +* XAPM_METRIC_SET_* macros in xaxipmon.h for this parameter +* +* @return const char * +* +* @note None +* +*****************************************************************************/ +const char * XAxiPmon_GetMetricName(u8 Metrics) +{ + if (Metrics == XAPM_METRIC_SET_0 ){ + return "Write Transaction Count"; + } + if (Metrics == XAPM_METRIC_SET_1 ){ + return "Read Transaction Count"; + } + if (Metrics == XAPM_METRIC_SET_2 ){ + return "Write Byte Count"; + } + if (Metrics == XAPM_METRIC_SET_3 ){ + return "Read Byte Count"; + } + if (Metrics == XAPM_METRIC_SET_4 ){ + return "Write Beat Count"; + } + if (Metrics == XAPM_METRIC_SET_5 ){ + return "Total Read Latency"; + } + if (Metrics == XAPM_METRIC_SET_6 ){ + return "Total Write Latency"; + } + if (Metrics == XAPM_METRIC_SET_7 ){ + return "Slv_Wr_Idle_Cnt"; + } + if (Metrics == XAPM_METRIC_SET_8 ){ + return "Mst_Rd_Idle_Cnt"; + } + if (Metrics == XAPM_METRIC_SET_9 ){ + return "Num_BValids"; + } + if (Metrics == XAPM_METRIC_SET_10){ + return "Num_WLasts"; + } + if (Metrics == XAPM_METRIC_SET_11){ + return "Num_RLasts"; + } + if (Metrics == XAPM_METRIC_SET_12){ + return "Minimum Write Latency"; + } + if (Metrics == XAPM_METRIC_SET_13){ + return "Maximum Write Latency"; + } + if (Metrics == XAPM_METRIC_SET_14){ + return "Minimum Read Latency"; + } + if (Metrics == XAPM_METRIC_SET_15){ + return "Maximum Read Latency"; + } + if (Metrics == XAPM_METRIC_SET_16){ + return "Transfer Cycle Count"; + } + if (Metrics == XAPM_METRIC_SET_17){ + return "Packet Count"; + } + if (Metrics == XAPM_METRIC_SET_18){ + return "Data Byte Count"; + } + if (Metrics == XAPM_METRIC_SET_19){ + return "Position Byte Count"; + } + if (Metrics == XAPM_METRIC_SET_20){ + return "Null Byte Count"; + } + if (Metrics == XAPM_METRIC_SET_21){ + return "Slv_Idle_Cnt"; + } + if (Metrics == XAPM_METRIC_SET_22){ + return "Mst_Idle_Cnt"; + } + if (Metrics == XAPM_METRIC_SET_30){ + return "External event count"; + } + return "Unsupported"; +} + +/****************************************************************************/ +/** +* +* This function sets Write ID in ID register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param WriteId is the Write ID to be written in ID register. +* +* @return None. +* +* @note +* If ID filtering for write is of 32 bits(for Zynq MP APM) width then +* WriteID is written to XAPM_ID_OFFSET or if it is 16 bit width +* then lower 16 bits of WriteID are written to XAPM_ID_OFFSET. +* +*****************************************************************************/ +void XAxiPmon_SetWriteId(XAxiPmon *InstancePtr, u32 WriteId) +{ + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET); + RegVal = RegVal & ~(XAPM_ID_WID_MASK); + RegVal = RegVal | WriteId; + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET, RegVal); + } else { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET, WriteId); + } +} + +/****************************************************************************/ +/** +* +* This function sets Read ID in ID register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param ReadId is the Read ID to be written in ID register. +* +* @return None. +* +* @note +* If ID filtering for read is of 32 bits(for Zynq MP APM) width then +* ReadId is written to XAPM_RID_OFFSET or if it is 16 bit width +* then lower 16 bits of ReadId are written to XAPM_ID_OFFSET. +* +*****************************************************************************/ +void XAxiPmon_SetReadId(XAxiPmon *InstancePtr, u32 ReadId) +{ + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET); + RegVal = RegVal & ~(XAPM_ID_RID_MASK); + RegVal = RegVal | (ReadId << 16); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET, RegVal); + } else { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_RID_OFFSET, ReadId); + } +} + +/****************************************************************************/ +/** +* +* This function returns Write ID in ID register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return WriteId is the required Write ID in ID register. +* +* @note None. +* If ID filtering for write is of 32 bits(for Zynq MP APM) width then +* 32 bit XAPM_ID_OFFSET contents are returned or if it is 16 bit +* width then lower 16 bits of XAPM_ID_OFFSET register are returned. +* +*****************************************************************************/ +u32 XAxiPmon_GetWriteId(XAxiPmon *InstancePtr) +{ + + u32 WriteId; + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET); + WriteId = RegVal & XAPM_ID_WID_MASK; + } else { + WriteId = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET); + } + + return WriteId; +} + +/****************************************************************************/ +/** +* +* This function returns Read ID in ID register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return ReadId is the required Read ID in ID register. +* +* @note None. +* If ID filtering for write is of 32 bits(for Zynq MP APM) width then +* 32 bit XAPM_RID_OFFSET contents are returned or if it is 16 bit +* width then higher 16 bits of XAPM_ID_OFFSET register are returned. +* +*****************************************************************************/ +u32 XAxiPmon_GetReadId(XAxiPmon *InstancePtr) +{ + + u32 ReadId; + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_ID_OFFSET); + RegVal = RegVal & XAPM_ID_RID_MASK; + ReadId = RegVal >> 16; + } else { + ReadId = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_RID_OFFSET); + } + + return ReadId; +} + +/*****************************************************************************/ +/** +* +* This function sets Latency Start point to calculate write latency. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Param is XAPM_LATENCY_ADDR_ISSUE or XAPM_LATENCY_ADDR_ACCEPT +* in xaxipmon.h. +* @return None +* +* @note Param can be 0 - XAPM_LATENCY_ADDR_ISSUE +* or 1 - XAPM_LATENCY_ADDR_ACCEPT +* +*******************************************************************************/ +void XAxiPmon_SetWrLatencyStart(XAxiPmon *InstancePtr, u8 Param) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + if (Param == XAPM_LATENCY_ADDR_ACCEPT) { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET, RegVal | XAPM_CR_WRLATENCY_START_MASK); + } + else { + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET, + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET) & ~(XAPM_CR_WRLATENCY_START_MASK)); + } +} + +/*****************************************************************************/ +/** +* +* This function sets Latency End point to calculate write latency. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Param is XAPM_LATENCY_LASTWR or XAPM_LATENCY_FIRSTWR +* in xaxipmon.h. +* +* @return None +* +* @note Param can be 0 - XAPM_LATENCY_LASTWR +* or 1 - XAPM_LATENCY_FIRSTWR +* +*******************************************************************************/ +void XAxiPmon_SetWrLatencyEnd(XAxiPmon *InstancePtr, u8 Param) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + if (Param == XAPM_LATENCY_FIRSTWR) { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET, RegVal | XAPM_CR_WRLATENCY_END_MASK); + } + else { + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET, + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET) & ~(XAPM_CR_WRLATENCY_END_MASK)); + } +} + +/*****************************************************************************/ +/** +* +* This function sets Latency Start point to calculate read latency. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Param is XAPM_LATENCY_ADDR_ISSUE or XAPM_LATENCY_ADDR_ACCEPT +* in xaxipmon.h. +* +* @return None +* +* @note Param can be 0 - XAPM_LATENCY_ADDR_ISSUE +* or 1 - XAPM_LATENCY_ADDR_ACCEPT +* +*******************************************************************************/ +void XAxiPmon_SetRdLatencyStart(XAxiPmon *InstancePtr, u8 Param) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + if (Param == XAPM_LATENCY_ADDR_ACCEPT) { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET, RegVal | XAPM_CR_RDLATENCY_START_MASK); + } + else { + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET, + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET) & ~(XAPM_CR_RDLATENCY_START_MASK)); + } +} + +/*****************************************************************************/ +/** +* +* This function sets Latency End point to calculate read latency. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Param is XAPM_LATENCY_LASTRD or XAPM_LATENCY_FIRSTRD +* in xaxipmon.h. +* +* @return None +* +* @note Param can be 0 - XAPM_LATENCY_LASTRD +* or 1 - XAPM_LATENCY_FIRSTRD +* +*******************************************************************************/ +void XAxiPmon_SetRdLatencyEnd(XAxiPmon *InstancePtr, u8 Param) +{ + u32 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET); + if (Param == XAPM_LATENCY_FIRSTRD) { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_CTL_OFFSET, RegVal | XAPM_CR_RDLATENCY_END_MASK); + } + else { + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET, + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, + XAPM_CTL_OFFSET) & ~(XAPM_CR_RDLATENCY_END_MASK)); + } +} + +/*****************************************************************************/ +/** +* +* This function returns Write Latency Start point. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return Returns 0 - XAPM_LATENCY_ADDR_ISSUE or +* 1 - XAPM_LATENCY_ADDR_ACCEPT +* +* @note None +* +*******************************************************************************/ +u8 XAxiPmon_GetWrLatencyStart(XAxiPmon *InstancePtr) +{ + u8 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = (u8)XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + RegVal = RegVal & XAPM_CR_WRLATENCY_START_MASK; + if (RegVal != XAPM_LATENCY_ADDR_ISSUE) { + return (u8)XAPM_LATENCY_ADDR_ACCEPT; + } + else { + return (u8)XAPM_LATENCY_ADDR_ISSUE; + } +} + +/*****************************************************************************/ +/** +* +* This function returns Write Latency End point. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return Returns 0 - XAPM_LATENCY_LASTWR or +* 1 - XAPM_LATENCY_FIRSTWR. +* +* @note None +* +*******************************************************************************/ +u8 XAxiPmon_GetWrLatencyEnd(XAxiPmon *InstancePtr) +{ + u8 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = (u8)XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + RegVal = RegVal & XAPM_CR_WRLATENCY_END_MASK; + if (RegVal != XAPM_LATENCY_LASTWR) { + return (u8)XAPM_LATENCY_FIRSTWR; + } + else { + return (u8)XAPM_LATENCY_LASTWR; + } +} + +/*****************************************************************************/ +/** +* +* This function returns read Latency Start point. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return Returns 0 - XAPM_LATENCY_ADDR_ISSUE or +* 1 - XAPM_LATENCY_ADDR_ACCEPT +* +* @note None +* +*******************************************************************************/ +u8 XAxiPmon_GetRdLatencyStart(XAxiPmon *InstancePtr) +{ + u8 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = (u8)XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + RegVal = RegVal & XAPM_CR_RDLATENCY_START_MASK; + + if (RegVal != XAPM_LATENCY_ADDR_ISSUE) { + return (u8)XAPM_LATENCY_ADDR_ACCEPT; + } + else { + return (u8)XAPM_LATENCY_ADDR_ISSUE; + } +} + +/*****************************************************************************/ +/** +* +* This function returns Read Latency End point. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return Returns 0 - XAPM_LATENCY_LASTRD or +* 1 - XAPM_LATENCY_FIRSTRD. +* +* @note None +* +*******************************************************************************/ +u8 XAxiPmon_GetRdLatencyEnd(XAxiPmon *InstancePtr) +{ + u8 RegVal; + + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + RegVal = (u8)XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + (u32)XAPM_CTL_OFFSET); + RegVal = RegVal & XAPM_CR_RDLATENCY_END_MASK; + if (RegVal != XAPM_LATENCY_LASTRD) { + return (u8)XAPM_LATENCY_FIRSTRD; + } + else { + return (u8)XAPM_LATENCY_LASTRD; + } + +} + +/****************************************************************************/ +/** +* +* This function sets Write ID Mask in ID Mask register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param WrMask is the Write ID mask to be written in ID register. +* +* @return None. +* +* @note +* If ID masking for write is of 32 bits(for Zynq MP APM) width then +* WrMask is written to XAPM_IDMASK_OFFSET or if it is 16 bit width +* then lower 16 bits of WrMask are written to XAPM_IDMASK_OFFSET. +* +*****************************************************************************/ +void XAxiPmon_SetWriteIdMask(XAxiPmon *InstancePtr, u32 WrMask) +{ + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET); + RegVal = RegVal & ~(XAPM_MASKID_WID_MASK); + RegVal = RegVal | WrMask; + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET, RegVal); + } else { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET, WrMask); + } +} + +/****************************************************************************/ +/** +* +* This function sets Read ID Mask in ID Mask register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param RdMask is the Read ID mask to be written in ID Mask register. +* +* @return None. +* +* @note +* If ID masking for read is of 32 bits(for Zynq MP APM) width then +* RdMask is written to XAPM_RIDMASK_OFFSET or if it is 16 bit width +* then lower 16 bits of RdMask are written to XAPM_IDMASK_OFFSET. +* +*****************************************************************************/ +void XAxiPmon_SetReadIdMask(XAxiPmon *InstancePtr, u32 RdMask) +{ + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET); + RegVal = RegVal & ~(XAPM_MASKID_RID_MASK); + RegVal = RegVal | (RdMask << 16); + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET, RegVal); + } else { + XAxiPmon_WriteReg(InstancePtr->Config.BaseAddress, + XAPM_RIDMASK_OFFSET, RdMask); + } +} + +/****************************************************************************/ +/** +* +* This function returns Write ID Mask in ID Mask register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return WrMask is the required Write ID Mask in ID Mask register. +* +* @note +* If ID masking for write is of 32 bits(for Zynq MP APM) width then +* 32 bit XAPM_IDMASK_OFFSET contents are returned or if it is 16 bit +* width then lower 16 bits of XAPM_IDMASK_OFFSET register +* are returned. +* +*****************************************************************************/ +u32 XAxiPmon_GetWriteIdMask(XAxiPmon *InstancePtr) +{ + + u32 WrMask; + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET); + WrMask = RegVal & XAPM_MASKID_WID_MASK; + } else { + WrMask = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET); + } + + return WrMask; +} + +/****************************************************************************/ +/** +* +* This function returns Read ID Mask in ID Mask register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return RdMask is the required Read ID Mask in ID Mask register. +* +* @note +* If ID masking for read is of 32 bits(for Zynq MP APM) width then +* 32 bit XAPM_RIDMASK_OFFSET contents are returned or if it is 16 bit +* width then higher 16 bits of XAPM_IDMASK_OFFSET register +* are returned. +* +*****************************************************************************/ +u32 XAxiPmon_GetReadIdMask(XAxiPmon *InstancePtr) +{ + + u32 RdMask; + u32 RegVal; + /* + * Assert the arguments. + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (InstancePtr->Config.Is32BitFiltering == 0U) + { + RegVal = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_IDMASK_OFFSET); + RegVal = RegVal & XAPM_MASKID_RID_MASK; + RdMask = RegVal >> 16; + } else { + RdMask = XAxiPmon_ReadReg(InstancePtr->Config.BaseAddress, + XAPM_RIDMASK_OFFSET); + } + + return RdMask; +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon.h new file mode 100644 index 000000000..f8d4d6467 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon.h @@ -0,0 +1,938 @@ +/****************************************************************************** +* +* Copyright (C) 2007 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/****************************************************************************/ +/** +* +* @file xaxipmon.h +* @addtogroup axipmon_v6_3 +* @{ +* @details +* +* The XAxiPmon driver supports the Xilinx AXI Performance Monitor device. +* +* The AXI Performance Monitor device provides following features: +* +* Configurable number of Metric Counters and Incrementers +* Computes performance metrics for Agents connected to +* monitor slots (Up to 8 slots) +* +* The following Metrics can be computed: +* +* Metrics computed for an AXI4 MM agent: +* Write Request Count: Total number of write requests by/to the agent. +* Read Request Count: Total number of read requests given by/to the +* agent. +* Read Latency: It is defined as the time from the start of read address +* transaction to the beginning of the read data service. +* Write Latency: It is defined as the period needed a master completes +* write data transaction, i.e. from write address +* transaction to write response from slave. +* Write Byte Count: Total number of bytes written by/to the agent. +* This metric is helpful when calculating the +* throughput of the system. +* Read Byte Count: Total number of bytes read from/by the agent. +* Average Write Latency: Average write latency seen by the agent. +* It can be derived from total write latency +* and the write request count. +* Average Read Latency: Average read latency seen by the agent. It can be +* derived from total read latency and the read +* request count. +* Master Write Idle Cycle Count: Number of idle cycles caused by the +* masters during write transactions to +* the slave. +* Slave Write Idle Cycle Count: Number of idle cycles caused by this slave +* during write transactions to the slave. +* Master Read Idle Cycle Count: Number of idle cycles caused by the +* master during read transactions to the +* slave. +* Slave Read Idle Cycle Count: Number of idle cycles caused by this slave +* during read transactions to the slave. +* +* Metrics computed for an AXI4-Stream agent: +* +* Transfer Cycle Count: Total number of writes by/to the agent. +* Data Byte Count: Total number of data bytes written by/to the agent. +* This metric helps in calculating the throughput +* of the system. +* Position Byte Count: Total number of position bytes transferred. +* Null Byte Count: Total number of null bytes transferred. +* Packet Count: Total number of packets transferred. +* +* There are three modes : Advanced, Profile and Trace. +* - Advanced mode has 10 Mertic Counters, Sampled Metric Counters, Incrementors +* and Sampled Incrementors. +* - Profile mode has only 47 Metric Counters and Sampled Metric Counters. +* - Trace mode has no Counters. +* User should refer to the hardware device specification for detailed +* information about the device. +* +* This header file contains the prototypes of driver functions that can +* be used to access the AXI Performance Monitor device. +* +* +* Initialization and Configuration +* +* The device driver enables higher layer software (e.g., an application) to +* communicate to the AXI Performance Monitor device. +* +* XAxiPmon_CfgInitialize() API is used to initialize the AXI Performance Monitor +* device. The user needs to first call the XAxiPmon_LookupConfig() API which +* returns the Configuration structure pointer which is passed as a parameter to +* the XAxiPmon_CfgInitialize() API. +* +* +* Interrupts +* +* The AXI Performance Monitor does not support Interrupts +* +* +* Virtual Memory +* +* This driver supports Virtual Memory. The RTOS is responsible for calculating +* the correct device base address in Virtual Memory space. +* +* +* Threads +* +* This driver is not thread safe. Any needs for threads or thread mutual +* exclusion must be satisfied by the layer above this driver. +* +* Asserts +* +* Asserts are used within all Xilinx drivers to enforce constraints on argument +* values. Asserts can be turned off on a system-wide basis by defining, at +* compile time, the NDEBUG identifier. By default, asserts are turned on and it +* is recommended that users leave asserts on during development. +* +* +* Building the driver +* +* The XAxiPmon driver is composed of several source files. This allows the user +* to build and link only those parts of the driver that are necessary. +* +* Limitations of the driver +* +* +*

+* +* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- -----  -------- -----------------------------------------------------
+* 1.00a bss    02/27/12 First release
+* 2.00a bss    06/23/12 Updated to support v2_00a version of IP.
+* 3.00a bss    09/03/12 To support v2_01_a version of IP:
+*			Deleted XAxiPmon_SetAgent, XAxiPmon_GetAgent APIs and
+*			added XAPM_FLAG_EVENT, XAPM_FLAG_EVNTSTAR,
+*			XAPM_FLAG_EVNTSTOP.
+*			Deleted XAxiPmon_SetAgent, XAxiPmon_GetAgent APIs and
+*			modified XAxiPmon_SetMetrics, XAxiPmon_GetMetrics APIs
+*			in xaxipmon.c
+*			Deleted XAPM_AGENT_OFFSET Macro in xaxipmon_hw.h
+* 3.01a bss    10/25/12 To support new version of IP:
+*			Added XAPM_MCXLOGEN_OFFSET macros in xaxipmon_hw.h.
+*			Added XAxiPmon_SetMetricCounterCutOff,
+*			XAxiPmon_GetMetricCounterCutOff,
+*			XAxiPmon_EnableExternalTrigger and
+*			XAxiPmon_DisableExternalTrigger APIs in xaxipmon.c
+*			Modified XAxiPmon_SetMetrics and XAxiPmon_GetMetrics
+*			(CR #683746) in xaxipmon.c
+*			Added XAxiPmon_EnableEventLog,
+*			XAxiPmon_DisableMetricsCounter,
+*			XAxiPmon_EnableMetricsCounter APIs in xaxipmon.c to
+*			replace macros in this file.
+*			Added XAPM_FLAG_XXX macros.
+*			Added XAxiPmon_StartCounters and XAxiPmon_StopCounters
+*			APIs (CR #683799).
+*			Added XAxiPmon_StartEventLog and XAxiPmon_StopEventLog
+*			APIs (CR #683801).
+*			Added XAxiPmon_GetMetricName API (CR #683803).
+*			Deleted XAxiPmon_SetAgent, XAxiPmon_GetAgent
+*			declarations (CR #677337)
+* 4.00a bss    01/17/13 To support new version of IP:
+*			Added XAPM_METRIC_SET_12 to XAPM_METRIC_SET_15 macros.
+*			Added XAxiPmon_SetLogEnableRanges,
+*	  		XAxiPmon_GetLogEnableRanges,
+*			XAxiPmon_EnableMetricCounterTrigger,
+*			XAxiPmon_DisableMetricCounterTrigger,
+*			XAxiPmon_EnableEventLogTrigger,
+*			XAxiPmon_DisableEventLogTrigger,
+*			XAxiPmon_SetWriteLatencyId,
+*			XAxiPmon_SetReadLatencyId,
+*			XAxiPmon_GetWriteLatencyId,
+*			XAxiPmon_GetReadLatencyId APIs and removed
+*			XAxiPmon_SetMetricCounterCutOff,
+*			XAxiPmon_GetMetricCounterCutOff,
+*			XAxiPmon_EnableExternalTrigger and
+*			XAxiPmon_DisableExternalTrigger APIs in xaxipmon.c
+*			Added XAPM_LATENCYID_OFFSET,
+*			XAPM_CR_EVTLOG_EXTTRIGGER_MASK,
+*			XAPM_LATENCYID_RID_MASK and XAPM_LATENCYID_WID_MASK in
+*			xaxipmon_hw.h
+* 5.00a bss   08/26/13  To support new version of IP:
+*			XAxiPmon_SampleMetrics Macro.
+*			Modified XAxiPmon_CfgInitialize, Assert functions
+*			Added XAxiPmon_GetMetricCounter,
+*			XAxiPmon_SetSampleInterval, XAxiPmon_GetSampleInterval,
+*			XAxiPmon_SetWrLatencyStart, XAxiPmon_SetWrLatencyEnd,
+*			XAxiPmon_SetRdLatencyStart, XAxiPmon_SetRdLatencyEnd,
+*			XAxiPmon_GetWrLatencyStart, XAxiPmon_GetWrLatencyEnd,
+*			XAxiPmon_GetRdLatencyStart, XAxiPmon_GetRdLatencyEnd,
+*			XAxiPmon_SetWriteIdMask, XAxiPmon_SetReadIdMask,
+*			XAxiPmon_GetWriteIdMask and XAxiPmon_GetReadIdMask APIs
+*			Renamed :
+*			XAxiPmon_SetWriteLatencyId to
+*			XAxiPmon_SetWriteId, XAxiPmon_SetReadLatencyId to
+*			XAxiPmon_SetReadId, XAxiPmon_GetWriteLatencyId to
+*			XAxiPmon_GetWriteId and XAxiPmon_SetReadLatencyId to
+*			XAxiPmon_GetReadId. in xaxipmon.c
+*			Added Macros XAPM_MC10_OFFSET to XAPM_MC47_OFFSET,
+*			XAPM_SMC10_OFFSET to XAPM_SMC47_OFFSET,
+*			XAPM_IDMASK_OFFSET, XAPM_CR_IDFILTER_ENABLE_MASK,
+*			XAPM_CR_WRLATENCY_START_MASK,
+*			XAPM_CR_WRLATENCY_END_MASK,
+*			XAPM_CR_RDLATENCY_START_MASK,
+*			XAPM_CR_RDLATENCY_END_MASK and
+*			XAPM_MAX_COUNTERS_PROFILE.
+*			Renamed:
+*			XAPM_LATENCYID_OFFSET to XAPM_ID_OFFSET,
+*			XAPM_LATENCYID_RID_MASK to XAPM_ID_RID_MASK,
+*			XAPM_LATENCYID_WID_MASK to XAPM_ID_WID_MASK.
+*			in xaxipmon_hw.h.
+*			Modified driver tcl to generate new parameters
+*			ScaleFactor, ModeProfile, ModeTrace and ModeAdvanced
+*			in Config structure.
+* 6.0   adk  19/12/13 Updated as per the New Tcl API's
+* 6.1   adk  16/04/14 Updated the driver tcl for the newly added parameters in
+* 		      The Axi pmon IP.
+* 6.2   bss  04/21/14   Updated XAxiPmon_CfgInitialize in xaxipmon.c to Reset
+*			counters and FIFOs based on Modes(CR#782671). And if
+*			both profile and trace modes are present set mode as
+*			Advanced.
+* 6.2	bss  03/02/15	To support Zynq MP APM:
+*						Added Is32BitFiltering in XAxiPmon_Config structure.
+*						Updated XAxiPmon_SetWriteId, XAxiPmon_SetReadId,
+*						XAxiPmon_GetWriteId, XAxiPmon_GetReadId
+*						XAxiPmon_SetWriteIdMask, XAxiPmon_SetReadIdMask
+*						XAxiPmon_GetWriteIdMask, XAxiPmon_GetReadIdMask
+*						functions in xaxipmon.c.
+*						Added XAPM_RID_OFFSET and XAPM_RIDMASK_OFFSET in
+*						xaxipmon_hw.h
+*
+* 6.3	kvn  07/02/15	Modified code according to MISRA-C:2012 guidelines.
+* 6.4   sk   11/10/15 Used UINTPTR instead of u32 for Baseaddress CR# 867425.
+*                     Changed the prototype of XAxiPmon_CfgInitialize API.
+*
+* +*****************************************************************************/ +#ifndef XAXIPMON_H /* Prevent circular inclusions */ +#define XAXIPMON_H /* by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files ********************************/ + +#include "xil_types.h" +#include "xil_assert.h" +#include "xstatus.h" +#include "xaxipmon_hw.h" + +/************************** Constant Definitions ****************************/ + + +/** + * @name Macro for Maximum number of Counters + * + * @{ + */ +#define XAPM_MAX_COUNTERS 10U /**< Maximum number of Counters */ +#define XAPM_MAX_COUNTERS_PROFILE 48U /**< Maximum number of Counters */ + +/*@}*/ + + +/** + * @name Indices for Metric Counters and Sampled Metric Coounters used with + * XAxiPmon_GetMetricCounter and XAxiPmon_GetSampledMetricCounter APIs + * @{ + */ + +#define XAPM_METRIC_COUNTER_0 0U /**< Metric Counter 0 Register Index */ +#define XAPM_METRIC_COUNTER_1 1U /**< Metric Counter 1 Register Index */ +#define XAPM_METRIC_COUNTER_2 2U /**< Metric Counter 2 Register Index */ +#define XAPM_METRIC_COUNTER_3 3U /**< Metric Counter 3 Register Index */ +#define XAPM_METRIC_COUNTER_4 4U /**< Metric Counter 4 Register Index */ +#define XAPM_METRIC_COUNTER_5 5U /**< Metric Counter 5 Register Index */ +#define XAPM_METRIC_COUNTER_6 6U /**< Metric Counter 6 Register Index */ +#define XAPM_METRIC_COUNTER_7 7U /**< Metric Counter 7 Register Index */ +#define XAPM_METRIC_COUNTER_8 8U /**< Metric Counter 8 Register Index */ +#define XAPM_METRIC_COUNTER_9 9U /**< Metric Counter 9 Register Index */ + +/*@}*/ + +/** + * @name Indices for Incrementers and Sampled Incrementers used with + * XAxiPmon_GetIncrementer and XAxiPmon_GetSampledIncrementer APIs + * @{ + */ + +#define XAPM_INCREMENTER_0 0U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_1 1U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_2 2U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_3 3U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_4 4U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_5 5U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_6 6U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_7 7U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_8 8U /**< Metric Counter 0 Register Index */ +#define XAPM_INCREMENTER_9 9U /**< Metric Counter 0 Register Index */ + +/*@}*/ + +/** + * @name Macros for Metric Selector Settings + * @{ + */ + +#define XAPM_METRIC_SET_0 0U /**< Write Transaction Count */ +#define XAPM_METRIC_SET_1 1U /**< Read Transaction Count */ +#define XAPM_METRIC_SET_2 2U /**< Write Byte Count */ +#define XAPM_METRIC_SET_3 3U /**< Read Byte Count */ +#define XAPM_METRIC_SET_4 4U /**< Write Beat Count */ +#define XAPM_METRIC_SET_5 5U /**< Total Read Latency */ +#define XAPM_METRIC_SET_6 6U /**< Total Write Latency */ +#define XAPM_METRIC_SET_7 7U /**< Slv_Wr_Idle_Cnt */ +#define XAPM_METRIC_SET_8 8U /**< Mst_Rd_Idle_Cnt */ +#define XAPM_METRIC_SET_9 9U /**< Num_BValids */ +#define XAPM_METRIC_SET_10 10U /**< Num_WLasts */ +#define XAPM_METRIC_SET_11 11U /**< Num_RLasts */ +#define XAPM_METRIC_SET_12 12U /**< Minimum Write Latency */ +#define XAPM_METRIC_SET_13 13U /**< Maximum Write Latency */ +#define XAPM_METRIC_SET_14 14U /**< Minimum Read Latency */ +#define XAPM_METRIC_SET_15 15U /**< Maximum Read Latency */ +#define XAPM_METRIC_SET_16 16U /**< Transfer Cycle Count */ +#define XAPM_METRIC_SET_17 17U /**< Packet Count */ +#define XAPM_METRIC_SET_18 18U /**< Data Byte Count */ +#define XAPM_METRIC_SET_19 19U /**< Position Byte Count */ +#define XAPM_METRIC_SET_20 20U /**< Null Byte Count */ +#define XAPM_METRIC_SET_21 21U /**< Slv_Idle_Cnt */ +#define XAPM_METRIC_SET_22 22U /**< Mst_Idle_Cnt */ +#define XAPM_METRIC_SET_30 30U /**< External event count */ + + +/*@}*/ + + +/** + * @name Macros for Maximum number of Agents + * @{ + */ + +#define XAPM_MAX_AGENTS 8U /**< Maximum number of Agents */ + +/*@}*/ + +/** + * @name Macros for Flags in Flag Enable Control Register + * @{ + */ + +#define XAPM_FLAG_WRADDR 0x00000001 /**< Write Address Flag */ +#define XAPM_FLAG_FIRSTWR 0x00000002 /**< First Write Flag */ +#define XAPM_FLAG_LASTWR 0x00000004 /**< Last Write Flag */ +#define XAPM_FLAG_RESPONSE 0x00000008 /**< Response Flag */ +#define XAPM_FLAG_RDADDR 0x00000010 /**< Read Address Flag */ +#define XAPM_FLAG_FIRSTRD 0x00000020 /**< First Read Flag */ +#define XAPM_FLAG_LASTRD 0x00000040 /**< Last Read Flag */ +#define XAPM_FLAG_SWDATA 0x00010000 /**< Software-written Data Flag */ +#define XAPM_FLAG_EVENT 0x00020000 /**< Last Read Flag */ +#define XAPM_FLAG_EVNTSTOP 0x00040000 /**< Last Read Flag */ +#define XAPM_FLAG_EVNTSTART 0x00080000 /**< Last Read Flag */ +#define XAPM_FLAG_GCCOVF 0x00100000 /**< Global Clock Counter Overflow + * Flag */ +#define XAPM_FLAG_SCLAPSE 0x00200000 /**< Sample Counter Lapse Flag */ +#define XAPM_FLAG_MC0 0x00400000U /**< Metric Counter 0 Flag */ +#define XAPM_FLAG_MC1 0x00800000U /**< Metric Counter 1 Flag */ +#define XAPM_FLAG_MC2 0x01000000U /**< Metric Counter 2 Flag */ +#define XAPM_FLAG_MC3 0x02000000U /**< Metric Counter 3 Flag */ +#define XAPM_FLAG_MC4 0x04000000U /**< Metric Counter 4 Flag */ +#define XAPM_FLAG_MC5 0x08000000U /**< Metric Counter 5 Flag */ +#define XAPM_FLAG_MC6 0x10000000U /**< Metric Counter 6 Flag */ +#define XAPM_FLAG_MC7 0x20000000U /**< Metric Counter 7 Flag */ +#define XAPM_FLAG_MC8 0x40000000U /**< Metric Counter 8 Flag */ +#define XAPM_FLAG_MC9 0x80000000U /**< Metric Counter 9 Flag */ + +/*@}*/ + +/** + * @name Macros for Read/Write Latency Start and End points + * @{ + */ +#define XAPM_LATENCY_ADDR_ISSUE 0U /**< Address Issue as start + point for Latency calculation*/ +#define XAPM_LATENCY_ADDR_ACCEPT 1U /**< Address Acceptance as start + point for Latency calculation*/ +#define XAPM_LATENCY_LASTRD 0U /**< Last Read as end point for + Latency calculation */ +#define XAPM_LATENCY_LASTWR 0U /**< Last Write as end point for + Latency calculation */ +#define XAPM_LATENCY_FIRSTRD 1U /**< First Read as end point for + Latency calculation */ +#define XAPM_LATENCY_FIRSTWR 1U /**< First Write as end point for + Latency calculation */ + +/*@}*/ + +/** + * @name Macros for Modes of APM + * @{ + */ + +#define XAPM_MODE_TRACE 2U /**< APM in Trace mode */ + +#define XAPM_MODE_PROFILE 1U /**< APM in Profile mode */ + +#define XAPM_MODE_ADVANCED 0U /**< APM in Advanced mode */ + +/*@}*/ + +/**************************** Type Definitions *******************************/ + +/** + * This typedef contains configuration information for the AXI Performance + * Monitor device. + */ +typedef struct { + u16 DeviceId; /**< Unique ID of device */ + UINTPTR BaseAddress; /**< Device base address */ + s32 GlobalClkCounterWidth; /**< Global Clock Counter Width */ + s32 MetricSampleCounterWidth ; /**< Metric Sample Counters Width */ + u8 IsEventCount; /**< Event Count Enabled 1 - enabled + 0 - not enabled */ + u8 NumberofSlots; /**< Number of Monitor Slots */ + u8 NumberofCounters; /**< Number of Counters */ + u8 HaveSampledCounters; /**< Have Sampled Counters 1 - present + 0 - Not present */ + u8 IsEventLog; /**< Event Logging Enabled 1 - enabled + 0 - Not enabled */ + u32 FifoDepth; /**< Event Log FIFO Depth */ + u32 FifoWidth; /**< Event Log FIFO Width */ + u32 TidWidth; /**< Streaming Interface TID Width */ + u8 ScaleFactor; /**< Event Count Scaling factor */ + u8 ModeAdvanced; /**< Advanced Mode */ + u8 ModeProfile; /**< Profile Mode */ + u8 ModeTrace; /**< Trace Mode */ + u8 Is32BitFiltering; /**< 32 bit filtering enabled */ +} XAxiPmon_Config; + + +/** + * The driver's instance data. The user is required to allocate a variable + * of this type for every AXI Performance Monitor device in system. A pointer + * to a variable of this type is then passed to the driver API functions. + */ +typedef struct { + XAxiPmon_Config Config; /**< XAxiPmon_Config of current device */ + u32 IsReady; /**< Device is initialized and ready */ + u8 Mode; /**< APM Mode */ +} XAxiPmon; + +/***************** Macros (Inline Functions) Definitions ********************/ + + +/****************************************************************************/ +/** +* +* This routine enables the Global Interrupt. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None. +* +* @note C-Style signature: +* void XAxiPmon_IntrGlobalEnable(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_IntrGlobalEnable(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, \ + XAPM_GIE_OFFSET, 1) + + +/****************************************************************************/ +/** +* +* This routine disables the Global Interrupt. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None. +* +* @note C-Style signature: +* void XAxiPmon_IntrGlobalDisable(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_IntrGlobalDisable(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, \ + XAPM_GIE_OFFSET, 0) + + +/****************************************************************************/ +/** +* +* This routine enables interrupt(s). Use the XAPM_IXR_* constants defined in +* xaxipmon_hw.h to create the bit-mask to enable interrupts. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Mask is the mask to enable. Bit positions of 1 will be enabled. +* Bit positions of 0 will keep the previous setting. This mask is +* formed by OR'ing XAPM_IXR__* bits defined in xaxipmon_hw.h. +* +* @return None. +* +* @note C-Style signature: +* void XAxiPmon_IntrEnable(XAxiPmon *InstancePtr, u32 Mask) +* +*****************************************************************************/ +#define XAxiPmon_IntrEnable(InstancePtr, Mask) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_IE_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_IE_OFFSET) | (Mask)); + + +/****************************************************************************/ +/** +* +* This routine disable interrupt(s). Use the XAPM_IXR_* constants defined in +* xaxipmon_hw.h to create the bit-mask to disable interrupts. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Mask is the mask to disable. Bit positions of 1 will be +* disabled. Bit positions of 0 will keep the previous setting. +* This mask is formed by OR'ing XAPM_IXR_* bits defined in +* xaxipmon_hw.h. +* +* @return None. +* +* @note C-Style signature: +* void XAxiPmon_IntrEnable(XAxiPmon *InstancePtr, u32 Mask) +* +*****************************************************************************/ +#define XAxiPmon_IntrDisable(InstancePtr, Mask) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_IE_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_IE_OFFSET) | (Mask)); + +/****************************************************************************/ +/** +* +* This routine clears the specified interrupt(s). +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Mask is the mask to clear. Bit positions of 1 will be cleared. +* This mask is formed by OR'ing XAPM_IXR_* bits defined in +* xaxipmon_hw.h. +* +* @return None. +* +* @note C-Style signature: +* void XAxiPmon_IntrClear(XAxiPmon *InstancePtr, u32 Mask) +* +*****************************************************************************/ +#define XAxiPmon_IntrClear(InstancePtr, Mask) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_IS_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_IS_OFFSET) | (Mask)); + +/****************************************************************************/ +/** +* +* This routine returns the Interrupt Status Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return Interrupt Status Register contents +* +* @note C-Style signature: +* void XAxiPmon_IntrClear(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_IntrGetStatus(InstancePtr) \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_IS_OFFSET); + +/****************************************************************************/ +/** +* +* This function enables the Global Clock Counter. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_EnableGlobalClkCounter(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_EnableGlobalClkCounter(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_CTL_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_CTL_OFFSET) | XAPM_CR_GCC_ENABLE_MASK); + +/****************************************************************************/ +/** +* +* This function disbles the Global Clock Counter. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_DisableGlobalClkCounter(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_DisableGlobalClkCounter(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_CTL_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_CTL_OFFSET) & ~(XAPM_CR_GCC_ENABLE_MASK)); + +/****************************************************************************/ +/** +* +* This function enables the specified flag in Flag Control Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Flag is one of the XAPM_FLAG_* masks defined in xaxipmon.h +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_EnableFlag(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_EnableFlag(InstancePtr, Flag) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_FEC_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_FEC_OFFSET) | (Flag)); + +/****************************************************************************/ +/** +* +* This function disables the specified flag in Flag Control Register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* @param Flag is one of the XAPM_FLAG_* masks defined in xaxipmon.h* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_DisableFlag(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_DisableFlag(InstancePtr, Flag) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_FEC_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_FEC_OFFSET) & ~(Flag)); + +/****************************************************************************/ +/** +* +* This function loads the sample interval register value into the sample +* interval counter. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_LoadSampleIntervalCounter(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_LoadSampleIntervalCounter(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_SICR_OFFSET, \ + XAPM_SICR_LOAD_MASK); + + + +/****************************************************************************/ +/** +* +* This enables the down count of the sample interval counter. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_EnableSampleIntervalCounter(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_EnableSampleIntervalCounter(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_SICR_OFFSET,\ + XAPM_SICR_ENABLE_MASK); + + +/****************************************************************************/ +/** +* +* This disables the down count of the sample interval counter. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_DisableSampleIntervalCounter(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_DisableSampleIntervalCounter(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_SICR_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_SICR_OFFSET) & ~(XAPM_SICR_ENABLE_MASK)); + +/****************************************************************************/ +/** +* +* This enables Reset of Metric Counters when Sample Interval Counter lapses. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_EnableMetricCounterReset(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_EnableMetricCounterReset(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_SICR_OFFSET,\ + XAPM_SICR_MCNTR_RST_MASK); + +/****************************************************************************/ +/** +* +* This disables the down count of the sample interval counter. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_DisableMetricCounterReset(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_DisableMetricCounterReset(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_SICR_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_SICR_OFFSET) & ~(XAPM_SICR_MCNTR_RST_MASK)); + +/****************************************************************************/ +/** +* +* This function enables the ID Filter Masking. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_EnableIDFilter(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_EnableIDFilter(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_CTL_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_CTL_OFFSET) | XAPM_CR_IDFILTER_ENABLE_MASK); + +/****************************************************************************/ +/** +* +* This function disbles the ID Filter masking. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return None +* +* @note C-Style signature: +* void XAxiPmon_DisableIDFilter(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_DisableIDFilter(InstancePtr) \ + XAxiPmon_WriteReg((InstancePtr)->Config.BaseAddress, XAPM_CTL_OFFSET, \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, \ + XAPM_CTL_OFFSET) & ~(XAPM_CR_IDFILTER_ENABLE_MASK)); + +/****************************************************************************/ +/** +* +* This function samples Metric Counters to Sampled Metric Counters by +* reading Sample Register and also returns interval. i.e. the number of +* clocks in between previous read to the current read of sample register. +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return Interval. i.e. the number of clocks in between previous +* read to the current read of sample register. +* +* @note C-Style signature: +* u32 XAxiPmon_SampleMetrics(XAxiPmon *InstancePtr) +* +*****************************************************************************/ +#define XAxiPmon_SampleMetrics(InstancePtr) \ + XAxiPmon_ReadReg((InstancePtr)->Config.BaseAddress, XAPM_SR_OFFSET); + + +/************************** Function Prototypes *****************************/ + +/** + * Functions in xaxipmon_sinit.c + */ +XAxiPmon_Config *XAxiPmon_LookupConfig(u16 DeviceId); + +/** + * Functions in xaxipmon.c + */ +s32 XAxiPmon_CfgInitialize(XAxiPmon *InstancePtr, + XAxiPmon_Config *ConfigPtr, UINTPTR EffectiveAddr); + +s32 XAxiPmon_ResetMetricCounter(XAxiPmon *InstancePtr); + +void XAxiPmon_ResetGlobalClkCounter(XAxiPmon *InstancePtr); + +s32 XAxiPmon_ResetFifo(XAxiPmon *InstancePtr); + +void XAxiPmon_SetIncrementerRange(XAxiPmon *InstancePtr, u8 IncrementerNum, + u16 RangeUpper, u16 RangeLower); + +void XAxiPmon_GetIncrementerRange(XAxiPmon *InstancePtr, u8 IncrementerNum, + u16 *RangeUpper, u16 *RangeLower); + +void XAxiPmon_SetSampleInterval(XAxiPmon *InstancePtr, u32 SampleInterval); + +void XAxiPmon_GetSampleInterval(XAxiPmon *InstancePtr, u32 *SampleInterval); + +s32 XAxiPmon_SetMetrics(XAxiPmon *InstancePtr, u8 Slot, u8 Metrics, + u8 CounterNum); + +s32 XAxiPmon_GetMetrics(XAxiPmon *InstancePtr, u8 CounterNum, u8 *Metrics, + u8 *Slot); +void XAxiPmon_GetGlobalClkCounter(XAxiPmon *InstancePtr,u32 *CntHighValue, + u32 *CntLowValue); + +u32 XAxiPmon_GetMetricCounter(XAxiPmon *InstancePtr, u32 CounterNum); + +u32 XAxiPmon_GetSampledMetricCounter(XAxiPmon *InstancePtr, u32 CounterNum); + +u32 XAxiPmon_GetIncrementer(XAxiPmon *InstancePtr, u32 IncrementerNum); + +u32 XAxiPmon_GetSampledIncrementer(XAxiPmon *InstancePtr, u32 IncrementerNum); + +void XAxiPmon_SetSwDataReg(XAxiPmon *InstancePtr, u32 SwData); + +u32 XAxiPmon_GetSwDataReg(XAxiPmon *InstancePtr); + +s32 XAxiPmon_StartEventLog(XAxiPmon *InstancePtr, u32 FlagEnables); + +s32 XAxiPmon_StopEventLog(XAxiPmon *InstancePtr); + +s32 XAxiPmon_StartCounters(XAxiPmon *InstancePtr, u32 SampleInterval); + +s32 XAxiPmon_StopCounters(XAxiPmon *InstancePtr); + +void XAxiPmon_EnableMetricsCounter(XAxiPmon *InstancePtr); + +void XAxiPmon_DisableMetricsCounter(XAxiPmon *InstancePtr); + +void XAxiPmon_SetLogEnableRanges(XAxiPmon *InstancePtr, u32 CounterNum, + u16 RangeUpper, u16 RangeLower); + +void XAxiPmon_GetLogEnableRanges(XAxiPmon *InstancePtr, u32 CounterNum, + u16 *RangeUpper, u16 *RangeLower); + +void XAxiPmon_EnableEventLog(XAxiPmon *InstancePtr); + +void XAxiPmon_EnableMetricCounterTrigger(XAxiPmon *InstancePtr); + +void XAxiPmon_DisableMetricCounterTrigger(XAxiPmon *InstancePtr); + +void XAxiPmon_EnableEventLogTrigger(XAxiPmon *InstancePtr); + +void XAxiPmon_DisableEventLogTrigger(XAxiPmon *InstancePtr); + +const char * XAxiPmon_GetMetricName(u8 Metrics); + +void XAxiPmon_SetWriteId(XAxiPmon *InstancePtr, u32 WriteId); + +void XAxiPmon_SetReadId(XAxiPmon *InstancePtr, u32 ReadId); + +u32 XAxiPmon_GetWriteId(XAxiPmon *InstancePtr); + +u32 XAxiPmon_GetReadId(XAxiPmon *InstancePtr); + +void XAxiPmon_SetWrLatencyStart(XAxiPmon *InstancePtr, u8 Param); + +void XAxiPmon_SetWrLatencyEnd(XAxiPmon *InstancePtr, u8 Param); + +void XAxiPmon_SetRdLatencyStart(XAxiPmon *InstancePtr, u8 Param); + +void XAxiPmon_SetRdLatencyEnd(XAxiPmon *InstancePtr, u8 Param); + +u8 XAxiPmon_GetWrLatencyStart(XAxiPmon *InstancePtr); + +u8 XAxiPmon_GetWrLatencyEnd(XAxiPmon *InstancePtr); + +u8 XAxiPmon_GetRdLatencyStart(XAxiPmon *InstancePtr); + +u8 XAxiPmon_GetRdLatencyEnd(XAxiPmon *InstancePtr); + +void XAxiPmon_SetWriteIdMask(XAxiPmon *InstancePtr, u32 WrMask); + +void XAxiPmon_SetReadIdMask(XAxiPmon *InstancePtr, u32 RdMask); + +u32 XAxiPmon_GetWriteIdMask(XAxiPmon *InstancePtr); + +u32 XAxiPmon_GetReadIdMask(XAxiPmon *InstancePtr); + + +/** + * Functions in xaxipmon_selftest.c + */ +s32 XAxiPmon_SelfTest(XAxiPmon *InstancePtr); + +#ifdef __cplusplus +} +#endif + +#endif /* End of protection macro. */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_g.c new file mode 100644 index 000000000..a33878ef5 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_g.c @@ -0,0 +1,127 @@ + +/******************************************************************* +* +* CAUTION: This file is automatically generated by HSI. +* Version: +* DO NOT EDIT. +* +* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.* +*Permission is hereby granted, free of charge, to any person obtaining a copy +*of this software and associated documentation files (the Software), to deal +*in the Software without restriction, including without limitation the rights +*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +*copies of the Software, and to permit persons to whom the Software is +*furnished to do so, subject to the following conditions: +* +*The above copyright notice and this permission notice shall be included in +*all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +*(a) running on a Xilinx device, or +*(b) that interact with a Xilinx device through a bus or interconnect. +* +*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT +*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +* +*Except as contained in this notice, the name of the Xilinx shall not be used +*in advertising or otherwise to promote the sale, use or other dealings in +*this Software without prior written authorization from Xilinx. +* + +* +* Description: Driver configuration +* +*******************************************************************/ + +#include "xparameters.h" +#include "xaxipmon.h" + +/* +* The configuration table for devices +*/ + +XAxiPmon_Config XAxiPmon_ConfigTable[] = +{ + { + XPAR_PSU_APM_0_DEVICE_ID, + XPAR_PSU_APM_0_BASEADDR, + XPAR_PSU_APM_0_GLOBAL_COUNT_WIDTH, + XPAR_PSU_APM_0_METRICS_SAMPLE_COUNT_WIDTH, + XPAR_PSU_APM_0_ENABLE_EVENT_COUNT, + XPAR_PSU_APM_0_NUM_MONITOR_SLOTS, + XPAR_PSU_APM_0_NUM_OF_COUNTERS, + XPAR_PSU_APM_0_HAVE_SAMPLED_METRIC_CNT, + XPAR_PSU_APM_0_ENABLE_EVENT_LOG, + XPAR_PSU_APM_0_FIFO_AXIS_DEPTH, + XPAR_PSU_APM_0_FIFO_AXIS_TDATA_WIDTH, + XPAR_PSU_APM_0_FIFO_AXIS_TID_WIDTH, + XPAR_PSU_APM_0_METRIC_COUNT_SCALE, + XPAR_PSU_APM_0_ENABLE_ADVANCED, + XPAR_PSU_APM_0_ENABLE_PROFILE, + XPAR_PSU_APM_0_ENABLE_TRACE, + XPAR_PSU_APM_0_ENABLE_32BIT_FILTER_ID + }, + { + XPAR_PSU_APM_1_DEVICE_ID, + XPAR_PSU_APM_1_BASEADDR, + XPAR_PSU_APM_1_GLOBAL_COUNT_WIDTH, + XPAR_PSU_APM_1_METRICS_SAMPLE_COUNT_WIDTH, + XPAR_PSU_APM_1_ENABLE_EVENT_COUNT, + XPAR_PSU_APM_1_NUM_MONITOR_SLOTS, + XPAR_PSU_APM_1_NUM_OF_COUNTERS, + XPAR_PSU_APM_1_HAVE_SAMPLED_METRIC_CNT, + XPAR_PSU_APM_1_ENABLE_EVENT_LOG, + XPAR_PSU_APM_1_FIFO_AXIS_DEPTH, + XPAR_PSU_APM_1_FIFO_AXIS_TDATA_WIDTH, + XPAR_PSU_APM_1_FIFO_AXIS_TID_WIDTH, + XPAR_PSU_APM_1_METRIC_COUNT_SCALE, + XPAR_PSU_APM_1_ENABLE_ADVANCED, + XPAR_PSU_APM_1_ENABLE_PROFILE, + XPAR_PSU_APM_1_ENABLE_TRACE, + XPAR_PSU_APM_1_ENABLE_32BIT_FILTER_ID + }, + { + XPAR_PSU_APM_2_DEVICE_ID, + XPAR_PSU_APM_2_BASEADDR, + XPAR_PSU_APM_2_GLOBAL_COUNT_WIDTH, + XPAR_PSU_APM_2_METRICS_SAMPLE_COUNT_WIDTH, + XPAR_PSU_APM_2_ENABLE_EVENT_COUNT, + XPAR_PSU_APM_2_NUM_MONITOR_SLOTS, + XPAR_PSU_APM_2_NUM_OF_COUNTERS, + XPAR_PSU_APM_2_HAVE_SAMPLED_METRIC_CNT, + XPAR_PSU_APM_2_ENABLE_EVENT_LOG, + XPAR_PSU_APM_2_FIFO_AXIS_DEPTH, + XPAR_PSU_APM_2_FIFO_AXIS_TDATA_WIDTH, + XPAR_PSU_APM_2_FIFO_AXIS_TID_WIDTH, + XPAR_PSU_APM_2_METRIC_COUNT_SCALE, + XPAR_PSU_APM_2_ENABLE_ADVANCED, + XPAR_PSU_APM_2_ENABLE_PROFILE, + XPAR_PSU_APM_2_ENABLE_TRACE, + XPAR_PSU_APM_2_ENABLE_32BIT_FILTER_ID + }, + { + XPAR_PSU_APM_5_DEVICE_ID, + XPAR_PSU_APM_5_BASEADDR, + XPAR_PSU_APM_5_GLOBAL_COUNT_WIDTH, + XPAR_PSU_APM_5_METRICS_SAMPLE_COUNT_WIDTH, + XPAR_PSU_APM_5_ENABLE_EVENT_COUNT, + XPAR_PSU_APM_5_NUM_MONITOR_SLOTS, + XPAR_PSU_APM_5_NUM_OF_COUNTERS, + XPAR_PSU_APM_5_HAVE_SAMPLED_METRIC_CNT, + XPAR_PSU_APM_5_ENABLE_EVENT_LOG, + XPAR_PSU_APM_5_FIFO_AXIS_DEPTH, + XPAR_PSU_APM_5_FIFO_AXIS_TDATA_WIDTH, + XPAR_PSU_APM_5_FIFO_AXIS_TID_WIDTH, + XPAR_PSU_APM_5_METRIC_COUNT_SCALE, + XPAR_PSU_APM_5_ENABLE_ADVANCED, + XPAR_PSU_APM_5_ENABLE_PROFILE, + XPAR_PSU_APM_5_ENABLE_TRACE, + XPAR_PSU_APM_5_ENABLE_32BIT_FILTER_ID + } +}; + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_hw.h new file mode 100644 index 000000000..68ed57aaf --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_hw.h @@ -0,0 +1,571 @@ +/****************************************************************************** +* +* Copyright (C) 2012 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/****************************************************************************/ +/** +* +* @file xaxipmon_hw.h +* @addtogroup axipmon_v6_3 +* @{ +* +* This header file contains identifiers and basic driver functions (or +* macros) that can be used to access the AXI Performance Monitor. +* +* Refer to the device specification for more information about this driver. +* +* @note None. +* +* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- -----  -------- -----------------------------------------------------
+* 1.00a bss    02/27/12 First release
+* 2.00a bss    06/23/12 Updated to support v2_00a version of IP.
+* 3.00a bss    09/03/12 Deleted XAPM_AGENT_OFFSET Macro to support
+*			v2_01a version of IP.
+* 3.01a bss    10/25/12 To support new version of IP:
+*			Added XAPM_MCXLOGEN_OFFSET and
+*			XAPM_CR_EXTERNAL_TRIGGER_MASK macros.
+* 4.00a bss    01/17/13 To support new version of IP:
+*			Added XAPM_LATENCYID_OFFSET,
+*			XAPM_CR_EVTLOG_EXTTRIGGER_MASK,
+*			XAPM_LATENCYID_RID_MASK and XAPM_LATENCYID_WID_MASK
+* 5.00a bss   08/26/13  To support new version of IP:
+*			Added Macros XAPM_MC10_OFFSET to XAPM_MC47_OFFSET,
+*			XAPM_SMC10_OFFSET to XAPM_SMC47_OFFSET.
+*			Added macro XAPM_IDMASK_OFFSET, XAPM_SR_OFFSET.
+*			Added XAPM_CR_IDFILTER_ENABLE_MASK,
+*			XAPM_CR_WRLATENCY_START_MASK,
+*			XAPM_CR_WRLATENCY_END_MASK,
+*			XAPM_CR_RDLATENCY_START_MASK,
+*			XAPM_CR_RDLATENCY_END_MASK, XAPM_MASKID_RID_MASK
+*			and XAPM_MASKID_WID_MASK macros.
+*			Renamed:
+*			XAPM_LATENCYID_OFFSET to XAPM_ID_OFFSET,
+*			XAPM_LATENCYID_RID_MASK to XAPM_ID_RID_MASK,
+*			XAPM_LATENCYID_WID_MASK to XAPM_ID_WID_MASK.
+*
+* 6.2  bss  03/02/15 Added XAPM_RID_OFFSET and XAPM_RIDMASK_OFFSET to support
+*					 Zynq MP APM.
+*
+* 6.3  kvn  07/02/15 Modified code according to MISRA-C:2012 guidelines.
+*
+* +*****************************************************************************/ +#ifndef XAXIPMON_HW_H /* Prevent circular inclusions */ +#define XAXIPMON_HW_H /* by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files ********************************/ + +#include "xil_types.h" +#include "xil_assert.h" +#include "xil_io.h" + +/************************** Constant Definitions ****************************/ + + +/**@name Register offsets of AXIMONITOR in the Device Config + * + * The following constants provide access to each of the registers of the + * AXI PERFORMANCE MONITOR device. + * @{ + */ + +#define XAPM_GCC_HIGH_OFFSET 0x00000000U /**< Global Clock Counter + 32 to 63 bits */ +#define XAPM_GCC_LOW_OFFSET 0x00000004U /**< Global Clock Counter Lower + 0-31 bits */ +#define XAPM_SI_HIGH_OFFSET 0x00000020U /**< Sample Interval MSB */ +#define XAPM_SI_LOW_OFFSET 0x00000024U /**< Sample Interval LSB */ +#define XAPM_SICR_OFFSET 0x00000028U /**< Sample Interval Control + Register */ +#define XAPM_SR_OFFSET 0x0000002CU /**< Sample Register */ +#define XAPM_GIE_OFFSET 0x00000030U /**< Global Interrupt Enable + Register */ +#define XAPM_IE_OFFSET 0x00000034U /**< Interrupt Enable Register */ +#define XAPM_IS_OFFSET 0x00000038U /**< Interrupt Status Register */ + +#define XAPM_MSR0_OFFSET 0x00000044U /**< Metric Selector 0 Register */ +#define XAPM_MSR1_OFFSET 0x00000048U /**< Metric Selector 1 Register */ +#define XAPM_MSR2_OFFSET 0x0000004CU /**< Metric Selector 2 Register */ + +#define XAPM_MC0_OFFSET 0x00000100U /**< Metric Counter 0 Register */ +#define XAPM_INC0_OFFSET 0x00000104U /**< Incrementer 0 Register */ +#define XAPM_RANGE0_OFFSET 0x00000108U /**< Range 0 Register */ +#define XAPM_MC0LOGEN_OFFSET 0x0000010CU /**< Metric Counter 0 + Log Enable Register */ +#define XAPM_MC1_OFFSET 0x00000110U /**< Metric Counter 1 Register */ +#define XAPM_INC1_OFFSET 0x00000114U /**< Incrementer 1 Register */ +#define XAPM_RANGE1_OFFSET 0x00000118U /**< Range 1 Register */ +#define XAPM_MC1LOGEN_OFFSET 0x0000011CU /**< Metric Counter 1 + Log Enable Register */ +#define XAPM_MC2_OFFSET 0x00000120U /**< Metric Counter 2 Register */ +#define XAPM_INC2_OFFSET 0x00000124U /**< Incrementer 2 Register */ +#define XAPM_RANGE2_OFFSET 0x00000128U /**< Range 2 Register */ +#define XAPM_MC2LOGEN_OFFSET 0x0000012CU /**< Metric Counter 2 + Log Enable Register */ +#define XAPM_MC3_OFFSET 0x00000130U /**< Metric Counter 3 Register */ +#define XAPM_INC3_OFFSET 0x00000134U /**< Incrementer 3 Register */ +#define XAPM_RANGE3_OFFSET 0x00000138U /**< Range 3 Register */ +#define XAPM_MC3LOGEN_OFFSET 0x0000013CU /**< Metric Counter 3 + Log Enable Register */ +#define XAPM_MC4_OFFSET 0x00000140U /**< Metric Counter 4 Register */ +#define XAPM_INC4_OFFSET 0x00000144U /**< Incrementer 4 Register */ +#define XAPM_RANGE4_OFFSET 0x00000148U /**< Range 4 Register */ +#define XAPM_MC4LOGEN_OFFSET 0x0000014CU /**< Metric Counter 4 + Log Enable Register */ +#define XAPM_MC5_OFFSET 0x00000150U /**< Metric Counter 5 + Register */ +#define XAPM_INC5_OFFSET 0x00000154U /**< Incrementer 5 Register */ +#define XAPM_RANGE5_OFFSET 0x00000158U /**< Range 5 Register */ +#define XAPM_MC5LOGEN_OFFSET 0x0000015CU /**< Metric Counter 5 + Log Enable Register */ +#define XAPM_MC6_OFFSET 0x00000160U /**< Metric Counter 6 + Register */ +#define XAPM_INC6_OFFSET 0x00000164U /**< Incrementer 6 Register */ +#define XAPM_RANGE6_OFFSET 0x00000168U /**< Range 6 Register */ +#define XAPM_MC6LOGEN_OFFSET 0x0000016CU /**< Metric Counter 6 + Log Enable Register */ +#define XAPM_MC7_OFFSET 0x00000170U /**< Metric Counter 7 + Register */ +#define XAPM_INC7_OFFSET 0x00000174U /**< Incrementer 7 Register */ +#define XAPM_RANGE7_OFFSET 0x00000178U /**< Range 7 Register */ +#define XAPM_MC7LOGEN_OFFSET 0x0000017CU /**< Metric Counter 7 + Log Enable Register */ +#define XAPM_MC8_OFFSET 0x00000180U /**< Metric Counter 8 + Register */ +#define XAPM_INC8_OFFSET 0x00000184U /**< Incrementer 8 Register */ +#define XAPM_RANGE8_OFFSET 0x00000188U /**< Range 8 Register */ +#define XAPM_MC8LOGEN_OFFSET 0x0000018CU /**< Metric Counter 8 + Log Enable Register */ +#define XAPM_MC9_OFFSET 0x00000190U /**< Metric Counter 9 + Register */ +#define XAPM_INC9_OFFSET 0x00000194U /**< Incrementer 9 Register */ +#define XAPM_RANGE9_OFFSET 0x00000198U /**< Range 9 Register */ +#define XAPM_MC9LOGEN_OFFSET 0x0000019CU /**< Metric Counter 9 + Log Enable Register */ +#define XAPM_SMC0_OFFSET 0x00000200U /**< Sampled Metric Counter + 0 Register */ +#define XAPM_SINC0_OFFSET 0x00000204U /**< Sampled Incrementer + 0 Register */ +#define XAPM_SMC1_OFFSET 0x00000210U /**< Sampled Metric Counter + 1 Register */ +#define XAPM_SINC1_OFFSET 0x00000214U /**< Sampled Incrementer + 1 Register */ +#define XAPM_SMC2_OFFSET 0x00000220U /**< Sampled Metric Counter + 2 Register */ +#define XAPM_SINC2_OFFSET 0x00000224U /**< Sampled Incrementer + 2 Register */ +#define XAPM_SMC3_OFFSET 0x00000230U /**< Sampled Metric Counter + 3 Register */ +#define XAPM_SINC3_OFFSET 0x00000234U /**< Sampled Incrementer + 3 Register */ +#define XAPM_SMC4_OFFSET 0x00000240U /**< Sampled Metric Counter + 4 Register */ +#define XAPM_SINC4_OFFSET 0x00000244U /**< Sampled Incrementer + 4 Register */ +#define XAPM_SMC5_OFFSET 0x00000250U /**< Sampled Metric Counter + 5 Register */ +#define XAPM_SINC5_OFFSET 0x00000254U /**< Sampled Incrementer + 5 Register */ +#define XAPM_SMC6_OFFSET 0x00000260U /**< Sampled Metric Counter + 6 Register */ +#define XAPM_SINC6_OFFSET 0x00000264U /**< Sampled Incrementer + 6 Register */ +#define XAPM_SMC7_OFFSET 0x00000270U /**< Sampled Metric Counter + 7 Register */ +#define XAPM_SINC7_OFFSET 0x00000274U /**< Sampled Incrementer + 7 Register */ +#define XAPM_SMC8_OFFSET 0x00000280U /**< Sampled Metric Counter + 8 Register */ +#define XAPM_SINC8_OFFSET 0x00000284U /**< Sampled Incrementer + 8 Register */ +#define XAPM_SMC9_OFFSET 0x00000290U /**< Sampled Metric Counter + 9 Register */ +#define XAPM_SINC9_OFFSET 0x00000294U /**< Sampled Incrementer + 9 Register */ + +#define XAPM_MC10_OFFSET 0x000001A0U /**< Metric Counter 10 + Register */ +#define XAPM_MC11_OFFSET 0x000001B0U /**< Metric Counter 11 + Register */ +#define XAPM_MC12_OFFSET 0x00000500U /**< Metric Counter 12 + Register */ +#define XAPM_MC13_OFFSET 0x00000510U /**< Metric Counter 13 + Register */ +#define XAPM_MC14_OFFSET 0x00000520U /**< Metric Counter 14 + Register */ +#define XAPM_MC15_OFFSET 0x00000530U /**< Metric Counter 15 + Register */ +#define XAPM_MC16_OFFSET 0x00000540U /**< Metric Counter 16 + Register */ +#define XAPM_MC17_OFFSET 0x00000550U /**< Metric Counter 17 + Register */ +#define XAPM_MC18_OFFSET 0x00000560U /**< Metric Counter 18 + Register */ +#define XAPM_MC19_OFFSET 0x00000570U /**< Metric Counter 19 + Register */ +#define XAPM_MC20_OFFSET 0x00000580U /**< Metric Counter 20 + Register */ +#define XAPM_MC21_OFFSET 0x00000590U /**< Metric Counter 21 + Register */ +#define XAPM_MC22_OFFSET 0x000005A0U /**< Metric Counter 22 + Register */ +#define XAPM_MC23_OFFSET 0x000005B0U /**< Metric Counter 23 + Register */ +#define XAPM_MC24_OFFSET 0x00000700U /**< Metric Counter 24 + Register */ +#define XAPM_MC25_OFFSET 0x00000710U /**< Metric Counter 25 + Register */ +#define XAPM_MC26_OFFSET 0x00000720U /**< Metric Counter 26 + Register */ +#define XAPM_MC27_OFFSET 0x00000730U /**< Metric Counter 27 + Register */ +#define XAPM_MC28_OFFSET 0x00000740U /**< Metric Counter 28 + Register */ +#define XAPM_MC29_OFFSET 0x00000750U /**< Metric Counter 29 + Register */ +#define XAPM_MC30_OFFSET 0x00000760U /**< Metric Counter 30 + Register */ +#define XAPM_MC31_OFFSET 0x00000770U /**< Metric Counter 31 + Register */ +#define XAPM_MC32_OFFSET 0x00000780U /**< Metric Counter 32 + Register */ +#define XAPM_MC33_OFFSET 0x00000790U /**< Metric Counter 33 + Register */ +#define XAPM_MC34_OFFSET 0x000007A0U /**< Metric Counter 34 + Register */ +#define XAPM_MC35_OFFSET 0x000007B0U /**< Metric Counter 35 + Register */ +#define XAPM_MC36_OFFSET 0x00000900U /**< Metric Counter 36 + Register */ +#define XAPM_MC37_OFFSET 0x00000910U /**< Metric Counter 37 + Register */ +#define XAPM_MC38_OFFSET 0x00000920U /**< Metric Counter 38 + Register */ +#define XAPM_MC39_OFFSET 0x00000930U /**< Metric Counter 39 + Register */ +#define XAPM_MC40_OFFSET 0x00000940U /**< Metric Counter 40 + Register */ +#define XAPM_MC41_OFFSET 0x00000950U /**< Metric Counter 41 + Register */ +#define XAPM_MC42_OFFSET 0x00000960U /**< Metric Counter 42 + Register */ +#define XAPM_MC43_OFFSET 0x00000970U /**< Metric Counter 43 + Register */ +#define XAPM_MC44_OFFSET 0x00000980U /**< Metric Counter 44 + Register */ +#define XAPM_MC45_OFFSET 0x00000990U /**< Metric Counter 45 + Register */ +#define XAPM_MC46_OFFSET 0x000009A0U /**< Metric Counter 46 + Register */ +#define XAPM_MC47_OFFSET 0x000009B0U /**< Metric Counter 47 + Register */ + +#define XAPM_SMC10_OFFSET 0x000002A0U /**< Sampled Metric Counter + 10 Register */ +#define XAPM_SMC11_OFFSET 0x000002B0U /**< Sampled Metric Counter + 11 Register */ +#define XAPM_SMC12_OFFSET 0x00000600U /**< Sampled Metric Counter + 12 Register */ +#define XAPM_SMC13_OFFSET 0x00000610U /**< Sampled Metric Counter + 13 Register */ +#define XAPM_SMC14_OFFSET 0x00000620U /**< Sampled Metric Counter + 14 Register */ +#define XAPM_SMC15_OFFSET 0x00000630U /**< Sampled Metric Counter + 15 Register */ +#define XAPM_SMC16_OFFSET 0x00000640U /**< Sampled Metric Counter + 16 Register */ +#define XAPM_SMC17_OFFSET 0x00000650U /**< Sampled Metric Counter + 17 Register */ +#define XAPM_SMC18_OFFSET 0x00000660U /**< Sampled Metric Counter + 18 Register */ +#define XAPM_SMC19_OFFSET 0x00000670U /**< Sampled Metric Counter + 19 Register */ +#define XAPM_SMC20_OFFSET 0x00000680U /**< Sampled Metric Counter + 20 Register */ +#define XAPM_SMC21_OFFSET 0x00000690U /**< Sampled Metric Counter + 21 Register */ +#define XAPM_SMC22_OFFSET 0x000006A0U /**< Sampled Metric Counter + 22 Register */ +#define XAPM_SMC23_OFFSET 0x000006B0U /**< Sampled Metric Counter + 23 Register */ +#define XAPM_SMC24_OFFSET 0x00000800U /**< Sampled Metric Counter + 24 Register */ +#define XAPM_SMC25_OFFSET 0x00000810U /**< Sampled Metric Counter + 25 Register */ +#define XAPM_SMC26_OFFSET 0x00000820U /**< Sampled Metric Counter + 26 Register */ +#define XAPM_SMC27_OFFSET 0x00000830U /**< Sampled Metric Counter + 27 Register */ +#define XAPM_SMC28_OFFSET 0x00000840U /**< Sampled Metric Counter + 28 Register */ +#define XAPM_SMC29_OFFSET 0x00000850U /**< Sampled Metric Counter + 29 Register */ +#define XAPM_SMC30_OFFSET 0x00000860U /**< Sampled Metric Counter + 30 Register */ +#define XAPM_SMC31_OFFSET 0x00000870U /**< Sampled Metric Counter + 31 Register */ +#define XAPM_SMC32_OFFSET 0x00000880U /**< Sampled Metric Counter + 32 Register */ +#define XAPM_SMC33_OFFSET 0x00000890U /**< Sampled Metric Counter + 33 Register */ +#define XAPM_SMC34_OFFSET 0x000008A0U /**< Sampled Metric Counter + 34 Register */ +#define XAPM_SMC35_OFFSET 0x000008B0U /**< Sampled Metric Counter + 35 Register */ +#define XAPM_SMC36_OFFSET 0x00000A00U /**< Sampled Metric Counter + 36 Register */ +#define XAPM_SMC37_OFFSET 0x00000A10U /**< Sampled Metric Counter + 37 Register */ +#define XAPM_SMC38_OFFSET 0x00000A20U /**< Sampled Metric Counter + 38 Register */ +#define XAPM_SMC39_OFFSET 0x00000A30U /**< Sampled Metric Counter + 39 Register */ +#define XAPM_SMC40_OFFSET 0x00000A40U /**< Sampled Metric Counter + 40 Register */ +#define XAPM_SMC41_OFFSET 0x00000A50U /**< Sampled Metric Counter + 41 Register */ +#define XAPM_SMC42_OFFSET 0x00000A60U /**< Sampled Metric Counter + 42 Register */ +#define XAPM_SMC43_OFFSET 0x00000A70U /**< Sampled Metric Counter + 43 Register */ +#define XAPM_SMC44_OFFSET 0x00000A80U /**< Sampled Metric Counter + 44 Register */ +#define XAPM_SMC45_OFFSET 0x00000A90U /**< Sampled Metric Counter + 45 Register */ +#define XAPM_SMC46_OFFSET 0x00000AA0U /**< Sampled Metric Counter + 46 Register */ +#define XAPM_SMC47_OFFSET 0x00000AB0U /**< Sampled Metric Counter + 47 Register */ + +#define XAPM_CTL_OFFSET 0x00000300U /**< Control Register */ + +#define XAPM_ID_OFFSET 0x00000304U /**< Latency ID Register */ + +#define XAPM_IDMASK_OFFSET 0x00000308U /**< ID Mask Register */ + +#define XAPM_RID_OFFSET 0x0000030CU /**< Latency Write ID Register */ + +#define XAPM_RIDMASK_OFFSET 0x00000310U /**< Read ID Mask Register */ + +#define XAPM_FEC_OFFSET 0x00000400U /**< Flag Enable + Control Register */ + +#define XAPM_SWD_OFFSET 0x00000404U /**< Software-written + Data Register */ + +/* @} */ + +/** + * @name AXI Monitor Sample Interval Control Register mask(s) + * @{ + */ + +#define XAPM_SICR_MCNTR_RST_MASK 0x00000100U /**< Enable the Metric + Counter Reset */ +#define XAPM_SICR_LOAD_MASK 0x00000002U /**< Load the Sample Interval + * Register Value into the + * counter */ +#define XAPM_SICR_ENABLE_MASK 0x00000001U /**< Enable the downcounter */ + +/*@}*/ + + +/** @name Interrupt Status/Enable Register Bit Definitions and Masks + * @{ + */ + +#define XAPM_IXR_MC9_OVERFLOW_MASK 0x00001000U /**< Metric Counter 9 + * Overflow> */ +#define XAPM_IXR_MC8_OVERFLOW_MASK 0x00000800U /**< Metric Counter 8 + * Overflow> */ +#define XAPM_IXR_MC7_OVERFLOW_MASK 0x00000400U /**< Metric Counter 7 + * Overflow> */ +#define XAPM_IXR_MC6_OVERFLOW_MASK 0x00000200U /**< Metric Counter 6 + * Overflow> */ +#define XAPM_IXR_MC5_OVERFLOW_MASK 0x00000100U /**< Metric Counter 5 + * Overflow> */ +#define XAPM_IXR_MC4_OVERFLOW_MASK 0x00000080U /**< Metric Counter 4 + * Overflow> */ +#define XAPM_IXR_MC3_OVERFLOW_MASK 0x00000040U /**< Metric Counter 3 + * Overflow> */ +#define XAPM_IXR_MC2_OVERFLOW_MASK 0x00000020U /**< Metric Counter 2 + * Overflow> */ +#define XAPM_IXR_MC1_OVERFLOW_MASK 0x00000010U /**< Metric Counter 1 + * Overflow> */ +#define XAPM_IXR_MC0_OVERFLOW_MASK 0x00000008U /**< Metric Counter 0 + * Overflow> */ +#define XAPM_IXR_FIFO_FULL_MASK 0x00000004U /**< Event Log FIFO + * full> */ +#define XAPM_IXR_SIC_OVERFLOW_MASK 0x00000002U /**< Sample Interval + * Counter Overflow> */ +#define XAPM_IXR_GCC_OVERFLOW_MASK 0x00000001U /**< Global Clock Counter + * Overflow> */ +#define XAPM_IXR_ALL_MASK (XAPM_IXR_SIC_OVERFLOW_MASK | \ + XAPM_IXR_GCC_OVERFLOW_MASK | \ + XAPM_IXR_FIFO_FULL_MASK | \ + XAPM_IXR_MC0_OVERFLOW_MASK | \ + XAPM_IXR_MC1_OVERFLOW_MASK | \ + XAPM_IXR_MC2_OVERFLOW_MASK | \ + XAPM_IXR_MC3_OVERFLOW_MASK | \ + XAPM_IXR_MC4_OVERFLOW_MASK | \ + XAPM_IXR_MC5_OVERFLOW_MASK | \ + XAPM_IXR_MC6_OVERFLOW_MASK | \ + XAPM_IXR_MC7_OVERFLOW_MASK | \ + XAPM_IXR_MC8_OVERFLOW_MASK | \ + XAPM_IXR_MC9_OVERFLOW_MASK) +/* @} */ + +/** + * @name AXI Monitor Control Register mask(s) + * @{ + */ + +#define XAPM_CR_FIFO_RESET_MASK 0x02000000U + /**< FIFO Reset */ +#define XAPM_CR_GCC_RESET_MASK 0x00020000U + /**< Global Clk + Counter Reset */ +#define XAPM_CR_GCC_ENABLE_MASK 0x00010000U + /**< Global Clk + Counter Enable */ +#define XAPM_CR_EVTLOG_EXTTRIGGER_MASK 0x00000200U + /**< Enable External trigger + to start event Log */ +#define XAPM_CR_EVENTLOG_ENABLE_MASK 0x00000100U + /**< Event Log Enable */ + +#define XAPM_CR_RDLATENCY_END_MASK 0x00000080U + /**< Write Latency + End point */ +#define XAPM_CR_RDLATENCY_START_MASK 0x00000040U + /**< Read Latency + Start point */ +#define XAPM_CR_WRLATENCY_END_MASK 0x00000020U + /**< Write Latency + End point */ +#define XAPM_CR_WRLATENCY_START_MASK 0x00000010U + /**< Write Latency + Start point */ +#define XAPM_CR_IDFILTER_ENABLE_MASK 0x00000008U + /**< ID Filter Enable */ + +#define XAPM_CR_MCNTR_EXTTRIGGER_MASK 0x00000004U + /**< Enable External + trigger to start + Metric Counters */ +#define XAPM_CR_MCNTR_RESET_MASK 0x00000002U + /**< Metrics Counter + Reset */ +#define XAPM_CR_MCNTR_ENABLE_MASK 0x00000001U + /**< Metrics Counter + Enable */ +/*@}*/ + +/** + * @name AXI Monitor ID Register mask(s) + * @{ + */ + +#define XAPM_ID_RID_MASK 0xFFFF0000U /**< Read ID */ + +#define XAPM_ID_WID_MASK 0x0000FFFFU /**< Write ID */ + +/*@}*/ + +/** + * @name AXI Monitor ID Mask Register mask(s) + * @{ + */ + +#define XAPM_MASKID_RID_MASK 0xFFFF0000U /**< Read ID Mask */ + +#define XAPM_MASKID_WID_MASK 0x0000FFFFU /**< Write ID Mask*/ + +/*@}*/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/** +* +* Read a register of the AXI Performance Monitor device. This macro provides +* register access to all registers using the register offsets defined above. +* +* @param BaseAddress contains the base address of the device. +* @param RegOffset is the offset of the register to read. +* +* @return The contents of the register. +* +* @note C-style Signature: +* u32 XAxiPmon_ReadReg(u32 BaseAddress, u32 RegOffset); +* +******************************************************************************/ +#define XAxiPmon_ReadReg(BaseAddress, RegOffset) \ + (Xil_In32((BaseAddress) + (RegOffset))) + +/*****************************************************************************/ +/** +* +* Write a register of the AXI Performance Monitor device. This macro provides +* register access to all registers using the register offsets defined above. +* +* @param BaseAddress contains the base address of the device. +* @param RegOffset is the offset of the register to write. +* @param Data is the value to write to the register. +* +* @return None. +* +* @note C-style Signature: +* void XAxiPmon_WriteReg(u32 BaseAddress, +* u32 RegOffset,u32 Data) +* +******************************************************************************/ +#define XAxiPmon_WriteReg(BaseAddress, RegOffset, Data) \ + (Xil_Out32((BaseAddress) + (RegOffset), (Data))) + +/************************** Function Prototypes ******************************/ + +#ifdef __cplusplus +} +#endif + +#endif /* End of protection macro. */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_selftest.c new file mode 100644 index 000000000..df2a9da66 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_selftest.c @@ -0,0 +1,152 @@ +/****************************************************************************** +* +* Copyright (C) 2012 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xaxipmon_selftest.c +* @addtogroup axipmon_v6_3 +* @{ +* +* This file contains a diagnostic self test function for the XAxiPmon driver. +* The self test function does a simple read/write test of the Alarm Threshold +* Register. +* +* See XAxiPmon.h for more information. +* +* @note None. +* +* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- -----  -------- -----------------------------------------------------
+* 1.00a bss  02/24/12 First release
+* 2.00a bss  06/23/12 Updated to support v2_00a version of IP.
+* 6.3   kvn  07/02/15 Modified code according to MISRA-C:2012 guidelines.
+*
+* +*****************************************************************************/ + +/***************************** Include Files ********************************/ + +#include "xaxipmon.h" + +/************************** Constant Definitions ****************************/ + +/* + * The following constant defines the test value to be written + * to the Range Registers of Incrementers + */ + +#define XAPM_TEST_RANGEUPPER_VALUE 16U /**< Test Value for Upper Range */ +#define XAPM_TEST_RANGELOWER_VALUE 8U /**< Test Value for Lower Range */ + +/**************************** Type Definitions ******************************/ + +/***************** Macros (Inline Functions) Definitions ********************/ + +/************************** Variable Definitions ****************************/ + +/************************** Function Prototypes *****************************/ + +/*****************************************************************************/ +/** +* +* Run a self-test on the driver/device. The test +* - Resets the device, +* - Writes a value into the Range Registers of Incrementer 0 and reads +* it back for comparison. +* - Resets the device again. +* +* +* @param InstancePtr is a pointer to the XAxiPmon instance. +* +* @return +* - XST_SUCCESS if the value read from the Range Register of +* Incrementer 0 is the same as the value written. +* - XST_FAILURE Otherwise +* +* @note This is a destructive test in that resets of the device are +* performed. Refer to the device specification for the +* device status after the reset operation. +* +******************************************************************************/ +s32 XAxiPmon_SelfTest(XAxiPmon *InstancePtr) +{ + s32 Status; + u16 RangeUpper = 0U; + u16 RangeLower = 0U; + + /* + * Assert the argument + */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + + /* + * Reset the device to get it back to its default state + */ + (void)XAxiPmon_ResetMetricCounter(InstancePtr); + XAxiPmon_ResetGlobalClkCounter(InstancePtr); + + /* + * Write a value into the Incrementer register and + * read it back, and do the comparison + */ + XAxiPmon_SetIncrementerRange(InstancePtr, XAPM_INCREMENTER_0, + XAPM_TEST_RANGEUPPER_VALUE, + XAPM_TEST_RANGELOWER_VALUE); + + XAxiPmon_GetIncrementerRange(InstancePtr, XAPM_INCREMENTER_0, + &RangeUpper, &RangeLower); + + if ((RangeUpper == XAPM_TEST_RANGEUPPER_VALUE) && + (RangeLower == XAPM_TEST_RANGELOWER_VALUE)) { + Status = XST_SUCCESS; + } else { + Status = XST_FAILURE; + } + + /* + * Reset the device again to its default state. + */ + (void)XAxiPmon_ResetMetricCounter(InstancePtr); + XAxiPmon_ResetGlobalClkCounter(InstancePtr); + + /* + * Return the test result. + */ + return Status; +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_sinit.c new file mode 100644 index 000000000..737d80b48 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/axipmon_v6_4/src/xaxipmon_sinit.c @@ -0,0 +1,104 @@ +/****************************************************************************** +* +* Copyright (C) 2012 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xaxipmon_sinit.c +* @addtogroup axipmon_v6_3 +* @{ +* +* This file contains the implementation of the XAxiPmon driver's static +* initialization functionality. +* +* @note None. +* +* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- -----  -------- -----------------------------------------------------
+* 1.00a bss  02/27/12 First release
+* 2.00a bss  06/23/12 Updated to support v2_00a version of IP.
+* 6.3   kvn  07/02/15 Modified code according to MISRA-C:2012 guidelines.
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xparameters.h" +#include "xaxipmon.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +/************************** Variable Definitions *****************************/ +extern XAxiPmon_Config XAxiPmon_ConfigTable[]; + +/*****************************************************************************/ +/** +* +* This function looks up the device configuration based on the unique device ID. +* The table XAxiPmon_ConfigTable contains the configuration info for each device +* in the system. +* +* @param DeviceId contains the ID of the device for which the +* device configuration pointer is to be returned. +* +* @return +* - A pointer to the configuration found. +* - NULL if the specified device ID was not found. +* +* @note None. +* +******************************************************************************/ +XAxiPmon_Config *XAxiPmon_LookupConfig(u16 DeviceId) +{ + XAxiPmon_Config *CfgPtr = NULL; + u32 Index; + + for (Index=0U; Index < (u32)XPAR_XAXIPMON_NUM_INSTANCES; Index++) { + if (XAxiPmon_ConfigTable[Index].DeviceId == DeviceId) { + CfgPtr = &XAxiPmon_ConfigTable[Index]; + break; + } + } + + return (XAxiPmon_Config *)CfgPtr; +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/Makefile new file mode 100644 index 000000000..55565709b --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/Makefile @@ -0,0 +1,40 @@ +COMPILER= +ARCHIVER= +CP=cp +COMPILER_FLAGS= +EXTRA_COMPILER_FLAGS= +LIB=libxil.a + +CC_FLAGS = $(COMPILER_FLAGS) +ECC_FLAGS = $(EXTRA_COMPILER_FLAGS) + +RELEASEDIR=../../../lib +INCLUDEDIR=../../../include +INCLUDES=-I./. -I${INCLUDEDIR} + +OUTS = *.o + +LIBSOURCES:=*.c +INCLUDEFILES:=*.h + +OBJECTS = $(addsuffix .o, $(basename $(wildcard *.c))) + +libs: banner xcanps_libs clean + +%.o: %.c + ${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $< + +banner: + echo "Compiling canps" + +xcanps_libs: ${OBJECTS} + $(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS} + +.PHONY: include +include: xcanps_includes + +xcanps_includes: + ${CP} ${INCLUDEFILES} ${INCLUDEDIR} + +clean: + rm -rf ${OBJECTS} diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps.c new file mode 100644 index 000000000..243b3a81b --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps.c @@ -0,0 +1,1205 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcanps.c +* @addtogroup canps_v3_0 +* @{ +* +* Functions in this file are the minimum required functions for the XCanPs +* driver. See xcanps.h for a detailed description of the driver. +* +* @note None. +* +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00a xd/sv  01/12/10 First release
+* 1.01a bss    12/27/11 Added the APIs XCanPs_SetTxIntrWatermark and
+* 			XCanPs_GetTxIntrWatermark.
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcanps.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Variable Definitions *****************************/ + +/************************** Function Prototypes ******************************/ + +static void StubHandler(void); + +/*****************************************************************************/ +/* +* +* This function initializes a XCanPs instance/driver. +* +* The initialization entails: +* - Initialize all members of the XCanPs structure. +* - Reset the CAN device. The CAN device will enter Configuration Mode +* immediately after the reset is finished. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param ConfigPtr points to the XCanPs device configuration structure. +* @param EffectiveAddr is the device base address in the virtual memory +* address space. If the address translation is not used then the +* physical address is passed. +* Unexpected errors may occur if the address mapping is changed +* after this function is invoked. +* +* @return XST_SUCCESS always. +* +* @note None. +* +******************************************************************************/ +s32 XCanPs_CfgInitialize(XCanPs *InstancePtr, XCanPs_Config *ConfigPtr, + u32 EffectiveAddr) +{ + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(ConfigPtr != NULL); + + /* + * Set some default values for instance data, don't indicate the device + * is ready to use until everything has been initialized successfully. + */ + InstancePtr->IsReady = 0U; + InstancePtr->CanConfig.BaseAddr = EffectiveAddr; + InstancePtr->CanConfig.DeviceId = ConfigPtr->DeviceId; + + /* + * Set all handlers to stub values, let user configure this data later. + */ + InstancePtr->SendHandler = (XCanPs_SendRecvHandler) StubHandler; + InstancePtr->RecvHandler = (XCanPs_SendRecvHandler) StubHandler; + InstancePtr->ErrorHandler = (XCanPs_ErrorHandler) StubHandler; + InstancePtr->EventHandler = (XCanPs_EventHandler) StubHandler; + + /* + * Indicate the component is now ready to use. + */ + InstancePtr->IsReady = XIL_COMPONENT_IS_READY; + + /* + * Reset the device to get it into its initial state. + */ + XCanPs_Reset(InstancePtr); + + Status = XST_SUCCESS; + return Status; +} + +/*****************************************************************************/ +/** +* +* This function resets the CAN device. Calling this function resets the device +* immediately, and any pending transmission or reception is terminated at once. +* Both Object Layer and Transfer Layer are reset. This function does not reset +* the Physical Layer. All registers are reset to the default values, and no +* previous status will be restored. TX FIFO, RX FIFO and TX High Priority +* Buffer are also reset. +* +* When a reset is required due to an internal error, the driver notifies the +* upper layer software of this need through the error status code or interrupts. +* The upper layer software is responsible for calling this Reset function and +* then re-configuring the device. +* +* The CAN device will be in Configuration Mode immediately after this function +* returns. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCanPs_Reset(XCanPs *InstancePtr) +{ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, XCANPS_SRR_OFFSET, \ + XCANPS_SRR_SRST_MASK); +} + +/****************************************************************************/ +/** +* +* This routine returns the current operation mode of the CAN device. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return +* - XCANPS_MODE_CONFIG if the device is in Configuration Mode. +* - XCANPS_MODE_SLEEP if the device is in Sleep Mode. +* - XCANPS_MODE_NORMAL if the device is in Normal Mode. +* - XCANPS_MODE_LOOPBACK if the device is in Loop Back Mode. +* - XCANPS_MODE_SNOOP if the device is in Snoop Mode. +* +* @note None. +* +*****************************************************************************/ +u8 XCanPs_GetMode(XCanPs *InstancePtr) +{ + u32 StatusReg; + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + StatusReg = XCanPs_GetStatus(InstancePtr); + + if ((StatusReg & XCANPS_SR_CONFIG_MASK) != (u32)0) { + return (u8)XCANPS_MODE_CONFIG; + + } + else if ((StatusReg & XCANPS_SR_SLEEP_MASK) != (u32)0) { + return (u8)XCANPS_MODE_SLEEP; + + } + else if ((StatusReg & XCANPS_SR_NORMAL_MASK) != (u32)0) { + if ((StatusReg & XCANPS_SR_SNOOP_MASK) != (u32)0) { + return (u8)XCANPS_MODE_SNOOP; + } else { + return (u8)XCANPS_MODE_NORMAL; + } + } + else { + /* + * If this line is reached, the device is in Loop Back Mode. + */ + return (u8)XCANPS_MODE_LOOPBACK; + } +} + +/*****************************************************************************/ +/** +* +* This function allows the CAN device to enter one of the following operation +* modes: +* - Configuration Mode: Pass in parameter XCANPS_MODE_CONFIG +* - Sleep Mode: Pass in parameter XCANPS_MODE_SLEEP +* - Normal Mode: Pass in parameter XCANPS_MODE_NORMAL +* - Loop Back Mode: Pass in parameter XCANPS_MODE_LOOPBACK. +* - Snoop Mode: Pass in parameter XCANPS_MODE_SNOOP. +* +* Read the xcanps.h file and device specification for detailed description of +* each operation mode. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param OperationMode specify which operation mode to enter. Valid value +* is any of XCANPS_MODE_* defined in xcanps.h. Multiple modes +* can not be entered at the same time. +* +* @return None. +* +* @note +* +* This function does NOT ensure CAN device enters the specified operation mode +* before it returns the control to the caller. The caller is responsible for +* checking current operation mode using XCanPs_GetMode(). +* +******************************************************************************/ +void XCanPs_EnterMode(XCanPs *InstancePtr, u8 OperationMode) +{ + u8 CurrentMode; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid((OperationMode == (u8)XCANPS_MODE_CONFIG) || + (OperationMode == (u8)XCANPS_MODE_SLEEP) || + (OperationMode == (u8)XCANPS_MODE_NORMAL) || + (OperationMode == (u8)XCANPS_MODE_LOOPBACK) || + (OperationMode == (u8)XCANPS_MODE_SNOOP)); + + CurrentMode = XCanPs_GetMode(InstancePtr); + + /* + * If current mode is Normal Mode and the mode to enter is Sleep Mode, + * or if current mode is Sleep Mode and the mode to enter is Normal + * Mode, no transition through Configuration Mode is needed. + */ + if ((CurrentMode == (u8)XCANPS_MODE_NORMAL) && + (OperationMode == (u8)XCANPS_MODE_SLEEP)) { + /* + * Normal Mode ---> Sleep Mode + */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_MSR_OFFSET, XCANPS_MSR_SLEEP_MASK); + return; + + } else if ((CurrentMode == (u8)XCANPS_MODE_SLEEP) && + (OperationMode == (u8)XCANPS_MODE_NORMAL)) { + /* + * Sleep Mode ---> Normal Mode + */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_MSR_OFFSET, 0U); + return; + } + else { + /*This else was made for misra-c compliance*/ + ; + } + + /* + * If the mode transition is not any of the two cases above, CAN must + * enter Configuration Mode before switching into the target operation + * mode. + */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_SRR_OFFSET, 0U); + + /* + * Check if the device has entered Configuration Mode, if not, return to + * the caller. + */ + if (XCanPs_GetMode(InstancePtr) != (u8)XCANPS_MODE_CONFIG) { + return; + } + + switch (OperationMode) { + case XCANPS_MODE_CONFIG: + /* + * As CAN is in Configuration Mode already. + * Nothing is needed to be done here. + */ + break; + + case XCANPS_MODE_SLEEP: + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_MSR_OFFSET, XCANPS_MSR_SLEEP_MASK); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_SRR_OFFSET, XCANPS_SRR_CEN_MASK); + break; + + case XCANPS_MODE_NORMAL: + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_MSR_OFFSET, 0U); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_SRR_OFFSET, XCANPS_SRR_CEN_MASK); + break; + + case XCANPS_MODE_LOOPBACK: + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_MSR_OFFSET, XCANPS_MSR_LBACK_MASK); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_SRR_OFFSET, XCANPS_SRR_CEN_MASK); + break; + + case XCANPS_MODE_SNOOP: + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_MSR_OFFSET, XCANPS_MSR_SNOOP_MASK); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_SRR_OFFSET, XCANPS_SRR_CEN_MASK); + break; + + default: + /*This default was made for misra-c compliance*/ + break; + + } +} + +/*****************************************************************************/ +/** +* +* This function returns Status value from Status Register (SR). Use the +* XCANPS_SR_* constants defined in xcanps_hw.h to interpret the returned +* value. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return The 32-bit value read from Status Register. +* +* @note None. +* +******************************************************************************/ +u32 XCanPs_GetStatus(XCanPs *InstancePtr) +{ + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + return XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_SR_OFFSET); +} + +/*****************************************************************************/ +/** +* +* This function reads Receive and Transmit error counters. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param RxErrorCount is a pointer to data in which the Receive Error +* counter value is returned. +* @param TxErrorCount is a pointer to data in which the Transmit Error +* counter value is returned. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCanPs_GetBusErrorCounter(XCanPs *InstancePtr, u8 *RxErrorCount, + u8 *TxErrorCount) +{ + u32 ErrorCount; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(RxErrorCount != NULL); + Xil_AssertVoid(TxErrorCount != NULL); + /* + * Read Error Counter Register and parse it. + */ + ErrorCount = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_ECR_OFFSET); + *RxErrorCount = (u8)((ErrorCount & XCANPS_ECR_REC_MASK) >> + XCANPS_ECR_REC_SHIFT); + *TxErrorCount = (u8)(ErrorCount & XCANPS_ECR_TEC_MASK); +} + +/*****************************************************************************/ +/** +* +* This function reads Error Status value from Error Status Register (ESR). Use +* the XCANPS_ESR_* constants defined in xcanps_hw.h to interpret the +* returned value. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return The 32-bit value read from Error Status Register. +* +* @note None. +* +******************************************************************************/ +u32 XCanPs_GetBusErrorStatus(XCanPs *InstancePtr) +{ + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + return XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_ESR_OFFSET); +} + +/*****************************************************************************/ +/** +* +* This function clears Error Status bit(s) previously set in Error +* Status Register (ESR). Use the XCANPS_ESR_* constants defined in xcanps_hw.h +* to create the value to pass in. If a bit was cleared in Error Status Register +* before this function is called, it will not be modified. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @param Mask is he 32-bit mask used to clear bits in Error Status +* Register. Multiple XCANPS_ESR_* values can be 'OR'ed to clear +* multiple bits. +* +* @note None. +* +******************************************************************************/ +void XCanPs_ClearBusErrorStatus(XCanPs *InstancePtr, u32 Mask) +{ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_ESR_OFFSET, Mask); +} + +/*****************************************************************************/ +/** +* +* This function sends a CAN Frame. If the TX FIFO is not full then the given +* frame is written into the the TX FIFO otherwise, it returns an error code +* immediately. +* This function does not wait for the given frame being sent to CAN bus. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param FramePtr is a pointer to a 32-bit aligned buffer containing the +* CAN frame to be sent. +* +* @return +* - XST_SUCCESS if TX FIFO was not full and the given frame was +* written into the FIFO. +* - XST_FIFO_NO_ROOM if there is no room in the TX FIFO for the +* given frame. +* +* @note None. +* +******************************************************************************/ +s32 XCanPs_Send(XCanPs *InstancePtr, u32 *FramePtr) +{ + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(FramePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (XCanPs_IsTxFifoFull(InstancePtr) == TRUE) { + Status = XST_FIFO_NO_ROOM; + } else { + + /* + * Write IDR, DLC, Data Word 1 and Data Word 2 to the CAN device. + */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXFIFO_ID_OFFSET, FramePtr[0]); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXFIFO_DLC_OFFSET, FramePtr[1]); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXFIFO_DW1_OFFSET, Xil_EndianSwap32(FramePtr[2])); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXFIFO_DW2_OFFSET, Xil_EndianSwap32(FramePtr[3])); + + Status = XST_SUCCESS; + } + return Status; +} + +/*****************************************************************************/ +/** +* +* This function receives a CAN Frame. This function first checks if RX FIFO is +* empty, if not, it then reads a frame from the RX FIFO into the given buffer. +* This function returns error code immediately if there is no frame in the RX +* FIFO. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param FramePtr is a pointer to a 32-bit aligned buffer where the CAN +* frame to be written. +* +* @return +* - XST_SUCCESS if RX FIFO was not empty and a frame was read from +* RX FIFO successfully and written into the given buffer. +* - XST_NO_DATA if there is no frame to be received from the FIFO. +* +* @note None. +* +******************************************************************************/ +s32 XCanPs_Recv(XCanPs *InstancePtr, u32 *FramePtr) +{ + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(FramePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (XCanPs_IsRxEmpty(InstancePtr) == TRUE) { + Status = XST_NO_DATA; + } else { + + /* + * Read IDR, DLC, Data Word 1 and Data Word 2 from the CAN device. + */ + FramePtr[0] = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_RXFIFO_ID_OFFSET); + FramePtr[1] = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_RXFIFO_DLC_OFFSET); + FramePtr[2] = Xil_EndianSwap32(XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_RXFIFO_DW1_OFFSET)); + FramePtr[3] = Xil_EndianSwap32(XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_RXFIFO_DW2_OFFSET)); + + /* + * Clear RXNEMP bit in ISR. This allows future XCanPs_IsRxEmpty() call + * returns correct RX FIFO occupancy/empty condition. + */ + XCanPs_IntrClear(InstancePtr, XCANPS_IXR_RXNEMP_MASK); + + Status = XST_SUCCESS; + } + return Status; +} + +/*****************************************************************************/ +/** +* +* This routine sends a CAN High Priority frame. This function first checks if +* TX High Priority Buffer is empty. If yes, it then writes the given frame into +* the Buffer. If not, this function returns immediately. This function does not +* wait for the given frame being sent to CAN bus. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param FramePtr is a pointer to a 32-bit aligned buffer containing the +* CAN High Priority frame to be sent. +* +* @return +* - XST_SUCCESS if TX High Priority Buffer was not full and the +* given frame was written into the buffer. +* - XST_FIFO_NO_ROOM if there is no room in the TX High Priority +* Buffer for this frame. +* +* @note +* +* If the frame needs to be sent immediately and not delayed by processor's +* interrupt handling, the caller should disable interrupt at processor +* level before invoking this function. +* +******************************************************************************/ +s32 XCanPs_SendHighPriority(XCanPs *InstancePtr, u32 *FramePtr) +{ + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(FramePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (XCanPs_IsHighPriorityBufFull(InstancePtr) == TRUE) { + Status = XST_FIFO_NO_ROOM; + } else { + + /* + * Write IDR, DLC, Data Word 1 and Data Word 2 to the CAN device. + */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXHPB_ID_OFFSET, FramePtr[0]); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXHPB_DLC_OFFSET, FramePtr[1]); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXHPB_DW1_OFFSET, Xil_EndianSwap32(FramePtr[2])); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_TXHPB_DW2_OFFSET, Xil_EndianSwap32(FramePtr[3])); + + Status = XST_SUCCESS; + } + return Status; +} + +/*****************************************************************************/ +/** +* +* This routine enables individual acceptance filters. Up to 4 filters could +* be enabled. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param FilterIndexes specifies which filter(s) to enable. Use +* any XCANPS_AFR_UAF*_MASK to enable one filter, and "Or" +* multiple XCANPS_AFR_UAF*_MASK values if multiple filters need +* to be enabled. Any filter not specified in this parameter will +* keep its previous enable/disable setting. +* +* @return None. +* +* @note None. +* +* +******************************************************************************/ +void XCanPs_AcceptFilterEnable(XCanPs *InstancePtr, u32 FilterIndexes) +{ + u32 EnabledFilters; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + /* + * Calculate the new value and write to AFR. + */ + EnabledFilters = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFR_OFFSET); + EnabledFilters |= FilterIndexes; + EnabledFilters &= (u32)XCANPS_AFR_UAF_ALL_MASK; + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, XCANPS_AFR_OFFSET, + EnabledFilters); +} + +/*****************************************************************************/ +/** +* +* This routine disables individual acceptance filters. Up to 4 filters could +* be disabled. If all acceptance filters are disabled then all the received +* frames are stored in the RX FIFO. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param FilterIndexes specifies which filter(s) to disable. Use +* any XCANPS_AFR_UAF*_MASK to disable one filter, and "Or" +* multiple XCANPS_AFR_UAF*_MASK values if multiple filters need +* to be disabled. Any filter not specified in this parameter will +* keep its previous enable/disable setting. If all acceptance +* filters are disabled then all received frames are stored in the +* RX FIFO. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCanPs_AcceptFilterDisable(XCanPs *InstancePtr, u32 FilterIndexes) +{ + u32 EnabledFilters; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + /* + * Calculate the new value and write to AFR. + */ + EnabledFilters = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFR_OFFSET); + EnabledFilters &= (u32)XCANPS_AFR_UAF_ALL_MASK & (~FilterIndexes); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, XCANPS_AFR_OFFSET, + EnabledFilters); +} + +/*****************************************************************************/ +/** +* +* This function returns enabled acceptance filters. Use XCANPS_AFR_UAF*_MASK +* defined in xcanps_hw.h to interpret the returned value. If no acceptance +* filters are enabled then all received frames are stored in the RX FIFO. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return The value stored in Acceptance Filter Register. +* +* @note None. +* +* +******************************************************************************/ +u32 XCanPs_AcceptFilterGetEnabled(XCanPs *InstancePtr) +{ + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + return XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFR_OFFSET); + +} + +/*****************************************************************************/ +/** +* +* This function sets values to the Acceptance Filter Mask Register (AFMR) and +* Acceptance Filter ID Register (AFIR) for the specified Acceptance Filter. +* Use XCANPS_IDR_* defined in xcanps_hw.h to create the values to set the +* filter. Read the xcanps.h file and device specification for details. +* +* This function should be called only after: +* - The given filter is disabled by calling XCanPs_AcceptFilterDisable() +* - And the CAN device is ready to accept writes to AFMR and AFIR, i.e., +* XCanPs_IsAcceptFilterBusy() returns FALSE. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param FilterIndex defines which Acceptance Filter Mask and ID Register +* to set. Use any single XCANPS_AFR_UAF*_MASK value. +* @param MaskValue is the value to write to the chosen Acceptance Filter +* Mask Register. +* @param IdValue is the value to write to the chosen Acceptance Filter +* ID Register. +* +* @return +* - XST_SUCCESS if the values were set successfully. +* - XST_FAILURE if the given filter was not disabled, or the CAN +* device was not ready to accept writes to AFMR and AFIR. +* +* @note None. +* +******************************************************************************/ +s32 XCanPs_AcceptFilterSet(XCanPs *InstancePtr, u32 FilterIndex, + u32 MaskValue, u32 IdValue) +{ + u32 EnabledFilters; + s32 Status; + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid((FilterIndex == XCANPS_AFR_UAF4_MASK) || + (FilterIndex == XCANPS_AFR_UAF3_MASK) || + (FilterIndex == XCANPS_AFR_UAF2_MASK) || + (FilterIndex == XCANPS_AFR_UAF1_MASK)); + + /* + * Return an error if the given filter is currently enabled. + */ + EnabledFilters = XCanPs_AcceptFilterGetEnabled(InstancePtr); + if ((EnabledFilters & FilterIndex) == FilterIndex) { + Status = XST_FAILURE; + } else { + + /* + * If the CAN device is not ready to accept writes to AFMR and AFIR, + * return error code. + */ + if (XCanPs_IsAcceptFilterBusy(InstancePtr) == TRUE) { + Status = XST_FAILURE; + } else { + + /* + * Write to the AFMR and AFIR of the specified filter. + */ + switch (FilterIndex) { + case XCANPS_AFR_UAF1_MASK: /* Acceptance Filter No. 1 */ + + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR1_OFFSET, MaskValue); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR1_OFFSET, IdValue); + break; + + case XCANPS_AFR_UAF2_MASK: /* Acceptance Filter No. 2 */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR2_OFFSET, MaskValue); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR2_OFFSET, IdValue); + break; + + case XCANPS_AFR_UAF3_MASK: /* Acceptance Filter No. 3 */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR3_OFFSET, MaskValue); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR3_OFFSET, IdValue); + break; + + case XCANPS_AFR_UAF4_MASK: /* Acceptance Filter No. 4 */ + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR4_OFFSET, MaskValue); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR4_OFFSET, IdValue); + break; + + default: + /*This default was made for misra-c compliance*/ + break; + } + + Status = XST_SUCCESS; + } + } + return Status; +} + +/*****************************************************************************/ +/** +* +* This function reads the values of the Acceptance Filter Mask and ID Register +* for the specified Acceptance Filter. Use XCANPS_IDR_* defined in xcanps_hw.h +* to interpret the values. Read the xcanps.h file and device specification for +* details. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param FilterIndex defines which Acceptance Filter Mask Register to get +* Mask and ID from. Use any single XCANPS_FILTER_* value. +* @param MaskValue is a pointer to the data in which the Mask value read +* from the chosen Acceptance Filter Mask Register is returned. +* @param IdValue is a pointer to the data in which the ID value read +* from the chosen Acceptance Filter ID Register is returned. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCanPs_AcceptFilterGet(XCanPs *InstancePtr, u32 FilterIndex, + u32 *MaskValue, u32 *IdValue) +{ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid((FilterIndex == XCANPS_AFR_UAF4_MASK) || + (FilterIndex == XCANPS_AFR_UAF3_MASK) || + (FilterIndex == XCANPS_AFR_UAF2_MASK) || + (FilterIndex == XCANPS_AFR_UAF1_MASK)); + Xil_AssertVoid(MaskValue != NULL); + Xil_AssertVoid(IdValue != NULL); + + /* + * Read from the AFMR and AFIR of the specified filter. + */ + switch (FilterIndex) { + case XCANPS_AFR_UAF1_MASK: /* Acceptance Filter No. 1 */ + *MaskValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR1_OFFSET); + *IdValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR1_OFFSET); + break; + + case XCANPS_AFR_UAF2_MASK: /* Acceptance Filter No. 2 */ + *MaskValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR2_OFFSET); + *IdValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR2_OFFSET); + break; + + case XCANPS_AFR_UAF3_MASK: /* Acceptance Filter No. 3 */ + *MaskValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR3_OFFSET); + *IdValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR3_OFFSET); + break; + + case XCANPS_AFR_UAF4_MASK: /* Acceptance Filter No. 4 */ + *MaskValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFMR4_OFFSET); + *IdValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_AFIR4_OFFSET); + break; + + default: + /*This default was made for misra-c compliance*/ + break; + } +} + +/*****************************************************************************/ +/** +* +* This routine sets Baud Rate Prescaler value. The system clock for the CAN +* controller is divided by (Prescaler + 1) to generate the quantum clock +* needed for sampling and synchronization. Read the device specification +* for details. +* +* Baud Rate Prescaler can be set only if the CAN device is in Configuration +* Mode. Call XCanPs_EnterMode() to enter Configuration Mode before using this +* function. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param Prescaler is the value to set. Valid values are from 0 to 255. +* +* @return +* - XST_SUCCESS if the Baud Rate Prescaler value is set +* successfully. +* - XST_FAILURE if CAN device is not in Configuration Mode. +* +* @note None. +* +******************************************************************************/ +s32 XCanPs_SetBaudRatePrescaler(XCanPs *InstancePtr, u8 Prescaler) +{ + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + if (XCanPs_GetMode(InstancePtr) != (u8)XCANPS_MODE_CONFIG) { + Status = XST_FAILURE; + } else { + + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, XCANPS_BRPR_OFFSET, + (u32)Prescaler); + + Status = XST_SUCCESS; + } + return Status; +} + +/*****************************************************************************/ +/** +* +* This routine gets Baud Rate Prescaler value. The system clock for the CAN +* controller is divided by (Prescaler + 1) to generate the quantum clock +* needed for sampling and synchronization. Read the device specification for +* details. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return Current used Baud Rate Prescaler value. The value's range is +* from 0 to 255. +* +* @note None. +* +******************************************************************************/ +u8 XCanPs_GetBaudRatePrescaler(XCanPs *InstancePtr) +{ + u32 ReadValue; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + ReadValue = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_BRPR_OFFSET); + return ((u8)ReadValue); +} + +/*****************************************************************************/ +/** +* +* This routine sets Bit time. Time segment 1, Time segment 2 and +* Synchronization Jump Width are set in this function. Device specification +* requires the values passed into this function be one less than the actual +* values of these fields. Read the device specification for details. +* +* Bit time can be set only if the CAN device is in Configuration Mode. +* Call XCanPs_EnterMode() to enter Configuration Mode before using this +* function. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param SyncJumpWidth is the Synchronization Jump Width value to set. +* Valid values are from 0 to 3. +* @param TimeSegment2 is the Time Segment 2 value to set. Valid values +* are from 0 to 7. +* @param TimeSegment1 is the Time Segment 1 value to set. Valid values +* are from 0 to 15. +* +* @return +* - XST_SUCCESS if the Bit time is set successfully. +* - XST_FAILURE if CAN device is not in Configuration Mode. +* +* @note None. +* +******************************************************************************/ +s32 XCanPs_SetBitTiming(XCanPs *InstancePtr, u8 SyncJumpWidth, + u8 TimeSegment2, u8 TimeSegment1) +{ + u32 Value; + s32 Status; + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(SyncJumpWidth <= (u8)3U); + Xil_AssertNonvoid(TimeSegment2 <= (u8)7U); + Xil_AssertNonvoid(TimeSegment1 <= (u8)15U ); + + if (XCanPs_GetMode(InstancePtr) != (u8)XCANPS_MODE_CONFIG) { + Status = XST_FAILURE; + } else { + + Value = ((u32) TimeSegment1) & XCANPS_BTR_TS1_MASK; + Value |= (((u32) TimeSegment2) << XCANPS_BTR_TS2_SHIFT) & + XCANPS_BTR_TS2_MASK; + Value |= (((u32) SyncJumpWidth) << XCANPS_BTR_SJW_SHIFT) & + XCANPS_BTR_SJW_MASK; + + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_BTR_OFFSET, Value); + + Status = XST_SUCCESS; + } + return Status; +} + +/*****************************************************************************/ +/** +* +* This routine gets Bit time. Time segment 1, Time segment 2 and +* Synchronization Jump Width values are read in this function. According to +* device specification, the actual value of each of these fields is one +* more than the value read. Read the device specification for details. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param SyncJumpWidth will store the Synchronization Jump Width value +* after this function returns. Its value ranges from 0 to 3. +* @param TimeSegment2 will store the Time Segment 2 value after this +* function returns. Its value ranges from 0 to 7. +* @param TimeSegment1 will store the Time Segment 1 value after this +* function returns. Its value ranges from 0 to 15. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCanPs_GetBitTiming(XCanPs *InstancePtr, u8 *SyncJumpWidth, + u8 *TimeSegment2, u8 *TimeSegment1) +{ + u32 Value; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertVoid(SyncJumpWidth != NULL); + Xil_AssertVoid(TimeSegment2 != NULL); + Xil_AssertVoid(TimeSegment1 != NULL); + + Value = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_BTR_OFFSET); + + *TimeSegment1 = (u8) (Value & XCANPS_BTR_TS1_MASK); + *TimeSegment2 = + (u8) ((Value & XCANPS_BTR_TS2_MASK) >> XCANPS_BTR_TS2_SHIFT); + *SyncJumpWidth = + (u8) ((Value & XCANPS_BTR_SJW_MASK) >> XCANPS_BTR_SJW_SHIFT); +} + + +/****************************************************************************/ +/** +* +* This routine sets the Rx Full threshold in the Watermark Interrupt Register. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param Threshold is the threshold to be set. The valid values are +* from 1 to 63. +* +* @return +* - XST_FAILURE - If the CAN device is not in Configuration Mode. +* - XST_SUCCESS - If the Rx Full threshold is set in Watermark +* Interrupt Register. +* +* @note The threshold can only be set when the CAN device is in the +* configuration mode. +* +*****************************************************************************/ +s32 XCanPs_SetRxIntrWatermark(XCanPs *InstancePtr, u8 Threshold) +{ + + u32 ThrReg; + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(Threshold <= (u8)63); + + if (XCanPs_GetMode(InstancePtr) != (u8)XCANPS_MODE_CONFIG) { + Status = XST_FAILURE; + } else { + + ThrReg = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_WIR_OFFSET); + + ThrReg &= XCANPS_WIR_EW_MASK; + ThrReg |= ((u32)Threshold & XCANPS_WIR_FW_MASK); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_WIR_OFFSET, ThrReg); + + Status = XST_SUCCESS; + } + return Status; +} + +/****************************************************************************/ +/** +* +* This routine gets the Rx Full threshold from the Watermark Interrupt Register. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return The Rx FIFO full watermark threshold value. The valid values +* are 1 to 63. +* +* @note None. +* +*****************************************************************************/ +u8 XCanPs_GetRxIntrWatermark(XCanPs *InstancePtr) +{ + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + + return (u8) (XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_WIR_OFFSET) & + XCANPS_WIR_FW_MASK); +} + + +/****************************************************************************/ +/** +* +* This routine sets the Tx Empty Threshold in the Watermark Interrupt Register. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param Threshold is the threshold to be set. The valid values are +* from 1 to 63. +* +* @return +* - XST_FAILURE - If the CAN device is not in Configuration Mode. +* - XST_SUCCESS - If the threshold is set in Watermark +* Interrupt Register. +* +* @note The threshold can only be set when the CAN device is in the +* configuration mode. +* +*****************************************************************************/ +s32 XCanPs_SetTxIntrWatermark(XCanPs *InstancePtr, u8 Threshold) +{ + u32 ThrReg; + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + Xil_AssertNonvoid(Threshold <= (u8)63); + + if (XCanPs_GetMode(InstancePtr) != (u8)XCANPS_MODE_CONFIG) { + Status = XST_FAILURE; + } else { + + ThrReg = XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_WIR_OFFSET); + + ThrReg &= XCANPS_WIR_FW_MASK; + ThrReg |= (((u32)Threshold << XCANPS_WIR_EW_SHIFT) + & XCANPS_WIR_EW_MASK); + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_WIR_OFFSET, ThrReg); + + Status = XST_SUCCESS; + } + return Status; +} + +/****************************************************************************/ +/** +* +* This routine gets the Tx Empty threshold from Watermark Interrupt Register. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return The Tx Empty FIFO threshold value. The valid values are 1 to 63. +* +* @note None. +* +*****************************************************************************/ +u8 XCanPs_GetTxIntrWatermark(XCanPs *InstancePtr) +{ + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + + return (u8) ((XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_WIR_OFFSET) & XCANPS_WIR_EW_MASK) >> + XCANPS_WIR_EW_SHIFT); +} + + + +/******************************************************************************/ +/* + * This routine is a stub for the asynchronous callbacks. The stub is here in + * case the upper layer forgot to set the handler(s). On initialization, all + * handlers are set to this callback. It is considered an error for this handler + * to be invoked. + * + ******************************************************************************/ +static void StubHandler(void) +{ + Xil_AssertVoidAlways(); +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps.h new file mode 100644 index 000000000..b180e37ec --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps.h @@ -0,0 +1,575 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcanps.h +* @addtogroup canps_v3_0 +* @{ +* @details +* +* The Xilinx CAN driver component. This component supports the Xilinx +* CAN Controller. +* +* The CAN Controller supports the following features: +* - Confirms to the ISO 11898-1, CAN 2.0A and CAN 2.0B standards. +* - Supports both Standard (11 bit Identifier) and Extended (29 bit +* Identifier) frames. +* - Supports Bit Rates up to 1 Mbps. +* - Transmit message object FIFO with a user configurable depth of +* up to 64 message objects. +* - Transmit prioritization through one TX High Priority Buffer. +* - Receive message object FIFO with a user configurable depth of +* up to 64 message objects. +* - Watermark interrupts for Rx FIFO with configurable Watermark. +* - Acceptance filtering with 4 acceptance filters. +* - Sleep mode with automatic wake up. +* - Loop Back mode for diagnostic applications. +* - Snoop mode for diagnostic applications. +* - Maskable Error and Status Interrupts. +* - Readable Error Counters. +* - External PHY chip required. +* - Receive Timestamp. +* +* The device driver supports all the features listed above, if applicable. +* +* Driver Description +* +* The device driver enables higher layer software (e.g., an application) to +* communicate to the CAN. The driver handles transmission and reception of +* CAN frames, as well as configuration of the controller. The driver is simply a +* pass-through mechanism between a protocol stack and the CAN. A single device +* driver can support multiple CANs. +* +* Since the driver is a simple pass-through mechanism between a protocol stack +* and the CAN, no assembly or disassembly of CAN frames is done at the +* driver-level. This assumes that the protocol stack passes a correctly +* formatted CAN frame to the driver for transmission, and that the driver +* does not validate the contents of an incoming frame +* +* Operation Modes +* +* The CAN controller supports the following modes of operation: +* - Configuration Mode: In this mode the CAN timing parameters and +* Baud Rate Pre-scalar parameters can be changed. In this mode the CAN +* controller loses synchronization with the CAN bus and drives a +* constant recessive bit on the bus line. The Error Counter Register are +* reset. The CAN controller does not receive or transmit any messages +* even if there are pending transmit requests from the TX FIFO or the TX +* High Priority Buffer. The Storage FIFOs and the CAN configuration +* registers are still accessible. +* - Normal Mode:In Normal Mode the CAN controller participates in bus +* communication, by transmitting and receiving messages. +* - Sleep Mode: In Sleep Mode the CAN Controller does not transmit any +* messages. However, if any other node transmits a message, then the CAN +* Controller receives the transmitted message and exits from Sleep Mode. +* If there are new transmission requests from either the TX FIFO or the +* TX High Priority Buffer when the CAN Controller is in Sleep Mode, these +* requests are not serviced, and the CAN Controller continues to remain +* in Sleep Mode. Interrupts are generated when the CAN controller enters +* Sleep mode or Wakes up from Sleep mode. +* - Loop Back Mode: In Loop Back mode, the CAN controller transmits a +* recessive bit stream on to the CAN Bus. Any message that is transmitted +* is looped back to the �Rx� line and acknowledged. The CAN controller +* thus receives any message that it transmits. It does not participate in +* normal bus communication and does not receive any messages that are +* transmitted by other CAN nodes. This mode is used for diagnostic +* purposes. +* - Snoop Mode: In Snoop mode, the CAN controller transmits a +* recessive bit stream on to the CAN Bus and does not participate +* in normal bus communication but receives messages that are transmitted +* by other CAN nodes. This mode is used for diagnostic purposes. +* +* +* Buffer Alignment +* +* It is important to note that frame buffers passed to the driver must be +* 32-bit aligned. +* +* Receive Address Filtering +* +* The device can be set to accept frames whose Identifiers match any of the +* 4 filters set in the Acceptance Filter Mask/ID registers. +* +* The incoming Identifier is masked with the bits in the Acceptance Filter Mask +* Register. This value is compared with the result of masking the bits in the +* Acceptance Filter ID Register with the Acceptance Filter Mask Register. If +* both these values are equal, the message will be stored in the RX FIFO. +* +* Acceptance Filtering is performed by each of the defined acceptance filters. +* If the incoming identifier passes through any acceptance filter then the +* frame is stored in the RX FIFO. +* +* If the Accpetance Filters are not set up then all the received messages are +* stroed in the RX FIFO. +* +* PHY Communication +* +* This driver does not provide any mechanism for directly programming PHY. +* +* Interrupts +* +* The driver has no dependencies on the interrupt controller. The driver +* provides an interrupt handler. User of this driver needs to provide +* callback functions. An interrupt handler example is available with +* the driver. +* +* Threads +* +* This driver is not thread safe. Any needs for threads or thread mutual +* exclusion must be satisfied by the layer above this driver. +* +* Device Reset +* +* Bus Off interrupt that can occur in the device requires a device reset. +* The user is responsible for resetting the device and re-configuring it +* based on its needs (the driver does not save the current configuration). +* When integrating into an RTOS, these reset and re-configure obligations are +* taken care of by the OS adapter software if it exists for that RTOS. +* +* Device Configuration +* +* The device can be configured in various ways during the FPGA implementation +* process. Configuration parameters are stored in the xcanps_g.c files. +* A table is defined where each entry contains configuration information +* for a CAN device. This information includes such things as the base address +* of the memory-mapped device. +* +* Asserts +* +* Asserts are used within all Xilinx drivers to enforce constraints on argument +* values. Asserts can be turned off on a system-wide basis by defining, at +* compile time, the NDEBUG identifier. By default, asserts are turned on and it +* is recommended that users leave asserts on during development. +* +* Building the driver +* +* The XCanPs driver is composed of several source files. This allows the user +* to build and link only those parts of the driver that are necessary. +*

+* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00a xd/sv  01/12/10 First release
+* 1.01a bss    12/27/11 Added the APIs XCanPs_SetTxIntrWatermark and
+* 			XCanPs_GetTxIntrWatermark.
+*			Updated the Register/bit definitions
+*                       Changed XCANPS_RXFWIR_RXFLL_MASK to XCANPS_WIR_FW_MASK
+*                       Changed XCANPS_RXWIR_OFFSET to XCANPS_WIR_OFFSET
+*			Added XCANPS_IXR_TXFEMP_MASK for Tx Fifo Empty
+*			Changed XCANPS_IXR_RXFLL_MASK to
+*			XCANPS_IXR_RXFWMFLL_MASK
+* 			Changed
+*			XCANPS_TXBUF_ID_OFFSET to XCANPS_TXHPB_ID_OFFSET
+* 			XCANPS_TXBUF_DLC_OFFSET to XCANPS_TXHPB_DLC_OFFSET
+*			XCANPS_TXBUF_DW1_OFFSET to XCANPS_TXHPB_DW1_OFFSET
+*			XCANPS_TXBUF_DW2_OFFSET to XCANPS_TXHPB_DW2_OFFSET
+* 2.1 adk 		23/08/14 Fixed CR:798792 Peripheral test for CANPS IP in
+*			SDK claims a 40kbps baud rate but it's not.
+* 3.0 adk     09/12/14  Added support for Zynq Ultrascale Mp.Also code
+*			modified for MISRA-C:2012 compliance.
+* 3.1 adk     10/11/15  Fixed CR#911958 Add support for Tx Watermark example.
+*			Data mismatch while sending data less than 8 bytes.
+* 3.1 nsk     12/21/15  Updated XCanPs_IntrHandler in xcanps_intr.c to handle
+*			error interrupts correctly. CR#925615
+*
+* +******************************************************************************/ +#ifndef XCANPS_H /* prevent circular inclusions */ +#define XCANPS_H /* by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files *********************************/ + +#include "xstatus.h" +#include "xcanps_hw.h" +#include "xil_types.h" + +/************************** Constant Definitions *****************************/ + +/** @name CAN operation modes + * @{ + */ +#define XCANPS_MODE_CONFIG 0x00000001U /**< Configuration mode */ +#define XCANPS_MODE_NORMAL 0x00000002U /**< Normal mode */ +#define XCANPS_MODE_LOOPBACK 0x00000004U /**< Loop Back mode */ +#define XCANPS_MODE_SLEEP 0x00000008U /**< Sleep mode */ +#define XCANPS_MODE_SNOOP 0x00000010U /**< Snoop mode */ +/* @} */ + +/** @name Callback identifiers used as parameters to XCanPs_SetHandler() + * @{ + */ +#define XCANPS_HANDLER_SEND 1U /**< Handler type for frame sending interrupt */ +#define XCANPS_HANDLER_RECV 2U /**< Handler type for frame reception interrupt*/ +#define XCANPS_HANDLER_ERROR 3U /**< Handler type for error interrupt */ +#define XCANPS_HANDLER_EVENT 4U /**< Handler type for all other interrupts */ +/* @} */ + +/**************************** Type Definitions *******************************/ + +/** + * This typedef contains configuration information for a device. + */ +typedef struct { + u16 DeviceId; /**< Unique ID of device */ + u32 BaseAddr; /**< Register base address */ +} XCanPs_Config; + +/******************************************************************************/ +/** + * Callback type for frame sending and reception interrupts. + * + * @param CallBackRef is a callback reference passed in by the upper layer + * when setting the callback functions, and passed back to the + * upper layer when the callback is invoked. +*******************************************************************************/ +typedef void (*XCanPs_SendRecvHandler) (void *CallBackRef); + +/******************************************************************************/ +/** + * Callback type for error interrupt. + * + * @param CallBackRef is a callback reference passed in by the upper layer + * when setting the callback functions, and passed back to the + * upper layer when the callback is invoked. + * @param ErrorMask is a bit mask indicating the cause of the error. Its + * value equals 'OR'ing one or more XCANPS_ESR_* values defined in + * xcanps_hw.h +*******************************************************************************/ +typedef void (*XCanPs_ErrorHandler) (void *CallBackRef, u32 ErrorMask); + +/******************************************************************************/ +/** + * Callback type for all kinds of interrupts except sending frame interrupt, + * receiving frame interrupt, and error interrupt. + * + * @param CallBackRef is a callback reference passed in by the upper layer + * when setting the callback functions, and passed back to the + * upper layer when the callback is invoked. + * @param Mask is a bit mask indicating the pending interrupts. Its value + * equals 'OR'ing one or more XCANPS_IXR_* defined in xcanps_hw.h +*******************************************************************************/ +typedef void (*XCanPs_EventHandler) (void *CallBackRef, u32 Mask); + +/** + * The XCanPs driver instance data. The user is required to allocate a + * variable of this type for every CAN device in the system. A pointer + * to a variable of this type is then passed to the driver API functions. + */ +typedef struct { + XCanPs_Config CanConfig; /**< Device configuration */ + u32 IsReady; /**< Device is initialized and ready */ + + /** + * Callback and callback reference for TXOK interrupt. + */ + XCanPs_SendRecvHandler SendHandler; + void *SendRef; + + /** + * Callback and callback reference for RXOK/RXNEMP/RXFLL interrupts. + */ + XCanPs_SendRecvHandler RecvHandler; + void *RecvRef; + + /** + * Callback and callback reference for ERROR interrupt. + */ + XCanPs_ErrorHandler ErrorHandler; + void *ErrorRef; + + /** + * Callback and callback reference for RXOFLW/RXUFLW/TXBFLL/TXFLL/ + * Wakeup/Sleep/Bus off/ARBLST interrupts. + */ + XCanPs_EventHandler EventHandler; + void *EventRef; + +} XCanPs; + + +/***************** Macros (Inline Functions) Definitions *********************/ + +/****************************************************************************/ +/** +* +* This macro checks if the transmission is complete. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return +* - TRUE if the transmission is done. +* - FALSE if the transmission is not done. +* +* @note C-Style signature: +* int XCanPs_IsTxDone(XCanPs *InstancePtr) +* +*******************************************************************************/ +#define XCanPs_IsTxDone(InstancePtr) \ + (((XCanPs_ReadReg(((InstancePtr)->CanConfig.BaseAddr), \ + XCANPS_ISR_OFFSET) & XCANPS_IXR_TXOK_MASK) != (u32)0) ? TRUE : FALSE) + + +/****************************************************************************/ +/** +* +* This macro checks if the transmission FIFO is full. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return +* - TRUE if TX FIFO is full. +* - FALSE if the TX FIFO is NOT full. +* +* @note C-Style signature: +* int XCanPs_IsTxFifoFull(XCanPs *InstancePtr) +* +*****************************************************************************/ +#define XCanPs_IsTxFifoFull(InstancePtr) \ + (((XCanPs_ReadReg(((InstancePtr)->CanConfig.BaseAddr), \ + XCANPS_SR_OFFSET) & XCANPS_SR_TXFLL_MASK) != (u32)0) ? TRUE : FALSE) + + +/****************************************************************************/ +/** +* +* This macro checks if the Transmission High Priority Buffer is full. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return +* - TRUE if the TX High Priority Buffer is full. +* - FALSE if the TX High Priority Buffer is NOT full. +* +* @note C-Style signature: +* int XCanPs_IsHighPriorityBufFull(XCanPs *InstancePtr) +* +*****************************************************************************/ +#define XCanPs_IsHighPriorityBufFull(InstancePtr) \ + (((XCanPs_ReadReg(((InstancePtr)->CanConfig.BaseAddr), \ + XCANPS_SR_OFFSET) & XCANPS_SR_TXBFLL_MASK) != (u32)0) ? TRUE : FALSE) + + +/****************************************************************************/ +/** +* +* This macro checks if the receive FIFO is empty. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return +* - TRUE if RX FIFO is empty. +* - FALSE if the RX FIFO is NOT empty. +* +* @note C-Style signature: +* int XCanPs_IsRxEmpty(XCanPs *InstancePtr) +* +*****************************************************************************/ +#define XCanPs_IsRxEmpty(InstancePtr) \ + (((XCanPs_ReadReg(((InstancePtr)->CanConfig.BaseAddr), \ + XCANPS_ISR_OFFSET) & XCANPS_IXR_RXNEMP_MASK) != (u32)0) ? FALSE : TRUE) + + +/****************************************************************************/ +/** +* +* This macro checks if the CAN device is ready for the driver to change +* Acceptance Filter Identifier Registers (AFIR) and Acceptance Filter Mask +* Registers (AFMR). +* +* AFIR and AFMR for a filter are changeable only after the filter is disabled +* and this routine returns FALSE. The filter can be disabled using the +* XCanPs_AcceptFilterDisable function. +* +* Use the XCanPs_Accept_* functions for configuring the acceptance filters. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return +* - TRUE if the device is busy and NOT ready to accept writes to +* AFIR and AFMR. +* - FALSE if the device is ready to accept writes to AFIR and +* AFMR. +* +* @note C-Style signature: +* int XCanPs_IsAcceptFilterBusy(XCanPs *InstancePtr) +* +*****************************************************************************/ +#define XCanPs_IsAcceptFilterBusy(InstancePtr) \ + (((XCanPs_ReadReg(((InstancePtr)->CanConfig.BaseAddr), \ + XCANPS_SR_OFFSET) & XCANPS_SR_ACFBSY_MASK) != (u32)0) ? TRUE : FALSE) + + +/****************************************************************************/ +/** +* +* This macro calculates CAN message identifier value given identifier field +* values. +* +* @param StandardId contains Standard Message ID value. +* @param SubRemoteTransReq contains Substitute Remote Transmission +* Request value. +* @param IdExtension contains Identifier Extension value. +* @param ExtendedId contains Extended Message ID value. +* @param RemoteTransReq contains Remote Transmission Request value. +* +* @return Message Identifier value. +* +* @note C-Style signature: +* u32 XCanPs_CreateIdValue(u32 StandardId, +* u32 SubRemoteTransReq, +* u32 IdExtension, u32 ExtendedId, +* u32 RemoteTransReq) +* +* Read the CAN specification for meaning of each parameter. +* +*****************************************************************************/ +#define XCanPs_CreateIdValue(StandardId, SubRemoteTransReq, IdExtension, \ + ExtendedId, RemoteTransReq) \ + ((((StandardId) << XCANPS_IDR_ID1_SHIFT) & XCANPS_IDR_ID1_MASK) | \ + (((SubRemoteTransReq) << XCANPS_IDR_SRR_SHIFT) & XCANPS_IDR_SRR_MASK)|\ + (((IdExtension) << XCANPS_IDR_IDE_SHIFT) & XCANPS_IDR_IDE_MASK) | \ + (((ExtendedId) << XCANPS_IDR_ID2_SHIFT) & XCANPS_IDR_ID2_MASK) | \ + ((RemoteTransReq) & XCANPS_IDR_RTR_MASK)) + + +/****************************************************************************/ +/** +* +* This macro calculates value for Data Length Code register given Data +* Length Code value. +* +* @param DataLengCode indicates Data Length Code value. +* +* @return Value that can be assigned to Data Length Code register. +* +* @note C-Style signature: +* u32 XCanPs_CreateDlcValue(u32 DataLengCode) +* +* Read the CAN specification for meaning of Data Length Code. +* +*****************************************************************************/ +#define XCanPs_CreateDlcValue(DataLengCode) \ + (((DataLengCode) << XCANPS_DLCR_DLC_SHIFT) & XCANPS_DLCR_DLC_MASK) + + +/****************************************************************************/ +/** +* +* This macro clears the timestamp in the Timestamp Control Register. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return None. +* +* @note C-Style signature: +* void XCanPs_ClearTimestamp(XCanPs *InstancePtr) +* +*****************************************************************************/ +#define XCanPs_ClearTimestamp(InstancePtr) \ + XCanPs_WriteReg((InstancePtr)->CanConfig.BaseAddr, \ + XCANPS_TCR_OFFSET, XCANPS_TCR_CTS_MASK) + +/************************** Function Prototypes ******************************/ + +/* + * Functions in xcanps.c + */ +s32 XCanPs_CfgInitialize(XCanPs *InstancePtr, XCanPs_Config *ConfigPtr, + u32 EffectiveAddr); + +void XCanPs_Reset(XCanPs *InstancePtr); +u8 XCanPs_GetMode(XCanPs *InstancePtr); +void XCanPs_EnterMode(XCanPs *InstancePtr, u8 OperationMode); +u32 XCanPs_GetStatus(XCanPs *InstancePtr); +void XCanPs_GetBusErrorCounter(XCanPs *InstancePtr, u8 *RxErrorCount, + u8 *TxErrorCount); +u32 XCanPs_GetBusErrorStatus(XCanPs *InstancePtr); +void XCanPs_ClearBusErrorStatus(XCanPs *InstancePtr, u32 Mask); +s32 XCanPs_Send(XCanPs *InstancePtr, u32 *FramePtr); +s32 XCanPs_Recv(XCanPs *InstancePtr, u32 *FramePtr); +s32 XCanPs_SendHighPriority(XCanPs *InstancePtr, u32 *FramePtr); +void XCanPs_AcceptFilterEnable(XCanPs *InstancePtr, u32 FilterIndexes); +void XCanPs_AcceptFilterDisable(XCanPs *InstancePtr, u32 FilterIndexes); +u32 XCanPs_AcceptFilterGetEnabled(XCanPs *InstancePtr); +s32 XCanPs_AcceptFilterSet(XCanPs *InstancePtr, u32 FilterIndex, + u32 MaskValue, u32 IdValue); +void XCanPs_AcceptFilterGet(XCanPs *InstancePtr, u32 FilterIndex, + u32 *MaskValue, u32 *IdValue); + +s32 XCanPs_SetBaudRatePrescaler(XCanPs *InstancePtr, u8 Prescaler); +u8 XCanPs_GetBaudRatePrescaler(XCanPs *InstancePtr); +s32 XCanPs_SetBitTiming(XCanPs *InstancePtr, u8 SyncJumpWidth, + u8 TimeSegment2, u8 TimeSegment1); +void XCanPs_GetBitTiming(XCanPs *InstancePtr, u8 *SyncJumpWidth, + u8 *TimeSegment2, u8 *TimeSegment1); + +s32 XCanPs_SetRxIntrWatermark(XCanPs *InstancePtr, u8 Threshold); +u8 XCanPs_GetRxIntrWatermark(XCanPs *InstancePtr); +s32 XCanPs_SetTxIntrWatermark(XCanPs *InstancePtr, u8 Threshold); +u8 XCanPs_GetTxIntrWatermark(XCanPs *InstancePtr); + +/* + * Diagnostic functions in xcanps_selftest.c + */ +s32 XCanPs_SelfTest(XCanPs *InstancePtr); + +/* + * Functions in xcanps_intr.c + */ +void XCanPs_IntrEnable(XCanPs *InstancePtr, u32 Mask); +void XCanPs_IntrDisable(XCanPs *InstancePtr, u32 Mask); +u32 XCanPs_IntrGetEnabled(XCanPs *InstancePtr); +u32 XCanPs_IntrGetStatus(XCanPs *InstancePtr); +void XCanPs_IntrClear(XCanPs *InstancePtr, u32 Mask); +void XCanPs_IntrHandler(void *InstancePtr); +s32 XCanPs_SetHandler(XCanPs *InstancePtr, u32 HandlerType, + void *CallBackFunc, void *CallBackRef); + +/* + * Functions in xcanps_sinit.c + */ +XCanPs_Config *XCanPs_LookupConfig(u16 DeviceId); + +#ifdef __cplusplus +} +#endif + +#endif /* end of protection macro */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_g.c new file mode 100644 index 000000000..b45c5b2d6 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_g.c @@ -0,0 +1,55 @@ + +/******************************************************************* +* +* CAUTION: This file is automatically generated by HSI. +* Version: +* DO NOT EDIT. +* +* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.* +*Permission is hereby granted, free of charge, to any person obtaining a copy +*of this software and associated documentation files (the Software), to deal +*in the Software without restriction, including without limitation the rights +*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +*copies of the Software, and to permit persons to whom the Software is +*furnished to do so, subject to the following conditions: +* +*The above copyright notice and this permission notice shall be included in +*all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +*(a) running on a Xilinx device, or +*(b) that interact with a Xilinx device through a bus or interconnect. +* +*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT +*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +* +*Except as contained in this notice, the name of the Xilinx shall not be used +*in advertising or otherwise to promote the sale, use or other dealings in +*this Software without prior written authorization from Xilinx. +* + +* +* Description: Driver configuration +* +*******************************************************************/ + +#include "xparameters.h" +#include "xcanps.h" + +/* +* The configuration table for devices +*/ + +XCanPs_Config XCanPs_ConfigTable[] = +{ + { + XPAR_PSU_CAN_1_DEVICE_ID, + XPAR_PSU_CAN_1_BASEADDR + } +}; + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_hw.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_hw.c new file mode 100644 index 000000000..bbb96120a --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_hw.c @@ -0,0 +1,93 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcanps_hw.c +* @addtogroup canps_v3_0 +* @{ +* +* This file contains the implementation of the canps interface reset sequence +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.02a adk  08/08/13 First release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcanps_hw.h" +#include "xparameters.h" + +/************************** Constant Definitions *****************************/ + + +/**************************** Type Definitions *******************************/ + + +/***************** Macros (Inline Functions) Definitions *********************/ + + +/************************** Function Prototypes ******************************/ + +/*****************************************************************************/ +/** +* +* This function resets the CAN device. Calling this function resets the device +* immediately, and any pending transmission or reception is terminated at once. +* Both Object Layer and Transfer Layer are reset. This function does not reset +* the Physical Layer. All registers are reset to the default values, and no +* previous status will be restored. TX FIFO, RX FIFO and TX High Priority +* Buffer are also reset. +* +* The CAN device will be in Configuration Mode immediately after this function +* returns. +* +* @param BaseAddr is the baseaddress of the interface. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCanPs_ResetHw(u32 BaseAddr) +{ + XCanPs_WriteReg(BaseAddr, XCANPS_SRR_OFFSET, \ + XCANPS_SRR_SRST_MASK); +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_hw.h new file mode 100644 index 000000000..9fe681aaf --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_hw.h @@ -0,0 +1,369 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcanps_hw.h +* @addtogroup canps_v3_0 +* @{ +* +* This header file contains the identifiers and basic driver functions (or +* macros) that can be used to access the device. Other driver functions +* are defined in xcanps.h. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00a xd/sv  01/12/10 First release
+* 1.01a sbs    12/27/11 Updated the Register/bit definitions
+*                       Changed XCANPS_RXFWIR_RXFLL_MASK to XCANPS_WIR_FW_MASK
+*                       Changed XCANPS_RXWIR_OFFSET to XCANPS_WIR_OFFSET
+*			Added XCANPS_IXR_TXFEMP_MASK for Tx Fifo Empty
+*			Changed XCANPS_IXR_RXFLL_MASK to
+*			XCANPS_IXR_RXFWMFLL_MASK
+* 			Changed
+*			XCANPS_TXBUF_ID_OFFSET to XCANPS_TXHPB_ID_OFFSET
+* 			XCANPS_TXBUF_DLC_OFFSET to XCANPS_TXHPB_DLC_OFFSET
+*			XCANPS_TXBUF_DW1_OFFSET  to XCANPS_TXHPB_DW1_OFFSET
+*			XCANPS_TXBUF_DW2_OFFSET  to XCANPS_TXHPB_DW2_OFFSET
+* 1.02a adk   08/08/13  Updated for inclding the function prototype
+* 3.00  kvn   02/13/15  Modified code for MISRA-C:2012 compliance.
+*
+* +******************************************************************************/ + +#ifndef XCANPS_HW_H /* prevent circular inclusions */ +#define XCANPS_HW_H /* by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + + +/***************************** Include Files *********************************/ + +#include "xil_types.h" +#include "xil_assert.h" +#include "xil_io.h" + +/************************** Constant Definitions *****************************/ + +/** @name Register offsets for the CAN. Each register is 32 bits. + * @{ + */ +#define XCANPS_SRR_OFFSET 0x00000000U /**< Software Reset Register */ +#define XCANPS_MSR_OFFSET 0x00000004U /**< Mode Select Register */ +#define XCANPS_BRPR_OFFSET 0x00000008U /**< Baud Rate Prescaler */ +#define XCANPS_BTR_OFFSET 0x0000000CU /**< Bit Timing Register */ +#define XCANPS_ECR_OFFSET 0x00000010U /**< Error Counter Register */ +#define XCANPS_ESR_OFFSET 0x00000014U /**< Error Status Register */ +#define XCANPS_SR_OFFSET 0x00000018U /**< Status Register */ + +#define XCANPS_ISR_OFFSET 0x0000001CU /**< Interrupt Status Register */ +#define XCANPS_IER_OFFSET 0x00000020U /**< Interrupt Enable Register */ +#define XCANPS_ICR_OFFSET 0x00000024U /**< Interrupt Clear Register */ +#define XCANPS_TCR_OFFSET 0x00000028U /**< Timestamp Control Register */ +#define XCANPS_WIR_OFFSET 0x0000002CU /**< Watermark Interrupt Reg */ + +#define XCANPS_TXFIFO_ID_OFFSET 0x00000030U /**< TX FIFO ID */ +#define XCANPS_TXFIFO_DLC_OFFSET 0x00000034U /**< TX FIFO DLC */ +#define XCANPS_TXFIFO_DW1_OFFSET 0x00000038U /**< TX FIFO Data Word 1 */ +#define XCANPS_TXFIFO_DW2_OFFSET 0x0000003CU /**< TX FIFO Data Word 2 */ + +#define XCANPS_TXHPB_ID_OFFSET 0x00000040U /**< TX High Priority Buffer ID */ +#define XCANPS_TXHPB_DLC_OFFSET 0x00000044U /**< TX High Priority Buffer DLC */ +#define XCANPS_TXHPB_DW1_OFFSET 0x00000048U /**< TX High Priority Buf Data 1 */ +#define XCANPS_TXHPB_DW2_OFFSET 0x0000004CU /**< TX High Priority Buf Data Word 2 */ + +#define XCANPS_RXFIFO_ID_OFFSET 0x00000050U /**< RX FIFO ID */ +#define XCANPS_RXFIFO_DLC_OFFSET 0x00000054U /**< RX FIFO DLC */ +#define XCANPS_RXFIFO_DW1_OFFSET 0x00000058U /**< RX FIFO Data Word 1 */ +#define XCANPS_RXFIFO_DW2_OFFSET 0x0000005CU /**< RX FIFO Data Word 2 */ + +#define XCANPS_AFR_OFFSET 0x00000060U /**< Acceptance Filter Register */ +#define XCANPS_AFMR1_OFFSET 0x00000064U /**< Acceptance Filter Mask 1 */ +#define XCANPS_AFIR1_OFFSET 0x00000068U /**< Acceptance Filter ID 1 */ +#define XCANPS_AFMR2_OFFSET 0x0000006CU /**< Acceptance Filter Mask 2 */ +#define XCANPS_AFIR2_OFFSET 0x00000070U /**< Acceptance Filter ID 2 */ +#define XCANPS_AFMR3_OFFSET 0x00000074U /**< Acceptance Filter Mask 3 */ +#define XCANPS_AFIR3_OFFSET 0x00000078U /**< Acceptance Filter ID 3 */ +#define XCANPS_AFMR4_OFFSET 0x0000007CU /**< Acceptance Filter Mask 4 */ +#define XCANPS_AFIR4_OFFSET 0x00000080U /**< Acceptance Filter ID 4 */ +/* @} */ + +/** @name Software Reset Register (SRR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_SRR_CEN_MASK 0x00000002U /**< Can Enable */ +#define XCANPS_SRR_SRST_MASK 0x00000001U /**< Reset */ +/* @} */ + +/** @name Mode Select Register (MSR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_MSR_SNOOP_MASK 0x00000004U /**< Snoop Mode Select */ +#define XCANPS_MSR_LBACK_MASK 0x00000002U /**< Loop Back Mode Select */ +#define XCANPS_MSR_SLEEP_MASK 0x00000001U /**< Sleep Mode Select */ +/* @} */ + +/** @name Baud Rate Prescaler register (BRPR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_BRPR_BRP_MASK 0x000000FFU /**< Baud Rate Prescaler */ +/* @} */ + +/** @name Bit Timing Register (BTR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_BTR_SJW_MASK 0x00000180U /**< Synchronization Jump Width */ +#define XCANPS_BTR_SJW_SHIFT 7U +#define XCANPS_BTR_TS2_MASK 0x00000070U /**< Time Segment 2 */ +#define XCANPS_BTR_TS2_SHIFT 4U +#define XCANPS_BTR_TS1_MASK 0x0000000FU /**< Time Segment 1 */ +/* @} */ + +/** @name Error Counter Register (ECR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_ECR_REC_MASK 0x0000FF00U /**< Receive Error Counter */ +#define XCANPS_ECR_REC_SHIFT 8U +#define XCANPS_ECR_TEC_MASK 0x000000FFU /**< Transmit Error Counter */ +/* @} */ + +/** @name Error Status Register (ESR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_ESR_ACKER_MASK 0x00000010U /**< ACK Error */ +#define XCANPS_ESR_BERR_MASK 0x00000008U /**< Bit Error */ +#define XCANPS_ESR_STER_MASK 0x00000004U /**< Stuff Error */ +#define XCANPS_ESR_FMER_MASK 0x00000002U /**< Form Error */ +#define XCANPS_ESR_CRCER_MASK 0x00000001U /**< CRC Error */ +/* @} */ + +/** @name Status Register (SR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_SR_SNOOP_MASK 0x00001000U /**< Snoop Mask */ +#define XCANPS_SR_ACFBSY_MASK 0x00000800U /**< Acceptance Filter busy */ +#define XCANPS_SR_TXFLL_MASK 0x00000400U /**< TX FIFO is full */ +#define XCANPS_SR_TXBFLL_MASK 0x00000200U /**< TX High Priority Buffer full */ +#define XCANPS_SR_ESTAT_MASK 0x00000180U /**< Error Status */ +#define XCANPS_SR_ESTAT_SHIFT 7U +#define XCANPS_SR_ERRWRN_MASK 0x00000040U /**< Error Warning */ +#define XCANPS_SR_BBSY_MASK 0x00000020U /**< Bus Busy */ +#define XCANPS_SR_BIDLE_MASK 0x00000010U /**< Bus Idle */ +#define XCANPS_SR_NORMAL_MASK 0x00000008U /**< Normal Mode */ +#define XCANPS_SR_SLEEP_MASK 0x00000004U /**< Sleep Mode */ +#define XCANPS_SR_LBACK_MASK 0x00000002U /**< Loop Back Mode */ +#define XCANPS_SR_CONFIG_MASK 0x00000001U /**< Configuration Mode */ +/* @} */ + +/** @name Interrupt Status/Enable/Clear Register Bit Definitions and Masks + * @{ + */ +#define XCANPS_IXR_TXFEMP_MASK 0x00004000U /**< Tx Fifo Empty Interrupt */ +#define XCANPS_IXR_TXFWMEMP_MASK 0x00002000U /**< Tx Fifo Watermark Empty */ +#define XCANPS_IXR_RXFWMFLL_MASK 0x00001000U /**< Rx FIFO Watermark Full */ +#define XCANPS_IXR_WKUP_MASK 0x00000800U /**< Wake up Interrupt */ +#define XCANPS_IXR_SLP_MASK 0x00000400U /**< Sleep Interrupt */ +#define XCANPS_IXR_BSOFF_MASK 0x00000200U /**< Bus Off Interrupt */ +#define XCANPS_IXR_ERROR_MASK 0x00000100U /**< Error Interrupt */ +#define XCANPS_IXR_RXNEMP_MASK 0x00000080U /**< RX FIFO Not Empty Interrupt */ +#define XCANPS_IXR_RXOFLW_MASK 0x00000040U /**< RX FIFO Overflow Interrupt */ +#define XCANPS_IXR_RXUFLW_MASK 0x00000020U /**< RX FIFO Underflow Interrupt */ +#define XCANPS_IXR_RXOK_MASK 0x00000010U /**< New Message Received Intr */ +#define XCANPS_IXR_TXBFLL_MASK 0x00000008U /**< TX High Priority Buf Full */ +#define XCANPS_IXR_TXFLL_MASK 0x00000004U /**< TX FIFO Full Interrupt */ +#define XCANPS_IXR_TXOK_MASK 0x00000002U /**< TX Successful Interrupt */ +#define XCANPS_IXR_ARBLST_MASK 0x00000001U /**< Arbitration Lost Interrupt */ +#define XCANPS_IXR_ALL ((u32)XCANPS_IXR_RXFWMFLL_MASK | \ + (u32)XCANPS_IXR_WKUP_MASK | \ + (u32)XCANPS_IXR_SLP_MASK | \ + (u32)XCANPS_IXR_BSOFF_MASK | \ + (u32)XCANPS_IXR_ERROR_MASK | \ + (u32)XCANPS_IXR_RXNEMP_MASK | \ + (u32)XCANPS_IXR_RXOFLW_MASK | \ + (u32)XCANPS_IXR_RXUFLW_MASK | \ + (u32)XCANPS_IXR_RXOK_MASK | \ + (u32)XCANPS_IXR_TXBFLL_MASK | \ + (u32)XCANPS_IXR_TXFLL_MASK | \ + (u32)XCANPS_IXR_TXOK_MASK | \ + (u32)XCANPS_IXR_ARBLST_MASK) +/* @} */ + +/** @name CAN Timestamp Control Register (TCR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_TCR_CTS_MASK 0x00000001U /**< Clear Timestamp counter mask */ +/* @} */ + +/** @name CAN Watermark Register (WIR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_WIR_FW_MASK 0x0000003FU /**< Rx Full Threshold mask */ +#define XCANPS_WIR_EW_MASK 0x00003F00U /**< Tx Empty Threshold mask */ +#define XCANPS_WIR_EW_SHIFT 0x00000008U /**< Tx Empty Threshold shift */ + +/* @} */ + +/** @name CAN Frame Identifier (TX High Priority Buffer/TX/RX/Acceptance Filter + Mask/Acceptance Filter ID) + * @{ + */ +#define XCANPS_IDR_ID1_MASK 0xFFE00000U /**< Standard Messg Identifier */ +#define XCANPS_IDR_ID1_SHIFT 21U +#define XCANPS_IDR_SRR_MASK 0x00100000U /**< Substitute Remote TX Req */ +#define XCANPS_IDR_SRR_SHIFT 20U +#define XCANPS_IDR_IDE_MASK 0x00080000U /**< Identifier Extension */ +#define XCANPS_IDR_IDE_SHIFT 19U +#define XCANPS_IDR_ID2_MASK 0x0007FFFEU /**< Extended Message Ident */ +#define XCANPS_IDR_ID2_SHIFT 1U +#define XCANPS_IDR_RTR_MASK 0x00000001U /**< Remote TX Request */ +/* @} */ + +/** @name CAN Frame Data Length Code (TX High Priority Buffer/TX/RX) + * @{ + */ +#define XCANPS_DLCR_DLC_MASK 0xF0000000U /**< Data Length Code */ +#define XCANPS_DLCR_DLC_SHIFT 28U +#define XCANPS_DLCR_TIMESTAMP_MASK 0x0000FFFFU /**< Timestamp Mask (Rx only) */ + +/* @} */ + +/** @name CAN Frame Data Word 1 (TX High Priority Buffer/TX/RX) + * @{ + */ +#define XCANPS_DW1R_DB0_MASK 0xFF000000U /**< Data Byte 0 */ +#define XCANPS_DW1R_DB0_SHIFT 24U +#define XCANPS_DW1R_DB1_MASK 0x00FF0000U /**< Data Byte 1 */ +#define XCANPS_DW1R_DB1_SHIFT 16U +#define XCANPS_DW1R_DB2_MASK 0x0000FF00U /**< Data Byte 2 */ +#define XCANPS_DW1R_DB2_SHIFT 8U +#define XCANPS_DW1R_DB3_MASK 0x000000FFU /**< Data Byte 3 */ +/* @} */ + +/** @name CAN Frame Data Word 2 (TX High Priority Buffer/TX/RX) + * @{ + */ +#define XCANPS_DW2R_DB4_MASK 0xFF000000U /**< Data Byte 4 */ +#define XCANPS_DW2R_DB4_SHIFT 24U +#define XCANPS_DW2R_DB5_MASK 0x00FF0000U /**< Data Byte 5 */ +#define XCANPS_DW2R_DB5_SHIFT 16U +#define XCANPS_DW2R_DB6_MASK 0x0000FF00U /**< Data Byte 6 */ +#define XCANPS_DW2R_DB6_SHIFT 8U +#define XCANPS_DW2R_DB7_MASK 0x000000FFU /**< Data Byte 7 */ +/* @} */ + +/** @name Acceptance Filter Register (AFR) Bit Definitions and Masks + * @{ + */ +#define XCANPS_AFR_UAF4_MASK 0x00000008U /**< Use Acceptance Filter No.4 */ +#define XCANPS_AFR_UAF3_MASK 0x00000004U /**< Use Acceptance Filter No.3 */ +#define XCANPS_AFR_UAF2_MASK 0x00000002U /**< Use Acceptance Filter No.2 */ +#define XCANPS_AFR_UAF1_MASK 0x00000001U /**< Use Acceptance Filter No.1 */ +#define XCANPS_AFR_UAF_ALL_MASK ((u32)XCANPS_AFR_UAF4_MASK | \ + (u32)XCANPS_AFR_UAF3_MASK | \ + (u32)XCANPS_AFR_UAF2_MASK | \ + (u32)XCANPS_AFR_UAF1_MASK) +/* @} */ + +/** @name CAN frame length constants + * @{ + */ +#define XCANPS_MAX_FRAME_SIZE sizeof(u32)*16U /**< Maximum CAN frame length in bytes */ +/* @} */ + +/* For backwards compatibilty */ +#define XCANPS_TXBUF_ID_OFFSET XCANPS_TXHPB_ID_OFFSET +#define XCANPS_TXBUF_DLC_OFFSET XCANPS_TXHPB_DLC_OFFSET +#define XCANPS_TXBUF_DW1_OFFSET XCANPS_TXHPB_DW1_OFFSET +#define XCANPS_TXBUF_DW2_OFFSET XCANPS_TXHPB_DW2_OFFSET + +#define XCANPS_RXFWIR_RXFLL_MASK XCANPS_WIR_FW_MASK +#define XCANPS_RXWIR_OFFSET XCANPS_WIR_OFFSET +#define XCANPS_IXR_RXFLL_MASK XCANPS_IXR_RXFWMFLL_MASK + + + + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/****************************************************************************/ +/** +* +* This macro reads the given register. +* +* @param BaseAddr is the base address of the device. +* @param RegOffset is the register offset to be read. +* +* @return The 32-bit value of the register +* +* @note None. +* +*****************************************************************************/ +#define XCanPs_ReadReg(BaseAddr, RegOffset) \ + Xil_In32((BaseAddr) + (u32)(RegOffset)) + + +/****************************************************************************/ +/** +* +* This macro writes the given register. +* +* @param BaseAddr is the base address of the device. +* @param RegOffset is the register offset to be written. +* @param Data is the 32-bit value to write to the register. +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XCanPs_WriteReg(BaseAddr, RegOffset, Data) \ + Xil_Out32((BaseAddr) + (u32)(RegOffset), (u32)(Data)) + +/************************** Function Prototypes ******************************/ +/* + * Perform reset operation to the CanPs interface + */ +void XCanPs_ResetHw(u32 BaseAddr); + +#ifdef __cplusplus +} +#endif + +#endif /* end of protection macro */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_intr.c new file mode 100644 index 000000000..f6721ca75 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_intr.c @@ -0,0 +1,421 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcanps_intr.c +* @addtogroup canps_v3_0 +* @{ +* +* This file contains functions related to CAN interrupt handling. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00a xd/sv  01/12/10 First release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1   nsk    12/21/15 Updated XCanPs_IntrHandler to handle error
+*			interrupts correctly. CR#925615
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcanps.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Variable Definitions *****************************/ + +/************************** Function Prototypes ******************************/ + +/****************************************************************************/ +/** +* +* This routine enables interrupt(s). Use the XCANPS_IXR_* constants defined in +* xcanps_hw.h to create the bit-mask to enable interrupts. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param Mask is the mask to enable. Bit positions of 1 will be enabled. +* Bit positions of 0 will keep the previous setting. This mask is +* formed by OR'ing XCANPS_IXR_* bits defined in xcanps_hw.h. +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +void XCanPs_IntrEnable(XCanPs *InstancePtr, u32 Mask) +{ + u32 IntrValue; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + /* + * Write to the IER to enable the specified interrupts. + */ + IntrValue = XCanPs_IntrGetEnabled(InstancePtr); + IntrValue |= Mask; + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_IER_OFFSET, IntrValue); +} + +/****************************************************************************/ +/** +* +* This routine disables interrupt(s). Use the XCANPS_IXR_* constants defined in +* xcanps_hw.h to create the bit-mask to disable interrupt(s). +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param Mask is the mask to disable. Bit positions of 1 will be +* disabled. Bit positions of 0 will keep the previous setting. +* This mask is formed by OR'ing XCANPS_IXR_* bits defined in +* xcanps_hw.h. +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +void XCanPs_IntrDisable(XCanPs *InstancePtr, u32 Mask) +{ + u32 IntrValue; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + /* + * Write to the IER to disable the specified interrupts. + */ + IntrValue = XCanPs_IntrGetEnabled(InstancePtr); + IntrValue &= ~Mask; + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_IER_OFFSET, IntrValue); +} + +/****************************************************************************/ +/** +* +* This routine returns enabled interrupt(s). Use the XCANPS_IXR_* constants +* defined in xcanps_hw.h to interpret the returned value. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return Enabled interrupt(s) in a 32-bit format. +* +* @note None. +* +*****************************************************************************/ +u32 XCanPs_IntrGetEnabled(XCanPs *InstancePtr) +{ + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + return XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_IER_OFFSET); +} + + +/****************************************************************************/ +/** +* +* This routine returns interrupt status read from Interrupt Status Register. +* Use the XCANPS_IXR_* constants defined in xcanps_hw.h to interpret the +* returned value. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return The value stored in Interrupt Status Register. +* +* @note None. +* +*****************************************************************************/ +u32 XCanPs_IntrGetStatus(XCanPs *InstancePtr) +{ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + return XCanPs_ReadReg(InstancePtr->CanConfig.BaseAddr, + XCANPS_ISR_OFFSET); +} + +/****************************************************************************/ +/** +* +* This function clears interrupt(s). Every bit set in Interrupt Status +* Register indicates that a specific type of interrupt is occurring, and this +* function clears one or more interrupts by writing a bit mask to Interrupt +* Clear Register. +* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param Mask is the mask to clear. Bit positions of 1 will be cleared. +* Bit positions of 0 will not change the previous interrupt +* status. This mask is formed by OR'ing XCANPS_IXR_* bits defined +* in xcanps_hw.h. +* +* @note None. +* +*****************************************************************************/ +void XCanPs_IntrClear(XCanPs *InstancePtr, u32 Mask) +{ + u32 IntrValue; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + /* + * Clear the currently pending interrupts. + */ + IntrValue = XCanPs_IntrGetStatus(InstancePtr); + IntrValue &= Mask; + XCanPs_WriteReg(InstancePtr->CanConfig.BaseAddr, XCANPS_ICR_OFFSET, + IntrValue); +} + +/*****************************************************************************/ +/** +* +* This routine is the interrupt handler for the CAN driver. +* +* This handler reads the interrupt status from the ISR, determines the source of +* the interrupts, calls according callbacks, and finally clears the interrupts. +* +* Application beyond this driver is responsible for providing callbacks to +* handle interrupts and installing the callbacks using XCanPs_SetHandler() +* during initialization phase. An example delivered with this driver +* demonstrates how this could be done. +* +* @param InstancePtr is a pointer to the XCanPs instance that just +* interrupted. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCanPs_IntrHandler(void *InstancePtr) +{ + u32 PendingIntr; + u32 EventIntr; + u32 ErrorStatus; + XCanPs *CanPtr = (XCanPs *) ((void *)InstancePtr); + + Xil_AssertVoid(CanPtr != NULL); + Xil_AssertVoid(CanPtr->IsReady == XIL_COMPONENT_IS_READY); + + PendingIntr = XCanPs_IntrGetStatus(CanPtr); + PendingIntr &= XCanPs_IntrGetEnabled(CanPtr); + + /* + * Clear all pending interrupts. + * Rising Edge interrupt + */ + XCanPs_IntrClear(CanPtr, PendingIntr); + + /* + * An error interrupt is occurring. + */ + if (((PendingIntr & XCANPS_IXR_ERROR_MASK) != (u32)0) && + (CanPtr->ErrorHandler != NULL)) { + ErrorStatus = XCanPs_GetBusErrorStatus(CanPtr); + CanPtr->ErrorHandler(CanPtr->ErrorRef,ErrorStatus); + /* + * Clear Error Status Register. + */ + XCanPs_ClearBusErrorStatus(CanPtr,ErrorStatus); + } + + /* + * Check if any following event interrupt is pending: + * - RX FIFO Overflow + * - RX FIFO Underflow + * - TX High Priority Buffer full + * - TX FIFO Full + * - Wake up from sleep mode + * - Enter sleep mode + * - Enter Bus off status + * - Arbitration is lost + * + * If so, call event callback provided by upper level. + */ + EventIntr = PendingIntr & ((u32)XCANPS_IXR_RXOFLW_MASK | + (u32)XCANPS_IXR_RXUFLW_MASK | + (u32)XCANPS_IXR_TXBFLL_MASK | + (u32)XCANPS_IXR_TXFLL_MASK | + (u32)XCANPS_IXR_WKUP_MASK | + (u32)XCANPS_IXR_SLP_MASK | + (u32)XCANPS_IXR_BSOFF_MASK | + (u32)XCANPS_IXR_ARBLST_MASK); + if ((EventIntr != (u32)0) && (CanPtr->EventHandler != NULL)) { + CanPtr->EventHandler(CanPtr->EventRef, EventIntr); + + if ((EventIntr & XCANPS_IXR_BSOFF_MASK) != (u32)0) { + /* + * Event callback should reset whole device if "Enter + * Bus Off Status" interrupt occurred. All pending + * interrupts are cleared and no further checking and + * handling of other interrupts is needed any more. + */ + return; + } else { + /*This else was made for misra-c compliance*/ + ; + } + } + + + if (((PendingIntr & (XCANPS_IXR_RXFWMFLL_MASK | + XCANPS_IXR_RXNEMP_MASK)) != (u32)0) && + (CanPtr->RecvHandler != NULL)) { + + /* + * This case happens when + * A number of frames depending on the Rx FIFO Watermark + * threshold are received. + * And also when frame was received and is sitting in RX FIFO. + * + * XCANPS_IXR_RXOK_MASK is not used because the bit is set + * just once even if there are multiple frames sitting + * in the RX FIFO. + * + * XCANPS_IXR_RXNEMP_MASK is used because the bit can be + * set again and again automatically as long as there is + * at least one frame in RX FIFO. + */ + CanPtr->RecvHandler(CanPtr->RecvRef); + } + + /* + * A frame was transmitted successfully. + */ + if (((PendingIntr & (XCANPS_IXR_TXOK_MASK | XCANPS_IXR_TXFWMEMP_MASK)) != (u32)0) && + (CanPtr->SendHandler != NULL)) { + CanPtr->SendHandler(CanPtr->SendRef); + } +} + + +/*****************************************************************************/ +/** +* +* This routine installs an asynchronous callback function for the given +* HandlerType: +* +* 
+* HandlerType			Callback Function Type
+* -----------------------	------------------------
+* XCANPS_HANDLER_SEND		XCanPs_SendRecvHandler
+* XCANPS_HANDLER_RECV		XCanPs_SendRecvHandler
+* XCANPS_HANDLER_ERROR		XCanPs_ErrorHandler
+* XCANPS_HANDLER_EVENT		XCanPs_EventHandler
+*
+* HandlerType			Invoked by this driver when:
+* -------------------------------------------------------------------------
+* XCANPS_HANDLER_SEND		A frame transmitted by a call to
+*				XCanPs_Send() has been sent successfully.
+*
+* XCANPS_HANDLER_RECV		A frame(s) has been received and is sitting in
+*				the RX FIFO.
+*
+* XCANPS_HANDLER_ERROR		An error interrupt is occurring.
+*
+* XCANPS_HANDLER_EVENT		Any other kind of interrupt is occurring.
+*
+* +* @param InstancePtr is a pointer to the XCanPs instance. +* @param HandlerType specifies which handler is to be attached. +* @param CallBackFunc is the address of the callback function. +* @param CallBackRef is a user data item that will be passed to the +* callback function when it is invoked. +* +* @return +* - XST_SUCCESS when handler is installed. +* - XST_INVALID_PARAM when HandlerType is invalid. +* +* @note +* Invoking this function for a handler that already has been installed replaces +* it with the new handler. +* +******************************************************************************/ +s32 XCanPs_SetHandler(XCanPs *InstancePtr, u32 HandlerType, + void *CallBackFunc, void *CallBackRef) +{ + s32 Status; + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + switch (HandlerType) { + case XCANPS_HANDLER_SEND: + InstancePtr->SendHandler = + (XCanPs_SendRecvHandler) CallBackFunc; + InstancePtr->SendRef = CallBackRef; + Status = XST_SUCCESS; + break; + + case XCANPS_HANDLER_RECV: + InstancePtr->RecvHandler = + (XCanPs_SendRecvHandler) CallBackFunc; + InstancePtr->RecvRef = CallBackRef; + Status = XST_SUCCESS; + break; + + case XCANPS_HANDLER_ERROR: + InstancePtr->ErrorHandler = + (XCanPs_ErrorHandler) CallBackFunc; + InstancePtr->ErrorRef = CallBackRef; + Status = XST_SUCCESS; + break; + + case XCANPS_HANDLER_EVENT: + InstancePtr->EventHandler = + (XCanPs_EventHandler) CallBackFunc; + InstancePtr->EventRef = CallBackRef; + Status = XST_SUCCESS; + break; + + default: + Status = XST_INVALID_PARAM; + break; + } + return Status; +} + +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_selftest.c new file mode 100644 index 000000000..8bc77d7f4 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_selftest.c @@ -0,0 +1,234 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcanps_selftest.c +* @addtogroup canps_v3_0 +* @{ +* +* This file contains a diagnostic self-test function for the XCanPs driver. +* +* Read xcanps.h file for more information. +* +* @note +* The Baud Rate Prescaler Register (BRPR) and Bit Timing Register(BTR) +* are setup such that CAN baud rate equals 40Kbps, given the CAN clock +* equal to 24MHz. These need to be changed based on the desired baudrate +* and CAN clock frequency. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00a xd/sv  01/12/10 First release
+* 2.1 adk 		23/08/14 Fixed CR:798792 Peripheral test for CANPS IP in
+*						 SDK claims a 40kbps baud rate but it's not.
+* 3.00  kvn    02/13/15 Modified code for MISRA_C:2012 compliance.
+*
+* +*****************************************************************************/ + +/***************************** Include Files ********************************/ + +#include "xstatus.h" +#include "xcanps.h" + +/************************** Constant Definitions ****************************/ + +#define XCANPS_MAX_FRAME_SIZE_IN_WORDS ((XCANPS_MAX_FRAME_SIZE) / (sizeof(u32))) + +#define FRAME_DATA_LENGTH 8U /* Frame Data field length */ + +/**************************** Type Definitions ******************************/ + +/***************** Macros (Inline Functions) Definitions ********************/ + +/************************** Variable Definitions ****************************/ + +/* + * Buffers to hold frames to send and receive. These are declared as global so + * that they are not on the stack. + */ +static u32 TxFrame[XCANPS_MAX_FRAME_SIZE_IN_WORDS]; +static u32 RxFrame[XCANPS_MAX_FRAME_SIZE_IN_WORDS]; + +/************************** Function Prototypes *****************************/ + +/*****************************************************************************/ +/** +* +* This function runs a self-test on the CAN driver/device. The test resets +* the device, sets up the Loop Back mode, sends a standard frame, receives the +* frame, verifies the contents, and resets the device again. +* +* Note that this is a destructive test in that resets of the device are +* performed. Refer the device specification for the device status after +* the reset operation. +* +* +* @param InstancePtr is a pointer to the XCanPs instance. +* +* @return +* - XST_SUCCESS if the self-test passed. i.e., the frame +* received via the internal loop back has the same contents as +* the frame sent. +* - XST_FAILURE Otherwise. +* +* @note +* +* If the CAN device does not work properly, this function may enter an +* infinite loop and will never return to the caller. +*

+* If XST_FAILURE is returned, the device is not reset so that the caller could +* have a chance to check reason(s) causing the failure. +* +******************************************************************************/ +s32 XCanPs_SelfTest(XCanPs *InstancePtr) +{ + u8 *FramePtr; + s32 Status; + u32 Index; + u8 GetModeResult; + u32 RxEmptyResult; + + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY); + + XCanPs_Reset(InstancePtr); + + /* + * The device should enter Configuration Mode immediately after + * reset above is finished. Now check the mode and return error code if + * it is not Configuration Mode. + */ + if (XCanPs_GetMode(InstancePtr) != XCANPS_MODE_CONFIG) { + Status = XST_FAILURE; + return Status; + } + + /* + * Setup Baud Rate Prescaler Register (BRPR) and Bit Timing Register + * (BTR) such that CAN baud rate equals 40Kbps, given the CAN clock + * equal to 24MHz. For more information see the CAN 2.0A, CAN 2.0B, + * ISO 11898-1 specifications. + */ + (void)XCanPs_SetBaudRatePrescaler(InstancePtr, (u8)29U); + (void)XCanPs_SetBitTiming(InstancePtr, (u8)3U, (u8)2U, (u8)15U); + + /* + * Enter the loop back mode. + */ + XCanPs_EnterMode(InstancePtr, XCANPS_MODE_LOOPBACK); + GetModeResult = XCanPs_GetMode(InstancePtr); + while (GetModeResult != ((u8)XCANPS_MODE_LOOPBACK)) { + GetModeResult = XCanPs_GetMode(InstancePtr); + } + + /* + * Create a frame to send with known values so we can verify them + * on receive. + */ + TxFrame[0] = (u32)XCanPs_CreateIdValue((u32)2000U, (u32)0U, (u32)0U, (u32)0U, (u32)0U); + TxFrame[1] = (u32)XCanPs_CreateDlcValue((u32)8U); + + FramePtr = (u8 *)((void *)(&TxFrame[2])); + for (Index = 0U; Index < 8U; Index++) { + if(*FramePtr != 0U) { + *FramePtr = (u8)Index; + *FramePtr++; + } + } + + /* + * Send the frame. + */ + Status = XCanPs_Send(InstancePtr, TxFrame); + if (Status != (s32)XST_SUCCESS) { + Status = XST_FAILURE; + return Status; + } + + /* + * Wait until the frame arrives RX FIFO via internal loop back. + */ + RxEmptyResult = XCanPs_ReadReg(((InstancePtr)->CanConfig.BaseAddr), + XCANPS_ISR_OFFSET) & XCANPS_IXR_RXNEMP_MASK; + + while (RxEmptyResult == (u32)0U) { + RxEmptyResult = XCanPs_ReadReg(((InstancePtr)->CanConfig.BaseAddr), + XCANPS_ISR_OFFSET) & XCANPS_IXR_RXNEMP_MASK; + } + + /* + * Receive the frame. + */ + Status = XCanPs_Recv(InstancePtr, RxFrame); + if (Status != (s32)XST_SUCCESS) { + Status = XST_FAILURE; + return Status; + } + + /* + * Verify Identifier and Data Length Code. + */ + if (RxFrame[0] != + (u32)XCanPs_CreateIdValue((u32)2000U, (u32)0U, (u32)0U, (u32)0U, (u32)0U)) { + Status = XST_FAILURE; + return Status; + } + + if ((RxFrame[1] & ~XCANPS_DLCR_TIMESTAMP_MASK) != TxFrame[1]) { + Status = XST_FAILURE; + return Status; + } + + + for (Index = 2U; Index < (XCANPS_MAX_FRAME_SIZE_IN_WORDS); Index++) { + if (RxFrame[Index] != TxFrame[Index]) { + Status = XST_FAILURE; + return Status; + } + } + + /* + * Reset device again before returning to the caller. + */ + XCanPs_Reset(InstancePtr); + + Status = XST_SUCCESS; + return Status; +} + + +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_sinit.c new file mode 100644 index 000000000..230c429b3 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/canps_v3_1/src/xcanps_sinit.c @@ -0,0 +1,103 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcanps_sinit.c +* @addtogroup canps_v3_0 +* @{ +* +* This file contains the implementation of the XCanPs driver's static +* initialization functionality. +* +* @note None. +* +* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00a xd/sv  01/12/10 First release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcanps.h" +#include "xparameters.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +/************************** Variable Definitions *****************************/ + +extern XCanPs_Config XCanPs_ConfigTable[XPAR_XCANPS_NUM_INSTANCES]; + +/*****************************************************************************/ +/** +* +* This function looks for the device configuration based on the unique device +* ID. The table XCanPs_ConfigTable[] contains the configuration information for +* each device in the system. +* +* @param DeviceId is the unique device ID of the device being looked up. +* +* @return A pointer to the configuration table entry corresponding to the +* given device ID, or NULL if no match is found. +* +* @note None. +* +******************************************************************************/ +XCanPs_Config *XCanPs_LookupConfig(u16 DeviceId) +{ + XCanPs_Config *CfgPtr = NULL; + u32 Index; + + for (Index = 0U; Index < (u32)XPAR_XCANPS_NUM_INSTANCES; Index++) { + if (XCanPs_ConfigTable[Index].DeviceId == DeviceId) { + CfgPtr = &XCanPs_ConfigTable[Index]; + break; + } + } + + return (XCanPs_Config *)CfgPtr; +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/Makefile new file mode 100644 index 000000000..007162d8c --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/Makefile @@ -0,0 +1,40 @@ +COMPILER= +ARCHIVER= +CP=cp +COMPILER_FLAGS= +EXTRA_COMPILER_FLAGS= +LIB=libxil.a + +CC_FLAGS = $(COMPILER_FLAGS) +ECC_FLAGS = $(EXTRA_COMPILER_FLAGS) + +RELEASEDIR=../../../lib +INCLUDEDIR=../../../include +INCLUDES=-I./. -I${INCLUDEDIR} + +OUTS = *.o + +LIBSOURCES:=*.c +INCLUDEFILES:=*.h + +OBJECTS = $(addsuffix .o, $(basename $(wildcard *.c))) + +libs: banner coresightps_dcc_comp_libs clean + +%.o: %.c + ${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $< + +banner: + echo "Compiling coresightps_dcc" + +coresightps_dcc_comp_libs: ${OBJECTS} + $(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS} + +.PHONY: include +include: coresightps_dcc_includes + +coresightps_dcc_includes: + ${CP} ${INCLUDEFILES} ${INCLUDEDIR} + +clean: + rm -rf ${OBJECTS} diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/xcoresightpsdcc.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/xcoresightpsdcc.c new file mode 100644 index 000000000..e999f6f5d --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/xcoresightpsdcc.c @@ -0,0 +1,181 @@ +/****************************************************************************** +* +* Copyright (C) 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcoresightpsdcc.c +* @addtogroup coresightps_dcc_v1_1 +* @{ +* +* Functions in this file are the minimum required functions for the +* XCoreSightPs driver. +* +* @note None. +* +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date		Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00  kvn    02/14/15 First release
+* 1.1   kvn    06/12/15 Add support for Zynq Ultrascale+ MP.
+*       kvn    08/18/15 Modified Makefile according to compiler changes.
+* 1.2   kvn    10/09/15 Add support for IAR Compiler.
+*
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include +#include + +#ifdef __ICCARM__ +#define INLINE +#else +#define INLINE __inline +#endif + +/* DCC Status Bits */ +#define XCORESIGHTPS_DCC_STATUS_RX (1 << 30) +#define XCORESIGHTPS_DCC_STATUS_TX (1 << 29) + +static INLINE u32 XCoresightPs_DccGetStatus(void); + +/****************************************************************************/ +/** +* +* This functions sends a single byte using the DCC. It is blocking in that it +* waits for the transmitter to become non-full before it writes the byte to +* the transmit register. +* +* @param BaseAddress is a dummy parameter to match the function proto +* of functions for other stdio devices. +* @param Data is the byte of data to send +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCoresightPs_DccSendByte(u32 BaseAddress, u8 Data) +{ + (void) BaseAddress; + while (XCoresightPs_DccGetStatus() & XCORESIGHTPS_DCC_STATUS_TX) + dsb(); +#ifdef __aarch64__ + asm volatile ("msr dbgdtrtx_el0, %0" : : "r" (Data)); +#elif defined (__GNUC__) || defined (__ICCARM__) + asm volatile("mcr p14, 0, %0, c0, c5, 0" + : : "r" (Data)); +#else + { + volatile register u32 Reg __asm("cp14:0:c0:c5:0"); + Reg = Data; + } +#endif + isb(); + +} + +/****************************************************************************/ +/** +* +* This functions receives a single byte using the DCC. It is blocking in that +* it waits for the receiver to become non-empty before it reads from the +* receive register. +* +* @param BaseAddress is a dummy parameter to match the function proto +* of functions for other stdio devices. +* +* @return The byte of data received. +* +* @note None. +* +******************************************************************************/ +u8 XCoresightPs_DccRecvByte(u32 BaseAddress) +{ + u8 Data; + (void) BaseAddress; + + while (!(XCoresightPs_DccGetStatus() & XCORESIGHTPS_DCC_STATUS_RX)) + dsb(); + +#ifdef __aarch64__ + asm volatile ("mrs %0, dbgdtrrx_el0" : "=r" (Data)); +#elif defined (__GNUC__) || defined (__ICCARM__) + asm volatile("mrc p14, 0, %0, c0, c5, 0" + : "=r" (Data)); +#else + { + volatile register u32 Reg __asm("cp14:0:c0:c5:0"); + Data = Reg; + } +#endif + isb(); + + return Data; +} + + +/****************************************************************************/ +/**INLINE +* +* This functions read the status register of the DCC. +* +* @param BaseAddress is the base address of the device +* +* @return The contents of the Status Register. +* +* @note None. +* +******************************************************************************/ +static INLINE u32 XCoresightPs_DccGetStatus(void) +{ + u32 Status; + +#ifdef __aarch64__ + asm volatile ("mrs %0, mdccsr_el0" : "=r" (Status)); +#elif defined (__GNUC__) || defined (__ICCARM__) + asm volatile("mrc p14, 0, %0, c0, c1, 0" + : "=r" (Status) : : "cc"); +#else + { + volatile register u32 Reg __asm("cp14:0:c0:c1:0"); + Status = Reg; + } +#endif + return Status; +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/xcoresightpsdcc.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/xcoresightpsdcc.h new file mode 100644 index 000000000..6bab7ae09 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/coresightps_dcc_v1_2/src/xcoresightpsdcc.h @@ -0,0 +1,70 @@ +/****************************************************************************** +* +* Copyright (C) 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcoresightpsdcc.h +* @addtogroup coresightps_dcc_v1_1 +* @{ +* @details +* +* CoreSight driver component. +* +* The coresight is a part of debug communication channel (DCC) group. Jtag UART +* for ARM uses DCC. Each ARM core has its own DCC, so one need to select an +* ARM target in XSDB console before running the jtag terminal command. Using the +* coresight driver component, the output stream can be directed to a log file. +* +* @note None. +* +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date		Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00  kvn    02/14/15 First release
+* 1.1   kvn    06/12/15 Add support for Zynq Ultrascale+ MP.
+*       kvn    08/18/15 Modified Makefile according to compiler changes.
+*
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include + +void XCoresightPs_DccSendByte(u32 BaseAddress, u8 Data); + +u8 XCoresightPs_DccRecvByte(u32 BaseAddress); +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/cpu_cortexr5_v1_1/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/cpu_cortexr5_v1_1/src/Makefile new file mode 100644 index 000000000..648f83a29 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/cpu_cortexr5_v1_1/src/Makefile @@ -0,0 +1,22 @@ +COMPILER= +ARCHIVER= +CP=cp +COMPILER_FLAGS= +EXTRA_COMPILER_FLAGS= +LIB=libxil.a + +RELEASEDIR=../../../lib +INCLUDEDIR=../../../include +INCLUDES=-I${INCLUDEDIR} + +OUTS = *.o + +LIBSOURCES=*.c +INCLUDEFILES=*.h + +libs: + echo "Compiling cpu_cortexr5" + +.PHONY: include +include: + ${CP} $(INCLUDEFILES) $(INCLUDEDIR) diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/cpu_cortexr5_v1_1/src/xcpu_cortexr5.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/cpu_cortexr5_v1_1/src/xcpu_cortexr5.h new file mode 100644 index 000000000..7b21dcd21 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/cpu_cortexr5_v1_1/src/xcpu_cortexr5.h @@ -0,0 +1,43 @@ +/****************************************************************************** +* +* Copyright (C) 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcpu_cortexr5.h +* @addtogroup cpu_cortexr5_v1_1 +* @{ +* @details +* +* dummy file +* +******************************************************************************/ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/Makefile new file mode 100644 index 000000000..778797bcf --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/Makefile @@ -0,0 +1,40 @@ +COMPILER= +ARCHIVER= +CP=cp +COMPILER_FLAGS= +EXTRA_COMPILER_FLAGS= +LIB=libxil.a + +CC_FLAGS = $(COMPILER_FLAGS) +ECC_FLAGS = $(EXTRA_COMPILER_FLAGS) + +RELEASEDIR=../../../lib +INCLUDEDIR=../../../include +INCLUDES=-I./. -I${INCLUDEDIR} + +OUTS = *.o + +LIBSOURCES:=*.c +INCLUDEFILES:=*.h + +OBJECTS = $(addsuffix .o, $(basename $(wildcard *.c))) + +libs: banner csudma_libs clean + +%.o: %.c + ${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $< + +banner: + echo "Compiling csudma" + +csudma_libs: ${OBJECTS} + $(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS} + +.PHONY: include +include: csudma_includes + +csudma_includes: + ${CP} ${INCLUDEFILES} ${INCLUDEDIR} + +clean: + rm -rf ${OBJECTS} diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma.c new file mode 100644 index 000000000..2f6a62e50 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma.c @@ -0,0 +1,767 @@ +/****************************************************************************** +* +* Copyright (C) 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ + +/*****************************************************************************/ +/** +* +* @file xcsudma.c +* @addtogroup csudma_v1_0 +* @{ +* +* This file contains the implementation of the interface functions for CSU_DMA +* driver. Refer to the header file xcsudma.h for more detailed information. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ---------------------------------------------------
+* 1.0   vnsld   22/10/14 First release
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcsudma.h" + +/************************** Function Prototypes ******************************/ + + +/************************** Function Definitions *****************************/ + +/*****************************************************************************/ +/** +* +* This function initializes an CSU_DMA core. This function must be called +* prior to using an CSU_DMA core. Initialization of an CSU_DMA includes setting +* up the instance data and ensuring the hardware is in a quiescent state. +* +* @param InstancePtr is a pointer to the XCsuDma instance. +* @param CfgPtr is a reference to a structure containing information +* about a specific XCsuDma instance. +* @param EffectiveAddr is the device base address in the virtual memory +* address space. The caller is responsible for keeping the +* address mapping from EffectiveAddr to the device physical +* base address unchanged once this function is invoked. +* Unexpected errors may occur if the address mapping changes +* after this function is called. If address translation is not +* used, pass in the physical address instead. +* +* @return +* - XST_SUCCESS if initialization was successful. +* +* @note None. +* +******************************************************************************/ +s32 XCsuDma_CfgInitialize(XCsuDma *InstancePtr, XCsuDma_Config *CfgPtr, + u32 EffectiveAddr) +{ + + /* Verify arguments. */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(CfgPtr != NULL); + Xil_AssertNonvoid(EffectiveAddr != ((u32)0x0)); + + /* Setup the instance */ + (void)memcpy((void *)&(InstancePtr->Config), (const void *)CfgPtr, + sizeof(XCsuDma_Config)); + InstancePtr->Config.BaseAddress = EffectiveAddr; + + XCsuDma_Reset(); + + InstancePtr->IsReady = (u32)(XIL_COMPONENT_IS_READY); + + return (XST_SUCCESS); + +} + +/*****************************************************************************/ +/** +* +* This function sets the starting address and amount(size) of the data to be +* transfered from/to the memory through the AXI interface. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param Addr is a 64 bit variable which holds the starting address of +* data which needs to write into the memory(DST) (or read from +* the memory(SRC)). +* @param Size is a 32 bit variable which represents the number of 4 byte +* words needs to be transfered from starting address. +* @param EnDataLast is to trigger an end of message. It will enable or +* disable data_inp_last signal to stream interface when current +* command is completed. It is applicable only to source channel +* and neglected for destination channel. +* - 1 - Asserts data_inp_last signal. +* - 0 - data_inp_last will not be asserted. +* +* @return None. +* +* @note Data_inp_last signal is asserted simultaneously with the +* data_inp_valid signal associated with the final 32-bit word +* transfer. +* +******************************************************************************/ +void XCsuDma_Transfer(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + UINTPTR Addr, u32 Size, u8 EnDataLast) +{ + /* Verify arguments */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(((Addr) & (u64)(XCSUDMA_ADDR_LSB_MASK)) == (u64)0x00); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + Xil_AssertVoid(Size <= (u32)(XCSUDMA_SIZE_MAX)); + Xil_AssertVoid(InstancePtr->IsReady == (u32)(XIL_COMPONENT_IS_READY)); + + /* Flushing cache memory */ + if (Channel == (XCSUDMA_SRC_CHANNEL)) { + Xil_DCacheFlushRange(Addr, Size << (u32)(XCSUDMA_SIZE_SHIFT)); + } + /* Invalidating cache memory */ + else { + Xil_DCacheInvalidateRange(Addr, Size << + (u32)(XCSUDMA_SIZE_SHIFT)); + } + + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_ADDR_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + ((u32)(Addr) & (u32)(XCSUDMA_ADDR_MASK))); + + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_ADDR_MSB_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + (((u64)Addr >> (u32)(XCSUDMA_MSB_ADDR_SHIFT)) & + (u32)(XCSUDMA_MSB_ADDR_MASK))); + + if (EnDataLast == (u8)(XCSUDMA_LAST_WORD_MASK)) { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_SIZE_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + ((Size << (u32)(XCSUDMA_SIZE_SHIFT)) | + (u32)(XCSUDMA_LAST_WORD_MASK))); + } + else { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_SIZE_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + (Size << (u32)(XCSUDMA_SIZE_SHIFT))); + } +} + +/*****************************************************************************/ +/** +* +* This function returns the current address location of the memory, from where +* it has to read the data(SRC) or the location where it has to write the data +* (DST) based on the channel selection. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return Address is a 64 bit variable which holds the current address. +* - From this location data has to be read(SRC) +* - At this location data has to be written(DST) +* +* @note None. +* +******************************************************************************/ +u64 XCsuDma_GetAddr(XCsuDma *InstancePtr, XCsuDma_Channel Channel) +{ + u64 FullAddr; + + /* Verify arguments */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + + FullAddr = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_ADDR_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))); + + FullAddr |= (u64)((u64)XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_ADDR_MSB_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))) << + (u64)(XCSUDMA_MSB_ADDR_SHIFT)); + + return FullAddr; +} + +/*****************************************************************************/ +/** +* +* This function returns the size of the data yet to be transfered from memory +* to CSU_DMA or CSU_DMA to memory based on the channel selection. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return Size is amount of data yet to be transfered. +* +* @note None. +* +******************************************************************************/ +u32 XCsuDma_GetSize(XCsuDma *InstancePtr, XCsuDma_Channel Channel) +{ + u32 Size; + + /* Verify arguments. */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + + Size = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_SIZE_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))) >> + (u32)(XCSUDMA_SIZE_SHIFT); + + return Size; +} + +/*****************************************************************************/ +/** +* +* This function pause the Channel data tranfer to/from memory or to/from stream +* based on pause type. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param Type is type of the pause to be enabled. +* - XCSUDMA_PAUSE_MEMORY(0) - Pause memory +* - SRC Stops issuing of new read commands to memory. +* - DST Stops issuing of new write commands to memory. +* - XCSUDMA_PAUSE_STREAM(1) - Pause stream +* - SRC Stops transfer of data from FIFO to Stream. +* - DST Stops transfer of data from stream to FIFO. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCsuDma_Pause(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_PauseType Type) +{ + /* Verify arguments. */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid((Type == (XCSUDMA_PAUSE_MEMORY)) || + (Type == (XCSUDMA_PAUSE_STREAM))); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + Xil_AssertVoid(InstancePtr->IsReady == (u32)(XIL_COMPONENT_IS_READY)); + + /* Pause Memory Read/Write/Stream operations */ + if (Type == (XCSUDMA_PAUSE_MEMORY)) { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + (XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))) | + (u32)(XCSUDMA_CTRL_PAUSE_MEM_MASK))); + } + if (Type == (XCSUDMA_PAUSE_STREAM)) { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + (XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + (Channel * (u32)XCSUDMA_OFFSET_DIFF))) | + (u32)(XCSUDMA_CTRL_PAUSE_STRM_MASK))); + } +} + +/*****************************************************************************/ +/** +* +* This functions checks whether Channel's memory or stream is paused or not +* based on the given pause type. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param Type is type of the pause which needs to be checked. +* - XCSUDMA_PAUSE_MEMORY(0) - Pause memory +* - SRC Stops issuing of new read commands to memory. +* - DST Stops issuing of new write commands to memory. +* - XCSUDMA_PAUSE_STREAM(1) - Pause stream +* - SRC Stops transfer of data from FIFO to Stream. +* - DST Stops transfer of data from stream to FIFO. +* +* @return Returns the pause status. +* - TRUE if it is in paused state. +* - FALSE if it is not in pause state. +* +* @note None. +* +******************************************************************************/ +s32 XCsuDma_IsPaused(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_PauseType Type) +{ + + u32 Data; + s32 PauseState; + + /* Verify arguments. */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + Xil_AssertNonvoid((Type == (XCSUDMA_PAUSE_MEMORY)) || + (Type == (XCSUDMA_PAUSE_STREAM))); + + Data = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))); + + /* To know Pause condition of Memory Read/Write/Stream operations */ + if (Type == (XCSUDMA_PAUSE_MEMORY)) { + if ((Data & (u32)(XCSUDMA_CTRL_PAUSE_MEM_MASK)) == + (u32)0x00) { + PauseState = (s32)(FALSE); + } + else { + PauseState = (s32)(TRUE); + } + } + else { + if ((Data & (u32)(XCSUDMA_CTRL_PAUSE_STRM_MASK)) == + (u32)0x00) { + PauseState = (s32)(FALSE); + } + else { + PauseState = (s32)(TRUE); + } + } + + return (s32)PauseState; + +} + +/*****************************************************************************/ +/** +* +* This function resumes the channel if it is in paused state and continues +* where it has left or no effect if it is not in paused state, based on the +* type of pause. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param Type is type of the pause to be Resume if it is in pause +* state. +* - XCSUDMA_PAUSE_MEMORY(0) - Pause memory +* - SRC Stops issuing of new read commands to memory. +* - DST Stops issuing of new write commands to memory. +* - XCSUDMA_PAUSE_STREAM(1) - Pause stream +* - SRC Stops transfer of data from FIFO to Stream. +* - DST Stops transfer of data from stream to FIFO. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCsuDma_Resume(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_PauseType Type) +{ + u32 Data; + /* Verify arguments. */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid((Type == (XCSUDMA_PAUSE_MEMORY)) || + (Type == (XCSUDMA_PAUSE_STREAM))); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + Xil_AssertVoid(InstancePtr->IsReady == (u32)(XIL_COMPONENT_IS_READY)); + + Data = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))); + + if (Type == (XCSUDMA_PAUSE_MEMORY)) { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + (Data & + (~(XCSUDMA_CTRL_PAUSE_MEM_MASK)))); + } + if (Type == (XCSUDMA_PAUSE_STREAM)) { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + (((u32)Channel) * (u32)(XCSUDMA_OFFSET_DIFF))), + ( Data & + (~(XCSUDMA_CTRL_PAUSE_STRM_MASK)))); + } +} + +/*****************************************************************************/ +/** +* +* This function returns the sum of all the data read from AXI memory. It is +* valid only one we use CSU_DMA source channel. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* +* @return Returns the sum of all the data read from memory. +* +* @note Before start of the transfer need to clear this register to get +* correct sum otherwise it adds to previous value which results +* to wrong output. +* Valid only for source channel +* +******************************************************************************/ +u32 XCsuDma_GetCheckSum(XCsuDma *InstancePtr) +{ + u32 ChkSum; + + /* Verify arguments. */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(InstancePtr->IsReady == + (u32)(XIL_COMPONENT_IS_READY)); + + ChkSum = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_CRC_OFFSET)); + + return ChkSum; + +} +/*****************************************************************************/ +/** +* +* This function clears the check sum of the data read from AXI memory. It is +* valid only for CSU_DMA source channel. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* +* @return Returns the sum of all the data read from memory. +* +* @note Before start of the transfer need to clear this register to get +* correct sum otherwise it adds to previous value which results +* to wrong output. +* +******************************************************************************/ +void XCsuDma_ClearCheckSum(XCsuDma *InstancePtr) +{ + + /* Verify arguments. */ + Xil_AssertVoid(InstancePtr != NULL); + + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_CRC_OFFSET), (u32)(XCSUDMA_CRC_RESET_MASK)); +} + +/*****************************************************************************/ +/** +* This function cofigures all the values of CSU_DMA's Channels with the values +* of updated XCsuDma_Configure structure. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param ConfigurValues is a pointer to the structure XCsuDma_Configure +* whose values are used to configure CSU_DMA core. +* - SssFifoThesh When the DST FIFO level >= this value, +* the SSS interface signal, "data_out_fifo_level_hit" will be +* asserted. This mechanism can be used by the SSS to flow +* control data that is being looped back from the SRC DMA. +* - Range is (0x10 to 0x7A) threshold is 17 to 123 +* entries. +* - It is valid only for DST CSU_DMA IP. +* - ApbErr When accessed to invalid APB the resulting +* pslerr will be +* - 0 - 1'b0 +* - 1 - 1'b1 +* - EndianType Type of endianness +* - 0 doesn't change order +* - 1 will flip the order. +* - AxiBurstType....Type of the burst +* - 0 will issue INCR type burst +* - 1 will issue FIXED type burst +* - TimeoutValue Time out value for timers +* - 0x000 to 0xFFE are valid inputs +* - 0xFFF clears both timers +* - FifoThresh......Programmed watermark value +* - Range is 0x00 to 0x80 (0 to 128 entries). +* - Acache Sets the AXI CACHE bits on the AXI Write/Read +* channel. +* - Cacheable ARCACHE[1] for SRC Channel and AWCACHE[1] +* for DST channel are always 1, we need to configure +* remaining 3 signal support +* (Bufferable, Read allocate and Write allocate). +* Valid inputs are: +* - 0x000 - Cacheable, but do not allocate +* - 0x001 - Cacheable and bufferable, but do not allocate +* - 0x010 - Cacheable write-through, allocate on reads +* only +* - 0x011 - Cacheable write-back, allocate on reads only +* - 0x100 - Cacheable write-through, allocate on writes +* only +* - 0x101 - Cacheable write-back, allocate on writes only +* - 0x110 - Cacheable write-through, allocate on both +* reads and writes +* - 0x111 - Cacheable write-back, allocate on both reads +* and writes +* - RouteBit To select route +* - 0 : Command will be routed normally +* - 1 : Command will be routed to APU's cache controller +* - TimeoutEn To enable or disable time out counters +* - 0 : The 2 Timeout counters are disabled +* - 1 : The 2 Timeout counters are enabled +* - TimeoutPre Set the prescaler value for the timeout in +* clk (~2.5ns) cycles +* - Range is 0x000(Prescaler enables timer every cycles) +* to 0xFFF(Prescaler enables timer every 4096 cycles) +* - MaxOutCmds Controls the maximumum number of outstanding +* AXI read commands issued. +* - Range is 0x0(Up to 1 Outstanding Read command +* allowed) to 0x8 (Up to 9 Outstanding Read +* command allowed) +* +* @return None. +* +* @note To use timers timeout value Timeout enable field should be +* enabled. +* +******************************************************************************/ +void XCsuDma_SetConfig(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_Configure *ConfigurValues) +{ + u32 Data; + + /* Verify arguments. */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == (u32)(XIL_COMPONENT_IS_READY)); + Xil_AssertVoid(ConfigurValues != NULL); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + Xil_AssertVoid(XCsuDma_IsBusy(InstancePtr, Channel) != (s32)(TRUE)); + + Data = (((ConfigurValues->EndianType << + (u32)(XCSUDMA_CTRL_ENDIAN_SHIFT)) & + (u32)(XCSUDMA_CTRL_ENDIAN_MASK)) | + ((ConfigurValues->ApbErr << + (u32)(XCSUDMA_CTRL_APB_ERR_SHIFT)) & + (u32)(XCSUDMA_CTRL_APB_ERR_MASK)) | + ((ConfigurValues->AxiBurstType << + (u32)(XCSUDMA_CTRL_BURST_SHIFT)) & + (u32)(XCSUDMA_CTRL_BURST_MASK)) | + ((ConfigurValues->TimeoutValue << + (u32)(XCSUDMA_CTRL_TIMEOUT_SHIFT)) & + (u32)(XCSUDMA_CTRL_TIMEOUT_MASK)) | + ((ConfigurValues->FifoThresh << + (u32)(XCSUDMA_CTRL_FIFO_THRESH_SHIFT)) & + (u32)(XCSUDMA_CTRL_FIFO_THRESH_MASK))); + if(Channel == XCSUDMA_DST_CHANNEL) { + Data = Data | (u32)((ConfigurValues->SssFifoThesh << + (u32)(XCSUDMA_CTRL_SSS_FIFOTHRESH_SHIFT)) & + (u32)(XCSUDMA_CTRL_SSS_FIFOTHRESH_MASK)); + } + + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), Data); + + Data = (XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL2_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))) & + (u32)(XCSUDMA_CTRL2_RESERVED_MASK)); + Data |= (((ConfigurValues->Acache << + (u32)(XCSUDMA_CTRL2_ACACHE_SHIFT)) & + (u32)(XCSUDMA_CTRL2_ACACHE_MASK)) | + ((ConfigurValues->RouteBit << + (u32)(XCSUDMA_CTRL2_ROUTE_SHIFT)) & + (u32)(XCSUDMA_CTRL2_ROUTE_MASK)) | + ((ConfigurValues->TimeoutEn << + (u32)(XCSUDMA_CTRL2_TIMEOUT_EN_SHIFT)) & + (u32)(XCSUDMA_CTRL2_TIMEOUT_EN_MASK)) | + ((ConfigurValues->TimeoutPre << + (u32)(XCSUDMA_CTRL2_TIMEOUT_PRE_SHIFT)) & + (u32)(XCSUDMA_CTRL2_TIMEOUT_PRE_MASK)) | + ((ConfigurValues->MaxOutCmds) & + (u32)(XCSUDMA_CTRL2_MAXCMDS_MASK))); + + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL2_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), Data); +} + +/*****************************************************************************/ +/** +* +* This function updates XCsuDma_Configure structure members with the cofigured +* values of CSU_DMA's Channel. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param ConfigurValues is a pointer to the structure XCsuDma_Configure +* whose members are updated with configurations of CSU_DMA core. +* - SssFifoThesh When the DST FIFO level >= this value, +* the SSS interface signal, "data_out_fifo_level_hit" will be +* asserted. This mechanism can be used by the SSS to flow +* control data that is being looped back from the SRC DMA. +* - Range is (0x10 to 0x7A) threshold is 17 to 123 +* entries. +* - It is valid only for DST CSU_DMA IP. +* - ApbErr When accessed to invalid APB the resulting +* pslerr will be +* - 0 - 1'b0 +* - 1 - 1'b1 +* - EndianType Type of endianness +* - 0 doesn't change order +* - 1 will flip the order. +* - AxiBurstType....Type of the burst +* - 0 will issue INCR type burst +* - 1 will issue FIXED type burst +* - TimeoutValue Time out value for timers +* - 0x000 to 0xFFE are valid inputs +* - 0xFFF clears both timers +* - FifoThresh......Programmed watermark value +* - Range is 0x00 to 0x80 (0 to 128 entries). +* - Acache Sets the AXI CACHE bits on the AXI Write/Read +* channel. +* - Cacheable ARCACHE[1] for SRC Channel and AWCACHE[1] +* for DST channel are always 1, we need to configure +* remaining 3 signal support +* (Bufferable, Read allocate and Write allocate). +* Valid inputs are: +* - 0x000 - Cacheable, but do not allocate +* - 0x001 - Cacheable and bufferable, but do not allocate +* - 0x010 - Cacheable write-through, allocate on reads +* only +* - 0x011 - Cacheable write-back, allocate on reads only +* - 0x100 - Cacheable write-through, allocate on writes +* only +* - 0x101 - Cacheable write-back, allocate on writes only +* - 0x110 - Cacheable write-through, allocate on both +* reads and writes +* - 0x111 - Cacheable write-back, allocate on both reads +* and writes +* - RouteBit To select route +* - 0 : Command will be routed based normally +* - 1 : Command will be routed to APU's cache controller +* - TimeoutEn To enable or disable time out counters +* - 0 : The 2 Timeout counters are disabled +* - 1 : The 2 Timeout counters are enabled +* - TimeoutPre Set the prescaler value for the timeout in +* clk (~2.5ns) cycles +* - Range is 0x000(Prescaler enables timer every cycles) +* to 0xFFF(Prescaler enables timer every 4096 cycles) +* - MaxOutCmds Controls the maximumum number of outstanding +* AXI read commands issued. +* - Range is 0x0(Up to 1 Outstanding Read command +* allowed) to 0x8 (Up to 9 Outstanding Read command +* allowed) +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCsuDma_GetConfig(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_Configure *ConfigurValues) +{ + u32 Data; + + /* Verify arguments. */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(ConfigurValues != NULL); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + + Data = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))); + + if (Channel == (XCSUDMA_DST_CHANNEL)) { + ConfigurValues->SssFifoThesh = + (u8)((Data & + (u32)(XCSUDMA_CTRL_SSS_FIFOTHRESH_MASK)) >> + (u32)(XCSUDMA_CTRL_SSS_FIFOTHRESH_SHIFT)); + } + ConfigurValues->ApbErr = + (u8)((Data & (u32)(XCSUDMA_CTRL_APB_ERR_MASK)) >> + (u32)(XCSUDMA_CTRL_APB_ERR_SHIFT)); + ConfigurValues->EndianType = + (u8)((Data & (u32)(XCSUDMA_CTRL_ENDIAN_MASK)) >> + (u32)(XCSUDMA_CTRL_ENDIAN_SHIFT)); + ConfigurValues->AxiBurstType = + (u8)((Data & (u32)(XCSUDMA_CTRL_BURST_MASK)) >> + (u32)(XCSUDMA_CTRL_BURST_SHIFT)); + ConfigurValues->TimeoutValue = + ((Data & (u32)(XCSUDMA_CTRL_TIMEOUT_MASK)) >> + (u32)(XCSUDMA_CTRL_TIMEOUT_SHIFT)); + ConfigurValues->FifoThresh = + (u8)((Data & (u32)(XCSUDMA_CTRL_FIFO_THRESH_MASK)) >> + (u32)(XCSUDMA_CTRL_FIFO_THRESH_SHIFT)); + + Data = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_CTRL2_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF)))); + + ConfigurValues->Acache = + (u8)((Data & (u32)(XCSUDMA_CTRL2_ACACHE_MASK)) >> + (u32)(XCSUDMA_CTRL2_ACACHE_SHIFT)); + ConfigurValues->RouteBit = + (u8)((Data & (u32)(XCSUDMA_CTRL2_ROUTE_MASK)) >> + (u32)(XCSUDMA_CTRL2_ROUTE_SHIFT)); + ConfigurValues->TimeoutEn = + (u8)((Data & (u32)(XCSUDMA_CTRL2_TIMEOUT_EN_MASK)) >> + (u32)(XCSUDMA_CTRL2_TIMEOUT_EN_SHIFT)); + ConfigurValues->TimeoutPre = + (u16)((Data & (u32)(XCSUDMA_CTRL2_TIMEOUT_PRE_MASK)) >> + (u32)(XCSUDMA_CTRL2_TIMEOUT_PRE_SHIFT)); + ConfigurValues->MaxOutCmds = + (u8)((Data & (u32)(XCSUDMA_CTRL2_MAXCMDS_MASK))); + +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma.h new file mode 100644 index 000000000..fe63530a5 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma.h @@ -0,0 +1,418 @@ +/****************************************************************************** +* +* Copyright (C) 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* The CSU_DMA is present inside CSU (Configuration Security Unit) module which +* is located within the Low-Power Subsystem (LPS) internal to the PS. +* CSU_DMA allows the CSU to move data efficiently between the memory (32 bit +* AXI interface) and the CSU stream peripherals (SHA, AES and PCAP) via Secure +* Stream Switch (SSS). +* +* The CSU_DMA is a 2 channel simple DMA, allowing separate control of the SRC +* (read) channel and DST (write) channel. The DMA is effectively able to +* transfer data: +* - From PS-side to the SSS-side (SRC DMA only) +* - From SSS-side to the PS-side (DST DMA only) +* - Simultaneous PS-side to SSS_side and SSS-side to the PS-side +* +* Initialization & Configuration +* +* The device driver enables higher layer software (e.g., an application) to +* communicate to the CSU_DMA core. +* +* XCsuDma_CfgInitialize() API is used to initialize the CSU_DMA core. +* The user needs to first call the XCsuDma_LookupConfig() API which returns +* the Configuration structure pointer which is passed as a parameter to the +* XCsuDma_CfgInitialize() API. +* +* Interrupts +* This driver will not support handling of interrupts user should write handler +* to handle the interrupts. +* +* Virtual Memory +* +* This driver supports Virtual Memory. The RTOS is responsible for calculating +* the correct device base address in Virtual Memory space. +* +* Threads +* +* This driver is not thread safe. Any needs for threads or thread mutual +* exclusion must be satisfied by the layer above this driver. +* +* Asserts +* +* Asserts are used within all Xilinx drivers to enforce constraints on argument +* values. Asserts can be turned off on a system-wide basis by defining, at +* compile time, the NDEBUG identifier. By default, asserts are turned on and it +* is recommended that users leave asserts on during development. +* +* Building the driver +* +* The XCsuDma driver is composed of several source files. This allows the user +* to build and link only those parts of the driver that are necessary. +* +* @file xcsudma.h +* @addtogroup csudma_v1_0 +* @{ +* @details +* +* This header file contains identifiers and register-level driver functions (or +* macros), range macros, structure typedefs that can be used to access the +* Xilinx CSU_DMA core instance. +* +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- -----------------------------------------------------
+* 1.0   vnsld   22/10/14 First release
+*
+* +******************************************************************************/ + +#ifndef XCSUDMA_H_ +#define XCSUDMA_H_ /**< Prevent circular inclusions + * by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files *********************************/ + +#include "xcsudma_hw.h" +#include "xil_types.h" +#include "xil_assert.h" +#include "xstatus.h" +#include "xil_cache.h" + +/************************** Constant Definitions *****************************/ + +/** @name CSU_DMA Channels + * @{ + */ +typedef enum { + XCSUDMA_SRC_CHANNEL = 0U, /**< Source Channel of CSU_DMA */ + XCSUDMA_DST_CHANNEL /**< Destination Channel of CSU_DMA */ +}XCsuDma_Channel; +/*@}*/ + +/** @name CSU_DMA pause types + * @{ + */ +typedef enum { + XCSUDMA_PAUSE_MEMORY, /**< Pauses memory data transfer + * to/from CSU_DMA */ + XCSUDMA_PAUSE_STREAM, /**< Pauses stream data transfer + * to/from CSU_DMA */ +}XCsuDma_PauseType; + +/*@}*/ + + +/** @name Ranges of Size + * @{ + */ +#define XCSUDMA_SIZE_MAX 0x07FFFFFF /**< Maximum allowed no of words */ + +/*@}*/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/** +* +* This function resets the CSU_DMA core. +* +* @param None. +* +* @return None. +* +* @note None. +* C-style signature: +* void XCsuDma_Reset() +* +******************************************************************************/ +#define XCsuDma_Reset() \ + Xil_Out32(((u32)(XCSU_BASEADDRESS) + (u32)(XCSU_DMA_RESET_OFFSET)), \ + (u32)(XCSUDMA_RESET_SET_MASK)); \ + Xil_Out32(((u32)(XCSU_BASEADDRESS) + (u32)(XCSU_DMA_RESET_OFFSET)), \ + (u32)(XCSUDMA_RESET_UNSET_MASK)); + +/*****************************************************************************/ +/** +* This function will be in busy while loop until the data transfer is +* completed. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return None. +* +* @note This function should be called after XCsuDma_Transfer in polled +* mode to wait until the data gets transfered completely. +* C-style signature: +* void XCsuDma_WaitForDone(XCsuDma *InstancePtr, +* XCsuDma_Channel Channel) +* +******************************************************************************/ +#define XCsuDma_WaitForDone(InstancePtr,Channel) \ + while((XCsuDma_ReadReg(((InstancePtr)->Config.BaseAddress), \ + ((u32)(XCSUDMA_I_STS_OFFSET) + \ + ((u32)(Channel) * (u32)(XCSUDMA_OFFSET_DIFF)))) & \ + (u32)(XCSUDMA_IXR_DONE_MASK)) != (XCSUDMA_IXR_DONE_MASK)) + +/*****************************************************************************/ +/** +* +* This function returns the number of completed SRC/DST DMA transfers that +* have not been acknowledged by software based on the channel selection. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return Count is number of completed DMA transfers but not acknowledged +* (Range is 0 to 7). +* - 000 - All finished transfers have been acknowledged. +* - Count - Count number of finished transfers are still +* outstanding. +* +* @note None. +* C-style signature: +* u8 XCsuDma_GetDoneCount(XCsuDma *InstancePtr, +* XCsuDma_Channel Channel) +* +******************************************************************************/ +#define XCsuDma_GetDoneCount(InstancePtr, Channel) \ + ((XCsuDma_ReadReg(((InstancePtr)->Config.BaseAddress), \ + ((u32)(XCSUDMA_STS_OFFSET) + \ + ((u32)(Channel) * (u32)(XCSUDMA_OFFSET_DIFF)))) & \ + (u32)(XCSUDMA_STS_DONE_CNT_MASK)) >> \ + (u32)(XCSUDMA_STS_DONE_CNT_SHIFT)) + +/*****************************************************************************/ +/** +* +* This function returns the current SRC/DST FIFO level in 32 bit words of the +* selected channel +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return FIFO level. (Range is 0 to 128) +* - 0 Indicates empty +* - Any number 1 to 128 indicates the number of entries in FIFO. +* +* @note None. +* C-style signature: +* u8 XCsuDma_GetFIFOLevel(XCsuDma *InstancePtr, +* XCsuDma_Channel Channel) +* +******************************************************************************/ +#define XCsuDma_GetFIFOLevel(InstancePtr, Channel) \ + ((XCsuDma_ReadReg(((InstancePtr)->Config.BaseAddress), \ + ((u32)(XCSUDMA_STS_OFFSET) + \ + ((u32)(Channel) * (u32)(XCSUDMA_OFFSET_DIFF)))) & \ + (u32)(XCSUDMA_STS_FIFO_LEVEL_MASK)) >> \ + (u32)(XCSUDMA_STS_FIFO_LEVEL_SHIFT)) + +/*****************************************************************************/ +/** +* +* This function returns the current number of read(src)/write(dst) outstanding +* commands based on the type of channel selected. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return Count of outstanding commands. (Range is 0 to 9). +* +* @note None. +* C-style signature: +* u8 XCsuDma_GetWROutstandCount(XCsuDma *InstancePtr, +* XCsuDma_Channel Channel) +* +******************************************************************************/ +#define XCsuDma_GetWROutstandCount(InstancePtr, Channel) \ + ((XCsuDma_ReadReg(((InstancePtr)->Config.BaseAddress), \ + ((u32)(XCSUDMA_STS_OFFSET) + \ + ((u32)(Channel) * (u32)(XCSUDMA_OFFSET_DIFF)))) & \ + (u32)(XCUSDMA_STS_OUTSTDG_MASK)) >> \ + (u32)(XCUSDMA_STS_OUTSTDG_SHIFT)) + +/*****************************************************************************/ +/** +* +* This function returns the status of Channel either it is busy or not. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return Returns the current status of the core. +* - TRUE represents core is currently busy. +* - FALSE represents core is not involved in any transfers. +* +* @note None. +* C-style signature: +* s32 XCsuDma_IsBusy(XCsuDma *InstancePtr, XCsuDma_Channel Channel) +* +******************************************************************************/ + +#define XCsuDma_IsBusy(InstancePtr, Channel) \ + ((XCsuDma_ReadReg(((InstancePtr)->Config.BaseAddress), \ + ((u32)(XCSUDMA_STS_OFFSET) + \ + ((u32)(Channel) * (u32)(XCSUDMA_OFFSET_DIFF)))) & \ + (u32)(XCSUDMA_STS_BUSY_MASK)) == (XCSUDMA_STS_BUSY_MASK)) ? \ + (TRUE) : (FALSE) + + +/**************************** Type Definitions *******************************/ + +/** +* This typedef contains configuration information for a CSU_DMA core. +* Each CSU_DMA core should have a configuration structure associated. +*/ +typedef struct { + u16 DeviceId; /**< DeviceId is the unique ID of the + * device */ + u32 BaseAddress; /**< BaseAddress is the physical base address + * of the device's registers */ +} XCsuDma_Config; + + +/******************************************************************************/ +/** +* +* The XCsuDma driver instance data structure. A pointer to an instance data +* structure is passed around by functions to refer to a specific driver +* instance. +*/ +typedef struct { + XCsuDma_Config Config; /**< Hardware configuration */ + u32 IsReady; /**< Device and the driver instance + * are initialized */ +}XCsuDma; + + +/******************************************************************************/ +/** +* This typedef contains all the configuration feilds which needs to be set +* before the start of the data transfer. All these feilds of CSU_DMA can be +* configured by using XCsuDma_SetConfig API. +*/ +typedef struct { + u8 SssFifoThesh; /**< SSS FIFO threshold value */ + u8 ApbErr; /**< ABP invalid access error */ + u8 EndianType; /**< Type of endianess */ + u8 AxiBurstType; /**< Type of AXI bus */ + u32 TimeoutValue; /**< Time out value */ + u8 FifoThresh; /**< FIFO threshold value */ + u8 Acache; /**< AXI CACHE selection */ + u8 RouteBit; /**< Selection of Route */ + u8 TimeoutEn; /**< Enable of time out counters */ + u16 TimeoutPre; /**< Pre scaler value */ + u8 MaxOutCmds; /**< Maximum number of outstanding + * commands */ +}XCsuDma_Configure; + +/*****************************************************************************/ + + +/************************** Function Prototypes ******************************/ + +XCsuDma_Config *XCsuDma_LookupConfig(u16 DeviceId); + +s32 XCsuDma_CfgInitialize(XCsuDma *InstancePtr, XCsuDma_Config *CfgPtr, + u32 EffectiveAddr); +void XCsuDma_Transfer(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + UINTPTR Addr, u32 Size, u8 EnDataLast); +void XCsuDma_LoopBackTransfer(XCsuDma *InstancePtr, u64 SrcAddr, u64 DstAddr, + u32 Size); +u64 XCsuDma_GetAddr(XCsuDma *InstancePtr, XCsuDma_Channel Channel); +u32 XCsuDma_GetSize(XCsuDma *InstancePtr, XCsuDma_Channel Channel); + +void XCsuDma_Pause(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_PauseType Type); +s32 XCsuDma_IsPaused(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_PauseType Type); +void XCsuDma_Resume(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_PauseType Type); + +u32 XCsuDma_GetCheckSum(XCsuDma *InstancePtr); +void XCsuDma_ClearCheckSum(XCsuDma *InstancePtr); + +void XCsuDma_SetConfig(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_Configure *ConfigurValues); +void XCsuDma_GetConfig(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + XCsuDma_Configure *ConfigurValues); +void XCsuDma_ClearDoneCount(XCsuDma *InstancePtr, XCsuDma_Channel Channel); + +void XCsuDma_SetSafetyCheck(XCsuDma *InstancePtr, u32 Value); +u32 XCsuDma_GetSafetyCheck(XCsuDma *InstancePtr); + +/* Interrupt related APIs */ +u32 XCsuDma_IntrGetStatus(XCsuDma *InstancePtr, XCsuDma_Channel Channel); +void XCsuDma_IntrClear(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + u32 Mask); +void XCsuDma_EnableIntr(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + u32 Mask); +void XCsuDma_DisableIntr(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + u32 Mask); +u32 XCsuDma_GetIntrMask(XCsuDma *InstancePtr, XCsuDma_Channel Channel); + +s32 XCsuDma_SelfTest(XCsuDma *InstancePtr); + +/******************************************************************************/ + +#ifdef __cplusplus +} + +#endif + +#endif /* End of protection macro */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_g.c new file mode 100644 index 000000000..b3fb65f5b --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_g.c @@ -0,0 +1,55 @@ + +/******************************************************************* +* +* CAUTION: This file is automatically generated by HSI. +* Version: +* DO NOT EDIT. +* +* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.* +*Permission is hereby granted, free of charge, to any person obtaining a copy +*of this software and associated documentation files (the Software), to deal +*in the Software without restriction, including without limitation the rights +*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +*copies of the Software, and to permit persons to whom the Software is +*furnished to do so, subject to the following conditions: +* +*The above copyright notice and this permission notice shall be included in +*all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +*(a) running on a Xilinx device, or +*(b) that interact with a Xilinx device through a bus or interconnect. +* +*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT +*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +* +*Except as contained in this notice, the name of the Xilinx shall not be used +*in advertising or otherwise to promote the sale, use or other dealings in +*this Software without prior written authorization from Xilinx. +* + +* +* Description: Driver configuration +* +*******************************************************************/ + +#include "xparameters.h" +#include "xcsudma.h" + +/* +* The configuration table for devices +*/ + +XCsuDma_Config XCsuDma_ConfigTable[] = +{ + { + XPAR_PSU_CSUDMA_DEVICE_ID, + XPAR_PSU_CSUDMA_BASEADDR + } +}; + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_hw.h new file mode 100644 index 000000000..6b2c2cdb8 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_hw.h @@ -0,0 +1,311 @@ +/****************************************************************************** +* +* Copyright (C) 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xcsudma_hw.h +* @addtogroup csudma_v1_0 +* @{ +* +* This header file contains identifiers and register-level driver functions (or +* macros) that can be used to access the Xilinx CSU_DMA core. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ------------------------------------------------------
+* 1.0   vnsld  22/10/14 First release
+*
+* +******************************************************************************/ + +#ifndef XCSUDMA_HW_H_ +#define XCSUDMA_HW_H_ /**< Prevent circular inclusions + * by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files *********************************/ + +#include "xil_io.h" + +/************************** Constant Definitions *****************************/ + +/** @name Registers offsets + * @{ + */ +#define XCSUDMA_ADDR_OFFSET 0x000 /**< Address Register Offset */ +#define XCSUDMA_SIZE_OFFSET 0x004 /**< Size Register Offset */ +#define XCSUDMA_STS_OFFSET 0x008 /**< Status Register Offset */ +#define XCSUDMA_CTRL_OFFSET 0x00C /**< Control Register Offset */ +#define XCSUDMA_CRC_OFFSET 0x010 /**< CheckSum Register Offset */ +#define XCSUDMA_I_STS_OFFSET 0x014 /**< Interrupt Status Register + * Offset */ +#define XCSUDMA_I_EN_OFFSET 0x018 /**< Interrupt Enable Register + * Offset */ +#define XCSUDMA_I_DIS_OFFSET 0x01C /**< Interrupt Disable Register + * Offset */ +#define XCSUDMA_I_MASK_OFFSET 0x020 /**< Interrupt Mask Register Offset */ +#define XCSUDMA_CTRL2_OFFSET 0x024 /**< Interrupt Control Register 2 + * Offset */ +#define XCSUDMA_ADDR_MSB_OFFSET 0x028 /**< Address's MSB Register Offset */ +#define XCSUDMA_SAFETY_CHK_OFFSET 0xFF8 /**< Safety Check Field Offset */ +#define XCSUDMA_FUTURE_ECO_OFFSET 0xFFC /**< Future potential ECO Offset */ +/*@}*/ + +/** @name CSU Base address and CSU_DMA reset offset + * @{ + */ +#define XCSU_BASEADDRESS 0xFFCA0000 + /**< CSU Base Address */ +#define XCSU_DMA_RESET_OFFSET 0x0000000CU /**< CSU_DMA Reset offset */ +/*@}*/ + +/** @name CSU_DMA Reset register bit masks + * @{ + */ +#define XCSUDMA_RESET_SET_MASK 0x00000001U /**< Reset set mask */ +#define XCSUDMA_RESET_UNSET_MASK 0x00000000U /**< Reset unset mask*/ +/*@}*/ + +/** @name Offset difference for Source and destination + * @{ + */ +#define XCSUDMA_OFFSET_DIFF 0x00000800U /**< Offset difference for + * source and + * destination channels */ +/*@}*/ + +/** @name Address register bit masks + * @{ + */ +#define XCSUDMA_ADDR_MASK 0xFFFFFFFCU /**< Address mask */ +#define XCSUDMA_ADDR_LSB_MASK 0x00000003U /**< Address alignment check + * mask */ +/*@}*/ + +/** @name Size register bit masks and shifts + * @{ + */ +#define XCSUDMA_SIZE_MASK 0x1FFFFFFCU /**< Mask for size */ +#define XCSUDMA_LAST_WORD_MASK 0x00000001U /**< Last word check bit mask*/ +#define XCSUDMA_SIZE_SHIFT 2U /**< Shift for size */ +/*@}*/ + +/** @name Status register bit masks and shifts + * @{ + */ +#define XCSUDMA_STS_DONE_CNT_MASK 0x0000E000U /**< Count done mask */ +#define XCSUDMA_STS_FIFO_LEVEL_MASK 0x00001FE0U /**< FIFO level mask */ +#define XCUSDMA_STS_OUTSTDG_MASK 0x0000001EU /**< No.of outstanding + * read/write + * commands mask */ +#define XCSUDMA_STS_BUSY_MASK 0x00000001U /**< Busy mask */ +#define XCSUDMA_STS_DONE_CNT_SHIFT 13U /**< Shift for Count + * done */ +#define XCSUDMA_STS_FIFO_LEVEL_SHIFT 5U /**< Shift for FIFO + * level */ +#define XCUSDMA_STS_OUTSTDG_SHIFT 1U /**< Shift for No.of + * outstanding + * read/write + * commands */ +/*@}*/ + +/** @name Control register bit masks and shifts + * @{ + */ +#define XCSUDMA_CTRL_SSS_FIFOTHRESH_MASK 0xFE000000U /**< SSS FIFO threshold + * value mask */ +#define XCSUDMA_CTRL_APB_ERR_MASK 0x01000000U /**< APB register + * access error + * mask */ +#define XCSUDMA_CTRL_ENDIAN_MASK 0x00800000U /**< Endianess mask */ +#define XCSUDMA_CTRL_BURST_MASK 0x00400000U /**< AXI burst type + * mask */ +#define XCSUDMA_CTRL_TIMEOUT_MASK 0x003FFC00U /**< Time out value + * mask */ +#define XCSUDMA_CTRL_FIFO_THRESH_MASK 0x000003FCU /**< FIFO threshold + * mask */ +#define XCSUDMA_CTRL_PAUSE_MEM_MASK 0x00000001U /**< Memory pause + * mask */ +#define XCSUDMA_CTRL_PAUSE_STRM_MASK 0x00000002U /**< Stream pause + * mask */ +#define XCSUDMA_CTRL_SSS_FIFOTHRESH_SHIFT 25U /**< SSS FIFO threshold + * shift */ +#define XCSUDMA_CTRL_APB_ERR_SHIFT 24U /**< APB error shift */ +#define XCSUDMA_CTRL_ENDIAN_SHIFT 23U /**< Endianess shift */ +#define XCSUDMA_CTRL_BURST_SHIFT 22U /**< AXI burst type + * shift */ +#define XCSUDMA_CTRL_TIMEOUT_SHIFT 10U /**< Time out value + * shift */ +#define XCSUDMA_CTRL_FIFO_THRESH_SHIFT 2U /**< FIFO thresh + * shift */ +/*@}*/ + +/** @name CheckSum register bit masks + * @{ + */ +#define XCSUDMA_CRC_RESET_MASK 0x00000000U /**< Mask to reset + * value of + * check sum */ +/*@}*/ + +/** @name Interrupt Enable/Disable/Mask/Status registers bit masks + * @{ + */ +#define XCSUDMA_IXR_FIFO_OVERFLOW_MASK 0x00000001U /**< FIFO overflow + * mask, it is valid + * only to Destination + * Channel */ +#define XCSUDMA_IXR_INVALID_APB_MASK 0x00000040U /**< Invalid APB access + * mask */ +#define XCSUDMA_IXR_FIFO_THRESHHIT_MASK 0x00000020U /**< FIFO threshold hit + * indicator mask */ +#define XCSUDMA_IXR_TIMEOUT_MEM_MASK 0x00000010U /**< Time out counter + * expired to access + * memory mask */ +#define XCSUDMA_IXR_TIMEOUT_STRM_MASK 0x00000008U /**< Time out counter + * expired to access + * stream mask */ +#define XCSUDMA_IXR_AXI_WRERR_MASK 0x00000004U /**< AXI Read/Write + * error mask */ +#define XCSUDMA_IXR_DONE_MASK 0x00000002U /**< Done mask */ +#define XCSUDMA_IXR_MEM_DONE_MASK 0x00000001U /**< Memory done + * mask, it is valid + * only for source + * channel*/ +#define XCSUDMA_IXR_SRC_MASK 0x0000007FU + /**< ((XCSUDMA_IXR_INVALID_APB_MASK)| + (XCSUDMA_IXR_FIFO_THRESHHIT_MASK) | + (XCSUDMA_IXR_TIMEOUT_MEM_MASK) | + (XCSUDMA_IXR_TIMEOUT_STRM_MASK) | + (XCSUDMA_IXR_AXI_WRERR_MASK) | + (XCSUDMA_IXR_DONE_MASK) | + (XCSUDMA_IXR_MEM_DONE_MASK)) */ + /**< All interrupt mask + * for source */ +#define XCSUDMA_IXR_DST_MASK 0x000000FEU + /**< ((XCSUDMA_IXR_FIFO_OVERFLOW_MASK) | + (XCSUDMA_IXR_INVALID_APB_MASK) | + (XCSUDMA_IXR_FIFO_THRESHHIT_MASK) | + (XCSUDMA_IXR_TIMEOUT_MEM_MASK) | + (XCSUDMA_IXR_TIMEOUT_STRM_MASK) | + (XCSUDMA_IXR_AXI_WRERR_MASK) | + (XCSUDMA_IXR_DONE_MASK)) */ + /**< All interrupt mask + * for destination */ +/*@}*/ + +/** @name Control register 2 bit masks and shifts + * @{ + */ +#define XCSUDMA_CTRL2_RESERVED_MASK 0x083F0000U /**< Reserved bits + * mask */ +#define XCSUDMA_CTRL2_ACACHE_MASK 0X07000000U /**< AXI CACHE mask */ +#define XCSUDMA_CTRL2_ROUTE_MASK 0x00800000U /**< Route mask */ +#define XCSUDMA_CTRL2_TIMEOUT_EN_MASK 0x00400000U /**< Time out counters + * enable mask */ +#define XCSUDMA_CTRL2_TIMEOUT_PRE_MASK 0x0000FFF0U /**< Time out pre + * mask */ +#define XCSUDMA_CTRL2_MAXCMDS_MASK 0x0000000FU /**< Maximum commands + * mask */ +#define XCSUDMA_CTRL2_RESET_MASK 0x0000FFF8U /**< Reset mask */ +#define XCSUDMA_CTRL2_ACACHE_SHIFT 24U /**< Shift for + * AXI R/W CACHE */ +#define XCSUDMA_CTRL2_ROUTE_SHIFT 23U /**< Shift for route */ +#define XCSUDMA_CTRL2_TIMEOUT_EN_SHIFT 22U /**< Shift for Timeout + * enable feild */ +#define XCSUDMA_CTRL2_TIMEOUT_PRE_SHIFT 4U /**< Shift for Timeout + * pre feild */ +/*@}*/ + +/** @name MSB Address register bit masks and shifts + * @{ + */ +#define XCSUDMA_MSB_ADDR_MASK 0x0001FFFFU /**< MSB bits of address + * mask */ +#define XCSUDMA_MSB_ADDR_SHIFT 32U /**< Shift for MSB bits of + * address */ +/*@}*/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +#define XCsuDma_In32 Xil_In32 /**< Input operation */ +#define XCsuDma_Out32 Xil_Out32 /**< Output operation */ + +/*****************************************************************************/ +/** +* +* This macro reads the given register. +* +* @param BaseAddress is the Xilinx base address of the CSU_DMA core. +* @param RegOffset is the register offset of the register. +* +* @return The 32-bit value of the register. +* +* @note C-style signature: +* u32 XCsuDma_ReadReg(u32 BaseAddress, u32 RegOffset) +* +******************************************************************************/ +#define XCsuDma_ReadReg(BaseAddress, RegOffset) \ + XCsuDma_In32((BaseAddress) + (u32)(RegOffset)) + +/*****************************************************************************/ +/** +* +* This macro writes the value into the given register. +* +* @param BaseAddress is the Xilinx base address of the CSU_DMA core. +* @param RegOffset is the register offset of the register. +* @param Data is the 32-bit value to write to the register. +* +* @return None. +* +* @note C-style signature: +* void XCsuDma_WriteReg(u32 BaseAddress, u32 RegOffset, u32 Data) +* +******************************************************************************/ +#define XCsuDma_WriteReg(BaseAddress, RegOffset, Data) \ + XCsuDma_Out32((BaseAddress) + (u32)(RegOffset), (u32)(Data)) + + +#ifdef __cplusplus +} + +#endif + + +#endif /* End of protection macro */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_intr.c new file mode 100644 index 000000000..9f37e4582 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_intr.c @@ -0,0 +1,274 @@ +/****************************************************************************** +* +* Copyright (C) 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ + +/*****************************************************************************/ +/** +* +* @file xcsudma_intr.c +* @addtogroup csudma_v1_0 +* @{ +* +* This file contains interrupt related functions of Xilinx CSU_DMA core. +* Please see xcsudma.h for more details of the driver. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ---------------------------------------------------
+* 1.0   vnsld  22/10/14  First release
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcsudma.h" + +/************************** Function Prototypes ******************************/ + + +/************************** Function Definitions *****************************/ + + +/*****************************************************************************/ +/** +* +* This function returns interrupt status read from Interrupt Status Register. +* Use the XCSUDMA_IXR_*_MASK constants defined in xcsudma_hw.h to interpret the +* returned value. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return The pending interrupts of the CSU_DMA. Use th following masks +* to interpret the returned value. +* XCSUDMA_IXR_SRC_MASK - For Source channel +* XCSUDMA_IXR_DST_MASK - For Destination channel +* +* @note None. +* +******************************************************************************/ +u32 XCsuDma_IntrGetStatus(XCsuDma *InstancePtr, XCsuDma_Channel Channel) +{ + u32 Data; + + /* Verify arguments */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + + Data = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_I_STS_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))); + + return Data; + +} + +/*****************************************************************************/ +/** +* +* This function clears interrupt(s). Every bit set in Interrupt Status +* Register indicates that a specific type of interrupt is occurring, and this +* function clears one or more interrupts by writing a bit mask to Interrupt +* Clear Register. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param Mask is the mask to clear. Bit positions of 1 will be cleared. +* Bit positions of 0 will not change the previous interrupt +* status. This mask is formed by OR'ing XCSUDMA_IXR_* bits +* defined in xcsudma_hw.h. +* +* @note None. +* +******************************************************************************/ +void XCsuDma_IntrClear(XCsuDma *InstancePtr, XCsuDma_Channel Channel, u32 Mask) +{ + + + /* Verify arguments */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + if (Channel == (XCSUDMA_SRC_CHANNEL)) { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_I_STS_OFFSET), + (Mask & (u32)(XCSUDMA_IXR_SRC_MASK))); + } + else { + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_I_STS_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), + (Mask & (u32)(XCSUDMA_IXR_DST_MASK))); + } +} + +/*****************************************************************************/ +/** +* +* This function enables the interrupt(s). Use the XCSUDMA_IXR_*_MASK constants +* defined in xcsudma_hw.h to create the bit-mask to enable interrupts. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param Mask contains interrupts to be enabled. +* - Bit positions of 1 will be enabled. +* This mask is formed by OR'ing XCSUDMA_IXR_*_MASK bits defined +* in xcsudma_hw.h. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCsuDma_EnableIntr(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + u32 Mask) +{ + u32 Data; + + /* Verify arguments */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + + if (Channel == (XCSUDMA_SRC_CHANNEL)) { + Data = Mask & (u32)(XCSUDMA_IXR_SRC_MASK); + } + else { + Data = Mask & (u32)(XCSUDMA_IXR_DST_MASK); + } + /* + * Write the mask to the IER Register + */ + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_I_EN_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), Data); + +} + +/*****************************************************************************/ +/** +* +* This function disables the interrupt(s). Use the XCSUDMA_IXR_*_MASK constants +* defined in xcsudma_hw.h to create the bit-mask to disable interrupts. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* @param Mask contains interrupts to be disabled. +* - Bit positions of 1 will be disabled. +* This mask is formed by OR'ing XCSUDMA_IXR_*_MASK bits defined +* in xcsudma_hw.h. +* +* @return None. +* +* @note None. +* +******************************************************************************/ +void XCsuDma_DisableIntr(XCsuDma *InstancePtr, XCsuDma_Channel Channel, + u32 Mask) +{ + u32 Data; + + /* Verify arguments */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + + if (Channel == XCSUDMA_SRC_CHANNEL) { + Data = (Mask) & (u32)(XCSUDMA_IXR_SRC_MASK); + } + else { + Data = (Mask) & (u32)(XCSUDMA_IXR_DST_MASK); + } + + /* + * Write the mask to the IDR Register + */ + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_I_DIS_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))), Data); + +} + +/*****************************************************************************/ +/** +* +* This function returns the interrupt mask to know which interrupts are +* enabled and which of them were disaled. +* +* @param InstancePtr is a pointer to XCsuDma instance to be worked on. +* @param Channel represents the type of channel either it is Source or +* Destination. +* Source channel - XCSUDMA_SRC_CHANNEL +* Destination Channel - XCSUDMA_DST_CHANNEL +* +* @return The current interrupt mask. The mask indicates which interrupts +* are enabled/disabled. +* 0 bit represents .....corresponding interrupt is enabled. +* 1 bit represents .....Corresponding interrupt is disabled. +* To interpret returned mask use +* XCSUDMA_IXR_SRC_MASK........For source channel +* XCSUDMA_IXR_DST_MASK........For destination channel +* +* @note None. +* +******************************************************************************/ +u32 XCsuDma_GetIntrMask(XCsuDma *InstancePtr, XCsuDma_Channel Channel) +{ + + /* Verify arguments */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid((Channel == (XCSUDMA_SRC_CHANNEL)) || + (Channel == (XCSUDMA_DST_CHANNEL))); + + /* + * Read the Interrupt Mask register + */ + return (XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + ((u32)(XCSUDMA_I_MASK_OFFSET) + + ((u32)Channel * (u32)(XCSUDMA_OFFSET_DIFF))))); +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_selftest.c new file mode 100644 index 000000000..f61910fd4 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_selftest.c @@ -0,0 +1,125 @@ +/****************************************************************************** +* +* Copyright (C) 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ + +/*****************************************************************************/ +/** +* +* @file xcsudma_selftest.c +* @addtogroup csudma_v1_0 +* @{ +* +* This file contains a diagnostic self-test function for the CSU_DMA driver. +* Refer to the header file xcsudma.h for more detailed information. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ---------------------------------------------------
+* 1.0   vnsld   22/10/14 First release
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcsudma.h" + +/************************** Constant Definitions ****************************/ + + +/**************************** Type Definitions ******************************/ + + +/***************** Macros (Inline Functions) Definitions ********************/ + + +/************************** Variable Definitions ****************************/ + + +/************************** Function Prototypes *****************************/ + + +/************************** Function Definitions *****************************/ + + +/*****************************************************************************/ +/** +* +* This function runs a self-test on the driver and hardware device. Performs +* reset of both source and destination channels and checks if reset is working +* properly or not. +* +* @param InstancePtr is a pointer to the XCsuDma instance. +* +* @return +* - XST_SUCCESS if the self-test passed. +* - XST_FAILURE otherwise. +* +* @note None. +* +******************************************************************************/ +s32 XCsuDma_SelfTest(XCsuDma *InstancePtr) +{ + u32 Data; + s32 Status; + + /* Verify arguments. */ + Xil_AssertNonvoid(InstancePtr != NULL); + + Data = XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_CTRL_OFFSET)); + + /* Changing Endianess of Source channel */ + + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_CTRL_OFFSET), + ((Data) | (u32)(XCSUDMA_CTRL_ENDIAN_MASK))); + + if ((XCsuDma_ReadReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_CTRL_OFFSET)) & + (u32)(XCSUDMA_CTRL_ENDIAN_MASK)) == + (XCSUDMA_CTRL_ENDIAN_MASK)) { + Status = (s32)(XST_SUCCESS); + } + else { + Status = (s32)(XST_FAILURE); + } + + /* Changes made are being reverted back */ + XCsuDma_WriteReg(InstancePtr->Config.BaseAddress, + (u32)(XCSUDMA_CTRL_OFFSET), Data); + + return Status; + +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_sinit.c new file mode 100644 index 000000000..10e5c14f6 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/csudma_v1_0/src/xcsudma_sinit.c @@ -0,0 +1,107 @@ +/****************************************************************************** +* +* Copyright (C) 2014 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ + +/*****************************************************************************/ +/** +* +* @file xcsudma_sinit.c +* @addtogroup csudma_v1_0 +* @{ +* +* This file contains static initialization methods for Xilinx CSU_DMA core. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ---------------------------------------------------
+* 1.0   vnsld   22/10/14 First release
+*
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xcsudma.h" +#include "xparameters.h" + +/************************** Constant Definitions *****************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + + +/**************************** Type Definitions *******************************/ + + +/************************** Function Prototypes ******************************/ + + +/************************** Variable Definitions *****************************/ + + +/************************** Function Definitions *****************************/ + +/*****************************************************************************/ +/** +* +* XCsuDma_LookupConfig returns a reference to an XCsuDma_Config structure +* based on the unique device id, DeviceId. The return value will refer +* to an entry in the device configuration table defined in the xcsudma_g.c +* file. +* +* @param DeviceId is the unique device ID of the device for the lookup +* operation. +* +* @return CfgPtr is a reference to a config record in the configuration +* table (in xcsudma_g.c) corresponding to DeviceId, or +* NULL if no match is found. +* +* @note None. +******************************************************************************/ +XCsuDma_Config *XCsuDma_LookupConfig(u16 DeviceId) +{ + extern XCsuDma_Config XCsuDma_ConfigTable[XPAR_XCSUDMA_NUM_INSTANCES]; + XCsuDma_Config *CfgPtr = NULL; + u32 Index; + + /* Checks all the instances */ + for (Index = (u32)0x0; Index < (u32)(XPAR_XCSUDMA_NUM_INSTANCES); + Index++) { + if (XCsuDma_ConfigTable[Index].DeviceId == DeviceId) { + CfgPtr = &XCsuDma_ConfigTable[Index]; + break; + } + } + + return (XCsuDma_Config *)CfgPtr; +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/Makefile new file mode 100644 index 000000000..7002e6223 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/Makefile @@ -0,0 +1,40 @@ +COMPILER= +ARCHIVER= +CP=cp +COMPILER_FLAGS= +EXTRA_COMPILER_FLAGS= +LIB=libxil.a + +CC_FLAGS = $(COMPILER_FLAGS) +ECC_FLAGS = $(EXTRA_COMPILER_FLAGS) + +RELEASEDIR=../../../lib +INCLUDEDIR=../../../include +INCLUDES=-I./. -I${INCLUDEDIR} + +OUTS = *.o + +LIBSOURCES:=*.c +INCLUDEFILES:=*.h + +OBJECTS = $(addsuffix .o, $(basename $(wildcard *.c))) + +libs: banner xemacps_libs clean + +%.o: %.c + ${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $< + +banner: + echo "Compiling emacps" + +xemacps_libs: ${OBJECTS} + $(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS} + +.PHONY: include +include: xemacps_includes + +xemacps_includes: + ${CP} ${INCLUDEFILES} ${INCLUDEDIR} + +clean: + rm -rf ${OBJECTS} diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps.c new file mode 100644 index 000000000..26df03c3d --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps.c @@ -0,0 +1,489 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemacps.c +* @addtogroup emacps_v3_1 +* @{ +* +* The XEmacPs driver. Functions in this file are the minimum required functions +* for this driver. See xemacps.h for a detailed description of the driver. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release
+* 2.1  srt  07/15/14 Add support for Zynq Ultrascale Mp GEM specification and
+*		      64-bit changes.
+* 3.00 kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.0  hk   02/20/15 Added support for jumbo frames. Increase AHB burst.
+*                    Disable extended mode. Perform all 64 bit changes under
+*                    check for arch64.
+* 3.1  hk   08/10/15 Update upper 32 bit tx and rx queue ptr registers
+*
+*
+******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xemacps.h" + +/************************** Constant Definitions *****************************/ + + +/**************************** Type Definitions *******************************/ + + +/***************** Macros (Inline Functions) Definitions *********************/ + + +/************************** Function Prototypes ******************************/ + +void XEmacPs_StubHandler(void); /* Default handler routine */ + +/************************** Variable Definitions *****************************/ + + +/*****************************************************************************/ +/** +* Initialize a specific XEmacPs instance/driver. The initialization entails: +* - Initialize fields of the XEmacPs instance structure +* - Reset hardware and apply default options +* - Configure the DMA channels +* +* The PHY is setup independently from the device. Use the MII or whatever other +* interface may be present for setup. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* @param CfgPtr is the device configuration structure containing required +* hardware build data. +* @param EffectiveAddress is the base address of the device. If address +* translation is not utilized, this parameter can be passed in using +* CfgPtr->Config.BaseAddress to specify the physical base address. +* +* @return +* - XST_SUCCESS if initialization was successful +* +******************************************************************************/ +LONG XEmacPs_CfgInitialize(XEmacPs *InstancePtr, XEmacPs_Config * CfgPtr, + UINTPTR EffectiveAddress) +{ + /* Verify arguments */ + Xil_AssertNonvoid(InstancePtr != NULL); + Xil_AssertNonvoid(CfgPtr != NULL); + + /* Set device base address and ID */ + InstancePtr->Config.DeviceId = CfgPtr->DeviceId; + InstancePtr->Config.BaseAddress = EffectiveAddress; + + /* Set callbacks to an initial stub routine */ + InstancePtr->SendHandler = ((XEmacPs_Handler)((void*)XEmacPs_StubHandler)); + InstancePtr->RecvHandler = ((XEmacPs_Handler)(void*)XEmacPs_StubHandler); + InstancePtr->ErrorHandler = ((XEmacPs_ErrHandler)(void*)XEmacPs_StubHandler); + + /* Reset the hardware and set default options */ + InstancePtr->IsReady = XIL_COMPONENT_IS_READY; + XEmacPs_Reset(InstancePtr); + + return (LONG)(XST_SUCCESS); +} + + +/*****************************************************************************/ +/** +* Start the Ethernet controller as follows: +* - Enable transmitter if XTE_TRANSMIT_ENABLE_OPTION is set +* - Enable receiver if XTE_RECEIVER_ENABLE_OPTION is set +* - Start the SG DMA send and receive channels and enable the device +* interrupt +* +* @param InstancePtr is a pointer to the instance to be worked on. +* +* @return N/A +* +* @note +* Hardware is configured with scatter-gather DMA, the driver expects to start +* the scatter-gather channels and expects that the user has previously set up +* the buffer descriptor lists. +* +* This function makes use of internal resources that are shared between the +* Start, Stop, and Set/ClearOptions functions. So if one task might be setting +* device options while another is trying to start the device, the user is +* required to provide protection of this shared data (typically using a +* semaphore). +* +* This function must not be preempted by an interrupt that may service the +* device. +* +******************************************************************************/ +void XEmacPs_Start(XEmacPs *InstancePtr) +{ + u32 Reg; + + /* Assert bad arguments and conditions */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY); + + /* Start DMA */ + /* When starting the DMA channels, both transmit and receive sides + * need an initialized BD list. + */ + if (InstancePtr->Version == 2) { + Xil_AssertVoid(InstancePtr->RxBdRing.BaseBdAddr != 0); + Xil_AssertVoid(InstancePtr->TxBdRing.BaseBdAddr != 0); + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_RXQBASE_OFFSET, + InstancePtr->RxBdRing.BaseBdAddr); + + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_TXQBASE_OFFSET, + InstancePtr->TxBdRing.BaseBdAddr); + } + + /* clear any existed int status */ + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_ISR_OFFSET, + XEMACPS_IXR_ALL_MASK); + + /* Enable transmitter if not already enabled */ + if ((InstancePtr->Options & (u32)XEMACPS_TRANSMITTER_ENABLE_OPTION)!=0x00000000U) { + Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET); + if ((!(Reg & XEMACPS_NWCTRL_TXEN_MASK))==TRUE) { + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET, + Reg | (u32)XEMACPS_NWCTRL_TXEN_MASK); + } + } + + /* Enable receiver if not already enabled */ + if ((InstancePtr->Options & XEMACPS_RECEIVER_ENABLE_OPTION) != 0x00000000U) { + Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET); + if ((!(Reg & XEMACPS_NWCTRL_RXEN_MASK))==TRUE) { + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET, + Reg | (u32)XEMACPS_NWCTRL_RXEN_MASK); + } + } + + /* Enable TX and RX interrupts */ + XEmacPs_IntEnable(InstancePtr, (XEMACPS_IXR_TX_ERR_MASK | + XEMACPS_IXR_RX_ERR_MASK | (u32)XEMACPS_IXR_FRAMERX_MASK | + (u32)XEMACPS_IXR_TXCOMPL_MASK)); + + /* Enable TX Q1 Interrupts */ + if (InstancePtr->Version > 2) + XEmacPs_IntQ1Enable(InstancePtr, XEMACPS_INTQ1_IXR_ALL_MASK); + + /* Mark as started */ + InstancePtr->IsStarted = XIL_COMPONENT_IS_STARTED; + + return; +} + + +/*****************************************************************************/ +/** +* Gracefully stop the Ethernet MAC as follows: +* - Disable all interrupts from this device +* - Stop DMA channels +* - Disable the tansmitter and receiver +* +* Device options currently in effect are not changed. +* +* This function will disable all interrupts. Default interrupts settings that +* had been enabled will be restored when XEmacPs_Start() is called. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* +* @note +* This function makes use of internal resources that are shared between the +* Start, Stop, SetOptions, and ClearOptions functions. So if one task might be +* setting device options while another is trying to start the device, the user +* is required to provide protection of this shared data (typically using a +* semaphore). +* +* Stopping the DMA channels causes this function to block until the DMA +* operation is complete. +* +******************************************************************************/ +void XEmacPs_Stop(XEmacPs *InstancePtr) +{ + u32 Reg; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY); + + /* Disable all interrupts */ + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_IDR_OFFSET, + XEMACPS_IXR_ALL_MASK); + + /* Disable the receiver & transmitter */ + Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET); + Reg &= (u32)(~XEMACPS_NWCTRL_RXEN_MASK); + Reg &= (u32)(~XEMACPS_NWCTRL_TXEN_MASK); + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET, Reg); + + /* Mark as stopped */ + InstancePtr->IsStarted = 0U; +} + + +/*****************************************************************************/ +/** +* Perform a graceful reset of the Ethernet MAC. Resets the DMA channels, the +* transmitter, and the receiver. +* +* Steps to reset +* - Stops transmit and receive channels +* - Stops DMA +* - Configure transmit and receive buffer size to default +* - Clear transmit and receive status register and counters +* - Clear all interrupt sources +* - Clear phy (if there is any previously detected) address +* - Clear MAC addresses (1-4) as well as Type IDs and hash value +* +* All options are placed in their default state. Any frames in the +* descriptor lists will remain in the lists. The side effect of doing +* this is that after a reset and following a restart of the device, frames +* were in the list before the reset may be transmitted or received. +* +* The upper layer software is responsible for re-configuring (if necessary) +* and restarting the MAC after the reset. Note also that driver statistics +* are not cleared on reset. It is up to the upper layer software to clear the +* statistics if needed. +* +* When a reset is required, the driver notifies the upper layer software of +* this need through the ErrorHandler callback and specific status codes. +* The upper layer software is responsible for calling this Reset function +* and then re-configuring the device. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* +******************************************************************************/ +void XEmacPs_Reset(XEmacPs *InstancePtr) +{ + u32 Reg; + u8 i; + s8 EmacPs_zero_MAC[6] = { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }; + + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY); + + /* Stop the device and reset hardware */ + XEmacPs_Stop(InstancePtr); + InstancePtr->Options = XEMACPS_DEFAULT_OPTIONS; + + InstancePtr->Version = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, 0xFC); + + InstancePtr->Version = (InstancePtr->Version >> 16) & 0xFFF; + + InstancePtr->MaxMtuSize = XEMACPS_MTU; + InstancePtr->MaxFrameSize = XEMACPS_MTU + XEMACPS_HDR_SIZE + + XEMACPS_TRL_SIZE; + InstancePtr->MaxVlanFrameSize = InstancePtr->MaxFrameSize + + XEMACPS_HDR_VLAN_SIZE; + InstancePtr->RxBufMask = XEMACPS_RXBUF_LEN_MASK; + + /* Setup hardware with default values */ + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET, + (XEMACPS_NWCTRL_STATCLR_MASK | + XEMACPS_NWCTRL_MDEN_MASK) & + (u32)(~XEMACPS_NWCTRL_LOOPEN_MASK)); + + Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCFG_OFFSET); + Reg &= XEMACPS_NWCFG_MDCCLKDIV_MASK; + + Reg = Reg | (u32)XEMACPS_NWCFG_100_MASK | + (u32)XEMACPS_NWCFG_FDEN_MASK | + (u32)XEMACPS_NWCFG_UCASTHASHEN_MASK; + + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCFG_OFFSET, Reg); + if (InstancePtr->Version > 2) { + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_NWCFG_OFFSET, + (XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, XEMACPS_NWCFG_OFFSET) | + XEMACPS_NWCFG_DWIDTH_64_MASK)); + } + + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_DMACR_OFFSET, + (((((u32)XEMACPS_RX_BUF_SIZE / (u32)XEMACPS_RX_BUF_UNIT) + + (((((u32)XEMACPS_RX_BUF_SIZE % + (u32)XEMACPS_RX_BUF_UNIT))!=(u32)0) ? 1U : 0U)) << + (u32)(XEMACPS_DMACR_RXBUF_SHIFT)) & + (u32)(XEMACPS_DMACR_RXBUF_MASK)) | + (u32)XEMACPS_DMACR_RXSIZE_MASK | + (u32)XEMACPS_DMACR_TXSIZE_MASK); + + + /* Single bursts */ + /* FIXME: Why Single bursts? */ + if (InstancePtr->Version > 2) { + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_DMACR_OFFSET, + (XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, XEMACPS_DMACR_OFFSET) | +#ifdef __aarch64__ + (u32)XEMACPS_DMACR_ADDR_WIDTH_64 | +#endif + (u32)XEMACPS_DMACR_INCR16_AHB_BURST)); + } + + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_TXSR_OFFSET, 0x0U); + + XEmacPs_SetQueuePtr(InstancePtr, 0, 0x00U, (u16)XEMACPS_SEND); + if (InstancePtr->Version > 2) + XEmacPs_SetQueuePtr(InstancePtr, 0, 0x01U, (u16)XEMACPS_SEND); + XEmacPs_SetQueuePtr(InstancePtr, 0, 0x00U, (u16)XEMACPS_RECV); + + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_RXSR_OFFSET, 0x0U); + + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_IDR_OFFSET, + XEMACPS_IXR_ALL_MASK); + + Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, + XEMACPS_ISR_OFFSET); + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_ISR_OFFSET, + Reg); + + XEmacPs_ClearHash(InstancePtr); + + for (i = 1U; i < 5U; i++) { + (void)XEmacPs_SetMacAddress(InstancePtr, EmacPs_zero_MAC, i); + (void)XEmacPs_SetTypeIdCheck(InstancePtr, 0x00000000U, i); + } + + /* clear all counters */ + for (i = 0U; i < (u8)((XEMACPS_LAST_OFFSET - XEMACPS_OCTTXL_OFFSET) / 4U); + i++) { + (void)XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, + XEMACPS_OCTTXL_OFFSET + (u32)(((u32)i) * ((u32)4))); + } + + /* Disable the receiver */ + Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET); + Reg &= (u32)(~XEMACPS_NWCTRL_RXEN_MASK); + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_NWCTRL_OFFSET, Reg); + + /* Sync default options with hardware but leave receiver and + * transmitter disabled. They get enabled with XEmacPs_Start() if + * XEMACPS_TRANSMITTER_ENABLE_OPTION and + * XEMACPS_RECEIVER_ENABLE_OPTION are set. + */ + (void)XEmacPs_SetOptions(InstancePtr, InstancePtr->Options & + ~((u32)XEMACPS_TRANSMITTER_ENABLE_OPTION | + (u32)XEMACPS_RECEIVER_ENABLE_OPTION)); + + (void)XEmacPs_ClearOptions(InstancePtr, ~InstancePtr->Options); +} + + +/******************************************************************************/ +/** + * This is a stub for the asynchronous callbacks. The stub is here in case the + * upper layer forgot to set the handler(s). On initialization, all handlers are + * set to this callback. It is considered an error for this handler to be + * invoked. + * + ******************************************************************************/ +void XEmacPs_StubHandler(void) +{ + Xil_AssertVoidAlways(); +} + +/*****************************************************************************/ +/** +* This function sets the start address of the transmit/receive buffer queue. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* @QPtr Address of the Queue to be written +* @QueueNum Buffer Queue Index +* @Direction Transmit/Recive +* +* @note +* The buffer queue addresses has to be set before starting the transfer, so +* this function has to be called in prior to XEmacPs_Start() +* +******************************************************************************/ +void XEmacPs_SetQueuePtr(XEmacPs *InstancePtr, UINTPTR QPtr, u8 QueueNum, + u16 Direction) +{ + /* Assert bad arguments and conditions */ + Xil_AssertVoid(InstancePtr != NULL); + Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY); + + /* If already started, then there is nothing to do */ + if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) { + return; + } + + if (QueueNum == 0x00U) { + if (Direction == XEMACPS_SEND) { + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_TXQBASE_OFFSET, + (QPtr & ULONG64_LO_MASK)); + } else { + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_RXQBASE_OFFSET, + (QPtr & ULONG64_LO_MASK)); + } + } + else { + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_TXQ1BASE_OFFSET, + (QPtr & ULONG64_LO_MASK)); + } +#ifdef __aarch64__ + if (Direction == XEMACPS_SEND) { + /* Set the MSB of TX Queue start address */ + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_MSBBUF_TXQBASE_OFFSET, + (u32)((QPtr & ULONG64_HI_MASK) >> 32U)); + } else { + /* Set the MSB of RX Queue start address */ + XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, + XEMACPS_MSBBUF_RXQBASE_OFFSET, + (u32)((QPtr & ULONG64_HI_MASK) >> 32U)); + } +#endif +} +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps.h new file mode 100644 index 000000000..f12092bec --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps.h @@ -0,0 +1,792 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2016 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/****************************************************************************/ +/** + * + * @file xemacps.h +* @addtogroup emacps_v3_1 +* @{ +* @details + * + * The Xilinx Embedded Processor Block Ethernet driver. + * + * For a full description of XEMACPS features, please see the hardware spec. + * This driver supports the following features: + * - Memory mapped access to host interface registers + * - Statistics counter registers for RMON/MIB + * - API for interrupt driven frame transfers for hardware configured DMA + * - Virtual memory support + * - Unicast, broadcast, and multicast receive address filtering + * - Full and half duplex operation + * - Automatic PAD & FCS insertion and stripping + * - Flow control + * - Support up to four 48bit addresses + * - Address checking for four specific 48bit addresses + * - VLAN frame support + * - Pause frame support + * - Large frame support up to 1536 bytes + * - Checksum offload + * + * Driver Description + * + * The device driver enables higher layer software (e.g., an application) to + * communicate to the XEmacPs. The driver handles transmission and reception + * of Ethernet frames, as well as configuration and control. No pre or post + * processing of frame data is performed. The driver does not validate the + * contents of an incoming frame in addition to what has already occurred in + * hardware. + * A single device driver can support multiple devices even when those devices + * have significantly different configurations. + * + * Initialization & Configuration + * + * The XEmacPs_Config structure is used by the driver to configure itself. + * This configuration structure is typically created by the tool-chain based + * on hardware build properties. + * + * The driver instance can be initialized in + * + * - XEmacPs_CfgInitialize(InstancePtr, CfgPtr, EffectiveAddress): Uses a + * configuration structure provided by the caller. If running in a system + * with address translation, the provided virtual memory base address + * replaces the physical address present in the configuration structure. + * + * The device supports DMA only as current development plan. No FIFO mode is + * supported. The driver expects to start the DMA channels and expects that + * the user has set up the buffer descriptor lists. + * + * Interrupts and Asynchronous Callbacks + * + * The driver has no dependencies on the interrupt controller. When an + * interrupt occurs, the handler will perform a small amount of + * housekeeping work, determine the source of the interrupt, and call the + * appropriate callback function. All callbacks are registered by the user + * level application. + * + * Virtual Memory + * + * All virtual to physical memory mappings must occur prior to accessing the + * driver API. + * + * For DMA transactions, user buffers supplied to the driver must be in terms + * of their physical address. + * + * DMA + * + * The DMA engine uses buffer descriptors (BDs) to describe Ethernet frames. + * These BDs are typically chained together into a list the hardware follows + * when transferring data in and out of the packet buffers. Each BD describes + * a memory region containing either a full or partial Ethernet packet. + * + * Interrupt coalescing is not suppoted from this built-in DMA engine. + * + * This API requires the user to understand how the DMA operates. The + * following paragraphs provide some explanation, but the user is encouraged + * to read documentation in xemacps_bdring.h as well as study example code + * that accompanies this driver. + * + * The API is designed to get BDs to and from the DMA engine in the most + * efficient means possible. The first step is to establish a memory region + * to contain all BDs for a specific channel. This is done with + * XEmacPs_BdRingCreate(). This function sets up a BD ring that hardware will + * follow as BDs are processed. The ring will consist of a user defined number + * of BDs which will all be partially initialized. For example on the transmit + * channel, the driver will initialize all BDs' so that they are configured + * for transmit. The more fields that can be permanently setup at + * initialization, then the fewer accesses will be needed to each BD while + * the DMA engine is in operation resulting in better throughput and CPU + * utilization. The best case initialization would require the user to set + * only a frame buffer address and length prior to submitting the BD to the + * engine. + * + * BDs move through the engine with the help of functions + * XEmacPs_BdRingAlloc(), XEmacPs_BdRingToHw(), XEmacPs_BdRingFromHw(), + * and XEmacPs_BdRingFree(). + * All these functions handle BDs that are in place. That is, there are no + * copies of BDs kept anywhere and any BD the user interacts with is an actual + * BD from the same ring hardware accesses. + * + * BDs in the ring go through a series of states as follows: + * 1. Idle. The driver controls BDs in this state. + * 2. The user has data to transfer. XEmacPs_BdRingAlloc() is called to + * reserve BD(s). Once allocated, the user may setup the BD(s) with + * frame buffer address, length, and other attributes. The user controls + * BDs in this state. + * 3. The user submits BDs to the DMA engine with XEmacPs_BdRingToHw. BDs + * in this state are either waiting to be processed by hardware, are in + * process, or have been processed. The DMA engine controls BDs in this + * state. + * 4. Processed BDs are retrieved with XEmacEpv_BdRingFromHw() by the + * user. Once retrieved, the user can examine each BD for the outcome of + * the DMA transfer. The user controls BDs in this state. After examining + * the BDs the user calls XEmacPs_BdRingFree() which places the BDs back + * into state 1. + * + * Each of the four BD accessor functions operate on a set of BDs. A set is + * defined as a segment of the BD ring consisting of one or more BDs. The user + * views the set as a pointer to the first BD along with the number of BDs for + * that set. The set can be navigated by using macros XEmacPs_BdNext(). The + * user must exercise extreme caution when changing BDs in a set as there is + * nothing to prevent doing a mBdNext past the end of the set and modifying a + * BD out of bounds. + * + * XEmacPs_BdRingAlloc() + XEmacPs_BdRingToHw(), as well as + * XEmacPs_BdRingFromHw() + XEmacPs_BdRingFree() are designed to be used in + * tandem. The same BD set retrieved with BdRingAlloc should be the same one + * provided to hardware with BdRingToHw. Same goes with BdRingFromHw and + * BdRIngFree. + * + * Alignment & Data Cache Restrictions + * + * Due to the design of the hardware, all RX buffers, BDs need to be 4-byte + * aligned. Please reference xemacps_bd.h for cache related macros. + * + * DMA Tx: + * + * - If frame buffers exist in cached memory, then they must be flushed + * prior to committing them to hardware. + * + * DMA Rx: + * + * - If frame buffers exist in cached memory, then the cache must be + * invalidated for the memory region containing the frame prior to data + * access + * + * Both cache invalidate/flush are taken care of in driver code. + * + * Buffer Copying + * + * The driver is designed for a zero-copy buffer scheme. That is, the driver + * will not copy buffers. This avoids potential throughput bottlenecks within + * the driver. If byte copying is required, then the transfer will take longer + * to complete. + * + * Checksum Offloading + * + * The Embedded Processor Block Ethernet can be configured to perform IP, TCP + * and UDP checksum offloading in both receive and transmit directions. + * + * IP packets contain a 16-bit checksum field, which is the 16-bit 1s + * complement of the 1s complement sum of all 16-bit words in the header. + * TCP and UDP packets contain a 16-bit checksum field, which is the 16-bit + * 1s complement of the 1s complement sum of all 16-bit words in the header, + * the data and a conceptual pseudo header. + * + * To calculate these checksums in software requires each byte of the packet + * to be read. For TCP and UDP this can use a large amount of processing power. + * Offloading the checksum calculation to hardware can result in significant + * performance improvements. + * + * The transmit checksum offload is only available to use DMA in packet buffer + * mode. This is because the complete frame to be transmitted must be read + * into the packet buffer memory before the checksum can be calculated and + * written to the header at the beginning of the frame. + * + * For IP, TCP or UDP receive checksum offload to be useful, the operating + * system containing the protocol stack must be aware that this offload is + * available so that it can make use of the fact that the hardware has verified + * the checksum. + * + * When receive checksum offloading is enabled in the hardware, the IP header + * checksum is checked, where the packet meets the following criteria: + * + * 1. If present, the VLAN header must be four octets long and the CFI bit + * must not be set. + * 2. Encapsulation must be RFC 894 Ethernet Type Encoding or RFC 1042 SNAP + * encoding. + * 3. IP v4 packet. + * 4. IP header is of a valid length. + * 5. Good IP header checksum. + * 6. No IP fragmentation. + * 7. TCP or UDP packet. + * + * When an IP, TCP or UDP frame is received, the receive buffer descriptor + * gives an indication if the hardware was able to verify the checksums. + * There is also an indication if the frame had SNAP encapsulation. These + * indication bits will replace the type ID match indication bits when the + * receive checksum offload is enabled. + * + * If any of the checksums are verified incorrect by the hardware, the packet + * is discarded and the appropriate statistics counter incremented. + * + * PHY Interfaces + * + * RGMII 1.3 is the only interface supported. + * + * Asserts + * + * Asserts are used within all Xilinx drivers to enforce constraints on + * parameters. Asserts can be turned off on a system-wide basis by defining, + * at compile time, the NDEBUG identifier. By default, asserts are turned on + * and it is recommended that users leave asserts on during development. For + * deployment use -DNDEBUG compiler switch to remove assert code. + * + * @note + * + * Xilinx drivers are typically composed of two parts, one is the driver + * and the other is the adapter. The driver is independent of OS and processor + * and is intended to be highly portable. The adapter is OS-specific and + * facilitates communication between the driver and an OS. + * This driver is intended to be RTOS and processor independent. Any needs for + * dynamic memory management, threads or thread mutual exclusion, or cache + * control must be satisfied bythe layer above this driver. + * + * 
+ * MODIFICATION HISTORY:
+ *
+ * Ver   Who  Date     Changes
+ * ----- ---- -------- -------------------------------------------------------
+ * 1.00a wsy  01/10/10 First release
+ * 1.00a asa  11/21/11 The function XEmacPs_BdRingFromHwTx in file
+ *		       xemacps_bdring.c is modified. Earlier it was checking for
+ *		       "BdLimit"(passed argument) number of BDs for finding out
+ *		       which BDs are successfully processed. Now one more check
+ *		       is added. It looks for BDs till the current BD pointer
+ *		       reaches HwTail. By doing this processing time is saved.
+ * 1.00a asa  01/24/12 The function XEmacPs_BdRingFromHwTx in file
+ *		       xemacps_bdring.c is modified. Now start of packet is
+ *		       searched for returning the number of BDs processed.
+ * 1.02a asa  11/05/12 Added a new API for deleting an entry from the HASH
+ *		       registers. Added a new API to set the bust length.
+ *		       Added some new hash-defines.
+ * 1.03a asa  01/23/12 Fix for CR #692702 which updates error handling for
+ *		       Rx errors. Under heavy Rx traffic, there will be a large
+ *		       number of errors related to receive buffer not available.
+ *		       Because of a HW bug (SI #692601), under such heavy errors,
+ *		       the Rx data path can become unresponsive. To reduce the
+ *		       probabilities for hitting this HW bug, the SW writes to
+ *		       bit 18 to flush a packet from Rx DPRAM immediately. The
+ *		       changes for it are done in the function
+ *		       XEmacPs_IntrHandler.
+ * 1.05a asa  09/23/13 Cache operations on BDs are not required and hence
+ *		       removed. It is expected that all BDs are allocated in
+ *		       from uncached area.
+ * 1.06a asa  11/02/13 Changed the value for XEMACPS_RXBUF_LEN_MASK from 0x3fff
+ *				to 0x1fff. This fixes the CR#744902.
+ *			  Made changes in example file xemacps_example.h to fix compilation
+ *			  issues with iarcc compiler.
+ * 2.0   adk  10/12/13 Updated as per the New Tcl API's
+ * 2.1   adk  11/08/14 Fixed the CR#811288. Changes are made in the driver tcl file.
+ * 2.1   bss  09/08/14 Modified driver tcl to fix CR#820349 to export phy
+ *		       address in xparameters.h when GMII to RGMII converter
+ *		       is present in hw.
+ * 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp GEM specification and 64-bit
+ *		       changes.
+ * 2.2   adk  29/10/14 Fixed CR#827686 when PCS/PMA core is configured with
+ *                    1000BASE-X mode export proper values to the xparameters.h
+ *                    file. Changes are made in the driver tcl file.
+ * 3.0   adk  08/1/15  Don't include gem in peripheral test when gem is
+ *                    configured with PCS/PMA Core. Changes are made in the
+ *		       test app tcl(CR:827686).
+ * 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+ * 3.0   hk   03/18/15 Added support for jumbo frames. Increase AHB burst.
+ *                     Disable extended mode. Perform all 64 bit changes under
+ *                     check for arch64.
+ *                     Remove "used bit set" from TX error interrupt masks.
+ * 3.1   hk   07/27/15 Do not call error handler with '0' error code when
+ *                     there is no error. CR# 869403
+ *            08/10/15 Update upper 32 bit tx and rx queue ptr registers.
+ * 3.2   hk   02/22/16 Added SGMII support for Zynq Ultrascale+ MPSoC.
+ *
+ * + ****************************************************************************/ + +#ifndef XEMACPS_H /* prevent circular inclusions */ +#define XEMACPS_H /* by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files ********************************/ + +#include "xil_types.h" +#include "xil_assert.h" +#include "xstatus.h" +#include "xemacps_hw.h" +#include "xemacps_bd.h" +#include "xemacps_bdring.h" + +/************************** Constant Definitions ****************************/ + +/* + * Device information + */ +#define XEMACPS_DEVICE_NAME "xemacps" +#define XEMACPS_DEVICE_DESC "Xilinx PS 10/100/1000 MAC" + + +/** @name Configuration options + * + * Device configuration options. See the XEmacPs_SetOptions(), + * XEmacPs_ClearOptions() and XEmacPs_GetOptions() for information on how to + * use options. + * + * The default state of the options are noted and are what the device and + * driver will be set to after calling XEmacPs_Reset() or + * XEmacPs_Initialize(). + * + * @{ + */ + +#define XEMACPS_PROMISC_OPTION 0x00000001U +/**< Accept all incoming packets. + * This option defaults to disabled (cleared) */ + +#define XEMACPS_FRAME1536_OPTION 0x00000002U +/**< Frame larger than 1516 support for Tx & Rx. + * This option defaults to disabled (cleared) */ + +#define XEMACPS_VLAN_OPTION 0x00000004U +/**< VLAN Rx & Tx frame support. + * This option defaults to disabled (cleared) */ + +#define XEMACPS_FLOW_CONTROL_OPTION 0x00000010U +/**< Enable recognition of flow control frames on Rx + * This option defaults to enabled (set) */ + +#define XEMACPS_FCS_STRIP_OPTION 0x00000020U +/**< Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not + * stripped. + * This option defaults to enabled (set) */ + +#define XEMACPS_FCS_INSERT_OPTION 0x00000040U +/**< Generate FCS field and add PAD automatically for outgoing frames. + * This option defaults to disabled (cleared) */ + +#define XEMACPS_LENTYPE_ERR_OPTION 0x00000080U +/**< Enable Length/Type error checking for incoming frames. When this option is + * set, the MAC will filter frames that have a mismatched type/length field + * and if XEMACPS_REPORT_RXERR_OPTION is set, the user is notified when these + * types of frames are encountered. When this option is cleared, the MAC will + * allow these types of frames to be received. + * + * This option defaults to disabled (cleared) */ + +#define XEMACPS_TRANSMITTER_ENABLE_OPTION 0x00000100U +/**< Enable the transmitter. + * This option defaults to enabled (set) */ + +#define XEMACPS_RECEIVER_ENABLE_OPTION 0x00000200U +/**< Enable the receiver + * This option defaults to enabled (set) */ + +#define XEMACPS_BROADCAST_OPTION 0x00000400U +/**< Allow reception of the broadcast address + * This option defaults to enabled (set) */ + +#define XEMACPS_MULTICAST_OPTION 0x00000800U +/**< Allows reception of multicast addresses programmed into hash + * This option defaults to disabled (clear) */ + +#define XEMACPS_RX_CHKSUM_ENABLE_OPTION 0x00001000U +/**< Enable the RX checksum offload + * This option defaults to enabled (set) */ + +#define XEMACPS_TX_CHKSUM_ENABLE_OPTION 0x00002000U +/**< Enable the TX checksum offload + * This option defaults to enabled (set) */ + +#define XEMACPS_JUMBO_ENABLE_OPTION 0x00004000U +#define XEMACPS_SGMII_ENABLE_OPTION 0x00008000U + +#define XEMACPS_DEFAULT_OPTIONS \ + ((u32)XEMACPS_FLOW_CONTROL_OPTION | \ + (u32)XEMACPS_FCS_INSERT_OPTION | \ + (u32)XEMACPS_FCS_STRIP_OPTION | \ + (u32)XEMACPS_BROADCAST_OPTION | \ + (u32)XEMACPS_LENTYPE_ERR_OPTION | \ + (u32)XEMACPS_TRANSMITTER_ENABLE_OPTION | \ + (u32)XEMACPS_RECEIVER_ENABLE_OPTION | \ + (u32)XEMACPS_RX_CHKSUM_ENABLE_OPTION | \ + (u32)XEMACPS_TX_CHKSUM_ENABLE_OPTION) + +/**< Default options set when device is initialized or reset */ +/*@}*/ + +/** @name Callback identifiers + * + * These constants are used as parameters to XEmacPs_SetHandler() + * @{ + */ +#define XEMACPS_HANDLER_DMASEND 1U +#define XEMACPS_HANDLER_DMARECV 2U +#define XEMACPS_HANDLER_ERROR 3U +/*@}*/ + +/* Constants to determine the configuration of the hardware device. They are + * used to allow the driver to verify it can operate with the hardware. + */ +#define XEMACPS_MDIO_DIV_DFT MDC_DIV_32 /**< Default MDIO clock divisor */ + +/* The next few constants help upper layers determine the size of memory + * pools used for Ethernet buffers and descriptor lists. + */ +#define XEMACPS_MAC_ADDR_SIZE 6U /* size of Ethernet header */ + +#define XEMACPS_MTU 1500U /* max MTU size of Ethernet frame */ +#define XEMACPS_MTU_JUMBO 10240U /* max MTU size of jumbo frame */ +#define XEMACPS_HDR_SIZE 14U /* size of Ethernet header */ +#define XEMACPS_HDR_VLAN_SIZE 18U /* size of Ethernet header with VLAN */ +#define XEMACPS_TRL_SIZE 4U /* size of Ethernet trailer (FCS) */ +#define XEMACPS_MAX_FRAME_SIZE (XEMACPS_MTU + XEMACPS_HDR_SIZE + \ + XEMACPS_TRL_SIZE) +#define XEMACPS_MAX_VLAN_FRAME_SIZE (XEMACPS_MTU + XEMACPS_HDR_SIZE + \ + XEMACPS_HDR_VLAN_SIZE + XEMACPS_TRL_SIZE) +#define XEMACPS_MAX_VLAN_FRAME_SIZE_JUMBO (XEMACPS_MTU_JUMBO + XEMACPS_HDR_SIZE + \ + XEMACPS_HDR_VLAN_SIZE + XEMACPS_TRL_SIZE) + +/* DMACR Bust length hash defines */ + +#define XEMACPS_SINGLE_BURST 0x00000001 +#define XEMACPS_4BYTE_BURST 0x00000004 +#define XEMACPS_8BYTE_BURST 0x00000008 +#define XEMACPS_16BYTE_BURST 0x00000010 + + +/**************************** Type Definitions ******************************/ +/** @name Typedefs for callback functions + * + * These callbacks are invoked in interrupt context. + * @{ + */ +/** + * Callback invoked when frame(s) have been sent or received in interrupt + * driven DMA mode. To set the send callback, invoke XEmacPs_SetHandler(). + * + * @param CallBackRef is user data assigned when the callback was set. + * + * @note + * See xemacps_hw.h for bitmasks definitions and the device hardware spec for + * further information on their meaning. + * + */ +typedef void (*XEmacPs_Handler) (void *CallBackRef); + +/** + * Callback when an asynchronous error occurs. To set this callback, invoke + * XEmacPs_SetHandler() with XEMACPS_HANDLER_ERROR in the HandlerType + * paramter. + * + * @param CallBackRef is user data assigned when the callback was set. + * @param Direction defines either receive or transmit error(s) has occurred. + * @param ErrorWord definition varies with Direction + * + */ +typedef void (*XEmacPs_ErrHandler) (void *CallBackRef, u8 Direction, + u32 ErrorWord); + +/*@}*/ + +/** + * This typedef contains configuration information for a device. + */ +typedef struct { + u16 DeviceId; /**< Unique ID of device */ + UINTPTR BaseAddress;/**< Physical base address of IPIF registers */ +} XEmacPs_Config; + + +/** + * The XEmacPs driver instance data. The user is required to allocate a + * structure of this type for every XEmacPs device in the system. A pointer + * to a structure of this type is then passed to the driver API functions. + */ +typedef struct XEmacPs_Instance { + XEmacPs_Config Config; /* Hardware configuration */ + u32 IsStarted; /* Device is currently started */ + u32 IsReady; /* Device is initialized and ready */ + u32 Options; /* Current options word */ + + XEmacPs_BdRing TxBdRing; /* Transmit BD ring */ + XEmacPs_BdRing RxBdRing; /* Receive BD ring */ + + XEmacPs_Handler SendHandler; + XEmacPs_Handler RecvHandler; + void *SendRef; + void *RecvRef; + + XEmacPs_ErrHandler ErrorHandler; + void *ErrorRef; + u32 Version; + u32 RxBufMask; + u32 MaxMtuSize; + u32 MaxFrameSize; + u32 MaxVlanFrameSize; + +} XEmacPs; + + +/***************** Macros (Inline Functions) Definitions ********************/ + +/****************************************************************************/ +/** +* Retrieve the Tx ring object. This object can be used in the various Ring +* API functions. +* +* @param InstancePtr is the DMA channel to operate on. +* +* @return TxBdRing attribute +* +* @note +* C-style signature: +* XEmacPs_BdRing XEmacPs_GetTxRing(XEmacPs *InstancePtr) +* +*****************************************************************************/ +#define XEmacPs_GetTxRing(InstancePtr) ((InstancePtr)->TxBdRing) + +/****************************************************************************/ +/** +* Retrieve the Rx ring object. This object can be used in the various Ring +* API functions. +* +* @param InstancePtr is the DMA channel to operate on. +* +* @return RxBdRing attribute +* +* @note +* C-style signature: +* XEmacPs_BdRing XEmacPs_GetRxRing(XEmacPs *InstancePtr) +* +*****************************************************************************/ +#define XEmacPs_GetRxRing(InstancePtr) ((InstancePtr)->RxBdRing) + +/****************************************************************************/ +/** +* +* Enable interrupts specified in Mask. The corresponding interrupt for +* each bit set to 1 in Mask, will be enabled. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* @param Mask contains a bit mask of interrupts to enable. The mask can +* be formed using a set of bitwise or'd values. +* +* @note +* The state of the transmitter and receiver are not modified by this function. +* C-style signature +* void XEmacPs_IntEnable(XEmacPs *InstancePtr, u32 Mask) +* +*****************************************************************************/ +#define XEmacPs_IntEnable(InstancePtr, Mask) \ + XEmacPs_WriteReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_IER_OFFSET, \ + ((Mask) & XEMACPS_IXR_ALL_MASK)); + +/****************************************************************************/ +/** +* +* Disable interrupts specified in Mask. The corresponding interrupt for +* each bit set to 1 in Mask, will be enabled. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* @param Mask contains a bit mask of interrupts to disable. The mask can +* be formed using a set of bitwise or'd values. +* +* @note +* The state of the transmitter and receiver are not modified by this function. +* C-style signature +* void XEmacPs_IntDisable(XEmacPs *InstancePtr, u32 Mask) +* +*****************************************************************************/ +#define XEmacPs_IntDisable(InstancePtr, Mask) \ + XEmacPs_WriteReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_IDR_OFFSET, \ + ((Mask) & XEMACPS_IXR_ALL_MASK)); + +/****************************************************************************/ +/** +* +* Enable interrupts specified in Mask. The corresponding interrupt for +* each bit set to 1 in Mask, will be enabled. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* @param Mask contains a bit mask of interrupts to enable. The mask can +* be formed using a set of bitwise or'd values. +* +* @note +* The state of the transmitter and receiver are not modified by this function. +* C-style signature +* void XEmacPs_IntQ1Enable(XEmacPs *InstancePtr, u32 Mask) +* +*****************************************************************************/ +#define XEmacPs_IntQ1Enable(InstancePtr, Mask) \ + XEmacPs_WriteReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_INTQ1_IER_OFFSET, \ + ((Mask) & XEMACPS_INTQ1_IXR_ALL_MASK)); + +/****************************************************************************/ +/** +* +* Disable interrupts specified in Mask. The corresponding interrupt for +* each bit set to 1 in Mask, will be enabled. +* +* @param InstancePtr is a pointer to the instance to be worked on. +* @param Mask contains a bit mask of interrupts to disable. The mask can +* be formed using a set of bitwise or'd values. +* +* @note +* The state of the transmitter and receiver are not modified by this function. +* C-style signature +* void XEmacPs_IntDisable(XEmacPs *InstancePtr, u32 Mask) +* +*****************************************************************************/ +#define XEmacPs_IntQ1Disable(InstancePtr, Mask) \ + XEmacPs_WriteReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_INTQ1_IDR_OFFSET, \ + ((Mask) & XEMACPS_INTQ1_IXR_ALL_MASK)); + +/****************************************************************************/ +/** +* +* This macro triggers trasmit circuit to send data currently in TX buffer(s). +* +* @param InstancePtr is a pointer to the XEmacPs instance to be worked on. +* +* @return +* +* @note +* +* Signature: void XEmacPs_Transmit(XEmacPs *InstancePtr) +* +*****************************************************************************/ +#define XEmacPs_Transmit(InstancePtr) \ + XEmacPs_WriteReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_NWCTRL_OFFSET, \ + (XEmacPs_ReadReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_NWCTRL_OFFSET) | XEMACPS_NWCTRL_STARTTX_MASK)) + +/****************************************************************************/ +/** +* +* This macro determines if the device is configured with checksum offloading +* on the receive channel +* +* @param InstancePtr is a pointer to the XEmacPs instance to be worked on. +* +* @return +* +* Boolean TRUE if the device is configured with checksum offloading, or +* FALSE otherwise. +* +* @note +* +* Signature: u32 XEmacPs_IsRxCsum(XEmacPs *InstancePtr) +* +*****************************************************************************/ +#define XEmacPs_IsRxCsum(InstancePtr) \ + ((XEmacPs_ReadReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_NWCFG_OFFSET) & XEMACPS_NWCFG_RXCHKSUMEN_MASK) != 0U \ + ? TRUE : FALSE) + +/****************************************************************************/ +/** +* +* This macro determines if the device is configured with checksum offloading +* on the transmit channel +* +* @param InstancePtr is a pointer to the XEmacPs instance to be worked on. +* +* @return +* +* Boolean TRUE if the device is configured with checksum offloading, or +* FALSE otherwise. +* +* @note +* +* Signature: u32 XEmacPs_IsTxCsum(XEmacPs *InstancePtr) +* +*****************************************************************************/ +#define XEmacPs_IsTxCsum(InstancePtr) \ + ((XEmacPs_ReadReg((InstancePtr)->Config.BaseAddress, \ + XEMACPS_DMACR_OFFSET) & XEMACPS_DMACR_TCPCKSUM_MASK) != 0U \ + ? TRUE : FALSE) + +/************************** Function Prototypes *****************************/ + +/* + * Initialization functions in xemacps.c + */ +LONG XEmacPs_CfgInitialize(XEmacPs *InstancePtr, XEmacPs_Config *CfgPtr, + UINTPTR EffectiveAddress); +void XEmacPs_Start(XEmacPs *InstancePtr); +void XEmacPs_Stop(XEmacPs *InstancePtr); +void XEmacPs_Reset(XEmacPs *InstancePtr); +void XEmacPs_SetQueuePtr(XEmacPs *InstancePtr, UINTPTR QPtr, u8 QueueNum, + u16 Direction); + +/* + * Lookup configuration in xemacps_sinit.c + */ +XEmacPs_Config *XEmacPs_LookupConfig(u16 DeviceId); + +/* + * Interrupt-related functions in xemacps_intr.c + * DMA only and FIFO is not supported. This DMA does not support coalescing. + */ +LONG XEmacPs_SetHandler(XEmacPs *InstancePtr, u32 HandlerType, + void *FuncPointer, void *CallBackRef); +void XEmacPs_IntrHandler(void *XEmacPsPtr); + +/* + * MAC configuration/control functions in XEmacPs_control.c + */ +LONG XEmacPs_SetOptions(XEmacPs *InstancePtr, u32 Options); +LONG XEmacPs_ClearOptions(XEmacPs *InstancePtr, u32 Options); +u32 XEmacPs_GetOptions(XEmacPs *InstancePtr); + +LONG XEmacPs_SetMacAddress(XEmacPs *InstancePtr, void *AddressPtr, u8 Index); +LONG XEmacPs_DeleteHash(XEmacPs *InstancePtr, void *AddressPtr); +void XEmacPs_GetMacAddress(XEmacPs *InstancePtr, void *AddressPtr, u8 Index); + +LONG XEmacPs_SetHash(XEmacPs *InstancePtr, void *AddressPtr); +void XEmacPs_ClearHash(XEmacPs *InstancePtr); +void XEmacPs_GetHash(XEmacPs *InstancePtr, void *AddressPtr); + +void XEmacPs_SetMdioDivisor(XEmacPs *InstancePtr, + XEmacPs_MdcDiv Divisor); +void XEmacPs_SetOperatingSpeed(XEmacPs *InstancePtr, u16 Speed); +u16 XEmacPs_GetOperatingSpeed(XEmacPs *InstancePtr); +LONG XEmacPs_PhyRead(XEmacPs *InstancePtr, u32 PhyAddress, + u32 RegisterNum, u16 *PhyDataPtr); +LONG XEmacPs_PhyWrite(XEmacPs *InstancePtr, u32 PhyAddress, + u32 RegisterNum, u16 PhyData); +LONG XEmacPs_SetTypeIdCheck(XEmacPs *InstancePtr, u32 Id_Check, u8 Index); + +LONG XEmacPs_SendPausePacket(XEmacPs *InstancePtr); +void XEmacPs_DMABLengthUpdate(XEmacPs *InstancePtr, s32 BLength); + +#ifdef __cplusplus +} +#endif + +#endif /* end of protection macro */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bd.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bd.h new file mode 100644 index 000000000..52c5f7e7e --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bd.h @@ -0,0 +1,804 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** + * + * @file xemacps_bd.h +* @addtogroup emacps_v3_1 +* @{ + * + * This header provides operations to manage buffer descriptors in support + * of scatter-gather DMA. + * + * The API exported by this header defines abstracted macros that allow the + * user to read/write specific BD fields. + * + * Buffer Descriptors + * + * A buffer descriptor (BD) defines a DMA transaction. The macros defined by + * this header file allow access to most fields within a BD to tailor a DMA + * transaction according to user and hardware requirements. See the hardware + * IP DMA spec for more information on BD fields and how they affect transfers. + * + * The XEmacPs_Bd structure defines a BD. The organization of this structure + * is driven mainly by the hardware for use in scatter-gather DMA transfers. + * + * Performance + * + * Limiting I/O to BDs can improve overall performance of the DMA channel. + * + * 
+ * MODIFICATION HISTORY:
+ *
+ * Ver   Who  Date     Changes
+ * ----- ---- -------- -------------------------------------------------------
+ * 1.00a wsy  01/10/10 First release
+ * 2.1   srt  07/15/14 Add support for Zynq Ultrascale MP GEM specification
+ *                     and 64-bit changes.
+ * 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+ * 3.0   hk   02/20/15 Added support for jumbo frames.
+ *                     Disable extended mode. Perform all 64 bit changes under
+ *                     check for arch64.
+ * 3.2   hk   11/18/15 Change BD typedef and number of words.
+ *
+ *
+ * + * *************************************************************************** + */ + +#ifndef XEMACPS_BD_H /* prevent circular inclusions */ +#define XEMACPS_BD_H /* by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files *********************************/ + +#include +#include "xil_types.h" +#include "xil_assert.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ +#ifdef __aarch64__ +/* Minimum BD alignment */ +#define XEMACPS_DMABD_MINIMUM_ALIGNMENT 64U +#define XEMACPS_BD_NUM_WORDS 4U +#else +/* Minimum BD alignment */ +#define XEMACPS_DMABD_MINIMUM_ALIGNMENT 4U +#define XEMACPS_BD_NUM_WORDS 2U +#endif + +/** + * The XEmacPs_Bd is the type for buffer descriptors (BDs). + */ +typedef u32 XEmacPs_Bd[XEMACPS_BD_NUM_WORDS]; + + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/** + * Zero out BD fields + * + * @param BdPtr is the BD pointer to operate on + * + * @return Nothing + * + * @note + * C-style signature: + * void XEmacPs_BdClear(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdClear(BdPtr) \ + memset((BdPtr), 0, sizeof(XEmacPs_Bd)) + +/****************************************************************************/ +/** +* +* Read the given Buffer Descriptor word. +* +* @param BaseAddress is the base address of the BD to read +* @param Offset is the word offset to be read +* +* @return The 32-bit value of the field +* +* @note +* C-style signature: +* u32 XEmacPs_BdRead(UINTPTR BaseAddress, UINTPTR Offset) +* +*****************************************************************************/ +#define XEmacPs_BdRead(BaseAddress, Offset) \ + (*(u32 *)((UINTPTR)((void*)(BaseAddress)) + (u32)(Offset))) + +/****************************************************************************/ +/** +* +* Write the given Buffer Descriptor word. +* +* @param BaseAddress is the base address of the BD to write +* @param Offset is the word offset to be written +* @param Data is the 32-bit value to write to the field +* +* @return None. +* +* @note +* C-style signature: +* void XEmacPs_BdWrite(UINTPTR BaseAddress, UINTPTR Offset, UINTPTR Data) +* +*****************************************************************************/ +#define XEmacPs_BdWrite(BaseAddress, Offset, Data) \ + (*(u32 *)((UINTPTR)(void*)(BaseAddress) + (u32)(Offset)) = (u32)(Data)) + +/*****************************************************************************/ +/** + * Set the BD's Address field (word 0). + * + * @param BdPtr is the BD pointer to operate on + * @param Addr is the value to write to BD's status field. + * + * @note : + * + * C-style signature: + * void XEmacPs_BdSetAddressTx(XEmacPs_Bd* BdPtr, UINTPTR Addr) + * + *****************************************************************************/ +#ifdef __aarch64__ +#define XEmacPs_BdSetAddressTx(BdPtr, Addr) \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_OFFSET, \ + (u32)((Addr) & ULONG64_LO_MASK)); \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_HI_OFFSET, \ + (u32)(((Addr) & ULONG64_HI_MASK) >> 32U)); +#else +#define XEmacPs_BdSetAddressTx(BdPtr, Addr) \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_OFFSET, (u32)(Addr)) +#endif + +/*****************************************************************************/ +/** + * Set the BD's Address field (word 0). + * + * @param BdPtr is the BD pointer to operate on + * @param Addr is the value to write to BD's status field. + * + * @note : Due to some bits are mixed within recevie BD's address field, + * read-modify-write is performed. + * + * C-style signature: + * void XEmacPs_BdSetAddressRx(XEmacPs_Bd* BdPtr, UINTPTR Addr) + * + *****************************************************************************/ +#ifdef __aarch64__ +#define XEmacPs_BdSetAddressRx(BdPtr, Addr) \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_OFFSET, \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET) & \ + ~XEMACPS_RXBUF_ADD_MASK) | ((u32)((Addr) & ULONG64_LO_MASK)))); \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_HI_OFFSET, \ + (u32)(((Addr) & ULONG64_HI_MASK) >> 32U)); +#else +#define XEmacPs_BdSetAddressRx(BdPtr, Addr) \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_OFFSET, \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET) & \ + ~XEMACPS_RXBUF_ADD_MASK) | (UINTPTR)(Addr))) +#endif + +/*****************************************************************************/ +/** + * Set the BD's Status field (word 1). + * + * @param BdPtr is the BD pointer to operate on + * @param Data is the value to write to BD's status field. + * + * @note + * C-style signature: + * void XEmacPs_BdSetStatus(XEmacPs_Bd* BdPtr, UINTPTR Data) + * + *****************************************************************************/ +#define XEmacPs_BdSetStatus(BdPtr, Data) \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) | (Data)) + + +/*****************************************************************************/ +/** + * Retrieve the BD's Packet DMA transfer status word (word 1). + * + * @param BdPtr is the BD pointer to operate on + * + * @return Status word + * + * @note + * C-style signature: + * u32 XEmacPs_BdGetStatus(XEmacPs_Bd* BdPtr) + * + * Due to the BD bit layout differences in transmit and receive. User's + * caution is required. + *****************************************************************************/ +#define XEmacPs_BdGetStatus(BdPtr) \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) + + +/*****************************************************************************/ +/** + * Get the address (bits 0..31) of the BD's buffer address (word 0) + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdGetBufAddr(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#ifdef __aarch64__ +#define XEmacPs_BdGetBufAddr(BdPtr) \ + (XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET) | \ + (XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_HI_OFFSET)) << 32U) +#else +#define XEmacPs_BdGetBufAddr(BdPtr) \ + (XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET)) +#endif + +/*****************************************************************************/ +/** + * Set transfer length in bytes for the given BD. The length must be set each + * time a BD is submitted to hardware. + * + * @param BdPtr is the BD pointer to operate on + * @param LenBytes is the number of bytes to transfer. + * + * @note + * C-style signature: + * void XEmacPs_BdSetLength(XEmacPs_Bd* BdPtr, u32 LenBytes) + * + *****************************************************************************/ +#define XEmacPs_BdSetLength(BdPtr, LenBytes) \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + ~XEMACPS_TXBUF_LEN_MASK) | (LenBytes))) + + + +/*****************************************************************************/ +/** + * Set transfer length in bytes for the given BD. The length must be set each + * time a BD is submitted to hardware. + * + * @param BdPtr is the BD pointer to operate on + * @param LenBytes is the number of bytes to transfer. + * + * @note + * C-style signature: + * void XEmacPs_BdSetLength(XEmacPs_Bd* BdPtr, u32 LenBytes) + * + *****************************************************************************/ +#define XEmacPs_BdSetLength(BdPtr, LenBytes) \ + XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + ~XEMACPS_TXBUF_LEN_MASK) | (LenBytes))) + + +/*****************************************************************************/ +/** + * Retrieve the BD length field. + * + * For Tx channels, the returned value is the same as that written with + * XEmacPs_BdSetLength(). + * + * For Rx channels, the returned value is the size of the received packet. + * + * @param BdPtr is the BD pointer to operate on + * + * @return Length field processed by hardware or set by + * XEmacPs_BdSetLength(). + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdGetLength(XEmacPs_Bd* BdPtr) + * XEAMCPS_RXBUF_LEN_MASK is same as XEMACPS_TXBUF_LEN_MASK. + * + *****************************************************************************/ +#define XEmacPs_BdGetLength(BdPtr) \ + (XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_LEN_MASK) + +/*****************************************************************************/ +/** + * Retrieve the RX frame size. + * + * The returned value is the size of the received packet. + * This API supports jumbo frame sizes if enabled. + * + * @param BdPtr is the BD pointer to operate on + * + * @return Length field processed by hardware or set by + * XEmacPs_BdSetLength(). + * + * @note + * C-style signature: + * UINTPTR XEmacPs_GetRxFrameSize(XEmacPs* InstancePtr, XEmacPs_Bd* BdPtr) + * RxBufMask is dependent on whether jumbo is enabled or not. + * + *****************************************************************************/ +#define XEmacPs_GetRxFrameSize(InstancePtr, BdPtr) \ + (XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + (InstancePtr)->RxBufMask) + +/*****************************************************************************/ +/** + * Test whether the given BD has been marked as the last BD of a packet. + * + * @param BdPtr is the BD pointer to operate on + * + * @return TRUE if BD represents the "Last" BD of a packet, FALSE otherwise + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsLast(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsLast(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_EOF_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Tell the DMA engine that the given transmit BD marks the end of the current + * packet to be processed. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * void XEmacPs_BdSetLast(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdSetLast(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) | \ + XEMACPS_TXBUF_LAST_MASK)) + + +/*****************************************************************************/ +/** + * Tell the DMA engine that the current packet does not end with the given + * BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * void XEmacPs_BdClearLast(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdClearLast(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + ~XEMACPS_TXBUF_LAST_MASK)) + + +/*****************************************************************************/ +/** + * Set this bit to mark the last descriptor in the receive buffer descriptor + * list. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * void XEmacPs_BdSetRxWrap(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +/*#define XEmacPs_BdSetRxWrap(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET) | \ + XEMACPS_RXBUF_WRAP_MASK)) +*/ + +/*****************************************************************************/ +/** + * Determine the wrap bit of the receive BD which indicates end of the + * BD list. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * u8 XEmacPs_BdIsRxWrap(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxWrap(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET) & \ + XEMACPS_RXBUF_WRAP_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Sets this bit to mark the last descriptor in the transmit buffer + * descriptor list. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * void XEmacPs_BdSetTxWrap(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +/*#define XEmacPs_BdSetTxWrap(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) | \ + XEMACPS_TXBUF_WRAP_MASK)) +*/ + +/*****************************************************************************/ +/** + * Determine the wrap bit of the transmit BD which indicates end of the + * BD list. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * u8 XEmacPs_BdGetTxWrap(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsTxWrap(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_TXBUF_WRAP_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/* + * Must clear this bit to enable the MAC to write data to the receive + * buffer. Hardware sets this bit once it has successfully written a frame to + * memory. Once set, software has to clear the bit before the buffer can be + * used again. This macro clear the new bit of the receive BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * void XEmacPs_BdClearRxNew(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdClearRxNew(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_ADDR_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET) & \ + ~XEMACPS_RXBUF_NEW_MASK)) + + +/*****************************************************************************/ +/** + * Determine the new bit of the receive BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsRxNew(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxNew(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_ADDR_OFFSET) & \ + XEMACPS_RXBUF_NEW_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Software sets this bit to disable the buffer to be read by the hardware. + * Hardware sets this bit for the first buffer of a frame once it has been + * successfully transmitted. This macro sets this bit of transmit BD to avoid + * confusion. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * void XEmacPs_BdSetTxUsed(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdSetTxUsed(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) | \ + XEMACPS_TXBUF_USED_MASK)) + + +/*****************************************************************************/ +/** + * Software clears this bit to enable the buffer to be read by the hardware. + * Hardware sets this bit for the first buffer of a frame once it has been + * successfully transmitted. This macro clears this bit of transmit BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * void XEmacPs_BdClearTxUsed(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdClearTxUsed(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + ~XEMACPS_TXBUF_USED_MASK)) + + +/*****************************************************************************/ +/** + * Determine the used bit of the transmit BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsTxUsed(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsTxUsed(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_TXBUF_USED_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine if a frame fails to be transmitted due to too many retries. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsTxRetry(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsTxRetry(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_TXBUF_RETRY_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine if a frame fails to be transmitted due to data can not be + * feteched in time or buffers are exhausted. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsTxUrun(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsTxUrun(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_TXBUF_URUN_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine if a frame fails to be transmitted due to buffer is exhausted + * mid-frame. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsTxExh(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsTxExh(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_TXBUF_EXH_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Sets this bit, no CRC will be appended to the current frame. This control + * bit must be set for the first buffer in a frame and will be ignored for + * the subsequent buffers of a frame. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * This bit must be clear when using the transmit checksum generation offload, + * otherwise checksum generation and substitution will not occur. + * + * C-style signature: + * UINTPTR XEmacPs_BdSetTxNoCRC(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdSetTxNoCRC(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) | \ + XEMACPS_TXBUF_NOCRC_MASK)) + + +/*****************************************************************************/ +/** + * Clear this bit, CRC will be appended to the current frame. This control + * bit must be set for the first buffer in a frame and will be ignored for + * the subsequent buffers of a frame. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * This bit must be clear when using the transmit checksum generation offload, + * otherwise checksum generation and substitution will not occur. + * + * C-style signature: + * UINTPTR XEmacPs_BdClearTxNoCRC(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdClearTxNoCRC(BdPtr) \ + (XEmacPs_BdWrite((BdPtr), XEMACPS_BD_STAT_OFFSET, \ + XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + ~XEMACPS_TXBUF_NOCRC_MASK)) + + +/*****************************************************************************/ +/** + * Determine the broadcast bit of the receive BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsRxBcast(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxBcast(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_BCAST_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine the multicast hash bit of the receive BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsRxMultiHash(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxMultiHash(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_MULTIHASH_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine the unicast hash bit of the receive BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsRxUniHash(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxUniHash(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_UNIHASH_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine if the received frame is a VLAN Tagged frame. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsRxVlan(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxVlan(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_VLAN_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine if the received frame has Type ID of 8100h and null VLAN + * identifier(Priority tag). + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsRxPri(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxPri(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_PRI_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine if the received frame's Concatenation Format Indicator (CFI) of + * the frames VLANTCI field was set. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdIsRxCFI(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxCFI(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_CFI_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine the End Of Frame (EOF) bit of the receive BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdGetRxEOF(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxEOF(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_EOF_MASK)!=0U ? TRUE : FALSE) + + +/*****************************************************************************/ +/** + * Determine the Start Of Frame (SOF) bit of the receive BD. + * + * @param BdPtr is the BD pointer to operate on + * + * @note + * C-style signature: + * UINTPTR XEmacPs_BdGetRxSOF(XEmacPs_Bd* BdPtr) + * + *****************************************************************************/ +#define XEmacPs_BdIsRxSOF(BdPtr) \ + ((XEmacPs_BdRead((BdPtr), XEMACPS_BD_STAT_OFFSET) & \ + XEMACPS_RXBUF_SOF_MASK)!=0U ? TRUE : FALSE) + + +/************************** Function Prototypes ******************************/ + +#ifdef __cplusplus +} +#endif + +#endif /* end of protection macro */ +/** @} */ diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bdring.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bdring.c new file mode 100644 index 000000000..d837e1df1 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bdring.c @@ -0,0 +1,1075 @@ +/****************************************************************************** +* +* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* Use of the Software is limited solely to applications: +* (a) running on a Xilinx device, or +* (b) that interact with a Xilinx device through a bus or interconnect. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +* SOFTWARE. +* +* Except as contained in this notice, the name of the Xilinx shall not be used +* in advertising or otherwise to promote the sale, use or other dealings in +* this Software without prior written authorization from Xilinx. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemacps_bdring.c +* @addtogroup emacps_v3_1 +* @{ +* +* This file implements buffer descriptor ring related functions. +* +* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release
+* 1.00a asa  11/21/11 The function XEmacPs_BdRingFromHwTx is modified.
+*		      Earlier it used to search in "BdLimit" number of BDs to
+*		      know which BDs are processed. Now one more check is
+*		      added. It looks for BDs till the current BD pointer
+*		      reaches HwTail. By doing this processing time is saved.
+* 1.00a asa  01/24/12 The function XEmacPs_BdRingFromHwTx in file
+*		      xemacps_bdring.c is modified. Now start of packet is
+*		      searched for returning the number of BDs processed.
+* 1.05a asa  09/23/13 Cache operations on BDs are not required and hence
+*		      removed. It is expected that all BDs are allocated in
+*		      from uncached area. Fix for CR #663885.
+* 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp architecture.
+* 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+*
+******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xstatus.h" +#include "xil_cache.h" +#include "xemacps_hw.h" +#include "xemacps_bd.h" +#include "xemacps_bdring.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + + +/***************** Macros (Inline Functions) Definitions *********************/ + +/**************************************************************************** + * Compute the virtual address of a descriptor from its physical address + * + * @param BdPtr is the physical address of the BD + * + * @returns Virtual address of BdPtr + * + * @note Assume BdPtr is always a valid BD in the ring + ****************************************************************************/ +#define XEMACPS_PHYS_TO_VIRT(BdPtr) \ + ((UINTPTR)(BdPtr) + (RingPtr->BaseBdAddr - RingPtr->PhysBaseAddr)) + +/**************************************************************************** + * Compute the physical address of a descriptor from its virtual address + * + * @param BdPtr is the physical address of the BD + * + * @returns Physical address of BdPtr + * + * @note Assume BdPtr is always a valid BD in the ring + ****************************************************************************/ +#define XEMACPS_VIRT_TO_PHYS(BdPtr) \ + ((UINTPTR)(BdPtr) - (RingPtr->BaseBdAddr - RingPtr->PhysBaseAddr)) + +/**************************************************************************** + * Move the BdPtr argument ahead an arbitrary number of BDs wrapping around + * to the beginning of the ring if needed. + * + * We know if a wrapaound should occur if the new BdPtr is greater than + * the high address in the ring OR if the new BdPtr crosses over the + * 0xFFFFFFFF to 0 boundary. The latter test is a valid one since we do not + * allow a BD space to span this boundary. + * + * @param RingPtr is the ring BdPtr appears in + * @param BdPtr on input is the starting BD position and on output is the + * final BD position + * @param NumBd is the number of BD spaces to increment + * + ****************************************************************************/ +#define XEMACPS_RING_SEEKAHEAD(RingPtr, BdPtr, NumBd) \ + { \ + UINTPTR Addr = (UINTPTR)(void *)(BdPtr); \ + \ + Addr += ((RingPtr)->Separation * (NumBd)); \ + if ((Addr > (RingPtr)->HighBdAddr) || ((UINTPTR)(void *)(BdPtr) > Addr)) \ + { \ + Addr -= (RingPtr)->Length; \ + } \ + \ + (BdPtr) = (XEmacPs_Bd*)(void *)Addr; \ + } + +/**************************************************************************** + * Move the BdPtr argument backwards an arbitrary number of BDs wrapping + * around to the end of the ring if needed. + * + * We know if a wrapaound should occur if the new BdPtr is less than + * the base address in the ring OR if the new BdPtr crosses over the + * 0xFFFFFFFF to 0 boundary. The latter test is a valid one since we do not + * allow a BD space to span this boundary. + * + * @param RingPtr is the ring BdPtr appears in + * @param BdPtr on input is the starting BD position and on output is the + * final BD position + * @param NumBd is the number of BD spaces to increment + * + ****************************************************************************/ +#define XEMACPS_RING_SEEKBACK(RingPtr, BdPtr, NumBd) \ + { \ + UINTPTR Addr = (UINTPTR)(void *)(BdPtr); \ + \ + Addr -= ((RingPtr)->Separation * (NumBd)); \ + if ((Addr < (RingPtr)->BaseBdAddr) || ((UINTPTR)(void*)(BdPtr) < Addr)) \ + { \ + Addr += (RingPtr)->Length; \ + } \ + \ + (BdPtr) = (XEmacPs_Bd*)(void*)Addr; \ + } + + +/************************** Function Prototypes ******************************/ + +static void XEmacPs_BdSetRxWrap(UINTPTR BdPtr); +static void XEmacPs_BdSetTxWrap(UINTPTR BdPtr); + +/************************** Variable Definitions *****************************/ + +/*****************************************************************************/ +/** + * Using a memory segment allocated by the caller, create and setup the BD list + * for the given DMA channel. + * + * @param RingPtr is the instance to be worked on. + * @param PhysAddr is the physical base address of user memory region. + * @param VirtAddr is the virtual base address of the user memory region. If + * address translation is not being utilized, then VirtAddr should be + * equivalent to PhysAddr. + * @param Alignment governs the byte alignment of individual BDs. This function + * will enforce a minimum alignment of 4 bytes with no maximum as long + * as it is specified as a power of 2. + * @param BdCount is the number of BDs to setup in the user memory region. It + * is assumed the region is large enough to contain the BDs. + * + * @return + * + * - XST_SUCCESS if initialization was successful + * - XST_NO_FEATURE if the provided instance is a non DMA type + * channel. + * - XST_INVALID_PARAM under any of the following conditions: + * 1) PhysAddr and/or VirtAddr are not aligned to the given Alignment + * parameter. + * 2) Alignment parameter does not meet minimum requirements or is not a + * power of 2 value. + * 3) BdCount is 0. + * - XST_DMA_SG_LIST_ERROR if the memory segment containing the list spans + * over address 0x00000000 in virtual address space. + * + * @note + * Make sure to pass in the right alignment value. + *****************************************************************************/ +LONG XEmacPs_BdRingCreate(XEmacPs_BdRing * RingPtr, UINTPTR PhysAddr, + UINTPTR VirtAddr, u32 Alignment, u32 BdCount) +{ + u32 i; + UINTPTR BdVirtAddr; + UINTPTR BdPhyAddr; + UINTPTR VirtAddrLoc = VirtAddr; + + /* In case there is a failure prior to creating list, make sure the + * following attributes are 0 to prevent calls to other functions + * from doing anything. + */ + RingPtr->AllCnt = 0U; + RingPtr->FreeCnt = 0U; + RingPtr->HwCnt = 0U; + RingPtr->PreCnt = 0U; + RingPtr->PostCnt = 0U; + + /* Make sure Alignment parameter meets minimum requirements */ + if (Alignment < (u32)XEMACPS_DMABD_MINIMUM_ALIGNMENT) { + return (LONG)(XST_INVALID_PARAM); + } + + /* Make sure Alignment is a power of 2 */ + if (((Alignment - 0x00000001U) & Alignment)!=0x00000000U) { + return (LONG)(XST_INVALID_PARAM); + } + + /* Make sure PhysAddr and VirtAddr are on same Alignment */ + if (((PhysAddr % Alignment)!=(u32)0) || ((VirtAddrLoc % Alignment)!=(u32)0)) { + return (LONG)(XST_INVALID_PARAM); + } + + /* Is BdCount reasonable? */ + if (BdCount == 0x00000000U) { + return (LONG)(XST_INVALID_PARAM); + } + + /* Figure out how many bytes will be between the start of adjacent BDs */ + RingPtr->Separation = ((u32)sizeof(XEmacPs_Bd)); + + /* Must make sure the ring doesn't span address 0x00000000. If it does, + * then the next/prev BD traversal macros will fail. + */ + if (VirtAddrLoc > ((VirtAddrLoc + (RingPtr->Separation * BdCount)) - (u32)1)) { + return (LONG)(XST_DMA_SG_LIST_ERROR); + } + + /* Initial ring setup: + * - Clear the entire space + * - Setup each BD's BDA field with the physical address of the next BD + */ + (void)memset((void *) VirtAddrLoc, 0, (RingPtr->Separation * BdCount)); + + BdVirtAddr = VirtAddrLoc; + BdPhyAddr = PhysAddr + RingPtr->Separation; + for (i = 1U; i < BdCount; i++) { + BdVirtAddr += RingPtr->Separation; + BdPhyAddr += RingPtr->Separation; + } + + /* Setup and initialize pointers and counters */ + RingPtr->RunState = (u32)(XST_DMA_SG_IS_STOPPED); + RingPtr->BaseBdAddr = VirtAddrLoc; + RingPtr->PhysBaseAddr = PhysAddr; + RingPtr->HighBdAddr = BdVirtAddr; + RingPtr->Length = + ((RingPtr->HighBdAddr - RingPtr->BaseBdAddr) + RingPtr->Separation); + RingPtr->AllCnt = (u32)BdCount; + RingPtr->FreeCnt = (u32)BdCount; + RingPtr->FreeHead = (XEmacPs_Bd *)(void *)VirtAddrLoc; + RingPtr->PreHead = (XEmacPs_Bd *)VirtAddrLoc; + RingPtr->HwHead = (XEmacPs_Bd *)VirtAddrLoc; + RingPtr->HwTail = (XEmacPs_Bd *)VirtAddrLoc; + RingPtr->PostHead = (XEmacPs_Bd *)VirtAddrLoc; + RingPtr->BdaRestart = (XEmacPs_Bd *)(void *)PhysAddr; + + return (LONG)(XST_SUCCESS); +} + + +/*****************************************************************************/ +/** + * Clone the given BD into every BD in the list. + * every field of the source BD is replicated in every BD of the list. + * + * This function can be called only when all BDs are in the free group such as + * they are immediately after initialization with XEmacPs_BdRingCreate(). + * This prevents modification of BDs while they are in use by hardware or the + * user. + * + * @param RingPtr is the pointer of BD ring instance to be worked on. + * @param SrcBdPtr is the source BD template to be cloned into the list. This + * BD will be modified. + * @param Direction is either XEMACPS_SEND or XEMACPS_RECV that indicates + * which direction. + * + * @return + * - XST_SUCCESS if the list was modified. + * - XST_DMA_SG_NO_LIST if a list has not been created. + * - XST_DMA_SG_LIST_ERROR if some of the BDs in this channel are under + * hardware or user control. + * - XST_DEVICE_IS_STARTED if the DMA channel has not been stopped. + * + *****************************************************************************/ +LONG XEmacPs_BdRingClone(XEmacPs_BdRing * RingPtr, XEmacPs_Bd * SrcBdPtr, + u8 Direction) +{ + u32 i; + UINTPTR CurBd; + + /* Can't do this function if there isn't a ring */ + if (RingPtr->AllCnt == 0x00000000U) { + return (LONG)(XST_DMA_SG_NO_LIST); + } + + /* Can't do this function with the channel running */ + if (RingPtr->RunState == (u32)XST_DMA_SG_IS_STARTED) { + return (LONG)(XST_DEVICE_IS_STARTED); + } + + /* Can't do this function with some of the BDs in use */ + if (RingPtr->FreeCnt != RingPtr->AllCnt) { + return (LONG)(XST_DMA_SG_LIST_ERROR); + } + + if ((Direction != (u8)XEMACPS_SEND) && (Direction != (u8)XEMACPS_RECV)) { + return (LONG)(XST_INVALID_PARAM); + } + + /* Starting from the top of the ring, save BD.Next, overwrite the entire + * BD with the template, then restore BD.Next + */ + CurBd = RingPtr->BaseBdAddr; + for (i = 0U; i < RingPtr->AllCnt; i++) { + memcpy((void *)CurBd, SrcBdPtr, sizeof(XEmacPs_Bd)); + CurBd += RingPtr->Separation; + } + + CurBd -= RingPtr->Separation; + + if (Direction == XEMACPS_RECV) { + XEmacPs_BdSetRxWrap(CurBd); + } + else { + XEmacPs_BdSetTxWrap(CurBd); + } + + return (LONG)(XST_SUCCESS); +} + + +/*****************************************************************************/ +/** + * Reserve locations in the BD list. The set of returned BDs may be modified + * in preparation for future DMA transaction(s). Once the BDs are ready to be + * submitted to hardware, the user must call XEmacPs_BdRingToHw() in the same + * order which they were allocated here. Example: + * + * 
+ *        NumBd = 2,
+ *        Status = XEmacPs_BdRingAlloc(MyRingPtr, NumBd, &MyBdSet),
+ *
+ *        if (Status != XST_SUCCESS)
+ *        {
+ *            *Not enough BDs available for the request*
+ *        }
+ *
+ *        CurBd = MyBdSet,
+ *        for (i=0; i
+ *
+ * A more advanced use of this function may allocate multiple sets of BDs.
+ * They must be allocated and given to hardware in the correct sequence:
+ * 
+ *        * Legal *
+ *        XEmacPs_BdRingAlloc(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingToHw(MyRingPtr, NumBd1, MySet1),
+ *
+ *        * Legal *
+ *        XEmacPs_BdRingAlloc(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingAlloc(MyRingPtr, NumBd2, &MySet2),
+ *        XEmacPs_BdRingToHw(MyRingPtr, NumBd1, MySet1),
+ *        XEmacPs_BdRingToHw(MyRingPtr, NumBd2, MySet2),
+ *
+ *        * Not legal *
+ *        XEmacPs_BdRingAlloc(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingAlloc(MyRingPtr, NumBd2, &MySet2),
+ *        XEmacPs_BdRingToHw(MyRingPtr, NumBd2, MySet2),
+ *        XEmacPs_BdRingToHw(MyRingPtr, NumBd1, MySet1),
+ * 

+ *
+ * Use the API defined in xemacps_bd.h to modify individual BDs. Traversal
+ * of the BD set can be done using XEmacPs_BdRingNext() and
+ * XEmacPs_BdRingPrev().
+ *
+ * @param RingPtr is a pointer to the BD ring instance to be worked on.
+ * @param NumBd is the number of BDs to allocate
+ * @param BdSetPtr is an output parameter, it points to the first BD available
+ *        for modification.
+ *
+ * @return
+ *   - XST_SUCCESS if the requested number of BDs was returned in the BdSetPtr
+ *     parameter.
+ *   - XST_FAILURE if there were not enough free BDs to satisfy the request.
+ *
+ * @note This function should not be preempted by another XEmacPs_Bd function
+ *       call that modifies the BD space. It is the caller's responsibility to
+ *       provide a mutual exclusion mechanism.
+ *
+ * @note Do not modify more BDs than the number requested with the NumBd
+ *       parameter. Doing so will lead to data corruption and system
+ *       instability.
+ *
+ *****************************************************************************/
+LONG XEmacPs_BdRingAlloc(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			 XEmacPs_Bd ** BdSetPtr)
+{
+	LONG Status;
+	/* Enough free BDs available for the request? */
+	if (RingPtr->FreeCnt < NumBd) {
+		Status = (LONG)(XST_FAILURE);
+	} else {
+	/* Set the return argument and move FreeHead forward */
+	*BdSetPtr = RingPtr->FreeHead;
+	XEMACPS_RING_SEEKAHEAD(RingPtr, RingPtr->FreeHead, NumBd);
+	RingPtr->FreeCnt -= NumBd;
+	RingPtr->PreCnt += NumBd;
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+ * Fully or partially undo an XEmacPs_BdRingAlloc() operation. Use this
+ * function if all the BDs allocated by XEmacPs_BdRingAlloc() could not be
+ * transferred to hardware with XEmacPs_BdRingToHw().
+ *
+ * This function helps out in situations when an unrelated error occurs after
+ * BDs have been allocated but before they have been given to hardware.
+ * An example of this type of error would be an OS running out of resources.
+ *
+ * This function is not the same as XEmacPs_BdRingFree(). The Free function
+ * returns BDs to the free list after they have been processed by hardware,
+ * while UnAlloc returns them before being processed by hardware.
+ *
+ * There are two scenarios where this function can be used. Full UnAlloc or
+ * Partial UnAlloc. A Full UnAlloc means all the BDs Alloc'd will be returned:
+ *
+ * 
+ *    Status = XEmacPs_BdRingAlloc(MyRingPtr, 10, &BdPtr),
+ *        ...
+ *    if (Error)
+ *    {
+ *        Status = XEmacPs_BdRingUnAlloc(MyRingPtr, 10, &BdPtr),
+ *    }
+ * 

+ *
+ * A partial UnAlloc means some of the BDs Alloc'd will be returned:
+ *
+ * 
+ *    Status = XEmacPs_BdRingAlloc(MyRingPtr, 10, &BdPtr),
+ *    BdsLeft = 10,
+ *    CurBdPtr = BdPtr,
+ *
+ *    while (BdsLeft)
+ *    {
+ *       if (Error)
+ *       {
+ *          Status = XEmacPs_BdRingUnAlloc(MyRingPtr, BdsLeft, CurBdPtr),
+ *       }
+ *
+ *       CurBdPtr = XEmacPs_BdRingNext(MyRingPtr, CurBdPtr),
+ *       BdsLeft--,
+ *    }
+ * 

+ *
+ * A partial UnAlloc must include the last BD in the list that was Alloc'd.
+ *
+ * @param RingPtr is a pointer to the instance to be worked on.
+ * @param NumBd is the number of BDs to allocate
+ * @param BdSetPtr is an output parameter, it points to the first BD available
+ *        for modification.
+ *
+ * @return
+ *   - XST_SUCCESS if the BDs were unallocated.
+ *   - XST_FAILURE if NumBd parameter was greater that the number of BDs in
+ *     the preprocessing state.
+ *
+ * @note This function should not be preempted by another XEmacPs_Bd function
+ *       call that modifies the BD space. It is the caller's responsibility to
+ *       provide a mutual exclusion mechanism.
+ *
+ *****************************************************************************/
+LONG XEmacPs_BdRingUnAlloc(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			   XEmacPs_Bd * BdSetPtr)
+{
+	LONG Status;
+	(void *)BdSetPtr;
+	Xil_AssertNonvoid(RingPtr != NULL);
+	Xil_AssertNonvoid(BdSetPtr != NULL);
+
+	/* Enough BDs in the free state for the request? */
+	if (RingPtr->PreCnt < NumBd) {
+		Status = (LONG)(XST_FAILURE);
+	} else {
+	/* Set the return argument and move FreeHead backward */
+		XEMACPS_RING_SEEKBACK(RingPtr, (RingPtr->FreeHead), NumBd);
+	RingPtr->FreeCnt += NumBd;
+	RingPtr->PreCnt -= NumBd;
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Enqueue a set of BDs to hardware that were previously allocated by
+ * XEmacPs_BdRingAlloc(). Once this function returns, the argument BD set goes
+ * under hardware control. Any changes made to these BDs after this point will
+ * corrupt the BD list leading to data corruption and system instability.
+ *
+ * The set will be rejected if the last BD of the set does not mark the end of
+ * a packet (see XEmacPs_BdSetLast()).
+ *
+ * @param RingPtr is a pointer to the instance to be worked on.
+ * @param NumBd is the number of BDs in the set.
+ * @param BdSetPtr is the first BD of the set to commit to hardware.
+ *
+ * @return
+ *   - XST_SUCCESS if the set of BDs was accepted and enqueued to hardware.
+ *   - XST_FAILURE if the set of BDs was rejected because the last BD of the set
+ *     did not have its "last" bit set.
+ *   - XST_DMA_SG_LIST_ERROR if this function was called out of sequence with
+ *     XEmacPs_BdRingAlloc().
+ *
+ * @note This function should not be preempted by another XEmacPs_Bd function
+ *       call that modifies the BD space. It is the caller's responsibility to
+ *       provide a mutual exclusion mechanism.
+ *
+ *****************************************************************************/
+LONG XEmacPs_BdRingToHw(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			XEmacPs_Bd * BdSetPtr)
+{
+	XEmacPs_Bd *CurBdPtr;
+	u32 i;
+	LONG Status;
+	/* if no bds to process, simply return. */
+	if (0U == NumBd){
+		Status = (LONG)(XST_SUCCESS);
+	} else {
+	/* Make sure we are in sync with XEmacPs_BdRingAlloc() */
+	if ((RingPtr->PreCnt < NumBd) || (RingPtr->PreHead != BdSetPtr)) {
+			Status = (LONG)(XST_DMA_SG_LIST_ERROR);
+		} else {
+	CurBdPtr = BdSetPtr;
+			for (i = 0U; i < NumBd; i++) {
+				CurBdPtr = (XEmacPs_Bd *)((void *)XEmacPs_BdRingNext(RingPtr, CurBdPtr));
+	}
+	/* Adjust ring pointers & counters */
+	XEMACPS_RING_SEEKAHEAD(RingPtr, RingPtr->PreHead, NumBd);
+	RingPtr->PreCnt -= NumBd;
+	RingPtr->HwTail = CurBdPtr;
+	RingPtr->HwCnt += NumBd;
+
+			Status = (LONG)(XST_SUCCESS);
+		}
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Returns a set of BD(s) that have been processed by hardware. The returned
+ * BDs may be examined to determine the outcome of the DMA transaction(s).
+ * Once the BDs have been examined, the user must call XEmacPs_BdRingFree()
+ * in the same order which they were retrieved here. Example:
+ *
+ * 
+ *        NumBd = XEmacPs_BdRingFromHwTx(MyRingPtr, MaxBd, &MyBdSet),
+ *        if (NumBd == 0)
+ *        {
+ *           * hardware has nothing ready for us yet*
+ *        }
+ *
+ *        CurBd = MyBdSet,
+ *        for (i=0; i
+ *
+ * A more advanced use of this function may allocate multiple sets of BDs.
+ * They must be retrieved from hardware and freed in the correct sequence:
+ * 
+ *        * Legal *
+ *        XEmacPs_BdRingFromHwTx(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd1, MySet1),
+ *
+ *        * Legal *
+ *        XEmacPs_BdRingFromHwTx(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingFromHwTx(MyRingPtr, NumBd2, &MySet2),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd1, MySet1),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd2, MySet2),
+ *
+ *        * Not legal *
+ *        XEmacPs_BdRingFromHwTx(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingFromHwTx(MyRingPtr, NumBd2, &MySet2),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd2, MySet2),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd1, MySet1),
+ * 

+ *
+ * If hardware has only partially completed a packet spanning multiple BDs,
+ * then none of the BDs for that packet will be included in the results.
+ *
+ * @param RingPtr is a pointer to the instance to be worked on.
+ * @param BdLimit is the maximum number of BDs to return in the set.
+ * @param BdSetPtr is an output parameter, it points to the first BD available
+ *        for examination.
+ *
+ * @return
+ *   The number of BDs processed by hardware. A value of 0 indicates that no
+ *   data is available. No more than BdLimit BDs will be returned.
+ *
+ * @note Treat BDs returned by this function as read-only.
+ *
+ * @note This function should not be preempted by another XEmacPs_Bd function
+ *       call that modifies the BD space. It is the caller's responsibility to
+ *       provide a mutual exclusion mechanism.
+ *
+ *****************************************************************************/
+u32 XEmacPs_BdRingFromHwTx(XEmacPs_BdRing * RingPtr, u32 BdLimit,
+				 XEmacPs_Bd ** BdSetPtr)
+{
+	XEmacPs_Bd *CurBdPtr;
+	u32 BdStr = 0U;
+	u32 BdCount;
+	u32 BdPartialCount;
+	u32 Sop = 0U;
+	u32 Status;
+	u32 BdLimitLoc = BdLimit;
+	CurBdPtr = RingPtr->HwHead;
+	BdCount = 0U;
+	BdPartialCount = 0U;
+
+	/* If no BDs in work group, then there's nothing to search */
+	if (RingPtr->HwCnt == 0x00000000U) {
+		*BdSetPtr = NULL;
+		Status = 0U;
+	} else {
+
+		if (BdLimitLoc > RingPtr->HwCnt){
+			BdLimitLoc = RingPtr->HwCnt;
+	}
+	/* Starting at HwHead, keep moving forward in the list until:
+	 *  - A BD is encountered with its new/used bit set which means
+	 *    hardware has not completed processing of that BD.
+	 *  - RingPtr->HwTail is reached and RingPtr->HwCnt is reached.
+	 *  - The number of requested BDs has been processed
+	 */
+		while (BdCount < BdLimitLoc) {
+		/* Read the status */
+			if(CurBdPtr != NULL){
+		BdStr = XEmacPs_BdRead(CurBdPtr, XEMACPS_BD_STAT_OFFSET);
+			}
+
+			if ((Sop == 0x00000000U) && ((BdStr & XEMACPS_TXBUF_USED_MASK)!=0x00000000U)){
+				Sop = 1U;
+			}
+			if (Sop == 0x00000001U) {
+			BdCount++;
+			BdPartialCount++;
+		}
+
+		/* hardware has processed this BD so check the "last" bit.
+		 * If it is clear, then there are more BDs for the current
+		 * packet. Keep a count of these partial packet BDs.
+		 */
+			if ((Sop == 0x00000001U) && ((BdStr & XEMACPS_TXBUF_LAST_MASK)!=0x00000000U)) {
+				Sop = 0U;
+				BdPartialCount = 0U;
+		}
+
+		/* Move on to next BD in work group */
+		CurBdPtr = XEmacPs_BdRingNext(RingPtr, CurBdPtr);
+	}
+
+	/* Subtract off any partial packet BDs found */
+        BdCount -= BdPartialCount;
+
+	/* If BdCount is non-zero then BDs were found to return. Set return
+	 * parameters, update pointers and counters, return success
+	 */
+		if (BdCount > 0x00000000U) {
+		*BdSetPtr = RingPtr->HwHead;
+		RingPtr->HwCnt -= BdCount;
+		RingPtr->PostCnt += BdCount;
+		XEMACPS_RING_SEEKAHEAD(RingPtr, RingPtr->HwHead, BdCount);
+			Status = (BdCount);
+		} else {
+			*BdSetPtr = NULL;
+			Status = 0U;
+	}
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Returns a set of BD(s) that have been processed by hardware. The returned
+ * BDs may be examined to determine the outcome of the DMA transaction(s).
+ * Once the BDs have been examined, the user must call XEmacPs_BdRingFree()
+ * in the same order which they were retrieved here. Example:
+ *
+ * 
+ *        NumBd = XEmacPs_BdRingFromHwRx(MyRingPtr, MaxBd, &MyBdSet),
+ *
+ *        if (NumBd == 0)
+ *        {
+ *           *hardware has nothing ready for us yet*
+ *        }
+ *
+ *        CurBd = MyBdSet,
+ *        for (i=0; i
+ *
+ * A more advanced use of this function may allocate multiple sets of BDs.
+ * They must be retrieved from hardware and freed in the correct sequence:
+ * 
+ *        * Legal *
+ *        XEmacPs_BdRingFromHwRx(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd1, MySet1),
+ *
+ *        * Legal *
+ *        XEmacPs_BdRingFromHwRx(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingFromHwRx(MyRingPtr, NumBd2, &MySet2),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd1, MySet1),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd2, MySet2),
+ *
+ *        * Not legal *
+ *        XEmacPs_BdRingFromHwRx(MyRingPtr, NumBd1, &MySet1),
+ *        XEmacPs_BdRingFromHwRx(MyRingPtr, NumBd2, &MySet2),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd2, MySet2),
+ *        XEmacPs_BdRingFree(MyRingPtr, NumBd1, MySet1),
+ * 

+ *
+ * If hardware has only partially completed a packet spanning multiple BDs,
+ * then none of the BDs for that packet will be included in the results.
+ *
+ * @param RingPtr is a pointer to the instance to be worked on.
+ * @param BdLimit is the maximum number of BDs to return in the set.
+ * @param BdSetPtr is an output parameter, it points to the first BD available
+ *        for examination.
+ *
+ * @return
+ *   The number of BDs processed by hardware. A value of 0 indicates that no
+ *   data is available. No more than BdLimit BDs will be returned.
+ *
+ * @note Treat BDs returned by this function as read-only.
+ *
+ * @note This function should not be preempted by another XEmacPs_Bd function
+ *       call that modifies the BD space. It is the caller's responsibility to
+ *       provide a mutual exclusion mechanism.
+ *
+ *****************************************************************************/
+u32 XEmacPs_BdRingFromHwRx(XEmacPs_BdRing * RingPtr, u32 BdLimit,
+				 XEmacPs_Bd ** BdSetPtr)
+{
+	XEmacPs_Bd *CurBdPtr;
+	u32 BdStr = 0U;
+	u32 BdCount;
+	u32 BdPartialCount;
+	u32 Status;
+
+	CurBdPtr = RingPtr->HwHead;
+	BdCount = 0U;
+	BdPartialCount = 0U;
+
+	/* If no BDs in work group, then there's nothing to search */
+	if (RingPtr->HwCnt == 0x00000000U) {
+		*BdSetPtr = NULL;
+		Status = 0U;
+	} else {
+
+	/* Starting at HwHead, keep moving forward in the list until:
+	 *  - A BD is encountered with its new/used bit set which means
+	 *    hardware has completed processing of that BD.
+	 *  - RingPtr->HwTail is reached and RingPtr->HwCnt is reached.
+	 *  - The number of requested BDs has been processed
+	 */
+	while (BdCount < BdLimit) {
+
+		/* Read the status */
+			if(CurBdPtr!=NULL){
+		BdStr = XEmacPs_BdRead(CurBdPtr, XEMACPS_BD_STAT_OFFSET);
+			}
+			if ((!(XEmacPs_BdIsRxNew(CurBdPtr)))==TRUE) {
+			break;
+		}
+
+		BdCount++;
+
+		/* hardware has processed this BD so check the "last" bit. If
+                 * it is clear, then there are more BDs for the current packet.
+                 * Keep a count of these partial packet BDs.
+		 */
+			if ((BdStr & XEMACPS_RXBUF_EOF_MASK)!=0x00000000U) {
+				BdPartialCount = 0U;
+			} else {
+			BdPartialCount++;
+		}
+
+		/* Move on to next BD in work group */
+		CurBdPtr = XEmacPs_BdRingNext(RingPtr, CurBdPtr);
+	}
+
+	/* Subtract off any partial packet BDs found */
+	BdCount -= BdPartialCount;
+
+	/* If BdCount is non-zero then BDs were found to return. Set return
+	 * parameters, update pointers and counters, return success
+	 */
+		if (BdCount > 0x00000000U) {
+		*BdSetPtr = RingPtr->HwHead;
+		RingPtr->HwCnt -= BdCount;
+		RingPtr->PostCnt += BdCount;
+		XEMACPS_RING_SEEKAHEAD(RingPtr, RingPtr->HwHead, BdCount);
+			Status = (BdCount);
+	}
+	else {
+		*BdSetPtr = NULL;
+			Status = 0U;
+	}
+}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Frees a set of BDs that had been previously retrieved with
+ * XEmacPs_BdRingFromHw().
+ *
+ * @param RingPtr is a pointer to the instance to be worked on.
+ * @param NumBd is the number of BDs to free.
+ * @param BdSetPtr is the head of a list of BDs returned by
+ * XEmacPs_BdRingFromHw().
+ *
+ * @return
+ *   - XST_SUCCESS if the set of BDs was freed.
+ *   - XST_DMA_SG_LIST_ERROR if this function was called out of sequence with
+ *     XEmacPs_BdRingFromHw().
+ *
+ * @note This function should not be preempted by another XEmacPs_Bd function
+ *       call that modifies the BD space. It is the caller's responsibility to
+ *       provide a mutual exclusion mechanism.
+ *
+ *****************************************************************************/
+LONG XEmacPs_BdRingFree(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			XEmacPs_Bd * BdSetPtr)
+{
+	LONG Status;
+	/* if no bds to process, simply return. */
+	if (0x00000000U == NumBd){
+		Status = (LONG)(XST_SUCCESS);
+	} else {
+	/* Make sure we are in sync with XEmacPs_BdRingFromHw() */
+	if ((RingPtr->PostCnt < NumBd) || (RingPtr->PostHead != BdSetPtr)) {
+			Status = (LONG)(XST_DMA_SG_LIST_ERROR);
+		} else {
+	/* Update pointers and counters */
+	RingPtr->FreeCnt += NumBd;
+	RingPtr->PostCnt -= NumBd;
+	XEMACPS_RING_SEEKAHEAD(RingPtr, RingPtr->PostHead, NumBd);
+			Status = (LONG)(XST_SUCCESS);
+		}
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Check the internal data structures of the BD ring for the provided channel.
+ * The following checks are made:
+ *
+ *   - Is the BD ring linked correctly in physical address space.
+ *   - Do the internal pointers point to BDs in the ring.
+ *   - Do the internal counters add up.
+ *
+ * The channel should be stopped prior to calling this function.
+ *
+ * @param RingPtr is a pointer to the instance to be worked on.
+ * @param Direction is either XEMACPS_SEND or XEMACPS_RECV that indicates
+ *        which direction.
+ *
+ * @return
+ *   - XST_SUCCESS if the set of BDs was freed.
+ *   - XST_DMA_SG_NO_LIST if the list has not been created.
+ *   - XST_IS_STARTED if the channel is not stopped.
+ *   - XST_DMA_SG_LIST_ERROR if a problem is found with the internal data
+ *     structures. If this value is returned, the channel should be reset to
+ *     avoid data corruption or system instability.
+ *
+ * @note This function should not be preempted by another XEmacPs_Bd function
+ *       call that modifies the BD space. It is the caller's responsibility to
+ *       provide a mutual exclusion mechanism.
+ *
+ *****************************************************************************/
+LONG XEmacPs_BdRingCheck(XEmacPs_BdRing * RingPtr, u8 Direction)
+{
+	UINTPTR AddrV, AddrP;
+	u32 i;
+
+	if ((Direction != (u8)XEMACPS_SEND) && (Direction != (u8)XEMACPS_RECV)) {
+		return (LONG)(XST_INVALID_PARAM);
+	}
+
+	/* Is the list created */
+	if (RingPtr->AllCnt == 0x00000000U) {
+		return (LONG)(XST_DMA_SG_NO_LIST);
+	}
+
+	/* Can't check if channel is running */
+	if (RingPtr->RunState == (u32)XST_DMA_SG_IS_STARTED) {
+		return (LONG)(XST_IS_STARTED);
+	}
+
+	/* RunState doesn't make sense */
+	if (RingPtr->RunState != (u32)XST_DMA_SG_IS_STOPPED) {
+		return (LONG)(XST_DMA_SG_LIST_ERROR);
+	}
+
+	/* Verify internal pointers point to correct memory space */
+	AddrV = (UINTPTR) RingPtr->FreeHead;
+	if ((AddrV < RingPtr->BaseBdAddr) || (AddrV > RingPtr->HighBdAddr)) {
+		return (LONG)(XST_DMA_SG_LIST_ERROR);
+	}
+
+	AddrV = (UINTPTR) RingPtr->PreHead;
+	if ((AddrV < RingPtr->BaseBdAddr) || (AddrV > RingPtr->HighBdAddr)) {
+		return (LONG)(XST_DMA_SG_LIST_ERROR);
+	}
+
+	AddrV = (UINTPTR) RingPtr->HwHead;
+	if ((AddrV < RingPtr->BaseBdAddr) || (AddrV > RingPtr->HighBdAddr)) {
+		return (LONG)(XST_DMA_SG_LIST_ERROR);
+	}
+
+	AddrV = (UINTPTR) RingPtr->HwTail;
+	if ((AddrV < RingPtr->BaseBdAddr) || (AddrV > RingPtr->HighBdAddr)) {
+		return (LONG)(XST_DMA_SG_LIST_ERROR);
+	}
+
+	AddrV = (UINTPTR) RingPtr->PostHead;
+	if ((AddrV < RingPtr->BaseBdAddr) || (AddrV > RingPtr->HighBdAddr)) {
+		return (LONG)(XST_DMA_SG_LIST_ERROR);
+	}
+
+	/* Verify internal counters add up */
+	if ((RingPtr->HwCnt + RingPtr->PreCnt + RingPtr->FreeCnt +
+	     RingPtr->PostCnt) != RingPtr->AllCnt) {
+		return (LONG)(XST_DMA_SG_LIST_ERROR);
+	}
+
+	/* Verify BDs are linked correctly */
+	AddrV = RingPtr->BaseBdAddr;
+	AddrP = RingPtr->PhysBaseAddr + RingPtr->Separation;
+
+	for (i = 1U; i < RingPtr->AllCnt; i++) {
+		/* Check BDA for this BD. It should point to next physical addr */
+		if (XEmacPs_BdRead(AddrV, XEMACPS_BD_ADDR_OFFSET) != AddrP) {
+			return (LONG)(XST_DMA_SG_LIST_ERROR);
+		}
+
+		/* Move on to next BD */
+		AddrV += RingPtr->Separation;
+		AddrP += RingPtr->Separation;
+	}
+
+	/* Last BD should have wrap bit set */
+	if (XEMACPS_SEND == Direction) {
+		if ((!XEmacPs_BdIsTxWrap(AddrV))==TRUE) {
+			return (LONG)(XST_DMA_SG_LIST_ERROR);
+		}
+	}
+	else {			/* XEMACPS_RECV */
+		if ((!XEmacPs_BdIsRxWrap(AddrV))==TRUE) {
+			return (LONG)(XST_DMA_SG_LIST_ERROR);
+		}
+	}
+
+	/* No problems found */
+	return (LONG)(XST_SUCCESS);
+}
+
+/*****************************************************************************/
+/**
+ * Set this bit to mark the last descriptor in the receive buffer descriptor
+ * list.
+ *
+ * @param  BdPtr is the BD pointer to operate on
+ *
+ * @note
+ * C-style signature:
+ *    void XEmacPs_BdSetRxWrap(XEmacPs_Bd* BdPtr)
+ *
+ *****************************************************************************/
+static void XEmacPs_BdSetRxWrap(UINTPTR BdPtr)
+{
+    u32 DataValueRx;
+	u32 *TempPtr;
+
+	BdPtr += (u32)(XEMACPS_BD_ADDR_OFFSET);
+	TempPtr = (u32 *)BdPtr;
+	if(TempPtr != NULL) {
+		DataValueRx = *TempPtr;
+		DataValueRx |= XEMACPS_RXBUF_WRAP_MASK;
+		*TempPtr = DataValueRx;
+	}
+}
+
+/*****************************************************************************/
+/**
+ * Sets this bit to mark the last descriptor in the transmit buffer
+ * descriptor list.
+ *
+ * @param  BdPtr is the BD pointer to operate on
+ *
+ * @note
+ * C-style signature:
+ *    void XEmacPs_BdSetTxWrap(XEmacPs_Bd* BdPtr)
+ *
+ *****************************************************************************/
+static void XEmacPs_BdSetTxWrap(UINTPTR BdPtr)
+{
+    u32 DataValueTx;
+	u32 *TempPtr;
+
+	BdPtr += (u32)(XEMACPS_BD_STAT_OFFSET);
+	TempPtr = (u32 *)BdPtr;
+	if(TempPtr != NULL) {
+		DataValueTx = *TempPtr;
+		DataValueTx |= XEMACPS_TXBUF_WRAP_MASK;
+		*TempPtr = DataValueTx;
+	}
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bdring.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bdring.h
new file mode 100644
index 000000000..de78cf28f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_bdring.h
@@ -0,0 +1,238 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemacps_bdring.h
+* @addtogroup emacps_v3_1
+* @{
+*
+* The Xiline EmacPs Buffer Descriptor ring driver. This is part of EmacPs
+* DMA functionalities.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release
+* 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp architecture.
+* 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* 

+*
+******************************************************************************/
+
+#ifndef XEMACPS_BDRING_H	/* prevent curcular inclusions */
+#define XEMACPS_BDRING_H	/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**************************** Type Definitions *******************************/
+
+/** This is an internal structure used to maintain the DMA list */
+typedef struct {
+	UINTPTR PhysBaseAddr;/**< Physical address of 1st BD in list */
+	UINTPTR BaseBdAddr;	 /**< Virtual address of 1st BD in list */
+	UINTPTR HighBdAddr;	 /**< Virtual address of last BD in the list */
+	u32 Length;	 /**< Total size of ring in bytes */
+	u32 RunState;	 /**< Flag to indicate DMA is started */
+	u32 Separation;	 /**< Number of bytes between the starting address
+                                  of adjacent BDs */
+	XEmacPs_Bd *FreeHead;
+			     /**< First BD in the free group */
+	XEmacPs_Bd *PreHead;/**< First BD in the pre-work group */
+	XEmacPs_Bd *HwHead; /**< First BD in the work group */
+	XEmacPs_Bd *HwTail; /**< Last BD in the work group */
+	XEmacPs_Bd *PostHead;
+			     /**< First BD in the post-work group */
+	XEmacPs_Bd *BdaRestart;
+			     /**< BDA to load when channel is started */
+
+	u32 HwCnt;	     /**< Number of BDs in work group */
+	u32 PreCnt;     /**< Number of BDs in pre-work group */
+	u32 FreeCnt;    /**< Number of allocatable BDs in the free group */
+	u32 PostCnt;    /**< Number of BDs in post-work group */
+	u32 AllCnt;     /**< Total Number of BDs for channel */
+} XEmacPs_BdRing;
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/**
+* Use this macro at initialization time to determine how many BDs will fit
+* in a BD list within the given memory constraints.
+*
+* The results of this macro can be provided to XEmacPs_BdRingCreate().
+*
+* @param Alignment specifies what byte alignment the BDs must fall on and
+*        must be a power of 2 to get an accurate calculation (32, 64, 128,...)
+* @param Bytes is the number of bytes to be used to store BDs.
+*
+* @return Number of BDs that can fit in the given memory area
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingCntCalc(u32 Alignment, u32 Bytes)
+*
+******************************************************************************/
+#define XEmacPs_BdRingCntCalc(Alignment, Bytes)                    \
+    (u32)((Bytes) / (sizeof(XEmacPs_Bd)))
+
+/*****************************************************************************/
+/**
+* Use this macro at initialization time to determine how many bytes of memory
+* is required to contain a given number of BDs at a given alignment.
+*
+* @param Alignment specifies what byte alignment the BDs must fall on. This
+*        parameter must be a power of 2 to get an accurate calculation (32, 64,
+*        128,...)
+* @param NumBd is the number of BDs to calculate memory size requirements for
+*
+* @return The number of bytes of memory required to create a BD list with the
+*         given memory constraints.
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingMemCalc(u32 Alignment, u32 NumBd)
+*
+******************************************************************************/
+#define XEmacPs_BdRingMemCalc(Alignment, NumBd)                    \
+    (u32)(sizeof(XEmacPs_Bd) * (NumBd))
+
+/****************************************************************************/
+/**
+* Return the total number of BDs allocated by this channel with
+* XEmacPs_BdRingCreate().
+*
+* @param  RingPtr is the DMA channel to operate on.
+*
+* @return The total number of BDs allocated for this channel.
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingGetCnt(XEmacPs_BdRing* RingPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingGetCnt(RingPtr) ((RingPtr)->AllCnt)
+
+/****************************************************************************/
+/**
+* Return the number of BDs allocatable with XEmacPs_BdRingAlloc() for pre-
+* processing.
+*
+* @param  RingPtr is the DMA channel to operate on.
+*
+* @return The number of BDs currently allocatable.
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_BdRingGetFreeCnt(XEmacPs_BdRing* RingPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingGetFreeCnt(RingPtr)   ((RingPtr)->FreeCnt)
+
+/****************************************************************************/
+/**
+* Return the next BD from BdPtr in a list.
+*
+* @param  RingPtr is the DMA channel to operate on.
+* @param  BdPtr is the BD to operate on.
+*
+* @return The next BD in the list relative to the BdPtr parameter.
+*
+* @note
+* C-style signature:
+*    XEmacPs_Bd *XEmacPs_BdRingNext(XEmacPs_BdRing* RingPtr,
+*                                      XEmacPs_Bd *BdPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingNext(RingPtr, BdPtr)                           \
+    (((UINTPTR)((void *)(BdPtr)) >= (RingPtr)->HighBdAddr) ?                     \
+    (XEmacPs_Bd*)((void*)(RingPtr)->BaseBdAddr) :                              \
+    (XEmacPs_Bd*)((UINTPTR)((void *)(BdPtr)) + (RingPtr)->Separation))
+
+/****************************************************************************/
+/**
+* Return the previous BD from BdPtr in the list.
+*
+* @param  RingPtr is the DMA channel to operate on.
+* @param  BdPtr is the BD to operate on
+*
+* @return The previous BD in the list relative to the BdPtr parameter.
+*
+* @note
+* C-style signature:
+*    XEmacPs_Bd *XEmacPs_BdRingPrev(XEmacPs_BdRing* RingPtr,
+*                                      XEmacPs_Bd *BdPtr)
+*
+*****************************************************************************/
+#define XEmacPs_BdRingPrev(RingPtr, BdPtr)                           \
+    (((UINTPTR)(BdPtr) <= (RingPtr)->BaseBdAddr) ?                     \
+    (XEmacPs_Bd*)(RingPtr)->HighBdAddr :                              \
+    (XEmacPs_Bd*)((UINTPTR)(BdPtr) - (RingPtr)->Separation))
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Scatter gather DMA related functions in xemacps_bdring.c
+ */
+LONG XEmacPs_BdRingCreate(XEmacPs_BdRing * RingPtr, UINTPTR PhysAddr,
+			  UINTPTR VirtAddr, u32 Alignment, u32 BdCount);
+LONG XEmacPs_BdRingClone(XEmacPs_BdRing * RingPtr, XEmacPs_Bd * SrcBdPtr,
+			 u8 Direction);
+LONG XEmacPs_BdRingAlloc(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			 XEmacPs_Bd ** BdSetPtr);
+LONG XEmacPs_BdRingUnAlloc(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			   XEmacPs_Bd * BdSetPtr);
+LONG XEmacPs_BdRingToHw(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			XEmacPs_Bd * BdSetPtr);
+LONG XEmacPs_BdRingFree(XEmacPs_BdRing * RingPtr, u32 NumBd,
+			XEmacPs_Bd * BdSetPtr);
+u32 XEmacPs_BdRingFromHwTx(XEmacPs_BdRing * RingPtr, u32 BdLimit,
+				 XEmacPs_Bd ** BdSetPtr);
+u32 XEmacPs_BdRingFromHwRx(XEmacPs_BdRing * RingPtr, u32 BdLimit,
+				 XEmacPs_Bd ** BdSetPtr);
+LONG XEmacPs_BdRingCheck(XEmacPs_BdRing * RingPtr, u8 Direction);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* end of protection macros */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_control.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_control.c
new file mode 100644
index 000000000..f52451a8c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_control.c
@@ -0,0 +1,1174 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+ *
+ * @file xemacps_control.c
+* @addtogroup emacps_v3_1
+* @{
+ *
+ * Functions in this file implement general purpose command and control related
+ * functionality. See xemacps.h for a detailed description of the driver.
+ *
+ * 
+ * MODIFICATION HISTORY:
+ *
+ * Ver   Who  Date     Changes
+ * ----- ---- -------- -------------------------------------------------------
+ * 1.00a wsy  01/10/10 First release
+ * 1.02a asa  11/05/12 Added a new API for deleting an entry from the HASH
+ *					   register. Added a new API for setting the BURST length
+ *					   in DMACR register.
+ * 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp architecture.
+ * 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+ * 3.0   hk   02/20/15 Added support for jumbo frames.
+ * 3.2   hk   02/22/16 Added SGMII support for Zynq Ultrascale+ MPSoC.
+ * 

+ *****************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+ * Set the MAC address for this driver/device.  The address is a 48-bit value.
+ * The device must be stopped before calling this function.
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param AddressPtr is a pointer to a 6-byte MAC address.
+ * @param Index is a index to which MAC (1-4) address.
+ *
+ * @return
+ * - XST_SUCCESS if the MAC address was set successfully
+ * - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+ *
+ *****************************************************************************/
+LONG XEmacPs_SetMacAddress(XEmacPs *InstancePtr, void *AddressPtr, u8 Index)
+{
+	u32 MacAddr;
+	u8 *Aptr = (u8 *)(void *)AddressPtr;
+	u8 IndexLoc = Index;
+	LONG Status;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(Aptr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((IndexLoc <= (u8)XEMACPS_MAX_MAC_ADDR) && (IndexLoc > 0x00U));
+
+	/* Be sure device has been stopped */
+	if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) {
+		Status = (LONG)(XST_DEVICE_IS_STARTED);
+	}
+	else{
+	/* Index ranges 1 to 4, for offset calculation is 0 to 3. */
+		IndexLoc--;
+
+	/* Set the MAC bits [31:0] in BOT */
+		MacAddr = *(Aptr);
+		MacAddr |= ((u32)(*(Aptr+1)) << 8U);
+		MacAddr |= ((u32)(*(Aptr+2)) << 16U);
+		MacAddr |= ((u32)(*(Aptr+3)) << 24U);
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				((u32)XEMACPS_LADDR1L_OFFSET + ((u32)IndexLoc * (u32)8)), MacAddr);
+
+	/* There are reserved bits in TOP so don't affect them */
+	MacAddr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					((u32)XEMACPS_LADDR1H_OFFSET + ((u32)IndexLoc * (u32)8)));
+
+		MacAddr &= (u32)(~XEMACPS_LADDR_MACH_MASK);
+
+	/* Set MAC bits [47:32] in TOP */
+		MacAddr |= (u32)(*(Aptr+4));
+		MacAddr |= (u32)(*(Aptr+5)) << 8U;
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				((u32)XEMACPS_LADDR1H_OFFSET + ((u32)IndexLoc * (u32)8)), MacAddr);
+
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Get the MAC address for this driver/device.
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param AddressPtr is an output parameter, and is a pointer to a buffer into
+ *        which the current MAC address will be copied.
+ * @param Index is a index to which MAC (1-4) address.
+ *
+ *****************************************************************************/
+void XEmacPs_GetMacAddress(XEmacPs *InstancePtr, void *AddressPtr, u8 Index)
+{
+	u32 MacAddr;
+	u8 *Aptr = (u8 *)(void *)AddressPtr;
+	u8 IndexLoc = Index;
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Aptr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((IndexLoc <= (u8)XEMACPS_MAX_MAC_ADDR) && (IndexLoc > 0x00U));
+
+	/* Index ranges 1 to 4, for offset calculation is 0 to 3. */
+	IndexLoc--;
+
+	MacAddr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				    ((u32)XEMACPS_LADDR1L_OFFSET + ((u32)IndexLoc * (u32)8)));
+	*Aptr = (u8) MacAddr;
+	*(Aptr+1) = (u8) (MacAddr >> 8U);
+	*(Aptr+2) = (u8) (MacAddr >> 16U);
+	*(Aptr+3) = (u8) (MacAddr >> 24U);
+
+	/* Read MAC bits [47:32] in TOP */
+	MacAddr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				    ((u32)XEMACPS_LADDR1H_OFFSET + ((u32)IndexLoc * (u32)8)));
+	*(Aptr+4) = (u8) MacAddr;
+	*(Aptr+5) = (u8) (MacAddr >> 8U);
+}
+
+
+/*****************************************************************************/
+/**
+ * Set 48-bit MAC addresses in hash table.
+ * The device must be stopped before calling this function.
+ *
+ * The hash address register is 64 bits long and takes up two locations in
+ * the memory map. The least significant bits are stored in hash register
+ * bottom and the most significant bits in hash register top.
+ *
+ * The unicast hash enable and the multicast hash enable bits in the network
+ * configuration register enable the reception of hash matched frames. The
+ * destination address is reduced to a 6 bit index into the 64 bit hash
+ * register using the following hash function. The hash function is an XOR
+ * of every sixth bit of the destination address.
+ *
+ * 
+ * hash_index[05] = da[05]^da[11]^da[17]^da[23]^da[29]^da[35]^da[41]^da[47]
+ * hash_index[04] = da[04]^da[10]^da[16]^da[22]^da[28]^da[34]^da[40]^da[46]
+ * hash_index[03] = da[03]^da[09]^da[15]^da[21]^da[27]^da[33]^da[39]^da[45]
+ * hash_index[02] = da[02]^da[08]^da[14]^da[20]^da[26]^da[32]^da[38]^da[44]
+ * hash_index[01] = da[01]^da[07]^da[13]^da[19]^da[25]^da[31]^da[37]^da[43]
+ * hash_index[00] = da[00]^da[06]^da[12]^da[18]^da[24]^da[30]^da[36]^da[42]
+ * 

+ *
+ * da[0] represents the least significant bit of the first byte received,
+ * that is, the multicast/unicast indicator, and da[47] represents the most
+ * significant bit of the last byte received.
+ *
+ * If the hash index points to a bit that is set in the hash register then
+ * the frame will be matched according to whether the frame is multicast
+ * or unicast.
+ *
+ * A multicast match will be signaled if the multicast hash enable bit is
+ * set, da[0] is logic 1 and the hash index points to a bit set in the hash
+ * register.
+ *
+ * A unicast match will be signaled if the unicast hash enable bit is set,
+ * da[0] is logic 0 and the hash index points to a bit set in the hash
+ * register.
+ *
+ * To receive all multicast frames, the hash register should be set with
+ * all ones and the multicast hash enable bit should be set in the network
+ * configuration register.
+ *
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param AddressPtr is a pointer to a 6-byte MAC address.
+ *
+ * @return
+ * - XST_SUCCESS if the HASH MAC address was set successfully
+ * - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+ * - XST_INVALID_PARAM if the HASH MAC address passed in does not meet
+ *   requirement after calculation
+ *
+ * @note
+ * Having Aptr be unsigned type prevents the following operations from sign
+ * extending.
+ *****************************************************************************/
+LONG XEmacPs_SetHash(XEmacPs *InstancePtr, void *AddressPtr)
+{
+	u32 HashAddr;
+	u8 *Aptr = (u8 *)(void *)AddressPtr;
+	u8 Temp1, Temp2, Temp3, Temp4, Temp5, Temp6, Temp7, Temp8;
+	u32 Result;
+	LONG Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(AddressPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* Be sure device has been stopped */
+	if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) {
+		Status = (LONG)(XST_DEVICE_IS_STARTED);
+	} else {
+		Temp1 = (*(Aptr+0)) & 0x3FU;
+		Temp2 = ((*(Aptr+0) >> 6U) & 0x03U) | ((*(Aptr+1) & 0x0FU) << 2U);
+
+		Temp3 = ((*(Aptr+1) >> 4U) & 0x0FU) | ((*(Aptr+2) & 0x3U) << 4U);
+		Temp4 = ((*(Aptr+2) >> 2U) & 0x3FU);
+		Temp5 =   (*(Aptr+3)) & 0x3FU;
+		Temp6 = ((*(Aptr+3) >> 6U) & 0x03U) | ((*(Aptr+4) & 0x0FU) << 2U);
+		Temp7 = ((*(Aptr+4) >> 4U) & 0x0FU) | ((*(Aptr+5) & 0x03U) << 4U);
+		Temp8 = ((*(Aptr+5) >> 2U) & 0x3FU);
+
+		Result = (u32)((u32)Temp1 ^ (u32)Temp2 ^ (u32)Temp3 ^ (u32)Temp4 ^
+				(u32)Temp5 ^ (u32)Temp6 ^ (u32)Temp7 ^ (u32)Temp8);
+
+		if (Result >= (u32)XEMACPS_MAX_HASH_BITS) {
+			Status = (LONG)(XST_INVALID_PARAM);
+		} else {
+
+			if (Result < (u32)32) {
+		HashAddr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_HASHL_OFFSET);
+				HashAddr |= (u32)(0x00000001U << Result);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_HASHL_OFFSET, HashAddr);
+	} else {
+		HashAddr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_HASHH_OFFSET);
+				HashAddr |= (u32)(0x00000001U << (u32)(Result - (u32)32));
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_HASHH_OFFSET, HashAddr);
+	}
+			Status = (LONG)(XST_SUCCESS);
+		}
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+ * Delete 48-bit MAC addresses in hash table.
+ * The device must be stopped before calling this function.
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param AddressPtr is a pointer to a 6-byte MAC address.
+ *
+ * @return
+ * - XST_SUCCESS if the HASH MAC address was deleted successfully
+ * - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+ * - XST_INVALID_PARAM if the HASH MAC address passed in does not meet
+ *   requirement after calculation
+ *
+ * @note
+ * Having Aptr be unsigned type prevents the following operations from sign
+ * extending.
+ *****************************************************************************/
+LONG XEmacPs_DeleteHash(XEmacPs *InstancePtr, void *AddressPtr)
+{
+	u32 HashAddr;
+	u8 *Aptr = (u8 *)(void *)AddressPtr;
+	u8 Temp1, Temp2, Temp3, Temp4, Temp5, Temp6, Temp7, Temp8;
+	u32 Result;
+	LONG Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(Aptr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* Be sure device has been stopped */
+	if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) {
+		Status = (LONG)(XST_DEVICE_IS_STARTED);
+	} else {
+		Temp1 = (*(Aptr+0)) & 0x3FU;
+		Temp2 = ((*(Aptr+0) >> 6U) & 0x03U) | ((*(Aptr+1) & 0x0FU) << 2U);
+		Temp3 = ((*(Aptr+1) >> 4U) & 0x0FU) | ((*(Aptr+2) & 0x03U) << 4U);
+		Temp4 = ((*(Aptr+2) >> 2U) & 0x3FU);
+		Temp5 =   (*(Aptr+3)) & 0x3FU;
+		Temp6 = ((*(Aptr+3) >> 6U) & 0x03U) | ((*(Aptr+4) & 0x0FU) << 2U);
+		Temp7 = ((*(Aptr+4) >> 4U) & 0x0FU) | ((*(Aptr+5) & 0x03U) << 4U);
+		Temp8 = ((*(Aptr+5) >> 2U) & 0x3FU);
+
+		Result = (u32)((u32)Temp1 ^ (u32)Temp2 ^ (u32)Temp3 ^ (u32)Temp4 ^
+					(u32)Temp5 ^ (u32)Temp6 ^ (u32)Temp7 ^ (u32)Temp8);
+
+		if (Result >= (u32)(XEMACPS_MAX_HASH_BITS)) {
+			Status =  (LONG)(XST_INVALID_PARAM);
+		} else {
+			if (Result < (u32)32) {
+		HashAddr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_HASHL_OFFSET);
+				HashAddr &= (u32)(~(0x00000001U << Result));
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_HASHL_OFFSET, HashAddr);
+	} else {
+		HashAddr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_HASHH_OFFSET);
+				HashAddr &= (u32)(~(0x00000001U << (u32)(Result - (u32)32)));
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_HASHH_OFFSET, HashAddr);
+	}
+			Status = (LONG)(XST_SUCCESS);
+		}
+	}
+	return Status;
+}
+/*****************************************************************************/
+/**
+ * Clear the Hash registers for the mac address pointed by AddressPtr.
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ *
+ *****************************************************************************/
+void XEmacPs_ClearHash(XEmacPs *InstancePtr)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				    XEMACPS_HASHL_OFFSET, 0x0U);
+
+	/* write bits [63:32] in TOP */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				    XEMACPS_HASHH_OFFSET, 0x0U);
+}
+
+
+/*****************************************************************************/
+/**
+ * Get the Hash address for this driver/device.
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param AddressPtr is an output parameter, and is a pointer to a buffer into
+ *        which the current HASH MAC address will be copied.
+ *
+ *****************************************************************************/
+void XEmacPs_GetHash(XEmacPs *InstancePtr, void *AddressPtr)
+{
+	u32 *Aptr = (u32 *)(void *)AddressPtr;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(AddressPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	*(Aptr+0) = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				    XEMACPS_HASHL_OFFSET);
+
+	/* Read Hash bits [63:32] in TOP */
+	*(Aptr+1) = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				    XEMACPS_HASHH_OFFSET);
+}
+
+
+/*****************************************************************************/
+/**
+ * Set the Type ID match for this driver/device.  The register is a 32-bit
+ * value. The device must be stopped before calling this function.
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param Id_Check is type ID to be configured.
+ * @param Index is a index to which Type ID (1-4).
+ *
+ * @return
+ * - XST_SUCCESS if the MAC address was set successfully
+ * - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+ *
+ *****************************************************************************/
+LONG XEmacPs_SetTypeIdCheck(XEmacPs *InstancePtr, u32 Id_Check, u8 Index)
+{
+	u8 IndexLoc = Index;
+	LONG Status;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((IndexLoc <= (u8)XEMACPS_MAX_TYPE_ID) && (IndexLoc > 0x00U));
+
+	/* Be sure device has been stopped */
+	if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) {
+		Status = (LONG)(XST_DEVICE_IS_STARTED);
+	} else {
+
+	/* Index ranges 1 to 4, for offset calculation is 0 to 3. */
+		IndexLoc--;
+
+	/* Set the ID bits in MATCHx register */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   ((u32)XEMACPS_MATCH1_OFFSET + ((u32)IndexLoc * (u32)4)), Id_Check);
+
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+ * Set options for the driver/device. The driver should be stopped with
+ * XEmacPs_Stop() before changing options.
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param Options are the options to set. Multiple options can be set by OR'ing
+ *        XTE_*_OPTIONS constants together. Options not specified are not
+ *        affected.
+ *
+ * @return
+ * - XST_SUCCESS if the options were set successfully
+ * - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+ *
+ * @note
+ * See xemacps.h for a description of the available options.
+ *
+ *****************************************************************************/
+LONG XEmacPs_SetOptions(XEmacPs *InstancePtr, u32 Options)
+{
+	u32 Reg;		/* Generic register contents */
+	u32 RegNetCfg;		/* Reflects original contents of NET_CONFIG */
+	u32 RegNewNetCfg;	/* Reflects new contents of NET_CONFIG */
+	LONG Status;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* Be sure device has been stopped */
+	if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) {
+		Status = (LONG)(XST_DEVICE_IS_STARTED);
+	} else {
+
+	/* Many of these options will change the NET_CONFIG registers.
+	 * To reduce the amount of IO to the device, group these options here
+	 * and change them all at once.
+	 */
+
+	/* Grab current register contents */
+	RegNetCfg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				      XEMACPS_NWCFG_OFFSET);
+	RegNewNetCfg = RegNetCfg;
+
+	/*
+	 * It is configured to max 1536.
+	 */
+		if ((Options & XEMACPS_FRAME1536_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= (XEMACPS_NWCFG_1536RXEN_MASK);
+	}
+
+	/* Turn on VLAN packet only, only VLAN tagged will be accepted */
+		if ((Options & XEMACPS_VLAN_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= XEMACPS_NWCFG_NVLANDISC_MASK;
+	}
+
+	/* Turn on FCS stripping on receive packets */
+		if ((Options & XEMACPS_FCS_STRIP_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= XEMACPS_NWCFG_FCSREM_MASK;
+	}
+
+	/* Turn on length/type field checking on receive packets */
+		if ((Options & XEMACPS_LENTYPE_ERR_OPTION) != 0x00000000U) {
+			RegNewNetCfg |= XEMACPS_NWCFG_LENERRDSCRD_MASK;
+	}
+
+	/* Turn on flow control */
+		if ((Options & XEMACPS_FLOW_CONTROL_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= XEMACPS_NWCFG_PAUSEEN_MASK;
+	}
+
+	/* Turn on promiscuous frame filtering (all frames are received) */
+		if ((Options & XEMACPS_PROMISC_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= XEMACPS_NWCFG_COPYALLEN_MASK;
+	}
+
+	/* Allow broadcast address reception */
+		if ((Options & XEMACPS_BROADCAST_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_BCASTDI_MASK);
+	}
+
+	/* Allow multicast address filtering */
+		if ((Options & XEMACPS_MULTICAST_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= XEMACPS_NWCFG_MCASTHASHEN_MASK;
+	}
+
+	/* enable RX checksum offload */
+		if ((Options & XEMACPS_RX_CHKSUM_ENABLE_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= XEMACPS_NWCFG_RXCHKSUMEN_MASK;
+	}
+
+	/* Enable jumbo frames */
+	if (((Options & XEMACPS_JUMBO_ENABLE_OPTION) != 0x00000000U) &&
+		(InstancePtr->Version > 2)) {
+		RegNewNetCfg |= XEMACPS_NWCFG_JUMBO_MASK;
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_JUMBOMAXLEN_OFFSET, XEMACPS_RX_BUF_SIZE_JUMBO);
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				      XEMACPS_DMACR_OFFSET);
+		Reg &= ~XEMACPS_DMACR_RXBUF_MASK;
+		Reg |= (((((u32)XEMACPS_RX_BUF_SIZE_JUMBO / (u32)XEMACPS_RX_BUF_UNIT) +
+			(((((u32)XEMACPS_RX_BUF_SIZE_JUMBO %
+			(u32)XEMACPS_RX_BUF_UNIT))!=(u32)0) ? 1U : 0U)) <<
+			(u32)(XEMACPS_DMACR_RXBUF_SHIFT)) &
+			(u32)(XEMACPS_DMACR_RXBUF_MASK));
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_DMACR_OFFSET, Reg);
+		InstancePtr->MaxMtuSize = XEMACPS_MTU_JUMBO;
+		InstancePtr->MaxFrameSize = XEMACPS_MTU_JUMBO +
+					XEMACPS_HDR_SIZE + XEMACPS_TRL_SIZE;
+		InstancePtr->MaxVlanFrameSize = InstancePtr->MaxFrameSize +
+					XEMACPS_HDR_VLAN_SIZE;
+		InstancePtr->RxBufMask = XEMACPS_RXBUF_LEN_JUMBO_MASK;
+	}
+
+	if (((Options & XEMACPS_SGMII_ENABLE_OPTION) != 0x00000000U) &&
+		(InstancePtr->Version > 2)) {
+		RegNewNetCfg |= (XEMACPS_NWCFG_SGMIIEN_MASK |
+						XEMACPS_NWCFG_PCSSEL_MASK);
+	}
+
+	/* Officially change the NET_CONFIG registers if it needs to be
+	 * modified.
+	 */
+	if (RegNetCfg != RegNewNetCfg) {
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_NWCFG_OFFSET, RegNewNetCfg);
+	}
+
+	/* Enable TX checksum offload */
+		if ((Options & XEMACPS_TX_CHKSUM_ENABLE_OPTION) != 0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_DMACR_OFFSET);
+		Reg |= XEMACPS_DMACR_TCPCKSUM_MASK;
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+					 XEMACPS_DMACR_OFFSET, Reg);
+	}
+
+	/* Enable transmitter */
+		if ((Options & XEMACPS_TRANSMITTER_ENABLE_OPTION) != 0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET);
+		Reg |= XEMACPS_NWCTRL_TXEN_MASK;
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_NWCTRL_OFFSET, Reg);
+	}
+
+	/* Enable receiver */
+		if ((Options & XEMACPS_RECEIVER_ENABLE_OPTION) != 0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET);
+		Reg |= XEMACPS_NWCTRL_RXEN_MASK;
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_NWCTRL_OFFSET, Reg);
+	}
+
+	/* The remaining options not handled here are managed elsewhere in the
+	 * driver. No register modifications are needed at this time. Reflecting
+	 * the option in InstancePtr->Options is good enough for now.
+	 */
+
+	/* Set options word to its new value */
+	InstancePtr->Options |= Options;
+
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Clear options for the driver/device
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param Options are the options to clear. Multiple options can be cleared by
+ *        OR'ing XEMACPS_*_OPTIONS constants together. Options not specified
+ *        are not affected.
+ *
+ * @return
+ * - XST_SUCCESS if the options were set successfully
+ * - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+ *
+ * @note
+ * See xemacps.h for a description of the available options.
+ *
+ *****************************************************************************/
+LONG XEmacPs_ClearOptions(XEmacPs *InstancePtr, u32 Options)
+{
+	u32 Reg;		/* Generic */
+	u32 RegNetCfg;		/* Reflects original contents of NET_CONFIG */
+	u32 RegNewNetCfg;	/* Reflects new contents of NET_CONFIG */
+	LONG Status;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* Be sure device has been stopped */
+	if (InstancePtr->IsStarted == (u32)XIL_COMPONENT_IS_STARTED) {
+		Status = (LONG)(XST_DEVICE_IS_STARTED);
+	} else {
+
+	/* Many of these options will change the NET_CONFIG registers.
+	 * To reduce the amount of IO to the device, group these options here
+	 * and change them all at once.
+	 */
+
+	/* Grab current register contents */
+	RegNetCfg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				      XEMACPS_NWCFG_OFFSET);
+	RegNewNetCfg = RegNetCfg;
+
+	/* There is only RX configuration!?
+	 * It is configured in two different length, upto 1536 and 10240 bytes
+	 */
+		if ((Options & XEMACPS_FRAME1536_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_1536RXEN_MASK);
+	}
+
+	/* Turn off VLAN packet only */
+		if ((Options & XEMACPS_VLAN_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_NVLANDISC_MASK);
+	}
+
+	/* Turn off FCS stripping on receive packets */
+		if ((Options & XEMACPS_FCS_STRIP_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_FCSREM_MASK);
+	}
+
+	/* Turn off length/type field checking on receive packets */
+		if ((Options & XEMACPS_LENTYPE_ERR_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_LENERRDSCRD_MASK);
+	}
+
+	/* Turn off flow control */
+		if ((Options & XEMACPS_FLOW_CONTROL_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_PAUSEEN_MASK);
+	}
+
+	/* Turn off promiscuous frame filtering (all frames are received) */
+		if ((Options & XEMACPS_PROMISC_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_COPYALLEN_MASK);
+	}
+
+	/* Disallow broadcast address filtering => broadcast reception */
+		if ((Options & XEMACPS_BROADCAST_OPTION) != 0x00000000U) {
+		RegNewNetCfg |= XEMACPS_NWCFG_BCASTDI_MASK;
+	}
+
+	/* Disallow multicast address filtering */
+		if ((Options & XEMACPS_MULTICAST_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_MCASTHASHEN_MASK);
+	}
+
+	/* Disable RX checksum offload */
+		if ((Options & XEMACPS_RX_CHKSUM_ENABLE_OPTION) != 0x00000000U) {
+			RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_RXCHKSUMEN_MASK);
+	}
+
+	/* Disable jumbo frames */
+	if (((Options & XEMACPS_JUMBO_ENABLE_OPTION) != 0x00000000U) &&
+		(InstancePtr->Version > 2)) {
+		RegNewNetCfg &= (u32)(~XEMACPS_NWCFG_JUMBO_MASK);
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				      XEMACPS_DMACR_OFFSET);
+		Reg &= ~XEMACPS_DMACR_RXBUF_MASK;
+		Reg |= (((((u32)XEMACPS_RX_BUF_SIZE / (u32)XEMACPS_RX_BUF_UNIT) +
+			(((((u32)XEMACPS_RX_BUF_SIZE %
+			(u32)XEMACPS_RX_BUF_UNIT))!=(u32)0) ? 1U : 0U)) <<
+			(u32)(XEMACPS_DMACR_RXBUF_SHIFT)) &
+			(u32)(XEMACPS_DMACR_RXBUF_MASK));
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_DMACR_OFFSET, Reg);
+		InstancePtr->MaxMtuSize = XEMACPS_MTU;
+		InstancePtr->MaxFrameSize = XEMACPS_MTU +
+					XEMACPS_HDR_SIZE + XEMACPS_TRL_SIZE;
+		InstancePtr->MaxVlanFrameSize = InstancePtr->MaxFrameSize +
+					XEMACPS_HDR_VLAN_SIZE;
+		InstancePtr->RxBufMask = XEMACPS_RXBUF_LEN_MASK;
+	}
+
+	if (((Options & XEMACPS_SGMII_ENABLE_OPTION) != 0x00000000U) &&
+		(InstancePtr->Version > 2)) {
+		RegNewNetCfg &= (u32)(~(XEMACPS_NWCFG_SGMIIEN_MASK |
+						XEMACPS_NWCFG_PCSSEL_MASK));
+	}
+
+	/* Officially change the NET_CONFIG registers if it needs to be
+	 * modified.
+	 */
+	if (RegNetCfg != RegNewNetCfg) {
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_NWCFG_OFFSET, RegNewNetCfg);
+	}
+
+	/* Disable TX checksum offload */
+		if ((Options & XEMACPS_TX_CHKSUM_ENABLE_OPTION) != 0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_DMACR_OFFSET);
+			Reg &= (u32)(~XEMACPS_DMACR_TCPCKSUM_MASK);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+					 XEMACPS_DMACR_OFFSET, Reg);
+	}
+
+	/* Disable transmitter */
+		if ((Options & XEMACPS_TRANSMITTER_ENABLE_OPTION) != 0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET);
+			Reg &= (u32)(~XEMACPS_NWCTRL_TXEN_MASK);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_NWCTRL_OFFSET, Reg);
+	}
+
+	/* Disable receiver */
+		if ((Options & XEMACPS_RECEIVER_ENABLE_OPTION) != 0x00000000U) {
+		Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET);
+			Reg &= (u32)(~XEMACPS_NWCTRL_RXEN_MASK);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_NWCTRL_OFFSET, Reg);
+	}
+
+	/* The remaining options not handled here are managed elsewhere in the
+	 * driver. No register modifications are needed at this time. Reflecting
+	 * option in InstancePtr->Options is good enough for now.
+	 */
+
+	/* Set options word to its new value */
+	InstancePtr->Options &= ~Options;
+
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * Get current option settings
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ *
+ * @return
+ * A bitmask of XTE_*_OPTION constants. Any bit set to 1 is to be interpreted
+ * as a set opion.
+ *
+ * @note
+ * See xemacps.h for a description of the available options.
+ *
+ *****************************************************************************/
+u32 XEmacPs_GetOptions(XEmacPs *InstancePtr)
+{
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	return (InstancePtr->Options);
+}
+
+
+/*****************************************************************************/
+/**
+ * Send a pause packet
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ *
+ * @return
+ * - XST_SUCCESS if pause frame transmission was initiated
+ * - XST_DEVICE_IS_STOPPED if the device has not been started.
+ *
+ *****************************************************************************/
+LONG XEmacPs_SendPausePacket(XEmacPs *InstancePtr)
+{
+	u32 Reg;
+	LONG Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* Make sure device is ready for this operation */
+	if (InstancePtr->IsStarted != (u32)XIL_COMPONENT_IS_STARTED) {
+		Status = (LONG)(XST_DEVICE_IS_STOPPED);
+	} else {
+	/* Send flow control frame */
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_NWCTRL_OFFSET);
+	Reg |= XEMACPS_NWCTRL_PAUSETX_MASK;
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_NWCTRL_OFFSET, Reg);
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+ * XEmacPs_GetOperatingSpeed gets the current operating link speed. This may
+ * be the value set by XEmacPs_SetOperatingSpeed() or a hardware default.
+ *
+ * @param InstancePtr references the TEMAC channel on which to operate.
+ *
+ * @return XEmacPs_GetOperatingSpeed returns the link speed in units of
+ *         megabits per second.
+ *
+ * @note
+ *
+ *****************************************************************************/
+u16 XEmacPs_GetOperatingSpeed(XEmacPs *InstancePtr)
+{
+	u32 Reg;
+	u16 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_NWCFG_OFFSET);
+
+	if ((Reg & XEMACPS_NWCFG_1000_MASK) != 0x00000000U) {
+		Status = (u16)(1000);
+	} else {
+		if ((Reg & XEMACPS_NWCFG_100_MASK) != 0x00000000U) {
+			Status = (u16)(100);
+		} else {
+			Status = (u16)(10);
+		}
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+ * XEmacPs_SetOperatingSpeed sets the current operating link speed. For any
+ * traffic to be passed, this speed must match the current MII/GMII/SGMII/RGMII
+ * link speed.
+ *
+ * @param InstancePtr references the TEMAC channel on which to operate.
+ * @param Speed is the speed to set in units of Mbps. Valid values are 10, 100,
+ *        or 1000. XEmacPs_SetOperatingSpeed ignores invalid values.
+ *
+ * @note
+ *
+ *****************************************************************************/
+void XEmacPs_SetOperatingSpeed(XEmacPs *InstancePtr, u16 Speed)
+{
+        u32 Reg;
+	u16 Status;
+        Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+    Xil_AssertVoid((Speed == (u16)10) || (Speed == (u16)100) || (Speed == (u16)1000));
+
+        Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XEMACPS_NWCFG_OFFSET);
+	Reg &= (u32)(~(XEMACPS_NWCFG_1000_MASK | XEMACPS_NWCFG_100_MASK));
+
+	switch (Speed) {
+		case (u16)10:
+				Status = 0U;
+                break;
+
+        case (u16)100:
+			Status = 0U;
+                Reg |= XEMACPS_NWCFG_100_MASK;
+                break;
+
+        case (u16)1000:
+			Status = 0U;
+                Reg |= XEMACPS_NWCFG_1000_MASK;
+                break;
+
+        default:
+			Status = 1U;
+                break;
+    }
+	if(Status == (u16)1){
+                return;
+        }
+
+        /* Set register and return */
+        XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+                XEMACPS_NWCFG_OFFSET, Reg);
+}
+
+
+/*****************************************************************************/
+/**
+ * Set the MDIO clock divisor.
+ *
+ * Calculating the divisor:
+ *
+ * 
+ *              f[HOSTCLK]
+ *   f[MDC] = -----------------
+ *            (1 + Divisor) * 2
+ * 

+ *
+ * where f[HOSTCLK] is the bus clock frequency in MHz, and f[MDC] is the
+ * MDIO clock frequency in MHz to the PHY. Typically, f[MDC] should not
+ * exceed 2.5 MHz. Some PHYs can tolerate faster speeds which means faster
+ * access. Here is the table to show values to generate MDC,
+ *
+ * 
+ * 000 : divide pclk by   8 (pclk up to  20 MHz)
+ * 001 : divide pclk by  16 (pclk up to  40 MHz)
+ * 010 : divide pclk by  32 (pclk up to  80 MHz)
+ * 011 : divide pclk by  48 (pclk up to 120 MHz)
+ * 100 : divide pclk by  64 (pclk up to 160 MHz)
+ * 101 : divide pclk by  96 (pclk up to 240 MHz)
+ * 110 : divide pclk by 128 (pclk up to 320 MHz)
+ * 111 : divide pclk by 224 (pclk up to 540 MHz)
+ * 

+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param Divisor is the divisor to set. Range is 0b000 to 0b111.
+ *
+ *****************************************************************************/
+void XEmacPs_SetMdioDivisor(XEmacPs *InstancePtr, XEmacPs_MdcDiv Divisor)
+{
+	u32 Reg;
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Divisor <= (XEmacPs_MdcDiv)0x7); /* only last three bits are valid */
+
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_NWCFG_OFFSET);
+	/* clear these three bits, could be done with mask */
+	Reg &= (u32)(~XEMACPS_NWCFG_MDCCLKDIV_MASK);
+
+	Reg |= ((u32)Divisor << XEMACPS_NWCFG_MDC_SHIFT_MASK);
+
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_NWCFG_OFFSET, Reg);
+}
+
+
+/*****************************************************************************/
+/**
+* Read the current value of the PHY register indicated by the PhyAddress and
+* the RegisterNum parameters. The MAC provides the driver with the ability to
+* talk to a PHY that adheres to the Media Independent Interface (MII) as
+* defined in the IEEE 802.3 standard.
+*
+* Prior to PHY access with this function, the user should have setup the MDIO
+* clock with XEmacPs_SetMdioDivisor().
+*
+* @param InstancePtr is a pointer to the XEmacPs instance to be worked on.
+* @param PhyAddress is the address of the PHY to be read (supports multiple
+*        PHYs)
+* @param RegisterNum is the register number, 0-31, of the specific PHY register
+*        to read
+* @param PhyDataPtr is an output parameter, and points to a 16-bit buffer into
+*        which the current value of the register will be copied.
+*
+* @return
+*
+* - XST_SUCCESS if the PHY was read from successfully
+* - XST_EMAC_MII_BUSY if there is another PHY operation in progress
+*
+* @note
+*
+* This function is not thread-safe. The user must provide mutually exclusive
+* access to this function if there are to be multiple threads that can call it.
+*
+* There is the possibility that this function will not return if the hardware
+* is broken (i.e., it never sets the status bit indicating that the read is
+* done). If this is of concern to the user, the user should provide a mechanism
+* suitable to their needs for recovery.
+*
+* For the duration of this function, all host interface reads and writes are
+* blocked to the current XEmacPs instance.
+*
+******************************************************************************/
+LONG XEmacPs_PhyRead(XEmacPs *InstancePtr, u32 PhyAddress,
+		     u32 RegisterNum, u16 *PhyDataPtr)
+{
+	u32 Mgtcr;
+	volatile u32 Ipisr;
+	u32 IpReadTemp;
+	LONG Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+
+	/* Make sure no other PHY operation is currently in progress */
+	if ((!(XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_NWSR_OFFSET) &
+	      XEMACPS_NWSR_MDIOIDLE_MASK))==TRUE) {
+		Status = (LONG)(XST_EMAC_MII_BUSY);
+	} else {
+
+	/* Construct Mgtcr mask for the operation */
+	Mgtcr = XEMACPS_PHYMNTNC_OP_MASK | XEMACPS_PHYMNTNC_OP_R_MASK |
+			(PhyAddress << XEMACPS_PHYMNTNC_PHAD_SHFT_MSK) |
+			(RegisterNum << XEMACPS_PHYMNTNC_PREG_SHFT_MSK);
+
+	/* Write Mgtcr and wait for completion */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_PHYMNTNC_OFFSET, Mgtcr);
+
+	do {
+		Ipisr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XEMACPS_NWSR_OFFSET);
+			IpReadTemp = Ipisr;
+		} while ((IpReadTemp & XEMACPS_NWSR_MDIOIDLE_MASK) == 0x00000000U);
+
+	/* Read data */
+		*PhyDataPtr = (u16)XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_PHYMNTNC_OFFSET);
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+* Write data to the specified PHY register. The Ethernet driver does not
+* require the device to be stopped before writing to the PHY.  Although it is
+* probably a good idea to stop the device, it is the responsibility of the
+* application to deem this necessary. The MAC provides the driver with the
+* ability to talk to a PHY that adheres to the Media Independent Interface
+* (MII) as defined in the IEEE 802.3 standard.
+*
+* Prior to PHY access with this function, the user should have setup the MDIO
+* clock with XEmacPs_SetMdioDivisor().
+*
+* @param InstancePtr is a pointer to the XEmacPs instance to be worked on.
+* @param PhyAddress is the address of the PHY to be written (supports multiple
+*        PHYs)
+* @param RegisterNum is the register number, 0-31, of the specific PHY register
+*        to write
+* @param PhyData is the 16-bit value that will be written to the register
+*
+* @return
+*
+* - XST_SUCCESS if the PHY was written to successfully. Since there is no error
+*   status from the MAC on a write, the user should read the PHY to verify the
+*   write was successful.
+* - XST_EMAC_MII_BUSY if there is another PHY operation in progress
+*
+* @note
+*
+* This function is not thread-safe. The user must provide mutually exclusive
+* access to this function if there are to be multiple threads that can call it.
+*
+* There is the possibility that this function will not return if the hardware
+* is broken (i.e., it never sets the status bit indicating that the write is
+* done). If this is of concern to the user, the user should provide a mechanism
+* suitable to their needs for recovery.
+*
+* For the duration of this function, all host interface reads and writes are
+* blocked to the current XEmacPs instance.
+*
+******************************************************************************/
+LONG XEmacPs_PhyWrite(XEmacPs *InstancePtr, u32 PhyAddress,
+		      u32 RegisterNum, u16 PhyData)
+{
+	u32 Mgtcr;
+	volatile u32 Ipisr;
+	u32 IpWriteTemp;
+	LONG Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+
+	/* Make sure no other PHY operation is currently in progress */
+	if ((!(XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XEMACPS_NWSR_OFFSET) &
+	      XEMACPS_NWSR_MDIOIDLE_MASK))==TRUE) {
+		Status = (LONG)(XST_EMAC_MII_BUSY);
+	} else {
+	/* Construct Mgtcr mask for the operation */
+	Mgtcr = XEMACPS_PHYMNTNC_OP_MASK | XEMACPS_PHYMNTNC_OP_W_MASK |
+			(PhyAddress << XEMACPS_PHYMNTNC_PHAD_SHFT_MSK) |
+			(RegisterNum << XEMACPS_PHYMNTNC_PREG_SHFT_MSK) | (u32)PhyData;
+
+	/* Write Mgtcr and wait for completion */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XEMACPS_PHYMNTNC_OFFSET, Mgtcr);
+
+	do {
+		Ipisr = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XEMACPS_NWSR_OFFSET);
+				IpWriteTemp = Ipisr;
+		} while ((IpWriteTemp & XEMACPS_NWSR_MDIOIDLE_MASK) == 0x00000000U);
+
+		Status = (LONG)(XST_SUCCESS);
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+* API to update the Burst length in the DMACR register.
+*
+* @param InstancePtr is a pointer to the XEmacPs instance to be worked on.
+* @param BLength is the length in bytes for the dma burst.
+*
+* @return None
+*
+******************************************************************************/
+void XEmacPs_DMABLengthUpdate(XEmacPs *InstancePtr, s32 BLength)
+{
+	u32 Reg;
+	u32 RegUpdateVal;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid((BLength == XEMACPS_SINGLE_BURST) ||
+					(BLength == XEMACPS_4BYTE_BURST) ||
+					(BLength == XEMACPS_8BYTE_BURST) ||
+					(BLength == XEMACPS_16BYTE_BURST));
+
+	switch (BLength) {
+		case XEMACPS_SINGLE_BURST:
+			RegUpdateVal = XEMACPS_DMACR_SINGLE_AHB_BURST;
+			break;
+
+		case XEMACPS_4BYTE_BURST:
+			RegUpdateVal = XEMACPS_DMACR_INCR4_AHB_BURST;
+			break;
+
+		case XEMACPS_8BYTE_BURST:
+			RegUpdateVal = XEMACPS_DMACR_INCR8_AHB_BURST;
+			break;
+
+		case XEMACPS_16BYTE_BURST:
+			RegUpdateVal = XEMACPS_DMACR_INCR16_AHB_BURST;
+			break;
+
+		default:
+			RegUpdateVal = 0x00000000U;
+			break;
+	}
+	Reg = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+						XEMACPS_DMACR_OFFSET);
+
+	Reg &= (u32)(~XEMACPS_DMACR_BLENGTH_MASK);
+	Reg |= RegUpdateVal;
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_DMACR_OFFSET,
+																	Reg);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_g.c
new file mode 100644
index 000000000..6a7cc7866
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_g.c
@@ -0,0 +1,55 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xemacps.h"
+
+/*
+* The configuration table for devices
+*/
+
+XEmacPs_Config XEmacPs_ConfigTable[] =
+{
+	{
+		XPAR_PSU_ETHERNET_3_DEVICE_ID,
+		XPAR_PSU_ETHERNET_3_BASEADDR
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_hw.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_hw.c
new file mode 100644
index 000000000..daba38397
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_hw.c
@@ -0,0 +1,123 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemacps_hw.c
+* @addtogroup emacps_v3_1
+* @{
+*
+* This file contains the implementation of the ethernet interface reset sequence
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.05a kpc  28/06/13 First release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps_hw.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+* This function perform the reset sequence to the given emacps interface by
+* configuring the appropriate control bits in the emacps specifc registers.
+* the emacps reset squence involves the following steps
+*	Disable all the interuupts
+*	Clear the status registers
+*	Disable Rx and Tx engines
+*	Update the Tx and Rx descriptor queue registers with reset values
+*	Update the other relevant control registers with reset value
+*
+* @param   BaseAddress of the interface
+*
+* @return N/A
+*
+* @note
+* This function will not modify the slcr registers that are relavant for
+* emacps controller
+******************************************************************************/
+void XEmacPs_ResetHw(u32 BaseAddr)
+{
+	u32 RegVal;
+
+	/* Disable the interrupts  */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_IDR_OFFSET,0x0U);
+
+	/* Stop transmission,disable loopback and Stop tx and Rx engines */
+	RegVal = XEmacPs_ReadReg(BaseAddr,XEMACPS_NWCTRL_OFFSET);
+	RegVal &= ~((u32)XEMACPS_NWCTRL_TXEN_MASK|
+				(u32)XEMACPS_NWCTRL_RXEN_MASK|
+				(u32)XEMACPS_NWCTRL_HALTTX_MASK|
+				(u32)XEMACPS_NWCTRL_LOOPEN_MASK);
+	/* Clear the statistic registers, flush the packets in DPRAM*/
+	RegVal |= (XEMACPS_NWCTRL_STATCLR_MASK|
+				XEMACPS_NWCTRL_FLUSH_DPRAM_MASK);
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_NWCTRL_OFFSET,RegVal);
+	/* Clear the interrupt status */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_ISR_OFFSET,XEMACPS_IXR_ALL_MASK);
+	/* Clear the tx status */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_TXSR_OFFSET,(XEMACPS_TXSR_ERROR_MASK|
+									(u32)XEMACPS_TXSR_TXCOMPL_MASK|
+									(u32)XEMACPS_TXSR_TXGO_MASK));
+	/* Clear the rx status */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_RXSR_OFFSET,
+								XEMACPS_RXSR_FRAMERX_MASK);
+	/* Clear the tx base address */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_TXQBASE_OFFSET,0x0U);
+	/* Clear the rx base address */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_RXQBASE_OFFSET,0x0U);
+	/* Update the network config register with reset value */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_NWCFG_OFFSET,XEMACPS_NWCFG_RESET_MASK);
+	/* Update the hash address registers with reset value */
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_HASHL_OFFSET,0x0U);
+	XEmacPs_WriteReg(BaseAddr,XEMACPS_HASHH_OFFSET,0x0U);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_hw.h
new file mode 100644
index 000000000..953cc6265
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_hw.h
@@ -0,0 +1,656 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemacps_hw.h
+* @addtogroup emacps_v3_1
+* @{
+*
+* This header file contains identifiers and low-level driver functions (or
+* macros) that can be used to access the PS Ethernet MAC (XEmacPs) device.
+* High-level driver functions are defined in xemacps.h.
+*
+* @note
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release.
+* 1.02a asa  11/05/12 Added hash defines for DMACR burst length configuration.
+* 1.05a kpc  28/06/13 Added XEmacPs_ResetHw function prototype
+* 1.06a asa  11/02/13 Changed the value for XEMACPS_RXBUF_LEN_MASK from 0x3fff
+*					  to 0x1fff. This fixes the CR#744902.
+* 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp GEM specification.
+* 3.0   kvn  12/16/14 Changed name of XEMACPS_NWCFG_LENGTHERRDSCRD_MASK to
+*					  XEMACPS_NWCFG_LENERRDSCRD_MASK as it exceeds 31 characters.
+* 3.0  kpc   1/23/15  Corrected the extended descriptor macro values.
+* 3.0  kvn   02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.0  hk   03/18/15 Added support for jumbo frames.
+*                    Remove "used bit set" from TX error interrupt masks.
+* 3.1  hk   08/10/15 Update upper 32 bit tx and rx queue ptr register offsets.
+* 3.2   hk   02/22/16 Added SGMII support for Zynq Ultrascale+ MPSoC.
+* 

+*
+******************************************************************************/
+
+#ifndef XEMACPS_HW_H		/* prevent circular inclusions */
+#define XEMACPS_HW_H		/* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/************************** Constant Definitions *****************************/
+
+#define XEMACPS_MAX_MAC_ADDR     4U   /**< Maxmum number of mac address
+                                           supported */
+#define XEMACPS_MAX_TYPE_ID      4U   /**< Maxmum number of type id supported */
+
+#ifdef __aarch64__
+#define XEMACPS_BD_ALIGNMENT     64U   /**< Minimum buffer descriptor alignment
+                                           on the local bus */
+#else
+
+#define XEMACPS_BD_ALIGNMENT     4U   /**< Minimum buffer descriptor alignment
+                                           on the local bus */
+#endif
+#define XEMACPS_RX_BUF_ALIGNMENT 4U   /**< Minimum buffer alignment when using
+                                           options that impose alignment
+                                           restrictions on the buffer data on
+                                           the local bus */
+
+/** @name Direction identifiers
+ *
+ *  These are used by several functions and callbacks that need
+ *  to specify whether an operation specifies a send or receive channel.
+ * @{
+ */
+#define XEMACPS_SEND        1U	      /**< send direction */
+#define XEMACPS_RECV        2U	      /**< receive direction */
+/*@}*/
+
+/**  @name MDC clock division
+ *  currently supporting 8, 16, 32, 48, 64, 96, 128, 224.
+ * @{
+ */
+typedef enum { MDC_DIV_8 = 0U, MDC_DIV_16, MDC_DIV_32, MDC_DIV_48,
+	MDC_DIV_64, MDC_DIV_96, MDC_DIV_128, MDC_DIV_224
+} XEmacPs_MdcDiv;
+
+/*@}*/
+
+#define XEMACPS_RX_BUF_SIZE 1536U /**< Specify the receive buffer size in
+                                       bytes, 64, 128, ... 10240 */
+#define XEMACPS_RX_BUF_SIZE_JUMBO 10240U
+
+#define XEMACPS_RX_BUF_UNIT   64U /**< Number of receive buffer bytes as a
+                                       unit, this is HW setup */
+
+#define XEMACPS_MAX_RXBD     128U /**< Size of RX buffer descriptor queues */
+#define XEMACPS_MAX_TXBD     128U /**< Size of TX buffer descriptor queues */
+
+#define XEMACPS_MAX_HASH_BITS 64U /**< Maximum value for hash bits. 2**6 */
+
+/* Register offset definitions. Unless otherwise noted, register access is
+ * 32 bit. Names are self explained here.
+ */
+
+#define XEMACPS_NWCTRL_OFFSET        0x00000000U /**< Network Control reg */
+#define XEMACPS_NWCFG_OFFSET         0x00000004U /**< Network Config reg */
+#define XEMACPS_NWSR_OFFSET          0x00000008U /**< Network Status reg */
+
+#define XEMACPS_DMACR_OFFSET         0x00000010U /**< DMA Control reg */
+#define XEMACPS_TXSR_OFFSET          0x00000014U /**< TX Status reg */
+#define XEMACPS_RXQBASE_OFFSET       0x00000018U /**< RX Q Base address reg */
+#define XEMACPS_TXQBASE_OFFSET       0x0000001CU /**< TX Q Base address reg */
+#define XEMACPS_RXSR_OFFSET          0x00000020U /**< RX Status reg */
+
+#define XEMACPS_ISR_OFFSET           0x00000024U /**< Interrupt Status reg */
+#define XEMACPS_IER_OFFSET           0x00000028U /**< Interrupt Enable reg */
+#define XEMACPS_IDR_OFFSET           0x0000002CU /**< Interrupt Disable reg */
+#define XEMACPS_IMR_OFFSET           0x00000030U /**< Interrupt Mask reg */
+
+#define XEMACPS_PHYMNTNC_OFFSET      0x00000034U /**< Phy Maintaince reg */
+#define XEMACPS_RXPAUSE_OFFSET       0x00000038U /**< RX Pause Time reg */
+#define XEMACPS_TXPAUSE_OFFSET       0x0000003CU /**< TX Pause Time reg */
+
+#define XEMACPS_JUMBOMAXLEN_OFFSET   0x00000048U /**< Jumbo max length reg */
+
+#define XEMACPS_HASHL_OFFSET         0x00000080U /**< Hash Low address reg */
+#define XEMACPS_HASHH_OFFSET         0x00000084U /**< Hash High address reg */
+
+#define XEMACPS_LADDR1L_OFFSET       0x00000088U /**< Specific1 addr low reg */
+#define XEMACPS_LADDR1H_OFFSET       0x0000008CU /**< Specific1 addr high reg */
+#define XEMACPS_LADDR2L_OFFSET       0x00000090U /**< Specific2 addr low reg */
+#define XEMACPS_LADDR2H_OFFSET       0x00000094U /**< Specific2 addr high reg */
+#define XEMACPS_LADDR3L_OFFSET       0x00000098U /**< Specific3 addr low reg */
+#define XEMACPS_LADDR3H_OFFSET       0x0000009CU /**< Specific3 addr high reg */
+#define XEMACPS_LADDR4L_OFFSET       0x000000A0U /**< Specific4 addr low reg */
+#define XEMACPS_LADDR4H_OFFSET       0x000000A4U /**< Specific4 addr high reg */
+
+#define XEMACPS_MATCH1_OFFSET        0x000000A8U /**< Type ID1 Match reg */
+#define XEMACPS_MATCH2_OFFSET        0x000000ACU /**< Type ID2 Match reg */
+#define XEMACPS_MATCH3_OFFSET        0x000000B0U /**< Type ID3 Match reg */
+#define XEMACPS_MATCH4_OFFSET        0x000000B4U /**< Type ID4 Match reg */
+
+#define XEMACPS_STRETCH_OFFSET       0x000000BCU /**< IPG Stretch reg */
+
+#define XEMACPS_OCTTXL_OFFSET        0x00000100U /**< Octects transmitted Low
+                                                      reg */
+#define XEMACPS_OCTTXH_OFFSET        0x00000104U /**< Octects transmitted High
+                                                      reg */
+
+#define XEMACPS_TXCNT_OFFSET         0x00000108U /**< Error-free Frmaes
+                                                      transmitted counter */
+#define XEMACPS_TXBCCNT_OFFSET       0x0000010CU /**< Error-free Broadcast
+                                                      Frames counter*/
+#define XEMACPS_TXMCCNT_OFFSET       0x00000110U /**< Error-free Multicast
+                                                      Frame counter */
+#define XEMACPS_TXPAUSECNT_OFFSET    0x00000114U /**< Pause Frames Transmitted
+                                                      Counter */
+#define XEMACPS_TX64CNT_OFFSET       0x00000118U /**< Error-free 64 byte Frames
+                                                      Transmitted counter */
+#define XEMACPS_TX65CNT_OFFSET       0x0000011CU /**< Error-free 65-127 byte
+                                                      Frames Transmitted
+                                                      counter */
+#define XEMACPS_TX128CNT_OFFSET      0x00000120U /**< Error-free 128-255 byte
+                                                      Frames Transmitted
+                                                      counter*/
+#define XEMACPS_TX256CNT_OFFSET      0x00000124U /**< Error-free 256-511 byte
+                                                      Frames transmitted
+                                                      counter */
+#define XEMACPS_TX512CNT_OFFSET      0x00000128U /**< Error-free 512-1023 byte
+                                                      Frames transmitted
+                                                      counter */
+#define XEMACPS_TX1024CNT_OFFSET     0x0000012CU /**< Error-free 1024-1518 byte
+                                                      Frames transmitted
+                                                      counter */
+#define XEMACPS_TX1519CNT_OFFSET     0x00000130U /**< Error-free larger than
+                                                      1519 byte Frames
+                                                      transmitted counter */
+#define XEMACPS_TXURUNCNT_OFFSET     0x00000134U /**< TX under run error
+                                                      counter */
+
+#define XEMACPS_SNGLCOLLCNT_OFFSET   0x00000138U /**< Single Collision Frame
+                                                      Counter */
+#define XEMACPS_MULTICOLLCNT_OFFSET  0x0000013CU /**< Multiple Collision Frame
+                                                      Counter */
+#define XEMACPS_EXCESSCOLLCNT_OFFSET 0x00000140U /**< Excessive Collision Frame
+                                                      Counter */
+#define XEMACPS_LATECOLLCNT_OFFSET   0x00000144U /**< Late Collision Frame
+                                                      Counter */
+#define XEMACPS_TXDEFERCNT_OFFSET    0x00000148U /**< Deferred Transmission
+                                                      Frame Counter */
+#define XEMACPS_TXCSENSECNT_OFFSET   0x0000014CU /**< Transmit Carrier Sense
+                                                      Error Counter */
+
+#define XEMACPS_OCTRXL_OFFSET        0x00000150U /**< Octects Received register
+                                                      Low */
+#define XEMACPS_OCTRXH_OFFSET        0x00000154U /**< Octects Received register
+                                                      High */
+
+#define XEMACPS_RXCNT_OFFSET         0x00000158U /**< Error-free Frames
+                                                      Received Counter */
+#define XEMACPS_RXBROADCNT_OFFSET    0x0000015CU /**< Error-free Broadcast
+                                                      Frames Received Counter */
+#define XEMACPS_RXMULTICNT_OFFSET    0x00000160U /**< Error-free Multicast
+                                                      Frames Received Counter */
+#define XEMACPS_RXPAUSECNT_OFFSET    0x00000164U /**< Pause Frames
+                                                      Received Counter */
+#define XEMACPS_RX64CNT_OFFSET       0x00000168U /**< Error-free 64 byte Frames
+                                                      Received Counter */
+#define XEMACPS_RX65CNT_OFFSET       0x0000016CU /**< Error-free 65-127 byte
+                                                      Frames Received Counter */
+#define XEMACPS_RX128CNT_OFFSET      0x00000170U /**< Error-free 128-255 byte
+                                                      Frames Received Counter */
+#define XEMACPS_RX256CNT_OFFSET      0x00000174U /**< Error-free 256-512 byte
+                                                      Frames Received Counter */
+#define XEMACPS_RX512CNT_OFFSET      0x00000178U /**< Error-free 512-1023 byte
+                                                      Frames Received Counter */
+#define XEMACPS_RX1024CNT_OFFSET     0x0000017CU /**< Error-free 1024-1518 byte
+                                                      Frames Received Counter */
+#define XEMACPS_RX1519CNT_OFFSET     0x00000180U /**< Error-free 1519-max byte
+                                                      Frames Received Counter */
+#define XEMACPS_RXUNDRCNT_OFFSET     0x00000184U /**< Undersize Frames Received
+                                                      Counter */
+#define XEMACPS_RXOVRCNT_OFFSET      0x00000188U /**< Oversize Frames Received
+                                                      Counter */
+#define XEMACPS_RXJABCNT_OFFSET      0x0000018CU /**< Jabbers Received
+                                                      Counter */
+#define XEMACPS_RXFCSCNT_OFFSET      0x00000190U /**< Frame Check Sequence
+                                                      Error Counter */
+#define XEMACPS_RXLENGTHCNT_OFFSET   0x00000194U /**< Length Field Error
+                                                      Counter */
+#define XEMACPS_RXSYMBCNT_OFFSET     0x00000198U /**< Symbol Error Counter */
+#define XEMACPS_RXALIGNCNT_OFFSET    0x0000019CU /**< Alignment Error Counter */
+#define XEMACPS_RXRESERRCNT_OFFSET   0x000001A0U /**< Receive Resource Error
+                                                      Counter */
+#define XEMACPS_RXORCNT_OFFSET       0x000001A4U /**< Receive Overrun Counter */
+#define XEMACPS_RXIPCCNT_OFFSET      0x000001A8U /**< IP header Checksum Error
+                                                      Counter */
+#define XEMACPS_RXTCPCCNT_OFFSET     0x000001ACU /**< TCP Checksum Error
+                                                      Counter */
+#define XEMACPS_RXUDPCCNT_OFFSET     0x000001B0U /**< UDP Checksum Error
+                                                      Counter */
+#define XEMACPS_LAST_OFFSET          0x000001B4U /**< Last statistic counter
+						      offset, for clearing */
+
+#define XEMACPS_1588_SEC_OFFSET      0x000001D0U /**< 1588 second counter */
+#define XEMACPS_1588_NANOSEC_OFFSET  0x000001D4U /**< 1588 nanosecond counter */
+#define XEMACPS_1588_ADJ_OFFSET      0x000001D8U /**< 1588 nanosecond
+						      adjustment counter */
+#define XEMACPS_1588_INC_OFFSET      0x000001DCU /**< 1588 nanosecond
+						      increment counter */
+#define XEMACPS_PTP_TXSEC_OFFSET     0x000001E0U /**< 1588 PTP transmit second
+						      counter */
+#define XEMACPS_PTP_TXNANOSEC_OFFSET 0x000001E4U /**< 1588 PTP transmit
+						      nanosecond counter */
+#define XEMACPS_PTP_RXSEC_OFFSET     0x000001E8U /**< 1588 PTP receive second
+						      counter */
+#define XEMACPS_PTP_RXNANOSEC_OFFSET 0x000001ECU /**< 1588 PTP receive
+						      nanosecond counter */
+#define XEMACPS_PTPP_TXSEC_OFFSET    0x000001F0U /**< 1588 PTP peer transmit
+						      second counter */
+#define XEMACPS_PTPP_TXNANOSEC_OFFSET 0x000001F4U /**< 1588 PTP peer transmit
+						      nanosecond counter */
+#define XEMACPS_PTPP_RXSEC_OFFSET    0x000001F8U /**< 1588 PTP peer receive
+						      second counter */
+#define XEMACPS_PTPP_RXNANOSEC_OFFSET 0x000001FCU /**< 1588 PTP peer receive
+						      nanosecond counter */
+
+#define XEMACPS_INTQ1_STS_OFFSET     0x00000400U /**< Interrupt Q1 Status
+							reg */
+#define XEMACPS_TXQ1BASE_OFFSET	     0x00000440U /**< TX Q1 Base address
+							reg */
+#define XEMACPS_RXQ1BASE_OFFSET	     0x00000480U /**< RX Q1 Base address
+							reg */
+#define XEMACPS_MSBBUF_TXQBASE_OFFSET  0x000004C8U /**< MSB Buffer TX Q Base
+							reg */
+#define XEMACPS_MSBBUF_RXQBASE_OFFSET  0x000004D4U /**< MSB Buffer RX Q Base
+							reg */
+#define XEMACPS_INTQ1_IER_OFFSET     0x00000600U /**< Interrupt Q1 Enable
+							reg */
+#define XEMACPS_INTQ1_IDR_OFFSET     0x00000620U /**< Interrupt Q1 Disable
+							reg */
+#define XEMACPS_INTQ1_IMR_OFFSET     0x00000640U /**< Interrupt Q1 Mask
+							reg */
+
+/* Define some bit positions for registers. */
+
+/** @name network control register bit definitions
+ * @{
+ */
+#define XEMACPS_NWCTRL_FLUSH_DPRAM_MASK	0x00040000U /**< Flush a packet from
+							Rx SRAM */
+#define XEMACPS_NWCTRL_ZEROPAUSETX_MASK 0x00000800U /**< Transmit zero quantum
+                                                         pause frame */
+#define XEMACPS_NWCTRL_PAUSETX_MASK     0x00000800U /**< Transmit pause frame */
+#define XEMACPS_NWCTRL_HALTTX_MASK      0x00000400U /**< Halt transmission
+                                                         after current frame */
+#define XEMACPS_NWCTRL_STARTTX_MASK     0x00000200U /**< Start tx (tx_go) */
+
+#define XEMACPS_NWCTRL_STATWEN_MASK     0x00000080U /**< Enable writing to
+                                                         stat counters */
+#define XEMACPS_NWCTRL_STATINC_MASK     0x00000040U /**< Increment statistic
+                                                         registers */
+#define XEMACPS_NWCTRL_STATCLR_MASK     0x00000020U /**< Clear statistic
+                                                         registers */
+#define XEMACPS_NWCTRL_MDEN_MASK        0x00000010U /**< Enable MDIO port */
+#define XEMACPS_NWCTRL_TXEN_MASK        0x00000008U /**< Enable transmit */
+#define XEMACPS_NWCTRL_RXEN_MASK        0x00000004U /**< Enable receive */
+#define XEMACPS_NWCTRL_LOOPEN_MASK      0x00000002U /**< local loopback */
+/*@}*/
+
+/** @name network configuration register bit definitions
+ * @{
+ */
+#define XEMACPS_NWCFG_BADPREAMBEN_MASK 0x20000000U /**< disable rejection of
+                                                        non-standard preamble */
+#define XEMACPS_NWCFG_IPDSTRETCH_MASK  0x10000000U /**< enable transmit IPG */
+#define XEMACPS_NWCFG_SGMIIEN_MASK     0x08000000U /**< SGMII Enable */
+#define XEMACPS_NWCFG_FCSIGNORE_MASK   0x04000000U /**< disable rejection of
+                                                        FCS error */
+#define XEMACPS_NWCFG_HDRXEN_MASK      0x02000000U /**< RX half duplex */
+#define XEMACPS_NWCFG_RXCHKSUMEN_MASK  0x01000000U /**< enable RX checksum
+                                                        offload */
+#define XEMACPS_NWCFG_PAUSECOPYDI_MASK 0x00800000U /**< Do not copy pause
+                                                        Frames to memory */
+#define XEMACPS_NWCFG_DWIDTH_64_MASK   0x00200000U /**< 64 bit Data bus width */
+#define XEMACPS_NWCFG_MDC_SHIFT_MASK   18U	   /**< shift bits for MDC */
+#define XEMACPS_NWCFG_MDCCLKDIV_MASK   0x001C0000U /**< MDC Mask PCLK divisor */
+#define XEMACPS_NWCFG_FCSREM_MASK      0x00020000U /**< Discard FCS from
+                                                        received frames */
+#define XEMACPS_NWCFG_LENERRDSCRD_MASK 0x00010000U
+/**< RX length error discard */
+#define XEMACPS_NWCFG_RXOFFS_MASK      0x0000C000U /**< RX buffer offset */
+#define XEMACPS_NWCFG_PAUSEEN_MASK     0x00002000U /**< Enable pause RX */
+#define XEMACPS_NWCFG_RETRYTESTEN_MASK 0x00001000U /**< Retry test */
+#define XEMACPS_NWCFG_XTADDMACHEN_MASK 0x00000200U
+/**< External address match enable */
+#define XEMACPS_NWCFG_PCSSEL_MASK      0x00000800U /**< PCS Select */
+#define XEMACPS_NWCFG_1000_MASK        0x00000400U /**< 1000 Mbps */
+#define XEMACPS_NWCFG_1536RXEN_MASK    0x00000100U /**< Enable 1536 byte
+                                                        frames reception */
+#define XEMACPS_NWCFG_UCASTHASHEN_MASK 0x00000080U /**< Receive unicast hash
+                                                        frames */
+#define XEMACPS_NWCFG_MCASTHASHEN_MASK 0x00000040U /**< Receive multicast hash
+                                                        frames */
+#define XEMACPS_NWCFG_BCASTDI_MASK     0x00000020U /**< Do not receive
+                                                        broadcast frames */
+#define XEMACPS_NWCFG_COPYALLEN_MASK   0x00000010U /**< Copy all frames */
+#define XEMACPS_NWCFG_JUMBO_MASK       0x00000008U /**< Jumbo frames */
+#define XEMACPS_NWCFG_NVLANDISC_MASK   0x00000004U /**< Receive only VLAN
+                                                        frames */
+#define XEMACPS_NWCFG_FDEN_MASK        0x00000002U/**< full duplex */
+#define XEMACPS_NWCFG_100_MASK         0x00000001U /**< 100 Mbps */
+#define XEMACPS_NWCFG_RESET_MASK       0x00080000U/**< reset value */
+/*@}*/
+
+/** @name network status register bit definitaions
+ * @{
+ */
+#define XEMACPS_NWSR_MDIOIDLE_MASK     0x00000004U /**< PHY management idle */
+#define XEMACPS_NWSR_MDIO_MASK         0x00000002U /**< Status of mdio_in */
+/*@}*/
+
+
+/** @name MAC address register word 1 mask
+ * @{
+ */
+#define XEMACPS_LADDR_MACH_MASK        0x0000FFFFU /**< Address bits[47:32]
+                                                      bit[31:0] are in BOTTOM */
+/*@}*/
+
+
+/** @name DMA control register bit definitions
+ * @{
+ */
+#define XEMACPS_DMACR_ADDR_WIDTH_64		0x40000000U /**< 64 bit address bus */
+#define XEMACPS_DMACR_TXEXTEND_MASK		0x20000000U /**< Tx Extended desc mode */
+#define XEMACPS_DMACR_RXEXTEND_MASK		0x10000000U /**< Rx Extended desc mode */
+#define XEMACPS_DMACR_RXBUF_MASK		0x00FF0000U /**< Mask bit for RX buffer
+													size */
+#define XEMACPS_DMACR_RXBUF_SHIFT 		16U	/**< Shift bit for RX buffer
+												size */
+#define XEMACPS_DMACR_TCPCKSUM_MASK		0x00000800U /**< enable/disable TX
+													    checksum offload */
+#define XEMACPS_DMACR_TXSIZE_MASK		0x00000400U /**< TX buffer memory size */
+#define XEMACPS_DMACR_RXSIZE_MASK		0x00000300U /**< RX buffer memory size */
+#define XEMACPS_DMACR_ENDIAN_MASK		0x00000080U /**< endian configuration */
+#define XEMACPS_DMACR_BLENGTH_MASK		0x0000001FU /**< buffer burst length */
+#define XEMACPS_DMACR_SINGLE_AHB_BURST	0x00000001U /**< single AHB bursts */
+#define XEMACPS_DMACR_INCR4_AHB_BURST	0x00000004U /**< 4 bytes AHB bursts */
+#define XEMACPS_DMACR_INCR8_AHB_BURST	0x00000008U /**< 8 bytes AHB bursts */
+#define XEMACPS_DMACR_INCR16_AHB_BURST	0x00000010U /**< 16 bytes AHB bursts */
+/*@}*/
+
+/** @name transmit status register bit definitions
+ * @{
+ */
+#define XEMACPS_TXSR_HRESPNOK_MASK    0x00000100U /**< Transmit hresp not OK */
+#define XEMACPS_TXSR_URUN_MASK        0x00000040U /**< Transmit underrun */
+#define XEMACPS_TXSR_TXCOMPL_MASK     0x00000020U /**< Transmit completed OK */
+#define XEMACPS_TXSR_BUFEXH_MASK      0x00000010U /**< Transmit buffs exhausted
+                                                       mid frame */
+#define XEMACPS_TXSR_TXGO_MASK        0x00000008U /**< Status of go flag */
+#define XEMACPS_TXSR_RXOVR_MASK       0x00000004U /**< Retry limit exceeded */
+#define XEMACPS_TXSR_FRAMERX_MASK     0x00000002U /**< Collision tx frame */
+#define XEMACPS_TXSR_USEDREAD_MASK    0x00000001U /**< TX buffer used bit set */
+
+#define XEMACPS_TXSR_ERROR_MASK      ((u32)XEMACPS_TXSR_HRESPNOK_MASK | \
+                                       (u32)XEMACPS_TXSR_URUN_MASK | \
+                                       (u32)XEMACPS_TXSR_BUFEXH_MASK | \
+                                       (u32)XEMACPS_TXSR_RXOVR_MASK | \
+                                       (u32)XEMACPS_TXSR_FRAMERX_MASK | \
+                                       (u32)XEMACPS_TXSR_USEDREAD_MASK)
+/*@}*/
+
+/**
+ * @name receive status register bit definitions
+ * @{
+ */
+#define XEMACPS_RXSR_HRESPNOK_MASK    0x00000008U /**< Receive hresp not OK */
+#define XEMACPS_RXSR_RXOVR_MASK       0x00000004U /**< Receive overrun */
+#define XEMACPS_RXSR_FRAMERX_MASK     0x00000002U /**< Frame received OK */
+#define XEMACPS_RXSR_BUFFNA_MASK      0x00000001U /**< RX buffer used bit set */
+
+#define XEMACPS_RXSR_ERROR_MASK      ((u32)XEMACPS_RXSR_HRESPNOK_MASK | \
+                                       (u32)XEMACPS_RXSR_RXOVR_MASK | \
+                                       (u32)XEMACPS_RXSR_BUFFNA_MASK)
+/*@}*/
+
+/**
+ * @name Interrupt Q1 status register bit definitions
+ * @{
+ */
+#define XEMACPS_INTQ1SR_TXCOMPL_MASK	0x00000080U /**< Transmit completed OK */
+#define XEMACPS_INTQ1SR_TXERR_MASK	0x00000040U /**< Transmit AMBA Error */
+
+#define XEMACPS_INTQ1_IXR_ALL_MASK	((u32)XEMACPS_INTQ1SR_TXCOMPL_MASK | \
+					 (u32)XEMACPS_INTQ1SR_TXERR_MASK)
+
+/*@}*/
+
+/**
+ * @name interrupts bit definitions
+ * Bits definitions are same in XEMACPS_ISR_OFFSET,
+ * XEMACPS_IER_OFFSET, XEMACPS_IDR_OFFSET, and XEMACPS_IMR_OFFSET
+ * @{
+ */
+#define XEMACPS_IXR_PTPPSTX_MASK    0x02000000U /**< PTP Psync transmitted */
+#define XEMACPS_IXR_PTPPDRTX_MASK   0x01000000U /**< PTP Pdelay_req
+						     transmitted */
+#define XEMACPS_IXR_PTPSTX_MASK     0x00800000U /**< PTP Sync transmitted */
+#define XEMACPS_IXR_PTPDRTX_MASK    0x00400000U /**< PTP Delay_req transmitted
+						*/
+#define XEMACPS_IXR_PTPPSRX_MASK    0x00200000U /**< PTP Psync received */
+#define XEMACPS_IXR_PTPPDRRX_MASK   0x00100000U /**< PTP Pdelay_req received */
+#define XEMACPS_IXR_PTPSRX_MASK     0x00080000U /**< PTP Sync received */
+#define XEMACPS_IXR_PTPDRRX_MASK    0x00040000U /**< PTP Delay_req received */
+#define XEMACPS_IXR_PAUSETX_MASK    0x00004000U	/**< Pause frame transmitted */
+#define XEMACPS_IXR_PAUSEZERO_MASK  0x00002000U	/**< Pause time has reached
+                                                     zero */
+#define XEMACPS_IXR_PAUSENZERO_MASK 0x00001000U	/**< Pause frame received */
+#define XEMACPS_IXR_HRESPNOK_MASK   0x00000800U	/**< hresp not ok */
+#define XEMACPS_IXR_RXOVR_MASK      0x00000400U	/**< Receive overrun occurred */
+#define XEMACPS_IXR_TXCOMPL_MASK    0x00000080U	/**< Frame transmitted ok */
+#define XEMACPS_IXR_TXEXH_MASK      0x00000040U	/**< Transmit err occurred or
+                                                     no buffers*/
+#define XEMACPS_IXR_RETRY_MASK      0x00000020U	/**< Retry limit exceeded */
+#define XEMACPS_IXR_URUN_MASK       0x00000010U	/**< Transmit underrun */
+#define XEMACPS_IXR_TXUSED_MASK     0x00000008U	/**< Tx buffer used bit read */
+#define XEMACPS_IXR_RXUSED_MASK     0x00000004U	/**< Rx buffer used bit read */
+#define XEMACPS_IXR_FRAMERX_MASK    0x00000002U	/**< Frame received ok */
+#define XEMACPS_IXR_MGMNT_MASK      0x00000001U	/**< PHY management complete */
+#define XEMACPS_IXR_ALL_MASK        0x00007FFFU	/**< Everything! */
+
+#define XEMACPS_IXR_TX_ERR_MASK    ((u32)XEMACPS_IXR_TXEXH_MASK |         \
+                                     (u32)XEMACPS_IXR_RETRY_MASK |         \
+                                     (u32)XEMACPS_IXR_URUN_MASK)
+
+
+#define XEMACPS_IXR_RX_ERR_MASK    ((u32)XEMACPS_IXR_HRESPNOK_MASK |      \
+                                     (u32)XEMACPS_IXR_RXUSED_MASK |        \
+                                     (u32)XEMACPS_IXR_RXOVR_MASK)
+
+/*@}*/
+
+/** @name PHY Maintenance bit definitions
+ * @{
+ */
+#define XEMACPS_PHYMNTNC_OP_MASK    0x40020000U	/**< operation mask bits */
+#define XEMACPS_PHYMNTNC_OP_R_MASK  0x20000000U	/**< read operation */
+#define XEMACPS_PHYMNTNC_OP_W_MASK  0x10000000U	/**< write operation */
+#define XEMACPS_PHYMNTNC_ADDR_MASK  0x0F800000U	/**< Address bits */
+#define XEMACPS_PHYMNTNC_REG_MASK   0x007C0000U	/**< register bits */
+#define XEMACPS_PHYMNTNC_DATA_MASK  0x00000FFFU	/**< data bits */
+#define XEMACPS_PHYMNTNC_PHAD_SHFT_MSK   23U	/**< Shift bits for PHYAD */
+#define XEMACPS_PHYMNTNC_PREG_SHFT_MSK   18U	/**< Shift bits for PHREG */
+/*@}*/
+
+/* Transmit buffer descriptor status words offset
+ * @{
+ */
+#define XEMACPS_BD_ADDR_OFFSET  0x00000000U /**< word 0/addr of BDs */
+#define XEMACPS_BD_STAT_OFFSET  0x00000004U /**< word 1/status of BDs */
+#define XEMACPS_BD_ADDR_HI_OFFSET  0x00000008U /**< word 2/addr of BDs */
+
+/*
+ * @}
+ */
+
+/* Transmit buffer descriptor status words bit positions.
+ * Transmit buffer descriptor consists of two 32-bit registers,
+ * the first - word0 contains a 32-bit address pointing to the location of
+ * the transmit data.
+ * The following register - word1, consists of various information to control
+ * the XEmacPs transmit process.  After transmit, this is updated with status
+ * information, whether the frame was transmitted OK or why it had failed.
+ * @{
+ */
+#define XEMACPS_TXBUF_USED_MASK  0x80000000U /**< Used bit. */
+#define XEMACPS_TXBUF_WRAP_MASK  0x40000000U /**< Wrap bit, last descriptor */
+#define XEMACPS_TXBUF_RETRY_MASK 0x20000000U /**< Retry limit exceeded */
+#define XEMACPS_TXBUF_URUN_MASK  0x10000000U /**< Transmit underrun occurred */
+#define XEMACPS_TXBUF_EXH_MASK   0x08000000U /**< Buffers exhausted */
+#define XEMACPS_TXBUF_TCP_MASK   0x04000000U /**< Late collision. */
+#define XEMACPS_TXBUF_NOCRC_MASK 0x00010000U /**< No CRC */
+#define XEMACPS_TXBUF_LAST_MASK  0x00008000U /**< Last buffer */
+#define XEMACPS_TXBUF_LEN_MASK   0x00003FFFU /**< Mask for length field */
+/*
+ * @}
+ */
+
+/* Receive buffer descriptor status words bit positions.
+ * Receive buffer descriptor consists of two 32-bit registers,
+ * the first - word0 contains a 32-bit word aligned address pointing to the
+ * address of the buffer. The lower two bits make up the wrap bit indicating
+ * the last descriptor and the ownership bit to indicate it has been used by
+ * the XEmacPs.
+ * The following register - word1, contains status information regarding why
+ * the frame was received (the filter match condition) as well as other
+ * useful info.
+ * @{
+ */
+#define XEMACPS_RXBUF_BCAST_MASK     0x80000000U /**< Broadcast frame */
+#define XEMACPS_RXBUF_MULTIHASH_MASK 0x40000000U /**< Multicast hashed frame */
+#define XEMACPS_RXBUF_UNIHASH_MASK   0x20000000U /**< Unicast hashed frame */
+#define XEMACPS_RXBUF_EXH_MASK       0x08000000U /**< buffer exhausted */
+#define XEMACPS_RXBUF_AMATCH_MASK    0x06000000U /**< Specific address
+                                                      matched */
+#define XEMACPS_RXBUF_IDFOUND_MASK   0x01000000U /**< Type ID matched */
+#define XEMACPS_RXBUF_IDMATCH_MASK   0x00C00000U /**< ID matched mask */
+#define XEMACPS_RXBUF_VLAN_MASK      0x00200000U /**< VLAN tagged */
+#define XEMACPS_RXBUF_PRI_MASK       0x00100000U /**< Priority tagged */
+#define XEMACPS_RXBUF_VPRI_MASK      0x000E0000U /**< Vlan priority */
+#define XEMACPS_RXBUF_CFI_MASK       0x00010000U /**< CFI frame */
+#define XEMACPS_RXBUF_EOF_MASK       0x00008000U /**< End of frame. */
+#define XEMACPS_RXBUF_SOF_MASK       0x00004000U /**< Start of frame. */
+#define XEMACPS_RXBUF_LEN_MASK       0x00001FFFU /**< Mask for length field */
+#define XEMACPS_RXBUF_LEN_JUMBO_MASK 0x00003FFFU /**< Mask for jumbo length */
+
+#define XEMACPS_RXBUF_WRAP_MASK      0x00000002U /**< Wrap bit, last BD */
+#define XEMACPS_RXBUF_NEW_MASK       0x00000001U /**< Used bit.. */
+#define XEMACPS_RXBUF_ADD_MASK       0xFFFFFFFCU /**< Mask for address */
+/*
+ * @}
+ */
+
+/*
+ * Define appropriate I/O access method to memory mapped I/O or other
+ * interface if necessary.
+ */
+
+#define XEmacPs_In32  Xil_In32
+#define XEmacPs_Out32 Xil_Out32
+
+
+/****************************************************************************/
+/**
+*
+* Read the given register.
+*
+* @param    BaseAddress is the base address of the device
+* @param    RegOffset is the register offset to be read
+*
+* @return   The 32-bit value of the register
+*
+* @note
+* C-style signature:
+*    u32 XEmacPs_ReadReg(u32 BaseAddress, u32 RegOffset)
+*
+*****************************************************************************/
+#define XEmacPs_ReadReg(BaseAddress, RegOffset) \
+    XEmacPs_In32((BaseAddress) + (u32)(RegOffset))
+
+
+/****************************************************************************/
+/**
+*
+* Write the given register.
+*
+* @param    BaseAddress is the base address of the device
+* @param    RegOffset is the register offset to be written
+* @param    Data is the 32-bit value to write to the register
+*
+* @return   None.
+*
+* @note
+* C-style signature:
+*    void XEmacPs_WriteReg(u32 BaseAddress, u32 RegOffset,
+*         u32 Data)
+*
+*****************************************************************************/
+#define XEmacPs_WriteReg(BaseAddress, RegOffset, Data) \
+    XEmacPs_Out32((BaseAddress) + (u32)(RegOffset), (u32)(Data))
+
+/************************** Function Prototypes *****************************/
+/*
+ * Perform reset operation to the emacps interface
+ */
+void XEmacPs_ResetHw(u32 BaseAddr);
+
+#ifdef __cplusplus
+  }
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_intr.c
new file mode 100644
index 000000000..59636c4ef
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_intr.c
@@ -0,0 +1,268 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemacps_intr.c
+* @addtogroup emacps_v3_1
+* @{
+*
+* Functions in this file implement general purpose interrupt processing related
+* functionality. See xemacps.h for a detailed description of the driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 First release
+* 1.03a asa  01/24/13 Fix for CR #692702 which updates error handling for
+*		      Rx errors. Under heavy Rx traffic, there will be a large
+*		      number of errors related to receive buffer not available.
+*		      Because of a HW bug (SI #692601), under such heavy errors,
+*		      the Rx data path can become unresponsive. To reduce the
+*		      probabilities for hitting this HW bug, the SW writes to
+*		      bit 18 to flush a packet from Rx DPRAM immediately. The
+*		      changes for it are done in the function
+*		      XEmacPs_IntrHandler.
+* 2.1   srt  07/15/14 Add support for Zynq Ultrascale Mp GEM specification
+*		       and 64-bit changes.
+* 3.0   kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1   hk   07/27/15 Do not call error handler with '0' error code when
+*                     there is no error. CR# 869403
+* 

+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+ * Install an asynchronious handler function for the given HandlerType:
+ *
+ * @param InstancePtr is a pointer to the instance to be worked on.
+ * @param HandlerType indicates what interrupt handler type is.
+ *        XEMACPS_HANDLER_DMASEND, XEMACPS_HANDLER_DMARECV and
+ *        XEMACPS_HANDLER_ERROR.
+ * @param FuncPointer is the pointer to the callback function
+ * @param CallBackRef is the upper layer callback reference passed back when
+ *        when the callback function is invoked.
+ *
+ * @return
+ *
+ * None.
+ *
+ * @note
+ * There is no assert on the CallBackRef since the driver doesn't know what
+ * it is.
+ *
+ *****************************************************************************/
+LONG XEmacPs_SetHandler(XEmacPs *InstancePtr, u32 HandlerType,
+			void *FuncPointer, void *CallBackRef)
+{
+	LONG Status;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(FuncPointer != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	switch (HandlerType) {
+	case XEMACPS_HANDLER_DMASEND:
+		Status = (LONG)(XST_SUCCESS);
+		InstancePtr->SendHandler = ((XEmacPs_Handler)(void *)FuncPointer);
+		InstancePtr->SendRef = CallBackRef;
+		break;
+	case XEMACPS_HANDLER_DMARECV:
+		Status = (LONG)(XST_SUCCESS);
+		InstancePtr->RecvHandler = ((XEmacPs_Handler)(void *)FuncPointer);
+		InstancePtr->RecvRef = CallBackRef;
+		break;
+	case XEMACPS_HANDLER_ERROR:
+		Status = (LONG)(XST_SUCCESS);
+		InstancePtr->ErrorHandler = ((XEmacPs_ErrHandler)(void *)FuncPointer);
+		InstancePtr->ErrorRef = CallBackRef;
+		break;
+	default:
+		Status = (LONG)(XST_INVALID_PARAM);
+		break;
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+* Master interrupt handler for EMAC driver. This routine will query the
+* status of the device, bump statistics, and invoke user callbacks.
+*
+* This routine must be connected to an interrupt controller using OS/BSP
+* specific methods.
+*
+* @param XEmacPsPtr is a pointer to the XEMACPS instance that has caused the
+*        interrupt.
+*
+******************************************************************************/
+void XEmacPs_IntrHandler(void *XEmacPsPtr)
+{
+	u32 RegISR;
+	u32 RegSR;
+	u32 RegCtrl;
+	u32 RegQ1ISR = 0U;
+	XEmacPs *InstancePtr = (XEmacPs *) XEmacPsPtr;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/* This ISR will try to handle as many interrupts as it can in a single
+	 * call. However, in most of the places where the user's error handler
+         * is called, this ISR exits because it is expected that the user will
+         * reset the device in nearly all instances.
+	 */
+	RegISR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_ISR_OFFSET);
+
+	/* Read Transmit Q1 ISR */
+
+	if (InstancePtr->Version > 2)
+		RegQ1ISR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_INTQ1_STS_OFFSET);
+
+	/* Clear the interrupt status register */
+	XEmacPs_WriteReg(InstancePtr->Config.BaseAddress, XEMACPS_ISR_OFFSET,
+			   RegISR);
+
+	/* Receive complete interrupt */
+	if ((RegISR & XEMACPS_IXR_FRAMERX_MASK) != 0x00000000U) {
+		/* Clear RX status register RX complete indication but preserve
+		 * error bits if there is any */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_RXSR_OFFSET,
+				   ((u32)XEMACPS_RXSR_FRAMERX_MASK |
+				   (u32)XEMACPS_RXSR_BUFFNA_MASK));
+		InstancePtr->RecvHandler(InstancePtr->RecvRef);
+	}
+
+	/* Transmit Q1 complete interrupt */
+	if ((InstancePtr->Version > 2) &&
+			((RegQ1ISR & XEMACPS_INTQ1SR_TXCOMPL_MASK) != 0x00000000U)) {
+		/* Clear TX status register TX complete indication but preserve
+		 * error bits if there is any */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_INTQ1_STS_OFFSET,
+				   XEMACPS_INTQ1SR_TXCOMPL_MASK);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_TXSR_OFFSET,
+				   ((u32)XEMACPS_TXSR_TXCOMPL_MASK |
+				   (u32)XEMACPS_TXSR_USEDREAD_MASK));
+		InstancePtr->SendHandler(InstancePtr->SendRef);
+	}
+
+	/* Transmit complete interrupt */
+	if ((RegISR & XEMACPS_IXR_TXCOMPL_MASK) != 0x00000000U) {
+		/* Clear TX status register TX complete indication but preserve
+		 * error bits if there is any */
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_TXSR_OFFSET,
+				   ((u32)XEMACPS_TXSR_TXCOMPL_MASK |
+				   (u32)XEMACPS_TXSR_USEDREAD_MASK));
+		InstancePtr->SendHandler(InstancePtr->SendRef);
+	}
+
+	/* Receive error conditions interrupt */
+	if ((RegISR & XEMACPS_IXR_RX_ERR_MASK) != 0x00000000U) {
+		/* Clear RX status register */
+		RegSR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XEMACPS_RXSR_OFFSET);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_RXSR_OFFSET, RegSR);
+
+		/* Fix for CR # 692702. Write to bit 18 of net_ctrl
+		 * register to flush a packet out of Rx SRAM upon
+		 * an error for receive buffer not available. */
+		if ((RegISR & XEMACPS_IXR_RXUSED_MASK) != 0x00000000U) {
+			RegCtrl =
+			XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+						XEMACPS_NWCTRL_OFFSET);
+			RegCtrl |= (u32)XEMACPS_NWCTRL_FLUSH_DPRAM_MASK;
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+					XEMACPS_NWCTRL_OFFSET, RegCtrl);
+		}
+
+		if(RegSR != 0) {
+			InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
+						XEMACPS_RECV, RegSR);
+		}
+	}
+
+        /* When XEMACPS_IXR_TXCOMPL_MASK is flaged, XEMACPS_IXR_TXUSED_MASK
+         * will be asserted the same time.
+         * Have to distinguish this bit to handle the real error condition.
+         */
+	/* Transmit Q1 error conditions interrupt */
+        if ((InstancePtr->Version > 2) &&
+			((RegQ1ISR & XEMACPS_INTQ1SR_TXERR_MASK) != 0x00000000U) &&
+            ((RegQ1ISR & XEMACPS_INTQ1SR_TXCOMPL_MASK) != 0x00000000U)) {
+			/* Clear Interrupt Q1 status register */
+			XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_INTQ1_STS_OFFSET, RegQ1ISR);
+			InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XEMACPS_SEND,
+					  RegQ1ISR);
+	   }
+
+	/* Transmit error conditions interrupt */
+        if (((RegISR & XEMACPS_IXR_TX_ERR_MASK) != 0x00000000U) &&
+            (!(RegISR & XEMACPS_IXR_TXCOMPL_MASK) != 0x00000000U)) {
+		/* Clear TX status register */
+		RegSR = XEmacPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XEMACPS_TXSR_OFFSET);
+		XEmacPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XEMACPS_TXSR_OFFSET, RegSR);
+		InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XEMACPS_SEND,
+					  RegSR);
+	}
+
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_sinit.c
new file mode 100644
index 000000000..1bc5b3b19
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/emacps_v3_2/src/xemacps_sinit.c
@@ -0,0 +1,97 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemacps_sinit.c
+* @addtogroup emacps_v3_1
+* @{
+*
+* This file contains lookup method by device ID when success, it returns
+* pointer to config table to be used to initialize the device.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a wsy  01/10/10 New
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xemacps.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+/*************************** Variable Definitions *****************************/
+extern XEmacPs_Config XEmacPs_ConfigTable[XPAR_XEMACPS_NUM_INSTANCES];
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+* Lookup the device configuration based on the unique device ID.  The table
+* contains the configuration info for each device in the system.
+*
+* @param DeviceId is the unique device ID of the device being looked up.
+*
+* @return
+* A pointer to the configuration table entry corresponding to the given
+* device ID, or NULL if no match is found.
+*
+******************************************************************************/
+XEmacPs_Config *XEmacPs_LookupConfig(u16 DeviceId)
+{
+	XEmacPs_Config *CfgPtr = NULL;
+	u32 i;
+
+	for (i = 0U; i < (u32)XPAR_XEMACPS_NUM_INSTANCES; i++) {
+		if (XEmacPs_ConfigTable[i].DeviceId == DeviceId) {
+			CfgPtr = &XEmacPs_ConfigTable[i];
+			break;
+		}
+	}
+
+	return (XEmacPs_Config *)(CfgPtr);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/Makefile
new file mode 100644
index 000000000..8601ce4c7
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xgpiops_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling gpiops"
+
+xgpiops_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xgpiops_includes
+
+xgpiops_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops.c
new file mode 100644
index 000000000..90eedb87d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops.c
@@ -0,0 +1,628 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xgpiops.c
+* @addtogroup gpiops_v3_1
+* @{
+*
+* The XGpioPs driver. Functions in this file are the minimum required functions
+* for this driver. See xgpiops.h for a detailed description of the driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a sv   01/15/10 First Release
+* 1.01a sv   04/15/12 Removed the APIs XGpioPs_SetMode, XGpioPs_SetModePin
+*                     XGpioPs_GetMode, XGpioPs_GetModePin as they are not
+*		      relevant to Zynq device. The interrupts are disabled
+*		      for output pins on all banks during initialization.
+* 2.1   hk   04/29/14 Use Input data register DATA_RO for read. CR# 771667.
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn  04/13/15 Add support for Zynq Ultrascale+ MP. CR# 856980.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xgpiops.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+
+/************************** Function Prototypes ******************************/
+
+extern void StubHandler(void *CallBackRef, u32 Bank, u32 Status);
+
+/*****************************************************************************/
+/*
+*
+* This function initializes a XGpioPs instance/driver.
+* All members of the XGpioPs instance structure are initialized and
+* StubHandlers are assigned to the Bank Status Handlers.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	ConfigPtr points to the XGpioPs device configuration structure.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. If the address translation is not used then the
+*		physical address should be passed.
+*		Unexpected errors may occur if the address mapping is changed
+*		after this function is invoked.
+*
+* @return	XST_SUCCESS always.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XGpioPs_CfgInitialize(XGpioPs *InstancePtr, XGpioPs_Config *ConfigPtr,
+				u32 EffectiveAddr)
+{
+	s32 Status = XST_SUCCESS;
+	u8 i;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+	Xil_AssertNonvoid(EffectiveAddr != (u32)0);
+	/*
+	 * Set some default values for instance data, don't indicate the device
+	 * is ready to use until everything has been initialized successfully.
+	 */
+	InstancePtr->IsReady = 0U;
+	InstancePtr->GpioConfig.BaseAddr = EffectiveAddr;
+	InstancePtr->GpioConfig.DeviceId = ConfigPtr->DeviceId;
+	InstancePtr->Handler = StubHandler;
+	InstancePtr->Platform = XGetPlatform_Info();
+
+	/* Initialize the Bank data based on platform */
+	if (InstancePtr->Platform == XPLAT_ZYNQ_ULTRA_MP) {
+		/*
+		 *	Max pins in the ZynqMP GPIO device
+		 *	0 - 25,  Bank 0
+		 *	26 - 51, Bank 1
+		 *	52 - 77, Bank 2
+		 *	78 - 109, Bank 3
+		 *	110 - 141, Bank 4
+		 *	142 - 173, Bank 5
+		 */
+		InstancePtr->MaxPinNum = (u32)174;
+		InstancePtr->MaxBanks = (u8)6;
+	} else {
+		/*
+		 *	Max pins in the GPIO device
+		 *	0 - 31,  Bank 0
+		 *	32 - 53, Bank 1
+		 *	54 - 85, Bank 2
+		 *	86 - 117, Bank 3
+		 */
+		InstancePtr->MaxPinNum = (u32)118;
+		InstancePtr->MaxBanks = (u8)4;
+	}
+
+	/*
+	 * By default, interrupts are not masked in GPIO. Disable
+	 * interrupts for all pins in all the 4 banks.
+	 */
+	for (i=0;iMaxBanks;i++) {
+		XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+					  ((u32)(i) * XGPIOPS_REG_MASK_OFFSET) +
+					  XGPIOPS_INTDIS_OFFSET, 0xFFFFFFFFU);
+	}
+
+	/* Indicate the component is now ready to use. */
+	InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* Read the Data register of the specified GPIO bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+*
+* @return	Current value of the Data register.
+*
+* @note		This function is used for reading the state of all the GPIO pins
+*		of specified bank.
+*
+*****************************************************************************/
+u32 XGpioPs_Read(XGpioPs *InstancePtr, u8 Bank)
+{
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Bank < InstancePtr->MaxBanks);
+
+	return XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				 ((u32)(Bank) * XGPIOPS_DATA_BANK_OFFSET) +
+				 XGPIOPS_DATA_RO_OFFSET);
+}
+
+/****************************************************************************/
+/**
+*
+* Read Data from the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the data has to be read.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*		See xgpiops.h for the mapping of the pin numbers in the banks.
+*
+* @return	Current value of the Pin (0 or 1).
+*
+* @note		This function is used for reading the state of the specified
+*		GPIO pin.
+*
+*****************************************************************************/
+u32 XGpioPs_ReadPin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	return (XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				 ((u32)(Bank) * XGPIOPS_DATA_BANK_OFFSET) +
+				 XGPIOPS_DATA_RO_OFFSET) >> (u32)PinNumber) & (u32)1;
+
+}
+
+/****************************************************************************/
+/**
+*
+* Write to the Data register of the specified GPIO bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	Data is the value to be written to the Data register.
+*
+* @return	None.
+*
+* @note		This function is used for writing to all the GPIO pins of
+*		the bank. The previous state of the pins is not maintained.
+*
+*****************************************************************************/
+void XGpioPs_Write(XGpioPs *InstancePtr, u8 Bank, u32 Data)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_DATA_BANK_OFFSET) +
+			  XGPIOPS_DATA_OFFSET, Data);
+}
+
+/****************************************************************************/
+/**
+*
+* Write data to the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number to which the Data is to be written.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+* @param	Data is the data to be written to the specified pin (0 or 1).
+*
+* @return	None.
+*
+* @note		This function does a masked write to the specified pin of
+*		the specified GPIO bank. The previous state of other pins
+*		is maintained.
+*
+*****************************************************************************/
+void XGpioPs_WritePin(XGpioPs *InstancePtr, u32 Pin, u32 Data)
+{
+	u32 RegOffset;
+	u32 Value;
+	u8 Bank;
+	u8 PinNumber;
+	u32 DataVar = Data;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	if (PinNumber > 15U) {
+		/* There are only 16 data bits in bit maskable register. */
+		PinNumber -= (u8)16;
+		RegOffset = XGPIOPS_DATA_MSW_OFFSET;
+	} else {
+		RegOffset = XGPIOPS_DATA_LSW_OFFSET;
+	}
+
+	/*
+	 * Get the 32 bit value to be written to the Mask/Data register where
+	 * the upper 16 bits is the mask and lower 16 bits is the data.
+	 */
+	DataVar &= (u32)0x01;
+	Value = ~((u32)1 << (PinNumber + 16U)) & ((DataVar << PinNumber) | 0xFFFF0000U);
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_DATA_MASK_OFFSET) +
+			  RegOffset, Value);
+}
+
+
+
+/****************************************************************************/
+/**
+*
+* Set the Direction of the pins of the specified GPIO Bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	Direction is the 32 bit mask of the Pin direction to be set for
+*		all the pins in the Bank. Bits with 0 are set to Input mode,
+*		bits with 1 are	set to Output Mode.
+*
+* @return	None.
+*
+* @note		This function is used for setting the direction of all the pins
+*		in the specified bank. The previous state of the pins is
+*		not maintained.
+*
+*****************************************************************************/
+void XGpioPs_SetDirection(XGpioPs *InstancePtr, u8 Bank, u32 Direction)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_DIRM_OFFSET, Direction);
+}
+
+/****************************************************************************/
+/**
+*
+* Set the Direction of the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number to which the Data is to be written.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+* @param	Direction is the direction to be set for the specified pin.
+*		Valid values are 0 for Input Direction, 1 for Output Direction.
+*
+* @return	None.
+*
+*****************************************************************************/
+void XGpioPs_SetDirectionPin(XGpioPs *InstancePtr, u32 Pin, u32 Direction)
+{
+	u8 Bank;
+	u8 PinNumber;
+	u32 DirModeReg;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Pin < InstancePtr->MaxPinNum);
+	Xil_AssertVoid(Direction <= (u32)1);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	DirModeReg = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				      ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				      XGPIOPS_DIRM_OFFSET);
+
+	if (Direction!=(u32)0) { /*  Output Direction */
+		DirModeReg |= ((u32)1 << (u32)PinNumber);
+	} else { /* Input Direction */
+		DirModeReg &= ~ ((u32)1 << (u32)PinNumber);
+	}
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			 ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			 XGPIOPS_DIRM_OFFSET, DirModeReg);
+}
+
+/****************************************************************************/
+/**
+*
+* Get the Direction of the pins of the specified GPIO Bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+*
+* return	Returns a 32 bit mask of the Direction register. Bits with 0 are
+*		in Input mode, bits with 1 are in Output Mode.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_GetDirection(XGpioPs *InstancePtr, u8 Bank)
+{
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Bank < InstancePtr->MaxBanks);
+
+	return XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				XGPIOPS_DIRM_OFFSET);
+}
+
+/****************************************************************************/
+/**
+*
+* Get the Direction of the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the Direction is to be
+*		retrieved.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @return	Direction of the specified pin.
+*		- 0 for Input Direction
+*		- 1 for Output Direction
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_GetDirectionPin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	return (XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				 ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_DIRM_OFFSET) >> (u32)PinNumber) & (u32)1;
+}
+
+/****************************************************************************/
+/**
+*
+* Set the Output Enable of the pins of the specified GPIO Bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	OpEnable is the 32 bit mask of the Output Enables to be set for
+*		all the pins in the Bank. The Output Enable of bits with 0 are
+*		disabled, the Output Enable of bits with 1 are enabled.
+*
+* @return	None.
+*
+* @note		This function is used for setting the Output Enables of all the
+*		pins in the specified bank. The previous state of the Output
+*		Enables is not maintained.
+*
+*****************************************************************************/
+void XGpioPs_SetOutputEnable(XGpioPs *InstancePtr, u8 Bank, u32 OpEnable)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_OUTEN_OFFSET, OpEnable);
+}
+
+/****************************************************************************/
+/**
+*
+* Set the Output Enable of the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number to which the Data is to be written.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+* @param	OpEnable specifies whether the Output Enable for the specified
+*		pin should be enabled.
+*		Valid values are 0 for Disabling Output Enable,
+*		1 for Enabling Output Enable.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_SetOutputEnablePin(XGpioPs *InstancePtr, u32 Pin, u32 OpEnable)
+{
+	u8 Bank;
+	u8 PinNumber;
+	u32 OpEnableReg;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Pin < InstancePtr->MaxPinNum);
+	Xil_AssertVoid(OpEnable <= (u32)1);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	OpEnableReg = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				       ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				       XGPIOPS_OUTEN_OFFSET);
+
+	if (OpEnable != (u32)0) { /*  Enable Output Enable */
+		OpEnableReg |= ((u32)1 << (u32)PinNumber);
+	} else { /* Disable Output Enable */
+		OpEnableReg &= ~ ((u32)1 << (u32)PinNumber);
+	}
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_OUTEN_OFFSET, OpEnableReg);
+}
+/****************************************************************************/
+/**
+*
+* Get the Output Enable status of the pins of the specified GPIO Bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+*
+* return	Returns a a 32 bit mask of the Output Enable register.
+*		Bits with 0 are in Disabled state, bits with 1 are in
+*		Enabled State.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_GetOutputEnable(XGpioPs *InstancePtr, u8 Bank)
+{
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Bank < InstancePtr->MaxBanks);
+
+	return XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				XGPIOPS_OUTEN_OFFSET);
+}
+
+/****************************************************************************/
+/**
+*
+* Get the Output Enable status of the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the Output Enable status is to
+*		be retrieved.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @return	Output Enable of the specified pin.
+*		- 0 if Output Enable is disabled for this pin
+*		- 1 if Output Enable is enabled for this pin
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_GetOutputEnablePin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	return (XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				 ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_OUTEN_OFFSET) >> (u32)PinNumber) & (u32)1;
+}
+
+/****************************************************************************/
+/*
+*
+* Get the Bank number and the Pin number in the Bank, for the given PinNumber
+* in the GPIO device.
+*
+* @param	PinNumber is the Pin number in the GPIO device.
+* @param	BankNumber returns the Bank in which this GPIO pin is present.
+*		Valid values are 0 to XGPIOPS_MAX_BANKS - 1.
+* @param	PinNumberInBank returns the Pin Number within the Bank.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_GetBankPin(u8 PinNumber, u8 *BankNumber, u8 *PinNumberInBank)
+{
+	u32 XGpioPsPinTable[6] = {0};
+	u32 Platform = XGetPlatform_Info();
+
+	if (Platform == XPLAT_ZYNQ_ULTRA_MP) {
+		/*
+		 * This structure defines the mapping of the pin numbers to the banks when
+		 * the driver APIs are used for working on the individual pins.
+		 */
+
+		XGpioPsPinTable[0] = (u32)25; /* 0 - 25, Bank 0 */
+		XGpioPsPinTable[1] = (u32)51; /* 26 - 51, Bank 1 */
+		XGpioPsPinTable[2] = (u32)77; /* 52 - 77, Bank 2 */
+		XGpioPsPinTable[3] = (u32)109; /* 78 - 109, Bank 3 */
+		XGpioPsPinTable[4] = (u32)141; /* 110 - 141, Bank 4 */
+		XGpioPsPinTable[5] = (u32)173; /* 142 - 173 Bank 5 */
+
+		*BankNumber = 0U;
+		while (*BankNumber < 6U) {
+			if (PinNumber <= XGpioPsPinTable[*BankNumber]) {
+				break;
+			}
+			(*BankNumber)++;
+		}
+	} else {
+		XGpioPsPinTable[0] = (u32)31; /* 0 - 31, Bank 0 */
+		XGpioPsPinTable[1] = (u32)53; /* 32 - 53, Bank 1 */
+		XGpioPsPinTable[2] = (u32)85; /* 54 - 85, Bank 2 */
+		XGpioPsPinTable[3] = (u32)117; /* 86 - 117 Bank 3 */
+
+		*BankNumber = 0U;
+		while (*BankNumber < 4U) {
+			if (PinNumber <= XGpioPsPinTable[*BankNumber]) {
+				break;
+			}
+			(*BankNumber)++;
+		}
+	}
+	if (*BankNumber == (u8)0) {
+		*PinNumberInBank = PinNumber;
+	} else {
+		*PinNumberInBank = (u8)((u32)PinNumber %
+					(XGpioPsPinTable[*BankNumber - (u8)1] + (u32)1));
+	}
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops.h
new file mode 100644
index 000000000..102615572
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops.h
@@ -0,0 +1,268 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xgpiops.h
+* @addtogroup gpiops_v3_1
+* @{
+* @details
+*
+* The Xilinx PS GPIO driver. This driver supports the Xilinx PS GPIO
+* Controller.
+*
+* The GPIO Controller supports the following features:
+*	- 4 banks
+*	- Masked writes (There are no masked reads)
+*	- Bypass mode
+*	- Configurable Interrupts (Level/Edge)
+*
+* This driver is intended to be RTOS and processor independent. Any needs for
+* dynamic memory management, threads or thread mutual exclusion, virtual
+* memory, or cache control must be satisfied by the layer above this driver.
+
+* This driver supports all the features listed above, if applicable.
+*
+* Driver Description
+*
+* The device driver enables higher layer software (e.g., an application) to
+* communicate to the GPIO.
+*
+* Interrupts
+*
+* The driver provides interrupt management functions and an interrupt handler.
+* Users of this driver need to provide callback functions. An interrupt handler
+* example is available with the driver.
+*
+* Threads
+*
+* This driver is not thread safe. Any needs for threads or thread mutual
+* exclusion must be satisfied by the layer above this driver.
+*
+* Asserts
+*
+* Asserts are used within all Xilinx drivers to enforce constraints on argument
+* values. Asserts can be turned off on a system-wide basis by defining, at
+* compile time, the NDEBUG identifier. By default, asserts are turned on and it
+* is recommended that users leave asserts on during development.
+*
+* Building the driver
+*
+* The XGpioPs driver is composed of several source files. This allows the user
+* to build and link only those parts of the driver that are necessary.
+* 


+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a sv   01/15/10 First Release
+* 1.01a sv   04/15/12 Removed the APIs XGpioPs_SetMode, XGpioPs_SetModePin
+*                     XGpioPs_GetMode, XGpioPs_GetModePin as they are not
+*		      relevant to Zynq device.The interrupts are disabled
+*		      for output pins on all banks during initialization.
+* 1.02a hk   08/22/13 Added low level reset API
+* 2.1   hk   04/29/14 Use Input data register DATA_RO for read. CR# 771667.
+* 2.2	sk	 10/13/14 Used Pin number in Bank instead of pin number
+* 					  passed to APIs. CR# 822636
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn  04/13/15 Add support for Zynq Ultrascale+ MP. CR# 856980.
+*
+* 

+*
+******************************************************************************/
+#ifndef XGPIOPS_H		/* prevent circular inclusions */
+#define XGPIOPS_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xgpiops_hw.h"
+#include "xplatform_info.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Interrupt types
+ *  @{
+ * The following constants define the interrupt types that can be set for each
+ * GPIO pin.
+ */
+#define XGPIOPS_IRQ_TYPE_EDGE_RISING	0x00U  /**< Interrupt on Rising edge */
+#define XGPIOPS_IRQ_TYPE_EDGE_FALLING	0x01U  /**< Interrupt Falling edge */
+#define XGPIOPS_IRQ_TYPE_EDGE_BOTH	0x02U  /**< Interrupt on both edges */
+#define XGPIOPS_IRQ_TYPE_LEVEL_HIGH	0x03U  /**< Interrupt on high level */
+#define XGPIOPS_IRQ_TYPE_LEVEL_LOW	0x04U  /**< Interrupt on low level */
+/*@}*/
+
+#define XGPIOPS_BANK_MAX_PINS		(u32)32 /**< Max pins in a GPIO bank */
+#define XGPIOPS_BANK0			0x00U  /**< GPIO Bank 0 */
+#define XGPIOPS_BANK1			0x01U  /**< GPIO Bank 1 */
+#define XGPIOPS_BANK2			0x02U  /**< GPIO Bank 2 */
+#define XGPIOPS_BANK3			0x03U  /**< GPIO Bank 3 */
+
+#ifdef XPAR_PSU_GPIO_0_BASEADDR
+#define XGPIOPS_BANK4			0x04U  /**< GPIO Bank 4 */
+#define XGPIOPS_BANK5			0x05U  /**< GPIO Bank 5 */
+#endif
+
+#define XGPIOPS_MAX_BANKS_ZYNQMP		0x06U  /**< Max banks in a
+										*	Zynq Ultrascale+ MP GPIO device
+										*/
+#define XGPIOPS_MAX_BANKS		0x04U  /**< Max banks in a Zynq GPIO device */
+
+#define XGPIOPS_DEVICE_MAX_PIN_NUM_ZYNQMP	(u32)174 /**< Max pins in the
+						  *	Zynq Ultrascale+ MP GPIO device
+					      * 0 - 25,  Bank 0
+					      * 26 - 51, Bank 1
+					      *	52 - 77, Bank 2
+					      *	78 - 109, Bank 3
+					      *	110 - 141, Bank 4
+					      *	142 - 173, Bank 5
+					      */
+#define XGPIOPS_DEVICE_MAX_PIN_NUM	(u32)118 /**< Max pins in the Zynq GPIO device
+					      * 0 - 31,  Bank 0
+					      * 32 - 53, Bank 1
+					      *	54 - 85, Bank 2
+					      *	86 - 117, Bank 3
+					      */
+
+/**************************** Type Definitions *******************************/
+
+/****************************************************************************/
+/**
+ * This handler data type allows the user to define a callback function to
+ * handle the interrupts for the GPIO device. The application using this
+ * driver is expected to define a handler of this type, to support interrupt
+ * driven mode. The handler executes in an interrupt context such that minimal
+ * processing should be performed.
+ *
+ * @param	CallBackRef is a callback reference passed in by the upper layer
+ *		when setting the callback functions for a GPIO bank. It is
+ *		passed back to the upper layer when the callback is invoked. Its
+ *		type is not important to the driver component, so it is a void
+ *		pointer.
+ * @param	Bank is the bank for which the interrupt status has changed.
+ * @param	Status is the Interrupt status of the GPIO bank.
+ *
+ *****************************************************************************/
+typedef void (*XGpioPs_Handler) (void *CallBackRef, u32 Bank, u32 Status);
+
+/**
+ * This typedef contains configuration information for a device.
+ */
+typedef struct {
+	u16 DeviceId;		/**< Unique ID of device */
+	u32 BaseAddr;		/**< Register base address */
+} XGpioPs_Config;
+
+/**
+ * The XGpioPs driver instance data. The user is required to allocate a
+ * variable of this type for the GPIO device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+	XGpioPs_Config GpioConfig;	/**< Device configuration */
+	u32 IsReady;			/**< Device is initialized and ready */
+	XGpioPs_Handler Handler;	/**< Status handlers for all banks */
+	void *CallBackRef; 		/**< Callback ref for bank handlers */
+	u32 Platform;			/**< Platform data */
+	u32 MaxPinNum;			/**< Max pins in the GPIO device */
+	u8 MaxBanks;			/**< Max banks in a GPIO device */
+} XGpioPs;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/* Functions in xgpiops.c */
+s32 XGpioPs_CfgInitialize(XGpioPs *InstancePtr, XGpioPs_Config *ConfigPtr,
+			   u32 EffectiveAddr);
+
+/* Bank APIs in xgpiops.c */
+u32 XGpioPs_Read(XGpioPs *InstancePtr, u8 Bank);
+void XGpioPs_Write(XGpioPs *InstancePtr, u8 Bank, u32 Data);
+void XGpioPs_SetDirection(XGpioPs *InstancePtr, u8 Bank, u32 Direction);
+u32 XGpioPs_GetDirection(XGpioPs *InstancePtr, u8 Bank);
+void XGpioPs_SetOutputEnable(XGpioPs *InstancePtr, u8 Bank, u32 OpEnable);
+u32 XGpioPs_GetOutputEnable(XGpioPs *InstancePtr, u8 Bank);
+void XGpioPs_GetBankPin(u8 PinNumber,	u8 *BankNumber, u8 *PinNumberInBank);
+
+/* Pin APIs in xgpiops.c */
+u32 XGpioPs_ReadPin(XGpioPs *InstancePtr, u32 Pin);
+void XGpioPs_WritePin(XGpioPs *InstancePtr, u32 Pin, u32 Data);
+void XGpioPs_SetDirectionPin(XGpioPs *InstancePtr, u32 Pin, u32 Direction);
+u32 XGpioPs_GetDirectionPin(XGpioPs *InstancePtr, u32 Pin);
+void XGpioPs_SetOutputEnablePin(XGpioPs *InstancePtr, u32 Pin, u32 OpEnable);
+u32 XGpioPs_GetOutputEnablePin(XGpioPs *InstancePtr, u32 Pin);
+
+/* Diagnostic functions in xgpiops_selftest.c */
+s32 XGpioPs_SelfTest(XGpioPs *InstancePtr);
+
+/* Functions in xgpiops_intr.c */
+/* Bank APIs in xgpiops_intr.c */
+void XGpioPs_IntrEnable(XGpioPs *InstancePtr, u8 Bank, u32 Mask);
+void XGpioPs_IntrDisable(XGpioPs *InstancePtr, u8 Bank, u32 Mask);
+u32 XGpioPs_IntrGetEnabled(XGpioPs *InstancePtr, u8 Bank);
+u32 XGpioPs_IntrGetStatus(XGpioPs *InstancePtr, u8 Bank);
+void XGpioPs_IntrClear(XGpioPs *InstancePtr, u8 Bank, u32 Mask);
+void XGpioPs_SetIntrType(XGpioPs *InstancePtr, u8 Bank, u32 IntrType,
+			  u32 IntrPolarity, u32 IntrOnAny);
+void XGpioPs_GetIntrType(XGpioPs *InstancePtr, u8 Bank, u32 *IntrType,
+			  u32 *IntrPolarity, u32 *IntrOnAny);
+void XGpioPs_SetCallbackHandler(XGpioPs *InstancePtr, void *CallBackRef,
+			     XGpioPs_Handler FuncPointer);
+void XGpioPs_IntrHandler(XGpioPs *InstancePtr);
+
+/* Pin APIs in xgpiops_intr.c */
+void XGpioPs_SetIntrTypePin(XGpioPs *InstancePtr, u32 Pin, u8 IrqType);
+u8 XGpioPs_GetIntrTypePin(XGpioPs *InstancePtr, u32 Pin);
+
+void XGpioPs_IntrEnablePin(XGpioPs *InstancePtr, u32 Pin);
+void XGpioPs_IntrDisablePin(XGpioPs *InstancePtr, u32 Pin);
+u32 XGpioPs_IntrGetEnabledPin(XGpioPs *InstancePtr, u32 Pin);
+u32 XGpioPs_IntrGetStatusPin(XGpioPs *InstancePtr, u32 Pin);
+void XGpioPs_IntrClearPin(XGpioPs *InstancePtr, u32 Pin);
+
+/* Functions in xgpiops_sinit.c */
+XGpioPs_Config *XGpioPs_LookupConfig(u16 DeviceId);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_g.c
new file mode 100644
index 000000000..597b38a12
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_g.c
@@ -0,0 +1,55 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xgpiops.h"
+
+/*
+* The configuration table for devices
+*/
+
+XGpioPs_Config XGpioPs_ConfigTable[] =
+{
+	{
+		XPAR_PSU_GPIO_0_DEVICE_ID,
+		XPAR_PSU_GPIO_0_BASEADDR
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_hw.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_hw.c
new file mode 100644
index 000000000..d7a5e00f0
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_hw.c
@@ -0,0 +1,169 @@
+/******************************************************************************
+*
+* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xgpiops_hw.c
+* @addtogroup gpiops_v3_1
+* @{
+*
+* This file contains low level GPIO functions.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.02a hk   08/22/13 First Release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn  04/13/15 Add support for Zynq Ultrascale+ MP. CR# 856980.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xgpiops_hw.h"
+#include "xgpiops.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+
+/*****************************************************************************/
+/*
+*
+* This function resets the GPIO module by writing reset values to
+* all registers
+*
+* @param	Base address of GPIO module
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+void XGpioPs_ResetHw(u32 BaseAddress)
+{
+	u32 BankCount;
+	u32 Platform,MaxBanks;
+
+	Platform = XGetPlatform_Info();
+	if (Platform == XPLAT_ZYNQ_ULTRA_MP) {
+		MaxBanks = (u32)6;
+	} else {
+		MaxBanks = (u32)4;
+	}
+	/* Write reset values to all mask data registers */
+	for(BankCount = 2U; BankCount < (u32)MaxBanks; BankCount++) {
+
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_DATA_MASK_OFFSET) +
+				 XGPIOPS_DATA_LSW_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_DATA_MASK_OFFSET) +
+				 XGPIOPS_DATA_MSW_OFFSET), 0x0U);
+	}
+	/* Write reset values to all output data registers */
+	for(BankCount = 2U; BankCount < (u32)MaxBanks; BankCount++) {
+
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_DATA_BANK_OFFSET) +
+				 XGPIOPS_DATA_OFFSET), 0x0U);
+	}
+
+	/* Reset all registers of all GPIO banks */
+	for(BankCount = 0U; BankCount < (u32)MaxBanks; BankCount++) {
+
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_DIRM_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_OUTEN_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_INTMASK_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_INTEN_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_INTDIS_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_INTSTS_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_INTPOL_OFFSET), 0x0U);
+		XGpioPs_WriteReg(BaseAddress,
+				((BankCount * XGPIOPS_REG_MASK_OFFSET) +
+				 XGPIOPS_INTANY_OFFSET), 0x0U);
+	}
+
+	/* Bank 0 Int type */
+	XGpioPs_WriteReg(BaseAddress, XGPIOPS_INTTYPE_OFFSET,
+			XGPIOPS_INTTYPE_BANK0_RESET);
+	/* Bank 1 Int type */
+	XGpioPs_WriteReg(BaseAddress,
+			((u32)XGPIOPS_REG_MASK_OFFSET + (u32)XGPIOPS_INTTYPE_OFFSET),
+			XGPIOPS_INTTYPE_BANK1_RESET);
+	/* Bank 2 Int type */
+	XGpioPs_WriteReg(BaseAddress,
+			(((u32)2 * XGPIOPS_REG_MASK_OFFSET) + XGPIOPS_INTTYPE_OFFSET),
+			XGPIOPS_INTTYPE_BANK2_RESET);
+	/* Bank 3 Int type */
+	XGpioPs_WriteReg(BaseAddress,
+			(((u32)3 * XGPIOPS_REG_MASK_OFFSET) + XGPIOPS_INTTYPE_OFFSET),
+			XGPIOPS_INTTYPE_BANK3_RESET);
+
+	if (Platform == XPLAT_ZYNQ_ULTRA_MP) {
+		/* Bank 4 Int type */
+		XGpioPs_WriteReg(BaseAddress,
+				(((u32)4 * XGPIOPS_REG_MASK_OFFSET) + XGPIOPS_INTTYPE_OFFSET),
+				XGPIOPS_INTTYPE_BANK4_RESET);
+		/* Bank 5 Int type */
+		XGpioPs_WriteReg(BaseAddress,
+				(((u32)5 * XGPIOPS_REG_MASK_OFFSET) + XGPIOPS_INTTYPE_OFFSET),
+				XGPIOPS_INTTYPE_BANK5_RESET);
+	}
+
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_hw.h
new file mode 100644
index 000000000..81e8d6a9f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_hw.h
@@ -0,0 +1,164 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xgpiops_hw.h
+* @addtogroup gpiops_v3_1
+* @{
+*
+* This header file contains the identifiers and basic driver functions (or
+* macros) that can be used to access the device. Other driver functions
+* are defined in xgpiops.h.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------
+* 1.00a sv   01/15/10 First Release
+* 1.02a hk   08/22/13 Added low level reset API function prototype and
+*                     related constant definitions
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn  04/13/15 Corrected reset values of banks.
+* 

+*
+******************************************************************************/
+#ifndef XGPIOPS_HW_H		/* prevent circular inclusions */
+#define XGPIOPS_HW_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Register offsets for the GPIO. Each register is 32 bits.
+ *  @{
+ */
+#define XGPIOPS_DATA_LSW_OFFSET  0x00000000U  /* Mask and Data Register LSW, WO */
+#define XGPIOPS_DATA_MSW_OFFSET  0x00000004U  /* Mask and Data Register MSW, WO */
+#define XGPIOPS_DATA_OFFSET	 0x00000040U  /* Data Register, RW */
+#define XGPIOPS_DATA_RO_OFFSET	 0x00000060U  /* Data Register - Input, RO */
+#define XGPIOPS_DIRM_OFFSET	 0x00000204U  /* Direction Mode Register, RW */
+#define XGPIOPS_OUTEN_OFFSET	 0x00000208U  /* Output Enable Register, RW */
+#define XGPIOPS_INTMASK_OFFSET	 0x0000020CU  /* Interrupt Mask Register, RO */
+#define XGPIOPS_INTEN_OFFSET	 0x00000210U  /* Interrupt Enable Register, WO */
+#define XGPIOPS_INTDIS_OFFSET	 0x00000214U  /* Interrupt Disable Register, WO*/
+#define XGPIOPS_INTSTS_OFFSET	 0x00000218U  /* Interrupt Status Register, RO */
+#define XGPIOPS_INTTYPE_OFFSET	 0x0000021CU  /* Interrupt Type Register, RW */
+#define XGPIOPS_INTPOL_OFFSET	 0x00000220U  /* Interrupt Polarity Register, RW */
+#define XGPIOPS_INTANY_OFFSET	 0x00000224U  /* Interrupt On Any Register, RW */
+/* @} */
+
+/** @name Register offsets for each Bank.
+ *  @{
+ */
+#define XGPIOPS_DATA_MASK_OFFSET 0x00000008U  /* Data/Mask Registers offset */
+#define XGPIOPS_DATA_BANK_OFFSET 0x00000004U  /* Data Registers offset */
+#define XGPIOPS_REG_MASK_OFFSET  0x00000040U  /* Registers offset */
+/* @} */
+
+/* For backwards compatibility */
+#define XGPIOPS_BYPM_MASK_OFFSET	(u32)0x40
+
+/** @name Interrupt type reset values for each bank
+ *  @{
+ */
+#ifdef XPAR_PSU_GPIO_0_BASEADDR
+#define XGPIOPS_INTTYPE_BANK0_RESET  0x03FFFFFFU  /* Resets specific to Zynq Ultrascale+ MP */
+#define XGPIOPS_INTTYPE_BANK1_RESET  0x03FFFFFFU
+#define XGPIOPS_INTTYPE_BANK2_RESET  0x03FFFFFFU
+#else
+#define XGPIOPS_INTTYPE_BANK0_RESET  0xFFFFFFFFU  /* Resets specific to Zynq */
+#define XGPIOPS_INTTYPE_BANK1_RESET  0x003FFFFFU
+#define XGPIOPS_INTTYPE_BANK2_RESET  0xFFFFFFFFU
+#endif
+
+#define XGPIOPS_INTTYPE_BANK3_RESET  0xFFFFFFFFU  /* Reset common to both platforms */
+#define XGPIOPS_INTTYPE_BANK4_RESET  0xFFFFFFFFU  /* Resets specific to Zynq Ultrascale+ MP */
+#define XGPIOPS_INTTYPE_BANK5_RESET  0xFFFFFFFFU
+/* @} */
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* This macro reads the given register.
+*
+* @param	BaseAddr is the base address of the device.
+* @param	RegOffset is the register offset to be read.
+*
+* @return	The 32-bit value of the register
+*
+* @note		None.
+*
+*****************************************************************************/
+#define XGpioPs_ReadReg(BaseAddr, RegOffset)		\
+		Xil_In32((BaseAddr) + (u32)(RegOffset))
+
+/****************************************************************************/
+/**
+*
+* This macro writes to the given register.
+*
+* @param	BaseAddr is the base address of the device.
+* @param	RegOffset is the offset of the register to be written.
+* @param	Data is the 32-bit value to write to the register.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+#define XGpioPs_WriteReg(BaseAddr, RegOffset, Data)	\
+		Xil_Out32((BaseAddr) + (u32)(RegOffset), (u32)(Data))
+
+/************************** Function Prototypes ******************************/
+
+void XGpioPs_ResetHw(u32 BaseAddress);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XGPIOPS_HW_H */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_intr.c
new file mode 100644
index 000000000..c07381be6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_intr.c
@@ -0,0 +1,731 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xgpiops_intr.c
+* @addtogroup gpiops_v3_1
+* @{
+*
+* This file contains functions related to GPIO interrupt handling.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a sv   01/18/10 First Release
+* 2.2	sk	 10/13/14 Used Pin number in Bank instead of pin number
+* 					  passed to API's. CR# 822636
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn  04/13/15 Add support for Zynq Ultrascale+ MP. CR# 856980.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xgpiops.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+void StubHandler(void *CallBackRef, u32 Bank, u32 Status);
+
+/****************************************************************************/
+/**
+*
+* This function enables the interrupts for the specified pins in the specified
+* bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	Mask is the bit mask of the pins for which interrupts are to
+*		be enabled. Bit positions of 1 will be enabled. Bit positions
+*		of 0 will keep the previous setting.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_IntrEnable(XGpioPs *InstancePtr, u8 Bank, u32 Mask)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTEN_OFFSET, Mask);
+}
+
+/****************************************************************************/
+/**
+*
+* This function enables the interrupt for the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the interrupt is to be enabled.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_IntrEnablePin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+	u32 IntrReg = 0U;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	IntrReg = ((u32)1 << (u32)PinNumber);
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTEN_OFFSET, IntrReg);
+}
+
+/****************************************************************************/
+/**
+*
+* This function disables the interrupts for the specified pins in the specified
+* bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	Mask is the bit mask of the pins for which interrupts are
+*		to be disabled. Bit positions of 1 will be disabled. Bit
+*		positions of 0 will keep the previous setting.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_IntrDisable(XGpioPs *InstancePtr, u8 Bank, u32 Mask)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTDIS_OFFSET, Mask);
+}
+
+/****************************************************************************/
+/**
+*
+* This function disables the interrupts for the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the interrupt is to be disabled.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_IntrDisablePin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+	u32 IntrReg = 0U;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	IntrReg =  ((u32)1 << (u32)PinNumber);
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTDIS_OFFSET, IntrReg);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the interrupt enable status for a bank.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+*
+* @return	Enabled interrupt(s) in a 32-bit format. Bit positions with 1
+*		indicate that the interrupt for that pin is enabled, bit
+*		positions with 0 indicate that the interrupt for that pin is
+*		disabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_IntrGetEnabled(XGpioPs *InstancePtr, u8 Bank)
+{
+	u32 IntrMask;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Bank < InstancePtr->MaxBanks);
+
+	IntrMask = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				    ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				    XGPIOPS_INTMASK_OFFSET);
+	return (~IntrMask);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns whether interrupts are enabled for the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the interrupt enable status
+*		is to be known.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @return
+*		- TRUE if the interrupt is enabled.
+*		- FALSE if the interrupt is disabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_IntrGetEnabledPin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+	u32 IntrReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	IntrReg  = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				    ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				    XGPIOPS_INTMASK_OFFSET);
+
+	return (((IntrReg & ((u32)1 << PinNumber)) != (u32)0)? FALSE : TRUE);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns interrupt status read from Interrupt Status Register.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+*
+* @return	The value read from Interrupt Status Register.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_IntrGetStatus(XGpioPs *InstancePtr, u8 Bank)
+{
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Bank < InstancePtr->MaxBanks);
+
+	return XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				XGPIOPS_INTSTS_OFFSET);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns interrupt enable status of the specified pin.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the interrupt enable status
+*		is to be known.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @return
+*		- TRUE if the interrupt has occurred.
+*		- FALSE if the interrupt has not occurred.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XGpioPs_IntrGetStatusPin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+	u32 IntrReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	IntrReg = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				   ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				   XGPIOPS_INTSTS_OFFSET);
+
+	return (((IntrReg & ((u32)1 << PinNumber)) != (u32)0)? TRUE : FALSE);
+}
+
+/****************************************************************************/
+/**
+*
+* This function clears pending interrupt(s) with the provided mask. This
+* function should be called after the software has serviced the interrupts
+* that are pending.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	Mask is the mask of the interrupts to be cleared. Bit positions
+*		of 1 will be cleared. Bit positions of 0 will not change the
+*		previous interrupt status.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_IntrClear(XGpioPs *InstancePtr, u8 Bank, u32 Mask)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	/* Clear the currently pending interrupts. */
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTSTS_OFFSET, Mask);
+}
+
+/****************************************************************************/
+/**
+*
+* This function clears the specified pending interrupt. This function should be
+* called after the software has serviced the interrupts that are pending.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	Pin is the pin number for which the interrupt status is to be
+*		cleared. Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_IntrClearPin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u8 Bank;
+	u8 PinNumber;
+	u32 IntrReg;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	/* Clear the specified pending interrupts. */
+	IntrReg = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				   ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				   XGPIOPS_INTSTS_OFFSET);
+
+	IntrReg &= ((u32)1 << PinNumber);
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTSTS_OFFSET, IntrReg);
+}
+
+/****************************************************************************/
+/**
+*
+* This function is used for setting the Interrupt Type, Interrupt Polarity and
+* Interrupt On Any for the specified GPIO Bank pins.
+*
+* @param	InstancePtr is a pointer to an XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	IntrType is the 32 bit mask of the interrupt type.
+*		0 means Level Sensitive and 1 means Edge Sensitive.
+* @param	IntrPolarity is the 32 bit mask of the interrupt polarity.
+*		0 means Active Low or Falling Edge and 1 means Active High or
+*		Rising Edge.
+* @param	IntrOnAny is the 32 bit mask of the interrupt trigger for
+*		edge triggered interrupts. 0 means trigger on single edge using
+*		the configured interrupt polarity and 1 means  trigger on both
+*		edges.
+*
+* @return	None.
+*
+* @note		This function is used for setting the interrupt related
+*		properties of all the pins in the specified bank. The previous
+*		state of the pins is not maintained.
+*		To change the Interrupt properties of a single GPIO pin, use the
+*		function XGpioPs_SetPinIntrType().
+*
+*****************************************************************************/
+void XGpioPs_SetIntrType(XGpioPs *InstancePtr, u8 Bank, u32 IntrType,
+			  u32 IntrPolarity, u32 IntrOnAny)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTTYPE_OFFSET, IntrType);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTPOL_OFFSET, IntrPolarity);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTANY_OFFSET, IntrOnAny);
+}
+
+/****************************************************************************/
+/**
+*
+* This function is used for getting the Interrupt Type, Interrupt Polarity and
+* Interrupt On Any for the specified GPIO Bank pins.
+*
+* @param	InstancePtr is a pointer to an XGpioPs instance.
+* @param	Bank is the bank number of the GPIO to operate on.
+*		Valid values are 0-3 in Zynq and 0-5 in Zynq Ultrascale+ MP.
+* @param	IntrType returns the 32 bit mask of the interrupt type.
+*		0 means Level Sensitive and 1 means Edge Sensitive.
+* @param	IntrPolarity returns the 32 bit mask of the interrupt
+*		polarity. 0 means Active Low or Falling Edge and 1 means
+*		Active High or Rising Edge.
+* @param	IntrOnAny returns the 32 bit mask of the interrupt trigger for
+*		edge triggered interrupts. 0 means trigger on single edge using
+*		the configured interrupt polarity and 1 means trigger on both
+*		edges.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_GetIntrType(XGpioPs *InstancePtr, u8 Bank, u32 *IntrType,
+			  u32 *IntrPolarity, u32 *IntrOnAny)
+
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Bank < InstancePtr->MaxBanks);
+
+	*IntrType = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				     ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				     XGPIOPS_INTTYPE_OFFSET);
+
+	*IntrPolarity = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+					 ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+					 XGPIOPS_INTPOL_OFFSET);
+
+	*IntrOnAny = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				      ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				      XGPIOPS_INTANY_OFFSET);
+}
+
+/****************************************************************************/
+/**
+*
+* This function is used for setting the IRQ Type of a single GPIO pin.
+*
+* @param	InstancePtr is a pointer to an XGpioPs instance.
+* @param	Pin is the pin number whose IRQ type is to be set.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+* @param	IrqType is the IRQ type for GPIO Pin. Use XGPIOPS_IRQ_TYPE_*
+*		defined in xgpiops.h to specify the IRQ type.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XGpioPs_SetIntrTypePin(XGpioPs *InstancePtr, u32 Pin, u8 IrqType)
+{
+	u32 IntrTypeReg;
+	u32 IntrPolReg;
+	u32 IntrOnAnyReg;
+	u8 Bank;
+	u8 PinNumber;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Pin < InstancePtr->MaxPinNum);
+	Xil_AssertVoid(IrqType <= XGPIOPS_IRQ_TYPE_LEVEL_LOW);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	IntrTypeReg = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				       ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				       XGPIOPS_INTTYPE_OFFSET);
+
+	IntrPolReg = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				      ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				      XGPIOPS_INTPOL_OFFSET);
+
+	IntrOnAnyReg = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+					((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+					XGPIOPS_INTANY_OFFSET);
+
+	switch (IrqType) {
+		case XGPIOPS_IRQ_TYPE_EDGE_RISING:
+			IntrTypeReg |= ((u32)1 << (u32)PinNumber);
+			IntrPolReg |= ((u32)1 << (u32)PinNumber);
+			IntrOnAnyReg &= ~((u32)1 << (u32)PinNumber);
+			break;
+		case XGPIOPS_IRQ_TYPE_EDGE_FALLING:
+			IntrTypeReg |= ((u32)1 << (u32)PinNumber);
+			IntrPolReg &= ~((u32)1 << (u32)PinNumber);
+			IntrOnAnyReg &= ~((u32)1 << (u32)PinNumber);
+			break;
+		case XGPIOPS_IRQ_TYPE_EDGE_BOTH:
+			IntrTypeReg |= ((u32)1 << (u32)PinNumber);
+			IntrOnAnyReg |= ((u32)1 << (u32)PinNumber);
+			break;
+		case XGPIOPS_IRQ_TYPE_LEVEL_HIGH:
+			IntrTypeReg &= ~((u32)1 << (u32)PinNumber);
+			IntrPolReg |= ((u32)1 << (u32)PinNumber);
+			break;
+		case XGPIOPS_IRQ_TYPE_LEVEL_LOW:
+			IntrTypeReg &= ~((u32)1 << (u32)PinNumber);
+			IntrPolReg &= ~((u32)1 << (u32)PinNumber);
+			break;
+		default:
+			/**< Default statement is added for MISRA C compliance. */
+			break;
+	}
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTTYPE_OFFSET, IntrTypeReg);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTPOL_OFFSET, IntrPolReg);
+
+	XGpioPs_WriteReg(InstancePtr->GpioConfig.BaseAddr,
+			  ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+			  XGPIOPS_INTANY_OFFSET, IntrOnAnyReg);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the IRQ Type of a given GPIO pin.
+*
+* @param	InstancePtr is a pointer to an XGpioPs instance.
+* @param	Pin is the pin number whose IRQ type is to be obtained.
+*		Valid values are 0-117 in Zynq and 0-173 in Zynq Ultrascale+ MP.
+*
+* @return	None.
+*
+* @note		Use XGPIOPS_IRQ_TYPE_* defined in xgpiops.h for the IRQ type
+*		returned by this function.
+*
+*****************************************************************************/
+u8 XGpioPs_GetIntrTypePin(XGpioPs *InstancePtr, u32 Pin)
+{
+	u32 IntrType;
+	u32 IntrPol;
+	u32 IntrOnAny;
+	u8 Bank;
+	u8 PinNumber;
+	u8 IrqType;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Pin < InstancePtr->MaxPinNum);
+
+	/* Get the Bank number and Pin number within the bank. */
+	XGpioPs_GetBankPin((u8)Pin, &Bank, &PinNumber);
+
+	IntrType = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				    ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				    XGPIOPS_INTTYPE_OFFSET) & ((u32)1 << PinNumber);
+
+	if (IntrType == ((u32)1 << PinNumber)) {
+
+		IntrOnAny = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				     ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				     XGPIOPS_INTANY_OFFSET) & ((u32)1 << PinNumber);
+
+		IntrPol = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				   ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				   XGPIOPS_INTPOL_OFFSET) & ((u32)1 << PinNumber);
+
+
+		if (IntrOnAny == ((u32)1 << PinNumber)) {
+			IrqType = XGPIOPS_IRQ_TYPE_EDGE_BOTH;
+		} else if (IntrPol == ((u32)1 << PinNumber)) {
+			IrqType = XGPIOPS_IRQ_TYPE_EDGE_RISING;
+		} else {
+			IrqType = XGPIOPS_IRQ_TYPE_EDGE_FALLING;
+		}
+	} else {
+
+		IntrPol = XGpioPs_ReadReg(InstancePtr->GpioConfig.BaseAddr,
+				   ((u32)(Bank) * XGPIOPS_REG_MASK_OFFSET) +
+				   XGPIOPS_INTPOL_OFFSET) & ((u32)1 << PinNumber);
+
+		if (IntrPol == ((u32)1 << PinNumber)) {
+			IrqType = XGPIOPS_IRQ_TYPE_LEVEL_HIGH;
+		} else {
+			IrqType = XGPIOPS_IRQ_TYPE_LEVEL_LOW;
+		}
+	}
+
+	return IrqType;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the status callback function. The callback function is
+* called by the  XGpioPs_IntrHandler when an interrupt occurs.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+* @param	CallBackRef is the upper layer callback reference passed back
+*		when the callback function is invoked.
+* @param	FuncPtr is the pointer to the callback function.
+*
+*
+* @return	None.
+*
+* @note		The handler is called within interrupt context, so it should do
+*		its work quickly and queue potentially time-consuming work to a
+*		task-level thread.
+*
+******************************************************************************/
+void XGpioPs_SetCallbackHandler(XGpioPs *InstancePtr, void *CallBackRef,
+				 XGpioPs_Handler FuncPointer)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(FuncPointer != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	InstancePtr->Handler = FuncPointer;
+	InstancePtr->CallBackRef = CallBackRef;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function is the interrupt handler for GPIO interrupts.It checks the
+* interrupt status registers of all the banks to determine the actual bank in
+* which an interrupt has been triggered. It then calls the upper layer callback
+* handler set by the function XGpioPs_SetBankHandler(). The callback is called
+* when an interrupt
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+*
+* @return	None.
+*
+* @note		This function does not save and restore the processor context
+*		such that the user must provide this processing.
+*
+******************************************************************************/
+void XGpioPs_IntrHandler(XGpioPs *InstancePtr)
+{
+	u8 Bank;
+	u32 IntrStatus;
+	u32 IntrEnabled;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	for (Bank = 0U; Bank < InstancePtr->MaxBanks; Bank++) {
+		IntrStatus = XGpioPs_IntrGetStatus(InstancePtr, Bank);
+		if (IntrStatus != (u32)0) {
+			IntrEnabled = XGpioPs_IntrGetEnabled(InstancePtr,
+							      Bank);
+			XGpioPs_IntrClear((XGpioPs *)InstancePtr, Bank,
+							(IntrStatus & IntrEnabled));
+			InstancePtr->Handler(InstancePtr->
+					     CallBackRef, Bank,
+					     (IntrStatus & IntrEnabled));
+		}
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* This is a stub for the status callback. The stub is here in case the upper
+* layers do not set the handler.
+*
+* @param	CallBackRef is a pointer to the upper layer callback reference
+* @param	Bank is the GPIO Bank in which an interrupt occurred.
+* @param	Status is the Interrupt status of the GPIO bank.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void StubHandler(void *CallBackRef, u32 Bank, u32 Status)
+{
+	(void*) CallBackRef;
+	(void) Bank;
+	(void) Status;
+
+	Xil_AssertVoidAlways();
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_selftest.c
new file mode 100644
index 000000000..da1973a2d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_selftest.c
@@ -0,0 +1,133 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xgpiops_selftest.c
+* @addtogroup gpiops_v3_1
+* @{
+*
+* This file contains a diagnostic self-test function for the XGpioPs driver.
+*
+* Read xgpiops.h file for more information.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a sv   01/18/10 First Release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+
+#include "xstatus.h"
+#include "xgpiops.h"
+
+/************************** Constant Definitions ****************************/
+
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Variable Definitions ****************************/
+
+/************************** Function Prototypes *****************************/
+
+/*****************************************************************************/
+/**
+*
+* This function runs a self-test on the GPIO driver/device. This function
+* does a register read/write test on some of the Interrupt Registers.
+*
+* @param	InstancePtr is a pointer to the XGpioPs instance.
+*
+* @return
+*		- XST_SUCCESS if the self-test passed.
+* 		- XST_FAILURE otherwise.
+*
+*
+******************************************************************************/
+s32 XGpioPs_SelfTest(XGpioPs *InstancePtr)
+{
+	s32 Status = XST_SUCCESS;
+	u32 IntrEnabled;
+	u32 CurrentIntrType = 0U;
+	u32 CurrentIntrPolarity = 0U;
+	u32 CurrentIntrOnAny = 0U;
+	u32 IntrType = 0U;
+	u32 IntrPolarity = 0U;
+	u32 IntrOnAny = 0U;
+	u32 IntrTestValue = 0x22U;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Disable the Interrupts for Bank 0 . */
+	IntrEnabled = XGpioPs_IntrGetEnabled(InstancePtr, XGPIOPS_BANK0);
+	XGpioPs_IntrDisable(InstancePtr, XGPIOPS_BANK0, IntrEnabled);
+
+	/*
+	 * Get the Current Interrupt properties for Bank 0.
+	 * Set them to a known value, read it back and compare.
+	 */
+	XGpioPs_GetIntrType(InstancePtr, XGPIOPS_BANK0, &CurrentIntrType,
+			     &CurrentIntrPolarity, &CurrentIntrOnAny);
+
+	XGpioPs_SetIntrType(InstancePtr, XGPIOPS_BANK0, IntrTestValue,
+			     IntrTestValue, IntrTestValue);
+
+	XGpioPs_GetIntrType(InstancePtr, XGPIOPS_BANK0, &IntrType,
+			     &IntrPolarity, &IntrOnAny);
+
+	if ((IntrType != IntrTestValue) && (IntrPolarity != IntrTestValue) &&
+	    (IntrOnAny != IntrTestValue)) {
+
+		Status = XST_FAILURE;
+	}
+
+	/*
+	 * Restore the contents of all the interrupt registers modified in this
+	 * test.
+	 */
+	XGpioPs_SetIntrType(InstancePtr, XGPIOPS_BANK0, CurrentIntrType,
+			     CurrentIntrPolarity, CurrentIntrOnAny);
+
+	XGpioPs_IntrEnable(InstancePtr, XGPIOPS_BANK0, IntrEnabled);
+
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_sinit.c
new file mode 100644
index 000000000..2ca008373
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/gpiops_v3_1/src/xgpiops_sinit.c
@@ -0,0 +1,101 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xgpiops_sinit.c
+* @addtogroup gpiops_v3_1
+* @{
+*
+* This file contains the implementation of the XGpioPs driver's static
+* initialization functionality.
+*
+* @note		None.
+*
+* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a sv   01/15/10 First Release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xgpiops.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+extern XGpioPs_Config XGpioPs_ConfigTable[XPAR_XGPIOPS_NUM_INSTANCES];
+
+/*****************************************************************************/
+/**
+*
+* This function looks for the device configuration based on the unique device
+* ID. The table XGpioPs_ConfigTable[] contains the configuration information
+* for each device in the system.
+*
+* @param	DeviceId is the unique device ID of the device being looked up.
+*
+* @return	A pointer to the configuration table entry corresponding to the
+*		given device ID, or NULL if no match is found.
+*
+* @note		None.
+*
+******************************************************************************/
+XGpioPs_Config *XGpioPs_LookupConfig(u16 DeviceId)
+{
+	XGpioPs_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index = 0U; Index < (u32)XPAR_XGPIOPS_NUM_INSTANCES; Index++) {
+		if (XGpioPs_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XGpioPs_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XGpioPs_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/Makefile
new file mode 100644
index 000000000..8c16c35ae
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xiicps_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling iicps"
+
+xiicps_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xiicps_includes
+
+xiicps_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps.c
new file mode 100644
index 000000000..812c2ecdc
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps.c
@@ -0,0 +1,332 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* Contains implementation of required functions for the XIicPs driver.
+* See xiicps.h for detailed description of the device and driver.
+*
+* 
 MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- --------------------------------------------
+* 1.00a drg/jz  01/30/10 First release
+* 1.00a sdm     09/21/11 Updated the InstancePtr->Options in the
+*			 XIicPs_CfgInitialize by calling XIicPs_GetOptions.
+* 2.1   hk      04/25/14 Explicitly reset CR and clear FIFO in Abort function
+*                        and state the same in the comments. CR# 784254.
+*                        Fix for CR# 761060 - provision for repeated start.
+* 2.3	sk		10/07/14 Repeated start feature removed.
+* 3.0	sk		11/03/14 Modified TimeOut Register value to 0xFF
+* 						 in XIicPs_Reset.
+*				12/06/14 Implemented Repeated start feature.
+*				01/31/15 Modified the code according to MISRAC 2012 Compliant.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xiicps.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+static void StubHandler(void *CallBackRef, u32 StatusEvent);
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+*
+* Initializes a specific XIicPs instance such that the driver is ready to use.
+*
+* The state of the device after initialization is:
+*   - Device is disabled
+*   - Slave mode
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	ConfigPtr is a reference to a structure containing information
+*		about a specific IIC device. This function initializes an
+*		InstancePtr object for a specific device specified by the
+*		contents of Config.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. The caller is responsible for keeping the address
+*		mapping from EffectiveAddr to the device physical base address
+*		unchanged once this function is invoked. Unexpected errors may
+*		occur if the address mapping changes after this function is
+*		called. If address translation is not used, use
+*		ConfigPtr->BaseAddress for this parameter, passing the physical
+*		address instead.
+*
+* @return	The return value is XST_SUCCESS if successful.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XIicPs_CfgInitialize(XIicPs *InstancePtr, XIicPs_Config *ConfigPtr,
+				  u32 EffectiveAddr)
+{
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+
+	/*
+	 * Set some default values.
+	 */
+	InstancePtr->Config.DeviceId = ConfigPtr->DeviceId;
+	InstancePtr->Config.BaseAddress = EffectiveAddr;
+	InstancePtr->Config.InputClockHz = ConfigPtr->InputClockHz;
+	InstancePtr->StatusHandler = StubHandler;
+	InstancePtr->CallBackRef = NULL;
+
+	InstancePtr->IsReady = (u32)XIL_COMPONENT_IS_READY;
+
+	/*
+	 * Reset the IIC device to get it into its initial state. It is expected
+	 * that device configuration will take place after this initialization
+	 * is done, but before the device is started.
+	 */
+	XIicPs_Reset(InstancePtr);
+
+	/*
+	 * Keep a copy of what options this instance has.
+	 */
+	InstancePtr->Options = XIicPs_GetOptions(InstancePtr);
+
+	/* Initialize repeated start flag to 0 */
+	InstancePtr->IsRepeatedStart = 0;
+
+	return (s32)XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+* Check whether the I2C bus is busy
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return
+* 		- TRUE if the bus is busy.
+*		- FALSE if the bus is not busy.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XIicPs_BusIsBusy(XIicPs *InstancePtr)
+{
+	u32 StatusReg;
+	s32	Status;
+
+	StatusReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+					   XIICPS_SR_OFFSET);
+	if ((StatusReg & XIICPS_SR_BA_MASK) != 0x0U) {
+		Status = (s32)TRUE;
+	}else {
+		Status = (s32)FALSE;
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This is a stub for the status callback. The stub is here in case the upper
+* layers forget to set the handler.
+*
+* @param	CallBackRef is a pointer to the upper layer callback reference.
+* @param	StatusEvent is the event that just occurred.
+* @param	ByteCount is the number of bytes transferred up until the event
+*		occurred.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void StubHandler(void *CallBackRef, u32 StatusEvent)
+{
+	(void) ((void *)CallBackRef);
+	(void) StatusEvent;
+	Xil_AssertVoidAlways();
+}
+
+
+/*****************************************************************************/
+/**
+*
+* Aborts a transfer in progress by resetting the FIFOs. The byte counts are
+* cleared.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XIicPs_Abort(XIicPs *InstancePtr)
+{
+	u32 IntrMaskReg;
+	u32 IntrStatusReg;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Enter a critical section, so disable the interrupts while we clear
+	 * the FIFO and the status register.
+	 */
+	IntrMaskReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+					   XIICPS_IMR_OFFSET);
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XIICPS_IDR_OFFSET, XIICPS_IXR_ALL_INTR_MASK);
+
+	/*
+	 * Reset the settings in config register and clear the FIFOs.
+	 */
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress, XIICPS_CR_OFFSET,
+			  XIICPS_CR_RESET_VALUE | XIICPS_CR_CLR_FIFO_MASK);
+
+	/*
+	 * Read, then write the interrupt status to make sure there are no
+	 * pending interrupts.
+	 */
+	IntrStatusReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+					 XIICPS_ISR_OFFSET);
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XIICPS_ISR_OFFSET, IntrStatusReg);
+
+	/*
+	 * Restore the interrupt state.
+	 */
+	IntrMaskReg = XIICPS_IXR_ALL_INTR_MASK & (~IntrMaskReg);
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XIICPS_IER_OFFSET, IntrMaskReg);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* Resets the IIC device. Reset must only be called after the driver has been
+* initialized. The configuration of the device after reset is the same as its
+* configuration after initialization.  Any data transfer that is in progress is
+* aborted.
+*
+* The upper layer software is responsible for re-configuring (if necessary)
+* and reenabling interrupts for the IIC device after the reset.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XIicPs_Reset(XIicPs *InstancePtr)
+{
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Abort any transfer that is in progress.
+	 */
+	XIicPs_Abort(InstancePtr);
+
+	/*
+	 * Reset any values so the software state matches the hardware device.
+	 */
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress, XIICPS_CR_OFFSET,
+			  XIICPS_CR_RESET_VALUE);
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XIICPS_TIME_OUT_OFFSET, XIICPS_TO_RESET_VALUE);
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress, XIICPS_IDR_OFFSET,
+			  XIICPS_IXR_ALL_INTR_MASK);
+
+}
+/*****************************************************************************/
+/**
+* Put more data into the transmit FIFO, number of bytes is ether expected
+* number of bytes for this transfer or available space in FIFO, which ever
+* is less.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	Number of bytes left for this instance.
+*
+* @note		This is function is shared by master and slave.
+*
+******************************************************************************/
+s32 TransmitFifoFill(XIicPs *InstancePtr)
+{
+	u8 AvailBytes;
+	s32 LoopCnt;
+	s32 NumBytesToSend;
+
+	/*
+	 * Determine number of bytes to write to FIFO.
+	 */
+	AvailBytes = (u8)XIICPS_FIFO_DEPTH -
+		(u8)XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+					   XIICPS_TRANS_SIZE_OFFSET);
+
+	if (InstancePtr->SendByteCount > (s32)AvailBytes) {
+		NumBytesToSend = (s32)AvailBytes;
+	} else {
+		NumBytesToSend = InstancePtr->SendByteCount;
+	}
+
+	/*
+	 * Fill FIFO with amount determined above.
+	 */
+	for (LoopCnt = 0; LoopCnt < NumBytesToSend; LoopCnt++) {
+		XIicPs_SendByte(InstancePtr);
+	}
+
+	return InstancePtr->SendByteCount;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps.h
new file mode 100644
index 000000000..73ad5dc64
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps.h
@@ -0,0 +1,420 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps.h
+* @addtogroup iicps_v3_0
+* @{
+* @details
+*
+* This is an implementation of IIC driver in the PS block. The device can
+* be either a master or a slave on the IIC bus. This implementation supports
+* both interrupt mode transfer and polled mode transfer. Only 7-bit address
+* is used in the driver, although the hardware also supports 10-bit address.
+*
+* IIC is a 2-wire serial interface.  The master controls the clock, so it can
+* regulate when it wants to send or receive data. The slave is under control of
+* the master, it must respond quickly since it has no control of the clock and
+* must send/receive data as fast or as slow as the master does.
+*
+* The higher level software must implement a higher layer protocol to inform
+* the slave what to send to the master.
+*
+* Initialization & Configuration
+*
+* The XIicPs_Config structure is used by the driver to configure itself. This
+* configuration structure is typically created by the tool-chain based on HW
+* build properties.
+*
+* To support multiple runtime loading and initialization strategies employed by
+* various operating systems, the driver instance can be initialized in the
+* following way:
+*
+*    - XIicPs_LookupConfig(DeviceId) - Use the device identifier to find
+*      the static configuration structure defined in xiicps_g.c. This is
+*      setup by the tools. For some operating systems the config structure
+*      will be initialized by the software and this call is not needed.
+*
+*   - XIicPs_CfgInitialize(InstancePtr, CfgPtr, EffectiveAddr) - Uses a
+*     configuration structure provided by the caller. If running in a
+*     system with address translation, the provided virtual memory base
+*     address replaces the physical address in the configuration
+*     structure.
+*
+* Multiple Masters
+*
+* More than one master can exist, bus arbitration is defined in the IIC
+* standard. Lost of arbitration causes arbitration loss interrupt on the device.
+*
+* Multiple Slaves
+*
+* Multiple slaves are supported by selecting them with unique addresses. It is
+* up to the system designer to be sure all devices on the IIC bus have
+* unique addresses.
+*
+* Addressing
+*
+* The IIC hardware can use 7 or 10 bit addresses.  The driver provides the
+* ability to control which address size is sent in messages as a master to a
+* slave device.
+*
+* FIFO Size 
+* The hardware FIFO is 32 bytes deep. The user must know the limitations of
+* other IIC devices on the bus. Some are only able to receive a limited number
+* of bytes in a single transfer.
+*
+* Data Rates
+*
+* The data rate is set by values in the control register. The formula for
+* determining the correct register values is:
+* Fscl = Fpclk/(22 x (divisor_a+1) x (divisor_b+1))
+*
+* When the device is configured as a slave, the slck setting controls the
+* sample rate and so must be set to be at least as fast as the fastest scl
+* expected to be seen in the system.
+*
+* Polled Mode Operation
+*
+* This driver supports polled mode transfers.
+*
+* Interrupts
+*
+* The user must connect the interrupt handler of the driver,
+* XIicPs_InterruptHandler to an interrupt system such that it will be called
+* when an interrupt occurs. This function does not save and restore the
+* processor context such that the user must provide this processing.
+*
+* The driver handles the following interrupts:
+* - Transfer complete
+* - More Data
+* - Transfer not Acknowledged
+* - Transfer Time out
+* - Monitored slave ready - master mode only
+* - Receive Overflow
+* - Transmit FIFO overflow
+* - Receive FIFO underflow
+* - Arbitration lost
+*
+* Bus Busy
+*
+* Bus busy is checked before the setup of a master mode device, to avoid
+* unnecessary arbitration loss interrupt.
+*
+* RTOS Independence
+*
+* This driver is intended to be RTOS and processor independent.  It works with
+* physical addresses only.  Any needs for dynamic memory management, threads or
+* thread mutual exclusion, virtual memory, or cache control must be satisfied by
+* the layer above this driver.
+*
+*Repeated Start
+*
+* The I2C controller does not indicate completion of a receive transfer if HOLD
+* bit is set. Due to this errata, repeated start cannot be used if a receive
+* transfer is followed by any other transfer.
+*
+* 
 MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- -----------------------------------------------
+* 1.00a drg/jz  01/30/08 First release
+* 1.00a sdm     09/21/11 Fixed an issue in the XIicPs_SetOptions and
+*			 XIicPs_ClearOptions where the InstancePtr->Options
+*			 was not updated correctly.
+* 			 Updated the InstancePtr->Options in the
+*			 XIicPs_CfgInitialize by calling XIicPs_GetOptions.
+*			 Updated the XIicPs_SetupMaster to not check for
+*			 Bus Busy condition when the Hold Bit is set.
+*			 Removed some unused variables.
+* 1.01a sg      03/30/12 Fixed an issue in XIicPs_MasterSendPolled where a
+*			 check for transfer completion is added, which indicates
+*			 the completion of current transfer.
+* 1.02a sg	08/29/12 Updated the logic to arrive at the best divisors
+*			 to achieve I2C clock with minimum error for
+*			 CR #674195
+* 1.03a hk  05/04/13 Initialized BestDivA and BestDivB to 0.
+*			 This is fix for CR#704398 to remove warning.
+* 2.0   hk  03/07/14 Added check for error status in the while loop that
+*                    checks for completion.
+*                    (XIicPs_MasterSendPolled function). CR# 762244, 764875.
+*                    Limited frequency set when 100KHz or 400KHz is
+*                    selected. This is a hardware limitation. CR#779290.
+* 2.1   hk  04/24/14 Fix for CR# 789821 to handle >14 byte transfers.
+*                    Explicitly reset CR and clear FIFO in Abort function
+*                    and state the same in the comments. CR# 784254.
+*                    Fix for CR# 761060 - provision for repeated start.
+* 2.2   hk  08/23/14 Slave monitor mode changes - clear FIFO, enable
+*                    read mode and clear transfer size register.
+*                    Disable NACK to avoid interrupts on each retry.
+* 2.3	sk	10/07/14 Repeated start feature deleted.
+* 3.0	sk	11/03/14 Modified TimeOut Register value to 0xFF
+* 					 in XIicPs_Reset.
+* 			12/06/14 Implemented Repeated start feature.
+*			01/31/15 Modified the code according to MISRAC 2012 Compliant.
+*			02/18/15 Implemented larger data transfer using repeated start
+*					  in Zynq UltraScale MP.
+*
+* 

+*
+******************************************************************************/
+
+#ifndef XIICPS_H       /* prevent circular inclusions */
+#define XIICPS_H       /* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xstatus.h"
+#include "xiicps_hw.h"
+#include "xplatform_info.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Configuration options
+ *
+ * The following options may be specified or retrieved for the device and
+ * enable/disable additional features of the IIC.  Each of the options
+ * are bit fields, so more than one may be specified.
+ *
+ * @{
+ */
+#define XIICPS_7_BIT_ADDR_OPTION	0x01U  /**< 7-bit address mode */
+#define XIICPS_10_BIT_ADDR_OPTION	0x02U  /**< 10-bit address mode */
+#define XIICPS_SLAVE_MON_OPTION		0x04U  /**< Slave monitor mode */
+#define XIICPS_REP_START_OPTION		0x08U  /**< Repeated Start */
+/*@}*/
+
+/** @name Callback events
+ *
+ * These constants specify the handler events that are passed to an application
+ * event handler from the driver.  These constants are bit masks such that
+ * more than one event can be passed to the handler.
+ *
+ * @{
+ */
+#define XIICPS_EVENT_COMPLETE_SEND	0x0001U  /**< Transmit Complete Event*/
+#define XIICPS_EVENT_COMPLETE_RECV	0x0002U  /**< Receive Complete Event*/
+#define XIICPS_EVENT_TIME_OUT		0x0004U  /**< Transfer timed out */
+#define XIICPS_EVENT_ERROR			0x0008U  /**< Receive error */
+#define XIICPS_EVENT_ARB_LOST		0x0010U  /**< Arbitration lost */
+#define XIICPS_EVENT_NACK			0x0020U  /**< NACK Received */
+#define XIICPS_EVENT_SLAVE_RDY		0x0040U  /**< Slave ready */
+#define XIICPS_EVENT_RX_OVR			0x0080U  /**< RX overflow */
+#define XIICPS_EVENT_TX_OVR			0x0100U  /**< TX overflow */
+#define XIICPS_EVENT_RX_UNF			0x0200U  /**< RX underflow */
+/*@}*/
+
+/** @name Role constants
+ *
+ * These constants are used to pass into the device setup routines to
+ * set up the device according to transfer direction.
+ */
+#define SENDING_ROLE		1  /**< Transfer direction is sending */
+#define RECVING_ROLE		0  /**< Transfer direction is receiving */
+
+/* Maximum transfer size */
+#define XIICPS_MAX_TRANSFER_SIZE	(u32)(255U - 3U)
+
+/**************************** Type Definitions *******************************/
+
+/**
+* The handler data type allows the user to define a callback function to
+* respond to interrupt events in the system. This function is executed
+* in interrupt context, so amount of processing should be minimized.
+*
+* @param	CallBackRef is the callback reference passed in by the upper
+*		layer when setting the callback functions, and passed back to
+*		the upper layer when the callback is invoked. Its type is
+*		not important to the driver, so it is a void pointer.
+* @param	StatusEvent indicates one or more status events that occurred.
+*/
+typedef void (*XIicPs_IntrHandler) (void *CallBackRef, u32 StatusEvent);
+
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct {
+	u16 DeviceId;     /**< Unique ID  of device */
+	u32 BaseAddress;  /**< Base address of the device */
+	u32 InputClockHz; /**< Input clock frequency */
+} XIicPs_Config;
+
+/**
+ * The XIicPs driver instance data. The user is required to allocate a
+ * variable of this type for each IIC device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+	XIicPs_Config Config;	/* Configuration structure */
+	u32 IsReady;		/* Device is initialized and ready */
+	u32 Options;		/* Options set in the device */
+
+	u8 *SendBufferPtr;	/* Pointer to send buffer */
+	u8 *RecvBufferPtr;	/* Pointer to recv buffer */
+	s32 SendByteCount;	/* Number of bytes still expected to send */
+	s32 RecvByteCount;	/* Number of bytes still expected to receive */
+	s32 CurrByteCount;	/* No. of bytes expected in current transfer */
+
+	s32 UpdateTxSize;	/* If tx size register has to be updated */
+	s32 IsSend;		/* Whether master is sending or receiving */
+	s32 IsRepeatedStart;	/* Indicates if user set repeated start */
+
+	XIicPs_IntrHandler StatusHandler;  /* Event handler function */
+	void *CallBackRef;	/* Callback reference for event handler */
+} XIicPs;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+/****************************************************************************/
+/*
+*
+* Place one byte into the transmit FIFO.
+*
+* @param	InstancePtr is the instance of IIC
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XIicPs_SendByte(XIicPs *InstancePtr)
+*
+*****************************************************************************/
+#define XIicPs_SendByte(InstancePtr)					\
+{									\
+	u8 Data;							\
+	Data = *((InstancePtr)->SendBufferPtr);				\
+	 XIicPs_Out32((InstancePtr)->Config.BaseAddress			\
+			 + (u32)(XIICPS_DATA_OFFSET), 			\
+					(u32)(Data));			\
+	(InstancePtr)->SendBufferPtr += 1;				\
+	(InstancePtr)->SendByteCount -= 1;\
+}
+
+/****************************************************************************/
+/*
+*
+* Receive one byte from FIFO.
+*
+* @param	InstancePtr is the instance of IIC
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		u8 XIicPs_RecvByte(XIicPs *InstancePtr)
+*
+*****************************************************************************/
+#define XIicPs_RecvByte(InstancePtr)					\
+{									\
+	u8 *Data, Value;						\
+	Value = (u8)(XIicPs_In32((InstancePtr)->Config.BaseAddress	\
+		  + (u32)XIICPS_DATA_OFFSET));  			\
+	Data = &Value;							\
+	*(InstancePtr)->RecvBufferPtr = *Data;				\
+	(InstancePtr)->RecvBufferPtr += 1;				\
+	 (InstancePtr)->RecvByteCount --; 				\
+}
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Function for configuration lookup, in xiicps_sinit.c
+ */
+XIicPs_Config *XIicPs_LookupConfig(u16 DeviceId);
+
+/*
+ * Functions for general setup, in xiicps.c
+ */
+s32 XIicPs_CfgInitialize(XIicPs *InstancePtr, XIicPs_Config * ConfigPtr,
+				  u32 EffectiveAddr);
+
+void XIicPs_Abort(XIicPs *InstancePtr);
+void XIicPs_Reset(XIicPs *InstancePtr);
+
+s32 XIicPs_BusIsBusy(XIicPs *InstancePtr);
+s32 TransmitFifoFill(XIicPs *InstancePtr);
+
+/*
+ * Functions for interrupts, in xiicps_intr.c
+ */
+void XIicPs_SetStatusHandler(XIicPs *InstancePtr, void *CallBackRef,
+				  XIicPs_IntrHandler FunctionPtr);
+
+/*
+ * Functions for device as master, in xiicps_master.c
+ */
+void XIicPs_MasterSend(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount,
+		u16 SlaveAddr);
+void XIicPs_MasterRecv(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount,
+		u16 SlaveAddr);
+s32 XIicPs_MasterSendPolled(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount,
+		u16 SlaveAddr);
+s32 XIicPs_MasterRecvPolled(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount,
+		u16 SlaveAddr);
+void XIicPs_EnableSlaveMonitor(XIicPs *InstancePtr, u16 SlaveAddr);
+void XIicPs_DisableSlaveMonitor(XIicPs *InstancePtr);
+void XIicPs_MasterInterruptHandler(XIicPs *InstancePtr);
+
+/*
+ * Functions for device as slave, in xiicps_slave.c
+ */
+void XIicPs_SetupSlave(XIicPs *InstancePtr, u16 SlaveAddr);
+void XIicPs_SlaveSend(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount);
+void XIicPs_SlaveRecv(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount);
+s32 XIicPs_SlaveSendPolled(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount);
+s32 XIicPs_SlaveRecvPolled(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount);
+void XIicPs_SlaveInterruptHandler(XIicPs *InstancePtr);
+
+/*
+ * Functions for selftest, in xiicps_selftest.c
+ */
+s32 XIicPs_SelfTest(XIicPs *InstancePtr);
+
+/*
+ * Functions for setting and getting data rate, in xiicps_options.c
+ */
+s32 XIicPs_SetOptions(XIicPs *InstancePtr, u32 Options);
+s32 XIicPs_ClearOptions(XIicPs *InstancePtr, u32 Options);
+u32 XIicPs_GetOptions(XIicPs *InstancePtr);
+
+s32 XIicPs_SetSClk(XIicPs *InstancePtr, u32 FsclHz);
+u32 XIicPs_GetSClk(XIicPs *InstancePtr);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_g.c
new file mode 100644
index 000000000..50f1c1413
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_g.c
@@ -0,0 +1,61 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xiicps.h"
+
+/*
+* The configuration table for devices
+*/
+
+XIicPs_Config XIicPs_ConfigTable[] =
+{
+	{
+		XPAR_PSU_I2C_0_DEVICE_ID,
+		XPAR_PSU_I2C_0_BASEADDR,
+		XPAR_PSU_I2C_0_I2C_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_I2C_1_DEVICE_ID,
+		XPAR_PSU_I2C_1_BASEADDR,
+		XPAR_PSU_I2C_1_I2C_CLK_FREQ_HZ
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_hw.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_hw.c
new file mode 100644
index 000000000..8b7a58fc6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_hw.c
@@ -0,0 +1,111 @@
+/******************************************************************************
+*
+* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps_hw.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* Contains implementation of required functions for providing the reset sequence
+* to the i2c interface
+*
+* 
 MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- --------------------------------------------
+* 1.04a kpc     11/07/13 First release
+* 3.0	sk		11/03/14 Modified TimeOut Register value to 0xFF
+*				01/31/15 Modified the code according to MISRAC 2012 Compliant.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xiicps_hw.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+/*****************************************************************************/
+/**
+* This function perform the reset sequence to the given I2c interface by
+* configuring the appropriate control bits in the I2c specifc registers
+* the i2cps reset squence involves the following steps
+*	Disable all the interuupts
+*	Clear the status
+*	Clear FIFO's and disable hold bit
+*	Clear the line status
+*	Update relevant config registers with reset values
+*
+* @param   BaseAddress of the interface
+*
+* @return N/A
+*
+* @note
+* This function will not modify the slcr registers that are relavant for
+* I2c controller
+******************************************************************************/
+void XIicPs_ResetHw(u32 BaseAddress)
+{
+	u32 RegVal;
+
+	/* Disable all the interrupts */
+	XIicPs_WriteReg(BaseAddress, XIICPS_IDR_OFFSET, XIICPS_IXR_ALL_INTR_MASK);
+	/* Clear the interrupt status */
+	RegVal = XIicPs_ReadReg(BaseAddress,XIICPS_ISR_OFFSET);
+	XIicPs_WriteReg(BaseAddress, XIICPS_ISR_OFFSET, RegVal);
+	/* Clear the hold bit,master enable bit and ack bit */
+	RegVal = XIicPs_ReadReg(BaseAddress,XIICPS_CR_OFFSET);
+	RegVal &= ~(XIICPS_CR_HOLD_MASK|XIICPS_CR_MS_MASK|XIICPS_CR_ACKEN_MASK);
+	/* Clear the fifos */
+	RegVal |= XIICPS_CR_CLR_FIFO_MASK;
+	XIicPs_WriteReg(BaseAddress, XIICPS_CR_OFFSET, RegVal);
+	/* Clear the timeout register */
+	XIicPs_WriteReg(BaseAddress, XIICPS_TIME_OUT_OFFSET, XIICPS_TO_RESET_VALUE);
+	/* Clear the transfer size register */
+	XIicPs_WriteReg(BaseAddress, XIICPS_TRANS_SIZE_OFFSET, 0x0U);
+	/* Clear the status register */
+	RegVal = XIicPs_ReadReg(BaseAddress,XIICPS_SR_OFFSET);
+	XIicPs_WriteReg(BaseAddress, XIICPS_SR_OFFSET, RegVal);
+	/* Update the configuraqtion register with reset value */
+	XIicPs_WriteReg(BaseAddress, XIICPS_CR_OFFSET, 0x0U);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_hw.h
new file mode 100644
index 000000000..cec349928
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_hw.h
@@ -0,0 +1,383 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps_hw.h
+* @addtogroup iicps_v3_0
+* @{
+*
+* This header file contains the hardware definition for an IIC device.
+* It includes register definitions and interface functions to read/write
+* the registers.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who 	Date     Changes
+* ----- ------  -------- -----------------------------------------------
+* 1.00a drg/jz  01/30/10 First release
+* 1.04a kpc		11/07/13 Added function prototype.
+* 3.0	sk		11/03/14 Modified the TimeOut Register value to 0xFF
+*				01/31/15 Modified the code according to MISRAC 2012 Compliant.
+* 

+*
+******************************************************************************/
+#ifndef XIICPS_HW_H		/* prevent circular inclusions */
+#define XIICPS_HW_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Register Map
+ *
+ * Register offsets for the IIC.
+ * @{
+ */
+#define XIICPS_CR_OFFSET			0x00U  /**< 32-bit Control */
+#define XIICPS_SR_OFFSET			0x04U  /**< Status */
+#define XIICPS_ADDR_OFFSET			0x08U  /**< IIC Address */
+#define XIICPS_DATA_OFFSET			0x0CU  /**< IIC FIFO Data */
+#define XIICPS_ISR_OFFSET			0x10U  /**< Interrupt Status */
+#define XIICPS_TRANS_SIZE_OFFSET	0x14U  /**< Transfer Size */
+#define XIICPS_SLV_PAUSE_OFFSET		0x18U  /**< Slave monitor pause */
+#define XIICPS_TIME_OUT_OFFSET		0x1CU  /**< Time Out */
+#define XIICPS_IMR_OFFSET			0x20U  /**< Interrupt Enabled Mask */
+#define XIICPS_IER_OFFSET			0x24U  /**< Interrupt Enable */
+#define XIICPS_IDR_OFFSET			0x28U  /**< Interrupt Disable */
+/* @} */
+
+/** @name Control Register
+ *
+ * This register contains various control bits that
+ * affects the operation of the IIC controller. Read/Write.
+ * @{
+ */
+
+#define XIICPS_CR_DIV_A_MASK	0x0000C000U /**< Clock Divisor A */
+#define XIICPS_CR_DIV_A_SHIFT			14U /**< Clock Divisor A shift */
+#define XIICPS_DIV_A_MAX				 4U /**< Maximum value of Divisor A */
+#define XIICPS_CR_DIV_B_MASK	0x00003F00U /**< Clock Divisor B */
+#define XIICPS_CR_DIV_B_SHIFT			 8U /**< Clock Divisor B shift */
+#define XIICPS_CR_CLR_FIFO_MASK	0x00000040U /**< Clear FIFO, auto clears*/
+#define XIICPS_CR_SLVMON_MASK	0x00000020U /**< Slave monitor mode */
+#define XIICPS_CR_HOLD_MASK		0x00000010U /**<  Hold bus 1=Hold scl,
+												0=terminate transfer */
+#define XIICPS_CR_ACKEN_MASK	0x00000008U /**< Enable TX of ACK when
+												Master receiver*/
+#define XIICPS_CR_NEA_MASK		0x00000004U /**< Addressing Mode 1=7 bit,
+												0=10 bit */
+#define XIICPS_CR_MS_MASK		0x00000002U /**< Master mode bit 1=Master,
+												0=Slave */
+#define XIICPS_CR_RD_WR_MASK	0x00000001U /**< Read or Write Master
+												transfer  0=Transmitter,
+												1=Receiver*/
+#define XIICPS_CR_RESET_VALUE			 0U /**< Reset value of the Control
+												register */
+/* @} */
+
+/** @name IIC Status Register
+ *
+ * This register is used to indicate status of the IIC controller. Read only
+ * @{
+ */
+#define XIICPS_SR_BA_MASK		0x00000100U  /**< Bus Active Mask */
+#define XIICPS_SR_RXOVF_MASK	0x00000080U  /**< Receiver Overflow Mask */
+#define XIICPS_SR_TXDV_MASK		0x00000040U  /**< Transmit Data Valid Mask */
+#define XIICPS_SR_RXDV_MASK		0x00000020U  /**< Receiver Data Valid Mask */
+#define XIICPS_SR_RXRW_MASK		0x00000008U  /**< Receive read/write Mask */
+/* @} */
+
+/** @name IIC Address Register
+ *
+ * Normal addressing mode uses add[6:0]. Extended addressing mode uses add[9:0].
+ * A write access to this register always initiates a transfer if the IIC is in
+ * master mode. Read/Write
+ * @{
+ */
+#define XIICPS_ADDR_MASK	0x000003FF  /**< IIC Address Mask */
+/* @} */
+
+/** @name IIC Data Register
+ *
+ * When written to, the data register sets data to transmit. When read from, the
+ * data register reads the last received byte of data. Read/Write
+ * @{
+ */
+#define XIICPS_DATA_MASK	0x000000FF  /**< IIC Data Mask */
+/* @} */
+
+/** @name IIC Interrupt Registers
+ *
+ * IIC Interrupt Status Register
+ *
+ * This register holds the interrupt status flags for the IIC controller. Some
+ * of the flags are level triggered
+ * - i.e. are set as long as the interrupt condition exists.  Other flags are
+ *   edge triggered, which means they are set one the interrupt condition occurs
+ *   then remain set until they are cleared by software.
+ *   The interrupts are cleared by writing a one to the interrupt bit position
+ *   in the Interrupt Status Register. Read/Write.
+ *
+ * IIC Interrupt Enable Register
+ *
+ * This register is used to enable interrupt sources for the IIC controller.
+ * Writing a '1' to a bit in this register clears the corresponding bit in the
+ * IIC Interrupt Mask register.  Write only.
+ *
+ * IIC Interrupt Disable Register 
+ *
+ * This register is used to disable interrupt sources for the IIC controller.
+ * Writing a '1' to a bit in this register sets the corresponding bit in the
+ * IIC Interrupt Mask register. Write only.
+ *
+ * IIC Interrupt Mask Register
+ *
+ * This register shows the enabled/disabled status of each IIC controller
+ * interrupt source. A bit set to 1 will ignore the corresponding interrupt in
+ * the status register. A bit set to 0 means the interrupt is enabled.
+ * All mask bits are set and all interrupts are disabled after reset. Read only.
+ *
+ * All four registers have the same bit definitions. They are only defined once
+ * for each of the Interrupt Enable Register, Interrupt Disable Register,
+ * Interrupt Mask Register, and Interrupt Status Register
+ * @{
+ */
+
+#define XIICPS_IXR_ARB_LOST_MASK  0x00000200U	 /**< Arbitration Lost Interrupt
+													mask */
+#define XIICPS_IXR_RX_UNF_MASK    0x00000080U	 /**< FIFO Recieve Underflow
+													Interrupt mask */
+#define XIICPS_IXR_TX_OVR_MASK    0x00000040U	 /**< Transmit Overflow
+													Interrupt mask */
+#define XIICPS_IXR_RX_OVR_MASK    0x00000020U	 /**< Receive Overflow Interrupt
+													mask */
+#define XIICPS_IXR_SLV_RDY_MASK   0x00000010U	 /**< Monitored Slave Ready
+													Interrupt mask */
+#define XIICPS_IXR_TO_MASK        0x00000008U	 /**< Transfer Time Out
+													Interrupt mask */
+#define XIICPS_IXR_NACK_MASK      0x00000004U	 /**< NACK Interrupt mask */
+#define XIICPS_IXR_DATA_MASK      0x00000002U	 /**< Data Interrupt mask */
+#define XIICPS_IXR_COMP_MASK      0x00000001U	 /**< Transfer Complete
+													Interrupt mask */
+#define XIICPS_IXR_DEFAULT_MASK   0x000002FFU	 /**< Default ISR Mask */
+#define XIICPS_IXR_ALL_INTR_MASK  0x000002FFU	 /**< All ISR Mask */
+/* @} */
+
+
+/** @name IIC Transfer Size Register
+*
+* The register's meaning varies according to the operating mode as follows:
+*   - Master transmitter mode: number of data bytes still not transmitted minus
+*     one
+*   - Master receiver mode: number of data bytes that are still expected to be
+*     received
+*   - Slave transmitter mode: number of bytes remaining in the FIFO after the
+*     master terminates the transfer
+*   - Slave receiver mode: number of valid data bytes in the FIFO
+*
+* This register is cleared if CLR_FIFO bit in the control register is set.
+* Read/Write
+* @{
+*/
+#define XIICPS_TRANS_SIZE_MASK  0x0000003F /**< IIC Transfer Size Mask */
+#define XIICPS_FIFO_DEPTH          16	  /**< Number of bytes in the FIFO */
+#define XIICPS_DATA_INTR_DEPTH     14    /**< Number of bytes at DATA intr */
+/* @} */
+
+
+/** @name IIC Slave Monitor Pause Register
+*
+* This register is associated with the slave monitor mode of the I2C interface.
+* It is meaningful only when the module is in master mode and bit SLVMON in the
+* control register is set.
+*
+* This register defines the pause interval between consecutive attempts to
+* address the slave once a write to an I2C address register is done by the
+* host. It represents the number of sclk cycles minus one between two attempts.
+*
+* The reset value of the register is 0, which results in the master repeatedly
+* trying to access the slave immediately after unsuccessful attempt.
+* Read/Write
+* @{
+*/
+#define XIICPS_SLV_PAUSE_MASK    0x0000000F  /**< Slave monitor pause mask */
+/* @} */
+
+
+/** @name IIC Time Out Register
+*
+* The value of time out register represents the time out interval in number of
+* sclk cycles minus one.
+*
+* When the accessed slave holds the sclk line low for longer than the time out
+* period, thus prohibiting the I2C interface in master mode to complete the
+* current transfer, an interrupt is generated and TO interrupt flag is set.
+*
+* The reset value of the register is 0x1f.
+* Read/Write
+* @{
+ */
+#define XIICPS_TIME_OUT_MASK    0x000000FFU    /**< IIC Time Out mask */
+#define XIICPS_TO_RESET_VALUE   0x000000FFU    /**< IIC Time Out reset value */
+/* @} */
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#define XIicPs_In32 Xil_In32
+#define XIicPs_Out32 Xil_Out32
+
+/****************************************************************************/
+/**
+* Read an IIC register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to select the specific register.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u32 XIicPs_ReadReg(u32 BaseAddress. int RegOffset)
+*
+******************************************************************************/
+#define XIicPs_ReadReg(BaseAddress, RegOffset) \
+	XIicPs_In32((BaseAddress) + (u32)(RegOffset))
+
+/***************************************************************************/
+/**
+* Write an IIC register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to select the specific register.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note	C-Style signature:
+*	void XIicPs_WriteReg(u32 BaseAddress, int RegOffset, u32 RegisterValue)
+*
+******************************************************************************/
+#define XIicPs_WriteReg(BaseAddress, RegOffset, RegisterValue) \
+	XIicPs_Out32((BaseAddress) + (u32)(RegOffset), (u32)(RegisterValue))
+
+/***************************************************************************/
+/**
+* Read the interrupt enable register.
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @return	Current bit mask that represents currently enabled interrupts.
+*
+* @note		C-Style signature:
+*		u32 XIicPs_ReadIER(u32 BaseAddress)
+*
+******************************************************************************/
+#define XIicPs_ReadIER(BaseAddress) \
+	XIicPs_ReadReg((BaseAddress),  XIICPS_IER_OFFSET)
+
+/***************************************************************************/
+/**
+* Write to the interrupt enable register.
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @param	IntrMask is the interrupts to be enabled.
+*
+* @return	None.
+*
+* @note	C-Style signature:
+*	void XIicPs_EnabledInterrupts(u32 BaseAddress, u32 IntrMask)
+*
+******************************************************************************/
+#define XIicPs_EnableInterrupts(BaseAddress, IntrMask) \
+	XIicPs_WriteReg((BaseAddress), XIICPS_IER_OFFSET, (IntrMask))
+
+/***************************************************************************/
+/**
+* Disable all interrupts.
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XIicPs_DisableAllInterrupts(u32 BaseAddress)
+*
+******************************************************************************/
+#define XIicPs_DisableAllInterrupts(BaseAddress) \
+	XIicPs_WriteReg((BaseAddress), XIICPS_IDR_OFFSET, \
+		XIICPS_IXR_ALL_INTR_MASK)
+
+/***************************************************************************/
+/**
+* Disable selected interrupts.
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @param	IntrMask is the interrupts to be disabled.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XIicPs_DisableInterrupts(u32 BaseAddress, u32 IntrMask)
+*
+******************************************************************************/
+#define XIicPs_DisableInterrupts(BaseAddress, IntrMask) \
+	XIicPs_WriteReg((BaseAddress), XIICPS_IDR_OFFSET, \
+		(IntrMask))
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+/*
+ * Perform reset operation to the I2c interface
+ */
+void XIicPs_ResetHw(u32 BaseAddress);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_intr.c
new file mode 100644
index 000000000..de05b93b6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_intr.c
@@ -0,0 +1,101 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps_intr.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* Contains functions of the XIicPs driver for interrupt-driven transfers.
+* See xiicps.h for a detailed description of the device and driver.
+*
+* 
 MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- -----------------------------------------------
+* 1.00a drg/jz  01/30/10 First release
+* 3.00	sk		01/31/15 Modified the code according to MISRAC 2012 Compliant.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xiicps.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************* Variable Definitions *****************************/
+
+/*****************************************************************************/
+/**
+*
+* This function sets the status callback function, the status handler, which the
+* driver calls when it encounters conditions that should be reported to the
+* higher layer software. The handler executes in an interrupt context, so
+* the amount of processing should be minimized
+*
+* Refer to the xiicps.h file for a list of the Callback events. The events are
+* defined to start with XIICPS_EVENT_*.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	CallBackRef is the upper layer callback reference passed back
+*		when the callback function is invoked.
+* @param	FunctionPtr is the pointer to the callback function.
+*
+* @return	None.
+*
+* @note
+*
+* The handler is called within interrupt context, so it should finish its
+* work quickly.
+*
+******************************************************************************/
+void XIicPs_SetStatusHandler(XIicPs *InstancePtr, void *CallBackRef,
+				  XIicPs_IntrHandler FunctionPtr)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(FunctionPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	InstancePtr->StatusHandler = FunctionPtr;
+	InstancePtr->CallBackRef = CallBackRef;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_master.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_master.c
new file mode 100644
index 000000000..d49feecdf
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_master.c
@@ -0,0 +1,987 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps_master.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* Handles master mode transfers.
+*
+* 
 MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---  -------- ---------------------------------------------
+* 1.00a jz   01/30/10 First release
+* 1.00a sdm  09/21/11 Updated the XIicPs_SetupMaster to not check for
+*		      Bus Busy condition when the Hold Bit is set.
+* 1.01a sg   03/30/12 Fixed an issue in XIicPs_MasterSendPolled where a
+*		      check for transfer completion is added, which indicates
+*			 the completion of current transfer.
+* 2.0   hk   03/07/14 Added check for error status in the while loop that
+*                     checks for completion. CR# 762244, 764875.
+* 2.1   hk   04/24/14 Fix for CR# 789821 to handle >14 byte transfers.
+*                     Fix for CR# 761060 - provision for repeated start.
+* 2.2   hk   08/23/14 Slave monitor mode changes - clear FIFO, enable
+*                     read mode and clear transfer size register.
+*                     Disable NACK to avoid interrupts on each retry.
+* 2.3	sk	 10/06/14 Fill transmit fifo before address register when sending.
+* 					  Replaced XIICPS_DATA_INTR_DEPTH with XIICPS_FIFO_DEPTH.
+* 					  Repeated start feature removed.
+* 3.0	sk	 12/06/14 Implemented Repeated start feature.
+*			 01/31/15 Modified the code according to MISRAC 2012 Compliant.
+*			 02/18/15 Implemented larger data transfer using repeated start
+*					  in Zynq UltraScale MP.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xiicps.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+s32 TransmitFifoFill(XIicPs *InstancePtr);
+
+static s32 XIicPs_SetupMaster(XIicPs *InstancePtr, s32 Role);
+static void MasterSendData(XIicPs *InstancePtr);
+
+/************************* Variable Definitions *****************************/
+
+/*****************************************************************************/
+/**
+* This function initiates an interrupt-driven send in master mode.
+*
+* It tries to send the first FIFO-full of data, then lets the interrupt
+* handler to handle the rest of the data if there is any.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the send buffer.
+* @param	ByteCount is the number of bytes to be sent.
+* @param	SlaveAddr is the address of the slave we are sending to.
+*
+* @return	None.
+*
+* @note		This send routine is for interrupt-driven transfer only.
+*
+ ****************************************************************************/
+void XIicPs_MasterSend(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount,
+		 u16 SlaveAddr)
+{
+	u32 BaseAddr;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(MsgPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(XIICPS_ADDR_MASK >= SlaveAddr);
+
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	InstancePtr->SendBufferPtr = MsgPtr;
+	InstancePtr->SendByteCount = ByteCount;
+	InstancePtr->RecvBufferPtr = NULL;
+	InstancePtr->IsSend = 1;
+
+	/*
+	 * Set repeated start if sending more than FIFO of data.
+	 */
+	if (((InstancePtr->IsRepeatedStart) != 0)||
+		((ByteCount > XIICPS_FIFO_DEPTH) != 0U)) {
+		XIicPs_WriteReg(BaseAddr, (u32)XIICPS_CR_OFFSET,
+			XIicPs_ReadReg(BaseAddr, (u32)XIICPS_CR_OFFSET) |
+				(u32)XIICPS_CR_HOLD_MASK);
+	}
+
+	/*
+	 * Setup as a master sending role.
+	 */
+	(void)XIicPs_SetupMaster(InstancePtr, SENDING_ROLE);
+
+	(void)TransmitFifoFill(InstancePtr);
+
+	XIicPs_EnableInterrupts(BaseAddr,
+		(u32)XIICPS_IXR_NACK_MASK | (u32)XIICPS_IXR_COMP_MASK |
+		(u32)XIICPS_IXR_ARB_LOST_MASK);
+	/*
+	 * Do the address transfer to notify the slave.
+	 */
+	XIicPs_WriteReg(BaseAddr, XIICPS_ADDR_OFFSET, (u32)SlaveAddr);
+
+}
+
+/*****************************************************************************/
+/**
+* This function initiates an interrupt-driven receive in master mode.
+*
+* It sets the transfer size register so the slave can send data to us.
+* The rest of the work is managed by interrupt handler.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the receive buffer.
+* @param	ByteCount is the number of bytes to be received.
+* @param	SlaveAddr is the address of the slave we are receiving from.
+*
+* @return	None.
+*
+* @note		This receive routine is for interrupt-driven transfer only.
+*
+****************************************************************************/
+void XIicPs_MasterRecv(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount,
+		 u16 SlaveAddr)
+{
+	u32 BaseAddr;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(MsgPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(XIICPS_ADDR_MASK >= SlaveAddr);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	InstancePtr->RecvBufferPtr = MsgPtr;
+	InstancePtr->RecvByteCount = ByteCount;
+	InstancePtr->CurrByteCount = ByteCount;
+	InstancePtr->SendBufferPtr = NULL;
+	InstancePtr->IsSend = 0;
+	InstancePtr->UpdateTxSize = 0;
+
+	if ((ByteCount > XIICPS_FIFO_DEPTH) ||
+		((InstancePtr->IsRepeatedStart) !=0))
+	{
+		XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+				XIicPs_ReadReg(BaseAddr, (u32)XIICPS_CR_OFFSET) |
+						(u32)XIICPS_CR_HOLD_MASK);
+	}
+
+	/*
+	 * Initialize for a master receiving role.
+	 */
+	(void)XIicPs_SetupMaster(InstancePtr, RECVING_ROLE);
+	/*
+	 * Setup the transfer size register so the slave knows how much
+	 * to send to us.
+	 */
+	if (ByteCount > XIICPS_MAX_TRANSFER_SIZE) {
+		XIicPs_WriteReg(BaseAddr, XIICPS_TRANS_SIZE_OFFSET,
+				XIICPS_MAX_TRANSFER_SIZE);
+		InstancePtr->CurrByteCount = (s32)XIICPS_MAX_TRANSFER_SIZE;
+		InstancePtr->UpdateTxSize = 1;
+	}else {
+		XIicPs_WriteReg(BaseAddr, (u32)(XIICPS_TRANS_SIZE_OFFSET),
+			 (u32)ByteCount);
+	}
+
+	XIicPs_EnableInterrupts(BaseAddr,
+		(u32)XIICPS_IXR_NACK_MASK | (u32)XIICPS_IXR_DATA_MASK |
+		(u32)XIICPS_IXR_RX_OVR_MASK | (u32)XIICPS_IXR_COMP_MASK |
+		(u32)XIICPS_IXR_ARB_LOST_MASK);
+	/*
+	 * Do the address transfer to signal the slave.
+	 */
+	XIicPs_WriteReg(BaseAddr, XIICPS_ADDR_OFFSET, (u32)SlaveAddr);
+
+}
+
+/*****************************************************************************/
+/**
+* This function initiates a polled mode send in master mode.
+*
+* It sends data to the FIFO and waits for the slave to pick them up.
+* If slave fails to remove data from FIFO, the send fails with
+* time out.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the send buffer.
+* @param	ByteCount is the number of bytes to be sent.
+* @param	SlaveAddr is the address of the slave we are sending to.
+*
+* @return
+*		- XST_SUCCESS if everything went well.
+*		- XST_FAILURE if timed out.
+*
+* @note		This send routine is for polled mode transfer only.
+*
+****************************************************************************/
+s32 XIicPs_MasterSendPolled(XIicPs *InstancePtr, u8 *MsgPtr,
+		 s32 ByteCount, u16 SlaveAddr)
+{
+	u32 IntrStatusReg;
+	u32 StatusReg;
+	u32 BaseAddr;
+	u32 Intrs;
+	u32 Value;
+	s32 Status;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(MsgPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(XIICPS_ADDR_MASK >= SlaveAddr);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	InstancePtr->SendBufferPtr = MsgPtr;
+	InstancePtr->SendByteCount = ByteCount;
+
+	if (((InstancePtr->IsRepeatedStart) != 0) ||
+		((ByteCount > XIICPS_FIFO_DEPTH) != 0U)) {
+		XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+				XIicPs_ReadReg(BaseAddr, (u32)XIICPS_CR_OFFSET) |
+						(u32)XIICPS_CR_HOLD_MASK);
+	}
+
+	(void)XIicPs_SetupMaster(InstancePtr, SENDING_ROLE);
+
+	/*
+	 * Intrs keeps all the error-related interrupts.
+	 */
+	Intrs = (u32)XIICPS_IXR_ARB_LOST_MASK | (u32)XIICPS_IXR_TX_OVR_MASK |
+		(u32)XIICPS_IXR_NACK_MASK;
+
+	/*
+	 * Clear the interrupt status register before use it to monitor.
+	 */
+	IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+	XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET, IntrStatusReg);
+
+	/*
+	 * Transmit first FIFO full of data.
+	 */
+	(void)TransmitFifoFill(InstancePtr);
+
+	XIicPs_WriteReg(BaseAddr, XIICPS_ADDR_OFFSET, (u32)SlaveAddr);
+
+	IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+
+	/*
+	 * Continue sending as long as there is more data and
+	 * there are no errors.
+	 */
+	Value = ((InstancePtr->SendByteCount > (s32)0) &&
+		((IntrStatusReg & Intrs) == (u32)0U));
+	while (Value != (u32)0x00U) {
+		StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+
+		/*
+		 * Wait until transmit FIFO is empty.
+		 */
+		if ((StatusReg & XIICPS_SR_TXDV_MASK) != 0U) {
+			IntrStatusReg = XIicPs_ReadReg(BaseAddr,
+					XIICPS_ISR_OFFSET);
+			Value = ((InstancePtr->SendByteCount > (s32)0) &&
+				((IntrStatusReg & Intrs) == (u32)0U));
+			continue;
+		}
+
+		/*
+		 * Send more data out through transmit FIFO.
+		 */
+		(void)TransmitFifoFill(InstancePtr);
+		Value = ((InstancePtr->SendByteCount > (s32)0) &&
+			((IntrStatusReg & Intrs) == (u32)0U));
+	}
+
+	/*
+	 * Check for completion of transfer.
+	 */
+	while ((IntrStatusReg & XIICPS_IXR_COMP_MASK) != XIICPS_IXR_COMP_MASK){
+
+		IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+		/*
+		 * If there is an error, tell the caller.
+		 */
+		if ((IntrStatusReg & Intrs) != 0U) {
+			return (s32)XST_FAILURE;
+		}
+	}
+
+	if ((!(InstancePtr->IsRepeatedStart)) != 0) {
+		XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+				XIicPs_ReadReg(BaseAddr,XIICPS_CR_OFFSET) &
+						(~XIICPS_CR_HOLD_MASK));
+	}
+
+	return (s32)XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+* This function initiates a polled mode receive in master mode.
+*
+* It repeatedly sets the transfer size register so the slave can
+* send data to us. It polls the data register for data to come in.
+* If slave fails to send us data, it fails with time out.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the receive buffer.
+* @param	ByteCount is the number of bytes to be received.
+* @param	SlaveAddr is the address of the slave we are receiving from.
+*
+* @return
+*		- XST_SUCCESS if everything went well.
+*		- XST_FAILURE if timed out.
+*
+* @note		This receive routine is for polled mode transfer only.
+*
+****************************************************************************/
+s32 XIicPs_MasterRecvPolled(XIicPs *InstancePtr, u8 *MsgPtr,
+				s32 ByteCount, u16 SlaveAddr)
+{
+	u32 IntrStatusReg;
+	u32 Intrs;
+	u32 StatusReg;
+	u32 BaseAddr;
+	s32 BytesToRecv;
+	s32 BytesToRead;
+	s32 TransSize;
+	s32 Tmp = 0;
+	u32 Status_Rcv;
+	u32 Status;
+	s32 Result;
+	s32 IsHold = 0;
+	s32 UpdateTxSize = 0;
+	s32 ByteCountVar = ByteCount;
+	u32 Platform;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(MsgPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(XIICPS_ADDR_MASK >= SlaveAddr);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	InstancePtr->RecvBufferPtr = MsgPtr;
+	InstancePtr->RecvByteCount = ByteCountVar;
+
+	Platform = XGetPlatform_Info();
+
+	if((ByteCountVar > XIICPS_FIFO_DEPTH) ||
+		((InstancePtr->IsRepeatedStart) !=0))
+	{
+		XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+				XIicPs_ReadReg(BaseAddr, (u32)XIICPS_CR_OFFSET) |
+						(u32)XIICPS_CR_HOLD_MASK);
+		IsHold = 1;
+	}
+
+	(void)XIicPs_SetupMaster(InstancePtr, RECVING_ROLE);
+
+	/*
+	 * Clear the interrupt status register before use it to monitor.
+	 */
+	IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+	XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET, IntrStatusReg);
+
+	XIicPs_WriteReg(BaseAddr, XIICPS_ADDR_OFFSET, SlaveAddr);
+
+	/*
+	 * Set up the transfer size register so the slave knows how much
+	 * to send to us.
+	 */
+	if (ByteCountVar > XIICPS_MAX_TRANSFER_SIZE) {
+		XIicPs_WriteReg(BaseAddr, XIICPS_TRANS_SIZE_OFFSET,
+				XIICPS_MAX_TRANSFER_SIZE);
+		ByteCountVar = (s32)XIICPS_MAX_TRANSFER_SIZE;
+		UpdateTxSize = 1;
+	}else {
+		XIicPs_WriteReg(BaseAddr, XIICPS_TRANS_SIZE_OFFSET,
+			 ByteCountVar);
+	}
+
+	/*
+	 * Intrs keeps all the error-related interrupts.
+	 */
+	Intrs = (u32)XIICPS_IXR_ARB_LOST_MASK | (u32)XIICPS_IXR_RX_OVR_MASK |
+			(u32)XIICPS_IXR_RX_UNF_MASK | (u32)XIICPS_IXR_NACK_MASK;
+	/*
+	 * Poll the interrupt status register to find the errors.
+	 */
+	IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+	while ((InstancePtr->RecvByteCount > 0) &&
+			((IntrStatusReg & Intrs) == 0U)) {
+		StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+
+	    while ((StatusReg & XIICPS_SR_RXDV_MASK) != 0U) {
+		    if (((InstancePtr->RecvByteCount <
+			    XIICPS_DATA_INTR_DEPTH) != 0U) && (IsHold != 0) &&
+			    ((!InstancePtr->IsRepeatedStart) != 0) &&
+			    (UpdateTxSize == 0)) {
+				IsHold = 0;
+				XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+						XIicPs_ReadReg(BaseAddr,
+						XIICPS_CR_OFFSET) &
+						(~XIICPS_CR_HOLD_MASK));
+			}
+			XIicPs_RecvByte(InstancePtr);
+		    ByteCountVar --;
+
+			if (Platform == XPLAT_ZYNQ) {
+			    if ((UpdateTxSize != 0) &&
+				    ((ByteCountVar == (XIICPS_FIFO_DEPTH + 1)) != 0U)) {
+				    break;
+				}
+			}
+
+			StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+		}
+		if (Platform == XPLAT_ZYNQ) {
+			if ((UpdateTxSize != 0) &&
+				((ByteCountVar == (XIICPS_FIFO_DEPTH + 1)) != 0U)) {
+			    /*  wait while fifo is full */
+			    while (XIicPs_ReadReg(BaseAddr,
+				    XIICPS_TRANS_SIZE_OFFSET) !=
+				    (u32)(ByteCountVar - XIICPS_FIFO_DEPTH)) { ;
+				}
+
+				if ((InstancePtr->RecvByteCount - XIICPS_FIFO_DEPTH) >
+					XIICPS_MAX_TRANSFER_SIZE) {
+
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						XIICPS_MAX_TRANSFER_SIZE);
+				    ByteCountVar = (s32)XIICPS_MAX_TRANSFER_SIZE +
+							XIICPS_FIFO_DEPTH;
+				} else {
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						InstancePtr->RecvByteCount -
+						XIICPS_FIFO_DEPTH);
+					UpdateTxSize = 0;
+				    ByteCountVar = InstancePtr->RecvByteCount;
+				}
+			}
+		} else {
+		    if ((InstancePtr->RecvByteCount > 0) && (ByteCountVar == 0)) {
+				/*
+				 * Clear the interrupt status register before use it to
+				 * monitor.
+				 */
+				IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+				XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET, IntrStatusReg);
+
+				XIicPs_WriteReg(BaseAddr, XIICPS_ADDR_OFFSET, SlaveAddr);
+
+				if ((InstancePtr->RecvByteCount) >
+					XIICPS_MAX_TRANSFER_SIZE) {
+
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						XIICPS_MAX_TRANSFER_SIZE);
+				    ByteCountVar = (s32)XIICPS_MAX_TRANSFER_SIZE;
+				} else {
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						InstancePtr->RecvByteCount);
+					UpdateTxSize = 0;
+				    ByteCountVar = InstancePtr->RecvByteCount;
+				}
+			}
+		}
+
+		IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+	}
+
+	if ((!(InstancePtr->IsRepeatedStart)) != 0) {
+		XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+				XIicPs_ReadReg(BaseAddr,XIICPS_CR_OFFSET) &
+						(~XIICPS_CR_HOLD_MASK));
+	}
+	if ((IntrStatusReg & Intrs) != 0x0U) {
+		Result = (s32)XST_FAILURE;
+	}
+	else {
+		Result =  (s32)XST_SUCCESS;
+	}
+
+	return Result;
+}
+
+/*****************************************************************************/
+/**
+* This function enables the slave monitor mode.
+*
+* It enables slave monitor in the control register and enables
+* slave ready interrupt. It then does an address transfer to slave.
+* Interrupt handler will signal the caller if slave responds to
+* the address transfer.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	SlaveAddr is the address of the slave we want to contact.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void XIicPs_EnableSlaveMonitor(XIicPs *InstancePtr, u16 SlaveAddr)
+{
+	u32 BaseAddr;
+	u32 ConfigReg;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+
+	/* Clear transfer size register */
+	XIicPs_WriteReg(BaseAddr, (u32)XIICPS_TRANS_SIZE_OFFSET, 0x0U);
+
+	/*
+	 * Enable slave monitor mode in control register.
+	 */
+	ConfigReg = XIicPs_ReadReg(BaseAddr, (u32)XIICPS_CR_OFFSET);
+	ConfigReg |= (u32)XIICPS_CR_MS_MASK | (u32)XIICPS_CR_NEA_MASK |
+			(u32)XIICPS_CR_CLR_FIFO_MASK | (u32)XIICPS_CR_SLVMON_MASK;
+	ConfigReg &= (u32)(~XIICPS_CR_RD_WR_MASK);
+
+	XIicPs_WriteReg(BaseAddr, (u32)XIICPS_CR_OFFSET, ConfigReg);
+
+	/*
+	 * Set up interrupt flag for slave monitor interrupt.
+	 * Dont enable NACK.
+	 */
+	XIicPs_EnableInterrupts(BaseAddr, (u32)XIICPS_IXR_SLV_RDY_MASK);
+
+	/*
+	 * Initialize the slave monitor register.
+	 */
+	XIicPs_WriteReg(BaseAddr, (u32)XIICPS_SLV_PAUSE_OFFSET, 0xFU);
+
+	/*
+	 * Set the slave address to start the slave address transmission.
+	 */
+	XIicPs_WriteReg(BaseAddr, (u32)XIICPS_ADDR_OFFSET, (u32)SlaveAddr);
+
+	return;
+}
+
+/*****************************************************************************/
+/**
+* This function disables slave monitor mode.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void XIicPs_DisableSlaveMonitor(XIicPs *InstancePtr)
+{
+	u32 BaseAddr;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+
+	/*
+	 * Clear slave monitor control bit.
+	 */
+	XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+		XIicPs_ReadReg(BaseAddr, XIICPS_CR_OFFSET)
+			& (~XIICPS_CR_SLVMON_MASK));
+
+	/*
+	 * Clear interrupt flag for slave monitor interrupt.
+	 */
+	XIicPs_DisableInterrupts(BaseAddr, XIICPS_IXR_SLV_RDY_MASK);
+
+	return;
+}
+
+/*****************************************************************************/
+/**
+* The interrupt handler for the master mode. It does the protocol handling for
+* the interrupt-driven transfers.
+*
+* Completion events and errors are signaled to upper layer for proper handling.
+*
+* 
+* The interrupts that are handled are:
+* - DATA
+*	This case is handled only for master receive data.
+*	The master has to request for more data (if there is more data to
+*	receive) and read the data from the FIFO .
+*
+* - COMP
+*	If the Master is transmitting data and there is more data to be
+*	sent then the data is written to the FIFO. If there is no more data to
+*	be transmitted then a completion event is signalled to the upper layer
+*	by calling the callback handler.
+*
+*	If the Master is receiving data then the data is read from the FIFO and
+*	the Master has to request for more data (if there is more data to
+*	receive). If all the data has been received then a completion event
+*	is signalled to the upper layer by calling the callback handler.
+*	It is an error if the amount of received data is more than expected.
+*
+* - NAK and SLAVE_RDY
+*	This is signalled to the upper layer by calling the callback handler.
+*
+* - All Other interrupts
+*	These interrupts are marked as error. This is signalled to the upper
+*	layer by calling the callback handler.
+*
+* 

+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	None.
+*
+* @note 	None.
+*
+****************************************************************************/
+void XIicPs_MasterInterruptHandler(XIicPs *InstancePtr)
+{
+	u32 IntrStatusReg;
+	u32 StatusEvent = 0U;
+	u32 BaseAddr;
+	u16 SlaveAddr;
+	s32 ByteCnt;
+	s32 IsHold;
+	u32 Platform;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+
+	Platform = XGetPlatform_Info();
+
+	/*
+	 * Read the Interrupt status register.
+	 */
+	IntrStatusReg = XIicPs_ReadReg(BaseAddr,
+					 (u32)XIICPS_ISR_OFFSET);
+
+	/*
+	 * Write the status back to clear the interrupts so no events are
+	 * missed while processing this interrupt.
+	 */
+	XIicPs_WriteReg(BaseAddr, (u32)XIICPS_ISR_OFFSET, IntrStatusReg);
+
+	/*
+	 * Use the Mask register AND with the Interrupt Status register so
+	 * disabled interrupts are not processed.
+	 */
+	IntrStatusReg &= ~(XIicPs_ReadReg(BaseAddr, (u32)XIICPS_IMR_OFFSET));
+
+	ByteCnt = InstancePtr->CurrByteCount;
+
+	IsHold = 0;
+	if ((XIicPs_ReadReg(BaseAddr, (u32)XIICPS_CR_OFFSET) & (u32)XIICPS_CR_HOLD_MASK) != 0U) {
+		IsHold = 1;
+	}
+
+	/*
+	 * Send
+	 */
+	if (((InstancePtr->IsSend) != 0) &&
+		((u32)0U != (IntrStatusReg & (u32)XIICPS_IXR_COMP_MASK))) {
+		if (InstancePtr->SendByteCount > 0) {
+			MasterSendData(InstancePtr);
+		} else {
+			StatusEvent |= XIICPS_EVENT_COMPLETE_SEND;
+		}
+	}
+
+
+	/*
+	 * Receive
+	 */
+	if (((!(InstancePtr->IsSend))!= 0) &&
+		((0 != (IntrStatusReg & (u32)XIICPS_IXR_DATA_MASK)) ||
+		(0 != (IntrStatusReg & (u32)XIICPS_IXR_COMP_MASK)))){
+
+		while ((XIicPs_ReadReg(BaseAddr, (u32)XIICPS_SR_OFFSET) &
+				XIICPS_SR_RXDV_MASK) != 0U) {
+			if (((InstancePtr->RecvByteCount <
+				XIICPS_DATA_INTR_DEPTH)!= 0U)  && (IsHold != 0)  &&
+				((!InstancePtr->IsRepeatedStart)!= 0) &&
+				(InstancePtr->UpdateTxSize == 0)) {
+				IsHold = 0;
+				XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+						XIicPs_ReadReg(BaseAddr,
+						XIICPS_CR_OFFSET) &
+						(~XIICPS_CR_HOLD_MASK));
+			}
+			XIicPs_RecvByte(InstancePtr);
+			ByteCnt--;
+
+			if (Platform == XPLAT_ZYNQ) {
+			    if ((InstancePtr->UpdateTxSize != 0) &&
+				    ((ByteCnt == (XIICPS_FIFO_DEPTH + 1)) != 0U)) {
+				    break;
+				}
+			}
+		}
+
+		if (Platform == XPLAT_ZYNQ) {
+			if ((InstancePtr->UpdateTxSize != 0) &&
+				((ByteCnt == (XIICPS_FIFO_DEPTH + 1))!= 0U)) {
+				/* wait while fifo is full */
+				while (XIicPs_ReadReg(BaseAddr,
+					XIICPS_TRANS_SIZE_OFFSET) !=
+					(u32)(ByteCnt - XIICPS_FIFO_DEPTH)) {
+				}
+
+				if ((InstancePtr->RecvByteCount - XIICPS_FIFO_DEPTH) >
+					XIICPS_MAX_TRANSFER_SIZE) {
+
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						XIICPS_MAX_TRANSFER_SIZE);
+					ByteCnt = (s32)XIICPS_MAX_TRANSFER_SIZE +
+							XIICPS_FIFO_DEPTH;
+				} else {
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						InstancePtr->RecvByteCount -
+						XIICPS_FIFO_DEPTH);
+					InstancePtr->UpdateTxSize = 0;
+					ByteCnt = InstancePtr->RecvByteCount;
+				}
+			}
+		} else {
+			if ((InstancePtr->RecvByteCount > 0) && (ByteCnt == 0)) {
+				/*
+				 * Clear the interrupt status register before use it to
+				 * monitor.
+				 */
+				IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+				XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET, IntrStatusReg);
+
+				SlaveAddr = XIicPs_ReadReg(BaseAddr, (u32)XIICPS_ADDR_OFFSET);
+				XIicPs_WriteReg(BaseAddr, XIICPS_ADDR_OFFSET, SlaveAddr);
+
+				if ((InstancePtr->RecvByteCount) >
+					XIICPS_MAX_TRANSFER_SIZE) {
+
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						XIICPS_MAX_TRANSFER_SIZE);
+					ByteCnt = (s32)XIICPS_MAX_TRANSFER_SIZE;
+				} else {
+					XIicPs_WriteReg(BaseAddr,
+						XIICPS_TRANS_SIZE_OFFSET,
+						InstancePtr->RecvByteCount);
+					InstancePtr->UpdateTxSize = 0;
+					ByteCnt = InstancePtr->RecvByteCount;
+				}
+				XIicPs_EnableInterrupts(BaseAddr,
+					(u32)XIICPS_IXR_NACK_MASK | (u32)XIICPS_IXR_DATA_MASK |
+					(u32)XIICPS_IXR_RX_OVR_MASK | (u32)XIICPS_IXR_COMP_MASK |
+					(u32)XIICPS_IXR_ARB_LOST_MASK);
+			}
+		}
+		InstancePtr->CurrByteCount = ByteCnt;
+	}
+
+	if (((!(InstancePtr->IsSend)) != 0) &&
+		(0U != (IntrStatusReg & XIICPS_IXR_COMP_MASK))) {
+		/*
+		 * If all done, tell the application.
+		 */
+		if (InstancePtr->RecvByteCount == 0){
+			if ((!(InstancePtr->IsRepeatedStart)) != 0) {
+				XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+						XIicPs_ReadReg(BaseAddr,
+						XIICPS_CR_OFFSET) &
+						(~XIICPS_CR_HOLD_MASK));
+			}
+			StatusEvent |= XIICPS_EVENT_COMPLETE_RECV;
+		}
+	}
+
+
+	/*
+	 * Slave ready interrupt, it is only meaningful for master mode.
+	 */
+	if (0U != (IntrStatusReg & XIICPS_IXR_SLV_RDY_MASK)) {
+		StatusEvent |= XIICPS_EVENT_SLAVE_RDY;
+	}
+
+	if (0U != (IntrStatusReg & XIICPS_IXR_NACK_MASK)) {
+		if ((!(InstancePtr->IsRepeatedStart)) != 0 ) {
+			XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+					XIicPs_ReadReg(BaseAddr,
+					XIICPS_CR_OFFSET) &
+					(~XIICPS_CR_HOLD_MASK));
+		}
+		StatusEvent |= XIICPS_EVENT_NACK;
+	}
+
+	/*
+	 * Arbitration lost interrupt
+	 */
+	if (0U != (IntrStatusReg & XIICPS_IXR_ARB_LOST_MASK)) {
+		StatusEvent |= XIICPS_EVENT_ARB_LOST;
+	}
+
+	/*
+	 * All other interrupts are treated as error.
+	 */
+	if (0U != (IntrStatusReg & (XIICPS_IXR_NACK_MASK |
+			XIICPS_IXR_RX_UNF_MASK | XIICPS_IXR_TX_OVR_MASK |
+			XIICPS_IXR_RX_OVR_MASK))) {
+		if ((!(InstancePtr->IsRepeatedStart)) != 0) {
+			XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+					XIicPs_ReadReg(BaseAddr,
+					XIICPS_CR_OFFSET) &
+					(~XIICPS_CR_HOLD_MASK));
+		}
+		StatusEvent |= XIICPS_EVENT_ERROR;
+	}
+
+	/*
+	 * Signal application if there are any events.
+	 */
+	if (StatusEvent != 0U) {
+		InstancePtr->StatusHandler(InstancePtr->CallBackRef,
+					   StatusEvent);
+	}
+
+}
+
+/*****************************************************************************/
+/*
+* This function prepares a device to transfers as a master.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @param	Role specifies whether the device is sending or receiving.
+*
+* @return
+*		- XST_SUCCESS if everything went well.
+*		- XST_FAILURE if bus is busy.
+*
+* @note		Interrupts are always disabled, device which needs to use
+*		interrupts needs to setup interrupts after this call.
+*
+****************************************************************************/
+static s32 XIicPs_SetupMaster(XIicPs *InstancePtr, s32 Role)
+{
+	u32 ControlReg;
+	u32 BaseAddr;
+	u32 EnabledIntr = 0x0U;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	ControlReg = XIicPs_ReadReg(BaseAddr, XIICPS_CR_OFFSET);
+
+
+	/*
+	 * Only check if bus is busy when repeated start option is not set.
+	 */
+	if ((ControlReg & XIICPS_CR_HOLD_MASK) == 0U) {
+		if (XIicPs_BusIsBusy(InstancePtr) == (s32)1) {
+			return (s32)XST_FAILURE;
+		}
+	}
+
+	/*
+	 * Set up master, AckEn, nea and also clear fifo.
+	 */
+	ControlReg |= (u32)XIICPS_CR_ACKEN_MASK | (u32)XIICPS_CR_CLR_FIFO_MASK |
+			(u32)XIICPS_CR_NEA_MASK | (u32)XIICPS_CR_MS_MASK;
+
+	if (Role == RECVING_ROLE) {
+		ControlReg |= (u32)XIICPS_CR_RD_WR_MASK;
+		EnabledIntr = (u32)XIICPS_IXR_DATA_MASK |(u32)XIICPS_IXR_RX_OVR_MASK;
+	}else {
+		ControlReg &= (u32)(~XIICPS_CR_RD_WR_MASK);
+	}
+	EnabledIntr |= (u32)XIICPS_IXR_COMP_MASK | (u32)XIICPS_IXR_ARB_LOST_MASK;
+
+	XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET, ControlReg);
+
+	XIicPs_DisableAllInterrupts(BaseAddr);
+
+	return (s32)XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/*
+* This function handles continuation of sending data. It is invoked
+* from interrupt handler.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+static void MasterSendData(XIicPs *InstancePtr)
+{
+	(void)TransmitFifoFill(InstancePtr);
+
+	/*
+	 * Clear hold bit if done, so stop can be sent out.
+	 */
+	if (InstancePtr->SendByteCount == 0) {
+
+		/*
+		 * If user has enabled repeated start as an option,
+		 * do not disable it.
+		 */
+		if ((!(InstancePtr->IsRepeatedStart)) != 0) {
+
+			XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			(u32)XIICPS_CR_OFFSET,
+			XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+			(u32)XIICPS_CR_OFFSET) & (u32)(~ XIICPS_CR_HOLD_MASK));
+		}
+	}
+
+	return;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_options.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_options.c
new file mode 100644
index 000000000..5d7427a48
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_options.c
@@ -0,0 +1,496 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps_options.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* Contains functions for the configuration of the XIccPs driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- -----------------------------------------------
+* 1.00a drg/jz  01/30/10 First release
+* 1.02a sg	08/29/12 Updated the logic to arrive at the best divisors
+*			 to achieve I2C clock with minimum error.
+*			 This is a fix for CR #674195
+* 1.03a hk  05/04/13 Initialized BestDivA and BestDivB to 0.
+*			 This is fix for CR#704398 to remove warning.
+* 2.0   hk  03/07/14 Limited frequency set when 100KHz or 400KHz is
+*                    selected. This is a hardware limitation. CR#779290.
+* 2.1   hk  04/24/14 Fix for CR# 761060 - provision for repeated start.
+* 2.3	sk	10/07/14 Repeated start feature removed.
+* 3.0	sk	12/06/14 Implemented Repeated start feature.
+*			01/31/15 Modified the code according to MISRAC 2012 Compliant.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xiicps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+/*
+ * Create the table of options which are processed to get/set the device
+ * options. These options are table driven to allow easy maintenance and
+ * expansion of the options.
+ */
+typedef struct {
+		u32 Option;
+		u32 Mask;
+} OptionsMap;
+
+static OptionsMap OptionsTable[] = {
+		{XIICPS_7_BIT_ADDR_OPTION, XIICPS_CR_NEA_MASK},
+		{XIICPS_10_BIT_ADDR_OPTION, XIICPS_CR_NEA_MASK},
+		{XIICPS_SLAVE_MON_OPTION, XIICPS_CR_SLVMON_MASK},
+		{XIICPS_REP_START_OPTION, XIICPS_CR_HOLD_MASK},
+};
+
+#define XIICPS_NUM_OPTIONS      (sizeof(OptionsTable) / sizeof(OptionsMap))
+
+/*****************************************************************************/
+/**
+*
+* This function sets the options for the IIC device driver. The options control
+* how the device behaves relative to the IIC bus. The device must be idle
+* rather than busy transferring data before setting these device options.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	Options contains the specified options to be set. This is a bit
+*		mask where a 1 means to turn the option on. One or more bit
+*		values may be contained in the mask. See the bit definitions
+*		named XIICPS_*_OPTION in xiicps.h.
+*
+* @return
+*		- XST_SUCCESS if options are successfully set.
+*		- XST_DEVICE_IS_STARTED if the device is currently transferring
+*		data. The transfer must complete or be aborted before setting
+*		options.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XIicPs_SetOptions(XIicPs *InstancePtr, u32 Options)
+{
+	u32 ControlReg;
+	u32 Index;
+	u32 OptionsVar = Options;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	ControlReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+				      XIICPS_CR_OFFSET);
+
+	/*
+	 * If repeated start option is requested, set the flag.
+	 * The hold bit in CR will be written by driver when the next transfer
+	 * is initiated.
+	 */
+	if ((OptionsVar & XIICPS_REP_START_OPTION) != 0U ) {
+		InstancePtr->IsRepeatedStart = 1;
+		OptionsVar = OptionsVar & (~XIICPS_REP_START_OPTION);
+	}
+
+	/*
+	 * Loop through the options table, turning the option on.
+	 */
+	for (Index = 0U; Index < XIICPS_NUM_OPTIONS; Index++) {
+		if ((OptionsVar & OptionsTable[Index].Option) != (u32)0x0U) {
+			/*
+			 * 10-bit option is specially treated, because it is
+			 * using the 7-bit option, so turning it on means
+			 * turning 7-bit option off.
+			 */
+			if ((OptionsTable[Index].Option &
+				XIICPS_10_BIT_ADDR_OPTION) != (u32)0x0U) {
+				/* Turn 7-bit off */
+				ControlReg &= ~OptionsTable[Index].Mask;
+			} else {
+				/* Turn 7-bit on */
+				ControlReg |= OptionsTable[Index].Mask;
+			}
+		}
+	}
+
+	/*
+	 * Now write to the control register. Leave it to the upper layers
+	 * to restart the device.
+	 */
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress, XIICPS_CR_OFFSET,
+			  ControlReg);
+
+	/*
+	 * Keep a copy of what options this instance has.
+	 */
+	InstancePtr->Options = XIicPs_GetOptions(InstancePtr);
+
+	return (s32)XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function clears the options for the IIC device driver. The options
+* control how the device behaves relative to the IIC bus. The device must be
+* idle rather than busy transferring data before setting these device options.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	Options contains the specified options to be cleared. This is a
+*		bit mask where a 1 means to turn the option off. One or more bit
+*		values may be contained in the mask. See the bit definitions
+*		named XIICPS_*_OPTION in xiicps.h.
+*
+* @return
+*		- XST_SUCCESS if options are successfully set.
+*		- XST_DEVICE_IS_STARTED if the device is currently transferring
+*		data. The transfer must complete or be aborted before setting
+*		options.
+*
+* @note		None
+*
+******************************************************************************/
+s32 XIicPs_ClearOptions(XIicPs *InstancePtr, u32 Options)
+{
+	u32 ControlReg;
+	u32 Index;
+	u32 OptionsVar = Options;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	ControlReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XIICPS_CR_OFFSET);
+
+	/*
+	 * If repeated start option is cleared, set the flag.
+	 * The hold bit in CR will be cleared by driver when the
+	 * following transfer ends.
+	 */
+	if ((OptionsVar & XIICPS_REP_START_OPTION) != (u32)0x0U ) {
+		InstancePtr->IsRepeatedStart = 0;
+		OptionsVar = OptionsVar & (~XIICPS_REP_START_OPTION);
+	}
+
+	/*
+	 * Loop through the options table and clear the specified options.
+	 */
+	for (Index = 0U; Index < XIICPS_NUM_OPTIONS; Index++) {
+		if ((OptionsVar & OptionsTable[Index].Option) != (u32)0x0U) {
+
+			/*
+			 * 10-bit option is specially treated, because it is
+			 * using the 7-bit option, so clearing it means turning
+			 * 7-bit option on.
+			 */
+			if ((OptionsTable[Index].Option &
+				XIICPS_10_BIT_ADDR_OPTION) != (u32)0x0U) {
+
+				/* Turn 7-bit on */
+				ControlReg |= OptionsTable[Index].Mask;
+			} else {
+
+				/* Turn 7-bit off */
+				ControlReg &= ~OptionsTable[Index].Mask;
+			}
+		}
+	}
+
+
+	/*
+	 * Now write the control register. Leave it to the upper layers
+	 * to restart the device.
+	 */
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress, XIICPS_CR_OFFSET,
+			  ControlReg);
+
+	/*
+	 * Keep a copy of what options this instance has.
+	 */
+	InstancePtr->Options = XIicPs_GetOptions(InstancePtr);
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function gets the options for the IIC device. The options control how
+* the device behaves relative to the IIC bus.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	32 bit mask of the options, where a 1 means the option is on,
+*		and a 0 means to the option is off. One or more bit values may
+*		be contained in the mask. See the bit definitions named
+* 		XIICPS_*_OPTION in the file xiicps.h.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 XIicPs_GetOptions(XIicPs *InstancePtr)
+{
+	u32 OptionsFlag = 0U;
+	u32 ControlReg;
+	u32 Index;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read control register to find which options are currently set.
+	 */
+	ControlReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+				      XIICPS_CR_OFFSET);
+
+	/*
+	 * Loop through the options table to determine which options are set.
+	 */
+	for (Index = 0U; Index < XIICPS_NUM_OPTIONS; Index++) {
+		if ((ControlReg & OptionsTable[Index].Mask) != (u32)0x0U) {
+			OptionsFlag |= OptionsTable[Index].Option;
+		}
+		if ((ControlReg & XIICPS_CR_NEA_MASK) == (u32)0x0U) {
+			OptionsFlag |= XIICPS_10_BIT_ADDR_OPTION;
+		}
+	}
+
+	if (InstancePtr->IsRepeatedStart != 0 ) {
+		OptionsFlag |= XIICPS_REP_START_OPTION;
+	}
+	return OptionsFlag;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the serial clock rate for the IIC device. The device
+* must be idle rather than busy transferring data before setting these device
+* options.
+*
+* The data rate is set by values in the control register. The formula for
+* determining the correct register values is:
+* Fscl = Fpclk/(22 x (divisor_a+1) x (divisor_b+1))
+* See the hardware data sheet for a full explanation of setting the serial
+* clock rate.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	FsclHz is the clock frequency in Hz. The two most common clock
+*		rates are 100KHz and 400KHz.
+*
+* @return
+*		- XST_SUCCESS if options are successfully set.
+*		- XST_DEVICE_IS_STARTED if the device is currently transferring
+*		data. The transfer must complete or be aborted before setting
+*		options.
+*		- XST_FAILURE if the Fscl frequency can not be set.
+*
+* @note		The clock can not be faster than the input clock divide by 22.
+*
+******************************************************************************/
+s32 XIicPs_SetSClk(XIicPs *InstancePtr, u32 FsclHz)
+{
+	u32 Div_a;
+	u32 Div_b;
+	u32 ActualFscl;
+	u32 Temp;
+	u32 TempLimit;
+	u32 LastError;
+	u32 BestError;
+	u32 CurrentError;
+	u32 ControlReg;
+	u32 CalcDivA;
+	u32 CalcDivB;
+	u32 BestDivA = 0;
+	u32 BestDivB = 0;
+	u32 FsclHzVar = FsclHz;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(FsclHzVar > 0U);
+
+	if (0U != XIicPs_In32((InstancePtr->Config.BaseAddress) +
+					XIICPS_TRANS_SIZE_OFFSET)) {
+		return (s32)XST_DEVICE_IS_STARTED;
+	}
+
+	/*
+	 * Assume Div_a is 0 and calculate (divisor_a+1) x (divisor_b+1).
+	 */
+	Temp = (InstancePtr->Config.InputClockHz) / ((u32)22U * FsclHzVar);
+
+	/*
+	 * If the answer is negative or 0, the Fscl input is out of range.
+	 */
+	if ((u32)(0U) == Temp) {
+		return (s32)XST_FAILURE;
+	}
+
+	/*
+	 * If frequency 400KHz is selected, 384.6KHz should be set.
+	 * If frequency 100KHz is selected, 90KHz should be set.
+	 * This is due to a hardware limitation.
+	 */
+	if(FsclHzVar > 384600U) {
+		FsclHzVar = 384600U;
+	}
+
+	if((FsclHzVar <= 100000U) && (FsclHzVar > 90000U)) {
+		FsclHzVar = 90000U;
+	}
+
+	/*
+	 * TempLimit helps in iterating over the consecutive value of Temp to
+	 * find the closest clock rate achievable with divisors.
+	 * Iterate over the next value only if fractional part is involved.
+	 */
+	TempLimit = (((InstancePtr->Config.InputClockHz) %
+			((u32)22 * FsclHzVar)) != 	(u32)0x0U) ?
+						Temp + (u32)1U : Temp;
+	BestError = FsclHzVar;
+
+	BestDivA = 0U;
+	BestDivB = 0U;
+	for ( ; Temp <= TempLimit ; Temp++)
+	{
+		LastError = FsclHzVar;
+		CalcDivA = 0U;
+		CalcDivB = 0U;
+
+		for (Div_b = 0U; Div_b < 64U; Div_b++) {
+
+			Div_a = Temp / (Div_b + 1U);
+
+			if (Div_a != 0U){
+				Div_a = Div_a - (u32)1U;
+			}
+			if (Div_a > 3U){
+				continue;
+			}
+			ActualFscl = (InstancePtr->Config.InputClockHz) /
+						(22U * (Div_a + 1U) * (Div_b + 1U));
+
+			if (ActualFscl > FsclHzVar){
+				CurrentError = (ActualFscl - FsclHzVar);}
+			else{
+				CurrentError = (FsclHzVar - ActualFscl);}
+
+			if (LastError > CurrentError) {
+				CalcDivA = Div_a;
+				CalcDivB = Div_b;
+				LastError = CurrentError;
+			}
+		}
+
+		/*
+		 * Used to capture the best divisors.
+		 */
+		if (LastError < BestError) {
+			BestError = LastError;
+			BestDivA = CalcDivA;
+			BestDivB = CalcDivB;
+		}
+	}
+
+
+	/*
+	 * Read the control register and mask the Divisors.
+	 */
+	ControlReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  (u32)XIICPS_CR_OFFSET);
+	ControlReg &= ~((u32)XIICPS_CR_DIV_A_MASK | (u32)XIICPS_CR_DIV_B_MASK);
+	ControlReg |= (BestDivA << XIICPS_CR_DIV_A_SHIFT) |
+		(BestDivB << XIICPS_CR_DIV_B_SHIFT);
+
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress, (u32)XIICPS_CR_OFFSET,
+			  ControlReg);
+
+	return (s32)XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function gets the serial clock rate for the IIC device. The device
+* must be idle rather than busy transferring data before setting these device
+* options.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	The value of the IIC clock to the nearest Hz based on the
+*		control register settings. The actual value may not be exact to
+*		to integer math rounding errors.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 XIicPs_GetSClk(XIicPs *InstancePtr)
+{
+	u32 ControlReg;
+	u32 ActualFscl;
+	u32 Div_a;
+	u32 Div_b;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	ControlReg = XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XIICPS_CR_OFFSET);
+
+	Div_a = (ControlReg & XIICPS_CR_DIV_A_MASK) >> XIICPS_CR_DIV_A_SHIFT;
+	Div_b = (ControlReg & XIICPS_CR_DIV_B_MASK) >> XIICPS_CR_DIV_B_SHIFT;
+
+	ActualFscl = (InstancePtr->Config.InputClockHz) /
+		(22U * (Div_a + 1U) * (Div_b + 1U));
+
+	return ActualFscl;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_selftest.c
new file mode 100644
index 000000000..2d9e0e35e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_selftest.c
@@ -0,0 +1,132 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps_selftest.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* This component contains the implementation of selftest functions for the
+* XIicPs driver component.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------
+* 1.00a drg/jz 01/30/10 First release
+* 1.00a sdm    09/22/11 Removed unused code
+* 3.0	sk	   11/03/14 Removed TimeOut Register value check
+*			   01/31/15	Modified the code according to MISRAC 2012 Compliant.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xiicps.h"
+
+/************************** Constant Definitions *****************************/
+
+#define REG_TEST_VALUE    0x00000005U
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+*
+* Runs a self-test on the driver/device. The self-test is destructive in that
+* a reset of the device is performed in order to check the reset values of
+* the registers and to get the device into a known state.
+*
+* Upon successful return from the self-test, the device is reset.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_REGISTER_ERROR indicates a register did not read or write
+*		correctly
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XIicPs_SelfTest(XIicPs *InstancePtr)
+{
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	/*
+	 * All the IIC registers should be in their default state right now.
+	 */
+	if ((XIICPS_CR_RESET_VALUE !=
+		 XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XIICPS_CR_OFFSET)) ||
+		(XIICPS_IXR_ALL_INTR_MASK !=
+		 XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XIICPS_IMR_OFFSET))) {
+		return (s32)XST_FAILURE;
+	}
+
+	XIicPs_Reset(InstancePtr);
+
+	/*
+	 * Write, Read then write a register
+	 */
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XIICPS_SLV_PAUSE_OFFSET, REG_TEST_VALUE);
+
+	if (REG_TEST_VALUE != XIicPs_ReadReg(InstancePtr->Config.BaseAddress,
+						   XIICPS_SLV_PAUSE_OFFSET)) {
+		return (s32)XST_FAILURE;
+	}
+
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XIICPS_SLV_PAUSE_OFFSET, 0U);
+
+	XIicPs_Reset(InstancePtr);
+
+	return (s32)XST_SUCCESS;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_sinit.c
new file mode 100644
index 000000000..40ee7733e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_sinit.c
@@ -0,0 +1,102 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xiicps_sinit.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* The implementation of the XIicPs component's static initialization
+* functionality.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- --------------------------------------------
+* 1.00a drg/jz 01/30/10 First release
+* 3.00	sk	   01/31/15	Modified the code according to MISRAC 2012 Compliant.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xparameters.h"
+#include "xiicps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+extern XIicPs_Config XIicPs_ConfigTable[XPAR_XIICPS_NUM_INSTANCES];
+
+/*****************************************************************************/
+/**
+*
+* Looks up the device configuration based on the unique device ID. A table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId contains the ID of the device to look up the
+*		configuration for.
+*
+* @return	A pointer to the configuration found or NULL if the specified
+*		device ID was not found. See xiicps.h for the definition of
+*		XIicPs_Config.
+*
+* @note		None.
+*
+******************************************************************************/
+XIicPs_Config *XIicPs_LookupConfig(u16 DeviceId)
+{
+	XIicPs_Config *CfgPtr = NULL;
+	s32 Index;
+
+	for (Index = 0; Index < XPAR_XIICPS_NUM_INSTANCES; Index++) {
+		if (XIicPs_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XIicPs_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XIicPs_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_slave.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_slave.c
new file mode 100644
index 000000000..074b5ea2e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/iicps_v3_1/src/xiicps_slave.c
@@ -0,0 +1,590 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xiicps_slave.c
+* @addtogroup iicps_v3_0
+* @{
+*
+* Handles slave transfers
+*
+* 
 MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --  -------- ---------------------------------------------
+* 1.00a jz  01/30/10 First release
+* 1.04a kpc 08/30/13 Avoid buffer overwrite in SlaveRecvData function
+* 3.00	sk	01/31/15 Modified the code according to MISRAC 2012 Compliant.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+#include "xiicps.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+extern s32 TransmitFifoFill(XIicPs *InstancePtr);
+
+static s32 SlaveRecvData(XIicPs *InstancePtr);
+
+/************************* Variable Definitions *****************************/
+
+/*****************************************************************************/
+/**
+* This function sets up the device to be a slave.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	SlaveAddr is the address of the slave we are receiving from.
+*
+* @return	None.
+*
+* @note
+*	Interrupt is always enabled no matter the tranfer is interrupt-
+*	driven or polled mode. Whether device will be interrupted or not
+*	depends on whether the device is connected to an interrupt
+*	controller and interrupt for the device is enabled.
+*
+****************************************************************************/
+void XIicPs_SetupSlave(XIicPs *InstancePtr, u16 SlaveAddr)
+{
+	u32 ControlReg;
+	u32 BaseAddr;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(XIICPS_ADDR_MASK >= SlaveAddr);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+
+	ControlReg = XIicPs_In32(BaseAddr + XIICPS_CR_OFFSET);
+
+	/*
+	 * Set up master, AckEn, nea and also clear fifo.
+	 */
+	ControlReg |= (u32)XIICPS_CR_ACKEN_MASK | (u32)XIICPS_CR_CLR_FIFO_MASK;
+	ControlReg |= (u32)XIICPS_CR_NEA_MASK;
+	ControlReg &= (u32)(~XIICPS_CR_MS_MASK);
+
+	XIicPs_WriteReg(BaseAddr, XIICPS_CR_OFFSET,
+			  ControlReg);
+
+	XIicPs_DisableAllInterrupts(BaseAddr);
+
+	XIicPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XIICPS_ADDR_OFFSET, (u32)SlaveAddr);
+
+	return;
+}
+
+/*****************************************************************************/
+/**
+* This function setup a slave interrupt-driven send. It set the repeated
+* start for the device is the tranfer size is larger than FIFO depth.
+* Data processing for the send is initiated by the interrupt handler.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the send buffer.
+* @param	ByteCount is the number of bytes to be sent.
+*
+* @return	None.
+*
+* @note		This send routine is for interrupt-driven transfer only.
+*
+****************************************************************************/
+void XIicPs_SlaveSend(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount)
+{
+	u32 BaseAddr;
+
+	/*
+	 * Assert validates the input arguments
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(MsgPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	InstancePtr->SendBufferPtr = MsgPtr;
+	InstancePtr->SendByteCount = ByteCount;
+	InstancePtr->RecvBufferPtr = NULL;
+
+	XIicPs_EnableInterrupts(BaseAddr,
+			(u32)XIICPS_IXR_DATA_MASK | (u32)XIICPS_IXR_COMP_MASK |
+			(u32)XIICPS_IXR_TO_MASK | (u32)XIICPS_IXR_NACK_MASK |
+			(u32)XIICPS_IXR_TX_OVR_MASK);
+}
+
+/*****************************************************************************/
+/**
+* This function setup a slave interrupt-driven receive.
+* Data processing for the receive is handled by the interrupt handler.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the receive buffer.
+* @param	ByteCount is the number of bytes to be received.
+*
+* @return	None.
+*
+* @note		This routine is for interrupt-driven transfer only.
+*
+****************************************************************************/
+void XIicPs_SlaveRecv(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount)
+{
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(MsgPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+
+	InstancePtr->RecvBufferPtr = MsgPtr;
+	InstancePtr->RecvByteCount = ByteCount;
+	InstancePtr->SendBufferPtr = NULL;
+
+	XIicPs_EnableInterrupts(InstancePtr->Config.BaseAddress,
+		(u32)XIICPS_IXR_DATA_MASK | (u32)XIICPS_IXR_COMP_MASK |
+		(u32)XIICPS_IXR_NACK_MASK | (u32)XIICPS_IXR_TO_MASK |
+		(u32)XIICPS_IXR_RX_OVR_MASK | (u32)XIICPS_IXR_RX_UNF_MASK);
+
+}
+
+/*****************************************************************************/
+/**
+* This function sends  a buffer in polled mode as a slave.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the send buffer.
+* @param	ByteCount is the number of bytes to be sent.
+*
+* @return
+*		- XST_SUCCESS if everything went well.
+*		- XST_FAILURE if master sends us data or master terminates the
+*		transfer before all data has sent out.
+*
+* @note		This send routine is for polled mode transfer only.
+*
+****************************************************************************/
+s32 XIicPs_SlaveSendPolled(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount)
+{
+	u32 IntrStatusReg;
+	u32 StatusReg;
+	u32 BaseAddr;
+	s32 Tmp;
+	s32 BytesToSend;
+	s32 Error = 0;
+	s32 Status = (s32)XST_SUCCESS;
+	u32 Value;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(MsgPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	InstancePtr->SendBufferPtr = MsgPtr;
+	InstancePtr->SendByteCount = ByteCount;
+
+	/*
+	 * Use RXRW bit in status register to wait master to start a read.
+	 */
+	StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+	while (((StatusReg & XIICPS_SR_RXRW_MASK) == 0U) &&
+				((!Error) != 0)) {
+
+		/*
+		 * If master tries to send us data, it is an error.
+		 */
+		if ((StatusReg & XIICPS_SR_RXDV_MASK) != 0x0U) {
+			Error = 1;
+		}
+
+		StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+	}
+
+	if (Error != 0) {
+		Status = (s32)XST_FAILURE;
+	} else {
+
+		/*
+		 * Clear the interrupt status register.
+		 */
+		IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+		XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET, IntrStatusReg);
+
+		/*
+		 * Send data as long as there is more data to send and
+		 * there are no errors.
+		 */
+		Value = (InstancePtr->SendByteCount > (s32)0) &&
+						((!Error) != 0);
+		while (Value != (u32)0x00U) {
+
+			/*
+			 * Find out how many can be sent.
+			 */
+			BytesToSend = InstancePtr->SendByteCount;
+			if (BytesToSend > (s32)(XIICPS_FIFO_DEPTH)) {
+				BytesToSend = (s32)(XIICPS_FIFO_DEPTH);
+			}
+
+			for(Tmp = 0; Tmp < BytesToSend; Tmp ++) {
+				XIicPs_SendByte(InstancePtr);
+			}
+
+			StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+
+			/*
+			 * Wait for master to read the data out of fifo.
+			 */
+			while (((StatusReg & XIICPS_SR_TXDV_MASK) != (u32)0x00U) &&
+							((!Error) != 0)) {
+
+				/*
+				 * If master terminates the transfer before all data is
+				 * sent, it is an error.
+				 */
+				IntrStatusReg = XIicPs_ReadReg(BaseAddr,
+				XIICPS_ISR_OFFSET);
+				if ((IntrStatusReg & XIICPS_IXR_NACK_MASK) != 0x0U) {
+					Error = 1;
+				}
+
+				/* Clear ISR.
+				 */
+				XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET,
+							IntrStatusReg);
+
+				StatusReg = XIicPs_ReadReg(BaseAddr,
+						XIICPS_SR_OFFSET);
+			}
+			Value = (InstancePtr->SendByteCount > (s32)0U) &&
+							((!Error) != 0);
+		}
+	}
+	if (Error != 0) {
+	Status = (s32)XST_FAILURE;
+	}
+
+	return Status;
+}
+/*****************************************************************************/
+/**
+* This function receives a buffer in polled mode as a slave.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+* @param	MsgPtr is the pointer to the receive buffer.
+* @param	ByteCount is the number of bytes to be received.
+*
+* @return
+*		- XST_SUCCESS if everything went well.
+*		- XST_FAILURE if timed out.
+*
+* @note		This receive routine is for polled mode transfer only.
+*
+****************************************************************************/
+s32 XIicPs_SlaveRecvPolled(XIicPs *InstancePtr, u8 *MsgPtr, s32 ByteCount)
+{
+	u32 IntrStatusReg;
+	u32 StatusReg;
+	u32 BaseAddr;
+	s32 Count;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(MsgPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+	InstancePtr->RecvBufferPtr = MsgPtr;
+	InstancePtr->RecvByteCount = ByteCount;
+
+	StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+
+	/*
+	 * Clear the interrupt status register.
+	 */
+	IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+	XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET, IntrStatusReg);
+
+	/*
+	 * Clear the status register.
+	 */
+	StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+	XIicPs_WriteReg(BaseAddr, XIICPS_SR_OFFSET, StatusReg);
+
+	StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+	Count = InstancePtr->RecvByteCount;
+	while (Count > (s32)0) {
+
+		/* Wait for master to put data */
+		while ((StatusReg & XIICPS_SR_RXDV_MASK) == 0U) {
+		    StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+
+			/*
+			 * If master terminates the transfer before we get all
+			 * the data or the master tries to read from us,
+			 * it is an error.
+			 */
+			IntrStatusReg = XIicPs_ReadReg(BaseAddr,
+						XIICPS_ISR_OFFSET);
+			if (((IntrStatusReg & (XIICPS_IXR_DATA_MASK |
+					XIICPS_IXR_COMP_MASK))!=0x0U) &&
+				((StatusReg & XIICPS_SR_RXDV_MASK) == 0U) &&
+				((InstancePtr->RecvByteCount > 0) != 0x0U)) {
+
+				return (s32)XST_FAILURE;
+			}
+
+			/*
+			 * Clear the interrupt status register.
+			 */
+			XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET,
+			IntrStatusReg);
+		}
+
+		/*
+		 * Read all data from FIFO.
+		 */
+		while (((StatusReg & XIICPS_SR_RXDV_MASK)!=0x0U) &&
+			 ((InstancePtr->RecvByteCount > 0) != 0x0U)){
+
+			XIicPs_RecvByte(InstancePtr);
+
+			StatusReg = XIicPs_ReadReg(BaseAddr,
+				XIICPS_SR_OFFSET);
+		}
+		Count = InstancePtr->RecvByteCount;
+	}
+
+	return (s32)XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+* The interrupt handler for slave mode. It does the protocol handling for
+* the interrupt-driven transfers.
+*
+* Completion events and errors are signaled to upper layer for proper
+* handling.
+*
+* 
+*
+* The interrupts that are handled are:
+* - DATA
+*	If the instance is sending, it means that the master wants to read more
+*	data from us. Send more data, and check whether we are done with this
+*	send.
+*
+*	If the instance is receiving, it means that the master has writen
+* 	more data to us. Receive more data, and check whether we are done with
+*	with this receive.
+*
+* - COMP
+*	This marks that stop sequence has been sent from the master, transfer
+*	is about to terminate. However, for receiving, the master may have
+*	written us some data, so receive that first.
+*
+*	It is an error if the amount of transfered data is less than expected.
+*
+* - NAK
+*	This marks that master does not want our data. It is for send only.
+*
+* - Other interrupts
+*	These interrupts are marked as error.
+*
+* 

+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	None.
+*
+* @note 	None.
+*
+****************************************************************************/
+void XIicPs_SlaveInterruptHandler(XIicPs *InstancePtr)
+{
+	u32 IntrStatusReg;
+	u32 IsSend = 0U;
+	u32 StatusEvent = 0U;
+	s32 LeftOver;
+	u32 BaseAddr;
+
+	/*
+	 * Assert validates the input arguments.
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == (u32)XIL_COMPONENT_IS_READY);
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+
+	/*
+	 * Read the Interrupt status register.
+	 */
+	IntrStatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_ISR_OFFSET);
+
+	/*
+	 * Write the status back to clear the interrupts so no events are missed
+	 * while processing this interrupt.
+	 */
+	XIicPs_WriteReg(BaseAddr, XIICPS_ISR_OFFSET, IntrStatusReg);
+
+	/*
+	 * Use the Mask register AND with the Interrupt Status register so
+	 * disabled interrupts are not processed.
+	 */
+	IntrStatusReg &= ~(XIicPs_ReadReg(BaseAddr, XIICPS_IMR_OFFSET));
+
+	/*
+	 * Determine whether the device is sending.
+	 */
+	if (InstancePtr->RecvBufferPtr == NULL) {
+		IsSend = 1U;
+	}
+
+	/* Data interrupt
+	 *
+	 * This means master wants to do more data transfers.
+	 * Also check for completion of transfer, signal upper layer if done.
+	 */
+	if ((u32)0U != (IntrStatusReg & XIICPS_IXR_DATA_MASK)) {
+		if (IsSend != 0x0U) {
+			LeftOver = TransmitFifoFill(InstancePtr);
+				/*
+				 * We may finish send here
+				 */
+				if (LeftOver == 0) {
+					StatusEvent |=
+						XIICPS_EVENT_COMPLETE_SEND;
+				}
+		} else {
+			LeftOver = SlaveRecvData(InstancePtr);
+
+			/* We may finish the receive here */
+			if (LeftOver == 0) {
+				StatusEvent |= XIICPS_EVENT_COMPLETE_RECV;
+			}
+		}
+	}
+
+	/*
+	 * Complete interrupt.
+	 *
+	 * In slave mode, it means the master has done with this transfer, so
+	 * we signal the application using completion event.
+	 */
+	if (0U != (IntrStatusReg & XIICPS_IXR_COMP_MASK)) {
+		if (IsSend != 0x0U) {
+			if (InstancePtr->SendByteCount > 0) {
+				StatusEvent |= XIICPS_EVENT_ERROR;
+			}else {
+				StatusEvent |= XIICPS_EVENT_COMPLETE_SEND;
+			}
+		} else {
+			LeftOver = SlaveRecvData(InstancePtr);
+			if (LeftOver > 0) {
+				StatusEvent |= XIICPS_EVENT_ERROR;
+			} else {
+				StatusEvent |= XIICPS_EVENT_COMPLETE_RECV;
+			}
+		}
+	}
+
+	/*
+	 * Nack interrupt, pass this information to application.
+	 */
+	if (0U != (IntrStatusReg & XIICPS_IXR_NACK_MASK)) {
+		StatusEvent |= XIICPS_EVENT_NACK;
+	}
+
+	/*
+	 * All other interrupts are treated as error.
+	 */
+	if (0U != (IntrStatusReg & (XIICPS_IXR_TO_MASK |
+				XIICPS_IXR_RX_UNF_MASK |
+				XIICPS_IXR_TX_OVR_MASK |
+				XIICPS_IXR_RX_OVR_MASK))){
+
+		StatusEvent |= XIICPS_EVENT_ERROR;
+	}
+
+	/*
+	 * Signal application if there are any events.
+	 */
+	if (0U != StatusEvent) {
+		InstancePtr->StatusHandler(InstancePtr->CallBackRef,
+					   StatusEvent);
+	}
+}
+
+/*****************************************************************************/
+/*
+*
+* This function handles continuation of receiving data. It is invoked
+* from interrupt handler.
+*
+* @param	InstancePtr is a pointer to the XIicPs instance.
+*
+* @return	Number of bytes still expected by the instance.
+*
+* @note		None.
+*
+****************************************************************************/
+static s32 SlaveRecvData(XIicPs *InstancePtr)
+{
+	u32 StatusReg;
+	u32 BaseAddr;
+
+	BaseAddr = InstancePtr->Config.BaseAddress;
+
+	StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+
+	while (((StatusReg & XIICPS_SR_RXDV_MASK)!=0x0U) &&
+			((InstancePtr->RecvByteCount > 0) != 0x0U)) {
+		XIicPs_RecvByte(InstancePtr);
+		StatusReg = XIicPs_ReadReg(BaseAddr, XIICPS_SR_OFFSET);
+	}
+
+	return InstancePtr->RecvByteCount;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/Makefile
new file mode 100644
index 000000000..3e1fc71f7
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xipipsu_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling ipipsu"
+
+xipipsu_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xipipsu_includes
+
+xipipsu_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu.c
new file mode 100644
index 000000000..f8f902330
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu.c
@@ -0,0 +1,352 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xipipsu.c
+* @addtogroup ipipsu_v1_0
+* @{
+*
+* This file contains the implementation of the interface functions for XIpiPsu
+* driver. Refer to the header file xipipsu.h for more detailed information.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver	Who	Date	Changes
+* ----- ------ -------- ----------------------------------------------
+* 1.00	mjr	03/15/15	First Release
+* 2.0	mjr	01/22/16	Fixed response buffer address
+*                               calculation. CR# 932582.
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+#include "xipipsu.h"
+#include "xipipsu_hw.h"
+
+/****************************************************************************/
+/**
+ * Initialize the Instance pointer based on a given Config Pointer
+ *
+ * @param	InstancePtr is a pointer to the instance to be worked on
+ * @param	CfgPtr is the device configuration structure containing required
+ *		  	hardware build data
+ * @param	EffectiveAddress is the base address of the device. If address
+ *        	translation is not utilized, this parameter can be passed in using
+ *        	CfgPtr->Config.BaseAddress to specify the physical base address.
+ * @return	XST_SUCCESS if initialization was successful
+ * 			XST_FAILURE in case of failure
+ *
+ */
+
+XStatus XIpiPsu_CfgInitialize(XIpiPsu *InstancePtr, XIpiPsu_Config * CfgPtr,
+		UINTPTR EffectiveAddress)
+{
+	u32 Index;
+	/* Verify arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(CfgPtr != NULL);
+	/* Set device base address and ID */
+	InstancePtr->Config.DeviceId = CfgPtr->DeviceId;
+	InstancePtr->Config.BaseAddress = EffectiveAddress;
+	InstancePtr->Config.BitMask = CfgPtr->BitMask;
+	InstancePtr->Config.IntId = CfgPtr->IntId;
+
+	InstancePtr->Config.TargetCount = CfgPtr->TargetCount;
+
+	for (Index = 0; Index < CfgPtr->TargetCount; Index++) {
+		InstancePtr->Config.TargetList[Index].Mask =
+				CfgPtr->TargetList[Index].Mask;
+		InstancePtr->Config.TargetList[Index].BufferIndex =
+				CfgPtr->TargetList[Index].BufferIndex;
+	}
+
+	/* Mark the component as Ready */
+	InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+	return (XST_SUCCESS);
+}
+
+/**
+ * @brief	Reset the given IPI register set.
+ *        	This function can be called to disable the IPIs from all
+ *        	the sources and clear any pending IPIs in status register
+ *
+ * @param 	InstancePtr is the pointer to current IPI instance
+ *
+ */
+
+void XIpiPsu_Reset(XIpiPsu *InstancePtr)
+{
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/**************Disable***************/
+
+	XIpiPsu_WriteReg(InstancePtr->Config.BaseAddress, XIPIPSU_IDR_OFFSET,
+			XIPIPSU_ALL_MASK);
+
+	/**************Clear***************/
+	XIpiPsu_WriteReg(InstancePtr->Config.BaseAddress, XIPIPSU_ISR_OFFSET,
+			XIPIPSU_ALL_MASK);
+
+}
+
+/**
+ * @brief	Trigger an IPI to a Destination CPU
+ *
+ * @param	InstancePtr is the pointer to current IPI instance
+ * @param	DestCpuMask is the Mask of the CPU to which IPI is to be triggered
+ *
+ *
+ * @return	XST_SUCCESS if successful
+ * 			XST_FAILURE if an error occurred
+ */
+
+XStatus XIpiPsu_TriggerIpi(XIpiPsu *InstancePtr, u32 DestCpuMask)
+{
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Trigger an IPI to the Target */
+	XIpiPsu_WriteReg(InstancePtr->Config.BaseAddress, XIPIPSU_TRIG_OFFSET,
+			DestCpuMask);
+	return XST_SUCCESS;
+
+}
+
+/**
+ * @brief Poll for an acknowledgement using Observation Register
+ *
+ * @param	InstancePtr is the pointer to current IPI instance
+ * @param	DestCpuMask is the Mask of the destination CPU from which ACK is expected
+ * @param	TimeOutCount is the Count after which the routines returns failure
+ *
+ * @return	XST_SUCCESS if successful
+ * 			XST_FAILURE if a timeout occurred
+ */
+
+XStatus XIpiPsu_PollForAck(XIpiPsu *InstancePtr, u32 DestCpuMask,
+		u32 TimeOutCount)
+{
+	u32 Flag, PollCount;
+	XStatus Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	PollCount = 0;
+	/* Poll the OBS register until the corresponding DestCpu bit is cleared */
+	do {
+		Flag = (XIpiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+				XIPIPSU_OBS_OFFSET)) & (DestCpuMask);
+		PollCount++;
+		/* Check if the IPI was Acknowledged by the Target or we Timed Out*/
+	} while ((0x00000000U != Flag) && (PollCount < TimeOutCount));
+
+	if (PollCount >= TimeOutCount) {
+		Status = XST_FAILURE;
+	} else {
+		Status = XST_SUCCESS;
+	}
+
+	return Status;
+}
+
+/**
+ * @brief	Get the Buffer Index for a CPU specified by Mask
+ *
+ * @param	InstancePtr is the pointer to current IPI instance
+ * @param	CpuMask is the Mask of the CPU form which Index is required
+ *
+ * @return	Buffer Index value if CPU Mask is valid
+ * 			XIPIPSU_MAX_BUFF_INDEX+1 if not valid
+ *
+ * @note	Static function used only by XIpiPsu_GetBufferAddress
+ *
+ */
+static u32 XIpiPsu_GetBufferIndex(XIpiPsu *InstancePtr, u32 CpuMask)
+{
+	u32 BufferIndex;
+	u32 Index;
+	/* Init Index with an invalid value */
+	BufferIndex = XIPIPSU_MAX_BUFF_INDEX + 1;
+
+	/*Search for CPU in the List */
+	for (Index = 0; Index < InstancePtr->Config.TargetCount; Index++) {
+		/*If we find the CPU , then set the Index and break the loop*/
+		if (InstancePtr->Config.TargetList[Index].Mask == CpuMask) {
+			BufferIndex = InstancePtr->Config.TargetList[Index].BufferIndex;
+			break;
+		}
+	}
+
+	/* Return the Index */
+	return BufferIndex;
+}
+
+/**
+ * @brief	Get the Buffer Address for a given pair of CPUs
+ *
+ * @param	InstancePtr is the pointer to current IPI instance
+ * @param	SrcCpuMask is the Mask for Source CPU
+ * @param	DestCpuMask is the Mask for Destination CPU
+ * @param	BufferType is either XIPIPSU_BUF_TYPE_MSG or XIPIPSU_BUF_TYPE_RESP
+ *
+ * @return	Valid Buffer Address if no error
+ * 			NULL if an error occurred in calculating Address
+ *
+ */
+
+static u32* XIpiPsu_GetBufferAddress(XIpiPsu *InstancePtr, u32 SrcCpuMask,
+		u32 DestCpuMask, u32 BufferType)
+{
+#ifdef __aarch64__
+	u64 BufferAddr;
+#else
+	u32 BufferAddr;
+#endif
+
+	u32 SrcIndex;
+	u32 DestIndex;
+	/* Get the buffer indices */
+	SrcIndex = XIpiPsu_GetBufferIndex(InstancePtr, SrcCpuMask);
+	DestIndex = XIpiPsu_GetBufferIndex(InstancePtr, DestCpuMask);
+
+	/* If we got an invalid buffer index, then return NULL pointer, else valid address */
+	if ((SrcIndex > XIPIPSU_MAX_BUFF_INDEX)
+			|| (DestIndex > XIPIPSU_MAX_BUFF_INDEX)) {
+		BufferAddr = 0U;
+	} else {
+
+		if (XIPIPSU_BUF_TYPE_MSG == BufferType) {
+			BufferAddr = XIPIPSU_MSG_RAM_BASE
+					+ (SrcIndex * XIPIPSU_BUFFER_OFFSET_GROUP)
+					+ (DestIndex * XIPIPSU_BUFFER_OFFSET_TARGET);
+		} else if (XIPIPSU_BUF_TYPE_RESP == BufferType) {
+			BufferAddr = XIPIPSU_MSG_RAM_BASE
+					+ (DestIndex * XIPIPSU_BUFFER_OFFSET_GROUP)
+					+ (SrcIndex * XIPIPSU_BUFFER_OFFSET_TARGET)
+					+ (XIPIPSU_BUFFER_OFFSET_RESPONSE);
+		} else {
+			BufferAddr = 0U;
+		}
+
+	}
+
+	return (u32 *) BufferAddr;
+}
+
+/**
+ * @brief	Read an Incoming Message from a Source
+ *
+ * @param 	InstancePtr is the pointer to current IPI instance
+ * @param 	SrcCpuMask is the Device Mask for the CPU which has sent the message
+ * @param 	MsgPtr is the pointer to Buffer to which the read message needs to be stored
+ * @param 	MsgLength is the length of the buffer/message
+ * @param 	BufType is the type of buffer (XIPIPSU_BUF_TYPE_MSG or XIPIPSU_BUF_TYPE_RESP)
+ *
+ * @return	XST_SUCCESS if successful
+ * 			XST_FAILURE if an error occurred
+ */
+
+XStatus XIpiPsu_ReadMessage(XIpiPsu *InstancePtr, u32 TargetMask, u32 *MsgPtr,
+		u32 MsgLength, u8 BufferType)
+{
+	u32 *BufferPtr;
+	u32 Index;
+	u32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(MsgPtr != NULL);
+	Xil_AssertNonvoid(MsgLength <= XIPIPSU_MAX_MSG_LEN);
+
+	BufferPtr = XIpiPsu_GetBufferAddress(InstancePtr, TargetMask,
+			InstancePtr->Config.BitMask, BufferType);
+	if (BufferPtr != NULL) {
+		/* Copy the IPI Buffer contents into Users's Buffer*/
+		for (Index = 0; Index < MsgLength; Index++) {
+			MsgPtr[Index] = BufferPtr[Index];
+		}
+		Status = XST_SUCCESS;
+	} else {
+		Status = XST_FAILURE;
+	}
+
+	return Status;
+}
+
+
+/**
+ * @brief	Send a Message to Destination
+ *
+ * @param	InstancePtr is the pointer to current IPI instance
+ * @param	DestCpuMask is the Device Mask for the destination CPU
+ * @param	MsgPtr is the pointer to Buffer which contains the message to be sent
+ * @param	MsgLength is the length of the buffer/message
+ * @param	BufType is the type of buffer (XIPIPSU_BUF_TYPE_MSG or XIPIPSU_BUF_TYPE_RESP)
+ *
+ * @return	XST_SUCCESS if successful
+ * 			XST_FAILURE if an error occurred
+ */
+
+XStatus XIpiPsu_WriteMessage(XIpiPsu *InstancePtr, u32 TargetMask, u32 *MsgPtr,
+		u32 MsgLength, u8 BufferType)
+{
+	u32 *BufferPtr;
+	u32 Index;
+	u32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(MsgPtr != NULL);
+	Xil_AssertNonvoid(MsgLength <= XIPIPSU_MAX_MSG_LEN);
+
+	BufferPtr = XIpiPsu_GetBufferAddress(InstancePtr,
+			InstancePtr->Config.BitMask, TargetMask, BufferType);
+	if (BufferPtr != NULL) {
+		/* Copy the Message to IPI Buffer */
+		for (Index = 0; Index < MsgLength; Index++) {
+			BufferPtr[Index] = MsgPtr[Index];
+		}
+		Status = XST_SUCCESS;
+	} else {
+		Status = XST_FAILURE;
+	}
+
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu.h
new file mode 100644
index 000000000..7eb8e5469
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu.h
@@ -0,0 +1,281 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+ * @file xipipsu.h
+* @addtogroup ipipsu_v1_0
+* @{
+* @details
+ *
+ * This is the header file for implementation of IPIPSU driver.
+ * Inter Processor Interrupt (IPI) is used for communication between
+ * different processors on ZynqMP SoC. Each IPI register set has Trigger, Status
+ * and Observation registers for communication between processors. Each IPI path
+ * has a 32 byte buffer associated with it and these buffers are located in the
+ * XPPU RAM. This driver supports the following operations:
+ *
+ * - Trigger IPIs to CPUs on the SoC
+ * - Write and Read Message buffers
+ * - Read the status of Observation Register to get status of Triggered IPI
+ * - Enable/Disable IPIs from selected Masters
+ * - Read the Status register to get the source of an incoming IPI
+ *
+ * Initialization
+ * The config data for the driver is loaded and is based on the HW build. The
+ * XIpiPsu_Config data structure contains all the data related to the
+ * IPI driver instance and also teh available Target CPUs.
+ *
+ * Sending an IPI
+ * The following steps can be followed to send an IPI:
+ * - Write the Message into Message Buffer using XIpiPsu_WriteMessage()
+ * - Trigger IPI using XIpiPsu_TriggerIpi()
+ * - Wait for Ack using XIpiPsu_PollForAck()
+ * - Read response using XIpiPsu_ReadMessage()
+ *
+ * @note	XIpiPsu_GetObsStatus() before sending an IPI to ensure that the
+ * previous IPI was serviced by the target
+ *
+ * Receiving an IPI
+ * To receive an IPI, the following sequence can be followed:
+ * - Register an interrupt handler for the IPIs interrupt ID
+ * - Enable the required sources using XIpiPsu_InterruptEnable()
+ * - In the interrupt handler, Check for source using XIpiPsu_GetInterruptStatus
+ * - Read the message form source using XIpiPsu_ReadMessage()
+ * - Write the response using XIpiPsu_WriteMessage()
+ * - Ack the IPI using XIpiPsu_ClearInterruptStatus()
+ *
+ * @note	XIpiPsu_Reset can be used at startup to clear the status and
+ * disable all sources
+ *
+ */
+/*****************************************************************************/
+#ifndef XIPIPSU_H_
+#define XIPIPSU_H_
+
+
+/***************************** Include Files *********************************/
+#include "xil_io.h"
+#include "xstatus.h"
+#include "xipipsu_hw.h"
+
+/************************** Constant Definitions *****************************/
+#define XIPIPSU_BUF_TYPE_MSG	(0x00000001U)
+#define XIPIPSU_BUF_TYPE_RESP	(0x00000002U)
+#define XIPIPSU_MAX_MSG_LEN		XIPIPSU_MSG_BUF_SIZE
+/**************************** Type Definitions *******************************/
+/**
+ * Data structure used to refer IPI Targets
+ */
+typedef struct {
+	u32 Mask; /**< Bit Mask for the target */
+	u32 BufferIndex; /**< Buffer Index used for calculating buffer address */
+} XIpiPsu_Target;
+
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct {
+	u32 DeviceId; /**< Unique ID  of device */
+	u32 BaseAddress; /**< Base address of the device */
+	u32 BitMask; /**< BitMask to be used to identify this CPU */
+	u32 BufferIndex; /**< Index of the IPI Message Buffer */
+	u32 IntId; /**< Interrupt ID on GIC **/
+	u32 TargetCount; /**< Number of available IPI Targets */
+	XIpiPsu_Target TargetList[XIPIPSU_MAX_TARGETS] ; /** < List of IPI Targets */
+} XIpiPsu_Config;
+
+/**
+ * The XIpiPsu driver instance data. The user is required to allocate a
+ * variable of this type for each IPI device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+	XIpiPsu_Config Config; /**< Configuration structure */
+	u32 IsReady; /**< Device is initialized and ready */
+	u32 Options; /**< Options set in the device */
+} XIpiPsu;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+/**
+*
+* Read the register specified by the base address and offset
+*
+* @param	BaseAddress is the base address of the IPI instance
+* @param	RegOffset is the offset of the register relative to base
+*
+* @return	Value of the specified register
+* @note
+* C-style signature
+*	u32 XIpiPsu_ReadReg(u32 BaseAddress, u32 RegOffset)
+*
+*****************************************************************************/
+
+#define XIpiPsu_ReadReg(BaseAddress, RegOffset) \
+		Xil_In32((BaseAddress) + (RegOffset))
+
+/****************************************************************************/
+/**
+*
+* Write a value into a register specified by base address and offset
+*
+* @param BaseAddress is the base address of the IPI instance
+* @param RegOffset is the offset of the register relative to base
+* @param Data is a 32-bit value that is to be written into the specified register
+*
+* @note
+* C-style signature
+*	void XIpiPsu_WriteReg(u32 BaseAddress, u32 RegOffset, u32 Data)
+*
+*****************************************************************************/
+
+#define XIpiPsu_WriteReg(BaseAddress, RegOffset, Data) \
+		Xil_Out32(((BaseAddress) + (RegOffset)), (Data))
+
+/****************************************************************************/
+/**
+*
+* Enable interrupts specified in Mask. The corresponding interrupt for
+* each bit set to 1 in Mask, will be enabled.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Mask contains a bit mask of interrupts to enable. The mask can
+*			be formed using a set of bitwise or'd values of individual CPU masks
+*
+* @note
+* C-style signature
+*	void XIpiPsu_InterruptEnable(XIpiPsu *InstancePtr, u32 Mask)
+*
+*****************************************************************************/
+#define XIpiPsu_InterruptEnable(InstancePtr, Mask) \
+	XIpiPsu_WriteReg((InstancePtr)->Config.BaseAddress, \
+		XIPIPSU_IER_OFFSET, \
+		((Mask) & XIPIPSU_ALL_MASK));
+
+/****************************************************************************/
+/**
+*
+* Disable interrupts specified in Mask. The corresponding interrupt for
+* each bit set to 1 in Mask, will be disabled.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Mask contains a bit mask of interrupts to disable. The mask can
+*			be formed using a set of bitwise or'd values of individual CPU masks
+*
+* @note
+* C-style signature
+*	void XIpiPsu_InterruptDisable(XIpiPsu *InstancePtr, u32 Mask)
+*
+*****************************************************************************/
+#define XIpiPsu_InterruptDisable(InstancePtr, Mask)  \
+	XIpiPsu_WriteReg((InstancePtr)->Config.BaseAddress, \
+		XIPIPSU_IDR_OFFSET, \
+		((Mask) & XIPIPSU_ALL_MASK));
+/****************************************************************************/
+/**
+*
+* Get the STATUS REGISTER of the current IPI instance.
+*
+* @param InstancePtr is a pointer to the instance to be worked on.
+* @return Returns the Interrupt Status register(ISR) contents
+* @note User needs to parse this 32-bit value to check the source CPU
+* C-style signature
+*	u32 XIpiPsu_GetInterruptStatus(XIpiPsu *InstancePtr)
+*
+*****************************************************************************/
+#define XIpiPsu_GetInterruptStatus(InstancePtr)  \
+	XIpiPsu_ReadReg((InstancePtr)->Config.BaseAddress, \
+		XIPIPSU_ISR_OFFSET)
+/****************************************************************************/
+/**
+*
+* Clear the STATUS REGISTER of the current IPI instance.
+* The corresponding interrupt status for
+* each bit set to 1 in Mask, will be cleared
+*
+* @param InstancePtr is a pointer to the instance to be worked on.
+* @param Mask corresponding to the source CPU*
+*
+* @note This function should be used after handling the IPI.
+* Clearing the status will automatically clear the corresponding bit in
+* OBSERVATION register of Source CPU
+* C-style signature
+*	void XIpiPsu_ClearInterruptStatus(XIpiPsu *InstancePtr, u32 Mask)
+*
+*****************************************************************************/
+
+#define XIpiPsu_ClearInterruptStatus(InstancePtr, Mask)  \
+	XIpiPsu_WriteReg((InstancePtr)->Config.BaseAddress, \
+		XIPIPSU_ISR_OFFSET, \
+		((Mask) & XIPIPSU_ALL_MASK));
+/****************************************************************************/
+/**
+*
+* Get the OBSERVATION REGISTER of the current IPI instance.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @return	Returns the Observation register(OBS) contents
+* @note		User needs to parse this 32-bit value to check the status of
+*			individual CPUs
+* C-style signature
+*	u32 XIpiPsu_GetObsStatus(XIpiPsu *InstancePtr)
+*
+*****************************************************************************/
+#define XIpiPsu_GetObsStatus(InstancePtr)  \
+	XIpiPsu_ReadReg((InstancePtr)->Config.BaseAddress, \
+		XIPIPSU_OBS_OFFSET)
+/****************************************************************************/
+/************************** Function Prototypes *****************************/
+
+/* Static lookup function implemented in xipipsu_sinit.c */
+
+XIpiPsu_Config *XIpiPsu_LookupConfig(u32 DeviceId);
+
+/* Interface Functions implemented in xipipsu.c */
+
+XStatus XIpiPsu_CfgInitialize(XIpiPsu *InstancePtr, XIpiPsu_Config * CfgPtr,
+		UINTPTR EffectiveAddress);
+
+void XIpiPsu_Reset(XIpiPsu *InstancePtr);
+
+XStatus XIpiPsu_TriggerIpi(XIpiPsu *InstancePtr, u32 DestCpuMask);
+
+XStatus XIpiPsu_PollForAck(XIpiPsu *InstancePtr, u32 DestCpuMask,
+		u32 TimeOutCount);
+
+XStatus XIpiPsu_ReadMessage(XIpiPsu *InstancePtr, u32 SrcCpuMask, u32 *MsgPtr,
+		u32 MsgLength, u8 BufType);
+
+XStatus XIpiPsu_WriteMessage(XIpiPsu *InstancePtr, u32 DestCpuMask, u32 *MsgPtr,
+		u32 MsgLength, u8 BufType);
+
+#endif /* XIPIPSU_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_g.c
new file mode 100644
index 000000000..f5728c502
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_g.c
@@ -0,0 +1,161 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xipipsu.h"
+
+/*
+* The configuration table for devices
+*/
+
+XIpiPsu_Config XIpiPsu_ConfigTable[] =
+{
+
+	{
+		XPAR_PSU_IPI_1_DEVICE_ID,
+		XPAR_PSU_IPI_1_BASE_ADDRESS,
+		XPAR_PSU_IPI_1_BIT_MASK,
+		XPAR_PSU_IPI_1_BUFFER_INDEX,
+		XPAR_PSU_IPI_1_INT_ID,
+		XPAR_XIPIPSU_NUM_TARGETS,
+		{
+
+			{
+				XPAR_PSU_IPI_0_BIT_MASK,
+				XPAR_PSU_IPI_0_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_1_BIT_MASK,
+				XPAR_PSU_IPI_1_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_2_BIT_MASK,
+				XPAR_PSU_IPI_2_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_3_BIT_MASK,
+				XPAR_PSU_IPI_3_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_4_BIT_MASK,
+				XPAR_PSU_IPI_4_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_5_BIT_MASK,
+				XPAR_PSU_IPI_5_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_6_BIT_MASK,
+				XPAR_PSU_IPI_6_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_7_BIT_MASK,
+				XPAR_PSU_IPI_7_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_8_BIT_MASK,
+				XPAR_PSU_IPI_8_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_9_BIT_MASK,
+				XPAR_PSU_IPI_9_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_10_BIT_MASK,
+				XPAR_PSU_IPI_10_BUFFER_INDEX
+			}
+		}
+	},
+
+	{
+		XPAR_PSU_IPI_2_DEVICE_ID,
+		XPAR_PSU_IPI_2_BASE_ADDRESS,
+		XPAR_PSU_IPI_2_BIT_MASK,
+		XPAR_PSU_IPI_2_BUFFER_INDEX,
+		XPAR_PSU_IPI_2_INT_ID,
+		XPAR_XIPIPSU_NUM_TARGETS,
+		{
+
+			{
+				XPAR_PSU_IPI_0_BIT_MASK,
+				XPAR_PSU_IPI_0_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_1_BIT_MASK,
+				XPAR_PSU_IPI_1_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_2_BIT_MASK,
+				XPAR_PSU_IPI_2_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_3_BIT_MASK,
+				XPAR_PSU_IPI_3_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_4_BIT_MASK,
+				XPAR_PSU_IPI_4_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_5_BIT_MASK,
+				XPAR_PSU_IPI_5_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_6_BIT_MASK,
+				XPAR_PSU_IPI_6_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_7_BIT_MASK,
+				XPAR_PSU_IPI_7_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_8_BIT_MASK,
+				XPAR_PSU_IPI_8_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_9_BIT_MASK,
+				XPAR_PSU_IPI_9_BUFFER_INDEX
+			},
+			{
+				XPAR_PSU_IPI_10_BIT_MASK,
+				XPAR_PSU_IPI_10_BUFFER_INDEX
+			}
+		}
+	}
+};
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_hw.h
new file mode 100644
index 000000000..d24a8ea0a
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_hw.h
@@ -0,0 +1,79 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/**
+*
+* @file xipipsu_hw.h
+* @addtogroup ipipsu_v1_0
+* @{
+*
+* This file contains macro definitions for low level HW related params
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --- -------- -----------------------------------------------.
+* 1.0   mjr  03/15/15 First release
+*
+* 

+*
+******************************************************************************/
+#ifndef XIPIPSU_HW_H_	/* prevent circular inclusions */
+#define XIPIPSU_HW_H_	/* by using protection macros */
+
+/************************** Constant Definitions *****************************/
+/* Message RAM related params */
+#define XIPIPSU_MSG_RAM_BASE 0xFF990000U
+#define XIPIPSU_MSG_BUF_SIZE 8U	/* Size in Words */
+#define XIPIPSU_MAX_BUFF_INDEX	7
+
+/* EIGHT pairs of TWO buffers(msg+resp) of THIRTY TWO bytes each */
+#define XIPIPSU_BUFFER_OFFSET_GROUP	(8U * 2U * 32U)
+#define XIPIPSU_BUFFER_OFFSET_TARGET (32U * 2U)
+#define XIPIPSU_BUFFER_OFFSET_RESPONSE		(32U)
+
+/* Max Number of IPI slots on the device */
+#define XIPIPSU_MAX_TARGETS	11
+
+/* Register Offsets for each member  of IPI Register Set */
+#define XIPIPSU_TRIG_OFFSET 0x00U
+#define XIPIPSU_OBS_OFFSET 0x04U
+#define XIPIPSU_ISR_OFFSET 0x10U
+#define XIPIPSU_IMR_OFFSET 0x14U
+#define XIPIPSU_IER_OFFSET 0x18U
+#define XIPIPSU_IDR_OFFSET 0x1CU
+
+/* MASK of all valid IPI bits in above registers */
+#define XIPIPSU_ALL_MASK	0x0F0F0301U
+
+#endif /* XIPIPSU_HW_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_sinit.c
new file mode 100644
index 000000000..26495c8dd
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_0/src/xipipsu_sinit.c
@@ -0,0 +1,90 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/**
+*
+* @file xipipsu_sinit.c
+* @addtogroup ipipsu_v1_0
+* @{
+*
+* The implementation of the XIpiPsu component's static initialization
+* functionality.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --- -------- -----------------------------------------------
+* 1.0   mjr  03/15/15 First release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+#include "xil_types.h"
+#include "xparameters.h"
+#include "xipipsu.h"
+
+/************************** Variable Definitions *****************************/
+extern XIpiPsu_Config XIpiPsu_ConfigTable[];
+
+/*****************************************************************************/
+
+/**
+*
+* Looks up the device configuration based on the unique device ID. A table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId contains the ID of the device to look up the
+*			configuration for.
+*
+* @return	A pointer to the configuration found or NULL if the specified
+*			device ID was not found. See xipipsu.h for the definition of
+*			XIpiPsu_Config.
+*
+* @note		None.
+*
+******************************************************************************/
+XIpiPsu_Config *XIpiPsu_LookupConfig(u32 DeviceId)
+{
+	XIpiPsu_Config *CfgPtr = NULL;
+	int Index;
+
+	for (Index = 0; Index < XPAR_XIPIPSU_NUM_INSTANCES; Index++) {
+		if (XIpiPsu_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XIpiPsu_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/Makefile
new file mode 100644
index 000000000..88a66dd93
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xqspipsu_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling qspipsu"
+
+xqspipsu_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xqspipsu_includes
+
+xqspipsu_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu.c
new file mode 100644
index 000000000..cd415ae07
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu.c
@@ -0,0 +1,1290 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xqspipsu.c
+* @addtogroup qspipsu_v1_0
+* @{
+*
+* This file implements the functions required to use the QSPIPSU hardware to
+* perform a transfer. These are accessible to the user via xqspipsu.h.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --- -------- -----------------------------------------------
+* 1.0   hk  08/21/14 First release
+*       sk  03/13/15 Added IO mode support.
+*       hk  03/18/15 Switch to I/O mode before clearing RX FIFO.
+*                    Clear and disbale DMA interrupts/status in abort.
+*                    Use DMA DONE bit instead of BUSY as recommended.
+*       sk  04/24/15 Modified the code according to MISRAC-2012.
+*       sk  06/17/15 Removed NULL checks for Rx/Tx buffers. As
+*                    writing/reading from 0x0 location is permitted.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xqspipsu.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+static void StubStatusHandler(void *CallBackRef, u32 StatusEvent,
+			u32 ByteCount);
+static inline u32 XQspiPsu_SelectSpiMode(u8 SpiMode);
+static inline void XQspiPsu_TXRXSetup(XQspiPsu *InstancePtr, XQspiPsu_Msg *Msg,
+			u32 *GenFifoEntry);
+static inline void XQspiPsu_FillTxFifo(XQspiPsu *InstancePtr,
+			XQspiPsu_Msg *Msg, s32 Size);
+static inline void XQspiPsu_SetupRxDma(XQspiPsu *InstancePtr,
+			XQspiPsu_Msg *Msg);
+static inline void XQspiPsu_GenFifoEntryCSAssert(XQspiPsu *InstancePtr);
+static inline void XQspiPsu_GenFifoEntryData(XQspiPsu *InstancePtr,
+			XQspiPsu_Msg *Msg, s32 Index);
+static inline void XQspiPsu_GenFifoEntryCSDeAssert(XQspiPsu *InstancePtr);
+static inline void XQspiPsu_ReadRxFifo(XQspiPsu *InstancePtr,
+			XQspiPsu_Msg *Msg, s32 Size);
+
+/************************** Variable Definitions *****************************/
+
+/*****************************************************************************/
+/**
+*
+* Initializes a specific XQspiPsu instance such that the driver is ready to use.
+*
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	ConfigPtr is a reference to a structure containing information
+*		about a specific QSPIPSU device. This function initializes an
+*		InstancePtr object for a specific device specified by the
+*		contents of Config.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. The caller is responsible for keeping the address
+*		mapping from EffectiveAddr to the device physical base address
+*		unchanged once this function is invoked. Unexpected errors may
+*		occur if the address mapping changes after this function is
+*		called. If address translation is not used, use
+*		ConfigPtr->Config.BaseAddress for this device.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_DEVICE_IS_STARTED if the device is already started.
+*		It must be stopped to re-initialize.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XQspiPsu_CfgInitialize(XQspiPsu *InstancePtr, XQspiPsu_Config *ConfigPtr,
+				u32 EffectiveAddr)
+{
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+	s32 Status;
+
+	/*
+	 * If the device is busy, disallow the initialize and return a status
+	 * indicating it is already started. This allows the user to stop the
+	 * device and re-initialize, but prevents a user from inadvertently
+	 * initializing. This assumes the busy flag is cleared at startup.
+	 */
+	if (InstancePtr->IsBusy == TRUE) {
+		Status = (s32)XST_DEVICE_IS_STARTED;
+	} else {
+
+		/* Set some default values. */
+		InstancePtr->IsBusy = FALSE;
+
+		InstancePtr->Config.BaseAddress = EffectiveAddr + XQSPIPSU_OFFSET;
+		InstancePtr->Config.ConnectionMode = ConfigPtr->ConnectionMode;
+		InstancePtr->StatusHandler = StubStatusHandler;
+		InstancePtr->Config.BusWidth = ConfigPtr->BusWidth;
+
+		/* Other instance variable initializations */
+		InstancePtr->SendBufferPtr = NULL;
+		InstancePtr->RecvBufferPtr = NULL;
+		InstancePtr->GenFifoBufferPtr = NULL;
+		InstancePtr->TxBytes = 0;
+		InstancePtr->RxBytes = 0;
+		InstancePtr->GenFifoEntries = 0;
+		InstancePtr->ReadMode = XQSPIPSU_READMODE_DMA;
+		InstancePtr->GenFifoCS = XQSPIPSU_GENFIFO_CS_LOWER;
+		InstancePtr->GenFifoBus = XQSPIPSU_GENFIFO_BUS_LOWER;
+		InstancePtr->IsUnaligned = 0;
+		InstancePtr->IsManualstart = TRUE;
+
+		/* Select QSPIPSU */
+		XQspiPsu_Select(InstancePtr);
+
+		/*
+		 * Reset the QSPIPSU device to get it into its initial state. It is
+		 * expected that device configuration will take place after this
+		 * initialization is done, but before the device is started.
+		 */
+		XQspiPsu_Reset(InstancePtr);
+
+		InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+
+		Status = XST_SUCCESS;
+	}
+
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* Resets the QSPIPSU device. Reset must only be called after the driver has
+* been initialized. Any data transfer that is in progress is aborted.
+*
+* The upper layer software is responsible for re-configuring (if necessary)
+* and restarting the QSPIPSU device after the reset.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XQspiPsu_Reset(XQspiPsu *InstancePtr)
+{
+	u32 ConfigReg;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	/* Abort any transfer that is in progress */
+	XQspiPsu_Abort(InstancePtr);
+
+	/* Default value to config register */
+	ConfigReg = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_CFG_OFFSET);
+
+	/* DMA mode */
+	ConfigReg &= ~XQSPIPSU_CFG_MODE_EN_MASK;
+	ConfigReg |= XQSPIPSU_CFG_MODE_EN_DMA_MASK;
+	/* Manual start */
+	ConfigReg |= XQSPIPSU_CFG_GEN_FIFO_START_MODE_MASK;
+	/* Little endain by default */
+	ConfigReg &= ~XQSPIPSU_CFG_ENDIAN_MASK;
+	/* Disable poll timeout */
+	ConfigReg &= ~XQSPIPSU_CFG_EN_POLL_TO_MASK;
+	/* Set hold bit */
+	ConfigReg |= XQSPIPSU_CFG_WP_HOLD_MASK;
+	/* Clear prescalar by default */
+	ConfigReg &= (u32)(~XQSPIPSU_CFG_BAUD_RATE_DIV_MASK);
+	/* CPOL CPHA 00 */
+	ConfigReg &= (u32)(~XQSPIPSU_CFG_CLK_PHA_MASK);
+	ConfigReg &= (u32)(~XQSPIPSU_CFG_CLK_POL_MASK);
+
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_CFG_OFFSET, ConfigReg);
+
+	/* Set by default to allow for high frequencies */
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_LPBK_DLY_ADJ_OFFSET,
+		XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_LPBK_DLY_ADJ_OFFSET) |
+			XQSPIPSU_LPBK_DLY_ADJ_USE_LPBK_MASK);
+
+	/* Reset thresholds */
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_TX_THRESHOLD_OFFSET,
+		XQSPIPSU_TX_FIFO_THRESHOLD_RESET_VAL);
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_RX_THRESHOLD_OFFSET,
+		XQSPIPSU_RX_FIFO_THRESHOLD_RESET_VAL);
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_GF_THRESHOLD_OFFSET,
+		XQSPIPSU_GEN_FIFO_THRESHOLD_RESET_VAL);
+
+	/* DMA init */
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_QSPIDMA_DST_CTRL_OFFSET,
+			XQSPIPSU_QSPIDMA_DST_CTRL_RESET_VAL);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* Aborts a transfer in progress by
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+*
+* @return	None.
+*
+* @note
+*
+******************************************************************************/
+void XQspiPsu_Abort(XQspiPsu *InstancePtr)
+{
+
+	u32 IntrStatus, ConfigReg;
+
+	IntrStatus = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+					XQSPIPSU_ISR_OFFSET);
+
+	/* Clear and disable interrupts */
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_ISR_OFFSET, IntrStatus | XQSPIPSU_ISR_WR_TO_CLR_MASK);
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_QSPIDMA_DST_I_STS_OFFSET,
+		XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+				XQSPIPSU_QSPIDMA_DST_I_STS_OFFSET));
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_QSPIDMA_DST_STS_OFFSET,
+			XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+				XQSPIPSU_QSPIDMA_DST_STS_OFFSET) |
+				XQSPIPSU_QSPIDMA_DST_STS_WTC);
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_IDR_OFFSET, XQSPIPSU_IDR_ALL_MASK);
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_QSPIDMA_DST_I_DIS_OFFSET,
+			XQSPIPSU_QSPIDMA_DST_INTR_ALL_MASK);
+
+	/* Clear FIFO */
+	if((XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_ISR_OFFSET) & XQSPIPSU_ISR_RXEMPTY_MASK) != FALSE) {
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_FIFO_CTRL_OFFSET,
+			XQSPIPSU_FIFO_CTRL_RST_TX_FIFO_MASK |
+			XQSPIPSU_FIFO_CTRL_RST_GEN_FIFO_MASK);
+	}
+
+	/*
+	 * Switch to IO mode to Clear RX FIFO. This is becuase of DMA behaviour
+	 * where it waits on RX empty and goes busy assuming there is data
+	 * to be transfered even if there is no request.
+	 */
+	if ((IntrStatus & XQSPIPSU_ISR_RXEMPTY_MASK) != 0U) {
+		ConfigReg = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+					XQSPIPSU_CFG_OFFSET);
+		ConfigReg &= ~XQSPIPSU_CFG_MODE_EN_MASK;
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+				XQSPIPSU_CFG_OFFSET, ConfigReg);
+
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+				XQSPIPSU_FIFO_CTRL_OFFSET,
+				XQSPIPSU_FIFO_CTRL_RST_RX_FIFO_MASK);
+
+		if (InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) {
+			ConfigReg |= XQSPIPSU_CFG_MODE_EN_DMA_MASK;
+			XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+					XQSPIPSU_CFG_OFFSET, ConfigReg);
+		}
+	}
+
+	/* Disable QSPIPSU */
+	XQspiPsu_Disable(InstancePtr);
+
+	InstancePtr->TxBytes = 0;
+	InstancePtr->RxBytes = 0;
+	InstancePtr->GenFifoEntries = 0;
+	InstancePtr->IsBusy = FALSE;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function performs a transfer on the bus in polled mode. The messages
+* passed are all transferred on the bus between one CS assert and de-assert.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Msg is a pointer to the structure containing transfer data.
+* @param	NumMsg is the number of messages to be transferred.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if transfer fails.
+*		- XST_DEVICE_BUSY if a transfer is already in progress.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XQspiPsu_PolledTransfer(XQspiPsu *InstancePtr, XQspiPsu_Msg *Msg,
+				u32 NumMsg)
+{
+	u32 StatusReg;
+	u32 ConfigReg;
+	s32 Index;
+	u32 QspiPsuStatusReg, DmaStatusReg;
+	u32 BaseAddress;
+	s32 Status;
+	s32 RxThr;
+	u32 IOPending = (u32)FALSE;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	for (Index = 0; Index < (s32)NumMsg; Index++) {
+		Xil_AssertNonvoid(Msg[Index].ByteCount > 0U);
+	}
+
+	/* Check whether there is another transfer in progress. Not thread-safe */
+	if (InstancePtr->IsBusy == TRUE) {
+		return (s32)XST_DEVICE_BUSY;
+	}
+
+	/* Check for ByteCount upper limit - 2^28 for DMA */
+	for (Index = 0; Index < (s32)NumMsg; Index++) {
+		if ((Msg[Index].ByteCount > XQSPIPSU_DMA_BYTES_MAX) &&
+				((Msg[Index].Flags & XQSPIPSU_MSG_FLAG_RX) != FALSE)) {
+			return (s32)XST_FAILURE;
+		}
+	}
+
+	/*
+	 * Set the busy flag, which will be cleared when the transfer is
+	 * entirely done.
+	 */
+	InstancePtr->IsBusy = TRUE;
+
+	BaseAddress = InstancePtr->Config.BaseAddress;
+
+	/* Enable */
+	XQspiPsu_Enable(InstancePtr);
+
+	/* Select slave */
+	XQspiPsu_GenFifoEntryCSAssert(InstancePtr);
+
+	/* list */
+	Index = 0;
+	while (Index < (s32)NumMsg) {
+		XQspiPsu_GenFifoEntryData(InstancePtr, Msg, Index);
+
+		if (InstancePtr->IsManualstart == TRUE) {
+			XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_CFG_OFFSET,
+				XQspiPsu_ReadReg(BaseAddress,
+					XQSPIPSU_CFG_OFFSET) |
+					XQSPIPSU_CFG_START_GEN_FIFO_MASK);
+		}
+
+		/* Use thresholds here */
+		/* If there is more data to be transmitted */
+		do {
+			QspiPsuStatusReg = XQspiPsu_ReadReg(BaseAddress,
+						XQSPIPSU_ISR_OFFSET);
+
+			/* Transmit more data if left */
+			if (((QspiPsuStatusReg & XQSPIPSU_ISR_TXNOT_FULL_MASK) != FALSE) &&
+				((Msg[Index].Flags & XQSPIPSU_MSG_FLAG_TX) != FALSE) &&
+				(InstancePtr->TxBytes > 0)) {
+				XQspiPsu_FillTxFifo(InstancePtr, &Msg[Index],
+						XQSPIPSU_TXD_DEPTH);
+			}
+
+			/* Check if DMA RX is complete and update RxBytes */
+			if ((InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) &&
+				((Msg[Index].Flags & XQSPIPSU_MSG_FLAG_RX) != FALSE)) {
+				u32 DmaIntrSts;
+				DmaIntrSts = XQspiPsu_ReadReg(BaseAddress,
+								XQSPIPSU_QSPIDMA_DST_I_STS_OFFSET);
+				if ((DmaIntrSts & XQSPIPSU_QSPIDMA_DST_I_STS_DONE_MASK) != FALSE) {
+					XQspiPsu_WriteReg(BaseAddress,
+						XQSPIPSU_QSPIDMA_DST_I_STS_OFFSET,
+						DmaIntrSts);
+					/* Read remaining bytes using IO mode */
+					if((InstancePtr->RxBytes % 4) != 0 ) {
+						XQspiPsu_WriteReg(BaseAddress,
+							XQSPIPSU_CFG_OFFSET,
+							(XQspiPsu_ReadReg(BaseAddress,
+							XQSPIPSU_CFG_OFFSET) &
+							~XQSPIPSU_CFG_MODE_EN_MASK));
+						InstancePtr->ReadMode = XQSPIPSU_READMODE_IO;
+						Msg[Index].ByteCount =
+							(InstancePtr->RxBytes % 4);
+						Msg[Index].RxBfrPtr += (InstancePtr->RxBytes -
+								(InstancePtr->RxBytes % 4));
+						InstancePtr->IsUnaligned = 1;
+						IOPending = (u32)TRUE;
+						break;
+					}
+					InstancePtr->RxBytes = 0;
+				}
+			} else {
+				if ((Msg[Index].Flags & XQSPIPSU_MSG_FLAG_RX) != FALSE) {
+					/* Check if PIO RX is complete and update RxBytes */
+					RxThr = (s32)XQspiPsu_ReadReg(BaseAddress,
+							XQSPIPSU_RX_THRESHOLD_OFFSET);
+					if ((QspiPsuStatusReg & XQSPIPSU_ISR_RXNEMPTY_MASK)
+									!= 0U) {
+						XQspiPsu_ReadRxFifo(InstancePtr,
+								&Msg[Index], RxThr*4);
+
+					} else {
+						if ((QspiPsuStatusReg &
+							XQSPIPSU_ISR_GENFIFOEMPTY_MASK) != 0U) {
+								XQspiPsu_ReadRxFifo(InstancePtr,
+									&Msg[Index], InstancePtr->RxBytes);
+						}
+					}
+				}
+			}
+		} while (((QspiPsuStatusReg & XQSPIPSU_ISR_GENFIFOEMPTY_MASK) == FALSE) ||
+			(InstancePtr->TxBytes != 0) ||
+			((QspiPsuStatusReg & XQSPIPSU_ISR_TXEMPTY_MASK) == FALSE) ||
+			(InstancePtr->RxBytes != 0));
+
+		if((InstancePtr->IsUnaligned != 0) && (IOPending == (u32)FALSE)) {
+			InstancePtr->IsUnaligned = 0;
+			XQspiPsu_WriteReg(BaseAddress,
+				XQSPIPSU_CFG_OFFSET, (XQspiPsu_ReadReg(
+				BaseAddress,
+				XQSPIPSU_CFG_OFFSET) |
+				XQSPIPSU_CFG_MODE_EN_DMA_MASK));
+			InstancePtr->ReadMode = XQSPIPSU_READMODE_DMA;
+		}
+
+		if (IOPending == (u32)TRUE) {
+			IOPending = (u32)FALSE;
+		} else {
+			Index++;
+		}
+	}
+
+	/* De-select slave */
+	XQspiPsu_GenFifoEntryCSDeAssert(InstancePtr);
+
+	if (InstancePtr->IsManualstart == TRUE) {
+		XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_CFG_OFFSET,
+			XQspiPsu_ReadReg(BaseAddress, XQSPIPSU_CFG_OFFSET) |
+				XQSPIPSU_CFG_START_GEN_FIFO_MASK);
+	}
+
+	QspiPsuStatusReg = XQspiPsu_ReadReg(BaseAddress, XQSPIPSU_ISR_OFFSET);
+	while ((QspiPsuStatusReg & XQSPIPSU_ISR_GENFIFOEMPTY_MASK) == FALSE) {
+		QspiPsuStatusReg = XQspiPsu_ReadReg(BaseAddress,
+						XQSPIPSU_ISR_OFFSET);
+	}
+
+	/* Clear the busy flag. */
+	InstancePtr->IsBusy = FALSE;
+
+	/* Disable the device. */
+	XQspiPsu_Disable(InstancePtr);
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function initiates a transfer on the bus and enables interrupts.
+* The transfer is completed by the interrupt handler. The messages passed are
+* all transferred on the bus between one CS assert and de-assert.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Msg is a pointer to the structure containing transfer data.
+* @param	NumMsg is the number of messages to be transferred.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if transfer fails.
+*		- XST_DEVICE_BUSY if a transfer is already in progress.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XQspiPsu_InterruptTransfer(XQspiPsu *InstancePtr, XQspiPsu_Msg *Msg,
+				u32 NumMsg)
+{
+	u32 StatusReg;
+	u32 ConfigReg;
+	s32 Index;
+	u32 BaseAddress;
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	for (Index = 0; Index < (s32)NumMsg; Index++) {
+		Xil_AssertNonvoid(Msg[Index].ByteCount > 0U);
+	}
+
+	/* Check whether there is another transfer in progress. Not thread-safe */
+	if (InstancePtr->IsBusy == TRUE) {
+		return (s32)XST_DEVICE_BUSY;
+	}
+
+	/* Check for ByteCount upper limit - 2^28 for DMA */
+	for (Index = 0; Index < (s32)NumMsg; Index++) {
+		if ((Msg[Index].ByteCount > XQSPIPSU_DMA_BYTES_MAX) &&
+				((Msg[Index].Flags & XQSPIPSU_MSG_FLAG_RX) != FALSE)) {
+			return (s32)XST_FAILURE;
+		}
+	}
+
+	/*
+	 * Set the busy flag, which will be cleared when the transfer is
+	 * entirely done.
+	 */
+	InstancePtr->IsBusy = TRUE;
+
+	BaseAddress = InstancePtr->Config.BaseAddress;
+
+	InstancePtr->Msg = Msg;
+	InstancePtr->NumMsg = (s32)NumMsg;
+	InstancePtr->MsgCnt = 0;
+
+	/* Enable */
+	XQspiPsu_Enable(InstancePtr);
+
+	/* Select slave */
+	XQspiPsu_GenFifoEntryCSAssert(InstancePtr);
+
+	/* This might not work if not manual start */
+	/* Put first message in FIFO along with the above slave select */
+	XQspiPsu_GenFifoEntryData(InstancePtr, Msg, 0);
+
+	if (InstancePtr->IsManualstart == TRUE) {
+		XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_CFG_OFFSET,
+			XQspiPsu_ReadReg(BaseAddress, XQSPIPSU_CFG_OFFSET) |
+				XQSPIPSU_CFG_START_GEN_FIFO_MASK);
+	}
+
+	/* Enable interrupts */
+	XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_IER_OFFSET,
+		(u32)XQSPIPSU_IER_TXNOT_FULL_MASK | (u32)XQSPIPSU_IER_TXEMPTY_MASK |
+		(u32)XQSPIPSU_IER_RXNEMPTY_MASK | (u32)XQSPIPSU_IER_GENFIFOEMPTY_MASK |
+		(u32)XQSPIPSU_IER_RXEMPTY_MASK);
+
+	if (InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) {
+		XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_QSPIDMA_DST_I_EN_OFFSET,
+				XQSPIPSU_QSPIDMA_DST_I_EN_DONE_MASK);
+	}
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Handles interrupt based transfers by acting on GENFIFO and DMA interurpts.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if transfer fails.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XQspiPsu_InterruptHandler(XQspiPsu *InstancePtr)
+{
+	u32 QspiPsuStatusReg, DmaIntrStatusReg = 0;
+	u32 BaseAddress;
+	XQspiPsu_Msg *Msg;
+	s32 NumMsg;
+	s32 MsgCnt;
+	u8 DeltaMsgCnt = 0;
+	s32 RxThr;
+	u32 TxRxFlag;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+
+	BaseAddress = InstancePtr->Config.BaseAddress;
+	Msg = InstancePtr->Msg;
+	NumMsg = InstancePtr->NumMsg;
+	MsgCnt = InstancePtr->MsgCnt;
+	TxRxFlag = Msg[MsgCnt].Flags;
+
+	/* QSPIPSU Intr cleared on read */
+	QspiPsuStatusReg = XQspiPsu_ReadReg(BaseAddress, XQSPIPSU_ISR_OFFSET);
+	if (InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) {
+		/* DMA Intr write to clear */
+		DmaIntrStatusReg = XQspiPsu_ReadReg(BaseAddress,
+					XQSPIPSU_QSPIDMA_DST_I_STS_OFFSET);
+
+		XQspiPsu_WriteReg(BaseAddress,
+			XQSPIPSU_QSPIDMA_DST_I_STS_OFFSET, DmaIntrStatusReg);
+	}
+	if (((QspiPsuStatusReg & XQSPIPSU_ISR_POLL_TIME_EXPIRE_MASK) != FALSE) ||
+		((DmaIntrStatusReg & XQSPIPSU_QSPIDMA_DST_INTR_ERR_MASK) != FALSE)) {
+		/* Call status handler to indicate error */
+		InstancePtr->StatusHandler(InstancePtr->StatusRef,
+					XST_SPI_COMMAND_ERROR, 0);
+	}
+
+	/* Fill more data to be txed if required */
+	if ((MsgCnt < NumMsg) && ((TxRxFlag & XQSPIPSU_MSG_FLAG_TX) != FALSE) &&
+		((QspiPsuStatusReg & XQSPIPSU_ISR_TXNOT_FULL_MASK) != FALSE) &&
+		(InstancePtr->TxBytes > 0)) {
+		XQspiPsu_FillTxFifo(InstancePtr, &Msg[MsgCnt],
+				XQSPIPSU_TXD_DEPTH);
+	}
+
+	/*
+	 * Check if the entry is ONLY TX and increase MsgCnt.
+	 * This is to allow TX and RX together in one entry - corner case.
+	 */
+	if ((MsgCnt < NumMsg) && ((TxRxFlag & XQSPIPSU_MSG_FLAG_TX) != FALSE) &&
+		((QspiPsuStatusReg & XQSPIPSU_ISR_TXEMPTY_MASK) != FALSE) &&
+		((QspiPsuStatusReg & XQSPIPSU_ISR_GENFIFOEMPTY_MASK) != FALSE) &&
+		(InstancePtr->TxBytes == 0) &&
+		((TxRxFlag & XQSPIPSU_MSG_FLAG_RX) == FALSE)) {
+		MsgCnt += 1;
+		DeltaMsgCnt = 1U;
+	}
+
+	if ((InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) &&
+		(MsgCnt < NumMsg) && ((TxRxFlag & XQSPIPSU_MSG_FLAG_RX) != FALSE)) {
+		if ((DmaIntrStatusReg & XQSPIPSU_QSPIDMA_DST_I_STS_DONE_MASK) != FALSE) {
+				/* Read remaining bytes using IO mode */
+			if((InstancePtr->RxBytes % 4) != 0 ) {
+				XQspiPsu_WriteReg(BaseAddress,
+					XQSPIPSU_CFG_OFFSET, (XQspiPsu_ReadReg(
+					BaseAddress, XQSPIPSU_CFG_OFFSET) &
+					~XQSPIPSU_CFG_MODE_EN_MASK));
+				InstancePtr->ReadMode = XQSPIPSU_READMODE_IO;
+				Msg[MsgCnt].ByteCount = (InstancePtr->RxBytes % 4);
+				Msg[MsgCnt].RxBfrPtr += (InstancePtr->RxBytes -
+						(InstancePtr->RxBytes % 4));
+				InstancePtr->IsUnaligned = 1;
+				XQspiPsu_GenFifoEntryData(InstancePtr, Msg,
+						MsgCnt);
+				if(InstancePtr->IsManualstart == TRUE) {
+					XQspiPsu_WriteReg(BaseAddress,
+						XQSPIPSU_CFG_OFFSET,
+						XQspiPsu_ReadReg(BaseAddress,
+						XQSPIPSU_CFG_OFFSET) |
+						XQSPIPSU_CFG_START_GEN_FIFO_MASK);
+				}
+			}
+			else {
+				InstancePtr->RxBytes = 0;
+				MsgCnt += 1;
+				DeltaMsgCnt = 1U;
+			}
+		}
+	} else {
+		if ((MsgCnt < NumMsg) && ((TxRxFlag & XQSPIPSU_MSG_FLAG_RX) != FALSE)) {
+			if (InstancePtr->RxBytes != 0) {
+				if ((QspiPsuStatusReg & XQSPIPSU_ISR_RXNEMPTY_MASK)
+								!= FALSE) {
+					RxThr = (s32)XQspiPsu_ReadReg(BaseAddress,
+								XQSPIPSU_RX_THRESHOLD_OFFSET);
+					XQspiPsu_ReadRxFifo(InstancePtr, &Msg[MsgCnt],
+						RxThr*4);
+				} else {
+					if (((QspiPsuStatusReg & XQSPIPSU_ISR_GENFIFOEMPTY_MASK) != FALSE) &&
+						((QspiPsuStatusReg & XQSPIPSU_ISR_RXEMPTY_MASK) == FALSE)) {
+						XQspiPsu_ReadRxFifo(InstancePtr, &Msg[MsgCnt],
+							InstancePtr->RxBytes);
+					}
+				}
+				if (InstancePtr->RxBytes == 0) {
+					MsgCnt += 1;
+					DeltaMsgCnt = 1U;
+				}
+			}
+		}
+	}
+
+	/*
+	 * Dummy byte transfer
+	 * MsgCnt < NumMsg check is to ensure is it a valid dummy cycle message
+	 * If one of the above conditions increased MsgCnt, then
+	 * the new message is yet to be placed in the FIFO; hence !DeltaMsgCnt.
+	 */
+	if ((MsgCnt < NumMsg) && (DeltaMsgCnt == FALSE) &&
+		((TxRxFlag & XQSPIPSU_MSG_FLAG_RX) == FALSE) &&
+		((TxRxFlag & XQSPIPSU_MSG_FLAG_TX) == FALSE) &&
+		((QspiPsuStatusReg & XQSPIPSU_ISR_GENFIFOEMPTY_MASK) != FALSE)) {
+		MsgCnt += 1;
+		DeltaMsgCnt = 1U;
+	}
+	InstancePtr->MsgCnt = MsgCnt;
+
+	/*
+	 * DeltaMsgCnt is to handle conditions where genfifo empty can be set
+	 * while tx is still not empty or rx dma is not yet done.
+	 * MsgCnt > NumMsg indicates CS de-assert entry was also executed.
+	 */
+	if (((QspiPsuStatusReg & XQSPIPSU_ISR_GENFIFOEMPTY_MASK) != FALSE) &&
+		((DeltaMsgCnt != FALSE) || (MsgCnt > NumMsg))) {
+		if (MsgCnt < NumMsg) {
+			if(InstancePtr->IsUnaligned != 0) {
+				InstancePtr->IsUnaligned = 0;
+				XQspiPsu_WriteReg(InstancePtr->Config.
+					BaseAddress, XQSPIPSU_CFG_OFFSET,
+					(XQspiPsu_ReadReg(InstancePtr->Config.
+					BaseAddress, XQSPIPSU_CFG_OFFSET) |
+					XQSPIPSU_CFG_MODE_EN_DMA_MASK));
+				InstancePtr->ReadMode = XQSPIPSU_READMODE_DMA;
+			}
+			/* This might not work if not manual start */
+			XQspiPsu_GenFifoEntryData(InstancePtr, Msg, MsgCnt);
+
+			if (InstancePtr->IsManualstart == TRUE) {
+				XQspiPsu_WriteReg(BaseAddress,
+					XQSPIPSU_CFG_OFFSET,
+					XQspiPsu_ReadReg(BaseAddress,
+						XQSPIPSU_CFG_OFFSET) |
+						XQSPIPSU_CFG_START_GEN_FIFO_MASK);
+			}
+		} else if (MsgCnt == NumMsg) {
+			/* This is just to keep track of the de-assert entry */
+			MsgCnt += 1;
+			InstancePtr->MsgCnt = MsgCnt;
+
+			/* De-select slave */
+			XQspiPsu_GenFifoEntryCSDeAssert(InstancePtr);
+
+			if (InstancePtr->IsManualstart == TRUE) {
+				XQspiPsu_WriteReg(BaseAddress,
+					XQSPIPSU_CFG_OFFSET,
+					XQspiPsu_ReadReg(BaseAddress,
+						XQSPIPSU_CFG_OFFSET) |
+						XQSPIPSU_CFG_START_GEN_FIFO_MASK);
+			}
+		} else {
+			/* Disable interrupts */
+			XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_IDR_OFFSET,
+					(u32)XQSPIPSU_IER_TXNOT_FULL_MASK |
+					(u32)XQSPIPSU_IER_TXEMPTY_MASK |
+					(u32)XQSPIPSU_IER_RXNEMPTY_MASK |
+					(u32)XQSPIPSU_IER_GENFIFOEMPTY_MASK |
+					(u32)XQSPIPSU_IER_RXEMPTY_MASK);
+			if (InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) {
+				XQspiPsu_WriteReg(BaseAddress,
+					XQSPIPSU_QSPIDMA_DST_I_DIS_OFFSET,
+					XQSPIPSU_QSPIDMA_DST_I_EN_DONE_MASK);
+			}
+
+			/* Clear the busy flag. */
+			InstancePtr->IsBusy = FALSE;
+
+			/* Disable the device. */
+			XQspiPsu_Disable(InstancePtr);
+
+			/* Call status handler to indicate completion */
+			InstancePtr->StatusHandler(InstancePtr->StatusRef,
+						XST_SPI_TRANSFER_DONE, 0);
+		}
+	}
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Sets the status callback function, the status handler, which the driver
+* calls when it encounters conditions that should be reported to upper
+* layer software. The handler executes in an interrupt context, so it must
+* minimize the amount of processing performed. One of the following status
+* events is passed to the status handler.
+*
+* 
+*
+* XST_SPI_TRANSFER_DONE		The requested data transfer is done
+*
+* XST_SPI_TRANSMIT_UNDERRUN	As a slave device, the master clocked data
+*				but there were none available in the transmit
+*				register/FIFO. This typically means the slave
+*				application did not issue a transfer request
+*				fast enough, or the processor/driver could not
+*				fill the transmit register/FIFO fast enough.
+*
+* XST_SPI_RECEIVE_OVERRUN	The QSPIPSU device lost data. Data was received
+*				but the receive data register/FIFO was full.
+*
+* 

+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	CallBackRef is the upper layer callback reference passed back
+*		when the callback function is invoked.
+* @param	FuncPointer is the pointer to the callback function.
+*
+* @return	None.
+*
+* @note
+*
+* The handler is called within interrupt context, so it should do its work
+* quickly and queue potentially time-consuming work to a task-level thread.
+*
+******************************************************************************/
+void XQspiPsu_SetStatusHandler(XQspiPsu *InstancePtr, void *CallBackRef,
+				XQspiPsu_StatusHandler FuncPointer)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(FuncPointer != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	InstancePtr->StatusHandler = FuncPointer;
+	InstancePtr->StatusRef = CallBackRef;
+}
+
+/*****************************************************************************/
+/**
+*
+* This is a stub for the status callback. The stub is here in case the upper
+* layers forget to set the handler.
+*
+* @param	CallBackRef is a pointer to the upper layer callback reference
+* @param	StatusEvent is the event that just occurred.
+* @param	ByteCount is the number of bytes transferred up until the event
+*		occurred.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void StubStatusHandler(void *CallBackRef, u32 StatusEvent,
+				u32 ByteCount)
+{
+	(void *) CallBackRef;
+	(void) StatusEvent;
+	(void) ByteCount;
+
+	Xil_AssertVoidAlways();
+}
+
+/*****************************************************************************/
+/**
+*
+* Selects SPI mode - x1 or x2 or x4.
+*
+* @param	SpiMode - spi or dual or quad.
+* @return	Mask to set desired SPI mode in GENFIFO entry.
+*
+* @note		None.
+*
+******************************************************************************/
+static inline u32 XQspiPsu_SelectSpiMode(u8 SpiMode)
+{
+	u32 Mask;
+	switch (SpiMode) {
+		case XQSPIPSU_SELECT_MODE_DUALSPI:
+			Mask = XQSPIPSU_GENFIFO_MODE_DUALSPI;
+			break;
+		case XQSPIPSU_SELECT_MODE_QUADSPI:
+			Mask = XQSPIPSU_GENFIFO_MODE_QUADSPI;
+			break;
+		case XQSPIPSU_SELECT_MODE_SPI:
+			Mask = XQSPIPSU_GENFIFO_MODE_SPI;
+			break;
+		default:
+			Mask = XQSPIPSU_GENFIFO_MODE_SPI;
+			break;
+	}
+
+	return Mask;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function checks the TX/RX buffers in the message and setups up the
+* GENFIFO entries, TX FIFO or RX DMA as required.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Msg is a pointer to the structure containing transfer data.
+* @param	GenFifoEntry is pointer to the variable in which GENFIFO mask
+*		is returned to calling function
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static inline void XQspiPsu_TXRXSetup(XQspiPsu *InstancePtr, XQspiPsu_Msg *Msg,
+					u32 *GenFifoEntry)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	/* Transmit */
+	if (((Msg->Flags & XQSPIPSU_MSG_FLAG_TX) != FALSE) &&
+			((Msg->Flags & XQSPIPSU_MSG_FLAG_RX) == FALSE)) {
+		/* Setup data to be TXed */
+		*GenFifoEntry |= XQSPIPSU_GENFIFO_DATA_XFER;
+		*GenFifoEntry |= XQSPIPSU_GENFIFO_TX;
+		InstancePtr->TxBytes = (s32)Msg->ByteCount;
+		InstancePtr->SendBufferPtr = Msg->TxBfrPtr;
+		InstancePtr->RecvBufferPtr = NULL;
+		XQspiPsu_FillTxFifo(InstancePtr, Msg, XQSPIPSU_TXD_DEPTH);
+		/* Discard RX data */
+		*GenFifoEntry &= ~XQSPIPSU_GENFIFO_RX;
+		InstancePtr->RxBytes = 0;
+	}
+
+	/* Receive */
+	if (((Msg->Flags & XQSPIPSU_MSG_FLAG_RX) != FALSE) &&
+			((Msg->Flags & XQSPIPSU_MSG_FLAG_TX) == FALSE)) {
+		/* TX auto fill */
+		*GenFifoEntry &= ~XQSPIPSU_GENFIFO_TX;
+		InstancePtr->TxBytes = 0;
+		/* Setup RX */
+		*GenFifoEntry |= XQSPIPSU_GENFIFO_DATA_XFER;
+		*GenFifoEntry |= XQSPIPSU_GENFIFO_RX;
+		InstancePtr->RxBytes = (s32)Msg->ByteCount;
+		InstancePtr->SendBufferPtr = NULL;
+		InstancePtr->RecvBufferPtr = Msg->RxBfrPtr;
+		if (InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) {
+			XQspiPsu_SetupRxDma(InstancePtr, Msg);
+		}
+	}
+
+	/* If only dummy is requested as a separate entry */
+	if (((Msg->Flags & XQSPIPSU_MSG_FLAG_TX) == FALSE) &&
+			(Msg->Flags & XQSPIPSU_MSG_FLAG_RX) == FALSE) {
+		*GenFifoEntry |= XQSPIPSU_GENFIFO_DATA_XFER;
+		*GenFifoEntry &= ~(XQSPIPSU_GENFIFO_TX | XQSPIPSU_GENFIFO_RX);
+		InstancePtr->TxBytes = 0;
+		InstancePtr->RxBytes = 0;
+		InstancePtr->SendBufferPtr = NULL;
+		InstancePtr->RecvBufferPtr = NULL;
+	}
+
+	/* Dummy and cmd sent by upper layer to received data */
+	if (((Msg->Flags & XQSPIPSU_MSG_FLAG_TX) != FALSE) &&
+			((Msg->Flags & XQSPIPSU_MSG_FLAG_RX) != FALSE)) {
+		*GenFifoEntry |= XQSPIPSU_GENFIFO_DATA_XFER;
+		*GenFifoEntry |= (XQSPIPSU_GENFIFO_TX | XQSPIPSU_GENFIFO_RX);
+		InstancePtr->TxBytes = (s32)Msg->ByteCount;
+		InstancePtr->RxBytes = (s32)Msg->ByteCount;
+		InstancePtr->SendBufferPtr = Msg->TxBfrPtr;
+		InstancePtr->RecvBufferPtr = Msg->RxBfrPtr;
+		XQspiPsu_FillTxFifo(InstancePtr, Msg, XQSPIPSU_TXD_DEPTH);
+		/* Add check for DMA or PIO here */
+		if (InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA) {
+			XQspiPsu_SetupRxDma(InstancePtr, Msg);
+		}
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* Fills the TX FIFO as long as there is room in the FIFO or the bytes required
+* to be transmitted.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Msg is a pointer to the structure containing transfer data.
+* @param	Size is the number of bytes to be transmitted.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static inline void XQspiPsu_FillTxFifo(XQspiPsu *InstancePtr,
+					XQspiPsu_Msg *Msg, s32 Size)
+{
+	s32 Count = 0;
+	u32 Data;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	while ((InstancePtr->TxBytes > 0) && (Count < Size)) {
+		if (InstancePtr->TxBytes >= 4) {
+			(void)memcpy(&Data, Msg->TxBfrPtr, 4);
+			Msg->TxBfrPtr += 4;
+			InstancePtr->TxBytes -= 4;
+			Count += 4;
+		} else {
+			(void)memcpy(&Data, Msg->TxBfrPtr, InstancePtr->TxBytes);
+			Msg->TxBfrPtr += InstancePtr->TxBytes;
+			Count += InstancePtr->TxBytes;
+			InstancePtr->TxBytes = 0;
+		}
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+				XQSPIPSU_TXD_OFFSET, Data);
+
+	}
+	if (InstancePtr->TxBytes < 0) {
+		InstancePtr->TxBytes = 0;
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets up the RX DMA operation.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Msg is a pointer to the structure containing transfer data.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static inline void XQspiPsu_SetupRxDma(XQspiPsu *InstancePtr,
+					XQspiPsu_Msg *Msg)
+{
+	s32 Remainder;
+	s32 DmaRxBytes;
+	u64 AddrTemp;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	AddrTemp = (u64)((INTPTR)(Msg->RxBfrPtr) &
+				XQSPIPSU_QSPIDMA_DST_ADDR_MASK);
+	/* Check for RXBfrPtr to be word aligned */
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_QSPIDMA_DST_ADDR_OFFSET,
+			(u32)AddrTemp);
+
+	AddrTemp = AddrTemp >> 32;
+	if ((AddrTemp & 0xFFFU) != FALSE) {
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+				XQSPIPSU_QSPIDMA_DST_ADDR_MSB_OFFSET,
+				(u32)AddrTemp &
+				XQSPIPSU_QSPIDMA_DST_ADDR_MSB_MASK);
+	}
+
+	Remainder = InstancePtr->RxBytes % 4;
+	DmaRxBytes = InstancePtr->RxBytes;
+	if (Remainder != 0) {
+		/* This is done to make Dma bytes aligned */
+		DmaRxBytes = InstancePtr->RxBytes - Remainder;
+		Msg->ByteCount = (u32)DmaRxBytes;
+	}
+
+	Xil_DCacheInvalidateRange((INTPTR)InstancePtr->RecvBufferPtr, Msg->ByteCount);
+
+	/* Write no. of words to DMA DST SIZE */
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+			XQSPIPSU_QSPIDMA_DST_SIZE_OFFSET, (u32)DmaRxBytes);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function writes the GENFIFO entry to assert CS.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static inline void XQspiPsu_GenFifoEntryCSAssert(XQspiPsu *InstancePtr)
+{
+	u32 GenFifoEntry;
+
+	GenFifoEntry = 0x0U;
+	GenFifoEntry &= ~((u32)XQSPIPSU_GENFIFO_DATA_XFER | (u32)XQSPIPSU_GENFIFO_EXP);
+	GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_MODE_MASK);
+	GenFifoEntry |= XQSPIPSU_GENFIFO_MODE_SPI;
+	GenFifoEntry |= InstancePtr->GenFifoCS;
+	GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_BUS_MASK);
+	GenFifoEntry |= InstancePtr->GenFifoBus;
+	GenFifoEntry &= ~(XQSPIPSU_GENFIFO_TX | XQSPIPSU_GENFIFO_RX |
+			XQSPIPSU_GENFIFO_STRIPE | XQSPIPSU_GENFIFO_POLL);
+	GenFifoEntry |= XQSPIPSU_GENFIFO_CS_SETUP;
+
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_GEN_FIFO_OFFSET, GenFifoEntry);
+}
+
+/*****************************************************************************/
+/**
+*
+* This function writes the GENFIFO entries to transmit the messages requested.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Msg is a pointer to the structure containing transfer data.
+* @param	Index of the current message to be handled.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if transfer fails.
+*		- XST_DEVICE_BUSY if a transfer is already in progress.
+*
+* @note		None.
+*
+******************************************************************************/
+static inline void XQspiPsu_GenFifoEntryData(XQspiPsu *InstancePtr,
+						XQspiPsu_Msg *Msg, s32 Index)
+{
+	u32 GenFifoEntry;
+	u32 BaseAddress;
+	u32 TempCount;
+	u32 ImmData;
+
+	BaseAddress = InstancePtr->Config.BaseAddress;
+
+	GenFifoEntry = 0x0U;
+	/* Bus width */
+	GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_MODE_MASK);
+	GenFifoEntry |= XQspiPsu_SelectSpiMode((u8)Msg[Index].BusWidth);
+
+	GenFifoEntry |= InstancePtr->GenFifoCS;
+	GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_BUS_MASK);
+	GenFifoEntry |= InstancePtr->GenFifoBus;
+
+	/* Data */
+	if (((Msg[Index].Flags) & XQSPIPSU_MSG_FLAG_STRIPE) != FALSE) {
+		GenFifoEntry |= XQSPIPSU_GENFIFO_STRIPE;
+	} else {
+		GenFifoEntry &= ~XQSPIPSU_GENFIFO_STRIPE;
+	}
+
+	/* If Byte Count is less than 8 bytes do the transfer in IO mode */
+	if ((Msg[Index].ByteCount < 8U) &&
+		(InstancePtr->ReadMode == XQSPIPSU_READMODE_DMA)) {
+			InstancePtr->ReadMode = XQSPIPSU_READMODE_IO;
+			XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_CFG_OFFSET,
+				(XQspiPsu_ReadReg(BaseAddress, XQSPIPSU_CFG_OFFSET) &
+						~XQSPIPSU_CFG_MODE_EN_MASK));
+			InstancePtr->IsUnaligned = 1;
+	}
+
+	XQspiPsu_TXRXSetup(InstancePtr, &Msg[Index], &GenFifoEntry);
+
+	if (Msg[Index].ByteCount < XQSPIPSU_GENFIFO_IMM_DATA_MASK) {
+		GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_IMM_DATA_MASK);
+		GenFifoEntry |= Msg[Index].ByteCount;
+		XQspiPsu_WriteReg(BaseAddress, XQSPIPSU_GEN_FIFO_OFFSET,
+				GenFifoEntry);
+	} else {
+		TempCount = Msg[Index].ByteCount;
+		u32 Exponent = 8;	/* 2^8 = 256 */
+
+		ImmData = TempCount & 0xFFU;
+		/* Exponent entries */
+		GenFifoEntry |= XQSPIPSU_GENFIFO_EXP;
+		while (TempCount != 0U) {
+			if ((TempCount & XQSPIPSU_GENFIFO_EXP_START) != FALSE) {
+				GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_IMM_DATA_MASK);
+				GenFifoEntry |= Exponent;
+				XQspiPsu_WriteReg(BaseAddress,
+					XQSPIPSU_GEN_FIFO_OFFSET,
+					GenFifoEntry);
+			}
+			TempCount = TempCount >> 1;
+			Exponent++;
+		}
+
+		/* Immediate entry */
+		GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_EXP);
+		if ((ImmData & 0xFFU) != FALSE) {
+			GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_IMM_DATA_MASK);
+			GenFifoEntry |= ImmData & 0xFFU;
+			XQspiPsu_WriteReg(BaseAddress,
+				XQSPIPSU_GEN_FIFO_OFFSET, GenFifoEntry);
+		}
+	}
+
+	/* One dummy GenFifo entry in case of IO mode */
+	if ((InstancePtr->ReadMode == XQSPIPSU_READMODE_IO) &&
+			((Msg[Index].Flags & XQSPIPSU_MSG_FLAG_RX) != FALSE)) {
+		GenFifoEntry = 0x0U;
+		XQspiPsu_WriteReg(BaseAddress,
+				XQSPIPSU_GEN_FIFO_OFFSET, GenFifoEntry);
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* This function writes the GENFIFO entry to de-assert CS.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static inline void XQspiPsu_GenFifoEntryCSDeAssert(XQspiPsu *InstancePtr)
+{
+	u32 GenFifoEntry;
+
+	GenFifoEntry = 0x0U;
+	GenFifoEntry &= ~((u32)XQSPIPSU_GENFIFO_DATA_XFER | (u32)XQSPIPSU_GENFIFO_EXP);
+	GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_MODE_MASK);
+	GenFifoEntry |= XQSPIPSU_GENFIFO_MODE_SPI;
+	GenFifoEntry &= (u32)(~XQSPIPSU_GENFIFO_BUS_MASK);
+	GenFifoEntry |= InstancePtr->GenFifoBus;
+	GenFifoEntry &= ~(XQSPIPSU_GENFIFO_TX | XQSPIPSU_GENFIFO_RX |
+			XQSPIPSU_GENFIFO_STRIPE | XQSPIPSU_GENFIFO_POLL);
+	GenFifoEntry |= XQSPIPSU_GENFIFO_CS_HOLD;
+
+	XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+		XQSPIPSU_GEN_FIFO_OFFSET, GenFifoEntry);
+}
+
+/*****************************************************************************/
+/**
+*
+* Read the specified number of bytes from RX FIFO
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Msg is a pointer to the structure containing transfer data.
+* @param	Size is the number of bytes to be read.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static inline void XQspiPsu_ReadRxFifo(XQspiPsu *InstancePtr,
+					XQspiPsu_Msg *Msg, s32 Size)
+{
+	s32 Count = 0;
+	u32 Data;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Msg != NULL);
+
+	while ((InstancePtr->RxBytes != 0) && (Count < Size)) {
+		Data = XQspiPsu_ReadReg(InstancePtr->
+				Config.BaseAddress, XQSPIPSU_RXD_OFFSET);
+		if (InstancePtr->RxBytes >= 4) {
+			(void)memcpy(Msg->RxBfrPtr, &Data, 4);
+			InstancePtr->RxBytes -= 4;
+			Msg->RxBfrPtr += 4;
+			Count += 4;
+		} else {
+			/* Read unaligned bytes (< 4 bytes) */
+			(void)memcpy(Msg->RxBfrPtr, &Data, InstancePtr->RxBytes);
+			Msg->RxBfrPtr += InstancePtr->RxBytes;
+			Count += InstancePtr->RxBytes;
+			InstancePtr->RxBytes = 0;
+		}
+	}
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu.h
new file mode 100644
index 000000000..d34438df6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu.h
@@ -0,0 +1,272 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xqspipsu.h
+* @addtogroup qspipsu_v1_0
+* @{
+* @details
+*
+* This is the header file for the implementation of QSPIPSU driver.
+* Generic QSPI interface allows for communication to any QSPI slave device.
+* GQSPI contains a GENFIFO into which the bus transfers required are to be
+* pushed with appropriate configuration. The controller provides TX and RX
+* FIFO's and a DMA to be used for RX transfers. The controller executes each
+* GENFIFO entry noting the configuration and places data on the bus as required
+*
+* The different options in GENFIFO are as follows:
+* IMM_DATA : Can be one byte of data to be transmitted, number of clocks or
+*            number of bytes in transfer.
+* DATA_XFER : Indicates that data/clocks need to be transmitted or received.
+* EXPONENT : e when 2^e bytes are involved in transfer.
+* SPI_MODE : SPI/Dual SPI/Quad SPI
+* CS : Lower or Upper CS or Both
+* Bus : Lower or Upper Bus or Both
+* TX : When selected, controller transmits data in IMM or fetches number of
+*      bytes mentioned form TX FIFO. If not selected, dummies are pumped.
+* RX : When selected, controller receives and fills the RX FIFO/allows RX DMA
+*      of requested number of bytes. If not selected, RX data is discarded.
+* Stripe : Byte stripe over lower and upper bus or not.
+* Poll : Polls response to match for to a set value (used along with POLL_CFG
+*        registers) and then proceeds to next GENFIFO entry.
+*        This feature is not currently used in the driver.
+*
+* GENFIFO has manual and auto start options.
+* All DMA requests need a 4-byte aligned destination address buffer and
+* size of transfer should also be a multiple of 4.
+* This driver supports DMA RX and IO RX.
+*
+* Initialization:
+* This driver uses the GQSPI controller with RX DMA. It supports both
+* interrupt and polled transfers. Manual start of GENFIFO is used.
+* XQspiPsu_CfgInitialize() initializes the instance variables.
+* Additional setting can be done using SetOptions/ClearOptions functions
+* and SelectSlave function.
+*
+* Transfer:
+* Polled or Interrupt transfers can be done. The transfer function needs the
+* message(s) to be transmitted in the form of an array of type XQspiPsu_Msg.
+* This is supposed to contain the byte count and any TX/RX buffers as required.
+* Flags can be used indicate further information such as whether the message
+* should be striped. The transfer functions form and write GENFIFO entries,
+* check the status of the transfer and report back to the application
+* when done.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --- -------- -----------------------------------------------.
+* 1.0   hk  08/21/14 First release
+*       sk  03/13/15 Added IO mode support.
+*       hk  03/18/15 Switch to I/O mode before clearing RX FIFO.
+*                    Clear and disbale DMA interrupts/status in abort.
+*                    Use DMA DONE bit instead of BUSY as recommended.
+*       sk  04/24/15 Modified the code according to MISRAC-2012.
+*       sk  06/17/15 Removed NULL checks for Rx/Tx buffers. As
+*                    writing/reading from 0x0 location is permitted.
+*
+* 

+*
+******************************************************************************/
+#ifndef XQSPIPSU_H_		/* prevent circular inclusions */
+#define XQSPIPSU_H_		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xqspipsu_hw.h"
+#include "xil_cache.h"
+
+/**************************** Type Definitions *******************************/
+/**
+ * The handler data type allows the user to define a callback function to
+ * handle the asynchronous processing for the QSPIPSU device.  The application
+ * using this driver is expected to define a handler of this type to support
+ * interrupt driven mode.  The handler executes in an interrupt context, so
+ * only minimal processing should be performed.
+ *
+ * @param	CallBackRef is the callback reference passed in by the upper
+ *		layer when setting the callback functions, and passed back to
+ *		the upper layer when the callback is invoked. Its type is
+ *		not important to the driver, so it is a void pointer.
+ * @param 	StatusEvent holds one or more status events that have occurred.
+ *		See the XQspiPsu_SetStatusHandler() for details on the status
+ *		events that can be passed in the callback.
+ * @param	ByteCount indicates how many bytes of data were successfully
+ *		transferred.  This may be less than the number of bytes
+ *		requested if the status event indicates an error.
+ */
+typedef void (*XQspiPsu_StatusHandler) (void *CallBackRef, u32 StatusEvent,
+					u32 ByteCount);
+
+/**
+ * This typedef contains configuration information for a flash message.
+ */
+typedef struct {
+	u8 *TxBfrPtr;
+	u8 *RxBfrPtr;
+	u32 ByteCount;
+	u32 BusWidth;
+	u32 Flags;
+} XQspiPsu_Msg;
+
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct {
+	u16 DeviceId;		/**< Unique ID  of device */
+	u32 BaseAddress;	/**< Base address of the device */
+	u32 InputClockHz;	/**< Input clock frequency */
+	u8  ConnectionMode; /**< Single, Stacked and Parallel mode */
+	u8  BusWidth; 	/**< Bus width available on board */
+} XQspiPsu_Config;
+
+/**
+ * The XQspiPsu driver instance data. The user is required to allocate a
+ * variable of this type for every QSPIPSU device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+	XQspiPsu_Config Config;	 /**< Configuration structure */
+	u32 IsReady;		 /**< Device is initialized and ready */
+
+	u8 *SendBufferPtr;	 /**< Buffer to send (state) */
+	u8 *RecvBufferPtr;	 /**< Buffer to receive (state) */
+	u8 *GenFifoBufferPtr;	 /**< Gen FIFO entries */
+	s32 TxBytes;	 /**< Number of bytes to transfer (state) */
+	s32 RxBytes;	 /**< Number of bytes left to transfer(state) */
+	s32 GenFifoEntries;	 /**< Number of Gen FIFO entries remaining */
+	u32 IsBusy;		 /**< A transfer is in progress (state) */
+	u32 ReadMode;		 /**< DMA or IO mode */
+	u32 GenFifoCS;
+	u32 GenFifoBus;
+	s32 NumMsg;
+	s32 MsgCnt;
+	s32 IsUnaligned;
+	u8 IsManualstart;
+	XQspiPsu_Msg *Msg;
+	XQspiPsu_StatusHandler StatusHandler;
+	void *StatusRef;  	 /**< Callback reference for status handler */
+} XQspiPsu;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#define XQSPIPSU_READMODE_DMA	0x0U
+#define XQSPIPSU_READMODE_IO	0x1U
+
+#define XQSPIPSU_SELECT_FLASH_CS_LOWER	0x1U
+#define XQSPIPSU_SELECT_FLASH_CS_UPPER	0x2U
+#define XQSPIPSU_SELECT_FLASH_CS_BOTH	0x3U
+
+#define XQSPIPSU_SELECT_FLASH_BUS_LOWER	0x1U
+#define XQSPIPSU_SELECT_FLASH_BUS_UPPER	0x2U
+#define XQSPIPSU_SELECT_FLASH_BUS_BOTH	0x3U
+
+#define XQSPIPSU_SELECT_MODE_SPI	0x1U
+#define XQSPIPSU_SELECT_MODE_DUALSPI	0x2U
+#define XQSPIPSU_SELECT_MODE_QUADSPI	0x4U
+
+#define XQSPIPSU_GENFIFO_CS_SETUP	0x05U
+#define XQSPIPSU_GENFIFO_CS_HOLD	0x04U
+
+#define XQSPIPSU_CLK_ACTIVE_LOW_OPTION	0x2U
+#define XQSPIPSU_CLK_PHASE_1_OPTION	0x4U
+#define XQSPIPSU_MANUAL_START_OPTION	0x8U
+
+#define XQSPIPSU_GENFIFO_EXP_START	0x100U
+
+#define XQSPIPSU_DMA_BYTES_MAX		0x10000000U
+
+#define XQSPIPSU_CLK_PRESCALE_2		0x00U
+#define XQSPIPSU_CLK_PRESCALE_4		0x01U
+#define XQSPIPSU_CLK_PRESCALE_8		0x02U
+#define XQSPIPSU_CLK_PRESCALE_16		0x03U
+#define XQSPIPSU_CLK_PRESCALE_32		0x04U
+#define XQSPIPSU_CLK_PRESCALE_64		0x05U
+#define XQSPIPSU_CLK_PRESCALE_128	0x06U
+#define XQSPIPSU_CLK_PRESCALE_256	0x07U
+#define XQSPIPSU_CR_PRESC_MAXIMUM	7U
+
+#define XQSPIPSU_CONNECTION_MODE_SINGLE		0U
+#define XQSPIPSU_CONNECTION_MODE_STACKED	1U
+#define XQSPIPSU_CONNECTION_MODE_PARALLEL	2U
+
+/* Add more flags as required */
+#define XQSPIPSU_MSG_FLAG_STRIPE	0x1U
+#define XQSPIPSU_MSG_FLAG_RX		0x2U
+#define XQSPIPSU_MSG_FLAG_TX		0x4U
+
+#define XQspiPsu_Select(InstancePtr)	XQspiPsu_Out32(((InstancePtr)->Config.BaseAddress) + XQSPIPSU_SEL_OFFSET, XQSPIPSU_SEL_MASK)
+
+#define XQspiPsu_Enable(InstancePtr)	XQspiPsu_Out32(((InstancePtr)->Config.BaseAddress) + XQSPIPSU_EN_OFFSET, XQSPIPSU_EN_MASK)
+
+#define XQspiPsu_Disable(InstancePtr)	XQspiPsu_Out32(((InstancePtr)->Config.BaseAddress) + XQSPIPSU_EN_OFFSET, 0x0U)
+
+/************************** Function Prototypes ******************************/
+
+/* Initialization and reset */
+XQspiPsu_Config *XQspiPsu_LookupConfig(u16 DeviceId);
+s32 XQspiPsu_CfgInitialize(XQspiPsu *InstancePtr, XQspiPsu_Config *ConfigPtr,
+				u32 EffectiveAddr);
+void XQspiPsu_Reset(XQspiPsu *InstancePtr);
+void XQspiPsu_Abort(XQspiPsu *InstancePtr);
+
+/* Transfer functions and handlers */
+s32 XQspiPsu_PolledTransfer(XQspiPsu *InstancePtr, XQspiPsu_Msg *Msg,
+				u32 NumMsg);
+s32 XQspiPsu_InterruptTransfer(XQspiPsu *InstancePtr, XQspiPsu_Msg *Msg,
+				u32 NumMsg);
+s32 XQspiPsu_InterruptHandler(XQspiPsu *InstancePtr);
+void XQspiPsu_SetStatusHandler(XQspiPsu *InstancePtr, void *CallBackRef,
+				XQspiPsu_StatusHandler FuncPointer);
+
+/* Configuration functions */
+s32 XQspiPsu_SetClkPrescaler(XQspiPsu *InstancePtr, u8 Prescaler);
+void XQspiPsu_SelectFlash(XQspiPsu *InstancePtr, u8 FlashCS, u8 FlashBus);
+s32 XQspiPsu_SetOptions(XQspiPsu *InstancePtr, u32 Options);
+s32 XQspiPsu_ClearOptions(XQspiPsu *InstancePtr, u32 Options);
+u32 XQspiPsu_GetOptions(XQspiPsu *InstancePtr);
+s32 XQspiPsu_SetReadMode(XQspiPsu *InstancePtr, u32 Mode);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* XQSPIPSU_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_g.c
new file mode 100644
index 000000000..daa5bde27
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_g.c
@@ -0,0 +1,58 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xqspipsu.h"
+
+/*
+* The configuration table for devices
+*/
+
+XQspiPsu_Config XQspiPsu_ConfigTable[] =
+{
+	{
+		XPAR_PSU_QSPI_0_DEVICE_ID,
+		XPAR_PSU_QSPI_0_BASEADDR,
+		XPAR_PSU_QSPI_0_QSPI_CLK_FREQ_HZ,
+		XPAR_PSU_QSPI_0_QSPI_MODE,
+		XPAR_PSU_QSPI_0_QSPI_BUS_WIDTH
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_hw.h
new file mode 100644
index 000000000..508109019
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_hw.h
@@ -0,0 +1,841 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xqspipsu_hw.h
+* @addtogroup qspipsu_v1_0
+* @{
+*
+* This file contains low level access funcitons using the base address
+* directly without an instance.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --- -------- -----------------------------------------------.
+* 1.0   hk  08/21/14 First release
+*       hk  03/18/15 Add DMA status register masks required.
+*       sk  04/24/15 Modified the code according to MISRAC-2012.
+*
+* 

+*
+******************************************************************************/
+#ifndef _XQSPIPSU_HW_H_		/* prevent circular inclusions */
+#define _XQSPIPSU_HW_H_		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**
+ * QSPI Base Address
+ */
+#define XQSPIPS_BASEADDR      0XFF0F0000U
+
+/**
+ * GQSPI Base Address
+ */
+#define XQSPIPSU_BASEADDR     0xFF0F0100U
+#define XQSPIPSU_OFFSET     0x100U
+
+/**
+ * Register: XQSPIPS_EN_REG
+ */
+#define XQSPIPS_EN_REG    ( ( XQSPIPS_BASEADDR ) + 0X00000014U )
+
+#define XQSPIPS_EN_SHIFT   0
+#define XQSPIPS_EN_WIDTH   1
+#define XQSPIPS_EN_MASK    0X00000001U
+
+/**
+ * Register: XQSPIPSU_CFG
+ */
+#define XQSPIPSU_CFG_OFFSET    0X00000000U
+
+#define XQSPIPSU_CFG_MODE_EN_SHIFT   30
+#define XQSPIPSU_CFG_MODE_EN_WIDTH   2
+#define XQSPIPSU_CFG_MODE_EN_MASK    0XC0000000U
+#define XQSPIPSU_CFG_MODE_EN_DMA_MASK	0X80000000U
+
+#define XQSPIPSU_CFG_GEN_FIFO_START_MODE_SHIFT   29
+#define XQSPIPSU_CFG_GEN_FIFO_START_MODE_WIDTH   1
+#define XQSPIPSU_CFG_GEN_FIFO_START_MODE_MASK    0X20000000U
+
+#define XQSPIPSU_CFG_START_GEN_FIFO_SHIFT   28
+#define XQSPIPSU_CFG_START_GEN_FIFO_WIDTH   1
+#define XQSPIPSU_CFG_START_GEN_FIFO_MASK    0X10000000U
+
+#define XQSPIPSU_CFG_ENDIAN_SHIFT   26
+#define XQSPIPSU_CFG_ENDIAN_WIDTH   1
+#define XQSPIPSU_CFG_ENDIAN_MASK    0X04000000U
+
+#define XQSPIPSU_CFG_EN_POLL_TO_SHIFT   20
+#define XQSPIPSU_CFG_EN_POLL_TO_WIDTH   1
+#define XQSPIPSU_CFG_EN_POLL_TO_MASK    0X00100000U
+
+#define XQSPIPSU_CFG_WP_HOLD_SHIFT   19
+#define XQSPIPSU_CFG_WP_HOLD_WIDTH   1
+#define XQSPIPSU_CFG_WP_HOLD_MASK    0X00080000U
+
+#define XQSPIPSU_CFG_BAUD_RATE_DIV_SHIFT   3
+#define XQSPIPSU_CFG_BAUD_RATE_DIV_WIDTH   3
+#define XQSPIPSU_CFG_BAUD_RATE_DIV_MASK    0X00000038U
+
+#define XQSPIPSU_CFG_CLK_PHA_SHIFT   2
+#define XQSPIPSU_CFG_CLK_PHA_WIDTH   1
+#define XQSPIPSU_CFG_CLK_PHA_MASK    0X00000004U
+
+#define XQSPIPSU_CFG_CLK_POL_SHIFT   1
+#define XQSPIPSU_CFG_CLK_POL_WIDTH   1
+#define XQSPIPSU_CFG_CLK_POL_MASK    0X00000002U
+
+/**
+ * Register: XQSPIPSU_ISR
+ */
+#define XQSPIPSU_ISR_OFFSET	0X00000004U
+
+#define XQSPIPSU_ISR_RXEMPTY_SHIFT   11
+#define XQSPIPSU_ISR_RXEMPTY_WIDTH   1
+#define XQSPIPSU_ISR_RXEMPTY_MASK    0X00000800U
+
+#define XQSPIPSU_ISR_GENFIFOFULL_SHIFT   10
+#define XQSPIPSU_ISR_GENFIFOFULL_WIDTH   1
+#define XQSPIPSU_ISR_GENFIFOFULL_MASK    0X00000400U
+
+#define XQSPIPSU_ISR_GENFIFONOT_FULL_SHIFT   9
+#define XQSPIPSU_ISR_GENFIFONOT_FULL_WIDTH   1
+#define XQSPIPSU_ISR_GENFIFONOT_FULL_MASK    0X00000200U
+
+#define XQSPIPSU_ISR_TXEMPTY_SHIFT   8
+#define XQSPIPSU_ISR_TXEMPTY_WIDTH   1
+#define XQSPIPSU_ISR_TXEMPTY_MASK    0X00000100U
+
+#define XQSPIPSU_ISR_GENFIFOEMPTY_SHIFT   7
+#define XQSPIPSU_ISR_GENFIFOEMPTY_WIDTH   1
+#define XQSPIPSU_ISR_GENFIFOEMPTY_MASK    0X00000080U
+
+#define XQSPIPSU_ISR_RXFULL_SHIFT   5
+#define XQSPIPSU_ISR_RXFULL_WIDTH   1
+#define XQSPIPSU_ISR_RXFULL_MASK    0X00000020U
+
+#define XQSPIPSU_ISR_RXNEMPTY_SHIFT   4
+#define XQSPIPSU_ISR_RXNEMPTY_WIDTH   1
+#define XQSPIPSU_ISR_RXNEMPTY_MASK    0X00000010U
+
+#define XQSPIPSU_ISR_TXFULL_SHIFT   3
+#define XQSPIPSU_ISR_TXFULL_WIDTH   1
+#define XQSPIPSU_ISR_TXFULL_MASK    0X00000008U
+
+#define XQSPIPSU_ISR_TXNOT_FULL_SHIFT   2
+#define XQSPIPSU_ISR_TXNOT_FULL_WIDTH   1
+#define XQSPIPSU_ISR_TXNOT_FULL_MASK    0X00000004U
+
+#define XQSPIPSU_ISR_POLL_TIME_EXPIRE_SHIFT   1
+#define XQSPIPSU_ISR_POLL_TIME_EXPIRE_WIDTH   1
+#define XQSPIPSU_ISR_POLL_TIME_EXPIRE_MASK    0X00000002U
+
+#define XQSPIPSU_ISR_WR_TO_CLR_MASK 0X00000002U
+
+/**
+ * Register: XQSPIPSU_IER
+ */
+#define XQSPIPSU_IER_OFFSET    0X00000008U
+
+#define XQSPIPSU_IER_RXEMPTY_SHIFT   11
+#define XQSPIPSU_IER_RXEMPTY_WIDTH   1
+#define XQSPIPSU_IER_RXEMPTY_MASK    0X00000800U
+
+#define XQSPIPSU_IER_GENFIFOFULL_SHIFT   10
+#define XQSPIPSU_IER_GENFIFOFULL_WIDTH   1
+#define XQSPIPSU_IER_GENFIFOFULL_MASK    0X00000400U
+
+#define XQSPIPSU_IER_GENFIFONOT_FULL_SHIFT   9
+#define XQSPIPSU_IER_GENFIFONOT_FULL_WIDTH   1
+#define XQSPIPSU_IER_GENFIFONOT_FULL_MASK    0X00000200U
+
+#define XQSPIPSU_IER_TXEMPTY_SHIFT   8
+#define XQSPIPSU_IER_TXEMPTY_WIDTH   1
+#define XQSPIPSU_IER_TXEMPTY_MASK    0X00000100U
+
+#define XQSPIPSU_IER_GENFIFOEMPTY_SHIFT   7
+#define XQSPIPSU_IER_GENFIFOEMPTY_WIDTH   1
+#define XQSPIPSU_IER_GENFIFOEMPTY_MASK    0X00000080U
+
+#define XQSPIPSU_IER_RXFULL_SHIFT   5
+#define XQSPIPSU_IER_RXFULL_WIDTH   1
+#define XQSPIPSU_IER_RXFULL_MASK    0X00000020U
+
+#define XQSPIPSU_IER_RXNEMPTY_SHIFT   4
+#define XQSPIPSU_IER_RXNEMPTY_WIDTH   1
+#define XQSPIPSU_IER_RXNEMPTY_MASK    0X00000010U
+
+#define XQSPIPSU_IER_TXFULL_SHIFT   3
+#define XQSPIPSU_IER_TXFULL_WIDTH   1
+#define XQSPIPSU_IER_TXFULL_MASK    0X00000008U
+
+#define XQSPIPSU_IER_TXNOT_FULL_SHIFT   2
+#define XQSPIPSU_IER_TXNOT_FULL_WIDTH   1
+#define XQSPIPSU_IER_TXNOT_FULL_MASK    0X00000004U
+
+#define XQSPIPSU_IER_POLL_TIME_EXPIRE_SHIFT   1
+#define XQSPIPSU_IER_POLL_TIME_EXPIRE_WIDTH   1
+#define XQSPIPSU_IER_POLL_TIME_EXPIRE_MASK    0X00000002U
+
+/**
+ * Register: XQSPIPSU_IDR
+ */
+#define XQSPIPSU_IDR_OFFSET    0X0000000CU
+
+#define XQSPIPSU_IDR_RXEMPTY_SHIFT   11
+#define XQSPIPSU_IDR_RXEMPTY_WIDTH   1
+#define XQSPIPSU_IDR_RXEMPTY_MASK    0X00000800U
+
+#define XQSPIPSU_IDR_GENFIFOFULL_SHIFT   10
+#define XQSPIPSU_IDR_GENFIFOFULL_WIDTH   1
+#define XQSPIPSU_IDR_GENFIFOFULL_MASK    0X00000400U
+
+#define XQSPIPSU_IDR_GENFIFONOT_FULL_SHIFT   9
+#define XQSPIPSU_IDR_GENFIFONOT_FULL_WIDTH   1
+#define XQSPIPSU_IDR_GENFIFONOT_FULL_MASK    0X00000200U
+
+#define XQSPIPSU_IDR_TXEMPTY_SHIFT   8
+#define XQSPIPSU_IDR_TXEMPTY_WIDTH   1
+#define XQSPIPSU_IDR_TXEMPTY_MASK    0X00000100U
+
+#define XQSPIPSU_IDR_GENFIFOEMPTY_SHIFT   7
+#define XQSPIPSU_IDR_GENFIFOEMPTY_WIDTH   1
+#define XQSPIPSU_IDR_GENFIFOEMPTY_MASK    0X00000080U
+
+#define XQSPIPSU_IDR_RXFULL_SHIFT   5
+#define XQSPIPSU_IDR_RXFULL_WIDTH   1
+#define XQSPIPSU_IDR_RXFULL_MASK    0X00000020U
+
+#define XQSPIPSU_IDR_RXNEMPTY_SHIFT   4
+#define XQSPIPSU_IDR_RXNEMPTY_WIDTH   1
+#define XQSPIPSU_IDR_RXNEMPTY_MASK    0X00000010U
+
+#define XQSPIPSU_IDR_TXFULL_SHIFT   3
+#define XQSPIPSU_IDR_TXFULL_WIDTH   1
+#define XQSPIPSU_IDR_TXFULL_MASK    0X00000008U
+
+#define XQSPIPSU_IDR_TXNOT_FULL_SHIFT   2
+#define XQSPIPSU_IDR_TXNOT_FULL_WIDTH   1
+#define XQSPIPSU_IDR_TXNOT_FULL_MASK    0X00000004U
+
+#define XQSPIPSU_IDR_POLL_TIME_EXPIRE_SHIFT   1
+#define XQSPIPSU_IDR_POLL_TIME_EXPIRE_WIDTH   1
+#define XQSPIPSU_IDR_POLL_TIME_EXPIRE_MASK    0X00000002U
+
+#define XQSPIPSU_IDR_ALL_MASK    0X0FBEU
+
+/**
+ * Register: XQSPIPSU_IMR
+ */
+#define XQSPIPSU_IMR_OFFSET    0X00000010U
+
+#define XQSPIPSU_IMR_RXEMPTY_SHIFT   11
+#define XQSPIPSU_IMR_RXEMPTY_WIDTH   1
+#define XQSPIPSU_IMR_RXEMPTY_MASK    0X00000800U
+
+#define XQSPIPSU_IMR_GENFIFOFULL_SHIFT   10
+#define XQSPIPSU_IMR_GENFIFOFULL_WIDTH   1
+#define XQSPIPSU_IMR_GENFIFOFULL_MASK    0X00000400U
+
+#define XQSPIPSU_IMR_GENFIFONOT_FULL_SHIFT   9
+#define XQSPIPSU_IMR_GENFIFONOT_FULL_WIDTH   1
+#define XQSPIPSU_IMR_GENFIFONOT_FULL_MASK    0X00000200U
+
+#define XQSPIPSU_IMR_TXEMPTY_SHIFT   8
+#define XQSPIPSU_IMR_TXEMPTY_WIDTH   1
+#define XQSPIPSU_IMR_TXEMPTY_MASK    0X00000100U
+
+#define XQSPIPSU_IMR_GENFIFOEMPTY_SHIFT   7
+#define XQSPIPSU_IMR_GENFIFOEMPTY_WIDTH   1
+#define XQSPIPSU_IMR_GENFIFOEMPTY_MASK    0X00000080U
+
+#define XQSPIPSU_IMR_RXFULL_SHIFT   5
+#define XQSPIPSU_IMR_RXFULL_WIDTH   1
+#define XQSPIPSU_IMR_RXFULL_MASK    0X00000020U
+
+#define XQSPIPSU_IMR_RXNEMPTY_SHIFT   4
+#define XQSPIPSU_IMR_RXNEMPTY_WIDTH   1
+#define XQSPIPSU_IMR_RXNEMPTY_MASK    0X00000010U
+
+#define XQSPIPSU_IMR_TXFULL_SHIFT   3
+#define XQSPIPSU_IMR_TXFULL_WIDTH   1
+#define XQSPIPSU_IMR_TXFULL_MASK    0X00000008U
+
+#define XQSPIPSU_IMR_TXNOT_FULL_SHIFT   2
+#define XQSPIPSU_IMR_TXNOT_FULL_WIDTH   1
+#define XQSPIPSU_IMR_TXNOT_FULL_MASK    0X00000004U
+
+#define XQSPIPSU_IMR_POLL_TIME_EXPIRE_SHIFT   1
+#define XQSPIPSU_IMR_POLL_TIME_EXPIRE_WIDTH   1
+#define XQSPIPSU_IMR_POLL_TIME_EXPIRE_MASK    0X00000002U
+
+/**
+ * Register: XQSPIPSU_EN_REG
+ */
+#define XQSPIPSU_EN_OFFSET    0X00000014U
+
+#define XQSPIPSU_EN_SHIFT   0
+#define XQSPIPSU_EN_WIDTH   1
+#define XQSPIPSU_EN_MASK    0X00000001U
+
+/**
+ * Register: XQSPIPSU_TXD
+ */
+#define XQSPIPSU_TXD_OFFSET    0X0000001CU
+
+#define XQSPIPSU_TXD_SHIFT   0
+#define XQSPIPSU_TXD_WIDTH   32
+#define XQSPIPSU_TXD_MASK    0XFFFFFFFFU
+
+#define XQSPIPSU_TXD_DEPTH    64
+
+/**
+ * Register: XQSPIPSU_RXD
+ */
+#define XQSPIPSU_RXD_OFFSET    0X00000020U
+
+#define XQSPIPSU_RXD_SHIFT   0
+#define XQSPIPSU_RXD_WIDTH   32
+#define XQSPIPSU_RXD_MASK    0XFFFFFFFFU
+
+/**
+ * Register: XQSPIPSU_TX_THRESHOLD
+ */
+#define XQSPIPSU_TX_THRESHOLD_OFFSET    0X00000028U
+
+#define XQSPIPSU_TX_FIFO_THRESHOLD_SHIFT   0
+#define XQSPIPSU_TX_FIFO_THRESHOLD_WIDTH   6
+#define XQSPIPSU_TX_FIFO_THRESHOLD_MASK    0X0000003FU
+#define XQSPIPSU_TX_FIFO_THRESHOLD_RESET_VAL    0X01U
+
+/**
+ * Register: XQSPIPSU_RX_THRESHOLD
+ */
+#define XQSPIPSU_RX_THRESHOLD_OFFSET    0X0000002CU
+
+#define XQSPIPSU_RX_FIFO_THRESHOLD_SHIFT   0
+#define XQSPIPSU_RX_FIFO_THRESHOLD_WIDTH   6
+#define XQSPIPSU_RX_FIFO_THRESHOLD_MASK    0X0000003FU
+#define XQSPIPSU_RX_FIFO_THRESHOLD_RESET_VAL    0X01U
+
+#define XQSPIPSU_RXFIFO_THRESHOLD_OPT 32U
+
+/**
+ * Register: XQSPIPSU_GPIO
+ */
+#define XQSPIPSU_GPIO_OFFSET    0X00000030U
+
+#define XQSPIPSU_GPIO_WP_N_SHIFT   0
+#define XQSPIPSU_GPIO_WP_N_WIDTH   1
+#define XQSPIPSU_GPIO_WP_N_MASK    0X00000001U
+
+/**
+ * Register: XQSPIPSU_LPBK_DLY_ADJ
+ */
+#define XQSPIPSU_LPBK_DLY_ADJ_OFFSET    0X00000038U
+
+#define XQSPIPSU_LPBK_DLY_ADJ_USE_LPBK_SHIFT   5
+#define XQSPIPSU_LPBK_DLY_ADJ_USE_LPBK_WIDTH   1
+#define XQSPIPSU_LPBK_DLY_ADJ_USE_LPBK_MASK    0X00000020U
+
+#define XQSPIPSU_LPBK_DLY_ADJ_DLY1_SHIFT   3
+#define XQSPIPSU_LPBK_DLY_ADJ_DLY1_WIDTH   2
+#define XQSPIPSU_LPBK_DLY_ADJ_DLY1_MASK    0X00000018U
+
+#define XQSPIPSU_LPBK_DLY_ADJ_DLY0_SHIFT   0
+#define XQSPIPSU_LPBK_DLY_ADJ_DLY0_WIDTH   3
+#define XQSPIPSU_LPBK_DLY_ADJ_DLY0_MASK    0X00000007U
+
+/**
+ * Register: XQSPIPSU_GEN_FIFO
+ */
+#define XQSPIPSU_GEN_FIFO_OFFSET    0X00000040U
+
+#define XQSPIPSU_GEN_FIFO_DATA_SHIFT   0
+#define XQSPIPSU_GEN_FIFO_DATA_WIDTH   20
+#define XQSPIPSU_GEN_FIFO_DATA_MASK    0X000FFFFFU
+
+/**
+ * Register: XQSPIPSU_SEL
+ */
+#define XQSPIPSU_SEL_OFFSET    0X00000044U
+
+#define XQSPIPSU_SEL_SHIFT   0
+#define XQSPIPSU_SEL_WIDTH   1
+#define XQSPIPSU_SEL_MASK    0X00000001U
+
+/**
+ * Register: XQSPIPSU_FIFO_CTRL
+ */
+#define XQSPIPSU_FIFO_CTRL_OFFSET    0X0000004CU
+
+#define XQSPIPSU_FIFO_CTRL_RST_RX_FIFO_SHIFT   2
+#define XQSPIPSU_FIFO_CTRL_RST_RX_FIFO_WIDTH   1
+#define XQSPIPSU_FIFO_CTRL_RST_RX_FIFO_MASK    0X00000004U
+
+#define XQSPIPSU_FIFO_CTRL_RST_TX_FIFO_SHIFT   1
+#define XQSPIPSU_FIFO_CTRL_RST_TX_FIFO_WIDTH   1
+#define XQSPIPSU_FIFO_CTRL_RST_TX_FIFO_MASK    0X00000002U
+
+#define XQSPIPSU_FIFO_CTRL_RST_GEN_FIFO_SHIFT   0
+#define XQSPIPSU_FIFO_CTRL_RST_GEN_FIFO_WIDTH   1
+#define XQSPIPSU_FIFO_CTRL_RST_GEN_FIFO_MASK    0X00000001U
+
+/**
+ * Register: XQSPIPSU_GF_THRESHOLD
+ */
+#define XQSPIPSU_GF_THRESHOLD_OFFSET    0X00000050U
+
+#define XQSPIPSU_GEN_FIFO_THRESHOLD_SHIFT   0
+#define XQSPIPSU_GEN_FIFO_THRESHOLD_WIDTH   5
+#define XQSPIPSU_GEN_FIFO_THRESHOLD_MASK    0X0000001F
+#define XQSPIPSU_GEN_FIFO_THRESHOLD_RESET_VAL    0X10U
+
+/**
+ * Register: XQSPIPSU_POLL_CFG
+ */
+#define XQSPIPSU_POLL_CFG_OFFSET    0X00000054U
+
+#define XQSPIPSU_POLL_CFG_EN_MASK_UPPER_SHIFT   31
+#define XQSPIPSU_POLL_CFG_EN_MASK_UPPER_WIDTH   1
+#define XQSPIPSU_POLL_CFG_EN_MASK_UPPER_MASK    0X80000000U
+
+#define XQSPIPSU_POLL_CFG_EN_MASK_LOWER_SHIFT   30
+#define XQSPIPSU_POLL_CFG_EN_MASK_LOWER_WIDTH   1
+#define XQSPIPSU_POLL_CFG_EN_MASK_LOWER_MASK    0X40000000U
+
+#define XQSPIPSU_POLL_CFG_MASK_EN_SHIFT   8
+#define XQSPIPSU_POLL_CFG_MASK_EN_WIDTH   8
+#define XQSPIPSU_POLL_CFG_MASK_EN_MASK    0X0000FF00U
+
+#define XQSPIPSU_POLL_CFG_DATA_VALUE_SHIFT   0
+#define XQSPIPSU_POLL_CFG_DATA_VALUE_WIDTH   8
+#define XQSPIPSU_POLL_CFG_DATA_VALUE_MASK    0X000000FFU
+
+/**
+ * Register: XQSPIPSU_P_TIMEOUT
+ */
+#define XQSPIPSU_P_TO_OFFSET    0X00000058U
+
+#define XQSPIPSU_P_TO_VALUE_SHIFT   0
+#define XQSPIPSU_P_TO_VALUE_WIDTH   32
+#define XQSPIPSU_P_TO_VALUE_MASK    0XFFFFFFFFU
+
+/**
+ * Register: XQSPIPSU_XFER_STS
+ */
+#define XQSPIPSU_XFER_STS_OFFSET	0X0000005CU
+
+#define XQSPIPSU_XFER_STS_PEND_BYTES_SHIFT   0
+#define XQSPIPSU_XFER_STS_PEND_BYTES_WIDTH   32
+#define XQSPIPSU_XFER_STS_PEND_BYTES_MASK    0XFFFFFFFFU
+
+/**
+ * Register: XQSPIPSU_GF_SNAPSHOT
+ */
+#define XQSPIPSU_GF_SNAPSHOT_OFFSET    0X00000060U
+
+#define XQSPIPSU_GF_SNAPSHOT_SHIFT   0
+#define XQSPIPSU_GF_SNAPSHOT_WIDTH   20
+#define XQSPIPSU_GF_SNAPSHOT_MASK    0X000FFFFFU
+
+/**
+ * Register: XQSPIPSU_RX_COPY
+ */
+#define XQSPIPSU_RX_COPY_OFFSET    0X00000064U
+
+#define XQSPIPSU_RX_COPY_UPPER_SHIFT   8
+#define XQSPIPSU_RX_COPY_UPPER_WIDTH   8
+#define XQSPIPSU_RX_COPY_UPPER_MASK    0X0000FF00U
+
+#define XQSPIPSU_RX_COPY_LOWER_SHIFT   0
+#define XQSPIPSU_RX_COPY_LOWER_WIDTH   8
+#define XQSPIPSU_RX_COPY_LOWER_MASK    0X000000FFU
+
+/**
+ * Register: XQSPIPSU_MOD_ID
+ */
+#define XQSPIPSU_MOD_ID_OFFSET    0X000000FCU
+
+#define XQSPIPSU_MOD_ID_SHIFT   0
+#define XQSPIPSU_MOD_ID_WIDTH   32
+#define XQSPIPSU_MOD_ID_MASK    0XFFFFFFFFU
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_ADDR
+ */
+#define XQSPIPSU_QSPIDMA_DST_ADDR_OFFSET    0X00000700U
+
+#define XQSPIPSU_QSPIDMA_DST_ADDR_SHIFT   2
+#define XQSPIPSU_QSPIDMA_DST_ADDR_WIDTH   30
+#define XQSPIPSU_QSPIDMA_DST_ADDR_MASK    0XFFFFFFFCU
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_SIZE
+ */
+#define XQSPIPSU_QSPIDMA_DST_SIZE_OFFSET    0X00000704U
+
+#define XQSPIPSU_QSPIDMA_DST_SIZE_SHIFT   2
+#define XQSPIPSU_QSPIDMA_DST_SIZE_WIDTH   27
+#define XQSPIPSU_QSPIDMA_DST_SIZE_MASK    0X1FFFFFFCU
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_STS
+ */
+#define XQSPIPSU_QSPIDMA_DST_STS_OFFSET    0X00000708U
+
+#define XQSPIPSU_QSPIDMA_DST_STS_DONE_CNT_SHIFT   13
+#define XQSPIPSU_QSPIDMA_DST_STS_DONE_CNT_WIDTH   3
+#define XQSPIPSU_QSPIDMA_DST_STS_DONE_CNT_MASK    0X0000E000U
+
+#define XQSPIPSU_QSPIDMA_DST_STS_DST_FIFO_LEVEL_SHIFT   5
+#define XQSPIPSU_QSPIDMA_DST_STS_DST_FIFO_LEVEL_WIDTH   8
+#define XQSPIPSU_QSPIDMA_DST_STS_DST_FIFO_LEVEL_MASK    0X00001FE0U
+
+#define XQSPIPSU_QSPIDMA_DST_STS_WR_OUTSTANDING_SHIFT   1
+#define XQSPIPSU_QSPIDMA_DST_STS_WR_OUTSTANDING_WIDTH   4
+#define XQSPIPSU_QSPIDMA_DST_STS_WR_OUTSTANDING_MASK    0X0000001EU
+
+#define XQSPIPSU_QSPIDMA_DST_STS_BUSY_SHIFT   0
+#define XQSPIPSU_QSPIDMA_DST_STS_BUSY_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_STS_BUSY_MASK    0X00000001U
+
+#define XQSPIPSU_QSPIDMA_DST_STS_WTC	0xE000U
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_CTRL
+ */
+#define XQSPIPSU_QSPIDMA_DST_CTRL_OFFSET    0X0000070CU
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_FIFO_LVL_HIT_THRESHOLD_SHIFT   25
+#define XQSPIPSU_QSPIDMA_DST_CTRL_FIFO_LVL_HIT_THRESHOLD_WIDTH   7
+#define XQSPIPSU_QSPIDMA_DST_CTRL_FIFO_LVL_HIT_THRESHOLD_MASK    0XFE000000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_APB_ERR_RESP_SHIFT   24
+#define XQSPIPSU_QSPIDMA_DST_CTRL_APB_ERR_RESP_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL_APB_ERR_RESP_MASK    0X01000000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_ENDIAN_SHIFT   23
+#define XQSPIPSU_QSPIDMA_DST_CTRL_ENDIAN_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL_ENDIAN_MASK    0X00800000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_AXI_BRST_TYPE_SHIFT   22
+#define XQSPIPSU_QSPIDMA_DST_CTRL_AXI_BRST_TYPE_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL_AXI_BRST_TYPE_MASK    0X00400000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_TO_VAL_SHIFT   10
+#define XQSPIPSU_QSPIDMA_DST_CTRL_TO_VAL_WIDTH   12
+#define XQSPIPSU_QSPIDMA_DST_CTRL_TO_VAL_MASK    0X003FFC00U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_FIFO_THRESHOLD_SHIFT   2
+#define XQSPIPSU_QSPIDMA_DST_CTRL_FIFO_THRESHOLD_WIDTH   8
+#define XQSPIPSU_QSPIDMA_DST_CTRL_FIFO_THRESHOLD_MASK    0X000003FCU
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_PAUSE_STRM_SHIFT   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL_PAUSE_STRM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL_PAUSE_STRM_MASK    0X00000002U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_PAUSE_MEM_SHIFT   0
+#define XQSPIPSU_QSPIDMA_DST_CTRL_PAUSE_MEM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL_PAUSE_MEM_MASK    0X00000001U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL_RESET_VAL	0x403FFA00U
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_I_STS
+ */
+#define XQSPIPSU_QSPIDMA_DST_I_STS_OFFSET    0X00000714U
+
+#define XQSPIPSU_QSPIDMA_DST_I_STS_FIFO_OF_SHIFT   7
+#define XQSPIPSU_QSPIDMA_DST_I_STS_FIFO_OF_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_FIFO_OF_MASK    0X00000080U
+
+#define XQSPIPSU_QSPIDMA_DST_I_STS_INVALID_APB_SHIFT   6
+#define XQSPIPSU_QSPIDMA_DST_I_STS_INVALID_APB_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_INVALID_APB_MASK    0X00000040U
+
+#define XQSPIPSU_QSPIDMA_DST_I_STS_THRESHOLD_HIT_SHIFT   5
+#define XQSPIPSU_QSPIDMA_DST_I_STS_THRESHOLD_HIT_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_THRESHOLD_HIT_MASK    0X00000020U
+
+#define XQSPIPSU_QSPIDMA_DST_I_STS_TO_MEM_SHIFT   4
+#define XQSPIPSU_QSPIDMA_DST_I_STS_TO_MEM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_TO_MEM_MASK    0X00000010U
+
+#define XQSPIPSU_QSPIDMA_DST_I_STS_TO_STRM_SHIFT   3
+#define XQSPIPSU_QSPIDMA_DST_I_STS_TO_STRM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_TO_STRM_MASK    0X00000008U
+
+#define XQSPIPSU_QSPIDMA_DST_I_STS_AXI_BRESP_ERR_SHIFT   2
+#define XQSPIPSU_QSPIDMA_DST_I_STS_AXI_BRESP_ERR_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_AXI_BRESP_ERR_MASK    0X00000004U
+
+#define XQSPIPSU_QSPIDMA_DST_I_STS_DONE_SHIFT   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_DONE_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_STS_DONE_MASK    0X00000002U
+
+#define XQSPIPSU_QSPIDMA_DST_INTR_ERR_MASK    0X000000FCU
+#define XQSPIPSU_QSPIDMA_DST_INTR_ALL_MASK    0X000000FEU
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_I_EN
+ */
+#define XQSPIPSU_QSPIDMA_DST_I_EN_OFFSET    0X00000718U
+
+#define XQSPIPSU_QSPIDMA_DST_I_EN_FIFO_OF_SHIFT   7
+#define XQSPIPSU_QSPIDMA_DST_I_EN_FIFO_OF_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_FIFO_OF_MASK    0X00000080U
+
+#define XQSPIPSU_QSPIDMA_DST_I_EN_INVALID_APB_SHIFT   6
+#define XQSPIPSU_QSPIDMA_DST_I_EN_INVALID_APB_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_INVALID_APB_MASK    0X00000040U
+
+#define XQSPIPSU_QSPIDMA_DST_I_EN_THRESHOLD_HIT_SHIFT   5
+#define XQSPIPSU_QSPIDMA_DST_I_EN_THRESHOLD_HIT_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_THRESHOLD_HIT_MASK    0X00000020U
+
+#define XQSPIPSU_QSPIDMA_DST_I_EN_TO_MEM_SHIFT   4
+#define XQSPIPSU_QSPIDMA_DST_I_EN_TO_MEM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_TO_MEM_MASK    0X00000010U
+
+#define XQSPIPSU_QSPIDMA_DST_I_EN_TO_STRM_SHIFT   3
+#define XQSPIPSU_QSPIDMA_DST_I_EN_TO_STRM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_TO_STRM_MASK    0X00000008U
+
+#define XQSPIPSU_QSPIDMA_DST_I_EN_AXI_BRESP_ERR_SHIFT   2
+#define XQSPIPSU_QSPIDMA_DST_I_EN_AXI_BRESP_ERR_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_AXI_BRESP_ERR_MASK    0X00000004U
+
+#define XQSPIPSU_QSPIDMA_DST_I_EN_DONE_SHIFT   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_DONE_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_EN_DONE_MASK    0X00000002U
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_I_DIS
+ */
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_OFFSET    0X0000071CU
+
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_FIFO_OF_SHIFT   7
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_FIFO_OF_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_FIFO_OF_MASK    0X00000080U
+
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_INVALID_APB_SHIFT   6
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_INVALID_APB_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_INVALID_APB_MASK    0X00000040U
+
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_THRESHOLD_HIT_SHIFT   5
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_THRESHOLD_HIT_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_THRESHOLD_HIT_MASK    0X00000020U
+
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_TO_MEM_SHIFT   4
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_TO_MEM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_TO_MEM_MASK    0X00000010U
+
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_TO_STRM_SHIFT   3
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_TO_STRM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_TO_STRM_MASK    0X00000008U
+
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_AXI_BRESP_ERR_SHIFT   2
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_AXI_BRESP_ERR_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_AXI_BRESP_ERR_MASK    0X00000004U
+
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_DONE_SHIFT   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_DONE_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_I_DIS_DONE_MASK    0X00000002U
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_IMR
+ */
+#define XQSPIPSU_QSPIDMA_DST_IMR_OFFSET    0X00000720U
+
+#define XQSPIPSU_QSPIDMA_DST_IMR_FIFO_OF_SHIFT   7
+#define XQSPIPSU_QSPIDMA_DST_IMR_FIFO_OF_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_FIFO_OF_MASK    0X00000080U
+
+#define XQSPIPSU_QSPIDMA_DST_IMR_INVALID_APB_SHIFT   6
+#define XQSPIPSU_QSPIDMA_DST_IMR_INVALID_APB_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_INVALID_APB_MASK    0X00000040U
+
+#define XQSPIPSU_QSPIDMA_DST_IMR_THRESHOLD_HIT_SHIFT   5
+#define XQSPIPSU_QSPIDMA_DST_IMR_THRESHOLD_HIT_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_THRESHOLD_HIT_MASK    0X00000020U
+
+#define XQSPIPSU_QSPIDMA_DST_IMR_TO_MEM_SHIFT   4
+#define XQSPIPSU_QSPIDMA_DST_IMR_TO_MEM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_TO_MEM_MASK    0X00000010U
+
+#define XQSPIPSU_QSPIDMA_DST_IMR_TO_STRM_SHIFT   3
+#define XQSPIPSU_QSPIDMA_DST_IMR_TO_STRM_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_TO_STRM_MASK    0X00000008U
+
+#define XQSPIPSU_QSPIDMA_DST_IMR_AXI_BRESP_ERR_SHIFT   2
+#define XQSPIPSU_QSPIDMA_DST_IMR_AXI_BRESP_ERR_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_AXI_BRESP_ERR_MASK    0X00000004U
+
+#define XQSPIPSU_QSPIDMA_DST_IMR_DONE_SHIFT   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_DONE_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_IMR_DONE_MASK    0X00000002U
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_CTRL2
+ */
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_OFFSET    0X00000724U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMASA_SHIFT   27
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMASA_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMASA_MASK    0X08000000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_AWCACHE_SHIFT   24
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_AWCACHE_WIDTH   3
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_AWCACHE_MASK    0X07000000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_TO_EN_SHIFT   22
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_TO_EN_WIDTH   1
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_TO_EN_MASK    0X00400000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMAB_SHIFT   19
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMAB_WIDTH   3
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMAB_MASK    0X00380000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMAA_SHIFT   16
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMAA_WIDTH   3
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_RAM_EMAA_MASK    0X00070000U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_TO_PRE_SHIFT   4
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_TO_PRE_WIDTH   12
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_TO_PRE_MASK    0X0000FFF0U
+
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_MAX_OUTS_CMDS_SHIFT   0
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_MAX_OUTS_CMDS_WIDTH   4
+#define XQSPIPSU_QSPIDMA_DST_CTRL2_MAX_OUTS_CMDS_MASK    0X0000000FU
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_DST_ADDR_MSB
+ */
+#define XQSPIPSU_QSPIDMA_DST_ADDR_MSB_OFFSET    0X00000728U
+
+#define XQSPIPSU_QSPIDMA_DST_ADDR_MSB_SHIFT   0
+#define XQSPIPSU_QSPIDMA_DST_ADDR_MSB_WIDTH   12
+#define XQSPIPSU_QSPIDMA_DST_ADDR_MSB_MASK    0X00000FFFU
+
+/**
+ * Register: XQSPIPSU_QSPIDMA_FUTURE_ECO
+ */
+#define XQSPIPSU_QSPIDMA_FUTURE_ECO_OFFSET    0X00000EFCU
+
+#define XQSPIPSU_QSPIDMA_FUTURE_ECO_VAL_SHIFT   0
+#define XQSPIPSU_QSPIDMA_FUTURE_ECO_VAL_WIDTH   32
+#define XQSPIPSU_QSPIDMA_FUTURE_ECO_VAL_MASK    0XFFFFFFFFU
+
+/*
+ * Generic FIFO masks
+ */
+#define XQSPIPSU_GENFIFO_IMM_DATA_MASK	0xFFU
+#define XQSPIPSU_GENFIFO_DATA_XFER	0x100U
+#define XQSPIPSU_GENFIFO_EXP		0x200U
+#define XQSPIPSU_GENFIFO_MODE_SPI	0x400U
+#define XQSPIPSU_GENFIFO_MODE_DUALSPI	0x800U
+#define XQSPIPSU_GENFIFO_MODE_QUADSPI	0xC00U
+#define XQSPIPSU_GENFIFO_MODE_MASK	0xC00U	/* And with ~MASK first */
+#define XQSPIPSU_GENFIFO_CS_LOWER	0x1000U
+#define XQSPIPSU_GENFIFO_CS_UPPER	0x2000U
+#define XQSPIPSU_GENFIFO_BUS_LOWER	0x4000U
+#define XQSPIPSU_GENFIFO_BUS_UPPER	0x8000U
+#define XQSPIPSU_GENFIFO_BUS_BOTH	0xC000U	/* inverse is no bus */
+#define XQSPIPSU_GENFIFO_BUS_MASK	0xC000U	/* And with ~MASK first */
+#define XQSPIPSU_GENFIFO_TX		0x10000U	/* inverse is zero pump */
+#define XQSPIPSU_GENFIFO_RX		0x20000U	/* inverse is RX discard */
+#define XQSPIPSU_GENFIFO_STRIPE		0x40000U
+#define XQSPIPSU_GENFIFO_POLL		0x80000U
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#define XQspiPsu_In32 Xil_In32
+#define XQspiPsu_Out32 Xil_Out32
+
+/****************************************************************************/
+/**
+* Read a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to the target register.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u32 XQspiPsu_ReadReg(u32 BaseAddress. s32 RegOffset)
+*
+******************************************************************************/
+#define XQspiPsu_ReadReg(BaseAddress, RegOffset) XQspiPsu_In32((BaseAddress) + (RegOffset))
+
+/***************************************************************************/
+/**
+* Write to a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to target register.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XQspiPsu_WriteReg(u32 BaseAddress, s32 RegOffset,
+*		u32 RegisterValue)
+*
+******************************************************************************/
+#define XQspiPsu_WriteReg(BaseAddress, RegOffset, RegisterValue) XQspiPsu_Out32((BaseAddress) + (RegOffset), (RegisterValue))
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _XQSPIPSU_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_options.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_options.c
new file mode 100644
index 000000000..97eee8cfd
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_options.c
@@ -0,0 +1,449 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xqspipsu_options.c
+* @addtogroup qspipsu_v1_0
+* @{
+*
+* This file implements funcitons to configure the QSPIPSU component,
+* specifically some optional settings, clock and flash related information.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --- -------- -----------------------------------------------
+* 1.0   hk  08/21/14 First release
+*       sk  03/13/15 Added IO mode support.
+*       sk  04/24/15 Modified the code according to MISRAC-2012.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xqspipsu.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+/*
+ * Create the table of options which are processed to get/set the device
+ * options. These options are table driven to allow easy maintenance and
+ * expansion of the options.
+ */
+typedef struct {
+	u32 Option;
+	u32 Mask;
+} OptionsMap;
+
+static OptionsMap OptionsTable[] = {
+	{XQSPIPSU_CLK_ACTIVE_LOW_OPTION, XQSPIPSU_CFG_CLK_POL_MASK},
+	{XQSPIPSU_CLK_PHASE_1_OPTION, XQSPIPSU_CFG_CLK_PHA_MASK},
+	{XQSPIPSU_MANUAL_START_OPTION, XQSPIPSU_CFG_GEN_FIFO_START_MODE_MASK},
+};
+
+#define XQSPIPSU_NUM_OPTIONS	(sizeof(OptionsTable) / sizeof(OptionsMap))
+
+/*****************************************************************************/
+/**
+*
+* This function sets the options for the QSPIPSU device driver.The options
+* control how the device behaves relative to the QSPIPSU bus. The device must be
+* idle rather than busy transferring data before setting these device options.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Options contains the specified options to be set. This is a bit
+*		mask where a 1 indicates the option should be turned ON and
+*		a 0 indicates no action. One or more bit values may be
+*		contained in the mask. See the bit definitions named
+*		XQSPIPSU_*_OPTIONS in the file xqspipsu.h.
+*
+* @return
+*		- XST_SUCCESS if options are successfully set.
+*		- XST_DEVICE_BUSY if the device is currently transferring data.
+*		The transfer must complete or be aborted before setting options.
+*
+* @note
+* This function is not thread-safe.
+*
+******************************************************************************/
+s32 XQspiPsu_SetOptions(XQspiPsu *InstancePtr, u32 Options)
+{
+	u32 ConfigReg;
+	u32 Index;
+	u32 QspiPsuOptions;
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Do not allow to modify the Control Register while a transfer is in
+	 * progress. Not thread-safe.
+	 */
+	if (InstancePtr->IsBusy == TRUE) {
+		Status = (s32)XST_DEVICE_BUSY;
+	} else {
+
+		ConfigReg = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+					      XQSPIPSU_CFG_OFFSET);
+
+		/*
+		 * Loop through the options table, turning the option on
+		 * depending on whether the bit is set in the incoming options flag.
+		 */
+		for (Index = 0U; Index < XQSPIPSU_NUM_OPTIONS; Index++) {
+			if ((Options & OptionsTable[Index].Option) != FALSE) {
+				/* Turn it on */
+				ConfigReg |= OptionsTable[Index].Mask;
+			}
+		}
+
+		/*
+		 * Now write the control register. Leave it to the upper layers
+		 * to restart the device.
+		 */
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress, XQSPIPSU_CFG_OFFSET,
+				 ConfigReg);
+
+		if ((Options & XQSPIPSU_MANUAL_START_OPTION) != FALSE) {
+			InstancePtr->IsManualstart = TRUE;
+		}
+
+		Status = XST_SUCCESS;
+	}
+
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function resets the options for the QSPIPSU device driver.The options
+* control how the device behaves relative to the QSPIPSU bus. The device must be
+* idle rather than busy transferring data before setting these device options.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Options contains the specified options to be set. This is a bit
+*		mask where a 1 indicates the option should be turned OFF and
+*		a 0 indicates no action. One or more bit values may be
+*		contained in the mask. See the bit definitions named
+*		XQSPIPSU_*_OPTIONS in the file xqspipsu.h.
+*
+* @return
+*		- XST_SUCCESS if options are successfully set.
+*		- XST_DEVICE_BUSY if the device is currently transferring data.
+*		The transfer must complete or be aborted before setting options.
+*
+* @note
+* This function is not thread-safe.
+*
+******************************************************************************/
+s32 XQspiPsu_ClearOptions(XQspiPsu *InstancePtr, u32 Options)
+{
+	u32 ConfigReg;
+	u32 Index;
+	u32 QspiPsuOptions;
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Do not allow to modify the Control Register while a transfer is in
+	 * progress. Not thread-safe.
+	 */
+	if (InstancePtr->IsBusy == TRUE) {
+		Status = (s32)XST_DEVICE_BUSY;
+	} else {
+
+		ConfigReg = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+					      XQSPIPSU_CFG_OFFSET);
+
+		/*
+		 * Loop through the options table, turning the option on
+		 * depending on whether the bit is set in the incoming options flag.
+		 */
+		for (Index = 0U; Index < XQSPIPSU_NUM_OPTIONS; Index++) {
+			if ((Options & OptionsTable[Index].Option) != FALSE) {
+				/* Turn it off */
+				ConfigReg &= ~OptionsTable[Index].Mask;
+			}
+		}
+
+		/*
+		 * Now write the control register. Leave it to the upper layers
+		 * to restart the device.
+		 */
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress, XQSPIPSU_CFG_OFFSET,
+				 ConfigReg);
+
+		if ((Options & XQSPIPSU_MANUAL_START_OPTION) != FALSE) {
+			InstancePtr->IsManualstart = FALSE;
+		}
+
+		Status = XST_SUCCESS;
+	}
+
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function gets the options for the QSPIPSU device. The options control how
+* the device behaves relative to the QSPIPSU bus.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+*
+* @return
+*
+* Options contains the specified options currently set. This is a bit value
+* where a 1 means the option is on, and a 0 means the option is off.
+* See the bit definitions named XQSPIPSU_*_OPTIONS in file xqspipsu.h.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 XQspiPsu_GetOptions(XQspiPsu *InstancePtr)
+{
+	u32 OptionsFlag = 0;
+	u32 ConfigReg;
+	u32 Index;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Get the current options from QSPIPSU configuration register.
+	 */
+	ConfigReg = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+				      XQSPIPSU_CFG_OFFSET);
+
+	/* Loop through the options table to grab options */
+	for (Index = 0U; Index < XQSPIPSU_NUM_OPTIONS; Index++) {
+		if ((ConfigReg & OptionsTable[Index].Mask) != FALSE) {
+			OptionsFlag |= OptionsTable[Index].Option;
+		}
+	}
+
+	return OptionsFlag;
+}
+
+/*****************************************************************************/
+/**
+*
+* Configures the clock according to the prescaler passed.
+*
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Prescaler - clock prescaler to be set.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_DEVICE_IS_STARTED if the device is already started.
+*		It must be stopped to re-initialize.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XQspiPsu_SetClkPrescaler(XQspiPsu *InstancePtr, u8 Prescaler)
+{
+	u32 ConfigReg;
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Prescaler <= XQSPIPSU_CR_PRESC_MAXIMUM);
+
+	/*
+	 * Do not allow the slave select to change while a transfer is in
+	 * progress. Not thread-safe.
+	 */
+	if (InstancePtr->IsBusy == TRUE) {
+		Status = (s32)XST_DEVICE_BUSY;
+	} else {
+
+		/*
+		 * Read the configuration register, mask out the relevant bits, and set
+		 * them with the shifted value passed into the function. Write the
+		 * results back to the configuration register.
+		 */
+		ConfigReg = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+					      XQSPIPSU_CFG_OFFSET);
+
+		ConfigReg &= (u32)(~XQSPIPSU_CFG_BAUD_RATE_DIV_MASK);
+		ConfigReg |= (u32) ((u32)Prescaler & (u32)XQSPIPSU_CR_PRESC_MAXIMUM) <<
+				    XQSPIPSU_CFG_BAUD_RATE_DIV_SHIFT;
+
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress,
+				  XQSPIPSU_CFG_OFFSET, ConfigReg);
+
+		Status = XST_SUCCESS;
+	}
+
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This funciton should be used to tell the QSPIPSU driver the HW flash
+* configuration being used. This API should be called atleast once in the
+* application. If desired, it can be called multiple times when switching
+* between communicating to different flahs devices/using different configs.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	FlashCS - Flash Chip Select.
+* @param	FlashBus - Flash Bus (Upper, Lower or Both).
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_DEVICE_IS_STARTED if the device is already started.
+*		It must be stopped to re-initialize.
+*
+* @note		If this funciton is not called atleast once in the application,
+*		the driver assumes there is a single flash connected to the
+*		lower bus and CS line.
+*
+******************************************************************************/
+void XQspiPsu_SelectFlash(XQspiPsu *InstancePtr, u8 FlashCS, u8 FlashBus)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	/*
+	 * Bus and CS lines selected here will be updated in the instance and
+	 * used for subsequent GENFIFO entries during transfer.
+	 */
+
+	/* Choose slave select line */
+	switch (FlashCS) {
+		case XQSPIPSU_SELECT_FLASH_CS_BOTH:
+			InstancePtr->GenFifoCS = (u32)XQSPIPSU_GENFIFO_CS_LOWER |
+						(u32)XQSPIPSU_GENFIFO_CS_UPPER;
+			break;
+		case XQSPIPSU_SELECT_FLASH_CS_UPPER:
+			InstancePtr->GenFifoCS = XQSPIPSU_GENFIFO_CS_UPPER;
+			break;
+		case XQSPIPSU_SELECT_FLASH_CS_LOWER:
+			InstancePtr->GenFifoCS = XQSPIPSU_GENFIFO_CS_LOWER;
+			break;
+		default:
+			InstancePtr->GenFifoCS = XQSPIPSU_GENFIFO_CS_LOWER;
+			break;
+	}
+
+	/* Choose bus */
+	switch (FlashBus) {
+		case XQSPIPSU_SELECT_FLASH_BUS_BOTH:
+			InstancePtr->GenFifoBus = (u32)XQSPIPSU_GENFIFO_BUS_LOWER |
+						(u32)XQSPIPSU_GENFIFO_BUS_UPPER;
+			break;
+		case XQSPIPSU_SELECT_FLASH_BUS_UPPER:
+			InstancePtr->GenFifoBus = XQSPIPSU_GENFIFO_BUS_UPPER;
+			break;
+		case XQSPIPSU_SELECT_FLASH_BUS_LOWER:
+			InstancePtr->GenFifoBus = XQSPIPSU_GENFIFO_BUS_LOWER;
+			break;
+		default:
+			InstancePtr->GenFifoBus = XQSPIPSU_GENFIFO_BUS_LOWER;
+			break;
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the Read mode for the QSPIPSU device driver.The device
+* must be idle rather than busy transferring data before setting Read mode
+* options.
+*
+* @param	InstancePtr is a pointer to the XQspiPsu instance.
+* @param	Mode contains the specified Mode to be set. See the
+* 		bit definitions named XQSPIPSU_READMODE_* in the file xqspipsu.h.
+*
+* @return
+*		- XST_SUCCESS if options are successfully set.
+*		- XST_DEVICE_BUSY if the device is currently transferring data.
+*		The transfer must complete or be aborted before setting Mode.
+*
+* @note
+* This function is not thread-safe.
+*
+******************************************************************************/
+s32 XQspiPsu_SetReadMode(XQspiPsu *InstancePtr, u32 Mode)
+{
+	u32 ConfigReg;
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Do not allow to modify the Control Register while a transfer is in
+	 * progress. Not thread-safe.
+	 */
+	if (InstancePtr->IsBusy == TRUE) {
+		Status = (s32)XST_DEVICE_BUSY;
+	} else {
+
+		InstancePtr->ReadMode = Mode;
+
+		ConfigReg = XQspiPsu_ReadReg(InstancePtr->Config.BaseAddress,
+					      XQSPIPSU_CFG_OFFSET);
+
+		if (Mode == XQSPIPSU_READMODE_DMA) {
+			ConfigReg &= ~XQSPIPSU_CFG_MODE_EN_MASK;
+			ConfigReg |= XQSPIPSU_CFG_MODE_EN_DMA_MASK;
+		} else {
+			ConfigReg &= ~XQSPIPSU_CFG_MODE_EN_MASK;
+		}
+
+		XQspiPsu_WriteReg(InstancePtr->Config.BaseAddress, XQSPIPSU_CFG_OFFSET,
+				 ConfigReg);
+
+		Status = XST_SUCCESS;
+	}
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_sinit.c
new file mode 100644
index 000000000..63aaed0bb
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/qspipsu_v1_0/src/xqspipsu_sinit.c
@@ -0,0 +1,100 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xqspipsu_sinit.c
+* @addtogroup qspipsu_v1_0
+* @{
+*
+* The implementation of the XQspiPsu component's static initialization
+* functionality.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who Date     Changes
+* ----- --- -------- -----------------------------------------------
+* 1.0   hk  08/21/14 First release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xqspipsu.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+extern XQspiPsu_Config XQspiPsu_ConfigTable[XPAR_XQSPIPSU_NUM_INSTANCES];
+
+/*****************************************************************************/
+/**
+*
+* Looks up the device configuration based on the unique device ID. A table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId contains the ID of the device to look up the
+*		configuration for.
+*
+* @return
+*
+* A pointer to the configuration found or NULL if the specified device ID was
+* not found. See xqspipsu.h for the definition of XQspiPsu_Config.
+*
+* @note		None.
+*
+******************************************************************************/
+XQspiPsu_Config *XQspiPsu_LookupConfig(u16 DeviceId)
+{
+	XQspiPsu_Config *CfgPtr = NULL;
+	s32 Index;
+
+	for (Index = 0; Index < XPAR_XQSPIPSU_NUM_INSTANCES; Index++) {
+		if (XQspiPsu_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XQspiPsu_ConfigTable[Index];
+			break;
+		}
+	}
+	return (XQspiPsu_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/Makefile
new file mode 100644
index 000000000..dc8cbdf6b
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xrtcpsu_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling rtcpsu"
+
+xrtcpsu_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xrtcpsu_includes
+
+xrtcpsu_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu.c
new file mode 100644
index 000000000..58163eb34
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu.c
@@ -0,0 +1,422 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xrtcpsu.c
+* @addtogroup rtcpsu_v1_0
+* @{
+*
+* Functions in this file are the minimum required functions for the XRtcPsu
+* driver. See xrtcpsu.h for a detailed description of the driver.
+*
+* @note 	None.
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00  kvn    04/21/15 First release
+* 1.1   kvn    09/25/15 Modify control register to enable battery
+*                       switching when vcc_psaux is not available.
+* 1.2          02/15/16 Corrected Calibration mask and Fractional
+*                       mask in CalculateCalibration API.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xrtcpsu.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+static const u32 DaysInMonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
+
+/************************** Function Prototypes ******************************/
+
+static void XRtcPsu_StubHandler(void *CallBackRef, u32 Event);
+
+/*****************************************************************************/
+/*
+*
+* This function initializes a XRtcPsu instance/driver.
+*
+* The initialization entails:
+* - Initialize all members of the XRtcPsu structure.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+* @param	ConfigPtr points to the XRtcPsu device configuration structure.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. If the address translation is not used then the
+*		physical address is passed.
+*		Unexpected errors may occur if the address mapping is changed
+*		after this function is invoked.
+*
+* @return	XST_SUCCESS always.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XRtcPsu_CfgInitialize(XRtcPsu *InstancePtr, XRtcPsu_Config *ConfigPtr,
+				u32 EffectiveAddr)
+{
+	s32 Status;
+	u32 ControlRegister;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+
+	/*
+	 * Set some default values for instance data, don't indicate the device
+	 * is ready to use until everything has been initialized successfully.
+	 */
+	InstancePtr->IsReady = 0U;
+	InstancePtr->RtcConfig.BaseAddr = EffectiveAddr;
+	InstancePtr->RtcConfig.DeviceId = ConfigPtr->DeviceId;
+
+	if(InstancePtr->OscillatorFreq == 0U) {
+		InstancePtr->CalibrationValue = XRTC_CALIBRATION_VALUE;
+		InstancePtr->OscillatorFreq = XRTC_TYPICAL_OSC_FREQ;
+	}
+
+	/* Set all handlers to stub values, let user configure this data later. */
+	InstancePtr->Handler = XRtcPsu_StubHandler;
+
+	InstancePtr->IsPeriodicAlarm = 0U;
+
+	/* Set the calibration value in calibration register. */
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr + XRTC_CALIB_WR_OFFSET,
+				InstancePtr->CalibrationValue);
+
+	/* Set the Oscillator crystal and Battery switch enable in control register. */
+	ControlRegister = XRtcPsu_ReadReg(InstancePtr->RtcConfig.BaseAddr + XRTC_CTL_OFFSET);
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr + XRTC_CTL_OFFSET,
+			(ControlRegister | (u32)XRTCPSU_CRYSTAL_OSC_EN | (u32)XRTC_CTL_BATTERY_EN_MASK));
+
+	/* Clear the Interrupt Status and Disable the interrupts. */
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr + XRTC_INT_STS_OFFSET,
+			((u32)XRTC_INT_STS_ALRM_MASK | (u32)XRTC_INT_STS_SECS_MASK));
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr + XRTC_INT_DIS_OFFSET,
+			((u32)XRTC_INT_DIS_ALRM_MASK | (u32)XRTC_INT_DIS_SECS_MASK));
+
+	/* Indicate the component is now ready to use. */
+	InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+
+	Status = XST_SUCCESS;
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function is a stub handler that is the default handler such that if the
+* application has not set the handler when interrupts are enabled, this
+* function will be called.
+*
+* @param	CallBackRef is unused by this function.
+* @param	Event is unused by this function.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void XRtcPsu_StubHandler(void *CallBackRef, u32 Event)
+{
+	(void *) CallBackRef;
+	(void) Event;
+	/* Assert occurs always since this is a stub and should never be called */
+	Xil_AssertVoidAlways();
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the alarm value of RTC device.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance
+* @param	Alarm is the desired alarm time for RTC.
+* @param	Periodic says whether the alarm need to set at periodic
+* 			Intervals or a one-time alarm.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XRtcPsu_SetAlarm(XRtcPsu *InstancePtr, u32 Alarm, u32 Periodic)
+{
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Alarm != 0U);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((Alarm - XRtcPsu_GetCurrentTime(InstancePtr)) > (u32)0);
+
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr+XRTC_ALRM_OFFSET, Alarm);
+	if(Periodic != 0U) {
+		InstancePtr->IsPeriodicAlarm = 1U;
+		InstancePtr->PeriodicAlarmTime =
+				Alarm - XRtcPsu_GetCurrentTime(InstancePtr);
+	}
+}
+
+
+/****************************************************************************/
+/**
+*
+* This function translates time in seconds to a YEAR:MON:DAY HR:MIN:SEC
+* format and saves it in the DT structure variable. It also reports the weekday.
+*
+* @param	Seconds is the time value that has to be shown in DateTime
+* 			format.
+* @param	dt is the DateTime format variable that stores the translated
+* 			time.
+*
+* @return	None.
+*
+* @note		This API supports this century i.e., 2000 - 2099 years only.
+*
+*****************************************************************************/
+void XRtcPsu_SecToDateTime(u32 Seconds, XRtcPsu_DT *dt)
+{
+	u32 CurrentTime, TempDays, Leap, DaysPerMonth;
+
+	CurrentTime = Seconds;
+	dt->Sec = CurrentTime % 60U;
+	CurrentTime /= 60U;
+	dt->Min = CurrentTime % 60U;
+	CurrentTime /= 60U;
+	dt->Hour = CurrentTime % 24U;
+	TempDays = CurrentTime / 24U;
+
+	if (TempDays == 0U) {
+		TempDays = 1U;
+	}
+	dt->WeekDay = TempDays % 7U;
+
+	for (dt->Year = 0U; dt->Year <= 99U; ++(dt->Year)) {
+		if ((dt->Year % 4U) == 0U ) {
+			Leap = 1U;
+		}
+		else {
+			Leap = 0U;
+		}
+		if (TempDays < (365U + Leap)) {
+			break;
+		}
+		TempDays -= (365U + Leap);
+	}
+
+	for (dt->Month = 1U; dt->Month >= 1U; ++(dt->Month)) {
+		DaysPerMonth = DaysInMonth[dt->Month - 1];
+		if ((Leap == 1U) && (dt->Month == 2U)) {
+			DaysPerMonth++;
+		}
+		if (TempDays < DaysPerMonth) {
+			break;
+		}
+		TempDays -= DaysPerMonth;
+	}
+
+	dt->Day = TempDays;
+	dt->Year += 2000U;
+}
+
+/****************************************************************************/
+/**
+*
+* This function translates time in YEAR:MON:DAY HR:MIN:SEC format to
+* seconds.
+*
+* @param	dt is a pointer to a DatetTime format structure variable
+* 			of time that has to be shown in seconds.
+*
+* @return	Seconds value of provided in dt time.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XRtcPsu_DateTimeToSec(XRtcPsu_DT *dt)
+{
+	u32 i, Days;
+	u32 Seconds;
+	Xil_AssertNonvoid(dt != NULL);
+
+	if (dt->Year >= 2000U) {
+		dt->Year -= 2000U;
+	}
+
+	for (i = 1U; i < dt->Month; i++) {
+		dt->Day += (u32)DaysInMonth[i-1];
+	}
+
+	if ((dt->Month > 2U) && ((dt->Year % 4U) == 0U)) {
+		dt->Day++;
+	}
+	Days = dt->Day + (365U * dt->Year) + ((dt->Year + 3U) / 4U);
+	Seconds = (((((Days * 24U) + dt->Hour) * 60U) + dt->Min) * 60U) + dt->Sec;
+	return Seconds;
+}
+
+/****************************************************************************/
+/**
+*
+* This function calculates the calibration value depending on the actual
+* realworld time and also helps in deriving new calibration value if
+* the user wishes to change his oscillator frequency.TimeReal is generally the
+* internet time with EPOCH time as reference i.e.,1/1/1970 1st second.
+* But this RTC driver assumes start time from 1/1/2000 1st second. Hence,if
+* the user maps the internet time InternetTimeInSecs, then he has to use
+* 	XRtcPsu_SecToDateTime(InternetTimeInSecs,&InternetTime),
+* 	TimeReal = XRtcPsu_DateTimeToSec(InternetTime)
+* 	consecutively to arrive at TimeReal value.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+* @param	TimeReal is the actual realworld time generally an
+* 		network time / Internet time in seconds.
+*
+* @param	CrystalOscFreq is the Oscillator new frequency. Say, If the user
+* 		is going with the typical 32768Hz, then he inputs the same
+* 		frequency value.
+*
+* @return	None.
+*
+* @note		After Calculating the calibration register, user / application has to
+* 			call again CfgInitialize API to bring the new calibration into effect.
+*
+*****************************************************************************/
+void XRtcPsu_CalculateCalibration(XRtcPsu *InstancePtr,u32 TimeReal,
+		u32 CrystalOscFreq)
+{
+	u32 ReadTime, SetTime;
+	u32 Cprev,Fprev,Cnew,Fnew,Xf,Calibration;
+	Xil_AssertVoid(TimeReal != 0U);
+	Xil_AssertVoid(CrystalOscFreq != 0U);
+
+	ReadTime = XRtcPsu_GetCurrentTime(InstancePtr);
+	SetTime = XRtcPsu_GetLastSetTime(InstancePtr);
+	Calibration = XRtcPsu_GetCalibration(InstancePtr);
+	/*
+	 * When board gets reseted, Calibration value is zero
+	 * and Last setTime will be marked as 1st  second. This implies
+	 * CurrentTime to be in few seconds say something in tens. TimeReal will
+	 * be huge, say something in thousands. So to prevent such reset case, Cnew
+	 * and Fnew will not be calculated.
+	 */
+	if((Calibration == 0U) || (CrystalOscFreq != InstancePtr->OscillatorFreq)) {
+		Cnew = CrystalOscFreq - (u32)1;
+		Fnew = 0U;
+	} else {
+		Cprev = Calibration & XRTC_CALIB_RD_MAX_TCK_MASK;
+		Fprev = Calibration & XRTC_CALIB_RD_FRACTN_DATA_MASK;
+
+		Xf = ((ReadTime - SetTime) * ((Cprev+1U) + ((Fprev+1U)/16U))) / (TimeReal - SetTime);
+		Cnew = (u32)(Xf) - (u32)1;
+		Fnew = XRtcPsu_RoundOff((Xf - Cnew) * 16U) - (u32)1;
+	}
+
+	Calibration = (Fnew << XRTC_CALIB_RD_FRACTN_DATA_SHIFT) + Cnew;
+	Calibration |= XRTC_CALIB_RD_FRACTN_EN_MASK;
+
+	InstancePtr->CalibrationValue = Calibration;
+	InstancePtr->OscillatorFreq = CrystalOscFreq;
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the seconds event status by reading
+* interrupt status register.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+*
+* @return	Returns 1 if a new second event is generated.Else 0..
+*
+* @note		This API is used in polled mode operation of RTC.
+* 			This also clears interrupt status seconds bit.
+*
+*****************************************************************************/
+u32 XRtcPsu_IsSecondsEventGenerated(XRtcPsu *InstancePtr)
+{
+	u32 Status;
+
+	/* Loop the interrupt status register for Seconds Event */
+	if ((XRtcPsu_ReadReg(InstancePtr->RtcConfig.BaseAddr +
+			XRTC_INT_STS_OFFSET) & (XRTC_INT_STS_SECS_MASK)) == 0U) {
+		Status = 0U;
+	} else {
+		/* Clear the interrupt status register */
+		XRtcPsu_WriteReg((InstancePtr)->RtcConfig.BaseAddr +
+				XRTC_INT_STS_OFFSET, XRTC_INT_STS_SECS_MASK);
+		Status = 1U;
+	}
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the alarm event status by reading
+* interrupt status register.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+*
+* @return	Returns 1 if the alarm event is generated.Else 0.
+*
+* @note		This API is used in polled mode operation of RTC.
+* 			This also clears interrupt status alarm bit.
+*
+*****************************************************************************/
+u32 XRtcPsu_IsAlarmEventGenerated(XRtcPsu *InstancePtr)
+{
+	u32 Status;
+
+	/* Loop the interrupt status register for Alarm Event */
+	if ((XRtcPsu_ReadReg(InstancePtr->RtcConfig.BaseAddr +
+			XRTC_INT_STS_OFFSET) & (XRTC_INT_STS_ALRM_MASK)) == 0U) {
+		Status = 0U;
+	} else {
+		/* Clear the interrupt status register */
+		XRtcPsu_WriteReg((InstancePtr)->RtcConfig.BaseAddr +
+				XRTC_INT_STS_OFFSET, XRTC_INT_STS_ALRM_MASK);
+		Status = 1U;
+	}
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu.h
new file mode 100644
index 000000000..98e668911
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu.h
@@ -0,0 +1,387 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xrtcpsu.h
+* @addtogroup rtcpsu_v1_0
+* @{
+* @details
+*
+* The Xilinx RTC driver component.  This component supports the Xilinx
+* RTC Controller. RTC Core and RTC controller are the two main important sub-
+* components for this RTC module. RTC core can run even in the battery powered
+* domain when the power from auxiliary source is down. Because of this, RTC core
+* latches the calibration,programmed time. This core interfaces with the crystal
+* oscillator and maintains current time in seconds.Calibration circuitry
+* calculates a second with maximum 1 PPM inaccuracy using a crystal oscillator
+* with arbitrary static inaccuracy. Core also responsible to maintain control
+* value used by the oscillator and power switching circuitry.
+*
+* RTC controller includes an APB interface responsible for register access with
+* in controller and core. It contains alarm generation logic including the alarm
+* register to hold alarm time in seconds.Interrupt management using Interrupt
+* status, Interrupt mask, Interrupt enable, Interrupt disable registers are
+* included to manage alarm and seconds interrupts. Address Slave error interrupts
+* are not being handled by this driver component.
+*
+* This driver supports the following features:
+* - Setting the RTC time.
+* - Setting the Alarm value that can be one-time alarm or a periodic alarm.
+* - Modifying the calibration value.
+*
+* Initialization & Configuration
+*
+* The XRtcPsu_Config structure is used by the driver to configure itself.
+* Fields inside this structure are properties of XRtcPsu based on its hardware
+* build.
+*
+* To support multiple runtime loading and initialization strategies employed
+* by various operating systems, the driver instance can be initialized in the
+* following way:
+*
+*   - XRtcPsu_CfgInitialize(InstancePtr, CfgPtr, EffectiveAddr) - Uses a
+*	 configuration structure provided by the caller. If running in a system
+*	 with address translation, the parameter EffectiveAddr should be the
+* 	  virtual address.
+*
+* Interrupts
+*
+* The driver defaults to no interrupts at initialization such that interrupts
+* must be enabled if desired. An interrupt is generated for one of the
+* following conditions.
+*
+* - Alarm is generated.
+* - A new second is generated.
+*
+* The application can control which interrupts are enabled using the
+* XRtcPsu_SetInterruptMask() function.
+*
+* In order to use interrupts, it is necessary for the user to connect the
+* driver interrupt handler, XRtcPsu_InterruptHandler(), to the interrupt
+* system of the application. A separate handler should be provided by the
+* application to communicate with the interrupt system, and conduct
+* application specific interrupt handling. An application registers its own
+* handler through the XRtcPsu_SetHandler() function.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00  kvn    04/21/15 First release
+* 1.1   kvn    09/25/15 Modify control register to enable battery
+*                       switching when vcc_psaux is not available.
+* 

+*
+******************************************************************************/
+
+
+#ifndef XRTC_H_			/* prevent circular inclusions */
+#define XRTC_H_			/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+#include "xrtcpsu_hw.h"
+#include "xil_types.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Callback events
+ *
+ * These constants specify the handler events that an application can handle
+ * using its specific handler function. Note that these constants are not bit
+ * mask, so only one event can be passed to an application at a time.
+ *
+ * @{
+ */
+#define XRTCPSU_EVENT_ALARM_GEN		1U /**< Alarm generated event */
+#define XRTCPSU_EVENT_SECS_GEN		2U /**< A new second generated event */
+/*@}*/
+
+#define XRTCPSU_CRYSTAL_OSC_EN		(u32)1 << XRTC_CTL_OSC_SHIFT
+/**< Separate Mask for Crystal oscillator bit Enable */
+
+/**************************** Type Definitions *******************************/
+
+/******************************************************************************/
+/**
+ * This data type defines a handler that an application defines to communicate
+ * with interrupt system to retrieve state information about an application.
+ *
+ * @param	CallBackRef is a callback reference passed in by the upper layer
+ *		when setting the handler, and is passed back to the upper layer
+ *		when the handler is called. It is used to find the device driver
+ *		instance.
+ * @param	Event contains one of the event constants indicating events that
+ *		have occurred.
+ * @param	EventData contains the number of bytes sent or received at the
+ *		time of the call for send and receive events and contains the
+ *		modem status for modem events.
+ *
+ ******************************************************************************/
+typedef void (*XRtcPsu_Handler) (void *CallBackRef, u32 Event);
+
+/**
+ * This typedef contains configuration information for a device.
+ */
+typedef struct {
+	u16 DeviceId;		/**< Unique ID of device */
+	u32 BaseAddr;		/**< Register base address */
+} XRtcPsu_Config;
+
+/**
+ * The XRtcPsu driver instance data. The user is required to allocate a
+ * variable of this type for the RTC device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+	XRtcPsu_Config RtcConfig; 	/**< Device configuration */
+	u32 IsReady;				/**< Device is initialized and ready */
+	u32 PeriodicAlarmTime;
+	u8 IsPeriodicAlarm;
+	u32 OscillatorFreq;
+	u32 CalibrationValue;
+	XRtcPsu_Handler Handler;
+	void *CallBackRef;			/**< Callback reference for event handler */
+} XRtcPsu;
+
+/**
+ * This typedef contains DateTime format structure.
+ */
+typedef struct {
+	u32 Year;
+	u32 Month;
+	u32 Day;
+	u32 Hour;
+	u32 Min;
+	u32 Sec;
+	u32 WeekDay;
+} XRtcPsu_DT;
+
+
+/************************* Variable Definitions ******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#define XRTC_CALIBRATION_VALUE 0x00198231U
+#define XRTC_TYPICAL_OSC_FREQ 33330U
+
+/****************************************************************************/
+/**
+*
+* This macro updates the current time of RTC device.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+* @param	Time is the desired time for RTC in seconds.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+* 		void XRtcPsu_SetTime(XRtcPsu *InstancePtr, u32 Time)
+*
+*****************************************************************************/
+#define XRtcPsu_SetTime(InstancePtr,Time) \
+	XRtcPsu_WriteReg(((InstancePtr)->RtcConfig.BaseAddr + \
+				XRTC_SET_TIME_WR_OFFSET),(Time))
+
+/****************************************************************************/
+/**
+*
+* This macro returns the last set time of RTC device. Whenever a reset
+* happens, the last set time will be zeroth day first sec.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+*
+* @return	The last set time in seconds.
+*
+* @note		C-Style signature:
+* 		u32 XRtcPsu_GetLastSetTime(XRtcPsu *InstancePtr)
+*
+*****************************************************************************/
+#define XRtcPsu_GetLastSetTime(InstancePtr) \
+	XRtcPsu_ReadReg((InstancePtr)->RtcConfig.BaseAddr + XRTC_SET_TIME_RD_OFFSET)
+
+/****************************************************************************/
+/**
+*
+* This macro returns the calibration value of RTC device.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+*
+* @return	Calibration value for RTC.
+*
+* @note		C-Style signature:
+* 		u32 XRtcPsu_GetCalibration(XRtcPsu *InstancePtr)
+*
+*****************************************************************************/
+#define XRtcPsu_GetCalibration(InstancePtr) \
+	XRtcPsu_ReadReg((InstancePtr)->RtcConfig.BaseAddr+XRTC_CALIB_RD_OFFSET)
+
+/****************************************************************************/
+/**
+*
+* This macro returns the current time of RTC device.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+*
+* @return	Current Time. This current time will be in seconds.
+*
+* @note		C-Style signature:
+* 		u32 XRtcPsu_GetCurrentTime(XRtcPsu *InstancePtr)
+*
+*****************************************************************************/
+#define XRtcPsu_GetCurrentTime(InstancePtr) \
+	XRtcPsu_ReadReg((InstancePtr)->RtcConfig.BaseAddr+XRTC_CUR_TIME_OFFSET)
+
+/****************************************************************************/
+/**
+*
+* This macro sets the control register value of RTC device.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+* @param	Value is the desired control register value for RTC.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+* 		void XRtcPsu_SetControlRegister(XRtcPsu *InstancePtr, u32 Value)
+*
+*****************************************************************************/
+#define XRtcPsu_SetControlRegister(InstancePtr, Value) \
+	XRtcPsu_WriteReg((InstancePtr)->RtcConfig.BaseAddr + \
+			XRTC_CTL_OFFSET,(Value))
+
+/****************************************************************************/
+/**
+*
+* This macro returns the safety check register value of RTC device.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+*
+* @return	Safety check register value.
+*
+* @note		C-Style signature:
+* 		u32 XRtcPsu_GetSafetyCheck(XRtcPsu *InstancePtr)
+*
+*****************************************************************************/
+#define XRtcPsu_GetSafetyCheck(InstancePtr)	\
+	XRtcPsu_ReadReg((InstancePtr)->RtcConfig.BaseAddr+XRTC_SFTY_CHK_OFFSET)
+
+/****************************************************************************/
+/**
+*
+* This macro sets the safety check register value of RTC device.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+* @param	Value is a safety check value to be written in register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+* 		void XRtcPsu_SetSafetyCheck(XRtcPsu *InstancePtr, u32 Value)
+*
+*****************************************************************************/
+#define XRtcPsu_SetSafetyCheck(InstancePtr, Value)	\
+	XRtcPsu_WriteReg((InstancePtr)->RtcConfig.BaseAddr + \
+			XRTC_SFTY_CHK_OFFSET,(Value))
+
+/****************************************************************************/
+/**
+*
+* This macro resets the alarm register
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+* 		u32 XRtcPsu_ResetAlarm(XRtcPsu *InstancePtr)
+*
+*****************************************************************************/
+#define XRtcPsu_ResetAlarm(InstancePtr) \
+		XRtcPsu_WriteReg((InstancePtr)->RtcConfig.BaseAddr + \
+				XRTC_ALRM_OFFSET,XRTC_ALRM_RSTVAL)
+
+/****************************************************************************/
+/**
+*
+* This macro rounds off the given number
+*
+* @param	Number is the one that needs to be rounded off..
+*
+* @return	The rounded off value of the input number.
+*
+* @note		C-Style signature:
+* 		u32 XRtcPsu_RoundOff(float Number)
+*
+*****************************************************************************/
+#define XRtcPsu_RoundOff(Number) \
+	(u32)(((Number) < (u32)0) ? ((Number) - (u32)0.5) : ((Number) + (u32)0.5))
+
+/************************** Function Prototypes ******************************/
+
+/* Functions in xrtcpsu.c */
+s32 XRtcPsu_CfgInitialize(XRtcPsu *InstancePtr, XRtcPsu_Config *ConfigPtr,
+				u32 EffectiveAddr);
+
+void XRtcPsu_SetAlarm(XRtcPsu *InstancePtr, u32 Alarm, u32 Periodic);
+void XRtcPsu_SecToDateTime(u32 Seconds, XRtcPsu_DT *dt);
+u32 XRtcPsu_DateTimeToSec(XRtcPsu_DT *dt);
+void XRtcPsu_CalculateCalibration(XRtcPsu *InstancePtr,u32 TimeReal,
+		u32 CrystalOscFreq);
+u32 XRtcPsu_IsSecondsEventGenerated(XRtcPsu *InstancePtr);
+u32 XRtcPsu_IsAlarmEventGenerated(XRtcPsu *InstancePtr);
+
+/* interrupt functions in xrtcpsu_intr.c */
+void XRtcPsu_SetInterruptMask(XRtcPsu *InstancePtr, u32 Mask);
+void XRtcPsu_ClearInterruptMask(XRtcPsu *InstancePtr, u32 Mask);
+void XRtcPsu_InterruptHandler(XRtcPsu *InstancePtr);
+void XRtcPsu_SetHandler(XRtcPsu *InstancePtr, XRtcPsu_Handler FuncPtr,
+			 void *CallBackRef);
+
+/* Functions in xrtcpsu_selftest.c */
+s32 XRtcPsu_SelfTest(XRtcPsu *InstancePtr);
+
+/* Functions in xrtcpsu_sinit.c */
+XRtcPsu_Config *XRtcPsu_LookupConfig(u16 DeviceId);
+
+
+#endif /* XRTC_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_g.c
new file mode 100644
index 000000000..8dc37775a
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_g.c
@@ -0,0 +1,55 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xrtcpsu.h"
+
+/*
+* The configuration table for devices
+*/
+
+XRtcPsu_Config XRtcPsu_ConfigTable[] =
+{
+	{
+		XPAR_PSU_RTC_DEVICE_ID,
+		XPAR_PSU_RTC_BASEADDR
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_hw.h
new file mode 100644
index 000000000..532ef7e3c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_hw.h
@@ -0,0 +1,362 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xrtcpsu_hw.h
+* @addtogroup rtcpsu_v1_0
+* @{
+*
+* This header file contains the identifiers and basic driver functions (or
+* macros) that can be used to access the device. Other driver functions
+* are defined in xrtcpsu.h.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00a kvn	  04/21/15 First release
+* 1.1   kvn   09/25/15 Modify control register to enable battery
+*                      switching when vcc_psaux is not available.
+*
+* 

+*
+******************************************************************************/
+
+#ifndef XRTC_HW_H_		/* prevent circular inclusions */
+#define XRTC_HW_H_		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions *****************************/
+
+/**
+ * Xrtc Base Address
+ */
+#define XRTC_BASEADDR      0xFFA60000U
+
+/**
+ * Register: XrtcSetTimeWr
+ */
+#define XRTC_SET_TIME_WR_OFFSET    0x00000000U
+#define XRTC_SET_TIME_WR_RSTVAL   0x00000000U
+
+#define XRTC_SET_TIME_WR_VAL_SHIFT   0U
+#define XRTC_SET_TIME_WR_VAL_WIDTH   32U
+#define XRTC_SET_TIME_WR_VAL_MASK    0xffffffffU
+#define XRTC_SET_TIME_WR_VAL_DEFVAL  0x0U
+
+/**
+ * Register: XrtcSetTimeRd
+ */
+#define XRTC_SET_TIME_RD_OFFSET    0x00000004U
+#define XRTC_SET_TIME_RD_RSTVAL   0x00000000U
+
+#define XRTC_SET_TIME_RD_VAL_SHIFT   0U
+#define XRTC_SET_TIME_RD_VAL_WIDTH   32U
+#define XRTC_SET_TIME_RD_VAL_MASK    0xffffffffU
+#define XRTC_SET_TIME_RD_VAL_DEFVAL  0x0U
+
+/**
+ * Register: XrtcCalibWr
+ */
+#define XRTC_CALIB_WR_OFFSET    0x00000008U
+#define XRTC_CALIB_WR_RSTVAL   0x00000000U
+
+#define XRTC_CALIB_WR_FRACTN_EN_SHIFT   20U
+#define XRTC_CALIB_WR_FRACTN_EN_WIDTH   1U
+#define XRTC_CALIB_WR_FRACTN_EN_MASK    0x00100000U
+#define XRTC_CALIB_WR_FRACTN_EN_DEFVAL  0x0U
+
+#define XRTC_CALIB_WR_FRACTN_DATA_SHIFT   16U
+#define XRTC_CALIB_WR_FRACTN_DATA_WIDTH   4U
+#define XRTC_CALIB_WR_FRACTN_DATA_MASK    0x000f0000U
+#define XRTC_CALIB_WR_FRACTN_DATA_DEFVAL  0x0U
+
+#define XRTC_CALIB_WR_MAX_TCK_SHIFT   0U
+#define XRTC_CALIB_WR_MAX_TCK_WIDTH   16U
+#define XRTC_CALIB_WR_MAX_TCK_MASK    0x0000ffffU
+#define XRTC_CALIB_WR_MAX_TCK_DEFVAL  0x0U
+
+/**
+ * Register: XrtcCalibRd
+ */
+#define XRTC_CALIB_RD_OFFSET    0x0000000CU
+#define XRTC_CALIB_RD_RSTVAL   0x00000000U
+
+#define XRTC_CALIB_RD_FRACTN_EN_SHIFT   20U
+#define XRTC_CALIB_RD_FRACTN_EN_WIDTH   1U
+#define XRTC_CALIB_RD_FRACTN_EN_MASK    0x00100000U
+#define XRTC_CALIB_RD_FRACTN_EN_DEFVAL  0x0U
+
+#define XRTC_CALIB_RD_FRACTN_DATA_SHIFT   16U
+#define XRTC_CALIB_RD_FRACTN_DATA_WIDTH   4U
+#define XRTC_CALIB_RD_FRACTN_DATA_MASK    0x000f0000U
+#define XRTC_CALIB_RD_FRACTN_DATA_DEFVAL  0x0U
+
+#define XRTC_CALIB_RD_MAX_TCK_SHIFT   0U
+#define XRTC_CALIB_RD_MAX_TCK_WIDTH   16U
+#define XRTC_CALIB_RD_MAX_TCK_MASK    0x0000ffffU
+#define XRTC_CALIB_RD_MAX_TCK_DEFVAL  0x0U
+
+/**
+ * Register: XrtcCurTime
+ */
+#define XRTC_CUR_TIME_OFFSET    0x00000010U
+#define XRTC_CUR_TIME_RSTVAL   0x00000000U
+
+#define XRTC_CUR_TIME_VAL_SHIFT   0U
+#define XRTC_CUR_TIME_VAL_WIDTH   32U
+#define XRTC_CUR_TIME_VAL_MASK    0xffffffffU
+#define XRTC_CUR_TIME_VAL_DEFVAL  0x0U
+
+/**
+ * Register: XrtcCurTck
+ */
+#define XRTC_CUR_TCK_OFFSET    0x00000014U
+#define XRTC_CUR_TCK_RSTVAL   0x00000000U
+
+#define XRTC_CUR_TCK_VAL_SHIFT   0U
+#define XRTC_CUR_TCK_VAL_WIDTH   16U
+#define XRTC_CUR_TCK_VAL_MASK    0x0000ffffU
+#define XRTC_CUR_TCK_VAL_DEFVAL  0x0U
+
+/**
+ * Register: XrtcAlrm
+ */
+#define XRTC_ALRM_OFFSET    0x00000018U
+#define XRTC_ALRM_RSTVAL   0x00000000U
+
+#define XRTC_ALRM_VAL_SHIFT   0U
+#define XRTC_ALRM_VAL_WIDTH   32U
+#define XRTC_ALRM_VAL_MASK    0xffffffffU
+#define XRTC_ALRM_VAL_DEFVAL  0x0U
+
+/**
+ * Register: XrtcIntSts
+ */
+#define XRTC_INT_STS_OFFSET    0x00000020U
+#define XRTC_INT_STS_RSTVAL   0x00000000U
+
+#define XRTC_INT_STS_ALRM_SHIFT   1U
+#define XRTC_INT_STS_ALRM_WIDTH   1U
+#define XRTC_INT_STS_ALRM_MASK    0x00000002U
+#define XRTC_INT_STS_ALRM_DEFVAL  0x0U
+
+#define XRTC_INT_STS_SECS_SHIFT   0U
+#define XRTC_INT_STS_SECS_WIDTH   1U
+#define XRTC_INT_STS_SECS_MASK    0x00000001U
+#define XRTC_INT_STS_SECS_DEFVAL  0x0U
+
+/**
+ * Register: XrtcIntMsk
+ */
+#define XRTC_INT_MSK_OFFSET    0x00000024U
+#define XRTC_INT_MSK_RSTVAL   0x00000003U
+
+#define XRTC_INT_MSK_ALRM_SHIFT   1U
+#define XRTC_INT_MSK_ALRM_WIDTH   1U
+#define XRTC_INT_MSK_ALRM_MASK    0x00000002U
+#define XRTC_INT_MSK_ALRM_DEFVAL  0x1U
+
+#define XRTC_INT_MSK_SECS_SHIFT   0U
+#define XRTC_INT_MSK_SECS_WIDTH   1U
+#define XRTC_INT_MSK_SECS_MASK    0x00000001U
+#define XRTC_INT_MSK_SECS_DEFVAL  0x1U
+
+/**
+ * Register: XrtcIntEn
+ */
+#define XRTC_INT_EN_OFFSET    0x00000028U
+#define XRTC_INT_EN_RSTVAL   0x00000000U
+
+#define XRTC_INT_EN_ALRM_SHIFT   1U
+#define XRTC_INT_EN_ALRM_WIDTH   1U
+#define XRTC_INT_EN_ALRM_MASK    0x00000002U
+#define XRTC_INT_EN_ALRM_DEFVAL  0x0U
+
+#define XRTC_INT_EN_SECS_SHIFT   0U
+#define XRTC_INT_EN_SECS_WIDTH   1U
+#define XRTC_INT_EN_SECS_MASK    0x00000001U
+#define XRTC_INT_EN_SECS_DEFVAL  0x0U
+
+/**
+ * Register: XrtcIntDis
+ */
+#define XRTC_INT_DIS_OFFSET    0x0000002CU
+#define XRTC_INT_DIS_RSTVAL   0x00000000U
+
+#define XRTC_INT_DIS_ALRM_SHIFT   1U
+#define XRTC_INT_DIS_ALRM_WIDTH   1U
+#define XRTC_INT_DIS_ALRM_MASK    0x00000002U
+#define XRTC_INT_DIS_ALRM_DEFVAL  0x0U
+
+#define XRTC_INT_DIS_SECS_SHIFT   0U
+#define XRTC_INT_DIS_SECS_WIDTH   1U
+#define XRTC_INT_DIS_SECS_MASK    0x00000001U
+#define XRTC_INT_DIS_SECS_DEFVAL  0x0U
+
+/**
+ * Register: XrtcAddErr
+ */
+#define XRTC_ADD_ERR_OFFSET    0x00000030U
+#define XRTC_ADD_ERR_RSTVAL   0x00000000U
+
+#define XRTC_ADD_ERR_STS_SHIFT   0U
+#define XRTC_ADD_ERR_STS_WIDTH   1U
+#define XRTC_ADD_ERR_STS_MASK    0x00000001U
+#define XRTC_ADD_ERR_STS_DEFVAL  0x0U
+
+/**
+ * Register: XrtcAddErrIntMsk
+ */
+#define XRTC_ADD_ERR_INT_MSK_OFFSET    0x00000034U
+#define XRTC_ADD_ERR_INT_MSK_RSTVAL   0x00000001U
+
+#define XRTC_ADD_ERR_INT_MSK_SHIFT   0U
+#define XRTC_ADD_ERR_INT_MSK_WIDTH   1U
+#define XRTC_ADD_ERR_INT_MSK_MASK    0x00000001U
+#define XRTC_ADD_ERR_INT_MSK_DEFVAL  0x1U
+
+/**
+ * Register: XrtcAddErrIntEn
+ */
+#define XRTC_ADD_ERR_INT_EN_OFFSET    0x00000038U
+#define XRTC_ADD_ERR_INT_EN_RSTVAL   0x00000000U
+
+#define XRTC_ADD_ERR_INT_EN_MSK_SHIFT   0U
+#define XRTC_ADD_ERR_INT_EN_MSK_WIDTH   1U
+#define XRTC_ADD_ERR_INT_EN_MSK_MASK    0x00000001U
+#define XRTC_ADD_ERR_INT_EN_MSK_DEFVAL  0x0U
+
+/**
+ * Register: XrtcAddErrIntDis
+ */
+#define XRTC_ADD_ERR_INT_DIS_OFFSET    0x0000003CU
+#define XRTC_ADD_ERR_INT_DIS_RSTVAL   0x00000000U
+
+#define XRTC_ADD_ERR_INT_DIS_MSK_SHIFT   0U
+#define XRTC_ADD_ERR_INT_DIS_MSK_WIDTH   1U
+#define XRTC_ADD_ERR_INT_DIS_MSK_MASK    0x00000001U
+#define XRTC_ADD_ERR_INT_DIS_MSK_DEFVAL  0x0U
+
+/**
+ * Register: XrtcCtl
+ */
+#define XRTC_CTL_OFFSET    0x00000040U
+#define XRTC_CTL_RSTVAL   0x01000000U
+
+#define XRTC_CTL_BATTERY_EN_SHIFT   31U
+#define XRTC_CTL_BATTERY_EN_WIDTH   1U
+#define XRTC_CTL_BATTERY_EN_MASK    0x80000000U
+#define XRTC_CTL_BATTERY_EN_DEFVAL  0x0U
+
+#define XRTC_CTL_OSC_SHIFT   24U
+#define XRTC_CTL_OSC_WIDTH   4U
+#define XRTC_CTL_OSC_MASK    0x0f000000U
+#define XRTC_CTL_OSC_DEFVAL  0x1U
+
+#define XRTC_CTL_SLVERR_EN_SHIFT   0U
+#define XRTC_CTL_SLVERR_EN_WIDTH   1U
+#define XRTC_CTL_SLVERR_EN_MASK    0x00000001U
+#define XRTC_CTL_SLVERR_EN_DEFVAL  0x0U
+
+/**
+ * Register: XrtcSftyChk
+ */
+#define XRTC_SFTY_CHK_OFFSET    0x00000050U
+#define XRTC_SFTY_CHK_RSTVAL   0x00000000U
+
+#define XRTC_SFTY_CHK_REG_SHIFT   0U
+#define XRTC_SFTY_CHK_REG_WIDTH   32U
+#define XRTC_SFTY_CHK_REG_MASK    0xffffffffU
+#define XRTC_SFTY_CHK_REG_DEFVAL  0x0U
+
+/**
+ * Register: XrtcEco
+ */
+#define XRTC_ECO_OFFSET    0x00000060U
+#define XRTC_ECO_RSTVAL   0x00000000U
+
+#define XRTC_ECO_REG_SHIFT   0U
+#define XRTC_ECO_REG_WIDTH   32U
+#define XRTC_ECO_REG_MASK    0xffffffffU
+#define XRTC_ECO_REG_DEFVAL  0x0U
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* This macro reads the given register.
+*
+* @param	RegisterAddr is the register address in the address
+* 			space of the RTC device.
+*
+* @return	The 32-bit value of the register
+*
+* @note		None.
+*
+*****************************************************************************/
+#define XRtcPsu_ReadReg(RegisterAddr) Xil_In32(RegisterAddr)
+
+/****************************************************************************/
+/**
+*
+* This macro writes the given register.
+*
+* @param	RegisterAddr is the register address in the address
+* 			space of the RTC device.
+* @param	Data is the 32-bit value to write to the register.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+#define XRtcPsu_WriteReg(RegisterAddr, Data) Xil_Out32(RegisterAddr, (u32)(Data))
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* XRTC_HW_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_intr.c
new file mode 100644
index 000000000..bca20af12
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_intr.c
@@ -0,0 +1,232 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xrtcpsu_intr.c
+* @addtogroup rtcpsu_v1_0
+* @{
+*
+* This file contains functions related to RTC interrupt handling.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00  kvn    04/21/15 First release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xrtcpsu.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions ****************************/
+
+/****************************************************************************/
+/**
+*
+* This function sets the interrupt mask.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance
+* @param	Mask contains the interrupts to be enabled.
+*		A '1' enables an interupt, and a '0' disables.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XRtcPsu_SetInterruptMask(XRtcPsu *InstancePtr, u32 Mask)
+{
+	/*
+	 * Clear the Status register to be sure of no pending interrupts.
+	 * Writing mask values to interrupt bits as it is a WTC register.
+	 */
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr + XRTC_INT_STS_OFFSET,
+			((u32)XRTC_INT_STS_ALRM_MASK | (u32)XRTC_INT_STS_SECS_MASK));
+
+	/*
+	 * XRTC_INT_MSK_RSTVAL contains the valid interrupts
+	 * for the RTC device. The AND operation on Mask makes sure one
+	 * of the valid bits are only set.
+	 */
+
+	/* Write the mask to the IER Register */
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr+XRTC_INT_EN_OFFSET,
+					(Mask & (u32)XRTC_INT_MSK_RSTVAL));
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function clears the interrupt mask.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance
+* @param	Mask contains the interrupts to be disabled.
+*		A '1' enables an interrupt, and a '0' disables.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XRtcPsu_ClearInterruptMask(XRtcPsu *InstancePtr, u32 Mask)
+{
+	/*
+	 * XRTC_INT_MSK_RSTVAL contains the valid interrupts
+	 * for the RTC device. The AND operation on mask makes sure one
+	 * of the valid bits are only cleared.
+	 */
+
+	/* Write the Mask to the IDR register */
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr+XRTC_INT_DIS_OFFSET,
+					(Mask & (u32)XRTC_INT_MSK_RSTVAL));
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the handler that will be called when an event (interrupt)
+* occurs that needs application's attention.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance
+* @param	FuncPtr is the pointer to the callback function.
+* @param	CallBackRef is the upper layer callback reference passed back
+*		when the callback function is invoked.
+*
+* @return	None.
+*
+* @note
+*
+* There is no assert on the CallBackRef since the driver doesn't know what it
+* is (nor should it)
+*
+*****************************************************************************/
+void XRtcPsu_SetHandler(XRtcPsu *InstancePtr, XRtcPsu_Handler FuncPtr,
+		 void *CallBackRef)
+{
+	/*
+	 * Asserts validate the input arguments
+	 * CallBackRef not checked, no way to know what is valid
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(FuncPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	InstancePtr->Handler = FuncPtr;
+	InstancePtr->CallBackRef = CallBackRef;
+}
+
+/****************************************************************************/
+/**
+*
+* This function is the interrupt handler for the driver.
+* It must be connected to an interrupt system by the application such that it
+* can be called when an interrupt occurs.
+*
+* @param	InstancePtr contains a pointer to the driver instance
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XRtcPsu_InterruptHandler(XRtcPsu *InstancePtr)
+{
+	u32 IsrStatus;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the interrupt ID register to determine which
+	 * interrupt is active.
+	 */
+	IsrStatus = ~(XRtcPsu_ReadReg(InstancePtr->RtcConfig.BaseAddr +
+			XRTC_INT_MSK_OFFSET));
+
+	IsrStatus &= XRtcPsu_ReadReg(InstancePtr->RtcConfig.BaseAddr +
+			XRTC_INT_STS_OFFSET);
+
+	/*
+	 * Clear the interrupt status to allow future
+	 * interrupts before this generated interrupt is serviced.
+	 */
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr +
+			XRTC_INT_STS_OFFSET, IsrStatus);
+
+	/* Handle the generated interrupts appropriately. */
+
+	/* Alarm interrupt */
+	if((IsrStatus & XRTC_INT_STS_ALRM_MASK) != (u32)0) {
+
+		if(InstancePtr->IsPeriodicAlarm != 0U) {
+			XRtcPsu_SetAlarm(InstancePtr,
+					(XRtcPsu_GetCurrentTime(InstancePtr)+InstancePtr->PeriodicAlarmTime),1U);
+		}
+
+		/*
+		 * Call the application handler to indicate that there is an
+		 * alarm interrupt. If the application cares about this alarm,
+		 * it will act accordingly through its own handler.
+		 */
+		InstancePtr->Handler(InstancePtr->CallBackRef,
+					XRTCPSU_EVENT_ALARM_GEN);
+	}
+
+	/* Seconds interrupt */
+	if((IsrStatus & XRTC_INT_STS_SECS_MASK) != (u32)0) {
+		/*
+		 * Call the application handler to indicate that there is an
+		 * seconds interrupt. If the application cares about this seconds
+		 * interrupt, it will act accordingly through its own handler.
+		 */
+		InstancePtr->Handler(InstancePtr->CallBackRef,
+					XRTCPSU_EVENT_SECS_GEN);
+	}
+
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_selftest.c
new file mode 100644
index 000000000..67c562c64
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_selftest.c
@@ -0,0 +1,112 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xrtcpsu_selftest.c
+* @addtogroup rtcpsu_v1_0
+* @{
+*
+* This file contains the self-test functions for the XRtcPsu driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- -----------------------------------------------
+* 1.00  kvn    04/21/15 First release.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xrtcpsu.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/****************************************************************************/
+/**
+*
+* This function runs a self-test on the driver and hardware device. This self
+* test writes reset value into safety check register and read backs the same.
+* If mismatch offers, returns the failure.
+*
+* @param	InstancePtr is a pointer to the XRtcPsu instance
+*
+* @return
+*		 - XST_SUCCESS if the test was successful
+*
+* @note
+*
+* This function can hang if the hardware is not functioning properly.
+*
+******************************************************************************/
+s32 XRtcPsu_SelfTest(XRtcPsu *InstancePtr)
+{
+	s32 Status = XST_SUCCESS;
+	u32 SafetyCheck;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Write the reset value in safety check register and
+	 * try reading back. If mismatch happens, return failure.
+	 */
+	XRtcPsu_WriteReg(InstancePtr->RtcConfig.BaseAddr + XRTC_SFTY_CHK_OFFSET,
+			XRTC_SFTY_CHK_RSTVAL);
+	SafetyCheck = XRtcPsu_ReadReg(InstancePtr->RtcConfig.BaseAddr +
+			XRTC_SFTY_CHK_OFFSET);
+
+	if (SafetyCheck != XRTC_SFTY_CHK_RSTVAL) {
+		Status = XST_FAILURE;
+	}
+
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_sinit.c
new file mode 100644
index 000000000..d3a8b7dfc
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/rtcpsu_v1_2/src/xrtcpsu_sinit.c
@@ -0,0 +1,102 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xrtcpsu_sinit.c
+* @addtogroup rtcpsu_v1_0
+* @{
+*
+* This file contains the implementation of the XRtcPsu driver's static
+* initialization functionality.
+*
+* @note		None.
+*
+* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00  kvn    04/21/15 First release.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xrtcpsu.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+extern XRtcPsu_Config XRtcPsu_ConfigTable[];
+
+/*****************************************************************************/
+/**
+*
+* This function looks for the device configuration based on the unique device
+* ID. The table XRtcPsu_ConfigTable[] contains the configuration information for
+* each device in the system.
+*
+* @param	DeviceId is the unique device ID of the device being looked up.
+*
+* @return	A pointer to the configuration table entry corresponding to the
+*		given device ID, or NULL if no match is found.
+*
+* @note		None.
+*
+******************************************************************************/
+XRtcPsu_Config *XRtcPsu_LookupConfig(u16 DeviceId)
+{
+	XRtcPsu_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index = 0U; Index < (u32)XPAR_XRTCPSU_NUM_INSTANCES; Index++) {
+		if (XRtcPsu_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XRtcPsu_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XRtcPsu_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/Makefile
new file mode 100644
index 000000000..04867a484
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner scugic_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling scugic"
+
+scugic_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: scugic_includes
+
+scugic_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic.c
new file mode 100644
index 000000000..1806274c7
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic.c
@@ -0,0 +1,769 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xscugic.c
+* @addtogroup scugic_v3_1
+* @{
+*
+* Contains required functions for the XScuGic driver for the Interrupt
+* Controller. See xscugic.h for a detailed description of the driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- --------------------------------------------------------
+* 1.00a drg  01/19/10 First release
+* 1.01a sdm  11/09/11 Changes are made in function XScuGic_CfgInitialize. Since
+*		      "Config" entry is now made as pointer in the XScuGic
+*		      structure, necessary changes are made.
+*		      The HandlerTable can now be populated through the low
+*		      level routine XScuGic_RegisterHandler added in this
+*		      release. Hence necessary checks are added not to
+*		      overwrite the HandlerTable entriesin function
+*		      XScuGic_CfgInitialize.
+* 1.03a srt  02/27/13 Added APIs
+*			- XScuGic_SetPriTrigTypeByDistAddr()
+*			- XScuGic_GetPriTrigTypeByDistAddr()
+* 		      Removed Offset calculation macros, defined in _hw.h
+*		      (CR 702687)
+*			  Added support to direct interrupts to the appropriate CPU. Earlier
+*			  interrupts were directed to CPU1 (hard coded). Now depending
+*			  upon the CPU selected by the user (xparameters.h), interrupts
+*			  will be directed to the relevant CPU. This fixes CR 699688.
+*
+* 1.04a hk   05/04/13 Assigned EffectiveAddr to CpuBaseAddress in
+*			  XScuGic_CfgInitialize. Fix for CR#704400 to remove warnings.
+*			  Moved functions XScuGic_SetPriTrigTypeByDistAddr and
+*             XScuGic_GetPriTrigTypeByDistAddr to xscugic_hw.c.
+*			  This is fix for CR#705621.
+* 1.06a asa  16/11/13 Fix for CR#749178. Assignment for EffectiveAddr
+*			  in function XScuGic_CfgInitialize is removed as it was
+*		      a bug.
+* 3.00  kvn  02/13/14 Modified code for MISRA-C:2012 compliance.
+* 3.01	pkp	 06/19/15 Added XScuGic_InterruptMaptoCpu API for an interrupt
+*			  target CPU mapping
+* 3.02	pkp	 11/09/15 Modified DistributorInit function for AMP case to add
+*					  the current cpu to interrupt processor targets registers
+* 3.2   asa  02/29/16 Modified DistributorInit function for Zynq AMP case. The
+*			  distributor is left uninitialized for Zynq AMP. It is assumed
+*             that the distributor will be initialized by Linux master. However
+*             for CortexR5 case, the earlier code is left unchanged where the
+*             the interrupt processor target registers in the distributor is
+*             initialized with the corresponding CPU ID on which the application
+*             built over the scugic driver runs.
+*             These changes fix CR#937243.
+*
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xscugic.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+static void StubHandler(void *CallBackRef);
+
+/*****************************************************************************/
+/**
+*
+* DistributorInit initializes the distributor of the GIC. The
+* initialization entails:
+*
+* - Write the trigger mode, priority and target CPU
+* - All interrupt sources are disabled
+* - Enable the distributor
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+* @param	CpuID is the Cpu ID to be initialized.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static void DistributorInit(XScuGic *InstancePtr, u32 CpuID)
+{
+	u32 Int_Id;
+	u32 LocalCpuID = CpuID;
+
+#if USE_AMP==1
+	#warning "Building GIC for AMP"
+#ifdef ARMR5
+    u32 RegValue;
+
+	/*
+	 * The overall distributor should not be initialized in AMP case where
+	 * another CPU is taking care of it.
+	 */
+	LocalCpuID |= LocalCpuID << 8U;
+	LocalCpuID |= LocalCpuID << 16U;
+	for (Int_Id = 32U; Int_IdBaseAddress for this parameters, passing the physical
+*		address instead.
+*
+* @return
+*		- XST_SUCCESS if initialization was successful
+*
+* @note		None.
+*
+******************************************************************************/
+s32  XScuGic_CfgInitialize(XScuGic *InstancePtr,
+				XScuGic_Config *ConfigPtr,
+				u32 EffectiveAddr)
+{
+	u32 Int_Id;
+	u32 Cpu_Id = (u32)XPAR_CPU_ID + (u32)1;
+	(void) EffectiveAddr;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+
+	if(InstancePtr->IsReady != XIL_COMPONENT_IS_READY) {
+
+		InstancePtr->IsReady = 0;
+		InstancePtr->Config = ConfigPtr;
+
+
+		for (Int_Id = 0U; Int_IdConfig->HandlerTable[Int_Id].Handler == NULL)) {
+				InstancePtr->Config->HandlerTable[Int_Id].Handler =
+									StubHandler;
+			}
+			InstancePtr->Config->HandlerTable[Int_Id].CallBackRef =
+								InstancePtr;
+		}
+
+		DistributorInit(InstancePtr, Cpu_Id);
+		CPUInitialize(InstancePtr);
+
+		InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+	}
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Makes the connection between the Int_Id of the interrupt source and the
+* associated handler that is to run when the interrupt is recognized. The
+* argument provided in this call as the Callbackref is used as the argument
+* for the handler when it is called.
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+* @param	Int_Id contains the ID of the interrupt source and should be
+*		in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
+* @param	Handler to the handler for that interrupt.
+* @param	CallBackRef is the callback reference, usually the instance
+*		pointer of the connecting driver.
+*
+* @return
+*
+*		- XST_SUCCESS if the handler was connected correctly.
+*
+* @note
+*
+* WARNING: The handler provided as an argument will overwrite any handler
+* that was previously connected.
+*
+****************************************************************************/
+s32  XScuGic_Connect(XScuGic *InstancePtr, u32 Int_Id,
+                      Xil_InterruptHandler Handler, void *CallBackRef)
+{
+	/*
+	 * Assert the arguments
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertNonvoid(Handler != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * The Int_Id is used as an index into the table to select the proper
+	 * handler
+	 */
+	InstancePtr->Config->HandlerTable[Int_Id].Handler = Handler;
+	InstancePtr->Config->HandlerTable[Int_Id].CallBackRef = CallBackRef;
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Updates the interrupt table with the Null Handler and NULL arguments at the
+* location pointed at by the Int_Id. This effectively disconnects that interrupt
+* source from any handler. The interrupt is disabled also.
+*
+* @param	InstancePtr is a pointer to the XScuGic instance to be worked on.
+* @param	Int_Id contains the ID of the interrupt source and should
+*		be in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void XScuGic_Disconnect(XScuGic *InstancePtr, u32 Int_Id)
+{
+	u32 Mask;
+
+	/*
+	 * Assert the arguments
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * The Int_Id is used to create the appropriate mask for the
+	 * desired bit position. Int_Id currently limited to 0 - 31
+	 */
+	Mask = 0x00000001U << (Int_Id % 32U);
+
+	/*
+	 * Disable the interrupt such that it won't occur while disconnecting
+	 * the handler, only disable the specified interrupt id without modifying
+	 * the other interrupt ids
+	 */
+	XScuGic_DistWriteReg(InstancePtr, (u32)XSCUGIC_DISABLE_OFFSET +
+						((Int_Id / 32U) * 4U), Mask);
+
+	/*
+	 * Disconnect the handler and connect a stub, the callback reference
+	 * must be set to this instance to allow unhandled interrupts to be
+	 * tracked
+	 */
+	InstancePtr->Config->HandlerTable[Int_Id].Handler = StubHandler;
+	InstancePtr->Config->HandlerTable[Int_Id].CallBackRef = InstancePtr;
+}
+
+/*****************************************************************************/
+/**
+*
+* Enables the interrupt source provided as the argument Int_Id. Any pending
+* interrupt condition for the specified Int_Id will occur after this function is
+* called.
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+* @param	Int_Id contains the ID of the interrupt source and should be
+*		in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void XScuGic_Enable(XScuGic *InstancePtr, u32 Int_Id)
+{
+	u32 Mask;
+
+	/*
+	 * Assert the arguments
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * The Int_Id is used to create the appropriate mask for the
+	 * desired bit position. Int_Id currently limited to 0 - 31
+	 */
+	Mask = 0x00000001U << (Int_Id % 32U);
+
+	/*
+	 * Enable the selected interrupt source by setting the
+	 * corresponding bit in the Enable Set register.
+	 */
+	XScuGic_DistWriteReg(InstancePtr, (u32)XSCUGIC_ENABLE_SET_OFFSET +
+						((Int_Id / 32U) * 4U), Mask);
+}
+
+/*****************************************************************************/
+/**
+*
+* Disables the interrupt source provided as the argument Int_Id such that the
+* interrupt controller will not cause interrupts for the specified Int_Id. The
+* interrupt controller will continue to hold an interrupt condition for the
+* Int_Id, but will not cause an interrupt.
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+* @param	Int_Id contains the ID of the interrupt source and should be
+*		in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void XScuGic_Disable(XScuGic *InstancePtr, u32 Int_Id)
+{
+	u32 Mask;
+
+	/*
+	 * Assert the arguments
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * The Int_Id is used to create the appropriate mask for the
+	 * desired bit position. Int_Id currently limited to 0 - 31
+	 */
+	Mask = 0x00000001U << (Int_Id % 32U);
+
+	/*
+	 * Disable the selected interrupt source by setting the
+	 * corresponding bit in the IDR.
+	 */
+	XScuGic_DistWriteReg(InstancePtr, (u32)XSCUGIC_DISABLE_OFFSET +
+						((Int_Id / 32U) * 4U), Mask);
+}
+
+/*****************************************************************************/
+/**
+*
+* Allows software to simulate an interrupt in the interrupt controller.  This
+* function will only be successful when the interrupt controller has been
+* started in simulation mode.  A simulated interrupt allows the interrupt
+* controller to be tested without any device to drive an interrupt input
+* signal into it.
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+* @param	Int_Id is the software interrupt ID to simulate an interrupt.
+* @param	Cpu_Id is the list of CPUs to send the interrupt.
+*
+* @return
+*
+* XST_SUCCESS if successful, or XST_FAILURE if the interrupt could not be
+* simulated
+*
+* @note		None.
+*
+******************************************************************************/
+s32  XScuGic_SoftwareIntr(XScuGic *InstancePtr, u32 Int_Id, u32 Cpu_Id)
+{
+	u32 Mask;
+
+	/*
+	 * Assert the arguments
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(Int_Id <= 15U) ;
+	Xil_AssertNonvoid(Cpu_Id <= 255U) ;
+
+
+	/*
+	 * The Int_Id is used to create the appropriate mask for the
+	 * desired interrupt. Int_Id currently limited to 0 - 15
+	 * Use the target list for the Cpu ID.
+	 */
+	Mask = ((Cpu_Id << 16U) | Int_Id) &
+		(XSCUGIC_SFI_TRIG_CPU_MASK | XSCUGIC_SFI_TRIG_INTID_MASK);
+
+	/*
+	 * Write to the Software interrupt trigger register. Use the appropriate
+	 * CPU Int_Id.
+	 */
+	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_SFI_TRIG_OFFSET, Mask);
+
+	/* Indicate the interrupt was successfully simulated */
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* A stub for the asynchronous callback. The stub is here in case the upper
+* layers forget to set the handler.
+*
+* @param	CallBackRef is a pointer to the upper layer callback reference
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void StubHandler(void *CallBackRef) {
+	/*
+	 * verify that the inputs are valid
+	 */
+	Xil_AssertVoid(CallBackRef != NULL);
+
+	/*
+	 * Indicate another unhandled interrupt for stats
+	 */
+	((XScuGic *)((void *)CallBackRef))->UnhandledInterrupts++;
+}
+
+/****************************************************************************/
+/**
+* Sets the interrupt priority and trigger type for the specificd IRQ source.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Int_Id is the IRQ source number to modify
+* @param	Priority is the new priority for the IRQ source. 0 is highest
+* 			priority, 0xF8 (248) is lowest. There are 32 priority levels
+*			supported with a step of 8. Hence the supported priorities are
+*			0, 8, 16, 32, 40 ..., 248.
+* @param	Trigger is the new trigger type for the IRQ source.
+* Each bit pair describes the configuration for an INT_ID.
+* SFI    Read Only    b10 always
+* PPI    Read Only    depending on how the PPIs are configured.
+*                    b01    Active HIGH level sensitive
+*                    b11 Rising edge sensitive
+* SPI                LSB is read only.
+*                    b01    Active HIGH level sensitive
+*                    b11 Rising edge sensitive/
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XScuGic_SetPriorityTriggerType(XScuGic *InstancePtr, u32 Int_Id,
+					u8 Priority, u8 Trigger)
+{
+	u32 RegValue;
+	u8 LocalPriority;
+	LocalPriority = Priority;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertVoid(Trigger <= (u8)XSCUGIC_INT_CFG_MASK);
+	Xil_AssertVoid(LocalPriority <= (u8)XSCUGIC_MAX_INTR_PRIO_VAL);
+
+	/*
+	 * Determine the register to write to using the Int_Id.
+	 */
+	RegValue = XScuGic_DistReadReg(InstancePtr,
+			XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id));
+
+	/*
+	 * The priority bits are Bits 7 to 3 in GIC Priority Register. This
+	 * means the number of priority levels supported are 32 and they are
+	 * in steps of 8. The priorities can be 0, 8, 16, 32, 48, ... etc.
+	 * The lower order 3 bits are masked before putting it in the register.
+	 */
+	LocalPriority = LocalPriority & (u8)XSCUGIC_INTR_PRIO_MASK;
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue &= ~(XSCUGIC_PRIORITY_MASK << ((Int_Id%4U)*8U));
+	RegValue |= (u32)LocalPriority << ((Int_Id%4U)*8U);
+
+	/*
+	 * Write the value back to the register.
+	 */
+	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id),
+				RegValue);
+
+	/*
+	 * Determine the register to write to using the Int_Id.
+	 */
+	RegValue = XScuGic_DistReadReg(InstancePtr,
+			XSCUGIC_INT_CFG_OFFSET_CALC (Int_Id));
+
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue &= ~(XSCUGIC_INT_CFG_MASK << ((Int_Id%16U)*2U));
+	RegValue |= (u32)Trigger << ((Int_Id%16U)*2U);
+
+	/*
+	 * Write the value back to the register.
+	 */
+	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_INT_CFG_OFFSET_CALC(Int_Id),
+				RegValue);
+
+}
+
+/****************************************************************************/
+/**
+* Gets the interrupt priority and trigger type for the specificd IRQ source.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Int_Id is the IRQ source number to modify
+* @param	Priority is a pointer to the value of the priority of the IRQ
+*		source. This is a return value.
+* @param	Trigger is pointer to the value of the trigger of the IRQ
+*		source. This is a return value.
+*
+* @return	None.
+*
+* @note		None
+*
+*****************************************************************************/
+void XScuGic_GetPriorityTriggerType(XScuGic *InstancePtr, u32 Int_Id,
+					u8 *Priority, u8 *Trigger)
+{
+	u32 RegValue;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertVoid(Priority != NULL);
+	Xil_AssertVoid(Trigger != NULL);
+
+	/*
+	 * Determine the register to read to using the Int_Id.
+	 */
+	RegValue = XScuGic_DistReadReg(InstancePtr,
+	    XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id));
+
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue = RegValue >> ((Int_Id%4U)*8U);
+	*Priority = (u8)(RegValue & XSCUGIC_PRIORITY_MASK);
+
+	/*
+	 * Determine the register to read to using the Int_Id.
+	 */
+	RegValue = XScuGic_DistReadReg(InstancePtr,
+	XSCUGIC_INT_CFG_OFFSET_CALC (Int_Id));
+
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue = RegValue >> ((Int_Id%16U)*2U);
+
+	*Trigger = (u8)(RegValue & XSCUGIC_INT_CFG_MASK);
+}
+/****************************************************************************/
+/**
+* Sets the target CPU for the interrupt of a peripheral
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Cpu_Id is a CPU number for which the interrupt has to be targeted
+* @param	Int_Id is the IRQ source number to modify
+*
+* @return	None.
+*
+* @note		None
+*
+*****************************************************************************/
+void XScuGic_InterruptMaptoCpu(XScuGic *InstancePtr, u8 Cpu_Id, u32 Int_Id)
+{
+	u32 RegValue, Offset;
+	RegValue = XScuGic_DistReadReg(InstancePtr,
+			XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id));
+
+	Offset =  (Int_Id & 0x3);
+
+	RegValue = (RegValue | (~(0xFF << (Offset*8))) );
+	RegValue |= ((Cpu_Id) << (Offset*8));
+
+	XScuGic_DistWriteReg(InstancePtr,
+						 XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id),
+						 RegValue);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic.h
new file mode 100644
index 000000000..d8efce92e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic.h
@@ -0,0 +1,327 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xscugic.h
+* @addtogroup scugic_v3_1
+* @{
+* @details
+*
+* The generic interrupt controller driver component.
+*
+* The interrupt controller driver uses the idea of priority for the various
+* handlers. Priority is an integer within the range of 1 and 31 inclusive with
+* default of 1 being the highest priority interrupt source. The priorities
+* of the various sources can be dynamically altered as needed through
+* hardware configuration.
+*
+* The generic interrupt controller supports the following
+* features:
+*
+*   - specific individual interrupt enabling/disabling
+*   - specific individual interrupt acknowledging
+*   - attaching specific callback function to handle interrupt source
+*   - assigning desired priority to interrupt source if default is not
+*     acceptable.
+*
+* Details about connecting the interrupt handler of the driver are contained
+* in the source file specific to interrupt processing, xscugic_intr.c.
+*
+* This driver is intended to be RTOS and processor independent.  It works with
+* physical addresses only.  Any needs for dynamic memory management, threads
+* or thread mutual exclusion, virtual memory, or cache control must be
+* satisfied by the layer above this driver.
+*
+* Interrupt Vector Tables
+*
+* The device ID of the interrupt controller device is used by the driver as a
+* direct index into the configuration data table. The user should populate the
+* vector table with handlers and callbacks at run-time using the
+* XScuGic_Connect() and XScuGic_Disconnect() functions.
+*
+* Each vector table entry corresponds to a device that can generate an
+* interrupt. Each entry contains an interrupt handler function and an
+* argument to be passed to the handler when an interrupt occurs.  The
+* user must use XScuGic_Connect() when the interrupt handler takes an
+* argument other than the base address.
+*
+* Nested Interrupts Processing
+*
+* Nested interrupts are not supported by this driver.
+*
+* NOTE:
+* The generic interrupt controller is not a part of the snoop control unit
+* as indicated by the prefix "scu" in the name of the driver.
+* It is an independent module in APU.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------------
+* 1.00a drg  01/19/00 First release
+* 1.01a sdm  11/09/11 The XScuGic and XScuGic_Config structures have changed.
+*		      The HandlerTable (of type XScuGic_VectorTableEntry) is
+*		      moved to XScuGic_Config structure from XScuGic structure.
+*
+*		      The "Config" entry in XScuGic structure is made as
+*		      pointer for better efficiency.
+*
+*		      A new file named as xscugic_hw.c is now added. It is
+*		      to implement low level driver routines without using
+*		      any xscugic instance pointer. They are useful when the
+*		      user wants to use xscugic through device id or
+*		      base address. The driver routines provided are explained
+*		      below.
+*		      XScuGic_DeviceInitialize that takes device id as
+*		      argument and initializes the device (without calling
+*		      XScuGic_CfgInitialize).
+*		      XScuGic_DeviceInterruptHandler that takes device id
+*		      as argument and calls appropriate handlers from the
+*		      HandlerTable.
+*		      XScuGic_RegisterHandler that registers a new handler
+*		      by taking xscugic hardware base address as argument.
+*		      LookupConfigByBaseAddress is used to return the
+*		      corresponding config structure from XScuGic_ConfigTable
+*		      based on the scugic base address passed.
+* 1.02a sdm  12/20/11 Removed AckBeforeService from the XScuGic_Config
+*		      structure.
+* 1.03a srt  02/27/13 Moved Offset calculation macros from *.c and *_hw.c to
+*		      *_hw.h
+*		      Added APIs
+*			- XScuGic_SetPriTrigTypeByDistAddr()
+*			- XScuGic_GetPriTrigTypeByDistAddr()
+*		      (CR 702687)
+*			Added support to direct interrupts to the appropriate CPU. Earlier
+*			  interrupts were directed to CPU1 (hard coded). Now depending
+*			  upon the CPU selected by the user (xparameters.h), interrupts
+*			  will be directed to the relevant CPU. This fixes CR 699688.
+* 1.04a hk   05/04/13 Assigned EffectiveAddr to CpuBaseAddress in
+*			  XScuGic_CfgInitialize. Fix for CR#704400 to remove warnings.
+*			  Moved functions XScuGic_SetPriTrigTypeByDistAddr and
+*             XScuGic_GetPriTrigTypeByDistAddr to xscugic_hw.c.
+*			  This is fix for CR#705621.
+* 1.05a hk   06/26/13 Modified tcl to export external interrupts correctly to
+*                     xparameters.h. Fix for CR's 690505, 708928 & 719359.
+* 2.0   adk  12/10/13 Updated as per the New Tcl API's
+* 2.1   adk  25/04/14 Fixed the CR:789373 changes are made in the driver tcl file.
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.2   asa  02/29/16 Modified DistributorInit function for Zynq AMP case. The
+*			  distributor is left uninitialized for Zynq AMP. It is assumed
+*             that the distributor will be initialized by Linux master. However
+*             for CortexR5 case, the earlier code is left unchanged where the
+*             the interrupt processor target registers in the distributor is
+*             initialized with the corresponding CPU ID on which the application
+*             built over the scugic driver runs.
+*             These changes fix CR#937243.
+*
+* 

+*
+******************************************************************************/
+
+#ifndef XSCUGIC_H /* prevent circular inclusions */
+#define XSCUGIC_H /* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xil_io.h"
+#include "xscugic_hw.h"
+#include "xil_exception.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+/* The following data type defines each entry in an interrupt vector table.
+ * The callback reference is the base address of the interrupting device
+ * for the low level driver and an instance pointer for the high level driver.
+ */
+typedef struct
+{
+	Xil_InterruptHandler Handler;
+	void *CallBackRef;
+} XScuGic_VectorTableEntry;
+
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct
+{
+	u16 DeviceId;		/**< Unique ID  of device */
+	u32 CpuBaseAddress;	/**< CPU Interface Register base address */
+	u32 DistBaseAddress;	/**< Distributor Register base address */
+	XScuGic_VectorTableEntry HandlerTable[XSCUGIC_MAX_NUM_INTR_INPUTS];/**<
+				 Vector table of interrupt handlers */
+} XScuGic_Config;
+
+/**
+ * The XScuGic driver instance data. The user is required to allocate a
+ * variable of this type for every intc device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct
+{
+	XScuGic_Config *Config;  /**< Configuration table entry */
+	u32 IsReady;		 /**< Device is initialized and ready */
+	u32 UnhandledInterrupts; /**< Intc Statistics */
+} XScuGic;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* Write the given CPU Interface register
+*
+* @param    InstancePtr is a pointer to the instance to be worked on.
+* @param    RegOffset is the register offset to be written
+* @param    Data is the 32-bit value to write to the register
+*
+* @return   None.
+*
+* @note
+* C-style signature:
+*    void XScuGic_CPUWriteReg(XScuGic *InstancePtr, u32 RegOffset, u32 Data)
+*
+*****************************************************************************/
+#define XScuGic_CPUWriteReg(InstancePtr, RegOffset, Data) \
+(XScuGic_WriteReg(((InstancePtr)->Config->CpuBaseAddress), (RegOffset), \
+					((u32)(Data))))
+
+/****************************************************************************/
+/**
+*
+* Read the given CPU Interface register
+*
+* @param    InstancePtr is a pointer to the instance to be worked on.
+* @param    RegOffset is the register offset to be read
+*
+* @return   The 32-bit value of the register
+*
+* @note
+* C-style signature:
+*    u32 XScuGic_CPUReadReg(XScuGic *InstancePtr, u32 RegOffset)
+*
+*****************************************************************************/
+#define XScuGic_CPUReadReg(InstancePtr, RegOffset) \
+	(XScuGic_ReadReg(((InstancePtr)->Config->CpuBaseAddress), (RegOffset)))
+
+/****************************************************************************/
+/**
+*
+* Write the given Distributor Interface register
+*
+* @param    InstancePtr is a pointer to the instance to be worked on.
+* @param    RegOffset is the register offset to be written
+* @param    Data is the 32-bit value to write to the register
+*
+* @return   None.
+*
+* @note
+* C-style signature:
+*    void XScuGic_DistWriteReg(XScuGic *InstancePtr, u32 RegOffset, u32 Data)
+*
+*****************************************************************************/
+#define XScuGic_DistWriteReg(InstancePtr, RegOffset, Data) \
+(XScuGic_WriteReg(((InstancePtr)->Config->DistBaseAddress), (RegOffset), \
+					((u32)(Data))))
+
+/****************************************************************************/
+/**
+*
+* Read the given Distributor Interface register
+*
+* @param    InstancePtr is a pointer to the instance to be worked on.
+* @param    RegOffset is the register offset to be read
+*
+* @return   The 32-bit value of the register
+*
+* @note
+* C-style signature:
+*    u32 XScuGic_DistReadReg(XScuGic *InstancePtr, u32 RegOffset)
+*
+*****************************************************************************/
+#define XScuGic_DistReadReg(InstancePtr, RegOffset) \
+(XScuGic_ReadReg(((InstancePtr)->Config->DistBaseAddress), (RegOffset)))
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Required functions in xscugic.c
+ */
+
+s32  XScuGic_Connect(XScuGic *InstancePtr, u32 Int_Id,
+			Xil_InterruptHandler Handler, void *CallBackRef);
+void XScuGic_Disconnect(XScuGic *InstancePtr, u32 Int_Id);
+
+void XScuGic_Enable(XScuGic *InstancePtr, u32 Int_Id);
+void XScuGic_Disable(XScuGic *InstancePtr, u32 Int_Id);
+
+s32  XScuGic_CfgInitialize(XScuGic *InstancePtr, XScuGic_Config *ConfigPtr,
+							u32 EffectiveAddr);
+
+s32  XScuGic_SoftwareIntr(XScuGic *InstancePtr, u32 Int_Id, u32 Cpu_Id);
+
+void XScuGic_GetPriorityTriggerType(XScuGic *InstancePtr, u32 Int_Id,
+					u8 *Priority, u8 *Trigger);
+void XScuGic_SetPriorityTriggerType(XScuGic *InstancePtr, u32 Int_Id,
+					u8 Priority, u8 Trigger);
+void XScuGic_InterruptMaptoCpu(XScuGic *InstancePtr, u8 Cpu_Id, u32 Int_Id);
+/*
+ * Initialization functions in xscugic_sinit.c
+ */
+XScuGic_Config *XScuGic_LookupConfig(u16 DeviceId);
+
+/*
+ * Interrupt functions in xscugic_intr.c
+ */
+void XScuGic_InterruptHandler(XScuGic *InstancePtr);
+
+/*
+ * Self-test functions in xscugic_selftest.c
+ */
+s32  XScuGic_SelfTest(XScuGic *InstancePtr);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif            /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_g.c
new file mode 100644
index 000000000..2457f6b23
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_g.c
@@ -0,0 +1,56 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xscugic.h"
+
+/*
+* The configuration table for devices
+*/
+
+XScuGic_Config XScuGic_ConfigTable[] =
+{
+	{
+		XPAR_PSU_RCPU_GIC_DEVICE_ID,
+		XPAR_PSU_RCPU_GIC_BASEADDR,
+		XPAR_PSU_RCPU_GIC_DIST_BASEADDR
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_hw.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_hw.c
new file mode 100644
index 000000000..626779720
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_hw.c
@@ -0,0 +1,570 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xscugic_hw.c
+* @addtogroup scugic_v3_1
+* @{
+*
+* This file contains low-level driver functions that can be used to access the
+* device.  The user should refer to the hardware device specification for more
+* details of the device operation.
+* These routines are used when the user does not want to create an instance of
+* XScuGic structure but still wants to use the ScuGic device. Hence the
+* routines provided here take device id or scugic base address as arguments.
+* Separate static versions of DistInit and CPUInit are provided to implement
+* the low level driver routines.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.01a sdm  07/18/11 First release
+* 1.03a srt  02/27/13 Moved Offset calculation macros from *_hw.c (CR
+*		      702687).
+*					  Added support to direct interrupts to the appropriate CPU.
+*			  Earlier interrupts were directed to CPU1 (hard coded). Now
+*			  depending upon the CPU selected by the user (xparameters.h),
+*			  interrupts will be directed to the relevant CPU.
+*			  This fixes CR 699688.
+* 1.04a hk   05/04/13 Fix for CR#705621. Moved functions
+*			  XScuGic_SetPriTrigTypeByDistAddr and
+*             XScuGic_GetPriTrigTypeByDistAddr here from xscugic.c
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* 

+*
+******************************************************************************/
+
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xscugic.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+static void DistInit(XScuGic_Config *Config, u32 CpuID);
+static void CPUInit(XScuGic_Config *Config);
+static XScuGic_Config *LookupConfigByBaseAddress(u32 CpuBaseAddress);
+
+/************************** Variable Definitions *****************************/
+
+extern XScuGic_Config XScuGic_ConfigTable[XPAR_XSCUGIC_NUM_INSTANCES];
+
+/*****************************************************************************/
+/**
+*
+* DistInit initializes the distributor of the GIC. The
+* initialization entails:
+*
+* - Write the trigger mode, priority and target CPU
+* - All interrupt sources are disabled
+* - Enable the distributor
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+* @param	CpuID is the Cpu ID to be initialized.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static void DistInit(XScuGic_Config *Config, u32 CpuID)
+{
+	u32 Int_Id;
+	u32 LocalCpuID = CpuID;
+
+#if USE_AMP==1
+	#warning "Building GIC for AMP"
+
+	/*
+	 * The distrubutor should not be initialized by FreeRTOS in the case of
+	 * AMP -- it is assumed that Linux is the master of this device in that
+	 * case.
+	 */
+	return;
+#endif
+
+	XScuGic_WriteReg(Config->DistBaseAddress, XSCUGIC_DIST_EN_OFFSET, 0U);
+
+	/*
+	 * Set the security domains in the int_security registers for non-secure
+	 * interrupts. All are secure, so leave at the default. Set to 1 for
+	 * non-secure interrupts.
+	 */
+
+
+	/*
+	 * For the Shared Peripheral Interrupts INT_ID[MAX..32], set:
+	 */
+
+	/*
+	 * 1. The trigger mode in the int_config register
+	 * Only write to the SPI interrupts, so start at 32
+	 */
+	for (Int_Id = 32U; Int_IdDistBaseAddress,
+			XSCUGIC_INT_CFG_OFFSET_CALC(Int_Id), 0U);
+	}
+
+
+#define DEFAULT_PRIORITY	0xa0a0a0a0U
+	for (Int_Id = 0U; Int_IdDistBaseAddress,
+				XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id),
+				DEFAULT_PRIORITY);
+	}
+
+	for (Int_Id = 32U; Int_IdDistBaseAddress,
+				XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id), LocalCpuID);
+	}
+
+	for (Int_Id = 0U; Int_IdDistBaseAddress,
+		XSCUGIC_EN_DIS_OFFSET_CALC(XSCUGIC_DISABLE_OFFSET,
+		Int_Id),
+		0xFFFFFFFFU);
+
+	}
+
+	XScuGic_WriteReg(Config->DistBaseAddress, XSCUGIC_DIST_EN_OFFSET,
+						XSCUGIC_EN_INT_MASK);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* CPUInit initializes the CPU Interface of the GIC. The initialization entails:
+*
+* - Set the priority of the CPU.
+* - Enable the CPU interface
+*
+* @param	ConfigPtr is a pointer to a config table for the particular
+*		device this driver is associated with.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+static void CPUInit(XScuGic_Config *Config)
+{
+	/*
+	 * Program the priority mask of the CPU using the Priority mask
+	 * register
+	 */
+	XScuGic_WriteReg(Config->CpuBaseAddress, XSCUGIC_CPU_PRIOR_OFFSET,
+									0xF0U);
+
+	/*
+	 * If the CPU operates in both security domains, set parameters in the
+	 * control_s register.
+	 * 1. Set FIQen=1 to use FIQ for secure interrupts,
+	 * 2. Program the AckCtl bit
+	 * 3. Program the SBPR bit to select the binary pointer behavior
+	 * 4. Set EnableS = 1 to enable secure interrupts
+	 * 5. Set EnbleNS = 1 to enable non secure interrupts
+	 */
+
+	/*
+	 * If the CPU operates only in the secure domain, setup the
+	 * control_s register.
+	 * 1. Set FIQen=1,
+	 * 2. Set EnableS=1, to enable the CPU interface to signal secure .
+	 * interrupts Only enable the IRQ output unless secure interrupts
+	 * are needed.
+	 */
+	XScuGic_WriteReg(Config->CpuBaseAddress, XSCUGIC_CONTROL_OFFSET, 0x07U);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* CfgInitialize a specific interrupt controller instance/driver. The
+* initialization entails:
+*
+* - Initialize fields of the XScuGic structure
+* - Initial vector table with stub function calls
+* - All interrupt sources are disabled
+*
+* @param InstancePtr is a pointer to the XScuGic instance to be worked on.
+* @param ConfigPtr is a pointer to a config table for the particular device
+*        this driver is associated with.
+* @param EffectiveAddr is the device base address in the virtual memory address
+*        space. The caller is responsible for keeping the address mapping
+*        from EffectiveAddr to the device physical base address unchanged
+*        once this function is invoked. Unexpected errors may occur if the
+*        address mapping changes after this function is called. If address
+*        translation is not used, use Config->BaseAddress for this parameters,
+*        passing the physical address instead.
+*
+* @return
+*
+* - XST_SUCCESS if initialization was successful
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+s32 XScuGic_DeviceInitialize(u32 DeviceId)
+{
+	XScuGic_Config *Config;
+	u32 Cpu_Id = (u32)XPAR_CPU_ID + (u32)1;
+
+	Config = &XScuGic_ConfigTable[(u32 )DeviceId];
+
+	DistInit(Config, Cpu_Id);
+
+	CPUInit(Config);
+
+	return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+* This function is the primary interrupt handler for the driver.  It must be
+* connected to the interrupt source such that it is called when an interrupt of
+* the interrupt controller is active. It will resolve which interrupts are
+* active and enabled and call the appropriate interrupt handler. It uses
+* the Interrupt Type information to determine when to acknowledge the
+* interrupt.Highest priority interrupts are serviced first.
+*
+* This function assumes that an interrupt vector table has been previously
+* initialized.  It does not verify that entries in the table are valid before
+* calling an interrupt handler.
+*
+* @param	DeviceId is the unique identifier for the ScuGic device.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XScuGic_DeviceInterruptHandler(void *DeviceId)
+{
+
+	u32 InterruptID;
+	u32 IntIDFull;
+	XScuGic_VectorTableEntry *TablePtr;
+	XScuGic_Config *CfgPtr;
+
+	CfgPtr = &XScuGic_ConfigTable[(INTPTR )DeviceId];
+
+	/*
+	 * Read the int_ack register to identify the highest priority
+	 * interrupt ID and make sure it is valid. Reading Int_Ack will
+	 * clear the interrupt in the GIC.
+	 */
+	IntIDFull = XScuGic_ReadReg(CfgPtr->CpuBaseAddress, XSCUGIC_INT_ACK_OFFSET);
+	InterruptID = IntIDFull & XSCUGIC_ACK_INTID_MASK;
+	if(XSCUGIC_MAX_NUM_INTR_INPUTS < InterruptID){
+		goto IntrExit;
+	}
+
+	/*
+	 * If the interrupt is shared, do some locking here if there are
+	 * multiple processors.
+	 */
+	/*
+	 * If pre-eption is required:
+	 * Re-enable pre-emption by setting the CPSR I bit for non-secure ,
+	 * interrupts or the F bit for secure interrupts
+	 */
+
+	/*
+	 * If we need to change security domains, issue a SMC instruction here.
+	 */
+
+	/*
+	 * Execute the ISR. Jump into the Interrupt service routine based on
+	 * the IRQSource. A software trigger is cleared by the ACK.
+	 */
+	TablePtr = &(CfgPtr->HandlerTable[InterruptID]);
+	if(TablePtr != NULL) {
+		TablePtr->Handler(TablePtr->CallBackRef);
+	}
+
+IntrExit:
+	/*
+	 * Write to the EOI register, we are all done here.
+	 * Let this function return, the boot code will restore the stack.
+	 */
+	XScuGic_WriteReg(CfgPtr->CpuBaseAddress, XSCUGIC_EOI_OFFSET, IntIDFull);
+
+	/*
+	 * Return from the interrupt. Change security domains could happen
+	 * here.
+	 */
+}
+
+/*****************************************************************************/
+/**
+*
+* Register a handler function for a specific interrupt ID.  The vector table
+* of the interrupt controller is updated, overwriting any previous handler.
+* The handler function will be called when an interrupt occurs for the given
+* interrupt ID.
+*
+* @param	BaseAddress is the CPU Interface Register base address of the
+*		interrupt controller whose vector table will be modified.
+* @param	InterruptId is the interrupt ID to be associated with the input
+*		handler.
+* @param	Handler is the function pointer that will be added to
+*		the vector table for the given interrupt ID.
+* @param	CallBackRef is the argument that will be passed to the new
+*		handler function when it is called. This is user-specific.
+*
+* @return	None.
+*
+* @note
+*
+* Note that this function has no effect if the input base address is invalid.
+*
+******************************************************************************/
+void XScuGic_RegisterHandler(u32 BaseAddress, s32 InterruptID,
+			     Xil_InterruptHandler IntrHandler, void *CallBackRef)
+{
+	XScuGic_Config *CfgPtr;
+	CfgPtr = LookupConfigByBaseAddress(BaseAddress);
+
+	if(CfgPtr != NULL) {
+		if( IntrHandler != NULL) {
+			CfgPtr->HandlerTable[InterruptID].Handler = IntrHandler;
+		}
+		if( CallBackRef != NULL) {
+			CfgPtr->HandlerTable[InterruptID].CallBackRef = CallBackRef;
+		}
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* Looks up the device configuration based on the CPU interface base address of
+* the device. A table contains the configuration info for each device in the
+* system.
+*
+* @param	CpuBaseAddress is the CPU Interface Register base address.
+*
+* @return 	A pointer to the configuration structure for the specified
+*		device, or NULL if the device was not found.
+*
+* @note		None.
+*
+******************************************************************************/
+static XScuGic_Config *LookupConfigByBaseAddress(u32 CpuBaseAddress)
+{
+	XScuGic_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index = 0U; Index < XPAR_SCUGIC_NUM_INSTANCES; Index++) {
+		if (XScuGic_ConfigTable[Index].CpuBaseAddress ==
+				CpuBaseAddress) {
+			CfgPtr = &XScuGic_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XScuGic_Config *)CfgPtr;
+}
+
+/****************************************************************************/
+/**
+* Sets the interrupt priority and trigger type for the specificd IRQ source.
+*
+* @param	BaseAddr is the device base address
+* @param	Int_Id is the IRQ source number to modify
+* @param	Priority is the new priority for the IRQ source. 0 is highest
+* 			priority, 0xF8 (248) is lowest. There are 32 priority levels
+*			supported with a step of 8. Hence the supported priorities are
+*			0, 8, 16, 32, 40 ..., 248.
+* @param	Trigger is the new trigger type for the IRQ source.
+* Each bit pair describes the configuration for an INT_ID.
+* SFI    Read Only    b10 always
+* PPI    Read Only    depending on how the PPIs are configured.
+*                    b01    Active HIGH level sensitive
+*                    b11 Rising edge sensitive
+* SPI                LSB is read only.
+*                    b01    Active HIGH level sensitive
+*                    b11 Rising edge sensitive/
+*
+* @return	None.
+*
+* @note		This API has the similar functionality of XScuGic_SetPriority
+*	        TriggerType() and should be used when there is no InstancePtr.
+*
+*****************************************************************************/
+void XScuGic_SetPriTrigTypeByDistAddr(u32 DistBaseAddress, u32 Int_Id,
+					u8 Priority, u8 Trigger)
+{
+	u32 RegValue;
+	u8 LocalPriority = Priority;
+
+	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertVoid(Trigger <= XSCUGIC_INT_CFG_MASK);
+	Xil_AssertVoid(LocalPriority <= XSCUGIC_MAX_INTR_PRIO_VAL);
+
+	/*
+	 * Determine the register to write to using the Int_Id.
+	 */
+	RegValue = XScuGic_ReadReg(DistBaseAddress,
+			XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id));
+
+	/*
+	 * The priority bits are Bits 7 to 3 in GIC Priority Register. This
+	 * means the number of priority levels supported are 32 and they are
+	 * in steps of 8. The priorities can be 0, 8, 16, 32, 48, ... etc.
+	 * The lower order 3 bits are masked before putting it in the register.
+	 */
+	LocalPriority = LocalPriority & XSCUGIC_INTR_PRIO_MASK;
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue &= ~(XSCUGIC_PRIORITY_MASK << ((Int_Id%4U)*8U));
+	RegValue |= (u32)LocalPriority << ((Int_Id%4U)*8U);
+
+	/*
+	 * Write the value back to the register.
+	 */
+	XScuGic_WriteReg(DistBaseAddress, XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id),
+					RegValue);
+	/*
+	 * Determine the register to write to using the Int_Id.
+	 */
+	RegValue = XScuGic_ReadReg(DistBaseAddress,
+			XSCUGIC_INT_CFG_OFFSET_CALC (Int_Id));
+
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue &= ~(XSCUGIC_INT_CFG_MASK << ((Int_Id%16U)*2U));
+	RegValue |= (u32)Trigger << ((Int_Id%16U)*2U);
+
+	/*
+	 * Write the value back to the register.
+	 */
+	XScuGic_WriteReg(DistBaseAddress, XSCUGIC_INT_CFG_OFFSET_CALC(Int_Id),
+				RegValue);
+}
+
+/****************************************************************************/
+/**
+* Gets the interrupt priority and trigger type for the specificd IRQ source.
+*
+* @param	BaseAddr is the device base address
+* @param	Int_Id is the IRQ source number to modify
+* @param	Priority is a pointer to the value of the priority of the IRQ
+*		source. This is a return value.
+* @param	Trigger is pointer to the value of the trigger of the IRQ
+*		source. This is a return value.
+*
+* @return	None.
+*
+* @note		This API has the similar functionality of XScuGic_GetPriority
+*	        TriggerType() and should be used when there is no InstancePtr.
+*
+*****************************************************************************/
+void XScuGic_GetPriTrigTypeByDistAddr(u32 DistBaseAddress, u32 Int_Id,
+					u8 *Priority, u8 *Trigger)
+{
+	u32 RegValue;
+
+	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
+	Xil_AssertVoid(Priority != NULL);
+	Xil_AssertVoid(Trigger != NULL);
+
+	/*
+	 * Determine the register to read to using the Int_Id.
+	 */
+	RegValue = XScuGic_ReadReg(DistBaseAddress,
+	    XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id));
+
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue = RegValue >> ((Int_Id%4U)*8U);
+	*Priority = (u8)(RegValue & XSCUGIC_PRIORITY_MASK);
+
+	/*
+	 * Determine the register to read to using the Int_Id.
+	 */
+	RegValue = XScuGic_ReadReg(DistBaseAddress,
+	    XSCUGIC_INT_CFG_OFFSET_CALC (Int_Id));
+
+	/*
+	 * Shift and Mask the correct bits for the priority and trigger in the
+	 * register
+	 */
+	RegValue = RegValue >> ((Int_Id%16U)*2U);
+
+	*Trigger = (u8)(RegValue & XSCUGIC_INT_CFG_MASK);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_hw.h
new file mode 100644
index 000000000..5eaa633e3
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_hw.h
@@ -0,0 +1,642 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xscugic_hw.h
+* @addtogroup scugic_v3_1
+* @{
+*
+* This header file contains identifiers and HW access functions (or
+* macros) that can be used to access the device.  The user should refer to the
+* hardware device specification for more details of the device operation.
+* The driver functions/APIs are defined in xscugic.h.
+*
+* This GIC device has two parts, a distributor and CPU interface(s). Each part
+* has separate register definition sections.
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------------
+* 1.00a drg  01/19/10 First release
+* 1.01a sdm  11/09/11 "xil_exception.h" added as include.
+*		      Macros XScuGic_EnableIntr and XScuGic_DisableIntr are
+*		      added to enable or disable interrupts based on
+*		      Distributor Register base address. Normally users use
+*		      XScuGic instance and call XScuGic_Enable or
+*		      XScuGic_Disable to enable/disable interrupts. These
+*		      new macros are provided when user does not want to
+*		      use an instance pointer but still wants to enable or
+*		      disable interrupts.
+*		      Function prototypes for functions (present in newly
+*		      added file xscugic_hw.c) are added.
+* 1.03a srt  02/27/13 Moved Offset calculation macros from *_hw.c (CR
+*		      702687).
+* 1.04a hk   05/04/13 Fix for CR#705621. Moved function prototypes
+*		      XScuGic_SetPriTrigTypeByDistAddr and
+*         	      XScuGic_GetPriTrigTypeByDistAddr here from xscugic.h
+* 3.0	pkp  12/09/14 changed XSCUGIC_MAX_NUM_INTR_INPUTS for
+*		      Zynq Ultrascale Mp
+* 3.0   kvn  02/13/14 Modified code for MISRA-C:2012 compliance.
+* 3.2	pkp  11/09/15 Corrected the interrupt processsor target mask value
+*					  for CPU interface 2 i.e. XSCUGIC_SPI_CPU2_MASK
+* 

+*
+******************************************************************************/
+
+#ifndef XSCUGIC_HW_H /* prevent circular inclusions */
+#define XSCUGIC_HW_H /* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+#include "xil_exception.h"
+
+/************************** Constant Definitions *****************************/
+
+/*
+ * The maximum number of interrupts supported by the hardware.
+ */
+#ifdef __ARM_NEON__
+#define XSCUGIC_MAX_NUM_INTR_INPUTS    	95U /* Maximum number of interrupt defined by Zynq */
+#else
+#define XSCUGIC_MAX_NUM_INTR_INPUTS    	195U /* Maximum number of interrupt defined by Zynq Ultrascale Mp */
+#endif
+
+/*
+ * The maximum priority value that can be used in the GIC.
+ */
+#define XSCUGIC_MAX_INTR_PRIO_VAL    	248U
+#define XSCUGIC_INTR_PRIO_MASK			0x000000F8U
+
+/** @name Distributor Interface Register Map
+ *
+ * Define the offsets from the base address for all Distributor registers of
+ * the interrupt controller, some registers may be reserved in the hardware
+ * device.
+ * @{
+ */
+#define XSCUGIC_DIST_EN_OFFSET		0x00000000U /**< Distributor Enable
+							Register */
+#define XSCUGIC_IC_TYPE_OFFSET		0x00000004U /**< Interrupt Controller
+							Type Register */
+#define XSCUGIC_DIST_IDENT_OFFSET	0x00000008U /**< Implementor ID
+							Register */
+#define XSCUGIC_SECURITY_OFFSET		0x00000080U /**< Interrupt Security
+							Register */
+#define XSCUGIC_ENABLE_SET_OFFSET	0x00000100U /**< Enable Set
+							Register */
+#define XSCUGIC_DISABLE_OFFSET		0x00000180U /**< Enable Clear Register */
+#define XSCUGIC_PENDING_SET_OFFSET	0x00000200U /**< Pending Set
+							Register */
+#define XSCUGIC_PENDING_CLR_OFFSET	0x00000280U /**< Pending Clear
+							Register */
+#define XSCUGIC_ACTIVE_OFFSET		0x00000300U /**< Active Status Register */
+#define XSCUGIC_PRIORITY_OFFSET		0x00000400U /**< Priority Level Register */
+#define XSCUGIC_SPI_TARGET_OFFSET	0x00000800U /**< SPI Target
+							Register 0x800-0x8FB */
+#define XSCUGIC_INT_CFG_OFFSET		0x00000C00U /**< Interrupt Configuration
+							Register 0xC00-0xCFC */
+#define XSCUGIC_PPI_STAT_OFFSET		0x00000D00U /**< PPI Status Register */
+#define XSCUGIC_SPI_STAT_OFFSET		0x00000D04U /**< SPI Status Register
+							0xd04-0xd7C */
+#define XSCUGIC_AHB_CONFIG_OFFSET	0x00000D80U /**< AHB Configuration
+							Register */
+#define XSCUGIC_SFI_TRIG_OFFSET		0x00000F00U /**< Software Triggered
+							Interrupt Register */
+#define XSCUGIC_PERPHID_OFFSET		0x00000FD0U /**< Peripheral ID Reg */
+#define XSCUGIC_PCELLID_OFFSET		0x00000FF0U /**< Pcell ID Register */
+/* @} */
+
+/** @name  Distributor Enable Register
+ * Controls if the distributor response to external interrupt inputs.
+ * @{
+ */
+#define XSCUGIC_EN_INT_MASK		0x00000001U /**< Interrupt In Enable */
+/* @} */
+
+/** @name  Interrupt Controller Type Register
+ * @{
+ */
+#define XSCUGIC_LSPI_MASK	0x0000F800U /**< Number of Lockable
+						Shared Peripheral
+						Interrupts*/
+#define XSCUGIC_DOMAIN_MASK	0x00000400U /**< Number os Security domains*/
+#define XSCUGIC_CPU_NUM_MASK	0x000000E0U /**< Number of CPU Interfaces */
+#define XSCUGIC_NUM_INT_MASK	0x0000001FU /**< Number of Interrupt IDs */
+/* @} */
+
+/** @name  Implementor ID Register
+ * Implementor and revision information.
+ * @{
+ */
+#define XSCUGIC_REV_MASK	0x00FFF000U /**< Revision Number */
+#define XSCUGIC_IMPL_MASK	0x00000FFFU /**< Implementor */
+/* @} */
+
+/** @name  Interrupt Security Registers
+ * Each bit controls the security level of an interrupt, either secure or non
+ * secure. These registers can only be accessed using secure read and write.
+ * There are registers for each of the CPU interfaces at offset 0x080.  A
+ * register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 32 of these registers staring at location 0x084.
+ * @{
+ */
+#define XSCUGIC_INT_NS_MASK	0x00000001U /**< Each bit corresponds to an
+						INT_ID */
+/* @} */
+
+/** @name  Enable Set Register
+ * Each bit controls the enabling of an interrupt, a 0 is disabled, a 1 is
+ * enabled. Writing a 0 has no effect. Use the ENABLE_CLR register to set a
+ * bit to 0.
+ * There are registers for each of the CPU interfaces at offset 0x100. With up
+ * to 8 registers aliased to the same address. A register set for the SPI
+ * interrupts is available to all CPU interfaces.
+ * There are up to 32 of these registers staring at location 0x104.
+ * @{
+ */
+#define XSCUGIC_INT_EN_MASK	0x00000001U /**< Each bit corresponds to an
+						INT_ID */
+/* @} */
+
+/** @name  Enable Clear Register
+ * Each bit controls the disabling of an interrupt, a 0 is disabled, a 1 is
+ * enabled. Writing a 0 has no effect. Writing a 1 disables an interrupt and
+ * sets the corresponding bit to 0.
+ * There are registers for each of the CPU interfaces at offset 0x180. With up
+ * to 8 registers aliased to the same address.
+ * A register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 32 of these registers staring at location 0x184.
+ * @{
+ */
+#define XSCUGIC_INT_CLR_MASK	0x00000001U /**< Each bit corresponds to an
+						INT_ID */
+/* @} */
+
+/** @name  Pending Set Register
+ * Each bit controls the Pending or Active and Pending state of an interrupt, a
+ * 0 is not pending, a 1 is pending. Writing a 0 has no effect. Writing a 1 sets
+ * an interrupt to the pending state.
+ * There are registers for each of the CPU interfaces at offset 0x200. With up
+ * to 8 registers aliased to the same address.
+ * A register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 32 of these registers staring at location 0x204.
+ * @{
+ */
+#define XSCUGIC_PEND_SET_MASK	0x00000001U /**< Each bit corresponds to an
+						INT_ID */
+/* @} */
+
+/** @name  Pending Clear Register
+ * Each bit can clear the Pending or Active and Pending state of an interrupt, a
+ * 0 is not pending, a 1 is pending. Writing a 0 has no effect. Writing a 1
+ * clears the pending state of an interrupt.
+ * There are registers for each of the CPU interfaces at offset 0x280. With up
+ * to 8 registers aliased to the same address.
+ * A register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 32 of these registers staring at location 0x284.
+ * @{
+ */
+#define XSCUGIC_PEND_CLR_MASK	0x00000001U /**< Each bit corresponds to an
+						INT_ID */
+/* @} */
+
+/** @name  Active Status Register
+ * Each bit provides the Active status of an interrupt, a
+ * 0 is not Active, a 1 is Active. This is a read only register.
+ * There are registers for each of the CPU interfaces at offset 0x300. With up
+ * to 8 registers aliased to each address.
+ * A register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 32 of these registers staring at location 0x380.
+ * @{
+ */
+#define XSCUGIC_ACTIVE_MASK	0x00000001U /**< Each bit corresponds to an
+					      INT_ID */
+/* @} */
+
+/** @name  Priority Level Register
+ * Each byte in a Priority Level Register sets the priority level of an
+ * interrupt. Reading the register provides the priority level of an interrupt.
+ * There are registers for each of the CPU interfaces at offset 0x400 through
+ * 0x41C. With up to 8 registers aliased to each address.
+ * 0 is highest priority, 0xFF is lowest.
+ * A register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 255 of these registers staring at location 0x420.
+ * @{
+ */
+#define XSCUGIC_PRIORITY_MASK	0x000000FFU /**< Each Byte corresponds to an
+						INT_ID */
+#define XSCUGIC_PRIORITY_MAX	0x000000FFU /**< Highest value of a priority
+						actually the lowest priority*/
+/* @} */
+
+/** @name  SPI Target Register 0x800-0x8FB
+ * Each byte references a separate SPI and programs which of the up to 8 CPU
+ * interfaces are sent a Pending interrupt.
+ * There are registers for each of the CPU interfaces at offset 0x800 through
+ * 0x81C. With up to 8 registers aliased to each address.
+ * A register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 255 of these registers staring at location 0x820.
+ *
+ * This driver does not support multiple CPU interfaces. These are included
+ * for complete documentation.
+ * @{
+ */
+#define XSCUGIC_SPI_CPU7_MASK	0x00000080U /**< CPU 7 Mask*/
+#define XSCUGIC_SPI_CPU6_MASK	0x00000040U /**< CPU 6 Mask*/
+#define XSCUGIC_SPI_CPU5_MASK	0x00000020U /**< CPU 5 Mask*/
+#define XSCUGIC_SPI_CPU4_MASK	0x00000010U /**< CPU 4 Mask*/
+#define XSCUGIC_SPI_CPU3_MASK	0x00000008U /**< CPU 3 Mask*/
+#define XSCUGIC_SPI_CPU2_MASK	0x00000004U /**< CPU 2 Mask*/
+#define XSCUGIC_SPI_CPU1_MASK	0x00000002U /**< CPU 1 Mask*/
+#define XSCUGIC_SPI_CPU0_MASK	0x00000001U /**< CPU 0 Mask*/
+/* @} */
+
+/** @name  Interrupt Configuration Register 0xC00-0xCFC
+ * The interrupt configuration registers program an SFI to be active HIGH level
+ * sensitive or rising edge sensitive.
+ * Each bit pair describes the configuration for an INT_ID.
+ * SFI    Read Only    b10 always
+ * PPI    Read Only    depending on how the PPIs are configured.
+ *                    b01    Active HIGH level sensitive
+ *                    b11 Rising edge sensitive
+ * SPI                LSB is read only.
+ *                    b01    Active HIGH level sensitive
+ *                    b11 Rising edge sensitive/
+ * There are registers for each of the CPU interfaces at offset 0xC00 through
+ * 0xC04. With up to 8 registers aliased to each address.
+ * A register set for the SPI interrupts is available to all CPU interfaces.
+ * There are up to 255 of these registers staring at location 0xC08.
+ * @{
+ */
+#define XSCUGIC_INT_CFG_MASK    0x00000003U    /**< */
+/* @} */
+
+/** @name  PPI Status Register
+ * Enables an external AMBA master to access the status of the PPI inputs.
+ * A CPU can only read the status of its local PPI signals and cannot read the
+ * status for other CPUs.
+ * This register is aliased for each CPU interface.
+ * @{
+ */
+#define XSCUGIC_PPI_C15_MASK	0x00008000U    /**< PPI Status */
+#define XSCUGIC_PPI_C14_MASK	0x00004000U    /**< PPI Status */
+#define XSCUGIC_PPI_C13_MASK	0x00002000U    /**< PPI Status */
+#define XSCUGIC_PPI_C12_MASK	0x00001000U    /**< PPI Status */
+#define XSCUGIC_PPI_C11_MASK	0x00000800U    /**< PPI Status */
+#define XSCUGIC_PPI_C10_MASK	0x00000400U    /**< PPI Status */
+#define XSCUGIC_PPI_C09_MASK	0x00000200U    /**< PPI Status */
+#define XSCUGIC_PPI_C08_MASK	0x00000100U    /**< PPI Status */
+#define XSCUGIC_PPI_C07_MASK	0x00000080U    /**< PPI Status */
+#define XSCUGIC_PPI_C06_MASK	0x00000040U    /**< PPI Status */
+#define XSCUGIC_PPI_C05_MASK	0x00000020U    /**< PPI Status */
+#define XSCUGIC_PPI_C04_MASK	0x00000010U    /**< PPI Status */
+#define XSCUGIC_PPI_C03_MASK	0x00000008U    /**< PPI Status */
+#define XSCUGIC_PPI_C02_MASK	0x00000004U    /**< PPI Status */
+#define XSCUGIC_PPI_C01_MASK	0x00000002U    /**< PPI Status */
+#define XSCUGIC_PPI_C00_MASK	0x00000001U    /**< PPI Status */
+/* @} */
+
+/** @name  SPI Status Register 0xd04-0xd7C
+ * Enables an external AMBA master to access the status of the SPI inputs.
+ * There are up to 63 registers if the maximum number of SPI inputs are
+ * configured.
+ * @{
+ */
+#define XSCUGIC_SPI_N_MASK    0x00000001U    /**< Each bit corresponds to an SPI
+					     input */
+/* @} */
+
+/** @name  AHB Configuration Register
+ * Provides the status of the CFGBIGEND input signal and allows the endianess
+ * of the GIC to be set.
+ * @{
+ */
+#define XSCUGIC_AHB_END_MASK       0x00000004U    /**< 0-GIC uses little Endian,
+                                                  1-GIC uses Big Endian */
+#define XSCUGIC_AHB_ENDOVR_MASK    0x00000002U    /**< 0-Uses CFGBIGEND control,
+                                                  1-use the AHB_END bit */
+#define XSCUGIC_AHB_TIE_OFF_MASK   0x00000001U    /**< State of CFGBIGEND */
+
+/* @} */
+
+/** @name  Software Triggered Interrupt Register
+ * Controls issueing of software interrupts.
+ * @{
+ */
+#define XSCUGIC_SFI_SELFTRIG_MASK	0x02010000U
+#define XSCUGIC_SFI_TRIG_TRGFILT_MASK    0x03000000U    /**< Target List filter
+                                                            b00-Use the target List
+                                                            b01-All CPUs except requester
+                                                            b10-To Requester
+                                                            b11-reserved */
+#define XSCUGIC_SFI_TRIG_CPU_MASK	0x00FF0000U    /**< CPU Target list */
+#define XSCUGIC_SFI_TRIG_SATT_MASK	0x00008000U    /**< 0= Use a secure interrupt */
+#define XSCUGIC_SFI_TRIG_INTID_MASK	0x0000000FU    /**< Set to the INTID
+                                                        signaled to the CPU*/
+/* @} */
+
+/** @name CPU Interface Register Map
+ *
+ * Define the offsets from the base address for all CPU registers of the
+ * interrupt controller, some registers may be reserved in the hardware device.
+ * @{
+ */
+#define XSCUGIC_CONTROL_OFFSET		0x00000000U /**< CPU Interface Control
+							Register */
+#define XSCUGIC_CPU_PRIOR_OFFSET	0x00000004U /**< Priority Mask Reg */
+#define XSCUGIC_BIN_PT_OFFSET		0x00000008U /**< Binary Point Register */
+#define XSCUGIC_INT_ACK_OFFSET		0x0000000CU /**< Interrupt ACK Reg */
+#define XSCUGIC_EOI_OFFSET		0x00000010U /**< End of Interrupt Reg */
+#define XSCUGIC_RUN_PRIOR_OFFSET	0x00000014U /**< Running Priority Reg */
+#define XSCUGIC_HI_PEND_OFFSET		0x00000018U /**< Highest Pending Interrupt
+							Register */
+#define XSCUGIC_ALIAS_BIN_PT_OFFSET	0x0000001CU /**< Aliased non-Secure
+						        Binary Point Register */
+
+/**<  0x00000020 to 0x00000FBC are reserved and should not be read or written
+ * to. */
+/* @} */
+
+
+/** @name Control Register
+ * CPU Interface Control register definitions
+ * All bits are defined here although some are not available in the non-secure
+ * mode.
+ * @{
+ */
+#define XSCUGIC_CNTR_SBPR_MASK	0x00000010U    /**< Secure Binary Pointer,
+                                                 0=separate registers,
+                                                 1=both use bin_pt_s */
+#define XSCUGIC_CNTR_FIQEN_MASK	0x00000008U    /**< Use nFIQ_C for secure
+                                                  interrupts,
+                                                  0= use IRQ for both,
+                                                  1=Use FIQ for secure, IRQ for non*/
+#define XSCUGIC_CNTR_ACKCTL_MASK	0x00000004U    /**< Ack control for secure or non secure */
+#define XSCUGIC_CNTR_EN_NS_MASK		0x00000002U    /**< Non Secure enable */
+#define XSCUGIC_CNTR_EN_S_MASK		0x00000001U    /**< Secure enable, 0=Disabled, 1=Enabled */
+/* @} */
+
+/** @name Priority Mask Register
+ * Priority Mask register definitions
+ * The CPU interface does not send interrupt if the level of the interrupt is
+ * lower than the level of the register.
+ * @{
+ */
+/*#define XSCUGIC_PRIORITY_MASK		0x000000FFU*/   /**< All interrupts */
+/* @} */
+
+/** @name Binary Point Register
+ * Binary Point register definitions
+ * @{
+ */
+
+#define XSCUGIC_BIN_PT_MASK	0x00000007U  /**< Binary point mask value
+						Value  Secure  Non-secure
+						b000    0xFE    0xFF
+						b001    0xFC    0xFE
+						b010    0xF8    0xFC
+						b011    0xF0    0xF8
+						b100    0xE0    0xF0
+						b101    0xC0    0xE0
+						b110    0x80    0xC0
+						b111    0x00    0x80
+						*/
+/*@}*/
+
+/** @name Interrupt Acknowledge Register
+ * Interrupt Acknowledge register definitions
+ * Identifies the current Pending interrupt, and the CPU ID for software
+ * interrupts.
+ */
+#define XSCUGIC_ACK_INTID_MASK		0x000003FFU /**< Interrupt ID */
+#define XSCUGIC_CPUID_MASK		0x00000C00U /**< CPU ID */
+/* @} */
+
+/** @name End of Interrupt Register
+ * End of Interrupt register definitions
+ * Allows the CPU to signal the GIC when it completes an interrupt service
+ * routine.
+ */
+#define XSCUGIC_EOI_INTID_MASK		0x000003FFU /**< Interrupt ID */
+
+/* @} */
+
+/** @name Running Priority Register
+ * Running Priority register definitions
+ * Identifies the interrupt priority level of the highest priority active
+ * interrupt.
+ */
+#define XSCUGIC_RUN_PRIORITY_MASK	0x000000FFU    /**< Interrupt Priority */
+/* @} */
+
+/*
+ * Highest Pending Interrupt register definitions
+ * Identifies the interrupt priority of the highest priority pending interupt
+ */
+#define XSCUGIC_PEND_INTID_MASK		0x000003FFU /**< Pending Interrupt ID */
+/*#define XSCUGIC_CPUID_MASK		0x00000C00U */	 /**< CPU ID */
+/* @} */
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* Read the Interrupt Configuration Register offset for an interrupt id.
+*
+* @param	InterruptID is the interrupt number.
+*
+* @return	The 32-bit value of the offset
+*
+* @note
+*
+*****************************************************************************/
+#define XSCUGIC_INT_CFG_OFFSET_CALC(InterruptID) \
+	((u32)XSCUGIC_INT_CFG_OFFSET + (((InterruptID)/16U) * 4U))
+
+/****************************************************************************/
+/**
+*
+* Read the Interrupt Priority Register offset for an interrupt id.
+*
+* @param	InterruptID is the interrupt number.
+*
+* @return	The 32-bit value of the offset
+*
+* @note
+*
+*****************************************************************************/
+#define XSCUGIC_PRIORITY_OFFSET_CALC(InterruptID) \
+	((u32)XSCUGIC_PRIORITY_OFFSET + (((InterruptID)/4U) * 4U))
+
+/****************************************************************************/
+/**
+*
+* Read the SPI Target Register offset for an interrupt id.
+*
+* @param	InterruptID is the interrupt number.
+*
+* @return	The 32-bit value of the offset
+*
+* @note
+*
+*****************************************************************************/
+#define XSCUGIC_SPI_TARGET_OFFSET_CALC(InterruptID) \
+	((u32)XSCUGIC_SPI_TARGET_OFFSET + (((InterruptID)/4U) * 4U))
+
+/****************************************************************************/
+/**
+*
+* Read the Interrupt Clear-Enable Register offset for an interrupt ID
+*
+* @param	Register is the register offset for the clear/enable bank.
+* @param	InterruptID is the interrupt number.
+*
+* @return	The 32-bit value of the offset
+*
+* @note
+*
+*****************************************************************************/
+#define XSCUGIC_EN_DIS_OFFSET_CALC(Register, InterruptID) \
+		((Register) + (((InterruptID)/32U) * 4U))
+
+/****************************************************************************/
+/**
+*
+* Read the given Intc register.
+*
+* @param	BaseAddress is the base address of the device.
+* @param	RegOffset is the register offset to be read
+*
+* @return	The 32-bit value of the register
+*
+* @note
+* C-style signature:
+*    u32 XScuGic_ReadReg(u32 BaseAddress, u32 RegOffset)
+*
+*****************************************************************************/
+#define XScuGic_ReadReg(BaseAddress, RegOffset) \
+	(Xil_In32((BaseAddress) + (RegOffset)))
+
+
+/****************************************************************************/
+/**
+*
+* Write the given Intc register.
+*
+* @param	BaseAddress is the base address of the device.
+* @param	RegOffset is the register offset to be written
+* @param	Data is the 32-bit value to write to the register
+*
+* @return	None.
+*
+* @note
+* C-style signature:
+*    void XScuGic_WriteReg(u32 BaseAddress, u32 RegOffset, u32 Data)
+*
+*****************************************************************************/
+#define XScuGic_WriteReg(BaseAddress, RegOffset, Data) \
+	(Xil_Out32(((BaseAddress) + (RegOffset)), ((u32)(Data))))
+
+
+/****************************************************************************/
+/**
+*
+* Enable specific interrupt(s) in the interrupt controller.
+*
+* @param	DistBaseAddress is the Distributor Register base address of the
+*		device
+* @param	Int_Id is the ID of the interrupt source and should be in the
+*		range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
+*
+* @return	None.
+*
+* @note		C-style signature:
+*		void XScuGic_EnableIntr(u32 DistBaseAddress, u32 Int_Id)
+*
+*****************************************************************************/
+#define XScuGic_EnableIntr(DistBaseAddress, Int_Id) \
+	XScuGic_WriteReg((DistBaseAddress), \
+			 XSCUGIC_ENABLE_SET_OFFSET + (((Int_Id) / 32U) * 4U), \
+			 (0x00000001U << ((Int_Id) % 32U)))
+
+/****************************************************************************/
+/**
+*
+* Disable specific interrupt(s) in the interrupt controller.
+*
+* @param	DistBaseAddress is the Distributor Register base address of the
+*		device
+* @param	Int_Id is the ID of the interrupt source and should be in the
+*		range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
+*
+*
+* @return	None.
+*
+* @note		C-style signature:
+*		void XScuGic_DisableIntr(u32 DistBaseAddress, u32 Int_Id)
+*
+*****************************************************************************/
+#define XScuGic_DisableIntr(DistBaseAddress, Int_Id) \
+	XScuGic_WriteReg((DistBaseAddress), \
+			 XSCUGIC_DISABLE_OFFSET + (((Int_Id) / 32U) * 4U), \
+			 (0x00000001U << ((Int_Id) % 32U)))
+
+
+/************************** Function Prototypes ******************************/
+
+void XScuGic_DeviceInterruptHandler(void *DeviceId);
+s32  XScuGic_DeviceInitialize(u32 DeviceId);
+void XScuGic_RegisterHandler(u32 BaseAddress, s32 InterruptID,
+			     Xil_InterruptHandler Handler, void *CallBackRef);
+void XScuGic_SetPriTrigTypeByDistAddr(u32 DistBaseAddress, u32 Int_Id,
+                                        u8 Priority, u8 Trigger);
+void XScuGic_GetPriTrigTypeByDistAddr(u32 DistBaseAddress, u32 Int_Id,
+					u8 *Priority, u8 *Trigger);
+/************************** Variable Definitions *****************************/
+#ifdef __cplusplus
+}
+#endif
+
+#endif            /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_intr.c
new file mode 100644
index 000000000..d05a51c5e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_intr.c
@@ -0,0 +1,173 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xscugic_intr.c
+* @addtogroup scugic_v3_1
+* @{
+*
+* This file contains the interrupt processing for the driver for the Xilinx
+* Interrupt Controller.  The interrupt processing is partitioned separately such
+* that users are not required to use the provided interrupt processing.  This
+* file requires other files of the driver to be linked in also.
+*
+* The interrupt handler, XScuGic_InterruptHandler, uses an input argument which
+* is an instance pointer to an interrupt controller driver such that multiple
+* interrupt controllers can be supported.  This handler requires the calling
+* function to pass it the appropriate argument, so another level of indirection
+* may be required.
+*
+* The interrupt processing may be used by connecting the interrupt handler to
+* the interrupt system.  The handler does not save and restore the processor
+* context but only handles the processing of the Interrupt Controller. The user
+* is encouraged to supply their own interrupt handler when performance tuning is
+* deemed necessary.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------------
+* 1.00a drg  01/19/10 First release
+* 1.01a sdm  11/09/11 XScuGic_InterruptHandler has changed correspondingly
+*		      since the HandlerTable has now moved to XScuGic_Config.
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* 

+*
+* @internal
+*
+* This driver assumes that the context of the processor has been saved prior to
+* the calling of the Interrupt Controller interrupt handler and then restored
+* after the handler returns. This requires either the running RTOS to save the
+* state of the machine or that a wrapper be used as the destination of the
+* interrupt vector to save the state of the processor and restore the state
+* after the interrupt handler returns.
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xscugic.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+/*****************************************************************************/
+/**
+* This function is the primary interrupt handler for the driver.  It must be
+* connected to the interrupt source such that it is called when an interrupt of
+* the interrupt controller is active. It will resolve which interrupts are
+* active and enabled and call the appropriate interrupt handler. It uses
+* the Interrupt Type information to determine when to acknowledge the interrupt.
+* Highest priority interrupts are serviced first.
+*
+* This function assumes that an interrupt vector table has been previously
+* initialized.  It does not verify that entries in the table are valid before
+* calling an interrupt handler.
+*
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XScuGic_InterruptHandler(XScuGic *InstancePtr)
+{
+
+	u32 InterruptID;
+	    u32 IntIDFull;
+	    XScuGic_VectorTableEntry *TablePtr;
+
+	    /* Assert that the pointer to the instance is valid
+	     */
+	    Xil_AssertVoid(InstancePtr != NULL);
+
+	    /*
+	     * Read the int_ack register to identify the highest priority interrupt ID
+	     * and make sure it is valid. Reading Int_Ack will clear the interrupt
+	     * in the GIC.
+	     */
+	    IntIDFull = XScuGic_CPUReadReg(InstancePtr, XSCUGIC_INT_ACK_OFFSET);
+	    InterruptID = IntIDFull & XSCUGIC_ACK_INTID_MASK;
+
+	    if(XSCUGIC_MAX_NUM_INTR_INPUTS < InterruptID){
+		goto IntrExit;
+	    }
+
+	    /*
+	     * If the interrupt is shared, do some locking here if there are multiple
+	     * processors.
+	     */
+	    /*
+	     * If pre-eption is required:
+	     * Re-enable pre-emption by setting the CPSR I bit for non-secure ,
+	     * interrupts or the F bit for secure interrupts
+	     */
+
+	    /*
+	     * If we need to change security domains, issue a SMC instruction here.
+	     */
+
+	    /*
+	     * Execute the ISR. Jump into the Interrupt service routine based on the
+	     * IRQSource. A software trigger is cleared by the ACK.
+	     */
+	    TablePtr = &(InstancePtr->Config->HandlerTable[InterruptID]);
+		if(TablePtr != NULL) {
+	        TablePtr->Handler(TablePtr->CallBackRef);
+		}
+
+	IntrExit:
+	    /*
+	     * Write to the EOI register, we are all done here.
+	     * Let this function return, the boot code will restore the stack.
+	     */
+	    XScuGic_CPUWriteReg(InstancePtr, XSCUGIC_EOI_OFFSET, IntIDFull);
+
+	    /*
+	     * Return from the interrupt. Change security domains could happen here.
+     */
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_selftest.c
new file mode 100644
index 000000000..47620d644
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_selftest.c
@@ -0,0 +1,115 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xscugic_selftest.c
+* @addtogroup scugic_v3_1
+* @{
+*
+* Contains diagnostic self-test functions for the XScuGic driver.
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a drg  01/19/10 First release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xscugic.h"
+
+/************************** Constant Definitions *****************************/
+
+#define	XSCUGIC_PCELL_ID	0xB105F00DU
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+/*****************************************************************************/
+/**
+*
+* Run a self-test on the driver/device. This test reads the ID registers and
+* compares them.
+*
+* @param	InstancePtr is a pointer to the XScuGic instance.
+*
+* @return
+*
+* 		- XST_SUCCESS if self-test is successful.
+* 		- XST_FAILURE if the self-test is not successful.
+*
+* @note		None.
+*
+******************************************************************************/
+s32  XScuGic_SelfTest(XScuGic *InstancePtr)
+{
+	u32 RegValue1 = 0U;
+	u32 Index;
+	s32 Status;
+
+	/*
+	 * Assert the arguments
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the ID registers.
+	 */
+	for(Index=0U; Index<=3U; Index++) {
+		RegValue1 |= XScuGic_DistReadReg(InstancePtr,
+			((u32)XSCUGIC_PCELLID_OFFSET + (Index * 4U))) << (Index * 8U);
+	}
+
+	if(XSCUGIC_PCELL_ID != RegValue1){
+		Status = XST_FAILURE;
+	} else {
+		Status = XST_SUCCESS;
+	}
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_sinit.c
new file mode 100644
index 000000000..d30390ab8
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/scugic_v3_2/src/xscugic_sinit.c
@@ -0,0 +1,103 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xscugic_sinit.c
+* @addtogroup scugic_v3_1
+* @{
+*
+* Contains static init functions for the XScuGic driver for the Interrupt
+* Controller. See xscugic.h for a detailed description of the driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- --------------------------------------------------------
+* 1.00a drg  01/19/10 First release
+* 3.00  kvn  02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xparameters.h"
+#include "xscugic.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+extern XScuGic_Config XScuGic_ConfigTable[XPAR_SCUGIC_NUM_INSTANCES];
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+*
+* Looks up the device configuration based on the unique device ID. A table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId is the unique identifier for a device.
+*
+* @return	A pointer to the XScuGic configuration structure for the
+*		specified device, or NULL if the device was not found.
+*
+* @note		None.
+*
+******************************************************************************/
+XScuGic_Config *XScuGic_LookupConfig(u16 DeviceId)
+{
+	XScuGic_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index=0U; Index < (u32)XPAR_SCUGIC_NUM_INSTANCES; Index++) {
+		if (XScuGic_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XScuGic_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XScuGic_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/Makefile
new file mode 100644
index 000000000..f57081af6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xsdps_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling sdps"
+
+xsdps_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xsdps_includes
+
+xsdps_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps.c
new file mode 100644
index 000000000..6425a791b
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps.c
@@ -0,0 +1,1507 @@
+/******************************************************************************
+*
+* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsdps.c
+* @addtogroup sdps_v2_5
+* @{
+*
+* Contains the interface functions of the XSdPs driver.
+* See xsdps.h for a detailed description of the device and driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ---    -------- -----------------------------------------------
+* 1.00a hk/sg  10/17/13 Initial release
+* 2.0   hk     12/13/13 Added check for arm to use sleep.h and its API's
+* 2.1   hk     04/18/14 Add sleep for microblaze designs. CR# 781117.
+* 2.2   hk     07/28/14 Make changes to enable use of data cache.
+* 2.3   sk     09/23/14 Send command for relative card address
+*                       when re-initialization is done.CR# 819614.
+*						Use XSdPs_Change_ClkFreq API whenever changing
+*						clock.CR# 816586.
+* 2.4	sk	   12/04/14 Added support for micro SD without
+* 						WP/CD. CR# 810655.
+*						Checked for DAT Inhibit mask instead of CMD
+* 						Inhibit mask in Cmd Transfer API.
+*						Added Support for SD Card v1.0
+* 2.5 	sg	   07/09/15 Added SD 3.0 features
+*       kvn    07/15/15 Modified the code according to MISRAC-2012.
+* 2.6   sk     10/12/15 Added support for SD card v1.0 CR# 840601.
+* 2.7   sk     11/24/15 Considered the slot type befoe checking CD/WP pins.
+*       sk     12/10/15 Added support for MMC cards.
+*       sk     02/16/16 Corrected the Tuning logic.
+*       sk     03/01/16 Removed Bus Width check for eMMC. CR# 938311.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+#include "xsdps.h"
+/*
+ * The header sleep.h and API usleep() can only be used with an arm design.
+ * MB_Sleep() is used for microblaze design.
+ */
+#if defined (__arm__) || defined (__aarch64__)
+
+#include "sleep.h"
+
+#endif
+
+#ifdef __MICROBLAZE__
+
+#include "microblaze_sleep.h"
+
+#endif
+
+/************************** Constant Definitions *****************************/
+#define XSDPS_CMD8_VOL_PATTERN	0x1AAU
+#define XSDPS_RESPOCR_READY	0x80000000U
+#define XSDPS_ACMD41_HCS	0x40000000U
+#define XSDPS_ACMD41_3V3	0x00300000U
+#define XSDPS_CMD1_HIGH_VOL	0x00FF8000U
+#define XSDPS_CMD1_DUAL_VOL	0x00FF8010U
+#define HIGH_SPEED_SUPPORT	0x2U
+#define WIDTH_4_BIT_SUPPORT	0x4U
+#define SD_CLK_25_MHZ		25000000U
+#define SD_CLK_26_MHZ		26000000U
+#define EXT_CSD_DEVICE_TYPE_BYTE	196U
+#define EXT_CSD_DEVICE_TYPE_HIGH_SPEED			0x2U
+#define EXT_CSD_DEVICE_TYPE_DDR_1V8_HIGH_SPEED	0x4U
+#define EXT_CSD_DEVICE_TYPE_DDR_1V2_HIGH_SPEED	0x8U
+#define EXT_CSD_DEVICE_TYPE_SDR_1V8_HS200		0x10U
+#define EXT_CSD_DEVICE_TYPE_SDR_1V2_HS200		0x20U
+#define CSD_SPEC_VER_3		0x3U
+
+/* Note: Remove this once fixed */
+#define UHS_BROKEN
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+u32 XSdPs_FrameCmd(XSdPs *InstancePtr, u32 Cmd);
+s32 XSdPs_CmdTransfer(XSdPs *InstancePtr, u32 Cmd, u32 Arg, u32 BlkCnt);
+void XSdPs_SetupADMA2DescTbl(XSdPs *InstancePtr, u32 BlkCnt, const u8 *Buff);
+extern s32 XSdPs_Uhs_ModeInit(XSdPs *InstancePtr, u8 Mode);
+static s32 XSdPs_IdentifyCard(XSdPs *InstancePtr);
+static s32 XSdPs_Switch_Voltage(XSdPs *InstancePtr);
+
+/*****************************************************************************/
+/**
+*
+* Initializes a specific XSdPs instance such that the driver is ready to use.
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+* @param	ConfigPtr is a reference to a structure containing information
+*		about a specific SD device. This function initializes an
+*		InstancePtr object for a specific device specified by the
+*		contents of Config.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. The caller is responsible for keeping the address
+*		mapping from EffectiveAddr to the device physical base address
+*		unchanged once this function is invoked. Unexpected errors may
+*		occur if the address mapping changes after this function is
+*		called. If address translation is not used, use
+*		ConfigPtr->Config.BaseAddress for this device.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_DEVICE_IS_STARTED if the device is already started.
+*		It must be stopped to re-initialize.
+*
+* @note		This function initializes the host controller.
+*		Initial clock of 400KHz is set.
+*		Voltage of 3.3V is selected as that is supported by host.
+*		Interrupts status is enabled and signal disabled by default.
+*		Default data direction is card to host and
+*		32 bit ADMA2 is selected. Defualt Block size is 512 bytes.
+*
+******************************************************************************/
+s32 XSdPs_CfgInitialize(XSdPs *InstancePtr, XSdPs_Config *ConfigPtr,
+				u32 EffectiveAddr)
+{
+	s32 Status;
+	u8 PowerLevel;
+	u8 ReadReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+
+	/* Set some default values. */
+	InstancePtr->Config.BaseAddress = EffectiveAddr;
+	InstancePtr->Config.InputClockHz = ConfigPtr->InputClockHz;
+	InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+	InstancePtr->Config.CardDetect =  ConfigPtr->CardDetect;
+	InstancePtr->Config.WriteProtect =  ConfigPtr->WriteProtect;
+
+	/* Disable bus power */
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress,
+			XSDPS_POWER_CTRL_OFFSET, 0U);
+
+	/* Delay to poweroff card */
+#if defined (__arm__) || defined (__aarch64__)
+
+    (void)sleep(1U);
+
+#endif
+
+#ifdef __MICROBLAZE__
+
+    MB_Sleep(1000U);
+
+#endif
+
+	/* "Software reset for all" is initiated */
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress, XSDPS_SW_RST_OFFSET,
+			XSDPS_SWRST_ALL_MASK);
+
+	/* Proceed with initialization only after reset is complete */
+	ReadReg = XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+				XSDPS_SW_RST_OFFSET);
+	while ((ReadReg & XSDPS_SWRST_ALL_MASK) != 0U) {
+		ReadReg = XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+				XSDPS_SW_RST_OFFSET);
+	}
+	/* Host Controller version is read. */
+	 InstancePtr->HC_Version =
+			(u8)(XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL_VER_OFFSET) & XSDPS_HC_SPEC_VER_MASK);
+
+	/*
+	 * Read capabilities register and update it in Instance pointer.
+	 * It is sufficient to read this once on power on.
+	 */
+	InstancePtr->Host_Caps = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+						XSDPS_CAPS_OFFSET);
+
+	/* Select voltage and enable bus power. */
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress,
+			XSDPS_POWER_CTRL_OFFSET,
+			XSDPS_PC_BUS_VSEL_3V3_MASK | XSDPS_PC_BUS_PWR_MASK);
+
+	/* Change the clock frequency to 400 KHz */
+	Status = XSdPs_Change_ClkFreq(InstancePtr, XSDPS_CLK_400_KHZ);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH ;
+	}
+
+    if ((InstancePtr->Host_Caps & XSDPS_CAP_VOLT_3V3_MASK) != 0U) {
+		PowerLevel = XSDPS_PC_BUS_VSEL_3V3_MASK;
+	} else if ((InstancePtr->Host_Caps & XSDPS_CAP_VOLT_3V0_MASK) != 0U) {
+		PowerLevel = XSDPS_PC_BUS_VSEL_3V0_MASK;
+	} else if ((InstancePtr->Host_Caps & XSDPS_CAP_VOLT_1V8_MASK) != 0U) {
+		PowerLevel = XSDPS_PC_BUS_VSEL_1V8_MASK;
+	} else {
+		PowerLevel = 0U;
+	}
+
+	/* Select voltage based on capability and enable bus power. */
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress,
+			XSDPS_POWER_CTRL_OFFSET,
+			PowerLevel | XSDPS_PC_BUS_PWR_MASK);
+	/* Enable ADMA2 in 64bit mode. */
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL1_OFFSET,
+			XSDPS_HC_DMA_ADMA2_32_MASK);
+
+	/* Enable all interrupt status except card interrupt initially */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_EN_OFFSET,
+			XSDPS_NORM_INTR_ALL_MASK & (~XSDPS_INTR_CARD_MASK));
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_ERR_INTR_STS_EN_OFFSET,
+			XSDPS_ERROR_INTR_ALL_MASK);
+
+	/* Disable all interrupt signals by default. */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_SIG_EN_OFFSET, 0x0U);
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_ERR_INTR_SIG_EN_OFFSET, 0x0U);
+
+	/*
+	 * Transfer mode register - default value
+	 * DMA enabled, block count enabled, data direction card to host(read)
+	 */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_DMA_EN_MASK | XSDPS_TM_BLK_CNT_EN_MASK |
+			XSDPS_TM_DAT_DIR_SEL_MASK);
+
+	/* Set block size to 512 by default */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_BLK_SIZE_OFFSET, XSDPS_BLK_SIZE_512_MASK);
+
+	Status = XST_SUCCESS;
+
+RETURN_PATH:
+	return Status;
+
+}
+
+/*****************************************************************************/
+/**
+* SD initialization is done in this function
+*
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+*
+* @return
+* 		- XST_SUCCESS if initialization was successful
+* 		- XST_FAILURE if failure - could be because
+* 			a) SD is already initialized
+* 			b) There is no card inserted
+* 			c) One of the steps (commands) in the
+			   initialization cycle failed
+*
+* @note		This function initializes the SD card by following its
+*		initialization and identification state diagram.
+*		CMD0 is sent to reset card.
+*		CMD8 and ACDM41 are sent to identify voltage and
+*		high capacity support
+*		CMD2 and CMD3 are sent to obtain Card ID and
+*		Relative card address respectively.
+*		CMD9 is sent to read the card specific data.
+*
+******************************************************************************/
+s32 XSdPs_SdCardInitialize(XSdPs *InstancePtr)
+{
+	u32 PresentStateReg;
+	s32 Status;
+	u32 RespOCR;
+	u32 CSD[4];
+	u32 Arg;
+	u8 ReadReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	if ((InstancePtr->HC_Version != XSDPS_HC_SPEC_V3) ||
+				((InstancePtr->Host_Caps & XSDPS_CAPS_SLOT_TYPE_MASK)
+				!= XSDPS_CAPS_EMB_SLOT)) {
+		if(InstancePtr->Config.CardDetect != 0U) {
+			/*
+			 * Check the present state register to make sure
+			 * card is inserted and detected by host controller
+			 */
+			PresentStateReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XSDPS_PRES_STATE_OFFSET);
+			if ((PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK) == 0U)	{
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		}
+	}
+
+	/* CMD0 no response expected */
+	Status = XSdPs_CmdTransfer(InstancePtr, (u32)CMD0, 0U, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * CMD8; response expected
+	 * 0x1AA - Supply Voltage 2.7 - 3.6V and AA is pattern
+	 */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD8,
+			XSDPS_CMD8_VOL_PATTERN, 0U);
+	if ((Status != XST_SUCCESS) && (Status != XSDPS_CT_ERROR)) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	if (Status == XSDPS_CT_ERROR) {
+		 /* "Software reset for all" is initiated */
+		XSdPs_WriteReg8(InstancePtr->Config.BaseAddress, XSDPS_SW_RST_OFFSET,
+				XSDPS_SWRST_CMD_LINE_MASK);
+
+		/* Proceed with initialization only after reset is complete */
+		ReadReg = XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+						XSDPS_SW_RST_OFFSET);
+		while ((ReadReg & XSDPS_SWRST_CMD_LINE_MASK) != 0U) {
+			ReadReg = XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+						XSDPS_SW_RST_OFFSET);
+		}
+	}
+
+	RespOCR = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+						XSDPS_RESP0_OFFSET);
+	if (RespOCR != XSDPS_CMD8_VOL_PATTERN) {
+		InstancePtr->Card_Version = XSDPS_SD_VER_1_0;
+	}
+	else {
+		InstancePtr->Card_Version = XSDPS_SD_VER_2_0;
+	}
+
+	RespOCR = 0U;
+	/* Send ACMD41 while card is still busy with power up */
+	while ((RespOCR & XSDPS_RESPOCR_READY) == 0U) {
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD55, 0U, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+        Arg = XSDPS_ACMD41_HCS | XSDPS_ACMD41_3V3 | (0x1FFU << 15U);
+		if (InstancePtr->HC_Version == XSDPS_HC_SPEC_V3) {
+		    Arg |= XSDPS_OCR_S18;
+		}
+
+		/* 0x40300000 - Host High Capacity support & 3.3V window */
+		Status = XSdPs_CmdTransfer(InstancePtr, ACMD41,
+				Arg, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/* Response with card capacity */
+		RespOCR = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XSDPS_RESP0_OFFSET);
+
+	}
+
+	/* Update HCS support flag based on card capacity response */
+	if ((RespOCR & XSDPS_ACMD41_HCS) != 0U) {
+		InstancePtr->HCS = 1U;
+	}
+
+	/* There is no support to switch to 1.8V and use UHS mode on 1.0 silicon */
+#ifndef UHS_BROKEN
+    if ((RespOCR & XSDPS_OCR_S18) != 0U) {
+		InstancePtr->Switch1v8 = 1U;
+		Status = XSdPs_Switch_Voltage(InstancePtr);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+	}
+#endif
+
+	/* CMD2 for Card ID */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD2, 0U, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	InstancePtr->CardID[0] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+	InstancePtr->CardID[1] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP1_OFFSET);
+	InstancePtr->CardID[2] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP2_OFFSET);
+	InstancePtr->CardID[3] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP3_OFFSET);
+	do {
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD3, 0U, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/*
+		 * Relative card address is stored as the upper 16 bits
+		 * This is to avoid shifting when sending commands
+		 */
+		InstancePtr->RelCardAddr =
+				XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XSDPS_RESP0_OFFSET) & 0xFFFF0000U;
+	} while (InstancePtr->RelCardAddr == 0U);
+
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD9, (InstancePtr->RelCardAddr), 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * Card specific data is read.
+	 * Currently not used for any operation.
+	 */
+	CSD[0] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+	CSD[1] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP1_OFFSET);
+	CSD[2] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP2_OFFSET);
+	CSD[3] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP3_OFFSET);
+
+	Status = XST_SUCCESS;
+
+RETURN_PATH:
+	return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* Initialize Card with Identification mode sequence
+*
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+*
+* @return
+* 		- XST_SUCCESS if initialization was successful
+* 		- XST_FAILURE if failure - could be because
+* 			a) SD is already initialized
+* 			b) There is no card inserted
+* 			c) One of the steps (commands) in the
+*			   initialization cycle failed
+*
+*
+******************************************************************************/
+s32 XSdPs_CardInitialize(XSdPs *InstancePtr) {
+	u8 Tmp;
+	u32 Cnt;
+	u32 PresentStateReg;
+	u32 CtrlReg;
+	u32 CSD[4];
+#ifdef __ICCARM__
+#pragma data_alignment = 32
+static u8 ExtCsd[512];
+#pragma data_alignment = 4
+#else
+static u8 ExtCsd[512] __attribute__ ((aligned(32)));
+#endif
+	u8 SCR[8] = { 0U };
+	u8 ReadBuff[64] = { 0U };
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Default settings */
+	InstancePtr->BusWidth = XSDPS_1_BIT_WIDTH;
+	InstancePtr->CardType = XSDPS_CARD_SD;
+	InstancePtr->Switch1v8 = 0U;
+	InstancePtr->BusSpeed = XSDPS_CLK_400_KHZ;
+
+	if ((InstancePtr->HC_Version == XSDPS_HC_SPEC_V3) &&
+			((InstancePtr->Host_Caps & XSDPS_CAPS_SLOT_TYPE_MASK)
+			== XSDPS_CAPS_EMB_SLOT)) {
+		InstancePtr->CardType = XSDPS_CHIP_EMMC;
+	} else {
+		Status = XSdPs_IdentifyCard(InstancePtr);
+		if (Status == XST_FAILURE) {
+			goto RETURN_PATH;
+		}
+	}
+
+	if ((InstancePtr->CardType != XSDPS_CARD_SD) &&
+		(InstancePtr->CardType != XSDPS_CARD_MMC) &&
+		(InstancePtr->CardType != XSDPS_CHIP_EMMC)) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	if (InstancePtr->CardType == XSDPS_CARD_SD) {
+		Status = XSdPs_SdCardInitialize(InstancePtr);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/* Change clock to default clock 25MHz */
+		InstancePtr->BusSpeed = SD_CLK_25_MHZ;
+		Status = XSdPs_Change_ClkFreq(InstancePtr, InstancePtr->BusSpeed);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+	} else if ((InstancePtr->CardType == XSDPS_CARD_MMC)
+			|| (InstancePtr->CardType == XSDPS_CHIP_EMMC)) {
+		Status = XSdPs_MmcCardInitialize(InstancePtr);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+		/* Change clock to default clock 26MHz */
+		InstancePtr->BusSpeed = SD_CLK_26_MHZ;
+		Status = XSdPs_Change_ClkFreq(InstancePtr, InstancePtr->BusSpeed);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} else {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	Status = XSdPs_Select_Card(InstancePtr);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	if (InstancePtr->CardType == XSDPS_CARD_SD) {
+		/* Pull-up disconnected during data transfer */
+		Status = XSdPs_Pullup(InstancePtr);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		Status = XSdPs_Get_BusWidth(InstancePtr, SCR);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		if ((SCR[1] & WIDTH_4_BIT_SUPPORT) != 0U) {
+			Status = XSdPs_Change_BusWidth(InstancePtr);
+			if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		}
+
+		if ((InstancePtr->Switch1v8 != 0U) &&
+				(InstancePtr->BusWidth == XSDPS_4_BIT_WIDTH)) {
+			/* Set UHS-I SDR104 mode */
+			Status = XSdPs_Uhs_ModeInit(InstancePtr,
+					XSDPS_UHS_SPEED_MODE_SDR104);
+			if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+
+		} else {
+
+			/*
+			 * card supports CMD6 when SD_SPEC field in SCR register
+			 * indicates that the Physical Layer Specification Version
+			 * is 1.10 or later. So for SD v1.0 cmd6 is not supported.
+			 */
+			if (SCR[0] != 0U) {
+				/* Get speed supported by device */
+				Status = XSdPs_Get_BusSpeed(InstancePtr, ReadBuff);
+				if (Status != XST_SUCCESS) {
+					Status = XST_FAILURE;
+					goto RETURN_PATH;
+				}
+
+				/* Check for high speed support */
+				if ((ReadBuff[13] & HIGH_SPEED_SUPPORT) != 0U) {
+					Status = XSdPs_Change_BusSpeed(InstancePtr);
+					if (Status != XST_SUCCESS) {
+						Status = XST_FAILURE;
+						goto RETURN_PATH;
+					}
+				}
+			}
+		}
+
+	} else if (((InstancePtr->CardType == XSDPS_CARD_MMC) &&
+				(InstancePtr->Card_Version > CSD_SPEC_VER_3)) &&
+				(InstancePtr->HC_Version == XSDPS_HC_SPEC_V2)) {
+
+		Status = XSdPs_Change_BusWidth(InstancePtr);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		Status = XSdPs_Get_Mmc_ExtCsd(InstancePtr, ExtCsd);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		if ((ExtCsd[EXT_CSD_DEVICE_TYPE_BYTE] &
+				EXT_CSD_DEVICE_TYPE_HIGH_SPEED) != 0U) {
+			Status = XSdPs_Change_BusSpeed(InstancePtr);
+			if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+
+			Status = XSdPs_Get_Mmc_ExtCsd(InstancePtr, ExtCsd);
+			if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+
+			if (ExtCsd[EXT_CSD_HS_TIMING_BYTE] != EXT_CSD_HS_TIMING_HIGH) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		}
+	} else if (InstancePtr->CardType == XSDPS_CHIP_EMMC){
+		/* Change bus width to 8-bit */
+		Status = XSdPs_Change_BusWidth(InstancePtr);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/* Get Extended CSD */
+		Status = XSdPs_Get_Mmc_ExtCsd(InstancePtr, ExtCsd);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		if ((ExtCsd[EXT_CSD_DEVICE_TYPE_BYTE] &
+				(EXT_CSD_DEVICE_TYPE_SDR_1V8_HS200 |
+				EXT_CSD_DEVICE_TYPE_SDR_1V2_HS200)) != 0U) {
+			Status = XSdPs_Change_BusSpeed(InstancePtr);
+			if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+
+			Status = XSdPs_Get_Mmc_ExtCsd(InstancePtr, ExtCsd);
+			if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+
+			if (ExtCsd[EXT_CSD_HS_TIMING_BYTE] != EXT_CSD_HS_TIMING_HS200) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		}
+	}
+
+	Status = XSdPs_SetBlkSize(InstancePtr, XSDPS_BLK_SIZE_512_MASK);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+RETURN_PATH:
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* Identify type of card using CMD0 + CMD1 sequence
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+*
+******************************************************************************/
+static s32 XSdPs_IdentifyCard(XSdPs *InstancePtr)
+{
+	s32 Status;
+	u32 OperCondReg;
+	u8 ReadReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* 74 CLK delay after card is powered up, before the first command. */
+#if defined (__arm__) || defined (__aarch64__)
+
+	usleep(XSDPS_INIT_DELAY);
+
+#endif
+
+#ifdef __MICROBLAZE__
+
+	/* 2 msec delay */
+	MB_Sleep(2);
+
+#endif
+
+	/* CMD0 no response expected */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD0, 0U, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/* Host High Capacity support & High voltage window */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD1,
+			XSDPS_ACMD41_HCS | XSDPS_CMD1_HIGH_VOL, 0U);
+	if (Status != XST_SUCCESS) {
+		InstancePtr->CardType = XSDPS_CARD_SD;
+	} else {
+		InstancePtr->CardType = XSDPS_CARD_MMC;
+	}
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_NORM_INTR_ALL_MASK);
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_ERR_INTR_STS_OFFSET, XSDPS_ERROR_INTR_ALL_MASK);
+
+	/* "Software reset for all" is initiated */
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress, XSDPS_SW_RST_OFFSET,
+			XSDPS_SWRST_CMD_LINE_MASK);
+
+	/* Proceed with initialization only after reset is complete */
+	ReadReg = XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+					XSDPS_SW_RST_OFFSET);
+	while ((ReadReg & XSDPS_SWRST_CMD_LINE_MASK) != 0U) {
+		ReadReg = XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+					XSDPS_SW_RST_OFFSET);
+	}
+
+	Status = XST_SUCCESS;
+
+RETURN_PATH:
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* Switches the SD card voltage from 3v3 to 1v8
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+*
+******************************************************************************/
+static s32 XSdPs_Switch_Voltage(XSdPs *InstancePtr)
+{
+	s32 Status;
+	u16 CtrlReg;
+	u32 ReadReg;
+
+	/* Send switch voltage command */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD11, 0U, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+	}
+
+	/* Wait for CMD and DATA line to go low */
+	ReadReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XSDPS_PRES_STATE_OFFSET);
+	while ((ReadReg & (XSDPS_PSR_CMD_SG_LVL_MASK |
+					XSDPS_PSR_DAT30_SG_LVL_MASK)) != 0U) {
+		ReadReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XSDPS_PRES_STATE_OFFSET);
+	}
+
+	/* Stop the clock */
+	CtrlReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_CLK_CTRL_OFFSET);
+	CtrlReg &= ~(XSDPS_CC_SD_CLK_EN_MASK | XSDPS_CC_INT_CLK_EN_MASK);
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_CLK_CTRL_OFFSET,
+			CtrlReg);
+
+	/* Wait minimum 5mSec */
+#if defined (__arm__) || defined (__aarch64__)
+
+	(void)usleep(5000U);
+
+#endif
+
+#ifdef __MICROBLAZE__
+
+	MB_Sleep(5U);
+
+#endif
+
+	/* Enabling 1.8V in controller */
+	CtrlReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL2_OFFSET);
+	CtrlReg |= XSDPS_HC2_1V8_EN_MASK;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_HOST_CTRL2_OFFSET,
+			CtrlReg);
+
+	/* Start clock */
+	Status = XSdPs_Change_ClkFreq(InstancePtr, XSDPS_CLK_400_KHZ);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/* Wait for CMD and DATA line to go high */
+	ReadReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XSDPS_PRES_STATE_OFFSET);
+	while ((ReadReg & (XSDPS_PSR_CMD_SG_LVL_MASK | XSDPS_PSR_DAT30_SG_LVL_MASK))
+			!= (XSDPS_PSR_CMD_SG_LVL_MASK | XSDPS_PSR_DAT30_SG_LVL_MASK)) {
+		ReadReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XSDPS_PRES_STATE_OFFSET);
+	}
+
+RETURN_PATH:
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+
+* This function does SD command generation.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Cmd is the command to be sent.
+* @param	Arg is the argument to be sent along with the command.
+* 		This could be address or any other information
+* @param	BlkCnt - Block count passed by the user.
+*
+* @return
+* 		- XST_SUCCESS if initialization was successful
+* 		- XST_FAILURE if failure - could be because another transfer
+* 			is in progress or command or data inhibit is set
+*
+******************************************************************************/
+s32 XSdPs_CmdTransfer(XSdPs *InstancePtr, u32 Cmd, u32 Arg, u32 BlkCnt)
+{
+	u32 PresentStateReg;
+	u32 CommandReg;
+	u32 StatusReg;
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Check the command inhibit to make sure no other
+	 * command transfer is in progress
+	 */
+	PresentStateReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_PRES_STATE_OFFSET);
+	if ((PresentStateReg & XSDPS_PSR_INHIBIT_CMD_MASK) != 0U) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/* Write block count register */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_BLK_CNT_OFFSET, (u16)BlkCnt);
+
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress,
+			XSDPS_TIMEOUT_CTRL_OFFSET, 0xEU);
+
+	/* Write argument register */
+	XSdPs_WriteReg(InstancePtr->Config.BaseAddress,
+			XSDPS_ARGMT_OFFSET, Arg);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_NORM_INTR_ALL_MASK);
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_ERR_INTR_STS_OFFSET, XSDPS_ERROR_INTR_ALL_MASK);
+	/* Command register is set to trigger transfer of command */
+	CommandReg = XSdPs_FrameCmd(InstancePtr, Cmd);
+
+	/*
+	 * Mask to avoid writing to reserved bits 31-30
+	 * This is necessary because 0x80000000 is used  by this software to
+	 * distinguish between ACMD and CMD of same number
+	 */
+	CommandReg = CommandReg & 0x3FFFU;
+
+	/*
+	 * Check for data inhibit in case of command using DAT lines.
+	 * For Tuning Commands DAT lines check can be ignored.
+	 */
+	if ((Cmd != CMD21) && (Cmd != CMD19)) {
+		PresentStateReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XSDPS_PRES_STATE_OFFSET);
+		if (((PresentStateReg & (XSDPS_PSR_INHIBIT_DAT_MASK |
+									XSDPS_PSR_INHIBIT_DAT_MASK)) != 0U) &&
+				((CommandReg & XSDPS_DAT_PRESENT_SEL_MASK) != 0U)) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	}
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_CMD_OFFSET,
+			(u16)CommandReg);
+
+	/* Polling for response for now */
+	do {
+		StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET);
+		if ((Cmd == CMD21) || (Cmd == CMD19)) {
+			if ((XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET) & XSDPS_INTR_BRR_MASK) != 0U){
+				XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_BRR_MASK);
+				break;
+			}
+		}
+
+		if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+			Status = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+									XSDPS_ERR_INTR_STS_OFFSET);
+			if ((Status & ~XSDPS_INTR_ERR_CT_MASK) == 0) {
+				Status = XSDPS_CT_ERROR;
+			}
+			 /* Write to clear error bits */
+			XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_ERR_INTR_STS_OFFSET,
+					XSDPS_ERROR_INTR_ALL_MASK);
+			goto RETURN_PATH;
+		}
+	} while((StatusReg & XSDPS_INTR_CC_MASK) == 0U);
+	/* Write to clear bit */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET,
+			XSDPS_INTR_CC_MASK);
+
+	Status = XST_SUCCESS;
+
+RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+* This function frames the Command register for a particular command.
+* Note that this generates only the command register value i.e.
+* the upper 16 bits of the transfer mode and command register.
+* This value is already shifted to be upper 16 bits and can be directly
+* OR'ed with transfer mode register value.
+*
+* @param	Command to be sent.
+*
+* @return	Command register value complete with response type and
+* 		data, CRC and index related flags.
+*
+******************************************************************************/
+u32 XSdPs_FrameCmd(XSdPs *InstancePtr, u32 Cmd)
+{
+		u32 RetVal;
+
+		RetVal = Cmd;
+
+		switch(Cmd) {
+		case CMD0:
+			RetVal |= RESP_NONE;
+		break;
+		case CMD1:
+			RetVal |= RESP_R3;
+		break;
+		case CMD2:
+			RetVal |= RESP_R2;
+		break;
+		case CMD3:
+			RetVal |= RESP_R6;
+		break;
+		case CMD4:
+			RetVal |= RESP_NONE;
+			break;
+		case CMD5:
+			RetVal |= RESP_R1B;
+		break;
+		case CMD6:
+			if (InstancePtr->CardType == XSDPS_CARD_SD) {
+				RetVal |= RESP_R1 | (u32)XSDPS_DAT_PRESENT_SEL_MASK;
+			} else {
+				RetVal |= RESP_R1B;
+			}
+			break;
+		case ACMD6:
+			RetVal |= RESP_R1;
+		break;
+		case CMD7:
+			RetVal |= RESP_R1;
+		break;
+		case CMD8:
+			if (InstancePtr->CardType == XSDPS_CARD_SD) {
+				RetVal |= RESP_R1;
+			} else {
+				RetVal |= RESP_R1 | (u32)XSDPS_DAT_PRESENT_SEL_MASK;
+			}
+			break;
+		case CMD9:
+			RetVal |= RESP_R2;
+		break;
+		case CMD11:
+		case CMD10:
+		case CMD12:
+		case ACMD13:
+		case CMD16:
+			RetVal |= RESP_R1;
+		break;
+		case CMD17:
+		case CMD18:
+		case CMD19:
+		case CMD21:
+			RetVal |= RESP_R1 | (u32)XSDPS_DAT_PRESENT_SEL_MASK;
+		break;
+		case CMD23:
+		case ACMD23:
+		case CMD24:
+		case CMD25:
+			RetVal |= RESP_R1 | (u32)XSDPS_DAT_PRESENT_SEL_MASK;
+		case ACMD41:
+			RetVal |= RESP_R3;
+		break;
+		case ACMD42:
+			RetVal |= RESP_R1;
+		break;
+		case ACMD51:
+			RetVal |= RESP_R1 | (u32)XSDPS_DAT_PRESENT_SEL_MASK;
+		break;
+		case CMD52:
+		case CMD55:
+			RetVal |= RESP_R1;
+		break;
+		case CMD58:
+		break;
+		default :
+			RetVal |= Cmd;
+		break;
+		}
+
+		return RetVal;
+}
+
+/*****************************************************************************/
+/**
+* This function performs SD read in polled mode.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Arg is the address passed by the user that is to be sent as
+* 		argument along with the command.
+* @param	BlkCnt - Block count passed by the user.
+* @param	Buff - Pointer to the data buffer for a DMA transfer.
+*
+* @return
+* 		- XST_SUCCESS if initialization was successful
+* 		- XST_FAILURE if failure - could be because another transfer
+* 		is in progress or command or data inhibit is set
+*
+******************************************************************************/
+s32 XSdPs_ReadPolled(XSdPs *InstancePtr, u32 Arg, u32 BlkCnt, u8 *Buff)
+{
+	s32 Status;
+	u32 PresentStateReg;
+	u32 StatusReg;
+
+	if ((InstancePtr->HC_Version != XSDPS_HC_SPEC_V3) ||
+				((InstancePtr->Host_Caps & XSDPS_CAPS_SLOT_TYPE_MASK)
+				!= XSDPS_CAPS_EMB_SLOT)) {
+		if(InstancePtr->Config.CardDetect != 0U) {
+			/* Check status to ensure card is initialized */
+			PresentStateReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XSDPS_PRES_STATE_OFFSET);
+			if ((PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK) == 0x0U) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		}
+	}
+
+	/* Set block size to 512 if not already set */
+	if( XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_BLK_SIZE_OFFSET) != XSDPS_BLK_SIZE_512_MASK ) {
+		Status = XSdPs_SetBlkSize(InstancePtr,
+			XSDPS_BLK_SIZE_512_MASK);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	}
+
+	XSdPs_SetupADMA2DescTbl(InstancePtr, BlkCnt, Buff);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_AUTO_CMD12_EN_MASK |
+			XSDPS_TM_BLK_CNT_EN_MASK | XSDPS_TM_DAT_DIR_SEL_MASK |
+			XSDPS_TM_DMA_EN_MASK | XSDPS_TM_MUL_SIN_BLK_SEL_MASK);
+
+	Xil_DCacheInvalidateRange((INTPTR)Buff, BlkCnt * XSDPS_BLK_SIZE_512_MASK);
+
+	/* Send block read command */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD18, Arg, BlkCnt);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/* Check for transfer complete */
+	do {
+		StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET);
+		if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+			/* Write to clear error bits */
+			XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_ERR_INTR_STS_OFFSET,
+					XSDPS_ERROR_INTR_ALL_MASK);
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} while((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+	/* Write to clear bit */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+	Status = (s32)XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+
+	Status = XST_SUCCESS;
+
+RETURN_PATH:
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+* This function performs SD write in polled mode.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	Arg is the address passed by the user that is to be sent as
+* 		argument along with the command.
+* @param	BlkCnt - Block count passed by the user.
+* @param	Buff - Pointer to the data buffer for a DMA transfer.
+*
+* @return
+* 		- XST_SUCCESS if initialization was successful
+* 		- XST_FAILURE if failure - could be because another transfer
+* 		is in progress or command or data inhibit is set
+*
+******************************************************************************/
+s32 XSdPs_WritePolled(XSdPs *InstancePtr, u32 Arg, u32 BlkCnt, const u8 *Buff)
+{
+	s32 Status;
+	u32 PresentStateReg;
+	u32 StatusReg;
+
+	if ((InstancePtr->HC_Version != XSDPS_HC_SPEC_V3) ||
+				((InstancePtr->Host_Caps & XSDPS_CAPS_SLOT_TYPE_MASK)
+				!= XSDPS_CAPS_EMB_SLOT)) {
+		if(InstancePtr->Config.CardDetect != 0U) {
+			/* Check status to ensure card is initialized */
+			PresentStateReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XSDPS_PRES_STATE_OFFSET);
+			if ((PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK) == 0x0U) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		}
+	}
+
+	/* Set block size to 512 if not already set */
+	if( XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_BLK_SIZE_OFFSET) != XSDPS_BLK_SIZE_512_MASK ) {
+		Status = XSdPs_SetBlkSize(InstancePtr,
+			XSDPS_BLK_SIZE_512_MASK);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+	}
+
+	XSdPs_SetupADMA2DescTbl(InstancePtr, BlkCnt, Buff);
+	Xil_DCacheFlushRange((INTPTR)Buff, BlkCnt * XSDPS_BLK_SIZE_512_MASK);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_AUTO_CMD12_EN_MASK |
+			XSDPS_TM_BLK_CNT_EN_MASK |
+			XSDPS_TM_MUL_SIN_BLK_SEL_MASK | XSDPS_TM_DMA_EN_MASK);
+
+	/* Send block write command */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD25, Arg, BlkCnt);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * Check for transfer complete
+	 * Polling for response for now
+	 */
+	do {
+		StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET);
+		if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+			/* Write to clear error bits */
+			XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_ERR_INTR_STS_OFFSET,
+					XSDPS_ERROR_INTR_ALL_MASK);
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} while((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+	/* Write to clear bit */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* Selects card and sets default block size
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Select_Card (XSdPs *InstancePtr)
+{
+	s32 Status = 0;
+
+	/* Send CMD7 - Select card */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD7,
+			InstancePtr->RelCardAddr, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to setup ADMA2 descriptor table
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+* @param	BlkCnt - block count.
+* @param	Buff pointer to data buffer.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+void XSdPs_SetupADMA2DescTbl(XSdPs *InstancePtr, u32 BlkCnt, const u8 *Buff)
+{
+	u32 TotalDescLines = 0U;
+	u32 DescNum = 0U;
+	u32 BlkSize = 0U;
+
+	/* Setup ADMA2 - Write descriptor table and point ADMA SAR to it */
+	BlkSize = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_BLK_SIZE_OFFSET);
+	BlkSize = BlkSize & XSDPS_BLK_SIZE_MASK;
+
+	if((BlkCnt*BlkSize) < XSDPS_DESC_MAX_LENGTH) {
+
+		TotalDescLines = 1U;
+
+	}else {
+
+		TotalDescLines = ((BlkCnt*BlkSize) / XSDPS_DESC_MAX_LENGTH);
+		if (((BlkCnt * BlkSize) % XSDPS_DESC_MAX_LENGTH) != 0U) {
+			TotalDescLines += 1U;
+		}
+
+	}
+
+	for (DescNum = 0U; DescNum < (TotalDescLines-1); DescNum++) {
+		InstancePtr->Adma2_DescrTbl[DescNum].Address =
+				(u32)((UINTPTR)Buff + (DescNum*XSDPS_DESC_MAX_LENGTH));
+		InstancePtr->Adma2_DescrTbl[DescNum].Attribute =
+				XSDPS_DESC_TRAN | XSDPS_DESC_VALID;
+		/* This will write '0' to length field which indicates 65536 */
+		InstancePtr->Adma2_DescrTbl[DescNum].Length =
+				(u16)XSDPS_DESC_MAX_LENGTH;
+	}
+
+	InstancePtr->Adma2_DescrTbl[TotalDescLines-1].Address =
+			(u32)((UINTPTR)Buff + (DescNum*XSDPS_DESC_MAX_LENGTH));
+
+	InstancePtr->Adma2_DescrTbl[TotalDescLines-1].Attribute =
+			XSDPS_DESC_TRAN | XSDPS_DESC_END | XSDPS_DESC_VALID;
+
+	InstancePtr->Adma2_DescrTbl[TotalDescLines-1].Length =
+			(u16)((BlkCnt*BlkSize) - (DescNum*XSDPS_DESC_MAX_LENGTH));
+
+
+	XSdPs_WriteReg(InstancePtr->Config.BaseAddress, XSDPS_ADMA_SAR_OFFSET,
+			(u32)(UINTPTR)&(InstancePtr->Adma2_DescrTbl[0]));
+
+	Xil_DCacheFlushRange((INTPTR)&(InstancePtr->Adma2_DescrTbl[0]),
+			sizeof(XSdPs_Adma2Descriptor) * 32U);
+
+}
+
+/*****************************************************************************/
+/**
+* Mmc initialization is done in this function
+*
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+*
+* @return
+* 		- XST_SUCCESS if initialization was successful
+* 		- XST_FAILURE if failure - could be because
+* 			a) MMC is already initialized
+* 			b) There is no card inserted
+* 			c) One of the steps (commands) in the initialization
+*			   cycle failed
+* @note 	This function initializes the SD card by following its
+*		initialization and identification state diagram.
+*		CMD0 is sent to reset card.
+*		CMD1 sent to identify voltage and high capacity support
+*		CMD2 and CMD3 are sent to obtain Card ID and
+*		Relative card address respectively.
+*		CMD9 is sent to read the card specific data.
+*
+******************************************************************************/
+s32 XSdPs_MmcCardInitialize(XSdPs *InstancePtr)
+{
+	u32 PresentStateReg;
+	s32 Status;
+	u32 RespOCR;
+	u32 CSD[4];
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	if ((InstancePtr->HC_Version != XSDPS_HC_SPEC_V3) ||
+				((InstancePtr->Host_Caps & XSDPS_CAPS_SLOT_TYPE_MASK)
+				!= XSDPS_CAPS_EMB_SLOT)) {
+		if(InstancePtr->Config.CardDetect != 0U) {
+			/*
+			 * Check the present state register to make sure
+			 * card is inserted and detected by host controller
+			 */
+			PresentStateReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XSDPS_PRES_STATE_OFFSET);
+			if ((PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK) == 0U)	{
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		}
+	}
+
+	/* CMD0 no response expected */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD0, 0U, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	RespOCR = 0U;
+	/* Send CMD1 while card is still busy with power up */
+	while ((RespOCR & XSDPS_RESPOCR_READY) == 0U) {
+
+		/* Host High Capacity support & High volage window */
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD1,
+				XSDPS_ACMD41_HCS | XSDPS_CMD1_HIGH_VOL, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/* Response with card capacity */
+		RespOCR = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XSDPS_RESP0_OFFSET);
+
+	}
+
+	/* Update HCS support flag based on card capacity response */
+	if ((RespOCR & XSDPS_ACMD41_HCS) != 0U) {
+		InstancePtr->HCS = 1U;
+	}
+
+	/* CMD2 for Card ID */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD2, 0U, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	InstancePtr->CardID[0] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+	InstancePtr->CardID[1] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP1_OFFSET);
+	InstancePtr->CardID[2] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP2_OFFSET);
+	InstancePtr->CardID[3] =
+			XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP3_OFFSET);
+
+	/* Set relative card address */
+	InstancePtr->RelCardAddr = 0x12340000U;
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD3, (InstancePtr->RelCardAddr), 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD9, (InstancePtr->RelCardAddr), 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * Card specific data is read.
+	 * Currently not used for any operation.
+	 */
+	CSD[0] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+	CSD[1] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP1_OFFSET);
+	CSD[2] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP2_OFFSET);
+	CSD[3] = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP3_OFFSET);
+
+	InstancePtr->Card_Version =  (CSD[3] & CSD_SPEC_VER_MASK) >>18U;
+
+	Status = XST_SUCCESS;
+
+RETURN_PATH:
+	return Status;
+
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps.h
new file mode 100644
index 000000000..409653891
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps.h
@@ -0,0 +1,228 @@
+/******************************************************************************
+*
+* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsdps.h
+* @addtogroup sdps_v2_5
+* @{
+* @details
+*
+* This file contains the implementation of XSdPs driver.
+* This driver is used initialize read from and write to the SD card.
+* Features such as switching bus width to 4-bit and switching to high speed,
+* changing clock frequency, block size etc. are supported.
+* SD 2.0 uses 1/4 bus width and speeds of 25/50KHz. Initialization, however
+* is done using 1-bit bus width and 400KHz clock frequency.
+* SD commands are classified as broadcast and addressed. Commands can be
+* those with response only (using only command line) or
+* response + data (using command and data lines).
+* Only one command can be sent at a time. During a data transfer however,
+* when dsta lines are in use, certain commands (which use only the command
+* line) can be sent, most often to obtain status.
+* This driver does not support multi card slots at present.
+*
+* Intialization:
+* This includes initialization on the host controller side to select
+* clock frequency, bus power and default transfer related parameters.
+* The default voltage is 3.3V.
+* On the SD card side, the initialization and identification state diagram is
+* implemented. This resets the card, gives it a unique address/ID and
+* identifies key card related specifications.
+*
+* Data transfer:
+* The SD card is put in tranfer state to read from or write to it.
+* The default block size is 512 bytes and if supported,
+* default bus width is 4-bit and bus speed is High speed.
+* The read and write functions are implemented in polled mode using ADMA2.
+*
+* At any point, when key parameters such as block size or
+* clock/speed or bus width are modified, this driver takes care of
+* maintaining the same selection on host and card.
+* All error bits in host controller are monitored by the driver and in the
+* event one of them is set, driver will clear the interrupt status and
+* communicate failure to the upper layer.
+*
+* File system use:
+* This driver can be used with xilffs library to read and write files to SD.
+* (Please refer to procedure in diskio.c). The file system read/write example
+* in polled mode can used for reference.
+*
+* There is no example for using SD driver without file system at present.
+* However, the driver can be used without the file system. The glue layer
+* in filesytem can be used as reference for the same. The block count
+* passed to the read/write function in one call is limited by the ADMA2
+* descriptor table and hence care will have to be taken to call read/write
+* API's in a loop for large file sizes.
+*
+* Interrupt mode is not supported because it offers no improvement when used
+* with file system.
+*
+* eMMC support:
+* SD driver supports SD and eMMC based on the "enable MMC" parameter in SDK.
+* The features of eMMC supported by the driver will depend on those supported
+* by the host controller. The current driver supports read/write on eMMC card
+* using 4-bit and high speed mode currently.
+*
+* Features not supported include - card write protect, password setting,
+* lock/unlock, interrupts, SDMA mode, programmed I/O mode and
+* 64-bit addressed ADMA2, erase/pre-erase commands.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ---    -------- -----------------------------------------------
+* 1.00a hk/sg  10/17/13 Initial release
+* 2.0   hk      03/07/14 Version number revised.
+* 2.1   hk     04/18/14 Increase sleep for eMMC switch command.
+*                       Add sleep for microblaze designs. CR# 781117.
+* 2.2   hk     07/28/14 Make changes to enable use of data cache.
+* 2.3   sk     09/23/14 Send command for relative card address
+*                       when re-initialization is done.CR# 819614.
+*						Use XSdPs_Change_ClkFreq API whenever changing
+*						clock.CR# 816586.
+* 2.4	sk	   12/04/14 Added support for micro SD without
+* 						WP/CD. CR# 810655.
+*						Checked for DAT Inhibit mask instead of CMD
+* 						Inhibit mask in Cmd Transfer API.
+*						Added Support for SD Card v1.0
+* 2.5 	sg		07/09/15 Added SD 3.0 features
+*       kvn     07/15/15 Modified the code according to MISRAC-2012.
+* 2.6   sk     10/12/15 Added support for SD card v1.0 CR# 840601.
+* 2.7   sk     11/24/15 Considered the slot type befoe checking CD/WP pins.
+*       sk     12/10/15 Added support for MMC cards.
+*              01/08/16 Added workaround for issue in auto tuning mode
+*                       of SDR50, SDR104 and HS200.
+*       sk     02/16/16 Corrected the Tuning logic.
+*       sk     03/01/16 Removed Bus Width check for eMMC. CR# 938311.
+*
+* 

+*
+******************************************************************************/
+
+
+#ifndef SDPS_H_
+#define SDPS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "xil_printf.h"
+#include "xil_cache.h"
+#include "xstatus.h"
+#include "xsdps_hw.h"
+#include 
+
+/************************** Constant Definitions *****************************/
+
+#define XSDPS_CT_ERROR	0x2U	/**< Command timeout flag */
+#define MAX_TUNING_COUNT	40U		/**< Maximum Tuning count */
+
+/**************************** Type Definitions *******************************/
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct {
+	u16 DeviceId;			/**< Unique ID  of device */
+	u32 BaseAddress;		/**< Base address of the device */
+	u32 InputClockHz;		/**< Input clock frequency */
+	u32 CardDetect;			/**< Card Detect */
+	u32 WriteProtect;			/**< Write Protect */
+} XSdPs_Config;
+
+/* ADMA2 descriptor table */
+typedef struct {
+	u16 Attribute;		/**< Attributes of descriptor */
+	u16 Length;		/**< Length of current dma transfer */
+	u32 Address;		/**< Address of current dma transfer */
+} XSdPs_Adma2Descriptor;
+
+/**
+ * The XSdPs driver instance data. The user is required to allocate a
+ * variable of this type for every SD device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+	XSdPs_Config Config;	/**< Configuration structure */
+	u32 IsReady;		/**< Device is initialized and ready */
+	u32 Host_Caps;		/**< Capabilities of host controller */
+	u32 Host_CapsExt;	/**< Extended Capabilities */
+	u32 HCS;		/**< High capacity support in card */
+	u8  CardType;		/**< Type of card - SD/MMC/eMMC */
+	u8  Card_Version;	/**< Card version */
+	u8  HC_Version;		/**< Host controller version */
+	u8  BusWidth;		/**< Current operating bus width */
+	u32 BusSpeed;		/**< Current operating bus speed */
+	u8  Switch1v8;		/**< 1.8V Switch support */
+	u32 CardID[4];		/**< Card ID Register */
+	u32 RelCardAddr;	/**< Relative Card Address */
+	u32 CardSpecData[4];	/**< Card Specific Data Register */
+	u32 SdCardConfig;	/**< Sd Card Configuration Register */
+	/**< ADMA Descriptors */
+#ifdef __ICCARM__
+#pragma data_alignment = 32
+	XSdPs_Adma2Descriptor Adma2_DescrTbl[32];
+#pragma data_alignment = 4
+#else
+	XSdPs_Adma2Descriptor Adma2_DescrTbl[32] __attribute__ ((aligned(32)));
+#endif
+} XSdPs;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+XSdPs_Config *XSdPs_LookupConfig(u16 DeviceId);
+s32 XSdPs_CfgInitialize(XSdPs *InstancePtr, XSdPs_Config *ConfigPtr,
+				u32 EffectiveAddr);
+s32 XSdPs_SdCardInitialize(XSdPs *InstancePtr);
+s32 XSdPs_ReadPolled(XSdPs *InstancePtr, u32 Arg, u32 BlkCnt, u8 *Buff);
+s32 XSdPs_WritePolled(XSdPs *InstancePtr, u32 Arg, u32 BlkCnt, const u8 *Buff);
+s32 XSdPs_SetBlkSize(XSdPs *InstancePtr, u16 BlkSize);
+s32 XSdPs_Select_Card (XSdPs *InstancePtr);
+s32 XSdPs_Change_ClkFreq(XSdPs *InstancePtr, u32 SelFreq);
+s32 XSdPs_Change_BusWidth(XSdPs *InstancePtr);
+s32 XSdPs_Change_BusSpeed(XSdPs *InstancePtr);
+s32 XSdPs_Get_BusWidth(XSdPs *InstancePtr, u8 *SCR);
+s32 XSdPs_Get_BusSpeed(XSdPs *InstancePtr, u8 *ReadBuff);
+s32 XSdPs_Pullup(XSdPs *InstancePtr);
+s32 XSdPs_MmcCardInitialize(XSdPs *InstancePtr);
+s32 XSdPs_CardInitialize(XSdPs *InstancePtr);
+s32 XSdPs_Get_Mmc_ExtCsd(XSdPs *InstancePtr, u8 *ReadBuff);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SD_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_g.c
new file mode 100644
index 000000000..b5d2e4be8
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_g.c
@@ -0,0 +1,58 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xsdps.h"
+
+/*
+* The configuration table for devices
+*/
+
+XSdPs_Config XSdPs_ConfigTable[] =
+{
+	{
+		XPAR_PSU_SD_1_DEVICE_ID,
+		XPAR_PSU_SD_1_BASEADDR,
+		XPAR_PSU_SD_1_SDIO_CLK_FREQ_HZ,
+		XPAR_PSU_SD_1_HAS_CD,
+		XPAR_PSU_SD_1_HAS_WP
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_hw.h
new file mode 100644
index 000000000..c797e8216
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_hw.h
@@ -0,0 +1,1186 @@
+/******************************************************************************
+*
+* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsdps_hw.h
+* @addtogroup sdps_v2_5
+* @{
+*
+* This header file contains the identifiers and basic HW access driver
+* functions (or  macros) that can be used to access the device. Other driver
+* functions are defined in xsdps.h.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ---    -------- -----------------------------------------------
+* 1.00a hk/sg  10/17/13 Initial release
+* 2.5 	sg	   07/09/15 Added SD 3.0 features
+*       kvn    07/15/15 Modified the code according to MISRAC-2012.
+* 2.7   sk     12/10/15 Added support for MMC cards.
+*       sk     03/02/16 Configured the Tap Delay values for eMMC HS200 mode.
+* 

+*
+******************************************************************************/
+
+#ifndef SD_HW_H_
+#define SD_HW_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Register Map
+ *
+ * Register offsets from the base address of an SD device.
+ * @{
+ */
+
+#define XSDPS_SDMA_SYS_ADDR_OFFSET	0x00U	/**< SDMA System Address
+							Register */
+#define XSDPS_SDMA_SYS_ADDR_LO_OFFSET	XSDPS_SDMA_SYS_ADDR_OFFSET
+						/**< SDMA System Address
+							Low Register */
+#define XSDPS_ARGMT2_LO_OFFSET		0x00U	/**< Argument2 Low Register */
+#define XSDPS_SDMA_SYS_ADDR_HI_OFFSET	0x02U	/**< SDMA System Address
+							High Register */
+#define XSDPS_ARGMT2_HI_OFFSET		0x02U	/**< Argument2 High Register */
+
+#define XSDPS_BLK_SIZE_OFFSET		0x04U	/**< Block Size Register */
+#define XSDPS_BLK_CNT_OFFSET		0x06U	/**< Block Count Register */
+#define XSDPS_ARGMT_OFFSET		0x08U	/**< Argument Register */
+#define XSDPS_ARGMT1_LO_OFFSET		XSDPS_ARGMT_OFFSET
+						/**< Argument1 Register */
+#define XSDPS_ARGMT1_HI_OFFSET		0x0AU	/**< Argument1 Register */
+
+#define XSDPS_XFER_MODE_OFFSET		0x0CU	/**< Transfer Mode Register */
+#define XSDPS_CMD_OFFSET		0x0EU	/**< Command Register */
+#define XSDPS_RESP0_OFFSET		0x10U	/**< Response0 Register */
+#define XSDPS_RESP1_OFFSET		0x14U	/**< Response1 Register */
+#define XSDPS_RESP2_OFFSET		0x18U	/**< Response2 Register */
+#define XSDPS_RESP3_OFFSET		0x1CU	/**< Response3 Register */
+#define XSDPS_BUF_DAT_PORT_OFFSET	0x20U	/**< Buffer Data Port */
+#define XSDPS_PRES_STATE_OFFSET		0x24U	/**< Present State */
+#define XSDPS_HOST_CTRL1_OFFSET		0x28U	/**< Host Control 1 */
+#define XSDPS_POWER_CTRL_OFFSET		0x29U	/**< Power Control */
+#define XSDPS_BLK_GAP_CTRL_OFFSET	0x2AU	/**< Block Gap Control */
+#define XSDPS_WAKE_UP_CTRL_OFFSET	0x2BU	/**< Wake Up Control */
+#define XSDPS_CLK_CTRL_OFFSET		0x2CU	/**< Clock Control */
+#define XSDPS_TIMEOUT_CTRL_OFFSET	0x2EU	/**< Timeout Control */
+#define XSDPS_SW_RST_OFFSET		0x2FU	/**< Software Reset */
+#define XSDPS_NORM_INTR_STS_OFFSET 	0x30U	/**< Normal Interrupt
+							Status Register */
+#define XSDPS_ERR_INTR_STS_OFFSET 	0x32U	/**< Error Interrupt
+							Status Register */
+#define XSDPS_NORM_INTR_STS_EN_OFFSET	0x34U	/**< Normal Interrupt
+						Status Enable Register */
+#define XSDPS_ERR_INTR_STS_EN_OFFSET	0x36U	/**< Error Interrupt
+						Status Enable Register */
+#define XSDPS_NORM_INTR_SIG_EN_OFFSET	0x38U	/**< Normal Interrupt
+						Signal Enable Register */
+#define XSDPS_ERR_INTR_SIG_EN_OFFSET	0x3AU	/**< Error Interrupt
+						Signal Enable Register */
+
+#define XSDPS_AUTO_CMD12_ERR_STS_OFFSET	0x3CU	/**< Auto CMD12 Error Status
+							Register */
+#define XSDPS_HOST_CTRL2_OFFSET		0x3EU	/**< Host Control2 Register */
+#define XSDPS_CAPS_OFFSET 		0x40U	/**< Capabilities Register */
+#define XSDPS_CAPS_EXT_OFFSET 		0x44U	/**< Capabilities Extended */
+#define XSDPS_MAX_CURR_CAPS_OFFSET	0x48U	/**< Maximum Current
+						Capabilities Register */
+#define XSDPS_MAX_CURR_CAPS_EXT_OFFSET	0x4CU	/**< Maximum Current
+						Capabilities Ext Register */
+#define XSDPS_FE_ERR_INT_STS_OFFSET	0x52U	/**< Force Event for
+						Error Interrupt Status */
+#define XSDPS_FE_AUTO_CMD12_EIS_OFFSET	0x50U	/**< Auto CM12 Error Interrupt
+							Status Register */
+#define XSDPS_ADMA_ERR_STS_OFFSET	0x54U	/**< ADMA Error Status
+							Register */
+#define XSDPS_ADMA_SAR_OFFSET		0x58U	/**< ADMA System Address
+							Register */
+#define XSDPS_ADMA_SAR_EXT_OFFSET	0x5CU	/**< ADMA System Address
+							Extended Register */
+#define XSDPS_PRE_VAL_1_OFFSET		0x60U	/**< Preset Value Register */
+#define XSDPS_PRE_VAL_2_OFFSET		0x64U	/**< Preset Value Register */
+#define XSDPS_PRE_VAL_3_OFFSET		0x68U	/**< Preset Value Register */
+#define XSDPS_PRE_VAL_4_OFFSET		0x6CU	/**< Preset Value Register */
+#define XSDPS_BOOT_TOUT_CTRL_OFFSET	0x70U	/**< Boot timeout control
+							register */
+
+#define XSDPS_SHARED_BUS_CTRL_OFFSET	0xE0U	/**< Shared Bus Control
+							Register */
+#define XSDPS_SLOT_INTR_STS_OFFSET	0xFCU	/**< Slot Interrupt Status
+							Register */
+#define XSDPS_HOST_CTRL_VER_OFFSET	0xFEU	/**< Host Controller Version
+							Register */
+
+/* @} */
+
+/** @name Control Register - Host control, Power control,
+ * 			Block Gap control and Wakeup control
+ *
+ * This register contains bits for various configuration options of
+ * the SD host controller. Read/Write apart from the reserved bits.
+ * @{
+ */
+
+#define XSDPS_HC_LED_MASK		0x00000001U /**< LED Control */
+#define XSDPS_HC_WIDTH_MASK		0x00000002U /**< Bus width */
+#define XSDPS_HC_BUS_WIDTH_4		0x00000002U
+#define XSDPS_HC_SPEED_MASK		0x00000004U /**< High Speed */
+#define XSDPS_HC_DMA_MASK		0x00000018U /**< DMA Mode Select */
+#define XSDPS_HC_DMA_SDMA_MASK		0x00000000U /**< SDMA Mode */
+#define XSDPS_HC_DMA_ADMA1_MASK		0x00000008U /**< ADMA1 Mode */
+#define XSDPS_HC_DMA_ADMA2_32_MASK	0x00000010U /**< ADMA2 Mode - 32 bit */
+#define XSDPS_HC_DMA_ADMA2_64_MASK	0x00000018U /**< ADMA2 Mode - 64 bit */
+#define XSDPS_HC_EXT_BUS_WIDTH		0x00000020U /**< Bus width - 8 bit */
+#define XSDPS_HC_CARD_DET_TL_MASK	0x00000040U /**< Card Detect Tst Lvl */
+#define XSDPS_HC_CARD_DET_SD_MASK	0x00000080U /**< Card Detect Sig Det */
+
+#define XSDPS_PC_BUS_PWR_MASK		0x00000001U /**< Bus Power Control */
+#define XSDPS_PC_BUS_VSEL_MASK		0x0000000EU /**< Bus Voltage Select */
+#define XSDPS_PC_BUS_VSEL_3V3_MASK	0x0000000EU /**< Bus Voltage 3.3V */
+#define XSDPS_PC_BUS_VSEL_3V0_MASK	0x0000000CU /**< Bus Voltage 3.0V */
+#define XSDPS_PC_BUS_VSEL_1V8_MASK	0x0000000AU /**< Bus Voltage 1.8V */
+#define XSDPS_PC_EMMC_HW_RST_MASK	0x00000010U /**< HW reset for eMMC */
+
+#define XSDPS_BGC_STP_REQ_MASK		0x00000001U /**< Block Gap Stop Req */
+#define XSDPS_BGC_CNT_REQ_MASK		0x00000002U /**< Block Gap Cont Req */
+#define XSDPS_BGC_RWC_MASK		0x00000004U /**< Block Gap Rd Wait */
+#define XSDPS_BGC_INTR_MASK		0x00000008U /**< Block Gap Intr */
+#define XSDPS_BGC_SPI_MODE_MASK		0x00000010U /**< Block Gap SPI Mode */
+#define XSDPS_BGC_BOOT_EN_MASK		0x00000020U /**< Block Gap Boot Enb */
+#define XSDPS_BGC_ALT_BOOT_EN_MASK	0x00000040U /**< Block Gap Alt BootEn */
+#define XSDPS_BGC_BOOT_ACK_MASK		0x00000080U /**< Block Gap Boot Ack */
+
+#define XSDPS_WC_WUP_ON_INTR_MASK	0x00000001U /**< Wakeup Card Intr */
+#define XSDPS_WC_WUP_ON_INSRT_MASK	0x00000002U /**< Wakeup Card Insert */
+#define XSDPS_WC_WUP_ON_REM_MASK	0x00000004U /**< Wakeup Card Removal */
+
+/* @} */
+
+/** @name Control Register - Clock control, Timeout control & Software reset
+ *
+ * This register contains bits for configuration options of clock, timeout and
+ * software reset.
+ * Read/Write except for Inter_Clock_Stable bit (read only) and reserved bits.
+ * @{
+ */
+
+#define XSDPS_CC_INT_CLK_EN_MASK		0x00000001U
+#define XSDPS_CC_INT_CLK_STABLE_MASK	0x00000002U
+#define XSDPS_CC_SD_CLK_EN_MASK			0x00000004U
+#define XSDPS_CC_SD_CLK_GEN_SEL_MASK		0x00000020U
+#define XSDPS_CC_SDCLK_FREQ_SEL_EXT_MASK	0x000000C0U
+#define XSDPS_CC_SDCLK_FREQ_SEL_MASK		0x0000FF00U
+#define XSDPS_CC_SDCLK_FREQ_D256_MASK		0x00008000U
+#define XSDPS_CC_SDCLK_FREQ_D128_MASK		0x00004000U
+#define XSDPS_CC_SDCLK_FREQ_D64_MASK		0x00002000U
+#define XSDPS_CC_SDCLK_FREQ_D32_MASK		0x00001000U
+#define XSDPS_CC_SDCLK_FREQ_D16_MASK		0x00000800U
+#define XSDPS_CC_SDCLK_FREQ_D8_MASK		0x00000400U
+#define XSDPS_CC_SDCLK_FREQ_D4_MASK		0x00000200U
+#define XSDPS_CC_SDCLK_FREQ_D2_MASK		0x00000100U
+#define XSDPS_CC_SDCLK_FREQ_BASE_MASK	0x00000000U
+#define XSDPS_CC_MAX_DIV_CNT			256U
+#define XSDPS_CC_EXT_MAX_DIV_CNT		2046U
+#define XSDPS_CC_EXT_DIV_SHIFT			6U
+
+#define XSDPS_TC_CNTR_VAL_MASK			0x0000000FU
+
+#define XSDPS_SWRST_ALL_MASK			0x00000001U
+#define XSDPS_SWRST_CMD_LINE_MASK		0x00000002U
+#define XSDPS_SWRST_DAT_LINE_MASK		0x00000004U
+
+#define XSDPS_CC_MAX_NUM_OF_DIV		9U
+#define XSDPS_CC_DIV_SHIFT		8U
+
+/* @} */
+
+/** @name SD Interrupt Registers
+ *
+ *  Normal and Error Interrupt Status Register 
+ * This register shows the normal and error interrupt status.
+ * Status enable register affects reads of this register.
+ * If Signal enable register is set and the corresponding status bit is set,
+ * interrupt is generated.
+ * Write to clear except
+ * Error_interrupt and Card_Interrupt bits - Read only
+ *
+ *  Normal and Error Interrupt Status Enable Register 
+ * Setting this register bits enables Interrupt status.
+ * Read/Write except Fixed_to_0 bit (Read only)
+ *
+ *  Normal and Error Interrupt Signal Enable Register 
+ * This register is used to select which interrupt status is
+ * indicated to the Host System as the interrupt.
+ * Read/Write except Fixed_to_0 bit (Read only)
+ *
+ * All three registers have same bit definitions
+ * @{
+ */
+
+#define XSDPS_INTR_CC_MASK		0x00000001U /**< Command Complete */
+#define XSDPS_INTR_TC_MASK		0x00000002U /**< Transfer Complete */
+#define XSDPS_INTR_BGE_MASK		0x00000004U /**< Block Gap Event */
+#define XSDPS_INTR_DMA_MASK		0x00000008U /**< DMA Interrupt */
+#define XSDPS_INTR_BWR_MASK		0x00000010U /**< Buffer Write Ready */
+#define XSDPS_INTR_BRR_MASK		0x00000020U /**< Buffer Read Ready */
+#define XSDPS_INTR_CARD_INSRT_MASK	0x00000040U /**< Card Insert */
+#define XSDPS_INTR_CARD_REM_MASK	0x00000080U /**< Card Remove */
+#define XSDPS_INTR_CARD_MASK		0x00000100U /**< Card Interrupt */
+#define XSDPS_INTR_INT_A_MASK		0x00000200U /**< INT A Interrupt */
+#define XSDPS_INTR_INT_B_MASK		0x00000400U /**< INT B Interrupt */
+#define XSDPS_INTR_INT_C_MASK		0x00000800U /**< INT C Interrupt */
+#define XSDPS_INTR_RE_TUNING_MASK	0x00001000U /**< Re-Tuning Interrupt */
+#define XSDPS_INTR_BOOT_ACK_RECV_MASK	0x00002000U /**< Boot Ack Recv
+							Interrupt */
+#define XSDPS_INTR_BOOT_TERM_MASK	0x00004000U /**< Boot Terminate
+							Interrupt */
+#define XSDPS_INTR_ERR_MASK		0x00008000U /**< Error Interrupt */
+#define XSDPS_NORM_INTR_ALL_MASK	0x0000FFFFU
+
+#define XSDPS_INTR_ERR_CT_MASK		0x00000001U /**< Command Timeout
+							Error */
+#define XSDPS_INTR_ERR_CCRC_MASK	0x00000002U /**< Command CRC Error */
+#define XSDPS_INTR_ERR_CEB_MASK		0x00000004U /**< Command End Bit
+							Error */
+#define XSDPS_INTR_ERR_CI_MASK		0x00000008U /**< Command Index Error */
+#define XSDPS_INTR_ERR_DT_MASK		0x00000010U /**< Data Timeout Error */
+#define XSDPS_INTR_ERR_DCRC_MASK	0x00000020U /**< Data CRC Error */
+#define XSDPS_INTR_ERR_DEB_MASK		0x00000040U /**< Data End Bit Error */
+#define XSDPS_INTR_ERR_CUR_LMT_MASK	0x00000080U /**< Current Limit Error */
+#define XSDPS_INTR_ERR_AUTO_CMD12_MASK	0x00000100U /**< Auto CMD12 Error */
+#define XSDPS_INTR_ERR_ADMA_MASK	0x00000200U /**< ADMA Error */
+#define XSDPS_INTR_ERR_TR_MASK		0x00001000U /**< Tuning Error */
+#define XSDPS_INTR_VEND_SPF_ERR_MASK	0x0000E000U /**< Vendor Specific
+							Error */
+#define XSDPS_ERROR_INTR_ALL_MASK	0x0000F3FFU /**< Mask for error bits */
+/* @} */
+
+/** @name Block Size and Block Count Register
+ *
+ * This register contains the block count for current transfer,
+ * block size and SDMA buffer size.
+ * Read/Write except for reserved bits.
+ * @{
+ */
+
+#define XSDPS_BLK_SIZE_MASK		0x00000FFFU /**< Transfer Block Size */
+#define XSDPS_SDMA_BUFF_SIZE_MASK	0x00007000U /**< Host SDMA Buffer Size */
+#define XSDPS_BLK_SIZE_1024		0x400U
+#define XSDPS_BLK_SIZE_2048		0x800U
+#define XSDPS_BLK_CNT_MASK		0x0000FFFFU /**< Block Count for
+								Current Transfer */
+
+/* @} */
+
+/** @name Transfer Mode and Command Register
+ *
+ * The Transfer Mode register is used to control the data transfers and
+ * Command register is used for command generation
+ * Read/Write except for reserved bits.
+ * @{
+ */
+
+#define XSDPS_TM_DMA_EN_MASK		0x00000001U /**< DMA Enable */
+#define XSDPS_TM_BLK_CNT_EN_MASK	0x00000002U /**< Block Count Enable */
+#define XSDPS_TM_AUTO_CMD12_EN_MASK	0x00000004U /**< Auto CMD12 Enable */
+#define XSDPS_TM_DAT_DIR_SEL_MASK	0x00000010U /**< Data Transfer
+							Direction Select */
+#define XSDPS_TM_MUL_SIN_BLK_SEL_MASK	0x00000020U /**< Multi/Single
+							Block Select */
+
+#define XSDPS_CMD_RESP_SEL_MASK		0x00000003U /**< Response Type
+							Select */
+#define XSDPS_CMD_RESP_NONE_MASK	0x00000000U /**< No Response */
+#define XSDPS_CMD_RESP_L136_MASK	0x00000001U /**< Response length 138 */
+#define XSDPS_CMD_RESP_L48_MASK		0x00000002U /**< Response length 48 */
+#define XSDPS_CMD_RESP_L48_BSY_CHK_MASK	0x00000003U /**< Response length 48 &
+							check busy after
+							response */
+#define XSDPS_CMD_CRC_CHK_EN_MASK	0x00000008U /**< Command CRC Check
+							Enable */
+#define XSDPS_CMD_INX_CHK_EN_MASK	0x00000010U /**< Command Index Check
+							Enable */
+#define XSDPS_DAT_PRESENT_SEL_MASK	0x00000020U /**< Data Present Select */
+#define XSDPS_CMD_TYPE_MASK		0x000000C0U /**< Command Type */
+#define XSDPS_CMD_TYPE_NORM_MASK	0x00000000U /**< CMD Type - Normal */
+#define XSDPS_CMD_TYPE_SUSPEND_MASK	0x00000040U /**< CMD Type - Suspend */
+#define XSDPS_CMD_TYPE_RESUME_MASK	0x00000080U /**< CMD Type - Resume */
+#define XSDPS_CMD_TYPE_ABORT_MASK	0x000000C0U /**< CMD Type - Abort */
+#define XSDPS_CMD_MASK			0x00003F00U /**< Command Index Mask -
+							Set to CMD0-63,
+							AMCD0-63 */
+
+/* @} */
+
+/** @name Auto CMD Error Status Register
+ *
+ * This register is read only register which contains
+ * information about the error status of Auto CMD 12 and 23.
+ * Read Only
+ * @{
+ */
+#define XSDPS_AUTO_CMD12_NT_EX_MASK	0x0001U /**< Auto CMD12 Not
+							executed */
+#define XSDPS_AUTO_CMD_TOUT_MASK	0x0002U /**< Auto CMD Timeout
+							Error */
+#define XSDPS_AUTO_CMD_CRC_MASK		0x0004U /**< Auto CMD CRC Error */
+#define XSDPS_AUTO_CMD_EB_MASK		0x0008U /**< Auto CMD End Bit
+							Error */
+#define XSDPS_AUTO_CMD_IND_MASK		0x0010U /**< Auto CMD Index Error */
+#define XSDPS_AUTO_CMD_CNI_ERR_MASK	0x0080U /**< Command not issued by
+							Auto CMD12 Error */
+/* @} */
+
+/** @name Host Control2 Register
+ *
+ * This register contains extended configuration bits.
+ * Read Write
+ * @{
+ */
+#define XSDPS_HC2_UHS_MODE_MASK		0x0007U /**< UHS Mode select bits */
+#define XSDPS_HC2_UHS_MODE_SDR12_MASK	0x0000U /**< SDR12 UHS Mode */
+#define XSDPS_HC2_UHS_MODE_SDR25_MASK	0x0001U /**< SDR25 UHS Mode */
+#define XSDPS_HC2_UHS_MODE_SDR50_MASK	0x0002U /**< SDR50 UHS Mode */
+#define XSDPS_HC2_UHS_MODE_SDR104_MASK	0x0003U /**< SDR104 UHS Mode */
+#define XSDPS_HC2_UHS_MODE_DDR50_MASK	0x0004U /**< DDR50 UHS Mode */
+#define XSDPS_HC2_1V8_EN_MASK		0x0008U /**< 1.8V Signal Enable */
+#define XSDPS_HC2_DRV_STR_SEL_MASK	0x0030U /**< Driver Strength
+							Selection */
+#define XSDPS_HC2_DRV_STR_B_MASK	0x0000U /**< Driver Strength B */
+#define XSDPS_HC2_DRV_STR_A_MASK	0x0010U /**< Driver Strength A */
+#define XSDPS_HC2_DRV_STR_C_MASK	0x0020U /**< Driver Strength C */
+#define XSDPS_HC2_DRV_STR_D_MASK	0x0030U /**< Driver Strength D */
+#define XSDPS_HC2_EXEC_TNG_MASK		0x0040U /**< Execute Tuning */
+#define XSDPS_HC2_SAMP_CLK_SEL_MASK	0x0080U /**< Sampling Clock
+							Selection */
+#define XSDPS_HC2_ASYNC_INTR_EN_MASK	0x4000U /**< Asynchronous Interrupt
+							Enable */
+#define XSDPS_HC2_PRE_VAL_EN_MASK	0x8000U /**< Preset Value Enable */
+
+/* @} */
+
+/** @name Capabilities Register
+ *
+ * Capabilities register is a read only register which contains
+ * information about the host controller.
+ * Sufficient if read once after power on.
+ * Read Only
+ * @{
+ */
+#define XSDPS_CAP_TOUT_CLK_FREQ_MASK	0x0000003FU /**< Timeout clock freq
+							select */
+#define XSDPS_CAP_TOUT_CLK_UNIT_MASK	0x00000080U /**< Timeout clock unit -
+							MHz/KHz */
+#define XSDPS_CAP_MAX_BLK_LEN_MASK	0x00030000U /**< Max block length */
+#define XSDPS_CAP_MAX_BLK_LEN_512B_MASK	0x00000000U /**< Max block 512 bytes */
+#define XSDPS_CAP_MAX_BL_LN_1024_MASK	0x00010000U /**< Max block 1024 bytes */
+#define XSDPS_CAP_MAX_BL_LN_2048_MASK	0x00020000U /**< Max block 2048 bytes */
+#define XSDPS_CAP_MAX_BL_LN_4096_MASK	0x00030000U /**< Max block 4096 bytes */
+
+#define XSDPS_CAP_EXT_MEDIA_BUS_MASK	0x00040000U /**< Extended media bus */
+#define XSDPS_CAP_ADMA2_MASK		0x00080000U /**< ADMA2 support */
+#define XSDPS_CAP_HIGH_SPEED_MASK	0x00200000U /**< High speed support */
+#define XSDPS_CAP_SDMA_MASK		0x00400000U /**< SDMA support */
+#define XSDPS_CAP_SUSP_RESUME_MASK	0x00800000U /**< Suspend/Resume
+							support */
+#define XSDPS_CAP_VOLT_3V3_MASK		0x01000000U /**< 3.3V support */
+#define XSDPS_CAP_VOLT_3V0_MASK		0x02000000U /**< 3.0V support */
+#define XSDPS_CAP_VOLT_1V8_MASK		0x04000000U /**< 1.8V support */
+
+#define XSDPS_CAP_SYS_BUS_64_MASK	0x10000000U /**< 64 bit system bus
+							support */
+/* Spec 2.0 */
+#define XSDPS_CAP_INTR_MODE_MASK	0x08000000U /**< Interrupt mode
+							support */
+#define XSDPS_CAP_SPI_MODE_MASK		0x20000000U /**< SPI mode */
+#define XSDPS_CAP_SPI_BLOCK_MODE_MASK	0x40000000U /**< SPI block mode */
+
+
+/* Spec 3.0 */
+#define XSDPS_CAPS_ASYNC_INTR_MASK	0x20000000U /**< Async Interrupt
+							support */
+#define XSDPS_CAPS_SLOT_TYPE_MASK	0xC0000000U /**< Slot Type */
+#define XSDPS_CAPS_REM_CARD			0x00000000U /**< Removable Slot */
+#define XSDPS_CAPS_EMB_SLOT			0x40000000U /**< Embedded Slot */
+#define XSDPS_CAPS_SHR_BUS			0x80000000U /**< Shared Bus Slot */
+
+#define XSDPS_ECAPS_SDR50_MASK		0x00000001U /**< SDR50 Mode support */
+#define XSDPS_ECAPS_SDR104_MASK		0x00000002U /**< SDR104 Mode support */
+#define XSDPS_ECAPS_DDR50_MASK		0x00000004U /**< DDR50 Mode support */
+#define XSDPS_ECAPS_DRV_TYPE_A_MASK	0x00000010U /**< DriverType A support */
+#define XSDPS_ECAPS_DRV_TYPE_C_MASK	0x00000020U /**< DriverType C support */
+#define XSDPS_ECAPS_DRV_TYPE_D_MASK	0x00000040U /**< DriverType D support */
+#define XSDPS_ECAPS_TMR_CNT_MASK	0x00000F00U /**< Timer Count for
+							Re-tuning */
+#define XSDPS_ECAPS_USE_TNG_SDR50_MASK	0x00002000U /**< SDR50 Mode needs
+							tuning */
+#define XSDPS_ECAPS_RE_TNG_MODES_MASK	0x0000C000U /**< Re-tuning modes
+							support */
+#define XSDPS_ECAPS_RE_TNG_MODE1_MASK	0x00000000U /**< Re-tuning mode 1 */
+#define XSDPS_ECAPS_RE_TNG_MODE2_MASK	0x00004000U /**< Re-tuning mode 2 */
+#define XSDPS_ECAPS_RE_TNG_MODE3_MASK	0x00008000U /**< Re-tuning mode 3 */
+#define XSDPS_ECAPS_CLK_MULT_MASK	0x00FF0000U /**< Clock Multiplier value
+							for Programmable clock
+							mode */
+#define XSDPS_ECAPS_SPI_MODE_MASK	0x01000000U /**< SPI mode */
+#define XSDPS_ECAPS_SPI_BLK_MODE_MASK	0x02000000U /**< SPI block mode */
+
+/* @} */
+
+/** @name Present State Register
+ *
+ * Gives the current status of the host controller
+ * Read Only
+ * @{
+ */
+
+#define XSDPS_PSR_INHIBIT_CMD_MASK	0x00000001U /**< Command inhibit - CMD */
+#define XSDPS_PSR_INHIBIT_DAT_MASK	0x00000002U /**< Command Inhibit - DAT */
+#define XSDPS_PSR_DAT_ACTIVE_MASK	0x00000004U /**< DAT line active */
+#define XSDPS_PSR_RE_TUNING_REQ_MASK	0x00000008U /**< Re-tuning request */
+#define XSDPS_PSR_WR_ACTIVE_MASK	0x00000100U /**< Write transfer active */
+#define XSDPS_PSR_RD_ACTIVE_MASK	0x00000200U /**< Read transfer active */
+#define XSDPS_PSR_BUFF_WR_EN_MASK	0x00000400U /**< Buffer write enable */
+#define XSDPS_PSR_BUFF_RD_EN_MASK	0x00000800U /**< Buffer read enable */
+#define XSDPS_PSR_CARD_INSRT_MASK	0x00010000U /**< Card inserted */
+#define XSDPS_PSR_CARD_STABLE_MASK	0x00020000U /**< Card state stable */
+#define XSDPS_PSR_CARD_DPL_MASK		0x00040000U /**< Card detect pin level */
+#define XSDPS_PSR_WPS_PL_MASK		0x00080000U /**< Write protect switch
+								pin level */
+#define XSDPS_PSR_DAT30_SG_LVL_MASK	0x00F00000U /**< Data 3:0 signal lvl */
+#define XSDPS_PSR_CMD_SG_LVL_MASK	0x01000000U /**< Cmd Line signal lvl */
+#define XSDPS_PSR_DAT74_SG_LVL_MASK	0x1E000000U /**< Data 7:4 signal lvl */
+
+/* @} */
+
+/** @name Maximum Current Capablities Register
+ *
+ * This register is read only register which contains
+ * information about current capabilities at each voltage levels.
+ * Read Only
+ * @{
+ */
+#define XSDPS_MAX_CUR_CAPS_1V8_MASK	0x00000F00U /**< Maximum Current
+							Capability at 1.8V */
+#define XSDPS_MAX_CUR_CAPS_3V0_MASK	0x000000F0U /**< Maximum Current
+							Capability at 3.0V */
+#define XSDPS_MAX_CUR_CAPS_3V3_MASK	0x0000000FU /**< Maximum Current
+							Capability at 3.3V */
+/* @} */
+
+
+/** @name Force Event for Auto CMD Error Status Register
+ *
+ * This register is write only register which contains
+ * control bits to generate events for Auto CMD error status.
+ * Write Only
+ * @{
+ */
+#define XSDPS_FE_AUTO_CMD12_NT_EX_MASK	0x0001U /**< Auto CMD12 Not
+							executed */
+#define XSDPS_FE_AUTO_CMD_TOUT_MASK	0x0002U /**< Auto CMD Timeout
+							Error */
+#define XSDPS_FE_AUTO_CMD_CRC_MASK	0x0004U /**< Auto CMD CRC Error */
+#define XSDPS_FE_AUTO_CMD_EB_MASK	0x0008U /**< Auto CMD End Bit
+							Error */
+#define XSDPS_FE_AUTO_CMD_IND_MASK	0x0010U /**< Auto CMD Index Error */
+#define XSDPS_FE_AUTO_CMD_CNI_ERR_MASK	0x0080U /**< Command not issued by
+							Auto CMD12 Error */
+/* @} */
+
+
+
+/** @name Force Event for Error Interrupt Status Register
+ *
+ * This register is write only register which contains
+ * control bits to generate events of error interrupt status register.
+ * Write Only
+ * @{
+ */
+#define XSDPS_FE_INTR_ERR_CT_MASK	0x0001U /**< Command Timeout
+							Error */
+#define XSDPS_FE_INTR_ERR_CCRC_MASK	0x0002U /**< Command CRC Error */
+#define XSDPS_FE_INTR_ERR_CEB_MASK	0x0004U /**< Command End Bit
+							Error */
+#define XSDPS_FE_INTR_ERR_CI_MASK	0x0008U /**< Command Index Error */
+#define XSDPS_FE_INTR_ERR_DT_MASK	0x0010U /**< Data Timeout Error */
+#define XSDPS_FE_INTR_ERR_DCRC_MASK	0x0020U /**< Data CRC Error */
+#define XSDPS_FE_INTR_ERR_DEB_MASK	0x0040U /**< Data End Bit Error */
+#define XSDPS_FE_INTR_ERR_CUR_LMT_MASK	0x0080U /**< Current Limit Error */
+#define XSDPS_FE_INTR_ERR_AUTO_CMD_MASK	0x0100U /**< Auto CMD Error */
+#define XSDPS_FE_INTR_ERR_ADMA_MASK	0x0200U /**< ADMA Error */
+#define XSDPS_FE_INTR_ERR_TR_MASK	0x1000U /**< Target Reponse */
+#define XSDPS_FE_INTR_VEND_SPF_ERR_MASK	0xE000U /**< Vendor Specific
+							Error */
+
+/* @} */
+
+/** @name ADMA Error Status Register
+ *
+ * This register is read only register which contains
+ * status information about ADMA errors.
+ * Read Only
+ * @{
+ */
+#define XSDPS_ADMA_ERR_MM_LEN_MASK	0x04U /**< ADMA Length Mismatch
+							Error */
+#define XSDPS_ADMA_ERR_STATE_MASK	0x03U /**< ADMA Error State */
+#define XSDPS_ADMA_ERR_STATE_STOP_MASK	0x00U /**< ADMA Error State
+							STOP */
+#define XSDPS_ADMA_ERR_STATE_FDS_MASK	0x01U /**< ADMA Error State
+							FDS */
+#define XSDPS_ADMA_ERR_STATE_TFR_MASK	0x03U /**< ADMA Error State
+							TFR */
+/* @} */
+
+/** @name Preset Values Register
+ *
+ * This register is read only register which contains
+ * preset values for each of speed modes.
+ * Read Only
+ * @{
+ */
+#define XSDPS_PRE_VAL_SDCLK_FSEL_MASK	0x03FFU /**< SDCLK Frequency
+							Select Value */
+#define XSDPS_PRE_VAL_CLK_GEN_SEL_MASK	0x0400U /**< Clock Generator
+							Mode Select */
+#define XSDPS_PRE_VAL_DRV_STR_SEL_MASK	0xC000U /**< Driver Strength
+							Select Value */
+
+/* @} */
+
+/** @name Slot Interrupt Status Register
+ *
+ * This register is read only register which contains
+ * interrupt slot signal for each slot.
+ * Read Only
+ * @{
+ */
+#define XSDPS_SLOT_INTR_STS_INT_MASK	0x0007U /**< Interrupt Signal
+							mask */
+
+/* @} */
+
+/** @name Host Controller Version Register
+ *
+ * This register is read only register which contains
+ * Host Controller and Vendor Specific version.
+ * Read Only
+ * @{
+ */
+#define XSDPS_HC_VENDOR_VER		0xFF00U /**< Vendor
+							Specification
+							version mask */
+#define XSDPS_HC_SPEC_VER_MASK		0x00FFU /**< Host
+							Specification
+							version mask */
+#define XSDPS_HC_SPEC_V3		0x0002U
+#define XSDPS_HC_SPEC_V2		0x0001U
+#define XSDPS_HC_SPEC_V1		0x0000U
+
+/** @name Block size mask for 512 bytes
+ *
+ * Block size mask for 512 bytes - This is the default block size.
+ * @{
+ */
+
+#define XSDPS_BLK_SIZE_512_MASK	0x200U
+
+/* @} */
+
+/** @name Commands
+ *
+ * Constant definitions for commands and response related to SD
+ * @{
+ */
+
+#define XSDPS_APP_CMD_PREFIX	 0x8000U
+#define CMD0	 0x0000U
+#define CMD1	 0x0100U
+#define CMD2	 0x0200U
+#define CMD3	 0x0300U
+#define CMD4	 0x0400U
+#define CMD5	 0x0500U
+#define CMD6	 0x0600U
+#define ACMD6	(XSDPS_APP_CMD_PREFIX + 0x0600U)
+#define CMD7	 0x0700U
+#define CMD8	 0x0800U
+#define CMD9	 0x0900U
+#define CMD10	 0x0A00U
+#define CMD11	 0x0B00U
+#define CMD12	 0x0C00U
+#define ACMD13	 (XSDPS_APP_CMD_PREFIX + 0x0D00U)
+#define CMD16	 0x1000U
+#define CMD17	 0x1100U
+#define CMD18	 0x1200U
+#define CMD19	 0x1300U
+#define CMD21	 0x1500U
+#define CMD23	 0x1700U
+#define ACMD23	 (XSDPS_APP_CMD_PREFIX + 0x1700U)
+#define CMD24	 0x1800U
+#define CMD25	 0x1900U
+#define CMD41	 0x2900U
+#define ACMD41	 (XSDPS_APP_CMD_PREFIX + 0x2900U)
+#define ACMD42	 (XSDPS_APP_CMD_PREFIX + 0x2A00U)
+#define ACMD51	 (XSDPS_APP_CMD_PREFIX + 0x3300U)
+#define CMD52	 0x3400U
+#define CMD55	 0x3700U
+#define CMD58	 0x3A00U
+
+#define RESP_NONE	(u32)XSDPS_CMD_RESP_NONE_MASK
+#define RESP_R1		(u32)XSDPS_CMD_RESP_L48_MASK | (u32)XSDPS_CMD_CRC_CHK_EN_MASK | \
+			(u32)XSDPS_CMD_INX_CHK_EN_MASK
+
+#define RESP_R1B	(u32)XSDPS_CMD_RESP_L48_BSY_CHK_MASK | \
+			(u32)XSDPS_CMD_CRC_CHK_EN_MASK | (u32)XSDPS_CMD_INX_CHK_EN_MASK
+
+#define RESP_R2		(u32)XSDPS_CMD_RESP_L136_MASK | (u32)XSDPS_CMD_CRC_CHK_EN_MASK
+#define RESP_R3		(u32)XSDPS_CMD_RESP_L48_MASK
+
+#define RESP_R6		(u32)XSDPS_CMD_RESP_L48_BSY_CHK_MASK | \
+			(u32)XSDPS_CMD_CRC_CHK_EN_MASK | (u32)XSDPS_CMD_INX_CHK_EN_MASK
+
+/* @} */
+
+/* Card Interface Conditions Definitions */
+#define XSDPS_CIC_CHK_PATTERN	0xAAU
+#define XSDPS_CIC_VOLT_MASK	(0xFU<<8)
+#define XSDPS_CIC_VOLT_2V7_3V6	(1U<<8)
+#define XSDPS_CIC_VOLT_LOW	(1U<<9)
+
+/* Operation Conditions Register Definitions */
+#define XSDPS_OCR_PWRUP_STS	(1U<<31)
+#define XSDPS_OCR_CC_STS	(1U<<30)
+#define XSDPS_OCR_S18		(1U<<24)
+#define XSDPS_OCR_3V5_3V6	(1U<<23)
+#define XSDPS_OCR_3V4_3V5	(1U<<22)
+#define XSDPS_OCR_3V3_3V4	(1U<<21)
+#define XSDPS_OCR_3V2_3V3	(1U<<20)
+#define XSDPS_OCR_3V1_3V2	(1U<<19)
+#define XSDPS_OCR_3V0_3V1	(1U<<18)
+#define XSDPS_OCR_2V9_3V0	(1U<<17)
+#define XSDPS_OCR_2V8_2V9	(1U<<16)
+#define XSDPS_OCR_2V7_2V8	(1U<<15)
+#define XSDPS_OCR_1V7_1V95	(1U<<7)
+#define XSDPS_OCR_HIGH_VOL	0x00FF8000U
+#define XSDPS_OCR_LOW_VOL	0x00000080U
+
+/* SD Card Configuration Register Definitions */
+#define XSDPS_SCR_REG_LEN		8U
+#define XSDPS_SCR_STRUCT_MASK		(0xFU<<28)
+#define XSDPS_SCR_SPEC_MASK		(0xFU<<24)
+#define XSDPS_SCR_SPEC_1V0		0U
+#define XSDPS_SCR_SPEC_1V1		(1U<<24)
+#define XSDPS_SCR_SPEC_2V0_3V0		(2U<<24)
+#define XSDPS_SCR_MEM_VAL_AF_ERASE	(1U<<23)
+#define XSDPS_SCR_SEC_SUPP_MASK		(7U<<20)
+#define XSDPS_SCR_SEC_SUPP_NONE		0U
+#define XSDPS_SCR_SEC_SUPP_1V1		(2U<<20)
+#define XSDPS_SCR_SEC_SUPP_2V0		(3U<<20)
+#define XSDPS_SCR_SEC_SUPP_3V0		(4U<<20)
+#define XSDPS_SCR_BUS_WIDTH_MASK	(0xFU<<16)
+#define XSDPS_SCR_BUS_WIDTH_1		(1U<<16)
+#define XSDPS_SCR_BUS_WIDTH_4		(4U<<16)
+#define XSDPS_SCR_SPEC3_MASK		(1U<<12)
+#define XSDPS_SCR_SPEC3_2V0		0U
+#define XSDPS_SCR_SPEC3_3V0		(1U<<12)
+#define XSDPS_SCR_CMD_SUPP_MASK		0x3U
+#define XSDPS_SCR_CMD23_SUPP		(1U<<1)
+#define XSDPS_SCR_CMD20_SUPP		(1U<<0)
+
+/* Card Status Register Definitions */
+#define XSDPS_CD_STS_OUT_OF_RANGE	(1U<<31)
+#define XSDPS_CD_STS_ADDR_ERR		(1U<<30)
+#define XSDPS_CD_STS_BLK_LEN_ERR	(1U<<29)
+#define XSDPS_CD_STS_ER_SEQ_ERR		(1U<<28)
+#define XSDPS_CD_STS_ER_PRM_ERR		(1U<<27)
+#define XSDPS_CD_STS_WP_VIO		(1U<<26)
+#define XSDPS_CD_STS_IS_LOCKED		(1U<<25)
+#define XSDPS_CD_STS_LOCK_UNLOCK_FAIL	(1U<<24)
+#define XSDPS_CD_STS_CMD_CRC_ERR	(1U<<23)
+#define XSDPS_CD_STS_ILGL_CMD		(1U<<22)
+#define XSDPS_CD_STS_CARD_ECC_FAIL	(1U<<21)
+#define XSDPS_CD_STS_CC_ERR		(1U<<20)
+#define XSDPS_CD_STS_ERR		(1U<<19)
+#define XSDPS_CD_STS_CSD_OVRWR		(1U<<16)
+#define XSDPS_CD_STS_WP_ER_SKIP		(1U<<15)
+#define XSDPS_CD_STS_CARD_ECC_DIS	(1U<<14)
+#define XSDPS_CD_STS_ER_RST		(1U<<13)
+#define XSDPS_CD_STS_CUR_STATE		(0xFU<<9)
+#define XSDPS_CD_STS_RDY_FOR_DATA	(1U<<8)
+#define XSDPS_CD_STS_APP_CMD		(1U<<5)
+#define XSDPS_CD_STS_AKE_SEQ_ERR	(1U<<2)
+
+/* Switch Function Definitions CMD6 */
+#define XSDPS_SWITCH_SD_RESP_LEN	64U
+
+#define XSDPS_SWITCH_FUNC_SWITCH	(1U<<31)
+#define XSDPS_SWITCH_FUNC_CHECK		0U
+
+#define XSDPS_MODE_FUNC_GRP1		1U
+#define XSDPS_MODE_FUNC_GRP2		2U
+#define XSDPS_MODE_FUNC_GRP3		3U
+#define XSDPS_MODE_FUNC_GRP4		4U
+#define XSDPS_MODE_FUNC_GRP5		5U
+#define XSDPS_MODE_FUNC_GRP6		6U
+
+#define XSDPS_FUNC_GRP_DEF_VAL		0xFU
+#define XSDPS_FUNC_ALL_GRP_DEF_VAL	0xFFFFFFU
+
+#define XSDPS_ACC_MODE_DEF_SDR12	0U
+#define XSDPS_ACC_MODE_HS_SDR25		1U
+#define XSDPS_ACC_MODE_SDR50		2U
+#define XSDPS_ACC_MODE_SDR104		3U
+#define XSDPS_ACC_MODE_DDR50		4U
+
+#define XSDPS_CMD_SYS_ARG_SHIFT		4U
+#define XSDPS_CMD_SYS_DEF		0U
+#define XSDPS_CMD_SYS_eC		1U
+#define XSDPS_CMD_SYS_OTP		3U
+#define XSDPS_CMD_SYS_ASSD		4U
+#define XSDPS_CMD_SYS_VEND		5U
+
+#define XSDPS_DRV_TYPE_ARG_SHIFT	8U
+#define XSDPS_DRV_TYPE_B		0U
+#define XSDPS_DRV_TYPE_A		1U
+#define XSDPS_DRV_TYPE_C		2U
+#define XSDPS_DRV_TYPE_D		3U
+
+#define XSDPS_CUR_LIM_ARG_SHIFT		12U
+#define XSDPS_CUR_LIM_200		0U
+#define XSDPS_CUR_LIM_400		1U
+#define XSDPS_CUR_LIM_600		2U
+#define XSDPS_CUR_LIM_800		3U
+
+#define CSD_SPEC_VER_MASK		0x3C0000U
+
+/* EXT_CSD field definitions */
+#define XSDPS_EXT_CSD_SIZE		512U
+
+#define EXT_CSD_WR_REL_PARAM_EN		(1U<<2)
+
+#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS    (0x40U)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS   (0x10U)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_EN    (0x04U)
+#define EXT_CSD_BOOT_WP_B_PWR_WP_EN     (0x01U)
+
+#define EXT_CSD_PART_CONFIG_ACC_MASK    (0x7U)
+#define EXT_CSD_PART_CONFIG_ACC_BOOT0   (0x1U)
+#define EXT_CSD_PART_CONFIG_ACC_RPMB    (0x3U)
+#define EXT_CSD_PART_CONFIG_ACC_GP0     (0x4U)
+
+#define EXT_CSD_PART_SUPPORT_PART_EN    (0x1U)
+
+#define EXT_CSD_CMD_SET_NORMAL          (1U<<0)
+#define EXT_CSD_CMD_SET_SECURE          (1U<<1)
+#define EXT_CSD_CMD_SET_CPSECURE        (1U<<2)
+
+#define EXT_CSD_CARD_TYPE_26    	(1U<<0)  /* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_52    	(1U<<1)  /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_MASK  	0x3FU    /* Mask out reserved bits */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V	(1U<<2)   /* Card can run at 52MHz */
+                                             /* DDR mode @1.8V or 3V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_1_2V	(1U<<3)   /* Card can run at 52MHz */
+                                             /* DDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_52	(EXT_CSD_CARD_TYPE_DDR_1_8V  \
+                                        | EXT_CSD_CARD_TYPE_DDR_1_2V)
+#define EXT_CSD_CARD_TYPE_SDR_1_8V      (1U<<4)  /* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_SDR_1_2V      (1U<<5)  /* Card can run at 200MHz */
+                                                /* SDR mode @1.2V I/O */
+#define EXT_CSD_BUS_WIDTH_BYTE			183U
+#define EXT_CSD_BUS_WIDTH_1_BIT			0U	/* Card is in 1 bit mode */
+#define EXT_CSD_BUS_WIDTH_4_BIT			1U	/* Card is in 4 bit mode */
+#define EXT_CSD_BUS_WIDTH_8_BIT			2U	/* Card is in 8 bit mode */
+#define EXT_CSD_BUS_WIDTH_DDR_4_BIT		5U	/* Card is in 4 bit DDR mode */
+#define EXT_CSD_BUS_WIDTH_DDR_8_BIT		6U	/* Card is in 8 bit DDR mode */
+
+#define EXT_CSD_HS_TIMING_BYTE		185U
+#define EXT_CSD_HS_TIMING_DEF		0U
+#define EXT_CSD_HS_TIMING_HIGH		1U	/* Card is in high speed mode */
+#define EXT_CSD_HS_TIMING_HS200		2U	/* Card is in HS200 mode */
+
+
+#define XSDPS_EXT_CSD_CMD_SET		0U
+#define XSDPS_EXT_CSD_SET_BITS		1U
+#define XSDPS_EXT_CSD_CLR_BITS		2U
+#define XSDPS_EXT_CSD_WRITE_BYTE	3U
+
+#define XSDPS_MMC_DEF_SPEED_ARG		(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					| ((u32)EXT_CSD_HS_TIMING_BYTE << 16) \
+					| ((u32)EXT_CSD_HS_TIMING_DEF << 8))
+
+#define XSDPS_MMC_HIGH_SPEED_ARG	(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					 | ((u32)EXT_CSD_HS_TIMING_BYTE << 16) \
+					 | ((u32)EXT_CSD_HS_TIMING_HIGH << 8))
+
+#define XSDPS_MMC_HS200_ARG		(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					 | ((u32)EXT_CSD_HS_TIMING_BYTE << 16) \
+					 | ((u32)EXT_CSD_HS_TIMING_HS200 << 8))
+
+#define XSDPS_MMC_1_BIT_BUS_ARG		(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_BYTE << 16) \
+					 | ((u32)EXT_CSD_BUS_WITH_1_BIT << 8))
+
+#define XSDPS_MMC_4_BIT_BUS_ARG		(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_BYTE << 16) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_4_BIT << 8))
+
+#define XSDPS_MMC_8_BIT_BUS_ARG		(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_BYTE << 16) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_8_BIT << 8))
+
+#define XSDPS_MMC_DDR_4_BIT_BUS_ARG		(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_BYTE << 16) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_DDR_4_BIT << 8))
+
+#define XSDPS_MMC_DDR_8_BIT_BUS_ARG		(((u32)XSDPS_EXT_CSD_WRITE_BYTE << 24) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_BYTE << 16) \
+					 | ((u32)EXT_CSD_BUS_WIDTH_DDR_8_BIT << 8))
+
+#define XSDPS_MMC_DELAY_FOR_SWITCH	1000U
+
+/* @} */
+
+/* @400KHz, in usec */
+#define XSDPS_74CLK_DELAY	2960U
+#define XSDPS_100CLK_DELAY	4000U
+#define XSDPS_INIT_DELAY	10000U
+
+#define XSDPS_DEF_VOLT_LVL	XSDPS_PC_BUS_VSEL_3V0_MASK
+#define XSDPS_CARD_DEF_ADDR	0x1234U
+
+#define XSDPS_CARD_SD		1U
+#define XSDPS_CARD_MMC		2U
+#define XSDPS_CARD_SDIO		3U
+#define XSDPS_CARD_SDCOMBO	4U
+#define XSDPS_CHIP_EMMC		5U
+
+
+/** @name ADMA2 Descriptor related definitions
+ *
+ * ADMA2 Descriptor related definitions
+ * @{
+ */
+
+#define XSDPS_DESC_MAX_LENGTH 65536U
+
+#define XSDPS_DESC_VALID     	(0x1U << 0)
+#define XSDPS_DESC_END       	(0x1U << 1)
+#define XSDPS_DESC_INT       	(0x1U << 2)
+#define XSDPS_DESC_TRAN  	(0x2U << 4)
+
+/* @} */
+
+/* For changing clock frequencies */
+#define XSDPS_CLK_400_KHZ		400000U		/**< 400 KHZ */
+#define XSDPS_CLK_50_MHZ		50000000U	/**< 50 MHZ */
+#define XSDPS_CLK_52_MHZ		52000000U	/**< 52 MHZ */
+#define XSDPS_SD_VER_1_0		0x1U		/**< SD ver 1 */
+#define XSDPS_SD_VER_2_0		0x2U		/**< SD ver 2 */
+#define XSDPS_SCR_BLKCNT	1U
+#define XSDPS_SCR_BLKSIZE	8U
+#define XSDPS_1_BIT_WIDTH	0x1U
+#define XSDPS_4_BIT_WIDTH	0x2U
+#define XSDPS_8_BIT_WIDTH	0x3U
+#define XSDPS_UHS_SPEED_MODE_SDR12	0x0U
+#define XSDPS_UHS_SPEED_MODE_SDR25	0x1U
+#define XSDPS_UHS_SPEED_MODE_SDR50	0x2U
+#define XSDPS_UHS_SPEED_MODE_SDR104	0x3U
+#define XSDPS_UHS_SPEED_MODE_DDR50	0x4U
+#define XSDPS_SWITCH_CMD_BLKCNT		1U
+#define XSDPS_SWITCH_CMD_BLKSIZE	64U
+#define XSDPS_SWITCH_CMD_HS_GET		0x00FFFFF0U
+#define XSDPS_SWITCH_CMD_HS_SET		0x80FFFFF1U
+#define XSDPS_SWITCH_CMD_SDR12_SET		0x80FFFFF0U
+#define XSDPS_SWITCH_CMD_SDR25_SET		0x80FFFFF1U
+#define XSDPS_SWITCH_CMD_SDR50_SET		0x80FFFFF2U
+#define XSDPS_SWITCH_CMD_SDR104_SET		0x80FFFFF3U
+#define XSDPS_SWITCH_CMD_DDR50_SET		0x80FFFFF4U
+#define XSDPS_EXT_CSD_CMD_BLKCNT	1U
+#define XSDPS_EXT_CSD_CMD_BLKSIZE	512U
+#define XSDPS_TUNING_CMD_BLKCNT		1U
+#define XSDPS_TUNING_CMD_BLKSIZE	64U
+
+#define XSDPS_HIGH_SPEED_MAX_CLK	50000000U
+#define XSDPS_UHS_SDR104_MAX_CLK	208000000U
+#define XSDPS_UHS_SDR50_MAX_CLK		100000000U
+#define XSDPS_UHS_DDR50_MAX_CLK		50000000U
+#define XSDPS_UHS_SDR25_MAX_CLK		50000000U
+#define XSDPS_UHS_SDR12_MAX_CLK		25000000U
+
+#define SD_DRIVER_TYPE_B	0x01U
+#define SD_DRIVER_TYPE_A	0x02U
+#define SD_DRIVER_TYPE_C	0x04U
+#define SD_DRIVER_TYPE_D	0x08U
+#define SD_SET_CURRENT_LIMIT_200	0U
+#define SD_SET_CURRENT_LIMIT_400	1U
+#define SD_SET_CURRENT_LIMIT_600	2U
+#define SD_SET_CURRENT_LIMIT_800	3U
+
+#define SD_MAX_CURRENT_200	(1U << SD_SET_CURRENT_LIMIT_200)
+#define SD_MAX_CURRENT_400	(1U << SD_SET_CURRENT_LIMIT_400)
+#define SD_MAX_CURRENT_600	(1U << SD_SET_CURRENT_LIMIT_600)
+#define SD_MAX_CURRENT_800	(1U << SD_SET_CURRENT_LIMIT_800)
+
+#define XSDPS_SD_SDR12_MAX_CLK	25000000U
+#define XSDPS_SD_SDR25_MAX_CLK	50000000U
+#define XSDPS_SD_SDR50_MAX_CLK	100000000U
+#define XSDPS_SD_DDR50_MAX_CLK	50000000U
+#define XSDPS_SD_SDR104_MAX_CLK	208000000U
+#define XSDPS_MMC_HS200_MAX_CLK	200000000U
+
+#define XSDPS_CARD_STATE_IDLE		0U
+#define XSDPS_CARD_STATE_RDY		1U
+#define XSDPS_CARD_STATE_IDEN		2U
+#define XSDPS_CARD_STATE_STBY		3U
+#define XSDPS_CARD_STATE_TRAN		4U
+#define XSDPS_CARD_STATE_DATA		5U
+#define XSDPS_CARD_STATE_RCV		6U
+#define XSDPS_CARD_STATE_PROG		7U
+#define XSDPS_CARD_STATE_DIS		8U
+#define XSDPS_CARD_STATE_BTST		9U
+#define XSDPS_CARD_STATE_SLP		10U
+
+#define XSDPS_SLOT_REM			0U
+#define XSDPS_SLOT_EMB			1U
+
+#if defined (__arm__) || defined (__aarch64__)
+#define SD_DLL_CTRL 			0x00000358U
+#define SD_ITAPDLY				0x00000314U
+#define SD_OTAPDLYSEL			0x00000318U
+#define SD0_DLL_RST				0x00000004U
+#define SD0_ITAPCHGWIN			0x00000200U
+#define SD0_ITAPDLYENA			0x00000100U
+#define SD0_OTAPDLYENA			0x00000040U
+#define SD0_OTAPDLYSEL_HS200	0x00000003U
+#endif
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+#define XSdPs_In64 Xil_In64
+#define XSdPs_Out64 Xil_Out64
+
+#define XSdPs_In32 Xil_In32
+#define XSdPs_Out32 Xil_Out32
+
+#define XSdPs_In16 Xil_In16
+#define XSdPs_Out16 Xil_Out16
+
+#define XSdPs_In8 Xil_In8
+#define XSdPs_Out8 Xil_Out8
+
+/****************************************************************************/
+/**
+* Read a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to the target register.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u32 XSdPs_ReadReg(XSdPs *InstancePtr. s32 RegOffset)
+*
+******************************************************************************/
+#define XSdPs_ReadReg64(InstancePtr, RegOffset) \
+	XSdPs_In64((InstancePtr->Config.BaseAddress) + RegOffset)
+
+/***************************************************************************/
+/**
+* Write to a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to target register.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XSdPs_WriteReg(XSdPs *InstancePtr, s32 RegOffset,
+*		u64 RegisterValue)
+*
+******************************************************************************/
+#define XSdPs_WriteReg64(InstancePtr, RegOffset, RegisterValue) \
+	XSdPs_Out64((InstancePtr->Config.BaseAddress) + (RegOffset), \
+		(RegisterValue))
+
+/****************************************************************************/
+/**
+* Read a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to the target register.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u32 XSdPs_ReadReg(u32 BaseAddress. int RegOffset)
+*
+******************************************************************************/
+#define XSdPs_ReadReg(BaseAddress, RegOffset) \
+	XSdPs_In32((BaseAddress) + (RegOffset))
+
+/***************************************************************************/
+/**
+* Write to a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to target register.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XSdPs_WriteReg(u32 BaseAddress, int RegOffset,
+*		u32 RegisterValue)
+*
+******************************************************************************/
+#define XSdPs_WriteReg(BaseAddress, RegOffset, RegisterValue) \
+	XSdPs_Out32((BaseAddress) + (RegOffset), (RegisterValue))
+
+/****************************************************************************/
+/**
+* Read a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to the target register.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u16 XSdPs_ReadReg(u32 BaseAddress. int RegOffset)
+*
+******************************************************************************/
+#define XSdPs_ReadReg16(BaseAddress, RegOffset) \
+	XSdPs_In16((BaseAddress) + (RegOffset))
+
+/***************************************************************************/
+/**
+* Write to a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to target register.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XSdPs_WriteReg(u32 BaseAddress, int RegOffset,
+*		u16 RegisterValue)
+*
+******************************************************************************/
+#define XSdPs_WriteReg16(BaseAddress, RegOffset, RegisterValue) \
+	XSdPs_Out16((BaseAddress) + (RegOffset), (RegisterValue))
+
+/****************************************************************************/
+/**
+* Read a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to the target register.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u8 XSdPs_ReadReg(u32 BaseAddress. int RegOffset)
+*
+******************************************************************************/
+#define XSdPs_ReadReg8(BaseAddress, RegOffset) \
+	XSdPs_In8((BaseAddress) + (RegOffset))
+
+/***************************************************************************/
+/**
+* Write to a register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the 1st register of the
+*		device to target register.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XSdPs_WriteReg(u32 BaseAddress, int RegOffset,
+*		u8 RegisterValue)
+*
+******************************************************************************/
+#define XSdPs_WriteReg8(BaseAddress, RegOffset, RegisterValue) \
+	XSdPs_Out8((BaseAddress) + (RegOffset), (RegisterValue))
+
+/***************************************************************************/
+/**
+* Macro to get present status register
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XSdPs_WriteReg(u32 BaseAddress, int RegOffset,
+*		u8 RegisterValue)
+*
+******************************************************************************/
+#define XSdPs_GetPresentStatusReg(BaseAddress) \
+		XSdPs_In32((BaseAddress) + (XSDPS_PRES_STATE_OFFSET))
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SD_HW_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_options.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_options.c
new file mode 100644
index 000000000..8151eef1b
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_options.c
@@ -0,0 +1,1152 @@
+/******************************************************************************
+*
+* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsdps_options.c
+* @addtogroup sdps_v2_5
+* @{
+*
+* Contains API's for changing the various options in host and card.
+* See xsdps.h for a detailed description of the device and driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ---    -------- -----------------------------------------------
+* 1.00a hk/sg  10/17/13 Initial release
+* 2.1   hk     04/18/14 Increase sleep for eMMC switch command.
+*                       Add sleep for microblaze designs. CR# 781117.
+* 2.3   sk     09/23/14 Use XSdPs_Change_ClkFreq API whenever changing
+*						clock.CR# 816586.
+* 2.5 	sg	   07/09/15 Added SD 3.0 features
+*       kvn    07/15/15 Modified the code according to MISRAC-2012.
+* 2.7   sk     01/08/16 Added workaround for issue in auto tuning mode
+*                       of SDR50, SDR104 and HS200.
+*       sk     02/16/16 Corrected the Tuning logic.
+*       sk     03/02/16 Configured the Tap Delay values for eMMC HS200 mode.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+#include "xsdps.h"
+/*
+ * The header sleep.h and API usleep() can only be used with an arm design.
+ * MB_Sleep() is used for microblaze design.
+ */
+#if defined (__arm__) || defined (__aarch64__)
+
+#include "sleep.h"
+
+#endif
+
+#ifdef __MICROBLAZE__
+
+#include "microblaze_sleep.h"
+
+#endif
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+s32 XSdPs_CmdTransfer(XSdPs *InstancePtr, u32 Cmd, u32 Arg, u32 BlkCnt);
+void XSdPs_SetupADMA2DescTbl(XSdPs *InstancePtr, u32 BlkCnt, const u8 *Buff);
+s32 XSdPs_Uhs_ModeInit(XSdPs *InstancePtr, u8 Mode);
+static s32 XSdPs_Execute_Tuning(XSdPs *InstancePtr);
+s32 XSdPs_Uhs_ModeInit(XSdPs *InstancePtr, u8 Mode);
+#if defined (__arm__) || defined (__aarch64__)
+void XSdPs_SetTapDelay(XSdPs *InstancePtr);
+#endif
+
+/*****************************************************************************/
+/**
+* Update Block size for read/write operations.
+*
+* @param	InstancePtr is a pointer to the instance to be worked on.
+* @param	BlkSize - Block size passed by the user.
+*
+* @return	None
+*
+******************************************************************************/
+s32 XSdPs_SetBlkSize(XSdPs *InstancePtr, u16 BlkSize)
+{
+	s32 Status;
+	u32 PresentStateReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	PresentStateReg = XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_PRES_STATE_OFFSET);
+
+	if ((PresentStateReg & ((u32)XSDPS_PSR_INHIBIT_CMD_MASK |
+			(u32)XSDPS_PSR_INHIBIT_DAT_MASK |
+			(u32)XSDPS_PSR_WR_ACTIVE_MASK | (u32)XSDPS_PSR_RD_ACTIVE_MASK)) != 0U) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+
+	/* Send block write command */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD16, BlkSize, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	Status = (s32)XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+
+	/* Set block size to the value passed */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_BLK_SIZE_OFFSET,
+			 BlkSize & XSDPS_BLK_SIZE_MASK);
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to get bus width support by card.
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+* @param	SCR - buffer to store SCR register returned by card.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Get_BusWidth(XSdPs *InstancePtr, u8 *SCR)
+{
+	s32 Status;
+	u32 StatusReg;
+	u16 BlkCnt;
+	u16 BlkSize;
+	s32 LoopCnt;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	for (LoopCnt = 0; LoopCnt < 8; LoopCnt++) {
+		SCR[LoopCnt] = 0U;
+	}
+
+	/* Send block write command */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD55,
+			InstancePtr->RelCardAddr, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	BlkCnt = XSDPS_SCR_BLKCNT;
+	BlkSize = XSDPS_SCR_BLKSIZE;
+
+	/* Set block size to the value passed */
+	BlkSize &= XSDPS_BLK_SIZE_MASK;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_BLK_SIZE_OFFSET, BlkSize);
+
+	XSdPs_SetupADMA2DescTbl(InstancePtr, BlkCnt, SCR);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_DAT_DIR_SEL_MASK | XSDPS_TM_DMA_EN_MASK);
+
+	Xil_DCacheInvalidateRange((INTPTR)SCR, 8);
+
+	Status = XSdPs_CmdTransfer(InstancePtr, ACMD51, 0U, BlkCnt);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * Check for transfer complete
+	 * Polling for response for now
+	 */
+	do {
+		StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET);
+		if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+			/* Write to clear error bits */
+			XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_ERR_INTR_STS_OFFSET,
+					XSDPS_ERROR_INTR_ALL_MASK);
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} while ((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+	/* Write to clear bit */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+	Status = (s32)XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to set bus width to 4-bit in card and host
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Change_BusWidth(XSdPs *InstancePtr)
+{
+	s32 Status;
+	u32 StatusReg;
+	u32 Arg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+
+	if (InstancePtr->CardType == XSDPS_CARD_SD) {
+
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD55, InstancePtr->RelCardAddr,
+				0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		InstancePtr->BusWidth = XSDPS_4_BIT_WIDTH;
+
+		Arg = ((u32)InstancePtr->BusWidth);
+
+		Status = XSdPs_CmdTransfer(InstancePtr, ACMD6, Arg, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} else {
+
+		if ((InstancePtr->HC_Version == XSDPS_HC_SPEC_V3)
+				&& (InstancePtr->CardType == XSDPS_CHIP_EMMC)) {
+			/* in case of eMMC data width 8-bit */
+			InstancePtr->BusWidth = XSDPS_8_BIT_WIDTH;
+		} else {
+			InstancePtr->BusWidth = XSDPS_4_BIT_WIDTH;
+		}
+
+		if (InstancePtr->BusWidth == XSDPS_8_BIT_WIDTH) {
+			Arg = XSDPS_MMC_8_BIT_BUS_ARG;
+		} else {
+			Arg = XSDPS_MMC_4_BIT_BUS_ARG;
+		}
+
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD6, Arg, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/* Check for transfer complete */
+		do {
+			StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_NORM_INTR_STS_OFFSET);
+			if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+				/* Write to clear error bits */
+				XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_ERR_INTR_STS_OFFSET,
+						XSDPS_ERROR_INTR_ALL_MASK);
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		} while((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+		/* Write to clear bit */
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+	}
+
+#if defined (__arm__) || defined (__aarch64__)
+
+	usleep(XSDPS_MMC_DELAY_FOR_SWITCH);
+
+#endif
+
+#ifdef __MICROBLAZE__
+
+	/* 2 msec delay */
+	MB_Sleep(2);
+
+#endif
+
+	StatusReg = XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+					XSDPS_HOST_CTRL1_OFFSET);
+
+	/* Width setting in controller */
+	if (InstancePtr->BusWidth == XSDPS_8_BIT_WIDTH) {
+		StatusReg |= XSDPS_HC_EXT_BUS_WIDTH;
+	} else {
+		StatusReg |= XSDPS_HC_WIDTH_MASK;
+	}
+
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL1_OFFSET,
+			(u8)StatusReg);
+
+	Status = (s32)XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to get bus speed supported by card.
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+* @param	ReadBuff - buffer to store function group support data
+*		returned by card.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Get_BusSpeed(XSdPs *InstancePtr, u8 *ReadBuff)
+{
+	s32 Status;
+	u32 StatusReg;
+	u32 Arg;
+	u16 BlkCnt;
+	u16 BlkSize;
+	s32 LoopCnt;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	for (LoopCnt = 0; LoopCnt < 64; LoopCnt++) {
+		ReadBuff[LoopCnt] = 0U;
+	}
+
+	BlkCnt = XSDPS_SWITCH_CMD_BLKCNT;
+	BlkSize = XSDPS_SWITCH_CMD_BLKSIZE;
+	BlkSize &= XSDPS_BLK_SIZE_MASK;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_BLK_SIZE_OFFSET, BlkSize);
+
+	XSdPs_SetupADMA2DescTbl(InstancePtr, BlkCnt, ReadBuff);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_DAT_DIR_SEL_MASK | XSDPS_TM_DMA_EN_MASK);
+
+	Arg = XSDPS_SWITCH_CMD_HS_GET;
+
+	Xil_DCacheInvalidateRange((INTPTR)ReadBuff, 64);
+
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD6, Arg, 1U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * Check for transfer complete
+	 * Polling for response for now
+	 */
+	do {
+		StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET);
+		if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+			/* Write to clear error bits */
+			XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_ERR_INTR_STS_OFFSET,
+					XSDPS_ERROR_INTR_ALL_MASK);
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} while ((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+	/* Write to clear bit */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+	Status = (s32)XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to set high speed in card and host. Changes clock in host accordingly.
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Change_BusSpeed(XSdPs *InstancePtr)
+{
+	s32 Status;
+	u32 StatusReg;
+	u32 Arg;
+	u32 ClockReg;
+	u16 BlkCnt;
+	u16 BlkSize;
+	u8 ReadBuff[64];
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	if (InstancePtr->CardType == XSDPS_CARD_SD) {
+
+		BlkCnt = XSDPS_SWITCH_CMD_BLKCNT;
+		BlkSize = XSDPS_SWITCH_CMD_BLKSIZE;
+		BlkSize &= XSDPS_BLK_SIZE_MASK;
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_BLK_SIZE_OFFSET, BlkSize);
+
+		XSdPs_SetupADMA2DescTbl(InstancePtr, BlkCnt, ReadBuff);
+
+		Xil_DCacheFlushRange((INTPTR)ReadBuff, 64);
+
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_XFER_MODE_OFFSET,
+				XSDPS_TM_DAT_DIR_SEL_MASK | XSDPS_TM_DMA_EN_MASK);
+
+		Arg = XSDPS_SWITCH_CMD_HS_SET;
+
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD6, Arg, 1U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/*
+		 * Check for transfer complete
+		 * Polling for response for now
+		 */
+		do {
+			StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_NORM_INTR_STS_OFFSET);
+			if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+				/* Write to clear error bits */
+				XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_ERR_INTR_STS_OFFSET,
+						XSDPS_ERROR_INTR_ALL_MASK);
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		} while ((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+		/* Write to clear bit */
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+		/* Change the clock frequency to 50 MHz */
+		InstancePtr->BusSpeed = XSDPS_CLK_50_MHZ;
+		Status = XSdPs_Change_ClkFreq(InstancePtr, InstancePtr->BusSpeed);
+		if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+		}
+
+	} else if (InstancePtr->CardType == XSDPS_CARD_MMC) {
+		Arg = XSDPS_MMC_HIGH_SPEED_ARG;
+
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD6, Arg, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/*
+		 * Check for transfer complete
+		 */
+		do {
+			StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_NORM_INTR_STS_OFFSET);
+			if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+				/*
+				 * Write to clear error bits
+				 */
+				XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_ERR_INTR_STS_OFFSET,
+						XSDPS_ERROR_INTR_ALL_MASK);
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		} while ((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+		/*
+		 * Write to clear bit
+		 */
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+		/* Change the clock frequency to 52 MHz */
+		InstancePtr->BusSpeed = XSDPS_CLK_52_MHZ;
+		Status = XSdPs_Change_ClkFreq(InstancePtr, XSDPS_CLK_52_MHZ);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} else {
+		Arg = XSDPS_MMC_HS200_ARG;
+
+		Status = XSdPs_CmdTransfer(InstancePtr, CMD6, Arg, 0U);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		/*
+		 * Check for transfer complete
+		 */
+		do {
+			StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_NORM_INTR_STS_OFFSET);
+			if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+				/*
+				 * Write to clear error bits
+				 */
+				XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+						XSDPS_ERR_INTR_STS_OFFSET,
+						XSDPS_ERROR_INTR_ALL_MASK);
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+			}
+		} while ((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+		/*
+		 * Write to clear bit
+		 */
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+		/* Change the clock frequency to 200 MHz */
+		InstancePtr->BusSpeed = XSDPS_MMC_HS200_MAX_CLK;
+
+		Status = XSdPs_Change_ClkFreq(InstancePtr, InstancePtr->BusSpeed);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+		Status = XSdPs_Execute_Tuning(InstancePtr);
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+#if defined (__arm__) || defined (__aarch64__)
+		/* Program the Tap delays */
+		XSdPs_SetTapDelay(InstancePtr);
+#endif
+	}
+
+#if defined (__arm__) || defined (__aarch64__)
+
+	usleep(XSDPS_MMC_DELAY_FOR_SWITCH);
+
+#endif
+
+#ifdef __MICROBLAZE__
+
+	/* 2 msec delay */
+	MB_Sleep(2);
+
+#endif
+
+	StatusReg = (s32)XSdPs_ReadReg8(InstancePtr->Config.BaseAddress,
+					XSDPS_HOST_CTRL1_OFFSET);
+	StatusReg |= XSDPS_HC_SPEED_MASK;
+	XSdPs_WriteReg8(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL1_OFFSET, (u8)StatusReg);
+
+	Status = (s32)XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to change clock freq to given value.
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+* @param	SelFreq - Clock frequency in Hz.
+*
+* @return	None
+*
+* @note		This API will change clock frequency to the value less than
+*		or equal to the given value using the permissible dividors.
+*
+******************************************************************************/
+s32 XSdPs_Change_ClkFreq(XSdPs *InstancePtr, u32 SelFreq)
+{
+	u16 ClockReg;
+	u16 DivCnt;
+	u16 Divisor = 0U;
+	u16 ExtDivisor;
+	u16 ClkLoopCnt;
+	s32 Status;
+	u16 ReadReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Disable clock */
+	ClockReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_CLK_CTRL_OFFSET);
+	ClockReg &= ~(XSDPS_CC_SD_CLK_EN_MASK | XSDPS_CC_INT_CLK_EN_MASK);
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_CLK_CTRL_OFFSET, ClockReg);
+
+	if (InstancePtr->HC_Version == XSDPS_HC_SPEC_V3) {
+		/* Calculate divisor */
+		for (DivCnt = 0x1U; DivCnt <= XSDPS_CC_EXT_MAX_DIV_CNT;DivCnt++) {
+			if (((InstancePtr->Config.InputClockHz) / DivCnt) <= SelFreq) {
+				Divisor = DivCnt >> 1;
+				break;
+			}
+		}
+
+		if (DivCnt > XSDPS_CC_EXT_MAX_DIV_CNT) {
+			/* No valid divisor found for given frequency */
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} else {
+		/* Calculate divisor */
+		DivCnt = 0x1U;
+		while (DivCnt <= XSDPS_CC_MAX_DIV_CNT) {
+			if (((InstancePtr->Config.InputClockHz) / DivCnt) <= SelFreq) {
+				Divisor = DivCnt / 2U;
+				break;
+			}
+			DivCnt = DivCnt << 1U;
+		}
+
+		if (DivCnt > XSDPS_CC_MAX_DIV_CNT) {
+			/* No valid divisor found for given frequency */
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	}
+
+	/* Set clock divisor */
+	if (InstancePtr->HC_Version == XSDPS_HC_SPEC_V3) {
+		ClockReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_CLK_CTRL_OFFSET);
+		ClockReg &= ~(XSDPS_CC_SDCLK_FREQ_SEL_MASK |
+		XSDPS_CC_SDCLK_FREQ_SEL_EXT_MASK);
+
+		ExtDivisor = Divisor >> 8;
+		ExtDivisor <<= XSDPS_CC_EXT_DIV_SHIFT;
+		ExtDivisor &= XSDPS_CC_SDCLK_FREQ_SEL_EXT_MASK;
+
+		Divisor <<= XSDPS_CC_DIV_SHIFT;
+		Divisor &= XSDPS_CC_SDCLK_FREQ_SEL_MASK;
+		ClockReg |= Divisor | ExtDivisor | (u16)XSDPS_CC_INT_CLK_EN_MASK;
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_CLK_CTRL_OFFSET,
+				ClockReg);
+	} else {
+		ClockReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_CLK_CTRL_OFFSET);
+		ClockReg &= (~XSDPS_CC_SDCLK_FREQ_SEL_MASK);
+
+		Divisor <<= XSDPS_CC_DIV_SHIFT;
+		Divisor &= XSDPS_CC_SDCLK_FREQ_SEL_MASK;
+		ClockReg |= Divisor | (u16)XSDPS_CC_INT_CLK_EN_MASK;
+		XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_CLK_CTRL_OFFSET,
+				ClockReg);
+	}
+
+	/* Wait for internal clock to stabilize */
+	ReadReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_CLK_CTRL_OFFSET);
+	while((ReadReg & XSDPS_CC_INT_CLK_STABLE_MASK) == 0U) {
+		ReadReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_CLK_CTRL_OFFSET);;
+	}
+
+	/* Enable SD clock */
+	ClockReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_CLK_CTRL_OFFSET);
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_CLK_CTRL_OFFSET,
+			ClockReg | XSDPS_CC_SD_CLK_EN_MASK);
+
+	Status = XST_SUCCESS;
+
+RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to send pullup command to card before using DAT line 3(using 4-bit bus)
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Pullup(XSdPs *InstancePtr)
+{
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD55,
+			InstancePtr->RelCardAddr, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	Status = XSdPs_CmdTransfer(InstancePtr, ACMD42, 0U, 0U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* API to get EXT_CSD register of eMMC.
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+* @param	ReadBuff - buffer to store EXT_CSD
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Get_Mmc_ExtCsd(XSdPs *InstancePtr, u8 *ReadBuff)
+{
+	s32 Status;
+	u32 StatusReg;
+	u32 Arg = 0U;
+	u16 BlkCnt;
+	u16 BlkSize;
+	s32 LoopCnt;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	for (LoopCnt = 0; LoopCnt < 512; LoopCnt++) {
+		ReadBuff[LoopCnt] = 0U;
+	}
+
+	BlkCnt = XSDPS_EXT_CSD_CMD_BLKCNT;
+	BlkSize = XSDPS_EXT_CSD_CMD_BLKSIZE;
+	BlkSize &= XSDPS_BLK_SIZE_MASK;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_BLK_SIZE_OFFSET, BlkSize);
+
+	XSdPs_SetupADMA2DescTbl(InstancePtr, BlkCnt, ReadBuff);
+
+	Xil_DCacheInvalidateRange((INTPTR)ReadBuff, 512U);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_DAT_DIR_SEL_MASK | XSDPS_TM_DMA_EN_MASK);
+
+
+	/* Send SEND_EXT_CSD command */
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD8, Arg, 1U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * Check for transfer complete
+	 * Polling for response for now
+	 */
+	do {
+		StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_NORM_INTR_STS_OFFSET);
+		if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+			/* Write to clear error bits */
+			XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_ERR_INTR_STS_OFFSET,
+					XSDPS_ERROR_INTR_ALL_MASK);
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} while ((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+	/* Write to clear bit */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+	Status = (s32)XSdPs_ReadReg(InstancePtr->Config.BaseAddress,
+			XSDPS_RESP0_OFFSET);
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+
+}
+
+
+/*****************************************************************************/
+/**
+*
+* API to UHS-I mode initialization
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+* @param	Mode UHS-I mode
+*
+* @return
+*		- XST_SUCCESS if successful.
+*		- XST_FAILURE if fail.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XSdPs_Uhs_ModeInit(XSdPs *InstancePtr, u8 Mode)
+{
+	s32 Status;
+	u16 StatusReg;
+	u16 CtrlReg;
+	u32 Arg;
+	u16 BlkCnt;
+	u16 BlkSize;
+	u8 ReadBuff[64];
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Drive strength */
+
+	/* Bus speed mode selection */
+	BlkCnt = XSDPS_SWITCH_CMD_BLKCNT;
+	BlkSize = XSDPS_SWITCH_CMD_BLKSIZE;
+	BlkSize &= XSDPS_BLK_SIZE_MASK;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_BLK_SIZE_OFFSET,
+			BlkSize);
+
+	XSdPs_SetupADMA2DescTbl(InstancePtr, BlkCnt, ReadBuff);
+
+	Xil_DCacheFlushRange((INTPTR)ReadBuff, 64);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_DAT_DIR_SEL_MASK | XSDPS_TM_DMA_EN_MASK);
+
+	switch (Mode) {
+	case 0U:
+		Arg = XSDPS_SWITCH_CMD_SDR12_SET;
+		InstancePtr->BusSpeed = XSDPS_SD_SDR12_MAX_CLK;
+		break;
+	case 1U:
+		Arg = XSDPS_SWITCH_CMD_SDR25_SET;
+		InstancePtr->BusSpeed = XSDPS_SD_SDR25_MAX_CLK;
+		break;
+	case 2U:
+		Arg = XSDPS_SWITCH_CMD_SDR50_SET;
+		InstancePtr->BusSpeed = XSDPS_SD_SDR50_MAX_CLK;
+		break;
+	case 3U:
+		Arg = XSDPS_SWITCH_CMD_SDR104_SET;
+		InstancePtr->BusSpeed = XSDPS_SD_SDR104_MAX_CLK;
+		break;
+	case 4U:
+		Arg = XSDPS_SWITCH_CMD_DDR50_SET;
+		InstancePtr->BusSpeed = XSDPS_SD_DDR50_MAX_CLK;
+		break;
+	default:
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+		break;
+	}
+
+	Status = XSdPs_CmdTransfer(InstancePtr, CMD6, Arg, 1U);
+	if (Status != XST_SUCCESS) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * Check for transfer complete
+	 * Polling for response for now
+	 */
+	do {
+		StatusReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_NORM_INTR_STS_OFFSET);
+		if ((StatusReg & XSDPS_INTR_ERR_MASK) != 0U) {
+			/* Write to clear error bits */
+			XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+					XSDPS_ERR_INTR_STS_OFFSET, XSDPS_ERROR_INTR_ALL_MASK);
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+	} while ((StatusReg & XSDPS_INTR_TC_MASK) == 0U);
+
+	/* Write to clear bit */
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_NORM_INTR_STS_OFFSET, XSDPS_INTR_TC_MASK);
+
+
+	/* Current limit */
+
+	/* Set UHS mode in controller */
+	CtrlReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL2_OFFSET);
+	CtrlReg &= (u16)(~XSDPS_HC2_UHS_MODE_MASK);
+	CtrlReg |= Mode;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL2_OFFSET, CtrlReg);
+
+	/* Change the clock frequency */
+	Status = XSdPs_Change_ClkFreq(InstancePtr, InstancePtr->BusSpeed);
+	if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+	}
+
+	if((Mode == XSDPS_UHS_SPEED_MODE_SDR104) ||
+			(Mode == XSDPS_UHS_SPEED_MODE_DDR50)) {
+		/* Send tuning pattern */
+		Status = XSdPs_Execute_Tuning(InstancePtr);
+		if (Status != XST_SUCCESS) {
+				Status = XST_FAILURE;
+				goto RETURN_PATH;
+		}
+	}
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH:
+		return Status;
+}
+
+static s32 XSdPs_Execute_Tuning(XSdPs *InstancePtr)
+{
+	s32 Status;
+	u32 StatusReg;
+	u32 Arg;
+	u16 BlkCnt;
+	u16 BlkSize;
+	s32 LoopCnt;
+	u16 CtrlReg;
+	u8 TuningCount;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	BlkCnt = XSDPS_TUNING_CMD_BLKCNT;
+	BlkSize = XSDPS_TUNING_CMD_BLKSIZE;
+	if(InstancePtr->BusWidth == XSDPS_8_BIT_WIDTH)
+	{
+		BlkSize = BlkSize*2U;
+	}
+	BlkSize &= XSDPS_BLK_SIZE_MASK;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_BLK_SIZE_OFFSET,
+			BlkSize);
+
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress, XSDPS_XFER_MODE_OFFSET,
+			XSDPS_TM_DAT_DIR_SEL_MASK);
+
+	CtrlReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_HOST_CTRL2_OFFSET);
+	CtrlReg |= XSDPS_HC2_EXEC_TNG_MASK;
+	XSdPs_WriteReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_HOST_CTRL2_OFFSET, CtrlReg);
+
+	for (TuningCount = 0U; TuningCount < MAX_TUNING_COUNT; TuningCount++) {
+
+		if (InstancePtr->CardType == XSDPS_CARD_SD) {
+			Status = XSdPs_CmdTransfer(InstancePtr, CMD19, 0U, 1U);
+		} else {
+			Status = XSdPs_CmdTransfer(InstancePtr, CMD21, 0U, 1U);
+		}
+
+		if (Status != XST_SUCCESS) {
+			Status = XST_FAILURE;
+			goto RETURN_PATH;
+		}
+
+		if ((XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_HOST_CTRL2_OFFSET) & XSDPS_HC2_EXEC_TNG_MASK) == 0U) {
+			break;
+		}
+	}
+
+	if ((XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+			XSDPS_HOST_CTRL2_OFFSET) & XSDPS_HC2_SAMP_CLK_SEL_MASK) == 0U) {
+		Status = XST_FAILURE;
+		goto RETURN_PATH;
+	}
+
+	/*
+	 * As per controller erratum, program the "SDCLK Frequency
+	 * Select" of clock control register with a value, say
+	 * clock/2. Wait for the Internal clock stable and program
+	 * the desired frequency.
+	 */
+	CtrlReg = XSdPs_ReadReg16(InstancePtr->Config.BaseAddress,
+				XSDPS_HOST_CTRL2_OFFSET);
+	if ((CtrlReg & XSDPS_HC2_SAMP_CLK_SEL_MASK) != 0U) {
+		Status = XSdPs_Change_ClkFreq(InstancePtr, InstancePtr->BusSpeed/2);
+		if (Status != XST_SUCCESS) {
+			goto RETURN_PATH ;
+		}
+		Status = XSdPs_Change_ClkFreq(InstancePtr, InstancePtr->BusSpeed);
+		if (Status != XST_SUCCESS) {
+			goto RETURN_PATH ;
+		}
+
+	}
+
+	Status = XST_SUCCESS;
+
+	RETURN_PATH: return Status;
+
+}
+
+#if defined (__arm__) || defined (__aarch64__)
+/*****************************************************************************/
+/**
+*
+* API to set Tap Delay w.r.t speed modes
+*
+*
+* @param	InstancePtr is a pointer to the XSdPs instance.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+void XSdPs_SetTapDelay(XSdPs *InstancePtr)
+{
+	u32 DllCtrl, TapDelay;
+	if (InstancePtr->Config.DeviceId == XPAR_XSDPS_0_DEVICE_ID) {
+		DllCtrl = XSdPs_ReadReg(XPS_SYS_CTRL_BASEADDR, SD_DLL_CTRL);
+		DllCtrl |= SD0_DLL_RST;
+		XSdPs_WriteReg(XPS_SYS_CTRL_BASEADDR, SD_DLL_CTRL, DllCtrl);
+		if(InstancePtr->BusSpeed == XSDPS_MMC_HS200_MAX_CLK) {
+			/* Program the ITAPDLY */
+			TapDelay = XSdPs_ReadReg(XPS_SYS_CTRL_BASEADDR, SD_ITAPDLY);
+			TapDelay |= SD0_ITAPCHGWIN;
+			XSdPs_WriteReg(XPS_SYS_CTRL_BASEADDR, SD_ITAPDLY, TapDelay);
+			TapDelay |= SD0_ITAPDLYENA;
+			XSdPs_WriteReg(XPS_SYS_CTRL_BASEADDR, SD_ITAPDLY, TapDelay);
+			TapDelay &= ~SD0_ITAPCHGWIN;
+			XSdPs_WriteReg(XPS_SYS_CTRL_BASEADDR, SD_ITAPDLY, TapDelay);
+			/* Program the OTAPDLY */
+			TapDelay = XSdPs_ReadReg(XPS_SYS_CTRL_BASEADDR, SD_OTAPDLYSEL);
+			TapDelay |= SD0_OTAPDLYENA;
+			XSdPs_WriteReg(XPS_SYS_CTRL_BASEADDR, SD_OTAPDLYSEL, TapDelay);
+			TapDelay |= SD0_OTAPDLYSEL_HS200;
+			XSdPs_WriteReg(XPS_SYS_CTRL_BASEADDR, SD_OTAPDLYSEL, TapDelay);
+		}
+		DllCtrl &= ~SD0_DLL_RST;
+		XSdPs_WriteReg(XPS_SYS_CTRL_BASEADDR, SD_DLL_CTRL, DllCtrl);
+	}
+}
+#endif
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_sinit.c
new file mode 100644
index 000000000..59657a7b3
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sdps_v2_7/src/xsdps_sinit.c
@@ -0,0 +1,99 @@
+/******************************************************************************
+*
+* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsdps_sinit.c
+* @addtogroup sdps_v2_5
+* @{
+*
+* The implementation of the XSdPs component's static initialization
+* functionality.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ---    -------- -----------------------------------------------
+* 1.00a hk/sg  10/17/13 Initial release
+*       kvn    07/15/15 Modified the code according to MISRAC-2012.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+#include "xstatus.h"
+#include "xsdps.h"
+#include "xparameters.h"
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+extern XSdPs_Config XSdPs_ConfigTable[];
+
+/*****************************************************************************/
+/**
+*
+* Looks up the device configuration based on the unique device ID. A table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId contains the ID of the device to look up the
+*		configuration for.
+*
+* @return
+*
+* A pointer to the configuration found or NULL if the specified device ID was
+* not found. See xsdps.h for the definition of XSdPs_Config.
+*
+* @note		None.
+*
+******************************************************************************/
+XSdPs_Config *XSdPs_LookupConfig(u16 DeviceId)
+{
+	XSdPs_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index = 0U; Index < (u32)XPAR_XSDPS_NUM_INSTANCES; Index++) {
+		if (XSdPs_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XSdPs_ConfigTable[Index];
+			break;
+		}
+	}
+	return (XSdPs_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/Makefile
new file mode 100644
index 000000000..ca8621a76
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/Makefile
@@ -0,0 +1,74 @@
+###############################################################################
+#
+# Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# Use of the Software is limited solely to applications:
+# (a) running on a Xilinx device, or
+# (b) that interact with a Xilinx device through a bus or interconnect.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+# XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+# Except as contained in this notice, the name of the Xilinx shall not be used
+# in advertising or otherwise to promote the sale, use or other dealings in
+# this Software without prior written authorization from Xilinx.
+#
+###############################################################################
+
+include config.make
+CC=$(COMPILER)
+AR=$(ARCHIVER)
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(subst -pg, -DPROFILING, $(COMPILER_FLAGS))
+ECC_FLAGS = $(subst -pg, -DPROFILING, $(EXTRA_COMPILER_FLAGS))
+
+ifeq ($(notdir $(CC)), armr5-none-eabi-gcc)
+ECC_FLAGS	+= -nostartfiles\
+		  -mfloat-abi=soft\
+		  -mfpu=vfpv3-d16
+endif
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+INCLUDEFILES=*.h
+INCLUDEFILES+=includes_ps/*.h
+
+libs: $(LIBS)
+
+standalone_libs: $(LIBSOURCES)
+	echo "Compiling standalone R5"
+	$(CC) $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) $^
+	$(AR) -r ${RELEASEDIR}/${LIB} ${OUTS}
+
+.PHONY: include
+include: standalone_includes
+
+standalone_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OUTS}
+	$(MAKE) -C COMPILER_FLAGS="$(COMPILER_FLAGS)" EXTRA_COMPILER_FLAGS="$(EXTRA_COMPILER_FLAGS)" COMPILER="$(CC)" ARCHIVER="$(AR)" clean
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_exit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_exit.c
new file mode 100644
index 000000000..0086c59b0
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_exit.c
@@ -0,0 +1,87 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include "xil_types.h"
+
+/*
+ * _exit - Does not return.
+ *
+ * If R5 application runs in lock-step mode, the comparators are enabled by
+ * boot code after resetting the debug logic. The debugger does not have access
+ * while the R5 application is being run to avoid any intervention. After the
+ * application runs, the debug logic need to be taken out of reset for the
+ * debugger to gain access. Therefore the debug logic is enabled and
+ * comparators are disabled in case of R5 running in lock-step mode with
+ * debug logic reset in JTAG boot mode.
+ */
+
+#define RPU_GLBL_CNTL_REG	0xFF9A0000U
+#define RPU_ERR_INJ_REG		0xFF9A0020U
+#define RST_LPD_DBG_REG		0xFF5E0240U
+#define BOOT_MODE_USER_REG	0xFF5E0200U
+
+#define lock_step 			0x00000008U
+#define fault_log_enable	0x00000101U
+#define debug_reset 		0x00000032U
+#define jtag_boot			0x0000000FU
+__attribute__((weak)) void _exit (sint32 status)
+{
+
+	/*
+	 * Enables the debug logic and disable the comparators
+	 * when in JTAG boot mode and R5 is in lock-step mode
+	 * if the fault log is enabled
+	 */
+	u32 debug_reg, err_inj_reg;
+	if((Xil_In32(BOOT_MODE_USER_REG) & jtag_boot) == 0){
+		if((Xil_In32(RPU_GLBL_CNTL_REG) & lock_step) == 0){
+			if((Xil_In32(RPU_ERR_INJ_REG) & fault_log_enable) != 0) {
+				if((Xil_In32(RST_LPD_DBG_REG) & debug_reset) != 0) {
+					err_inj_reg = Xil_In32(RPU_ERR_INJ_REG);
+					err_inj_reg = err_inj_reg & (~fault_log_enable);
+					Xil_Out32(RPU_ERR_INJ_REG, err_inj_reg);
+
+					debug_reg = Xil_In32(RST_LPD_DBG_REG);
+					debug_reg = debug_reg & (~debug_reset);
+					Xil_Out32(RST_LPD_DBG_REG, debug_reg);
+				}
+			}
+		}
+	}
+
+  (void)status;
+  while (1)
+  {
+     __asm__("wfi");
+  }
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_open.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_open.c
new file mode 100644
index 000000000..b2809c5d0
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_open.c
@@ -0,0 +1,53 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 _open(const char8 *buf, s32 flags, s32 mode);
+}
+#endif
+
+/*
+ * _open -- open a file descriptor. We don't have a filesystem, so
+ *         we return an error.
+ */
+__attribute__((weak)) s32 _open(const char8 *buf, s32 flags, s32 mode)
+{
+  (void *)buf;
+  (void)flags;
+  (void)mode;
+  errno = EIO;
+  return (-1);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_sbrk.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_sbrk.c
new file mode 100644
index 000000000..bcec069c8
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/_sbrk.c
@@ -0,0 +1,70 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include "xil_types.h"
+
+extern u8 _heap_start[];
+extern u8 _heap_end[];
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) caddr_t _sbrk ( s32 incr );
+}
+#endif
+
+__attribute__((weak)) caddr_t _sbrk ( s32 incr )
+{
+  static u8 *heap = NULL;
+  u8 *prev_heap;
+  static u8 *HeapEndPtr = (u8 *)&_heap_end;
+  caddr_t Status;
+
+  if (heap == NULL) {
+    heap = (u8 *)&_heap_start;
+  }
+  prev_heap = heap;
+
+  heap += incr;
+
+  if (heap > HeapEndPtr){
+	  Status = (caddr_t) -1;
+  }
+  else if (prev_heap != NULL) {
+	  Status = (caddr_t) ((void *)prev_heap);
+  }
+  else {
+	  Status = (caddr_t) -1;
+  }
+
+  return Status;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/abort.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/abort.c
new file mode 100644
index 000000000..122c25bbd
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/abort.c
@@ -0,0 +1,42 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include 
+
+/*
+ * abort -- go out via exit...
+ */
+__attribute__((weak)) void abort(void)
+{
+  _exit(1);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/asm_vectors.S b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/asm_vectors.S
new file mode 100644
index 000000000..138c22e89
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/asm_vectors.S
@@ -0,0 +1,121 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file asm_vectors.s
+*
+* This file contains the initial vector table for the Cortex R5 processor
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------- -------- ---------------------------------------------------
+* 5.00  pkp	02/10/14 Initial version
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+.org 0
+.text
+
+.globl _boot
+.globl _vector_table
+
+.globl FIQInterrupt
+.globl IRQInterrupt
+.globl SWInterrupt
+.globl DataAbortInterrupt
+.globl PrefetchAbortInterrupt
+
+.globl IRQHandler
+.globl prof_pc
+
+.section .vectors, "a"
+_vector_table:
+	ldr	pc,=_boot
+	ldr	pc,=Undefined
+	ldr	pc,=SVCHandler
+	ldr	pc,=PrefetchAbortHandler
+	ldr	pc,=DataAbortHandler
+	NOP	/* Placeholder for address exception vector*/
+	ldr	pc,=IRQHandler
+	ldr	pc,=FIQHandler
+
+.text
+IRQHandler:					/* IRQ vector handler */
+	stmdb	sp!,{r0-r3,r12,lr}		/* state save from compiled code*/
+	bl	IRQInterrupt			/* IRQ vector */
+	ldmia	sp!,{r0-r3,r12,lr}		/* state restore from compiled code */
+	subs	pc, lr, #4			/* adjust return */
+
+FIQHandler:					/* FIQ vector handler */
+	stmdb	sp!,{r0-r3,r12,lr}		/* state save from compiled code */
+FIQLoop:
+	bl	FIQInterrupt			/* FIQ vector */
+	ldmia	sp!,{r0-r3,r12,lr}		/* state restore from compiled code */
+	subs	pc, lr, #4			/* adjust return */
+
+Undefined:					/* Undefined handler */
+	stmdb	sp!,{r0-r3,r12,lr}		/* state save from compiled code */
+	ldmia	sp!,{r0-r3,r12,lr}		/* state restore from compiled code */
+	b	_prestart
+	movs	pc, lr
+
+SVCHandler:					/* SWI handler */
+	stmdb	sp!,{r0-r3,r12,lr}		/* state save from compiled code */
+	tst	r0, #0x20			/* check the T bit */
+	ldrneh	r0, [lr,#-2]			/* Thumb mode */
+	bicne	r0, r0, #0xff00			/* Thumb mode */
+	ldreq	r0, [lr,#-4]			/* ARM mode */
+	biceq	r0, r0, #0xff000000		/* ARM mode */
+	bl	SWInterrupt			/* SWInterrupt: call C function here */
+	ldmia	sp!,{r0-r3,r12,lr}		/* state restore from compiled code */
+	movs	pc, lr				/* adjust return */
+
+DataAbortHandler:				/* Data Abort handler */
+	stmdb	sp!,{r0-r3,r12,lr}		/* state save from compiled code */
+	bl	DataAbortInterrupt		/*DataAbortInterrupt :call C function here */
+	ldmia	sp!,{r0-r3,r12,lr}		/* state restore from compiled code */
+	subs	pc, lr, #8			/* adjust return */
+
+PrefetchAbortHandler:				/* Prefetch Abort handler */
+	stmdb	sp!,{r0-r3,r12,lr}		/* state save from compiled code */
+	bl	PrefetchAbortInterrupt		/* PrefetchAbortInterrupt: call C function here */
+	ldmia	sp!,{r0-r3,r12,lr}		/* state restore from compiled code */
+	subs	pc, lr, #4			/* adjust return */
+
+
+.end
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/boot.S b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/boot.S
new file mode 100644
index 000000000..724f9616f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/boot.S
@@ -0,0 +1,300 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file boot.S
+*
+* This file contains the initial startup code for the Cortex R5 processor
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 5.04	pkp  09/11/15 Disabled ACTLR.DBWR bit to avoid potential R5 deadlock
+*		      for errata 780125
+* 5.04 pkp   02/04/16 Enabled the fault log for lock-step mode
+* 5.04 pkp   02/25/16 Initialized the banked registers for various modes,
+*		      initialized floating point registers and enabled the
+*		      cache ECC check before enabling the fault log for
+*		      lock step mode
+* 5.04 pkp   03/24/16 Reset the dbg_lpd_reset before enabling the fault log
+*		      to avoid intervention for lock-step mode
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+#include "xparameters.h"
+
+
+.global _prestart
+.global _boot
+.global __stack
+.global __irq_stack
+.global __supervisor_stack
+.global __abort_stack
+.global __fiq_stack
+.global __undef_stack
+.global _vector_table
+
+
+/* Stack Pointer locations for boot code */
+.set Undef_stack,	__undef_stack
+.set FIQ_stack,		__fiq_stack
+.set Abort_stack,	__abort_stack
+.set SPV_stack,		__supervisor_stack
+.set IRQ_stack,		__irq_stack
+.set SYS_stack,		__stack
+
+.set vector_base,	_vector_table
+
+.set RPU_GLBL_CNTL,	0xFF9A0000
+.set RPU_ERR_INJ,	0xFF9A0020
+.set RST_LPD_DBG,	0xFF5E0240
+.set fault_log_enable,	0x101
+
+.section .boot,"axS"
+
+
+/* this initializes the various processor modes */
+
+_prestart:
+_boot:
+
+OKToRun:
+
+/* Initialize processor registers to 0 */
+	mov	r0,#0
+	mov	r1,#0
+	mov	r2,#0
+	mov	r3,#0
+	mov	r4,#0
+	mov	r5,#0
+	mov	r6,#0
+	mov	r7,#0
+	mov	r8,#0
+	mov	r9,#0
+	mov	r10,#0
+	mov	r11,#0
+	mov	r12,#0
+
+/* Initialize stack pointer and banked registers for various mode */
+	mrs	r0, cpsr			/* get the current PSR */
+	mvn	r1, #0x1f			/* set up the irq stack pointer */
+	and	r2, r1, r0
+	orr	r2, r2, #0x12			/* IRQ mode */
+	msr	cpsr, r2
+	ldr	r13,=IRQ_stack			/* IRQ stack pointer */
+	mov 	r14,#0
+
+	mrs	r0, cpsr			/* get the current PSR */
+	mvn	r1, #0x1f			/* set up the supervisor stack pointer */
+	and	r2, r1, r0
+	orr	r2, r2, #0x13			/* supervisor mode */
+	msr	cpsr, r2
+	ldr	r13,=SPV_stack			/* Supervisor stack pointer */
+	mov 	r14,#0
+
+	mrs	r0, cpsr			/* get the current PSR */
+	mvn	r1, #0x1f			/* set up the Abort  stack pointer */
+	and	r2, r1, r0
+	orr	r2, r2, #0x17			/* Abort mode */
+	msr	cpsr, r2
+	ldr	r13,=Abort_stack		/* Abort stack pointer */
+	mov 	r14,#0
+
+	mrs	r0, cpsr			/* get the current PSR */
+	mvn	r1, #0x1f			/* set up the FIQ stack pointer */
+	and	r2, r1, r0
+	orr	r2, r2, #0x11			/* FIQ mode */
+	msr	cpsr, r2
+	mov 	r8, #0
+	mov 	r9, #0
+	mov 	r10, #0
+	mov 	r11, #0
+	mov 	r12, #0
+	ldr	r13,=FIQ_stack			/* FIQ stack pointer */
+	mov 	r14,#0
+
+	mrs	r0, cpsr			/* get the current PSR */
+	mvn	r1, #0x1f			/* set up the Undefine stack pointer */
+	and	r2, r1, r0
+	orr	r2, r2, #0x1b			/* Undefine mode */
+	msr	cpsr, r2
+	ldr	r13,=Undef_stack		/* Undefine stack pointer */
+	mov 	r14,#0
+
+	mrs	r0, cpsr			/* get the current PSR */
+	mvn	r1, #0x1f			/* set up the system stack pointer */
+	and	r2, r1, r0
+	orr	r2, r2, #0x1F			/* SYS mode */
+	msr	cpsr, r2
+	ldr	r13,=SYS_stack			/* SYS stack pointer */
+	mov 	r14,#0
+
+/*
+ * Enable access to VFP by enabling access to Coprocessors 10 and 11.
+ * Enables Full Access i.e. in both privileged and non privileged modes
+ */
+	mrc     p15, 0, r0, c1, c0, 2      	/* Read Coprocessor Access Control Register (CPACR) */
+        orr     r0, r0, #(0xF << 20)       	/* Enable access to CP 10 & 11 */
+        mcr     p15, 0, r0, c1, c0, 2      	/* Write Coprocessor Access Control Register (CPACR) */
+        isb
+
+/* enable fpu access  */
+	vmrs	r3, FPEXC
+	orr	r1, r3, #(1<<30)
+	vmsr	FPEXC, r1
+
+/* clear the floating point register*/
+	mov	r1,#0
+	vmov	d0,r1,r1
+	vmov	d1,r1,r1
+	vmov	d2,r1,r1
+	vmov	d3,r1,r1
+	vmov	d4,r1,r1
+	vmov	d5,r1,r1
+	vmov	d6,r1,r1
+	vmov	d7,r1,r1
+	vmov	d8,r1,r1
+	vmov	d9,r1,r1
+	vmov	d10,r1,r1
+	vmov	d11,r1,r1
+	vmov	d12,r1,r1
+	vmov	d13,r1,r1
+	vmov	d14,r1,r1
+	vmov	d15,r1,r1
+
+/* restore previous value for fpu access */
+	vmsr	FPEXC,r3
+
+/* Disable MPU and caches */
+        mrc     p15, 0, r0, c1, c0, 0       	/* Read CP15 Control Register*/
+        bic     r0, r0, #0x05               	/* Disable MPU (M bit) and data cache (C bit) */
+        bic     r0, r0, #0x1000             	/* Disable instruction cache (I bit) */
+        dsb                                 	/* Ensure all previous loads/stores have completed */
+        mcr     p15, 0, r0, c1, c0, 0       	/* Write CP15 Control Register */
+        isb                                 	/* Ensure subsequent insts execute wrt new MPU settings */
+
+/* Disable Branch prediction, TCM ECC checks */
+        mrc     p15, 0, r0, c1, c0, 1       	/* Read ACTLR */
+        orr     r0, r0, #(0x1 << 17)        	/* Enable RSDIS bit 17 to disable the return stack */
+        orr     r0, r0, #(0x1 << 16)        	/* Clear BP bit 15 and set BP bit 16:*/
+        bic     r0, r0, #(0x1 << 15)        	/* Branch always not taken and history table updates disabled*/
+        bic     r0, r0, #(0x1 << 27)		/* Disable B1TCM ECC check */
+        bic     r0, r0, #(0x1 << 26)		/* Disable B0TCM ECC check */
+        bic     r0, r0, #(0x1 << 25)		/* Disable ATCM ECC check */
+	orr	r0, r0, #(0x1 << 5)		/* Enable ECC with no forced write through with [5:3]=b'101*/
+	bic 	r0, r0, #(0x1 << 4)
+	orr	r0, r0, #(0x1 << 3)
+        mcr     p15, 0, r0, c1, c0, 1       	/* Write ACTLR*/
+	dsb				    	/* Complete all outstanding explicit memory operations*/
+
+/* Invalidate caches */
+	mov	r0,#0				/* r0 = 0  */
+	dsb
+	mcr	p15, 0, r0, c7, c5, 0		/* invalidate icache */
+	mcr 	p15, 0, r0, c15, c5, 0      	/* Invalidate entire data cache*/
+	isb
+
+/* enable fault log for lock step */
+	ldr	r0,=RPU_GLBL_CNTL
+	ldr	r1, [r0]
+	ands	r1, r1, #0x8
+/* branch to initialization if split mode*/
+	bne 	init
+/* reset the debug logic */
+	ldr	r0,=RST_LPD_DBG
+	ldr	r1, [r0]
+	orr	r1, r1, #(0x1 << 1)
+	orr	r1, r1, #(0x1 << 4)
+	orr	r1, r1, #(0x1 << 5)
+	str	r1, [r0]
+/* enable fault log */
+	ldr	r0,=RPU_ERR_INJ
+	ldr	r1,=fault_log_enable
+	ldr	r2, [r0]
+	orr	r2, r2, r1
+	str	r2, [r0]
+	nop
+	nop
+
+init:
+	bl 	Init_MPU		/* Initialize MPU */
+
+/* Enable Branch prediction */
+	mrc     p15, 0, r0, c1, c0, 1       /* Read ACTLR*/
+        bic     r0, r0, #(0x1 << 17)        /* Clear RSDIS bit 17 to enable return stack*/
+        bic     r0, r0, #(0x1 << 16)        /* Clear BP bit 15 and BP bit 16:*/
+        bic     r0, r0, #(0x1 << 15)        /* Normal operation, BP is taken from the global history table.*/
+        orr	r0, r0, #(0x1 << 14)	    /* Disable DBWR for errata 780125 */
+	mcr     p15, 0, r0, c1, c0, 1       /* Write ACTLR*/
+
+/* Enable icahce and dcache */
+	mrc 	p15,0,r1,c1,c0,0
+	ldr	r0, =0x1005
+	orr 	r1,r1,r0
+	dsb
+	mcr	p15,0,r1,c1,c0,0		/* Enable cache  */
+	isb					/* isb	flush prefetch buffer */
+
+/* Warning message to be removed after 2016.1 */
+/* USEAMP was introduced in 2015.4 with ZynqMP and caused confusion with USE_AMP */
+#ifdef USEAMP
+#warning "-DUSEAMP=1 is deprecated, use -DVEC_TABLE_IN_OCM instead to set vector table in OCM"
+#endif
+
+/* Set vector table in TCM/LOVEC */
+#ifndef VEC_TABLE_IN_OCM
+	mrc	p15, 0, r0, c1, c0, 0
+	mvn	r1, #0x2000
+	and	r0, r0, r1
+	mcr	p15, 0, r0, c1, c0, 0
+#endif
+
+/* enable asynchronous abort exception */
+	mrs	r0, cpsr
+	bic	r0, r0, #0x100
+	msr	cpsr_xsf, r0
+
+        b 	_startup                       /* jump to C startup code */
+
+
+.Ldone:	b	.Ldone				/* Paranoia: we should never get here */
+
+
+.end
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/bspconfig.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/bspconfig.h
new file mode 100644
index 000000000..4dd178f04
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/bspconfig.h
@@ -0,0 +1,40 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Configurations for Standalone BSP
+*
+*******************************************************************/
+
+#define MICROBLAZE_PVR_NONE
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/changelog.txt b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/changelog.txt
new file mode 100644
index 000000000..ad9c771e1
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/changelog.txt
@@ -0,0 +1,324 @@
+/*****************************************************************************
+ * MODIFICATION HISTORY:
+ *
+ * Ver   Who  Date     Changes
+ * ----- ---- -------- ---------------------------------------------------
+  * 3.02a sdm  05/30/11 Added Xuint64 typedef and XUINT64_MSW/XUINT64_LSW macros
+ * 3.02a sdm  06/27/11 Added INST_SYNC and DATA_SYNC macros for all the CPUs
+ * 3.02a sdm  07/07/11 Updated ppc440 boot.S to set guarded bit for all but
+ *                     cacheable regions
+ *                     Update ppc440/xil_cache.c to use CACHEABLE_REGION_MASK
+ *                     generated by the cpu driver, for enabling caches
+ * 3.02a sdm  07/08/11 Updated microblaze cache flush APIs based on write-back/
+ *                     write-thru caches
+ * 3.03a sdm  08/20/11 Updated the tag/data RAM latency values for L2CC
+ *		       Updated the MMU table to mark OCM in high address space
+ *		       as inner cacheable and reserved space as Invalid
+ * 3.03a sdm  08/20/11 Changes to support FreeRTOS
+ *		       Updated the MMU table to mark upper half of the DDR as
+ *		       non-cacheable
+ *		       Setup supervisor and abort mode stacks
+ *		       Do not initialize/enable L2CC in case of AMP
+ *		       Initialize UART1 for 9600bps in case of AMP
+ * 3.03a sdm  08/27/11 Setup abort and supervisor mode stacks and don't init SMC
+ *		       in case of AMP
+ * 3.03a sdm  09/14/11 Added code for performance monitor and L2CC event
+ *		       counters
+ * 3.03a sdm  11/08/11 Updated microblaze xil_cache.h file to include
+ *		       xparameters.h file for CR630532 -  Xil_DCacheFlush()/
+ *		       Xil_DCacheFlushRange() functions in standalone BSP v3_02a
+ *		       for MicroBlaze will invalidate data in the cache instead
+ *		       of flushing it for writeback caches
+ * 3.04a sdm  11/21/11 Updated to initialize stdio device for 115200bps, for PS7
+ * 3.04a sdm  01/02/12 Updated to clear cp15 regs with unknown reset values
+ *		       Remove redundant dsb/dmb instructions in cache maintenance
+ *		       APIs
+ *		       Remove redundant dsb in mcr instruction
+ * 3.04a sdm  01/13/12 Updated MMU table to mark DDR memory as Shareable
+ * 3.05a sdm  02/02/12 Removed some of the defines as they are being generated through
+ *                     driver tcl in xparameters.h. Update the gcc/translationtable.s
+ *                     for the QSPI complete address range - DT644567
+ *                     Removed profile directory for armcc compiler and changed
+ *                     profiling setting to false in standalone_v2_1_0.tcl file
+ *                     Deleting boot.S file after preprocessing for armcc compiler
+ * 3.05a asa  03/11/12 Updated the function Xil_EnableMMU in file xil_mmu.c to
+ *		       invalidate the caches before enabling back the MMU and
+ *		       D cache.
+ * 3.05a asa  04/15/12 Updated the function Xil_SetTlbAttributes in file
+ *		       xil_mmu.c. Now we invalidate UTLB, Branch predictor
+ *		       array, flush the D-cache before changing the attributes
+ *		       in translation table. The user need not call Xil_DisableMMU
+ *		       before calling Xil_SetTlbAttributes.
+ * 3.06a asa/ 06/17/12 Removed the UART initialization for Zynq. For PEEP, the UART
+ *	 sgd	       initialization is present. Changes for this were done in
+ *		       uart.c and xil-crt0.s.
+ *		       Made changes in xil_io.c to use volatile pointers.
+ *		       Made changes in xil_mmu.c to correct the function
+ *		       Xil_SetTlbAttributes.
+ *		       Changes are made xil-crt0.s to initialize the static
+ *		       C++ constructors.
+ *		       Changes are made in boot.s, to fix the TTBR settings,
+ *		       correct the L2 Cache Auxiliary register settings, L2 cache
+ *		       latency settings.
+ * 3.07a asa/ 07/16/12 Made changes in cortexa9/xtime_l.c, xtime_l.h, sleep.c
+ *	 sgd	       usleep.c to use global timer intstead of CP15.
+ *		       Made changes in cortexa9/gcc/translation_table.s to map
+ *		       the peripheral devices as shareable device memory.
+ *		       Made changes in cortexa9/gcc/xil-crt0.s to initialize
+ *		       the global timer.
+ *		       Made changes in cortexa9/armcc/boot.S to initialize
+ *		       the global timer.
+ *		       Made changes in cortexa9/armcc/translation_table.s to
+ *		       map the peripheral devices as shareable device memory.
+ *		       Made changes in cortexa9/gcc/boot.S to optimize the
+ *		       L2 cache settings. Changes the section properties for
+ *		       ".mmu_tbl" and ".boot" sections in cortexa9/gcc/boot.S
+ *			and cortexa9/gcc/translation_table.S.
+ *		       Made changes in cortexa9/xil_cache.c to change the
+ *		       cache invalidation order.
+ * 3.07a asa  08/17/12 Made changes across files for Cortexa9 to remove
+ *		       compilation/linking issues for C++ compiler.
+ *		       Made changes in mb_interface.h to remove compilation/
+ *		       linking issues for C++ compiler.
+ *		       Added macros for swapb and swaph microblaze instructions
+ *		       mb_interface.h
+ *		       Remove barrier usage (SYNCHRONIZE_IO) from xil_io.c
+ *		       for CortexA9.
+ * 3.07a asa  08/30/12 Updated for CR 675636 to provide the L2 Base Address
+ * 3.07a asa  08/31/12 Added xil_printf.h include
+ * 3.07a sgd  09/18/12 Corrected the L2 cache enable settings
+ *				Corrected L2 cache sequence disable sequence
+ * 3.07a sgd  10/19/12 SMC NOR and SRAM initialization with compiler option
+ * 3.09a asa  01/25/13 Updated to push and pop neon registers into stack for
+ *		       irq/fiq handling.
+ *		       Relocated COUNTS_PER_SECOND from sleep.c to xtime_l.h. This
+ *		       fixes the CR #692094.
+ * 3.09a sgd  02/14/13 Fix for CRs 697094 (SI#687034) and 675552.
+ * 3.10a srt  04/18/13 Implemented ARM Erratas.
+ *		       Cortex A9 Errata - 742230, 743622, 775420, 794073
+ *		       L2Cache PL310 Errata - 588369, 727915, 759370
+ *		       Please refer to file 'xil_errata.h' for errata
+ *		       description.
+ * 3.10a asa  05/04/13 Added support for L2 cache in MicroBlaze BSP. The older
+ *		       cache APIs were corresponding to only Layer 1 cache
+ *		       memories. New APIs were now added and the existing cache
+ *		       related APIs were changed to provide a uniform interface
+ *		       to flush/invalidate/enable/disable the complete cache
+ *		       system which includes both L1 and L2 caches. The changes
+ *		       for these were done in:
+ *		       src/microblaze/xil_cache.c and src/microblaze/xil_cache.h
+ *		       files.
+ *		       Four new files were added for supporting L2 cache. They are:
+ *		       microblaze_flush_cache_ext.S-> Flushes L2 cache
+ *		       microblaze_flush_cache_ext_range.S -> Flushes a range of
+ *		       memory in L2 cache.
+ *		       microblaze_invalidate_cache_ext.S-> Invalidates L2 cache
+ *		       microblaze_invalidate_cache_ext_range -> Invalidates a
+ *		       range of memory in L2 cache.
+ *		       These changes are done to implement PR #697214.
+ * 3.10a  asa 05/13/13 Modified cache disable APIs at src/cortexa9/xil_cache.c to
+ *		       fix the CR #706464. L2 cache disabling happens independent
+ *		       of L1 data cache disable operation. Changes are done in the
+ *		       same file in cache handling APIs to do a L2 cache sync
+ *		       (poll reg7_?cache_?sync). This fixes CR #700542.
+ * 3.10a asa  05/20/13 Added API/Macros for enabling and disabling nested
+ *		       interrupts for ARM. These are done to fix the CR#699680.
+ * 3.10a srt  05/20/13 Made changes in cache maintenance APIs to do a proper cach
+ *		       sync operation. This fixes the CR# 716781.
+ * 3.11a asa  09/07/13 Updated armcc specific BSP files to have proper support
+ *		       for armcc toolchain.
+ *		       Modified asm_vectors.S (gcc) and asm_vectors.s (armcc) to
+ *		       fix issues related to NEON context saving. The assembly
+ *		       routines for IRQ and FIQ handling are modified.
+ *		       Deprecated the older BSP (3.10a).
+ * 3.11a asa  09/22/13 Fix for CR#732704. Cache APIs are modified to avoid
+ *		       various potential issues. Made changes in the function
+ *		       Xil_SetAttributes in file xil_mmu.c.
+ * 3.11a asa  09/23/13 Added files xil_misc_psreset_api.c and xil_misc_psreset_api.h
+ *		       in src\cortexa9 and src\microblaze folders.
+ * 3.11a asa  09/28/13 Modified the cache APIs (src\cortexa9) to fix handling of
+ *		       L2 cache sync operation and to fix issues around complete
+ *		       L2 cache flush/invalidation by ways.
+ * 3.12a asa  10/22/13 Modified the files xpseudo_asm_rvct.c and xpseudo_asm_rvct.h
+ *		       to fix linking issues with armcc/DS-5. Modified the armcc
+ *		       makefile to fix issues.
+ * 3.12a asa  11/15/13 Fix for CR#754800. It fixes issues around profiling for MB.
+ * 4.0   hk   12/13/13 Added check for STDOUT_BASEADDRESS where outbyte is used.
+ * 4.0 	 pkp  22/01/14 Modified return addresses for interrupt handlers (DataAbortHandler
+ *		       and SWIHandler) in asm_vector.S (src\cortexa9\gcc\ and
+ *		       src\cortexa9\armcc\) to fix CR#767251
+ * 4.0	 pkp  24/01/14 Modified cache APIs (Xil_DCacheInvalidateRange and
+ *		       Xil_L1DCacheInvalidate) in xil_cache.c (src\cortexa9) to fix the bugs.
+ *		       Few cache lines were missed to invalidate when unaligned address
+ *		       invalidation was accommodated in Xil_DCacheInvalidateRange.
+ *		       In Xil_L1DCacheInvalidate, while invalidating all L1D cache
+ *		       stack memory (which contains return address) was invalidated. So
+ *		       stack memory is flushed first and then L1D cache is invalidated.
+ *		       This is done to fix CR #763829
+ * 4.0 adk   22/02/2014 Fixed the CR:775379 removed unnecessay _t(unit32_t etc) from
+ *			mblaze_nt_types.h file and replace uint32_t with u32 in the
+ *			profile_hist.c to fix the above CR.
+ * 4.1 bss   04/14/14  Updated driver tcl to remove _interrupt_handler.o from libgloss.a
+ * 		       instead of libxil.a and added prototypes for
+ *		       microblaze_invalidate_cache_ext and microblaze_flush_cache_ext in
+ *		       mb_interface.h
+ * 4.1 hk    04/18/14  Add sleep function.
+ * 4.1 asa   04/21/14  Fix for CR#764881. Added support for msrset and msrclr. Renamed
+ *		       some of the *.s files inMB BSP source to *.S.
+ * 4.1 asa   04/28/14  Fix for CR#772280. Made changes in file cortexa9/gcc/read.c.
+ * 4.1 bss   04/29/14  Modified driver tcl to use libxil.a if libgloss.a does not exist
+ *			CR#794205
+ * 4.1 asa   05/09/14  Fix for CR#798230. Made changes in cortexa9/xil_cache.c and
+ *		       common/xil_testcache.c
+ *	               Fix for CR#764881.
+ * 4.1 srt   06/27/14  Remove '#undef DEBUG' from src/common/xdebug.h, which allows to
+ *                     output the DEBUG logs when -DDEBUG flag is enabled in BSP.
+ * 4.2 pkp   06/27/14  Added support for IAR compiler in src/cortexa9/iccarm.
+ *		       Also added explanatory notes in cortexa9/xil_cache.c for CR#785243.
+ * 4.2 pkp   06/19/14  Asynchronous abort has been enabled into cortexa9/gcc/boot.s and
+ *		       cortexa9/armcc/boot.s. Added default exception handlers for data
+ *		       abort and prefetch abort using handlers called
+ *		       DataAbortHandler and PrefetchAbortHandler respectively in
+ *		       cortexa9/xil_exception.c to fix CR#802862.
+ * 4.2 pkp   06/30/14  MakeFile for cortexa9/armcc has been changed to fixes the
+ *		       issue of improper linking of translation_table.s
+ * 4.2 pkp   07/04/14  added weak attribute for the function in BSP which are also present
+ *		       in tool chain to avoid conflicts into some special cases
+ * 4.2 pkp   07/21/14  Corrected reset value of event counter in function
+ *		       Xpm_ResetEventCounters in src/cortexa9/xpm_counter.c to fix CR#796275
+ * 4.2 pkp   07/21/14  Included xil_types.h file in xil_mmu.h which had contained a function
+ * 		       containing type def u32 defined in xil_types.g to resolve issue of
+ *		       CR#805869
+ * 4.2 pkp   08/04/14  Removed unimplemented nanosleep routine from cortexa9/usleep.c as
+ *		       it is not possible to generate timer in nanosecond due to limited
+ *		       cpu frequency
+ * 4.2 pkp   08/04/14  Removed PEEP board related code which contained initialization of
+ *		       uart, smc nor and sram from cortexa9/gcc/xil-crt0.s and armcc/boot.s
+ *		       and iccarm/boot.s. Also uart.c and smc.c have been removed. Also
+ *		       removed function definition of XSmc_NorInit and XSmc_NorInit from
+ *		       cortexa9/smc.h
+ * 4.2 bss   08/11/14  Added microblaze_flush_cache_ext_range and microblaze_invalidate_
+ *		       cache_ext_range declarations in mb_interface.h CR#783821.
+ *		       Modified profile_mcount_mb.S to fix CR#808412.
+ * 4.2 pkp   08/21/14  modified makefile of iccarm for proper linking of objectfiles in
+ *		       cortexa9/iccarm to fix CR#816701
+ * 4.2 pkp   09/02/14  modified translation table entries in cortexa9/gcc/translation_table.s,
+ *		       armcc/translation_table.s and iccarm/translation_table.s
+ *		       to properly defined reserved entries according to address map for
+ *		       fixing CR#820146
+ * 4.2 pkp   09/11/14  modified translation table entries in cortexa9/iccarm/translation_table.s
+ *		       and  cortexa9/armcc/translation_table.s to resolve compilation
+ *		       error for solving CR#822897
+ * 5.0 kvn   12/9/14   Support for Zync Ultrascale Mp.Also modified code for
+ *                     MISRA-C:2012 compliance.
+ * 5.0 pkp   12/15/14  Added APIs to get information about the platforms running the code by
+ *		       adding src/common/xplatform_info.*s
+ * 5.0 pkp   16/12/14  Modified boot code to enable scu after MMU is enabled and
+ *		       removed incorrect initialization of TLB lockdown register to fix
+ *		       CR#830580 in cortexa9/gcc/boot.S & cpu_init.S, armcc/boot.S
+ *		       and iccarm/boot.s
+ * 5.0 pkp   25/02/15  Modified floating point flag to vfpv3 from vfpv3_d16 in BSP MakeFile
+ *		       for iccarm and armcc compiler of cortexA9
+ * 5.1 pkp   05/13/15  Changed the initialization order in cortexa9/gcc/boot.S, iccarm/boot.s
+ *		       and armcc/boot.s so to first invalidate caches and TLB, enable MMU and
+ *		       caches, then enable SMP bit in ACTLR. L2Cache invalidation and enabling
+ *		       of L2Cache is done later.
+ * 5.1 pkp   12/05/15  Modified cortexa9/xil_cache.c to modify Xil_DCacheInvalidateRange and
+ *		       Xil_DCacheFlushRange to remove unnecessary dsb which is unnecessarily
+ *		       taking long time to fix CR#853097. L2CacheSync is added into
+ *		       Xil_L2CacheInvalidateRange API. Xil_L1DCacheInvalidate and
+ *		       Xil_L2CacheInvalidate APIs are modified to flush the complete stack
+ *		       instead of just System Stack
+ * 5.1 pkp   14/05/15  Modified cortexa9/gcc/Makefile to keep a correct check of a compiler
+ *		       to update ECC_FLAGS and also take the compiler and archiver as specified
+ *		       in settings instead of hardcoding it.
+ * 5.2 pkp   06/08/15  Modified cortexa9/gcc/translation_table.S to put a check for
+ *		       XPAR_PS7_DDR_0_S_AXI_BASEADDR to confirm if DDR is present or not and
+ *		       accordingly generate the	translation table
+ * 5.2 pkp   23/07/15  Modified cortexa9/gcc/Makefile to keep a correct check of a compiler
+ *		       to update ECC_FLAGS to fix a bug introduced during new version creation
+ *		       of BSP.
+ * 5.3 pkp   10/07/15  Modified cortexa9/xil_cache.c file to change cache API so that L2 Cache
+ *		       functionalities are avoided for the OpenAMP slave application(when
+ *		       USE_AMP flag is defined for BSP) as master CPU would be utilizing L2
+ *		       cache for its operation. Also file operations such as read, write,
+ *		       close, open are also avoided for OpenAMP support(when USE_AMP flag is
+ *		       defined for BSP) because XilOpenAMP library contains own file operation.
+ *		       The xil-crt0.S file is modified for not initializing global timer for
+ *		       OpenAMP application as it might be already in use by master CPU
+ * 5.3 pkp   10/09/15  Modified cortexa9/iccarm/xpseudo_asm_iccarm.h file to change function
+ *		       definition for dsb, isb and dmb to fix the compilation error when used
+ *     kvn   16/10/15  Encapsulated assembly code into macros for R5 xil_cache file.
+ * 5.4 pkp   09/11/15  Modified cortexr5/gcc/boot.S to disable ACTLR.DBWR bit to avoid potential
+ *		       R5 deadlock for errata 780125
+ * 5.4 pkp   09/11/15  Modified cortexa53/32bit/gcc/boot.S to enable I-Cache and D-Cache for a53
+ *		       32 bit BSP in the initialization
+ * 5.4 pkp   09/11/15  Modified cortexa9/xil_misc_psreset_api.c file to change the description
+ *		       for XOcm_Remap function
+ * 5.4 pkp   16/11/15  Modified microblaze/xil_misc_psreset_api.c file to change the description
+ *		       for XOcm_Remap function
+ *     kvn   21/11/15  Added volatile keyword for ADDR varibles in Xil_Out API
+ *     kvn   21/11/15  Changed ADDR variable type from u32 to UINTPTR. This is
+ *                     required for MISRA-C:2012 Compliance.
+ * 5.4 pkp   23/11/15  Added attribute definitions for Xil_SetTlbAttributes API of Cortex-A9
+ *		       in cortexa9/xil_mmu.h
+ * 5.4 pkp   23/11/15  Added default undefined exception handler for Cortex-A9
+ * 5.4 pkp   11/12/15  Modified common/xplatform_info.h to add #defines for silicon for
+ *		       checking the current executing platform
+ * 5.4 pkp   18/12/15  Modified cortexa53/32bit/gcc/xil-crt0.S and 64bit/gcc/xil-crt0.S
+ *		       to initialize global constructor for C++ applications
+ * 5.4 pkp   18/12/15  Modified cortexr5/gcc/xil-crt0.S to initialize global constructor for
+ *		       C++ applications
+ * 5.4 pkp   18/12/15  Modified cortexa53/32bit/gcc/translation_table.S and 64bit/gcc/
+ *		       translation_table.S to update the translation table according to proper
+ *		       address map
+ * 5.4 pkp   18/12/15  Modified cortexar5/mpu.c to initialize the MPU according to proper
+ *		       address map
+ * 5.4	pkp  05/01/16  Modified cortexa53/64bit/boot.S to set the reset vector register RVBAR
+ *		       equivalent to vector table base address
+ * 5.4 pkp   08/01/16  Modified cortexa9/gcc/Makefile to update the extra compiler flag
+ *		       as per the toolchain update
+ * 5.4 pkp   12/01/16  Changed common/xplatform_info.* to add platform information support
+ *		       for Cortex-A53 32bit mode
+ * 5.4 pkp   28/01/16  Modified cortexa53/32bit/sleep.c and usleep.c & cortexa53/64bit/sleep.c
+ *		       and usleep.c to correct routines to avoid hardcoding the timer frequency,
+ *		       instead take it from xparameters.h to properly configure the timestamp
+ *		       clock frequency
+ * 5.4 asa   29/01/16  Modified microblaze/mb_interface.h to add macros that support the
+ *		       new instructions for MB address extension feature
+ * 5.4 kvn   30/01/16  Modified xparameters_ps.h file to add interrupt ID number for
+ *		       system monitor.
+ * 5.4 pkp   04/02/16  Modified cortexr5/gcc/boot.S to enable fault log for lock-step mode
+ * 5.4 pkp   19/02/16  Modified cortexr5/xtime_l.c to add an API XTime_StartTimer and updated
+ *		       cortexr5/xil-crt0.S to configure the TTC3 timer when present. Modified
+ *		       cortexr5/sleep.c, cortexr5/usleep.c to use TTC3 when present otherwise
+ *		       use set of assembly instructions to provide required delay to fix
+ *		       CR#913249.
+ * 5.4 asa   25/02/16  Made changes in xil-crt0.S for R5, A53 64 and 32 bit BSPs, to replace
+ *		       _exit with exit. We should not be directly calling _exit and should
+ *		       always use the library exit. This fixes the CR#937036.
+ * 5.4 pkp   25/02/16  Made change to cortexr5/gcc/boot.S to initialize the floating point
+ *		       registers, banked registers for various modes and enabled
+ *		       the cache ECC check before enabling the fault log for lock step mode
+ *		       Also modified the cortexr5/gcc/Makefile to support floating point
+ *		       registers initialization in boot code.
+ * 5.4 pkp   03/01/16  Updated the exit function in cortexr5/gcc/_exit.c to enable the debug
+ *		       logic in case of lock-step mode when fault log is enabled to fix
+ *		       CR#938281
+ * 5.4 pkp   03/02/16  Modified cortexa9/iccarm/xpseudo_asm_iccarm.h file to include
+ *		       header file instrinsics.h which contains assembly instructions
+ *		       definitions which can be used by C
+ * 5.4 asa   03/02/16  Added print.c in MB BSP. Made other cosmetic changes to have uniform
+ *                     proto for all print.c across the BSPs. This patch fixes CR#938738.
+ * 5.4 pkp   03/09/16  Modified cortexr5/sleep.c and usleep.c to avoid disabling the
+ *		       interrupts when sleep/usleep is being executed using assembly
+ *		       instructions to fix CR#913249.
+ * 5.4 pkp   03/11/16  Modified cortexr5/xtime_l.c to avoid enabling overflow interrupt,
+ *		       instead modified cortexr5/sleep.c and usleep.c to poll the counter
+ *		       value and compare it with previous value to detect the overflow
+ *		       to fix CR#940209.
+ * 5.4 pkp   03/24/16  Modified cortexr5/boot.S to reset the dbg_lpd_reset before enabling
+ *		       the fault log to avoid intervention for lock-step mode and cortexr5/
+ *		       _exit.c to enable the dbg_lpd_reset once the fault log is disabled
+ *		       to fix CR#947335
+ *****************************************************************************************/
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/close.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/close.c
new file mode 100644
index 000000000..e42a1ff36
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/close.c
@@ -0,0 +1,47 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+#include "xil_types.h"
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 _close(s32 fd);
+}
+#endif
+
+/*
+ * close -- We don't need to do anything, but pretend we did.
+ */
+
+__attribute__((weak)) s32 _close(s32 fd)
+{
+  (void)fd;
+  return (0);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/config.make b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/config.make
new file mode 100644
index 000000000..2b7dbb6f7
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/config.make
@@ -0,0 +1,2 @@
+LIBSOURCES = *.c *.S
+LIBS = standalone_libs
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/cpu_init.S b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/cpu_init.S
new file mode 100644
index 000000000..40bbc2c7a
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/cpu_init.S
@@ -0,0 +1,79 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file cpu_init.s
+*
+* This file contains CPU specific initialization. Invoked from main CRT
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------- -------- ---------------------------------------------------
+* 5.00  pkp	02/10/14 Initial version
+*
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+	.text
+	.global __cpu_init
+	.align 2
+__cpu_init:
+
+/* Clear cp15 regs with unknown reset values */
+	mov	r0, #0x0
+	mcr	p15, 0, r0, c5, c0, 0	/* DFSR */
+	mcr	p15, 0, r0, c5, c0, 1	/* IFSR */
+	mcr	p15, 0, r0, c6, c0, 0	/* DFAR */
+	mcr	p15, 0, r0, c6, c0, 2	/* IFAR */
+	mcr	p15, 0, r0, c9, c13, 2	/* PMXEVCNTR */
+	mcr	p15, 0, r0, c13, c0, 2	/* TPIDRURW */
+	mcr	p15, 0, r0, c13, c0, 3	/* TPIDRURO */
+
+
+/* Reset and start Cycle Counter */
+	mov	r2, #0x80000000		/* clear overflow */
+	mcr	p15, 0, r2, c9, c12, 3
+	mov	r2, #0xd		/* D, C, E */
+	mcr	p15, 0, r2, c9, c12, 0
+	mov	r2, #0x80000000		/* enable cycle counter */
+	mcr	p15, 0, r2, c9, c12, 1
+
+	bx	lr
+
+.end
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/errno.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/errno.c
new file mode 100644
index 000000000..daaa1212d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/errno.c
@@ -0,0 +1,51 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+/* The errno variable is stored in the reentrancy structure.  This
+   function returns its address for use by the macro errno defined in
+   errno.h.  */
+
+#include 
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) sint32 * __errno (void);
+}
+#endif
+
+__attribute__((weak)) sint32 *
+__errno (void)
+{
+  return &_REENT->_errno;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/fcntl.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/fcntl.c
new file mode 100644
index 000000000..4c5de40fd
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/fcntl.c
@@ -0,0 +1,46 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include "xil_types.h"
+
+/*
+ * fcntl -- Manipulate a file descriptor.
+ *          We don't have a filesystem, so we do nothing.
+ */
+__attribute__((weak)) s32 fcntl (s32 fd, s32 cmd, s32 arg)
+{
+  (void)fd;
+  (void)cmd;
+  (void)arg;
+  return 0;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/fstat.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/fstat.c
new file mode 100644
index 000000000..6271cfa84
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/fstat.c
@@ -0,0 +1,50 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 _fstat(s32 fd, struct stat *buf);
+}
+#endif
+/*
+ * fstat -- Since we have no file system, we just return an error.
+ */
+__attribute__((weak)) s32 _fstat(s32 fd, struct stat *buf)
+{
+  (void)fd;
+  buf->st_mode = S_IFCHR; /* Always pretend to be a tty */
+
+  return (0);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/getpid.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/getpid.c
new file mode 100644
index 000000000..c2a84cb7f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/getpid.c
@@ -0,0 +1,51 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include "xil_types.h"
+/*
+ * getpid -- only one process, so just return 1.
+ */
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 _getpid(void);
+}
+#endif
+
+__attribute__((weak)) s32 getpid(void)
+{
+  return 1;
+}
+
+__attribute__((weak)) s32 _getpid(void)
+{
+  return 1;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/inbyte.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/inbyte.c
new file mode 100644
index 000000000..a5a6448d4
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/inbyte.c
@@ -0,0 +1,14 @@
+#include "xparameters.h"
+#include "xuartps_hw.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+char inbyte(void);
+#ifdef __cplusplus
+}
+#endif 
+
+char inbyte(void) {
+	 return XUartPs_RecvByte(STDIN_BASEADDRESS);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu0_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu0_cfg.h
new file mode 100644
index 000000000..9029bead8
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu0_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XDDR_XMPU0_CFG_H__
+#define __XDDR_XMPU0_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XddrXmpu0Cfg Base Address
+ */
+#define XDDR_XMPU0_CFG_BASEADDR      0xFD000000UL
+
+/**
+ * Register: XddrXmpu0CfgCtrl
+ */
+#define XDDR_XMPU0_CFG_CTRL    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000000UL )
+#define XDDR_XMPU0_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XDDR_XMPU0_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XDDR_XMPU0_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XDDR_XMPU0_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XDDR_XMPU0_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XDDR_XMPU0_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XDDR_XMPU0_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu0CfgErrSts1
+ */
+#define XDDR_XMPU0_CFG_ERR_STS1    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000004UL )
+#define XDDR_XMPU0_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XDDR_XMPU0_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XDDR_XMPU0_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgErrSts2
+ */
+#define XDDR_XMPU0_CFG_ERR_STS2    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000008UL )
+#define XDDR_XMPU0_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgPoison
+ */
+#define XDDR_XMPU0_CFG_POISON    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000000CUL )
+#define XDDR_XMPU0_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XDDR_XMPU0_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XDDR_XMPU0_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XDDR_XMPU0_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_POISON_BASE_SHIFT   0UL
+#define XDDR_XMPU0_CFG_POISON_BASE_WIDTH   20UL
+#define XDDR_XMPU0_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XDDR_XMPU0_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgIsr
+ */
+#define XDDR_XMPU0_CFG_ISR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000010UL )
+#define XDDR_XMPU0_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU0_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU0_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU0_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_ISR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU0_CFG_ISR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU0_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgImr
+ */
+#define XDDR_XMPU0_CFG_IMR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000014UL )
+#define XDDR_XMPU0_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XDDR_XMPU0_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU0_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU0_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU0_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_IMR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU0_CFG_IMR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu0CfgIen
+ */
+#define XDDR_XMPU0_CFG_IEN    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000018UL )
+#define XDDR_XMPU0_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU0_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU0_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU0_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_IEN_INV_APB_SHIFT   0UL
+#define XDDR_XMPU0_CFG_IEN_INV_APB_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgIds
+ */
+#define XDDR_XMPU0_CFG_IDS    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000001CUL )
+#define XDDR_XMPU0_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU0_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU0_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU0_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_IDS_INV_APB_SHIFT   0UL
+#define XDDR_XMPU0_CFG_IDS_INV_APB_WIDTH   1UL
+#define XDDR_XMPU0_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgLock
+ */
+#define XDDR_XMPU0_CFG_LOCK    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000020UL )
+#define XDDR_XMPU0_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XDDR_XMPU0_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR00Strt
+ */
+#define XDDR_XMPU0_CFG_R00_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000100UL )
+#define XDDR_XMPU0_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR00End
+ */
+#define XDDR_XMPU0_CFG_R00_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000104UL )
+#define XDDR_XMPU0_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R00_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R00_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR00Mstr
+ */
+#define XDDR_XMPU0_CFG_R00_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000108UL )
+#define XDDR_XMPU0_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR00
+ */
+#define XDDR_XMPU0_CFG_R00    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000010CUL )
+#define XDDR_XMPU0_CFG_R00_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R00_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R00_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R00_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R00_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R00_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R00_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R00_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R00_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R00_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR01Strt
+ */
+#define XDDR_XMPU0_CFG_R01_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000110UL )
+#define XDDR_XMPU0_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR01End
+ */
+#define XDDR_XMPU0_CFG_R01_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000114UL )
+#define XDDR_XMPU0_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R01_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R01_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR01Mstr
+ */
+#define XDDR_XMPU0_CFG_R01_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000118UL )
+#define XDDR_XMPU0_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR01
+ */
+#define XDDR_XMPU0_CFG_R01    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000011CUL )
+#define XDDR_XMPU0_CFG_R01_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R01_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R01_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R01_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R01_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R01_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R01_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R01_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R01_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R01_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR02Strt
+ */
+#define XDDR_XMPU0_CFG_R02_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000120UL )
+#define XDDR_XMPU0_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR02End
+ */
+#define XDDR_XMPU0_CFG_R02_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000124UL )
+#define XDDR_XMPU0_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R02_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R02_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR02Mstr
+ */
+#define XDDR_XMPU0_CFG_R02_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000128UL )
+#define XDDR_XMPU0_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR02
+ */
+#define XDDR_XMPU0_CFG_R02    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000012CUL )
+#define XDDR_XMPU0_CFG_R02_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R02_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R02_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R02_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R02_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R02_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R02_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R02_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R02_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R02_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR03Strt
+ */
+#define XDDR_XMPU0_CFG_R03_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000130UL )
+#define XDDR_XMPU0_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR03End
+ */
+#define XDDR_XMPU0_CFG_R03_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000134UL )
+#define XDDR_XMPU0_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R03_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R03_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR03Mstr
+ */
+#define XDDR_XMPU0_CFG_R03_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000138UL )
+#define XDDR_XMPU0_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR03
+ */
+#define XDDR_XMPU0_CFG_R03    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000013CUL )
+#define XDDR_XMPU0_CFG_R03_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R03_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R03_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R03_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R03_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R03_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R03_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R03_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R03_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R03_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR04Strt
+ */
+#define XDDR_XMPU0_CFG_R04_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000140UL )
+#define XDDR_XMPU0_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR04End
+ */
+#define XDDR_XMPU0_CFG_R04_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000144UL )
+#define XDDR_XMPU0_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R04_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R04_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR04Mstr
+ */
+#define XDDR_XMPU0_CFG_R04_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000148UL )
+#define XDDR_XMPU0_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR04
+ */
+#define XDDR_XMPU0_CFG_R04    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000014CUL )
+#define XDDR_XMPU0_CFG_R04_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R04_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R04_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R04_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R04_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R04_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R04_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R04_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R04_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R04_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR05Strt
+ */
+#define XDDR_XMPU0_CFG_R05_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000150UL )
+#define XDDR_XMPU0_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR05End
+ */
+#define XDDR_XMPU0_CFG_R05_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000154UL )
+#define XDDR_XMPU0_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R05_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R05_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR05Mstr
+ */
+#define XDDR_XMPU0_CFG_R05_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000158UL )
+#define XDDR_XMPU0_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR05
+ */
+#define XDDR_XMPU0_CFG_R05    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000015CUL )
+#define XDDR_XMPU0_CFG_R05_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R05_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R05_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R05_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R05_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R05_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R05_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R05_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R05_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R05_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR06Strt
+ */
+#define XDDR_XMPU0_CFG_R06_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000160UL )
+#define XDDR_XMPU0_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR06End
+ */
+#define XDDR_XMPU0_CFG_R06_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000164UL )
+#define XDDR_XMPU0_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R06_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R06_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR06Mstr
+ */
+#define XDDR_XMPU0_CFG_R06_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000168UL )
+#define XDDR_XMPU0_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR06
+ */
+#define XDDR_XMPU0_CFG_R06    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000016CUL )
+#define XDDR_XMPU0_CFG_R06_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R06_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R06_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R06_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R06_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R06_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R06_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R06_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R06_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R06_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR07Strt
+ */
+#define XDDR_XMPU0_CFG_R07_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000170UL )
+#define XDDR_XMPU0_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR07End
+ */
+#define XDDR_XMPU0_CFG_R07_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000174UL )
+#define XDDR_XMPU0_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R07_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R07_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR07Mstr
+ */
+#define XDDR_XMPU0_CFG_R07_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000178UL )
+#define XDDR_XMPU0_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR07
+ */
+#define XDDR_XMPU0_CFG_R07    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000017CUL )
+#define XDDR_XMPU0_CFG_R07_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R07_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R07_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R07_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R07_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R07_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R07_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R07_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R07_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R07_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR08Strt
+ */
+#define XDDR_XMPU0_CFG_R08_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000180UL )
+#define XDDR_XMPU0_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR08End
+ */
+#define XDDR_XMPU0_CFG_R08_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000184UL )
+#define XDDR_XMPU0_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R08_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R08_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR08Mstr
+ */
+#define XDDR_XMPU0_CFG_R08_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000188UL )
+#define XDDR_XMPU0_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR08
+ */
+#define XDDR_XMPU0_CFG_R08    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000018CUL )
+#define XDDR_XMPU0_CFG_R08_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R08_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R08_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R08_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R08_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R08_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R08_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R08_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R08_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R08_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR09Strt
+ */
+#define XDDR_XMPU0_CFG_R09_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000190UL )
+#define XDDR_XMPU0_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR09End
+ */
+#define XDDR_XMPU0_CFG_R09_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000194UL )
+#define XDDR_XMPU0_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R09_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R09_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR09Mstr
+ */
+#define XDDR_XMPU0_CFG_R09_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x00000198UL )
+#define XDDR_XMPU0_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR09
+ */
+#define XDDR_XMPU0_CFG_R09    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x0000019CUL )
+#define XDDR_XMPU0_CFG_R09_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R09_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R09_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R09_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R09_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R09_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R09_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R09_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R09_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R09_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR10Strt
+ */
+#define XDDR_XMPU0_CFG_R10_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001A0UL )
+#define XDDR_XMPU0_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR10End
+ */
+#define XDDR_XMPU0_CFG_R10_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001A4UL )
+#define XDDR_XMPU0_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R10_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R10_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR10Mstr
+ */
+#define XDDR_XMPU0_CFG_R10_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001A8UL )
+#define XDDR_XMPU0_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR10
+ */
+#define XDDR_XMPU0_CFG_R10    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001ACUL )
+#define XDDR_XMPU0_CFG_R10_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R10_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R10_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R10_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R10_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R10_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R10_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R10_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R10_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R10_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR11Strt
+ */
+#define XDDR_XMPU0_CFG_R11_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001B0UL )
+#define XDDR_XMPU0_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR11End
+ */
+#define XDDR_XMPU0_CFG_R11_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001B4UL )
+#define XDDR_XMPU0_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R11_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R11_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR11Mstr
+ */
+#define XDDR_XMPU0_CFG_R11_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001B8UL )
+#define XDDR_XMPU0_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR11
+ */
+#define XDDR_XMPU0_CFG_R11    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001BCUL )
+#define XDDR_XMPU0_CFG_R11_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R11_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R11_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R11_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R11_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R11_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R11_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R11_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R11_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R11_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR12Strt
+ */
+#define XDDR_XMPU0_CFG_R12_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001C0UL )
+#define XDDR_XMPU0_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR12End
+ */
+#define XDDR_XMPU0_CFG_R12_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001C4UL )
+#define XDDR_XMPU0_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R12_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R12_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR12Mstr
+ */
+#define XDDR_XMPU0_CFG_R12_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001C8UL )
+#define XDDR_XMPU0_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR12
+ */
+#define XDDR_XMPU0_CFG_R12    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001CCUL )
+#define XDDR_XMPU0_CFG_R12_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R12_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R12_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R12_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R12_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R12_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R12_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R12_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R12_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R12_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR13Strt
+ */
+#define XDDR_XMPU0_CFG_R13_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001D0UL )
+#define XDDR_XMPU0_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR13End
+ */
+#define XDDR_XMPU0_CFG_R13_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001D4UL )
+#define XDDR_XMPU0_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R13_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R13_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR13Mstr
+ */
+#define XDDR_XMPU0_CFG_R13_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001D8UL )
+#define XDDR_XMPU0_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR13
+ */
+#define XDDR_XMPU0_CFG_R13    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001DCUL )
+#define XDDR_XMPU0_CFG_R13_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R13_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R13_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R13_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R13_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R13_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R13_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R13_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R13_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R13_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR14Strt
+ */
+#define XDDR_XMPU0_CFG_R14_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001E0UL )
+#define XDDR_XMPU0_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR14End
+ */
+#define XDDR_XMPU0_CFG_R14_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001E4UL )
+#define XDDR_XMPU0_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R14_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R14_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR14Mstr
+ */
+#define XDDR_XMPU0_CFG_R14_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001E8UL )
+#define XDDR_XMPU0_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR14
+ */
+#define XDDR_XMPU0_CFG_R14    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001ECUL )
+#define XDDR_XMPU0_CFG_R14_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R14_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R14_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R14_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R14_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R14_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R14_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R14_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R14_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R14_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR15Strt
+ */
+#define XDDR_XMPU0_CFG_R15_STRT    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001F0UL )
+#define XDDR_XMPU0_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR15End
+ */
+#define XDDR_XMPU0_CFG_R15_END    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001F4UL )
+#define XDDR_XMPU0_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R15_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R15_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU0_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU0_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR15Mstr
+ */
+#define XDDR_XMPU0_CFG_R15_MSTR    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001F8UL )
+#define XDDR_XMPU0_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU0_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU0_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU0_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU0_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU0_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu0CfgR15
+ */
+#define XDDR_XMPU0_CFG_R15    ( ( XDDR_XMPU0_CFG_BASEADDR ) + 0x000001FCUL )
+#define XDDR_XMPU0_CFG_R15_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU0_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU0_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU0_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R15_REGNNS_SHIFT   3UL
+#define XDDR_XMPU0_CFG_R15_REGNNS_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU0_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU0_CFG_R15_WRALWD_SHIFT   2UL
+#define XDDR_XMPU0_CFG_R15_WRALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU0_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R15_RDALWD_SHIFT   1UL
+#define XDDR_XMPU0_CFG_R15_RDALWD_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU0_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU0_CFG_R15_EN_SHIFT   0UL
+#define XDDR_XMPU0_CFG_R15_EN_WIDTH   1UL
+#define XDDR_XMPU0_CFG_R15_EN_MASK    0x00000001UL
+#define XDDR_XMPU0_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XDDR_XMPU0_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu1_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu1_cfg.h
new file mode 100644
index 000000000..e2fa6d4aa
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu1_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XDDR_XMPU1_CFG_H__
+#define __XDDR_XMPU1_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XddrXmpu1Cfg Base Address
+ */
+#define XDDR_XMPU1_CFG_BASEADDR      0xFD010000UL
+
+/**
+ * Register: XddrXmpu1CfgCtrl
+ */
+#define XDDR_XMPU1_CFG_CTRL    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000000UL )
+#define XDDR_XMPU1_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XDDR_XMPU1_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XDDR_XMPU1_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XDDR_XMPU1_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XDDR_XMPU1_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XDDR_XMPU1_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XDDR_XMPU1_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu1CfgErrSts1
+ */
+#define XDDR_XMPU1_CFG_ERR_STS1    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000004UL )
+#define XDDR_XMPU1_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XDDR_XMPU1_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XDDR_XMPU1_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgErrSts2
+ */
+#define XDDR_XMPU1_CFG_ERR_STS2    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000008UL )
+#define XDDR_XMPU1_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgPoison
+ */
+#define XDDR_XMPU1_CFG_POISON    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000000CUL )
+#define XDDR_XMPU1_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XDDR_XMPU1_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XDDR_XMPU1_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XDDR_XMPU1_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_POISON_BASE_SHIFT   0UL
+#define XDDR_XMPU1_CFG_POISON_BASE_WIDTH   20UL
+#define XDDR_XMPU1_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XDDR_XMPU1_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgIsr
+ */
+#define XDDR_XMPU1_CFG_ISR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000010UL )
+#define XDDR_XMPU1_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU1_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU1_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU1_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_ISR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU1_CFG_ISR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU1_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgImr
+ */
+#define XDDR_XMPU1_CFG_IMR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000014UL )
+#define XDDR_XMPU1_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XDDR_XMPU1_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU1_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU1_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU1_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_IMR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU1_CFG_IMR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu1CfgIen
+ */
+#define XDDR_XMPU1_CFG_IEN    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000018UL )
+#define XDDR_XMPU1_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU1_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU1_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU1_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_IEN_INV_APB_SHIFT   0UL
+#define XDDR_XMPU1_CFG_IEN_INV_APB_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgIds
+ */
+#define XDDR_XMPU1_CFG_IDS    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000001CUL )
+#define XDDR_XMPU1_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU1_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU1_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU1_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_IDS_INV_APB_SHIFT   0UL
+#define XDDR_XMPU1_CFG_IDS_INV_APB_WIDTH   1UL
+#define XDDR_XMPU1_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgLock
+ */
+#define XDDR_XMPU1_CFG_LOCK    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000020UL )
+#define XDDR_XMPU1_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XDDR_XMPU1_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR00Strt
+ */
+#define XDDR_XMPU1_CFG_R00_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000100UL )
+#define XDDR_XMPU1_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR00End
+ */
+#define XDDR_XMPU1_CFG_R00_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000104UL )
+#define XDDR_XMPU1_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R00_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R00_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR00Mstr
+ */
+#define XDDR_XMPU1_CFG_R00_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000108UL )
+#define XDDR_XMPU1_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR00
+ */
+#define XDDR_XMPU1_CFG_R00    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000010CUL )
+#define XDDR_XMPU1_CFG_R00_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R00_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R00_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R00_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R00_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R00_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R00_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R00_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R00_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R00_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR01Strt
+ */
+#define XDDR_XMPU1_CFG_R01_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000110UL )
+#define XDDR_XMPU1_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR01End
+ */
+#define XDDR_XMPU1_CFG_R01_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000114UL )
+#define XDDR_XMPU1_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R01_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R01_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR01Mstr
+ */
+#define XDDR_XMPU1_CFG_R01_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000118UL )
+#define XDDR_XMPU1_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR01
+ */
+#define XDDR_XMPU1_CFG_R01    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000011CUL )
+#define XDDR_XMPU1_CFG_R01_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R01_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R01_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R01_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R01_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R01_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R01_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R01_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R01_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R01_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR02Strt
+ */
+#define XDDR_XMPU1_CFG_R02_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000120UL )
+#define XDDR_XMPU1_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR02End
+ */
+#define XDDR_XMPU1_CFG_R02_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000124UL )
+#define XDDR_XMPU1_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R02_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R02_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR02Mstr
+ */
+#define XDDR_XMPU1_CFG_R02_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000128UL )
+#define XDDR_XMPU1_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR02
+ */
+#define XDDR_XMPU1_CFG_R02    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000012CUL )
+#define XDDR_XMPU1_CFG_R02_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R02_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R02_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R02_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R02_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R02_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R02_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R02_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R02_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R02_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR03Strt
+ */
+#define XDDR_XMPU1_CFG_R03_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000130UL )
+#define XDDR_XMPU1_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR03End
+ */
+#define XDDR_XMPU1_CFG_R03_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000134UL )
+#define XDDR_XMPU1_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R03_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R03_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR03Mstr
+ */
+#define XDDR_XMPU1_CFG_R03_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000138UL )
+#define XDDR_XMPU1_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR03
+ */
+#define XDDR_XMPU1_CFG_R03    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000013CUL )
+#define XDDR_XMPU1_CFG_R03_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R03_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R03_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R03_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R03_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R03_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R03_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R03_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R03_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R03_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR04Strt
+ */
+#define XDDR_XMPU1_CFG_R04_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000140UL )
+#define XDDR_XMPU1_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR04End
+ */
+#define XDDR_XMPU1_CFG_R04_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000144UL )
+#define XDDR_XMPU1_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R04_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R04_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR04Mstr
+ */
+#define XDDR_XMPU1_CFG_R04_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000148UL )
+#define XDDR_XMPU1_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR04
+ */
+#define XDDR_XMPU1_CFG_R04    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000014CUL )
+#define XDDR_XMPU1_CFG_R04_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R04_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R04_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R04_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R04_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R04_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R04_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R04_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R04_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R04_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR05Strt
+ */
+#define XDDR_XMPU1_CFG_R05_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000150UL )
+#define XDDR_XMPU1_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR05End
+ */
+#define XDDR_XMPU1_CFG_R05_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000154UL )
+#define XDDR_XMPU1_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R05_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R05_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR05Mstr
+ */
+#define XDDR_XMPU1_CFG_R05_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000158UL )
+#define XDDR_XMPU1_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR05
+ */
+#define XDDR_XMPU1_CFG_R05    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000015CUL )
+#define XDDR_XMPU1_CFG_R05_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R05_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R05_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R05_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R05_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R05_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R05_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R05_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R05_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R05_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR06Strt
+ */
+#define XDDR_XMPU1_CFG_R06_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000160UL )
+#define XDDR_XMPU1_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR06End
+ */
+#define XDDR_XMPU1_CFG_R06_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000164UL )
+#define XDDR_XMPU1_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R06_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R06_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR06Mstr
+ */
+#define XDDR_XMPU1_CFG_R06_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000168UL )
+#define XDDR_XMPU1_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR06
+ */
+#define XDDR_XMPU1_CFG_R06    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000016CUL )
+#define XDDR_XMPU1_CFG_R06_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R06_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R06_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R06_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R06_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R06_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R06_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R06_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R06_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R06_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR07Strt
+ */
+#define XDDR_XMPU1_CFG_R07_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000170UL )
+#define XDDR_XMPU1_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR07End
+ */
+#define XDDR_XMPU1_CFG_R07_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000174UL )
+#define XDDR_XMPU1_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R07_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R07_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR07Mstr
+ */
+#define XDDR_XMPU1_CFG_R07_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000178UL )
+#define XDDR_XMPU1_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR07
+ */
+#define XDDR_XMPU1_CFG_R07    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000017CUL )
+#define XDDR_XMPU1_CFG_R07_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R07_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R07_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R07_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R07_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R07_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R07_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R07_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R07_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R07_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR08Strt
+ */
+#define XDDR_XMPU1_CFG_R08_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000180UL )
+#define XDDR_XMPU1_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR08End
+ */
+#define XDDR_XMPU1_CFG_R08_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000184UL )
+#define XDDR_XMPU1_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R08_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R08_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR08Mstr
+ */
+#define XDDR_XMPU1_CFG_R08_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000188UL )
+#define XDDR_XMPU1_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR08
+ */
+#define XDDR_XMPU1_CFG_R08    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000018CUL )
+#define XDDR_XMPU1_CFG_R08_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R08_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R08_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R08_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R08_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R08_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R08_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R08_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R08_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R08_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR09Strt
+ */
+#define XDDR_XMPU1_CFG_R09_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000190UL )
+#define XDDR_XMPU1_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR09End
+ */
+#define XDDR_XMPU1_CFG_R09_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000194UL )
+#define XDDR_XMPU1_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R09_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R09_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR09Mstr
+ */
+#define XDDR_XMPU1_CFG_R09_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x00000198UL )
+#define XDDR_XMPU1_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR09
+ */
+#define XDDR_XMPU1_CFG_R09    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x0000019CUL )
+#define XDDR_XMPU1_CFG_R09_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R09_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R09_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R09_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R09_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R09_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R09_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R09_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R09_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R09_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR10Strt
+ */
+#define XDDR_XMPU1_CFG_R10_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001A0UL )
+#define XDDR_XMPU1_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR10End
+ */
+#define XDDR_XMPU1_CFG_R10_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001A4UL )
+#define XDDR_XMPU1_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R10_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R10_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR10Mstr
+ */
+#define XDDR_XMPU1_CFG_R10_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001A8UL )
+#define XDDR_XMPU1_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR10
+ */
+#define XDDR_XMPU1_CFG_R10    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001ACUL )
+#define XDDR_XMPU1_CFG_R10_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R10_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R10_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R10_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R10_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R10_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R10_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R10_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R10_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R10_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR11Strt
+ */
+#define XDDR_XMPU1_CFG_R11_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001B0UL )
+#define XDDR_XMPU1_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR11End
+ */
+#define XDDR_XMPU1_CFG_R11_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001B4UL )
+#define XDDR_XMPU1_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R11_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R11_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR11Mstr
+ */
+#define XDDR_XMPU1_CFG_R11_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001B8UL )
+#define XDDR_XMPU1_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR11
+ */
+#define XDDR_XMPU1_CFG_R11    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001BCUL )
+#define XDDR_XMPU1_CFG_R11_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R11_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R11_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R11_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R11_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R11_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R11_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R11_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R11_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R11_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR12Strt
+ */
+#define XDDR_XMPU1_CFG_R12_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001C0UL )
+#define XDDR_XMPU1_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR12End
+ */
+#define XDDR_XMPU1_CFG_R12_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001C4UL )
+#define XDDR_XMPU1_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R12_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R12_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR12Mstr
+ */
+#define XDDR_XMPU1_CFG_R12_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001C8UL )
+#define XDDR_XMPU1_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR12
+ */
+#define XDDR_XMPU1_CFG_R12    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001CCUL )
+#define XDDR_XMPU1_CFG_R12_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R12_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R12_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R12_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R12_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R12_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R12_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R12_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R12_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R12_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR13Strt
+ */
+#define XDDR_XMPU1_CFG_R13_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001D0UL )
+#define XDDR_XMPU1_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR13End
+ */
+#define XDDR_XMPU1_CFG_R13_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001D4UL )
+#define XDDR_XMPU1_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R13_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R13_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR13Mstr
+ */
+#define XDDR_XMPU1_CFG_R13_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001D8UL )
+#define XDDR_XMPU1_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR13
+ */
+#define XDDR_XMPU1_CFG_R13    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001DCUL )
+#define XDDR_XMPU1_CFG_R13_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R13_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R13_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R13_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R13_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R13_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R13_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R13_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R13_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R13_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR14Strt
+ */
+#define XDDR_XMPU1_CFG_R14_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001E0UL )
+#define XDDR_XMPU1_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR14End
+ */
+#define XDDR_XMPU1_CFG_R14_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001E4UL )
+#define XDDR_XMPU1_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R14_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R14_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR14Mstr
+ */
+#define XDDR_XMPU1_CFG_R14_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001E8UL )
+#define XDDR_XMPU1_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR14
+ */
+#define XDDR_XMPU1_CFG_R14    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001ECUL )
+#define XDDR_XMPU1_CFG_R14_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R14_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R14_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R14_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R14_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R14_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R14_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R14_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R14_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R14_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR15Strt
+ */
+#define XDDR_XMPU1_CFG_R15_STRT    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001F0UL )
+#define XDDR_XMPU1_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR15End
+ */
+#define XDDR_XMPU1_CFG_R15_END    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001F4UL )
+#define XDDR_XMPU1_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R15_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R15_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU1_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU1_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR15Mstr
+ */
+#define XDDR_XMPU1_CFG_R15_MSTR    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001F8UL )
+#define XDDR_XMPU1_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU1_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU1_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU1_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU1_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU1_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu1CfgR15
+ */
+#define XDDR_XMPU1_CFG_R15    ( ( XDDR_XMPU1_CFG_BASEADDR ) + 0x000001FCUL )
+#define XDDR_XMPU1_CFG_R15_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU1_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU1_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU1_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R15_REGNNS_SHIFT   3UL
+#define XDDR_XMPU1_CFG_R15_REGNNS_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU1_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU1_CFG_R15_WRALWD_SHIFT   2UL
+#define XDDR_XMPU1_CFG_R15_WRALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU1_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R15_RDALWD_SHIFT   1UL
+#define XDDR_XMPU1_CFG_R15_RDALWD_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU1_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU1_CFG_R15_EN_SHIFT   0UL
+#define XDDR_XMPU1_CFG_R15_EN_WIDTH   1UL
+#define XDDR_XMPU1_CFG_R15_EN_MASK    0x00000001UL
+#define XDDR_XMPU1_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XDDR_XMPU1_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu2_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu2_cfg.h
new file mode 100644
index 000000000..55ea2a7d3
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu2_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XDDR_XMPU2_CFG_H__
+#define __XDDR_XMPU2_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XddrXmpu2Cfg Base Address
+ */
+#define XDDR_XMPU2_CFG_BASEADDR      0xFD020000UL
+
+/**
+ * Register: XddrXmpu2CfgCtrl
+ */
+#define XDDR_XMPU2_CFG_CTRL    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000000UL )
+#define XDDR_XMPU2_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XDDR_XMPU2_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XDDR_XMPU2_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XDDR_XMPU2_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XDDR_XMPU2_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XDDR_XMPU2_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XDDR_XMPU2_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu2CfgErrSts1
+ */
+#define XDDR_XMPU2_CFG_ERR_STS1    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000004UL )
+#define XDDR_XMPU2_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XDDR_XMPU2_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XDDR_XMPU2_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgErrSts2
+ */
+#define XDDR_XMPU2_CFG_ERR_STS2    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000008UL )
+#define XDDR_XMPU2_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgPoison
+ */
+#define XDDR_XMPU2_CFG_POISON    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000000CUL )
+#define XDDR_XMPU2_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XDDR_XMPU2_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XDDR_XMPU2_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XDDR_XMPU2_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_POISON_BASE_SHIFT   0UL
+#define XDDR_XMPU2_CFG_POISON_BASE_WIDTH   20UL
+#define XDDR_XMPU2_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XDDR_XMPU2_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgIsr
+ */
+#define XDDR_XMPU2_CFG_ISR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000010UL )
+#define XDDR_XMPU2_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU2_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU2_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU2_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_ISR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU2_CFG_ISR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU2_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgImr
+ */
+#define XDDR_XMPU2_CFG_IMR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000014UL )
+#define XDDR_XMPU2_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XDDR_XMPU2_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU2_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU2_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU2_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_IMR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU2_CFG_IMR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu2CfgIen
+ */
+#define XDDR_XMPU2_CFG_IEN    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000018UL )
+#define XDDR_XMPU2_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU2_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU2_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU2_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_IEN_INV_APB_SHIFT   0UL
+#define XDDR_XMPU2_CFG_IEN_INV_APB_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgIds
+ */
+#define XDDR_XMPU2_CFG_IDS    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000001CUL )
+#define XDDR_XMPU2_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU2_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU2_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU2_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_IDS_INV_APB_SHIFT   0UL
+#define XDDR_XMPU2_CFG_IDS_INV_APB_WIDTH   1UL
+#define XDDR_XMPU2_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgLock
+ */
+#define XDDR_XMPU2_CFG_LOCK    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000020UL )
+#define XDDR_XMPU2_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XDDR_XMPU2_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR00Strt
+ */
+#define XDDR_XMPU2_CFG_R00_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000100UL )
+#define XDDR_XMPU2_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR00End
+ */
+#define XDDR_XMPU2_CFG_R00_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000104UL )
+#define XDDR_XMPU2_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R00_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R00_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR00Mstr
+ */
+#define XDDR_XMPU2_CFG_R00_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000108UL )
+#define XDDR_XMPU2_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR00
+ */
+#define XDDR_XMPU2_CFG_R00    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000010CUL )
+#define XDDR_XMPU2_CFG_R00_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R00_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R00_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R00_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R00_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R00_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R00_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R00_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R00_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R00_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR01Strt
+ */
+#define XDDR_XMPU2_CFG_R01_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000110UL )
+#define XDDR_XMPU2_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR01End
+ */
+#define XDDR_XMPU2_CFG_R01_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000114UL )
+#define XDDR_XMPU2_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R01_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R01_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR01Mstr
+ */
+#define XDDR_XMPU2_CFG_R01_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000118UL )
+#define XDDR_XMPU2_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR01
+ */
+#define XDDR_XMPU2_CFG_R01    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000011CUL )
+#define XDDR_XMPU2_CFG_R01_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R01_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R01_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R01_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R01_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R01_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R01_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R01_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R01_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R01_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR02Strt
+ */
+#define XDDR_XMPU2_CFG_R02_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000120UL )
+#define XDDR_XMPU2_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR02End
+ */
+#define XDDR_XMPU2_CFG_R02_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000124UL )
+#define XDDR_XMPU2_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R02_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R02_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR02Mstr
+ */
+#define XDDR_XMPU2_CFG_R02_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000128UL )
+#define XDDR_XMPU2_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR02
+ */
+#define XDDR_XMPU2_CFG_R02    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000012CUL )
+#define XDDR_XMPU2_CFG_R02_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R02_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R02_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R02_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R02_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R02_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R02_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R02_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R02_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R02_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR03Strt
+ */
+#define XDDR_XMPU2_CFG_R03_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000130UL )
+#define XDDR_XMPU2_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR03End
+ */
+#define XDDR_XMPU2_CFG_R03_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000134UL )
+#define XDDR_XMPU2_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R03_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R03_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR03Mstr
+ */
+#define XDDR_XMPU2_CFG_R03_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000138UL )
+#define XDDR_XMPU2_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR03
+ */
+#define XDDR_XMPU2_CFG_R03    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000013CUL )
+#define XDDR_XMPU2_CFG_R03_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R03_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R03_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R03_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R03_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R03_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R03_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R03_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R03_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R03_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR04Strt
+ */
+#define XDDR_XMPU2_CFG_R04_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000140UL )
+#define XDDR_XMPU2_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR04End
+ */
+#define XDDR_XMPU2_CFG_R04_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000144UL )
+#define XDDR_XMPU2_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R04_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R04_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR04Mstr
+ */
+#define XDDR_XMPU2_CFG_R04_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000148UL )
+#define XDDR_XMPU2_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR04
+ */
+#define XDDR_XMPU2_CFG_R04    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000014CUL )
+#define XDDR_XMPU2_CFG_R04_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R04_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R04_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R04_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R04_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R04_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R04_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R04_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R04_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R04_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR05Strt
+ */
+#define XDDR_XMPU2_CFG_R05_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000150UL )
+#define XDDR_XMPU2_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR05End
+ */
+#define XDDR_XMPU2_CFG_R05_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000154UL )
+#define XDDR_XMPU2_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R05_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R05_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR05Mstr
+ */
+#define XDDR_XMPU2_CFG_R05_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000158UL )
+#define XDDR_XMPU2_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR05
+ */
+#define XDDR_XMPU2_CFG_R05    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000015CUL )
+#define XDDR_XMPU2_CFG_R05_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R05_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R05_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R05_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R05_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R05_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R05_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R05_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R05_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R05_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR06Strt
+ */
+#define XDDR_XMPU2_CFG_R06_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000160UL )
+#define XDDR_XMPU2_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR06End
+ */
+#define XDDR_XMPU2_CFG_R06_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000164UL )
+#define XDDR_XMPU2_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R06_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R06_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR06Mstr
+ */
+#define XDDR_XMPU2_CFG_R06_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000168UL )
+#define XDDR_XMPU2_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR06
+ */
+#define XDDR_XMPU2_CFG_R06    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000016CUL )
+#define XDDR_XMPU2_CFG_R06_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R06_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R06_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R06_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R06_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R06_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R06_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R06_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R06_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R06_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR07Strt
+ */
+#define XDDR_XMPU2_CFG_R07_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000170UL )
+#define XDDR_XMPU2_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR07End
+ */
+#define XDDR_XMPU2_CFG_R07_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000174UL )
+#define XDDR_XMPU2_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R07_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R07_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR07Mstr
+ */
+#define XDDR_XMPU2_CFG_R07_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000178UL )
+#define XDDR_XMPU2_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR07
+ */
+#define XDDR_XMPU2_CFG_R07    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000017CUL )
+#define XDDR_XMPU2_CFG_R07_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R07_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R07_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R07_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R07_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R07_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R07_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R07_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R07_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R07_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR08Strt
+ */
+#define XDDR_XMPU2_CFG_R08_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000180UL )
+#define XDDR_XMPU2_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR08End
+ */
+#define XDDR_XMPU2_CFG_R08_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000184UL )
+#define XDDR_XMPU2_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R08_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R08_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR08Mstr
+ */
+#define XDDR_XMPU2_CFG_R08_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000188UL )
+#define XDDR_XMPU2_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR08
+ */
+#define XDDR_XMPU2_CFG_R08    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000018CUL )
+#define XDDR_XMPU2_CFG_R08_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R08_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R08_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R08_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R08_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R08_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R08_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R08_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R08_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R08_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR09Strt
+ */
+#define XDDR_XMPU2_CFG_R09_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000190UL )
+#define XDDR_XMPU2_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR09End
+ */
+#define XDDR_XMPU2_CFG_R09_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000194UL )
+#define XDDR_XMPU2_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R09_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R09_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR09Mstr
+ */
+#define XDDR_XMPU2_CFG_R09_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x00000198UL )
+#define XDDR_XMPU2_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR09
+ */
+#define XDDR_XMPU2_CFG_R09    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x0000019CUL )
+#define XDDR_XMPU2_CFG_R09_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R09_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R09_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R09_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R09_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R09_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R09_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R09_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R09_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R09_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR10Strt
+ */
+#define XDDR_XMPU2_CFG_R10_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001A0UL )
+#define XDDR_XMPU2_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR10End
+ */
+#define XDDR_XMPU2_CFG_R10_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001A4UL )
+#define XDDR_XMPU2_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R10_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R10_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR10Mstr
+ */
+#define XDDR_XMPU2_CFG_R10_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001A8UL )
+#define XDDR_XMPU2_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR10
+ */
+#define XDDR_XMPU2_CFG_R10    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001ACUL )
+#define XDDR_XMPU2_CFG_R10_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R10_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R10_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R10_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R10_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R10_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R10_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R10_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R10_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R10_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR11Strt
+ */
+#define XDDR_XMPU2_CFG_R11_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001B0UL )
+#define XDDR_XMPU2_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR11End
+ */
+#define XDDR_XMPU2_CFG_R11_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001B4UL )
+#define XDDR_XMPU2_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R11_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R11_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR11Mstr
+ */
+#define XDDR_XMPU2_CFG_R11_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001B8UL )
+#define XDDR_XMPU2_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR11
+ */
+#define XDDR_XMPU2_CFG_R11    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001BCUL )
+#define XDDR_XMPU2_CFG_R11_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R11_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R11_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R11_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R11_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R11_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R11_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R11_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R11_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R11_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR12Strt
+ */
+#define XDDR_XMPU2_CFG_R12_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001C0UL )
+#define XDDR_XMPU2_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR12End
+ */
+#define XDDR_XMPU2_CFG_R12_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001C4UL )
+#define XDDR_XMPU2_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R12_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R12_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR12Mstr
+ */
+#define XDDR_XMPU2_CFG_R12_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001C8UL )
+#define XDDR_XMPU2_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR12
+ */
+#define XDDR_XMPU2_CFG_R12    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001CCUL )
+#define XDDR_XMPU2_CFG_R12_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R12_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R12_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R12_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R12_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R12_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R12_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R12_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R12_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R12_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR13Strt
+ */
+#define XDDR_XMPU2_CFG_R13_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001D0UL )
+#define XDDR_XMPU2_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR13End
+ */
+#define XDDR_XMPU2_CFG_R13_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001D4UL )
+#define XDDR_XMPU2_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R13_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R13_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR13Mstr
+ */
+#define XDDR_XMPU2_CFG_R13_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001D8UL )
+#define XDDR_XMPU2_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR13
+ */
+#define XDDR_XMPU2_CFG_R13    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001DCUL )
+#define XDDR_XMPU2_CFG_R13_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R13_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R13_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R13_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R13_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R13_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R13_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R13_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R13_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R13_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR14Strt
+ */
+#define XDDR_XMPU2_CFG_R14_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001E0UL )
+#define XDDR_XMPU2_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR14End
+ */
+#define XDDR_XMPU2_CFG_R14_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001E4UL )
+#define XDDR_XMPU2_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R14_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R14_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR14Mstr
+ */
+#define XDDR_XMPU2_CFG_R14_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001E8UL )
+#define XDDR_XMPU2_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR14
+ */
+#define XDDR_XMPU2_CFG_R14    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001ECUL )
+#define XDDR_XMPU2_CFG_R14_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R14_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R14_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R14_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R14_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R14_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R14_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R14_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R14_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R14_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR15Strt
+ */
+#define XDDR_XMPU2_CFG_R15_STRT    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001F0UL )
+#define XDDR_XMPU2_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR15End
+ */
+#define XDDR_XMPU2_CFG_R15_END    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001F4UL )
+#define XDDR_XMPU2_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R15_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R15_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU2_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU2_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR15Mstr
+ */
+#define XDDR_XMPU2_CFG_R15_MSTR    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001F8UL )
+#define XDDR_XMPU2_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU2_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU2_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU2_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU2_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU2_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu2CfgR15
+ */
+#define XDDR_XMPU2_CFG_R15    ( ( XDDR_XMPU2_CFG_BASEADDR ) + 0x000001FCUL )
+#define XDDR_XMPU2_CFG_R15_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU2_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU2_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU2_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R15_REGNNS_SHIFT   3UL
+#define XDDR_XMPU2_CFG_R15_REGNNS_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU2_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU2_CFG_R15_WRALWD_SHIFT   2UL
+#define XDDR_XMPU2_CFG_R15_WRALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU2_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R15_RDALWD_SHIFT   1UL
+#define XDDR_XMPU2_CFG_R15_RDALWD_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU2_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU2_CFG_R15_EN_SHIFT   0UL
+#define XDDR_XMPU2_CFG_R15_EN_WIDTH   1UL
+#define XDDR_XMPU2_CFG_R15_EN_MASK    0x00000001UL
+#define XDDR_XMPU2_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XDDR_XMPU2_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu3_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu3_cfg.h
new file mode 100644
index 000000000..416314967
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu3_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XDDR_XMPU3_CFG_H__
+#define __XDDR_XMPU3_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XddrXmpu3Cfg Base Address
+ */
+#define XDDR_XMPU3_CFG_BASEADDR      0xFD030000UL
+
+/**
+ * Register: XddrXmpu3CfgCtrl
+ */
+#define XDDR_XMPU3_CFG_CTRL    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000000UL )
+#define XDDR_XMPU3_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XDDR_XMPU3_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XDDR_XMPU3_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XDDR_XMPU3_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XDDR_XMPU3_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XDDR_XMPU3_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XDDR_XMPU3_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu3CfgErrSts1
+ */
+#define XDDR_XMPU3_CFG_ERR_STS1    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000004UL )
+#define XDDR_XMPU3_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XDDR_XMPU3_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XDDR_XMPU3_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgErrSts2
+ */
+#define XDDR_XMPU3_CFG_ERR_STS2    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000008UL )
+#define XDDR_XMPU3_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgPoison
+ */
+#define XDDR_XMPU3_CFG_POISON    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000000CUL )
+#define XDDR_XMPU3_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XDDR_XMPU3_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XDDR_XMPU3_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XDDR_XMPU3_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_POISON_BASE_SHIFT   0UL
+#define XDDR_XMPU3_CFG_POISON_BASE_WIDTH   20UL
+#define XDDR_XMPU3_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XDDR_XMPU3_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgIsr
+ */
+#define XDDR_XMPU3_CFG_ISR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000010UL )
+#define XDDR_XMPU3_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU3_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU3_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU3_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_ISR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU3_CFG_ISR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU3_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgImr
+ */
+#define XDDR_XMPU3_CFG_IMR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000014UL )
+#define XDDR_XMPU3_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XDDR_XMPU3_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU3_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU3_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU3_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_IMR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU3_CFG_IMR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu3CfgIen
+ */
+#define XDDR_XMPU3_CFG_IEN    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000018UL )
+#define XDDR_XMPU3_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU3_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU3_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU3_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_IEN_INV_APB_SHIFT   0UL
+#define XDDR_XMPU3_CFG_IEN_INV_APB_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgIds
+ */
+#define XDDR_XMPU3_CFG_IDS    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000001CUL )
+#define XDDR_XMPU3_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU3_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU3_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU3_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_IDS_INV_APB_SHIFT   0UL
+#define XDDR_XMPU3_CFG_IDS_INV_APB_WIDTH   1UL
+#define XDDR_XMPU3_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgLock
+ */
+#define XDDR_XMPU3_CFG_LOCK    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000020UL )
+#define XDDR_XMPU3_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XDDR_XMPU3_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR00Strt
+ */
+#define XDDR_XMPU3_CFG_R00_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000100UL )
+#define XDDR_XMPU3_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR00End
+ */
+#define XDDR_XMPU3_CFG_R00_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000104UL )
+#define XDDR_XMPU3_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R00_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R00_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR00Mstr
+ */
+#define XDDR_XMPU3_CFG_R00_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000108UL )
+#define XDDR_XMPU3_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR00
+ */
+#define XDDR_XMPU3_CFG_R00    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000010CUL )
+#define XDDR_XMPU3_CFG_R00_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R00_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R00_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R00_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R00_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R00_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R00_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R00_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R00_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R00_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR01Strt
+ */
+#define XDDR_XMPU3_CFG_R01_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000110UL )
+#define XDDR_XMPU3_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR01End
+ */
+#define XDDR_XMPU3_CFG_R01_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000114UL )
+#define XDDR_XMPU3_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R01_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R01_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR01Mstr
+ */
+#define XDDR_XMPU3_CFG_R01_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000118UL )
+#define XDDR_XMPU3_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR01
+ */
+#define XDDR_XMPU3_CFG_R01    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000011CUL )
+#define XDDR_XMPU3_CFG_R01_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R01_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R01_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R01_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R01_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R01_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R01_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R01_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R01_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R01_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR02Strt
+ */
+#define XDDR_XMPU3_CFG_R02_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000120UL )
+#define XDDR_XMPU3_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR02End
+ */
+#define XDDR_XMPU3_CFG_R02_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000124UL )
+#define XDDR_XMPU3_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R02_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R02_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR02Mstr
+ */
+#define XDDR_XMPU3_CFG_R02_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000128UL )
+#define XDDR_XMPU3_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR02
+ */
+#define XDDR_XMPU3_CFG_R02    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000012CUL )
+#define XDDR_XMPU3_CFG_R02_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R02_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R02_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R02_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R02_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R02_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R02_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R02_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R02_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R02_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR03Strt
+ */
+#define XDDR_XMPU3_CFG_R03_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000130UL )
+#define XDDR_XMPU3_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR03End
+ */
+#define XDDR_XMPU3_CFG_R03_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000134UL )
+#define XDDR_XMPU3_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R03_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R03_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR03Mstr
+ */
+#define XDDR_XMPU3_CFG_R03_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000138UL )
+#define XDDR_XMPU3_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR03
+ */
+#define XDDR_XMPU3_CFG_R03    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000013CUL )
+#define XDDR_XMPU3_CFG_R03_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R03_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R03_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R03_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R03_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R03_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R03_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R03_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R03_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R03_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR04Strt
+ */
+#define XDDR_XMPU3_CFG_R04_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000140UL )
+#define XDDR_XMPU3_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR04End
+ */
+#define XDDR_XMPU3_CFG_R04_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000144UL )
+#define XDDR_XMPU3_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R04_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R04_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR04Mstr
+ */
+#define XDDR_XMPU3_CFG_R04_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000148UL )
+#define XDDR_XMPU3_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR04
+ */
+#define XDDR_XMPU3_CFG_R04    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000014CUL )
+#define XDDR_XMPU3_CFG_R04_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R04_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R04_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R04_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R04_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R04_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R04_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R04_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R04_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R04_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR05Strt
+ */
+#define XDDR_XMPU3_CFG_R05_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000150UL )
+#define XDDR_XMPU3_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR05End
+ */
+#define XDDR_XMPU3_CFG_R05_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000154UL )
+#define XDDR_XMPU3_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R05_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R05_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR05Mstr
+ */
+#define XDDR_XMPU3_CFG_R05_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000158UL )
+#define XDDR_XMPU3_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR05
+ */
+#define XDDR_XMPU3_CFG_R05    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000015CUL )
+#define XDDR_XMPU3_CFG_R05_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R05_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R05_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R05_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R05_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R05_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R05_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R05_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R05_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R05_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR06Strt
+ */
+#define XDDR_XMPU3_CFG_R06_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000160UL )
+#define XDDR_XMPU3_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR06End
+ */
+#define XDDR_XMPU3_CFG_R06_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000164UL )
+#define XDDR_XMPU3_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R06_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R06_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR06Mstr
+ */
+#define XDDR_XMPU3_CFG_R06_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000168UL )
+#define XDDR_XMPU3_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR06
+ */
+#define XDDR_XMPU3_CFG_R06    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000016CUL )
+#define XDDR_XMPU3_CFG_R06_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R06_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R06_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R06_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R06_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R06_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R06_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R06_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R06_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R06_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR07Strt
+ */
+#define XDDR_XMPU3_CFG_R07_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000170UL )
+#define XDDR_XMPU3_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR07End
+ */
+#define XDDR_XMPU3_CFG_R07_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000174UL )
+#define XDDR_XMPU3_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R07_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R07_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR07Mstr
+ */
+#define XDDR_XMPU3_CFG_R07_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000178UL )
+#define XDDR_XMPU3_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR07
+ */
+#define XDDR_XMPU3_CFG_R07    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000017CUL )
+#define XDDR_XMPU3_CFG_R07_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R07_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R07_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R07_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R07_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R07_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R07_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R07_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R07_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R07_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR08Strt
+ */
+#define XDDR_XMPU3_CFG_R08_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000180UL )
+#define XDDR_XMPU3_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR08End
+ */
+#define XDDR_XMPU3_CFG_R08_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000184UL )
+#define XDDR_XMPU3_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R08_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R08_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR08Mstr
+ */
+#define XDDR_XMPU3_CFG_R08_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000188UL )
+#define XDDR_XMPU3_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR08
+ */
+#define XDDR_XMPU3_CFG_R08    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000018CUL )
+#define XDDR_XMPU3_CFG_R08_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R08_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R08_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R08_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R08_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R08_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R08_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R08_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R08_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R08_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR09Strt
+ */
+#define XDDR_XMPU3_CFG_R09_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000190UL )
+#define XDDR_XMPU3_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR09End
+ */
+#define XDDR_XMPU3_CFG_R09_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000194UL )
+#define XDDR_XMPU3_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R09_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R09_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR09Mstr
+ */
+#define XDDR_XMPU3_CFG_R09_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x00000198UL )
+#define XDDR_XMPU3_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR09
+ */
+#define XDDR_XMPU3_CFG_R09    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x0000019CUL )
+#define XDDR_XMPU3_CFG_R09_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R09_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R09_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R09_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R09_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R09_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R09_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R09_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R09_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R09_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR10Strt
+ */
+#define XDDR_XMPU3_CFG_R10_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001A0UL )
+#define XDDR_XMPU3_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR10End
+ */
+#define XDDR_XMPU3_CFG_R10_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001A4UL )
+#define XDDR_XMPU3_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R10_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R10_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR10Mstr
+ */
+#define XDDR_XMPU3_CFG_R10_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001A8UL )
+#define XDDR_XMPU3_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR10
+ */
+#define XDDR_XMPU3_CFG_R10    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001ACUL )
+#define XDDR_XMPU3_CFG_R10_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R10_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R10_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R10_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R10_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R10_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R10_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R10_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R10_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R10_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR11Strt
+ */
+#define XDDR_XMPU3_CFG_R11_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001B0UL )
+#define XDDR_XMPU3_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR11End
+ */
+#define XDDR_XMPU3_CFG_R11_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001B4UL )
+#define XDDR_XMPU3_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R11_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R11_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR11Mstr
+ */
+#define XDDR_XMPU3_CFG_R11_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001B8UL )
+#define XDDR_XMPU3_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR11
+ */
+#define XDDR_XMPU3_CFG_R11    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001BCUL )
+#define XDDR_XMPU3_CFG_R11_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R11_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R11_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R11_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R11_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R11_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R11_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R11_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R11_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R11_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR12Strt
+ */
+#define XDDR_XMPU3_CFG_R12_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001C0UL )
+#define XDDR_XMPU3_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR12End
+ */
+#define XDDR_XMPU3_CFG_R12_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001C4UL )
+#define XDDR_XMPU3_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R12_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R12_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR12Mstr
+ */
+#define XDDR_XMPU3_CFG_R12_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001C8UL )
+#define XDDR_XMPU3_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR12
+ */
+#define XDDR_XMPU3_CFG_R12    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001CCUL )
+#define XDDR_XMPU3_CFG_R12_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R12_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R12_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R12_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R12_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R12_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R12_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R12_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R12_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R12_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR13Strt
+ */
+#define XDDR_XMPU3_CFG_R13_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001D0UL )
+#define XDDR_XMPU3_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR13End
+ */
+#define XDDR_XMPU3_CFG_R13_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001D4UL )
+#define XDDR_XMPU3_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R13_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R13_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR13Mstr
+ */
+#define XDDR_XMPU3_CFG_R13_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001D8UL )
+#define XDDR_XMPU3_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR13
+ */
+#define XDDR_XMPU3_CFG_R13    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001DCUL )
+#define XDDR_XMPU3_CFG_R13_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R13_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R13_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R13_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R13_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R13_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R13_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R13_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R13_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R13_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR14Strt
+ */
+#define XDDR_XMPU3_CFG_R14_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001E0UL )
+#define XDDR_XMPU3_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR14End
+ */
+#define XDDR_XMPU3_CFG_R14_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001E4UL )
+#define XDDR_XMPU3_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R14_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R14_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR14Mstr
+ */
+#define XDDR_XMPU3_CFG_R14_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001E8UL )
+#define XDDR_XMPU3_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR14
+ */
+#define XDDR_XMPU3_CFG_R14    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001ECUL )
+#define XDDR_XMPU3_CFG_R14_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R14_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R14_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R14_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R14_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R14_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R14_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R14_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R14_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R14_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR15Strt
+ */
+#define XDDR_XMPU3_CFG_R15_STRT    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001F0UL )
+#define XDDR_XMPU3_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR15End
+ */
+#define XDDR_XMPU3_CFG_R15_END    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001F4UL )
+#define XDDR_XMPU3_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R15_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R15_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU3_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU3_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR15Mstr
+ */
+#define XDDR_XMPU3_CFG_R15_MSTR    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001F8UL )
+#define XDDR_XMPU3_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU3_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU3_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU3_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU3_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU3_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu3CfgR15
+ */
+#define XDDR_XMPU3_CFG_R15    ( ( XDDR_XMPU3_CFG_BASEADDR ) + 0x000001FCUL )
+#define XDDR_XMPU3_CFG_R15_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU3_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU3_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU3_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R15_REGNNS_SHIFT   3UL
+#define XDDR_XMPU3_CFG_R15_REGNNS_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU3_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU3_CFG_R15_WRALWD_SHIFT   2UL
+#define XDDR_XMPU3_CFG_R15_WRALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU3_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R15_RDALWD_SHIFT   1UL
+#define XDDR_XMPU3_CFG_R15_RDALWD_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU3_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU3_CFG_R15_EN_SHIFT   0UL
+#define XDDR_XMPU3_CFG_R15_EN_WIDTH   1UL
+#define XDDR_XMPU3_CFG_R15_EN_MASK    0x00000001UL
+#define XDDR_XMPU3_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XDDR_XMPU3_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu4_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu4_cfg.h
new file mode 100644
index 000000000..2df814419
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu4_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XDDR_XMPU4_CFG_H__
+#define __XDDR_XMPU4_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XddrXmpu4Cfg Base Address
+ */
+#define XDDR_XMPU4_CFG_BASEADDR      0xFD040000UL
+
+/**
+ * Register: XddrXmpu4CfgCtrl
+ */
+#define XDDR_XMPU4_CFG_CTRL    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000000UL )
+#define XDDR_XMPU4_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XDDR_XMPU4_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XDDR_XMPU4_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XDDR_XMPU4_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XDDR_XMPU4_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XDDR_XMPU4_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XDDR_XMPU4_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu4CfgErrSts1
+ */
+#define XDDR_XMPU4_CFG_ERR_STS1    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000004UL )
+#define XDDR_XMPU4_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XDDR_XMPU4_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XDDR_XMPU4_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgErrSts2
+ */
+#define XDDR_XMPU4_CFG_ERR_STS2    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000008UL )
+#define XDDR_XMPU4_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgPoison
+ */
+#define XDDR_XMPU4_CFG_POISON    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000000CUL )
+#define XDDR_XMPU4_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XDDR_XMPU4_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XDDR_XMPU4_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XDDR_XMPU4_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_POISON_BASE_SHIFT   0UL
+#define XDDR_XMPU4_CFG_POISON_BASE_WIDTH   20UL
+#define XDDR_XMPU4_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XDDR_XMPU4_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgIsr
+ */
+#define XDDR_XMPU4_CFG_ISR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000010UL )
+#define XDDR_XMPU4_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU4_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU4_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU4_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_ISR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU4_CFG_ISR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU4_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgImr
+ */
+#define XDDR_XMPU4_CFG_IMR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000014UL )
+#define XDDR_XMPU4_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XDDR_XMPU4_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU4_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU4_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU4_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_IMR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU4_CFG_IMR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu4CfgIen
+ */
+#define XDDR_XMPU4_CFG_IEN    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000018UL )
+#define XDDR_XMPU4_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU4_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU4_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU4_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_IEN_INV_APB_SHIFT   0UL
+#define XDDR_XMPU4_CFG_IEN_INV_APB_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgIds
+ */
+#define XDDR_XMPU4_CFG_IDS    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000001CUL )
+#define XDDR_XMPU4_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU4_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU4_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU4_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_IDS_INV_APB_SHIFT   0UL
+#define XDDR_XMPU4_CFG_IDS_INV_APB_WIDTH   1UL
+#define XDDR_XMPU4_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgLock
+ */
+#define XDDR_XMPU4_CFG_LOCK    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000020UL )
+#define XDDR_XMPU4_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XDDR_XMPU4_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR00Strt
+ */
+#define XDDR_XMPU4_CFG_R00_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000100UL )
+#define XDDR_XMPU4_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR00End
+ */
+#define XDDR_XMPU4_CFG_R00_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000104UL )
+#define XDDR_XMPU4_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R00_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R00_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR00Mstr
+ */
+#define XDDR_XMPU4_CFG_R00_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000108UL )
+#define XDDR_XMPU4_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR00
+ */
+#define XDDR_XMPU4_CFG_R00    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000010CUL )
+#define XDDR_XMPU4_CFG_R00_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R00_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R00_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R00_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R00_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R00_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R00_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R00_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R00_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R00_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR01Strt
+ */
+#define XDDR_XMPU4_CFG_R01_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000110UL )
+#define XDDR_XMPU4_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR01End
+ */
+#define XDDR_XMPU4_CFG_R01_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000114UL )
+#define XDDR_XMPU4_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R01_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R01_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR01Mstr
+ */
+#define XDDR_XMPU4_CFG_R01_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000118UL )
+#define XDDR_XMPU4_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR01
+ */
+#define XDDR_XMPU4_CFG_R01    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000011CUL )
+#define XDDR_XMPU4_CFG_R01_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R01_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R01_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R01_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R01_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R01_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R01_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R01_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R01_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R01_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR02Strt
+ */
+#define XDDR_XMPU4_CFG_R02_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000120UL )
+#define XDDR_XMPU4_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR02End
+ */
+#define XDDR_XMPU4_CFG_R02_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000124UL )
+#define XDDR_XMPU4_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R02_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R02_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR02Mstr
+ */
+#define XDDR_XMPU4_CFG_R02_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000128UL )
+#define XDDR_XMPU4_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR02
+ */
+#define XDDR_XMPU4_CFG_R02    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000012CUL )
+#define XDDR_XMPU4_CFG_R02_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R02_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R02_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R02_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R02_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R02_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R02_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R02_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R02_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R02_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR03Strt
+ */
+#define XDDR_XMPU4_CFG_R03_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000130UL )
+#define XDDR_XMPU4_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR03End
+ */
+#define XDDR_XMPU4_CFG_R03_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000134UL )
+#define XDDR_XMPU4_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R03_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R03_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR03Mstr
+ */
+#define XDDR_XMPU4_CFG_R03_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000138UL )
+#define XDDR_XMPU4_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR03
+ */
+#define XDDR_XMPU4_CFG_R03    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000013CUL )
+#define XDDR_XMPU4_CFG_R03_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R03_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R03_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R03_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R03_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R03_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R03_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R03_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R03_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R03_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR04Strt
+ */
+#define XDDR_XMPU4_CFG_R04_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000140UL )
+#define XDDR_XMPU4_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR04End
+ */
+#define XDDR_XMPU4_CFG_R04_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000144UL )
+#define XDDR_XMPU4_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R04_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R04_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR04Mstr
+ */
+#define XDDR_XMPU4_CFG_R04_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000148UL )
+#define XDDR_XMPU4_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR04
+ */
+#define XDDR_XMPU4_CFG_R04    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000014CUL )
+#define XDDR_XMPU4_CFG_R04_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R04_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R04_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R04_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R04_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R04_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R04_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R04_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R04_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R04_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR05Strt
+ */
+#define XDDR_XMPU4_CFG_R05_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000150UL )
+#define XDDR_XMPU4_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR05End
+ */
+#define XDDR_XMPU4_CFG_R05_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000154UL )
+#define XDDR_XMPU4_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R05_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R05_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR05Mstr
+ */
+#define XDDR_XMPU4_CFG_R05_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000158UL )
+#define XDDR_XMPU4_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR05
+ */
+#define XDDR_XMPU4_CFG_R05    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000015CUL )
+#define XDDR_XMPU4_CFG_R05_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R05_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R05_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R05_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R05_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R05_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R05_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R05_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R05_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R05_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR06Strt
+ */
+#define XDDR_XMPU4_CFG_R06_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000160UL )
+#define XDDR_XMPU4_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR06End
+ */
+#define XDDR_XMPU4_CFG_R06_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000164UL )
+#define XDDR_XMPU4_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R06_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R06_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR06Mstr
+ */
+#define XDDR_XMPU4_CFG_R06_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000168UL )
+#define XDDR_XMPU4_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR06
+ */
+#define XDDR_XMPU4_CFG_R06    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000016CUL )
+#define XDDR_XMPU4_CFG_R06_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R06_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R06_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R06_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R06_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R06_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R06_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R06_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R06_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R06_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR07Strt
+ */
+#define XDDR_XMPU4_CFG_R07_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000170UL )
+#define XDDR_XMPU4_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR07End
+ */
+#define XDDR_XMPU4_CFG_R07_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000174UL )
+#define XDDR_XMPU4_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R07_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R07_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR07Mstr
+ */
+#define XDDR_XMPU4_CFG_R07_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000178UL )
+#define XDDR_XMPU4_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR07
+ */
+#define XDDR_XMPU4_CFG_R07    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000017CUL )
+#define XDDR_XMPU4_CFG_R07_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R07_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R07_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R07_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R07_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R07_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R07_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R07_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R07_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R07_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR08Strt
+ */
+#define XDDR_XMPU4_CFG_R08_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000180UL )
+#define XDDR_XMPU4_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR08End
+ */
+#define XDDR_XMPU4_CFG_R08_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000184UL )
+#define XDDR_XMPU4_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R08_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R08_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR08Mstr
+ */
+#define XDDR_XMPU4_CFG_R08_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000188UL )
+#define XDDR_XMPU4_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR08
+ */
+#define XDDR_XMPU4_CFG_R08    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000018CUL )
+#define XDDR_XMPU4_CFG_R08_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R08_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R08_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R08_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R08_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R08_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R08_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R08_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R08_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R08_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR09Strt
+ */
+#define XDDR_XMPU4_CFG_R09_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000190UL )
+#define XDDR_XMPU4_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR09End
+ */
+#define XDDR_XMPU4_CFG_R09_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000194UL )
+#define XDDR_XMPU4_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R09_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R09_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR09Mstr
+ */
+#define XDDR_XMPU4_CFG_R09_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x00000198UL )
+#define XDDR_XMPU4_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR09
+ */
+#define XDDR_XMPU4_CFG_R09    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x0000019CUL )
+#define XDDR_XMPU4_CFG_R09_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R09_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R09_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R09_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R09_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R09_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R09_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R09_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R09_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R09_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR10Strt
+ */
+#define XDDR_XMPU4_CFG_R10_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001A0UL )
+#define XDDR_XMPU4_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR10End
+ */
+#define XDDR_XMPU4_CFG_R10_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001A4UL )
+#define XDDR_XMPU4_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R10_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R10_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR10Mstr
+ */
+#define XDDR_XMPU4_CFG_R10_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001A8UL )
+#define XDDR_XMPU4_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR10
+ */
+#define XDDR_XMPU4_CFG_R10    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001ACUL )
+#define XDDR_XMPU4_CFG_R10_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R10_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R10_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R10_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R10_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R10_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R10_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R10_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R10_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R10_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR11Strt
+ */
+#define XDDR_XMPU4_CFG_R11_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001B0UL )
+#define XDDR_XMPU4_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR11End
+ */
+#define XDDR_XMPU4_CFG_R11_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001B4UL )
+#define XDDR_XMPU4_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R11_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R11_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR11Mstr
+ */
+#define XDDR_XMPU4_CFG_R11_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001B8UL )
+#define XDDR_XMPU4_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR11
+ */
+#define XDDR_XMPU4_CFG_R11    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001BCUL )
+#define XDDR_XMPU4_CFG_R11_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R11_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R11_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R11_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R11_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R11_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R11_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R11_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R11_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R11_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR12Strt
+ */
+#define XDDR_XMPU4_CFG_R12_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001C0UL )
+#define XDDR_XMPU4_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR12End
+ */
+#define XDDR_XMPU4_CFG_R12_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001C4UL )
+#define XDDR_XMPU4_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R12_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R12_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR12Mstr
+ */
+#define XDDR_XMPU4_CFG_R12_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001C8UL )
+#define XDDR_XMPU4_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR12
+ */
+#define XDDR_XMPU4_CFG_R12    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001CCUL )
+#define XDDR_XMPU4_CFG_R12_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R12_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R12_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R12_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R12_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R12_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R12_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R12_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R12_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R12_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR13Strt
+ */
+#define XDDR_XMPU4_CFG_R13_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001D0UL )
+#define XDDR_XMPU4_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR13End
+ */
+#define XDDR_XMPU4_CFG_R13_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001D4UL )
+#define XDDR_XMPU4_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R13_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R13_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR13Mstr
+ */
+#define XDDR_XMPU4_CFG_R13_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001D8UL )
+#define XDDR_XMPU4_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR13
+ */
+#define XDDR_XMPU4_CFG_R13    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001DCUL )
+#define XDDR_XMPU4_CFG_R13_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R13_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R13_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R13_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R13_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R13_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R13_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R13_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R13_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R13_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR14Strt
+ */
+#define XDDR_XMPU4_CFG_R14_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001E0UL )
+#define XDDR_XMPU4_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR14End
+ */
+#define XDDR_XMPU4_CFG_R14_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001E4UL )
+#define XDDR_XMPU4_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R14_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R14_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR14Mstr
+ */
+#define XDDR_XMPU4_CFG_R14_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001E8UL )
+#define XDDR_XMPU4_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR14
+ */
+#define XDDR_XMPU4_CFG_R14    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001ECUL )
+#define XDDR_XMPU4_CFG_R14_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R14_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R14_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R14_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R14_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R14_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R14_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R14_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R14_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R14_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR15Strt
+ */
+#define XDDR_XMPU4_CFG_R15_STRT    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001F0UL )
+#define XDDR_XMPU4_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR15End
+ */
+#define XDDR_XMPU4_CFG_R15_END    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001F4UL )
+#define XDDR_XMPU4_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R15_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R15_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU4_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU4_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR15Mstr
+ */
+#define XDDR_XMPU4_CFG_R15_MSTR    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001F8UL )
+#define XDDR_XMPU4_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU4_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU4_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU4_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU4_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU4_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu4CfgR15
+ */
+#define XDDR_XMPU4_CFG_R15    ( ( XDDR_XMPU4_CFG_BASEADDR ) + 0x000001FCUL )
+#define XDDR_XMPU4_CFG_R15_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU4_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU4_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU4_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R15_REGNNS_SHIFT   3UL
+#define XDDR_XMPU4_CFG_R15_REGNNS_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU4_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU4_CFG_R15_WRALWD_SHIFT   2UL
+#define XDDR_XMPU4_CFG_R15_WRALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU4_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R15_RDALWD_SHIFT   1UL
+#define XDDR_XMPU4_CFG_R15_RDALWD_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU4_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU4_CFG_R15_EN_SHIFT   0UL
+#define XDDR_XMPU4_CFG_R15_EN_WIDTH   1UL
+#define XDDR_XMPU4_CFG_R15_EN_MASK    0x00000001UL
+#define XDDR_XMPU4_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XDDR_XMPU4_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu5_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu5_cfg.h
new file mode 100644
index 000000000..60811718d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xddr_xmpu5_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XDDR_XMPU5_CFG_H__
+#define __XDDR_XMPU5_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XddrXmpu5Cfg Base Address
+ */
+#define XDDR_XMPU5_CFG_BASEADDR      0xFD050000UL
+
+/**
+ * Register: XddrXmpu5CfgCtrl
+ */
+#define XDDR_XMPU5_CFG_CTRL    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000000UL )
+#define XDDR_XMPU5_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XDDR_XMPU5_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XDDR_XMPU5_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XDDR_XMPU5_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XDDR_XMPU5_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XDDR_XMPU5_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XDDR_XMPU5_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu5CfgErrSts1
+ */
+#define XDDR_XMPU5_CFG_ERR_STS1    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000004UL )
+#define XDDR_XMPU5_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XDDR_XMPU5_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XDDR_XMPU5_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgErrSts2
+ */
+#define XDDR_XMPU5_CFG_ERR_STS2    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000008UL )
+#define XDDR_XMPU5_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgPoison
+ */
+#define XDDR_XMPU5_CFG_POISON    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000000CUL )
+#define XDDR_XMPU5_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XDDR_XMPU5_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XDDR_XMPU5_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XDDR_XMPU5_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_POISON_BASE_SHIFT   0UL
+#define XDDR_XMPU5_CFG_POISON_BASE_WIDTH   20UL
+#define XDDR_XMPU5_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XDDR_XMPU5_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgIsr
+ */
+#define XDDR_XMPU5_CFG_ISR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000010UL )
+#define XDDR_XMPU5_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU5_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU5_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU5_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_ISR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU5_CFG_ISR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU5_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgImr
+ */
+#define XDDR_XMPU5_CFG_IMR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000014UL )
+#define XDDR_XMPU5_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XDDR_XMPU5_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU5_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU5_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU5_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_IMR_INV_APB_SHIFT   0UL
+#define XDDR_XMPU5_CFG_IMR_INV_APB_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XddrXmpu5CfgIen
+ */
+#define XDDR_XMPU5_CFG_IEN    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000018UL )
+#define XDDR_XMPU5_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU5_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU5_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU5_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_IEN_INV_APB_SHIFT   0UL
+#define XDDR_XMPU5_CFG_IEN_INV_APB_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgIds
+ */
+#define XDDR_XMPU5_CFG_IDS    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000001CUL )
+#define XDDR_XMPU5_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XDDR_XMPU5_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XDDR_XMPU5_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XDDR_XMPU5_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_IDS_INV_APB_SHIFT   0UL
+#define XDDR_XMPU5_CFG_IDS_INV_APB_WIDTH   1UL
+#define XDDR_XMPU5_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgLock
+ */
+#define XDDR_XMPU5_CFG_LOCK    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000020UL )
+#define XDDR_XMPU5_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XDDR_XMPU5_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR00Strt
+ */
+#define XDDR_XMPU5_CFG_R00_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000100UL )
+#define XDDR_XMPU5_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR00End
+ */
+#define XDDR_XMPU5_CFG_R00_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000104UL )
+#define XDDR_XMPU5_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R00_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R00_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR00Mstr
+ */
+#define XDDR_XMPU5_CFG_R00_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000108UL )
+#define XDDR_XMPU5_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR00
+ */
+#define XDDR_XMPU5_CFG_R00    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000010CUL )
+#define XDDR_XMPU5_CFG_R00_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R00_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R00_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R00_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R00_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R00_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R00_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R00_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R00_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R00_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR01Strt
+ */
+#define XDDR_XMPU5_CFG_R01_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000110UL )
+#define XDDR_XMPU5_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR01End
+ */
+#define XDDR_XMPU5_CFG_R01_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000114UL )
+#define XDDR_XMPU5_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R01_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R01_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR01Mstr
+ */
+#define XDDR_XMPU5_CFG_R01_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000118UL )
+#define XDDR_XMPU5_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR01
+ */
+#define XDDR_XMPU5_CFG_R01    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000011CUL )
+#define XDDR_XMPU5_CFG_R01_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R01_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R01_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R01_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R01_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R01_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R01_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R01_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R01_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R01_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR02Strt
+ */
+#define XDDR_XMPU5_CFG_R02_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000120UL )
+#define XDDR_XMPU5_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR02End
+ */
+#define XDDR_XMPU5_CFG_R02_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000124UL )
+#define XDDR_XMPU5_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R02_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R02_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR02Mstr
+ */
+#define XDDR_XMPU5_CFG_R02_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000128UL )
+#define XDDR_XMPU5_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR02
+ */
+#define XDDR_XMPU5_CFG_R02    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000012CUL )
+#define XDDR_XMPU5_CFG_R02_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R02_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R02_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R02_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R02_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R02_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R02_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R02_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R02_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R02_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR03Strt
+ */
+#define XDDR_XMPU5_CFG_R03_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000130UL )
+#define XDDR_XMPU5_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR03End
+ */
+#define XDDR_XMPU5_CFG_R03_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000134UL )
+#define XDDR_XMPU5_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R03_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R03_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR03Mstr
+ */
+#define XDDR_XMPU5_CFG_R03_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000138UL )
+#define XDDR_XMPU5_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR03
+ */
+#define XDDR_XMPU5_CFG_R03    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000013CUL )
+#define XDDR_XMPU5_CFG_R03_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R03_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R03_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R03_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R03_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R03_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R03_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R03_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R03_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R03_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR04Strt
+ */
+#define XDDR_XMPU5_CFG_R04_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000140UL )
+#define XDDR_XMPU5_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR04End
+ */
+#define XDDR_XMPU5_CFG_R04_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000144UL )
+#define XDDR_XMPU5_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R04_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R04_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR04Mstr
+ */
+#define XDDR_XMPU5_CFG_R04_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000148UL )
+#define XDDR_XMPU5_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR04
+ */
+#define XDDR_XMPU5_CFG_R04    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000014CUL )
+#define XDDR_XMPU5_CFG_R04_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R04_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R04_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R04_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R04_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R04_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R04_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R04_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R04_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R04_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR05Strt
+ */
+#define XDDR_XMPU5_CFG_R05_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000150UL )
+#define XDDR_XMPU5_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR05End
+ */
+#define XDDR_XMPU5_CFG_R05_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000154UL )
+#define XDDR_XMPU5_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R05_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R05_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR05Mstr
+ */
+#define XDDR_XMPU5_CFG_R05_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000158UL )
+#define XDDR_XMPU5_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR05
+ */
+#define XDDR_XMPU5_CFG_R05    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000015CUL )
+#define XDDR_XMPU5_CFG_R05_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R05_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R05_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R05_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R05_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R05_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R05_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R05_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R05_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R05_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR06Strt
+ */
+#define XDDR_XMPU5_CFG_R06_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000160UL )
+#define XDDR_XMPU5_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR06End
+ */
+#define XDDR_XMPU5_CFG_R06_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000164UL )
+#define XDDR_XMPU5_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R06_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R06_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR06Mstr
+ */
+#define XDDR_XMPU5_CFG_R06_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000168UL )
+#define XDDR_XMPU5_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR06
+ */
+#define XDDR_XMPU5_CFG_R06    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000016CUL )
+#define XDDR_XMPU5_CFG_R06_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R06_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R06_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R06_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R06_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R06_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R06_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R06_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R06_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R06_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR07Strt
+ */
+#define XDDR_XMPU5_CFG_R07_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000170UL )
+#define XDDR_XMPU5_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR07End
+ */
+#define XDDR_XMPU5_CFG_R07_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000174UL )
+#define XDDR_XMPU5_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R07_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R07_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR07Mstr
+ */
+#define XDDR_XMPU5_CFG_R07_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000178UL )
+#define XDDR_XMPU5_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR07
+ */
+#define XDDR_XMPU5_CFG_R07    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000017CUL )
+#define XDDR_XMPU5_CFG_R07_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R07_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R07_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R07_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R07_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R07_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R07_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R07_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R07_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R07_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR08Strt
+ */
+#define XDDR_XMPU5_CFG_R08_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000180UL )
+#define XDDR_XMPU5_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR08End
+ */
+#define XDDR_XMPU5_CFG_R08_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000184UL )
+#define XDDR_XMPU5_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R08_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R08_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR08Mstr
+ */
+#define XDDR_XMPU5_CFG_R08_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000188UL )
+#define XDDR_XMPU5_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR08
+ */
+#define XDDR_XMPU5_CFG_R08    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000018CUL )
+#define XDDR_XMPU5_CFG_R08_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R08_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R08_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R08_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R08_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R08_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R08_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R08_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R08_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R08_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR09Strt
+ */
+#define XDDR_XMPU5_CFG_R09_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000190UL )
+#define XDDR_XMPU5_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR09End
+ */
+#define XDDR_XMPU5_CFG_R09_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000194UL )
+#define XDDR_XMPU5_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R09_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R09_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR09Mstr
+ */
+#define XDDR_XMPU5_CFG_R09_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x00000198UL )
+#define XDDR_XMPU5_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR09
+ */
+#define XDDR_XMPU5_CFG_R09    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x0000019CUL )
+#define XDDR_XMPU5_CFG_R09_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R09_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R09_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R09_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R09_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R09_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R09_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R09_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R09_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R09_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR10Strt
+ */
+#define XDDR_XMPU5_CFG_R10_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001A0UL )
+#define XDDR_XMPU5_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR10End
+ */
+#define XDDR_XMPU5_CFG_R10_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001A4UL )
+#define XDDR_XMPU5_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R10_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R10_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR10Mstr
+ */
+#define XDDR_XMPU5_CFG_R10_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001A8UL )
+#define XDDR_XMPU5_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR10
+ */
+#define XDDR_XMPU5_CFG_R10    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001ACUL )
+#define XDDR_XMPU5_CFG_R10_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R10_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R10_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R10_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R10_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R10_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R10_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R10_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R10_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R10_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR11Strt
+ */
+#define XDDR_XMPU5_CFG_R11_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001B0UL )
+#define XDDR_XMPU5_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR11End
+ */
+#define XDDR_XMPU5_CFG_R11_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001B4UL )
+#define XDDR_XMPU5_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R11_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R11_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR11Mstr
+ */
+#define XDDR_XMPU5_CFG_R11_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001B8UL )
+#define XDDR_XMPU5_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR11
+ */
+#define XDDR_XMPU5_CFG_R11    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001BCUL )
+#define XDDR_XMPU5_CFG_R11_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R11_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R11_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R11_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R11_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R11_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R11_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R11_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R11_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R11_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR12Strt
+ */
+#define XDDR_XMPU5_CFG_R12_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001C0UL )
+#define XDDR_XMPU5_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR12End
+ */
+#define XDDR_XMPU5_CFG_R12_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001C4UL )
+#define XDDR_XMPU5_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R12_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R12_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR12Mstr
+ */
+#define XDDR_XMPU5_CFG_R12_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001C8UL )
+#define XDDR_XMPU5_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR12
+ */
+#define XDDR_XMPU5_CFG_R12    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001CCUL )
+#define XDDR_XMPU5_CFG_R12_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R12_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R12_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R12_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R12_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R12_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R12_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R12_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R12_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R12_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR13Strt
+ */
+#define XDDR_XMPU5_CFG_R13_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001D0UL )
+#define XDDR_XMPU5_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR13End
+ */
+#define XDDR_XMPU5_CFG_R13_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001D4UL )
+#define XDDR_XMPU5_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R13_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R13_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR13Mstr
+ */
+#define XDDR_XMPU5_CFG_R13_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001D8UL )
+#define XDDR_XMPU5_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR13
+ */
+#define XDDR_XMPU5_CFG_R13    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001DCUL )
+#define XDDR_XMPU5_CFG_R13_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R13_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R13_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R13_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R13_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R13_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R13_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R13_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R13_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R13_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR14Strt
+ */
+#define XDDR_XMPU5_CFG_R14_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001E0UL )
+#define XDDR_XMPU5_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR14End
+ */
+#define XDDR_XMPU5_CFG_R14_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001E4UL )
+#define XDDR_XMPU5_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R14_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R14_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR14Mstr
+ */
+#define XDDR_XMPU5_CFG_R14_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001E8UL )
+#define XDDR_XMPU5_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR14
+ */
+#define XDDR_XMPU5_CFG_R14    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001ECUL )
+#define XDDR_XMPU5_CFG_R14_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R14_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R14_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R14_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R14_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R14_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R14_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R14_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R14_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R14_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR15Strt
+ */
+#define XDDR_XMPU5_CFG_R15_STRT    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001F0UL )
+#define XDDR_XMPU5_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR15End
+ */
+#define XDDR_XMPU5_CFG_R15_END    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001F4UL )
+#define XDDR_XMPU5_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R15_END_ADDR_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R15_END_ADDR_WIDTH   28UL
+#define XDDR_XMPU5_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XDDR_XMPU5_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR15Mstr
+ */
+#define XDDR_XMPU5_CFG_R15_MSTR    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001F8UL )
+#define XDDR_XMPU5_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XDDR_XMPU5_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XDDR_XMPU5_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XDDR_XMPU5_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XDDR_XMPU5_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XDDR_XMPU5_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XddrXmpu5CfgR15
+ */
+#define XDDR_XMPU5_CFG_R15    ( ( XDDR_XMPU5_CFG_BASEADDR ) + 0x000001FCUL )
+#define XDDR_XMPU5_CFG_R15_RSTVAL   0x00000008UL
+
+#define XDDR_XMPU5_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XDDR_XMPU5_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XDDR_XMPU5_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R15_REGNNS_SHIFT   3UL
+#define XDDR_XMPU5_CFG_R15_REGNNS_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XDDR_XMPU5_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XDDR_XMPU5_CFG_R15_WRALWD_SHIFT   2UL
+#define XDDR_XMPU5_CFG_R15_WRALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XDDR_XMPU5_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R15_RDALWD_SHIFT   1UL
+#define XDDR_XMPU5_CFG_R15_RDALWD_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XDDR_XMPU5_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XDDR_XMPU5_CFG_R15_EN_SHIFT   0UL
+#define XDDR_XMPU5_CFG_R15_EN_WIDTH   1UL
+#define XDDR_XMPU5_CFG_R15_EN_MASK    0x00000001UL
+#define XDDR_XMPU5_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XDDR_XMPU5_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_slcr.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_slcr.h
new file mode 100644
index 000000000..b565b958a
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_slcr.h
@@ -0,0 +1,382 @@
+/* ### HEADER ### */
+
+#ifndef __XFPD_SLCR_H__
+#define __XFPD_SLCR_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XfpdSlcr Base Address
+ */
+#define XFPD_SLCR_BASEADDR      0xFD610000UL
+
+/**
+ * Register: XfpdSlcrWprot0
+ */
+#define XFPD_SLCR_WPROT0    ( ( XFPD_SLCR_BASEADDR ) + 0x00000000UL )
+#define XFPD_SLCR_WPROT0_RSTVAL   0x00000001UL
+
+#define XFPD_SLCR_WPROT0_ACT_SHIFT   0UL
+#define XFPD_SLCR_WPROT0_ACT_WIDTH   1UL
+#define XFPD_SLCR_WPROT0_ACT_MASK    0x00000001UL
+#define XFPD_SLCR_WPROT0_ACT_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrCtrl
+ */
+#define XFPD_SLCR_CTRL    ( ( XFPD_SLCR_BASEADDR ) + 0x00000004UL )
+#define XFPD_SLCR_CTRL_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_CTRL_SLVERR_EN_SHIFT   0UL
+#define XFPD_SLCR_CTRL_SLVERR_EN_WIDTH   1UL
+#define XFPD_SLCR_CTRL_SLVERR_EN_MASK    0x00000001UL
+#define XFPD_SLCR_CTRL_SLVERR_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrIsr
+ */
+#define XFPD_SLCR_ISR    ( ( XFPD_SLCR_BASEADDR ) + 0x00000008UL )
+#define XFPD_SLCR_ISR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_ISR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_ISR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_ISR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_ISR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrImr
+ */
+#define XFPD_SLCR_IMR    ( ( XFPD_SLCR_BASEADDR ) + 0x0000000CUL )
+#define XFPD_SLCR_IMR_RSTVAL   0x00000001UL
+
+#define XFPD_SLCR_IMR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_IMR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_IMR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_IMR_ADDR_DECD_ERR_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrIer
+ */
+#define XFPD_SLCR_IER    ( ( XFPD_SLCR_BASEADDR ) + 0x00000010UL )
+#define XFPD_SLCR_IER_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_IER_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_IER_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_IER_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_IER_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrIdr
+ */
+#define XFPD_SLCR_IDR    ( ( XFPD_SLCR_BASEADDR ) + 0x00000014UL )
+#define XFPD_SLCR_IDR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_IDR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_IDR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_IDR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_IDR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrItr
+ */
+#define XFPD_SLCR_ITR    ( ( XFPD_SLCR_BASEADDR ) + 0x00000018UL )
+#define XFPD_SLCR_ITR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_ITR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_ITR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_ITR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_ITR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrWdtClkSel
+ */
+#define XFPD_SLCR_WDT_CLK_SEL    ( ( XFPD_SLCR_BASEADDR ) + 0x00000100UL )
+#define XFPD_SLCR_WDT_CLK_SEL_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_WDT_CLK_SEL_SHIFT   0UL
+#define XFPD_SLCR_WDT_CLK_SEL_WIDTH   1UL
+#define XFPD_SLCR_WDT_CLK_SEL_MASK    0x00000001UL
+#define XFPD_SLCR_WDT_CLK_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrIntFpd
+ */
+#define XFPD_SLCR_INT_FPD    ( ( XFPD_SLCR_BASEADDR ) + 0x00000200UL )
+#define XFPD_SLCR_INT_FPD_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_INT_FPD_GFM_SEL_SHIFT   0UL
+#define XFPD_SLCR_INT_FPD_GFM_SEL_WIDTH   1UL
+#define XFPD_SLCR_INT_FPD_GFM_SEL_MASK    0x00000001UL
+#define XFPD_SLCR_INT_FPD_GFM_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrGpu
+ */
+#define XFPD_SLCR_GPU    ( ( XFPD_SLCR_BASEADDR ) + 0x0000100CUL )
+#define XFPD_SLCR_GPU_RSTVAL   0x00000007UL
+
+#define XFPD_SLCR_GPU_ARCACHE_SHIFT   7UL
+#define XFPD_SLCR_GPU_ARCACHE_WIDTH   4UL
+#define XFPD_SLCR_GPU_ARCACHE_MASK    0x00000780UL
+#define XFPD_SLCR_GPU_ARCACHE_DEFVAL  0x0UL
+
+#define XFPD_SLCR_GPU_AWCACHE_SHIFT   3UL
+#define XFPD_SLCR_GPU_AWCACHE_WIDTH   4UL
+#define XFPD_SLCR_GPU_AWCACHE_MASK    0x00000078UL
+#define XFPD_SLCR_GPU_AWCACHE_DEFVAL  0x0UL
+
+#define XFPD_SLCR_GPU_PP1_IDLE_SHIFT   2UL
+#define XFPD_SLCR_GPU_PP1_IDLE_WIDTH   1UL
+#define XFPD_SLCR_GPU_PP1_IDLE_MASK    0x00000004UL
+#define XFPD_SLCR_GPU_PP1_IDLE_DEFVAL  0x1UL
+
+#define XFPD_SLCR_GPU_PP0_IDLE_SHIFT   1UL
+#define XFPD_SLCR_GPU_PP0_IDLE_WIDTH   1UL
+#define XFPD_SLCR_GPU_PP0_IDLE_MASK    0x00000002UL
+#define XFPD_SLCR_GPU_PP0_IDLE_DEFVAL  0x1UL
+
+#define XFPD_SLCR_GPU_IDLE_SHIFT   0UL
+#define XFPD_SLCR_GPU_IDLE_WIDTH   1UL
+#define XFPD_SLCR_GPU_IDLE_MASK    0x00000001UL
+#define XFPD_SLCR_GPU_IDLE_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrGdmaCfg
+ */
+#define XFPD_SLCR_GDMA_CFG    ( ( XFPD_SLCR_BASEADDR ) + 0x00003000UL )
+#define XFPD_SLCR_GDMA_CFG_RSTVAL   0x00000048UL
+
+#define XFPD_SLCR_GDMA_CFG_BUS_WIDTH_SHIFT   5UL
+#define XFPD_SLCR_GDMA_CFG_BUS_WIDTH_WIDTH   2UL
+#define XFPD_SLCR_GDMA_CFG_BUS_WIDTH_MASK    0x00000060UL
+#define XFPD_SLCR_GDMA_CFG_BUS_WIDTH_DEFVAL  0x2UL
+
+#define XFPD_SLCR_GDMA_CFG_NUM_CH_SHIFT   0UL
+#define XFPD_SLCR_GDMA_CFG_NUM_CH_WIDTH   5UL
+#define XFPD_SLCR_GDMA_CFG_NUM_CH_MASK    0x0000001fUL
+#define XFPD_SLCR_GDMA_CFG_NUM_CH_DEFVAL  0x8UL
+
+/**
+ * Register: XfpdSlcrGdma
+ */
+#define XFPD_SLCR_GDMA    ( ( XFPD_SLCR_BASEADDR ) + 0x00003010UL )
+#define XFPD_SLCR_GDMA_RSTVAL   0x00003b3bUL
+
+#define XFPD_SLCR_GDMA_RAM1_EMAB_SHIFT   12UL
+#define XFPD_SLCR_GDMA_RAM1_EMAB_WIDTH   3UL
+#define XFPD_SLCR_GDMA_RAM1_EMAB_MASK    0x00007000UL
+#define XFPD_SLCR_GDMA_RAM1_EMAB_DEFVAL  0x3UL
+
+#define XFPD_SLCR_GDMA_RAM1_EMASA_SHIFT   11UL
+#define XFPD_SLCR_GDMA_RAM1_EMASA_WIDTH   1UL
+#define XFPD_SLCR_GDMA_RAM1_EMASA_MASK    0x00000800UL
+#define XFPD_SLCR_GDMA_RAM1_EMASA_DEFVAL  0x1UL
+
+#define XFPD_SLCR_GDMA_RAM1_EMAA_SHIFT   8UL
+#define XFPD_SLCR_GDMA_RAM1_EMAA_WIDTH   3UL
+#define XFPD_SLCR_GDMA_RAM1_EMAA_MASK    0x00000700UL
+#define XFPD_SLCR_GDMA_RAM1_EMAA_DEFVAL  0x3UL
+
+#define XFPD_SLCR_GDMA_RAM0_EMAB_SHIFT   4UL
+#define XFPD_SLCR_GDMA_RAM0_EMAB_WIDTH   3UL
+#define XFPD_SLCR_GDMA_RAM0_EMAB_MASK    0x00000070UL
+#define XFPD_SLCR_GDMA_RAM0_EMAB_DEFVAL  0x3UL
+
+#define XFPD_SLCR_GDMA_RAM0_EMASA_SHIFT   3UL
+#define XFPD_SLCR_GDMA_RAM0_EMASA_WIDTH   1UL
+#define XFPD_SLCR_GDMA_RAM0_EMASA_MASK    0x00000008UL
+#define XFPD_SLCR_GDMA_RAM0_EMASA_DEFVAL  0x1UL
+
+#define XFPD_SLCR_GDMA_RAM0_EMAA_SHIFT   0UL
+#define XFPD_SLCR_GDMA_RAM0_EMAA_WIDTH   3UL
+#define XFPD_SLCR_GDMA_RAM0_EMAA_MASK    0x00000007UL
+#define XFPD_SLCR_GDMA_RAM0_EMAA_DEFVAL  0x3UL
+
+/**
+ * Register: XfpdSlcrAfiFs
+ */
+#define XFPD_SLCR_AFI_FS    ( ( XFPD_SLCR_BASEADDR ) + 0x00005000UL )
+#define XFPD_SLCR_AFI_FS_RSTVAL   0x00000a00UL
+
+#define XFPD_SLCR_AFI_FS_DW_SS1_SEL_SHIFT   10UL
+#define XFPD_SLCR_AFI_FS_DW_SS1_SEL_WIDTH   2UL
+#define XFPD_SLCR_AFI_FS_DW_SS1_SEL_MASK    0x00000c00UL
+#define XFPD_SLCR_AFI_FS_DW_SS1_SEL_DEFVAL  0x2UL
+
+#define XFPD_SLCR_AFI_FS_DW_SS0_SEL_SHIFT   8UL
+#define XFPD_SLCR_AFI_FS_DW_SS0_SEL_WIDTH   2UL
+#define XFPD_SLCR_AFI_FS_DW_SS0_SEL_MASK    0x00000300UL
+#define XFPD_SLCR_AFI_FS_DW_SS0_SEL_DEFVAL  0x2UL
+
+/**
+ * Register: XfpdSlcrErrAtbIsr
+ */
+#define XFPD_SLCR_ERR_ATB_ISR    ( ( XFPD_SLCR_BASEADDR ) + 0x00006000UL )
+#define XFPD_SLCR_ERR_ATB_ISR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS1_SHIFT   2UL
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS1_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS1_MASK    0x00000004UL
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS1_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS0_SHIFT   1UL
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS0_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS0_MASK    0x00000002UL
+#define XFPD_SLCR_ERR_ATB_ISR_AFIFS0_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ERR_ATB_ISR_FPDS_SHIFT   0UL
+#define XFPD_SLCR_ERR_ATB_ISR_FPDS_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_ISR_FPDS_MASK    0x00000001UL
+#define XFPD_SLCR_ERR_ATB_ISR_FPDS_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrErrAtbImr
+ */
+#define XFPD_SLCR_ERR_ATB_IMR    ( ( XFPD_SLCR_BASEADDR ) + 0x00006004UL )
+#define XFPD_SLCR_ERR_ATB_IMR_RSTVAL   0x00000007UL
+
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS1_SHIFT   2UL
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS1_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS1_MASK    0x00000004UL
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS1_DEFVAL  0x1UL
+
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS0_SHIFT   1UL
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS0_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS0_MASK    0x00000002UL
+#define XFPD_SLCR_ERR_ATB_IMR_AFIFS0_DEFVAL  0x1UL
+
+#define XFPD_SLCR_ERR_ATB_IMR_FPDS_SHIFT   0UL
+#define XFPD_SLCR_ERR_ATB_IMR_FPDS_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IMR_FPDS_MASK    0x00000001UL
+#define XFPD_SLCR_ERR_ATB_IMR_FPDS_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrErrAtbIer
+ */
+#define XFPD_SLCR_ERR_ATB_IER    ( ( XFPD_SLCR_BASEADDR ) + 0x00006008UL )
+#define XFPD_SLCR_ERR_ATB_IER_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS1_SHIFT   2UL
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS1_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS1_MASK    0x00000004UL
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS1_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS0_SHIFT   1UL
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS0_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS0_MASK    0x00000002UL
+#define XFPD_SLCR_ERR_ATB_IER_AFIFS0_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ERR_ATB_IER_FPDS_SHIFT   0UL
+#define XFPD_SLCR_ERR_ATB_IER_FPDS_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IER_FPDS_MASK    0x00000001UL
+#define XFPD_SLCR_ERR_ATB_IER_FPDS_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrErrAtbIdr
+ */
+#define XFPD_SLCR_ERR_ATB_IDR    ( ( XFPD_SLCR_BASEADDR ) + 0x0000600CUL )
+#define XFPD_SLCR_ERR_ATB_IDR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS1_SHIFT   2UL
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS1_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS1_MASK    0x00000004UL
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS1_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS0_SHIFT   1UL
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS0_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS0_MASK    0x00000002UL
+#define XFPD_SLCR_ERR_ATB_IDR_AFIFS0_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ERR_ATB_IDR_FPDS_SHIFT   0UL
+#define XFPD_SLCR_ERR_ATB_IDR_FPDS_WIDTH   1UL
+#define XFPD_SLCR_ERR_ATB_IDR_FPDS_MASK    0x00000001UL
+#define XFPD_SLCR_ERR_ATB_IDR_FPDS_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrAtbCmdstore
+ */
+#define XFPD_SLCR_ATB_CMDSTORE    ( ( XFPD_SLCR_BASEADDR ) + 0x00006010UL )
+#define XFPD_SLCR_ATB_CMDSTORE_RSTVAL   0x00000007UL
+
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS1_SHIFT   2UL
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS1_WIDTH   1UL
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS1_MASK    0x00000004UL
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS1_DEFVAL  0x1UL
+
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS0_SHIFT   1UL
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS0_WIDTH   1UL
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS0_MASK    0x00000002UL
+#define XFPD_SLCR_ATB_CMDSTORE_AFIFS0_DEFVAL  0x1UL
+
+#define XFPD_SLCR_ATB_CMDSTORE_FPDS_SHIFT   0UL
+#define XFPD_SLCR_ATB_CMDSTORE_FPDS_WIDTH   1UL
+#define XFPD_SLCR_ATB_CMDSTORE_FPDS_MASK    0x00000001UL
+#define XFPD_SLCR_ATB_CMDSTORE_FPDS_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrAtbRespEn
+ */
+#define XFPD_SLCR_ATB_RESP_EN    ( ( XFPD_SLCR_BASEADDR ) + 0x00006014UL )
+#define XFPD_SLCR_ATB_RESP_EN_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS1_SHIFT   2UL
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS1_WIDTH   1UL
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS1_MASK    0x00000004UL
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS1_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS0_SHIFT   1UL
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS0_WIDTH   1UL
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS0_MASK    0x00000002UL
+#define XFPD_SLCR_ATB_RESP_EN_AFIFS0_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ATB_RESP_EN_FPDS_SHIFT   0UL
+#define XFPD_SLCR_ATB_RESP_EN_FPDS_WIDTH   1UL
+#define XFPD_SLCR_ATB_RESP_EN_FPDS_MASK    0x00000001UL
+#define XFPD_SLCR_ATB_RESP_EN_FPDS_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrAtbResptype
+ */
+#define XFPD_SLCR_ATB_RESPTYPE    ( ( XFPD_SLCR_BASEADDR ) + 0x00006018UL )
+#define XFPD_SLCR_ATB_RESPTYPE_RSTVAL   0x00000007UL
+
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS1_SHIFT   2UL
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS1_WIDTH   1UL
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS1_MASK    0x00000004UL
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS1_DEFVAL  0x1UL
+
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS0_SHIFT   1UL
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS0_WIDTH   1UL
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS0_MASK    0x00000002UL
+#define XFPD_SLCR_ATB_RESPTYPE_AFIFS0_DEFVAL  0x1UL
+
+#define XFPD_SLCR_ATB_RESPTYPE_FPDS_SHIFT   0UL
+#define XFPD_SLCR_ATB_RESPTYPE_FPDS_WIDTH   1UL
+#define XFPD_SLCR_ATB_RESPTYPE_FPDS_MASK    0x00000001UL
+#define XFPD_SLCR_ATB_RESPTYPE_FPDS_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrAtbPrescale
+ */
+#define XFPD_SLCR_ATB_PRESCALE    ( ( XFPD_SLCR_BASEADDR ) + 0x00006020UL )
+#define XFPD_SLCR_ATB_PRESCALE_RSTVAL   0x0000ffffUL
+
+#define XFPD_SLCR_ATB_PRESCALE_EN_SHIFT   16UL
+#define XFPD_SLCR_ATB_PRESCALE_EN_WIDTH   1UL
+#define XFPD_SLCR_ATB_PRESCALE_EN_MASK    0x00010000UL
+#define XFPD_SLCR_ATB_PRESCALE_EN_DEFVAL  0x0UL
+
+#define XFPD_SLCR_ATB_PRESCALE_VAL_SHIFT   0UL
+#define XFPD_SLCR_ATB_PRESCALE_VAL_WIDTH   16UL
+#define XFPD_SLCR_ATB_PRESCALE_VAL_MASK    0x0000ffffUL
+#define XFPD_SLCR_ATB_PRESCALE_VAL_DEFVAL  0xffffUL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XFPD_SLCR_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_slcr_secure.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_slcr_secure.h
new file mode 100644
index 000000000..6541a4f1d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_slcr_secure.h
@@ -0,0 +1,277 @@
+/* ### HEADER ### */
+
+#ifndef __XFPD_SLCR_SECURE_H__
+#define __XFPD_SLCR_SECURE_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XfpdSlcrSecure Base Address
+ */
+#define XFPD_SLCR_SECURE_BASEADDR      0xFD690000UL
+
+/**
+ * Register: XfpdSlcrSecCtrl
+ */
+#define XFPD_SLCR_SEC_CTRL    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000004UL )
+#define XFPD_SLCR_SEC_CTRL_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_SEC_CTRL_SLVERR_EN_SHIFT   0UL
+#define XFPD_SLCR_SEC_CTRL_SLVERR_EN_WIDTH   1UL
+#define XFPD_SLCR_SEC_CTRL_SLVERR_EN_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_CTRL_SLVERR_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrSecIsr
+ */
+#define XFPD_SLCR_SEC_ISR    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000008UL )
+#define XFPD_SLCR_SEC_ISR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_SEC_ISR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_SEC_ISR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_SEC_ISR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_ISR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrSecImr
+ */
+#define XFPD_SLCR_SEC_IMR    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x0000000CUL )
+#define XFPD_SLCR_SEC_IMR_RSTVAL   0x00000001UL
+
+#define XFPD_SLCR_SEC_IMR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_SEC_IMR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_SEC_IMR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_IMR_ADDR_DECD_ERR_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrSecIer
+ */
+#define XFPD_SLCR_SEC_IER    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000010UL )
+#define XFPD_SLCR_SEC_IER_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_SEC_IER_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_SEC_IER_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_SEC_IER_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_IER_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrSecIdr
+ */
+#define XFPD_SLCR_SEC_IDR    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000014UL )
+#define XFPD_SLCR_SEC_IDR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_SEC_IDR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_SEC_IDR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_SEC_IDR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_IDR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrSecItr
+ */
+#define XFPD_SLCR_SEC_ITR    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000018UL )
+#define XFPD_SLCR_SEC_ITR_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_SEC_ITR_ADDR_DECD_ERR_SHIFT   0UL
+#define XFPD_SLCR_SEC_ITR_ADDR_DECD_ERR_WIDTH   1UL
+#define XFPD_SLCR_SEC_ITR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_ITR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrSecSata
+ */
+#define XFPD_SLCR_SEC_SATA    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000020UL )
+#define XFPD_SLCR_SEC_SATA_RSTVAL   0x0000000eUL
+
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA1_SHIFT   3UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA1_WIDTH   1UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA1_MASK    0x00000008UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA1_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA0_SHIFT   2UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA0_WIDTH   1UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA0_MASK    0x00000004UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIMDMA0_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_SATA_TZ_AXIS_SHIFT   1UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIS_WIDTH   1UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIS_MASK    0x00000002UL
+#define XFPD_SLCR_SEC_SATA_TZ_AXIS_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_SATA_TZ_EN_SHIFT   0UL
+#define XFPD_SLCR_SEC_SATA_TZ_EN_WIDTH   1UL
+#define XFPD_SLCR_SEC_SATA_TZ_EN_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_SATA_TZ_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdSlcrSecPcie
+ */
+#define XFPD_SLCR_SEC_PCIE    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000030UL )
+#define XFPD_SLCR_SEC_PCIE_RSTVAL   0x01ffffffUL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_3_SHIFT   24UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_3_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_3_MASK    0x01000000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_3_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_2_SHIFT   23UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_2_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_2_MASK    0x00800000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_2_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_1_SHIFT   22UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_1_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_1_MASK    0x00400000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_1_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_0_SHIFT   21UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_0_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_0_MASK    0x00200000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_0_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_7_SHIFT   20UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_7_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_7_MASK    0x00100000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_7_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_6_SHIFT   19UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_6_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_6_MASK    0x00080000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_6_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_5_SHIFT   18UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_5_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_5_MASK    0x00040000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_5_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_4_SHIFT   17UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_4_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_4_MASK    0x00020000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_4_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_3_SHIFT   16UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_3_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_3_MASK    0x00010000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_3_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_2_SHIFT   15UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_2_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_2_MASK    0x00008000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_2_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_1_SHIFT   14UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_1_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_1_MASK    0x00004000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_1_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_0_SHIFT   13UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_0_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_0_MASK    0x00002000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_INGR_0_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_7_SHIFT   12UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_7_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_7_MASK    0x00001000UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_7_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_6_SHIFT   11UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_6_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_6_MASK    0x00000800UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_6_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_5_SHIFT   10UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_5_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_5_MASK    0x00000400UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_5_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_4_SHIFT   9UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_4_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_4_MASK    0x00000200UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_4_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_3_SHIFT   8UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_3_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_3_MASK    0x00000100UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_3_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_2_SHIFT   7UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_2_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_2_MASK    0x00000080UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_2_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_1_SHIFT   6UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_1_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_1_MASK    0x00000040UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_1_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_0_SHIFT   5UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_0_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_0_MASK    0x00000020UL
+#define XFPD_SLCR_SEC_PCIE_TZ_AT_EGR_0_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_REGS_SHIFT   4UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_REGS_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_REGS_MASK    0x00000010UL
+#define XFPD_SLCR_SEC_PCIE_TZ_DMA_REGS_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_PBA_SHIFT   3UL
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_PBA_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_PBA_MASK    0x00000008UL
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_PBA_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_TABLE_SHIFT   2UL
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_TABLE_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_TABLE_MASK    0x00000004UL
+#define XFPD_SLCR_SEC_PCIE_TZ_MSIX_TABLE_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_ECAM_SHIFT   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_ECAM_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_ECAM_MASK    0x00000002UL
+#define XFPD_SLCR_SEC_PCIE_TZ_ECAM_DEFVAL  0x1UL
+
+#define XFPD_SLCR_SEC_PCIE_TZ_BRIDGE_REGS_SHIFT   0UL
+#define XFPD_SLCR_SEC_PCIE_TZ_BRIDGE_REGS_WIDTH   1UL
+#define XFPD_SLCR_SEC_PCIE_TZ_BRIDGE_REGS_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_PCIE_TZ_BRIDGE_REGS_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrSecDpdma
+ */
+#define XFPD_SLCR_SEC_DPDMA    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000040UL )
+#define XFPD_SLCR_SEC_DPDMA_RSTVAL   0x00000001UL
+
+#define XFPD_SLCR_SEC_DPDMA_TZ_SHIFT   0UL
+#define XFPD_SLCR_SEC_DPDMA_TZ_WIDTH   1UL
+#define XFPD_SLCR_SEC_DPDMA_TZ_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_DPDMA_TZ_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdSlcrSecGdma
+ */
+#define XFPD_SLCR_SEC_GDMA    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000050UL )
+#define XFPD_SLCR_SEC_GDMA_RSTVAL   0x000000ffUL
+
+#define XFPD_SLCR_SEC_GDMA_TZ_SHIFT   0UL
+#define XFPD_SLCR_SEC_GDMA_TZ_WIDTH   8UL
+#define XFPD_SLCR_SEC_GDMA_TZ_MASK    0x000000ffUL
+#define XFPD_SLCR_SEC_GDMA_TZ_DEFVAL  0xffUL
+
+/**
+ * Register: XfpdSlcrSecGic
+ */
+#define XFPD_SLCR_SEC_GIC    ( ( XFPD_SLCR_SECURE_BASEADDR ) + 0x00000060UL )
+#define XFPD_SLCR_SEC_GIC_RSTVAL   0x00000000UL
+
+#define XFPD_SLCR_SEC_GIC_CFG_DIS_SHIFT   0UL
+#define XFPD_SLCR_SEC_GIC_CFG_DIS_WIDTH   1UL
+#define XFPD_SLCR_SEC_GIC_CFG_DIS_MASK    0x00000001UL
+#define XFPD_SLCR_SEC_GIC_CFG_DIS_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XFPD_SLCR_SECURE_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_xmpu_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_xmpu_cfg.h
new file mode 100644
index 000000000..75aef19f9
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_xmpu_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XFPD_XMPU_CFG_H__
+#define __XFPD_XMPU_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XfpdXmpuCfg Base Address
+ */
+#define XFPD_XMPU_CFG_BASEADDR      0xFD5D0000UL
+
+/**
+ * Register: XfpdXmpuCfgCtrl
+ */
+#define XFPD_XMPU_CFG_CTRL    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000000UL )
+#define XFPD_XMPU_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XFPD_XMPU_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XFPD_XMPU_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XFPD_XMPU_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XFPD_XMPU_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XFPD_XMPU_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XFPD_XMPU_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdXmpuCfgErrSts1
+ */
+#define XFPD_XMPU_CFG_ERR_STS1    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000004UL )
+#define XFPD_XMPU_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XFPD_XMPU_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XFPD_XMPU_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgErrSts2
+ */
+#define XFPD_XMPU_CFG_ERR_STS2    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000008UL )
+#define XFPD_XMPU_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgPoison
+ */
+#define XFPD_XMPU_CFG_POISON    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000000CUL )
+#define XFPD_XMPU_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XFPD_XMPU_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XFPD_XMPU_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XFPD_XMPU_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_POISON_BASE_SHIFT   0UL
+#define XFPD_XMPU_CFG_POISON_BASE_WIDTH   20UL
+#define XFPD_XMPU_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XFPD_XMPU_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgIsr
+ */
+#define XFPD_XMPU_CFG_ISR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000010UL )
+#define XFPD_XMPU_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XFPD_XMPU_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XFPD_XMPU_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XFPD_XMPU_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_ISR_INV_APB_SHIFT   0UL
+#define XFPD_XMPU_CFG_ISR_INV_APB_WIDTH   1UL
+#define XFPD_XMPU_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgImr
+ */
+#define XFPD_XMPU_CFG_IMR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000014UL )
+#define XFPD_XMPU_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XFPD_XMPU_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XFPD_XMPU_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XFPD_XMPU_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XFPD_XMPU_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_IMR_INV_APB_SHIFT   0UL
+#define XFPD_XMPU_CFG_IMR_INV_APB_WIDTH   1UL
+#define XFPD_XMPU_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdXmpuCfgIen
+ */
+#define XFPD_XMPU_CFG_IEN    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000018UL )
+#define XFPD_XMPU_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XFPD_XMPU_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XFPD_XMPU_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XFPD_XMPU_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_IEN_INV_APB_SHIFT   0UL
+#define XFPD_XMPU_CFG_IEN_INV_APB_WIDTH   1UL
+#define XFPD_XMPU_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgIds
+ */
+#define XFPD_XMPU_CFG_IDS    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000001CUL )
+#define XFPD_XMPU_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XFPD_XMPU_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XFPD_XMPU_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XFPD_XMPU_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XFPD_XMPU_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_IDS_INV_APB_SHIFT   0UL
+#define XFPD_XMPU_CFG_IDS_INV_APB_WIDTH   1UL
+#define XFPD_XMPU_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgLock
+ */
+#define XFPD_XMPU_CFG_LOCK    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000020UL )
+#define XFPD_XMPU_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XFPD_XMPU_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XFPD_XMPU_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR00Strt
+ */
+#define XFPD_XMPU_CFG_R00_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000100UL )
+#define XFPD_XMPU_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR00End
+ */
+#define XFPD_XMPU_CFG_R00_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000104UL )
+#define XFPD_XMPU_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R00_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R00_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR00Mstr
+ */
+#define XFPD_XMPU_CFG_R00_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000108UL )
+#define XFPD_XMPU_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR00
+ */
+#define XFPD_XMPU_CFG_R00    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000010CUL )
+#define XFPD_XMPU_CFG_R00_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R00_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R00_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R00_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R00_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R00_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R00_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R00_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R00_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R00_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR01Strt
+ */
+#define XFPD_XMPU_CFG_R01_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000110UL )
+#define XFPD_XMPU_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR01End
+ */
+#define XFPD_XMPU_CFG_R01_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000114UL )
+#define XFPD_XMPU_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R01_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R01_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR01Mstr
+ */
+#define XFPD_XMPU_CFG_R01_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000118UL )
+#define XFPD_XMPU_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR01
+ */
+#define XFPD_XMPU_CFG_R01    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000011CUL )
+#define XFPD_XMPU_CFG_R01_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R01_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R01_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R01_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R01_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R01_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R01_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R01_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R01_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R01_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR02Strt
+ */
+#define XFPD_XMPU_CFG_R02_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000120UL )
+#define XFPD_XMPU_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR02End
+ */
+#define XFPD_XMPU_CFG_R02_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000124UL )
+#define XFPD_XMPU_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R02_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R02_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR02Mstr
+ */
+#define XFPD_XMPU_CFG_R02_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000128UL )
+#define XFPD_XMPU_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR02
+ */
+#define XFPD_XMPU_CFG_R02    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000012CUL )
+#define XFPD_XMPU_CFG_R02_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R02_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R02_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R02_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R02_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R02_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R02_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R02_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R02_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R02_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR03Strt
+ */
+#define XFPD_XMPU_CFG_R03_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000130UL )
+#define XFPD_XMPU_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR03End
+ */
+#define XFPD_XMPU_CFG_R03_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000134UL )
+#define XFPD_XMPU_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R03_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R03_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR03Mstr
+ */
+#define XFPD_XMPU_CFG_R03_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000138UL )
+#define XFPD_XMPU_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR03
+ */
+#define XFPD_XMPU_CFG_R03    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000013CUL )
+#define XFPD_XMPU_CFG_R03_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R03_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R03_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R03_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R03_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R03_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R03_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R03_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R03_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R03_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR04Strt
+ */
+#define XFPD_XMPU_CFG_R04_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000140UL )
+#define XFPD_XMPU_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR04End
+ */
+#define XFPD_XMPU_CFG_R04_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000144UL )
+#define XFPD_XMPU_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R04_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R04_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR04Mstr
+ */
+#define XFPD_XMPU_CFG_R04_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000148UL )
+#define XFPD_XMPU_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR04
+ */
+#define XFPD_XMPU_CFG_R04    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000014CUL )
+#define XFPD_XMPU_CFG_R04_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R04_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R04_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R04_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R04_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R04_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R04_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R04_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R04_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R04_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR05Strt
+ */
+#define XFPD_XMPU_CFG_R05_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000150UL )
+#define XFPD_XMPU_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR05End
+ */
+#define XFPD_XMPU_CFG_R05_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000154UL )
+#define XFPD_XMPU_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R05_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R05_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR05Mstr
+ */
+#define XFPD_XMPU_CFG_R05_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000158UL )
+#define XFPD_XMPU_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR05
+ */
+#define XFPD_XMPU_CFG_R05    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000015CUL )
+#define XFPD_XMPU_CFG_R05_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R05_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R05_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R05_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R05_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R05_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R05_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R05_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R05_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R05_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR06Strt
+ */
+#define XFPD_XMPU_CFG_R06_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000160UL )
+#define XFPD_XMPU_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR06End
+ */
+#define XFPD_XMPU_CFG_R06_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000164UL )
+#define XFPD_XMPU_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R06_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R06_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR06Mstr
+ */
+#define XFPD_XMPU_CFG_R06_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000168UL )
+#define XFPD_XMPU_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR06
+ */
+#define XFPD_XMPU_CFG_R06    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000016CUL )
+#define XFPD_XMPU_CFG_R06_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R06_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R06_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R06_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R06_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R06_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R06_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R06_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R06_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R06_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR07Strt
+ */
+#define XFPD_XMPU_CFG_R07_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000170UL )
+#define XFPD_XMPU_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR07End
+ */
+#define XFPD_XMPU_CFG_R07_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000174UL )
+#define XFPD_XMPU_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R07_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R07_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR07Mstr
+ */
+#define XFPD_XMPU_CFG_R07_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000178UL )
+#define XFPD_XMPU_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR07
+ */
+#define XFPD_XMPU_CFG_R07    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000017CUL )
+#define XFPD_XMPU_CFG_R07_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R07_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R07_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R07_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R07_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R07_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R07_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R07_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R07_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R07_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR08Strt
+ */
+#define XFPD_XMPU_CFG_R08_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000180UL )
+#define XFPD_XMPU_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR08End
+ */
+#define XFPD_XMPU_CFG_R08_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000184UL )
+#define XFPD_XMPU_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R08_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R08_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR08Mstr
+ */
+#define XFPD_XMPU_CFG_R08_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000188UL )
+#define XFPD_XMPU_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR08
+ */
+#define XFPD_XMPU_CFG_R08    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000018CUL )
+#define XFPD_XMPU_CFG_R08_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R08_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R08_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R08_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R08_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R08_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R08_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R08_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R08_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R08_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR09Strt
+ */
+#define XFPD_XMPU_CFG_R09_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000190UL )
+#define XFPD_XMPU_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR09End
+ */
+#define XFPD_XMPU_CFG_R09_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000194UL )
+#define XFPD_XMPU_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R09_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R09_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR09Mstr
+ */
+#define XFPD_XMPU_CFG_R09_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x00000198UL )
+#define XFPD_XMPU_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR09
+ */
+#define XFPD_XMPU_CFG_R09    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x0000019CUL )
+#define XFPD_XMPU_CFG_R09_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R09_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R09_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R09_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R09_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R09_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R09_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R09_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R09_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R09_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR10Strt
+ */
+#define XFPD_XMPU_CFG_R10_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001A0UL )
+#define XFPD_XMPU_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR10End
+ */
+#define XFPD_XMPU_CFG_R10_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001A4UL )
+#define XFPD_XMPU_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R10_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R10_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR10Mstr
+ */
+#define XFPD_XMPU_CFG_R10_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001A8UL )
+#define XFPD_XMPU_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR10
+ */
+#define XFPD_XMPU_CFG_R10    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001ACUL )
+#define XFPD_XMPU_CFG_R10_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R10_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R10_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R10_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R10_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R10_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R10_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R10_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R10_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R10_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR11Strt
+ */
+#define XFPD_XMPU_CFG_R11_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001B0UL )
+#define XFPD_XMPU_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR11End
+ */
+#define XFPD_XMPU_CFG_R11_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001B4UL )
+#define XFPD_XMPU_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R11_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R11_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR11Mstr
+ */
+#define XFPD_XMPU_CFG_R11_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001B8UL )
+#define XFPD_XMPU_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR11
+ */
+#define XFPD_XMPU_CFG_R11    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001BCUL )
+#define XFPD_XMPU_CFG_R11_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R11_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R11_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R11_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R11_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R11_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R11_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R11_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R11_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R11_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR12Strt
+ */
+#define XFPD_XMPU_CFG_R12_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001C0UL )
+#define XFPD_XMPU_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR12End
+ */
+#define XFPD_XMPU_CFG_R12_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001C4UL )
+#define XFPD_XMPU_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R12_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R12_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR12Mstr
+ */
+#define XFPD_XMPU_CFG_R12_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001C8UL )
+#define XFPD_XMPU_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR12
+ */
+#define XFPD_XMPU_CFG_R12    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001CCUL )
+#define XFPD_XMPU_CFG_R12_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R12_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R12_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R12_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R12_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R12_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R12_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R12_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R12_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R12_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR13Strt
+ */
+#define XFPD_XMPU_CFG_R13_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001D0UL )
+#define XFPD_XMPU_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR13End
+ */
+#define XFPD_XMPU_CFG_R13_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001D4UL )
+#define XFPD_XMPU_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R13_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R13_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR13Mstr
+ */
+#define XFPD_XMPU_CFG_R13_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001D8UL )
+#define XFPD_XMPU_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR13
+ */
+#define XFPD_XMPU_CFG_R13    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001DCUL )
+#define XFPD_XMPU_CFG_R13_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R13_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R13_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R13_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R13_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R13_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R13_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R13_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R13_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R13_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR14Strt
+ */
+#define XFPD_XMPU_CFG_R14_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001E0UL )
+#define XFPD_XMPU_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR14End
+ */
+#define XFPD_XMPU_CFG_R14_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001E4UL )
+#define XFPD_XMPU_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R14_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R14_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR14Mstr
+ */
+#define XFPD_XMPU_CFG_R14_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001E8UL )
+#define XFPD_XMPU_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR14
+ */
+#define XFPD_XMPU_CFG_R14    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001ECUL )
+#define XFPD_XMPU_CFG_R14_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R14_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R14_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R14_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R14_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R14_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R14_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R14_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R14_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R14_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR15Strt
+ */
+#define XFPD_XMPU_CFG_R15_STRT    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001F0UL )
+#define XFPD_XMPU_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR15End
+ */
+#define XFPD_XMPU_CFG_R15_END    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001F4UL )
+#define XFPD_XMPU_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R15_END_ADDR_SHIFT   0UL
+#define XFPD_XMPU_CFG_R15_END_ADDR_WIDTH   28UL
+#define XFPD_XMPU_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XFPD_XMPU_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR15Mstr
+ */
+#define XFPD_XMPU_CFG_R15_MSTR    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001F8UL )
+#define XFPD_XMPU_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XFPD_XMPU_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XFPD_XMPU_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XFPD_XMPU_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XFPD_XMPU_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XFPD_XMPU_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XFPD_XMPU_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuCfgR15
+ */
+#define XFPD_XMPU_CFG_R15    ( ( XFPD_XMPU_CFG_BASEADDR ) + 0x000001FCUL )
+#define XFPD_XMPU_CFG_R15_RSTVAL   0x00000008UL
+
+#define XFPD_XMPU_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XFPD_XMPU_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XFPD_XMPU_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XFPD_XMPU_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R15_REGNNS_SHIFT   3UL
+#define XFPD_XMPU_CFG_R15_REGNNS_WIDTH   1UL
+#define XFPD_XMPU_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XFPD_XMPU_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XFPD_XMPU_CFG_R15_WRALWD_SHIFT   2UL
+#define XFPD_XMPU_CFG_R15_WRALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XFPD_XMPU_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R15_RDALWD_SHIFT   1UL
+#define XFPD_XMPU_CFG_R15_RDALWD_WIDTH   1UL
+#define XFPD_XMPU_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XFPD_XMPU_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XFPD_XMPU_CFG_R15_EN_SHIFT   0UL
+#define XFPD_XMPU_CFG_R15_EN_WIDTH   1UL
+#define XFPD_XMPU_CFG_R15_EN_MASK    0x00000001UL
+#define XFPD_XMPU_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XFPD_XMPU_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_xmpu_sink.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_xmpu_sink.h
new file mode 100644
index 000000000..39172f1f4
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xfpd_xmpu_sink.h
@@ -0,0 +1,81 @@
+/* ### HEADER ### */
+
+#ifndef __XFPD_XMPU_SINK_H__
+#define __XFPD_XMPU_SINK_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XfpdXmpuSink Base Address
+ */
+#define XFPD_XMPU_SINK_BASEADDR      0xFD4F0000UL
+
+/**
+ * Register: XfpdXmpuSinkErrSts
+ */
+#define XFPD_XMPU_SINK_ERR_STS    ( ( XFPD_XMPU_SINK_BASEADDR ) + 0x0000FF00UL )
+#define XFPD_XMPU_SINK_ERR_STS_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_SINK_ERR_STS_RDWR_SHIFT   31UL
+#define XFPD_XMPU_SINK_ERR_STS_RDWR_WIDTH   1UL
+#define XFPD_XMPU_SINK_ERR_STS_RDWR_MASK    0x80000000UL
+#define XFPD_XMPU_SINK_ERR_STS_RDWR_DEFVAL  0x0UL
+
+#define XFPD_XMPU_SINK_ERR_STS_ADDR_SHIFT   0UL
+#define XFPD_XMPU_SINK_ERR_STS_ADDR_WIDTH   12UL
+#define XFPD_XMPU_SINK_ERR_STS_ADDR_MASK    0x00000fffUL
+#define XFPD_XMPU_SINK_ERR_STS_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuSinkIsr
+ */
+#define XFPD_XMPU_SINK_ISR    ( ( XFPD_XMPU_SINK_BASEADDR ) + 0x0000FF10UL )
+#define XFPD_XMPU_SINK_ISR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_SINK_ISRADDRDECDERR_SHIFT   0UL
+#define XFPD_XMPU_SINK_ISRADDRDECDERR_WIDTH   1UL
+#define XFPD_XMPU_SINK_ISRADDRDECDERR_MASK    0x00000001UL
+#define XFPD_XMPU_SINK_ISRADDRDECDERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuSinkImr
+ */
+#define XFPD_XMPU_SINK_IMR    ( ( XFPD_XMPU_SINK_BASEADDR ) + 0x0000FF14UL )
+#define XFPD_XMPU_SINK_IMR_RSTVAL   0x00000001UL
+
+#define XFPD_XMPU_SINK_IMRADDRDECDERR_SHIFT   0UL
+#define XFPD_XMPU_SINK_IMRADDRDECDERR_WIDTH   1UL
+#define XFPD_XMPU_SINK_IMRADDRDECDERR_MASK    0x00000001UL
+#define XFPD_XMPU_SINK_IMRADDRDECDERR_DEFVAL  0x1UL
+
+/**
+ * Register: XfpdXmpuSinkIer
+ */
+#define XFPD_XMPU_SINK_IER    ( ( XFPD_XMPU_SINK_BASEADDR ) + 0x0000FF18UL )
+#define XFPD_XMPU_SINK_IER_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_SINK_IERADDRDECDERR_SHIFT   0UL
+#define XFPD_XMPU_SINK_IERADDRDECDERR_WIDTH   1UL
+#define XFPD_XMPU_SINK_IERADDRDECDERR_MASK    0x00000001UL
+#define XFPD_XMPU_SINK_IERADDRDECDERR_DEFVAL  0x0UL
+
+/**
+ * Register: XfpdXmpuSinkIdr
+ */
+#define XFPD_XMPU_SINK_IDR    ( ( XFPD_XMPU_SINK_BASEADDR ) + 0x0000FF1CUL )
+#define XFPD_XMPU_SINK_IDR_RSTVAL   0x00000000UL
+
+#define XFPD_XMPU_SINK_IDRADDRDECDERR_SHIFT   0UL
+#define XFPD_XMPU_SINK_IDRADDRDECDERR_WIDTH   1UL
+#define XFPD_XMPU_SINK_IDRADDRDECDERR_MASK    0x00000001UL
+#define XFPD_XMPU_SINK_IDRADDRDECDERR_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XFPD_XMPU_SINK_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xiou_secure_slcr.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xiou_secure_slcr.h
new file mode 100644
index 000000000..cb4ad4903
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xiou_secure_slcr.h
@@ -0,0 +1,174 @@
+/* ### HEADER ### */
+
+#ifndef __XIOU_SECURE_SLCR_H__
+#define __XIOU_SECURE_SLCR_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XiouSecureSlcr Base Address
+ */
+#define XIOU_SECURE_SLCR_BASEADDR      0xFF240000UL
+
+/**
+ * Register: XiouSecSlcrAxiWprtcn
+ */
+#define XIOU_SEC_SLCR_AXI_WPRTCN    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x00000000UL )
+#define XIOU_SEC_SLCR_AXI_WPRTCN_RSTVAL   0x00000000UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XQSPIPSAXI_AWPROT_SHIFT   25UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XQSPIPSAXI_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XQSPIPSAXI_AWPROT_MASK    0x0e000000UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XQSPIPSAXI_AWPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XNANDPS8_AWPROT_SHIFT   22UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XNANDPS8_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XNANDPS8_AWPROT_MASK    0x01c00000UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XNANDPS8_AWPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_SHIFT   19UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_MASK    0x00380000UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_SHIFT   16UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_MASK    0x00070000UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XSDPS_AWPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_SHIFT   9UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_MASK    0x00000e00UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_SHIFT   6UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_MASK    0x000001c0UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_SHIFT   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_MASK    0x00000038UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_SHIFT   0UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_MASK    0x00000007UL
+#define XIOU_SEC_SLCR_AXI_WPRTCN_XEMACPS_AWPROT_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSecSlcrAxiRprtcn
+ */
+#define XIOU_SEC_SLCR_AXI_RPRTCN    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x00000004UL )
+#define XIOU_SEC_SLCR_AXI_RPRTCN_RSTVAL   0x00000000UL
+
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XNANDPS8_ARPROT_SHIFT   22UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XNANDPS8_ARPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XNANDPS8_ARPROT_MASK    0x01c00000UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XNANDPS8_ARPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_SHIFT   19UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_MASK    0x00380000UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_SHIFT   16UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_MASK    0x00070000UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XSDPS_ARPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_SHIFT   9UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_MASK    0x00000e00UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_SHIFT   6UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_MASK    0x000001c0UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_SHIFT   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_MASK    0x00000038UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_DEFVAL  0x0UL
+
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_SHIFT   0UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_WIDTH   3UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_MASK    0x00000007UL
+#define XIOU_SEC_SLCR_AXI_RPRTCN_XEMACPS_ARPROT_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSecSlcrCtrl
+ */
+#define XIOU_SEC_SLCR_CTRL    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x00000040UL )
+#define XIOU_SEC_SLCR_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SEC_SLCR_CTRL_SLVERR_EN_SHIFT   0UL
+#define XIOU_SEC_SLCR_CTRL_SLVERR_EN_WIDTH   1UL
+#define XIOU_SEC_SLCR_CTRL_SLVERR_EN_MASK    0x00000001UL
+#define XIOU_SEC_SLCR_CTRL_SLVERR_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSecSlcrIsr
+ */
+#define XIOU_SEC_SLCR_ISR    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x00000044UL )
+#define XIOU_SEC_SLCR_ISR_RSTVAL   0x00000000UL
+
+#define XIOU_SEC_SLCR_ISR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SEC_SLCR_ISR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SEC_SLCR_ISR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SEC_SLCR_ISR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSecSlcrImr
+ */
+#define XIOU_SEC_SLCR_IMR    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x00000048UL )
+#define XIOU_SEC_SLCR_IMR_RSTVAL   0x00000001UL
+
+#define XIOU_SEC_SLCR_IMR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SEC_SLCR_IMR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SEC_SLCR_IMR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SEC_SLCR_IMR_ADDR_DECD_ERR_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSecSlcrIer
+ */
+#define XIOU_SEC_SLCR_IER    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x0000004CUL )
+#define XIOU_SEC_SLCR_IER_RSTVAL   0x00000000UL
+
+#define XIOU_SEC_SLCR_IER_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SEC_SLCR_IER_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SEC_SLCR_IER_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SEC_SLCR_IER_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSecSlcrIdr
+ */
+#define XIOU_SEC_SLCR_IDR    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x00000050UL )
+#define XIOU_SEC_SLCR_IDR_RSTVAL   0x00000000UL
+
+#define XIOU_SEC_SLCR_IDR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SEC_SLCR_IDR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SEC_SLCR_IDR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SEC_SLCR_IDR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSecSlcrItr
+ */
+#define XIOU_SEC_SLCR_ITR    ( ( XIOU_SECURE_SLCR_BASEADDR ) + 0x00000054UL )
+#define XIOU_SEC_SLCR_ITR_RSTVAL   0x00000000UL
+
+#define XIOU_SEC_SLCR_ITR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SEC_SLCR_ITR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SEC_SLCR_ITR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SEC_SLCR_ITR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XIOU_SECURE_SLCR_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xiou_slcr.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xiou_slcr.h
new file mode 100644
index 000000000..d81d178d3
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xiou_slcr.h
@@ -0,0 +1,4029 @@
+/* ### HEADER ### */
+
+#ifndef __XIOU_SLCR_H__
+#define __XIOU_SLCR_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XiouSlcr Base Address
+ */
+#define XIOU_SLCR_BASEADDR      0xFF180000UL
+
+/**
+ * Register: XiouSlcrMioPin0
+ */
+#define XIOU_SLCR_MIO_PIN_0    ( ( XIOU_SLCR_BASEADDR ) + 0x00000000UL )
+#define XIOU_SLCR_MIO_PIN_0_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_0_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_0_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_0_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_0_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_0_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_0_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_0_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_0_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_0_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_0_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_0_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_0_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin1
+ */
+#define XIOU_SLCR_MIO_PIN_1    ( ( XIOU_SLCR_BASEADDR ) + 0x00000004UL )
+#define XIOU_SLCR_MIO_PIN_1_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_1_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_1_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_1_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_1_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_1_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_1_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_1_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_1_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_1_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_1_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_1_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_1_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin2
+ */
+#define XIOU_SLCR_MIO_PIN_2    ( ( XIOU_SLCR_BASEADDR ) + 0x00000008UL )
+#define XIOU_SLCR_MIO_PIN_2_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_2_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_2_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_2_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_2_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_2_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_2_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_2_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_2_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_2_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_2_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_2_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_2_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin3
+ */
+#define XIOU_SLCR_MIO_PIN_3    ( ( XIOU_SLCR_BASEADDR ) + 0x0000000CUL )
+#define XIOU_SLCR_MIO_PIN_3_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_3_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_3_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_3_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_3_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_3_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_3_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_3_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_3_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_3_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_3_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_3_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_3_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin4
+ */
+#define XIOU_SLCR_MIO_PIN_4    ( ( XIOU_SLCR_BASEADDR ) + 0x00000010UL )
+#define XIOU_SLCR_MIO_PIN_4_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_4_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_4_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_4_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_4_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_4_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_4_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_4_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_4_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_4_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_4_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_4_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_4_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin5
+ */
+#define XIOU_SLCR_MIO_PIN_5    ( ( XIOU_SLCR_BASEADDR ) + 0x00000014UL )
+#define XIOU_SLCR_MIO_PIN_5_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_5_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_5_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_5_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_5_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_5_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_5_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_5_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_5_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_5_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_5_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_5_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_5_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin6
+ */
+#define XIOU_SLCR_MIO_PIN_6    ( ( XIOU_SLCR_BASEADDR ) + 0x00000018UL )
+#define XIOU_SLCR_MIO_PIN_6_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_6_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_6_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_6_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_6_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_6_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_6_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_6_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_6_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_6_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_6_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_6_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_6_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin7
+ */
+#define XIOU_SLCR_MIO_PIN_7    ( ( XIOU_SLCR_BASEADDR ) + 0x0000001CUL )
+#define XIOU_SLCR_MIO_PIN_7_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_7_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_7_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_7_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_7_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_7_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_7_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_7_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_7_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_7_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_7_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_7_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_7_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin8
+ */
+#define XIOU_SLCR_MIO_PIN_8    ( ( XIOU_SLCR_BASEADDR ) + 0x00000020UL )
+#define XIOU_SLCR_MIO_PIN_8_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_8_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_8_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_8_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_8_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_8_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_8_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_8_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_8_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_8_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_8_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_8_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_8_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin9
+ */
+#define XIOU_SLCR_MIO_PIN_9    ( ( XIOU_SLCR_BASEADDR ) + 0x00000024UL )
+#define XIOU_SLCR_MIO_PIN_9_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_9_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_9_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_9_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_9_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_9_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_9_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_9_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_9_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_9_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_9_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_9_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_9_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin10
+ */
+#define XIOU_SLCR_MIO_PIN_10    ( ( XIOU_SLCR_BASEADDR ) + 0x00000028UL )
+#define XIOU_SLCR_MIO_PIN_10_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_10_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_10_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_10_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_10_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_10_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_10_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_10_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_10_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_10_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_10_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_10_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_10_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin11
+ */
+#define XIOU_SLCR_MIO_PIN_11    ( ( XIOU_SLCR_BASEADDR ) + 0x0000002CUL )
+#define XIOU_SLCR_MIO_PIN_11_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_11_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_11_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_11_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_11_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_11_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_11_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_11_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_11_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_11_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_11_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_11_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_11_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin12
+ */
+#define XIOU_SLCR_MIO_PIN_12    ( ( XIOU_SLCR_BASEADDR ) + 0x00000030UL )
+#define XIOU_SLCR_MIO_PIN_12_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_12_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_12_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_12_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_12_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_12_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_12_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_12_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_12_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_12_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_12_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_12_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_12_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin13
+ */
+#define XIOU_SLCR_MIO_PIN_13    ( ( XIOU_SLCR_BASEADDR ) + 0x00000034UL )
+#define XIOU_SLCR_MIO_PIN_13_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_13_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_13_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_13_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_13_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_13_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_13_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_13_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_13_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_13_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_13_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_13_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_13_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin14
+ */
+#define XIOU_SLCR_MIO_PIN_14    ( ( XIOU_SLCR_BASEADDR ) + 0x00000038UL )
+#define XIOU_SLCR_MIO_PIN_14_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_14_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_14_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_14_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_14_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_14_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_14_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_14_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_14_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_14_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_14_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_14_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_14_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin15
+ */
+#define XIOU_SLCR_MIO_PIN_15    ( ( XIOU_SLCR_BASEADDR ) + 0x0000003CUL )
+#define XIOU_SLCR_MIO_PIN_15_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_15_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_15_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_15_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_15_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_15_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_15_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_15_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_15_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_15_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_15_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_15_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_15_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin16
+ */
+#define XIOU_SLCR_MIO_PIN_16    ( ( XIOU_SLCR_BASEADDR ) + 0x00000040UL )
+#define XIOU_SLCR_MIO_PIN_16_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_16_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_16_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_16_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_16_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_16_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_16_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_16_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_16_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_16_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_16_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_16_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_16_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin17
+ */
+#define XIOU_SLCR_MIO_PIN_17    ( ( XIOU_SLCR_BASEADDR ) + 0x00000044UL )
+#define XIOU_SLCR_MIO_PIN_17_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_17_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_17_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_17_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_17_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_17_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_17_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_17_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_17_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_17_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_17_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_17_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_17_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin18
+ */
+#define XIOU_SLCR_MIO_PIN_18    ( ( XIOU_SLCR_BASEADDR ) + 0x00000048UL )
+#define XIOU_SLCR_MIO_PIN_18_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_18_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_18_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_18_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_18_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_18_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_18_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_18_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_18_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_18_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_18_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_18_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_18_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin19
+ */
+#define XIOU_SLCR_MIO_PIN_19    ( ( XIOU_SLCR_BASEADDR ) + 0x0000004CUL )
+#define XIOU_SLCR_MIO_PIN_19_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_19_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_19_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_19_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_19_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_19_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_19_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_19_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_19_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_19_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_19_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_19_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_19_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin20
+ */
+#define XIOU_SLCR_MIO_PIN_20    ( ( XIOU_SLCR_BASEADDR ) + 0x00000050UL )
+#define XIOU_SLCR_MIO_PIN_20_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_20_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_20_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_20_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_20_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_20_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_20_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_20_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_20_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_20_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_20_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_20_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_20_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin21
+ */
+#define XIOU_SLCR_MIO_PIN_21    ( ( XIOU_SLCR_BASEADDR ) + 0x00000054UL )
+#define XIOU_SLCR_MIO_PIN_21_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_21_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_21_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_21_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_21_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_21_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_21_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_21_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_21_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_21_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_21_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_21_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_21_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin22
+ */
+#define XIOU_SLCR_MIO_PIN_22    ( ( XIOU_SLCR_BASEADDR ) + 0x00000058UL )
+#define XIOU_SLCR_MIO_PIN_22_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_22_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_22_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_22_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_22_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_22_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_22_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_22_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_22_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_22_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_22_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_22_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_22_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin23
+ */
+#define XIOU_SLCR_MIO_PIN_23    ( ( XIOU_SLCR_BASEADDR ) + 0x0000005CUL )
+#define XIOU_SLCR_MIO_PIN_23_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_23_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_23_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_23_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_23_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_23_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_23_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_23_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_23_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_23_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_23_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_23_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_23_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin24
+ */
+#define XIOU_SLCR_MIO_PIN_24    ( ( XIOU_SLCR_BASEADDR ) + 0x00000060UL )
+#define XIOU_SLCR_MIO_PIN_24_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_24_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_24_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_24_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_24_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_24_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_24_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_24_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_24_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_24_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_24_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_24_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_24_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin25
+ */
+#define XIOU_SLCR_MIO_PIN_25    ( ( XIOU_SLCR_BASEADDR ) + 0x00000064UL )
+#define XIOU_SLCR_MIO_PIN_25_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_25_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_25_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_25_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_25_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_25_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_25_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_25_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_25_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_25_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_25_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_25_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_25_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin26
+ */
+#define XIOU_SLCR_MIO_PIN_26    ( ( XIOU_SLCR_BASEADDR ) + 0x00000068UL )
+#define XIOU_SLCR_MIO_PIN_26_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_26_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_26_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_26_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_26_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_26_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_26_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_26_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_26_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_26_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_26_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_26_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_26_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin27
+ */
+#define XIOU_SLCR_MIO_PIN_27    ( ( XIOU_SLCR_BASEADDR ) + 0x0000006CUL )
+#define XIOU_SLCR_MIO_PIN_27_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_27_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_27_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_27_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_27_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_27_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_27_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_27_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_27_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_27_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_27_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_27_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_27_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin28
+ */
+#define XIOU_SLCR_MIO_PIN_28    ( ( XIOU_SLCR_BASEADDR ) + 0x00000070UL )
+#define XIOU_SLCR_MIO_PIN_28_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_28_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_28_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_28_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_28_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_28_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_28_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_28_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_28_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_28_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_28_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_28_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_28_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin29
+ */
+#define XIOU_SLCR_MIO_PIN_29    ( ( XIOU_SLCR_BASEADDR ) + 0x00000074UL )
+#define XIOU_SLCR_MIO_PIN_29_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_29_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_29_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_29_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_29_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_29_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_29_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_29_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_29_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_29_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_29_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_29_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_29_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin30
+ */
+#define XIOU_SLCR_MIO_PIN_30    ( ( XIOU_SLCR_BASEADDR ) + 0x00000078UL )
+#define XIOU_SLCR_MIO_PIN_30_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_30_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_30_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_30_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_30_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_30_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_30_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_30_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_30_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_30_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_30_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_30_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_30_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin31
+ */
+#define XIOU_SLCR_MIO_PIN_31    ( ( XIOU_SLCR_BASEADDR ) + 0x0000007CUL )
+#define XIOU_SLCR_MIO_PIN_31_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_31_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_31_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_31_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_31_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_31_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_31_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_31_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_31_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_31_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_31_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_31_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_31_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin32
+ */
+#define XIOU_SLCR_MIO_PIN_32    ( ( XIOU_SLCR_BASEADDR ) + 0x00000080UL )
+#define XIOU_SLCR_MIO_PIN_32_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_32_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_32_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_32_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_32_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_32_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_32_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_32_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_32_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_32_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_32_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_32_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_32_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin33
+ */
+#define XIOU_SLCR_MIO_PIN_33    ( ( XIOU_SLCR_BASEADDR ) + 0x00000084UL )
+#define XIOU_SLCR_MIO_PIN_33_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_33_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_33_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_33_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_33_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_33_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_33_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_33_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_33_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_33_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_33_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_33_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_33_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin34
+ */
+#define XIOU_SLCR_MIO_PIN_34    ( ( XIOU_SLCR_BASEADDR ) + 0x00000088UL )
+#define XIOU_SLCR_MIO_PIN_34_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_34_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_34_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_34_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_34_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_34_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_34_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_34_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_34_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_34_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_34_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_34_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_34_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin35
+ */
+#define XIOU_SLCR_MIO_PIN_35    ( ( XIOU_SLCR_BASEADDR ) + 0x0000008CUL )
+#define XIOU_SLCR_MIO_PIN_35_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_35_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_35_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_35_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_35_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_35_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_35_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_35_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_35_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_35_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_35_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_35_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_35_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin36
+ */
+#define XIOU_SLCR_MIO_PIN_36    ( ( XIOU_SLCR_BASEADDR ) + 0x00000090UL )
+#define XIOU_SLCR_MIO_PIN_36_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_36_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_36_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_36_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_36_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_36_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_36_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_36_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_36_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_36_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_36_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_36_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_36_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin37
+ */
+#define XIOU_SLCR_MIO_PIN_37    ( ( XIOU_SLCR_BASEADDR ) + 0x00000094UL )
+#define XIOU_SLCR_MIO_PIN_37_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_37_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_37_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_37_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_37_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_37_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_37_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_37_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_37_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_37_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_37_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_37_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_37_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin38
+ */
+#define XIOU_SLCR_MIO_PIN_38    ( ( XIOU_SLCR_BASEADDR ) + 0x00000098UL )
+#define XIOU_SLCR_MIO_PIN_38_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_38_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_38_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_38_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_38_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_38_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_38_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_38_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_38_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_38_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_38_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_38_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_38_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin39
+ */
+#define XIOU_SLCR_MIO_PIN_39    ( ( XIOU_SLCR_BASEADDR ) + 0x0000009CUL )
+#define XIOU_SLCR_MIO_PIN_39_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_39_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_39_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_39_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_39_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_39_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_39_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_39_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_39_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_39_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_39_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_39_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_39_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin40
+ */
+#define XIOU_SLCR_MIO_PIN_40    ( ( XIOU_SLCR_BASEADDR ) + 0x000000A0UL )
+#define XIOU_SLCR_MIO_PIN_40_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_40_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_40_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_40_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_40_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_40_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_40_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_40_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_40_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_40_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_40_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_40_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_40_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin41
+ */
+#define XIOU_SLCR_MIO_PIN_41    ( ( XIOU_SLCR_BASEADDR ) + 0x000000A4UL )
+#define XIOU_SLCR_MIO_PIN_41_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_41_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_41_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_41_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_41_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_41_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_41_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_41_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_41_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_41_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_41_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_41_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_41_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin42
+ */
+#define XIOU_SLCR_MIO_PIN_42    ( ( XIOU_SLCR_BASEADDR ) + 0x000000A8UL )
+#define XIOU_SLCR_MIO_PIN_42_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_42_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_42_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_42_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_42_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_42_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_42_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_42_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_42_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_42_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_42_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_42_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_42_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin43
+ */
+#define XIOU_SLCR_MIO_PIN_43    ( ( XIOU_SLCR_BASEADDR ) + 0x000000ACUL )
+#define XIOU_SLCR_MIO_PIN_43_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_43_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_43_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_43_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_43_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_43_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_43_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_43_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_43_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_43_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_43_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_43_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_43_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin44
+ */
+#define XIOU_SLCR_MIO_PIN_44    ( ( XIOU_SLCR_BASEADDR ) + 0x000000B0UL )
+#define XIOU_SLCR_MIO_PIN_44_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_44_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_44_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_44_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_44_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_44_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_44_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_44_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_44_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_44_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_44_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_44_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_44_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin45
+ */
+#define XIOU_SLCR_MIO_PIN_45    ( ( XIOU_SLCR_BASEADDR ) + 0x000000B4UL )
+#define XIOU_SLCR_MIO_PIN_45_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_45_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_45_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_45_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_45_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_45_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_45_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_45_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_45_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_45_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_45_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_45_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_45_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin46
+ */
+#define XIOU_SLCR_MIO_PIN_46    ( ( XIOU_SLCR_BASEADDR ) + 0x000000B8UL )
+#define XIOU_SLCR_MIO_PIN_46_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_46_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_46_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_46_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_46_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_46_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_46_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_46_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_46_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_46_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_46_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_46_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_46_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin47
+ */
+#define XIOU_SLCR_MIO_PIN_47    ( ( XIOU_SLCR_BASEADDR ) + 0x000000BCUL )
+#define XIOU_SLCR_MIO_PIN_47_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_47_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_47_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_47_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_47_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_47_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_47_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_47_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_47_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_47_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_47_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_47_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_47_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin48
+ */
+#define XIOU_SLCR_MIO_PIN_48    ( ( XIOU_SLCR_BASEADDR ) + 0x000000C0UL )
+#define XIOU_SLCR_MIO_PIN_48_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_48_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_48_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_48_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_48_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_48_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_48_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_48_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_48_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_48_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_48_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_48_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_48_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin49
+ */
+#define XIOU_SLCR_MIO_PIN_49    ( ( XIOU_SLCR_BASEADDR ) + 0x000000C4UL )
+#define XIOU_SLCR_MIO_PIN_49_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_49_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_49_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_49_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_49_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_49_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_49_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_49_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_49_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_49_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_49_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_49_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_49_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin50
+ */
+#define XIOU_SLCR_MIO_PIN_50    ( ( XIOU_SLCR_BASEADDR ) + 0x000000C8UL )
+#define XIOU_SLCR_MIO_PIN_50_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_50_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_50_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_50_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_50_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_50_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_50_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_50_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_50_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_50_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_50_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_50_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_50_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin51
+ */
+#define XIOU_SLCR_MIO_PIN_51    ( ( XIOU_SLCR_BASEADDR ) + 0x000000CCUL )
+#define XIOU_SLCR_MIO_PIN_51_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_51_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_51_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_51_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_51_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_51_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_51_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_51_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_51_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_51_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_51_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_51_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_51_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin52
+ */
+#define XIOU_SLCR_MIO_PIN_52    ( ( XIOU_SLCR_BASEADDR ) + 0x000000D0UL )
+#define XIOU_SLCR_MIO_PIN_52_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_52_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_52_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_52_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_52_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_52_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_52_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_52_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_52_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_52_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_52_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_52_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_52_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin53
+ */
+#define XIOU_SLCR_MIO_PIN_53    ( ( XIOU_SLCR_BASEADDR ) + 0x000000D4UL )
+#define XIOU_SLCR_MIO_PIN_53_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_53_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_53_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_53_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_53_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_53_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_53_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_53_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_53_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_53_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_53_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_53_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_53_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin54
+ */
+#define XIOU_SLCR_MIO_PIN_54    ( ( XIOU_SLCR_BASEADDR ) + 0x000000D8UL )
+#define XIOU_SLCR_MIO_PIN_54_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_54_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_54_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_54_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_54_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_54_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_54_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_54_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_54_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_54_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_54_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_54_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_54_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin55
+ */
+#define XIOU_SLCR_MIO_PIN_55    ( ( XIOU_SLCR_BASEADDR ) + 0x000000DCUL )
+#define XIOU_SLCR_MIO_PIN_55_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_55_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_55_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_55_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_55_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_55_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_55_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_55_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_55_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_55_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_55_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_55_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_55_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin56
+ */
+#define XIOU_SLCR_MIO_PIN_56    ( ( XIOU_SLCR_BASEADDR ) + 0x000000E0UL )
+#define XIOU_SLCR_MIO_PIN_56_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_56_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_56_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_56_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_56_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_56_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_56_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_56_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_56_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_56_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_56_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_56_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_56_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin57
+ */
+#define XIOU_SLCR_MIO_PIN_57    ( ( XIOU_SLCR_BASEADDR ) + 0x000000E4UL )
+#define XIOU_SLCR_MIO_PIN_57_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_57_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_57_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_57_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_57_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_57_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_57_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_57_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_57_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_57_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_57_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_57_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_57_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin58
+ */
+#define XIOU_SLCR_MIO_PIN_58    ( ( XIOU_SLCR_BASEADDR ) + 0x000000E8UL )
+#define XIOU_SLCR_MIO_PIN_58_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_58_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_58_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_58_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_58_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_58_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_58_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_58_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_58_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_58_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_58_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_58_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_58_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin59
+ */
+#define XIOU_SLCR_MIO_PIN_59    ( ( XIOU_SLCR_BASEADDR ) + 0x000000ECUL )
+#define XIOU_SLCR_MIO_PIN_59_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_59_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_59_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_59_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_59_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_59_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_59_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_59_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_59_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_59_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_59_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_59_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_59_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin60
+ */
+#define XIOU_SLCR_MIO_PIN_60    ( ( XIOU_SLCR_BASEADDR ) + 0x000000F0UL )
+#define XIOU_SLCR_MIO_PIN_60_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_60_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_60_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_60_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_60_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_60_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_60_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_60_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_60_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_60_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_60_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_60_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_60_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin61
+ */
+#define XIOU_SLCR_MIO_PIN_61    ( ( XIOU_SLCR_BASEADDR ) + 0x000000F4UL )
+#define XIOU_SLCR_MIO_PIN_61_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_61_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_61_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_61_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_61_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_61_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_61_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_61_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_61_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_61_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_61_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_61_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_61_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin62
+ */
+#define XIOU_SLCR_MIO_PIN_62    ( ( XIOU_SLCR_BASEADDR ) + 0x000000F8UL )
+#define XIOU_SLCR_MIO_PIN_62_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_62_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_62_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_62_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_62_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_62_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_62_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_62_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_62_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_62_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_62_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_62_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_62_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin63
+ */
+#define XIOU_SLCR_MIO_PIN_63    ( ( XIOU_SLCR_BASEADDR ) + 0x000000FCUL )
+#define XIOU_SLCR_MIO_PIN_63_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_63_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_63_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_63_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_63_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_63_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_63_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_63_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_63_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_63_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_63_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_63_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_63_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin64
+ */
+#define XIOU_SLCR_MIO_PIN_64    ( ( XIOU_SLCR_BASEADDR ) + 0x00000100UL )
+#define XIOU_SLCR_MIO_PIN_64_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_64_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_64_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_64_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_64_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_64_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_64_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_64_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_64_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_64_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_64_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_64_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_64_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin65
+ */
+#define XIOU_SLCR_MIO_PIN_65    ( ( XIOU_SLCR_BASEADDR ) + 0x00000104UL )
+#define XIOU_SLCR_MIO_PIN_65_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_65_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_65_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_65_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_65_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_65_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_65_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_65_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_65_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_65_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_65_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_65_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_65_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin66
+ */
+#define XIOU_SLCR_MIO_PIN_66    ( ( XIOU_SLCR_BASEADDR ) + 0x00000108UL )
+#define XIOU_SLCR_MIO_PIN_66_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_66_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_66_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_66_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_66_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_66_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_66_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_66_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_66_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_66_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_66_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_66_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_66_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin67
+ */
+#define XIOU_SLCR_MIO_PIN_67    ( ( XIOU_SLCR_BASEADDR ) + 0x0000010CUL )
+#define XIOU_SLCR_MIO_PIN_67_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_67_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_67_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_67_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_67_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_67_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_67_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_67_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_67_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_67_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_67_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_67_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_67_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin68
+ */
+#define XIOU_SLCR_MIO_PIN_68    ( ( XIOU_SLCR_BASEADDR ) + 0x00000110UL )
+#define XIOU_SLCR_MIO_PIN_68_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_68_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_68_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_68_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_68_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_68_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_68_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_68_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_68_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_68_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_68_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_68_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_68_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin69
+ */
+#define XIOU_SLCR_MIO_PIN_69    ( ( XIOU_SLCR_BASEADDR ) + 0x00000114UL )
+#define XIOU_SLCR_MIO_PIN_69_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_69_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_69_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_69_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_69_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_69_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_69_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_69_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_69_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_69_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_69_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_69_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_69_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin70
+ */
+#define XIOU_SLCR_MIO_PIN_70    ( ( XIOU_SLCR_BASEADDR ) + 0x00000118UL )
+#define XIOU_SLCR_MIO_PIN_70_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_70_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_70_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_70_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_70_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_70_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_70_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_70_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_70_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_70_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_70_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_70_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_70_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin71
+ */
+#define XIOU_SLCR_MIO_PIN_71    ( ( XIOU_SLCR_BASEADDR ) + 0x0000011CUL )
+#define XIOU_SLCR_MIO_PIN_71_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_71_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_71_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_71_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_71_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_71_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_71_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_71_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_71_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_71_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_71_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_71_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_71_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin72
+ */
+#define XIOU_SLCR_MIO_PIN_72    ( ( XIOU_SLCR_BASEADDR ) + 0x00000120UL )
+#define XIOU_SLCR_MIO_PIN_72_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_72_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_72_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_72_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_72_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_72_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_72_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_72_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_72_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_72_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_72_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_72_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_72_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin73
+ */
+#define XIOU_SLCR_MIO_PIN_73    ( ( XIOU_SLCR_BASEADDR ) + 0x00000124UL )
+#define XIOU_SLCR_MIO_PIN_73_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_73_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_73_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_73_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_73_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_73_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_73_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_73_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_73_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_73_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_73_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_73_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_73_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin74
+ */
+#define XIOU_SLCR_MIO_PIN_74    ( ( XIOU_SLCR_BASEADDR ) + 0x00000128UL )
+#define XIOU_SLCR_MIO_PIN_74_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_74_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_74_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_74_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_74_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_74_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_74_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_74_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_74_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_74_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_74_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_74_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_74_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin75
+ */
+#define XIOU_SLCR_MIO_PIN_75    ( ( XIOU_SLCR_BASEADDR ) + 0x0000012CUL )
+#define XIOU_SLCR_MIO_PIN_75_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_75_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_75_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_75_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_75_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_75_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_75_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_75_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_75_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_75_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_75_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_75_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_75_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin76
+ */
+#define XIOU_SLCR_MIO_PIN_76    ( ( XIOU_SLCR_BASEADDR ) + 0x00000130UL )
+#define XIOU_SLCR_MIO_PIN_76_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_76_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_76_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_76_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_76_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_76_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_76_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_76_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_76_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_76_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_76_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_76_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_76_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioPin77
+ */
+#define XIOU_SLCR_MIO_PIN_77    ( ( XIOU_SLCR_BASEADDR ) + 0x00000134UL )
+#define XIOU_SLCR_MIO_PIN_77_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT   5UL
+#define XIOU_SLCR_MIO_PIN_77_L3_SEL_WIDTH   3UL
+#define XIOU_SLCR_MIO_PIN_77_L3_SEL_MASK    0x000000e0UL
+#define XIOU_SLCR_MIO_PIN_77_L3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT   3UL
+#define XIOU_SLCR_MIO_PIN_77_L2_SEL_WIDTH   2UL
+#define XIOU_SLCR_MIO_PIN_77_L2_SEL_MASK    0x00000018UL
+#define XIOU_SLCR_MIO_PIN_77_L2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT   2UL
+#define XIOU_SLCR_MIO_PIN_77_L1_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_77_L1_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_PIN_77_L1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT   1UL
+#define XIOU_SLCR_MIO_PIN_77_L0_SEL_WIDTH   1UL
+#define XIOU_SLCR_MIO_PIN_77_L0_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_PIN_77_L0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank0Ctrl0
+ */
+#define XIOU_SLCR_BANK0_CTRL0    ( ( XIOU_SLCR_BASEADDR ) + 0x00000138UL )
+#define XIOU_SLCR_BANK0_CTRL0_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK0_CTRL0_DRIVE0_SHIFT   0UL
+#define XIOU_SLCR_BANK0_CTRL0_DRIVE0_WIDTH   26UL
+#define XIOU_SLCR_BANK0_CTRL0_DRIVE0_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK0_CTRL0_DRIVE0_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank0Ctrl1
+ */
+#define XIOU_SLCR_BANK0_CTRL1    ( ( XIOU_SLCR_BASEADDR ) + 0x0000013CUL )
+#define XIOU_SLCR_BANK0_CTRL1_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK0_CTRL1_DRIVE1_SHIFT   0UL
+#define XIOU_SLCR_BANK0_CTRL1_DRIVE1_WIDTH   26UL
+#define XIOU_SLCR_BANK0_CTRL1_DRIVE1_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK0_CTRL1_DRIVE1_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank0Ctrl3
+ */
+#define XIOU_SLCR_BANK0_CTRL3    ( ( XIOU_SLCR_BASEADDR ) + 0x00000140UL )
+#define XIOU_SLCR_BANK0_CTRL3_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_SHIFT   0UL
+#define XIOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_WIDTH   26UL
+#define XIOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank0Ctrl4
+ */
+#define XIOU_SLCR_BANK0_CTRL4    ( ( XIOU_SLCR_BASEADDR ) + 0x00000144UL )
+#define XIOU_SLCR_BANK0_CTRL4_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK0_CTRL4_PULLHILO_N_SHIFT   0UL
+#define XIOU_SLCR_BANK0_CTRL4_PULLHILO_N_WIDTH   26UL
+#define XIOU_SLCR_BANK0_CTRL4_PULLHILO_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK0_CTRL4_PULLHILO_N_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank0Ctrl5
+ */
+#define XIOU_SLCR_BANK0_CTRL5    ( ( XIOU_SLCR_BASEADDR ) + 0x00000148UL )
+#define XIOU_SLCR_BANK0_CTRL5_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK0_CTRL5_PULL_EN_SHIFT   0UL
+#define XIOU_SLCR_BANK0_CTRL5_PULL_EN_WIDTH   26UL
+#define XIOU_SLCR_BANK0_CTRL5_PULL_EN_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK0_CTRL5_PULL_EN_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank0Ctrl6
+ */
+#define XIOU_SLCR_BANK0_CTRL6    ( ( XIOU_SLCR_BASEADDR ) + 0x0000014CUL )
+#define XIOU_SLCR_BANK0_CTRL6_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_SHIFT   0UL
+#define XIOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_WIDTH   26UL
+#define XIOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank0Sts
+ */
+#define XIOU_SLCR_BANK0_STS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000150UL )
+#define XIOU_SLCR_BANK0_STS_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK0_STS_VOLTAGE_MODE_SHIFT   0UL
+#define XIOU_SLCR_BANK0_STS_VOLTAGE_MODE_WIDTH   1UL
+#define XIOU_SLCR_BANK0_STS_VOLTAGE_MODE_MASK    0x00000001UL
+#define XIOU_SLCR_BANK0_STS_VOLTAGE_MODE_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank1Ctrl0
+ */
+#define XIOU_SLCR_BANK1_CTRL0    ( ( XIOU_SLCR_BASEADDR ) + 0x00000154UL )
+#define XIOU_SLCR_BANK1_CTRL0_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK1_CTRL0_DRIVE0_SHIFT   0UL
+#define XIOU_SLCR_BANK1_CTRL0_DRIVE0_WIDTH   26UL
+#define XIOU_SLCR_BANK1_CTRL0_DRIVE0_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK1_CTRL0_DRIVE0_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank1Ctrl1
+ */
+#define XIOU_SLCR_BANK1_CTRL1    ( ( XIOU_SLCR_BASEADDR ) + 0x00000158UL )
+#define XIOU_SLCR_BANK1_CTRL1_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK1_CTRL1_DRIVE1_SHIFT   0UL
+#define XIOU_SLCR_BANK1_CTRL1_DRIVE1_WIDTH   26UL
+#define XIOU_SLCR_BANK1_CTRL1_DRIVE1_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK1_CTRL1_DRIVE1_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank1Ctrl3
+ */
+#define XIOU_SLCR_BANK1_CTRL3    ( ( XIOU_SLCR_BASEADDR ) + 0x0000015CUL )
+#define XIOU_SLCR_BANK1_CTRL3_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_SHIFT   0UL
+#define XIOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_WIDTH   26UL
+#define XIOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank1Ctrl4
+ */
+#define XIOU_SLCR_BANK1_CTRL4    ( ( XIOU_SLCR_BASEADDR ) + 0x00000160UL )
+#define XIOU_SLCR_BANK1_CTRL4_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK1_CTRL4_PULLHILO_N_SHIFT   0UL
+#define XIOU_SLCR_BANK1_CTRL4_PULLHILO_N_WIDTH   26UL
+#define XIOU_SLCR_BANK1_CTRL4_PULLHILO_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK1_CTRL4_PULLHILO_N_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank1Ctrl5
+ */
+#define XIOU_SLCR_BANK1_CTRL5    ( ( XIOU_SLCR_BASEADDR ) + 0x00000164UL )
+#define XIOU_SLCR_BANK1_CTRL5_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK1_CTRL5_PULL_EN_SHIFT   0UL
+#define XIOU_SLCR_BANK1_CTRL5_PULL_EN_WIDTH   26UL
+#define XIOU_SLCR_BANK1_CTRL5_PULL_EN_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK1_CTRL5_PULL_EN_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank1Ctrl6
+ */
+#define XIOU_SLCR_BANK1_CTRL6    ( ( XIOU_SLCR_BASEADDR ) + 0x00000168UL )
+#define XIOU_SLCR_BANK1_CTRL6_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_SHIFT   0UL
+#define XIOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_WIDTH   26UL
+#define XIOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank1Sts
+ */
+#define XIOU_SLCR_BANK1_STS    ( ( XIOU_SLCR_BASEADDR ) + 0x0000016CUL )
+#define XIOU_SLCR_BANK1_STS_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK1_STS_VOLTAGE_MODE_SHIFT   0UL
+#define XIOU_SLCR_BANK1_STS_VOLTAGE_MODE_WIDTH   1UL
+#define XIOU_SLCR_BANK1_STS_VOLTAGE_MODE_MASK    0x00000001UL
+#define XIOU_SLCR_BANK1_STS_VOLTAGE_MODE_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank2Ctrl0
+ */
+#define XIOU_SLCR_BANK2_CTRL0    ( ( XIOU_SLCR_BASEADDR ) + 0x00000170UL )
+#define XIOU_SLCR_BANK2_CTRL0_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK2_CTRL0_DRIVE0_SHIFT   0UL
+#define XIOU_SLCR_BANK2_CTRL0_DRIVE0_WIDTH   26UL
+#define XIOU_SLCR_BANK2_CTRL0_DRIVE0_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK2_CTRL0_DRIVE0_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank2Ctrl1
+ */
+#define XIOU_SLCR_BANK2_CTRL1    ( ( XIOU_SLCR_BASEADDR ) + 0x00000174UL )
+#define XIOU_SLCR_BANK2_CTRL1_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK2_CTRL1_DRIVE1_SHIFT   0UL
+#define XIOU_SLCR_BANK2_CTRL1_DRIVE1_WIDTH   26UL
+#define XIOU_SLCR_BANK2_CTRL1_DRIVE1_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK2_CTRL1_DRIVE1_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank2Ctrl3
+ */
+#define XIOU_SLCR_BANK2_CTRL3    ( ( XIOU_SLCR_BASEADDR ) + 0x00000178UL )
+#define XIOU_SLCR_BANK2_CTRL3_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_SHIFT   0UL
+#define XIOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_WIDTH   26UL
+#define XIOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank2Ctrl4
+ */
+#define XIOU_SLCR_BANK2_CTRL4    ( ( XIOU_SLCR_BASEADDR ) + 0x0000017CUL )
+#define XIOU_SLCR_BANK2_CTRL4_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK2_CTRL4_PULLHILO_N_SHIFT   0UL
+#define XIOU_SLCR_BANK2_CTRL4_PULLHILO_N_WIDTH   26UL
+#define XIOU_SLCR_BANK2_CTRL4_PULLHILO_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK2_CTRL4_PULLHILO_N_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank2Ctrl5
+ */
+#define XIOU_SLCR_BANK2_CTRL5    ( ( XIOU_SLCR_BASEADDR ) + 0x00000180UL )
+#define XIOU_SLCR_BANK2_CTRL5_RSTVAL   0x03ffffffUL
+
+#define XIOU_SLCR_BANK2_CTRL5_PULL_EN_SHIFT   0UL
+#define XIOU_SLCR_BANK2_CTRL5_PULL_EN_WIDTH   26UL
+#define XIOU_SLCR_BANK2_CTRL5_PULL_EN_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK2_CTRL5_PULL_EN_DEFVAL  0x3ffffffUL
+
+/**
+ * Register: XiouSlcrBank2Ctrl6
+ */
+#define XIOU_SLCR_BANK2_CTRL6    ( ( XIOU_SLCR_BASEADDR ) + 0x00000184UL )
+#define XIOU_SLCR_BANK2_CTRL6_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_SHIFT   0UL
+#define XIOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_WIDTH   26UL
+#define XIOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_MASK    0x03ffffffUL
+#define XIOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrBank2Sts
+ */
+#define XIOU_SLCR_BANK2_STS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000188UL )
+#define XIOU_SLCR_BANK2_STS_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_BANK2_STS_VOLTAGE_MODE_SHIFT   0UL
+#define XIOU_SLCR_BANK2_STS_VOLTAGE_MODE_WIDTH   1UL
+#define XIOU_SLCR_BANK2_STS_VOLTAGE_MODE_MASK    0x00000001UL
+#define XIOU_SLCR_BANK2_STS_VOLTAGE_MODE_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioLpbck
+ */
+#define XIOU_SLCR_MIO_LPBCK    ( ( XIOU_SLCR_BASEADDR ) + 0x00000200UL )
+#define XIOU_SLCR_MIO_LPBCK_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_MIO_LPBCK_XI2CPS_LOOP_SHIFT   3UL
+#define XIOU_SLCR_MIO_LPBCK_XI2CPS_LOOP_WIDTH   1UL
+#define XIOU_SLCR_MIO_LPBCK_XI2CPS_LOOP_MASK    0x00000008UL
+#define XIOU_SLCR_MIO_LPBCK_XI2CPS_LOOP_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_LPBCK_CAN0_LOOP_CAN1_SHIFT   2UL
+#define XIOU_SLCR_MIO_LPBCK_CAN0_LOOP_CAN1_WIDTH   1UL
+#define XIOU_SLCR_MIO_LPBCK_CAN0_LOOP_CAN1_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_LPBCK_CAN0_LOOP_CAN1_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_LPBCK_UA0_LOOP_UA1_SHIFT   1UL
+#define XIOU_SLCR_MIO_LPBCK_UA0_LOOP_UA1_WIDTH   1UL
+#define XIOU_SLCR_MIO_LPBCK_UA0_LOOP_UA1_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_LPBCK_UA0_LOOP_UA1_DEFVAL  0x0UL
+
+#define XIOU_SLCR_MIO_LPBCK_XSPIPS_LOOP_SHIFT   0UL
+#define XIOU_SLCR_MIO_LPBCK_XSPIPS_LOOP_WIDTH   1UL
+#define XIOU_SLCR_MIO_LPBCK_XSPIPS_LOOP_MASK    0x00000001UL
+#define XIOU_SLCR_MIO_LPBCK_XSPIPS_LOOP_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrMioMstTri0
+ */
+#define XIOU_SLCR_MIO_MST_TRI0    ( ( XIOU_SLCR_BASEADDR ) + 0x00000204UL )
+#define XIOU_SLCR_MIO_MST_TRI0_RSTVAL   0xffffffffUL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT   31UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK    0x80000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT   30UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK    0x40000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT   29UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK    0x20000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT   28UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK    0x10000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT   27UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK    0x08000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT   26UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK    0x04000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT   25UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK    0x02000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT   24UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK    0x01000000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT   23UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK    0x00800000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT   22UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK    0x00400000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT   21UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK    0x00200000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT   20UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK    0x00100000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT   19UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK    0x00080000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT   18UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK    0x00040000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT   17UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK    0x00020000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT   16UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK    0x00010000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT   15UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK    0x00008000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT   14UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK    0x00004000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT   13UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK    0x00002000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT   12UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK    0x00001000UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT   11UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK    0x00000800UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT   10UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK    0x00000400UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT   9UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK    0x00000200UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT   8UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK    0x00000100UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT   7UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK    0x00000080UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT   6UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK    0x00000040UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT   5UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK    0x00000020UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT   4UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK    0x00000010UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT   3UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK    0x00000008UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT   2UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT   0UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK    0x00000001UL
+#define XIOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSlcrMioMstTri1
+ */
+#define XIOU_SLCR_MIO_MST_TRI1    ( ( XIOU_SLCR_BASEADDR ) + 0x00000208UL )
+#define XIOU_SLCR_MIO_MST_TRI1_RSTVAL   0xffffffffUL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT   31UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK    0x80000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT   30UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK    0x40000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT   29UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK    0x20000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT   28UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK    0x10000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT   27UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK    0x08000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT   26UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK    0x04000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT   25UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK    0x02000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT   24UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK    0x01000000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT   23UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK    0x00800000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT   22UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK    0x00400000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT   21UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK    0x00200000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT   20UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK    0x00100000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT   19UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK    0x00080000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT   18UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK    0x00040000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT   17UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK    0x00020000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT   16UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK    0x00010000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT   15UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK    0x00008000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT   14UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK    0x00004000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT   13UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK    0x00002000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT   12UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK    0x00001000UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT   11UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK    0x00000800UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT   10UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK    0x00000400UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT   9UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK    0x00000200UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT   8UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK    0x00000100UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT   7UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK    0x00000080UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT   6UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK    0x00000040UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT   5UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK    0x00000020UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT   4UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK    0x00000010UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT   3UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK    0x00000008UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT   2UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT   0UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK    0x00000001UL
+#define XIOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSlcrMioMstTri2
+ */
+#define XIOU_SLCR_MIO_MST_TRI2    ( ( XIOU_SLCR_BASEADDR ) + 0x0000020CUL )
+#define XIOU_SLCR_MIO_MST_TRI2_RSTVAL   0x00003fffUL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT   13UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK    0x00002000UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT   12UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK    0x00001000UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT   11UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK    0x00000800UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT   10UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK    0x00000400UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT   9UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK    0x00000200UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT   8UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK    0x00000100UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT   7UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK    0x00000080UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT   6UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK    0x00000040UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT   5UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK    0x00000020UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT   4UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK    0x00000010UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT   3UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK    0x00000008UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT   2UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK    0x00000004UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK    0x00000002UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_DEFVAL  0x1UL
+
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT   0UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_WIDTH   1UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK    0x00000001UL
+#define XIOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSlcrWdtClkSel
+ */
+#define XIOU_SLCR_WDT_CLK_SEL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000300UL )
+#define XIOU_SLCR_WDT_CLK_SEL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_WDT_CLK_SEL_SHIFT   0UL
+#define XIOU_SLCR_WDT_CLK_SEL_WIDTH   1UL
+#define XIOU_SLCR_WDT_CLK_SEL_MASK    0x00000001UL
+#define XIOU_SLCR_WDT_CLK_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrCanMioCtrl
+ */
+#define XIOU_SLCR_CAN_MIO_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000304UL )
+#define XIOU_SLCR_CAN_MIO_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_RXIN_REG_SHIFT   23UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_RXIN_REG_WIDTH   1UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_RXIN_REG_MASK    0x00800000UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_RXIN_REG_DEFVAL  0x0UL
+
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_REF_SEL_SHIFT   22UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_REF_SEL_WIDTH   1UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_REF_SEL_MASK    0x00400000UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_REF_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_MUX_SHIFT   15UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_MUX_WIDTH   7UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_MUX_MASK    0x003f8000UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN1_MUX_DEFVAL  0x0UL
+
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_RXIN_REG_SHIFT   8UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_RXIN_REG_WIDTH   1UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_RXIN_REG_MASK    0x00000100UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_RXIN_REG_DEFVAL  0x0UL
+
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_REF_SEL_SHIFT   7UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_REF_SEL_WIDTH   1UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_REF_SEL_MASK    0x00000080UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_REF_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_MUX_SHIFT   0UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_MUX_WIDTH   7UL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_MUX_MASK    0x0000007fUL
+#define XIOU_SLCR_CAN_MIO_CTRL_CAN0_MUX_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrGemClkCtrl
+ */
+#define XIOU_SLCR_GEM_CLK_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000308UL )
+#define XIOU_SLCR_GEM_CLK_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_LB_SEL_SHIFT   22UL
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_LB_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_LB_SEL_MASK    0x00400000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_LB_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_SEL_SHIFT   20UL
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_SEL_WIDTH   2UL
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_SEL_MASK    0x00300000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_TSU_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_SHIFT   18UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_MASK    0x00040000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_SHIFT   17UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_MASK    0x00020000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_SHIFT   16UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_MASK    0x00010000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_SHIFT   15UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_MASK    0x00008000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_SHIFT   13UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_MASK    0x00002000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_SHIFT   12UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_MASK    0x00001000UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_SHIFT   11UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_MASK    0x00000800UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_SHIFT   10UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_MASK    0x00000400UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_SHIFT   8UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_MASK    0x00000100UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_SHIFT   7UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_MASK    0x00000080UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_SHIFT   6UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_MASK    0x00000040UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_SHIFT   5UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_MASK    0x00000020UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_SHIFT   3UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_MASK    0x00000008UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_FIFO_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_SHIFT   2UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_MASK    0x00000004UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_SGMII_MODE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_SHIFT   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_MASK    0x00000002UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_REF_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_SHIFT   0UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_MASK    0x00000001UL
+#define XIOU_SLCR_GEM_CLK_CTRL_XEMACPS_RX_SRC_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdioClkCtrl
+ */
+#define XIOU_SLCR_SDIO_CLK_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x0000030CUL )
+#define XIOU_SLCR_SDIO_CLK_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_FBCLK_SEL_SHIFT   18UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_FBCLK_SEL_WIDTH   1UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_FBCLK_SEL_MASK    0x00040000UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_FBCLK_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT   17UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_WIDTH   1UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK    0x00020000UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_FBCLK_SEL_SHIFT   2UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_FBCLK_SEL_WIDTH   1UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_FBCLK_SEL_MASK    0x00000004UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_FBCLK_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_RX_SRC_SEL_SHIFT   0UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_RX_SRC_SEL_WIDTH   2UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_RX_SRC_SEL_MASK    0x00000003UL
+#define XIOU_SLCR_SDIO_CLK_CTRL_SDIO0_RX_SRC_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrCtrlRegSd
+ */
+#define XIOU_SLCR_CTRL_REG_SD    ( ( XIOU_SLCR_BASEADDR ) + 0x00000310UL )
+#define XIOU_SLCR_CTRL_REG_SD_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_SHIFT   15UL
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_WIDTH   1UL
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_MASK    0x00008000UL
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_SHIFT   0UL
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_WIDTH   1UL
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_MASK    0x00000001UL
+#define XIOU_SLCR_CTRL_REG_SD_XSDPS_EMMC_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdItapdly
+ */
+#define XIOU_SLCR_SD_ITAPDLY    ( ( XIOU_SLCR_BASEADDR ) + 0x00000314UL )
+#define XIOU_SLCR_SD_ITAPDLY_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_SHIFT   25UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_WIDTH   1UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_MASK    0x02000000UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_SHIFT   24UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_WIDTH   1UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_MASK    0x01000000UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_SHIFT   16UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_WIDTH   8UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_MASK    0x00ff0000UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_SHIFT   9UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_WIDTH   1UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_MASK    0x00000200UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPCHGWIN_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_SHIFT   8UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_WIDTH   1UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_MASK    0x00000100UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYENA_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_SHIFT   0UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_WIDTH   8UL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_MASK    0x000000ffUL
+#define XIOU_SLCR_SD_ITAPDLY_XSDPS_ITAPDLYSEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdOtapdlysel
+ */
+#define XIOU_SLCR_SD_OTAPDLYSEL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000318UL )
+#define XIOU_SLCR_SD_OTAPDLYSEL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_SHIFT   22UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_WIDTH   1UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_MASK    0x00400000UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_WIDTH   6UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_MASK    0x003f0000UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_SHIFT   6UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_WIDTH   1UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_MASK    0x00000040UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_OTAPDLYENA_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_WIDTH   6UL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_MASK    0x0000003fUL
+#define XIOU_SLCR_SD_OTAPDLYSEL_XSDPS_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdCfgReg1
+ */
+#define XIOU_SLCR_SD_CFG_REG1    ( ( XIOU_SLCR_BASEADDR ) + 0x0000031CUL )
+#define XIOU_SLCR_SD_CFG_REG1_RSTVAL   0x32403240UL
+
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_SHIFT   23UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_WIDTH   8UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_MASK    0x7f800000UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_DEFVAL  0x64UL
+
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_SHIFT   17UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_WIDTH   6UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_MASK    0x007e0000UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_DEFVAL  0x20UL
+
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_SHIFT   16UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_MASK    0x00010000UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_SHIFT   7UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_WIDTH   8UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_MASK    0x00007f80UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_BASECLK_DEFVAL  0x64UL
+
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_SHIFT   1UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_WIDTH   6UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_MASK    0x0000007eUL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_TUNIGCOUNT_DEFVAL  0x20UL
+
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_SHIFT   0UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_MASK    0x00000001UL
+#define XIOU_SLCR_SD_CFG_REG1_XSDPS_ASYNCWKPENA_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdCfgReg2
+ */
+#define XIOU_SLCR_SD_CFG_REG2    ( ( XIOU_SLCR_BASEADDR ) + 0x00000320UL )
+#define XIOU_SLCR_SD_CFG_REG2_RSTVAL   0x0ffc0ffcUL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_SHIFT   28UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_WIDTH   2UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_MASK    0x30000000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_SHIFT   27UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_MASK    0x08000000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_SHIFT   26UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_MASK    0x04000000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_SHIFT   25UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_MASK    0x02000000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_SHIFT   24UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_MASK    0x01000000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_SHIFT   23UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_MASK    0x00800000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_SHIFT   22UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_MASK    0x00400000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_SHIFT   21UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_MASK    0x00200000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_SHIFT   20UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_MASK    0x00100000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_SHIFT   19UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_MASK    0x00080000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_SHIFT   18UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_MASK    0x00040000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_SHIFT   16UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_WIDTH   2UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_MASK    0x00030000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_SHIFT   12UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_WIDTH   2UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_MASK    0x00003000UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SLOTTYPE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_SHIFT   11UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_MASK    0x00000800UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ASYCINTR_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_SHIFT   10UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_MASK    0x00000400UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_64BIT_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_SHIFT   9UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_MASK    0x00000200UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_1P8V_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_SHIFT   8UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_MASK    0x00000100UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P0V_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_SHIFT   7UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_MASK    0x00000080UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_3P3V_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_SHIFT   6UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_MASK    0x00000040UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SUSPRES_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_SHIFT   5UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_MASK    0x00000020UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_SDMA_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_SHIFT   4UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_MASK    0x00000010UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_HIGHSPEED_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_SHIFT   3UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_MASK    0x00000008UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_ADMA2_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_SHIFT   2UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_MASK    0x00000004UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_8BIT_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_SHIFT   0UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_WIDTH   2UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_MASK    0x00000003UL
+#define XIOU_SLCR_SD_CFG_REG2_XSDPS_MAXBLK_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdCfgReg3
+ */
+#define XIOU_SLCR_SD_CFG_REG3    ( ( XIOU_SLCR_BASEADDR ) + 0x00000324UL )
+#define XIOU_SLCR_SD_CFG_REG3_RSTVAL   0x06070607UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_SHIFT   26UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_MASK    0x04000000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_SHIFT   22UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_WIDTH   4UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_MASK    0x03c00000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_DEFVAL  0x8UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_SHIFT   21UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_MASK    0x00200000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_SHIFT   20UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_MASK    0x00100000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_SHIFT   19UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_MASK    0x00080000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_SHIFT   18UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_MASK    0x00040000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_SHIFT   17UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_MASK    0x00020000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_SHIFT   16UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_MASK    0x00010000UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_SHIFT   10UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_MASK    0x00000400UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_TUNINGSDR50_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_SHIFT   6UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_WIDTH   4UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_MASK    0x000003c0UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_RETUNETMR_DEFVAL  0x8UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_SHIFT   5UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_MASK    0x00000020UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDRIVER_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_SHIFT   4UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_MASK    0x00000010UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_CDRIVER_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_SHIFT   3UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_MASK    0x00000008UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_ADRIVER_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_SHIFT   2UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_MASK    0x00000004UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_DDR50_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_SHIFT   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_MASK    0x00000002UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR104_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_SHIFT   0UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_WIDTH   1UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_MASK    0x00000001UL
+#define XIOU_SLCR_SD_CFG_REG3_XSDPS_SDR50_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSlcrSdInitpreset
+ */
+#define XIOU_SLCR_SD_INITPRESET    ( ( XIOU_SLCR_BASEADDR ) + 0x00000328UL )
+#define XIOU_SLCR_SD_INITPRESET_RSTVAL   0x01000100UL
+
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_DEFVAL  0x100UL
+
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_INITPRESET_XSDPS_DEFVAL  0x100UL
+
+/**
+ * Register: XiouSlcrSdDsppreset
+ */
+#define XIOU_SLCR_SD_DSPPRESET    ( ( XIOU_SLCR_BASEADDR ) + 0x0000032CUL )
+#define XIOU_SLCR_SD_DSPPRESET_RSTVAL   0x00040004UL
+
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_DEFVAL  0x4UL
+
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_DSPPRESET_XSDPS_DEFVAL  0x4UL
+
+/**
+ * Register: XiouSlcrSdHspdpreset
+ */
+#define XIOU_SLCR_SD_HSPDPRESET    ( ( XIOU_SLCR_BASEADDR ) + 0x00000330UL )
+#define XIOU_SLCR_SD_HSPDPRESET_RSTVAL   0x00020002UL
+
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_DEFVAL  0x2UL
+
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_HSPDPRESET_XSDPS_DEFVAL  0x2UL
+
+/**
+ * Register: XiouSlcrSdSdr12preset
+ */
+#define XIOU_SLCR_SD_SDR12PRESET    ( ( XIOU_SLCR_BASEADDR ) + 0x00000334UL )
+#define XIOU_SLCR_SD_SDR12PRESET_RSTVAL   0x00040004UL
+
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_DEFVAL  0x4UL
+
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_SDR12PRESET_XSDPS_DEFVAL  0x4UL
+
+/**
+ * Register: XiouSlcrSdSdr25preset
+ */
+#define XIOU_SLCR_SD_SDR25PRESET    ( ( XIOU_SLCR_BASEADDR ) + 0x00000338UL )
+#define XIOU_SLCR_SD_SDR25PRESET_RSTVAL   0x00020002UL
+
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_DEFVAL  0x2UL
+
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_SDR25PRESET_XSDPS_DEFVAL  0x2UL
+
+/**
+ * Register: XiouSlcrSdSdr50prset
+ */
+#define XIOU_SLCR_SD_SDR50PRSET    ( ( XIOU_SLCR_BASEADDR ) + 0x0000033CUL )
+#define XIOU_SLCR_SD_SDR50PRSET_RSTVAL   0x00010001UL
+
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_SHIFT   16UL
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_DEFVAL  0x1UL
+
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_SHIFT   0UL
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_SDR50PRSET_XSDPS_SDR50PRESET_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSlcrSdSdr104prst
+ */
+#define XIOU_SLCR_SD_SDR104PRST    ( ( XIOU_SLCR_BASEADDR ) + 0x00000340UL )
+#define XIOU_SLCR_SD_SDR104PRST_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_SHIFT   16UL
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_SHIFT   0UL
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_WIDTH   13UL
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_SDR104PRST_XSDPS_SDR104PRESET_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdDdr50preset
+ */
+#define XIOU_SLCR_SD_DDR50PRESET    ( ( XIOU_SLCR_BASEADDR ) + 0x00000344UL )
+#define XIOU_SLCR_SD_DDR50PRESET_RSTVAL   0x00020002UL
+
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_MASK    0x1fff0000UL
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_DEFVAL  0x2UL
+
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_WIDTH   13UL
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_MASK    0x00001fffUL
+#define XIOU_SLCR_SD_DDR50PRESET_XSDPS_DEFVAL  0x2UL
+
+/**
+ * Register: XiouSlcrSdMaxcur1p8
+ */
+#define XIOU_SLCR_SD_MAXCUR1P8    ( ( XIOU_SLCR_BASEADDR ) + 0x0000034CUL )
+#define XIOU_SLCR_SD_MAXCUR1P8_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_WIDTH   8UL
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_MASK    0x00ff0000UL
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_WIDTH   8UL
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_MASK    0x000000ffUL
+#define XIOU_SLCR_SD_MAXCUR1P8_XSDPS_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdMaxcur3p0
+ */
+#define XIOU_SLCR_SD_MAXCUR3P0    ( ( XIOU_SLCR_BASEADDR ) + 0x00000350UL )
+#define XIOU_SLCR_SD_MAXCUR3P0_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_WIDTH   8UL
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_MASK    0x00ff0000UL
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_WIDTH   8UL
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_MASK    0x000000ffUL
+#define XIOU_SLCR_SD_MAXCUR3P0_XSDPS_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdMaxcur3p3
+ */
+#define XIOU_SLCR_SD_MAXCUR3P3    ( ( XIOU_SLCR_BASEADDR ) + 0x00000354UL )
+#define XIOU_SLCR_SD_MAXCUR3P3_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_WIDTH   8UL
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_MASK    0x00ff0000UL
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_WIDTH   8UL
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_MASK    0x000000ffUL
+#define XIOU_SLCR_SD_MAXCUR3P3_XSDPS_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdDllCtrl
+ */
+#define XIOU_SLCR_SD_DLL_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000358UL )
+#define XIOU_SLCR_SD_DLL_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_SHIFT   18UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_WIDTH   1UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_MASK    0x00040000UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_SHIFT   17UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_WIDTH   1UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_MASK    0x00020000UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_SHIFT   16UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_WIDTH   1UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_MASK    0x00010000UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_SHIFT   2UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_WIDTH   1UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_MASK    0x00000004UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_RST_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_SHIFT   1UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_WIDTH   1UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_MASK    0x00000002UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_TESTMODE_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_SHIFT   0UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_WIDTH   1UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_MASK    0x00000001UL
+#define XIOU_SLCR_SD_DLL_CTRL_XSDPS_LOCK_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrSdCdnCtrl
+ */
+#define XIOU_SLCR_SD_CDN_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x0000035CUL )
+#define XIOU_SLCR_SD_CDN_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_SHIFT   16UL
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_WIDTH   1UL
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_MASK    0x00010000UL
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_SHIFT   0UL
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_WIDTH   1UL
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_MASK    0x00000001UL
+#define XIOU_SLCR_SD_CDN_CTRL_XSDPS_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrGemCtrl
+ */
+#define XIOU_SLCR_GEM_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000360UL )
+#define XIOU_SLCR_GEM_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_SHIFT   6UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_WIDTH   2UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_MASK    0x000000c0UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_SHIFT   4UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_WIDTH   2UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_MASK    0x00000030UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_SHIFT   2UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_WIDTH   2UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_MASK    0x0000000cUL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_DEFVAL  0x0UL
+
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_SHIFT   0UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_WIDTH   2UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_MASK    0x00000003UL
+#define XIOU_SLCR_GEM_CTRL_XEMACPS_SGMII_SD_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrTtcApbClk
+ */
+#define XIOU_SLCR_TTC_APB_CLK    ( ( XIOU_SLCR_BASEADDR ) + 0x00000380UL )
+#define XIOU_SLCR_TTC_APB_CLK_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_TTC_APB_CLK_TTC3_SEL_SHIFT   6UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC3_SEL_WIDTH   2UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC3_SEL_MASK    0x000000c0UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC3_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_TTC_APB_CLK_TTC2_SEL_SHIFT   4UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC2_SEL_WIDTH   2UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC2_SEL_MASK    0x00000030UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC2_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_TTC_APB_CLK_TTC1_SEL_SHIFT   2UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC1_SEL_WIDTH   2UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC1_SEL_MASK    0x0000000cUL
+#define XIOU_SLCR_TTC_APB_CLK_TTC1_SEL_DEFVAL  0x0UL
+
+#define XIOU_SLCR_TTC_APB_CLK_TTC0_SEL_SHIFT   0UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC0_SEL_WIDTH   2UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC0_SEL_MASK    0x00000003UL
+#define XIOU_SLCR_TTC_APB_CLK_TTC0_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrTapdlyBypass
+ */
+#define XIOU_SLCR_TAPDLY_BYPASS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000390UL )
+#define XIOU_SLCR_TAPDLY_BYPASS_RSTVAL   0x00000007UL
+
+#define XIOU_SLCR_TAPDLY_BYPASS_LQSPI_RX_SHIFT   2UL
+#define XIOU_SLCR_TAPDLY_BYPASS_LQSPI_RX_WIDTH   1UL
+#define XIOU_SLCR_TAPDLY_BYPASS_LQSPI_RX_MASK    0x00000004UL
+#define XIOU_SLCR_TAPDLY_BYPASS_LQSPI_RX_DEFVAL  0x1UL
+
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_OUT_SHIFT   1UL
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_OUT_WIDTH   1UL
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_OUT_MASK    0x00000002UL
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_OUT_DEFVAL  0x1UL
+
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_IN_SHIFT   0UL
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_IN_WIDTH   1UL
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_IN_MASK    0x00000001UL
+#define XIOU_SLCR_TAPDLY_BYPASS_XNANDPS8_DQS_IN_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSlcrCoherentCtrl
+ */
+#define XIOU_SLCR_COHERENT_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000400UL )
+#define XIOU_SLCR_COHERENT_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XQSPIPSAXI_COH_SHIFT   28UL
+#define XIOU_SLCR_COHERENT_CTRL_XQSPIPSAXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XQSPIPSAXI_COH_MASK    0xf0000000UL
+#define XIOU_SLCR_COHERENT_CTRL_XQSPIPSAXI_COH_DEFVAL  0x0UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XNANDPS8_AXI_COH_SHIFT   24UL
+#define XIOU_SLCR_COHERENT_CTRL_XNANDPS8_AXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XNANDPS8_AXI_COH_MASK    0x0f000000UL
+#define XIOU_SLCR_COHERENT_CTRL_XNANDPS8_AXI_COH_DEFVAL  0x0UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_SHIFT   20UL
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_MASK    0x00f00000UL
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_DEFVAL  0x0UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_SHIFT   16UL
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_MASK    0x000f0000UL
+#define XIOU_SLCR_COHERENT_CTRL_XSDPS_AXI_COH_DEFVAL  0x0UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_SHIFT   12UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_MASK    0x0000f000UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_DEFVAL  0x0UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_SHIFT   8UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_MASK    0x00000f00UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_DEFVAL  0x0UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_SHIFT   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_MASK    0x000000f0UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_DEFVAL  0x0UL
+
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_SHIFT   0UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_WIDTH   4UL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_MASK    0x0000000fUL
+#define XIOU_SLCR_COHERENT_CTRL_XEMACPS_AXI_COH_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrVideoPssClkSel
+ */
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000404UL )
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_ALT_SHIFT   1UL
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_ALT_WIDTH   1UL
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_ALT_MASK    0x00000002UL
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_ALT_DEFVAL  0x0UL
+
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_SHIFT   0UL
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_WIDTH   1UL
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_MASK    0x00000001UL
+#define XIOU_SLCR_VIDEO_PSS_CLK_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrInterconnectRoute
+ */
+#define XIOU_SLCR_INTERCONNECT_ROUTE    ( ( XIOU_SLCR_BASEADDR ) + 0x00000408UL )
+#define XIOU_SLCR_INTERCONNECT_ROUTE_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XNANDPS8_SHIFT   7UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XNANDPS8_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XNANDPS8_MASK    0x00000080UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XNANDPS8_DEFVAL  0x0UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_QSPI_SHIFT   6UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_QSPI_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_QSPI_MASK    0x00000040UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_QSPI_DEFVAL  0x0UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_SHIFT   5UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_MASK    0x00000020UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_SHIFT   4UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_MASK    0x00000010UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XSDPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_SHIFT   3UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_MASK    0x00000008UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_SHIFT   2UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_MASK    0x00000004UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_SHIFT   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_MASK    0x00000002UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_DEFVAL  0x0UL
+
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_SHIFT   0UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_WIDTH   1UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_MASK    0x00000001UL
+#define XIOU_SLCR_INTERCONNECT_ROUTE_XEMACPS_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrRamXemacps
+ */
+#define XIOU_SLCR_RAM_XEMACPS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000500UL )
+#define XIOU_SLCR_RAM_XEMACPS_RSTVAL   0x00005b5bUL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_SHIFT   14UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_MASK    0x00004000UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_SHIFT   11UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_MASK    0x00003800UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_SHIFT   8UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_MASK    0x00000700UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamXemacps
+ */
+#define XIOU_SLCR_RAM_XEMACPS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000504UL )
+#define XIOU_SLCR_RAM_XEMACPS_RSTVAL   0x00005b5bUL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_SHIFT   14UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_MASK    0x00004000UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_SHIFT   11UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_MASK    0x00003800UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_SHIFT   8UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_MASK    0x00000700UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamXemacps
+ */
+#define XIOU_SLCR_RAM_XEMACPS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000508UL )
+#define XIOU_SLCR_RAM_XEMACPS_RSTVAL   0x00005b5bUL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_SHIFT   14UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_MASK    0x00004000UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_SHIFT   11UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_MASK    0x00003800UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_SHIFT   8UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_MASK    0x00000700UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamXemacps
+ */
+#define XIOU_SLCR_RAM_XEMACPS    ( ( XIOU_SLCR_BASEADDR ) + 0x0000050CUL )
+#define XIOU_SLCR_RAM_XEMACPS_RSTVAL   0x00005b5bUL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_SHIFT   14UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_MASK    0x00004000UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA1_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_SHIFT   11UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_MASK    0x00003800UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_SHIFT   8UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_MASK    0x00000700UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_XEMACPS_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_XEMACPS_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamXsdps
+ */
+#define XIOU_SLCR_RAM_XSDPS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000510UL )
+#define XIOU_SLCR_RAM_XSDPS_RSTVAL   0x0000005bUL
+
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamXsdps
+ */
+#define XIOU_SLCR_RAM_XSDPS    ( ( XIOU_SLCR_BASEADDR ) + 0x00000514UL )
+#define XIOU_SLCR_RAM_XSDPS_RSTVAL   0x0000005bUL
+
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_XSDPS_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_XSDPS_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_XSDPS_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamCan0
+ */
+#define XIOU_SLCR_RAM_CAN0    ( ( XIOU_SLCR_BASEADDR ) + 0x00000518UL )
+#define XIOU_SLCR_RAM_CAN0_RSTVAL   0x005b5b5bUL
+
+#define XIOU_SLCR_RAM_CAN0_EMASA2_SHIFT   22UL
+#define XIOU_SLCR_RAM_CAN0_EMASA2_WIDTH   1UL
+#define XIOU_SLCR_RAM_CAN0_EMASA2_MASK    0x00400000UL
+#define XIOU_SLCR_RAM_CAN0_EMASA2_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_CAN0_EMAB2_SHIFT   19UL
+#define XIOU_SLCR_RAM_CAN0_EMAB2_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN0_EMAB2_MASK    0x00380000UL
+#define XIOU_SLCR_RAM_CAN0_EMAB2_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN0_EMAA2_SHIFT   16UL
+#define XIOU_SLCR_RAM_CAN0_EMAA2_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN0_EMAA2_MASK    0x00070000UL
+#define XIOU_SLCR_RAM_CAN0_EMAA2_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN0_EMASA1_SHIFT   14UL
+#define XIOU_SLCR_RAM_CAN0_EMASA1_WIDTH   1UL
+#define XIOU_SLCR_RAM_CAN0_EMASA1_MASK    0x00004000UL
+#define XIOU_SLCR_RAM_CAN0_EMASA1_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_CAN0_EMAB1_SHIFT   11UL
+#define XIOU_SLCR_RAM_CAN0_EMAB1_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN0_EMAB1_MASK    0x00003800UL
+#define XIOU_SLCR_RAM_CAN0_EMAB1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN0_EMAA1_SHIFT   8UL
+#define XIOU_SLCR_RAM_CAN0_EMAA1_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN0_EMAA1_MASK    0x00000700UL
+#define XIOU_SLCR_RAM_CAN0_EMAA1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN0_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_CAN0_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_CAN0_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_CAN0_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_CAN0_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_CAN0_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN0_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_CAN0_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN0_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_CAN0_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN0_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_CAN0_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamCan1
+ */
+#define XIOU_SLCR_RAM_CAN1    ( ( XIOU_SLCR_BASEADDR ) + 0x0000051CUL )
+#define XIOU_SLCR_RAM_CAN1_RSTVAL   0x005b5b5bUL
+
+#define XIOU_SLCR_RAM_CAN1_EMASA2_SHIFT   22UL
+#define XIOU_SLCR_RAM_CAN1_EMASA2_WIDTH   1UL
+#define XIOU_SLCR_RAM_CAN1_EMASA2_MASK    0x00400000UL
+#define XIOU_SLCR_RAM_CAN1_EMASA2_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_CAN1_EMAB2_SHIFT   19UL
+#define XIOU_SLCR_RAM_CAN1_EMAB2_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN1_EMAB2_MASK    0x00380000UL
+#define XIOU_SLCR_RAM_CAN1_EMAB2_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN1_EMAA2_SHIFT   16UL
+#define XIOU_SLCR_RAM_CAN1_EMAA2_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN1_EMAA2_MASK    0x00070000UL
+#define XIOU_SLCR_RAM_CAN1_EMAA2_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN1_EMASA1_SHIFT   14UL
+#define XIOU_SLCR_RAM_CAN1_EMASA1_WIDTH   1UL
+#define XIOU_SLCR_RAM_CAN1_EMASA1_MASK    0x00004000UL
+#define XIOU_SLCR_RAM_CAN1_EMASA1_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_CAN1_EMAB1_SHIFT   11UL
+#define XIOU_SLCR_RAM_CAN1_EMAB1_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN1_EMAB1_MASK    0x00003800UL
+#define XIOU_SLCR_RAM_CAN1_EMAB1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN1_EMAA1_SHIFT   8UL
+#define XIOU_SLCR_RAM_CAN1_EMAA1_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN1_EMAA1_MASK    0x00000700UL
+#define XIOU_SLCR_RAM_CAN1_EMAA1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN1_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_CAN1_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_CAN1_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_CAN1_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_CAN1_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_CAN1_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN1_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_CAN1_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_CAN1_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_CAN1_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_CAN1_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_CAN1_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamLqspi
+ */
+#define XIOU_SLCR_RAM_LQSPI    ( ( XIOU_SLCR_BASEADDR ) + 0x00000520UL )
+#define XIOU_SLCR_RAM_LQSPI_RSTVAL   0x00002ddbUL
+
+#define XIOU_SLCR_RAM_LQSPI_EMASA1_SHIFT   13UL
+#define XIOU_SLCR_RAM_LQSPI_EMASA1_WIDTH   1UL
+#define XIOU_SLCR_RAM_LQSPI_EMASA1_MASK    0x00002000UL
+#define XIOU_SLCR_RAM_LQSPI_EMASA1_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_LQSPI_EMAB1_SHIFT   10UL
+#define XIOU_SLCR_RAM_LQSPI_EMAB1_WIDTH   3UL
+#define XIOU_SLCR_RAM_LQSPI_EMAB1_MASK    0x00001c00UL
+#define XIOU_SLCR_RAM_LQSPI_EMAB1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_LQSPI_EMAA1_SHIFT   7UL
+#define XIOU_SLCR_RAM_LQSPI_EMAA1_WIDTH   3UL
+#define XIOU_SLCR_RAM_LQSPI_EMAA1_MASK    0x00000380UL
+#define XIOU_SLCR_RAM_LQSPI_EMAA1_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_LQSPI_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_LQSPI_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_LQSPI_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_LQSPI_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_LQSPI_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_LQSPI_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_LQSPI_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_LQSPI_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_LQSPI_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_LQSPI_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_LQSPI_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_LQSPI_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrRamXnandps8
+ */
+#define XIOU_SLCR_RAM_XNANDPS8    ( ( XIOU_SLCR_BASEADDR ) + 0x00000524UL )
+#define XIOU_SLCR_RAM_XNANDPS8_RSTVAL   0x0000005bUL
+
+#define XIOU_SLCR_RAM_XNANDPS8_EMASA0_SHIFT   6UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMASA0_WIDTH   1UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMASA0_MASK    0x00000040UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMASA0_DEFVAL  0x1UL
+
+#define XIOU_SLCR_RAM_XNANDPS8_EMAB0_SHIFT   3UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMAB0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMAB0_MASK    0x00000038UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMAB0_DEFVAL  0x3UL
+
+#define XIOU_SLCR_RAM_XNANDPS8_EMAA0_SHIFT   0UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMAA0_WIDTH   3UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMAA0_MASK    0x00000007UL
+#define XIOU_SLCR_RAM_XNANDPS8_EMAA0_DEFVAL  0x3UL
+
+/**
+ * Register: XiouSlcrCtrl
+ */
+#define XIOU_SLCR_CTRL    ( ( XIOU_SLCR_BASEADDR ) + 0x00000600UL )
+#define XIOU_SLCR_CTRL_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_CTRL_SLVERR_EN_SHIFT   0UL
+#define XIOU_SLCR_CTRL_SLVERR_EN_WIDTH   1UL
+#define XIOU_SLCR_CTRL_SLVERR_EN_MASK    0x00000001UL
+#define XIOU_SLCR_CTRL_SLVERR_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrIsr
+ */
+#define XIOU_SLCR_ISR    ( ( XIOU_SLCR_BASEADDR ) + 0x00000700UL )
+#define XIOU_SLCR_ISR_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_ISR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SLCR_ISR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SLCR_ISR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SLCR_ISR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrImr
+ */
+#define XIOU_SLCR_IMR    ( ( XIOU_SLCR_BASEADDR ) + 0x00000704UL )
+#define XIOU_SLCR_IMR_RSTVAL   0x00000001UL
+
+#define XIOU_SLCR_IMR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SLCR_IMR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SLCR_IMR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SLCR_IMR_ADDR_DECD_ERR_DEFVAL  0x1UL
+
+/**
+ * Register: XiouSlcrIer
+ */
+#define XIOU_SLCR_IER    ( ( XIOU_SLCR_BASEADDR ) + 0x00000708UL )
+#define XIOU_SLCR_IER_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_IER_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SLCR_IER_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SLCR_IER_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SLCR_IER_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrIdr
+ */
+#define XIOU_SLCR_IDR    ( ( XIOU_SLCR_BASEADDR ) + 0x0000070CUL )
+#define XIOU_SLCR_IDR_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_IDR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SLCR_IDR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SLCR_IDR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SLCR_IDR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XiouSlcrItr
+ */
+#define XIOU_SLCR_ITR    ( ( XIOU_SLCR_BASEADDR ) + 0x00000710UL )
+#define XIOU_SLCR_ITR_RSTVAL   0x00000000UL
+
+#define XIOU_SLCR_ITR_ADDR_DECD_ERR_SHIFT   0UL
+#define XIOU_SLCR_ITR_ADDR_DECD_ERR_WIDTH   1UL
+#define XIOU_SLCR_ITR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XIOU_SLCR_ITR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XIOU_SLCR_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_slcr.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_slcr.h
new file mode 100644
index 000000000..cc05672e4
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_slcr.h
@@ -0,0 +1,5667 @@
+/* ### HEADER ### */
+
+#ifndef __XLPD_SLCR_H__
+#define __XLPD_SLCR_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XlpdSlcr Base Address
+ */
+#define XLPD_SLCR_BASEADDR      0xFF410000UL
+
+/**
+ * Register: XlpdSlcrWprot0
+ */
+#define XLPD_SLCR_WPROT0    ( ( XLPD_SLCR_BASEADDR ) + 0x00000000UL )
+#define XLPD_SLCR_WPROT0_RSTVAL   0x00000001UL
+
+#define XLPD_SLCR_WPROT0_ACT_SHIFT   0UL
+#define XLPD_SLCR_WPROT0_ACT_WIDTH   1UL
+#define XLPD_SLCR_WPROT0_ACT_MASK    0x00000001UL
+#define XLPD_SLCR_WPROT0_ACT_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrCtrl
+ */
+#define XLPD_SLCR_CTRL    ( ( XLPD_SLCR_BASEADDR ) + 0x00000004UL )
+#define XLPD_SLCR_CTRL_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_CTRL_SLVERR_EN_SHIFT   0UL
+#define XLPD_SLCR_CTRL_SLVERR_EN_WIDTH   1UL
+#define XLPD_SLCR_CTRL_SLVERR_EN_MASK    0x00000001UL
+#define XLPD_SLCR_CTRL_SLVERR_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrIsr
+ */
+#define XLPD_SLCR_ISR    ( ( XLPD_SLCR_BASEADDR ) + 0x00000008UL )
+#define XLPD_SLCR_ISR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ISR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_ISR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_ISR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_ISR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrImr
+ */
+#define XLPD_SLCR_IMR    ( ( XLPD_SLCR_BASEADDR ) + 0x0000000CUL )
+#define XLPD_SLCR_IMR_RSTVAL   0x00000001UL
+
+#define XLPD_SLCR_IMR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_IMR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_IMR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_IMR_ADDR_DECD_ERR_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrIer
+ */
+#define XLPD_SLCR_IER    ( ( XLPD_SLCR_BASEADDR ) + 0x00000010UL )
+#define XLPD_SLCR_IER_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_IER_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_IER_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_IER_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_IER_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrIdr
+ */
+#define XLPD_SLCR_IDR    ( ( XLPD_SLCR_BASEADDR ) + 0x00000014UL )
+#define XLPD_SLCR_IDR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_IDR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_IDR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_IDR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_IDR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrItr
+ */
+#define XLPD_SLCR_ITR    ( ( XLPD_SLCR_BASEADDR ) + 0x00000018UL )
+#define XLPD_SLCR_ITR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ITR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_ITR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_ITR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_ITR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSafetyChk0
+ */
+#define XLPD_SLCR_SAFETY_CHK0    ( ( XLPD_SLCR_BASEADDR ) + 0x00000040UL )
+#define XLPD_SLCR_SAFETY_CHK0_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SAFETY_CHK0_VAL_SHIFT   0UL
+#define XLPD_SLCR_SAFETY_CHK0_VAL_WIDTH   32UL
+#define XLPD_SLCR_SAFETY_CHK0_VAL_MASK    0xffffffffUL
+#define XLPD_SLCR_SAFETY_CHK0_VAL_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSafetyChk1
+ */
+#define XLPD_SLCR_SAFETY_CHK1    ( ( XLPD_SLCR_BASEADDR ) + 0x00000044UL )
+#define XLPD_SLCR_SAFETY_CHK1_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SAFETY_CHK1_VAL_SHIFT   0UL
+#define XLPD_SLCR_SAFETY_CHK1_VAL_WIDTH   32UL
+#define XLPD_SLCR_SAFETY_CHK1_VAL_MASK    0xffffffffUL
+#define XLPD_SLCR_SAFETY_CHK1_VAL_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSafetyChk2
+ */
+#define XLPD_SLCR_SAFETY_CHK2    ( ( XLPD_SLCR_BASEADDR ) + 0x00000048UL )
+#define XLPD_SLCR_SAFETY_CHK2_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SAFETY_CHK2_VAL_SHIFT   0UL
+#define XLPD_SLCR_SAFETY_CHK2_VAL_WIDTH   32UL
+#define XLPD_SLCR_SAFETY_CHK2_VAL_MASK    0xffffffffUL
+#define XLPD_SLCR_SAFETY_CHK2_VAL_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSafetyChk3
+ */
+#define XLPD_SLCR_SAFETY_CHK3    ( ( XLPD_SLCR_BASEADDR ) + 0x0000004CUL )
+#define XLPD_SLCR_SAFETY_CHK3_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SAFETY_CHK3_VAL_SHIFT   0UL
+#define XLPD_SLCR_SAFETY_CHK3_VAL_WIDTH   32UL
+#define XLPD_SLCR_SAFETY_CHK3_VAL_MASK    0xffffffffUL
+#define XLPD_SLCR_SAFETY_CHK3_VAL_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrXcsupmuWdtClkSel
+ */
+#define XLPD_SLCR_XCSUPMU_WDT_CLK_SEL    ( ( XLPD_SLCR_BASEADDR ) + 0x00000050UL )
+#define XLPD_SLCR_XCSUPMU_WDT_CLK_SEL_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_XCSUPMU_WDT_CLK_SEL_SHIFT   0UL
+#define XLPD_SLCR_XCSUPMU_WDT_CLK_SEL_WIDTH   1UL
+#define XLPD_SLCR_XCSUPMU_WDT_CLK_SEL_MASK    0x00000001UL
+#define XLPD_SLCR_XCSUPMU_WDT_CLK_SEL_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrAdmaCfg
+ */
+#define XLPD_SLCR_ADMA_CFG    ( ( XLPD_SLCR_BASEADDR ) + 0x0000200CUL )
+#define XLPD_SLCR_ADMA_CFG_RSTVAL   0x00000028UL
+
+#define XLPD_SLCR_ADMA_CFG_BUSWID_SHIFT   5UL
+#define XLPD_SLCR_ADMA_CFG_BUSWID_WIDTH   2UL
+#define XLPD_SLCR_ADMA_CFG_BUSWID_MASK    0x00000060UL
+#define XLPD_SLCR_ADMA_CFG_BUSWID_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ADMA_CFG_NUM_CH_SHIFT   0UL
+#define XLPD_SLCR_ADMA_CFG_NUM_CH_WIDTH   5UL
+#define XLPD_SLCR_ADMA_CFG_NUM_CH_MASK    0x0000001fUL
+#define XLPD_SLCR_ADMA_CFG_NUM_CH_DEFVAL  0x8UL
+
+/**
+ * Register: XlpdSlcrAdmaRam
+ */
+#define XLPD_SLCR_ADMA_RAM    ( ( XLPD_SLCR_BASEADDR ) + 0x00002010UL )
+#define XLPD_SLCR_ADMA_RAM_RSTVAL   0x00003b3bUL
+
+#define XLPD_SLCR_ADMA_RAM1_EMAB_SHIFT   12UL
+#define XLPD_SLCR_ADMA_RAM1_EMAB_WIDTH   3UL
+#define XLPD_SLCR_ADMA_RAM1_EMAB_MASK    0x00007000UL
+#define XLPD_SLCR_ADMA_RAM1_EMAB_DEFVAL  0x3UL
+
+#define XLPD_SLCR_ADMA_RAM1_EMASA_SHIFT   11UL
+#define XLPD_SLCR_ADMA_RAM1_EMASA_WIDTH   1UL
+#define XLPD_SLCR_ADMA_RAM1_EMASA_MASK    0x00000800UL
+#define XLPD_SLCR_ADMA_RAM1_EMASA_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ADMA_RAM1_EMAA_SHIFT   8UL
+#define XLPD_SLCR_ADMA_RAM1_EMAA_WIDTH   3UL
+#define XLPD_SLCR_ADMA_RAM1_EMAA_MASK    0x00000700UL
+#define XLPD_SLCR_ADMA_RAM1_EMAA_DEFVAL  0x3UL
+
+#define XLPD_SLCR_ADMA_RAM0_EMAB_SHIFT   4UL
+#define XLPD_SLCR_ADMA_RAM0_EMAB_WIDTH   3UL
+#define XLPD_SLCR_ADMA_RAM0_EMAB_MASK    0x00000070UL
+#define XLPD_SLCR_ADMA_RAM0_EMAB_DEFVAL  0x3UL
+
+#define XLPD_SLCR_ADMA_RAM0_EMASA_SHIFT   3UL
+#define XLPD_SLCR_ADMA_RAM0_EMASA_WIDTH   1UL
+#define XLPD_SLCR_ADMA_RAM0_EMASA_MASK    0x00000008UL
+#define XLPD_SLCR_ADMA_RAM0_EMASA_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ADMA_RAM0_EMAA_SHIFT   0UL
+#define XLPD_SLCR_ADMA_RAM0_EMAA_WIDTH   3UL
+#define XLPD_SLCR_ADMA_RAM0_EMAA_MASK    0x00000007UL
+#define XLPD_SLCR_ADMA_RAM0_EMAA_DEFVAL  0x3UL
+
+/**
+ * Register: XlpdSlcrErrAibaxiIsr
+ */
+#define XLPD_SLCR_ERR_AIBAXI_ISR    ( ( XLPD_SLCR_BASEADDR ) + 0x00003000UL )
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS2_SHIFT   28UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS2_MASK    0x10000000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_DDR_SHIFT   27UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_DDR_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_DDR_MASK    0x08000000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_DDR_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_OCMS_SHIFT   26UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_OCMS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_OCMS_MASK    0x04000000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_OCMS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_MAIN_SHIFT   24UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_MAIN_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_MAIN_MASK    0x01000000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_MAIN_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB1S_SHIFT   23UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB1S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB1S_MASK    0x00800000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB1S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB0S_SHIFT   22UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB0S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB0S_MASK    0x00400000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_USB0S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS1_SHIFT   19UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS1_MASK    0x00080000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS0_SHIFT   18UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS0_MASK    0x00040000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUS0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM1_SHIFT   17UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM1_MASK    0x00020000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM0_SHIFT   16UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM0_MASK    0x00010000UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_RPUM0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_OCM_SHIFT   3UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_OCM_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_OCM_MASK    0x00000008UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_OCM_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_LPDIBS_SHIFT   2UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_LPDIBS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_LPDIBS_MASK    0x00000004UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_FPD_LPDIBS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS1_SHIFT   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS1_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS0_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS0_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAXI_ISR_AFIFS0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAibaxiImr
+ */
+#define XLPD_SLCR_ERR_AIBAXI_IMR    ( ( XLPD_SLCR_BASEADDR ) + 0x00003008UL )
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RSTVAL   0x1dcf000fUL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS2_SHIFT   28UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS2_MASK    0x10000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_DDR_SHIFT   27UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_DDR_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_DDR_MASK    0x08000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_DDR_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_OCMS_SHIFT   26UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_OCMS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_OCMS_MASK    0x04000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_OCMS_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_MAIN_SHIFT   24UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_MAIN_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_MAIN_MASK    0x01000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_MAIN_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB1S_SHIFT   23UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB1S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB1S_MASK    0x00800000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB1S_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB0S_SHIFT   22UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB0S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB0S_MASK    0x00400000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_USB0S_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS1_SHIFT   19UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS1_MASK    0x00080000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS0_SHIFT   18UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS0_MASK    0x00040000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUS0_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM1_SHIFT   17UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM1_MASK    0x00020000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM0_SHIFT   16UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM0_MASK    0x00010000UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_RPUM0_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_OCM_SHIFT   3UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_OCM_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_OCM_MASK    0x00000008UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_OCM_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_LPDIBS_SHIFT   2UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_LPDIBS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_LPDIBS_MASK    0x00000004UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_FPD_LPDIBS_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS1_SHIFT   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS1_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS0_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS0_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAXI_IMR_AFIFS0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrErrAibaxiIer
+ */
+#define XLPD_SLCR_ERR_AIBAXI_IER    ( ( XLPD_SLCR_BASEADDR ) + 0x00003010UL )
+#define XLPD_SLCR_ERR_AIBAXI_IER_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS2_SHIFT   28UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS2_MASK    0x10000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_DDR_SHIFT   27UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_DDR_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_DDR_MASK    0x08000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_DDR_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_OCMS_SHIFT   26UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_OCMS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_OCMS_MASK    0x04000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_OCMS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_MAIN_SHIFT   24UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_MAIN_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_MAIN_MASK    0x01000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_MAIN_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB1S_SHIFT   23UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB1S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB1S_MASK    0x00800000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB1S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB0S_SHIFT   22UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB0S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB0S_MASK    0x00400000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_USB0S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS1_SHIFT   19UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS1_MASK    0x00080000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS0_SHIFT   18UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS0_MASK    0x00040000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUS0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM1_SHIFT   17UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM1_MASK    0x00020000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM0_SHIFT   16UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM0_MASK    0x00010000UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_RPUM0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_OCM_SHIFT   3UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_OCM_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_OCM_MASK    0x00000008UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_OCM_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_LPDIBS_SHIFT   2UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_LPDIBS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_LPDIBS_MASK    0x00000004UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_FPD_LPDIBS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS1_SHIFT   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS1_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS0_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS0_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAXI_IER_AFIFS0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAibaxiIdr
+ */
+#define XLPD_SLCR_ERR_AIBAXI_IDR    ( ( XLPD_SLCR_BASEADDR ) + 0x00003018UL )
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS2_SHIFT   28UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS2_MASK    0x10000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_DDR_SHIFT   27UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_DDR_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_DDR_MASK    0x08000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_DDR_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_OCMS_SHIFT   26UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_OCMS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_OCMS_MASK    0x04000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_OCMS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_MAIN_SHIFT   24UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_MAIN_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_MAIN_MASK    0x01000000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_MAIN_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB1S_SHIFT   23UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB1S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB1S_MASK    0x00800000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB1S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB0S_SHIFT   22UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB0S_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB0S_MASK    0x00400000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_USB0S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS1_SHIFT   19UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS1_MASK    0x00080000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS0_SHIFT   18UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS0_MASK    0x00040000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUS0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM1_SHIFT   17UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM1_MASK    0x00020000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM0_SHIFT   16UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM0_MASK    0x00010000UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_RPUM0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_OCM_SHIFT   3UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_OCM_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_OCM_MASK    0x00000008UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_OCM_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_LPDIBS_SHIFT   2UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_LPDIBS_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_LPDIBS_MASK    0x00000004UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_FPD_LPDIBS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS1_SHIFT   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS1_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS1_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS0_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS0_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS0_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAXI_IDR_AFIFS0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAibapbIsr
+ */
+#define XLPD_SLCR_ERR_AIBAPB_ISR    ( ( XLPD_SLCR_BASEADDR ) + 0x00003020UL )
+#define XLPD_SLCR_ERR_AIBAPB_ISR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_AIBAPB_ISR_GPU_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAPB_ISR_GPU_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAPB_ISR_GPU_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAPB_ISR_GPU_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAibapbImr
+ */
+#define XLPD_SLCR_ERR_AIBAPB_IMR    ( ( XLPD_SLCR_BASEADDR ) + 0x00003024UL )
+#define XLPD_SLCR_ERR_AIBAPB_IMR_RSTVAL   0x00000001UL
+
+#define XLPD_SLCR_ERR_AIBAPB_IMR_GPU_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAPB_IMR_GPU_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAPB_IMR_GPU_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAPB_IMR_GPU_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrErrAibapbIer
+ */
+#define XLPD_SLCR_ERR_AIBAPB_IER    ( ( XLPD_SLCR_BASEADDR ) + 0x00003028UL )
+#define XLPD_SLCR_ERR_AIBAPB_IER_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_AIBAPB_IER_GPU_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAPB_IER_GPU_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAPB_IER_GPU_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAPB_IER_GPU_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAibapbIdr
+ */
+#define XLPD_SLCR_ERR_AIBAPB_IDR    ( ( XLPD_SLCR_BASEADDR ) + 0x0000302CUL )
+#define XLPD_SLCR_ERR_AIBAPB_IDR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_AIBAPB_IDR_GPU_SHIFT   0UL
+#define XLPD_SLCR_ERR_AIBAPB_IDR_GPU_WIDTH   1UL
+#define XLPD_SLCR_ERR_AIBAPB_IDR_GPU_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_AIBAPB_IDR_GPU_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrIsoAibaxiReq
+ */
+#define XLPD_SLCR_ISO_AIBAXI_REQ    ( ( XLPD_SLCR_BASEADDR ) + 0x00003030UL )
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS2_SHIFT   28UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS2_MASK    0x10000000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_DDR_SHIFT   27UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_DDR_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_DDR_MASK    0x08000000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_DDR_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_OCMS_SHIFT   26UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_OCMS_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_OCMS_MASK    0x04000000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_OCMS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_MAIN_SHIFT   24UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_MAIN_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_MAIN_MASK    0x01000000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_MAIN_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB1S_SHIFT   23UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB1S_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB1S_MASK    0x00800000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB1S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB0S_SHIFT   22UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB0S_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB0S_MASK    0x00400000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_USB0S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS1_SHIFT   19UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS1_MASK    0x00080000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS0_SHIFT   18UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS0_MASK    0x00040000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUS0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM1_SHIFT   17UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM1_MASK    0x00020000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM0_SHIFT   16UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM0_MASK    0x00010000UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_RPUM0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_OCM_SHIFT   3UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_OCM_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_OCM_MASK    0x00000008UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_OCM_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_LPDIBS_SHIFT   2UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_LPDIBS_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_LPDIBS_MASK    0x00000004UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_FPD_LPDIBS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS1_SHIFT   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS1_MASK    0x00000002UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS0_SHIFT   0UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS0_MASK    0x00000001UL
+#define XLPD_SLCR_ISO_AIBAXI_REQ_AFIFS0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrIsoAibaxiType
+ */
+#define XLPD_SLCR_ISO_AIBAXI_TYPE    ( ( XLPD_SLCR_BASEADDR ) + 0x00003038UL )
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RSTVAL   0x19cf000fUL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS2_SHIFT   28UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS2_MASK    0x10000000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_DDR_SHIFT   27UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_DDR_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_DDR_MASK    0x08000000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_DDR_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_OCMS_SHIFT   26UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_OCMS_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_OCMS_MASK    0x04000000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_OCMS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_MAIN_SHIFT   24UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_MAIN_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_MAIN_MASK    0x01000000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_MAIN_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB1S_SHIFT   23UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB1S_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB1S_MASK    0x00800000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB1S_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB0S_SHIFT   22UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB0S_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB0S_MASK    0x00400000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_USB0S_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS1_SHIFT   19UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS1_MASK    0x00080000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS0_SHIFT   18UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS0_MASK    0x00040000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUS0_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM1_SHIFT   17UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM1_MASK    0x00020000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM0_SHIFT   16UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM0_MASK    0x00010000UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_RPUM0_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_OCM_SHIFT   3UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_OCM_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_OCM_MASK    0x00000008UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_OCM_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_LPDIBS_SHIFT   2UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_LPDIBS_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_LPDIBS_MASK    0x00000004UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_FPD_LPDIBS_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS1_SHIFT   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS1_MASK    0x00000002UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS0_SHIFT   0UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS0_MASK    0x00000001UL
+#define XLPD_SLCR_ISO_AIBAXI_TYPE_AFIFS0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrIsoAibaxiAck
+ */
+#define XLPD_SLCR_ISO_AIBAXI_ACK    ( ( XLPD_SLCR_BASEADDR ) + 0x00003040UL )
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS2_SHIFT   28UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS2_MASK    0x10000000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_DDR_SHIFT   27UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_DDR_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_DDR_MASK    0x08000000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_DDR_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_OCMS_SHIFT   26UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_OCMS_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_OCMS_MASK    0x04000000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_OCMS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_MAIN_SHIFT   24UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_MAIN_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_MAIN_MASK    0x01000000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_MAIN_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB1S_SHIFT   23UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB1S_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB1S_MASK    0x00800000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB1S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB0S_SHIFT   22UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB0S_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB0S_MASK    0x00400000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_USB0S_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS1_SHIFT   19UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS1_MASK    0x00080000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS0_SHIFT   18UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS0_MASK    0x00040000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUS0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM1_SHIFT   17UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM1_MASK    0x00020000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM0_SHIFT   16UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM0_MASK    0x00010000UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_RPUM0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_OCM_SHIFT   3UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_OCM_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_OCM_MASK    0x00000008UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_OCM_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_LPDIBS_SHIFT   2UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_LPDIBS_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_LPDIBS_MASK    0x00000004UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_FPD_LPDIBS_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS1_SHIFT   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS1_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS1_MASK    0x00000002UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS0_SHIFT   0UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS0_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS0_MASK    0x00000001UL
+#define XLPD_SLCR_ISO_AIBAXI_ACK_AFIFS0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrIsoAibapbReq
+ */
+#define XLPD_SLCR_ISO_AIBAPB_REQ    ( ( XLPD_SLCR_BASEADDR ) + 0x00003048UL )
+#define XLPD_SLCR_ISO_AIBAPB_REQ_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ISO_AIBAPB_REQ_GPU_SHIFT   0UL
+#define XLPD_SLCR_ISO_AIBAPB_REQ_GPU_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAPB_REQ_GPU_MASK    0x00000001UL
+#define XLPD_SLCR_ISO_AIBAPB_REQ_GPU_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrIsoAibapbType
+ */
+#define XLPD_SLCR_ISO_AIBAPB_TYPE    ( ( XLPD_SLCR_BASEADDR ) + 0x0000304CUL )
+#define XLPD_SLCR_ISO_AIBAPB_TYPE_RSTVAL   0x00000001UL
+
+#define XLPD_SLCR_ISO_AIBAPB_TYPE_GPU_SHIFT   0UL
+#define XLPD_SLCR_ISO_AIBAPB_TYPE_GPU_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAPB_TYPE_GPU_MASK    0x00000001UL
+#define XLPD_SLCR_ISO_AIBAPB_TYPE_GPU_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrIsoAibapbAck
+ */
+#define XLPD_SLCR_ISO_AIBAPB_ACK    ( ( XLPD_SLCR_BASEADDR ) + 0x00003050UL )
+#define XLPD_SLCR_ISO_AIBAPB_ACK_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ISO_AIBAPB_ACK_GPU_SHIFT   0UL
+#define XLPD_SLCR_ISO_AIBAPB_ACK_GPU_WIDTH   1UL
+#define XLPD_SLCR_ISO_AIBAPB_ACK_GPU_MASK    0x00000001UL
+#define XLPD_SLCR_ISO_AIBAPB_ACK_GPU_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAtbIsr
+ */
+#define XLPD_SLCR_ERR_ATB_ISR    ( ( XLPD_SLCR_BASEADDR ) + 0x00006000UL )
+#define XLPD_SLCR_ERR_ATB_ISR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_ATB_ISR_AFIFS2_SHIFT   1UL
+#define XLPD_SLCR_ERR_ATB_ISR_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_ISR_AFIFS2_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_ATB_ISR_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_ATB_ISR_LPDM_SHIFT   0UL
+#define XLPD_SLCR_ERR_ATB_ISR_LPDM_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_ISR_LPDM_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_ATB_ISR_LPDM_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAtbImr
+ */
+#define XLPD_SLCR_ERR_ATB_IMR    ( ( XLPD_SLCR_BASEADDR ) + 0x00006004UL )
+#define XLPD_SLCR_ERR_ATB_IMR_RSTVAL   0x00000003UL
+
+#define XLPD_SLCR_ERR_ATB_IMR_AFIFS2_SHIFT   1UL
+#define XLPD_SLCR_ERR_ATB_IMR_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_IMR_AFIFS2_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_ATB_IMR_AFIFS2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ERR_ATB_IMR_LPDM_SHIFT   0UL
+#define XLPD_SLCR_ERR_ATB_IMR_LPDM_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_IMR_LPDM_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_ATB_IMR_LPDM_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrErrAtbIer
+ */
+#define XLPD_SLCR_ERR_ATB_IER    ( ( XLPD_SLCR_BASEADDR ) + 0x00006008UL )
+#define XLPD_SLCR_ERR_ATB_IER_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_ATB_IER_AFIFS2_SHIFT   1UL
+#define XLPD_SLCR_ERR_ATB_IER_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_IER_AFIFS2_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_ATB_IER_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_ATB_IER_LPDM_SHIFT   0UL
+#define XLPD_SLCR_ERR_ATB_IER_LPDM_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_IER_LPDM_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_ATB_IER_LPDM_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrErrAtbIdr
+ */
+#define XLPD_SLCR_ERR_ATB_IDR    ( ( XLPD_SLCR_BASEADDR ) + 0x0000600CUL )
+#define XLPD_SLCR_ERR_ATB_IDR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ERR_ATB_IDR_AFIFS2_SHIFT   1UL
+#define XLPD_SLCR_ERR_ATB_IDR_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_IDR_AFIFS2_MASK    0x00000002UL
+#define XLPD_SLCR_ERR_ATB_IDR_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ERR_ATB_IDR_LPDM_SHIFT   0UL
+#define XLPD_SLCR_ERR_ATB_IDR_LPDM_WIDTH   1UL
+#define XLPD_SLCR_ERR_ATB_IDR_LPDM_MASK    0x00000001UL
+#define XLPD_SLCR_ERR_ATB_IDR_LPDM_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrAtbCmdStoreEn
+ */
+#define XLPD_SLCR_ATB_CMD_STORE_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x00006010UL )
+#define XLPD_SLCR_ATB_CMD_STORE_EN_RSTVAL   0x00000003UL
+
+#define XLPD_SLCR_ATB_CMD_STORE_EN_AFIFS2_SHIFT   1UL
+#define XLPD_SLCR_ATB_CMD_STORE_EN_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ATB_CMD_STORE_EN_AFIFS2_MASK    0x00000002UL
+#define XLPD_SLCR_ATB_CMD_STORE_EN_AFIFS2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ATB_CMD_STORE_EN_LPDM_SHIFT   0UL
+#define XLPD_SLCR_ATB_CMD_STORE_EN_LPDM_WIDTH   1UL
+#define XLPD_SLCR_ATB_CMD_STORE_EN_LPDM_MASK    0x00000001UL
+#define XLPD_SLCR_ATB_CMD_STORE_EN_LPDM_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrAtbRespEn
+ */
+#define XLPD_SLCR_ATB_RESP_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x00006014UL )
+#define XLPD_SLCR_ATB_RESP_EN_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_ATB_RESP_EN_AFIFS2_SHIFT   1UL
+#define XLPD_SLCR_ATB_RESP_EN_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ATB_RESP_EN_AFIFS2_MASK    0x00000002UL
+#define XLPD_SLCR_ATB_RESP_EN_AFIFS2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ATB_RESP_EN_LPDM_SHIFT   0UL
+#define XLPD_SLCR_ATB_RESP_EN_LPDM_WIDTH   1UL
+#define XLPD_SLCR_ATB_RESP_EN_LPDM_MASK    0x00000001UL
+#define XLPD_SLCR_ATB_RESP_EN_LPDM_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrAtbRespType
+ */
+#define XLPD_SLCR_ATB_RESP_TYPE    ( ( XLPD_SLCR_BASEADDR ) + 0x00006018UL )
+#define XLPD_SLCR_ATB_RESP_TYPE_RSTVAL   0x00000003UL
+
+#define XLPD_SLCR_ATB_RESP_TYPE_AFIFS2_SHIFT   1UL
+#define XLPD_SLCR_ATB_RESP_TYPE_AFIFS2_WIDTH   1UL
+#define XLPD_SLCR_ATB_RESP_TYPE_AFIFS2_MASK    0x00000002UL
+#define XLPD_SLCR_ATB_RESP_TYPE_AFIFS2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_ATB_RESP_TYPE_LPDM_SHIFT   0UL
+#define XLPD_SLCR_ATB_RESP_TYPE_LPDM_WIDTH   1UL
+#define XLPD_SLCR_ATB_RESP_TYPE_LPDM_MASK    0x00000001UL
+#define XLPD_SLCR_ATB_RESP_TYPE_LPDM_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrAtbPrescale
+ */
+#define XLPD_SLCR_ATB_PRESCALE    ( ( XLPD_SLCR_BASEADDR ) + 0x00006020UL )
+#define XLPD_SLCR_ATB_PRESCALE_RSTVAL   0x0000ffffUL
+
+#define XLPD_SLCR_ATB_PRESCALE_EN_SHIFT   16UL
+#define XLPD_SLCR_ATB_PRESCALE_EN_WIDTH   1UL
+#define XLPD_SLCR_ATB_PRESCALE_EN_MASK    0x00010000UL
+#define XLPD_SLCR_ATB_PRESCALE_EN_DEFVAL  0x0UL
+
+#define XLPD_SLCR_ATB_PRESCALE_VAL_SHIFT   0UL
+#define XLPD_SLCR_ATB_PRESCALE_VAL_WIDTH   16UL
+#define XLPD_SLCR_ATB_PRESCALE_VAL_MASK    0x0000ffffUL
+#define XLPD_SLCR_ATB_PRESCALE_VAL_DEFVAL  0xffffUL
+
+/**
+ * Register: XlpdSlcrMutex0
+ */
+#define XLPD_SLCR_MUTEX0    ( ( XLPD_SLCR_BASEADDR ) + 0x00007000UL )
+#define XLPD_SLCR_MUTEX0_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_MUTEX0_ID_SHIFT   0UL
+#define XLPD_SLCR_MUTEX0_ID_WIDTH   32UL
+#define XLPD_SLCR_MUTEX0_ID_MASK    0xffffffffUL
+#define XLPD_SLCR_MUTEX0_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrMutex1
+ */
+#define XLPD_SLCR_MUTEX1    ( ( XLPD_SLCR_BASEADDR ) + 0x00007004UL )
+#define XLPD_SLCR_MUTEX1_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_MUTEX1_ID_SHIFT   0UL
+#define XLPD_SLCR_MUTEX1_ID_WIDTH   32UL
+#define XLPD_SLCR_MUTEX1_ID_MASK    0xffffffffUL
+#define XLPD_SLCR_MUTEX1_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrMutex2
+ */
+#define XLPD_SLCR_MUTEX2    ( ( XLPD_SLCR_BASEADDR ) + 0x00007008UL )
+#define XLPD_SLCR_MUTEX2_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_MUTEX2_ID_SHIFT   0UL
+#define XLPD_SLCR_MUTEX2_ID_WIDTH   32UL
+#define XLPD_SLCR_MUTEX2_ID_MASK    0xffffffffUL
+#define XLPD_SLCR_MUTEX2_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrMutex3
+ */
+#define XLPD_SLCR_MUTEX3    ( ( XLPD_SLCR_BASEADDR ) + 0x0000700CUL )
+#define XLPD_SLCR_MUTEX3_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_MUTEX3_ID_SHIFT   0UL
+#define XLPD_SLCR_MUTEX3_ID_WIDTH   32UL
+#define XLPD_SLCR_MUTEX3_ID_MASK    0xffffffffUL
+#define XLPD_SLCR_MUTEX3_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp0IrqSts
+ */
+#define XLPD_SLCR_GICP0_IRQ_STS    ( ( XLPD_SLCR_BASEADDR ) + 0x00008000UL )
+#define XLPD_SLCR_GICP0_IRQ_STS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP0_IRQ_STS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp0IrqMsk
+ */
+#define XLPD_SLCR_GICP0_IRQ_MSK    ( ( XLPD_SLCR_BASEADDR ) + 0x00008004UL )
+#define XLPD_SLCR_GICP0_IRQ_MSK_RSTVAL   0xffffffffUL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC31_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC30_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC29_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC28_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC27_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC26_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC25_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC24_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC23_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC22_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC21_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC20_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC19_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC18_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC17_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC16_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC15_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC14_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC13_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC12_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC11_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC10_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC9_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC8_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC7_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC6_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC5_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP0_IRQ_MSK_SRC0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrGicp0IrqEn
+ */
+#define XLPD_SLCR_GICP0_IRQ_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x00008008UL )
+#define XLPD_SLCR_GICP0_IRQ_EN_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP0_IRQ_EN_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp0IrqDis
+ */
+#define XLPD_SLCR_GICP0_IRQ_DIS    ( ( XLPD_SLCR_BASEADDR ) + 0x0000800CUL )
+#define XLPD_SLCR_GICP0_IRQ_DIS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP0_IRQ_DIS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp0IrqTrig
+ */
+#define XLPD_SLCR_GICP0_IRQ_TRIG    ( ( XLPD_SLCR_BASEADDR ) + 0x00008010UL )
+#define XLPD_SLCR_GICP0_IRQ_TRIG_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP0_IRQ_TRIG_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp1IrqSts
+ */
+#define XLPD_SLCR_GICP1_IRQ_STS    ( ( XLPD_SLCR_BASEADDR ) + 0x00008014UL )
+#define XLPD_SLCR_GICP1_IRQ_STS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP1_IRQ_STS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp1IrqMsk
+ */
+#define XLPD_SLCR_GICP1_IRQ_MSK    ( ( XLPD_SLCR_BASEADDR ) + 0x00008018UL )
+#define XLPD_SLCR_GICP1_IRQ_MSK_RSTVAL   0xffffffffUL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC31_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC30_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC29_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC28_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC27_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC26_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC25_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC24_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC23_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC22_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC21_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC20_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC19_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC18_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC17_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC16_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC15_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC14_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC13_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC12_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC11_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC10_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC9_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC8_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC7_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC6_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC5_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP1_IRQ_MSK_SRC0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrGicp1IrqEn
+ */
+#define XLPD_SLCR_GICP1_IRQ_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x0000801CUL )
+#define XLPD_SLCR_GICP1_IRQ_EN_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP1_IRQ_EN_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp1IrqDis
+ */
+#define XLPD_SLCR_GICP1_IRQ_DIS    ( ( XLPD_SLCR_BASEADDR ) + 0x00008020UL )
+#define XLPD_SLCR_GICP1_IRQ_DIS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP1_IRQ_DIS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp1IrqTrig
+ */
+#define XLPD_SLCR_GICP1_IRQ_TRIG    ( ( XLPD_SLCR_BASEADDR ) + 0x00008024UL )
+#define XLPD_SLCR_GICP1_IRQ_TRIG_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP1_IRQ_TRIG_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp2IrqSts
+ */
+#define XLPD_SLCR_GICP2_IRQ_STS    ( ( XLPD_SLCR_BASEADDR ) + 0x00008028UL )
+#define XLPD_SLCR_GICP2_IRQ_STS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP2_IRQ_STS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp2IrqMsk
+ */
+#define XLPD_SLCR_GICP2_IRQ_MSK    ( ( XLPD_SLCR_BASEADDR ) + 0x0000802CUL )
+#define XLPD_SLCR_GICP2_IRQ_MSK_RSTVAL   0xffffffffUL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC31_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC30_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC29_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC28_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC27_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC26_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC25_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC24_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC23_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC22_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC21_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC20_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC19_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC18_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC17_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC16_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC15_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC14_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC13_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC12_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC11_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC10_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC9_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC8_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC7_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC6_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC5_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP2_IRQ_MSK_SRC0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrGicp2IrqEn
+ */
+#define XLPD_SLCR_GICP2_IRQ_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x00008030UL )
+#define XLPD_SLCR_GICP2_IRQ_EN_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP2_IRQ_EN_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp2IrqDis
+ */
+#define XLPD_SLCR_GICP2_IRQ_DIS    ( ( XLPD_SLCR_BASEADDR ) + 0x00008034UL )
+#define XLPD_SLCR_GICP2_IRQ_DIS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP2_IRQ_DIS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp2IrqTrig
+ */
+#define XLPD_SLCR_GICP2_IRQ_TRIG    ( ( XLPD_SLCR_BASEADDR ) + 0x00008038UL )
+#define XLPD_SLCR_GICP2_IRQ_TRIG_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP2_IRQ_TRIG_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp3IrqSts
+ */
+#define XLPD_SLCR_GICP3_IRQ_STS    ( ( XLPD_SLCR_BASEADDR ) + 0x0000803CUL )
+#define XLPD_SLCR_GICP3_IRQ_STS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP3_IRQ_STS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp3IrqMsk
+ */
+#define XLPD_SLCR_GICP3_IRQ_MSK    ( ( XLPD_SLCR_BASEADDR ) + 0x00008040UL )
+#define XLPD_SLCR_GICP3_IRQ_MSK_RSTVAL   0xffffffffUL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC31_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC30_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC29_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC28_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC27_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC26_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC25_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC24_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC23_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC22_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC21_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC20_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC19_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC18_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC17_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC16_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC15_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC14_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC13_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC12_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC11_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC10_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC9_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC8_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC7_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC6_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC5_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP3_IRQ_MSK_SRC0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrGicp3IrqEn
+ */
+#define XLPD_SLCR_GICP3_IRQ_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x00008044UL )
+#define XLPD_SLCR_GICP3_IRQ_EN_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP3_IRQ_EN_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp3IrqDis
+ */
+#define XLPD_SLCR_GICP3_IRQ_DIS    ( ( XLPD_SLCR_BASEADDR ) + 0x00008048UL )
+#define XLPD_SLCR_GICP3_IRQ_DIS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP3_IRQ_DIS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp3IrqTrig
+ */
+#define XLPD_SLCR_GICP3_IRQ_TRIG    ( ( XLPD_SLCR_BASEADDR ) + 0x0000804CUL )
+#define XLPD_SLCR_GICP3_IRQ_TRIG_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP3_IRQ_TRIG_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp4IrqSts
+ */
+#define XLPD_SLCR_GICP4_IRQ_STS    ( ( XLPD_SLCR_BASEADDR ) + 0x00008050UL )
+#define XLPD_SLCR_GICP4_IRQ_STS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP4_IRQ_STS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp4IrqMsk
+ */
+#define XLPD_SLCR_GICP4_IRQ_MSK    ( ( XLPD_SLCR_BASEADDR ) + 0x00008054UL )
+#define XLPD_SLCR_GICP4_IRQ_MSK_RSTVAL   0xffffffffUL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC31_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC30_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC29_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC28_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC27_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC26_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC25_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC24_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC23_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC22_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC21_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC20_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC19_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC18_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC17_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC16_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC15_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC14_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC13_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC12_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC11_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC10_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC9_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC8_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC7_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC6_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC5_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP4_IRQ_MSK_SRC0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrGicp4IrqEn
+ */
+#define XLPD_SLCR_GICP4_IRQ_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x00008058UL )
+#define XLPD_SLCR_GICP4_IRQ_EN_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP4_IRQ_EN_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp4IrqDis
+ */
+#define XLPD_SLCR_GICP4_IRQ_DIS    ( ( XLPD_SLCR_BASEADDR ) + 0x0000805CUL )
+#define XLPD_SLCR_GICP4_IRQ_DIS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP4_IRQ_DIS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicp4IrqTrig
+ */
+#define XLPD_SLCR_GICP4_IRQ_TRIG    ( ( XLPD_SLCR_BASEADDR ) + 0x00008060UL )
+#define XLPD_SLCR_GICP4_IRQ_TRIG_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC31_SHIFT   31UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC31_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC31_MASK    0x80000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC31_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC30_SHIFT   30UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC30_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC30_MASK    0x40000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC30_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC29_SHIFT   29UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC29_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC29_MASK    0x20000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC29_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC28_SHIFT   28UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC28_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC28_MASK    0x10000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC28_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC27_SHIFT   27UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC27_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC27_MASK    0x08000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC27_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC26_SHIFT   26UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC26_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC26_MASK    0x04000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC26_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC25_SHIFT   25UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC25_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC25_MASK    0x02000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC25_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC24_SHIFT   24UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC24_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC24_MASK    0x01000000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC24_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC23_SHIFT   23UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC23_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC23_MASK    0x00800000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC23_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC22_SHIFT   22UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC22_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC22_MASK    0x00400000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC22_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC21_SHIFT   21UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC21_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC21_MASK    0x00200000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC21_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC20_SHIFT   20UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC20_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC20_MASK    0x00100000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC20_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC19_SHIFT   19UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC19_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC19_MASK    0x00080000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC19_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC18_SHIFT   18UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC18_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC18_MASK    0x00040000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC18_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC17_SHIFT   17UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC17_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC17_MASK    0x00020000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC17_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC16_SHIFT   16UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC16_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC16_MASK    0x00010000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC16_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC15_SHIFT   15UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC15_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC15_MASK    0x00008000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC14_SHIFT   14UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC14_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC14_MASK    0x00004000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC13_SHIFT   13UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC13_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC13_MASK    0x00002000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC12_SHIFT   12UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC12_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC12_MASK    0x00001000UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC11_SHIFT   11UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC11_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC11_MASK    0x00000800UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC11_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC10_SHIFT   10UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC10_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC10_MASK    0x00000400UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC9_SHIFT   9UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC9_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC9_MASK    0x00000200UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC8_SHIFT   8UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC8_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC8_MASK    0x00000100UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP4_IRQ_TRIG_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicpPmuIrqSts
+ */
+#define XLPD_SLCR_GICP_PMU_IRQ_STS    ( ( XLPD_SLCR_BASEADDR ) + 0x000080A0UL )
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP_PMU_IRQ_STS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicpPmuIrqMsk
+ */
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK    ( ( XLPD_SLCR_BASEADDR ) + 0x000080A4UL )
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_RSTVAL   0x000000ffUL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC7_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC6_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC5_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP_PMU_IRQ_MSK_SRC0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrGicpPmuIrqEn
+ */
+#define XLPD_SLCR_GICP_PMU_IRQ_EN    ( ( XLPD_SLCR_BASEADDR ) + 0x000080A8UL )
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP_PMU_IRQ_EN_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicpPmuIrqDis
+ */
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS    ( ( XLPD_SLCR_BASEADDR ) + 0x000080ACUL )
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP_PMU_IRQ_DIS_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrGicpPmuIrqTrig
+ */
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG    ( ( XLPD_SLCR_BASEADDR ) + 0x000080B0UL )
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC7_SHIFT   7UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC7_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC7_MASK    0x00000080UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC6_SHIFT   6UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC6_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC6_MASK    0x00000040UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC5_SHIFT   5UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC5_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC5_MASK    0x00000020UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC4_SHIFT   4UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC4_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC4_MASK    0x00000010UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC3_SHIFT   3UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC3_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC3_MASK    0x00000008UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC2_SHIFT   2UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC2_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC2_MASK    0x00000004UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC1_SHIFT   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC1_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC1_MASK    0x00000002UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC0_SHIFT   0UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC0_WIDTH   1UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC0_MASK    0x00000001UL
+#define XLPD_SLCR_GICP_PMU_IRQ_TRIG_SRC0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrAfiFs
+ */
+#define XLPD_SLCR_AFI_FS    ( ( XLPD_SLCR_BASEADDR ) + 0x00009000UL )
+#define XLPD_SLCR_AFI_FS_RSTVAL   0x00000200UL
+
+#define XLPD_SLCR_AFI_FS_DW_SS2_SEL_SHIFT   8UL
+#define XLPD_SLCR_AFI_FS_DW_SS2_SEL_WIDTH   2UL
+#define XLPD_SLCR_AFI_FS_DW_SS2_SEL_MASK    0x00000300UL
+#define XLPD_SLCR_AFI_FS_DW_SS2_SEL_DEFVAL  0x2UL
+
+/**
+ * Register: XlpdSlcrCci
+ */
+#define XLPD_SLCR_CCI    ( ( XLPD_SLCR_BASEADDR ) + 0x0000A000UL )
+#define XLPD_SLCR_CCI_RSTVAL   0x03801c07UL
+
+#define XLPD_SLCR_CCI_SPR_SHIFT   28UL
+#define XLPD_SLCR_CCI_SPR_WIDTH   4UL
+#define XLPD_SLCR_CCI_SPR_MASK    0xf0000000UL
+#define XLPD_SLCR_CCI_SPR_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_QVNVNETS4_SHIFT   27UL
+#define XLPD_SLCR_CCI_QVNVNETS4_WIDTH   1UL
+#define XLPD_SLCR_CCI_QVNVNETS4_MASK    0x08000000UL
+#define XLPD_SLCR_CCI_QVNVNETS4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_QVNVNETS3_SHIFT   26UL
+#define XLPD_SLCR_CCI_QVNVNETS3_WIDTH   1UL
+#define XLPD_SLCR_CCI_QVNVNETS3_MASK    0x04000000UL
+#define XLPD_SLCR_CCI_QVNVNETS3_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_QVNVNETS2_SHIFT   25UL
+#define XLPD_SLCR_CCI_QVNVNETS2_WIDTH   1UL
+#define XLPD_SLCR_CCI_QVNVNETS2_MASK    0x02000000UL
+#define XLPD_SLCR_CCI_QVNVNETS2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_QVNVNETS1_SHIFT   24UL
+#define XLPD_SLCR_CCI_QVNVNETS1_WIDTH   1UL
+#define XLPD_SLCR_CCI_QVNVNETS1_MASK    0x01000000UL
+#define XLPD_SLCR_CCI_QVNVNETS1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_QVNVNETS0_SHIFT   23UL
+#define XLPD_SLCR_CCI_QVNVNETS0_WIDTH   1UL
+#define XLPD_SLCR_CCI_QVNVNETS0_MASK    0x00800000UL
+#define XLPD_SLCR_CCI_QVNVNETS0_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_QOS_OVRRD_SHIFT   18UL
+#define XLPD_SLCR_CCI_QOS_OVRRD_WIDTH   5UL
+#define XLPD_SLCR_CCI_QOS_OVRRD_MASK    0x007c0000UL
+#define XLPD_SLCR_CCI_QOS_OVRRD_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_QVN_EN_M2_SHIFT   17UL
+#define XLPD_SLCR_CCI_QVN_EN_M2_WIDTH   1UL
+#define XLPD_SLCR_CCI_QVN_EN_M2_MASK    0x00020000UL
+#define XLPD_SLCR_CCI_QVN_EN_M2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_QVN_EN_M1_SHIFT   16UL
+#define XLPD_SLCR_CCI_QVN_EN_M1_WIDTH   1UL
+#define XLPD_SLCR_CCI_QVN_EN_M1_MASK    0x00010000UL
+#define XLPD_SLCR_CCI_QVN_EN_M1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_STRPG_GRAN_SHIFT   13UL
+#define XLPD_SLCR_CCI_STRPG_GRAN_WIDTH   3UL
+#define XLPD_SLCR_CCI_STRPG_GRAN_MASK    0x0000e000UL
+#define XLPD_SLCR_CCI_STRPG_GRAN_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ACCHNLLEN4_SHIFT   12UL
+#define XLPD_SLCR_CCI_ACCHNLLEN4_WIDTH   1UL
+#define XLPD_SLCR_CCI_ACCHNLLEN4_MASK    0x00001000UL
+#define XLPD_SLCR_CCI_ACCHNLLEN4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_ACCHNLLEN3_SHIFT   11UL
+#define XLPD_SLCR_CCI_ACCHNLLEN3_WIDTH   1UL
+#define XLPD_SLCR_CCI_ACCHNLLEN3_MASK    0x00000800UL
+#define XLPD_SLCR_CCI_ACCHNLLEN3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_ACCHNLLEN0_SHIFT   10UL
+#define XLPD_SLCR_CCI_ACCHNLLEN0_WIDTH   1UL
+#define XLPD_SLCR_CCI_ACCHNLLEN0_MASK    0x00000400UL
+#define XLPD_SLCR_CCI_ACCHNLLEN0_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_ECOREVNUM_SHIFT   6UL
+#define XLPD_SLCR_CCI_ECOREVNUM_WIDTH   4UL
+#define XLPD_SLCR_CCI_ECOREVNUM_MASK    0x000003c0UL
+#define XLPD_SLCR_CCI_ECOREVNUM_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ASA2_SHIFT   5UL
+#define XLPD_SLCR_CCI_ASA2_WIDTH   1UL
+#define XLPD_SLCR_CCI_ASA2_MASK    0x00000020UL
+#define XLPD_SLCR_CCI_ASA2_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ASA1_SHIFT   4UL
+#define XLPD_SLCR_CCI_ASA1_WIDTH   1UL
+#define XLPD_SLCR_CCI_ASA1_MASK    0x00000010UL
+#define XLPD_SLCR_CCI_ASA1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ASA0_SHIFT   3UL
+#define XLPD_SLCR_CCI_ASA0_WIDTH   1UL
+#define XLPD_SLCR_CCI_ASA0_MASK    0x00000008UL
+#define XLPD_SLCR_CCI_ASA0_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_OWO2_SHIFT   2UL
+#define XLPD_SLCR_CCI_OWO2_WIDTH   1UL
+#define XLPD_SLCR_CCI_OWO2_MASK    0x00000004UL
+#define XLPD_SLCR_CCI_OWO2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_OWO1_SHIFT   1UL
+#define XLPD_SLCR_CCI_OWO1_WIDTH   1UL
+#define XLPD_SLCR_CCI_OWO1_MASK    0x00000002UL
+#define XLPD_SLCR_CCI_OWO1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_CCI_OWO0_SHIFT   0UL
+#define XLPD_SLCR_CCI_OWO0_WIDTH   1UL
+#define XLPD_SLCR_CCI_OWO0_MASK    0x00000001UL
+#define XLPD_SLCR_CCI_OWO0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrCciAddrmap
+ */
+#define XLPD_SLCR_CCI_ADDRMAP    ( ( XLPD_SLCR_BASEADDR ) + 0x0000A004UL )
+#define XLPD_SLCR_CCI_ADDRMAP_RSTVAL   0x00c000ffUL
+
+#define XLPD_SLCR_CCI_ADDRMAP_15_SHIFT   30UL
+#define XLPD_SLCR_CCI_ADDRMAP_15_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_15_MASK    0xc0000000UL
+#define XLPD_SLCR_CCI_ADDRMAP_15_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_14_SHIFT   28UL
+#define XLPD_SLCR_CCI_ADDRMAP_14_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_14_MASK    0x30000000UL
+#define XLPD_SLCR_CCI_ADDRMAP_14_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_13_SHIFT   26UL
+#define XLPD_SLCR_CCI_ADDRMAP_13_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_13_MASK    0x0c000000UL
+#define XLPD_SLCR_CCI_ADDRMAP_13_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_12_SHIFT   24UL
+#define XLPD_SLCR_CCI_ADDRMAP_12_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_12_MASK    0x03000000UL
+#define XLPD_SLCR_CCI_ADDRMAP_12_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_11_SHIFT   22UL
+#define XLPD_SLCR_CCI_ADDRMAP_11_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_11_MASK    0x00c00000UL
+#define XLPD_SLCR_CCI_ADDRMAP_11_DEFVAL  0x3UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_10_SHIFT   20UL
+#define XLPD_SLCR_CCI_ADDRMAP_10_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_10_MASK    0x00300000UL
+#define XLPD_SLCR_CCI_ADDRMAP_10_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_9_SHIFT   18UL
+#define XLPD_SLCR_CCI_ADDRMAP_9_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_9_MASK    0x000c0000UL
+#define XLPD_SLCR_CCI_ADDRMAP_9_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_8_SHIFT   16UL
+#define XLPD_SLCR_CCI_ADDRMAP_8_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_8_MASK    0x00030000UL
+#define XLPD_SLCR_CCI_ADDRMAP_8_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_7_SHIFT   14UL
+#define XLPD_SLCR_CCI_ADDRMAP_7_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_7_MASK    0x0000c000UL
+#define XLPD_SLCR_CCI_ADDRMAP_7_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_6_SHIFT   12UL
+#define XLPD_SLCR_CCI_ADDRMAP_6_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_6_MASK    0x00003000UL
+#define XLPD_SLCR_CCI_ADDRMAP_6_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_5_SHIFT   10UL
+#define XLPD_SLCR_CCI_ADDRMAP_5_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_5_MASK    0x00000c00UL
+#define XLPD_SLCR_CCI_ADDRMAP_5_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_4_SHIFT   8UL
+#define XLPD_SLCR_CCI_ADDRMAP_4_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_4_MASK    0x00000300UL
+#define XLPD_SLCR_CCI_ADDRMAP_4_DEFVAL  0x0UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_3_SHIFT   6UL
+#define XLPD_SLCR_CCI_ADDRMAP_3_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_3_MASK    0x000000c0UL
+#define XLPD_SLCR_CCI_ADDRMAP_3_DEFVAL  0x3UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_2_SHIFT   4UL
+#define XLPD_SLCR_CCI_ADDRMAP_2_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_2_MASK    0x00000030UL
+#define XLPD_SLCR_CCI_ADDRMAP_2_DEFVAL  0x3UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_1_SHIFT   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_1_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_1_MASK    0x0000000cUL
+#define XLPD_SLCR_CCI_ADDRMAP_1_DEFVAL  0x3UL
+
+#define XLPD_SLCR_CCI_ADDRMAP_0_SHIFT   0UL
+#define XLPD_SLCR_CCI_ADDRMAP_0_WIDTH   2UL
+#define XLPD_SLCR_CCI_ADDRMAP_0_MASK    0x00000003UL
+#define XLPD_SLCR_CCI_ADDRMAP_0_DEFVAL  0x3UL
+
+/**
+ * Register: XlpdSlcrCciQvnprealloc
+ */
+#define XLPD_SLCR_CCI_QVNPREALLOC    ( ( XLPD_SLCR_BASEADDR ) + 0x0000A008UL )
+#define XLPD_SLCR_CCI_QVNPREALLOC_RSTVAL   0x00330330UL
+
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM2_SHIFT   20UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM2_WIDTH   4UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM2_MASK    0x00f00000UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM2_DEFVAL  0x3UL
+
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM1_SHIFT   16UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM1_WIDTH   4UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM1_MASK    0x000f0000UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_WM1_DEFVAL  0x3UL
+
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM2_SHIFT   8UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM2_WIDTH   4UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM2_MASK    0x00000f00UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM2_DEFVAL  0x3UL
+
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM1_SHIFT   4UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM1_WIDTH   4UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM1_MASK    0x000000f0UL
+#define XLPD_SLCR_CCI_QVNPREALLOC_RM1_DEFVAL  0x3UL
+
+/**
+ * Register: XlpdSlcrSmmu
+ */
+#define XLPD_SLCR_SMMU    ( ( XLPD_SLCR_BASEADDR ) + 0x0000A020UL )
+#define XLPD_SLCR_SMMU_RSTVAL   0x0000003fUL
+
+#define XLPD_SLCR_SMMU_INTG_SEC_OVRRDE_SHIFT   7UL
+#define XLPD_SLCR_SMMU_INTG_SEC_OVRRDE_WIDTH   1UL
+#define XLPD_SLCR_SMMU_INTG_SEC_OVRRDE_MASK    0x00000080UL
+#define XLPD_SLCR_SMMU_INTG_SEC_OVRRDE_DEFVAL  0x0UL
+
+#define XLPD_SLCR_SMMU_CTTW_SHIFT   6UL
+#define XLPD_SLCR_SMMU_CTTW_WIDTH   1UL
+#define XLPD_SLCR_SMMU_CTTW_MASK    0x00000040UL
+#define XLPD_SLCR_SMMU_CTTW_DEFVAL  0x0UL
+
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU5_SHIFT   5UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU5_WIDTH   1UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU5_MASK    0x00000020UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU5_DEFVAL  0x1UL
+
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU4_SHIFT   4UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU4_WIDTH   1UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU4_MASK    0x00000010UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU4_DEFVAL  0x1UL
+
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU3_SHIFT   3UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU3_WIDTH   1UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU3_MASK    0x00000008UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU3_DEFVAL  0x1UL
+
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU2_SHIFT   2UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU2_WIDTH   1UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU2_MASK    0x00000004UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU2_DEFVAL  0x1UL
+
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU1_SHIFT   1UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU1_WIDTH   1UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU1_MASK    0x00000002UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU0_SHIFT   0UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU0_WIDTH   1UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU0_MASK    0x00000001UL
+#define XLPD_SLCR_SMMU_SYSBARDIS_TBU0_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrApu
+ */
+#define XLPD_SLCR_APU    ( ( XLPD_SLCR_BASEADDR ) + 0x0000A040UL )
+#define XLPD_SLCR_APU_RSTVAL   0x00000001UL
+
+#define XLPD_SLCR_APU_BRDC_BARRIER_SHIFT   3UL
+#define XLPD_SLCR_APU_BRDC_BARRIER_WIDTH   1UL
+#define XLPD_SLCR_APU_BRDC_BARRIER_MASK    0x00000008UL
+#define XLPD_SLCR_APU_BRDC_BARRIER_DEFVAL  0x0UL
+
+#define XLPD_SLCR_APU_BRDC_CMNT_SHIFT   2UL
+#define XLPD_SLCR_APU_BRDC_CMNT_WIDTH   1UL
+#define XLPD_SLCR_APU_BRDC_CMNT_MASK    0x00000004UL
+#define XLPD_SLCR_APU_BRDC_CMNT_DEFVAL  0x0UL
+
+#define XLPD_SLCR_APU_BRDC_INNER_SHIFT   1UL
+#define XLPD_SLCR_APU_BRDC_INNER_WIDTH   1UL
+#define XLPD_SLCR_APU_BRDC_INNER_MASK    0x00000002UL
+#define XLPD_SLCR_APU_BRDC_INNER_DEFVAL  0x0UL
+
+#define XLPD_SLCR_APU_BRDC_OUTER_SHIFT   0UL
+#define XLPD_SLCR_APU_BRDC_OUTER_WIDTH   1UL
+#define XLPD_SLCR_APU_BRDC_OUTER_MASK    0x00000001UL
+#define XLPD_SLCR_APU_BRDC_OUTER_DEFVAL  0x1UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XLPD_SLCR_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_slcr_secure.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_slcr_secure.h
new file mode 100644
index 000000000..aff3bf2fa
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_slcr_secure.h
@@ -0,0 +1,141 @@
+/* ### HEADER ### */
+
+#ifndef __XLPD_SLCR_SECURE_H__
+#define __XLPD_SLCR_SECURE_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XlpdSlcrSecure Base Address
+ */
+#define XLPD_SLCR_SECURE_BASEADDR      0xFF4B0000UL
+
+/**
+ * Register: XlpdSlcrSecCtrl
+ */
+#define XLPD_SLCR_SEC_CTRL    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000004UL )
+#define XLPD_SLCR_SEC_CTRL_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_CTRL_SLVERR_EN_SHIFT   0UL
+#define XLPD_SLCR_SEC_CTRL_SLVERR_EN_WIDTH   1UL
+#define XLPD_SLCR_SEC_CTRL_SLVERR_EN_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_CTRL_SLVERR_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecIsr
+ */
+#define XLPD_SLCR_SEC_ISR    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000008UL )
+#define XLPD_SLCR_SEC_ISR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_ISR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_SEC_ISR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_SEC_ISR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_ISR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecImr
+ */
+#define XLPD_SLCR_SEC_IMR    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x0000000CUL )
+#define XLPD_SLCR_SEC_IMR_RSTVAL   0x00000001UL
+
+#define XLPD_SLCR_SEC_IMR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_SEC_IMR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_SEC_IMR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_IMR_ADDR_DECD_ERR_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdSlcrSecIer
+ */
+#define XLPD_SLCR_SEC_IER    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000010UL )
+#define XLPD_SLCR_SEC_IER_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_IER_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_SEC_IER_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_SEC_IER_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_IER_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecIdr
+ */
+#define XLPD_SLCR_SEC_IDR    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000014UL )
+#define XLPD_SLCR_SEC_IDR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_IDR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_SEC_IDR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_SEC_IDR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_IDR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecItr
+ */
+#define XLPD_SLCR_SEC_ITR    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000018UL )
+#define XLPD_SLCR_SEC_ITR_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_ITR_ADDR_DECD_ERR_SHIFT   0UL
+#define XLPD_SLCR_SEC_ITR_ADDR_DECD_ERR_WIDTH   1UL
+#define XLPD_SLCR_SEC_ITR_ADDR_DECD_ERR_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_ITR_ADDR_DECD_ERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecRpu
+ */
+#define XLPD_SLCR_SEC_RPU    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000020UL )
+#define XLPD_SLCR_SEC_RPU_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_RPU_TZ_R5_1_SHIFT   1UL
+#define XLPD_SLCR_SEC_RPU_TZ_R5_1_WIDTH   1UL
+#define XLPD_SLCR_SEC_RPU_TZ_R5_1_MASK    0x00000002UL
+#define XLPD_SLCR_SEC_RPU_TZ_R5_1_DEFVAL  0x0UL
+
+#define XLPD_SLCR_SEC_RPU_TZ_R5_0_SHIFT   0UL
+#define XLPD_SLCR_SEC_RPU_TZ_R5_0_WIDTH   1UL
+#define XLPD_SLCR_SEC_RPU_TZ_R5_0_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_RPU_TZ_R5_0_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecAdma
+ */
+#define XLPD_SLCR_SEC_ADMA    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000024UL )
+#define XLPD_SLCR_SEC_ADMA_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_ADMA_TZ_SHIFT   0UL
+#define XLPD_SLCR_SEC_ADMA_TZ_WIDTH   8UL
+#define XLPD_SLCR_SEC_ADMA_TZ_MASK    0x000000ffUL
+#define XLPD_SLCR_SEC_ADMA_TZ_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecSafetyChk
+ */
+#define XLPD_SLCR_SEC_SAFETY_CHK    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000030UL )
+#define XLPD_SLCR_SEC_SAFETY_CHK_RSTVAL   0x00000000UL
+
+#define XLPD_SLCR_SEC_SAFETY_CHK_VAL_SHIFT   0UL
+#define XLPD_SLCR_SEC_SAFETY_CHK_VAL_WIDTH   32UL
+#define XLPD_SLCR_SEC_SAFETY_CHK_VAL_MASK    0xffffffffUL
+#define XLPD_SLCR_SEC_SAFETY_CHK_VAL_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdSlcrSecUsb
+ */
+#define XLPD_SLCR_SEC_USB    ( ( XLPD_SLCR_SECURE_BASEADDR ) + 0x00000034UL )
+#define XLPD_SLCR_SEC_USB_RSTVAL   0x00000003UL
+
+#define XLPD_SLCR_SEC_USB_TZ_USB3_1_SHIFT   1UL
+#define XLPD_SLCR_SEC_USB_TZ_USB3_1_WIDTH   1UL
+#define XLPD_SLCR_SEC_USB_TZ_USB3_1_MASK    0x00000002UL
+#define XLPD_SLCR_SEC_USB_TZ_USB3_1_DEFVAL  0x1UL
+
+#define XLPD_SLCR_SEC_USB_TZ_USB3_0_SHIFT   0UL
+#define XLPD_SLCR_SEC_USB_TZ_USB3_0_WIDTH   1UL
+#define XLPD_SLCR_SEC_USB_TZ_USB3_0_MASK    0x00000001UL
+#define XLPD_SLCR_SEC_USB_TZ_USB3_0_DEFVAL  0x1UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XLPD_SLCR_SECURE_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_xppu.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_xppu.h
new file mode 100644
index 000000000..a5145eac7
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_xppu.h
@@ -0,0 +1,858 @@
+/* ### HEADER ### */
+
+#ifndef __XLPD_XPPU_H__
+#define __XLPD_XPPU_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XlpdXppu Base Address
+ */
+#define XLPD_XPPU_BASEADDR      0xFF980000UL
+
+/**
+ * Register: XlpdXppuCtrl
+ */
+#define XLPD_XPPU_CTRL    ( ( XLPD_XPPU_BASEADDR ) + 0x00000000UL )
+#define XLPD_XPPU_CTRL_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_CTRL_APER_PARITY_EN_SHIFT   2UL
+#define XLPD_XPPU_CTRL_APER_PARITY_EN_WIDTH   1UL
+#define XLPD_XPPU_CTRL_APER_PARITY_EN_MASK    0x00000004UL
+#define XLPD_XPPU_CTRL_APER_PARITY_EN_DEFVAL  0x0UL
+
+#define XLPD_XPPU_CTRL_MID_PARITY_EN_SHIFT   1UL
+#define XLPD_XPPU_CTRL_MID_PARITY_EN_WIDTH   1UL
+#define XLPD_XPPU_CTRL_MID_PARITY_EN_MASK    0x00000002UL
+#define XLPD_XPPU_CTRL_MID_PARITY_EN_DEFVAL  0x0UL
+
+#define XLPD_XPPU_CTRL_EN_SHIFT   0UL
+#define XLPD_XPPU_CTRL_EN_WIDTH   1UL
+#define XLPD_XPPU_CTRL_EN_MASK    0x00000001UL
+#define XLPD_XPPU_CTRL_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuErrSts1
+ */
+#define XLPD_XPPU_ERR_STS1    ( ( XLPD_XPPU_BASEADDR ) + 0x00000004UL )
+#define XLPD_XPPU_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XLPD_XPPU_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XLPD_XPPU_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XLPD_XPPU_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuErrSts2
+ */
+#define XLPD_XPPU_ERR_STS2    ( ( XLPD_XPPU_BASEADDR ) + 0x00000008UL )
+#define XLPD_XPPU_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XLPD_XPPU_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XLPD_XPPU_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XLPD_XPPU_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuPoison
+ */
+#define XLPD_XPPU_POISON    ( ( XLPD_XPPU_BASEADDR ) + 0x0000000CUL )
+#define XLPD_XPPU_POISON_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_POISON_BASE_SHIFT   0UL
+#define XLPD_XPPU_POISON_BASE_WIDTH   20UL
+#define XLPD_XPPU_POISON_BASE_MASK    0x000fffffUL
+#define XLPD_XPPU_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuIsr
+ */
+#define XLPD_XPPU_ISR    ( ( XLPD_XPPU_BASEADDR ) + 0x00000010UL )
+#define XLPD_XPPU_ISR_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_ISR_APER_PARITY_SHIFT   7UL
+#define XLPD_XPPU_ISR_APER_PARITY_WIDTH   1UL
+#define XLPD_XPPU_ISR_APER_PARITY_MASK    0x00000080UL
+#define XLPD_XPPU_ISR_APER_PARITY_DEFVAL  0x0UL
+
+#define XLPD_XPPU_ISR_APER_TZ_SHIFT   6UL
+#define XLPD_XPPU_ISR_APER_TZ_WIDTH   1UL
+#define XLPD_XPPU_ISR_APER_TZ_MASK    0x00000040UL
+#define XLPD_XPPU_ISR_APER_TZ_DEFVAL  0x0UL
+
+#define XLPD_XPPU_ISR_APER_PERM_SHIFT   5UL
+#define XLPD_XPPU_ISR_APER_PERM_WIDTH   1UL
+#define XLPD_XPPU_ISR_APER_PERM_MASK    0x00000020UL
+#define XLPD_XPPU_ISR_APER_PERM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_ISR_MID_PARITY_SHIFT   3UL
+#define XLPD_XPPU_ISR_MID_PARITY_WIDTH   1UL
+#define XLPD_XPPU_ISR_MID_PARITY_MASK    0x00000008UL
+#define XLPD_XPPU_ISR_MID_PARITY_DEFVAL  0x0UL
+
+#define XLPD_XPPU_ISR_MID_RO_SHIFT   2UL
+#define XLPD_XPPU_ISR_MID_RO_WIDTH   1UL
+#define XLPD_XPPU_ISR_MID_RO_MASK    0x00000004UL
+#define XLPD_XPPU_ISR_MID_RO_DEFVAL  0x0UL
+
+#define XLPD_XPPU_ISR_MID_MISS_SHIFT   1UL
+#define XLPD_XPPU_ISR_MID_MISS_WIDTH   1UL
+#define XLPD_XPPU_ISR_MID_MISS_MASK    0x00000002UL
+#define XLPD_XPPU_ISR_MID_MISS_DEFVAL  0x0UL
+
+#define XLPD_XPPU_ISR_INV_APB_SHIFT   0UL
+#define XLPD_XPPU_ISR_INV_APB_WIDTH   1UL
+#define XLPD_XPPU_ISR_INV_APB_MASK    0x00000001UL
+#define XLPD_XPPU_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuImr
+ */
+#define XLPD_XPPU_IMR    ( ( XLPD_XPPU_BASEADDR ) + 0x00000014UL )
+#define XLPD_XPPU_IMR_RSTVAL   0x000000efUL
+
+#define XLPD_XPPU_IMR_APER_PARITY_SHIFT   7UL
+#define XLPD_XPPU_IMR_APER_PARITY_WIDTH   1UL
+#define XLPD_XPPU_IMR_APER_PARITY_MASK    0x00000080UL
+#define XLPD_XPPU_IMR_APER_PARITY_DEFVAL  0x1UL
+
+#define XLPD_XPPU_IMR_APER_TZ_SHIFT   6UL
+#define XLPD_XPPU_IMR_APER_TZ_WIDTH   1UL
+#define XLPD_XPPU_IMR_APER_TZ_MASK    0x00000040UL
+#define XLPD_XPPU_IMR_APER_TZ_DEFVAL  0x1UL
+
+#define XLPD_XPPU_IMR_APER_PERM_SHIFT   5UL
+#define XLPD_XPPU_IMR_APER_PERM_WIDTH   1UL
+#define XLPD_XPPU_IMR_APER_PERM_MASK    0x00000020UL
+#define XLPD_XPPU_IMR_APER_PERM_DEFVAL  0x1UL
+
+#define XLPD_XPPU_IMR_MID_PARITY_SHIFT   3UL
+#define XLPD_XPPU_IMR_MID_PARITY_WIDTH   1UL
+#define XLPD_XPPU_IMR_MID_PARITY_MASK    0x00000008UL
+#define XLPD_XPPU_IMR_MID_PARITY_DEFVAL  0x1UL
+
+#define XLPD_XPPU_IMR_MID_RO_SHIFT   2UL
+#define XLPD_XPPU_IMR_MID_RO_WIDTH   1UL
+#define XLPD_XPPU_IMR_MID_RO_MASK    0x00000004UL
+#define XLPD_XPPU_IMR_MID_RO_DEFVAL  0x1UL
+
+#define XLPD_XPPU_IMR_MID_MISS_SHIFT   1UL
+#define XLPD_XPPU_IMR_MID_MISS_WIDTH   1UL
+#define XLPD_XPPU_IMR_MID_MISS_MASK    0x00000002UL
+#define XLPD_XPPU_IMR_MID_MISS_DEFVAL  0x1UL
+
+#define XLPD_XPPU_IMR_INV_APB_SHIFT   0UL
+#define XLPD_XPPU_IMR_INV_APB_WIDTH   1UL
+#define XLPD_XPPU_IMR_INV_APB_MASK    0x00000001UL
+#define XLPD_XPPU_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdXppuIen
+ */
+#define XLPD_XPPU_IEN    ( ( XLPD_XPPU_BASEADDR ) + 0x00000018UL )
+#define XLPD_XPPU_IEN_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_IEN_APER_PARITY_SHIFT   7UL
+#define XLPD_XPPU_IEN_APER_PARITY_WIDTH   1UL
+#define XLPD_XPPU_IEN_APER_PARITY_MASK    0x00000080UL
+#define XLPD_XPPU_IEN_APER_PARITY_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IEN_APER_TZ_SHIFT   6UL
+#define XLPD_XPPU_IEN_APER_TZ_WIDTH   1UL
+#define XLPD_XPPU_IEN_APER_TZ_MASK    0x00000040UL
+#define XLPD_XPPU_IEN_APER_TZ_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IEN_APER_PERM_SHIFT   5UL
+#define XLPD_XPPU_IEN_APER_PERM_WIDTH   1UL
+#define XLPD_XPPU_IEN_APER_PERM_MASK    0x00000020UL
+#define XLPD_XPPU_IEN_APER_PERM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IEN_MID_PARITY_SHIFT   3UL
+#define XLPD_XPPU_IEN_MID_PARITY_WIDTH   1UL
+#define XLPD_XPPU_IEN_MID_PARITY_MASK    0x00000008UL
+#define XLPD_XPPU_IEN_MID_PARITY_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IEN_MID_RO_SHIFT   2UL
+#define XLPD_XPPU_IEN_MID_RO_WIDTH   1UL
+#define XLPD_XPPU_IEN_MID_RO_MASK    0x00000004UL
+#define XLPD_XPPU_IEN_MID_RO_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IEN_MID_MISS_SHIFT   1UL
+#define XLPD_XPPU_IEN_MID_MISS_WIDTH   1UL
+#define XLPD_XPPU_IEN_MID_MISS_MASK    0x00000002UL
+#define XLPD_XPPU_IEN_MID_MISS_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IEN_INV_APB_SHIFT   0UL
+#define XLPD_XPPU_IEN_INV_APB_WIDTH   1UL
+#define XLPD_XPPU_IEN_INV_APB_MASK    0x00000001UL
+#define XLPD_XPPU_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuIds
+ */
+#define XLPD_XPPU_IDS    ( ( XLPD_XPPU_BASEADDR ) + 0x0000001CUL )
+#define XLPD_XPPU_IDS_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_IDS_APER_PARITY_SHIFT   7UL
+#define XLPD_XPPU_IDS_APER_PARITY_WIDTH   1UL
+#define XLPD_XPPU_IDS_APER_PARITY_MASK    0x00000080UL
+#define XLPD_XPPU_IDS_APER_PARITY_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IDS_APER_TZ_SHIFT   6UL
+#define XLPD_XPPU_IDS_APER_TZ_WIDTH   1UL
+#define XLPD_XPPU_IDS_APER_TZ_MASK    0x00000040UL
+#define XLPD_XPPU_IDS_APER_TZ_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IDS_APER_PERM_SHIFT   5UL
+#define XLPD_XPPU_IDS_APER_PERM_WIDTH   1UL
+#define XLPD_XPPU_IDS_APER_PERM_MASK    0x00000020UL
+#define XLPD_XPPU_IDS_APER_PERM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IDS_MID_PARITY_SHIFT   3UL
+#define XLPD_XPPU_IDS_MID_PARITY_WIDTH   1UL
+#define XLPD_XPPU_IDS_MID_PARITY_MASK    0x00000008UL
+#define XLPD_XPPU_IDS_MID_PARITY_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IDS_MID_RO_SHIFT   2UL
+#define XLPD_XPPU_IDS_MID_RO_WIDTH   1UL
+#define XLPD_XPPU_IDS_MID_RO_MASK    0x00000004UL
+#define XLPD_XPPU_IDS_MID_RO_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IDS_MID_MISS_SHIFT   1UL
+#define XLPD_XPPU_IDS_MID_MISS_WIDTH   1UL
+#define XLPD_XPPU_IDS_MID_MISS_MASK    0x00000002UL
+#define XLPD_XPPU_IDS_MID_MISS_DEFVAL  0x0UL
+
+#define XLPD_XPPU_IDS_INV_APB_SHIFT   0UL
+#define XLPD_XPPU_IDS_INV_APB_WIDTH   1UL
+#define XLPD_XPPU_IDS_INV_APB_MASK    0x00000001UL
+#define XLPD_XPPU_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMMstrIds
+ */
+#define XLPD_XPPU_M_MSTR_IDS    ( ( XLPD_XPPU_BASEADDR ) + 0x0000003CUL )
+#define XLPD_XPPU_M_MSTR_IDS_RSTVAL   0x00000014UL
+
+#define XLPD_XPPU_M_MSTR_IDS_NO_SHIFT   0UL
+#define XLPD_XPPU_M_MSTR_IDS_NO_WIDTH   32UL
+#define XLPD_XPPU_M_MSTR_IDS_NO_MASK    0xffffffffUL
+#define XLPD_XPPU_M_MSTR_IDS_NO_DEFVAL  0x14UL
+
+/**
+ * Register: XlpdXppuMAperture32b
+ */
+#define XLPD_XPPU_M_APERTURE_32B    ( ( XLPD_XPPU_BASEADDR ) + 0x00000040UL )
+#define XLPD_XPPU_M_APERTURE_32B_RSTVAL   0x00000080UL
+
+#define XLPD_XPPU_M_APERTURE_32B_NO_SHIFT   0UL
+#define XLPD_XPPU_M_APERTURE_32B_NO_WIDTH   32UL
+#define XLPD_XPPU_M_APERTURE_32B_NO_MASK    0xffffffffUL
+#define XLPD_XPPU_M_APERTURE_32B_NO_DEFVAL  0x80UL
+
+/**
+ * Register: XlpdXppuMAperture64kb
+ */
+#define XLPD_XPPU_M_APERTURE_64KB    ( ( XLPD_XPPU_BASEADDR ) + 0x00000044UL )
+#define XLPD_XPPU_M_APERTURE_64KB_RSTVAL   0x00000100UL
+
+#define XLPD_XPPU_M_APERTURE_64KB_NO_SHIFT   0UL
+#define XLPD_XPPU_M_APERTURE_64KB_NO_WIDTH   32UL
+#define XLPD_XPPU_M_APERTURE_64KB_NO_MASK    0xffffffffUL
+#define XLPD_XPPU_M_APERTURE_64KB_NO_DEFVAL  0x100UL
+
+/**
+ * Register: XlpdXppuMAperture1mb
+ */
+#define XLPD_XPPU_M_APERTURE_1MB    ( ( XLPD_XPPU_BASEADDR ) + 0x00000048UL )
+#define XLPD_XPPU_M_APERTURE_1MB_RSTVAL   0x00000010UL
+
+#define XLPD_XPPU_M_APERTURE_1MB_NO_SHIFT   0UL
+#define XLPD_XPPU_M_APERTURE_1MB_NO_WIDTH   32UL
+#define XLPD_XPPU_M_APERTURE_1MB_NO_MASK    0xffffffffUL
+#define XLPD_XPPU_M_APERTURE_1MB_NO_DEFVAL  0x10UL
+
+/**
+ * Register: XlpdXppuMAperture512mb
+ */
+#define XLPD_XPPU_M_APERTURE_512MB    ( ( XLPD_XPPU_BASEADDR ) + 0x0000004CUL )
+#define XLPD_XPPU_M_APERTURE_512MB_RSTVAL   0x00000001UL
+
+#define XLPD_XPPU_M_APERTURE_512MB_NO_SHIFT   0UL
+#define XLPD_XPPU_M_APERTURE_512MB_NO_WIDTH   32UL
+#define XLPD_XPPU_M_APERTURE_512MB_NO_MASK    0xffffffffUL
+#define XLPD_XPPU_M_APERTURE_512MB_NO_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdXppuBase32b
+ */
+#define XLPD_XPPU_BASE_32B    ( ( XLPD_XPPU_BASEADDR ) + 0x00000050UL )
+#define XLPD_XPPU_BASE_32B_RSTVAL   0xff990000UL
+
+#define XLPD_XPPU_BASE_32B_ADDR_SHIFT   0UL
+#define XLPD_XPPU_BASE_32B_ADDR_WIDTH   32UL
+#define XLPD_XPPU_BASE_32B_ADDR_MASK    0xffffffffUL
+#define XLPD_XPPU_BASE_32B_ADDR_DEFVAL  0xff990000UL
+
+/**
+ * Register: XlpdXppuBase64kb
+ */
+#define XLPD_XPPU_BASE_64KB    ( ( XLPD_XPPU_BASEADDR ) + 0x00000054UL )
+#define XLPD_XPPU_BASE_64KB_RSTVAL   0xff000000UL
+
+#define XLPD_XPPU_BASE_64KB_ADDR_SHIFT   0UL
+#define XLPD_XPPU_BASE_64KB_ADDR_WIDTH   32UL
+#define XLPD_XPPU_BASE_64KB_ADDR_MASK    0xffffffffUL
+#define XLPD_XPPU_BASE_64KB_ADDR_DEFVAL  0xff000000UL
+
+/**
+ * Register: XlpdXppuBase1mb
+ */
+#define XLPD_XPPU_BASE_1MB    ( ( XLPD_XPPU_BASEADDR ) + 0x00000058UL )
+#define XLPD_XPPU_BASE_1MB_RSTVAL   0xfe000000UL
+
+#define XLPD_XPPU_BASE_1MB_ADDR_SHIFT   0UL
+#define XLPD_XPPU_BASE_1MB_ADDR_WIDTH   32UL
+#define XLPD_XPPU_BASE_1MB_ADDR_MASK    0xffffffffUL
+#define XLPD_XPPU_BASE_1MB_ADDR_DEFVAL  0xfe000000UL
+
+/**
+ * Register: XlpdXppuBase512mb
+ */
+#define XLPD_XPPU_BASE_512MB    ( ( XLPD_XPPU_BASEADDR ) + 0x0000005CUL )
+#define XLPD_XPPU_BASE_512MB_RSTVAL   0xc0000000UL
+
+#define XLPD_XPPU_BASE_512MB_ADDR_SHIFT   0UL
+#define XLPD_XPPU_BASE_512MB_ADDR_WIDTH   32UL
+#define XLPD_XPPU_BASE_512MB_ADDR_MASK    0xffffffffUL
+#define XLPD_XPPU_BASE_512MB_ADDR_DEFVAL  0xc0000000UL
+
+/**
+ * Register: XlpdXppuMstrId00
+ */
+#define XLPD_XPPU_MSTR_ID00    ( ( XLPD_XPPU_BASEADDR ) + 0x00000100UL )
+#define XLPD_XPPU_MSTR_ID00_RSTVAL   0x83ff0040UL
+
+#define XLPD_XPPU_MSTR_ID00_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID00_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID00_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID00_MIDP_DEFVAL  0x1UL
+
+#define XLPD_XPPU_MSTR_ID00_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID00_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID00_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID00_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID00_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID00_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID00_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID00_MIDM_DEFVAL  0x3ffUL
+
+#define XLPD_XPPU_MSTR_ID00_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID00_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID00_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID00_MID_DEFVAL  0x40UL
+
+/**
+ * Register: XlpdXppuMstrId01
+ */
+#define XLPD_XPPU_MSTR_ID01    ( ( XLPD_XPPU_BASEADDR ) + 0x00000104UL )
+#define XLPD_XPPU_MSTR_ID01_RSTVAL   0x03f00000UL
+
+#define XLPD_XPPU_MSTR_ID01_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID01_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID01_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID01_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID01_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID01_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID01_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID01_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID01_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID01_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID01_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID01_MIDM_DEFVAL  0x3f0UL
+
+#define XLPD_XPPU_MSTR_ID01_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID01_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID01_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID01_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId02
+ */
+#define XLPD_XPPU_MSTR_ID02    ( ( XLPD_XPPU_BASEADDR ) + 0x00000108UL )
+#define XLPD_XPPU_MSTR_ID02_RSTVAL   0x83f00010UL
+
+#define XLPD_XPPU_MSTR_ID02_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID02_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID02_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID02_MIDP_DEFVAL  0x1UL
+
+#define XLPD_XPPU_MSTR_ID02_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID02_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID02_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID02_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID02_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID02_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID02_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID02_MIDM_DEFVAL  0x3f0UL
+
+#define XLPD_XPPU_MSTR_ID02_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID02_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID02_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID02_MID_DEFVAL  0x10UL
+
+/**
+ * Register: XlpdXppuMstrId03
+ */
+#define XLPD_XPPU_MSTR_ID03    ( ( XLPD_XPPU_BASEADDR ) + 0x0000010CUL )
+#define XLPD_XPPU_MSTR_ID03_RSTVAL   0x83c00080UL
+
+#define XLPD_XPPU_MSTR_ID03_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID03_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID03_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID03_MIDP_DEFVAL  0x1UL
+
+#define XLPD_XPPU_MSTR_ID03_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID03_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID03_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID03_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID03_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID03_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID03_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID03_MIDM_DEFVAL  0x3c0UL
+
+#define XLPD_XPPU_MSTR_ID03_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID03_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID03_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID03_MID_DEFVAL  0x80UL
+
+/**
+ * Register: XlpdXppuMstrId04
+ */
+#define XLPD_XPPU_MSTR_ID04    ( ( XLPD_XPPU_BASEADDR ) + 0x00000110UL )
+#define XLPD_XPPU_MSTR_ID04_RSTVAL   0x83c30080UL
+
+#define XLPD_XPPU_MSTR_ID04_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID04_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID04_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID04_MIDP_DEFVAL  0x1UL
+
+#define XLPD_XPPU_MSTR_ID04_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID04_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID04_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID04_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID04_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID04_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID04_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID04_MIDM_DEFVAL  0x3c3UL
+
+#define XLPD_XPPU_MSTR_ID04_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID04_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID04_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID04_MID_DEFVAL  0x80UL
+
+/**
+ * Register: XlpdXppuMstrId05
+ */
+#define XLPD_XPPU_MSTR_ID05    ( ( XLPD_XPPU_BASEADDR ) + 0x00000114UL )
+#define XLPD_XPPU_MSTR_ID05_RSTVAL   0x03c30081UL
+
+#define XLPD_XPPU_MSTR_ID05_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID05_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID05_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID05_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID05_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID05_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID05_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID05_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID05_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID05_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID05_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID05_MIDM_DEFVAL  0x3c3UL
+
+#define XLPD_XPPU_MSTR_ID05_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID05_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID05_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID05_MID_DEFVAL  0x81UL
+
+/**
+ * Register: XlpdXppuMstrId06
+ */
+#define XLPD_XPPU_MSTR_ID06    ( ( XLPD_XPPU_BASEADDR ) + 0x00000118UL )
+#define XLPD_XPPU_MSTR_ID06_RSTVAL   0x03c30082UL
+
+#define XLPD_XPPU_MSTR_ID06_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID06_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID06_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID06_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID06_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID06_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID06_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID06_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID06_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID06_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID06_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID06_MIDM_DEFVAL  0x3c3UL
+
+#define XLPD_XPPU_MSTR_ID06_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID06_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID06_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID06_MID_DEFVAL  0x82UL
+
+/**
+ * Register: XlpdXppuMstrId07
+ */
+#define XLPD_XPPU_MSTR_ID07    ( ( XLPD_XPPU_BASEADDR ) + 0x0000011CUL )
+#define XLPD_XPPU_MSTR_ID07_RSTVAL   0x83c30083UL
+
+#define XLPD_XPPU_MSTR_ID07_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID07_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID07_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID07_MIDP_DEFVAL  0x1UL
+
+#define XLPD_XPPU_MSTR_ID07_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID07_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID07_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID07_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID07_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID07_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID07_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID07_MIDM_DEFVAL  0x3c3UL
+
+#define XLPD_XPPU_MSTR_ID07_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID07_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID07_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID07_MID_DEFVAL  0x83UL
+
+/**
+ * Register: XlpdXppuMstrId08
+ */
+#define XLPD_XPPU_MSTR_ID08    ( ( XLPD_XPPU_BASEADDR ) + 0x00000120UL )
+#define XLPD_XPPU_MSTR_ID08_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID08_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID08_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID08_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID08_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID08_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID08_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID08_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID08_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID08_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID08_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID08_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID08_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID08_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID08_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID08_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID08_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId09
+ */
+#define XLPD_XPPU_MSTR_ID09    ( ( XLPD_XPPU_BASEADDR ) + 0x00000124UL )
+#define XLPD_XPPU_MSTR_ID09_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID09_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID09_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID09_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID09_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID09_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID09_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID09_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID09_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID09_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID09_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID09_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID09_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID09_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID09_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID09_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID09_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId10
+ */
+#define XLPD_XPPU_MSTR_ID10    ( ( XLPD_XPPU_BASEADDR ) + 0x00000128UL )
+#define XLPD_XPPU_MSTR_ID10_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID10_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID10_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID10_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID10_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID10_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID10_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID10_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID10_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID10_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID10_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID10_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID10_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID10_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID10_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID10_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID10_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId11
+ */
+#define XLPD_XPPU_MSTR_ID11    ( ( XLPD_XPPU_BASEADDR ) + 0x0000012CUL )
+#define XLPD_XPPU_MSTR_ID11_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID11_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID11_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID11_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID11_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID11_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID11_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID11_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID11_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID11_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID11_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID11_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID11_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID11_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID11_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID11_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID11_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId12
+ */
+#define XLPD_XPPU_MSTR_ID12    ( ( XLPD_XPPU_BASEADDR ) + 0x00000130UL )
+#define XLPD_XPPU_MSTR_ID12_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID12_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID12_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID12_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID12_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID12_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID12_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID12_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID12_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID12_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID12_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID12_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID12_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID12_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID12_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID12_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID12_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId13
+ */
+#define XLPD_XPPU_MSTR_ID13    ( ( XLPD_XPPU_BASEADDR ) + 0x00000134UL )
+#define XLPD_XPPU_MSTR_ID13_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID13_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID13_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID13_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID13_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID13_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID13_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID13_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID13_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID13_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID13_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID13_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID13_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID13_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID13_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID13_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID13_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId14
+ */
+#define XLPD_XPPU_MSTR_ID14    ( ( XLPD_XPPU_BASEADDR ) + 0x00000138UL )
+#define XLPD_XPPU_MSTR_ID14_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID14_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID14_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID14_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID14_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID14_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID14_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID14_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID14_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID14_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID14_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID14_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID14_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID14_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID14_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID14_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID14_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId15
+ */
+#define XLPD_XPPU_MSTR_ID15    ( ( XLPD_XPPU_BASEADDR ) + 0x0000013CUL )
+#define XLPD_XPPU_MSTR_ID15_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID15_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID15_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID15_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID15_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID15_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID15_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID15_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID15_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID15_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID15_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID15_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID15_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID15_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID15_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID15_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID15_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId16
+ */
+#define XLPD_XPPU_MSTR_ID16    ( ( XLPD_XPPU_BASEADDR ) + 0x00000140UL )
+#define XLPD_XPPU_MSTR_ID16_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID16_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID16_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID16_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID16_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID16_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID16_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID16_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID16_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID16_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID16_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID16_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID16_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID16_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID16_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID16_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID16_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId17
+ */
+#define XLPD_XPPU_MSTR_ID17    ( ( XLPD_XPPU_BASEADDR ) + 0x00000144UL )
+#define XLPD_XPPU_MSTR_ID17_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID17_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID17_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID17_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID17_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID17_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID17_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID17_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID17_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID17_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID17_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID17_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID17_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID17_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID17_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID17_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID17_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId18
+ */
+#define XLPD_XPPU_MSTR_ID18    ( ( XLPD_XPPU_BASEADDR ) + 0x00000148UL )
+#define XLPD_XPPU_MSTR_ID18_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID18_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID18_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID18_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID18_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID18_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID18_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID18_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID18_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID18_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID18_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID18_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID18_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID18_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID18_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID18_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID18_MID_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuMstrId19
+ */
+#define XLPD_XPPU_MSTR_ID19    ( ( XLPD_XPPU_BASEADDR ) + 0x0000014CUL )
+#define XLPD_XPPU_MSTR_ID19_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_MSTR_ID19_MIDP_SHIFT   31UL
+#define XLPD_XPPU_MSTR_ID19_MIDP_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID19_MIDP_MASK    0x80000000UL
+#define XLPD_XPPU_MSTR_ID19_MIDP_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID19_MIDR_SHIFT   30UL
+#define XLPD_XPPU_MSTR_ID19_MIDR_WIDTH   1UL
+#define XLPD_XPPU_MSTR_ID19_MIDR_MASK    0x40000000UL
+#define XLPD_XPPU_MSTR_ID19_MIDR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID19_MIDM_SHIFT   16UL
+#define XLPD_XPPU_MSTR_ID19_MIDM_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID19_MIDM_MASK    0x03ff0000UL
+#define XLPD_XPPU_MSTR_ID19_MIDM_DEFVAL  0x0UL
+
+#define XLPD_XPPU_MSTR_ID19_MID_SHIFT   0UL
+#define XLPD_XPPU_MSTR_ID19_MID_WIDTH   10UL
+#define XLPD_XPPU_MSTR_ID19_MID_MASK    0x000003ffUL
+#define XLPD_XPPU_MSTR_ID19_MID_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XLPD_XPPU_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_xppu_sink.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_xppu_sink.h
new file mode 100644
index 000000000..95f7e20a2
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xlpd_xppu_sink.h
@@ -0,0 +1,81 @@
+/* ### HEADER ### */
+
+#ifndef __XLPD_XPPU_SINK_H__
+#define __XLPD_XPPU_SINK_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XlpdXppuSink Base Address
+ */
+#define XLPD_XPPU_SINK_BASEADDR      0xFF9C0000UL
+
+/**
+ * Register: XlpdXppuSinkErrSts
+ */
+#define XLPD_XPPU_SINK_ERR_STS    ( ( XLPD_XPPU_SINK_BASEADDR ) + 0x0000FF00UL )
+#define XLPD_XPPU_SINK_ERR_STS_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_SINK_ERR_STS_RDWR_SHIFT   31UL
+#define XLPD_XPPU_SINK_ERR_STS_RDWR_WIDTH   1UL
+#define XLPD_XPPU_SINK_ERR_STS_RDWR_MASK    0x80000000UL
+#define XLPD_XPPU_SINK_ERR_STS_RDWR_DEFVAL  0x0UL
+
+#define XLPD_XPPU_SINK_ERR_STS_ADDR_SHIFT   0UL
+#define XLPD_XPPU_SINK_ERR_STS_ADDR_WIDTH   12UL
+#define XLPD_XPPU_SINK_ERR_STS_ADDR_MASK    0x00000fffUL
+#define XLPD_XPPU_SINK_ERR_STS_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuSinkIsr
+ */
+#define XLPD_XPPU_SINK_ISR    ( ( XLPD_XPPU_SINK_BASEADDR ) + 0x0000FF10UL )
+#define XLPD_XPPU_SINK_ISR_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_SINK_ISRADDRDECDERR_SHIFT   0UL
+#define XLPD_XPPU_SINK_ISRADDRDECDERR_WIDTH   1UL
+#define XLPD_XPPU_SINK_ISRADDRDECDERR_MASK    0x00000001UL
+#define XLPD_XPPU_SINK_ISRADDRDECDERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuSinkImr
+ */
+#define XLPD_XPPU_SINK_IMR    ( ( XLPD_XPPU_SINK_BASEADDR ) + 0x0000FF14UL )
+#define XLPD_XPPU_SINK_IMR_RSTVAL   0x00000001UL
+
+#define XLPD_XPPU_SINK_IMRADDRDECDERR_SHIFT   0UL
+#define XLPD_XPPU_SINK_IMRADDRDECDERR_WIDTH   1UL
+#define XLPD_XPPU_SINK_IMRADDRDECDERR_MASK    0x00000001UL
+#define XLPD_XPPU_SINK_IMRADDRDECDERR_DEFVAL  0x1UL
+
+/**
+ * Register: XlpdXppuSinkIer
+ */
+#define XLPD_XPPU_SINK_IER    ( ( XLPD_XPPU_SINK_BASEADDR ) + 0x0000FF18UL )
+#define XLPD_XPPU_SINK_IER_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_SINK_IERADDRDECDERR_SHIFT   0UL
+#define XLPD_XPPU_SINK_IERADDRDECDERR_WIDTH   1UL
+#define XLPD_XPPU_SINK_IERADDRDECDERR_MASK    0x00000001UL
+#define XLPD_XPPU_SINK_IERADDRDECDERR_DEFVAL  0x0UL
+
+/**
+ * Register: XlpdXppuSinkIdr
+ */
+#define XLPD_XPPU_SINK_IDR    ( ( XLPD_XPPU_SINK_BASEADDR ) + 0x0000FF1CUL )
+#define XLPD_XPPU_SINK_IDR_RSTVAL   0x00000000UL
+
+#define XLPD_XPPU_SINK_IDRADDRDECDERR_SHIFT   0UL
+#define XLPD_XPPU_SINK_IDRADDRDECDERR_WIDTH   1UL
+#define XLPD_XPPU_SINK_IDRADDRDECDERR_MASK    0x00000001UL
+#define XLPD_XPPU_SINK_IDRADDRDECDERR_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XLPD_XPPU_SINK_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xocm_xmpu_cfg.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xocm_xmpu_cfg.h
new file mode 100644
index 000000000..5e3631f3e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/includes_ps/xocm_xmpu_cfg.h
@@ -0,0 +1,1304 @@
+/* ### HEADER ### */
+
+#ifndef __XOCM_XMPU_CFG_H__
+#define __XOCM_XMPU_CFG_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * XocmXmpuCfg Base Address
+ */
+#define XOCM_XMPU_CFG_BASEADDR      0xFFA70000UL
+
+/**
+ * Register: XocmXmpuCfgCtrl
+ */
+#define XOCM_XMPU_CFG_CTRL    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000000UL )
+#define XOCM_XMPU_CFG_CTRL_RSTVAL   0x00000003UL
+
+#define XOCM_XMPU_CFG_CTRL_ALIGNCFG_SHIFT   3UL
+#define XOCM_XMPU_CFG_CTRL_ALIGNCFG_WIDTH   1UL
+#define XOCM_XMPU_CFG_CTRL_ALIGNCFG_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_CTRL_ALIGNCFG_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_CTRL_POISONCFG_SHIFT   2UL
+#define XOCM_XMPU_CFG_CTRL_POISONCFG_WIDTH   1UL
+#define XOCM_XMPU_CFG_CTRL_POISONCFG_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_CTRL_POISONCFG_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_CTRL_DEFWRALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_CTRL_DEFWRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_CTRL_DEFWRALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_CTRL_DEFWRALWD_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_CTRL_DEFRDALWD_SHIFT   0UL
+#define XOCM_XMPU_CFG_CTRL_DEFRDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_CTRL_DEFRDALWD_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_CTRL_DEFRDALWD_DEFVAL  0x1UL
+
+/**
+ * Register: XocmXmpuCfgErrSts1
+ */
+#define XOCM_XMPU_CFG_ERR_STS1    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000004UL )
+#define XOCM_XMPU_CFG_ERR_STS1_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_ERR_STS1_AXI_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_ERR_STS1_AXI_ADDR_WIDTH   32UL
+#define XOCM_XMPU_CFG_ERR_STS1_AXI_ADDR_MASK    0xffffffffUL
+#define XOCM_XMPU_CFG_ERR_STS1_AXI_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgErrSts2
+ */
+#define XOCM_XMPU_CFG_ERR_STS2    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000008UL )
+#define XOCM_XMPU_CFG_ERR_STS2_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_ERR_STS2_AXI_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_ERR_STS2_AXI_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_ERR_STS2_AXI_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_ERR_STS2_AXI_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgPoison
+ */
+#define XOCM_XMPU_CFG_POISON    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000000CUL )
+#define XOCM_XMPU_CFG_POISON_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_POISON_ATTRIB_SHIFT   20UL
+#define XOCM_XMPU_CFG_POISON_ATTRIB_WIDTH   12UL
+#define XOCM_XMPU_CFG_POISON_ATTRIB_MASK    0xfff00000UL
+#define XOCM_XMPU_CFG_POISON_ATTRIB_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_POISON_BASE_SHIFT   0UL
+#define XOCM_XMPU_CFG_POISON_BASE_WIDTH   20UL
+#define XOCM_XMPU_CFG_POISON_BASE_MASK    0x000fffffUL
+#define XOCM_XMPU_CFG_POISON_BASE_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgIsr
+ */
+#define XOCM_XMPU_CFG_ISR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000010UL )
+#define XOCM_XMPU_CFG_ISR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_ISR_SECURTYVIO_SHIFT   3UL
+#define XOCM_XMPU_CFG_ISR_SECURTYVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_ISR_SECURTYVIO_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_ISR_SECURTYVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_ISR_WRPERMVIO_SHIFT   2UL
+#define XOCM_XMPU_CFG_ISR_WRPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_ISR_WRPERMVIO_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_ISR_WRPERMVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_ISR_RDPERMVIO_SHIFT   1UL
+#define XOCM_XMPU_CFG_ISR_RDPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_ISR_RDPERMVIO_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_ISR_RDPERMVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_ISR_INV_APB_SHIFT   0UL
+#define XOCM_XMPU_CFG_ISR_INV_APB_WIDTH   1UL
+#define XOCM_XMPU_CFG_ISR_INV_APB_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_ISR_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgImr
+ */
+#define XOCM_XMPU_CFG_IMR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000014UL )
+#define XOCM_XMPU_CFG_IMR_RSTVAL   0x0000000fUL
+
+#define XOCM_XMPU_CFG_IMR_SECURTYVIO_SHIFT   3UL
+#define XOCM_XMPU_CFG_IMR_SECURTYVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IMR_SECURTYVIO_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_IMR_SECURTYVIO_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_IMR_WRPERMVIO_SHIFT   2UL
+#define XOCM_XMPU_CFG_IMR_WRPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IMR_WRPERMVIO_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_IMR_WRPERMVIO_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_IMR_RDPERMVIO_SHIFT   1UL
+#define XOCM_XMPU_CFG_IMR_RDPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IMR_RDPERMVIO_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_IMR_RDPERMVIO_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_IMR_INV_APB_SHIFT   0UL
+#define XOCM_XMPU_CFG_IMR_INV_APB_WIDTH   1UL
+#define XOCM_XMPU_CFG_IMR_INV_APB_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_IMR_INV_APB_DEFVAL  0x1UL
+
+/**
+ * Register: XocmXmpuCfgIen
+ */
+#define XOCM_XMPU_CFG_IEN    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000018UL )
+#define XOCM_XMPU_CFG_IEN_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_IEN_SECURTYVIO_SHIFT   3UL
+#define XOCM_XMPU_CFG_IEN_SECURTYVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IEN_SECURTYVIO_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_IEN_SECURTYVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_IEN_WRPERMVIO_SHIFT   2UL
+#define XOCM_XMPU_CFG_IEN_WRPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IEN_WRPERMVIO_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_IEN_WRPERMVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_IEN_RDPERMVIO_SHIFT   1UL
+#define XOCM_XMPU_CFG_IEN_RDPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IEN_RDPERMVIO_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_IEN_RDPERMVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_IEN_INV_APB_SHIFT   0UL
+#define XOCM_XMPU_CFG_IEN_INV_APB_WIDTH   1UL
+#define XOCM_XMPU_CFG_IEN_INV_APB_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_IEN_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgIds
+ */
+#define XOCM_XMPU_CFG_IDS    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000001CUL )
+#define XOCM_XMPU_CFG_IDS_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_IDS_SECURTYVIO_SHIFT   3UL
+#define XOCM_XMPU_CFG_IDS_SECURTYVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IDS_SECURTYVIO_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_IDS_SECURTYVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_IDS_WRPERMVIO_SHIFT   2UL
+#define XOCM_XMPU_CFG_IDS_WRPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IDS_WRPERMVIO_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_IDS_WRPERMVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_IDS_RDPERMVIO_SHIFT   1UL
+#define XOCM_XMPU_CFG_IDS_RDPERMVIO_WIDTH   1UL
+#define XOCM_XMPU_CFG_IDS_RDPERMVIO_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_IDS_RDPERMVIO_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_IDS_INV_APB_SHIFT   0UL
+#define XOCM_XMPU_CFG_IDS_INV_APB_WIDTH   1UL
+#define XOCM_XMPU_CFG_IDS_INV_APB_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_IDS_INV_APB_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgLock
+ */
+#define XOCM_XMPU_CFG_LOCK    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000020UL )
+#define XOCM_XMPU_CFG_LOCK_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_LOCK_REGWRDIS_SHIFT   0UL
+#define XOCM_XMPU_CFG_LOCK_REGWRDIS_WIDTH   1UL
+#define XOCM_XMPU_CFG_LOCK_REGWRDIS_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_LOCK_REGWRDIS_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR00Strt
+ */
+#define XOCM_XMPU_CFG_R00_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000100UL )
+#define XOCM_XMPU_CFG_R00_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R00_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R00_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R00_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R00_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR00End
+ */
+#define XOCM_XMPU_CFG_R00_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000104UL )
+#define XOCM_XMPU_CFG_R00_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R00_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R00_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R00_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R00_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR00Mstr
+ */
+#define XOCM_XMPU_CFG_R00_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000108UL )
+#define XOCM_XMPU_CFG_R00_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R00_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R00_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R00_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R00_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R00_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R00_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R00_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R00_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR00
+ */
+#define XOCM_XMPU_CFG_R00    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000010CUL )
+#define XOCM_XMPU_CFG_R00_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R00_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R00_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R00_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R00_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R00_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R00_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R00_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R00_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R00_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R00_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R00_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R00_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R00_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R00_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R00_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R00_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R00_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R00_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R00_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R00_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR01Strt
+ */
+#define XOCM_XMPU_CFG_R01_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000110UL )
+#define XOCM_XMPU_CFG_R01_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R01_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R01_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R01_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R01_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR01End
+ */
+#define XOCM_XMPU_CFG_R01_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000114UL )
+#define XOCM_XMPU_CFG_R01_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R01_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R01_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R01_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R01_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR01Mstr
+ */
+#define XOCM_XMPU_CFG_R01_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000118UL )
+#define XOCM_XMPU_CFG_R01_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R01_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R01_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R01_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R01_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R01_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R01_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R01_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R01_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR01
+ */
+#define XOCM_XMPU_CFG_R01    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000011CUL )
+#define XOCM_XMPU_CFG_R01_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R01_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R01_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R01_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R01_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R01_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R01_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R01_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R01_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R01_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R01_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R01_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R01_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R01_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R01_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R01_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R01_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R01_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R01_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R01_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R01_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR02Strt
+ */
+#define XOCM_XMPU_CFG_R02_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000120UL )
+#define XOCM_XMPU_CFG_R02_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R02_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R02_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R02_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R02_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR02End
+ */
+#define XOCM_XMPU_CFG_R02_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000124UL )
+#define XOCM_XMPU_CFG_R02_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R02_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R02_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R02_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R02_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR02Mstr
+ */
+#define XOCM_XMPU_CFG_R02_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000128UL )
+#define XOCM_XMPU_CFG_R02_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R02_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R02_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R02_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R02_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R02_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R02_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R02_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R02_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR02
+ */
+#define XOCM_XMPU_CFG_R02    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000012CUL )
+#define XOCM_XMPU_CFG_R02_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R02_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R02_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R02_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R02_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R02_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R02_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R02_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R02_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R02_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R02_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R02_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R02_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R02_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R02_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R02_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R02_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R02_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R02_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R02_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R02_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR03Strt
+ */
+#define XOCM_XMPU_CFG_R03_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000130UL )
+#define XOCM_XMPU_CFG_R03_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R03_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R03_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R03_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R03_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR03End
+ */
+#define XOCM_XMPU_CFG_R03_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000134UL )
+#define XOCM_XMPU_CFG_R03_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R03_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R03_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R03_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R03_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR03Mstr
+ */
+#define XOCM_XMPU_CFG_R03_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000138UL )
+#define XOCM_XMPU_CFG_R03_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R03_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R03_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R03_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R03_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R03_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R03_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R03_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R03_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR03
+ */
+#define XOCM_XMPU_CFG_R03    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000013CUL )
+#define XOCM_XMPU_CFG_R03_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R03_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R03_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R03_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R03_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R03_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R03_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R03_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R03_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R03_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R03_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R03_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R03_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R03_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R03_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R03_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R03_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R03_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R03_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R03_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R03_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR04Strt
+ */
+#define XOCM_XMPU_CFG_R04_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000140UL )
+#define XOCM_XMPU_CFG_R04_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R04_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R04_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R04_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R04_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR04End
+ */
+#define XOCM_XMPU_CFG_R04_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000144UL )
+#define XOCM_XMPU_CFG_R04_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R04_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R04_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R04_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R04_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR04Mstr
+ */
+#define XOCM_XMPU_CFG_R04_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000148UL )
+#define XOCM_XMPU_CFG_R04_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R04_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R04_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R04_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R04_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R04_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R04_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R04_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R04_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR04
+ */
+#define XOCM_XMPU_CFG_R04    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000014CUL )
+#define XOCM_XMPU_CFG_R04_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R04_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R04_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R04_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R04_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R04_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R04_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R04_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R04_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R04_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R04_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R04_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R04_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R04_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R04_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R04_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R04_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R04_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R04_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R04_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R04_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR05Strt
+ */
+#define XOCM_XMPU_CFG_R05_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000150UL )
+#define XOCM_XMPU_CFG_R05_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R05_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R05_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R05_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R05_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR05End
+ */
+#define XOCM_XMPU_CFG_R05_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000154UL )
+#define XOCM_XMPU_CFG_R05_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R05_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R05_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R05_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R05_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR05Mstr
+ */
+#define XOCM_XMPU_CFG_R05_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000158UL )
+#define XOCM_XMPU_CFG_R05_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R05_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R05_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R05_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R05_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R05_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R05_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R05_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R05_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR05
+ */
+#define XOCM_XMPU_CFG_R05    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000015CUL )
+#define XOCM_XMPU_CFG_R05_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R05_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R05_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R05_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R05_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R05_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R05_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R05_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R05_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R05_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R05_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R05_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R05_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R05_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R05_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R05_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R05_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R05_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R05_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R05_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R05_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR06Strt
+ */
+#define XOCM_XMPU_CFG_R06_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000160UL )
+#define XOCM_XMPU_CFG_R06_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R06_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R06_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R06_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R06_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR06End
+ */
+#define XOCM_XMPU_CFG_R06_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000164UL )
+#define XOCM_XMPU_CFG_R06_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R06_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R06_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R06_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R06_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR06Mstr
+ */
+#define XOCM_XMPU_CFG_R06_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000168UL )
+#define XOCM_XMPU_CFG_R06_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R06_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R06_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R06_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R06_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R06_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R06_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R06_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R06_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR06
+ */
+#define XOCM_XMPU_CFG_R06    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000016CUL )
+#define XOCM_XMPU_CFG_R06_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R06_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R06_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R06_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R06_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R06_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R06_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R06_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R06_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R06_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R06_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R06_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R06_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R06_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R06_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R06_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R06_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R06_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R06_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R06_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R06_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR07Strt
+ */
+#define XOCM_XMPU_CFG_R07_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000170UL )
+#define XOCM_XMPU_CFG_R07_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R07_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R07_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R07_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R07_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR07End
+ */
+#define XOCM_XMPU_CFG_R07_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000174UL )
+#define XOCM_XMPU_CFG_R07_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R07_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R07_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R07_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R07_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR07Mstr
+ */
+#define XOCM_XMPU_CFG_R07_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000178UL )
+#define XOCM_XMPU_CFG_R07_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R07_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R07_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R07_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R07_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R07_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R07_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R07_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R07_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR07
+ */
+#define XOCM_XMPU_CFG_R07    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000017CUL )
+#define XOCM_XMPU_CFG_R07_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R07_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R07_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R07_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R07_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R07_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R07_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R07_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R07_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R07_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R07_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R07_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R07_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R07_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R07_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R07_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R07_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R07_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R07_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R07_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R07_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR08Strt
+ */
+#define XOCM_XMPU_CFG_R08_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000180UL )
+#define XOCM_XMPU_CFG_R08_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R08_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R08_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R08_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R08_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR08End
+ */
+#define XOCM_XMPU_CFG_R08_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000184UL )
+#define XOCM_XMPU_CFG_R08_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R08_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R08_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R08_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R08_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR08Mstr
+ */
+#define XOCM_XMPU_CFG_R08_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000188UL )
+#define XOCM_XMPU_CFG_R08_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R08_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R08_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R08_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R08_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R08_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R08_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R08_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R08_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR08
+ */
+#define XOCM_XMPU_CFG_R08    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000018CUL )
+#define XOCM_XMPU_CFG_R08_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R08_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R08_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R08_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R08_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R08_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R08_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R08_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R08_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R08_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R08_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R08_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R08_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R08_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R08_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R08_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R08_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R08_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R08_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R08_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R08_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR09Strt
+ */
+#define XOCM_XMPU_CFG_R09_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000190UL )
+#define XOCM_XMPU_CFG_R09_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R09_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R09_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R09_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R09_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR09End
+ */
+#define XOCM_XMPU_CFG_R09_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000194UL )
+#define XOCM_XMPU_CFG_R09_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R09_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R09_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R09_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R09_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR09Mstr
+ */
+#define XOCM_XMPU_CFG_R09_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x00000198UL )
+#define XOCM_XMPU_CFG_R09_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R09_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R09_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R09_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R09_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R09_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R09_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R09_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R09_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR09
+ */
+#define XOCM_XMPU_CFG_R09    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x0000019CUL )
+#define XOCM_XMPU_CFG_R09_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R09_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R09_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R09_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R09_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R09_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R09_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R09_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R09_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R09_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R09_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R09_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R09_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R09_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R09_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R09_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R09_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R09_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R09_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R09_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R09_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR10Strt
+ */
+#define XOCM_XMPU_CFG_R10_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001A0UL )
+#define XOCM_XMPU_CFG_R10_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R10_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R10_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R10_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R10_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR10End
+ */
+#define XOCM_XMPU_CFG_R10_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001A4UL )
+#define XOCM_XMPU_CFG_R10_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R10_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R10_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R10_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R10_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR10Mstr
+ */
+#define XOCM_XMPU_CFG_R10_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001A8UL )
+#define XOCM_XMPU_CFG_R10_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R10_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R10_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R10_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R10_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R10_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R10_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R10_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R10_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR10
+ */
+#define XOCM_XMPU_CFG_R10    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001ACUL )
+#define XOCM_XMPU_CFG_R10_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R10_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R10_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R10_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R10_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R10_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R10_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R10_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R10_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R10_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R10_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R10_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R10_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R10_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R10_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R10_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R10_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R10_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R10_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R10_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R10_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR11Strt
+ */
+#define XOCM_XMPU_CFG_R11_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001B0UL )
+#define XOCM_XMPU_CFG_R11_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R11_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R11_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R11_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R11_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR11End
+ */
+#define XOCM_XMPU_CFG_R11_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001B4UL )
+#define XOCM_XMPU_CFG_R11_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R11_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R11_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R11_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R11_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR11Mstr
+ */
+#define XOCM_XMPU_CFG_R11_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001B8UL )
+#define XOCM_XMPU_CFG_R11_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R11_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R11_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R11_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R11_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R11_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R11_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R11_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R11_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR11
+ */
+#define XOCM_XMPU_CFG_R11    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001BCUL )
+#define XOCM_XMPU_CFG_R11_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R11_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R11_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R11_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R11_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R11_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R11_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R11_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R11_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R11_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R11_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R11_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R11_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R11_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R11_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R11_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R11_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R11_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R11_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R11_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R11_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR12Strt
+ */
+#define XOCM_XMPU_CFG_R12_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001C0UL )
+#define XOCM_XMPU_CFG_R12_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R12_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R12_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R12_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R12_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR12End
+ */
+#define XOCM_XMPU_CFG_R12_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001C4UL )
+#define XOCM_XMPU_CFG_R12_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R12_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R12_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R12_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R12_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR12Mstr
+ */
+#define XOCM_XMPU_CFG_R12_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001C8UL )
+#define XOCM_XMPU_CFG_R12_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R12_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R12_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R12_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R12_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R12_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R12_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R12_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R12_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR12
+ */
+#define XOCM_XMPU_CFG_R12    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001CCUL )
+#define XOCM_XMPU_CFG_R12_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R12_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R12_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R12_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R12_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R12_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R12_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R12_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R12_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R12_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R12_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R12_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R12_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R12_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R12_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R12_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R12_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R12_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R12_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R12_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R12_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR13Strt
+ */
+#define XOCM_XMPU_CFG_R13_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001D0UL )
+#define XOCM_XMPU_CFG_R13_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R13_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R13_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R13_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R13_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR13End
+ */
+#define XOCM_XMPU_CFG_R13_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001D4UL )
+#define XOCM_XMPU_CFG_R13_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R13_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R13_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R13_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R13_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR13Mstr
+ */
+#define XOCM_XMPU_CFG_R13_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001D8UL )
+#define XOCM_XMPU_CFG_R13_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R13_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R13_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R13_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R13_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R13_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R13_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R13_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R13_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR13
+ */
+#define XOCM_XMPU_CFG_R13    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001DCUL )
+#define XOCM_XMPU_CFG_R13_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R13_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R13_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R13_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R13_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R13_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R13_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R13_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R13_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R13_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R13_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R13_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R13_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R13_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R13_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R13_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R13_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R13_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R13_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R13_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R13_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR14Strt
+ */
+#define XOCM_XMPU_CFG_R14_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001E0UL )
+#define XOCM_XMPU_CFG_R14_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R14_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R14_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R14_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R14_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR14End
+ */
+#define XOCM_XMPU_CFG_R14_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001E4UL )
+#define XOCM_XMPU_CFG_R14_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R14_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R14_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R14_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R14_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR14Mstr
+ */
+#define XOCM_XMPU_CFG_R14_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001E8UL )
+#define XOCM_XMPU_CFG_R14_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R14_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R14_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R14_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R14_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R14_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R14_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R14_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R14_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR14
+ */
+#define XOCM_XMPU_CFG_R14    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001ECUL )
+#define XOCM_XMPU_CFG_R14_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R14_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R14_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R14_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R14_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R14_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R14_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R14_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R14_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R14_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R14_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R14_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R14_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R14_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R14_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R14_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R14_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R14_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R14_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R14_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R14_EN_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR15Strt
+ */
+#define XOCM_XMPU_CFG_R15_STRT    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001F0UL )
+#define XOCM_XMPU_CFG_R15_STRT_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R15_STRT_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R15_STRT_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R15_STRT_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R15_STRT_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR15End
+ */
+#define XOCM_XMPU_CFG_R15_END    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001F4UL )
+#define XOCM_XMPU_CFG_R15_END_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R15_END_ADDR_SHIFT   0UL
+#define XOCM_XMPU_CFG_R15_END_ADDR_WIDTH   28UL
+#define XOCM_XMPU_CFG_R15_END_ADDR_MASK    0x0fffffffUL
+#define XOCM_XMPU_CFG_R15_END_ADDR_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR15Mstr
+ */
+#define XOCM_XMPU_CFG_R15_MSTR    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001F8UL )
+#define XOCM_XMPU_CFG_R15_MSTR_RSTVAL   0x00000000UL
+
+#define XOCM_XMPU_CFG_R15_MSTR_MSK_SHIFT   16UL
+#define XOCM_XMPU_CFG_R15_MSTR_MSK_WIDTH   16UL
+#define XOCM_XMPU_CFG_R15_MSTR_MSK_MASK    0xffff0000UL
+#define XOCM_XMPU_CFG_R15_MSTR_MSK_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R15_MSTR_ID_SHIFT   0UL
+#define XOCM_XMPU_CFG_R15_MSTR_ID_WIDTH   16UL
+#define XOCM_XMPU_CFG_R15_MSTR_ID_MASK    0x0000ffffUL
+#define XOCM_XMPU_CFG_R15_MSTR_ID_DEFVAL  0x0UL
+
+/**
+ * Register: XocmXmpuCfgR15
+ */
+#define XOCM_XMPU_CFG_R15    ( ( XOCM_XMPU_CFG_BASEADDR ) + 0x000001FCUL )
+#define XOCM_XMPU_CFG_R15_RSTVAL   0x00000008UL
+
+#define XOCM_XMPU_CFG_R15_NSCHKTYPE_SHIFT   4UL
+#define XOCM_XMPU_CFG_R15_NSCHKTYPE_WIDTH   1UL
+#define XOCM_XMPU_CFG_R15_NSCHKTYPE_MASK    0x00000010UL
+#define XOCM_XMPU_CFG_R15_NSCHKTYPE_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R15_REGNNS_SHIFT   3UL
+#define XOCM_XMPU_CFG_R15_REGNNS_WIDTH   1UL
+#define XOCM_XMPU_CFG_R15_REGNNS_MASK    0x00000008UL
+#define XOCM_XMPU_CFG_R15_REGNNS_DEFVAL  0x1UL
+
+#define XOCM_XMPU_CFG_R15_WRALWD_SHIFT   2UL
+#define XOCM_XMPU_CFG_R15_WRALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R15_WRALWD_MASK    0x00000004UL
+#define XOCM_XMPU_CFG_R15_WRALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R15_RDALWD_SHIFT   1UL
+#define XOCM_XMPU_CFG_R15_RDALWD_WIDTH   1UL
+#define XOCM_XMPU_CFG_R15_RDALWD_MASK    0x00000002UL
+#define XOCM_XMPU_CFG_R15_RDALWD_DEFVAL  0x0UL
+
+#define XOCM_XMPU_CFG_R15_EN_SHIFT   0UL
+#define XOCM_XMPU_CFG_R15_EN_WIDTH   1UL
+#define XOCM_XMPU_CFG_R15_EN_MASK    0x00000001UL
+#define XOCM_XMPU_CFG_R15_EN_DEFVAL  0x0UL
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XOCM_XMPU_CFG_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/isatty.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/isatty.c
new file mode 100644
index 000000000..242d8faf3
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/isatty.c
@@ -0,0 +1,56 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) sint32 _isatty(sint32 fd);
+}
+#endif
+
+/*
+ * isatty -- returns 1 if connected to a terminal device,
+ *           returns 0 if not. Since we're hooked up to a
+ *           serial port, we'll say yes _AND return a 1.
+ */
+__attribute__((weak)) sint32 isatty(sint32 fd)
+{
+  (void)fd;
+  return (1);
+}
+
+__attribute__((weak)) sint32 _isatty(sint32 fd)
+{
+  (void)fd;
+  return (1);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/kill.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/kill.c
new file mode 100644
index 000000000..1c67ace57
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/kill.c
@@ -0,0 +1,60 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+#include 
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 _kill(s32 pid, s32 sig);
+}
+#endif
+
+/*
+ * kill -- go out via exit...
+ */
+
+__attribute__((weak)) s32 kill(s32 pid, s32 sig)
+{
+  if(pid == 1) {
+    _exit(sig);
+  }
+  return 0;
+}
+
+__attribute__((weak)) s32 _kill(s32 pid, s32 sig)
+{
+  if(pid == 1) {
+    _exit(sig);
+  }
+  return 0;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/lseek.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/lseek.c
new file mode 100644
index 000000000..5cd5a2dd1
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/lseek.c
@@ -0,0 +1,61 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) off_t _lseek(s32 fd, off_t offset, s32 whence);
+}
+#endif
+/*
+ * lseek --  Since a serial port is non-seekable, we return an error.
+ */
+__attribute__((weak)) off_t lseek(s32 fd, off_t offset, s32 whence)
+{
+  (void)fd;
+  (void)offset;
+  (void)whence;
+  errno = ESPIPE;
+  return ((off_t)-1);
+}
+
+__attribute__((weak)) off_t _lseek(s32 fd, off_t offset, s32 whence)
+{
+  (void)fd;
+  (void)offset;
+  (void)whence;
+  errno = ESPIPE;
+  return ((off_t)-1);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/mpu.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/mpu.c
new file mode 100644
index 000000000..bf5ddeefe
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/mpu.c
@@ -0,0 +1,283 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2016 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file mpu.c
+*
+* This file contains initial configuration of the MPU.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00 	pkp  02/20/14 First release
+* 5.04	pkp  12/18/15 Updated MPU initialization as per the proper address map
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xreg_cortexr5.h"
+#include "xil_mpu.h"
+#include "xpseudo_asm.h"
+#include "xparameters.h"
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/**************************** Type Definitions *******************************/
+
+/************************** Constant Definitions *****************************/
+
+/************************** Variable Definitions *****************************/
+
+static const struct {
+	u64 size;
+	unsigned int encoding;
+}region_size[] = {
+	{ 0x20, REGION_32B },
+	{ 0x40, REGION_64B },
+	{ 0x80, REGION_128B },
+	{ 0x100, REGION_256B },
+	{ 0x200, REGION_512B },
+	{ 0x400, REGION_1K },
+	{ 0x800, REGION_2K },
+	{ 0x1000, REGION_4K },
+	{ 0x2000, REGION_8K },
+	{ 0x4000, REGION_16K },
+	{ 0x8000, REGION_32K },
+	{ 0x10000, REGION_64K },
+	{ 0x20000, REGION_128K },
+	{ 0x40000, REGION_256K },
+	{ 0x80000, REGION_512K },
+	{ 0x100000, REGION_1M },
+	{ 0x200000, REGION_2M },
+	{ 0x400000, REGION_4M },
+	{ 0x800000, REGION_8M },
+	{ 0x1000000, REGION_16M },
+	{ 0x2000000, REGION_32M },
+	{ 0x4000000, REGION_64M },
+	{ 0x8000000, REGION_128M },
+	{ 0x10000000, REGION_256M },
+	{ 0x20000000, REGION_512M },
+	{ 0x40000000, REGION_1G },
+	{ 0x80000000, REGION_2G },
+	{ 0x100000000, REGION_4G },
+};
+
+/************************** Function Prototypes ******************************/
+void Init_MPU(void);
+static void Xil_SetAttribute(u32 addr, u32 reg_size,s32 reg_num, u32 attrib);
+static void Xil_DisableMPURegions(void);
+
+/*****************************************************************************
+*
+* Initialize MPU for a given address map and Enabled the background Region in
+* MPU with default memory attributes for rest of address range for Cortex R5
+* processor.
+*
+* @param	None.
+*
+* @return	None.
+*
+*
+******************************************************************************/
+
+void Init_MPU(void)
+{
+	u32 Addr;
+	u32 RegSize;
+	u32 Attrib;
+	u32 RegNum = 0, i;
+	u64 size;
+
+	Xil_DisableMPURegions();
+
+	Addr = 0x00000000U;
+#ifdef	XPAR_PSU_R5_DDR_0_S_AXI_BASEADDR
+	/* If the DDR is present, configure region as per DDR size */
+	size = (XPAR_PSU_R5_DDR_0_S_AXI_HIGHADDR - XPAR_PSU_R5_DDR_0_S_AXI_BASEADDR) + 1;
+	if (size < 0x80000000) {
+		/* Lookup the size.  */
+		for (i = 0; i < sizeof region_size / sizeof region_size[0]; i++) {
+			if (size <= region_size[i].size) {
+				RegSize = region_size[i].encoding;
+				break;
+			}
+		}
+	} else {
+		/* if the DDR size is > 2GB, truncate it to 2GB */
+		RegSize = REGION_2G;
+	}
+#else
+	/* For DDRless system, configure region for TCM */
+	RegSize = REGION_256K;
+#endif
+	Attrib = NORM_NSHARED_WB_WA | PRIV_RW_USER_RW;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/*
+	 * 1G of strongly ordered memory from 0x80000000 to 0xBFFFFFFF for PL.
+	 * 512 MB - LPD-PL interface
+	 * 256 MB - FPD-PL (HPM0) interface
+	 * 256 MB - FPD-PL (HPM1) interface
+	 */
+	Addr = 0x80000000;
+	RegSize = REGION_1G;
+	Attrib = STRONG_ORDERD_SHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/* 512M of device memory from 0xC0000000 to 0xDFFFFFFF for QSPI */
+	Addr = 0xC0000000U;
+	RegSize = REGION_512M;
+	Attrib = DEVICE_NONSHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/* 256M of device memory from 0xE0000000 to 0xEFFFFFFF for PCIe Low */
+	Addr = 0xE0000000U;
+	RegSize = REGION_256M;
+	Attrib = DEVICE_NONSHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/* 16M of device memory from 0xF8000000 to 0xF8FFFFFF for STM_CORESIGHT */
+	Addr = 0xF8000000U;
+	RegSize = REGION_16M;
+	Attrib = DEVICE_NONSHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/* 1M of device memory from 0xF9000000 to 0xF90FFFFF for RPU_A53_GIC */
+	Addr = 0xF9000000U;
+	RegSize = REGION_1M;
+	Attrib = DEVICE_NONSHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/* 16M of device memory from 0xFD000000 to 0xFDFFFFFF for FPS slaves */
+	Addr = 0xFD000000U;
+	RegSize = REGION_16M;
+	Attrib = DEVICE_NONSHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/* 16M of device memory from 0xFE000000 to 0xFEFFFFFF for Upper LPS slaves */
+	Addr = 0xFE000000U;
+	RegSize = REGION_16M;
+	Attrib = DEVICE_NONSHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/*
+	 * 16M of device memory from 0xFF000000 to 0xFFFFFFFF for Lower LPS slaves,
+	 * CSU, PMU, TCM, OCM
+	 */
+	Addr = 0xFF000000U;
+	RegSize = REGION_16M;
+	Attrib = DEVICE_NONSHARED | PRIV_RW_USER_RW   ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+	RegNum++;
+
+	/* 256K of OCM RAM from 0xFFFC0000 to 0xFFFFFFFF marked as normal memory */
+	Addr = 0xFFFC0000U;
+	RegSize = REGION_256K;
+	Attrib = NORM_NSHARED_WB_WA| PRIV_RW_USER_RW  ;
+	Xil_SetAttribute(Addr,RegSize,RegNum, Attrib);
+
+	/* A total of 10 MPU regions are allocated with another 6 being free for users */
+
+}
+
+/*****************************************************************************
+*
+* Set the memory attributes for a section of memory with starting address addr
+* of the region size defined by reg_size having attributes attrib of region number
+* reg_num
+*
+* @param	addr is the address for which attributes are to be set.
+* @param	attrib specifies the attributes for that memory region.
+* @param	reg_size specifies the size for that memory region.
+* @param	reg_num specifies the number for that memory region.
+* @return	None.
+*
+*
+******************************************************************************/
+static void Xil_SetAttribute(u32 addr, u32 reg_size,s32 reg_num, u32 attrib)
+{
+	u32 Local_reg_size = reg_size;
+
+	Local_reg_size = Local_reg_size<<1U;
+	Local_reg_size |= REGION_EN;
+	dsb();
+	mtcp(XREG_CP15_MPU_MEMORY_REG_NUMBER,reg_num);
+	isb();
+	mtcp(XREG_CP15_MPU_REG_BASEADDR,addr); 		/* Set base address of a region */
+	mtcp(XREG_CP15_MPU_REG_ACCESS_CTRL,attrib); 	/* Set the control attribute */
+	mtcp(XREG_CP15_MPU_REG_SIZE_EN,Local_reg_size);	/* set the region size and enable it*/
+	dsb();
+	isb();						/* synchronize context on this processor */
+}
+
+
+/*****************************************************************************
+*
+* Disable all the MPU regions if any of them is enabled
+*
+* @param	None.
+*
+* @return	None.
+*
+*
+******************************************************************************/
+static void Xil_DisableMPURegions(void)
+{
+	u32 Temp;
+	u32 Index;
+	for (Index = 0; Index <= 15; Index++) {
+		mtcp(XREG_CP15_MPU_MEMORY_REG_NUMBER,Index);
+		Temp = mfcp(XREG_CP15_MPU_REG_SIZE_EN);
+		Temp &= (~REGION_EN);
+		dsb();
+		mtcp(XREG_CP15_MPU_REG_SIZE_EN,Temp);
+		dsb();
+		isb();
+	}
+
+}
\ No newline at end of file
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/open.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/open.c
new file mode 100644
index 000000000..c32530bab
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/open.c
@@ -0,0 +1,57 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+/* Use toolchain function for openamp applications*/
+
+#ifndef UNDEFINE_FILE_OPS
+
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 open(char8 *buf, s32 flags, s32 mode);
+}
+#endif
+/*
+ * open -- open a file descriptor. We don't have a filesystem, so
+ *         we return an error.
+ */
+__attribute__((weak)) s32 open(char8 *buf, s32 flags, s32 mode)
+{
+  (void *)buf;
+  (void)flags;
+  (void)mode;
+  errno = EIO;
+  return (-1);
+}
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/outbyte.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/outbyte.c
new file mode 100644
index 000000000..3c6430886
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/outbyte.c
@@ -0,0 +1,15 @@
+#include "xparameters.h"
+#include "xuartps_hw.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+void outbyte(char c); 
+
+#ifdef __cplusplus
+}
+#endif 
+
+void outbyte(char c) {
+	 XUartPs_SendByte(STDOUT_BASEADDRESS, c);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/print.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/print.c
new file mode 100644
index 000000000..31d7b1989
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/print.c
@@ -0,0 +1,32 @@
+/* print.c -- print a string on the output device.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ *
+ */
+
+/*
+ * print -- do a raw print of a string
+ */
+#include "xil_printf.h"
+
+void print(const char8 *ptr)
+{
+#ifdef STDOUT_BASEADDRESS
+  while (*ptr != (char8)0) {
+    outbyte (*ptr);
+	*ptr++;
+  }
+#else
+(void)ptr;
+#endif
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/putnum.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/putnum.c
new file mode 100644
index 000000000..86d3a74e8
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/putnum.c
@@ -0,0 +1,59 @@
+/* putnum.c -- put a hex number on the output device.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+
+/*
+ * putnum -- print a 32 bit number in hex
+ */
+
+/***************************** Include Files *********************************/
+#include "xil_types.h"
+
+/************************** Function Prototypes ******************************/
+extern void print (const char8 *ptr);
+void putnum(u32 num);
+
+void putnum(u32 num)
+{
+  char8  buf[9];
+  u32   cnt;
+  s32 i;
+  char8  *ptr;
+  u32  digit;
+  for(i = 0; i<9; i++) {
+	buf[i] = '0';
+  }
+
+  ptr = buf;
+  for (cnt = 7U ; cnt >= 0U ; cnt--) {
+    digit = (num >> (cnt * 4U)) & 0x0000000fU;
+
+    if ((digit <= 9U) && (ptr != NULL)) {
+		digit += (u32)'0';
+		*ptr = ((char8) digit);
+		ptr += 1;
+	} else if (ptr != NULL) {
+		digit += ((u32)'a' - (u32)10);
+		*ptr = ((char8)digit);
+		ptr += 1;
+	} else {
+		/*Made for MisraC Compliance*/;
+	}
+  }
+
+  if(ptr != NULL) {
+	  *ptr = (char8) 0;
+  }
+  print (buf);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/read.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/read.c
new file mode 100644
index 000000000..90fb25029
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/read.c
@@ -0,0 +1,115 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/* Use toolchain function for openamp applications*/
+
+#ifndef UNDEFINE_FILE_OPS
+
+/* read.c -- read bytes from a input device.
+ */
+
+#include "xparameters.h"
+#include "xil_printf.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 _read (s32 fd, char8* buf, s32 nbytes);
+}
+#endif
+
+/*
+ * read  -- read bytes from the serial port. Ignore fd, since
+ *          we only have stdin.
+ */
+__attribute__((weak)) s32
+read (s32 fd, char8* buf, s32 nbytes)
+{
+#ifdef STDIN_BASEADDRESS
+  s32 i;
+  char8* LocalBuf = buf;
+
+  (void)fd;
+  for (i = 0; i < nbytes; i++) {
+	if(LocalBuf != NULL) {
+		LocalBuf += i;
+	}
+	if(LocalBuf != NULL) {
+	    *LocalBuf = inbyte();
+	    if ((*LocalBuf == '\n' )|| (*LocalBuf == '\r')) {
+	        break;
+		}
+	}
+	if(LocalBuf != NULL) {
+	LocalBuf -= i;
+	}
+  }
+
+  return (i + 1);
+#else
+  (void)fd;
+  (void)buf;
+  (void)nbytes;
+  return 0;
+#endif
+}
+
+__attribute__((weak)) s32
+_read (s32 fd, char8* buf, s32 nbytes)
+{
+#ifdef STDIN_BASEADDRESS
+  s32 i;
+  char8* LocalBuf = buf;
+
+  (void)fd;
+  for (i = 0; i < nbytes; i++) {
+	if(LocalBuf != NULL) {
+		LocalBuf += i;
+	}
+	if(LocalBuf != NULL) {
+	    *LocalBuf = inbyte();
+	    if ((*LocalBuf == '\n' )|| (*LocalBuf == '\r')) {
+	        break;
+		}
+	}
+	if(LocalBuf != NULL) {
+	LocalBuf -= i;
+	}
+  }
+
+  return (i + 1);
+#else
+  (void)fd;
+  (void)buf;
+  (void)nbytes;
+  return 0;
+#endif
+}
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sbrk.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sbrk.c
new file mode 100644
index 000000000..7f94fabb4
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sbrk.c
@@ -0,0 +1,65 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include "xil_types.h"
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) char8 *sbrk (s32 nbytes);
+}
+#endif
+
+extern u8 _heap_start[];
+extern u8 _heap_end[];
+extern char8 HeapBase[];
+extern char8 HeapLimit[];
+
+
+
+__attribute__((weak)) char8 *sbrk (s32 nbytes)
+{
+  char8 *base;
+  static char8 *heap_ptr = HeapBase;
+
+  base = heap_ptr;
+  if(heap_ptr != NULL) {
+	heap_ptr += nbytes;
+  }
+
+/*  if (heap_ptr <= ((char8 *)&_heap_end + 1)) */
+  if (heap_ptr <= ((char8 *)&HeapLimit + 1)) {
+    return base;
+  }	else {
+    errno = ENOMEM;
+    return ((char8 *)-1);
+  }
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sleep.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sleep.c
new file mode 100644
index 000000000..508b30f61
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sleep.c
@@ -0,0 +1,125 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************
+*
+* @file sleep.c
+*
+* This function provides a second delay using the Global Timer register in
+* the ARM Cortex R5 MP core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00 	pkp  	 02/20/14 First release
+* 5.04  pkp		 02/19/16 sleep routine is modified to use TTC3 if present
+*						  else it will use set of assembly instructions to
+*						  provide the required delay
+* 5.04	pkp		 03/09/16 Assembly routine for sleep is modified to avoid
+*						  disabling the interrupt
+* 5.04	pkp		 03/11/16 Compare the counter value to previously read value
+*						  to detect the overflow for TTC3
+* 

+*
+******************************************************************************/
+/***************************** Include Files *********************************/
+
+#include "sleep.h"
+#include "xtime_l.h"
+#include "xparameters.h"
+
+/*****************************************************************************/
+/*
+*
+* This API is used to provide delays in seconds.
+*
+* @param	seconds requested
+*
+* @return	0 always
+*
+* @note		The sleep API is implemented using TTC3 counter 0 timer if present.
+*			When TTC3 is absent, sleep is implemented using assembly
+*			instructions which is tested with instruction and data caches
+*			enabled and it gives proper delay. It may give more delay than
+*			exepcted when caches are disabled. If interrupt comes when sleep
+*			using assembly instruction is being executed, the delay may be
+*			greater than what is expected since once the interrupt is served
+*			count resumes from where it was interrupted unlike the case of TTC3
+*			where counter keeps running while interrupt is being served.
+*
+****************************************************************************/
+
+s32 sleep(u32 seconds)
+{
+#ifdef SLEEP_TIMER_BASEADDR
+	u64 tEnd;
+	u64 tCur;
+	u32 TimeHighVal;
+	XTime TimeLowVal1;
+	XTime TimeLowVal2;
+
+	TimeHighVal = 0;
+
+	XTime_GetTime(&TimeLowVal1);
+	tEnd  = (u64)TimeLowVal1 + (((u64) seconds) * COUNTS_PER_SECOND);
+
+	do
+	{
+
+	    XTime_GetTime(&TimeLowVal2);
+	    if (TimeLowVal2 < TimeLowVal1) {
+				TimeHighVal++;
+		}
+
+		TimeLowVal1 = TimeLowVal2;
+	    tCur = (((u64) TimeHighVal) << 32U) | (u64)TimeLowVal2;
+
+	} while (tCur < tEnd);
+
+	return 0;
+#else
+	__asm__ __volatile__ (
+			" push {r0,r1}		\n\t"
+			" mov r0, %[sec]	\n\t"
+			" 1: \n\t"
+			" mov r1, %[iter] 	\n\t"
+			" 2:				\n\t"
+			" subs r1, r1, #0x1 \n\t"
+			" bne   2b    		\n\t"
+			" subs r0,r0,#0x1 	\n\t"
+			"  bne 1b 			\n\t"
+			" pop {r0,r1} 		\n\t"
+			:: [iter] "r" (ITERS_PER_SEC), [sec] "r" (seconds)
+	);
+#endif
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sleep.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sleep.h
new file mode 100644
index 000000000..9b49173c6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/sleep.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+#ifndef SLEEP_H
+#define SLEEP_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "xil_types.h"
+#include "xil_io.h"
+
+s32 usleep(u32 useconds);
+s32 sleep(u32 seconds);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/uart.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/uart.c
new file mode 100644
index 000000000..bff3ed24f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/uart.c
@@ -0,0 +1,160 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file uart.c
+*
+* This file contains APIs for configuring the UART.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00 	pkp  02/20/14 First release
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+#include "xil_types.h"
+#include "xparameters.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/* Register offsets */
+#define UART_CR_OFFSET		0x00000000U
+#define UART_MR_OFFSET		0x00000004U
+#define UART_BAUDGEN_OFFSET	0x00000018U
+#define UART_BAUDDIV_OFFSET	0x00000034U
+
+#define MAX_BAUD_ERROR_RATE	0x00000003U	/* max % error allowed */
+#define UART_BAUDRATE	115200U
+#define CSU_VERSION_REG     0xFFCA0044U
+
+void Init_Uart(void);
+
+void Init_Uart(void)
+{
+#ifdef STDOUT_BASEADDRESS
+	u8 IterBAUDDIV;		/* Iterator for available baud divisor values */
+	u32 BRGR_Value;		/* Calculated value for baud rate generator */
+	u32 CalcBaudRate;	/* Calculated baud rate */
+	u32 BaudError;		/* Diff between calculated and requested baud rate */
+	u32 Best_BRGR = 0U;	/* Best value for baud rate generator */
+	u8 Best_BAUDDIV = 0U;	/* Best value for baud divisor */
+	u32 Best_Error = 0xFFFFFFFFU;
+	u32 PercentError;
+	u32 InputClk;
+   u32 BaudRate = UART_BAUDRATE;
+
+#if (STDOUT_BASEADDRESS == XPAR_XUARTPS_0_BASEADDR)
+	InputClk = XPAR_XUARTPS_0_UART_CLK_FREQ_HZ;
+#elif (STDOUT_BASEADDRESS == XPAR_XUARTPS_1_BASEADDR)
+	InputClk = XPAR_XUARTPS_1_UART_CLK_FREQ_HZ;
+#else
+	/* STDIO is not set or axi_uart is being used for STDIO */
+	return;
+#endif
+InputClk = 25000000U;
+	/*
+	 * Determine the Baud divider. It can be 4to 254.
+	 * Loop through all possible combinations
+	 */
+	for (IterBAUDDIV = 4U; IterBAUDDIV < 255U; IterBAUDDIV++) {
+
+		/*
+		 * Calculate the value for BRGR register
+		 */
+		BRGR_Value = InputClk / (BaudRate * ((u32)IterBAUDDIV + 0x00000001U));
+
+		/*
+		 * Calculate the baud rate from the BRGR value
+		 */
+		CalcBaudRate = InputClk/ (BRGR_Value * ((u32)IterBAUDDIV + 0x00000001U));
+
+		/*
+		 * Avoid unsigned integer underflow
+		 */
+		if (BaudRate > CalcBaudRate) {
+			BaudError = BaudRate - CalcBaudRate;
+		} else {
+			BaudError = CalcBaudRate - BaudRate;
+		}
+
+		/*
+		 * Find the calculated baud rate closest to requested baud rate.
+		 */
+		if (Best_Error > BaudError) {
+
+			Best_BRGR = BRGR_Value;
+			Best_BAUDDIV = IterBAUDDIV;
+			Best_Error = BaudError;
+
+		}
+	}
+
+	/*
+	 * Make sure the best error is not too large.
+	 */
+	PercentError = (Best_Error * 100U) / BaudRate;
+	if (MAX_BAUD_ERROR_RATE < PercentError) {
+		return;
+	}
+
+	/* set CD and BDIV */
+	Xil_Out32(STDOUT_BASEADDRESS + UART_BAUDGEN_OFFSET, Best_BRGR);
+	Xil_Out32(STDOUT_BASEADDRESS + UART_BAUDDIV_OFFSET, (u32)Best_BAUDDIV);
+
+    /*
+     * Veloce specific code
+     */
+    if((Xil_In32(CSU_VERSION_REG) & 0x0000F000U) == 0x00002000U ) {
+	Xil_Out32(STDOUT_BASEADDRESS + UART_BAUDGEN_OFFSET, 0x00000002U);
+	    Xil_Out32(STDOUT_BASEADDRESS + UART_BAUDDIV_OFFSET, 0x00000004U);
+    }
+
+	/*
+	 * 8 data, 1 stop, 0 parity bits
+	 * sel_clk=uart_clk=APB clock
+	 */
+	Xil_Out32(STDOUT_BASEADDRESS + UART_MR_OFFSET, 0x00000020U);
+
+	/* enable Tx/Rx and reset Tx/Rx data path */
+	Xil_Out32((STDOUT_BASEADDRESS + UART_CR_OFFSET), 0x00000017U);
+
+	return;
+#endif
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/unlink.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/unlink.c
new file mode 100644
index 000000000..0c9f0f78e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/unlink.c
@@ -0,0 +1,50 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+#include 
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) sint32 unlink(char8 *path);
+}
+#endif
+/*
+ * unlink -- since we have no file system,
+ *           we just return an error.
+ */
+__attribute__((weak)) sint32 unlink(char8 *path)
+{
+  (void *)path;
+  errno = EIO;
+  return (-1);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/usleep.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/usleep.c
new file mode 100644
index 000000000..afc9414bb
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/usleep.c
@@ -0,0 +1,127 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file usleep.c
+*
+* This function provides a microsecond delay using the Global Timer register in
+* the ARM Cortex R5 MP core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00 	pkp  	 02/20/14 First release
+* 5.04  pkp		 02/19/16 usleep routine is modified to use TTC3 if present
+*						  else it will use set of assembly instructions to
+*						  provide the required delay
+* 5.04	pkp		 03/09/16 Assembly routine for usleep is modified to avoid
+*						  disabling the interrupt
+* 5.04	pkp		 03/11/16 Compare the counter value to previously read value
+*						  to detect the overflow for TTC3
+* 

+*
+******************************************************************************/
+/***************************** Include Files *********************************/
+
+#include "sleep.h"
+#include "xtime_l.h"
+#include "xparameters.h"
+#include "xil_types.h"
+#include "xpseudo_asm.h"
+#include "xreg_cortexr5.h"
+
+/*****************************************************************************/
+/**
+*
+* This API gives a delay in microseconds
+*
+* @param	useconds requested
+*
+* @return	0 always
+*
+* @note		The usleep API is implemented using TTC3 counter 0 timer if present
+*			When TTC3 is absent, usleep is implemented using assembly
+*			instructions which is tested with instruction and data caches
+*			enabled and it gives proper delay. It may give more delay than
+*			exepcted when caches are disabled. If interrupt comes when usleep
+*			using assembly instruction is being executed, the delay may be
+*			greater than what is expected since once the interrupt is served
+*			count resumes from where it was interrupted unlike the case of TTC3
+*			where counter keeps running while interrupt is being served.
+*
+****************************************************************************/
+
+s32 usleep(u32 useconds)
+{
+
+#ifdef SLEEP_TIMER_BASEADDR
+	u64 tEnd;
+	u64 tCur;
+	u32 TimeHighVal;
+	XTime TimeLowVal1;
+	XTime TimeLowVal2;
+
+	TimeHighVal = 0;
+
+	XTime_GetTime(&TimeLowVal1);
+	tEnd  = (u64)TimeLowVal1 + (((u64) useconds) * COUNTS_PER_USECOND);
+
+	do
+	{
+		XTime_GetTime(&TimeLowVal2);
+	    if (TimeLowVal2 < TimeLowVal1) {
+				TimeHighVal++;
+		}
+		TimeLowVal1 = TimeLowVal2;
+		tCur = (((u64) TimeHighVal) << 32U) | (u64)TimeLowVal2;
+	} while (tCur < tEnd);
+
+	return 0;
+#else
+	__asm__ __volatile__ (
+			" push {r0,r1}		\n\t"
+			" mov r0, %[usec]	\n\t"
+			" 1: \n\t"
+			" mov r1, %[iter] 	\n\t"
+			" 2:				\n\t"
+			" subs r1, r1, #0x1 \n\t"
+			" bne   2b    		\n\t"
+			" subs r0,r0,#0x1 	\n\t"
+			"  bne 1b 			\n\t"
+			" pop {r0,r1} 		\n\t"
+			:: [iter] "r" (ITERS_PER_USEC), [usec] "r" (useconds)
+	);
+#endif
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/vectors.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/vectors.c
new file mode 100644
index 000000000..73162672f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/vectors.c
@@ -0,0 +1,168 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file vectors.c
+*
+* This file contains the C level vectors for the ARM Cortex R5 core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00 	pkp  02/20/14 First release
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+/***************************** Include Files *********************************/
+
+#include "xil_exception.h"
+#include "vectors.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+typedef struct {
+	Xil_ExceptionHandler Handler;
+	void *Data;
+} XExc_VectorTableEntry;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+extern XExc_VectorTableEntry XExc_VectorTable[];
+
+/************************** Function Prototypes ******************************/
+
+
+
+/*****************************************************************************/
+/**
+*
+* This is the C level wrapper for the FIQ interrupt called from the vectors.s
+* file.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void FIQInterrupt(void)
+{
+	XExc_VectorTable[XIL_EXCEPTION_ID_FIQ_INT].Handler(XExc_VectorTable[
+					XIL_EXCEPTION_ID_FIQ_INT].Data);
+}
+
+/*****************************************************************************/
+/**
+*
+* This is the C level wrapper for the IRQ interrupt called from the vectors.s
+* file.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void IRQInterrupt(void)
+{
+	XExc_VectorTable[XIL_EXCEPTION_ID_IRQ_INT].Handler(XExc_VectorTable[
+					XIL_EXCEPTION_ID_IRQ_INT].Data);
+}
+
+/*****************************************************************************/
+/**
+*
+* This is the C level wrapper for the SW Interrupt called from the vectors.s
+* file.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void SWInterrupt(void)
+{
+	XExc_VectorTable[XIL_EXCEPTION_ID_SWI_INT].Handler(XExc_VectorTable[
+					XIL_EXCEPTION_ID_SWI_INT].Data);
+}
+
+/*****************************************************************************/
+/**
+*
+* This is the C level wrapper for the DataAbort Interrupt called from the
+* vectors.s file.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void DataAbortInterrupt(void)
+{
+	XExc_VectorTable[XIL_EXCEPTION_ID_DATA_ABORT_INT].Handler(
+		XExc_VectorTable[XIL_EXCEPTION_ID_DATA_ABORT_INT].Data);
+}
+
+/*****************************************************************************/
+/**
+*
+* This is the C level wrapper for the PrefetchAbort Interrupt called from the
+* vectors.s file.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void PrefetchAbortInterrupt(void)
+{
+	XExc_VectorTable[XIL_EXCEPTION_ID_PREFETCH_ABORT_INT].Handler(
+		XExc_VectorTable[XIL_EXCEPTION_ID_PREFETCH_ABORT_INT].Data);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/vectors.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/vectors.h
new file mode 100644
index 000000000..ad4d8ece3
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/vectors.h
@@ -0,0 +1,81 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file vectors.h
+*
+* This file contains the C level vector prototypes for the ARM Cortex R5 core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00 	pkp  02/20/14 First release
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+#ifndef VECTORS_H_
+#define VECTORS_H_
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/**************************** Type Definitions *******************************/
+
+/************************** Constant Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+void FIQInterrupt(void);
+void IRQInterrupt(void);
+void SWInterrupt(void);
+void DataAbortInterrupt(void);
+void PrefetchAbortInterrupt(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/write.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/write.c
new file mode 100644
index 000000000..4ae96c29f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/write.c
@@ -0,0 +1,116 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+/* Use toolchain function for openamp applications*/
+
+#ifndef UNDEFINE_FILE_OPS
+
+/* write.c -- write bytes to an output device.
+ */
+
+#include "xparameters.h"
+#include "xil_printf.h"
+
+#ifdef __cplusplus
+extern "C" {
+	__attribute__((weak)) s32 _write (s32 fd, char8* buf, s32 nbytes);
+}
+#endif
+
+/*
+ * write -- write bytes to the serial port. Ignore fd, since
+ *          stdout and stderr are the same. Since we have no filesystem,
+ *          open will only return an error.
+ */
+__attribute__((weak)) s32
+write (s32 fd, char8* buf, s32 nbytes)
+
+{
+#ifdef STDOUT_BASEADDRESS
+  s32 i;
+  char8* LocalBuf = buf;
+
+  (void)fd;
+  for (i = 0; i < nbytes; i++) {
+	if(LocalBuf != NULL) {
+		LocalBuf += i;
+	}
+	if(LocalBuf != NULL) {
+	    if (*LocalBuf == '\n') {
+	      outbyte ('\r');
+	    }
+	    outbyte (*LocalBuf);
+	}
+	if(LocalBuf != NULL) {
+		LocalBuf -= i;
+	}
+  }
+  return (nbytes);
+#else
+  (void)fd;
+  (void)buf;
+  (void)nbytes;
+  return 0;
+#endif
+}
+
+__attribute__((weak)) s32
+_write (s32 fd, char8* buf, s32 nbytes)
+{
+#ifdef STDOUT_BASEADDRESS
+  s32 i;
+  char8* LocalBuf = buf;
+
+  (void)fd;
+  for (i = 0; i < nbytes; i++) {
+	if(LocalBuf != NULL) {
+		LocalBuf += i;
+	}
+	if(LocalBuf != NULL) {
+	    if (*LocalBuf == '\n') {
+	      outbyte ('\r');
+	    }
+	    outbyte (*LocalBuf);
+	}
+	if(LocalBuf != NULL) {
+		LocalBuf -= i;
+	}
+  }
+  return (nbytes);
+#else
+  (void)fd;
+  (void)buf;
+  (void)nbytes;
+  return 0;
+#endif
+}
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xbasic_types.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xbasic_types.h
new file mode 100644
index 000000000..787212ca7
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xbasic_types.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xbasic_types.h
+*
+*
+* @note  Dummy File for backwards compatibility
+*
+
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date   Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a adk   1/31/14  Added in bsp common folder for backward compatibility
+* 

+*
+******************************************************************************/
+
+#ifndef XBASIC_TYPES_H	/* prevent circular inclusions */
+#define XBASIC_TYPES_H	/* by using protection macros */
+
+/** @name Legacy types
+ * Deprecated legacy types.
+ * @{
+ */
+typedef unsigned char	Xuint8;		/**< unsigned 8-bit */
+typedef char		Xint8;		/**< signed 8-bit */
+typedef unsigned short	Xuint16;	/**< unsigned 16-bit */
+typedef short		Xint16;		/**< signed 16-bit */
+typedef unsigned long	Xuint32;	/**< unsigned 32-bit */
+typedef long		Xint32;		/**< signed 32-bit */
+typedef float		Xfloat32;	/**< 32-bit floating point */
+typedef double		Xfloat64;	/**< 64-bit double precision FP */
+typedef unsigned long	Xboolean;	/**< boolean (XTRUE or XFALSE) */
+
+#if !defined __XUINT64__
+typedef struct
+{
+	Xuint32 Upper;
+	Xuint32 Lower;
+} Xuint64;
+#endif
+
+/** @name New types
+ * New simple types.
+ * @{
+ */
+#ifndef __KERNEL__
+#ifndef XIL_TYPES_H
+typedef Xuint32         u32;
+typedef Xuint16         u16;
+typedef Xuint8          u8;
+#endif
+#else
+#include 
+#endif
+
+#ifndef TRUE
+#  define TRUE		1U
+#endif
+
+#ifndef FALSE
+#  define FALSE		0U
+#endif
+
+#ifndef NULL
+#define NULL		0U
+#endif
+
+/*
+ * Xilinx NULL, TRUE and FALSE legacy support. Deprecated.
+ * Please use NULL, TRUE and FALSE
+ */
+#define XNULL		NULL
+#define XTRUE		TRUE
+#define XFALSE		FALSE
+
+/*
+ * This file is deprecated and users
+ * should use xil_types.h and xil_assert.h\n\r
+ */
+#warning  The xbasics_type.h file is deprecated and users should use xil_types.h and xil_assert.
+#warning  Please refer the Standalone BSP UG647 for further details
+
+
+#endif	/* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xdebug.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xdebug.h
new file mode 100644
index 000000000..650946bd0
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xdebug.h
@@ -0,0 +1,32 @@
+#ifndef XDEBUG  /* prevent circular inclusions */
+#define XDEBUG  /* by using protection macros */
+
+#if defined(DEBUG) && !defined(NDEBUG)
+
+#ifndef XDEBUG_WARNING
+#define XDEBUG_WARNING
+#warning DEBUG is enabled
+#endif
+
+int printf(const char *format, ...);
+
+#define XDBG_DEBUG_ERROR             0x00000001U    /* error  condition messages */
+#define XDBG_DEBUG_GENERAL           0x00000002U    /* general debug  messages */
+#define XDBG_DEBUG_ALL               0xFFFFFFFFU    /* all debugging data */
+
+#define xdbg_current_types (XDBG_DEBUG_GENERAL)
+
+#define xdbg_stmnt(x)  x
+
+#define xdbg_printf(type, ...) (((type) & xdbg_current_types) ? printf (__VA_ARGS__) : 0)
+
+
+#else /* defined(DEBUG) && !defined(NDEBUG) */
+
+#define xdbg_stmnt(x)
+
+#define xdbg_printf(...)
+
+#endif /* defined(DEBUG) && !defined(NDEBUG) */
+
+#endif /* XDEBUG */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xenv.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xenv.h
new file mode 100644
index 000000000..3d97bebd4
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xenv.h
@@ -0,0 +1,187 @@
+/******************************************************************************
+*
+* Copyright (C) 2002 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xenv.h
+*
+* Defines common services that are typically found in a host operating.
+* environment. This include file simply includes an OS specific file based
+* on the compile-time constant BUILD_ENV_*, where * is the name of the target
+* environment.
+*
+* All services are defined as macros.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b ch   10/24/02 Added XENV_LINUX
+* 1.00a rmm  04/17/02 First release
+* 

+*
+******************************************************************************/
+
+#ifndef XENV_H /* prevent circular inclusions */
+#define XENV_H /* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Select which target environment we are operating under
+ */
+
+/* VxWorks target environment */
+#if defined XENV_VXWORKS
+#include "xenv_vxworks.h"
+
+/* Linux target environment */
+#elif defined XENV_LINUX
+#include "xenv_linux.h"
+
+/* Unit test environment */
+#elif defined XENV_UNITTEST
+#include "ut_xenv.h"
+
+/* Integration test environment */
+#elif defined XENV_INTTEST
+#include "int_xenv.h"
+
+/* Standalone environment selected */
+#else
+#include "xenv_standalone.h"
+#endif
+
+
+/*
+ * The following comments specify the types and macro wrappers that are
+ * expected to be defined by the target specific header files
+ */
+
+/**************************** Type Definitions *******************************/
+
+/*****************************************************************************/
+/**
+ *
+ * XENV_TIME_STAMP
+ *
+ * A structure that contains a time stamp used by other time stamp macros
+ * defined below. This structure is processor dependent.
+ */
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/**
+ *
+ * XENV_MEM_COPY(void *DestPtr, void *SrcPtr, unsigned Bytes)
+ *
+ * Copies a non-overlapping block of memory.
+ *
+ * @param   DestPtr is the destination address to copy data to.
+ * @param   SrcPtr is the source address to copy data from.
+ * @param   Bytes is the number of bytes to copy.
+ *
+ * @return  None
+ */
+
+/*****************************************************************************/
+/**
+ *
+ * XENV_MEM_FILL(void *DestPtr, char Data, unsigned Bytes)
+ *
+ * Fills an area of memory with constant data.
+ *
+ * @param   DestPtr is the destination address to set.
+ * @param   Data contains the value to set.
+ * @param   Bytes is the number of bytes to set.
+ *
+ * @return  None
+ */
+/*****************************************************************************/
+/**
+ *
+ * XENV_TIME_STAMP_GET(XTIME_STAMP *StampPtr)
+ *
+ * Samples the processor's or external timer's time base counter.
+ *
+ * @param   StampPtr is the storage for the retrieved time stamp.
+ *
+ * @return  None
+ */
+
+/*****************************************************************************/
+/**
+ *
+ * XENV_TIME_STAMP_DELTA_US(XTIME_STAMP *Stamp1Ptr, XTIME_STAMP* Stamp2Ptr)
+ *
+ * Computes the delta between the two time stamps.
+ *
+ * @param   Stamp1Ptr - First sampled time stamp.
+ * @param   Stamp1Ptr - Sedond sampled time stamp.
+ *
+ * @return  An unsigned int value with units of microseconds.
+ */
+
+/*****************************************************************************/
+/**
+ *
+ * XENV_TIME_STAMP_DELTA_MS(XTIME_STAMP *Stamp1Ptr, XTIME_STAMP* Stamp2Ptr)
+ *
+ * Computes the delta between the two time stamps.
+ *
+ * @param   Stamp1Ptr - First sampled time stamp.
+ * @param   Stamp1Ptr - Sedond sampled time stamp.
+ *
+ * @return  An unsigned int value with units of milliseconds.
+ */
+
+/*****************************************************************************//**
+ *
+ * XENV_USLEEP(unsigned delay)
+ *
+ * Delay the specified number of microseconds.
+ *
+ * @param   delay is the number of microseconds to delay.
+ *
+ * @return  None
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif            /* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xenv_standalone.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xenv_standalone.h
new file mode 100644
index 000000000..f18601874
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xenv_standalone.h
@@ -0,0 +1,368 @@
+/******************************************************************************
+*
+* Copyright (C) 2002 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xenv_standalone.h
+*
+* Defines common services specified by xenv.h.
+*
+* @note
+* 	This file is not intended to be included directly by driver code.
+* 	Instead, the generic xenv.h file is intended to be included by driver
+* 	code.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a wgr  02/28/07 Added cache handling macros.
+* 1.00a wgr  02/27/07 Simplified code. Deprecated old-style macro names.
+* 1.00a rmm  01/24/06 Implemented XENV_USLEEP. Assume implementation is being
+*                     used under Xilinx standalone BSP.
+* 1.00a xd   11/03/04 Improved support for doxygen.
+* 1.00a rmm  03/21/02 First release
+* 1.00a wgr  03/22/07 Converted to new coding style.
+* 1.00a rpm  06/29/07 Added udelay macro for standalone
+* 1.00a xd   07/19/07 Included xparameters.h as XPAR_ constants are referred
+*                     to in MICROBLAZE section
+* 1.00a ecm  09/19/08 updated for v7.20 of Microblaze, new functionality
+*
+* 

+*
+*
+******************************************************************************/
+
+#ifndef XENV_STANDALONE_H
+#define XENV_STANDALONE_H
+
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+/******************************************************************************
+ *
+ * Get the processor dependent includes
+ *
+ ******************************************************************************/
+
+#include 
+
+#if defined __MICROBLAZE__
+#  include "mb_interface.h"
+#  include "xparameters.h"   /* XPAR constants used below in MB section */
+
+#elif defined __PPC__
+#  include "sleep.h"
+#  include "xcache_l.h"      /* also include xcache_l.h for caching macros */
+#endif
+
+/******************************************************************************
+ *
+ * MEMCPY / MEMSET related macros.
+ *
+ * The following are straight forward implementations of memset and memcpy.
+ *
+ * NOTE: memcpy may not work if source and target memory area are overlapping.
+ *
+ ******************************************************************************/
+/*****************************************************************************/
+/**
+ *
+ * Copies a non-overlapping block of memory.
+ *
+ * @param	DestPtr
+ *		Destination address to copy data to.
+ *
+ * @param	SrcPtr
+ * 		Source address to copy data from.
+ *
+ * @param	Bytes
+ * 		Number of bytes to copy.
+ *
+ * @return	None.
+ *
+ * @note
+ * 		The use of XENV_MEM_COPY is deprecated. Use memcpy() instead.
+ *
+ * @note
+ * 		This implemention MAY BREAK work if source and target memory
+ * 		area are overlapping.
+ *
+ *****************************************************************************/
+
+#define XENV_MEM_COPY(DestPtr, SrcPtr, Bytes) \
+	memcpy((void *) DestPtr, (const void *) SrcPtr, (size_t) Bytes)
+
+
+
+/*****************************************************************************/
+/**
+ *
+ * Fills an area of memory with constant data.
+ *
+ * @param	DestPtr
+ *		Destination address to copy data to.
+ *
+ * @param	Data
+ * 		Value to set.
+ *
+ * @param	Bytes
+ * 		Number of bytes to copy.
+ *
+ * @return	None.
+ *
+ * @note
+ * 		The use of XENV_MEM_FILL is deprecated. Use memset() instead.
+ *
+ *****************************************************************************/
+
+#define XENV_MEM_FILL(DestPtr, Data, Bytes) \
+	memset((void *) DestPtr, (s32) Data, (size_t) Bytes)
+
+
+
+/******************************************************************************
+ *
+ * TIME related macros
+ *
+ ******************************************************************************/
+
+/**
+ * A structure that contains a time stamp used by other time stamp macros
+ * defined below. This structure is processor dependent.
+ */
+typedef s32 XENV_TIME_STAMP;
+
+/*****************************************************************************/
+/**
+ *
+ * Time is derived from the 64 bit PPC timebase register
+ *
+ * @param   StampPtr is the storage for the retrieved time stamp.
+ *
+ * @return  None.
+ *
+ * @note
+ *
+ * Signature: void XENV_TIME_STAMP_GET(XTIME_STAMP *StampPtr)
+ * 


+ * This macro must be implemented by the user.
+ *
+ *****************************************************************************/
+#define XENV_TIME_STAMP_GET(StampPtr)
+
+/*****************************************************************************/
+/**
+ *
+ * This macro is not yet implemented and always returns 0.
+ *
+ * @param   Stamp1Ptr is the first sampled time stamp.
+ * @param   Stamp2Ptr is the second sampled time stamp.
+ *
+ * @return  0
+ *
+ * @note
+ *
+ * This macro must be implemented by the user.
+ *
+ *****************************************************************************/
+#define XENV_TIME_STAMP_DELTA_US(Stamp1Ptr, Stamp2Ptr)     (0)
+
+/*****************************************************************************/
+/**
+ *
+ * This macro is not yet implemented and always returns 0.
+ *
+ * @param   Stamp1Ptr is the first sampled time stamp.
+ * @param   Stamp2Ptr is the second sampled time stamp.
+ *
+ * @return  0
+ *
+ * @note
+ *
+ * This macro must be implemented by the user.
+ *
+ *****************************************************************************/
+#define XENV_TIME_STAMP_DELTA_MS(Stamp1Ptr, Stamp2Ptr)     (0)
+
+/*****************************************************************************/
+/**
+ * XENV_USLEEP(unsigned delay)
+ *
+ * Delay the specified number of microseconds. Not implemented without OS
+ * support.
+ *
+ * @param	delay
+ * 		Number of microseconds to delay.
+ *
+ * @return	None.
+ *
+ *****************************************************************************/
+
+#ifdef __PPC__
+#define XENV_USLEEP(delay)	usleep(delay)
+#define udelay(delay)	usleep(delay)
+#else
+#define XENV_USLEEP(delay)
+#define udelay(delay)
+#endif
+
+
+/******************************************************************************
+ *
+ * CACHE handling macros / mappings
+ *
+ ******************************************************************************/
+/******************************************************************************
+ *
+ * Processor independent macros
+ *
+ ******************************************************************************/
+
+#define XCACHE_ENABLE_CACHE()	\
+		{ XCACHE_ENABLE_DCACHE(); XCACHE_ENABLE_ICACHE(); }
+
+#define XCACHE_DISABLE_CACHE()	\
+		{ XCACHE_DISABLE_DCACHE(); XCACHE_DISABLE_ICACHE(); }
+
+
+/******************************************************************************
+ *
+ * MicroBlaze case
+ *
+ * NOTE: Currently the following macros will only work on systems that contain
+ * only ONE MicroBlaze processor. Also, the macros will only be enabled if the
+ * system is built using a xparameters.h file.
+ *
+ ******************************************************************************/
+
+#if defined __MICROBLAZE__
+
+/* Check if MicroBlaze data cache was built into the core.
+ */
+#if (XPAR_MICROBLAZE_USE_DCACHE == 1)
+#  define XCACHE_ENABLE_DCACHE()		microblaze_enable_dcache()
+#  define XCACHE_DISABLE_DCACHE()		microblaze_disable_dcache()
+#  define XCACHE_INVALIDATE_DCACHE()  	microblaze_invalidate_dcache()
+
+#  define XCACHE_INVALIDATE_DCACHE_RANGE(Addr, Len) \
+			microblaze_invalidate_dcache_range((s32)(Addr), (s32)(Len))
+
+#if (XPAR_MICROBLAZE_DCACHE_USE_WRITEBACK == 1)
+#  define XCACHE_FLUSH_DCACHE()  		microblaze_flush_dcache()
+#  define XCACHE_FLUSH_DCACHE_RANGE(Addr, Len) \
+			microblaze_flush_dcache_range((s32)(Addr), (s32)(Len))
+#else
+#  define XCACHE_FLUSH_DCACHE()  		microblaze_invalidate_dcache()
+#  define XCACHE_FLUSH_DCACHE_RANGE(Addr, Len) \
+			microblaze_invalidate_dcache_range((s32)(Addr), (s32)(Len))
+#endif	/*XPAR_MICROBLAZE_DCACHE_USE_WRITEBACK*/
+
+#else
+#  define XCACHE_ENABLE_DCACHE()
+#  define XCACHE_DISABLE_DCACHE()
+#  define XCACHE_INVALIDATE_DCACHE_RANGE(Addr, Len)
+#  define XCACHE_FLUSH_DCACHE_RANGE(Addr, Len)
+#endif	/*XPAR_MICROBLAZE_USE_DCACHE*/
+
+
+/* Check if MicroBlaze instruction cache was built into the core.
+ */
+#if (XPAR_MICROBLAZE_USE_ICACHE == 1)
+#  define XCACHE_ENABLE_ICACHE()		microblaze_enable_icache()
+#  define XCACHE_DISABLE_ICACHE()		microblaze_disable_icache()
+
+#  define XCACHE_INVALIDATE_ICACHE()  	microblaze_invalidate_icache()
+
+#  define XCACHE_INVALIDATE_ICACHE_RANGE(Addr, Len) \
+			microblaze_invalidate_icache_range((s32)(Addr), (s32)(Len))
+
+#else
+#  define XCACHE_ENABLE_ICACHE()
+#  define XCACHE_DISABLE_ICACHE()
+#endif	/*XPAR_MICROBLAZE_USE_ICACHE*/
+
+
+/******************************************************************************
+ *
+ * PowerPC case
+ *
+ *   Note that the XCACHE_ENABLE_xxx functions are hardcoded to enable a
+ *   specific memory region (0x80000001). Each bit (0-30) in the regions
+ *   bitmask stands for 128MB of memory. Bit 31 stands for the upper 2GB
+ *   range.
+ *
+ *   regions    --> cached address range
+ *   ------------|--------------------------------------------------
+ *   0x80000000  | [0, 0x7FFFFFF]
+ *   0x00000001  | [0xF8000000, 0xFFFFFFFF]
+ *   0x80000001  | [0, 0x7FFFFFF],[0xF8000000, 0xFFFFFFFF]
+ *
+ ******************************************************************************/
+
+#elif defined __PPC__
+
+#define XCACHE_ENABLE_DCACHE()		XCache_EnableDCache(0x80000001)
+#define XCACHE_DISABLE_DCACHE()		XCache_DisableDCache()
+#define XCACHE_ENABLE_ICACHE()		XCache_EnableICache(0x80000001)
+#define XCACHE_DISABLE_ICACHE()		XCache_DisableICache()
+
+#define XCACHE_INVALIDATE_DCACHE_RANGE(Addr, Len) \
+		XCache_InvalidateDCacheRange((u32)(Addr), (u32)(Len))
+
+#define XCACHE_FLUSH_DCACHE_RANGE(Addr, Len) \
+		XCache_FlushDCacheRange((u32)(Addr), (u32)(Len))
+
+#define XCACHE_INVALIDATE_ICACHE()	XCache_InvalidateICache()
+
+
+/******************************************************************************
+ *
+ * Unknown processor / architecture
+ *
+ ******************************************************************************/
+
+#else
+/* #error "Unknown processor / architecture. Must be MicroBlaze or PowerPC." */
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif	/* #ifndef XENV_STANDALONE_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil-crt0.S b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil-crt0.S
new file mode 100644
index 000000000..cca2f0d69
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil-crt0.S
@@ -0,0 +1,130 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xil-crt0.S
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00 	pkp  02/10/14 First release
+* 5.04  pkp  12/18/15 Initialized global constructor for C++ applications
+* 5.04  pkp  02/19/16 Added timer configuration using XTime_StartTimer API when
+*		      TTC3 is present
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+#include "xparameters.h"
+	.file	"xil-crt0.S"
+	.section ".got2","aw"
+	.align	2
+
+	.text
+.Lsbss_start:
+	.long	__sbss_start
+
+.Lsbss_end:
+	.long	__sbss_end
+
+.Lbss_start:
+	.long	__bss_start__
+
+.Lbss_end:
+	.long	__bss_end__
+
+.Lstack:
+	.long	__stack
+
+
+	.globl	_startup
+
+_startup:
+	bl      __cpu_init		/* Initialize the CPU first (BSP provides this) */
+
+	mov	r0, #0
+
+	/* clear sbss */
+	ldr 	r1,.Lsbss_start		/* calculate beginning of the SBSS */
+	ldr	r2,.Lsbss_end		/* calculate end of the SBSS */
+
+.Lloop_sbss:
+	cmp	r1,r2
+	bge	.Lenclsbss		/* If no SBSS, no clearing required */
+	str	r0, [r1], #4
+	b	.Lloop_sbss
+
+.Lenclsbss:
+	/* clear bss */
+	ldr	r1,.Lbss_start		/* calculate beginning of the BSS */
+	ldr	r2,.Lbss_end		/* calculate end of the BSS */
+
+.Lloop_bss:
+	cmp	r1,r2
+	bge	.Lenclbss		/* If no BSS, no clearing required */
+	str	r0, [r1], #4
+	b	.Lloop_bss
+
+.Lenclbss:
+
+	/* set stack pointer */
+	ldr	r13,.Lstack		/* stack address */
+
+	/* configure the timer if TTC3 is present */
+#ifdef SLEEP_TIMER_BASEADDR
+	bl XTime_StartTimer
+#endif
+
+	/* run global constructors */
+	bl __libc_init_array
+
+	/* make sure argc and argv are valid */
+	mov	r0, #0
+	mov	r1, #0
+
+	bl	main			/* Jump to main C code */
+
+	/* Cleanup global constructors */
+	bl __libc_fini_array
+
+	bl	exit
+
+.Lexit:	/* should never get here */
+	b .Lexit
+
+.Lstart:
+	.size	_startup,.Lstart-_startup
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_assert.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_assert.c
new file mode 100644
index 000000000..42db07deb
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_assert.c
@@ -0,0 +1,146 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_assert.c
+*
+* This file contains basic assert related functions for Xilinx software IP.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date   Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a hbm  07/14/09 Initial release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/**
+ * This variable allows testing to be done easier with asserts. An assert
+ * sets this variable such that a driver can evaluate this variable
+ * to determine if an assert occurred.
+ */
+u32 Xil_AssertStatus;
+
+/**
+ * This variable allows the assert functionality to be changed for testing
+ * such that it does not wait infinitely. Use the debugger to disable the
+ * waiting during testing of asserts.
+ */
+/*s32 Xil_AssertWait = 1*/
+
+/* The callback function to be invoked when an assert is taken */
+static Xil_AssertCallback Xil_AssertCallbackRoutine = NULL;
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+*
+* Implement assert. Currently, it calls a user-defined callback function
+* if one has been set.  Then, it potentially enters an infinite loop depending
+* on the value of the Xil_AssertWait variable.
+*
+* @param    file is the name of the filename of the source
+* @param    line is the linenumber within File
+*
+* @return   None.
+*
+* @note     None.
+*
+******************************************************************************/
+void Xil_Assert(const char8 *File, s32 Line)
+{
+	s32 Xil_AssertWait = 1;
+	/* if the callback has been set then invoke it */
+	if (Xil_AssertCallbackRoutine != 0) {
+		(*Xil_AssertCallbackRoutine)(File, Line);
+	}
+
+	/* if specified, wait indefinitely such that the assert will show up
+	 * in testing
+	 */
+	while (Xil_AssertWait != 0) {
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* Set up a callback function to be invoked when an assert occurs. If there
+* was already a callback installed, then it is replaced.
+*
+* @param    routine is the callback to be invoked when an assert is taken
+*
+* @return   None.
+*
+* @note     This function has no effect if NDEBUG is set
+*
+******************************************************************************/
+void Xil_AssertSetCallback(Xil_AssertCallback Routine)
+{
+	Xil_AssertCallbackRoutine = Routine;
+}
+
+/*****************************************************************************/
+/**
+*
+* Null handler function. This follows the XInterruptHandler signature for
+* interrupt handlers. It can be used to assign a null handler (a stub) to an
+* interrupt controller vector table.
+*
+* @param    NullParameter is an arbitrary void pointer and not used.
+*
+* @return   None.
+*
+* @note     None.
+*
+******************************************************************************/
+void XNullHandler(void *NullParameter)
+{
+ (void *) NullParameter;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_assert.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_assert.h
new file mode 100644
index 000000000..7034bc9ad
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_assert.h
@@ -0,0 +1,189 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_assert.h
+*
+* This file contains assert related functions.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date   Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a hbm  07/14/09 First release
+* 

+*
+******************************************************************************/
+
+#ifndef XIL_ASSERT_H	/* prevent circular inclusions */
+#define XIL_ASSERT_H	/* by using protection macros */
+
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/***************************** Include Files *********************************/
+
+
+/************************** Constant Definitions *****************************/
+
+#define XIL_ASSERT_NONE     0U
+#define XIL_ASSERT_OCCURRED 1U
+#define XNULL NULL
+
+extern u32 Xil_AssertStatus;
+extern void Xil_Assert(const char8 *File, s32 Line);
+void XNullHandler(void *NullParameter);
+
+/**
+ * This data type defines a callback to be invoked when an
+ * assert occurs. The callback is invoked only when asserts are enabled
+ */
+typedef void (*Xil_AssertCallback) (const char8 *File, s32 Line);
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#ifndef NDEBUG
+
+/*****************************************************************************/
+/**
+* This assert macro is to be used for functions that do not return anything
+* (void). This in conjunction with the Xil_AssertWait boolean can be used to
+* accomodate tests so that asserts which fail allow execution to continue.
+*
+* @param    Expression is the expression to evaluate. If it evaluates to
+*           false, the assert occurs.
+*
+* @return   Returns void unless the Xil_AssertWait variable is true, in which
+*           case no return is made and an infinite loop is entered.
+*
+* @note     None.
+*
+******************************************************************************/
+#define Xil_AssertVoid(Expression)                \
+{                                                  \
+    if (Expression) {                              \
+        Xil_AssertStatus = XIL_ASSERT_NONE;       \
+    } else {                                       \
+        Xil_Assert(__FILE__, __LINE__);            \
+        Xil_AssertStatus = XIL_ASSERT_OCCURRED;   \
+        return;                                    \
+    }                                              \
+}
+
+/*****************************************************************************/
+/**
+* This assert macro is to be used for functions that do return a value. This in
+* conjunction with the Xil_AssertWait boolean can be used to accomodate tests
+* so that asserts which fail allow execution to continue.
+*
+* @param    Expression is the expression to evaluate. If it evaluates to false,
+*           the assert occurs.
+*
+* @return   Returns 0 unless the Xil_AssertWait variable is true, in which
+* 	    case no return is made and an infinite loop is entered.
+*
+* @note     None.
+*
+******************************************************************************/
+#define Xil_AssertNonvoid(Expression)             \
+{                                                  \
+    if (Expression) {                              \
+        Xil_AssertStatus = XIL_ASSERT_NONE;       \
+    } else {                                       \
+        Xil_Assert(__FILE__, __LINE__);            \
+        Xil_AssertStatus = XIL_ASSERT_OCCURRED;   \
+        return 0;                                  \
+    }                                              \
+}
+
+/*****************************************************************************/
+/**
+* Always assert. This assert macro is to be used for functions that do not
+* return anything (void). Use for instances where an assert should always
+* occur.
+*
+* @return Returns void unless the Xil_AssertWait variable is true, in which
+*	  case no return is made and an infinite loop is entered.
+*
+* @note   None.
+*
+******************************************************************************/
+#define Xil_AssertVoidAlways()                   \
+{                                                  \
+   Xil_Assert(__FILE__, __LINE__);                 \
+   Xil_AssertStatus = XIL_ASSERT_OCCURRED;        \
+   return;                                         \
+}
+
+/*****************************************************************************/
+/**
+* Always assert. This assert macro is to be used for functions that do return
+* a value. Use for instances where an assert should always occur.
+*
+* @return Returns void unless the Xil_AssertWait variable is true, in which
+*	  case no return is made and an infinite loop is entered.
+*
+* @note   None.
+*
+******************************************************************************/
+#define Xil_AssertNonvoidAlways()                \
+{                                                  \
+   Xil_Assert(__FILE__, __LINE__);                 \
+   Xil_AssertStatus = XIL_ASSERT_OCCURRED;        \
+   return 0;                                       \
+}
+
+
+#else
+
+#define Xil_AssertVoid(Expression)
+#define Xil_AssertVoidAlways()
+#define Xil_AssertNonvoid(Expression)
+#define Xil_AssertNonvoidAlways()
+
+#endif
+
+/************************** Function Prototypes ******************************/
+
+void Xil_AssertSetCallback(Xil_AssertCallback Routine);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif	/* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache.c
new file mode 100644
index 000000000..2ba080dff
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache.c
@@ -0,0 +1,580 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_cache.c
+*
+* Contains required functions for the ARM cache functionality.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver    Who Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 5.00 	pkp  02/20/14 First release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_cache.h"
+#include "xil_io.h"
+#include "xpseudo_asm.h"
+#include "xparameters.h"
+#include "xreg_cortexr5.h"
+#include "xil_exception.h"
+
+
+/************************** Variable Definitions *****************************/
+
+#define IRQ_FIQ_MASK 0xC0	/* Mask IRQ and FIQ interrupts in cpsr */
+
+
+extern s32  _stack_end;
+extern s32  __undef_stack;
+
+/****************************************************************************/
+/************************** Function Prototypes ******************************/
+
+/****************************************************************************
+*
+* Enable the Data cache.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_DCacheEnable(void)
+{
+	register u32 CtrlReg;
+
+	/* enable caches only if they are disabled */
+	CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+
+	if ((CtrlReg & XREG_CP15_CONTROL_C_BIT)==0x00000000U) {
+		/* invalidate the Data cache */
+		Xil_DCacheInvalidate();
+
+		/* enable the Data cache */
+		CtrlReg |= (XREG_CP15_CONTROL_C_BIT);
+
+		mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	}
+}
+
+/****************************************************************************
+*
+* Disable the Data cache.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_DCacheDisable(void)
+{
+	register u32 CtrlReg;
+
+	/* clean and invalidate the Data cache */
+	Xil_DCacheFlush();
+
+	/* disable the Data cache */
+	CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+
+	CtrlReg &= ~(XREG_CP15_CONTROL_C_BIT);
+
+	mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+}
+
+/****************************************************************************
+*
+* Invalidate the entire Data cache.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_DCacheInvalidate(void)
+{
+	u32 currmask;
+	u32 stack_start,stack_end,stack_size;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+
+	stack_end = (u32 )&_stack_end;
+	stack_start = (u32 )&__undef_stack;
+	stack_size = stack_start-stack_end;
+
+	/* Flush stack memory to save return address */
+	Xil_DCacheFlushRange(stack_end, stack_size);
+
+	mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+
+	/*invalidate all D cache*/
+	mtcp(XREG_CP15_INVAL_DC_ALL, 0);
+
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+*
+* Invalidate a Data cache line. If the byte specified by the address (adr)
+* is cached by the Data cache, the cacheline containing that byte is
+* invalidated.	If the cacheline is modified (dirty), the modified contents
+* are lost and are NOT written to system memory before the line is
+* invalidated.
+*
+* @param	Address to be flushed.
+*
+* @return	None.
+*
+* @note		The bottom 4 bits are set to 0, forced by architecture.
+*
+****************************************************************************/
+void Xil_DCacheInvalidateLine(INTPTR adr)
+{
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+	mtcp(XREG_CP15_INVAL_DC_LINE_MVA_POC, (adr & (~0x1F)));
+
+		/* Wait for invalidate to complete */
+	dsb();
+
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+*
+* Invalidate the Data cache for the given address range.
+* If the bytes specified by the address (adr) are cached by the Data cache,
+* the cacheline containing that byte is invalidated.	If the cacheline
+* is modified (dirty), the modified contents are lost and are NOT
+* written to system memory before the line is invalidated.
+*
+* @param	Start address of range to be invalidated.
+* @param	Length of range to be invalidated in bytes.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_DCacheInvalidateRange(INTPTR adr, u32 len)
+{
+	const u32 cacheline = 32U;
+	u32 end;
+	u32 tempadr = adr;
+	u32 tempend;
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	if (len != 0U) {
+		end = tempadr + len;
+		tempend = end;
+		/* Select L1 Data cache in CSSR */
+		mtcp(XREG_CP15_CACHE_SIZE_SEL, 0U);
+
+		if ((tempadr & (cacheline-1U)) != 0U) {
+			tempadr &= (~(cacheline - 1U));
+
+			Xil_DCacheFlushLine(tempadr);
+		}
+		if ((tempend & (cacheline-1U)) != 0U) {
+			tempend &= (~(cacheline - 1U));
+
+			Xil_DCacheFlushLine(tempend);
+		}
+
+		while (tempadr < tempend) {
+
+		/* Invalidate Data cache line */
+		asm_inval_dc_line_mva_poc(tempadr);
+
+		tempadr += cacheline;
+		}
+	}
+
+	dsb();
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+*
+* Flush the entire Data cache.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_DCacheFlush(void)
+{
+	register u32 CsidReg, C7Reg;
+	u32 CacheSize, LineSize, NumWays;
+	u32 Way, WayIndex, Set, SetIndex, NumSet;
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	/* Select cache level 0 and D cache in CSSR */
+	mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+
+	CsidReg = mfcp(XREG_CP15_CACHE_SIZE_ID);
+
+	/* Determine Cache Size */
+
+	CacheSize = (CsidReg >> 13U) & 0x000001FFU;
+	CacheSize += 0x00000001U;
+	CacheSize *= (u32)128;    /* to get number of bytes */
+
+	/* Number of Ways */
+	NumWays = (CsidReg & 0x000003ffU) >> 3U;
+	NumWays += 0x00000001U;
+
+	/* Get the cacheline size, way size, index size from csidr */
+	LineSize = (CsidReg & 0x00000007U) + 0x00000004U;
+
+	NumSet = CacheSize/NumWays;
+	NumSet /= (0x00000001U << LineSize);
+
+	Way = 0U;
+	Set = 0U;
+
+	/* Invalidate all the cachelines */
+	for (WayIndex = 0U; WayIndex < NumWays; WayIndex++) {
+		for (SetIndex = 0U; SetIndex < NumSet; SetIndex++) {
+			C7Reg = Way | Set;
+			/* Flush by Set/Way */
+			asm_clean_inval_dc_line_sw(C7Reg);
+
+			Set += (0x00000001U << LineSize);
+		}
+		Set = 0U;
+		Way += 0x40000000U;
+	}
+
+	/* Wait for flush to complete */
+	dsb();
+	mtcpsr(currmask);
+
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+*
+* Flush a Data cache line. If the byte specified by the address (adr)
+* is cached by the Data cache, the cacheline containing that byte is
+* invalidated.	If the cacheline is modified (dirty), the entire
+* contents of the cacheline are written to system memory before the
+* line is invalidated.
+*
+* @param	Address to be flushed.
+*
+* @return	None.
+*
+* @note		The bottom 4 bits are set to 0, forced by architecture.
+*
+****************************************************************************/
+void Xil_DCacheFlushLine(INTPTR adr)
+{
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+
+	mtcp(XREG_CP15_CLEAN_INVAL_DC_LINE_MVA_POC, (adr & (~0x1F)));
+
+		/* Wait for flush to complete */
+	dsb();
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+* Flush the Data cache for the given address range.
+* If the bytes specified by the address (adr) are cached by the Data cache,
+* the cacheline containing that byte is invalidated.	If the cacheline
+* is modified (dirty), the written to system memory first before the
+* before the line is invalidated.
+*
+* @param	Start address of range to be flushed.
+* @param	Length of range to be flushed in bytes.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_DCacheFlushRange(INTPTR adr, u32 len)
+{
+	u32 LocalAddr = adr;
+	const u32 cacheline = 32U;
+	u32 end;
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	if (len != 0x00000000U) {
+		/* Back the starting address up to the start of a cache line
+		 * perform cache operations until adr+len
+		 */
+		end = LocalAddr + len;
+		LocalAddr &= ~(cacheline - 1U);
+
+		while (LocalAddr < end) {
+			/* Flush Data cache line */
+			asm_clean_inval_dc_line_mva_poc(LocalAddr);
+
+			LocalAddr += cacheline;
+		}
+	}
+	dsb();
+	mtcpsr(currmask);
+}
+/****************************************************************************
+*
+* Store a Data cache line. If the byte specified by the address (adr)
+* is cached by the Data cache and the cacheline is modified (dirty),
+* the entire contents of the cacheline are written to system memory.
+* After the store completes, the cacheline is marked as unmodified
+* (not dirty).
+*
+* @param	Address to be stored.
+*
+* @return	None.
+*
+* @note		The bottom 4 bits are set to 0, forced by architecture.
+*
+****************************************************************************/
+void Xil_DCacheStoreLine(INTPTR adr)
+{
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	mtcp(XREG_CP15_CACHE_SIZE_SEL, 0);
+	mtcp(XREG_CP15_CLEAN_DC_LINE_MVA_POC, (adr & (~0x1F)));
+
+	/* Wait for store to complete */
+	dsb();
+	isb();
+
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+*
+* Enable the instruction cache.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_ICacheEnable(void)
+{
+	register u32 CtrlReg;
+
+	/* enable caches only if they are disabled */
+
+	CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+
+	if ((CtrlReg & XREG_CP15_CONTROL_I_BIT)==0x00000000U) {
+		/* invalidate the instruction cache */
+		mtcp(XREG_CP15_INVAL_IC_POU, 0);
+
+		/* enable the instruction cache */
+		CtrlReg |= (XREG_CP15_CONTROL_I_BIT);
+
+		mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	}
+}
+
+/****************************************************************************
+*
+* Disable the instruction cache.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_ICacheDisable(void)
+{
+	register u32 CtrlReg;
+
+	dsb();
+
+	/* invalidate the instruction cache */
+	mtcp(XREG_CP15_INVAL_IC_POU, 0);
+
+		/* disable the instruction cache */
+
+	CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+
+	CtrlReg &= ~(XREG_CP15_CONTROL_I_BIT);
+
+	mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+}
+
+/****************************************************************************
+*
+* Invalidate the entire instruction cache.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_ICacheInvalidate(void)
+{
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	mtcp(XREG_CP15_CACHE_SIZE_SEL, 1);
+
+	/* invalidate the instruction cache */
+	mtcp(XREG_CP15_INVAL_IC_POU, 0);
+
+	/* Wait for invalidate to complete */
+	dsb();
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+*
+* Invalidate an instruction cache line.	If the instruction specified by the
+* parameter adr is cached by the instruction cache, the cacheline containing
+* that instruction is invalidated.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		The bottom 4 bits are set to 0, forced by architecture.
+*
+****************************************************************************/
+void Xil_ICacheInvalidateLine(INTPTR adr)
+{
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+
+	mtcp(XREG_CP15_CACHE_SIZE_SEL, 1);
+	mtcp(XREG_CP15_INVAL_IC_LINE_MVA_POU, (adr & (~0x1F)));
+
+		/* Wait for invalidate to complete */
+	dsb();
+	mtcpsr(currmask);
+}
+
+/****************************************************************************
+*
+* Invalidate the instruction cache for the given address range.
+* If the bytes specified by the address (adr) are cached by the Data cache,
+* the cacheline containing that byte is invalidated. If the cacheline
+* is modified (dirty), the modified contents are lost and are NOT
+* written to system memory before the line is invalidated.
+*
+* @param	Start address of range to be invalidated.
+* @param	Length of range to be invalidated in bytes.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_ICacheInvalidateRange(INTPTR adr, u32 len)
+{
+	u32 LocalAddr = adr;
+	const u32 cacheline = 32U;
+	u32 end;
+	u32 currmask;
+
+	currmask = mfcpsr();
+	mtcpsr(currmask | IRQ_FIQ_MASK);
+	if (len != 0x00000000U) {
+		/* Back the starting address up to the start of a cache line
+		 * perform cache operations until adr+len
+		 */
+		end = LocalAddr + len;
+		LocalAddr = LocalAddr & ~(cacheline - 1U);
+
+		/* Select cache L0 I-cache in CSSR */
+		mtcp(XREG_CP15_CACHE_SIZE_SEL, 1U);
+
+		while (LocalAddr < end) {
+
+			/* Invalidate L1 I-cache line */
+			asm_inval_ic_line_mva_pou(LocalAddr);
+
+			LocalAddr += cacheline;
+		}
+	}
+
+	/* Wait for invalidate to complete */
+	dsb();
+	mtcpsr(currmask);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache.h
new file mode 100644
index 000000000..581db3f16
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache.h
@@ -0,0 +1,89 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_cache.h
+*
+* Contains required functions for the ARM cache functionality
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 5.00 	pkp  02/20/14 First release
+* 

+*
+******************************************************************************/
+#ifndef XIL_CACHE_H
+#define XIL_CACHE_H
+
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define asm_inval_dc_line_mva_poc(param) __asm__ __volatile__("mcr " \
+		XREG_CP15_INVAL_DC_LINE_MVA_POC :: "r" (param))
+
+#define asm_clean_inval_dc_line_sw(param) __asm__ __volatile__("mcr " \
+		XREG_CP15_CLEAN_INVAL_DC_LINE_SW :: "r" (param))
+
+#define asm_clean_inval_dc_line_mva_poc(param) __asm__ __volatile__("mcr " \
+		XREG_CP15_CLEAN_INVAL_DC_LINE_MVA_POC :: "r" (param))
+
+#define asm_inval_ic_line_mva_pou(param) __asm__ __volatile__("mcr " \
+		XREG_CP15_INVAL_IC_LINE_MVA_POU :: "r" (param))
+
+void Xil_DCacheEnable(void);
+void Xil_DCacheDisable(void);
+void Xil_DCacheInvalidate(void);
+void Xil_DCacheInvalidateRange(INTPTR adr, u32 len);
+void Xil_DCacheFlush(void);
+void Xil_DCacheFlushRange(INTPTR adr, u32 len);
+void Xil_DCacheInvalidateLine(INTPTR adr);
+void Xil_DCacheFlushLine(INTPTR adr);
+void Xil_DCacheStoreLine(INTPTR adr);
+
+void Xil_ICacheEnable(void);
+void Xil_ICacheDisable(void);
+void Xil_ICacheInvalidate(void);
+void Xil_ICacheInvalidateRange(INTPTR adr, u32 len);
+void Xil_ICacheInvalidateLine(INTPTR adr);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache_vxworks.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache_vxworks.h
new file mode 100644
index 000000000..6e8cfa75f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_cache_vxworks.h
@@ -0,0 +1,93 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_cache_vxworks.h
+*
+* Contains the cache related functions for VxWorks that is wrapped by
+* xil_cache.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date	 Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a hbm  12/11/09 Initial release
+*
+* 

+*
+* @note
+*
+******************************************************************************/
+
+#ifndef XIL_CACHE_VXWORKS_H
+#define XIL_CACHE_VXWORKS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "vxWorks.h"
+#include "vxLib.h"
+#include "sysLibExtra.h"
+#include "cacheLib.h"
+
+#if (CPU_FAMILY==PPC)
+
+#define Xil_DCacheEnable()		cacheEnable(DATA_CACHE)
+
+#define Xil_DCacheDisable()		cacheDisable(DATA_CACHE)
+
+#define Xil_DCacheInvalidateRange(Addr, Len) \
+		cacheInvalidate(DATA_CACHE, (void *)(Addr), (Len))
+
+#define Xil_DCacheFlushRange(Addr, Len) \
+		cacheFlush(DATA_CACHE, (void *)(Addr), (Len))
+
+#define Xil_ICacheEnable()		cacheEnable(INSTRUCTION_CACHE)
+
+#define Xil_ICacheDisable()		cacheDisable(INSTRUCTION_CACHE)
+
+#define Xil_ICacheInvalidateRange(Addr, Len) \
+		cacheInvalidate(INSTRUCTION_CACHE, (void *)(Addr), (Len))
+
+
+#else
+#error "Unknown processor / architecture. Must be PPC for VxWorks."
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_exception.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_exception.c
new file mode 100644
index 000000000..f41976eec
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_exception.c
@@ -0,0 +1,218 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xil_exception.c
+*
+* This file contains low-level driver functions for the Cortex R5 exception
+* Handler.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00 	pkp  	 02/20/14 First release
+*
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_exception.h"
+#include "xpseudo_asm.h"
+#include "xdebug.h"
+/************************** Constant Definitions ****************************/
+
+/**************************** Type Definitions ******************************/
+
+typedef struct {
+	Xil_ExceptionHandler Handler;
+	void *Data;
+} XExc_VectorTableEntry;
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Function Prototypes *****************************/
+static void Xil_ExceptionNullHandler(void *Data);
+/************************** Variable Definitions *****************************/
+/*
+ * Exception vector table to store handlers for each exception vector.
+ */
+XExc_VectorTableEntry XExc_VectorTable[XIL_EXCEPTION_ID_LAST + 1] =
+{
+	{Xil_ExceptionNullHandler, NULL},
+	{Xil_ExceptionNullHandler, NULL},
+	{Xil_ExceptionNullHandler, NULL},
+	{Xil_PrefetchAbortHandler, NULL},
+	{Xil_DataAbortHandler, NULL},
+	{Xil_ExceptionNullHandler, NULL},
+	{Xil_ExceptionNullHandler, NULL},
+};
+
+/*****************************************************************************/
+
+/****************************************************************************/
+/**
+*
+* This function is a stub Handler that is the default Handler that gets called
+* if the application has not setup a Handler for a specific  exception. The
+* function interface has to match the interface specified for a Handler even
+* though none of the arguments are used.
+*
+* @param	Data is unused by this function.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void Xil_ExceptionNullHandler(void *Data)
+{
+	(void *)Data;
+DieLoop: goto DieLoop;
+}
+
+/****************************************************************************/
+/**
+* The function is a common API used to initialize exception handlers across all
+* processors supported. For ARM CortexR5, the exception handlers are being
+* initialized statically and hence this function does not do anything.
+*
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void Xil_ExceptionInit(void)
+{
+	return;
+}
+
+/*****************************************************************************/
+/**
+*
+* Makes the connection between the Id of the exception source and the
+* associated Handler that is to run when the exception is recognized. The
+* argument provided in this call as the Data is used as the argument
+* for the Handler when it is called.
+*
+* @param	exception_id contains the ID of the exception source and should
+*		be in the range of 0 to XIL_EXCEPTION_ID_LAST.
+		See xil_exception_l.h for further information.
+* @param	Handler to the Handler for that exception.
+* @param	Data is a reference to Data that will be passed to the
+*		Handler when it gets called.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_ExceptionRegisterHandler(u32 Exception_id,
+				    Xil_ExceptionHandler Handler,
+				    void *Data)
+{
+	XExc_VectorTable[Exception_id].Handler = Handler;
+	XExc_VectorTable[Exception_id].Data = Data;
+}
+
+/*****************************************************************************/
+/**
+*
+* Removes the Handler for a specific exception Id. The stub Handler is then
+* registered for this exception Id.
+*
+* @param	exception_id contains the ID of the exception source and should
+*		be in the range of 0 to XIL_EXCEPTION_ID_LAST.
+*		See xil_exception_l.h for further information.
+
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_ExceptionRemoveHandler(u32 Exception_id)
+{
+	Xil_ExceptionRegisterHandler(Exception_id,
+				       Xil_ExceptionNullHandler,
+				       NULL);
+}
+/*****************************************************************************/
+/**
+*
+* Default Data abort handler which prints a debug message on console if
+* Debug flag is enabled
+*
+* @param	None
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+
+void Xil_DataAbortHandler(void *CallBackRef){
+
+	xdbg_printf(XDBG_DEBUG_ERROR, "Data abort \n");
+	while(1) {
+		;
+	}
+}
+
+/*****************************************************************************/
+/**
+*
+* Default Prefetch abort handler which printsa debug message on console if
+* Debug flag is enabled
+*
+* @param	None
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void Xil_PrefetchAbortHandler(void *CallBackRef){
+
+	xdbg_printf(XDBG_DEBUG_ERROR, "Prefetch abort \n");
+	while(1) {
+		;
+	}
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_exception.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_exception.h
new file mode 100644
index 000000000..9d903175c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_exception.h
@@ -0,0 +1,215 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_exception.h
+*
+* This header file contains ARM Cortex R5 specific exception related APIs.
+* For exception related functions that can be used across all Xilinx supported
+* processors, please use xil_exception.h.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00 	pkp  02/20/14 First release
+* 

+*
+******************************************************************************/
+
+#ifndef XIL_EXCEPTION_H /* prevent circular inclusions */
+#define XIL_EXCEPTION_H /* by using protection macros */
+
+/***************************** Include Files ********************************/
+
+#include "xil_types.h"
+#include "xpseudo_asm.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/************************** Constant Definitions ****************************/
+
+#define XIL_EXCEPTION_FIQ	XREG_CPSR_FIQ_ENABLE
+#define XIL_EXCEPTION_IRQ	XREG_CPSR_IRQ_ENABLE
+#define XIL_EXCEPTION_ALL	(XREG_CPSR_FIQ_ENABLE | XREG_CPSR_IRQ_ENABLE)
+
+#define XIL_EXCEPTION_ID_FIRST			0U
+#define XIL_EXCEPTION_ID_RESET			0U
+#define XIL_EXCEPTION_ID_UNDEFINED_INT		1U
+#define XIL_EXCEPTION_ID_SWI_INT		2U
+#define XIL_EXCEPTION_ID_PREFETCH_ABORT_INT	3U
+#define XIL_EXCEPTION_ID_DATA_ABORT_INT		4U
+#define XIL_EXCEPTION_ID_IRQ_INT		5U
+#define XIL_EXCEPTION_ID_FIQ_INT		6U
+#define XIL_EXCEPTION_ID_LAST			6U
+
+/*
+ * XIL_EXCEPTION_ID_INT is defined for all Xilinx processors.
+ */
+#define XIL_EXCEPTION_ID_INT	XIL_EXCEPTION_ID_IRQ_INT
+
+/**************************** Type Definitions ******************************/
+
+/**
+ * This typedef is the exception handler function.
+ */
+typedef void (*Xil_ExceptionHandler)(void *data);
+typedef void (*Xil_InterruptHandler)(void *data);
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/****************************************************************************/
+/**
+* Enable Exceptions.
+*
+* @param	Mask for exceptions to be enabled.
+*
+* @return	None.
+*
+* @note		If bit is 0, exception is enabled.
+*		C-Style signature: void Xil_ExceptionEnableMask(Mask)
+*
+******************************************************************************/
+#define Xil_ExceptionEnableMask(Mask)	\
+		mtcpsr(mfcpsr() & ~ ((Mask) & XIL_EXCEPTION_ALL))
+
+
+/****************************************************************************/
+/**
+* Enable the IRQ exception.
+*
+* @return   None.
+*
+* @note     None.
+*
+******************************************************************************/
+#define Xil_ExceptionEnable() \
+		Xil_ExceptionEnableMask(XIL_EXCEPTION_IRQ)
+
+/****************************************************************************/
+/**
+* Disable Exceptions.
+*
+* @param	Mask for exceptions to be enabled.
+*
+* @return	None.
+*
+* @note		If bit is 1, exception is disabled.
+*		C-Style signature: Xil_ExceptionDisableMask(Mask)
+*
+******************************************************************************/
+#define Xil_ExceptionDisableMask(Mask)	\
+		mtcpsr(mfcpsr() | ((Mask) & XIL_EXCEPTION_ALL))
+
+/****************************************************************************/
+/**
+* Disable the IRQ exception.
+*
+* @return   None.
+*
+* @note     None.
+*
+******************************************************************************/
+#define Xil_ExceptionDisable() \
+		Xil_ExceptionDisableMask(XIL_EXCEPTION_IRQ)
+
+/****************************************************************************/
+/**
+* Enable nested interrupts by clearing the I and F bits it CPSR
+*
+* @return   None.
+*
+* @note     This macro is supposed to be used from interrupt handlers. In the
+*			interrupt handler the interrupts are disabled by default (I and F
+*			are 1). To allow nesting of interrupts, this macro should be
+*			used. It clears the I and F bits by changing the ARM mode to
+*			system mode. Once these bits are cleared and provided the
+*			preemption of interrupt conditions are met in the GIC, nesting of
+*			interrupts will start happening.
+*			Caution: This macro must be used with caution. Before calling this
+*			macro, the user must ensure that the source of the current IRQ
+*			is appropriately cleared. Otherwise, as soon as we clear the I and
+*			F bits, there can be an infinite loop of interrupts with an
+*			eventual crash (all the stack space getting consumed).
+******************************************************************************/
+#define Xil_EnableNestedInterrupts() \
+		__asm__ __volatile__ ("mrs     lr, spsr");  \
+		__asm__ __volatile__ ("stmfd   sp!, {lr}"); \
+		__asm__ __volatile__ ("msr     cpsr_c, #0x1F"); \
+		__asm__ __volatile__ ("stmfd   sp!, {lr}");
+
+/****************************************************************************/
+/**
+* Disable the nested interrupts by setting the I and F bits.
+*
+* @return   None.
+*
+* @note     This macro is meant to be called in the interrupt service routines.
+*			This macro cannot be used independently. It can only be used when
+*			nesting of interrupts have been enabled by using the macro
+*			Xil_EnableNestedInterrupts(). In a typical flow, the user first
+*			calls the Xil_EnableNestedInterrupts in the ISR at the appropriate
+*			point. The user then must call this macro before exiting the interrupt
+*			service routine. This macro puts the ARM back in IRQ/FIQ mode and
+*			hence sets back the I and F bits.
+******************************************************************************/
+#define Xil_DisableNestedInterrupts() \
+		__asm__ __volatile__ ("ldmfd   sp!, {lr}");   \
+		__asm__ __volatile__ ("msr     cpsr_c, #0x92"); \
+		__asm__ __volatile__ ("ldmfd   sp!, {lr}"); \
+		__asm__ __volatile__ ("msr     spsr_cxsf, lr");
+
+/************************** Variable Definitions ****************************/
+
+/************************** Function Prototypes *****************************/
+
+extern void Xil_ExceptionRegisterHandler(u32 Exception_id,
+					 Xil_ExceptionHandler Handler,
+					 void *Data);
+
+extern void Xil_ExceptionRemoveHandler(u32 Exception_id);
+
+extern void Xil_ExceptionInit(void);
+
+extern void Xil_DataAbortHandler(void *CallBackRef);
+
+extern void Xil_PrefetchAbortHandler(void *CallBackRef);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XIL_EXCEPTION_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_hal.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_hal.h
new file mode 100644
index 000000000..d4434d07f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_hal.h
@@ -0,0 +1,61 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_hal.h
+*
+* Contains all the HAL header files.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date	 Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a hbm  07/28/09 Initial release
+*
+* 

+*
+* @note
+*
+******************************************************************************/
+
+#ifndef XIL_HAL_H
+#define XIL_HAL_H
+
+#include "xil_cache.h"
+#include "xil_io.h"
+#include "xil_assert.h"
+#include "xil_exception.h"
+#include "xil_types.h"
+
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_io.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_io.c
new file mode 100644
index 000000000..90fd22559
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_io.c
@@ -0,0 +1,380 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_io.c
+*
+* Contains I/O functions for memory-mapped or non-memory-mapped I/O
+* architectures.  These functions encapsulate Cortex R5 architecture-specific
+* I/O requirements.
+*
+* @note
+*
+* This file contains architecture-dependent code.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00 	pkp  	 02/20/14 First release
+* 

+******************************************************************************/
+
+
+/***************************** Include Files *********************************/
+#include "xil_io.h"
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xpseudo_asm.h"
+#include "xreg_cortexr5.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+*
+* Performs an input operation for an 8-bit memory location by reading from the
+* specified address and returning the Value read from that address.
+*
+* @param	Addr contains the address to perform the input operation
+*		at.
+*
+* @return	The Value read from the specified input address.
+*
+* @note		None.
+*
+******************************************************************************/
+u8 Xil_In8(INTPTR Addr)
+{
+	return *(volatile u8 *) Addr;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an input operation for a 16-bit memory location by reading from the
+* specified address and returning the Value read from that address.
+*
+* @param	Addr contains the address to perform the input operation
+*		at.
+*
+* @return	The Value read from the specified input address.
+*
+* @note		None.
+*
+******************************************************************************/
+u16 Xil_In16(INTPTR Addr)
+{
+	return *(volatile u16 *) Addr;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an input operation for a 32-bit memory location by reading from the
+* specified address and returning the Value read from that address.
+*
+* @param	Addr contains the address to perform the input operation
+*		at.
+*
+* @return	The Value read from the specified input address.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 Xil_In32(INTPTR Addr)
+{
+	return *(volatile u32 *) Addr;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an output operation for an 8-bit memory location by writing the
+* specified Value to the the specified address.
+*
+* @param	Addr contains the address to perform the output operation
+*		at.
+* @param	Value contains the Value to be output at the specified address.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void Xil_Out8(INTPTR Addr, u8 Value)
+{
+	volatile u8 *LocalAddr = (u8 *)Addr;
+	*LocalAddr = Value;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an output operation for a 16-bit memory location by writing the
+* specified Value to the the specified address.
+*
+* @param	Addr contains the address to perform the output operation
+*		at.
+* @param	Value contains the Value to be output at the specified address.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void Xil_Out16(INTPTR Addr, u16 Value)
+{
+	volatile u16 *LocalAddr = (u16 *)Addr;
+	*LocalAddr = Value;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an output operation for a 32-bit memory location by writing the
+* specified Value to the the specified address.
+*
+* @param	Addr contains the address to perform the output operation
+*		at.
+* @param	Value contains the Value to be output at the specified address.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void Xil_Out32(INTPTR Addr, u32 Value)
+{
+	volatile u32 *LocalAddr = (u32 *)Addr;
+	*LocalAddr = Value;
+}
+/*****************************************************************************/
+/**
+*
+* Performs an output operation for a 64-bit memory location by writing the
+* specified Value to the the specified address.
+*
+* @param	Addr contains the address to perform the output operation
+*		at.
+* @param	Value contains the Value to be output at the specified address.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void Xil_Out64(INTPTR Addr, u64 Value)
+{
+	volatile u64 *LocalAddr = (u64 *)Addr;
+	*LocalAddr = Value;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an input operation for a 64-bit memory location by reading the
+* specified Value to the the specified address.
+*
+* @param	Addr contains the address to perform the output operation
+*		at.
+* @param	Value contains the Value to be output at the specified address.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+u64 Xil_In64(INTPTR Addr)
+{
+	return *(volatile u64 *) Addr;
+}
+/*****************************************************************************/
+/**
+*
+* Performs an input operation for a 16-bit memory location by reading from the
+* specified address and returning the byte-swapped Value read from that
+* address.
+*
+* @param	Addr contains the address to perform the input operation
+*		at.
+*
+* @return	The byte-swapped Value read from the specified input address.
+*
+* @note		None.
+*
+******************************************************************************/
+u16 Xil_In16BE(INTPTR Addr)
+{
+	u16 temp;
+	u16 result;
+
+	temp = Xil_In16(Addr);
+
+	result = Xil_EndianSwap16(temp);
+
+	return result;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an input operation for a 32-bit memory location by reading from the
+* specified address and returning the byte-swapped Value read from that
+* address.
+*
+* @param	Addr contains the address to perform the input operation
+*		at.
+*
+* @return	The byte-swapped Value read from the specified input address.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 Xil_In32BE(INTPTR Addr)
+{
+	u32 temp;
+	u32 result;
+
+	temp = Xil_In32(Addr);
+
+	result = Xil_EndianSwap32(temp);
+
+	return result;
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an output operation for a 16-bit memory location by writing the
+* specified Value to the the specified address. The Value is byte-swapped
+* before being written.
+*
+* @param	OutAddress contains the address to perform the output operation
+*		at.
+* @param	Value contains the Value to be output at the specified address.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void Xil_Out16BE(INTPTR Addr, u16 Value)
+{
+	u16 temp;
+
+	temp = Xil_EndianSwap16(Value);
+
+    Xil_Out16(Addr, temp);
+}
+
+/*****************************************************************************/
+/**
+*
+* Performs an output operation for a 32-bit memory location by writing the
+* specified Value to the the specified address. The Value is byte-swapped
+* before being written.
+*
+* @param	OutAddress contains the address to perform the output operation
+*		at.
+* @param	Value contains the Value to be output at the specified address.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void Xil_Out32BE(INTPTR Addr, u32 Value)
+{
+	u32 temp;
+
+	temp = Xil_EndianSwap32(Value);
+
+    Xil_Out32(Addr, temp);
+}
+
+/*****************************************************************************/
+/**
+*
+* Perform a 16-bit endian converion.
+*
+* @param	Data contains the value to be converted.
+*
+* @return	converted value.
+*
+* @note		None.
+*
+******************************************************************************/
+u16 Xil_EndianSwap16(u16 Data)
+{
+	return (u16) (((Data & 0xFF00U) >> 8U) | ((Data & 0x00FFU) << 8U));
+}
+
+/*****************************************************************************/
+/**
+*
+* Perform a 32-bit endian converion.
+*
+* @param	Data contains the value to be converted.
+*
+* @return	converted value.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 Xil_EndianSwap32(u32 Data)
+{
+	u16 LoWord;
+	u16 HiWord;
+
+	/* get each of the half words from the 32 bit word */
+
+	LoWord = (u16) (Data & 0x0000FFFFU);
+	HiWord = (u16) ((Data & 0xFFFF0000U) >> 16U);
+
+	/* byte swap each of the 16 bit half words */
+
+	LoWord = (((LoWord & 0xFF00U) >> 8U) | ((LoWord & 0x00FFU) << 8U));
+	HiWord = (((HiWord & 0xFF00U) >> 8U) | ((HiWord & 0x00FFU) << 8U));
+
+	/* swap the half words before returning the value */
+
+	return ((((u32)LoWord) << 16U) | (u32)HiWord);
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_io.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_io.h
new file mode 100644
index 000000000..18cdebf7a
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_io.h
@@ -0,0 +1,244 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_io.h
+*
+* This file contains the interface for the general IO component, which
+* encapsulates the Input/Output functions for processors that do not
+* require any special I/O handling.
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00 	pkp  	 02/20/14 First release
+* 

+******************************************************************************/
+
+#ifndef XIL_IO_H           /* prevent circular inclusions */
+#define XIL_IO_H           /* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xpseudo_asm.h"
+#include "xil_printf.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#if defined __GNUC__
+#  define SYNCHRONIZE_IO	dmb()
+#  define INST_SYNC		isb()
+#  define DATA_SYNC		dsb()
+#else
+#  define SYNCHRONIZE_IO
+#  define INST_SYNC
+#  define DATA_SYNC
+#endif /* __GNUC__ */
+
+/*****************************************************************************/
+/**
+*
+* Perform an big-endian input operation for a 16-bit memory location
+* by reading from the specified address and returning the Value read from
+* that address.
+*
+* @param	Addr contains the address to perform the input operation at.
+*
+* @return	The Value read from the specified input address with the
+*		proper endianness. The return Value has the same endianness
+*		as that of the processor, i.e. if the processor is
+*		little-engian, the return Value is the byte-swapped Value read
+*		from the address.
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_In16LE(Addr) Xil_In16((Addr))
+
+/*****************************************************************************/
+/**
+*
+* Perform a big-endian input operation for a 32-bit memory location
+* by reading from the specified address and returning the Value read from
+* that address.
+*
+* @param	Addr contains the address to perform the input operation at.
+*
+* @return	The Value read from the specified input address with the
+*		proper endianness. The return Value has the same endianness
+*		as that of the processor, i.e. if the processor is
+*		little-engian, the return Value is the byte-swapped Value read
+*		from the address.
+*
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_In32LE(Addr) Xil_In32((Addr))
+
+/*****************************************************************************/
+/**
+*
+* Perform a big-endian output operation for a 16-bit memory location
+* by writing the specified Value to the specified address.
+*
+* @param	Addr contains the address to perform the output operation at.
+* @param	Value contains the Value to be output at the specified address.
+*		The Value has the same endianness as that of the processor.
+*		If the processor is little-endian, the byte-swapped Value is
+*		written to the address.
+*
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_Out16LE(Addr, Value) Xil_Out16((Addr), (Value))
+
+/*****************************************************************************/
+/**
+*
+* Perform a big-endian output operation for a 32-bit memory location
+* by writing the specified Value to the specified address.
+*
+* @param	Addr contains the address to perform the output operation at.
+* @param	Value contains the Value to be output at the specified address.
+*		The Value has the same endianness as that of the processor.
+*		If the processor is little-endian, the byte-swapped Value is
+*		written to the address.
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_Out32LE(Addr, Value) Xil_Out32((Addr), (Value))
+
+/*****************************************************************************/
+/**
+*
+* Convert a 32-bit number from host byte order to network byte order.
+*
+* @param	Data the 32-bit number to be converted.
+*
+* @return	The converted 32-bit number in network byte order.
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_Htonl(Data) Xil_EndianSwap32((Data))
+
+/*****************************************************************************/
+/**
+*
+* Convert a 16-bit number from host byte order to network byte order.
+*
+* @param	Data the 16-bit number to be converted.
+*
+* @return	The converted 16-bit number in network byte order.
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_Htons(Data) Xil_EndianSwap16((Data))
+
+/*****************************************************************************/
+/**
+*
+* Convert a 32-bit number from network byte order to host byte order.
+*
+* @param	Data the 32-bit number to be converted.
+*
+* @return	The converted 32-bit number in host byte order.
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_Ntohl(Data) Xil_EndianSwap32((Data))
+
+/*****************************************************************************/
+/**
+*
+* Convert a 16-bit number from network byte order to host byte order.
+*
+* @param	Data the 16-bit number to be converted.
+*
+* @return	The converted 16-bit number in host byte order.
+*
+* @note		None.
+*
+******************************************************************************/
+#define Xil_Ntohs(Data) Xil_EndianSwap16((Data))
+
+/************************** Function Prototypes ******************************/
+
+/* The following functions allow the software to be transportable across
+ * processors which may use memory mapped I/O or I/O which is mapped into a
+ * seperate address space.
+ */
+u8 Xil_In8(INTPTR Addr);
+u16 Xil_In16(INTPTR Addr);
+u32 Xil_In32(INTPTR Addr);
+u64 Xil_In64(INTPTR Addr);
+
+void Xil_Out8(INTPTR Addr, u8 Value);
+void Xil_Out16(INTPTR Addr, u16 Value);
+void Xil_Out32(INTPTR Addr, u32 Value);
+void Xil_Out64(INTPTR Addr, u64 Value);
+
+u16 Xil_In16BE(INTPTR Addr);
+u32 Xil_In32BE(INTPTR Addr);
+void Xil_Out16BE(INTPTR Addr, u16 Value);
+void Xil_Out32BE(INTPTR Addr, u32 Value);
+
+u16 Xil_EndianSwap16(u16 Data);
+u32 Xil_EndianSwap32(u32 Data);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_macroback.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_macroback.h
new file mode 100644
index 000000000..ebafde87d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_macroback.h
@@ -0,0 +1,1052 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+
+/*********************************************************************/
+/**
+ * @file xil_macroback.h
+ *
+ * This header file is meant to bring back the removed _m macros.
+ * This header file must be included last.
+ * The following macros are not defined here due to the driver change:
+ *   XGpio_mSetDataDirection
+ *   XGpio_mGetDataReg
+ *   XGpio_mSetDataReg
+ *   XIIC_RESET
+ *   XIIC_CLEAR_STATS
+ *   XSpi_mReset
+ *   XSysAce_mSetCfgAddr
+ *   XSysAce_mIsCfgDone
+ *   XTft_mSetPixel
+ *   XTft_mGetPixel
+ *   XWdtTb_mEnableWdt
+ *   XWdtTb_mDisbleWdt
+ *   XWdtTb_mRestartWdt
+ *   XWdtTb_mGetTimebaseReg
+ *   XWdtTb_mHasReset
+ *
+ * Please refer the corresonding driver document for replacement.
+ *
+ *********************************************************************/
+
+#ifndef XIL_MACROBACK_H
+#define XIL_MACROBACK_H
+
+/*********************************************************************/
+/**
+ * Macros for Driver XCan
+ *
+ *********************************************************************/
+#ifndef XCan_mReadReg
+#define XCan_mReadReg XCan_ReadReg
+#endif
+
+#ifndef XCan_mWriteReg
+#define XCan_mWriteReg XCan_WriteReg
+#endif
+
+#ifndef XCan_mIsTxDone
+#define XCan_mIsTxDone XCan_IsTxDone
+#endif
+
+#ifndef XCan_mIsTxFifoFull
+#define XCan_mIsTxFifoFull XCan_IsTxFifoFull
+#endif
+
+#ifndef XCan_mIsHighPriorityBufFull
+#define XCan_mIsHighPriorityBufFull XCan_IsHighPriorityBufFull
+#endif
+
+#ifndef XCan_mIsRxEmpty
+#define XCan_mIsRxEmpty XCan_IsRxEmpty
+#endif
+
+#ifndef XCan_mIsAcceptFilterBusy
+#define XCan_mIsAcceptFilterBusy XCan_IsAcceptFilterBusy
+#endif
+
+#ifndef XCan_mCreateIdValue
+#define XCan_mCreateIdValue XCan_CreateIdValue
+#endif
+
+#ifndef XCan_mCreateDlcValue
+#define XCan_mCreateDlcValue XCan_CreateDlcValue
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XDmaCentral
+ *
+ *********************************************************************/
+#ifndef XDmaCentral_mWriteReg
+#define XDmaCentral_mWriteReg XDmaCentral_WriteReg
+#endif
+
+#ifndef XDmaCentral_mReadReg
+#define XDmaCentral_mReadReg XDmaCentral_ReadReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XDsAdc
+ *
+ *********************************************************************/
+#ifndef XDsAdc_mWriteReg
+#define XDsAdc_mWriteReg XDsAdc_WriteReg
+#endif
+
+#ifndef XDsAdc_mReadReg
+#define XDsAdc_mReadReg XDsAdc_ReadReg
+#endif
+
+#ifndef XDsAdc_mIsEmpty
+#define XDsAdc_mIsEmpty XDsAdc_IsEmpty
+#endif
+
+#ifndef XDsAdc_mSetFstmReg
+#define XDsAdc_mSetFstmReg XDsAdc_SetFstmReg
+#endif
+
+#ifndef XDsAdc_mGetFstmReg
+#define XDsAdc_mGetFstmReg XDsAdc_GetFstmReg
+#endif
+
+#ifndef XDsAdc_mEnableConversion
+#define XDsAdc_mEnableConversion XDsAdc_EnableConversion
+#endif
+
+#ifndef XDsAdc_mDisableConversion
+#define XDsAdc_mDisableConversion XDsAdc_DisableConversion
+#endif
+
+#ifndef XDsAdc_mGetFifoOccyReg
+#define XDsAdc_mGetFifoOccyReg XDsAdc_GetFifoOccyReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XDsDac
+ *
+ *********************************************************************/
+#ifndef XDsDac_mWriteReg
+#define XDsDac_mWriteReg XDsDac_WriteReg
+#endif
+
+#ifndef XDsDac_mReadReg
+#define XDsDac_mReadReg XDsDac_ReadReg
+#endif
+
+#ifndef XDsDac_mIsEmpty
+#define XDsDac_mIsEmpty XDsDac_IsEmpty
+#endif
+
+#ifndef XDsDac_mFifoIsFull
+#define XDsDac_mFifoIsFull XDsDac_FifoIsFull
+#endif
+
+#ifndef XDsDac_mGetVacancy
+#define XDsDac_mGetVacancy XDsDac_GetVacancy
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XEmacLite
+ *
+ *********************************************************************/
+#ifndef XEmacLite_mReadReg
+#define XEmacLite_mReadReg XEmacLite_ReadReg
+#endif
+
+#ifndef XEmacLite_mWriteReg
+#define XEmacLite_mWriteReg XEmacLite_WriteReg
+#endif
+
+#ifndef XEmacLite_mGetTxStatus
+#define XEmacLite_mGetTxStatus XEmacLite_GetTxStatus
+#endif
+
+#ifndef XEmacLite_mSetTxStatus
+#define XEmacLite_mSetTxStatus XEmacLite_SetTxStatus
+#endif
+
+#ifndef XEmacLite_mGetRxStatus
+#define XEmacLite_mGetRxStatus XEmacLite_GetRxStatus
+#endif
+
+#ifndef XEmacLite_mSetRxStatus
+#define XEmacLite_mSetRxStatus XEmacLite_SetRxStatus
+#endif
+
+#ifndef XEmacLite_mIsTxDone
+#define XEmacLite_mIsTxDone XEmacLite_IsTxDone
+#endif
+
+#ifndef XEmacLite_mIsRxEmpty
+#define XEmacLite_mIsRxEmpty XEmacLite_IsRxEmpty
+#endif
+
+#ifndef XEmacLite_mNextTransmitAddr
+#define XEmacLite_mNextTransmitAddr XEmacLite_NextTransmitAddr
+#endif
+
+#ifndef XEmacLite_mNextReceiveAddr
+#define XEmacLite_mNextReceiveAddr XEmacLite_NextReceiveAddr
+#endif
+
+#ifndef XEmacLite_mIsMdioConfigured
+#define XEmacLite_mIsMdioConfigured XEmacLite_IsMdioConfigured
+#endif
+
+#ifndef XEmacLite_mIsLoopbackConfigured
+#define XEmacLite_mIsLoopbackConfigured XEmacLite_IsLoopbackConfigured
+#endif
+
+#ifndef XEmacLite_mGetReceiveDataLength
+#define XEmacLite_mGetReceiveDataLength XEmacLite_GetReceiveDataLength
+#endif
+
+#ifndef XEmacLite_mGetTxActive
+#define XEmacLite_mGetTxActive XEmacLite_GetTxActive
+#endif
+
+#ifndef XEmacLite_mSetTxActive
+#define XEmacLite_mSetTxActive XEmacLite_SetTxActive
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XGpio
+ *
+ *********************************************************************/
+#ifndef XGpio_mWriteReg
+#define XGpio_mWriteReg XGpio_WriteReg
+#endif
+
+#ifndef XGpio_mReadReg
+#define XGpio_mReadReg XGpio_ReadReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XHwIcap
+ *
+ *********************************************************************/
+#ifndef XHwIcap_mFifoWrite
+#define XHwIcap_mFifoWrite XHwIcap_FifoWrite
+#endif
+
+#ifndef XHwIcap_mFifoRead
+#define XHwIcap_mFifoRead XHwIcap_FifoRead
+#endif
+
+#ifndef XHwIcap_mSetSizeReg
+#define XHwIcap_mSetSizeReg XHwIcap_SetSizeReg
+#endif
+
+#ifndef XHwIcap_mGetControlReg
+#define XHwIcap_mGetControlReg XHwIcap_GetControlReg
+#endif
+
+#ifndef XHwIcap_mStartConfig
+#define XHwIcap_mStartConfig XHwIcap_StartConfig
+#endif
+
+#ifndef XHwIcap_mStartReadBack
+#define XHwIcap_mStartReadBack XHwIcap_StartReadBack
+#endif
+
+#ifndef XHwIcap_mGetStatusReg
+#define XHwIcap_mGetStatusReg XHwIcap_GetStatusReg
+#endif
+
+#ifndef XHwIcap_mIsTransferDone
+#define XHwIcap_mIsTransferDone XHwIcap_IsTransferDone
+#endif
+
+#ifndef XHwIcap_mIsDeviceBusy
+#define XHwIcap_mIsDeviceBusy XHwIcap_IsDeviceBusy
+#endif
+
+#ifndef XHwIcap_mIntrGlobalEnable
+#define XHwIcap_mIntrGlobalEnable XHwIcap_IntrGlobalEnable
+#endif
+
+#ifndef XHwIcap_mIntrGlobalDisable
+#define XHwIcap_mIntrGlobalDisable XHwIcap_IntrGlobalDisable
+#endif
+
+#ifndef XHwIcap_mIntrGetStatus
+#define XHwIcap_mIntrGetStatus XHwIcap_IntrGetStatus
+#endif
+
+#ifndef XHwIcap_mIntrDisable
+#define XHwIcap_mIntrDisable XHwIcap_IntrDisable
+#endif
+
+#ifndef XHwIcap_mIntrEnable
+#define XHwIcap_mIntrEnable XHwIcap_IntrEnable
+#endif
+
+#ifndef XHwIcap_mIntrGetEnabled
+#define XHwIcap_mIntrGetEnabled XHwIcap_IntrGetEnabled
+#endif
+
+#ifndef XHwIcap_mIntrClear
+#define XHwIcap_mIntrClear XHwIcap_IntrClear
+#endif
+
+#ifndef XHwIcap_mGetWrFifoVacancy
+#define XHwIcap_mGetWrFifoVacancy XHwIcap_GetWrFifoVacancy
+#endif
+
+#ifndef XHwIcap_mGetRdFifoOccupancy
+#define XHwIcap_mGetRdFifoOccupancy XHwIcap_GetRdFifoOccupancy
+#endif
+
+#ifndef XHwIcap_mSliceX2Col
+#define XHwIcap_mSliceX2Col XHwIcap_SliceX2Col
+#endif
+
+#ifndef XHwIcap_mSliceY2Row
+#define XHwIcap_mSliceY2Row XHwIcap_SliceY2Row
+#endif
+
+#ifndef XHwIcap_mSliceXY2Slice
+#define XHwIcap_mSliceXY2Slice XHwIcap_SliceXY2Slice
+#endif
+
+#ifndef XHwIcap_mReadReg
+#define XHwIcap_mReadReg XHwIcap_ReadReg
+#endif
+
+#ifndef XHwIcap_mWriteReg
+#define XHwIcap_mWriteReg XHwIcap_WriteReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XIic
+ *
+ *********************************************************************/
+#ifndef XIic_mReadReg
+#define XIic_mReadReg XIic_ReadReg
+#endif
+
+#ifndef XIic_mWriteReg
+#define XIic_mWriteReg XIic_WriteReg
+#endif
+
+#ifndef XIic_mEnterCriticalRegion
+#define XIic_mEnterCriticalRegion XIic_IntrGlobalDisable
+#endif
+
+#ifndef XIic_mExitCriticalRegion
+#define XIic_mExitCriticalRegion XIic_IntrGlobalEnable
+#endif
+
+#ifndef XIIC_GINTR_DISABLE
+#define XIIC_GINTR_DISABLE XIic_IntrGlobalDisable
+#endif
+
+#ifndef XIIC_GINTR_ENABLE
+#define XIIC_GINTR_ENABLE XIic_IntrGlobalEnable
+#endif
+
+#ifndef XIIC_IS_GINTR_ENABLED
+#define XIIC_IS_GINTR_ENABLED XIic_IsIntrGlobalEnabled
+#endif
+
+#ifndef XIIC_WRITE_IISR
+#define XIIC_WRITE_IISR XIic_WriteIisr
+#endif
+
+#ifndef XIIC_READ_IISR
+#define XIIC_READ_IISR XIic_ReadIisr
+#endif
+
+#ifndef XIIC_WRITE_IIER
+#define XIIC_WRITE_IIER XIic_WriteIier
+#endif
+
+#ifndef XIic_mClearIisr
+#define XIic_mClearIisr XIic_ClearIisr
+#endif
+
+#ifndef XIic_mSend7BitAddress
+#define XIic_mSend7BitAddress XIic_Send7BitAddress
+#endif
+
+#ifndef XIic_mDynSend7BitAddress
+#define XIic_mDynSend7BitAddress XIic_DynSend7BitAddress
+#endif
+
+#ifndef XIic_mDynSendStartStopAddress
+#define XIic_mDynSendStartStopAddress XIic_DynSendStartStopAddress
+#endif
+
+#ifndef XIic_mDynSendStop
+#define XIic_mDynSendStop XIic_DynSendStop
+#endif
+
+#ifndef XIic_mSend10BitAddrByte1
+#define XIic_mSend10BitAddrByte1 XIic_Send10BitAddrByte1
+#endif
+
+#ifndef XIic_mSend10BitAddrByte2
+#define XIic_mSend10BitAddrByte2 XIic_Send10BitAddrByte2
+#endif
+
+#ifndef XIic_mSend7BitAddr
+#define XIic_mSend7BitAddr XIic_Send7BitAddr
+#endif
+
+#ifndef XIic_mDisableIntr
+#define XIic_mDisableIntr XIic_DisableIntr
+#endif
+
+#ifndef XIic_mEnableIntr
+#define XIic_mEnableIntr XIic_EnableIntr
+#endif
+
+#ifndef XIic_mClearIntr
+#define XIic_mClearIntr XIic_ClearIntr
+#endif
+
+#ifndef XIic_mClearEnableIntr
+#define XIic_mClearEnableIntr XIic_ClearEnableIntr
+#endif
+
+#ifndef XIic_mFlushRxFifo
+#define XIic_mFlushRxFifo XIic_FlushRxFifo
+#endif
+
+#ifndef XIic_mFlushTxFifo
+#define XIic_mFlushTxFifo XIic_FlushTxFifo
+#endif
+
+#ifndef XIic_mReadRecvByte
+#define XIic_mReadRecvByte XIic_ReadRecvByte
+#endif
+
+#ifndef XIic_mWriteSendByte
+#define XIic_mWriteSendByte XIic_WriteSendByte
+#endif
+
+#ifndef XIic_mSetControlRegister
+#define XIic_mSetControlRegister XIic_SetControlRegister
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XIntc
+ *
+ *********************************************************************/
+#ifndef XIntc_mMasterEnable
+#define XIntc_mMasterEnable XIntc_MasterEnable
+#endif
+
+#ifndef XIntc_mMasterDisable
+#define XIntc_mMasterDisable XIntc_MasterDisable
+#endif
+
+#ifndef XIntc_mEnableIntr
+#define XIntc_mEnableIntr XIntc_EnableIntr
+#endif
+
+#ifndef XIntc_mDisableIntr
+#define XIntc_mDisableIntr XIntc_DisableIntr
+#endif
+
+#ifndef XIntc_mAckIntr
+#define XIntc_mAckIntr XIntc_AckIntr
+#endif
+
+#ifndef XIntc_mGetIntrStatus
+#define XIntc_mGetIntrStatus XIntc_GetIntrStatus
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XLlDma
+ *
+ *********************************************************************/
+#ifndef XLlDma_mBdRead
+#define XLlDma_mBdRead XLlDma_BdRead
+#endif
+
+#ifndef XLlDma_mBdWrite
+#define XLlDma_mBdWrite XLlDma_BdWrite
+#endif
+
+#ifndef XLlDma_mWriteReg
+#define XLlDma_mWriteReg XLlDma_WriteReg
+#endif
+
+#ifndef XLlDma_mReadReg
+#define XLlDma_mReadReg XLlDma_ReadReg
+#endif
+
+#ifndef XLlDma_mBdClear
+#define XLlDma_mBdClear XLlDma_BdClear
+#endif
+
+#ifndef XLlDma_mBdSetStsCtrl
+#define XLlDma_mBdSetStsCtrl XLlDma_BdSetStsCtrl
+#endif
+
+#ifndef XLlDma_mBdGetStsCtrl
+#define XLlDma_mBdGetStsCtrl XLlDma_BdGetStsCtrl
+#endif
+
+#ifndef XLlDma_mBdSetLength
+#define XLlDma_mBdSetLength XLlDma_BdSetLength
+#endif
+
+#ifndef XLlDma_mBdGetLength
+#define XLlDma_mBdGetLength XLlDma_BdGetLength
+#endif
+
+#ifndef XLlDma_mBdSetId
+#define XLlDma_mBdSetId XLlDma_BdSetId
+#endif
+
+#ifndef XLlDma_mBdGetId
+#define XLlDma_mBdGetId XLlDma_BdGetId
+#endif
+
+#ifndef XLlDma_mBdSetBufAddr
+#define XLlDma_mBdSetBufAddr XLlDma_BdSetBufAddr
+#endif
+
+#ifndef XLlDma_mBdGetBufAddr
+#define XLlDma_mBdGetBufAddr XLlDma_BdGetBufAddr
+#endif
+
+#ifndef XLlDma_mBdGetLength
+#define XLlDma_mBdGetLength XLlDma_BdGetLength
+#endif
+
+#ifndef XLlDma_mGetTxRing
+#define XLlDma_mGetTxRing XLlDma_GetTxRing
+#endif
+
+#ifndef XLlDma_mGetRxRing
+#define XLlDma_mGetRxRing XLlDma_GetRxRing
+#endif
+
+#ifndef XLlDma_mGetCr
+#define XLlDma_mGetCr XLlDma_GetCr
+#endif
+
+#ifndef XLlDma_mSetCr
+#define XLlDma_mSetCr XLlDma_SetCr
+#endif
+
+#ifndef XLlDma_mBdRingCntCalc
+#define XLlDma_mBdRingCntCalc XLlDma_BdRingCntCalc
+#endif
+
+#ifndef XLlDma_mBdRingMemCalc
+#define XLlDma_mBdRingMemCalc XLlDma_BdRingMemCalc
+#endif
+
+#ifndef XLlDma_mBdRingGetCnt
+#define XLlDma_mBdRingGetCnt XLlDma_BdRingGetCnt
+#endif
+
+#ifndef XLlDma_mBdRingGetFreeCnt
+#define XLlDma_mBdRingGetFreeCnt XLlDma_BdRingGetFreeCnt
+#endif
+
+#ifndef XLlDma_mBdRingSnapShotCurrBd
+#define XLlDma_mBdRingSnapShotCurrBd XLlDma_BdRingSnapShotCurrBd
+#endif
+
+#ifndef XLlDma_mBdRingNext
+#define XLlDma_mBdRingNext XLlDma_BdRingNext
+#endif
+
+#ifndef XLlDma_mBdRingPrev
+#define XLlDma_mBdRingPrev XLlDma_BdRingPrev
+#endif
+
+#ifndef XLlDma_mBdRingGetSr
+#define XLlDma_mBdRingGetSr XLlDma_BdRingGetSr
+#endif
+
+#ifndef XLlDma_mBdRingSetSr
+#define XLlDma_mBdRingSetSr XLlDma_BdRingSetSr
+#endif
+
+#ifndef XLlDma_mBdRingGetCr
+#define XLlDma_mBdRingGetCr XLlDma_BdRingGetCr
+#endif
+
+#ifndef XLlDma_mBdRingSetCr
+#define XLlDma_mBdRingSetCr XLlDma_BdRingSetCr
+#endif
+
+#ifndef XLlDma_mBdRingBusy
+#define XLlDma_mBdRingBusy XLlDma_BdRingBusy
+#endif
+
+#ifndef XLlDma_mBdRingIntEnable
+#define XLlDma_mBdRingIntEnable XLlDma_BdRingIntEnable
+#endif
+
+#ifndef XLlDma_mBdRingIntDisable
+#define XLlDma_mBdRingIntDisable XLlDma_BdRingIntDisable
+#endif
+
+#ifndef XLlDma_mBdRingIntGetEnabled
+#define XLlDma_mBdRingIntGetEnabled XLlDma_BdRingIntGetEnabled
+#endif
+
+#ifndef XLlDma_mBdRingGetIrq
+#define XLlDma_mBdRingGetIrq XLlDma_BdRingGetIrq
+#endif
+
+#ifndef XLlDma_mBdRingAckIrq
+#define XLlDma_mBdRingAckIrq XLlDma_BdRingAckIrq
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XMbox
+ *
+ *********************************************************************/
+#ifndef XMbox_mWriteReg
+#define XMbox_mWriteReg XMbox_WriteReg
+#endif
+
+#ifndef XMbox_mReadReg
+#define XMbox_mReadReg XMbox_ReadReg
+#endif
+
+#ifndef XMbox_mWriteMBox
+#define XMbox_mWriteMBox XMbox_WriteMBox
+#endif
+
+#ifndef XMbox_mReadMBox
+#define XMbox_mReadMBox XMbox_ReadMBox
+#endif
+
+#ifndef XMbox_mFSLReadMBox
+#define XMbox_mFSLReadMBox XMbox_FSLReadMBox
+#endif
+
+#ifndef XMbox_mFSLWriteMBox
+#define XMbox_mFSLWriteMBox XMbox_FSLWriteMBox
+#endif
+
+#ifndef XMbox_mFSLIsEmpty
+#define XMbox_mFSLIsEmpty XMbox_FSLIsEmpty
+#endif
+
+#ifndef XMbox_mFSLIsFull
+#define XMbox_mFSLIsFull XMbox_FSLIsFull
+#endif
+
+#ifndef XMbox_mIsEmpty
+#define XMbox_mIsEmpty XMbox_IsEmptyHw
+#endif
+
+#ifndef XMbox_mIsFull
+#define XMbox_mIsFull XMbox_IsFullHw
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XMpmc
+ *
+ *********************************************************************/
+#ifndef XMpmc_mReadReg
+#define XMpmc_mReadReg XMpmc_ReadReg
+#endif
+
+#ifndef XMpmc_mWriteReg
+#define XMpmc_mWriteReg XMpmc_WriteReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XMutex
+ *
+ *********************************************************************/
+#ifndef XMutex_mWriteReg
+#define XMutex_mWriteReg XMutex_WriteReg
+#endif
+
+#ifndef XMutex_mReadReg
+#define XMutex_mReadReg XMutex_ReadReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XPcie
+ *
+ *********************************************************************/
+#ifndef XPcie_mReadReg
+#define XPcie_mReadReg XPcie_ReadReg
+#endif
+
+#ifndef XPcie_mWriteReg
+#define XPcie_mWriteReg XPcie_WriteReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XSpi
+ *
+ *********************************************************************/
+#ifndef XSpi_mIntrGlobalEnable
+#define XSpi_mIntrGlobalEnable XSpi_IntrGlobalEnable
+#endif
+
+#ifndef XSpi_mIntrGlobalDisable
+#define XSpi_mIntrGlobalDisable XSpi_IntrGlobalDisable
+#endif
+
+#ifndef XSpi_mIsIntrGlobalEnabled
+#define XSpi_mIsIntrGlobalEnabled XSpi_IsIntrGlobalEnabled
+#endif
+
+#ifndef XSpi_mIntrGetStatus
+#define XSpi_mIntrGetStatus XSpi_IntrGetStatus
+#endif
+
+#ifndef XSpi_mIntrClear
+#define XSpi_mIntrClear XSpi_IntrClear
+#endif
+
+#ifndef XSpi_mIntrEnable
+#define XSpi_mIntrEnable XSpi_IntrEnable
+#endif
+
+#ifndef XSpi_mIntrDisable
+#define XSpi_mIntrDisable XSpi_IntrDisable
+#endif
+
+#ifndef XSpi_mIntrGetEnabled
+#define XSpi_mIntrGetEnabled XSpi_IntrGetEnabled
+#endif
+
+#ifndef XSpi_mSetControlReg
+#define XSpi_mSetControlReg XSpi_SetControlReg
+#endif
+
+#ifndef XSpi_mGetControlReg
+#define XSpi_mGetControlReg XSpi_GetControlReg
+#endif
+
+#ifndef XSpi_mGetStatusReg
+#define XSpi_mGetStatusReg XSpi_GetStatusReg
+#endif
+
+#ifndef XSpi_mSetSlaveSelectReg
+#define XSpi_mSetSlaveSelectReg XSpi_SetSlaveSelectReg
+#endif
+
+#ifndef XSpi_mGetSlaveSelectReg
+#define XSpi_mGetSlaveSelectReg XSpi_GetSlaveSelectReg
+#endif
+
+#ifndef XSpi_mEnable
+#define XSpi_mEnable XSpi_Enable
+#endif
+
+#ifndef XSpi_mDisable
+#define XSpi_mDisable XSpi_Disable
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XSysAce
+ *
+ *********************************************************************/
+#ifndef XSysAce_mGetControlReg
+#define XSysAce_mGetControlReg XSysAce_GetControlReg
+#endif
+
+#ifndef XSysAce_mSetControlReg
+#define XSysAce_mSetControlReg XSysAce_SetControlReg
+#endif
+
+#ifndef XSysAce_mOrControlReg
+#define XSysAce_mOrControlReg XSysAce_OrControlReg
+#endif
+
+#ifndef XSysAce_mAndControlReg
+#define XSysAce_mAndControlReg XSysAce_AndControlReg
+#endif
+
+#ifndef XSysAce_mGetErrorReg
+#define XSysAce_mGetErrorReg XSysAce_GetErrorReg
+#endif
+
+#ifndef XSysAce_mGetStatusReg
+#define XSysAce_mGetStatusReg XSysAce_GetStatusReg
+#endif
+
+#ifndef XSysAce_mWaitForLock
+#define XSysAce_mWaitForLock XSysAce_WaitForLock
+#endif
+
+#ifndef XSysAce_mEnableIntr
+#define XSysAce_mEnableIntr XSysAce_EnableIntr
+#endif
+
+#ifndef XSysAce_mDisableIntr
+#define XSysAce_mDisableIntr XSysAce_DisableIntr
+#endif
+
+#ifndef XSysAce_mIsReadyForCmd
+#define XSysAce_mIsReadyForCmd XSysAce_IsReadyForCmd
+#endif
+
+#ifndef XSysAce_mIsMpuLocked
+#define XSysAce_mIsMpuLocked XSysAce_IsMpuLocked
+#endif
+
+#ifndef XSysAce_mIsIntrEnabled
+#define XSysAce_mIsIntrEnabled XSysAce_IsIntrEnabled
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XSysMon
+ *
+ *********************************************************************/
+#ifndef XSysMon_mIsEventSamplingModeSet
+#define XSysMon_mIsEventSamplingModeSet XSysMon_IsEventSamplingModeSet
+#endif
+
+#ifndef XSysMon_mIsDrpBusy
+#define XSysMon_mIsDrpBusy XSysMon_IsDrpBusy
+#endif
+
+#ifndef XSysMon_mIsDrpLocked
+#define XSysMon_mIsDrpLocked XSysMon_IsDrpLocked
+#endif
+
+#ifndef XSysMon_mRawToTemperature
+#define XSysMon_mRawToTemperature XSysMon_RawToTemperature
+#endif
+
+#ifndef XSysMon_mRawToVoltage
+#define XSysMon_mRawToVoltage XSysMon_RawToVoltage
+#endif
+
+#ifndef XSysMon_mTemperatureToRaw
+#define XSysMon_mTemperatureToRaw XSysMon_TemperatureToRaw
+#endif
+
+#ifndef XSysMon_mVoltageToRaw
+#define XSysMon_mVoltageToRaw XSysMon_VoltageToRaw
+#endif
+
+#ifndef XSysMon_mReadReg
+#define XSysMon_mReadReg XSysMon_ReadReg
+#endif
+
+#ifndef XSysMon_mWriteReg
+#define XSysMon_mWriteReg XSysMon_WriteReg
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XTmrCtr
+ *
+ *********************************************************************/
+#ifndef XTimerCtr_mReadReg
+#define XTimerCtr_mReadReg XTimerCtr_ReadReg
+#endif
+
+#ifndef XTmrCtr_mWriteReg
+#define XTmrCtr_mWriteReg XTmrCtr_WriteReg
+#endif
+
+#ifndef XTmrCtr_mSetControlStatusReg
+#define XTmrCtr_mSetControlStatusReg XTmrCtr_SetControlStatusReg
+#endif
+
+#ifndef XTmrCtr_mGetControlStatusReg
+#define XTmrCtr_mGetControlStatusReg XTmrCtr_GetControlStatusReg
+#endif
+
+#ifndef XTmrCtr_mGetTimerCounterReg
+#define XTmrCtr_mGetTimerCounterReg XTmrCtr_GetTimerCounterReg
+#endif
+
+#ifndef XTmrCtr_mSetLoadReg
+#define XTmrCtr_mSetLoadReg XTmrCtr_SetLoadReg
+#endif
+
+#ifndef XTmrCtr_mGetLoadReg
+#define XTmrCtr_mGetLoadReg XTmrCtr_GetLoadReg
+#endif
+
+#ifndef XTmrCtr_mEnable
+#define XTmrCtr_mEnable XTmrCtr_Enable
+#endif
+
+#ifndef XTmrCtr_mDisable
+#define XTmrCtr_mDisable XTmrCtr_Disable
+#endif
+
+#ifndef XTmrCtr_mEnableIntr
+#define XTmrCtr_mEnableIntr XTmrCtr_EnableIntr
+#endif
+
+#ifndef XTmrCtr_mDisableIntr
+#define XTmrCtr_mDisableIntr XTmrCtr_DisableIntr
+#endif
+
+#ifndef XTmrCtr_mLoadTimerCounterReg
+#define XTmrCtr_mLoadTimerCounterReg XTmrCtr_LoadTimerCounterReg
+#endif
+
+#ifndef XTmrCtr_mHasEventOccurred
+#define XTmrCtr_mHasEventOccurred XTmrCtr_HasEventOccurred
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XUartLite
+ *
+ *********************************************************************/
+#ifndef XUartLite_mUpdateStats
+#define XUartLite_mUpdateStats XUartLite_UpdateStats
+#endif
+
+#ifndef XUartLite_mWriteReg
+#define XUartLite_mWriteReg XUartLite_WriteReg
+#endif
+
+#ifndef XUartLite_mReadReg
+#define XUartLite_mReadReg XUartLite_ReadReg
+#endif
+
+#ifndef XUartLite_mClearStats
+#define XUartLite_mClearStats XUartLite_ClearStats
+#endif
+
+#ifndef XUartLite_mSetControlReg
+#define XUartLite_mSetControlReg XUartLite_SetControlReg
+#endif
+
+#ifndef XUartLite_mGetStatusReg
+#define XUartLite_mGetStatusReg XUartLite_GetStatusReg
+#endif
+
+#ifndef XUartLite_mIsReceiveEmpty
+#define XUartLite_mIsReceiveEmpty XUartLite_IsReceiveEmpty
+#endif
+
+#ifndef XUartLite_mIsTransmitFull
+#define XUartLite_mIsTransmitFull XUartLite_IsTransmitFull
+#endif
+
+#ifndef XUartLite_mIsIntrEnabled
+#define XUartLite_mIsIntrEnabled XUartLite_IsIntrEnabled
+#endif
+
+#ifndef XUartLite_mEnableIntr
+#define XUartLite_mEnableIntr XUartLite_EnableIntr
+#endif
+
+#ifndef XUartLite_mDisableIntr
+#define XUartLite_mDisableIntr XUartLite_DisableIntr
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XUartNs550
+ *
+ *********************************************************************/
+#ifndef XUartNs550_mUpdateStats
+#define XUartNs550_mUpdateStats XUartNs550_UpdateStats
+#endif
+
+#ifndef XUartNs550_mReadReg
+#define XUartNs550_mReadReg XUartNs550_ReadReg
+#endif
+
+#ifndef XUartNs550_mWriteReg
+#define XUartNs550_mWriteReg XUartNs550_WriteReg
+#endif
+
+#ifndef XUartNs550_mClearStats
+#define XUartNs550_mClearStats XUartNs550_ClearStats
+#endif
+
+#ifndef XUartNs550_mGetLineStatusReg
+#define XUartNs550_mGetLineStatusReg XUartNs550_GetLineStatusReg
+#endif
+
+#ifndef XUartNs550_mGetLineControlReg
+#define XUartNs550_mGetLineControlReg XUartNs550_GetLineControlReg
+#endif
+
+#ifndef XUartNs550_mSetLineControlReg
+#define XUartNs550_mSetLineControlReg XUartNs550_SetLineControlReg
+#endif
+
+#ifndef XUartNs550_mEnableIntr
+#define XUartNs550_mEnableIntr XUartNs550_EnableIntr
+#endif
+
+#ifndef XUartNs550_mDisableIntr
+#define XUartNs550_mDisableIntr XUartNs550_DisableIntr
+#endif
+
+#ifndef XUartNs550_mIsReceiveData
+#define XUartNs550_mIsReceiveData XUartNs550_IsReceiveData
+#endif
+
+#ifndef XUartNs550_mIsTransmitEmpty
+#define XUartNs550_mIsTransmitEmpty XUartNs550_IsTransmitEmpty
+#endif
+
+/*********************************************************************/
+/**
+ * Macros for Driver XUsb
+ *
+ *********************************************************************/
+#ifndef XUsb_mReadReg
+#define XUsb_mReadReg XUsb_ReadReg
+#endif
+
+#ifndef XUsb_mWriteReg
+#define XUsb_mWriteReg XUsb_WriteReg
+#endif
+
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mmu.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mmu.h
new file mode 100644
index 000000000..8e43e8227
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mmu.h
@@ -0,0 +1,80 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xil_mmu.h
+* This file only includes xil_mpu.h which contains Xil_SetTlbAttributes API
+* defined for MPU in R5. R5 does not have mmu and for usage of similiar API
+* the file has been created.
+*
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.0	pkp  2/12/15 Initial version
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+#ifndef XIL_MMU_H
+#define XIL_MMU_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/***************************** Include Files *********************************/
+
+#include "xil_mpu.h"
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/**************************** Type Definitions *******************************/
+
+/************************** Constant Definitions *****************************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XIL_MMU_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mpu.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mpu.c
new file mode 100644
index 000000000..7c028c515
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mpu.c
@@ -0,0 +1,258 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xil_mpu.c
+*
+* This file provides APIs for enabling/disabling MPU and setting the memory
+* attributes for sections, in the MPU translation table.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_cache.h"
+#include "xpseudo_asm.h"
+#include "xil_types.h"
+#include "xil_mpu.h"
+#include "xdebug.h"
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/**************************** Type Definitions *******************************/
+
+/************************** Constant Definitions *****************************/
+
+/************************** Variable Definitions *****************************/
+
+static const struct {
+	u64 size;
+	unsigned int encoding;
+}region_size[] = {
+	{ 0x20, REGION_32B },
+	{ 0x40, REGION_64B },
+	{ 0x80, REGION_128B },
+	{ 0x100, REGION_256B },
+	{ 0x200, REGION_512B },
+	{ 0x400, REGION_1K },
+	{ 0x800, REGION_2K },
+	{ 0x1000, REGION_4K },
+	{ 0x2000, REGION_8K },
+	{ 0x4000, REGION_16K },
+	{ 0x8000, REGION_32K },
+	{ 0x10000, REGION_64K },
+	{ 0x20000, REGION_128K },
+	{ 0x40000, REGION_256K },
+	{ 0x80000, REGION_512K },
+	{ 0x100000, REGION_1M },
+	{ 0x200000, REGION_2M },
+	{ 0x400000, REGION_4M },
+	{ 0x800000, REGION_8M },
+	{ 0x1000000, REGION_16M },
+	{ 0x2000000, REGION_32M },
+	{ 0x4000000, REGION_64M },
+	{ 0x8000000, REGION_128M },
+	{ 0x10000000, REGION_256M },
+	{ 0x20000000, REGION_512M },
+	{ 0x40000000, REGION_1G },
+	{ 0x80000000, REGION_2G },
+	{ 0x100000000, REGION_4G },
+};
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************
+*
+* Set the memory attributes for a section of memory with starting address addr
+* of the region size 1MB having attributes attrib
+*
+* @param	addr is the address for which attributes are to be set.
+* @param	attrib specifies the attributes for that memory region.
+* @return	None.
+*
+*
+******************************************************************************/
+void Xil_SetTlbAttributes(INTPTR addr, u32 attrib)
+{
+	INTPTR Localaddr = addr;
+	Localaddr &= (~(0xFFFFFU));
+	/* Setting the MPU region with given attribute with 1MB size */
+	Xil_SetMPURegion(Localaddr, 0x100000, attrib);
+}
+
+/*****************************************************************************
+*
+* Set the memory attributes for a section of memory with starting address addr
+* of the region size size and having attributes attrib
+*
+* @param	addr is the address for which attributes are to be set.
+* @param	size is the size of the region.
+* @param	attrib specifies the attributes for that memory region.
+* @return	None.
+*
+*
+******************************************************************************/
+void Xil_SetMPURegion(INTPTR addr, u64 size, u32 attrib)
+{
+	u32 Regionsize = 0;
+	INTPTR Localaddr = addr;
+	u32 NextAvailableMemRegion;
+	unsigned int i;
+
+	Xil_DCacheFlush();
+	Xil_ICacheInvalidate();
+	NextAvailableMemRegion = mfcp(XREG_CP15_MPU_MEMORY_REG_NUMBER);
+	NextAvailableMemRegion++;
+	if (NextAvailableMemRegion > 16) {
+		xdbg_printf(DEBUG, "No regions available\r\n");
+		return;
+	}
+	mtcp(XREG_CP15_MPU_MEMORY_REG_NUMBER,NextAvailableMemRegion);
+	isb();
+
+	/* Lookup the size.  */
+	for (i = 0; i < sizeof region_size / sizeof region_size[0]; i++) {
+		if (size <= region_size[i].size) {
+			Regionsize = region_size[i].encoding;
+			break;
+		}
+	}
+
+	Localaddr &= ~(region_size[i].size - 1);
+
+	Regionsize <<= 1;
+	Regionsize |= REGION_EN;
+	dsb();
+	mtcp(XREG_CP15_MPU_REG_BASEADDR, Localaddr);	/* Set base address of a region */
+	mtcp(XREG_CP15_MPU_REG_ACCESS_CTRL, attrib);	/* Set the control attribute */
+	mtcp(XREG_CP15_MPU_REG_SIZE_EN, Regionsize);	/* set the region size and enable it*/
+	dsb();
+	isb();
+}
+/*****************************************************************************
+*
+* Enable MPU for Cortex R5 processor. This function invalidates I cache and
+* flush the D Caches before enabling the MPU.
+*
+*
+* @param	None.
+* @return	None.
+*
+******************************************************************************/
+void Xil_EnableMPU(void)
+{
+	u32 CtrlReg, Reg;
+	s32 DCacheStatus=0, ICacheStatus=0;
+	/* enable caches only if they are disabled */
+	CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+	if ((CtrlReg & XREG_CP15_CONTROL_C_BIT) != 0x00000000U) {
+		DCacheStatus=1;
+	}
+	if ((CtrlReg & XREG_CP15_CONTROL_I_BIT) != 0x00000000U) {
+		ICacheStatus=1;
+	}
+
+	if(DCacheStatus != 0) {
+		Xil_DCacheDisable();
+	}
+	if(ICacheStatus != 0){
+		Xil_ICacheDisable();
+	}
+	Reg = mfcp(XREG_CP15_SYS_CONTROL);
+	Reg |= 0x00000001U;
+	dsb();
+	mtcp(XREG_CP15_SYS_CONTROL, Reg);
+	isb();
+	/* enable caches only if they are disabled in routine*/
+	if(DCacheStatus != 0) {
+		Xil_DCacheEnable();
+	}
+	if(ICacheStatus != 0) {
+		Xil_ICacheEnable();
+	}
+}
+
+/*****************************************************************************
+*
+* Disable MPU for Cortex R5 processors. This function invalidates I cache and
+* flush the D Caches before disabling the MPU.
+*
+* @param	None.
+*
+* @return	None.
+*
+******************************************************************************/
+void Xil_DisableMPU(void)
+{
+	u32 CtrlReg, Reg;
+	s32 DCacheStatus=0, ICacheStatus=0;
+	/* enable caches only if they are disabled */
+	CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+	if ((CtrlReg & XREG_CP15_CONTROL_C_BIT) != 0x00000000U) {
+		DCacheStatus=1;
+	}
+	if ((CtrlReg & XREG_CP15_CONTROL_I_BIT) != 0x00000000U) {
+		ICacheStatus=1;
+	}
+
+	if(DCacheStatus != 0) {
+		Xil_DCacheDisable();
+	}
+	if(ICacheStatus != 0){
+		Xil_ICacheDisable();
+	}
+
+	mtcp(XREG_CP15_INVAL_BRANCH_ARRAY, 0);
+	Reg = mfcp(XREG_CP15_SYS_CONTROL);
+	Reg &= ~(0x00000001U);
+	dsb();
+	mtcp(XREG_CP15_SYS_CONTROL, Reg);
+	isb();
+	/* enable caches only if they are disabled in routine*/
+	if(DCacheStatus != 0) {
+		Xil_DCacheEnable();
+	}
+	if(ICacheStatus != 0) {
+		Xil_ICacheEnable();
+	}
+}
\ No newline at end of file
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mpu.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mpu.h
new file mode 100644
index 000000000..a55be916e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_mpu.h
@@ -0,0 +1,80 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xil_mmu.h
+*
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+#ifndef XIL_MPU_H
+#define XIL_MPU_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+#include "xil_types.h"
+/***************************** Include Files *********************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/**************************** Type Definitions *******************************/
+
+/************************** Constant Definitions *****************************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+void Xil_SetTlbAttributes(INTPTR Addr, u32 attrib);
+void Xil_EnableMPU(void);
+void Xil_DisableMPU(void);
+void Xil_SetMPURegion(INTPTR addr, u64 size, u32 attrib);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XIL_MPU_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_printf.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_printf.c
new file mode 100644
index 000000000..0f0db4fc9
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_printf.c
@@ -0,0 +1,360 @@
+/*---------------------------------------------------*/
+/* Modified from :                                   */
+/* Public Domain version of printf                   */
+/* Rud Merriam, Compsult, Inc. Houston, Tx.          */
+/* For Embedded Systems Programming, 1991            */
+/*                                                   */
+/*---------------------------------------------------*/
+#include "xil_printf.h"
+#include "xil_types.h"
+#include "xil_assert.h"
+#include 
+#include 
+#include 
+
+static void padding( const s32 l_flag,const struct params_s *par);
+static void outs(const charptr lp, struct params_s *par);
+static s32 getnum( charptr* linep);
+
+typedef struct params_s {
+    s32 len;
+    s32 num1;
+    s32 num2;
+    char8 pad_character;
+    s32 do_padding;
+    s32 left_flag;
+    s32 unsigned_flag;
+} params_t;
+
+
+/*---------------------------------------------------*/
+/* The purpose of this routine is to output data the */
+/* same as the standard printf function without the  */
+/* overhead most run-time libraries involve. Usually */
+/* the printf brings in many kilobytes of code and   */
+/* that is unacceptable in most embedded systems.    */
+/*---------------------------------------------------*/
+
+
+/*---------------------------------------------------*/
+/*                                                   */
+/* This routine puts pad characters into the output  */
+/* buffer.                                           */
+/*                                                   */
+static void padding( const s32 l_flag, const struct params_s *par)
+{
+    s32 i;
+
+    if ((par->do_padding != 0) && (l_flag != 0) && (par->len < par->num1)) {
+		i=(par->len);
+        for (; i<(par->num1); i++) {
+#ifdef STDOUT_BASEADDRESS
+            outbyte( par->pad_character);
+#endif
+		}
+    }
+}
+
+/*---------------------------------------------------*/
+/*                                                   */
+/* This routine moves a string to the output buffer  */
+/* as directed by the padding and positioning flags. */
+/*                                                   */
+static void outs(const charptr lp, struct params_s *par)
+{
+    charptr LocalPtr;
+	LocalPtr = lp;
+    /* pad on left if needed                         */
+	if(LocalPtr != NULL) {
+		par->len = (s32)strlen( LocalPtr);
+	}
+    padding( !(par->left_flag), par);
+
+    /* Move string to the buffer                     */
+    while (((*LocalPtr) != (char8)0) && ((par->num2) != 0)) {
+		(par->num2)--;
+#ifdef STDOUT_BASEADDRESS
+        outbyte(*LocalPtr);
+		LocalPtr += 1;
+#endif
+}
+
+    /* Pad on right if needed                        */
+    /* CR 439175 - elided next stmt. Seemed bogus.   */
+    /* par->len = strlen( lp)                      */
+    padding( par->left_flag, par);
+}
+
+/*---------------------------------------------------*/
+/*                                                   */
+/* This routine moves a number to the output buffer  */
+/* as directed by the padding and positioning flags. */
+/*                                                   */
+
+static void outnum( const s32 n, const s32 base, struct params_s *par)
+{
+    charptr cp;
+    s32 negative;
+	s32 i;
+    char8 outbuf[32];
+    const char8 digits[] = "0123456789ABCDEF";
+    u32 num;
+    for(i = 0; i<32; i++) {
+	outbuf[i] = '0';
+    }
+
+    /* Check if number is negative                   */
+    if ((par->unsigned_flag == 0) && (base == 10) && (n < 0L)) {
+        negative = 1;
+		num =(-(n));
+    }
+    else{
+        num = n;
+        negative = 0;
+    }
+
+    /* Build number (backwards) in outbuf            */
+    i = 0;
+    do {
+		outbuf[i] = digits[(num % base)];
+		i++;
+		num /= base;
+    } while (num > 0);
+
+    if (negative != 0) {
+		outbuf[i] = '-';
+		i++;
+	}
+
+    outbuf[i] = 0;
+    i--;
+
+    /* Move the converted number to the buffer and   */
+    /* add in the padding where needed.              */
+    par->len = (s32)strlen(outbuf);
+    padding( !(par->left_flag), par);
+    while (&outbuf[i] >= outbuf) {
+#ifdef STDOUT_BASEADDRESS
+	outbyte( outbuf[i] );
+		i--;
+#endif
+}
+    padding( par->left_flag, par);
+}
+
+/*---------------------------------------------------*/
+/*                                                   */
+/* This routine gets a number from the format        */
+/* string.                                           */
+/*                                                   */
+static s32 getnum( charptr* linep)
+{
+    s32 n;
+    s32 ResultIsDigit = 0;
+    charptr cptr;
+    n = 0;
+    cptr = *linep;
+	if(cptr != NULL){
+		ResultIsDigit = isdigit(((s32)*cptr));
+	}
+    while (ResultIsDigit != 0) {
+		if(cptr != NULL){
+			n = ((n*10) + (((s32)*cptr) - (s32)'0'));
+			cptr += 1;
+			if(cptr != NULL){
+				ResultIsDigit = isdigit(((s32)*cptr));
+			}
+		}
+		ResultIsDigit = isdigit(((s32)*cptr));
+	}
+    *linep = ((charptr )(cptr));
+    return(n);
+}
+
+/*---------------------------------------------------*/
+/*                                                   */
+/* This routine operates just like a printf/sprintf  */
+/* routine. It outputs a set of data under the       */
+/* control of a formatting string. Not all of the    */
+/* standard C format control are supported. The ones */
+/* provided are primarily those needed for embedded  */
+/* systems work. Primarily the floating point        */
+/* routines are omitted. Other formats could be      */
+/* added easily by following the examples shown for  */
+/* the supported formats.                            */
+/*                                                   */
+
+/* void esp_printf( const func_ptr f_ptr,
+   const charptr ctrl1, ...) */
+void xil_printf( const char8 *ctrl1, ...)
+{
+	s32 Check;
+    s32 long_flag;
+    s32 dot_flag;
+
+    params_t par;
+
+    char8 ch;
+    va_list argp;
+    char8 *ctrl = (char8 *)ctrl1;
+
+    va_start( argp, ctrl1);
+
+    while ((ctrl != NULL) && (*ctrl != (char8)0)) {
+
+        /* move format string chars to buffer until a  */
+        /* format control is found.                    */
+        if (*ctrl != '%') {
+#ifdef STDOUT_BASEADDRESS
+            outbyte(*ctrl);
+			ctrl += 1;
+#endif
+            continue;
+        }
+
+        /* initialize all the flags for this format.   */
+        dot_flag = 0;
+		long_flag = 0;
+        par.unsigned_flag = 0;
+		par.left_flag = 0;
+		par.do_padding = 0;
+        par.pad_character = ' ';
+        par.num2=32767;
+		par.num1=0;
+		par.len=0;
+
+ try_next:
+		if(ctrl != NULL) {
+			ctrl += 1;
+		}
+		if(ctrl != NULL) {
+			ch = *ctrl;
+		}
+		else {
+			ch = *ctrl;
+		}
+
+        if (isdigit((s32)ch) != 0) {
+            if (dot_flag != 0) {
+                par.num2 = getnum(&ctrl);
+			}
+            else {
+                if (ch == '0') {
+                    par.pad_character = '0';
+				}
+				if(ctrl != NULL) {
+			par.num1 = getnum(&ctrl);
+				}
+                par.do_padding = 1;
+            }
+            if(ctrl != NULL) {
+			ctrl -= 1;
+			}
+            goto try_next;
+        }
+
+        switch (tolower((s32)ch)) {
+            case '%':
+#ifdef STDOUT_BASEADDRESS
+                outbyte( '%');
+#endif
+                Check = 1;
+                break;
+
+            case '-':
+                par.left_flag = 1;
+                Check = 0;
+                break;
+
+            case '.':
+                dot_flag = 1;
+                Check = 0;
+                break;
+
+            case 'l':
+                long_flag = 1;
+                Check = 0;
+                break;
+
+            case 'u':
+                par.unsigned_flag = 1;
+                /* fall through */
+            case 'i':
+            case 'd':
+                if ((long_flag != 0) || (ch == 'D')) {
+                    outnum( va_arg(argp, s32), 10L, &par);
+                }
+                else {
+                    outnum( va_arg(argp, s32), 10L, &par);
+                }
+				Check = 1;
+                break;
+            case 'p':
+            case 'X':
+            case 'x':
+                par.unsigned_flag = 1;
+                outnum((s32)va_arg(argp, s32), 16L, &par);
+                Check = 1;
+                break;
+
+            case 's':
+                outs( va_arg( argp, char *), &par);
+                Check = 1;
+                break;
+
+            case 'c':
+#ifdef STDOUT_BASEADDRESS
+                outbyte( va_arg( argp, s32));
+#endif
+                Check = 1;
+                break;
+
+            case '\\':
+                switch (*ctrl) {
+                    case 'a':
+#ifdef STDOUT_BASEADDRESS
+                        outbyte( ((char8)0x07));
+#endif
+                        break;
+                    case 'h':
+#ifdef STDOUT_BASEADDRESS
+                        outbyte( ((char8)0x08));
+#endif
+                        break;
+                    case 'r':
+#ifdef STDOUT_BASEADDRESS
+                        outbyte( ((char8)0x0D));
+#endif
+                        break;
+                    case 'n':
+#ifdef STDOUT_BASEADDRESS
+                        outbyte( ((char8)0x0D));
+                        outbyte( ((char8)0x0A));
+#endif
+                        break;
+                    default:
+#ifdef STDOUT_BASEADDRESS
+                        outbyte( *ctrl);
+#endif
+                        break;
+                }
+                ctrl += 1;
+                Check = 0;
+                break;
+
+            default:
+		Check = 1;
+		break;
+        }
+        if(Check == 1) {
+			if(ctrl != NULL) {
+				ctrl += 1;
+			}
+                continue;
+        }
+        goto try_next;
+    }
+    va_end( argp);
+}
+
+/*---------------------------------------------------*/
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_printf.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_printf.h
new file mode 100644
index 000000000..2be5c5734
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_printf.h
@@ -0,0 +1,44 @@
+ #ifndef XIL_PRINTF_H
+ #define XIL_PRINTF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include 
+#include 
+#include 
+#include "xil_types.h"
+#include "xparameters.h"
+
+/*----------------------------------------------------*/
+/* Use the following parameter passing structure to   */
+/* make xil_printf re-entrant.                        */
+/*----------------------------------------------------*/
+
+struct params_s;
+
+
+/*---------------------------------------------------*/
+/* The purpose of this routine is to output data the */
+/* same as the standard printf function without the  */
+/* overhead most run-time libraries involve. Usually */
+/* the printf brings in many kilobytes of code and   */
+/* that is unacceptable in most embedded systems.    */
+/*---------------------------------------------------*/
+
+typedef char8* charptr;
+typedef s32 (*func_ptr)(int c);
+
+/*                                                   */
+
+void xil_printf( const char8 *ctrl1, ...);
+void print( const char8 *ptr);
+extern void outbyte (char8 c);
+extern char8 inbyte(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif	/* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testcache.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testcache.c
new file mode 100644
index 000000000..a2c4b0bbf
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testcache.c
@@ -0,0 +1,366 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_testcache.c
+*
+* Contains utility functions to test cache.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date	 Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a hbm  07/28/09 Initial release
+* 4.1   asa  05/09/14 Ensured that the address uses for cache test is aligned
+*				      cache line.
+* 

+*
+* @note
+*
+* This file contain functions that all operate on HAL.
+*
+******************************************************************************/
+#ifdef __ARM__
+#include "xil_cache.h"
+#include "xil_testcache.h"
+#include "xil_types.h"
+#include "xpseudo_asm.h"
+#ifdef __aarch64__
+#include "xreg_cortexa53.h"
+#else
+#include "xreg_cortexr5.h"
+#endif
+
+#include "xil_types.h"
+
+extern void xil_printf(const char8 *ctrl1, ...);
+
+#define DATA_LENGTH 128
+
+#ifdef __aarch64__
+static INTPTR Data[DATA_LENGTH] __attribute__ ((aligned(64)));
+#else
+static INTPTR Data[DATA_LENGTH] __attribute__ ((aligned(32)));
+#endif
+
+/**
+* Perform DCache range related API test such as Xil_DCacheFlushRange and
+* Xil_DCacheInvalidateRange. This test function writes a constant value
+* to the Data array, flushes the range, writes a new value, then invalidates
+* the corresponding range.
+*
+* @return
+*
+*     - 0 is returned for a pass
+*     - -1 is returned for a failure
+*/
+s32 Xil_TestDCacheRange(void)
+{
+	s32 Index;
+	s32 Status = 0;
+	u32 CtrlReg;
+	INTPTR Value;
+
+	xil_printf("-- Cache Range Test --\n\r");
+
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = 0xA0A00505;
+
+	xil_printf("    initialize Data done:\r\n");
+
+	Xil_DCacheFlushRange((INTPTR)Data, DATA_LENGTH * sizeof(INTPTR));
+
+	xil_printf("    flush range done\r\n");
+
+	dsb();
+	#ifdef __aarch64__
+			CtrlReg = mfcp(SCTLR_EL3);
+			CtrlReg &= ~(XREG_CONTROL_DCACHE_BIT);
+			mtcp(SCTLR_EL3,CtrlReg);
+	#else
+			CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+			CtrlReg &= ~(XREG_CP15_CONTROL_C_BIT);
+			mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	#endif
+	dsb();
+
+	Status = 0;
+
+	for (Index = 0; Index < DATA_LENGTH; Index++) {
+		Value = Data[Index];
+		if (Value != 0xA0A00505) {
+			Status = -1;
+			xil_printf("Data[%d] = %x\r\n", Index, Value);
+			break;
+		}
+	}
+
+	if (!Status) {
+		xil_printf("	Flush worked\r\n");
+	}
+	else {
+		xil_printf("Error: flush dcache range not working\r\n");
+	}
+	dsb();
+	#ifdef __aarch64__
+			CtrlReg = mfcp(SCTLR_EL3);
+			CtrlReg |= (XREG_CONTROL_DCACHE_BIT);
+			mtcp(SCTLR_EL3,CtrlReg);
+		#else
+			CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+			CtrlReg |= (XREG_CP15_CONTROL_C_BIT);
+			mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+		#endif
+	dsb();
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = 0xA0A0C505;
+
+
+
+	Xil_DCacheFlushRange((INTPTR)Data, DATA_LENGTH * sizeof(INTPTR));
+
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = Index + 3;
+
+	Xil_DCacheInvalidateRange((INTPTR)Data, DATA_LENGTH * sizeof(INTPTR));
+
+	xil_printf("    invalidate dcache range done\r\n");
+	dsb();
+	#ifdef __aarch64__
+			CtrlReg = mfcp(SCTLR_EL3);
+			CtrlReg &= ~(XREG_CONTROL_DCACHE_BIT);
+			mtcp(SCTLR_EL3,CtrlReg);
+	#else
+			CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+			CtrlReg &= ~(XREG_CP15_CONTROL_C_BIT);
+			mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	#endif
+	dsb();
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = 0xA0A0A05;
+	dsb();
+	#ifdef __aarch64__
+			CtrlReg = mfcp(SCTLR_EL3);
+			CtrlReg |= (XREG_CONTROL_DCACHE_BIT);
+			mtcp(SCTLR_EL3,CtrlReg);
+	#else
+			CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+			CtrlReg |= (XREG_CP15_CONTROL_C_BIT);
+			mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	#endif
+	dsb();
+
+	Status = 0;
+
+	for (Index = 0; Index < DATA_LENGTH; Index++) {
+		Value = Data[Index];
+		if (Value != 0xA0A0A05) {
+			Status = -1;
+			xil_printf("Data[%d] = %x\r\n", Index, Value);
+			break;
+		}
+	}
+
+
+	if (!Status) {
+		xil_printf("    Invalidate worked\r\n");
+	}
+	else {
+		xil_printf("Error: Invalidate dcache range not working\r\n");
+	}
+	xil_printf("-- Cache Range Test Complete --\r\n");
+	return Status;
+
+}
+
+/**
+* Perform DCache all related API test such as Xil_DCacheFlush and
+* Xil_DCacheInvalidate. This test function writes a constant value
+* to the Data array, flushes the DCache, writes a new value, then invalidates
+* the DCache.
+*
+* @return
+*     - 0 is returned for a pass
+*     - -1 is returned for a failure
+*/
+s32 Xil_TestDCacheAll(void)
+{
+	s32 Index;
+	s32 Status;
+	INTPTR Value;
+	u32 CtrlReg;
+
+	xil_printf("-- Cache All Test --\n\r");
+
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = 0x50500A0A;
+	xil_printf("    initialize Data done:\r\n");
+
+	Xil_DCacheFlush();
+	xil_printf("    flush all done\r\n");
+	dsb();
+	#ifdef __aarch64__
+		CtrlReg = mfcp(SCTLR_EL3);
+		CtrlReg &= ~(XREG_CONTROL_DCACHE_BIT);
+		mtcp(SCTLR_EL3,CtrlReg);
+	#else
+		CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+		CtrlReg &= ~(XREG_CP15_CONTROL_C_BIT);
+		mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	#endif
+	dsb();
+	Status = 0;
+
+	for (Index = 0; Index < DATA_LENGTH; Index++) {
+		Value = Data[Index];
+
+		if (Value != 0x50500A0A) {
+			Status = -1;
+			xil_printf("Data[%d] = %x\r\n", Index, Value);
+			break;
+		}
+	}
+
+	if (!Status) {
+		xil_printf("    Flush all worked\r\n");
+	}
+	else {
+		xil_printf("Error: Flush dcache all not working\r\n");
+	}
+	dsb();
+	#ifdef __aarch64__
+		CtrlReg = mfcp(SCTLR_EL3);
+		CtrlReg |= (XREG_CONTROL_DCACHE_BIT);
+		mtcp(SCTLR_EL3,CtrlReg);
+	#else
+		CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+			CtrlReg |= (XREG_CP15_CONTROL_C_BIT);
+			mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	#endif
+	dsb();
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = 0x505FFA0A;
+
+	Xil_DCacheFlush();
+
+
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = Index + 3;
+
+	Xil_DCacheInvalidate();
+
+	xil_printf("    invalidate all done\r\n");
+	dsb();
+	#ifdef __aarch64__
+		CtrlReg = mfcp(SCTLR_EL3);
+		CtrlReg &= ~(XREG_CONTROL_DCACHE_BIT);
+		mtcp(SCTLR_EL3,CtrlReg);
+	#else
+		CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+		CtrlReg &= ~(XREG_CP15_CONTROL_C_BIT);
+		mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	#endif
+	dsb();
+	for (Index = 0; Index < DATA_LENGTH; Index++)
+		Data[Index] = 0x50CFA0A;
+	dsb();
+	#ifdef __aarch64__
+		CtrlReg = mfcp(SCTLR_EL3);
+		CtrlReg |= (XREG_CONTROL_DCACHE_BIT);
+		mtcp(SCTLR_EL3,CtrlReg);
+	#else
+		CtrlReg = mfcp(XREG_CP15_SYS_CONTROL);
+		CtrlReg |= (XREG_CP15_CONTROL_C_BIT);
+		mtcp(XREG_CP15_SYS_CONTROL, CtrlReg);
+	#endif
+	dsb();
+	Status = 0;
+
+	for (Index = 0; Index < DATA_LENGTH; Index++) {
+		Value = Data[Index];
+		if (Value != 0x50CFA0A) {
+			Status = -1;
+			xil_printf("Data[%d] = %x\r\n", Index, Value);
+			break;
+		}
+	}
+
+	if (!Status) {
+		xil_printf("    Invalidate all worked\r\n");
+	}
+	else {
+			xil_printf("Error: Invalidate dcache all not working\r\n");
+	}
+
+	xil_printf("-- DCache all Test Complete --\n\r");
+
+	return Status;
+}
+
+
+/**
+* Perform Xil_ICacheInvalidateRange() on a few function pointers.
+*
+* @return
+*
+*     - 0 is returned for a pass
+*     The function will hang if it fails.
+*/
+s32 Xil_TestICacheRange(void)
+{
+
+	Xil_ICacheInvalidateRange((INTPTR)Xil_TestICacheRange, 1024);
+	Xil_ICacheInvalidateRange((INTPTR)Xil_TestDCacheRange, 1024);
+	Xil_ICacheInvalidateRange((INTPTR)Xil_TestDCacheAll, 1024);
+
+	xil_printf("-- Invalidate icache range done --\r\n");
+
+	return 0;
+}
+
+/**
+* Perform Xil_ICacheInvalidate().
+*
+* @return
+*
+*     - 0 is returned for a pass
+*     The function will hang if it fails.
+*/
+s32 Xil_TestICacheAll(void)
+{
+	Xil_ICacheInvalidate();
+	xil_printf("-- Invalidate icache all done --\r\n");
+	return 0;
+}
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testcache.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testcache.h
new file mode 100644
index 000000000..b3c416cd0
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testcache.h
@@ -0,0 +1,63 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_testcache.h
+*
+* This file contains utility functions to test cache.
+*
+* Ver    Who    Date    Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a hbm  07/29/09 First release
+*
+******************************************************************************/
+
+#ifndef XIL_TESTCACHE_H	/* prevent circular inclusions */
+#define XIL_TESTCACHE_H	/* by using protection macros */
+
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern s32 Xil_TestDCacheRange(void);
+extern s32 Xil_TestDCacheAll(void);
+extern s32 Xil_TestICacheRange(void);
+extern s32 Xil_TestICacheAll(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testio.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testio.c
new file mode 100644
index 000000000..a68d7652f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testio.c
@@ -0,0 +1,301 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_testmemend.c
+*
+* Contains the memory test utility functions.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver    Who    Date    Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a hbm  08/25/09 First release
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+#include "xil_testio.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions ****************************/
+/************************** Function Prototypes *****************************/
+
+
+
+/**
+ *
+ * Endian swap a 16-bit word.
+ * @param	Data is the 16-bit word to be swapped.
+ * @return	The endian swapped value.
+ *
+ */
+static u16 Swap16(u16 Data)
+{
+	return ((Data >> 8U) & 0x00FFU) | ((Data << 8U) & 0xFF00U);
+}
+
+/**
+ *
+ * Endian swap a 32-bit word.
+ * @param	Data is the 32-bit word to be swapped.
+ * @return	The endian swapped value.
+ *
+ */
+static u32 Swap32(u32 Data)
+{
+	u16 Lo16;
+	u16 Hi16;
+
+	u16 Swap16Lo;
+	u16 Swap16Hi;
+
+	Hi16 = (u16)((Data >> 16U) & 0x0000FFFFU);
+	Lo16 = (u16)(Data & 0x0000FFFFU);
+
+	Swap16Lo = Swap16(Lo16);
+	Swap16Hi = Swap16(Hi16);
+
+	return (((u32)(Swap16Lo)) << 16U) | ((u32)Swap16Hi);
+}
+
+/*****************************************************************************/
+/**
+*
+* Perform a destructive 8-bit wide register IO test where the register is
+* accessed using Xil_Out8 and Xil_In8, and comparing the reading and writing
+* values.
+*
+* @param	Addr is a pointer to the region of memory to be tested.
+* @param	Length is the Length of the block.
+* @param	Value is the constant used for writting the memory.
+*
+* @return
+*
+* - -1 is returned for a failure
+* - 0 is returned for a pass
+*
+*****************************************************************************/
+
+s32 Xil_TestIO8(u8 *Addr, s32 Length, u8 Value)
+{
+	u8 ValueIn;
+	s32 Index;
+	s32 Status = 0;
+
+	for (Index = 0; Index < Length; Index++) {
+		Xil_Out8((INTPTR)Addr, Value);
+
+		ValueIn = Xil_In8((INTPTR)Addr);
+
+		if ((Value != ValueIn) && (Status == 0)) {
+			Status = -1;
+			break;
+		}
+	}
+	return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* Perform a destructive 16-bit wide register IO test. Each location is tested
+* by sequentially writing a 16-bit wide register, reading the register, and
+* comparing value. This function tests three kinds of register IO functions,
+* normal register IO, little-endian register IO, and big-endian register IO.
+* When testing little/big-endian IO, the function performs the following
+* sequence, Xil_Out16LE/Xil_Out16BE, Xil_In16, Compare In-Out values,
+* Xil_Out16, Xil_In16LE/Xil_In16BE, Compare In-Out values. Whether to swap the
+* read-in value before comparing is controlled by the 5th argument.
+*
+* @param	Addr is a pointer to the region of memory to be tested.
+* @param	Length is the Length of the block.
+* @param	Value is the constant used for writting the memory.
+* @param	Kind is the test kind. Acceptable values are:
+*		XIL_TESTIO_DEFAULT, XIL_TESTIO_LE, XIL_TESTIO_BE.
+* @param	Swap indicates whether to byte swap the read-in value.
+*
+* @return
+*
+* - -1 is returned for a failure
+* - 0 is returned for a pass
+*
+*****************************************************************************/
+
+s32 Xil_TestIO16(u16 *Addr, s32 Length, u16 Value, s32 Kind, s32 Swap)
+{
+	u16 *TempAddr16;
+	u16 ValueIn = 0U;
+	s32 Index;
+	TempAddr16 = Addr;
+	Xil_AssertNonvoid(TempAddr16 != NULL);
+
+	for (Index = 0; Index < Length; Index++) {
+		switch (Kind) {
+		case XIL_TESTIO_LE:
+			Xil_Out16LE((INTPTR)TempAddr16, Value);
+			break;
+		case XIL_TESTIO_BE:
+			Xil_Out16BE((INTPTR)TempAddr16, Value);
+			break;
+		default:
+			Xil_Out16((INTPTR)TempAddr16, Value);
+			break;
+		}
+
+		ValueIn = Xil_In16((INTPTR)TempAddr16);
+
+		if ((Kind != 0) && (Swap != 0)) {
+			ValueIn = Swap16(ValueIn);
+		}
+
+		if (Value != ValueIn) {
+			return -1;
+		}
+
+		/* second round */
+		Xil_Out16((INTPTR)TempAddr16, Value);
+
+		switch (Kind) {
+		case XIL_TESTIO_LE:
+			ValueIn = Xil_In16LE((INTPTR)TempAddr16);
+			break;
+		case XIL_TESTIO_BE:
+			ValueIn = Xil_In16BE((INTPTR)TempAddr16);
+			break;
+		default:
+			ValueIn = Xil_In16((INTPTR)TempAddr16);
+			break;
+		}
+
+
+		if ((Kind != 0) && (Swap != 0)) {
+			ValueIn = Swap16(ValueIn);
+		}
+
+		if (Value != ValueIn) {
+			return -1;
+		}
+		TempAddr16 += sizeof(u16);
+	}
+	return 0;
+}
+
+
+/*****************************************************************************/
+/**
+*
+* Perform a destructive 32-bit wide register IO test. Each location is tested
+* by sequentially writing a 32-bit wide regsiter, reading the register, and
+* comparing value. This function tests three kinds of register IO functions,
+* normal register IO, little-endian register IO, and big-endian register IO.
+* When testing little/big-endian IO, the function perform the following
+* sequence, Xil_Out32LE/Xil_Out32BE, Xil_In32, Compare,
+* Xil_Out32, Xil_In32LE/Xil_In32BE, Compare. Whether to swap the read-in value
+* before comparing is controlled by the 5th argument.
+*
+* @param	Addr is a pointer to the region of memory to be tested.
+* @param	Length is the Length of the block.
+* @param	Value is the constant used for writting the memory.
+* @param	Kind is the test kind. Acceptable values are:
+*		XIL_TESTIO_DEFAULT, XIL_TESTIO_LE, XIL_TESTIO_BE.
+* @param	Swap indicates whether to byte swap the read-in value.
+*
+* @return
+*
+* - -1 is returned for a failure
+* - 0 is returned for a pass
+*
+*****************************************************************************/
+s32 Xil_TestIO32(u32 *Addr, s32 Length, u32 Value, s32 Kind, s32 Swap)
+{
+	u32 *TempAddr;
+	u32 ValueIn = 0U;
+	s32 Index;
+	TempAddr = Addr;
+	Xil_AssertNonvoid(TempAddr != NULL);
+
+	for (Index = 0; Index < Length; Index++) {
+		switch (Kind) {
+		case XIL_TESTIO_LE:
+			Xil_Out32LE((INTPTR)TempAddr, Value);
+			break;
+		case XIL_TESTIO_BE:
+			Xil_Out32BE((INTPTR)TempAddr, Value);
+			break;
+		default:
+			Xil_Out32((INTPTR)TempAddr, Value);
+			break;
+		}
+
+		ValueIn = Xil_In32((INTPTR)TempAddr);
+
+		if ((Kind != 0) && (Swap != 0)) {
+			ValueIn = Swap32(ValueIn);
+		}
+
+		if (Value != ValueIn) {
+			return -1;
+		}
+
+		/* second round */
+		Xil_Out32((INTPTR)TempAddr, Value);
+
+
+		switch (Kind) {
+		case XIL_TESTIO_LE:
+			ValueIn = Xil_In32LE((INTPTR)TempAddr);
+			break;
+		case XIL_TESTIO_BE:
+			ValueIn = Xil_In32BE((INTPTR)TempAddr);
+			break;
+		default:
+			ValueIn = Xil_In32((INTPTR)TempAddr);
+			break;
+		}
+
+		if ((Kind != 0) && (Swap != 0)) {
+			ValueIn = Swap32(ValueIn);
+		}
+
+		if (Value != ValueIn) {
+			return -1;
+		}
+		TempAddr += sizeof(u32);
+	}
+	return 0;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testio.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testio.h
new file mode 100644
index 000000000..fba0c1060
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testio.h
@@ -0,0 +1,91 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_testmemend.h
+*
+* This file contains utility functions to teach endian related memory
+* IO functions.
+*
+* Memory test description
+*
+* A subset of the memory tests can be selected or all of the tests can be run
+* in order. If there is an error detected by a subtest, the test stops and the
+* failure code is returned. Further tests are not run even if all of the tests
+* are selected.
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver    Who    Date    Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00 hbm  08/05/09 First release
+* 

+*
+******************************************************************************/
+
+#ifndef XIL_TESTIO_H	/* prevent circular inclusions */
+#define XIL_TESTIO_H	/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+#include "xil_types.h"
+
+/************************** Constant Definitions *****************************/
+
+
+#define XIL_TESTIO_DEFAULT 	0
+#define XIL_TESTIO_LE		1
+#define XIL_TESTIO_BE		2
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+extern s32 Xil_TestIO8(u8 *Addr, s32 Length, u8 Value);
+extern s32 Xil_TestIO16(u16 *Addr, s32 Length, u16 Value, s32 Kind, s32 Swap);
+extern s32 Xil_TestIO32(u32 *Addr, s32 Length, u32 Value, s32 Kind, s32 Swap);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testmem.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testmem.c
new file mode 100644
index 000000000..19a3b6608
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testmem.c
@@ -0,0 +1,882 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_testmem.c
+*
+* Contains the memory test utility functions.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver    Who    Date    Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a hbm  08/25/09 First release
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+#include "xil_testmem.h"
+#include "xil_io.h"
+#include "xil_assert.h"
+
+/************************** Constant Definitions ****************************/
+/************************** Function Prototypes *****************************/
+
+static u32 RotateLeft(u32 Input, u8 Width);
+
+/* define ROTATE_RIGHT to give access to this functionality */
+/* #define ROTATE_RIGHT */
+#ifdef ROTATE_RIGHT
+static u32 RotateRight(u32 Input, u8 Width);
+#endif /* ROTATE_RIGHT */
+
+
+/*****************************************************************************/
+/**
+*
+* Perform a destructive 32-bit wide memory test.
+*
+* @param    Addr is a pointer to the region of memory to be tested.
+* @param    Words is the length of the block.
+* @param    Pattern is the constant used for the constant pattern test, if 0,
+*           0xDEADBEEF is used.
+* @param    Subtest is the test selected. See xil_testmem.h for possible
+*	    values.
+*
+* @return
+*
+* - 0 is returned for a pass
+* - -1 is returned for a failure
+*
+* @note
+*
+* Used for spaces where the address range of the region is smaller than
+* the data width. If the memory range is greater than 2 ** Width,
+* the patterns used in XIL_TESTMEM_WALKONES and XIL_TESTMEM_WALKZEROS will
+* repeat on a boundry of a power of two making it more difficult to detect
+* addressing errors. The XIL_TESTMEM_INCREMENT and XIL_TESTMEM_INVERSEADDR
+* tests suffer the same problem. Ideally, if large blocks of memory are to be
+* tested, break them up into smaller regions of memory to allow the test
+* patterns used not to repeat over the region tested.
+*
+*****************************************************************************/
+s32 Xil_TestMem32(u32 *Addr, u32 Words, u32 Pattern, u8 Subtest)
+{
+	u32 I;
+	u32 j;
+	u32 Val;
+	u32 FirtVal;
+	u32 WordMem32;
+	s32 Status = 0;
+
+	Xil_AssertNonvoid(Words != (u32)0);
+	Xil_AssertNonvoid(Subtest <= (u8)XIL_TESTMEM_MAXTEST);
+	Xil_AssertNonvoid(Addr != NULL);
+
+	/*
+	 * variable initialization
+	 */
+	Val = XIL_TESTMEM_INIT_VALUE;
+	FirtVal = XIL_TESTMEM_INIT_VALUE;
+
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_INCREMENT)) {
+		/*
+		 * Fill the memory with incrementing
+		 * values starting from 'FirtVal'
+		 */
+		for (I = 0U; I < Words; I++) {
+			*(Addr+I) = Val;
+			Val++;
+		}
+
+		/*
+		 * Restore the reference 'Val' to the
+		 * initial value
+		 */
+		Val = FirtVal;
+
+		/*
+		 * Check every word within the words
+		 * of tested memory and compare it
+		 * with the incrementing reference
+		 * Val
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			WordMem32 = *(Addr+I);
+
+			if (WordMem32 != Val) {
+				Status = -1;
+				goto End_Label;
+			}
+
+			Val++;
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_WALKONES)) {
+		/*
+		 * set up to cycle through all possible initial
+		 * test Patterns for walking ones test
+		 */
+
+		for (j = 0U; j < (u32)32; j++) {
+			/*
+			 * Generate an initial value for walking ones test
+			 * to test for bad data bits
+			 */
+
+			Val = (1U << j);
+
+			/*
+			 * START walking ones test
+			 * Write a one to each data bit indifferent locations
+			 */
+
+			for (I = 0U; I < (u32)32; I++) {
+				/* write memory location */
+				*(Addr+I) = Val;
+				Val = (u32) RotateLeft(Val, 32U);
+			}
+
+			/*
+			 * Restore the reference 'val' to the
+			 * initial value
+			 */
+			Val = 1U << j;
+
+			/* Read the values from each location that was
+			 * written */
+			for (I = 0U; I < (u32)32; I++) {
+				/* read memory location */
+
+				WordMem32 = *(Addr+I);
+
+				if (WordMem32 != Val) {
+					Status = -1;
+					goto End_Label;
+				}
+
+				Val = (u32)RotateLeft(Val, 32U);
+			}
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_WALKZEROS)) {
+		/*
+		 * set up to cycle through all possible
+		 * initial test Patterns for walking zeros test
+		 */
+
+		for (j = 0U; j < (u32)32; j++) {
+
+			/*
+			 * Generate an initial value for walking ones test
+			 * to test for bad data bits
+			 */
+
+			Val = ~(1U << j);
+
+			/*
+			 * START walking zeros test
+			 * Write a one to each data bit indifferent locations
+			 */
+
+			for (I = 0U; I < (u32)32; I++) {
+				/* write memory location */
+				*(Addr+I) = Val;
+				Val = ~((u32)RotateLeft(~Val, 32U));
+			}
+
+			/*
+			 * Restore the reference 'Val' to the
+			 * initial value
+			 */
+
+			Val = ~(1U << j);
+
+			/* Read the values from each location that was
+			 * written */
+			for (I = 0U; I < (u32)32; I++) {
+				/* read memory location */
+				WordMem32 = *(Addr+I);
+				if (WordMem32 != Val) {
+					Status = -1;
+					goto End_Label;
+				}
+				Val = ~((u32)RotateLeft(~Val, 32U));
+			}
+
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_INVERSEADDR)) {
+		/* Fill the memory with inverse of address */
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			Val = (u32) (~((INTPTR) (&Addr[I])));
+			*(Addr+I) = Val;
+		}
+
+		/*
+		 * Check every word within the words
+		 * of tested memory
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* Read the location */
+			WordMem32 = *(Addr+I);
+			Val = (u32) (~((INTPTR) (&Addr[I])));
+
+			if ((WordMem32 ^ Val) != 0x00000000U) {
+				Status = -1;
+				goto End_Label;
+			}
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_FIXEDPATTERN)) {
+		/*
+		 * Generate an initial value for
+		 * memory testing
+		 */
+
+		if (Pattern == (u32)0) {
+			Val = 0xDEADBEEFU;
+		}
+		else {
+			Val = Pattern;
+		}
+
+		/*
+		 * Fill the memory with fixed Pattern
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			*(Addr+I) = Val;
+		}
+
+		/*
+		 * Check every word within the words
+		 * of tested memory and compare it
+		 * with the fixed Pattern
+		 */
+
+		for (I = 0U; I < Words; I++) {
+
+			/* read memory location */
+
+			WordMem32 = *(Addr+I);
+			if (WordMem32 != Val) {
+				Status = -1;
+				goto End_Label;
+			}
+		}
+	}
+
+End_Label:
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* Perform a destructive 16-bit wide memory test.
+*
+* @param    Addr is a pointer to the region of memory to be tested.
+* @param    Words is the length of the block.
+* @param    Pattern is the constant used for the constant Pattern test, if 0,
+*           0xDEADBEEF is used.
+* @param    Subtest is the test selected. See xil_testmem.h for possible
+*	    values.
+*
+* @return
+*
+* - -1 is returned for a failure
+* - 0 is returned for a pass
+*
+* @note
+*
+* Used for spaces where the address range of the region is smaller than
+* the data width. If the memory range is greater than 2 ** Width,
+* the patterns used in XIL_TESTMEM_WALKONES and XIL_TESTMEM_WALKZEROS will
+* repeat on a boundry of a power of two making it more difficult to detect
+* addressing errors. The XIL_TESTMEM_INCREMENT and XIL_TESTMEM_INVERSEADDR
+* tests suffer the same problem. Ideally, if large blocks of memory are to be
+* tested, break them up into smaller regions of memory to allow the test
+* patterns used not to repeat over the region tested.
+*
+*****************************************************************************/
+s32 Xil_TestMem16(u16 *Addr, u32 Words, u16 Pattern, u8 Subtest)
+{
+	u32 I;
+	u32 j;
+	u16 Val;
+	u16 FirtVal;
+	u16 WordMem16;
+	s32 Status = 0;
+
+	Xil_AssertNonvoid(Words != (u32)0);
+	Xil_AssertNonvoid(Subtest <= XIL_TESTMEM_MAXTEST);
+	Xil_AssertNonvoid(Addr != NULL);
+
+	/*
+	 * variable initialization
+	 */
+	Val = XIL_TESTMEM_INIT_VALUE;
+	FirtVal = XIL_TESTMEM_INIT_VALUE;
+
+	/*
+	 * selectthe proper Subtest(s)
+	 */
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_INCREMENT)) {
+		/*
+		 * Fill the memory with incrementing
+		 * values starting from 'FirtVal'
+		 */
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			*(Addr+I) = Val;
+			Val++;
+		}
+		/*
+		 * Restore the reference 'Val' to the
+		 * initial value
+		 */
+		Val = FirtVal;
+
+		/*
+		 * Check every word within the words
+		 * of tested memory and compare it
+		 * with the incrementing reference val
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* read memory location */
+			WordMem16 = *(Addr+I);
+			if (WordMem16 != Val) {
+				Status = -1;
+				goto End_Label;
+			}
+			Val++;
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_WALKONES)) {
+		/*
+		 * set up to cycle through all possible initial test
+		 * Patterns for walking ones test
+		 */
+
+		for (j = 0U; j < (u32)16; j++) {
+			/*
+			 * Generate an initial value for walking ones test
+			 * to test for bad data bits
+			 */
+
+			Val = (u16)((u32)1 << j);
+			/*
+			 * START walking ones test
+			 * Write a one to each data bit indifferent locations
+			 */
+
+			for (I = 0U; I < (u32)16; I++) {
+				/* write memory location */
+				*(Addr+I) = Val;
+				Val = (u16)RotateLeft(Val, 16U);
+			}
+			/*
+			 * Restore the reference 'Val' to the
+			 * initial value
+			 */
+			Val = (u16)((u32)1 << j);
+			/* Read the values from each location that was written */
+			for (I = 0U; I < (u32)16; I++) {
+				/* read memory location */
+				WordMem16 = *(Addr+I);
+				if (WordMem16 != Val) {
+					Status = -1;
+					goto End_Label;
+				}
+				Val = (u16)RotateLeft(Val, 16U);
+			}
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_WALKZEROS)) {
+		/*
+		 * set up to cycle through all possible initial
+		 * test Patterns for walking zeros test
+		 */
+
+		for (j = 0U; j < (u32)16; j++) {
+			/*
+			 * Generate an initial value for walking ones
+			 * test to test for bad
+			 * data bits
+			 */
+
+			Val = ~(1U << j);
+			/*
+			 * START walking zeros test
+			 * Write a one to each data bit indifferent locations
+			 */
+
+			for (I = 0U; I < (u32)16; I++) {
+				/* write memory location */
+				*(Addr+I) = Val;
+				Val = ~((u16)RotateLeft(~Val, 16U));
+			}
+			/*
+			 * Restore the reference 'Val' to the
+			 * initial value
+			 */
+			Val = ~(1U << j);
+			/* Read the values from each location that was written */
+			for (I = 0U; I < (u32)16; I++) {
+				/* read memory location */
+				WordMem16 = *(Addr+I);
+				if (WordMem16 != Val) {
+					Status = -1;
+					goto End_Label;
+				}
+				Val = ~((u16)RotateLeft(~Val, 16U));
+			}
+
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_INVERSEADDR)) {
+		/* Fill the memory with inverse of address */
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			Val = (u16) (~((INTPTR)(&Addr[I])));
+			*(Addr+I) = Val;
+		}
+		/*
+		 * Check every word within the words
+		 * of tested memory
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* read memory location */
+			WordMem16 = *(Addr+I);
+			Val = (u16) (~((INTPTR) (&Addr[I])));
+			if ((WordMem16 ^ Val) != 0x0000U) {
+				Status = -1;
+				goto End_Label;
+			}
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_FIXEDPATTERN)) {
+		/*
+		 * Generate an initial value for
+		 * memory testing
+		 */
+		if (Pattern == (u16)0) {
+			Val = 0xDEADU;
+		}
+		else {
+			Val = Pattern;
+		}
+
+		/*
+		 * Fill the memory with fixed pattern
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			*(Addr+I) = Val;
+		}
+
+		/*
+		 * Check every word within the words
+		 * of tested memory and compare it
+		 * with the fixed pattern
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* read memory location */
+			WordMem16 = *(Addr+I);
+			if (WordMem16 != Val) {
+				Status = -1;
+				goto End_Label;
+			}
+		}
+	}
+
+End_Label:
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+*
+* Perform a destructive 8-bit wide memory test.
+*
+* @param    Addr is a pointer to the region of memory to be tested.
+* @param    Words is the length of the block.
+* @param    Pattern is the constant used for the constant pattern test, if 0,
+*           0xDEADBEEF is used.
+* @param    Subtest is the test selected. See xil_testmem.h for possible
+*	    values.
+*
+* @return
+*
+* - -1 is returned for a failure
+* - 0 is returned for a pass
+*
+* @note
+*
+* Used for spaces where the address range of the region is smaller than
+* the data width. If the memory range is greater than 2 ** Width,
+* the patterns used in XIL_TESTMEM_WALKONES and XIL_TESTMEM_WALKZEROS will
+* repeat on a boundry of a power of two making it more difficult to detect
+* addressing errors. The XIL_TESTMEM_INCREMENT and XIL_TESTMEM_INVERSEADDR
+* tests suffer the same problem. Ideally, if large blocks of memory are to be
+* tested, break them up into smaller regions of memory to allow the test
+* patterns used not to repeat over the region tested.
+*
+*****************************************************************************/
+s32 Xil_TestMem8(u8 *Addr, u32 Words, u8 Pattern, u8 Subtest)
+{
+	u32 I;
+	u32 j;
+	u8 Val;
+	u8 FirtVal;
+	u8 WordMem8;
+	s32 Status = 0;
+
+	Xil_AssertNonvoid(Words != (u32)0);
+	Xil_AssertNonvoid(Subtest <= XIL_TESTMEM_MAXTEST);
+	Xil_AssertNonvoid(Addr != NULL);
+
+	/*
+	 * variable initialization
+	 */
+	Val = XIL_TESTMEM_INIT_VALUE;
+	FirtVal = XIL_TESTMEM_INIT_VALUE;
+
+	/*
+	 * select the proper Subtest(s)
+	 */
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_INCREMENT)) {
+		/*
+		 * Fill the memory with incrementing
+		 * values starting from 'FirtVal'
+		 */
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			*(Addr+I) = Val;
+			Val++;
+		}
+		/*
+		 * Restore the reference 'Val' to the
+		 * initial value
+		 */
+		Val = FirtVal;
+		/*
+		 * Check every word within the words
+		 * of tested memory and compare it
+		 * with the incrementing reference
+		 * Val
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* read memory location */
+			WordMem8 = *(Addr+I);
+			if (WordMem8 != Val) {
+				Status = -1;
+				goto End_Label;
+			}
+			Val++;
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_WALKONES)) {
+		/*
+		 * set up to cycle through all possible initial
+		 * test Patterns for walking ones test
+		 */
+
+		for (j = 0U; j < (u32)8; j++) {
+			/*
+			 * Generate an initial value for walking ones test
+			 * to test for bad data bits
+			 */
+			Val = (u8)((u32)1 << j);
+			/*
+			 * START walking ones test
+			 * Write a one to each data bit indifferent locations
+			 */
+			for (I = 0U; I < (u32)8; I++) {
+				/* write memory location */
+				*(Addr+I) = Val;
+				Val = (u8)RotateLeft(Val, 8U);
+			}
+			/*
+			 * Restore the reference 'Val' to the
+			 * initial value
+			 */
+			Val = (u8)((u32)1 << j);
+			/* Read the values from each location that was written */
+			for (I = 0U; I < (u32)8; I++) {
+				/* read memory location */
+				WordMem8 = *(Addr+I);
+				if (WordMem8 != Val) {
+					Status = -1;
+					goto End_Label;
+				}
+				Val = (u8)RotateLeft(Val, 8U);
+			}
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_WALKZEROS)) {
+		/*
+		 * set up to cycle through all possible initial test
+		 * Patterns for walking zeros test
+		 */
+
+		for (j = 0U; j < (u32)8; j++) {
+			/*
+			 * Generate an initial value for walking ones test to test
+			 * for bad data bits
+			 */
+			Val = ~(1U << j);
+			/*
+			 * START walking zeros test
+			 * Write a one to each data bit indifferent locations
+			 */
+			for (I = 0U; I < (u32)8; I++) {
+				/* write memory location */
+				*(Addr+I) = Val;
+				Val = ~((u8)RotateLeft(~Val, 8U));
+			}
+			/*
+			 * Restore the reference 'Val' to the
+			 * initial value
+			 */
+			Val = ~(1U << j);
+			/* Read the values from each location that was written */
+			for (I = 0U; I < (u32)8; I++) {
+				/* read memory location */
+				WordMem8 = *(Addr+I);
+				if (WordMem8 != Val) {
+					Status = -1;
+					goto End_Label;
+				}
+
+				Val = ~((u8)RotateLeft(~Val, 8U));
+			}
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_INVERSEADDR)) {
+		/* Fill the memory with inverse of address */
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			Val = (u8) (~((INTPTR) (&Addr[I])));
+			*(Addr+I) = Val;
+		}
+
+		/*
+		 * Check every word within the words
+		 * of tested memory
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* read memory location */
+			WordMem8 = *(Addr+I);
+			Val = (u8) (~((INTPTR) (&Addr[I])));
+			if ((WordMem8 ^ Val) != 0x00U) {
+				Status = -1;
+				goto End_Label;
+			}
+		}
+	}
+
+	if((Subtest == XIL_TESTMEM_ALLMEMTESTS) || (Subtest == XIL_TESTMEM_FIXEDPATTERN)) {
+		/*
+		 * Generate an initial value for
+		 * memory testing
+		 */
+
+		if (Pattern == (u8)0) {
+			Val = 0xA5U;
+		}
+		else {
+			Val = Pattern;
+		}
+		/*
+		 * Fill the memory with fixed Pattern
+		 */
+		for (I = 0U; I < Words; I++) {
+			/* write memory location */
+			*(Addr+I) = Val;
+		}
+		/*
+		 * Check every word within the words
+		 * of tested memory and compare it
+		 * with the fixed Pattern
+		 */
+
+		for (I = 0U; I < Words; I++) {
+			/* read memory location */
+			WordMem8 = *(Addr+I);
+			if (WordMem8 != Val) {
+				Status = -1;
+				goto End_Label;
+			}
+		}
+	}
+
+End_Label:
+	return Status;
+}
+
+
+/*****************************************************************************/
+/**
+*
+* Rotates the provided value to the left one bit position
+*
+* @param    Input is value to be rotated to the left
+* @param    Width is the number of bits in the input data
+*
+* @return
+*
+* The resulting unsigned long value of the rotate left
+*
+* @note
+*
+* None.
+*
+*****************************************************************************/
+static u32 RotateLeft(u32 Input, u8 Width)
+{
+	u32 Msb;
+	u32 ReturnVal;
+	u32 WidthMask;
+	u32 MsbMask;
+	u32 LocalInput = Input;
+
+	/*
+	 * set up the WidthMask and the MsbMask
+	 */
+
+	MsbMask = 1U << (Width - 1U);
+
+	WidthMask = (MsbMask << (u32)1) - (u32)1;
+
+	/*
+	 * set the Width of the Input to the correct width
+	 */
+
+	LocalInput = LocalInput & WidthMask;
+
+	Msb = LocalInput & MsbMask;
+
+	ReturnVal = LocalInput << 1U;
+
+	if (Msb != 0x00000000U) {
+		ReturnVal = ReturnVal | (u32)0x00000001;
+	}
+
+	ReturnVal = ReturnVal & WidthMask;
+
+	return ReturnVal;
+
+}
+
+#ifdef ROTATE_RIGHT
+/*****************************************************************************/
+/**
+*
+* Rotates the provided value to the right one bit position
+*
+* @param    Input is value to be rotated to the right
+* @param    Width is the number of bits in the input data
+*
+* @return
+*
+* The resulting u32 value of the rotate right
+*
+* @note
+*
+* None.
+*
+*****************************************************************************/
+static u32 RotateRight(u32 Input, u8 Width)
+{
+	u32 Lsb;
+	u32 ReturnVal;
+	u32 WidthMask;
+	u32 MsbMask;
+	u32 LocalInput = Input;
+	/*
+	 * set up the WidthMask and the MsbMask
+	 */
+
+	MsbMask = 1U << (Width - 1U);
+
+	WidthMask = (MsbMask << 1U) - 1U;
+
+	/*
+	 * set the width of the input to the correct width
+	 */
+
+	LocalInput = LocalInput & WidthMask;
+
+	ReturnVal = LocalInput >> 1U;
+
+	Lsb = LocalInput & 0x00000001U;
+
+	if (Lsb != 0x00000000U) {
+		ReturnVal = ReturnVal | MsbMask;
+	}
+
+	ReturnVal = ReturnVal & WidthMask;
+
+	return ReturnVal;
+
+}
+#endif /* ROTATE_RIGHT */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testmem.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testmem.h
new file mode 100644
index 000000000..4cbfd878b
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_testmem.h
@@ -0,0 +1,162 @@
+/******************************************************************************
+*
+* Copyright (C) 2009 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_testmem.h
+*
+* This file contains utility functions to test memory.
+*
+* Memory test description
+*
+* A subset of the memory tests can be selected or all of the tests can be run
+* in order. If there is an error detected by a subtest, the test stops and the
+* failure code is returned. Further tests are not run even if all of the tests
+* are selected.
+*
+* Subtest descriptions:
+* 
+* XIL_TESTMEM_ALLMEMTESTS:
+*       Runs all of the following tests
+*
+* XIL_TESTMEM_INCREMENT:
+*       Incrementing Value Test.
+*       This test starts at 'XIL_TESTMEM_INIT_VALUE' and uses the
+*	incrementing value as the test value for memory.
+*
+* XIL_TESTMEM_WALKONES:
+*       Walking Ones Test.
+*       This test uses a walking '1' as the test value for memory.
+*       location 1 = 0x00000001
+*       location 2 = 0x00000002
+*       ...
+*
+* XIL_TESTMEM_WALKZEROS:
+*       Walking Zero's Test.
+*       This test uses the inverse value of the walking ones test
+*       as the test value for memory.
+*       location 1 = 0xFFFFFFFE
+*       location 2 = 0xFFFFFFFD
+*       ...
+*
+* XIL_TESTMEM_INVERSEADDR:
+*       Inverse Address Test.
+*       This test uses the inverse of the address of the location under test
+*       as the test value for memory.
+*
+* XIL_TESTMEM_FIXEDPATTERN:
+*       Fixed Pattern Test.
+*       This test uses the provided patters as the test value for memory.
+*       If zero is provided as the pattern the test uses '0xDEADBEEF".
+* 

+*
+* WARNING
+*
+* The tests are DESTRUCTIVE. Run before any initialized memory spaces
+* have been set up.
+*
+* The address provided to the memory tests is not checked for
+* validity except for the NULL case. It is possible to provide a code-space
+* pointer for this test to start with and ultimately destroy executable code
+* causing random failures.
+*
+* @note
+*
+* Used for spaces where the address range of the region is smaller than
+* the data width. If the memory range is greater than 2 ** width,
+* the patterns used in XIL_TESTMEM_WALKONES and XIL_TESTMEM_WALKZEROS will
+* repeat on a boundry of a power of two making it more difficult to detect
+* addressing errors. The XIL_TESTMEM_INCREMENT and XIL_TESTMEM_INVERSEADDR
+* tests suffer the same problem. Ideally, if large blocks of memory are to be
+* tested, break them up into smaller regions of memory to allow the test
+* patterns used not to repeat over the region tested.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver    Who    Date    Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a hbm  08/25/09 First release
+* 

+*
+******************************************************************************/
+
+#ifndef XIL_TESTMEM_H	/* prevent circular inclusions */
+#define XIL_TESTMEM_H	/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+#include "xil_types.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+/* xutil_memtest defines */
+
+#define XIL_TESTMEM_INIT_VALUE	1U
+
+/** @name Memory subtests
+ * @{
+ */
+/**
+ * See the detailed description of the subtests in the file description.
+ */
+#define XIL_TESTMEM_ALLMEMTESTS     0x00U
+#define XIL_TESTMEM_INCREMENT       0x01U
+#define XIL_TESTMEM_WALKONES        0x02U
+#define XIL_TESTMEM_WALKZEROS       0x03U
+#define XIL_TESTMEM_INVERSEADDR     0x04U
+#define XIL_TESTMEM_FIXEDPATTERN    0x05U
+#define XIL_TESTMEM_MAXTEST         XIL_TESTMEM_FIXEDPATTERN
+/* @} */
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+/* xutil_testmem prototypes */
+
+extern s32 Xil_TestMem32(u32 *Addr, u32 Words, u32 Pattern, u8 Subtest);
+extern s32 Xil_TestMem16(u16 *Addr, u32 Words, u16 Pattern, u8 Subtest);
+extern s32 Xil_TestMem8(u8 *Addr, u32 Words, u8 Pattern, u8 Subtest);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_types.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_types.h
new file mode 100644
index 000000000..e8b78b7c6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xil_types.h
@@ -0,0 +1,200 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xil_types.h
+*
+* This file contains basic types for Xilinx software IP.
+
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date   Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a hbm  07/14/09 First release
+* 3.03a sdm  05/30/11 Added Xuint64 typedef and XUINT64_MSW/XUINT64_LSW macros
+* 5.00 	pkp  05/29/14 Made changes for 64 bit architecture
+*	srt  07/14/14 Use standard definitions from stdint.h and stddef.h
+*		      Define LONG and ULONG datatypes and mask values
+* 

+*
+******************************************************************************/
+
+#ifndef XIL_TYPES_H	/* prevent circular inclusions */
+#define XIL_TYPES_H	/* by using protection macros */
+
+#include 
+#include 
+
+/************************** Constant Definitions *****************************/
+
+#ifndef TRUE
+#  define TRUE		1U
+#endif
+
+#ifndef FALSE
+#  define FALSE		0U
+#endif
+
+#ifndef NULL
+#define NULL		0U
+#endif
+
+#define XIL_COMPONENT_IS_READY     0x11111111U  /**< component has been initialized */
+#define XIL_COMPONENT_IS_STARTED   0x22222222U  /**< component has been started */
+
+/** @name New types
+ * New simple types.
+ * @{
+ */
+#ifndef __KERNEL__
+#ifndef XBASIC_TYPES_H
+/**
+ * guarded against xbasic_types.h.
+ */
+typedef uint8_t u8;
+typedef uint16_t u16;
+typedef uint32_t u32;
+
+#define __XUINT64__
+typedef struct
+{
+	u32 Upper;
+	u32 Lower;
+} Xuint64;
+
+
+/*****************************************************************************/
+/**
+* Return the most significant half of the 64 bit data type.
+*
+* @param    x is the 64 bit word.
+*
+* @return   The upper 32 bits of the 64 bit word.
+*
+* @note     None.
+*
+******************************************************************************/
+#define XUINT64_MSW(x) ((x).Upper)
+
+/*****************************************************************************/
+/**
+* Return the least significant half of the 64 bit data type.
+*
+* @param    x is the 64 bit word.
+*
+* @return   The lower 32 bits of the 64 bit word.
+*
+* @note     None.
+*
+******************************************************************************/
+#define XUINT64_LSW(x) ((x).Lower)
+
+#endif /* XBASIC_TYPES_H */
+
+/**
+ * xbasic_types.h does not typedef s* or u64
+ */
+
+typedef char char8;
+typedef int8_t s8;
+typedef int16_t s16;
+typedef int32_t s32;
+typedef int64_t s64;
+typedef uint64_t u64;
+typedef int sint32;
+
+typedef intptr_t INTPTR;
+typedef uintptr_t UINTPTR;
+typedef ptrdiff_t PTRDIFF;
+
+#if !defined(LONG) || !defined(ULONG)
+typedef long LONG;
+typedef unsigned long ULONG;
+#endif
+
+#define ULONG64_HI_MASK	0xFFFFFFFF00000000U
+#define ULONG64_LO_MASK	~ULONG64_HI_MASK
+
+#else
+#include 
+#endif
+
+
+/**
+ * This data type defines an interrupt handler for a device.
+ * The argument points to the instance of the component
+ */
+typedef void (*XInterruptHandler) (void *InstancePtr);
+
+/**
+ * This data type defines an exception handler for a processor.
+ * The argument points to the instance of the component
+ */
+typedef void (*XExceptionHandler) (void *InstancePtr);
+
+/**
+ * UPPER_32_BITS - return bits 32-63 of a number
+ * @n: the number we're accessing
+ *
+ * A basic shift-right of a 64- or 32-bit quantity.  Use this to suppress
+ * the "right shift count >= width of type" warning when that quantity is
+ * 32-bits.
+ */
+#define UPPER_32_BITS(n) ((u32)(((n) >> 16) >> 16))
+
+/**
+ * LOWER_32_BITS - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define LOWER_32_BITS(n) ((u32)(n))
+
+/*@}*/
+
+
+/************************** Constant Definitions *****************************/
+
+#ifndef TRUE
+#define TRUE		1U
+#endif
+
+#ifndef FALSE
+#define FALSE		0U
+#endif
+
+#ifndef NULL
+#define NULL		0U
+#endif
+
+#endif	/* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xparameters_ps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xparameters_ps.h
new file mode 100644
index 000000000..91d6b6408
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xparameters_ps.h
@@ -0,0 +1,358 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xparameters_ps.h
+*
+* This file contains the address definitions for the hard peripherals
+* attached to the ARM Cortex R5 core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------- -------- ---------------------------------------------------
+* 5.00  pkp  	02/29/14 Initial version
+* 

+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+
+#ifndef XPARAMETERS_PS_H_
+#define XPARAMETERS_PS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/************************** Constant Definitions *****************************/
+
+/*
+ * This block contains constant declarations for the peripherals
+ * within the hardblock
+ */
+
+/* Canonical definitions for DDR MEMORY */
+#define XPAR_DDR_MEM_BASEADDR		0x00000000U
+#define XPAR_DDR_MEM_HIGHADDR		0x3FFFFFFFU
+
+/* Canonical definitions for Interrupts  */
+#define XPAR_XUARTPS_0_INTR		XPS_UART0_INT_ID
+#define XPAR_XUARTPS_1_INTR		XPS_UART1_INT_ID
+#define XPAR_XIICPS_0_INTR		XPS_I2C0_INT_ID
+#define XPAR_XIICPS_1_INTR		XPS_I2C1_INT_ID
+#define XPAR_XSPIPS_0_INTR		XPS_SPI0_INT_ID
+#define XPAR_XSPIPS_1_INTR		XPS_SPI1_INT_ID
+#define XPAR_XCANPS_0_INTR		XPS_CAN0_INT_ID
+#define XPAR_XCANPS_1_INTR		XPS_CAN1_INT_ID
+#define XPAR_XGPIOPS_0_INTR		XPS_GPIO_INT_ID
+#define XPAR_XEMACPS_0_INTR		XPS_GEM0_INT_ID
+#define XPAR_XEMACPS_0_WAKE_INTR	XPS_GEM0_WAKE_INT_ID
+#define XPAR_XEMACPS_1_INTR		XPS_GEM1_INT_ID
+#define XPAR_XEMACPS_1_WAKE_INTR	XPS_GEM1_WAKE_INT_ID
+#define XPAR_XEMACPS_2_INTR		XPS_GEM2_INT_ID
+#define XPAR_XEMACPS_2_WAKE_INTR	XPS_GEM2_WAKE_INT_ID
+#define XPAR_XEMACPS_3_INTR		XPS_GEM3_INT_ID
+#define XPAR_XEMACPS_3_WAKE_INTR	XPS_GEM3_WAKE_INT_ID
+#define XPAR_XSDIOPS_0_INTR		XPS_SDIO0_INT_ID
+#define XPAR_XQSPIPS_0_INTR		XPS_QSPI_INT_ID
+#define XPAR_XSDIOPS_1_INTR		XPS_SDIO1_INT_ID
+#define XPAR_XWDTPS_0_INTR		XPS_WDT_INT_ID
+#define XPAR_XDCFG_0_INTR		XPS_DVC_INT_ID
+#define XPAR_SCUTIMER_INTR		XPS_SCU_TMR_INT_ID
+#define XPAR_SCUWDT_INTR		XPS_SCU_WDT_INT_ID
+#define XPAR_XTTCPS_0_INTR		XPS_TTC0_0_INT_ID
+#define XPAR_XTTCPS_1_INTR		XPS_TTC0_1_INT_ID
+#define XPAR_XTTCPS_2_INTR		XPS_TTC0_2_INT_ID
+#define XPAR_XTTCPS_3_INTR		XPS_TTC1_0_INT_ID
+#define XPAR_XTTCPS_4_INTR		XPS_TTC1_1_INT_ID
+#define XPAR_XTTCPS_5_INTR		XPS_TTC1_2_INT_ID
+#define XPAR_XTTCPS_6_INTR		XPS_TTC2_0_INT_ID
+#define XPAR_XTTCPS_7_INTR		XPS_TTC2_1_INT_ID
+#define XPAR_XTTCPS_8_INTR		XPS_TTC2_2_INT_ID
+#define XPAR_XTTCPS_9_INTR		XPS_TTC3_0_INT_ID
+#define XPAR_XTTCPS_10_INTR		XPS_TTC3_1_INT_ID
+#define XPAR_XTTCPS_11_INTR		XPS_TTC3_2_INT_ID
+#define XPAR_XDMAPS_0_FAULT_INTR	XPS_DMA0_ABORT_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_0	XPS_DMA0_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_1	XPS_DMA1_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_2	XPS_DMA2_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_3	XPS_DMA3_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_4	XPS_DMA4_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_5	XPS_DMA5_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_6	XPS_DMA6_INT_ID
+#define XPAR_XDMAPS_0_DONE_INTR_7	XPS_DMA7_INT_ID
+#define XPAR_XNANDPS8_0_INTR        	XPS_NAND_INT_ID
+#define XPAR_XADMAPS_0_INTR 		XPS_ADMA_CH0_INT_ID
+#define XPAR_XADMAPS_1_INTR 		XPS_ADMA_CH1_INT_ID
+#define XPAR_XADMAPS_2_INTR		XPS_ADMA_CH2_INT_ID
+#define XPAR_XADMAPS_3_INTR 		XPS_ADMA_CH3_INT_ID
+#define XPAR_XADMAPS_4_INTR		XPS_ADMA_CH4_INT_ID
+#define XPAR_XADMAPS_5_INTR 		XPS_ADMA_CH5_INT_ID
+#define XPAR_XADMAPS_6_INTR 		XPS_ADMA_CH6_INT_ID
+#define XPAR_XADMAPS_7_INTR 		XPS_ADMA_CH7_INT_ID
+#define XPAR_XCSUDMA_INTR 		XPS_CSU_DMA_INT_ID
+#define XPAR_XMPU_LPD_INTR 		XPS_XMPU_LPD_INT_ID
+#define XPAR_XZDMAPS_0_INTR		XPS_ZDMA_CH0_INT_ID
+#define XPAR_XZDMAPS_1_INTR		XPS_ZDMA_CH1_INT_ID
+#define XPAR_XZDMAPS_2_INTR 		XPS_ZDMA_CH2_INT_ID
+#define XPAR_XZDMAPS_3_INTR 		XPS_ZDMA_CH3_INT_ID
+#define XPAR_XZDMAPS_4_INTR		XPS_ZDMA_CH4_INT_ID
+#define XPAR_XZDMAPS_5_INTR 		XPS_ZDMA_CH5_INT_ID
+#define XPAR_XZDMAPS_6_INTR 		XPS_ZDMA_CH6_INT_ID
+#define XPAR_XZDMAPS_7_INTR 		XPS_ZDMA_CH7_INT_ID
+#define XPAR_XMPU_FPD_INTR 		XPS_XMPU_FPD_INT_ID
+#define XPAR_XCCI_FPD_INTR 		XPS_FPD_CCI_INT_ID
+#define XPAR_XSMMU_FPD_INTR 		XPS_FPD_SMMU_INT_ID
+#define XPAR_XUSBPS_0_INTR		XPS_USB3_0_ENDPT_INT_ID
+#define XPAR_XUSBPS_1_INTR		XPS_USB3_1_ENDPT_INT_ID
+#define	XPAR_XRTCPSU_ALARM_INTR 	XPS_RTC_ALARM_INT_ID
+#define	XPAR_XRTCPSU_SECONDS_INTR	XPS_RTC_SEC_INT_ID
+#define XPAR_XAPMPS_0_INTR		XPS_APM0_INT_ID
+#define XPAR_XAPMPS_1_INTR		XPS_APM1_INT_ID
+#define XPAR_XAPMPS_2_INTR		XPS_APM2_INT_ID
+#define XPAR_XAPMPS_5_INTR		XPS_APM5_INT_ID
+#define XPAR_XSYSMONPSU_INTR		XPS_AMS_INT_ID
+
+/* Canonical definitions for SCU GIC */
+#define XPAR_SCUGIC_NUM_INSTANCES	1U
+#define XPAR_SCUGIC_SINGLE_DEVICE_ID	0U
+#define XPAR_SCUGIC_CPU_BASEADDR	(XPS_SCU_PERIPH_BASE + 0x00001000U)
+#define XPAR_SCUGIC_DIST_BASEADDR	(XPS_SCU_PERIPH_BASE + 0x00002000U)
+#define XPAR_SCUGIC_ACK_BEFORE		0U
+
+#define XPAR_CPU_CORTEXR5_CORE_CLOCK_FREQ_HZ	XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ
+
+
+/*
+ * This block contains constant declarations for the peripherals
+ * within the hardblock. These have been put for bacwards compatibilty
+ */
+
+#define XPS_SYS_CTRL_BASEADDR	0xFF180000U
+#define XPS_SCU_PERIPH_BASE		0xF9000000U
+
+
+/* Shared Peripheral Interrupts (SPI) */
+
+/* FIXME */
+/*#define XPS_FPGA0_INT_ID		100U */
+#define XPS_FPGA1_INT_ID		62U
+#define XPS_FPGA2_INT_ID		63U
+#define XPS_FPGA3_INT_ID		64U
+#define XPS_FPGA4_INT_ID		65U
+#define XPS_FPGA5_INT_ID		66U
+#define XPS_FPGA6_INT_ID		67U
+#define XPS_FPGA7_INT_ID		68U
+#define XPS_DMA4_INT_ID			72U
+#define XPS_DMA5_INT_ID			73U
+#define XPS_DMA6_INT_ID			74U
+#define XPS_DMA7_INT_ID			75U
+#define XPS_FPGA8_INT_ID		84U
+#define XPS_FPGA9_INT_ID		85U
+#define XPS_FPGA10_INT_ID		86U
+#define XPS_FPGA11_INT_ID		87U
+#define XPS_FPGA12_INT_ID		88U
+#define XPS_FPGA13_INT_ID		89U
+#define XPS_FPGA14_INT_ID		90U
+#define XPS_FPGA15_INT_ID		91U
+
+/* Updated Interrupt-IDs */
+#define XPS_OCMINTR_INT_ID		(10U + 32U)
+#define XPS_NAND_INT_ID        		(14U + 32U)
+#define XPS_QSPI_INT_ID			(15U + 32U)
+#define XPS_GPIO_INT_ID			(16U + 32U)
+#define XPS_I2C0_INT_ID			(17U + 32U)
+#define XPS_I2C1_INT_ID			(18U + 32U)
+#define XPS_SPI0_INT_ID			(19U + 32U)
+#define XPS_SPI1_INT_ID			(20U + 32U)
+#define XPS_UART0_INT_ID		(21U + 32U)
+#define XPS_UART1_INT_ID		(22U + 32U)
+#define XPS_CAN0_INT_ID			(23U + 32U)
+#define XPS_CAN1_INT_ID			(24U + 32U)
+#define	XPS_RTC_ALARM_INT_ID 	(26U + 32U)
+#define	XPS_RTC_SEC_INT_ID	 	(27U + 32U)
+#define XPS_WDT_INT_ID			(52U + 32U)
+#define XPS_TTC0_0_INT_ID		(36U + 32U)
+#define XPS_TTC0_1_INT_ID		(37U + 32U)
+#define XPS_TTC0_2_INT_ID 		(38U + 32U)
+#define XPS_TTC1_0_INT_ID		(39U + 32U)
+#define XPS_TTC1_1_INT_ID		(40U + 32U)
+#define XPS_TTC1_2_INT_ID		(41U + 32U)
+#define XPS_TTC2_0_INT_ID		(42U + 32U)
+#define XPS_TTC2_1_INT_ID		(43U + 32U)
+#define XPS_TTC2_2_INT_ID		(44U + 32U)
+#define XPS_TTC3_0_INT_ID		(45U + 32U)
+#define XPS_TTC3_1_INT_ID		(46U + 32U)
+#define XPS_TTC3_2_INT_ID		(47U + 32U)
+#define XPS_SDIO0_INT_ID		(48U + 32U)
+#define XPS_SDIO1_INT_ID		(49U + 32U)
+#define XPS_AMS_INT_ID			(56U + 32U)
+#define XPS_GEM0_INT_ID			(57U + 32U)
+#define XPS_GEM0_WAKE_INT_ID		(58U + 32U)
+#define XPS_GEM1_INT_ID			(59U + 32U)
+#define XPS_GEM1_WAKE_INT_ID		(60U + 32U)
+#define XPS_GEM2_INT_ID			(61U + 32U)
+#define XPS_GEM2_WAKE_INT_ID		(62U + 32U)
+#define XPS_GEM3_INT_ID			(63U + 32U)
+#define XPS_GEM3_WAKE_INT_ID		(64U + 32U)
+#define XPS_USB3_0_ENDPT_INT_ID		(65U + 32U)
+#define XPS_USB3_1_ENDPT_INT_ID		(70U + 32U)
+#define XPS_ADMA_CH0_INT_ID		(77U + 32U)
+#define XPS_ADMA_CH1_INT_ID		(78U + 32U)
+#define XPS_ADMA_CH2_INT_ID		(79U + 32U)
+#define XPS_ADMA_CH3_INT_ID		(80U + 32U)
+#define XPS_ADMA_CH4_INT_ID		(81U + 32U)
+#define XPS_ADMA_CH5_INT_ID		(82U + 32U)
+#define XPS_ADMA_CH6_INT_ID		(83U + 32U)
+#define XPS_ADMA_CH7_INT_ID		(84U + 32U)
+#define XPS_CSU_DMA_INT_ID		(86U + 32U)
+#define XPS_XMPU_LPD_INT_ID		(88U + 32U)
+#define XPS_ZDMA_CH0_INT_ID		(124U + 32U)
+#define XPS_ZDMA_CH1_INT_ID		(125U + 32U)
+#define XPS_ZDMA_CH2_INT_ID		(126U + 32U)
+#define XPS_ZDMA_CH3_INT_ID		(127U + 32U)
+#define XPS_ZDMA_CH4_INT_ID		(128U + 32U)
+#define XPS_ZDMA_CH5_INT_ID		(129U + 32U)
+#define XPS_ZDMA_CH6_INT_ID		(130U + 32U)
+#define XPS_ZDMA_CH7_INT_ID		(131U + 32U)
+#define XPS_XMPU_FPD_INT_ID		(134U + 32U)
+#define XPS_FPD_CCI_INT_ID		(154U + 32U)
+#define XPS_FPD_SMMU_INT_ID		(155U + 32U)
+#define XPS_APM0_INT_ID		(123U + 32U)
+#define XPS_APM1_INT_ID		(25U + 32U)
+#define XPS_APM2_INT_ID		(25U + 32U)
+#define XPS_APM5_INT_ID		(123U + 32U)
+
+/* REDEFINES for TEST APP */
+/* Definitions for UART */
+#define XPAR_PS7_UART_0_INTR		XPS_UART0_INT_ID
+#define XPAR_PS7_UART_1_INTR		XPS_UART1_INT_ID
+#define XPAR_PS7_USB_0_INTR		XPS_USB0_INT_ID
+#define XPAR_PS7_USB_1_INTR		XPS_USB1_INT_ID
+#define XPAR_PS7_I2C_0_INTR		XPS_I2C0_INT_ID
+#define XPAR_PS7_I2C_1_INTR		XPS_I2C1_INT_ID
+#define XPAR_PS7_SPI_0_INTR		XPS_SPI0_INT_ID
+#define XPAR_PS7_SPI_1_INTR		XPS_SPI1_INT_ID
+#define XPAR_PS7_CAN_0_INTR		XPS_CAN0_INT_ID
+#define XPAR_PS7_CAN_1_INTR		XPS_CAN1_INT_ID
+#define XPAR_PS7_GPIO_0_INTR		XPS_GPIO_INT_ID
+#define XPAR_PS7_ETHERNET_0_INTR	XPS_GEM0_INT_ID
+#define XPAR_PS7_ETHERNET_0_WAKE_INTR	XPS_GEM0_WAKE_INT_ID
+#define XPAR_PS7_ETHERNET_1_INTR	XPS_GEM1_INT_ID
+#define XPAR_PS7_ETHERNET_1_WAKE_INTR	XPS_GEM1_WAKE_INT_ID
+#define XPAR_PS7_ETHERNET_2_INTR	XPS_GEM2_INT_ID
+#define XPAR_PS7_ETHERNET_2_WAKE_INTR	XPS_GEM2_WAKE_INT_ID
+#define XPAR_PS7_ETHERNET_3_INTR	XPS_GEM3_INT_ID
+#define XPAR_PS7_ETHERNET_3_WAKE_INTR	XPS_GEM3_WAKE_INT_ID
+
+#define XPAR_PS7_QSPI_0_INTR		XPS_QSPI_INT_ID
+#define XPAR_PS7_WDT_0_INTR		XPS_WDT_INT_ID
+#define XPAR_PS7_SCUWDT_0_INTR		XPS_SCU_WDT_INT_ID
+#define XPAR_PS7_SCUTIMER_0_INTR	XPS_SCU_TMR_INT_ID
+#define XPAR_PS7_XADC_0_INTR		XPS_SYSMON_INT_ID
+
+#define XPAR_PSU_UART_0_INTR        XPS_UART0_INT_ID
+#define XPAR_PSU_UART_1_INTR        XPS_UART1_INT_ID
+#define XPAR_PSU_USB_0_INTR     XPS_USB0_INT_ID
+#define XPAR_PSU_USB_1_INTR     XPS_USB1_INT_ID
+#define XPAR_PSU_I2C_0_INTR     XPS_I2C0_INT_ID
+#define XPAR_PSU_I2C_1_INTR     XPS_I2C1_INT_ID
+#define XPAR_PSU_SPI_0_INTR     XPS_SPI0_INT_ID
+#define XPAR_PSU_SPI_1_INTR     XPS_SPI1_INT_ID
+#define XPAR_PSU_CAN_0_INTR     XPS_CAN0_INT_ID
+#define XPAR_PSU_CAN_1_INTR     XPS_CAN1_INT_ID
+#define XPAR_PSU_GPIO_0_INTR        XPS_GPIO_INT_ID
+#define XPAR_PSU_ETHERNET_0_INTR    XPS_GEM0_INT_ID
+#define XPAR_PSU_ETHERNET_0_WAKE_INTR   XPS_GEM0_WAKE_INT_ID
+#define XPAR_PSU_ETHERNET_1_INTR    XPS_GEM1_INT_ID
+#define XPAR_PSU_ETHERNET_1_WAKE_INTR   XPS_GEM1_WAKE_INT_ID
+#define XPAR_PSU_ETHERNET_2_INTR    XPS_GEM2_INT_ID
+#define XPAR_PSU_ETHERNET_2_WAKE_INTR   XPS_GEM2_WAKE_INT_ID
+#define XPAR_PSU_ETHERNET_3_INTR    XPS_GEM3_INT_ID
+#define XPAR_PSU_ETHERNET_3_WAKE_INTR   XPS_GEM3_WAKE_INT_ID
+#define XPAR_PSU_QSPI_0_INTR        XPS_QSPI_INT_ID
+#define XPAR_PSU_WDT_0_INTR     XPS_WDT_INT_ID
+#define XPAR_PSU_SCUWDT_0_INTR      XPS_SCU_WDT_INT_ID
+#define XPAR_PSU_SCUTIMER_0_INTR    XPS_SCU_TMR_INT_ID
+#define XPAR_PSU_XADC_0_INTR        XPS_SYSMON_INT_ID
+#define XPAR_PSU_TTC_0_INTR         XPS_TTC0_0_INT_ID
+#define XPAR_PSU_TTC_1_INTR         XPS_TTC0_1_INT_ID
+#define XPAR_PSU_TTC_2_INTR         XPS_TTC0_2_INT_ID
+#define XPAR_PSU_TTC_3_INTR         XPS_TTC1_0_INT_ID
+#define XPAR_PSU_TTC_4_INTR         XPS_TTC1_1_INT_ID
+#define XPAR_PSU_TTC_5_INTR         XPS_TTC1_2_INT_ID
+#define XPAR_PSU_TTC_6_INTR			XPS_TTC2_0_INT_ID
+#define XPAR_PSU_TTC_7_INTR			XPS_TTC2_1_INT_ID
+#define XPAR_PSU_TTC_8_INTR			XPS_TTC2_2_INT_ID
+#define XPAR_PSU_TTC_9_INTR			XPS_TTC3_0_INT_ID
+#define XPAR_PSU_TTC_10_INTR		XPS_TTC3_1_INT_ID
+#define XPAR_PSU_TTC_11_INTR		XPS_TTC3_2_INT_ID
+
+#define XPAR_XADCPS_NUM_INSTANCES 1U
+#define XPAR_XADCPS_0_DEVICE_ID   0U
+#define XPAR_XADCPS_0_BASEADDR	  (0xF8007000U)
+#define XPAR_XADCPS_INT_ID		XPS_SYSMON_INT_ID
+
+/* For backwards compatibilty */
+#define XPAR_XUARTPS_0_CLOCK_HZ		XPAR_XUARTPS_0_UART_CLK_FREQ_HZ
+#define XPAR_XUARTPS_1_CLOCK_HZ		XPAR_XUARTPS_1_UART_CLK_FREQ_HZ
+#define XPAR_XTTCPS_0_CLOCK_HZ		XPAR_XTTCPS_0_TTC_CLK_FREQ_HZ
+#define XPAR_XTTCPS_1_CLOCK_HZ		XPAR_XTTCPS_1_TTC_CLK_FREQ_HZ
+#define XPAR_XTTCPS_2_CLOCK_HZ		XPAR_XTTCPS_2_TTC_CLK_FREQ_HZ
+#define XPAR_XTTCPS_3_CLOCK_HZ		XPAR_XTTCPS_3_TTC_CLK_FREQ_HZ
+#define XPAR_XTTCPS_4_CLOCK_HZ		XPAR_XTTCPS_4_TTC_CLK_FREQ_HZ
+#define XPAR_XTTCPS_5_CLOCK_HZ		XPAR_XTTCPS_5_TTC_CLK_FREQ_HZ
+#define XPAR_XIICPS_0_CLOCK_HZ		XPAR_XIICPS_0_I2C_CLK_FREQ_HZ
+#define XPAR_XIICPS_1_CLOCK_HZ		XPAR_XIICPS_1_I2C_CLK_FREQ_HZ
+
+#define XPAR_XQSPIPS_0_CLOCK_HZ		XPAR_XQSPIPS_0_QSPI_CLK_FREQ_HZ
+
+#ifdef XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ
+#define XPAR_CPU_CORTEXR5_CORE_CLOCK_FREQ_HZ	XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ
+#endif
+
+#ifdef XPAR_CPU_CORTEXR5_1_CPU_CLK_FREQ_HZ
+#define XPAR_CPU_CORTEXR5_CORE_CLOCK_FREQ_HZ	XPAR_CPU_CORTEXR5_1_CPU_CLK_FREQ_HZ
+#endif
+
+#define XPAR_SCUWDT_DEVICE_ID		0U
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xplatform_info.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xplatform_info.c
new file mode 100644
index 000000000..fea992e40
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xplatform_info.c
@@ -0,0 +1,133 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xplatform_info.c
+*
+* This file contains information about hardware for which the code is built
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date   Changes
+* ----- ---- -------- -------------------------------------------------------
+* 5.00  pkp  12/15/14 Initial release
+* 5.04  pkp  01/12/16 Added platform information support for Cortex-A53 32bit
+*					  mode
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xplatform_info.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+*
+* This API is used to provide information about platform
+*
+* @param    None.
+*
+* @return   The information about platform defined in xplatform_info.h
+*
+* @note     None.
+*
+******************************************************************************/
+u32 XGetPlatform_Info()
+{
+	u32 reg;
+#if defined (ARMR5) || (__aarch64__) || (ARMA53_32)
+	return XPLAT_ZYNQ_ULTRA_MP;
+#elif (__microblaze__)
+	return XPLAT_MICROBLAZE;
+#else
+	return XPLAT_ZYNQ;
+#endif
+}
+
+/*****************************************************************************/
+/**
+*
+* This API is used to provide information about zynq ultrascale MP platform
+*
+* @param    None.
+*
+* @return   The information about zynq ultrascale MP platform defined in
+*			xplatform_info.h
+*
+* @note     None.
+*
+******************************************************************************/
+#if defined (ARMR5) || (__aarch64__) || (ARMA53_32)
+u32 XGet_Zynq_UltraMp_Platform_info()
+{
+	u32 reg;
+	reg = ((Xil_In32(XPAR_CSU_BASEADDR + XPAR_CSU_VER_OFFSET) >> 12U )& XPLAT_INFO_MASK);
+	return reg;
+}
+#endif
+
+/*****************************************************************************/
+/**
+*
+* This API is used to provide information about PS Silicon version
+*
+* @param    None.
+*
+* @return   The information about PS Silicon version.
+*
+* @note     None.
+*
+******************************************************************************/
+#if defined (ARMR5) || (__aarch64__) || (ARMA53_32)
+u32 XGetPSVersion_Info()
+{
+	u32 reg;
+	reg = (Xil_In32(XPAR_CSU_BASEADDR + XPAR_CSU_VER_OFFSET)
+			& XPS_VERSION_INFO_MASK);
+	return reg;
+}
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xplatform_info.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xplatform_info.h
new file mode 100644
index 000000000..7028a83af
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xplatform_info.h
@@ -0,0 +1,91 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xplatform_info.h
+*
+* This file contains definitions for various platforms available
+*
+******************************************************************************/
+
+#ifndef XPLATFORM_INFO_H		/* prevent circular inclusions */
+#define XPLATFORM_INFO_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+
+/************************** Constant Definitions *****************************/
+
+#define XPAR_CSU_BASEADDR 0xFFCA0000U
+#define	XPAR_CSU_VER_OFFSET 0x00000044U
+
+#define XPLAT_ZYNQ_ULTRA_MP_SILICON 0x0
+#define XPLAT_ZYNQ_ULTRA_MP 0x1
+#define XPLAT_ZYNQ_ULTRA_MPVEL 0x2
+#define XPLAT_ZYNQ_ULTRA_MPQEMU 0x3
+#define XPLAT_ZYNQ 0x4
+#define XPLAT_MICROBLAZE 0x5
+
+#define XPS_VERSION_1 0x0
+#define XPS_VERSION_2 0x1
+
+#define XPLAT_INFO_MASK (0xF)
+#define XPS_VERSION_INFO_MASK (0xF)
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+u32 XGetPlatform_Info();
+
+#if defined (ARMR5) || (__aarch64__) || (ARMA53_32)
+u32 XGetPSVersion_Info();
+#endif
+
+#if defined (ARMR5) || (__aarch64__) || (ARMA53_32)
+u32 XGet_Zynq_UltraMp_Platform_info();
+#endif
+/************************** Function Prototypes ******************************/
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpm_counter.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpm_counter.c
new file mode 100644
index 000000000..0851408cc
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpm_counter.c
@@ -0,0 +1,292 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xpm_counter.c
+*
+* This file contains APIs for configuring and controlling the Cortex-R5
+* Performance Monitor Events. For more information about the event counters,
+* see xpm_counter.h.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xpm_counter.h"
+
+/************************** Constant Definitions ****************************/
+
+/**************************** Type Definitions ******************************/
+
+typedef const u32 PmcrEventCfg32[XPM_CTRCOUNT];
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Variable Definitions *****************************/
+
+
+
+/************************** Function Prototypes ******************************/
+
+void Xpm_DisableEventCounters(void);
+void Xpm_EnableEventCounters (void);
+void Xpm_ResetEventCounters (void);
+
+/******************************************************************************/
+
+/****************************************************************************/
+/**
+*
+* This function disables the Cortex R5 event counters.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void Xpm_DisableEventCounters(void)
+{
+	/* Disable the event counters */
+	mtcp(XREG_CP15_COUNT_ENABLE_CLR, 0x3f);
+}
+
+/****************************************************************************/
+/**
+*
+* This function enables the Cortex R5 event counters.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void Xpm_EnableEventCounters(void)
+{
+	/* Enable the event counters */
+	mtcp(XREG_CP15_COUNT_ENABLE_SET, 0x3f);
+}
+
+/****************************************************************************/
+/**
+*
+* This function resets the Cortex R5 event counters.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void Xpm_ResetEventCounters(void)
+{
+	u32 Reg;
+
+#ifdef __GNUC__
+	Reg = mfcp(XREG_CP15_PERF_MONITOR_CTRL);
+#else
+	{ register u32 C15Reg __asm(XREG_CP15_PERF_MONITOR_CTRL);
+	  Reg = C15Reg; }
+#endif
+	Reg |= (1U << 2U); /* reset event counters */
+	mtcp(XREG_CP15_PERF_MONITOR_CTRL, Reg);
+}
+
+/****************************************************************************/
+/**
+*
+* This function configures the Cortex R5 event counters controller, with the
+* event codes, in a configuration selected by the user and enables the counters.
+*
+* @param	PmcrCfg is configuration value based on which the event counters
+*		are configured.
+*		Use XPM_CNTRCFG* values defined in xpm_counter.h.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void Xpm_SetEvents(s32 PmcrCfg)
+{
+	u32 Counter;
+	static PmcrEventCfg32 PmcrEvents[] = {
+		{
+			XPM_EVENT_SOFTINCR,
+			XPM_EVENT_INSRFETCH_CACHEREFILL,
+			XPM_EVENT_INSTRFECT_TLBREFILL,
+			XPM_EVENT_DATA_CACHEREFILL,
+			XPM_EVENT_DATA_CACHEACCESS,
+			XPM_EVENT_DATA_TLBREFILL
+		},
+		{
+			XPM_EVENT_DATA_READS,
+			XPM_EVENT_DATA_WRITE,
+			XPM_EVENT_EXCEPTION,
+			XPM_EVENT_EXCEPRETURN,
+			XPM_EVENT_CHANGECONTEXT,
+			XPM_EVENT_SW_CHANGEPC
+		},
+		{
+			XPM_EVENT_IMMEDBRANCH,
+			XPM_EVENT_UNALIGNEDACCESS,
+			XPM_EVENT_BRANCHMISS,
+			XPM_EVENT_CLOCKCYCLES,
+			XPM_EVENT_BRANCHPREDICT,
+			XPM_EVENT_JAVABYTECODE
+		},
+		{
+			XPM_EVENT_SWJAVABYTECODE,
+			XPM_EVENT_JAVABACKBRANCH,
+			XPM_EVENT_COHERLINEMISS,
+			XPM_EVENT_COHERLINEHIT,
+			XPM_EVENT_INSTRSTALL,
+			XPM_EVENT_DATASTALL
+		},
+		{
+			XPM_EVENT_MAINTLBSTALL,
+			XPM_EVENT_STREXPASS,
+			XPM_EVENT_STREXFAIL,
+			XPM_EVENT_DATAEVICT,
+			XPM_EVENT_NODISPATCH,
+			XPM_EVENT_ISSUEEMPTY
+		},
+		{
+			XPM_EVENT_INSTRRENAME,
+			XPM_EVENT_PREDICTFUNCRET,
+			XPM_EVENT_MAINEXEC,
+			XPM_EVENT_SECEXEC,
+			XPM_EVENT_LDRSTR,
+			XPM_EVENT_FLOATRENAME
+		},
+		{
+			XPM_EVENT_NEONRENAME,
+			XPM_EVENT_PLDSTALL,
+			XPM_EVENT_WRITESTALL,
+			XPM_EVENT_INSTRTLBSTALL,
+			XPM_EVENT_DATATLBSTALL,
+			XPM_EVENT_INSTR_uTLBSTALL
+		},
+		{
+			XPM_EVENT_DATA_uTLBSTALL,
+			XPM_EVENT_DMB_STALL,
+			XPM_EVENT_INT_CLKEN,
+			XPM_EVENT_DE_CLKEN,
+			XPM_EVENT_INSTRISB,
+			XPM_EVENT_INSTRDSB
+		},
+		{
+			XPM_EVENT_INSTRDMB,
+			XPM_EVENT_EXTINT,
+			XPM_EVENT_PLE_LRC,
+			XPM_EVENT_PLE_LRS,
+			XPM_EVENT_PLE_FLUSH,
+			XPM_EVENT_PLE_CMPL
+		},
+		{
+			XPM_EVENT_PLE_OVFL,
+			XPM_EVENT_PLE_PROG,
+			XPM_EVENT_PLE_LRC,
+			XPM_EVENT_PLE_LRS,
+			XPM_EVENT_PLE_FLUSH,
+			XPM_EVENT_PLE_CMPL
+		},
+		{
+			XPM_EVENT_DATASTALL,
+			XPM_EVENT_INSRFETCH_CACHEREFILL,
+			XPM_EVENT_INSTRFECT_TLBREFILL,
+			XPM_EVENT_DATA_CACHEREFILL,
+			XPM_EVENT_DATA_CACHEACCESS,
+			XPM_EVENT_DATA_TLBREFILL
+		},
+	};
+	const u32 *ptr = PmcrEvents[PmcrCfg];
+
+	Xpm_DisableEventCounters();
+
+	for(Counter = 0U; Counter < XPM_CTRCOUNT; Counter++) {
+
+		/* Selecet event counter */
+		mtcp(XREG_CP15_EVENT_CNTR_SEL, Counter);
+
+		/* Set the event */
+		mtcp(XREG_CP15_EVENT_TYPE_SEL, ptr[Counter]);
+	}
+
+	Xpm_ResetEventCounters();
+	Xpm_EnableEventCounters();
+}
+
+/****************************************************************************/
+/**
+*
+* This function disables the event counters and returns the counter values.
+*
+* @param	PmCtrValue is a pointer to an array of type u32 PmCtrValue[6].
+*		It is an output parameter which is used to return the PM
+*		counter values.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void Xpm_GetEventCounters(u32 *PmCtrValue)
+{
+	u32 Counter;
+
+	Xpm_DisableEventCounters();
+
+	for(Counter = 0U; Counter < XPM_CTRCOUNT; Counter++) {
+
+		mtcp(XREG_CP15_EVENT_CNTR_SEL, Counter);
+#ifdef __GNUC__
+		PmCtrValue[Counter] = mfcp(XREG_CP15_PERF_MONITOR_COUNT);
+#else
+		{ register u32 Cp15Reg __asm(XREG_CP15_PERF_MONITOR_COUNT);
+		  PmCtrValue[Counter] = Cp15Reg; }
+#endif
+	}
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpm_counter.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpm_counter.h
new file mode 100644
index 000000000..5679d4bb5
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpm_counter.h
@@ -0,0 +1,571 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xpm_counter.h
+*
+* This header file contains APIs for configuring and controlling the Cortex-R5
+* Performance Monitor Events.
+* Cortex-R5 Performance Monitor has 6 event counters which can be used to
+* count a variety of events described in Coretx-R5 TRM. This file defines
+* configurations, where value configures the event counters to count a
+* set of events.
+*
+* Xpm_SetEvents can be used to set the event counters to count a set of events
+* and Xpm_GetEventCounters can be used to read the counter values.
+*
+* @note
+*
+* This file doesn't handle the Cortex-R5 cycle counter, as the cycle counter is
+* being used for time keeping.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 

+*
+******************************************************************************/
+
+#ifndef XPMCOUNTER_H /* prevent circular inclusions */
+#define XPMCOUNTER_H /* by using protection macros */
+
+/***************************** Include Files ********************************/
+
+#include 
+#include "xpseudo_asm.h"
+#include "xil_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/************************** Constant Definitions ****************************/
+
+/* Number of performance counters */
+#define XPM_CTRCOUNT 6U
+
+/* The following constants define the Cortex-R5 Performance Monitor Events */
+
+/*
+ * Software increment. The register is incremented only on writes to the
+ * Software Increment Register
+ */
+#define XPM_EVENT_SOFTINCR 0x00U
+
+/*
+ * Instruction fetch that causes a refill at (at least) the lowest level(s) of
+ * instruction or unified cache. Includes the speculative linefills in the
+ * count
+ */
+#define XPM_EVENT_INSRFETCH_CACHEREFILL 0x01U
+
+/*
+ * Instruction fetch that causes a TLB refill at (at least) the lowest level of
+ * TLB. Includes the speculative requests in the count
+ */
+#define XPM_EVENT_INSTRFECT_TLBREFILL 0x02U
+
+/*
+ * Data read or write operation that causes a refill at (at least) the lowest
+ * level(s)of data or unified cache. Counts the number of allocations performed
+ * in the Data Cache due to a read or a write
+ */
+#define XPM_EVENT_DATA_CACHEREFILL 0x03U
+
+/*
+ * Data read or write operation that causes a cache access at (at least) the
+ * lowest level(s) of data or unified cache. This includes speculative reads
+ */
+#define XPM_EVENT_DATA_CACHEACCESS 0x04U
+
+/*
+ * Data read or write operation that causes a TLB refill at (at least) the
+ * lowest level of TLB. This does not include micro TLB misses due to PLD, PLI,
+ * CP15 Cache operation by MVA and CP15 VA to PA operations
+ */
+#define XPM_EVENT_DATA_TLBREFILL 0x05U
+
+/*
+ * Data read architecturally executed. Counts the number of data read
+ * instructions accepted by the Load Store Unit. This includes counting the
+ * speculative and aborted LDR/LDM, as well as the reads due to the SWP
+ * instructions
+ */
+#define XPM_EVENT_DATA_READS 0x06U
+
+/*
+ * Data write architecturally executed. Counts the number of data write
+ * instructions accepted by the Load Store Unit. This includes counting the
+ * speculative and aborted STR/STM, as well as the writes due to the SWP
+ * instructions
+ */
+#define XPM_EVENT_DATA_WRITE 0x07U
+
+/* Exception taken. Counts the number of exceptions architecturally taken.*/
+#define XPM_EVENT_EXCEPTION 0x09U
+
+/* Exception return architecturally executed.*/
+#define XPM_EVENT_EXCEPRETURN 0x0AU
+
+/*
+ * Change to ContextID retired. Counts the number of instructions
+ * architecturally executed writing into the ContextID Register
+ */
+#define XPM_EVENT_CHANGECONTEXT 0x0BU
+
+/*
+ * Software change of PC, except by an exception, architecturally executed.
+ * Count the number of PC changes architecturally executed, excluding the PC
+ * changes due to taken exceptions
+ */
+#define XPM_EVENT_SW_CHANGEPC 0x0CU
+
+/*
+ * Immediate branch architecturally executed (taken or not taken). This includes
+ * the branches which are flushed due to a previous load/store which aborts
+ * late
+ */
+#define XPM_EVENT_IMMEDBRANCH 0x0DU
+
+/*
+ * Unaligned access architecturally executed. Counts the number of aborted
+ * unaligned accessed architecturally executed, and the number of not-aborted
+ * unaligned accesses, including the speculative ones
+ */
+#define XPM_EVENT_UNALIGNEDACCESS 0x0FU
+
+/*
+ * Branch mispredicted/not predicted. Counts the number of mispredicted or
+ * not-predicted branches executed. This includes the branches which are flushed
+ * due to a previous load/store which aborts late
+ */
+#define XPM_EVENT_BRANCHMISS 0x10U
+
+/*
+ * Counts clock cycles when the Cortex-R5 processor is not in WFE/WFI. This
+ * event is not exported on the PMUEVENT bus
+ */
+#define XPM_EVENT_CLOCKCYCLES 0x11U
+
+/*
+ * Branches or other change in program flow that could have been predicted by
+ * the branch prediction resources of the processor. This includes the branches
+ * which are flushed due to a previous load/store which aborts late
+ */
+#define XPM_EVENT_BRANCHPREDICT 0x12U
+
+/*
+ * Java bytecode execute. Counts the number of Java bytecodes being decoded,
+ * including speculative ones
+ */
+#define XPM_EVENT_JAVABYTECODE 0x40U
+
+/*
+ * Software Java bytecode executed. Counts the number of software java bytecodes
+ * being decoded, including speculative ones
+ */
+#define XPM_EVENT_SWJAVABYTECODE 0x41U
+
+/*
+ * Jazelle backward branches executed. Counts the number of Jazelle taken
+ * branches being executed. This includes the branches which are flushed due
+ * to a previous load/store which aborts late
+ */
+#define XPM_EVENT_JAVABACKBRANCH 0x42U
+
+/*
+ * Coherent linefill miss Counts the number of coherent linefill requests
+ * performed by the Cortex-R5 processor which also miss in all the other
+ * Cortex-R5 processors, meaning that the request is sent to the external
+ * memory
+ */
+#define XPM_EVENT_COHERLINEMISS 0x50U
+
+/*
+ * Coherent linefill hit. Counts the number of coherent linefill requests
+ * performed by the Cortex-R5 processor which hit in another Cortex-R5
+ * processor, meaning that the linefill data is fetched directly from the
+ * relevant Cortex-R5 cache
+ */
+#define XPM_EVENT_COHERLINEHIT 0x51U
+
+/*
+ * Instruction cache dependent stall cycles. Counts the number of cycles where
+ * the processor is ready to accept new instructions, but does not receive any
+ * due to the instruction side not being able to provide any and the
+ * instruction cache is currently performing at least one linefill
+ */
+#define XPM_EVENT_INSTRSTALL 0x60U
+
+/*
+ * Data cache dependent stall cycles. Counts the number of cycles where the core
+ * has some instructions that it cannot issue to any pipeline, and the Load
+ * Store unit has at least one pending linefill request, and no pending
+ */
+#define XPM_EVENT_DATASTALL 0x61U
+
+/*
+ * Main TLB miss stall cycles. Counts the number of cycles where the processor
+ * is stalled waiting for the completion of translation table walks from the
+ * main TLB. The processor stalls can be due to the instruction side not being
+ * able to provide the instructions, or to the data side not being able to
+ * provide the necessary data, due to them waiting for the main TLB translation
+ * table walk to complete
+ */
+#define XPM_EVENT_MAINTLBSTALL 0x62U
+
+/*
+ * Counts the number of STREX instructions architecturally executed and
+ * passed
+ */
+#define XPM_EVENT_STREXPASS 0x63U
+
+/*
+ * Counts the number of STREX instructions architecturally executed and
+ * failed
+ */
+#define XPM_EVENT_STREXFAIL 0x64U
+
+/*
+ * Data eviction. Counts the number of eviction requests due to a linefill in
+ * the data cache
+ */
+#define XPM_EVENT_DATAEVICT 0x65U
+
+/*
+ * Counts the number of cycles where the issue stage does not dispatch any
+ * instruction because it is empty or cannot dispatch any instructions
+ */
+#define XPM_EVENT_NODISPATCH 0x66U
+
+/*
+ * Counts the number of cycles where the issue stage is empty
+ */
+#define XPM_EVENT_ISSUEEMPTY 0x67U
+
+/*
+ * Counts the number of instructions going through the Register Renaming stage.
+ * This number is an approximate number of the total number of instructions
+ * speculatively executed, and even more approximate of the total number of
+ * instructions architecturally executed. The approximation depends mainly on
+ * the branch misprediction rate.
+ * The renaming stage can handle two instructions in the same cycle so the event
+ * is two bits long:
+ *    - b00 no instructions renamed
+ *    - b01 one instruction renamed
+ *    - b10 two instructions renamed
+ */
+#define XPM_EVENT_INSTRRENAME 0x68U
+
+/*
+ * Counts the number of procedure returns whose condition codes do not fail,
+ * excluding all returns from exception. This count includes procedure returns
+ * which are flushed due to a previous load/store which aborts late.
+ * Only the following instructions are reported:
+ * - BX R14
+ * - MOV PC LR
+ * - POP {..,pc}
+ * - LDR pc,[sp],#offset
+ * The following instructions are not reported:
+ * - LDMIA R9!,{..,PC} (ThumbEE state only)
+ * - LDR PC,[R9],#offset (ThumbEE state only)
+ * - BX R0 (Rm != R14)
+ * - MOV PC,R0 (Rm != R14)
+ * - LDM SP,{...,PC} (writeback not specified)
+ * - LDR PC,[SP,#offset] (wrong addressing mode)
+ */
+#define XPM_EVENT_PREDICTFUNCRET 0x6EU
+
+/*
+ * Counts the number of instructions being executed in the main execution
+ * pipeline of the processor, the multiply pipeline and arithmetic logic unit
+ * pipeline. The counted instructions are still speculative
+ */
+#define XPM_EVENT_MAINEXEC 0x70U
+
+/*
+ * Counts the number of instructions being executed in the processor second
+ * execution pipeline (ALU). The counted instructions are still speculative
+ */
+#define XPM_EVENT_SECEXEC 0x71U
+
+/*
+ * Counts the number of instructions being executed in the Load/Store unit. The
+ * counted instructions are still speculative
+ */
+#define XPM_EVENT_LDRSTR 0x72U
+
+/*
+ * Counts the number of Floating-point instructions going through the Register
+ * Rename stage. Instructions are still speculative in this stage.
+ *Two floating-point instructions can be renamed in the same cycle so the event
+ * is two bitslong:
+ *0b00 no floating-point instruction renamed
+ *0b01 one floating-point instruction renamed
+ *0b10 two floating-point instructions renamed
+ */
+#define XPM_EVENT_FLOATRENAME 0x73U
+
+/*
+ * Counts the number of Neon instructions going through the Register Rename
+ * stage.Instructions are still speculative in this stage.
+ * Two NEON instructions can be renamed in the same cycle so the event is two
+ * bits long:
+ *0b00 no NEON instruction renamed
+ *0b01 one NEON instruction renamed
+ *0b10 two NEON instructions renamed
+ */
+#define XPM_EVENT_NEONRENAME 0x74U
+
+/*
+ * Counts the number of cycles where the processor is stalled because PLD slots
+ * are all full
+ */
+#define XPM_EVENT_PLDSTALL 0x80U
+
+/*
+ * Counts the number of cycles when the processor is stalled and the data side
+ * is stalled too because it is full and executing writes to the external
+ * memory
+ */
+#define XPM_EVENT_WRITESTALL 0x81U
+
+/*
+ * Counts the number of stall cycles due to main TLB misses on requests issued
+ * by the instruction side
+ */
+#define XPM_EVENT_INSTRTLBSTALL 0x82U
+
+/*
+ * Counts the number of stall cycles due to main TLB misses on requests issued
+ * by the data side
+ */
+#define XPM_EVENT_DATATLBSTALL 0x83U
+
+/*
+ * Counts the number of stall cycles due to micro TLB misses on the instruction
+ * side. This event does not include main TLB miss stall cycles that are already
+ * counted in the corresponding main TLB event
+ */
+#define XPM_EVENT_INSTR_uTLBSTALL 0x84U
+
+/*
+ * Counts the number of stall cycles due to micro TLB misses on the data side.
+ * This event does not include main TLB miss stall cycles that are already
+ * counted in the corresponding main TLB event
+ */
+#define XPM_EVENT_DATA_uTLBSTALL 0x85U
+
+/*
+ * Counts the number of stall cycles because of the execution of a DMB memory
+ * barrier. This includes all DMB instructions being executed, even
+ * speculatively
+ */
+#define XPM_EVENT_DMB_STALL 0x86U
+
+/*
+ * Counts the number of cycles during which the integer core clock is enabled
+ */
+#define XPM_EVENT_INT_CLKEN 0x8AU
+
+/*
+ * Counts the number of cycles during which the Data Engine clock is enabled
+ */
+#define XPM_EVENT_DE_CLKEN 0x8BU
+
+/*
+ * Counts the number of ISB instructions architecturally executed
+ */
+#define XPM_EVENT_INSTRISB 0x90U
+
+/*
+ * Counts the number of DSB instructions architecturally executed
+ */
+#define XPM_EVENT_INSTRDSB 0x91U
+
+/*
+ * Counts the number of DMB instructions speculatively executed
+ */
+#define XPM_EVENT_INSTRDMB 0x92U
+
+/*
+ * Counts the number of external interrupts executed by the processor
+ */
+#define XPM_EVENT_EXTINT 0x93U
+
+/*
+ * PLE cache line request completed
+ */
+#define XPM_EVENT_PLE_LRC 0xA0U
+
+/*
+ * PLE cache line request skipped
+ */
+#define XPM_EVENT_PLE_LRS 0xA1U
+
+/*
+ * PLE FIFO flush
+ */
+#define XPM_EVENT_PLE_FLUSH 0xA2U
+
+/*
+ * PLE request complete
+ */
+#define XPM_EVENT_PLE_CMPL 0xA3U
+
+/*
+ * PLE FIFO overflow
+ */
+#define XPM_EVENT_PLE_OVFL 0xA4U
+
+/*
+ * PLE request programmed
+ */
+#define XPM_EVENT_PLE_PROG 0xA5U
+
+/*
+ * The following constants define the configurations for Cortex-R5 Performance
+ * Monitor Events. Each configuration configures the event counters for a set
+ * of events.
+ * -----------------------------------------------
+ * Config		PmCtr0... PmCtr5
+ * -----------------------------------------------
+ * XPM_CNTRCFG1		{ XPM_EVENT_SOFTINCR,
+ *			  XPM_EVENT_INSRFETCH_CACHEREFILL,
+ *			  XPM_EVENT_INSTRFECT_TLBREFILL,
+ *			  XPM_EVENT_DATA_CACHEREFILL,
+ *			  XPM_EVENT_DATA_CACHEACCESS,
+ *			  XPM_EVENT_DATA_TLBREFILL }
+ *
+ * XPM_CNTRCFG2		{ XPM_EVENT_DATA_READS,
+ *			  XPM_EVENT_DATA_WRITE,
+ *			  XPM_EVENT_EXCEPTION,
+ *			  XPM_EVENT_EXCEPRETURN,
+ *			  XPM_EVENT_CHANGECONTEXT,
+ *			  XPM_EVENT_SW_CHANGEPC }
+ *
+ * XPM_CNTRCFG3		{ XPM_EVENT_IMMEDBRANCH,
+ *			  XPM_EVENT_UNALIGNEDACCESS,
+ *			  XPM_EVENT_BRANCHMISS,
+ *			  XPM_EVENT_CLOCKCYCLES,
+ *			  XPM_EVENT_BRANCHPREDICT,
+ *			  XPM_EVENT_JAVABYTECODE }
+ *
+ * XPM_CNTRCFG4		{ XPM_EVENT_SWJAVABYTECODE,
+ *			  XPM_EVENT_JAVABACKBRANCH,
+ *			  XPM_EVENT_COHERLINEMISS,
+ *			  XPM_EVENT_COHERLINEHIT,
+ *			  XPM_EVENT_INSTRSTALL,
+ *			  XPM_EVENT_DATASTALL }
+ *
+ * XPM_CNTRCFG5		{ XPM_EVENT_MAINTLBSTALL,
+ *			  XPM_EVENT_STREXPASS,
+ *			  XPM_EVENT_STREXFAIL,
+ *			  XPM_EVENT_DATAEVICT,
+ *			  XPM_EVENT_NODISPATCH,
+ *			  XPM_EVENT_ISSUEEMPTY }
+ *
+ * XPM_CNTRCFG6		{ XPM_EVENT_INSTRRENAME,
+ *			  XPM_EVENT_PREDICTFUNCRET,
+ *			  XPM_EVENT_MAINEXEC,
+ *			  XPM_EVENT_SECEXEC,
+ *			  XPM_EVENT_LDRSTR,
+ *			  XPM_EVENT_FLOATRENAME }
+ *
+ * XPM_CNTRCFG7		{ XPM_EVENT_NEONRENAME,
+ *			  XPM_EVENT_PLDSTALL,
+ *			  XPM_EVENT_WRITESTALL,
+ *			  XPM_EVENT_INSTRTLBSTALL,
+ *			  XPM_EVENT_DATATLBSTALL,
+ *			  XPM_EVENT_INSTR_uTLBSTALL }
+ *
+ * XPM_CNTRCFG8		{ XPM_EVENT_DATA_uTLBSTALL,
+ *			  XPM_EVENT_DMB_STALL,
+ *			  XPM_EVENT_INT_CLKEN,
+ *			  XPM_EVENT_DE_CLKEN,
+ *			  XPM_EVENT_INSTRISB,
+ *			  XPM_EVENT_INSTRDSB }
+ *
+ * XPM_CNTRCFG9		{ XPM_EVENT_INSTRDMB,
+ *			  XPM_EVENT_EXTINT,
+ *			  XPM_EVENT_PLE_LRC,
+ *			  XPM_EVENT_PLE_LRS,
+ *			  XPM_EVENT_PLE_FLUSH,
+ *			  XPM_EVENT_PLE_CMPL }
+ *
+ * XPM_CNTRCFG10	{ XPM_EVENT_PLE_OVFL,
+ *			  XPM_EVENT_PLE_PROG,
+ *			  XPM_EVENT_PLE_LRC,
+ *			  XPM_EVENT_PLE_LRS,
+ *			  XPM_EVENT_PLE_FLUSH,
+ *			  XPM_EVENT_PLE_CMPL }
+ *
+ * XPM_CNTRCFG11	{ XPM_EVENT_DATASTALL,
+ *			  XPM_EVENT_INSRFETCH_CACHEREFILL,
+ *			  XPM_EVENT_INSTRFECT_TLBREFILL,
+ *			  XPM_EVENT_DATA_CACHEREFILL,
+ *			  XPM_EVENT_DATA_CACHEACCESS,
+ *			  XPM_EVENT_DATA_TLBREFILL }
+ */
+#define XPM_CNTRCFG1	0
+#define XPM_CNTRCFG2	1
+#define XPM_CNTRCFG3	2
+#define XPM_CNTRCFG4	3
+#define XPM_CNTRCFG5	4
+#define XPM_CNTRCFG6	5
+#define XPM_CNTRCFG7	6
+#define XPM_CNTRCFG8	7
+#define XPM_CNTRCFG9	8
+#define XPM_CNTRCFG10	9
+#define XPM_CNTRCFG11	10
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Variable Definitions ****************************/
+
+/************************** Function Prototypes *****************************/
+
+/* Interface fuctions to access perfromance counters from abstraction layer */
+void Xpm_SetEvents(s32 PmcrCfg);
+void Xpm_GetEventCounters(u32 *PmCtrValue);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpseudo_asm.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpseudo_asm.h
new file mode 100644
index 000000000..aff19d5a9
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpseudo_asm.h
@@ -0,0 +1,54 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xpseudo_asm.h
+*
+* This header file contains macros for using inline assembler code.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 

+*
+******************************************************************************/
+#ifndef XPSEUDO_ASM_H /* prevent circular inclusions */
+#define XPSEUDO_ASM_H /* by using protection macros */
+
+#include "xreg_cortexr5.h"
+#include "xpseudo_asm_gcc.h"
+
+#endif /* XPSEUDO_ASM_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpseudo_asm_gcc.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpseudo_asm_gcc.h
new file mode 100644
index 000000000..2b382acb8
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xpseudo_asm_gcc.h
@@ -0,0 +1,175 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xpseudo_asm_gcc.h
+*
+* This header file contains macros for using inline assembler code. It is
+* written specifically for the GNU compiler.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00 	pkp  	 05/29/14 First release
+* 

+*
+******************************************************************************/
+
+#ifndef XPSEUDO_ASM_GCC_H  /* prevent circular inclusions */
+#define XPSEUDO_ASM_GCC_H  /* by using protection macros */
+
+/***************************** Include Files ********************************/
+
+#include "xil_types.h"
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/************************** Constant Definitions ****************************/
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/* necessary for pre-processor */
+#define stringify(s)	tostring(s)
+#define tostring(s)	#s
+
+/* pseudo assembler instructions */
+#define mfcpsr()	({u32 rval; \
+			  __asm__ __volatile__(\
+			    "mrs	%0, cpsr\n"\
+			    : "=r" (rval)\
+			  );\
+			  rval;\
+			 })
+
+#define mtcpsr(v)	__asm__ __volatile__(\
+			  "msr	cpsr,%0\n"\
+			  : : "r" (v)\
+			)
+
+#define cpsiei()	__asm__ __volatile__("cpsie	i\n")
+#define cpsidi()	__asm__ __volatile__("cpsid	i\n")
+
+#define cpsief()	__asm__ __volatile__("cpsie	f\n")
+#define cpsidf()	__asm__ __volatile__("cpsid	f\n")
+
+
+
+#define mtgpr(rn, v)	__asm__ __volatile__(\
+			  "mov r" stringify(rn) ", %0 \n"\
+			  : : "r" (v)\
+			)
+
+#define mfgpr(rn)	({u32 rval; \
+			  __asm__ __volatile__(\
+			    "mov %0,r" stringify(rn) "\n"\
+			    : "=r" (rval)\
+			  );\
+			  rval;\
+			 })
+
+/* memory synchronization operations */
+
+/* Instruction Synchronization Barrier */
+#define isb() __asm__ __volatile__ ("isb" : : : "memory")
+
+/* Data Synchronization Barrier */
+#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
+
+/* Data Memory Barrier */
+#define dmb() __asm__ __volatile__ ("dmb" : : : "memory")
+
+
+/* Memory Operations */
+#define ldr(adr)	({u32 rval; \
+			  __asm__ __volatile__(\
+			    "ldr	%0,[%1]"\
+			    : "=r" (rval) : "r" (adr)\
+			  );\
+			  rval;\
+			 })
+
+#define ldrb(adr)	({u8 rval; \
+			  __asm__ __volatile__(\
+			    "ldrb	%0,[%1]"\
+			    : "=r" (rval) : "r" (adr)\
+			  );\
+			  rval;\
+			 })
+
+#define str(adr, val)	__asm__ __volatile__(\
+			  "str	%0,[%1]\n"\
+			  : : "r" (val), "r" (adr)\
+			)
+
+#define strb(adr, val)	__asm__ __volatile__(\
+			  "strb	%0,[%1]\n"\
+			  : : "r" (val), "r" (adr)\
+			)
+
+/* Count leading zeroes (clz) */
+#define clz(arg)	({u8 rval; \
+			  __asm__ __volatile__(\
+			    "clz	%0,%1"\
+			    : "=r" (rval) : "r" (arg)\
+			  );\
+			  rval;\
+			 })
+
+/* CP15 operations */
+#define mtcp(rn, v)	__asm__ __volatile__(\
+			 "mcr " rn "\n"\
+			 : : "r" (v)\
+			);
+
+#define mfcp(rn)	({u32 rval; \
+			 __asm__ __volatile__(\
+			   "mrc " rn "\n"\
+			   : "=r" (rval)\
+			 );\
+			 rval;\
+			 })
+
+/************************** Variable Definitions ****************************/
+
+/************************** Function Prototypes *****************************/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XPSEUDO_ASM_GCC_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xreg_cortexr5.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xreg_cortexr5.h
new file mode 100644
index 000000000..9d28c0acb
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xreg_cortexr5.h
@@ -0,0 +1,445 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xreg_cortexr5.h
+*
+* This header file contains definitions for using inline assembler code. It is
+* written specifically for the GNU, IAR, ARMCC compiler.
+*
+* All of the ARM Cortex R5 GPRs, SPRs, and Debug Registers are defined along
+* with the positions of the bits within the registers.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who      Date     Changes
+* ----- -------- -------- -----------------------------------------------
+* 5.00  pkp  02/10/14 Initial version
+* 

+*
+******************************************************************************/
+#ifndef XREG_CORTEXR5_H	/* prevent circular inclusions */
+#define XREG_CORTEXR5_H	/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* GPRs */
+#define XREG_GPR0				r0
+#define XREG_GPR1				r1
+#define XREG_GPR2				r2
+#define XREG_GPR3				r3
+#define XREG_GPR4				r4
+#define XREG_GPR5				r5
+#define XREG_GPR6				r6
+#define XREG_GPR7				r7
+#define XREG_GPR8				r8
+#define XREG_GPR9				r9
+#define XREG_GPR10				r10
+#define XREG_GPR11				r11
+#define XREG_GPR12				r12
+#define XREG_GPR13				r13
+#define XREG_GPR14				r14
+#define XREG_GPR15				r15
+#define XREG_CPSR				cpsr
+
+/* Coprocessor number defines */
+#define XREG_CP0				0
+#define XREG_CP1				1
+#define XREG_CP2				2
+#define XREG_CP3				3
+#define XREG_CP4				4
+#define XREG_CP5				5
+#define XREG_CP6				6
+#define XREG_CP7				7
+#define XREG_CP8				8
+#define XREG_CP9				9
+#define XREG_CP10				10
+#define XREG_CP11				11
+#define XREG_CP12				12
+#define XREG_CP13				13
+#define XREG_CP14				14
+#define XREG_CP15				15
+
+/* Coprocessor control register defines */
+#define XREG_CR0				cr0
+#define XREG_CR1				cr1
+#define XREG_CR2				cr2
+#define XREG_CR3				cr3
+#define XREG_CR4				cr4
+#define XREG_CR5				cr5
+#define XREG_CR6				cr6
+#define XREG_CR7				cr7
+#define XREG_CR8				cr8
+#define XREG_CR9				cr9
+#define XREG_CR10				cr10
+#define XREG_CR11				cr11
+#define XREG_CR12				cr12
+#define XREG_CR13				cr13
+#define XREG_CR14				cr14
+#define XREG_CR15				cr15
+
+/* Current Processor Status Register (CPSR) Bits */
+#define XREG_CPSR_THUMB_MODE			0x20U
+#define XREG_CPSR_MODE_BITS			0x1FU
+#define XREG_CPSR_SYSTEM_MODE			0x1FU
+#define XREG_CPSR_UNDEFINED_MODE		0x1BU
+#define XREG_CPSR_DATA_ABORT_MODE		0x17U
+#define XREG_CPSR_SVC_MODE			0x13U
+#define XREG_CPSR_IRQ_MODE			0x12U
+#define XREG_CPSR_FIQ_MODE			0x11U
+#define XREG_CPSR_USER_MODE			0x10U
+
+#define XREG_CPSR_IRQ_ENABLE			0x80U
+#define XREG_CPSR_FIQ_ENABLE			0x40U
+
+#define XREG_CPSR_N_BIT				0x80000000U
+#define XREG_CPSR_Z_BIT				0x40000000U
+#define XREG_CPSR_C_BIT				0x20000000U
+#define XREG_CPSR_V_BIT				0x10000000U
+
+/*MPU region definitions*/
+#define REGION_32B     0x00000004U
+#define REGION_64B     0x00000005U
+#define REGION_128B    0x00000006U
+#define REGION_256B    0x00000007U
+#define REGION_512B    0x00000008U
+#define REGION_1K      0x00000009U
+#define REGION_2K      0x0000000AU
+#define REGION_4K      0x0000000BU
+#define REGION_8K      0x0000000CU
+#define REGION_16K     0x0000000DU
+#define REGION_32K     0x0000000EU
+#define REGION_64K     0x0000000FU
+#define REGION_128K    0x00000010U
+#define REGION_256K    0x00000011U
+#define REGION_512K    0x00000012U
+#define REGION_1M      0x00000013U
+#define REGION_2M      0x00000014U
+#define REGION_4M      0x00000015U
+#define REGION_8M      0x00000016U
+#define REGION_16M     0x00000017U
+#define REGION_32M     0x00000018U
+#define REGION_64M     0x00000019U
+#define REGION_128M    0x0000001AU
+#define REGION_256M    0x0000001BU
+#define REGION_512M    0x0000001CU
+#define REGION_1G      0x0000001DU
+#define REGION_2G      0x0000001EU
+#define REGION_4G      0x0000001FU
+
+#define REGION_EN  0x00000001U
+
+
+
+#define SHAREABLE				0x00000004U 	/*shareable */
+#define STRONG_ORDERD_SHARED	0x00000000U	/*strongly ordered, always shareable*/
+
+#define DEVICE_SHARED			0x00000001U	/*device, shareable*/
+#define DEVICE_NONSHARED		0x00000010U	/*device, non shareable*/
+
+#define NORM_NSHARED_WT_NWA		0x00000002U 	/*Outer and Inner write-through, no write-allocate non-shareable*/
+#define NORM_SHARED_WT_NWA		0x00000006U 	/*Outer and Inner write-through, no write-allocate shareable*/
+
+#define NORM_NSHARED_WB_NWA 	0x00000003U 	/*Outer and Inner write-back, no write-allocate non shareable*/
+#define NORM_SHARED_WB_NWA 		0x00000007U 	/*Outer and Inner write-back, no write-allocate shareable*/
+
+#define NORM_NSHARED_NCACHE 	0x00000008U 	/*Outer and Inner Non cacheable  non shareable*/
+#define NORM_SHARED_NCACHE 		0x0000000CU 	/*Outer and Inner Non cacheable shareable*/
+
+#define NORM_NSHARED_WB_WA 		0x0000000BU 	/*Outer and Inner write-back non shared*/
+#define NORM_SHARED_WB_WA 		0x0000000FU 	/*Outer and Inner write-back shared*/
+
+/* inner and outer cache policies can be combined for different combinations */
+
+#define NORM_IN_POLICY_NCACHE	0x00000020U	/*inner non cacheable*/
+#define NORM_IN_POLICY_WB_WA	0x00000021U	/*inner write back write allocate*/
+#define NORM_IN_POLICY_WT_NWA	0x00000022U	/*inner write through no write allocate*/
+#define NORM_IN_POLICY_WB_NWA	0x00000023U	/*inner write back no write allocate*/
+
+#define NORM_OUT_POLICY_NCACHE	0x00000020U	/*outer non cacheable*/
+#define NORM_OUT_POLICY_WB_WA	0x00000028U	/*outer write back write allocate*/
+#define NORM_OUT_POLICY_WT_NWA	0x00000030U	/*outer write through no write allocate*/
+#define NORM_OUT_POLICY_WB_NWA	0x00000038U	/*outer write back no write allocate*/
+
+#define NO_ACCESS				(0x00000000U<<8U)	/*No access*/
+#define PRIV_RW_USER_NA			(0x00000001U<<8U) /*Privileged access only*/
+#define PRIV_RW_USER_RO			(0x00000002U<<8U) /*Writes in User mode generate permission faults*/
+#define	PRIV_RW_USER_RW			(0x00000003U<<8U)	/*Full Access*/
+#define PRIV_RO_USER_NA			(0x00000005U<<8U) /*Privileged eead only*/
+#define PRIV_RO_USER_RO			(0x00000006U<<8U) /*Privileged/User read-only*/
+
+#define EXECUTE_NEVER  			(0x00000001U<<12U)  /* Bit 12*/
+
+
+/* CP15 defines */
+
+/* C0 Register defines */
+#define XREG_CP15_MAIN_ID			"p15, 0, %0,  c0,  c0, 0"
+#define XREG_CP15_CACHE_TYPE			"p15, 0, %0,  c0,  c0, 1"
+#define XREG_CP15_TCM_TYPE			"p15, 0, %0,  c0,  c0, 2"
+#define XREG_CP15_TLB_TYPE			"p15, 0, %0,  c0,  c0, 3"
+#define XREG_CP15_MPU_TYPE			"p15, 0, %0,  c0,  c0, 4"
+#define XREG_CP15_MULTI_PROC_AFFINITY		"p15, 0, %0,  c0,  c0, 5"
+
+#define XREG_CP15_PROC_FEATURE_0		"p15, 0, %0,  c0,  c1, 0"
+#define XREG_CP15_PROC_FEATURE_1		"p15, 0, %0,  c0,  c1, 1"
+#define XREG_CP15_DEBUG_FEATURE_0		"p15, 0, %0,  c0,  c1, 2"
+#define XREG_CP15_MEMORY_FEATURE_0		"p15, 0, %0,  c0,  c1, 4"
+#define XREG_CP15_MEMORY_FEATURE_1		"p15, 0, %0,  c0,  c1, 5"
+#define XREG_CP15_MEMORY_FEATURE_2		"p15, 0, %0,  c0,  c1, 6"
+#define XREG_CP15_MEMORY_FEATURE_3		"p15, 0, %0,  c0,  c1, 7"
+
+#define XREG_CP15_INST_FEATURE_0		"p15, 0, %0,  c0,  c2, 0"
+#define XREG_CP15_INST_FEATURE_1		"p15, 0, %0,  c0,  c2, 1"
+#define XREG_CP15_INST_FEATURE_2		"p15, 0, %0,  c0,  c2, 2"
+#define XREG_CP15_INST_FEATURE_3		"p15, 0, %0,  c0,  c2, 3"
+#define XREG_CP15_INST_FEATURE_4		"p15, 0, %0,  c0,  c2, 4"
+#define XREG_CP15_INST_FEATURE_5		"p15, 0, %0,  c0,  c2, 5"
+
+#define XREG_CP15_CACHE_SIZE_ID			"p15, 1, %0,  c0,  c0, 0"
+#define XREG_CP15_CACHE_LEVEL_ID		"p15, 1, %0,  c0,  c0, 1"
+#define XREG_CP15_AUXILARY_ID			"p15, 1, %0,  c0,  c0, 7"
+
+#define XREG_CP15_CACHE_SIZE_SEL		"p15, 2, %0,  c0,  c0, 0"
+
+/* C1 Register Defines */
+#define XREG_CP15_SYS_CONTROL			"p15, 0, %0,  c1,  c0, 0"
+#define XREG_CP15_AUX_CONTROL			"p15, 0, %0,  c1,  c0, 1"
+#define XREG_CP15_CP_ACCESS_CONTROL		"p15, 0, %0,  c1,  c0, 2"
+
+
+/* XREG_CP15_CONTROL bit defines */
+#define XREG_CP15_CONTROL_TE_BIT		0x40000000U
+#define XREG_CP15_CONTROL_AFE_BIT		0x20000000U
+#define XREG_CP15_CONTROL_TRE_BIT		0x10000000U
+#define XREG_CP15_CONTROL_NMFI_BIT		0x08000000U
+#define XREG_CP15_CONTROL_EE_BIT		0x02000000U
+#define XREG_CP15_CONTROL_HA_BIT		0x00020000U
+#define XREG_CP15_CONTROL_RR_BIT		0x00004000U
+#define XREG_CP15_CONTROL_V_BIT			0x00002000U
+#define XREG_CP15_CONTROL_I_BIT			0x00001000U
+#define XREG_CP15_CONTROL_Z_BIT			0x00000800U
+#define XREG_CP15_CONTROL_SW_BIT		0x00000400U
+#define XREG_CP15_CONTROL_B_BIT			0x00000080U
+#define XREG_CP15_CONTROL_C_BIT			0x00000004U
+#define XREG_CP15_CONTROL_A_BIT			0x00000002U
+#define XREG_CP15_CONTROL_M_BIT			0x00000001U
+/* C2 Register Defines */
+/* Not Used */
+
+/* C3 Register Defines */
+/* Not Used */
+
+/* C4 Register Defines */
+/* Not Used */
+
+/* C5 Register Defines */
+#define XREG_CP15_DATA_FAULT_STATUS		"p15, 0, %0,  c5,  c0, 0"
+#define XREG_CP15_INST_FAULT_STATUS		"p15, 0, %0,  c5,  c0, 1"
+
+#define XREG_CP15_AUX_DATA_FAULT_STATUS		"p15, 0, %0,  c5,  c1, 0"
+#define XREG_CP15_AUX_INST_FAULT_STATUS		"p15, 0, %0,  c5,  c1, 1"
+
+/* C6 Register Defines */
+#define XREG_CP15_DATA_FAULT_ADDRESS		"p15, 0, %0,  c6,  c0, 0"
+#define XREG_CP15_INST_FAULT_ADDRESS		"p15, 0, %0,  c6,  c0, 2"
+
+#define XREG_CP15_MPU_REG_BASEADDR			"p15, 0, %0,  c6,  c1, 0"
+#define XREG_CP15_MPU_REG_SIZE_EN			"p15, 0, %0,  c6,  c1, 2"
+#define XREG_CP15_MPU_REG_ACCESS_CTRL		"p15, 0, %0,  c6,  c1, 4"
+
+#define XREG_CP15_MPU_MEMORY_REG_NUMBER			"p15, 0, %0,  c6,  c2, 0"
+
+/* C7 Register Defines */
+#define XREG_CP15_NOP				"p15, 0, %0,  c7,  c0, 4"
+
+#define XREG_CP15_INVAL_IC_POU			"p15, 0, %0,  c7,  c5, 0"
+#define XREG_CP15_INVAL_IC_LINE_MVA_POU		"p15, 0, %0,  c7,  c5, 1"
+
+/* The CP15 register access below has been deprecated in favor of the new
+ * isb instruction in Cortex R5.
+ */
+#define XREG_CP15_INST_SYNC_BARRIER		"p15, 0, %0,  c7,  c5, 4"
+#define XREG_CP15_INVAL_BRANCH_ARRAY		"p15, 0, %0,  c7,  c5, 6"
+#define XREG_CP15_INVAL_BRANCH_ARRAY_LINE		"p15, 0, %0,  c7,  c5, 7"
+
+#define XREG_CP15_INVAL_DC_LINE_MVA_POC		"p15, 0, %0,  c7,  c6, 1"
+#define XREG_CP15_INVAL_DC_LINE_SW		"p15, 0, %0,  c7,  c6, 2"
+
+
+#define XREG_CP15_CLEAN_DC_LINE_MVA_POC		"p15, 0, %0,  c7, c10, 1"
+#define XREG_CP15_CLEAN_DC_LINE_SW		"p15, 0, %0,  c7, c10, 2"
+
+#define XREG_CP15_INVAL_DC_ALL		"p15, 0, %0,  c15, c5, 0"
+/* The next two CP15 register accesses below have been deprecated in favor
+ * of the new dsb and dmb instructions in Cortex R5.
+ */
+#define XREG_CP15_DATA_SYNC_BARRIER		"p15, 0, %0,  c7, c10, 4"
+#define XREG_CP15_DATA_MEMORY_BARRIER		"p15, 0, %0,  c7, c10, 5"
+
+#define XREG_CP15_CLEAN_DC_LINE_MVA_POU		"p15, 0, %0,  c7, c11, 1"
+
+#define XREG_CP15_NOP2				"p15, 0, %0,  c7, c13, 1"
+
+#define XREG_CP15_CLEAN_INVAL_DC_LINE_MVA_POC	"p15, 0, %0,  c7, c14, 1"
+#define XREG_CP15_CLEAN_INVAL_DC_LINE_SW	"p15, 0, %0,  c7, c14, 2"
+
+/* C8 Register Defines */
+/* Not Used */
+
+
+/* C9 Register Defines */
+
+#define XREG_CP15_ATCM_REG_SIZE_ADDR		"p15, 0, %0,  c9, c1, 1"
+#define XREG_CP15_BTCM_REG_SIZE_ADDR		"p15, 0, %0,  c9, c1, 0"
+#define XREG_CP15_TCM_SELECTION				"p15, 0, %0,  c9, c2, 0"
+
+#define XREG_CP15_PERF_MONITOR_CTRL		"p15, 0, %0,  c9, c12, 0"
+#define XREG_CP15_COUNT_ENABLE_SET		"p15, 0, %0,  c9, c12, 1"
+#define XREG_CP15_COUNT_ENABLE_CLR		"p15, 0, %0,  c9, c12, 2"
+#define XREG_CP15_V_FLAG_STATUS			"p15, 0, %0,  c9, c12, 3"
+#define XREG_CP15_SW_INC			"p15, 0, %0,  c9, c12, 4"
+#define XREG_CP15_EVENT_CNTR_SEL		"p15, 0, %0,  c9, c12, 5"
+
+#define XREG_CP15_PERF_CYCLE_COUNTER		"p15, 0, %0,  c9, c13, 0"
+#define XREG_CP15_EVENT_TYPE_SEL		"p15, 0, %0,  c9, c13, 1"
+#define XREG_CP15_PERF_MONITOR_COUNT		"p15, 0, %0,  c9, c13, 2"
+
+#define XREG_CP15_USER_ENABLE			"p15, 0, %0,  c9, c14, 0"
+#define XREG_CP15_INTR_ENABLE_SET		"p15, 0, %0,  c9, c14, 1"
+#define XREG_CP15_INTR_ENABLE_CLR		"p15, 0, %0,  c9, c14, 2"
+
+/* C10 Register Defines */
+/* Not used */
+
+/* C11 Register Defines */
+/* Not used */
+
+/* C12 Register Defines */
+/* Not used */
+
+/* C13 Register Defines */
+#define XREG_CP15_CONTEXT_ID			"p15, 0, %0, c13,  c0, 1"
+#define USER_RW_THREAD_PID			"p15, 0, %0, c13,  c0, 2"
+#define USER_RO_THREAD_PID			"p15, 0, %0, c13,  c0, 3"
+#define USER_PRIV_THREAD_PID			"p15, 0, %0, c13,  c0, 4"
+
+/* C14 Register Defines */
+/* not used */
+
+/* C15 Register Defines */
+#define XREG_CP15_SEC_AUX_CTRL			"p15, 0, %0, c15,  c0, 0"
+
+
+
+
+/* MPE register definitions */
+#define XREG_FPSID				c0
+#define XREG_FPSCR				c1
+#define XREG_MVFR1				c6
+#define XREG_MVFR0				c7
+#define XREG_FPEXC				c8
+#define XREG_FPINST				c9
+#define XREG_FPINST2			c10
+
+/* FPSID bits */
+#define XREG_FPSID_IMPLEMENTER_BIT	(24U)
+#define XREG_FPSID_IMPLEMENTER_MASK	(0x000000FFU << FPSID_IMPLEMENTER_BIT)
+#define XREG_FPSID_SOFTWARE		(0X00000001U << 23U)
+#define XREG_FPSID_ARCH_BIT		(16U)
+#define XREG_FPSID_ARCH_MASK		(0x0000000FU  << FPSID_ARCH_BIT)
+#define XREG_FPSID_PART_BIT		(8U)
+#define XREG_FPSID_PART_MASK		(0x000000FFU << FPSID_PART_BIT)
+#define XREG_FPSID_VARIANT_BIT		(4U)
+#define XREG_FPSID_VARIANT_MASK		(0x0000000FU  << FPSID_VARIANT_BIT)
+#define XREG_FPSID_REV_BIT		(0U)
+#define XREG_FPSID_REV_MASK		(0x0000000FU  << FPSID_REV_BIT)
+
+/* FPSCR bits */
+#define XREG_FPSCR_N_BIT		(0X00000001U << 31U)
+#define XREG_FPSCR_Z_BIT		(0X00000001U << 30U)
+#define XREG_FPSCR_C_BIT		(0X00000001U << 29U)
+#define XREG_FPSCR_V_BIT		(0X00000001U << 28U)
+#define XREG_FPSCR_QC			(0X00000001U << 27U)
+#define XREG_FPSCR_AHP			(0X00000001U << 26U)
+#define XREG_FPSCR_DEFAULT_NAN		(0X00000001U << 25U)
+#define XREG_FPSCR_FLUSHTOZERO		(0X00000001U << 24U)
+#define XREG_FPSCR_ROUND_NEAREST	(0X00000000U << 22U)
+#define XREG_FPSCR_ROUND_PLUSINF	(0X00000001U << 22U)
+#define XREG_FPSCR_ROUND_MINUSINF	(0X00000002U << 22U)
+#define XREG_FPSCR_ROUND_TOZERO		(0X00000003U << 22U)
+#define XREG_FPSCR_RMODE_BIT		(22U)
+#define XREG_FPSCR_RMODE_MASK		(0X00000003U << FPSCR_RMODE_BIT)
+#define XREG_FPSCR_STRIDE_BIT		(20U)
+#define XREG_FPSCR_STRIDE_MASK		(0X00000003U << FPSCR_STRIDE_BIT)
+#define XREG_FPSCR_LENGTH_BIT		(16U)
+#define XREG_FPSCR_LENGTH_MASK		(0X00000007U << FPSCR_LENGTH_BIT)
+#define XREG_FPSCR_IDC			(0X00000001U << 7U)
+#define XREG_FPSCR_IXC			(0X00000001U << 4U)
+#define XREG_FPSCR_UFC			(0X00000001U << 3U)
+#define XREG_FPSCR_OFC			(0X00000001U << 2U)
+#define XREG_FPSCR_DZC			(0X00000001U << 1U)
+#define XREG_FPSCR_IOC			(0X00000001U << 0U)
+
+/* MVFR0 bits */
+#define XREG_MVFR0_RMODE_BIT		(28U)
+#define XREG_MVFR0_RMODE_MASK		(0x0000000FU << XREG_MVFR0_RMODE_BIT)
+#define XREG_MVFR0_SHORT_VEC_BIT	(24U)
+#define XREG_MVFR0_SHORT_VEC_MASK	(0x0000000FU << XREG_MVFR0_SHORT_VEC_BIT)
+#define XREG_MVFR0_SQRT_BIT		(20U)
+#define XREG_MVFR0_SQRT_MASK		(0x0000000FU << XREG_MVFR0_SQRT_BIT)
+#define XREG_MVFR0_DIVIDE_BIT		(16U)
+#define XREG_MVFR0_DIVIDE_MASK		(0x0000000FU << XREG_MVFR0_DIVIDE_BIT)
+#define XREG_MVFR0_EXEC_TRAP_BIT	(12U)
+#define XREG_MVFR0_EXEC_TRAP_MASK	(0x0000000FU << XREG_MVFR0_EXEC_TRAP_BIT)
+#define XREG_MVFR0_DP_BIT		(8U)
+#define XREG_MVFR0_DP_MASK		(0x0000000FU << XREG_MVFR0_DP_BIT)
+#define XREG_MVFR0_SP_BIT		(4U)
+#define XREG_MVFR0_SP_MASK		(0x0000000FU << XREG_MVFR0_SP_BIT)
+#define XREG_MVFR0_A_SIMD_BIT		(0U)
+#define XREG_MVFR0_A_SIMD_MASK		(0x0000000FU << MVFR0_A_SIMD_BIT)
+
+/* FPEXC bits */
+#define XREG_FPEXC_EX			(0X00000001U << 31U)
+#define XREG_FPEXC_EN			(0X00000001U << 30U)
+#define XREG_FPEXC_DEX			(0X00000001U << 29U)
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XREG_CORTEXR5_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xstatus.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xstatus.h
new file mode 100644
index 000000000..ba5f96b20
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xstatus.h
@@ -0,0 +1,430 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xstatus.h
+*
+* This file contains Xilinx software status codes.  Status codes have their
+* own data type called int.  These codes are used throughout the Xilinx
+* device drivers.
+*
+******************************************************************************/
+
+#ifndef XSTATUS_H		/* prevent circular inclusions */
+#define XSTATUS_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+
+/************************** Constant Definitions *****************************/
+
+/*********************** Common statuses 0 - 500 *****************************/
+
+#define XST_SUCCESS                     0L
+#define XST_FAILURE                     1L
+#define XST_DEVICE_NOT_FOUND            2L
+#define XST_DEVICE_BLOCK_NOT_FOUND      3L
+#define XST_INVALID_VERSION             4L
+#define XST_DEVICE_IS_STARTED           5L
+#define XST_DEVICE_IS_STOPPED           6L
+#define XST_FIFO_ERROR                  7L	/* an error occurred during an
+						   operation with a FIFO such as
+						   an underrun or overrun, this
+						   error requires the device to
+						   be reset */
+#define XST_RESET_ERROR                 8L	/* an error occurred which requires
+						   the device to be reset */
+#define XST_DMA_ERROR                   9L	/* a DMA error occurred, this error
+						   typically requires the device
+						   using the DMA to be reset */
+#define XST_NOT_POLLED                  10L	/* the device is not configured for
+						   polled mode operation */
+#define XST_FIFO_NO_ROOM                11L	/* a FIFO did not have room to put
+						   the specified data into */
+#define XST_BUFFER_TOO_SMALL            12L	/* the buffer is not large enough
+						   to hold the expected data */
+#define XST_NO_DATA                     13L	/* there was no data available */
+#define XST_REGISTER_ERROR              14L	/* a register did not contain the
+						   expected value */
+#define XST_INVALID_PARAM               15L	/* an invalid parameter was passed
+						   into the function */
+#define XST_NOT_SGDMA                   16L	/* the device is not configured for
+						   scatter-gather DMA operation */
+#define XST_LOOPBACK_ERROR              17L	/* a loopback test failed */
+#define XST_NO_CALLBACK                 18L	/* a callback has not yet been
+						   registered */
+#define XST_NO_FEATURE                  19L	/* device is not configured with
+						   the requested feature */
+#define XST_NOT_INTERRUPT               20L	/* device is not configured for
+						   interrupt mode operation */
+#define XST_DEVICE_BUSY                 21L	/* device is busy */
+#define XST_ERROR_COUNT_MAX             22L	/* the error counters of a device
+						   have maxed out */
+#define XST_IS_STARTED                  23L	/* used when part of device is
+						   already started i.e.
+						   sub channel */
+#define XST_IS_STOPPED                  24L	/* used when part of device is
+						   already stopped i.e.
+						   sub channel */
+#define XST_DATA_LOST                   26L	/* driver defined error */
+#define XST_RECV_ERROR                  27L	/* generic receive error */
+#define XST_SEND_ERROR                  28L	/* generic transmit error */
+#define XST_NOT_ENABLED                 29L	/* a requested service is not
+						   available because it has not
+						   been enabled */
+
+/***************** Utility Component statuses 401 - 500  *********************/
+
+#define XST_MEMTEST_FAILED              401L	/* memory test failed */
+
+
+/***************** Common Components statuses 501 - 1000 *********************/
+
+/********************* Packet Fifo statuses 501 - 510 ************************/
+
+#define XST_PFIFO_LACK_OF_DATA          501L	/* not enough data in FIFO   */
+#define XST_PFIFO_NO_ROOM               502L	/* not enough room in FIFO   */
+#define XST_PFIFO_BAD_REG_VALUE         503L	/* self test, a register value
+						   was invalid after reset */
+#define XST_PFIFO_ERROR                 504L	/* generic packet FIFO error */
+#define XST_PFIFO_DEADLOCK              505L	/* packet FIFO is reporting
+						 * empty and full simultaneously
+						 */
+
+/************************** DMA statuses 511 - 530 ***************************/
+
+#define XST_DMA_TRANSFER_ERROR          511L	/* self test, DMA transfer
+						   failed */
+#define XST_DMA_RESET_REGISTER_ERROR    512L	/* self test, a register value
+						   was invalid after reset */
+#define XST_DMA_SG_LIST_EMPTY           513L	/* scatter gather list contains
+						   no buffer descriptors ready
+						   to be processed */
+#define XST_DMA_SG_IS_STARTED           514L	/* scatter gather not stopped */
+#define XST_DMA_SG_IS_STOPPED           515L	/* scatter gather not running */
+#define XST_DMA_SG_LIST_FULL            517L	/* all the buffer desciptors of
+						   the scatter gather list are
+						   being used */
+#define XST_DMA_SG_BD_LOCKED            518L	/* the scatter gather buffer
+						   descriptor which is to be
+						   copied over in the scatter
+						   list is locked */
+#define XST_DMA_SG_NOTHING_TO_COMMIT    519L	/* no buffer descriptors have been
+						   put into the scatter gather
+						   list to be commited */
+#define XST_DMA_SG_COUNT_EXCEEDED       521L	/* the packet count threshold
+						   specified was larger than the
+						   total # of buffer descriptors
+						   in the scatter gather list */
+#define XST_DMA_SG_LIST_EXISTS          522L	/* the scatter gather list has
+						   already been created */
+#define XST_DMA_SG_NO_LIST              523L	/* no scatter gather list has
+						   been created */
+#define XST_DMA_SG_BD_NOT_COMMITTED     524L	/* the buffer descriptor which was
+						   being started was not committed
+						   to the list */
+#define XST_DMA_SG_NO_DATA              525L	/* the buffer descriptor to start
+						   has already been used by the
+						   hardware so it can't be reused
+						 */
+#define XST_DMA_SG_LIST_ERROR           526L	/* general purpose list access
+						   error */
+#define XST_DMA_BD_ERROR                527L	/* general buffer descriptor
+						   error */
+
+/************************** IPIF statuses 531 - 550 ***************************/
+
+#define XST_IPIF_REG_WIDTH_ERROR        531L	/* an invalid register width
+						   was passed into the function */
+#define XST_IPIF_RESET_REGISTER_ERROR   532L	/* the value of a register at
+						   reset was not valid */
+#define XST_IPIF_DEVICE_STATUS_ERROR    533L	/* a write to the device interrupt
+						   status register did not read
+						   back correctly */
+#define XST_IPIF_DEVICE_ACK_ERROR       534L	/* the device interrupt status
+						   register did not reset when
+						   acked */
+#define XST_IPIF_DEVICE_ENABLE_ERROR    535L	/* the device interrupt enable
+						   register was not updated when
+						   other registers changed */
+#define XST_IPIF_IP_STATUS_ERROR        536L	/* a write to the IP interrupt
+						   status register did not read
+						   back correctly */
+#define XST_IPIF_IP_ACK_ERROR           537L	/* the IP interrupt status register
+						   did not reset when acked */
+#define XST_IPIF_IP_ENABLE_ERROR        538L	/* IP interrupt enable register was
+						   not updated correctly when other
+						   registers changed */
+#define XST_IPIF_DEVICE_PENDING_ERROR   539L	/* The device interrupt pending
+						   register did not indicate the
+						   expected value */
+#define XST_IPIF_DEVICE_ID_ERROR        540L	/* The device interrupt ID register
+						   did not indicate the expected
+						   value */
+#define XST_IPIF_ERROR                  541L	/* generic ipif error */
+
+/****************** Device specific statuses 1001 - 4095 *********************/
+
+/********************* Ethernet statuses 1001 - 1050 *************************/
+
+#define XST_EMAC_MEMORY_SIZE_ERROR  1001L	/* Memory space is not big enough
+						 * to hold the minimum number of
+						 * buffers or descriptors */
+#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L	/* Memory allocation failed */
+#define XST_EMAC_MII_READ_ERROR     1003L	/* MII read error */
+#define XST_EMAC_MII_BUSY           1004L	/* An MII operation is in progress */
+#define XST_EMAC_OUT_OF_BUFFERS     1005L	/* Driver is out of buffers */
+#define XST_EMAC_PARSE_ERROR        1006L	/* Invalid driver init string */
+#define XST_EMAC_COLLISION_ERROR    1007L	/* Excess deferral or late
+						 * collision on polled send */
+
+/*********************** UART statuses 1051 - 1075 ***************************/
+#define XST_UART
+
+#define XST_UART_INIT_ERROR         1051L
+#define XST_UART_START_ERROR        1052L
+#define XST_UART_CONFIG_ERROR       1053L
+#define XST_UART_TEST_FAIL          1054L
+#define XST_UART_BAUD_ERROR         1055L
+#define XST_UART_BAUD_RANGE         1056L
+
+
+/************************ IIC statuses 1076 - 1100 ***************************/
+
+#define XST_IIC_SELFTEST_FAILED         1076	/* self test failed            */
+#define XST_IIC_BUS_BUSY                1077	/* bus found busy              */
+#define XST_IIC_GENERAL_CALL_ADDRESS    1078	/* mastersend attempted with   */
+					     /* general call address        */
+#define XST_IIC_STAND_REG_RESET_ERROR   1079	/* A non parameterizable reg   */
+					     /* value after reset not valid */
+#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080	/* Tx fifo included in design  */
+					     /* value after reset not valid */
+#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081	/* Rx fifo included in design  */
+					     /* value after reset not valid */
+#define XST_IIC_TBA_REG_RESET_ERROR     1082	/* 10 bit addr incl in design  */
+					     /* value after reset not valid */
+#define XST_IIC_CR_READBACK_ERROR       1083	/* Read of the control register */
+					     /* didn't return value written */
+#define XST_IIC_DTR_READBACK_ERROR      1084	/* Read of the data Tx reg     */
+					     /* didn't return value written */
+#define XST_IIC_DRR_READBACK_ERROR      1085	/* Read of the data Receive reg */
+					     /* didn't return value written */
+#define XST_IIC_ADR_READBACK_ERROR      1086	/* Read of the data Tx reg     */
+					     /* didn't return value written */
+#define XST_IIC_TBA_READBACK_ERROR      1087	/* Read of the 10 bit addr reg */
+					     /* didn't return written value */
+#define XST_IIC_NOT_SLAVE               1088	/* The device isn't a slave    */
+
+/*********************** ATMC statuses 1101 - 1125 ***************************/
+
+#define XST_ATMC_ERROR_COUNT_MAX    1101L	/* the error counters in the ATM
+						   controller hit the max value
+						   which requires the statistics
+						   to be cleared */
+
+/*********************** Flash statuses 1126 - 1150 **************************/
+
+#define XST_FLASH_BUSY                1126L	/* Flash is erasing or programming
+						 */
+#define XST_FLASH_READY               1127L	/* Flash is ready for commands */
+#define XST_FLASH_ERROR               1128L	/* Flash had detected an internal
+						   error. Use XFlash_DeviceControl
+						   to retrieve device specific codes
+						 */
+#define XST_FLASH_ERASE_SUSPENDED     1129L	/* Flash is in suspended erase state
+						 */
+#define XST_FLASH_WRITE_SUSPENDED     1130L	/* Flash is in suspended write state
+						 */
+#define XST_FLASH_PART_NOT_SUPPORTED  1131L	/* Flash type not supported by
+						   driver */
+#define XST_FLASH_NOT_SUPPORTED       1132L	/* Operation not supported */
+#define XST_FLASH_TOO_MANY_REGIONS    1133L	/* Too many erase regions */
+#define XST_FLASH_TIMEOUT_ERROR       1134L	/* Programming or erase operation
+						   aborted due to a timeout */
+#define XST_FLASH_ADDRESS_ERROR       1135L	/* Accessed flash outside its
+						   addressible range */
+#define XST_FLASH_ALIGNMENT_ERROR     1136L	/* Write alignment error */
+#define XST_FLASH_BLOCKING_CALL_ERROR 1137L	/* Couldn't return immediately from
+						   write/erase function with
+						   XFL_NON_BLOCKING_WRITE/ERASE
+						   option cleared */
+#define XST_FLASH_CFI_QUERY_ERROR     1138L	/* Failed to query the device */
+
+/*********************** SPI statuses 1151 - 1175 ****************************/
+
+#define XST_SPI_MODE_FAULT          1151	/* master was selected as slave */
+#define XST_SPI_TRANSFER_DONE       1152	/* data transfer is complete */
+#define XST_SPI_TRANSMIT_UNDERRUN   1153	/* slave underruns transmit register */
+#define XST_SPI_RECEIVE_OVERRUN     1154	/* device overruns receive register */
+#define XST_SPI_NO_SLAVE            1155	/* no slave has been selected yet */
+#define XST_SPI_TOO_MANY_SLAVES     1156	/* more than one slave is being
+						 * selected */
+#define XST_SPI_NOT_MASTER          1157	/* operation is valid only as master */
+#define XST_SPI_SLAVE_ONLY          1158	/* device is configured as slave-only
+						 */
+#define XST_SPI_SLAVE_MODE_FAULT    1159	/* slave was selected while disabled */
+#define XST_SPI_SLAVE_MODE          1160	/* device has been addressed as slave */
+#define XST_SPI_RECEIVE_NOT_EMPTY   1161	/* device received data in slave mode */
+
+#define XST_SPI_COMMAND_ERROR       1162	/* unrecognised command - qspi only */
+
+/********************** OPB Arbiter statuses 1176 - 1200 *********************/
+
+#define XST_OPBARB_INVALID_PRIORITY  1176	/* the priority registers have either
+						 * one master assigned to two or more
+						 * priorities, or one master not
+						 * assigned to any priority
+						 */
+#define XST_OPBARB_NOT_SUSPENDED     1177	/* an attempt was made to modify the
+						 * priority levels without first
+						 * suspending the use of priority
+						 * levels
+						 */
+#define XST_OPBARB_PARK_NOT_ENABLED  1178	/* bus parking by id was enabled but
+						 * bus parking was not enabled
+						 */
+#define XST_OPBARB_NOT_FIXED_PRIORITY 1179	/* the arbiter must be in fixed
+						 * priority mode to allow the
+						 * priorities to be changed
+						 */
+
+/************************ Intc statuses 1201 - 1225 **************************/
+
+#define XST_INTC_FAIL_SELFTEST      1201	/* self test failed */
+#define XST_INTC_CONNECT_ERROR      1202	/* interrupt already in use */
+
+/********************** TmrCtr statuses 1226 - 1250 **************************/
+
+#define XST_TMRCTR_TIMER_FAILED     1226	/* self test failed */
+
+/********************** WdtTb statuses 1251 - 1275 ***************************/
+
+#define XST_WDTTB_TIMER_FAILED      1251L
+
+/********************** PlbArb statuses 1276 - 1300 **************************/
+
+#define XST_PLBARB_FAIL_SELFTEST    1276L
+
+/********************** Plb2Opb statuses 1301 - 1325 *************************/
+
+#define XST_PLB2OPB_FAIL_SELFTEST   1301L
+
+/********************** Opb2Plb statuses 1326 - 1350 *************************/
+
+#define XST_OPB2PLB_FAIL_SELFTEST   1326L
+
+/********************** SysAce statuses 1351 - 1360 **************************/
+
+#define XST_SYSACE_NO_LOCK          1351L	/* No MPU lock has been granted */
+
+/********************** PCI Bridge statuses 1361 - 1375 **********************/
+
+#define XST_PCI_INVALID_ADDRESS     1361L
+
+/********************** FlexRay constants 1400 - 1409 *************************/
+
+#define XST_FR_TX_ERROR			1400
+#define XST_FR_TX_BUSY			1401
+#define XST_FR_BUF_LOCKED		1402
+#define XST_FR_NO_BUF			1403
+
+/****************** USB constants 1410 - 1420  *******************************/
+
+#define XST_USB_ALREADY_CONFIGURED	1410
+#define XST_USB_BUF_ALIGN_ERROR		1411
+#define XST_USB_NO_DESC_AVAILABLE	1412
+#define XST_USB_BUF_TOO_BIG		1413
+#define XST_USB_NO_BUF			1414
+
+/****************** HWICAP constants 1421 - 1429  *****************************/
+
+#define XST_HWICAP_WRITE_DONE		1421
+
+
+/****************** AXI VDMA constants 1430 - 1440  *****************************/
+
+#define XST_VDMA_MISMATCH_ERROR		1430
+
+/*********************** NAND Flash statuses 1441 - 1459  *********************/
+
+#define XST_NAND_BUSY			1441L	/* Flash is erasing or
+						 * programming
+						 */
+#define XST_NAND_READY			1442L	/* Flash is ready for commands
+						 */
+#define XST_NAND_ERROR			1443L	/* Flash had detected an
+						 * internal error.
+						 */
+#define XST_NAND_PART_NOT_SUPPORTED	1444L	/* Flash type not supported by
+						 * driver
+						 */
+#define XST_NAND_OPT_NOT_SUPPORTED	1445L	/* Operation not supported
+						 */
+#define XST_NAND_TIMEOUT_ERROR		1446L	/* Programming or erase
+						 * operation aborted due to a
+						 * timeout
+						 */
+#define XST_NAND_ADDRESS_ERROR		1447L	/* Accessed flash outside its
+						 * addressible range
+						 */
+#define XST_NAND_ALIGNMENT_ERROR	1448L	/* Write alignment error
+						 */
+#define XST_NAND_PARAM_PAGE_ERROR	1449L	/* Failed to read parameter
+						 * page of the device
+						 */
+#define XST_NAND_CACHE_ERROR		1450L	/* Flash page buffer error
+						 */
+
+#define XST_NAND_WRITE_PROTECTED	1451L	/* Flash is write protected
+						 */
+
+/**************************** Type Definitions *******************************/
+
+typedef int XStatus;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xtime_l.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xtime_l.c
new file mode 100644
index 000000000..a17ee404b
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xtime_l.c
@@ -0,0 +1,187 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xtime_l.c
+*
+* This file contains low level functions to get/set time from the Global Timer
+* register in the ARM Cortex R5 core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------------
+* 5.00 	pkp    08/29/14 First release
+* 5.04  pkp	   02/19/16 XTime_StartTimer API is added to configure TTC3 timer
+*						when present. XTime_GetTime is modified to give 64bit
+*						output using timer overflow when TTC3 present.
+*						XTime_SetTime is modified to configure TTC3 counter
+*						value when present.
+* 5.04	pkp	   03/11/16 XTime_StartTimer is modified to avoid enabling the
+*						overflow interrupt and XTime_GetTime & XTime_SetTime
+*						are modified to read and write TTC counter value
+*						respectively
+* 5.04	pkp
+* 

+*
+* @note		None.
+*
+******************************************************************************/
+/***************************** Include Files *********************************/
+
+#include "xtime_l.h"
+#include "xpseudo_asm.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/**************************** Type Definitions *******************************/
+
+/************************** Constant Definitions *****************************/
+#define RST_LPD_IOU2 					0xFF5E0238U
+#define RST_LPD_IOU2_TTC3_RESET_MASK	0x00004000U
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+/* Function definitions are applicable only when TTC3 is present*/
+#ifdef SLEEP_TIMER_BASEADDR
+/****************************************************************************
+*
+* Start the TTC timer.
+*
+* @param	None.
+*
+* @return	None.
+*
+* @note		In multiprocessor environment reference time will reset/lost for
+*		all processors, when this function called by any one processor.
+*
+****************************************************************************/
+void XTime_StartTimer(void)
+{
+	u32 LpdRst;
+	u32 TimerPrescalar;
+	u32 TimerCntrl;
+
+	LpdRst = Xil_In32(RST_LPD_IOU2);
+	if ((LpdRst & RST_LPD_IOU2_TTC3_RESET_MASK) != 0 ) {
+			LpdRst = LpdRst & (~RST_LPD_IOU2_TTC3_RESET_MASK);
+			Xil_Out32(RST_LPD_IOU2, LpdRst);
+
+	} else {
+		TimerCntrl = Xil_In32(SLEEP_TIMER_BASEADDR +
+								SLEEP_TIMER_CNTR_CNTRL_OFFSET);
+		/* check if Timer is disabled */
+		if ((TimerCntrl & SLEEP_TIMER_COUNTER_CONTROL_DIS_MASK) == 0) {
+			TimerPrescalar = Xil_In32(SLEEP_TIMER_BASEADDR +
+									SLEEP_TIMER_CLK_CNTRL_OFFSET);
+
+		/* check if Timer is configured with proper functionalty for sleep */
+			if ((TimerPrescalar & SLEEP_TIMER_CLOCK_CONTROL_PS_EN_MASK) == 0)
+						return;
+		}
+	}
+	/* Disable the timer to configure */
+	TimerCntrl = Xil_In32(SLEEP_TIMER_BASEADDR +
+							SLEEP_TIMER_CNTR_CNTRL_OFFSET);
+	TimerCntrl = TimerCntrl | SLEEP_TIMER_COUNTER_CONTROL_DIS_MASK;
+	Xil_Out32(SLEEP_TIMER_BASEADDR + SLEEP_TIMER_CNTR_CNTRL_OFFSET,
+				TimerCntrl);
+
+	/* Disable the prescalar */
+	TimerPrescalar = Xil_In32(SLEEP_TIMER_BASEADDR +
+								SLEEP_TIMER_CLK_CNTRL_OFFSET);
+	TimerPrescalar = TimerPrescalar & (~SLEEP_TIMER_CLOCK_CONTROL_PS_EN_MASK);
+	Xil_Out32(SLEEP_TIMER_BASEADDR + SLEEP_TIMER_CLK_CNTRL_OFFSET,
+				TimerPrescalar);
+
+	/* Enable the Timer */
+	TimerCntrl = SLEEP_TIMER_COUNTER_CONTROL_RST_MASK &
+					(~SLEEP_TIMER_COUNTER_CONTROL_DIS_MASK);
+	Xil_Out32(SLEEP_TIMER_BASEADDR + SLEEP_TIMER_CNTR_CNTRL_OFFSET,
+				TimerCntrl);
+
+}
+/****************************************************************************
+*
+* Set the time in the Timer Counter Register.
+*
+* @param	Value to be written to the Timer Counter Register.
+*
+* @return	None.
+*
+* @note		In multiprocessor environment reference time will reset/lost for
+*		all processors, when this function called by any one processor.
+*
+****************************************************************************/
+void XTime_SetTime(XTime Xtime_Global)
+{
+	u32 TimerCntrl;
+	/* Disable the timer to configure */
+	TimerCntrl = Xil_In32(SLEEP_TIMER_BASEADDR +
+							SLEEP_TIMER_CNTR_CNTRL_OFFSET);
+	TimerCntrl = TimerCntrl | SLEEP_TIMER_COUNTER_CONTROL_DIS_MASK;
+	Xil_Out32(SLEEP_TIMER_BASEADDR + SLEEP_TIMER_CNTR_CNTRL_OFFSET,
+				TimerCntrl);
+
+	/* Write the lower 32bit value to timer counter register */
+	Xil_Out32(SLEEP_TIMER_BASEADDR + SLEEP_TIMER_CNTR_VAL_OFFSET,
+				Xtime_Global);
+
+	/* Enable the Timer */
+	TimerCntrl = Xil_In32(SLEEP_TIMER_BASEADDR +
+							SLEEP_TIMER_CNTR_CNTRL_OFFSET);
+	TimerCntrl = TimerCntrl & (~SLEEP_TIMER_COUNTER_CONTROL_DIS_MASK);
+	Xil_Out32(SLEEP_TIMER_BASEADDR + SLEEP_TIMER_CNTR_CNTRL_OFFSET,
+				TimerCntrl);
+}
+
+/****************************************************************************
+*
+* Get the time from the Timer Counter Register.
+*
+* @param	Pointer to the location to be updated with the time.
+*
+* @return	None.
+*
+* @note		None.
+*
+****************************************************************************/
+void XTime_GetTime(XTime *Xtime_Global)
+{
+	*Xtime_Global = Xil_In32(SLEEP_TIMER_BASEADDR +
+								SLEEP_TIMER_CNTR_VAL_OFFSET);
+}
+#endif
\ No newline at end of file
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xtime_l.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xtime_l.h
new file mode 100644
index 000000000..36c416d5a
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/standalone_v5_4/src/xtime_l.h
@@ -0,0 +1,99 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xtime_l.h
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------------
+* 5.00 	pkp	   05/29/14 First release
+* 5.04  pkp	   02/19/16 Added timer configuration register offset definitions
+* 5.04	pkp	   03/11/16 Removed definitions for overflow interrupt register
+*						and mask
+* 

+*
+* @note		None.
+*
+******************************************************************************/
+
+#ifndef XTIME_H /* prevent circular inclusions */
+#define XTIME_H /* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+#include "xil_types.h"
+#include "xparameters.h"
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Constant Definitions *****************************/
+
+#ifdef SLEEP_TIMER_BASEADDR
+
+#define COUNTS_PER_SECOND				SLEEP_TIMER_FREQUENCY
+#define COUNTS_PER_USECOND 				COUNTS_PER_SECOND/1000000
+
+/* Timer Register Offset*/
+#define SLEEP_TIMER_CLK_CNTRL_OFFSET 		0x00000000U
+#define SLEEP_TIMER_CNTR_CNTRL_OFFSET		0x0000000CU
+#define SLEEP_TIMER_CNTR_VAL_OFFSET			0x00000018U
+
+/*Timer register values*/
+#define SLEEP_TIMER_COUNTER_CONTROL_DIS_MASK    0x00000001U
+#define SLEEP_TIMER_CLOCK_CONTROL_PS_EN_MASK    0x00000001U
+#define SLEEP_TIMER_COUNTER_CONTROL_RST_MASK    0x00000010U
+#else
+#define ITERS_PER_SEC  (XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ / 4)
+#define ITERS_PER_USEC  (XPAR_CPU_CORTEXR5_0_CPU_CLK_FREQ_HZ / 4000000)
+#define IRQ_FIQ_MASK 	0xC0	/* Mask IRQ and FIQ interrupts in cpsr */
+#endif
+
+/**************************** Type Definitions *******************************/
+
+/* The following definitions are applicable only when TTC3 is present*/
+#ifdef SLEEP_TIMER_BASEADDR
+typedef u32 XTime;
+
+void XTime_SetTime(XTime Xtime_Global);
+void XTime_GetTime(XTime *Xtime_Global);
+#endif
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* XTIME_H */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/Makefile
new file mode 100644
index 000000000..b832910b8
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xsysmonpsu_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling sysmonpsu"
+
+xsysmonpsu_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xsysmonpsu_includes
+
+xsysmonpsu_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu.c
new file mode 100644
index 000000000..a30a257fb
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu.c
@@ -0,0 +1,1749 @@
+/******************************************************************************
+*
+* Copyright (C) 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsysmonpsu.c
+*
+* Functions in this file are the minimum required functions for the XSysMonPsu
+* driver. See xsysmonpsu.h for a detailed description of the driver.
+*
+* @note 	None.
+*
+* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	    Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.0   kvn    12/15/15 First release.
+*              02/15/16 Corrected Assert function call in
+*                       XSysMonPsu_GetMonitorStatus API.
+*              03/03/16 Added Temperature remote channel for Setsingle
+*                       channel API. Also corrected external mux channel
+*                       numbers.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xsysmonpsu.h"
+
+/************************** Constant Definitions ****************************/
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Function Prototypes *****************************/
+
+static void XSysMonPsu_StubHandler(void *CallBackRef);
+
+/************************** Variable Definitions ****************************/
+
+/*****************************************************************************/
+/**
+*
+* This function initializes XSysMonPsu device/instance. This function
+* must be called prior to using the System Monitor device.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	ConfigPtr points to the XSysMonPsu device configuration structure.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. If the address translation is not used then the
+*		physical address is passed.
+*		Unexpected errors may occur if the address mapping is changed
+*		after this function is invoked.
+*
+* @return
+*		- XST_SUCCESS if successful.
+*
+* @note		The user needs to first call the XSysMonPsu_LookupConfig() API
+*		which returns the Configuration structure pointer which is
+*		passed as a parameter to the XSysMonPsu_CfgInitialize() API.
+*
+******************************************************************************/
+s32 XSysMonPsu_CfgInitialize(XSysMonPsu *InstancePtr, XSysMonPsu_Config *ConfigPtr,
+			  u32 EffectiveAddr)
+{
+	u32 PsSysmonControlStatus;
+	u32 PlSysmonControlStatus;
+
+	/* Assert the input arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+
+	/* Set the values read from the device config and the base address. */
+	InstancePtr->Config.DeviceId = ConfigPtr->DeviceId;
+	InstancePtr->Config.BaseAddress = EffectiveAddr;
+
+
+	/* Set all handlers to stub values, let user configure this data later. */
+	InstancePtr->Handler = XSysMonPsu_StubHandler;
+
+	/* Reset the device such that it is in a known state. */
+	XSysMonPsu_Reset(InstancePtr);
+
+	PsSysmonControlStatus = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+			XSYSMONPSU_PS_SYSMON_CSTS_OFFSET);
+
+	/* Check if the PS Sysmon is in Idle / ready state or not */
+	while(PsSysmonControlStatus != XSYSMONPSU_PS_SYSMON_READY) {
+		PsSysmonControlStatus = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_PS_SYSMON_CSTS_OFFSET);
+	}
+
+	PlSysmonControlStatus = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+			XSYSMONPSU_PL_SYSMON_CSTS_OFFSET);
+
+	/* Check if the PL Sysmon is accessible to PS Sysmon or not */
+	while((PlSysmonControlStatus & XSYSMONPSU_PL_SYSMON_CSTS_ACESBLE_MASK)
+				!= XSYSMONPSU_PL_SYSMON_CSTS_ACESBLE_MASK) {
+		PlSysmonControlStatus = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_PL_SYSMON_CSTS_OFFSET);
+	}
+
+	/* Indicate the instance is now ready to use, initialized without error */
+	InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+
+	return XST_SUCCESS;
+}
+
+/****************************************************************************/
+/**
+*
+* This function is a stub handler that is the default handler such that if the
+* application has not set the handler when interrupts are enabled, this
+* function will be called.
+*
+* @param	CallBackRef is unused by this function.
+* @param	Event is unused by this function.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void XSysMonPsu_StubHandler(void *CallBackRef)
+{
+	(void *) CallBackRef;
+
+	/* Assert occurs always since this is a stub and should never be called */
+	Xil_AssertVoidAlways();
+}
+
+/*****************************************************************************/
+/**
+*
+* This function resets the SystemMonitor
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+*
+* @return	None.
+*
+* @note		Upon reset, all Maximum and Minimum status registers will be
+*		reset to their default values. Currently running and any averaging
+*		will restart. Refer to the device data sheet for the device status and
+*		register values after the reset.
+*
+******************************************************************************/
+void XSysMonPsu_Reset(XSysMonPsu *InstancePtr)
+{
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	/* RESET the PS SYSMON */
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XPS_BA_OFFSET +
+			XSYSMONPSU_VP_VN_OFFSET, XSYSMONPSU_VP_VN_MASK);
+
+	/* RESET the PL SYSMON */
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XPL_BA_OFFSET +
+			XSYSMONPSU_VP_VN_OFFSET, XSYSMONPSU_VP_VN_MASK);
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function reads the contents of the Status Register.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	A 32-bit value representing the contents of the Status Register.
+*		Use the XSYSMONPSU_MON_STS_* constants defined in xsysmonpsu_hw.h to
+*		interpret the returned value.
+*
+* @note		None.
+*****************************************************************************/
+u32 XSysMonPsu_GetStatus(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 Status;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read the Sysmon Status Register and return the value. */
+	Status = XSysmonPsu_ReadReg(EffectiveBaseAddress + XSYSMONPSU_MON_STS_OFFSET);
+
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function starts the ADC conversion in the Single Channel event driven
+* sampling mode. The EOC bit in Status Register will be set once the conversion
+* is finished. Refer to the device specification for more details.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+*
+* @return	None.
+*
+* @note		The default state of the CONVST bit is a logic 0. The conversion
+*		is started when the CONVST bit is set to 1 from 0.
+*		This bit is self-clearing so that the next conversion
+*		can be started by setting this bit.
+*
+*****************************************************************************/
+void XSysMonPsu_StartAdcConversion(XSysMonPsu *InstancePtr)
+{
+	u32 ControlStatus;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Start the conversion by setting the CONVST bit to 1 only if auto-convst
+	 * bit is not enabled. This convst bit is self-clearing.
+	 */
+	ControlStatus = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+			XSYSMONPSU_PS_SYSMON_CSTS_OFFSET);
+
+	if ((ControlStatus & XSYSMONPSU_PS_SYSMON_CSTS_AUTO_CONVST_MASK )
+			!= XSYSMONPSU_PS_SYSMON_CSTS_AUTO_CONVST_MASK) {
+		XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_PS_SYSMON_CSTS_OFFSET,
+					(ControlStatus | (u32)XSYSMONPSU_PS_SYSMON_CSTS_CONVST_MASK));
+	}
+}
+
+/****************************************************************************/
+/**
+*
+* Get the ADC converted data for the specified channel.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Channel is the channel number. Use the XSM_CH_* defined in
+*		the file xsysmonpsu.h. The valid channels for PS / PL SysMon are 0 - 6,
+*		8 - 10 and 13 - 37. For AMS, 38 - 53 channels are valid.
+* @param	Block is the value that tells whether it is for PS Sysmon block
+*       or PL Sysmon block or the AMS controller register region.
+*
+* @return	A 16-bit value representing the ADC converted data for the
+*		specified channel. The System Monitor device guarantees
+* 		a 10 bit resolution for the ADC converted data and data is the
+*		10 MSB bits of the 16 data read from the device.
+*
+* @note		Please make sure that the proper channel number is passed.
+*
+*****************************************************************************/
+u16 XSysMonPsu_GetAdcData(XSysMonPsu *InstancePtr, u8 Channel, u32 Block)
+{
+	u16 AdcData;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((Channel <= XSM_CH_SUPPLY3) ||
+			  ((Channel >= XSM_CH_SUPPLY_CALIB) &&
+			  (Channel <= XSM_CH_GAINERR_CALIB)) ||
+			  ((Channel >= XSM_CH_SUPPLY4) &&
+			  (Channel <= XSM_CH_RESERVE1)));
+	Xil_AssertNonvoid((Block == XSYSMON_PS)||(Block == XSYSMON_PL)
+						||(Block == XSYSMON_AMS));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					Block);
+
+	/*
+	 * Read the selected ADC converted data for the specified channel
+	 * and return the value.
+	 */
+	if (Channel <= XSM_CH_AUX_MAX) {
+		AdcData = (u16) (XSysmonPsu_ReadReg(EffectiveBaseAddress + ((u32)Channel << 2U)));
+	} else if ((Channel >= XSM_CH_SUPPLY7) && (Channel <= XSM_CH_TEMP_REMTE)){
+		AdcData = (u16) (XSysmonPsu_ReadReg(EffectiveBaseAddress + XSM_ADC_CH_OFFSET +
+				(((u32)Channel - XSM_CH_SUPPLY7) << 2U)));
+	} else {
+		AdcData = (u16) (XSysmonPsu_ReadReg(EffectiveBaseAddress + XSM_AMS_CH_OFFSET +
+				(((u32)Channel - XSM_CH_VCC_PSLL0) << 2U)));
+	}
+
+	return AdcData;
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the calibration coefficient data for the specified
+* parameter.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	CoeffType specifies the calibration coefficient
+*		to be read. Use XSM_CALIB_* constants defined in xsysmonpsu.h to
+*		specify the calibration coefficient to be read.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	A 16-bit value representing the calibration coefficient.
+*		The System Monitor device guarantees a 10 bit resolution for
+*		the ADC converted data and data is the 10 MSB bits of the 16
+*		data read from the device.
+*
+* @note		None.
+*
+*****************************************************************************/
+u16 XSysMonPsu_GetCalibCoefficient(XSysMonPsu *InstancePtr, u8 CoeffType,
+		u32 SysmonBlk)
+{
+	u16 CalibData;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(CoeffType <= XSM_CALIB_GAIN_ERROR_COEFF);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read the selected calibration coefficient. */
+	CalibData = (u16) XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_CAL_SUP_OFF_OFFSET + ((u32)CoeffType << 2U));
+
+	return CalibData;
+}
+
+/****************************************************************************/
+/**
+*
+* This function reads the Minimum/Maximum measurement for one of the
+* XSM_MIN_* or XSM_MAX_* constants defined in xsysmonpsu.h
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	MeasurementType specifies the parameter for which the
+*		Minimum/Maximum measurement has to be read.
+*		Use XSM_MAX_* and XSM_MIN_* constants defined in xsysmonpsu.h to
+*		specify the data to be read.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	A 16-bit value representing the maximum/minimum measurement for
+*		specified parameter.
+*		The System Monitor device guarantees a 10 bit resolution for
+*		the ADC converted data and data is the 10 MSB bits of  16 bit
+*		data read from the device.
+*
+*****************************************************************************/
+u16 XSysMonPsu_GetMinMaxMeasurement(XSysMonPsu *InstancePtr, u8 MeasurementType,
+		u32 SysmonBlk)
+{
+	u16 MinMaxData;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((MeasurementType <= XSM_MAX_SUPPLY6) ||
+			((MeasurementType >= XSM_MIN_SUPPLY4) &&
+			(MeasurementType <= XSM_MIN_SUPPLY6)) ||
+			((MeasurementType >= XSM_MAX_SUPPLY7) &&
+			(MeasurementType <= XSM_MAX_TEMP_REMOTE)) ||
+			((MeasurementType >= XSM_MIN_SUPPLY7) &&
+			(MeasurementType <= XSM_MIN_TEMP_REMOTE)));
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read and return the specified Minimum/Maximum measurement. */
+	MinMaxData = (u16) (XSysmonPsu_ReadReg(EffectiveBaseAddress +
+							XSM_MIN_MAX_CH_OFFSET + ((u32)MeasurementType << 2U)));
+
+	return MinMaxData;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the number of samples of averaging that is to be done for
+* all the channels in both the single channel mode and sequence mode of
+* operations.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Average is the number of samples of averaging programmed to the
+*		Configuration Register 0. Use the XSM_AVG_* definitions defined
+*		in xsysmonpsu.h file :
+*		- XSM_AVG_0_SAMPLES for no averaging
+*		- XSM_AVG_16_SAMPLES for 16 samples of averaging
+*		- XSM_AVG_64_SAMPLES for 64 samples of averaging
+*		- XSM_AVG_256_SAMPLES for 256 samples of averaging
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XSysMonPsu_SetAvg(XSysMonPsu *InstancePtr, u8 Average, u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(Average <= XSM_AVG_256_SAMPLES);
+	Xil_AssertVoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Write the averaging value into the Configuration Register 0. */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress + XSYSMONPSU_CFG_REG0_OFFSET)
+						& (u32)(~XSYSMONPSU_CFG_REG0_AVRGNG_MASK);
+	RegValue |= (((u32) Average << XSYSMONPSU_CFG_REG0_AVRGNG_SHIFT));
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_CFG_REG0_OFFSET,
+			 RegValue);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the number of samples of averaging configured for all
+* the channels in the Configuration Register 0.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	The averaging read from the Configuration Register 0 is
+*		returned. Use the XSM_AVG_* bit definitions defined in xsysmonpsu.h
+*		file to interpret the returned value :
+*		- XSM_AVG_0_SAMPLES means no averaging
+*		- XSM_AVG_16_SAMPLES means 16 samples of averaging
+*		- XSM_AVG_64_SAMPLES means 64 samples of averaging
+*		- XSM_AVG_256_SAMPLES means 256 samples of averaging
+*
+* @note		None.
+*
+*****************************************************************************/
+u8 XSysMonPsu_GetAvg(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 Average;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read the averaging value from the Configuration Register 0. */
+	Average = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+				XSYSMONPSU_CFG_REG0_OFFSET) & XSYSMONPSU_CFG_REG0_AVRGNG_MASK;
+
+	return (u8)(Average >> XSYSMONPSU_CFG_REG0_AVRGNG_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*
+* The function sets the given parameters in the Configuration Register 0 in
+* the single channel mode.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Channel is the channel number for conversion. The valid
+*		channels are 0 - 6, 8 - 10, 13 - 37.
+* @param	IncreaseAcqCycles is a boolean parameter which specifies whether
+*		the Acquisition time for the external channels has to be
+*		increased to 10 ADCCLK cycles (specify TRUE) or remain at the
+*		default 4 ADCCLK cycles (specify FALSE). This parameter is
+*		only valid for the external channels.
+* @param	IsEventMode is a boolean parameter that specifies continuous
+*		sampling (specify FALSE) or event driven sampling mode (specify
+*		TRUE) for the given channel.
+* @param	IsDifferentialMode is a boolean parameter which specifies
+*		unipolar(specify FALSE) or differential mode (specify TRUE) for
+*		the analog inputs. The 	input mode is only valid for the
+*		external channels.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return
+*		- XST_SUCCESS if the given values were written successfully to
+*		the Configuration Register 0.
+*		- XST_FAILURE if the channel sequencer is enabled or the input
+*		parameters are not valid for the selected channel.
+*
+* @note
+*		- The number of samples for the averaging for all the channels
+*		is set by using the function XSysMonPsu_SetAvg.
+*		- The calibration of the device is done by doing a ADC
+*		conversion on the calibration channel(channel 8). The input
+*		parameters IncreaseAcqCycles, IsDifferentialMode and
+*		IsEventMode are not valid for this channel.
+*
+*****************************************************************************/
+s32 XSysMonPsu_SetSingleChParams(XSysMonPsu *InstancePtr, u8 Channel,
+				u32 IncreaseAcqCycles, u32 IsEventMode,
+				u32 IsDifferentialMode, u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+	s32 Status;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((Channel <= XSM_CH_SUPPLY3) ||
+			  ((Channel >= XSM_CH_SUPPLY_CALIB) &&
+			  (Channel <= XSM_CH_GAINERR_CALIB)) ||
+			  ((Channel >= XSM_CH_SUPPLY4) &&
+			  (Channel <= XSM_CH_TEMP_REMTE)));
+	Xil_AssertNonvoid((IncreaseAcqCycles == TRUE) ||
+			  (IncreaseAcqCycles == FALSE));
+	Xil_AssertNonvoid((IsEventMode == TRUE) || (IsEventMode == FALSE));
+	Xil_AssertNonvoid((IsDifferentialMode == TRUE) ||
+			  (IsDifferentialMode == FALSE));
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Check if the device is in single channel mode else return failure */
+	if ((XSysMonPsu_GetSequencerMode(InstancePtr, SysmonBlk)
+				!= XSM_SEQ_MODE_SINGCHAN)) {
+		Status = (s32)XST_FAILURE;
+		goto End;
+	}
+
+	/* Read the Configuration Register 0 and extract out Averaging value. */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_CFG_REG0_OFFSET) & XSYSMONPSU_CFG_REG0_AVRGNG_MASK;
+
+	/*
+	 * Select the number of acquisition cycles. The acquisition cycles is
+	 * only valid for the external channels.
+	 */
+	if (IncreaseAcqCycles == TRUE) {
+		if (((Channel >= XSM_CH_AUX_MIN) && (Channel <= XSM_CH_AUX_MAX))
+		    || (Channel == XSM_CH_VPVN)) {
+			RegValue |= XSYSMONPSU_CFG_REG0_ACQ_MASK;
+		} else {
+			Status = (s32)XST_FAILURE;
+			goto End;
+		}
+	}
+
+	/*
+	 * Select the input mode. The input mode is only valid for the
+	 * external channels.
+	 */
+	if (IsDifferentialMode == TRUE) {
+
+		if (((Channel >= XSM_CH_AUX_MIN) && (Channel <= XSM_CH_AUX_MAX))
+		    || (Channel == XSM_CH_VPVN)) {
+			RegValue |= XSYSMONPSU_CFG_REG0_BU_MASK;
+		} else {
+			Status = (s32)XST_FAILURE;
+			goto End;
+		}
+	}
+
+	/* Select the ADC mode. */
+	if (IsEventMode == TRUE) {
+		RegValue |= XSYSMONPSU_CFG_REG0_EC_MASK;
+	}
+
+	/* Write the given values into the Configuration Register 0. */
+	RegValue |= ((u32)Channel & XSYSMONPSU_CFG_REG0_MUX_CH_MASK);
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_CFG_REG0_OFFSET,
+			 RegValue);
+
+	Status = (s32)XST_SUCCESS;
+
+End:
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function enables the alarm outputs for the specified alarms in the
+* Configuration Registers 1:
+*
+*		- OT for Over Temperature (XSYSMONPSU_CFR_REG1_ALRM_OT_MASK)
+*		- ALM0 for On board Temperature (XSYSMONPSU_CFR_REG1_ALRM_TEMP_MASK)
+*		- ALM1 for SUPPLY1 (XSYSMONPSU_CFR_REG1_ALRM_SUPPLY1_MASK)
+*		- ALM2 for SUPPLY2 (XSYSMONPSU_CFR_REG1_ALRM_SUPPLY2_MASK)
+* 		- ALM3 for SUPPLY3 (XSYSMONPSU_CFR_REG1_ALRM_SUPPLY3_MASK)
+* 		- ALM4 for SUPPLY4 (XSYSMONPSU_CFR_REG1_ALRM__SUPPLY4_MASK)
+*		- ALM5 for SUPPLY5 (XSYSMONPSU_CFR_REG1_ALRM_SUPPLY5_MASK)
+* 		- ALM6 for SUPPLY6 (XSYSMONPSU_CFR_REG1_ALRM_SUPPLY6_MASK)
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	AlmEnableMask is the bit-mask of the alarm outputs to be enabled
+*		in the Configuration Register 1.
+*		Bit positions of 1 will be enabled. Bit positions of 0 will be
+*		disabled. This mask is formed by OR'ing XSYSMONPSU_CFR_REG1_ALRM_*_MASK
+*		masks defined in xsysmonpsu.h.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	None.
+*
+* @note		The implementation of the alarm enables in the Configuration
+*		register 1 is such that the alarms for bit positions of 0 will
+*		be enabled and alarms for bit positions of 1 will be disabled.
+*		The alarm outputs specified by the AlmEnableMask are negated
+*		before writing to the Configuration Register 1 because it
+*		was Disable register bits.
+*
+*****************************************************************************/
+void XSysMonPsu_SetAlarmEnables(XSysMonPsu *InstancePtr, u32 AlmEnableMask,
+		u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(AlmEnableMask <= XSYSMONPSU_CFG_REG1_ALRM_ALL_MASK);
+	Xil_AssertVoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG1_OFFSET);
+	RegValue &= (u32)(~XSYSMONPSU_CFG_REG1_ALRM_ALL_MASK);
+	RegValue |= (~AlmEnableMask & (u32)XSYSMONPSU_CFG_REG1_ALRM_ALL_MASK);
+
+	/*
+	 * Enable/disables the alarm enables for the specified alarm bits in the
+	 * Configuration Register 1.
+	 */
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_CFG_REG1_OFFSET,
+			 RegValue);
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the status of the alarm output enables in the
+* Configuration Register 1.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	This is the bit-mask of the enabled alarm outputs in the
+*		Configuration Register 1. Use the masks XSYSMONPSU_CFG_REG1_ALRM_*_MASK
+*		masks defined in xsysmonpsu.h to interpret the returned value.
+*
+*		Bit positions of 1 indicate that the alarm output is enabled.
+*		Bit positions of 0 indicate that the alarm output is disabled.
+*
+*
+* @note		The implementation of the alarm enables in the Configuration
+*		register 1 is such that alarms for the bit positions of 1 will
+*		be disabled and alarms for bit positions of 0 will be enabled.
+*		The enabled alarm outputs returned by this function is the
+*		negated value of the the data read from the Configuration
+*		Register 1.
+*
+*****************************************************************************/
+u32 XSysMonPsu_GetAlarmEnables(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Read the status of alarm output enables from the Configuration
+	 * Register 1.
+	 */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_CFG_REG1_OFFSET) & XSYSMONPSU_CFG_REG1_ALRM_ALL_MASK;
+	RegValue = (~RegValue & XSYSMONPSU_CFG_REG1_ALRM_ALL_MASK);
+
+	return RegValue;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the specified Channel Sequencer Mode in the Configuration
+* Register 1 :
+*		- Default safe mode (XSM_SEQ_MODE_SAFE)
+*		- One pass through sequence (XSM_SEQ_MODE_ONEPASS)
+*		- Continuous channel sequencing (XSM_SEQ_MODE_CONTINPASS)
+*		- Single Channel/Sequencer off (XSM_SEQ_MODE_SINGCHAN)
+*		- Olympus sampling mode (XSM_SEQ_MODE_OYLMPUS)
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SequencerMode is the sequencer mode to be set.
+*		Use XSM_SEQ_MODE_* bits defined in xsysmonpsu.h.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	None.
+*
+* @note		Only one of the modes can be enabled at a time.
+*
+*****************************************************************************/
+void XSysMonPsu_SetSequencerMode(XSysMonPsu *InstancePtr, u8 SequencerMode,
+		u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((SequencerMode <= XSM_SEQ_MODE_SINGCHAN) ||
+			(SequencerMode == XSM_SEQ_MODE_OYLMPUS));
+	Xil_AssertVoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Set the specified sequencer mode in the Configuration Register 1. */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG1_OFFSET);
+	RegValue &= (u32)(~ XSYSMONPSU_CFG_REG1_SEQ_MDE_MASK);
+	RegValue |= (((u32)SequencerMode  << XSYSMONPSU_CFG_REG1_SEQ_MDE_SHIFT) &
+					XSYSMONPSU_CFG_REG1_SEQ_MDE_MASK);
+	XSysmonPsu_WriteReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG1_OFFSET, RegValue);
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the channel sequencer mode from the Configuration
+* Register 1.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	The channel sequencer mode :
+*		- XSM_SEQ_MODE_SAFE : Default safe mode
+*		- XSM_SEQ_MODE_ONEPASS : One pass through sequence
+*		- XSM_SEQ_MODE_CONTINPASS : Continuous channel sequencing
+*		- XSM_SEQ_MODE_SINGCHAN : Single channel/Sequencer off
+*		- XSM_SEQ_MODE_OLYMPUS : Olympus sampling mode
+*
+* @note		None.
+*
+*****************************************************************************/
+u8 XSysMonPsu_GetSequencerMode(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u8 SequencerMode;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read the channel sequencer mode from the Configuration Register 1. */
+	SequencerMode =  ((u8) ((XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_CFG_REG1_OFFSET) & XSYSMONPSU_CFG_REG1_SEQ_MDE_MASK) >>
+			XSYSMONPSU_CFG_REG1_SEQ_MDE_SHIFT));
+
+	return SequencerMode;
+}
+
+/****************************************************************************/
+/**
+*
+* The function enables the Event mode or Continuous mode in the sequencer mode.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	IsEventMode is a boolean parameter that specifies continuous
+*		sampling (specify FALSE) or event driven sampling mode (specify
+*		TRUE) for the channel.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XSysMonPsu_SetSequencerEvent(XSysMonPsu *InstancePtr, u32 IsEventMode,
+		u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((IsEventMode == TRUE) || (IsEventMode == FALSE));
+	Xil_AssertVoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read the Configuration Register 0. */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG0_OFFSET);
+
+	/* Set the ADC mode. */
+	if (IsEventMode == TRUE) {
+		RegValue |= XSYSMONPSU_CFG_REG0_EC_MASK;
+	} else {
+		RegValue &= (u32)(~XSYSMONPSU_CFG_REG0_EC_MASK);
+	}
+
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_CFG_REG0_OFFSET,
+			 RegValue);
+}
+
+/****************************************************************************/
+/**
+*
+* The function returns the mode of the sequencer.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	Returns the Sequencer mode. XSYSMONPSU_EVENT_MODE for Event mode
+* 		and XSYSMONPSU_CONTINUOUS_MODE for continuous mode.
+*
+* @note		None.
+*
+*****************************************************************************/
+s32 XSysMonPsu_GetSequencerEvent(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	s32 Mode;
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read the Configuration Register 0. */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG0_OFFSET);
+
+	RegValue &= XSYSMONPSU_CFG_REG0_EC_MASK;
+
+	if (RegValue == XSYSMONPSU_CFG_REG0_EC_MASK) {
+		Mode = XSYSMONPSU_EVENT_MODE;
+	} else {
+		Mode = XSYSMONPSU_CONTINUOUS_MODE;
+	}
+
+	return Mode;
+}
+
+/****************************************************************************/
+/**
+*
+* The function enables the external mux and connects a channel to the mux.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Channel is the channel number used to connect to the external
+*		Mux. The valid channels are 0 to 5 and 16 to 31.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return
+*		- XST_SUCCESS if the given values were written successfully to
+*		the Configuration Register 0.
+*		- XST_FAILURE if the channel sequencer is enabled or the input
+*		parameters are not valid for the selected channel.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XSysMonPsu_SetExtenalMux(XSysMonPsu *InstancePtr, u8 Channel, u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((Channel <= XSM_CH_VREFN) ||
+			  ((Channel >= XSM_CH_AUX_MIN) &&
+			  (Channel <= XSM_CH_AUX_MAX)));
+	Xil_AssertVoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Read the Configuration Register 0 and the clear the channel selection
+	 * bits.
+	 */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG0_OFFSET);
+	RegValue &= ~(XSYSMONPSU_CFG_REG0_MUX_CH_MASK);
+
+	/* Enable the External Mux and select the channel. */
+	RegValue |= (XSYSMONPSU_CFG_REG0_XTRNL_MUX_MASK | (u32)Channel);
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_CFG_REG0_OFFSET,
+			 RegValue);
+}
+
+/****************************************************************************/
+/**
+*
+* The function returns the external mux channel.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	Returns the channel number used to connect to the external
+*		Mux. The valid channels are 0 to 6, 8 to 16, and 31 to 36..
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XSysMonPsu_GetExtenalMux(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Read the Configuration Register 0 and derive the channel selection
+	 * bits.
+	 */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG0_OFFSET);
+	RegValue &= XSYSMONPSU_CFG_REG0_MUX_CH_MASK;
+
+	return RegValue;
+}
+
+/****************************************************************************/
+/**
+*
+* The function sets the frequency of the ADCCLK by configuring the DCLK to
+* ADCCLK ratio in the Configuration Register #2.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Divisor is clock divisor used to derive ADCCLK from DCLK.
+*		Valid values of the divisor are
+*		PS:
+*		 - 0 means divide by 8.
+*		 - 1,2 means divide by 2.
+*		 - 3 to 255 means divide by that value.
+*       PL:
+*		 - 0,1,2 means divide by 2.
+*		 - 3 to 255 means divide by that value.
+*		Refer to the device specification for more details.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	None.
+*
+* @note		- The ADCCLK is an internal clock used by the ADC and is
+*		synchronized to the DCLK clock. The ADCCLK is equal to DCLK
+*		divided by the user selection in the Configuration Register 2.
+*		- There is no Assert on the minimum value of the Divisor.
+*
+*****************************************************************************/
+void XSysMonPsu_SetAdcClkDivisor(XSysMonPsu *InstancePtr, u8 Divisor,
+            u32 SysmonBlk)
+{
+	u32 RegValue;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Read the Configuration Register 2 and the clear the clock divisor
+	 * bits.
+	 */
+	RegValue = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_CFG_REG2_OFFSET);
+	RegValue &= ~(XSYSMONPSU_CFG_REG2_CLK_DVDR_MASK);
+
+	/* Write the divisor value into the Configuration Register 2. */
+	RegValue |= ((u32)Divisor << XSYSMONPSU_CFG_REG2_CLK_DVDR_SHIFT) &
+					XSYSMONPSU_CFG_REG2_CLK_DVDR_MASK;
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_CFG_REG2_OFFSET,
+			 RegValue);
+
+}
+
+/****************************************************************************/
+/**
+*
+* The function gets the ADCCLK divisor from the Configuration Register 2.
+*
+* @param	InstancePtr is a pointer to the XSysMon instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	The divisor read from the Configuration Register 2.
+*
+* @note		The ADCCLK is an internal clock used by the ADC and is
+*		synchronized to the DCLK clock. The ADCCLK is equal to DCLK
+*		divided by the user selection in the Configuration Register 2.
+*
+*****************************************************************************/
+u8 XSysMonPsu_GetAdcClkDivisor(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u16 Divisor;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Read the divisor value from the Configuration Register 2. */
+	Divisor = (u16) XSysmonPsu_ReadReg(EffectiveBaseAddress +
+							XSYSMONPSU_CFG_REG2_OFFSET);
+
+	return (u8) (Divisor >> XSYSMONPSU_CFG_REG2_CLK_DVDR_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*
+* This function enables the specified channels in the ADC Channel Selection
+* Sequencer Registers. The sequencer must be in the Safe Mode before writing
+* to these registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	ChEnableMask is the bit mask of all the channels to be enabled.
+*		Use XSYSMONPSU_SEQ_CH* defined in xsysmon_hw.h to specify the Channel
+*		numbers. Bit masks of 1 will be enabled and bit mask of 0 will
+*		be disabled.
+*		The ChEnableMask is a 32 bit mask that is written to the two
+*		16 bit ADC Channel Selection Sequencer Registers.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return
+*		- XST_SUCCESS if the given values were written successfully to
+*		the ADC Channel Selection Sequencer Registers.
+*		- XST_FAILURE if the channel sequencer is enabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+s32 XSysMonPsu_SetSeqChEnables(XSysMonPsu *InstancePtr, u32 ChEnableMask,
+		u32 SysmonBlk)
+{
+	s32 Status;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/*
+	 * The sequencer must be in the Default Safe Mode before writing
+	 * to these registers. Return XST_FAILURE if the channel sequencer
+	 * is enabled.
+	 */
+	if ((XSysMonPsu_GetSequencerMode(InstancePtr,SysmonBlk) != XSM_SEQ_MODE_SAFE)) {
+		Status = (s32)XST_FAILURE;
+		goto End;
+	}
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Enable the specified channels in the ADC Channel Selection Sequencer
+	 * Registers.
+	 */
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_SEQ_CH0_OFFSET,
+			 (ChEnableMask & XSYSMONPSU_SEQ_CH0_VALID_MASK));
+
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_SEQ_CH1_OFFSET,
+			 (ChEnableMask >> XSM_SEQ_CH_SHIFT) &
+			 XSYSMONPSU_SEQ_CH1_VALID_MASK);
+
+	Status = (s32)XST_SUCCESS;
+
+End:
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the channel enable bits status from the ADC Channel
+* Selection Sequencer Registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	Gets the channel enable bits. Use XSYSMONPSU_SEQ_CH* defined in
+*		xsysmonpsu_hw.h to interpret the Channel numbers. Bit masks of 1
+*		are the channels that are enabled and bit mask of 0 are
+*		the channels that are disabled.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XSysMonPsu_GetSeqChEnables(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 RegVal;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Read the channel enable bits for all the channels from the ADC
+	 * Channel Selection Register.
+	 */
+	RegVal = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_CH0_OFFSET) & XSYSMONPSU_SEQ_CH0_VALID_MASK;
+	RegVal |= (XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_CH1_OFFSET) & XSYSMONPSU_SEQ_CH1_VALID_MASK) <<
+					XSM_SEQ_CH_SHIFT;
+
+	return RegVal;
+}
+
+/****************************************************************************/
+/**
+*
+* This function enables the averaging for the specified channels in the ADC
+* Channel Averaging Enable Sequencer Registers. The sequencer must be in
+* the Safe Mode before writing to these registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	AvgEnableChMask is the bit mask of all the channels for which
+*		averaging is to be enabled. Use XSYSMONPSU_SEQ_AVERAGE* defined in
+*		xsysmonpsu_hw.h to specify the Channel numbers. Averaging will be
+*		enabled for bit masks of 1 and disabled for bit mask of 0.
+*		The AvgEnableChMask is a 32 bit mask that is written to the
+*		two 16 bit ADC Channel Averaging Enable Sequencer Registers.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return
+*		- XST_SUCCESS if the given values were written successfully to
+*		the ADC Channel Averaging Enables Sequencer Registers.
+*		- XST_FAILURE if the channel sequencer is enabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+s32 XSysMonPsu_SetSeqAvgEnables(XSysMonPsu *InstancePtr, u32 AvgEnableChMask,
+		u32 SysmonBlk)
+{
+	s32 Status;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * The sequencer must be disabled for writing any of these registers.
+	 * Return XST_FAILURE if the channel sequencer is enabled.
+	 */
+	if ((XSysMonPsu_GetSequencerMode(InstancePtr,SysmonBlk)
+	                                     != XSM_SEQ_MODE_SAFE)) {
+		Status = (s32)XST_FAILURE;
+		goto End;
+	}
+
+	/*
+	 * Enable/disable the averaging for the specified channels in the
+	 * ADC Channel Averaging Enables Sequencer Registers.
+	 */
+	XSysmonPsu_WriteReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_AVERAGE0_OFFSET,
+			(AvgEnableChMask & XSYSMONPSU_SEQ_AVERAGE0_MASK));
+
+	XSysmonPsu_WriteReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_AVERAGE1_OFFSET,
+			 (AvgEnableChMask >> XSM_SEQ_CH_SHIFT) &
+			 XSYSMONPSU_SEQ_AVERAGE1_MASK);
+
+	Status = (s32)XST_SUCCESS;
+End:
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the channels for which the averaging has been enabled
+* in the ADC Channel Averaging Enables Sequencer Registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @returns 	The status of averaging (enabled/disabled) for all the channels.
+*		Use XSYSMONPSU_SEQ_AVERAGE* defined in xsysmonpsu_hw.h to interpret the
+*		Channel numbers. Bit masks of 1 are the channels for which
+*		averaging is enabled and bit mask of 0 are the channels for
+*		averaging is disabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XSysMonPsu_GetSeqAvgEnables(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 RegVal;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Read the averaging enable status for all the channels from the
+	 * ADC Channel Averaging Enables Sequencer Registers.
+	 */
+	RegVal = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_AVERAGE0_OFFSET) & XSYSMONPSU_SEQ_AVERAGE0_MASK;
+	RegVal |= (XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_AVERAGE1_OFFSET) & XSYSMONPSU_SEQ_AVERAGE1_MASK) <<
+			XSM_SEQ_CH_SHIFT;
+
+	return RegVal;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the Analog input mode for the specified channels in the
+* ADC Channel Analog-Input Mode Sequencer Registers. The sequencer must be in
+* the Safe Mode before writing to these registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	InputModeChMask is the bit mask of all the channels for which
+*		the input mode is differential mode. Use XSYSMONPSU_SEQ_INPUT_MDE*
+*		defined in xsysmonpsu_hw.h to specify the channel numbers. Differential
+*		or  Bipolar input mode will be set for bit masks of 1 and unipolar input
+*		mode for bit masks of 0.
+*		The InputModeChMask is a 32 bit mask that is written to the two
+*		16 bit ADC Channel Analog-Input Mode Sequencer Registers.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return
+*		- XST_SUCCESS if the given values were written successfully to
+*		the ADC Channel Analog-Input Mode Sequencer Registers.
+*		- XST_FAILURE if the channel sequencer is enabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+s32 XSysMonPsu_SetSeqInputMode(XSysMonPsu *InstancePtr, u32 InputModeChMask,
+		u32 SysmonBlk)
+{
+	s32 Status;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/*
+	 * The sequencer must be in the Safe Mode before writing to
+	 * these registers. Return XST_FAILURE if the channel sequencer
+	 * is enabled.
+	 */
+	if ((XSysMonPsu_GetSequencerMode(InstancePtr,SysmonBlk)
+	                                      != XSM_SEQ_MODE_SAFE)) {
+		Status = (s32)XST_FAILURE;
+		goto End;
+	}
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Set the input mode for the specified channels in the ADC Channel
+	 * Analog-Input Mode Sequencer Registers.
+	 */
+	XSysmonPsu_WriteReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_INPUT_MDE0_OFFSET,
+			 (InputModeChMask & XSYSMONPSU_SEQ_INPUT_MDE0_MASK));
+
+	XSysmonPsu_WriteReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_INPUT_MDE1_OFFSET,
+			 (InputModeChMask >> XSM_SEQ_CH_SHIFT) &
+			 XSYSMONPSU_SEQ_INPUT_MDE1_MASK);
+
+	Status = (s32)XST_SUCCESS;
+
+End:
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the Analog input mode for all the channels from
+* the ADC Channel Analog-Input Mode Sequencer Registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @returns 	The input mode for all the channels.
+*		Use XSYSMONPSU_SEQ_INPUT_MDE* defined in xsysmonpsu_hw.h to interpret the
+*		Channel numbers. Bit masks of 1 are the channels for which
+*		input mode is differential/Bipolar and bit mask of 0 are the channels
+*		for which input mode is unipolar.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XSysMonPsu_GetSeqInputMode(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 InputMode;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 *  Get the input mode for all the channels from the ADC Channel
+	 * Analog-Input Mode Sequencer Registers.
+	 */
+	InputMode = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_INPUT_MDE0_OFFSET) & XSYSMONPSU_SEQ_INPUT_MDE0_MASK;
+	InputMode |= (XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_SEQ_INPUT_MDE1_OFFSET) & XSYSMONPSU_SEQ_INPUT_MDE1_MASK) <<
+				XSM_SEQ_CH_SHIFT;
+
+	return InputMode;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the number of Acquisition cycles in the ADC Channel
+* Acquisition Time Sequencer Registers. The sequencer must be in the Safe Mode
+* before writing to these registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	AcqCyclesChMask is the bit mask of all the channels for which
+*		the number of acquisition cycles is to be extended.
+*		Use XSYSMONPSU_SEQ_ACQ* defined in xsysmonpsu_hw.h to specify the Channel
+*		numbers. Acquisition cycles will be extended to 10 ADCCLK cycles
+*		for bit masks of 1 and will be the default 4 ADCCLK cycles for
+*		bit masks of 0.
+*		The AcqCyclesChMask is a 32 bit mask that is written to the two
+*		16 bit ADC Channel Acquisition Time Sequencer Registers.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return
+*		- XST_SUCCESS if the given values were written successfully to
+*		the Channel Sequencer Registers.
+*		- XST_FAILURE if the channel sequencer is enabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+s32 XSysMonPsu_SetSeqAcqTime(XSysMonPsu *InstancePtr, u32 AcqCyclesChMask,
+		u32 SysmonBlk)
+{
+	s32 Status;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/*
+	 * The sequencer must be in the Safe Mode before writing
+	 * to these registers. Return XST_FAILURE if the channel
+	 * sequencer is enabled.
+	 */
+	if ((XSysMonPsu_GetSequencerMode(InstancePtr,SysmonBlk)
+	                                     != XSM_SEQ_MODE_SAFE)) {
+		Status = (s32)XST_FAILURE;
+		goto End;
+	}
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Set the Acquisition time for the specified channels in the
+	 * ADC Channel Acquisition Time Sequencer Registers.
+	 */
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_SEQ_ACQ0_OFFSET,
+			 (AcqCyclesChMask & XSYSMONPSU_SEQ_ACQ0_MASK));
+
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_SEQ_ACQ1_OFFSET,
+			 (AcqCyclesChMask >> XSM_SEQ_CH_SHIFT) & XSYSMONPSU_SEQ_ACQ1_MASK);
+
+	Status = (s32)XST_SUCCESS;
+
+End:
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the status of acquisition time from the ADC Channel Acquisition
+* Time Sequencer Registers.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @returns 	The acquisition time for all the channels.
+*		Use XSYSMONPSU_SEQ_ACQ* defined in xsysmonpsu_hw.h to interpret the
+*		Channel numbers. Bit masks of 1 are the channels for which
+*		acquisition cycles are extended and bit mask of 0 are the
+*		channels for which acquisition cycles are not extended.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XSysMonPsu_GetSeqAcqTime(XSysMonPsu *InstancePtr, u32 SysmonBlk)
+{
+	u32 RegValAcq;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Get the Acquisition cycles for the specified channels from the ADC
+	 * Channel Acquisition Time Sequencer Registers.
+	 */
+	RegValAcq = XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_SEQ_ACQ0_OFFSET) & XSYSMONPSU_SEQ_ACQ0_MASK;
+	RegValAcq |= (XSysmonPsu_ReadReg(EffectiveBaseAddress +
+					XSYSMONPSU_SEQ_ACQ1_OFFSET) & XSYSMONPSU_SEQ_ACQ1_MASK) <<
+					XSM_SEQ_CH_SHIFT;
+
+	return RegValAcq;
+}
+
+/****************************************************************************/
+/**
+*
+* This functions sets the contents of the given Alarm Threshold Register.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	AlarmThrReg is the index of an Alarm Threshold Register to
+*		be set. Use XSM_ATR_* constants defined in xsysmonpsu.h to
+*		specify the index.
+* @param	Value is the 16-bit threshold value to write into the register.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XSysMonPsu_SetAlarmThreshold(XSysMonPsu *InstancePtr, u8 AlarmThrReg,
+		u16 Value, u32 SysmonBlk)
+{
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((AlarmThrReg <= XSM_ATR_TEMP_RMTE_UPPER) ||
+			((AlarmThrReg >= XSM_ATR_SUP7_LOWER) &&
+			(AlarmThrReg <= XSM_ATR_TEMP_RMTE_LOWER)));
+	Xil_AssertVoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/* Write the value into the specified Alarm Threshold Register. */
+	XSysmonPsu_WriteReg(EffectiveBaseAddress + XSYSMONPSU_ALRM_TEMP_UPR_OFFSET +
+			((u32)AlarmThrReg << 2U), Value);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the contents of the specified Alarm Threshold Register.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	AlarmThrReg is the index of an Alarm Threshold Register
+*		to be read. Use XSM_ATR_* constants defined in xsysmonpsu.h
+*		to specify the index.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon
+*       block or PL Sysmon block register region.
+*
+* @return	A 16-bit value representing the contents of the selected Alarm
+*		Threshold Register.
+*
+* @note		None.
+*
+*****************************************************************************/
+u16 XSysMonPsu_GetAlarmThreshold(XSysMonPsu *InstancePtr, u8 AlarmThrReg,
+		u32 SysmonBlk)
+{
+	u16 AlarmThreshold;
+	u32 EffectiveBaseAddress;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((AlarmThrReg <= XSM_ATR_TEMP_RMTE_UPPER) ||
+			((AlarmThrReg >= XSM_ATR_SUP7_LOWER) &&
+			(AlarmThrReg <= XSM_ATR_TEMP_RMTE_LOWER)));
+	Xil_AssertNonvoid((SysmonBlk == XSYSMON_PS)||(SysmonBlk == XSYSMON_PL));
+
+	/* Calculate the effective baseaddress based on the Sysmon instance. */
+	EffectiveBaseAddress =
+			XSysMonPsu_GetEffBaseAddress(InstancePtr->Config.BaseAddress,
+					SysmonBlk);
+
+	/*
+	 * Read the specified Alarm Threshold Register and return
+	 * the value.
+	 */
+	AlarmThreshold = (u16) XSysmonPsu_ReadReg(EffectiveBaseAddress +
+			XSYSMONPSU_ALRM_TEMP_UPR_OFFSET + ((u32)AlarmThrReg << 2));
+
+	return AlarmThreshold;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the conversion to be automatic for PS SysMon.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+*
+* @return	None
+*
+* @note		In the auto-trigger mode, sample rate is of 1 Million samples.
+*
+*****************************************************************************/
+void XSysMonPsu_SetPSAutoConversion(XSysMonPsu *InstancePtr)
+{
+	u32 PSSysMonStatusReg;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Set the automatic conversion triggering in PS control register. */
+	PSSysMonStatusReg = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+			XSYSMONPSU_PS_SYSMON_CSTS_OFFSET);
+	PSSysMonStatusReg |= XSYSMONPSU_PS_SYSMON_CSTS_AUTO_CONVST_MASK;
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress +
+			XSYSMONPSU_PS_SYSMON_CSTS_OFFSET, PSSysMonStatusReg);
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the AMS monitor status.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+*
+* @return	Returns the monitor status. See XSYSMONPSU_MON_STS_*_MASK
+* 		definations present in xsysmonpsu_hw.h for knowing the status.
+*
+* @note		None
+* .
+*****************************************************************************/
+u32 XSysMonPsu_GetMonitorStatus(XSysMonPsu *InstancePtr)
+{
+	u32 AMSMonStatusReg;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the AMS monitor status. This gives tells about JTAG Locked / ADC
+	 * busy / ADC Current Channel number and its ADC output.
+	 */
+	AMSMonStatusReg = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+			XSYSMONPSU_MON_STS_OFFSET);
+
+	return AMSMonStatusReg;
+}
+
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu.h
new file mode 100644
index 000000000..ae55db9ce
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu.h
@@ -0,0 +1,592 @@
+/******************************************************************************
+*
+* Copyright (C) 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+* @file xsysmonpsu.h
+*
+* The XSysMon driver supports the Xilinx System Monitor device.
+*
+* The System Monitor device has the following features:
+*	- PL Sysmon instance has 10-bit, 200-KSPS (kilo samples per second)
+*		Analog-to-Digital Converter (ADC)
+*	- PS Sysmon instance has 10-bit, 1000-KSPS ADC.
+*	- Monitoring of on-chip supply voltages and temperature
+*	- 1 dedicated differential analog-input pair and
+*	  16 auxiliary differential analog-input pairs
+*	- Automatic alarms based on user defined limits for the on-chip
+*	  supply voltages and temperature
+*	- Automatic Channel Sequencer, programmable averaging, programmable
+*	  acquisition time for the external inputs, unipolar or differential
+*	  input selection for the external inputs
+*	- Inbuilt Calibration
+*	- Optional interrupt request generation
+*	- External Mux
+*
+*
+* The user should refer to the hardware device specification for detailed
+* information about the device.
+*
+* This header file contains the prototypes of driver functions that can
+* be used to access the System Monitor device.
+*
+*
+*  System Monitor Channel Sequencer Modes 
+*
+* The  System Monitor Channel Sequencer supports the following operating modes:
+*
+*   -  Default : This is the default mode after power up.
+*		In this mode of operation the System Monitor operates in
+*		a sequence mode, monitoring the on chip sensors:
+*		Temperature, VCCINT, and VCCAUX.
+*   -  One pass through sequence : In this mode the System Monitor
+*		converts the channels enabled in the Sequencer Channel Enable
+*		registers for a single pass and then stops.
+*   -  Continuous cycling of sequence : In this mode the System Monitor
+*		converts the channels enabled in the Sequencer Channel Enable
+*		registers continuously.
+*   -  Single channel mode: In this mode the System Monitor Channel
+*		Sequencer is disabled and the System Monitor operates in a
+*		Single Channel Mode.
+*		The System Monitor can operate either in a Continuous or Event
+*		driven sampling mode in the single channel mode.
+*
+*
+*  Initialization and Configuration 
+*
+* The device driver enables higher layer software (e.g., an application) to
+* communicate to the System Monitor device.
+*
+* XSysMonPsu_CfgInitialize() API is used to initialize the System Monitor
+* device. The user needs to first call the XSysMonPsu_LookupConfig() API which
+* returns the Configuration structure pointer which is passed as a parameter to
+* the XSysMonPsu_CfgInitialize() API.
+*
+*
+* Interrupts
+*
+* The System Monitor device supports interrupt driven mode and the default
+* operation mode is polling mode.
+*
+* This driver does not provide a Interrupt Service Routine (ISR) for the device.
+* It is the responsibility of the application to provide one if needed. Refer to
+* the interrupt example provided with this driver for details on using the
+* device in interrupt mode.
+*
+*
+*  Virtual Memory 
+*
+* This driver supports Virtual Memory. The RTOS is responsible for calculating
+* the correct device base address in Virtual Memory space.
+*
+*
+*  Threads 
+*
+* This driver is not thread safe. Any needs for threads or thread mutual
+* exclusion must be satisfied by the layer above this driver.
+*
+*
+*  Asserts 
+*
+* Asserts are used within all Xilinx drivers to enforce constraints on argument
+* values. Asserts can be turned off on a system-wide basis by defining, at
+* compile time, the NDEBUG identifier. By default, asserts are turned on and it
+* is recommended that users leave asserts on during development.
+*
+*
+*  Building the driver 
+*
+* The XSysMonPsu driver is composed of several source files. This allows the user
+* to build and link only those parts of the driver that are necessary.
+*
+*
+*  Limitations of the driver 
+*
+* System Monitor device can be accessed through the JTAG port and the AXI
+* interface. The driver implementation does not support the simultaneous access
+* of the device by both these interfaces. The user has to take care of this
+* situation in the user application code.
+*
+*
+*
+* 


+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.00  kvn    12/15/15 First release
+*              02/15/16 Corrected Assert function call in
+*                       XSysMonPsu_GetMonitorStatus API.
+*              03/03/16 Added Temperature remote channel for Setsingle
+*                       channel API. Also corrected external mux channel
+*                       numbers.
+*
+* 

+*
+******************************************************************************/
+
+
+#ifndef XSYSMONPSU_H_			/* prevent circular inclusions */
+#define XSYSMONPSU_H_			/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+#include "xsysmonpsu_hw.h"
+#include "xil_types.h"
+
+/************************** Constant Definitions *****************************/
+
+/**
+ * @name Indexes for the different channels.
+ * @{
+ */
+#define XSM_CH_TEMP 		0x0U  /**< On Chip Temperature */
+#define XSM_CH_SUPPLY1		0x1U  /**< SUPPLY1 VCC_PSINTLP */
+#define XSM_CH_SUPPLY2		0x2U  /**< SUPPLY2 VCC_PSINTFP */
+#define XSM_CH_VPVN 		0x3U  /**< VP/VN Dedicated analog inputs */
+#define XSM_CH_VREFP		0x4U  /**< VREFP */
+#define XSM_CH_VREFN		0x5U  /**< VREFN */
+#define XSM_CH_SUPPLY3		0x6U  /**< SUPPLY3 VCC_PSAUX */
+#define XSM_CH_SUPPLY_CALIB	0x08U /**< Supply Calib Data Reg */
+#define XSM_CH_ADC_CALIB	0x09U /**< ADC Offset Channel Reg */
+#define XSM_CH_GAINERR_CALIB 	0x0AU /**< Gain Error Channel Reg  */
+#define XSM_CH_SUPPLY4		0x0DU /**< SUPPLY4 VCC_PSDDR_504 */
+#define XSM_CH_SUPPLY5		0x0EU /**< SUPPLY5 VCC_PSIO3_503 */
+#define XSM_CH_SUPPLY6		0x0FU /**< SUPPLY6 VCC_PSIO0_500 */
+#define XSM_CH_AUX_MIN		16U   /**< Channel number for 1st Aux Channel */
+#define XSM_CH_AUX_MAX		31U   /**< Channel number for Last Aux channel */
+#define XSM_CH_SUPPLY7      32U   /**< SUPPLY7 VCC_PSIO1_501 */
+#define XSM_CH_SUPPLY8      33U   /**< SUPPLY8 VCC_PSIO2_502 */
+#define XSM_CH_SUPPLY9      34U   /**< SUPPLY9 PS_MGTRAVCC */
+#define XSM_CH_SUPPLY10     35U   /**< SUPPLY10 PS_MGTRAVTT */
+#define XSM_CH_VCCAMS       36U   /**< VCCAMS */
+#define XSM_CH_TEMP_REMTE   37U   /**< Temperature Remote */
+#define XSM_CH_VCC_PSLL0    38U   /**< VCC_PSLL0 */
+#define XSM_CH_VCC_PSLL1    39U   /**< VCC_PSLL1 */
+#define XSM_CH_VCC_PSLL2    40U   /**< VCC_PSLL2 */
+#define XSM_CH_VCC_PSLL3    41U   /**< VCC_PSLL3 */
+#define XSM_CH_VCC_PSLL4    42U   /**< VCC_PSLL4 */
+#define XSM_CH_VCC_PSBATT   43U   /**< VCC_PSBATT */
+#define XSM_CH_VCCINT       44U   /**< VCCINT */
+#define XSM_CH_VCCBRAM      45U   /**< VCCBRAM */
+#define XSM_CH_VCCAUX       46U   /**< VCCAUX */
+#define XSM_CH_VCC_PSDDRPLL 47U   /**< VCC_PSDDRPLL */
+#define XSM_CH_DDRPHY_VREF  48U   /**< DDRPHY_VREF */
+#define XSM_CH_DDRPHY_AT0   49U   /**< DDRPHY_AT0 */
+#define XSM_CH_PSGT_AT0     50U   /**< PSGT_AT0 */
+#define XSM_CH_PSGT_AT1     51U   /**< PSGT_AT0 */
+#define XSM_CH_RESERVE0     52U   /**< PSGT_AT0 */
+#define XSM_CH_RESERVE1     53U   /**< PSGT_AT0 */
+
+/*@}*/
+
+/**
+ * @name Indexes for reading the Calibration Coefficient Data.
+ * @{
+ */
+#define XSM_CALIB_SUPPLY_OFFSET_COEFF 0U /**< Supply Offset Calib Coefficient */
+#define XSM_CALIB_ADC_OFFSET_COEFF    1U /**< ADC Offset Calib Coefficient */
+#define XSM_CALIB_GAIN_ERROR_COEFF    2U /**< Gain Error Calib Coefficient*/
+
+/*@}*/
+
+/**
+ * @name Indexes for reading the Minimum/Maximum Measurement Data.
+ * @{
+ */
+#define XSM_MAX_TEMP		0U    /**< Maximum Temperature Data */
+#define XSM_MAX_SUPPLY1		1U    /**< Maximum SUPPLY1 Data */
+#define XSM_MAX_SUPPLY2		2U    /**< Maximum SUPPLY2 Data */
+#define XSM_MAX_SUPPLY3		3U    /**< Maximum SUPPLY3 Data */
+#define XSM_MIN_TEMP		4U    /**< Minimum Temperature Data */
+#define XSM_MIN_SUPPLY1		5U    /**< Minimum SUPPLY1 Data */
+#define XSM_MIN_SUPPLY2     6U    /**< Minimum SUPPLY2 Data */
+#define XSM_MIN_SUPPLY3     7U    /**< Minimum SUPPLY3 Data */
+#define XSM_MAX_SUPPLY4		8U    /**< Maximum SUPPLY4 Data */
+#define XSM_MAX_SUPPLY5		9U    /**< Maximum SUPPLY5 Data */
+#define XSM_MAX_SUPPLY6		0xAU  /**< Maximum SUPPLY6 Data */
+#define XSM_MIN_SUPPLY4     0xCU  /**< Minimum SUPPLY4 Data */
+#define XSM_MIN_SUPPLY5     0xDU  /**< Minimum SUPPLY5 Data */
+#define XSM_MIN_SUPPLY6     0xEU  /**< Minimum SUPPLY6 Data */
+#define XSM_MAX_SUPPLY7		0x80U  /**< Maximum SUPPLY7 Data */
+#define XSM_MAX_SUPPLY8		0x81U  /**< Maximum SUPPLY8 Data */
+#define XSM_MAX_SUPPLY9		0x82U  /**< Maximum SUPPLY9 Data */
+#define XSM_MAX_SUPPLY10	0x83U  /**< Maximum SUPPLY10 Data */
+#define XSM_MAX_VCCAMS  	0x84U  /**< Maximum VCCAMS Data */
+#define XSM_MAX_TEMP_REMOTE  	0x85U  /**< Maximum Remote Temperature Data */
+#define XSM_MIN_SUPPLY7     0x88U  /**< Minimum SUPPLY7 Data */
+#define XSM_MIN_SUPPLY8     0x89U  /**< Minimum SUPPLY8 Data */
+#define XSM_MIN_SUPPLY9     0x8AU  /**< Minimum SUPPLY9 Data */
+#define XSM_MIN_SUPPLY10    0x8BU  /**< Minimum SUPPLY10 Data */
+#define XSM_MIN_VCCAMS      0x8CU  /**< Minimum VCCAMS Data */
+#define XSM_MIN_TEMP_REMOTE     0x8DU  /**< Minimum Remote Temperature Data */
+
+/*@}*/
+
+/**
+ * @name Averaging to be done for the channels.
+ * @{
+ */
+#define XSM_AVG_0_SAMPLES	0U /**< No Averaging */
+#define XSM_AVG_16_SAMPLES	1U /**< Average 16 samples */
+#define XSM_AVG_64_SAMPLES	2U /**< Average 64 samples */
+#define XSM_AVG_256_SAMPLES	3U /**< Average 256 samples */
+
+/*@}*/
+
+/**
+ * @name Channel Sequencer Modes of operation.
+ * @{
+ */
+#define XSM_SEQ_MODE_SAFE	 0U /**< Default Safe Mode */
+#define XSM_SEQ_MODE_ONEPASS	 1U /**< Onepass through Sequencer */
+#define XSM_SEQ_MODE_CONTINPASS	 2U /**< Continuous Cycling Seqquencer */
+#define XSM_SEQ_MODE_SINGCHAN	 3U /**< Single channel - No Sequencing */
+#define XSM_SEQ_MODE_OYLMPUS	 6U /**< Olympus mode */
+
+/*@}*/
+
+/**
+ * @name Clock Divisor values range.
+ * @{
+ */
+#define XSM_CLK_DIV_MIN	 0U /**< Minimum Clock Divisor value */
+#define XSM_CLK_DIV_MAX	 255U /**< Maximum Clock Divisor value */
+
+/*@}*/
+
+/**
+ * @name Alarm Threshold(Limit) Register (ATR) indexes.
+ * @{
+ */
+#define XSM_ATR_TEMP_UPPER	 0U   /**< High user Temperature limit */
+#define XSM_ATR_SUP1_UPPER	 1U   /**< Supply1 high voltage limit */
+#define XSM_ATR_SUP2_UPPER	 2U   /**< Supply2 high voltage limit */
+#define XSM_ATR_OT_UPPER	 3U   /**< Upper Over Temperature limit */
+#define XSM_ATR_TEMP_LOWER	 4U   /**< Low user Temperature */
+#define XSM_ATR_SUP1_LOWER	 5U   /**< Suuply1 low voltage limit */
+#define XSM_ATR_SUP2_LOWER	 6U   /**< Supply2 low voltage limit */
+#define XSM_ATR_OT_LOWER	 7U   /**< Lower Over Temperature limit */
+#define XSM_ATR_SUP3_UPPER	 8U   /**< Supply3 high voltage limit */
+#define XSM_ATR_SUP4_UPPER 	 9U   /**< Supply4 high voltage limit */
+#define XSM_ATR_SUP5_UPPER 	 0xAU /**< Supply5 high voltage limit */
+#define XSM_ATR_SUP6_UPPER 	 0xBU /**< Supply6 high voltage limit */
+#define XSM_ATR_SUP3_LOWER	 0xCU /**< Supply3 low voltage limit */
+#define XSM_ATR_SUP4_LOWER 	 0xDU /**< Supply4 low voltage limit */
+#define XSM_ATR_SUP5_LOWER 	 0xEU /**< Supply5 low voltage limit */
+#define XSM_ATR_SUP6_LOWER 	 0xFU /**< Supply6 low voltage limit */
+#define XSM_ATR_SUP7_UPPER	 0x10U /**< Supply7 high voltage limit */
+#define XSM_ATR_SUP8_UPPER	 0x11U /**< Supply8 high voltage limit */
+#define XSM_ATR_SUP9_UPPER	 0x12U /**< Supply9 high voltage limit */
+#define XSM_ATR_SUP10_UPPER	 0x13U /**< Supply10 high voltage limit */
+#define XSM_ATR_VCCAMS_UPPER	 0x14U /**< VCCAMS high voltage limit */
+#define XSM_ATR_TEMP_RMTE_UPPER	 0x15U /**< High remote Temperature limit */
+#define XSM_ATR_SUP7_LOWER	 0x18U /**< Supply7 low voltage limit */
+#define XSM_ATR_SUP8_LOWER	 0x19U /**< Supply8 low voltage limit */
+#define XSM_ATR_SUP9_LOWER	 0x1AU /**< Supply9 low voltage limit */
+#define XSM_ATR_SUP10_LOWER	 0x1BU /**< Supply10 low voltage limit */
+#define XSM_ATR_VCCAMS_LOWER	 0x1CU /**< VCCAMS low voltage limit */
+#define XSM_ATR_TEMP_RMTE_LOWER	 0x1DU /**< Low remote Temperature limit */
+
+/*@}*/
+
+/**
+ * @name Alarm masks for channels in Configuration registers 1
+ * @{
+ */
+#define XSM_CFR_ALM_SUPPLY6_MASK	0x0800 /**< Alarm 6 - SUPPLY6 */
+#define XSM_CFR_ALM_SUPPLY5_MASK	0x0400 /**< Alarm 5 - SUPPLY5 */
+#define XSM_CFR_ALM_SUPPLY4_MASK	0x0200 /**< Alarm 4 - SUPPLY4 */
+#define XSM_CFR_ALM_SUPPLY3_MASK 	0x0100 /**< Alarm 3 - SUPPLY3 */
+#define XSM_CFR_ALM_SUPPLY2_MASK	0x0008 /**< Alarm 2 - SUPPLY2 */
+#define XSM_CFR_ALM_SUPPLY1_MASK	0x0004 /**< Alarm 1 - SUPPLY1 */
+#define XSM_CFR_ALM_TEMP_MASK		0x0002 /**< Alarm 0 - Temperature */
+#define XSM_CFR_ALM_OT_MASK		0x0001 /**< Over Temperature Alarm */
+
+/*@}*/
+
+/**************************** Type Definitions *******************************/
+
+/******************************************************************************/
+/**
+ * This data type defines a handler that an application defines to communicate
+ * with interrupt system to retrieve state information about an application.
+ *
+ * @param	CallBackRef is a callback reference passed in by the upper layer
+ *		when setting the handler, and is passed back to the upper layer
+ *		when the handler is called. It is used to find the device driver
+ *		instance.
+ *
+ ******************************************************************************/
+typedef void (*XSysMonPsu_Handler) (void *CallBackRef);
+
+/**
+ * This typedef contains configuration information for a device.
+ */
+typedef struct {
+	u16 DeviceId;		/**< Unique ID of device */
+	u32 BaseAddress;		/**< Register base address */
+} XSysMonPsu_Config;
+
+/**
+ * The XSysmonPsu driver instance data. The user is required to allocate a
+ * variable of this type for the SYSMON device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+	XSysMonPsu_Config Config; 	/**< Device configuration */
+	u32 IsReady;				/**< Device is initialized and ready */
+	XSysMonPsu_Handler Handler;
+	void *CallBackRef;			/**< Callback reference for event handler */
+} XSysMonPsu;
+
+/* BaseAddress Offsets */
+#define XSYSMON_PS 1U
+#define XSYSMON_PL 2U
+#define XSYSMON_AMS 3U
+#define XPS_BA_OFFSET   0x00000800U
+#define XPL_BA_OFFSET   0x00000C00U
+#define XSM_ADC_CH_OFFSET 0x00000200U
+#define XSM_AMS_CH_OFFSET 0x00000060U
+#define XSM_MIN_MAX_CH_OFFSET 0x00000080U
+
+/************************* Variable Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* This macro converts System Monitor Raw Data to Temperature(centigrades)
+* for On-Chip Sensors.
+*
+* @param	AdcData is the SysMon Raw ADC Data.
+*
+* @return 	The Temperature in centigrades.
+*
+* @note		C-Style signature:
+*		float XSysMon_RawToTemperature_OnChip(u32 AdcData)
+*
+*****************************************************************************/
+#define XSysMonPsu_RawToTemperature_OnChip(AdcData)				\
+	((((float)(AdcData)/65536.0f)/0.00199451786f ) - 273.6777f)
+
+/****************************************************************************/
+/**
+*
+* This macro converts System Monitor Raw Data to Temperature(centigrades)
+* for external reference.
+*
+* @param	AdcData is the SysMon Raw ADC Data.
+*
+* @return 	The Temperature in centigrades.
+*
+* @note		C-Style signature:
+*		float XSysMon_RawToTemperature_ExternalRef(u32 AdcData)
+*
+*****************************************************************************/
+#define XSysMonPsu_RawToTemperature_ExternalRef(AdcData)			\
+	((((float)(AdcData)/65536.0f)/0.00198842814f ) - 273.8195f)
+
+/****************************************************************************/
+/**
+*
+* This macro converts System Monitor Raw Data to Voltage(volts).
+*
+* @param	AdcData is the System Monitor ADC Raw Data.
+*
+* @return 	The Voltage in volts.
+*
+* @note		C-Style signature:
+*		float XSysMon_RawToVoltage(u32 AdcData)
+*
+*****************************************************************************/
+#define XSysMonPsu_RawToVoltage(AdcData) 					\
+	((((float)(AdcData))* (3.0f))/65536.0f)
+
+/****************************************************************************/
+/**
+*
+* This macro converts Temperature in centigrades to System Monitor Raw Data
+* for On-Chip Sensors.
+*
+* @param	Temperature is the Temperature in centigrades to be
+*		converted to System Monitor ADC Raw Data.
+*
+* @return 	The System Monitor ADC Raw Data.
+*
+* @note		C-Style signature:
+*		int XSysMon_TemperatureToRaw_OnChip(float Temperature)
+*
+*****************************************************************************/
+#define XSysMonPsu_TemperatureToRaw_OnChip(Temperature)				\
+	((int)(((Temperature) + 273.6777f)*65536.0f*0.00199451786f))
+
+/****************************************************************************/
+/**
+*
+* This macro converts Temperature in centigrades to System Monitor Raw Data
+* for external reference.
+*
+* @param	Temperature is the Temperature in centigrades to be
+*		converted to System Monitor ADC Raw Data.
+*
+* @return 	The System Monitor ADC Raw Data.
+*
+* @note		C-Style signature:
+*		int XSysMon_TemperatureToRaw_ExternalRef(float Temperature)
+*
+*****************************************************************************/
+#define XSysMonPsu_TemperatureToRaw_ExternalRef(Temperature)		\
+	((int)(((Temperature) + 273.8195f)*65536.0f*0.00198842814f))
+
+/****************************************************************************/
+/**
+*
+* This macro converts Voltage in Volts to System Monitor Raw Data.
+*
+* @param	Voltage is the Voltage in volts to be converted to
+*		System Monitor/ADC Raw Data.
+*
+* @return 	The System Monitor ADC Raw Data.
+*
+* @note		C-Style signature:
+*		int XSysMon_VoltageToRaw(float Voltage)
+*
+*****************************************************************************/
+#define XSysMonPsu_VoltageToRaw(Voltage)			 		\
+	((s32)((Voltage)*65536.0f/3.0f))
+
+/****************************************************************************/
+/**
+*
+* This static inline macro calculates the effective baseaddress based on the
+* Sysmon instance. For PS Sysmon, use additional offset XPS_BA_OFFSET and For
+* PL Sysmon, use additional offset XPL_BA_OFFSET.
+*
+* @param	BaseAddress is the starting address of the SysMon block in
+* 		register database.
+* @param	SysmonBlk is the value that tells whether it is for PS Sysmon block
+*       or PL Sysmon block or the AMS controller register region.
+*
+* @return 	Returns the effective baseaddress of the sysmon instance.
+*
+*****************************************************************************/
+static inline u32 XSysMonPsu_GetEffBaseAddress(u32 BaseAddress, u32 SysmonBlk)
+	{
+		u32 EffBaseAddr;
+
+		if (SysmonBlk == XSYSMON_PS) {
+			EffBaseAddr = BaseAddress + XPS_BA_OFFSET;
+		} else if(SysmonBlk == XSYSMON_PL) {
+			EffBaseAddr = BaseAddress + XPL_BA_OFFSET;
+		} else {
+			EffBaseAddr = BaseAddress;
+		}
+
+		return EffBaseAddr;
+	}
+
+/************************** Function Prototypes ******************************/
+
+/* Functions in xsysmonpsu.c */
+s32 XSysMonPsu_CfgInitialize(XSysMonPsu *InstancePtr, XSysMonPsu_Config *ConfigPtr,
+			  u32 EffectiveAddr);
+void XSysMonPsu_Reset(XSysMonPsu *InstancePtr);
+void XSysMonPsu_Reset_FromLPD(XSysMonPsu *InstancePtr);
+u32 XSysMonPsu_GetStatus(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+void XSysMonPsu_StartAdcConversion(XSysMonPsu *InstancePtr);
+u16 XSysMonPsu_GetAdcData(XSysMonPsu *InstancePtr, u8 Channel, u32 SysmonBlk);
+u16 XSysMonPsu_GetCalibCoefficient(XSysMonPsu *InstancePtr, u8 CoeffType, u32 SysmonBlk);
+u16 XSysMonPsu_GetMinMaxMeasurement(XSysMonPsu *InstancePtr, u8 MeasurementType,
+		u32 SysmonBlk);
+void XSysMonPsu_SetAvg(XSysMonPsu *InstancePtr, u8 Average, u32 SysmonBlk);
+u8 XSysMonPsu_GetAvg(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+s32 XSysMonPsu_SetSingleChParams(XSysMonPsu *InstancePtr, u8 Channel,
+				u32 IncreaseAcqCycles, u32 IsEventMode,
+				u32 IsDifferentialMode, u32 SysmonBlk);
+void XSysMonPsu_SetAlarmEnables(XSysMonPsu *InstancePtr, u32 AlmEnableMask,
+		u32 SysmonBlk);
+u32 XSysMonPsu_GetAlarmEnables(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+void XSysMonPsu_SetSequencerMode(XSysMonPsu *InstancePtr, u8 SequencerMode,
+		u32 SysmonBlk);
+u8 XSysMonPsu_GetSequencerMode(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+void XSysMonPsu_SetSequencerEvent(XSysMonPsu *InstancePtr, u32 IsEventMode,
+		u32 SysmonBlk);
+s32 XSysMonPsu_GetSequencerEvent(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+void XSysMonPsu_SetExtenalMux(XSysMonPsu *InstancePtr, u8 Channel, u32 SysmonBlk);
+u32 XSysMonPsu_GetExtenalMux(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+void XSysMonPsu_SetAdcClkDivisor(XSysMonPsu *InstancePtr, u8 Divisor, u32 SysmonBlk);
+u8 XSysMonPsu_GetAdcClkDivisor(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+s32 XSysMonPsu_SetSeqChEnables(XSysMonPsu *InstancePtr, u32 ChEnableMask,
+		u32 SysmonBlk);
+u32 XSysMonPsu_GetSeqAvgEnables(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+u32 XSysMonPsu_GetSeqChEnables(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+s32 XSysMonPsu_SetSeqAvgEnables(XSysMonPsu *InstancePtr, u32 AvgEnableChMask,
+		u32 SysmonBlk);
+s32 XSysMonPsu_SetSeqInputMode(XSysMonPsu *InstancePtr, u32 InputModeChMask,
+		u32 SysmonBlk);
+u32 XSysMonPsu_GetSeqInputMode(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+s32 XSysMonPsu_SetSeqAcqTime(XSysMonPsu *InstancePtr, u32 AcqCyclesChMask,
+		u32 SysmonBlk);
+u32 XSysMonPsu_GetSeqAcqTime(XSysMonPsu *InstancePtr, u32 SysmonBlk);
+void XSysMonPsu_SetAlarmThreshold(XSysMonPsu *InstancePtr, u8 AlarmThrReg,
+		u16 Value, u32 SysmonBlk);
+u16 XSysMonPsu_GetAlarmThreshold(XSysMonPsu *InstancePtr, u8 AlarmThrReg,
+		u32 SysmonBlk);
+void XSysMonPsu_SetPSAutoConversion(XSysMonPsu *InstancePtr);
+u32 XSysMonPsu_GetMonitorStatus(XSysMonPsu *InstancePtr);
+
+/* interrupt functions in xsysmonpsu_intr.c */
+void XSysMonPsu_IntrEnable(XSysMonPsu *InstancePtr, u64 Mask);
+void XSysMonPsu_IntrDisable(XSysMonPsu *InstancePtr, u64 Mask);
+u64 XSysMonPsu_IntrGetEnabled(XSysMonPsu *InstancePtr);
+u64 XSysMonPsu_IntrGetStatus(XSysMonPsu *InstancePtr);
+void XSysMonPsu_IntrClear(XSysMonPsu *InstancePtr, u64 Mask);
+
+/* Functions in xsysmonpsu_selftest.c */
+s32 XSysMonPsu_SelfTest(XSysMonPsu *InstancePtr);
+
+/* Functions in xsysmonpsu_sinit.c */
+XSysMonPsu_Config *XSysMonPsu_LookupConfig(u16 DeviceId);
+
+
+#endif /* XSYSMONPSU_H_ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_g.c
new file mode 100644
index 000000000..ace39e369
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_g.c
@@ -0,0 +1,55 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xsysmonpsu.h"
+
+/*
+* The configuration table for devices
+*/
+
+XSysMonPsu_Config XSysMonPsu_ConfigTable[] =
+{
+	{
+		XPAR_PSU_AMS_DEVICE_ID,
+		XPAR_PSU_AMS_BASEADDR
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_hw.h
new file mode 100644
index 000000000..3012bf327
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_hw.h
@@ -0,0 +1,2268 @@
+/******************************************************************************
+*
+* Copyright (C) 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsysmonpsu_hw.h
+*
+* This header file contains the identifiers and basic driver functions (or
+* macros) that can be used to access the device. Other driver functions
+* are defined in xsysmonpsu.h.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.0   kvn	  12/15/15 First release
+*
+* 

+*
+******************************************************************************/
+
+#ifndef XSYSMONPSU_HW_H__
+#define XSYSMONPSU_HW_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files ********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+#include "xparameters.h"
+
+/**
+ * XSysmonPsu Base Address
+ */
+#define XSYSMONPSU_BASEADDR      0xFFA50000U
+
+/**
+ * Register: XSysmonPsuMisc
+ */
+#define XSYSMONPSU_MISC_OFFSET   0x00000000U
+#define XSYSMONPSU_MISC_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MISC_SLVERR_EN_DRP_SHIFT   1U
+#define XSYSMONPSU_MISC_SLVERR_EN_DRP_WIDTH   1U
+#define XSYSMONPSU_MISC_SLVERR_EN_DRP_MASK    0x00000002U
+
+#define XSYSMONPSU_MISC_SLVERR_EN_SHIFT   0U
+#define XSYSMONPSU_MISC_SLVERR_EN_WIDTH   1U
+#define XSYSMONPSU_MISC_SLVERR_EN_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuIsr0
+ */
+#define XSYSMONPSU_ISR_0_OFFSET   0x00000010U
+#define XSYSMONPSU_ISR_0_MASK	  0xffffffffU
+#define XSYSMONPSU_ISR_0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_15_SHIFT   31U
+#define XSYSMONPSU_ISR_0_PL_ALM_15_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_15_MASK    0x80000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_14_SHIFT   30U
+#define XSYSMONPSU_ISR_0_PL_ALM_14_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_14_MASK    0x40000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_13_SHIFT   29U
+#define XSYSMONPSU_ISR_0_PL_ALM_13_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_13_MASK    0x20000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_12_SHIFT   28U
+#define XSYSMONPSU_ISR_0_PL_ALM_12_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_12_MASK    0x10000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_11_SHIFT   27U
+#define XSYSMONPSU_ISR_0_PL_ALM_11_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_11_MASK    0x08000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_10_SHIFT   26U
+#define XSYSMONPSU_ISR_0_PL_ALM_10_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_10_MASK    0x04000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_9_SHIFT   25U
+#define XSYSMONPSU_ISR_0_PL_ALM_9_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_9_MASK    0x02000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_8_SHIFT   24U
+#define XSYSMONPSU_ISR_0_PL_ALM_8_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_8_MASK    0x01000000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_7_SHIFT   23U
+#define XSYSMONPSU_ISR_0_PL_ALM_7_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_7_MASK    0x00800000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_6_SHIFT   22U
+#define XSYSMONPSU_ISR_0_PL_ALM_6_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_6_MASK    0x00400000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_5_SHIFT   21U
+#define XSYSMONPSU_ISR_0_PL_ALM_5_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_5_MASK    0x00200000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_4_SHIFT   20U
+#define XSYSMONPSU_ISR_0_PL_ALM_4_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_4_MASK    0x00100000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_3_SHIFT   19U
+#define XSYSMONPSU_ISR_0_PL_ALM_3_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_3_MASK    0x00080000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_2_SHIFT   18U
+#define XSYSMONPSU_ISR_0_PL_ALM_2_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_2_MASK    0x00040000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_1_SHIFT   17U
+#define XSYSMONPSU_ISR_0_PL_ALM_1_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_1_MASK    0x00020000U
+
+#define XSYSMONPSU_ISR_0_PL_ALM_0_SHIFT   16U
+#define XSYSMONPSU_ISR_0_PL_ALM_0_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PL_ALM_0_MASK    0x00010000U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_15_SHIFT   15U
+#define XSYSMONPSU_ISR_0_PS_ALM_15_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_15_MASK    0x00008000U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_14_SHIFT   14U
+#define XSYSMONPSU_ISR_0_PS_ALM_14_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_14_MASK    0x00004000U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_13_SHIFT   13U
+#define XSYSMONPSU_ISR_0_PS_ALM_13_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_13_MASK    0x00002000U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_12_SHIFT   12U
+#define XSYSMONPSU_ISR_0_PS_ALM_12_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_12_MASK    0x00001000U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_11_SHIFT   11U
+#define XSYSMONPSU_ISR_0_PS_ALM_11_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_11_MASK    0x00000800U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_10_SHIFT   10U
+#define XSYSMONPSU_ISR_0_PS_ALM_10_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_10_MASK    0x00000400U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_9_SHIFT   9U
+#define XSYSMONPSU_ISR_0_PS_ALM_9_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_9_MASK    0x00000200U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_8_SHIFT   8U
+#define XSYSMONPSU_ISR_0_PS_ALM_8_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_8_MASK    0x00000100U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_7_SHIFT   7U
+#define XSYSMONPSU_ISR_0_PS_ALM_7_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_7_MASK    0x00000080U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_6_SHIFT   6U
+#define XSYSMONPSU_ISR_0_PS_ALM_6_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_6_MASK    0x00000040U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_5_SHIFT   5U
+#define XSYSMONPSU_ISR_0_PS_ALM_5_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_5_MASK    0x00000020U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_4_SHIFT   4U
+#define XSYSMONPSU_ISR_0_PS_ALM_4_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_4_MASK    0x00000010U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_3_SHIFT   3U
+#define XSYSMONPSU_ISR_0_PS_ALM_3_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_3_MASK    0x00000008U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_2_SHIFT   2U
+#define XSYSMONPSU_ISR_0_PS_ALM_2_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_2_MASK    0x00000004U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_1_SHIFT   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_1_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_1_MASK    0x00000002U
+
+#define XSYSMONPSU_ISR_0_PS_ALM_0_SHIFT   0U
+#define XSYSMONPSU_ISR_0_PS_ALM_0_WIDTH   1U
+#define XSYSMONPSU_ISR_0_PS_ALM_0_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuIsr1
+ */
+#define XSYSMONPSU_ISR_1_OFFSET   0x00000014U
+#define XSYSMONPSU_ISR_1_MASK	  0xe000001fU
+#define XSYSMONPSU_ISR_1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_SHIFT   31U
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_WIDTH   1U
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_MASK    0x80000000U
+
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_PL_SYSMON_SHIFT   30U
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_PL_SYSMON_WIDTH   1U
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_PL_SYSMON_MASK    0x40000000U
+
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_PS_SYSMON_SHIFT   29U
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_PS_SYSMON_WIDTH   1U
+#define XSYSMONPSU_ISR_1_ADD_DECD_ERR_PS_SYSMON_MASK    0x20000000U
+
+#define XSYSMONPSU_ISR_1_EOS_SHIFT   4U
+#define XSYSMONPSU_ISR_1_EOS_WIDTH   1U
+#define XSYSMONPSU_ISR_1_EOS_MASK    0x00000010U
+
+#define XSYSMONPSU_ISR_1_EOC_SHIFT   3U
+#define XSYSMONPSU_ISR_1_EOC_WIDTH   1U
+#define XSYSMONPSU_ISR_1_EOC_MASK    0x00000008U
+
+#define XSYSMONPSU_ISR_1_PL_OT_SHIFT   2U
+#define XSYSMONPSU_ISR_1_PL_OT_WIDTH   1U
+#define XSYSMONPSU_ISR_1_PL_OT_MASK    0x00000004U
+
+#define XSYSMONPSU_ISR_1_PS_LPD_OT_SHIFT   1U
+#define XSYSMONPSU_ISR_1_PS_LPD_OT_WIDTH   1U
+#define XSYSMONPSU_ISR_1_PS_LPD_OT_MASK    0x00000002U
+
+#define XSYSMONPSU_ISR_1_PS_FPD_OT_SHIFT   0U
+#define XSYSMONPSU_ISR_1_PS_FPD_OT_WIDTH   1U
+#define XSYSMONPSU_ISR_1_PS_FPD_OT_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuImr0
+ */
+#define XSYSMONPSU_IMR_0_OFFSET   0x00000018U
+#define XSYSMONPSU_IMR_0_RSTVAL   0xffffffffU
+
+#define XSYSMONPSU_IMR_0_PL_ALM_15_SHIFT   31U
+#define XSYSMONPSU_IMR_0_PL_ALM_15_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_15_MASK    0x80000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_14_SHIFT   30U
+#define XSYSMONPSU_IMR_0_PL_ALM_14_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_14_MASK    0x40000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_13_SHIFT   29U
+#define XSYSMONPSU_IMR_0_PL_ALM_13_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_13_MASK    0x20000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_12_SHIFT   28U
+#define XSYSMONPSU_IMR_0_PL_ALM_12_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_12_MASK    0x10000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_11_SHIFT   27U
+#define XSYSMONPSU_IMR_0_PL_ALM_11_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_11_MASK    0x08000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_10_SHIFT   26U
+#define XSYSMONPSU_IMR_0_PL_ALM_10_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_10_MASK    0x04000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_9_SHIFT   25U
+#define XSYSMONPSU_IMR_0_PL_ALM_9_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_9_MASK    0x02000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_8_SHIFT   24U
+#define XSYSMONPSU_IMR_0_PL_ALM_8_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_8_MASK    0x01000000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_7_SHIFT   23U
+#define XSYSMONPSU_IMR_0_PL_ALM_7_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_7_MASK    0x00800000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_6_SHIFT   22U
+#define XSYSMONPSU_IMR_0_PL_ALM_6_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_6_MASK    0x00400000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_5_SHIFT   21U
+#define XSYSMONPSU_IMR_0_PL_ALM_5_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_5_MASK    0x00200000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_4_SHIFT   20U
+#define XSYSMONPSU_IMR_0_PL_ALM_4_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_4_MASK    0x00100000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_3_SHIFT   19U
+#define XSYSMONPSU_IMR_0_PL_ALM_3_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_3_MASK    0x00080000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_2_SHIFT   18U
+#define XSYSMONPSU_IMR_0_PL_ALM_2_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_2_MASK    0x00040000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_1_SHIFT   17U
+#define XSYSMONPSU_IMR_0_PL_ALM_1_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_1_MASK    0x00020000U
+
+#define XSYSMONPSU_IMR_0_PL_ALM_0_SHIFT   16U
+#define XSYSMONPSU_IMR_0_PL_ALM_0_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PL_ALM_0_MASK    0x00010000U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_15_SHIFT   15U
+#define XSYSMONPSU_IMR_0_PS_ALM_15_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_15_MASK    0x00008000U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_14_SHIFT   14U
+#define XSYSMONPSU_IMR_0_PS_ALM_14_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_14_MASK    0x00004000U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_13_SHIFT   13U
+#define XSYSMONPSU_IMR_0_PS_ALM_13_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_13_MASK    0x00002000U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_12_SHIFT   12U
+#define XSYSMONPSU_IMR_0_PS_ALM_12_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_12_MASK    0x00001000U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_11_SHIFT   11U
+#define XSYSMONPSU_IMR_0_PS_ALM_11_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_11_MASK    0x00000800U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_10_SHIFT   10U
+#define XSYSMONPSU_IMR_0_PS_ALM_10_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_10_MASK    0x00000400U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_9_SHIFT   9U
+#define XSYSMONPSU_IMR_0_PS_ALM_9_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_9_MASK    0x00000200U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_8_SHIFT   8U
+#define XSYSMONPSU_IMR_0_PS_ALM_8_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_8_MASK    0x00000100U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_7_SHIFT   7U
+#define XSYSMONPSU_IMR_0_PS_ALM_7_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_7_MASK    0x00000080U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_6_SHIFT   6U
+#define XSYSMONPSU_IMR_0_PS_ALM_6_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_6_MASK    0x00000040U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_5_SHIFT   5U
+#define XSYSMONPSU_IMR_0_PS_ALM_5_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_5_MASK    0x00000020U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_4_SHIFT   4U
+#define XSYSMONPSU_IMR_0_PS_ALM_4_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_4_MASK    0x00000010U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_3_SHIFT   3U
+#define XSYSMONPSU_IMR_0_PS_ALM_3_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_3_MASK    0x00000008U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_2_SHIFT   2U
+#define XSYSMONPSU_IMR_0_PS_ALM_2_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_2_MASK    0x00000004U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_1_SHIFT   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_1_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_1_MASK    0x00000002U
+
+#define XSYSMONPSU_IMR_0_PS_ALM_0_SHIFT   0U
+#define XSYSMONPSU_IMR_0_PS_ALM_0_WIDTH   1U
+#define XSYSMONPSU_IMR_0_PS_ALM_0_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuImr1
+ */
+#define XSYSMONPSU_IMR_1_OFFSET   0x0000001CU
+#define XSYSMONPSU_IMR_1_RSTVAL   0xe000001fU
+
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_SHIFT   31U
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_WIDTH   1U
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_MASK    0x80000000U
+
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_PL_SYSMON_SHIFT   30U
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_PL_SYSMON_WIDTH   1U
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_PL_SYSMON_MASK    0x40000000U
+
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_PS_SYSMON_SHIFT   29U
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_PS_SYSMON_WIDTH   1U
+#define XSYSMONPSU_IMR_1_ADD_DECD_ERR_PS_SYSMON_MASK    0x20000000U
+
+#define XSYSMONPSU_IMR_1_EOS_SHIFT   4U
+#define XSYSMONPSU_IMR_1_EOS_WIDTH   1U
+#define XSYSMONPSU_IMR_1_EOS_MASK    0x00000010U
+
+#define XSYSMONPSU_IMR_1_EOC_SHIFT   3U
+#define XSYSMONPSU_IMR_1_EOC_WIDTH   1U
+#define XSYSMONPSU_IMR_1_EOC_MASK    0x00000008U
+
+#define XSYSMONPSU_IMR_1_PL_OT_SHIFT   2U
+#define XSYSMONPSU_IMR_1_PL_OT_WIDTH   1U
+#define XSYSMONPSU_IMR_1_PL_OT_MASK    0x00000004U
+
+#define XSYSMONPSU_IMR_1_PS_LPD_OT_SHIFT   1U
+#define XSYSMONPSU_IMR_1_PS_LPD_OT_WIDTH   1U
+#define XSYSMONPSU_IMR_1_PS_LPD_OT_MASK    0x00000002U
+
+#define XSYSMONPSU_IMR_1_PS_FPD_OT_SHIFT   0U
+#define XSYSMONPSU_IMR_1_PS_FPD_OT_WIDTH   1U
+#define XSYSMONPSU_IMR_1_PS_FPD_OT_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuIer0
+ */
+#define XSYSMONPSU_IER_0_OFFSET   0x00000020U
+#define XSYSMONPSU_IXR_0_MASK     0xFFFFFFFFU
+#define XSYSMONPSU_IER_0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_15_SHIFT   31U
+#define XSYSMONPSU_IER_0_PL_ALM_15_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_15_MASK    0x80000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_14_SHIFT   30U
+#define XSYSMONPSU_IER_0_PL_ALM_14_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_14_MASK    0x40000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_13_SHIFT   29U
+#define XSYSMONPSU_IER_0_PL_ALM_13_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_13_MASK    0x20000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_12_SHIFT   28U
+#define XSYSMONPSU_IER_0_PL_ALM_12_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_12_MASK    0x10000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_11_SHIFT   27U
+#define XSYSMONPSU_IER_0_PL_ALM_11_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_11_MASK    0x08000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_10_SHIFT   26U
+#define XSYSMONPSU_IER_0_PL_ALM_10_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_10_MASK    0x04000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_9_SHIFT   25U
+#define XSYSMONPSU_IER_0_PL_ALM_9_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_9_MASK    0x02000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_8_SHIFT   24U
+#define XSYSMONPSU_IER_0_PL_ALM_8_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_8_MASK    0x01000000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_7_SHIFT   23U
+#define XSYSMONPSU_IER_0_PL_ALM_7_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_7_MASK    0x00800000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_6_SHIFT   22U
+#define XSYSMONPSU_IER_0_PL_ALM_6_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_6_MASK    0x00400000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_5_SHIFT   21U
+#define XSYSMONPSU_IER_0_PL_ALM_5_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_5_MASK    0x00200000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_4_SHIFT   20U
+#define XSYSMONPSU_IER_0_PL_ALM_4_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_4_MASK    0x00100000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_3_SHIFT   19U
+#define XSYSMONPSU_IER_0_PL_ALM_3_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_3_MASK    0x00080000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_2_SHIFT   18U
+#define XSYSMONPSU_IER_0_PL_ALM_2_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_2_MASK    0x00040000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_1_SHIFT   17U
+#define XSYSMONPSU_IER_0_PL_ALM_1_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_1_MASK    0x00020000U
+
+#define XSYSMONPSU_IER_0_PL_ALM_0_SHIFT   16U
+#define XSYSMONPSU_IER_0_PL_ALM_0_WIDTH   1U
+#define XSYSMONPSU_IER_0_PL_ALM_0_MASK    0x00010000U
+
+#define XSYSMONPSU_IER_0_PS_ALM_15_SHIFT   15U
+#define XSYSMONPSU_IER_0_PS_ALM_15_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_15_MASK    0x00008000U
+
+#define XSYSMONPSU_IER_0_PS_ALM_14_SHIFT   14U
+#define XSYSMONPSU_IER_0_PS_ALM_14_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_14_MASK    0x00004000U
+
+#define XSYSMONPSU_IER_0_PS_ALM_13_SHIFT   13U
+#define XSYSMONPSU_IER_0_PS_ALM_13_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_13_MASK    0x00002000U
+
+#define XSYSMONPSU_IER_0_PS_ALM_12_SHIFT   12U
+#define XSYSMONPSU_IER_0_PS_ALM_12_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_12_MASK    0x00001000U
+
+#define XSYSMONPSU_IER_0_PS_ALM_11_SHIFT   11U
+#define XSYSMONPSU_IER_0_PS_ALM_11_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_11_MASK    0x00000800U
+
+#define XSYSMONPSU_IER_0_PS_ALM_10_SHIFT   10U
+#define XSYSMONPSU_IER_0_PS_ALM_10_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_10_MASK    0x00000400U
+
+#define XSYSMONPSU_IER_0_PS_ALM_9_SHIFT   9U
+#define XSYSMONPSU_IER_0_PS_ALM_9_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_9_MASK    0x00000200U
+
+#define XSYSMONPSU_IER_0_PS_ALM_8_SHIFT   8U
+#define XSYSMONPSU_IER_0_PS_ALM_8_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_8_MASK    0x00000100U
+
+#define XSYSMONPSU_IER_0_PS_ALM_7_SHIFT   7U
+#define XSYSMONPSU_IER_0_PS_ALM_7_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_7_MASK    0x00000080U
+
+#define XSYSMONPSU_IER_0_PS_ALM_6_SHIFT   6U
+#define XSYSMONPSU_IER_0_PS_ALM_6_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_6_MASK    0x00000040U
+
+#define XSYSMONPSU_IER_0_PS_ALM_5_SHIFT   5U
+#define XSYSMONPSU_IER_0_PS_ALM_5_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_5_MASK    0x00000020U
+
+#define XSYSMONPSU_IER_0_PS_ALM_4_SHIFT   4U
+#define XSYSMONPSU_IER_0_PS_ALM_4_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_4_MASK    0x00000010U
+
+#define XSYSMONPSU_IER_0_PS_ALM_3_SHIFT   3U
+#define XSYSMONPSU_IER_0_PS_ALM_3_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_3_MASK    0x00000008U
+
+#define XSYSMONPSU_IER_0_PS_ALM_2_SHIFT   2U
+#define XSYSMONPSU_IER_0_PS_ALM_2_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_2_MASK    0x00000004U
+
+#define XSYSMONPSU_IER_0_PS_ALM_1_SHIFT   1U
+#define XSYSMONPSU_IER_0_PS_ALM_1_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_1_MASK    0x00000002U
+
+#define XSYSMONPSU_IER_0_PS_ALM_0_SHIFT   0U
+#define XSYSMONPSU_IER_0_PS_ALM_0_WIDTH   1U
+#define XSYSMONPSU_IER_0_PS_ALM_0_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuIer1
+ */
+#define XSYSMONPSU_IER_1_OFFSET   0x00000024U
+#define XSYSMONPSU_IXR_1_MASK     0xE000001FU
+#define XSYSMONPSU_IER_1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_SHIFT   31U
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_WIDTH   1U
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_MASK    0x80000000U
+
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_PL_SYSMON_SHIFT   30U
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_PL_SYSMON_WIDTH   1U
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_PL_SYSMON_MASK    0x40000000U
+
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_PS_SYSMON_SHIFT   29U
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_PS_SYSMON_WIDTH   1U
+#define XSYSMONPSU_IER_1_ADD_DECD_ERR_PS_SYSMON_MASK    0x20000000U
+
+#define XSYSMONPSU_IER_1_EOS_SHIFT   4U
+#define XSYSMONPSU_IER_1_EOS_WIDTH   1U
+#define XSYSMONPSU_IER_1_EOS_MASK    0x00000010U
+
+#define XSYSMONPSU_IER_1_EOC_SHIFT   3U
+#define XSYSMONPSU_IER_1_EOC_WIDTH   1U
+#define XSYSMONPSU_IER_1_EOC_MASK    0x00000008U
+
+#define XSYSMONPSU_IER_1_PL_OT_SHIFT   2U
+#define XSYSMONPSU_IER_1_PL_OT_WIDTH   1U
+#define XSYSMONPSU_IER_1_PL_OT_MASK    0x00000004U
+
+#define XSYSMONPSU_IER_1_PS_LPD_OT_SHIFT   1U
+#define XSYSMONPSU_IER_1_PS_LPD_OT_WIDTH   1U
+#define XSYSMONPSU_IER_1_PS_LPD_OT_MASK    0x00000002U
+
+#define XSYSMONPSU_IER_1_PS_FPD_OT_SHIFT   0U
+#define XSYSMONPSU_IER_1_PS_FPD_OT_WIDTH   1U
+#define XSYSMONPSU_IER_1_PS_FPD_OT_MASK    0x00000001U
+
+#define XSYSMONPSU_IXR_1_SHIFT  32U
+
+/**
+ * Register: XSysmonPsuIdr0
+ */
+#define XSYSMONPSU_IDR_0_OFFSET   0x00000028U
+#define XSYSMONPSU_IDR_0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_15_SHIFT   31U
+#define XSYSMONPSU_IDR_0_PL_ALM_15_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_15_MASK    0x80000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_14_SHIFT   30U
+#define XSYSMONPSU_IDR_0_PL_ALM_14_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_14_MASK    0x40000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_13_SHIFT   29U
+#define XSYSMONPSU_IDR_0_PL_ALM_13_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_13_MASK    0x20000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_12_SHIFT   28U
+#define XSYSMONPSU_IDR_0_PL_ALM_12_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_12_MASK    0x10000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_11_SHIFT   27U
+#define XSYSMONPSU_IDR_0_PL_ALM_11_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_11_MASK    0x08000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_10_SHIFT   26U
+#define XSYSMONPSU_IDR_0_PL_ALM_10_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_10_MASK    0x04000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_9_SHIFT   25U
+#define XSYSMONPSU_IDR_0_PL_ALM_9_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_9_MASK    0x02000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_8_SHIFT   24U
+#define XSYSMONPSU_IDR_0_PL_ALM_8_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_8_MASK    0x01000000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_7_SHIFT   23U
+#define XSYSMONPSU_IDR_0_PL_ALM_7_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_7_MASK    0x00800000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_6_SHIFT   22U
+#define XSYSMONPSU_IDR_0_PL_ALM_6_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_6_MASK    0x00400000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_5_SHIFT   21U
+#define XSYSMONPSU_IDR_0_PL_ALM_5_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_5_MASK    0x00200000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_4_SHIFT   20U
+#define XSYSMONPSU_IDR_0_PL_ALM_4_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_4_MASK    0x00100000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_3_SHIFT   19U
+#define XSYSMONPSU_IDR_0_PL_ALM_3_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_3_MASK    0x00080000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_2_SHIFT   18U
+#define XSYSMONPSU_IDR_0_PL_ALM_2_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_2_MASK    0x00040000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_1_SHIFT   17U
+#define XSYSMONPSU_IDR_0_PL_ALM_1_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_1_MASK    0x00020000U
+
+#define XSYSMONPSU_IDR_0_PL_ALM_0_SHIFT   16U
+#define XSYSMONPSU_IDR_0_PL_ALM_0_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PL_ALM_0_MASK    0x00010000U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_15_SHIFT   15U
+#define XSYSMONPSU_IDR_0_PS_ALM_15_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_15_MASK    0x00008000U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_14_SHIFT   14U
+#define XSYSMONPSU_IDR_0_PS_ALM_14_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_14_MASK    0x00004000U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_13_SHIFT   13U
+#define XSYSMONPSU_IDR_0_PS_ALM_13_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_13_MASK    0x00002000U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_12_SHIFT   12U
+#define XSYSMONPSU_IDR_0_PS_ALM_12_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_12_MASK    0x00001000U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_11_SHIFT   11U
+#define XSYSMONPSU_IDR_0_PS_ALM_11_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_11_MASK    0x00000800U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_10_SHIFT   10U
+#define XSYSMONPSU_IDR_0_PS_ALM_10_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_10_MASK    0x00000400U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_9_SHIFT   9U
+#define XSYSMONPSU_IDR_0_PS_ALM_9_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_9_MASK    0x00000200U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_8_SHIFT   8U
+#define XSYSMONPSU_IDR_0_PS_ALM_8_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_8_MASK    0x00000100U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_7_SHIFT   7U
+#define XSYSMONPSU_IDR_0_PS_ALM_7_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_7_MASK    0x00000080U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_6_SHIFT   6U
+#define XSYSMONPSU_IDR_0_PS_ALM_6_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_6_MASK    0x00000040U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_5_SHIFT   5U
+#define XSYSMONPSU_IDR_0_PS_ALM_5_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_5_MASK    0x00000020U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_4_SHIFT   4U
+#define XSYSMONPSU_IDR_0_PS_ALM_4_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_4_MASK    0x00000010U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_3_SHIFT   3U
+#define XSYSMONPSU_IDR_0_PS_ALM_3_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_3_MASK    0x00000008U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_2_SHIFT   2U
+#define XSYSMONPSU_IDR_0_PS_ALM_2_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_2_MASK    0x00000004U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_1_SHIFT   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_1_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_1_MASK    0x00000002U
+
+#define XSYSMONPSU_IDR_0_PS_ALM_0_SHIFT   0U
+#define XSYSMONPSU_IDR_0_PS_ALM_0_WIDTH   1U
+#define XSYSMONPSU_IDR_0_PS_ALM_0_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuIdr1
+ */
+#define XSYSMONPSU_IDR_1_OFFSET   0x0000002CU
+#define XSYSMONPSU_IDR_1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_SHIFT   31U
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_WIDTH   1U
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_MASK    0x80000000U
+
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_PL_SYSMON_SHIFT   30U
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_PL_SYSMON_WIDTH   1U
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_PL_SYSMON_MASK    0x40000000U
+
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_PS_SYSMON_SHIFT   29U
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_PS_SYSMON_WIDTH   1U
+#define XSYSMONPSU_IDR_1_ADD_DECD_ERR_PS_SYSMON_MASK    0x20000000U
+
+#define XSYSMONPSU_IDR_1_EOS_SHIFT   4U
+#define XSYSMONPSU_IDR_1_EOS_WIDTH   1U
+#define XSYSMONPSU_IDR_1_EOS_MASK    0x00000010U
+
+#define XSYSMONPSU_IDR_1_EOC_SHIFT   3U
+#define XSYSMONPSU_IDR_1_EOC_WIDTH   1U
+#define XSYSMONPSU_IDR_1_EOC_MASK    0x00000008U
+
+#define XSYSMONPSU_IDR_1_PL_OT_SHIFT   2U
+#define XSYSMONPSU_IDR_1_PL_OT_WIDTH   1U
+#define XSYSMONPSU_IDR_1_PL_OT_MASK    0x00000004U
+
+#define XSYSMONPSU_IDR_1_PS_LPD_OT_SHIFT   1U
+#define XSYSMONPSU_IDR_1_PS_LPD_OT_WIDTH   1U
+#define XSYSMONPSU_IDR_1_PS_LPD_OT_MASK    0x00000002U
+
+#define XSYSMONPSU_IDR_1_PS_FPD_OT_SHIFT   0U
+#define XSYSMONPSU_IDR_1_PS_FPD_OT_WIDTH   1U
+#define XSYSMONPSU_IDR_1_PS_FPD_OT_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuPsSysmonSts
+ */
+#define XSYSMONPSU_PS_SYSMON_CSTS_OFFSET   0x00000040U
+#define XSYSMONPSU_PS_SYSMON_CSTS_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_STE_SHIFT   24U
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_STE_WIDTH   4U
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_STE_MASK    0x0f000000U
+
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_DNE_SHIFT   16U
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_DNE_WIDTH   1U
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_DNE_MASK    0x00010000U
+
+#define XSYSMONPSU_PS_SYSMON_CSTS_AUTO_CONVST_SHIFT   3U
+#define XSYSMONPSU_PS_SYSMON_CSTS_AUTO_CONVST_WIDTH   1U
+#define XSYSMONPSU_PS_SYSMON_CSTS_AUTO_CONVST_MASK    0x00000008U
+
+#define XSYSMONPSU_PS_SYSMON_CSTS_CONVST_SHIFT   2U
+#define XSYSMONPSU_PS_SYSMON_CSTS_CONVST_WIDTH   1U
+#define XSYSMONPSU_PS_SYSMON_CSTS_CONVST_MASK    0x00000004U
+
+#define XSYSMONPSU_PS_SYSMON_CSTS_RST_USR_SHIFT   1U
+#define XSYSMONPSU_PS_SYSMON_CSTS_RST_USR_WIDTH   1U
+#define XSYSMONPSU_PS_SYSMON_CSTS_RST_USR_MASK    0x00000002U
+
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_TRIG_SHIFT   0U
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_TRIG_WIDTH   1U
+#define XSYSMONPSU_PS_SYSMON_CSTS_STRTUP_TRIG_MASK    0x00000001U
+
+#define XSYSMONPSU_PS_SYSMON_READY 0x08010000U
+
+/**
+ * Register: XSysmonPsuPlSysmonSts
+ */
+#define XSYSMONPSU_PL_SYSMON_CSTS_OFFSET   0x00000044U
+#define XSYSMONPSU_PL_SYSMON_CSTS_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_PL_SYSMON_CSTS_ACESBLE_SHIFT   0U
+#define XSYSMONPSU_PL_SYSMON_CSTS_ACESBLE_WIDTH   1U
+#define XSYSMONPSU_PL_SYSMON_CSTS_ACESBLE_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuMonSts
+ */
+#define XSYSMONPSU_MON_STS_OFFSET   0x00000050U
+#define XSYSMONPSU_MON_STS_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MON_STS_JTAG_LCKD_SHIFT   23U
+#define XSYSMONPSU_MON_STS_JTAG_LCKD_WIDTH   1U
+#define XSYSMONPSU_MON_STS_JTAG_LCKD_MASK    0x00800000U
+
+#define XSYSMONPSU_MON_STS_BSY_SHIFT   22U
+#define XSYSMONPSU_MON_STS_BSY_WIDTH   1U
+#define XSYSMONPSU_MON_STS_BSY_MASK    0x00400000U
+
+#define XSYSMONPSU_MON_STS_CH_SHIFT   16U
+#define XSYSMONPSU_MON_STS_CH_WIDTH   6U
+#define XSYSMONPSU_MON_STS_CH_MASK    0x003f0000U
+
+#define XSYSMONPSU_MON_STS_DATA_SHIFT   0U
+#define XSYSMONPSU_MON_STS_DATA_WIDTH   16U
+#define XSYSMONPSU_MON_STS_DATA_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccPspll0
+ */
+#define XSYSMONPSU_VCC_PSPLL0_OFFSET   0x00000060U
+#define XSYSMONPSU_VCC_PSPLL0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCC_PSPLL0_VAL_SHIFT   0U
+#define XSYSMONPSU_VCC_PSPLL0_VAL_WIDTH   16U
+#define XSYSMONPSU_VCC_PSPLL0_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccPspll1
+ */
+#define XSYSMONPSU_VCC_PSPLL1_OFFSET   0x00000064U
+#define XSYSMONPSU_VCC_PSPLL1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCC_PSPLL1_VAL_SHIFT   0U
+#define XSYSMONPSU_VCC_PSPLL1_VAL_WIDTH   16U
+#define XSYSMONPSU_VCC_PSPLL1_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccPspll2
+ */
+#define XSYSMONPSU_VCC_PSPLL2_OFFSET   0x00000068U
+#define XSYSMONPSU_VCC_PSPLL2_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCC_PSPLL2_VAL_SHIFT   0U
+#define XSYSMONPSU_VCC_PSPLL2_VAL_WIDTH   16U
+#define XSYSMONPSU_VCC_PSPLL2_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccPspll3
+ */
+#define XSYSMONPSU_VCC_PSPLL3_OFFSET   0x0000006CU
+#define XSYSMONPSU_VCC_PSPLL3_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCC_PSPLL3_VAL_SHIFT   0U
+#define XSYSMONPSU_VCC_PSPLL3_VAL_WIDTH   16U
+#define XSYSMONPSU_VCC_PSPLL3_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccPspll4
+ */
+#define XSYSMONPSU_VCC_PSPLL4_OFFSET   0x00000070U
+#define XSYSMONPSU_VCC_PSPLL4_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCC_PSPLL4_VAL_SHIFT   0U
+#define XSYSMONPSU_VCC_PSPLL4_VAL_WIDTH   16U
+#define XSYSMONPSU_VCC_PSPLL4_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccPsbatt
+ */
+#define XSYSMONPSU_VCC_PSBATT_OFFSET   0x00000074U
+#define XSYSMONPSU_VCC_PSBATT_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCC_PSBATT_VAL_SHIFT   0U
+#define XSYSMONPSU_VCC_PSBATT_VAL_WIDTH   16U
+#define XSYSMONPSU_VCC_PSBATT_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccint
+ */
+#define XSYSMONPSU_VCCINT_OFFSET   0x00000078U
+#define XSYSMONPSU_VCCINT_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCCINT_VAL_SHIFT   0U
+#define XSYSMONPSU_VCCINT_VAL_WIDTH   16U
+#define XSYSMONPSU_VCCINT_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccbram
+ */
+#define XSYSMONPSU_VCCBRAM_OFFSET   0x0000007CU
+#define XSYSMONPSU_VCCBRAM_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCCBRAM_VAL_SHIFT   0U
+#define XSYSMONPSU_VCCBRAM_VAL_WIDTH   16U
+#define XSYSMONPSU_VCCBRAM_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccaux
+ */
+#define XSYSMONPSU_VCCAUX_OFFSET   0x00000080U
+#define XSYSMONPSU_VCCAUX_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCCAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VCCAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VCCAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccPsddrpll
+ */
+#define XSYSMONPSU_VCC_PSDDRPLL_OFFSET   0x00000084U
+#define XSYSMONPSU_VCC_PSDDRPLL_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCC_PSDDRPLL_VAL_SHIFT   0U
+#define XSYSMONPSU_VCC_PSDDRPLL_VAL_WIDTH   16U
+#define XSYSMONPSU_VCC_PSDDRPLL_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuDdrphyVref
+ */
+#define XSYSMONPSU_DDRPHY_VREF_OFFSET   0x00000088U
+#define XSYSMONPSU_DDRPHY_VREF_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_DDRPHY_VREF_VAL_SHIFT   0U
+#define XSYSMONPSU_DDRPHY_VREF_VAL_WIDTH   16U
+#define XSYSMONPSU_DDRPHY_VREF_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuDdrphyAto
+ */
+#define XSYSMONPSU_DDRPHY_ATO_OFFSET   0x0000008CU
+#define XSYSMONPSU_DDRPHY_ATO_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_DDRPHY_ATO_VAL_SHIFT   0U
+#define XSYSMONPSU_DDRPHY_ATO_VAL_WIDTH   16U
+#define XSYSMONPSU_DDRPHY_ATO_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuPsgtAt0
+ */
+#define XSYSMONPSU_PSGT_AT0_OFFSET   0x00000090U
+#define XSYSMONPSU_PSGT_AT0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_PSGT_AT0_VAL_SHIFT   0U
+#define XSYSMONPSU_PSGT_AT0_VAL_WIDTH   16U
+#define XSYSMONPSU_PSGT_AT0_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuPsgtAt1
+ */
+#define XSYSMONPSU_PSGT_AT1_OFFSET   0x00000094U
+#define XSYSMONPSU_PSGT_AT1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_PSGT_AT1_VAL_SHIFT   0U
+#define XSYSMONPSU_PSGT_AT1_VAL_WIDTH   16U
+#define XSYSMONPSU_PSGT_AT1_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuReserve0
+ */
+#define XSYSMONPSU_RESERVE0_OFFSET   0x00000098U
+#define XSYSMONPSU_RESERVE0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_RESERVE0_VAL_SHIFT   0U
+#define XSYSMONPSU_RESERVE0_VAL_WIDTH   16U
+#define XSYSMONPSU_RESERVE0_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuReserve1
+ */
+#define XSYSMONPSU_RESERVE1_OFFSET   0x0000009CU
+#define XSYSMONPSU_RESERVE1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_RESERVE1_VAL_SHIFT   0U
+#define XSYSMONPSU_RESERVE1_VAL_WIDTH   16U
+#define XSYSMONPSU_RESERVE1_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuTemp
+ */
+#define XSYSMONPSU_TEMP_OFFSET   0x00000000U
+#define XSYSMONPSU_TEMP_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_TEMP_SHIFT   0U
+#define XSYSMONPSU_TEMP_WIDTH   16U
+#define XSYSMONPSU_TEMP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup1
+ */
+#define XSYSMONPSU_SUP1_OFFSET   0x00000004U
+#define XSYSMONPSU_SUP1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP1_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP1_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP1_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup2
+ */
+#define XSYSMONPSU_SUP2_OFFSET   0x00000008U
+#define XSYSMONPSU_SUP2_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP2_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP2_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP2_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVpVn
+ */
+#define XSYSMONPSU_VP_VN_OFFSET   0x0000000CU
+#define XSYSMONPSU_VP_VN_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VP_VN_SHIFT   0U
+#define XSYSMONPSU_VP_VN_WIDTH   16U
+#define XSYSMONPSU_VP_VN_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVrefp
+ */
+#define XSYSMONPSU_VREFP_OFFSET   0x00000010U
+#define XSYSMONPSU_VREFP_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VREFP_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_VREFP_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_VREFP_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVrefn
+ */
+#define XSYSMONPSU_VREFN_OFFSET   0x00000014U
+#define XSYSMONPSU_VREFN_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VREFN_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_VREFN_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_VREFN_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup3
+ */
+#define XSYSMONPSU_SUP3_OFFSET   0x00000018U
+#define XSYSMONPSU_SUP3_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP3_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP3_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP3_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuCalSupOff
+ */
+#define XSYSMONPSU_CAL_SUP_OFF_OFFSET   0x00000020U
+#define XSYSMONPSU_CAL_SUP_OFF_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_CAL_SUP_OFF_VAL_SHIFT   0U
+#define XSYSMONPSU_CAL_SUP_OFF_VAL_WIDTH   16U
+#define XSYSMONPSU_CAL_SUP_OFF_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuCalAdcBiplrOff
+ */
+#define XSYSMONPSU_CAL_ADC_BIPLR_OFF_OFFSET   0x00000024U
+#define XSYSMONPSU_CAL_ADC_BIPLR_OFF_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_CAL_ADC_BIPLR_OFF_VAL_SHIFT   0U
+#define XSYSMONPSU_CAL_ADC_BIPLR_OFF_VAL_WIDTH   16U
+#define XSYSMONPSU_CAL_ADC_BIPLR_OFF_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuCalGainErr
+ */
+#define XSYSMONPSU_CAL_GAIN_ERR_OFFSET   0x00000028U
+#define XSYSMONPSU_CAL_GAIN_ERR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_CAL_GAIN_ERR_VAL_SHIFT   0U
+#define XSYSMONPSU_CAL_GAIN_ERR_VAL_WIDTH   16U
+#define XSYSMONPSU_CAL_GAIN_ERR_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup4
+ */
+#define XSYSMONPSU_SUP4_OFFSET   0x00000034U
+#define XSYSMONPSU_SUP4_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP4_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP4_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP4_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup5
+ */
+#define XSYSMONPSU_SUP5_OFFSET   0x00000038U
+#define XSYSMONPSU_SUP5_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP5_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP5_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP5_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup6
+ */
+#define XSYSMONPSU_SUP6_OFFSET   0x0000003CU
+#define XSYSMONPSU_SUP6_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP6_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP6_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP6_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux00
+ */
+#define XSYSMONPSU_VAUX00_OFFSET   0x00000040U
+#define XSYSMONPSU_VAUX00_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX00_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX00_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX00_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux01
+ */
+#define XSYSMONPSU_VAUX01_OFFSET   0x00000044U
+#define XSYSMONPSU_VAUX01_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX01_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX01_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX01_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux02
+ */
+#define XSYSMONPSU_VAUX02_OFFSET   0x00000048U
+#define XSYSMONPSU_VAUX02_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX02_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX02_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX02_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux03
+ */
+#define XSYSMONPSU_VAUX03_OFFSET   0x0000004CU
+#define XSYSMONPSU_VAUX03_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX03_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX03_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX03_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux04
+ */
+#define XSYSMONPSU_VAUX04_OFFSET   0x00000050U
+#define XSYSMONPSU_VAUX04_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX04_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX04_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX04_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux05
+ */
+#define XSYSMONPSU_VAUX05_OFFSET   0x00000054U
+#define XSYSMONPSU_VAUX05_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX05_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX05_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX05_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux06
+ */
+#define XSYSMONPSU_VAUX06_OFFSET   0x00000058U
+#define XSYSMONPSU_VAUX06_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX06_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX06_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX06_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux07
+ */
+#define XSYSMONPSU_VAUX07_OFFSET   0x0000005CU
+#define XSYSMONPSU_VAUX07_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX07_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX07_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX07_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux08
+ */
+#define XSYSMONPSU_VAUX08_OFFSET   0x00000060U
+#define XSYSMONPSU_VAUX08_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX08_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX08_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX08_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux09
+ */
+#define XSYSMONPSU_VAUX09_OFFSET   0x00000064U
+#define XSYSMONPSU_VAUX09_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX09_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX09_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX09_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux0a
+ */
+#define XSYSMONPSU_VAUX0A_OFFSET   0x00000068U
+#define XSYSMONPSU_VAUX0A_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX0A_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX0A_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX0A_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux0b
+ */
+#define XSYSMONPSU_VAUX0B_OFFSET   0x0000006CU
+#define XSYSMONPSU_VAUX0B_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX0B_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX0B_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX0B_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux0c
+ */
+#define XSYSMONPSU_VAUX0C_OFFSET   0x00000070U
+#define XSYSMONPSU_VAUX0C_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX0C_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX0C_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX0C_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux0d
+ */
+#define XSYSMONPSU_VAUX0D_OFFSET   0x00000074U
+#define XSYSMONPSU_VAUX0D_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX0D_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX0D_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX0D_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux0e
+ */
+#define XSYSMONPSU_VAUX0E_OFFSET   0x00000078U
+#define XSYSMONPSU_VAUX0E_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX0E_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX0E_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX0E_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVaux0f
+ */
+#define XSYSMONPSU_VAUX0F_OFFSET   0x0000007CU
+#define XSYSMONPSU_VAUX0F_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VAUX0F_VAUX_VAL_SHIFT   0U
+#define XSYSMONPSU_VAUX0F_VAUX_VAL_WIDTH   16U
+#define XSYSMONPSU_VAUX0F_VAUX_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxTemp
+ */
+#define XSYSMONPSU_MAX_TEMP_OFFSET   0x00000080U
+#define XSYSMONPSU_MAX_TEMP_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_TEMP_SHIFT   0U
+#define XSYSMONPSU_MAX_TEMP_WIDTH   16U
+#define XSYSMONPSU_MAX_TEMP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup1
+ */
+#define XSYSMONPSU_MAX_SUP1_OFFSET   0x00000084U
+#define XSYSMONPSU_MAX_SUP1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP1_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP1_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP1_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup2
+ */
+#define XSYSMONPSU_MAX_SUP2_OFFSET   0x00000088U
+#define XSYSMONPSU_MAX_SUP2_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP2_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP2_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP2_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup3
+ */
+#define XSYSMONPSU_MAX_SUP3_OFFSET   0x0000008CU
+#define XSYSMONPSU_MAX_SUP3_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP3_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP3_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP3_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinTemp
+ */
+#define XSYSMONPSU_MIN_TEMP_OFFSET   0x00000090U
+#define XSYSMONPSU_MIN_TEMP_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_TEMP_SHIFT   0U
+#define XSYSMONPSU_MIN_TEMP_WIDTH   16U
+#define XSYSMONPSU_MIN_TEMP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup1
+ */
+#define XSYSMONPSU_MIN_SUP1_OFFSET   0x00000094U
+#define XSYSMONPSU_MIN_SUP1_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP1_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP1_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP1_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup2
+ */
+#define XSYSMONPSU_MIN_SUP2_OFFSET   0x00000098U
+#define XSYSMONPSU_MIN_SUP2_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP2_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP2_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP2_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup3
+ */
+#define XSYSMONPSU_MIN_SUP3_OFFSET   0x0000009CU
+#define XSYSMONPSU_MIN_SUP3_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP3_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP3_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP3_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup4
+ */
+#define XSYSMONPSU_MAX_SUP4_OFFSET   0x000000A0U
+#define XSYSMONPSU_MAX_SUP4_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP4_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP4_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP4_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup5
+ */
+#define XSYSMONPSU_MAX_SUP5_OFFSET   0x000000A4U
+#define XSYSMONPSU_MAX_SUP5_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP5_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP5_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP5_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup6
+ */
+#define XSYSMONPSU_MAX_SUP6_OFFSET   0x000000A8U
+#define XSYSMONPSU_MAX_SUP6_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP6_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP6_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP6_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup4
+ */
+#define XSYSMONPSU_MIN_SUP4_OFFSET   0x000000B0U
+#define XSYSMONPSU_MIN_SUP4_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP4_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP4_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP4_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup5
+ */
+#define XSYSMONPSU_MIN_SUP5_OFFSET   0x000000B4U
+#define XSYSMONPSU_MIN_SUP5_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP5_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP5_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP5_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup6
+ */
+#define XSYSMONPSU_MIN_SUP6_OFFSET   0x000000B8U
+#define XSYSMONPSU_MIN_SUP6_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP6_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP6_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP6_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuStsFlag
+ */
+#define XSYSMONPSU_STS_FLAG_OFFSET   0x000000FCU
+#define XSYSMONPSU_STS_FLAG_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_STS_FLAG_CLK_OSC_USED_SHIFT   15U
+#define XSYSMONPSU_STS_FLAG_CLK_OSC_USED_WIDTH   1U
+#define XSYSMONPSU_STS_FLAG_CLK_OSC_USED_MASK    0x00008000U
+
+#define XSYSMONPSU_STS_FLAG_BLK_IN_RST_SHIFT   14U
+#define XSYSMONPSU_STS_FLAG_BLK_IN_RST_WIDTH   1U
+#define XSYSMONPSU_STS_FLAG_BLK_IN_RST_MASK    0x00004000U
+
+#define XSYSMONPSU_STS_FLAG_JTAG_DISD_SHIFT   11U
+#define XSYSMONPSU_STS_FLAG_JTAG_DISD_WIDTH   1U
+#define XSYSMONPSU_STS_FLAG_JTAG_DISD_MASK    0x00000800U
+
+#define XSYSMONPSU_STS_FLAG_JTAG_RD_ONLY_SHIFT   10U
+#define XSYSMONPSU_STS_FLAG_JTAG_RD_ONLY_WIDTH   1U
+#define XSYSMONPSU_STS_FLAG_JTAG_RD_ONLY_MASK    0x00000400U
+
+#define XSYSMONPSU_STS_FLAG_INTRNL_REF_SHIFT   9U
+#define XSYSMONPSU_STS_FLAG_INTRNL_REF_WIDTH   1U
+#define XSYSMONPSU_STS_FLAG_INTRNL_REF_MASK    0x00000200U
+
+#define XSYSMONPSU_STS_FLAG_DISD_SHIFT   8U
+#define XSYSMONPSU_STS_FLAG_DISD_WIDTH   1U
+#define XSYSMONPSU_STS_FLAG_DISD_MASK    0x00000100U
+
+#define XSYSMONPSU_STS_FLAG_ALM_6_3_SHIFT   4U
+#define XSYSMONPSU_STS_FLAG_ALM_6_3_WIDTH   4U
+#define XSYSMONPSU_STS_FLAG_ALM_6_3_MASK    0x000000f0U
+
+#define XSYSMONPSU_STS_FLAG_OT_SHIFT   3U
+#define XSYSMONPSU_STS_FLAG_OT_WIDTH   1U
+#define XSYSMONPSU_STS_FLAG_OT_MASK    0x00000008U
+
+#define XSYSMONPSU_STS_FLAG_ALM_2_0_SHIFT   0U
+#define XSYSMONPSU_STS_FLAG_ALM_2_0_WIDTH   3U
+#define XSYSMONPSU_STS_FLAG_ALM_2_0_MASK    0x00000007U
+
+/**
+ * Register: XSysmonPsuCfgReg0
+ */
+#define XSYSMONPSU_CFG_REG0_OFFSET   0x00000100U
+#define XSYSMONPSU_CFG_REG0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_CFG_REG0_AVRGNG_SHIFT   12U
+#define XSYSMONPSU_CFG_REG0_AVRGNG_WIDTH   2U
+#define XSYSMONPSU_CFG_REG0_AVRGNG_MASK    0x00003000U
+
+#define XSYSMONPSU_CFG_REG0_XTRNL_MUX_SHIFT   11U
+#define XSYSMONPSU_CFG_REG0_XTRNL_MUX_WIDTH   1U
+#define XSYSMONPSU_CFG_REG0_XTRNL_MUX_MASK    0x00000800U
+
+#define XSYSMONPSU_CFG_REG0_BU_SHIFT   10U
+#define XSYSMONPSU_CFG_REG0_BU_WIDTH   1U
+#define XSYSMONPSU_CFG_REG0_BU_MASK    0x00000400U
+
+#define XSYSMONPSU_CFG_REG0_EC_SHIFT   9U
+#define XSYSMONPSU_CFG_REG0_EC_WIDTH   1U
+#define XSYSMONPSU_CFG_REG0_EC_MASK    0x00000200U
+
+#define XSYSMONPSU_EVENT_MODE	1
+#define XSYSMONPSU_CONTINUOUS_MODE 2
+
+#define XSYSMONPSU_CFG_REG0_ACQ_SHIFT   8U
+#define XSYSMONPSU_CFG_REG0_ACQ_WIDTH   1U
+#define XSYSMONPSU_CFG_REG0_ACQ_MASK    0x00000100U
+
+#define XSYSMONPSU_CFG_REG0_MUX_CH_SHIFT   0U
+#define XSYSMONPSU_CFG_REG0_MUX_CH_WIDTH   6U
+#define XSYSMONPSU_CFG_REG0_MUX_CH_MASK    0x0000003fU
+
+/**
+ * Register: XSysmonPsuCfgReg1
+ */
+#define XSYSMONPSU_CFG_REG1_OFFSET   0x00000104U
+#define XSYSMONPSU_CFG_REG1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_CFG_REG1_SEQ_MDE_SHIFT   12U
+#define XSYSMONPSU_CFG_REG1_SEQ_MDE_WIDTH   4U
+#define XSYSMONPSU_CFG_REG1_SEQ_MDE_MASK    0x0000f000U
+
+#define XSYSMONPSU_CFG_REG1_ALRM_DIS6TO3_SHIFT   8U
+#define XSYSMONPSU_CFG_REG1_ALRM_DIS6TO3_WIDTH   4U
+#define XSYSMONPSU_CFG_REG1_ALRM_DIS6TO3_MASK    0x00000f00U
+
+#define XSYSMONPSU_CFG_REG1_ALRM_DIS2TO0_SHIFT   1U
+#define XSYSMONPSU_CFG_REG1_ALRM_DIS2TO0_WIDTH   3U
+#define XSYSMONPSU_CFG_REG1_ALRM_DIS2TO0_MASK    0x0000000eU
+
+#define XSYSMONPSU_CFG_REG1_OVR_TEMP_DIS_SHIFT   0U
+#define XSYSMONPSU_CFG_REG1_OVR_TEMP_DIS_WIDTH   1U
+#define XSYSMONPSU_CFG_REG1_OVR_TEMP_DIS_MASK    0x00000001U
+
+#define XSYSMONPSU_CFG_REG1_ALRM_ALL_MASK 0x00000f0fU
+#define XSYSMONPSU_CFR_REG1_ALRM_SUP6_MASK		0x0800U
+#define XSYSMONPSU_CFR_REG1_ALRM_SUP5_MASK		0x0400U
+#define XSYSMONPSU_CFR_REG1_ALRM_SUP4_MASK		0x0200U
+#define XSYSMONPSU_CFR_REG1_ALRM_SUP3_MASK		0x0100U
+#define XSYSMONPSU_CFR_REG1_ALRM_SUP2_MASK		0x0008U
+#define XSYSMONPSU_CFR_REG1_ALRM_SUP1_MASK		0x0004U
+#define XSYSMONPSU_CFR_REG1_ALRM_TEMP_MASK		0x0002U
+#define XSYSMONPSU_CFR_REG1_ALRM_OT_MASK		0x0001U
+
+/**
+ * Register: XSysmonPsuCfgReg2
+ */
+#define XSYSMONPSU_CFG_REG2_OFFSET   0x00000108U
+#define XSYSMONPSU_CFG_REG2_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_CFG_REG2_CLK_DVDR_SHIFT   8U
+#define XSYSMONPSU_CFG_REG2_CLK_DVDR_WIDTH   8U
+#define XSYSMONPSU_CFG_REG2_CLK_DVDR_MASK    0x0000ff00U
+
+#define XSYSMONPSU_CLK_DVDR_MIN_VAL			0U
+#define XSYSMONPSU_CLK_DVDR_MAX_VAL			255U
+
+#define XSYSMONPSU_CFG_REG2_PWR_DOWN_SHIFT   4U
+#define XSYSMONPSU_CFG_REG2_PWR_DOWN_WIDTH   4U
+#define XSYSMONPSU_CFG_REG2_PWR_DOWN_MASK    0x000000f0U
+
+#define XSYSMONPSU_CFG_REG2_TST_CH_EN_SHIFT   2U
+#define XSYSMONPSU_CFG_REG2_TST_CH_EN_WIDTH   1U
+#define XSYSMONPSU_CFG_REG2_TST_CH_EN_MASK    0x00000004U
+
+#define XSYSMONPSU_CFG_REG2_TST_MDE_SHIFT   0U
+#define XSYSMONPSU_CFG_REG2_TST_MDE_WIDTH   2U
+#define XSYSMONPSU_CFG_REG2_TST_MDE_MASK    0x00000003U
+
+/**
+ * Register: XSysmonPsuSeqCh0
+ */
+#define XSYSMONPSU_SEQ_CH0_OFFSET   0x00000120U
+#define XSYSMONPSU_SEQ_CH0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SEQ_CH0_CUR_MON_SHIFT   15U
+#define XSYSMONPSU_SEQ_CH0_CUR_MON_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_CUR_MON_MASK    0x00008000U
+
+#define XSYSMONPSU_SEQ_CH0_SUP3_SHIFT   14U
+#define XSYSMONPSU_SEQ_CH0_SUP3_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_SUP3_MASK    0x00004000U
+
+#define XSYSMONPSU_SEQ_CH0_VREFN_SHIFT   13U
+#define XSYSMONPSU_SEQ_CH0_VREFN_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_VREFN_MASK    0x00002000U
+
+#define XSYSMONPSU_SEQ_CH0_VREFP_SHIFT   12U
+#define XSYSMONPSU_SEQ_CH0_VREFP_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_VREFP_MASK    0x00001000U
+
+#define XSYSMONPSU_SEQ_CH0_VP_VN_SHIFT   11U
+#define XSYSMONPSU_SEQ_CH0_VP_VN_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_VP_VN_MASK    0x00000800U
+
+#define XSYSMONPSU_SEQ_CH0_SUP2_SHIFT   10U
+#define XSYSMONPSU_SEQ_CH0_SUP2_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_SUP2_MASK    0x00000400U
+
+#define XSYSMONPSU_SEQ_CH0_SUP1_SHIFT   9U
+#define XSYSMONPSU_SEQ_CH0_SUP1_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_SUP1_MASK    0x00000200U
+
+#define XSYSMONPSU_SEQ_CH0_TEMP_SHIFT   8U
+#define XSYSMONPSU_SEQ_CH0_TEMP_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_TEMP_MASK    0x00000100U
+
+#define XSYSMONPSU_SEQ_CH0_SUP6_SHIFT   7U
+#define XSYSMONPSU_SEQ_CH0_SUP6_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_SUP6_MASK    0x00000080U
+
+#define XSYSMONPSU_SEQ_CH0_SUP5_SHIFT   6U
+#define XSYSMONPSU_SEQ_CH0_SUP5_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_SUP5_MASK    0x00000040U
+
+#define XSYSMONPSU_SEQ_CH0_SUP4_SHIFT   5U
+#define XSYSMONPSU_SEQ_CH0_SUP4_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_SUP4_MASK    0x00000020U
+
+#define XSYSMONPSU_SEQ_CH0_TST_CH_SHIFT   3U
+#define XSYSMONPSU_SEQ_CH0_TST_CH_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_TST_CH_MASK    0x00000008U
+
+#define XSYSMONPSU_SEQ_CH0_CALIBRTN_SHIFT   0U
+#define XSYSMONPSU_SEQ_CH0_CALIBRTN_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH0_CALIBRTN_MASK    0x00000001U
+
+#define XSYSMONPSU_SEQ_CH0_VALID_MASK     0x0000FFE9U
+
+/**
+ * Register: XSysmonPsuSeqCh1
+ */
+#define XSYSMONPSU_SEQ_CH1_OFFSET         0x00000124U
+#define XSYSMONPSU_SEQ_CH1_VALID_MASK     0x0000FFFFU
+#define XSYSMONPSU_SEQ_CH1_RSTVAL         0x00000000U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX0F_SHIFT   15U
+#define XSYSMONPSU_SEQ_CH1_VAUX0F_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX0F_MASK    0x00008000U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX0E_SHIFT   14U
+#define XSYSMONPSU_SEQ_CH1_VAUX0E_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX0E_MASK    0x00004000U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX0D_SHIFT   13U
+#define XSYSMONPSU_SEQ_CH1_VAUX0D_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX0D_MASK    0x00002000U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX0C_SHIFT   12U
+#define XSYSMONPSU_SEQ_CH1_VAUX0C_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX0C_MASK    0x00001000U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX0B_SHIFT   11U
+#define XSYSMONPSU_SEQ_CH1_VAUX0B_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX0B_MASK    0x00000800U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX0A_SHIFT   10U
+#define XSYSMONPSU_SEQ_CH1_VAUX0A_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX0A_MASK    0x00000400U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX09_SHIFT   9U
+#define XSYSMONPSU_SEQ_CH1_VAUX09_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX09_MASK    0x00000200U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX08_SHIFT   8U
+#define XSYSMONPSU_SEQ_CH1_VAUX08_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX08_MASK    0x00000100U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX07_SHIFT   7U
+#define XSYSMONPSU_SEQ_CH1_VAUX07_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX07_MASK    0x00000080U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX06_SHIFT   6U
+#define XSYSMONPSU_SEQ_CH1_VAUX06_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX06_MASK    0x00000040U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX05_SHIFT   5U
+#define XSYSMONPSU_SEQ_CH1_VAUX05_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX05_MASK    0x00000020U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX04_SHIFT   4U
+#define XSYSMONPSU_SEQ_CH1_VAUX04_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX04_MASK    0x00000010U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX03_SHIFT   3U
+#define XSYSMONPSU_SEQ_CH1_VAUX03_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX03_MASK    0x00000008U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX02_SHIFT   2U
+#define XSYSMONPSU_SEQ_CH1_VAUX02_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX02_MASK    0x00000004U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX01_SHIFT   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX01_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX01_MASK    0x00000002U
+
+#define XSYSMONPSU_SEQ_CH1_VAUX00_SHIFT   0U
+#define XSYSMONPSU_SEQ_CH1_VAUX00_WIDTH   1U
+#define XSYSMONPSU_SEQ_CH1_VAUX00_MASK    0x00000001U
+
+#define XSM_SEQ_CH_SHIFT                  16U
+
+/**
+ * Register: XSysmonPsuSeqAverage0
+ */
+#define XSYSMONPSU_SEQ_AVERAGE0_OFFSET   0x00000128U
+#define XSYSMONPSU_SEQ_AVERAGE0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SEQ_AVERAGE0_SHIFT   0U
+#define XSYSMONPSU_SEQ_AVERAGE0_WIDTH   16U
+#define XSYSMONPSU_SEQ_AVERAGE0_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSeqAverage1
+ */
+#define XSYSMONPSU_SEQ_AVERAGE1_OFFSET   0x0000012CU
+#define XSYSMONPSU_SEQ_AVERAGE1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SEQ_AVERAGE1_SHIFT   0U
+#define XSYSMONPSU_SEQ_AVERAGE1_WIDTH   16U
+#define XSYSMONPSU_SEQ_AVERAGE1_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSeqInputMde0
+ */
+#define XSYSMONPSU_SEQ_INPUT_MDE0_OFFSET   0x00000130U
+#define XSYSMONPSU_SEQ_INPUT_MDE0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SEQ_INPUT_MDE0_SHIFT   0U
+#define XSYSMONPSU_SEQ_INPUT_MDE0_WIDTH   16U
+#define XSYSMONPSU_SEQ_INPUT_MDE0_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSeqInputMde1
+ */
+#define XSYSMONPSU_SEQ_INPUT_MDE1_OFFSET   0x00000134U
+#define XSYSMONPSU_SEQ_INPUT_MDE1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SEQ_INPUT_MDE1_SHIFT   0U
+#define XSYSMONPSU_SEQ_INPUT_MDE1_WIDTH   16U
+#define XSYSMONPSU_SEQ_INPUT_MDE1_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSeqAcq0
+ */
+#define XSYSMONPSU_SEQ_ACQ0_OFFSET   0x00000138U
+#define XSYSMONPSU_SEQ_ACQ0_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SEQ_ACQ0_SHIFT   0U
+#define XSYSMONPSU_SEQ_ACQ0_WIDTH   16U
+#define XSYSMONPSU_SEQ_ACQ0_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSeqAcq1
+ */
+#define XSYSMONPSU_SEQ_ACQ1_OFFSET   0x0000013CU
+#define XSYSMONPSU_SEQ_ACQ1_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SEQ_ACQ1_SHIFT   0U
+#define XSYSMONPSU_SEQ_ACQ1_WIDTH   16U
+#define XSYSMONPSU_SEQ_ACQ1_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmTempUpr
+ */
+#define XSYSMONPSU_ALRM_TEMP_UPR_OFFSET   0x00000140U
+#define XSYSMONPSU_ALRM_TEMP_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_TEMP_UPR_SHIFT   0U
+#define XSYSMONPSU_ALRM_TEMP_UPR_WIDTH   16U
+#define XSYSMONPSU_ALRM_TEMP_UPR_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup1Upr
+ */
+#define XSYSMONPSU_ALRM_SUP1_UPR_OFFSET   0x00000144U
+#define XSYSMONPSU_ALRM_SUP1_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP1_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP1_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP1_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup2Upr
+ */
+#define XSYSMONPSU_ALRM_SUP2_UPR_OFFSET   0x00000148U
+#define XSYSMONPSU_ALRM_SUP2_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP2_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP2_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP2_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmOtUpr
+ */
+#define XSYSMONPSU_ALRM_OT_UPR_OFFSET   0x0000014CU
+#define XSYSMONPSU_ALRM_OT_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_OT_UPR_TEMP_SHIFT   0U
+#define XSYSMONPSU_ALRM_OT_UPR_TEMP_WIDTH   16U
+#define XSYSMONPSU_ALRM_OT_UPR_TEMP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmTempLwr
+ */
+#define XSYSMONPSU_ALRM_TEMP_LWR_OFFSET   0x00000150U
+#define XSYSMONPSU_ALRM_TEMP_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_TEMP_LWR_SHIFT   1U
+#define XSYSMONPSU_ALRM_TEMP_LWR_WIDTH   15U
+#define XSYSMONPSU_ALRM_TEMP_LWR_MASK    0x0000fffeU
+
+#define XSYSMONPSU_ALRM_TEMP_LWR_TSHLD_MDE_SHIFT   0U
+#define XSYSMONPSU_ALRM_TEMP_LWR_TSHLD_MDE_WIDTH   1U
+#define XSYSMONPSU_ALRM_TEMP_LWR_TSHLD_MDE_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuAlrmSup1Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP1_LWR_OFFSET   0x00000154U
+#define XSYSMONPSU_ALRM_SUP1_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP1_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP1_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP1_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup2Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP2_LWR_OFFSET   0x00000158U
+#define XSYSMONPSU_ALRM_SUP2_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP2_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP2_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP2_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmOtLwr
+ */
+#define XSYSMONPSU_ALRM_OT_LWR_OFFSET   0x0000015CU
+#define XSYSMONPSU_ALRM_OT_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_OT_LWR_TEMP_SHIFT   1U
+#define XSYSMONPSU_ALRM_OT_LWR_TEMP_WIDTH   15U
+#define XSYSMONPSU_ALRM_OT_LWR_TEMP_MASK    0x0000fffeU
+
+#define XSYSMONPSU_ALRM_OT_LWR_TSHLD_MDE_SHIFT   0U
+#define XSYSMONPSU_ALRM_OT_LWR_TSHLD_MDE_WIDTH   1U
+#define XSYSMONPSU_ALRM_OT_LWR_TSHLD_MDE_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuAlrmSup3Upr
+ */
+#define XSYSMONPSU_ALRM_SUP3_UPR_OFFSET   0x00000160U
+#define XSYSMONPSU_ALRM_SUP3_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP3_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP3_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP3_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup4Upr
+ */
+#define XSYSMONPSU_ALRM_SUP4_UPR_OFFSET   0x00000164U
+#define XSYSMONPSU_ALRM_SUP4_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP4_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP4_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP4_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup5Upr
+ */
+#define XSYSMONPSU_ALRM_SUP5_UPR_OFFSET   0x00000168U
+#define XSYSMONPSU_ALRM_SUP5_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP5_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP5_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP5_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup6Upr
+ */
+#define XSYSMONPSU_ALRM_SUP6_UPR_OFFSET   0x0000016CU
+#define XSYSMONPSU_ALRM_SUP6_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP6_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP6_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP6_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup3Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP3_LWR_OFFSET   0x00000170U
+#define XSYSMONPSU_ALRM_SUP3_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP3_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP3_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP3_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup4Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP4_LWR_OFFSET   0x00000174U
+#define XSYSMONPSU_ALRM_SUP4_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP4_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP4_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP4_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup5Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP5_LWR_OFFSET   0x00000178U
+#define XSYSMONPSU_ALRM_SUP5_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP5_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP5_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP5_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup6Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP6_LWR_OFFSET   0x0000017CU
+#define XSYSMONPSU_ALRM_SUP6_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP6_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP6_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP6_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup7Upr
+ */
+#define XSYSMONPSU_ALRM_SUP7_UPR_OFFSET   0x00000180U
+#define XSYSMONPSU_ALRM_SUP7_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP7_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP7_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP7_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup8Upr
+ */
+#define XSYSMONPSU_ALRM_SUP8_UPR_OFFSET   0x00000184U
+#define XSYSMONPSU_ALRM_SUP8_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP8_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP8_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP8_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup9Upr
+ */
+#define XSYSMONPSU_ALRM_SUP9_UPR_OFFSET   0x00000188U
+#define XSYSMONPSU_ALRM_SUP9_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP9_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP9_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP9_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup10Upr
+ */
+#define XSYSMONPSU_ALRM_SUP10_UPR_OFFSET   0x0000018CU
+#define XSYSMONPSU_ALRM_SUP10_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP10_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP10_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP10_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmVccamsUpr
+ */
+#define XSYSMONPSU_ALRM_VCCAMS_UPR_OFFSET   0x00000190U
+#define XSYSMONPSU_ALRM_VCCAMS_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_VCCAMS_UPR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_VCCAMS_UPR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_VCCAMS_UPR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmTremoteUpr
+ */
+#define XSYSMONPSU_ALRM_TREMOTE_UPR_OFFSET   0x00000194U
+#define XSYSMONPSU_ALRM_TREMOTE_UPR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_TREMOTE_UPR_TEMP_SHIFT   0U
+#define XSYSMONPSU_ALRM_TREMOTE_UPR_TEMP_WIDTH   16U
+#define XSYSMONPSU_ALRM_TREMOTE_UPR_TEMP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup7Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP7_LWR_OFFSET   0x000001A0U
+#define XSYSMONPSU_ALRM_SUP7_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP7_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP7_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP7_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup8Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP8_LWR_OFFSET   0x000001A4U
+#define XSYSMONPSU_ALRM_SUP8_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP8_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP8_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP8_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup9Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP9_LWR_OFFSET   0x000001A8U
+#define XSYSMONPSU_ALRM_SUP9_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP9_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP9_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP9_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmSup10Lwr
+ */
+#define XSYSMONPSU_ALRM_SUP10_LWR_OFFSET   0x000001ACU
+#define XSYSMONPSU_ALRM_SUP10_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_SUP10_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_SUP10_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_SUP10_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmVccamsLwr
+ */
+#define XSYSMONPSU_ALRM_VCCAMS_LWR_OFFSET   0x000001B0U
+#define XSYSMONPSU_ALRM_VCCAMS_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_VCCAMS_LWR_SUP_SHIFT   0U
+#define XSYSMONPSU_ALRM_VCCAMS_LWR_SUP_WIDTH   16U
+#define XSYSMONPSU_ALRM_VCCAMS_LWR_SUP_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuAlrmTremoteLwr
+ */
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_OFFSET   0x000001B4U
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_TEMP_SHIFT   1U
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_TEMP_WIDTH   15U
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_TEMP_MASK    0x0000fffeU
+
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_TSHLD_MDE_SHIFT   0U
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_TSHLD_MDE_WIDTH   1U
+#define XSYSMONPSU_ALRM_TREMOTE_LWR_TSHLD_MDE_MASK    0x00000001U
+
+/**
+ * Register: XSysmonPsuSup7
+ */
+#define XSYSMONPSU_SUP7_OFFSET   0x00000200U
+#define XSYSMONPSU_SUP7_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP7_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP7_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP7_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup8
+ */
+#define XSYSMONPSU_SUP8_OFFSET   0x00000204U
+#define XSYSMONPSU_SUP8_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP8_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP8_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP8_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup9
+ */
+#define XSYSMONPSU_SUP9_OFFSET   0x00000208U
+#define XSYSMONPSU_SUP9_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP9_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP9_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP9_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuSup10
+ */
+#define XSYSMONPSU_SUP10_OFFSET   0x0000020CU
+#define XSYSMONPSU_SUP10_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_SUP10_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_SUP10_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_SUP10_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuVccams
+ */
+#define XSYSMONPSU_VCCAMS_OFFSET   0x00000210U
+#define XSYSMONPSU_VCCAMS_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_VCCAMS_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_VCCAMS_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_VCCAMS_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuTempRemte
+ */
+#define XSYSMONPSU_TEMP_REMTE_OFFSET   0x00000214U
+#define XSYSMONPSU_TEMP_REMTE_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_TEMP_REMTE_SHIFT   0U
+#define XSYSMONPSU_TEMP_REMTE_WIDTH   16U
+#define XSYSMONPSU_TEMP_REMTE_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup7
+ */
+#define XSYSMONPSU_MAX_SUP7_OFFSET   0x00000280U
+#define XSYSMONPSU_MAX_SUP7_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP7_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP7_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP7_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup8
+ */
+#define XSYSMONPSU_MAX_SUP8_OFFSET   0x00000284U
+#define XSYSMONPSU_MAX_SUP8_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP8_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP8_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP8_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup9
+ */
+#define XSYSMONPSU_MAX_SUP9_OFFSET   0x00000288U
+#define XSYSMONPSU_MAX_SUP9_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP9_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP9_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP9_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxSup10
+ */
+#define XSYSMONPSU_MAX_SUP10_OFFSET   0x0000028CU
+#define XSYSMONPSU_MAX_SUP10_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_SUP10_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_SUP10_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_SUP10_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxVccams
+ */
+#define XSYSMONPSU_MAX_VCCAMS_OFFSET   0x00000290U
+#define XSYSMONPSU_MAX_VCCAMS_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_VCCAMS_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MAX_VCCAMS_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MAX_VCCAMS_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMaxTempRemte
+ */
+#define XSYSMONPSU_MAX_TEMP_REMTE_OFFSET   0x00000294U
+#define XSYSMONPSU_MAX_TEMP_REMTE_RSTVAL   0x00000000U
+
+#define XSYSMONPSU_MAX_TEMP_REMTE_SHIFT   0U
+#define XSYSMONPSU_MAX_TEMP_REMTE_WIDTH   16U
+#define XSYSMONPSU_MAX_TEMP_REMTE_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup7
+ */
+#define XSYSMONPSU_MIN_SUP7_OFFSET   0x000002A0U
+#define XSYSMONPSU_MIN_SUP7_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP7_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP7_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP7_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup8
+ */
+#define XSYSMONPSU_MIN_SUP8_OFFSET   0x000002A4U
+#define XSYSMONPSU_MIN_SUP8_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP8_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP8_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP8_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup9
+ */
+#define XSYSMONPSU_MIN_SUP9_OFFSET   0x000002A8U
+#define XSYSMONPSU_MIN_SUP9_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP9_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP9_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP9_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinSup10
+ */
+#define XSYSMONPSU_MIN_SUP10_OFFSET   0x000002ACU
+#define XSYSMONPSU_MIN_SUP10_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_SUP10_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_SUP10_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_SUP10_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinVccams
+ */
+#define XSYSMONPSU_MIN_VCCAMS_OFFSET   0x000002B0U
+#define XSYSMONPSU_MIN_VCCAMS_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_VCCAMS_SUP_VAL_SHIFT   0U
+#define XSYSMONPSU_MIN_VCCAMS_SUP_VAL_WIDTH   16U
+#define XSYSMONPSU_MIN_VCCAMS_SUP_VAL_MASK    0x0000ffffU
+
+/**
+ * Register: XSysmonPsuMinTempRemte
+ */
+#define XSYSMONPSU_MIN_TEMP_REMTE_OFFSET   0x000002B4U
+#define XSYSMONPSU_MIN_TEMP_REMTE_RSTVAL   0x0000ffffU
+
+#define XSYSMONPSU_MIN_TEMP_REMTE_SHIFT   0U
+#define XSYSMONPSU_MIN_TEMP_REMTE_WIDTH   16U
+#define XSYSMONPSU_MIN_TEMP_REMTE_MASK    0x0000ffffU
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* This macro reads the given register.
+*
+* @param	RegisterAddr is the register address in the address
+* 			space of the SYSMONPSU device.
+*
+* @return	The 32-bit value of the register
+*
+* @note		None.
+*
+*****************************************************************************/
+#define XSysmonPsu_ReadReg(RegisterAddr) Xil_In32(RegisterAddr)
+
+/****************************************************************************/
+/**
+*
+* This macro writes the given register.
+*
+* @param	RegisterAddr is the register address in the address
+* 			space of the SYSMONPSU device.
+* @param	Data is the 32-bit value to write to the register.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+#define XSysmonPsu_WriteReg(RegisterAddr, Data) Xil_Out32(RegisterAddr, (u32)(Data))
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* XSYSMONPSU_HW_H__ */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_intr.c
new file mode 100644
index 000000000..b178c2e11
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_intr.c
@@ -0,0 +1,250 @@
+/******************************************************************************
+*
+* Copyright (C) 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsysmonpsu_intr.c
+*
+* This file contains functions related to SYSMONPSU interrupt handling.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.0   kvn    12/15/15 First release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xsysmonpsu.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions ****************************/
+
+/****************************************************************************/
+/**
+*
+* This function enables the specified interrupts in the device.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Mask is the 64 bit-mask of the interrupts to be enabled.
+*		Bit positions of 1 will be enabled. Bit positions of 0 will
+*		keep the previous setting. This mask is formed by OR'ing
+*		XSYSMONPSU_IER_0_* and XSYSMONPSU_IER_1_* bits defined in
+*		xsysmonpsu_hw.h.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XSysMonPsu_IntrEnable(XSysMonPsu *InstancePtr, u64 Mask)
+{
+	u32 RegValue;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Enable the specified interrupts in the AMS Interrupt Enable Register. */
+	RegValue = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_IER_0_OFFSET);
+	RegValue |= (u32)(Mask & (u64)XSYSMONPSU_IXR_0_MASK);
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XSYSMONPSU_IER_0_OFFSET,
+			  RegValue);
+
+	RegValue = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_IER_1_OFFSET);
+	RegValue |= (u32)((Mask >> XSYSMONPSU_IXR_1_SHIFT) & XSYSMONPSU_IXR_1_MASK);
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XSYSMONPSU_IER_1_OFFSET,
+			  RegValue);
+}
+
+/****************************************************************************/
+/**
+*
+* This function disables the specified interrupts in the device.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Mask is the 64 bit-mask of the interrupts to be disabled.
+*		Bit positions of 1 will be disabled. Bit positions of 0 will
+*		keep the previous setting. This mask is formed by OR'ing
+*		XSYSMONPSU_IDR_0_* and XSYSMONPSU_IDR_1_* bits defined in
+*		xsysmonpsu_hw.h.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XSysMonPsu_IntrDisable(XSysMonPsu *InstancePtr, u64 Mask)
+{
+	u32 RegValue;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Disable the specified interrupts in the AMS Interrupt Disable Register. */
+	RegValue = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_IDR_0_OFFSET);
+	RegValue |= (u32)(Mask & (u64)XSYSMONPSU_IXR_0_MASK);
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XSYSMONPSU_IDR_0_OFFSET,
+			  RegValue);
+
+	RegValue = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_IDR_1_OFFSET);
+	RegValue |= (u32)((Mask >> XSYSMONPSU_IXR_1_SHIFT) & XSYSMONPSU_IXR_1_MASK);
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XSYSMONPSU_IDR_1_OFFSET,
+			  RegValue);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the enabled interrupts read from the Interrupt Enable
+* Register (IER). Use the XSYSMONPSU_IER_0_* and XSYSMONPSU_IER_1_* constants
+* defined in xsysmonpsu_hw.h to interpret the returned value.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+*
+* @return	A 64-bit value representing the contents of the Interrupt Mask
+* 			Registers (IMR1 IMR0).
+*
+* @note		None.
+*
+*****************************************************************************/
+u64 XSysMonPsu_IntrGetEnabled(XSysMonPsu *InstancePtr)
+{
+	u64 MaskedInterrupts;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Return the value read from the AMS Interrupt Mask Register. */
+	MaskedInterrupts = (u64)XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+                         XSYSMONPSU_IMR_0_OFFSET) & (u64)XSYSMONPSU_IXR_0_MASK;
+	MaskedInterrupts |= ((u64)XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+                         XSYSMONPSU_IMR_1_OFFSET) & (u64)XSYSMONPSU_IXR_1_MASK)
+                          << XSYSMONPSU_IXR_1_SHIFT;
+
+	return (~MaskedInterrupts);
+}
+
+/****************************************************************************/
+/**
+*
+* This function returns the interrupt status read from Interrupt Status
+* Register(ISR). Use the XSYSMONPSU_ISR_0_* and XSYSMONPSU_ISR_1_ constants
+* defined in xsysmonpsu_hw.h to interpret the returned value.
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+*
+* @return	A 64-bit value representing the contents of the Interrupt Status
+* 			Registers (ISR1 ISR0).
+*
+* @note		None.
+*
+*****************************************************************************/
+u64 XSysMonPsu_IntrGetStatus(XSysMonPsu *InstancePtr)
+{
+	u64 IntrStatusRegister;
+
+	/* Assert the arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Return the value read from the AMS ISR. */
+	IntrStatusRegister = (u64)XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+                           XSYSMONPSU_ISR_0_OFFSET) & (u64)XSYSMONPSU_IXR_0_MASK;
+	IntrStatusRegister |= ((u64)XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+                           XSYSMONPSU_ISR_1_OFFSET) & (u64)XSYSMONPSU_IXR_1_MASK)
+                           << XSYSMONPSU_IXR_1_SHIFT;
+
+	return IntrStatusRegister;
+}
+
+/****************************************************************************/
+/**
+*
+* This function clears the specified interrupts in the Interrupt Status
+* Register (ISR).
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+* @param	Mask is the 64 bit-mask of the interrupts to be cleared.
+*		Bit positions of 1 will be cleared. Bit positions of 0 will not
+* 		change the previous interrupt status. This mask is formed by
+* 		OR'ing the XSYSMONPSU_ISR_0_* and XSYSMONPSU_ISR_1_* bits
+* 		which are defined in xsysmonpsu_hw.h.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XSysMonPsu_IntrClear(XSysMonPsu *InstancePtr, u64 Mask)
+{
+	u32 RegValue;
+
+	/* Assert the arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Clear the specified interrupts in the Interrupt Status register. */
+	RegValue = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_ISR_0_OFFSET);
+	RegValue &= (u32)(Mask & (u64)XSYSMONPSU_IXR_0_MASK);
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XSYSMONPSU_ISR_0_OFFSET,
+			  RegValue);
+
+	RegValue = XSysmonPsu_ReadReg(InstancePtr->Config.BaseAddress +
+					XSYSMONPSU_ISR_1_OFFSET);
+	RegValue &= (u32)((Mask >> XSYSMONPSU_IXR_1_SHIFT) & XSYSMONPSU_IXR_1_MASK);
+	XSysmonPsu_WriteReg(InstancePtr->Config.BaseAddress + XSYSMONPSU_ISR_1_OFFSET,
+			  RegValue);
+}
+
+
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_selftest.c
new file mode 100644
index 000000000..5b709be14
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_selftest.c
@@ -0,0 +1,132 @@
+/******************************************************************************
+*
+* Copyright (C) 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsysmon_selftest.c
+*
+* This file contains a diagnostic self test function for the XSysMon driver.
+* The self test function does a simple read/write test of the Alarm Threshold
+* Register.
+*
+* See xsysmonpsu.h for more information.
+*
+* @note	None.
+*
+* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- -----  -------- -----------------------------------------------------
+* 1.0   kvn   12/15/15  First release
+*
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+
+#include "xsysmonpsu.h"
+
+/************************** Constant Definitions ****************************/
+
+/*
+ * The following constant defines the test value to be written
+ * to the Alarm Threshold Register
+ */
+#define XSM_ATR_TEST_VALUE 		0x55U
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Variable Definitions ****************************/
+
+/************************** Function Prototypes *****************************/
+
+/*****************************************************************************/
+/**
+*
+* Run a self-test on the driver/device. The test
+*	- Resets the device,
+*	- Writes a value into the Alarm Threshold register and reads it back
+*	for comparison.
+*	- Resets the device again.
+*
+*
+* @param	InstancePtr is a pointer to the XSysMonPsu instance.
+*
+* @return
+*		- XST_SUCCESS if the value read from the Alarm Threshold
+*		register is the same as the value written.
+*		- XST_FAILURE Otherwise
+*
+* @note		This is a destructive test in that resets of the device are
+*		performed. Refer to the device specification for the
+*		device status after the reset operation.
+*
+******************************************************************************/
+s32 XSysMonPsu_SelfTest(XSysMonPsu *InstancePtr)
+{
+	s32 Status;
+	u32 RegValue;
+
+	/* Assert the argument */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Reset the device to get it back to its default state */
+	XSysMonPsu_Reset(InstancePtr);
+
+	/*
+	 * Write a value into the Alarm Threshold registers, read it back, and
+	 * do the comparison
+	 */
+	XSysMonPsu_SetAlarmThreshold(InstancePtr, XSM_ATR_SUP1_UPPER,
+				  XSM_ATR_TEST_VALUE, XSYSMON_PS);
+	RegValue = (u32)XSysMonPsu_GetAlarmThreshold(InstancePtr,
+					XSM_ATR_SUP1_UPPER, XSYSMON_PS);
+
+	if (RegValue == XSM_ATR_TEST_VALUE) {
+		Status = XST_SUCCESS;
+	} else {
+		Status = XST_FAILURE;
+	}
+
+	/* Reset the device again to its default state. */
+	XSysMonPsu_Reset(InstancePtr);
+
+	/* Return the test result. */
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_sinit.c
new file mode 100644
index 000000000..34249a209
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/sysmonpsu_v1_0/src/xsysmonpsu_sinit.c
@@ -0,0 +1,99 @@
+/******************************************************************************
+*
+* Copyright (C) 2016 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xsysmonpsu_sinit.c
+*
+* This file contains the implementation of the XSysMonPsu driver's static
+* initialization functionality.
+*
+* @note		None.
+*
+* 
+*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	    Changes
+* ----- -----  -------- -----------------------------------------------
+* 1.0   kvn    12/15/15 First release.
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xsysmonpsu.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+extern XSysMonPsu_Config XSysMonPsu_ConfigTable[];
+
+/*****************************************************************************/
+/**
+*
+* This function looks for the device configuration based on the unique device
+* ID. The table XSysmonPsu_ConfigTable[] contains the configuration information
+* for each device in the system.
+*
+* @param	DeviceId is the unique device ID of the device being looked up.
+*
+* @return	A pointer to the configuration table entry corresponding to the
+*		given device ID, or NULL if no match is found.
+*
+* @note		None.
+*
+******************************************************************************/
+XSysMonPsu_Config *XSysMonPsu_LookupConfig(u16 DeviceId)
+{
+	XSysMonPsu_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index = 0U; Index < (u32)XPAR_XSYSMONPSU_NUM_INSTANCES; Index++) {
+		if (XSysMonPsu_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XSysMonPsu_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return CfgPtr;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/Makefile
new file mode 100644
index 000000000..35c277dde
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner ttcps_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling ttcps"
+
+ttcps_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: ttcps_includes
+
+ttcps_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps.c
new file mode 100644
index 000000000..4534553f6
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps.c
@@ -0,0 +1,441 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xttcps.c
+* @addtogroup ttcps_v3_0
+* @{
+*
+* This file contains the implementation of the XTtcPs driver. This driver
+* controls the operation of one timer counter in the Triple Timer Counter (TTC)
+* module in the Ps block. Refer to xttcps.h for more detailed description
+* of the driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- -------------------------------------------------
+* 1.00a drg/jz 01/21/10 First release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.01	pkp	   01/30/16 Modified XTtcPs_CfgInitialize to add XTtcps_Stop
+*						to stop the timer before configuring
+*
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xttcps.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+*
+* Initializes a specific XTtcPs instance such that the driver is ready to use.
+* This function initializes a single timer counter in the triple timer counter
+* function block.
+*
+* The state of the device after initialization is:
+*  - Overflow Mode
+*  - Internal (pclk) selected
+*  - Counter disabled
+*  - All Interrupts disabled
+*  - Output waveforms disabled
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	ConfigPtr is a reference to a structure containing information
+*		about a specific TTC device.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. The caller is responsible for keeping the address
+*		mapping from EffectiveAddr to the device physical base address
+*		unchanged once this function is invoked. Unexpected errors may
+*		occur if the address mapping changes after this function is
+*		called. If address translation is not used, then use
+*		ConfigPtr->BaseAddress for this parameter, passing the physical
+*		address instead.
+*
+* @return
+*
+* 		- XST_SUCCESS if the initialization is successful.
+*		- XST_DEVICE_IS_STARTED if the device is started. It must be
+*		  stopped to re-initialize.
+*
+* @note		Device has to be stopped first to call this function to
+*		initialize it.
+*
+******************************************************************************/
+s32 XTtcPs_CfgInitialize(XTtcPs *InstancePtr, XTtcPs_Config *ConfigPtr,
+			      u32 EffectiveAddr)
+{
+	s32 Status;
+	u32 IsStartResult;
+	/*
+	 * Assert to validate input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+
+	/*
+	 * Set some default values
+	 */
+	InstancePtr->Config.DeviceId = ConfigPtr->DeviceId;
+	InstancePtr->Config.BaseAddress = EffectiveAddr;
+	InstancePtr->Config.InputClockHz = ConfigPtr->InputClockHz;
+
+	IsStartResult = XTtcPs_IsStarted(InstancePtr);
+	/*
+	 * If the timer counter has already started, return an error
+	 * Device should be stopped first.
+	 */
+	if(IsStartResult == (u32)TRUE) {
+		Status = XST_DEVICE_IS_STARTED;
+	} else {
+
+		/*
+		 * stop the timer before configuring
+		 */
+		XTtcPs_Stop(InstancePtr);
+		/*
+		 * Reset the count control register to it's default value.
+		 */
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_CNT_CNTRL_OFFSET,
+				  XTTCPS_CNT_CNTRL_RESET_VALUE);
+
+		/*
+		 * Reset the rest of the registers to the default values.
+		 */
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_CLK_CNTRL_OFFSET, 0x00U);
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_INTERVAL_VAL_OFFSET, 0x00U);
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_MATCH_1_OFFSET, 0x00U);
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_MATCH_2_OFFSET, 0x00U);
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_MATCH_2_OFFSET, 0x00U);
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_IER_OFFSET, 0x00U);
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_ISR_OFFSET, XTTCPS_IXR_ALL_MASK);
+
+		InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+
+		/*
+		 * Reset the counter value
+		 */
+		XTtcPs_ResetCounterValue(InstancePtr);
+		Status = XST_SUCCESS;
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function is used to set the match registers. There are three match
+* registers.
+*
+* The match 0 register is special. If the waveform output mode is enabled, the
+* waveform will change polarity when the count matches the value in the match 0
+* register. The polarity of the waveform output can also be set using the
+* XTtcPs_SetOptions() function.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	MatchIndex is the index to the match register to be set.
+*		Valid values are 0, 1, or 2.
+* @param	Value is the 16-bit value to be set in the match register.
+*
+* @return	None
+*
+* @note		None
+*
+****************************************************************************/
+void XTtcPs_SetMatchValue(XTtcPs *InstancePtr, u8 MatchIndex, u16 Value)
+{
+	/*
+	 * Assert to validate input arguments.
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(MatchIndex < (u8)XTTCPS_NUM_MATCH_REG);
+
+	/*
+	 * Write the value to the correct match register with MatchIndex
+	 */
+	XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XTtcPs_Match_N_Offset(MatchIndex), Value);
+}
+
+/*****************************************************************************/
+/**
+*
+* This function is used to get the value of the match registers. There are
+* three match registers.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	MatchIndex is the index to the match register to be set.
+*		Valid values are 0, 1, or 2.
+*
+* @return	None
+*
+* @note		None
+*
+****************************************************************************/
+u16 XTtcPs_GetMatchValue(XTtcPs *InstancePtr, u8 MatchIndex)
+{
+	u32 MatchReg;
+
+	/*
+	 * Assert to validate input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(MatchIndex < XTTCPS_NUM_MATCH_REG);
+
+	MatchReg = XTtcPs_ReadReg(InstancePtr->Config.BaseAddress,
+			    XTtcPs_Match_N_Offset(MatchIndex));
+
+	return (u16) MatchReg;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the prescaler enable bit and if needed sets the prescaler
+* bits in the control register.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	PrescalerValue is a number from 0-16 that sets the prescaler
+*		to use.
+*		If the parameter is 0 - 15, use a prescaler on the clock of
+*		2^(PrescalerValue+1), or 2-65536.
+*		If the parameter is XTTCPS_CLK_CNTRL_PS_DISABLE, do not use a
+*		prescaler.
+*
+* @return	None
+*
+* @note		None
+*
+****************************************************************************/
+void XTtcPs_SetPrescaler(XTtcPs *InstancePtr, u8 PrescalerValue)
+{
+	u32 ClockReg;
+
+	/*
+	 * Assert to validate input arguments.
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(PrescalerValue <= XTTCPS_CLK_CNTRL_PS_DISABLE);
+
+	/*
+	 * Read the clock control register
+	 */
+	ClockReg = XTtcPs_ReadReg(InstancePtr->Config.BaseAddress,
+			   XTTCPS_CLK_CNTRL_OFFSET);
+
+	/*
+	 * Clear all of the prescaler control bits in the register
+	 */
+	ClockReg &=
+		~(XTTCPS_CLK_CNTRL_PS_VAL_MASK | XTTCPS_CLK_CNTRL_PS_EN_MASK);
+
+	if (PrescalerValue < XTTCPS_CLK_CNTRL_PS_DISABLE) {
+		/*
+		 * Set the prescaler value and enable prescaler
+		 */
+		ClockReg |= (u32)(((u32)PrescalerValue << (u32)XTTCPS_CLK_CNTRL_PS_VAL_SHIFT) &
+			(u32)XTTCPS_CLK_CNTRL_PS_VAL_MASK);
+		ClockReg |= (u32)XTTCPS_CLK_CNTRL_PS_EN_MASK;
+	}
+
+	/*
+	 * Write the register with the new values.
+	 */
+	XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+			  XTTCPS_CLK_CNTRL_OFFSET, ClockReg);
+}
+
+/*****************************************************************************/
+/**
+*
+* This function gets the input clock prescaler
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* 
+* @return	The value(n) from which the prescalar value is calculated
+*		as 2^(n+1). Some example values are given below :
+*
+* 	Value		Prescaler
+* 	0		2
+* 	1		4
+* 	N		2^(n+1)
+* 	15		65536
+* 	16		1
+* 

+*
+* @note		None.
+*
+****************************************************************************/
+u8 XTtcPs_GetPrescaler(XTtcPs *InstancePtr)
+{
+	u8 Status;
+	u32 ClockReg;
+
+	/*
+	 * Assert to validate input arguments.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the clock control register
+	 */
+	ClockReg = XTtcPs_ReadReg(InstancePtr->Config.BaseAddress,
+				    XTTCPS_CLK_CNTRL_OFFSET);
+
+	if (0 == (ClockReg & XTTCPS_CLK_CNTRL_PS_EN_MASK)) {
+		/*
+		 * Prescaler is disabled. Return the correct flag value
+		 */
+		Status = (u8)XTTCPS_CLK_CNTRL_PS_DISABLE;
+	}
+	else {
+
+		Status = (u8)((ClockReg & (u32)XTTCPS_CLK_CNTRL_PS_VAL_MASK) >>
+			(u32)XTTCPS_CLK_CNTRL_PS_VAL_SHIFT);
+	}
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function calculates the interval value as well as the prescaler value
+* for a given frequency.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	Freq is the requested output frequency for the device.
+* @param	Interval is the interval value for the given frequency,
+*		it is the output value for this function.
+* @param	Prescaler is the prescaler value for the given frequency,
+*		it is the output value for this function.
+*
+* @return	None.
+*
+* @note
+*  Upon successful calculation for the given frequency, Interval and Prescaler
+*  carry the settings for the timer counter; Upon unsuccessful calculation,
+*  Interval and Prescaler are set to 0xFF(FF) for their maximum values to
+*  signal the caller of failure. Therefore, caller needs to check the return
+*  interval or prescaler values for whether the function has succeeded.
+*
+****************************************************************************/
+void XTtcPs_CalcIntervalFromFreq(XTtcPs *InstancePtr, u32 Freq,
+        u16 *Interval, u8 *Prescaler)
+{
+	u8 TmpPrescaler;
+	u32 TempValue;
+	u32 InputClock;
+
+	InputClock = InstancePtr->Config.InputClockHz;
+	/*
+	 * Find the smallest prescaler that will work for a given frequency. The
+	 * smaller the prescaler, the larger the count and the more accurate the
+	 *  PWM setting.
+	 */
+	TempValue = InputClock/ Freq;
+
+	if (TempValue < 4U) {
+		/*
+		 * The frequency is too high, it is too close to the input
+		 * clock value. Use maximum values to signal caller.
+		 */
+		*Interval = 0xFFFFU;
+		*Prescaler = 0xFFU;
+		return;
+	}
+
+	/*
+	 * First, do we need a prescaler or not?
+	 */
+	if (((u32)65536U) > TempValue) {
+		/*
+		 * We do not need a prescaler, so set the values appropriately
+		 */
+		*Interval = (u16)TempValue;
+		*Prescaler = XTTCPS_CLK_CNTRL_PS_DISABLE;
+		return;
+	}
+
+
+	for (TmpPrescaler = 0U; TmpPrescaler < XTTCPS_CLK_CNTRL_PS_DISABLE;
+	     TmpPrescaler++) {
+		TempValue =	InputClock/ (Freq * (1U << (TmpPrescaler + 1U)));
+
+		/*
+		 * The first value less than 2^16 is the best bet
+		 */
+		if (((u32)65536U) > TempValue) {
+			/*
+			 * Set the values appropriately
+			 */
+			*Interval = (u16)TempValue;
+			*Prescaler = TmpPrescaler;
+			return;
+		}
+	}
+
+	/* Can not find interval values that work for the given frequency.
+	 * Return maximum values to signal caller.
+	 */
+	*Interval = 0XFFFFU;
+	*Prescaler = 0XFFU;
+	return;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps.h
new file mode 100644
index 000000000..646d24db5
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps.h
@@ -0,0 +1,412 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xttcps.h
+* @addtogroup ttcps_v3_0
+* @{
+* @details
+*
+* This is the driver for one 16-bit timer counter in the Triple Timer Counter
+* (TTC) module in the Ps block.
+*
+* The TTC module provides three independent timer/counter modules that can each
+* be clocked using either the system clock (pclk) or an externally driven
+* clock (ext_clk). In addition, each counter can independently prescale its
+* selected clock input (divided by 2 to 65536). Counters can be set to
+* decrement or increment.
+*
+* Each of the counters can be programmed to generate interrupt pulses:
+*	. At a regular, predefined period, that is on a timed interval
+*	. When the counter registers overflow
+* 	. When the count matches any one of the three 'match' registers
+*
+* Therefore, up to six different events can trigger a timer interrupt: three
+* match interrupts, an overflow interrupt, an interval interrupt and an event
+* timer interrupt. Note that the overflow interrupt and the interval interrupt
+* are mutually exclusive.
+*
+* Initialization & Configuration
+*
+* An XTtcPs_Config structure is used to configure a driver instance.
+* Information in the XTtcPs_Config structure is the hardware properties
+* about the device.
+*
+* A driver instance is initialized through
+* XTtcPs_CfgInitialize(InstancePtr, CfgPtr, EffectiveAddr). Where CfgPtr
+* is a pointer to the XTtcPs_Config structure, it can be looked up statically
+* through XTtcPs_LookupConfig(DeviceID), or passed in by the caller. The
+* EffectiveAddr can be the static base address of the device or virtual
+* mapped address if address translation is supported.
+*
+* Interrupts
+*
+* Interrupt handler is not provided by the driver, as handling of interrupt
+* is application specific.
+*
+* @note
+* The default setting for a timer/counter is:
+*  - Overflow Mode
+*  - Internal clock (pclk) selected
+*  - Counter disabled
+*  - All Interrupts disabled
+*  - Output waveforms disabled
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- -----------------------------------------------------
+* 1.00a drg/jz 01/20/10 First release..
+* 2.0   adk    12/10/13 Updated as per the New Tcl API's
+* 3.0	pkp    12/09/14 Added support for Zynq Ultrascale Mp.Also code
+*			modified for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+#ifndef XTTCPS_H		/* prevent circular inclusions */
+#define XTTCPS_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xttcps_hw.h"
+#include "xstatus.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Configuration options
+ *
+ * Options for the device. Each of the options is bit field, so more than one
+ * options can be specified.
+ *
+ * @{
+ */
+#define XTTCPS_OPTION_EXTERNAL_CLK	0x00000001U 	/**< External clock source */
+#define XTTCPS_OPTION_CLK_EDGE_NEG	0x00000002U	/**< Clock on trailing edge for
+						     external clock*/
+#define XTTCPS_OPTION_INTERVAL_MODE	0x00000004U	/**< Interval mode */
+#define XTTCPS_OPTION_DECREMENT		0x00000008U	/**< Decrement the counter */
+#define XTTCPS_OPTION_MATCH_MODE	0x00000010U	/**< Match mode */
+#define XTTCPS_OPTION_WAVE_DISABLE	0x00000020U 	/**< No waveform output */
+#define XTTCPS_OPTION_WAVE_POLARITY	0x00000040U	/**< Waveform polarity */
+/*@}*/
+
+/**************************** Type Definitions *******************************/
+
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct {
+	u16 DeviceId;	  /**< Unique ID for device */
+	u32 BaseAddress;  /**< Base address for device */
+	u32 InputClockHz; /**< Input clock frequency */
+} XTtcPs_Config;
+
+/**
+ * The XTtcPs driver instance data. The user is required to allocate a
+ * variable of this type for each PS timer/counter device in the system. A
+ * pointer to a variable of this type is then passed to various driver API
+ * functions.
+ */
+typedef struct {
+	XTtcPs_Config Config;	/**< Configuration structure */
+	u32 IsReady;		/**< Device is initialized and ready */
+} XTtcPs;
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*
+ * Internal helper macros
+ */
+#define InstReadReg(InstancePtr, RegOffset) \
+    (Xil_In32(((InstancePtr)->Config.BaseAddress) + (u32)(RegOffset)))
+
+#define InstWriteReg(InstancePtr, RegOffset, Data) \
+    (Xil_Out32(((InstancePtr)->Config.BaseAddress) + (u32)(RegOffset), (u32)(Data)))
+
+/*****************************************************************************/
+/**
+*
+* This function starts the counter/timer without resetting the counter value.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return	None
+*
+* @note		C-style signature:
+*		void XTtcPs_Start(XTtcPs *InstancePtr)
+*
+****************************************************************************/
+#define XTtcPs_Start(InstancePtr)	\
+		InstWriteReg((InstancePtr), XTTCPS_CNT_CNTRL_OFFSET,	\
+		(InstReadReg((InstancePtr), XTTCPS_CNT_CNTRL_OFFSET) &	\
+		 ~XTTCPS_CNT_CNTRL_DIS_MASK))
+
+/*****************************************************************************/
+/**
+*
+* This function stops the counter/timer. This macro may be called at any time
+* to stop the counter. The counter holds the last value until it is reset,
+* restarted or enabled.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return	None
+*
+* @note		C-style signature:
+*		void XTtcPs_Stop(XTtcPs *InstancePtr)
+*
+****************************************************************************/
+#define XTtcPs_Stop(InstancePtr)		\
+		InstWriteReg((InstancePtr), XTTCPS_CNT_CNTRL_OFFSET,	\
+		(InstReadReg((InstancePtr), XTTCPS_CNT_CNTRL_OFFSET) |	\
+		 XTTCPS_CNT_CNTRL_DIS_MASK))
+
+/*****************************************************************************/
+/**
+*
+* This function checks whether the timer counter has already started.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance
+*
+* @return	Non-zero if the device has started, '0' otherwise.
+*
+* @note		C-style signature:
+*		int XTtcPs_IsStarted(XTtcPs *InstancePtr)
+*
+****************************************************************************/
+#define XTtcPs_IsStarted(InstancePtr) \
+     ((InstReadReg((InstancePtr), XTTCPS_CNT_CNTRL_OFFSET) & \
+       XTTCPS_CNT_CNTRL_DIS_MASK) == 0U)
+
+/*****************************************************************************/
+/**
+*
+* This function returns the current 16-bit counter value. It may be called at
+* any time.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return	16-bit counter value.
+*
+* @note		C-style signature:
+*		u16 XTtcPs_GetCounterValue(XTtcPs *InstancePtr)
+*
+****************************************************************************/
+#define XTtcPs_GetCounterValue(InstancePtr) \
+		(u16)InstReadReg((InstancePtr), XTTCPS_COUNT_VALUE_OFFSET)
+
+/*****************************************************************************/
+/**
+*
+* This function sets the interval value to be used in interval mode.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	Value is the 16-bit value to be set in the interval register.
+*
+* @return	None
+*
+* @note		C-style signature:
+*		void XTtcPs_SetInterval(XTtcPs *InstancePtr, u16 Value)
+*
+****************************************************************************/
+#define XTtcPs_SetInterval(InstancePtr, Value)	\
+		InstWriteReg((InstancePtr), XTTCPS_INTERVAL_VAL_OFFSET, (Value))
+
+/*****************************************************************************/
+/**
+*
+* This function gets the interval value from the interval register.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return	16-bit interval value
+*
+* @note		C-style signature:
+*		u16 XTtcPs_GetInterval(XTtcPs *InstancePtr)
+*
+****************************************************************************/
+#define XTtcPs_GetInterval(InstancePtr) \
+		(u16)InstReadReg((InstancePtr), XTTCPS_INTERVAL_VAL_OFFSET)
+
+/*****************************************************************************/
+/**
+*
+* This macro resets the count register. It may be called at any time. The
+* counter is reset to either 0 or 0xFFFF, or the interval value, depending on
+* the increment/decrement mode. The state of the counter, as started or
+* stopped, is not affected by calling reset.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return	None
+*
+* @note		C-style signature:
+*		void XTtcPs_ResetCounterValue(XTtcPs *InstancePtr)
+*
+****************************************************************************/
+#define XTtcPs_ResetCounterValue(InstancePtr) \
+		InstWriteReg((InstancePtr), XTTCPS_CNT_CNTRL_OFFSET,	\
+		(InstReadReg((InstancePtr), XTTCPS_CNT_CNTRL_OFFSET) | \
+		 (u32)XTTCPS_CNT_CNTRL_RST_MASK))
+
+/*****************************************************************************/
+/**
+*
+* This function enables the interrupts.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	InterruptMask defines which interrupt should be enabled.
+*		Constants are defined in xttcps_hw.h as XTTCPS_IXR_*.
+*		This is a bit mask, all set bits will be enabled, cleared bits
+*		will not be disabled.
+*
+* @return	None.
+*
+* @note
+* C-style signature:
+*	void XTtcPs_EnableInterrupts(XTtcPs *InstancePtr, u32 InterruptMask)
+*
+******************************************************************************/
+#define XTtcPs_EnableInterrupts(InstancePtr, InterruptMask)		\
+		InstWriteReg((InstancePtr), XTTCPS_IER_OFFSET,		\
+		(InstReadReg((InstancePtr), XTTCPS_IER_OFFSET) |	\
+		 (InterruptMask)))
+
+/*****************************************************************************/
+/**
+*
+* This function disables the interrupts.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	InterruptMask defines which interrupt should be disabled.
+*		Constants are defined in xttcps_hw.h as XTTCPS_IXR_*.
+*		This is a bit mask, all set bits will be disabled, cleared bits
+*		will not be disabled.
+*
+* @return	None.
+*
+* @note
+* C-style signature:
+*	void XTtcPs_DisableInterrupts(XTtcPs *InstancePtr, u32 InterruptMask)
+*
+******************************************************************************/
+#define XTtcPs_DisableInterrupts(InstancePtr, InterruptMask) \
+		InstWriteReg((InstancePtr), XTTCPS_IER_OFFSET,	\
+		(InstReadReg((InstancePtr), XTTCPS_IER_OFFSET) &	\
+		 ~(InterruptMask)))
+
+/*****************************************************************************/
+/**
+*
+* This function reads the interrupt status.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return	None.
+*
+* @note		C-style signature:
+*		u32 XTtcPs_GetInterruptStatus(XTtcPs *InstancePtr)
+*
+******************************************************************************/
+#define XTtcPs_GetInterruptStatus(InstancePtr)	 \
+		InstReadReg((InstancePtr), XTTCPS_ISR_OFFSET)
+
+/*****************************************************************************/
+/**
+*
+* This function clears the interrupt status.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	InterruptMask defines which interrupt should be cleared.
+*		Constants are defined in xttcps_hw.h as XTTCPS_IXR_*.
+*		This is a bit mask, all set bits will be cleared, cleared bits
+*		will not be cleared.
+*
+* @return	None.
+*
+* @note
+* C-style signature:
+*	void XTtcPs_ClearInterruptStatus(XTtcPs *InstancePtr, u32 InterruptMask)
+*
+******************************************************************************/
+#define XTtcPs_ClearInterruptStatus(InstancePtr, InterruptMask) \
+		InstWriteReg((InstancePtr), XTTCPS_ISR_OFFSET, \
+		 (InterruptMask))
+
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Initialization functions in xttcps_sinit.c
+ */
+XTtcPs_Config *XTtcPs_LookupConfig(u16 DeviceId);
+
+/*
+ * Required functions, in xttcps.c
+ */
+s32 XTtcPs_CfgInitialize(XTtcPs *InstancePtr,
+         XTtcPs_Config * ConfigPtr, u32 EffectiveAddr);
+
+void XTtcPs_SetMatchValue(XTtcPs *InstancePtr, u8 MatchIndex, u16 Value);
+u16 XTtcPs_GetMatchValue(XTtcPs *InstancePtr, u8 MatchIndex);
+
+void XTtcPs_SetPrescaler(XTtcPs *InstancePtr, u8 PrescalerValue);
+u8 XTtcPs_GetPrescaler(XTtcPs *InstancePtr);
+
+void XTtcPs_CalcIntervalFromFreq(XTtcPs *InstancePtr, u32 Freq,
+        u16 *Interval, u8 *Prescaler);
+
+/*
+ * Functions for options, in file xttcps_options.c
+ */
+s32 XTtcPs_SetOptions(XTtcPs *InstancePtr, u32 Options);
+u32 XTtcPs_GetOptions(XTtcPs *InstancePtr);
+
+/*
+ * Function for self-test, in file xttcps_selftest.c
+ */
+s32 XTtcPs_SelfTest(XTtcPs *InstancePtr);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_g.c
new file mode 100644
index 000000000..10c16eb02
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_g.c
@@ -0,0 +1,111 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xttcps.h"
+
+/*
+* The configuration table for devices
+*/
+
+XTtcPs_Config XTtcPs_ConfigTable[] =
+{
+	{
+		XPAR_PSU_TTC_0_DEVICE_ID,
+		XPAR_PSU_TTC_0_BASEADDR,
+		XPAR_PSU_TTC_0_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_1_DEVICE_ID,
+		XPAR_PSU_TTC_1_BASEADDR,
+		XPAR_PSU_TTC_1_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_2_DEVICE_ID,
+		XPAR_PSU_TTC_2_BASEADDR,
+		XPAR_PSU_TTC_2_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_3_DEVICE_ID,
+		XPAR_PSU_TTC_3_BASEADDR,
+		XPAR_PSU_TTC_3_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_4_DEVICE_ID,
+		XPAR_PSU_TTC_4_BASEADDR,
+		XPAR_PSU_TTC_4_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_5_DEVICE_ID,
+		XPAR_PSU_TTC_5_BASEADDR,
+		XPAR_PSU_TTC_5_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_6_DEVICE_ID,
+		XPAR_PSU_TTC_6_BASEADDR,
+		XPAR_PSU_TTC_6_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_7_DEVICE_ID,
+		XPAR_PSU_TTC_7_BASEADDR,
+		XPAR_PSU_TTC_7_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_8_DEVICE_ID,
+		XPAR_PSU_TTC_8_BASEADDR,
+		XPAR_PSU_TTC_8_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_9_DEVICE_ID,
+		XPAR_PSU_TTC_9_BASEADDR,
+		XPAR_PSU_TTC_9_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_10_DEVICE_ID,
+		XPAR_PSU_TTC_10_BASEADDR,
+		XPAR_PSU_TTC_10_TTC_CLK_FREQ_HZ
+	},
+	{
+		XPAR_PSU_TTC_11_DEVICE_ID,
+		XPAR_PSU_TTC_11_BASEADDR,
+		XPAR_PSU_TTC_11_TTC_CLK_FREQ_HZ
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_hw.h
new file mode 100644
index 000000000..af78bcd67
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_hw.h
@@ -0,0 +1,212 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xttcps_hw.h
+* @addtogroup ttcps_v3_0
+* @{
+*
+* This file defines the hardware interface to one of the three timer counters
+* in the Ps block.
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- -------------------------------------------------
+* 1.00a drg/jz 01/21/10 First release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* 

+*
+******************************************************************************/
+
+#ifndef XTTCPS_HW_H		/* prevent circular inclusions */
+#define XTTCPS_HW_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Register Map
+ *
+ * Register offsets from the base address of the device.
+ *
+ * @{
+ */
+#define XTTCPS_CLK_CNTRL_OFFSET		0x00000000U  /**< Clock Control Register */
+#define XTTCPS_CNT_CNTRL_OFFSET		0x0000000CU  /**< Counter Control Register*/
+#define XTTCPS_COUNT_VALUE_OFFSET	0x00000018U  /**< Current Counter Value */
+#define XTTCPS_INTERVAL_VAL_OFFSET	0x00000024U  /**< Interval Count Value */
+#define XTTCPS_MATCH_0_OFFSET		0x00000030U  /**< Match 1 value */
+#define XTTCPS_MATCH_1_OFFSET		0x0000003CU  /**< Match 2 value */
+#define XTTCPS_MATCH_2_OFFSET		0x00000048U  /**< Match 3 value */
+#define XTTCPS_ISR_OFFSET			0x00000054U  /**< Interrupt Status Register */
+#define XTTCPS_IER_OFFSET			0x00000060U  /**< Interrupt Enable Register */
+/* @} */
+
+/** @name Clock Control Register
+ * Clock Control Register definitions
+ * @{
+ */
+#define XTTCPS_CLK_CNTRL_PS_EN_MASK		0x00000001U  /**< Prescale enable */
+#define XTTCPS_CLK_CNTRL_PS_VAL_MASK	0x0000001EU  /**< Prescale value */
+#define XTTCPS_CLK_CNTRL_PS_VAL_SHIFT			 1U  /**< Prescale shift */
+#define XTTCPS_CLK_CNTRL_PS_DISABLE				16U  /**< Prescale disable */
+#define XTTCPS_CLK_CNTRL_SRC_MASK		0x00000020U  /**< Clock source */
+#define XTTCPS_CLK_CNTRL_EXT_EDGE_MASK	0x00000040U  /**< External Clock edge */
+/* @} */
+
+/** @name Counter Control Register
+ * Counter Control Register definitions
+ * @{
+ */
+#define XTTCPS_CNT_CNTRL_DIS_MASK		0x00000001U /**< Disable the counter */
+#define XTTCPS_CNT_CNTRL_INT_MASK		0x00000002U /**< Interval mode */
+#define XTTCPS_CNT_CNTRL_DECR_MASK		0x00000004U /**< Decrement mode */
+#define XTTCPS_CNT_CNTRL_MATCH_MASK		0x00000008U /**< Match mode */
+#define XTTCPS_CNT_CNTRL_RST_MASK		0x00000010U /**< Reset counter */
+#define XTTCPS_CNT_CNTRL_EN_WAVE_MASK	0x00000020U /**< Enable waveform */
+#define XTTCPS_CNT_CNTRL_POL_WAVE_MASK	0x00000040U /**< Waveform polarity */
+#define XTTCPS_CNT_CNTRL_RESET_VALUE	0x00000021U /**< Reset value */
+/* @} */
+
+/** @name Current Counter Value Register
+ * Current Counter Value Register definitions
+ * @{
+ */
+#define XTTCPS_COUNT_VALUE_MASK		0x0000FFFFU /**< 16-bit counter value */
+/* @} */
+
+/** @name Interval Value Register
+ * Interval Value Register is the maximum value the counter will count up or
+ * down to.
+ * @{
+ */
+#define XTTCPS_INTERVAL_VAL_MASK	0x0000FFFFU /**< 16-bit Interval value*/
+/* @} */
+
+/** @name Match Registers
+ * Definitions for Match registers, each timer counter has three match
+ * registers.
+ * @{
+ */
+#define XTTCPS_MATCH_MASK		0x0000FFFFU /**< 16-bit Match value */
+#define XTTCPS_NUM_MATCH_REG			 3U /**< Num of Match reg */
+/* @} */
+
+/** @name Interrupt Registers
+ * Following register bit mask is for all interrupt registers.
+ *
+ * @{
+ */
+#define XTTCPS_IXR_INTERVAL_MASK	0x00000001U  /**< Interval Interrupt */
+#define XTTCPS_IXR_MATCH_0_MASK		0x00000002U  /**< Match 1 Interrupt */
+#define XTTCPS_IXR_MATCH_1_MASK		0x00000004U  /**< Match 2 Interrupt */
+#define XTTCPS_IXR_MATCH_2_MASK		0x00000008U  /**< Match 3 Interrupt */
+#define XTTCPS_IXR_CNT_OVR_MASK		0x00000010U  /**< Counter Overflow */
+#define XTTCPS_IXR_ALL_MASK			0x0000001FU  /**< All valid Interrupts */
+/* @} */
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* Read the given Timer Counter register.
+*
+* @param	BaseAddress is the base address of the timer counter device.
+* @param	RegOffset is the register offset to be read
+*
+* @return	The 32-bit value of the register
+*
+* @note		C-style signature:
+*		u32 XTtcPs_ReadReg(u32 BaseAddress, u32 RegOffset)
+*
+*****************************************************************************/
+#define XTtcPs_ReadReg(BaseAddress, RegOffset) \
+    (Xil_In32((BaseAddress) + (u32)(RegOffset)))
+
+/****************************************************************************/
+/**
+*
+* Write the given Timer Counter register.
+*
+* @param	BaseAddress is the base address of the timer counter device.
+* @param	RegOffset is the register offset to be written
+* @param	Data is the 32-bit value to write to the register
+*
+* @return	None.
+*
+* @note		C-style signature:
+*		void XTtcPs_WriteReg(XTtcPs BaseAddress, u32 RegOffset,
+*		u32 Data)
+*
+*****************************************************************************/
+#define XTtcPs_WriteReg(BaseAddress, RegOffset, Data) \
+    (Xil_Out32((BaseAddress) + (u32)(RegOffset), (u32)(Data)))
+
+/****************************************************************************/
+/**
+*
+* Calculate a match register offset using the Match Register index.
+*
+* @param	MatchIndex is the 0-2 value of the match register
+*
+* @return	MATCH_N_OFFSET.
+*
+* @note		C-style signature:
+*		u32 XTtcPs_Match_N_Offset(u8 MatchIndex)
+*
+*****************************************************************************/
+#define XTtcPs_Match_N_Offset(MatchIndex) \
+		((u32)XTTCPS_MATCH_0_OFFSET + ((u32)(12U) * (u32)(MatchIndex)))
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+#ifdef __cplusplus
+}
+#endif
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_options.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_options.c
new file mode 100644
index 000000000..532b235c5
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_options.c
@@ -0,0 +1,243 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xttcps_options.c
+* @addtogroup ttcps_v3_0
+* @{
+*
+* This file contains functions to get or set option features for the device.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------
+* 1.00a drg/jz 01/21/10 First release
+* 1.01a nm     03/05/2012 Removed break statement after return to remove
+*                         compilation warnings.
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xttcps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+/*
+ * Create the table of options which are processed to get/set the device
+ * options. These options are table driven to allow easy maintenance and
+ * expansion of the options.
+ */
+typedef struct {
+	u32 Option;
+	u32 Mask;
+	u32 Register;
+} OptionsMap;
+
+static OptionsMap TmrCtrOptionsTable[] = {
+	{XTTCPS_OPTION_EXTERNAL_CLK, XTTCPS_CLK_CNTRL_SRC_MASK,
+	 XTTCPS_CLK_CNTRL_OFFSET},
+	{XTTCPS_OPTION_CLK_EDGE_NEG, XTTCPS_CLK_CNTRL_EXT_EDGE_MASK,
+	 XTTCPS_CLK_CNTRL_OFFSET},
+	{XTTCPS_OPTION_INTERVAL_MODE, XTTCPS_CNT_CNTRL_INT_MASK,
+	 XTTCPS_CNT_CNTRL_OFFSET},
+	{XTTCPS_OPTION_DECREMENT, XTTCPS_CNT_CNTRL_DECR_MASK,
+	 XTTCPS_CNT_CNTRL_OFFSET},
+	{XTTCPS_OPTION_MATCH_MODE, XTTCPS_CNT_CNTRL_MATCH_MASK,
+	 XTTCPS_CNT_CNTRL_OFFSET},
+	{XTTCPS_OPTION_WAVE_DISABLE, XTTCPS_CNT_CNTRL_EN_WAVE_MASK,
+	 XTTCPS_CNT_CNTRL_OFFSET},
+	{XTTCPS_OPTION_WAVE_POLARITY, XTTCPS_CNT_CNTRL_POL_WAVE_MASK,
+	 XTTCPS_CNT_CNTRL_OFFSET},
+};
+
+#define XTTCPS_NUM_TMRCTR_OPTIONS (sizeof(TmrCtrOptionsTable) / \
+				sizeof(OptionsMap))
+
+/*****************************************************************************/
+/**
+*
+* This function sets the options for the TTC device.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+* @param	Options contains the specified options to be set. This is a bit
+*		mask where a 1 means to turn the option on, and a 0 means to
+*		turn the option off. One or more bit values may be contained
+*		in the mask. See the bit definitions named XTTCPS_*_OPTION in
+*		the file xttcps.h.
+*
+* @return
+*		- XST_SUCCESS if options are successfully set.
+*		- XST_FAILURE if any of the options are unknown.
+*
+* @note		None
+*
+******************************************************************************/
+s32 XTtcPs_SetOptions(XTtcPs *InstancePtr, u32 Options)
+{
+	u32 CountReg;
+	u32 ClockReg;
+	u32 Index;
+	s32 Status = XST_SUCCESS;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	ClockReg = XTtcPs_ReadReg(InstancePtr->Config.BaseAddress,
+				    XTTCPS_CLK_CNTRL_OFFSET);
+	CountReg = XTtcPs_ReadReg(InstancePtr->Config.BaseAddress,
+				    XTTCPS_CNT_CNTRL_OFFSET);
+
+	/*
+	 * Loop through the options table, turning the option on or off
+	 * depending on whether the bit is set in the incoming options flag.
+	 */
+	for (Index = 0U; Index < XTTCPS_NUM_TMRCTR_OPTIONS; Index++) {
+		if(Status != (s32)XST_FAILURE) {
+			if ((Options & TmrCtrOptionsTable[Index].Option) != (u32)0) {
+
+			switch (TmrCtrOptionsTable[Index].Register) {
+
+			case XTTCPS_CLK_CNTRL_OFFSET:
+				/* Add option */
+				ClockReg |= TmrCtrOptionsTable[Index].Mask;
+				break;
+
+			case XTTCPS_CNT_CNTRL_OFFSET:
+				/* Add option */
+				CountReg |= TmrCtrOptionsTable[Index].Mask;
+				break;
+
+			default:
+				Status = XST_FAILURE;
+				break;
+			}
+		}
+		else {
+			switch (TmrCtrOptionsTable[Index].Register) {
+
+			case XTTCPS_CLK_CNTRL_OFFSET:
+				/* Remove option*/
+				ClockReg &= ~TmrCtrOptionsTable[Index].Mask;
+				break;
+
+			case XTTCPS_CNT_CNTRL_OFFSET:
+				/* Remove option*/
+				CountReg &= ~TmrCtrOptionsTable[Index].Mask;
+				break;
+
+			default:
+				Status = XST_FAILURE;
+				break;
+				}
+			}
+		}
+	}
+
+	/*
+	 * Now write the registers. Leave it to the upper layers to restart the
+	 * device.
+	 */
+	if (Status != (s32)XST_FAILURE ) {
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_CLK_CNTRL_OFFSET, ClockReg);
+		XTtcPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XTTCPS_CNT_CNTRL_OFFSET, CountReg);
+	}
+
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function gets the settings for the options for the TTC device.
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return
+*
+* The return u32 contains the specified options that are set. This is a bit
+* mask where a '1' means the option is on, and a'0' means the option is off.
+* One or more bit values may be contained in the mask. See the bit definitions
+* named XTTCPS_*_OPTION in the file xttcps.h.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 XTtcPs_GetOptions(XTtcPs *InstancePtr)
+{
+	u32 OptionsFlag = 0U;
+	u32 Register;
+	u32 Index;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+
+	/*
+	 * Loop through the options table to determine which options are set
+	 */
+	for (Index = 0U; Index < XTTCPS_NUM_TMRCTR_OPTIONS; Index++) {
+		/*
+		 * Get the control register to determine which options are
+		 * currently set.
+		 */
+		Register = XTtcPs_ReadReg(InstancePtr->Config.BaseAddress,
+					      TmrCtrOptionsTable[Index].
+					      Register);
+
+		if ((Register & TmrCtrOptionsTable[Index].Mask) != (u32)0) {
+			OptionsFlag |= TmrCtrOptionsTable[Index].Option;
+		}
+	}
+
+	return OptionsFlag;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_selftest.c
new file mode 100644
index 000000000..4923df667
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_selftest.c
@@ -0,0 +1,109 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xttcps_selftest.c
+* @addtogroup ttcps_v3_0
+* @{
+*
+* This file contains the implementation of self test function for the
+* XTtcPs driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------
+* 1.00a drg/jz 01/21/10 First release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xttcps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+*
+* Runs a self-test on the driver/device.
+*
+*
+* @param	InstancePtr is a pointer to the XTtcPs instance.
+*
+* @return
+*
+*	- XST_SUCCESS if successful
+*	- XST_FAILURE indicates a register did not read or write correctly
+*
+* @note		This test fails if it is not called right after initialization.
+*
+******************************************************************************/
+s32 XTtcPs_SelfTest(XTtcPs *InstancePtr)
+{
+	s32 Status;
+	u32 TempReg;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * All the TTC registers should be in their default state right now.
+	 */
+	TempReg = XTtcPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XTTCPS_CNT_CNTRL_OFFSET);
+	if (XTTCPS_CNT_CNTRL_RESET_VALUE != (u32)TempReg) {
+		Status = XST_FAILURE;
+	}
+	else {
+		Status = XST_SUCCESS;
+	}
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_sinit.c
new file mode 100644
index 000000000..ef3c6ea6b
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ttcps_v3_1/src/xttcps_sinit.c
@@ -0,0 +1,98 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xttcps_sinit.c
+* @addtogroup ttcps_v3_0
+* @{
+*
+* The implementation of the XTtcPs driver's static initialization functionality.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------
+* 1.00a drg/jz 01/21/10 First release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xttcps.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+extern XTtcPs_Config XTtcPs_ConfigTable[XPAR_XTTCPS_NUM_INSTANCES];
+
+/*****************************************************************************/
+/**
+*
+* Looks up the device configuration based on the unique device ID. A table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId contains the unique ID of the device
+*
+* @return
+*
+* A pointer to the configuration found or NULL if the specified device ID was
+* not found. See xttcps.h for the definition of XTtcPs_Config.
+*
+* @note		None.
+*
+******************************************************************************/
+XTtcPs_Config *XTtcPs_LookupConfig(u16 DeviceId)
+{
+	XTtcPs_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index = 0U; Index < (u32)XPAR_XTTCPS_NUM_INSTANCES; Index++) {
+		if (XTtcPs_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XTtcPs_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XTtcPs_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/Makefile
new file mode 100644
index 000000000..88b1e625c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner xuartps_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling uartps"
+
+xuartps_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: xuartps_includes
+
+xuartps_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps.c
new file mode 100644
index 000000000..a338d1f09
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps.c
@@ -0,0 +1,644 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xuartps.c
+* @addtogroup uartps_v3_1
+* @{
+*
+* This file contains the implementation of the interface functions for XUartPs
+* driver. Refer to the header file xuartps.h for more detailed information.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	 Changes
+* ----- ------ -------- ----------------------------------------------
+* 1.00	drg/jz 01/13/10 First Release
+* 2.2   hk     06/23/14 SW reset of RX and TX should be done when changing
+*                       baud rate. CR# 804281.
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn    04/10/15 Modified code for latest RTL changes.
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+
+#include "xstatus.h"
+#include "xuartps.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions ****************************/
+
+/* The following constant defines the amount of error that is allowed for
+ * a specified baud rate. This error is the difference between the actual
+ * baud rate that will be generated using the specified clock and the
+ * desired baud rate.
+ */
+#define XUARTPS_MAX_BAUD_ERROR_RATE		 3U	/* max % error allowed */
+
+/**************************** Type Definitions ******************************/
+
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+
+/************************** Function Prototypes *****************************/
+
+static void XUartPs_StubHandler(void *CallBackRef, u32 Event,
+				 u32 ByteCount);
+
+u32  XUartPs_SendBuffer(XUartPs *InstancePtr);
+
+u32  XUartPs_ReceiveBuffer(XUartPs *InstancePtr);
+
+/************************** Variable Definitions ****************************/
+
+/****************************************************************************/
+/**
+*
+* Initializes a specific XUartPs instance such that it is ready to be used.
+* The data format of the device is setup for 8 data bits, 1 stop bit, and no
+* parity by default. The baud rate is set to a default value specified by
+* Config->DefaultBaudRate if set, otherwise it is set to 19.2K baud. The
+* receive FIFO threshold is set for 8 bytes. The default operating mode of the
+* driver is polled mode.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	Config is a reference to a structure containing information
+*		about a specific XUartPs driver.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. The caller is responsible for keeping the address
+*		mapping from EffectiveAddr to the device physical base address
+*		unchanged once this function is invoked. Unexpected errors may
+*		occur if the address mapping changes after this function is
+*		called. If address translation is not used, pass in the physical
+*		address instead.
+*
+* @return
+*
+*		- XST_SUCCESS if initialization was successful
+*		- XST_UART_BAUD_ERROR if the baud rate is not possible because
+*		  the inputclock frequency is not divisible with an acceptable
+*		  amount of error
+*
+* @note
+*
+* The default configuration for the UART after initialization is:
+*
+* - 19,200 bps or XPAR_DFT_BAUDRATE if defined
+* - 8 data bits
+* - 1 stop bit
+* - no parity
+* - FIFO's are enabled with a receive threshold of 8 bytes
+* - The RX timeout is enabled with a timeout of 1 (4 char times)
+*
+*   All interrupts are disabled.
+*
+*****************************************************************************/
+s32 XUartPs_CfgInitialize(XUartPs *InstancePtr,
+				   XUartPs_Config * Config, u32 EffectiveAddr)
+{
+	s32 Status;
+	u32 ModeRegister;
+	u32 BaudRate;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(Config != NULL);
+
+	/* Setup the driver instance using passed in parameters */
+	InstancePtr->Config.BaseAddress = EffectiveAddr;
+	InstancePtr->Config.InputClockHz = Config->InputClockHz;
+	InstancePtr->Config.ModemPinsConnected = Config->ModemPinsConnected;
+
+	/* Initialize other instance data to default values */
+	InstancePtr->Handler = XUartPs_StubHandler;
+
+	InstancePtr->SendBuffer.NextBytePtr = NULL;
+	InstancePtr->SendBuffer.RemainingBytes = 0U;
+	InstancePtr->SendBuffer.RequestedBytes = 0U;
+
+	InstancePtr->ReceiveBuffer.NextBytePtr = NULL;
+	InstancePtr->ReceiveBuffer.RemainingBytes = 0U;
+	InstancePtr->ReceiveBuffer.RequestedBytes = 0U;
+
+	/* Initialize the platform data */
+	InstancePtr->Platform = XGetPlatform_Info();
+
+	InstancePtr->is_rxbs_error = 0U;
+
+	/* Flag that the driver instance is ready to use */
+	InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+
+	/*
+	 * Set the default baud rate here, can be changed prior to
+	 * starting the device
+	 */
+	BaudRate = (u32)XUARTPS_DFT_BAUDRATE;
+	Status = XUartPs_SetBaudRate(InstancePtr, BaudRate);
+	if (Status != (s32)XST_SUCCESS) {
+		InstancePtr->IsReady = 0U;
+	} else {
+
+		/*
+		 * Set up the default data format: 8 bit data, 1 stop bit, no
+		 * parity
+		 */
+		ModeRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+					  XUARTPS_MR_OFFSET);
+
+		/* Mask off what's already there */
+		ModeRegister &= (~((u32)XUARTPS_MR_CHARLEN_MASK |
+						 (u32)XUARTPS_MR_STOPMODE_MASK |
+						 (u32)XUARTPS_MR_PARITY_MASK));
+
+		/* Set the register value to the desired data format */
+		ModeRegister |=	((u32)XUARTPS_MR_CHARLEN_8_BIT |
+						 (u32)XUARTPS_MR_STOPMODE_1_BIT |
+						 (u32)XUARTPS_MR_PARITY_NONE);
+
+		/* Write the mode register out */
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_MR_OFFSET,
+				   ModeRegister);
+
+		/* Set the RX FIFO trigger at 8 data bytes. */
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XUARTPS_RXWM_OFFSET, 0x08U);
+
+		/* Set the RX timeout to 1, which will be 4 character time */
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XUARTPS_RXTOUT_OFFSET, 0x01U);
+
+		/* Disable all interrupts, polled mode is the default */
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_IDR_OFFSET,
+				   XUARTPS_IXR_MASK);
+
+		Status = XST_SUCCESS;
+	}
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* This functions sends the specified buffer using the device in either
+* polled or interrupt driven mode. This function is non-blocking, if the device
+* is busy sending data, it will return and indicate zero bytes were sent.
+* Otherwise, it fills the TX FIFO as much as it can, and return the number of
+* bytes sent.
+*
+* In a polled mode, this function will only send as much data as TX FIFO can
+* buffer. The application may need to call it repeatedly to send the entire
+* buffer.
+*
+* In interrupt mode, this function will start sending the specified buffer,
+* then the interrupt handler will continue sending data until the entire
+* buffer has been sent. A callback function, as specified by the application,
+* will be called to indicate the completion of sending.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	BufferPtr is pointer to a buffer of data to be sent.
+* @param  	NumBytes contains the number of bytes to be sent. A value of
+*		zero will stop a previous send operation that is in progress
+*		in interrupt mode. Any data that was already put into the
+*		transmit FIFO will be sent.
+*
+* @return	The number of bytes actually sent.
+*
+* @note
+*
+* The number of bytes is not asserted so that this function may be called with
+* a value of zero to stop an operation that is already in progress.
+* 


+*
+*****************************************************************************/
+u32 XUartPs_Send(XUartPs *InstancePtr, u8 *BufferPtr,
+			   u32 NumBytes)
+{
+	u32 BytesSent;
+
+	/* Asserts validate the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(BufferPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Disable the UART transmit interrupts to allow this call to stop a
+	 * previous operation that may be interrupt driven.
+	 */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_IDR_OFFSET,
+					  (XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_TXFULL));
+
+	/* Setup the buffer parameters */
+	InstancePtr->SendBuffer.RequestedBytes = NumBytes;
+	InstancePtr->SendBuffer.RemainingBytes = NumBytes;
+	InstancePtr->SendBuffer.NextBytePtr = BufferPtr;
+
+	/*
+	 * Transmit interrupts will be enabled in XUartPs_SendBuffer(), after
+	 * filling the TX FIFO.
+	 */
+	BytesSent = XUartPs_SendBuffer(InstancePtr);
+
+	return BytesSent;
+}
+
+/****************************************************************************/
+/**
+*
+* This function attempts to receive a specified number of bytes of data
+* from the device and store it into the specified buffer. This function works
+* for both polled or interrupt driven modes. It is non-blocking.
+*
+* In a polled mode, this function will only receive the data already in the
+* RX FIFO. The application may need to call it repeatedly to receive the
+* entire buffer. Polled mode is the default mode of operation for the device.
+*
+* In interrupt mode, this function will start the receiving, if not the entire
+* buffer has been received, the interrupt handler will continue receiving data
+* until the entire buffer has been received. A callback function, as specified
+* by the application, will be called to indicate the completion of the
+* receiving or error conditions.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+* @param	BufferPtr is pointer to buffer for data to be received into
+* @param	NumBytes is the number of bytes to be received. A value of zero
+*		will stop a previous receive operation that is in progress in
+*		interrupt mode.
+*
+* @return	The number of bytes received.
+*
+* @note
+*
+* The number of bytes is not asserted so that this function may be called
+* with a value of zero to stop an operation that is already in progress.
+*
+*****************************************************************************/
+u32 XUartPs_Recv(XUartPs *InstancePtr,
+			  u8 *BufferPtr, u32 NumBytes)
+{
+	u32 ReceivedCount;
+	u32 ImrRegister;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(BufferPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Disable all the interrupts.
+	 * This stops a previous operation that may be interrupt driven
+	 */
+	ImrRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XUARTPS_IMR_OFFSET);
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_IDR_OFFSET,
+		XUARTPS_IXR_MASK);
+
+	/* Setup the buffer parameters */
+	InstancePtr->ReceiveBuffer.RequestedBytes = NumBytes;
+	InstancePtr->ReceiveBuffer.RemainingBytes = NumBytes;
+	InstancePtr->ReceiveBuffer.NextBytePtr = BufferPtr;
+
+	/* Receive the data from the device */
+	ReceivedCount = XUartPs_ReceiveBuffer(InstancePtr);
+
+	/* Restore the interrupt state */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_IER_OFFSET,
+		ImrRegister);
+
+	return ReceivedCount;
+}
+
+/****************************************************************************/
+/*
+*
+* This function sends a buffer that has been previously specified by setting
+* up the instance variables of the instance. This function is an internal
+* function for the XUartPs driver such that it may be called from a shell
+* function that sets up the buffer or from an interrupt handler.
+*
+* This function sends the specified buffer in either polled or interrupt
+* driven modes. This function is non-blocking.
+*
+* In a polled mode, this function only sends as much data as the TX FIFO
+* can buffer. The application may need to call it repeatedly to send the
+* entire buffer.
+*
+* In interrupt mode, this function starts the sending of the buffer, if not
+* the entire buffer has been sent, then the interrupt handler continues the
+* sending until the entire buffer has been sent. A callback function, as
+* specified by the application, will be called to indicate the completion of
+* sending.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+*
+* @return	The number of bytes actually sent
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XUartPs_SendBuffer(XUartPs *InstancePtr)
+{
+	u32 SentCount = 0U;
+	u32 ImrRegister;
+
+	/*
+	 * If the TX FIFO is full, send nothing.
+	 * Otherwise put bytes into the TX FIFO unil it is full, or all of the
+	 * data has been put into the FIFO.
+	 */
+	while ((!XUartPs_IsTransmitFull(InstancePtr->Config.BaseAddress)) &&
+		   (InstancePtr->SendBuffer.RemainingBytes > SentCount)) {
+
+		/* Fill the FIFO from the buffer */
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   XUARTPS_FIFO_OFFSET,
+				   ((u32)InstancePtr->SendBuffer.
+				   NextBytePtr[SentCount]));
+
+		/* Increment the send count. */
+		SentCount++;
+	}
+
+	/* Update the buffer to reflect the bytes that were sent from it */
+	InstancePtr->SendBuffer.NextBytePtr += SentCount;
+	InstancePtr->SendBuffer.RemainingBytes -= SentCount;
+
+	/*
+	 * If interrupts are enabled as indicated by the receive interrupt, then
+	 * enable the TX FIFO empty interrupt, so further action can be taken
+	 * for this sending.
+	 */
+	ImrRegister =
+		XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XUARTPS_IMR_OFFSET);
+	if (((ImrRegister & XUARTPS_IXR_RXFULL) != (u32)0) ||
+		((ImrRegister & XUARTPS_IXR_RXEMPTY) != (u32)0)||
+		((ImrRegister & XUARTPS_IXR_RXOVR) != (u32)0)) {
+
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+					   XUARTPS_IER_OFFSET,
+					   ImrRegister | (u32)XUARTPS_IXR_TXEMPTY);
+	}
+
+	return SentCount;
+}
+
+/****************************************************************************/
+/*
+*
+* This function receives a buffer that has been previously specified by setting
+* up the instance variables of the instance. This function is an internal
+* function, and it may be called from a shell function that sets up the buffer
+* or from an interrupt handler.
+*
+* This function attempts to receive a specified number of bytes from the
+* device and store it into the specified buffer. This function works for
+* either polled or interrupt driven modes. It is non-blocking.
+*
+* In polled mode, this function only receives as much data as in the RX FIFO.
+* The application may need to call it repeatedly to receive the entire buffer.
+* Polled mode is the default mode for the driver.
+*
+* In interrupt mode, this function starts the receiving, if not the entire
+* buffer has been received, the interrupt handler will continue until the
+* entire buffer has been received. A callback function, as specified by the
+* application, will be called to indicate the completion of the receiving or
+* error conditions.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+*
+* @return	The number of bytes received.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XUartPs_ReceiveBuffer(XUartPs *InstancePtr)
+{
+	u32 CsrRegister;
+	u32 ReceivedCount = 0U;
+	u32 ByteStatusValue, EventData;
+	u32 Event;
+
+	/*
+	 * Read the Channel Status Register to determine if there is any data in
+	 * the RX FIFO
+	 */
+	CsrRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				XUARTPS_SR_OFFSET);
+
+	/*
+	 * Loop until there is no more data in RX FIFO or the specified
+	 * number of bytes has been received
+	 */
+	while((ReceivedCount <= InstancePtr->ReceiveBuffer.RemainingBytes)&&
+		(((CsrRegister & XUARTPS_SR_RXEMPTY) == (u32)0))){
+
+		if (InstancePtr->is_rxbs_error) {
+			ByteStatusValue = XUartPs_ReadReg(
+						InstancePtr->Config.BaseAddress,
+						XUARTPS_RXBS_OFFSET);
+			if((ByteStatusValue & XUARTPS_RXBS_MASK)!= (u32)0) {
+				EventData = ByteStatusValue;
+				Event = XUARTPS_EVENT_PARE_FRAME_BRKE;
+				/*
+				 * Call the application handler to indicate that there is a receive
+				 * error or a break interrupt, if the application cares about the
+				 * error it call a function to get the last errors.
+				 */
+				InstancePtr->Handler(InstancePtr->CallBackRef,
+							Event, EventData);
+			}
+		}
+
+		InstancePtr->ReceiveBuffer.NextBytePtr[ReceivedCount] =
+			XUartPs_ReadReg(InstancePtr->Config.
+				  BaseAddress,
+				  XUARTPS_FIFO_OFFSET);
+
+		ReceivedCount++;
+
+		CsrRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+								XUARTPS_SR_OFFSET);
+	}
+	InstancePtr->is_rxbs_error = 0;
+	/*
+	 * Update the receive buffer to reflect the number of bytes just
+	 * received
+	 */
+	if(InstancePtr->ReceiveBuffer.NextBytePtr != NULL){
+		InstancePtr->ReceiveBuffer.NextBytePtr += ReceivedCount;
+	}
+	InstancePtr->ReceiveBuffer.RemainingBytes -= ReceivedCount;
+
+	return ReceivedCount;
+}
+
+/*****************************************************************************/
+/**
+*
+* Sets the baud rate for the device. Checks the input value for
+* validity and also verifies that the requested rate can be configured to
+* within the maximum error range specified by XUARTPS_MAX_BAUD_ERROR_RATE.
+* If the provided rate is not possible, the current setting is unchanged.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+* @param	BaudRate to be set
+*
+* @return
+*		- XST_SUCCESS if everything configured as expected
+*		- XST_UART_BAUD_ERROR if the requested rate is not available
+*		  because there was too much error
+*
+* @note		None.
+*
+*****************************************************************************/
+s32 XUartPs_SetBaudRate(XUartPs *InstancePtr, u32 BaudRate)
+{
+	u32 IterBAUDDIV;	/* Iterator for available baud divisor values */
+	u32 BRGR_Value;		/* Calculated value for baud rate generator */
+	u32 CalcBaudRate;	/* Calculated baud rate */
+	u32 BaudError;		/* Diff between calculated and requested baud rate */
+	u32 Best_BRGR = 0U;	/* Best value for baud rate generator */
+	u8 Best_BAUDDIV = 0U;	/* Best value for baud divisor */
+	u32 Best_Error = 0xFFFFFFFFU;
+	u32 PercentError;
+	u32 ModeReg;
+	u32 InputClk;
+
+	/* Asserts validate the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid(BaudRate <= (u32)XUARTPS_MAX_RATE);
+	Xil_AssertNonvoid(BaudRate >= (u32)XUARTPS_MIN_RATE);
+
+	/*
+	 * Make sure the baud rate is not impossilby large.
+	 * Fastest possible baud rate is Input Clock / 2.
+	 */
+	if ((BaudRate * 2) > InstancePtr->Config.InputClockHz) {
+		return XST_UART_BAUD_ERROR;
+	}
+	/* Check whether the input clock is divided by 8 */
+	ModeReg = XUartPs_ReadReg( InstancePtr->Config.BaseAddress,
+				 XUARTPS_MR_OFFSET);
+
+	InputClk = InstancePtr->Config.InputClockHz;
+	if(ModeReg & XUARTPS_MR_CLKSEL) {
+		InputClk = InstancePtr->Config.InputClockHz / 8;
+	}
+
+	/*
+	 * Determine the Baud divider. It can be 4to 254.
+	 * Loop through all possible combinations
+	 */
+	for (IterBAUDDIV = 4; IterBAUDDIV < 255; IterBAUDDIV++) {
+
+		/* Calculate the value for BRGR register */
+		BRGR_Value = InputClk / (BaudRate * (IterBAUDDIV + 1));
+
+		/* Calculate the baud rate from the BRGR value */
+		CalcBaudRate = InputClk/ (BRGR_Value * (IterBAUDDIV + 1));
+
+		/* Avoid unsigned integer underflow */
+		if (BaudRate > CalcBaudRate) {
+			BaudError = BaudRate - CalcBaudRate;
+		}
+		else {
+			BaudError = CalcBaudRate - BaudRate;
+		}
+
+		/* Find the calculated baud rate closest to requested baud rate. */
+		if (Best_Error > BaudError) {
+
+			Best_BRGR = BRGR_Value;
+			Best_BAUDDIV = IterBAUDDIV;
+			Best_Error = BaudError;
+		}
+	}
+
+	/* Make sure the best error is not too large. */
+	PercentError = (Best_Error * 100) / BaudRate;
+	if (XUARTPS_MAX_BAUD_ERROR_RATE < PercentError) {
+		return XST_UART_BAUD_ERROR;
+	}
+
+	/* Disable TX and RX to avoid glitches when setting the baud rate. */
+	XUartPs_DisableUart(InstancePtr);
+
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XUARTPS_BAUDGEN_OFFSET, Best_BRGR);
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XUARTPS_BAUDDIV_OFFSET, Best_BAUDDIV);
+
+	/* RX and TX SW reset */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_CR_OFFSET,
+				XUARTPS_CR_TXRST | XUARTPS_CR_RXRST);
+
+	/* Enable device */
+	XUartPs_EnableUart(InstancePtr);
+
+	InstancePtr->BaudRate = BaudRate;
+
+	return XST_SUCCESS;
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function is a stub handler that is the default handler such that if the
+* application has not set the handler when interrupts are enabled, this
+* function will be called.
+*
+* @param	CallBackRef is unused by this function.
+* @param	Event is unused by this function.
+* @param	ByteCount is unused by this function.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void XUartPs_StubHandler(void *CallBackRef, u32 Event,
+				 u32 ByteCount)
+{
+	(void *) CallBackRef;
+	(void) Event;
+	(void) ByteCount;
+	/* Assert occurs always since this is a stub and should never be called */
+	Xil_AssertVoidAlways();
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps.h
new file mode 100644
index 000000000..6bd42b21c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps.h
@@ -0,0 +1,511 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xuartps.h
+* @addtogroup uartps_v3_1
+* @{
+* @details
+*
+* This driver supports the following features:
+*
+* - Dynamic data format (baud rate, data bits, stop bits, parity)
+* - Polled mode
+* - Interrupt driven mode
+* - Transmit and receive FIFOs (32 byte FIFO depth)
+* - Access to the external modem control lines
+*
+* Initialization & Configuration
+*
+* The XUartPs_Config structure is used by the driver to configure itself.
+* Fields inside this structure are properties of XUartPs based on its hardware
+* build.
+*
+* To support multiple runtime loading and initialization strategies employed
+* by various operating systems, the driver instance can be initialized in the
+* following way:
+*
+*   - XUartPs_CfgInitialize(InstancePtr, CfgPtr, EffectiveAddr) - Uses a
+*	 configuration structure provided by the caller. If running in a system
+*	 with address translation, the parameter EffectiveAddr should be the
+* 	  virtual address.
+*
+* Baud Rate
+*
+* The UART has an internal baud rate generator, which furnishes the baud rate
+* clock for both the receiver and the transmitter. Ther input clock frequency
+* can be either the master clock or the master clock divided by 8, configured
+* through the mode register.
+*
+* Accompanied with the baud rate divider register, the baud rate is determined
+* by:
+* 
+*	baud_rate = input_clock / (bgen * (bdiv + 1)
+* 

+* where bgen is the value of the baud rate generator, and bdiv is the value of
+* baud rate divider.
+*
+* Interrupts
+*
+* The FIFOs are not flushed when the driver is initialized, but a function is
+* provided to allow the user to reset the FIFOs if desired.
+*
+* The driver defaults to no interrupts at initialization such that interrupts
+* must be enabled if desired. An interrupt is generated for one of the
+* following conditions.
+*
+* - A change in the modem signals
+* - Data in the receive FIFO for a configuable time without receiver activity
+* - A parity error
+* - A framing error
+* - An overrun error
+* - Transmit FIFO is full
+* - Transmit FIFO is empty
+* - Receive FIFO is full
+* - Receive FIFO is empty
+* - Data in the receive FIFO equal to the receive threshold
+*
+* The application can control which interrupts are enabled using the
+* XUartPs_SetInterruptMask() function.
+*
+* In order to use interrupts, it is necessary for the user to connect the
+* driver interrupt handler, XUartPs_InterruptHandler(), to the interrupt
+* system of the application. A separate handler should be provided by the
+* application to communicate with the interrupt system, and conduct
+* application specific interrupt handling. An application registers its own
+* handler through the XUartPs_SetHandler() function.
+*
+* Data Transfer
+*
+* The functions, XUartPs_Send() and XUartPs_Recv(), are provided in the
+* driver to allow data to be sent and received. They can be used in either
+* polled or interrupt mode.
+*
+* @note
+*
+* The default configuration for the UART after initialization is:
+*
+* - 9,600 bps or XPAR_DFT_BAUDRATE if defined
+* - 8 data bits
+* - 1 stop bit
+* - no parity
+* - FIFO's are enabled with a receive threshold of 8 bytes
+* - The RX timeout is enabled with a timeout of 1 (4 char times)
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- ----------------------------------------------
+* 1.00a	drg/jz 01/12/10 First Release
+* 1.00a sdm    09/27/11 Fixed compiler warnings and also a bug
+*		        in XUartPs_SetFlowDelay where the value was not
+*			being written to the register.
+* 1.01a sdm    12/20/11 Removed the InputClockHz parameter from the XUartPs
+*			instance structure and the driver is updated to use
+*			InputClockHz parameter from the XUartPs_Config config
+*			structure.
+*			Added a parameter to XUartPs_Config structure which
+*			specifies whether the user has selected Modem pins
+*			to be connected to MIO or FMIO.
+*			Added the tcl file to generate the xparameters.h
+* 1.02a sg     05/16/12	Changed XUARTPS_RXWM_MASK to 0x3F for CR 652540 fix.
+* 1.03a sg     07/16/12 Updated XUARTPS_FORMAT_7_BITS and XUARTPS_FORMAT_6_BITS
+*			with the correct values for CR 666724
+* 			Added defines for XUARTPS_IXR_TOVR,  XUARTPS_IXR_TNFUL
+*			and XUARTPS_IXR_TTRIG.
+*			Modified the name of these defines
+*			XUARTPS_MEDEMSR_DCDX to XUARTPS_MODEMSR_DDCD
+*			XUARTPS_MEDEMSR_RIX to XUARTPS_MODEMSR_TERI
+*			XUARTPS_MEDEMSR_DSRX to XUARTPS_MODEMSR_DDSR
+*			XUARTPS_MEDEMSR_CTSX to XUARTPS_MODEMSR_DCTS
+* 1.05a hk     08/22/13 Added API for uart reset and related
+*			constant definitions.
+* 2.0   hk      03/07/14 Version number revised.
+* 2.1   hk     04/16/14 Change XUARTPS_MAX_RATE to 921600. CR# 780625.
+* 2.2   hk     06/23/14 SW reset of RX and TX should be done when changing
+*                       baud rate. CR# 804281.
+* 3.0   vm     12/09/14 Modified source code according to misrac guideline.
+*			Support for Zynq Ultrascale Mp added.
+* 3.1	kvn    04/10/15 Modified code for latest RTL changes. Also added
+*						platform variable in driver instance structure.
+* 3.1   adk   14/03/16  Include interrupt examples in the peripheral test when
+*			uart is connected to a valid interrupt controller CR#946803.
+*
+* 

+*
+*****************************************************************************/
+
+#ifndef XUARTPS_H		/* prevent circular inclusions */
+#define XUARTPS_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files ********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xstatus.h"
+#include "xuartps_hw.h"
+#include "xplatform_info.h"
+
+/************************** Constant Definitions ****************************/
+
+/*
+ * The following constants indicate the max and min baud rates and these
+ * numbers are based only on the testing that has been done. The hardware
+ * is capable of other baud rates.
+ */
+#define XUARTPS_MAX_RATE	 921600U
+#define XUARTPS_MIN_RATE	 110U
+
+#define XUARTPS_DFT_BAUDRATE  115200U   /* Default baud rate */
+
+/** @name Configuration options
+ * @{
+ */
+/**
+ * These constants specify the options that may be set or retrieved
+ * with the driver, each is a unique bit mask such that multiple options
+ * may be specified.  These constants indicate the available options
+ * in active state.
+ *
+ */
+
+#define XUARTPS_OPTION_SET_BREAK	0x0080U /**< Starts break transmission */
+#define XUARTPS_OPTION_STOP_BREAK	0x0040U /**< Stops break transmission */
+#define XUARTPS_OPTION_RESET_TMOUT	0x0020U /**< Reset the receive timeout */
+#define XUARTPS_OPTION_RESET_TX		0x0010U /**< Reset the transmitter */
+#define XUARTPS_OPTION_RESET_RX		0x0008U /**< Reset the receiver */
+#define XUARTPS_OPTION_ASSERT_RTS	0x0004U /**< Assert the RTS bit */
+#define XUARTPS_OPTION_ASSERT_DTR	0x0002U /**< Assert the DTR bit */
+#define XUARTPS_OPTION_SET_FCM		0x0001U /**< Turn on flow control mode */
+/*@}*/
+
+
+/** @name Channel Operational Mode
+ *
+ * The UART can operate in one of four modes: Normal, Local Loopback, Remote
+ * Loopback, or automatic echo.
+ *
+ * @{
+ */
+
+#define XUARTPS_OPER_MODE_NORMAL		(u8)0x00U	/**< Normal Mode */
+#define XUARTPS_OPER_MODE_AUTO_ECHO		(u8)0x01U	/**< Auto Echo Mode */
+#define XUARTPS_OPER_MODE_LOCAL_LOOP	(u8)0x02U	/**< Local Loopback Mode */
+#define XUARTPS_OPER_MODE_REMOTE_LOOP	(u8)0x03U	/**< Remote Loopback Mode */
+
+/* @} */
+
+/** @name Data format values
+ *
+ * These constants specify the data format that the driver supports.
+ * The data format includes the number of data bits, the number of stop
+ * bits and parity.
+ *
+ * @{
+ */
+#define XUARTPS_FORMAT_8_BITS		0U /**< 8 data bits */
+#define XUARTPS_FORMAT_7_BITS		2U /**< 7 data bits */
+#define XUARTPS_FORMAT_6_BITS		3U /**< 6 data bits */
+
+#define XUARTPS_FORMAT_NO_PARITY	4U /**< No parity */
+#define XUARTPS_FORMAT_MARK_PARITY	3U /**< Mark parity */
+#define XUARTPS_FORMAT_SPACE_PARITY	2U /**< parity */
+#define XUARTPS_FORMAT_ODD_PARITY	1U /**< Odd parity */
+#define XUARTPS_FORMAT_EVEN_PARITY	0U /**< Even parity */
+
+#define XUARTPS_FORMAT_2_STOP_BIT	2U /**< 2 stop bits */
+#define XUARTPS_FORMAT_1_5_STOP_BIT	1U /**< 1.5 stop bits */
+#define XUARTPS_FORMAT_1_STOP_BIT	0U /**< 1 stop bit */
+/*@}*/
+
+/** @name Callback events
+ *
+ * These constants specify the handler events that an application can handle
+ * using its specific handler function. Note that these constants are not bit
+ * mask, so only one event can be passed to an application at a time.
+ *
+ * @{
+ */
+#define XUARTPS_EVENT_RECV_DATA			1U /**< Data receiving done */
+#define XUARTPS_EVENT_RECV_TOUT			2U /**< A receive timeout occurred */
+#define XUARTPS_EVENT_SENT_DATA			3U /**< Data transmission done */
+#define XUARTPS_EVENT_RECV_ERROR		4U /**< A receive error detected */
+#define XUARTPS_EVENT_MODEM				5U /**< Modem status changed */
+#define XUARTPS_EVENT_PARE_FRAME_BRKE	6U /**< A receive parity, frame, break
+											 *	error detected */
+#define XUARTPS_EVENT_RECV_ORERR		7U /**< A receive overrun error detected */
+/*@}*/
+
+
+/**************************** Type Definitions ******************************/
+
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct {
+	u16 DeviceId;	 /**< Unique ID  of device */
+	u32 BaseAddress; /**< Base address of device (IPIF) */
+	u32 InputClockHz;/**< Input clock frequency */
+	s32 ModemPinsConnected; /** Specifies whether modem pins are connected
+				 *  to MIO or FMIO */
+} XUartPs_Config;
+
+/* Keep track of state information about a data buffer in the interrupt mode. */
+typedef struct {
+	u8 *NextBytePtr;
+	u32 RequestedBytes;
+	u32 RemainingBytes;
+} XUartPsBuffer;
+
+/**
+ * Keep track of data format setting of a device.
+ */
+typedef struct {
+	u32 BaudRate;	/**< In bps, ie 1200 */
+	u32 DataBits;	/**< Number of data bits */
+	u32 Parity;		/**< Parity */
+	u8 StopBits;	/**< Number of stop bits */
+} XUartPsFormat;
+
+/******************************************************************************/
+/**
+ * This data type defines a handler that an application defines to communicate
+ * with interrupt system to retrieve state information about an application.
+ *
+ * @param	CallBackRef is a callback reference passed in by the upper layer
+ *		when setting the handler, and is passed back to the upper layer
+ *		when the handler is called. It is used to find the device driver
+ *		instance.
+ * @param	Event contains one of the event constants indicating events that
+ *		have occurred.
+ * @param	EventData contains the number of bytes sent or received at the
+ *		time of the call for send and receive events and contains the
+ *		modem status for modem events.
+ *
+ ******************************************************************************/
+typedef void (*XUartPs_Handler) (void *CallBackRef, u32 Event,
+				  u32 EventData);
+
+/**
+ * The XUartPs driver instance data structure. A pointer to an instance data
+ * structure is passed around by functions to refer to a specific driver
+ * instance.
+ */
+typedef struct {
+	XUartPs_Config Config;	/* Configuration data structure */
+	u32 InputClockHz;	/* Input clock frequency */
+	u32 IsReady;		/* Device is initialized and ready */
+	u32 BaudRate;		/* Current baud rate */
+
+	XUartPsBuffer SendBuffer;
+	XUartPsBuffer ReceiveBuffer;
+
+	XUartPs_Handler Handler;
+	void *CallBackRef;	/* Callback reference for event handler */
+	u32 Platform;
+	u8 is_rxbs_error;
+} XUartPs;
+
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/****************************************************************************/
+/**
+* Get the UART Channel Status Register.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u16 XUartPs_GetChannelStatus(XUartPs *InstancePtr)
+*
+******************************************************************************/
+#define XUartPs_GetChannelStatus(InstancePtr)   \
+	Xil_In32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_SR_OFFSET)
+
+/****************************************************************************/
+/**
+* Get the UART Mode Control Register.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u32 XUartPs_GetControl(XUartPs *InstancePtr)
+*
+******************************************************************************/
+#define XUartPs_GetModeControl(InstancePtr)  \
+	Xil_In32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_CR_OFFSET)
+
+/****************************************************************************/
+/**
+* Set the UART Mode Control Register.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*	void XUartPs_SetModeControl(XUartPs *InstancePtr, u16 RegisterValue)
+*
+******************************************************************************/
+#define XUartPs_SetModeControl(InstancePtr, RegisterValue) \
+   Xil_Out32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_CR_OFFSET, \
+			(u32)(RegisterValue))
+
+/****************************************************************************/
+/**
+* Enable the transmitter and receiver of the UART.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XUartPs_EnableUart(XUartPs *InstancePtr)
+*
+******************************************************************************/
+#define XUartPs_EnableUart(InstancePtr) \
+   Xil_Out32(((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET), \
+	  ((Xil_In32((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET) & \
+	  (u32)(~XUARTPS_CR_EN_DIS_MASK)) | ((u32)XUARTPS_CR_RX_EN | (u32)XUARTPS_CR_TX_EN)))
+
+/****************************************************************************/
+/**
+* Disable the transmitter and receiver of the UART.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XUartPs_DisableUart(XUartPs *InstancePtr)
+*
+******************************************************************************/
+#define XUartPs_DisableUart(InstancePtr) \
+   Xil_Out32(((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET), \
+	  (((Xil_In32((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET)) & \
+	  (u32)(~XUARTPS_CR_EN_DIS_MASK)) | ((u32)XUARTPS_CR_RX_DIS | (u32)XUARTPS_CR_TX_DIS)))
+
+/****************************************************************************/
+/**
+* Determine if the transmitter FIFO is empty.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return
+*		- TRUE if a byte can be sent
+*		- FALSE if the Transmitter Fifo is not empty
+*
+* @note		C-Style signature:
+*		u32 XUartPs_IsTransmitEmpty(XUartPs InstancePtr)
+*
+******************************************************************************/
+#define XUartPs_IsTransmitEmpty(InstancePtr)				\
+	((Xil_In32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_SR_OFFSET) & \
+	 (u32)XUARTPS_SR_TXEMPTY) == (u32)XUARTPS_SR_TXEMPTY)
+
+
+/************************** Function Prototypes *****************************/
+
+/* Static lookup function implemented in xuartps_sinit.c */
+XUartPs_Config *XUartPs_LookupConfig(u16 DeviceId);
+
+/* Interface functions implemented in xuartps.c */
+s32 XUartPs_CfgInitialize(XUartPs *InstancePtr,
+				  XUartPs_Config * Config, u32 EffectiveAddr);
+
+u32 XUartPs_Send(XUartPs *InstancePtr,u8 *BufferPtr,
+			   u32 NumBytes);
+
+u32 XUartPs_Recv(XUartPs *InstancePtr,u8 *BufferPtr,
+			   u32 NumBytes);
+
+s32 XUartPs_SetBaudRate(XUartPs *InstancePtr, u32 BaudRate);
+
+/* Options functions in xuartps_options.c */
+void XUartPs_SetOptions(XUartPs *InstancePtr, u16 Options);
+
+u16 XUartPs_GetOptions(XUartPs *InstancePtr);
+
+void XUartPs_SetFifoThreshold(XUartPs *InstancePtr, u8 TriggerLevel);
+
+u8 XUartPs_GetFifoThreshold(XUartPs *InstancePtr);
+
+u16 XUartPs_GetModemStatus(XUartPs *InstancePtr);
+
+u32 XUartPs_IsSending(XUartPs *InstancePtr);
+
+u8 XUartPs_GetOperMode(XUartPs *InstancePtr);
+
+void XUartPs_SetOperMode(XUartPs *InstancePtr, u8 OperationMode);
+
+u8 XUartPs_GetFlowDelay(XUartPs *InstancePtr);
+
+void XUartPs_SetFlowDelay(XUartPs *InstancePtr, u8 FlowDelayValue);
+
+u8 XUartPs_GetRecvTimeout(XUartPs *InstancePtr);
+
+void XUartPs_SetRecvTimeout(XUartPs *InstancePtr, u8 RecvTimeout);
+
+s32 XUartPs_SetDataFormat(XUartPs *InstancePtr, XUartPsFormat * FormatPtr);
+
+void XUartPs_GetDataFormat(XUartPs *InstancePtr, XUartPsFormat * FormatPtr);
+
+/* interrupt functions in xuartps_intr.c */
+u32 XUartPs_GetInterruptMask(XUartPs *InstancePtr);
+
+void XUartPs_SetInterruptMask(XUartPs *InstancePtr, u32 Mask);
+
+void XUartPs_InterruptHandler(XUartPs *InstancePtr);
+
+void XUartPs_SetHandler(XUartPs *InstancePtr, XUartPs_Handler FuncPtr,
+			 void *CallBackRef);
+
+/* self-test functions in xuartps_selftest.c */
+s32 XUartPs_SelfTest(XUartPs *InstancePtr);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_g.c
new file mode 100644
index 000000000..94aaf5b2e
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_g.c
@@ -0,0 +1,63 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xuartps.h"
+
+/*
+* The configuration table for devices
+*/
+
+XUartPs_Config XUartPs_ConfigTable[] =
+{
+	{
+		XPAR_PSU_UART_0_DEVICE_ID,
+		XPAR_PSU_UART_0_BASEADDR,
+		XPAR_PSU_UART_0_UART_CLK_FREQ_HZ,
+		XPAR_PSU_UART_0_HAS_MODEM
+	},
+	{
+		XPAR_PSU_UART_1_DEVICE_ID,
+		XPAR_PSU_UART_1_BASEADDR,
+		XPAR_PSU_UART_1_UART_CLK_FREQ_HZ,
+		XPAR_PSU_UART_1_HAS_MODEM
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_hw.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_hw.c
new file mode 100644
index 000000000..299dd35ae
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_hw.c
@@ -0,0 +1,180 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xuartps_hw.c
+* @addtogroup uartps_v3_1
+* @{
+*
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- ----------------------------------------------
+* 1.00	drg/jz 01/12/10 First Release
+* 1.05a hk     08/22/13 Added reset function
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+#include "xuartps_hw.h"
+
+/************************** Constant Definitions ****************************/
+
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+/****************************************************************************/
+/**
+*
+* This function sends one byte using the device. This function operates in
+* polled mode and blocks until the data has been put into the TX FIFO register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	Data contains the byte to be sent.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_SendByte(u32 BaseAddress, u8 Data)
+{
+	/* Wait until there is space in TX FIFO */
+	while (XUartPs_IsTransmitFull(BaseAddress)) {
+		;
+	}
+
+	/* Write the byte into the TX FIFO */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_FIFO_OFFSET, (u32)Data);
+}
+
+/****************************************************************************/
+/**
+*
+* This function receives a byte from the device. It operates in polled mode
+* and blocks until a byte has received.
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @return	The data byte received.
+*
+* @note		None.
+*
+*****************************************************************************/
+u8 XUartPs_RecvByte(u32 BaseAddress)
+{
+	u32 RecievedByte;
+	/* Wait until there is data */
+	while (!XUartPs_IsReceiveData(BaseAddress)) {
+		;
+	}
+	RecievedByte = XUartPs_ReadReg(BaseAddress, XUARTPS_FIFO_OFFSET);
+	/* Return the byte received */
+	return (u8)RecievedByte;
+}
+
+/****************************************************************************/
+/**
+*
+* This function resets UART
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @return	None
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_ResetHw(u32 BaseAddress)
+{
+
+	/* Disable interrupts */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_IDR_OFFSET, XUARTPS_IXR_MASK);
+
+	/* Disable receive and transmit */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_CR_OFFSET,
+				((u32)XUARTPS_CR_RX_DIS | (u32)XUARTPS_CR_TX_DIS));
+
+	/*
+	 * Software reset of receive and transmit
+	 * This clears the FIFO.
+	 */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_CR_OFFSET,
+				((u32)XUARTPS_CR_TXRST | (u32)XUARTPS_CR_RXRST));
+
+	/* Clear status flags - SW reset wont clear sticky flags. */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_ISR_OFFSET, XUARTPS_IXR_MASK);
+
+	/*
+	 * Mode register reset value : All zeroes
+	 * Normal mode, even parity, 1 stop bit
+	 */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_MR_OFFSET,
+				XUARTPS_MR_CHMODE_NORM);
+
+	/* Rx and TX trigger register reset values */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_RXWM_OFFSET,
+				XUARTPS_RXWM_RESET_VAL);
+	XUartPs_WriteReg(BaseAddress, XUARTPS_TXWM_OFFSET,
+				XUARTPS_TXWM_RESET_VAL);
+
+	/* Rx timeout disabled by default */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_RXTOUT_OFFSET,
+				XUARTPS_RXTOUT_DISABLE);
+
+	/* Baud rate generator and dividor reset values */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_BAUDGEN_OFFSET,
+				XUARTPS_BAUDGEN_RESET_VAL);
+	XUartPs_WriteReg(BaseAddress, XUARTPS_BAUDDIV_OFFSET,
+				XUARTPS_BAUDDIV_RESET_VAL);
+
+	/*
+	 * Control register reset value -
+	 * RX and TX are disable by default
+	 */
+	XUartPs_WriteReg(BaseAddress, XUARTPS_CR_OFFSET,
+				((u32)XUARTPS_CR_RX_DIS | (u32)XUARTPS_CR_TX_DIS |
+						(u32)XUARTPS_CR_STOPBRK));
+
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_hw.h
new file mode 100644
index 000000000..9f5f0b700
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_hw.h
@@ -0,0 +1,449 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xuartps_hw.h
+* @addtogroup uartps_v3_1
+* @{
+*
+* This header file contains the hardware interface of an XUartPs device.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- ----------------------------------------------
+* 1.00	drg/jz 01/12/10 First Release
+* 1.03a sg     09/04/12 Added defines for XUARTPS_IXR_TOVR,  XUARTPS_IXR_TNFUL
+*			and XUARTPS_IXR_TTRIG.
+*			Modified the names of these defines
+*			XUARTPS_MEDEMSR_DCDX to XUARTPS_MODEMSR_DDCD
+*			XUARTPS_MEDEMSR_RIX to XUARTPS_MODEMSR_TERI
+*			XUARTPS_MEDEMSR_DSRX to XUARTPS_MODEMSR_DDSR
+*			XUARTPS_MEDEMSR_CTSX to XUARTPS_MODEMSR_DCTS
+* 1.05a hk     08/22/13 Added prototype for uart reset and related
+*			constant definitions.
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn    04/10/15 Modified code for latest RTL changes.
+*
+* 

+*
+******************************************************************************/
+#ifndef XUARTPS_HW_H		/* prevent circular inclusions */
+#define XUARTPS_HW_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Register Map
+ *
+ * Register offsets for the UART.
+ * @{
+ */
+#define XUARTPS_CR_OFFSET		0x0000U  /**< Control Register [8:0] */
+#define XUARTPS_MR_OFFSET		0x0004U  /**< Mode Register [9:0] */
+#define XUARTPS_IER_OFFSET		0x0008U  /**< Interrupt Enable [12:0] */
+#define XUARTPS_IDR_OFFSET		0x000CU  /**< Interrupt Disable [12:0] */
+#define XUARTPS_IMR_OFFSET		0x0010U  /**< Interrupt Mask [12:0] */
+#define XUARTPS_ISR_OFFSET		0x0014U  /**< Interrupt Status [12:0]*/
+#define XUARTPS_BAUDGEN_OFFSET	0x0018U  /**< Baud Rate Generator [15:0] */
+#define XUARTPS_RXTOUT_OFFSET	0x001CU  /**< RX Timeout [7:0] */
+#define XUARTPS_RXWM_OFFSET		0x0020U  /**< RX FIFO Trigger Level [5:0] */
+#define XUARTPS_MODEMCR_OFFSET	0x0024U  /**< Modem Control [5:0] */
+#define XUARTPS_MODEMSR_OFFSET	0x0028U  /**< Modem Status [8:0] */
+#define XUARTPS_SR_OFFSET		0x002CU  /**< Channel Status [14:0] */
+#define XUARTPS_FIFO_OFFSET		0x0030U  /**< FIFO [7:0] */
+#define XUARTPS_BAUDDIV_OFFSET	0x0034U  /**< Baud Rate Divider [7:0] */
+#define XUARTPS_FLOWDEL_OFFSET	0x0038U  /**< Flow Delay [5:0] */
+#define XUARTPS_TXWM_OFFSET		0x0044U  /**< TX FIFO Trigger Level [5:0] */
+#define XUARTPS_RXBS_OFFSET		0x0048U  /**< RX FIFO Byte Status [11:0] */
+/* @} */
+
+/** @name Control Register
+ *
+ * The Control register (CR) controls the major functions of the device.
+ *
+ * Control Register Bit Definition
+ */
+
+#define XUARTPS_CR_STOPBRK	0x00000100U  /**< Stop transmission of break */
+#define XUARTPS_CR_STARTBRK	0x00000080U  /**< Set break */
+#define XUARTPS_CR_TORST	0x00000040U  /**< RX timeout counter restart */
+#define XUARTPS_CR_TX_DIS	0x00000020U  /**< TX disabled. */
+#define XUARTPS_CR_TX_EN	0x00000010U  /**< TX enabled */
+#define XUARTPS_CR_RX_DIS	0x00000008U  /**< RX disabled. */
+#define XUARTPS_CR_RX_EN	0x00000004U  /**< RX enabled */
+#define XUARTPS_CR_EN_DIS_MASK	0x0000003CU  /**< Enable/disable Mask */
+#define XUARTPS_CR_TXRST	0x00000002U  /**< TX logic reset */
+#define XUARTPS_CR_RXRST	0x00000001U  /**< RX logic reset */
+/* @}*/
+
+
+/** @name Mode Register
+ *
+ * The mode register (MR) defines the mode of transfer as well as the data
+ * format. If this register is modified during transmission or reception,
+ * data validity cannot be guaranteed.
+ *
+ * Mode Register Bit Definition
+ * @{
+ */
+#define XUARTPS_MR_CCLK				0x00000400U /**< Input clock selection */
+#define XUARTPS_MR_CHMODE_R_LOOP	0x00000300U /**< Remote loopback mode */
+#define XUARTPS_MR_CHMODE_L_LOOP	0x00000200U /**< Local loopback mode */
+#define XUARTPS_MR_CHMODE_ECHO		0x00000100U /**< Auto echo mode */
+#define XUARTPS_MR_CHMODE_NORM		0x00000000U /**< Normal mode */
+#define XUARTPS_MR_CHMODE_SHIFT				8U  /**< Mode shift */
+#define XUARTPS_MR_CHMODE_MASK		0x00000300U /**< Mode mask */
+#define XUARTPS_MR_STOPMODE_2_BIT	0x00000080U /**< 2 stop bits */
+#define XUARTPS_MR_STOPMODE_1_5_BIT	0x00000040U /**< 1.5 stop bits */
+#define XUARTPS_MR_STOPMODE_1_BIT	0x00000000U /**< 1 stop bit */
+#define XUARTPS_MR_STOPMODE_SHIFT			6U  /**< Stop bits shift */
+#define XUARTPS_MR_STOPMODE_MASK	0x000000A0U /**< Stop bits mask */
+#define XUARTPS_MR_PARITY_NONE		0x00000020U /**< No parity mode */
+#define XUARTPS_MR_PARITY_MARK		0x00000018U /**< Mark parity mode */
+#define XUARTPS_MR_PARITY_SPACE		0x00000010U /**< Space parity mode */
+#define XUARTPS_MR_PARITY_ODD		0x00000008U /**< Odd parity mode */
+#define XUARTPS_MR_PARITY_EVEN		0x00000000U /**< Even parity mode */
+#define XUARTPS_MR_PARITY_SHIFT				3U  /**< Parity setting shift */
+#define XUARTPS_MR_PARITY_MASK		0x00000038U /**< Parity mask */
+#define XUARTPS_MR_CHARLEN_6_BIT	0x00000006U /**< 6 bits data */
+#define XUARTPS_MR_CHARLEN_7_BIT	0x00000004U /**< 7 bits data */
+#define XUARTPS_MR_CHARLEN_8_BIT	0x00000000U /**< 8 bits data */
+#define XUARTPS_MR_CHARLEN_SHIFT			1U  /**< Data Length shift */
+#define XUARTPS_MR_CHARLEN_MASK		0x00000006U /**< Data length mask */
+#define XUARTPS_MR_CLKSEL			0x00000001U /**< Input clock selection */
+/* @} */
+
+
+/** @name Interrupt Registers
+ *
+ * Interrupt control logic uses the interrupt enable register (IER) and the
+ * interrupt disable register (IDR) to set the value of the bits in the
+ * interrupt mask register (IMR). The IMR determines whether to pass an
+ * interrupt to the interrupt status register (ISR).
+ * Writing a 1 to IER Enbables an interrupt, writing a 1 to IDR disables an
+ * interrupt. IMR and ISR are read only, and IER and IDR are write only.
+ * Reading either IER or IDR returns 0x00.
+ *
+ * All four registers have the same bit definitions.
+ *
+ * @{
+ */
+#define XUARTPS_IXR_RBRK	0x00002000U /**< Rx FIFO break detect interrupt */
+#define XUARTPS_IXR_TOVR	0x00001000U /**< Tx FIFO Overflow interrupt */
+#define XUARTPS_IXR_TNFUL	0x00000800U /**< Tx FIFO Nearly Full interrupt */
+#define XUARTPS_IXR_TTRIG	0x00000400U /**< Tx Trig interrupt */
+#define XUARTPS_IXR_DMS		0x00000200U /**< Modem status change interrupt */
+#define XUARTPS_IXR_TOUT	0x00000100U /**< Timeout error interrupt */
+#define XUARTPS_IXR_PARITY 	0x00000080U /**< Parity error interrupt */
+#define XUARTPS_IXR_FRAMING	0x00000040U /**< Framing error interrupt */
+#define XUARTPS_IXR_OVER	0x00000020U /**< Overrun error interrupt */
+#define XUARTPS_IXR_TXFULL 	0x00000010U /**< TX FIFO full interrupt. */
+#define XUARTPS_IXR_TXEMPTY	0x00000008U /**< TX FIFO empty interrupt. */
+#define XUARTPS_IXR_RXFULL 	0x00000004U /**< RX FIFO full interrupt. */
+#define XUARTPS_IXR_RXEMPTY	0x00000002U /**< RX FIFO empty interrupt. */
+#define XUARTPS_IXR_RXOVR  	0x00000001U /**< RX FIFO trigger interrupt. */
+#define XUARTPS_IXR_MASK	0x00003FFFU /**< Valid bit mask */
+/* @} */
+
+
+/** @name Baud Rate Generator Register
+ *
+ * The baud rate generator control register (BRGR) is a 16 bit register that
+ * controls the receiver bit sample clock and baud rate.
+ * Valid values are 1 - 65535.
+ *
+ * Bit Sample Rate = CCLK / BRGR, where the CCLK is selected by the MR_CCLK bit
+ * in the MR register.
+ * @{
+ */
+#define XUARTPS_BAUDGEN_DISABLE		0x00000000U /**< Disable clock */
+#define XUARTPS_BAUDGEN_MASK		0x0000FFFFU /**< Valid bits mask */
+#define XUARTPS_BAUDGEN_RESET_VAL	0x0000028BU /**< Reset value */
+
+/** @name Baud Divisor Rate register
+ *
+ * The baud rate divider register (BDIV) controls how much the bit sample
+ * rate is divided by. It sets the baud rate.
+ * Valid values are 0x04 to 0xFF. Writing a value less than 4 will be ignored.
+ *
+ * Baud rate = CCLK / ((BAUDDIV + 1) x BRGR), where the CCLK is selected by
+ * the MR_CCLK bit in the MR register.
+ * @{
+ */
+#define XUARTPS_BAUDDIV_MASK        0x000000FFU	/**< 8 bit baud divider mask */
+#define XUARTPS_BAUDDIV_RESET_VAL   0x0000000FU	/**< Reset value */
+/* @} */
+
+
+/** @name Receiver Timeout Register
+ *
+ * Use the receiver timeout register (RTR) to detect an idle condition on
+ * the receiver data line.
+ *
+ * @{
+ */
+#define XUARTPS_RXTOUT_DISABLE		0x00000000U  /**< Disable time out */
+#define XUARTPS_RXTOUT_MASK			0x000000FFU  /**< Valid bits mask */
+
+/** @name Receiver FIFO Trigger Level Register
+ *
+ * Use the Receiver FIFO Trigger Level Register (RTRIG) to set the value at
+ * which the RX FIFO triggers an interrupt event.
+ * @{
+ */
+
+#define XUARTPS_RXWM_DISABLE	0x00000000U  /**< Disable RX trigger interrupt */
+#define XUARTPS_RXWM_MASK		0x0000003FU  /**< Valid bits mask */
+#define XUARTPS_RXWM_RESET_VAL	0x00000020U  /**< Reset value */
+/* @} */
+
+/** @name Transmit FIFO Trigger Level Register
+ *
+ * Use the Transmit FIFO Trigger Level Register (TTRIG) to set the value at
+ * which the TX FIFO triggers an interrupt event.
+ * @{
+ */
+
+#define XUARTPS_TXWM_MASK		0x0000003FU  /**< Valid bits mask */
+#define XUARTPS_TXWM_RESET_VAL	0x00000020U  /**< Reset value */
+/* @} */
+
+/** @name Modem Control Register
+ *
+ * This register (MODEMCR) controls the interface with the modem or data set,
+ * or a peripheral device emulating a modem.
+ *
+ * @{
+ */
+#define XUARTPS_MODEMCR_FCM	0x00000010U  /**< Flow control mode */
+#define XUARTPS_MODEMCR_RTS	0x00000002U  /**< Request to send */
+#define XUARTPS_MODEMCR_DTR	0x00000001U  /**< Data terminal ready */
+/* @} */
+
+/** @name Modem Status Register
+ *
+ * This register (MODEMSR) indicates the current state of the control lines
+ * from a modem, or another peripheral device, to the CPU. In addition, four
+ * bits of the modem status register provide change information. These bits
+ * are set to a logic 1 whenever a control input from the modem changes state.
+ *
+ * Note: Whenever the DCTS, DDSR, TERI, or DDCD bit is set to logic 1, a modem
+ * status interrupt is generated and this is reflected in the modem status
+ * register.
+ *
+ * @{
+ */
+#define XUARTPS_MODEMSR_FCMS	0x00000100U  /**< Flow control mode (FCMS) */
+#define XUARTPS_MODEMSR_DCD		0x00000080U  /**< Complement of DCD input */
+#define XUARTPS_MODEMSR_RI		0x00000040U  /**< Complement of RI input */
+#define XUARTPS_MODEMSR_DSR		0x00000020U  /**< Complement of DSR input */
+#define XUARTPS_MODEMSR_CTS		0x00000010U  /**< Complement of CTS input */
+#define XUARTPS_MODEMSR_DDCD	0x00000008U  /**< Delta DCD indicator */
+#define XUARTPS_MODEMSR_TERI  0x00000004U  /**< Trailing Edge Ring Indicator */
+#define XUARTPS_MODEMSR_DDSR	0x00000002U  /**< Change of DSR */
+#define XUARTPS_MODEMSR_DCTS	0x00000001U  /**< Change of CTS */
+/* @} */
+
+/** @name Channel Status Register
+ *
+ * The channel status register (CSR) is provided to enable the control logic
+ * to monitor the status of bits in the channel interrupt status register,
+ * even if these are masked out by the interrupt mask register.
+ *
+ * @{
+ */
+#define XUARTPS_SR_TNFUL	0x00004000U /**< TX FIFO Nearly Full Status */
+#define XUARTPS_SR_TTRIG	0x00002000U /**< TX FIFO Trigger Status */
+#define XUARTPS_SR_FLOWDEL	0x00001000U /**< RX FIFO fill over flow delay */
+#define XUARTPS_SR_TACTIVE	0x00000800U /**< TX active */
+#define XUARTPS_SR_RACTIVE	0x00000400U /**< RX active */
+#define XUARTPS_SR_TXFULL	0x00000010U /**< TX FIFO full */
+#define XUARTPS_SR_TXEMPTY	0x00000008U /**< TX FIFO empty */
+#define XUARTPS_SR_RXFULL	0x00000004U /**< RX FIFO full */
+#define XUARTPS_SR_RXEMPTY	0x00000002U /**< RX FIFO empty */
+#define XUARTPS_SR_RXOVR	0x00000001U /**< RX FIFO fill over trigger */
+/* @} */
+
+/** @name Flow Delay Register
+ *
+ * Operation of the flow delay register (FLOWDEL) is very similar to the
+ * receive FIFO trigger register. An internal trigger signal activates when the
+ * FIFO is filled to the level set by this register. This trigger will not
+ * cause an interrupt, although it can be read through the channel status
+ * register. In hardware flow control mode, RTS is deactivated when the trigger
+ * becomes active. RTS only resets when the FIFO level is four less than the
+ * level of the flow delay trigger and the flow delay trigger is not activated.
+ * A value less than 4 disables the flow delay.
+ * @{
+ */
+#define XUARTPS_FLOWDEL_MASK	XUARTPS_RXWM_MASK	/**< Valid bit mask */
+/* @} */
+
+/** @name Receiver FIFO Byte Status Register
+ *
+ * The Receiver FIFO Status register is used to have a continuous
+ * monitoring of the raw unmasked byte status information. The register
+ * contains frame, parity and break status information for the top
+ * four bytes in the RX FIFO.
+ *
+ * Receiver FIFO Byte Status Register Bit Definition
+ * @{
+ */
+#define XUARTPS_RXBS_BYTE3_BRKE		0x00000800U /**< Byte3 Break Error */
+#define XUARTPS_RXBS_BYTE3_FRME		0x00000400U /**< Byte3 Frame Error */
+#define XUARTPS_RXBS_BYTE3_PARE		0x00000200U /**< Byte3 Parity Error */
+#define XUARTPS_RXBS_BYTE2_BRKE		0x00000100U /**< Byte2 Break Error */
+#define XUARTPS_RXBS_BYTE2_FRME		0x00000080U /**< Byte2 Frame Error */
+#define XUARTPS_RXBS_BYTE2_PARE		0x00000040U /**< Byte2 Parity Error */
+#define XUARTPS_RXBS_BYTE1_BRKE		0x00000020U /**< Byte1 Break Error */
+#define XUARTPS_RXBS_BYTE1_FRME		0x00000010U /**< Byte1 Frame Error */
+#define XUARTPS_RXBS_BYTE1_PARE		0x00000008U /**< Byte1 Parity Error */
+#define XUARTPS_RXBS_BYTE0_BRKE		0x00000004U /**< Byte0 Break Error */
+#define XUARTPS_RXBS_BYTE0_FRME		0x00000002U /**< Byte0 Frame Error */
+#define XUARTPS_RXBS_BYTE0_PARE		0x00000001U /**< Byte0 Parity Error */
+#define XUARTPS_RXBS_MASK		0x00000007U /**< 3 bit RX byte status mask */
+/* @} */
+
+
+/*
+ * Defines for backwards compatabilty, will be removed
+ * in the next version of the driver
+ */
+#define XUARTPS_MEDEMSR_DCDX  XUARTPS_MODEMSR_DDCD
+#define XUARTPS_MEDEMSR_RIX   XUARTPS_MODEMSR_TERI
+#define XUARTPS_MEDEMSR_DSRX  XUARTPS_MODEMSR_DDSR
+#define	XUARTPS_MEDEMSR_CTSX  XUARTPS_MODEMSR_DCTS
+
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+* Read a UART register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the base address of the
+*		device.
+*
+* @return	The value read from the register.
+*
+* @note		C-Style signature:
+*		u32 XUartPs_ReadReg(u32 BaseAddress, int RegOffset)
+*
+******************************************************************************/
+#define XUartPs_ReadReg(BaseAddress, RegOffset) \
+	Xil_In32((BaseAddress) + (u32)(RegOffset))
+
+/***************************************************************************/
+/**
+* Write a UART register.
+*
+* @param	BaseAddress contains the base address of the device.
+* @param	RegOffset contains the offset from the base address of the
+*		device.
+* @param	RegisterValue is the value to be written to the register.
+*
+* @return	None.
+*
+* @note		C-Style signature:
+*		void XUartPs_WriteReg(u32 BaseAddress, int RegOffset,
+*						   u16 RegisterValue)
+*
+******************************************************************************/
+#define XUartPs_WriteReg(BaseAddress, RegOffset, RegisterValue) \
+	Xil_Out32((BaseAddress) + (u32)(RegOffset), (u32)(RegisterValue))
+
+/****************************************************************************/
+/**
+* Determine if there is receive data in the receiver and/or FIFO.
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @return	TRUE if there is receive data, FALSE otherwise.
+*
+* @note		C-Style signature:
+*		u32 XUartPs_IsReceiveData(u32 BaseAddress)
+*
+******************************************************************************/
+#define XUartPs_IsReceiveData(BaseAddress)			 \
+	!((Xil_In32((BaseAddress) + XUARTPS_SR_OFFSET) & 	\
+	(u32)XUARTPS_SR_RXEMPTY) == (u32)XUARTPS_SR_RXEMPTY)
+
+/****************************************************************************/
+/**
+* Determine if a byte of data can be sent with the transmitter.
+*
+* @param	BaseAddress contains the base address of the device.
+*
+* @return	TRUE if the TX FIFO is full, FALSE if a byte can be put in the
+*		FIFO.
+*
+* @note		C-Style signature:
+*		u32 XUartPs_IsTransmitFull(u32 BaseAddress)
+*
+******************************************************************************/
+#define XUartPs_IsTransmitFull(BaseAddress)			 \
+	((Xil_In32((BaseAddress) + XUARTPS_SR_OFFSET) & 	\
+	 (u32)XUARTPS_SR_TXFULL) == (u32)XUARTPS_SR_TXFULL)
+
+/************************** Function Prototypes ******************************/
+
+void XUartPs_SendByte(u32 BaseAddress, u8 Data);
+
+u8 XUartPs_RecvByte(u32 BaseAddress);
+
+void XUartPs_ResetHw(u32 BaseAddress);
+
+/************************** Variable Definitions *****************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_intr.c
new file mode 100644
index 000000000..849cb48db
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_intr.c
@@ -0,0 +1,450 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xuartps_intr.c
+* @addtogroup uartps_v3_1
+* @{
+*
+* This file contains the functions for interrupt handling
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- -----------------------------------------------
+* 1.00  drg/jz 01/13/10 First Release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 3.1	kvn    04/10/15 Modified code for latest RTL changes.
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+
+#include "xuartps.h"
+
+/************************** Constant Definitions ****************************/
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Function Prototypes *****************************/
+
+static void ReceiveDataHandler(XUartPs *InstancePtr);
+static void SendDataHandler(XUartPs *InstancePtr, u32 IsrStatus);
+static void ReceiveErrorHandler(XUartPs *InstancePtr, u32 IsrStatus);
+static void ReceiveTimeoutHandler(XUartPs *InstancePtr);
+static void ModemHandler(XUartPs *InstancePtr);
+
+
+/* Internal function prototypes implemented in xuartps.c */
+extern u32 XUartPs_ReceiveBuffer(XUartPs *InstancePtr);
+extern u32 XUartPs_SendBuffer(XUartPs *InstancePtr);
+
+/************************** Variable Definitions ****************************/
+
+typedef void (*Handler)(XUartPs *InstancePtr);
+
+/****************************************************************************/
+/**
+*
+* This function gets the interrupt mask
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return
+*		The current interrupt mask. The mask indicates which interupts
+*		are enabled.
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XUartPs_GetInterruptMask(XUartPs *InstancePtr)
+{
+	/* Assert validates the input argument */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+
+	/* Read the Interrupt Mask register */
+	return (XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+			 XUARTPS_IMR_OFFSET));
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the interrupt mask.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+* @param	Mask contains the interrupts to be enabled or disabled.
+*		A '1' enables an interupt, and a '0' disables.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_SetInterruptMask(XUartPs *InstancePtr, u32 Mask)
+{
+	u32 TempMask = Mask;
+	/* Assert validates the input arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	TempMask &= (u32)XUARTPS_IXR_MASK;
+
+	/* Write the mask to the IER Register */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+		 XUARTPS_IER_OFFSET, TempMask);
+
+	/* Write the inverse of the Mask to the IDR register */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+		 XUARTPS_IDR_OFFSET, (~TempMask));
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the handler that will be called when an event (interrupt)
+* occurs that needs application's attention.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+* @param	FuncPtr is the pointer to the callback function.
+* @param	CallBackRef is the upper layer callback reference passed back
+*		when the callback function is invoked.
+*
+* @return	None.
+*
+* @note
+*
+* There is no assert on the CallBackRef since the driver doesn't know what it
+* is (nor should it)
+*
+*****************************************************************************/
+void XUartPs_SetHandler(XUartPs *InstancePtr, XUartPs_Handler FuncPtr,
+		 void *CallBackRef)
+{
+	/*
+	 * Asserts validate the input arguments
+	 * CallBackRef not checked, no way to know what is valid
+	 */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(FuncPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	InstancePtr->Handler = FuncPtr;
+	InstancePtr->CallBackRef = CallBackRef;
+}
+
+/****************************************************************************/
+/**
+*
+* This function is the interrupt handler for the driver.
+* It must be connected to an interrupt system by the application such that it
+* can be called when an interrupt occurs.
+*
+* @param	InstancePtr contains a pointer to the driver instance
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XUartPs_InterruptHandler(XUartPs *InstancePtr)
+{
+	u32 IsrStatus;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the interrupt ID register to determine which
+	 * interrupt is active
+	 */
+	IsrStatus = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XUARTPS_IMR_OFFSET);
+
+	IsrStatus &= XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XUARTPS_ISR_OFFSET);
+
+	/* Dispatch an appropriate handler. */
+	if((IsrStatus & ((u32)XUARTPS_IXR_RXOVR | (u32)XUARTPS_IXR_RXEMPTY |
+			(u32)XUARTPS_IXR_RXFULL)) != (u32)0) {
+		/* Received data interrupt */
+		ReceiveDataHandler(InstancePtr);
+	}
+
+	if((IsrStatus & ((u32)XUARTPS_IXR_TXEMPTY | (u32)XUARTPS_IXR_TXFULL))
+									 != (u32)0) {
+		/* Transmit data interrupt */
+		SendDataHandler(InstancePtr, IsrStatus);
+	}
+
+	/* XUARTPS_IXR_RBRK is applicable only for Zynq Ultrascale+ MP */
+	if ((IsrStatus & ((u32)XUARTPS_IXR_OVER | (u32)XUARTPS_IXR_FRAMING |
+			(u32)XUARTPS_IXR_PARITY | (u32)XUARTPS_IXR_RBRK)) != (u32)0) {
+		/* Received Error Status interrupt */
+		ReceiveErrorHandler(InstancePtr, IsrStatus);
+	}
+
+	if((IsrStatus & ((u32)XUARTPS_IXR_TOUT)) != (u32)0) {
+		/* Received Timeout interrupt */
+		ReceiveTimeoutHandler(InstancePtr);
+	}
+
+	if((IsrStatus & ((u32)XUARTPS_IXR_DMS)) != (u32)0) {
+		/* Modem status interrupt */
+		ModemHandler(InstancePtr);
+	}
+
+	/* Clear the interrupt status. */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_ISR_OFFSET,
+		IsrStatus);
+
+}
+
+/****************************************************************************/
+/*
+*
+* This function handles interrupts for receive errors which include
+* overrun errors, framing errors, parity errors, and the break interrupt.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void ReceiveErrorHandler(XUartPs *InstancePtr, u32 IsrStatus)
+{
+	u32 ByteStatusValue, EventData;
+	u32 Event;
+
+	InstancePtr->is_rxbs_error = 0;
+
+	if ((InstancePtr->Platform == XPLAT_ZYNQ_ULTRA_MP) &&
+		(IsrStatus & ((u32)XUARTPS_IXR_PARITY | (u32)XUARTPS_IXR_RBRK
+					| (u32)XUARTPS_IXR_FRAMING))) {
+		InstancePtr->is_rxbs_error = 1;
+	}
+	/*
+	 * If there are bytes still to be received in the specified buffer
+	 * go ahead and receive them. Removing bytes from the RX FIFO will
+	 * clear the interrupt.
+	 */
+
+	(void)XUartPs_ReceiveBuffer(InstancePtr);
+
+	if (!(InstancePtr->is_rxbs_error)) {
+		Event = XUARTPS_EVENT_RECV_ERROR;
+		EventData = InstancePtr->ReceiveBuffer.RequestedBytes -
+			InstancePtr->ReceiveBuffer.RemainingBytes;
+
+		/*
+		 * Call the application handler to indicate that there is a receive
+		 * error or a break interrupt, if the application cares about the
+		 * error it call a function to get the last errors.
+		 */
+		InstancePtr->Handler(InstancePtr->CallBackRef,
+					Event,
+					EventData);
+	}
+}
+
+/****************************************************************************/
+/**
+*
+* This function handles the receive timeout interrupt. This interrupt occurs
+* whenever a number of bytes have been present in the RX FIFO and the receive
+* data line has been idle for at lease 4 or more character times, (the timeout
+* is set using XUartPs_SetrecvTimeout() function).
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void ReceiveTimeoutHandler(XUartPs *InstancePtr)
+{
+	u32 Event;
+
+	/*
+	 * If there are bytes still to be received in the specified buffer
+	 * go ahead and receive them. Removing bytes from the RX FIFO will
+	 * clear the interrupt.
+	 */
+	if (InstancePtr->ReceiveBuffer.RemainingBytes != (u32)0) {
+		(void)XUartPs_ReceiveBuffer(InstancePtr);
+	}
+
+	/*
+	 * If there are no more bytes to receive then indicate that this is
+	 * not a receive timeout but the end of the buffer reached, a timeout
+	 * normally occurs if # of bytes is not divisible by FIFO threshold,
+	 * don't rely on previous test of remaining bytes since receive
+	 * function updates it
+	 */
+	if (InstancePtr->ReceiveBuffer.RemainingBytes != (u32)0) {
+		Event = XUARTPS_EVENT_RECV_TOUT;
+	} else {
+		Event = XUARTPS_EVENT_RECV_DATA;
+	}
+
+	/*
+	 * Call the application handler to indicate that there is a receive
+	 * timeout or data event
+	 */
+	InstancePtr->Handler(InstancePtr->CallBackRef, Event,
+				 InstancePtr->ReceiveBuffer.RequestedBytes -
+				 InstancePtr->ReceiveBuffer.RemainingBytes);
+
+}
+/****************************************************************************/
+/**
+*
+* This function handles the interrupt when data is in RX FIFO.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void ReceiveDataHandler(XUartPs *InstancePtr)
+{
+	/*
+	 * If there are bytes still to be received in the specified buffer
+	 * go ahead and receive them. Removing bytes from the RX FIFO will
+	 * clear the interrupt.
+	 */
+	 if (InstancePtr->ReceiveBuffer.RemainingBytes != (u32)0) {
+		(void)XUartPs_ReceiveBuffer(InstancePtr);
+	}
+
+	 /* If the last byte of a message was received then call the application
+	 * handler, this code should not use an else from the previous check of
+	 * the number of bytes to receive because the call to receive the buffer
+	 * updates the bytes ramained
+	 */
+	if (InstancePtr->ReceiveBuffer.RemainingBytes == (u32)0) {
+		InstancePtr->Handler(InstancePtr->CallBackRef,
+				XUARTPS_EVENT_RECV_DATA,
+				(InstancePtr->ReceiveBuffer.RequestedBytes -
+				InstancePtr->ReceiveBuffer.RemainingBytes));
+	}
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function handles the interrupt when data has been sent, the transmit
+* FIFO is empty (transmitter holding register).
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+* @param	IsrStatus is the register value for channel status register
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void SendDataHandler(XUartPs *InstancePtr, u32 IsrStatus)
+{
+
+	/*
+	 * If there are not bytes to be sent from the specified buffer then disable
+	 * the transmit interrupt so it will stop interrupting as it interrupts
+	 * any time the FIFO is empty
+	 */
+	if (InstancePtr->SendBuffer.RemainingBytes == (u32)0) {
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+				XUARTPS_IDR_OFFSET,
+				((u32)XUARTPS_IXR_TXEMPTY | (u32)XUARTPS_IXR_TXFULL));
+
+		/* Call the application handler to indicate the sending is done */
+		InstancePtr->Handler(InstancePtr->CallBackRef,
+					XUARTPS_EVENT_SENT_DATA,
+					InstancePtr->SendBuffer.RequestedBytes -
+					InstancePtr->SendBuffer.RemainingBytes);
+	}
+
+	/* If TX FIFO is empty, send more. */
+	else if((IsrStatus & ((u32)XUARTPS_IXR_TXEMPTY)) != (u32)0) {
+		(void)XUartPs_SendBuffer(InstancePtr);
+	}
+	else {
+		/* Else with dummy entry for MISRA-C Compliance.*/
+		;
+	}
+}
+
+/****************************************************************************/
+/**
+*
+* This function handles modem interrupts.  It does not do any processing
+* except to call the application handler to indicate a modem event.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+static void ModemHandler(XUartPs *InstancePtr)
+{
+	u32 MsrRegister;
+
+	/*
+	 * Read the modem status register so that the interrupt is acknowledged
+	 * and it can be passed to the callback handler with the event
+	 */
+	MsrRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+			  XUARTPS_MODEMSR_OFFSET);
+
+	/*
+	 * Call the application handler to indicate the modem status changed,
+	 * passing the modem status and the event data in the call
+	 */
+	InstancePtr->Handler(InstancePtr->CallBackRef,
+				  XUARTPS_EVENT_MODEM,
+				  MsrRegister);
+
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_options.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_options.c
new file mode 100644
index 000000000..7051d07ec
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_options.c
@@ -0,0 +1,761 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xuartps_options.c
+* @addtogroup uartps_v3_1
+* @{
+*
+* The implementation of the options functions for the XUartPs driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- -----------------------------------------------
+* 1.00  drg/jz 01/13/10 First Release
+* 1.00  sdm    09/27/11 Fixed a bug in XUartPs_SetFlowDelay where the input
+*			value was not being written to the register.
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+*
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+
+#include "xuartps.h"
+
+/************************** Constant Definitions ****************************/
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Variable Definitions ****************************/
+/*
+ * The following data type is a map from an option to the offset in the
+ * register to which it belongs as well as its bit mask in that register.
+ */
+typedef struct {
+	u16 Option;
+	u16 RegisterOffset;
+	u32 Mask;
+} Mapping;
+
+/*
+ * Create the table which contains options which are to be processed to get/set
+ * the options. These options are table driven to allow easy maintenance and
+ * expansion of the options.
+ */
+
+static Mapping OptionsTable[] = {
+	{XUARTPS_OPTION_SET_BREAK, XUARTPS_CR_OFFSET, XUARTPS_CR_STARTBRK},
+	{XUARTPS_OPTION_STOP_BREAK, XUARTPS_CR_OFFSET, XUARTPS_CR_STOPBRK},
+	{XUARTPS_OPTION_RESET_TMOUT, XUARTPS_CR_OFFSET, XUARTPS_CR_TORST},
+	{XUARTPS_OPTION_RESET_TX, XUARTPS_CR_OFFSET, XUARTPS_CR_TXRST},
+	{XUARTPS_OPTION_RESET_RX, XUARTPS_CR_OFFSET, XUARTPS_CR_RXRST},
+	{XUARTPS_OPTION_ASSERT_RTS, XUARTPS_MODEMCR_OFFSET,
+	 XUARTPS_MODEMCR_RTS},
+	{XUARTPS_OPTION_ASSERT_DTR, XUARTPS_MODEMCR_OFFSET,
+	 XUARTPS_MODEMCR_DTR},
+	{XUARTPS_OPTION_SET_FCM, XUARTPS_MODEMCR_OFFSET, XUARTPS_MODEMCR_FCM}
+};
+
+/* Create a constant for the number of entries in the table */
+
+#define XUARTPS_NUM_OPTIONS	  (sizeof(OptionsTable) / sizeof(Mapping))
+
+/************************** Function Prototypes *****************************/
+
+/****************************************************************************/
+/**
+*
+* Gets the options for the specified driver instance. The options are
+* implemented as bit masks such that multiple options may be enabled or
+* disabled simulataneously.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return
+*
+* The current options for the UART. The optionss are bit masks that are
+* contained in the file xuartps.h and named XUARTPS_OPTION_*.
+*
+* @note		None.
+*
+*****************************************************************************/
+u16 XUartPs_GetOptions(XUartPs *InstancePtr)
+{
+	u16 Options = 0U;
+	u32 Register;
+	u32 Index;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Loop thru the options table to map the physical options in the
+	 * registers of the UART to the logical options to be returned
+	 */
+	for (Index = 0U; Index < XUARTPS_NUM_OPTIONS; Index++) {
+		Register = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+						 OptionsTable[Index].
+						 RegisterOffset);
+
+		/*
+		 * If the bit in the register which correlates to the option
+		 * is set, then set the corresponding bit in the options,
+		 * ignoring any bits which are zero since the options variable
+		 * is initialized to zero
+		 */
+		if ((Register & OptionsTable[Index].Mask) != (u32)0) {
+			Options |= OptionsTable[Index].Option;
+		}
+	}
+
+	return Options;
+}
+
+/****************************************************************************/
+/**
+*
+* Sets the options for the specified driver instance. The options are
+* implemented as bit masks such that multiple options may be enabled or
+* disabled simultaneously.
+*
+* The GetOptions function may be called to retrieve the currently enabled
+* options. The result is ORed in the desired new settings to be enabled and
+* ANDed with the inverse to clear the settings to be disabled. The resulting
+* value is then used as the options for the SetOption function call.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	Options contains the options to be set which are bit masks
+*		contained in the file xuartps.h and named XUARTPS_OPTION_*.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_SetOptions(XUartPs *InstancePtr, u16 Options)
+{
+	u32 Index;
+	u32 Register;
+
+	/* Assert validates the input arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Loop thru the options table to map the logical options to the
+	 * physical options in the registers of the UART.
+	 */
+	for (Index = 0U; Index < XUARTPS_NUM_OPTIONS; Index++) {
+
+		/*
+		 * Read the register which contains option so that the register
+		 * can be changed without destoying any other bits of the
+		 * register.
+		 */
+		Register = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+						 OptionsTable[Index].
+						 RegisterOffset);
+
+		/*
+		 * If the option is set in the input, then set the corresponding
+		 * bit in the specified register, otherwise clear the bit in
+		 * the register.
+		 */
+		if ((Options & OptionsTable[Index].Option) != (u16)0) {
+			Register |= OptionsTable[Index].Mask;
+		}
+		else {
+			Register &= ~OptionsTable[Index].Mask;
+		}
+
+		/* Write the new value to the register to set the option */
+		XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+				   OptionsTable[Index].RegisterOffset,
+				   Register);
+	}
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the receive FIFO trigger level. The receive trigger
+* level indicates the number of bytes in the receive FIFO that cause a receive
+* data event (interrupt) to be generated.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return	The current receive FIFO trigger level. This is a value
+*		from 0-31.
+*
+* @note		None.
+*
+*****************************************************************************/
+u8 XUartPs_GetFifoThreshold(XUartPs *InstancePtr)
+{
+	u8 RtrigRegister;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the value of the FIFO control register so that the threshold
+	 * can be retrieved, this read takes special register processing
+	 */
+	RtrigRegister = (u8) XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+						   XUARTPS_RXWM_OFFSET);
+
+	/* Return only the trigger level from the register value */
+
+	RtrigRegister &= (u8)XUARTPS_RXWM_MASK;
+	return RtrigRegister;
+}
+
+/****************************************************************************/
+/**
+*
+* This functions sets the receive FIFO trigger level. The receive trigger
+* level specifies the number of bytes in the receive FIFO that cause a receive
+* data event (interrupt) to be generated.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	TriggerLevel contains the trigger level to set.
+*
+* @return	None
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_SetFifoThreshold(XUartPs *InstancePtr, u8 TriggerLevel)
+{
+	u32 RtrigRegister;
+
+	/* Assert validates the input arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(TriggerLevel <= (u8)XUARTPS_RXWM_MASK);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	RtrigRegister = ((u32)TriggerLevel) & (u32)XUARTPS_RXWM_MASK;
+
+	/*
+	 * Write the new value for the FIFO control register to it such that the
+	 * threshold is changed
+	 */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XUARTPS_RXWM_OFFSET, RtrigRegister);
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the modem status from the specified UART. The modem
+* status indicates any changes of the modem signals. This function allows
+* the modem status to be read in a polled mode. The modem status is updated
+* whenever it is read such that reading it twice may not yield the same
+* results.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return
+*
+* The modem status which are bit masks that are contained in the file
+* xuartps.h and named XUARTPS_MODEM_*.
+*
+* @note
+*
+* The bit masks used for the modem status are the exact bits of the modem
+* status register with no abstraction.
+*
+*****************************************************************************/
+u16 XUartPs_GetModemStatus(XUartPs *InstancePtr)
+{
+	u32 ModemStatusRegister;
+	u16 TmpRegister;
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Read the modem status register to return
+	 */
+	ModemStatusRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+						XUARTPS_MODEMSR_OFFSET);
+	TmpRegister = (u16)ModemStatusRegister;
+	return TmpRegister;
+}
+
+/****************************************************************************/
+/**
+*
+* This function determines if the specified UART is sending data.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return
+*		- TRUE if the UART is sending data
+*		- FALSE if UART is not sending data
+*
+* @note		None.
+*
+*****************************************************************************/
+u32 XUartPs_IsSending(XUartPs *InstancePtr)
+{
+	u32 ChanStatRegister;
+	u32 ChanTmpSRegister;
+	u32 ActiveResult;
+	u32 EmptyResult;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the channel status register to determine if the transmitter is
+	 * active
+	 */
+	ChanStatRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+						 XUARTPS_SR_OFFSET);
+
+	/*
+	 * If the transmitter is active, or the TX FIFO is not empty, then indicate
+	 * that the UART is still sending some data
+	 */
+	ActiveResult = ChanStatRegister & ((u32)XUARTPS_SR_TACTIVE);
+	EmptyResult = ChanStatRegister & ((u32)XUARTPS_SR_TXEMPTY);
+	ChanTmpSRegister = (((u32)XUARTPS_SR_TACTIVE) == ActiveResult) ||
+		(((u32)XUARTPS_SR_TXEMPTY) != EmptyResult);
+
+	return ChanTmpSRegister;
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the operational mode of the UART. The UART can operate
+* in one of four modes: Normal, Local Loopback, Remote Loopback, or automatic
+* echo.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return
+*
+* The operational mode is specified by constants defined in xuartps.h. The
+* constants are named XUARTPS_OPER_MODE_*
+*
+* @note		None.
+*
+*****************************************************************************/
+u8 XUartPs_GetOperMode(XUartPs *InstancePtr)
+{
+	u32 ModeRegister;
+	u8 OperMode;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Read the Mode register. */
+	ModeRegister =
+		XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XUARTPS_MR_OFFSET);
+
+	ModeRegister &= (u32)XUARTPS_MR_CHMODE_MASK;
+	/* Return the constant */
+	switch (ModeRegister) {
+	case XUARTPS_MR_CHMODE_NORM:
+		OperMode = XUARTPS_OPER_MODE_NORMAL;
+		break;
+	case XUARTPS_MR_CHMODE_ECHO:
+		OperMode = XUARTPS_OPER_MODE_AUTO_ECHO;
+		break;
+	case XUARTPS_MR_CHMODE_L_LOOP:
+		OperMode = XUARTPS_OPER_MODE_LOCAL_LOOP;
+		break;
+	case XUARTPS_MR_CHMODE_R_LOOP:
+		OperMode = XUARTPS_OPER_MODE_REMOTE_LOOP;
+		break;
+	default:
+		OperMode = (u8) ((ModeRegister & (u32)XUARTPS_MR_CHMODE_MASK) >>
+			XUARTPS_MR_CHMODE_SHIFT);
+		break;
+	}
+
+	return OperMode;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the operational mode of the UART. The UART can operate
+* in one of four modes: Normal, Local Loopback, Remote Loopback, or automatic
+* echo.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	OperationMode is the mode of the UART.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_SetOperMode(XUartPs *InstancePtr, u8 OperationMode)
+{
+	u32 ModeRegister;
+
+	/* Assert validates the input arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid(OperationMode <= XUARTPS_OPER_MODE_REMOTE_LOOP);
+
+	/* Read the Mode register. */
+	ModeRegister =
+		XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XUARTPS_MR_OFFSET);
+
+	/* Set the correct value by masking the bits, then ORing the const. */
+	ModeRegister &= (u32)(~XUARTPS_MR_CHMODE_MASK);
+
+	switch (OperationMode) {
+		case XUARTPS_OPER_MODE_NORMAL:
+			ModeRegister |= (u32)XUARTPS_MR_CHMODE_NORM;
+			break;
+		case XUARTPS_OPER_MODE_AUTO_ECHO:
+			ModeRegister |= (u32)XUARTPS_MR_CHMODE_ECHO;
+			break;
+		case XUARTPS_OPER_MODE_LOCAL_LOOP:
+			ModeRegister |= (u32)XUARTPS_MR_CHMODE_L_LOOP;
+			break;
+		case XUARTPS_OPER_MODE_REMOTE_LOOP:
+			ModeRegister |= (u32)XUARTPS_MR_CHMODE_R_LOOP;
+			break;
+		default:
+			/* Default case made for MISRA-C Compliance. */
+			break;
+	}
+
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_MR_OFFSET,
+			   ModeRegister);
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the Flow Delay.
+* 0 - 3: Flow delay inactive
+* 4 - 32: If Flow Control mode is enabled, UART_rtsN is deactivated when the
+* receive FIFO fills to this level.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return
+*
+* The Flow Delay is specified by constants defined in xuartps_hw.h. The
+* constants are named XUARTPS_FLOWDEL*
+*
+* @note		None.
+*
+*****************************************************************************/
+u8 XUartPs_GetFlowDelay(XUartPs *InstancePtr)
+{
+	u32 FdelTmpRegister;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Read the Mode register. */
+	FdelTmpRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+					 XUARTPS_FLOWDEL_OFFSET);
+
+	/* Return the contents of the flow delay register */
+	FdelTmpRegister = (u8)(FdelTmpRegister & (u32)XUARTPS_FLOWDEL_MASK);
+	return  FdelTmpRegister;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the Flow Delay.
+* 0 - 3: Flow delay inactive
+* 4 - 63: If Flow Control mode is enabled, UART_rtsN is deactivated when the
+* receive FIFO fills to this level.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	FlowDelayValue is the Setting for the flow delay.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_SetFlowDelay(XUartPs *InstancePtr, u8 FlowDelayValue)
+{
+	u32 FdelRegister;
+
+	/* Assert validates the input arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(FlowDelayValue > (u8)XUARTPS_FLOWDEL_MASK);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Set the correct value by shifting the input constant, then masking
+	 * the bits
+	 */
+	FdelRegister = ((u32)FlowDelayValue) & (u32)XUARTPS_FLOWDEL_MASK;
+
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XUARTPS_FLOWDEL_OFFSET, FdelRegister);
+
+}
+
+/****************************************************************************/
+/**
+*
+* This function gets the Receive Timeout of the UART.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+*
+* @return	The current setting for receive time out.
+*
+* @note		None.
+*
+*****************************************************************************/
+u8 XUartPs_GetRecvTimeout(XUartPs *InstancePtr)
+{
+	u32 RtoRegister;
+	u8 RtoRTmpRegister;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Read the Receive Timeout register. */
+	RtoRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+					XUARTPS_RXTOUT_OFFSET);
+
+	/* Return the contents of the mode register shifted appropriately */
+	RtoRTmpRegister = (u8)(RtoRegister & (u32)XUARTPS_RXTOUT_MASK);
+	return RtoRTmpRegister;
+}
+
+/****************************************************************************/
+/**
+*
+* This function sets the Receive Timeout of the UART.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	RecvTimeout setting allows the UART to detect an idle connection
+*		on the reciever data line.
+*		Timeout duration = RecvTimeout x 4 x Bit Period. 0 disables the
+*		timeout function.
+*
+* @return	None.
+*
+* @note		None.
+*
+*****************************************************************************/
+void XUartPs_SetRecvTimeout(XUartPs *InstancePtr, u8 RecvTimeout)
+{
+	u32 RtoRegister;
+
+	/* Assert validates the input arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Set the correct value by masking the bits */
+	RtoRegister = ((u32)RecvTimeout & (u32)XUARTPS_RXTOUT_MASK);
+
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress,
+			   XUARTPS_RXTOUT_OFFSET, RtoRegister);
+
+	/* Configure CR to restart the receiver timeout counter */
+	RtoRegister =
+		XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XUARTPS_CR_OFFSET);
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_CR_OFFSET,
+			   (RtoRegister | XUARTPS_CR_TORST));
+
+}
+/****************************************************************************/
+/**
+*
+* Sets the data format for the device. The data format includes the
+* baud rate, number of data bits, number of stop bits, and parity. It is the
+* caller's responsibility to ensure that the UART is not sending or receiving
+* data when this function is called.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	FormatPtr is a pointer to a format structure containing the data
+*		format to be set.
+*
+* @return
+*		- XST_SUCCESS if the data format was successfully set.
+*		- XST_UART_BAUD_ERROR indicates the baud rate could not be
+*		set because of the amount of error with the baud rate and
+*		the input clock frequency.
+*		- XST_INVALID_PARAM if one of the parameters was not valid.
+*
+* @note
+*
+* The data types in the format type, data bits and parity, are 32 bit fields
+* to prevent a compiler warning.
+* The asserts in this function will cause a warning if these fields are
+* bytes.
+* 


+*
+*****************************************************************************/
+s32 XUartPs_SetDataFormat(XUartPs *InstancePtr,
+			XUartPsFormat * FormatPtr)
+{
+	s32 Status;
+	u32 ModeRegister;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(FormatPtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Verify the inputs specified are valid */
+	if ((FormatPtr->DataBits > ((u32)XUARTPS_FORMAT_6_BITS)) ||
+		(FormatPtr->StopBits > ((u8)XUARTPS_FORMAT_2_STOP_BIT)) ||
+		(FormatPtr->Parity > ((u32)XUARTPS_FORMAT_NO_PARITY))) {
+		Status = XST_INVALID_PARAM;
+	} else {
+
+		/*
+		 * Try to set the baud rate and if it's not successful then don't
+		 * continue altering the data format, this is done first to avoid the
+		 * format from being altered when an error occurs
+		 */
+		Status = XUartPs_SetBaudRate(InstancePtr, FormatPtr->BaudRate);
+		if (Status != (s32)XST_SUCCESS) {
+			;
+		} else {
+
+			ModeRegister =
+				XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+						  XUARTPS_MR_OFFSET);
+
+			/*
+			 * Set the length of data (8,7,6) by first clearing out the bits
+			 * that control it in the register, then set the length in the register
+			 */
+			ModeRegister &= (u32)(~XUARTPS_MR_CHARLEN_MASK);
+			ModeRegister |= (FormatPtr->DataBits << XUARTPS_MR_CHARLEN_SHIFT);
+
+			/*
+			 * Set the number of stop bits in the mode register by first clearing
+			 * out the bits that control it in the register, then set the number
+			 * of stop bits in the register.
+			 */
+			ModeRegister &= (u32)(~XUARTPS_MR_STOPMODE_MASK);
+			ModeRegister |= (((u32)FormatPtr->StopBits) << XUARTPS_MR_STOPMODE_SHIFT);
+
+			/*
+			 * Set the parity by first clearing out the bits that control it in the
+			 * register, then set the bits in the register, the default is no parity
+			 * after clearing the register bits
+			 */
+			ModeRegister &= (u32)(~XUARTPS_MR_PARITY_MASK);
+			ModeRegister |= (FormatPtr->Parity << XUARTPS_MR_PARITY_SHIFT);
+
+			/* Update the mode register */
+			XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_MR_OFFSET,
+					   ModeRegister);
+
+			Status = XST_SUCCESS;
+		}
+	}
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* Gets the data format for the specified UART. The data format includes the
+* baud rate, number of data bits, number of stop bits, and parity.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance.
+* @param	FormatPtr is a pointer to a format structure that will contain
+*		the data format after this call completes.
+*
+* @return	None.
+*
+* @note		None.
+*
+*
+*****************************************************************************/
+void XUartPs_GetDataFormat(XUartPs *InstancePtr, XUartPsFormat * FormatPtr)
+{
+	u32 ModeRegister;
+
+
+	/* Assert validates the input arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(FormatPtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Get the baud rate from the instance, this is not retrieved from the
+	 * hardware because it is only kept as a divisor such that it is more
+	 * difficult to get back to the baud rate
+	 */
+	FormatPtr->BaudRate = InstancePtr->BaudRate;
+
+	ModeRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				  XUARTPS_MR_OFFSET);
+
+	/* Get the length of data (8,7,6,5) */
+	FormatPtr->DataBits =
+		((ModeRegister & (u32)XUARTPS_MR_CHARLEN_MASK) >>
+		XUARTPS_MR_CHARLEN_SHIFT);
+
+	/* Get the number of stop bits */
+	FormatPtr->StopBits =
+		(u8)((ModeRegister & (u32)XUARTPS_MR_STOPMODE_MASK) >>
+		XUARTPS_MR_STOPMODE_SHIFT);
+
+	/* Determine what parity is */
+	FormatPtr->Parity =
+		(u32)((ModeRegister & (u32)XUARTPS_MR_PARITY_MASK) >>
+		XUARTPS_MR_PARITY_SHIFT);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_selftest.c
new file mode 100644
index 000000000..a1a7dd366
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_selftest.c
@@ -0,0 +1,166 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xuartps_selftest.c
+* @addtogroup uartps_v3_1
+* @{
+*
+* This file contains the self-test functions for the XUartPs driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- -----------------------------------------------
+* 1.00	drg/jz 01/13/10 First Release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xstatus.h"
+#include "xuartps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#define XUARTPS_TOTAL_BYTES (u8)32
+
+/************************** Variable Definitions *****************************/
+
+static u8 TestString[XUARTPS_TOTAL_BYTES]="abcdefghABCDEFGH012345677654321";
+static u8 ReturnString[XUARTPS_TOTAL_BYTES];
+
+/************************** Function Prototypes ******************************/
+
+
+/****************************************************************************/
+/**
+*
+* This function runs a self-test on the driver and hardware device. This self
+* test performs a local loopback and verifies data can be sent and received.
+*
+* The time for this test is proportional to the baud rate that has been set
+* prior to calling this function.
+*
+* The mode and control registers are restored before return.
+*
+* @param	InstancePtr is a pointer to the XUartPs instance
+*
+* @return
+*		 - XST_SUCCESS if the test was successful
+*		- XST_UART_TEST_FAIL if the test failed looping back the data
+*
+* @note
+*
+* This function can hang if the hardware is not functioning properly.
+*
+******************************************************************************/
+s32 XUartPs_SelfTest(XUartPs *InstancePtr)
+{
+	s32 Status = XST_SUCCESS;
+	u32 IntrRegister;
+	u32 ModeRegister;
+	u8 Index;
+	u32 ReceiveDataResult;
+
+	/* Assert validates the input arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/* Disable all interrupts in the interrupt disable register */
+	IntrRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XUARTPS_IMR_OFFSET);
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_IDR_OFFSET,
+		XUARTPS_IXR_MASK);
+
+	/* Setup for local loopback */
+	ModeRegister = XUartPs_ReadReg(InstancePtr->Config.BaseAddress,
+				   XUARTPS_MR_OFFSET);
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_MR_OFFSET,
+			   ((ModeRegister & (u32)(~XUARTPS_MR_CHMODE_MASK)) |
+				(u32)XUARTPS_MR_CHMODE_L_LOOP));
+
+	/* Send a number of bytes and receive them, one at a time. */
+	for (Index = 0U; Index < XUARTPS_TOTAL_BYTES; Index++) {
+		/*
+		 * Send out the byte and if it was not sent then the failure
+		 * will be caught in the comparison at the end
+		 */
+		(void)XUartPs_Send(InstancePtr, &TestString[Index], 1U);
+
+		/*
+		 * Wait until the byte is received. This can hang if the HW
+		 * is broken. Watch for the FIFO empty flag to be false.
+		 */
+		ReceiveDataResult = Xil_In32((InstancePtr->Config.BaseAddress) + XUARTPS_SR_OFFSET) &
+				XUARTPS_SR_RXEMPTY;
+		while (ReceiveDataResult == XUARTPS_SR_RXEMPTY ) {
+			ReceiveDataResult = Xil_In32((InstancePtr->Config.BaseAddress) + XUARTPS_SR_OFFSET) &
+					XUARTPS_SR_RXEMPTY;
+		}
+
+		/* Receive the byte */
+		(void)XUartPs_Recv(InstancePtr, &ReturnString[Index], 1U);
+	}
+
+	/*
+	 * Compare the bytes received to the bytes sent to verify the exact data
+	 * was received
+	 */
+	for (Index = 0U; Index < XUARTPS_TOTAL_BYTES; Index++) {
+		if (TestString[Index] != ReturnString[Index]) {
+			Status = XST_UART_TEST_FAIL;
+		}
+	}
+
+	/*
+	 * Restore the registers which were altered to put into polling and
+	 * loopback modes so that this test is not destructive
+	 */
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_IER_OFFSET,
+			   IntrRegister);
+	XUartPs_WriteReg(InstancePtr->Config.BaseAddress, XUARTPS_MR_OFFSET,
+			   ModeRegister);
+
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_sinit.c
new file mode 100644
index 000000000..8dc87dae3
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/uartps_v3_1/src/xuartps_sinit.c
@@ -0,0 +1,99 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xuartps_sinit.c
+* @addtogroup uartps_v3_1
+* @{
+*
+* The implementation of the XUartPs driver's static initialzation
+* functionality.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date	Changes
+* ----- ------ -------- -----------------------------------------------
+* 1.00  drg/jz 01/13/10 First Release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+*****************************************************************************/
+
+/***************************** Include Files ********************************/
+
+#include "xstatus.h"
+#include "xparameters.h"
+#include "xuartps.h"
+
+/************************** Constant Definitions ****************************/
+
+/**************************** Type Definitions ******************************/
+
+/***************** Macros (Inline Functions) Definitions ********************/
+
+/************************** Variable Definitions ****************************/
+extern XUartPs_Config XUartPs_ConfigTable[XPAR_XUARTPS_NUM_INSTANCES];
+
+/************************** Function Prototypes *****************************/
+
+/****************************************************************************/
+/**
+*
+* Looks up the device configuration based on the unique device ID. The table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId contains the ID of the device
+*
+* @return	A pointer to the configuration structure or NULL if the
+*		specified device is not in the system.
+*
+* @note		None.
+*
+******************************************************************************/
+XUartPs_Config *XUartPs_LookupConfig(u16 DeviceId)
+{
+	XUartPs_Config *CfgPtr = NULL;
+
+	u32 Index;
+
+	for (Index = 0U; Index < (u32)XPAR_XUARTPS_NUM_INSTANCES; Index++) {
+		if (XUartPs_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XUartPs_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XUartPs_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/Makefile
new file mode 100644
index 000000000..8efa57289
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner wdtps_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling wdtps"
+
+wdtps_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: wdtps_includes
+
+wdtps_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps.c
new file mode 100644
index 000000000..fc5db32fe
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps.c
@@ -0,0 +1,486 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xwdtps.c
+* @addtogroup wdtps_v3_0
+* @{
+*
+* Contains the implementation of interface functions of the XWdtPs driver.
+* See xwdtps.h for a description of the driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------
+* 1.00a ecm/jz 01/15/10 First release
+* 1.02a  sg    07/15/12 Removed code/APIs related to  External Signal
+*			Length functionality for CR 658287
+*			Removed APIs XWdtPs_SetExternalSignalLength,
+*			XWdtPs_GetExternalSignalLength
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xwdtps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/****************************************************************************/
+/**
+*
+* Initialize a specific watchdog timer instance/driver. This function
+* must be called before other functions of the driver are called.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+* @param	ConfigPtr is the config structure.
+* @param	EffectiveAddress is the base address for the device. It could be
+*		a virtual address if address translation is supported in the
+*		system, otherwise it is the physical address.
+*
+* @return
+*		- XST_SUCCESS if initialization was successful.
+*		- XST_DEVICE_IS_STARTED if the device has already been started.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XWdtPs_CfgInitialize(XWdtPs *InstancePtr,
+			XWdtPs_Config *ConfigPtr, u32 EffectiveAddress)
+{
+	s32 Status;
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(ConfigPtr != NULL);
+
+	/*
+	 * If the device is started, disallow the initialize and return a
+	 * status indicating it is started. This allows the user to stop the
+	 * device and reinitialize, but prevents a user from inadvertently
+	 * initializing.
+	 */
+	if (InstancePtr->IsStarted == XIL_COMPONENT_IS_STARTED) {
+		Status = XST_DEVICE_IS_STARTED;
+	} else {
+
+		/*
+		 * Copy configuration into instance.
+		 */
+		InstancePtr->Config.DeviceId = ConfigPtr->DeviceId;
+
+		/*
+		 * Save the base address pointer such that the registers of the block
+		 * can be accessed and indicate it has not been started yet.
+		 */
+		InstancePtr->Config.BaseAddress = EffectiveAddress;
+		InstancePtr->IsStarted = 0U;
+
+		/*
+		 * Indicate the instance is ready to use, successfully initialized.
+		 */
+		InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
+
+		Status = XST_SUCCESS;
+	}
+	return Status;
+}
+
+/****************************************************************************/
+/**
+*
+* Start the watchdog timer of the device.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XWdtPs_Start(XWdtPs *InstancePtr)
+{
+	u32 Register;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the contents of the ZMR register.
+	 */
+	Register = XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+				 XWDTPS_ZMR_OFFSET);
+
+	/*
+	 * Enable the Timer field in the register and Set the access key so the
+	 * write takes place.
+	 */
+	Register |= XWDTPS_ZMR_WDEN_MASK;
+	Register |= XWDTPS_ZMR_ZKEY_VAL;
+
+	/*
+	 * Update the ZMR with the new value.
+	 */
+	XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_ZMR_OFFSET,
+			  Register);
+
+	/*
+	 * Indicate that the device is started.
+	 */
+	InstancePtr->IsStarted = XIL_COMPONENT_IS_STARTED;
+
+}
+
+/****************************************************************************/
+/**
+*
+* Disable the watchdog timer.
+*
+* It is the caller's responsibility to disconnect the interrupt handler
+* of the watchdog timer from the interrupt source, typically an interrupt
+* controller, and disable the interrupt in the interrupt controller.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XWdtPs_Stop(XWdtPs *InstancePtr)
+{
+	u32 Register;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the contents of the ZMR register.
+	 */
+	Register = XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+				 XWDTPS_ZMR_OFFSET);
+
+	/*
+	 * Disable the Timer field in the register and
+	 * Set the access key for the write to be done the register.
+	 */
+	Register &= (u32)(~XWDTPS_ZMR_WDEN_MASK);
+	Register |= XWDTPS_ZMR_ZKEY_VAL;
+
+	/*
+	 * Update the ZMR with the new value.
+	 */
+	XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_ZMR_OFFSET,
+			  Register);
+
+	InstancePtr->IsStarted = 0U;
+}
+
+
+/****************************************************************************/
+/**
+*
+* Enables the indicated signal/output.
+* Performs a read/modify/write cycle to update the value correctly.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+* @param	Signal is the desired signal/output.
+*		Valid Signal Values are XWDTPS_RESET_SIGNAL and
+*		XWDTPS_IRQ_SIGNAL.
+*		Only one of them can be specified at a time.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XWdtPs_EnableOutput(XWdtPs *InstancePtr, u8 Signal)
+{
+	u32 Register;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((Signal == XWDTPS_RESET_SIGNAL) ||
+			(Signal == XWDTPS_IRQ_SIGNAL));
+
+	/*
+	 * Read the contents of the ZMR register.
+	 */
+	Register = XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+				 XWDTPS_ZMR_OFFSET);
+
+	if (Signal == XWDTPS_RESET_SIGNAL) {
+		/*
+		 * Enable the field in the register.
+		 */
+		Register |= XWDTPS_ZMR_RSTEN_MASK;
+
+	} else if (Signal == XWDTPS_IRQ_SIGNAL) {
+		/*
+		 * Enable the field in the register.
+		 */
+		Register |= XWDTPS_ZMR_IRQEN_MASK;
+
+	} else {
+		/* Else was made for misra-c compliance */
+		;
+	}
+
+	/*
+	 * Set the access key so the write takes.
+	 */
+	Register |= XWDTPS_ZMR_ZKEY_VAL;
+
+	/*
+	 * Update the ZMR with the new value.
+	 */
+	XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_ZMR_OFFSET,
+			  Register);
+}
+
+/****************************************************************************/
+/**
+*
+* Disables the indicated signal/output.
+* Performs a read/modify/write cycle to update the value correctly.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+* @param	Signal is the desired signal/output.
+*		Valid Signal Values are XWDTPS_RESET_SIGNAL and
+*		XWDTPS_IRQ_SIGNAL
+*		Only one of them can be specified at a time.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XWdtPs_DisableOutput(XWdtPs *InstancePtr, u8 Signal)
+{
+	u32 Register;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((Signal == XWDTPS_RESET_SIGNAL) ||
+			(Signal == XWDTPS_IRQ_SIGNAL));
+
+	/*
+	 * Read the contents of the ZMR register.
+	 */
+	Register = XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+				 XWDTPS_ZMR_OFFSET);
+
+	if (Signal == XWDTPS_RESET_SIGNAL) {
+		/*
+		 * Disable the field in the register.
+		 */
+		Register &= (u32)(~XWDTPS_ZMR_RSTEN_MASK);
+
+	} else if (Signal == XWDTPS_IRQ_SIGNAL) {
+		/*
+		 * Disable the field in the register.
+		 */
+		Register &= (u32)(~XWDTPS_ZMR_IRQEN_MASK);
+
+	} else {
+		/* Else was made for misra-c compliance */
+		;
+	}
+
+	/*
+	 * Set the access key so the write takes place.
+	 */
+	Register |= XWDTPS_ZMR_ZKEY_VAL;
+
+	/*
+	 * Update the ZMR with the new value.
+	 */
+	XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_ZMR_OFFSET,
+			  Register);
+}
+
+/****************************************************************************/
+/**
+*
+* Returns the current control setting for the indicated signal/output.
+* The register referenced is the Counter Control Register (XWDTPS_CCR_OFFSET)
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+* @param	Control is the desired signal/output.
+*		Valid Control Values are XWDTPS_CLK_PRESCALE and
+*		XWDTPS_COUNTER_RESET. Only one of them can be specified at a
+*		time.
+*
+* @return	The contents of the requested control field in the Counter
+*		Control Register (XWDTPS_CCR_OFFSET).
+*		If the Control is XWDTPS_CLK_PRESCALE then use the
+*		defintions XWDTEPB_CCR_PSCALE_XXXX.
+*		If the Control is XWDTPS_COUNTER_RESET then the values are
+*		0x0 to 0xFFF. This is the Counter Restart value in the CCR
+*		register.
+*
+* @note		None.
+*
+******************************************************************************/
+u32 XWdtPs_GetControlValue(XWdtPs *InstancePtr, u8 Control)
+{
+	u32 Register;
+	u32 ReturnValue = 0U;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertNonvoid((Control == XWDTPS_CLK_PRESCALE) ||
+			(Control == XWDTPS_COUNTER_RESET));
+
+	/*
+	 * Read the contents of the CCR register.
+	 */
+	Register = XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+			 XWDTPS_CCR_OFFSET);
+
+	if (Control == XWDTPS_CLK_PRESCALE) {
+		/*
+		 * Mask off the field in the register.
+		 */
+		ReturnValue = Register & XWDTPS_CCR_CLKSEL_MASK;
+
+	} else if (Control == XWDTPS_COUNTER_RESET) {
+		/*
+		 * Mask off the field in the register.
+		 */
+		Register &= XWDTPS_CCR_CRV_MASK;
+
+		/*
+		 * Shift over to the right most positions.
+		 */
+		ReturnValue = Register >> XWDTPS_CCR_CRV_SHIFT;
+	} else {
+		/* Else was made for misra-c compliance */
+		;
+	}
+
+	return ReturnValue;
+}
+
+/****************************************************************************/
+/**
+*
+* Updates the current control setting for the indicated signal/output with
+* the provided value.
+*
+* Performs a read/modify/write cycle to update the value correctly.
+* The register referenced is the Counter Control Register (XWDTPS_CCR_OFFSET)
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+* @param	Control is the desired signal/output.
+*		Valid Control Values are XWDTPS_CLK_PRESCALE and
+*		XWDTPS_COUNTER_RESET. Only one of them can be specified at a
+*		time.
+* @param	Value is the desired control value.
+*		If the Control is XWDTPS_CLK_PRESCALE then use the
+*		defintions XWDTEPB_CCR_PSCALE_XXXX.
+*		If the Control is XWDTPS_COUNTER_RESET then the valid values
+*		are 0x0 to 0xFFF, this sets the counter restart value of the CCR
+*		register.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XWdtPs_SetControlValue(XWdtPs *InstancePtr, u8 Control, u32 Value)
+{
+	u32 Register;
+	u32 LocalValue = Value;
+
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+	Xil_AssertVoid((Control == XWDTPS_CLK_PRESCALE) ||
+			(Control == XWDTPS_COUNTER_RESET));
+
+	/*
+	 * Read the contents of the CCR register.
+	 */
+	Register = XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+				 XWDTPS_CCR_OFFSET);
+
+	if (Control == XWDTPS_CLK_PRESCALE) {
+		/*
+		 * Zero the field in the register.
+		 */
+		Register &= (u32)(~XWDTPS_CCR_CLKSEL_MASK);
+
+	} else if (Control == XWDTPS_COUNTER_RESET) {
+		/*
+		 * Zero the field in the register.
+		 */
+		Register &= (u32)(~XWDTPS_CCR_CRV_MASK);
+
+		/*
+		 * Shift Value over to the proper positions.
+		 */
+		LocalValue = LocalValue << XWDTPS_CCR_CRV_SHIFT;
+	} else{
+		/* This was made for misrac compliance. */
+		;
+	}
+
+	Register |= LocalValue;
+
+	/*
+	 * Set the access key so the write takes.
+	 */
+	Register |= XWDTPS_CCR_CKEY_VAL;
+
+	/*
+	 * Update the CCR with the new value.
+	 */
+	XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_CCR_OFFSET,
+			  Register);
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps.h
new file mode 100644
index 000000000..893d516e7
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps.h
@@ -0,0 +1,223 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xwdtps.h
+* @addtogroup wdtps_v3_0
+* @{
+* @details
+*
+* The Xilinx watchdog timer driver supports the Xilinx watchdog timer hardware.
+*
+* The Xilinx watchdog timer (WDT) driver supports the following features:
+*   - Both Interrupt driven and Polled mode
+*   - enabling and disabling the watchdog timer
+*   - restarting the watchdog.
+*   - initializing the most significant digit of the counter restart value.
+*   - multiple individually enabling/disabling outputs
+*
+* It is the responsibility of the application to provide an interrupt handler
+* for the watchdog timer and connect it to the interrupt system if interrupt
+* driven mode is desired.
+*
+* If interrupt is enabled, the watchdog timer device generates an interrupt
+* when the counter reaches zero.
+*
+* If the hardware interrupt signal is not connected/enabled, polled mode is the
+* only option (using IsWdtExpired) for the watchdog.
+*
+* The outputs from the WDT are individually enabled/disabled using
+* _EnableOutput()/_DisableOutput(). The clock divisor ratio and initial restart
+* value of the count is configurable using _SetControlValues().
+*
+* The reset condition of the hardware has the maximum initial count in the
+* Counter Reset Value (CRV) and the WDT is disabled with the reset enable
+* enabled and the reset length set to 32 clocks. i.e.
+* 
+*     register ZMR = 0x1C2
+*     register CCR = 0x3FC
+* 

+*
+* This driver is intended to be RTOS and processor independent. It works with
+* physical addresses only.  Any needs for dynamic memory management, threads
+* or thread mutual exclusion, virtual memory, or cache control must be
+* satisfied by the layer above this driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- -----------------------------------------------
+* 1.00a ecm/jz 01/15/10 First release
+* 1.01a asa    02/15/12 Added tcl file to generate xparameters
+* 1.02a  sg    07/15/12 Removed code/APIs related to  External Signal
+*						Length functionality for CR 658287
+*						Removed APIs XWdtPs_SetExternalSignalLength,
+*						XWdtPs_GetExternalSignalLength
+*						Modified the Self Test to use the Reset Length mask
+*						for CR 658287
+* 3.0	pkp	   12/09/14 Added support for Zynq Ultrascale Mp.Also
+*			modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+#ifndef XWDTPS_H		/* prevent circular inclusions */
+#define XWDTPS_H		/* by using protection macros */
+
+/***************************** Include Files *********************************/
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xstatus.h"
+#include "xwdtps_hw.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/************************** Constant Definitions *****************************/
+
+/*
+ * Choices for output selections for the device, used in
+ * XWdtPs_EnableOutput()/XWdtPs_DisableOutput() functions
+ */
+#define XWDTPS_RESET_SIGNAL	0x01U   /**< Reset signal request */
+#define XWDTPS_IRQ_SIGNAL	0x02U   /**< IRQ signal request */
+
+/*
+ * Control value setting flags, used in
+ * XWdtPs_SetControlValues()/XWdtPs_GetControlValues() functions
+ */
+#define XWDTPS_CLK_PRESCALE		0x01U   /**< Clock Prescale request */
+#define XWDTPS_COUNTER_RESET	0x02U   /**< Counter Reset request */
+
+/**************************** Type Definitions *******************************/
+
+/**
+ * This typedef contains configuration information for the device.
+ */
+typedef struct {
+	u16 DeviceId;		/**< Unique ID of device */
+	u32 BaseAddress;	/**< Base address of the device */
+} XWdtPs_Config;
+
+
+/**
+ * The XWdtPs driver instance data. The user is required to allocate a
+ * variable of this type for every watchdog/timer device in the system.
+ * A pointer to a variable of this type is then passed to the driver API
+ * functions.
+ */
+typedef struct {
+	XWdtPs_Config Config;   /**< Hardware Configuration */
+	u32 IsReady;		/**< Device is initialized and ready */
+	u32 IsStarted;		/**< Device watchdog timer is running */
+} XWdtPs;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+/****************************************************************************/
+/**
+*
+* Check if the watchdog timer has expired. This function is used for polled
+* mode and it is also used to check if the last reset was caused by the
+* watchdog timer.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+*
+* @return
+*		- TRUE if the watchdog has expired.
+*		- FALSE if the watchdog has not expired.
+*
+* @note		C-style signature:
+*		int XWdtPs_IsWdtExpired(XWdtPs *InstancePtr)
+*
+******************************************************************************/
+#define XWdtPs_IsWdtExpired(InstancePtr)				  \
+((XWdtPs_ReadReg((InstancePtr)->Config.BaseAddress, XWDTPS_SR_OFFSET) & \
+   XWDTPS_SR_WDZ_MASK) == XWDTPS_SR_WDZ_MASK)
+
+
+/****************************************************************************/
+/**
+*
+* Restart the watchdog timer. An application needs to call this function
+* periodically to keep the timer from asserting the enabled output.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+*
+* @return	None.
+*
+* @note		C-style signature:
+*		void XWdtPs_RestartWdt(XWdtPs *InstancePtr)
+*
+******************************************************************************/
+#define XWdtPs_RestartWdt(InstancePtr)					\
+	XWdtPs_WriteReg((InstancePtr)->Config.BaseAddress,		\
+		XWDTPS_RESTART_OFFSET, XWDTPS_RESTART_KEY_VAL)
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Lookup configuration in xwdtps_sinit.c.
+ */
+XWdtPs_Config *XWdtPs_LookupConfig(u16 DeviceId);
+
+/*
+ * Interface functions in xwdtps.c
+ */
+s32 XWdtPs_CfgInitialize(XWdtPs *InstancePtr,
+			XWdtPs_Config *ConfigPtr, u32 EffectiveAddress);
+
+void XWdtPs_Start(XWdtPs *InstancePtr);
+
+void XWdtPs_Stop(XWdtPs *InstancePtr);
+
+void XWdtPs_EnableOutput(XWdtPs *InstancePtr, u8 Signal);
+
+void XWdtPs_DisableOutput(XWdtPs *InstancePtr, u8 Signal);
+
+u32 XWdtPs_GetControlValue(XWdtPs *InstancePtr, u8 Control);
+
+void XWdtPs_SetControlValue(XWdtPs *InstancePtr, u8 Control, u32 Value);
+
+/*
+ * Self-test function in xwdttb_selftest.c.
+ */
+s32 XWdtPs_SelfTest(XWdtPs *InstancePtr);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of protection macro */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_g.c
new file mode 100644
index 000000000..5147be676
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_g.c
@@ -0,0 +1,59 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xwdtps.h"
+
+/*
+* The configuration table for devices
+*/
+
+XWdtPs_Config XWdtPs_ConfigTable[] =
+{
+	{
+		XPAR_PSU_WDT_0_DEVICE_ID,
+		XPAR_PSU_WDT_0_BASEADDR
+	},
+	{
+		XPAR_PSU_WDT_1_DEVICE_ID,
+		XPAR_PSU_WDT_1_BASEADDR
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_hw.h
new file mode 100644
index 000000000..4b5a3df31
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_hw.h
@@ -0,0 +1,193 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xwdtps_hw.h
+* @addtogroup wdtps_v3_0
+* @{
+*
+* This file contains the hardware interface to the System Watch Dog Timer (WDT).
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ---------------------------------------------
+* 1.00a ecm/jz 01/15/10 First release
+* 1.02a  sg    07/15/12 Removed defines related to  External Signal
+*			Length functionality for CR 658287
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+#ifndef XWDTPS_HW_H		/* prevent circular inclusions */
+#define XWDTPS_HW_H		/* by using protection macros */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xil_io.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Register Map
+ * Offsets of registers from the start of the device
+ * @{
+ */
+
+#define XWDTPS_ZMR_OFFSET	0x00000000U /**< Zero Mode Register */
+#define XWDTPS_CCR_OFFSET	0x00000004U /**< Counter Control Register */
+#define XWDTPS_RESTART_OFFSET	0x00000008U /**< Restart Register */
+#define XWDTPS_SR_OFFSET	0x0000000CU /**< Status Register */
+/* @} */
+
+
+/** @name Zero Mode Register
+ * This register controls how the time out is indicated and also contains
+ * the access code (0xABC) to allow writes to the register
+ * @{
+ */
+#define XWDTPS_ZMR_WDEN_MASK	0x00000001U /**< enable the WDT */
+#define XWDTPS_ZMR_RSTEN_MASK	0x00000002U /**< enable the reset output */
+#define XWDTPS_ZMR_IRQEN_MASK	0x00000004U /**< enable the IRQ output */
+
+#define XWDTPS_ZMR_RSTLN_MASK	0x00000070U /**< set length of reset pulse */
+#define XWDTPS_ZMR_RSTLN_SHIFT	4U	   /**< shift for reset pulse */
+
+#define XWDTPS_ZMR_IRQLN_MASK	0x00000180U /**< set length of interrupt pulse */
+#define XWDTPS_ZMR_IRQLN_SHIFT	7U	   /**< shift for interrupt pulse */
+
+#define XWDTPS_ZMR_ZKEY_MASK	0x00FFF000U /**< mask for writing access key */
+#define XWDTPS_ZMR_ZKEY_VAL		0x00ABC000U /**< access key, 0xABC << 12 */
+
+/* @} */
+
+/** @name  Counter Control register
+ * This register controls how fast the timer runs and the reset value
+ * and also contains the access code (0x248) to allow writes to the
+ * register
+ * @{
+ */
+
+#define XWDTPS_CCR_CLKSEL_MASK	0x00000003U /**< counter clock prescale */
+
+#define XWDTPS_CCR_CRV_MASK	0x00003FFCU /**< counter reset value */
+#define XWDTPS_CCR_CRV_SHIFT	2U	   /**< shift for writing value */
+
+#define XWDTPS_CCR_CKEY_MASK	0x03FFC000U /**< mask for writing access key */
+#define XWDTPS_CCR_CKEY_VAL	0x00920000U /**< access key, 0x248 << 14 */
+
+/* Bit patterns for Clock prescale divider values */
+
+#define XWDTPS_CCR_PSCALE_0008  0x00000000U /**< divide clock by 8 */
+#define XWDTPS_CCR_PSCALE_0064  0x00000001U /**< divide clock by 64 */
+#define XWDTPS_CCR_PSCALE_0512  0x00000002U /**< divide clock by 512 */
+#define XWDTPS_CCR_PSCALE_4096  0x00000003U /**< divide clock by 4096 */
+
+/* @} */
+
+/** @name  Restart register
+ * This register resets the timer preventing a timeout. Value is specific
+ * 0x1999
+ * @{
+ */
+
+#define XWDTPS_RESTART_KEY_VAL	0x00001999U /**< valid key */
+
+/*@}*/
+
+/** @name Status register
+ * This register indicates timer reached zero count.
+ * @{
+ */
+#define XWDTPS_SR_WDZ_MASK	0x00000001U /**< time out occurred */
+
+/*@}*/
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/****************************************************************************/
+/**
+*
+* Read the given register.
+*
+* @param	BaseAddress is the base address of the device
+* @param	RegOffset is the register offset to be read
+*
+* @return	The 32-bit value of the register
+*
+* @note		C-style signature:
+*		u32 XWdtPs_ReadReg(u32 BaseAddress, u32 RegOffset)
+*
+*****************************************************************************/
+#define XWdtPs_ReadReg(BaseAddress, RegOffset) \
+	Xil_In32((BaseAddress) + (u32)(RegOffset))
+
+/****************************************************************************/
+/**
+*
+* Write the given register.
+*
+* @param	BaseAddress is the base address of the device
+* @param	RegOffset is the register offset to be written
+* @param	Data is the 32-bit value to write to the register
+*
+* @return	None.
+*
+* @note		C-style signature:
+*		void XWdtPs_WriteReg(u32 BaseAddress, u32 RegOffset, u32 Data)
+*
+*****************************************************************************/
+#define XWdtPs_WriteReg(BaseAddress, RegOffset, Data) \
+	Xil_Out32((BaseAddress) + (u32)(RegOffset), (u32)(Data))
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_selftest.c
new file mode 100644
index 000000000..bcd5f356b
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_selftest.c
@@ -0,0 +1,173 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file xwdtps_selftest.c
+* @addtogroup wdtps_v3_0
+* @{
+*
+* Contains diagnostic self-test functions for the XWdtPs driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- --------------------------------------------
+* 1.00a ecm/jz 01/15/10 First release
+* 1.02a sg     08/01/12 Modified it use the Reset Length mask for the self
+*		        test for CR 658287
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xil_types.h"
+#include "xil_assert.h"
+#include "xwdtps.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/****************************************************************************/
+/**
+*
+* Run a self-test on the timebase. This test verifies that the register access
+* locking functions. This is tested by trying to alter a register without
+* setting the key value and verifying that the register contents did not
+* change.
+*
+* @param	InstancePtr is a pointer to the XWdtPs instance.
+*
+* @return
+*		- XST_SUCCESS if self-test was successful.
+*		- XST_FAILURE if self-test was not successful.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XWdtPs_SelfTest(XWdtPs *InstancePtr)
+{
+	u32 ZmrOrig;
+	u32 ZmrValue1;
+	u32 ZmrValue2;
+	s32 Status;
+
+	/*
+	 * Assert to ensure the inputs are valid and the instance has been
+	 * initialized.
+	 */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
+
+	/*
+	 * Read the ZMR register at start the test.
+	 */
+	ZmrOrig = XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+				 XWDTPS_ZMR_OFFSET);
+
+	/*
+	 * EX-OR in the length of the interrupt pulse,
+	 * do not set the key value.
+	 */
+	ZmrValue1 = ZmrOrig ^ (u32)XWDTPS_ZMR_RSTLN_MASK;
+
+
+	/*
+	 * Try to write to register w/o key value then read back.
+	 */
+	XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_ZMR_OFFSET,
+			  ZmrValue1);
+
+	ZmrValue2 =	XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+				 XWDTPS_ZMR_OFFSET);
+
+	if (ZmrValue1 == ZmrValue2) {
+		/*
+		 * If the values match, the hw failed the test,
+		 * return orig register value.
+		 */
+		XWdtPs_WriteReg(InstancePtr->Config.BaseAddress,
+				  XWDTPS_ZMR_OFFSET,
+				  (ZmrOrig | (u32)XWDTPS_ZMR_ZKEY_VAL));
+		Status = XST_FAILURE;
+	} else {
+
+
+		/*
+		 * Try to write to register with key value then read back.
+		 */
+		XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_ZMR_OFFSET,
+				  (ZmrValue1 | XWDTPS_ZMR_ZKEY_VAL));
+
+		ZmrValue2 =	XWdtPs_ReadReg(InstancePtr->Config.BaseAddress,
+					 XWDTPS_ZMR_OFFSET);
+
+		if (ZmrValue1 != ZmrValue2) {
+			/*
+			 * If the values do not match, the hw failed the test,
+			 * return orig register value.
+			 */
+			XWdtPs_WriteReg(InstancePtr->Config.BaseAddress,
+					  XWDTPS_ZMR_OFFSET,
+					  ZmrOrig | XWDTPS_ZMR_ZKEY_VAL);
+			Status = XST_FAILURE;
+
+		} else {
+
+			/*
+			 * The hardware locking feature is functional, return the original value
+			 * and return success.
+			 */
+			XWdtPs_WriteReg(InstancePtr->Config.BaseAddress, XWDTPS_ZMR_OFFSET,
+					  ZmrOrig | XWDTPS_ZMR_ZKEY_VAL);
+
+			Status = XST_SUCCESS;
+		}
+	}
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_sinit.c
new file mode 100644
index 000000000..f468c9903
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/wdtps_v3_0/src/xwdtps_sinit.c
@@ -0,0 +1,96 @@
+/******************************************************************************
+*
+* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xwdtps_sinit.c
+* @addtogroup wdtps_v3_0
+* @{
+*
+* This file contains method for static initialization (compile-time) of the
+* driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date     Changes
+* ----- ------ -------- ----------------------------------------------
+* 1.00a ecm/jz 01/15/10 First release
+* 3.00  kvn    02/13/15 Modified code for MISRA-C:2012 compliance.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xwdtps.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*************************** Variable Definitions ****************************/
+extern XWdtPs_Config XWdtPs_ConfigTable[XPAR_XWDTPS_NUM_INSTANCES];
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+* Lookup the device configuration based on the unique device ID. The table
+* contains the configuration info for each device in the system.
+*
+* @param	DeviceId is the unique device ID of the device being looked up.
+*
+* @return	A pointer to the configuration table entry corresponding to the
+*		given device ID, or NULL if no match is found.
+*
+* @note		None.
+*
+******************************************************************************/
+XWdtPs_Config *XWdtPs_LookupConfig(u16 DeviceId)
+{
+	XWdtPs_Config *CfgPtr = NULL;
+	u32 Index;
+
+	for (Index = 0U; Index < (u32)XPAR_XWDTPS_NUM_INSTANCES; Index++) {
+		if (XWdtPs_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XWdtPs_ConfigTable[Index];
+			break;
+		}
+	}
+	return (XWdtPs_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/Makefile b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/Makefile
new file mode 100644
index 000000000..9cd372526
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/Makefile
@@ -0,0 +1,40 @@
+COMPILER=
+ARCHIVER=
+CP=cp
+COMPILER_FLAGS=
+EXTRA_COMPILER_FLAGS=
+LIB=libxil.a
+
+CC_FLAGS = $(COMPILER_FLAGS)
+ECC_FLAGS = $(EXTRA_COMPILER_FLAGS)
+
+RELEASEDIR=../../../lib
+INCLUDEDIR=../../../include
+INCLUDES=-I./. -I${INCLUDEDIR}
+
+OUTS = *.o
+
+LIBSOURCES:=*.c
+INCLUDEFILES:=*.h
+
+OBJECTS =	$(addsuffix .o, $(basename $(wildcard *.c)))
+
+libs: banner zdma_libs clean
+
+%.o: %.c
+	${COMPILER} $(CC_FLAGS) $(ECC_FLAGS) $(INCLUDES) -o $@ $<
+
+banner:
+	echo "Compiling zdma"
+
+zdma_libs: ${OBJECTS}
+	$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OBJECTS}
+
+.PHONY: include
+include: zdma_includes
+
+zdma_includes:
+	${CP} ${INCLUDEFILES} ${INCLUDEDIR}
+
+clean:
+	rm -rf ${OBJECTS}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma.c
new file mode 100644
index 000000000..c203f585d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma.c
@@ -0,0 +1,1275 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xzdma.c
+* @addtogroup zdma_v1_0
+* @{
+*
+* This file contains the implementation of the interface functions for ZDMA
+* driver. Refer to the header file xzdma.h for more detailed information.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ------------------------------------------------------
+* 1.0   vns     2/27/15  First release
+*       vns    16/10/15  Corrected Destination descriptor addresss calculation
+*                        in XZDma_CreateBDList API
+* 1.1   vns    05/11/15  Modified XZDma_SetMode to return XST_FAILURE on
+*                        selecting DMA mode other than normal mode in
+*                        scatter gather mode data transfer and corrected
+*                        XZDma_SetChDataConfig API to set over fetch and
+*                        src issue parameters correctly.
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xzdma.h"
+
+/************************** Function Prototypes ******************************/
+
+static void StubCallBack(void *CallBackRef, u32 Mask);
+static void StubDoneCallBack(void *CallBackRef);
+static void XZDma_SimpleMode(XZDma *InstancePtr, XZDma_Transfer *Data);
+static void XZDma_ScatterGather(XZDma *InstancePtr, XZDma_Transfer *Data,
+								u32 Num);
+static void XZDma_LinearMode(XZDma *InstancePtr, XZDma_Transfer *Data,
+	XZDma_LiDscr *SrcDscrPtr,XZDma_LiDscr *DstDscrPtr, u8 IsLast);
+static void XZDma_ConfigLinear(XZDma_LiDscr *DscrPtr, u64 Addr, u32 Size,
+								u32 CtrlValue);
+static void XZDma_LinkedListMode(XZDma *InstancePtr, XZDma_Transfer *Data,
+	XZDma_LlDscr *SrcDscrPtr,XZDma_LlDscr *DstDscrPtr, u8 IsLast);
+static void XZDma_ConfigLinkedList(XZDma_LlDscr *DscrPtr, u64 Addr, u32 Size,
+					u32 CtrlValue, u64 NextDscrAddr);
+static void XZDma_Enable(XZDma *InstancePtr);
+static void XZDma_GetConfigurations(XZDma *InstancePtr);
+
+/************************** Function Definitions *****************************/
+
+/*****************************************************************************/
+/**
+*
+* This function initializes an ZDMA core. This function must be called
+* prior to using an ZDMA core. Initialization of an ZDMA includes setting
+* up the instance data and ensuring the hardware is in a quiescent state and
+* resets all the hardware configurations.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	CfgPtr is a reference to a structure containing information
+*		about a specific XZDma instance.
+* @param	EffectiveAddr is the device base address in the virtual memory
+*		address space. The caller is responsible for keeping the
+*		address mapping from EffectiveAddr to the device physical
+*		base address unchanged once this function is invoked.
+*		Unexpected errors may occur if the address mapping changes
+*		after this function is called. If address translation is not
+*		used, pass in the physical address instead.
+*
+* @return
+*		- XST_SUCCESS if initialization was successful.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XZDma_CfgInitialize(XZDma *InstancePtr, XZDma_Config *CfgPtr,
+			u32 EffectiveAddr)
+{
+
+	/* Verify arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(CfgPtr != NULL);
+	Xil_AssertNonvoid(EffectiveAddr != ((u32)0x00));
+
+	InstancePtr->Config.BaseAddress = CfgPtr->BaseAddress;
+	InstancePtr->Config.DeviceId = CfgPtr->DeviceId;
+	InstancePtr->Config.DmaType = CfgPtr->DmaType;
+
+	InstancePtr->Config.BaseAddress = EffectiveAddr;
+
+	InstancePtr->IsReady = (u32)(XIL_COMPONENT_IS_READY);
+
+	InstancePtr->IsSgDma = FALSE;
+	InstancePtr->Mode = XZDMA_NORMAL_MODE;
+	InstancePtr->IntrMask = 0x00U;
+	InstancePtr->ChannelState = XZDMA_IDLE;
+
+	/*
+	 * Set all handlers to stub values, let user configure this
+	 * data later
+	 */
+	InstancePtr->DoneHandler =
+				(XZDma_DoneHandler)((void *)StubDoneCallBack);
+	InstancePtr->ErrorHandler =
+				(XZDma_ErrorHandler)((void *)StubCallBack);
+
+	XZDma_Reset(InstancePtr);
+	XZDma_GetConfigurations(InstancePtr);
+
+	return (XST_SUCCESS);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the pointer type and mode in which ZDMA needs to transfer
+* the data.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	IsSgDma is a variable which specifies whether transfer has to
+*		to be done in scatter gather mode or simple mode.
+*		- TRUE  - Scatter gather pointer type
+*		- FALSE - Simple pointer type
+* @param	Mode is the type of the mode in which data has to be initiated
+*		- XZDMA_NORMAL_MODE   - Normal data transfer from source to
+*					destination (Valid for both Scatter
+*					gather and simple types)
+*		- XZDMA_WRONLY_MODE  - Write only mode (Valid only for Simple)
+*		- XZDMA_RDONLY_MODE  - Read only mode (Valid only for Simple)
+*
+* @return
+*		- XST_SUCCESS - If mode has been set successfully.
+*		- XST_FAILURE - If mode has not been set.
+*
+* @note		Mode cannot be changed while ZDMA is not in IDLE state.
+*
+******************************************************************************/
+s32 XZDma_SetMode(XZDma *InstancePtr, u8 IsSgDma, XZDma_Mode Mode)
+{
+	u32 Data;
+	s32 Status;
+
+	/* Verify arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid((IsSgDma == TRUE) || (IsSgDma == FALSE));
+	Xil_AssertNonvoid(Mode <= XZDMA_RDONLY_MODE);
+
+	if (InstancePtr->ChannelState != XZDMA_IDLE) {
+		Status = XST_FAILURE;
+		goto End;
+	}
+	else {
+		Data = XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+						XZDMA_CH_CTRL0_OFFSET);
+		/* Simple mode */
+		if (IsSgDma != TRUE) {
+			Data = (Data & (~XZDMA_CTRL0_POINT_TYPE_MASK));
+			if (Mode == XZDMA_NORMAL_MODE) {
+				Data &= (~XZDMA_CTRL0_MODE_MASK);
+			}
+			else if (Mode == XZDMA_WRONLY_MODE) {
+				Data |= XZDMA_CTRL0_WRONLY_MASK;
+			}
+			else {
+				Data |= XZDMA_CTRL0_RDONLY_MASK;
+			}
+			XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+						XZDMA_CH_CTRL0_OFFSET, Data);
+			InstancePtr->IsSgDma = FALSE;
+			InstancePtr->Mode = Mode;
+		}
+
+		else {
+			if (Mode != XZDMA_NORMAL_MODE) {
+				Status = XST_FAILURE;
+				goto End;
+			}
+			else {
+				Data |= (XZDMA_CTRL0_POINT_TYPE_MASK);
+				Data &= ~(XZDMA_CTRL0_MODE_MASK);
+				XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+						XZDMA_CH_CTRL0_OFFSET, Data);
+
+				InstancePtr->IsSgDma = TRUE;
+				InstancePtr->Mode = Mode;
+			}
+		}
+		Status = XST_SUCCESS;
+	}
+
+End:
+	return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the descriptor type and descriptor pointer's start address
+* of both source and destination based on the memory allocated by user and also
+* calculates no of descriptors(BDs) can be created in the allocated memory.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	TypeOfDscr is a variable which specifies descriptor type
+*		whether Linear or linked list type of descriptor.
+*		- XZDMA_LINEAR    - Linear type of descriptor.
+*		- XZDMA_LINKEDLIST- Linked list type of descriptor.
+* @param	Dscr_MemPtr is a pointer to the allocated memory for creating
+*		descriptors. It Should be aligned to 64 bytes.
+*
+* @param	NoOfBytes specifies the number of bytes allocated for
+*		descriptors
+*
+* @return	The Count of the descriptors can be created.
+*
+* @note		User should allocate the memory for descriptors which should
+*		be capable of how many transfers he wish to do in one start.
+*		For Linear mode each descriptor needs 128 bit memory so for
+*		one data transfer it requires 2*128 = 256 bits i.e. 32 bytes
+*		Similarly for Linked list mode for each descriptor it needs
+*		256 bit, so for one data transfer it require 2*256 = 512 bits
+*		i.e. 64 bytes.
+*
+******************************************************************************/
+u32 XZDma_CreateBDList(XZDma *InstancePtr, XZDma_DscrType TypeOfDscr,
+					UINTPTR Dscr_MemPtr, u32 NoOfBytes)
+{
+	u32 Size;
+
+	/* Verify arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid((TypeOfDscr == XZDMA_LINEAR) ||
+					(TypeOfDscr == XZDMA_LINKEDLIST));
+	Xil_AssertNonvoid(Dscr_MemPtr != 0x00);
+	Xil_AssertNonvoid(NoOfBytes != 0x00U);
+
+	InstancePtr->Descriptor.DscrType = TypeOfDscr;
+
+	if (TypeOfDscr == XZDMA_LINEAR) {
+		Size = sizeof(XZDma_LiDscr);
+	}
+	else {
+		Size = sizeof(XZDma_LlDscr);
+	}
+	InstancePtr->Descriptor.DscrCount =
+						(NoOfBytes >> 1) / Size;
+	InstancePtr->Descriptor.SrcDscrPtr = (void *)Dscr_MemPtr;
+	InstancePtr->Descriptor.DstDscrPtr =
+			(void *)Dscr_MemPtr + (Size * InstancePtr->Descriptor.DscrCount);
+
+	Xil_DCacheInvalidateRange((INTPTR)Dscr_MemPtr, NoOfBytes);
+
+	return (InstancePtr->Descriptor.DscrCount);
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the data attributes and control configurations of a
+* ZDMA core based on the inputs provided.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Configure is a pointer to the XZDma_ChDataConfig structure
+*		which has all the configuration fields.
+*		The fields of the structure are:
+*		- OverFetch - Allows over fetch or not
+*			- 0 - Not allowed to over-fetch on SRC
+*			- 1 - Allowed to over-fetch on SRC
+*		- SrcIssue  - Outstanding transaction on SRC
+*			- Range is 1 to 32
+*		- SrcBurstType - Burst Type for SRC AXI transaction
+*			- XZDMA_FIXED_BURST - Fixed burst
+*			- XZDMA_INCR_BURST  - Incremental burst
+*		- SrcBurstLen - AXI Length for Data Read.
+*			- Range of values is (1,2,4,8,16).
+*		- DstBurstType - Burst Type for SRC AXI transaction
+*			- XZDMA_FIXED_BURST - Fixed burst
+*			- XZDMA_INCR_BURST - Incremental burst
+*		- DstBurstLen     - AXI Length for Data write.
+*			- Range of values is (1,2,4,8,16).
+*		- SrcCache - AXI cache bits for Data read
+*		- SrcQos - Configurable QoS bits for AXI Data read
+*		- DstCache - AXI cache bits for Data write
+*		- DstQos - configurable QoS bits for AXI Data write
+*
+* @return
+* 		- XST_FAILURE  If ZDMA Core is not in Idle state and
+* 		- XST_SUCCESS If Configurations are made successfully
+*
+* @note
+* 		- These configurations will last till we modify or Reset
+*		  by XZDma_Reset(XZDma *InstancePtr).
+* 		- Configurations should be modified only when ZDMA channel
+* 		  is IDLE this can be confirmed by using
+*		  XZDma_ChannelState(XZDma *InstancePtr) API.
+*
+******************************************************************************/
+s32 XZDma_SetChDataConfig(XZDma *InstancePtr, XZDma_DataConfig *Configure)
+{
+	u32 Data;
+	s32 Status;
+
+	/* Verify arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(Configure != NULL);
+
+	if (InstancePtr->ChannelState != XZDMA_IDLE) {
+		Status = XST_FAILURE;
+	}
+	else {
+		InstancePtr->DataConfig.DstBurstType = Configure->DstBurstType;
+		InstancePtr->DataConfig.DstBurstLen = Configure->DstBurstLen;
+		InstancePtr->DataConfig.SrcBurstType = Configure->SrcBurstType;
+		InstancePtr->DataConfig.SrcBurstLen = Configure->SrcBurstLen;
+		InstancePtr->DataConfig.OverFetch = Configure->OverFetch;
+		InstancePtr->DataConfig.SrcIssue = Configure->SrcIssue;
+		InstancePtr->DataConfig.SrcCache = Configure->SrcCache;
+		InstancePtr->DataConfig.SrcQos = Configure->SrcQos;
+		InstancePtr->DataConfig.DstCache = Configure->DstCache;
+		InstancePtr->DataConfig.DstQos = Configure->DstQos;
+
+		/* Setting over fetch */
+		Data = XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_CTRL0_OFFSET) & (~XZDMA_CTRL0_OVR_FETCH_MASK);
+
+		Data |= (((u32)(Configure->OverFetch) <<
+				XZDMA_CTRL0_OVR_FETCH_SHIFT) &
+					XZDMA_CTRL0_OVR_FETCH_MASK);
+
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+					XZDMA_CH_CTRL0_OFFSET, Data);
+
+		/* Setting source issue */
+		Data = XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+						XZDMA_CH_CTRL1_OFFSET) & (~XZDMA_CTRL1_SRC_ISSUE_MASK);
+		Data |= (u32)(Configure->SrcIssue & XZDMA_CTRL1_SRC_ISSUE_MASK);
+
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+						XZDMA_CH_CTRL1_OFFSET, Data);
+
+		/* Setting Burst length and burst type */
+		Data = XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+						XZDMA_CH_DATA_ATTR_OFFSET);
+		Data = (Data & (~(XZDMA_DATA_ATTR_ARBURST_MASK |
+				 XZDMA_DATA_ATTR_ARLEN_MASK |
+				 XZDMA_DATA_ATTR_AWBURST_MASK |
+				 XZDMA_DATA_ATTR_AWLEN_MASK |
+				 XZDMA_DATA_ATTR_ARCACHE_MASK |
+				 XZDMA_DATA_ATTR_AWCACHE_MASK |
+				 XZDMA_DATA_ATTR_AWQOS_MASK |
+				 XZDMA_DATA_ATTR_ARQOS_MASK)));
+
+		Data |= ((((u32)(Configure->SrcBurstType) <<
+				XZDMA_DATA_ATTR_ARBURST_SHIFT) &
+				XZDMA_DATA_ATTR_ARBURST_MASK) |
+				(((u32)(Configure->SrcCache) <<
+				XZDMA_DATA_ATTR_ARCACHE_SHIFT) &
+				XZDMA_DATA_ATTR_ARCACHE_MASK) |
+				(((u32)(Configure->SrcQos) <<
+				XZDMA_DATA_ATTR_ARQOS_SHIFT) &
+				XZDMA_DATA_ATTR_ARQOS_MASK) |
+			(((u32)(Configure->SrcBurstLen) <<
+				XZDMA_DATA_ATTR_ARLEN_SHIFT) &
+				XZDMA_DATA_ATTR_ARLEN_MASK) |
+			(((u32)(Configure->DstBurstType) <<
+				XZDMA_DATA_ATTR_AWBURST_SHIFT) &
+				XZDMA_DATA_ATTR_AWBURST_MASK) |
+			(((u32)(Configure->DstCache) <<
+				XZDMA_DATA_ATTR_AWCACHE_SHIFT) &
+				XZDMA_DATA_ATTR_AWCACHE_MASK) |
+			(((u32)(Configure->DstQos) <<
+				XZDMA_DATA_ATTR_AWQOS_SHIFT) &
+				XZDMA_DATA_ATTR_AWQOS_MASK) |
+			(((u32)(Configure->DstBurstLen)) &
+				XZDMA_DATA_ATTR_AWLEN_MASK));
+
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+					XZDMA_CH_DATA_ATTR_OFFSET, Data);
+		Status = XST_SUCCESS;
+	}
+
+	return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function gets the data attributes and control configurations of a
+* ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Configure is a pointer to the XZDma_ChDataConfig structure
+*		which has all the configuration fields.
+*		The fields of the structure are:
+*		- OverFetch - Allows over fetch or not
+*			- 0 - Not allowed to over-fetch on SRC
+*			- 1 - Allowed to over-fetch on SRC
+*		- SrcIssue  - Outstanding transaction on SRC
+*			- Range is 1 to 32
+*		- SrcBurstType - Burst Type for SRC AXI transaction
+*			- XZDMA_FIXED_BURST - Fixed burst
+*			- XZDMA_INCR_BURST  - Incremental burst
+*		- SrcBurstLen - AXI Length for Data Read.
+*			- Can be max of 16 to be compatible with AXI3
+*		- DstBurstType - Burst Type for SRC AXI transaction
+*			- XZDMA_FIXED_BURST - Fixed burst
+*			- XZDMA_INCR_BURST - Incremental burst
+*		- DstBurstLen     - AXI Length for Data write.
+*			- Can be max of 16 to be compatible with AXI3
+*		- SrcCache - AXI cache bits for Data read
+*		- SrcQos - Configurable QoS bits for AXI Data read
+*		- DstCache - AXI cache bits for Data write
+*		- DstQos - Configurable QoS bits for AXI Data write
+*
+* @return	None
+*
+* @note		None.
+*
+******************************************************************************/
+void XZDma_GetChDataConfig(XZDma *InstancePtr, XZDma_DataConfig *Configure)
+{
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Configure != NULL);
+
+	Configure->SrcBurstType = InstancePtr->DataConfig.SrcBurstType;
+	Configure->SrcCache = InstancePtr->DataConfig.SrcCache;
+	Configure->SrcQos = InstancePtr->DataConfig.SrcQos;
+	Configure->SrcBurstLen = InstancePtr->DataConfig.SrcBurstLen;
+
+	Configure->DstBurstType = InstancePtr->DataConfig.DstBurstType;
+	Configure->DstCache = InstancePtr->DataConfig.DstCache;
+	Configure->DstQos = InstancePtr->DataConfig.DstQos;
+	Configure->DstBurstLen = InstancePtr->DataConfig.DstBurstLen;
+
+	Configure->OverFetch = InstancePtr->DataConfig.OverFetch;
+	Configure->SrcIssue = InstancePtr->DataConfig.SrcIssue;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets the descriptor attributes based on the inputs provided
+* in the structure.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Configure is a pointer to the XZDma_ChDscrConfig structure
+*		which has all the configuration fields.
+*		The fields of the structure are:
+*		- AxCoherent - AXI transactions generated for the descriptor.
+*			- 0 - Non coherent
+*			- 1 - Coherent
+*		- AXCache    - AXI cache bit used for DSCR fetch
+*				(both on SRC and DST Side)
+*		- AXQos      - QoS bit used for DSCR fetch
+*				(both on SRC and DST Side)
+*
+* @return
+*		- XST_FAILURE  If ZDMA core is not in Idle state and
+* 		- XST_SUCCESS If Configurations are made successfully
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XZDma_SetChDscrConfig(XZDma *InstancePtr, XZDma_DscrConfig *Configure)
+{
+	u32 Data;
+	s32 Status;
+
+	/* Verify arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(Configure != NULL);
+
+	if (InstancePtr->ChannelState != XZDMA_IDLE) {
+		Status = XST_FAILURE;
+	}
+
+	else {
+		InstancePtr->DscrConfig.AXCache = Configure->AXCache;
+		InstancePtr->DscrConfig.AXQos = Configure->AXQos;
+		InstancePtr->DscrConfig.AxCoherent = Configure->AxCoherent;
+
+		Data = ((((u32)(Configure->AxCoherent) <<
+				XZDMA_DSCR_ATTR_AXCOHRNT_SHIFT) &
+				XZDMA_DSCR_ATTR_AXCOHRNT_MASK) |
+			(((u32)(Configure->AXCache) <<
+				XZDMA_DSCR_ATTR_AXCACHE_SHIFT) &
+				XZDMA_DSCR_ATTR_AXCACHE_MASK) |
+			(((u32)Configure->AXQos) &
+				XZDMA_DSCR_ATTR_AXQOS_MASK));
+
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_DSCR_ATTR_OFFSET, Data);
+
+		Status = XST_SUCCESS;
+	}
+
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This function gets the descriptor attributes of the channel.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Configure is a pointer to the XZDma_ChDscrConfig structure
+*		which has all the configuration fields.
+*		The fields of the structure are:
+*		- AxCoherent - AXI transactions generated for the descriptor.
+*			- 0 - Non coherent
+*			- 1 - Coherent
+*		- AXCache    - AXI cache bit used for DSCR fetch
+*				(both on SRC and DST Side)
+*		- AXQos      - QoS bit used for DSCR fetch
+*				(both on SRC and DST Side)
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+void XZDma_GetChDscrConfig(XZDma *InstancePtr, XZDma_DscrConfig *Configure)
+{
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Configure != NULL);
+
+	Configure->AXCache = InstancePtr->DscrConfig.AXCache;
+	Configure->AXQos = InstancePtr->DscrConfig.AXQos;
+	Configure->AxCoherent = InstancePtr->DscrConfig.AxCoherent;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function preloads the buffers which will be used in write only mode.
+* In write only mode the data in the provided buffer will be written in
+* destination address for specified size.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Buffer is a pointer to an array of 64/128 bit data.
+*		i.e. pointer to 32 bit array of size 2/4
+*		 - Array of Size 2 for ADMA
+*		 - Array of Size 4 for GDMA
+*
+* @return	None.
+*
+* @note		Valid only in simple mode.
+* 		Prior to call this function ZDMA instance should be set in
+* 		Write only mode by using
+*		XZDma_SetMode(XZDma *InstancePtr, u8 IsSgDma,
+*							XZDma_Mode Mode)
+*		To initiate data transfer after this API need to call
+*		XZDma_Start(XZDma *InstancePtr, XZDma_Transfer *Data, u32 Num)
+*		In which only destination fields has to be filled.
+*
+******************************************************************************/
+void XZDma_WOData(XZDma *InstancePtr, u32 *Buffer)
+{
+	u32 *LocBuf = Buffer;
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Buffer != NULL);
+
+	if (InstancePtr->Config.DmaType == (u8)0) {
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_WR_ONLY_WORD0_OFFSET, *LocBuf);
+		LocBuf++;
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_WR_ONLY_WORD1_OFFSET, *LocBuf);
+		LocBuf++;
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_WR_ONLY_WORD2_OFFSET, *LocBuf);
+		LocBuf++;
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_WR_ONLY_WORD3_OFFSET, *LocBuf);
+	}
+
+	else {
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_WR_ONLY_WORD0_OFFSET, *LocBuf);
+		LocBuf++;
+		XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_WR_ONLY_WORD1_OFFSET, *LocBuf);
+	}
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function resume the paused state of ZDMA core and starts the transfer
+* from where it has paused.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		Valid only for scatter gather mode.
+*
+******************************************************************************/
+void XZDma_Resume(XZDma *InstancePtr)
+{
+	u32 Value;
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->IsSgDma == TRUE);
+	Xil_AssertVoid(InstancePtr->ChannelState == XZDMA_PAUSE);
+
+	Value = XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_CTRL0_OFFSET) & (~XZDMA_CTRL0_CONT_ADDR_MASK);
+	Value |= XZDMA_CTRL0_CONT_MASK;
+	InstancePtr->ChannelState = XZDMA_BUSY;
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_CTRL0_OFFSET, Value);
+}
+
+/*****************************************************************************/
+/**
+*
+* This function resets the ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		This function resets all the configurations made previously.
+*		Disables all the interrupts and clears interrupt status.
+*
+*****************************************************************************/
+void XZDma_Reset(XZDma *InstancePtr)
+{
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(InstancePtr->ChannelState == XZDMA_IDLE);
+
+	/* Disable's the channel */
+	XZDma_DisableCh(InstancePtr);
+
+	/* Disables all interrupts */
+	XZDma_DisableIntr(InstancePtr, XZDMA_IXR_ALL_INTR_MASK);
+	XZDma_IntrClear(InstancePtr, XZDMA_IXR_ALL_INTR_MASK);
+	InstancePtr->IntrMask = 0x00U;
+
+	/* All configurations are being reset */
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress, XZDMA_CH_CTRL0_OFFSET,
+					XZDMA_CTRL0_RESET_VALUE);
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress, XZDMA_CH_CTRL1_OFFSET,
+					XZDMA_CTRL1_RESET_VALUE);
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_DATA_ATTR_OFFSET, XZDMA_DATA_ATTR_RESET_VALUE);
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_DSCR_ATTR_OFFSET, XZDMA_DSCR_ATTR_RESET_VALUE);
+
+	/* Clears total byte */
+	XZDma_TotalByteClear(InstancePtr);
+
+	/* Clears interrupt count of both source and destination channels */
+	(void)XZDma_GetSrcIntrCnt(InstancePtr);
+	(void)XZDma_GetDstIntrCnt(InstancePtr);
+
+	InstancePtr->ChannelState = XZDMA_IDLE;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function returns the state of ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	This function returns state of ZDMA core
+*		- XZDMA_IDLE - If ZDMA core is in idle state.
+*		- XZDMA_PAUSE - If ZDMA is in paused state.
+*		- XZDMA_BUSY - If ZDMA is in busy state.
+* @note		None.
+*		C-style signature:
+*		XZDmaState XZDma_ChannelState(XZDma *InstancePtr)
+*
+******************************************************************************/
+XZDmaState XZDma_ChannelState(XZDma *InstancePtr)
+{
+	XZDmaState Status;
+	u32 Value;
+
+	/* Verify arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+
+	Value = XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+			(XZDMA_CH_STS_OFFSET)) & (XZDMA_STS_ALL_MASK);
+
+	if ((Value == XZDMA_STS_DONE_MASK) ||
+			(Value == XZDMA_STS_DONE_ERR_MASK)) {
+		Status = XZDMA_IDLE;
+	}
+	else if (Value == XZDMA_STS_PAUSE_MASK) {
+		Status = XZDMA_PAUSE;
+	}
+	else {
+		Status = XZDMA_BUSY;
+	}
+
+	return Status;
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This function sets all the required fields for initiating data transfer. Data
+* transfer elements needs to be passed through structure pointer.
+* Data transfer can be done in any of the three modes (simple, Linear or Linked
+* List) based on the selected mode but before calling this API make sure that
+* ZDMA is in Idle state.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Data is a pointer of array to the XZDma_Transfer structure which
+*		has all the configuration fields for initiating data transfer.
+*		The fields of the structure are:
+*		- SrcAddr      - Source address
+*		- DstAddr     - Destination address
+*		- Size      - size of the data to be transferred in bytes
+*		- SrcCoherent  - AXI transactions generated to process the
+*				descriptor payload for source channel
+*			- 0 - Non coherent
+*			- 1 - Coherent
+*		- DstCoherent - AXI transactions generated to process the
+*				descriptor payload for destination channel
+*			- 0 - Non coherent
+*			- 1 - Coherent
+*		- Pause 	-  Valid only for scatter gather mode.
+*				Will pause after completion of this descriptor.
+* @param	Num specifies number of array elements of Data pointer.
+*		- For simple mode Num should be equal to 1
+*		- For Scatter gather mode (either linear or linked list) Num
+*		  can be any choice. (But based on which memory should be
+*		  allocated by Application) It should be less than the return
+*		  value of XZDma_CreateBDList.
+*
+* @return
+*		- XST_SUCCESS - if ZDMA initiated the transfer.
+*		- XST_FAILURE - if ZDMA has not initiated data transfer.
+*
+* @note		After Pause to resume the transfer need to use the following
+*		API
+*		- XZDma_Resume
+*		User should provide allocated memory and descriptor type in
+*		scatter gather mode through the following API before calling
+*		the start API.
+*		- XZDma_SetDescriptorType(XZDma *InstancePtr,
+*			XZDma_DscrType TypeOfDscr, UINTPTR Dscr_MemPtr,
+*							u32 NoOfBytes)
+*
+******************************************************************************/
+s32 XZDma_Start(XZDma *InstancePtr, XZDma_Transfer *Data, u32 Num)
+{
+	s32 Status;
+
+	/* Verify arguments */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(Data != NULL);
+	Xil_AssertNonvoid(Num != 0x00U);
+
+	if ((InstancePtr->ChannelState == XZDMA_BUSY) &&
+			(Num >= InstancePtr->Descriptor.DscrCount)) {
+		Status = XST_FAILURE;
+	}
+	else {
+		if (InstancePtr->IsSgDma != TRUE) {
+			XZDma_SimpleMode(InstancePtr, Data);
+			Status = XST_SUCCESS;
+		}
+		else {
+
+			XZDma_ScatterGather(InstancePtr, Data, Num);
+			Status = XST_SUCCESS;
+		}
+
+		XZDma_Enable(InstancePtr);
+	}
+
+	return Status;
+}
+
+/*****************************************************************************/
+/**
+*
+* This static function sets all the required fields for initiating data
+* transfer in simple mode.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Data is a pointer of array to the XZDma_Transfer structure
+*		which has all the configuration fields for initiating data
+*		transfer.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void XZDma_SimpleMode(XZDma *InstancePtr, XZDma_Transfer *Data)
+{
+
+	u32 Value;
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Data != NULL);
+
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+		XZDMA_CH_SRC_DSCR_WORD0_OFFSET,
+			(Data->SrcAddr & XZDMA_WORD0_LSB_MASK));
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+		XZDMA_CH_SRC_DSCR_WORD1_OFFSET,
+		(((u64)Data->SrcAddr >> XZDMA_WORD1_MSB_SHIFT) &
+		XZDMA_WORD1_MSB_MASK));
+
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+		XZDMA_CH_DST_DSCR_WORD0_OFFSET,
+		(Data->DstAddr & XZDMA_WORD0_LSB_MASK));
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+		XZDMA_CH_DST_DSCR_WORD1_OFFSET,
+		(((u64)Data->DstAddr >> XZDMA_WORD1_MSB_SHIFT) &
+		XZDMA_WORD1_MSB_MASK));
+
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+		XZDMA_CH_SRC_DSCR_WORD2_OFFSET,
+		(Data->Size & XZDMA_WORD2_SIZE_MASK));
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+		XZDMA_CH_DST_DSCR_WORD2_OFFSET,
+		(Data->Size & XZDMA_WORD2_SIZE_MASK));
+
+	Value = (u32)(Data->SrcCoherent & XZDMA_WORD3_COHRNT_MASK);
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+		XZDMA_CH_SRC_DSCR_WORD3_OFFSET, Value);
+
+	Value = (u32)(Data->DstCoherent & XZDMA_WORD3_COHRNT_MASK);
+	XZDma_WriteReg((InstancePtr->Config.BaseAddress),
+			XZDMA_CH_DST_DSCR_WORD3_OFFSET, Value);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This static function sets all the required fields for initiating data
+* transfer in scatter gather mode.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Data is a pointer of array to the XZDma_Transfer structure
+*		which has all the configuration fields for initiating data
+*		transfer.
+* @param	Num specifies number of array elements of Data pointer.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void XZDma_ScatterGather(XZDma *InstancePtr, XZDma_Transfer *Data,
+								u32 Num)
+{
+	u32 Count = 0x00U;
+	u8 Last;
+	XZDma_Transfer *LocalData = Data;
+	XZDma_LiDscr *LiSrcDscr =
+		(XZDma_LiDscr *)(void *)(InstancePtr->Descriptor.SrcDscrPtr);
+	XZDma_LiDscr *LiDstDscr =
+		(XZDma_LiDscr *)(void *)(InstancePtr->Descriptor.DstDscrPtr);
+	XZDma_LlDscr *LlSrcDscr =
+		(XZDma_LlDscr *)(void *)(InstancePtr->Descriptor.SrcDscrPtr);
+	XZDma_LlDscr *LlDstDscr =
+		(XZDma_LlDscr *)(void *)(InstancePtr->Descriptor.DstDscrPtr);
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Data != NULL);
+	Xil_AssertVoid(Num != 0x00U);
+
+	if (InstancePtr->Descriptor.DscrType == XZDMA_LINEAR) {
+		Last = FALSE;
+		do {
+			if (Count == (Num- 1)) {
+				Last = TRUE;
+			}
+			XZDma_LinearMode(InstancePtr, LocalData, LiSrcDscr,
+							LiDstDscr, Last);
+			Count++;
+			LiSrcDscr++;
+			LiDstDscr++;
+			LocalData++;
+		} while(Count < Num);
+	}
+	else {
+		Last = FALSE;
+		do {
+			if (Count == (Num - 1)) {
+				Last = TRUE;
+			}
+			XZDma_LinkedListMode(InstancePtr, LocalData, LlSrcDscr,
+							LlDstDscr, Last);
+			Count++;
+			LlDstDscr++;
+			LlSrcDscr++;
+			LocalData++;
+		} while(Count < Num);
+	}
+
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_SRC_START_LSB_OFFSET,
+		((UINTPTR)(InstancePtr->Descriptor.SrcDscrPtr) &
+					XZDMA_WORD0_LSB_MASK));
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_SRC_START_MSB_OFFSET,
+		(((u64)(UINTPTR)(InstancePtr->Descriptor.SrcDscrPtr) >>
+			XZDMA_WORD1_MSB_SHIFT) & XZDMA_WORD1_MSB_MASK));
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_DST_START_LSB_OFFSET,
+		((UINTPTR)(InstancePtr->Descriptor.DstDscrPtr) &
+					XZDMA_WORD0_LSB_MASK));
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_DST_START_MSB_OFFSET,
+		(((u64)(UINTPTR)(InstancePtr->Descriptor.DstDscrPtr) >>
+			XZDMA_WORD1_MSB_SHIFT) & XZDMA_WORD1_MSB_MASK));
+}
+
+/*****************************************************************************/
+/**
+*
+* This static function sets all the required fields for initiating data
+* transfer in Linear descriptor type.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Data is a pointer of array to the XZDma_Transfer structure which
+*		has all the configuration fields for initiating data transfer.
+* @param	SrcDscrPtr is descriptor pointer of source in which Data fields
+*		has to be filled.
+* @param	DstDscrPtr is descriptor pointer of destination in which Data
+*		fields has to be filled.
+* @param	IsLast specifies whether provided descriptor pointer is last
+*		one or not.
+*		- XZDMA_TRUE - If descriptor is last
+*		- XZDMA_FALSE - If descriptor is not last
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void XZDma_LinearMode(XZDma *InstancePtr, XZDma_Transfer *Data,
+	XZDma_LiDscr *SrcDscrPtr, XZDma_LiDscr *DstDscrPtr, u8 IsLast)
+{
+	u32 Value;
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Data != NULL);
+	Xil_AssertVoid(SrcDscrPtr != NULL);
+	Xil_AssertVoid(DstDscrPtr != NULL);
+	Xil_AssertVoid((IsLast == TRUE) || (IsLast == FALSE));
+
+	if (Data->Pause == TRUE) {
+		Value = XZDMA_WORD3_CMD_PAUSE_MASK;
+	}
+	else if (IsLast == TRUE) {
+		Value = XZDMA_WORD3_CMD_STOP_MASK;
+	}
+	else {
+		Value = XZDMA_WORD3_CMD_NXTVALID_MASK;
+	}
+	if (Data->SrcCoherent == TRUE) {
+		Value |= XZDMA_WORD3_COHRNT_MASK;
+	}
+
+	XZDma_ConfigLinear(SrcDscrPtr, (u64)Data->SrcAddr, Data->Size, Value);
+
+	Value = 0U;
+
+	if (Data->DstCoherent == TRUE) {
+		Value |= XZDMA_WORD3_COHRNT_MASK;
+	}
+
+	XZDma_ConfigLinear(DstDscrPtr, (u64)Data->DstAddr, Data->Size, Value);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This static function sets all the required fields for initiating data
+* transfer in Linear descriptor type.
+*
+* @param	DscrPtr is a pointer to source/destination descriptor.
+* @param	Addr is a 64 bit variable which denotes the address of data.
+* @param	Size specifies the amount of the data to be transferred.
+* @param	CtrlValue contains all the control fields of descriptor.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void XZDma_ConfigLinear(XZDma_LiDscr *DscrPtr, u64 Addr, u32 Size,
+								u32 CtrlValue)
+{
+	/* Verify arguments */
+	Xil_AssertVoid(DscrPtr != NULL);
+	Xil_AssertVoid(Addr != 0x00U);
+
+	DscrPtr->Address = Addr;
+	DscrPtr->Size = Size & XZDMA_WORD2_SIZE_MASK;
+	DscrPtr->Cntl = CtrlValue;
+
+	Xil_DCacheFlushRange((UINTPTR)DscrPtr, sizeof(XZDma_LlDscr));
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This static function sets all the required fields for initiating data
+* transfer in Linked list descriptor type.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Data is a pointer of array to the XZDma_Transfer structure which
+*		has all the configuration fields for initiating data transfer.
+* @param	SrcDscrPtr is descriptor pointer of source in which Data fields
+*		has to be filled.
+* @param	DstDscrPtr is descriptor pointer of destination in which Data
+*		fields has to be filled.
+* @param	IsLast specifies whether provided descriptor pointer is last
+*		one or not.
+*		- TRUE - If descriptor is last
+*		- FALSE - If descriptor is not last
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void XZDma_LinkedListMode(XZDma *InstancePtr, XZDma_Transfer *Data,
+	XZDma_LlDscr *SrcDscrPtr,XZDma_LlDscr *DstDscrPtr, u8 IsLast)
+{
+	u32 Value;
+	XZDma_LlDscr *NextSrc = SrcDscrPtr;
+	XZDma_LlDscr *NextDst = DstDscrPtr;
+	u64 NextSrcAdrs = 0x00U;
+	u64 NextDstAdrs = 0x00U;
+
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+	Xil_AssertVoid(Data != NULL);
+	Xil_AssertVoid(SrcDscrPtr != NULL);
+	Xil_AssertVoid(DstDscrPtr != NULL);
+	Xil_AssertVoid((IsLast == TRUE) || (IsLast == FALSE));
+
+	NextDst++;
+	NextSrc++;
+
+	if (Data->Pause == TRUE) {
+		Value = XZDMA_WORD3_CMD_PAUSE_MASK;
+		if (IsLast != TRUE) {
+			NextSrcAdrs = (u64)(UINTPTR)NextSrc;
+			NextDstAdrs = (u64)(UINTPTR)NextDst;
+		}
+	}
+	else if (IsLast == TRUE) {
+		Value = XZDMA_WORD3_CMD_STOP_MASK;
+	}
+	else {
+		Value = XZDMA_WORD3_CMD_NXTVALID_MASK;
+		NextSrcAdrs = (u64)(UINTPTR)NextSrc;
+		NextDstAdrs = (u64)(UINTPTR)NextDst;
+	}
+	if (Data->SrcCoherent == TRUE) {
+		Value |= XZDMA_WORD3_COHRNT_MASK;
+	}
+
+	XZDma_ConfigLinkedList(SrcDscrPtr, (u64)Data->SrcAddr,
+					Data->Size, Value, NextSrcAdrs);
+
+	Value = 0U;
+
+	if (Data->DstCoherent == TRUE) {
+		Value |= XZDMA_WORD3_COHRNT_MASK;
+	}
+
+	XZDma_ConfigLinkedList(DstDscrPtr, (u64)Data->DstAddr,
+					Data->Size, Value, NextDstAdrs);
+
+}
+
+/*****************************************************************************/
+/**
+*
+* This static function sets all the required fields for initiating data
+* transfer in Linked list descriptor type.
+*
+* @param	DscrPtr is a pointer to source/destination descriptor.
+* @param	Addr is a 64 bit variable which denotes the address of data.
+* @param	Size specifies the amount of the data to be transferred.
+* @param	CtrlValue contains all the control fields of descriptor.
+* @param	NextDscrAddr is the address of next descriptor.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void XZDma_ConfigLinkedList(XZDma_LlDscr *DscrPtr, u64 Addr, u32 Size,
+			u32 CtrlValue, u64 NextDscrAddr)
+{
+	/* Verify arguments */
+	Xil_AssertVoid(DscrPtr != NULL);
+	Xil_AssertVoid(Addr != 0x00U);
+
+	DscrPtr->Address = Addr;
+	DscrPtr->Size = Size & XZDMA_WORD2_SIZE_MASK;
+	DscrPtr->Cntl = CtrlValue;
+	DscrPtr->NextDscr = NextDscrAddr;
+	DscrPtr->Reserved = 0U;
+
+	Xil_DCacheFlushRange((UINTPTR)DscrPtr, sizeof(XZDma_LlDscr));
+}
+
+/*****************************************************************************/
+/**
+* This static function enable's all the interrupts which user intended to
+* enable and enables the ZDMA channel for initiating data transfer.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+
+static void XZDma_Enable(XZDma *InstancePtr)
+{
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress, XZDMA_CH_IEN_OFFSET,
+			(InstancePtr->IntrMask & XZDMA_IXR_ALL_INTR_MASK));
+	InstancePtr->ChannelState = XZDMA_BUSY;
+	XZDma_EnableCh(InstancePtr);
+
+}
+
+/*****************************************************************************/
+/**
+* This static function gets all the reset configurations of ZDMA.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void XZDma_GetConfigurations(XZDma *InstancePtr)
+{
+	/* Verify arguments */
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	InstancePtr->DataConfig.SrcIssue = (u8)XZDMA_CTRL1_SRC_ISSUE_MASK;
+	InstancePtr->DataConfig.SrcBurstType = XZDMA_INCR_BURST;
+	InstancePtr->DataConfig.SrcBurstLen = 0xFU;
+	InstancePtr->DataConfig.OverFetch = 1U;
+	InstancePtr->DataConfig.DstBurstType = XZDMA_INCR_BURST;
+	InstancePtr->DataConfig.DstBurstLen = 0xFU;
+	InstancePtr->DataConfig.SrcCache = 0x2U;
+	InstancePtr->DataConfig.DstCache = 0x2U;
+	InstancePtr->DataConfig.SrcQos = 0x0U;
+	InstancePtr->DataConfig.DstQos = 0x0U;
+
+	InstancePtr->DscrConfig.AXCache = 0U;
+	InstancePtr->DscrConfig.AXQos = 0U;
+	InstancePtr->DscrConfig.AxCoherent = 0U;
+}
+
+/*****************************************************************************/
+/**
+*
+* This routine is a stub for the asynchronous callbacks. The stub is here in
+* case the upper layer forgot to set the handlers. On initialization, All
+* handlers are set to this callback. It is considered an error for this
+* handler to be invoked.
+*
+* @param	CallBackRef is a callback reference passed in by the upper
+*		layer when setting the callback functions, and passed back to
+*		the upper layer when the callback is invoked.
+* @param	Mask is the type of the interrupts to enable. Use OR'ing of
+*		XZDMA_IXR_DMA_*_MASK constants defined in xzdma_hw.h to create
+*		this parameter value.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void StubCallBack(void *CallBackRef, u32 Mask)
+{
+	/* Verify arguments. */
+	Xil_AssertVoid(CallBackRef != NULL);
+	Xil_AssertVoid(Mask != (u32)0x00);
+	Xil_AssertVoidAlways();
+}
+
+/*****************************************************************************/
+/**
+*
+* This routine is a stub for the DMA done callback. The stub is here in
+* case the upper layer forgot to set the handlers. On initialization, Done
+* handler are set to this callback.
+*
+* @param	CallBackRef is a callback reference passed in by the upper
+*		layer when setting the callback functions, and passed back to
+*		the upper layer when the callback is invoked.
+*
+* @return	None.
+*
+* @note		None.
+*
+******************************************************************************/
+static void StubDoneCallBack(void *CallBackRef)
+{
+	/* Verify arguments. */
+	Xil_AssertVoid(CallBackRef != NULL);
+	Xil_AssertVoidAlways();
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma.h
new file mode 100644
index 000000000..1f268d43c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma.h
@@ -0,0 +1,681 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xzdma.h
+* @addtogroup zdma_v1_0
+* @{
+* @details
+*
+* ZDMA is a general purpose DMA designed to support memory to memory and memory
+* to IO buffer transfers. ALTO has two instance of general purpose ZDMA.
+* One is located in FPD (full power domain) which is GDMA and other is located
+* in LPD (low power domain) which is ADMA.
+*
+* GMDA & ADMA are configured each with 8 DMA channels and and each channel can
+* be programmed secure or non-secure.
+* Each channel is divided into two functional sides, Source (Read) and
+* Destination (Write). Each DMA channel can be independently programmed
+* in one of following DMA modes.
+*	- Simple DMA
+*		- Normal data transfer from source to destination.
+*		- Write Only mode.
+*		- Read Only mode.
+*	- Scatter Gather DMA
+*		- Only Normal mode it can't support other two modes.
+* In Scatter gather descriptor can be of 3 types
+*	- Linear descriptor.
+*	- Linked list descriptor
+*	- Hybrid descriptor (Combination of both Linear and Linked list)
+* Our driver will not support Hybrid type of descriptor.
+*
+* Initialization & Configuration
+*
+* The device driver enables higher layer software (e.g., an application) to
+* communicate to the ZDMA core.
+*
+* XZDma_CfgInitialize() API is used to initialize the ZDMA core.
+* The user needs to first call the XZDma_LookupConfig() API which returns
+* the Configuration structure pointer which is passed as a parameter to the
+* XZDma_CfgInitialize() API.
+*
+*  Interrupts 
+* The driver provides an interrupt handler XZDma_IntrHandler for handling
+* the interrupt from the ZDMA core. The users of this driver have to
+* register this handler with the interrupt system and provide the callback
+* functions by using XZDma_SetCallBack API. In this version Descriptor done
+* option is disabled.
+*
+*  Virtual Memory 
+*
+* This driver supports Virtual Memory. The RTOS is responsible for calculating
+* the correct device base address in Virtual Memory space.
+*
+*  Threads 
+*
+* This driver is not thread safe. Any needs for threads or thread mutual
+* exclusion must be satisfied by the layer above this driver.
+*
+*  Asserts 
+*
+* Asserts are used within all Xilinx drivers to enforce constraints on argument
+* values. Asserts can be turned off on a system-wide basis by defining, at
+* compile time, the NDEBUG identifier. By default, asserts are turned on and it
+* is recommended that users leave asserts on during development.
+*
+*  Building the driver 
+*
+* The XZDma driver is composed of several source files. This allows the user
+* to build and link only those parts of the driver that are necessary.
+*
+* This header file contains identifiers and register-level driver functions (or
+* macros), range macros, structure typedefs that can be used to access the
+* Xilinx ZDMA core instance.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ------------------------------------------------------
+* 1.0   vns     2/27/15  First release
+* 1.1   vns    15/02/16  Corrected Destination descriptor addresss calculation
+*                        in XZDma_CreateBDList API
+*                        Modified XZDma_SetMode to return XST_FAILURE on
+*                        selecting DMA mode other than normal mode in
+*                        scatter gather mode data transfer and corrected
+*                        XZDma_SetChDataConfig API to set over fetch and
+*                        src issue parameters correctly.
+
+* 

+*
+******************************************************************************/
+#ifndef XZDMA_H_
+#define XZDMA_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xzdma_hw.h"
+#include "xil_assert.h"
+#include "xstatus.h"
+#include "xil_cache.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/**************************** Type Definitions *******************************/
+
+/** @name ZDMA Handler Types
+ * @{
+ */
+typedef enum {
+	XZDMA_HANDLER_DONE,	/**< For Done Handler */
+	XZDMA_HANDLER_ERROR,	/**< For Error Handler */
+} XZDma_Handler;
+/*@}*/
+
+/** @name ZDMA Descriptors Types
+ * @{
+ */
+typedef enum {
+	XZDMA_LINEAR,		/**< Linear descriptor */
+	XZDMA_LINKEDLIST,	/**< Linked list descriptor */
+} XZDma_DscrType;
+/*@}*/
+
+/** @name ZDMA Operation modes
+ * @{
+ */
+typedef enum {
+	XZDMA_NORMAL_MODE,	/**< Normal transfer from source to
+				  *  destination*/
+	XZDMA_WRONLY_MODE,	/**< Write only mode */
+	XZDMA_RDONLY_MODE	/**< Read only mode */
+} XZDma_Mode;
+/*@}*/
+
+/** @name ZDMA state
+ * @{
+ */
+typedef enum {
+	XZDMA_IDLE,		/**< ZDMA is in Idle state */
+	XZDMA_PAUSE,		/**< Paused state */
+	XZDMA_BUSY,		/**< Busy state */
+} XZDmaState;
+/*@}*/
+
+/** @name ZDMA AXI Burst type
+ * @{
+ */
+typedef enum {
+	XZDMA_FIXED_BURST = 0,	/**< Fixed burst type */
+	XZDMA_INCR_BURST	/**< Increment burst type */
+} XZDma_BurstType;
+/*@}*/
+
+/******************************************************************************/
+/**
+* This typedef contains scatter gather descriptor fields for ZDMA core.
+*/
+typedef struct {
+	void *SrcDscrPtr;	/**< Source Descriptor pointer */
+	void *DstDscrPtr;	/**< Destination Descriptor pointer */
+	u32 DscrCount;		/**< Count of descriptors available */
+	XZDma_DscrType DscrType;/**< Type of descriptor either Linear or
+				  *  Linked list type */
+} XZDma_Descriptor;
+
+/******************************************************************************/
+/**
+* This typedef contains scatter gather descriptor fields for ZDMA core.
+*/
+typedef struct {
+	u64 Address;	/**< Address */
+	u32 Size;	/**< Word2, Size of data */
+	u32 Cntl;	/**< Word3 Control data */
+	u64 NextDscr; 	/**< Address of next descriptor */
+	u64 Reserved;	/**< Reserved address */
+} __attribute__ ((packed)) XZDma_LlDscr;
+
+/******************************************************************************/
+/**
+* This typedef contains Linear descriptor fields for ZDMA core.
+*/
+typedef struct {
+	u64 Address;	/**< Address */
+	u32 Size;	/**< Word3, Size of data */
+	u32 Cntl;	/**< Word4, control data */
+}  __attribute__ ((packed)) XZDma_LiDscr;
+
+/******************************************************************************/
+/**
+*
+* This typedef contains the data configurations of ZDMA core
+*/
+typedef struct {
+	u8 OverFetch;		/**< Enable Over fetch */
+	u8 SrcIssue;		/**< Outstanding transactions for Source */
+	XZDma_BurstType SrcBurstType;
+				/**< Burst type for SRC */
+	u8 SrcBurstLen;		/**< AXI length for data read */
+	XZDma_BurstType DstBurstType;
+				/**< Burst type for DST */
+	u8 DstBurstLen;		/**< AXI length for data write */
+	u8 SrcCache;		/**< AXI cache bits for data read */
+	u8 SrcQos;		/**< AXI QOS bits for data read */
+	u8 DstCache;		/**< AXI cache bits for data write */
+	u8 DstQos;		/**< AXI QOS bits for data write */
+} XZDma_DataConfig;
+
+/******************************************************************************/
+/**
+*
+* This typedef contains the descriptor configurations of ZDMA core
+*/
+typedef struct{
+	u8 AxCoherent;	/**< AXI transactions are coherent or non-coherent */
+	u8 AXCache;	/**< AXI cache for DSCR fetch */
+	u8 AXQos;	/**< Qos bit for DSCR fetch */
+} XZDma_DscrConfig;
+
+/******************************************************************************/
+/**
+* Callback type for Completion of all data transfers.
+*
+* @param 	CallBackRef is a callback reference passed in by the upper layer
+*		when setting the callback functions, and passed back to the
+*		upper layer when the callback is invoked.
+*******************************************************************************/
+typedef void (*XZDma_DoneHandler) (void *CallBackRef);
+
+/******************************************************************************/
+/**
+* Callback type for all error interrupts.
+*
+* @param 	CallBackRef is a callback reference passed in by the upper layer
+*		when setting the callback functions, and passed back to the
+*		upper layer when the callback is invoked.
+* @param	ErrorMask is a bit mask indicating the cause of the error. Its
+*		value equals 'OR'ing one or more XZDMA_IXR_* values defined in
+*		xzdma_hw.h
+****************************************************************************/
+typedef void (*XZDma_ErrorHandler) (void *CallBackRef, u32 ErrorMask);
+
+/**
+* This typedef contains configuration information for a ZDMA core
+* Each ZDMA core should have a configuration structure associated.
+*/
+typedef struct {
+	u16 DeviceId;		/**< Device Id of ZDMA */
+	u32 BaseAddress;	/**< BaseAddress of ZDMA */
+	u8 DmaType;		/**< Type of DMA */
+} XZDma_Config;
+
+/******************************************************************************/
+/**
+*
+* The XZDma driver instance data structure. A pointer to an instance data
+* structure is passed around by functions to refer to a specific driver
+* instance.
+*/
+typedef struct {
+	XZDma_Config Config;	/**< Hardware configuration */
+	u32 IsReady;		/**< Device and the driver instance
+				  *  are initialized */
+	u32 IntrMask;		/**< Mask for enabling interrupts */
+
+	XZDma_Mode Mode;	/**< Mode of ZDMA core to be operated */
+	u8 IsSgDma;		/**< Is ZDMA core is in scatter gather or
+				  *  not will be specified */
+	XZDma_Descriptor Descriptor;	/**< It contains information about
+					  * descriptors */
+
+	XZDma_DoneHandler DoneHandler;	/**< Call back for transfer
+					  *  done interrupt */
+	void *DoneRef;			/**< To be passed to the done
+					  * interrupt callback */
+
+	XZDma_ErrorHandler ErrorHandler;/**< Call back for error
+					  *  interrupt */
+	void *ErrorRef;			/**< To be passed to the error
+					  * interrupt callback */
+	XZDma_DataConfig DataConfig;	/**< Current configurations */
+	XZDma_DscrConfig DscrConfig;	/**< Current configurations */
+	XZDmaState ChannelState;	 /**< ZDMA channel is busy */
+
+} XZDma;
+
+/******************************************************************************/
+/**
+*
+* This typedef contains the fields for transfer of data.
+*/
+typedef struct {
+	UINTPTR SrcAddr;	/**< Source address */
+	UINTPTR DstAddr;	/**< Destination Address */
+	u32 Size;		/**< Size of the data to be transferred */
+	u8 SrcCoherent;		/**< Source coherent */
+	u8 DstCoherent;		/**< Destination coherent */
+	u8 Pause;		/**< Will pause data transmission after
+				  *  this transfer only for SG mode */
+} XZDma_Transfer;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/**
+*
+* This function returns interrupt status read from Interrupt Status Register.
+* Use the XZDMA_IXR_DMA_*_MASK constants defined in xzdma_hw.h to interpret the
+* returned value.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	The pending interrupts of the ZDMA core.
+*		Use the masks specified in xzdma_hw.h to interpret
+*		the returned value.
+* @note
+* 		C-style signature:
+*		void XZDma_IntrGetStatus(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_IntrGetStatus(InstancePtr) \
+	XZDma_ReadReg((InstancePtr)->Config.BaseAddress, XZDMA_CH_ISR_OFFSET)
+
+/*****************************************************************************/
+/**
+*
+* This function clears interrupt(s). Every bit set in Interrupt Status
+* Register indicates that a specific type of interrupt is occurring, and this
+* function clears one or more interrupts by writing a bit mask to Interrupt
+* Clear Register.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Mask is the type of the interrupts to enable. Use OR'ing of
+*		XZDMA_IXR_DMA_*_MASK constants defined in xzdma_hw.h to create
+*		this parameter value.
+*
+* @return	None.
+*
+* @note
+* 		C-style signature:
+*		void XZDma_IntrClear(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_IntrClear(InstancePtr, Mask) \
+	XZDma_WriteReg( (InstancePtr)->Config.BaseAddress, \
+	XZDMA_CH_ISR_OFFSET, ((u32)(Mask) & (u32)XZDMA_IXR_ALL_INTR_MASK))
+
+/*****************************************************************************/
+/**
+*
+* This function returns interrupt mask to know which interrupts are
+* enabled and which of them were disabled.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	The current interrupt mask. The mask indicates which interrupts
+*		are enabled/disabled.
+*		0 bit represents .....corresponding interrupt is enabled.
+*		1 bit represents .....Corresponding interrupt is disabled.
+*
+* @note
+* 		C-style signature:
+*		void XZDma_GetIntrMask(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_GetIntrMask(InstancePtr) \
+	XZDma_ReadReg((InstancePtr)->Config.BaseAddress,  \
+			(u32)(XZDMA_CH_IMR_OFFSET))
+
+/*****************************************************************************/
+/**
+*
+* This function enables individual interrupts of the ZDMA core by updating
+* the Interrupt Enable register.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Mask is the type of the interrupts to enable. Use OR'ing of
+*		XZDMA_IXR_DMA_*_MASK constants defined in xzdma_hw.h to create
+*		this parameter value.
+*
+* @return	None.
+*
+* @note		The existing enabled interrupt(s) will remain enabled.
+* 		C-style signature:
+*		void XZDma_EnableIntr(XZDma *InstancePtr, u32 Mask)
+*
+******************************************************************************/
+#define XZDma_EnableIntr(InstancePtr, Mask) \
+	(InstancePtr)->IntrMask = ((InstancePtr)->IntrMask | (Mask))
+
+/*****************************************************************************/
+/**
+*
+* This function disables individual interrupts of the ZDMA core by updating
+* the Interrupt Disable register.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+* @param	Mask is the type of the interrupts to disable. Use OR'ing of
+*		XZDMA_IXR_DMA_*_MASK constants defined in xzdma_hw.h to create
+*		this parameter value.
+*
+* @return	None.
+*
+* @note		The existing disabled interrupt(s) will remain disabled.
+* 		C-style signature:
+*		void XZDma_DisableIntr(XZDma *InstancePtr, u32 Mask)
+*
+******************************************************************************/
+#define XZDma_DisableIntr(InstancePtr, Mask) \
+	XZDma_WriteReg( (InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_IDS_OFFSET, \
+	((u32)XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+	XZDMA_CH_IDS_OFFSET) | ((u32)(Mask) & (u32)XZDMA_IXR_ALL_INTR_MASK)))
+
+/*****************************************************************************/
+/**
+*
+* This function returns source current payload address under process
+* of ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		This address may not be precise due to ZDMA pipeline structure
+*		C-style signature:
+*		u64 XZDma_SrcCurPyld(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_SrcCurPyld(InstancePtr) \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_SRC_CUR_PYLD_LSB_OFFSET)) | \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+	XZDMA_CH_SRC_CUR_PYLD_MSB_OFFSET)) << XZDMA_WORD1_MSB_SHIFT))
+
+/*****************************************************************************/
+/**
+*
+* This function returns destination current payload address under process
+* of ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		This address may not be precise due to ZDMA pipeline structure
+*		C-style signature:
+*		u64 XZDma_DstCurPyld(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_DstCurPyld(InstancePtr) \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_DST_CUR_PYLD_LSB_OFFSET)) | \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+	XZDMA_CH_DST_CUR_PYLD_MSB_OFFSET)) << XZDMA_WORD1_MSB_SHIFT))
+
+/*****************************************************************************/
+/**
+*
+* This function returns source descriptor current payload address under
+* process of ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		This address may not be precise due to ZDMA pipeline structure
+*		C-style signature:
+*		u64 XZDma_SrcDscrCurPyld(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_SrcDscrCurPyld(InstancePtr) \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_SRC_CUR_DSCR_LSB_OFFSET)) | \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+	XZDMA_CH_SRC_CUR_DSCR_MSB_OFFSET)) << XZDMA_WORD1_MSB_SHIFT))
+
+
+/*****************************************************************************/
+/**
+*
+* This function returns destination descriptor current payload address under
+* process of ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		This address may not be precise due to ZDMA pipeline structure
+*		C-style signature:
+*		u64 XZDma_DstDscrCurPyld(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_DstDscrCurPyld(InstancePtr) \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_DST_CUR_DSCR_LSB_OFFSET)) | \
+	((u64)(XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+	XZDMA_CH_DST_CUR_DSCR_MSB_OFFSET)) << XZDMA_WORD1_MSB_SHIFT))
+
+/*****************************************************************************/
+/**
+*
+* This function gets the count of total bytes transferred through core
+* since last clear in ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note
+*		C-style signature:
+*		void XZDma_GetTotalByte(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_GetTotalByte(InstancePtr) \
+	XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_TOTAL_BYTE_OFFSET)
+
+/*****************************************************************************/
+/**
+*
+* This function clears the count of total bytes transferred in ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note
+*		C-style signature:
+*		void XZDma_TotalByteClear(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_TotalByteClear(InstancePtr) \
+	XZDma_WriteReg((InstancePtr)->Config.BaseAddress, \
+		XZDMA_CH_TOTAL_BYTE_OFFSET, \
+	XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+		XZDMA_CH_TOTAL_BYTE_OFFSET))
+
+/*****************************************************************************/
+/**
+*
+* This function gets the total number of Interrupt count for source after last
+* call of this API.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		Once this API is called then count will become zero.
+*		C-style signature:
+*		void XZDma_GetSrcIntrCnt(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_GetSrcIntrCnt(InstancePtr) \
+	XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_IRQ_SRC_ACCT_OFFSET)
+
+/*****************************************************************************/
+/**
+*
+* This function gets the total number of Interrupt count for destination
+* after last call of this API.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		Once this API is called then count will become zero.
+*		C-style signature:
+*		void XZDma_GetDstIntrCnt(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_GetDstIntrCnt(InstancePtr) \
+	XZDma_ReadReg((InstancePtr)->Config.BaseAddress, \
+			XZDMA_CH_IRQ_DST_ACCT_OFFSET)
+
+/*****************************************************************************/
+/**
+*
+* This function Enable's the ZDMA core for initiating the data transfer once the
+* data transfer completes it will be automatically disabled.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		None.
+*		C-style signature:
+*		void XZDma_EnableCh(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_EnableCh(InstancePtr) \
+	XZDma_WriteReg((InstancePtr)->Config.BaseAddress, \
+			(XZDMA_CH_CTRL2_OFFSET), (XZDMA_CH_CTRL2_EN_MASK))
+
+/*****************************************************************************/
+/**
+*
+* This function Disable's the ZDMA core.
+*
+* @param	InstancePtr is a pointer to the XZDma instance.
+*
+* @return	None.
+*
+* @note		None.
+*		C-style signature:
+*		void XZDma_DisableCh(XZDma *InstancePtr)
+*
+******************************************************************************/
+#define XZDma_DisableCh(InstancePtr) \
+	XZDma_WriteReg((InstancePtr)->Config.BaseAddress,\
+		(XZDMA_CH_CTRL2_OFFSET), (XZDMA_CH_CTRL2_DIS_MASK))
+
+/************************ Prototypes of functions **************************/
+
+XZDma_Config *XZDma_LookupConfig(u16 DeviceId);
+
+s32 XZDma_CfgInitialize(XZDma *InstancePtr, XZDma_Config *CfgPtr,
+			u32 EffectiveAddr);
+s32 XZDma_SetMode(XZDma *InstancePtr, u8 IsSgDma, XZDma_Mode Mode);
+u32 XZDma_CreateBDList(XZDma *InstancePtr, XZDma_DscrType TypeOfDscr,
+					UINTPTR Dscr_MemPtr, u32 NoOfBytes);
+s32 XZDma_SetChDataConfig(XZDma *InstancePtr, XZDma_DataConfig *Configure);
+void XZDma_GetChDataConfig(XZDma *InstancePtr, XZDma_DataConfig *Configure);
+s32 XZDma_SetChDscrConfig(XZDma *InstancePtr, XZDma_DscrConfig *Configure);
+void XZDma_GetChDscrConfig(XZDma *InstancePtr, XZDma_DscrConfig *Configure);
+s32 XZDma_Start(XZDma *InstancePtr, XZDma_Transfer *Data, u32 Num);
+void XZDma_WOData(XZDma *InstancePtr, u32 *Buffer);
+void XZDma_Resume(XZDma *InstancePtr);
+void XZDma_Reset(XZDma *InstancePtr);
+XZDmaState XZDma_ChannelState(XZDma *InstancePtr);
+
+s32 XZDma_SelfTest(XZDma *InstancePtr);
+
+void XZDma_IntrHandler(void *Instance);
+s32 XZDma_SetCallBack(XZDma *InstancePtr, XZDma_Handler HandlerType,
+	void *CallBackFunc, void *CallBackRef);
+
+/*@}*/
+
+#ifdef __cplusplus
+}
+
+#endif
+
+#endif /* XZDMA_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_g.c
new file mode 100644
index 000000000..33202264d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_g.c
@@ -0,0 +1,131 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by HSI.
+* Version: 
+* DO NOT EDIT.
+*
+* Copyright (C) 2010-2016 Xilinx, Inc. All Rights Reserved.*
+*Permission is hereby granted, free of charge, to any person obtaining a copy
+*of this software and associated documentation files (the Software), to deal
+*in the Software without restriction, including without limitation the rights
+*to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+*copies of the Software, and to permit persons to whom the Software is
+*furnished to do so, subject to the following conditions:
+*
+*The above copyright notice and this permission notice shall be included in
+*all copies or substantial portions of the Software.
+* 
+* Use of the Software is limited solely to applications:
+*(a) running on a Xilinx device, or
+*(b) that interact with a Xilinx device through a bus or interconnect.
+*
+*THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+*IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+*FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+*XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+*WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
+*OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*Except as contained in this notice, the name of the Xilinx shall not be used
+*in advertising or otherwise to promote the sale, use or other dealings in
+*this Software without prior written authorization from Xilinx.
+*
+
+* 
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xzdma.h"
+
+/*
+* The configuration table for devices
+*/
+
+XZDma_Config XZDma_ConfigTable[] =
+{
+	{
+		XPAR_PSU_ADMA_0_DEVICE_ID,
+		XPAR_PSU_ADMA_0_BASEADDR,
+		XPAR_PSU_ADMA_0_DMA_MODE
+	},
+	{
+		XPAR_PSU_ADMA_1_DEVICE_ID,
+		XPAR_PSU_ADMA_1_BASEADDR,
+		XPAR_PSU_ADMA_1_DMA_MODE
+	},
+	{
+		XPAR_PSU_ADMA_2_DEVICE_ID,
+		XPAR_PSU_ADMA_2_BASEADDR,
+		XPAR_PSU_ADMA_2_DMA_MODE
+	},
+	{
+		XPAR_PSU_ADMA_3_DEVICE_ID,
+		XPAR_PSU_ADMA_3_BASEADDR,
+		XPAR_PSU_ADMA_3_DMA_MODE
+	},
+	{
+		XPAR_PSU_ADMA_4_DEVICE_ID,
+		XPAR_PSU_ADMA_4_BASEADDR,
+		XPAR_PSU_ADMA_4_DMA_MODE
+	},
+	{
+		XPAR_PSU_ADMA_5_DEVICE_ID,
+		XPAR_PSU_ADMA_5_BASEADDR,
+		XPAR_PSU_ADMA_5_DMA_MODE
+	},
+	{
+		XPAR_PSU_ADMA_6_DEVICE_ID,
+		XPAR_PSU_ADMA_6_BASEADDR,
+		XPAR_PSU_ADMA_6_DMA_MODE
+	},
+	{
+		XPAR_PSU_ADMA_7_DEVICE_ID,
+		XPAR_PSU_ADMA_7_BASEADDR,
+		XPAR_PSU_ADMA_7_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_0_DEVICE_ID,
+		XPAR_PSU_GDMA_0_BASEADDR,
+		XPAR_PSU_GDMA_0_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_1_DEVICE_ID,
+		XPAR_PSU_GDMA_1_BASEADDR,
+		XPAR_PSU_GDMA_1_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_2_DEVICE_ID,
+		XPAR_PSU_GDMA_2_BASEADDR,
+		XPAR_PSU_GDMA_2_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_3_DEVICE_ID,
+		XPAR_PSU_GDMA_3_BASEADDR,
+		XPAR_PSU_GDMA_3_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_4_DEVICE_ID,
+		XPAR_PSU_GDMA_4_BASEADDR,
+		XPAR_PSU_GDMA_4_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_5_DEVICE_ID,
+		XPAR_PSU_GDMA_5_BASEADDR,
+		XPAR_PSU_GDMA_5_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_6_DEVICE_ID,
+		XPAR_PSU_GDMA_6_BASEADDR,
+		XPAR_PSU_GDMA_6_DMA_MODE
+	},
+	{
+		XPAR_PSU_GDMA_7_DEVICE_ID,
+		XPAR_PSU_GDMA_7_BASEADDR,
+		XPAR_PSU_GDMA_7_DMA_MODE
+	}
+};
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_hw.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_hw.h
new file mode 100644
index 000000000..85f630228
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_hw.h
@@ -0,0 +1,383 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xzdma_hw.h
+* @addtogroup zdma_v1_0
+* @{
+*
+* This header file contains identifiers and register-level driver functions (or
+* macros) that can be used to access the Xilinx ZDMA core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ------------------------------------------------------
+* 1.0   vns     2/27/15  First release
+* 

+*
+******************************************************************************/
+#ifndef XZDMA_HW_H_
+#define XZDMA_HW_H_		/**< Prevent circular inclusions
+				  *  by using protection macros	*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************** Include Files *********************************/
+
+#include "xil_io.h"
+
+/************************** Constant Definitions *****************************/
+
+/** @name Registers offsets
+ * @{
+ */
+#define XZDMA_ERR_CTRL				(0x000U)
+#define XZDMA_CH_ECO				(0x004U)
+#define XZDMA_CH_ISR_OFFSET			(0x100U)
+#define XZDMA_CH_IMR_OFFSET			(0x104U)
+#define XZDMA_CH_IEN_OFFSET			(0x108U)
+#define XZDMA_CH_IDS_OFFSET			(0x10CU)
+#define XZDMA_CH_CTRL0_OFFSET			(0x110U)
+#define XZDMA_CH_CTRL1_OFFSET			(0x114U)
+#define XZDMA_CH_PERIF_OFFSET			(0x118U)
+#define XZDMA_CH_STS_OFFSET			(0x11CU)
+#define XZDMA_CH_DATA_ATTR_OFFSET		(0x120U)
+#define XZDMA_CH_DSCR_ATTR_OFFSET		(0x124U)
+#define XZDMA_CH_SRC_DSCR_WORD0_OFFSET		(0x128U)
+#define XZDMA_CH_SRC_DSCR_WORD1_OFFSET		(0x12CU)
+#define XZDMA_CH_SRC_DSCR_WORD2_OFFSET		(0x130U)
+#define XZDMA_CH_SRC_DSCR_WORD3_OFFSET		(0x134U)
+#define XZDMA_CH_DST_DSCR_WORD0_OFFSET		(0x138U)
+#define XZDMA_CH_DST_DSCR_WORD1_OFFSET		(0x13CU)
+#define XZDMA_CH_DST_DSCR_WORD2_OFFSET		(0x140U)
+#define XZDMA_CH_DST_DSCR_WORD3_OFFSET		(0x144U)
+#define XZDMA_CH_WR_ONLY_WORD0_OFFSET		(0x148U)
+#define XZDMA_CH_WR_ONLY_WORD1_OFFSET		(0x14CU)
+#define XZDMA_CH_WR_ONLY_WORD2_OFFSET		(0x150U)
+#define XZDMA_CH_WR_ONLY_WORD3_OFFSET		(0x154U)
+#define XZDMA_CH_SRC_START_LSB_OFFSET		(0x158U)
+#define XZDMA_CH_SRC_START_MSB_OFFSET		(0x15CU)
+#define XZDMA_CH_DST_START_LSB_OFFSET		(0x160U)
+#define XZDMA_CH_DST_START_MSB_OFFSET		(0x164U)
+#define XZDMA_CH_SRC_CUR_PYLD_LSB_OFFSET	(0x168U)
+#define XZDMA_CH_SRC_CUR_PYLD_MSB_OFFSET	(0x16CU)
+#define XZDMA_CH_DST_CUR_PYLD_LSB_OFFSET	(0x170U)
+#define XZDMA_CH_DST_CUR_PYLD_MSB_OFFSET	(0x174U)
+#define XZDMA_CH_SRC_CUR_DSCR_LSB_OFFSET	(0x178U)
+#define XZDMA_CH_SRC_CUR_DSCR_MSB_OFFSET	(0x17CU)
+#define XZDMA_CH_DST_CUR_DSCR_LSB_OFFSET	(0x180U)
+#define XZDMA_CH_DST_CUR_DSCR_MSB_OFFSET	(0x184U)
+#define XZDMA_CH_TOTAL_BYTE_OFFSET		(0x188U)
+#define XZDMA_CH_RATE_CNTL_OFFSET		(0x18CU)
+#define XZDMA_CH_IRQ_SRC_ACCT_OFFSET		(0x190U)
+#define XZDMA_CH_IRQ_DST_ACCT_OFFSET		(0x194U)
+#define XZDMA_CH_CTRL2_OFFSET			(0x200U)
+/*@}*/
+
+/** @name Interrupt Enable/Disable/Mask/Status registers bit masks and shifts
+ * @{
+ */
+#define XZDMA_IXR_DMA_PAUSE_MASK	(0x00000800U) /**< IXR pause mask */
+#define XZDMA_IXR_DMA_DONE_MASK		(0x00000400U) /**< IXR done mask */
+#define XZDMA_IXR_AXI_WR_DATA_MASK	(0x00000200U) /**< IXR AXI write data
+							*  error mask */
+#define XZDMA_IXR_AXI_RD_DATA_MASK	(0x00000100U) /**< IXR AXI read data
+							*  error mask */
+#define XZDMA_IXR_AXI_RD_DST_DSCR_MASK	(0x00000080U) /**< IXR AXI read
+							*  descriptor error
+							*  mask */
+#define XZDMA_IXR_AXI_RD_SRC_DSCR_MASK	(0x00000040U) /**< IXR AXI write
+							*  descriptor error
+							*  mask */
+#define XZDMA_IXR_DST_ACCT_ERR_MASK	(0x00000020U) /**< IXR DST interrupt
+							*  count overflow
+							*  mask */
+#define XZDMA_IXR_SRC_ACCT_ERR_MASK	(0x00000010U) /**< IXR SRC interrupt
+							*  count overflow
+							*  mask */
+#define XZDMA_IXR_BYTE_CNT_OVRFL_MASK	(0x00000008U) /**< IXR byte count over
+							* flow mask */
+#define XZDMA_IXR_DST_DSCR_DONE_MASK	(0x00000004U) /**< IXR destination
+							*  descriptor done
+							*  mask */
+#define XZDMA_IXR_SRC_DSCR_DONE_MASK	(0x00000002U) /**< IXR source
+							*  descriptor done
+							*  mask */
+#define XZDMA_IXR_INV_APB_MASK		(0x00000001U) /**< IXR invalid APB
+							*  access mask */
+#define XZDMA_IXR_ALL_INTR_MASK		(0x00000FFFU) /**< IXR OR of all the
+							*  interrupts mask */
+#define XZDMA_IXR_DONE_MASK		(0x00000400U) /**< IXR All done mask */
+
+#define XZDMA_IXR_ERR_MASK		(0x00000BF9U) /**< IXR all Error mask*/
+					/**< Or of XZDMA_IXR_AXI_WR_DATA_MASK,
+					  * XZDMA_IXR_AXI_RD_DATA_MASK,
+					  * XZDMA_IXR_AXI_RD_DST_DSCR_MASK,
+					  * XZDMA_IXR_AXI_RD_SRC_DSCR_MASK,
+					  * XZDMA_IXR_INV_APB_MASK,
+					  * XZDMA_IXR_DMA_PAUSE_MASK,
+					  * XZDMA_IXR_BYTE_CNT_OVRFL_MASK,
+					  * XZDMA_IXR_SRC_ACCT_ERR_MASK,
+					  *  XZDMA_IXR_DST_ACCT_ERR_MASK */
+/*@}*/
+
+/** @name Channel Control0 register bit masks and shifts
+ * @{
+ */
+#define XZDMA_CTRL0_OVR_FETCH_MASK	(0x00000080U) /**< Over fetch mask */
+#define XZDMA_CTRL0_POINT_TYPE_MASK	(0x00000040U) /**< Pointer type mask */
+#define XZDMA_CTRL0_MODE_MASK		(0x00000030U) /**< Mode mask */
+#define XZDMA_CTRL0_WRONLY_MASK		(0x00000010U) /**< Write only mask */
+#define XZDMA_CTRL0_RDONLY_MASK		(0x00000020U) /**< Read only mask */
+#define XZDMA_CTRL0_RATE_CNTL_MASK	(0x00000008U) /**< Rate control mask */
+#define XZDMA_CTRL0_CONT_ADDR_MASK	(0x00000004U) /**< Continue address
+							*  specified mask */
+#define XZDMA_CTRL0_CONT_MASK		(0x00000002U) /**< Continue mask */
+
+#define XZDMA_CTRL0_OVR_FETCH_SHIFT	(7U)	/**< Over fetch shift */
+#define XZDMA_CTRL0_POINT_TYPE_SHIFT	(6U)	/**< Pointer type shift */
+#define XZDMA_CTRL0_MODE_SHIFT		(4U)	/**< Mode type shift */
+#define XZDMA_CTRL0_RESET_VALUE		(0x00000080U) /**< CTRL0 reset value */
+
+/*@}*/
+
+/** @name Channel Control1 register bit masks and shifts
+ * @{
+ */
+#define XZDMA_CTRL1_SRC_ISSUE_MASK	(0x0000001FU) /**< Source issue mask */
+#define XZDMA_CTRL1_RESET_VALUE		(0x000003FFU) /**< CTRL1 reset value */
+/*@}*/
+
+/** @name Channel Peripheral register bit masks and shifts
+ * @{
+ */
+#define XZDMA_PERIF_PROG_CELL_CNT_MASK	(0x0000003EU) /**< Peripheral program
+							*  cell count */
+#define XZDMA_PERIF_SIDE_MASK		(0x00000002U) /**< Interface attached
+							* the side mask */
+#define XZDMA_PERIF_EN_MASK		(0x00000001U) /**< Peripheral flow
+							* control mask */
+/*@}*/
+
+/** @name Channel Status register bit masks and shifts
+ * @{
+ */
+#define XZDMA_STS_DONE_ERR_MASK	(0x00000003U) /**< Done with errors mask */
+#define XZDMA_STS_BUSY_MASK	(0x00000002U) /**< ZDMA is busy in transfer
+						*  mask */
+#define XZDMA_STS_PAUSE_MASK	(0x00000001U) /**< ZDMA is in Pause state
+						*  mask */
+#define XZDMA_STS_DONE_MASK	(0x00000000U) /**< ZDMA done mask */
+#define XZDMA_STS_ALL_MASK	(0x00000003U) /**< ZDMA status mask */
+
+/*@}*/
+
+/** @name Channel Data Attribute register bit masks and shifts
+ * @{
+ */
+#define XZDMA_DATA_ATTR_ARBURST_MASK	(0x0C000000U) /**< Data ArBurst mask */
+#define XZDMA_DATA_ATTR_ARCACHE_MASK	(0x03C00000U) /**< Data ArCache mask */
+#define XZDMA_DATA_ATTR_ARQOS_MASK	(0x003C0000U) /**< Data ARQos masks */
+#define XZDMA_DATA_ATTR_ARLEN_MASK	(0x0003C000U) /**< Data Arlen mask */
+#define XZDMA_DATA_ATTR_AWBURST_MASK	(0x00003000U) /**< Data Awburst mask */
+#define XZDMA_DATA_ATTR_AWCACHE_MASK	(0x00000F00U) /**< Data AwCache mask */
+#define XZDMA_DATA_ATTR_AWQOS_MASK	(0x000000F0U) /**< Data AwQos mask */
+#define XZDMA_DATA_ATTR_AWLEN_MASK	(0x0000000FU) /**< Data Awlen mask */
+
+#define XZDMA_DATA_ATTR_ARBURST_SHIFT	(26U) /**< Data Arburst shift */
+#define XZDMA_DATA_ATTR_ARCACHE_SHIFT	(22U) /**< Data ArCache shift */
+#define XZDMA_DATA_ATTR_ARQOS_SHIFT	(18U) /**< Data ARQos shift */
+#define XZDMA_DATA_ATTR_ARLEN_SHIFT	(14U) /**< Data Arlen shift */
+#define XZDMA_DATA_ATTR_AWBURST_SHIFT	(12U) /**< Data Awburst shift  */
+#define XZDMA_DATA_ATTR_AWCACHE_SHIFT	(8U)  /**< Data Awcache shift */
+#define XZDMA_DATA_ATTR_AWQOS_SHIFT	(4U)  /**< Data Awqos shift */
+#define XZDMA_DATA_ATTR_RESET_VALUE	(0x0483D20FU) /**< Data Attributes
+							*  reset value */
+
+/*@}*/
+
+/** @name Channel DSCR Attribute register bit masks and shifts
+ * @{
+ */
+#define XZDMA_DSCR_ATTR_AXCOHRNT_MASK	(0x00000100U) /**< Descriptor coherent
+							*  mask */
+#define XZDMA_DSCR_ATTR_AXCACHE_MASK	(0x000000F0U) /**< Descriptor cache
+							* mask */
+#define XZDMA_DSCR_ATTR_AXQOS_MASK	(0x0000000FU) /**< Descriptor AxQos
+							*  mask */
+
+#define XZDMA_DSCR_ATTR_AXCOHRNT_SHIFT	(8U) /**< Descriptor coherent shift */
+#define XZDMA_DSCR_ATTR_AXCACHE_SHIFT	(7U) /**< Descriptor cache shift */
+#define XZDMA_DSCR_ATTR_RESET_VALUE	(0x00000000U) /**< Dscr Attributes
+							*  reset value */
+
+/*@}*/
+
+/** @name Channel Source/Destination Word0 register bit mask
+ * @{
+ */
+#define XZDMA_WORD0_LSB_MASK	(0xFFFFFFFFU)	/**< LSB Address mask */
+/*@}*/
+
+/** @name Channel Source/Destination Word1 register bit mask
+ * @{
+ */
+#define XZDMA_WORD1_MSB_MASK	(0x0001FFFFU)	/**< MSB Address mask */
+#define XZDMA_WORD1_MSB_SHIFT	(32U)		/**< MSB Address shift */
+/*@}*/
+
+/** @name Channel Source/Destination Word2 register bit mask
+ * @{
+ */
+#define XZDMA_WORD2_SIZE_MASK	(0x3FFFFFFFU) /**< Size mask */
+/*@}*/
+
+/** @name Channel Source/Destination Word3 register bit masks and shifts
+ * @{
+ */
+#define XZDMA_WORD3_CMD_MASK		(0x00000018U)	/**< Cmd mask */
+#define XZDMA_WORD3_CMD_SHIFT		(3U)		/**< Cmd shift */
+#define XZDMA_WORD3_CMD_NXTVALID_MASK	(0x00000000U)	/**< Next Dscr is valid
+							  *  mask */
+#define XZDMA_WORD3_CMD_PAUSE_MASK	(0x00000008U)	/**< Pause after this
+							  * dscr mask */
+#define XZDMA_WORD3_CMD_STOP_MASK	(0x00000010U)	/**< Stop after this
+							..*  dscr mask */
+#define XZDMA_WORD3_INTR_MASK		(0x00000004U)	/**< Interrupt
+							  *  enable or disable
+							  *  mask */
+#define XZDMA_WORD3_INTR_SHIFT		(2U)		/**< Interrupt enable
+							  *  disable
+							  *  shift */
+#define XZDMA_WORD3_TYPE_MASK		(0x00000002U)	/**< Type of Descriptor
+							  *  mask */
+#define XZDMA_WORD3_TYPE_SHIFT		(1U)		/**< Type of Descriptor
+							  *  Shift */
+#define XZDMA_WORD3_COHRNT_MASK		(0x00000001U)	/**< Coherence mask */
+/*@}*/
+
+/** @name Channel Source/Destination start address or current payload
+ *  MSB register bit mask
+ * @{
+ */
+#define XZDMA_START_MSB_ADDR_MASK	(0x0001FFFFU)	/**< Start msb address
+							  *  mask */
+/*@}*/
+
+/** @name Channel Rate control count register bit mask
+ * @{
+ */
+#define XZDMA_CH_RATE_CNTL_MASK		(0x00000FFFU) /**< Channel rate control
+							*  mask */
+/*@}*/
+
+/** @name Channel Source/Destination Interrupt account count register bit mask
+ * @{
+ */
+#define XZDMA_CH_IRQ_ACCT_MASK		(0x000000FFU) /**< Interrupt count
+							*  mask */
+/*@}*/
+
+/** @name Channel debug register 0/1 bit mask
+ * @{
+ */
+#define XZDMA_CH_DBG_CMN_BUF_MASK	(0x000001FFU) /**< Common buffer count
+							* mask */
+/*@}*/
+
+/** @name Channel control2 register bit mask
+ * @{
+ */
+#define XZDMA_CH_CTRL2_EN_MASK		(0x00000001U) /**< Channel enable
+							*  mask */
+#define XZDMA_CH_CTRL2_DIS_MASK		(0x00000000U) /**< Channel disable
+							*  mask */
+/*@}*/
+
+/** @name Channel control2 register bit mask
+ * @{
+ */
+ #define XZDMA_WRITE_TO_CLEAR_MASK	(0x00000000U) /**< Write to clear
+							*  mask */
+ /*@}*/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+#define XZDma_In32		Xil_In32	/**< Input operation */
+#define XZDma_Out32		Xil_Out32	/**< Output operation */
+
+/*****************************************************************************/
+/**
+*
+* This macro reads the given register.
+*
+* @param	BaseAddress is the Xilinx base address of the ZDMA core.
+* @param	RegOffset is the register offset of the register.
+*
+* @return	The 32-bit value of the register.
+*
+* @note		C-style signature:
+*		u32 XZDma_ReadReg(u32 BaseAddress, u32 RegOffset)
+*
+******************************************************************************/
+#define XZDma_ReadReg(BaseAddress, RegOffset) \
+		XZDma_In32((BaseAddress) + (u32)(RegOffset))
+
+/*****************************************************************************/
+/**
+*
+* This macro writes the value into the given register.
+*
+* @param	BaseAddress is the Xilinx base address of the ZDMA core.
+* @param	RegOffset is the register offset of the register.
+* @param	Data is the 32-bit value to write to the register.
+*
+* @return	None.
+*
+* @note		C-style signature:
+*		void XZDma_WriteReg(u32 BaseAddress, u32 RegOffset, u32 Data)
+*
+******************************************************************************/
+#define XZDma_WriteReg(BaseAddress, RegOffset, Data) \
+		XZDma_Out32(((BaseAddress) + (u32)(RegOffset)), (u32)(Data))
+
+#ifdef __cplusplus
+}
+
+#endif
+
+#endif /* XZDMA_HW_H_ */
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_intr.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_intr.c
new file mode 100644
index 000000000..e828d16a4
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_intr.c
@@ -0,0 +1,205 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xzdma_intr.c
+* @addtogroup zdma_v1_0
+* @{
+*
+* This file contains interrupt related functions of Xilinx ZDMA core.
+* Please see xzdma.h for more details of the driver.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ------------------------------------------------------
+* 1.0   vns     2/27/15  First release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xzdma.h"
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/************************** Function Definitions *****************************/
+
+
+/*****************************************************************************/
+/**
+*
+* This function is the interrupt handler for the ZDMA core.
+*
+* This handler reads the pending interrupt from Status register, determines the
+* source of the interrupts and calls the respective callbacks for the
+* interrupts that are enabled in IRQ_ENABLE register, and finally clears the
+* interrupts.
+*
+* The application is responsible for connecting this function to the interrupt
+* system. Application beyond this driver is also responsible for providing
+* callbacks to handle interrupts and installing the callbacks using
+* XZDma_SetCallBack() during initialization phase. .
+*
+* @param	Instance is a pointer to the XZDma instance to be worked on.
+*
+* @return	None.
+*
+* @note		To generate interrupt required interrupts should be enabled.
+*
+******************************************************************************/
+void XZDma_IntrHandler(void *Instance)
+{
+	u32 PendingIntr;
+	u32 ErrorStatus;
+	XZDma *InstancePtr = NULL;
+	InstancePtr = (XZDma *)((void *)Instance);
+
+	/* Verify arguments. */
+	Xil_AssertVoid(InstancePtr != NULL);
+
+	/* Get pending interrupts */
+	PendingIntr = (u32)(XZDma_IntrGetStatus(InstancePtr));
+	PendingIntr &= (~XZDma_GetIntrMask(InstancePtr));
+
+	/* ZDMA transfer has completed */
+	ErrorStatus = (PendingIntr) & (XZDMA_IXR_DMA_DONE_MASK);
+	if ((ErrorStatus) != 0U) {
+		XZDma_DisableIntr(InstancePtr, XZDMA_IXR_ALL_INTR_MASK);
+		InstancePtr->ChannelState = XZDMA_IDLE;
+		InstancePtr->DoneHandler(InstancePtr->DoneRef);
+	}
+
+	/* An error has been occurred */
+	ErrorStatus = PendingIntr & (XZDMA_IXR_ERR_MASK);
+	if ((ErrorStatus) != 0U) {
+		if ((ErrorStatus & XZDMA_IXR_DMA_PAUSE_MASK) ==
+				XZDMA_IXR_DMA_PAUSE_MASK) {
+			InstancePtr->ChannelState = XZDMA_PAUSE;
+		}
+		else {
+			if ((ErrorStatus & (XZDMA_IXR_AXI_WR_DATA_MASK |
+				XZDMA_IXR_AXI_RD_DATA_MASK |
+				XZDMA_IXR_AXI_RD_DST_DSCR_MASK |
+				XZDMA_IXR_AXI_RD_SRC_DSCR_MASK)) != 0x00U) {
+				InstancePtr->ChannelState = XZDMA_IDLE;
+			}
+		}
+		InstancePtr->ErrorHandler(InstancePtr->ErrorRef, ErrorStatus);
+	}
+
+	/* Clear pending interrupt(s) */
+	XZDma_IntrClear(InstancePtr, PendingIntr);
+}
+
+/*****************************************************************************/
+/**
+*
+* This routine installs an asynchronous callback function for the given
+* HandlerType.
+*
+* 
+* HandlerType              Callback Function Type
+* -----------------------  --------------------------------------------------
+* XZDMA_HANDLER_DONE	   Done handler
+* XZDMA_HANDLER_ERROR	   Error handler
+*
+* 

+*
+* @param	InstancePtr is a pointer to the XZDma instance to be worked on.
+* @param	HandlerType specifies which callback is to be attached.
+* @param	CallBackFunc is the address of the callback function.
+* @param	CallBackRef is a user data item that will be passed to the
+* 		callback function when it is invoked.
+*
+* @return
+*		- XST_SUCCESS when handler is installed.
+*		- XST_INVALID_PARAM when HandlerType is invalid.
+*
+* @note		Invoking this function for a handler that already has been
+*		installed replaces it with the new handler.
+*
+******************************************************************************/
+s32 XZDma_SetCallBack(XZDma *InstancePtr, XZDma_Handler HandlerType,
+	void *CallBackFunc, void *CallBackRef)
+{
+	s32 Status;
+
+	/* Verify arguments. */
+	Xil_AssertNonvoid(InstancePtr != NULL);
+	Xil_AssertNonvoid(CallBackFunc != NULL);
+	Xil_AssertNonvoid(CallBackRef != NULL);
+	Xil_AssertNonvoid((HandlerType == XZDMA_HANDLER_DONE) ||
+				(HandlerType == XZDMA_HANDLER_ERROR));
+	Xil_AssertNonvoid(InstancePtr->IsReady ==
+				(u32)(XIL_COMPONENT_IS_READY));
+
+	/*
+	 * Calls the respective callback function corresponding to
+	 * the handler type
+	 */
+	switch (HandlerType) {
+		case XZDMA_HANDLER_DONE:
+			InstancePtr->DoneHandler =
+				(XZDma_DoneHandler)((void *)CallBackFunc);
+			InstancePtr->DoneRef = CallBackRef;
+			Status = (XST_SUCCESS);
+			break;
+
+		case XZDMA_HANDLER_ERROR:
+			InstancePtr->ErrorHandler =
+				(XZDma_ErrorHandler)((void *)CallBackFunc);
+			InstancePtr->ErrorRef = CallBackRef;
+			Status = (XST_SUCCESS);
+			break;
+
+		default:
+			Status = (XST_INVALID_PARAM);
+			break;
+	}
+
+	return Status;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_selftest.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_selftest.c
new file mode 100644
index 000000000..893a5402f
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_selftest.c
@@ -0,0 +1,119 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xzdma_selftest.c
+* @addtogroup zdma_v1_0
+* @{
+*
+* This file contains the self-test function for the ZDMA core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ------------------------------------------------------
+* 1.0   vns     2/27/15  First release
+* 

+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xzdma.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/************************** Function Definitions *****************************/
+
+/*****************************************************************************/
+/**
+*
+* This file contains a diagnostic self-test function for the ZDMA driver.
+* Refer to the header file xzdma.h for more detailed information.
+*
+* @param	InstancePtr is a pointer to XZDma instance.
+*
+* @return
+*		- XST_SUCCESS if the test is successful.
+*		- XST_FAILURE if the test is failed.
+*
+* @note		None.
+*
+******************************************************************************/
+s32 XZDma_SelfTest(XZDma *InstancePtr)
+{
+
+	u32 Data;
+	s32 Status;
+
+	Xil_AssertNonvoid(InstancePtr != NULL);
+
+	Data = XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+				XZDMA_CH_CTRL0_OFFSET);
+
+	/* Changing DMA channel to over fetch */
+
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress, XZDMA_CH_CTRL0_OFFSET,
+			(Data | XZDMA_CTRL0_OVR_FETCH_MASK));
+
+	if (((u32)XZDma_ReadReg(InstancePtr->Config.BaseAddress,
+		XZDMA_CH_CTRL0_OFFSET) & XZDMA_CTRL0_OVR_FETCH_MASK) !=
+						XZDMA_CTRL0_OVR_FETCH_MASK) {
+		Status = (s32)XST_FAILURE;
+	}
+	else {
+		Status = (s32)XST_SUCCESS;
+	}
+
+	/* Retrieving the change settings */
+	XZDma_WriteReg(InstancePtr->Config.BaseAddress, XZDMA_CH_CTRL0_OFFSET,
+				Data);
+
+	return Status;
+
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_sinit.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_sinit.c
new file mode 100644
index 000000000..ae2c44d1c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/zdma_v1_1/src/xzdma_sinit.c
@@ -0,0 +1,106 @@
+/******************************************************************************
+*
+* Copyright (C) 2014 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xzdma_sinit.c
+* @addtogroup zdma_v1_0
+* @{
+*
+* This file contains static initialization methods for Xilinx ZDMA core.
+*
+* 
+* MODIFICATION HISTORY:
+*
+* Ver   Who     Date     Changes
+* ----- ------  -------- ------------------------------------------------------
+* 1.0   vns     2/27/15  First release
+* 

+*
+******************************************************************************/
+/***************************** Include Files *********************************/
+
+#include "xzdma.h"
+#include "xparameters.h"
+
+/************************** Constant Definitions *****************************/
+
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+
+/**************************** Type Definitions *******************************/
+
+
+/************************** Function Prototypes ******************************/
+
+
+/************************** Variable Definitions *****************************/
+
+
+/************************** Function Definitions *****************************/
+
+/*****************************************************************************/
+/**
+*
+* XZDma_LookupConfig returns a reference to an XZDma_Config structure
+* based on the unique device id, DeviceId. The return value will refer
+* to an entry in the device configuration table defined in the xzdma_g.c
+* file.
+*
+* @param	DeviceId is the unique device ID of the device for the lookup
+*		operation.
+*
+* @return	CfgPtr is a reference to a config record in the configuration
+*		table (in xzdma_g.c) corresponding to DeviceId, or
+*		NULL if no match is found.
+*
+* @note		None.
+******************************************************************************/
+XZDma_Config *XZDma_LookupConfig(u16 DeviceId)
+{
+	extern XZDma_Config XZDma_ConfigTable[XPAR_XZDMA_NUM_INSTANCES];
+	XZDma_Config *CfgPtr = NULL;
+	u32 Index;
+
+	/* Checks all the instances */
+	for (Index = (u32)0x0; Index < (u32)(XPAR_XZDMA_NUM_INSTANCES);
+								Index++) {
+		if (XZDma_ConfigTable[Index].DeviceId == DeviceId) {
+			CfgPtr = &XZDma_ConfigTable[Index];
+			break;
+		}
+	}
+
+	return (XZDma_Config *)CfgPtr;
+}
+/** @} */
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/system.mss b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/system.mss
new file mode 100644
index 000000000..5a742ad93
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/system.mss
@@ -0,0 +1,694 @@
+
+ PARAMETER VERSION = 2.2.0
+
+
+BEGIN OS
+ PARAMETER OS_NAME = standalone
+ PARAMETER OS_VER = 5.4
+ PARAMETER PROC_INSTANCE = psu_cortexr5_0
+ PARAMETER stdin = psu_uart_0
+ PARAMETER stdout = psu_uart_0
+END
+
+
+BEGIN PROCESSOR
+ PARAMETER DRIVER_NAME = cpu_cortexr5
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_cortexr5_0
+ PARAMETER extra_compiler_flags = -g -DARMR5 -mfpu=vfpv3-d16
+END
+
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = scugic
+ PARAMETER DRIVER_VER = 3.2
+ PARAMETER HW_INSTANCE = psu_acpu_gic
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_2
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_3
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_4
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_5
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_6
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_adma_7
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_afi_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_afi_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_afi_2
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_afi_3
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_afi_4
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_afi_5
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_afi_6
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = sysmonpsu
+ PARAMETER DRIVER_VER = 1.0
+ PARAMETER HW_INSTANCE = psu_ams
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = axipmon
+ PARAMETER DRIVER_VER = 6.4
+ PARAMETER HW_INSTANCE = psu_apm_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = axipmon
+ PARAMETER DRIVER_VER = 6.4
+ PARAMETER HW_INSTANCE = psu_apm_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = axipmon
+ PARAMETER DRIVER_VER = 6.4
+ PARAMETER HW_INSTANCE = psu_apm_2
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = axipmon
+ PARAMETER DRIVER_VER = 6.4
+ PARAMETER HW_INSTANCE = psu_apm_5
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_apu
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_bbram_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = canps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_can_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_cci_gpv
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_cci_reg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = coresightps_dcc
+ PARAMETER DRIVER_VER = 1.2
+ PARAMETER HW_INSTANCE = psu_coresight_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_crf_apb
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_crl_apb
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_csu_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = csudma
+ PARAMETER DRIVER_VER = 1.0
+ PARAMETER HW_INSTANCE = psu_csudma
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_phy
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_qos_ctrl
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_xmpu0_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_xmpu1_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_xmpu2_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_xmpu3_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_xmpu4_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddr_xmpu5_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ddrc_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_dp
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_dpdma
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_efuse
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = emacps
+ PARAMETER DRIVER_VER = 3.2
+ PARAMETER HW_INSTANCE = psu_ethernet_3
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_fpd_gpv
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_fpd_slcr
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_fpd_slcr_secure
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_fpd_xmpu_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_fpd_xmpu_sink
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_2
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_3
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_4
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_5
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_6
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = zdma
+ PARAMETER DRIVER_VER = 1.1
+ PARAMETER HW_INSTANCE = psu_gdma_7
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = gpiops
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_gpio_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_gpu
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = iicps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_i2c_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = iicps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_i2c_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_iou_s
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_iou_scntr
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_iou_scntrs
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_iousecure_slcr
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_iouslcr_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = ipipsu
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ipi_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = ipipsu
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ipi_2
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_lpd_slcr
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_lpd_slcr_secure
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_lpd_xppu
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_lpd_xppu_sink
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_mbistjtag
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ocm
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ocm_ram_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ocm_ram_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_ocm_xmpu_cfg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_pcie
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_pcie_attrib_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_pcie_dma
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_pmu_global_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_pmu_iomodule
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_pmu_ram
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = qspipsu
+ PARAMETER DRIVER_VER = 1.0
+ PARAMETER HW_INSTANCE = psu_qspi_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_qspi_linear_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_0_atcm
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_0_atcm_lockstep
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_0_btcm
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_0_btcm_lockstep
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_1_atcm
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_1_btcm
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_ddr_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_r5_tcm_ram_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = scugic
+ PARAMETER DRIVER_VER = 3.2
+ PARAMETER HW_INSTANCE = psu_rcpu_gic
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_rpu
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_rsa
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = rtcpsu
+ PARAMETER DRIVER_VER = 1.2
+ PARAMETER HW_INSTANCE = psu_rtc
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_sata
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = sdps
+ PARAMETER DRIVER_VER = 2.7
+ PARAMETER HW_INSTANCE = psu_sd_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_serdes
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_siou
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_smmu_gpv
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_smmu_reg
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = ttcps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_ttc_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = ttcps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_ttc_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = ttcps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_ttc_2
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = ttcps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_ttc_3
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = uartps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_uart_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = uartps
+ PARAMETER DRIVER_VER = 3.1
+ PARAMETER HW_INSTANCE = psu_uart_1
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = generic
+ PARAMETER DRIVER_VER = 2.0
+ PARAMETER HW_INSTANCE = psu_usb_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = wdtps
+ PARAMETER DRIVER_VER = 3.0
+ PARAMETER HW_INSTANCE = psu_wdt_0
+END
+
+BEGIN DRIVER
+ PARAMETER DRIVER_NAME = wdtps
+ PARAMETER DRIVER_VER = 3.0
+ PARAMETER HW_INSTANCE = psu_wdt_1
+END
+
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/.project b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/.project
new file mode 100644
index 000000000..78fcf3cf0
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/.project
@@ -0,0 +1,41 @@
+
+
+	ZynqMP_ZCU102_hw_platform
+	Created by SDK v2016.1
+	
+	
+	
+	
+	
+		com.xilinx.sdk.hw.HwProject
+	
+	
+		
+			1462451796084
+			
+			6
+			
+				org.eclipse.ui.ide.multiFilter
+				1.0-name-matches-false-false-*.xml
+			
+		
+		
+			1462451796084
+			
+			6
+			
+				org.eclipse.ui.ide.multiFilter
+				1.0-name-matches-false-false-*.svd
+			
+		
+		
+			1462451796094
+			
+			6
+			
+				org.eclipse.ui.ide.multiFilter
+				1.0-name-matches-false-false-*.hwh
+			
+		
+	
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.c
new file mode 100644
index 000000000..ec9441e4c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.c
@@ -0,0 +1,19394 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file psu_init.c
+*
+* This file is automatically generated 
+*
+*****************************************************************************/
+
+#include 
+#include 
+#include "psu_init.h"
+
+int mask_pollOnValue(u32 add , u32 mask, u32 value );
+
+int mask_poll(u32 add , u32 mask );
+
+void mask_delay(u32 delay);
+
+u32 mask_read(u32 add , u32 mask );
+
+static void PSU_Mask_Write (unsigned long offset, unsigned long mask, unsigned long val)
+{
+	unsigned long RegVal = 0x0;
+	RegVal = Xil_In32 (offset);
+	RegVal &= ~(mask);
+	RegVal |= (val & mask);
+	Xil_Out32 (offset, RegVal);
+}
+
+	void prog_reg (unsigned long addr, unsigned long mask, unsigned long shift, unsigned long value) {
+	    int rdata =0;
+	    rdata  = Xil_In32(addr);
+	    rdata  = rdata & (~mask);
+	    rdata  = rdata | (value << shift);
+	    Xil_Out32(addr,rdata);
+	    } 
+
+unsigned long psu_pll_init_data() {
+		// : RPLL INIT
+		/*Register : RPLL_CFG @ 0XFF5E0034

+
+		PLL loop filter resistor control
+		PSU_CRL_APB_RPLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRL_APB_RPLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRL_APB_RPLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRL_APB_RPLL_CFG_LOCK_CNT                                                   0x258
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRL_APB_RPLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFF5E0034, 0xFE7FEDEFU ,0x7E4B0C62U)  
+		RegMask = (CRL_APB_RPLL_CFG_RES_MASK | CRL_APB_RPLL_CFG_CP_MASK | CRL_APB_RPLL_CFG_LFHF_MASK | CRL_APB_RPLL_CFG_LOCK_CNT_MASK | CRL_APB_RPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRL_APB_RPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRL_APB_RPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRL_APB_RPLL_CFG_LFHF_SHIFT
+			| 0x00000258U << CRL_APB_RPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRL_APB_RPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRL_APB_RPLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRL_APB_RPLL_CTRL_FBDIV                                                     0x48
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRL_APB_RPLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00717F00U ,0x00014800U)  
+		RegMask = (CRL_APB_RPLL_CTRL_PRE_SRC_MASK | CRL_APB_RPLL_CTRL_FBDIV_MASK | CRL_APB_RPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000048U << CRL_APB_RPLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRL_APB_RPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00717F00U ,0x00014800U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000008U)  
+		RegMask = (CRL_APB_RPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_RPLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000001U)  
+		RegMask = (CRL_APB_RPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_RPLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000000U)  
+		RegMask = (CRL_APB_RPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFF5E0040

+
+		RPLL is locked
+		PSU_CRL_APB_PLL_STATUS_RPLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFF5E0040, 0x00000002U ,0x00000002U)  */
+		mask_poll(CRL_APB_PLL_STATUS_OFFSET,0x00000002U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_RPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : RPLL_TO_FPD_CTRL @ 0XFF5E0048

+
+		Divisor value for this clock.
+		PSU_CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFF5E0048, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_TO_FPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : RPLL FRAC CFG
+		/*Register : RPLL_FRAC_CFG @ 0XFF5E0038

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRL_APB_RPLL_FRAC_CFG_ENABLED                                               0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRL_APB_RPLL_FRAC_CFG_DATA                                                  0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFF5E0038, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRL_APB_RPLL_FRAC_CFG_ENABLED_MASK | CRL_APB_RPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRL_APB_RPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : IOPLL INIT
+		/*Register : IOPLL_CFG @ 0XFF5E0024

+
+		PLL loop filter resistor control
+		PSU_CRL_APB_IOPLL_CFG_RES                                                       0xc
+
+		PLL charge pump control
+		PSU_CRL_APB_IOPLL_CFG_CP                                                        0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRL_APB_IOPLL_CFG_LFHF                                                      0x3
+
+		Lock circuit counter setting
+		PSU_CRL_APB_IOPLL_CFG_LOCK_CNT                                                  0x339
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRL_APB_IOPLL_CFG_LOCK_DLY                                                  0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFF5E0024, 0xFE7FEDEFU ,0x7E672C6CU)  
+		RegMask = (CRL_APB_IOPLL_CFG_RES_MASK | CRL_APB_IOPLL_CFG_CP_MASK | CRL_APB_IOPLL_CFG_LFHF_MASK | CRL_APB_IOPLL_CFG_LOCK_CNT_MASK | CRL_APB_IOPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x0000000CU << CRL_APB_IOPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRL_APB_IOPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRL_APB_IOPLL_CFG_LFHF_SHIFT
+			| 0x00000339U << CRL_APB_IOPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRL_APB_IOPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E672C6CU);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRL_APB_IOPLL_CTRL_PRE_SRC                                                  0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRL_APB_IOPLL_CTRL_FBDIV                                                    0x2d
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRL_APB_IOPLL_CTRL_DIV2                                                     0x0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00717F00U ,0x00002D00U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_PRE_SRC_MASK | CRL_APB_IOPLL_CTRL_FBDIV_MASK | CRL_APB_IOPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_PRE_SRC_SHIFT
+			| 0x0000002DU << CRL_APB_IOPLL_CTRL_FBDIV_SHIFT
+			| 0x00000000U << CRL_APB_IOPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00717F00U ,0x00002D00U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000008U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_IOPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_IOPLL_CTRL_RESET                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000001U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_IOPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_IOPLL_CTRL_RESET                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000000U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFF5E0040

+
+		IOPLL is locked
+		PSU_CRL_APB_PLL_STATUS_IOPLL_LOCK                                               1
+		(OFFSET, MASK, VALUE)      (0XFF5E0040, 0x00000001U ,0x00000001U)  */
+		mask_poll(CRL_APB_PLL_STATUS_OFFSET,0x00000001U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : IOPLL_TO_FPD_CTRL @ 0XFF5E0044

+
+		Divisor value for this clock.
+		PSU_CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0                                          0x3
+
+		Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFF5E0044, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_TO_FPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : IOPLL FRAC CFG
+		/*Register : IOPLL_FRAC_CFG @ 0XFF5E0028

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRL_APB_IOPLL_FRAC_CFG_ENABLED                                              0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRL_APB_IOPLL_FRAC_CFG_DATA                                                 0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFF5E0028, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRL_APB_IOPLL_FRAC_CFG_ENABLED_MASK | CRL_APB_IOPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRL_APB_IOPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : APU_PLL INIT
+		/*Register : APLL_CFG @ 0XFD1A0024

+
+		PLL loop filter resistor control
+		PSU_CRF_APB_APLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRF_APB_APLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRF_APB_APLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRF_APB_APLL_CFG_LOCK_CNT                                                   0x258
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRF_APB_APLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFD1A0024, 0xFE7FEDEFU ,0x7E4B0C62U)  
+		RegMask = (CRF_APB_APLL_CFG_RES_MASK | CRF_APB_APLL_CFG_CP_MASK | CRF_APB_APLL_CFG_LFHF_MASK | CRF_APB_APLL_CFG_LOCK_CNT_MASK | CRF_APB_APLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_APLL_CFG_RES_SHIFT
+			| 0x00000003U << CRF_APB_APLL_CFG_CP_SHIFT
+			| 0x00000003U << CRF_APB_APLL_CFG_LFHF_SHIFT
+			| 0x00000258U << CRF_APB_APLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRF_APB_APLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRF_APB_APLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRF_APB_APLL_CTRL_FBDIV                                                     0x42
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRF_APB_APLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00717F00U ,0x00014200U)  
+		RegMask = (CRF_APB_APLL_CTRL_PRE_SRC_MASK | CRF_APB_APLL_CTRL_FBDIV_MASK | CRF_APB_APLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000042U << CRF_APB_APLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRF_APB_APLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00717F00U ,0x00014200U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_APLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_APLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_APLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_APLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000001U)  
+		RegMask = (CRF_APB_APLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_APLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_APLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000000U)  
+		RegMask = (CRF_APB_APLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFD1A0044

+
+		APLL is locked
+		PSU_CRF_APB_PLL_STATUS_APLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000001U ,0x00000001U)  */
+		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000001U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_APLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_APLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : APLL_TO_LPD_CTRL @ 0XFD1A0048

+
+		Divisor value for this clock.
+		PSU_CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFD1A0048, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : APLL FRAC CFG
+		/*Register : APLL_FRAC_CFG @ 0XFD1A0028

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRF_APB_APLL_FRAC_CFG_ENABLED                                               0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRF_APB_APLL_FRAC_CFG_DATA                                                  0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFD1A0028, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRF_APB_APLL_FRAC_CFG_ENABLED_MASK | CRF_APB_APLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRF_APB_APLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : DDR_PLL INIT
+		/*Register : DPLL_CFG @ 0XFD1A0030

+
+		PLL loop filter resistor control
+		PSU_CRF_APB_DPLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRF_APB_DPLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRF_APB_DPLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRF_APB_DPLL_CFG_LOCK_CNT                                                   0x258
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRF_APB_DPLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFD1A0030, 0xFE7FEDEFU ,0x7E4B0C62U)  
+		RegMask = (CRF_APB_DPLL_CFG_RES_MASK | CRF_APB_DPLL_CFG_CP_MASK | CRF_APB_DPLL_CFG_LFHF_MASK | CRF_APB_DPLL_CFG_LOCK_CNT_MASK | CRF_APB_DPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRF_APB_DPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRF_APB_DPLL_CFG_LFHF_SHIFT
+			| 0x00000258U << CRF_APB_DPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRF_APB_DPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRF_APB_DPLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRF_APB_DPLL_CTRL_FBDIV                                                     0x40
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRF_APB_DPLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00717F00U ,0x00014000U)  
+		RegMask = (CRF_APB_DPLL_CTRL_PRE_SRC_MASK | CRF_APB_DPLL_CTRL_FBDIV_MASK | CRF_APB_DPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000040U << CRF_APB_DPLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRF_APB_DPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00717F00U ,0x00014000U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_DPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_DPLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000001U)  
+		RegMask = (CRF_APB_DPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_DPLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000000U)  
+		RegMask = (CRF_APB_DPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFD1A0044

+
+		DPLL is locked
+		PSU_CRF_APB_PLL_STATUS_DPLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000002U ,0x00000002U)  */
+		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000002U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_DPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DPLL_TO_LPD_CTRL @ 0XFD1A004C

+
+		Divisor value for this clock.
+		PSU_CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFD1A004C, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : DPLL FRAC CFG
+		/*Register : DPLL_FRAC_CFG @ 0XFD1A0034

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRF_APB_DPLL_FRAC_CFG_ENABLED                                               0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRF_APB_DPLL_FRAC_CFG_DATA                                                  0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFD1A0034, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRF_APB_DPLL_FRAC_CFG_ENABLED_MASK | CRF_APB_DPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRF_APB_DPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : VIDEO_PLL INIT
+		/*Register : VPLL_CFG @ 0XFD1A003C

+
+		PLL loop filter resistor control
+		PSU_CRF_APB_VPLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRF_APB_VPLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRF_APB_VPLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRF_APB_VPLL_CFG_LOCK_CNT                                                   0x28a
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRF_APB_VPLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFD1A003C, 0xFE7FEDEFU ,0x7E514C62U)  
+		RegMask = (CRF_APB_VPLL_CFG_RES_MASK | CRF_APB_VPLL_CFG_CP_MASK | CRF_APB_VPLL_CFG_LFHF_MASK | CRF_APB_VPLL_CFG_LOCK_CNT_MASK | CRF_APB_VPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_VPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRF_APB_VPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRF_APB_VPLL_CFG_LFHF_SHIFT
+			| 0x0000028AU << CRF_APB_VPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRF_APB_VPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E514C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRF_APB_VPLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRF_APB_VPLL_CTRL_FBDIV                                                     0x39
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRF_APB_VPLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00717F00U ,0x00013900U)  
+		RegMask = (CRF_APB_VPLL_CTRL_PRE_SRC_MASK | CRF_APB_VPLL_CTRL_FBDIV_MASK | CRF_APB_VPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000039U << CRF_APB_VPLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRF_APB_VPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00717F00U ,0x00013900U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_VPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_VPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_VPLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000001U)  
+		RegMask = (CRF_APB_VPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_VPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_VPLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000000U)  
+		RegMask = (CRF_APB_VPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFD1A0044

+
+		VPLL is locked
+		PSU_CRF_APB_PLL_STATUS_VPLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000004U ,0x00000004U)  */
+		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000004U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_VPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : VPLL_TO_LPD_CTRL @ 0XFD1A0050

+
+		Divisor value for this clock.
+		PSU_CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFD1A0050, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : VIDEO FRAC CFG
+		/*Register : VPLL_FRAC_CFG @ 0XFD1A0040

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRF_APB_VPLL_FRAC_CFG_ENABLED                                               0x1
+
+		Fractional value for the Feedback value.
+		PSU_CRF_APB_VPLL_FRAC_CFG_DATA                                                  0x820c
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFD1A0040, 0x8000FFFFU ,0x8000820CU)  
+		RegMask = (CRF_APB_VPLL_FRAC_CFG_ENABLED_MASK | CRF_APB_VPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_VPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x0000820CU << CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x8000820CU);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_clock_init_data() {
+		// : CLOCK CONTROL SLCR REGISTER
+		/*Register : GEM0_REF_CTRL @ 0XFF5E0050

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM0_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR0                                              0x8
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM0_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0050, 0x063F3F07U ,0x06010800U)  
+		RegMask = (CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000008U << CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM0_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM1_REF_CTRL @ 0XFF5E0054

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM1_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR0                                              0x8
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM1_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0054, 0x063F3F07U ,0x06010800U)  
+		RegMask = (CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000008U << CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM1_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM2_REF_CTRL @ 0XFF5E0058

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM2_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM2_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR0                                              0x8
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM2_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0058, 0x063F3F07U ,0x06010800U)  
+		RegMask = (CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000008U << CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM2_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM3_REF_CTRL @ 0XFF5E005C

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM3_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM3_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR0                                              0xc
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM3_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E005C, 0x063F3F07U ,0x06010C00U)  
+		RegMask = (CRL_APB_GEM3_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM3_REF_CTRL_CLKACT_MASK | CRL_APB_GEM3_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM3_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM3_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM3_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000CU << CRL_APB_GEM3_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM3_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010C00U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM_TSU_REF_CTRL @ 0XFF5E0100

+
+		6 bit divider
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0                                           0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_SRCSEL                                             0x2
+
+		6 bit divider
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1                                           0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0100, 0x013F3F07U ,0x01010602U)  
+		RegMask = (CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK | CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000006U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM_TSU_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010602U);
+	/*############################################################################################################################ */
+
+		/*Register : USB0_BUS_REF_CTRL @ 0XFF5E0060

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_CLKACT                                            0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0                                          0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_SRCSEL                                            0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0060, 0x023F3F07U ,0x02010600U)  
+		RegMask = (CRL_APB_USB0_BUS_REF_CTRL_CLKACT_MASK | CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000006U << CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_USB0_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010600U);
+	/*############################################################################################################################ */
+
+		/*Register : USB1_BUS_REF_CTRL @ 0XFF5E0064

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_CLKACT                                            0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0                                          0x4
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_SRCSEL                                            0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0064, 0x023F3F07U ,0x02010400U)  
+		RegMask = (CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000004U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_USB1_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010400U);
+	/*############################################################################################################################ */
+
+		/*Register : USB3_DUAL_REF_CTRL @ 0XFF5E004C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_CLKACT                                           0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1                                         0xf
+
+		6 bit divider
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0                                         0x5
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL. (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL                                           0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E004C, 0x023F3F07U ,0x020F0500U)  
+		RegMask = (CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_MASK | CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT
+			| 0x0000000FU << CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000005U << CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_USB3_DUAL_REF_CTRL_OFFSET ,0x023F3F07U ,0x020F0500U);
+	/*############################################################################################################################ */
+
+		/*Register : QSPI_REF_CTRL @ 0XFF5E0068

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_QSPI_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR0                                              0xc
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_QSPI_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0068, 0x013F3F07U ,0x01010C00U)  
+		RegMask = (CRL_APB_QSPI_REF_CTRL_CLKACT_MASK | CRL_APB_QSPI_REF_CTRL_DIVISOR1_MASK | CRL_APB_QSPI_REF_CTRL_DIVISOR0_MASK | CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_QSPI_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_QSPI_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000CU << CRL_APB_QSPI_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_QSPI_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010C00U);
+	/*############################################################################################################################ */
+
+		/*Register : SDIO0_REF_CTRL @ 0XFF5E006C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SDIO0_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR0                                             0x7
+
+		000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SDIO0_REF_CTRL_SRCSEL                                               0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E006C, 0x013F3F07U ,0x01010702U)  
+		RegMask = (CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000007U << CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SDIO0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U);
+	/*############################################################################################################################ */
+
+		/*Register : SDIO1_REF_CTRL @ 0XFF5E0070

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SDIO1_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR0                                             0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SDIO1_REF_CTRL_SRCSEL                                               0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0070, 0x013F3F07U ,0x01010602U)  
+		RegMask = (CRL_APB_SDIO1_REF_CTRL_CLKACT_MASK | CRL_APB_SDIO1_REF_CTRL_DIVISOR1_MASK | CRL_APB_SDIO1_REF_CTRL_DIVISOR0_MASK | CRL_APB_SDIO1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SDIO1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000006U << CRL_APB_SDIO1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SDIO1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SDIO1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010602U);
+	/*############################################################################################################################ */
+
+		/*Register : SDIO_CLK_CTRL @ 0XFF18030C

+
+		MIO pad selection for sdio1_rx_clk (feedback clock from the PAD) 0: MIO [51] 1: MIO [76]
+		PSU_IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL                                     0
+
+		SoC Debug Clock Control
+		(OFFSET, MASK, VALUE)      (0XFF18030C, 0x00020000U ,0x00000000U)  
+		RegMask = (IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_SDIO_CLK_CTRL_OFFSET ,0x00020000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : UART0_REF_CTRL @ 0XFF5E0074

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_UART0_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART0_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART0_REF_CTRL_DIVISOR0                                             0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_UART0_REF_CTRL_SRCSEL                                               0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0074, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_UART0_REF_CTRL_CLKACT_MASK | CRL_APB_UART0_REF_CTRL_DIVISOR1_MASK | CRL_APB_UART0_REF_CTRL_DIVISOR0_MASK | CRL_APB_UART0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_UART0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_UART0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_UART0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_UART0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_UART0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : UART1_REF_CTRL @ 0XFF5E0078

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_UART1_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART1_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART1_REF_CTRL_DIVISOR0                                             0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_UART1_REF_CTRL_SRCSEL                                               0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0078, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_UART1_REF_CTRL_CLKACT_MASK | CRL_APB_UART1_REF_CTRL_DIVISOR1_MASK | CRL_APB_UART1_REF_CTRL_DIVISOR0_MASK | CRL_APB_UART1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_UART1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_UART1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_UART1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_UART1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_UART1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : I2C0_REF_CTRL @ 0XFF5E0120

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_I2C0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR0                                              0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_I2C0_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0120, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_I2C0_REF_CTRL_CLKACT_MASK | CRL_APB_I2C0_REF_CTRL_DIVISOR1_MASK | CRL_APB_I2C0_REF_CTRL_DIVISOR0_MASK | CRL_APB_I2C0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_I2C0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_I2C0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_I2C0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_I2C0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_I2C0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : I2C1_REF_CTRL @ 0XFF5E0124

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_I2C1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR0                                              0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_I2C1_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0124, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_I2C1_REF_CTRL_CLKACT_MASK | CRL_APB_I2C1_REF_CTRL_DIVISOR1_MASK | CRL_APB_I2C1_REF_CTRL_DIVISOR0_MASK | CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_I2C1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_I2C1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_I2C1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_I2C1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : SPI0_REF_CTRL @ 0XFF5E007C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SPI0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR0                                              0x7
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SPI0_REF_CTRL_SRCSEL                                                0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E007C, 0x013F3F07U ,0x01010702U)  
+		RegMask = (CRL_APB_SPI0_REF_CTRL_CLKACT_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000007U << CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SPI0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U);
+	/*############################################################################################################################ */
+
+		/*Register : SPI1_REF_CTRL @ 0XFF5E0080

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SPI1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR0                                              0x7
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SPI1_REF_CTRL_SRCSEL                                                0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0080, 0x013F3F07U ,0x01010702U)  
+		RegMask = (CRL_APB_SPI1_REF_CTRL_CLKACT_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000007U << CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SPI1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U);
+	/*############################################################################################################################ */
+
+		/*Register : CAN0_REF_CTRL @ 0XFF5E0084

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_CAN0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR0                                              0xa
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CAN0_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0084, 0x013F3F07U ,0x01010A00U)  
+		RegMask = (CRL_APB_CAN0_REF_CTRL_CLKACT_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK | CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000AU << CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CAN0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U);
+	/*############################################################################################################################ */
+
+		/*Register : CAN1_REF_CTRL @ 0XFF5E0088

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_CAN1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR0                                              0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CAN1_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0088, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_CAN1_REF_CTRL_CLKACT_MASK | CRL_APB_CAN1_REF_CTRL_DIVISOR1_MASK | CRL_APB_CAN1_REF_CTRL_DIVISOR0_MASK | CRL_APB_CAN1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_CAN1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_CAN1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_CAN1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CAN1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : CPU_R5_CTRL @ 0XFF5E0090

+
+		Turing this off will shut down the OCM, some parts of the APM, and prevent transactions going from the FPD to the LPD and cou
+		d lead to system hang
+		PSU_CRL_APB_CPU_R5_CTRL_CLKACT                                                  0x1
+
+		6 bit divider
+		PSU_CRL_APB_CPU_R5_CTRL_DIVISOR0                                                0x3
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CPU_R5_CTRL_SRCSEL                                                  0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0090, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_CPU_R5_CTRL_CLKACT_MASK | CRL_APB_CPU_R5_CTRL_DIVISOR0_MASK | CRL_APB_CPU_R5_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CPU_R5_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_CPU_R5_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_CPU_R5_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CPU_R5_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : IOU_SWITCH_CTRL @ 0XFF5E009C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_IOU_SWITCH_CTRL_CLKACT                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_IOU_SWITCH_CTRL_DIVISOR0                                            0x6
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_IOU_SWITCH_CTRL_SRCSEL                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E009C, 0x01003F07U ,0x01000602U)  
+		RegMask = (CRL_APB_IOU_SWITCH_CTRL_CLKACT_MASK | CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_MASK | CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_IOU_SWITCH_CTRL_CLKACT_SHIFT
+			| 0x00000006U << CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOU_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
+	/*############################################################################################################################ */
+
+		/*Register : CSU_PLL_CTRL @ 0XFF5E00A0

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_CSU_PLL_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_CSU_PLL_CTRL_DIVISOR0                                               0x3
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CSU_PLL_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00A0, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_CSU_PLL_CTRL_CLKACT_MASK | CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK | CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CSU_PLL_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : PCAP_CTRL @ 0XFF5E00A4

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PCAP_CTRL_CLKACT                                                    0x1
+
+		6 bit divider
+		PSU_CRL_APB_PCAP_CTRL_DIVISOR0                                                  0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PCAP_CTRL_SRCSEL                                                    0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00A4, 0x01003F07U ,0x01000602U)  
+		RegMask = (CRL_APB_PCAP_CTRL_CLKACT_MASK | CRL_APB_PCAP_CTRL_DIVISOR0_MASK | CRL_APB_PCAP_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PCAP_CTRL_CLKACT_SHIFT
+			| 0x00000006U << CRL_APB_PCAP_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_PCAP_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PCAP_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
+	/*############################################################################################################################ */
+
+		/*Register : LPD_SWITCH_CTRL @ 0XFF5E00A8

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_LPD_SWITCH_CTRL_CLKACT                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_LPD_SWITCH_CTRL_DIVISOR0                                            0x3
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_LPD_SWITCH_CTRL_SRCSEL                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00A8, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_LPD_SWITCH_CTRL_CLKACT_MASK | CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_MASK | CRL_APB_LPD_SWITCH_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_LPD_SWITCH_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_LPD_SWITCH_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_LPD_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : LPD_LSBUS_CTRL @ 0XFF5E00AC

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_LPD_LSBUS_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_LPD_LSBUS_CTRL_DIVISOR0                                             0xf
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_LPD_LSBUS_CTRL_SRCSEL                                               0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00AC, 0x01003F07U ,0x01000F02U)  
+		RegMask = (CRL_APB_LPD_LSBUS_CTRL_CLKACT_MASK | CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_MASK | CRL_APB_LPD_LSBUS_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_LPD_LSBUS_CTRL_CLKACT_SHIFT
+			| 0x0000000FU << CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_LPD_LSBUS_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_LPD_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000F02U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_LPD_CTRL @ 0XFF5E00B0

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_DBG_LPD_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_DBG_LPD_CTRL_DIVISOR0                                               0x6
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_DBG_LPD_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00B0, 0x01003F07U ,0x01000602U)  
+		RegMask = (CRL_APB_DBG_LPD_CTRL_CLKACT_MASK | CRL_APB_DBG_LPD_CTRL_DIVISOR0_MASK | CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_DBG_LPD_CTRL_CLKACT_SHIFT
+			| 0x00000006U << CRL_APB_DBG_LPD_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_DBG_LPD_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
+	/*############################################################################################################################ */
+
+		/*Register : NAND_REF_CTRL @ 0XFF5E00B4

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_NAND_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_NAND_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_NAND_REF_CTRL_DIVISOR0                                              0xa
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_NAND_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00B4, 0x013F3F07U ,0x01010A00U)  
+		RegMask = (CRL_APB_NAND_REF_CTRL_CLKACT_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK | CRL_APB_NAND_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000AU << CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_NAND_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U);
+	/*############################################################################################################################ */
+
+		/*Register : ADMA_REF_CTRL @ 0XFF5E00B8

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_ADMA_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_ADMA_REF_CTRL_DIVISOR0                                              0x3
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_ADMA_REF_CTRL_SRCSEL                                                0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00B8, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_ADMA_REF_CTRL_CLKACT_MASK | CRL_APB_ADMA_REF_CTRL_DIVISOR0_MASK | CRL_APB_ADMA_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_ADMA_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_ADMA_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_ADMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : PL0_REF_CTRL @ 0XFF5E00C0

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL0_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL0_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL0_REF_CTRL_DIVISOR0                                               0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL0_REF_CTRL_SRCSEL                                                 0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00C0, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_PL0_REF_CTRL_CLKACT_MASK | CRL_APB_PL0_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL0_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_PL0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_PL0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_PL0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : PL1_REF_CTRL @ 0XFF5E00C4

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL1_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL1_REF_CTRL_DIVISOR1                                               0x4
+
+		6 bit divider
+		PSU_CRL_APB_PL1_REF_CTRL_DIVISOR0                                               0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL1_REF_CTRL_SRCSEL                                                 0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00C4, 0x013F3F07U ,0x01040F00U)  
+		RegMask = (CRL_APB_PL1_REF_CTRL_CLKACT_MASK | CRL_APB_PL1_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL1_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000004U << CRL_APB_PL1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_PL1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_PL1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01040F00U);
+	/*############################################################################################################################ */
+
+		/*Register : PL2_REF_CTRL @ 0XFF5E00C8

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL2_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL2_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL2_REF_CTRL_DIVISOR0                                               0x4
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL2_REF_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00C8, 0x013F3F07U ,0x01010402U)  
+		RegMask = (CRL_APB_PL2_REF_CTRL_CLKACT_MASK | CRL_APB_PL2_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL2_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL2_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL2_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_PL2_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000004U << CRL_APB_PL2_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_PL2_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL2_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010402U);
+	/*############################################################################################################################ */
+
+		/*Register : PL3_REF_CTRL @ 0XFF5E00CC

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL3_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL3_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL3_REF_CTRL_DIVISOR0                                               0x3
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL3_REF_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00CC, 0x013F3F07U ,0x01010302U)  
+		RegMask = (CRL_APB_PL3_REF_CTRL_CLKACT_MASK | CRL_APB_PL3_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL3_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL3_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL3_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_PL3_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000003U << CRL_APB_PL3_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_PL3_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL3_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010302U);
+	/*############################################################################################################################ */
+
+		/*Register : AMS_REF_CTRL @ 0XFF5E0108

+
+		6 bit divider
+		PSU_CRL_APB_AMS_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_AMS_REF_CTRL_DIVISOR0                                               0x1d
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_AMS_REF_CTRL_SRCSEL                                                 0x2
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_AMS_REF_CTRL_CLKACT                                                 0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0108, 0x013F3F07U ,0x01011D02U)  
+		RegMask = (CRL_APB_AMS_REF_CTRL_DIVISOR1_MASK | CRL_APB_AMS_REF_CTRL_DIVISOR0_MASK | CRL_APB_AMS_REF_CTRL_SRCSEL_MASK | CRL_APB_AMS_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_AMS_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000001DU << CRL_APB_AMS_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_AMS_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRL_APB_AMS_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_AMS_REF_CTRL_OFFSET ,0x013F3F07U ,0x01011D02U);
+	/*############################################################################################################################ */
+
+		/*Register : DLL_REF_CTRL @ 0XFF5E0104

+
+		000 = IOPLL; 001 = RPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This
+		is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_DLL_REF_CTRL_SRCSEL                                                 0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0104, 0x00000007U ,0x00000000U)  
+		RegMask = (CRL_APB_DLL_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_DLL_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_DLL_REF_CTRL_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : TIMESTAMP_REF_CTRL @ 0XFF5E0128

+
+		6 bit divider
+		PSU_CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0                                         0xf
+
+		1XX = pss_ref_clk; 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 
+		 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL                                           0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT                                           0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0128, 0x01003F07U ,0x01000F00U)  
+		RegMask = (CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_MASK | CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_MASK | CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x0000000FU << CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_TIMESTAMP_REF_CTRL_OFFSET ,0x01003F07U ,0x01000F00U);
+	/*############################################################################################################################ */
+
+		/*Register : SATA_REF_CTRL @ 0XFD1A00A0

+
+		000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_SATA_REF_CTRL_SRCSEL                                                0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_SATA_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRF_APB_SATA_REF_CTRL_DIVISOR0                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00A0, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_SATA_REF_CTRL_SRCSEL_MASK | CRF_APB_SATA_REF_CTRL_CLKACT_MASK | CRF_APB_SATA_REF_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_SATA_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_SATA_REF_CTRL_CLKACT_SHIFT
+			| 0x00000002U << CRF_APB_SATA_REF_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_SATA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : PCIE_REF_CTRL @ 0XFD1A00B4

+
+		000 = IOPLL_TO_FPD; 010 = RPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cyc
+		es of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_PCIE_REF_CTRL_SRCSEL                                                0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_PCIE_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRF_APB_PCIE_REF_CTRL_DIVISOR0                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00B4, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_PCIE_REF_CTRL_SRCSEL_MASK | CRF_APB_PCIE_REF_CTRL_CLKACT_MASK | CRF_APB_PCIE_REF_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_PCIE_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_PCIE_REF_CTRL_CLKACT_SHIFT
+			| 0x00000002U << CRF_APB_PCIE_REF_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_PCIE_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_VIDEO_REF_CTRL @ 0XFD1A0070

+
+		6 bit divider
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0                                          0x3
+
+		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL                                            0x3
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_CLKACT                                            0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0070, 0x013F3F07U ,0x01010303U)  
+		RegMask = (CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000003U << CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000003U << CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DP_VIDEO_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010303U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_AUDIO_REF_CTRL @ 0XFD1A0074

+
+		6 bit divider
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0                                          0x27
+
+		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL                                            0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_CLKACT                                            0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0074, 0x013F3F07U ,0x01012700U)  
+		RegMask = (CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000027U << CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DP_AUDIO_REF_CTRL_OFFSET ,0x013F3F07U ,0x01012700U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_STC_REF_CTRL @ 0XFD1A007C

+
+		6 bit divider
+		PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR1                                            0x1
+
+		6 bit divider
+		PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR0                                            0x11
+
+		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of t
+		e new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DP_STC_REF_CTRL_SRCSEL                                              0x3
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DP_STC_REF_CTRL_CLKACT                                              0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A007C, 0x013F3F07U ,0x01011103U)  
+		RegMask = (CRF_APB_DP_STC_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_STC_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_STC_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_STC_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DP_STC_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000011U << CRF_APB_DP_STC_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000003U << CRF_APB_DP_STC_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DP_STC_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DP_STC_REF_CTRL_OFFSET ,0x013F3F07U ,0x01011103U);
+	/*############################################################################################################################ */
+
+		/*Register : ACPU_CTRL @ 0XFD1A0060

+
+		6 bit divider
+		PSU_CRF_APB_ACPU_CTRL_DIVISOR0                                                  0x1
+
+		000 = APLL; 010 = DPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_ACPU_CTRL_SRCSEL                                                    0x0
+
+		Clock active signal. Switch to 0 to disable the clock. For the half speed APU Clock
+		PSU_CRF_APB_ACPU_CTRL_CLKACT_HALF                                               0x1
+
+		Clock active signal. Switch to 0 to disable the clock. For the full speed ACPUX Clock. This will shut off the high speed cloc
+		 to the entire APU
+		PSU_CRF_APB_ACPU_CTRL_CLKACT_FULL                                               0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0060, 0x03003F07U ,0x03000100U)  
+		RegMask = (CRF_APB_ACPU_CTRL_DIVISOR0_MASK | CRF_APB_ACPU_CTRL_SRCSEL_MASK | CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK | CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_ACPU_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_ACPU_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_ACPU_CTRL_CLKACT_HALF_SHIFT
+			| 0x00000001U << CRF_APB_ACPU_CTRL_CLKACT_FULL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_ACPU_CTRL_OFFSET ,0x03003F07U ,0x03000100U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_TRACE_CTRL @ 0XFD1A0064

+
+		6 bit divider
+		PSU_CRF_APB_DBG_TRACE_CTRL_DIVISOR0                                             0x2
+
+		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DBG_TRACE_CTRL_SRCSEL                                               0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DBG_TRACE_CTRL_CLKACT                                               0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0064, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_DBG_TRACE_CTRL_DIVISOR0_MASK | CRF_APB_DBG_TRACE_CTRL_SRCSEL_MASK | CRF_APB_DBG_TRACE_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DBG_TRACE_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DBG_TRACE_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DBG_TRACE_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DBG_TRACE_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_FPD_CTRL @ 0XFD1A0068

+
+		6 bit divider
+		PSU_CRF_APB_DBG_FPD_CTRL_DIVISOR0                                               0x2
+
+		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DBG_FPD_CTRL_SRCSEL                                                 0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DBG_FPD_CTRL_CLKACT                                                 0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0068, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_DBG_FPD_CTRL_DIVISOR0_MASK | CRF_APB_DBG_FPD_CTRL_SRCSEL_MASK | CRF_APB_DBG_FPD_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DBG_FPD_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DBG_FPD_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DBG_FPD_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DBG_FPD_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DDR_CTRL @ 0XFD1A0080

+
+		6 bit divider
+		PSU_CRF_APB_DDR_CTRL_DIVISOR0                                                   0x2
+
+		000 = DPLL; 001 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This 
+		s not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DDR_CTRL_SRCSEL                                                     0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0080, 0x00003F07U ,0x00000200U)  
+		RegMask = (CRF_APB_DDR_CTRL_DIVISOR0_MASK | CRF_APB_DDR_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DDR_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DDR_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DDR_CTRL_OFFSET ,0x00003F07U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : GPU_REF_CTRL @ 0XFD1A0084

+
+		6 bit divider
+		PSU_CRF_APB_GPU_REF_CTRL_DIVISOR0                                               0x1
+
+		000 = IOPLL_TO_FPD; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_GPU_REF_CTRL_SRCSEL                                                 0x0
+
+		Clock active signal. Switch to 0 to disable the clock, which will stop clock for GPU (and both Pixel Processors).
+		PSU_CRF_APB_GPU_REF_CTRL_CLKACT                                                 0x1
+
+		Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
+		PSU_CRF_APB_GPU_REF_CTRL_PP0_CLKACT                                             0x1
+
+		Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
+		PSU_CRF_APB_GPU_REF_CTRL_PP1_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0084, 0x07003F07U ,0x07000100U)  
+		RegMask = (CRF_APB_GPU_REF_CTRL_DIVISOR0_MASK | CRF_APB_GPU_REF_CTRL_SRCSEL_MASK | CRF_APB_GPU_REF_CTRL_CLKACT_MASK | CRF_APB_GPU_REF_CTRL_PP0_CLKACT_MASK | CRF_APB_GPU_REF_CTRL_PP1_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_GPU_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_GPU_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_GPU_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRF_APB_GPU_REF_CTRL_PP0_CLKACT_SHIFT
+			| 0x00000001U << CRF_APB_GPU_REF_CTRL_PP1_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_GPU_REF_CTRL_OFFSET ,0x07003F07U ,0x07000100U);
+	/*############################################################################################################################ */
+
+		/*Register : GDMA_REF_CTRL @ 0XFD1A00B8

+
+		6 bit divider
+		PSU_CRF_APB_GDMA_REF_CTRL_DIVISOR0                                              0x2
+
+		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_GDMA_REF_CTRL_SRCSEL                                                0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_GDMA_REF_CTRL_CLKACT                                                0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00B8, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_GDMA_REF_CTRL_DIVISOR0_MASK | CRF_APB_GDMA_REF_CTRL_SRCSEL_MASK | CRF_APB_GDMA_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_GDMA_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_GDMA_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_GDMA_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_GDMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DPDMA_REF_CTRL @ 0XFD1A00BC

+
+		6 bit divider
+		PSU_CRF_APB_DPDMA_REF_CTRL_DIVISOR0                                             0x2
+
+		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DPDMA_REF_CTRL_SRCSEL                                               0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DPDMA_REF_CTRL_CLKACT                                               0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00BC, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_DPDMA_REF_CTRL_DIVISOR0_MASK | CRF_APB_DPDMA_REF_CTRL_SRCSEL_MASK | CRF_APB_DPDMA_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DPDMA_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DPDMA_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DPDMA_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPDMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : TOPSW_MAIN_CTRL @ 0XFD1A00C0

+
+		6 bit divider
+		PSU_CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0                                            0x2
+
+		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_TOPSW_MAIN_CTRL_SRCSEL                                              0x2
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_TOPSW_MAIN_CTRL_CLKACT                                              0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00C0, 0x01003F07U ,0x01000202U)  
+		RegMask = (CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_MASK | CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_MASK | CRF_APB_TOPSW_MAIN_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_TOPSW_MAIN_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_TOPSW_MAIN_CTRL_OFFSET ,0x01003F07U ,0x01000202U);
+	/*############################################################################################################################ */
+
+		/*Register : TOPSW_LSBUS_CTRL @ 0XFD1A00C4

+
+		6 bit divider
+		PSU_CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0                                           0x5
+
+		000 = APLL; 010 = IOPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL                                             0x2
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_TOPSW_LSBUS_CTRL_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00C4, 0x01003F07U ,0x01000502U)  
+		RegMask = (CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_MASK | CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_MASK | CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000005U << CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_TOPSW_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000502U);
+	/*############################################################################################################################ */
+
+		/*Register : GTGREF0_REF_CTRL @ 0XFD1A00C8

+
+		6 bit divider
+		PSU_CRF_APB_GTGREF0_REF_CTRL_DIVISOR0                                           0x4
+
+		000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_GTGREF0_REF_CTRL_SRCSEL                                             0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_GTGREF0_REF_CTRL_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00C8, 0x01003F07U ,0x01000400U)  
+		RegMask = (CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK | CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK | CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000004U << CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_GTGREF0_REF_CTRL_OFFSET ,0x01003F07U ,0x01000400U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_TSTMP_CTRL @ 0XFD1A00F8

+
+		6 bit divider
+		PSU_CRF_APB_DBG_TSTMP_CTRL_DIVISOR0                                             0x2
+
+		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DBG_TSTMP_CTRL_SRCSEL                                               0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00F8, 0x00003F07U ,0x00000200U)  
+		RegMask = (CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_MASK | CRF_APB_DBG_TSTMP_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DBG_TSTMP_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DBG_TSTMP_CTRL_OFFSET ,0x00003F07U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : IOU_TTC_APB_CLK @ 0XFF180380

+
+		00" = Select the APB switch clock for the APB interface of TTC0'01" = Select the PLL ref clock for the APB interface of TTC0'
+		0" = Select the R5 clock for the APB interface of TTC0
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL                                           0
+
+		00" = Select the APB switch clock for the APB interface of TTC1'01" = Select the PLL ref clock for the APB interface of TTC1'
+		0" = Select the R5 clock for the APB interface of TTC1
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL                                           0
+
+		00" = Select the APB switch clock for the APB interface of TTC2'01" = Select the PLL ref clock for the APB interface of TTC2'
+		0" = Select the R5 clock for the APB interface of TTC2
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL                                           0
+
+		00" = Select the APB switch clock for the APB interface of TTC3'01" = Select the PLL ref clock for the APB interface of TTC3'
+		0" = Select the R5 clock for the APB interface of TTC3
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL                                           0
+
+		TTC APB clock select
+		(OFFSET, MASK, VALUE)      (0XFF180380, 0x000000FFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_IOU_TTC_APB_CLK_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : WDT_CLK_SEL @ 0XFD610100

+
+		System watchdog timer clock source selection: 0: Internal APB clock 1: External (PL clock via EMIO or Pinout clock via MIO)
+		PSU_FPD_SLCR_WDT_CLK_SEL_SELECT                                                 0
+
+		SWDT clock source select
+		(OFFSET, MASK, VALUE)      (0XFD610100, 0x00000001U ,0x00000000U)  
+		RegMask = (FPD_SLCR_WDT_CLK_SEL_SELECT_MASK |  0 );
+
+		RegVal = ((0x00000000U << FPD_SLCR_WDT_CLK_SEL_SELECT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (FPD_SLCR_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : WDT_CLK_SEL @ 0XFF180300

+
+		System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock from PL via EMIO, or from pinout 
+		ia MIO
+		PSU_IOU_SLCR_WDT_CLK_SEL_SELECT                                                 0
+
+		SWDT clock source select
+		(OFFSET, MASK, VALUE)      (0XFF180300, 0x00000001U ,0x00000000U)  
+		RegMask = (IOU_SLCR_WDT_CLK_SEL_SELECT_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_WDT_CLK_SEL_SELECT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : CSUPMU_WDT_CLK_SEL @ 0XFF410050

+
+		System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock pss_ref_clk
+		PSU_LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT                                          0
+
+		SWDT clock source select
+		(OFFSET, MASK, VALUE)      (0XFF410050, 0x00000001U ,0x00000000U)  
+		RegMask = (LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_MASK |  0 );
+
+		RegVal = ((0x00000000U << LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_ddr_init_data() {
+		// : DDR INITIALIZATION
+		// : DDR CONTROLLER RESET
+		/*Register : RST_DDR_SS @ 0XFD1A0108

+
+		DDR block level reset inside of the DDR Sub System
+		PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X1
+
+		DDR sub system block level reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_RST_DDR_SS_DDR_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_DDR_SS_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MSTR @ 0XFD070000

+
+		Indicates the configuration of the device used in the system. - 00 - x4 device - 01 - x8 device - 10 - x16 device - 11 - x32 
+		evice
+		PSU_DDRC_MSTR_DEVICE_CONFIG                                                     0x1
+
+		Choose which registers are used. - 0 - Original registers - 1 - Shadow registers
+		PSU_DDRC_MSTR_FREQUENCY_MODE                                                    0x0
+
+		Only present for multi-rank configurations. Each bit represents one rank. For two-rank configurations, only bits[25:24] are p
+		esent. - 1 - populated - 0 - unpopulated LSB is the lowest rank number. For 2 ranks following combinations are legal: - 01 - 
+		ne rank - 11 - Two ranks - Others - Reserved. For 4 ranks following combinations are legal: - 0001 - One rank - 0011 - Two ra
+		ks - 1111 - Four ranks
+		PSU_DDRC_MSTR_ACTIVE_RANKS                                                      0x1
+
+		SDRAM burst length used: - 0001 - Burst length of 2 (only supported for mDDR) - 0010 - Burst length of 4 - 0100 - Burst lengt
+		 of 8 - 1000 - Burst length of 16 (only supported for mDDR, LPDDR2, and LPDDR4) All other values are reserved. This controls 
+		he burst size used to access the SDRAM. This must match the burst length mode register setting in the SDRAM. (For BC4/8 on-th
+		-fly mode of DDR3 and DDR4, set this field to 0x0100) Burst length of 2 is not supported with AXI ports when MEMC_BURST_LENGT
+		 is 8. Burst length of 2 is only supported with MEMC_FREQ_RATIO = 1
+		PSU_DDRC_MSTR_BURST_RDWR                                                        0x4
+
+		Set to 1 when the uMCTL2 and DRAM has to be put in DLL-off mode for low frequency operation. Set to 0 to put uMCTL2 and DRAM 
+		n DLL-on mode for normal frequency operation. If DDR4 CRC/parity retry is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), d
+		l_off_mode is not supported, and this bit must be set to '0'.
+		PSU_DDRC_MSTR_DLL_OFF_MODE                                                      0x0
+
+		Selects proportion of DQ bus width that is used by the SDRAM - 00 - Full DQ bus width to SDRAM - 01 - Half DQ bus width to SD
+		AM - 10 - Quarter DQ bus width to SDRAM - 11 - Reserved. Note that half bus width mode is only supported when the SDRAM bus w
+		dth is a multiple of 16, and quarter bus width mode is only supported when the SDRAM bus width is a multiple of 32 and the co
+		figuration parameter MEMC_QBUS_SUPPORT is set. Bus width refers to DQ bus width (excluding any ECC width).
+		PSU_DDRC_MSTR_DATA_BUS_WIDTH                                                    0x0
+
+		1 indicates put the DRAM in geardown mode (2N) and 0 indicates put the DRAM in normal mode (1N). This register can be changed
+		 only when the Controller is in self-refresh mode. This signal must be set the same value as MR3 bit A3. Note: Geardown mode 
+		s not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set
+		PSU_DDRC_MSTR_GEARDOWN_MODE                                                     0x0
+
+		If 1, then uMCTL2 uses 2T timing. Otherwise, uses 1T timing. In 2T timing, all command signals (except chip select) are held 
+		or 2 clocks on the SDRAM bus. Chip select is asserted on the second cycle of the command Note: 2T timing is not supported in 
+		PDDR2/LPDDR3/LPDDR4 mode Note: 2T timing is not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set Note: 2T ti
+		ing is not supported in DDR4 geardown mode.
+		PSU_DDRC_MSTR_EN_2T_TIMING_MODE                                                 0x0
+
+		When set, enable burst-chop in DDR3/DDR4. Burst Chop for Reads is exercised only in HIF configurations (UMCTL2_INCL_ARB not s
+		t) and if in full bus width mode (MSTR.data_bus_width = 00). Burst Chop for Writes is exercised only if Partial Writes enable
+		 (UMCTL2_PARTIAL_WR=1) and if CRC is disabled (CRCPARCTL1.crc_enable = 0). If DDR4 CRC/parity retry is enabled (CRCPARCTL1.cr
+		_parity_retry_enable = 1), burst chop is not supported, and this bit must be set to '0'
+		PSU_DDRC_MSTR_BURSTCHOP                                                         0x0
+
+		Select LPDDR4 SDRAM - 1 - LPDDR4 SDRAM device in use. - 0 - non-LPDDR4 device in use Present only in designs configured to su
+		port LPDDR4.
+		PSU_DDRC_MSTR_LPDDR4                                                            0x0
+
+		Select DDR4 SDRAM - 1 - DDR4 SDRAM device in use. - 0 - non-DDR4 device in use Present only in designs configured to support 
+		DR4.
+		PSU_DDRC_MSTR_DDR4                                                              0x1
+
+		Select LPDDR3 SDRAM - 1 - LPDDR3 SDRAM device in use. - 0 - non-LPDDR3 device in use Present only in designs configured to su
+		port LPDDR3.
+		PSU_DDRC_MSTR_LPDDR3                                                            0x0
+
+		Select LPDDR2 SDRAM - 1 - LPDDR2 SDRAM device in use. - 0 - non-LPDDR2 device in use Present only in designs configured to su
+		port LPDDR2.
+		PSU_DDRC_MSTR_LPDDR2                                                            0x0
+
+		Select DDR3 SDRAM - 1 - DDR3 SDRAM device in use - 0 - non-DDR3 SDRAM device in use Only present in designs that support DDR3
+		
+		PSU_DDRC_MSTR_DDR3                                                              0x0
+
+		Master Register
+		(OFFSET, MASK, VALUE)      (0XFD070000, 0xE30FBE3DU ,0x41040010U)  
+		RegMask = (DDRC_MSTR_DEVICE_CONFIG_MASK | DDRC_MSTR_FREQUENCY_MODE_MASK | DDRC_MSTR_ACTIVE_RANKS_MASK | DDRC_MSTR_BURST_RDWR_MASK | DDRC_MSTR_DLL_OFF_MODE_MASK | DDRC_MSTR_DATA_BUS_WIDTH_MASK | DDRC_MSTR_GEARDOWN_MODE_MASK | DDRC_MSTR_EN_2T_TIMING_MODE_MASK | DDRC_MSTR_BURSTCHOP_MASK | DDRC_MSTR_LPDDR4_MASK | DDRC_MSTR_DDR4_MASK | DDRC_MSTR_LPDDR3_MASK | DDRC_MSTR_LPDDR2_MASK | DDRC_MSTR_DDR3_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_MSTR_DEVICE_CONFIG_SHIFT
+			| 0x00000000U << DDRC_MSTR_FREQUENCY_MODE_SHIFT
+			| 0x00000001U << DDRC_MSTR_ACTIVE_RANKS_SHIFT
+			| 0x00000004U << DDRC_MSTR_BURST_RDWR_SHIFT
+			| 0x00000000U << DDRC_MSTR_DLL_OFF_MODE_SHIFT
+			| 0x00000000U << DDRC_MSTR_DATA_BUS_WIDTH_SHIFT
+			| 0x00000000U << DDRC_MSTR_GEARDOWN_MODE_SHIFT
+			| 0x00000000U << DDRC_MSTR_EN_2T_TIMING_MODE_SHIFT
+			| 0x00000000U << DDRC_MSTR_BURSTCHOP_SHIFT
+			| 0x00000000U << DDRC_MSTR_LPDDR4_SHIFT
+			| 0x00000001U << DDRC_MSTR_DDR4_SHIFT
+			| 0x00000000U << DDRC_MSTR_LPDDR3_SHIFT
+			| 0x00000000U << DDRC_MSTR_LPDDR2_SHIFT
+			| 0x00000000U << DDRC_MSTR_DDR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_MSTR_OFFSET ,0xE30FBE3DU ,0x41040010U);
+	/*############################################################################################################################ */
+
+		/*Register : MRCTRL0 @ 0XFD070010

+
+		Setting this register bit to 1 triggers a mode register read or write operation. When the MR operation is complete, the uMCTL
+		 automatically clears this bit. The other register fields of this register must be written in a separate APB transaction, bef
+		re setting this mr_wr bit. It is recommended NOT to set this signal if in Init, Deep power-down or MPSM operating modes.
+		PSU_DDRC_MRCTRL0_MR_WR                                                          0x0
+
+		Address of the mode register that is to be written to. - 0000 - MR0 - 0001 - MR1 - 0010 - MR2 - 0011 - MR3 - 0100 - MR4 - 010
+		 - MR5 - 0110 - MR6 - 0111 - MR7 Don't Care for LPDDR2/LPDDR3/LPDDR4 (see MRCTRL1.mr_data for mode register addressing in LPD
+		R2/LPDDR3/LPDDR4) This signal is also used for writing to control words of RDIMMs. In that case, it corresponds to the bank a
+		dress bits sent to the RDIMM In case of DDR4, the bit[3:2] corresponds to the bank group bits. Therefore, the bit[3] as well 
+		s the bit[2:0] must be set to an appropriate value which is considered both the Address Mirroring of UDIMMs/RDIMMs and the Ou
+		put Inversion of RDIMMs.
+		PSU_DDRC_MRCTRL0_MR_ADDR                                                        0x0
+
+		Controls which rank is accessed by MRCTRL0.mr_wr. Normally, it is desired to access all ranks, so all bits should be set to 1
+		 However, for multi-rank UDIMMs/RDIMMs which implement address mirroring, it may be necessary to access ranks individually. E
+		amples (assume uMCTL2 is configured for 4 ranks): - 0x1 - select rank 0 only - 0x2 - select rank 1 only - 0x5 - select ranks 
+		 and 2 - 0xA - select ranks 1 and 3 - 0xF - select ranks 0, 1, 2 and 3
+		PSU_DDRC_MRCTRL0_MR_RANK                                                        0x3
+
+		Indicates whether Software intervention is allowed via MRCTRL0/MRCTRL1 before automatic SDRAM initialization routine or not. 
+		or DDR4, this bit can be used to initialize the DDR4 RCD (MR7) before automatic SDRAM initialization. For LPDDR4, this bit ca
+		 be used to program additional mode registers before automatic SDRAM initialization if necessary. Note: This must be cleared 
+		o 0 after completing Software operation. Otherwise, SDRAM initialization routine will not re-start. - 0 - Software interventi
+		n is not allowed - 1 - Software intervention is allowed
+		PSU_DDRC_MRCTRL0_SW_INIT_INT                                                    0x0
+
+		Indicates whether the mode register operation is MRS in PDA mode or not - 0 - MRS - 1 - MRS in Per DRAM Addressability mode
+		PSU_DDRC_MRCTRL0_PDA_EN                                                         0x0
+
+		Indicates whether the mode register operation is MRS or WR/RD for MPR (only supported for DDR4) - 0 - MRS - 1 - WR/RD for MPR
+		PSU_DDRC_MRCTRL0_MPR_EN                                                         0x0
+
+		Indicates whether the mode register operation is read or write. Only used for LPDDR2/LPDDR3/LPDDR4/DDR4. - 0 - Write - 1 - Re
+		d
+		PSU_DDRC_MRCTRL0_MR_TYPE                                                        0x0
+
+		Mode Register Read/Write Control Register 0. Note: Do not enable more than one of the following fields simultaneously: - sw_i
+		it_int - pda_en - mpr_en
+		(OFFSET, MASK, VALUE)      (0XFD070010, 0x8000F03FU ,0x00000030U)  
+		RegMask = (DDRC_MRCTRL0_MR_WR_MASK | DDRC_MRCTRL0_MR_ADDR_MASK | DDRC_MRCTRL0_MR_RANK_MASK | DDRC_MRCTRL0_SW_INIT_INT_MASK | DDRC_MRCTRL0_PDA_EN_MASK | DDRC_MRCTRL0_MPR_EN_MASK | DDRC_MRCTRL0_MR_TYPE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_MRCTRL0_MR_WR_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_MR_ADDR_SHIFT
+			| 0x00000003U << DDRC_MRCTRL0_MR_RANK_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_SW_INIT_INT_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_PDA_EN_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_MPR_EN_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_MR_TYPE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_MRCTRL0_OFFSET ,0x8000F03FU ,0x00000030U);
+	/*############################################################################################################################ */
+
+		/*Register : DERATEEN @ 0XFD070020

+
+		Derate value of tRC for LPDDR4 - 0 - Derating uses +1. - 1 - Derating uses +2. - 2 - Derating uses +3. - 3 - Derating uses +4
+		 Present only in designs configured to support LPDDR4. The required number of cycles for derating can be determined by dividi
+		g 3.75ns by the core_ddrc_core_clk period, and rounding up the next integer.
+		PSU_DDRC_DERATEEN_RC_DERATE_VALUE                                               0x3
+
+		Derate byte Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 Indicates which byte of the MRR data is used f
+		r derating. The maximum valid value depends on MEMC_DRAM_TOTAL_DATA_WIDTH.
+		PSU_DDRC_DERATEEN_DERATE_BYTE                                                   0x0
+
+		Derate value - 0 - Derating uses +1. - 1 - Derating uses +2. Present only in designs configured to support LPDDR2/LPDDR3/LPDD
+		4 Set to 0 for all LPDDR2 speed grades as derating value of +1.875 ns is less than a core_ddrc_core_clk period. Can be 0 or 1
+		for LPDDR3/LPDDR4, depending if +1.875 ns is less than a core_ddrc_core_clk period or not.
+		PSU_DDRC_DERATEEN_DERATE_VALUE                                                  0x0
+
+		Enables derating - 0 - Timing parameter derating is disabled - 1 - Timing parameter derating is enabled using MR4 read value.
+		Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 This field must be set to '0' for non-LPDDR2/LPDDR3/LPDDR4
+		mode.
+		PSU_DDRC_DERATEEN_DERATE_ENABLE                                                 0x0
+
+		Temperature Derate Enable Register
+		(OFFSET, MASK, VALUE)      (0XFD070020, 0x000003F3U ,0x00000300U)  
+		RegMask = (DDRC_DERATEEN_RC_DERATE_VALUE_MASK | DDRC_DERATEEN_DERATE_BYTE_MASK | DDRC_DERATEEN_DERATE_VALUE_MASK | DDRC_DERATEEN_DERATE_ENABLE_MASK |  0 );
+
+		RegVal = ((0x00000003U << DDRC_DERATEEN_RC_DERATE_VALUE_SHIFT
+			| 0x00000000U << DDRC_DERATEEN_DERATE_BYTE_SHIFT
+			| 0x00000000U << DDRC_DERATEEN_DERATE_VALUE_SHIFT
+			| 0x00000000U << DDRC_DERATEEN_DERATE_ENABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DERATEEN_OFFSET ,0x000003F3U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		/*Register : DERATEINT @ 0XFD070024

+
+		Interval between two MR4 reads, used to derate the timing parameters. Present only in designs configured to support LPDDR2/LP
+		DR3/LPDDR4. This register must not be set to zero
+		PSU_DDRC_DERATEINT_MR4_READ_INTERVAL                                            0x800000
+
+		Temperature Derate Interval Register
+		(OFFSET, MASK, VALUE)      (0XFD070024, 0xFFFFFFFFU ,0x00800000U)  
+		RegMask = (DDRC_DERATEINT_MR4_READ_INTERVAL_MASK |  0 );
+
+		RegVal = ((0x00800000U << DDRC_DERATEINT_MR4_READ_INTERVAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DERATEINT_OFFSET ,0xFFFFFFFFU ,0x00800000U);
+	/*############################################################################################################################ */
+
+		/*Register : PWRCTL @ 0XFD070030

+
+		Self refresh state is an intermediate state to enter to Self refresh power down state or exit Self refresh power down state f
+		r LPDDR4. This register controls transition from the Self refresh state. - 1 - Prohibit transition from Self refresh state - 
+		 - Allow transition from Self refresh state
+		PSU_DDRC_PWRCTL_STAY_IN_SELFREF                                                 0x0
+
+		A value of 1 to this register causes system to move to Self Refresh state immediately, as long as it is not in INIT or DPD/MP
+		M operating_mode. This is referred to as Software Entry/Exit to Self Refresh. - 1 - Software Entry to Self Refresh - 0 - Soft
+		are Exit from Self Refresh
+		PSU_DDRC_PWRCTL_SELFREF_SW                                                      0x0
+
+		When this is 1, the uMCTL2 puts the SDRAM into maximum power saving mode when the transaction store is empty. This register m
+		st be reset to '0' to bring uMCTL2 out of maximum power saving mode. Present only in designs configured to support DDR4. For 
+		on-DDR4, this register should not be set to 1. Note that MPSM is not supported when using a DWC DDR PHY, if the PHY parameter
+		DWC_AC_CS_USE is disabled, as the MPSM exit sequence requires the chip-select signal to toggle. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRCTL_MPSM_EN                                                         0x0
+
+		Enable the assertion of dfi_dram_clk_disable whenever a clock is not required by the SDRAM. If set to 0, dfi_dram_clk_disable
+		is never asserted. Assertion of dfi_dram_clk_disable is as follows: In DDR2/DDR3, can only be asserted in Self Refresh. In DD
+		4, can be asserted in following: - in Self Refresh. - in Maximum Power Saving Mode In mDDR/LPDDR2/LPDDR3, can be asserted in 
+		ollowing: - in Self Refresh - in Power Down - in Deep Power Down - during Normal operation (Clock Stop) In LPDDR4, can be ass
+		rted in following: - in Self Refresh Power Down - in Power Down - during Normal operation (Clock Stop)
+		PSU_DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE                                         0x0
+
+		When this is 1, uMCTL2 puts the SDRAM into deep power-down mode when the transaction store is empty. This register must be re
+		et to '0' to bring uMCTL2 out of deep power-down mode. Controller performs automatic SDRAM initialization on deep power-down 
+		xit. Present only in designs configured to support mDDR or LPDDR2 or LPDDR3. For non-mDDR/non-LPDDR2/non-LPDDR3, this registe
+		 should not be set to 1. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRCTL_DEEPPOWERDOWN_EN                                                0x0
+
+		If true then the uMCTL2 goes into power-down after a programmable number of cycles 'maximum idle clocks before power down' (P
+		RTMG.powerdown_to_x32). This register bit may be re-programmed during the course of normal operation.
+		PSU_DDRC_PWRCTL_POWERDOWN_EN                                                    0x0
+
+		If true then the uMCTL2 puts the SDRAM into Self Refresh after a programmable number of cycles 'maximum idle clocks before Se
+		f Refresh (PWRTMG.selfref_to_x32)'. This register bit may be re-programmed during the course of normal operation.
+		PSU_DDRC_PWRCTL_SELFREF_EN                                                      0x0
+
+		Low Power Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070030, 0x0000007FU ,0x00000000U)  
+		RegMask = (DDRC_PWRCTL_STAY_IN_SELFREF_MASK | DDRC_PWRCTL_SELFREF_SW_MASK | DDRC_PWRCTL_MPSM_EN_MASK | DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_MASK | DDRC_PWRCTL_DEEPPOWERDOWN_EN_MASK | DDRC_PWRCTL_POWERDOWN_EN_MASK | DDRC_PWRCTL_SELFREF_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PWRCTL_STAY_IN_SELFREF_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_SELFREF_SW_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_MPSM_EN_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_DEEPPOWERDOWN_EN_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_POWERDOWN_EN_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_SELFREF_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PWRCTL_OFFSET ,0x0000007FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PWRTMG @ 0XFD070034

+
+		After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into Self Refresh. This must be enabled in 
+		he PWRCTL.selfref_en. Unit: Multiples of 32 clocks. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRTMG_SELFREF_TO_X32                                                  0x40
+
+		Minimum deep power-down time. For mDDR, value from the JEDEC specification is 0 as mDDR exits from deep power-down mode immed
+		ately after PWRCTL.deeppowerdown_en is de-asserted. For LPDDR2/LPDDR3, value from the JEDEC specification is 500us. Unit: Mul
+		iples of 4096 clocks. Present only in designs configured to support mDDR, LPDDR2 or LPDDR3. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRTMG_T_DPD_X4096                                                     0x84
+
+		After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into power-down. This must be enabled in th
+		 PWRCTL.powerdown_en. Unit: Multiples of 32 clocks FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRTMG_POWERDOWN_TO_X32                                                0x10
+
+		Low Power Timing Register
+		(OFFSET, MASK, VALUE)      (0XFD070034, 0x00FFFF1FU ,0x00408410U)  
+		RegMask = (DDRC_PWRTMG_SELFREF_TO_X32_MASK | DDRC_PWRTMG_T_DPD_X4096_MASK | DDRC_PWRTMG_POWERDOWN_TO_X32_MASK |  0 );
+
+		RegVal = ((0x00000040U << DDRC_PWRTMG_SELFREF_TO_X32_SHIFT
+			| 0x00000084U << DDRC_PWRTMG_T_DPD_X4096_SHIFT
+			| 0x00000010U << DDRC_PWRTMG_POWERDOWN_TO_X32_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PWRTMG_OFFSET ,0x00FFFF1FU ,0x00408410U);
+	/*############################################################################################################################ */
+
+		/*Register : RFSHCTL0 @ 0XFD070050

+
+		Threshold value in number of clock cycles before the critical refresh or page timer expires. A critical refresh is to be issu
+		d before this threshold is reached. It is recommended that this not be changed from the default value, currently shown as 0x2
+		 It must always be less than internally used t_rfc_nom_x32. Note that, in LPDDR2/LPDDR3/LPDDR4, internally used t_rfc_nom_x32
+		may be equal to RFSHTMG.t_rfc_nom_x32>>2 if derating is enabled (DERATEEN.derate_enable=1). Otherwise, internally used t_rfc_
+		om_x32 will be equal to RFSHTMG.t_rfc_nom_x32. Unit: Multiples of 32 clocks.
+		PSU_DDRC_RFSHCTL0_REFRESH_MARGIN                                                0x2
+
+		If the refresh timer (tRFCnom, also known as tREFI) has expired at least once, but it has not expired (RFSHCTL0.refresh_burst
+		1) times yet, then a speculative refresh may be performed. A speculative refresh is a refresh performed at a time when refres
+		 would be useful, but before it is absolutely required. When the SDRAM bus is idle for a period of time determined by this RF
+		HCTL0.refresh_to_x32 and the refresh timer has expired at least once since the last refresh, then a speculative refresh is pe
+		formed. Speculative refreshes continues successively until there are no refreshes pending or until new reads or writes are is
+		ued to the uMCTL2. FOR PERFORMANCE ONLY.
+		PSU_DDRC_RFSHCTL0_REFRESH_TO_X32                                                0x10
+
+		The programmed value + 1 is the number of refresh timeouts that is allowed to accumulate before traffic is blocked and the re
+		reshes are forced to execute. Closing pages to perform a refresh is a one-time penalty that must be paid for each group of re
+		reshes. Therefore, performing refreshes in a burst reduces the per-refresh penalty of these page closings. Higher numbers for
+		RFSHCTL.refresh_burst slightly increases utilization; lower numbers decreases the worst-case latency associated with refreshe
+		. - 0 - single refresh - 1 - burst-of-2 refresh - 7 - burst-of-8 refresh For information on burst refresh feature refer to se
+		tion 3.9 of DDR2 JEDEC specification - JESD79-2F.pdf. For DDR2/3, the refresh is always per-rank and not per-bank. The rank r
+		fresh can be accumulated over 8*tREFI cycles using the burst refresh feature. In DDR4 mode, according to Fine Granularity fea
+		ure, 8 refreshes can be postponed in 1X mode, 16 refreshes in 2X mode and 32 refreshes in 4X mode. If using PHY-initiated upd
+		tes, care must be taken in the setting of RFSHCTL0.refresh_burst, to ensure that tRFCmax is not violated due to a PHY-initiat
+		d update occurring shortly before a refresh burst was due. In this situation, the refresh burst will be delayed until the PHY
+		initiated update is complete.
+		PSU_DDRC_RFSHCTL0_REFRESH_BURST                                                 0x0
+
+		- 1 - Per bank refresh; - 0 - All bank refresh. Per bank refresh allows traffic to flow to other banks. Per bank refresh is n
+		t supported by all LPDDR2 devices but should be supported by all LPDDR3/LPDDR4 devices. Present only in designs configured to
+		support LPDDR2/LPDDR3/LPDDR4
+		PSU_DDRC_RFSHCTL0_PER_BANK_REFRESH                                              0x0
+
+		Refresh Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070050, 0x00F1F1F4U ,0x00210000U)  
+		RegMask = (DDRC_RFSHCTL0_REFRESH_MARGIN_MASK | DDRC_RFSHCTL0_REFRESH_TO_X32_MASK | DDRC_RFSHCTL0_REFRESH_BURST_MASK | DDRC_RFSHCTL0_PER_BANK_REFRESH_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_RFSHCTL0_REFRESH_MARGIN_SHIFT
+			| 0x00000010U << DDRC_RFSHCTL0_REFRESH_TO_X32_SHIFT
+			| 0x00000000U << DDRC_RFSHCTL0_REFRESH_BURST_SHIFT
+			| 0x00000000U << DDRC_RFSHCTL0_PER_BANK_REFRESH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RFSHCTL0_OFFSET ,0x00F1F1F4U ,0x00210000U);
+	/*############################################################################################################################ */
+
+		/*Register : RFSHCTL3 @ 0XFD070060

+
+		Fine Granularity Refresh Mode - 000 - Fixed 1x (Normal mode) - 001 - Fixed 2x - 010 - Fixed 4x - 101 - Enable on the fly 2x (
+		ot supported) - 110 - Enable on the fly 4x (not supported) - Everything else - reserved Note: The on-the-fly modes is not sup
+		orted in this version of the uMCTL2. Note: This must be set up while the Controller is in reset or while the Controller is in
+		self-refresh mode. Changing this during normal operation is not allowed. Making this a dynamic register will be supported in 
+		uture version of the uMCTL2.
+		PSU_DDRC_RFSHCTL3_REFRESH_MODE                                                  0x0
+
+		Toggle this signal (either from 0 to 1 or from 1 to 0) to indicate that the refresh register(s) have been updated. The value 
+		s automatically updated when exiting reset, so it does not need to be toggled initially.
+		PSU_DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL                                          0x0
+
+		When '1', disable auto-refresh generated by the uMCTL2. When auto-refresh is disabled, the SoC core must generate refreshes u
+		ing the registers reg_ddrc_rank0_refresh, reg_ddrc_rank1_refresh, reg_ddrc_rank2_refresh and reg_ddrc_rank3_refresh. When dis
+		auto_refresh transitions from 0 to 1, any pending refreshes are immediately scheduled by the uMCTL2. If DDR4 CRC/parity retry
+		is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), disable auto-refresh is not supported, and this bit must be set to '0'. 
+		his register field is changeable on the fly.
+		PSU_DDRC_RFSHCTL3_DIS_AUTO_REFRESH                                              0x1
+
+		Refresh Control Register 3
+		(OFFSET, MASK, VALUE)      (0XFD070060, 0x00000073U ,0x00000001U)  
+		RegMask = (DDRC_RFSHCTL3_REFRESH_MODE_MASK | DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_MASK | DDRC_RFSHCTL3_DIS_AUTO_REFRESH_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_RFSHCTL3_REFRESH_MODE_SHIFT
+			| 0x00000000U << DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_SHIFT
+			| 0x00000001U << DDRC_RFSHCTL3_DIS_AUTO_REFRESH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RFSHCTL3_OFFSET ,0x00000073U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : RFSHTMG @ 0XFD070064

+
+		tREFI: Average time interval between refreshes per rank (Specification: 7.8us for DDR2, DDR3 and DDR4. See JEDEC specificatio
+		 for mDDR, LPDDR2, LPDDR3 and LPDDR4). For LPDDR2/LPDDR3/LPDDR4: - if using all-bank refreshes (RFSHCTL0.per_bank_refresh = 0
+		, this register should be set to tREFIab - if using per-bank refreshes (RFSHCTL0.per_bank_refresh = 1), this register should 
+		e set to tREFIpb For configurations with MEMC_FREQ_RATIO=2, program this to (tREFI/2), no rounding up. In DDR4 mode, tREFI va
+		ue is different depending on the refresh mode. The user should program the appropriate value from the spec based on the value
+		programmed in the refresh mode register. Note that RFSHTMG.t_rfc_nom_x32 * 32 must be greater than RFSHTMG.t_rfc_min, and RFS
+		TMG.t_rfc_nom_x32 must be greater than 0x1. Unit: Multiples of 32 clocks.
+		PSU_DDRC_RFSHTMG_T_RFC_NOM_X32                                                  0x82
+
+		Used only when LPDDR3 memory type is connected. Should only be changed when uMCTL2 is in reset. Specifies whether to use the 
+		REFBW parameter (required by some LPDDR3 devices which comply with earlier versions of the LPDDR3 JEDEC specification) or not
+		 - 0 - tREFBW parameter not used - 1 - tREFBW parameter used
+		PSU_DDRC_RFSHTMG_LPDDR3_TREFBW_EN                                               0x1
+
+		tRFC (min): Minimum time from refresh to refresh or activate. For MEMC_FREQ_RATIO=1 configurations, t_rfc_min should be set t
+		 RoundUp(tRFCmin/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rfc_min should be set to RoundUp(RoundUp(tRFCmin/tCK)/2). In L
+		DDR2/LPDDR3/LPDDR4 mode: - if using all-bank refreshes, the tRFCmin value in the above equations is equal to tRFCab - if usin
+		 per-bank refreshes, the tRFCmin value in the above equations is equal to tRFCpb In DDR4 mode, the tRFCmin value in the above
+		equations is different depending on the refresh mode (fixed 1X,2X,4X) and the device density. The user should program the app
+		opriate value from the spec based on the 'refresh_mode' and the device density that is used. Unit: Clocks.
+		PSU_DDRC_RFSHTMG_T_RFC_MIN                                                      0x8b
+
+		Refresh Timing Register
+		(OFFSET, MASK, VALUE)      (0XFD070064, 0x0FFF83FFU ,0x0082808BU)  
+		RegMask = (DDRC_RFSHTMG_T_RFC_NOM_X32_MASK | DDRC_RFSHTMG_LPDDR3_TREFBW_EN_MASK | DDRC_RFSHTMG_T_RFC_MIN_MASK |  0 );
+
+		RegVal = ((0x00000082U << DDRC_RFSHTMG_T_RFC_NOM_X32_SHIFT
+			| 0x00000001U << DDRC_RFSHTMG_LPDDR3_TREFBW_EN_SHIFT
+			| 0x0000008BU << DDRC_RFSHTMG_T_RFC_MIN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RFSHTMG_OFFSET ,0x0FFF83FFU ,0x0082808BU);
+	/*############################################################################################################################ */
+
+		/*Register : ECCCFG0 @ 0XFD070070

+
+		Disable ECC scrubs. Valid only when ECCCFG0.ecc_mode = 3'b100 and MEMC_USE_RMW is defined
+		PSU_DDRC_ECCCFG0_DIS_SCRUB                                                      0x1
+
+		ECC mode indicator - 000 - ECC disabled - 100 - ECC enabled - SEC/DED over 1 beat - all other settings are reserved for futur
+		 use
+		PSU_DDRC_ECCCFG0_ECC_MODE                                                       0x0
+
+		ECC Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070070, 0x00000017U ,0x00000010U)  
+		RegMask = (DDRC_ECCCFG0_DIS_SCRUB_MASK | DDRC_ECCCFG0_ECC_MODE_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_ECCCFG0_DIS_SCRUB_SHIFT
+			| 0x00000000U << DDRC_ECCCFG0_ECC_MODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ECCCFG0_OFFSET ,0x00000017U ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : ECCCFG1 @ 0XFD070074

+
+		Selects whether to poison 1 or 2 bits - if 0 -> 2-bit (uncorrectable) data poisoning, if 1 -> 1-bit (correctable) data poison
+		ng, if ECCCFG1.data_poison_en=1
+		PSU_DDRC_ECCCFG1_DATA_POISON_BIT                                                0x0
+
+		Enable ECC data poisoning - introduces ECC errors on writes to address specified by the ECCPOISONADDR0/1 registers
+		PSU_DDRC_ECCCFG1_DATA_POISON_EN                                                 0x0
+
+		ECC Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070074, 0x00000003U ,0x00000000U)  
+		RegMask = (DDRC_ECCCFG1_DATA_POISON_BIT_MASK | DDRC_ECCCFG1_DATA_POISON_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ECCCFG1_DATA_POISON_BIT_SHIFT
+			| 0x00000000U << DDRC_ECCCFG1_DATA_POISON_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ECCCFG1_OFFSET ,0x00000003U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : CRCPARCTL1 @ 0XFD0700C4

+
+		The maximum number of DFI PHY clock cycles allowed from the assertion of the dfi_rddata_en signal to the assertion of each of
+		the corresponding bits of the dfi_rddata_valid signal. This corresponds to the DFI timing parameter tphy_rdlat. Refer to PHY 
+		pecification for correct value. This value it only used for detecting read data timeout when DDR4 retry is enabled by CRCPARC
+		L1.crc_parity_retry_enable=1. Maximum supported value: - 1:1 Frequency mode : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_
+		dlat < 'd114 - 1:2 Frequency mode ANDAND DFITMG0.dfi_rddata_use_sdr == 1 : CRCPARCTL1.dfi_t_phy_rdlat < 64 - 1:2 Frequency mo
+		e ANDAND DFITMG0.dfi_rddata_use_sdr == 0 : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_rdlat < 'd114 Unit: DFI Clocks
+		PSU_DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT                                             0x10
+
+		After a Parity or CRC error is flagged on dfi_alert_n signal, the software has an option to read the mode registers in the DR
+		M before the hardware begins the retry process - 1: Wait for software to read/write the mode registers before hardware begins
+		the retry. After software is done with its operations, it will clear the alert interrupt register bit - 0: Hardware can begin
+		the retry right away after the dfi_alert_n pulse goes away. The value on this register is valid only when retry is enabled (P
+		RCTRL.crc_parity_retry_enable = 1) If this register is set to 1 and if the software doesn't clear the interrupt register afte
+		 handling the parity/CRC error, then the hardware will not begin the retry process and the system will hang. In the case of P
+		rity/CRC error, there are two possibilities when the software doesn't reset MR5[4] to 0. - (i) If 'Persistent parity' mode re
+		ister bit is NOT set: the commands sent during retry and normal operation are executed without parity checking. The value in 
+		he Parity error log register MPR Page 1 is valid. - (ii) If 'Persistent parity' mode register bit is SET: Parity checking is 
+		one for commands sent during retry and normal operation. If multiple errors occur before MR5[4] is cleared, the error log in 
+		PR Page 1 should be treated as 'Don't care'.
+		PSU_DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW                                           0x1
+
+		- 1: Enable command retry mechanism in case of C/A Parity or CRC error - 0: Disable command retry mechanism when C/A Parity o
+		 CRC features are enabled. Note that retry functionality is not supported if burst chop is enabled (MSTR.burstchop = 1) and/o
+		 disable auto-refresh is enabled (RFSHCTL3.dis_auto_refresh = 1)
+		PSU_DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE                                     0x0
+
+		CRC Calculation setting register - 1: CRC includes DM signal - 0: CRC not includes DM signal Present only in designs configur
+		d to support DDR4.
+		PSU_DDRC_CRCPARCTL1_CRC_INC_DM                                                  0x0
+
+		CRC enable Register - 1: Enable generation of CRC - 0: Disable generation of CRC The setting of this register should match th
+		 CRC mode register setting in the DRAM.
+		PSU_DDRC_CRCPARCTL1_CRC_ENABLE                                                  0x0
+
+		C/A Parity enable register - 1: Enable generation of C/A parity and detection of C/A parity error - 0: Disable generation of 
+		/A parity and disable detection of C/A parity error If RCD's parity error detection or SDRAM's parity detection is enabled, t
+		is register should be 1.
+		PSU_DDRC_CRCPARCTL1_PARITY_ENABLE                                               0x0
+
+		CRC Parity Control Register1
+		(OFFSET, MASK, VALUE)      (0XFD0700C4, 0x3F000391U ,0x10000200U)  
+		RegMask = (DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_MASK | DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_MASK | DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_MASK | DDRC_CRCPARCTL1_CRC_INC_DM_MASK | DDRC_CRCPARCTL1_CRC_ENABLE_MASK | DDRC_CRCPARCTL1_PARITY_ENABLE_MASK |  0 );
+
+		RegVal = ((0x00000010U << DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_SHIFT
+			| 0x00000001U << DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_CRC_INC_DM_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_CRC_ENABLE_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_PARITY_ENABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_CRCPARCTL1_OFFSET ,0x3F000391U ,0x10000200U);
+	/*############################################################################################################################ */
+
+		/*Register : CRCPARCTL2 @ 0XFD0700C8

+
+		Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a parity error occurs. Recommended values
+		 - tPAR_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tPAR_ALERT_PW.MAX/2 and round up to next inte
+		er value. Values of 0, 1 and 2 are illegal. This value must be greater than CRCPARCTL2.t_crc_alert_pw_max.
+		PSU_DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX                                          0x40
+
+		Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a CRC error occurs. Recommended values: -
+		tCRC_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tCRC_ALERT_PW.MAX/2 and round up to next integer
+		value. Values of 0, 1 and 2 are illegal. This value must be less than CRCPARCTL2.t_par_alert_pw_max.
+		PSU_DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX                                          0x5
+
+		Indicates the maximum duration in number of DRAM clock cycles for which a command should be held in the Command Retry FIFO be
+		ore it is popped out. Every location in the Command Retry FIFO has an associated down counting timer that will use this regis
+		er as the start value. The down counting starts when a command is loaded into the FIFO. The timer counts down every 4 DRAM cy
+		les. When the counter reaches zero, the entry is popped from the FIFO. All the counters are frozen, if a C/A Parity or CRC er
+		or occurs before the counter reaches zero. The counter is reset to 0, after all the commands in the FIFO are retried. Recomme
+		ded(minimum) values: - Only C/A Parity is enabled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + tPAR_ALERT_ON
+		max + tPAR_UNKNOWN + PHY Alert Latency(DRAM CLK) + board delay) / 4) + 2 - Both C/A Parity and CRC is enabled/ Only CRC is en
+		bled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + WL + 5(BL10)+ tCRC_ALERT.max + PHY Alert Latency(DRAM CLK)
+		+ board delay) / 4) + 2 Note 1: All value (e.g. tPAR_ALERT_ON) should be in terms of DRAM Clock and round up Note 2: Board de
+		ay(Command/Alert_n) should be considered. Note 3: Use the worst case(longer) value for PHY Latencies/Board delay Note 4: The 
+		ecommended values are minimum value to be set. For mode detail, See 'Calculation of FIFO Depth' section. Max value can be set
+		to this register is defined below: - MEMC_BURST_LENGTH == 16 Full bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-
+		 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Half bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_D
+		PTH-4 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-6 Quarter bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CM
+		_FIFO_DEPTH-8 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-12 - MEMC_BURST_LENGTH != 16 Full bus Mode (C
+		C=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-1 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mo
+		e (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Quarte
+		 bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-4 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEP
+		H-6 Values of 0, 1 and 2 are illegal.
+		PSU_DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4                                0x1f
+
+		CRC Parity Control Register2
+		(OFFSET, MASK, VALUE)      (0XFD0700C8, 0x01FF1F3FU ,0x0040051FU)  
+		RegMask = (DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_MASK | DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_MASK | DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_MASK |  0 );
+
+		RegVal = ((0x00000040U << DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_SHIFT
+			| 0x00000005U << DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_SHIFT
+			| 0x0000001FU << DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_CRCPARCTL2_OFFSET ,0x01FF1F3FU ,0x0040051FU);
+	/*############################################################################################################################ */
+
+		/*Register : INIT0 @ 0XFD0700D0

+
+		If lower bit is enabled the SDRAM initialization routine is skipped. The upper bit decides what state the controller starts u
+		 in when reset is removed - 00 - SDRAM Intialization routine is run after power-up - 01 - SDRAM Intialization routine is skip
+		ed after power-up. Controller starts up in Normal Mode - 11 - SDRAM Intialization routine is skipped after power-up. Controll
+		r starts up in Self-refresh Mode - 10 - SDRAM Intialization routine is run after power-up. Note: The only 2'b00 is supported 
+		or LPDDR4 in this version of the uMCTL2.
+		PSU_DDRC_INIT0_SKIP_DRAM_INIT                                                   0x0
+
+		Cycles to wait after driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clocks. DDR2 typically requires 
+		 400 ns delay, requiring this value to be programmed to 2 at all clock speeds. LPDDR2/LPDDR3 typically requires this to be pr
+		grammed for a delay of 200 us. LPDDR4 typically requires this to be programmed for a delay of 2 us. For configurations with M
+		MC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it up to next integer value.
+		PSU_DDRC_INIT0_POST_CKE_X1024                                                   0x2
+
+		Cycles to wait after reset before driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clock cycles. DDR2 
+		pecifications typically require this to be programmed for a delay of >= 200 us. LPDDR2/LPDDR3: tINIT1 of 100 ns (min) LPDDR4:
+		tINIT3 of 2 ms (min) For configurations with MEMC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it u
+		 to next integer value.
+		PSU_DDRC_INIT0_PRE_CKE_X1024                                                    0x106
+
+		SDRAM Initialization Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0700D0, 0xC3FF0FFFU ,0x00020106U)  
+		RegMask = (DDRC_INIT0_SKIP_DRAM_INIT_MASK | DDRC_INIT0_POST_CKE_X1024_MASK | DDRC_INIT0_PRE_CKE_X1024_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_INIT0_SKIP_DRAM_INIT_SHIFT
+			| 0x00000002U << DDRC_INIT0_POST_CKE_X1024_SHIFT
+			| 0x00000106U << DDRC_INIT0_PRE_CKE_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT0_OFFSET ,0xC3FF0FFFU ,0x00020106U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT1 @ 0XFD0700D4

+
+		Number of cycles to assert SDRAM reset signal during init sequence. This is only present for designs supporting DDR3, DDR4 or
+		LPDDR4 devices. For use with a DDR PHY, this should be set to a minimum of 1
+		PSU_DDRC_INIT1_DRAM_RSTN_X1024                                                  0x2
+
+		Cycles to wait after completing the SDRAM initialization sequence before starting the dynamic scheduler. Unit: Counts of a gl
+		bal timer that pulses every 32 clock cycles. There is no known specific requirement for this; it may be set to zero.
+		PSU_DDRC_INIT1_FINAL_WAIT_X32                                                   0x0
+
+		Wait period before driving the OCD complete command to SDRAM. Unit: Counts of a global timer that pulses every 32 clock cycle
+		. There is no known specific requirement for this; it may be set to zero.
+		PSU_DDRC_INIT1_PRE_OCD_X32                                                      0x0
+
+		SDRAM Initialization Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0700D4, 0x01FF7F0FU ,0x00020000U)  
+		RegMask = (DDRC_INIT1_DRAM_RSTN_X1024_MASK | DDRC_INIT1_FINAL_WAIT_X32_MASK | DDRC_INIT1_PRE_OCD_X32_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_INIT1_DRAM_RSTN_X1024_SHIFT
+			| 0x00000000U << DDRC_INIT1_FINAL_WAIT_X32_SHIFT
+			| 0x00000000U << DDRC_INIT1_PRE_OCD_X32_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT1_OFFSET ,0x01FF7F0FU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT2 @ 0XFD0700D8

+
+		Idle time after the reset command, tINIT4. Present only in designs configured to support LPDDR2. Unit: 32 clock cycles.
+		PSU_DDRC_INIT2_IDLE_AFTER_RESET_X32                                             0x23
+
+		Time to wait after the first CKE high, tINIT2. Present only in designs configured to support LPDDR2/LPDDR3. Unit: 1 clock cyc
+		e. LPDDR2/LPDDR3 typically requires 5 x tCK delay.
+		PSU_DDRC_INIT2_MIN_STABLE_CLOCK_X1                                              0x5
+
+		SDRAM Initialization Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0700D8, 0x0000FF0FU ,0x00002305U)  
+		RegMask = (DDRC_INIT2_IDLE_AFTER_RESET_X32_MASK | DDRC_INIT2_MIN_STABLE_CLOCK_X1_MASK |  0 );
+
+		RegVal = ((0x00000023U << DDRC_INIT2_IDLE_AFTER_RESET_X32_SHIFT
+			| 0x00000005U << DDRC_INIT2_MIN_STABLE_CLOCK_X1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT2_OFFSET ,0x0000FF0FU ,0x00002305U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT3 @ 0XFD0700DC

+
+		DDR2: Value to write to MR register. Bit 8 is for DLL and the setting here is ignored. The uMCTL2 sets this bit appropriately
+		 DDR3/DDR4: Value loaded into MR0 register. mDDR: Value to write to MR register. LPDDR2/LPDDR3/LPDDR4 - Value to write to MR1
+		register
+		PSU_DDRC_INIT3_MR                                                               0x930
+
+		DDR2: Value to write to EMR register. Bits 9:7 are for OCD and the setting in this register is ignored. The uMCTL2 sets those
+		bits appropriately. DDR3/DDR4: Value to write to MR1 register Set bit 7 to 0. If PHY-evaluation mode training is enabled, thi
+		 bit is set appropriately by the uMCTL2 during write leveling. mDDR: Value to write to EMR register. LPDDR2/LPDDR3/LPDDR4 - V
+		lue to write to MR2 register
+		PSU_DDRC_INIT3_EMR                                                              0x301
+
+		SDRAM Initialization Register 3
+		(OFFSET, MASK, VALUE)      (0XFD0700DC, 0xFFFFFFFFU ,0x09300301U)  
+		RegMask = (DDRC_INIT3_MR_MASK | DDRC_INIT3_EMR_MASK |  0 );
+
+		RegVal = ((0x00000930U << DDRC_INIT3_MR_SHIFT
+			| 0x00000301U << DDRC_INIT3_EMR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT3_OFFSET ,0xFFFFFFFFU ,0x09300301U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT4 @ 0XFD0700E0

+
+		DDR2: Value to write to EMR2 register. DDR3/DDR4: Value to write to MR2 register LPDDR2/LPDDR3/LPDDR4: Value to write to MR3 
+		egister mDDR: Unused
+		PSU_DDRC_INIT4_EMR2                                                             0x20
+
+		DDR2: Value to write to EMR3 register. DDR3/DDR4: Value to write to MR3 register mDDR/LPDDR2/LPDDR3: Unused LPDDR4: Value to 
+		rite to MR13 register
+		PSU_DDRC_INIT4_EMR3                                                             0x200
+
+		SDRAM Initialization Register 4
+		(OFFSET, MASK, VALUE)      (0XFD0700E0, 0xFFFFFFFFU ,0x00200200U)  
+		RegMask = (DDRC_INIT4_EMR2_MASK | DDRC_INIT4_EMR3_MASK |  0 );
+
+		RegVal = ((0x00000020U << DDRC_INIT4_EMR2_SHIFT
+			| 0x00000200U << DDRC_INIT4_EMR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT4_OFFSET ,0xFFFFFFFFU ,0x00200200U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT5 @ 0XFD0700E4

+
+		ZQ initial calibration, tZQINIT. Present only in designs configured to support DDR3 or DDR4 or LPDDR2/LPDDR3. Unit: 32 clock 
+		ycles. DDR3 typically requires 512 clocks. DDR4 requires 1024 clocks. LPDDR2/LPDDR3 requires 1 us.
+		PSU_DDRC_INIT5_DEV_ZQINIT_X32                                                   0x21
+
+		Maximum duration of the auto initialization, tINIT5. Present only in designs configured to support LPDDR2/LPDDR3. LPDDR2/LPDD
+		3 typically requires 10 us.
+		PSU_DDRC_INIT5_MAX_AUTO_INIT_X1024                                              0x4
+
+		SDRAM Initialization Register 5
+		(OFFSET, MASK, VALUE)      (0XFD0700E4, 0x00FF03FFU ,0x00210004U)  
+		RegMask = (DDRC_INIT5_DEV_ZQINIT_X32_MASK | DDRC_INIT5_MAX_AUTO_INIT_X1024_MASK |  0 );
+
+		RegVal = ((0x00000021U << DDRC_INIT5_DEV_ZQINIT_X32_SHIFT
+			| 0x00000004U << DDRC_INIT5_MAX_AUTO_INIT_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT5_OFFSET ,0x00FF03FFU ,0x00210004U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT6 @ 0XFD0700E8

+
+		DDR4- Value to be loaded into SDRAM MR4 registers. Used in DDR4 designs only.
+		PSU_DDRC_INIT6_MR4                                                              0x0
+
+		DDR4- Value to be loaded into SDRAM MR5 registers. Used in DDR4 designs only.
+		PSU_DDRC_INIT6_MR5                                                              0x6c0
+
+		SDRAM Initialization Register 6
+		(OFFSET, MASK, VALUE)      (0XFD0700E8, 0xFFFFFFFFU ,0x000006C0U)  
+		RegMask = (DDRC_INIT6_MR4_MASK | DDRC_INIT6_MR5_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_INIT6_MR4_SHIFT
+			| 0x000006C0U << DDRC_INIT6_MR5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT6_OFFSET ,0xFFFFFFFFU ,0x000006C0U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT7 @ 0XFD0700EC

+
+		DDR4- Value to be loaded into SDRAM MR6 registers. Used in DDR4 designs only.
+		PSU_DDRC_INIT7_MR6                                                              0x819
+
+		SDRAM Initialization Register 7
+		(OFFSET, MASK, VALUE)      (0XFD0700EC, 0xFFFF0000U ,0x08190000U)  
+		RegMask = (DDRC_INIT7_MR6_MASK |  0 );
+
+		RegVal = ((0x00000819U << DDRC_INIT7_MR6_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT7_OFFSET ,0xFFFF0000U ,0x08190000U);
+	/*############################################################################################################################ */
+
+		/*Register : DIMMCTL @ 0XFD0700F0

+
+		Disabling Address Mirroring for BG bits. When this is set to 1, BG0 and BG1 are NOT swapped even if Address Mirroring is enab
+		ed. This will be required for DDR4 DIMMs with x16 devices. - 1 - BG0 and BG1 are NOT swapped. - 0 - BG0 and BG1 are swapped i
+		 address mirroring is enabled.
+		PSU_DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING                                          0x0
+
+		Enable for BG1 bit of MRS command. BG1 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have BG1 are attached and both the CA parity and the Output 
+		nversion are enabled, this must be set to 0, so that the calculation of CA parity will not include BG1 bit. Note: This has no
+		effect on the address of any other memory accesses, or of software-driven mode register accesses. If address mirroring is ena
+		led, this is applied to BG1 of even ranks and BG0 of odd ranks. - 1 - Enabled - 0 - Disabled
+		PSU_DDRC_DIMMCTL_MRS_BG1_EN                                                     0x1
+
+		Enable for A17 bit of MRS command. A17 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have A17 are attached and the Output Inversion are enabled, 
+		his must be set to 0, so that the calculation of CA parity will not include A17 bit. Note: This has no effect on the address 
+		f any other memory accesses, or of software-driven mode register accesses. - 1 - Enabled - 0 - Disabled
+		PSU_DDRC_DIMMCTL_MRS_A17_EN                                                     0x0
+
+		Output Inversion Enable (for DDR4 RDIMM implementations only). DDR4 RDIMM implements the Output Inversion feature by default,
+		which means that the following address, bank address and bank group bits of B-side DRAMs are inverted: A3-A9, A11, A13, A17, 
+		A0-BA1, BG0-BG1. Setting this bit ensures that, for mode register accesses generated by the uMCTL2 during the automatic initi
+		lization routine and enabling of a particular DDR4 feature, separate A-side and B-side mode register accesses are generated. 
+		or B-side mode register accesses, these bits are inverted within the uMCTL2 to compensate for this RDIMM inversion. Note: Thi
+		 has no effect on the address of any other memory accesses, or of software-driven mode register accesses. - 1 - Implement out
+		ut inversion for B-side DRAMs. - 0 - Do not implement output inversion for B-side DRAMs.
+		PSU_DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN                                             0x0
+
+		Address Mirroring Enable (for multi-rank UDIMM implementations and multi-rank DDR4 RDIMM implementations). Some UDIMMs and DD
+		4 RDIMMs implement address mirroring for odd ranks, which means that the following address, bank address and bank group bits 
+		re swapped: (A3, A4), (A5, A6), (A7, A8), (BA0, BA1) and also (A11, A13), (BG0, BG1) for the DDR4. Setting this bit ensures t
+		at, for mode register accesses during the automatic initialization routine, these bits are swapped within the uMCTL2 to compe
+		sate for this UDIMM/RDIMM swapping. In addition to the automatic initialization routine, in case of DDR4 UDIMM/RDIMM, they ar
+		 swapped during the automatic MRS access to enable/disable of a particular DDR4 feature. Note: This has no effect on the addr
+		ss of any other memory accesses, or of software-driven mode register accesses. This is not supported for mDDR, LPDDR2, LPDDR3
+		or LPDDR4 SDRAMs. Note: In case of x16 DDR4 DIMMs, BG1 output of MRS for the odd ranks is same as BG0 because BG1 is invalid,
+		hence dimm_dis_bg_mirroring register must be set to 1. - 1 - For odd ranks, implement address mirroring for MRS commands to d
+		ring initialization and for any automatic DDR4 MRS commands (to be used if UDIMM/RDIMM implements address mirroring) - 0 - Do
+		not implement address mirroring
+		PSU_DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN                                              0x0
+
+		Staggering enable for multi-rank accesses (for multi-rank UDIMM and RDIMM implementations only). This is not supported for mD
+		R, LPDDR2, LPDDR3 or LPDDR4 SDRAMs. Note: Even if this bit is set it does not take care of software driven MR commands (via M
+		CTRL0/MRCTRL1), where software is responsible to send them to seperate ranks as appropriate. - 1 - (DDR4) Send MRS commands t
+		 each ranks seperately - 1 - (non-DDR4) Send all commands to even and odd ranks seperately - 0 - Do not stagger accesses
+		PSU_DDRC_DIMMCTL_DIMM_STAGGER_CS_EN                                             0x0
+
+		DIMM Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0700F0, 0x0000003FU ,0x00000010U)  
+		RegMask = (DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_MASK | DDRC_DIMMCTL_MRS_BG1_EN_MASK | DDRC_DIMMCTL_MRS_A17_EN_MASK | DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_MASK | DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_MASK | DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_SHIFT
+			| 0x00000001U << DDRC_DIMMCTL_MRS_BG1_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_MRS_A17_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DIMMCTL_OFFSET ,0x0000003FU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : RANKCTL @ 0XFD0700F4

+
+		Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e writes to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should c
+		nsider both PHY requirement and ODT requirement. - PHY requirement: tphy_wrcsgap + 1 (see PHY databook for value of tphy_wrcs
+		ap) If CRC feature is enabled, should be increased by 1. If write preamble is set to 2tCK(DDR4/LPDDR4 only), should be increa
+		ed by 1. If write postamble is set to 1.5tCK(LPDDR4 only), should be increased by 1. - ODT requirement: The value programmed 
+		n this register takes care of the ODT switch off timing requirement when switching ranks during writes. For LPDDR4, the requi
+		ement is ODTLoff - ODTLon - BL/2 + 1 For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY requirement
+		or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and round it u
+		 to the next integer.
+		PSU_DDRC_RANKCTL_DIFF_RANK_WR_GAP                                               0x6
+
+		Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e reads to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should co
+		sider both PHY requirement and ODT requirement. - PHY requirement: tphy_rdcsgap + 1 (see PHY databook for value of tphy_rdcsg
+		p) If read preamble is set to 2tCK(DDR4/LPDDR4 only), should be increased by 1. If read postamble is set to 1.5tCK(LPDDR4 onl
+		), should be increased by 1. - ODT requirement: The value programmed in this register takes care of the ODT switch off timing
+		requirement when switching ranks during reads. For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY r
+		quirement or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and 
+		ound it up to the next integer.
+		PSU_DDRC_RANKCTL_DIFF_RANK_RD_GAP                                               0x6
+
+		Only present for multi-rank configurations. Background: Reads to the same rank can be performed back-to-back. Reads to differ
+		nt ranks require additional gap dictated by the register RANKCTL.diff_rank_rd_gap. This is to avoid possible data bus content
+		on as well as to give PHY enough time to switch the delay when changing ranks. The uMCTL2 arbitrates for bus access on a cycl
+		-by-cycle basis; therefore after a read is scheduled, there are few clock cycles (determined by the value on RANKCTL.diff_ran
+		_rd_gap register) in which only reads from the same rank are eligible to be scheduled. This prevents reads from other ranks f
+		om having fair access to the data bus. This parameter represents the maximum number of reads that can be scheduled consecutiv
+		ly to the same rank. After this number is reached, a delay equal to RANKCTL.diff_rank_rd_gap is inserted by the scheduler to 
+		llow all ranks a fair opportunity to be scheduled. Higher numbers increase bandwidth utilization, lower numbers increase fair
+		ess. This feature can be DISABLED by setting this register to 0. When set to 0, the Controller will stay on the same rank as 
+		ong as commands are available for it. Minimum programmable value is 0 (feature disabled) and maximum programmable value is 0x
+		. FOR PERFORMANCE ONLY.
+		PSU_DDRC_RANKCTL_MAX_RANK_RD                                                    0xf
+
+		Rank Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0700F4, 0x00000FFFU ,0x0000066FU)  
+		RegMask = (DDRC_RANKCTL_DIFF_RANK_WR_GAP_MASK | DDRC_RANKCTL_DIFF_RANK_RD_GAP_MASK | DDRC_RANKCTL_MAX_RANK_RD_MASK |  0 );
+
+		RegVal = ((0x00000006U << DDRC_RANKCTL_DIFF_RANK_WR_GAP_SHIFT
+			| 0x00000006U << DDRC_RANKCTL_DIFF_RANK_RD_GAP_SHIFT
+			| 0x0000000FU << DDRC_RANKCTL_MAX_RANK_RD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RANKCTL_OFFSET ,0x00000FFFU ,0x0000066FU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG0 @ 0XFD070100

+
+		Minimum time between write and precharge to same bank. Unit: Clocks Specifications: WL + BL/2 + tWR = approximately 8 cycles 
+		 15 ns = 14 clocks @400MHz and less for lower frequencies where: - WL = write latency - BL = burst length. This must match th
+		 value programmed in the BL bit of the mode register to the SDRAM. BST (burst terminate) is not supported at present. - tWR =
+		Write recovery time. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 for this 
+		arameter. For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For configurations
+		with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer value.
+		PSU_DDRC_DRAMTMG0_WR2PRE                                                        0x11
+
+		tFAW Valid only when 8 or more banks(or banks x bank groups) are present. In 8-bank design, at most 4 banks must be activated
+		in a rolling window of tFAW cycles. For configurations with MEMC_FREQ_RATIO=2, program this to (tFAW/2) and round up to next 
+		nteger value. In a 4-bank design, set this register to 0x1 independent of the MEMC_FREQ_RATIO configuration. Unit: Clocks
+		PSU_DDRC_DRAMTMG0_T_FAW                                                         0xc
+
+		tRAS(max): Maximum time between activate and precharge to same bank. This is the maximum time that a page can be kept open Mi
+		imum value of this register is 1. Zero is invalid. For configurations with MEMC_FREQ_RATIO=2, program this to (tRAS(max)-1)/2
+		 No rounding up. Unit: Multiples of 1024 clocks.
+		PSU_DDRC_DRAMTMG0_T_RAS_MAX                                                     0x24
+
+		tRAS(min): Minimum time between activate and precharge to the same bank. For configurations with MEMC_FREQ_RATIO=2, 1T mode, 
+		rogram this to tRAS(min)/2. No rounding up. For configurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, program this t
+		 (tRAS(min)/2) and round it up to the next integer value. Unit: Clocks
+		PSU_DDRC_DRAMTMG0_T_RAS_MIN                                                     0x12
+
+		SDRAM Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070100, 0x7F3F7F3FU ,0x110C2412U)  
+		RegMask = (DDRC_DRAMTMG0_WR2PRE_MASK | DDRC_DRAMTMG0_T_FAW_MASK | DDRC_DRAMTMG0_T_RAS_MAX_MASK | DDRC_DRAMTMG0_T_RAS_MIN_MASK |  0 );
+
+		RegVal = ((0x00000011U << DDRC_DRAMTMG0_WR2PRE_SHIFT
+			| 0x0000000CU << DDRC_DRAMTMG0_T_FAW_SHIFT
+			| 0x00000024U << DDRC_DRAMTMG0_T_RAS_MAX_SHIFT
+			| 0x00000012U << DDRC_DRAMTMG0_T_RAS_MIN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG0_OFFSET ,0x7F3F7F3FU ,0x110C2412U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG1 @ 0XFD070104

+
+		tXP: Minimum time after power-down exit to any operation. For DDR3, this should be programmed to tXPDLL if slow powerdown exi
+		 is selected in MR0[12]. If C/A parity for DDR4 is used, set to (tXP+PL) instead. For configurations with MEMC_FREQ_RATIO=2, 
+		rogram this to (tXP/2) and round it up to the next integer value. Units: Clocks
+		PSU_DDRC_DRAMTMG1_T_XP                                                          0x4
+
+		tRTP: Minimum time from read to precharge of same bank. - DDR2: tAL + BL/2 + max(tRTP, 2) - 2 - DDR3: tAL + max (tRTP, 4) - D
+		R4: Max of following two equations: tAL + max (tRTP, 4) or, RL + BL/2 - tRP. - mDDR: BL/2 - LPDDR2: Depends on if it's LPDDR2
+		S2 or LPDDR2-S4: LPDDR2-S2: BL/2 + tRTP - 1. LPDDR2-S4: BL/2 + max(tRTP,2) - 2. - LPDDR3: BL/2 + max(tRTP,4) - 4 - LPDDR4: BL
+		2 + max(tRTP,8) - 8 For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For conf
+		gurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer val
+		e. Unit: Clocks.
+		PSU_DDRC_DRAMTMG1_RD2PRE                                                        0x4
+
+		tRC: Minimum time between activates to same bank. For configurations with MEMC_FREQ_RATIO=2, program this to (tRC/2) and roun
+		 up to next integer value. Unit: Clocks.
+		PSU_DDRC_DRAMTMG1_T_RC                                                          0x19
+
+		SDRAM Timing Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070104, 0x001F1F7FU ,0x00040419U)  
+		RegMask = (DDRC_DRAMTMG1_T_XP_MASK | DDRC_DRAMTMG1_RD2PRE_MASK | DDRC_DRAMTMG1_T_RC_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDRC_DRAMTMG1_T_XP_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG1_RD2PRE_SHIFT
+			| 0x00000019U << DDRC_DRAMTMG1_T_RC_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG1_OFFSET ,0x001F1F7FU ,0x00040419U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG2 @ 0XFD070108

+
+		Set to WL Time from write command to write data on SDRAM interface. This must be set to WL. For mDDR, it should normally be s
+		t to 1. Note that, depending on the PHY, if using RDIMM, it may be necessary to use a value of WL + 1 to compensate for the e
+		tra cycle of latency through the RDIMM For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above
+		equation by 2, and round it up to next integer. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAININ
+		 is set), as the DFI read and write latencies defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
+		PSU_DDRC_DRAMTMG2_WRITE_LATENCY                                                 0x7
+
+		Set to RL Time from read command to read data on SDRAM interface. This must be set to RL. Note that, depending on the PHY, if
+		using RDIMM, it mat be necessary to use a value of RL + 1 to compensate for the extra cycle of latency through the RDIMM For 
+		onfigurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next inte
+		er. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAINING is set), as the DFI read and write latenci
+		s defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
+		PSU_DDRC_DRAMTMG2_READ_LATENCY                                                  0x8
+
+		DDR2/3/mDDR: RL + BL/2 + 2 - WL DDR4: RL + BL/2 + 1 + WR_PREAMBLE - WL LPDDR2/LPDDR3: RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL 
+		PDDR4(DQ ODT is Disabled): RL + BL/2 + RU(tDQSCKmax/tCK) + WR_PREAMBLE + RD_POSTAMBLE - WL LPDDR4(DQ ODT is Enabled) : RL + B
+		/2 + RU(tDQSCKmax/tCK) + RD_POSTAMBLE - ODTLon - RU(tODTon(min)/tCK) Minimum time from read command to write command. Include
+		time for bus turnaround and all per-bank, per-rank, and global constraints. Unit: Clocks. Where: - WL = write latency - BL = 
+		urst length. This must match the value programmed in the BL bit of the mode register to the SDRAM - RL = read latency = CAS l
+		tency - WR_PREAMBLE = write preamble. This is unique to DDR4 and LPDDR4. - RD_POSTAMBLE = read postamble. This is unique to L
+		DDR4. For LPDDR2/LPDDR3/LPDDR4, if derating is enabled (DERATEEN.derate_enable=1), derated tDQSCKmax should be used. For conf
+		gurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
+		PSU_DDRC_DRAMTMG2_RD2WR                                                         0x6
+
+		DDR4: CWL + PL + BL/2 + tWTR_L Others: CWL + BL/2 + tWTR In DDR4, minimum time from write command to read command for same ba
+		k group. In others, minimum time from write command to read command. Includes time for bus turnaround, recovery times, and al
+		 per-bank, per-rank, and global constraints. Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burs
+		 length. This must match the value programmed in the BL bit of the mode register to the SDRAM - tWTR_L = internal write to re
+		d command delay for same bank group. This comes directly from the SDRAM specification. - tWTR = internal write to read comman
+		 delay. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 operation. For configu
+		ations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
+		PSU_DDRC_DRAMTMG2_WR2RD                                                         0xe
+
+		SDRAM Timing Register 2
+		(OFFSET, MASK, VALUE)      (0XFD070108, 0x3F3F3F3FU ,0x0708060EU)  
+		RegMask = (DDRC_DRAMTMG2_WRITE_LATENCY_MASK | DDRC_DRAMTMG2_READ_LATENCY_MASK | DDRC_DRAMTMG2_RD2WR_MASK | DDRC_DRAMTMG2_WR2RD_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDRC_DRAMTMG2_WRITE_LATENCY_SHIFT
+			| 0x00000008U << DDRC_DRAMTMG2_READ_LATENCY_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG2_RD2WR_SHIFT
+			| 0x0000000EU << DDRC_DRAMTMG2_WR2RD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG2_OFFSET ,0x3F3F3F3FU ,0x0708060EU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG3 @ 0XFD07010C

+
+		Time to wait after a mode register write or read (MRW or MRR). Present only in designs configured to support LPDDR2, LPDDR3 o
+		 LPDDR4. LPDDR2 typically requires value of 5. LPDDR3 typically requires value of 10. LPDDR4: Set this to the larger of tMRW 
+		nd tMRWCKEL. For LPDDR2, this register is used for the time from a MRW/MRR to all other commands. For LDPDR3, this register i
+		 used for the time from a MRW/MRR to a MRW/MRR.
+		PSU_DDRC_DRAMTMG3_T_MRW                                                         0x5
+
+		tMRD: Cycles to wait after a mode register write or read. Depending on the connected SDRAM, tMRD represents: DDR2/mDDR: Time 
+		rom MRS to any command DDR3/4: Time from MRS to MRS command LPDDR2: not used LPDDR3/4: Time from MRS to non-MRS command For c
+		nfigurations with MEMC_FREQ_RATIO=2, program this to (tMRD/2) and round it up to the next integer value. If C/A parity for DD
+		4 is used, set to tMRD_PAR(tMOD+PL) instead.
+		PSU_DDRC_DRAMTMG3_T_MRD                                                         0x4
+
+		tMOD: Parameter used only in DDR3 and DDR4. Cycles between load mode command and following non-load mode command. If C/A pari
+		y for DDR4 is used, set to tMOD_PAR(tMOD+PL) instead. Set to tMOD if MEMC_FREQ_RATIO=1, or tMOD/2 (rounded up to next integer
+		 if MEMC_FREQ_RATIO=2. Note that if using RDIMM, depending on the PHY, it may be necessary to use a value of tMOD + 1 or (tMO
+		 + 1)/2 to compensate for the extra cycle of latency applied to mode register writes by the RDIMM chip.
+		PSU_DDRC_DRAMTMG3_T_MOD                                                         0xc
+
+		SDRAM Timing Register 3
+		(OFFSET, MASK, VALUE)      (0XFD07010C, 0x3FF3F3FFU ,0x0050400CU)  
+		RegMask = (DDRC_DRAMTMG3_T_MRW_MASK | DDRC_DRAMTMG3_T_MRD_MASK | DDRC_DRAMTMG3_T_MOD_MASK |  0 );
+
+		RegVal = ((0x00000005U << DDRC_DRAMTMG3_T_MRW_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG3_T_MRD_SHIFT
+			| 0x0000000CU << DDRC_DRAMTMG3_T_MOD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG3_OFFSET ,0x3FF3F3FFU ,0x0050400CU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG4 @ 0XFD070110

+
+		tRCD - tAL: Minimum time from activate to read or write command to same bank. For configurations with MEMC_FREQ_RATIO=2, prog
+		am this to ((tRCD - tAL)/2) and round it up to the next integer value. Minimum value allowed for this register is 1, which im
+		lies minimum (tRCD - tAL) value to be 2 in configurations with MEMC_FREQ_RATIO=2. Unit: Clocks.
+		PSU_DDRC_DRAMTMG4_T_RCD                                                         0x8
+
+		DDR4: tCCD_L: This is the minimum time between two reads or two writes for same bank group. Others: tCCD: This is the minimum
+		time between two reads or two writes. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_L/2 or tCCD/2) and rou
+		d it up to the next integer value. Unit: clocks.
+		PSU_DDRC_DRAMTMG4_T_CCD                                                         0x3
+
+		DDR4: tRRD_L: Minimum time between activates from bank 'a' to bank 'b' for same bank group. Others: tRRD: Minimum time betwee
+		 activates from bank 'a' to bank 'b'For configurations with MEMC_FREQ_RATIO=2, program this to (tRRD_L/2 or tRRD/2) and round
+		it up to the next integer value. Unit: Clocks.
+		PSU_DDRC_DRAMTMG4_T_RRD                                                         0x3
+
+		tRP: Minimum time from precharge to activate of same bank. For MEMC_FREQ_RATIO=1 configurations, t_rp should be set to RoundU
+		(tRP/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rp should be set to RoundDown(RoundUp(tRP/tCK)/2) + 1. For MEMC_FREQ_RATIO
+		2 configurations in LPDDR4, t_rp should be set to RoundUp(RoundUp(tRP/tCK)/2). Unit: Clocks.
+		PSU_DDRC_DRAMTMG4_T_RP                                                          0x9
+
+		SDRAM Timing Register 4
+		(OFFSET, MASK, VALUE)      (0XFD070110, 0x1F0F0F1FU ,0x08030309U)  
+		RegMask = (DDRC_DRAMTMG4_T_RCD_MASK | DDRC_DRAMTMG4_T_CCD_MASK | DDRC_DRAMTMG4_T_RRD_MASK | DDRC_DRAMTMG4_T_RP_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_DRAMTMG4_T_RCD_SHIFT
+			| 0x00000003U << DDRC_DRAMTMG4_T_CCD_SHIFT
+			| 0x00000003U << DDRC_DRAMTMG4_T_RRD_SHIFT
+			| 0x00000009U << DDRC_DRAMTMG4_T_RP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG4_OFFSET ,0x1F0F0F1FU ,0x08030309U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG5 @ 0XFD070114

+
+		This is the time before Self Refresh Exit that CK is maintained as a valid clock before issuing SRX. Specifies the clock stab
+		e time before SRX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEH - DDR2: 1 - DDR3: tCKSRX - DDR4:
+		tCKSRX For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next in
+		eger.
+		PSU_DDRC_DRAMTMG5_T_CKSRX                                                       0x6
+
+		This is the time after Self Refresh Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay afte
+		 SRE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL - DDR2: 1 - DDR3: max (10 ns, 5 tCK) - DDR4: 
+		ax (10 ns, 5 tCK) For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up
+		to next integer.
+		PSU_DDRC_DRAMTMG5_T_CKSRE                                                       0x6
+
+		Minimum CKE low width for Self refresh or Self refresh power down entry to exit timing in memory clock cycles. Recommended se
+		tings: - mDDR: tRFC - LPDDR2: tCKESR - LPDDR3: tCKESR - LPDDR4: max(tCKELPD, tSR) - DDR2: tCKE - DDR3: tCKE + 1 - DDR4: tCKE 
+		 1 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next intege
+		.
+		PSU_DDRC_DRAMTMG5_T_CKESR                                                       0x4
+
+		Minimum number of cycles of CKE HIGH/LOW during power-down and self refresh. - LPDDR2/LPDDR3 mode: Set this to the larger of 
+		CKE or tCKESR - LPDDR4 mode: Set this to the larger of tCKE, tCKELPD or tSR. - Non-LPDDR2/non-LPDDR3/non-LPDDR4 designs: Set 
+		his to tCKE value. For configurations with MEMC_FREQ_RATIO=2, program this to (value described above)/2 and round it up to th
+		 next integer value. Unit: Clocks.
+		PSU_DDRC_DRAMTMG5_T_CKE                                                         0x3
+
+		SDRAM Timing Register 5
+		(OFFSET, MASK, VALUE)      (0XFD070114, 0x0F0F3F1FU ,0x06060403U)  
+		RegMask = (DDRC_DRAMTMG5_T_CKSRX_MASK | DDRC_DRAMTMG5_T_CKSRE_MASK | DDRC_DRAMTMG5_T_CKESR_MASK | DDRC_DRAMTMG5_T_CKE_MASK |  0 );
+
+		RegVal = ((0x00000006U << DDRC_DRAMTMG5_T_CKSRX_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG5_T_CKSRE_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG5_T_CKESR_SHIFT
+			| 0x00000003U << DDRC_DRAMTMG5_T_CKE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG5_OFFSET ,0x0F0F3F1FU ,0x06060403U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG6 @ 0XFD070118

+
+		This is the time after Deep Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after 
+		PDE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, program this to recom
+		ended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3
+		devices.
+		PSU_DDRC_DRAMTMG6_T_CKDPDE                                                      0x1
+
+		This is the time before Deep Power Down Exit that CK is maintained as a valid clock before issuing DPDX. Specifies the clock 
+		table time before DPDX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, pr
+		gram this to recommended value divided by two and round it up to next integer. This is only present for designs supporting mD
+		R or LPDDR2 devices.
+		PSU_DDRC_DRAMTMG6_T_CKDPDX                                                      0x1
+
+		This is the time before Clock Stop Exit that CK is maintained as a valid clock before issuing Clock Stop Exit. Specifies the 
+		lock stable time before next command after Clock Stop Exit. Recommended settings: - mDDR: 1 - LPDDR2: tXP + 2 - LPDDR3: tXP +
+		2 - LPDDR4: tXP + 2 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it 
+		p to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_DRAMTMG6_T_CKCSX                                                       0x4
+
+		SDRAM Timing Register 6
+		(OFFSET, MASK, VALUE)      (0XFD070118, 0x0F0F000FU ,0x01010004U)  
+		RegMask = (DDRC_DRAMTMG6_T_CKDPDE_MASK | DDRC_DRAMTMG6_T_CKDPDX_MASK | DDRC_DRAMTMG6_T_CKCSX_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_DRAMTMG6_T_CKDPDE_SHIFT
+			| 0x00000001U << DDRC_DRAMTMG6_T_CKDPDX_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG6_T_CKCSX_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG6_OFFSET ,0x0F0F000FU ,0x01010004U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG7 @ 0XFD07011C

+
+		This is the time after Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after PDE. 
+		ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t
+		is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L
+		DDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_DRAMTMG7_T_CKPDE                                                       0x1
+
+		This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable
+		time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO=
+		, program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti
+		g mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_DRAMTMG7_T_CKPDX                                                       0x1
+
+		SDRAM Timing Register 7
+		(OFFSET, MASK, VALUE)      (0XFD07011C, 0x00000F0FU ,0x00000101U)  
+		RegMask = (DDRC_DRAMTMG7_T_CKPDE_MASK | DDRC_DRAMTMG7_T_CKPDX_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_DRAMTMG7_T_CKPDE_SHIFT
+			| 0x00000001U << DDRC_DRAMTMG7_T_CKPDX_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG7_OFFSET ,0x00000F0FU ,0x00000101U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG8 @ 0XFD070120

+
+		tXS_FAST: Exit Self Refresh to ZQCL, ZQCS and MRS (only CL, WR, RTP and Geardown mode). For configurations with MEMC_FREQ_RAT
+		O=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Thi
+		 is applicable to only ZQCL/ZQCS commands. Note: Ensure this is less than or equal to t_xs_x32.
+		PSU_DDRC_DRAMTMG8_T_XS_FAST_X32                                                 0x4
+
+		tXS_ABORT: Exit Self Refresh to commands not requiring a locked DLL in Self Refresh Abort. For configurations with MEMC_FREQ_
+		ATIO=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: 
+		nsure this is less than or equal to t_xs_x32.
+		PSU_DDRC_DRAMTMG8_T_XS_ABORT_X32                                                0x4
+
+		tXSDLL: Exit Self Refresh to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the 
+		bove value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and 
+		DR4 SDRAMs.
+		PSU_DDRC_DRAMTMG8_T_XS_DLL_X32                                                  0xd
+
+		tXS: Exit Self Refresh to commands not requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the
+		above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and
+		DDR4 SDRAMs.
+		PSU_DDRC_DRAMTMG8_T_XS_X32                                                      0x6
+
+		SDRAM Timing Register 8
+		(OFFSET, MASK, VALUE)      (0XFD070120, 0x7F7F7F7FU ,0x04040D06U)  
+		RegMask = (DDRC_DRAMTMG8_T_XS_FAST_X32_MASK | DDRC_DRAMTMG8_T_XS_ABORT_X32_MASK | DDRC_DRAMTMG8_T_XS_DLL_X32_MASK | DDRC_DRAMTMG8_T_XS_X32_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDRC_DRAMTMG8_T_XS_FAST_X32_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG8_T_XS_ABORT_X32_SHIFT
+			| 0x0000000DU << DDRC_DRAMTMG8_T_XS_DLL_X32_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG8_T_XS_X32_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG8_OFFSET ,0x7F7F7F7FU ,0x04040D06U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG9 @ 0XFD070124

+
+		DDR4 Write preamble mode - 0: 1tCK preamble - 1: 2tCK preamble Present only with MEMC_FREQ_RATIO=2
+		PSU_DDRC_DRAMTMG9_DDR4_WR_PREAMBLE                                              0x0
+
+		tCCD_S: This is the minimum time between two reads or two writes for different bank group. For bank switching (from bank 'a' 
+		o bank 'b'), the minimum time is this value + 1. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_S/2) and ro
+		nd it up to the next integer value. Present only in designs configured to support DDR4. Unit: clocks.
+		PSU_DDRC_DRAMTMG9_T_CCD_S                                                       0x2
+
+		tRRD_S: Minimum time between activates from bank 'a' to bank 'b' for different bank group. For configurations with MEMC_FREQ_
+		ATIO=2, program this to (tRRD_S/2) and round it up to the next integer value. Present only in designs configured to support D
+		R4. Unit: Clocks.
+		PSU_DDRC_DRAMTMG9_T_RRD_S                                                       0x2
+
+		CWL + PL + BL/2 + tWTR_S Minimum time from write command to read command for different bank group. Includes time for bus turn
+		round, recovery times, and all per-bank, per-rank, and global constraints. Present only in designs configured to support DDR4
+		 Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burst length. This must match the value programm
+		d in the BL bit of the mode register to the SDRAM - tWTR_S = internal write to read command delay for different bank group. T
+		is comes directly from the SDRAM specification. For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using 
+		he above equation by 2, and round it up to next integer.
+		PSU_DDRC_DRAMTMG9_WR2RD_S                                                       0xb
+
+		SDRAM Timing Register 9
+		(OFFSET, MASK, VALUE)      (0XFD070124, 0x40070F3FU ,0x0002020BU)  
+		RegMask = (DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_MASK | DDRC_DRAMTMG9_T_CCD_S_MASK | DDRC_DRAMTMG9_T_RRD_S_MASK | DDRC_DRAMTMG9_WR2RD_S_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_SHIFT
+			| 0x00000002U << DDRC_DRAMTMG9_T_CCD_S_SHIFT
+			| 0x00000002U << DDRC_DRAMTMG9_T_RRD_S_SHIFT
+			| 0x0000000BU << DDRC_DRAMTMG9_WR2RD_S_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG9_OFFSET ,0x40070F3FU ,0x0002020BU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG11 @ 0XFD07012C

+
+		tXMPDLL: This is the minimum Exit MPSM to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program
+		this to (tXMPDLL/2) and round it up to the next integer value. Present only in designs configured to support DDR4. Unit: Mult
+		ples of 32 clocks.
+		PSU_DDRC_DRAMTMG11_POST_MPSM_GAP_X32                                            0x6f
+
+		tMPX_LH: This is the minimum CS_n Low hold time to CKE rising edge. For configurations with MEMC_FREQ_RATIO=2, program this t
+		 RoundUp(tMPX_LH/2)+1. Present only in designs configured to support DDR4. Unit: clocks.
+		PSU_DDRC_DRAMTMG11_T_MPX_LH                                                     0x7
+
+		tMPX_S: Minimum time CS setup time to CKE. For configurations with MEMC_FREQ_RATIO=2, program this to (tMPX_S/2) and round it
+		up to the next integer value. Present only in designs configured to support DDR4. Unit: Clocks.
+		PSU_DDRC_DRAMTMG11_T_MPX_S                                                      0x1
+
+		tCKMPE: Minimum valid clock requirement after MPSM entry. Present only in designs configured to support DDR4. Unit: Clocks. F
+		r configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next i
+		teger.
+		PSU_DDRC_DRAMTMG11_T_CKMPE                                                      0xe
+
+		SDRAM Timing Register 11
+		(OFFSET, MASK, VALUE)      (0XFD07012C, 0x7F1F031FU ,0x6F07010EU)  
+		RegMask = (DDRC_DRAMTMG11_POST_MPSM_GAP_X32_MASK | DDRC_DRAMTMG11_T_MPX_LH_MASK | DDRC_DRAMTMG11_T_MPX_S_MASK | DDRC_DRAMTMG11_T_CKMPE_MASK |  0 );
+
+		RegVal = ((0x0000006FU << DDRC_DRAMTMG11_POST_MPSM_GAP_X32_SHIFT
+			| 0x00000007U << DDRC_DRAMTMG11_T_MPX_LH_SHIFT
+			| 0x00000001U << DDRC_DRAMTMG11_T_MPX_S_SHIFT
+			| 0x0000000EU << DDRC_DRAMTMG11_T_CKMPE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG11_OFFSET ,0x7F1F031FU ,0x6F07010EU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG12 @ 0XFD070130

+
+		tCMDCKE: Delay from valid command to CKE input LOW. Set this to the larger of tESCKE or tCMDCKE For configurations with MEMC_
+		REQ_RATIO=2, program this to (max(tESCKE, tCMDCKE)/2) and round it up to next integer value.
+		PSU_DDRC_DRAMTMG12_T_CMDCKE                                                     0x2
+
+		tCKEHCMD: Valid command requirement after CKE input HIGH. For configurations with MEMC_FREQ_RATIO=2, program this to (tCKEHCM
+		/2) and round it up to next integer value.
+		PSU_DDRC_DRAMTMG12_T_CKEHCMD                                                    0x6
+
+		tMRD_PDA: This is the Mode Register Set command cycle time in PDA mode. For configurations with MEMC_FREQ_RATIO=2, program th
+		s to (tMRD_PDA/2) and round it up to next integer value.
+		PSU_DDRC_DRAMTMG12_T_MRD_PDA                                                    0x8
+
+		SDRAM Timing Register 12
+		(OFFSET, MASK, VALUE)      (0XFD070130, 0x00030F1FU ,0x00020608U)  
+		RegMask = (DDRC_DRAMTMG12_T_CMDCKE_MASK | DDRC_DRAMTMG12_T_CKEHCMD_MASK | DDRC_DRAMTMG12_T_MRD_PDA_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_DRAMTMG12_T_CMDCKE_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG12_T_CKEHCMD_SHIFT
+			| 0x00000008U << DDRC_DRAMTMG12_T_MRD_PDA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG12_OFFSET ,0x00030F1FU ,0x00020608U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQCTL0 @ 0XFD070180

+
+		- 1 - Disable uMCTL2 generation of ZQCS/MPC(ZQ calibration) command. Register DBGCMD.zq_calib_short can be used instead to is
+		ue ZQ calibration request from APB module. - 0 - Internally generate ZQCS/MPC(ZQ calibration) commands based on ZQCTL1.t_zq_s
+		ort_interval_x1024. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_DIS_AUTO_ZQ                                                     0x1
+
+		- 1 - Disable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Powerdown exit. Only applicable when run in DDR3
+		or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. - 0 - Enable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Power
+		own exit. Only applicable when run in DDR3 or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. This is only present for designs suppo
+		ting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_DIS_SRX_ZQCL                                                    0x0
+
+		- 1 - Denotes that ZQ resistor is shared between ranks. Means ZQinit/ZQCL/ZQCS/MPC(ZQ calibration) commands are sent to one r
+		nk at a time with tZQinit/tZQCL/tZQCS/tZQCAL/tZQLAT timing met between commands so that commands to different ranks do not ov
+		rlap. - 0 - ZQ resistor is not shared. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_ZQ_RESISTOR_SHARED                                              0x0
+
+		- 1 - Disable issuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. - 0 - Enable 
+		ssuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. This is only present for des
+		gns supporting DDR4 devices.
+		PSU_DDRC_ZQCTL0_DIS_MPSMX_ZQCL                                                  0x0
+
+		tZQoper for DDR3/DDR4, tZQCL for LPDDR2/LPDDR3, tZQCAL for LPDDR4: Number of cycles of NOP required after a ZQCL (ZQ calibrat
+		on long)/MPC(ZQ Start) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2: DDR3/DDR4: program this to tZQo
+		er/2 and round it up to the next integer value. LPDDR2/LPDDR3: program this to tZQCL/2 and round it up to the next integer va
+		ue. LPDDR4: program this to tZQCAL/2 and round it up to the next integer value. Unit: Clock cycles. This is only present for 
+		esigns supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_T_ZQ_LONG_NOP                                                   0x100
+
+		tZQCS for DDR3/DD4/LPDDR2/LPDDR3, tZQLAT for LPDDR4: Number of cycles of NOP required after a ZQCS (ZQ calibration short)/MPC
+		ZQ Latch) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2, program this to tZQCS/2 and round it up to t
+		e next integer value. Unit: Clock cycles. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devic
+		s.
+		PSU_DDRC_ZQCTL0_T_ZQ_SHORT_NOP                                                  0x40
+
+		ZQ Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070180, 0xF7FF03FFU ,0x81000040U)  
+		RegMask = (DDRC_ZQCTL0_DIS_AUTO_ZQ_MASK | DDRC_ZQCTL0_DIS_SRX_ZQCL_MASK | DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_MASK | DDRC_ZQCTL0_DIS_MPSMX_ZQCL_MASK | DDRC_ZQCTL0_T_ZQ_LONG_NOP_MASK | DDRC_ZQCTL0_T_ZQ_SHORT_NOP_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_ZQCTL0_DIS_AUTO_ZQ_SHIFT
+			| 0x00000000U << DDRC_ZQCTL0_DIS_SRX_ZQCL_SHIFT
+			| 0x00000000U << DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_SHIFT
+			| 0x00000000U << DDRC_ZQCTL0_DIS_MPSMX_ZQCL_SHIFT
+			| 0x00000100U << DDRC_ZQCTL0_T_ZQ_LONG_NOP_SHIFT
+			| 0x00000040U << DDRC_ZQCTL0_T_ZQ_SHORT_NOP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ZQCTL0_OFFSET ,0xF7FF03FFU ,0x81000040U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQCTL1 @ 0XFD070184

+
+		tZQReset: Number of cycles of NOP required after a ZQReset (ZQ calibration Reset) command is issued to SDRAM. For configurati
+		ns with MEMC_FREQ_RATIO=2, program this to tZQReset/2 and round it up to the next integer value. Unit: Clock cycles. This is 
+		nly present for designs supporting LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL1_T_ZQ_RESET_NOP                                                  0x20
+
+		Average interval to wait between automatically issuing ZQCS (ZQ calibration short)/MPC(ZQ calibration) commands to DDR3/DDR4/
+		PDDR2/LPDDR3/LPDDR4 devices. Meaningless, if ZQCTL0.dis_auto_zq=1. Unit: 1024 clock cycles. This is only present for designs 
+		upporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024                                       0x19707
+
+		ZQ Control Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070184, 0x3FFFFFFFU ,0x02019707U)  
+		RegMask = (DDRC_ZQCTL1_T_ZQ_RESET_NOP_MASK | DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_MASK |  0 );
+
+		RegVal = ((0x00000020U << DDRC_ZQCTL1_T_ZQ_RESET_NOP_SHIFT
+			| 0x00019707U << DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ZQCTL1_OFFSET ,0x3FFFFFFFU ,0x02019707U);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG0 @ 0XFD070190

+
+		Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
+		PSU_DDRC_DFITMG0_DFI_T_CTRL_DELAY                                               0x4
+
+		Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.
+		PSU_DDRC_DFITMG0_DFI_RDDATA_USE_SDR                                             0x1
+
+		Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks
+		PSU_DDRC_DFITMG0_DFI_T_RDDATA_EN                                                0xb
+
+		Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.
+		PSU_DDRC_DFITMG0_DFI_WRDATA_USE_SDR                                             0x1
+
+		Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks
+		PSU_DDRC_DFITMG0_DFI_TPHY_WRDATA                                                0x2
+
+		Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.
+		PSU_DDRC_DFITMG0_DFI_TPHY_WRLAT                                                 0xb
+
+		DFI Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070190, 0x1FBFBF3FU ,0x048B820BU)  
+		RegMask = (DDRC_DFITMG0_DFI_T_CTRL_DELAY_MASK | DDRC_DFITMG0_DFI_RDDATA_USE_SDR_MASK | DDRC_DFITMG0_DFI_T_RDDATA_EN_MASK | DDRC_DFITMG0_DFI_WRDATA_USE_SDR_MASK | DDRC_DFITMG0_DFI_TPHY_WRDATA_MASK | DDRC_DFITMG0_DFI_TPHY_WRLAT_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDRC_DFITMG0_DFI_T_CTRL_DELAY_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_DFI_RDDATA_USE_SDR_SHIFT
+			| 0x0000000BU << DDRC_DFITMG0_DFI_T_RDDATA_EN_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_DFI_WRDATA_USE_SDR_SHIFT
+			| 0x00000002U << DDRC_DFITMG0_DFI_TPHY_WRDATA_SHIFT
+			| 0x0000000BU << DDRC_DFITMG0_DFI_TPHY_WRLAT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG0_OFFSET ,0x1FBFBF3FU ,0x048B820BU);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG1 @ 0XFD070194

+
+		Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated command is driven. 
+		his field is used for CAL mode, should be set to '0' or the value which matches the CAL mode register setting in the DRAM. If
+		the PHY can add the latency for CAL mode, this should be set to '0'. Valid Range: 0, 3, 4, 5, 6, and 8
+		PSU_DDRC_DFITMG1_DFI_T_CMD_LAT                                                  0x0
+
+		Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated dfi_parity_in signa
+		 is driven.
+		PSU_DDRC_DFITMG1_DFI_T_PARIN_LAT                                                0x0
+
+		Specifies the number of DFI clocks between when the dfi_wrdata_en signal is asserted and when the corresponding write data tr
+		nsfer is completed on the DRAM bus. This corresponds to the DFI timing parameter twrdata_delay. Refer to PHY specification fo
+		 correct value. For DFI 3.0 PHY, set to twrdata_delay, a new timing parameter introduced in DFI 3.0. For DFI 2.1 PHY, set to 
+		phy_wrdata + (delay of DFI write data to the DRAM). Value to be programmed is in terms of DFI clocks, not PHY clocks. In FREQ
+		RATIO=2, divide PHY's value by 2 and round up to next integer. If using DFITMG0.dfi_wrdata_use_sdr=1, add 1 to the value. Uni
+		: Clocks
+		PSU_DDRC_DFITMG1_DFI_T_WRDATA_DELAY                                             0x3
+
+		Specifies the number of DFI clock cycles from the assertion of the dfi_dram_clk_disable signal on the DFI until the clock to 
+		he DRAM memory devices, at the PHY-DRAM boundary, maintains a low value. If the DFI clock and the memory clock are not phase 
+		ligned, this timing parameter should be rounded up to the next integer value.
+		PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE                                         0x3
+
+		Specifies the number of DFI clock cycles from the de-assertion of the dfi_dram_clk_disable signal on the DFI until the first 
+		alid rising edge of the clock to the DRAM memory devices, at the PHY-DRAM boundary. If the DFI clock and the memory clock are
+		not phase aligned, this timing parameter should be rounded up to the next integer value.
+		PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE                                          0x4
+
+		DFI Timing Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070194, 0xF31F0F0FU ,0x00030304U)  
+		RegMask = (DDRC_DFITMG1_DFI_T_CMD_LAT_MASK | DDRC_DFITMG1_DFI_T_PARIN_LAT_MASK | DDRC_DFITMG1_DFI_T_WRDATA_DELAY_MASK | DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_MASK | DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DFITMG1_DFI_T_CMD_LAT_SHIFT
+			| 0x00000000U << DDRC_DFITMG1_DFI_T_PARIN_LAT_SHIFT
+			| 0x00000003U << DDRC_DFITMG1_DFI_T_WRDATA_DELAY_SHIFT
+			| 0x00000003U << DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_SHIFT
+			| 0x00000004U << DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG1_OFFSET ,0xF31F0F0FU ,0x00030304U);
+	/*############################################################################################################################ */
+
+		/*Register : DFILPCFG0 @ 0XFD070198

+
+		Setting for DFI's tlp_resp time. Same value is used for both Power Down, Self Refresh, Deep Power Down and Maximum Power Savi
+		g modes. DFI 2.1 specification onwards, recommends using a fixed value of 7 always.
+		PSU_DDRC_DFILPCFG0_DFI_TLP_RESP                                                 0x7
+
+		Value to drive on dfi_lp_wakeup signal when Deep Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16
+		cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7
+		- 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 
+		31072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting mDDR or LPDDR2/LPDDR3 device
+		.
+		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD                                            0x0
+
+		Enables DFI Low Power interface handshaking during Deep Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled This is only pres
+		nt for designs supporting mDDR or LPDDR2/LPDDR3 devices.
+		PSU_DDRC_DFILPCFG0_DFI_LP_EN_DPD                                                0x0
+
+		Value to drive on dfi_lp_wakeup signal when Self Refresh mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cy
+		les - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 
+		048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 131
+		72 cycles - 0xE - 262144 cycles - 0xF - Unlimited
+		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR                                             0x0
+
+		Enables DFI Low Power interface handshaking during Self Refresh Entry/Exit. - 0 - Disabled - 1 - Enabled
+		PSU_DDRC_DFILPCFG0_DFI_LP_EN_SR                                                 0x1
+
+		Value to drive on dfi_lp_wakeup signal when Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cycl
+		s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20
+		8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107
+		 cycles - 0xE - 262144 cycles - 0xF - Unlimited
+		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD                                             0x4
+
+		Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled
+		PSU_DDRC_DFILPCFG0_DFI_LP_EN_PD                                                 0x1
+
+		DFI Low Power Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070198, 0x0FF1F1F1U ,0x07000141U)  
+		RegMask = (DDRC_DFILPCFG0_DFI_TLP_RESP_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK | DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT
+			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_SHIFT
+			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT
+			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT
+			| 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT
+			| 0x00000004U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT
+			| 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFILPCFG0_OFFSET ,0x0FF1F1F1U ,0x07000141U);
+	/*############################################################################################################################ */
+
+		/*Register : DFILPCFG1 @ 0XFD07019C

+
+		Value to drive on dfi_lp_wakeup signal when Maximum Power Saving Mode is entered. Determines the DFI's tlp_wakeup time: - 0x0
+		- 16 cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles 
+		 0x7 - 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0
+		D - 131072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting DDR4 devices.
+		PSU_DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM                                           0x2
+
+		Enables DFI Low Power interface handshaking during Maximum Power Saving Mode Entry/Exit. - 0 - Disabled - 1 - Enabled This is
+		only present for designs supporting DDR4 devices.
+		PSU_DDRC_DFILPCFG1_DFI_LP_EN_MPSM                                               0x1
+
+		DFI Low Power Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD07019C, 0x000000F1U ,0x00000021U)  
+		RegMask = (DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_MASK | DDRC_DFILPCFG1_DFI_LP_EN_MPSM_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_SHIFT
+			| 0x00000001U << DDRC_DFILPCFG1_DFI_LP_EN_MPSM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFILPCFG1_OFFSET ,0x000000F1U ,0x00000021U);
+	/*############################################################################################################################ */
+
+		/*Register : DFIUPD1 @ 0XFD0701A4

+
+		This is the minimum amount of time between uMCTL2 initiated DFI update requests (which is executed whenever the uMCTL2 is idl
+		). Set this number higher to reduce the frequency of update requests, which can have a small impact on the latency of the fir
+		t read request when the uMCTL2 is idle. Unit: 1024 clocks
+		PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024                               0x41
+
+		This is the maximum amount of time between uMCTL2 initiated DFI update requests. This timer resets with each update request; 
+		hen the timer expires dfi_ctrlupd_req is sent and traffic is blocked until the dfi_ctrlupd_ackx is received. PHY can use this
+		idle time to recalibrate the delay lines to the DLLs. The DFI controller update is also used to reset PHY FIFO pointers in ca
+		e of data capture errors. Updates are required to maintain calibration over PVT, but frequent updates may impact performance.
+		Note: Value programmed for DFIUPD1.dfi_t_ctrlupd_interval_max_x1024 must be greater than DFIUPD1.dfi_t_ctrlupd_interval_min_x
+		024. Unit: 1024 clocks
+		PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024                               0xe2
+
+		DFI Update Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0701A4, 0x00FF00FFU ,0x004100E2U)  
+		RegMask = (DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_MASK | DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_MASK |  0 );
+
+		RegVal = ((0x00000041U << DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_SHIFT
+			| 0x000000E2U << DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFIUPD1_OFFSET ,0x00FF00FFU ,0x004100E2U);
+	/*############################################################################################################################ */
+
+		/*Register : DFIMISC @ 0XFD0701B0

+
+		Defines polarity of dfi_wrdata_cs and dfi_rddata_cs signals. - 0: Signals are active low - 1: Signals are active high
+		PSU_DDRC_DFIMISC_DFI_DATA_CS_POLARITY                                           0x0
+
+		DBI implemented in DDRC or PHY. - 0 - DDRC implements DBI functionality. - 1 - PHY implements DBI functionality. Present only
+		in designs configured to support DDR4 and LPDDR4.
+		PSU_DDRC_DFIMISC_PHY_DBI_MODE                                                   0x0
+
+		PHY initialization complete enable signal. When asserted the dfi_init_complete signal can be used to trigger SDRAM initialisa
+		ion
+		PSU_DDRC_DFIMISC_DFI_INIT_COMPLETE_EN                                           0x0
+
+		DFI Miscellaneous Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0701B0, 0x00000007U ,0x00000000U)  
+		RegMask = (DDRC_DFIMISC_DFI_DATA_CS_POLARITY_MASK | DDRC_DFIMISC_PHY_DBI_MODE_MASK | DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DFIMISC_DFI_DATA_CS_POLARITY_SHIFT
+			| 0x00000000U << DDRC_DFIMISC_PHY_DBI_MODE_SHIFT
+			| 0x00000000U << DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFIMISC_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG2 @ 0XFD0701B4

+
+		>Number of clocks between when a read command is sent on the DFI control interface and when the associated dfi_rddata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_rdcslat. Refer to PHY specification for correct value.
+		PSU_DDRC_DFITMG2_DFI_TPHY_RDCSLAT                                               0x9
+
+		Number of clocks between when a write command is sent on the DFI control interface and when the associated dfi_wrdata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_wrcslat. Refer to PHY specification for correct value.
+		PSU_DDRC_DFITMG2_DFI_TPHY_WRCSLAT                                               0x6
+
+		DFI Timing Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0701B4, 0x00003F3FU ,0x00000906U)  
+		RegMask = (DDRC_DFITMG2_DFI_TPHY_RDCSLAT_MASK | DDRC_DFITMG2_DFI_TPHY_WRCSLAT_MASK |  0 );
+
+		RegVal = ((0x00000009U << DDRC_DFITMG2_DFI_TPHY_RDCSLAT_SHIFT
+			| 0x00000006U << DDRC_DFITMG2_DFI_TPHY_WRCSLAT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG2_OFFSET ,0x00003F3FU ,0x00000906U);
+	/*############################################################################################################################ */
+
+		/*Register : DBICTL @ 0XFD0701C0

+
+		Read DBI enable signal in DDRC. - 0 - Read DBI is disabled. - 1 - Read DBI is enabled. This signal must be set the same value
+		as DRAM's mode register. - DDR4: MR5 bit A12. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[6]
+		PSU_DDRC_DBICTL_RD_DBI_EN                                                       0x0
+
+		Write DBI enable signal in DDRC. - 0 - Write DBI is disabled. - 1 - Write DBI is enabled. This signal must be set the same va
+		ue as DRAM's mode register. - DDR4: MR5 bit A11. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[7]
+		PSU_DDRC_DBICTL_WR_DBI_EN                                                       0x0
+
+		DM enable signal in DDRC. - 0 - DM is disabled. - 1 - DM is enabled. This signal must be set the same logical value as DRAM's
+		mode register. - DDR4: Set this to same value as MR5 bit A10. When x4 devices are used, this signal must be set to 0. - LPDDR
+		: Set this to inverted value of MR13[5] which is opposite polarity from this signal
+		PSU_DDRC_DBICTL_DM_EN                                                           0x1
+
+		DM/DBI Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0701C0, 0x00000007U ,0x00000001U)  
+		RegMask = (DDRC_DBICTL_RD_DBI_EN_MASK | DDRC_DBICTL_WR_DBI_EN_MASK | DDRC_DBICTL_DM_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DBICTL_RD_DBI_EN_SHIFT
+			| 0x00000000U << DDRC_DBICTL_WR_DBI_EN_SHIFT
+			| 0x00000001U << DDRC_DBICTL_DM_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DBICTL_OFFSET ,0x00000007U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP0 @ 0XFD070200

+
+		Selects the HIF address bit used as rank address bit 0. Valid Range: 0 to 27, and 31 Internal Base: 6 The selected HIF addres
+		 bit is determined by adding the internal base to the value of this field. If set to 31, rank address bit 0 is set to 0.
+		PSU_DDRC_ADDRMAP0_ADDRMAP_CS_BIT0                                               0x1f
+
+		Address Map Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070200, 0x0000001FU ,0x0000001FU)  
+		RegMask = (DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_MASK |  0 );
+
+		RegVal = ((0x0000001FU << DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP0_OFFSET ,0x0000001FU ,0x0000001FU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP1 @ 0XFD070204

+
+		Selects the HIF address bit used as bank address bit 2. Valid Range: 0 to 29 and 31 Internal Base: 4 The selected HIF address
+		bit is determined by adding the internal base to the value of this field. If set to 31, bank address bit 2 is set to 0.
+		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B2                                               0x1f
+
+		Selects the HIF address bits used as bank address bit 1. Valid Range: 0 to 30 Internal Base: 3 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B1                                               0xa
+
+		Selects the HIF address bits used as bank address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B0                                               0xa
+
+		Address Map Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070204, 0x001F1F1FU ,0x001F0A0AU)  
+		RegMask = (DDRC_ADDRMAP1_ADDRMAP_BANK_B2_MASK | DDRC_ADDRMAP1_ADDRMAP_BANK_B1_MASK | DDRC_ADDRMAP1_ADDRMAP_BANK_B0_MASK |  0 );
+
+		RegVal = ((0x0000001FU << DDRC_ADDRMAP1_ADDRMAP_BANK_B2_SHIFT
+			| 0x0000000AU << DDRC_ADDRMAP1_ADDRMAP_BANK_B1_SHIFT
+			| 0x0000000AU << DDRC_ADDRMAP1_ADDRMAP_BANK_B0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP1_OFFSET ,0x001F1F1FU ,0x001F0A0AU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP2 @ 0XFD070208

+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 5. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 6. - Quarter bus width mode: Selects the HIF address bit used as column address bit 7 . Vali
+		 Range: 0 to 7, and 15 Internal Base: 5 The selected HIF address bit is determined by adding the internal base to the value o
+		 this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B5                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 4. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 5. - Quarter bus width mode: Selects the HIF address bit used as column address bit 6. Valid
+		Range: 0 to 7, and 15 Internal Base: 4 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B4                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 3. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 4. - Quarter bus width mode: Selects the HIF address bit used as column address bit 5. Valid
+		Range: 0 to 7 Internal Base: 3 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=16, it is required to program this to 0, hence register does not exist i
+		 this case.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B3                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 2. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 3. - Quarter bus width mode: Selects the HIF address bit used as column address bit 4. Valid
+		Range: 0 to 7 Internal Base: 2 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=8 or 16, it is required to program this to 0.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B2                                                0x0
+
+		Address Map Register 2
+		(OFFSET, MASK, VALUE)      (0XFD070208, 0x0F0F0F0FU ,0x00000000U)  
+		RegMask = (DDRC_ADDRMAP2_ADDRMAP_COL_B5_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B4_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B3_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B2_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B5_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B4_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B3_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP2_OFFSET ,0x0F0F0F0FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP3 @ 0XFD07020C

+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 9. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: Selects the HIF address bit used as
+		column address bit 13 (11 in LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 9 The selected HIF address bit i
+		 determined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: 
+		er JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source addr
+		ss bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus an
+		 hence column bit 10 is used.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B9                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 8. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 9. - Quarter bus width mode: Selects the HIF address bit used as column address bit 11 (10 i
+		 LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 8 The selected HIF address bit is determined by adding the i
+		ternal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specif
+		cation, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to col
+		mn address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is use
+		.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B8                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 7. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 8. - Quarter bus width mode: Selects the HIF address bit used as column address bit 9. Valid
+		Range: 0 to 7, and 15 Internal Base: 7 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B7                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 6. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 7. - Quarter bus width mode: Selects the HIF address bit used as column address bit 8. Valid
+		Range: 0 to 7, and 15 Internal Base: 6 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B6                                                0x0
+
+		Address Map Register 3
+		(OFFSET, MASK, VALUE)      (0XFD07020C, 0x0F0F0F0FU ,0x00000000U)  
+		RegMask = (DDRC_ADDRMAP3_ADDRMAP_COL_B9_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B8_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B7_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B6_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B9_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B8_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B7_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B6_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP3_OFFSET ,0x0F0F0F0FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP4 @ 0XFD070210

+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Unused. To make it unused, this should be tied to 4'hF. - Quarter bus width mode: Unused. To make it unused, this must 
+		e tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 11 The selected HIF address bit is determined by adding the intern
+		l base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specificati
+		n, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to column a
+		dress bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is used.
+		PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B11                                               0xf
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: UNUSED.
+		To make it unused, this must be tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 10 The selected HIF address bit is d
+		termined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per
+		JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source address
+		bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and h
+		nce column bit 10 is used.
+		PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B10                                               0xf
+
+		Address Map Register 4
+		(OFFSET, MASK, VALUE)      (0XFD070210, 0x00000F0FU ,0x00000F0FU)  
+		RegMask = (DDRC_ADDRMAP4_ADDRMAP_COL_B11_MASK | DDRC_ADDRMAP4_ADDRMAP_COL_B10_MASK |  0 );
+
+		RegVal = ((0x0000000FU << DDRC_ADDRMAP4_ADDRMAP_COL_B11_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP4_ADDRMAP_COL_B10_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP4_OFFSET ,0x00000F0FU ,0x00000F0FU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP5 @ 0XFD070214

+
+		Selects the HIF address bit used as row address bit 11. Valid Range: 0 to 11, and 15 Internal Base: 17 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 11 is set to 0.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B11                                               0x8
+
+		Selects the HIF address bits used as row address bits 2 to 10. Valid Range: 0 to 11, and 15 Internal Base: 8 (for row address
+		bit 2), 9 (for row address bit 3), 10 (for row address bit 4) etc increasing to 16 (for row address bit 10) The selected HIF 
+		ddress bit for each of the row address bits is determined by adding the internal base to the value of this field. When value 
+		5 is used the values of row address bits 2 to 10 are defined by registers ADDRMAP9, ADDRMAP10, ADDRMAP11.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10                                             0xf
+
+		Selects the HIF address bits used as row address bit 1. Valid Range: 0 to 11 Internal Base: 7 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B1                                                0x8
+
+		Selects the HIF address bits used as row address bit 0. Valid Range: 0 to 11 Internal Base: 6 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B0                                                0x8
+
+		Address Map Register 5
+		(OFFSET, MASK, VALUE)      (0XFD070214, 0x0F0F0F0FU ,0x080F0808U)  
+		RegMask = (DDRC_ADDRMAP5_ADDRMAP_ROW_B11_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B1_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B0_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B11_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B1_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP5_OFFSET ,0x0F0F0F0FU ,0x080F0808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP6 @ 0XFD070218

+
+		Set this to 1 if there is an LPDDR3 SDRAM 6Gb or 12Gb device in use. - 1 - LPDDR3 SDRAM 6Gb/12Gb device in use. Every address
+		having row[14:13]==2'b11 is considered as invalid - 0 - non-LPDDR3 6Gb/12Gb device in use. All addresses are valid Present on
+		y in designs configured to support LPDDR3.
+		PSU_DDRC_ADDRMAP6_LPDDR3_6GB_12GB                                               0x0
+
+		Selects the HIF address bit used as row address bit 15. Valid Range: 0 to 11, and 15 Internal Base: 21 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 15 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B15                                               0xf
+
+		Selects the HIF address bit used as row address bit 14. Valid Range: 0 to 11, and 15 Internal Base: 20 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 14 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B14                                               0x8
+
+		Selects the HIF address bit used as row address bit 13. Valid Range: 0 to 11, and 15 Internal Base: 19 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 13 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B13                                               0x8
+
+		Selects the HIF address bit used as row address bit 12. Valid Range: 0 to 11, and 15 Internal Base: 18 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 12 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B12                                               0x8
+
+		Address Map Register 6
+		(OFFSET, MASK, VALUE)      (0XFD070218, 0x8F0F0F0FU ,0x0F080808U)  
+		RegMask = (DDRC_ADDRMAP6_LPDDR3_6GB_12GB_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B15_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B14_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B13_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B12_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ADDRMAP6_LPDDR3_6GB_12GB_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP6_ADDRMAP_ROW_B15_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B14_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B13_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B12_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP6_OFFSET ,0x8F0F0F0FU ,0x0F080808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP7 @ 0XFD07021C

+
+		Selects the HIF address bit used as row address bit 17. Valid Range: 0 to 10, and 15 Internal Base: 23 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 17 is set to 0.
+		PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B17                                               0xf
+
+		Selects the HIF address bit used as row address bit 16. Valid Range: 0 to 11, and 15 Internal Base: 22 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 16 is set to 0.
+		PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B16                                               0xf
+
+		Address Map Register 7
+		(OFFSET, MASK, VALUE)      (0XFD07021C, 0x00000F0FU ,0x00000F0FU)  
+		RegMask = (DDRC_ADDRMAP7_ADDRMAP_ROW_B17_MASK | DDRC_ADDRMAP7_ADDRMAP_ROW_B16_MASK |  0 );
+
+		RegVal = ((0x0000000FU << DDRC_ADDRMAP7_ADDRMAP_ROW_B17_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP7_ADDRMAP_ROW_B16_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP7_OFFSET ,0x00000F0FU ,0x00000F0FU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP8 @ 0XFD070220

+
+		Selects the HIF address bits used as bank group address bit 1. Valid Range: 0 to 30, and 31 Internal Base: 3 The selected HIF
+		address bit for each of the bank group address bits is determined by adding the internal base to the value of this field. If 
+		et to 31, bank group address bit 1 is set to 0.
+		PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B1                                                 0x8
+
+		Selects the HIF address bits used as bank group address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address
+		bit for each of the bank group address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B0                                                 0x8
+
+		Address Map Register 8
+		(OFFSET, MASK, VALUE)      (0XFD070220, 0x00001F1FU ,0x00000808U)  
+		RegMask = (DDRC_ADDRMAP8_ADDRMAP_BG_B1_MASK | DDRC_ADDRMAP8_ADDRMAP_BG_B0_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP8_ADDRMAP_BG_B1_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP8_ADDRMAP_BG_B0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP8_OFFSET ,0x00001F1FU ,0x00000808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP9 @ 0XFD070224

+
+		Selects the HIF address bits used as row address bit 5. Valid Range: 0 to 11 Internal Base: 11 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B5                                                0x8
+
+		Selects the HIF address bits used as row address bit 4. Valid Range: 0 to 11 Internal Base: 10 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B4                                                0x8
+
+		Selects the HIF address bits used as row address bit 3. Valid Range: 0 to 11 Internal Base: 9 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B3                                                0x8
+
+		Selects the HIF address bits used as row address bit 2. Valid Range: 0 to 11 Internal Base: 8 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B2                                                0x8
+
+		Address Map Register 9
+		(OFFSET, MASK, VALUE)      (0XFD070224, 0x0F0F0F0FU ,0x08080808U)  
+		RegMask = (DDRC_ADDRMAP9_ADDRMAP_ROW_B5_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B4_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B3_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B2_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B5_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B4_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B3_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP9_OFFSET ,0x0F0F0F0FU ,0x08080808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP10 @ 0XFD070228

+
+		Selects the HIF address bits used as row address bit 9. Valid Range: 0 to 11 Internal Base: 15 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B9                                               0x8
+
+		Selects the HIF address bits used as row address bit 8. Valid Range: 0 to 11 Internal Base: 14 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B8                                               0x8
+
+		Selects the HIF address bits used as row address bit 7. Valid Range: 0 to 11 Internal Base: 13 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B7                                               0x8
+
+		Selects the HIF address bits used as row address bit 6. Valid Range: 0 to 11 Internal Base: 12 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B6                                               0x8
+
+		Address Map Register 10
+		(OFFSET, MASK, VALUE)      (0XFD070228, 0x0F0F0F0FU ,0x08080808U)  
+		RegMask = (DDRC_ADDRMAP10_ADDRMAP_ROW_B9_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B8_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B7_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B6_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B9_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B8_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B7_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B6_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP10_OFFSET ,0x0F0F0F0FU ,0x08080808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP11 @ 0XFD07022C

+
+		Selects the HIF address bits used as row address bit 10. Valid Range: 0 to 11 Internal Base: 16 The selected HIF address bit 
+		or each of the row address bits is determined by adding the internal base to the value of this field. This register field is 
+		sed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP11_ADDRMAP_ROW_B10                                              0x8
+
+		Address Map Register 11
+		(OFFSET, MASK, VALUE)      (0XFD07022C, 0x0000000FU ,0x00000008U)  
+		RegMask = (DDRC_ADDRMAP11_ADDRMAP_ROW_B10_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP11_ADDRMAP_ROW_B10_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP11_OFFSET ,0x0000000FU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : ODTCFG @ 0XFD070240

+
+		Cycles to hold ODT for a write command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x5 (DDR2-400/533/
+		67), 0x6 (DDR2-800), 0x7 (DDR2-1066) - BL4: 0x3 (DDR2-400/533/667), 0x4 (DDR2-800), 0x5 (DDR2-1066) DDR3: - BL8: 0x6 DDR4: - 
+		L8: 5 + WR_PREAMBLE + CRC_MODE WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) CRC_MODE = 0 (not CRC mode), 1 
+		CRC mode) LPDDR3: - BL8: 7 + RU(tODTon(max)/tCK)
+		PSU_DDRC_ODTCFG_WR_ODT_HOLD                                                     0x6
+
+		The delay, in clock cycles, from issuing a write command to setting ODT values associated with that command. ODT setting must
+		remain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CWL + AL - 3 (DDR2-400/533/
+		67), CWL + AL - 4 (DDR2-800), CWL + AL - 5 (DDR2-1066) If (CWL + AL - 3 < 0), uMCTL2 does not support ODT for write operation
+		 DDR3: - 0x0 DDR4: - DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) LPDDR3: - WL - 1 - RU(tODTon(max)/tCK))
+		PSU_DDRC_ODTCFG_WR_ODT_DELAY                                                    0x0
+
+		Cycles to hold ODT for a read command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x6 (not DDR2-1066)
+		 0x7 (DDR2-1066) - BL4: 0x4 (not DDR2-1066), 0x5 (DDR2-1066) DDR3: - BL8 - 0x6 DDR4: - BL8: 5 + RD_PREAMBLE RD_PREAMBLE = 1 (
+		tCK write preamble), 2 (2tCK write preamble) LPDDR3: - BL8: 5 + RU(tDQSCK(max)/tCK) - RD(tDQSCK(min)/tCK) + RU(tODTon(max)/tC
+		)
+		PSU_DDRC_ODTCFG_RD_ODT_HOLD                                                     0x6
+
+		The delay, in clock cycles, from issuing a read command to setting ODT values associated with that command. ODT setting must 
+		emain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CL + AL - 4 (not DDR2-1066),
+		CL + AL - 5 (DDR2-1066) If (CL + AL - 4 < 0), uMCTL2 does not support ODT for read operation. DDR3: - CL - CWL DDR4: - CL - C
+		L - RD_PREAMBLE + WR_PREAMBLE + DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK
+		write preamble) RD_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) If (CL - CWL - RD_PREAMBLE + WR_PREAMBLE) < 0,
+		uMCTL2 does not support ODT for read operation. LPDDR3: - RL + RD(tDQSCK(min)/tCK) - 1 - RU(tODTon(max)/tCK)
+		PSU_DDRC_ODTCFG_RD_ODT_DELAY                                                    0x0
+
+		ODT Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD070240, 0x0F1F0F7CU ,0x06000600U)  
+		RegMask = (DDRC_ODTCFG_WR_ODT_HOLD_MASK | DDRC_ODTCFG_WR_ODT_DELAY_MASK | DDRC_ODTCFG_RD_ODT_HOLD_MASK | DDRC_ODTCFG_RD_ODT_DELAY_MASK |  0 );
+
+		RegVal = ((0x00000006U << DDRC_ODTCFG_WR_ODT_HOLD_SHIFT
+			| 0x00000000U << DDRC_ODTCFG_WR_ODT_DELAY_SHIFT
+			| 0x00000006U << DDRC_ODTCFG_RD_ODT_HOLD_SHIFT
+			| 0x00000000U << DDRC_ODTCFG_RD_ODT_DELAY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ODTCFG_OFFSET ,0x0F1F0F7CU ,0x06000600U);
+	/*############################################################################################################################ */
+
+		/*Register : ODTMAP @ 0XFD070244

+
+		Indicates which remote ODTs must be turned on during a read from rank 1. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
+		PSU_DDRC_ODTMAP_RANK1_RD_ODT                                                    0x0
+
+		Indicates which remote ODTs must be turned on during a write to rank 1. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
+		PSU_DDRC_ODTMAP_RANK1_WR_ODT                                                    0x0
+
+		Indicates which remote ODTs must be turned on during a read from rank 0. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT.
+		PSU_DDRC_ODTMAP_RANK0_RD_ODT                                                    0x0
+
+		Indicates which remote ODTs must be turned on during a write to rank 0. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT.
+		PSU_DDRC_ODTMAP_RANK0_WR_ODT                                                    0x1
+
+		ODT/Rank Map Register
+		(OFFSET, MASK, VALUE)      (0XFD070244, 0x00003333U ,0x00000001U)  
+		RegMask = (DDRC_ODTMAP_RANK1_RD_ODT_MASK | DDRC_ODTMAP_RANK1_WR_ODT_MASK | DDRC_ODTMAP_RANK0_RD_ODT_MASK | DDRC_ODTMAP_RANK0_WR_ODT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ODTMAP_RANK1_RD_ODT_SHIFT
+			| 0x00000000U << DDRC_ODTMAP_RANK1_WR_ODT_SHIFT
+			| 0x00000000U << DDRC_ODTMAP_RANK0_RD_ODT_SHIFT
+			| 0x00000001U << DDRC_ODTMAP_RANK0_WR_ODT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ODTMAP_OFFSET ,0x00003333U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : SCHED @ 0XFD070250

+
+		When the preferred transaction store is empty for these many clock cycles, switch to the alternate transaction store if it is
+		non-empty. The read transaction store (both high and low priority) is the default preferred transaction store and the write t
+		ansaction store is the alternative store. When prefer write over read is set this is reversed. 0x0 is a legal value for this 
+		egister. When set to 0x0, the transaction store switching will happen immediately when the switching conditions become true. 
+		OR PERFORMANCE ONLY
+		PSU_DDRC_SCHED_RDWR_IDLE_GAP                                                    0x1
+
+		UNUSED
+		PSU_DDRC_SCHED_GO2CRITICAL_HYSTERESIS                                           0x0
+
+		Number of entries in the low priority transaction store is this value + 1. (MEMC_NO_OF_ENTRY - (SCHED.lpr_num_entries + 1)) i
+		 the number of entries available for the high priority transaction store. Setting this to maximum value allocates all entries
+		to low priority transaction store. Setting this to 0 allocates 1 entry to low priority transaction store and the rest to high
+		priority transaction store. Note: In ECC configurations, the numbers of write and low priority read credits issued is one les
+		 than in the non-ECC case. One entry each is reserved in the write and low-priority read CAMs for storing the RMW requests ar
+		sing out of single bit error correction RMW operation.
+		PSU_DDRC_SCHED_LPR_NUM_ENTRIES                                                  0x20
+
+		If true, bank is kept open only while there are page hit transactions available in the CAM to that bank. The last read or wri
+		e command in the CAM with a bank and page hit will be executed with auto-precharge if SCHED1.pageclose_timer=0. Even if this 
+		egister set to 1 and SCHED1.pageclose_timer is set to 0, explicit precharge (and not auto-precharge) may be issued in some ca
+		es where there is a mode switch between Write and Read or between LPR and HPR. The Read and Write commands that are executed 
+		s part of the ECC scrub requests are also executed without auto-precharge. If false, the bank remains open until there is a n
+		ed to close it (to open a different page, or for page timeout or refresh timeout) - also known as open page policy. The open 
+		age policy can be overridden by setting the per-command-autopre bit on the HIF interface (hif_cmd_autopre). The pageclose fea
+		ure provids a midway between Open and Close page policies. FOR PERFORMANCE ONLY.
+		PSU_DDRC_SCHED_PAGECLOSE                                                        0x0
+
+		If set then the bank selector prefers writes over reads. FOR DEBUG ONLY.
+		PSU_DDRC_SCHED_PREFER_WRITE                                                     0x0
+
+		Active low signal. When asserted ('0'), all incoming transactions are forced to low priority. This implies that all High Prio
+		ity Read (HPR) and Variable Priority Read commands (VPR) will be treated as Low Priority Read (LPR) commands. On the write si
+		e, all Variable Priority Write (VPW) commands will be treated as Normal Priority Write (NPW) commands. Forcing the incoming t
+		ansactions to low priority implicitly turns off Bypass path for read commands. FOR PERFORMANCE ONLY.
+		PSU_DDRC_SCHED_FORCE_LOW_PRI_N                                                  0x1
+
+		Scheduler Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070250, 0x7FFF3F07U ,0x01002001U)  
+		RegMask = (DDRC_SCHED_RDWR_IDLE_GAP_MASK | DDRC_SCHED_GO2CRITICAL_HYSTERESIS_MASK | DDRC_SCHED_LPR_NUM_ENTRIES_MASK | DDRC_SCHED_PAGECLOSE_MASK | DDRC_SCHED_PREFER_WRITE_MASK | DDRC_SCHED_FORCE_LOW_PRI_N_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_SCHED_RDWR_IDLE_GAP_SHIFT
+			| 0x00000000U << DDRC_SCHED_GO2CRITICAL_HYSTERESIS_SHIFT
+			| 0x00000020U << DDRC_SCHED_LPR_NUM_ENTRIES_SHIFT
+			| 0x00000000U << DDRC_SCHED_PAGECLOSE_SHIFT
+			| 0x00000000U << DDRC_SCHED_PREFER_WRITE_SHIFT
+			| 0x00000001U << DDRC_SCHED_FORCE_LOW_PRI_N_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SCHED_OFFSET ,0x7FFF3F07U ,0x01002001U);
+	/*############################################################################################################################ */
+
+		/*Register : PERFLPR1 @ 0XFD070264

+
+		Number of transactions that are serviced once the LPR queue goes critical is the smaller of: - (a) This number - (b) Number o
+		 transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH                                           0x8
+
+		Number of clocks that the LPR queue can be starved before it goes critical. The minimum valid functional value for this regis
+		er is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not
+		be disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFLPR1_LPR_MAX_STARVE                                                0x40
+
+		Low Priority Read CAM Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070264, 0xFF00FFFFU ,0x08000040U)  
+		RegMask = (DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_MASK | DDRC_PERFLPR1_LPR_MAX_STARVE_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_SHIFT
+			| 0x00000040U << DDRC_PERFLPR1_LPR_MAX_STARVE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PERFLPR1_OFFSET ,0xFF00FFFFU ,0x08000040U);
+	/*############################################################################################################################ */
+
+		/*Register : PERFWR1 @ 0XFD07026C

+
+		Number of transactions that are serviced once the WR queue goes critical is the smaller of: - (a) This number - (b) Number of
+		transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFWR1_W_XACT_RUN_LENGTH                                              0x8
+
+		Number of clocks that the WR queue can be starved before it goes critical. The minimum valid functional value for this regist
+		r is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not 
+		e disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFWR1_W_MAX_STARVE                                                   0x40
+
+		Write CAM Register 1
+		(OFFSET, MASK, VALUE)      (0XFD07026C, 0xFF00FFFFU ,0x08000040U)  
+		RegMask = (DDRC_PERFWR1_W_XACT_RUN_LENGTH_MASK | DDRC_PERFWR1_W_MAX_STARVE_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_PERFWR1_W_XACT_RUN_LENGTH_SHIFT
+			| 0x00000040U << DDRC_PERFWR1_W_MAX_STARVE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PERFWR1_OFFSET ,0xFF00FFFFU ,0x08000040U);
+	/*############################################################################################################################ */
+
+		/*Register : DQMAP5 @ 0XFD070294

+
+		All even ranks have the same DQ mapping controled by DQMAP0-4 register as rank 0. This register provides DQ swap function for
+		all odd ranks to support CRC feature. rank based DQ swapping is: swap bit 0 with 1, swap bit 2 with 3, swap bit 4 with 5 and 
+		wap bit 6 with 7. 1: Disable rank based DQ swapping 0: Enable rank based DQ swapping Present only in designs configured to su
+		port DDR4.
+		PSU_DDRC_DQMAP5_DIS_DQ_RANK_SWAP                                                0x1
+
+		DQ Map Register 5
+		(OFFSET, MASK, VALUE)      (0XFD070294, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_DQMAP5_DIS_DQ_RANK_SWAP_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_DQMAP5_DIS_DQ_RANK_SWAP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DQMAP5_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG0 @ 0XFD070300

+
+		When this is set to '0', auto-precharge is disabled for the flushed command in a collision case. Collision cases are write fo
+		lowed by read to same address, read followed by write to same address, or write followed by write to same address with DBG0.d
+		s_wc bit = 1 (where same address comparisons exclude the two address bits representing critical word). FOR DEBUG ONLY.
+		PSU_DDRC_DBG0_DIS_COLLISION_PAGE_OPT                                            0x0
+
+		When 1, disable write combine. FOR DEBUG ONLY
+		PSU_DDRC_DBG0_DIS_WC                                                            0x0
+
+		Debug Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070300, 0x00000011U ,0x00000000U)  
+		RegMask = (DDRC_DBG0_DIS_COLLISION_PAGE_OPT_MASK | DDRC_DBG0_DIS_WC_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DBG0_DIS_COLLISION_PAGE_OPT_SHIFT
+			| 0x00000000U << DDRC_DBG0_DIS_WC_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DBG0_OFFSET ,0x00000011U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DBGCMD @ 0XFD07030C

+
+		Setting this register bit to 1 allows refresh and ZQCS commands to be triggered from hardware via the IOs ext_*. If set to 1,
+		the fields DBGCMD.zq_calib_short and DBGCMD.rank*_refresh have no function, and are ignored by the uMCTL2 logic. Setting this
+		register bit to 0 allows refresh and ZQCS to be triggered from software, via the fields DBGCMD.zq_calib_short and DBGCMD.rank
+		_refresh. If set to 0, the hardware pins ext_* have no function, and are ignored by the uMCTL2 logic. This register is static
+		 and may only be changed when the DDRC reset signal, core_ddrc_rstn, is asserted (0).
+		PSU_DDRC_DBGCMD_HW_REF_ZQ_EN                                                    0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a dfi_ctrlupd_req to the PHY. When this request is stored in 
+		he uMCTL2, the bit is automatically cleared. This operation must only be performed when DFIUPD0.dis_auto_ctrlupd=1.
+		PSU_DDRC_DBGCMD_CTRLUPD                                                         0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a ZQCS (ZQ calibration short)/MPC(ZQ calibration) command to 
+		he SDRAM. When this request is stored in the uMCTL2, the bit is automatically cleared. This operation can be performed only w
+		en ZQCTL0.dis_auto_zq=1. It is recommended NOT to set this register bit if in Init operating mode. This register bit is ignor
+		d when in Self-Refresh(except LPDDR4) and SR-Powerdown(LPDDR4) and Deep power-down operating modes and Maximum Power Saving M
+		de.
+		PSU_DDRC_DBGCMD_ZQ_CALIB_SHORT                                                  0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 1. Writing to this bit causes DBGSTAT.rank1
+		refresh_busy to be set. When DBGSTAT.rank1_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.
+		PSU_DDRC_DBGCMD_RANK1_REFRESH                                                   0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 0. Writing to this bit causes DBGSTAT.rank0
+		refresh_busy to be set. When DBGSTAT.rank0_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.
+		PSU_DDRC_DBGCMD_RANK0_REFRESH                                                   0x0
+
+		Command Debug Register
+		(OFFSET, MASK, VALUE)      (0XFD07030C, 0x80000033U ,0x00000000U)  
+		RegMask = (DDRC_DBGCMD_HW_REF_ZQ_EN_MASK | DDRC_DBGCMD_CTRLUPD_MASK | DDRC_DBGCMD_ZQ_CALIB_SHORT_MASK | DDRC_DBGCMD_RANK1_REFRESH_MASK | DDRC_DBGCMD_RANK0_REFRESH_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DBGCMD_HW_REF_ZQ_EN_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_CTRLUPD_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_ZQ_CALIB_SHORT_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_RANK1_REFRESH_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_RANK0_REFRESH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DBGCMD_OFFSET ,0x80000033U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SWCTL @ 0XFD070320

+
+		Enable quasi-dynamic register programming outside reset. Program register to 0 to enable quasi-dynamic programming. Set back 
+		egister to 1 once programming is done.
+		PSU_DDRC_SWCTL_SW_DONE                                                          0x0
+
+		Software register programming control enable
+		(OFFSET, MASK, VALUE)      (0XFD070320, 0x00000001U ,0x00000000U)  
+		RegMask = (DDRC_SWCTL_SW_DONE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_SWCTL_SW_DONE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SWCTL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCCFG @ 0XFD070400

+
+		Burst length expansion mode. By default (i.e. bl_exp_mode==0) XPI expands every AXI burst into multiple HIF commands, using t
+		e memory burst length as a unit. If set to 1, then XPI will use half of the memory burst length as a unit. This applies to bo
+		h reads and writes. When MSTR.data_bus_width==00, setting bl_exp_mode to 1 has no effect. This can be used in cases where Par
+		ial Writes is enabled (UMCTL2_PARTIAL_WR=1) and DBG0.dis_wc=1, in order to avoid or minimize t_ccd_l penalty in DDR4 and t_cc
+		_mw penalty in LPDDR4. Note that if DBICTL.reg_ddrc_dm_en=0, functionality is not supported in the following cases: - UMCTL2_
+		ARTIAL_WR=0 - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=8 and MSTR.reg_ddrc_burst_rdwr=1000 (LP
+		DR4 only) - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=4 and MSTR.reg_ddrc_burst_rdwr=0100 (DDR4
+		only), with either MSTR.reg_ddrc_burstchop=0 or CRCPARCTL1.reg_ddrc_crc_enable=1 Functionality is also not supported if Share
+		-AC is enabled
+		PSU_DDRC_PCCFG_BL_EXP_MODE                                                      0x0
+
+		Page match four limit. If set to 1, limits the number of consecutive same page DDRC transactions that can be granted by the P
+		rt Arbiter to four when Page Match feature is enabled. If set to 0, there is no limit imposed on number of consecutive same p
+		ge DDRC transactions.
+		PSU_DDRC_PCCFG_PAGEMATCH_LIMIT                                                  0x0
+
+		If set to 1 (enabled), sets co_gs_go2critical_wr and co_gs_go2critical_lpr/co_gs_go2critical_hpr signals going to DDRC based 
+		n urgent input (awurgent, arurgent) coming from AXI master. If set to 0 (disabled), co_gs_go2critical_wr and co_gs_go2critica
+		_lpr/co_gs_go2critical_hpr signals at DDRC are driven to 1b'0.
+		PSU_DDRC_PCCFG_GO2CRITICAL_EN                                                   0x1
+
+		Port Common Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD070400, 0x00000111U ,0x00000001U)  
+		RegMask = (DDRC_PCCFG_BL_EXP_MODE_MASK | DDRC_PCCFG_PAGEMATCH_LIMIT_MASK | DDRC_PCCFG_GO2CRITICAL_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCCFG_BL_EXP_MODE_SHIFT
+			| 0x00000000U << DDRC_PCCFG_PAGEMATCH_LIMIT_SHIFT
+			| 0x00000001U << DDRC_PCCFG_GO2CRITICAL_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCCFG_OFFSET ,0x00000111U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_0 @ 0XFD070404

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_0_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_0_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_0_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070404, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_0_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_0_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_0_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_0_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_0_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_0_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_0_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_0 @ 0XFD070408

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_0_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_0_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_0_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070408, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_0_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_0_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_0_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_0_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_0_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_0_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_0_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_0 @ 0XFD070490

+
+		Enables port n.
+		PSU_DDRC_PCTRL_0_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070490, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_0_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_0_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_0_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_0 @ 0XFD070494

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION1                                            0x2
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1                                             0xb
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070494, 0x0033000FU ,0x0020000BU)  
+		RegMask = (DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_SHIFT
+			| 0x0000000BU << DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_0_OFFSET ,0x0033000FU ,0x0020000BU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_0 @ 0XFD070498

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB                                           0x0
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070498, 0x07FF07FFU ,0x00000000U)  
+		RegMask = (DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_0_OFFSET ,0x07FF07FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_1 @ 0XFD0704B4

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_1_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_1_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_1_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD0704B4, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_1_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_1_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_1_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_1_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_1_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_1_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_1_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_1 @ 0XFD0704B8

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_1_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_1_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_1_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD0704B8, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_1_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_1_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_1_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_1_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_1_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_1_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_1_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_1 @ 0XFD070540

+
+		Enables port n.
+		PSU_DDRC_PCTRL_1_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070540, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_1_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_1_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_1_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_1 @ 0XFD070544

+
+		This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION2                                            0x2
+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION1                                            0x0
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION0                                            0x0
+
+		Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2                                             0xb
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070544, 0x03330F0FU ,0x02000B03U)  
+		RegMask = (DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_SHIFT
+			| 0x0000000BU << DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_1_OFFSET ,0x03330F0FU ,0x02000B03U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_1 @ 0XFD070548

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB                                           0x0
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070548, 0x07FF07FFU ,0x00000000U)  
+		RegMask = (DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_1_OFFSET ,0x07FF07FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_2 @ 0XFD070564

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_2_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_2_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_2_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070564, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_2_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_2_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_2_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_2_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_2_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_2_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_2_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_2 @ 0XFD070568

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_2_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_2_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_2_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070568, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_2_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_2_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_2_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_2_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_2_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_2_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_2_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_2 @ 0XFD0705F0

+
+		Enables port n.
+		PSU_DDRC_PCTRL_2_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0705F0, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_2_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_2_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_2_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_2 @ 0XFD0705F4

+
+		This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION2                                            0x2
+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION1                                            0x0
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION0                                            0x0
+
+		Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2                                             0xb
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0705F4, 0x03330F0FU ,0x02000B03U)  
+		RegMask = (DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_SHIFT
+			| 0x0000000BU << DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_2_OFFSET ,0x03330F0FU ,0x02000B03U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_2 @ 0XFD0705F8

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB                                           0x0
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0705F8, 0x07FF07FFU ,0x00000000U)  
+		RegMask = (DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_2_OFFSET ,0x07FF07FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_3 @ 0XFD070614

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_3_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_3_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_3_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070614, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_3_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_3_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_3_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_3_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_3_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_3_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_3_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_3 @ 0XFD070618

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_3_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_3_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_3_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070618, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_3_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_3_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_3_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_3_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_3_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_3_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_3_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_3 @ 0XFD0706A0

+
+		Enables port n.
+		PSU_DDRC_PCTRL_3_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0706A0, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_3_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_3_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_3_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_3 @ 0XFD0706A4

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION1                                            0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0706A4, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_3_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_3 @ 0XFD0706A8

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0706A8, 0x07FF07FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x0000004FU << DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_3_OFFSET ,0x07FF07FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS0_3 @ 0XFD0706AC

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1                                           0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0                                           0x0
+
+		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.
+		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL                                             0x3
+
+		Port n Write QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0706AC, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS0_3_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS1_3 @ 0XFD0706B0

+
+		Specifies the timeout value for write transactions.
+		PSU_DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT                                           0x4f
+
+		Port n Write QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0706B0, 0x000007FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS1_3_OFFSET ,0x000007FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_4 @ 0XFD0706C4

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_4_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_4_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_4_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD0706C4, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_4_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_4_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_4_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_4_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_4_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_4_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_4_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_4 @ 0XFD0706C8

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_4_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_4_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_4_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD0706C8, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_4_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_4_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_4_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_4_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_4_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_4_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_4_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_4 @ 0XFD070750

+
+		Enables port n.
+		PSU_DDRC_PCTRL_4_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070750, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_4_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_4_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_4_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_4 @ 0XFD070754

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION1                                            0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070754, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_4_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_4 @ 0XFD070758

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070758, 0x07FF07FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x0000004FU << DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_4_OFFSET ,0x07FF07FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS0_4 @ 0XFD07075C

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1                                           0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0                                           0x0
+
+		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.
+		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL                                             0x3
+
+		Port n Write QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD07075C, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS0_4_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS1_4 @ 0XFD070760

+
+		Specifies the timeout value for write transactions.
+		PSU_DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT                                           0x4f
+
+		Port n Write QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070760, 0x000007FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS1_4_OFFSET ,0x000007FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_5 @ 0XFD070774

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_5_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_5_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_5_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070774, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_5_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_5_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_5_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_5_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_5_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_5_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_5_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_5 @ 0XFD070778

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_5_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_5_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_5_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070778, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_5_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_5_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_5_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_5_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_5_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_5_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_5_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_5 @ 0XFD070800

+
+		Enables port n.
+		PSU_DDRC_PCTRL_5_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070800, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_5_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_5_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_5_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_5 @ 0XFD070804

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION1                                            0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070804, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_5_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_5 @ 0XFD070808

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070808, 0x07FF07FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x0000004FU << DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_5_OFFSET ,0x07FF07FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS0_5 @ 0XFD07080C

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1                                           0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0                                           0x0
+
+		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.
+		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL                                             0x3
+
+		Port n Write QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD07080C, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS0_5_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS1_5 @ 0XFD070810

+
+		Specifies the timeout value for write transactions.
+		PSU_DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT                                           0x4f
+
+		Port n Write QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070810, 0x000007FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS1_5_OFFSET ,0x000007FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : SARBASE0 @ 0XFD070F04

+
+		Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
+		PSU_DDRC_SARBASE0_BASE_ADDR                                                     0x0
+
+		SAR Base Address Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F04, 0x000001FFU ,0x00000000U)  
+		RegMask = (DDRC_SARBASE0_BASE_ADDR_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_SARBASE0_BASE_ADDR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARBASE0_OFFSET ,0x000001FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SARSIZE0 @ 0XFD070F08

+
+		Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.
+		PSU_DDRC_SARSIZE0_NBLOCKS                                                       0x0
+
+		SAR Size Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F08, 0x000000FFU ,0x00000000U)  
+		RegMask = (DDRC_SARSIZE0_NBLOCKS_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_SARSIZE0_NBLOCKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARSIZE0_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SARBASE1 @ 0XFD070F0C

+
+		Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
+		PSU_DDRC_SARBASE1_BASE_ADDR                                                     0x10
+
+		SAR Base Address Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F0C, 0x000001FFU ,0x00000010U)  
+		RegMask = (DDRC_SARBASE1_BASE_ADDR_MASK |  0 );
+
+		RegVal = ((0x00000010U << DDRC_SARBASE1_BASE_ADDR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARBASE1_OFFSET ,0x000001FFU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : SARSIZE1 @ 0XFD070F10

+
+		Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.
+		PSU_DDRC_SARSIZE1_NBLOCKS                                                       0xf
+
+		SAR Size Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F10, 0x000000FFU ,0x0000000FU)  
+		RegMask = (DDRC_SARSIZE1_NBLOCKS_MASK |  0 );
+
+		RegVal = ((0x0000000FU << DDRC_SARSIZE1_NBLOCKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARSIZE1_OFFSET ,0x000000FFU ,0x0000000FU);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG0_SHADOW @ 0XFD072190

+
+		Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY                                        0x7
+
+		Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR                                      0x1
+
+		Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks
+		PSU_DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN                                         0x2
+
+		Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR                                      0x1
+
+		Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks
+		PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA                                         0x0
+
+		Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT                                          0x2
+
+		DFI Timing Shadow Register 0
+		(OFFSET, MASK, VALUE)      (0XFD072190, 0x1FBFBF3FU ,0x07828002U)  
+		RegMask = (DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_MASK | DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_MASK | DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_MASK | DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_MASK | DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_MASK | DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_SHIFT
+			| 0x00000002U << DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_SHIFT
+			| 0x00000000U << DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_SHIFT
+			| 0x00000002U << DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG0_SHADOW_OFFSET ,0x1FBFBF3FU ,0x07828002U);
+	/*############################################################################################################################ */
+
+		// : DDR CONTROLLER RESET
+		/*Register : RST_DDR_SS @ 0XFD1A0108

+
+		DDR block level reset inside of the DDR Sub System
+		PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X0
+
+		DDR sub system block level reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_DDR_SS_DDR_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_DDR_SS_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : DDR PHY
+		/*Register : PGCR0 @ 0XFD080010

+
+		Address Copy
+		PSU_DDR_PHY_PGCR0_ADCP                                                          0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_30_27                                                0x0
+
+		PHY FIFO Reset
+		PSU_DDR_PHY_PGCR0_PHYFRST                                                       0x1
+
+		Oscillator Mode Address/Command Delay Line Select
+		PSU_DDR_PHY_PGCR0_OSCACDL                                                       0x3
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_23_19                                                0x0
+
+		Digital Test Output Select
+		PSU_DDR_PHY_PGCR0_DTOSEL                                                        0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_13                                                   0x0
+
+		Oscillator Mode Division
+		PSU_DDR_PHY_PGCR0_OSCDIV                                                        0xf
+
+		Oscillator Enable
+		PSU_DDR_PHY_PGCR0_OSCEN                                                         0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_7_0                                                  0x0
+
+		PHY General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080010, 0xFFFFFFFFU ,0x07001E00U)  
+		RegMask = (DDR_PHY_PGCR0_ADCP_MASK | DDR_PHY_PGCR0_RESERVED_30_27_MASK | DDR_PHY_PGCR0_PHYFRST_MASK | DDR_PHY_PGCR0_OSCACDL_MASK | DDR_PHY_PGCR0_RESERVED_23_19_MASK | DDR_PHY_PGCR0_DTOSEL_MASK | DDR_PHY_PGCR0_RESERVED_13_MASK | DDR_PHY_PGCR0_OSCDIV_MASK | DDR_PHY_PGCR0_OSCEN_MASK | DDR_PHY_PGCR0_RESERVED_7_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_PGCR0_ADCP_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_30_27_SHIFT
+			| 0x00000001U << DDR_PHY_PGCR0_PHYFRST_SHIFT
+			| 0x00000003U << DDR_PHY_PGCR0_OSCACDL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_23_19_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_DTOSEL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_13_SHIFT
+			| 0x0000000FU << DDR_PHY_PGCR0_OSCDIV_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_OSCEN_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_7_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PGCR0_OFFSET ,0xFFFFFFFFU ,0x07001E00U);
+	/*############################################################################################################################ */
+
+		/*Register : PGCR2 @ 0XFD080018

+
+		Clear Training Status Registers
+		PSU_DDR_PHY_PGCR2_CLRTSTAT                                                      0x0
+
+		Clear Impedance Calibration
+		PSU_DDR_PHY_PGCR2_CLRZCAL                                                       0x0
+
+		Clear Parity Error
+		PSU_DDR_PHY_PGCR2_CLRPERR                                                       0x0
+
+		Initialization Complete Pin Configuration
+		PSU_DDR_PHY_PGCR2_ICPC                                                          0x0
+
+		Data Training PUB Mode Exit Timer
+		PSU_DDR_PHY_PGCR2_DTPMXTMR                                                      0xf
+
+		Initialization Bypass
+		PSU_DDR_PHY_PGCR2_INITFSMBYP                                                    0x0
+
+		PLL FSM Bypass
+		PSU_DDR_PHY_PGCR2_PLLFSMBYP                                                     0x0
+
+		Refresh Period
+		PSU_DDR_PHY_PGCR2_TREFPRD                                                       0x12302
+
+		PHY General Configuration Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080018, 0xFFFFFFFFU ,0x00F12302U)  
+		RegMask = (DDR_PHY_PGCR2_CLRTSTAT_MASK | DDR_PHY_PGCR2_CLRZCAL_MASK | DDR_PHY_PGCR2_CLRPERR_MASK | DDR_PHY_PGCR2_ICPC_MASK | DDR_PHY_PGCR2_DTPMXTMR_MASK | DDR_PHY_PGCR2_INITFSMBYP_MASK | DDR_PHY_PGCR2_PLLFSMBYP_MASK | DDR_PHY_PGCR2_TREFPRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_PGCR2_CLRTSTAT_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_CLRZCAL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_CLRPERR_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_ICPC_SHIFT
+			| 0x0000000FU << DDR_PHY_PGCR2_DTPMXTMR_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_INITFSMBYP_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_PLLFSMBYP_SHIFT
+			| 0x00012302U << DDR_PHY_PGCR2_TREFPRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PGCR2_OFFSET ,0xFFFFFFFFU ,0x00F12302U);
+	/*############################################################################################################################ */
+
+		/*Register : PGCR5 @ 0XFD080024

+
+		Frequency B Ratio Term
+		PSU_DDR_PHY_PGCR5_FRQBT                                                         0x1
+
+		Frequency A Ratio Term
+		PSU_DDR_PHY_PGCR5_FRQAT                                                         0x1
+
+		DFI Disconnect Time Period
+		PSU_DDR_PHY_PGCR5_DISCNPERIOD                                                   0x0
+
+		Receiver bias core side control
+		PSU_DDR_PHY_PGCR5_VREF_RBCTRL                                                   0xf
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PGCR5_RESERVED_3                                                    0x0
+
+		Internal VREF generator REFSEL ragne select
+		PSU_DDR_PHY_PGCR5_DXREFISELRANGE                                                0x1
+
+		DDL Page Read Write select
+		PSU_DDR_PHY_PGCR5_DDLPGACT                                                      0x0
+
+		DDL Page Read Write select
+		PSU_DDR_PHY_PGCR5_DDLPGRW                                                       0x0
+
+		PHY General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080024, 0xFFFFFFFFU ,0x010100F4U)  
+		RegMask = (DDR_PHY_PGCR5_FRQBT_MASK | DDR_PHY_PGCR5_FRQAT_MASK | DDR_PHY_PGCR5_DISCNPERIOD_MASK | DDR_PHY_PGCR5_VREF_RBCTRL_MASK | DDR_PHY_PGCR5_RESERVED_3_MASK | DDR_PHY_PGCR5_DXREFISELRANGE_MASK | DDR_PHY_PGCR5_DDLPGACT_MASK | DDR_PHY_PGCR5_DDLPGRW_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDR_PHY_PGCR5_FRQBT_SHIFT
+			| 0x00000001U << DDR_PHY_PGCR5_FRQAT_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_DISCNPERIOD_SHIFT
+			| 0x0000000FU << DDR_PHY_PGCR5_VREF_RBCTRL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_RESERVED_3_SHIFT
+			| 0x00000001U << DDR_PHY_PGCR5_DXREFISELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_DDLPGACT_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_DDLPGRW_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PGCR5_OFFSET ,0xFFFFFFFFU ,0x010100F4U);
+	/*############################################################################################################################ */
+
+		/*Register : PTR0 @ 0XFD080040

+
+		PLL Power-Down Time
+		PSU_DDR_PHY_PTR0_TPLLPD                                                         0x2f0
+
+		PLL Gear Shift Time
+		PSU_DDR_PHY_PTR0_TPLLGS                                                         0x60
+
+		PHY Reset Time
+		PSU_DDR_PHY_PTR0_TPHYRST                                                        0x10
+
+		PHY Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080040, 0xFFFFFFFFU ,0x5E001810U)  
+		RegMask = (DDR_PHY_PTR0_TPLLPD_MASK | DDR_PHY_PTR0_TPLLGS_MASK | DDR_PHY_PTR0_TPHYRST_MASK |  0 );
+
+		RegVal = ((0x000002F0U << DDR_PHY_PTR0_TPLLPD_SHIFT
+			| 0x00000060U << DDR_PHY_PTR0_TPLLGS_SHIFT
+			| 0x00000010U << DDR_PHY_PTR0_TPHYRST_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PTR0_OFFSET ,0xFFFFFFFFU ,0x5E001810U);
+	/*############################################################################################################################ */
+
+		/*Register : PTR1 @ 0XFD080044

+
+		PLL Lock Time
+		PSU_DDR_PHY_PTR1_TPLLLOCK                                                       0x80
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PTR1_RESERVED_15_13                                                 0x0
+
+		PLL Reset Time
+		PSU_DDR_PHY_PTR1_TPLLRST                                                        0x5f0
+
+		PHY Timing Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080044, 0xFFFFFFFFU ,0x008005F0U)  
+		RegMask = (DDR_PHY_PTR1_TPLLLOCK_MASK | DDR_PHY_PTR1_RESERVED_15_13_MASK | DDR_PHY_PTR1_TPLLRST_MASK |  0 );
+
+		RegVal = ((0x00000080U << DDR_PHY_PTR1_TPLLLOCK_SHIFT
+			| 0x00000000U << DDR_PHY_PTR1_RESERVED_15_13_SHIFT
+			| 0x000005F0U << DDR_PHY_PTR1_TPLLRST_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PTR1_OFFSET ,0xFFFFFFFFU ,0x008005F0U);
+	/*############################################################################################################################ */
+
+		/*Register : DSGCR @ 0XFD080090

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DSGCR_RESERVED_31_28                                                0x0
+
+		When RDBI enabled, this bit is used to select RDBI CL calculation, if it is 1b1, calculation will use RDBICL, otherwise use d
+		fault calculation.
+		PSU_DDR_PHY_DSGCR_RDBICLSEL                                                     0x0
+
+		When RDBI enabled, if RDBICLSEL is asserted, RDBI CL adjust using this value.
+		PSU_DDR_PHY_DSGCR_RDBICL                                                        0x2
+
+		PHY Impedance Update Enable
+		PSU_DDR_PHY_DSGCR_PHYZUEN                                                       0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DSGCR_RESERVED_22                                                   0x0
+
+		SDRAM Reset Output Enable
+		PSU_DDR_PHY_DSGCR_RSTOE                                                         0x1
+
+		Single Data Rate Mode
+		PSU_DDR_PHY_DSGCR_SDRMODE                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DSGCR_RESERVED_18                                                   0x0
+
+		ATO Analog Test Enable
+		PSU_DDR_PHY_DSGCR_ATOAE                                                         0x0
+
+		DTO Output Enable
+		PSU_DDR_PHY_DSGCR_DTOOE                                                         0x0
+
+		DTO I/O Mode
+		PSU_DDR_PHY_DSGCR_DTOIOM                                                        0x0
+
+		DTO Power Down Receiver
+		PSU_DDR_PHY_DSGCR_DTOPDR                                                        0x1
+
+		Reserved. Return zeroes on reads
+		PSU_DDR_PHY_DSGCR_RESERVED_13                                                   0x0
+
+		DTO On-Die Termination
+		PSU_DDR_PHY_DSGCR_DTOODT                                                        0x0
+
+		PHY Update Acknowledge Delay
+		PSU_DDR_PHY_DSGCR_PUAD                                                          0x4
+
+		Controller Update Acknowledge Enable
+		PSU_DDR_PHY_DSGCR_CUAEN                                                         0x1
+
+		Reserved. Return zeroes on reads
+		PSU_DDR_PHY_DSGCR_RESERVED_4_3                                                  0x0
+
+		Controller Impedance Update Enable
+		PSU_DDR_PHY_DSGCR_CTLZUEN                                                       0x0
+
+		Reserved. Return zeroes on reads
+		PSU_DDR_PHY_DSGCR_RESERVED_1                                                    0x0
+
+		PHY Update Request Enable
+		PSU_DDR_PHY_DSGCR_PUREN                                                         0x1
+
+		DDR System General Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD080090, 0xFFFFFFFFU ,0x02A04121U)  
+		RegMask = (DDR_PHY_DSGCR_RESERVED_31_28_MASK | DDR_PHY_DSGCR_RDBICLSEL_MASK | DDR_PHY_DSGCR_RDBICL_MASK | DDR_PHY_DSGCR_PHYZUEN_MASK | DDR_PHY_DSGCR_RESERVED_22_MASK | DDR_PHY_DSGCR_RSTOE_MASK | DDR_PHY_DSGCR_SDRMODE_MASK | DDR_PHY_DSGCR_RESERVED_18_MASK | DDR_PHY_DSGCR_ATOAE_MASK | DDR_PHY_DSGCR_DTOOE_MASK | DDR_PHY_DSGCR_DTOIOM_MASK | DDR_PHY_DSGCR_DTOPDR_MASK | DDR_PHY_DSGCR_RESERVED_13_MASK | DDR_PHY_DSGCR_DTOODT_MASK | DDR_PHY_DSGCR_PUAD_MASK | DDR_PHY_DSGCR_CUAEN_MASK | DDR_PHY_DSGCR_RESERVED_4_3_MASK | DDR_PHY_DSGCR_CTLZUEN_MASK | DDR_PHY_DSGCR_RESERVED_1_MASK | DDR_PHY_DSGCR_PUREN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DSGCR_RESERVED_31_28_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RDBICLSEL_SHIFT
+			| 0x00000002U << DDR_PHY_DSGCR_RDBICL_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_PHYZUEN_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_22_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_RSTOE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_SDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_18_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_ATOAE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_DTOOE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_DTOIOM_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_DTOPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_13_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_DTOODT_SHIFT
+			| 0x00000004U << DDR_PHY_DSGCR_PUAD_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_CUAEN_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_4_3_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_CTLZUEN_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_1_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_PUREN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DSGCR_OFFSET ,0xFFFFFFFFU ,0x02A04121U);
+	/*############################################################################################################################ */
+
+		/*Register : DCR @ 0XFD080100

+
+		DDR4 Gear Down Timing.
+		PSU_DDR_PHY_DCR_GEARDN                                                          0x0
+
+		Un-used Bank Group
+		PSU_DDR_PHY_DCR_UBG                                                             0x0
+
+		Un-buffered DIMM Address Mirroring
+		PSU_DDR_PHY_DCR_UDIMM                                                           0x0
+
+		DDR 2T Timing
+		PSU_DDR_PHY_DCR_DDR2T                                                           0x0
+
+		No Simultaneous Rank Access
+		PSU_DDR_PHY_DCR_NOSRA                                                           0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DCR_RESERVED_26_18                                                  0x0
+
+		Byte Mask
+		PSU_DDR_PHY_DCR_BYTEMASK                                                        0x1
+
+		DDR Type
+		PSU_DDR_PHY_DCR_DDRTYPE                                                         0x0
+
+		Multi-Purpose Register (MPR) DQ (DDR3 Only)
+		PSU_DDR_PHY_DCR_MPRDQ                                                           0x0
+
+		Primary DQ (DDR3 Only)
+		PSU_DDR_PHY_DCR_PDQ                                                             0x0
+
+		DDR 8-Bank
+		PSU_DDR_PHY_DCR_DDR8BNK                                                         0x1
+
+		DDR Mode
+		PSU_DDR_PHY_DCR_DDRMD                                                           0x4
+
+		DRAM Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD080100, 0xFFFFFFFFU ,0x0800040CU)  
+		RegMask = (DDR_PHY_DCR_GEARDN_MASK | DDR_PHY_DCR_UBG_MASK | DDR_PHY_DCR_UDIMM_MASK | DDR_PHY_DCR_DDR2T_MASK | DDR_PHY_DCR_NOSRA_MASK | DDR_PHY_DCR_RESERVED_26_18_MASK | DDR_PHY_DCR_BYTEMASK_MASK | DDR_PHY_DCR_DDRTYPE_MASK | DDR_PHY_DCR_MPRDQ_MASK | DDR_PHY_DCR_PDQ_MASK | DDR_PHY_DCR_DDR8BNK_MASK | DDR_PHY_DCR_DDRMD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DCR_GEARDN_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_UBG_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_UDIMM_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_DDR2T_SHIFT
+			| 0x00000001U << DDR_PHY_DCR_NOSRA_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_RESERVED_26_18_SHIFT
+			| 0x00000001U << DDR_PHY_DCR_BYTEMASK_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_DDRTYPE_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_MPRDQ_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_PDQ_SHIFT
+			| 0x00000001U << DDR_PHY_DCR_DDR8BNK_SHIFT
+			| 0x00000004U << DDR_PHY_DCR_DDRMD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DCR_OFFSET ,0xFFFFFFFFU ,0x0800040CU);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR0 @ 0XFD080110

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_31_29                                                0x0
+
+		Activate to activate command delay (different banks)
+		PSU_DDR_PHY_DTPR0_TRRD                                                          0x6
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_23                                                   0x0
+
+		Activate to precharge command delay
+		PSU_DDR_PHY_DTPR0_TRAS                                                          0x24
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_15                                                   0x0
+
+		Precharge command period
+		PSU_DDR_PHY_DTPR0_TRP                                                           0x12
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_7_5                                                  0x0
+
+		Internal read to precharge command delay
+		PSU_DDR_PHY_DTPR0_TRTP                                                          0x8
+
+		DRAM Timing Parameters Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080110, 0xFFFFFFFFU ,0x06241208U)  
+		RegMask = (DDR_PHY_DTPR0_RESERVED_31_29_MASK | DDR_PHY_DTPR0_TRRD_MASK | DDR_PHY_DTPR0_RESERVED_23_MASK | DDR_PHY_DTPR0_TRAS_MASK | DDR_PHY_DTPR0_RESERVED_15_MASK | DDR_PHY_DTPR0_TRP_MASK | DDR_PHY_DTPR0_RESERVED_7_5_MASK | DDR_PHY_DTPR0_TRTP_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR0_RESERVED_31_29_SHIFT
+			| 0x00000006U << DDR_PHY_DTPR0_TRRD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_23_SHIFT
+			| 0x00000024U << DDR_PHY_DTPR0_TRAS_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_15_SHIFT
+			| 0x00000012U << DDR_PHY_DTPR0_TRP_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_7_5_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR0_TRTP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR0_OFFSET ,0xFFFFFFFFU ,0x06241208U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR1 @ 0XFD080114

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_31                                                   0x0
+
+		Minimum delay from when write leveling mode is programmed to the first DQS/DQS# rising edge.
+		PSU_DDR_PHY_DTPR1_TWLMRD                                                        0x28
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_23                                                   0x0
+
+		4-bank activate period
+		PSU_DDR_PHY_DTPR1_TFAW                                                          0x18
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_15_11                                                0x0
+
+		Load mode update delay (DDR4 and DDR3 only)
+		PSU_DDR_PHY_DTPR1_TMOD                                                          0x7
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_7_5                                                  0x0
+
+		Load mode cycle time
+		PSU_DDR_PHY_DTPR1_TMRD                                                          0x8
+
+		DRAM Timing Parameters Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080114, 0xFFFFFFFFU ,0x28180708U)  
+		RegMask = (DDR_PHY_DTPR1_RESERVED_31_MASK | DDR_PHY_DTPR1_TWLMRD_MASK | DDR_PHY_DTPR1_RESERVED_23_MASK | DDR_PHY_DTPR1_TFAW_MASK | DDR_PHY_DTPR1_RESERVED_15_11_MASK | DDR_PHY_DTPR1_TMOD_MASK | DDR_PHY_DTPR1_RESERVED_7_5_MASK | DDR_PHY_DTPR1_TMRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR1_RESERVED_31_SHIFT
+			| 0x00000028U << DDR_PHY_DTPR1_TWLMRD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_23_SHIFT
+			| 0x00000018U << DDR_PHY_DTPR1_TFAW_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_15_11_SHIFT
+			| 0x00000007U << DDR_PHY_DTPR1_TMOD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_7_5_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR1_TMRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR1_OFFSET ,0xFFFFFFFFU ,0x28180708U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR2 @ 0XFD080118

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_31_29                                                0x0
+
+		Read to Write command delay. Valid values are
+		PSU_DDR_PHY_DTPR2_TRTW                                                          0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_27_25                                                0x0
+
+		Read to ODT delay (DDR3 only)
+		PSU_DDR_PHY_DTPR2_TRTODT                                                        0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_23_20                                                0x0
+
+		CKE minimum pulse width
+		PSU_DDR_PHY_DTPR2_TCKE                                                          0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_15_10                                                0x0
+
+		Self refresh exit delay
+		PSU_DDR_PHY_DTPR2_TXS                                                           0x200
+
+		DRAM Timing Parameters Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080118, 0xFFFFFFFFU ,0x00080200U)  
+		RegMask = (DDR_PHY_DTPR2_RESERVED_31_29_MASK | DDR_PHY_DTPR2_TRTW_MASK | DDR_PHY_DTPR2_RESERVED_27_25_MASK | DDR_PHY_DTPR2_TRTODT_MASK | DDR_PHY_DTPR2_RESERVED_23_20_MASK | DDR_PHY_DTPR2_TCKE_MASK | DDR_PHY_DTPR2_RESERVED_15_10_MASK | DDR_PHY_DTPR2_TXS_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR2_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_TRTW_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_27_25_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_TRTODT_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_23_20_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR2_TCKE_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_15_10_SHIFT
+			| 0x00000200U << DDR_PHY_DTPR2_TXS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR2_OFFSET ,0xFFFFFFFFU ,0x00080200U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR3 @ 0XFD08011C

+
+		ODT turn-off delay extension
+		PSU_DDR_PHY_DTPR3_TOFDX                                                         0x4
+
+		Read to read and write to write command delay
+		PSU_DDR_PHY_DTPR3_TCCD                                                          0x0
+
+		DLL locking time
+		PSU_DDR_PHY_DTPR3_TDLLK                                                         0x300
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR3_RESERVED_15_12                                                0x0
+
+		Maximum DQS output access time from CK/CK# (LPDDR2/3 only)
+		PSU_DDR_PHY_DTPR3_TDQSCKMAX                                                     0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR3_RESERVED_7_3                                                  0x0
+
+		DQS output access time from CK/CK# (LPDDR2/3 only)
+		PSU_DDR_PHY_DTPR3_TDQSCK                                                        0x4
+
+		DRAM Timing Parameters Register 3
+		(OFFSET, MASK, VALUE)      (0XFD08011C, 0xFFFFFFFFU ,0x83000804U)  
+		RegMask = (DDR_PHY_DTPR3_TOFDX_MASK | DDR_PHY_DTPR3_TCCD_MASK | DDR_PHY_DTPR3_TDLLK_MASK | DDR_PHY_DTPR3_RESERVED_15_12_MASK | DDR_PHY_DTPR3_TDQSCKMAX_MASK | DDR_PHY_DTPR3_RESERVED_7_3_MASK | DDR_PHY_DTPR3_TDQSCK_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDR_PHY_DTPR3_TOFDX_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR3_TCCD_SHIFT
+			| 0x00000300U << DDR_PHY_DTPR3_TDLLK_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR3_RESERVED_15_12_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR3_TDQSCKMAX_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR3_RESERVED_7_3_SHIFT
+			| 0x00000004U << DDR_PHY_DTPR3_TDQSCK_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR3_OFFSET ,0xFFFFFFFFU ,0x83000804U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR4 @ 0XFD080120

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_31_30                                                0x0
+
+		ODT turn-on/turn-off delays (DDR2 only)
+		PSU_DDR_PHY_DTPR4_TAOND_TAOFD                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_27_26                                                0x0
+
+		Refresh-to-Refresh
+		PSU_DDR_PHY_DTPR4_TRFC                                                          0x116
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_15_14                                                0x0
+
+		Write leveling output delay
+		PSU_DDR_PHY_DTPR4_TWLO                                                          0x2b
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_7_5                                                  0x0
+
+		Power down exit delay
+		PSU_DDR_PHY_DTPR4_TXP                                                           0x8
+
+		DRAM Timing Parameters Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080120, 0xFFFFFFFFU ,0x01162B08U)  
+		RegMask = (DDR_PHY_DTPR4_RESERVED_31_30_MASK | DDR_PHY_DTPR4_TAOND_TAOFD_MASK | DDR_PHY_DTPR4_RESERVED_27_26_MASK | DDR_PHY_DTPR4_TRFC_MASK | DDR_PHY_DTPR4_RESERVED_15_14_MASK | DDR_PHY_DTPR4_TWLO_MASK | DDR_PHY_DTPR4_RESERVED_7_5_MASK | DDR_PHY_DTPR4_TXP_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR4_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_TAOND_TAOFD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_27_26_SHIFT
+			| 0x00000116U << DDR_PHY_DTPR4_TRFC_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DTPR4_TWLO_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_7_5_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR4_TXP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR4_OFFSET ,0xFFFFFFFFU ,0x01162B08U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR5 @ 0XFD080124

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR5_RESERVED_31_24                                                0x0
+
+		Activate to activate command delay (same bank)
+		PSU_DDR_PHY_DTPR5_TRC                                                           0x32
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR5_RESERVED_15                                                   0x0
+
+		Activate to read or write delay
+		PSU_DDR_PHY_DTPR5_TRCD                                                          0xf
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR5_RESERVED_7_5                                                  0x0
+
+		Internal write to read command delay
+		PSU_DDR_PHY_DTPR5_TWTR                                                          0x9
+
+		DRAM Timing Parameters Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080124, 0xFFFFFFFFU ,0x00320F09U)  
+		RegMask = (DDR_PHY_DTPR5_RESERVED_31_24_MASK | DDR_PHY_DTPR5_TRC_MASK | DDR_PHY_DTPR5_RESERVED_15_MASK | DDR_PHY_DTPR5_TRCD_MASK | DDR_PHY_DTPR5_RESERVED_7_5_MASK | DDR_PHY_DTPR5_TWTR_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR5_RESERVED_31_24_SHIFT
+			| 0x00000032U << DDR_PHY_DTPR5_TRC_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR5_RESERVED_15_SHIFT
+			| 0x0000000FU << DDR_PHY_DTPR5_TRCD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR5_RESERVED_7_5_SHIFT
+			| 0x00000009U << DDR_PHY_DTPR5_TWTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR5_OFFSET ,0xFFFFFFFFU ,0x00320F09U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR6 @ 0XFD080128

+
+		PUB Write Latency Enable
+		PSU_DDR_PHY_DTPR6_PUBWLEN                                                       0x0
+
+		PUB Read Latency Enable
+		PSU_DDR_PHY_DTPR6_PUBRLEN                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR6_RESERVED_29_14                                                0x0
+
+		Write Latency
+		PSU_DDR_PHY_DTPR6_PUBWL                                                         0xe
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR6_RESERVED_7_6                                                  0x0
+
+		Read Latency
+		PSU_DDR_PHY_DTPR6_PUBRL                                                         0xf
+
+		DRAM Timing Parameters Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080128, 0xFFFFFFFFU ,0x00000E0FU)  
+		RegMask = (DDR_PHY_DTPR6_PUBWLEN_MASK | DDR_PHY_DTPR6_PUBRLEN_MASK | DDR_PHY_DTPR6_RESERVED_29_14_MASK | DDR_PHY_DTPR6_PUBWL_MASK | DDR_PHY_DTPR6_RESERVED_7_6_MASK | DDR_PHY_DTPR6_PUBRL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR6_PUBWLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR6_PUBRLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR6_RESERVED_29_14_SHIFT
+			| 0x0000000EU << DDR_PHY_DTPR6_PUBWL_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR6_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DTPR6_PUBRL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR6_OFFSET ,0xFFFFFFFFU ,0x00000E0FU);
+	/*############################################################################################################################ */
+
+		/*Register : RDIMMGCR0 @ 0XFD080140

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_31                                               0x0
+
+		RDMIMM Quad CS Enable
+		PSU_DDR_PHY_RDIMMGCR0_QCSEN                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_29_28                                            0x0
+
+		RDIMM Outputs I/O Mode
+		PSU_DDR_PHY_RDIMMGCR0_RDIMMIOM                                                  0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_26_24                                            0x0
+
+		ERROUT# Output Enable
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTOE                                                  0x0
+
+		ERROUT# I/O Mode
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTIOM                                                 0x1
+
+		ERROUT# Power Down Receiver
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTPDR                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_20                                               0x0
+
+		ERROUT# On-Die Termination
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTODT                                                 0x0
+
+		Load Reduced DIMM
+		PSU_DDR_PHY_RDIMMGCR0_LRDIMM                                                    0x0
+
+		PAR_IN I/O Mode
+		PSU_DDR_PHY_RDIMMGCR0_PARINIOM                                                  0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_16_8                                             0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD                                             0x0
+
+		Rank Mirror Enable.
+		PSU_DDR_PHY_RDIMMGCR0_RNKMRREN                                                  0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_3                                                0x0
+
+		Stop on Parity Error
+		PSU_DDR_PHY_RDIMMGCR0_SOPERR                                                    0x0
+
+		Parity Error No Registering
+		PSU_DDR_PHY_RDIMMGCR0_ERRNOREG                                                  0x0
+
+		Registered DIMM
+		PSU_DDR_PHY_RDIMMGCR0_RDIMM                                                     0x0
+
+		RDIMM General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080140, 0xFFFFFFFFU ,0x08400020U)  
+		RegMask = (DDR_PHY_RDIMMGCR0_RESERVED_31_MASK | DDR_PHY_RDIMMGCR0_QCSEN_MASK | DDR_PHY_RDIMMGCR0_RESERVED_29_28_MASK | DDR_PHY_RDIMMGCR0_RDIMMIOM_MASK | DDR_PHY_RDIMMGCR0_RESERVED_26_24_MASK | DDR_PHY_RDIMMGCR0_ERROUTOE_MASK | DDR_PHY_RDIMMGCR0_ERROUTIOM_MASK | DDR_PHY_RDIMMGCR0_ERROUTPDR_MASK | DDR_PHY_RDIMMGCR0_RESERVED_20_MASK | DDR_PHY_RDIMMGCR0_ERROUTODT_MASK | DDR_PHY_RDIMMGCR0_LRDIMM_MASK | DDR_PHY_RDIMMGCR0_PARINIOM_MASK | DDR_PHY_RDIMMGCR0_RESERVED_16_8_MASK | DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_MASK | DDR_PHY_RDIMMGCR0_RNKMRREN_MASK | DDR_PHY_RDIMMGCR0_RESERVED_3_MASK | DDR_PHY_RDIMMGCR0_SOPERR_MASK | DDR_PHY_RDIMMGCR0_ERRNOREG_MASK | DDR_PHY_RDIMMGCR0_RDIMM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_31_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_QCSEN_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_29_28_SHIFT
+			| 0x00000001U << DDR_PHY_RDIMMGCR0_RDIMMIOM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_26_24_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTOE_SHIFT
+			| 0x00000001U << DDR_PHY_RDIMMGCR0_ERROUTIOM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTPDR_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_20_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTODT_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_LRDIMM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_PARINIOM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_16_8_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_SHIFT
+			| 0x00000002U << DDR_PHY_RDIMMGCR0_RNKMRREN_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_3_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_SOPERR_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERRNOREG_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RDIMM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RDIMMGCR0_OFFSET ,0xFFFFFFFFU ,0x08400020U);
+	/*############################################################################################################################ */
+
+		/*Register : RDIMMGCR1 @ 0XFD080144

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_31_29                                            0x0
+
+		Address [17] B-side Inversion Disable
+		PSU_DDR_PHY_RDIMMGCR1_A17BID                                                    0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_27                                               0x0
+
+		Command word to command word programming delay
+		PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L2                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_23                                               0x0
+
+		Command word to command word programming delay
+		PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L                                                  0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_19                                               0x0
+
+		Command word to command word programming delay
+		PSU_DDR_PHY_RDIMMGCR1_TBCMRD                                                    0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_15_14                                            0x0
+
+		Stabilization time
+		PSU_DDR_PHY_RDIMMGCR1_TBCSTAB                                                   0xc80
+
+		RDIMM General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080144, 0xFFFFFFFFU ,0x00000C80U)  
+		RegMask = (DDR_PHY_RDIMMGCR1_RESERVED_31_29_MASK | DDR_PHY_RDIMMGCR1_A17BID_MASK | DDR_PHY_RDIMMGCR1_RESERVED_27_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_L2_MASK | DDR_PHY_RDIMMGCR1_RESERVED_23_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_L_MASK | DDR_PHY_RDIMMGCR1_RESERVED_19_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_MASK | DDR_PHY_RDIMMGCR1_RESERVED_15_14_MASK | DDR_PHY_RDIMMGCR1_TBCSTAB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_A17BID_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_27_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_L2_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_23_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_L_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_19_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_15_14_SHIFT
+			| 0x00000C80U << DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RDIMMGCR1_OFFSET ,0xFFFFFFFFU ,0x00000C80U);
+	/*############################################################################################################################ */
+
+		/*Register : RDIMMCR1 @ 0XFD080154

+
+		Control Word 15
+		PSU_DDR_PHY_RDIMMCR1_RC15                                                       0x0
+
+		DDR4 Control Word 14 (Parity Control Word) / DDR3 Reserved
+		PSU_DDR_PHY_RDIMMCR1_RC14                                                       0x0
+
+		DDR4 Control Word 13 (DIMM Configuration Control Word) / DDR3 Reserved
+		PSU_DDR_PHY_RDIMMCR1_RC13                                                       0x0
+
+		DDR4 Control Word 12 (Training Control Word) / DDR3 Reserved
+		PSU_DDR_PHY_RDIMMCR1_RC12                                                       0x0
+
+		DDR4 Control Word 11 (Operating Voltage VDD and VREFCA Source Control Word) / DDR3 Control Word 11 (Operation Voltage VDD Con
+		rol Word)
+		PSU_DDR_PHY_RDIMMCR1_RC11                                                       0x0
+
+		DDR4/DDR3 Control Word 10 (RDIMM Operating Speed Control Word)
+		PSU_DDR_PHY_RDIMMCR1_RC10                                                       0x2
+
+		DDR4/DDR3 Control Word 9 (Power Saving Settings Control Word)
+		PSU_DDR_PHY_RDIMMCR1_RC9                                                        0x0
+
+		DDR4 Control Word 8 (Input/Output Configuration Control Word) / DDR3 Control Word 8 (Additional Input Bus Termination Setting
+		Control Word)
+		PSU_DDR_PHY_RDIMMCR1_RC8                                                        0x0
+
+		RDIMM Control Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080154, 0xFFFFFFFFU ,0x00000200U)  
+		RegMask = (DDR_PHY_RDIMMCR1_RC15_MASK | DDR_PHY_RDIMMCR1_RC14_MASK | DDR_PHY_RDIMMCR1_RC13_MASK | DDR_PHY_RDIMMCR1_RC12_MASK | DDR_PHY_RDIMMCR1_RC11_MASK | DDR_PHY_RDIMMCR1_RC10_MASK | DDR_PHY_RDIMMCR1_RC9_MASK | DDR_PHY_RDIMMCR1_RC8_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RDIMMCR1_RC15_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC14_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC13_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC12_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC11_SHIFT
+			| 0x00000002U << DDR_PHY_RDIMMCR1_RC10_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC9_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC8_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RDIMMCR1_OFFSET ,0xFFFFFFFFU ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : MR0 @ 0XFD080180

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR0_RESERVED_31_8                                                   0x8
+
+		CA Terminating Rank
+		PSU_DDR_PHY_MR0_CATR                                                            0x0
+
+		Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR0_RSVD_6_5                                                        0x1
+
+		Built-in Self-Test for RZQ
+		PSU_DDR_PHY_MR0_RZQI                                                            0x2
+
+		Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR0_RSVD_2_0                                                        0x0
+
+		LPDDR4 Mode Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080180, 0xFFFFFFFFU ,0x00000830U)  
+		RegMask = (DDR_PHY_MR0_RESERVED_31_8_MASK | DDR_PHY_MR0_CATR_MASK | DDR_PHY_MR0_RSVD_6_5_MASK | DDR_PHY_MR0_RZQI_MASK | DDR_PHY_MR0_RSVD_2_0_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDR_PHY_MR0_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR0_CATR_SHIFT
+			| 0x00000001U << DDR_PHY_MR0_RSVD_6_5_SHIFT
+			| 0x00000002U << DDR_PHY_MR0_RZQI_SHIFT
+			| 0x00000000U << DDR_PHY_MR0_RSVD_2_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR0_OFFSET ,0xFFFFFFFFU ,0x00000830U);
+	/*############################################################################################################################ */
+
+		/*Register : MR1 @ 0XFD080184

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR1_RESERVED_31_8                                                   0x3
+
+		Read Postamble Length
+		PSU_DDR_PHY_MR1_RDPST                                                           0x0
+
+		Write-recovery for auto-precharge command
+		PSU_DDR_PHY_MR1_NWR                                                             0x0
+
+		Read Preamble Length
+		PSU_DDR_PHY_MR1_RDPRE                                                           0x0
+
+		Write Preamble Length
+		PSU_DDR_PHY_MR1_WRPRE                                                           0x0
+
+		Burst Length
+		PSU_DDR_PHY_MR1_BL                                                              0x1
+
+		LPDDR4 Mode Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080184, 0xFFFFFFFFU ,0x00000301U)  
+		RegMask = (DDR_PHY_MR1_RESERVED_31_8_MASK | DDR_PHY_MR1_RDPST_MASK | DDR_PHY_MR1_NWR_MASK | DDR_PHY_MR1_RDPRE_MASK | DDR_PHY_MR1_WRPRE_MASK | DDR_PHY_MR1_BL_MASK |  0 );
+
+		RegVal = ((0x00000003U << DDR_PHY_MR1_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_RDPST_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_NWR_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_RDPRE_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_WRPRE_SHIFT
+			| 0x00000001U << DDR_PHY_MR1_BL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR1_OFFSET ,0xFFFFFFFFU ,0x00000301U);
+	/*############################################################################################################################ */
+
+		/*Register : MR2 @ 0XFD080188

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR2_RESERVED_31_8                                                   0x0
+
+		Write Leveling
+		PSU_DDR_PHY_MR2_WRL                                                             0x0
+
+		Write Latency Set
+		PSU_DDR_PHY_MR2_WLS                                                             0x0
+
+		Write Latency
+		PSU_DDR_PHY_MR2_WL                                                              0x4
+
+		Read Latency
+		PSU_DDR_PHY_MR2_RL                                                              0x0
+
+		LPDDR4 Mode Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080188, 0xFFFFFFFFU ,0x00000020U)  
+		RegMask = (DDR_PHY_MR2_RESERVED_31_8_MASK | DDR_PHY_MR2_WRL_MASK | DDR_PHY_MR2_WLS_MASK | DDR_PHY_MR2_WL_MASK | DDR_PHY_MR2_RL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR2_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR2_WRL_SHIFT
+			| 0x00000000U << DDR_PHY_MR2_WLS_SHIFT
+			| 0x00000004U << DDR_PHY_MR2_WL_SHIFT
+			| 0x00000000U << DDR_PHY_MR2_RL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR2_OFFSET ,0xFFFFFFFFU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : MR3 @ 0XFD08018C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR3_RESERVED_31_8                                                   0x2
+
+		DBI-Write Enable
+		PSU_DDR_PHY_MR3_DBIWR                                                           0x0
+
+		DBI-Read Enable
+		PSU_DDR_PHY_MR3_DBIRD                                                           0x0
+
+		Pull-down Drive Strength
+		PSU_DDR_PHY_MR3_PDDS                                                            0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR3_RSVD                                                            0x0
+
+		Write Postamble Length
+		PSU_DDR_PHY_MR3_WRPST                                                           0x0
+
+		Pull-up Calibration Point
+		PSU_DDR_PHY_MR3_PUCAL                                                           0x0
+
+		LPDDR4 Mode Register 3
+		(OFFSET, MASK, VALUE)      (0XFD08018C, 0xFFFFFFFFU ,0x00000200U)  
+		RegMask = (DDR_PHY_MR3_RESERVED_31_8_MASK | DDR_PHY_MR3_DBIWR_MASK | DDR_PHY_MR3_DBIRD_MASK | DDR_PHY_MR3_PDDS_MASK | DDR_PHY_MR3_RSVD_MASK | DDR_PHY_MR3_WRPST_MASK | DDR_PHY_MR3_PUCAL_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDR_PHY_MR3_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_DBIWR_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_DBIRD_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_PDDS_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_WRPST_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_PUCAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR3_OFFSET ,0xFFFFFFFFU ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : MR4 @ 0XFD080190

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR4_RESERVED_31_16                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR4_RSVD_15_13                                                      0x0
+
+		Write Preamble
+		PSU_DDR_PHY_MR4_WRP                                                             0x0
+
+		Read Preamble
+		PSU_DDR_PHY_MR4_RDP                                                             0x0
+
+		Read Preamble Training Mode
+		PSU_DDR_PHY_MR4_RPTM                                                            0x0
+
+		Self Refresh Abort
+		PSU_DDR_PHY_MR4_SRA                                                             0x0
+
+		CS to Command Latency Mode
+		PSU_DDR_PHY_MR4_CS2CMDL                                                         0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR4_RSVD1                                                           0x0
+
+		Internal VREF Monitor
+		PSU_DDR_PHY_MR4_IVM                                                             0x0
+
+		Temperature Controlled Refresh Mode
+		PSU_DDR_PHY_MR4_TCRM                                                            0x0
+
+		Temperature Controlled Refresh Range
+		PSU_DDR_PHY_MR4_TCRR                                                            0x0
+
+		Maximum Power Down Mode
+		PSU_DDR_PHY_MR4_MPDM                                                            0x0
+
+		This is a JEDEC reserved bit and is recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR4_RSVD_0                                                          0x0
+
+		DDR4 Mode Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080190, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_MR4_RESERVED_31_16_MASK | DDR_PHY_MR4_RSVD_15_13_MASK | DDR_PHY_MR4_WRP_MASK | DDR_PHY_MR4_RDP_MASK | DDR_PHY_MR4_RPTM_MASK | DDR_PHY_MR4_SRA_MASK | DDR_PHY_MR4_CS2CMDL_MASK | DDR_PHY_MR4_RSVD1_MASK | DDR_PHY_MR4_IVM_MASK | DDR_PHY_MR4_TCRM_MASK | DDR_PHY_MR4_TCRR_MASK | DDR_PHY_MR4_MPDM_MASK | DDR_PHY_MR4_RSVD_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR4_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RSVD_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_WRP_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RDP_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RPTM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_SRA_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_CS2CMDL_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RSVD1_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_IVM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_TCRM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_TCRR_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_MPDM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RSVD_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR4_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MR5 @ 0XFD080194

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR5_RESERVED_31_16                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR5_RSVD                                                            0x0
+
+		Read DBI
+		PSU_DDR_PHY_MR5_RDBI                                                            0x0
+
+		Write DBI
+		PSU_DDR_PHY_MR5_WDBI                                                            0x0
+
+		Data Mask
+		PSU_DDR_PHY_MR5_DM                                                              0x1
+
+		CA Parity Persistent Error
+		PSU_DDR_PHY_MR5_CAPPE                                                           0x1
+
+		RTT_PARK
+		PSU_DDR_PHY_MR5_RTTPARK                                                         0x3
+
+		ODT Input Buffer during Power Down mode
+		PSU_DDR_PHY_MR5_ODTIBPD                                                         0x0
+
+		C/A Parity Error Status
+		PSU_DDR_PHY_MR5_CAPES                                                           0x0
+
+		CRC Error Clear
+		PSU_DDR_PHY_MR5_CRCEC                                                           0x0
+
+		C/A Parity Latency Mode
+		PSU_DDR_PHY_MR5_CAPM                                                            0x0
+
+		DDR4 Mode Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080194, 0xFFFFFFFFU ,0x000006C0U)  
+		RegMask = (DDR_PHY_MR5_RESERVED_31_16_MASK | DDR_PHY_MR5_RSVD_MASK | DDR_PHY_MR5_RDBI_MASK | DDR_PHY_MR5_WDBI_MASK | DDR_PHY_MR5_DM_MASK | DDR_PHY_MR5_CAPPE_MASK | DDR_PHY_MR5_RTTPARK_MASK | DDR_PHY_MR5_ODTIBPD_MASK | DDR_PHY_MR5_CAPES_MASK | DDR_PHY_MR5_CRCEC_MASK | DDR_PHY_MR5_CAPM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR5_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_WDBI_SHIFT
+			| 0x00000001U << DDR_PHY_MR5_DM_SHIFT
+			| 0x00000001U << DDR_PHY_MR5_CAPPE_SHIFT
+			| 0x00000003U << DDR_PHY_MR5_RTTPARK_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_ODTIBPD_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_CAPES_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_CRCEC_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_CAPM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR5_OFFSET ,0xFFFFFFFFU ,0x000006C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MR6 @ 0XFD080198

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR6_RESERVED_31_16                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR6_RSVD_15_13                                                      0x0
+
+		CAS_n to CAS_n command delay for same bank group (tCCD_L)
+		PSU_DDR_PHY_MR6_TCCDL                                                           0x2
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR6_RSVD_9_8                                                        0x0
+
+		VrefDQ Training Enable
+		PSU_DDR_PHY_MR6_VDDQTEN                                                         0x0
+
+		VrefDQ Training Range
+		PSU_DDR_PHY_MR6_VDQTRG                                                          0x0
+
+		VrefDQ Training Values
+		PSU_DDR_PHY_MR6_VDQTVAL                                                         0x19
+
+		DDR4 Mode Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080198, 0xFFFFFFFFU ,0x00000819U)  
+		RegMask = (DDR_PHY_MR6_RESERVED_31_16_MASK | DDR_PHY_MR6_RSVD_15_13_MASK | DDR_PHY_MR6_TCCDL_MASK | DDR_PHY_MR6_RSVD_9_8_MASK | DDR_PHY_MR6_VDDQTEN_MASK | DDR_PHY_MR6_VDQTRG_MASK | DDR_PHY_MR6_VDQTVAL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR6_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_RSVD_15_13_SHIFT
+			| 0x00000002U << DDR_PHY_MR6_TCCDL_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_RSVD_9_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_VDDQTEN_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_VDQTRG_SHIFT
+			| 0x00000019U << DDR_PHY_MR6_VDQTVAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR6_OFFSET ,0xFFFFFFFFU ,0x00000819U);
+	/*############################################################################################################################ */
+
+		/*Register : MR11 @ 0XFD0801AC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR11_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR11_RSVD                                                           0x0
+
+		Power Down Control
+		PSU_DDR_PHY_MR11_PDCTL                                                          0x0
+
+		DQ Bus Receiver On-Die-Termination
+		PSU_DDR_PHY_MR11_DQODT                                                          0x0
+
+		LPDDR4 Mode Register 11
+		(OFFSET, MASK, VALUE)      (0XFD0801AC, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_MR11_RESERVED_31_8_MASK | DDR_PHY_MR11_RSVD_MASK | DDR_PHY_MR11_PDCTL_MASK | DDR_PHY_MR11_DQODT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR11_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR11_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR11_PDCTL_SHIFT
+			| 0x00000000U << DDR_PHY_MR11_DQODT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR11_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MR12 @ 0XFD0801B0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR12_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR12_RSVD                                                           0x0
+
+		VREF_CA Range Select.
+		PSU_DDR_PHY_MR12_VR_CA                                                          0x1
+
+		Controls the VREF(ca) levels for Frequency-Set-Point[1:0].
+		PSU_DDR_PHY_MR12_VREF_CA                                                        0xd
+
+		LPDDR4 Mode Register 12
+		(OFFSET, MASK, VALUE)      (0XFD0801B0, 0xFFFFFFFFU ,0x0000004DU)  
+		RegMask = (DDR_PHY_MR12_RESERVED_31_8_MASK | DDR_PHY_MR12_RSVD_MASK | DDR_PHY_MR12_VR_CA_MASK | DDR_PHY_MR12_VREF_CA_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR12_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR12_RSVD_SHIFT
+			| 0x00000001U << DDR_PHY_MR12_VR_CA_SHIFT
+			| 0x0000000DU << DDR_PHY_MR12_VREF_CA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR12_OFFSET ,0xFFFFFFFFU ,0x0000004DU);
+	/*############################################################################################################################ */
+
+		/*Register : MR13 @ 0XFD0801B4

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR13_RESERVED_31_8                                                  0x0
+
+		Frequency Set Point Operation Mode
+		PSU_DDR_PHY_MR13_FSPOP                                                          0x0
+
+		Frequency Set Point Write Enable
+		PSU_DDR_PHY_MR13_FSPWR                                                          0x0
+
+		Data Mask Enable
+		PSU_DDR_PHY_MR13_DMD                                                            0x0
+
+		Refresh Rate Option
+		PSU_DDR_PHY_MR13_RRO                                                            0x0
+
+		VREF Current Generator
+		PSU_DDR_PHY_MR13_VRCG                                                           0x1
+
+		VREF Output
+		PSU_DDR_PHY_MR13_VRO                                                            0x0
+
+		Read Preamble Training Mode
+		PSU_DDR_PHY_MR13_RPT                                                            0x0
+
+		Command Bus Training
+		PSU_DDR_PHY_MR13_CBT                                                            0x0
+
+		LPDDR4 Mode Register 13
+		(OFFSET, MASK, VALUE)      (0XFD0801B4, 0xFFFFFFFFU ,0x00000008U)  
+		RegMask = (DDR_PHY_MR13_RESERVED_31_8_MASK | DDR_PHY_MR13_FSPOP_MASK | DDR_PHY_MR13_FSPWR_MASK | DDR_PHY_MR13_DMD_MASK | DDR_PHY_MR13_RRO_MASK | DDR_PHY_MR13_VRCG_MASK | DDR_PHY_MR13_VRO_MASK | DDR_PHY_MR13_RPT_MASK | DDR_PHY_MR13_CBT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR13_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_FSPOP_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_FSPWR_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_DMD_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_RRO_SHIFT
+			| 0x00000001U << DDR_PHY_MR13_VRCG_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_VRO_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_RPT_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_CBT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR13_OFFSET ,0xFFFFFFFFU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MR14 @ 0XFD0801B8

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR14_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR14_RSVD                                                           0x0
+
+		VREFDQ Range Selects.
+		PSU_DDR_PHY_MR14_VR_DQ                                                          0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR14_VREF_DQ                                                        0xd
+
+		LPDDR4 Mode Register 14
+		(OFFSET, MASK, VALUE)      (0XFD0801B8, 0xFFFFFFFFU ,0x0000004DU)  
+		RegMask = (DDR_PHY_MR14_RESERVED_31_8_MASK | DDR_PHY_MR14_RSVD_MASK | DDR_PHY_MR14_VR_DQ_MASK | DDR_PHY_MR14_VREF_DQ_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR14_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR14_RSVD_SHIFT
+			| 0x00000001U << DDR_PHY_MR14_VR_DQ_SHIFT
+			| 0x0000000DU << DDR_PHY_MR14_VREF_DQ_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR14_OFFSET ,0xFFFFFFFFU ,0x0000004DU);
+	/*############################################################################################################################ */
+
+		/*Register : MR22 @ 0XFD0801D8

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR22_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR22_RSVD                                                           0x0
+
+		CA ODT termination disable.
+		PSU_DDR_PHY_MR22_ODTD_CA                                                        0x0
+
+		ODT CS override.
+		PSU_DDR_PHY_MR22_ODTE_CS                                                        0x0
+
+		ODT CK override.
+		PSU_DDR_PHY_MR22_ODTE_CK                                                        0x0
+
+		Controller ODT value for VOH calibration.
+		PSU_DDR_PHY_MR22_CODT                                                           0x0
+
+		LPDDR4 Mode Register 22
+		(OFFSET, MASK, VALUE)      (0XFD0801D8, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_MR22_RESERVED_31_8_MASK | DDR_PHY_MR22_RSVD_MASK | DDR_PHY_MR22_ODTD_CA_MASK | DDR_PHY_MR22_ODTE_CS_MASK | DDR_PHY_MR22_ODTE_CK_MASK | DDR_PHY_MR22_CODT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR22_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_ODTD_CA_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_ODTE_CS_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_ODTE_CK_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_CODT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR22_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DTCR0 @ 0XFD080200

+
+		Refresh During Training
+		PSU_DDR_PHY_DTCR0_RFSHDT                                                        0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR0_RESERVED_27_26                                                0x0
+
+		Data Training Debug Rank Select
+		PSU_DDR_PHY_DTCR0_DTDRS                                                         0x1
+
+		Data Training with Early/Extended Gate
+		PSU_DDR_PHY_DTCR0_DTEXG                                                         0x0
+
+		Data Training Extended Write DQS
+		PSU_DDR_PHY_DTCR0_DTEXD                                                         0x0
+
+		Data Training Debug Step
+		PSU_DDR_PHY_DTCR0_DTDSTP                                                        0x0
+
+		Data Training Debug Enable
+		PSU_DDR_PHY_DTCR0_DTDEN                                                         0x0
+
+		Data Training Debug Byte Select
+		PSU_DDR_PHY_DTCR0_DTDBS                                                         0x0
+
+		Data Training read DBI deskewing configuration
+		PSU_DDR_PHY_DTCR0_DTRDBITR                                                      0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR0_RESERVED_13                                                   0x0
+
+		Data Training Write Bit Deskew Data Mask
+		PSU_DDR_PHY_DTCR0_DTWBDDM                                                       0x1
+
+		Refreshes Issued During Entry to Training
+		PSU_DDR_PHY_DTCR0_RFSHEN                                                        0x1
+
+		Data Training Compare Data
+		PSU_DDR_PHY_DTCR0_DTCMPD                                                        0x1
+
+		Data Training Using MPR
+		PSU_DDR_PHY_DTCR0_DTMPR                                                         0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR0_RESERVED_5_4                                                  0x0
+
+		Data Training Repeat Number
+		PSU_DDR_PHY_DTCR0_DTRPTN                                                        0x7
+
+		Data Training Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080200, 0xFFFFFFFFU ,0x810011C7U)  
+		RegMask = (DDR_PHY_DTCR0_RFSHDT_MASK | DDR_PHY_DTCR0_RESERVED_27_26_MASK | DDR_PHY_DTCR0_DTDRS_MASK | DDR_PHY_DTCR0_DTEXG_MASK | DDR_PHY_DTCR0_DTEXD_MASK | DDR_PHY_DTCR0_DTDSTP_MASK | DDR_PHY_DTCR0_DTDEN_MASK | DDR_PHY_DTCR0_DTDBS_MASK | DDR_PHY_DTCR0_DTRDBITR_MASK | DDR_PHY_DTCR0_RESERVED_13_MASK | DDR_PHY_DTCR0_DTWBDDM_MASK | DDR_PHY_DTCR0_RFSHEN_MASK | DDR_PHY_DTCR0_DTCMPD_MASK | DDR_PHY_DTCR0_DTMPR_MASK | DDR_PHY_DTCR0_RESERVED_5_4_MASK | DDR_PHY_DTCR0_DTRPTN_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDR_PHY_DTCR0_RFSHDT_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_27_26_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTDRS_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTEXG_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTEXD_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTDSTP_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTDBS_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTRDBITR_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_13_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTWBDDM_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_RFSHEN_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTCMPD_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTMPR_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_5_4_SHIFT
+			| 0x00000007U << DDR_PHY_DTCR0_DTRPTN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTCR0_OFFSET ,0xFFFFFFFFU ,0x810011C7U);
+	/*############################################################################################################################ */
+
+		/*Register : DTCR1 @ 0XFD080204

+
+		Rank Enable.
+		PSU_DDR_PHY_DTCR1_RANKEN_RSVD                                                   0x0
+
+		Rank Enable.
+		PSU_DDR_PHY_DTCR1_RANKEN                                                        0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_15_14                                                0x0
+
+		Data Training Rank
+		PSU_DDR_PHY_DTCR1_DTRANK                                                        0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_11                                                   0x0
+
+		Read Leveling Gate Sampling Difference
+		PSU_DDR_PHY_DTCR1_RDLVLGDIFF                                                    0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_7                                                    0x0
+
+		Read Leveling Gate Shift
+		PSU_DDR_PHY_DTCR1_RDLVLGS                                                       0x3
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_3                                                    0x0
+
+		Read Preamble Training enable
+		PSU_DDR_PHY_DTCR1_RDPRMVL_TRN                                                   0x1
+
+		Read Leveling Enable
+		PSU_DDR_PHY_DTCR1_RDLVLEN                                                       0x1
+
+		Basic Gate Training Enable
+		PSU_DDR_PHY_DTCR1_BSTEN                                                         0x0
+
+		Data Training Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080204, 0xFFFFFFFFU ,0x00010236U)  
+		RegMask = (DDR_PHY_DTCR1_RANKEN_RSVD_MASK | DDR_PHY_DTCR1_RANKEN_MASK | DDR_PHY_DTCR1_RESERVED_15_14_MASK | DDR_PHY_DTCR1_DTRANK_MASK | DDR_PHY_DTCR1_RESERVED_11_MASK | DDR_PHY_DTCR1_RDLVLGDIFF_MASK | DDR_PHY_DTCR1_RESERVED_7_MASK | DDR_PHY_DTCR1_RDLVLGS_MASK | DDR_PHY_DTCR1_RESERVED_3_MASK | DDR_PHY_DTCR1_RDPRMVL_TRN_MASK | DDR_PHY_DTCR1_RDLVLEN_MASK | DDR_PHY_DTCR1_BSTEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTCR1_RANKEN_RSVD_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR1_RANKEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_DTRANK_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_11_SHIFT
+			| 0x00000002U << DDR_PHY_DTCR1_RDLVLGDIFF_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_7_SHIFT
+			| 0x00000003U << DDR_PHY_DTCR1_RDLVLGS_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_3_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR1_RDPRMVL_TRN_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR1_RDLVLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_BSTEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTCR1_OFFSET ,0xFFFFFFFFU ,0x00010236U);
+	/*############################################################################################################################ */
+
+		/*Register : CATR0 @ 0XFD080240

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_CATR0_RESERVED_31_21                                                0x0
+
+		Minimum time (in terms of number of dram clocks) between two consectuve CA calibration command
+		PSU_DDR_PHY_CATR0_CACD                                                          0x14
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_CATR0_RESERVED_15_13                                                0x0
+
+		Minimum time (in terms of number of dram clocks) PUB should wait before sampling the CA response after Calibration command ha
+		 been sent to the memory
+		PSU_DDR_PHY_CATR0_CAADR                                                         0x10
+
+		CA_1 Response Byte Lane 1
+		PSU_DDR_PHY_CATR0_CA1BYTE1                                                      0x5
+
+		CA_1 Response Byte Lane 0
+		PSU_DDR_PHY_CATR0_CA1BYTE0                                                      0x4
+
+		CA Training Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080240, 0xFFFFFFFFU ,0x00141054U)  
+		RegMask = (DDR_PHY_CATR0_RESERVED_31_21_MASK | DDR_PHY_CATR0_CACD_MASK | DDR_PHY_CATR0_RESERVED_15_13_MASK | DDR_PHY_CATR0_CAADR_MASK | DDR_PHY_CATR0_CA1BYTE1_MASK | DDR_PHY_CATR0_CA1BYTE0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_CATR0_RESERVED_31_21_SHIFT
+			| 0x00000014U << DDR_PHY_CATR0_CACD_SHIFT
+			| 0x00000000U << DDR_PHY_CATR0_RESERVED_15_13_SHIFT
+			| 0x00000010U << DDR_PHY_CATR0_CAADR_SHIFT
+			| 0x00000005U << DDR_PHY_CATR0_CA1BYTE1_SHIFT
+			| 0x00000004U << DDR_PHY_CATR0_CA1BYTE0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_CATR0_OFFSET ,0xFFFFFFFFU ,0x00141054U);
+	/*############################################################################################################################ */
+
+		/*Register : RIOCR5 @ 0XFD0804F4

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RIOCR5_RESERVED_31_16                                               0x0
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_RIOCR5_ODTOEMODE_RSVD                                               0x0
+
+		SDRAM On-die Termination Output Enable (OE) Mode Selection.
+		PSU_DDR_PHY_RIOCR5_ODTOEMODE                                                    0x5
+
+		Rank I/O Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD0804F4, 0xFFFFFFFFU ,0x00000005U)  
+		RegMask = (DDR_PHY_RIOCR5_RESERVED_31_16_MASK | DDR_PHY_RIOCR5_ODTOEMODE_RSVD_MASK | DDR_PHY_RIOCR5_ODTOEMODE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_RIOCR5_ODTOEMODE_RSVD_SHIFT
+			| 0x00000005U << DDR_PHY_RIOCR5_ODTOEMODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RIOCR5_OFFSET ,0xFFFFFFFFU ,0x00000005U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR0 @ 0XFD080500

+
+		Address/Command Slew Rate (D3F I/O Only)
+		PSU_DDR_PHY_ACIOCR0_ACSR                                                        0x0
+
+		SDRAM Reset I/O Mode
+		PSU_DDR_PHY_ACIOCR0_RSTIOM                                                      0x1
+
+		SDRAM Reset Power Down Receiver
+		PSU_DDR_PHY_ACIOCR0_RSTPDR                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR0_RESERVED_27                                                 0x0
+
+		SDRAM Reset On-Die Termination
+		PSU_DDR_PHY_ACIOCR0_RSTODT                                                      0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR0_RESERVED_25_10                                              0x0
+
+		CK Duty Cycle Correction
+		PSU_DDR_PHY_ACIOCR0_CKDCC                                                       0x0
+
+		AC Power Down Receiver Mode
+		PSU_DDR_PHY_ACIOCR0_ACPDRMODE                                                   0x2
+
+		AC On-die Termination Mode
+		PSU_DDR_PHY_ACIOCR0_ACODTMODE                                                   0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR0_RESERVED_1                                                  0x0
+
+		Control delayed or non-delayed clock to CS_N/ODT?CKE AC slices.
+		PSU_DDR_PHY_ACIOCR0_ACRANKCLKSEL                                                0x0
+
+		AC I/O Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080500, 0xFFFFFFFFU ,0x30000028U)  
+		RegMask = (DDR_PHY_ACIOCR0_ACSR_MASK | DDR_PHY_ACIOCR0_RSTIOM_MASK | DDR_PHY_ACIOCR0_RSTPDR_MASK | DDR_PHY_ACIOCR0_RESERVED_27_MASK | DDR_PHY_ACIOCR0_RSTODT_MASK | DDR_PHY_ACIOCR0_RESERVED_25_10_MASK | DDR_PHY_ACIOCR0_CKDCC_MASK | DDR_PHY_ACIOCR0_ACPDRMODE_MASK | DDR_PHY_ACIOCR0_ACODTMODE_MASK | DDR_PHY_ACIOCR0_RESERVED_1_MASK | DDR_PHY_ACIOCR0_ACRANKCLKSEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR0_ACSR_SHIFT
+			| 0x00000001U << DDR_PHY_ACIOCR0_RSTIOM_SHIFT
+			| 0x00000001U << DDR_PHY_ACIOCR0_RSTPDR_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_27_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RSTODT_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_25_10_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_CKDCC_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR0_ACPDRMODE_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR0_ACODTMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_ACRANKCLKSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR0_OFFSET ,0xFFFFFFFFU ,0x30000028U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR2 @ 0XFD080508

+
+		Clock gating for glue logic inside CLKGEN and glue logic inside CONTROL slice
+		PSU_DDR_PHY_ACIOCR2_CLKGENCLKGATE                                               0x0
+
+		Clock gating for Output Enable D slices [0]
+		PSU_DDR_PHY_ACIOCR2_ACOECLKGATE0                                                0x0
+
+		Clock gating for Power Down Receiver D slices [0]
+		PSU_DDR_PHY_ACIOCR2_ACPDRCLKGATE0                                               0x0
+
+		Clock gating for Termination Enable D slices [0]
+		PSU_DDR_PHY_ACIOCR2_ACTECLKGATE0                                                0x0
+
+		Clock gating for CK# D slices [1:0]
+		PSU_DDR_PHY_ACIOCR2_CKNCLKGATE0                                                 0x2
+
+		Clock gating for CK D slices [1:0]
+		PSU_DDR_PHY_ACIOCR2_CKCLKGATE0                                                  0x2
+
+		Clock gating for AC D slices [23:0]
+		PSU_DDR_PHY_ACIOCR2_ACCLKGATE0                                                  0x0
+
+		AC I/O Configuration Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080508, 0xFFFFFFFFU ,0x0A000000U)  
+		RegMask = (DDR_PHY_ACIOCR2_CLKGENCLKGATE_MASK | DDR_PHY_ACIOCR2_ACOECLKGATE0_MASK | DDR_PHY_ACIOCR2_ACPDRCLKGATE0_MASK | DDR_PHY_ACIOCR2_ACTECLKGATE0_MASK | DDR_PHY_ACIOCR2_CKNCLKGATE0_MASK | DDR_PHY_ACIOCR2_CKCLKGATE0_MASK | DDR_PHY_ACIOCR2_ACCLKGATE0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR2_CLKGENCLKGATE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACOECLKGATE0_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACPDRCLKGATE0_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACTECLKGATE0_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR2_CKNCLKGATE0_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR2_CKCLKGATE0_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACCLKGATE0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR2_OFFSET ,0xFFFFFFFFU ,0x0A000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR3 @ 0XFD08050C

+
+		SDRAM Parity Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_PAROEMODE                                                   0x0
+
+		SDRAM Bank Group Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_BGOEMODE                                                    0x0
+
+		SDRAM Bank Address Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_BAOEMODE                                                    0x0
+
+		SDRAM A[17] Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_A17OEMODE                                                   0x0
+
+		SDRAM A[16] / RAS_n Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_A16OEMODE                                                   0x0
+
+		SDRAM ACT_n Output Enable (OE) Mode Selection (DDR4 only)
+		PSU_DDR_PHY_ACIOCR3_ACTOEMODE                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR3_RESERVED_15_8                                               0x0
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ACIOCR3_CKOEMODE_RSVD                                               0x0
+
+		SDRAM CK Output Enable (OE) Mode Selection.
+		PSU_DDR_PHY_ACIOCR3_CKOEMODE                                                    0x9
+
+		AC I/O Configuration Register 3
+		(OFFSET, MASK, VALUE)      (0XFD08050C, 0xFFFFFFFFU ,0x00000009U)  
+		RegMask = (DDR_PHY_ACIOCR3_PAROEMODE_MASK | DDR_PHY_ACIOCR3_BGOEMODE_MASK | DDR_PHY_ACIOCR3_BAOEMODE_MASK | DDR_PHY_ACIOCR3_A17OEMODE_MASK | DDR_PHY_ACIOCR3_A16OEMODE_MASK | DDR_PHY_ACIOCR3_ACTOEMODE_MASK | DDR_PHY_ACIOCR3_RESERVED_15_8_MASK | DDR_PHY_ACIOCR3_CKOEMODE_RSVD_MASK | DDR_PHY_ACIOCR3_CKOEMODE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR3_PAROEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_BGOEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_BAOEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_A17OEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_A16OEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_ACTOEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_RESERVED_15_8_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_CKOEMODE_RSVD_SHIFT
+			| 0x00000009U << DDR_PHY_ACIOCR3_CKOEMODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR3_OFFSET ,0xFFFFFFFFU ,0x00000009U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR4 @ 0XFD080510

+
+		Clock gating for AC LB slices and loopback read valid slices
+		PSU_DDR_PHY_ACIOCR4_LBCLKGATE                                                   0x0
+
+		Clock gating for Output Enable D slices [1]
+		PSU_DDR_PHY_ACIOCR4_ACOECLKGATE1                                                0x0
+
+		Clock gating for Power Down Receiver D slices [1]
+		PSU_DDR_PHY_ACIOCR4_ACPDRCLKGATE1                                               0x0
+
+		Clock gating for Termination Enable D slices [1]
+		PSU_DDR_PHY_ACIOCR4_ACTECLKGATE1                                                0x0
+
+		Clock gating for CK# D slices [3:2]
+		PSU_DDR_PHY_ACIOCR4_CKNCLKGATE1                                                 0x2
+
+		Clock gating for CK D slices [3:2]
+		PSU_DDR_PHY_ACIOCR4_CKCLKGATE1                                                  0x2
+
+		Clock gating for AC D slices [47:24]
+		PSU_DDR_PHY_ACIOCR4_ACCLKGATE1                                                  0x0
+
+		AC I/O Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080510, 0xFFFFFFFFU ,0x0A000000U)  
+		RegMask = (DDR_PHY_ACIOCR4_LBCLKGATE_MASK | DDR_PHY_ACIOCR4_ACOECLKGATE1_MASK | DDR_PHY_ACIOCR4_ACPDRCLKGATE1_MASK | DDR_PHY_ACIOCR4_ACTECLKGATE1_MASK | DDR_PHY_ACIOCR4_CKNCLKGATE1_MASK | DDR_PHY_ACIOCR4_CKCLKGATE1_MASK | DDR_PHY_ACIOCR4_ACCLKGATE1_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR4_LBCLKGATE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACOECLKGATE1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACPDRCLKGATE1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACTECLKGATE1_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR4_CKNCLKGATE1_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR4_CKCLKGATE1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACCLKGATE1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR4_OFFSET ,0xFFFFFFFFU ,0x0A000000U);
+	/*############################################################################################################################ */
+
+		/*Register : IOVCR0 @ 0XFD080520

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_IOVCR0_RESERVED_31_29                                               0x0
+
+		Address/command lane VREF Pad Enable
+		PSU_DDR_PHY_IOVCR0_ACREFPEN                                                     0x0
+
+		Address/command lane Internal VREF Enable
+		PSU_DDR_PHY_IOVCR0_ACREFEEN                                                     0x0
+
+		Address/command lane Single-End VREF Enable
+		PSU_DDR_PHY_IOVCR0_ACREFSEN                                                     0x1
+
+		Address/command lane Internal VREF Enable
+		PSU_DDR_PHY_IOVCR0_ACREFIEN                                                     0x1
+
+		External VREF generato REFSEL range select
+		PSU_DDR_PHY_IOVCR0_ACREFESELRANGE                                               0x0
+
+		Address/command lane External VREF Select
+		PSU_DDR_PHY_IOVCR0_ACREFESEL                                                    0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_IOVCR0_ACREFSSELRANGE                                               0x1
+
+		Address/command lane Single-End VREF Select
+		PSU_DDR_PHY_IOVCR0_ACREFSSEL                                                    0x30
+
+		Internal VREF generator REFSEL ragne select
+		PSU_DDR_PHY_IOVCR0_ACVREFISELRANGE                                              0x1
+
+		REFSEL Control for internal AC IOs
+		PSU_DDR_PHY_IOVCR0_ACVREFISEL                                                   0x30
+
+		IO VREF Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080520, 0xFFFFFFFFU ,0x0300B0B0U)  
+		RegMask = (DDR_PHY_IOVCR0_RESERVED_31_29_MASK | DDR_PHY_IOVCR0_ACREFPEN_MASK | DDR_PHY_IOVCR0_ACREFEEN_MASK | DDR_PHY_IOVCR0_ACREFSEN_MASK | DDR_PHY_IOVCR0_ACREFIEN_MASK | DDR_PHY_IOVCR0_ACREFESELRANGE_MASK | DDR_PHY_IOVCR0_ACREFESEL_MASK | DDR_PHY_IOVCR0_ACREFSSELRANGE_MASK | DDR_PHY_IOVCR0_ACREFSSEL_MASK | DDR_PHY_IOVCR0_ACVREFISELRANGE_MASK | DDR_PHY_IOVCR0_ACVREFISEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_IOVCR0_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFPEN_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACREFSEN_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_IOVCR0_ACREFSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACVREFISELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_IOVCR0_ACVREFISEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_IOVCR0_OFFSET ,0xFFFFFFFFU ,0x0300B0B0U);
+	/*############################################################################################################################ */
+
+		/*Register : VTCR0 @ 0XFD080528

+
+		Number of ctl_clk required to meet (> 150ns) timing requirements during DRAM DQ VREF training
+		PSU_DDR_PHY_VTCR0_TVREF                                                         0x7
+
+		DRM DQ VREF training Enable
+		PSU_DDR_PHY_VTCR0_DVEN                                                          0x1
+
+		Per Device Addressability Enable
+		PSU_DDR_PHY_VTCR0_PDAEN                                                         0x1
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR0_RESERVED_26                                                   0x0
+
+		VREF Word Count
+		PSU_DDR_PHY_VTCR0_VWCR                                                          0x4
+
+		DRAM DQ VREF step size used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVSS                                                          0x0
+
+		Maximum VREF limit value used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVMAX                                                         0x32
+
+		Minimum VREF limit value used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVMIN                                                         0x0
+
+		Initial DRAM DQ VREF value used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVINIT                                                        0x19
+
+		VREF Training Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080528, 0xFFFFFFFFU ,0xF9032019U)  
+		RegMask = (DDR_PHY_VTCR0_TVREF_MASK | DDR_PHY_VTCR0_DVEN_MASK | DDR_PHY_VTCR0_PDAEN_MASK | DDR_PHY_VTCR0_RESERVED_26_MASK | DDR_PHY_VTCR0_VWCR_MASK | DDR_PHY_VTCR0_DVSS_MASK | DDR_PHY_VTCR0_DVMAX_MASK | DDR_PHY_VTCR0_DVMIN_MASK | DDR_PHY_VTCR0_DVINIT_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDR_PHY_VTCR0_TVREF_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR0_DVEN_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR0_PDAEN_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR0_RESERVED_26_SHIFT
+			| 0x00000004U << DDR_PHY_VTCR0_VWCR_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR0_DVSS_SHIFT
+			| 0x00000032U << DDR_PHY_VTCR0_DVMAX_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR0_DVMIN_SHIFT
+			| 0x00000019U << DDR_PHY_VTCR0_DVINIT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_VTCR0_OFFSET ,0xFFFFFFFFU ,0xF9032019U);
+	/*############################################################################################################################ */
+
+		/*Register : VTCR1 @ 0XFD08052C

+
+		Host VREF step size used during VREF training. The register value of N indicates step size of (N+1)
+		PSU_DDR_PHY_VTCR1_HVSS                                                          0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR1_RESERVED_27                                                   0x0
+
+		Maximum VREF limit value used during DRAM VREF training.
+		PSU_DDR_PHY_VTCR1_HVMAX                                                         0x7f
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR1_RESERVED_19                                                   0x0
+
+		Minimum VREF limit value used during DRAM VREF training.
+		PSU_DDR_PHY_VTCR1_HVMIN                                                         0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR1_RESERVED_11                                                   0x0
+
+		Static Host Vref Rank Value
+		PSU_DDR_PHY_VTCR1_SHRNK                                                         0x0
+
+		Static Host Vref Rank Enable
+		PSU_DDR_PHY_VTCR1_SHREN                                                         0x1
+
+		Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training
+		PSU_DDR_PHY_VTCR1_TVREFIO                                                       0x4
+
+		Eye LCDL Offset value for VREF training
+		PSU_DDR_PHY_VTCR1_EOFF                                                          0x1
+
+		Number of LCDL Eye points for which VREF training is repeated
+		PSU_DDR_PHY_VTCR1_ENUM                                                          0x1
+
+		HOST (IO) internal VREF training Enable
+		PSU_DDR_PHY_VTCR1_HVEN                                                          0x1
+
+		Host IO Type Control
+		PSU_DDR_PHY_VTCR1_HVIO                                                          0x1
+
+		VREF Training Control Register 1
+		(OFFSET, MASK, VALUE)      (0XFD08052C, 0xFFFFFFFFU ,0x07F0018FU)  
+		RegMask = (DDR_PHY_VTCR1_HVSS_MASK | DDR_PHY_VTCR1_RESERVED_27_MASK | DDR_PHY_VTCR1_HVMAX_MASK | DDR_PHY_VTCR1_RESERVED_19_MASK | DDR_PHY_VTCR1_HVMIN_MASK | DDR_PHY_VTCR1_RESERVED_11_MASK | DDR_PHY_VTCR1_SHRNK_MASK | DDR_PHY_VTCR1_SHREN_MASK | DDR_PHY_VTCR1_TVREFIO_MASK | DDR_PHY_VTCR1_EOFF_MASK | DDR_PHY_VTCR1_ENUM_MASK | DDR_PHY_VTCR1_HVEN_MASK | DDR_PHY_VTCR1_HVIO_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_VTCR1_HVSS_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_27_SHIFT
+			| 0x0000007FU << DDR_PHY_VTCR1_HVMAX_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_19_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_HVMIN_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_11_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_SHRNK_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_SHREN_SHIFT
+			| 0x00000004U << DDR_PHY_VTCR1_TVREFIO_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_EOFF_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_ENUM_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_HVEN_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_HVIO_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_VTCR1_OFFSET ,0xFFFFFFFFU ,0x07F0018FU);
+	/*############################################################################################################################ */
+
+		/*Register : ACBDLR6 @ 0XFD080558

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_31_30                                              0x0
+
+		Delay select for the BDL on Address A[3].
+		PSU_DDR_PHY_ACBDLR6_A03BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_23_22                                              0x0
+
+		Delay select for the BDL on Address A[2].
+		PSU_DDR_PHY_ACBDLR6_A02BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_15_14                                              0x0
+
+		Delay select for the BDL on Address A[1].
+		PSU_DDR_PHY_ACBDLR6_A01BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_7_6                                                0x0
+
+		Delay select for the BDL on Address A[0].
+		PSU_DDR_PHY_ACBDLR6_A00BD                                                       0x0
+
+		AC Bit Delay Line Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080558, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_ACBDLR6_RESERVED_31_30_MASK | DDR_PHY_ACBDLR6_A03BD_MASK | DDR_PHY_ACBDLR6_RESERVED_23_22_MASK | DDR_PHY_ACBDLR6_A02BD_MASK | DDR_PHY_ACBDLR6_RESERVED_15_14_MASK | DDR_PHY_ACBDLR6_A01BD_MASK | DDR_PHY_ACBDLR6_RESERVED_7_6_MASK | DDR_PHY_ACBDLR6_A00BD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A03BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A02BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A01BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A00BD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACBDLR6_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ACBDLR7 @ 0XFD08055C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_31_30                                              0x0
+
+		Delay select for the BDL on Address A[7].
+		PSU_DDR_PHY_ACBDLR7_A07BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_23_22                                              0x0
+
+		Delay select for the BDL on Address A[6].
+		PSU_DDR_PHY_ACBDLR7_A06BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_15_14                                              0x0
+
+		Delay select for the BDL on Address A[5].
+		PSU_DDR_PHY_ACBDLR7_A05BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_7_6                                                0x0
+
+		Delay select for the BDL on Address A[4].
+		PSU_DDR_PHY_ACBDLR7_A04BD                                                       0x0
+
+		AC Bit Delay Line Register 7
+		(OFFSET, MASK, VALUE)      (0XFD08055C, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_ACBDLR7_RESERVED_31_30_MASK | DDR_PHY_ACBDLR7_A07BD_MASK | DDR_PHY_ACBDLR7_RESERVED_23_22_MASK | DDR_PHY_ACBDLR7_A06BD_MASK | DDR_PHY_ACBDLR7_RESERVED_15_14_MASK | DDR_PHY_ACBDLR7_A05BD_MASK | DDR_PHY_ACBDLR7_RESERVED_7_6_MASK | DDR_PHY_ACBDLR7_A04BD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACBDLR7_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A07BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_23_22_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A06BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A05BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_7_6_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A04BD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACBDLR7_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ACBDLR8 @ 0XFD080560

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_31_30                                              0x0
+
+		Delay select for the BDL on Address A[11].
+		PSU_DDR_PHY_ACBDLR8_A11BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_23_22                                              0x0
+
+		Delay select for the BDL on Address A[10].
+		PSU_DDR_PHY_ACBDLR8_A10BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_15_14                                              0x0
+
+		Delay select for the BDL on Address A[9].
+		PSU_DDR_PHY_ACBDLR8_A09BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_7_6                                                0x0
+
+		Delay select for the BDL on Address A[8].
+		PSU_DDR_PHY_ACBDLR8_A08BD                                                       0x0
+
+		AC Bit Delay Line Register 8
+		(OFFSET, MASK, VALUE)      (0XFD080560, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_ACBDLR8_RESERVED_31_30_MASK | DDR_PHY_ACBDLR8_A11BD_MASK | DDR_PHY_ACBDLR8_RESERVED_23_22_MASK | DDR_PHY_ACBDLR8_A10BD_MASK | DDR_PHY_ACBDLR8_RESERVED_15_14_MASK | DDR_PHY_ACBDLR8_A09BD_MASK | DDR_PHY_ACBDLR8_RESERVED_7_6_MASK | DDR_PHY_ACBDLR8_A08BD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACBDLR8_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A11BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_23_22_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A10BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A09BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_7_6_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A08BD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACBDLR8_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQCR @ 0XFD080680

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ZQCR_RESERVED_31_26                                                 0x0
+
+		ZQ VREF Range
+		PSU_DDR_PHY_ZQCR_ZQREFISELRANGE                                                 0x0
+
+		Programmable Wait for Frequency B
+		PSU_DDR_PHY_ZQCR_PGWAIT_FRQB                                                    0x11
+
+		Programmable Wait for Frequency A
+		PSU_DDR_PHY_ZQCR_PGWAIT_FRQA                                                    0x11
+
+		ZQ VREF Pad Enable
+		PSU_DDR_PHY_ZQCR_ZQREFPEN                                                       0x0
+
+		ZQ Internal VREF Enable
+		PSU_DDR_PHY_ZQCR_ZQREFIEN                                                       0x1
+
+		Choice of termination mode
+		PSU_DDR_PHY_ZQCR_ODT_MODE                                                       0x1
+
+		Force ZCAL VT update
+		PSU_DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE                                           0x0
+
+		IO VT Drift Limit
+		PSU_DDR_PHY_ZQCR_IODLMT                                                         0x2
+
+		Averaging algorithm enable, if set, enables averaging algorithm
+		PSU_DDR_PHY_ZQCR_AVGEN                                                          0x1
+
+		Maximum number of averaging rounds to be used by averaging algorithm
+		PSU_DDR_PHY_ZQCR_AVGMAX                                                         0x2
+
+		ZQ Calibration Type
+		PSU_DDR_PHY_ZQCR_ZCALT                                                          0x0
+
+		ZQ Power Down
+		PSU_DDR_PHY_ZQCR_ZQPD                                                           0x0
+
+		ZQ Impedance Control Register
+		(OFFSET, MASK, VALUE)      (0XFD080680, 0xFFFFFFFFU ,0x008A2A58U)  
+		RegMask = (DDR_PHY_ZQCR_RESERVED_31_26_MASK | DDR_PHY_ZQCR_ZQREFISELRANGE_MASK | DDR_PHY_ZQCR_PGWAIT_FRQB_MASK | DDR_PHY_ZQCR_PGWAIT_FRQA_MASK | DDR_PHY_ZQCR_ZQREFPEN_MASK | DDR_PHY_ZQCR_ZQREFIEN_MASK | DDR_PHY_ZQCR_ODT_MODE_MASK | DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_MASK | DDR_PHY_ZQCR_IODLMT_MASK | DDR_PHY_ZQCR_AVGEN_MASK | DDR_PHY_ZQCR_AVGMAX_MASK | DDR_PHY_ZQCR_ZCALT_MASK | DDR_PHY_ZQCR_ZQPD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQCR_RESERVED_31_26_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZQREFISELRANGE_SHIFT
+			| 0x00000011U << DDR_PHY_ZQCR_PGWAIT_FRQB_SHIFT
+			| 0x00000011U << DDR_PHY_ZQCR_PGWAIT_FRQA_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZQREFPEN_SHIFT
+			| 0x00000001U << DDR_PHY_ZQCR_ZQREFIEN_SHIFT
+			| 0x00000001U << DDR_PHY_ZQCR_ODT_MODE_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_SHIFT
+			| 0x00000002U << DDR_PHY_ZQCR_IODLMT_SHIFT
+			| 0x00000001U << DDR_PHY_ZQCR_AVGEN_SHIFT
+			| 0x00000002U << DDR_PHY_ZQCR_AVGMAX_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZCALT_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZQPD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQCR_OFFSET ,0xFFFFFFFFU ,0x008A2A58U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ0PR0 @ 0XFD080684

+
+		Pull-down drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PD_DRV_ZDEN                                                  0x0
+
+		Pull-up drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PU_DRV_ZDEN                                                  0x0
+
+		Pull-down termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PD_ODT_ZDEN                                                  0x0
+
+		Pull-up termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PU_ODT_ZDEN                                                  0x0
+
+		Calibration segment bypass
+		PSU_DDR_PHY_ZQ0PR0_ZSEGBYP                                                      0x0
+
+		VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
+		PSU_DDR_PHY_ZQ0PR0_ZLE_MODE                                                     0x0
+
+		Termination adjustment
+		PSU_DDR_PHY_ZQ0PR0_ODT_ADJUST                                                   0x0
+
+		Pulldown drive strength adjustment
+		PSU_DDR_PHY_ZQ0PR0_PD_DRV_ADJUST                                                0x0
+
+		Pullup drive strength adjustment
+		PSU_DDR_PHY_ZQ0PR0_PU_DRV_ADJUST                                                0x0
+
+		DRAM Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT                                               0x7
+
+		HOST Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT                                               0x7
+
+		Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD                                            0xd
+
+		Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU                                            0xd
+
+		ZQ n Impedance Control Program Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080684, 0xFFFFFFFFU ,0x000077DDU)  
+		RegMask = (DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_MASK | DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_MASK | DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_MASK | DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_MASK | DDR_PHY_ZQ0PR0_ZSEGBYP_MASK | DDR_PHY_ZQ0PR0_ZLE_MODE_MASK | DDR_PHY_ZQ0PR0_ODT_ADJUST_MASK | DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_MASK | DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_MASK | DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_MASK | DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_MASK | DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_MASK | DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_ZSEGBYP_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_ZLE_MODE_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_ODT_ADJUST_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_SHIFT
+			| 0x00000007U << DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_SHIFT
+			| 0x00000007U << DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_SHIFT
+			| 0x0000000DU << DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_SHIFT
+			| 0x0000000DU << DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ0PR0_OFFSET ,0xFFFFFFFFU ,0x000077DDU);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ0OR0 @ 0XFD080694

+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR0_RESERVED_31_26                                               0x0
+
+		Override value for the pull-up output impedance
+		PSU_DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD                                            0x1e1
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR0_RESERVED_15_10                                               0x0
+
+		Override value for the pull-down output impedance
+		PSU_DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD                                            0x210
+
+		ZQ n Impedance Control Override Data Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080694, 0xFFFFFFFFU ,0x01E10210U)  
+		RegMask = (DDR_PHY_ZQ0OR0_RESERVED_31_26_MASK | DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_MASK | DDR_PHY_ZQ0OR0_RESERVED_15_10_MASK | DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ0OR0_RESERVED_31_26_SHIFT
+			| 0x000001E1U << DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0OR0_RESERVED_15_10_SHIFT
+			| 0x00000210U << DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ0OR0_OFFSET ,0xFFFFFFFFU ,0x01E10210U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ0OR1 @ 0XFD080698

+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR1_RESERVED_31_26                                               0x0
+
+		Override value for the pull-up termination
+		PSU_DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD                                            0x1e1
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR1_RESERVED_15_10                                               0x0
+
+		Override value for the pull-down termination
+		PSU_DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD                                            0x0
+
+		ZQ n Impedance Control Override Data Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080698, 0xFFFFFFFFU ,0x01E10000U)  
+		RegMask = (DDR_PHY_ZQ0OR1_RESERVED_31_26_MASK | DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_MASK | DDR_PHY_ZQ0OR1_RESERVED_15_10_MASK | DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ0OR1_RESERVED_31_26_SHIFT
+			| 0x000001E1U << DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0OR1_RESERVED_15_10_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ0OR1_OFFSET ,0xFFFFFFFFU ,0x01E10000U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ1PR0 @ 0XFD0806A4

+
+		Pull-down drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PD_DRV_ZDEN                                                  0x0
+
+		Pull-up drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PU_DRV_ZDEN                                                  0x0
+
+		Pull-down termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PD_ODT_ZDEN                                                  0x0
+
+		Pull-up termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PU_ODT_ZDEN                                                  0x0
+
+		Calibration segment bypass
+		PSU_DDR_PHY_ZQ1PR0_ZSEGBYP                                                      0x0
+
+		VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
+		PSU_DDR_PHY_ZQ1PR0_ZLE_MODE                                                     0x0
+
+		Termination adjustment
+		PSU_DDR_PHY_ZQ1PR0_ODT_ADJUST                                                   0x0
+
+		Pulldown drive strength adjustment
+		PSU_DDR_PHY_ZQ1PR0_PD_DRV_ADJUST                                                0x1
+
+		Pullup drive strength adjustment
+		PSU_DDR_PHY_ZQ1PR0_PU_DRV_ADJUST                                                0x0
+
+		DRAM Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT                                               0x7
+
+		HOST Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT                                               0xb
+
+		Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD                                            0xd
+
+		Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU                                            0xb
+
+		ZQ n Impedance Control Program Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0806A4, 0xFFFFFFFFU ,0x00087BDBU)  
+		RegMask = (DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_MASK | DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_MASK | DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_MASK | DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_MASK | DDR_PHY_ZQ1PR0_ZSEGBYP_MASK | DDR_PHY_ZQ1PR0_ZLE_MODE_MASK | DDR_PHY_ZQ1PR0_ODT_ADJUST_MASK | DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_MASK | DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_MASK | DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_MASK | DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_MASK | DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_MASK | DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_ZSEGBYP_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_ZLE_MODE_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_ODT_ADJUST_SHIFT
+			| 0x00000001U << DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_SHIFT
+			| 0x00000007U << DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_SHIFT
+			| 0x0000000BU << DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_SHIFT
+			| 0x0000000DU << DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_SHIFT
+			| 0x0000000BU << DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ1PR0_OFFSET ,0xFFFFFFFFU ,0x00087BDBU);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR0 @ 0XFD080700

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX0GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX0GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX0GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX0GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX0GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX0GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX0GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX0GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX0GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX0GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX0GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX0GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX0GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX0GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080700, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX0GCR0_CALBYP_MASK | DDR_PHY_DX0GCR0_MDLEN_MASK | DDR_PHY_DX0GCR0_CODTSHFT_MASK | DDR_PHY_DX0GCR0_DQSDCC_MASK | DDR_PHY_DX0GCR0_RDDLY_MASK | DDR_PHY_DX0GCR0_RESERVED_19_14_MASK | DDR_PHY_DX0GCR0_DQSNSEPDR_MASK | DDR_PHY_DX0GCR0_DQSSEPDR_MASK | DDR_PHY_DX0GCR0_RTTOAL_MASK | DDR_PHY_DX0GCR0_RTTOH_MASK | DDR_PHY_DX0GCR0_CPDRSHFT_MASK | DDR_PHY_DX0GCR0_DQSRPD_MASK | DDR_PHY_DX0GCR0_DQSGPDR_MASK | DDR_PHY_DX0GCR0_RESERVED_4_MASK | DDR_PHY_DX0GCR0_DQSGODT_MASK | DDR_PHY_DX0GCR0_DQSGOE_MASK | DDR_PHY_DX0GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX0GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX0GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR4 @ 0XFD080710

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX0GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX0GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX0GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX0GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX0GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX0GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX0GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX0GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX0GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX0GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080710, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX0GCR4_RESERVED_31_29_MASK | DDR_PHY_DX0GCR4_DXREFPEN_MASK | DDR_PHY_DX0GCR4_DXREFEEN_MASK | DDR_PHY_DX0GCR4_DXREFSEN_MASK | DDR_PHY_DX0GCR4_RESERVED_24_MASK | DDR_PHY_DX0GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX0GCR4_DXREFESEL_MASK | DDR_PHY_DX0GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX0GCR4_DXREFSSEL_MASK | DDR_PHY_DX0GCR4_RESERVED_7_6_MASK | DDR_PHY_DX0GCR4_DXREFIEN_MASK | DDR_PHY_DX0GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX0GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX0GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX0GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR5 @ 0XFD080714

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080714, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX0GCR5_RESERVED_31_MASK | DDR_PHY_DX0GCR5_DXREFISELR3_MASK | DDR_PHY_DX0GCR5_RESERVED_23_MASK | DDR_PHY_DX0GCR5_DXREFISELR2_MASK | DDR_PHY_DX0GCR5_RESERVED_15_MASK | DDR_PHY_DX0GCR5_DXREFISELR1_MASK | DDR_PHY_DX0GCR5_RESERVED_7_MASK | DDR_PHY_DX0GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR6 @ 0XFD080718

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080718, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX0GCR6_RESERVED_31_30_MASK | DDR_PHY_DX0GCR6_DXDQVREFR3_MASK | DDR_PHY_DX0GCR6_RESERVED_23_22_MASK | DDR_PHY_DX0GCR6_DXDQVREFR2_MASK | DDR_PHY_DX0GCR6_RESERVED_15_14_MASK | DDR_PHY_DX0GCR6_DXDQVREFR1_MASK | DDR_PHY_DX0GCR6_RESERVED_7_6_MASK | DDR_PHY_DX0GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX0GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX0GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX0LCDLR2 @ 0XFD080788

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX0LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX0LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080788, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX0LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX0LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX0LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX0LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX0LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GTR0 @ 0XFD0807C0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX0GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX0GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX0GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0807C0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX0GTR0_RESERVED_31_24_MASK | DDR_PHY_DX0GTR0_WDQSL_MASK | DDR_PHY_DX0GTR0_RESERVED_23_20_MASK | DDR_PHY_DX0GTR0_WLSL_MASK | DDR_PHY_DX0GTR0_RESERVED_15_13_MASK | DDR_PHY_DX0GTR0_RESERVED_12_8_MASK | DDR_PHY_DX0GTR0_RESERVED_7_5_MASK | DDR_PHY_DX0GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX0GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR0 @ 0XFD080800

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX1GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX1GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX1GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX1GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX1GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX1GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX1GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX1GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX1GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX1GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX1GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX1GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX1GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX1GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080800, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX1GCR0_CALBYP_MASK | DDR_PHY_DX1GCR0_MDLEN_MASK | DDR_PHY_DX1GCR0_CODTSHFT_MASK | DDR_PHY_DX1GCR0_DQSDCC_MASK | DDR_PHY_DX1GCR0_RDDLY_MASK | DDR_PHY_DX1GCR0_RESERVED_19_14_MASK | DDR_PHY_DX1GCR0_DQSNSEPDR_MASK | DDR_PHY_DX1GCR0_DQSSEPDR_MASK | DDR_PHY_DX1GCR0_RTTOAL_MASK | DDR_PHY_DX1GCR0_RTTOH_MASK | DDR_PHY_DX1GCR0_CPDRSHFT_MASK | DDR_PHY_DX1GCR0_DQSRPD_MASK | DDR_PHY_DX1GCR0_DQSGPDR_MASK | DDR_PHY_DX1GCR0_RESERVED_4_MASK | DDR_PHY_DX1GCR0_DQSGODT_MASK | DDR_PHY_DX1GCR0_DQSGOE_MASK | DDR_PHY_DX1GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX1GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX1GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR4 @ 0XFD080810

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX1GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX1GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX1GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX1GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX1GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX1GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX1GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX1GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX1GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX1GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080810, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX1GCR4_RESERVED_31_29_MASK | DDR_PHY_DX1GCR4_DXREFPEN_MASK | DDR_PHY_DX1GCR4_DXREFEEN_MASK | DDR_PHY_DX1GCR4_DXREFSEN_MASK | DDR_PHY_DX1GCR4_RESERVED_24_MASK | DDR_PHY_DX1GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX1GCR4_DXREFESEL_MASK | DDR_PHY_DX1GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX1GCR4_DXREFSSEL_MASK | DDR_PHY_DX1GCR4_RESERVED_7_6_MASK | DDR_PHY_DX1GCR4_DXREFIEN_MASK | DDR_PHY_DX1GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX1GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX1GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX1GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR5 @ 0XFD080814

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080814, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX1GCR5_RESERVED_31_MASK | DDR_PHY_DX1GCR5_DXREFISELR3_MASK | DDR_PHY_DX1GCR5_RESERVED_23_MASK | DDR_PHY_DX1GCR5_DXREFISELR2_MASK | DDR_PHY_DX1GCR5_RESERVED_15_MASK | DDR_PHY_DX1GCR5_DXREFISELR1_MASK | DDR_PHY_DX1GCR5_RESERVED_7_MASK | DDR_PHY_DX1GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR6 @ 0XFD080818

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080818, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX1GCR6_RESERVED_31_30_MASK | DDR_PHY_DX1GCR6_DXDQVREFR3_MASK | DDR_PHY_DX1GCR6_RESERVED_23_22_MASK | DDR_PHY_DX1GCR6_DXDQVREFR2_MASK | DDR_PHY_DX1GCR6_RESERVED_15_14_MASK | DDR_PHY_DX1GCR6_DXDQVREFR1_MASK | DDR_PHY_DX1GCR6_RESERVED_7_6_MASK | DDR_PHY_DX1GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX1GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX1GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX1LCDLR2 @ 0XFD080888

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX1LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX1LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080888, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX1LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX1LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX1LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX1LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX1LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GTR0 @ 0XFD0808C0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX1GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX1GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX1GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0808C0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX1GTR0_RESERVED_31_24_MASK | DDR_PHY_DX1GTR0_WDQSL_MASK | DDR_PHY_DX1GTR0_RESERVED_23_20_MASK | DDR_PHY_DX1GTR0_WLSL_MASK | DDR_PHY_DX1GTR0_RESERVED_15_13_MASK | DDR_PHY_DX1GTR0_RESERVED_12_8_MASK | DDR_PHY_DX1GTR0_RESERVED_7_5_MASK | DDR_PHY_DX1GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX1GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR0 @ 0XFD080900

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX2GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX2GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX2GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX2GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX2GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX2GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX2GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX2GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX2GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX2GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX2GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX2GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX2GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX2GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080900, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX2GCR0_CALBYP_MASK | DDR_PHY_DX2GCR0_MDLEN_MASK | DDR_PHY_DX2GCR0_CODTSHFT_MASK | DDR_PHY_DX2GCR0_DQSDCC_MASK | DDR_PHY_DX2GCR0_RDDLY_MASK | DDR_PHY_DX2GCR0_RESERVED_19_14_MASK | DDR_PHY_DX2GCR0_DQSNSEPDR_MASK | DDR_PHY_DX2GCR0_DQSSEPDR_MASK | DDR_PHY_DX2GCR0_RTTOAL_MASK | DDR_PHY_DX2GCR0_RTTOH_MASK | DDR_PHY_DX2GCR0_CPDRSHFT_MASK | DDR_PHY_DX2GCR0_DQSRPD_MASK | DDR_PHY_DX2GCR0_DQSGPDR_MASK | DDR_PHY_DX2GCR0_RESERVED_4_MASK | DDR_PHY_DX2GCR0_DQSGODT_MASK | DDR_PHY_DX2GCR0_DQSGOE_MASK | DDR_PHY_DX2GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX2GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX2GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR1 @ 0XFD080904

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX2GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX2GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX2GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX2GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX2GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX2GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX2GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX2GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX2GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX2GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080904, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX2GCR1_DXPDRMODE_MASK | DDR_PHY_DX2GCR1_RESERVED_15_MASK | DDR_PHY_DX2GCR1_QSNSEL_MASK | DDR_PHY_DX2GCR1_QSSEL_MASK | DDR_PHY_DX2GCR1_OEEN_MASK | DDR_PHY_DX2GCR1_PDREN_MASK | DDR_PHY_DX2GCR1_TEEN_MASK | DDR_PHY_DX2GCR1_DSEN_MASK | DDR_PHY_DX2GCR1_DMEN_MASK | DDR_PHY_DX2GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX2GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR4 @ 0XFD080910

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX2GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX2GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX2GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX2GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX2GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX2GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX2GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX2GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX2GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX2GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080910, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX2GCR4_RESERVED_31_29_MASK | DDR_PHY_DX2GCR4_DXREFPEN_MASK | DDR_PHY_DX2GCR4_DXREFEEN_MASK | DDR_PHY_DX2GCR4_DXREFSEN_MASK | DDR_PHY_DX2GCR4_RESERVED_24_MASK | DDR_PHY_DX2GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX2GCR4_DXREFESEL_MASK | DDR_PHY_DX2GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX2GCR4_DXREFSSEL_MASK | DDR_PHY_DX2GCR4_RESERVED_7_6_MASK | DDR_PHY_DX2GCR4_DXREFIEN_MASK | DDR_PHY_DX2GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX2GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX2GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX2GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR5 @ 0XFD080914

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080914, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX2GCR5_RESERVED_31_MASK | DDR_PHY_DX2GCR5_DXREFISELR3_MASK | DDR_PHY_DX2GCR5_RESERVED_23_MASK | DDR_PHY_DX2GCR5_DXREFISELR2_MASK | DDR_PHY_DX2GCR5_RESERVED_15_MASK | DDR_PHY_DX2GCR5_DXREFISELR1_MASK | DDR_PHY_DX2GCR5_RESERVED_7_MASK | DDR_PHY_DX2GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR6 @ 0XFD080918

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080918, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX2GCR6_RESERVED_31_30_MASK | DDR_PHY_DX2GCR6_DXDQVREFR3_MASK | DDR_PHY_DX2GCR6_RESERVED_23_22_MASK | DDR_PHY_DX2GCR6_DXDQVREFR2_MASK | DDR_PHY_DX2GCR6_RESERVED_15_14_MASK | DDR_PHY_DX2GCR6_DXDQVREFR1_MASK | DDR_PHY_DX2GCR6_RESERVED_7_6_MASK | DDR_PHY_DX2GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX2GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX2GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX2LCDLR2 @ 0XFD080988

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX2LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX2LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080988, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX2LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX2LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX2LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX2LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX2LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GTR0 @ 0XFD0809C0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX2GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX2GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX2GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0809C0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX2GTR0_RESERVED_31_24_MASK | DDR_PHY_DX2GTR0_WDQSL_MASK | DDR_PHY_DX2GTR0_RESERVED_23_20_MASK | DDR_PHY_DX2GTR0_WLSL_MASK | DDR_PHY_DX2GTR0_RESERVED_15_13_MASK | DDR_PHY_DX2GTR0_RESERVED_12_8_MASK | DDR_PHY_DX2GTR0_RESERVED_7_5_MASK | DDR_PHY_DX2GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX2GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR0 @ 0XFD080A00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX3GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX3GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX3GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX3GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX3GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX3GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX3GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX3GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX3GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX3GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX3GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX3GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX3GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX3GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080A00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX3GCR0_CALBYP_MASK | DDR_PHY_DX3GCR0_MDLEN_MASK | DDR_PHY_DX3GCR0_CODTSHFT_MASK | DDR_PHY_DX3GCR0_DQSDCC_MASK | DDR_PHY_DX3GCR0_RDDLY_MASK | DDR_PHY_DX3GCR0_RESERVED_19_14_MASK | DDR_PHY_DX3GCR0_DQSNSEPDR_MASK | DDR_PHY_DX3GCR0_DQSSEPDR_MASK | DDR_PHY_DX3GCR0_RTTOAL_MASK | DDR_PHY_DX3GCR0_RTTOH_MASK | DDR_PHY_DX3GCR0_CPDRSHFT_MASK | DDR_PHY_DX3GCR0_DQSRPD_MASK | DDR_PHY_DX3GCR0_DQSGPDR_MASK | DDR_PHY_DX3GCR0_RESERVED_4_MASK | DDR_PHY_DX3GCR0_DQSGODT_MASK | DDR_PHY_DX3GCR0_DQSGOE_MASK | DDR_PHY_DX3GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX3GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX3GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR1 @ 0XFD080A04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX3GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX3GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX3GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX3GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX3GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX3GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX3GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX3GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX3GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX3GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080A04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX3GCR1_DXPDRMODE_MASK | DDR_PHY_DX3GCR1_RESERVED_15_MASK | DDR_PHY_DX3GCR1_QSNSEL_MASK | DDR_PHY_DX3GCR1_QSSEL_MASK | DDR_PHY_DX3GCR1_OEEN_MASK | DDR_PHY_DX3GCR1_PDREN_MASK | DDR_PHY_DX3GCR1_TEEN_MASK | DDR_PHY_DX3GCR1_DSEN_MASK | DDR_PHY_DX3GCR1_DMEN_MASK | DDR_PHY_DX3GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX3GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR4 @ 0XFD080A10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX3GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX3GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX3GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX3GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX3GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX3GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX3GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX3GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX3GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX3GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080A10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX3GCR4_RESERVED_31_29_MASK | DDR_PHY_DX3GCR4_DXREFPEN_MASK | DDR_PHY_DX3GCR4_DXREFEEN_MASK | DDR_PHY_DX3GCR4_DXREFSEN_MASK | DDR_PHY_DX3GCR4_RESERVED_24_MASK | DDR_PHY_DX3GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX3GCR4_DXREFESEL_MASK | DDR_PHY_DX3GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX3GCR4_DXREFSSEL_MASK | DDR_PHY_DX3GCR4_RESERVED_7_6_MASK | DDR_PHY_DX3GCR4_DXREFIEN_MASK | DDR_PHY_DX3GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX3GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX3GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX3GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR5 @ 0XFD080A14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080A14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX3GCR5_RESERVED_31_MASK | DDR_PHY_DX3GCR5_DXREFISELR3_MASK | DDR_PHY_DX3GCR5_RESERVED_23_MASK | DDR_PHY_DX3GCR5_DXREFISELR2_MASK | DDR_PHY_DX3GCR5_RESERVED_15_MASK | DDR_PHY_DX3GCR5_DXREFISELR1_MASK | DDR_PHY_DX3GCR5_RESERVED_7_MASK | DDR_PHY_DX3GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR6 @ 0XFD080A18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080A18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX3GCR6_RESERVED_31_30_MASK | DDR_PHY_DX3GCR6_DXDQVREFR3_MASK | DDR_PHY_DX3GCR6_RESERVED_23_22_MASK | DDR_PHY_DX3GCR6_DXDQVREFR2_MASK | DDR_PHY_DX3GCR6_RESERVED_15_14_MASK | DDR_PHY_DX3GCR6_DXDQVREFR1_MASK | DDR_PHY_DX3GCR6_RESERVED_7_6_MASK | DDR_PHY_DX3GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX3GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX3GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX3LCDLR2 @ 0XFD080A88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX3LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX3LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080A88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX3LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX3LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX3LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX3LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX3LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GTR0 @ 0XFD080AC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX3GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX3GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX3GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080AC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX3GTR0_RESERVED_31_24_MASK | DDR_PHY_DX3GTR0_WDQSL_MASK | DDR_PHY_DX3GTR0_RESERVED_23_20_MASK | DDR_PHY_DX3GTR0_WLSL_MASK | DDR_PHY_DX3GTR0_RESERVED_15_13_MASK | DDR_PHY_DX3GTR0_RESERVED_12_8_MASK | DDR_PHY_DX3GTR0_RESERVED_7_5_MASK | DDR_PHY_DX3GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX3GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR0 @ 0XFD080B00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX4GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX4GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX4GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX4GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX4GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX4GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX4GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX4GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX4GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX4GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX4GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX4GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX4GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX4GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080B00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX4GCR0_CALBYP_MASK | DDR_PHY_DX4GCR0_MDLEN_MASK | DDR_PHY_DX4GCR0_CODTSHFT_MASK | DDR_PHY_DX4GCR0_DQSDCC_MASK | DDR_PHY_DX4GCR0_RDDLY_MASK | DDR_PHY_DX4GCR0_RESERVED_19_14_MASK | DDR_PHY_DX4GCR0_DQSNSEPDR_MASK | DDR_PHY_DX4GCR0_DQSSEPDR_MASK | DDR_PHY_DX4GCR0_RTTOAL_MASK | DDR_PHY_DX4GCR0_RTTOH_MASK | DDR_PHY_DX4GCR0_CPDRSHFT_MASK | DDR_PHY_DX4GCR0_DQSRPD_MASK | DDR_PHY_DX4GCR0_DQSGPDR_MASK | DDR_PHY_DX4GCR0_RESERVED_4_MASK | DDR_PHY_DX4GCR0_DQSGODT_MASK | DDR_PHY_DX4GCR0_DQSGOE_MASK | DDR_PHY_DX4GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX4GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX4GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR1 @ 0XFD080B04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX4GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX4GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX4GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX4GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX4GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX4GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX4GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX4GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX4GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX4GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080B04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX4GCR1_DXPDRMODE_MASK | DDR_PHY_DX4GCR1_RESERVED_15_MASK | DDR_PHY_DX4GCR1_QSNSEL_MASK | DDR_PHY_DX4GCR1_QSSEL_MASK | DDR_PHY_DX4GCR1_OEEN_MASK | DDR_PHY_DX4GCR1_PDREN_MASK | DDR_PHY_DX4GCR1_TEEN_MASK | DDR_PHY_DX4GCR1_DSEN_MASK | DDR_PHY_DX4GCR1_DMEN_MASK | DDR_PHY_DX4GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX4GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR4 @ 0XFD080B10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX4GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX4GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX4GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX4GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX4GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX4GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX4GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX4GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX4GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX4GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080B10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX4GCR4_RESERVED_31_29_MASK | DDR_PHY_DX4GCR4_DXREFPEN_MASK | DDR_PHY_DX4GCR4_DXREFEEN_MASK | DDR_PHY_DX4GCR4_DXREFSEN_MASK | DDR_PHY_DX4GCR4_RESERVED_24_MASK | DDR_PHY_DX4GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX4GCR4_DXREFESEL_MASK | DDR_PHY_DX4GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX4GCR4_DXREFSSEL_MASK | DDR_PHY_DX4GCR4_RESERVED_7_6_MASK | DDR_PHY_DX4GCR4_DXREFIEN_MASK | DDR_PHY_DX4GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX4GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX4GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX4GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR5 @ 0XFD080B14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080B14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX4GCR5_RESERVED_31_MASK | DDR_PHY_DX4GCR5_DXREFISELR3_MASK | DDR_PHY_DX4GCR5_RESERVED_23_MASK | DDR_PHY_DX4GCR5_DXREFISELR2_MASK | DDR_PHY_DX4GCR5_RESERVED_15_MASK | DDR_PHY_DX4GCR5_DXREFISELR1_MASK | DDR_PHY_DX4GCR5_RESERVED_7_MASK | DDR_PHY_DX4GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR6 @ 0XFD080B18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080B18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX4GCR6_RESERVED_31_30_MASK | DDR_PHY_DX4GCR6_DXDQVREFR3_MASK | DDR_PHY_DX4GCR6_RESERVED_23_22_MASK | DDR_PHY_DX4GCR6_DXDQVREFR2_MASK | DDR_PHY_DX4GCR6_RESERVED_15_14_MASK | DDR_PHY_DX4GCR6_DXDQVREFR1_MASK | DDR_PHY_DX4GCR6_RESERVED_7_6_MASK | DDR_PHY_DX4GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX4GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX4GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX4LCDLR2 @ 0XFD080B88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX4LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX4LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080B88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX4LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX4LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX4LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX4LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX4LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GTR0 @ 0XFD080BC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX4GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX4GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX4GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080BC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX4GTR0_RESERVED_31_24_MASK | DDR_PHY_DX4GTR0_WDQSL_MASK | DDR_PHY_DX4GTR0_RESERVED_23_20_MASK | DDR_PHY_DX4GTR0_WLSL_MASK | DDR_PHY_DX4GTR0_RESERVED_15_13_MASK | DDR_PHY_DX4GTR0_RESERVED_12_8_MASK | DDR_PHY_DX4GTR0_RESERVED_7_5_MASK | DDR_PHY_DX4GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX4GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR0 @ 0XFD080C00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX5GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX5GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX5GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX5GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX5GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX5GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX5GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX5GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX5GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX5GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX5GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX5GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX5GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX5GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080C00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX5GCR0_CALBYP_MASK | DDR_PHY_DX5GCR0_MDLEN_MASK | DDR_PHY_DX5GCR0_CODTSHFT_MASK | DDR_PHY_DX5GCR0_DQSDCC_MASK | DDR_PHY_DX5GCR0_RDDLY_MASK | DDR_PHY_DX5GCR0_RESERVED_19_14_MASK | DDR_PHY_DX5GCR0_DQSNSEPDR_MASK | DDR_PHY_DX5GCR0_DQSSEPDR_MASK | DDR_PHY_DX5GCR0_RTTOAL_MASK | DDR_PHY_DX5GCR0_RTTOH_MASK | DDR_PHY_DX5GCR0_CPDRSHFT_MASK | DDR_PHY_DX5GCR0_DQSRPD_MASK | DDR_PHY_DX5GCR0_DQSGPDR_MASK | DDR_PHY_DX5GCR0_RESERVED_4_MASK | DDR_PHY_DX5GCR0_DQSGODT_MASK | DDR_PHY_DX5GCR0_DQSGOE_MASK | DDR_PHY_DX5GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX5GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX5GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR1 @ 0XFD080C04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX5GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX5GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX5GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX5GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX5GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX5GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX5GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX5GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX5GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX5GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080C04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX5GCR1_DXPDRMODE_MASK | DDR_PHY_DX5GCR1_RESERVED_15_MASK | DDR_PHY_DX5GCR1_QSNSEL_MASK | DDR_PHY_DX5GCR1_QSSEL_MASK | DDR_PHY_DX5GCR1_OEEN_MASK | DDR_PHY_DX5GCR1_PDREN_MASK | DDR_PHY_DX5GCR1_TEEN_MASK | DDR_PHY_DX5GCR1_DSEN_MASK | DDR_PHY_DX5GCR1_DMEN_MASK | DDR_PHY_DX5GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX5GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR4 @ 0XFD080C10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX5GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX5GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX5GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX5GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX5GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX5GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX5GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX5GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX5GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX5GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080C10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX5GCR4_RESERVED_31_29_MASK | DDR_PHY_DX5GCR4_DXREFPEN_MASK | DDR_PHY_DX5GCR4_DXREFEEN_MASK | DDR_PHY_DX5GCR4_DXREFSEN_MASK | DDR_PHY_DX5GCR4_RESERVED_24_MASK | DDR_PHY_DX5GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX5GCR4_DXREFESEL_MASK | DDR_PHY_DX5GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX5GCR4_DXREFSSEL_MASK | DDR_PHY_DX5GCR4_RESERVED_7_6_MASK | DDR_PHY_DX5GCR4_DXREFIEN_MASK | DDR_PHY_DX5GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX5GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX5GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX5GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR5 @ 0XFD080C14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080C14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX5GCR5_RESERVED_31_MASK | DDR_PHY_DX5GCR5_DXREFISELR3_MASK | DDR_PHY_DX5GCR5_RESERVED_23_MASK | DDR_PHY_DX5GCR5_DXREFISELR2_MASK | DDR_PHY_DX5GCR5_RESERVED_15_MASK | DDR_PHY_DX5GCR5_DXREFISELR1_MASK | DDR_PHY_DX5GCR5_RESERVED_7_MASK | DDR_PHY_DX5GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR6 @ 0XFD080C18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080C18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX5GCR6_RESERVED_31_30_MASK | DDR_PHY_DX5GCR6_DXDQVREFR3_MASK | DDR_PHY_DX5GCR6_RESERVED_23_22_MASK | DDR_PHY_DX5GCR6_DXDQVREFR2_MASK | DDR_PHY_DX5GCR6_RESERVED_15_14_MASK | DDR_PHY_DX5GCR6_DXDQVREFR1_MASK | DDR_PHY_DX5GCR6_RESERVED_7_6_MASK | DDR_PHY_DX5GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX5GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX5GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX5LCDLR2 @ 0XFD080C88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX5LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX5LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080C88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX5LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX5LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX5LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX5LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX5LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GTR0 @ 0XFD080CC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX5GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX5GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX5GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080CC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX5GTR0_RESERVED_31_24_MASK | DDR_PHY_DX5GTR0_WDQSL_MASK | DDR_PHY_DX5GTR0_RESERVED_23_20_MASK | DDR_PHY_DX5GTR0_WLSL_MASK | DDR_PHY_DX5GTR0_RESERVED_15_13_MASK | DDR_PHY_DX5GTR0_RESERVED_12_8_MASK | DDR_PHY_DX5GTR0_RESERVED_7_5_MASK | DDR_PHY_DX5GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX5GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR0 @ 0XFD080D00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX6GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX6GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX6GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX6GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX6GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX6GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX6GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX6GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX6GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX6GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX6GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX6GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX6GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX6GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080D00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX6GCR0_CALBYP_MASK | DDR_PHY_DX6GCR0_MDLEN_MASK | DDR_PHY_DX6GCR0_CODTSHFT_MASK | DDR_PHY_DX6GCR0_DQSDCC_MASK | DDR_PHY_DX6GCR0_RDDLY_MASK | DDR_PHY_DX6GCR0_RESERVED_19_14_MASK | DDR_PHY_DX6GCR0_DQSNSEPDR_MASK | DDR_PHY_DX6GCR0_DQSSEPDR_MASK | DDR_PHY_DX6GCR0_RTTOAL_MASK | DDR_PHY_DX6GCR0_RTTOH_MASK | DDR_PHY_DX6GCR0_CPDRSHFT_MASK | DDR_PHY_DX6GCR0_DQSRPD_MASK | DDR_PHY_DX6GCR0_DQSGPDR_MASK | DDR_PHY_DX6GCR0_RESERVED_4_MASK | DDR_PHY_DX6GCR0_DQSGODT_MASK | DDR_PHY_DX6GCR0_DQSGOE_MASK | DDR_PHY_DX6GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX6GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX6GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR1 @ 0XFD080D04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX6GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX6GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX6GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX6GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX6GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX6GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX6GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX6GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX6GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX6GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080D04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX6GCR1_DXPDRMODE_MASK | DDR_PHY_DX6GCR1_RESERVED_15_MASK | DDR_PHY_DX6GCR1_QSNSEL_MASK | DDR_PHY_DX6GCR1_QSSEL_MASK | DDR_PHY_DX6GCR1_OEEN_MASK | DDR_PHY_DX6GCR1_PDREN_MASK | DDR_PHY_DX6GCR1_TEEN_MASK | DDR_PHY_DX6GCR1_DSEN_MASK | DDR_PHY_DX6GCR1_DMEN_MASK | DDR_PHY_DX6GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX6GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR4 @ 0XFD080D10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX6GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX6GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX6GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX6GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX6GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX6GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX6GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX6GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX6GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX6GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080D10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX6GCR4_RESERVED_31_29_MASK | DDR_PHY_DX6GCR4_DXREFPEN_MASK | DDR_PHY_DX6GCR4_DXREFEEN_MASK | DDR_PHY_DX6GCR4_DXREFSEN_MASK | DDR_PHY_DX6GCR4_RESERVED_24_MASK | DDR_PHY_DX6GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX6GCR4_DXREFESEL_MASK | DDR_PHY_DX6GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX6GCR4_DXREFSSEL_MASK | DDR_PHY_DX6GCR4_RESERVED_7_6_MASK | DDR_PHY_DX6GCR4_DXREFIEN_MASK | DDR_PHY_DX6GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX6GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX6GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX6GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR5 @ 0XFD080D14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080D14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX6GCR5_RESERVED_31_MASK | DDR_PHY_DX6GCR5_DXREFISELR3_MASK | DDR_PHY_DX6GCR5_RESERVED_23_MASK | DDR_PHY_DX6GCR5_DXREFISELR2_MASK | DDR_PHY_DX6GCR5_RESERVED_15_MASK | DDR_PHY_DX6GCR5_DXREFISELR1_MASK | DDR_PHY_DX6GCR5_RESERVED_7_MASK | DDR_PHY_DX6GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR6 @ 0XFD080D18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080D18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX6GCR6_RESERVED_31_30_MASK | DDR_PHY_DX6GCR6_DXDQVREFR3_MASK | DDR_PHY_DX6GCR6_RESERVED_23_22_MASK | DDR_PHY_DX6GCR6_DXDQVREFR2_MASK | DDR_PHY_DX6GCR6_RESERVED_15_14_MASK | DDR_PHY_DX6GCR6_DXDQVREFR1_MASK | DDR_PHY_DX6GCR6_RESERVED_7_6_MASK | DDR_PHY_DX6GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX6GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX6GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX6LCDLR2 @ 0XFD080D88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX6LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX6LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080D88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX6LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX6LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX6LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX6LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX6LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GTR0 @ 0XFD080DC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX6GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX6GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX6GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080DC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX6GTR0_RESERVED_31_24_MASK | DDR_PHY_DX6GTR0_WDQSL_MASK | DDR_PHY_DX6GTR0_RESERVED_23_20_MASK | DDR_PHY_DX6GTR0_WLSL_MASK | DDR_PHY_DX6GTR0_RESERVED_15_13_MASK | DDR_PHY_DX6GTR0_RESERVED_12_8_MASK | DDR_PHY_DX6GTR0_RESERVED_7_5_MASK | DDR_PHY_DX6GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX6GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR0 @ 0XFD080E00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX7GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX7GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX7GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX7GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX7GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX7GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX7GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX7GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX7GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX7GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX7GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX7GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX7GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX7GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080E00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX7GCR0_CALBYP_MASK | DDR_PHY_DX7GCR0_MDLEN_MASK | DDR_PHY_DX7GCR0_CODTSHFT_MASK | DDR_PHY_DX7GCR0_DQSDCC_MASK | DDR_PHY_DX7GCR0_RDDLY_MASK | DDR_PHY_DX7GCR0_RESERVED_19_14_MASK | DDR_PHY_DX7GCR0_DQSNSEPDR_MASK | DDR_PHY_DX7GCR0_DQSSEPDR_MASK | DDR_PHY_DX7GCR0_RTTOAL_MASK | DDR_PHY_DX7GCR0_RTTOH_MASK | DDR_PHY_DX7GCR0_CPDRSHFT_MASK | DDR_PHY_DX7GCR0_DQSRPD_MASK | DDR_PHY_DX7GCR0_DQSGPDR_MASK | DDR_PHY_DX7GCR0_RESERVED_4_MASK | DDR_PHY_DX7GCR0_DQSGODT_MASK | DDR_PHY_DX7GCR0_DQSGOE_MASK | DDR_PHY_DX7GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX7GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX7GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR1 @ 0XFD080E04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX7GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX7GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX7GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX7GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX7GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX7GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX7GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX7GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX7GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX7GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080E04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX7GCR1_DXPDRMODE_MASK | DDR_PHY_DX7GCR1_RESERVED_15_MASK | DDR_PHY_DX7GCR1_QSNSEL_MASK | DDR_PHY_DX7GCR1_QSSEL_MASK | DDR_PHY_DX7GCR1_OEEN_MASK | DDR_PHY_DX7GCR1_PDREN_MASK | DDR_PHY_DX7GCR1_TEEN_MASK | DDR_PHY_DX7GCR1_DSEN_MASK | DDR_PHY_DX7GCR1_DMEN_MASK | DDR_PHY_DX7GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX7GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR4 @ 0XFD080E10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX7GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX7GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX7GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX7GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX7GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX7GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX7GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX7GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX7GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX7GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080E10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX7GCR4_RESERVED_31_29_MASK | DDR_PHY_DX7GCR4_DXREFPEN_MASK | DDR_PHY_DX7GCR4_DXREFEEN_MASK | DDR_PHY_DX7GCR4_DXREFSEN_MASK | DDR_PHY_DX7GCR4_RESERVED_24_MASK | DDR_PHY_DX7GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX7GCR4_DXREFESEL_MASK | DDR_PHY_DX7GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX7GCR4_DXREFSSEL_MASK | DDR_PHY_DX7GCR4_RESERVED_7_6_MASK | DDR_PHY_DX7GCR4_DXREFIEN_MASK | DDR_PHY_DX7GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX7GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX7GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX7GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR5 @ 0XFD080E14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080E14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX7GCR5_RESERVED_31_MASK | DDR_PHY_DX7GCR5_DXREFISELR3_MASK | DDR_PHY_DX7GCR5_RESERVED_23_MASK | DDR_PHY_DX7GCR5_DXREFISELR2_MASK | DDR_PHY_DX7GCR5_RESERVED_15_MASK | DDR_PHY_DX7GCR5_DXREFISELR1_MASK | DDR_PHY_DX7GCR5_RESERVED_7_MASK | DDR_PHY_DX7GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR6 @ 0XFD080E18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080E18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX7GCR6_RESERVED_31_30_MASK | DDR_PHY_DX7GCR6_DXDQVREFR3_MASK | DDR_PHY_DX7GCR6_RESERVED_23_22_MASK | DDR_PHY_DX7GCR6_DXDQVREFR2_MASK | DDR_PHY_DX7GCR6_RESERVED_15_14_MASK | DDR_PHY_DX7GCR6_DXDQVREFR1_MASK | DDR_PHY_DX7GCR6_RESERVED_7_6_MASK | DDR_PHY_DX7GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX7GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX7GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7LCDLR2 @ 0XFD080E88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX7LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX7LCDLR2_DQSGD                                                     0xa
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080E88, 0xFFFFFFFFU ,0x0000000AU)  
+		RegMask = (DDR_PHY_DX7LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX7LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX7LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX7LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_15_9_SHIFT
+			| 0x0000000AU << DDR_PHY_DX7LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7LCDLR2_OFFSET ,0xFFFFFFFFU ,0x0000000AU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GTR0 @ 0XFD080EC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX7GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX7GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX7GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080EC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX7GTR0_RESERVED_31_24_MASK | DDR_PHY_DX7GTR0_WDQSL_MASK | DDR_PHY_DX7GTR0_RESERVED_23_20_MASK | DDR_PHY_DX7GTR0_WLSL_MASK | DDR_PHY_DX7GTR0_RESERVED_15_13_MASK | DDR_PHY_DX7GTR0_RESERVED_12_8_MASK | DDR_PHY_DX7GTR0_RESERVED_7_5_MASK | DDR_PHY_DX7GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX7GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR0 @ 0XFD080F00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX8GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX8GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX8GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX8GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX8GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX8GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX8GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX8GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX8GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX8GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX8GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX8GCR0_DQSGPDR                                                     0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX8GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX8GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080F00, 0xFFFFFFFFU ,0x40800624U)  
+		RegMask = (DDR_PHY_DX8GCR0_CALBYP_MASK | DDR_PHY_DX8GCR0_MDLEN_MASK | DDR_PHY_DX8GCR0_CODTSHFT_MASK | DDR_PHY_DX8GCR0_DQSDCC_MASK | DDR_PHY_DX8GCR0_RDDLY_MASK | DDR_PHY_DX8GCR0_RESERVED_19_14_MASK | DDR_PHY_DX8GCR0_DQSNSEPDR_MASK | DDR_PHY_DX8GCR0_DQSSEPDR_MASK | DDR_PHY_DX8GCR0_RTTOAL_MASK | DDR_PHY_DX8GCR0_RTTOH_MASK | DDR_PHY_DX8GCR0_CPDRSHFT_MASK | DDR_PHY_DX8GCR0_DQSRPD_MASK | DDR_PHY_DX8GCR0_DQSGPDR_MASK | DDR_PHY_DX8GCR0_RESERVED_4_MASK | DDR_PHY_DX8GCR0_DQSGODT_MASK | DDR_PHY_DX8GCR0_DQSGOE_MASK | DDR_PHY_DX8GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX8GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX8GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSRPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR0_OFFSET ,0xFFFFFFFFU ,0x40800624U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR1 @ 0XFD080F04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX8GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX8GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX8GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX8GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX8GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX8GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX8GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX8GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX8GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX8GCR1_DQEN                                                        0x0
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080F04, 0xFFFFFFFFU ,0x00007F00U)  
+		RegMask = (DDR_PHY_DX8GCR1_DXPDRMODE_MASK | DDR_PHY_DX8GCR1_RESERVED_15_MASK | DDR_PHY_DX8GCR1_QSNSEL_MASK | DDR_PHY_DX8GCR1_QSSEL_MASK | DDR_PHY_DX8GCR1_OEEN_MASK | DDR_PHY_DX8GCR1_PDREN_MASK | DDR_PHY_DX8GCR1_TEEN_MASK | DDR_PHY_DX8GCR1_DSEN_MASK | DDR_PHY_DX8GCR1_DMEN_MASK | DDR_PHY_DX8GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_DMEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR1_OFFSET ,0xFFFFFFFFU ,0x00007F00U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR4 @ 0XFD080F10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX8GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX8GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX8GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX8GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX8GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX8GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX8GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX8GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX8GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX8GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080F10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX8GCR4_RESERVED_31_29_MASK | DDR_PHY_DX8GCR4_DXREFPEN_MASK | DDR_PHY_DX8GCR4_DXREFEEN_MASK | DDR_PHY_DX8GCR4_DXREFSEN_MASK | DDR_PHY_DX8GCR4_RESERVED_24_MASK | DDR_PHY_DX8GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX8GCR4_DXREFESEL_MASK | DDR_PHY_DX8GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX8GCR4_DXREFSSEL_MASK | DDR_PHY_DX8GCR4_RESERVED_7_6_MASK | DDR_PHY_DX8GCR4_DXREFIEN_MASK | DDR_PHY_DX8GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX8GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX8GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX8GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR5 @ 0XFD080F14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080F14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX8GCR5_RESERVED_31_MASK | DDR_PHY_DX8GCR5_DXREFISELR3_MASK | DDR_PHY_DX8GCR5_RESERVED_23_MASK | DDR_PHY_DX8GCR5_DXREFISELR2_MASK | DDR_PHY_DX8GCR5_RESERVED_15_MASK | DDR_PHY_DX8GCR5_DXREFISELR1_MASK | DDR_PHY_DX8GCR5_RESERVED_7_MASK | DDR_PHY_DX8GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR6 @ 0XFD080F18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080F18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX8GCR6_RESERVED_31_30_MASK | DDR_PHY_DX8GCR6_DXDQVREFR3_MASK | DDR_PHY_DX8GCR6_RESERVED_23_22_MASK | DDR_PHY_DX8GCR6_DXDQVREFR2_MASK | DDR_PHY_DX8GCR6_RESERVED_15_14_MASK | DDR_PHY_DX8GCR6_DXDQVREFR1_MASK | DDR_PHY_DX8GCR6_RESERVED_7_6_MASK | DDR_PHY_DX8GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX8GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX8GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX8LCDLR2 @ 0XFD080F88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX8LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX8LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080F88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX8LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX8LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX8LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX8LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX8LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GTR0 @ 0XFD080FC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX8GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX8GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX8GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080FC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX8GTR0_RESERVED_31_24_MASK | DDR_PHY_DX8GTR0_WDQSL_MASK | DDR_PHY_DX8GTR0_RESERVED_23_20_MASK | DDR_PHY_DX8GTR0_WLSL_MASK | DDR_PHY_DX8GTR0_RESERVED_15_13_MASK | DDR_PHY_DX8GTR0_RESERVED_12_8_MASK | DDR_PHY_DX8GTR0_RESERVED_7_5_MASK | DDR_PHY_DX8GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX8GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL0DQSCTL @ 0XFD08141C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL0DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL0DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL0DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL0DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL0DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL0DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL0DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL0DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08141C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL0DQSCTL_DXSR_MASK | DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL0DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL0DXCTL2 @ 0XFD08142C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL0DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL0DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL0DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL0DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL0DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL0DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL0DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL0DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL0DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL0DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD08142C, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL0DXCTL2_IOAG_MASK | DDR_PHY_DX8SL0DXCTL2_IOLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL0DXCTL2_RDBI_MASK | DDR_PHY_DX8SL0DXCTL2_WDBI_MASK | DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL0DXCTL2_DISRST_MASK | DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL0DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL0IOCR @ 0XFD081430

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL0IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL0IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL0IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL0IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL0IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD081430, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL0IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL0IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL0IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL0IOCR_DXIOM_MASK | DDR_PHY_DX8SL0IOCR_DXTXM_MASK | DDR_PHY_DX8SL0IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL0IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL0IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL0IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL0IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL1DQSCTL @ 0XFD08145C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL1DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL1DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL1DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL1DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL1DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL1DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL1DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL1DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08145C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL1DQSCTL_DXSR_MASK | DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL1DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL1DXCTL2 @ 0XFD08146C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL1DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL1DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL1DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL1DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL1DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL1DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL1DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL1DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL1DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL1DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD08146C, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL1DXCTL2_IOAG_MASK | DDR_PHY_DX8SL1DXCTL2_IOLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL1DXCTL2_RDBI_MASK | DDR_PHY_DX8SL1DXCTL2_WDBI_MASK | DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL1DXCTL2_DISRST_MASK | DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL1DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL1IOCR @ 0XFD081470

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL1IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL1IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL1IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL1IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL1IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD081470, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL1IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL1IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL1IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL1IOCR_DXIOM_MASK | DDR_PHY_DX8SL1IOCR_DXTXM_MASK | DDR_PHY_DX8SL1IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL1IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL1IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL1IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL1IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL2DQSCTL @ 0XFD08149C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL2DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL2DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL2DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL2DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL2DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL2DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL2DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL2DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08149C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL2DQSCTL_DXSR_MASK | DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL2DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL2DXCTL2 @ 0XFD0814AC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL2DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL2DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL2DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL2DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL2DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL2DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL2DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL2DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL2DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL2DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0814AC, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL2DXCTL2_IOAG_MASK | DDR_PHY_DX8SL2DXCTL2_IOLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL2DXCTL2_RDBI_MASK | DDR_PHY_DX8SL2DXCTL2_WDBI_MASK | DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL2DXCTL2_DISRST_MASK | DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL2DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL2IOCR @ 0XFD0814B0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL2IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL2IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL2IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL2IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL2IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD0814B0, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL2IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL2IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL2IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL2IOCR_DXIOM_MASK | DDR_PHY_DX8SL2IOCR_DXTXM_MASK | DDR_PHY_DX8SL2IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL2IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL2IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL2IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL2IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL3DQSCTL @ 0XFD0814DC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL3DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL3DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL3DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL3DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL3DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL3DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL3DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL3DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0814DC, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL3DQSCTL_DXSR_MASK | DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL3DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL3DXCTL2 @ 0XFD0814EC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL3DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL3DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL3DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL3DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL3DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL3DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL3DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL3DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL3DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL3DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0814EC, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL3DXCTL2_IOAG_MASK | DDR_PHY_DX8SL3DXCTL2_IOLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL3DXCTL2_RDBI_MASK | DDR_PHY_DX8SL3DXCTL2_WDBI_MASK | DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL3DXCTL2_DISRST_MASK | DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL3DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL3IOCR @ 0XFD0814F0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL3IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL3IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL3IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL3IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL3IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD0814F0, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL3IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL3IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL3IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL3IOCR_DXIOM_MASK | DDR_PHY_DX8SL3IOCR_DXTXM_MASK | DDR_PHY_DX8SL3IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL3IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL3IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL3IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL3IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL4DQSCTL @ 0XFD08151C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL4DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL4DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL4DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL4DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL4DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL4DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL4DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL4DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08151C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL4DQSCTL_DXSR_MASK | DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL4DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL4DXCTL2 @ 0XFD08152C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL4DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL4DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL4DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL4DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL4DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL4DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL4DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL4DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL4DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL4DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD08152C, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL4DXCTL2_IOAG_MASK | DDR_PHY_DX8SL4DXCTL2_IOLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL4DXCTL2_RDBI_MASK | DDR_PHY_DX8SL4DXCTL2_WDBI_MASK | DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL4DXCTL2_DISRST_MASK | DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL4DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL4IOCR @ 0XFD081530

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL4IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL4IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL4IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL4IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL4IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD081530, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL4IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL4IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL4IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL4IOCR_DXIOM_MASK | DDR_PHY_DX8SL4IOCR_DXTXM_MASK | DDR_PHY_DX8SL4IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL4IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL4IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL4IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL4IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SLbDQSCTL @ 0XFD0817DC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SLBDQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SLBDQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SLBDQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SLBDQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SLBDQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SLBDQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SLBDQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SLBDQSCTL_DXSR                                                   0x3
+
+		DQS# Resistor
+		PSU_DDR_PHY_DX8SLBDQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SLBDQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-8 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0817DC, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SLBDQSCTL_RRRMODE_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SLBDQSCTL_WRRMODE_MASK | DDR_PHY_DX8SLBDQSCTL_DQSGX_MASK | DDR_PHY_DX8SLBDQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SLBDQSCTL_LPIOPD_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SLBDQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SLBDQSCTL_UDQIOM_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SLBDQSCTL_DXSR_MASK | DDR_PHY_DX8SLBDQSCTL_DQSNRES_MASK | DDR_PHY_DX8SLBDQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SLBDQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SLBDQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SLBDQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SLBDQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : PIR @ 0XFD080004

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PIR_RESERVED_31                                                     0x0
+
+		Impedance Calibration Bypass
+		PSU_DDR_PHY_PIR_ZCALBYP                                                         0x0
+
+		Digital Delay Line (DDL) Calibration Pause
+		PSU_DDR_PHY_PIR_DCALPSE                                                         0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PIR_RESERVED_28_21                                                  0x0
+
+		Write DQS2DQ Training
+		PSU_DDR_PHY_PIR_DQS2DQ                                                          0x0
+
+		RDIMM Initialization
+		PSU_DDR_PHY_PIR_RDIMMINIT                                                       0x0
+
+		Controller DRAM Initialization
+		PSU_DDR_PHY_PIR_CTLDINIT                                                        0x1
+
+		VREF Training
+		PSU_DDR_PHY_PIR_VREF                                                            0x0
+
+		Static Read Training
+		PSU_DDR_PHY_PIR_SRD                                                             0x0
+
+		Write Data Eye Training
+		PSU_DDR_PHY_PIR_WREYE                                                           0x0
+
+		Read Data Eye Training
+		PSU_DDR_PHY_PIR_RDEYE                                                           0x0
+
+		Write Data Bit Deskew
+		PSU_DDR_PHY_PIR_WRDSKW                                                          0x0
+
+		Read Data Bit Deskew
+		PSU_DDR_PHY_PIR_RDDSKW                                                          0x0
+
+		Write Leveling Adjust
+		PSU_DDR_PHY_PIR_WLADJ                                                           0x0
+
+		Read DQS Gate Training
+		PSU_DDR_PHY_PIR_QSGATE                                                          0x0
+
+		Write Leveling
+		PSU_DDR_PHY_PIR_WL                                                              0x0
+
+		DRAM Initialization
+		PSU_DDR_PHY_PIR_DRAMINIT                                                        0x0
+
+		DRAM Reset (DDR3/DDR4/LPDDR4 Only)
+		PSU_DDR_PHY_PIR_DRAMRST                                                         0x0
+
+		PHY Reset
+		PSU_DDR_PHY_PIR_PHYRST                                                          0x1
+
+		Digital Delay Line (DDL) Calibration
+		PSU_DDR_PHY_PIR_DCAL                                                            0x1
+
+		PLL Initialiazation
+		PSU_DDR_PHY_PIR_PLLINIT                                                         0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PIR_RESERVED_3                                                      0x0
+
+		CA Training
+		PSU_DDR_PHY_PIR_CA                                                              0x0
+
+		Impedance Calibration
+		PSU_DDR_PHY_PIR_ZCAL                                                            0x1
+
+		Initialization Trigger
+		PSU_DDR_PHY_PIR_INIT                                                            0x1
+
+		PHY Initialization Register
+		(OFFSET, MASK, VALUE)      (0XFD080004, 0xFFFFFFFFU ,0x00040073U)  
+		RegMask = (DDR_PHY_PIR_RESERVED_31_MASK | DDR_PHY_PIR_ZCALBYP_MASK | DDR_PHY_PIR_DCALPSE_MASK | DDR_PHY_PIR_RESERVED_28_21_MASK | DDR_PHY_PIR_DQS2DQ_MASK | DDR_PHY_PIR_RDIMMINIT_MASK | DDR_PHY_PIR_CTLDINIT_MASK | DDR_PHY_PIR_VREF_MASK | DDR_PHY_PIR_SRD_MASK | DDR_PHY_PIR_WREYE_MASK | DDR_PHY_PIR_RDEYE_MASK | DDR_PHY_PIR_WRDSKW_MASK | DDR_PHY_PIR_RDDSKW_MASK | DDR_PHY_PIR_WLADJ_MASK | DDR_PHY_PIR_QSGATE_MASK | DDR_PHY_PIR_WL_MASK | DDR_PHY_PIR_DRAMINIT_MASK | DDR_PHY_PIR_DRAMRST_MASK | DDR_PHY_PIR_PHYRST_MASK | DDR_PHY_PIR_DCAL_MASK | DDR_PHY_PIR_PLLINIT_MASK | DDR_PHY_PIR_RESERVED_3_MASK | DDR_PHY_PIR_CA_MASK | DDR_PHY_PIR_ZCAL_MASK | DDR_PHY_PIR_INIT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_PIR_RESERVED_31_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_ZCALBYP_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DCALPSE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RESERVED_28_21_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DQS2DQ_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RDIMMINIT_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_CTLDINIT_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_VREF_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_SRD_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WREYE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RDEYE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WRDSKW_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RDDSKW_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WLADJ_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_QSGATE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WL_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DRAMINIT_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DRAMRST_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_PHYRST_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_DCAL_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_PLLINIT_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RESERVED_3_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_CA_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_ZCAL_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_INIT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PIR_OFFSET ,0xFFFFFFFFU ,0x00040073U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_mio_init_data() {
+		// : MIO PROGRAMMING
+		/*Register : MIO_PIN_0 @ 0XFF180000

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out- (QSPI Clock)
+		PSU_IOU_SLCR_MIO_PIN_0_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_0_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[0]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[0]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_0_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[0]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[0]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)
+		PSU_IOU_SLCR_MIO_PIN_0_L3_SEL                                                   0
+
+		Configures MIO Pin 0 peripheral interface mapping. S
+		(OFFSET, MASK, VALUE)      (0XFF180000, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_0_L0_SEL_MASK | IOU_SLCR_MIO_PIN_0_L1_SEL_MASK | IOU_SLCR_MIO_PIN_0_L2_SEL_MASK | IOU_SLCR_MIO_PIN_0_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_0_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_1 @ 0XFF180004

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_mi1- (QSPI Databus) 1= qspi, Output, qspi_so_mo1- (QSPI Data
+		us)
+		PSU_IOU_SLCR_MIO_PIN_1_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_1_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[1]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[1]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_1_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[1]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[1]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)
+		PSU_IOU_SLCR_MIO_PIN_1_L3_SEL                                                   0
+
+		Configures MIO Pin 1 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180004, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_1_L0_SEL_MASK | IOU_SLCR_MIO_PIN_1_L1_SEL_MASK | IOU_SLCR_MIO_PIN_1_L2_SEL_MASK | IOU_SLCR_MIO_PIN_1_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_1_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_2 @ 0XFF180008

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi2- (QSPI Databus) 1= qspi, Output, qspi_mo2- (QSPI Databus)
+		PSU_IOU_SLCR_MIO_PIN_2_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_2_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[2]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[2]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_2_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[2]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[2]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc2, Input, ttc2_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_2_L3_SEL                                                   0
+
+		Configures MIO Pin 2 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180008, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_2_L0_SEL_MASK | IOU_SLCR_MIO_PIN_2_L1_SEL_MASK | IOU_SLCR_MIO_PIN_2_L2_SEL_MASK | IOU_SLCR_MIO_PIN_2_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_2_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_3 @ 0XFF18000C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi3- (QSPI Databus) 1= qspi, Output, qspi_mo3- (QSPI Databus)
+		PSU_IOU_SLCR_MIO_PIN_3_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_3_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[3]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[3]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_3_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[3]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[3]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_3_L3_SEL                                                   0
+
+		Configures MIO Pin 3 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18000C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_3_L0_SEL_MASK | IOU_SLCR_MIO_PIN_3_L1_SEL_MASK | IOU_SLCR_MIO_PIN_3_L2_SEL_MASK | IOU_SLCR_MIO_PIN_3_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_3_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_4 @ 0XFF180010

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_mo_mo0- (QSPI Databus) 1= qspi, Input, qspi_si_mi0- (QSPI Data
+		us)
+		PSU_IOU_SLCR_MIO_PIN_4_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_4_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[4]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[4]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_4_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[4]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[4]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_4_L3_SEL                                                   0
+
+		Configures MIO Pin 4 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180010, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_4_L0_SEL_MASK | IOU_SLCR_MIO_PIN_4_L1_SEL_MASK | IOU_SLCR_MIO_PIN_4_L2_SEL_MASK | IOU_SLCR_MIO_PIN_4_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_4_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_5 @ 0XFF180014

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out- (QSPI Slave Select)
+		PSU_IOU_SLCR_MIO_PIN_5_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_5_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[5]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[5]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_5_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[5]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[5]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_5_L3_SEL                                                   0
+
+		Configures MIO Pin 5 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180014, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_5_L0_SEL_MASK | IOU_SLCR_MIO_PIN_5_L1_SEL_MASK | IOU_SLCR_MIO_PIN_5_L2_SEL_MASK | IOU_SLCR_MIO_PIN_5_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_5_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_6 @ 0XFF180018

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_clk_for_lpbk- (QSPI Clock to be fed-back)
+		PSU_IOU_SLCR_MIO_PIN_6_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_6_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[6]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[6]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_6_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[6]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[6]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1
+		sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace,
+		Output, tracedq[4]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_6_L3_SEL                                                   0
+
+		Configures MIO Pin 6 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180018, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_6_L0_SEL_MASK | IOU_SLCR_MIO_PIN_6_L1_SEL_MASK | IOU_SLCR_MIO_PIN_6_L2_SEL_MASK | IOU_SLCR_MIO_PIN_6_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_6_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_7 @ 0XFF18001C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out_upper- (QSPI Slave Select upper)
+		PSU_IOU_SLCR_MIO_PIN_7_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_7_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[7]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[7]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_7_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[7]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[7]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= 
+		tc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, 
+		racedq[5]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_7_L3_SEL                                                   0
+
+		Configures MIO Pin 7 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18001C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_7_L0_SEL_MASK | IOU_SLCR_MIO_PIN_7_L1_SEL_MASK | IOU_SLCR_MIO_PIN_7_L2_SEL_MASK | IOU_SLCR_MIO_PIN_7_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_7_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_8 @ 0XFF180020

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[0]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[0]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_8_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_8_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[8]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[8]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_8_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[8]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[8]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc
+		, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Tr
+		ce Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_8_L3_SEL                                                   0
+
+		Configures MIO Pin 8 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180020, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_8_L0_SEL_MASK | IOU_SLCR_MIO_PIN_8_L1_SEL_MASK | IOU_SLCR_MIO_PIN_8_L2_SEL_MASK | IOU_SLCR_MIO_PIN_8_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_8_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_9 @ 0XFF180024

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[1]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[1]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_9_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
+		PSU_IOU_SLCR_MIO_PIN_9_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[9]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[9]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_9_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[9]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[9]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, 
+		utput, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (U
+		RT receiver serial input) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_9_L3_SEL                                                   0
+
+		Configures MIO Pin 9 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180024, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_9_L0_SEL_MASK | IOU_SLCR_MIO_PIN_9_L1_SEL_MASK | IOU_SLCR_MIO_PIN_9_L2_SEL_MASK | IOU_SLCR_MIO_PIN_9_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_9_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_10 @ 0XFF180028

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[2]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[2]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_10_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_10_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[10]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[10]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_10_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[10]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[10]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_10_L3_SEL                                                  0
+
+		Configures MIO Pin 10 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180028, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_10_L0_SEL_MASK | IOU_SLCR_MIO_PIN_10_L1_SEL_MASK | IOU_SLCR_MIO_PIN_10_L2_SEL_MASK | IOU_SLCR_MIO_PIN_10_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_10_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_11 @ 0XFF18002C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[3]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[3]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_11_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_11_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[11]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[11]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_11_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[11]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[11]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_11_L3_SEL                                                  0
+
+		Configures MIO Pin 11 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18002C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_11_L0_SEL_MASK | IOU_SLCR_MIO_PIN_11_L1_SEL_MASK | IOU_SLCR_MIO_PIN_11_L2_SEL_MASK | IOU_SLCR_MIO_PIN_11_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_11_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_12 @ 0XFF180030

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out_upper- (QSPI Upper Clock)
+		PSU_IOU_SLCR_MIO_PIN_12_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		
+		PSU_IOU_SLCR_MIO_PIN_12_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[12]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[12]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_12_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[12]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[12]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cl
+		ck) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trac
+		dq[10]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_12_L3_SEL                                                  0
+
+		Configures MIO Pin 12 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180030, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_12_L0_SEL_MASK | IOU_SLCR_MIO_PIN_12_L1_SEL_MASK | IOU_SLCR_MIO_PIN_12_L2_SEL_MASK | IOU_SLCR_MIO_PIN_12_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_12_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_13 @ 0XFF180034

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_13_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[0]- (NAND chip enable)
+		PSU_IOU_SLCR_MIO_PIN_13_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[13]- (Test Scan Port) = test_scan, Output, test_scan_out[13]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_13_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[13]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[13]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave
+		out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, tracedq[11]- (Trace Port Dat
+		bus)
+		PSU_IOU_SLCR_MIO_PIN_13_L3_SEL                                                  0
+
+		Configures MIO Pin 13 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180034, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_13_L0_SEL_MASK | IOU_SLCR_MIO_PIN_13_L1_SEL_MASK | IOU_SLCR_MIO_PIN_13_L2_SEL_MASK | IOU_SLCR_MIO_PIN_13_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_13_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_14 @ 0XFF180038

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_14_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_cle- (NAND Command Latch Enable)
+		PSU_IOU_SLCR_MIO_PIN_14_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[14]- (Test Scan Port) = test_scan, Output, test_scan_out[14]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_14_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[14]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[14]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_
+		n- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_14_L3_SEL                                                  2
+
+		Configures MIO Pin 14 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180038, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_14_L0_SEL_MASK | IOU_SLCR_MIO_PIN_14_L1_SEL_MASK | IOU_SLCR_MIO_PIN_14_L2_SEL_MASK | IOU_SLCR_MIO_PIN_14_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_14_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_15 @ 0XFF18003C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_15_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ale- (NAND Address Latch Enable)
+		PSU_IOU_SLCR_MIO_PIN_15_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[15]- (Test Scan Port) = test_scan, Output, test_scan_out[15]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_15_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[15]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[15]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out
+		0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter seri
+		l output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_15_L3_SEL                                                  2
+
+		Configures MIO Pin 15 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18003C, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_15_L0_SEL_MASK | IOU_SLCR_MIO_PIN_15_L1_SEL_MASK | IOU_SLCR_MIO_PIN_15_L2_SEL_MASK | IOU_SLCR_MIO_PIN_15_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_15_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_16 @ 0XFF180040

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_16_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[0]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[0]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_16_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[16]- (Test Scan Port) = test_scan, Output, test_scan_out[16]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_16_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[16]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[16]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_16_L3_SEL                                                  2
+
+		Configures MIO Pin 16 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180040, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_16_L0_SEL_MASK | IOU_SLCR_MIO_PIN_16_L1_SEL_MASK | IOU_SLCR_MIO_PIN_16_L2_SEL_MASK | IOU_SLCR_MIO_PIN_16_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_16_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_17 @ 0XFF180044

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_17_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[1]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[1]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_17_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[17]- (Test Scan Port) = test_scan, Output, test_scan_out[17]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_17_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[17]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[17]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_17_L3_SEL                                                  2
+
+		Configures MIO Pin 17 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180044, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_17_L0_SEL_MASK | IOU_SLCR_MIO_PIN_17_L1_SEL_MASK | IOU_SLCR_MIO_PIN_17_L2_SEL_MASK | IOU_SLCR_MIO_PIN_17_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_17_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_18 @ 0XFF180048

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_18_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[2]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[2]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_18_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[18]- (Test Scan Port) = test_scan, Output, test_scan_out[18]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_18_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[18]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[18]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_18_L3_SEL                                                  6
+
+		Configures MIO Pin 18 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180048, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_18_L0_SEL_MASK | IOU_SLCR_MIO_PIN_18_L1_SEL_MASK | IOU_SLCR_MIO_PIN_18_L2_SEL_MASK | IOU_SLCR_MIO_PIN_18_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_18_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_19 @ 0XFF18004C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_19_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[3]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[3]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_19_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[19]- (Test Scan Port) = test_scan, Output, test_scan_out[19]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_19_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[19]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[19]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_19_L3_SEL                                                  6
+
+		Configures MIO Pin 19 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18004C, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_19_L0_SEL_MASK | IOU_SLCR_MIO_PIN_19_L1_SEL_MASK | IOU_SLCR_MIO_PIN_19_L2_SEL_MASK | IOU_SLCR_MIO_PIN_19_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_19_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_20 @ 0XFF180050

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_20_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[4]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[4]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_20_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[20]- (Test Scan Port) = test_scan, Output, test_scan_out[20]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_20_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[20]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[20]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= t
+		c1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_20_L3_SEL                                                  6
+
+		Configures MIO Pin 20 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180050, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_20_L0_SEL_MASK | IOU_SLCR_MIO_PIN_20_L1_SEL_MASK | IOU_SLCR_MIO_PIN_20_L2_SEL_MASK | IOU_SLCR_MIO_PIN_20_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_20_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_21 @ 0XFF180054

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_21_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[5]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[5]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_21_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= test_scan, Input, test_scan_in[21]- (Test Scan Port) = test_scan, Output, test_scan_out[21]- (Test Scan Port) 
+		= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_21_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[21]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[21]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- 
+		UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_21_L3_SEL                                                  6
+
+		Configures MIO Pin 21 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180054, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_21_L0_SEL_MASK | IOU_SLCR_MIO_PIN_21_L1_SEL_MASK | IOU_SLCR_MIO_PIN_21_L2_SEL_MASK | IOU_SLCR_MIO_PIN_21_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_21_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_22 @ 0XFF180058

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_22_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_we_b- (NAND Write Enable)
+		PSU_IOU_SLCR_MIO_PIN_22_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= test_scan, Input, test_scan_in[22]-
+		(Test Scan Port) = test_scan, Output, test_scan_out[22]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_22_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[22]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[22]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed
+		PSU_IOU_SLCR_MIO_PIN_22_L3_SEL                                                  0
+
+		Configures MIO Pin 22 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180058, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_22_L0_SEL_MASK | IOU_SLCR_MIO_PIN_22_L1_SEL_MASK | IOU_SLCR_MIO_PIN_22_L2_SEL_MASK | IOU_SLCR_MIO_PIN_22_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_22_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_23 @ 0XFF18005C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_23_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[6]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[6]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_23_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= test_scan, Input, test_scan_in
+		23]- (Test Scan Port) = test_scan, Output, test_scan_out[23]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper
+		
+		PSU_IOU_SLCR_MIO_PIN_23_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[23]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[23]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_23_L3_SEL                                                  0
+
+		Configures MIO Pin 23 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18005C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_23_L0_SEL_MASK | IOU_SLCR_MIO_PIN_23_L1_SEL_MASK | IOU_SLCR_MIO_PIN_23_L2_SEL_MASK | IOU_SLCR_MIO_PIN_23_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_23_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_24 @ 0XFF180060

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_24_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[7]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[7]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_24_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= test_scan, Input, test
+		scan_in[24]- (Test Scan Port) = test_scan, Output, test_scan_out[24]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ex
+		 Tamper)
+		PSU_IOU_SLCR_MIO_PIN_24_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[24]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[24]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= Not Used 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1,
+		Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_24_L3_SEL                                                  1
+
+		Configures MIO Pin 24 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180060, 0x000000FEU ,0x00000020U)  
+		RegMask = (IOU_SLCR_MIO_PIN_24_L0_SEL_MASK | IOU_SLCR_MIO_PIN_24_L1_SEL_MASK | IOU_SLCR_MIO_PIN_24_L2_SEL_MASK | IOU_SLCR_MIO_PIN_24_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_24_OFFSET ,0x000000FEU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_25 @ 0XFF180064

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_25_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_re_n- (NAND Read Enable)
+		PSU_IOU_SLCR_MIO_PIN_25_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= test_scan, Input,
+		test_scan_in[25]- (Test Scan Port) = test_scan, Output, test_scan_out[25]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (C
+		U Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_25_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[25]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[25]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= Not Used 5= ttc3, Output, ttc3_wave_out- (TTC Waveform 
+		lock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_25_L3_SEL                                                  1
+
+		Configures MIO Pin 25 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180064, 0x000000FEU ,0x00000020U)  
+		RegMask = (IOU_SLCR_MIO_PIN_25_L0_SEL_MASK | IOU_SLCR_MIO_PIN_25_L1_SEL_MASK | IOU_SLCR_MIO_PIN_25_L2_SEL_MASK | IOU_SLCR_MIO_PIN_25_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_25_OFFSET ,0x000000FEU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_26 @ 0XFF180068

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_26_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
+		PSU_IOU_SLCR_MIO_PIN_26_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_26_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_26_L3_SEL                                                  0
+
+		Configures MIO Pin 26 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180068, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_26_L0_SEL_MASK | IOU_SLCR_MIO_PIN_26_L1_SEL_MASK | IOU_SLCR_MIO_PIN_26_L2_SEL_MASK | IOU_SLCR_MIO_PIN_26_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_26_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_27 @ 0XFF18006C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_27_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_27_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_27_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)
+		PSU_IOU_SLCR_MIO_PIN_27_L3_SEL                                                  0
+
+		Configures MIO Pin 27 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18006C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_27_L0_SEL_MASK | IOU_SLCR_MIO_PIN_27_L1_SEL_MASK | IOU_SLCR_MIO_PIN_27_L2_SEL_MASK | IOU_SLCR_MIO_PIN_27_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_27_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_28 @ 0XFF180070

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_28_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_28_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_28_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_28_L3_SEL                                                  0
+
+		Configures MIO Pin 28 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180070, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_28_L0_SEL_MASK | IOU_SLCR_MIO_PIN_28_L1_SEL_MASK | IOU_SLCR_MIO_PIN_28_L2_SEL_MASK | IOU_SLCR_MIO_PIN_28_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_28_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_29 @ 0XFF180074

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_29_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_29_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_29_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_29_L3_SEL                                                  0
+
+		Configures MIO Pin 29 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180074, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_29_L0_SEL_MASK | IOU_SLCR_MIO_PIN_29_L1_SEL_MASK | IOU_SLCR_MIO_PIN_29_L2_SEL_MASK | IOU_SLCR_MIO_PIN_29_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_29_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_30 @ 0XFF180078

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_30_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_30_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_30_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_so
+		 (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output
+		 tracedq[8]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_30_L3_SEL                                                  0
+
+		Configures MIO Pin 30 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180078, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_30_L0_SEL_MASK | IOU_SLCR_MIO_PIN_30_L1_SEL_MASK | IOU_SLCR_MIO_PIN_30_L2_SEL_MASK | IOU_SLCR_MIO_PIN_30_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_30_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_31 @ 0XFF18007C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_31_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_31_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[31]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[31]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_31_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[5]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[5]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi
+		_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial out
+		ut) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_31_L3_SEL                                                  0
+
+		Configures MIO Pin 31 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18007C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_31_L0_SEL_MASK | IOU_SLCR_MIO_PIN_31_L1_SEL_MASK | IOU_SLCR_MIO_PIN_31_L2_SEL_MASK | IOU_SLCR_MIO_PIN_31_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_31_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_32 @ 0XFF180080

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_32_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		
+		PSU_IOU_SLCR_MIO_PIN_32_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[32]- (Test S
+		an Port) = test_scan, Output, test_scan_out[32]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_32_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[6]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[6]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi
+		_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= 
+		race, Output, tracedq[10]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_32_L3_SEL                                                  0
+
+		Configures MIO Pin 32 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180080, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_32_L0_SEL_MASK | IOU_SLCR_MIO_PIN_32_L1_SEL_MASK | IOU_SLCR_MIO_PIN_32_L2_SEL_MASK | IOU_SLCR_MIO_PIN_32_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_32_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_33 @ 0XFF180084

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_33_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_33_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[33]- (Test S
+		an Port) = test_scan, Output, test_scan_out[33]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_33_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[7]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[7]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= t
+		c3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, traced
+		[11]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_33_L3_SEL                                                  0
+
+		Configures MIO Pin 33 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180084, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_33_L0_SEL_MASK | IOU_SLCR_MIO_PIN_33_L1_SEL_MASK | IOU_SLCR_MIO_PIN_33_L2_SEL_MASK | IOU_SLCR_MIO_PIN_33_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_33_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_34 @ 0XFF180088

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_34_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_34_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[34]- (Test S
+		an Port) = test_scan, Output, test_scan_out[34]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_34_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[8]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[8]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc2
+		 Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace P
+		rt Databus)
+		PSU_IOU_SLCR_MIO_PIN_34_L3_SEL                                                  0
+
+		Configures MIO Pin 34 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180088, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_34_L0_SEL_MASK | IOU_SLCR_MIO_PIN_34_L1_SEL_MASK | IOU_SLCR_MIO_PIN_34_L2_SEL_MASK | IOU_SLCR_MIO_PIN_34_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_34_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_35 @ 0XFF18008C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_35_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_35_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[35]- (Test S
+		an Port) = test_scan, Output, test_scan_out[35]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_35_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[9]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[9]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1,
+		Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- 
+		UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_35_L3_SEL                                                  0
+
+		Configures MIO Pin 35 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18008C, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_35_L0_SEL_MASK | IOU_SLCR_MIO_PIN_35_L1_SEL_MASK | IOU_SLCR_MIO_PIN_35_L2_SEL_MASK | IOU_SLCR_MIO_PIN_35_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_35_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_36 @ 0XFF180090

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_36_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_36_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[36]- (Test S
+		an Port) = test_scan, Output, test_scan_out[36]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_36_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[10]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[10]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_36_L3_SEL                                                  0
+
+		Configures MIO Pin 36 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180090, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_36_L0_SEL_MASK | IOU_SLCR_MIO_PIN_36_L1_SEL_MASK | IOU_SLCR_MIO_PIN_36_L2_SEL_MASK | IOU_SLCR_MIO_PIN_36_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_36_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_37 @ 0XFF180094

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_37_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_37_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[37]- (Test S
+		an Port) = test_scan, Output, test_scan_out[37]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_37_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[11]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[11]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_37_L3_SEL                                                  0
+
+		Configures MIO Pin 37 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180094, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_37_L0_SEL_MASK | IOU_SLCR_MIO_PIN_37_L1_SEL_MASK | IOU_SLCR_MIO_PIN_37_L2_SEL_MASK | IOU_SLCR_MIO_PIN_37_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_37_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_38 @ 0XFF180098

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_38_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_38_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_38_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[12]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[12]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clo
+		k) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, trace_clk-
+		(Trace Port Clock)
+		PSU_IOU_SLCR_MIO_PIN_38_L3_SEL                                                  0
+
+		Configures MIO Pin 38 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180098, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_38_L0_SEL_MASK | IOU_SLCR_MIO_PIN_38_L1_SEL_MASK | IOU_SLCR_MIO_PIN_38_L2_SEL_MASK | IOU_SLCR_MIO_PIN_38_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_38_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_39 @ 0XFF18009C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_39_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_39_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= sd1, Input, sd1_data_i
+		[4]- (8-bit Data bus) = sd1, Output, sdio1_data_out[4]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_39_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[13]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[13]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc0, Output, ttc0_wav
+		_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, trace_ctl- (Trace Port
+		Control Signal)
+		PSU_IOU_SLCR_MIO_PIN_39_L3_SEL                                                  0
+
+		Configures MIO Pin 39 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18009C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_39_L0_SEL_MASK | IOU_SLCR_MIO_PIN_39_L1_SEL_MASK | IOU_SLCR_MIO_PIN_39_L2_SEL_MASK | IOU_SLCR_MIO_PIN_39_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_39_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_40 @ 0XFF1800A0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_40_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_40_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= sd1, Input, sd1_data_in[5]- (8-bit Data bus) = sd1, Output, sdio1_data_out[5]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_40_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[14]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[14]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc3, Input, ttc3_clk
+		in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_40_L3_SEL                                                  0
+
+		Configures MIO Pin 40 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800A0, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_40_L0_SEL_MASK | IOU_SLCR_MIO_PIN_40_L1_SEL_MASK | IOU_SLCR_MIO_PIN_40_L2_SEL_MASK | IOU_SLCR_MIO_PIN_40_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_40_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_41 @ 0XFF1800A4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_41_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_41_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[6]- (8-bit Data bus) = sd1, Output, sdio1_data_out[6]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_41_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[15]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[15]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[
+		]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial in
+		ut) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_41_L3_SEL                                                  0
+
+		Configures MIO Pin 41 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800A4, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_41_L0_SEL_MASK | IOU_SLCR_MIO_PIN_41_L1_SEL_MASK | IOU_SLCR_MIO_PIN_41_L2_SEL_MASK | IOU_SLCR_MIO_PIN_41_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_41_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_42 @ 0XFF1800A8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_42_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_42_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[7]- (8-bit Data bus) = sd1, Output, sdio1_data_out[7]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_42_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[16]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[16]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[2]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_42_L3_SEL                                                  0
+
+		Configures MIO Pin 42 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800A8, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_42_L0_SEL_MASK | IOU_SLCR_MIO_PIN_42_L1_SEL_MASK | IOU_SLCR_MIO_PIN_42_L2_SEL_MASK | IOU_SLCR_MIO_PIN_42_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_42_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_43 @ 0XFF1800AC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_43_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_43_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_43_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[17]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[17]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, s
+		i0_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[3]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_43_L3_SEL                                                  0
+
+		Configures MIO Pin 43 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800AC, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_43_L0_SEL_MASK | IOU_SLCR_MIO_PIN_43_L1_SEL_MASK | IOU_SLCR_MIO_PIN_43_L2_SEL_MASK | IOU_SLCR_MIO_PIN_43_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_43_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_44 @ 0XFF1800B0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_44_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_44_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_44_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[18]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[18]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, s
+		i1_sclk_out- (SPI Clock) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 Not Used
+		PSU_IOU_SLCR_MIO_PIN_44_L3_SEL                                                  0
+
+		Configures MIO Pin 44 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800B0, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_44_L0_SEL_MASK | IOU_SLCR_MIO_PIN_44_L1_SEL_MASK | IOU_SLCR_MIO_PIN_44_L2_SEL_MASK | IOU_SLCR_MIO_PIN_44_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_44_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_45 @ 0XFF1800B4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_45_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_45_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_45_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[19]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[19]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_45_L3_SEL                                                  0
+
+		Configures MIO Pin 45 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800B4, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_45_L0_SEL_MASK | IOU_SLCR_MIO_PIN_45_L1_SEL_MASK | IOU_SLCR_MIO_PIN_45_L2_SEL_MASK | IOU_SLCR_MIO_PIN_45_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_45_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_46 @ 0XFF1800B8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_46_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_46_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_46_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[20]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[20]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= tt
+		0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_46_L3_SEL                                                  0
+
+		Configures MIO Pin 46 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800B8, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_46_L0_SEL_MASK | IOU_SLCR_MIO_PIN_46_L1_SEL_MASK | IOU_SLCR_MIO_PIN_46_L2_SEL_MASK | IOU_SLCR_MIO_PIN_46_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_46_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_47 @ 0XFF1800BC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_47_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_47_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_47_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[21]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[21]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_47_L3_SEL                                                  0
+
+		Configures MIO Pin 47 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800BC, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_47_L0_SEL_MASK | IOU_SLCR_MIO_PIN_47_L1_SEL_MASK | IOU_SLCR_MIO_PIN_47_L2_SEL_MASK | IOU_SLCR_MIO_PIN_47_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_47_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_48 @ 0XFF1800C0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_48_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_48_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_48_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[22]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[22]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not U
+		ed
+		PSU_IOU_SLCR_MIO_PIN_48_L3_SEL                                                  0
+
+		Configures MIO Pin 48 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800C0, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_48_L0_SEL_MASK | IOU_SLCR_MIO_PIN_48_L1_SEL_MASK | IOU_SLCR_MIO_PIN_48_L2_SEL_MASK | IOU_SLCR_MIO_PIN_48_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_48_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_49 @ 0XFF1800C4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_49_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_49_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_data_in[3]- (8
+		bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_49_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[23]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[23]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_49_L3_SEL                                                  0
+
+		Configures MIO Pin 49 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800C4, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_49_L0_SEL_MASK | IOU_SLCR_MIO_PIN_49_L1_SEL_MASK | IOU_SLCR_MIO_PIN_49_L2_SEL_MASK | IOU_SLCR_MIO_PIN_49_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_49_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_50 @ 0XFF1800C8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
+		PSU_IOU_SLCR_MIO_PIN_50_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_50_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Input, sd1_c
+		d_in- (Command Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_50_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[24]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[24]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= ttc2, Input, ttc2
+		clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_50_L3_SEL                                                  0
+
+		Configures MIO Pin 50 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800C8, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_50_L0_SEL_MASK | IOU_SLCR_MIO_PIN_50_L1_SEL_MASK | IOU_SLCR_MIO_PIN_50_L2_SEL_MASK | IOU_SLCR_MIO_PIN_50_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_50_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_51 @ 0XFF1800CC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
+		PSU_IOU_SLCR_MIO_PIN_51_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_51_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Output, sdio1_clk_out- (SDSDIO clock) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_51_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[25]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[25]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= mdio1, Input, gem1_mdio_in- (MDIO Data) 4= mdio1, Outp
+		t, gem1_mdio_out- (MDIO Data) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter
+		serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_51_L3_SEL                                                  0
+
+		Configures MIO Pin 51 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800CC, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_51_L0_SEL_MASK | IOU_SLCR_MIO_PIN_51_L1_SEL_MASK | IOU_SLCR_MIO_PIN_51_L2_SEL_MASK | IOU_SLCR_MIO_PIN_51_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_51_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_52 @ 0XFF1800D0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_52_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_clk_in- (ULPI Clock)
+		PSU_IOU_SLCR_MIO_PIN_52_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_52_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[0]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[0]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)
+		PSU_IOU_SLCR_MIO_PIN_52_L3_SEL                                                  0
+
+		Configures MIO Pin 52 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800D0, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_52_L0_SEL_MASK | IOU_SLCR_MIO_PIN_52_L1_SEL_MASK | IOU_SLCR_MIO_PIN_52_L2_SEL_MASK | IOU_SLCR_MIO_PIN_52_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_52_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_53 @ 0XFF1800D4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_53_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_dir- (Data bus direction control)
+		PSU_IOU_SLCR_MIO_PIN_53_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_53_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[1]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[1]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)
+		PSU_IOU_SLCR_MIO_PIN_53_L3_SEL                                                  0
+
+		Configures MIO Pin 53 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800D4, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_53_L0_SEL_MASK | IOU_SLCR_MIO_PIN_53_L1_SEL_MASK | IOU_SLCR_MIO_PIN_53_L2_SEL_MASK | IOU_SLCR_MIO_PIN_53_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_53_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_54 @ 0XFF1800D8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_54_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[2]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[2]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_54_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_54_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[2]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[2]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_54_L3_SEL                                                  0
+
+		Configures MIO Pin 54 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800D8, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_54_L0_SEL_MASK | IOU_SLCR_MIO_PIN_54_L1_SEL_MASK | IOU_SLCR_MIO_PIN_54_L2_SEL_MASK | IOU_SLCR_MIO_PIN_54_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_54_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_55 @ 0XFF1800DC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_55_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_nxt- (Data flow control signal from the PHY)
+		PSU_IOU_SLCR_MIO_PIN_55_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_55_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[3]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[3]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_55_L3_SEL                                                  0
+
+		Configures MIO Pin 55 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800DC, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_55_L0_SEL_MASK | IOU_SLCR_MIO_PIN_55_L1_SEL_MASK | IOU_SLCR_MIO_PIN_55_L2_SEL_MASK | IOU_SLCR_MIO_PIN_55_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_55_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_56 @ 0XFF1800E0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_56_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[0]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[0]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_56_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_56_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[4]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[4]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_56_L3_SEL                                                  0
+
+		Configures MIO Pin 56 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800E0, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_56_L0_SEL_MASK | IOU_SLCR_MIO_PIN_56_L1_SEL_MASK | IOU_SLCR_MIO_PIN_56_L2_SEL_MASK | IOU_SLCR_MIO_PIN_56_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_56_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_57 @ 0XFF1800E4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_57_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[1]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[1]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_57_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_57_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[5]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[5]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_57_L3_SEL                                                  0
+
+		Configures MIO Pin 57 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800E4, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_57_L0_SEL_MASK | IOU_SLCR_MIO_PIN_57_L1_SEL_MASK | IOU_SLCR_MIO_PIN_57_L2_SEL_MASK | IOU_SLCR_MIO_PIN_57_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_57_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_58 @ 0XFF1800E8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_58_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Output, usb0_ulpi_stp- (Asserted to end or interrupt transfers)
+		PSU_IOU_SLCR_MIO_PIN_58_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_58_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[6]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[6]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_58_L3_SEL                                                  0
+
+		Configures MIO Pin 58 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800E8, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_58_L0_SEL_MASK | IOU_SLCR_MIO_PIN_58_L1_SEL_MASK | IOU_SLCR_MIO_PIN_58_L2_SEL_MASK | IOU_SLCR_MIO_PIN_58_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_58_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_59 @ 0XFF1800EC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_59_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[3]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[3]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_59_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_59_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[7]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[7]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)
+		PSU_IOU_SLCR_MIO_PIN_59_L3_SEL                                                  0
+
+		Configures MIO Pin 59 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800EC, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_59_L0_SEL_MASK | IOU_SLCR_MIO_PIN_59_L1_SEL_MASK | IOU_SLCR_MIO_PIN_59_L2_SEL_MASK | IOU_SLCR_MIO_PIN_59_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_59_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_60 @ 0XFF1800F0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_60_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[4]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[4]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_60_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_60_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[8]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[8]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_60_L3_SEL                                                  0
+
+		Configures MIO Pin 60 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800F0, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_60_L0_SEL_MASK | IOU_SLCR_MIO_PIN_60_L1_SEL_MASK | IOU_SLCR_MIO_PIN_60_L2_SEL_MASK | IOU_SLCR_MIO_PIN_60_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_60_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_61 @ 0XFF1800F4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_61_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[5]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[5]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_61_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_61_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[9]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[9]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, Output, spi1_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_61_L3_SEL                                                  0
+
+		Configures MIO Pin 61 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800F4, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_61_L0_SEL_MASK | IOU_SLCR_MIO_PIN_61_L1_SEL_MASK | IOU_SLCR_MIO_PIN_61_L2_SEL_MASK | IOU_SLCR_MIO_PIN_61_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_61_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_62 @ 0XFF1800F8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_62_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[6]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[6]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_62_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_62_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[10]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[10]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_62_L3_SEL                                                  0
+
+		Configures MIO Pin 62 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800F8, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_62_L0_SEL_MASK | IOU_SLCR_MIO_PIN_62_L1_SEL_MASK | IOU_SLCR_MIO_PIN_62_L2_SEL_MASK | IOU_SLCR_MIO_PIN_62_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_62_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_63 @ 0XFF1800FC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_63_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[7]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[7]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_63_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_63_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[11]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[11]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_63_L3_SEL                                                  0
+
+		Configures MIO Pin 63 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800FC, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_63_L0_SEL_MASK | IOU_SLCR_MIO_PIN_63_L1_SEL_MASK | IOU_SLCR_MIO_PIN_63_L2_SEL_MASK | IOU_SLCR_MIO_PIN_63_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_63_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_64 @ 0XFF180100

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_64_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_clk_in- (ULPI Clock)
+		PSU_IOU_SLCR_MIO_PIN_64_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_64_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[12]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[12]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, s
+		i0_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 trace, Output, tracedq[10]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_64_L3_SEL                                                  0
+
+		Configures MIO Pin 64 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180100, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_64_L0_SEL_MASK | IOU_SLCR_MIO_PIN_64_L1_SEL_MASK | IOU_SLCR_MIO_PIN_64_L2_SEL_MASK | IOU_SLCR_MIO_PIN_64_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_64_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_65 @ 0XFF180104

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_65_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_dir- (Data bus direction control)
+		PSU_IOU_SLCR_MIO_PIN_65_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_65_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[13]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[13]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trac
+		dq[11]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_65_L3_SEL                                                  0
+
+		Configures MIO Pin 65 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180104, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_65_L0_SEL_MASK | IOU_SLCR_MIO_PIN_65_L1_SEL_MASK | IOU_SLCR_MIO_PIN_65_L2_SEL_MASK | IOU_SLCR_MIO_PIN_65_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_65_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_66 @ 0XFF180108

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_66_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[2]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[2]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_66_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_66_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[14]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[14]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= tt
+		2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace
+		Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_66_L3_SEL                                                  0
+
+		Configures MIO Pin 66 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180108, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_66_L0_SEL_MASK | IOU_SLCR_MIO_PIN_66_L1_SEL_MASK | IOU_SLCR_MIO_PIN_66_L2_SEL_MASK | IOU_SLCR_MIO_PIN_66_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_66_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_67 @ 0XFF18010C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_67_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_nxt- (Data flow control signal from the PHY)
+		PSU_IOU_SLCR_MIO_PIN_67_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_67_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[15]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[15]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi0_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_67_L3_SEL                                                  0
+
+		Configures MIO Pin 67 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18010C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_67_L0_SEL_MASK | IOU_SLCR_MIO_PIN_67_L1_SEL_MASK | IOU_SLCR_MIO_PIN_67_L2_SEL_MASK | IOU_SLCR_MIO_PIN_67_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_67_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_68 @ 0XFF180110

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_68_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[0]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[0]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_68_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_68_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[16]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[16]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_68_L3_SEL                                                  0
+
+		Configures MIO Pin 68 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180110, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_68_L0_SEL_MASK | IOU_SLCR_MIO_PIN_68_L1_SEL_MASK | IOU_SLCR_MIO_PIN_68_L2_SEL_MASK | IOU_SLCR_MIO_PIN_68_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_68_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_69 @ 0XFF180114

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_69_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[1]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[1]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_69_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_69_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[17]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[17]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_69_L3_SEL                                                  0
+
+		Configures MIO Pin 69 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180114, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_69_L0_SEL_MASK | IOU_SLCR_MIO_PIN_69_L1_SEL_MASK | IOU_SLCR_MIO_PIN_69_L2_SEL_MASK | IOU_SLCR_MIO_PIN_69_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_69_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_70 @ 0XFF180118

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_70_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Output, usb1_ulpi_stp- (Asserted to end or interrupt transfers)
+		PSU_IOU_SLCR_MIO_PIN_70_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_70_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[18]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[18]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed
+		PSU_IOU_SLCR_MIO_PIN_70_L3_SEL                                                  0
+
+		Configures MIO Pin 70 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180118, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_70_L0_SEL_MASK | IOU_SLCR_MIO_PIN_70_L1_SEL_MASK | IOU_SLCR_MIO_PIN_70_L2_SEL_MASK | IOU_SLCR_MIO_PIN_70_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_70_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_71 @ 0XFF18011C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_71_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[3]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[3]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_71_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_71_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[19]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[19]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_71_L3_SEL                                                  0
+
+		Configures MIO Pin 71 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18011C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_71_L0_SEL_MASK | IOU_SLCR_MIO_PIN_71_L1_SEL_MASK | IOU_SLCR_MIO_PIN_71_L2_SEL_MASK | IOU_SLCR_MIO_PIN_71_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_71_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_72 @ 0XFF180120

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_72_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[4]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[4]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_72_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_72_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[20]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[20]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= N
+		t Used 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_72_L3_SEL                                                  0
+
+		Configures MIO Pin 72 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180120, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_72_L0_SEL_MASK | IOU_SLCR_MIO_PIN_72_L1_SEL_MASK | IOU_SLCR_MIO_PIN_72_L2_SEL_MASK | IOU_SLCR_MIO_PIN_72_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_72_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_73 @ 0XFF180124

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_73_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[5]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[5]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_73_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_73_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[21]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[21]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= Not Used 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_73_L3_SEL                                                  0
+
+		Configures MIO Pin 73 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180124, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_73_L0_SEL_MASK | IOU_SLCR_MIO_PIN_73_L1_SEL_MASK | IOU_SLCR_MIO_PIN_73_L2_SEL_MASK | IOU_SLCR_MIO_PIN_73_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_73_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_74 @ 0XFF180128

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_74_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[6]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[6]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_74_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[3]- (8-bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_74_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[22]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[22]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= Not Used 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_74_L3_SEL                                                  0
+
+		Configures MIO Pin 74 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180128, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_74_L0_SEL_MASK | IOU_SLCR_MIO_PIN_74_L1_SEL_MASK | IOU_SLCR_MIO_PIN_74_L2_SEL_MASK | IOU_SLCR_MIO_PIN_74_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_74_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_75 @ 0XFF18012C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_75_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[7]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[7]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_75_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_cmd_in- (Comma
+		d Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_75_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[23]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[23]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= Not Used 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_75_L3_SEL                                                  0
+
+		Configures MIO Pin 75 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18012C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_75_L0_SEL_MASK | IOU_SLCR_MIO_PIN_75_L1_SEL_MASK | IOU_SLCR_MIO_PIN_75_L2_SEL_MASK | IOU_SLCR_MIO_PIN_75_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_75_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_76 @ 0XFF180130

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Output, sdio
+		_clk_out- (SDSDIO clock) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[24]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[24]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= mdio0, Output, gem0_mdc- (MDIO Clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= mdio2, Output, gem2_mdc- (MDIO Clock
+		 6= mdio3, Output, gem3_mdc- (MDIO Clock) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L3_SEL                                                  6
+
+		Configures MIO Pin 76 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180130, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_76_L0_SEL_MASK | IOU_SLCR_MIO_PIN_76_L1_SEL_MASK | IOU_SLCR_MIO_PIN_76_L2_SEL_MASK | IOU_SLCR_MIO_PIN_76_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_76_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_77 @ 0XFF180134

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[25]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[25]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= mdio0, Input, gem0_mdio_in- (MDIO Data) 3= mdio0, Output, gem0_mdio_out- (MDIO Data) 4= mdio1, Input, gem1_mdio_in- (MD
+		O Data) 4= mdio1, Output, gem1_mdio_out- (MDIO Data) 5= mdio2, Input, gem2_mdio_in- (MDIO Data) 5= mdio2, Output, gem2_mdio_o
+		t- (MDIO Data) 6= mdio3, Input, gem3_mdio_in- (MDIO Data) 6= mdio3, Output, gem3_mdio_out- (MDIO Data) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L3_SEL                                                  6
+
+		Configures MIO Pin 77 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180134, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_77_L0_SEL_MASK | IOU_SLCR_MIO_PIN_77_L1_SEL_MASK | IOU_SLCR_MIO_PIN_77_L2_SEL_MASK | IOU_SLCR_MIO_PIN_77_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_77_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_MST_TRI0 @ 0XFF180204

+
+		Master Tri-state Enable for pin 0, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI                                            0
+
+		Master Tri-state Enable for pin 1, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI                                            0
+
+		Master Tri-state Enable for pin 2, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI                                            0
+
+		Master Tri-state Enable for pin 3, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI                                            0
+
+		Master Tri-state Enable for pin 4, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI                                            0
+
+		Master Tri-state Enable for pin 5, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI                                            0
+
+		Master Tri-state Enable for pin 6, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI                                            0
+
+		Master Tri-state Enable for pin 7, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI                                            0
+
+		Master Tri-state Enable for pin 8, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI                                            0
+
+		Master Tri-state Enable for pin 9, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI                                            0
+
+		Master Tri-state Enable for pin 10, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI                                            0
+
+		Master Tri-state Enable for pin 11, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI                                            0
+
+		Master Tri-state Enable for pin 12, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI                                            0
+
+		Master Tri-state Enable for pin 13, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI                                            0
+
+		Master Tri-state Enable for pin 14, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI                                            0
+
+		Master Tri-state Enable for pin 15, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI                                            0
+
+		Master Tri-state Enable for pin 16, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI                                            0
+
+		Master Tri-state Enable for pin 17, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI                                            0
+
+		Master Tri-state Enable for pin 18, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI                                            1
+
+		Master Tri-state Enable for pin 19, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI                                            0
+
+		Master Tri-state Enable for pin 20, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI                                            0
+
+		Master Tri-state Enable for pin 21, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI                                            1
+
+		Master Tri-state Enable for pin 22, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI                                            0
+
+		Master Tri-state Enable for pin 23, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI                                            0
+
+		Master Tri-state Enable for pin 24, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI                                            0
+
+		Master Tri-state Enable for pin 25, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI                                            1
+
+		Master Tri-state Enable for pin 26, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI                                            1
+
+		Master Tri-state Enable for pin 27, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI                                            0
+
+		Master Tri-state Enable for pin 28, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI                                            0
+
+		Master Tri-state Enable for pin 29, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI                                            0
+
+		Master Tri-state Enable for pin 30, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI                                            0
+
+		Master Tri-state Enable for pin 31, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI                                            0
+
+		MIO pin Tri-state Enables, 31:0
+		(OFFSET, MASK, VALUE)      (0XFF180204, 0xFFFFFFFFU ,0x06240000U)  
+		RegMask = (IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI0_OFFSET ,0xFFFFFFFFU ,0x06240000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_MST_TRI1 @ 0XFF180208

+
+		Master Tri-state Enable for pin 32, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI                                            0
+
+		Master Tri-state Enable for pin 33, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI                                            0
+
+		Master Tri-state Enable for pin 34, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI                                            0
+
+		Master Tri-state Enable for pin 35, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI                                            0
+
+		Master Tri-state Enable for pin 36, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI                                            0
+
+		Master Tri-state Enable for pin 37, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI                                            0
+
+		Master Tri-state Enable for pin 38, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI                                            0
+
+		Master Tri-state Enable for pin 39, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI                                            0
+
+		Master Tri-state Enable for pin 40, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI                                            0
+
+		Master Tri-state Enable for pin 41, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI                                            0
+
+		Master Tri-state Enable for pin 42, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI                                            0
+
+		Master Tri-state Enable for pin 43, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI                                            0
+
+		Master Tri-state Enable for pin 44, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI                                            1
+
+		Master Tri-state Enable for pin 45, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI                                            1
+
+		Master Tri-state Enable for pin 46, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI                                            0
+
+		Master Tri-state Enable for pin 47, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI                                            0
+
+		Master Tri-state Enable for pin 48, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI                                            0
+
+		Master Tri-state Enable for pin 49, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI                                            0
+
+		Master Tri-state Enable for pin 50, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI                                            0
+
+		Master Tri-state Enable for pin 51, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI                                            0
+
+		Master Tri-state Enable for pin 52, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI                                            1
+
+		Master Tri-state Enable for pin 53, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI                                            1
+
+		Master Tri-state Enable for pin 54, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI                                            0
+
+		Master Tri-state Enable for pin 55, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI                                            1
+
+		Master Tri-state Enable for pin 56, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI                                            0
+
+		Master Tri-state Enable for pin 57, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI                                            0
+
+		Master Tri-state Enable for pin 58, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI                                            0
+
+		Master Tri-state Enable for pin 59, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI                                            0
+
+		Master Tri-state Enable for pin 60, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI                                            0
+
+		Master Tri-state Enable for pin 61, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI                                            0
+
+		Master Tri-state Enable for pin 62, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI                                            0
+
+		Master Tri-state Enable for pin 63, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI                                            0
+
+		MIO pin Tri-state Enables, 63:32
+		(OFFSET, MASK, VALUE)      (0XFF180208, 0xFFFFFFFFU ,0x00B03000U)  
+		RegMask = (IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI1_OFFSET ,0xFFFFFFFFU ,0x00B03000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_MST_TRI2 @ 0XFF18020C

+
+		Master Tri-state Enable for pin 64, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI                                            0
+
+		Master Tri-state Enable for pin 65, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI                                            0
+
+		Master Tri-state Enable for pin 66, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI                                            0
+
+		Master Tri-state Enable for pin 67, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI                                            0
+
+		Master Tri-state Enable for pin 68, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI                                            0
+
+		Master Tri-state Enable for pin 69, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI                                            0
+
+		Master Tri-state Enable for pin 70, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI                                            1
+
+		Master Tri-state Enable for pin 71, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI                                            1
+
+		Master Tri-state Enable for pin 72, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI                                            1
+
+		Master Tri-state Enable for pin 73, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI                                            1
+
+		Master Tri-state Enable for pin 74, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI                                            1
+
+		Master Tri-state Enable for pin 75, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI                                            1
+
+		Master Tri-state Enable for pin 76, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI                                            0
+
+		Master Tri-state Enable for pin 77, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI                                            0
+
+		MIO pin Tri-state Enables, 77:64
+		(OFFSET, MASK, VALUE)      (0XFF18020C, 0x00003FFFU ,0x00000FC0U)  
+		RegMask = (IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI2_OFFSET ,0x00003FFFU ,0x00000FC0U);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl0 @ 0XFF180138

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25                                          1
+
+		Drive0 control to MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180138, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl1 @ 0XFF18013C

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25                                          1
+
+		Drive1 control to MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF18013C, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl3 @ 0XFF180140

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		Selects either Schmitt or CMOS input for MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180140, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl4 @ 0XFF180144

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		When mio_bank0_pull_enable is set, this selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180144, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl5 @ 0XFF180148

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		When set, this enables mio_bank0_pullupdown to selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180148, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl6 @ 0XFF18014C

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		Slew rate control to MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF18014C, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl0 @ 0XFF180154

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25                                          1
+
+		Drive0 control to MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180154, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl1 @ 0XFF180158

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25                                          1
+
+		Drive1 control to MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180158, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl3 @ 0XFF18015C

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		Selects either Schmitt or CMOS input for MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF18015C, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl4 @ 0XFF180160

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		When mio_bank1_pull_enable is set, this selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180160, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl5 @ 0XFF180164

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		When set, this enables mio_bank1_pullupdown to selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180164, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl6 @ 0XFF180168

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		Slew rate control to MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180168, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl0 @ 0XFF180170

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25                                          1
+
+		Drive0 control to MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180170, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl1 @ 0XFF180174

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25                                          1
+
+		Drive1 control to MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180174, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl3 @ 0XFF180178

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		Selects either Schmitt or CMOS input for MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180178, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl4 @ 0XFF18017C

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		When mio_bank2_pull_enable is set, this selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF18017C, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl5 @ 0XFF180180

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		When set, this enables mio_bank2_pullupdown to selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180180, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl6 @ 0XFF180184

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		Slew rate control to MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180184, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : LOOPBACK
+		/*Register : MIO_LOOPBACK @ 0XFF180200

+
+		I2C Loopback Control. 0 = Connect I2C inputs according to MIO mapping. 1 = Loop I2C 0 outputs to I2C 1 inputs, and I2C 1 outp
+		ts to I2C 0 inputs.
+		PSU_IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1                                        0
+
+		CAN Loopback Control. 0 = Connect CAN inputs according to MIO mapping. 1 = Loop CAN 0 Tx to CAN 1 Rx, and CAN 1 Tx to CAN 0 R
+		.
+		PSU_IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1                                        0
+
+		UART Loopback Control. 0 = Connect UART inputs according to MIO mapping. 1 = Loop UART 0 outputs to UART 1 inputs, and UART 1
+		outputs to UART 0 inputs. RXD/TXD cross-connected. RTS/CTS cross-connected. DSR, DTR, DCD and RI not used.
+		PSU_IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1                                          0
+
+		SPI Loopback Control. 0 = Connect SPI inputs according to MIO mapping. 1 = Loop SPI 0 outputs to SPI 1 inputs, and SPI 1 outp
+		ts to SPI 0 inputs. The other SPI core will appear on the LS Slave Select.
+		PSU_IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1                                        0
+
+		Loopback function within MIO
+		(OFFSET, MASK, VALUE)      (0XFF180200, 0x0000000FU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_MASK | IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_MASK | IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_MASK | IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_LOOPBACK_OFFSET ,0x0000000FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_peripherals_init_data() {
+		// : RESET BLOCKS
+		// : ENET
+		/*Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		GEM 3 reset
+		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0
+
+		Software controlled reset for the GEMs
+		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : QSPI
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_QSPI_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000001U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : NAND
+		// : USB
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 reset for control registers
+		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0
+
+		USB 0 sleep circuit reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0
+
+		USB 0 reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK | CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000540U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : FPD RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		PCIE config reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0
+
+		PCIE control block level reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0
+
+		PCIE bridge block level reset (AXI interface)
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0
+
+		Display Port block level reset (includes DPDMA)
+		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0
+
+		FPD WDT reset
+		PSU_CRF_APB_RST_FPD_TOP_SWDT_RESET                                              0
+
+		GDMA block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GDMA_RESET                                              0
+
+		Pixel Processor (submodule of GPU) block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GPU_PP0_RESET                                           0
+
+		Pixel Processor (submodule of GPU) block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GPU_PP1_RESET                                           0
+
+		GPU block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GPU_RESET                                               0
+
+		GT block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GT_RESET                                                0
+
+		Sata block level reset
+		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000F807EU ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK | CRF_APB_RST_FPD_TOP_DP_RESET_MASK | CRF_APB_RST_FPD_TOP_SWDT_RESET_MASK | CRF_APB_RST_FPD_TOP_GDMA_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_RESET_MASK | CRF_APB_RST_FPD_TOP_GT_RESET_MASK | CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_SWDT_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GDMA_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GT_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000F807EU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : SD
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_SDIO1_RESET                                            0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000040U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_SDIO1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_SDIO1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000040U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : CTRL_REG_SD @ 0XFF180310

+
+		SD or eMMC selection on SDIO1 0: SD enabled 1: eMMC enabled
+		PSU_IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL                                           0
+
+		SD eMMC selection
+		(OFFSET, MASK, VALUE)      (0XFF180310, 0x00008000U ,0x00000000U)  
+		RegMask = (IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_CTRL_REG_SD_OFFSET ,0x00008000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SD_CONFIG_REG2 @ 0XFF180320

+
+		Should be set based on the final product usage 00 - Removable SCard Slot 01 - Embedded Slot for One Device 10 - Shared Bus Sl
+		t 11 - Reserved
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE                                        0
+
+		1.8V Support 1: 1.8V supported 0: 1.8V not supported support
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V                                            0
+
+		3.0V Support 1: 3.0V supported 0: 3.0V not supported support
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V                                            0
+
+		3.3V Support 1: 3.3V supported 0: 3.3V not supported support
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V                                            1
+
+		SD Config Register 2
+		(OFFSET, MASK, VALUE)      (0XFF180320, 0x33800000U ,0x00800000U)  
+		RegMask = (IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_SHIFT
+			| 0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_SHIFT
+			| 0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_SHIFT
+			| 0x00000001U << IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG2_OFFSET ,0x33800000U ,0x00800000U);
+	/*############################################################################################################################ */
+
+		// : SD1 BASE CLOCK
+		/*Register : SD_CONFIG_REG1 @ 0XFF18031C

+
+		Base Clock Frequency for SD Clock. This is the frequency of the xin_clk.
+		PSU_IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK                                         0xc7
+
+		SD Config Register 1
+		(OFFSET, MASK, VALUE)      (0XFF18031C, 0x7F800000U ,0x63800000U)  
+		RegMask = (IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK |  0 );
+
+		RegVal = ((0x000000C7U << IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG1_OFFSET ,0x7F800000U ,0x63800000U);
+	/*############################################################################################################################ */
+
+		// : CAN
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_CAN1_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000100U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_CAN1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000100U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : I2C
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_I2C0_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_I2C1_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000600U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_I2C0_RESET_MASK | CRL_APB_RST_LPD_IOU2_I2C1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_I2C0_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_I2C1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000600U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : SWDT
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_SWDT_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00008000U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_SWDT_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_SWDT_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00008000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : SPI
+		// : TTC
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC0_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC1_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC2_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC3_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00007800U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_TTC0_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC1_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC2_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_TTC0_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC1_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC2_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00007800U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : UART
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_UART0_RESET                                            0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_UART1_RESET                                            0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000006U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_UART0_RESET_MASK | CRL_APB_RST_LPD_IOU2_UART1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_UART0_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_UART1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000006U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : UART BAUD RATE
+		/*Register : Baud_rate_divider_reg0 @ 0XFF000034

+
+		Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
+		PSU_UART0_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5
+
+		Baud Rate Divider Register
+		(OFFSET, MASK, VALUE)      (0XFF000034, 0x000000FFU ,0x00000005U)  
+		RegMask = (UART0_BAUD_RATE_DIVIDER_REG0_BDIV_MASK |  0 );
+
+		RegVal = ((0x00000005U << UART0_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_BAUD_RATE_DIVIDER_REG0_OFFSET ,0x000000FFU ,0x00000005U);
+	/*############################################################################################################################ */
+
+		/*Register : Baud_rate_gen_reg0 @ 0XFF000018

+
+		Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
+		PSU_UART0_BAUD_RATE_GEN_REG0_CD                                                 0x8f
+
+		Baud Rate Generator Register.
+		(OFFSET, MASK, VALUE)      (0XFF000018, 0x0000FFFFU ,0x0000008FU)  
+		RegMask = (UART0_BAUD_RATE_GEN_REG0_CD_MASK |  0 );
+
+		RegVal = ((0x0000008FU << UART0_BAUD_RATE_GEN_REG0_CD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_BAUD_RATE_GEN_REG0_OFFSET ,0x0000FFFFU ,0x0000008FU);
+	/*############################################################################################################################ */
+
+		/*Register : Control_reg0 @ 0XFF000000

+
+		Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.
+		PSU_UART0_CONTROL_REG0_STPBRK                                                   0x0
+
+		Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
+		PSU_UART0_CONTROL_REG0_STTBRK                                                   0x0
+
+		Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.
+		PSU_UART0_CONTROL_REG0_RSTTO                                                    0x0
+
+		Transmit disable: 0: enable transmitter 1: disable transmitter
+		PSU_UART0_CONTROL_REG0_TXDIS                                                    0x0
+
+		Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
+		PSU_UART0_CONTROL_REG0_TXEN                                                     0x1
+
+		Receive disable: 0: enable 1: disable, regardless of the value of RXEN
+		PSU_UART0_CONTROL_REG0_RXDIS                                                    0x0
+
+		Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
+		PSU_UART0_CONTROL_REG0_RXEN                                                     0x1
+
+		Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.
+		PSU_UART0_CONTROL_REG0_TXRES                                                    0x1
+
+		Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.
+		PSU_UART0_CONTROL_REG0_RXRES                                                    0x1
+
+		UART Control Register
+		(OFFSET, MASK, VALUE)      (0XFF000000, 0x000001FFU ,0x00000017U)  
+		RegMask = (UART0_CONTROL_REG0_STPBRK_MASK | UART0_CONTROL_REG0_STTBRK_MASK | UART0_CONTROL_REG0_RSTTO_MASK | UART0_CONTROL_REG0_TXDIS_MASK | UART0_CONTROL_REG0_TXEN_MASK | UART0_CONTROL_REG0_RXDIS_MASK | UART0_CONTROL_REG0_RXEN_MASK | UART0_CONTROL_REG0_TXRES_MASK | UART0_CONTROL_REG0_RXRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART0_CONTROL_REG0_STPBRK_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_STTBRK_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_RSTTO_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_TXDIS_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_TXEN_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_RXDIS_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_RXEN_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_TXRES_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_RXRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_CONTROL_REG0_OFFSET ,0x000001FFU ,0x00000017U);
+	/*############################################################################################################################ */
+
+		/*Register : mode_reg0 @ 0XFF000004

+
+		Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
+		PSU_UART0_MODE_REG0_CHMODE                                                      0x0
+
+		Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved
+		PSU_UART0_MODE_REG0_NBSTOP                                                      0x0
+
+		Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
+		PSU_UART0_MODE_REG0_PAR                                                         0x4
+
+		Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
+		PSU_UART0_MODE_REG0_CHRL                                                        0x0
+
+		Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8
+		PSU_UART0_MODE_REG0_CLKS                                                        0x0
+
+		UART Mode Register
+		(OFFSET, MASK, VALUE)      (0XFF000004, 0x000003FFU ,0x00000020U)  
+		RegMask = (UART0_MODE_REG0_CHMODE_MASK | UART0_MODE_REG0_NBSTOP_MASK | UART0_MODE_REG0_PAR_MASK | UART0_MODE_REG0_CHRL_MASK | UART0_MODE_REG0_CLKS_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART0_MODE_REG0_CHMODE_SHIFT
+			| 0x00000000U << UART0_MODE_REG0_NBSTOP_SHIFT
+			| 0x00000004U << UART0_MODE_REG0_PAR_SHIFT
+			| 0x00000000U << UART0_MODE_REG0_CHRL_SHIFT
+			| 0x00000000U << UART0_MODE_REG0_CLKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_MODE_REG0_OFFSET ,0x000003FFU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : Baud_rate_divider_reg0 @ 0XFF010034

+
+		Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
+		PSU_UART1_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5
+
+		Baud Rate Divider Register
+		(OFFSET, MASK, VALUE)      (0XFF010034, 0x000000FFU ,0x00000005U)  
+		RegMask = (UART1_BAUD_RATE_DIVIDER_REG0_BDIV_MASK |  0 );
+
+		RegVal = ((0x00000005U << UART1_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_BAUD_RATE_DIVIDER_REG0_OFFSET ,0x000000FFU ,0x00000005U);
+	/*############################################################################################################################ */
+
+		/*Register : Baud_rate_gen_reg0 @ 0XFF010018

+
+		Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
+		PSU_UART1_BAUD_RATE_GEN_REG0_CD                                                 0x8f
+
+		Baud Rate Generator Register.
+		(OFFSET, MASK, VALUE)      (0XFF010018, 0x0000FFFFU ,0x0000008FU)  
+		RegMask = (UART1_BAUD_RATE_GEN_REG0_CD_MASK |  0 );
+
+		RegVal = ((0x0000008FU << UART1_BAUD_RATE_GEN_REG0_CD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_BAUD_RATE_GEN_REG0_OFFSET ,0x0000FFFFU ,0x0000008FU);
+	/*############################################################################################################################ */
+
+		/*Register : Control_reg0 @ 0XFF010000

+
+		Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.
+		PSU_UART1_CONTROL_REG0_STPBRK                                                   0x0
+
+		Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
+		PSU_UART1_CONTROL_REG0_STTBRK                                                   0x0
+
+		Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.
+		PSU_UART1_CONTROL_REG0_RSTTO                                                    0x0
+
+		Transmit disable: 0: enable transmitter 1: disable transmitter
+		PSU_UART1_CONTROL_REG0_TXDIS                                                    0x0
+
+		Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
+		PSU_UART1_CONTROL_REG0_TXEN                                                     0x1
+
+		Receive disable: 0: enable 1: disable, regardless of the value of RXEN
+		PSU_UART1_CONTROL_REG0_RXDIS                                                    0x0
+
+		Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
+		PSU_UART1_CONTROL_REG0_RXEN                                                     0x1
+
+		Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.
+		PSU_UART1_CONTROL_REG0_TXRES                                                    0x1
+
+		Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.
+		PSU_UART1_CONTROL_REG0_RXRES                                                    0x1
+
+		UART Control Register
+		(OFFSET, MASK, VALUE)      (0XFF010000, 0x000001FFU ,0x00000017U)  
+		RegMask = (UART1_CONTROL_REG0_STPBRK_MASK | UART1_CONTROL_REG0_STTBRK_MASK | UART1_CONTROL_REG0_RSTTO_MASK | UART1_CONTROL_REG0_TXDIS_MASK | UART1_CONTROL_REG0_TXEN_MASK | UART1_CONTROL_REG0_RXDIS_MASK | UART1_CONTROL_REG0_RXEN_MASK | UART1_CONTROL_REG0_TXRES_MASK | UART1_CONTROL_REG0_RXRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART1_CONTROL_REG0_STPBRK_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_STTBRK_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_RSTTO_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_TXDIS_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_TXEN_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_RXDIS_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_RXEN_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_TXRES_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_RXRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_CONTROL_REG0_OFFSET ,0x000001FFU ,0x00000017U);
+	/*############################################################################################################################ */
+
+		/*Register : mode_reg0 @ 0XFF010004

+
+		Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
+		PSU_UART1_MODE_REG0_CHMODE                                                      0x0
+
+		Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved
+		PSU_UART1_MODE_REG0_NBSTOP                                                      0x0
+
+		Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
+		PSU_UART1_MODE_REG0_PAR                                                         0x4
+
+		Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
+		PSU_UART1_MODE_REG0_CHRL                                                        0x0
+
+		Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8
+		PSU_UART1_MODE_REG0_CLKS                                                        0x0
+
+		UART Mode Register
+		(OFFSET, MASK, VALUE)      (0XFF010004, 0x000003FFU ,0x00000020U)  
+		RegMask = (UART1_MODE_REG0_CHMODE_MASK | UART1_MODE_REG0_NBSTOP_MASK | UART1_MODE_REG0_PAR_MASK | UART1_MODE_REG0_CHRL_MASK | UART1_MODE_REG0_CLKS_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART1_MODE_REG0_CHMODE_SHIFT
+			| 0x00000000U << UART1_MODE_REG0_NBSTOP_SHIFT
+			| 0x00000004U << UART1_MODE_REG0_PAR_SHIFT
+			| 0x00000000U << UART1_MODE_REG0_CHRL_SHIFT
+			| 0x00000000U << UART1_MODE_REG0_CLKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_MODE_REG0_OFFSET ,0x000003FFU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		// : GPIO
+		// : ADMA TZ
+		/*Register : slcr_adma @ 0XFF4B0024

+
+		TrustZone Classification for ADMA
+		PSU_LPD_SLCR_SECURE_SLCR_ADMA_TZ                                                0XFF
+
+		RPU TrustZone settings
+		(OFFSET, MASK, VALUE)      (0XFF4B0024, 0x000000FFU ,0x000000FFU)  
+		RegMask = (LPD_SLCR_SECURE_SLCR_ADMA_TZ_MASK |  0 );
+
+		RegVal = ((0x000000FFU << LPD_SLCR_SECURE_SLCR_ADMA_TZ_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (LPD_SLCR_SECURE_SLCR_ADMA_OFFSET ,0x000000FFU ,0x000000FFU);
+	/*############################################################################################################################ */
+
+		// : CSU TAMPERING
+		// : CSU TAMPER STATUS
+		/*Register : tamper_status @ 0XFFCA5000

+
+		CSU regsiter
+		PSU_CSU_TAMPER_STATUS_TAMPER_0                                                  0
+
+		External MIO
+		PSU_CSU_TAMPER_STATUS_TAMPER_1                                                  0
+
+		JTAG toggle detect
+		PSU_CSU_TAMPER_STATUS_TAMPER_2                                                  0
+
+		PL SEU error
+		PSU_CSU_TAMPER_STATUS_TAMPER_3                                                  0
+
+		AMS over temperature alarm for LPD
+		PSU_CSU_TAMPER_STATUS_TAMPER_4                                                  0
+
+		AMS over temperature alarm for APU
+		PSU_CSU_TAMPER_STATUS_TAMPER_5                                                  0
+
+		AMS voltage alarm for VCCPINT_FPD
+		PSU_CSU_TAMPER_STATUS_TAMPER_6                                                  0
+
+		AMS voltage alarm for VCCPINT_LPD
+		PSU_CSU_TAMPER_STATUS_TAMPER_7                                                  0
+
+		AMS voltage alarm for VCCPAUX
+		PSU_CSU_TAMPER_STATUS_TAMPER_8                                                  0
+
+		AMS voltage alarm for DDRPHY
+		PSU_CSU_TAMPER_STATUS_TAMPER_9                                                  0
+
+		AMS voltage alarm for PSIO bank 0/1/2
+		PSU_CSU_TAMPER_STATUS_TAMPER_10                                                 0
+
+		AMS voltage alarm for PSIO bank 3 (dedicated pins)
+		PSU_CSU_TAMPER_STATUS_TAMPER_11                                                 0
+
+		AMS voltaage alarm for GT
+		PSU_CSU_TAMPER_STATUS_TAMPER_12                                                 0
+
+		Tamper Response Status
+		(OFFSET, MASK, VALUE)      (0XFFCA5000, 0x00001FFFU ,0x00000000U)  
+		RegMask = (CSU_TAMPER_STATUS_TAMPER_0_MASK | CSU_TAMPER_STATUS_TAMPER_1_MASK | CSU_TAMPER_STATUS_TAMPER_2_MASK | CSU_TAMPER_STATUS_TAMPER_3_MASK | CSU_TAMPER_STATUS_TAMPER_4_MASK | CSU_TAMPER_STATUS_TAMPER_5_MASK | CSU_TAMPER_STATUS_TAMPER_6_MASK | CSU_TAMPER_STATUS_TAMPER_7_MASK | CSU_TAMPER_STATUS_TAMPER_8_MASK | CSU_TAMPER_STATUS_TAMPER_9_MASK | CSU_TAMPER_STATUS_TAMPER_10_MASK | CSU_TAMPER_STATUS_TAMPER_11_MASK | CSU_TAMPER_STATUS_TAMPER_12_MASK |  0 );
+
+		RegVal = ((0x00000000U << CSU_TAMPER_STATUS_TAMPER_0_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_1_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_2_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_3_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_4_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_5_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_6_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_7_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_8_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_9_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_10_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_11_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_12_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CSU_TAMPER_STATUS_OFFSET ,0x00001FFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CSU TAMPER RESPONSE
+		// : AFIFM INTERFACE WIDTH
+		// : CPU QOS DEFAULT
+		/*Register : ACE_CTRL @ 0XFD5C0060

+
+		Set ACE outgoing AWQOS value
+		PSU_APU_ACE_CTRL_AWQOS                                                          0X0
+
+		Set ACE outgoing ARQOS value
+		PSU_APU_ACE_CTRL_ARQOS                                                          0X0
+
+		ACE Control Register
+		(OFFSET, MASK, VALUE)      (0XFD5C0060, 0x000F000FU ,0x00000000U)  
+		RegMask = (APU_ACE_CTRL_AWQOS_MASK | APU_ACE_CTRL_ARQOS_MASK |  0 );
+
+		RegVal = ((0x00000000U << APU_ACE_CTRL_AWQOS_SHIFT
+			| 0x00000000U << APU_ACE_CTRL_ARQOS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (APU_ACE_CTRL_OFFSET ,0x000F000FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : ENABLES RTC SWITCH TO BATTERY WHEN VCC_PSAUX IS NOT AVAILABLE
+		/*Register : CONTROL @ 0XFFA60040

+
+		Enables the RTC. By writing a 0 to this bit, RTC will be powered off and the only module that potentially draws current from 
+		he battery will be BBRAM. The value read through this bit does not necessarily reflect whether RTC is enabled or not. It is e
+		pected that RTC is enabled every time it is being configured. If RTC is not used in the design, FSBL will disable it by writi
+		g a 0 to this bit.
+		PSU_RTC_CONTROL_BATTERY_DISABLE                                                 0X1
+
+		This register controls various functionalities within the RTC
+		(OFFSET, MASK, VALUE)      (0XFFA60040, 0x80000000U ,0x80000000U)  
+		RegMask = (RTC_CONTROL_BATTERY_DISABLE_MASK |  0 );
+
+		RegVal = ((0x00000001U << RTC_CONTROL_BATTERY_DISABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (RTC_CONTROL_OFFSET ,0x80000000U ,0x80000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_post_config_data() {
+		// : POST_CONFIG
+
+  return 1;
+}
+unsigned long psu_peripherals_powerdwn_data() {
+		// : POWER DOWN REQUEST INTERRUPT ENABLE
+		// : POWER DOWN TRIGGER
+
+  return 1;
+}
+unsigned long psu_serdes_init_data() {
+		// : SERDES INITIALIZATION
+		// : GT REFERENCE CLOCK SOURCE SELECTION
+		/*Register : PLL_REF_SEL0 @ 0XFD410000

+
+		PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL0_PLLREFSEL0                                              0xD
+
+		PLL0 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD410000, 0x0000001FU ,0x0000000DU)  
+		RegMask = (SERDES_PLL_REF_SEL0_PLLREFSEL0_MASK |  0 );
+
+		RegVal = ((0x0000000DU << SERDES_PLL_REF_SEL0_PLLREFSEL0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL0_OFFSET ,0x0000001FU ,0x0000000DU);
+	/*############################################################################################################################ */
+
+		/*Register : PLL_REF_SEL1 @ 0XFD410004

+
+		PLL1 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL1_PLLREFSEL1                                              0x9
+
+		PLL1 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD410004, 0x0000001FU ,0x00000009U)  
+		RegMask = (SERDES_PLL_REF_SEL1_PLLREFSEL1_MASK |  0 );
+
+		RegVal = ((0x00000009U << SERDES_PLL_REF_SEL1_PLLREFSEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL1_OFFSET ,0x0000001FU ,0x00000009U);
+	/*############################################################################################################################ */
+
+		/*Register : PLL_REF_SEL2 @ 0XFD410008

+
+		PLL2 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL2_PLLREFSEL2                                              0x8
+
+		PLL2 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD410008, 0x0000001FU ,0x00000008U)  
+		RegMask = (SERDES_PLL_REF_SEL2_PLLREFSEL2_MASK |  0 );
+
+		RegVal = ((0x00000008U << SERDES_PLL_REF_SEL2_PLLREFSEL2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL2_OFFSET ,0x0000001FU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : PLL_REF_SEL3 @ 0XFD41000C

+
+		PLL3 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL3_PLLREFSEL3                                              0xF
+
+		PLL3 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD41000C, 0x0000001FU ,0x0000000FU)  
+		RegMask = (SERDES_PLL_REF_SEL3_PLLREFSEL3_MASK |  0 );
+
+		RegVal = ((0x0000000FU << SERDES_PLL_REF_SEL3_PLLREFSEL3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL3_OFFSET ,0x0000001FU ,0x0000000FU);
+	/*############################################################################################################################ */
+
+		// : GT REFERENCE CLOCK FREQUENCY SELECTION
+		/*Register : L0_L0_REF_CLK_SEL @ 0XFD402860

+
+		Sel of lane 0 ref clock local mux. Set to 1 to select lane 0 slicer output. Set to 0 to select lane0 ref clock mux output.
+		PSU_SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL                                 0x1
+
+		Lane0 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD402860, 0x00000080U ,0x00000080U)  
+		RegMask = (SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L0_REF_CLK_SEL_OFFSET ,0x00000080U ,0x00000080U);
+	/*############################################################################################################################ */
+
+		/*Register : L0_L1_REF_CLK_SEL @ 0XFD402864

+
+		Sel of lane 1 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane1 ref clock mux output.
+		PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL                                 0x0
+
+		Bit 3 of lane 1 ref clock mux one hot sel. Set to 1 to select lane 3 slicer output from ref clock network
+		PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3                                   0x1
+
+		Lane1 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD402864, 0x00000088U ,0x00000008U)  
+		RegMask = (SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_MASK | SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_SHIFT
+			| 0x00000001U << SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L1_REF_CLK_SEL_OFFSET ,0x00000088U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : L0_L2_REF_CLK_SEL @ 0XFD402868

+
+		Sel of lane 2 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane2 ref clock mux output.
+		PSU_SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL                                 0x1
+
+		Lane2 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD402868, 0x00000080U ,0x00000080U)  
+		RegMask = (SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L2_REF_CLK_SEL_OFFSET ,0x00000080U ,0x00000080U);
+	/*############################################################################################################################ */
+
+		/*Register : L0_L3_REF_CLK_SEL @ 0XFD40286C

+
+		Sel of lane 3 ref clock local mux. Set to 1 to select lane 3 slicer output. Set to 0 to select lane3 ref clock mux output.
+		PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL                                 0x0
+
+		Bit 1 of lane 3 ref clock mux one hot sel. Set to 1 to select lane 1 slicer output from ref clock network
+		PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1                                   0x1
+
+		Lane3 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD40286C, 0x00000082U ,0x00000002U)  
+		RegMask = (SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_MASK | SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_SHIFT
+			| 0x00000001U << SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L3_REF_CLK_SEL_OFFSET ,0x00000082U ,0x00000002U);
+	/*############################################################################################################################ */
+
+		// : ENABLE SPREAD SPECTRUM
+		/*Register : L2_TM_PLL_DIG_37 @ 0XFD40A094

+
+		Enable/Disable coarse code satureation limiting logic
+		PSU_SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION                         0x1
+
+		Test mode register 37
+		(OFFSET, MASK, VALUE)      (0XFD40A094, 0x00000010U ,0x00000010U)  
+		RegMask = (SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_TM_PLL_DIG_37_OFFSET ,0x00000010U ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEPS_0_LSB @ 0XFD40A368

+
+		Spread Spectrum No of Steps [7:0]
+		PSU_SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x38
+
+		Spread Spectrum No of Steps bits 7:0
+		(OFFSET, MASK, VALUE)      (0XFD40A368, 0x000000FFU ,0x00000038U)  
+		RegMask = (SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000038U << SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000038U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEPS_1_MSB @ 0XFD40A36C

+
+		Spread Spectrum No of Steps [10:8]
+		PSU_SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x03
+
+		Spread Spectrum No of Steps bits 10:8
+		(OFFSET, MASK, VALUE)      (0XFD40A36C, 0x00000007U ,0x00000003U)  
+		RegMask = (SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );
+
+		RegVal = ((0x00000003U << SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEPS_0_LSB @ 0XFD40E368

+
+		Spread Spectrum No of Steps [7:0]
+		PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x0
+
+		Spread Spectrum No of Steps bits 7:0
+		(OFFSET, MASK, VALUE)      (0XFD40E368, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEPS_1_MSB @ 0XFD40E36C

+
+		Spread Spectrum No of Steps [10:8]
+		PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x0
+
+		Spread Spectrum No of Steps bits 10:8
+		(OFFSET, MASK, VALUE)      (0XFD40E36C, 0x00000007U ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEPS_0_LSB @ 0XFD406368

+
+		Spread Spectrum No of Steps [7:0]
+		PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x0
+
+		Spread Spectrum No of Steps bits 7:0
+		(OFFSET, MASK, VALUE)      (0XFD406368, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEPS_1_MSB @ 0XFD40636C

+
+		Spread Spectrum No of Steps [10:8]
+		PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x0
+
+		Spread Spectrum No of Steps bits 10:8
+		(OFFSET, MASK, VALUE)      (0XFD40636C, 0x00000007U ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_0_LSB @ 0XFD406370

+
+		Step Size for Spread Spectrum [7:0]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0x0
+
+		Step Size for Spread Spectrum LSB
+		(OFFSET, MASK, VALUE)      (0XFD406370, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_1 @ 0XFD406374

+
+		Step Size for Spread Spectrum [15:8]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x0
+
+		Step Size for Spread Spectrum 1
+		(OFFSET, MASK, VALUE)      (0XFD406374, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_2 @ 0XFD406378

+
+		Step Size for Spread Spectrum [23:16]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x0
+
+		Step Size for Spread Spectrum 2
+		(OFFSET, MASK, VALUE)      (0XFD406378, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40637C

+
+		Step Size for Spread Spectrum [25:24]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		Enable/Disable test mode force on SS step size
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		Enable/Disable test mode force on SS no of steps
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		Enable force on enable Spread Spectrum
+		(OFFSET, MASK, VALUE)      (0XFD40637C, 0x00000033U ,0x00000030U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
+			| 0x00000001U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
+			| 0x00000001U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x00000033U ,0x00000030U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40A370

+
+		Step Size for Spread Spectrum [7:0]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0xF4
+
+		Step Size for Spread Spectrum LSB
+		(OFFSET, MASK, VALUE)      (0XFD40A370, 0x000000FFU ,0x000000F4U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );
+
+		RegVal = ((0x000000F4U << SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x000000F4U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_1 @ 0XFD40A374

+
+		Step Size for Spread Spectrum [15:8]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x31
+
+		Step Size for Spread Spectrum 1
+		(OFFSET, MASK, VALUE)      (0XFD40A374, 0x000000FFU ,0x00000031U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );
+
+		RegVal = ((0x00000031U << SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000031U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_2 @ 0XFD40A378

+
+		Step Size for Spread Spectrum [23:16]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x2
+
+		Step Size for Spread Spectrum 2
+		(OFFSET, MASK, VALUE)      (0XFD40A378, 0x000000FFU ,0x00000002U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );
+
+		RegVal = ((0x00000002U << SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40A37C

+
+		Step Size for Spread Spectrum [25:24]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		Enable/Disable test mode force on SS step size
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		Enable/Disable test mode force on SS no of steps
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		Enable force on enable Spread Spectrum
+		(OFFSET, MASK, VALUE)      (0XFD40A37C, 0x00000033U ,0x00000030U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
+			| 0x00000001U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
+			| 0x00000001U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x00000033U ,0x00000030U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40E370

+
+		Step Size for Spread Spectrum [7:0]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0x0
+
+		Step Size for Spread Spectrum LSB
+		(OFFSET, MASK, VALUE)      (0XFD40E370, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_1 @ 0XFD40E374

+
+		Step Size for Spread Spectrum [15:8]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x0
+
+		Step Size for Spread Spectrum 1
+		(OFFSET, MASK, VALUE)      (0XFD40E374, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_2 @ 0XFD40E378

+
+		Step Size for Spread Spectrum [23:16]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x0
+
+		Step Size for Spread Spectrum 2
+		(OFFSET, MASK, VALUE)      (0XFD40E378, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40E37C

+
+		Step Size for Spread Spectrum [25:24]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		Enable/Disable test mode force on SS step size
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		Enable/Disable test mode force on SS no of steps
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		Enable test mode forcing on enable Spread Spectrum
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS                             0x1
+
+		Enable force on enable Spread Spectrum
+		(OFFSET, MASK, VALUE)      (0XFD40E37C, 0x000000B3U ,0x000000B0U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
+			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
+			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
+			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x000000B3U ,0x000000B0U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_TM_DIG_6 @ 0XFD40906C

+
+		Bypass Descrambler
+		PSU_SERDES_L2_TM_DIG_6_BYPASS_DESCRAM                                           0x1
+
+		Enable Bypass for <1> TM_DIG_CTRL_6
+		PSU_SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1
+
+		Data path test modes in decoder and descram
+		(OFFSET, MASK, VALUE)      (0XFD40906C, 0x00000003U ,0x00000003U)  
+		RegMask = (SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_MASK | SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_SHIFT
+			| 0x00000001U << SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_TM_DIG_6_OFFSET ,0x00000003U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_TX_DIG_TM_61 @ 0XFD4080F4

+
+		Bypass scrambler signal
+		PSU_SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1
+
+		Enable/disable scrambler bypass signal
+		PSU_SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1
+
+		MPHY PLL Gear and bypass scrambler
+		(OFFSET, MASK, VALUE)      (0XFD4080F4, 0x00000003U ,0x00000003U)  
+		RegMask = (SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_MASK | SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT
+			| 0x00000001U << SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_TX_DIG_TM_61_OFFSET ,0x00000003U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_FBDIV_FRAC_3_MSB @ 0XFD40E360

+
+		Enable test mode force on fractional mode enable
+		PSU_SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC                             0x1
+
+		Fractional feedback division control and fractional value for feedback division bits 26:24
+		(OFFSET, MASK, VALUE)      (0XFD40E360, 0x00000040U ,0x00000040U)  
+		RegMask = (SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_FBDIV_FRAC_3_MSB_OFFSET ,0x00000040U ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_TM_DIG_6 @ 0XFD40D06C

+
+		Bypass 8b10b decoder
+		PSU_SERDES_L3_TM_DIG_6_BYPASS_DECODER                                           0x1
+
+		Enable Bypass for <3> TM_DIG_CTRL_6
+		PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC                                         0x1
+
+		Bypass Descrambler
+		PSU_SERDES_L3_TM_DIG_6_BYPASS_DESCRAM                                           0x1
+
+		Enable Bypass for <1> TM_DIG_CTRL_6
+		PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1
+
+		Data path test modes in decoder and descram
+		(OFFSET, MASK, VALUE)      (0XFD40D06C, 0x0000000FU ,0x0000000FU)  
+		RegMask = (SERDES_L3_TM_DIG_6_BYPASS_DECODER_MASK | SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_MASK | SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_MASK | SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L3_TM_DIG_6_BYPASS_DECODER_SHIFT
+			| 0x00000001U << SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_SHIFT
+			| 0x00000001U << SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_SHIFT
+			| 0x00000001U << SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_TM_DIG_6_OFFSET ,0x0000000FU ,0x0000000FU);
+	/*############################################################################################################################ */
+
+		/*Register : L3_TX_DIG_TM_61 @ 0XFD40C0F4

+
+		Enable/disable encoder bypass signal
+		PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_ENC                                           0x1
+
+		Bypass scrambler signal
+		PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1
+
+		Enable/disable scrambler bypass signal
+		PSU_SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1
+
+		MPHY PLL Gear and bypass scrambler
+		(OFFSET, MASK, VALUE)      (0XFD40C0F4, 0x0000000BU ,0x0000000BU)  
+		RegMask = (SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_MASK | SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_MASK | SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_SHIFT
+			| 0x00000001U << SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT
+			| 0x00000001U << SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_TX_DIG_TM_61_OFFSET ,0x0000000BU ,0x0000000BU);
+	/*############################################################################################################################ */
+
+		/*Register : L3_TXPMA_ST_0 @ 0XFD40CB00

+
+		PHY Mode: 4'b000 - PCIe, 4'b001 - USB3, 4'b0010 - SATA, 4'b0100 - SGMII, 4'b0101 - DP, 4'b1000 - MPHY
+		PSU_SERDES_L3_TXPMA_ST_0_TX_PHY_MODE                                            0x21
+
+		Opmode Info
+		(OFFSET, MASK, VALUE)      (0XFD40CB00, 0x000000F0U ,0x000000F0U)  
+		RegMask = (SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK |  0 );
+
+		RegVal = ((0x00000021U << SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_TXPMA_ST_0_OFFSET ,0x000000F0U ,0x000000F0U);
+	/*############################################################################################################################ */
+
+		// : GT LANE SETTINGS
+		/*Register : ICM_CFG0 @ 0XFD410010

+
+		Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse
+		, 7 - Unused
+		PSU_SERDES_ICM_CFG0_L0_ICM_CFG                                                  1
+
+		Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused
+		 7 - Unused
+		PSU_SERDES_ICM_CFG0_L1_ICM_CFG                                                  4
+
+		ICM Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD410010, 0x00000077U ,0x00000041U)  
+		RegMask = (SERDES_ICM_CFG0_L0_ICM_CFG_MASK | SERDES_ICM_CFG0_L1_ICM_CFG_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT
+			| 0x00000004U << SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_ICM_CFG0_OFFSET ,0x00000077U ,0x00000041U);
+	/*############################################################################################################################ */
+
+		/*Register : ICM_CFG1 @ 0XFD410014

+
+		Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused
+		 7 - Unused
+		PSU_SERDES_ICM_CFG1_L2_ICM_CFG                                                  3
+
+		Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused
+		 7 - Unused
+		PSU_SERDES_ICM_CFG1_L3_ICM_CFG                                                  2
+
+		ICM Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD410014, 0x00000077U ,0x00000023U)  
+		RegMask = (SERDES_ICM_CFG1_L2_ICM_CFG_MASK | SERDES_ICM_CFG1_L3_ICM_CFG_MASK |  0 );
+
+		RegVal = ((0x00000003U << SERDES_ICM_CFG1_L2_ICM_CFG_SHIFT
+			| 0x00000002U << SERDES_ICM_CFG1_L3_ICM_CFG_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_ICM_CFG1_OFFSET ,0x00000077U ,0x00000023U);
+	/*############################################################################################################################ */
+
+		// : CHECKING PLL LOCK
+		// : ENABLE SERIAL DATA MUX DEEMPH
+		/*Register : L1_TXPMD_TM_45 @ 0XFD404CB4

+
+		Enable/disable DP post2 path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH                         0x1
+
+		Override enable/disable of DP post2 path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH                    0x1
+
+		Override enable/disable of DP post1 path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH                    0x1
+
+		Enable/disable DP main path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH                          0x1
+
+		Override enable/disable of DP main path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH                     0x1
+
+		Post or pre or main DP path selection
+		(OFFSET, MASK, VALUE)      (0XFD404CB4, 0x00000037U ,0x00000037U)  
+		RegMask = (SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TXPMD_TM_45_OFFSET ,0x00000037U ,0x00000037U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_TX_ANA_TM_118 @ 0XFD4041D8

+
+		Test register force for enabling/disablign TX deemphasis bits <17:0>
+		PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0                                0x1
+
+		Enable Override of TX deemphasis
+		(OFFSET, MASK, VALUE)      (0XFD4041D8, 0x00000001U ,0x00000001U)  
+		RegMask = (SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : ENABLE PRE EMPHAIS AND VOLTAGE SWING
+		/*Register : L1_TXPMD_TM_48 @ 0XFD404CC0

+
+		Margining factor value
+		PSU_SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR                         0
+
+		Margining factor
+		(OFFSET, MASK, VALUE)      (0XFD404CC0, 0x0000001FU ,0x00000000U)  
+		RegMask = (SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TXPMD_TM_48_OFFSET ,0x0000001FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_TX_ANA_TM_18 @ 0XFD404048

+
+		pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved
+		PSU_SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0                                   0
+
+		Override for PIPE TX de-emphasis
+		(OFFSET, MASK, VALUE)      (0XFD404048, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_resetout_init_data() {
+		// : TAKING SERDES PERIPHERAL OUT OF RESET RESET
+		// : PUTTING USB0 IN RESET
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 reset for control registers
+		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X0
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000400U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000400U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : USB0 PIPE POWER PRESENT
+		/*Register : fpd_power_prsnt @ 0XFF9D0080

+
+		This bit is used to choose between PIPE power present and 1'b1
+		PSU_USB3_0_FPD_POWER_PRSNT_OPTION                                               0X1
+
+		fpd_power_prsnt
+		(OFFSET, MASK, VALUE)      (0XFF9D0080, 0x00000001U ,0x00000001U)  
+		RegMask = (USB3_0_FPD_POWER_PRSNT_OPTION_MASK |  0 );
+
+		RegVal = ((0x00000001U << USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (USB3_0_FPD_POWER_PRSNT_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : 
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 sleep circuit reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X0
+
+		USB 0 reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X0
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000140U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000140U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING GEM0 IN RESET
+		/*Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		GEM 3 reset
+		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X0
+
+		Software controlled reset for the GEMs
+		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING SATA IN RESET
+		/*Register : sata_misc_ctrl @ 0XFD3D0100

+
+		Sata PM clock control select
+		PSU_SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL                                         0x3
+
+		Misc Contorls for SATA.This register may only be modified during bootup (while SATA block is disabled)
+		(OFFSET, MASK, VALUE)      (0XFD3D0100, 0x00000003U ,0x00000003U)  
+		RegMask = (SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_MASK |  0 );
+
+		RegVal = ((0x00000003U << SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SIOU_SATA_MISC_CTRL_OFFSET ,0x00000003U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Sata block level reset
+		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING PCIE IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		PCIE config reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X0
+
+		PCIE control block level reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X0
+
+		PCIE bridge block level reset (AXI interface)
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000E0000U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000E0000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING DP IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Display Port block level reset (includes DPDMA)
+		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_DP_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00010000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_PHY_RESET @ 0XFD4A0200

+
+		Set to '1' to hold the GT in reset. Clear to release.
+		PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X0
+
+		Reset the transmitter PHY.
+		(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000000U)  
+		RegMask = (DP_DP_PHY_RESET_GT_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << DP_DP_PHY_RESET_GT_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_PHY_RESET_OFFSET ,0x00000002U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238

+
+		Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1
+		PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0X0
+
+		Control PHY Power down
+		(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x00000000U)  
+		RegMask = (DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_TX_PHY_POWER_DOWN_OFFSET ,0x0000000FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : USB0 GFLADJ
+		/*Register : GUSB2PHYCFG @ 0XFE20C200

+
+		USB 2.0 Turnaround Time (USBTrdTim) Sets the turnaround time in PHY clocks. Specifies the response time for a MAC request to 
+		he Packet FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). The following are the required values for the minimum S
+		C bus frequency of 60 MHz. USB turnaround time is a critical certification criteria when using long cables and five hub level
+		. The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit
+		UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger 
+		alue. Note: This field is valid only in device mode.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM                                           0X9
+
+		Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio
+		 of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the
+		time when the Transceiver Select is set to 2'b00 (HS) to the time the TxValid is driven to 0 for sending the chirp-K. This de
+		ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power
+		off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur
+		ng hibernation. - This bit is valid only in device mode.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY                                             0X0
+
+		Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen
+		_n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre
+		 to the external PHY. - 1'b1: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the external PHY. 
+		ote: This bit must be set high for Port0 if PHY is used. Note: In Device mode - Before issuing any device endpoint command wh
+		n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma
+		d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet
+		d.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM                                            0X0
+
+		USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P
+		Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 
+		'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte
+		 in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i
+		 active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL                                              0X0
+
+		Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co
+		figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app
+		ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F
+		r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s
+		t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati
+		g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi
+		 when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20                                        0X1
+
+		Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1
+		full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with 
+		ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U
+		B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF                                              0X0
+
+		ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa
+		e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons
+		ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s
+		lected through DWC_USB3_HSPHY_INTERFACE.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL                                       0X1
+
+		PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a
+		 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same 
+		lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen
+		 ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I
+		 any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF                                               0X0
+
+		HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by
+		a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for 
+		dditional delays introduced by the PHY. This may be required, since the delay introduced by the PHY in generating the linesta
+		e condition may vary among PHYs. The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times.
+		The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit times. The application must program this 
+		ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH
+		 clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One
+		60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL                                             0X7
+
+		Global USB2 PHY Configuration Register The application must program this register before starting any transactions on either 
+		he SoC bus or the USB. In Device-only configurations, only one register is needed. In Host mode, per-port registers are imple
+		ented.
+		(OFFSET, MASK, VALUE)      (0XFE20C200, 0x00003FFFU ,0x00002457U)  
+		RegMask = (USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK | USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK | USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK | USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK | USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK | USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK |  0 );
+
+		RegVal = ((0x00000009U << USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT
+			| 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT
+			| 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT
+			| 0x00000007U << USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (USB3_0_XHCI_GUSB2PHYCFG_OFFSET ,0x00003FFFU ,0x00002457U);
+	/*############################################################################################################################ */
+
+		/*Register : GFLADJ @ 0XFE20C630

+
+		This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk. This register 
+		alue is used to adjust the ITP interval when GCTL[SOFITPSYNC] is set to '1'; SOF and ITP interval when GLADJ.GFLADJ_REFCLK_LP
+		_SEL is set to '1'. This field must be programmed to a non-zero value only if GFLADJ_REFCLK_LPM_SEL is set to '1' or GCTL.SOF
+		TPSYNC is set to '1'. The value is derived as follows: FLADJ_REF_CLK_FLADJ=((125000/ref_clk_period_integer)-(125000/ref_clk_p
+		riod)) * ref_clk_period where - the ref_clk_period_integer is the integer value of the ref_clk period got by truncating the d
+		cimal (fractional) value that is programmed in the GUCTL.REF_CLK_PERIOD field. - the ref_clk_period is the ref_clk period inc
+		uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ =
+		((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P
+		RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value)
+		PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ                                      0X0
+
+		Global Frame Length Adjustment Register This register provides options for the software to control the core behavior with res
+		ect to SOF (Start of Frame) and ITP (Isochronous Timestamp Packet) timers and frame timer functionality. It provides an optio
+		 to override the fladj_30mhz_reg sideband signal. In addition, it enables running SOF or ITP frame timer counters completely 
+		rom the ref_clk. This facilitates hardware LPM in host mode with the SOF or ITP counters being run from the ref_clk signal.
+		(OFFSET, MASK, VALUE)      (0XFE20C630, 0x003FFF00U ,0x00000000U)  
+		RegMask = (USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK |  0 );
+
+		RegVal = ((0x00000000U << USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (USB3_0_XHCI_GFLADJ_OFFSET ,0x003FFF00U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE0
+		/*Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD4023E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L0_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE1
+		/*Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD4063E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L1_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE2
+		/*Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD40A3E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L2_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE3
+		/*Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD40E3E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L3_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : UPDATING TWO PCIE REGISTERS DEFAULT VALUES, AS THESE REGISTERS HAVE INCORRECT RESET VALUES IN SILICON.
+		/*Register : ATTR_37 @ 0XFD480094

+
+		Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r
+		gister.; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY                          0X1
+
+		ATTR_37
+		(OFFSET, MASK, VALUE)      (0XFD480094, 0x00004000U ,0x00004000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00004000U ,0x00004000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_25 @ 0XFD480064

+
+		If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root
+		ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED                      0X1
+
+		ATTR_25
+		(OFFSET, MASK, VALUE)      (0XFD480064, 0x00000200U ,0x00000200U)  
+		RegMask = (PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_25_OFFSET ,0x00000200U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		// : PCIE SETTINGS
+		/*Register : ATTR_7 @ 0XFD48001C

+
+		Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0x0004; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_7_ATTR_BAR0                                                0x0
+
+		ATTR_7
+		(OFFSET, MASK, VALUE)      (0XFD48001C, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_7_ATTR_BAR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_7_ATTR_BAR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_7_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_8 @ 0XFD480020

+
+		Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0xFFF0; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_8_ATTR_BAR0                                                0x0
+
+		ATTR_8
+		(OFFSET, MASK, VALUE)      (0XFD480020, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_8_ATTR_BAR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_8_ATTR_BAR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_8_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_9 @ 0XFD480024

+
+		Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_9_ATTR_BAR1                                                0x0
+
+		ATTR_9
+		(OFFSET, MASK, VALUE)      (0XFD480024, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_9_ATTR_BAR1_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_9_ATTR_BAR1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_9_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_10 @ 0XFD480028

+
+		Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_10_ATTR_BAR1                                               0x0
+
+		ATTR_10
+		(OFFSET, MASK, VALUE)      (0XFD480028, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_10_ATTR_BAR1_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_10_ATTR_BAR1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_10_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_11 @ 0XFD48002C

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFFF
+		PSU_PCIE_ATTRIB_ATTR_11_ATTR_BAR2                                               0xFFFF
+
+		ATTR_11
+		(OFFSET, MASK, VALUE)      (0XFD48002C, 0x0000FFFFU ,0x0000FFFFU)  
+		RegMask = (PCIE_ATTRIB_ATTR_11_ATTR_BAR2_MASK |  0 );
+
+		RegVal = ((0x0000FFFFU << PCIE_ATTRIB_ATTR_11_ATTR_BAR2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_11_OFFSET ,0x0000FFFFU ,0x0000FFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_12 @ 0XFD480030

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0x00FF
+		PSU_PCIE_ATTRIB_ATTR_12_ATTR_BAR2                                               0xFF
+
+		ATTR_12
+		(OFFSET, MASK, VALUE)      (0XFD480030, 0x0000FFFFU ,0x000000FFU)  
+		RegMask = (PCIE_ATTRIB_ATTR_12_ATTR_BAR2_MASK |  0 );
+
+		RegVal = ((0x000000FFU << PCIE_ATTRIB_ATTR_12_ATTR_BAR2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_12_OFFSET ,0x0000FFFFU ,0x000000FFU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_13 @ 0XFD480034

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_13_ATTR_BAR3                                               0x0
+
+		ATTR_13
+		(OFFSET, MASK, VALUE)      (0XFD480034, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_13_ATTR_BAR3_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_13_ATTR_BAR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_13_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_14 @ 0XFD480038

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFFF
+		PSU_PCIE_ATTRIB_ATTR_14_ATTR_BAR3                                               0xFFFF
+
+		ATTR_14
+		(OFFSET, MASK, VALUE)      (0XFD480038, 0x0000FFFFU ,0x0000FFFFU)  
+		RegMask = (PCIE_ATTRIB_ATTR_14_ATTR_BAR3_MASK |  0 );
+
+		RegVal = ((0x0000FFFFU << PCIE_ATTRIB_ATTR_14_ATTR_BAR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_14_OFFSET ,0x0000FFFFU ,0x0000FFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_15 @ 0XFD48003C

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFF0
+		PSU_PCIE_ATTRIB_ATTR_15_ATTR_BAR4                                               0xFFF0
+
+		ATTR_15
+		(OFFSET, MASK, VALUE)      (0XFD48003C, 0x0000FFFFU ,0x0000FFF0U)  
+		RegMask = (PCIE_ATTRIB_ATTR_15_ATTR_BAR4_MASK |  0 );
+
+		RegVal = ((0x0000FFF0U << PCIE_ATTRIB_ATTR_15_ATTR_BAR4_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_15_OFFSET ,0x0000FFFFU ,0x0000FFF0U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_16 @ 0XFD480040

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0xFFF0
+		PSU_PCIE_ATTRIB_ATTR_16_ATTR_BAR4                                               0xFFF0
+
+		ATTR_16
+		(OFFSET, MASK, VALUE)      (0XFD480040, 0x0000FFFFU ,0x0000FFF0U)  
+		RegMask = (PCIE_ATTRIB_ATTR_16_ATTR_BAR4_MASK |  0 );
+
+		RegVal = ((0x0000FFF0U << PCIE_ATTRIB_ATTR_16_ATTR_BAR4_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_16_OFFSET ,0x0000FFFFU ,0x0000FFF0U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_17 @ 0XFD480044

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
+		PSU_PCIE_ATTRIB_ATTR_17_ATTR_BAR5                                               0xFFF1
+
+		ATTR_17
+		(OFFSET, MASK, VALUE)      (0XFD480044, 0x0000FFFFU ,0x0000FFF1U)  
+		RegMask = (PCIE_ATTRIB_ATTR_17_ATTR_BAR5_MASK |  0 );
+
+		RegVal = ((0x0000FFF1U << PCIE_ATTRIB_ATTR_17_ATTR_BAR5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_17_OFFSET ,0x0000FFFFU ,0x0000FFF1U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_18 @ 0XFD480048

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
+		PSU_PCIE_ATTRIB_ATTR_18_ATTR_BAR5                                               0xFFF1
+
+		ATTR_18
+		(OFFSET, MASK, VALUE)      (0XFD480048, 0x0000FFFFU ,0x0000FFF1U)  
+		RegMask = (PCIE_ATTRIB_ATTR_18_ATTR_BAR5_MASK |  0 );
+
+		RegVal = ((0x0000FFF1U << PCIE_ATTRIB_ATTR_18_ATTR_BAR5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_18_OFFSET ,0x0000FFFFU ,0x0000FFF1U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_27 @ 0XFD48006C

+
+		Specifies maximum payload supported. Valid settings are: 0- 128 bytes, 1- 256 bytes, 2- 512 bytes, 3- 1024 bytes. Transferred
+		to the Device Capabilities register. The values: 4-2048 bytes, 5- 4096 bytes are not supported; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED                      1
+
+		Endpoint L1 Acceptable Latency. Records the latency that the endpoint can withstand on transitions from L1 state to L0 (if L1
+		state supported). Valid settings are: 0h less than 1us, 1h 1 to 2us, 2h 2 to 4us, 3h 4 to 8us, 4h 8 to 16us, 5h 16 to 32us, 6
+		 32 to 64us, 7h more than 64us. For Endpoints only. Must be 0h for other devices.; EP=0x0007; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY                        0x0
+
+		ATTR_27
+		(OFFSET, MASK, VALUE)      (0XFD48006C, 0x00000738U ,0x00000100U)  
+		RegMask = (PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_MASK | PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_27_OFFSET ,0x00000738U ,0x00000100U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_50 @ 0XFD4800C8

+
+		Identifies the type of device/port as follows: 0000b PCI Express Endpoint device, 0001b Legacy PCI Express Endpoint device, 0
+		00b Root Port of PCI Express Root Complex, 0101b Upstream Port of PCI Express Switch, 0110b Downstream Port of PCI Express Sw
+		tch, 0111b PCIE Express to PCI/PCI-X Bridge, 1000b PCI/PCI-X to PCI Express Bridge. Transferred to PCI Express Capabilities r
+		gister. Must be consistent with IS_SWITCH and UPSTREAM_FACING settings.; EP=0x0000; RP=0x0004
+		PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE                          4
+
+		PCIe Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capab
+		lity.; EP=0x009C; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR                                   0
+
+		ATTR_50
+		(OFFSET, MASK, VALUE)      (0XFD4800C8, 0x0000FFF0U ,0x00000040U)  
+		RegMask = (PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_MASK | PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_MASK |  0 );
+
+		RegVal = ((0x00000004U << PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_50_OFFSET ,0x0000FFF0U ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_105 @ 0XFD4801A4

+
+		Number of credits that should be advertised for Completion data received on Virtual Channel 0. The bytes advertised must be l
+		ss than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0172; RP=0x00CD
+		PSU_PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD                              0xCD
+
+		ATTR_105
+		(OFFSET, MASK, VALUE)      (0XFD4801A4, 0x000007FFU ,0x000000CDU)  
+		RegMask = (PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_MASK |  0 );
+
+		RegVal = ((0x000000CDU << PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_105_OFFSET ,0x000007FFU ,0x000000CDU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_106 @ 0XFD4801A8

+
+		Number of credits that should be advertised for Completion headers received on Virtual Channel 0. The sum of the posted, non 
+		osted, and completion header credits must be <= 80; EP=0x0048; RP=0x0024
+		PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH                              0x24
+
+		Number of credits that should be advertised for Non-Posted headers received on Virtual Channel 0. The number of non posted da
+		a credits advertised by the block is equal to the number of non posted header credits. The sum of the posted, non posted, and
+		completion header credits must be <= 80; EP=0x0004; RP=0x000C
+		PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH                             0xC
+
+		ATTR_106
+		(OFFSET, MASK, VALUE)      (0XFD4801A8, 0x00003FFFU ,0x00000624U)  
+		RegMask = (PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_MASK | PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_MASK |  0 );
+
+		RegVal = ((0x00000024U << PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_SHIFT
+			| 0x0000000CU << PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_106_OFFSET ,0x00003FFFU ,0x00000624U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_107 @ 0XFD4801AC

+
+		Number of credits that should be advertised for Non-Posted data received on Virtual Channel 0. The number of non posted data 
+		redits advertised by the block is equal to two times the number of non posted header credits if atomic operations are support
+		d or is equal to the number of non posted header credits if atomic operations are not supported. The bytes advertised must be
+		less than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0008; RP=0x0018
+		PSU_PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD                             0x18
+
+		ATTR_107
+		(OFFSET, MASK, VALUE)      (0XFD4801AC, 0x000007FFU ,0x00000018U)  
+		RegMask = (PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_MASK |  0 );
+
+		RegVal = ((0x00000018U << PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_107_OFFSET ,0x000007FFU ,0x00000018U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_108 @ 0XFD4801B0

+
+		Number of credits that should be advertised for Posted data received on Virtual Channel 0. The bytes advertised must be less 
+		han or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0020; RP=0x00B5
+		PSU_PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD                              0xB5
+
+		ATTR_108
+		(OFFSET, MASK, VALUE)      (0XFD4801B0, 0x000007FFU ,0x000000B5U)  
+		RegMask = (PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_MASK |  0 );
+
+		RegVal = ((0x000000B5U << PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_108_OFFSET ,0x000007FFU ,0x000000B5U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_109 @ 0XFD4801B4

+
+		Not currently in use. Invert ECRC generated by block when trn_tecrc_gen_n and trn_terrfwd_n are asserted.; EP=0x0000; RP=0x00
+		0
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV                                      0x0
+
+		Enables td bit clear and ECRC trim on received TLP's FALSE == don't trim TRUE == trim.; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM                                    0x1
+
+		Enables ECRC check on received TLP's 0 == don't check 1 == always check 3 == check if enabled by ECRC check enable bit of AER
+		cap structure; EP=0x0003; RP=0x0003
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK                                         0x3
+
+		Index of last packet buffer used by TX TLM (i.e. number of buffers - 1). Calculated from max payload size supported and the n
+		mber of brams configured for transmit; EP=0x001C; RP=0x001C
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET                                 0x1c
+
+		Number of credits that should be advertised for Posted headers received on Virtual Channel 0. The sum of the posted, non post
+		d, and completion header credits must be <= 80; EP=0x0004; RP=0x0020
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH                              0x20
+
+		ATTR_109
+		(OFFSET, MASK, VALUE)      (0XFD4801B4, 0x0000FFFFU ,0x00007E20U)  
+		RegMask = (PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_MASK | PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_MASK | PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_MASK | PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_MASK | PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_SHIFT
+			| 0x00000001U << PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_SHIFT
+			| 0x00000003U << PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_SHIFT
+			| 0x0000001CU << PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_SHIFT
+			| 0x00000020U << PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_109_OFFSET ,0x0000FFFFU ,0x00007E20U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_34 @ 0XFD480088

+
+		Specifies values to be transferred to Header Type register. Bit 7 should be set to '0' indicating single-function device. Bit
+		0 identifies header as Type 0 or Type 1, with '0' indicating a Type 0 header.; EP=0x0000; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE                                        0x1
+
+		ATTR_34
+		(OFFSET, MASK, VALUE)      (0XFD480088, 0x000000FFU ,0x00000001U)  
+		RegMask = (PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_34_OFFSET ,0x000000FFU ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_53 @ 0XFD4800D4

+
+		PM Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabil
+		ty.; EP=0x0048; RP=0x0060
+		PSU_PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR                                     0x60
+
+		ATTR_53
+		(OFFSET, MASK, VALUE)      (0XFD4800D4, 0x000000FFU ,0x00000060U)  
+		RegMask = (PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_MASK |  0 );
+
+		RegVal = ((0x00000060U << PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_53_OFFSET ,0x000000FFU ,0x00000060U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_41 @ 0XFD4800A4

+
+		MSI Per-Vector Masking Capable. The value is transferred to the MSI Control Register[8]. When set, adds Mask and Pending Dwor
+		 to Cap structure; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE                 0x0
+
+		Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0
+
+		MSI Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabi
+		ity.; EP=0x0060; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR                                    0x0
+
+		Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0
+
+		ATTR_41
+		(OFFSET, MASK, VALUE)      (0XFD4800A4, 0x000003FFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_41_OFFSET ,0x000003FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_97 @ 0XFD480184

+
+		Maximum Link Width. Valid settings are: 000001b x1, 000010b x2, 000100b x4, 001000b x8.; EP=0x0004; RP=0x0004
+		PSU_PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH                            0x1
+
+		Used by LTSSM to set Maximum Link Width. Valid settings are: 000001b [x1], 000010b [x2], 000100b [x4], 001000b [x8].; EP=0x00
+		4; RP=0x0004
+		PSU_PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH                               0x1
+
+		ATTR_97
+		(OFFSET, MASK, VALUE)      (0XFD480184, 0x00000FFFU ,0x00000041U)  
+		RegMask = (PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_MASK | PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_SHIFT
+			| 0x00000001U << PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_97_OFFSET ,0x00000FFFU ,0x00000041U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_100 @ 0XFD480190

+
+		TRUE specifies upstream-facing port. FALSE specifies downstream-facing port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING                                   0x0
+
+		ATTR_100
+		(OFFSET, MASK, VALUE)      (0XFD480190, 0x00000040U ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_100_OFFSET ,0x00000040U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_101 @ 0XFD480194

+
+		Enable the routing of message TLPs to the user through the TRN RX interface. A bit value of 1 enables routing of the message 
+		LP to the user. Messages are always decoded by the message decoder. Bit 0 - ERR COR, Bit 1 - ERR NONFATAL, Bit 2 - ERR FATAL,
+		Bit 3 - INTA Bit 4 - INTB, Bit 5 - INTC, Bit 6 - INTD, Bit 7 PM_PME, Bit 8 - PME_TO_ACK, Bit 9 - unlock, Bit 10 PME_Turn_Off;
+		EP=0x0000; RP=0x07FF
+		PSU_PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE                                  0x7FF
+
+		Disable BAR filtering. Does not change the behavior of the bar hit outputs; EP=0x0000; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING                             0x1
+
+		ATTR_101
+		(OFFSET, MASK, VALUE)      (0XFD480194, 0x0000FFE2U ,0x0000FFE2U)  
+		RegMask = (PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_MASK | PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_MASK |  0 );
+
+		RegVal = ((0x000007FFU << PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_SHIFT
+			| 0x00000001U << PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_101_OFFSET ,0x0000FFE2U ,0x0000FFE2U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_37 @ 0XFD480094

+
+		Link Bandwidth notification capability. Indicates support for the link bandwidth notification status and interrupt mechanism.
+		Required for Root.; EP=0x0000; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP           0x1
+
+		ATTR_37
+		(OFFSET, MASK, VALUE)      (0XFD480094, 0x00000200U ,0x00000200U)  
+		RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00000200U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_93 @ 0XFD480174

+
+		Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L
+		_REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN                               0x1
+
+		Sets a user-defined timeout for the Replay Timer to force cause the retransmission of unacknowledged TLPs; refer to LL_REPLAY
+		TIMEOUT_EN and LL_REPLAY_TIMEOUT_FUNC to see how this value is used. The unit for this attribute is in symbol times, which is
+		4ns at GEN1 speeds and 2ns at GEN2.; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT                                  0x1000
+
+		ATTR_93
+		(OFFSET, MASK, VALUE)      (0XFD480174, 0x0000FFFFU ,0x00009000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_MASK | PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_SHIFT
+			| 0x00001000U << PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_93_OFFSET ,0x0000FFFFU ,0x00009000U);
+	/*############################################################################################################################ */
+
+		/*Register : ID @ 0XFD480200

+
+		Device ID for the the PCIe Cap Structure Device ID field
+		PSU_PCIE_ATTRIB_ID_CFG_DEV_ID                                                   0xd021
+
+		Vendor ID for the PCIe Cap Structure Vendor ID field
+		PSU_PCIE_ATTRIB_ID_CFG_VEND_ID                                                  0x10ee
+
+		ID
+		(OFFSET, MASK, VALUE)      (0XFD480200, 0xFFFFFFFFU ,0x10EED021U)  
+		RegMask = (PCIE_ATTRIB_ID_CFG_DEV_ID_MASK | PCIE_ATTRIB_ID_CFG_VEND_ID_MASK |  0 );
+
+		RegVal = ((0x0000D021U << PCIE_ATTRIB_ID_CFG_DEV_ID_SHIFT
+			| 0x000010EEU << PCIE_ATTRIB_ID_CFG_VEND_ID_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ID_OFFSET ,0xFFFFFFFFU ,0x10EED021U);
+	/*############################################################################################################################ */
+
+		/*Register : SUBSYS_ID @ 0XFD480204

+
+		Subsystem ID for the the PCIe Cap Structure Subsystem ID field
+		PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID                                         0x7
+
+		Subsystem Vendor ID for the PCIe Cap Structure Subsystem Vendor ID field
+		PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID                                    0x10ee
+
+		SUBSYS_ID
+		(OFFSET, MASK, VALUE)      (0XFD480204, 0xFFFFFFFFU ,0x10EE0007U)  
+		RegMask = (PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_MASK | PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_MASK |  0 );
+
+		RegVal = ((0x00000007U << PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_SHIFT
+			| 0x000010EEU << PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_SUBSYS_ID_OFFSET ,0xFFFFFFFFU ,0x10EE0007U);
+	/*############################################################################################################################ */
+
+		/*Register : REV_ID @ 0XFD480208

+
+		Revision ID for the the PCIe Cap Structure
+		PSU_PCIE_ATTRIB_REV_ID_CFG_REV_ID                                               0x0
+
+		REV_ID
+		(OFFSET, MASK, VALUE)      (0XFD480208, 0x000000FFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_REV_ID_CFG_REV_ID_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_REV_ID_CFG_REV_ID_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_REV_ID_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_24 @ 0XFD480060

+
+		Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		8000; RP=0x8000
+		PSU_PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE                                         0x400
+
+		ATTR_24
+		(OFFSET, MASK, VALUE)      (0XFD480060, 0x0000FFFFU ,0x00000400U)  
+		RegMask = (PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_MASK |  0 );
+
+		RegVal = ((0x00000400U << PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_24_OFFSET ,0x0000FFFFU ,0x00000400U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_25 @ 0XFD480064

+
+		Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		0005; RP=0x0006
+		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE                                         0x6
+
+		INTX Interrupt Generation Capable. If FALSE, this will cause Command[10] to be hardwired to 0.; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED                               0
+
+		ATTR_25
+		(OFFSET, MASK, VALUE)      (0XFD480064, 0x000001FFU ,0x00000006U)  
+		RegMask = (PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_MASK | PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_MASK |  0 );
+
+		RegVal = ((0x00000006U << PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_25_OFFSET ,0x000001FFU ,0x00000006U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_4 @ 0XFD480010

+
+		Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0
+
+		Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0
+
+		ATTR_4
+		(OFFSET, MASK, VALUE)      (0XFD480010, 0x00001000U ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK | PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_4_OFFSET ,0x00001000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_89 @ 0XFD480164

+
+		VSEC's Next Capability Offset pointer to the next item in the capabilities list, or 000h if this is the final capability.; EP
+		0x0140; RP=0x0140
+		PSU_PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR                                   0
+
+		ATTR_89
+		(OFFSET, MASK, VALUE)      (0XFD480164, 0x00001FFEU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_89_OFFSET ,0x00001FFEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_79 @ 0XFD48013C

+
+		CRS SW Visibility. Indicates RC can return CRS to SW. Transferred to the Root Capabilities register.; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY                         1
+
+		ATTR_79
+		(OFFSET, MASK, VALUE)      (0XFD48013C, 0x00000020U ,0x00000020U)  
+		RegMask = (PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_79_OFFSET ,0x00000020U ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_43 @ 0XFD4800AC

+
+		Indicates that the MSIX structures exists. If this is FALSE, then the MSIX structure cannot be accessed via either the link o
+		 the management port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON                                        0
+
+		ATTR_43
+		(OFFSET, MASK, VALUE)      (0XFD4800AC, 0x00000100U ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_43_OFFSET ,0x00000100U ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_resetin_init_data() {
+		// : PUTTING SERDES PERIPHERAL IN RESET
+		// : PUTTING USB0 IN RESET
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 reset for control registers
+		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X1
+
+		USB 0 sleep circuit reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X1
+
+		USB 0 reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X1
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000540U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK | CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
+			| 0x00000001U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
+			| 0x00000001U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000540U ,0x00000540U);
+	/*############################################################################################################################ */
+
+		// : PUTTING GEM0 IN RESET
+		/*Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		GEM 3 reset
+		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X1
+
+		Software controlled reset for the GEMs
+		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000008U)  
+		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : PUTTING SATA IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Sata block level reset
+		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X1
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000002U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000002U);
+	/*############################################################################################################################ */
+
+		// : PUTTING PCIE IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		PCIE config reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X1
+
+		PCIE control block level reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X1
+
+		PCIE bridge block level reset (AXI interface)
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X1
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000E0000U ,0x000E0000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
+			| 0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
+			| 0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000E0000U ,0x000E0000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING DP IN RESET
+		/*Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238

+
+		Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1
+		PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0XA
+
+		Control PHY Power down
+		(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x0000000AU)  
+		RegMask = (DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK |  0 );
+
+		RegVal = ((0x0000000AU << DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_TX_PHY_POWER_DOWN_OFFSET ,0x0000000FU ,0x0000000AU);
+	/*############################################################################################################################ */
+
+		/*Register : DP_PHY_RESET @ 0XFD4A0200

+
+		Set to '1' to hold the GT in reset. Clear to release.
+		PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X1
+
+		Reset the transmitter PHY.
+		(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000002U)  
+		RegMask = (DP_DP_PHY_RESET_GT_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << DP_DP_PHY_RESET_GT_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_PHY_RESET_OFFSET ,0x00000002U ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Display Port block level reset (includes DPDMA)
+		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X1
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00010000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_DP_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00010000U ,0x00010000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_ps_pl_isolation_removal_data() {
+		// : PS-PL POWER UP REQUEST
+		/*Register : REQ_PWRUP_INT_EN @ 0XFFD80118

+
+		Power-up Request Interrupt Enable for PL
+		PSU_PMU_GLOBAL_REQ_PWRUP_INT_EN_PL                                              1
+
+		Power-up Request Interrupt Enable Register. Writing a 1 to this location will unmask the interrupt.
+		(OFFSET, MASK, VALUE)      (0XFFD80118, 0x00800000U ,0x00800000U)  
+		RegMask = (PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_MASK |  0 );
+
+		RegVal = ((0x00000001U << PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PMU_GLOBAL_REQ_PWRUP_INT_EN_OFFSET ,0x00800000U ,0x00800000U);
+	/*############################################################################################################################ */
+
+		/*Register : REQ_PWRUP_TRIG @ 0XFFD80120

+
+		Power-up Request Trigger for PL
+		PSU_PMU_GLOBAL_REQ_PWRUP_TRIG_PL                                                1
+
+		Power-up Request Trigger Register. A write of one to this location will generate a power-up request to the PMU.
+		(OFFSET, MASK, VALUE)      (0XFFD80120, 0x00800000U ,0x00800000U)  
+		RegMask = (PMU_GLOBAL_REQ_PWRUP_TRIG_PL_MASK |  0 );
+
+		RegVal = ((0x00000001U << PMU_GLOBAL_REQ_PWRUP_TRIG_PL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PMU_GLOBAL_REQ_PWRUP_TRIG_OFFSET ,0x00800000U ,0x00800000U);
+	/*############################################################################################################################ */
+
+		// : POLL ON PL POWER STATUS
+		/*Register : REQ_PWRUP_STATUS @ 0XFFD80110

+
+		Power-up Request Status for PL
+		PSU_PMU_GLOBAL_REQ_PWRUP_STATUS_PL                                              1
+		(OFFSET, MASK, VALUE)      (0XFFD80110, 0x00800000U ,0x00000000U)  */
+		mask_pollOnValue(PMU_GLOBAL_REQ_PWRUP_STATUS_OFFSET,0x00800000U,0x00000000U);
+
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_ps_pl_reset_config_data() {
+		// : PS PL RESET SEQUENCE
+		// : FABRIC RESET USING EMIO
+		/*Register : MASK_DATA_5_MSW @ 0XFF0A002C

+
+		Operation is the same as MASK_DATA_0_LSW[MASK_0_LSW]
+		PSU_GPIO_MASK_DATA_5_MSW_MASK_5_MSW                                             0x8000
+
+		Maskable Output Data (GPIO Bank5, EMIO, Upper 16bits)
+		(OFFSET, MASK, VALUE)      (0XFF0A002C, 0xFFFF0000U ,0x80000000U)  
+		RegMask = (GPIO_MASK_DATA_5_MSW_MASK_5_MSW_MASK |  0 );
+
+		RegVal = ((0x00008000U << GPIO_MASK_DATA_5_MSW_MASK_5_MSW_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_MASK_DATA_5_MSW_OFFSET ,0xFFFF0000U ,0x80000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DIRM_5 @ 0XFF0A0344

+
+		Operation is the same as DIRM_0[DIRECTION_0]
+		PSU_GPIO_DIRM_5_DIRECTION_5                                                     0x80000000
+
+		Direction mode (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0344, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_DIRM_5_DIRECTION_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_DIRM_5_DIRECTION_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DIRM_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+		/*Register : OEN_5 @ 0XFF0A0348

+
+		Operation is the same as OEN_0[OP_ENABLE_0]
+		PSU_GPIO_OEN_5_OP_ENABLE_5                                                      0x80000000
+
+		Output enable (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0348, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_OEN_5_OP_ENABLE_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_OEN_5_OP_ENABLE_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_OEN_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DATA_5 @ 0XFF0A0054

+
+		Output Data
+		PSU_GPIO_DATA_5_DATA_5                                                          0x80000000
+
+		Output Data (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_DATA_5_DATA_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+		mask_delay(1);
+
+	/*############################################################################################################################ */
+
+		// : FABRIC RESET USING DATA_5 TOGGLE
+		/*Register : DATA_5 @ 0XFF0A0054

+
+		Output Data
+		PSU_GPIO_DATA_5_DATA_5                                                          0X00000000
+
+		Output Data (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );
+
+		RegVal = ((0x00000000U << GPIO_DATA_5_DATA_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		mask_delay(1);
+
+	/*############################################################################################################################ */
+
+		// : FABRIC RESET USING DATA_5 TOGGLE
+		/*Register : DATA_5 @ 0XFF0A0054

+
+		Output Data
+		PSU_GPIO_DATA_5_DATA_5                                                          0x80000000
+
+		Output Data (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_DATA_5_DATA_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+
+unsigned long psu_ddr_phybringup_data() {
+
+
+		unsigned int regval = 0;
+	Xil_Out32(0xFD090000U, 0x0000A845U);
+	Xil_Out32(0xFD090004U, 0x003FFFFFU);
+	Xil_Out32(0xFD09000CU, 0x00000010U);
+	Xil_Out32(0xFD090010U, 0x00000010U);
+	// PHY BRINGUP SEQ
+	while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000000FU);
+	prog_reg (0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U);
+	//poll for PHY initialization to complete 
+	while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU);
+	
+	Xil_Out32(0xFD0701B0U, 0x00000001U);
+	Xil_Out32(0xFD070320U, 0x00000001U);
+	while ((Xil_In32(0xFD070004U) & 0x0000000FU) != 0x00000001U);
+	prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U);
+	 Xil_Out32(0xFD080004, 0x0004FE01); //PUB_PIR  
+	  regval = Xil_In32(0xFD080030); //PUB_PGSR0
+	  while(regval != 0x80000FFF){   
+	     regval = Xil_In32(0xFD080030); //PUB_PGSR0 
+	  } 
+
+	
+ // Run Vref training in static read mode  
+	Xil_Out32(0xFD080200U, 0x110011C7U);
+	Xil_Out32(0xFD080018U, 0x00F01EF2U);
+	Xil_Out32(0xFD08001CU, 0x55AA0098U);
+	Xil_Out32(0xFD08142CU, 0x00001830U);
+	Xil_Out32(0xFD08146CU, 0x00001830U);
+	Xil_Out32(0xFD0814ACU, 0x00001830U);
+	Xil_Out32(0xFD0814ECU, 0x00001830U);
+	Xil_Out32(0xFD08152CU, 0x00001830U);
+	 
+
+	 Xil_Out32(0xFD080004, 0x00060001); //PUB_PIR  
+	  regval = Xil_In32(0xFD080030); //PUB_PGSR0
+	  while((regval & 0x80004001) != 0x80004001){   
+	     regval = Xil_In32(0xFD080030); //PUB_PGSR0 
+	  } 
+
+	 // Vref training is complete, disabling static read mode 
+	Xil_Out32(0xFD080200U, 0x810011C7U);
+	Xil_Out32(0xFD080018U, 0x00F12302U);
+	Xil_Out32(0xFD08001CU, 0x55AA0080U);
+	Xil_Out32(0xFD08142CU, 0x00001800U);
+	Xil_Out32(0xFD08146CU, 0x00001800U);
+	Xil_Out32(0xFD0814ACU, 0x00001800U);
+	Xil_Out32(0xFD0814ECU, 0x00001800U);
+	Xil_Out32(0xFD08152CU, 0x00001800U);
+	Xil_Out32(0xFD070180U, 0x01000040U);
+	Xil_Out32(0xFD070060U, 0x00000000U);
+	prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U);
+
+return 1; 
+}
+
+/**
+ * CRL_APB Base Address
+ */
+#define CRL_APB_BASEADDR      0XFF5E0000U
+#define CRL_APB_RST_LPD_IOU0    ( ( CRL_APB_BASEADDR ) + 0X00000230U )
+#define CRL_APB_RST_LPD_IOU1    ( ( CRL_APB_BASEADDR ) + 0X00000234U )
+#define CRL_APB_RST_LPD_IOU2    ( ( CRL_APB_BASEADDR ) + 0X00000238U )
+#define CRL_APB_RST_LPD_TOP    ( ( CRL_APB_BASEADDR ) + 0X0000023CU )
+#define CRL_APB_IOU_SWITCH_CTRL    ( ( CRL_APB_BASEADDR ) + 0X0000009CU )
+
+/**
+ * CRF_APB Base Address
+ */
+#define CRF_APB_BASEADDR      0XFD1A0000U
+
+#define CRF_APB_RST_FPD_TOP    ( ( CRF_APB_BASEADDR ) + 0X00000100U )
+#define CRF_APB_GPU_REF_CTRL    ( ( CRF_APB_BASEADDR ) + 0X00000084U )
+#define CRF_APB_RST_DDR_SS    ( ( CRF_APB_BASEADDR ) + 0X00000108U )
+#define PSU_MASK_POLL_TIME 1100000
+
+
+int mask_pollOnValue(u32 add , u32 mask, u32 value ) {
+	volatile u32 *addr = (volatile u32*) add;
+	int i = 0;
+	while ((*addr & mask)!= value) {
+		if (i == PSU_MASK_POLL_TIME) {
+			return 0;
+		}
+		i++;
+	}
+	return 1;   
+	//xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr);
+}
+
+int mask_poll(u32 add , u32 mask) {
+	volatile u32 *addr = (volatile u32*) add;
+	int i = 0;
+	while (!(*addr & mask)) {
+		if (i == PSU_MASK_POLL_TIME) {
+			return 0;
+		}
+		i++;
+	}
+	return 1;   
+	//xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr);
+}
+
+void mask_delay(u32 delay) {
+    usleep (delay);
+}
+
+u32 mask_read(u32 add , u32 mask ) {
+        volatile u32 *addr = (volatile u32*) add;
+        u32 val = (*addr & mask);
+        //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val);
+        return val;
+}
+
+
+//Following SERDES programming sequences that a user need to follow to work around the known limitation with SERDES. 
+//These sequences should done before STEP 1 and STEP 2 as described in previous section. These programming steps are
+//required for current silicon version and are likely to undergo further changes with subsequent silicon versions.
+
+
+
+int serdes_fixcal_code() {
+	int MaskStatus = 1;
+
+   // L3_TM_CALIB_DIG19
+   Xil_Out32(0xFD40EC4C,0x00000020);
+   //ICM_CFG0
+   Xil_Out32(0xFD410010,0x00000001);
+
+   //is calibration done, polling on L3_CALIB_DONE_STATUS
+   MaskStatus = mask_poll(0xFD40EF14, 0x2);
+   
+   if (MaskStatus == 0)
+   {
+        xil_printf("SERDES initialization timed out\n\r");
+   }
+ 
+   unsigned int tmp_0_1; 
+   tmp_0_1 = mask_read(0xFD400B0C, 0x3F);
+   
+   unsigned int tmp_0_2 = tmp_0_1 & (0x7); 
+   unsigned int tmp_0_3 = tmp_0_1 & (0x38);
+   //Configure ICM for de-asserting CMN_Resetn
+   Xil_Out32(0xFD410010,0x00000000);
+   Xil_Out32(0xFD410014,0x00000000);
+   
+   unsigned int tmp_0_2_mod = (tmp_0_2 <<1) | (0x1); 
+   tmp_0_2_mod = (tmp_0_2_mod <<4); 
+   
+   tmp_0_3 = tmp_0_3 >>3;
+   Xil_Out32(0xFD40EC4C,tmp_0_3);
+
+   //L3_TM_CALIB_DIG18
+   Xil_Out32(0xFD40EC48,tmp_0_2_mod);
+   return MaskStatus;
+
+
+}
+
+int serdes_enb_coarse_saturation() {
+  //Enable PLL Coarse Code saturation Logic
+   Xil_Out32(0xFD402094,0x00000010); 
+   Xil_Out32(0xFD406094,0x00000010); 
+   Xil_Out32(0xFD40A094,0x00000010); 
+   Xil_Out32(0xFD40E094,0x00000010);
+   return 1;
+}
+
+int init_serdes() {
+	int status = 1;
+	status &=  psu_resetin_init_data();
+
+	status &= serdes_fixcal_code();
+	status &= serdes_enb_coarse_saturation();
+
+    status &=  psu_serdes_init_data();
+	status &=  psu_resetout_init_data();
+
+	return status;
+}
+
+
+
+
+
+
+void init_peripheral()
+{
+	unsigned int RegValue;
+
+	/* Turn on IOU Clock */
+	//Xil_Out32( CRL_APB_IOU_SWITCH_CTRL, 0x01001500);
+
+	/* Release all resets in the IOU */
+	Xil_Out32( CRL_APB_RST_LPD_IOU0, 0x00000000);
+	Xil_Out32( CRL_APB_RST_LPD_IOU1, 0x00000000);
+	Xil_Out32( CRL_APB_RST_LPD_IOU2, 0x00000000);
+
+	/* Activate GPU clocks */
+	//Xil_Out32(CRF_APB_GPU_REF_CTRL, 0x07001500);
+
+	/* Take LPD out of reset except R5 */
+	RegValue = Xil_In32(CRL_APB_RST_LPD_TOP);
+	RegValue &= 0x7;
+	Xil_Out32( CRL_APB_RST_LPD_TOP, RegValue);
+
+	/* Take most of FPD out of reset */
+	Xil_Out32( CRF_APB_RST_FPD_TOP, 0x00000000);
+
+	/* Making DPDMA as secure */
+  unsigned int tmp_regval; 
+  tmp_regval = Xil_In32(0xFD690040);
+  tmp_regval &= ~0x00000001;
+  Xil_Out32(0xFD690040, tmp_regval);
+
+	/* Making PCIe as secure */
+  tmp_regval = Xil_In32(0xFD690030);
+  tmp_regval &= ~0x00000001;
+  Xil_Out32(0xFD690030, tmp_regval);
+}
+int
+psu_init() 
+{
+	int status = 1; 
+	status &= psu_mio_init_data ();
+	status &=   psu_pll_init_data ();
+	status &=   psu_clock_init_data ();
+
+	status &=  psu_ddr_init_data ();
+	status &=  psu_ddr_phybringup_data ();
+	status &=  psu_peripherals_init_data ();
+
+	status &=  init_serdes();
+	init_peripheral ();
+
+	status &=  psu_peripherals_powerdwn_data ();
+   
+	if (status == 0) {
+		return 1;
+	}
+	return 0;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.h
new file mode 100644
index 000000000..97a2ae16d
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.h
@@ -0,0 +1,26160 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* Use of the Software is limited solely to applications:
+* (a) running on a Xilinx device, or
+* (b) that interact with a Xilinx device through a bus or interconnect.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*
+* Except as contained in this notice, the name of the Xilinx shall not be used
+* in advertising or otherwise to promote the sale, use or other dealings in
+* this Software without prior written authorization from Xilinx.
+*
+******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file psu_init.h
+*
+* This file is automatically generated 
+*
+*****************************************************************************/
+
+
+#undef CRL_APB_RPLL_CFG_OFFSET 
+#define CRL_APB_RPLL_CFG_OFFSET                                                    0XFF5E0034
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_TO_FPD_CTRL_OFFSET 
+#define CRL_APB_RPLL_TO_FPD_CTRL_OFFSET                                            0XFF5E0048
+#undef CRL_APB_RPLL_FRAC_CFG_OFFSET 
+#define CRL_APB_RPLL_FRAC_CFG_OFFSET                                               0XFF5E0038
+#undef CRL_APB_IOPLL_CFG_OFFSET 
+#define CRL_APB_IOPLL_CFG_OFFSET                                                   0XFF5E0024
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_OFFSET 
+#define CRL_APB_IOPLL_TO_FPD_CTRL_OFFSET                                           0XFF5E0044
+#undef CRL_APB_IOPLL_FRAC_CFG_OFFSET 
+#define CRL_APB_IOPLL_FRAC_CFG_OFFSET                                              0XFF5E0028
+#undef CRF_APB_APLL_CFG_OFFSET 
+#define CRF_APB_APLL_CFG_OFFSET                                                    0XFD1A0024
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_TO_LPD_CTRL_OFFSET 
+#define CRF_APB_APLL_TO_LPD_CTRL_OFFSET                                            0XFD1A0048
+#undef CRF_APB_APLL_FRAC_CFG_OFFSET 
+#define CRF_APB_APLL_FRAC_CFG_OFFSET                                               0XFD1A0028
+#undef CRF_APB_DPLL_CFG_OFFSET 
+#define CRF_APB_DPLL_CFG_OFFSET                                                    0XFD1A0030
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_TO_LPD_CTRL_OFFSET 
+#define CRF_APB_DPLL_TO_LPD_CTRL_OFFSET                                            0XFD1A004C
+#undef CRF_APB_DPLL_FRAC_CFG_OFFSET 
+#define CRF_APB_DPLL_FRAC_CFG_OFFSET                                               0XFD1A0034
+#undef CRF_APB_VPLL_CFG_OFFSET 
+#define CRF_APB_VPLL_CFG_OFFSET                                                    0XFD1A003C
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_TO_LPD_CTRL_OFFSET 
+#define CRF_APB_VPLL_TO_LPD_CTRL_OFFSET                                            0XFD1A0050
+#undef CRF_APB_VPLL_FRAC_CFG_OFFSET 
+#define CRF_APB_VPLL_FRAC_CFG_OFFSET                                               0XFD1A0040
+
+/*PLL loop filter resistor control*/
+#undef CRL_APB_RPLL_CFG_RES_DEFVAL 
+#undef CRL_APB_RPLL_CFG_RES_SHIFT 
+#undef CRL_APB_RPLL_CFG_RES_MASK 
+#define CRL_APB_RPLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRL_APB_RPLL_CFG_RES_SHIFT                                                 0
+#define CRL_APB_RPLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRL_APB_RPLL_CFG_CP_DEFVAL 
+#undef CRL_APB_RPLL_CFG_CP_SHIFT 
+#undef CRL_APB_RPLL_CFG_CP_MASK 
+#define CRL_APB_RPLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRL_APB_RPLL_CFG_CP_SHIFT                                                  5
+#define CRL_APB_RPLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRL_APB_RPLL_CFG_LFHF_DEFVAL 
+#undef CRL_APB_RPLL_CFG_LFHF_SHIFT 
+#undef CRL_APB_RPLL_CFG_LFHF_MASK 
+#define CRL_APB_RPLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRL_APB_RPLL_CFG_LFHF_SHIFT                                                10
+#define CRL_APB_RPLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRL_APB_RPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRL_APB_RPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRL_APB_RPLL_CFG_LOCK_CNT_MASK 
+#define CRL_APB_RPLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRL_APB_RPLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRL_APB_RPLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRL_APB_RPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRL_APB_RPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRL_APB_RPLL_CFG_LOCK_DLY_MASK 
+#define CRL_APB_RPLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRL_APB_RPLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRL_APB_RPLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRL_APB_RPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRL_APB_RPLL_CTRL_PRE_SRC_MASK 
+#define CRL_APB_RPLL_CTRL_PRE_SRC_DEFVAL                                           0x00012C09
+#define CRL_APB_RPLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRL_APB_RPLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRL_APB_RPLL_CTRL_FBDIV_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_FBDIV_SHIFT 
+#undef CRL_APB_RPLL_CTRL_FBDIV_MASK 
+#define CRL_APB_RPLL_CTRL_FBDIV_DEFVAL                                             0x00012C09
+#define CRL_APB_RPLL_CTRL_FBDIV_SHIFT                                              8
+#define CRL_APB_RPLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRL_APB_RPLL_CTRL_DIV2_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_DIV2_SHIFT 
+#undef CRL_APB_RPLL_CTRL_DIV2_MASK 
+#define CRL_APB_RPLL_CTRL_DIV2_DEFVAL                                              0x00012C09
+#define CRL_APB_RPLL_CTRL_DIV2_SHIFT                                               16
+#define CRL_APB_RPLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_RPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_RPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_RPLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRL_APB_RPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRL_APB_RPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_RPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_RPLL_CTRL_RESET_MASK 
+#define CRL_APB_RPLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRL_APB_RPLL_CTRL_RESET_SHIFT                                              0
+#define CRL_APB_RPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_RPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_RPLL_CTRL_RESET_MASK 
+#define CRL_APB_RPLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRL_APB_RPLL_CTRL_RESET_SHIFT                                              0
+#define CRL_APB_RPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*RPLL is locked*/
+#undef CRL_APB_PLL_STATUS_RPLL_LOCK_DEFVAL 
+#undef CRL_APB_PLL_STATUS_RPLL_LOCK_SHIFT 
+#undef CRL_APB_PLL_STATUS_RPLL_LOCK_MASK 
+#define CRL_APB_PLL_STATUS_RPLL_LOCK_DEFVAL                                        0x00000018
+#define CRL_APB_PLL_STATUS_RPLL_LOCK_SHIFT                                         1
+#define CRL_APB_PLL_STATUS_RPLL_LOCK_MASK                                          0x00000002U
+#define CRL_APB_PLL_STATUS_OFFSET                                                  0XFF5E0040
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_RPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_RPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_RPLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRL_APB_RPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRL_APB_RPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_MASK 
+#define CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRL_APB_RPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRL_APB_RPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRL_APB_RPLL_FRAC_CFG_ENABLED_MASK 
+#define CRL_APB_RPLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRL_APB_RPLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRL_APB_RPLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRL_APB_RPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRL_APB_RPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRL_APB_RPLL_FRAC_CFG_DATA_MASK 
+#define CRL_APB_RPLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRL_APB_RPLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRL_APB_RPLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRL_APB_IOPLL_CFG_RES_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_RES_SHIFT 
+#undef CRL_APB_IOPLL_CFG_RES_MASK 
+#define CRL_APB_IOPLL_CFG_RES_DEFVAL                                               0x00000000
+#define CRL_APB_IOPLL_CFG_RES_SHIFT                                                0
+#define CRL_APB_IOPLL_CFG_RES_MASK                                                 0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRL_APB_IOPLL_CFG_CP_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_CP_SHIFT 
+#undef CRL_APB_IOPLL_CFG_CP_MASK 
+#define CRL_APB_IOPLL_CFG_CP_DEFVAL                                                0x00000000
+#define CRL_APB_IOPLL_CFG_CP_SHIFT                                                 5
+#define CRL_APB_IOPLL_CFG_CP_MASK                                                  0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRL_APB_IOPLL_CFG_LFHF_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_LFHF_SHIFT 
+#undef CRL_APB_IOPLL_CFG_LFHF_MASK 
+#define CRL_APB_IOPLL_CFG_LFHF_DEFVAL                                              0x00000000
+#define CRL_APB_IOPLL_CFG_LFHF_SHIFT                                               10
+#define CRL_APB_IOPLL_CFG_LFHF_MASK                                                0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRL_APB_IOPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRL_APB_IOPLL_CFG_LOCK_CNT_MASK 
+#define CRL_APB_IOPLL_CFG_LOCK_CNT_DEFVAL                                          0x00000000
+#define CRL_APB_IOPLL_CFG_LOCK_CNT_SHIFT                                           13
+#define CRL_APB_IOPLL_CFG_LOCK_CNT_MASK                                            0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRL_APB_IOPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRL_APB_IOPLL_CFG_LOCK_DLY_MASK 
+#define CRL_APB_IOPLL_CFG_LOCK_DLY_DEFVAL                                          0x00000000
+#define CRL_APB_IOPLL_CFG_LOCK_DLY_SHIFT                                           25
+#define CRL_APB_IOPLL_CFG_LOCK_DLY_MASK                                            0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRL_APB_IOPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_PRE_SRC_MASK 
+#define CRL_APB_IOPLL_CTRL_PRE_SRC_DEFVAL                                          0x00012C09
+#define CRL_APB_IOPLL_CTRL_PRE_SRC_SHIFT                                           20
+#define CRL_APB_IOPLL_CTRL_PRE_SRC_MASK                                            0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRL_APB_IOPLL_CTRL_FBDIV_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_FBDIV_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_FBDIV_MASK 
+#define CRL_APB_IOPLL_CTRL_FBDIV_DEFVAL                                            0x00012C09
+#define CRL_APB_IOPLL_CTRL_FBDIV_SHIFT                                             8
+#define CRL_APB_IOPLL_CTRL_FBDIV_MASK                                              0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRL_APB_IOPLL_CTRL_DIV2_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_DIV2_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_DIV2_MASK 
+#define CRL_APB_IOPLL_CTRL_DIV2_DEFVAL                                             0x00012C09
+#define CRL_APB_IOPLL_CTRL_DIV2_SHIFT                                              16
+#define CRL_APB_IOPLL_CTRL_DIV2_MASK                                               0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL                                           0x00012C09
+#define CRL_APB_IOPLL_CTRL_BYPASS_SHIFT                                            3
+#define CRL_APB_IOPLL_CTRL_BYPASS_MASK                                             0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_IOPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_RESET_MASK 
+#define CRL_APB_IOPLL_CTRL_RESET_DEFVAL                                            0x00012C09
+#define CRL_APB_IOPLL_CTRL_RESET_SHIFT                                             0
+#define CRL_APB_IOPLL_CTRL_RESET_MASK                                              0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_IOPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_RESET_MASK 
+#define CRL_APB_IOPLL_CTRL_RESET_DEFVAL                                            0x00012C09
+#define CRL_APB_IOPLL_CTRL_RESET_SHIFT                                             0
+#define CRL_APB_IOPLL_CTRL_RESET_MASK                                              0x00000001U
+
+/*IOPLL is locked*/
+#undef CRL_APB_PLL_STATUS_IOPLL_LOCK_DEFVAL 
+#undef CRL_APB_PLL_STATUS_IOPLL_LOCK_SHIFT 
+#undef CRL_APB_PLL_STATUS_IOPLL_LOCK_MASK 
+#define CRL_APB_PLL_STATUS_IOPLL_LOCK_DEFVAL                                       0x00000018
+#define CRL_APB_PLL_STATUS_IOPLL_LOCK_SHIFT                                        0
+#define CRL_APB_PLL_STATUS_IOPLL_LOCK_MASK                                         0x00000001U
+#define CRL_APB_PLL_STATUS_OFFSET                                                  0XFF5E0040
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL                                           0x00012C09
+#define CRL_APB_IOPLL_CTRL_BYPASS_SHIFT                                            3
+#define CRL_APB_IOPLL_CTRL_BYPASS_MASK                                             0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_MASK 
+#define CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL                                  0x00000400
+#define CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_SHIFT                                   8
+#define CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRL_APB_IOPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRL_APB_IOPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRL_APB_IOPLL_FRAC_CFG_ENABLED_MASK 
+#define CRL_APB_IOPLL_FRAC_CFG_ENABLED_DEFVAL                                      0x00000000
+#define CRL_APB_IOPLL_FRAC_CFG_ENABLED_SHIFT                                       31
+#define CRL_APB_IOPLL_FRAC_CFG_ENABLED_MASK                                        0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRL_APB_IOPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRL_APB_IOPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRL_APB_IOPLL_FRAC_CFG_DATA_MASK 
+#define CRL_APB_IOPLL_FRAC_CFG_DATA_DEFVAL                                         0x00000000
+#define CRL_APB_IOPLL_FRAC_CFG_DATA_SHIFT                                          0
+#define CRL_APB_IOPLL_FRAC_CFG_DATA_MASK                                           0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRF_APB_APLL_CFG_RES_DEFVAL 
+#undef CRF_APB_APLL_CFG_RES_SHIFT 
+#undef CRF_APB_APLL_CFG_RES_MASK 
+#define CRF_APB_APLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRF_APB_APLL_CFG_RES_SHIFT                                                 0
+#define CRF_APB_APLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRF_APB_APLL_CFG_CP_DEFVAL 
+#undef CRF_APB_APLL_CFG_CP_SHIFT 
+#undef CRF_APB_APLL_CFG_CP_MASK 
+#define CRF_APB_APLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRF_APB_APLL_CFG_CP_SHIFT                                                  5
+#define CRF_APB_APLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRF_APB_APLL_CFG_LFHF_DEFVAL 
+#undef CRF_APB_APLL_CFG_LFHF_SHIFT 
+#undef CRF_APB_APLL_CFG_LFHF_MASK 
+#define CRF_APB_APLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRF_APB_APLL_CFG_LFHF_SHIFT                                                10
+#define CRF_APB_APLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRF_APB_APLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRF_APB_APLL_CFG_LOCK_CNT_SHIFT 
+#undef CRF_APB_APLL_CFG_LOCK_CNT_MASK 
+#define CRF_APB_APLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRF_APB_APLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRF_APB_APLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRF_APB_APLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRF_APB_APLL_CFG_LOCK_DLY_SHIFT 
+#undef CRF_APB_APLL_CFG_LOCK_DLY_MASK 
+#define CRF_APB_APLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRF_APB_APLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRF_APB_APLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRF_APB_APLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRF_APB_APLL_CTRL_PRE_SRC_SHIFT 
+#undef CRF_APB_APLL_CTRL_PRE_SRC_MASK 
+#define CRF_APB_APLL_CTRL_PRE_SRC_DEFVAL                                           0x00012C09
+#define CRF_APB_APLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRF_APB_APLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRF_APB_APLL_CTRL_FBDIV_DEFVAL 
+#undef CRF_APB_APLL_CTRL_FBDIV_SHIFT 
+#undef CRF_APB_APLL_CTRL_FBDIV_MASK 
+#define CRF_APB_APLL_CTRL_FBDIV_DEFVAL                                             0x00012C09
+#define CRF_APB_APLL_CTRL_FBDIV_SHIFT                                              8
+#define CRF_APB_APLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRF_APB_APLL_CTRL_DIV2_DEFVAL 
+#undef CRF_APB_APLL_CTRL_DIV2_SHIFT 
+#undef CRF_APB_APLL_CTRL_DIV2_MASK 
+#define CRF_APB_APLL_CTRL_DIV2_DEFVAL                                              0x00012C09
+#define CRF_APB_APLL_CTRL_DIV2_SHIFT                                               16
+#define CRF_APB_APLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_APLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_APLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_APLL_CTRL_BYPASS_MASK 
+#define CRF_APB_APLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRF_APB_APLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_APLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_APLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_APLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_APLL_CTRL_RESET_MASK 
+#define CRF_APB_APLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRF_APB_APLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_APLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_APLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_APLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_APLL_CTRL_RESET_MASK 
+#define CRF_APB_APLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRF_APB_APLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_APLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*APLL is locked*/
+#undef CRF_APB_PLL_STATUS_APLL_LOCK_DEFVAL 
+#undef CRF_APB_PLL_STATUS_APLL_LOCK_SHIFT 
+#undef CRF_APB_PLL_STATUS_APLL_LOCK_MASK 
+#define CRF_APB_PLL_STATUS_APLL_LOCK_DEFVAL                                        0x00000038
+#define CRF_APB_PLL_STATUS_APLL_LOCK_SHIFT                                         0
+#define CRF_APB_PLL_STATUS_APLL_LOCK_MASK                                          0x00000001U
+#define CRF_APB_PLL_STATUS_OFFSET                                                  0XFD1A0044
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_APLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_APLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_APLL_CTRL_BYPASS_MASK 
+#define CRF_APB_APLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRF_APB_APLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_APLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRF_APB_APLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRF_APB_APLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRF_APB_APLL_FRAC_CFG_ENABLED_MASK 
+#define CRF_APB_APLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRF_APB_APLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRF_APB_APLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRF_APB_APLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRF_APB_APLL_FRAC_CFG_DATA_SHIFT 
+#undef CRF_APB_APLL_FRAC_CFG_DATA_MASK 
+#define CRF_APB_APLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRF_APB_APLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRF_APB_APLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRF_APB_DPLL_CFG_RES_DEFVAL 
+#undef CRF_APB_DPLL_CFG_RES_SHIFT 
+#undef CRF_APB_DPLL_CFG_RES_MASK 
+#define CRF_APB_DPLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRF_APB_DPLL_CFG_RES_SHIFT                                                 0
+#define CRF_APB_DPLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRF_APB_DPLL_CFG_CP_DEFVAL 
+#undef CRF_APB_DPLL_CFG_CP_SHIFT 
+#undef CRF_APB_DPLL_CFG_CP_MASK 
+#define CRF_APB_DPLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRF_APB_DPLL_CFG_CP_SHIFT                                                  5
+#define CRF_APB_DPLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRF_APB_DPLL_CFG_LFHF_DEFVAL 
+#undef CRF_APB_DPLL_CFG_LFHF_SHIFT 
+#undef CRF_APB_DPLL_CFG_LFHF_MASK 
+#define CRF_APB_DPLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRF_APB_DPLL_CFG_LFHF_SHIFT                                                10
+#define CRF_APB_DPLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRF_APB_DPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRF_APB_DPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRF_APB_DPLL_CFG_LOCK_CNT_MASK 
+#define CRF_APB_DPLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRF_APB_DPLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRF_APB_DPLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRF_APB_DPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRF_APB_DPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRF_APB_DPLL_CFG_LOCK_DLY_MASK 
+#define CRF_APB_DPLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRF_APB_DPLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRF_APB_DPLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRF_APB_DPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRF_APB_DPLL_CTRL_PRE_SRC_MASK 
+#define CRF_APB_DPLL_CTRL_PRE_SRC_DEFVAL                                           0x00002C09
+#define CRF_APB_DPLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRF_APB_DPLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRF_APB_DPLL_CTRL_FBDIV_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_FBDIV_SHIFT 
+#undef CRF_APB_DPLL_CTRL_FBDIV_MASK 
+#define CRF_APB_DPLL_CTRL_FBDIV_DEFVAL                                             0x00002C09
+#define CRF_APB_DPLL_CTRL_FBDIV_SHIFT                                              8
+#define CRF_APB_DPLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRF_APB_DPLL_CTRL_DIV2_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_DIV2_SHIFT 
+#undef CRF_APB_DPLL_CTRL_DIV2_MASK 
+#define CRF_APB_DPLL_CTRL_DIV2_DEFVAL                                              0x00002C09
+#define CRF_APB_DPLL_CTRL_DIV2_SHIFT                                               16
+#define CRF_APB_DPLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_DPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_DPLL_CTRL_BYPASS_DEFVAL                                            0x00002C09
+#define CRF_APB_DPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_DPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_DPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_DPLL_CTRL_RESET_MASK 
+#define CRF_APB_DPLL_CTRL_RESET_DEFVAL                                             0x00002C09
+#define CRF_APB_DPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_DPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_DPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_DPLL_CTRL_RESET_MASK 
+#define CRF_APB_DPLL_CTRL_RESET_DEFVAL                                             0x00002C09
+#define CRF_APB_DPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_DPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*DPLL is locked*/
+#undef CRF_APB_PLL_STATUS_DPLL_LOCK_DEFVAL 
+#undef CRF_APB_PLL_STATUS_DPLL_LOCK_SHIFT 
+#undef CRF_APB_PLL_STATUS_DPLL_LOCK_MASK 
+#define CRF_APB_PLL_STATUS_DPLL_LOCK_DEFVAL                                        0x00000038
+#define CRF_APB_PLL_STATUS_DPLL_LOCK_SHIFT                                         1
+#define CRF_APB_PLL_STATUS_DPLL_LOCK_MASK                                          0x00000002U
+#define CRF_APB_PLL_STATUS_OFFSET                                                  0XFD1A0044
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_DPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_DPLL_CTRL_BYPASS_DEFVAL                                            0x00002C09
+#define CRF_APB_DPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_DPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRF_APB_DPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRF_APB_DPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRF_APB_DPLL_FRAC_CFG_ENABLED_MASK 
+#define CRF_APB_DPLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRF_APB_DPLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRF_APB_DPLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRF_APB_DPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRF_APB_DPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRF_APB_DPLL_FRAC_CFG_DATA_MASK 
+#define CRF_APB_DPLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRF_APB_DPLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRF_APB_DPLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRF_APB_VPLL_CFG_RES_DEFVAL 
+#undef CRF_APB_VPLL_CFG_RES_SHIFT 
+#undef CRF_APB_VPLL_CFG_RES_MASK 
+#define CRF_APB_VPLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRF_APB_VPLL_CFG_RES_SHIFT                                                 0
+#define CRF_APB_VPLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRF_APB_VPLL_CFG_CP_DEFVAL 
+#undef CRF_APB_VPLL_CFG_CP_SHIFT 
+#undef CRF_APB_VPLL_CFG_CP_MASK 
+#define CRF_APB_VPLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRF_APB_VPLL_CFG_CP_SHIFT                                                  5
+#define CRF_APB_VPLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRF_APB_VPLL_CFG_LFHF_DEFVAL 
+#undef CRF_APB_VPLL_CFG_LFHF_SHIFT 
+#undef CRF_APB_VPLL_CFG_LFHF_MASK 
+#define CRF_APB_VPLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRF_APB_VPLL_CFG_LFHF_SHIFT                                                10
+#define CRF_APB_VPLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRF_APB_VPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRF_APB_VPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRF_APB_VPLL_CFG_LOCK_CNT_MASK 
+#define CRF_APB_VPLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRF_APB_VPLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRF_APB_VPLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRF_APB_VPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRF_APB_VPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRF_APB_VPLL_CFG_LOCK_DLY_MASK 
+#define CRF_APB_VPLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRF_APB_VPLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRF_APB_VPLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRF_APB_VPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRF_APB_VPLL_CTRL_PRE_SRC_MASK 
+#define CRF_APB_VPLL_CTRL_PRE_SRC_DEFVAL                                           0x00012809
+#define CRF_APB_VPLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRF_APB_VPLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRF_APB_VPLL_CTRL_FBDIV_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_FBDIV_SHIFT 
+#undef CRF_APB_VPLL_CTRL_FBDIV_MASK 
+#define CRF_APB_VPLL_CTRL_FBDIV_DEFVAL                                             0x00012809
+#define CRF_APB_VPLL_CTRL_FBDIV_SHIFT                                              8
+#define CRF_APB_VPLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRF_APB_VPLL_CTRL_DIV2_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_DIV2_SHIFT 
+#undef CRF_APB_VPLL_CTRL_DIV2_MASK 
+#define CRF_APB_VPLL_CTRL_DIV2_DEFVAL                                              0x00012809
+#define CRF_APB_VPLL_CTRL_DIV2_SHIFT                                               16
+#define CRF_APB_VPLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_VPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_VPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_VPLL_CTRL_BYPASS_DEFVAL                                            0x00012809
+#define CRF_APB_VPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_VPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_VPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_VPLL_CTRL_RESET_MASK 
+#define CRF_APB_VPLL_CTRL_RESET_DEFVAL                                             0x00012809
+#define CRF_APB_VPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_VPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_VPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_VPLL_CTRL_RESET_MASK 
+#define CRF_APB_VPLL_CTRL_RESET_DEFVAL                                             0x00012809
+#define CRF_APB_VPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_VPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*VPLL is locked*/
+#undef CRF_APB_PLL_STATUS_VPLL_LOCK_DEFVAL 
+#undef CRF_APB_PLL_STATUS_VPLL_LOCK_SHIFT 
+#undef CRF_APB_PLL_STATUS_VPLL_LOCK_MASK 
+#define CRF_APB_PLL_STATUS_VPLL_LOCK_DEFVAL                                        0x00000038
+#define CRF_APB_PLL_STATUS_VPLL_LOCK_SHIFT                                         2
+#define CRF_APB_PLL_STATUS_VPLL_LOCK_MASK                                          0x00000004U
+#define CRF_APB_PLL_STATUS_OFFSET                                                  0XFD1A0044
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_VPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_VPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_VPLL_CTRL_BYPASS_DEFVAL                                            0x00012809
+#define CRF_APB_VPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_VPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRF_APB_VPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRF_APB_VPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRF_APB_VPLL_FRAC_CFG_ENABLED_MASK 
+#define CRF_APB_VPLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRF_APB_VPLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRF_APB_VPLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRF_APB_VPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRF_APB_VPLL_FRAC_CFG_DATA_MASK 
+#define CRF_APB_VPLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRF_APB_VPLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+#undef CRL_APB_GEM0_REF_CTRL_OFFSET 
+#define CRL_APB_GEM0_REF_CTRL_OFFSET                                               0XFF5E0050
+#undef CRL_APB_GEM1_REF_CTRL_OFFSET 
+#define CRL_APB_GEM1_REF_CTRL_OFFSET                                               0XFF5E0054
+#undef CRL_APB_GEM2_REF_CTRL_OFFSET 
+#define CRL_APB_GEM2_REF_CTRL_OFFSET                                               0XFF5E0058
+#undef CRL_APB_GEM3_REF_CTRL_OFFSET 
+#define CRL_APB_GEM3_REF_CTRL_OFFSET                                               0XFF5E005C
+#undef CRL_APB_GEM_TSU_REF_CTRL_OFFSET 
+#define CRL_APB_GEM_TSU_REF_CTRL_OFFSET                                            0XFF5E0100
+#undef CRL_APB_USB0_BUS_REF_CTRL_OFFSET 
+#define CRL_APB_USB0_BUS_REF_CTRL_OFFSET                                           0XFF5E0060
+#undef CRL_APB_USB1_BUS_REF_CTRL_OFFSET 
+#define CRL_APB_USB1_BUS_REF_CTRL_OFFSET                                           0XFF5E0064
+#undef CRL_APB_USB3_DUAL_REF_CTRL_OFFSET 
+#define CRL_APB_USB3_DUAL_REF_CTRL_OFFSET                                          0XFF5E004C
+#undef CRL_APB_QSPI_REF_CTRL_OFFSET 
+#define CRL_APB_QSPI_REF_CTRL_OFFSET                                               0XFF5E0068
+#undef CRL_APB_SDIO0_REF_CTRL_OFFSET 
+#define CRL_APB_SDIO0_REF_CTRL_OFFSET                                              0XFF5E006C
+#undef CRL_APB_SDIO1_REF_CTRL_OFFSET 
+#define CRL_APB_SDIO1_REF_CTRL_OFFSET                                              0XFF5E0070
+#undef IOU_SLCR_SDIO_CLK_CTRL_OFFSET 
+#define IOU_SLCR_SDIO_CLK_CTRL_OFFSET                                              0XFF18030C
+#undef CRL_APB_UART0_REF_CTRL_OFFSET 
+#define CRL_APB_UART0_REF_CTRL_OFFSET                                              0XFF5E0074
+#undef CRL_APB_UART1_REF_CTRL_OFFSET 
+#define CRL_APB_UART1_REF_CTRL_OFFSET                                              0XFF5E0078
+#undef CRL_APB_I2C0_REF_CTRL_OFFSET 
+#define CRL_APB_I2C0_REF_CTRL_OFFSET                                               0XFF5E0120
+#undef CRL_APB_I2C1_REF_CTRL_OFFSET 
+#define CRL_APB_I2C1_REF_CTRL_OFFSET                                               0XFF5E0124
+#undef CRL_APB_SPI0_REF_CTRL_OFFSET 
+#define CRL_APB_SPI0_REF_CTRL_OFFSET                                               0XFF5E007C
+#undef CRL_APB_SPI1_REF_CTRL_OFFSET 
+#define CRL_APB_SPI1_REF_CTRL_OFFSET                                               0XFF5E0080
+#undef CRL_APB_CAN0_REF_CTRL_OFFSET 
+#define CRL_APB_CAN0_REF_CTRL_OFFSET                                               0XFF5E0084
+#undef CRL_APB_CAN1_REF_CTRL_OFFSET 
+#define CRL_APB_CAN1_REF_CTRL_OFFSET                                               0XFF5E0088
+#undef CRL_APB_CPU_R5_CTRL_OFFSET 
+#define CRL_APB_CPU_R5_CTRL_OFFSET                                                 0XFF5E0090
+#undef CRL_APB_IOU_SWITCH_CTRL_OFFSET 
+#define CRL_APB_IOU_SWITCH_CTRL_OFFSET                                             0XFF5E009C
+#undef CRL_APB_CSU_PLL_CTRL_OFFSET 
+#define CRL_APB_CSU_PLL_CTRL_OFFSET                                                0XFF5E00A0
+#undef CRL_APB_PCAP_CTRL_OFFSET 
+#define CRL_APB_PCAP_CTRL_OFFSET                                                   0XFF5E00A4
+#undef CRL_APB_LPD_SWITCH_CTRL_OFFSET 
+#define CRL_APB_LPD_SWITCH_CTRL_OFFSET                                             0XFF5E00A8
+#undef CRL_APB_LPD_LSBUS_CTRL_OFFSET 
+#define CRL_APB_LPD_LSBUS_CTRL_OFFSET                                              0XFF5E00AC
+#undef CRL_APB_DBG_LPD_CTRL_OFFSET 
+#define CRL_APB_DBG_LPD_CTRL_OFFSET                                                0XFF5E00B0
+#undef CRL_APB_NAND_REF_CTRL_OFFSET 
+#define CRL_APB_NAND_REF_CTRL_OFFSET                                               0XFF5E00B4
+#undef CRL_APB_ADMA_REF_CTRL_OFFSET 
+#define CRL_APB_ADMA_REF_CTRL_OFFSET                                               0XFF5E00B8
+#undef CRL_APB_PL0_REF_CTRL_OFFSET 
+#define CRL_APB_PL0_REF_CTRL_OFFSET                                                0XFF5E00C0
+#undef CRL_APB_PL1_REF_CTRL_OFFSET 
+#define CRL_APB_PL1_REF_CTRL_OFFSET                                                0XFF5E00C4
+#undef CRL_APB_PL2_REF_CTRL_OFFSET 
+#define CRL_APB_PL2_REF_CTRL_OFFSET                                                0XFF5E00C8
+#undef CRL_APB_PL3_REF_CTRL_OFFSET 
+#define CRL_APB_PL3_REF_CTRL_OFFSET                                                0XFF5E00CC
+#undef CRL_APB_AMS_REF_CTRL_OFFSET 
+#define CRL_APB_AMS_REF_CTRL_OFFSET                                                0XFF5E0108
+#undef CRL_APB_DLL_REF_CTRL_OFFSET 
+#define CRL_APB_DLL_REF_CTRL_OFFSET                                                0XFF5E0104
+#undef CRL_APB_TIMESTAMP_REF_CTRL_OFFSET 
+#define CRL_APB_TIMESTAMP_REF_CTRL_OFFSET                                          0XFF5E0128
+#undef CRF_APB_SATA_REF_CTRL_OFFSET 
+#define CRF_APB_SATA_REF_CTRL_OFFSET                                               0XFD1A00A0
+#undef CRF_APB_PCIE_REF_CTRL_OFFSET 
+#define CRF_APB_PCIE_REF_CTRL_OFFSET                                               0XFD1A00B4
+#undef CRF_APB_DP_VIDEO_REF_CTRL_OFFSET 
+#define CRF_APB_DP_VIDEO_REF_CTRL_OFFSET                                           0XFD1A0070
+#undef CRF_APB_DP_AUDIO_REF_CTRL_OFFSET 
+#define CRF_APB_DP_AUDIO_REF_CTRL_OFFSET                                           0XFD1A0074
+#undef CRF_APB_DP_STC_REF_CTRL_OFFSET 
+#define CRF_APB_DP_STC_REF_CTRL_OFFSET                                             0XFD1A007C
+#undef CRF_APB_ACPU_CTRL_OFFSET 
+#define CRF_APB_ACPU_CTRL_OFFSET                                                   0XFD1A0060
+#undef CRF_APB_DBG_TRACE_CTRL_OFFSET 
+#define CRF_APB_DBG_TRACE_CTRL_OFFSET                                              0XFD1A0064
+#undef CRF_APB_DBG_FPD_CTRL_OFFSET 
+#define CRF_APB_DBG_FPD_CTRL_OFFSET                                                0XFD1A0068
+#undef CRF_APB_DDR_CTRL_OFFSET 
+#define CRF_APB_DDR_CTRL_OFFSET                                                    0XFD1A0080
+#undef CRF_APB_GPU_REF_CTRL_OFFSET 
+#define CRF_APB_GPU_REF_CTRL_OFFSET                                                0XFD1A0084
+#undef CRF_APB_GDMA_REF_CTRL_OFFSET 
+#define CRF_APB_GDMA_REF_CTRL_OFFSET                                               0XFD1A00B8
+#undef CRF_APB_DPDMA_REF_CTRL_OFFSET 
+#define CRF_APB_DPDMA_REF_CTRL_OFFSET                                              0XFD1A00BC
+#undef CRF_APB_TOPSW_MAIN_CTRL_OFFSET 
+#define CRF_APB_TOPSW_MAIN_CTRL_OFFSET                                             0XFD1A00C0
+#undef CRF_APB_TOPSW_LSBUS_CTRL_OFFSET 
+#define CRF_APB_TOPSW_LSBUS_CTRL_OFFSET                                            0XFD1A00C4
+#undef CRF_APB_GTGREF0_REF_CTRL_OFFSET 
+#define CRF_APB_GTGREF0_REF_CTRL_OFFSET                                            0XFD1A00C8
+#undef CRF_APB_DBG_TSTMP_CTRL_OFFSET 
+#define CRF_APB_DBG_TSTMP_CTRL_OFFSET                                              0XFD1A00F8
+#undef IOU_SLCR_IOU_TTC_APB_CLK_OFFSET 
+#define IOU_SLCR_IOU_TTC_APB_CLK_OFFSET                                            0XFF180380
+#undef FPD_SLCR_WDT_CLK_SEL_OFFSET 
+#define FPD_SLCR_WDT_CLK_SEL_OFFSET                                                0XFD610100
+#undef IOU_SLCR_WDT_CLK_SEL_OFFSET 
+#define IOU_SLCR_WDT_CLK_SEL_OFFSET                                                0XFF180300
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET 
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET                                         0XFF410050
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM0_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM1_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM2_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM3_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM3_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM3_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM3_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM3_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM3_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM3_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM3_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL                                   0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT                                    8
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL                                     0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT                                      0
+#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK                                       0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL                                   0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT                                    16
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK                                     0x003F0000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL                                     0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT                                      24
+#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK                                       0x01000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_CLKACT_DEFVAL                                    0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT                                     25
+#define CRL_APB_USB0_BUS_REF_CTRL_CLKACT_MASK                                      0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_DEFVAL                                  0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_DEFVAL                                  0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_DEFVAL                                    0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL                                    0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT                                     25
+#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK                                      0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL                                  0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL                                  0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL                                    0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_DEFVAL                                   0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT                                    25
+#define CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_MASK                                     0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_DEFVAL                                 0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_SHIFT                                  16
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_MASK                                   0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_DEFVAL                                 0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_SHIFT                                  8
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_MASK                                   0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL. (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_DEFVAL                                   0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_SHIFT                                    0
+#define CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_MASK                                     0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_QSPI_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_QSPI_REF_CTRL_CLKACT_DEFVAL                                        0x01000800
+#define CRL_APB_QSPI_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_QSPI_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR1_DEFVAL                                      0x01000800
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000800
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_QSPI_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_QSPI_REF_CTRL_SRCSEL_DEFVAL                                        0x01000800
+#define CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SDIO1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_CLKACT_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_SDIO1_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR1_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR0_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SDIO1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_SRCSEL_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_SDIO1_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*MIO pad selection for sdio1_rx_clk (feedback clock from the PAD) 0: MIO [51] 1: MIO [76]*/
+#undef IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_DEFVAL 
+#undef IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT 
+#undef IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK 
+#define IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_DEFVAL                             0x00000000
+#define IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT                              17
+#define IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK                               0x00020000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_UART0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_UART0_REF_CTRL_CLKACT_DEFVAL                                       0x01001800
+#define CRL_APB_UART0_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_UART0_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_UART0_REF_CTRL_DIVISOR1_DEFVAL                                     0x01001800
+#define CRL_APB_UART0_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_UART0_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_UART0_REF_CTRL_DIVISOR0_DEFVAL                                     0x01001800
+#define CRL_APB_UART0_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_UART0_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_UART0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_UART0_REF_CTRL_SRCSEL_DEFVAL                                       0x01001800
+#define CRL_APB_UART0_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_UART0_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_UART1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_UART1_REF_CTRL_CLKACT_DEFVAL                                       0x01001800
+#define CRL_APB_UART1_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_UART1_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_UART1_REF_CTRL_DIVISOR1_DEFVAL                                     0x01001800
+#define CRL_APB_UART1_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_UART1_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_UART1_REF_CTRL_DIVISOR0_DEFVAL                                     0x01001800
+#define CRL_APB_UART1_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_UART1_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_UART1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_UART1_REF_CTRL_SRCSEL_DEFVAL                                       0x01001800
+#define CRL_APB_UART1_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_UART1_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_I2C0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_I2C0_REF_CTRL_CLKACT_DEFVAL                                        0x01000500
+#define CRL_APB_I2C0_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_I2C0_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR1_DEFVAL                                      0x01000500
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000500
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_I2C0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_I2C0_REF_CTRL_SRCSEL_DEFVAL                                        0x01000500
+#define CRL_APB_I2C0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_I2C0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_I2C1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_I2C1_REF_CTRL_CLKACT_DEFVAL                                        0x01000500
+#define CRL_APB_I2C1_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_I2C1_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR1_DEFVAL                                      0x01000500
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000500
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_I2C1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_I2C1_REF_CTRL_SRCSEL_DEFVAL                                        0x01000500
+#define CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_SPI0_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_SPI1_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_CAN0_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_CAN1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_CAN1_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_CAN1_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CAN1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_CAN1_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_CAN1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_CAN1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Turing this off will shut down the OCM, some parts of the APM, and prevent transactions going from the FPD to the LPD and cou
+		d lead to system hang*/
+#undef CRL_APB_CPU_R5_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CPU_R5_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CPU_R5_CTRL_CLKACT_MASK 
+#define CRL_APB_CPU_R5_CTRL_CLKACT_DEFVAL                                          0x03000600
+#define CRL_APB_CPU_R5_CTRL_CLKACT_SHIFT                                           24
+#define CRL_APB_CPU_R5_CTRL_CLKACT_MASK                                            0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CPU_R5_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CPU_R5_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CPU_R5_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CPU_R5_CTRL_DIVISOR0_DEFVAL                                        0x03000600
+#define CRL_APB_CPU_R5_CTRL_DIVISOR0_SHIFT                                         8
+#define CRL_APB_CPU_R5_CTRL_DIVISOR0_MASK                                          0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CPU_R5_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CPU_R5_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CPU_R5_CTRL_SRCSEL_MASK 
+#define CRL_APB_CPU_R5_CTRL_SRCSEL_DEFVAL                                          0x03000600
+#define CRL_APB_CPU_R5_CTRL_SRCSEL_SHIFT                                           0
+#define CRL_APB_CPU_R5_CTRL_SRCSEL_MASK                                            0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_IOU_SWITCH_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_IOU_SWITCH_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_IOU_SWITCH_CTRL_CLKACT_MASK 
+#define CRL_APB_IOU_SWITCH_CTRL_CLKACT_DEFVAL                                      0x00001500
+#define CRL_APB_IOU_SWITCH_CTRL_CLKACT_SHIFT                                       24
+#define CRL_APB_IOU_SWITCH_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_MASK 
+#define CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_DEFVAL                                    0x00001500
+#define CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_SHIFT                                     8
+#define CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_IOU_SWITCH_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK 
+#define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_DEFVAL                                      0x00001500
+#define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT                                       0
+#define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CSU_PLL_CTRL_CLKACT_MASK 
+#define CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL                                         0x01001500
+#define CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_CSU_PLL_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL                                       0x01001500
+#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK 
+#define CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL                                         0x01001500
+#define CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PCAP_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PCAP_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PCAP_CTRL_CLKACT_MASK 
+#define CRL_APB_PCAP_CTRL_CLKACT_DEFVAL                                            0x00001500
+#define CRL_APB_PCAP_CTRL_CLKACT_SHIFT                                             24
+#define CRL_APB_PCAP_CTRL_CLKACT_MASK                                              0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PCAP_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PCAP_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PCAP_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PCAP_CTRL_DIVISOR0_DEFVAL                                          0x00001500
+#define CRL_APB_PCAP_CTRL_DIVISOR0_SHIFT                                           8
+#define CRL_APB_PCAP_CTRL_DIVISOR0_MASK                                            0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PCAP_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PCAP_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PCAP_CTRL_SRCSEL_MASK 
+#define CRL_APB_PCAP_CTRL_SRCSEL_DEFVAL                                            0x00001500
+#define CRL_APB_PCAP_CTRL_SRCSEL_SHIFT                                             0
+#define CRL_APB_PCAP_CTRL_SRCSEL_MASK                                              0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_LPD_SWITCH_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_LPD_SWITCH_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_LPD_SWITCH_CTRL_CLKACT_MASK 
+#define CRL_APB_LPD_SWITCH_CTRL_CLKACT_DEFVAL                                      0x01000500
+#define CRL_APB_LPD_SWITCH_CTRL_CLKACT_SHIFT                                       24
+#define CRL_APB_LPD_SWITCH_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_MASK 
+#define CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_DEFVAL                                    0x01000500
+#define CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_SHIFT                                     8
+#define CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_LPD_SWITCH_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_LPD_SWITCH_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_LPD_SWITCH_CTRL_SRCSEL_MASK 
+#define CRL_APB_LPD_SWITCH_CTRL_SRCSEL_DEFVAL                                      0x01000500
+#define CRL_APB_LPD_SWITCH_CTRL_SRCSEL_SHIFT                                       0
+#define CRL_APB_LPD_SWITCH_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_LPD_LSBUS_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_LPD_LSBUS_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_LPD_LSBUS_CTRL_CLKACT_MASK 
+#define CRL_APB_LPD_LSBUS_CTRL_CLKACT_DEFVAL                                       0x01001800
+#define CRL_APB_LPD_LSBUS_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_LPD_LSBUS_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_MASK 
+#define CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_DEFVAL                                     0x01001800
+#define CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_LPD_LSBUS_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_LPD_LSBUS_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_LPD_LSBUS_CTRL_SRCSEL_MASK 
+#define CRL_APB_LPD_LSBUS_CTRL_SRCSEL_DEFVAL                                       0x01001800
+#define CRL_APB_LPD_LSBUS_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_LPD_LSBUS_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_DBG_LPD_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_DBG_LPD_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_DBG_LPD_CTRL_CLKACT_MASK 
+#define CRL_APB_DBG_LPD_CTRL_CLKACT_DEFVAL                                         0x01002000
+#define CRL_APB_DBG_LPD_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_DBG_LPD_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_DBG_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_DBG_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_DBG_LPD_CTRL_DIVISOR0_MASK 
+#define CRL_APB_DBG_LPD_CTRL_DIVISOR0_DEFVAL                                       0x01002000
+#define CRL_APB_DBG_LPD_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_DBG_LPD_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_DBG_LPD_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK 
+#define CRL_APB_DBG_LPD_CTRL_SRCSEL_DEFVAL                                         0x01002000
+#define CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL                                        0x00052000
+#define CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_NAND_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL                                      0x00052000
+#define CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL                                      0x00052000
+#define CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL                                        0x00052000
+#define CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_NAND_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_ADMA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_ADMA_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_ADMA_REF_CTRL_CLKACT_DEFVAL                                        0x00002000
+#define CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_ADMA_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_ADMA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_ADMA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_ADMA_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_ADMA_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002000
+#define CRL_APB_ADMA_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_ADMA_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_ADMA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_ADMA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_ADMA_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_ADMA_REF_CTRL_SRCSEL_DEFVAL                                        0x00002000
+#define CRL_APB_ADMA_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_ADMA_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL0_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL0_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL0_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL0_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL0_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL0_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL0_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL0_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL0_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL0_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL0_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL0_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL1_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL1_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL1_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL1_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL1_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL1_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL1_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL1_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL1_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL1_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL1_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL1_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL2_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL2_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL2_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL2_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL2_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL2_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL2_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL2_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL2_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL2_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL2_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL2_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL2_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL2_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL3_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL3_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL3_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL3_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL3_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL3_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL3_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL3_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL3_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL3_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL3_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL3_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL3_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL3_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_AMS_REF_CTRL_DIVISOR1_DEFVAL                                       0x01001800
+#define CRL_APB_AMS_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_AMS_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_AMS_REF_CTRL_DIVISOR0_DEFVAL                                       0x01001800
+#define CRL_APB_AMS_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_AMS_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_AMS_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_AMS_REF_CTRL_SRCSEL_DEFVAL                                         0x01001800
+#define CRL_APB_AMS_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_AMS_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_AMS_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_AMS_REF_CTRL_CLKACT_DEFVAL                                         0x01001800
+#define CRL_APB_AMS_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_AMS_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*000 = IOPLL; 001 = RPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This
+		is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_DLL_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_DLL_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_DLL_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_DLL_REF_CTRL_SRCSEL_DEFVAL                                         0x00000000
+#define CRL_APB_DLL_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_DLL_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_DEFVAL                                 0x00001800
+#define CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_SHIFT                                  8
+#define CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_MASK                                   0x00003F00U
+
+/*1XX = pss_ref_clk; 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 
+		 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_DEFVAL                                   0x00001800
+#define CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_SHIFT                                    0
+#define CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_MASK                                     0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_DEFVAL                                   0x00001800
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_SHIFT                                    24
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_MASK                                     0x01000000U
+
+/*000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_SATA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_SATA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_SATA_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_SATA_REF_CTRL_SRCSEL_DEFVAL                                        0x01001600
+#define CRF_APB_SATA_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRF_APB_SATA_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_SATA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_SATA_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_SATA_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_SATA_REF_CTRL_CLKACT_DEFVAL                                        0x01001600
+#define CRF_APB_SATA_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRF_APB_SATA_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_SATA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_SATA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_SATA_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_SATA_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001600
+#define CRF_APB_SATA_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRF_APB_SATA_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = RPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cyc
+		es of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_PCIE_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_PCIE_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_PCIE_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_PCIE_REF_CTRL_SRCSEL_DEFVAL                                        0x00001500
+#define CRF_APB_PCIE_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRF_APB_PCIE_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_PCIE_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_PCIE_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_PCIE_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_PCIE_REF_CTRL_CLKACT_DEFVAL                                        0x00001500
+#define CRF_APB_PCIE_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRF_APB_PCIE_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_PCIE_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_PCIE_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_PCIE_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_PCIE_REF_CTRL_DIVISOR0_DEFVAL                                      0x00001500
+#define CRF_APB_PCIE_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRF_APB_PCIE_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_DEFVAL                                  0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_DEFVAL                                  0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_DEFVAL                                    0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_DEFVAL                                    0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_SHIFT                                     24
+#define CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_MASK                                      0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_DEFVAL                                  0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_DEFVAL                                  0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_DEFVAL                                    0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_DEFVAL                                    0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_SHIFT                                     24
+#define CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_MASK                                      0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR1_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR1_DEFVAL                                    0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR1_SHIFT                                     16
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR1_MASK                                      0x003F0000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR0_DEFVAL                                    0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR0_SHIFT                                     8
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of t
+		e new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DP_STC_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_SRCSEL_DEFVAL                                      0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_SRCSEL_SHIFT                                       0
+#define CRF_APB_DP_STC_REF_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DP_STC_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_CLKACT_DEFVAL                                      0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_CLKACT_SHIFT                                       24
+#define CRF_APB_DP_STC_REF_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_ACPU_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_ACPU_CTRL_DIVISOR0_MASK 
+#define CRF_APB_ACPU_CTRL_DIVISOR0_DEFVAL                                          0x03000400
+#define CRF_APB_ACPU_CTRL_DIVISOR0_SHIFT                                           8
+#define CRF_APB_ACPU_CTRL_DIVISOR0_MASK                                            0x00003F00U
+
+/*000 = APLL; 010 = DPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_ACPU_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_ACPU_CTRL_SRCSEL_MASK 
+#define CRF_APB_ACPU_CTRL_SRCSEL_DEFVAL                                            0x03000400
+#define CRF_APB_ACPU_CTRL_SRCSEL_SHIFT                                             0
+#define CRF_APB_ACPU_CTRL_SRCSEL_MASK                                              0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock. For the half speed APU Clock*/
+#undef CRF_APB_ACPU_CTRL_CLKACT_HALF_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_CLKACT_HALF_SHIFT 
+#undef CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK 
+#define CRF_APB_ACPU_CTRL_CLKACT_HALF_DEFVAL                                       0x03000400
+#define CRF_APB_ACPU_CTRL_CLKACT_HALF_SHIFT                                        25
+#define CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK                                         0x02000000U
+
+/*Clock active signal. Switch to 0 to disable the clock. For the full speed ACPUX Clock. This will shut off the high speed cloc
+		 to the entire APU*/
+#undef CRF_APB_ACPU_CTRL_CLKACT_FULL_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_CLKACT_FULL_SHIFT 
+#undef CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK 
+#define CRF_APB_ACPU_CTRL_CLKACT_FULL_DEFVAL                                       0x03000400
+#define CRF_APB_ACPU_CTRL_CLKACT_FULL_SHIFT                                        24
+#define CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DBG_TRACE_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DBG_TRACE_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DBG_TRACE_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DBG_TRACE_CTRL_DIVISOR0_DEFVAL                                     0x00002500
+#define CRF_APB_DBG_TRACE_CTRL_DIVISOR0_SHIFT                                      8
+#define CRF_APB_DBG_TRACE_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DBG_TRACE_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DBG_TRACE_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DBG_TRACE_CTRL_SRCSEL_MASK 
+#define CRF_APB_DBG_TRACE_CTRL_SRCSEL_DEFVAL                                       0x00002500
+#define CRF_APB_DBG_TRACE_CTRL_SRCSEL_SHIFT                                        0
+#define CRF_APB_DBG_TRACE_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DBG_TRACE_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DBG_TRACE_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DBG_TRACE_CTRL_CLKACT_MASK 
+#define CRF_APB_DBG_TRACE_CTRL_CLKACT_DEFVAL                                       0x00002500
+#define CRF_APB_DBG_TRACE_CTRL_CLKACT_SHIFT                                        24
+#define CRF_APB_DBG_TRACE_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DBG_FPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DBG_FPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DBG_FPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DBG_FPD_CTRL_DIVISOR0_DEFVAL                                       0x01002500
+#define CRF_APB_DBG_FPD_CTRL_DIVISOR0_SHIFT                                        8
+#define CRF_APB_DBG_FPD_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DBG_FPD_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DBG_FPD_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DBG_FPD_CTRL_SRCSEL_MASK 
+#define CRF_APB_DBG_FPD_CTRL_SRCSEL_DEFVAL                                         0x01002500
+#define CRF_APB_DBG_FPD_CTRL_SRCSEL_SHIFT                                          0
+#define CRF_APB_DBG_FPD_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DBG_FPD_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DBG_FPD_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DBG_FPD_CTRL_CLKACT_MASK 
+#define CRF_APB_DBG_FPD_CTRL_CLKACT_DEFVAL                                         0x01002500
+#define CRF_APB_DBG_FPD_CTRL_CLKACT_SHIFT                                          24
+#define CRF_APB_DBG_FPD_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DDR_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DDR_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DDR_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DDR_CTRL_DIVISOR0_DEFVAL                                           0x01000500
+#define CRF_APB_DDR_CTRL_DIVISOR0_SHIFT                                            8
+#define CRF_APB_DDR_CTRL_DIVISOR0_MASK                                             0x00003F00U
+
+/*000 = DPLL; 001 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This 
+		s not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DDR_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DDR_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DDR_CTRL_SRCSEL_MASK 
+#define CRF_APB_DDR_CTRL_SRCSEL_DEFVAL                                             0x01000500
+#define CRF_APB_DDR_CTRL_SRCSEL_SHIFT                                              0
+#define CRF_APB_DDR_CTRL_SRCSEL_MASK                                               0x00000007U
+
+/*6 bit divider*/
+#undef CRF_APB_GPU_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_GPU_REF_CTRL_DIVISOR0_DEFVAL                                       0x00001500
+#define CRF_APB_GPU_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRF_APB_GPU_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_GPU_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_GPU_REF_CTRL_SRCSEL_DEFVAL                                         0x00001500
+#define CRF_APB_GPU_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRF_APB_GPU_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock, which will stop clock for GPU (and both Pixel Processors).*/
+#undef CRF_APB_GPU_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_GPU_REF_CTRL_CLKACT_DEFVAL                                         0x00001500
+#define CRF_APB_GPU_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRF_APB_GPU_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor*/
+#undef CRF_APB_GPU_REF_CTRL_PP0_CLKACT_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_PP0_CLKACT_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_PP0_CLKACT_MASK 
+#define CRF_APB_GPU_REF_CTRL_PP0_CLKACT_DEFVAL                                     0x00001500
+#define CRF_APB_GPU_REF_CTRL_PP0_CLKACT_SHIFT                                      25
+#define CRF_APB_GPU_REF_CTRL_PP0_CLKACT_MASK                                       0x02000000U
+
+/*Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor*/
+#undef CRF_APB_GPU_REF_CTRL_PP1_CLKACT_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_PP1_CLKACT_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_PP1_CLKACT_MASK 
+#define CRF_APB_GPU_REF_CTRL_PP1_CLKACT_DEFVAL                                     0x00001500
+#define CRF_APB_GPU_REF_CTRL_PP1_CLKACT_SHIFT                                      26
+#define CRF_APB_GPU_REF_CTRL_PP1_CLKACT_MASK                                       0x04000000U
+
+/*6 bit divider*/
+#undef CRF_APB_GDMA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_GDMA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_GDMA_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_GDMA_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000500
+#define CRF_APB_GDMA_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRF_APB_GDMA_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_GDMA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_GDMA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_GDMA_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_GDMA_REF_CTRL_SRCSEL_DEFVAL                                        0x01000500
+#define CRF_APB_GDMA_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRF_APB_GDMA_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_GDMA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_GDMA_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_GDMA_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_GDMA_REF_CTRL_CLKACT_DEFVAL                                        0x01000500
+#define CRF_APB_GDMA_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRF_APB_GDMA_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DPDMA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DPDMA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DPDMA_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DPDMA_REF_CTRL_DIVISOR0_DEFVAL                                     0x01000500
+#define CRF_APB_DPDMA_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRF_APB_DPDMA_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DPDMA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DPDMA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DPDMA_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DPDMA_REF_CTRL_SRCSEL_DEFVAL                                       0x01000500
+#define CRF_APB_DPDMA_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRF_APB_DPDMA_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DPDMA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DPDMA_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DPDMA_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DPDMA_REF_CTRL_CLKACT_DEFVAL                                       0x01000500
+#define CRF_APB_DPDMA_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRF_APB_DPDMA_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_MASK 
+#define CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_DEFVAL                                    0x01000400
+#define CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_SHIFT                                     8
+#define CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_MASK 
+#define CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_DEFVAL                                      0x01000400
+#define CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_SHIFT                                       0
+#define CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_TOPSW_MAIN_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_TOPSW_MAIN_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_TOPSW_MAIN_CTRL_CLKACT_MASK 
+#define CRF_APB_TOPSW_MAIN_CTRL_CLKACT_DEFVAL                                      0x01000400
+#define CRF_APB_TOPSW_MAIN_CTRL_CLKACT_SHIFT                                       24
+#define CRF_APB_TOPSW_MAIN_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_MASK 
+#define CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_DEFVAL                                   0x01000800
+#define CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*000 = APLL; 010 = IOPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_MASK 
+#define CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_DEFVAL                                     0x01000800
+#define CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_SHIFT                                      0
+#define CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_MASK                                       0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK 
+#define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_DEFVAL                                     0x01000800
+#define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT                                      24
+#define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK                                       0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL                                   0x00000800
+#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL                                     0x00000800
+#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT                                      0
+#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK                                       0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL                                     0x00000800
+#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT                                      24
+#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK                                       0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_DEFVAL                                     0x00000A00
+#define CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT                                      8
+#define CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DBG_TSTMP_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DBG_TSTMP_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DBG_TSTMP_CTRL_SRCSEL_MASK 
+#define CRF_APB_DBG_TSTMP_CTRL_SRCSEL_DEFVAL                                       0x00000A00
+#define CRF_APB_DBG_TSTMP_CTRL_SRCSEL_SHIFT                                        0
+#define CRF_APB_DBG_TSTMP_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*00" = Select the APB switch clock for the APB interface of TTC0'01" = Select the PLL ref clock for the APB interface of TTC0'
+		0" = Select the R5 clock for the APB interface of TTC0*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_SHIFT                                    0
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_MASK                                     0x00000003U
+
+/*00" = Select the APB switch clock for the APB interface of TTC1'01" = Select the PLL ref clock for the APB interface of TTC1'
+		0" = Select the R5 clock for the APB interface of TTC1*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_SHIFT                                    2
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_MASK                                     0x0000000CU
+
+/*00" = Select the APB switch clock for the APB interface of TTC2'01" = Select the PLL ref clock for the APB interface of TTC2'
+		0" = Select the R5 clock for the APB interface of TTC2*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_SHIFT                                    4
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_MASK                                     0x00000030U
+
+/*00" = Select the APB switch clock for the APB interface of TTC3'01" = Select the PLL ref clock for the APB interface of TTC3'
+		0" = Select the R5 clock for the APB interface of TTC3*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_SHIFT                                    6
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_MASK                                     0x000000C0U
+
+/*System watchdog timer clock source selection: 0: Internal APB clock 1: External (PL clock via EMIO or Pinout clock via MIO)*/
+#undef FPD_SLCR_WDT_CLK_SEL_SELECT_DEFVAL 
+#undef FPD_SLCR_WDT_CLK_SEL_SELECT_SHIFT 
+#undef FPD_SLCR_WDT_CLK_SEL_SELECT_MASK 
+#define FPD_SLCR_WDT_CLK_SEL_SELECT_DEFVAL                                         0x00000000
+#define FPD_SLCR_WDT_CLK_SEL_SELECT_SHIFT                                          0
+#define FPD_SLCR_WDT_CLK_SEL_SELECT_MASK                                           0x00000001U
+
+/*System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock from PL via EMIO, or from pinout 
+		ia MIO*/
+#undef IOU_SLCR_WDT_CLK_SEL_SELECT_DEFVAL 
+#undef IOU_SLCR_WDT_CLK_SEL_SELECT_SHIFT 
+#undef IOU_SLCR_WDT_CLK_SEL_SELECT_MASK 
+#define IOU_SLCR_WDT_CLK_SEL_SELECT_DEFVAL                                         0x00000000
+#define IOU_SLCR_WDT_CLK_SEL_SELECT_SHIFT                                          0
+#define IOU_SLCR_WDT_CLK_SEL_SELECT_MASK                                           0x00000001U
+
+/*System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock pss_ref_clk*/
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_DEFVAL 
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_SHIFT 
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_MASK 
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_DEFVAL                                  0x00000000
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_SHIFT                                   0
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_MASK                                    0x00000001U
+#undef CRF_APB_RST_DDR_SS_OFFSET 
+#define CRF_APB_RST_DDR_SS_OFFSET                                                  0XFD1A0108
+#undef DDRC_MSTR_OFFSET 
+#define DDRC_MSTR_OFFSET                                                           0XFD070000
+#undef DDRC_MRCTRL0_OFFSET 
+#define DDRC_MRCTRL0_OFFSET                                                        0XFD070010
+#undef DDRC_DERATEEN_OFFSET 
+#define DDRC_DERATEEN_OFFSET                                                       0XFD070020
+#undef DDRC_DERATEINT_OFFSET 
+#define DDRC_DERATEINT_OFFSET                                                      0XFD070024
+#undef DDRC_PWRCTL_OFFSET 
+#define DDRC_PWRCTL_OFFSET                                                         0XFD070030
+#undef DDRC_PWRTMG_OFFSET 
+#define DDRC_PWRTMG_OFFSET                                                         0XFD070034
+#undef DDRC_RFSHCTL0_OFFSET 
+#define DDRC_RFSHCTL0_OFFSET                                                       0XFD070050
+#undef DDRC_RFSHCTL3_OFFSET 
+#define DDRC_RFSHCTL3_OFFSET                                                       0XFD070060
+#undef DDRC_RFSHTMG_OFFSET 
+#define DDRC_RFSHTMG_OFFSET                                                        0XFD070064
+#undef DDRC_ECCCFG0_OFFSET 
+#define DDRC_ECCCFG0_OFFSET                                                        0XFD070070
+#undef DDRC_ECCCFG1_OFFSET 
+#define DDRC_ECCCFG1_OFFSET                                                        0XFD070074
+#undef DDRC_CRCPARCTL1_OFFSET 
+#define DDRC_CRCPARCTL1_OFFSET                                                     0XFD0700C4
+#undef DDRC_CRCPARCTL2_OFFSET 
+#define DDRC_CRCPARCTL2_OFFSET                                                     0XFD0700C8
+#undef DDRC_INIT0_OFFSET 
+#define DDRC_INIT0_OFFSET                                                          0XFD0700D0
+#undef DDRC_INIT1_OFFSET 
+#define DDRC_INIT1_OFFSET                                                          0XFD0700D4
+#undef DDRC_INIT2_OFFSET 
+#define DDRC_INIT2_OFFSET                                                          0XFD0700D8
+#undef DDRC_INIT3_OFFSET 
+#define DDRC_INIT3_OFFSET                                                          0XFD0700DC
+#undef DDRC_INIT4_OFFSET 
+#define DDRC_INIT4_OFFSET                                                          0XFD0700E0
+#undef DDRC_INIT5_OFFSET 
+#define DDRC_INIT5_OFFSET                                                          0XFD0700E4
+#undef DDRC_INIT6_OFFSET 
+#define DDRC_INIT6_OFFSET                                                          0XFD0700E8
+#undef DDRC_INIT7_OFFSET 
+#define DDRC_INIT7_OFFSET                                                          0XFD0700EC
+#undef DDRC_DIMMCTL_OFFSET 
+#define DDRC_DIMMCTL_OFFSET                                                        0XFD0700F0
+#undef DDRC_RANKCTL_OFFSET 
+#define DDRC_RANKCTL_OFFSET                                                        0XFD0700F4
+#undef DDRC_DRAMTMG0_OFFSET 
+#define DDRC_DRAMTMG0_OFFSET                                                       0XFD070100
+#undef DDRC_DRAMTMG1_OFFSET 
+#define DDRC_DRAMTMG1_OFFSET                                                       0XFD070104
+#undef DDRC_DRAMTMG2_OFFSET 
+#define DDRC_DRAMTMG2_OFFSET                                                       0XFD070108
+#undef DDRC_DRAMTMG3_OFFSET 
+#define DDRC_DRAMTMG3_OFFSET                                                       0XFD07010C
+#undef DDRC_DRAMTMG4_OFFSET 
+#define DDRC_DRAMTMG4_OFFSET                                                       0XFD070110
+#undef DDRC_DRAMTMG5_OFFSET 
+#define DDRC_DRAMTMG5_OFFSET                                                       0XFD070114
+#undef DDRC_DRAMTMG6_OFFSET 
+#define DDRC_DRAMTMG6_OFFSET                                                       0XFD070118
+#undef DDRC_DRAMTMG7_OFFSET 
+#define DDRC_DRAMTMG7_OFFSET                                                       0XFD07011C
+#undef DDRC_DRAMTMG8_OFFSET 
+#define DDRC_DRAMTMG8_OFFSET                                                       0XFD070120
+#undef DDRC_DRAMTMG9_OFFSET 
+#define DDRC_DRAMTMG9_OFFSET                                                       0XFD070124
+#undef DDRC_DRAMTMG11_OFFSET 
+#define DDRC_DRAMTMG11_OFFSET                                                      0XFD07012C
+#undef DDRC_DRAMTMG12_OFFSET 
+#define DDRC_DRAMTMG12_OFFSET                                                      0XFD070130
+#undef DDRC_ZQCTL0_OFFSET 
+#define DDRC_ZQCTL0_OFFSET                                                         0XFD070180
+#undef DDRC_ZQCTL1_OFFSET 
+#define DDRC_ZQCTL1_OFFSET                                                         0XFD070184
+#undef DDRC_DFITMG0_OFFSET 
+#define DDRC_DFITMG0_OFFSET                                                        0XFD070190
+#undef DDRC_DFITMG1_OFFSET 
+#define DDRC_DFITMG1_OFFSET                                                        0XFD070194
+#undef DDRC_DFILPCFG0_OFFSET 
+#define DDRC_DFILPCFG0_OFFSET                                                      0XFD070198
+#undef DDRC_DFILPCFG1_OFFSET 
+#define DDRC_DFILPCFG1_OFFSET                                                      0XFD07019C
+#undef DDRC_DFIUPD1_OFFSET 
+#define DDRC_DFIUPD1_OFFSET                                                        0XFD0701A4
+#undef DDRC_DFIMISC_OFFSET 
+#define DDRC_DFIMISC_OFFSET                                                        0XFD0701B0
+#undef DDRC_DFITMG2_OFFSET 
+#define DDRC_DFITMG2_OFFSET                                                        0XFD0701B4
+#undef DDRC_DBICTL_OFFSET 
+#define DDRC_DBICTL_OFFSET                                                         0XFD0701C0
+#undef DDRC_ADDRMAP0_OFFSET 
+#define DDRC_ADDRMAP0_OFFSET                                                       0XFD070200
+#undef DDRC_ADDRMAP1_OFFSET 
+#define DDRC_ADDRMAP1_OFFSET                                                       0XFD070204
+#undef DDRC_ADDRMAP2_OFFSET 
+#define DDRC_ADDRMAP2_OFFSET                                                       0XFD070208
+#undef DDRC_ADDRMAP3_OFFSET 
+#define DDRC_ADDRMAP3_OFFSET                                                       0XFD07020C
+#undef DDRC_ADDRMAP4_OFFSET 
+#define DDRC_ADDRMAP4_OFFSET                                                       0XFD070210
+#undef DDRC_ADDRMAP5_OFFSET 
+#define DDRC_ADDRMAP5_OFFSET                                                       0XFD070214
+#undef DDRC_ADDRMAP6_OFFSET 
+#define DDRC_ADDRMAP6_OFFSET                                                       0XFD070218
+#undef DDRC_ADDRMAP7_OFFSET 
+#define DDRC_ADDRMAP7_OFFSET                                                       0XFD07021C
+#undef DDRC_ADDRMAP8_OFFSET 
+#define DDRC_ADDRMAP8_OFFSET                                                       0XFD070220
+#undef DDRC_ADDRMAP9_OFFSET 
+#define DDRC_ADDRMAP9_OFFSET                                                       0XFD070224
+#undef DDRC_ADDRMAP10_OFFSET 
+#define DDRC_ADDRMAP10_OFFSET                                                      0XFD070228
+#undef DDRC_ADDRMAP11_OFFSET 
+#define DDRC_ADDRMAP11_OFFSET                                                      0XFD07022C
+#undef DDRC_ODTCFG_OFFSET 
+#define DDRC_ODTCFG_OFFSET                                                         0XFD070240
+#undef DDRC_ODTMAP_OFFSET 
+#define DDRC_ODTMAP_OFFSET                                                         0XFD070244
+#undef DDRC_SCHED_OFFSET 
+#define DDRC_SCHED_OFFSET                                                          0XFD070250
+#undef DDRC_PERFLPR1_OFFSET 
+#define DDRC_PERFLPR1_OFFSET                                                       0XFD070264
+#undef DDRC_PERFWR1_OFFSET 
+#define DDRC_PERFWR1_OFFSET                                                        0XFD07026C
+#undef DDRC_DQMAP5_OFFSET 
+#define DDRC_DQMAP5_OFFSET                                                         0XFD070294
+#undef DDRC_DBG0_OFFSET 
+#define DDRC_DBG0_OFFSET                                                           0XFD070300
+#undef DDRC_DBGCMD_OFFSET 
+#define DDRC_DBGCMD_OFFSET                                                         0XFD07030C
+#undef DDRC_SWCTL_OFFSET 
+#define DDRC_SWCTL_OFFSET                                                          0XFD070320
+#undef DDRC_PCCFG_OFFSET 
+#define DDRC_PCCFG_OFFSET                                                          0XFD070400
+#undef DDRC_PCFGR_0_OFFSET 
+#define DDRC_PCFGR_0_OFFSET                                                        0XFD070404
+#undef DDRC_PCFGW_0_OFFSET 
+#define DDRC_PCFGW_0_OFFSET                                                        0XFD070408
+#undef DDRC_PCTRL_0_OFFSET 
+#define DDRC_PCTRL_0_OFFSET                                                        0XFD070490
+#undef DDRC_PCFGQOS0_0_OFFSET 
+#define DDRC_PCFGQOS0_0_OFFSET                                                     0XFD070494
+#undef DDRC_PCFGQOS1_0_OFFSET 
+#define DDRC_PCFGQOS1_0_OFFSET                                                     0XFD070498
+#undef DDRC_PCFGR_1_OFFSET 
+#define DDRC_PCFGR_1_OFFSET                                                        0XFD0704B4
+#undef DDRC_PCFGW_1_OFFSET 
+#define DDRC_PCFGW_1_OFFSET                                                        0XFD0704B8
+#undef DDRC_PCTRL_1_OFFSET 
+#define DDRC_PCTRL_1_OFFSET                                                        0XFD070540
+#undef DDRC_PCFGQOS0_1_OFFSET 
+#define DDRC_PCFGQOS0_1_OFFSET                                                     0XFD070544
+#undef DDRC_PCFGQOS1_1_OFFSET 
+#define DDRC_PCFGQOS1_1_OFFSET                                                     0XFD070548
+#undef DDRC_PCFGR_2_OFFSET 
+#define DDRC_PCFGR_2_OFFSET                                                        0XFD070564
+#undef DDRC_PCFGW_2_OFFSET 
+#define DDRC_PCFGW_2_OFFSET                                                        0XFD070568
+#undef DDRC_PCTRL_2_OFFSET 
+#define DDRC_PCTRL_2_OFFSET                                                        0XFD0705F0
+#undef DDRC_PCFGQOS0_2_OFFSET 
+#define DDRC_PCFGQOS0_2_OFFSET                                                     0XFD0705F4
+#undef DDRC_PCFGQOS1_2_OFFSET 
+#define DDRC_PCFGQOS1_2_OFFSET                                                     0XFD0705F8
+#undef DDRC_PCFGR_3_OFFSET 
+#define DDRC_PCFGR_3_OFFSET                                                        0XFD070614
+#undef DDRC_PCFGW_3_OFFSET 
+#define DDRC_PCFGW_3_OFFSET                                                        0XFD070618
+#undef DDRC_PCTRL_3_OFFSET 
+#define DDRC_PCTRL_3_OFFSET                                                        0XFD0706A0
+#undef DDRC_PCFGQOS0_3_OFFSET 
+#define DDRC_PCFGQOS0_3_OFFSET                                                     0XFD0706A4
+#undef DDRC_PCFGQOS1_3_OFFSET 
+#define DDRC_PCFGQOS1_3_OFFSET                                                     0XFD0706A8
+#undef DDRC_PCFGWQOS0_3_OFFSET 
+#define DDRC_PCFGWQOS0_3_OFFSET                                                    0XFD0706AC
+#undef DDRC_PCFGWQOS1_3_OFFSET 
+#define DDRC_PCFGWQOS1_3_OFFSET                                                    0XFD0706B0
+#undef DDRC_PCFGR_4_OFFSET 
+#define DDRC_PCFGR_4_OFFSET                                                        0XFD0706C4
+#undef DDRC_PCFGW_4_OFFSET 
+#define DDRC_PCFGW_4_OFFSET                                                        0XFD0706C8
+#undef DDRC_PCTRL_4_OFFSET 
+#define DDRC_PCTRL_4_OFFSET                                                        0XFD070750
+#undef DDRC_PCFGQOS0_4_OFFSET 
+#define DDRC_PCFGQOS0_4_OFFSET                                                     0XFD070754
+#undef DDRC_PCFGQOS1_4_OFFSET 
+#define DDRC_PCFGQOS1_4_OFFSET                                                     0XFD070758
+#undef DDRC_PCFGWQOS0_4_OFFSET 
+#define DDRC_PCFGWQOS0_4_OFFSET                                                    0XFD07075C
+#undef DDRC_PCFGWQOS1_4_OFFSET 
+#define DDRC_PCFGWQOS1_4_OFFSET                                                    0XFD070760
+#undef DDRC_PCFGR_5_OFFSET 
+#define DDRC_PCFGR_5_OFFSET                                                        0XFD070774
+#undef DDRC_PCFGW_5_OFFSET 
+#define DDRC_PCFGW_5_OFFSET                                                        0XFD070778
+#undef DDRC_PCTRL_5_OFFSET 
+#define DDRC_PCTRL_5_OFFSET                                                        0XFD070800
+#undef DDRC_PCFGQOS0_5_OFFSET 
+#define DDRC_PCFGQOS0_5_OFFSET                                                     0XFD070804
+#undef DDRC_PCFGQOS1_5_OFFSET 
+#define DDRC_PCFGQOS1_5_OFFSET                                                     0XFD070808
+#undef DDRC_PCFGWQOS0_5_OFFSET 
+#define DDRC_PCFGWQOS0_5_OFFSET                                                    0XFD07080C
+#undef DDRC_PCFGWQOS1_5_OFFSET 
+#define DDRC_PCFGWQOS1_5_OFFSET                                                    0XFD070810
+#undef DDRC_SARBASE0_OFFSET 
+#define DDRC_SARBASE0_OFFSET                                                       0XFD070F04
+#undef DDRC_SARSIZE0_OFFSET 
+#define DDRC_SARSIZE0_OFFSET                                                       0XFD070F08
+#undef DDRC_SARBASE1_OFFSET 
+#define DDRC_SARBASE1_OFFSET                                                       0XFD070F0C
+#undef DDRC_SARSIZE1_OFFSET 
+#define DDRC_SARSIZE1_OFFSET                                                       0XFD070F10
+#undef DDRC_DFITMG0_SHADOW_OFFSET 
+#define DDRC_DFITMG0_SHADOW_OFFSET                                                 0XFD072190
+#undef CRF_APB_RST_DDR_SS_OFFSET 
+#define CRF_APB_RST_DDR_SS_OFFSET                                                  0XFD1A0108
+#undef DDR_PHY_PGCR0_OFFSET 
+#define DDR_PHY_PGCR0_OFFSET                                                       0XFD080010
+#undef DDR_PHY_PGCR2_OFFSET 
+#define DDR_PHY_PGCR2_OFFSET                                                       0XFD080018
+#undef DDR_PHY_PGCR5_OFFSET 
+#define DDR_PHY_PGCR5_OFFSET                                                       0XFD080024
+#undef DDR_PHY_PTR0_OFFSET 
+#define DDR_PHY_PTR0_OFFSET                                                        0XFD080040
+#undef DDR_PHY_PTR1_OFFSET 
+#define DDR_PHY_PTR1_OFFSET                                                        0XFD080044
+#undef DDR_PHY_DSGCR_OFFSET 
+#define DDR_PHY_DSGCR_OFFSET                                                       0XFD080090
+#undef DDR_PHY_DCR_OFFSET 
+#define DDR_PHY_DCR_OFFSET                                                         0XFD080100
+#undef DDR_PHY_DTPR0_OFFSET 
+#define DDR_PHY_DTPR0_OFFSET                                                       0XFD080110
+#undef DDR_PHY_DTPR1_OFFSET 
+#define DDR_PHY_DTPR1_OFFSET                                                       0XFD080114
+#undef DDR_PHY_DTPR2_OFFSET 
+#define DDR_PHY_DTPR2_OFFSET                                                       0XFD080118
+#undef DDR_PHY_DTPR3_OFFSET 
+#define DDR_PHY_DTPR3_OFFSET                                                       0XFD08011C
+#undef DDR_PHY_DTPR4_OFFSET 
+#define DDR_PHY_DTPR4_OFFSET                                                       0XFD080120
+#undef DDR_PHY_DTPR5_OFFSET 
+#define DDR_PHY_DTPR5_OFFSET                                                       0XFD080124
+#undef DDR_PHY_DTPR6_OFFSET 
+#define DDR_PHY_DTPR6_OFFSET                                                       0XFD080128
+#undef DDR_PHY_RDIMMGCR0_OFFSET 
+#define DDR_PHY_RDIMMGCR0_OFFSET                                                   0XFD080140
+#undef DDR_PHY_RDIMMGCR1_OFFSET 
+#define DDR_PHY_RDIMMGCR1_OFFSET                                                   0XFD080144
+#undef DDR_PHY_RDIMMCR1_OFFSET 
+#define DDR_PHY_RDIMMCR1_OFFSET                                                    0XFD080154
+#undef DDR_PHY_MR0_OFFSET 
+#define DDR_PHY_MR0_OFFSET                                                         0XFD080180
+#undef DDR_PHY_MR1_OFFSET 
+#define DDR_PHY_MR1_OFFSET                                                         0XFD080184
+#undef DDR_PHY_MR2_OFFSET 
+#define DDR_PHY_MR2_OFFSET                                                         0XFD080188
+#undef DDR_PHY_MR3_OFFSET 
+#define DDR_PHY_MR3_OFFSET                                                         0XFD08018C
+#undef DDR_PHY_MR4_OFFSET 
+#define DDR_PHY_MR4_OFFSET                                                         0XFD080190
+#undef DDR_PHY_MR5_OFFSET 
+#define DDR_PHY_MR5_OFFSET                                                         0XFD080194
+#undef DDR_PHY_MR6_OFFSET 
+#define DDR_PHY_MR6_OFFSET                                                         0XFD080198
+#undef DDR_PHY_MR11_OFFSET 
+#define DDR_PHY_MR11_OFFSET                                                        0XFD0801AC
+#undef DDR_PHY_MR12_OFFSET 
+#define DDR_PHY_MR12_OFFSET                                                        0XFD0801B0
+#undef DDR_PHY_MR13_OFFSET 
+#define DDR_PHY_MR13_OFFSET                                                        0XFD0801B4
+#undef DDR_PHY_MR14_OFFSET 
+#define DDR_PHY_MR14_OFFSET                                                        0XFD0801B8
+#undef DDR_PHY_MR22_OFFSET 
+#define DDR_PHY_MR22_OFFSET                                                        0XFD0801D8
+#undef DDR_PHY_DTCR0_OFFSET 
+#define DDR_PHY_DTCR0_OFFSET                                                       0XFD080200
+#undef DDR_PHY_DTCR1_OFFSET 
+#define DDR_PHY_DTCR1_OFFSET                                                       0XFD080204
+#undef DDR_PHY_CATR0_OFFSET 
+#define DDR_PHY_CATR0_OFFSET                                                       0XFD080240
+#undef DDR_PHY_RIOCR5_OFFSET 
+#define DDR_PHY_RIOCR5_OFFSET                                                      0XFD0804F4
+#undef DDR_PHY_ACIOCR0_OFFSET 
+#define DDR_PHY_ACIOCR0_OFFSET                                                     0XFD080500
+#undef DDR_PHY_ACIOCR2_OFFSET 
+#define DDR_PHY_ACIOCR2_OFFSET                                                     0XFD080508
+#undef DDR_PHY_ACIOCR3_OFFSET 
+#define DDR_PHY_ACIOCR3_OFFSET                                                     0XFD08050C
+#undef DDR_PHY_ACIOCR4_OFFSET 
+#define DDR_PHY_ACIOCR4_OFFSET                                                     0XFD080510
+#undef DDR_PHY_IOVCR0_OFFSET 
+#define DDR_PHY_IOVCR0_OFFSET                                                      0XFD080520
+#undef DDR_PHY_VTCR0_OFFSET 
+#define DDR_PHY_VTCR0_OFFSET                                                       0XFD080528
+#undef DDR_PHY_VTCR1_OFFSET 
+#define DDR_PHY_VTCR1_OFFSET                                                       0XFD08052C
+#undef DDR_PHY_ACBDLR6_OFFSET 
+#define DDR_PHY_ACBDLR6_OFFSET                                                     0XFD080558
+#undef DDR_PHY_ACBDLR7_OFFSET 
+#define DDR_PHY_ACBDLR7_OFFSET                                                     0XFD08055C
+#undef DDR_PHY_ACBDLR8_OFFSET 
+#define DDR_PHY_ACBDLR8_OFFSET                                                     0XFD080560
+#undef DDR_PHY_ZQCR_OFFSET 
+#define DDR_PHY_ZQCR_OFFSET                                                        0XFD080680
+#undef DDR_PHY_ZQ0PR0_OFFSET 
+#define DDR_PHY_ZQ0PR0_OFFSET                                                      0XFD080684
+#undef DDR_PHY_ZQ0OR0_OFFSET 
+#define DDR_PHY_ZQ0OR0_OFFSET                                                      0XFD080694
+#undef DDR_PHY_ZQ0OR1_OFFSET 
+#define DDR_PHY_ZQ0OR1_OFFSET                                                      0XFD080698
+#undef DDR_PHY_ZQ1PR0_OFFSET 
+#define DDR_PHY_ZQ1PR0_OFFSET                                                      0XFD0806A4
+#undef DDR_PHY_DX0GCR0_OFFSET 
+#define DDR_PHY_DX0GCR0_OFFSET                                                     0XFD080700
+#undef DDR_PHY_DX0GCR4_OFFSET 
+#define DDR_PHY_DX0GCR4_OFFSET                                                     0XFD080710
+#undef DDR_PHY_DX0GCR5_OFFSET 
+#define DDR_PHY_DX0GCR5_OFFSET                                                     0XFD080714
+#undef DDR_PHY_DX0GCR6_OFFSET 
+#define DDR_PHY_DX0GCR6_OFFSET                                                     0XFD080718
+#undef DDR_PHY_DX0LCDLR2_OFFSET 
+#define DDR_PHY_DX0LCDLR2_OFFSET                                                   0XFD080788
+#undef DDR_PHY_DX0GTR0_OFFSET 
+#define DDR_PHY_DX0GTR0_OFFSET                                                     0XFD0807C0
+#undef DDR_PHY_DX1GCR0_OFFSET 
+#define DDR_PHY_DX1GCR0_OFFSET                                                     0XFD080800
+#undef DDR_PHY_DX1GCR4_OFFSET 
+#define DDR_PHY_DX1GCR4_OFFSET                                                     0XFD080810
+#undef DDR_PHY_DX1GCR5_OFFSET 
+#define DDR_PHY_DX1GCR5_OFFSET                                                     0XFD080814
+#undef DDR_PHY_DX1GCR6_OFFSET 
+#define DDR_PHY_DX1GCR6_OFFSET                                                     0XFD080818
+#undef DDR_PHY_DX1LCDLR2_OFFSET 
+#define DDR_PHY_DX1LCDLR2_OFFSET                                                   0XFD080888
+#undef DDR_PHY_DX1GTR0_OFFSET 
+#define DDR_PHY_DX1GTR0_OFFSET                                                     0XFD0808C0
+#undef DDR_PHY_DX2GCR0_OFFSET 
+#define DDR_PHY_DX2GCR0_OFFSET                                                     0XFD080900
+#undef DDR_PHY_DX2GCR1_OFFSET 
+#define DDR_PHY_DX2GCR1_OFFSET                                                     0XFD080904
+#undef DDR_PHY_DX2GCR4_OFFSET 
+#define DDR_PHY_DX2GCR4_OFFSET                                                     0XFD080910
+#undef DDR_PHY_DX2GCR5_OFFSET 
+#define DDR_PHY_DX2GCR5_OFFSET                                                     0XFD080914
+#undef DDR_PHY_DX2GCR6_OFFSET 
+#define DDR_PHY_DX2GCR6_OFFSET                                                     0XFD080918
+#undef DDR_PHY_DX2LCDLR2_OFFSET 
+#define DDR_PHY_DX2LCDLR2_OFFSET                                                   0XFD080988
+#undef DDR_PHY_DX2GTR0_OFFSET 
+#define DDR_PHY_DX2GTR0_OFFSET                                                     0XFD0809C0
+#undef DDR_PHY_DX3GCR0_OFFSET 
+#define DDR_PHY_DX3GCR0_OFFSET                                                     0XFD080A00
+#undef DDR_PHY_DX3GCR1_OFFSET 
+#define DDR_PHY_DX3GCR1_OFFSET                                                     0XFD080A04
+#undef DDR_PHY_DX3GCR4_OFFSET 
+#define DDR_PHY_DX3GCR4_OFFSET                                                     0XFD080A10
+#undef DDR_PHY_DX3GCR5_OFFSET 
+#define DDR_PHY_DX3GCR5_OFFSET                                                     0XFD080A14
+#undef DDR_PHY_DX3GCR6_OFFSET 
+#define DDR_PHY_DX3GCR6_OFFSET                                                     0XFD080A18
+#undef DDR_PHY_DX3LCDLR2_OFFSET 
+#define DDR_PHY_DX3LCDLR2_OFFSET                                                   0XFD080A88
+#undef DDR_PHY_DX3GTR0_OFFSET 
+#define DDR_PHY_DX3GTR0_OFFSET                                                     0XFD080AC0
+#undef DDR_PHY_DX4GCR0_OFFSET 
+#define DDR_PHY_DX4GCR0_OFFSET                                                     0XFD080B00
+#undef DDR_PHY_DX4GCR1_OFFSET 
+#define DDR_PHY_DX4GCR1_OFFSET                                                     0XFD080B04
+#undef DDR_PHY_DX4GCR4_OFFSET 
+#define DDR_PHY_DX4GCR4_OFFSET                                                     0XFD080B10
+#undef DDR_PHY_DX4GCR5_OFFSET 
+#define DDR_PHY_DX4GCR5_OFFSET                                                     0XFD080B14
+#undef DDR_PHY_DX4GCR6_OFFSET 
+#define DDR_PHY_DX4GCR6_OFFSET                                                     0XFD080B18
+#undef DDR_PHY_DX4LCDLR2_OFFSET 
+#define DDR_PHY_DX4LCDLR2_OFFSET                                                   0XFD080B88
+#undef DDR_PHY_DX4GTR0_OFFSET 
+#define DDR_PHY_DX4GTR0_OFFSET                                                     0XFD080BC0
+#undef DDR_PHY_DX5GCR0_OFFSET 
+#define DDR_PHY_DX5GCR0_OFFSET                                                     0XFD080C00
+#undef DDR_PHY_DX5GCR1_OFFSET 
+#define DDR_PHY_DX5GCR1_OFFSET                                                     0XFD080C04
+#undef DDR_PHY_DX5GCR4_OFFSET 
+#define DDR_PHY_DX5GCR4_OFFSET                                                     0XFD080C10
+#undef DDR_PHY_DX5GCR5_OFFSET 
+#define DDR_PHY_DX5GCR5_OFFSET                                                     0XFD080C14
+#undef DDR_PHY_DX5GCR6_OFFSET 
+#define DDR_PHY_DX5GCR6_OFFSET                                                     0XFD080C18
+#undef DDR_PHY_DX5LCDLR2_OFFSET 
+#define DDR_PHY_DX5LCDLR2_OFFSET                                                   0XFD080C88
+#undef DDR_PHY_DX5GTR0_OFFSET 
+#define DDR_PHY_DX5GTR0_OFFSET                                                     0XFD080CC0
+#undef DDR_PHY_DX6GCR0_OFFSET 
+#define DDR_PHY_DX6GCR0_OFFSET                                                     0XFD080D00
+#undef DDR_PHY_DX6GCR1_OFFSET 
+#define DDR_PHY_DX6GCR1_OFFSET                                                     0XFD080D04
+#undef DDR_PHY_DX6GCR4_OFFSET 
+#define DDR_PHY_DX6GCR4_OFFSET                                                     0XFD080D10
+#undef DDR_PHY_DX6GCR5_OFFSET 
+#define DDR_PHY_DX6GCR5_OFFSET                                                     0XFD080D14
+#undef DDR_PHY_DX6GCR6_OFFSET 
+#define DDR_PHY_DX6GCR6_OFFSET                                                     0XFD080D18
+#undef DDR_PHY_DX6LCDLR2_OFFSET 
+#define DDR_PHY_DX6LCDLR2_OFFSET                                                   0XFD080D88
+#undef DDR_PHY_DX6GTR0_OFFSET 
+#define DDR_PHY_DX6GTR0_OFFSET                                                     0XFD080DC0
+#undef DDR_PHY_DX7GCR0_OFFSET 
+#define DDR_PHY_DX7GCR0_OFFSET                                                     0XFD080E00
+#undef DDR_PHY_DX7GCR1_OFFSET 
+#define DDR_PHY_DX7GCR1_OFFSET                                                     0XFD080E04
+#undef DDR_PHY_DX7GCR4_OFFSET 
+#define DDR_PHY_DX7GCR4_OFFSET                                                     0XFD080E10
+#undef DDR_PHY_DX7GCR5_OFFSET 
+#define DDR_PHY_DX7GCR5_OFFSET                                                     0XFD080E14
+#undef DDR_PHY_DX7GCR6_OFFSET 
+#define DDR_PHY_DX7GCR6_OFFSET                                                     0XFD080E18
+#undef DDR_PHY_DX7LCDLR2_OFFSET 
+#define DDR_PHY_DX7LCDLR2_OFFSET                                                   0XFD080E88
+#undef DDR_PHY_DX7GTR0_OFFSET 
+#define DDR_PHY_DX7GTR0_OFFSET                                                     0XFD080EC0
+#undef DDR_PHY_DX8GCR0_OFFSET 
+#define DDR_PHY_DX8GCR0_OFFSET                                                     0XFD080F00
+#undef DDR_PHY_DX8GCR1_OFFSET 
+#define DDR_PHY_DX8GCR1_OFFSET                                                     0XFD080F04
+#undef DDR_PHY_DX8GCR4_OFFSET 
+#define DDR_PHY_DX8GCR4_OFFSET                                                     0XFD080F10
+#undef DDR_PHY_DX8GCR5_OFFSET 
+#define DDR_PHY_DX8GCR5_OFFSET                                                     0XFD080F14
+#undef DDR_PHY_DX8GCR6_OFFSET 
+#define DDR_PHY_DX8GCR6_OFFSET                                                     0XFD080F18
+#undef DDR_PHY_DX8LCDLR2_OFFSET 
+#define DDR_PHY_DX8LCDLR2_OFFSET                                                   0XFD080F88
+#undef DDR_PHY_DX8GTR0_OFFSET 
+#define DDR_PHY_DX8GTR0_OFFSET                                                     0XFD080FC0
+#undef DDR_PHY_DX8SL0DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL0DQSCTL_OFFSET                                                0XFD08141C
+#undef DDR_PHY_DX8SL0DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL0DXCTL2_OFFSET                                                0XFD08142C
+#undef DDR_PHY_DX8SL0IOCR_OFFSET 
+#define DDR_PHY_DX8SL0IOCR_OFFSET                                                  0XFD081430
+#undef DDR_PHY_DX8SL1DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL1DQSCTL_OFFSET                                                0XFD08145C
+#undef DDR_PHY_DX8SL1DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL1DXCTL2_OFFSET                                                0XFD08146C
+#undef DDR_PHY_DX8SL1IOCR_OFFSET 
+#define DDR_PHY_DX8SL1IOCR_OFFSET                                                  0XFD081470
+#undef DDR_PHY_DX8SL2DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL2DQSCTL_OFFSET                                                0XFD08149C
+#undef DDR_PHY_DX8SL2DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL2DXCTL2_OFFSET                                                0XFD0814AC
+#undef DDR_PHY_DX8SL2IOCR_OFFSET 
+#define DDR_PHY_DX8SL2IOCR_OFFSET                                                  0XFD0814B0
+#undef DDR_PHY_DX8SL3DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL3DQSCTL_OFFSET                                                0XFD0814DC
+#undef DDR_PHY_DX8SL3DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL3DXCTL2_OFFSET                                                0XFD0814EC
+#undef DDR_PHY_DX8SL3IOCR_OFFSET 
+#define DDR_PHY_DX8SL3IOCR_OFFSET                                                  0XFD0814F0
+#undef DDR_PHY_DX8SL4DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL4DQSCTL_OFFSET                                                0XFD08151C
+#undef DDR_PHY_DX8SL4DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL4DXCTL2_OFFSET                                                0XFD08152C
+#undef DDR_PHY_DX8SL4IOCR_OFFSET 
+#define DDR_PHY_DX8SL4IOCR_OFFSET                                                  0XFD081530
+#undef DDR_PHY_DX8SLBDQSCTL_OFFSET 
+#define DDR_PHY_DX8SLBDQSCTL_OFFSET                                                0XFD0817DC
+#undef DDR_PHY_PIR_OFFSET 
+#define DDR_PHY_PIR_OFFSET                                                         0XFD080004
+
+/*DDR block level reset inside of the DDR Sub System*/
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_MASK 
+#define CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL                                        0x0000000F
+#define CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT                                         3
+#define CRF_APB_RST_DDR_SS_DDR_RESET_MASK                                          0x00000008U
+
+/*Indicates the configuration of the device used in the system. - 00 - x4 device - 01 - x8 device - 10 - x16 device - 11 - x32 
+		evice*/
+#undef DDRC_MSTR_DEVICE_CONFIG_DEFVAL 
+#undef DDRC_MSTR_DEVICE_CONFIG_SHIFT 
+#undef DDRC_MSTR_DEVICE_CONFIG_MASK 
+#define DDRC_MSTR_DEVICE_CONFIG_DEFVAL                                             0x03040001
+#define DDRC_MSTR_DEVICE_CONFIG_SHIFT                                              30
+#define DDRC_MSTR_DEVICE_CONFIG_MASK                                               0xC0000000U
+
+/*Choose which registers are used. - 0 - Original registers - 1 - Shadow registers*/
+#undef DDRC_MSTR_FREQUENCY_MODE_DEFVAL 
+#undef DDRC_MSTR_FREQUENCY_MODE_SHIFT 
+#undef DDRC_MSTR_FREQUENCY_MODE_MASK 
+#define DDRC_MSTR_FREQUENCY_MODE_DEFVAL                                            0x03040001
+#define DDRC_MSTR_FREQUENCY_MODE_SHIFT                                             29
+#define DDRC_MSTR_FREQUENCY_MODE_MASK                                              0x20000000U
+
+/*Only present for multi-rank configurations. Each bit represents one rank. For two-rank configurations, only bits[25:24] are p
+		esent. - 1 - populated - 0 - unpopulated LSB is the lowest rank number. For 2 ranks following combinations are legal: - 01 - 
+		ne rank - 11 - Two ranks - Others - Reserved. For 4 ranks following combinations are legal: - 0001 - One rank - 0011 - Two ra
+		ks - 1111 - Four ranks*/
+#undef DDRC_MSTR_ACTIVE_RANKS_DEFVAL 
+#undef DDRC_MSTR_ACTIVE_RANKS_SHIFT 
+#undef DDRC_MSTR_ACTIVE_RANKS_MASK 
+#define DDRC_MSTR_ACTIVE_RANKS_DEFVAL                                              0x03040001
+#define DDRC_MSTR_ACTIVE_RANKS_SHIFT                                               24
+#define DDRC_MSTR_ACTIVE_RANKS_MASK                                                0x03000000U
+
+/*SDRAM burst length used: - 0001 - Burst length of 2 (only supported for mDDR) - 0010 - Burst length of 4 - 0100 - Burst lengt
+		 of 8 - 1000 - Burst length of 16 (only supported for mDDR, LPDDR2, and LPDDR4) All other values are reserved. This controls 
+		he burst size used to access the SDRAM. This must match the burst length mode register setting in the SDRAM. (For BC4/8 on-th
+		-fly mode of DDR3 and DDR4, set this field to 0x0100) Burst length of 2 is not supported with AXI ports when MEMC_BURST_LENGT
+		 is 8. Burst length of 2 is only supported with MEMC_FREQ_RATIO = 1*/
+#undef DDRC_MSTR_BURST_RDWR_DEFVAL 
+#undef DDRC_MSTR_BURST_RDWR_SHIFT 
+#undef DDRC_MSTR_BURST_RDWR_MASK 
+#define DDRC_MSTR_BURST_RDWR_DEFVAL                                                0x03040001
+#define DDRC_MSTR_BURST_RDWR_SHIFT                                                 16
+#define DDRC_MSTR_BURST_RDWR_MASK                                                  0x000F0000U
+
+/*Set to 1 when the uMCTL2 and DRAM has to be put in DLL-off mode for low frequency operation. Set to 0 to put uMCTL2 and DRAM 
+		n DLL-on mode for normal frequency operation. If DDR4 CRC/parity retry is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), d
+		l_off_mode is not supported, and this bit must be set to '0'.*/
+#undef DDRC_MSTR_DLL_OFF_MODE_DEFVAL 
+#undef DDRC_MSTR_DLL_OFF_MODE_SHIFT 
+#undef DDRC_MSTR_DLL_OFF_MODE_MASK 
+#define DDRC_MSTR_DLL_OFF_MODE_DEFVAL                                              0x03040001
+#define DDRC_MSTR_DLL_OFF_MODE_SHIFT                                               15
+#define DDRC_MSTR_DLL_OFF_MODE_MASK                                                0x00008000U
+
+/*Selects proportion of DQ bus width that is used by the SDRAM - 00 - Full DQ bus width to SDRAM - 01 - Half DQ bus width to SD
+		AM - 10 - Quarter DQ bus width to SDRAM - 11 - Reserved. Note that half bus width mode is only supported when the SDRAM bus w
+		dth is a multiple of 16, and quarter bus width mode is only supported when the SDRAM bus width is a multiple of 32 and the co
+		figuration parameter MEMC_QBUS_SUPPORT is set. Bus width refers to DQ bus width (excluding any ECC width).*/
+#undef DDRC_MSTR_DATA_BUS_WIDTH_DEFVAL 
+#undef DDRC_MSTR_DATA_BUS_WIDTH_SHIFT 
+#undef DDRC_MSTR_DATA_BUS_WIDTH_MASK 
+#define DDRC_MSTR_DATA_BUS_WIDTH_DEFVAL                                            0x03040001
+#define DDRC_MSTR_DATA_BUS_WIDTH_SHIFT                                             12
+#define DDRC_MSTR_DATA_BUS_WIDTH_MASK                                              0x00003000U
+
+/*1 indicates put the DRAM in geardown mode (2N) and 0 indicates put the DRAM in normal mode (1N). This register can be changed
+		 only when the Controller is in self-refresh mode. This signal must be set the same value as MR3 bit A3. Note: Geardown mode 
+		s not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set*/
+#undef DDRC_MSTR_GEARDOWN_MODE_DEFVAL 
+#undef DDRC_MSTR_GEARDOWN_MODE_SHIFT 
+#undef DDRC_MSTR_GEARDOWN_MODE_MASK 
+#define DDRC_MSTR_GEARDOWN_MODE_DEFVAL                                             0x03040001
+#define DDRC_MSTR_GEARDOWN_MODE_SHIFT                                              11
+#define DDRC_MSTR_GEARDOWN_MODE_MASK                                               0x00000800U
+
+/*If 1, then uMCTL2 uses 2T timing. Otherwise, uses 1T timing. In 2T timing, all command signals (except chip select) are held 
+		or 2 clocks on the SDRAM bus. Chip select is asserted on the second cycle of the command Note: 2T timing is not supported in 
+		PDDR2/LPDDR3/LPDDR4 mode Note: 2T timing is not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set Note: 2T ti
+		ing is not supported in DDR4 geardown mode.*/
+#undef DDRC_MSTR_EN_2T_TIMING_MODE_DEFVAL 
+#undef DDRC_MSTR_EN_2T_TIMING_MODE_SHIFT 
+#undef DDRC_MSTR_EN_2T_TIMING_MODE_MASK 
+#define DDRC_MSTR_EN_2T_TIMING_MODE_DEFVAL                                         0x03040001
+#define DDRC_MSTR_EN_2T_TIMING_MODE_SHIFT                                          10
+#define DDRC_MSTR_EN_2T_TIMING_MODE_MASK                                           0x00000400U
+
+/*When set, enable burst-chop in DDR3/DDR4. Burst Chop for Reads is exercised only in HIF configurations (UMCTL2_INCL_ARB not s
+		t) and if in full bus width mode (MSTR.data_bus_width = 00). Burst Chop for Writes is exercised only if Partial Writes enable
+		 (UMCTL2_PARTIAL_WR=1) and if CRC is disabled (CRCPARCTL1.crc_enable = 0). If DDR4 CRC/parity retry is enabled (CRCPARCTL1.cr
+		_parity_retry_enable = 1), burst chop is not supported, and this bit must be set to '0'*/
+#undef DDRC_MSTR_BURSTCHOP_DEFVAL 
+#undef DDRC_MSTR_BURSTCHOP_SHIFT 
+#undef DDRC_MSTR_BURSTCHOP_MASK 
+#define DDRC_MSTR_BURSTCHOP_DEFVAL                                                 0x03040001
+#define DDRC_MSTR_BURSTCHOP_SHIFT                                                  9
+#define DDRC_MSTR_BURSTCHOP_MASK                                                   0x00000200U
+
+/*Select LPDDR4 SDRAM - 1 - LPDDR4 SDRAM device in use. - 0 - non-LPDDR4 device in use Present only in designs configured to su
+		port LPDDR4.*/
+#undef DDRC_MSTR_LPDDR4_DEFVAL 
+#undef DDRC_MSTR_LPDDR4_SHIFT 
+#undef DDRC_MSTR_LPDDR4_MASK 
+#define DDRC_MSTR_LPDDR4_DEFVAL                                                    0x03040001
+#define DDRC_MSTR_LPDDR4_SHIFT                                                     5
+#define DDRC_MSTR_LPDDR4_MASK                                                      0x00000020U
+
+/*Select DDR4 SDRAM - 1 - DDR4 SDRAM device in use. - 0 - non-DDR4 device in use Present only in designs configured to support 
+		DR4.*/
+#undef DDRC_MSTR_DDR4_DEFVAL 
+#undef DDRC_MSTR_DDR4_SHIFT 
+#undef DDRC_MSTR_DDR4_MASK 
+#define DDRC_MSTR_DDR4_DEFVAL                                                      0x03040001
+#define DDRC_MSTR_DDR4_SHIFT                                                       4
+#define DDRC_MSTR_DDR4_MASK                                                        0x00000010U
+
+/*Select LPDDR3 SDRAM - 1 - LPDDR3 SDRAM device in use. - 0 - non-LPDDR3 device in use Present only in designs configured to su
+		port LPDDR3.*/
+#undef DDRC_MSTR_LPDDR3_DEFVAL 
+#undef DDRC_MSTR_LPDDR3_SHIFT 
+#undef DDRC_MSTR_LPDDR3_MASK 
+#define DDRC_MSTR_LPDDR3_DEFVAL                                                    0x03040001
+#define DDRC_MSTR_LPDDR3_SHIFT                                                     3
+#define DDRC_MSTR_LPDDR3_MASK                                                      0x00000008U
+
+/*Select LPDDR2 SDRAM - 1 - LPDDR2 SDRAM device in use. - 0 - non-LPDDR2 device in use Present only in designs configured to su
+		port LPDDR2.*/
+#undef DDRC_MSTR_LPDDR2_DEFVAL 
+#undef DDRC_MSTR_LPDDR2_SHIFT 
+#undef DDRC_MSTR_LPDDR2_MASK 
+#define DDRC_MSTR_LPDDR2_DEFVAL                                                    0x03040001
+#define DDRC_MSTR_LPDDR2_SHIFT                                                     2
+#define DDRC_MSTR_LPDDR2_MASK                                                      0x00000004U
+
+/*Select DDR3 SDRAM - 1 - DDR3 SDRAM device in use - 0 - non-DDR3 SDRAM device in use Only present in designs that support DDR3
+		*/
+#undef DDRC_MSTR_DDR3_DEFVAL 
+#undef DDRC_MSTR_DDR3_SHIFT 
+#undef DDRC_MSTR_DDR3_MASK 
+#define DDRC_MSTR_DDR3_DEFVAL                                                      0x03040001
+#define DDRC_MSTR_DDR3_SHIFT                                                       0
+#define DDRC_MSTR_DDR3_MASK                                                        0x00000001U
+
+/*Setting this register bit to 1 triggers a mode register read or write operation. When the MR operation is complete, the uMCTL
+		 automatically clears this bit. The other register fields of this register must be written in a separate APB transaction, bef
+		re setting this mr_wr bit. It is recommended NOT to set this signal if in Init, Deep power-down or MPSM operating modes.*/
+#undef DDRC_MRCTRL0_MR_WR_DEFVAL 
+#undef DDRC_MRCTRL0_MR_WR_SHIFT 
+#undef DDRC_MRCTRL0_MR_WR_MASK 
+#define DDRC_MRCTRL0_MR_WR_DEFVAL                                                  0x00000030
+#define DDRC_MRCTRL0_MR_WR_SHIFT                                                   31
+#define DDRC_MRCTRL0_MR_WR_MASK                                                    0x80000000U
+
+/*Address of the mode register that is to be written to. - 0000 - MR0 - 0001 - MR1 - 0010 - MR2 - 0011 - MR3 - 0100 - MR4 - 010
+		 - MR5 - 0110 - MR6 - 0111 - MR7 Don't Care for LPDDR2/LPDDR3/LPDDR4 (see MRCTRL1.mr_data for mode register addressing in LPD
+		R2/LPDDR3/LPDDR4) This signal is also used for writing to control words of RDIMMs. In that case, it corresponds to the bank a
+		dress bits sent to the RDIMM In case of DDR4, the bit[3:2] corresponds to the bank group bits. Therefore, the bit[3] as well 
+		s the bit[2:0] must be set to an appropriate value which is considered both the Address Mirroring of UDIMMs/RDIMMs and the Ou
+		put Inversion of RDIMMs.*/
+#undef DDRC_MRCTRL0_MR_ADDR_DEFVAL 
+#undef DDRC_MRCTRL0_MR_ADDR_SHIFT 
+#undef DDRC_MRCTRL0_MR_ADDR_MASK 
+#define DDRC_MRCTRL0_MR_ADDR_DEFVAL                                                0x00000030
+#define DDRC_MRCTRL0_MR_ADDR_SHIFT                                                 12
+#define DDRC_MRCTRL0_MR_ADDR_MASK                                                  0x0000F000U
+
+/*Controls which rank is accessed by MRCTRL0.mr_wr. Normally, it is desired to access all ranks, so all bits should be set to 1
+		 However, for multi-rank UDIMMs/RDIMMs which implement address mirroring, it may be necessary to access ranks individually. E
+		amples (assume uMCTL2 is configured for 4 ranks): - 0x1 - select rank 0 only - 0x2 - select rank 1 only - 0x5 - select ranks 
+		 and 2 - 0xA - select ranks 1 and 3 - 0xF - select ranks 0, 1, 2 and 3*/
+#undef DDRC_MRCTRL0_MR_RANK_DEFVAL 
+#undef DDRC_MRCTRL0_MR_RANK_SHIFT 
+#undef DDRC_MRCTRL0_MR_RANK_MASK 
+#define DDRC_MRCTRL0_MR_RANK_DEFVAL                                                0x00000030
+#define DDRC_MRCTRL0_MR_RANK_SHIFT                                                 4
+#define DDRC_MRCTRL0_MR_RANK_MASK                                                  0x00000030U
+
+/*Indicates whether Software intervention is allowed via MRCTRL0/MRCTRL1 before automatic SDRAM initialization routine or not. 
+		or DDR4, this bit can be used to initialize the DDR4 RCD (MR7) before automatic SDRAM initialization. For LPDDR4, this bit ca
+		 be used to program additional mode registers before automatic SDRAM initialization if necessary. Note: This must be cleared 
+		o 0 after completing Software operation. Otherwise, SDRAM initialization routine will not re-start. - 0 - Software interventi
+		n is not allowed - 1 - Software intervention is allowed*/
+#undef DDRC_MRCTRL0_SW_INIT_INT_DEFVAL 
+#undef DDRC_MRCTRL0_SW_INIT_INT_SHIFT 
+#undef DDRC_MRCTRL0_SW_INIT_INT_MASK 
+#define DDRC_MRCTRL0_SW_INIT_INT_DEFVAL                                            0x00000030
+#define DDRC_MRCTRL0_SW_INIT_INT_SHIFT                                             3
+#define DDRC_MRCTRL0_SW_INIT_INT_MASK                                              0x00000008U
+
+/*Indicates whether the mode register operation is MRS in PDA mode or not - 0 - MRS - 1 - MRS in Per DRAM Addressability mode*/
+#undef DDRC_MRCTRL0_PDA_EN_DEFVAL 
+#undef DDRC_MRCTRL0_PDA_EN_SHIFT 
+#undef DDRC_MRCTRL0_PDA_EN_MASK 
+#define DDRC_MRCTRL0_PDA_EN_DEFVAL                                                 0x00000030
+#define DDRC_MRCTRL0_PDA_EN_SHIFT                                                  2
+#define DDRC_MRCTRL0_PDA_EN_MASK                                                   0x00000004U
+
+/*Indicates whether the mode register operation is MRS or WR/RD for MPR (only supported for DDR4) - 0 - MRS - 1 - WR/RD for MPR*/
+#undef DDRC_MRCTRL0_MPR_EN_DEFVAL 
+#undef DDRC_MRCTRL0_MPR_EN_SHIFT 
+#undef DDRC_MRCTRL0_MPR_EN_MASK 
+#define DDRC_MRCTRL0_MPR_EN_DEFVAL                                                 0x00000030
+#define DDRC_MRCTRL0_MPR_EN_SHIFT                                                  1
+#define DDRC_MRCTRL0_MPR_EN_MASK                                                   0x00000002U
+
+/*Indicates whether the mode register operation is read or write. Only used for LPDDR2/LPDDR3/LPDDR4/DDR4. - 0 - Write - 1 - Re
+		d*/
+#undef DDRC_MRCTRL0_MR_TYPE_DEFVAL 
+#undef DDRC_MRCTRL0_MR_TYPE_SHIFT 
+#undef DDRC_MRCTRL0_MR_TYPE_MASK 
+#define DDRC_MRCTRL0_MR_TYPE_DEFVAL                                                0x00000030
+#define DDRC_MRCTRL0_MR_TYPE_SHIFT                                                 0
+#define DDRC_MRCTRL0_MR_TYPE_MASK                                                  0x00000001U
+
+/*Derate value of tRC for LPDDR4 - 0 - Derating uses +1. - 1 - Derating uses +2. - 2 - Derating uses +3. - 3 - Derating uses +4
+		 Present only in designs configured to support LPDDR4. The required number of cycles for derating can be determined by dividi
+		g 3.75ns by the core_ddrc_core_clk period, and rounding up the next integer.*/
+#undef DDRC_DERATEEN_RC_DERATE_VALUE_DEFVAL 
+#undef DDRC_DERATEEN_RC_DERATE_VALUE_SHIFT 
+#undef DDRC_DERATEEN_RC_DERATE_VALUE_MASK 
+#define DDRC_DERATEEN_RC_DERATE_VALUE_DEFVAL                                       0x00000000
+#define DDRC_DERATEEN_RC_DERATE_VALUE_SHIFT                                        8
+#define DDRC_DERATEEN_RC_DERATE_VALUE_MASK                                         0x00000300U
+
+/*Derate byte Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 Indicates which byte of the MRR data is used f
+		r derating. The maximum valid value depends on MEMC_DRAM_TOTAL_DATA_WIDTH.*/
+#undef DDRC_DERATEEN_DERATE_BYTE_DEFVAL 
+#undef DDRC_DERATEEN_DERATE_BYTE_SHIFT 
+#undef DDRC_DERATEEN_DERATE_BYTE_MASK 
+#define DDRC_DERATEEN_DERATE_BYTE_DEFVAL                                           0x00000000
+#define DDRC_DERATEEN_DERATE_BYTE_SHIFT                                            4
+#define DDRC_DERATEEN_DERATE_BYTE_MASK                                             0x000000F0U
+
+/*Derate value - 0 - Derating uses +1. - 1 - Derating uses +2. Present only in designs configured to support LPDDR2/LPDDR3/LPDD
+		4 Set to 0 for all LPDDR2 speed grades as derating value of +1.875 ns is less than a core_ddrc_core_clk period. Can be 0 or 1
+		for LPDDR3/LPDDR4, depending if +1.875 ns is less than a core_ddrc_core_clk period or not.*/
+#undef DDRC_DERATEEN_DERATE_VALUE_DEFVAL 
+#undef DDRC_DERATEEN_DERATE_VALUE_SHIFT 
+#undef DDRC_DERATEEN_DERATE_VALUE_MASK 
+#define DDRC_DERATEEN_DERATE_VALUE_DEFVAL                                          0x00000000
+#define DDRC_DERATEEN_DERATE_VALUE_SHIFT                                           1
+#define DDRC_DERATEEN_DERATE_VALUE_MASK                                            0x00000002U
+
+/*Enables derating - 0 - Timing parameter derating is disabled - 1 - Timing parameter derating is enabled using MR4 read value.
+		Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 This field must be set to '0' for non-LPDDR2/LPDDR3/LPDDR4
+		mode.*/
+#undef DDRC_DERATEEN_DERATE_ENABLE_DEFVAL 
+#undef DDRC_DERATEEN_DERATE_ENABLE_SHIFT 
+#undef DDRC_DERATEEN_DERATE_ENABLE_MASK 
+#define DDRC_DERATEEN_DERATE_ENABLE_DEFVAL                                         0x00000000
+#define DDRC_DERATEEN_DERATE_ENABLE_SHIFT                                          0
+#define DDRC_DERATEEN_DERATE_ENABLE_MASK                                           0x00000001U
+
+/*Interval between two MR4 reads, used to derate the timing parameters. Present only in designs configured to support LPDDR2/LP
+		DR3/LPDDR4. This register must not be set to zero*/
+#undef DDRC_DERATEINT_MR4_READ_INTERVAL_DEFVAL 
+#undef DDRC_DERATEINT_MR4_READ_INTERVAL_SHIFT 
+#undef DDRC_DERATEINT_MR4_READ_INTERVAL_MASK 
+#define DDRC_DERATEINT_MR4_READ_INTERVAL_DEFVAL                                    
+#define DDRC_DERATEINT_MR4_READ_INTERVAL_SHIFT                                     0
+#define DDRC_DERATEINT_MR4_READ_INTERVAL_MASK                                      0xFFFFFFFFU
+
+/*Self refresh state is an intermediate state to enter to Self refresh power down state or exit Self refresh power down state f
+		r LPDDR4. This register controls transition from the Self refresh state. - 1 - Prohibit transition from Self refresh state - 
+		 - Allow transition from Self refresh state*/
+#undef DDRC_PWRCTL_STAY_IN_SELFREF_DEFVAL 
+#undef DDRC_PWRCTL_STAY_IN_SELFREF_SHIFT 
+#undef DDRC_PWRCTL_STAY_IN_SELFREF_MASK 
+#define DDRC_PWRCTL_STAY_IN_SELFREF_DEFVAL                                         0x00000000
+#define DDRC_PWRCTL_STAY_IN_SELFREF_SHIFT                                          6
+#define DDRC_PWRCTL_STAY_IN_SELFREF_MASK                                           0x00000040U
+
+/*A value of 1 to this register causes system to move to Self Refresh state immediately, as long as it is not in INIT or DPD/MP
+		M operating_mode. This is referred to as Software Entry/Exit to Self Refresh. - 1 - Software Entry to Self Refresh - 0 - Soft
+		are Exit from Self Refresh*/
+#undef DDRC_PWRCTL_SELFREF_SW_DEFVAL 
+#undef DDRC_PWRCTL_SELFREF_SW_SHIFT 
+#undef DDRC_PWRCTL_SELFREF_SW_MASK 
+#define DDRC_PWRCTL_SELFREF_SW_DEFVAL                                              0x00000000
+#define DDRC_PWRCTL_SELFREF_SW_SHIFT                                               5
+#define DDRC_PWRCTL_SELFREF_SW_MASK                                                0x00000020U
+
+/*When this is 1, the uMCTL2 puts the SDRAM into maximum power saving mode when the transaction store is empty. This register m
+		st be reset to '0' to bring uMCTL2 out of maximum power saving mode. Present only in designs configured to support DDR4. For 
+		on-DDR4, this register should not be set to 1. Note that MPSM is not supported when using a DWC DDR PHY, if the PHY parameter
+		DWC_AC_CS_USE is disabled, as the MPSM exit sequence requires the chip-select signal to toggle. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRCTL_MPSM_EN_DEFVAL 
+#undef DDRC_PWRCTL_MPSM_EN_SHIFT 
+#undef DDRC_PWRCTL_MPSM_EN_MASK 
+#define DDRC_PWRCTL_MPSM_EN_DEFVAL                                                 0x00000000
+#define DDRC_PWRCTL_MPSM_EN_SHIFT                                                  4
+#define DDRC_PWRCTL_MPSM_EN_MASK                                                   0x00000010U
+
+/*Enable the assertion of dfi_dram_clk_disable whenever a clock is not required by the SDRAM. If set to 0, dfi_dram_clk_disable
+		is never asserted. Assertion of dfi_dram_clk_disable is as follows: In DDR2/DDR3, can only be asserted in Self Refresh. In DD
+		4, can be asserted in following: - in Self Refresh. - in Maximum Power Saving Mode In mDDR/LPDDR2/LPDDR3, can be asserted in 
+		ollowing: - in Self Refresh - in Power Down - in Deep Power Down - during Normal operation (Clock Stop) In LPDDR4, can be ass
+		rted in following: - in Self Refresh Power Down - in Power Down - during Normal operation (Clock Stop)*/
+#undef DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_DEFVAL 
+#undef DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_SHIFT 
+#undef DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_MASK 
+#define DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_DEFVAL                                 0x00000000
+#define DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_SHIFT                                  3
+#define DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_MASK                                   0x00000008U
+
+/*When this is 1, uMCTL2 puts the SDRAM into deep power-down mode when the transaction store is empty. This register must be re
+		et to '0' to bring uMCTL2 out of deep power-down mode. Controller performs automatic SDRAM initialization on deep power-down 
+		xit. Present only in designs configured to support mDDR or LPDDR2 or LPDDR3. For non-mDDR/non-LPDDR2/non-LPDDR3, this registe
+		 should not be set to 1. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRCTL_DEEPPOWERDOWN_EN_DEFVAL 
+#undef DDRC_PWRCTL_DEEPPOWERDOWN_EN_SHIFT 
+#undef DDRC_PWRCTL_DEEPPOWERDOWN_EN_MASK 
+#define DDRC_PWRCTL_DEEPPOWERDOWN_EN_DEFVAL                                        0x00000000
+#define DDRC_PWRCTL_DEEPPOWERDOWN_EN_SHIFT                                         2
+#define DDRC_PWRCTL_DEEPPOWERDOWN_EN_MASK                                          0x00000004U
+
+/*If true then the uMCTL2 goes into power-down after a programmable number of cycles 'maximum idle clocks before power down' (P
+		RTMG.powerdown_to_x32). This register bit may be re-programmed during the course of normal operation.*/
+#undef DDRC_PWRCTL_POWERDOWN_EN_DEFVAL 
+#undef DDRC_PWRCTL_POWERDOWN_EN_SHIFT 
+#undef DDRC_PWRCTL_POWERDOWN_EN_MASK 
+#define DDRC_PWRCTL_POWERDOWN_EN_DEFVAL                                            0x00000000
+#define DDRC_PWRCTL_POWERDOWN_EN_SHIFT                                             1
+#define DDRC_PWRCTL_POWERDOWN_EN_MASK                                              0x00000002U
+
+/*If true then the uMCTL2 puts the SDRAM into Self Refresh after a programmable number of cycles 'maximum idle clocks before Se
+		f Refresh (PWRTMG.selfref_to_x32)'. This register bit may be re-programmed during the course of normal operation.*/
+#undef DDRC_PWRCTL_SELFREF_EN_DEFVAL 
+#undef DDRC_PWRCTL_SELFREF_EN_SHIFT 
+#undef DDRC_PWRCTL_SELFREF_EN_MASK 
+#define DDRC_PWRCTL_SELFREF_EN_DEFVAL                                              0x00000000
+#define DDRC_PWRCTL_SELFREF_EN_SHIFT                                               0
+#define DDRC_PWRCTL_SELFREF_EN_MASK                                                0x00000001U
+
+/*After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into Self Refresh. This must be enabled in 
+		he PWRCTL.selfref_en. Unit: Multiples of 32 clocks. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRTMG_SELFREF_TO_X32_DEFVAL 
+#undef DDRC_PWRTMG_SELFREF_TO_X32_SHIFT 
+#undef DDRC_PWRTMG_SELFREF_TO_X32_MASK 
+#define DDRC_PWRTMG_SELFREF_TO_X32_DEFVAL                                          0x00402010
+#define DDRC_PWRTMG_SELFREF_TO_X32_SHIFT                                           16
+#define DDRC_PWRTMG_SELFREF_TO_X32_MASK                                            0x00FF0000U
+
+/*Minimum deep power-down time. For mDDR, value from the JEDEC specification is 0 as mDDR exits from deep power-down mode immed
+		ately after PWRCTL.deeppowerdown_en is de-asserted. For LPDDR2/LPDDR3, value from the JEDEC specification is 500us. Unit: Mul
+		iples of 4096 clocks. Present only in designs configured to support mDDR, LPDDR2 or LPDDR3. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRTMG_T_DPD_X4096_DEFVAL 
+#undef DDRC_PWRTMG_T_DPD_X4096_SHIFT 
+#undef DDRC_PWRTMG_T_DPD_X4096_MASK 
+#define DDRC_PWRTMG_T_DPD_X4096_DEFVAL                                             0x00402010
+#define DDRC_PWRTMG_T_DPD_X4096_SHIFT                                              8
+#define DDRC_PWRTMG_T_DPD_X4096_MASK                                               0x0000FF00U
+
+/*After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into power-down. This must be enabled in th
+		 PWRCTL.powerdown_en. Unit: Multiples of 32 clocks FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRTMG_POWERDOWN_TO_X32_DEFVAL 
+#undef DDRC_PWRTMG_POWERDOWN_TO_X32_SHIFT 
+#undef DDRC_PWRTMG_POWERDOWN_TO_X32_MASK 
+#define DDRC_PWRTMG_POWERDOWN_TO_X32_DEFVAL                                        0x00402010
+#define DDRC_PWRTMG_POWERDOWN_TO_X32_SHIFT                                         0
+#define DDRC_PWRTMG_POWERDOWN_TO_X32_MASK                                          0x0000001FU
+
+/*Threshold value in number of clock cycles before the critical refresh or page timer expires. A critical refresh is to be issu
+		d before this threshold is reached. It is recommended that this not be changed from the default value, currently shown as 0x2
+		 It must always be less than internally used t_rfc_nom_x32. Note that, in LPDDR2/LPDDR3/LPDDR4, internally used t_rfc_nom_x32
+		may be equal to RFSHTMG.t_rfc_nom_x32>>2 if derating is enabled (DERATEEN.derate_enable=1). Otherwise, internally used t_rfc_
+		om_x32 will be equal to RFSHTMG.t_rfc_nom_x32. Unit: Multiples of 32 clocks.*/
+#undef DDRC_RFSHCTL0_REFRESH_MARGIN_DEFVAL 
+#undef DDRC_RFSHCTL0_REFRESH_MARGIN_SHIFT 
+#undef DDRC_RFSHCTL0_REFRESH_MARGIN_MASK 
+#define DDRC_RFSHCTL0_REFRESH_MARGIN_DEFVAL                                        0x00210000
+#define DDRC_RFSHCTL0_REFRESH_MARGIN_SHIFT                                         20
+#define DDRC_RFSHCTL0_REFRESH_MARGIN_MASK                                          0x00F00000U
+
+/*If the refresh timer (tRFCnom, also known as tREFI) has expired at least once, but it has not expired (RFSHCTL0.refresh_burst
+		1) times yet, then a speculative refresh may be performed. A speculative refresh is a refresh performed at a time when refres
+		 would be useful, but before it is absolutely required. When the SDRAM bus is idle for a period of time determined by this RF
+		HCTL0.refresh_to_x32 and the refresh timer has expired at least once since the last refresh, then a speculative refresh is pe
+		formed. Speculative refreshes continues successively until there are no refreshes pending or until new reads or writes are is
+		ued to the uMCTL2. FOR PERFORMANCE ONLY.*/
+#undef DDRC_RFSHCTL0_REFRESH_TO_X32_DEFVAL 
+#undef DDRC_RFSHCTL0_REFRESH_TO_X32_SHIFT 
+#undef DDRC_RFSHCTL0_REFRESH_TO_X32_MASK 
+#define DDRC_RFSHCTL0_REFRESH_TO_X32_DEFVAL                                        0x00210000
+#define DDRC_RFSHCTL0_REFRESH_TO_X32_SHIFT                                         12
+#define DDRC_RFSHCTL0_REFRESH_TO_X32_MASK                                          0x0001F000U
+
+/*The programmed value + 1 is the number of refresh timeouts that is allowed to accumulate before traffic is blocked and the re
+		reshes are forced to execute. Closing pages to perform a refresh is a one-time penalty that must be paid for each group of re
+		reshes. Therefore, performing refreshes in a burst reduces the per-refresh penalty of these page closings. Higher numbers for
+		RFSHCTL.refresh_burst slightly increases utilization; lower numbers decreases the worst-case latency associated with refreshe
+		. - 0 - single refresh - 1 - burst-of-2 refresh - 7 - burst-of-8 refresh For information on burst refresh feature refer to se
+		tion 3.9 of DDR2 JEDEC specification - JESD79-2F.pdf. For DDR2/3, the refresh is always per-rank and not per-bank. The rank r
+		fresh can be accumulated over 8*tREFI cycles using the burst refresh feature. In DDR4 mode, according to Fine Granularity fea
+		ure, 8 refreshes can be postponed in 1X mode, 16 refreshes in 2X mode and 32 refreshes in 4X mode. If using PHY-initiated upd
+		tes, care must be taken in the setting of RFSHCTL0.refresh_burst, to ensure that tRFCmax is not violated due to a PHY-initiat
+		d update occurring shortly before a refresh burst was due. In this situation, the refresh burst will be delayed until the PHY
+		initiated update is complete.*/
+#undef DDRC_RFSHCTL0_REFRESH_BURST_DEFVAL 
+#undef DDRC_RFSHCTL0_REFRESH_BURST_SHIFT 
+#undef DDRC_RFSHCTL0_REFRESH_BURST_MASK 
+#define DDRC_RFSHCTL0_REFRESH_BURST_DEFVAL                                         0x00210000
+#define DDRC_RFSHCTL0_REFRESH_BURST_SHIFT                                          4
+#define DDRC_RFSHCTL0_REFRESH_BURST_MASK                                           0x000001F0U
+
+/*- 1 - Per bank refresh; - 0 - All bank refresh. Per bank refresh allows traffic to flow to other banks. Per bank refresh is n
+		t supported by all LPDDR2 devices but should be supported by all LPDDR3/LPDDR4 devices. Present only in designs configured to
+		support LPDDR2/LPDDR3/LPDDR4*/
+#undef DDRC_RFSHCTL0_PER_BANK_REFRESH_DEFVAL 
+#undef DDRC_RFSHCTL0_PER_BANK_REFRESH_SHIFT 
+#undef DDRC_RFSHCTL0_PER_BANK_REFRESH_MASK 
+#define DDRC_RFSHCTL0_PER_BANK_REFRESH_DEFVAL                                      0x00210000
+#define DDRC_RFSHCTL0_PER_BANK_REFRESH_SHIFT                                       2
+#define DDRC_RFSHCTL0_PER_BANK_REFRESH_MASK                                        0x00000004U
+
+/*Fine Granularity Refresh Mode - 000 - Fixed 1x (Normal mode) - 001 - Fixed 2x - 010 - Fixed 4x - 101 - Enable on the fly 2x (
+		ot supported) - 110 - Enable on the fly 4x (not supported) - Everything else - reserved Note: The on-the-fly modes is not sup
+		orted in this version of the uMCTL2. Note: This must be set up while the Controller is in reset or while the Controller is in
+		self-refresh mode. Changing this during normal operation is not allowed. Making this a dynamic register will be supported in 
+		uture version of the uMCTL2.*/
+#undef DDRC_RFSHCTL3_REFRESH_MODE_DEFVAL 
+#undef DDRC_RFSHCTL3_REFRESH_MODE_SHIFT 
+#undef DDRC_RFSHCTL3_REFRESH_MODE_MASK 
+#define DDRC_RFSHCTL3_REFRESH_MODE_DEFVAL                                          0x00000000
+#define DDRC_RFSHCTL3_REFRESH_MODE_SHIFT                                           4
+#define DDRC_RFSHCTL3_REFRESH_MODE_MASK                                            0x00000070U
+
+/*Toggle this signal (either from 0 to 1 or from 1 to 0) to indicate that the refresh register(s) have been updated. The value 
+		s automatically updated when exiting reset, so it does not need to be toggled initially.*/
+#undef DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_DEFVAL 
+#undef DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_SHIFT 
+#undef DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_MASK 
+#define DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_DEFVAL                                  0x00000000
+#define DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_SHIFT                                   1
+#define DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_MASK                                    0x00000002U
+
+/*When '1', disable auto-refresh generated by the uMCTL2. When auto-refresh is disabled, the SoC core must generate refreshes u
+		ing the registers reg_ddrc_rank0_refresh, reg_ddrc_rank1_refresh, reg_ddrc_rank2_refresh and reg_ddrc_rank3_refresh. When dis
+		auto_refresh transitions from 0 to 1, any pending refreshes are immediately scheduled by the uMCTL2. If DDR4 CRC/parity retry
+		is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), disable auto-refresh is not supported, and this bit must be set to '0'. 
+		his register field is changeable on the fly.*/
+#undef DDRC_RFSHCTL3_DIS_AUTO_REFRESH_DEFVAL 
+#undef DDRC_RFSHCTL3_DIS_AUTO_REFRESH_SHIFT 
+#undef DDRC_RFSHCTL3_DIS_AUTO_REFRESH_MASK 
+#define DDRC_RFSHCTL3_DIS_AUTO_REFRESH_DEFVAL                                      0x00000000
+#define DDRC_RFSHCTL3_DIS_AUTO_REFRESH_SHIFT                                       0
+#define DDRC_RFSHCTL3_DIS_AUTO_REFRESH_MASK                                        0x00000001U
+
+/*tREFI: Average time interval between refreshes per rank (Specification: 7.8us for DDR2, DDR3 and DDR4. See JEDEC specificatio
+		 for mDDR, LPDDR2, LPDDR3 and LPDDR4). For LPDDR2/LPDDR3/LPDDR4: - if using all-bank refreshes (RFSHCTL0.per_bank_refresh = 0
+		, this register should be set to tREFIab - if using per-bank refreshes (RFSHCTL0.per_bank_refresh = 1), this register should 
+		e set to tREFIpb For configurations with MEMC_FREQ_RATIO=2, program this to (tREFI/2), no rounding up. In DDR4 mode, tREFI va
+		ue is different depending on the refresh mode. The user should program the appropriate value from the spec based on the value
+		programmed in the refresh mode register. Note that RFSHTMG.t_rfc_nom_x32 * 32 must be greater than RFSHTMG.t_rfc_min, and RFS
+		TMG.t_rfc_nom_x32 must be greater than 0x1. Unit: Multiples of 32 clocks.*/
+#undef DDRC_RFSHTMG_T_RFC_NOM_X32_DEFVAL 
+#undef DDRC_RFSHTMG_T_RFC_NOM_X32_SHIFT 
+#undef DDRC_RFSHTMG_T_RFC_NOM_X32_MASK 
+#define DDRC_RFSHTMG_T_RFC_NOM_X32_DEFVAL                                          0x0062008C
+#define DDRC_RFSHTMG_T_RFC_NOM_X32_SHIFT                                           16
+#define DDRC_RFSHTMG_T_RFC_NOM_X32_MASK                                            0x0FFF0000U
+
+/*Used only when LPDDR3 memory type is connected. Should only be changed when uMCTL2 is in reset. Specifies whether to use the 
+		REFBW parameter (required by some LPDDR3 devices which comply with earlier versions of the LPDDR3 JEDEC specification) or not
+		 - 0 - tREFBW parameter not used - 1 - tREFBW parameter used*/
+#undef DDRC_RFSHTMG_LPDDR3_TREFBW_EN_DEFVAL 
+#undef DDRC_RFSHTMG_LPDDR3_TREFBW_EN_SHIFT 
+#undef DDRC_RFSHTMG_LPDDR3_TREFBW_EN_MASK 
+#define DDRC_RFSHTMG_LPDDR3_TREFBW_EN_DEFVAL                                       0x0062008C
+#define DDRC_RFSHTMG_LPDDR3_TREFBW_EN_SHIFT                                        15
+#define DDRC_RFSHTMG_LPDDR3_TREFBW_EN_MASK                                         0x00008000U
+
+/*tRFC (min): Minimum time from refresh to refresh or activate. For MEMC_FREQ_RATIO=1 configurations, t_rfc_min should be set t
+		 RoundUp(tRFCmin/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rfc_min should be set to RoundUp(RoundUp(tRFCmin/tCK)/2). In L
+		DDR2/LPDDR3/LPDDR4 mode: - if using all-bank refreshes, the tRFCmin value in the above equations is equal to tRFCab - if usin
+		 per-bank refreshes, the tRFCmin value in the above equations is equal to tRFCpb In DDR4 mode, the tRFCmin value in the above
+		equations is different depending on the refresh mode (fixed 1X,2X,4X) and the device density. The user should program the app
+		opriate value from the spec based on the 'refresh_mode' and the device density that is used. Unit: Clocks.*/
+#undef DDRC_RFSHTMG_T_RFC_MIN_DEFVAL 
+#undef DDRC_RFSHTMG_T_RFC_MIN_SHIFT 
+#undef DDRC_RFSHTMG_T_RFC_MIN_MASK 
+#define DDRC_RFSHTMG_T_RFC_MIN_DEFVAL                                              0x0062008C
+#define DDRC_RFSHTMG_T_RFC_MIN_SHIFT                                               0
+#define DDRC_RFSHTMG_T_RFC_MIN_MASK                                                0x000003FFU
+
+/*Disable ECC scrubs. Valid only when ECCCFG0.ecc_mode = 3'b100 and MEMC_USE_RMW is defined*/
+#undef DDRC_ECCCFG0_DIS_SCRUB_DEFVAL 
+#undef DDRC_ECCCFG0_DIS_SCRUB_SHIFT 
+#undef DDRC_ECCCFG0_DIS_SCRUB_MASK 
+#define DDRC_ECCCFG0_DIS_SCRUB_DEFVAL                                              0x00000000
+#define DDRC_ECCCFG0_DIS_SCRUB_SHIFT                                               4
+#define DDRC_ECCCFG0_DIS_SCRUB_MASK                                                0x00000010U
+
+/*ECC mode indicator - 000 - ECC disabled - 100 - ECC enabled - SEC/DED over 1 beat - all other settings are reserved for futur
+		 use*/
+#undef DDRC_ECCCFG0_ECC_MODE_DEFVAL 
+#undef DDRC_ECCCFG0_ECC_MODE_SHIFT 
+#undef DDRC_ECCCFG0_ECC_MODE_MASK 
+#define DDRC_ECCCFG0_ECC_MODE_DEFVAL                                               0x00000000
+#define DDRC_ECCCFG0_ECC_MODE_SHIFT                                                0
+#define DDRC_ECCCFG0_ECC_MODE_MASK                                                 0x00000007U
+
+/*Selects whether to poison 1 or 2 bits - if 0 -> 2-bit (uncorrectable) data poisoning, if 1 -> 1-bit (correctable) data poison
+		ng, if ECCCFG1.data_poison_en=1*/
+#undef DDRC_ECCCFG1_DATA_POISON_BIT_DEFVAL 
+#undef DDRC_ECCCFG1_DATA_POISON_BIT_SHIFT 
+#undef DDRC_ECCCFG1_DATA_POISON_BIT_MASK 
+#define DDRC_ECCCFG1_DATA_POISON_BIT_DEFVAL                                        0x00000000
+#define DDRC_ECCCFG1_DATA_POISON_BIT_SHIFT                                         1
+#define DDRC_ECCCFG1_DATA_POISON_BIT_MASK                                          0x00000002U
+
+/*Enable ECC data poisoning - introduces ECC errors on writes to address specified by the ECCPOISONADDR0/1 registers*/
+#undef DDRC_ECCCFG1_DATA_POISON_EN_DEFVAL 
+#undef DDRC_ECCCFG1_DATA_POISON_EN_SHIFT 
+#undef DDRC_ECCCFG1_DATA_POISON_EN_MASK 
+#define DDRC_ECCCFG1_DATA_POISON_EN_DEFVAL                                         0x00000000
+#define DDRC_ECCCFG1_DATA_POISON_EN_SHIFT                                          0
+#define DDRC_ECCCFG1_DATA_POISON_EN_MASK                                           0x00000001U
+
+/*The maximum number of DFI PHY clock cycles allowed from the assertion of the dfi_rddata_en signal to the assertion of each of
+		the corresponding bits of the dfi_rddata_valid signal. This corresponds to the DFI timing parameter tphy_rdlat. Refer to PHY 
+		pecification for correct value. This value it only used for detecting read data timeout when DDR4 retry is enabled by CRCPARC
+		L1.crc_parity_retry_enable=1. Maximum supported value: - 1:1 Frequency mode : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_
+		dlat < 'd114 - 1:2 Frequency mode ANDAND DFITMG0.dfi_rddata_use_sdr == 1 : CRCPARCTL1.dfi_t_phy_rdlat < 64 - 1:2 Frequency mo
+		e ANDAND DFITMG0.dfi_rddata_use_sdr == 0 : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_rdlat < 'd114 Unit: DFI Clocks*/
+#undef DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_DEFVAL 
+#undef DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_SHIFT 
+#undef DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_MASK 
+#define DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_DEFVAL                                     0x10000200
+#define DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_SHIFT                                      24
+#define DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_MASK                                       0x3F000000U
+
+/*After a Parity or CRC error is flagged on dfi_alert_n signal, the software has an option to read the mode registers in the DR
+		M before the hardware begins the retry process - 1: Wait for software to read/write the mode registers before hardware begins
+		the retry. After software is done with its operations, it will clear the alert interrupt register bit - 0: Hardware can begin
+		the retry right away after the dfi_alert_n pulse goes away. The value on this register is valid only when retry is enabled (P
+		RCTRL.crc_parity_retry_enable = 1) If this register is set to 1 and if the software doesn't clear the interrupt register afte
+		 handling the parity/CRC error, then the hardware will not begin the retry process and the system will hang. In the case of P
+		rity/CRC error, there are two possibilities when the software doesn't reset MR5[4] to 0. - (i) If 'Persistent parity' mode re
+		ister bit is NOT set: the commands sent during retry and normal operation are executed without parity checking. The value in 
+		he Parity error log register MPR Page 1 is valid. - (ii) If 'Persistent parity' mode register bit is SET: Parity checking is 
+		one for commands sent during retry and normal operation. If multiple errors occur before MR5[4] is cleared, the error log in 
+		PR Page 1 should be treated as 'Don't care'.*/
+#undef DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_DEFVAL 
+#undef DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_SHIFT 
+#undef DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_MASK 
+#define DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_DEFVAL                                   0x10000200
+#define DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_SHIFT                                    9
+#define DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_MASK                                     0x00000200U
+
+/*- 1: Enable command retry mechanism in case of C/A Parity or CRC error - 0: Disable command retry mechanism when C/A Parity o
+		 CRC features are enabled. Note that retry functionality is not supported if burst chop is enabled (MSTR.burstchop = 1) and/o
+		 disable auto-refresh is enabled (RFSHCTL3.dis_auto_refresh = 1)*/
+#undef DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_DEFVAL 
+#undef DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_SHIFT 
+#undef DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_MASK 
+#define DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_DEFVAL                             0x10000200
+#define DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_SHIFT                              8
+#define DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_MASK                               0x00000100U
+
+/*CRC Calculation setting register - 1: CRC includes DM signal - 0: CRC not includes DM signal Present only in designs configur
+		d to support DDR4.*/
+#undef DDRC_CRCPARCTL1_CRC_INC_DM_DEFVAL 
+#undef DDRC_CRCPARCTL1_CRC_INC_DM_SHIFT 
+#undef DDRC_CRCPARCTL1_CRC_INC_DM_MASK 
+#define DDRC_CRCPARCTL1_CRC_INC_DM_DEFVAL                                          0x10000200
+#define DDRC_CRCPARCTL1_CRC_INC_DM_SHIFT                                           7
+#define DDRC_CRCPARCTL1_CRC_INC_DM_MASK                                            0x00000080U
+
+/*CRC enable Register - 1: Enable generation of CRC - 0: Disable generation of CRC The setting of this register should match th
+		 CRC mode register setting in the DRAM.*/
+#undef DDRC_CRCPARCTL1_CRC_ENABLE_DEFVAL 
+#undef DDRC_CRCPARCTL1_CRC_ENABLE_SHIFT 
+#undef DDRC_CRCPARCTL1_CRC_ENABLE_MASK 
+#define DDRC_CRCPARCTL1_CRC_ENABLE_DEFVAL                                          0x10000200
+#define DDRC_CRCPARCTL1_CRC_ENABLE_SHIFT                                           4
+#define DDRC_CRCPARCTL1_CRC_ENABLE_MASK                                            0x00000010U
+
+/*C/A Parity enable register - 1: Enable generation of C/A parity and detection of C/A parity error - 0: Disable generation of 
+		/A parity and disable detection of C/A parity error If RCD's parity error detection or SDRAM's parity detection is enabled, t
+		is register should be 1.*/
+#undef DDRC_CRCPARCTL1_PARITY_ENABLE_DEFVAL 
+#undef DDRC_CRCPARCTL1_PARITY_ENABLE_SHIFT 
+#undef DDRC_CRCPARCTL1_PARITY_ENABLE_MASK 
+#define DDRC_CRCPARCTL1_PARITY_ENABLE_DEFVAL                                       0x10000200
+#define DDRC_CRCPARCTL1_PARITY_ENABLE_SHIFT                                        0
+#define DDRC_CRCPARCTL1_PARITY_ENABLE_MASK                                         0x00000001U
+
+/*Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a parity error occurs. Recommended values
+		 - tPAR_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tPAR_ALERT_PW.MAX/2 and round up to next inte
+		er value. Values of 0, 1 and 2 are illegal. This value must be greater than CRCPARCTL2.t_crc_alert_pw_max.*/
+#undef DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_DEFVAL 
+#undef DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_SHIFT 
+#undef DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_MASK 
+#define DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_DEFVAL                                  0x0030050C
+#define DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_SHIFT                                   16
+#define DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_MASK                                    0x01FF0000U
+
+/*Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a CRC error occurs. Recommended values: -
+		tCRC_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tCRC_ALERT_PW.MAX/2 and round up to next integer
+		value. Values of 0, 1 and 2 are illegal. This value must be less than CRCPARCTL2.t_par_alert_pw_max.*/
+#undef DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_DEFVAL 
+#undef DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_SHIFT 
+#undef DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_MASK 
+#define DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_DEFVAL                                  0x0030050C
+#define DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_SHIFT                                   8
+#define DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_MASK                                    0x00001F00U
+
+/*Indicates the maximum duration in number of DRAM clock cycles for which a command should be held in the Command Retry FIFO be
+		ore it is popped out. Every location in the Command Retry FIFO has an associated down counting timer that will use this regis
+		er as the start value. The down counting starts when a command is loaded into the FIFO. The timer counts down every 4 DRAM cy
+		les. When the counter reaches zero, the entry is popped from the FIFO. All the counters are frozen, if a C/A Parity or CRC er
+		or occurs before the counter reaches zero. The counter is reset to 0, after all the commands in the FIFO are retried. Recomme
+		ded(minimum) values: - Only C/A Parity is enabled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + tPAR_ALERT_ON
+		max + tPAR_UNKNOWN + PHY Alert Latency(DRAM CLK) + board delay) / 4) + 2 - Both C/A Parity and CRC is enabled/ Only CRC is en
+		bled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + WL + 5(BL10)+ tCRC_ALERT.max + PHY Alert Latency(DRAM CLK)
+		+ board delay) / 4) + 2 Note 1: All value (e.g. tPAR_ALERT_ON) should be in terms of DRAM Clock and round up Note 2: Board de
+		ay(Command/Alert_n) should be considered. Note 3: Use the worst case(longer) value for PHY Latencies/Board delay Note 4: The 
+		ecommended values are minimum value to be set. For mode detail, See 'Calculation of FIFO Depth' section. Max value can be set
+		to this register is defined below: - MEMC_BURST_LENGTH == 16 Full bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-
+		 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Half bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_D
+		PTH-4 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-6 Quarter bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CM
+		_FIFO_DEPTH-8 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-12 - MEMC_BURST_LENGTH != 16 Full bus Mode (C
+		C=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-1 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mo
+		e (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Quarte
+		 bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-4 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEP
+		H-6 Values of 0, 1 and 2 are illegal.*/
+#undef DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_DEFVAL 
+#undef DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_SHIFT 
+#undef DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_MASK 
+#define DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_DEFVAL                        0x0030050C
+#define DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_SHIFT                         0
+#define DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_MASK                          0x0000003FU
+
+/*If lower bit is enabled the SDRAM initialization routine is skipped. The upper bit decides what state the controller starts u
+		 in when reset is removed - 00 - SDRAM Intialization routine is run after power-up - 01 - SDRAM Intialization routine is skip
+		ed after power-up. Controller starts up in Normal Mode - 11 - SDRAM Intialization routine is skipped after power-up. Controll
+		r starts up in Self-refresh Mode - 10 - SDRAM Intialization routine is run after power-up. Note: The only 2'b00 is supported 
+		or LPDDR4 in this version of the uMCTL2.*/
+#undef DDRC_INIT0_SKIP_DRAM_INIT_DEFVAL 
+#undef DDRC_INIT0_SKIP_DRAM_INIT_SHIFT 
+#undef DDRC_INIT0_SKIP_DRAM_INIT_MASK 
+#define DDRC_INIT0_SKIP_DRAM_INIT_DEFVAL                                           0x0002004E
+#define DDRC_INIT0_SKIP_DRAM_INIT_SHIFT                                            30
+#define DDRC_INIT0_SKIP_DRAM_INIT_MASK                                             0xC0000000U
+
+/*Cycles to wait after driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clocks. DDR2 typically requires 
+		 400 ns delay, requiring this value to be programmed to 2 at all clock speeds. LPDDR2/LPDDR3 typically requires this to be pr
+		grammed for a delay of 200 us. LPDDR4 typically requires this to be programmed for a delay of 2 us. For configurations with M
+		MC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it up to next integer value.*/
+#undef DDRC_INIT0_POST_CKE_X1024_DEFVAL 
+#undef DDRC_INIT0_POST_CKE_X1024_SHIFT 
+#undef DDRC_INIT0_POST_CKE_X1024_MASK 
+#define DDRC_INIT0_POST_CKE_X1024_DEFVAL                                           0x0002004E
+#define DDRC_INIT0_POST_CKE_X1024_SHIFT                                            16
+#define DDRC_INIT0_POST_CKE_X1024_MASK                                             0x03FF0000U
+
+/*Cycles to wait after reset before driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clock cycles. DDR2 
+		pecifications typically require this to be programmed for a delay of >= 200 us. LPDDR2/LPDDR3: tINIT1 of 100 ns (min) LPDDR4:
+		tINIT3 of 2 ms (min) For configurations with MEMC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it u
+		 to next integer value.*/
+#undef DDRC_INIT0_PRE_CKE_X1024_DEFVAL 
+#undef DDRC_INIT0_PRE_CKE_X1024_SHIFT 
+#undef DDRC_INIT0_PRE_CKE_X1024_MASK 
+#define DDRC_INIT0_PRE_CKE_X1024_DEFVAL                                            0x0002004E
+#define DDRC_INIT0_PRE_CKE_X1024_SHIFT                                             0
+#define DDRC_INIT0_PRE_CKE_X1024_MASK                                              0x00000FFFU
+
+/*Number of cycles to assert SDRAM reset signal during init sequence. This is only present for designs supporting DDR3, DDR4 or
+		LPDDR4 devices. For use with a DDR PHY, this should be set to a minimum of 1*/
+#undef DDRC_INIT1_DRAM_RSTN_X1024_DEFVAL 
+#undef DDRC_INIT1_DRAM_RSTN_X1024_SHIFT 
+#undef DDRC_INIT1_DRAM_RSTN_X1024_MASK 
+#define DDRC_INIT1_DRAM_RSTN_X1024_DEFVAL                                          0x00000000
+#define DDRC_INIT1_DRAM_RSTN_X1024_SHIFT                                           16
+#define DDRC_INIT1_DRAM_RSTN_X1024_MASK                                            0x01FF0000U
+
+/*Cycles to wait after completing the SDRAM initialization sequence before starting the dynamic scheduler. Unit: Counts of a gl
+		bal timer that pulses every 32 clock cycles. There is no known specific requirement for this; it may be set to zero.*/
+#undef DDRC_INIT1_FINAL_WAIT_X32_DEFVAL 
+#undef DDRC_INIT1_FINAL_WAIT_X32_SHIFT 
+#undef DDRC_INIT1_FINAL_WAIT_X32_MASK 
+#define DDRC_INIT1_FINAL_WAIT_X32_DEFVAL                                           0x00000000
+#define DDRC_INIT1_FINAL_WAIT_X32_SHIFT                                            8
+#define DDRC_INIT1_FINAL_WAIT_X32_MASK                                             0x00007F00U
+
+/*Wait period before driving the OCD complete command to SDRAM. Unit: Counts of a global timer that pulses every 32 clock cycle
+		. There is no known specific requirement for this; it may be set to zero.*/
+#undef DDRC_INIT1_PRE_OCD_X32_DEFVAL 
+#undef DDRC_INIT1_PRE_OCD_X32_SHIFT 
+#undef DDRC_INIT1_PRE_OCD_X32_MASK 
+#define DDRC_INIT1_PRE_OCD_X32_DEFVAL                                              0x00000000
+#define DDRC_INIT1_PRE_OCD_X32_SHIFT                                               0
+#define DDRC_INIT1_PRE_OCD_X32_MASK                                                0x0000000FU
+
+/*Idle time after the reset command, tINIT4. Present only in designs configured to support LPDDR2. Unit: 32 clock cycles.*/
+#undef DDRC_INIT2_IDLE_AFTER_RESET_X32_DEFVAL 
+#undef DDRC_INIT2_IDLE_AFTER_RESET_X32_SHIFT 
+#undef DDRC_INIT2_IDLE_AFTER_RESET_X32_MASK 
+#define DDRC_INIT2_IDLE_AFTER_RESET_X32_DEFVAL                                     0x00000D05
+#define DDRC_INIT2_IDLE_AFTER_RESET_X32_SHIFT                                      8
+#define DDRC_INIT2_IDLE_AFTER_RESET_X32_MASK                                       0x0000FF00U
+
+/*Time to wait after the first CKE high, tINIT2. Present only in designs configured to support LPDDR2/LPDDR3. Unit: 1 clock cyc
+		e. LPDDR2/LPDDR3 typically requires 5 x tCK delay.*/
+#undef DDRC_INIT2_MIN_STABLE_CLOCK_X1_DEFVAL 
+#undef DDRC_INIT2_MIN_STABLE_CLOCK_X1_SHIFT 
+#undef DDRC_INIT2_MIN_STABLE_CLOCK_X1_MASK 
+#define DDRC_INIT2_MIN_STABLE_CLOCK_X1_DEFVAL                                      0x00000D05
+#define DDRC_INIT2_MIN_STABLE_CLOCK_X1_SHIFT                                       0
+#define DDRC_INIT2_MIN_STABLE_CLOCK_X1_MASK                                        0x0000000FU
+
+/*DDR2: Value to write to MR register. Bit 8 is for DLL and the setting here is ignored. The uMCTL2 sets this bit appropriately
+		 DDR3/DDR4: Value loaded into MR0 register. mDDR: Value to write to MR register. LPDDR2/LPDDR3/LPDDR4 - Value to write to MR1
+		register*/
+#undef DDRC_INIT3_MR_DEFVAL 
+#undef DDRC_INIT3_MR_SHIFT 
+#undef DDRC_INIT3_MR_MASK 
+#define DDRC_INIT3_MR_DEFVAL                                                       0x00000510
+#define DDRC_INIT3_MR_SHIFT                                                        16
+#define DDRC_INIT3_MR_MASK                                                         0xFFFF0000U
+
+/*DDR2: Value to write to EMR register. Bits 9:7 are for OCD and the setting in this register is ignored. The uMCTL2 sets those
+		bits appropriately. DDR3/DDR4: Value to write to MR1 register Set bit 7 to 0. If PHY-evaluation mode training is enabled, thi
+		 bit is set appropriately by the uMCTL2 during write leveling. mDDR: Value to write to EMR register. LPDDR2/LPDDR3/LPDDR4 - V
+		lue to write to MR2 register*/
+#undef DDRC_INIT3_EMR_DEFVAL 
+#undef DDRC_INIT3_EMR_SHIFT 
+#undef DDRC_INIT3_EMR_MASK 
+#define DDRC_INIT3_EMR_DEFVAL                                                      0x00000510
+#define DDRC_INIT3_EMR_SHIFT                                                       0
+#define DDRC_INIT3_EMR_MASK                                                        0x0000FFFFU
+
+/*DDR2: Value to write to EMR2 register. DDR3/DDR4: Value to write to MR2 register LPDDR2/LPDDR3/LPDDR4: Value to write to MR3 
+		egister mDDR: Unused*/
+#undef DDRC_INIT4_EMR2_DEFVAL 
+#undef DDRC_INIT4_EMR2_SHIFT 
+#undef DDRC_INIT4_EMR2_MASK 
+#define DDRC_INIT4_EMR2_DEFVAL                                                     0x00000000
+#define DDRC_INIT4_EMR2_SHIFT                                                      16
+#define DDRC_INIT4_EMR2_MASK                                                       0xFFFF0000U
+
+/*DDR2: Value to write to EMR3 register. DDR3/DDR4: Value to write to MR3 register mDDR/LPDDR2/LPDDR3: Unused LPDDR4: Value to 
+		rite to MR13 register*/
+#undef DDRC_INIT4_EMR3_DEFVAL 
+#undef DDRC_INIT4_EMR3_SHIFT 
+#undef DDRC_INIT4_EMR3_MASK 
+#define DDRC_INIT4_EMR3_DEFVAL                                                     0x00000000
+#define DDRC_INIT4_EMR3_SHIFT                                                      0
+#define DDRC_INIT4_EMR3_MASK                                                       0x0000FFFFU
+
+/*ZQ initial calibration, tZQINIT. Present only in designs configured to support DDR3 or DDR4 or LPDDR2/LPDDR3. Unit: 32 clock 
+		ycles. DDR3 typically requires 512 clocks. DDR4 requires 1024 clocks. LPDDR2/LPDDR3 requires 1 us.*/
+#undef DDRC_INIT5_DEV_ZQINIT_X32_DEFVAL 
+#undef DDRC_INIT5_DEV_ZQINIT_X32_SHIFT 
+#undef DDRC_INIT5_DEV_ZQINIT_X32_MASK 
+#define DDRC_INIT5_DEV_ZQINIT_X32_DEFVAL                                           0x00100004
+#define DDRC_INIT5_DEV_ZQINIT_X32_SHIFT                                            16
+#define DDRC_INIT5_DEV_ZQINIT_X32_MASK                                             0x00FF0000U
+
+/*Maximum duration of the auto initialization, tINIT5. Present only in designs configured to support LPDDR2/LPDDR3. LPDDR2/LPDD
+		3 typically requires 10 us.*/
+#undef DDRC_INIT5_MAX_AUTO_INIT_X1024_DEFVAL 
+#undef DDRC_INIT5_MAX_AUTO_INIT_X1024_SHIFT 
+#undef DDRC_INIT5_MAX_AUTO_INIT_X1024_MASK 
+#define DDRC_INIT5_MAX_AUTO_INIT_X1024_DEFVAL                                      0x00100004
+#define DDRC_INIT5_MAX_AUTO_INIT_X1024_SHIFT                                       0
+#define DDRC_INIT5_MAX_AUTO_INIT_X1024_MASK                                        0x000003FFU
+
+/*DDR4- Value to be loaded into SDRAM MR4 registers. Used in DDR4 designs only.*/
+#undef DDRC_INIT6_MR4_DEFVAL 
+#undef DDRC_INIT6_MR4_SHIFT 
+#undef DDRC_INIT6_MR4_MASK 
+#define DDRC_INIT6_MR4_DEFVAL                                                      0x00000000
+#define DDRC_INIT6_MR4_SHIFT                                                       16
+#define DDRC_INIT6_MR4_MASK                                                        0xFFFF0000U
+
+/*DDR4- Value to be loaded into SDRAM MR5 registers. Used in DDR4 designs only.*/
+#undef DDRC_INIT6_MR5_DEFVAL 
+#undef DDRC_INIT6_MR5_SHIFT 
+#undef DDRC_INIT6_MR5_MASK 
+#define DDRC_INIT6_MR5_DEFVAL                                                      0x00000000
+#define DDRC_INIT6_MR5_SHIFT                                                       0
+#define DDRC_INIT6_MR5_MASK                                                        0x0000FFFFU
+
+/*DDR4- Value to be loaded into SDRAM MR6 registers. Used in DDR4 designs only.*/
+#undef DDRC_INIT7_MR6_DEFVAL 
+#undef DDRC_INIT7_MR6_SHIFT 
+#undef DDRC_INIT7_MR6_MASK 
+#define DDRC_INIT7_MR6_DEFVAL                                                      
+#define DDRC_INIT7_MR6_SHIFT                                                       16
+#define DDRC_INIT7_MR6_MASK                                                        0xFFFF0000U
+
+/*Disabling Address Mirroring for BG bits. When this is set to 1, BG0 and BG1 are NOT swapped even if Address Mirroring is enab
+		ed. This will be required for DDR4 DIMMs with x16 devices. - 1 - BG0 and BG1 are NOT swapped. - 0 - BG0 and BG1 are swapped i
+		 address mirroring is enabled.*/
+#undef DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_MASK 
+#define DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_DEFVAL                                  0x00000000
+#define DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_SHIFT                                   5
+#define DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_MASK                                    0x00000020U
+
+/*Enable for BG1 bit of MRS command. BG1 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have BG1 are attached and both the CA parity and the Output 
+		nversion are enabled, this must be set to 0, so that the calculation of CA parity will not include BG1 bit. Note: This has no
+		effect on the address of any other memory accesses, or of software-driven mode register accesses. If address mirroring is ena
+		led, this is applied to BG1 of even ranks and BG0 of odd ranks. - 1 - Enabled - 0 - Disabled*/
+#undef DDRC_DIMMCTL_MRS_BG1_EN_DEFVAL 
+#undef DDRC_DIMMCTL_MRS_BG1_EN_SHIFT 
+#undef DDRC_DIMMCTL_MRS_BG1_EN_MASK 
+#define DDRC_DIMMCTL_MRS_BG1_EN_DEFVAL                                             0x00000000
+#define DDRC_DIMMCTL_MRS_BG1_EN_SHIFT                                              4
+#define DDRC_DIMMCTL_MRS_BG1_EN_MASK                                               0x00000010U
+
+/*Enable for A17 bit of MRS command. A17 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have A17 are attached and the Output Inversion are enabled, 
+		his must be set to 0, so that the calculation of CA parity will not include A17 bit. Note: This has no effect on the address 
+		f any other memory accesses, or of software-driven mode register accesses. - 1 - Enabled - 0 - Disabled*/
+#undef DDRC_DIMMCTL_MRS_A17_EN_DEFVAL 
+#undef DDRC_DIMMCTL_MRS_A17_EN_SHIFT 
+#undef DDRC_DIMMCTL_MRS_A17_EN_MASK 
+#define DDRC_DIMMCTL_MRS_A17_EN_DEFVAL                                             0x00000000
+#define DDRC_DIMMCTL_MRS_A17_EN_SHIFT                                              3
+#define DDRC_DIMMCTL_MRS_A17_EN_MASK                                               0x00000008U
+
+/*Output Inversion Enable (for DDR4 RDIMM implementations only). DDR4 RDIMM implements the Output Inversion feature by default,
+		which means that the following address, bank address and bank group bits of B-side DRAMs are inverted: A3-A9, A11, A13, A17, 
+		A0-BA1, BG0-BG1. Setting this bit ensures that, for mode register accesses generated by the uMCTL2 during the automatic initi
+		lization routine and enabling of a particular DDR4 feature, separate A-side and B-side mode register accesses are generated. 
+		or B-side mode register accesses, these bits are inverted within the uMCTL2 to compensate for this RDIMM inversion. Note: Thi
+		 has no effect on the address of any other memory accesses, or of software-driven mode register accesses. - 1 - Implement out
+		ut inversion for B-side DRAMs. - 0 - Do not implement output inversion for B-side DRAMs.*/
+#undef DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_MASK 
+#define DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_DEFVAL                                     0x00000000
+#define DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_SHIFT                                      2
+#define DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_MASK                                       0x00000004U
+
+/*Address Mirroring Enable (for multi-rank UDIMM implementations and multi-rank DDR4 RDIMM implementations). Some UDIMMs and DD
+		4 RDIMMs implement address mirroring for odd ranks, which means that the following address, bank address and bank group bits 
+		re swapped: (A3, A4), (A5, A6), (A7, A8), (BA0, BA1) and also (A11, A13), (BG0, BG1) for the DDR4. Setting this bit ensures t
+		at, for mode register accesses during the automatic initialization routine, these bits are swapped within the uMCTL2 to compe
+		sate for this UDIMM/RDIMM swapping. In addition to the automatic initialization routine, in case of DDR4 UDIMM/RDIMM, they ar
+		 swapped during the automatic MRS access to enable/disable of a particular DDR4 feature. Note: This has no effect on the addr
+		ss of any other memory accesses, or of software-driven mode register accesses. This is not supported for mDDR, LPDDR2, LPDDR3
+		or LPDDR4 SDRAMs. Note: In case of x16 DDR4 DIMMs, BG1 output of MRS for the odd ranks is same as BG0 because BG1 is invalid,
+		hence dimm_dis_bg_mirroring register must be set to 1. - 1 - For odd ranks, implement address mirroring for MRS commands to d
+		ring initialization and for any automatic DDR4 MRS commands (to be used if UDIMM/RDIMM implements address mirroring) - 0 - Do
+		not implement address mirroring*/
+#undef DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_MASK 
+#define DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_DEFVAL                                      0x00000000
+#define DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_SHIFT                                       1
+#define DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_MASK                                        0x00000002U
+
+/*Staggering enable for multi-rank accesses (for multi-rank UDIMM and RDIMM implementations only). This is not supported for mD
+		R, LPDDR2, LPDDR3 or LPDDR4 SDRAMs. Note: Even if this bit is set it does not take care of software driven MR commands (via M
+		CTRL0/MRCTRL1), where software is responsible to send them to seperate ranks as appropriate. - 1 - (DDR4) Send MRS commands t
+		 each ranks seperately - 1 - (non-DDR4) Send all commands to even and odd ranks seperately - 0 - Do not stagger accesses*/
+#undef DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_MASK 
+#define DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_DEFVAL                                     0x00000000
+#define DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_SHIFT                                      0
+#define DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_MASK                                       0x00000001U
+
+/*Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e writes to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should c
+		nsider both PHY requirement and ODT requirement. - PHY requirement: tphy_wrcsgap + 1 (see PHY databook for value of tphy_wrcs
+		ap) If CRC feature is enabled, should be increased by 1. If write preamble is set to 2tCK(DDR4/LPDDR4 only), should be increa
+		ed by 1. If write postamble is set to 1.5tCK(LPDDR4 only), should be increased by 1. - ODT requirement: The value programmed 
+		n this register takes care of the ODT switch off timing requirement when switching ranks during writes. For LPDDR4, the requi
+		ement is ODTLoff - ODTLon - BL/2 + 1 For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY requirement
+		or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and round it u
+		 to the next integer.*/
+#undef DDRC_RANKCTL_DIFF_RANK_WR_GAP_DEFVAL 
+#undef DDRC_RANKCTL_DIFF_RANK_WR_GAP_SHIFT 
+#undef DDRC_RANKCTL_DIFF_RANK_WR_GAP_MASK 
+#define DDRC_RANKCTL_DIFF_RANK_WR_GAP_DEFVAL                                       0x0000066F
+#define DDRC_RANKCTL_DIFF_RANK_WR_GAP_SHIFT                                        8
+#define DDRC_RANKCTL_DIFF_RANK_WR_GAP_MASK                                         0x00000F00U
+
+/*Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e reads to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should co
+		sider both PHY requirement and ODT requirement. - PHY requirement: tphy_rdcsgap + 1 (see PHY databook for value of tphy_rdcsg
+		p) If read preamble is set to 2tCK(DDR4/LPDDR4 only), should be increased by 1. If read postamble is set to 1.5tCK(LPDDR4 onl
+		), should be increased by 1. - ODT requirement: The value programmed in this register takes care of the ODT switch off timing
+		requirement when switching ranks during reads. For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY r
+		quirement or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and 
+		ound it up to the next integer.*/
+#undef DDRC_RANKCTL_DIFF_RANK_RD_GAP_DEFVAL 
+#undef DDRC_RANKCTL_DIFF_RANK_RD_GAP_SHIFT 
+#undef DDRC_RANKCTL_DIFF_RANK_RD_GAP_MASK 
+#define DDRC_RANKCTL_DIFF_RANK_RD_GAP_DEFVAL                                       0x0000066F
+#define DDRC_RANKCTL_DIFF_RANK_RD_GAP_SHIFT                                        4
+#define DDRC_RANKCTL_DIFF_RANK_RD_GAP_MASK                                         0x000000F0U
+
+/*Only present for multi-rank configurations. Background: Reads to the same rank can be performed back-to-back. Reads to differ
+		nt ranks require additional gap dictated by the register RANKCTL.diff_rank_rd_gap. This is to avoid possible data bus content
+		on as well as to give PHY enough time to switch the delay when changing ranks. The uMCTL2 arbitrates for bus access on a cycl
+		-by-cycle basis; therefore after a read is scheduled, there are few clock cycles (determined by the value on RANKCTL.diff_ran
+		_rd_gap register) in which only reads from the same rank are eligible to be scheduled. This prevents reads from other ranks f
+		om having fair access to the data bus. This parameter represents the maximum number of reads that can be scheduled consecutiv
+		ly to the same rank. After this number is reached, a delay equal to RANKCTL.diff_rank_rd_gap is inserted by the scheduler to 
+		llow all ranks a fair opportunity to be scheduled. Higher numbers increase bandwidth utilization, lower numbers increase fair
+		ess. This feature can be DISABLED by setting this register to 0. When set to 0, the Controller will stay on the same rank as 
+		ong as commands are available for it. Minimum programmable value is 0 (feature disabled) and maximum programmable value is 0x
+		. FOR PERFORMANCE ONLY.*/
+#undef DDRC_RANKCTL_MAX_RANK_RD_DEFVAL 
+#undef DDRC_RANKCTL_MAX_RANK_RD_SHIFT 
+#undef DDRC_RANKCTL_MAX_RANK_RD_MASK 
+#define DDRC_RANKCTL_MAX_RANK_RD_DEFVAL                                            0x0000066F
+#define DDRC_RANKCTL_MAX_RANK_RD_SHIFT                                             0
+#define DDRC_RANKCTL_MAX_RANK_RD_MASK                                              0x0000000FU
+
+/*Minimum time between write and precharge to same bank. Unit: Clocks Specifications: WL + BL/2 + tWR = approximately 8 cycles 
+		 15 ns = 14 clocks @400MHz and less for lower frequencies where: - WL = write latency - BL = burst length. This must match th
+		 value programmed in the BL bit of the mode register to the SDRAM. BST (burst terminate) is not supported at present. - tWR =
+		Write recovery time. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 for this 
+		arameter. For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For configurations
+		with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer value.*/
+#undef DDRC_DRAMTMG0_WR2PRE_DEFVAL 
+#undef DDRC_DRAMTMG0_WR2PRE_SHIFT 
+#undef DDRC_DRAMTMG0_WR2PRE_MASK 
+#define DDRC_DRAMTMG0_WR2PRE_DEFVAL                                                0x0F101B0F
+#define DDRC_DRAMTMG0_WR2PRE_SHIFT                                                 24
+#define DDRC_DRAMTMG0_WR2PRE_MASK                                                  0x7F000000U
+
+/*tFAW Valid only when 8 or more banks(or banks x bank groups) are present. In 8-bank design, at most 4 banks must be activated
+		in a rolling window of tFAW cycles. For configurations with MEMC_FREQ_RATIO=2, program this to (tFAW/2) and round up to next 
+		nteger value. In a 4-bank design, set this register to 0x1 independent of the MEMC_FREQ_RATIO configuration. Unit: Clocks*/
+#undef DDRC_DRAMTMG0_T_FAW_DEFVAL 
+#undef DDRC_DRAMTMG0_T_FAW_SHIFT 
+#undef DDRC_DRAMTMG0_T_FAW_MASK 
+#define DDRC_DRAMTMG0_T_FAW_DEFVAL                                                 0x0F101B0F
+#define DDRC_DRAMTMG0_T_FAW_SHIFT                                                  16
+#define DDRC_DRAMTMG0_T_FAW_MASK                                                   0x003F0000U
+
+/*tRAS(max): Maximum time between activate and precharge to same bank. This is the maximum time that a page can be kept open Mi
+		imum value of this register is 1. Zero is invalid. For configurations with MEMC_FREQ_RATIO=2, program this to (tRAS(max)-1)/2
+		 No rounding up. Unit: Multiples of 1024 clocks.*/
+#undef DDRC_DRAMTMG0_T_RAS_MAX_DEFVAL 
+#undef DDRC_DRAMTMG0_T_RAS_MAX_SHIFT 
+#undef DDRC_DRAMTMG0_T_RAS_MAX_MASK 
+#define DDRC_DRAMTMG0_T_RAS_MAX_DEFVAL                                             0x0F101B0F
+#define DDRC_DRAMTMG0_T_RAS_MAX_SHIFT                                              8
+#define DDRC_DRAMTMG0_T_RAS_MAX_MASK                                               0x00007F00U
+
+/*tRAS(min): Minimum time between activate and precharge to the same bank. For configurations with MEMC_FREQ_RATIO=2, 1T mode, 
+		rogram this to tRAS(min)/2. No rounding up. For configurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, program this t
+		 (tRAS(min)/2) and round it up to the next integer value. Unit: Clocks*/
+#undef DDRC_DRAMTMG0_T_RAS_MIN_DEFVAL 
+#undef DDRC_DRAMTMG0_T_RAS_MIN_SHIFT 
+#undef DDRC_DRAMTMG0_T_RAS_MIN_MASK 
+#define DDRC_DRAMTMG0_T_RAS_MIN_DEFVAL                                             0x0F101B0F
+#define DDRC_DRAMTMG0_T_RAS_MIN_SHIFT                                              0
+#define DDRC_DRAMTMG0_T_RAS_MIN_MASK                                               0x0000003FU
+
+/*tXP: Minimum time after power-down exit to any operation. For DDR3, this should be programmed to tXPDLL if slow powerdown exi
+		 is selected in MR0[12]. If C/A parity for DDR4 is used, set to (tXP+PL) instead. For configurations with MEMC_FREQ_RATIO=2, 
+		rogram this to (tXP/2) and round it up to the next integer value. Units: Clocks*/
+#undef DDRC_DRAMTMG1_T_XP_DEFVAL 
+#undef DDRC_DRAMTMG1_T_XP_SHIFT 
+#undef DDRC_DRAMTMG1_T_XP_MASK 
+#define DDRC_DRAMTMG1_T_XP_DEFVAL                                                  0x00080414
+#define DDRC_DRAMTMG1_T_XP_SHIFT                                                   16
+#define DDRC_DRAMTMG1_T_XP_MASK                                                    0x001F0000U
+
+/*tRTP: Minimum time from read to precharge of same bank. - DDR2: tAL + BL/2 + max(tRTP, 2) - 2 - DDR3: tAL + max (tRTP, 4) - D
+		R4: Max of following two equations: tAL + max (tRTP, 4) or, RL + BL/2 - tRP. - mDDR: BL/2 - LPDDR2: Depends on if it's LPDDR2
+		S2 or LPDDR2-S4: LPDDR2-S2: BL/2 + tRTP - 1. LPDDR2-S4: BL/2 + max(tRTP,2) - 2. - LPDDR3: BL/2 + max(tRTP,4) - 4 - LPDDR4: BL
+		2 + max(tRTP,8) - 8 For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For conf
+		gurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer val
+		e. Unit: Clocks.*/
+#undef DDRC_DRAMTMG1_RD2PRE_DEFVAL 
+#undef DDRC_DRAMTMG1_RD2PRE_SHIFT 
+#undef DDRC_DRAMTMG1_RD2PRE_MASK 
+#define DDRC_DRAMTMG1_RD2PRE_DEFVAL                                                0x00080414
+#define DDRC_DRAMTMG1_RD2PRE_SHIFT                                                 8
+#define DDRC_DRAMTMG1_RD2PRE_MASK                                                  0x00001F00U
+
+/*tRC: Minimum time between activates to same bank. For configurations with MEMC_FREQ_RATIO=2, program this to (tRC/2) and roun
+		 up to next integer value. Unit: Clocks.*/
+#undef DDRC_DRAMTMG1_T_RC_DEFVAL 
+#undef DDRC_DRAMTMG1_T_RC_SHIFT 
+#undef DDRC_DRAMTMG1_T_RC_MASK 
+#define DDRC_DRAMTMG1_T_RC_DEFVAL                                                  0x00080414
+#define DDRC_DRAMTMG1_T_RC_SHIFT                                                   0
+#define DDRC_DRAMTMG1_T_RC_MASK                                                    0x0000007FU
+
+/*Set to WL Time from write command to write data on SDRAM interface. This must be set to WL. For mDDR, it should normally be s
+		t to 1. Note that, depending on the PHY, if using RDIMM, it may be necessary to use a value of WL + 1 to compensate for the e
+		tra cycle of latency through the RDIMM For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above
+		equation by 2, and round it up to next integer. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAININ
+		 is set), as the DFI read and write latencies defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks*/
+#undef DDRC_DRAMTMG2_WRITE_LATENCY_DEFVAL 
+#undef DDRC_DRAMTMG2_WRITE_LATENCY_SHIFT 
+#undef DDRC_DRAMTMG2_WRITE_LATENCY_MASK 
+#define DDRC_DRAMTMG2_WRITE_LATENCY_DEFVAL                                         0x0305060D
+#define DDRC_DRAMTMG2_WRITE_LATENCY_SHIFT                                          24
+#define DDRC_DRAMTMG2_WRITE_LATENCY_MASK                                           0x3F000000U
+
+/*Set to RL Time from read command to read data on SDRAM interface. This must be set to RL. Note that, depending on the PHY, if
+		using RDIMM, it mat be necessary to use a value of RL + 1 to compensate for the extra cycle of latency through the RDIMM For 
+		onfigurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next inte
+		er. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAINING is set), as the DFI read and write latenci
+		s defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks*/
+#undef DDRC_DRAMTMG2_READ_LATENCY_DEFVAL 
+#undef DDRC_DRAMTMG2_READ_LATENCY_SHIFT 
+#undef DDRC_DRAMTMG2_READ_LATENCY_MASK 
+#define DDRC_DRAMTMG2_READ_LATENCY_DEFVAL                                          0x0305060D
+#define DDRC_DRAMTMG2_READ_LATENCY_SHIFT                                           16
+#define DDRC_DRAMTMG2_READ_LATENCY_MASK                                            0x003F0000U
+
+/*DDR2/3/mDDR: RL + BL/2 + 2 - WL DDR4: RL + BL/2 + 1 + WR_PREAMBLE - WL LPDDR2/LPDDR3: RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL 
+		PDDR4(DQ ODT is Disabled): RL + BL/2 + RU(tDQSCKmax/tCK) + WR_PREAMBLE + RD_POSTAMBLE - WL LPDDR4(DQ ODT is Enabled) : RL + B
+		/2 + RU(tDQSCKmax/tCK) + RD_POSTAMBLE - ODTLon - RU(tODTon(min)/tCK) Minimum time from read command to write command. Include
+		time for bus turnaround and all per-bank, per-rank, and global constraints. Unit: Clocks. Where: - WL = write latency - BL = 
+		urst length. This must match the value programmed in the BL bit of the mode register to the SDRAM - RL = read latency = CAS l
+		tency - WR_PREAMBLE = write preamble. This is unique to DDR4 and LPDDR4. - RD_POSTAMBLE = read postamble. This is unique to L
+		DDR4. For LPDDR2/LPDDR3/LPDDR4, if derating is enabled (DERATEEN.derate_enable=1), derated tDQSCKmax should be used. For conf
+		gurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.*/
+#undef DDRC_DRAMTMG2_RD2WR_DEFVAL 
+#undef DDRC_DRAMTMG2_RD2WR_SHIFT 
+#undef DDRC_DRAMTMG2_RD2WR_MASK 
+#define DDRC_DRAMTMG2_RD2WR_DEFVAL                                                 0x0305060D
+#define DDRC_DRAMTMG2_RD2WR_SHIFT                                                  8
+#define DDRC_DRAMTMG2_RD2WR_MASK                                                   0x00003F00U
+
+/*DDR4: CWL + PL + BL/2 + tWTR_L Others: CWL + BL/2 + tWTR In DDR4, minimum time from write command to read command for same ba
+		k group. In others, minimum time from write command to read command. Includes time for bus turnaround, recovery times, and al
+		 per-bank, per-rank, and global constraints. Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burs
+		 length. This must match the value programmed in the BL bit of the mode register to the SDRAM - tWTR_L = internal write to re
+		d command delay for same bank group. This comes directly from the SDRAM specification. - tWTR = internal write to read comman
+		 delay. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 operation. For configu
+		ations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.*/
+#undef DDRC_DRAMTMG2_WR2RD_DEFVAL 
+#undef DDRC_DRAMTMG2_WR2RD_SHIFT 
+#undef DDRC_DRAMTMG2_WR2RD_MASK 
+#define DDRC_DRAMTMG2_WR2RD_DEFVAL                                                 0x0305060D
+#define DDRC_DRAMTMG2_WR2RD_SHIFT                                                  0
+#define DDRC_DRAMTMG2_WR2RD_MASK                                                   0x0000003FU
+
+/*Time to wait after a mode register write or read (MRW or MRR). Present only in designs configured to support LPDDR2, LPDDR3 o
+		 LPDDR4. LPDDR2 typically requires value of 5. LPDDR3 typically requires value of 10. LPDDR4: Set this to the larger of tMRW 
+		nd tMRWCKEL. For LPDDR2, this register is used for the time from a MRW/MRR to all other commands. For LDPDR3, this register i
+		 used for the time from a MRW/MRR to a MRW/MRR.*/
+#undef DDRC_DRAMTMG3_T_MRW_DEFVAL 
+#undef DDRC_DRAMTMG3_T_MRW_SHIFT 
+#undef DDRC_DRAMTMG3_T_MRW_MASK 
+#define DDRC_DRAMTMG3_T_MRW_DEFVAL                                                 0x0050400C
+#define DDRC_DRAMTMG3_T_MRW_SHIFT                                                  20
+#define DDRC_DRAMTMG3_T_MRW_MASK                                                   0x3FF00000U
+
+/*tMRD: Cycles to wait after a mode register write or read. Depending on the connected SDRAM, tMRD represents: DDR2/mDDR: Time 
+		rom MRS to any command DDR3/4: Time from MRS to MRS command LPDDR2: not used LPDDR3/4: Time from MRS to non-MRS command For c
+		nfigurations with MEMC_FREQ_RATIO=2, program this to (tMRD/2) and round it up to the next integer value. If C/A parity for DD
+		4 is used, set to tMRD_PAR(tMOD+PL) instead.*/
+#undef DDRC_DRAMTMG3_T_MRD_DEFVAL 
+#undef DDRC_DRAMTMG3_T_MRD_SHIFT 
+#undef DDRC_DRAMTMG3_T_MRD_MASK 
+#define DDRC_DRAMTMG3_T_MRD_DEFVAL                                                 0x0050400C
+#define DDRC_DRAMTMG3_T_MRD_SHIFT                                                  12
+#define DDRC_DRAMTMG3_T_MRD_MASK                                                   0x0003F000U
+
+/*tMOD: Parameter used only in DDR3 and DDR4. Cycles between load mode command and following non-load mode command. If C/A pari
+		y for DDR4 is used, set to tMOD_PAR(tMOD+PL) instead. Set to tMOD if MEMC_FREQ_RATIO=1, or tMOD/2 (rounded up to next integer
+		 if MEMC_FREQ_RATIO=2. Note that if using RDIMM, depending on the PHY, it may be necessary to use a value of tMOD + 1 or (tMO
+		 + 1)/2 to compensate for the extra cycle of latency applied to mode register writes by the RDIMM chip.*/
+#undef DDRC_DRAMTMG3_T_MOD_DEFVAL 
+#undef DDRC_DRAMTMG3_T_MOD_SHIFT 
+#undef DDRC_DRAMTMG3_T_MOD_MASK 
+#define DDRC_DRAMTMG3_T_MOD_DEFVAL                                                 0x0050400C
+#define DDRC_DRAMTMG3_T_MOD_SHIFT                                                  0
+#define DDRC_DRAMTMG3_T_MOD_MASK                                                   0x000003FFU
+
+/*tRCD - tAL: Minimum time from activate to read or write command to same bank. For configurations with MEMC_FREQ_RATIO=2, prog
+		am this to ((tRCD - tAL)/2) and round it up to the next integer value. Minimum value allowed for this register is 1, which im
+		lies minimum (tRCD - tAL) value to be 2 in configurations with MEMC_FREQ_RATIO=2. Unit: Clocks.*/
+#undef DDRC_DRAMTMG4_T_RCD_DEFVAL 
+#undef DDRC_DRAMTMG4_T_RCD_SHIFT 
+#undef DDRC_DRAMTMG4_T_RCD_MASK 
+#define DDRC_DRAMTMG4_T_RCD_DEFVAL                                                 0x05040405
+#define DDRC_DRAMTMG4_T_RCD_SHIFT                                                  24
+#define DDRC_DRAMTMG4_T_RCD_MASK                                                   0x1F000000U
+
+/*DDR4: tCCD_L: This is the minimum time between two reads or two writes for same bank group. Others: tCCD: This is the minimum
+		time between two reads or two writes. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_L/2 or tCCD/2) and rou
+		d it up to the next integer value. Unit: clocks.*/
+#undef DDRC_DRAMTMG4_T_CCD_DEFVAL 
+#undef DDRC_DRAMTMG4_T_CCD_SHIFT 
+#undef DDRC_DRAMTMG4_T_CCD_MASK 
+#define DDRC_DRAMTMG4_T_CCD_DEFVAL                                                 0x05040405
+#define DDRC_DRAMTMG4_T_CCD_SHIFT                                                  16
+#define DDRC_DRAMTMG4_T_CCD_MASK                                                   0x000F0000U
+
+/*DDR4: tRRD_L: Minimum time between activates from bank 'a' to bank 'b' for same bank group. Others: tRRD: Minimum time betwee
+		 activates from bank 'a' to bank 'b'For configurations with MEMC_FREQ_RATIO=2, program this to (tRRD_L/2 or tRRD/2) and round
+		it up to the next integer value. Unit: Clocks.*/
+#undef DDRC_DRAMTMG4_T_RRD_DEFVAL 
+#undef DDRC_DRAMTMG4_T_RRD_SHIFT 
+#undef DDRC_DRAMTMG4_T_RRD_MASK 
+#define DDRC_DRAMTMG4_T_RRD_DEFVAL                                                 0x05040405
+#define DDRC_DRAMTMG4_T_RRD_SHIFT                                                  8
+#define DDRC_DRAMTMG4_T_RRD_MASK                                                   0x00000F00U
+
+/*tRP: Minimum time from precharge to activate of same bank. For MEMC_FREQ_RATIO=1 configurations, t_rp should be set to RoundU
+		(tRP/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rp should be set to RoundDown(RoundUp(tRP/tCK)/2) + 1. For MEMC_FREQ_RATIO
+		2 configurations in LPDDR4, t_rp should be set to RoundUp(RoundUp(tRP/tCK)/2). Unit: Clocks.*/
+#undef DDRC_DRAMTMG4_T_RP_DEFVAL 
+#undef DDRC_DRAMTMG4_T_RP_SHIFT 
+#undef DDRC_DRAMTMG4_T_RP_MASK 
+#define DDRC_DRAMTMG4_T_RP_DEFVAL                                                  0x05040405
+#define DDRC_DRAMTMG4_T_RP_SHIFT                                                   0
+#define DDRC_DRAMTMG4_T_RP_MASK                                                    0x0000001FU
+
+/*This is the time before Self Refresh Exit that CK is maintained as a valid clock before issuing SRX. Specifies the clock stab
+		e time before SRX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEH - DDR2: 1 - DDR3: tCKSRX - DDR4:
+		tCKSRX For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next in
+		eger.*/
+#undef DDRC_DRAMTMG5_T_CKSRX_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKSRX_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKSRX_MASK 
+#define DDRC_DRAMTMG5_T_CKSRX_DEFVAL                                               0x05050403
+#define DDRC_DRAMTMG5_T_CKSRX_SHIFT                                                24
+#define DDRC_DRAMTMG5_T_CKSRX_MASK                                                 0x0F000000U
+
+/*This is the time after Self Refresh Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay afte
+		 SRE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL - DDR2: 1 - DDR3: max (10 ns, 5 tCK) - DDR4: 
+		ax (10 ns, 5 tCK) For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up
+		to next integer.*/
+#undef DDRC_DRAMTMG5_T_CKSRE_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKSRE_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKSRE_MASK 
+#define DDRC_DRAMTMG5_T_CKSRE_DEFVAL                                               0x05050403
+#define DDRC_DRAMTMG5_T_CKSRE_SHIFT                                                16
+#define DDRC_DRAMTMG5_T_CKSRE_MASK                                                 0x000F0000U
+
+/*Minimum CKE low width for Self refresh or Self refresh power down entry to exit timing in memory clock cycles. Recommended se
+		tings: - mDDR: tRFC - LPDDR2: tCKESR - LPDDR3: tCKESR - LPDDR4: max(tCKELPD, tSR) - DDR2: tCKE - DDR3: tCKE + 1 - DDR4: tCKE 
+		 1 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next intege
+		.*/
+#undef DDRC_DRAMTMG5_T_CKESR_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKESR_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKESR_MASK 
+#define DDRC_DRAMTMG5_T_CKESR_DEFVAL                                               0x05050403
+#define DDRC_DRAMTMG5_T_CKESR_SHIFT                                                8
+#define DDRC_DRAMTMG5_T_CKESR_MASK                                                 0x00003F00U
+
+/*Minimum number of cycles of CKE HIGH/LOW during power-down and self refresh. - LPDDR2/LPDDR3 mode: Set this to the larger of 
+		CKE or tCKESR - LPDDR4 mode: Set this to the larger of tCKE, tCKELPD or tSR. - Non-LPDDR2/non-LPDDR3/non-LPDDR4 designs: Set 
+		his to tCKE value. For configurations with MEMC_FREQ_RATIO=2, program this to (value described above)/2 and round it up to th
+		 next integer value. Unit: Clocks.*/
+#undef DDRC_DRAMTMG5_T_CKE_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKE_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKE_MASK 
+#define DDRC_DRAMTMG5_T_CKE_DEFVAL                                                 0x05050403
+#define DDRC_DRAMTMG5_T_CKE_SHIFT                                                  0
+#define DDRC_DRAMTMG5_T_CKE_MASK                                                   0x0000001FU
+
+/*This is the time after Deep Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after 
+		PDE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, program this to recom
+		ended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3
+		devices.*/
+#undef DDRC_DRAMTMG6_T_CKDPDE_DEFVAL 
+#undef DDRC_DRAMTMG6_T_CKDPDE_SHIFT 
+#undef DDRC_DRAMTMG6_T_CKDPDE_MASK 
+#define DDRC_DRAMTMG6_T_CKDPDE_DEFVAL                                              0x02020005
+#define DDRC_DRAMTMG6_T_CKDPDE_SHIFT                                               24
+#define DDRC_DRAMTMG6_T_CKDPDE_MASK                                                0x0F000000U
+
+/*This is the time before Deep Power Down Exit that CK is maintained as a valid clock before issuing DPDX. Specifies the clock 
+		table time before DPDX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, pr
+		gram this to recommended value divided by two and round it up to next integer. This is only present for designs supporting mD
+		R or LPDDR2 devices.*/
+#undef DDRC_DRAMTMG6_T_CKDPDX_DEFVAL 
+#undef DDRC_DRAMTMG6_T_CKDPDX_SHIFT 
+#undef DDRC_DRAMTMG6_T_CKDPDX_MASK 
+#define DDRC_DRAMTMG6_T_CKDPDX_DEFVAL                                              0x02020005
+#define DDRC_DRAMTMG6_T_CKDPDX_SHIFT                                               16
+#define DDRC_DRAMTMG6_T_CKDPDX_MASK                                                0x000F0000U
+
+/*This is the time before Clock Stop Exit that CK is maintained as a valid clock before issuing Clock Stop Exit. Specifies the 
+		lock stable time before next command after Clock Stop Exit. Recommended settings: - mDDR: 1 - LPDDR2: tXP + 2 - LPDDR3: tXP +
+		2 - LPDDR4: tXP + 2 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it 
+		p to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_DRAMTMG6_T_CKCSX_DEFVAL 
+#undef DDRC_DRAMTMG6_T_CKCSX_SHIFT 
+#undef DDRC_DRAMTMG6_T_CKCSX_MASK 
+#define DDRC_DRAMTMG6_T_CKCSX_DEFVAL                                               0x02020005
+#define DDRC_DRAMTMG6_T_CKCSX_SHIFT                                                0
+#define DDRC_DRAMTMG6_T_CKCSX_MASK                                                 0x0000000FU
+
+/*This is the time after Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after PDE. 
+		ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t
+		is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L
+		DDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_DRAMTMG7_T_CKPDE_DEFVAL 
+#undef DDRC_DRAMTMG7_T_CKPDE_SHIFT 
+#undef DDRC_DRAMTMG7_T_CKPDE_MASK 
+#define DDRC_DRAMTMG7_T_CKPDE_DEFVAL                                               0x00000202
+#define DDRC_DRAMTMG7_T_CKPDE_SHIFT                                                8
+#define DDRC_DRAMTMG7_T_CKPDE_MASK                                                 0x00000F00U
+
+/*This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable
+		time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO=
+		, program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti
+		g mDDR or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_DRAMTMG7_T_CKPDX_DEFVAL 
+#undef DDRC_DRAMTMG7_T_CKPDX_SHIFT 
+#undef DDRC_DRAMTMG7_T_CKPDX_MASK 
+#define DDRC_DRAMTMG7_T_CKPDX_DEFVAL                                               0x00000202
+#define DDRC_DRAMTMG7_T_CKPDX_SHIFT                                                0
+#define DDRC_DRAMTMG7_T_CKPDX_MASK                                                 0x0000000FU
+
+/*tXS_FAST: Exit Self Refresh to ZQCL, ZQCS and MRS (only CL, WR, RTP and Geardown mode). For configurations with MEMC_FREQ_RAT
+		O=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Thi
+		 is applicable to only ZQCL/ZQCS commands. Note: Ensure this is less than or equal to t_xs_x32.*/
+#undef DDRC_DRAMTMG8_T_XS_FAST_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_FAST_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_FAST_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_FAST_X32_DEFVAL                                         0x03034405
+#define DDRC_DRAMTMG8_T_XS_FAST_X32_SHIFT                                          24
+#define DDRC_DRAMTMG8_T_XS_FAST_X32_MASK                                           0x7F000000U
+
+/*tXS_ABORT: Exit Self Refresh to commands not requiring a locked DLL in Self Refresh Abort. For configurations with MEMC_FREQ_
+		ATIO=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: 
+		nsure this is less than or equal to t_xs_x32.*/
+#undef DDRC_DRAMTMG8_T_XS_ABORT_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_ABORT_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_ABORT_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_ABORT_X32_DEFVAL                                        0x03034405
+#define DDRC_DRAMTMG8_T_XS_ABORT_X32_SHIFT                                         16
+#define DDRC_DRAMTMG8_T_XS_ABORT_X32_MASK                                          0x007F0000U
+
+/*tXSDLL: Exit Self Refresh to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the 
+		bove value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and 
+		DR4 SDRAMs.*/
+#undef DDRC_DRAMTMG8_T_XS_DLL_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_DLL_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_DLL_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_DLL_X32_DEFVAL                                          0x03034405
+#define DDRC_DRAMTMG8_T_XS_DLL_X32_SHIFT                                           8
+#define DDRC_DRAMTMG8_T_XS_DLL_X32_MASK                                            0x00007F00U
+
+/*tXS: Exit Self Refresh to commands not requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the
+		above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and
+		DDR4 SDRAMs.*/
+#undef DDRC_DRAMTMG8_T_XS_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_X32_DEFVAL                                              0x03034405
+#define DDRC_DRAMTMG8_T_XS_X32_SHIFT                                               0
+#define DDRC_DRAMTMG8_T_XS_X32_MASK                                                0x0000007FU
+
+/*DDR4 Write preamble mode - 0: 1tCK preamble - 1: 2tCK preamble Present only with MEMC_FREQ_RATIO=2*/
+#undef DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_DEFVAL 
+#undef DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_SHIFT 
+#undef DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_MASK 
+#define DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_DEFVAL                                      0x0004040D
+#define DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_SHIFT                                       30
+#define DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_MASK                                        0x40000000U
+
+/*tCCD_S: This is the minimum time between two reads or two writes for different bank group. For bank switching (from bank 'a' 
+		o bank 'b'), the minimum time is this value + 1. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_S/2) and ro
+		nd it up to the next integer value. Present only in designs configured to support DDR4. Unit: clocks.*/
+#undef DDRC_DRAMTMG9_T_CCD_S_DEFVAL 
+#undef DDRC_DRAMTMG9_T_CCD_S_SHIFT 
+#undef DDRC_DRAMTMG9_T_CCD_S_MASK 
+#define DDRC_DRAMTMG9_T_CCD_S_DEFVAL                                               0x0004040D
+#define DDRC_DRAMTMG9_T_CCD_S_SHIFT                                                16
+#define DDRC_DRAMTMG9_T_CCD_S_MASK                                                 0x00070000U
+
+/*tRRD_S: Minimum time between activates from bank 'a' to bank 'b' for different bank group. For configurations with MEMC_FREQ_
+		ATIO=2, program this to (tRRD_S/2) and round it up to the next integer value. Present only in designs configured to support D
+		R4. Unit: Clocks.*/
+#undef DDRC_DRAMTMG9_T_RRD_S_DEFVAL 
+#undef DDRC_DRAMTMG9_T_RRD_S_SHIFT 
+#undef DDRC_DRAMTMG9_T_RRD_S_MASK 
+#define DDRC_DRAMTMG9_T_RRD_S_DEFVAL                                               0x0004040D
+#define DDRC_DRAMTMG9_T_RRD_S_SHIFT                                                8
+#define DDRC_DRAMTMG9_T_RRD_S_MASK                                                 0x00000F00U
+
+/*CWL + PL + BL/2 + tWTR_S Minimum time from write command to read command for different bank group. Includes time for bus turn
+		round, recovery times, and all per-bank, per-rank, and global constraints. Present only in designs configured to support DDR4
+		 Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burst length. This must match the value programm
+		d in the BL bit of the mode register to the SDRAM - tWTR_S = internal write to read command delay for different bank group. T
+		is comes directly from the SDRAM specification. For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using 
+		he above equation by 2, and round it up to next integer.*/
+#undef DDRC_DRAMTMG9_WR2RD_S_DEFVAL 
+#undef DDRC_DRAMTMG9_WR2RD_S_SHIFT 
+#undef DDRC_DRAMTMG9_WR2RD_S_MASK 
+#define DDRC_DRAMTMG9_WR2RD_S_DEFVAL                                               0x0004040D
+#define DDRC_DRAMTMG9_WR2RD_S_SHIFT                                                0
+#define DDRC_DRAMTMG9_WR2RD_S_MASK                                                 0x0000003FU
+
+/*tXMPDLL: This is the minimum Exit MPSM to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program
+		this to (tXMPDLL/2) and round it up to the next integer value. Present only in designs configured to support DDR4. Unit: Mult
+		ples of 32 clocks.*/
+#undef DDRC_DRAMTMG11_POST_MPSM_GAP_X32_DEFVAL 
+#undef DDRC_DRAMTMG11_POST_MPSM_GAP_X32_SHIFT 
+#undef DDRC_DRAMTMG11_POST_MPSM_GAP_X32_MASK 
+#define DDRC_DRAMTMG11_POST_MPSM_GAP_X32_DEFVAL                                    0x440C021C
+#define DDRC_DRAMTMG11_POST_MPSM_GAP_X32_SHIFT                                     24
+#define DDRC_DRAMTMG11_POST_MPSM_GAP_X32_MASK                                      0x7F000000U
+
+/*tMPX_LH: This is the minimum CS_n Low hold time to CKE rising edge. For configurations with MEMC_FREQ_RATIO=2, program this t
+		 RoundUp(tMPX_LH/2)+1. Present only in designs configured to support DDR4. Unit: clocks.*/
+#undef DDRC_DRAMTMG11_T_MPX_LH_DEFVAL 
+#undef DDRC_DRAMTMG11_T_MPX_LH_SHIFT 
+#undef DDRC_DRAMTMG11_T_MPX_LH_MASK 
+#define DDRC_DRAMTMG11_T_MPX_LH_DEFVAL                                             0x440C021C
+#define DDRC_DRAMTMG11_T_MPX_LH_SHIFT                                              16
+#define DDRC_DRAMTMG11_T_MPX_LH_MASK                                               0x001F0000U
+
+/*tMPX_S: Minimum time CS setup time to CKE. For configurations with MEMC_FREQ_RATIO=2, program this to (tMPX_S/2) and round it
+		up to the next integer value. Present only in designs configured to support DDR4. Unit: Clocks.*/
+#undef DDRC_DRAMTMG11_T_MPX_S_DEFVAL 
+#undef DDRC_DRAMTMG11_T_MPX_S_SHIFT 
+#undef DDRC_DRAMTMG11_T_MPX_S_MASK 
+#define DDRC_DRAMTMG11_T_MPX_S_DEFVAL                                              0x440C021C
+#define DDRC_DRAMTMG11_T_MPX_S_SHIFT                                               8
+#define DDRC_DRAMTMG11_T_MPX_S_MASK                                                0x00000300U
+
+/*tCKMPE: Minimum valid clock requirement after MPSM entry. Present only in designs configured to support DDR4. Unit: Clocks. F
+		r configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next i
+		teger.*/
+#undef DDRC_DRAMTMG11_T_CKMPE_DEFVAL 
+#undef DDRC_DRAMTMG11_T_CKMPE_SHIFT 
+#undef DDRC_DRAMTMG11_T_CKMPE_MASK 
+#define DDRC_DRAMTMG11_T_CKMPE_DEFVAL                                              0x440C021C
+#define DDRC_DRAMTMG11_T_CKMPE_SHIFT                                               0
+#define DDRC_DRAMTMG11_T_CKMPE_MASK                                                0x0000001FU
+
+/*tCMDCKE: Delay from valid command to CKE input LOW. Set this to the larger of tESCKE or tCMDCKE For configurations with MEMC_
+		REQ_RATIO=2, program this to (max(tESCKE, tCMDCKE)/2) and round it up to next integer value.*/
+#undef DDRC_DRAMTMG12_T_CMDCKE_DEFVAL 
+#undef DDRC_DRAMTMG12_T_CMDCKE_SHIFT 
+#undef DDRC_DRAMTMG12_T_CMDCKE_MASK 
+#define DDRC_DRAMTMG12_T_CMDCKE_DEFVAL                                             0x00020610
+#define DDRC_DRAMTMG12_T_CMDCKE_SHIFT                                              16
+#define DDRC_DRAMTMG12_T_CMDCKE_MASK                                               0x00030000U
+
+/*tCKEHCMD: Valid command requirement after CKE input HIGH. For configurations with MEMC_FREQ_RATIO=2, program this to (tCKEHCM
+		/2) and round it up to next integer value.*/
+#undef DDRC_DRAMTMG12_T_CKEHCMD_DEFVAL 
+#undef DDRC_DRAMTMG12_T_CKEHCMD_SHIFT 
+#undef DDRC_DRAMTMG12_T_CKEHCMD_MASK 
+#define DDRC_DRAMTMG12_T_CKEHCMD_DEFVAL                                            0x00020610
+#define DDRC_DRAMTMG12_T_CKEHCMD_SHIFT                                             8
+#define DDRC_DRAMTMG12_T_CKEHCMD_MASK                                              0x00000F00U
+
+/*tMRD_PDA: This is the Mode Register Set command cycle time in PDA mode. For configurations with MEMC_FREQ_RATIO=2, program th
+		s to (tMRD_PDA/2) and round it up to next integer value.*/
+#undef DDRC_DRAMTMG12_T_MRD_PDA_DEFVAL 
+#undef DDRC_DRAMTMG12_T_MRD_PDA_SHIFT 
+#undef DDRC_DRAMTMG12_T_MRD_PDA_MASK 
+#define DDRC_DRAMTMG12_T_MRD_PDA_DEFVAL                                            0x00020610
+#define DDRC_DRAMTMG12_T_MRD_PDA_SHIFT                                             0
+#define DDRC_DRAMTMG12_T_MRD_PDA_MASK                                              0x0000001FU
+
+/*- 1 - Disable uMCTL2 generation of ZQCS/MPC(ZQ calibration) command. Register DBGCMD.zq_calib_short can be used instead to is
+		ue ZQ calibration request from APB module. - 0 - Internally generate ZQCS/MPC(ZQ calibration) commands based on ZQCTL1.t_zq_s
+		ort_interval_x1024. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_DIS_AUTO_ZQ_DEFVAL 
+#undef DDRC_ZQCTL0_DIS_AUTO_ZQ_SHIFT 
+#undef DDRC_ZQCTL0_DIS_AUTO_ZQ_MASK 
+#define DDRC_ZQCTL0_DIS_AUTO_ZQ_DEFVAL                                             0x02000040
+#define DDRC_ZQCTL0_DIS_AUTO_ZQ_SHIFT                                              31
+#define DDRC_ZQCTL0_DIS_AUTO_ZQ_MASK                                               0x80000000U
+
+/*- 1 - Disable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Powerdown exit. Only applicable when run in DDR3
+		or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. - 0 - Enable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Power
+		own exit. Only applicable when run in DDR3 or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. This is only present for designs suppo
+		ting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_DIS_SRX_ZQCL_DEFVAL 
+#undef DDRC_ZQCTL0_DIS_SRX_ZQCL_SHIFT 
+#undef DDRC_ZQCTL0_DIS_SRX_ZQCL_MASK 
+#define DDRC_ZQCTL0_DIS_SRX_ZQCL_DEFVAL                                            0x02000040
+#define DDRC_ZQCTL0_DIS_SRX_ZQCL_SHIFT                                             30
+#define DDRC_ZQCTL0_DIS_SRX_ZQCL_MASK                                              0x40000000U
+
+/*- 1 - Denotes that ZQ resistor is shared between ranks. Means ZQinit/ZQCL/ZQCS/MPC(ZQ calibration) commands are sent to one r
+		nk at a time with tZQinit/tZQCL/tZQCS/tZQCAL/tZQLAT timing met between commands so that commands to different ranks do not ov
+		rlap. - 0 - ZQ resistor is not shared. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_DEFVAL 
+#undef DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_SHIFT 
+#undef DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_MASK 
+#define DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_DEFVAL                                      0x02000040
+#define DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_SHIFT                                       29
+#define DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_MASK                                        0x20000000U
+
+/*- 1 - Disable issuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. - 0 - Enable 
+		ssuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. This is only present for des
+		gns supporting DDR4 devices.*/
+#undef DDRC_ZQCTL0_DIS_MPSMX_ZQCL_DEFVAL 
+#undef DDRC_ZQCTL0_DIS_MPSMX_ZQCL_SHIFT 
+#undef DDRC_ZQCTL0_DIS_MPSMX_ZQCL_MASK 
+#define DDRC_ZQCTL0_DIS_MPSMX_ZQCL_DEFVAL                                          0x02000040
+#define DDRC_ZQCTL0_DIS_MPSMX_ZQCL_SHIFT                                           28
+#define DDRC_ZQCTL0_DIS_MPSMX_ZQCL_MASK                                            0x10000000U
+
+/*tZQoper for DDR3/DDR4, tZQCL for LPDDR2/LPDDR3, tZQCAL for LPDDR4: Number of cycles of NOP required after a ZQCL (ZQ calibrat
+		on long)/MPC(ZQ Start) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2: DDR3/DDR4: program this to tZQo
+		er/2 and round it up to the next integer value. LPDDR2/LPDDR3: program this to tZQCL/2 and round it up to the next integer va
+		ue. LPDDR4: program this to tZQCAL/2 and round it up to the next integer value. Unit: Clock cycles. This is only present for 
+		esigns supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_T_ZQ_LONG_NOP_DEFVAL 
+#undef DDRC_ZQCTL0_T_ZQ_LONG_NOP_SHIFT 
+#undef DDRC_ZQCTL0_T_ZQ_LONG_NOP_MASK 
+#define DDRC_ZQCTL0_T_ZQ_LONG_NOP_DEFVAL                                           0x02000040
+#define DDRC_ZQCTL0_T_ZQ_LONG_NOP_SHIFT                                            16
+#define DDRC_ZQCTL0_T_ZQ_LONG_NOP_MASK                                             0x07FF0000U
+
+/*tZQCS for DDR3/DD4/LPDDR2/LPDDR3, tZQLAT for LPDDR4: Number of cycles of NOP required after a ZQCS (ZQ calibration short)/MPC
+		ZQ Latch) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2, program this to tZQCS/2 and round it up to t
+		e next integer value. Unit: Clock cycles. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devic
+		s.*/
+#undef DDRC_ZQCTL0_T_ZQ_SHORT_NOP_DEFVAL 
+#undef DDRC_ZQCTL0_T_ZQ_SHORT_NOP_SHIFT 
+#undef DDRC_ZQCTL0_T_ZQ_SHORT_NOP_MASK 
+#define DDRC_ZQCTL0_T_ZQ_SHORT_NOP_DEFVAL                                          0x02000040
+#define DDRC_ZQCTL0_T_ZQ_SHORT_NOP_SHIFT                                           0
+#define DDRC_ZQCTL0_T_ZQ_SHORT_NOP_MASK                                            0x000003FFU
+
+/*tZQReset: Number of cycles of NOP required after a ZQReset (ZQ calibration Reset) command is issued to SDRAM. For configurati
+		ns with MEMC_FREQ_RATIO=2, program this to tZQReset/2 and round it up to the next integer value. Unit: Clock cycles. This is 
+		nly present for designs supporting LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL1_T_ZQ_RESET_NOP_DEFVAL 
+#undef DDRC_ZQCTL1_T_ZQ_RESET_NOP_SHIFT 
+#undef DDRC_ZQCTL1_T_ZQ_RESET_NOP_MASK 
+#define DDRC_ZQCTL1_T_ZQ_RESET_NOP_DEFVAL                                          0x02000100
+#define DDRC_ZQCTL1_T_ZQ_RESET_NOP_SHIFT                                           20
+#define DDRC_ZQCTL1_T_ZQ_RESET_NOP_MASK                                            0x3FF00000U
+
+/*Average interval to wait between automatically issuing ZQCS (ZQ calibration short)/MPC(ZQ calibration) commands to DDR3/DDR4/
+		PDDR2/LPDDR3/LPDDR4 devices. Meaningless, if ZQCTL0.dis_auto_zq=1. Unit: 1024 clock cycles. This is only present for designs 
+		upporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_DEFVAL 
+#undef DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_SHIFT 
+#undef DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_MASK 
+#define DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_DEFVAL                               0x02000100
+#define DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_SHIFT                                0
+#define DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_MASK                                 0x000FFFFFU
+
+/*Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.*/
+#undef DDRC_DFITMG0_DFI_T_CTRL_DELAY_DEFVAL 
+#undef DDRC_DFITMG0_DFI_T_CTRL_DELAY_SHIFT 
+#undef DDRC_DFITMG0_DFI_T_CTRL_DELAY_MASK 
+#define DDRC_DFITMG0_DFI_T_CTRL_DELAY_DEFVAL                                       0x07020002
+#define DDRC_DFITMG0_DFI_T_CTRL_DELAY_SHIFT                                        24
+#define DDRC_DFITMG0_DFI_T_CTRL_DELAY_MASK                                         0x1F000000U
+
+/*Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.*/
+#undef DDRC_DFITMG0_DFI_RDDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_DFI_RDDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_DFI_RDDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_DFI_RDDATA_USE_SDR_DEFVAL                                     0x07020002
+#define DDRC_DFITMG0_DFI_RDDATA_USE_SDR_SHIFT                                      23
+#define DDRC_DFITMG0_DFI_RDDATA_USE_SDR_MASK                                       0x00800000U
+
+/*Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks*/
+#undef DDRC_DFITMG0_DFI_T_RDDATA_EN_DEFVAL 
+#undef DDRC_DFITMG0_DFI_T_RDDATA_EN_SHIFT 
+#undef DDRC_DFITMG0_DFI_T_RDDATA_EN_MASK 
+#define DDRC_DFITMG0_DFI_T_RDDATA_EN_DEFVAL                                        0x07020002
+#define DDRC_DFITMG0_DFI_T_RDDATA_EN_SHIFT                                         16
+#define DDRC_DFITMG0_DFI_T_RDDATA_EN_MASK                                          0x003F0000U
+
+/*Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.*/
+#undef DDRC_DFITMG0_DFI_WRDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_DFI_WRDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_DFI_WRDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_DFI_WRDATA_USE_SDR_DEFVAL                                     0x07020002
+#define DDRC_DFITMG0_DFI_WRDATA_USE_SDR_SHIFT                                      15
+#define DDRC_DFITMG0_DFI_WRDATA_USE_SDR_MASK                                       0x00008000U
+
+/*Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks*/
+#undef DDRC_DFITMG0_DFI_TPHY_WRDATA_DEFVAL 
+#undef DDRC_DFITMG0_DFI_TPHY_WRDATA_SHIFT 
+#undef DDRC_DFITMG0_DFI_TPHY_WRDATA_MASK 
+#define DDRC_DFITMG0_DFI_TPHY_WRDATA_DEFVAL                                        0x07020002
+#define DDRC_DFITMG0_DFI_TPHY_WRDATA_SHIFT                                         8
+#define DDRC_DFITMG0_DFI_TPHY_WRDATA_MASK                                          0x00003F00U
+
+/*Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.*/
+#undef DDRC_DFITMG0_DFI_TPHY_WRLAT_DEFVAL 
+#undef DDRC_DFITMG0_DFI_TPHY_WRLAT_SHIFT 
+#undef DDRC_DFITMG0_DFI_TPHY_WRLAT_MASK 
+#define DDRC_DFITMG0_DFI_TPHY_WRLAT_DEFVAL                                         0x07020002
+#define DDRC_DFITMG0_DFI_TPHY_WRLAT_SHIFT                                          0
+#define DDRC_DFITMG0_DFI_TPHY_WRLAT_MASK                                           0x0000003FU
+
+/*Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated command is driven. 
+		his field is used for CAL mode, should be set to '0' or the value which matches the CAL mode register setting in the DRAM. If
+		the PHY can add the latency for CAL mode, this should be set to '0'. Valid Range: 0, 3, 4, 5, 6, and 8*/
+#undef DDRC_DFITMG1_DFI_T_CMD_LAT_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_CMD_LAT_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_CMD_LAT_MASK 
+#define DDRC_DFITMG1_DFI_T_CMD_LAT_DEFVAL                                          0x00000404
+#define DDRC_DFITMG1_DFI_T_CMD_LAT_SHIFT                                           28
+#define DDRC_DFITMG1_DFI_T_CMD_LAT_MASK                                            0xF0000000U
+
+/*Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated dfi_parity_in signa
+		 is driven.*/
+#undef DDRC_DFITMG1_DFI_T_PARIN_LAT_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_PARIN_LAT_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_PARIN_LAT_MASK 
+#define DDRC_DFITMG1_DFI_T_PARIN_LAT_DEFVAL                                        0x00000404
+#define DDRC_DFITMG1_DFI_T_PARIN_LAT_SHIFT                                         24
+#define DDRC_DFITMG1_DFI_T_PARIN_LAT_MASK                                          0x03000000U
+
+/*Specifies the number of DFI clocks between when the dfi_wrdata_en signal is asserted and when the corresponding write data tr
+		nsfer is completed on the DRAM bus. This corresponds to the DFI timing parameter twrdata_delay. Refer to PHY specification fo
+		 correct value. For DFI 3.0 PHY, set to twrdata_delay, a new timing parameter introduced in DFI 3.0. For DFI 2.1 PHY, set to 
+		phy_wrdata + (delay of DFI write data to the DRAM). Value to be programmed is in terms of DFI clocks, not PHY clocks. In FREQ
+		RATIO=2, divide PHY's value by 2 and round up to next integer. If using DFITMG0.dfi_wrdata_use_sdr=1, add 1 to the value. Uni
+		: Clocks*/
+#undef DDRC_DFITMG1_DFI_T_WRDATA_DELAY_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_WRDATA_DELAY_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_WRDATA_DELAY_MASK 
+#define DDRC_DFITMG1_DFI_T_WRDATA_DELAY_DEFVAL                                     0x00000404
+#define DDRC_DFITMG1_DFI_T_WRDATA_DELAY_SHIFT                                      16
+#define DDRC_DFITMG1_DFI_T_WRDATA_DELAY_MASK                                       0x001F0000U
+
+/*Specifies the number of DFI clock cycles from the assertion of the dfi_dram_clk_disable signal on the DFI until the clock to 
+		he DRAM memory devices, at the PHY-DRAM boundary, maintains a low value. If the DFI clock and the memory clock are not phase 
+		ligned, this timing parameter should be rounded up to the next integer value.*/
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_MASK 
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_DEFVAL                                 0x00000404
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_SHIFT                                  8
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_MASK                                   0x00000F00U
+
+/*Specifies the number of DFI clock cycles from the de-assertion of the dfi_dram_clk_disable signal on the DFI until the first 
+		alid rising edge of the clock to the DRAM memory devices, at the PHY-DRAM boundary. If the DFI clock and the memory clock are
+		not phase aligned, this timing parameter should be rounded up to the next integer value.*/
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_MASK 
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_DEFVAL                                  0x00000404
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_SHIFT                                   0
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_MASK                                    0x0000000FU
+
+/*Setting for DFI's tlp_resp time. Same value is used for both Power Down, Self Refresh, Deep Power Down and Maximum Power Savi
+		g modes. DFI 2.1 specification onwards, recommends using a fixed value of 7 always.*/
+#undef DDRC_DFILPCFG0_DFI_TLP_RESP_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_TLP_RESP_MASK 
+#define DDRC_DFILPCFG0_DFI_TLP_RESP_DEFVAL                                         0x07000000
+#define DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT                                          24
+#define DDRC_DFILPCFG0_DFI_TLP_RESP_MASK                                           0x0F000000U
+
+/*Value to drive on dfi_lp_wakeup signal when Deep Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16
+		cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7
+		- 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 
+		31072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting mDDR or LPDDR2/LPDDR3 device
+		.*/
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_DEFVAL                                    0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_SHIFT                                     20
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK                                      0x00F00000U
+
+/*Enables DFI Low Power interface handshaking during Deep Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled This is only pres
+		nt for designs supporting mDDR or LPDDR2/LPDDR3 devices.*/
+#undef DDRC_DFILPCFG0_DFI_LP_EN_DPD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_EN_DPD_DEFVAL                                        0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT                                         16
+#define DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK                                          0x00010000U
+
+/*Value to drive on dfi_lp_wakeup signal when Self Refresh mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cy
+		les - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 
+		048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 131
+		72 cycles - 0xE - 262144 cycles - 0xF - Unlimited*/
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_DEFVAL                                     0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT                                      12
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK                                       0x0000F000U
+
+/*Enables DFI Low Power interface handshaking during Self Refresh Entry/Exit. - 0 - Disabled - 1 - Enabled*/
+#undef DDRC_DFILPCFG0_DFI_LP_EN_SR_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_EN_SR_DEFVAL                                         0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT                                          8
+#define DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK                                           0x00000100U
+
+/*Value to drive on dfi_lp_wakeup signal when Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cycl
+		s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20
+		8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107
+		 cycles - 0xE - 262144 cycles - 0xF - Unlimited*/
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_DEFVAL                                     0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT                                      4
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK                                       0x000000F0U
+
+/*Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled*/
+#undef DDRC_DFILPCFG0_DFI_LP_EN_PD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_EN_PD_DEFVAL                                         0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT                                          0
+#define DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK                                           0x00000001U
+
+/*Value to drive on dfi_lp_wakeup signal when Maximum Power Saving Mode is entered. Determines the DFI's tlp_wakeup time: - 0x0
+		- 16 cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles 
+		 0x7 - 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0
+		D - 131072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting DDR4 devices.*/
+#undef DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_DEFVAL 
+#undef DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_SHIFT 
+#undef DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_MASK 
+#define DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_DEFVAL                                   0x00000000
+#define DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_SHIFT                                    4
+#define DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_MASK                                     0x000000F0U
+
+/*Enables DFI Low Power interface handshaking during Maximum Power Saving Mode Entry/Exit. - 0 - Disabled - 1 - Enabled This is
+		only present for designs supporting DDR4 devices.*/
+#undef DDRC_DFILPCFG1_DFI_LP_EN_MPSM_DEFVAL 
+#undef DDRC_DFILPCFG1_DFI_LP_EN_MPSM_SHIFT 
+#undef DDRC_DFILPCFG1_DFI_LP_EN_MPSM_MASK 
+#define DDRC_DFILPCFG1_DFI_LP_EN_MPSM_DEFVAL                                       0x00000000
+#define DDRC_DFILPCFG1_DFI_LP_EN_MPSM_SHIFT                                        0
+#define DDRC_DFILPCFG1_DFI_LP_EN_MPSM_MASK                                         0x00000001U
+
+/*This is the minimum amount of time between uMCTL2 initiated DFI update requests (which is executed whenever the uMCTL2 is idl
+		). Set this number higher to reduce the frequency of update requests, which can have a small impact on the latency of the fir
+		t read request when the uMCTL2 is idle. Unit: 1024 clocks*/
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_DEFVAL 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_SHIFT 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_MASK 
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_DEFVAL                       0x00000000
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_SHIFT                        16
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_MASK                         0x00FF0000U
+
+/*This is the maximum amount of time between uMCTL2 initiated DFI update requests. This timer resets with each update request; 
+		hen the timer expires dfi_ctrlupd_req is sent and traffic is blocked until the dfi_ctrlupd_ackx is received. PHY can use this
+		idle time to recalibrate the delay lines to the DLLs. The DFI controller update is also used to reset PHY FIFO pointers in ca
+		e of data capture errors. Updates are required to maintain calibration over PVT, but frequent updates may impact performance.
+		Note: Value programmed for DFIUPD1.dfi_t_ctrlupd_interval_max_x1024 must be greater than DFIUPD1.dfi_t_ctrlupd_interval_min_x
+		024. Unit: 1024 clocks*/
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_DEFVAL 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_SHIFT 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_MASK 
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_DEFVAL                       0x00000000
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_SHIFT                        0
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_MASK                         0x000000FFU
+
+/*Defines polarity of dfi_wrdata_cs and dfi_rddata_cs signals. - 0: Signals are active low - 1: Signals are active high*/
+#undef DDRC_DFIMISC_DFI_DATA_CS_POLARITY_DEFVAL 
+#undef DDRC_DFIMISC_DFI_DATA_CS_POLARITY_SHIFT 
+#undef DDRC_DFIMISC_DFI_DATA_CS_POLARITY_MASK 
+#define DDRC_DFIMISC_DFI_DATA_CS_POLARITY_DEFVAL                                   0x00000001
+#define DDRC_DFIMISC_DFI_DATA_CS_POLARITY_SHIFT                                    2
+#define DDRC_DFIMISC_DFI_DATA_CS_POLARITY_MASK                                     0x00000004U
+
+/*DBI implemented in DDRC or PHY. - 0 - DDRC implements DBI functionality. - 1 - PHY implements DBI functionality. Present only
+		in designs configured to support DDR4 and LPDDR4.*/
+#undef DDRC_DFIMISC_PHY_DBI_MODE_DEFVAL 
+#undef DDRC_DFIMISC_PHY_DBI_MODE_SHIFT 
+#undef DDRC_DFIMISC_PHY_DBI_MODE_MASK 
+#define DDRC_DFIMISC_PHY_DBI_MODE_DEFVAL                                           0x00000001
+#define DDRC_DFIMISC_PHY_DBI_MODE_SHIFT                                            1
+#define DDRC_DFIMISC_PHY_DBI_MODE_MASK                                             0x00000002U
+
+/*PHY initialization complete enable signal. When asserted the dfi_init_complete signal can be used to trigger SDRAM initialisa
+		ion*/
+#undef DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_DEFVAL 
+#undef DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_SHIFT 
+#undef DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_MASK 
+#define DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_DEFVAL                                   0x00000001
+#define DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_SHIFT                                    0
+#define DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_MASK                                     0x00000001U
+
+/*>Number of clocks between when a read command is sent on the DFI control interface and when the associated dfi_rddata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_rdcslat. Refer to PHY specification for correct value.*/
+#undef DDRC_DFITMG2_DFI_TPHY_RDCSLAT_DEFVAL 
+#undef DDRC_DFITMG2_DFI_TPHY_RDCSLAT_SHIFT 
+#undef DDRC_DFITMG2_DFI_TPHY_RDCSLAT_MASK 
+#define DDRC_DFITMG2_DFI_TPHY_RDCSLAT_DEFVAL                                       0x00000202
+#define DDRC_DFITMG2_DFI_TPHY_RDCSLAT_SHIFT                                        8
+#define DDRC_DFITMG2_DFI_TPHY_RDCSLAT_MASK                                         0x00003F00U
+
+/*Number of clocks between when a write command is sent on the DFI control interface and when the associated dfi_wrdata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_wrcslat. Refer to PHY specification for correct value.*/
+#undef DDRC_DFITMG2_DFI_TPHY_WRCSLAT_DEFVAL 
+#undef DDRC_DFITMG2_DFI_TPHY_WRCSLAT_SHIFT 
+#undef DDRC_DFITMG2_DFI_TPHY_WRCSLAT_MASK 
+#define DDRC_DFITMG2_DFI_TPHY_WRCSLAT_DEFVAL                                       0x00000202
+#define DDRC_DFITMG2_DFI_TPHY_WRCSLAT_SHIFT                                        0
+#define DDRC_DFITMG2_DFI_TPHY_WRCSLAT_MASK                                         0x0000003FU
+
+/*Read DBI enable signal in DDRC. - 0 - Read DBI is disabled. - 1 - Read DBI is enabled. This signal must be set the same value
+		as DRAM's mode register. - DDR4: MR5 bit A12. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[6]*/
+#undef DDRC_DBICTL_RD_DBI_EN_DEFVAL 
+#undef DDRC_DBICTL_RD_DBI_EN_SHIFT 
+#undef DDRC_DBICTL_RD_DBI_EN_MASK 
+#define DDRC_DBICTL_RD_DBI_EN_DEFVAL                                               0x00000001
+#define DDRC_DBICTL_RD_DBI_EN_SHIFT                                                2
+#define DDRC_DBICTL_RD_DBI_EN_MASK                                                 0x00000004U
+
+/*Write DBI enable signal in DDRC. - 0 - Write DBI is disabled. - 1 - Write DBI is enabled. This signal must be set the same va
+		ue as DRAM's mode register. - DDR4: MR5 bit A11. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[7]*/
+#undef DDRC_DBICTL_WR_DBI_EN_DEFVAL 
+#undef DDRC_DBICTL_WR_DBI_EN_SHIFT 
+#undef DDRC_DBICTL_WR_DBI_EN_MASK 
+#define DDRC_DBICTL_WR_DBI_EN_DEFVAL                                               0x00000001
+#define DDRC_DBICTL_WR_DBI_EN_SHIFT                                                1
+#define DDRC_DBICTL_WR_DBI_EN_MASK                                                 0x00000002U
+
+/*DM enable signal in DDRC. - 0 - DM is disabled. - 1 - DM is enabled. This signal must be set the same logical value as DRAM's
+		mode register. - DDR4: Set this to same value as MR5 bit A10. When x4 devices are used, this signal must be set to 0. - LPDDR
+		: Set this to inverted value of MR13[5] which is opposite polarity from this signal*/
+#undef DDRC_DBICTL_DM_EN_DEFVAL 
+#undef DDRC_DBICTL_DM_EN_SHIFT 
+#undef DDRC_DBICTL_DM_EN_MASK 
+#define DDRC_DBICTL_DM_EN_DEFVAL                                                   0x00000001
+#define DDRC_DBICTL_DM_EN_SHIFT                                                    0
+#define DDRC_DBICTL_DM_EN_MASK                                                     0x00000001U
+
+/*Selects the HIF address bit used as rank address bit 0. Valid Range: 0 to 27, and 31 Internal Base: 6 The selected HIF addres
+		 bit is determined by adding the internal base to the value of this field. If set to 31, rank address bit 0 is set to 0.*/
+#undef DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_DEFVAL 
+#undef DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_SHIFT 
+#undef DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_MASK 
+#define DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_DEFVAL                                       
+#define DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_SHIFT                                        0
+#define DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_MASK                                         0x0000001FU
+
+/*Selects the HIF address bit used as bank address bit 2. Valid Range: 0 to 29 and 31 Internal Base: 4 The selected HIF address
+		bit is determined by adding the internal base to the value of this field. If set to 31, bank address bit 2 is set to 0.*/
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B2_DEFVAL 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B2_SHIFT 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B2_MASK 
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B2_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B2_SHIFT                                        16
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B2_MASK                                         0x001F0000U
+
+/*Selects the HIF address bits used as bank address bit 1. Valid Range: 0 to 30 Internal Base: 3 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B1_DEFVAL 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B1_SHIFT 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B1_MASK 
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B1_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B1_SHIFT                                        8
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B1_MASK                                         0x00001F00U
+
+/*Selects the HIF address bits used as bank address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B0_DEFVAL 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B0_SHIFT 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B0_MASK 
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B0_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B0_SHIFT                                        0
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B0_MASK                                         0x0000001FU
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 5. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 6. - Quarter bus width mode: Selects the HIF address bit used as column address bit 7 . Vali
+		 Range: 0 to 7, and 15 Internal Base: 5 The selected HIF address bit is determined by adding the internal base to the value o
+		 this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B5_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B5_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B5_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B5_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B5_SHIFT                                         24
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B5_MASK                                          0x0F000000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 4. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 5. - Quarter bus width mode: Selects the HIF address bit used as column address bit 6. Valid
+		Range: 0 to 7, and 15 Internal Base: 4 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B4_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B4_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B4_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B4_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B4_SHIFT                                         16
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B4_MASK                                          0x000F0000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 3. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 4. - Quarter bus width mode: Selects the HIF address bit used as column address bit 5. Valid
+		Range: 0 to 7 Internal Base: 3 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=16, it is required to program this to 0, hence register does not exist i
+		 this case.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B3_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B3_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B3_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B3_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B3_SHIFT                                         8
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B3_MASK                                          0x00000F00U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 2. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 3. - Quarter bus width mode: Selects the HIF address bit used as column address bit 4. Valid
+		Range: 0 to 7 Internal Base: 2 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=8 or 16, it is required to program this to 0.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B2_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B2_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B2_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B2_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B2_SHIFT                                         0
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B2_MASK                                          0x0000000FU
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 9. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: Selects the HIF address bit used as
+		column address bit 13 (11 in LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 9 The selected HIF address bit i
+		 determined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: 
+		er JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source addr
+		ss bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus an
+		 hence column bit 10 is used.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B9_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B9_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B9_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B9_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B9_SHIFT                                         24
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B9_MASK                                          0x0F000000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 8. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 9. - Quarter bus width mode: Selects the HIF address bit used as column address bit 11 (10 i
+		 LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 8 The selected HIF address bit is determined by adding the i
+		ternal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specif
+		cation, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to col
+		mn address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is use
+		.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B8_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B8_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B8_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B8_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B8_SHIFT                                         16
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B8_MASK                                          0x000F0000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 7. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 8. - Quarter bus width mode: Selects the HIF address bit used as column address bit 9. Valid
+		Range: 0 to 7, and 15 Internal Base: 7 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B7_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B7_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B7_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B7_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B7_SHIFT                                         8
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B7_MASK                                          0x00000F00U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 6. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 7. - Quarter bus width mode: Selects the HIF address bit used as column address bit 8. Valid
+		Range: 0 to 7, and 15 Internal Base: 6 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B6_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B6_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B6_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B6_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B6_SHIFT                                         0
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B6_MASK                                          0x0000000FU
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Unused. To make it unused, this should be tied to 4'hF. - Quarter bus width mode: Unused. To make it unused, this must 
+		e tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 11 The selected HIF address bit is determined by adding the intern
+		l base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specificati
+		n, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to column a
+		dress bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is used.*/
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B11_DEFVAL 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B11_SHIFT 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B11_MASK 
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B11_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B11_SHIFT                                        8
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B11_MASK                                         0x00000F00U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: UNUSED.
+		To make it unused, this must be tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 10 The selected HIF address bit is d
+		termined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per
+		JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source address
+		bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and h
+		nce column bit 10 is used.*/
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B10_DEFVAL 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B10_SHIFT 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B10_MASK 
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B10_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B10_SHIFT                                        0
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B10_MASK                                         0x0000000FU
+
+/*Selects the HIF address bit used as row address bit 11. Valid Range: 0 to 11, and 15 Internal Base: 17 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 11 is set to 0.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B11_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B11_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B11_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B11_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B11_SHIFT                                        24
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B11_MASK                                         0x0F000000U
+
+/*Selects the HIF address bits used as row address bits 2 to 10. Valid Range: 0 to 11, and 15 Internal Base: 8 (for row address
+		bit 2), 9 (for row address bit 3), 10 (for row address bit 4) etc increasing to 16 (for row address bit 10) The selected HIF 
+		ddress bit for each of the row address bits is determined by adding the internal base to the value of this field. When value 
+		5 is used the values of row address bits 2 to 10 are defined by registers ADDRMAP9, ADDRMAP10, ADDRMAP11.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_DEFVAL                                     0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_SHIFT                                      16
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_MASK                                       0x000F0000U
+
+/*Selects the HIF address bits used as row address bit 1. Valid Range: 0 to 11 Internal Base: 7 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B1_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B1_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B1_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B1_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B1_SHIFT                                         8
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B1_MASK                                          0x00000F00U
+
+/*Selects the HIF address bits used as row address bit 0. Valid Range: 0 to 11 Internal Base: 6 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B0_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B0_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B0_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B0_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B0_SHIFT                                         0
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B0_MASK                                          0x0000000FU
+
+/*Set this to 1 if there is an LPDDR3 SDRAM 6Gb or 12Gb device in use. - 1 - LPDDR3 SDRAM 6Gb/12Gb device in use. Every address
+		having row[14:13]==2'b11 is considered as invalid - 0 - non-LPDDR3 6Gb/12Gb device in use. All addresses are valid Present on
+		y in designs configured to support LPDDR3.*/
+#undef DDRC_ADDRMAP6_LPDDR3_6GB_12GB_DEFVAL 
+#undef DDRC_ADDRMAP6_LPDDR3_6GB_12GB_SHIFT 
+#undef DDRC_ADDRMAP6_LPDDR3_6GB_12GB_MASK 
+#define DDRC_ADDRMAP6_LPDDR3_6GB_12GB_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_LPDDR3_6GB_12GB_SHIFT                                        31
+#define DDRC_ADDRMAP6_LPDDR3_6GB_12GB_MASK                                         0x80000000U
+
+/*Selects the HIF address bit used as row address bit 15. Valid Range: 0 to 11, and 15 Internal Base: 21 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 15 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B15_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B15_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B15_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B15_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B15_SHIFT                                        24
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B15_MASK                                         0x0F000000U
+
+/*Selects the HIF address bit used as row address bit 14. Valid Range: 0 to 11, and 15 Internal Base: 20 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 14 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B14_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B14_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B14_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B14_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B14_SHIFT                                        16
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B14_MASK                                         0x000F0000U
+
+/*Selects the HIF address bit used as row address bit 13. Valid Range: 0 to 11, and 15 Internal Base: 19 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 13 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B13_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B13_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B13_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B13_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B13_SHIFT                                        8
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B13_MASK                                         0x00000F00U
+
+/*Selects the HIF address bit used as row address bit 12. Valid Range: 0 to 11, and 15 Internal Base: 18 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 12 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B12_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B12_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B12_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B12_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B12_SHIFT                                        0
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B12_MASK                                         0x0000000FU
+
+/*Selects the HIF address bit used as row address bit 17. Valid Range: 0 to 10, and 15 Internal Base: 23 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 17 is set to 0.*/
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B17_DEFVAL 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B17_SHIFT 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B17_MASK 
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B17_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B17_SHIFT                                        8
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B17_MASK                                         0x00000F00U
+
+/*Selects the HIF address bit used as row address bit 16. Valid Range: 0 to 11, and 15 Internal Base: 22 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 16 is set to 0.*/
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B16_DEFVAL 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B16_SHIFT 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B16_MASK 
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B16_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B16_SHIFT                                        0
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B16_MASK                                         0x0000000FU
+
+/*Selects the HIF address bits used as bank group address bit 1. Valid Range: 0 to 30, and 31 Internal Base: 3 The selected HIF
+		address bit for each of the bank group address bits is determined by adding the internal base to the value of this field. If 
+		et to 31, bank group address bit 1 is set to 0.*/
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B1_DEFVAL 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B1_SHIFT 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B1_MASK 
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B1_DEFVAL                                         0x00000000
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B1_SHIFT                                          8
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B1_MASK                                           0x00001F00U
+
+/*Selects the HIF address bits used as bank group address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address
+		bit for each of the bank group address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B0_DEFVAL 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B0_SHIFT 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B0_MASK 
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B0_DEFVAL                                         0x00000000
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B0_SHIFT                                          0
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B0_MASK                                           0x0000001FU
+
+/*Selects the HIF address bits used as row address bit 5. Valid Range: 0 to 11 Internal Base: 11 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B5_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B5_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B5_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B5_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B5_SHIFT                                         24
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B5_MASK                                          0x0F000000U
+
+/*Selects the HIF address bits used as row address bit 4. Valid Range: 0 to 11 Internal Base: 10 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B4_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B4_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B4_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B4_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B4_SHIFT                                         16
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B4_MASK                                          0x000F0000U
+
+/*Selects the HIF address bits used as row address bit 3. Valid Range: 0 to 11 Internal Base: 9 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B3_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B3_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B3_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B3_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B3_SHIFT                                         8
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B3_MASK                                          0x00000F00U
+
+/*Selects the HIF address bits used as row address bit 2. Valid Range: 0 to 11 Internal Base: 8 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B2_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B2_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B2_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B2_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B2_SHIFT                                         0
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B2_MASK                                          0x0000000FU
+
+/*Selects the HIF address bits used as row address bit 9. Valid Range: 0 to 11 Internal Base: 15 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B9_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B9_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B9_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B9_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B9_SHIFT                                        24
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B9_MASK                                         0x0F000000U
+
+/*Selects the HIF address bits used as row address bit 8. Valid Range: 0 to 11 Internal Base: 14 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B8_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B8_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B8_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B8_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B8_SHIFT                                        16
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B8_MASK                                         0x000F0000U
+
+/*Selects the HIF address bits used as row address bit 7. Valid Range: 0 to 11 Internal Base: 13 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B7_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B7_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B7_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B7_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B7_SHIFT                                        8
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B7_MASK                                         0x00000F00U
+
+/*Selects the HIF address bits used as row address bit 6. Valid Range: 0 to 11 Internal Base: 12 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B6_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B6_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B6_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B6_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B6_SHIFT                                        0
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B6_MASK                                         0x0000000FU
+
+/*Selects the HIF address bits used as row address bit 10. Valid Range: 0 to 11 Internal Base: 16 The selected HIF address bit 
+		or each of the row address bits is determined by adding the internal base to the value of this field. This register field is 
+		sed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP11_ADDRMAP_ROW_B10_DEFVAL 
+#undef DDRC_ADDRMAP11_ADDRMAP_ROW_B10_SHIFT 
+#undef DDRC_ADDRMAP11_ADDRMAP_ROW_B10_MASK 
+#define DDRC_ADDRMAP11_ADDRMAP_ROW_B10_DEFVAL                                      
+#define DDRC_ADDRMAP11_ADDRMAP_ROW_B10_SHIFT                                       0
+#define DDRC_ADDRMAP11_ADDRMAP_ROW_B10_MASK                                        0x0000000FU
+
+/*Cycles to hold ODT for a write command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x5 (DDR2-400/533/
+		67), 0x6 (DDR2-800), 0x7 (DDR2-1066) - BL4: 0x3 (DDR2-400/533/667), 0x4 (DDR2-800), 0x5 (DDR2-1066) DDR3: - BL8: 0x6 DDR4: - 
+		L8: 5 + WR_PREAMBLE + CRC_MODE WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) CRC_MODE = 0 (not CRC mode), 1 
+		CRC mode) LPDDR3: - BL8: 7 + RU(tODTon(max)/tCK)*/
+#undef DDRC_ODTCFG_WR_ODT_HOLD_DEFVAL 
+#undef DDRC_ODTCFG_WR_ODT_HOLD_SHIFT 
+#undef DDRC_ODTCFG_WR_ODT_HOLD_MASK 
+#define DDRC_ODTCFG_WR_ODT_HOLD_DEFVAL                                             0x04000400
+#define DDRC_ODTCFG_WR_ODT_HOLD_SHIFT                                              24
+#define DDRC_ODTCFG_WR_ODT_HOLD_MASK                                               0x0F000000U
+
+/*The delay, in clock cycles, from issuing a write command to setting ODT values associated with that command. ODT setting must
+		remain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CWL + AL - 3 (DDR2-400/533/
+		67), CWL + AL - 4 (DDR2-800), CWL + AL - 5 (DDR2-1066) If (CWL + AL - 3 < 0), uMCTL2 does not support ODT for write operation
+		 DDR3: - 0x0 DDR4: - DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) LPDDR3: - WL - 1 - RU(tODTon(max)/tCK))*/
+#undef DDRC_ODTCFG_WR_ODT_DELAY_DEFVAL 
+#undef DDRC_ODTCFG_WR_ODT_DELAY_SHIFT 
+#undef DDRC_ODTCFG_WR_ODT_DELAY_MASK 
+#define DDRC_ODTCFG_WR_ODT_DELAY_DEFVAL                                            0x04000400
+#define DDRC_ODTCFG_WR_ODT_DELAY_SHIFT                                             16
+#define DDRC_ODTCFG_WR_ODT_DELAY_MASK                                              0x001F0000U
+
+/*Cycles to hold ODT for a read command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x6 (not DDR2-1066)
+		 0x7 (DDR2-1066) - BL4: 0x4 (not DDR2-1066), 0x5 (DDR2-1066) DDR3: - BL8 - 0x6 DDR4: - BL8: 5 + RD_PREAMBLE RD_PREAMBLE = 1 (
+		tCK write preamble), 2 (2tCK write preamble) LPDDR3: - BL8: 5 + RU(tDQSCK(max)/tCK) - RD(tDQSCK(min)/tCK) + RU(tODTon(max)/tC
+		)*/
+#undef DDRC_ODTCFG_RD_ODT_HOLD_DEFVAL 
+#undef DDRC_ODTCFG_RD_ODT_HOLD_SHIFT 
+#undef DDRC_ODTCFG_RD_ODT_HOLD_MASK 
+#define DDRC_ODTCFG_RD_ODT_HOLD_DEFVAL                                             0x04000400
+#define DDRC_ODTCFG_RD_ODT_HOLD_SHIFT                                              8
+#define DDRC_ODTCFG_RD_ODT_HOLD_MASK                                               0x00000F00U
+
+/*The delay, in clock cycles, from issuing a read command to setting ODT values associated with that command. ODT setting must 
+		emain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CL + AL - 4 (not DDR2-1066),
+		CL + AL - 5 (DDR2-1066) If (CL + AL - 4 < 0), uMCTL2 does not support ODT for read operation. DDR3: - CL - CWL DDR4: - CL - C
+		L - RD_PREAMBLE + WR_PREAMBLE + DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK
+		write preamble) RD_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) If (CL - CWL - RD_PREAMBLE + WR_PREAMBLE) < 0,
+		uMCTL2 does not support ODT for read operation. LPDDR3: - RL + RD(tDQSCK(min)/tCK) - 1 - RU(tODTon(max)/tCK)*/
+#undef DDRC_ODTCFG_RD_ODT_DELAY_DEFVAL 
+#undef DDRC_ODTCFG_RD_ODT_DELAY_SHIFT 
+#undef DDRC_ODTCFG_RD_ODT_DELAY_MASK 
+#define DDRC_ODTCFG_RD_ODT_DELAY_DEFVAL                                            0x04000400
+#define DDRC_ODTCFG_RD_ODT_DELAY_SHIFT                                             2
+#define DDRC_ODTCFG_RD_ODT_DELAY_MASK                                              0x0000007CU
+
+/*Indicates which remote ODTs must be turned on during a read from rank 1. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks*/
+#undef DDRC_ODTMAP_RANK1_RD_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK1_RD_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK1_RD_ODT_MASK 
+#define DDRC_ODTMAP_RANK1_RD_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK1_RD_ODT_SHIFT                                             12
+#define DDRC_ODTMAP_RANK1_RD_ODT_MASK                                              0x00003000U
+
+/*Indicates which remote ODTs must be turned on during a write to rank 1. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks*/
+#undef DDRC_ODTMAP_RANK1_WR_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK1_WR_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK1_WR_ODT_MASK 
+#define DDRC_ODTMAP_RANK1_WR_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK1_WR_ODT_SHIFT                                             8
+#define DDRC_ODTMAP_RANK1_WR_ODT_MASK                                              0x00000300U
+
+/*Indicates which remote ODTs must be turned on during a read from rank 0. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT.*/
+#undef DDRC_ODTMAP_RANK0_RD_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK0_RD_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK0_RD_ODT_MASK 
+#define DDRC_ODTMAP_RANK0_RD_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK0_RD_ODT_SHIFT                                             4
+#define DDRC_ODTMAP_RANK0_RD_ODT_MASK                                              0x00000030U
+
+/*Indicates which remote ODTs must be turned on during a write to rank 0. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT.*/
+#undef DDRC_ODTMAP_RANK0_WR_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK0_WR_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK0_WR_ODT_MASK 
+#define DDRC_ODTMAP_RANK0_WR_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK0_WR_ODT_SHIFT                                             0
+#define DDRC_ODTMAP_RANK0_WR_ODT_MASK                                              0x00000003U
+
+/*When the preferred transaction store is empty for these many clock cycles, switch to the alternate transaction store if it is
+		non-empty. The read transaction store (both high and low priority) is the default preferred transaction store and the write t
+		ansaction store is the alternative store. When prefer write over read is set this is reversed. 0x0 is a legal value for this 
+		egister. When set to 0x0, the transaction store switching will happen immediately when the switching conditions become true. 
+		OR PERFORMANCE ONLY*/
+#undef DDRC_SCHED_RDWR_IDLE_GAP_DEFVAL 
+#undef DDRC_SCHED_RDWR_IDLE_GAP_SHIFT 
+#undef DDRC_SCHED_RDWR_IDLE_GAP_MASK 
+#define DDRC_SCHED_RDWR_IDLE_GAP_DEFVAL                                            0x00002005
+#define DDRC_SCHED_RDWR_IDLE_GAP_SHIFT                                             24
+#define DDRC_SCHED_RDWR_IDLE_GAP_MASK                                              0x7F000000U
+
+/*UNUSED*/
+#undef DDRC_SCHED_GO2CRITICAL_HYSTERESIS_DEFVAL 
+#undef DDRC_SCHED_GO2CRITICAL_HYSTERESIS_SHIFT 
+#undef DDRC_SCHED_GO2CRITICAL_HYSTERESIS_MASK 
+#define DDRC_SCHED_GO2CRITICAL_HYSTERESIS_DEFVAL                                   0x00002005
+#define DDRC_SCHED_GO2CRITICAL_HYSTERESIS_SHIFT                                    16
+#define DDRC_SCHED_GO2CRITICAL_HYSTERESIS_MASK                                     0x00FF0000U
+
+/*Number of entries in the low priority transaction store is this value + 1. (MEMC_NO_OF_ENTRY - (SCHED.lpr_num_entries + 1)) i
+		 the number of entries available for the high priority transaction store. Setting this to maximum value allocates all entries
+		to low priority transaction store. Setting this to 0 allocates 1 entry to low priority transaction store and the rest to high
+		priority transaction store. Note: In ECC configurations, the numbers of write and low priority read credits issued is one les
+		 than in the non-ECC case. One entry each is reserved in the write and low-priority read CAMs for storing the RMW requests ar
+		sing out of single bit error correction RMW operation.*/
+#undef DDRC_SCHED_LPR_NUM_ENTRIES_DEFVAL 
+#undef DDRC_SCHED_LPR_NUM_ENTRIES_SHIFT 
+#undef DDRC_SCHED_LPR_NUM_ENTRIES_MASK 
+#define DDRC_SCHED_LPR_NUM_ENTRIES_DEFVAL                                          0x00002005
+#define DDRC_SCHED_LPR_NUM_ENTRIES_SHIFT                                           8
+#define DDRC_SCHED_LPR_NUM_ENTRIES_MASK                                            0x00003F00U
+
+/*If true, bank is kept open only while there are page hit transactions available in the CAM to that bank. The last read or wri
+		e command in the CAM with a bank and page hit will be executed with auto-precharge if SCHED1.pageclose_timer=0. Even if this 
+		egister set to 1 and SCHED1.pageclose_timer is set to 0, explicit precharge (and not auto-precharge) may be issued in some ca
+		es where there is a mode switch between Write and Read or between LPR and HPR. The Read and Write commands that are executed 
+		s part of the ECC scrub requests are also executed without auto-precharge. If false, the bank remains open until there is a n
+		ed to close it (to open a different page, or for page timeout or refresh timeout) - also known as open page policy. The open 
+		age policy can be overridden by setting the per-command-autopre bit on the HIF interface (hif_cmd_autopre). The pageclose fea
+		ure provids a midway between Open and Close page policies. FOR PERFORMANCE ONLY.*/
+#undef DDRC_SCHED_PAGECLOSE_DEFVAL 
+#undef DDRC_SCHED_PAGECLOSE_SHIFT 
+#undef DDRC_SCHED_PAGECLOSE_MASK 
+#define DDRC_SCHED_PAGECLOSE_DEFVAL                                                0x00002005
+#define DDRC_SCHED_PAGECLOSE_SHIFT                                                 2
+#define DDRC_SCHED_PAGECLOSE_MASK                                                  0x00000004U
+
+/*If set then the bank selector prefers writes over reads. FOR DEBUG ONLY.*/
+#undef DDRC_SCHED_PREFER_WRITE_DEFVAL 
+#undef DDRC_SCHED_PREFER_WRITE_SHIFT 
+#undef DDRC_SCHED_PREFER_WRITE_MASK 
+#define DDRC_SCHED_PREFER_WRITE_DEFVAL                                             0x00002005
+#define DDRC_SCHED_PREFER_WRITE_SHIFT                                              1
+#define DDRC_SCHED_PREFER_WRITE_MASK                                               0x00000002U
+
+/*Active low signal. When asserted ('0'), all incoming transactions are forced to low priority. This implies that all High Prio
+		ity Read (HPR) and Variable Priority Read commands (VPR) will be treated as Low Priority Read (LPR) commands. On the write si
+		e, all Variable Priority Write (VPW) commands will be treated as Normal Priority Write (NPW) commands. Forcing the incoming t
+		ansactions to low priority implicitly turns off Bypass path for read commands. FOR PERFORMANCE ONLY.*/
+#undef DDRC_SCHED_FORCE_LOW_PRI_N_DEFVAL 
+#undef DDRC_SCHED_FORCE_LOW_PRI_N_SHIFT 
+#undef DDRC_SCHED_FORCE_LOW_PRI_N_MASK 
+#define DDRC_SCHED_FORCE_LOW_PRI_N_DEFVAL                                          0x00002005
+#define DDRC_SCHED_FORCE_LOW_PRI_N_SHIFT                                           0
+#define DDRC_SCHED_FORCE_LOW_PRI_N_MASK                                            0x00000001U
+
+/*Number of transactions that are serviced once the LPR queue goes critical is the smaller of: - (a) This number - (b) Number o
+		 transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_DEFVAL 
+#undef DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_SHIFT 
+#undef DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_MASK 
+#define DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_DEFVAL                                   0x0F00007F
+#define DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_SHIFT                                    24
+#define DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_MASK                                     0xFF000000U
+
+/*Number of clocks that the LPR queue can be starved before it goes critical. The minimum valid functional value for this regis
+		er is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not
+		be disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFLPR1_LPR_MAX_STARVE_DEFVAL 
+#undef DDRC_PERFLPR1_LPR_MAX_STARVE_SHIFT 
+#undef DDRC_PERFLPR1_LPR_MAX_STARVE_MASK 
+#define DDRC_PERFLPR1_LPR_MAX_STARVE_DEFVAL                                        0x0F00007F
+#define DDRC_PERFLPR1_LPR_MAX_STARVE_SHIFT                                         0
+#define DDRC_PERFLPR1_LPR_MAX_STARVE_MASK                                          0x0000FFFFU
+
+/*Number of transactions that are serviced once the WR queue goes critical is the smaller of: - (a) This number - (b) Number of
+		transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFWR1_W_XACT_RUN_LENGTH_DEFVAL 
+#undef DDRC_PERFWR1_W_XACT_RUN_LENGTH_SHIFT 
+#undef DDRC_PERFWR1_W_XACT_RUN_LENGTH_MASK 
+#define DDRC_PERFWR1_W_XACT_RUN_LENGTH_DEFVAL                                      0x0F00007F
+#define DDRC_PERFWR1_W_XACT_RUN_LENGTH_SHIFT                                       24
+#define DDRC_PERFWR1_W_XACT_RUN_LENGTH_MASK                                        0xFF000000U
+
+/*Number of clocks that the WR queue can be starved before it goes critical. The minimum valid functional value for this regist
+		r is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not 
+		e disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFWR1_W_MAX_STARVE_DEFVAL 
+#undef DDRC_PERFWR1_W_MAX_STARVE_SHIFT 
+#undef DDRC_PERFWR1_W_MAX_STARVE_MASK 
+#define DDRC_PERFWR1_W_MAX_STARVE_DEFVAL                                           0x0F00007F
+#define DDRC_PERFWR1_W_MAX_STARVE_SHIFT                                            0
+#define DDRC_PERFWR1_W_MAX_STARVE_MASK                                             0x0000FFFFU
+
+/*All even ranks have the same DQ mapping controled by DQMAP0-4 register as rank 0. This register provides DQ swap function for
+		all odd ranks to support CRC feature. rank based DQ swapping is: swap bit 0 with 1, swap bit 2 with 3, swap bit 4 with 5 and 
+		wap bit 6 with 7. 1: Disable rank based DQ swapping 0: Enable rank based DQ swapping Present only in designs configured to su
+		port DDR4.*/
+#undef DDRC_DQMAP5_DIS_DQ_RANK_SWAP_DEFVAL 
+#undef DDRC_DQMAP5_DIS_DQ_RANK_SWAP_SHIFT 
+#undef DDRC_DQMAP5_DIS_DQ_RANK_SWAP_MASK 
+#define DDRC_DQMAP5_DIS_DQ_RANK_SWAP_DEFVAL                                        
+#define DDRC_DQMAP5_DIS_DQ_RANK_SWAP_SHIFT                                         0
+#define DDRC_DQMAP5_DIS_DQ_RANK_SWAP_MASK                                          0x00000001U
+
+/*When this is set to '0', auto-precharge is disabled for the flushed command in a collision case. Collision cases are write fo
+		lowed by read to same address, read followed by write to same address, or write followed by write to same address with DBG0.d
+		s_wc bit = 1 (where same address comparisons exclude the two address bits representing critical word). FOR DEBUG ONLY.*/
+#undef DDRC_DBG0_DIS_COLLISION_PAGE_OPT_DEFVAL 
+#undef DDRC_DBG0_DIS_COLLISION_PAGE_OPT_SHIFT 
+#undef DDRC_DBG0_DIS_COLLISION_PAGE_OPT_MASK 
+#define DDRC_DBG0_DIS_COLLISION_PAGE_OPT_DEFVAL                                    0x00000000
+#define DDRC_DBG0_DIS_COLLISION_PAGE_OPT_SHIFT                                     4
+#define DDRC_DBG0_DIS_COLLISION_PAGE_OPT_MASK                                      0x00000010U
+
+/*When 1, disable write combine. FOR DEBUG ONLY*/
+#undef DDRC_DBG0_DIS_WC_DEFVAL 
+#undef DDRC_DBG0_DIS_WC_SHIFT 
+#undef DDRC_DBG0_DIS_WC_MASK 
+#define DDRC_DBG0_DIS_WC_DEFVAL                                                    0x00000000
+#define DDRC_DBG0_DIS_WC_SHIFT                                                     0
+#define DDRC_DBG0_DIS_WC_MASK                                                      0x00000001U
+
+/*Setting this register bit to 1 allows refresh and ZQCS commands to be triggered from hardware via the IOs ext_*. If set to 1,
+		the fields DBGCMD.zq_calib_short and DBGCMD.rank*_refresh have no function, and are ignored by the uMCTL2 logic. Setting this
+		register bit to 0 allows refresh and ZQCS to be triggered from software, via the fields DBGCMD.zq_calib_short and DBGCMD.rank
+		_refresh. If set to 0, the hardware pins ext_* have no function, and are ignored by the uMCTL2 logic. This register is static
+		 and may only be changed when the DDRC reset signal, core_ddrc_rstn, is asserted (0).*/
+#undef DDRC_DBGCMD_HW_REF_ZQ_EN_DEFVAL 
+#undef DDRC_DBGCMD_HW_REF_ZQ_EN_SHIFT 
+#undef DDRC_DBGCMD_HW_REF_ZQ_EN_MASK 
+#define DDRC_DBGCMD_HW_REF_ZQ_EN_DEFVAL                                            0x00000000
+#define DDRC_DBGCMD_HW_REF_ZQ_EN_SHIFT                                             31
+#define DDRC_DBGCMD_HW_REF_ZQ_EN_MASK                                              0x80000000U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a dfi_ctrlupd_req to the PHY. When this request is stored in 
+		he uMCTL2, the bit is automatically cleared. This operation must only be performed when DFIUPD0.dis_auto_ctrlupd=1.*/
+#undef DDRC_DBGCMD_CTRLUPD_DEFVAL 
+#undef DDRC_DBGCMD_CTRLUPD_SHIFT 
+#undef DDRC_DBGCMD_CTRLUPD_MASK 
+#define DDRC_DBGCMD_CTRLUPD_DEFVAL                                                 0x00000000
+#define DDRC_DBGCMD_CTRLUPD_SHIFT                                                  5
+#define DDRC_DBGCMD_CTRLUPD_MASK                                                   0x00000020U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a ZQCS (ZQ calibration short)/MPC(ZQ calibration) command to 
+		he SDRAM. When this request is stored in the uMCTL2, the bit is automatically cleared. This operation can be performed only w
+		en ZQCTL0.dis_auto_zq=1. It is recommended NOT to set this register bit if in Init operating mode. This register bit is ignor
+		d when in Self-Refresh(except LPDDR4) and SR-Powerdown(LPDDR4) and Deep power-down operating modes and Maximum Power Saving M
+		de.*/
+#undef DDRC_DBGCMD_ZQ_CALIB_SHORT_DEFVAL 
+#undef DDRC_DBGCMD_ZQ_CALIB_SHORT_SHIFT 
+#undef DDRC_DBGCMD_ZQ_CALIB_SHORT_MASK 
+#define DDRC_DBGCMD_ZQ_CALIB_SHORT_DEFVAL                                          0x00000000
+#define DDRC_DBGCMD_ZQ_CALIB_SHORT_SHIFT                                           4
+#define DDRC_DBGCMD_ZQ_CALIB_SHORT_MASK                                            0x00000010U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 1. Writing to this bit causes DBGSTAT.rank1
+		refresh_busy to be set. When DBGSTAT.rank1_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.*/
+#undef DDRC_DBGCMD_RANK1_REFRESH_DEFVAL 
+#undef DDRC_DBGCMD_RANK1_REFRESH_SHIFT 
+#undef DDRC_DBGCMD_RANK1_REFRESH_MASK 
+#define DDRC_DBGCMD_RANK1_REFRESH_DEFVAL                                           0x00000000
+#define DDRC_DBGCMD_RANK1_REFRESH_SHIFT                                            1
+#define DDRC_DBGCMD_RANK1_REFRESH_MASK                                             0x00000002U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 0. Writing to this bit causes DBGSTAT.rank0
+		refresh_busy to be set. When DBGSTAT.rank0_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.*/
+#undef DDRC_DBGCMD_RANK0_REFRESH_DEFVAL 
+#undef DDRC_DBGCMD_RANK0_REFRESH_SHIFT 
+#undef DDRC_DBGCMD_RANK0_REFRESH_MASK 
+#define DDRC_DBGCMD_RANK0_REFRESH_DEFVAL                                           0x00000000
+#define DDRC_DBGCMD_RANK0_REFRESH_SHIFT                                            0
+#define DDRC_DBGCMD_RANK0_REFRESH_MASK                                             0x00000001U
+
+/*Enable quasi-dynamic register programming outside reset. Program register to 0 to enable quasi-dynamic programming. Set back 
+		egister to 1 once programming is done.*/
+#undef DDRC_SWCTL_SW_DONE_DEFVAL 
+#undef DDRC_SWCTL_SW_DONE_SHIFT 
+#undef DDRC_SWCTL_SW_DONE_MASK 
+#define DDRC_SWCTL_SW_DONE_DEFVAL                                                  
+#define DDRC_SWCTL_SW_DONE_SHIFT                                                   0
+#define DDRC_SWCTL_SW_DONE_MASK                                                    0x00000001U
+
+/*Burst length expansion mode. By default (i.e. bl_exp_mode==0) XPI expands every AXI burst into multiple HIF commands, using t
+		e memory burst length as a unit. If set to 1, then XPI will use half of the memory burst length as a unit. This applies to bo
+		h reads and writes. When MSTR.data_bus_width==00, setting bl_exp_mode to 1 has no effect. This can be used in cases where Par
+		ial Writes is enabled (UMCTL2_PARTIAL_WR=1) and DBG0.dis_wc=1, in order to avoid or minimize t_ccd_l penalty in DDR4 and t_cc
+		_mw penalty in LPDDR4. Note that if DBICTL.reg_ddrc_dm_en=0, functionality is not supported in the following cases: - UMCTL2_
+		ARTIAL_WR=0 - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=8 and MSTR.reg_ddrc_burst_rdwr=1000 (LP
+		DR4 only) - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=4 and MSTR.reg_ddrc_burst_rdwr=0100 (DDR4
+		only), with either MSTR.reg_ddrc_burstchop=0 or CRCPARCTL1.reg_ddrc_crc_enable=1 Functionality is also not supported if Share
+		-AC is enabled*/
+#undef DDRC_PCCFG_BL_EXP_MODE_DEFVAL 
+#undef DDRC_PCCFG_BL_EXP_MODE_SHIFT 
+#undef DDRC_PCCFG_BL_EXP_MODE_MASK 
+#define DDRC_PCCFG_BL_EXP_MODE_DEFVAL                                              0x00000000
+#define DDRC_PCCFG_BL_EXP_MODE_SHIFT                                               8
+#define DDRC_PCCFG_BL_EXP_MODE_MASK                                                0x00000100U
+
+/*Page match four limit. If set to 1, limits the number of consecutive same page DDRC transactions that can be granted by the P
+		rt Arbiter to four when Page Match feature is enabled. If set to 0, there is no limit imposed on number of consecutive same p
+		ge DDRC transactions.*/
+#undef DDRC_PCCFG_PAGEMATCH_LIMIT_DEFVAL 
+#undef DDRC_PCCFG_PAGEMATCH_LIMIT_SHIFT 
+#undef DDRC_PCCFG_PAGEMATCH_LIMIT_MASK 
+#define DDRC_PCCFG_PAGEMATCH_LIMIT_DEFVAL                                          0x00000000
+#define DDRC_PCCFG_PAGEMATCH_LIMIT_SHIFT                                           4
+#define DDRC_PCCFG_PAGEMATCH_LIMIT_MASK                                            0x00000010U
+
+/*If set to 1 (enabled), sets co_gs_go2critical_wr and co_gs_go2critical_lpr/co_gs_go2critical_hpr signals going to DDRC based 
+		n urgent input (awurgent, arurgent) coming from AXI master. If set to 0 (disabled), co_gs_go2critical_wr and co_gs_go2critica
+		_lpr/co_gs_go2critical_hpr signals at DDRC are driven to 1b'0.*/
+#undef DDRC_PCCFG_GO2CRITICAL_EN_DEFVAL 
+#undef DDRC_PCCFG_GO2CRITICAL_EN_SHIFT 
+#undef DDRC_PCCFG_GO2CRITICAL_EN_MASK 
+#define DDRC_PCCFG_GO2CRITICAL_EN_DEFVAL                                           0x00000000
+#define DDRC_PCCFG_GO2CRITICAL_EN_SHIFT                                            0
+#define DDRC_PCCFG_GO2CRITICAL_EN_MASK                                             0x00000001U
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_0_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_0_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_0_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_0_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_0_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_0_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_0_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_0_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_0_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_0_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_0_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_0_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_0_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_0_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_0_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_0_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_0_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_0_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_0_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_0_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_0_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_0_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_0_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_0_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_0_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_0_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_0_PORT_EN_MASK 
+#define DDRC_PCTRL_0_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_0_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_0_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_1_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_1_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_1_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_1_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_1_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_1_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_1_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_1_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_1_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_1_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_1_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_1_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_1_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_1_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_1_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_1_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_1_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_1_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_1_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_1_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_1_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_1_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_1_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_1_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_1_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_1_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_1_PORT_EN_MASK 
+#define DDRC_PCTRL_1_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_1_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_1_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_SHIFT                                     24
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_MASK                                      0x03000000U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_SHIFT                                      8
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_MASK                                       0x00000F00U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_2_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_2_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_2_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_2_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_2_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_2_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_2_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_2_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_2_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_2_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_2_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_2_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_2_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_2_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_2_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_2_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_2_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_2_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_2_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_2_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_2_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_2_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_2_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_2_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_2_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_2_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_2_PORT_EN_MASK 
+#define DDRC_PCTRL_2_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_2_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_2_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_SHIFT                                     24
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_MASK                                      0x03000000U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_SHIFT                                      8
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_MASK                                       0x00000F00U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_3_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_3_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_3_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_3_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_3_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_3_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_3_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_3_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_3_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_3_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_3_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_3_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_3_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_3_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_3_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_3_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_3_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_3_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_3_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_3_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_3_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_3_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_3_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_3_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_3_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_3_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_3_PORT_EN_MASK 
+#define DDRC_PCTRL_3_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_3_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_3_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.*/
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_SHIFT                                    20
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_MASK                                     0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.*/
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_SHIFT                                    16
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_MASK                                     0x00030000U
+
+/*Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.*/
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_DEFVAL 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_SHIFT 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_MASK 
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_DEFVAL                                     0x00000000
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_SHIFT                                      0
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for write transactions.*/
+#undef DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_DEFVAL 
+#undef DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_SHIFT 
+#undef DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_MASK 
+#define DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_DEFVAL                                   
+#define DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_SHIFT                                    0
+#define DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_4_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_4_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_4_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_4_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_4_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_4_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_4_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_4_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_4_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_4_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_4_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_4_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_4_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_4_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_4_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_4_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_4_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_4_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_4_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_4_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_4_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_4_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_4_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_4_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_4_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_4_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_4_PORT_EN_MASK 
+#define DDRC_PCTRL_4_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_4_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_4_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.*/
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_SHIFT                                    20
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_MASK                                     0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.*/
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_SHIFT                                    16
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_MASK                                     0x00030000U
+
+/*Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.*/
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_DEFVAL 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_SHIFT 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_MASK 
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_DEFVAL                                     0x00000000
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_SHIFT                                      0
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for write transactions.*/
+#undef DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_DEFVAL 
+#undef DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_SHIFT 
+#undef DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_MASK 
+#define DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_DEFVAL                                   
+#define DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_SHIFT                                    0
+#define DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_5_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_5_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_5_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_5_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_5_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_5_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_5_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_5_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_5_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_5_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_5_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_5_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_5_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_5_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_5_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_5_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_5_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_5_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_5_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_5_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_5_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_5_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_5_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_5_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_5_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_5_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_5_PORT_EN_MASK 
+#define DDRC_PCTRL_5_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_5_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_5_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.*/
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_SHIFT                                    20
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_MASK                                     0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.*/
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_SHIFT                                    16
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_MASK                                     0x00030000U
+
+/*Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.*/
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_DEFVAL 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_SHIFT 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_MASK 
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_DEFVAL                                     0x00000000
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_SHIFT                                      0
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for write transactions.*/
+#undef DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_DEFVAL 
+#undef DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_SHIFT 
+#undef DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_MASK 
+#define DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_DEFVAL                                   
+#define DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_SHIFT                                    0
+#define DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_MASK                                     0x000007FFU
+
+/*Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).*/
+#undef DDRC_SARBASE0_BASE_ADDR_DEFVAL 
+#undef DDRC_SARBASE0_BASE_ADDR_SHIFT 
+#undef DDRC_SARBASE0_BASE_ADDR_MASK 
+#define DDRC_SARBASE0_BASE_ADDR_DEFVAL                                             
+#define DDRC_SARBASE0_BASE_ADDR_SHIFT                                              0
+#define DDRC_SARBASE0_BASE_ADDR_MASK                                               0x000001FFU
+
+/*Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.*/
+#undef DDRC_SARSIZE0_NBLOCKS_DEFVAL 
+#undef DDRC_SARSIZE0_NBLOCKS_SHIFT 
+#undef DDRC_SARSIZE0_NBLOCKS_MASK 
+#define DDRC_SARSIZE0_NBLOCKS_DEFVAL                                               
+#define DDRC_SARSIZE0_NBLOCKS_SHIFT                                                0
+#define DDRC_SARSIZE0_NBLOCKS_MASK                                                 0x000000FFU
+
+/*Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).*/
+#undef DDRC_SARBASE1_BASE_ADDR_DEFVAL 
+#undef DDRC_SARBASE1_BASE_ADDR_SHIFT 
+#undef DDRC_SARBASE1_BASE_ADDR_MASK 
+#define DDRC_SARBASE1_BASE_ADDR_DEFVAL                                             
+#define DDRC_SARBASE1_BASE_ADDR_SHIFT                                              0
+#define DDRC_SARBASE1_BASE_ADDR_MASK                                               0x000001FFU
+
+/*Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.*/
+#undef DDRC_SARSIZE1_NBLOCKS_DEFVAL 
+#undef DDRC_SARSIZE1_NBLOCKS_SHIFT 
+#undef DDRC_SARSIZE1_NBLOCKS_MASK 
+#define DDRC_SARSIZE1_NBLOCKS_DEFVAL                                               
+#define DDRC_SARSIZE1_NBLOCKS_SHIFT                                                0
+#define DDRC_SARSIZE1_NBLOCKS_MASK                                                 0x000000FFU
+
+/*Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_DEFVAL                                0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_SHIFT                                 24
+#define DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_MASK                                  0x1F000000U
+
+/*Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_DEFVAL                              0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_SHIFT                               23
+#define DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_MASK                                0x00800000U
+
+/*Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks*/
+#undef DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_DEFVAL                                 0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_SHIFT                                  16
+#define DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_MASK                                   0x003F0000U
+
+/*Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_DEFVAL                              0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_SHIFT                               15
+#define DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_MASK                                0x00008000U
+
+/*Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks*/
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_DEFVAL                                 0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_SHIFT                                  8
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_MASK                                   0x00003F00U
+
+/*Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_DEFVAL                                  0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_SHIFT                                   0
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_MASK                                    0x0000003FU
+
+/*DDR block level reset inside of the DDR Sub System*/
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_MASK 
+#define CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL                                        0x0000000F
+#define CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT                                         3
+#define CRF_APB_RST_DDR_SS_DDR_RESET_MASK                                          0x00000008U
+
+/*Address Copy*/
+#undef DDR_PHY_PGCR0_ADCP_DEFVAL 
+#undef DDR_PHY_PGCR0_ADCP_SHIFT 
+#undef DDR_PHY_PGCR0_ADCP_MASK 
+#define DDR_PHY_PGCR0_ADCP_DEFVAL                                                  0x07001E00
+#define DDR_PHY_PGCR0_ADCP_SHIFT                                                   31
+#define DDR_PHY_PGCR0_ADCP_MASK                                                    0x80000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_30_27_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_30_27_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_30_27_MASK 
+#define DDR_PHY_PGCR0_RESERVED_30_27_DEFVAL                                        0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_30_27_SHIFT                                         27
+#define DDR_PHY_PGCR0_RESERVED_30_27_MASK                                          0x78000000U
+
+/*PHY FIFO Reset*/
+#undef DDR_PHY_PGCR0_PHYFRST_DEFVAL 
+#undef DDR_PHY_PGCR0_PHYFRST_SHIFT 
+#undef DDR_PHY_PGCR0_PHYFRST_MASK 
+#define DDR_PHY_PGCR0_PHYFRST_DEFVAL                                               0x07001E00
+#define DDR_PHY_PGCR0_PHYFRST_SHIFT                                                26
+#define DDR_PHY_PGCR0_PHYFRST_MASK                                                 0x04000000U
+
+/*Oscillator Mode Address/Command Delay Line Select*/
+#undef DDR_PHY_PGCR0_OSCACDL_DEFVAL 
+#undef DDR_PHY_PGCR0_OSCACDL_SHIFT 
+#undef DDR_PHY_PGCR0_OSCACDL_MASK 
+#define DDR_PHY_PGCR0_OSCACDL_DEFVAL                                               0x07001E00
+#define DDR_PHY_PGCR0_OSCACDL_SHIFT                                                24
+#define DDR_PHY_PGCR0_OSCACDL_MASK                                                 0x03000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_23_19_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_23_19_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_23_19_MASK 
+#define DDR_PHY_PGCR0_RESERVED_23_19_DEFVAL                                        0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_23_19_SHIFT                                         19
+#define DDR_PHY_PGCR0_RESERVED_23_19_MASK                                          0x00F80000U
+
+/*Digital Test Output Select*/
+#undef DDR_PHY_PGCR0_DTOSEL_DEFVAL 
+#undef DDR_PHY_PGCR0_DTOSEL_SHIFT 
+#undef DDR_PHY_PGCR0_DTOSEL_MASK 
+#define DDR_PHY_PGCR0_DTOSEL_DEFVAL                                                0x07001E00
+#define DDR_PHY_PGCR0_DTOSEL_SHIFT                                                 14
+#define DDR_PHY_PGCR0_DTOSEL_MASK                                                  0x0007C000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_13_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_13_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_13_MASK 
+#define DDR_PHY_PGCR0_RESERVED_13_DEFVAL                                           0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_13_SHIFT                                            13
+#define DDR_PHY_PGCR0_RESERVED_13_MASK                                             0x00002000U
+
+/*Oscillator Mode Division*/
+#undef DDR_PHY_PGCR0_OSCDIV_DEFVAL 
+#undef DDR_PHY_PGCR0_OSCDIV_SHIFT 
+#undef DDR_PHY_PGCR0_OSCDIV_MASK 
+#define DDR_PHY_PGCR0_OSCDIV_DEFVAL                                                0x07001E00
+#define DDR_PHY_PGCR0_OSCDIV_SHIFT                                                 9
+#define DDR_PHY_PGCR0_OSCDIV_MASK                                                  0x00001E00U
+
+/*Oscillator Enable*/
+#undef DDR_PHY_PGCR0_OSCEN_DEFVAL 
+#undef DDR_PHY_PGCR0_OSCEN_SHIFT 
+#undef DDR_PHY_PGCR0_OSCEN_MASK 
+#define DDR_PHY_PGCR0_OSCEN_DEFVAL                                                 0x07001E00
+#define DDR_PHY_PGCR0_OSCEN_SHIFT                                                  8
+#define DDR_PHY_PGCR0_OSCEN_MASK                                                   0x00000100U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_7_0_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_7_0_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_7_0_MASK 
+#define DDR_PHY_PGCR0_RESERVED_7_0_DEFVAL                                          0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_7_0_SHIFT                                           0
+#define DDR_PHY_PGCR0_RESERVED_7_0_MASK                                            0x000000FFU
+
+/*Clear Training Status Registers*/
+#undef DDR_PHY_PGCR2_CLRTSTAT_DEFVAL 
+#undef DDR_PHY_PGCR2_CLRTSTAT_SHIFT 
+#undef DDR_PHY_PGCR2_CLRTSTAT_MASK 
+#define DDR_PHY_PGCR2_CLRTSTAT_DEFVAL                                              0x00F12480
+#define DDR_PHY_PGCR2_CLRTSTAT_SHIFT                                               31
+#define DDR_PHY_PGCR2_CLRTSTAT_MASK                                                0x80000000U
+
+/*Clear Impedance Calibration*/
+#undef DDR_PHY_PGCR2_CLRZCAL_DEFVAL 
+#undef DDR_PHY_PGCR2_CLRZCAL_SHIFT 
+#undef DDR_PHY_PGCR2_CLRZCAL_MASK 
+#define DDR_PHY_PGCR2_CLRZCAL_DEFVAL                                               0x00F12480
+#define DDR_PHY_PGCR2_CLRZCAL_SHIFT                                                30
+#define DDR_PHY_PGCR2_CLRZCAL_MASK                                                 0x40000000U
+
+/*Clear Parity Error*/
+#undef DDR_PHY_PGCR2_CLRPERR_DEFVAL 
+#undef DDR_PHY_PGCR2_CLRPERR_SHIFT 
+#undef DDR_PHY_PGCR2_CLRPERR_MASK 
+#define DDR_PHY_PGCR2_CLRPERR_DEFVAL                                               0x00F12480
+#define DDR_PHY_PGCR2_CLRPERR_SHIFT                                                29
+#define DDR_PHY_PGCR2_CLRPERR_MASK                                                 0x20000000U
+
+/*Initialization Complete Pin Configuration*/
+#undef DDR_PHY_PGCR2_ICPC_DEFVAL 
+#undef DDR_PHY_PGCR2_ICPC_SHIFT 
+#undef DDR_PHY_PGCR2_ICPC_MASK 
+#define DDR_PHY_PGCR2_ICPC_DEFVAL                                                  0x00F12480
+#define DDR_PHY_PGCR2_ICPC_SHIFT                                                   28
+#define DDR_PHY_PGCR2_ICPC_MASK                                                    0x10000000U
+
+/*Data Training PUB Mode Exit Timer*/
+#undef DDR_PHY_PGCR2_DTPMXTMR_DEFVAL 
+#undef DDR_PHY_PGCR2_DTPMXTMR_SHIFT 
+#undef DDR_PHY_PGCR2_DTPMXTMR_MASK 
+#define DDR_PHY_PGCR2_DTPMXTMR_DEFVAL                                              0x00F12480
+#define DDR_PHY_PGCR2_DTPMXTMR_SHIFT                                               20
+#define DDR_PHY_PGCR2_DTPMXTMR_MASK                                                0x0FF00000U
+
+/*Initialization Bypass*/
+#undef DDR_PHY_PGCR2_INITFSMBYP_DEFVAL 
+#undef DDR_PHY_PGCR2_INITFSMBYP_SHIFT 
+#undef DDR_PHY_PGCR2_INITFSMBYP_MASK 
+#define DDR_PHY_PGCR2_INITFSMBYP_DEFVAL                                            0x00F12480
+#define DDR_PHY_PGCR2_INITFSMBYP_SHIFT                                             19
+#define DDR_PHY_PGCR2_INITFSMBYP_MASK                                              0x00080000U
+
+/*PLL FSM Bypass*/
+#undef DDR_PHY_PGCR2_PLLFSMBYP_DEFVAL 
+#undef DDR_PHY_PGCR2_PLLFSMBYP_SHIFT 
+#undef DDR_PHY_PGCR2_PLLFSMBYP_MASK 
+#define DDR_PHY_PGCR2_PLLFSMBYP_DEFVAL                                             0x00F12480
+#define DDR_PHY_PGCR2_PLLFSMBYP_SHIFT                                              18
+#define DDR_PHY_PGCR2_PLLFSMBYP_MASK                                               0x00040000U
+
+/*Refresh Period*/
+#undef DDR_PHY_PGCR2_TREFPRD_DEFVAL 
+#undef DDR_PHY_PGCR2_TREFPRD_SHIFT 
+#undef DDR_PHY_PGCR2_TREFPRD_MASK 
+#define DDR_PHY_PGCR2_TREFPRD_DEFVAL                                               0x00F12480
+#define DDR_PHY_PGCR2_TREFPRD_SHIFT                                                0
+#define DDR_PHY_PGCR2_TREFPRD_MASK                                                 0x0003FFFFU
+
+/*Frequency B Ratio Term*/
+#undef DDR_PHY_PGCR5_FRQBT_DEFVAL 
+#undef DDR_PHY_PGCR5_FRQBT_SHIFT 
+#undef DDR_PHY_PGCR5_FRQBT_MASK 
+#define DDR_PHY_PGCR5_FRQBT_DEFVAL                                                 0x01010000
+#define DDR_PHY_PGCR5_FRQBT_SHIFT                                                  24
+#define DDR_PHY_PGCR5_FRQBT_MASK                                                   0xFF000000U
+
+/*Frequency A Ratio Term*/
+#undef DDR_PHY_PGCR5_FRQAT_DEFVAL 
+#undef DDR_PHY_PGCR5_FRQAT_SHIFT 
+#undef DDR_PHY_PGCR5_FRQAT_MASK 
+#define DDR_PHY_PGCR5_FRQAT_DEFVAL                                                 0x01010000
+#define DDR_PHY_PGCR5_FRQAT_SHIFT                                                  16
+#define DDR_PHY_PGCR5_FRQAT_MASK                                                   0x00FF0000U
+
+/*DFI Disconnect Time Period*/
+#undef DDR_PHY_PGCR5_DISCNPERIOD_DEFVAL 
+#undef DDR_PHY_PGCR5_DISCNPERIOD_SHIFT 
+#undef DDR_PHY_PGCR5_DISCNPERIOD_MASK 
+#define DDR_PHY_PGCR5_DISCNPERIOD_DEFVAL                                           0x01010000
+#define DDR_PHY_PGCR5_DISCNPERIOD_SHIFT                                            8
+#define DDR_PHY_PGCR5_DISCNPERIOD_MASK                                             0x0000FF00U
+
+/*Receiver bias core side control*/
+#undef DDR_PHY_PGCR5_VREF_RBCTRL_DEFVAL 
+#undef DDR_PHY_PGCR5_VREF_RBCTRL_SHIFT 
+#undef DDR_PHY_PGCR5_VREF_RBCTRL_MASK 
+#define DDR_PHY_PGCR5_VREF_RBCTRL_DEFVAL                                           0x01010000
+#define DDR_PHY_PGCR5_VREF_RBCTRL_SHIFT                                            4
+#define DDR_PHY_PGCR5_VREF_RBCTRL_MASK                                             0x000000F0U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PGCR5_RESERVED_3_DEFVAL 
+#undef DDR_PHY_PGCR5_RESERVED_3_SHIFT 
+#undef DDR_PHY_PGCR5_RESERVED_3_MASK 
+#define DDR_PHY_PGCR5_RESERVED_3_DEFVAL                                            0x01010000
+#define DDR_PHY_PGCR5_RESERVED_3_SHIFT                                             3
+#define DDR_PHY_PGCR5_RESERVED_3_MASK                                              0x00000008U
+
+/*Internal VREF generator REFSEL ragne select*/
+#undef DDR_PHY_PGCR5_DXREFISELRANGE_DEFVAL 
+#undef DDR_PHY_PGCR5_DXREFISELRANGE_SHIFT 
+#undef DDR_PHY_PGCR5_DXREFISELRANGE_MASK 
+#define DDR_PHY_PGCR5_DXREFISELRANGE_DEFVAL                                        0x01010000
+#define DDR_PHY_PGCR5_DXREFISELRANGE_SHIFT                                         2
+#define DDR_PHY_PGCR5_DXREFISELRANGE_MASK                                          0x00000004U
+
+/*DDL Page Read Write select*/
+#undef DDR_PHY_PGCR5_DDLPGACT_DEFVAL 
+#undef DDR_PHY_PGCR5_DDLPGACT_SHIFT 
+#undef DDR_PHY_PGCR5_DDLPGACT_MASK 
+#define DDR_PHY_PGCR5_DDLPGACT_DEFVAL                                              0x01010000
+#define DDR_PHY_PGCR5_DDLPGACT_SHIFT                                               1
+#define DDR_PHY_PGCR5_DDLPGACT_MASK                                                0x00000002U
+
+/*DDL Page Read Write select*/
+#undef DDR_PHY_PGCR5_DDLPGRW_DEFVAL 
+#undef DDR_PHY_PGCR5_DDLPGRW_SHIFT 
+#undef DDR_PHY_PGCR5_DDLPGRW_MASK 
+#define DDR_PHY_PGCR5_DDLPGRW_DEFVAL                                               0x01010000
+#define DDR_PHY_PGCR5_DDLPGRW_SHIFT                                                0
+#define DDR_PHY_PGCR5_DDLPGRW_MASK                                                 0x00000001U
+
+/*PLL Power-Down Time*/
+#undef DDR_PHY_PTR0_TPLLPD_DEFVAL 
+#undef DDR_PHY_PTR0_TPLLPD_SHIFT 
+#undef DDR_PHY_PTR0_TPLLPD_MASK 
+#define DDR_PHY_PTR0_TPLLPD_DEFVAL                                                 0x42C21590
+#define DDR_PHY_PTR0_TPLLPD_SHIFT                                                  21
+#define DDR_PHY_PTR0_TPLLPD_MASK                                                   0xFFE00000U
+
+/*PLL Gear Shift Time*/
+#undef DDR_PHY_PTR0_TPLLGS_DEFVAL 
+#undef DDR_PHY_PTR0_TPLLGS_SHIFT 
+#undef DDR_PHY_PTR0_TPLLGS_MASK 
+#define DDR_PHY_PTR0_TPLLGS_DEFVAL                                                 0x42C21590
+#define DDR_PHY_PTR0_TPLLGS_SHIFT                                                  6
+#define DDR_PHY_PTR0_TPLLGS_MASK                                                   0x001FFFC0U
+
+/*PHY Reset Time*/
+#undef DDR_PHY_PTR0_TPHYRST_DEFVAL 
+#undef DDR_PHY_PTR0_TPHYRST_SHIFT 
+#undef DDR_PHY_PTR0_TPHYRST_MASK 
+#define DDR_PHY_PTR0_TPHYRST_DEFVAL                                                0x42C21590
+#define DDR_PHY_PTR0_TPHYRST_SHIFT                                                 0
+#define DDR_PHY_PTR0_TPHYRST_MASK                                                  0x0000003FU
+
+/*PLL Lock Time*/
+#undef DDR_PHY_PTR1_TPLLLOCK_DEFVAL 
+#undef DDR_PHY_PTR1_TPLLLOCK_SHIFT 
+#undef DDR_PHY_PTR1_TPLLLOCK_MASK 
+#define DDR_PHY_PTR1_TPLLLOCK_DEFVAL                                               0xD05612C0
+#define DDR_PHY_PTR1_TPLLLOCK_SHIFT                                                16
+#define DDR_PHY_PTR1_TPLLLOCK_MASK                                                 0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PTR1_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_PTR1_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_PTR1_RESERVED_15_13_MASK 
+#define DDR_PHY_PTR1_RESERVED_15_13_DEFVAL                                         0xD05612C0
+#define DDR_PHY_PTR1_RESERVED_15_13_SHIFT                                          13
+#define DDR_PHY_PTR1_RESERVED_15_13_MASK                                           0x0000E000U
+
+/*PLL Reset Time*/
+#undef DDR_PHY_PTR1_TPLLRST_DEFVAL 
+#undef DDR_PHY_PTR1_TPLLRST_SHIFT 
+#undef DDR_PHY_PTR1_TPLLRST_MASK 
+#define DDR_PHY_PTR1_TPLLRST_DEFVAL                                                0xD05612C0
+#define DDR_PHY_PTR1_TPLLRST_SHIFT                                                 0
+#define DDR_PHY_PTR1_TPLLRST_MASK                                                  0x00001FFFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DSGCR_RESERVED_31_28_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_31_28_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_31_28_MASK 
+#define DDR_PHY_DSGCR_RESERVED_31_28_DEFVAL                                        0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_31_28_SHIFT                                         28
+#define DDR_PHY_DSGCR_RESERVED_31_28_MASK                                          0xF0000000U
+
+/*When RDBI enabled, this bit is used to select RDBI CL calculation, if it is 1b1, calculation will use RDBICL, otherwise use d
+		fault calculation.*/
+#undef DDR_PHY_DSGCR_RDBICLSEL_DEFVAL 
+#undef DDR_PHY_DSGCR_RDBICLSEL_SHIFT 
+#undef DDR_PHY_DSGCR_RDBICLSEL_MASK 
+#define DDR_PHY_DSGCR_RDBICLSEL_DEFVAL                                             0x02A04101
+#define DDR_PHY_DSGCR_RDBICLSEL_SHIFT                                              27
+#define DDR_PHY_DSGCR_RDBICLSEL_MASK                                               0x08000000U
+
+/*When RDBI enabled, if RDBICLSEL is asserted, RDBI CL adjust using this value.*/
+#undef DDR_PHY_DSGCR_RDBICL_DEFVAL 
+#undef DDR_PHY_DSGCR_RDBICL_SHIFT 
+#undef DDR_PHY_DSGCR_RDBICL_MASK 
+#define DDR_PHY_DSGCR_RDBICL_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_RDBICL_SHIFT                                                 24
+#define DDR_PHY_DSGCR_RDBICL_MASK                                                  0x07000000U
+
+/*PHY Impedance Update Enable*/
+#undef DDR_PHY_DSGCR_PHYZUEN_DEFVAL 
+#undef DDR_PHY_DSGCR_PHYZUEN_SHIFT 
+#undef DDR_PHY_DSGCR_PHYZUEN_MASK 
+#define DDR_PHY_DSGCR_PHYZUEN_DEFVAL                                               0x02A04101
+#define DDR_PHY_DSGCR_PHYZUEN_SHIFT                                                23
+#define DDR_PHY_DSGCR_PHYZUEN_MASK                                                 0x00800000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DSGCR_RESERVED_22_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_22_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_22_MASK 
+#define DDR_PHY_DSGCR_RESERVED_22_DEFVAL                                           0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_22_SHIFT                                            22
+#define DDR_PHY_DSGCR_RESERVED_22_MASK                                             0x00400000U
+
+/*SDRAM Reset Output Enable*/
+#undef DDR_PHY_DSGCR_RSTOE_DEFVAL 
+#undef DDR_PHY_DSGCR_RSTOE_SHIFT 
+#undef DDR_PHY_DSGCR_RSTOE_MASK 
+#define DDR_PHY_DSGCR_RSTOE_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_RSTOE_SHIFT                                                  21
+#define DDR_PHY_DSGCR_RSTOE_MASK                                                   0x00200000U
+
+/*Single Data Rate Mode*/
+#undef DDR_PHY_DSGCR_SDRMODE_DEFVAL 
+#undef DDR_PHY_DSGCR_SDRMODE_SHIFT 
+#undef DDR_PHY_DSGCR_SDRMODE_MASK 
+#define DDR_PHY_DSGCR_SDRMODE_DEFVAL                                               0x02A04101
+#define DDR_PHY_DSGCR_SDRMODE_SHIFT                                                19
+#define DDR_PHY_DSGCR_SDRMODE_MASK                                                 0x00180000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DSGCR_RESERVED_18_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_18_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_18_MASK 
+#define DDR_PHY_DSGCR_RESERVED_18_DEFVAL                                           0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_18_SHIFT                                            18
+#define DDR_PHY_DSGCR_RESERVED_18_MASK                                             0x00040000U
+
+/*ATO Analog Test Enable*/
+#undef DDR_PHY_DSGCR_ATOAE_DEFVAL 
+#undef DDR_PHY_DSGCR_ATOAE_SHIFT 
+#undef DDR_PHY_DSGCR_ATOAE_MASK 
+#define DDR_PHY_DSGCR_ATOAE_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_ATOAE_SHIFT                                                  17
+#define DDR_PHY_DSGCR_ATOAE_MASK                                                   0x00020000U
+
+/*DTO Output Enable*/
+#undef DDR_PHY_DSGCR_DTOOE_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOOE_SHIFT 
+#undef DDR_PHY_DSGCR_DTOOE_MASK 
+#define DDR_PHY_DSGCR_DTOOE_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_DTOOE_SHIFT                                                  16
+#define DDR_PHY_DSGCR_DTOOE_MASK                                                   0x00010000U
+
+/*DTO I/O Mode*/
+#undef DDR_PHY_DSGCR_DTOIOM_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOIOM_SHIFT 
+#undef DDR_PHY_DSGCR_DTOIOM_MASK 
+#define DDR_PHY_DSGCR_DTOIOM_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_DTOIOM_SHIFT                                                 15
+#define DDR_PHY_DSGCR_DTOIOM_MASK                                                  0x00008000U
+
+/*DTO Power Down Receiver*/
+#undef DDR_PHY_DSGCR_DTOPDR_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOPDR_SHIFT 
+#undef DDR_PHY_DSGCR_DTOPDR_MASK 
+#define DDR_PHY_DSGCR_DTOPDR_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_DTOPDR_SHIFT                                                 14
+#define DDR_PHY_DSGCR_DTOPDR_MASK                                                  0x00004000U
+
+/*Reserved. Return zeroes on reads*/
+#undef DDR_PHY_DSGCR_RESERVED_13_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_13_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_13_MASK 
+#define DDR_PHY_DSGCR_RESERVED_13_DEFVAL                                           0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_13_SHIFT                                            13
+#define DDR_PHY_DSGCR_RESERVED_13_MASK                                             0x00002000U
+
+/*DTO On-Die Termination*/
+#undef DDR_PHY_DSGCR_DTOODT_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOODT_SHIFT 
+#undef DDR_PHY_DSGCR_DTOODT_MASK 
+#define DDR_PHY_DSGCR_DTOODT_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_DTOODT_SHIFT                                                 12
+#define DDR_PHY_DSGCR_DTOODT_MASK                                                  0x00001000U
+
+/*PHY Update Acknowledge Delay*/
+#undef DDR_PHY_DSGCR_PUAD_DEFVAL 
+#undef DDR_PHY_DSGCR_PUAD_SHIFT 
+#undef DDR_PHY_DSGCR_PUAD_MASK 
+#define DDR_PHY_DSGCR_PUAD_DEFVAL                                                  0x02A04101
+#define DDR_PHY_DSGCR_PUAD_SHIFT                                                   6
+#define DDR_PHY_DSGCR_PUAD_MASK                                                    0x00000FC0U
+
+/*Controller Update Acknowledge Enable*/
+#undef DDR_PHY_DSGCR_CUAEN_DEFVAL 
+#undef DDR_PHY_DSGCR_CUAEN_SHIFT 
+#undef DDR_PHY_DSGCR_CUAEN_MASK 
+#define DDR_PHY_DSGCR_CUAEN_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_CUAEN_SHIFT                                                  5
+#define DDR_PHY_DSGCR_CUAEN_MASK                                                   0x00000020U
+
+/*Reserved. Return zeroes on reads*/
+#undef DDR_PHY_DSGCR_RESERVED_4_3_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_4_3_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_4_3_MASK 
+#define DDR_PHY_DSGCR_RESERVED_4_3_DEFVAL                                          0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_4_3_SHIFT                                           3
+#define DDR_PHY_DSGCR_RESERVED_4_3_MASK                                            0x00000018U
+
+/*Controller Impedance Update Enable*/
+#undef DDR_PHY_DSGCR_CTLZUEN_DEFVAL 
+#undef DDR_PHY_DSGCR_CTLZUEN_SHIFT 
+#undef DDR_PHY_DSGCR_CTLZUEN_MASK 
+#define DDR_PHY_DSGCR_CTLZUEN_DEFVAL                                               0x02A04101
+#define DDR_PHY_DSGCR_CTLZUEN_SHIFT                                                2
+#define DDR_PHY_DSGCR_CTLZUEN_MASK                                                 0x00000004U
+
+/*Reserved. Return zeroes on reads*/
+#undef DDR_PHY_DSGCR_RESERVED_1_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_1_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_1_MASK 
+#define DDR_PHY_DSGCR_RESERVED_1_DEFVAL                                            0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_1_SHIFT                                             1
+#define DDR_PHY_DSGCR_RESERVED_1_MASK                                              0x00000002U
+
+/*PHY Update Request Enable*/
+#undef DDR_PHY_DSGCR_PUREN_DEFVAL 
+#undef DDR_PHY_DSGCR_PUREN_SHIFT 
+#undef DDR_PHY_DSGCR_PUREN_MASK 
+#define DDR_PHY_DSGCR_PUREN_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_PUREN_SHIFT                                                  0
+#define DDR_PHY_DSGCR_PUREN_MASK                                                   0x00000001U
+
+/*DDR4 Gear Down Timing.*/
+#undef DDR_PHY_DCR_GEARDN_DEFVAL 
+#undef DDR_PHY_DCR_GEARDN_SHIFT 
+#undef DDR_PHY_DCR_GEARDN_MASK 
+#define DDR_PHY_DCR_GEARDN_DEFVAL                                                  0x0000040D
+#define DDR_PHY_DCR_GEARDN_SHIFT                                                   31
+#define DDR_PHY_DCR_GEARDN_MASK                                                    0x80000000U
+
+/*Un-used Bank Group*/
+#undef DDR_PHY_DCR_UBG_DEFVAL 
+#undef DDR_PHY_DCR_UBG_SHIFT 
+#undef DDR_PHY_DCR_UBG_MASK 
+#define DDR_PHY_DCR_UBG_DEFVAL                                                     0x0000040D
+#define DDR_PHY_DCR_UBG_SHIFT                                                      30
+#define DDR_PHY_DCR_UBG_MASK                                                       0x40000000U
+
+/*Un-buffered DIMM Address Mirroring*/
+#undef DDR_PHY_DCR_UDIMM_DEFVAL 
+#undef DDR_PHY_DCR_UDIMM_SHIFT 
+#undef DDR_PHY_DCR_UDIMM_MASK 
+#define DDR_PHY_DCR_UDIMM_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_UDIMM_SHIFT                                                    29
+#define DDR_PHY_DCR_UDIMM_MASK                                                     0x20000000U
+
+/*DDR 2T Timing*/
+#undef DDR_PHY_DCR_DDR2T_DEFVAL 
+#undef DDR_PHY_DCR_DDR2T_SHIFT 
+#undef DDR_PHY_DCR_DDR2T_MASK 
+#define DDR_PHY_DCR_DDR2T_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_DDR2T_SHIFT                                                    28
+#define DDR_PHY_DCR_DDR2T_MASK                                                     0x10000000U
+
+/*No Simultaneous Rank Access*/
+#undef DDR_PHY_DCR_NOSRA_DEFVAL 
+#undef DDR_PHY_DCR_NOSRA_SHIFT 
+#undef DDR_PHY_DCR_NOSRA_MASK 
+#define DDR_PHY_DCR_NOSRA_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_NOSRA_SHIFT                                                    27
+#define DDR_PHY_DCR_NOSRA_MASK                                                     0x08000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DCR_RESERVED_26_18_DEFVAL 
+#undef DDR_PHY_DCR_RESERVED_26_18_SHIFT 
+#undef DDR_PHY_DCR_RESERVED_26_18_MASK 
+#define DDR_PHY_DCR_RESERVED_26_18_DEFVAL                                          0x0000040D
+#define DDR_PHY_DCR_RESERVED_26_18_SHIFT                                           18
+#define DDR_PHY_DCR_RESERVED_26_18_MASK                                            0x07FC0000U
+
+/*Byte Mask*/
+#undef DDR_PHY_DCR_BYTEMASK_DEFVAL 
+#undef DDR_PHY_DCR_BYTEMASK_SHIFT 
+#undef DDR_PHY_DCR_BYTEMASK_MASK 
+#define DDR_PHY_DCR_BYTEMASK_DEFVAL                                                0x0000040D
+#define DDR_PHY_DCR_BYTEMASK_SHIFT                                                 10
+#define DDR_PHY_DCR_BYTEMASK_MASK                                                  0x0003FC00U
+
+/*DDR Type*/
+#undef DDR_PHY_DCR_DDRTYPE_DEFVAL 
+#undef DDR_PHY_DCR_DDRTYPE_SHIFT 
+#undef DDR_PHY_DCR_DDRTYPE_MASK 
+#define DDR_PHY_DCR_DDRTYPE_DEFVAL                                                 0x0000040D
+#define DDR_PHY_DCR_DDRTYPE_SHIFT                                                  8
+#define DDR_PHY_DCR_DDRTYPE_MASK                                                   0x00000300U
+
+/*Multi-Purpose Register (MPR) DQ (DDR3 Only)*/
+#undef DDR_PHY_DCR_MPRDQ_DEFVAL 
+#undef DDR_PHY_DCR_MPRDQ_SHIFT 
+#undef DDR_PHY_DCR_MPRDQ_MASK 
+#define DDR_PHY_DCR_MPRDQ_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_MPRDQ_SHIFT                                                    7
+#define DDR_PHY_DCR_MPRDQ_MASK                                                     0x00000080U
+
+/*Primary DQ (DDR3 Only)*/
+#undef DDR_PHY_DCR_PDQ_DEFVAL 
+#undef DDR_PHY_DCR_PDQ_SHIFT 
+#undef DDR_PHY_DCR_PDQ_MASK 
+#define DDR_PHY_DCR_PDQ_DEFVAL                                                     0x0000040D
+#define DDR_PHY_DCR_PDQ_SHIFT                                                      4
+#define DDR_PHY_DCR_PDQ_MASK                                                       0x00000070U
+
+/*DDR 8-Bank*/
+#undef DDR_PHY_DCR_DDR8BNK_DEFVAL 
+#undef DDR_PHY_DCR_DDR8BNK_SHIFT 
+#undef DDR_PHY_DCR_DDR8BNK_MASK 
+#define DDR_PHY_DCR_DDR8BNK_DEFVAL                                                 0x0000040D
+#define DDR_PHY_DCR_DDR8BNK_SHIFT                                                  3
+#define DDR_PHY_DCR_DDR8BNK_MASK                                                   0x00000008U
+
+/*DDR Mode*/
+#undef DDR_PHY_DCR_DDRMD_DEFVAL 
+#undef DDR_PHY_DCR_DDRMD_SHIFT 
+#undef DDR_PHY_DCR_DDRMD_MASK 
+#define DDR_PHY_DCR_DDRMD_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_DDRMD_SHIFT                                                    0
+#define DDR_PHY_DCR_DDRMD_MASK                                                     0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_31_29_MASK 
+#define DDR_PHY_DTPR0_RESERVED_31_29_DEFVAL                                        0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_31_29_SHIFT                                         29
+#define DDR_PHY_DTPR0_RESERVED_31_29_MASK                                          0xE0000000U
+
+/*Activate to activate command delay (different banks)*/
+#undef DDR_PHY_DTPR0_TRRD_DEFVAL 
+#undef DDR_PHY_DTPR0_TRRD_SHIFT 
+#undef DDR_PHY_DTPR0_TRRD_MASK 
+#define DDR_PHY_DTPR0_TRRD_DEFVAL                                                  0x105A2D08
+#define DDR_PHY_DTPR0_TRRD_SHIFT                                                   24
+#define DDR_PHY_DTPR0_TRRD_MASK                                                    0x1F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_23_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_23_MASK 
+#define DDR_PHY_DTPR0_RESERVED_23_DEFVAL                                           0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_23_SHIFT                                            23
+#define DDR_PHY_DTPR0_RESERVED_23_MASK                                             0x00800000U
+
+/*Activate to precharge command delay*/
+#undef DDR_PHY_DTPR0_TRAS_DEFVAL 
+#undef DDR_PHY_DTPR0_TRAS_SHIFT 
+#undef DDR_PHY_DTPR0_TRAS_MASK 
+#define DDR_PHY_DTPR0_TRAS_DEFVAL                                                  0x105A2D08
+#define DDR_PHY_DTPR0_TRAS_SHIFT                                                   16
+#define DDR_PHY_DTPR0_TRAS_MASK                                                    0x007F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_15_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_15_MASK 
+#define DDR_PHY_DTPR0_RESERVED_15_DEFVAL                                           0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_15_SHIFT                                            15
+#define DDR_PHY_DTPR0_RESERVED_15_MASK                                             0x00008000U
+
+/*Precharge command period*/
+#undef DDR_PHY_DTPR0_TRP_DEFVAL 
+#undef DDR_PHY_DTPR0_TRP_SHIFT 
+#undef DDR_PHY_DTPR0_TRP_MASK 
+#define DDR_PHY_DTPR0_TRP_DEFVAL                                                   0x105A2D08
+#define DDR_PHY_DTPR0_TRP_SHIFT                                                    8
+#define DDR_PHY_DTPR0_TRP_MASK                                                     0x00007F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR0_RESERVED_7_5_DEFVAL                                          0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR0_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Internal read to precharge command delay*/
+#undef DDR_PHY_DTPR0_TRTP_DEFVAL 
+#undef DDR_PHY_DTPR0_TRTP_SHIFT 
+#undef DDR_PHY_DTPR0_TRTP_MASK 
+#define DDR_PHY_DTPR0_TRTP_DEFVAL                                                  0x105A2D08
+#define DDR_PHY_DTPR0_TRTP_SHIFT                                                   0
+#define DDR_PHY_DTPR0_TRTP_MASK                                                    0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_31_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_31_MASK 
+#define DDR_PHY_DTPR1_RESERVED_31_DEFVAL                                           0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_31_SHIFT                                            31
+#define DDR_PHY_DTPR1_RESERVED_31_MASK                                             0x80000000U
+
+/*Minimum delay from when write leveling mode is programmed to the first DQS/DQS# rising edge.*/
+#undef DDR_PHY_DTPR1_TWLMRD_DEFVAL 
+#undef DDR_PHY_DTPR1_TWLMRD_SHIFT 
+#undef DDR_PHY_DTPR1_TWLMRD_MASK 
+#define DDR_PHY_DTPR1_TWLMRD_DEFVAL                                                0x5656041E
+#define DDR_PHY_DTPR1_TWLMRD_SHIFT                                                 24
+#define DDR_PHY_DTPR1_TWLMRD_MASK                                                  0x7F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_23_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_23_MASK 
+#define DDR_PHY_DTPR1_RESERVED_23_DEFVAL                                           0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_23_SHIFT                                            23
+#define DDR_PHY_DTPR1_RESERVED_23_MASK                                             0x00800000U
+
+/*4-bank activate period*/
+#undef DDR_PHY_DTPR1_TFAW_DEFVAL 
+#undef DDR_PHY_DTPR1_TFAW_SHIFT 
+#undef DDR_PHY_DTPR1_TFAW_MASK 
+#define DDR_PHY_DTPR1_TFAW_DEFVAL                                                  0x5656041E
+#define DDR_PHY_DTPR1_TFAW_SHIFT                                                   16
+#define DDR_PHY_DTPR1_TFAW_MASK                                                    0x007F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_15_11_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_15_11_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_15_11_MASK 
+#define DDR_PHY_DTPR1_RESERVED_15_11_DEFVAL                                        0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_15_11_SHIFT                                         11
+#define DDR_PHY_DTPR1_RESERVED_15_11_MASK                                          0x0000F800U
+
+/*Load mode update delay (DDR4 and DDR3 only)*/
+#undef DDR_PHY_DTPR1_TMOD_DEFVAL 
+#undef DDR_PHY_DTPR1_TMOD_SHIFT 
+#undef DDR_PHY_DTPR1_TMOD_MASK 
+#define DDR_PHY_DTPR1_TMOD_DEFVAL                                                  0x5656041E
+#define DDR_PHY_DTPR1_TMOD_SHIFT                                                   8
+#define DDR_PHY_DTPR1_TMOD_MASK                                                    0x00000700U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR1_RESERVED_7_5_DEFVAL                                          0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR1_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Load mode cycle time*/
+#undef DDR_PHY_DTPR1_TMRD_DEFVAL 
+#undef DDR_PHY_DTPR1_TMRD_SHIFT 
+#undef DDR_PHY_DTPR1_TMRD_MASK 
+#define DDR_PHY_DTPR1_TMRD_DEFVAL                                                  0x5656041E
+#define DDR_PHY_DTPR1_TMRD_SHIFT                                                   0
+#define DDR_PHY_DTPR1_TMRD_MASK                                                    0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_31_29_MASK 
+#define DDR_PHY_DTPR2_RESERVED_31_29_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_31_29_SHIFT                                         29
+#define DDR_PHY_DTPR2_RESERVED_31_29_MASK                                          0xE0000000U
+
+/*Read to Write command delay. Valid values are*/
+#undef DDR_PHY_DTPR2_TRTW_DEFVAL 
+#undef DDR_PHY_DTPR2_TRTW_SHIFT 
+#undef DDR_PHY_DTPR2_TRTW_MASK 
+#define DDR_PHY_DTPR2_TRTW_DEFVAL                                                  0x000B01D0
+#define DDR_PHY_DTPR2_TRTW_SHIFT                                                   28
+#define DDR_PHY_DTPR2_TRTW_MASK                                                    0x10000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_27_25_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_27_25_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_27_25_MASK 
+#define DDR_PHY_DTPR2_RESERVED_27_25_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_27_25_SHIFT                                         25
+#define DDR_PHY_DTPR2_RESERVED_27_25_MASK                                          0x0E000000U
+
+/*Read to ODT delay (DDR3 only)*/
+#undef DDR_PHY_DTPR2_TRTODT_DEFVAL 
+#undef DDR_PHY_DTPR2_TRTODT_SHIFT 
+#undef DDR_PHY_DTPR2_TRTODT_MASK 
+#define DDR_PHY_DTPR2_TRTODT_DEFVAL                                                0x000B01D0
+#define DDR_PHY_DTPR2_TRTODT_SHIFT                                                 24
+#define DDR_PHY_DTPR2_TRTODT_MASK                                                  0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_23_20_MASK 
+#define DDR_PHY_DTPR2_RESERVED_23_20_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_23_20_SHIFT                                         20
+#define DDR_PHY_DTPR2_RESERVED_23_20_MASK                                          0x00F00000U
+
+/*CKE minimum pulse width*/
+#undef DDR_PHY_DTPR2_TCKE_DEFVAL 
+#undef DDR_PHY_DTPR2_TCKE_SHIFT 
+#undef DDR_PHY_DTPR2_TCKE_MASK 
+#define DDR_PHY_DTPR2_TCKE_DEFVAL                                                  0x000B01D0
+#define DDR_PHY_DTPR2_TCKE_SHIFT                                                   16
+#define DDR_PHY_DTPR2_TCKE_MASK                                                    0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_15_10_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_15_10_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_15_10_MASK 
+#define DDR_PHY_DTPR2_RESERVED_15_10_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_15_10_SHIFT                                         10
+#define DDR_PHY_DTPR2_RESERVED_15_10_MASK                                          0x0000FC00U
+
+/*Self refresh exit delay*/
+#undef DDR_PHY_DTPR2_TXS_DEFVAL 
+#undef DDR_PHY_DTPR2_TXS_SHIFT 
+#undef DDR_PHY_DTPR2_TXS_MASK 
+#define DDR_PHY_DTPR2_TXS_DEFVAL                                                   0x000B01D0
+#define DDR_PHY_DTPR2_TXS_SHIFT                                                    0
+#define DDR_PHY_DTPR2_TXS_MASK                                                     0x000003FFU
+
+/*ODT turn-off delay extension*/
+#undef DDR_PHY_DTPR3_TOFDX_DEFVAL 
+#undef DDR_PHY_DTPR3_TOFDX_SHIFT 
+#undef DDR_PHY_DTPR3_TOFDX_MASK 
+#define DDR_PHY_DTPR3_TOFDX_DEFVAL                                                 0x02000804
+#define DDR_PHY_DTPR3_TOFDX_SHIFT                                                  29
+#define DDR_PHY_DTPR3_TOFDX_MASK                                                   0xE0000000U
+
+/*Read to read and write to write command delay*/
+#undef DDR_PHY_DTPR3_TCCD_DEFVAL 
+#undef DDR_PHY_DTPR3_TCCD_SHIFT 
+#undef DDR_PHY_DTPR3_TCCD_MASK 
+#define DDR_PHY_DTPR3_TCCD_DEFVAL                                                  0x02000804
+#define DDR_PHY_DTPR3_TCCD_SHIFT                                                   26
+#define DDR_PHY_DTPR3_TCCD_MASK                                                    0x1C000000U
+
+/*DLL locking time*/
+#undef DDR_PHY_DTPR3_TDLLK_DEFVAL 
+#undef DDR_PHY_DTPR3_TDLLK_SHIFT 
+#undef DDR_PHY_DTPR3_TDLLK_MASK 
+#define DDR_PHY_DTPR3_TDLLK_DEFVAL                                                 0x02000804
+#define DDR_PHY_DTPR3_TDLLK_SHIFT                                                  16
+#define DDR_PHY_DTPR3_TDLLK_MASK                                                   0x03FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR3_RESERVED_15_12_DEFVAL 
+#undef DDR_PHY_DTPR3_RESERVED_15_12_SHIFT 
+#undef DDR_PHY_DTPR3_RESERVED_15_12_MASK 
+#define DDR_PHY_DTPR3_RESERVED_15_12_DEFVAL                                        0x02000804
+#define DDR_PHY_DTPR3_RESERVED_15_12_SHIFT                                         12
+#define DDR_PHY_DTPR3_RESERVED_15_12_MASK                                          0x0000F000U
+
+/*Maximum DQS output access time from CK/CK# (LPDDR2/3 only)*/
+#undef DDR_PHY_DTPR3_TDQSCKMAX_DEFVAL 
+#undef DDR_PHY_DTPR3_TDQSCKMAX_SHIFT 
+#undef DDR_PHY_DTPR3_TDQSCKMAX_MASK 
+#define DDR_PHY_DTPR3_TDQSCKMAX_DEFVAL                                             0x02000804
+#define DDR_PHY_DTPR3_TDQSCKMAX_SHIFT                                              8
+#define DDR_PHY_DTPR3_TDQSCKMAX_MASK                                               0x00000F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR3_RESERVED_7_3_DEFVAL 
+#undef DDR_PHY_DTPR3_RESERVED_7_3_SHIFT 
+#undef DDR_PHY_DTPR3_RESERVED_7_3_MASK 
+#define DDR_PHY_DTPR3_RESERVED_7_3_DEFVAL                                          0x02000804
+#define DDR_PHY_DTPR3_RESERVED_7_3_SHIFT                                           3
+#define DDR_PHY_DTPR3_RESERVED_7_3_MASK                                            0x000000F8U
+
+/*DQS output access time from CK/CK# (LPDDR2/3 only)*/
+#undef DDR_PHY_DTPR3_TDQSCK_DEFVAL 
+#undef DDR_PHY_DTPR3_TDQSCK_SHIFT 
+#undef DDR_PHY_DTPR3_TDQSCK_MASK 
+#define DDR_PHY_DTPR3_TDQSCK_DEFVAL                                                0x02000804
+#define DDR_PHY_DTPR3_TDQSCK_SHIFT                                                 0
+#define DDR_PHY_DTPR3_TDQSCK_MASK                                                  0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_31_30_MASK 
+#define DDR_PHY_DTPR4_RESERVED_31_30_DEFVAL                                        0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_31_30_SHIFT                                         30
+#define DDR_PHY_DTPR4_RESERVED_31_30_MASK                                          0xC0000000U
+
+/*ODT turn-on/turn-off delays (DDR2 only)*/
+#undef DDR_PHY_DTPR4_TAOND_TAOFD_DEFVAL 
+#undef DDR_PHY_DTPR4_TAOND_TAOFD_SHIFT 
+#undef DDR_PHY_DTPR4_TAOND_TAOFD_MASK 
+#define DDR_PHY_DTPR4_TAOND_TAOFD_DEFVAL                                           0x01C02B10
+#define DDR_PHY_DTPR4_TAOND_TAOFD_SHIFT                                            28
+#define DDR_PHY_DTPR4_TAOND_TAOFD_MASK                                             0x30000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_27_26_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_27_26_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_27_26_MASK 
+#define DDR_PHY_DTPR4_RESERVED_27_26_DEFVAL                                        0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_27_26_SHIFT                                         26
+#define DDR_PHY_DTPR4_RESERVED_27_26_MASK                                          0x0C000000U
+
+/*Refresh-to-Refresh*/
+#undef DDR_PHY_DTPR4_TRFC_DEFVAL 
+#undef DDR_PHY_DTPR4_TRFC_SHIFT 
+#undef DDR_PHY_DTPR4_TRFC_MASK 
+#define DDR_PHY_DTPR4_TRFC_DEFVAL                                                  0x01C02B10
+#define DDR_PHY_DTPR4_TRFC_SHIFT                                                   16
+#define DDR_PHY_DTPR4_TRFC_MASK                                                    0x03FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_15_14_MASK 
+#define DDR_PHY_DTPR4_RESERVED_15_14_DEFVAL                                        0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_15_14_SHIFT                                         14
+#define DDR_PHY_DTPR4_RESERVED_15_14_MASK                                          0x0000C000U
+
+/*Write leveling output delay*/
+#undef DDR_PHY_DTPR4_TWLO_DEFVAL 
+#undef DDR_PHY_DTPR4_TWLO_SHIFT 
+#undef DDR_PHY_DTPR4_TWLO_MASK 
+#define DDR_PHY_DTPR4_TWLO_DEFVAL                                                  0x01C02B10
+#define DDR_PHY_DTPR4_TWLO_SHIFT                                                   8
+#define DDR_PHY_DTPR4_TWLO_MASK                                                    0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR4_RESERVED_7_5_DEFVAL                                          0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR4_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Power down exit delay*/
+#undef DDR_PHY_DTPR4_TXP_DEFVAL 
+#undef DDR_PHY_DTPR4_TXP_SHIFT 
+#undef DDR_PHY_DTPR4_TXP_MASK 
+#define DDR_PHY_DTPR4_TXP_DEFVAL                                                   0x01C02B10
+#define DDR_PHY_DTPR4_TXP_SHIFT                                                    0
+#define DDR_PHY_DTPR4_TXP_MASK                                                     0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR5_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DTPR5_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DTPR5_RESERVED_31_24_MASK 
+#define DDR_PHY_DTPR5_RESERVED_31_24_DEFVAL                                        0x00872716
+#define DDR_PHY_DTPR5_RESERVED_31_24_SHIFT                                         24
+#define DDR_PHY_DTPR5_RESERVED_31_24_MASK                                          0xFF000000U
+
+/*Activate to activate command delay (same bank)*/
+#undef DDR_PHY_DTPR5_TRC_DEFVAL 
+#undef DDR_PHY_DTPR5_TRC_SHIFT 
+#undef DDR_PHY_DTPR5_TRC_MASK 
+#define DDR_PHY_DTPR5_TRC_DEFVAL                                                   0x00872716
+#define DDR_PHY_DTPR5_TRC_SHIFT                                                    16
+#define DDR_PHY_DTPR5_TRC_MASK                                                     0x00FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DTPR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DTPR5_RESERVED_15_MASK 
+#define DDR_PHY_DTPR5_RESERVED_15_DEFVAL                                           0x00872716
+#define DDR_PHY_DTPR5_RESERVED_15_SHIFT                                            15
+#define DDR_PHY_DTPR5_RESERVED_15_MASK                                             0x00008000U
+
+/*Activate to read or write delay*/
+#undef DDR_PHY_DTPR5_TRCD_DEFVAL 
+#undef DDR_PHY_DTPR5_TRCD_SHIFT 
+#undef DDR_PHY_DTPR5_TRCD_MASK 
+#define DDR_PHY_DTPR5_TRCD_DEFVAL                                                  0x00872716
+#define DDR_PHY_DTPR5_TRCD_SHIFT                                                   8
+#define DDR_PHY_DTPR5_TRCD_MASK                                                    0x00007F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR5_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR5_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR5_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR5_RESERVED_7_5_DEFVAL                                          0x00872716
+#define DDR_PHY_DTPR5_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR5_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Internal write to read command delay*/
+#undef DDR_PHY_DTPR5_TWTR_DEFVAL 
+#undef DDR_PHY_DTPR5_TWTR_SHIFT 
+#undef DDR_PHY_DTPR5_TWTR_MASK 
+#define DDR_PHY_DTPR5_TWTR_DEFVAL                                                  0x00872716
+#define DDR_PHY_DTPR5_TWTR_SHIFT                                                   0
+#define DDR_PHY_DTPR5_TWTR_MASK                                                    0x0000001FU
+
+/*PUB Write Latency Enable*/
+#undef DDR_PHY_DTPR6_PUBWLEN_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBWLEN_SHIFT 
+#undef DDR_PHY_DTPR6_PUBWLEN_MASK 
+#define DDR_PHY_DTPR6_PUBWLEN_DEFVAL                                               0x00000505
+#define DDR_PHY_DTPR6_PUBWLEN_SHIFT                                                31
+#define DDR_PHY_DTPR6_PUBWLEN_MASK                                                 0x80000000U
+
+/*PUB Read Latency Enable*/
+#undef DDR_PHY_DTPR6_PUBRLEN_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBRLEN_SHIFT 
+#undef DDR_PHY_DTPR6_PUBRLEN_MASK 
+#define DDR_PHY_DTPR6_PUBRLEN_DEFVAL                                               0x00000505
+#define DDR_PHY_DTPR6_PUBRLEN_SHIFT                                                30
+#define DDR_PHY_DTPR6_PUBRLEN_MASK                                                 0x40000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR6_RESERVED_29_14_DEFVAL 
+#undef DDR_PHY_DTPR6_RESERVED_29_14_SHIFT 
+#undef DDR_PHY_DTPR6_RESERVED_29_14_MASK 
+#define DDR_PHY_DTPR6_RESERVED_29_14_DEFVAL                                        0x00000505
+#define DDR_PHY_DTPR6_RESERVED_29_14_SHIFT                                         14
+#define DDR_PHY_DTPR6_RESERVED_29_14_MASK                                          0x3FFFC000U
+
+/*Write Latency*/
+#undef DDR_PHY_DTPR6_PUBWL_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBWL_SHIFT 
+#undef DDR_PHY_DTPR6_PUBWL_MASK 
+#define DDR_PHY_DTPR6_PUBWL_DEFVAL                                                 0x00000505
+#define DDR_PHY_DTPR6_PUBWL_SHIFT                                                  8
+#define DDR_PHY_DTPR6_PUBWL_MASK                                                   0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DTPR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DTPR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DTPR6_RESERVED_7_6_DEFVAL                                          0x00000505
+#define DDR_PHY_DTPR6_RESERVED_7_6_SHIFT                                           6
+#define DDR_PHY_DTPR6_RESERVED_7_6_MASK                                            0x000000C0U
+
+/*Read Latency*/
+#undef DDR_PHY_DTPR6_PUBRL_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBRL_SHIFT 
+#undef DDR_PHY_DTPR6_PUBRL_MASK 
+#define DDR_PHY_DTPR6_PUBRL_DEFVAL                                                 0x00000505
+#define DDR_PHY_DTPR6_PUBRL_SHIFT                                                  0
+#define DDR_PHY_DTPR6_PUBRL_MASK                                                   0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_31_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_31_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_31_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_31_DEFVAL                                       0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_31_SHIFT                                        31
+#define DDR_PHY_RDIMMGCR0_RESERVED_31_MASK                                         0x80000000U
+
+/*RDMIMM Quad CS Enable*/
+#undef DDR_PHY_RDIMMGCR0_QCSEN_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_QCSEN_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_QCSEN_MASK 
+#define DDR_PHY_RDIMMGCR0_QCSEN_DEFVAL                                             0x08400020
+#define DDR_PHY_RDIMMGCR0_QCSEN_SHIFT                                              30
+#define DDR_PHY_RDIMMGCR0_QCSEN_MASK                                               0x40000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_29_28_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_29_28_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_29_28_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_29_28_DEFVAL                                    0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_29_28_SHIFT                                     28
+#define DDR_PHY_RDIMMGCR0_RESERVED_29_28_MASK                                      0x30000000U
+
+/*RDIMM Outputs I/O Mode*/
+#undef DDR_PHY_RDIMMGCR0_RDIMMIOM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RDIMMIOM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RDIMMIOM_MASK 
+#define DDR_PHY_RDIMMGCR0_RDIMMIOM_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_RDIMMIOM_SHIFT                                           27
+#define DDR_PHY_RDIMMGCR0_RDIMMIOM_MASK                                            0x08000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_26_24_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_26_24_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_26_24_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_26_24_DEFVAL                                    0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_26_24_SHIFT                                     24
+#define DDR_PHY_RDIMMGCR0_RESERVED_26_24_MASK                                      0x07000000U
+
+/*ERROUT# Output Enable*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTOE_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTOE_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTOE_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTOE_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTOE_SHIFT                                           23
+#define DDR_PHY_RDIMMGCR0_ERROUTOE_MASK                                            0x00800000U
+
+/*ERROUT# I/O Mode*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTIOM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTIOM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTIOM_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTIOM_DEFVAL                                         0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTIOM_SHIFT                                          22
+#define DDR_PHY_RDIMMGCR0_ERROUTIOM_MASK                                           0x00400000U
+
+/*ERROUT# Power Down Receiver*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTPDR_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTPDR_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTPDR_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTPDR_DEFVAL                                         0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTPDR_SHIFT                                          21
+#define DDR_PHY_RDIMMGCR0_ERROUTPDR_MASK                                           0x00200000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_20_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_20_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_20_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_20_DEFVAL                                       0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_20_SHIFT                                        20
+#define DDR_PHY_RDIMMGCR0_RESERVED_20_MASK                                         0x00100000U
+
+/*ERROUT# On-Die Termination*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTODT_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTODT_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTODT_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTODT_DEFVAL                                         0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTODT_SHIFT                                          19
+#define DDR_PHY_RDIMMGCR0_ERROUTODT_MASK                                           0x00080000U
+
+/*Load Reduced DIMM*/
+#undef DDR_PHY_RDIMMGCR0_LRDIMM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_LRDIMM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_LRDIMM_MASK 
+#define DDR_PHY_RDIMMGCR0_LRDIMM_DEFVAL                                            0x08400020
+#define DDR_PHY_RDIMMGCR0_LRDIMM_SHIFT                                             18
+#define DDR_PHY_RDIMMGCR0_LRDIMM_MASK                                              0x00040000U
+
+/*PAR_IN I/O Mode*/
+#undef DDR_PHY_RDIMMGCR0_PARINIOM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_PARINIOM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_PARINIOM_MASK 
+#define DDR_PHY_RDIMMGCR0_PARINIOM_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_PARINIOM_SHIFT                                           17
+#define DDR_PHY_RDIMMGCR0_PARINIOM_MASK                                            0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_16_8_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_16_8_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_16_8_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_16_8_DEFVAL                                     0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_16_8_SHIFT                                      8
+#define DDR_PHY_RDIMMGCR0_RESERVED_16_8_MASK                                       0x0001FF00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_MASK 
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_DEFVAL                                     0x08400020
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_SHIFT                                      6
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_MASK                                       0x000000C0U
+
+/*Rank Mirror Enable.*/
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_MASK 
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_SHIFT                                           4
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_MASK                                            0x00000030U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_3_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_3_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_3_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_3_DEFVAL                                        0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_3_SHIFT                                         3
+#define DDR_PHY_RDIMMGCR0_RESERVED_3_MASK                                          0x00000008U
+
+/*Stop on Parity Error*/
+#undef DDR_PHY_RDIMMGCR0_SOPERR_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_SOPERR_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_SOPERR_MASK 
+#define DDR_PHY_RDIMMGCR0_SOPERR_DEFVAL                                            0x08400020
+#define DDR_PHY_RDIMMGCR0_SOPERR_SHIFT                                             2
+#define DDR_PHY_RDIMMGCR0_SOPERR_MASK                                              0x00000004U
+
+/*Parity Error No Registering*/
+#undef DDR_PHY_RDIMMGCR0_ERRNOREG_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERRNOREG_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERRNOREG_MASK 
+#define DDR_PHY_RDIMMGCR0_ERRNOREG_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_ERRNOREG_SHIFT                                           1
+#define DDR_PHY_RDIMMGCR0_ERRNOREG_MASK                                            0x00000002U
+
+/*Registered DIMM*/
+#undef DDR_PHY_RDIMMGCR0_RDIMM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RDIMM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RDIMM_MASK 
+#define DDR_PHY_RDIMMGCR0_RDIMM_DEFVAL                                             0x08400020
+#define DDR_PHY_RDIMMGCR0_RDIMM_SHIFT                                              0
+#define DDR_PHY_RDIMMGCR0_RDIMM_MASK                                               0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_31_29_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_31_29_DEFVAL                                    0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_31_29_SHIFT                                     29
+#define DDR_PHY_RDIMMGCR1_RESERVED_31_29_MASK                                      0xE0000000U
+
+/*Address [17] B-side Inversion Disable*/
+#undef DDR_PHY_RDIMMGCR1_A17BID_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_A17BID_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_A17BID_MASK 
+#define DDR_PHY_RDIMMGCR1_A17BID_DEFVAL                                            0x00000C80
+#define DDR_PHY_RDIMMGCR1_A17BID_SHIFT                                             28
+#define DDR_PHY_RDIMMGCR1_A17BID_MASK                                              0x10000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_27_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_27_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_27_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_27_DEFVAL                                       0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_27_SHIFT                                        27
+#define DDR_PHY_RDIMMGCR1_RESERVED_27_MASK                                         0x08000000U
+
+/*Command word to command word programming delay*/
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L2_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L2_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L2_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L2_DEFVAL                                         0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L2_SHIFT                                          24
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L2_MASK                                           0x07000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_23_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_23_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_23_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_23_DEFVAL                                       0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_23_SHIFT                                        23
+#define DDR_PHY_RDIMMGCR1_RESERVED_23_MASK                                         0x00800000U
+
+/*Command word to command word programming delay*/
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L_DEFVAL                                          0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L_SHIFT                                           20
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L_MASK                                            0x00700000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_19_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_19_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_19_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_19_DEFVAL                                       0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_19_SHIFT                                        19
+#define DDR_PHY_RDIMMGCR1_RESERVED_19_MASK                                         0x00080000U
+
+/*Command word to command word programming delay*/
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCMRD_DEFVAL                                            0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCMRD_SHIFT                                             16
+#define DDR_PHY_RDIMMGCR1_TBCMRD_MASK                                              0x00070000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_15_14_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_15_14_DEFVAL                                    0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_15_14_SHIFT                                     14
+#define DDR_PHY_RDIMMGCR1_RESERVED_15_14_MASK                                      0x0000C000U
+
+/*Stabilization time*/
+#undef DDR_PHY_RDIMMGCR1_TBCSTAB_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCSTAB_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCSTAB_DEFVAL                                           0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT                                            0
+#define DDR_PHY_RDIMMGCR1_TBCSTAB_MASK                                             0x00003FFFU
+
+/*Control Word 15*/
+#undef DDR_PHY_RDIMMCR1_RC15_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC15_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC15_MASK 
+#define DDR_PHY_RDIMMCR1_RC15_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC15_SHIFT                                                28
+#define DDR_PHY_RDIMMCR1_RC15_MASK                                                 0xF0000000U
+
+/*DDR4 Control Word 14 (Parity Control Word) / DDR3 Reserved*/
+#undef DDR_PHY_RDIMMCR1_RC14_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC14_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC14_MASK 
+#define DDR_PHY_RDIMMCR1_RC14_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC14_SHIFT                                                24
+#define DDR_PHY_RDIMMCR1_RC14_MASK                                                 0x0F000000U
+
+/*DDR4 Control Word 13 (DIMM Configuration Control Word) / DDR3 Reserved*/
+#undef DDR_PHY_RDIMMCR1_RC13_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC13_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC13_MASK 
+#define DDR_PHY_RDIMMCR1_RC13_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC13_SHIFT                                                20
+#define DDR_PHY_RDIMMCR1_RC13_MASK                                                 0x00F00000U
+
+/*DDR4 Control Word 12 (Training Control Word) / DDR3 Reserved*/
+#undef DDR_PHY_RDIMMCR1_RC12_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC12_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC12_MASK 
+#define DDR_PHY_RDIMMCR1_RC12_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC12_SHIFT                                                16
+#define DDR_PHY_RDIMMCR1_RC12_MASK                                                 0x000F0000U
+
+/*DDR4 Control Word 11 (Operating Voltage VDD and VREFCA Source Control Word) / DDR3 Control Word 11 (Operation Voltage VDD Con
+		rol Word)*/
+#undef DDR_PHY_RDIMMCR1_RC11_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC11_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC11_MASK 
+#define DDR_PHY_RDIMMCR1_RC11_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC11_SHIFT                                                12
+#define DDR_PHY_RDIMMCR1_RC11_MASK                                                 0x0000F000U
+
+/*DDR4/DDR3 Control Word 10 (RDIMM Operating Speed Control Word)*/
+#undef DDR_PHY_RDIMMCR1_RC10_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC10_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC10_MASK 
+#define DDR_PHY_RDIMMCR1_RC10_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC10_SHIFT                                                8
+#define DDR_PHY_RDIMMCR1_RC10_MASK                                                 0x00000F00U
+
+/*DDR4/DDR3 Control Word 9 (Power Saving Settings Control Word)*/
+#undef DDR_PHY_RDIMMCR1_RC9_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC9_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC9_MASK 
+#define DDR_PHY_RDIMMCR1_RC9_DEFVAL                                                0x00000000
+#define DDR_PHY_RDIMMCR1_RC9_SHIFT                                                 4
+#define DDR_PHY_RDIMMCR1_RC9_MASK                                                  0x000000F0U
+
+/*DDR4 Control Word 8 (Input/Output Configuration Control Word) / DDR3 Control Word 8 (Additional Input Bus Termination Setting
+		Control Word)*/
+#undef DDR_PHY_RDIMMCR1_RC8_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC8_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC8_MASK 
+#define DDR_PHY_RDIMMCR1_RC8_DEFVAL                                                0x00000000
+#define DDR_PHY_RDIMMCR1_RC8_SHIFT                                                 0
+#define DDR_PHY_RDIMMCR1_RC8_MASK                                                  0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR0_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR0_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR0_RESERVED_31_8_MASK 
+#define DDR_PHY_MR0_RESERVED_31_8_DEFVAL                                           0x00000052
+#define DDR_PHY_MR0_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR0_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*CA Terminating Rank*/
+#undef DDR_PHY_MR0_CATR_DEFVAL 
+#undef DDR_PHY_MR0_CATR_SHIFT 
+#undef DDR_PHY_MR0_CATR_MASK 
+#define DDR_PHY_MR0_CATR_DEFVAL                                                    0x00000052
+#define DDR_PHY_MR0_CATR_SHIFT                                                     7
+#define DDR_PHY_MR0_CATR_MASK                                                      0x00000080U
+
+/*Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR0_RSVD_6_5_DEFVAL 
+#undef DDR_PHY_MR0_RSVD_6_5_SHIFT 
+#undef DDR_PHY_MR0_RSVD_6_5_MASK 
+#define DDR_PHY_MR0_RSVD_6_5_DEFVAL                                                0x00000052
+#define DDR_PHY_MR0_RSVD_6_5_SHIFT                                                 5
+#define DDR_PHY_MR0_RSVD_6_5_MASK                                                  0x00000060U
+
+/*Built-in Self-Test for RZQ*/
+#undef DDR_PHY_MR0_RZQI_DEFVAL 
+#undef DDR_PHY_MR0_RZQI_SHIFT 
+#undef DDR_PHY_MR0_RZQI_MASK 
+#define DDR_PHY_MR0_RZQI_DEFVAL                                                    0x00000052
+#define DDR_PHY_MR0_RZQI_SHIFT                                                     3
+#define DDR_PHY_MR0_RZQI_MASK                                                      0x00000018U
+
+/*Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR0_RSVD_2_0_DEFVAL 
+#undef DDR_PHY_MR0_RSVD_2_0_SHIFT 
+#undef DDR_PHY_MR0_RSVD_2_0_MASK 
+#define DDR_PHY_MR0_RSVD_2_0_DEFVAL                                                0x00000052
+#define DDR_PHY_MR0_RSVD_2_0_SHIFT                                                 0
+#define DDR_PHY_MR0_RSVD_2_0_MASK                                                  0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR1_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR1_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR1_RESERVED_31_8_MASK 
+#define DDR_PHY_MR1_RESERVED_31_8_DEFVAL                                           0x00000004
+#define DDR_PHY_MR1_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR1_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*Read Postamble Length*/
+#undef DDR_PHY_MR1_RDPST_DEFVAL 
+#undef DDR_PHY_MR1_RDPST_SHIFT 
+#undef DDR_PHY_MR1_RDPST_MASK 
+#define DDR_PHY_MR1_RDPST_DEFVAL                                                   0x00000004
+#define DDR_PHY_MR1_RDPST_SHIFT                                                    7
+#define DDR_PHY_MR1_RDPST_MASK                                                     0x00000080U
+
+/*Write-recovery for auto-precharge command*/
+#undef DDR_PHY_MR1_NWR_DEFVAL 
+#undef DDR_PHY_MR1_NWR_SHIFT 
+#undef DDR_PHY_MR1_NWR_MASK 
+#define DDR_PHY_MR1_NWR_DEFVAL                                                     0x00000004
+#define DDR_PHY_MR1_NWR_SHIFT                                                      4
+#define DDR_PHY_MR1_NWR_MASK                                                       0x00000070U
+
+/*Read Preamble Length*/
+#undef DDR_PHY_MR1_RDPRE_DEFVAL 
+#undef DDR_PHY_MR1_RDPRE_SHIFT 
+#undef DDR_PHY_MR1_RDPRE_MASK 
+#define DDR_PHY_MR1_RDPRE_DEFVAL                                                   0x00000004
+#define DDR_PHY_MR1_RDPRE_SHIFT                                                    3
+#define DDR_PHY_MR1_RDPRE_MASK                                                     0x00000008U
+
+/*Write Preamble Length*/
+#undef DDR_PHY_MR1_WRPRE_DEFVAL 
+#undef DDR_PHY_MR1_WRPRE_SHIFT 
+#undef DDR_PHY_MR1_WRPRE_MASK 
+#define DDR_PHY_MR1_WRPRE_DEFVAL                                                   0x00000004
+#define DDR_PHY_MR1_WRPRE_SHIFT                                                    2
+#define DDR_PHY_MR1_WRPRE_MASK                                                     0x00000004U
+
+/*Burst Length*/
+#undef DDR_PHY_MR1_BL_DEFVAL 
+#undef DDR_PHY_MR1_BL_SHIFT 
+#undef DDR_PHY_MR1_BL_MASK 
+#define DDR_PHY_MR1_BL_DEFVAL                                                      0x00000004
+#define DDR_PHY_MR1_BL_SHIFT                                                       0
+#define DDR_PHY_MR1_BL_MASK                                                        0x00000003U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR2_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR2_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR2_RESERVED_31_8_MASK 
+#define DDR_PHY_MR2_RESERVED_31_8_DEFVAL                                           0x00000000
+#define DDR_PHY_MR2_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR2_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*Write Leveling*/
+#undef DDR_PHY_MR2_WRL_DEFVAL 
+#undef DDR_PHY_MR2_WRL_SHIFT 
+#undef DDR_PHY_MR2_WRL_MASK 
+#define DDR_PHY_MR2_WRL_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR2_WRL_SHIFT                                                      7
+#define DDR_PHY_MR2_WRL_MASK                                                       0x00000080U
+
+/*Write Latency Set*/
+#undef DDR_PHY_MR2_WLS_DEFVAL 
+#undef DDR_PHY_MR2_WLS_SHIFT 
+#undef DDR_PHY_MR2_WLS_MASK 
+#define DDR_PHY_MR2_WLS_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR2_WLS_SHIFT                                                      6
+#define DDR_PHY_MR2_WLS_MASK                                                       0x00000040U
+
+/*Write Latency*/
+#undef DDR_PHY_MR2_WL_DEFVAL 
+#undef DDR_PHY_MR2_WL_SHIFT 
+#undef DDR_PHY_MR2_WL_MASK 
+#define DDR_PHY_MR2_WL_DEFVAL                                                      0x00000000
+#define DDR_PHY_MR2_WL_SHIFT                                                       3
+#define DDR_PHY_MR2_WL_MASK                                                        0x00000038U
+
+/*Read Latency*/
+#undef DDR_PHY_MR2_RL_DEFVAL 
+#undef DDR_PHY_MR2_RL_SHIFT 
+#undef DDR_PHY_MR2_RL_MASK 
+#define DDR_PHY_MR2_RL_DEFVAL                                                      0x00000000
+#define DDR_PHY_MR2_RL_SHIFT                                                       0
+#define DDR_PHY_MR2_RL_MASK                                                        0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR3_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR3_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR3_RESERVED_31_8_MASK 
+#define DDR_PHY_MR3_RESERVED_31_8_DEFVAL                                           0x00000031
+#define DDR_PHY_MR3_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR3_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*DBI-Write Enable*/
+#undef DDR_PHY_MR3_DBIWR_DEFVAL 
+#undef DDR_PHY_MR3_DBIWR_SHIFT 
+#undef DDR_PHY_MR3_DBIWR_MASK 
+#define DDR_PHY_MR3_DBIWR_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_DBIWR_SHIFT                                                    7
+#define DDR_PHY_MR3_DBIWR_MASK                                                     0x00000080U
+
+/*DBI-Read Enable*/
+#undef DDR_PHY_MR3_DBIRD_DEFVAL 
+#undef DDR_PHY_MR3_DBIRD_SHIFT 
+#undef DDR_PHY_MR3_DBIRD_MASK 
+#define DDR_PHY_MR3_DBIRD_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_DBIRD_SHIFT                                                    6
+#define DDR_PHY_MR3_DBIRD_MASK                                                     0x00000040U
+
+/*Pull-down Drive Strength*/
+#undef DDR_PHY_MR3_PDDS_DEFVAL 
+#undef DDR_PHY_MR3_PDDS_SHIFT 
+#undef DDR_PHY_MR3_PDDS_MASK 
+#define DDR_PHY_MR3_PDDS_DEFVAL                                                    0x00000031
+#define DDR_PHY_MR3_PDDS_SHIFT                                                     3
+#define DDR_PHY_MR3_PDDS_MASK                                                      0x00000038U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR3_RSVD_DEFVAL 
+#undef DDR_PHY_MR3_RSVD_SHIFT 
+#undef DDR_PHY_MR3_RSVD_MASK 
+#define DDR_PHY_MR3_RSVD_DEFVAL                                                    0x00000031
+#define DDR_PHY_MR3_RSVD_SHIFT                                                     2
+#define DDR_PHY_MR3_RSVD_MASK                                                      0x00000004U
+
+/*Write Postamble Length*/
+#undef DDR_PHY_MR3_WRPST_DEFVAL 
+#undef DDR_PHY_MR3_WRPST_SHIFT 
+#undef DDR_PHY_MR3_WRPST_MASK 
+#define DDR_PHY_MR3_WRPST_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_WRPST_SHIFT                                                    1
+#define DDR_PHY_MR3_WRPST_MASK                                                     0x00000002U
+
+/*Pull-up Calibration Point*/
+#undef DDR_PHY_MR3_PUCAL_DEFVAL 
+#undef DDR_PHY_MR3_PUCAL_SHIFT 
+#undef DDR_PHY_MR3_PUCAL_MASK 
+#define DDR_PHY_MR3_PUCAL_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_PUCAL_SHIFT                                                    0
+#define DDR_PHY_MR3_PUCAL_MASK                                                     0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR4_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_MR4_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_MR4_RESERVED_31_16_MASK 
+#define DDR_PHY_MR4_RESERVED_31_16_DEFVAL                                          0x00000000
+#define DDR_PHY_MR4_RESERVED_31_16_SHIFT                                           16
+#define DDR_PHY_MR4_RESERVED_31_16_MASK                                            0xFFFF0000U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR4_RSVD_15_13_DEFVAL 
+#undef DDR_PHY_MR4_RSVD_15_13_SHIFT 
+#undef DDR_PHY_MR4_RSVD_15_13_MASK 
+#define DDR_PHY_MR4_RSVD_15_13_DEFVAL                                              0x00000000
+#define DDR_PHY_MR4_RSVD_15_13_SHIFT                                               13
+#define DDR_PHY_MR4_RSVD_15_13_MASK                                                0x0000E000U
+
+/*Write Preamble*/
+#undef DDR_PHY_MR4_WRP_DEFVAL 
+#undef DDR_PHY_MR4_WRP_SHIFT 
+#undef DDR_PHY_MR4_WRP_MASK 
+#define DDR_PHY_MR4_WRP_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_WRP_SHIFT                                                      12
+#define DDR_PHY_MR4_WRP_MASK                                                       0x00001000U
+
+/*Read Preamble*/
+#undef DDR_PHY_MR4_RDP_DEFVAL 
+#undef DDR_PHY_MR4_RDP_SHIFT 
+#undef DDR_PHY_MR4_RDP_MASK 
+#define DDR_PHY_MR4_RDP_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_RDP_SHIFT                                                      11
+#define DDR_PHY_MR4_RDP_MASK                                                       0x00000800U
+
+/*Read Preamble Training Mode*/
+#undef DDR_PHY_MR4_RPTM_DEFVAL 
+#undef DDR_PHY_MR4_RPTM_SHIFT 
+#undef DDR_PHY_MR4_RPTM_MASK 
+#define DDR_PHY_MR4_RPTM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_RPTM_SHIFT                                                     10
+#define DDR_PHY_MR4_RPTM_MASK                                                      0x00000400U
+
+/*Self Refresh Abort*/
+#undef DDR_PHY_MR4_SRA_DEFVAL 
+#undef DDR_PHY_MR4_SRA_SHIFT 
+#undef DDR_PHY_MR4_SRA_MASK 
+#define DDR_PHY_MR4_SRA_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_SRA_SHIFT                                                      9
+#define DDR_PHY_MR4_SRA_MASK                                                       0x00000200U
+
+/*CS to Command Latency Mode*/
+#undef DDR_PHY_MR4_CS2CMDL_DEFVAL 
+#undef DDR_PHY_MR4_CS2CMDL_SHIFT 
+#undef DDR_PHY_MR4_CS2CMDL_MASK 
+#define DDR_PHY_MR4_CS2CMDL_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR4_CS2CMDL_SHIFT                                                  6
+#define DDR_PHY_MR4_CS2CMDL_MASK                                                   0x000001C0U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR4_RSVD1_DEFVAL 
+#undef DDR_PHY_MR4_RSVD1_SHIFT 
+#undef DDR_PHY_MR4_RSVD1_MASK 
+#define DDR_PHY_MR4_RSVD1_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR4_RSVD1_SHIFT                                                    5
+#define DDR_PHY_MR4_RSVD1_MASK                                                     0x00000020U
+
+/*Internal VREF Monitor*/
+#undef DDR_PHY_MR4_IVM_DEFVAL 
+#undef DDR_PHY_MR4_IVM_SHIFT 
+#undef DDR_PHY_MR4_IVM_MASK 
+#define DDR_PHY_MR4_IVM_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_IVM_SHIFT                                                      4
+#define DDR_PHY_MR4_IVM_MASK                                                       0x00000010U
+
+/*Temperature Controlled Refresh Mode*/
+#undef DDR_PHY_MR4_TCRM_DEFVAL 
+#undef DDR_PHY_MR4_TCRM_SHIFT 
+#undef DDR_PHY_MR4_TCRM_MASK 
+#define DDR_PHY_MR4_TCRM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_TCRM_SHIFT                                                     3
+#define DDR_PHY_MR4_TCRM_MASK                                                      0x00000008U
+
+/*Temperature Controlled Refresh Range*/
+#undef DDR_PHY_MR4_TCRR_DEFVAL 
+#undef DDR_PHY_MR4_TCRR_SHIFT 
+#undef DDR_PHY_MR4_TCRR_MASK 
+#define DDR_PHY_MR4_TCRR_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_TCRR_SHIFT                                                     2
+#define DDR_PHY_MR4_TCRR_MASK                                                      0x00000004U
+
+/*Maximum Power Down Mode*/
+#undef DDR_PHY_MR4_MPDM_DEFVAL 
+#undef DDR_PHY_MR4_MPDM_SHIFT 
+#undef DDR_PHY_MR4_MPDM_MASK 
+#define DDR_PHY_MR4_MPDM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_MPDM_SHIFT                                                     1
+#define DDR_PHY_MR4_MPDM_MASK                                                      0x00000002U
+
+/*This is a JEDEC reserved bit and is recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR4_RSVD_0_DEFVAL 
+#undef DDR_PHY_MR4_RSVD_0_SHIFT 
+#undef DDR_PHY_MR4_RSVD_0_MASK 
+#define DDR_PHY_MR4_RSVD_0_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR4_RSVD_0_SHIFT                                                   0
+#define DDR_PHY_MR4_RSVD_0_MASK                                                    0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR5_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_MR5_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_MR5_RESERVED_31_16_MASK 
+#define DDR_PHY_MR5_RESERVED_31_16_DEFVAL                                          0x00000000
+#define DDR_PHY_MR5_RESERVED_31_16_SHIFT                                           16
+#define DDR_PHY_MR5_RESERVED_31_16_MASK                                            0xFFFF0000U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR5_RSVD_DEFVAL 
+#undef DDR_PHY_MR5_RSVD_SHIFT 
+#undef DDR_PHY_MR5_RSVD_MASK 
+#define DDR_PHY_MR5_RSVD_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_RSVD_SHIFT                                                     13
+#define DDR_PHY_MR5_RSVD_MASK                                                      0x0000E000U
+
+/*Read DBI*/
+#undef DDR_PHY_MR5_RDBI_DEFVAL 
+#undef DDR_PHY_MR5_RDBI_SHIFT 
+#undef DDR_PHY_MR5_RDBI_MASK 
+#define DDR_PHY_MR5_RDBI_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_RDBI_SHIFT                                                     12
+#define DDR_PHY_MR5_RDBI_MASK                                                      0x00001000U
+
+/*Write DBI*/
+#undef DDR_PHY_MR5_WDBI_DEFVAL 
+#undef DDR_PHY_MR5_WDBI_SHIFT 
+#undef DDR_PHY_MR5_WDBI_MASK 
+#define DDR_PHY_MR5_WDBI_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_WDBI_SHIFT                                                     11
+#define DDR_PHY_MR5_WDBI_MASK                                                      0x00000800U
+
+/*Data Mask*/
+#undef DDR_PHY_MR5_DM_DEFVAL 
+#undef DDR_PHY_MR5_DM_SHIFT 
+#undef DDR_PHY_MR5_DM_MASK 
+#define DDR_PHY_MR5_DM_DEFVAL                                                      0x00000000
+#define DDR_PHY_MR5_DM_SHIFT                                                       10
+#define DDR_PHY_MR5_DM_MASK                                                        0x00000400U
+
+/*CA Parity Persistent Error*/
+#undef DDR_PHY_MR5_CAPPE_DEFVAL 
+#undef DDR_PHY_MR5_CAPPE_SHIFT 
+#undef DDR_PHY_MR5_CAPPE_MASK 
+#define DDR_PHY_MR5_CAPPE_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR5_CAPPE_SHIFT                                                    9
+#define DDR_PHY_MR5_CAPPE_MASK                                                     0x00000200U
+
+/*RTT_PARK*/
+#undef DDR_PHY_MR5_RTTPARK_DEFVAL 
+#undef DDR_PHY_MR5_RTTPARK_SHIFT 
+#undef DDR_PHY_MR5_RTTPARK_MASK 
+#define DDR_PHY_MR5_RTTPARK_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR5_RTTPARK_SHIFT                                                  6
+#define DDR_PHY_MR5_RTTPARK_MASK                                                   0x000001C0U
+
+/*ODT Input Buffer during Power Down mode*/
+#undef DDR_PHY_MR5_ODTIBPD_DEFVAL 
+#undef DDR_PHY_MR5_ODTIBPD_SHIFT 
+#undef DDR_PHY_MR5_ODTIBPD_MASK 
+#define DDR_PHY_MR5_ODTIBPD_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR5_ODTIBPD_SHIFT                                                  5
+#define DDR_PHY_MR5_ODTIBPD_MASK                                                   0x00000020U
+
+/*C/A Parity Error Status*/
+#undef DDR_PHY_MR5_CAPES_DEFVAL 
+#undef DDR_PHY_MR5_CAPES_SHIFT 
+#undef DDR_PHY_MR5_CAPES_MASK 
+#define DDR_PHY_MR5_CAPES_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR5_CAPES_SHIFT                                                    4
+#define DDR_PHY_MR5_CAPES_MASK                                                     0x00000010U
+
+/*CRC Error Clear*/
+#undef DDR_PHY_MR5_CRCEC_DEFVAL 
+#undef DDR_PHY_MR5_CRCEC_SHIFT 
+#undef DDR_PHY_MR5_CRCEC_MASK 
+#define DDR_PHY_MR5_CRCEC_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR5_CRCEC_SHIFT                                                    3
+#define DDR_PHY_MR5_CRCEC_MASK                                                     0x00000008U
+
+/*C/A Parity Latency Mode*/
+#undef DDR_PHY_MR5_CAPM_DEFVAL 
+#undef DDR_PHY_MR5_CAPM_SHIFT 
+#undef DDR_PHY_MR5_CAPM_MASK 
+#define DDR_PHY_MR5_CAPM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_CAPM_SHIFT                                                     0
+#define DDR_PHY_MR5_CAPM_MASK                                                      0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR6_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_MR6_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_MR6_RESERVED_31_16_MASK 
+#define DDR_PHY_MR6_RESERVED_31_16_DEFVAL                                          0x00000000
+#define DDR_PHY_MR6_RESERVED_31_16_SHIFT                                           16
+#define DDR_PHY_MR6_RESERVED_31_16_MASK                                            0xFFFF0000U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR6_RSVD_15_13_DEFVAL 
+#undef DDR_PHY_MR6_RSVD_15_13_SHIFT 
+#undef DDR_PHY_MR6_RSVD_15_13_MASK 
+#define DDR_PHY_MR6_RSVD_15_13_DEFVAL                                              0x00000000
+#define DDR_PHY_MR6_RSVD_15_13_SHIFT                                               13
+#define DDR_PHY_MR6_RSVD_15_13_MASK                                                0x0000E000U
+
+/*CAS_n to CAS_n command delay for same bank group (tCCD_L)*/
+#undef DDR_PHY_MR6_TCCDL_DEFVAL 
+#undef DDR_PHY_MR6_TCCDL_SHIFT 
+#undef DDR_PHY_MR6_TCCDL_MASK 
+#define DDR_PHY_MR6_TCCDL_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR6_TCCDL_SHIFT                                                    10
+#define DDR_PHY_MR6_TCCDL_MASK                                                     0x00001C00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR6_RSVD_9_8_DEFVAL 
+#undef DDR_PHY_MR6_RSVD_9_8_SHIFT 
+#undef DDR_PHY_MR6_RSVD_9_8_MASK 
+#define DDR_PHY_MR6_RSVD_9_8_DEFVAL                                                0x00000000
+#define DDR_PHY_MR6_RSVD_9_8_SHIFT                                                 8
+#define DDR_PHY_MR6_RSVD_9_8_MASK                                                  0x00000300U
+
+/*VrefDQ Training Enable*/
+#undef DDR_PHY_MR6_VDDQTEN_DEFVAL 
+#undef DDR_PHY_MR6_VDDQTEN_SHIFT 
+#undef DDR_PHY_MR6_VDDQTEN_MASK 
+#define DDR_PHY_MR6_VDDQTEN_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR6_VDDQTEN_SHIFT                                                  7
+#define DDR_PHY_MR6_VDDQTEN_MASK                                                   0x00000080U
+
+/*VrefDQ Training Range*/
+#undef DDR_PHY_MR6_VDQTRG_DEFVAL 
+#undef DDR_PHY_MR6_VDQTRG_SHIFT 
+#undef DDR_PHY_MR6_VDQTRG_MASK 
+#define DDR_PHY_MR6_VDQTRG_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR6_VDQTRG_SHIFT                                                   6
+#define DDR_PHY_MR6_VDQTRG_MASK                                                    0x00000040U
+
+/*VrefDQ Training Values*/
+#undef DDR_PHY_MR6_VDQTVAL_DEFVAL 
+#undef DDR_PHY_MR6_VDQTVAL_SHIFT 
+#undef DDR_PHY_MR6_VDQTVAL_MASK 
+#define DDR_PHY_MR6_VDQTVAL_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR6_VDQTVAL_SHIFT                                                  0
+#define DDR_PHY_MR6_VDQTVAL_MASK                                                   0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR11_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR11_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR11_RESERVED_31_8_MASK 
+#define DDR_PHY_MR11_RESERVED_31_8_DEFVAL                                          0x00000000
+#define DDR_PHY_MR11_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR11_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR11_RSVD_DEFVAL 
+#undef DDR_PHY_MR11_RSVD_SHIFT 
+#undef DDR_PHY_MR11_RSVD_MASK 
+#define DDR_PHY_MR11_RSVD_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR11_RSVD_SHIFT                                                    3
+#define DDR_PHY_MR11_RSVD_MASK                                                     0x000000F8U
+
+/*Power Down Control*/
+#undef DDR_PHY_MR11_PDCTL_DEFVAL 
+#undef DDR_PHY_MR11_PDCTL_SHIFT 
+#undef DDR_PHY_MR11_PDCTL_MASK 
+#define DDR_PHY_MR11_PDCTL_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR11_PDCTL_SHIFT                                                   2
+#define DDR_PHY_MR11_PDCTL_MASK                                                    0x00000004U
+
+/*DQ Bus Receiver On-Die-Termination*/
+#undef DDR_PHY_MR11_DQODT_DEFVAL 
+#undef DDR_PHY_MR11_DQODT_SHIFT 
+#undef DDR_PHY_MR11_DQODT_MASK 
+#define DDR_PHY_MR11_DQODT_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR11_DQODT_SHIFT                                                   0
+#define DDR_PHY_MR11_DQODT_MASK                                                    0x00000003U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR12_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR12_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR12_RESERVED_31_8_MASK 
+#define DDR_PHY_MR12_RESERVED_31_8_DEFVAL                                          0x0000004D
+#define DDR_PHY_MR12_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR12_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR12_RSVD_DEFVAL 
+#undef DDR_PHY_MR12_RSVD_SHIFT 
+#undef DDR_PHY_MR12_RSVD_MASK 
+#define DDR_PHY_MR12_RSVD_DEFVAL                                                   0x0000004D
+#define DDR_PHY_MR12_RSVD_SHIFT                                                    7
+#define DDR_PHY_MR12_RSVD_MASK                                                     0x00000080U
+
+/*VREF_CA Range Select.*/
+#undef DDR_PHY_MR12_VR_CA_DEFVAL 
+#undef DDR_PHY_MR12_VR_CA_SHIFT 
+#undef DDR_PHY_MR12_VR_CA_MASK 
+#define DDR_PHY_MR12_VR_CA_DEFVAL                                                  0x0000004D
+#define DDR_PHY_MR12_VR_CA_SHIFT                                                   6
+#define DDR_PHY_MR12_VR_CA_MASK                                                    0x00000040U
+
+/*Controls the VREF(ca) levels for Frequency-Set-Point[1:0].*/
+#undef DDR_PHY_MR12_VREF_CA_DEFVAL 
+#undef DDR_PHY_MR12_VREF_CA_SHIFT 
+#undef DDR_PHY_MR12_VREF_CA_MASK 
+#define DDR_PHY_MR12_VREF_CA_DEFVAL                                                0x0000004D
+#define DDR_PHY_MR12_VREF_CA_SHIFT                                                 0
+#define DDR_PHY_MR12_VREF_CA_MASK                                                  0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR13_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR13_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR13_RESERVED_31_8_MASK 
+#define DDR_PHY_MR13_RESERVED_31_8_DEFVAL                                          0x00000000
+#define DDR_PHY_MR13_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR13_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*Frequency Set Point Operation Mode*/
+#undef DDR_PHY_MR13_FSPOP_DEFVAL 
+#undef DDR_PHY_MR13_FSPOP_SHIFT 
+#undef DDR_PHY_MR13_FSPOP_MASK 
+#define DDR_PHY_MR13_FSPOP_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR13_FSPOP_SHIFT                                                   7
+#define DDR_PHY_MR13_FSPOP_MASK                                                    0x00000080U
+
+/*Frequency Set Point Write Enable*/
+#undef DDR_PHY_MR13_FSPWR_DEFVAL 
+#undef DDR_PHY_MR13_FSPWR_SHIFT 
+#undef DDR_PHY_MR13_FSPWR_MASK 
+#define DDR_PHY_MR13_FSPWR_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR13_FSPWR_SHIFT                                                   6
+#define DDR_PHY_MR13_FSPWR_MASK                                                    0x00000040U
+
+/*Data Mask Enable*/
+#undef DDR_PHY_MR13_DMD_DEFVAL 
+#undef DDR_PHY_MR13_DMD_SHIFT 
+#undef DDR_PHY_MR13_DMD_MASK 
+#define DDR_PHY_MR13_DMD_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_DMD_SHIFT                                                     5
+#define DDR_PHY_MR13_DMD_MASK                                                      0x00000020U
+
+/*Refresh Rate Option*/
+#undef DDR_PHY_MR13_RRO_DEFVAL 
+#undef DDR_PHY_MR13_RRO_SHIFT 
+#undef DDR_PHY_MR13_RRO_MASK 
+#define DDR_PHY_MR13_RRO_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_RRO_SHIFT                                                     4
+#define DDR_PHY_MR13_RRO_MASK                                                      0x00000010U
+
+/*VREF Current Generator*/
+#undef DDR_PHY_MR13_VRCG_DEFVAL 
+#undef DDR_PHY_MR13_VRCG_SHIFT 
+#undef DDR_PHY_MR13_VRCG_MASK 
+#define DDR_PHY_MR13_VRCG_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR13_VRCG_SHIFT                                                    3
+#define DDR_PHY_MR13_VRCG_MASK                                                     0x00000008U
+
+/*VREF Output*/
+#undef DDR_PHY_MR13_VRO_DEFVAL 
+#undef DDR_PHY_MR13_VRO_SHIFT 
+#undef DDR_PHY_MR13_VRO_MASK 
+#define DDR_PHY_MR13_VRO_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_VRO_SHIFT                                                     2
+#define DDR_PHY_MR13_VRO_MASK                                                      0x00000004U
+
+/*Read Preamble Training Mode*/
+#undef DDR_PHY_MR13_RPT_DEFVAL 
+#undef DDR_PHY_MR13_RPT_SHIFT 
+#undef DDR_PHY_MR13_RPT_MASK 
+#define DDR_PHY_MR13_RPT_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_RPT_SHIFT                                                     1
+#define DDR_PHY_MR13_RPT_MASK                                                      0x00000002U
+
+/*Command Bus Training*/
+#undef DDR_PHY_MR13_CBT_DEFVAL 
+#undef DDR_PHY_MR13_CBT_SHIFT 
+#undef DDR_PHY_MR13_CBT_MASK 
+#define DDR_PHY_MR13_CBT_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_CBT_SHIFT                                                     0
+#define DDR_PHY_MR13_CBT_MASK                                                      0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR14_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR14_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR14_RESERVED_31_8_MASK 
+#define DDR_PHY_MR14_RESERVED_31_8_DEFVAL                                          0x0000004D
+#define DDR_PHY_MR14_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR14_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR14_RSVD_DEFVAL 
+#undef DDR_PHY_MR14_RSVD_SHIFT 
+#undef DDR_PHY_MR14_RSVD_MASK 
+#define DDR_PHY_MR14_RSVD_DEFVAL                                                   0x0000004D
+#define DDR_PHY_MR14_RSVD_SHIFT                                                    7
+#define DDR_PHY_MR14_RSVD_MASK                                                     0x00000080U
+
+/*VREFDQ Range Selects.*/
+#undef DDR_PHY_MR14_VR_DQ_DEFVAL 
+#undef DDR_PHY_MR14_VR_DQ_SHIFT 
+#undef DDR_PHY_MR14_VR_DQ_MASK 
+#define DDR_PHY_MR14_VR_DQ_DEFVAL                                                  0x0000004D
+#define DDR_PHY_MR14_VR_DQ_SHIFT                                                   6
+#define DDR_PHY_MR14_VR_DQ_MASK                                                    0x00000040U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR14_VREF_DQ_DEFVAL 
+#undef DDR_PHY_MR14_VREF_DQ_SHIFT 
+#undef DDR_PHY_MR14_VREF_DQ_MASK 
+#define DDR_PHY_MR14_VREF_DQ_DEFVAL                                                0x0000004D
+#define DDR_PHY_MR14_VREF_DQ_SHIFT                                                 0
+#define DDR_PHY_MR14_VREF_DQ_MASK                                                  0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR22_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR22_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR22_RESERVED_31_8_MASK 
+#define DDR_PHY_MR22_RESERVED_31_8_DEFVAL                                          0x00000000
+#define DDR_PHY_MR22_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR22_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR22_RSVD_DEFVAL 
+#undef DDR_PHY_MR22_RSVD_SHIFT 
+#undef DDR_PHY_MR22_RSVD_MASK 
+#define DDR_PHY_MR22_RSVD_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR22_RSVD_SHIFT                                                    6
+#define DDR_PHY_MR22_RSVD_MASK                                                     0x000000C0U
+
+/*CA ODT termination disable.*/
+#undef DDR_PHY_MR22_ODTD_CA_DEFVAL 
+#undef DDR_PHY_MR22_ODTD_CA_SHIFT 
+#undef DDR_PHY_MR22_ODTD_CA_MASK 
+#define DDR_PHY_MR22_ODTD_CA_DEFVAL                                                0x00000000
+#define DDR_PHY_MR22_ODTD_CA_SHIFT                                                 5
+#define DDR_PHY_MR22_ODTD_CA_MASK                                                  0x00000020U
+
+/*ODT CS override.*/
+#undef DDR_PHY_MR22_ODTE_CS_DEFVAL 
+#undef DDR_PHY_MR22_ODTE_CS_SHIFT 
+#undef DDR_PHY_MR22_ODTE_CS_MASK 
+#define DDR_PHY_MR22_ODTE_CS_DEFVAL                                                0x00000000
+#define DDR_PHY_MR22_ODTE_CS_SHIFT                                                 4
+#define DDR_PHY_MR22_ODTE_CS_MASK                                                  0x00000010U
+
+/*ODT CK override.*/
+#undef DDR_PHY_MR22_ODTE_CK_DEFVAL 
+#undef DDR_PHY_MR22_ODTE_CK_SHIFT 
+#undef DDR_PHY_MR22_ODTE_CK_MASK 
+#define DDR_PHY_MR22_ODTE_CK_DEFVAL                                                0x00000000
+#define DDR_PHY_MR22_ODTE_CK_SHIFT                                                 3
+#define DDR_PHY_MR22_ODTE_CK_MASK                                                  0x00000008U
+
+/*Controller ODT value for VOH calibration.*/
+#undef DDR_PHY_MR22_CODT_DEFVAL 
+#undef DDR_PHY_MR22_CODT_SHIFT 
+#undef DDR_PHY_MR22_CODT_MASK 
+#define DDR_PHY_MR22_CODT_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR22_CODT_SHIFT                                                    0
+#define DDR_PHY_MR22_CODT_MASK                                                     0x00000007U
+
+/*Refresh During Training*/
+#undef DDR_PHY_DTCR0_RFSHDT_DEFVAL 
+#undef DDR_PHY_DTCR0_RFSHDT_SHIFT 
+#undef DDR_PHY_DTCR0_RFSHDT_MASK 
+#define DDR_PHY_DTCR0_RFSHDT_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_RFSHDT_SHIFT                                                 28
+#define DDR_PHY_DTCR0_RFSHDT_MASK                                                  0xF0000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR0_RESERVED_27_26_DEFVAL 
+#undef DDR_PHY_DTCR0_RESERVED_27_26_SHIFT 
+#undef DDR_PHY_DTCR0_RESERVED_27_26_MASK 
+#define DDR_PHY_DTCR0_RESERVED_27_26_DEFVAL                                        0x800091C7
+#define DDR_PHY_DTCR0_RESERVED_27_26_SHIFT                                         26
+#define DDR_PHY_DTCR0_RESERVED_27_26_MASK                                          0x0C000000U
+
+/*Data Training Debug Rank Select*/
+#undef DDR_PHY_DTCR0_DTDRS_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDRS_SHIFT 
+#undef DDR_PHY_DTCR0_DTDRS_MASK 
+#define DDR_PHY_DTCR0_DTDRS_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTDRS_SHIFT                                                  24
+#define DDR_PHY_DTCR0_DTDRS_MASK                                                   0x03000000U
+
+/*Data Training with Early/Extended Gate*/
+#undef DDR_PHY_DTCR0_DTEXG_DEFVAL 
+#undef DDR_PHY_DTCR0_DTEXG_SHIFT 
+#undef DDR_PHY_DTCR0_DTEXG_MASK 
+#define DDR_PHY_DTCR0_DTEXG_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTEXG_SHIFT                                                  23
+#define DDR_PHY_DTCR0_DTEXG_MASK                                                   0x00800000U
+
+/*Data Training Extended Write DQS*/
+#undef DDR_PHY_DTCR0_DTEXD_DEFVAL 
+#undef DDR_PHY_DTCR0_DTEXD_SHIFT 
+#undef DDR_PHY_DTCR0_DTEXD_MASK 
+#define DDR_PHY_DTCR0_DTEXD_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTEXD_SHIFT                                                  22
+#define DDR_PHY_DTCR0_DTEXD_MASK                                                   0x00400000U
+
+/*Data Training Debug Step*/
+#undef DDR_PHY_DTCR0_DTDSTP_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDSTP_SHIFT 
+#undef DDR_PHY_DTCR0_DTDSTP_MASK 
+#define DDR_PHY_DTCR0_DTDSTP_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_DTDSTP_SHIFT                                                 21
+#define DDR_PHY_DTCR0_DTDSTP_MASK                                                  0x00200000U
+
+/*Data Training Debug Enable*/
+#undef DDR_PHY_DTCR0_DTDEN_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDEN_SHIFT 
+#undef DDR_PHY_DTCR0_DTDEN_MASK 
+#define DDR_PHY_DTCR0_DTDEN_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTDEN_SHIFT                                                  20
+#define DDR_PHY_DTCR0_DTDEN_MASK                                                   0x00100000U
+
+/*Data Training Debug Byte Select*/
+#undef DDR_PHY_DTCR0_DTDBS_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDBS_SHIFT 
+#undef DDR_PHY_DTCR0_DTDBS_MASK 
+#define DDR_PHY_DTCR0_DTDBS_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTDBS_SHIFT                                                  16
+#define DDR_PHY_DTCR0_DTDBS_MASK                                                   0x000F0000U
+
+/*Data Training read DBI deskewing configuration*/
+#undef DDR_PHY_DTCR0_DTRDBITR_DEFVAL 
+#undef DDR_PHY_DTCR0_DTRDBITR_SHIFT 
+#undef DDR_PHY_DTCR0_DTRDBITR_MASK 
+#define DDR_PHY_DTCR0_DTRDBITR_DEFVAL                                              0x800091C7
+#define DDR_PHY_DTCR0_DTRDBITR_SHIFT                                               14
+#define DDR_PHY_DTCR0_DTRDBITR_MASK                                                0x0000C000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR0_RESERVED_13_DEFVAL 
+#undef DDR_PHY_DTCR0_RESERVED_13_SHIFT 
+#undef DDR_PHY_DTCR0_RESERVED_13_MASK 
+#define DDR_PHY_DTCR0_RESERVED_13_DEFVAL                                           0x800091C7
+#define DDR_PHY_DTCR0_RESERVED_13_SHIFT                                            13
+#define DDR_PHY_DTCR0_RESERVED_13_MASK                                             0x00002000U
+
+/*Data Training Write Bit Deskew Data Mask*/
+#undef DDR_PHY_DTCR0_DTWBDDM_DEFVAL 
+#undef DDR_PHY_DTCR0_DTWBDDM_SHIFT 
+#undef DDR_PHY_DTCR0_DTWBDDM_MASK 
+#define DDR_PHY_DTCR0_DTWBDDM_DEFVAL                                               0x800091C7
+#define DDR_PHY_DTCR0_DTWBDDM_SHIFT                                                12
+#define DDR_PHY_DTCR0_DTWBDDM_MASK                                                 0x00001000U
+
+/*Refreshes Issued During Entry to Training*/
+#undef DDR_PHY_DTCR0_RFSHEN_DEFVAL 
+#undef DDR_PHY_DTCR0_RFSHEN_SHIFT 
+#undef DDR_PHY_DTCR0_RFSHEN_MASK 
+#define DDR_PHY_DTCR0_RFSHEN_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_RFSHEN_SHIFT                                                 8
+#define DDR_PHY_DTCR0_RFSHEN_MASK                                                  0x00000F00U
+
+/*Data Training Compare Data*/
+#undef DDR_PHY_DTCR0_DTCMPD_DEFVAL 
+#undef DDR_PHY_DTCR0_DTCMPD_SHIFT 
+#undef DDR_PHY_DTCR0_DTCMPD_MASK 
+#define DDR_PHY_DTCR0_DTCMPD_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_DTCMPD_SHIFT                                                 7
+#define DDR_PHY_DTCR0_DTCMPD_MASK                                                  0x00000080U
+
+/*Data Training Using MPR*/
+#undef DDR_PHY_DTCR0_DTMPR_DEFVAL 
+#undef DDR_PHY_DTCR0_DTMPR_SHIFT 
+#undef DDR_PHY_DTCR0_DTMPR_MASK 
+#define DDR_PHY_DTCR0_DTMPR_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTMPR_SHIFT                                                  6
+#define DDR_PHY_DTCR0_DTMPR_MASK                                                   0x00000040U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR0_RESERVED_5_4_DEFVAL 
+#undef DDR_PHY_DTCR0_RESERVED_5_4_SHIFT 
+#undef DDR_PHY_DTCR0_RESERVED_5_4_MASK 
+#define DDR_PHY_DTCR0_RESERVED_5_4_DEFVAL                                          0x800091C7
+#define DDR_PHY_DTCR0_RESERVED_5_4_SHIFT                                           4
+#define DDR_PHY_DTCR0_RESERVED_5_4_MASK                                            0x00000030U
+
+/*Data Training Repeat Number*/
+#undef DDR_PHY_DTCR0_DTRPTN_DEFVAL 
+#undef DDR_PHY_DTCR0_DTRPTN_SHIFT 
+#undef DDR_PHY_DTCR0_DTRPTN_MASK 
+#define DDR_PHY_DTCR0_DTRPTN_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_DTRPTN_SHIFT                                                 0
+#define DDR_PHY_DTCR0_DTRPTN_MASK                                                  0x0000000FU
+
+/*Rank Enable.*/
+#undef DDR_PHY_DTCR1_RANKEN_RSVD_DEFVAL 
+#undef DDR_PHY_DTCR1_RANKEN_RSVD_SHIFT 
+#undef DDR_PHY_DTCR1_RANKEN_RSVD_MASK 
+#define DDR_PHY_DTCR1_RANKEN_RSVD_DEFVAL                                           0x00030237
+#define DDR_PHY_DTCR1_RANKEN_RSVD_SHIFT                                            18
+#define DDR_PHY_DTCR1_RANKEN_RSVD_MASK                                             0xFFFC0000U
+
+/*Rank Enable.*/
+#undef DDR_PHY_DTCR1_RANKEN_DEFVAL 
+#undef DDR_PHY_DTCR1_RANKEN_SHIFT 
+#undef DDR_PHY_DTCR1_RANKEN_MASK 
+#define DDR_PHY_DTCR1_RANKEN_DEFVAL                                                0x00030237
+#define DDR_PHY_DTCR1_RANKEN_SHIFT                                                 16
+#define DDR_PHY_DTCR1_RANKEN_MASK                                                  0x00030000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_15_14_MASK 
+#define DDR_PHY_DTCR1_RESERVED_15_14_DEFVAL                                        0x00030237
+#define DDR_PHY_DTCR1_RESERVED_15_14_SHIFT                                         14
+#define DDR_PHY_DTCR1_RESERVED_15_14_MASK                                          0x0000C000U
+
+/*Data Training Rank*/
+#undef DDR_PHY_DTCR1_DTRANK_DEFVAL 
+#undef DDR_PHY_DTCR1_DTRANK_SHIFT 
+#undef DDR_PHY_DTCR1_DTRANK_MASK 
+#define DDR_PHY_DTCR1_DTRANK_DEFVAL                                                0x00030237
+#define DDR_PHY_DTCR1_DTRANK_SHIFT                                                 12
+#define DDR_PHY_DTCR1_DTRANK_MASK                                                  0x00003000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_11_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_11_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_11_MASK 
+#define DDR_PHY_DTCR1_RESERVED_11_DEFVAL                                           0x00030237
+#define DDR_PHY_DTCR1_RESERVED_11_SHIFT                                            11
+#define DDR_PHY_DTCR1_RESERVED_11_MASK                                             0x00000800U
+
+/*Read Leveling Gate Sampling Difference*/
+#undef DDR_PHY_DTCR1_RDLVLGDIFF_DEFVAL 
+#undef DDR_PHY_DTCR1_RDLVLGDIFF_SHIFT 
+#undef DDR_PHY_DTCR1_RDLVLGDIFF_MASK 
+#define DDR_PHY_DTCR1_RDLVLGDIFF_DEFVAL                                            0x00030237
+#define DDR_PHY_DTCR1_RDLVLGDIFF_SHIFT                                             8
+#define DDR_PHY_DTCR1_RDLVLGDIFF_MASK                                              0x00000700U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_7_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_7_MASK 
+#define DDR_PHY_DTCR1_RESERVED_7_DEFVAL                                            0x00030237
+#define DDR_PHY_DTCR1_RESERVED_7_SHIFT                                             7
+#define DDR_PHY_DTCR1_RESERVED_7_MASK                                              0x00000080U
+
+/*Read Leveling Gate Shift*/
+#undef DDR_PHY_DTCR1_RDLVLGS_DEFVAL 
+#undef DDR_PHY_DTCR1_RDLVLGS_SHIFT 
+#undef DDR_PHY_DTCR1_RDLVLGS_MASK 
+#define DDR_PHY_DTCR1_RDLVLGS_DEFVAL                                               0x00030237
+#define DDR_PHY_DTCR1_RDLVLGS_SHIFT                                                4
+#define DDR_PHY_DTCR1_RDLVLGS_MASK                                                 0x00000070U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_3_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_3_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_3_MASK 
+#define DDR_PHY_DTCR1_RESERVED_3_DEFVAL                                            0x00030237
+#define DDR_PHY_DTCR1_RESERVED_3_SHIFT                                             3
+#define DDR_PHY_DTCR1_RESERVED_3_MASK                                              0x00000008U
+
+/*Read Preamble Training enable*/
+#undef DDR_PHY_DTCR1_RDPRMVL_TRN_DEFVAL 
+#undef DDR_PHY_DTCR1_RDPRMVL_TRN_SHIFT 
+#undef DDR_PHY_DTCR1_RDPRMVL_TRN_MASK 
+#define DDR_PHY_DTCR1_RDPRMVL_TRN_DEFVAL                                           0x00030237
+#define DDR_PHY_DTCR1_RDPRMVL_TRN_SHIFT                                            2
+#define DDR_PHY_DTCR1_RDPRMVL_TRN_MASK                                             0x00000004U
+
+/*Read Leveling Enable*/
+#undef DDR_PHY_DTCR1_RDLVLEN_DEFVAL 
+#undef DDR_PHY_DTCR1_RDLVLEN_SHIFT 
+#undef DDR_PHY_DTCR1_RDLVLEN_MASK 
+#define DDR_PHY_DTCR1_RDLVLEN_DEFVAL                                               0x00030237
+#define DDR_PHY_DTCR1_RDLVLEN_SHIFT                                                1
+#define DDR_PHY_DTCR1_RDLVLEN_MASK                                                 0x00000002U
+
+/*Basic Gate Training Enable*/
+#undef DDR_PHY_DTCR1_BSTEN_DEFVAL 
+#undef DDR_PHY_DTCR1_BSTEN_SHIFT 
+#undef DDR_PHY_DTCR1_BSTEN_MASK 
+#define DDR_PHY_DTCR1_BSTEN_DEFVAL                                                 0x00030237
+#define DDR_PHY_DTCR1_BSTEN_SHIFT                                                  0
+#define DDR_PHY_DTCR1_BSTEN_MASK                                                   0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_CATR0_RESERVED_31_21_DEFVAL 
+#undef DDR_PHY_CATR0_RESERVED_31_21_SHIFT 
+#undef DDR_PHY_CATR0_RESERVED_31_21_MASK 
+#define DDR_PHY_CATR0_RESERVED_31_21_DEFVAL                                        0x00141054
+#define DDR_PHY_CATR0_RESERVED_31_21_SHIFT                                         21
+#define DDR_PHY_CATR0_RESERVED_31_21_MASK                                          0xFFE00000U
+
+/*Minimum time (in terms of number of dram clocks) between two consectuve CA calibration command*/
+#undef DDR_PHY_CATR0_CACD_DEFVAL 
+#undef DDR_PHY_CATR0_CACD_SHIFT 
+#undef DDR_PHY_CATR0_CACD_MASK 
+#define DDR_PHY_CATR0_CACD_DEFVAL                                                  0x00141054
+#define DDR_PHY_CATR0_CACD_SHIFT                                                   16
+#define DDR_PHY_CATR0_CACD_MASK                                                    0x001F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_CATR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_CATR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_CATR0_RESERVED_15_13_MASK 
+#define DDR_PHY_CATR0_RESERVED_15_13_DEFVAL                                        0x00141054
+#define DDR_PHY_CATR0_RESERVED_15_13_SHIFT                                         13
+#define DDR_PHY_CATR0_RESERVED_15_13_MASK                                          0x0000E000U
+
+/*Minimum time (in terms of number of dram clocks) PUB should wait before sampling the CA response after Calibration command ha
+		 been sent to the memory*/
+#undef DDR_PHY_CATR0_CAADR_DEFVAL 
+#undef DDR_PHY_CATR0_CAADR_SHIFT 
+#undef DDR_PHY_CATR0_CAADR_MASK 
+#define DDR_PHY_CATR0_CAADR_DEFVAL                                                 0x00141054
+#define DDR_PHY_CATR0_CAADR_SHIFT                                                  8
+#define DDR_PHY_CATR0_CAADR_MASK                                                   0x00001F00U
+
+/*CA_1 Response Byte Lane 1*/
+#undef DDR_PHY_CATR0_CA1BYTE1_DEFVAL 
+#undef DDR_PHY_CATR0_CA1BYTE1_SHIFT 
+#undef DDR_PHY_CATR0_CA1BYTE1_MASK 
+#define DDR_PHY_CATR0_CA1BYTE1_DEFVAL                                              0x00141054
+#define DDR_PHY_CATR0_CA1BYTE1_SHIFT                                               4
+#define DDR_PHY_CATR0_CA1BYTE1_MASK                                                0x000000F0U
+
+/*CA_1 Response Byte Lane 0*/
+#undef DDR_PHY_CATR0_CA1BYTE0_DEFVAL 
+#undef DDR_PHY_CATR0_CA1BYTE0_SHIFT 
+#undef DDR_PHY_CATR0_CA1BYTE0_MASK 
+#define DDR_PHY_CATR0_CA1BYTE0_DEFVAL                                              0x00141054
+#define DDR_PHY_CATR0_CA1BYTE0_SHIFT                                               0
+#define DDR_PHY_CATR0_CA1BYTE0_MASK                                                0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RIOCR5_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_RIOCR5_RESERVED_31_16_MASK 
+#define DDR_PHY_RIOCR5_RESERVED_31_16_DEFVAL                                       0x00000005
+#define DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT                                        16
+#define DDR_PHY_RIOCR5_RESERVED_31_16_MASK                                         0xFFFF0000U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_RIOCR5_ODTOEMODE_RSVD_DEFVAL 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_RSVD_SHIFT 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_RSVD_MASK 
+#define DDR_PHY_RIOCR5_ODTOEMODE_RSVD_DEFVAL                                       0x00000005
+#define DDR_PHY_RIOCR5_ODTOEMODE_RSVD_SHIFT                                        4
+#define DDR_PHY_RIOCR5_ODTOEMODE_RSVD_MASK                                         0x0000FFF0U
+
+/*SDRAM On-die Termination Output Enable (OE) Mode Selection.*/
+#undef DDR_PHY_RIOCR5_ODTOEMODE_DEFVAL 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_SHIFT 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_MASK 
+#define DDR_PHY_RIOCR5_ODTOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_RIOCR5_ODTOEMODE_SHIFT                                             0
+#define DDR_PHY_RIOCR5_ODTOEMODE_MASK                                              0x0000000FU
+
+/*Address/Command Slew Rate (D3F I/O Only)*/
+#undef DDR_PHY_ACIOCR0_ACSR_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACSR_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACSR_MASK 
+#define DDR_PHY_ACIOCR0_ACSR_DEFVAL                                                0x30000000
+#define DDR_PHY_ACIOCR0_ACSR_SHIFT                                                 30
+#define DDR_PHY_ACIOCR0_ACSR_MASK                                                  0xC0000000U
+
+/*SDRAM Reset I/O Mode*/
+#undef DDR_PHY_ACIOCR0_RSTIOM_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RSTIOM_SHIFT 
+#undef DDR_PHY_ACIOCR0_RSTIOM_MASK 
+#define DDR_PHY_ACIOCR0_RSTIOM_DEFVAL                                              0x30000000
+#define DDR_PHY_ACIOCR0_RSTIOM_SHIFT                                               29
+#define DDR_PHY_ACIOCR0_RSTIOM_MASK                                                0x20000000U
+
+/*SDRAM Reset Power Down Receiver*/
+#undef DDR_PHY_ACIOCR0_RSTPDR_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RSTPDR_SHIFT 
+#undef DDR_PHY_ACIOCR0_RSTPDR_MASK 
+#define DDR_PHY_ACIOCR0_RSTPDR_DEFVAL                                              0x30000000
+#define DDR_PHY_ACIOCR0_RSTPDR_SHIFT                                               28
+#define DDR_PHY_ACIOCR0_RSTPDR_MASK                                                0x10000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR0_RESERVED_27_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RESERVED_27_SHIFT 
+#undef DDR_PHY_ACIOCR0_RESERVED_27_MASK 
+#define DDR_PHY_ACIOCR0_RESERVED_27_DEFVAL                                         0x30000000
+#define DDR_PHY_ACIOCR0_RESERVED_27_SHIFT                                          27
+#define DDR_PHY_ACIOCR0_RESERVED_27_MASK                                           0x08000000U
+
+/*SDRAM Reset On-Die Termination*/
+#undef DDR_PHY_ACIOCR0_RSTODT_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RSTODT_SHIFT 
+#undef DDR_PHY_ACIOCR0_RSTODT_MASK 
+#define DDR_PHY_ACIOCR0_RSTODT_DEFVAL                                              0x30000000
+#define DDR_PHY_ACIOCR0_RSTODT_SHIFT                                               26
+#define DDR_PHY_ACIOCR0_RSTODT_MASK                                                0x04000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR0_RESERVED_25_10_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RESERVED_25_10_SHIFT 
+#undef DDR_PHY_ACIOCR0_RESERVED_25_10_MASK 
+#define DDR_PHY_ACIOCR0_RESERVED_25_10_DEFVAL                                      0x30000000
+#define DDR_PHY_ACIOCR0_RESERVED_25_10_SHIFT                                       10
+#define DDR_PHY_ACIOCR0_RESERVED_25_10_MASK                                        0x03FFFC00U
+
+/*CK Duty Cycle Correction*/
+#undef DDR_PHY_ACIOCR0_CKDCC_DEFVAL 
+#undef DDR_PHY_ACIOCR0_CKDCC_SHIFT 
+#undef DDR_PHY_ACIOCR0_CKDCC_MASK 
+#define DDR_PHY_ACIOCR0_CKDCC_DEFVAL                                               0x30000000
+#define DDR_PHY_ACIOCR0_CKDCC_SHIFT                                                6
+#define DDR_PHY_ACIOCR0_CKDCC_MASK                                                 0x000003C0U
+
+/*AC Power Down Receiver Mode*/
+#undef DDR_PHY_ACIOCR0_ACPDRMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACPDRMODE_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACPDRMODE_MASK 
+#define DDR_PHY_ACIOCR0_ACPDRMODE_DEFVAL                                           0x30000000
+#define DDR_PHY_ACIOCR0_ACPDRMODE_SHIFT                                            4
+#define DDR_PHY_ACIOCR0_ACPDRMODE_MASK                                             0x00000030U
+
+/*AC On-die Termination Mode*/
+#undef DDR_PHY_ACIOCR0_ACODTMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACODTMODE_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACODTMODE_MASK 
+#define DDR_PHY_ACIOCR0_ACODTMODE_DEFVAL                                           0x30000000
+#define DDR_PHY_ACIOCR0_ACODTMODE_SHIFT                                            2
+#define DDR_PHY_ACIOCR0_ACODTMODE_MASK                                             0x0000000CU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR0_RESERVED_1_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RESERVED_1_SHIFT 
+#undef DDR_PHY_ACIOCR0_RESERVED_1_MASK 
+#define DDR_PHY_ACIOCR0_RESERVED_1_DEFVAL                                          0x30000000
+#define DDR_PHY_ACIOCR0_RESERVED_1_SHIFT                                           1
+#define DDR_PHY_ACIOCR0_RESERVED_1_MASK                                            0x00000002U
+
+/*Control delayed or non-delayed clock to CS_N/ODT?CKE AC slices.*/
+#undef DDR_PHY_ACIOCR0_ACRANKCLKSEL_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACRANKCLKSEL_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACRANKCLKSEL_MASK 
+#define DDR_PHY_ACIOCR0_ACRANKCLKSEL_DEFVAL                                        0x30000000
+#define DDR_PHY_ACIOCR0_ACRANKCLKSEL_SHIFT                                         0
+#define DDR_PHY_ACIOCR0_ACRANKCLKSEL_MASK                                          0x00000001U
+
+/*Clock gating for glue logic inside CLKGEN and glue logic inside CONTROL slice*/
+#undef DDR_PHY_ACIOCR2_CLKGENCLKGATE_DEFVAL 
+#undef DDR_PHY_ACIOCR2_CLKGENCLKGATE_SHIFT 
+#undef DDR_PHY_ACIOCR2_CLKGENCLKGATE_MASK 
+#define DDR_PHY_ACIOCR2_CLKGENCLKGATE_DEFVAL                                       0x00000000
+#define DDR_PHY_ACIOCR2_CLKGENCLKGATE_SHIFT                                        31
+#define DDR_PHY_ACIOCR2_CLKGENCLKGATE_MASK                                         0x80000000U
+
+/*Clock gating for Output Enable D slices [0]*/
+#undef DDR_PHY_ACIOCR2_ACOECLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACOECLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACOECLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACOECLKGATE0_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR2_ACOECLKGATE0_SHIFT                                         30
+#define DDR_PHY_ACIOCR2_ACOECLKGATE0_MASK                                          0x40000000U
+
+/*Clock gating for Power Down Receiver D slices [0]*/
+#undef DDR_PHY_ACIOCR2_ACPDRCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACPDRCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACPDRCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACPDRCLKGATE0_DEFVAL                                       0x00000000
+#define DDR_PHY_ACIOCR2_ACPDRCLKGATE0_SHIFT                                        29
+#define DDR_PHY_ACIOCR2_ACPDRCLKGATE0_MASK                                         0x20000000U
+
+/*Clock gating for Termination Enable D slices [0]*/
+#undef DDR_PHY_ACIOCR2_ACTECLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACTECLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACTECLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACTECLKGATE0_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR2_ACTECLKGATE0_SHIFT                                         28
+#define DDR_PHY_ACIOCR2_ACTECLKGATE0_MASK                                          0x10000000U
+
+/*Clock gating for CK# D slices [1:0]*/
+#undef DDR_PHY_ACIOCR2_CKNCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_CKNCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_CKNCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_CKNCLKGATE0_DEFVAL                                         0x00000000
+#define DDR_PHY_ACIOCR2_CKNCLKGATE0_SHIFT                                          26
+#define DDR_PHY_ACIOCR2_CKNCLKGATE0_MASK                                           0x0C000000U
+
+/*Clock gating for CK D slices [1:0]*/
+#undef DDR_PHY_ACIOCR2_CKCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_CKCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_CKCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_CKCLKGATE0_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR2_CKCLKGATE0_SHIFT                                           24
+#define DDR_PHY_ACIOCR2_CKCLKGATE0_MASK                                            0x03000000U
+
+/*Clock gating for AC D slices [23:0]*/
+#undef DDR_PHY_ACIOCR2_ACCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACCLKGATE0_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR2_ACCLKGATE0_SHIFT                                           0
+#define DDR_PHY_ACIOCR2_ACCLKGATE0_MASK                                            0x00FFFFFFU
+
+/*SDRAM Parity Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_PAROEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_PAROEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_PAROEMODE_MASK 
+#define DDR_PHY_ACIOCR3_PAROEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_PAROEMODE_SHIFT                                            30
+#define DDR_PHY_ACIOCR3_PAROEMODE_MASK                                             0xC0000000U
+
+/*SDRAM Bank Group Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_BGOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_BGOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_BGOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_BGOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_ACIOCR3_BGOEMODE_SHIFT                                             26
+#define DDR_PHY_ACIOCR3_BGOEMODE_MASK                                              0x3C000000U
+
+/*SDRAM Bank Address Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_BAOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_BAOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_BAOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_BAOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_ACIOCR3_BAOEMODE_SHIFT                                             22
+#define DDR_PHY_ACIOCR3_BAOEMODE_MASK                                              0x03C00000U
+
+/*SDRAM A[17] Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_A17OEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_A17OEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_A17OEMODE_MASK 
+#define DDR_PHY_ACIOCR3_A17OEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_A17OEMODE_SHIFT                                            20
+#define DDR_PHY_ACIOCR3_A17OEMODE_MASK                                             0x00300000U
+
+/*SDRAM A[16] / RAS_n Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_A16OEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_A16OEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_A16OEMODE_MASK 
+#define DDR_PHY_ACIOCR3_A16OEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_A16OEMODE_SHIFT                                            18
+#define DDR_PHY_ACIOCR3_A16OEMODE_MASK                                             0x000C0000U
+
+/*SDRAM ACT_n Output Enable (OE) Mode Selection (DDR4 only)*/
+#undef DDR_PHY_ACIOCR3_ACTOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_ACTOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_ACTOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_ACTOEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_ACTOEMODE_SHIFT                                            16
+#define DDR_PHY_ACIOCR3_ACTOEMODE_MASK                                             0x00030000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR3_RESERVED_15_8_DEFVAL 
+#undef DDR_PHY_ACIOCR3_RESERVED_15_8_SHIFT 
+#undef DDR_PHY_ACIOCR3_RESERVED_15_8_MASK 
+#define DDR_PHY_ACIOCR3_RESERVED_15_8_DEFVAL                                       0x00000005
+#define DDR_PHY_ACIOCR3_RESERVED_15_8_SHIFT                                        8
+#define DDR_PHY_ACIOCR3_RESERVED_15_8_MASK                                         0x0000FF00U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ACIOCR3_CKOEMODE_RSVD_DEFVAL 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_RSVD_SHIFT 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_RSVD_MASK 
+#define DDR_PHY_ACIOCR3_CKOEMODE_RSVD_DEFVAL                                       0x00000005
+#define DDR_PHY_ACIOCR3_CKOEMODE_RSVD_SHIFT                                        4
+#define DDR_PHY_ACIOCR3_CKOEMODE_RSVD_MASK                                         0x000000F0U
+
+/*SDRAM CK Output Enable (OE) Mode Selection.*/
+#undef DDR_PHY_ACIOCR3_CKOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_CKOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_ACIOCR3_CKOEMODE_SHIFT                                             0
+#define DDR_PHY_ACIOCR3_CKOEMODE_MASK                                              0x0000000FU
+
+/*Clock gating for AC LB slices and loopback read valid slices*/
+#undef DDR_PHY_ACIOCR4_LBCLKGATE_DEFVAL 
+#undef DDR_PHY_ACIOCR4_LBCLKGATE_SHIFT 
+#undef DDR_PHY_ACIOCR4_LBCLKGATE_MASK 
+#define DDR_PHY_ACIOCR4_LBCLKGATE_DEFVAL                                           0x00000000
+#define DDR_PHY_ACIOCR4_LBCLKGATE_SHIFT                                            31
+#define DDR_PHY_ACIOCR4_LBCLKGATE_MASK                                             0x80000000U
+
+/*Clock gating for Output Enable D slices [1]*/
+#undef DDR_PHY_ACIOCR4_ACOECLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACOECLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACOECLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACOECLKGATE1_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR4_ACOECLKGATE1_SHIFT                                         30
+#define DDR_PHY_ACIOCR4_ACOECLKGATE1_MASK                                          0x40000000U
+
+/*Clock gating for Power Down Receiver D slices [1]*/
+#undef DDR_PHY_ACIOCR4_ACPDRCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACPDRCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACPDRCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACPDRCLKGATE1_DEFVAL                                       0x00000000
+#define DDR_PHY_ACIOCR4_ACPDRCLKGATE1_SHIFT                                        29
+#define DDR_PHY_ACIOCR4_ACPDRCLKGATE1_MASK                                         0x20000000U
+
+/*Clock gating for Termination Enable D slices [1]*/
+#undef DDR_PHY_ACIOCR4_ACTECLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACTECLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACTECLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACTECLKGATE1_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR4_ACTECLKGATE1_SHIFT                                         28
+#define DDR_PHY_ACIOCR4_ACTECLKGATE1_MASK                                          0x10000000U
+
+/*Clock gating for CK# D slices [3:2]*/
+#undef DDR_PHY_ACIOCR4_CKNCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_CKNCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_CKNCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_CKNCLKGATE1_DEFVAL                                         0x00000000
+#define DDR_PHY_ACIOCR4_CKNCLKGATE1_SHIFT                                          26
+#define DDR_PHY_ACIOCR4_CKNCLKGATE1_MASK                                           0x0C000000U
+
+/*Clock gating for CK D slices [3:2]*/
+#undef DDR_PHY_ACIOCR4_CKCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_CKCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_CKCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_CKCLKGATE1_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR4_CKCLKGATE1_SHIFT                                           24
+#define DDR_PHY_ACIOCR4_CKCLKGATE1_MASK                                            0x03000000U
+
+/*Clock gating for AC D slices [47:24]*/
+#undef DDR_PHY_ACIOCR4_ACCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACCLKGATE1_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR4_ACCLKGATE1_SHIFT                                           0
+#define DDR_PHY_ACIOCR4_ACCLKGATE1_MASK                                            0x00FFFFFFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_IOVCR0_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_IOVCR0_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_IOVCR0_RESERVED_31_29_MASK 
+#define DDR_PHY_IOVCR0_RESERVED_31_29_DEFVAL                                       0x0F000000
+#define DDR_PHY_IOVCR0_RESERVED_31_29_SHIFT                                        29
+#define DDR_PHY_IOVCR0_RESERVED_31_29_MASK                                         0xE0000000U
+
+/*Address/command lane VREF Pad Enable*/
+#undef DDR_PHY_IOVCR0_ACREFPEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFPEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFPEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFPEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFPEN_SHIFT                                              28
+#define DDR_PHY_IOVCR0_ACREFPEN_MASK                                               0x10000000U
+
+/*Address/command lane Internal VREF Enable*/
+#undef DDR_PHY_IOVCR0_ACREFEEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFEEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFEEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFEEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFEEN_SHIFT                                              26
+#define DDR_PHY_IOVCR0_ACREFEEN_MASK                                               0x0C000000U
+
+/*Address/command lane Single-End VREF Enable*/
+#undef DDR_PHY_IOVCR0_ACREFSEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFSEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFSEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFSEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFSEN_SHIFT                                              25
+#define DDR_PHY_IOVCR0_ACREFSEN_MASK                                               0x02000000U
+
+/*Address/command lane Internal VREF Enable*/
+#undef DDR_PHY_IOVCR0_ACREFIEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFIEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFIEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFIEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFIEN_SHIFT                                              24
+#define DDR_PHY_IOVCR0_ACREFIEN_MASK                                               0x01000000U
+
+/*External VREF generato REFSEL range select*/
+#undef DDR_PHY_IOVCR0_ACREFESELRANGE_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFESELRANGE_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFESELRANGE_MASK 
+#define DDR_PHY_IOVCR0_ACREFESELRANGE_DEFVAL                                       0x0F000000
+#define DDR_PHY_IOVCR0_ACREFESELRANGE_SHIFT                                        23
+#define DDR_PHY_IOVCR0_ACREFESELRANGE_MASK                                         0x00800000U
+
+/*Address/command lane External VREF Select*/
+#undef DDR_PHY_IOVCR0_ACREFESEL_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFESEL_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFESEL_MASK 
+#define DDR_PHY_IOVCR0_ACREFESEL_DEFVAL                                            0x0F000000
+#define DDR_PHY_IOVCR0_ACREFESEL_SHIFT                                             16
+#define DDR_PHY_IOVCR0_ACREFESEL_MASK                                              0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_IOVCR0_ACREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFSSELRANGE_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFSSELRANGE_MASK 
+#define DDR_PHY_IOVCR0_ACREFSSELRANGE_DEFVAL                                       0x0F000000
+#define DDR_PHY_IOVCR0_ACREFSSELRANGE_SHIFT                                        15
+#define DDR_PHY_IOVCR0_ACREFSSELRANGE_MASK                                         0x00008000U
+
+/*Address/command lane Single-End VREF Select*/
+#undef DDR_PHY_IOVCR0_ACREFSSEL_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFSSEL_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFSSEL_MASK 
+#define DDR_PHY_IOVCR0_ACREFSSEL_DEFVAL                                            0x0F000000
+#define DDR_PHY_IOVCR0_ACREFSSEL_SHIFT                                             8
+#define DDR_PHY_IOVCR0_ACREFSSEL_MASK                                              0x00007F00U
+
+/*Internal VREF generator REFSEL ragne select*/
+#undef DDR_PHY_IOVCR0_ACVREFISELRANGE_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACVREFISELRANGE_SHIFT 
+#undef DDR_PHY_IOVCR0_ACVREFISELRANGE_MASK 
+#define DDR_PHY_IOVCR0_ACVREFISELRANGE_DEFVAL                                      0x0F000000
+#define DDR_PHY_IOVCR0_ACVREFISELRANGE_SHIFT                                       7
+#define DDR_PHY_IOVCR0_ACVREFISELRANGE_MASK                                        0x00000080U
+
+/*REFSEL Control for internal AC IOs*/
+#undef DDR_PHY_IOVCR0_ACVREFISEL_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACVREFISEL_SHIFT 
+#undef DDR_PHY_IOVCR0_ACVREFISEL_MASK 
+#define DDR_PHY_IOVCR0_ACVREFISEL_DEFVAL                                           0x0F000000
+#define DDR_PHY_IOVCR0_ACVREFISEL_SHIFT                                            0
+#define DDR_PHY_IOVCR0_ACVREFISEL_MASK                                             0x0000007FU
+
+/*Number of ctl_clk required to meet (> 150ns) timing requirements during DRAM DQ VREF training*/
+#undef DDR_PHY_VTCR0_TVREF_DEFVAL 
+#undef DDR_PHY_VTCR0_TVREF_SHIFT 
+#undef DDR_PHY_VTCR0_TVREF_MASK 
+#define DDR_PHY_VTCR0_TVREF_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_TVREF_SHIFT                                                  29
+#define DDR_PHY_VTCR0_TVREF_MASK                                                   0xE0000000U
+
+/*DRM DQ VREF training Enable*/
+#undef DDR_PHY_VTCR0_DVEN_DEFVAL 
+#undef DDR_PHY_VTCR0_DVEN_SHIFT 
+#undef DDR_PHY_VTCR0_DVEN_MASK 
+#define DDR_PHY_VTCR0_DVEN_DEFVAL                                                  0x70032019
+#define DDR_PHY_VTCR0_DVEN_SHIFT                                                   28
+#define DDR_PHY_VTCR0_DVEN_MASK                                                    0x10000000U
+
+/*Per Device Addressability Enable*/
+#undef DDR_PHY_VTCR0_PDAEN_DEFVAL 
+#undef DDR_PHY_VTCR0_PDAEN_SHIFT 
+#undef DDR_PHY_VTCR0_PDAEN_MASK 
+#define DDR_PHY_VTCR0_PDAEN_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_PDAEN_SHIFT                                                  27
+#define DDR_PHY_VTCR0_PDAEN_MASK                                                   0x08000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR0_RESERVED_26_DEFVAL 
+#undef DDR_PHY_VTCR0_RESERVED_26_SHIFT 
+#undef DDR_PHY_VTCR0_RESERVED_26_MASK 
+#define DDR_PHY_VTCR0_RESERVED_26_DEFVAL                                           0x70032019
+#define DDR_PHY_VTCR0_RESERVED_26_SHIFT                                            26
+#define DDR_PHY_VTCR0_RESERVED_26_MASK                                             0x04000000U
+
+/*VREF Word Count*/
+#undef DDR_PHY_VTCR0_VWCR_DEFVAL 
+#undef DDR_PHY_VTCR0_VWCR_SHIFT 
+#undef DDR_PHY_VTCR0_VWCR_MASK 
+#define DDR_PHY_VTCR0_VWCR_DEFVAL                                                  0x70032019
+#define DDR_PHY_VTCR0_VWCR_SHIFT                                                   22
+#define DDR_PHY_VTCR0_VWCR_MASK                                                    0x03C00000U
+
+/*DRAM DQ VREF step size used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVSS_DEFVAL 
+#undef DDR_PHY_VTCR0_DVSS_SHIFT 
+#undef DDR_PHY_VTCR0_DVSS_MASK 
+#define DDR_PHY_VTCR0_DVSS_DEFVAL                                                  0x70032019
+#define DDR_PHY_VTCR0_DVSS_SHIFT                                                   18
+#define DDR_PHY_VTCR0_DVSS_MASK                                                    0x003C0000U
+
+/*Maximum VREF limit value used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVMAX_DEFVAL 
+#undef DDR_PHY_VTCR0_DVMAX_SHIFT 
+#undef DDR_PHY_VTCR0_DVMAX_MASK 
+#define DDR_PHY_VTCR0_DVMAX_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_DVMAX_SHIFT                                                  12
+#define DDR_PHY_VTCR0_DVMAX_MASK                                                   0x0003F000U
+
+/*Minimum VREF limit value used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVMIN_DEFVAL 
+#undef DDR_PHY_VTCR0_DVMIN_SHIFT 
+#undef DDR_PHY_VTCR0_DVMIN_MASK 
+#define DDR_PHY_VTCR0_DVMIN_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_DVMIN_SHIFT                                                  6
+#define DDR_PHY_VTCR0_DVMIN_MASK                                                   0x00000FC0U
+
+/*Initial DRAM DQ VREF value used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVINIT_DEFVAL 
+#undef DDR_PHY_VTCR0_DVINIT_SHIFT 
+#undef DDR_PHY_VTCR0_DVINIT_MASK 
+#define DDR_PHY_VTCR0_DVINIT_DEFVAL                                                0x70032019
+#define DDR_PHY_VTCR0_DVINIT_SHIFT                                                 0
+#define DDR_PHY_VTCR0_DVINIT_MASK                                                  0x0000003FU
+
+/*Host VREF step size used during VREF training. The register value of N indicates step size of (N+1)*/
+#undef DDR_PHY_VTCR1_HVSS_DEFVAL 
+#undef DDR_PHY_VTCR1_HVSS_SHIFT 
+#undef DDR_PHY_VTCR1_HVSS_MASK 
+#define DDR_PHY_VTCR1_HVSS_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_HVSS_SHIFT                                                   28
+#define DDR_PHY_VTCR1_HVSS_MASK                                                    0xF0000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR1_RESERVED_27_DEFVAL 
+#undef DDR_PHY_VTCR1_RESERVED_27_SHIFT 
+#undef DDR_PHY_VTCR1_RESERVED_27_MASK 
+#define DDR_PHY_VTCR1_RESERVED_27_DEFVAL                                           0x07F00072
+#define DDR_PHY_VTCR1_RESERVED_27_SHIFT                                            27
+#define DDR_PHY_VTCR1_RESERVED_27_MASK                                             0x08000000U
+
+/*Maximum VREF limit value used during DRAM VREF training.*/
+#undef DDR_PHY_VTCR1_HVMAX_DEFVAL 
+#undef DDR_PHY_VTCR1_HVMAX_SHIFT 
+#undef DDR_PHY_VTCR1_HVMAX_MASK 
+#define DDR_PHY_VTCR1_HVMAX_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_HVMAX_SHIFT                                                  20
+#define DDR_PHY_VTCR1_HVMAX_MASK                                                   0x07F00000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR1_RESERVED_19_DEFVAL 
+#undef DDR_PHY_VTCR1_RESERVED_19_SHIFT 
+#undef DDR_PHY_VTCR1_RESERVED_19_MASK 
+#define DDR_PHY_VTCR1_RESERVED_19_DEFVAL                                           0x07F00072
+#define DDR_PHY_VTCR1_RESERVED_19_SHIFT                                            19
+#define DDR_PHY_VTCR1_RESERVED_19_MASK                                             0x00080000U
+
+/*Minimum VREF limit value used during DRAM VREF training.*/
+#undef DDR_PHY_VTCR1_HVMIN_DEFVAL 
+#undef DDR_PHY_VTCR1_HVMIN_SHIFT 
+#undef DDR_PHY_VTCR1_HVMIN_MASK 
+#define DDR_PHY_VTCR1_HVMIN_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_HVMIN_SHIFT                                                  12
+#define DDR_PHY_VTCR1_HVMIN_MASK                                                   0x0007F000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR1_RESERVED_11_DEFVAL 
+#undef DDR_PHY_VTCR1_RESERVED_11_SHIFT 
+#undef DDR_PHY_VTCR1_RESERVED_11_MASK 
+#define DDR_PHY_VTCR1_RESERVED_11_DEFVAL                                           0x07F00072
+#define DDR_PHY_VTCR1_RESERVED_11_SHIFT                                            11
+#define DDR_PHY_VTCR1_RESERVED_11_MASK                                             0x00000800U
+
+/*Static Host Vref Rank Value*/
+#undef DDR_PHY_VTCR1_SHRNK_DEFVAL 
+#undef DDR_PHY_VTCR1_SHRNK_SHIFT 
+#undef DDR_PHY_VTCR1_SHRNK_MASK 
+#define DDR_PHY_VTCR1_SHRNK_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_SHRNK_SHIFT                                                  9
+#define DDR_PHY_VTCR1_SHRNK_MASK                                                   0x00000600U
+
+/*Static Host Vref Rank Enable*/
+#undef DDR_PHY_VTCR1_SHREN_DEFVAL 
+#undef DDR_PHY_VTCR1_SHREN_SHIFT 
+#undef DDR_PHY_VTCR1_SHREN_MASK 
+#define DDR_PHY_VTCR1_SHREN_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_SHREN_SHIFT                                                  8
+#define DDR_PHY_VTCR1_SHREN_MASK                                                   0x00000100U
+
+/*Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training*/
+#undef DDR_PHY_VTCR1_TVREFIO_DEFVAL 
+#undef DDR_PHY_VTCR1_TVREFIO_SHIFT 
+#undef DDR_PHY_VTCR1_TVREFIO_MASK 
+#define DDR_PHY_VTCR1_TVREFIO_DEFVAL                                               0x07F00072
+#define DDR_PHY_VTCR1_TVREFIO_SHIFT                                                5
+#define DDR_PHY_VTCR1_TVREFIO_MASK                                                 0x000000E0U
+
+/*Eye LCDL Offset value for VREF training*/
+#undef DDR_PHY_VTCR1_EOFF_DEFVAL 
+#undef DDR_PHY_VTCR1_EOFF_SHIFT 
+#undef DDR_PHY_VTCR1_EOFF_MASK 
+#define DDR_PHY_VTCR1_EOFF_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_EOFF_SHIFT                                                   3
+#define DDR_PHY_VTCR1_EOFF_MASK                                                    0x00000018U
+
+/*Number of LCDL Eye points for which VREF training is repeated*/
+#undef DDR_PHY_VTCR1_ENUM_DEFVAL 
+#undef DDR_PHY_VTCR1_ENUM_SHIFT 
+#undef DDR_PHY_VTCR1_ENUM_MASK 
+#define DDR_PHY_VTCR1_ENUM_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_ENUM_SHIFT                                                   2
+#define DDR_PHY_VTCR1_ENUM_MASK                                                    0x00000004U
+
+/*HOST (IO) internal VREF training Enable*/
+#undef DDR_PHY_VTCR1_HVEN_DEFVAL 
+#undef DDR_PHY_VTCR1_HVEN_SHIFT 
+#undef DDR_PHY_VTCR1_HVEN_MASK 
+#define DDR_PHY_VTCR1_HVEN_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_HVEN_SHIFT                                                   1
+#define DDR_PHY_VTCR1_HVEN_MASK                                                    0x00000002U
+
+/*Host IO Type Control*/
+#undef DDR_PHY_VTCR1_HVIO_DEFVAL 
+#undef DDR_PHY_VTCR1_HVIO_SHIFT 
+#undef DDR_PHY_VTCR1_HVIO_MASK 
+#define DDR_PHY_VTCR1_HVIO_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_HVIO_SHIFT                                                   0
+#define DDR_PHY_VTCR1_HVIO_MASK                                                    0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_31_30_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_31_30_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_ACBDLR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*Delay select for the BDL on Address A[3].*/
+#undef DDR_PHY_ACBDLR6_A03BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A03BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A03BD_MASK 
+#define DDR_PHY_ACBDLR6_A03BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A03BD_SHIFT                                                24
+#define DDR_PHY_ACBDLR6_A03BD_MASK                                                 0x3F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_23_22_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_23_22_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_ACBDLR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*Delay select for the BDL on Address A[2].*/
+#undef DDR_PHY_ACBDLR6_A02BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A02BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A02BD_MASK 
+#define DDR_PHY_ACBDLR6_A02BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A02BD_SHIFT                                                16
+#define DDR_PHY_ACBDLR6_A02BD_MASK                                                 0x003F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_15_14_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_15_14_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_ACBDLR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*Delay select for the BDL on Address A[1].*/
+#undef DDR_PHY_ACBDLR6_A01BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A01BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A01BD_MASK 
+#define DDR_PHY_ACBDLR6_A01BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A01BD_SHIFT                                                8
+#define DDR_PHY_ACBDLR6_A01BD_MASK                                                 0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_7_6_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_7_6_DEFVAL                                        0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_ACBDLR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*Delay select for the BDL on Address A[0].*/
+#undef DDR_PHY_ACBDLR6_A00BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A00BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A00BD_MASK 
+#define DDR_PHY_ACBDLR6_A00BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A00BD_SHIFT                                                0
+#define DDR_PHY_ACBDLR6_A00BD_MASK                                                 0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_31_30_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_31_30_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_ACBDLR7_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*Delay select for the BDL on Address A[7].*/
+#undef DDR_PHY_ACBDLR7_A07BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A07BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A07BD_MASK 
+#define DDR_PHY_ACBDLR7_A07BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A07BD_SHIFT                                                24
+#define DDR_PHY_ACBDLR7_A07BD_MASK                                                 0x3F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_23_22_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_23_22_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_ACBDLR7_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*Delay select for the BDL on Address A[6].*/
+#undef DDR_PHY_ACBDLR7_A06BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A06BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A06BD_MASK 
+#define DDR_PHY_ACBDLR7_A06BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A06BD_SHIFT                                                16
+#define DDR_PHY_ACBDLR7_A06BD_MASK                                                 0x003F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_15_14_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_15_14_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_ACBDLR7_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*Delay select for the BDL on Address A[5].*/
+#undef DDR_PHY_ACBDLR7_A05BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A05BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A05BD_MASK 
+#define DDR_PHY_ACBDLR7_A05BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A05BD_SHIFT                                                8
+#define DDR_PHY_ACBDLR7_A05BD_MASK                                                 0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_7_6_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_7_6_DEFVAL                                        0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_ACBDLR7_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*Delay select for the BDL on Address A[4].*/
+#undef DDR_PHY_ACBDLR7_A04BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A04BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A04BD_MASK 
+#define DDR_PHY_ACBDLR7_A04BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A04BD_SHIFT                                                0
+#define DDR_PHY_ACBDLR7_A04BD_MASK                                                 0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_31_30_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_31_30_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_ACBDLR8_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*Delay select for the BDL on Address A[11].*/
+#undef DDR_PHY_ACBDLR8_A11BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A11BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A11BD_MASK 
+#define DDR_PHY_ACBDLR8_A11BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A11BD_SHIFT                                                24
+#define DDR_PHY_ACBDLR8_A11BD_MASK                                                 0x3F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_23_22_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_23_22_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_ACBDLR8_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*Delay select for the BDL on Address A[10].*/
+#undef DDR_PHY_ACBDLR8_A10BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A10BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A10BD_MASK 
+#define DDR_PHY_ACBDLR8_A10BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A10BD_SHIFT                                                16
+#define DDR_PHY_ACBDLR8_A10BD_MASK                                                 0x003F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_15_14_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_15_14_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_ACBDLR8_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*Delay select for the BDL on Address A[9].*/
+#undef DDR_PHY_ACBDLR8_A09BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A09BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A09BD_MASK 
+#define DDR_PHY_ACBDLR8_A09BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A09BD_SHIFT                                                8
+#define DDR_PHY_ACBDLR8_A09BD_MASK                                                 0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_7_6_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_7_6_DEFVAL                                        0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_ACBDLR8_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*Delay select for the BDL on Address A[8].*/
+#undef DDR_PHY_ACBDLR8_A08BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A08BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A08BD_MASK 
+#define DDR_PHY_ACBDLR8_A08BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A08BD_SHIFT                                                0
+#define DDR_PHY_ACBDLR8_A08BD_MASK                                                 0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ZQCR_RESERVED_31_26_DEFVAL 
+#undef DDR_PHY_ZQCR_RESERVED_31_26_SHIFT 
+#undef DDR_PHY_ZQCR_RESERVED_31_26_MASK 
+#define DDR_PHY_ZQCR_RESERVED_31_26_DEFVAL                                         0x008A2858
+#define DDR_PHY_ZQCR_RESERVED_31_26_SHIFT                                          26
+#define DDR_PHY_ZQCR_RESERVED_31_26_MASK                                           0xFC000000U
+
+/*ZQ VREF Range*/
+#undef DDR_PHY_ZQCR_ZQREFISELRANGE_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQREFISELRANGE_SHIFT 
+#undef DDR_PHY_ZQCR_ZQREFISELRANGE_MASK 
+#define DDR_PHY_ZQCR_ZQREFISELRANGE_DEFVAL                                         0x008A2858
+#define DDR_PHY_ZQCR_ZQREFISELRANGE_SHIFT                                          25
+#define DDR_PHY_ZQCR_ZQREFISELRANGE_MASK                                           0x02000000U
+
+/*Programmable Wait for Frequency B*/
+#undef DDR_PHY_ZQCR_PGWAIT_FRQB_DEFVAL 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQB_SHIFT 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQB_MASK 
+#define DDR_PHY_ZQCR_PGWAIT_FRQB_DEFVAL                                            0x008A2858
+#define DDR_PHY_ZQCR_PGWAIT_FRQB_SHIFT                                             19
+#define DDR_PHY_ZQCR_PGWAIT_FRQB_MASK                                              0x01F80000U
+
+/*Programmable Wait for Frequency A*/
+#undef DDR_PHY_ZQCR_PGWAIT_FRQA_DEFVAL 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQA_SHIFT 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQA_MASK 
+#define DDR_PHY_ZQCR_PGWAIT_FRQA_DEFVAL                                            0x008A2858
+#define DDR_PHY_ZQCR_PGWAIT_FRQA_SHIFT                                             13
+#define DDR_PHY_ZQCR_PGWAIT_FRQA_MASK                                              0x0007E000U
+
+/*ZQ VREF Pad Enable*/
+#undef DDR_PHY_ZQCR_ZQREFPEN_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQREFPEN_SHIFT 
+#undef DDR_PHY_ZQCR_ZQREFPEN_MASK 
+#define DDR_PHY_ZQCR_ZQREFPEN_DEFVAL                                               0x008A2858
+#define DDR_PHY_ZQCR_ZQREFPEN_SHIFT                                                12
+#define DDR_PHY_ZQCR_ZQREFPEN_MASK                                                 0x00001000U
+
+/*ZQ Internal VREF Enable*/
+#undef DDR_PHY_ZQCR_ZQREFIEN_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQREFIEN_SHIFT 
+#undef DDR_PHY_ZQCR_ZQREFIEN_MASK 
+#define DDR_PHY_ZQCR_ZQREFIEN_DEFVAL                                               0x008A2858
+#define DDR_PHY_ZQCR_ZQREFIEN_SHIFT                                                11
+#define DDR_PHY_ZQCR_ZQREFIEN_MASK                                                 0x00000800U
+
+/*Choice of termination mode*/
+#undef DDR_PHY_ZQCR_ODT_MODE_DEFVAL 
+#undef DDR_PHY_ZQCR_ODT_MODE_SHIFT 
+#undef DDR_PHY_ZQCR_ODT_MODE_MASK 
+#define DDR_PHY_ZQCR_ODT_MODE_DEFVAL                                               0x008A2858
+#define DDR_PHY_ZQCR_ODT_MODE_SHIFT                                                9
+#define DDR_PHY_ZQCR_ODT_MODE_MASK                                                 0x00000600U
+
+/*Force ZCAL VT update*/
+#undef DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_DEFVAL 
+#undef DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_SHIFT 
+#undef DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_MASK 
+#define DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_DEFVAL                                   0x008A2858
+#define DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_SHIFT                                    8
+#define DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_MASK                                     0x00000100U
+
+/*IO VT Drift Limit*/
+#undef DDR_PHY_ZQCR_IODLMT_DEFVAL 
+#undef DDR_PHY_ZQCR_IODLMT_SHIFT 
+#undef DDR_PHY_ZQCR_IODLMT_MASK 
+#define DDR_PHY_ZQCR_IODLMT_DEFVAL                                                 0x008A2858
+#define DDR_PHY_ZQCR_IODLMT_SHIFT                                                  5
+#define DDR_PHY_ZQCR_IODLMT_MASK                                                   0x000000E0U
+
+/*Averaging algorithm enable, if set, enables averaging algorithm*/
+#undef DDR_PHY_ZQCR_AVGEN_DEFVAL 
+#undef DDR_PHY_ZQCR_AVGEN_SHIFT 
+#undef DDR_PHY_ZQCR_AVGEN_MASK 
+#define DDR_PHY_ZQCR_AVGEN_DEFVAL                                                  0x008A2858
+#define DDR_PHY_ZQCR_AVGEN_SHIFT                                                   4
+#define DDR_PHY_ZQCR_AVGEN_MASK                                                    0x00000010U
+
+/*Maximum number of averaging rounds to be used by averaging algorithm*/
+#undef DDR_PHY_ZQCR_AVGMAX_DEFVAL 
+#undef DDR_PHY_ZQCR_AVGMAX_SHIFT 
+#undef DDR_PHY_ZQCR_AVGMAX_MASK 
+#define DDR_PHY_ZQCR_AVGMAX_DEFVAL                                                 0x008A2858
+#define DDR_PHY_ZQCR_AVGMAX_SHIFT                                                  2
+#define DDR_PHY_ZQCR_AVGMAX_MASK                                                   0x0000000CU
+
+/*ZQ Calibration Type*/
+#undef DDR_PHY_ZQCR_ZCALT_DEFVAL 
+#undef DDR_PHY_ZQCR_ZCALT_SHIFT 
+#undef DDR_PHY_ZQCR_ZCALT_MASK 
+#define DDR_PHY_ZQCR_ZCALT_DEFVAL                                                  0x008A2858
+#define DDR_PHY_ZQCR_ZCALT_SHIFT                                                   1
+#define DDR_PHY_ZQCR_ZCALT_MASK                                                    0x00000002U
+
+/*ZQ Power Down*/
+#undef DDR_PHY_ZQCR_ZQPD_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQPD_SHIFT 
+#undef DDR_PHY_ZQCR_ZQPD_MASK 
+#define DDR_PHY_ZQCR_ZQPD_DEFVAL                                                   0x008A2858
+#define DDR_PHY_ZQCR_ZQPD_SHIFT                                                    0
+#define DDR_PHY_ZQCR_ZQPD_MASK                                                     0x00000001U
+
+/*Pull-down drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_SHIFT                                           31
+#define DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_MASK                                            0x80000000U
+
+/*Pull-up drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_SHIFT                                           30
+#define DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_MASK                                            0x40000000U
+
+/*Pull-down termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_SHIFT                                           29
+#define DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_MASK                                            0x20000000U
+
+/*Pull-up termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_SHIFT                                           28
+#define DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_MASK                                            0x10000000U
+
+/*Calibration segment bypass*/
+#undef DDR_PHY_ZQ0PR0_ZSEGBYP_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZSEGBYP_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZSEGBYP_MASK 
+#define DDR_PHY_ZQ0PR0_ZSEGBYP_DEFVAL                                              0x000077BB
+#define DDR_PHY_ZQ0PR0_ZSEGBYP_SHIFT                                               27
+#define DDR_PHY_ZQ0PR0_ZSEGBYP_MASK                                                0x08000000U
+
+/*VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB*/
+#undef DDR_PHY_ZQ0PR0_ZLE_MODE_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZLE_MODE_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZLE_MODE_MASK 
+#define DDR_PHY_ZQ0PR0_ZLE_MODE_DEFVAL                                             0x000077BB
+#define DDR_PHY_ZQ0PR0_ZLE_MODE_SHIFT                                              25
+#define DDR_PHY_ZQ0PR0_ZLE_MODE_MASK                                               0x06000000U
+
+/*Termination adjustment*/
+#undef DDR_PHY_ZQ0PR0_ODT_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ODT_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ODT_ADJUST_MASK 
+#define DDR_PHY_ZQ0PR0_ODT_ADJUST_DEFVAL                                           0x000077BB
+#define DDR_PHY_ZQ0PR0_ODT_ADJUST_SHIFT                                            22
+#define DDR_PHY_ZQ0PR0_ODT_ADJUST_MASK                                             0x01C00000U
+
+/*Pulldown drive strength adjustment*/
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_SHIFT                                         19
+#define DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_MASK                                          0x00380000U
+
+/*Pullup drive strength adjustment*/
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_SHIFT                                         16
+#define DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_MASK                                          0x00070000U
+
+/*DRAM Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_SHIFT                                        12
+#define DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_MASK                                         0x0000F000U
+
+/*HOST Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_SHIFT                                        8
+#define DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_MASK                                         0x00000F00U
+
+/*Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_SHIFT                                     4
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_MASK                                      0x000000F0U
+
+/*Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_SHIFT                                     0
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_MASK                                      0x0000000FU
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR0_RESERVED_31_26_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_RESERVED_31_26_SHIFT 
+#undef DDR_PHY_ZQ0OR0_RESERVED_31_26_MASK 
+#define DDR_PHY_ZQ0OR0_RESERVED_31_26_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR0_RESERVED_31_26_SHIFT                                        26
+#define DDR_PHY_ZQ0OR0_RESERVED_31_26_MASK                                         0xFC000000U
+
+/*Override value for the pull-up output impedance*/
+#undef DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_MASK 
+#define DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_SHIFT                                     16
+#define DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_MASK                                      0x03FF0000U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR0_RESERVED_15_10_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_RESERVED_15_10_SHIFT 
+#undef DDR_PHY_ZQ0OR0_RESERVED_15_10_MASK 
+#define DDR_PHY_ZQ0OR0_RESERVED_15_10_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR0_RESERVED_15_10_SHIFT                                        10
+#define DDR_PHY_ZQ0OR0_RESERVED_15_10_MASK                                         0x0000FC00U
+
+/*Override value for the pull-down output impedance*/
+#undef DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_MASK 
+#define DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_SHIFT                                     0
+#define DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_MASK                                      0x000003FFU
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR1_RESERVED_31_26_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_RESERVED_31_26_SHIFT 
+#undef DDR_PHY_ZQ0OR1_RESERVED_31_26_MASK 
+#define DDR_PHY_ZQ0OR1_RESERVED_31_26_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR1_RESERVED_31_26_SHIFT                                        26
+#define DDR_PHY_ZQ0OR1_RESERVED_31_26_MASK                                         0xFC000000U
+
+/*Override value for the pull-up termination*/
+#undef DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_MASK 
+#define DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_SHIFT                                     16
+#define DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_MASK                                      0x03FF0000U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR1_RESERVED_15_10_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_RESERVED_15_10_SHIFT 
+#undef DDR_PHY_ZQ0OR1_RESERVED_15_10_MASK 
+#define DDR_PHY_ZQ0OR1_RESERVED_15_10_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR1_RESERVED_15_10_SHIFT                                        10
+#define DDR_PHY_ZQ0OR1_RESERVED_15_10_MASK                                         0x0000FC00U
+
+/*Override value for the pull-down termination*/
+#undef DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_MASK 
+#define DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_SHIFT                                     0
+#define DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_MASK                                      0x000003FFU
+
+/*Pull-down drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_SHIFT                                           31
+#define DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_MASK                                            0x80000000U
+
+/*Pull-up drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_SHIFT                                           30
+#define DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_MASK                                            0x40000000U
+
+/*Pull-down termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_SHIFT                                           29
+#define DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_MASK                                            0x20000000U
+
+/*Pull-up termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_SHIFT                                           28
+#define DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_MASK                                            0x10000000U
+
+/*Calibration segment bypass*/
+#undef DDR_PHY_ZQ1PR0_ZSEGBYP_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZSEGBYP_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZSEGBYP_MASK 
+#define DDR_PHY_ZQ1PR0_ZSEGBYP_DEFVAL                                              0x000077BB
+#define DDR_PHY_ZQ1PR0_ZSEGBYP_SHIFT                                               27
+#define DDR_PHY_ZQ1PR0_ZSEGBYP_MASK                                                0x08000000U
+
+/*VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB*/
+#undef DDR_PHY_ZQ1PR0_ZLE_MODE_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZLE_MODE_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZLE_MODE_MASK 
+#define DDR_PHY_ZQ1PR0_ZLE_MODE_DEFVAL                                             0x000077BB
+#define DDR_PHY_ZQ1PR0_ZLE_MODE_SHIFT                                              25
+#define DDR_PHY_ZQ1PR0_ZLE_MODE_MASK                                               0x06000000U
+
+/*Termination adjustment*/
+#undef DDR_PHY_ZQ1PR0_ODT_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ODT_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ODT_ADJUST_MASK 
+#define DDR_PHY_ZQ1PR0_ODT_ADJUST_DEFVAL                                           0x000077BB
+#define DDR_PHY_ZQ1PR0_ODT_ADJUST_SHIFT                                            22
+#define DDR_PHY_ZQ1PR0_ODT_ADJUST_MASK                                             0x01C00000U
+
+/*Pulldown drive strength adjustment*/
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_SHIFT                                         19
+#define DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_MASK                                          0x00380000U
+
+/*Pullup drive strength adjustment*/
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_SHIFT                                         16
+#define DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_MASK                                          0x00070000U
+
+/*DRAM Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_SHIFT                                        12
+#define DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_MASK                                         0x0000F000U
+
+/*HOST Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_SHIFT                                        8
+#define DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_MASK                                         0x00000F00U
+
+/*Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_SHIFT                                     4
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_MASK                                      0x000000F0U
+
+/*Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_SHIFT                                     0
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_MASK                                      0x0000000FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX0GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX0GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX0GCR0_CALBYP_MASK 
+#define DDR_PHY_DX0GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX0GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX0GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX0GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX0GCR0_MDLEN_MASK 
+#define DDR_PHY_DX0GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX0GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX0GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX0GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX0GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX0GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX0GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX0GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX0GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX0GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX0GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX0GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX0GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX0GCR0_RDDLY_MASK 
+#define DDR_PHY_DX0GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX0GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX0GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX0GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX0GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX0GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX0GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX0GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX0GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX0GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX0GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX0GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX0GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX0GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX0GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX0GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX0GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX0GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX0GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX0GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX0GCR0_RTTOH_MASK 
+#define DDR_PHY_DX0GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX0GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX0GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX0GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX0GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX0GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX0GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX0GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX0GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX0GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX0GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX0GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX0GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX0GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX0GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX0GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX0GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX0GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX0GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX0GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX0GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX0GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX0GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX0GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX0GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX0GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX0GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX0GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX0GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX0GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX0GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX0GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX0GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX0GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX0GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX0GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX0GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX0GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX0GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX0GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX0GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX0GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX0GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX0GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX0GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX0GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX0GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX0GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX0GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX0GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX0GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX0GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX0GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX0GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX0GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX0GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX0GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX0GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX0GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX0GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX0GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX0GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX0GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX0GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX0GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX0GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX0GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX0GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX0GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX0GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX0GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX0GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX0GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX0GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX0GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX0GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX0GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX0GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX0GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX0GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX0GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX0GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX0GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX0GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX0GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX0GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX0LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX0LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX0LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX0LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX0LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX0LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX0LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX0LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX0LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX0LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX0LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX0LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX0LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX0LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX0GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX0GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX0GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX0GTR0_WDQSL_MASK 
+#define DDR_PHY_DX0GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX0GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX0GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX0GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX0GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX0GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX0GTR0_WLSL_MASK 
+#define DDR_PHY_DX0GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX0GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX0GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX0GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX0GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX0GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX0GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX0GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX0GTR0_DGSL_MASK 
+#define DDR_PHY_DX0GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX0GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX0GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX1GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX1GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX1GCR0_CALBYP_MASK 
+#define DDR_PHY_DX1GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX1GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX1GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX1GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX1GCR0_MDLEN_MASK 
+#define DDR_PHY_DX1GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX1GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX1GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX1GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX1GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX1GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX1GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX1GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX1GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX1GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX1GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX1GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX1GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX1GCR0_RDDLY_MASK 
+#define DDR_PHY_DX1GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX1GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX1GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX1GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX1GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX1GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX1GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX1GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX1GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX1GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX1GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX1GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX1GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX1GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX1GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX1GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX1GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX1GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX1GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX1GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX1GCR0_RTTOH_MASK 
+#define DDR_PHY_DX1GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX1GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX1GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX1GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX1GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX1GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX1GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX1GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX1GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX1GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX1GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX1GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX1GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX1GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX1GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX1GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX1GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX1GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX1GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX1GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX1GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX1GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX1GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX1GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX1GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX1GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX1GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX1GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX1GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX1GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX1GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX1GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX1GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX1GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX1GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX1GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX1GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX1GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX1GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX1GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX1GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX1GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX1GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX1GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX1GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX1GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX1GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX1GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX1GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX1GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX1GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX1GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX1GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX1GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX1GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX1GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX1GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX1GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX1GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX1GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX1GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX1GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX1GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX1GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX1GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX1GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX1GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX1GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX1GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX1GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX1GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX1GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX1GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX1GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX1GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX1GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX1GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX1GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX1GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX1GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX1GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX1GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX1GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX1GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX1GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX1GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX1LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX1LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX1LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX1LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX1LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX1LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX1LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX1LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX1LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX1LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX1LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX1LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX1LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX1LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX1GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX1GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX1GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX1GTR0_WDQSL_MASK 
+#define DDR_PHY_DX1GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX1GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX1GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX1GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX1GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX1GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX1GTR0_WLSL_MASK 
+#define DDR_PHY_DX1GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX1GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX1GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX1GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX1GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX1GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX1GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX1GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX1GTR0_DGSL_MASK 
+#define DDR_PHY_DX1GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX1GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX1GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX2GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX2GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX2GCR0_CALBYP_MASK 
+#define DDR_PHY_DX2GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX2GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX2GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX2GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX2GCR0_MDLEN_MASK 
+#define DDR_PHY_DX2GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX2GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX2GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX2GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX2GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX2GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX2GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX2GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX2GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX2GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX2GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX2GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX2GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX2GCR0_RDDLY_MASK 
+#define DDR_PHY_DX2GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX2GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX2GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX2GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX2GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX2GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX2GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX2GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX2GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX2GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX2GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX2GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX2GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX2GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX2GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX2GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX2GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX2GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX2GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX2GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX2GCR0_RTTOH_MASK 
+#define DDR_PHY_DX2GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX2GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX2GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX2GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX2GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX2GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX2GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX2GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX2GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX2GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX2GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX2GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX2GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX2GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX2GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX2GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX2GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX2GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX2GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX2GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX2GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX2GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX2GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX2GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX2GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX2GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX2GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX2GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX2GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX2GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX2GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX2GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX2GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX2GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX2GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX2GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX2GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX2GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX2GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX2GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX2GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX2GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX2GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX2GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX2GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX2GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX2GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX2GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX2GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX2GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX2GCR1_QSSEL_MASK 
+#define DDR_PHY_DX2GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX2GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX2GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX2GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_OEEN_MASK 
+#define DDR_PHY_DX2GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX2GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX2GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX2GCR1_PDREN_MASK 
+#define DDR_PHY_DX2GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX2GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX2GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX2GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_TEEN_MASK 
+#define DDR_PHY_DX2GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX2GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX2GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_DSEN_MASK 
+#define DDR_PHY_DX2GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX2GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX2GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_DMEN_MASK 
+#define DDR_PHY_DX2GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX2GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX2GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_DQEN_MASK 
+#define DDR_PHY_DX2GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX2GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX2GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX2GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX2GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX2GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX2GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX2GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX2GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX2GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX2GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX2GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX2GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX2GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX2GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX2GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX2GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX2GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX2GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX2GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX2GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX2GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX2GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX2GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX2GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX2GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX2GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX2GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX2GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX2GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX2GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX2GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX2GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX2GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX2GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX2GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX2GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX2GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX2GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX2GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX2GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX2GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX2GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX2GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX2GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX2GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX2GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX2GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX2GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX2GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX2GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX2GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX2GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX2GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX2GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX2GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX2GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX2LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX2LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX2LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX2LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX2LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX2LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX2LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX2LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX2LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX2LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX2LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX2LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX2LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX2LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX2GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX2GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX2GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX2GTR0_WDQSL_MASK 
+#define DDR_PHY_DX2GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX2GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX2GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX2GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX2GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX2GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX2GTR0_WLSL_MASK 
+#define DDR_PHY_DX2GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX2GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX2GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX2GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX2GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX2GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX2GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX2GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX2GTR0_DGSL_MASK 
+#define DDR_PHY_DX2GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX2GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX2GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX3GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX3GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX3GCR0_CALBYP_MASK 
+#define DDR_PHY_DX3GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX3GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX3GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX3GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX3GCR0_MDLEN_MASK 
+#define DDR_PHY_DX3GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX3GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX3GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX3GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX3GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX3GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX3GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX3GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX3GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX3GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX3GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX3GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX3GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX3GCR0_RDDLY_MASK 
+#define DDR_PHY_DX3GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX3GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX3GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX3GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX3GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX3GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX3GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX3GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX3GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX3GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX3GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX3GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX3GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX3GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX3GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX3GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX3GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX3GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX3GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX3GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX3GCR0_RTTOH_MASK 
+#define DDR_PHY_DX3GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX3GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX3GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX3GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX3GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX3GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX3GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX3GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX3GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX3GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX3GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX3GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX3GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX3GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX3GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX3GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX3GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX3GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX3GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX3GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX3GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX3GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX3GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX3GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX3GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX3GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX3GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX3GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX3GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX3GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX3GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX3GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX3GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX3GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX3GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX3GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX3GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX3GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX3GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX3GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX3GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX3GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX3GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX3GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX3GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX3GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX3GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX3GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX3GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX3GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX3GCR1_QSSEL_MASK 
+#define DDR_PHY_DX3GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX3GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX3GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX3GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_OEEN_MASK 
+#define DDR_PHY_DX3GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX3GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX3GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX3GCR1_PDREN_MASK 
+#define DDR_PHY_DX3GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX3GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX3GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX3GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_TEEN_MASK 
+#define DDR_PHY_DX3GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX3GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX3GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_DSEN_MASK 
+#define DDR_PHY_DX3GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX3GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX3GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_DMEN_MASK 
+#define DDR_PHY_DX3GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX3GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX3GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_DQEN_MASK 
+#define DDR_PHY_DX3GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX3GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX3GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX3GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX3GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX3GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX3GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX3GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX3GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX3GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX3GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX3GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX3GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX3GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX3GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX3GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX3GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX3GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX3GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX3GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX3GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX3GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX3GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX3GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX3GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX3GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX3GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX3GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX3GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX3GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX3GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX3GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX3GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX3GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX3GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX3GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX3GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX3GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX3GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX3GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX3GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX3GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX3GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX3GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX3GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX3GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX3GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX3GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX3GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX3GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX3GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX3GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX3GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX3GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX3GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX3GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX3GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX3LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX3LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX3LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX3LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX3LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX3LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX3LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX3LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX3LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX3LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX3LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX3LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX3LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX3LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX3GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX3GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX3GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX3GTR0_WDQSL_MASK 
+#define DDR_PHY_DX3GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX3GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX3GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX3GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX3GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX3GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX3GTR0_WLSL_MASK 
+#define DDR_PHY_DX3GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX3GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX3GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX3GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX3GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX3GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX3GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX3GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX3GTR0_DGSL_MASK 
+#define DDR_PHY_DX3GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX3GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX3GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX4GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX4GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX4GCR0_CALBYP_MASK 
+#define DDR_PHY_DX4GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX4GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX4GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX4GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX4GCR0_MDLEN_MASK 
+#define DDR_PHY_DX4GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX4GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX4GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX4GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX4GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX4GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX4GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX4GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX4GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX4GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX4GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX4GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX4GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX4GCR0_RDDLY_MASK 
+#define DDR_PHY_DX4GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX4GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX4GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX4GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX4GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX4GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX4GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX4GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX4GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX4GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX4GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX4GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX4GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX4GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX4GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX4GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX4GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX4GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX4GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX4GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX4GCR0_RTTOH_MASK 
+#define DDR_PHY_DX4GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX4GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX4GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX4GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX4GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX4GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX4GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX4GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX4GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX4GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX4GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX4GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX4GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX4GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX4GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX4GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX4GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX4GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX4GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX4GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX4GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX4GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX4GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX4GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX4GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX4GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX4GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX4GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX4GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX4GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX4GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX4GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX4GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX4GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX4GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX4GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX4GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX4GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX4GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX4GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX4GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX4GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX4GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX4GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX4GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX4GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX4GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX4GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX4GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX4GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX4GCR1_QSSEL_MASK 
+#define DDR_PHY_DX4GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX4GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX4GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX4GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_OEEN_MASK 
+#define DDR_PHY_DX4GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX4GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX4GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX4GCR1_PDREN_MASK 
+#define DDR_PHY_DX4GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX4GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX4GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX4GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_TEEN_MASK 
+#define DDR_PHY_DX4GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX4GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX4GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_DSEN_MASK 
+#define DDR_PHY_DX4GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX4GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX4GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_DMEN_MASK 
+#define DDR_PHY_DX4GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX4GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX4GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_DQEN_MASK 
+#define DDR_PHY_DX4GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX4GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX4GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX4GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX4GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX4GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX4GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX4GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX4GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX4GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX4GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX4GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX4GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX4GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX4GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX4GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX4GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX4GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX4GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX4GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX4GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX4GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX4GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX4GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX4GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX4GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX4GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX4GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX4GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX4GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX4GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX4GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX4GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX4GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX4GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX4GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX4GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX4GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX4GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX4GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX4GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX4GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX4GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX4GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX4GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX4GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX4GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX4GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX4GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX4GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX4GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX4GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX4GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX4GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX4GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX4GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX4GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX4LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX4LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX4LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX4LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX4LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX4LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX4LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX4LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX4LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX4LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX4LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX4LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX4LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX4LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX4GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX4GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX4GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX4GTR0_WDQSL_MASK 
+#define DDR_PHY_DX4GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX4GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX4GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX4GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX4GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX4GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX4GTR0_WLSL_MASK 
+#define DDR_PHY_DX4GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX4GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX4GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX4GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX4GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX4GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX4GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX4GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX4GTR0_DGSL_MASK 
+#define DDR_PHY_DX4GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX4GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX4GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX5GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX5GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX5GCR0_CALBYP_MASK 
+#define DDR_PHY_DX5GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX5GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX5GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX5GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX5GCR0_MDLEN_MASK 
+#define DDR_PHY_DX5GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX5GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX5GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX5GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX5GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX5GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX5GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX5GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX5GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX5GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX5GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX5GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX5GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX5GCR0_RDDLY_MASK 
+#define DDR_PHY_DX5GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX5GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX5GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX5GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX5GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX5GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX5GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX5GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX5GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX5GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX5GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX5GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX5GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX5GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX5GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX5GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX5GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX5GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX5GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX5GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX5GCR0_RTTOH_MASK 
+#define DDR_PHY_DX5GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX5GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX5GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX5GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX5GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX5GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX5GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX5GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX5GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX5GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX5GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX5GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX5GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX5GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX5GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX5GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX5GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX5GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX5GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX5GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX5GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX5GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX5GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX5GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX5GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX5GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX5GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX5GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX5GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX5GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX5GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX5GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX5GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX5GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX5GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX5GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX5GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX5GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX5GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX5GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX5GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX5GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX5GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX5GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX5GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX5GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX5GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX5GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX5GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX5GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX5GCR1_QSSEL_MASK 
+#define DDR_PHY_DX5GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX5GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX5GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX5GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_OEEN_MASK 
+#define DDR_PHY_DX5GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX5GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX5GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX5GCR1_PDREN_MASK 
+#define DDR_PHY_DX5GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX5GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX5GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX5GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_TEEN_MASK 
+#define DDR_PHY_DX5GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX5GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX5GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_DSEN_MASK 
+#define DDR_PHY_DX5GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX5GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX5GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_DMEN_MASK 
+#define DDR_PHY_DX5GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX5GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX5GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_DQEN_MASK 
+#define DDR_PHY_DX5GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX5GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX5GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX5GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX5GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX5GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX5GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX5GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX5GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX5GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX5GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX5GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX5GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX5GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX5GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX5GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX5GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX5GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX5GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX5GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX5GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX5GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX5GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX5GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX5GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX5GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX5GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX5GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX5GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX5GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX5GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX5GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX5GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX5GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX5GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX5GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX5GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX5GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX5GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX5GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX5GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX5GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX5GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX5GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX5GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX5GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX5GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX5GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX5GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX5GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX5GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX5GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX5GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX5GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX5GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX5GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX5GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX5LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX5LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX5LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX5LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX5LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX5LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX5LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX5LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX5LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX5LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX5LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX5LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX5LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX5LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX5GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX5GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX5GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX5GTR0_WDQSL_MASK 
+#define DDR_PHY_DX5GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX5GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX5GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX5GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX5GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX5GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX5GTR0_WLSL_MASK 
+#define DDR_PHY_DX5GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX5GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX5GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX5GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX5GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX5GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX5GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX5GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX5GTR0_DGSL_MASK 
+#define DDR_PHY_DX5GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX5GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX5GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX6GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX6GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX6GCR0_CALBYP_MASK 
+#define DDR_PHY_DX6GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX6GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX6GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX6GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX6GCR0_MDLEN_MASK 
+#define DDR_PHY_DX6GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX6GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX6GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX6GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX6GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX6GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX6GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX6GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX6GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX6GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX6GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX6GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX6GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX6GCR0_RDDLY_MASK 
+#define DDR_PHY_DX6GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX6GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX6GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX6GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX6GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX6GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX6GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX6GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX6GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX6GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX6GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX6GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX6GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX6GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX6GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX6GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX6GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX6GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX6GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX6GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX6GCR0_RTTOH_MASK 
+#define DDR_PHY_DX6GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX6GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX6GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX6GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX6GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX6GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX6GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX6GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX6GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX6GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX6GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX6GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX6GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX6GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX6GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX6GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX6GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX6GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX6GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX6GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX6GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX6GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX6GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX6GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX6GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX6GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX6GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX6GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX6GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX6GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX6GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX6GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX6GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX6GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX6GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX6GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX6GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX6GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX6GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX6GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX6GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX6GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX6GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX6GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX6GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX6GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX6GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX6GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX6GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX6GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX6GCR1_QSSEL_MASK 
+#define DDR_PHY_DX6GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX6GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX6GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX6GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_OEEN_MASK 
+#define DDR_PHY_DX6GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX6GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX6GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX6GCR1_PDREN_MASK 
+#define DDR_PHY_DX6GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX6GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX6GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX6GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_TEEN_MASK 
+#define DDR_PHY_DX6GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX6GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX6GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_DSEN_MASK 
+#define DDR_PHY_DX6GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX6GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX6GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_DMEN_MASK 
+#define DDR_PHY_DX6GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX6GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX6GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_DQEN_MASK 
+#define DDR_PHY_DX6GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX6GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX6GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX6GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX6GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX6GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX6GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX6GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX6GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX6GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX6GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX6GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX6GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX6GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX6GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX6GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX6GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX6GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX6GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX6GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX6GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX6GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX6GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX6GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX6GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX6GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX6GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX6GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX6GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX6GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX6GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX6GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX6GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX6GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX6GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX6GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX6GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX6GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX6GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX6GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX6GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX6GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX6GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX6GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX6GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX6GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX6GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX6GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX6GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX6GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX6GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX6GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX6GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX6GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX6GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX6GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX6GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX6LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX6LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX6LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX6LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX6LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX6LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX6LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX6LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX6LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX6LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX6LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX6LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX6LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX6LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX6GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX6GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX6GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX6GTR0_WDQSL_MASK 
+#define DDR_PHY_DX6GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX6GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX6GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX6GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX6GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX6GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX6GTR0_WLSL_MASK 
+#define DDR_PHY_DX6GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX6GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX6GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX6GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX6GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX6GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX6GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX6GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX6GTR0_DGSL_MASK 
+#define DDR_PHY_DX6GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX6GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX6GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX7GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX7GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX7GCR0_CALBYP_MASK 
+#define DDR_PHY_DX7GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX7GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX7GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX7GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX7GCR0_MDLEN_MASK 
+#define DDR_PHY_DX7GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX7GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX7GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX7GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX7GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX7GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX7GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX7GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX7GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX7GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX7GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX7GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX7GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX7GCR0_RDDLY_MASK 
+#define DDR_PHY_DX7GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX7GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX7GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX7GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX7GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX7GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX7GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX7GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX7GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX7GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX7GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX7GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX7GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX7GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX7GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX7GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX7GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX7GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX7GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX7GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX7GCR0_RTTOH_MASK 
+#define DDR_PHY_DX7GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX7GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX7GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX7GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX7GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX7GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX7GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX7GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX7GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX7GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX7GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX7GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX7GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX7GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX7GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX7GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX7GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX7GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX7GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX7GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX7GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX7GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX7GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX7GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX7GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX7GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX7GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX7GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX7GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX7GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX7GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX7GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX7GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX7GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX7GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX7GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX7GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX7GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX7GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX7GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX7GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX7GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX7GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX7GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX7GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX7GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX7GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX7GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX7GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX7GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX7GCR1_QSSEL_MASK 
+#define DDR_PHY_DX7GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX7GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX7GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX7GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_OEEN_MASK 
+#define DDR_PHY_DX7GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX7GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX7GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX7GCR1_PDREN_MASK 
+#define DDR_PHY_DX7GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX7GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX7GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX7GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_TEEN_MASK 
+#define DDR_PHY_DX7GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX7GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX7GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_DSEN_MASK 
+#define DDR_PHY_DX7GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX7GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX7GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_DMEN_MASK 
+#define DDR_PHY_DX7GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX7GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX7GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_DQEN_MASK 
+#define DDR_PHY_DX7GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX7GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX7GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX7GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX7GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX7GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX7GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX7GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX7GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX7GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX7GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX7GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX7GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX7GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX7GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX7GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX7GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX7GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX7GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX7GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX7GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX7GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX7GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX7GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX7GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX7GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX7GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX7GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX7GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX7GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX7GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX7GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX7GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX7GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX7GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX7GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX7GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX7GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX7GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX7GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX7GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX7GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX7GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX7GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX7GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX7GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX7GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX7GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX7GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX7GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX7GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX7GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX7GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX7GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX7GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX7GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX7GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX7LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX7LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX7LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX7LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX7LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX7LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX7LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX7LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX7LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX7LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX7LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX7LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX7LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX7LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX7GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX7GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX7GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX7GTR0_WDQSL_MASK 
+#define DDR_PHY_DX7GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX7GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX7GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX7GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX7GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX7GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX7GTR0_WLSL_MASK 
+#define DDR_PHY_DX7GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX7GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX7GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX7GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX7GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX7GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX7GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX7GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX7GTR0_DGSL_MASK 
+#define DDR_PHY_DX7GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX7GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX7GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX8GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX8GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX8GCR0_CALBYP_MASK 
+#define DDR_PHY_DX8GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX8GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX8GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX8GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX8GCR0_MDLEN_MASK 
+#define DDR_PHY_DX8GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX8GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX8GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX8GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX8GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX8GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX8GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX8GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX8GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX8GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX8GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX8GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX8GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX8GCR0_RDDLY_MASK 
+#define DDR_PHY_DX8GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX8GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX8GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX8GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX8GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX8GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX8GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX8GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX8GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX8GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX8GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX8GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX8GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX8GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX8GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX8GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX8GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX8GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX8GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX8GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX8GCR0_RTTOH_MASK 
+#define DDR_PHY_DX8GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX8GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX8GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX8GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX8GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX8GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX8GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX8GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX8GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX8GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX8GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX8GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX8GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX8GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX8GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX8GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX8GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX8GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX8GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX8GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX8GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX8GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX8GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX8GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX8GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX8GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX8GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX8GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX8GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX8GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX8GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX8GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX8GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX8GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX8GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX8GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX8GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX8GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX8GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX8GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX8GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX8GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX8GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX8GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX8GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX8GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX8GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX8GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX8GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX8GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX8GCR1_QSSEL_MASK 
+#define DDR_PHY_DX8GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX8GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX8GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX8GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_OEEN_MASK 
+#define DDR_PHY_DX8GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX8GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX8GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX8GCR1_PDREN_MASK 
+#define DDR_PHY_DX8GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX8GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX8GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX8GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_TEEN_MASK 
+#define DDR_PHY_DX8GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX8GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX8GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_DSEN_MASK 
+#define DDR_PHY_DX8GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX8GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX8GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_DMEN_MASK 
+#define DDR_PHY_DX8GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX8GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX8GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_DQEN_MASK 
+#define DDR_PHY_DX8GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX8GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX8GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX8GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX8GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX8GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX8GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX8GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX8GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX8GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX8GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX8GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX8GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX8GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX8GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX8GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX8GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX8GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX8GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX8GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX8GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX8GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX8GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX8GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX8GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX8GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX8GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX8GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX8GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX8GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX8GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX8GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX8GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX8GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX8GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX8GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX8GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX8GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX8GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX8GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX8GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX8GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX8GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX8GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX8GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX8GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX8GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX8GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX8GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX8GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX8GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX8GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX8GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX8GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX8GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX8GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX8GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX8LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX8LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX8LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX8LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX8LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX8LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX8LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX8LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX8LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX8LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX8LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX8LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX8LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX8GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX8GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX8GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX8GTR0_WDQSL_MASK 
+#define DDR_PHY_DX8GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX8GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX8GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX8GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX8GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX8GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX8GTR0_WLSL_MASK 
+#define DDR_PHY_DX8GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX8GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX8GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX8GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX8GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX8GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX8GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX8GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX8GTR0_DGSL_MASK 
+#define DDR_PHY_DX8GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX8GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX8GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL0DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL0DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL0DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL0DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL0DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL0DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL0DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL0DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL0DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL0DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL0DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL0DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL0DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL0DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL0DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL0DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL0DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL0DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL0DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL0DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL0DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL0DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL0DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL0DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL0DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL0DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL0DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL0IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL0IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL0IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL0IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL0IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL0IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL0IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL0IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL0IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL0IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL0IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL0IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL0IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL1DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL1DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL1DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL1DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL1DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL1DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL1DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL1DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL1DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL1DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL1DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL1DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL1DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL1DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL1DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL1DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL1DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL1DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL1DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL1DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL1DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL1DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL1DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL1DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL1DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL1DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL1DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL1IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL1IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL1IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL1IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL1IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL1IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL1IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL1IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL1IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL1IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL1IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL1IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL1IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL2DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL2DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL2DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL2DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL2DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL2DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL2DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL2DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL2DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL2DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL2DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL2DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL2DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL2DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL2DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL2DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL2DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL2DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL2DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL2DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL2DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL2DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL2DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL2DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL2DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL2DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL2DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL2IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL2IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL2IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL2IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL2IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL2IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL2IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL2IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL2IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL2IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL2IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL2IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL2IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL3DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL3DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL3DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL3DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL3DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL3DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL3DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL3DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL3DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL3DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL3DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL3DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL3DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL3DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL3DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL3DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL3DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL3DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL3DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL3DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL3DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL3DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL3DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL3DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL3DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL3DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL3DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL3IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL3IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL3IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL3IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL3IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL3IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL3IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL3IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL3IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL3IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL3IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL3IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL3IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL4DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL4DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL4DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL4DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL4DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL4DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL4DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL4DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL4DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL4DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL4DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL4DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL4DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL4DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL4DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL4DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL4DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL4DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL4DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL4DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL4DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL4DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL4DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL4DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL4DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL4DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL4DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL4IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL4IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL4IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL4IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL4IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL4IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL4IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL4IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL4IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL4IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL4IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL4IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL4IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SLBDQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RRRMODE_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SLBDQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SLBDQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_WRRMODE_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SLBDQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SLBDQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DQSGX_DEFVAL                                          0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SLBDQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SLBDQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_LPPLLPD_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SLBDQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SLBDQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_LPIOPD_DEFVAL                                         0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SLBDQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SLBDQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_QSCNTEN_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SLBDQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SLBDQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_UDQIOM_DEFVAL                                         0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SLBDQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SLBDQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DXSR_DEFVAL                                           0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SLBDQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS# Resistor*/
+#undef DDR_PHY_DX8SLBDQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DQSNRES_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SLBDQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SLBDQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DQSRES_DEFVAL                                         0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SLBDQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PIR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_PIR_RESERVED_31_SHIFT 
+#undef DDR_PHY_PIR_RESERVED_31_MASK 
+#define DDR_PHY_PIR_RESERVED_31_DEFVAL                                             0x00000000
+#define DDR_PHY_PIR_RESERVED_31_SHIFT                                              31
+#define DDR_PHY_PIR_RESERVED_31_MASK                                               0x80000000U
+
+/*Impedance Calibration Bypass*/
+#undef DDR_PHY_PIR_ZCALBYP_DEFVAL 
+#undef DDR_PHY_PIR_ZCALBYP_SHIFT 
+#undef DDR_PHY_PIR_ZCALBYP_MASK 
+#define DDR_PHY_PIR_ZCALBYP_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_ZCALBYP_SHIFT                                                  30
+#define DDR_PHY_PIR_ZCALBYP_MASK                                                   0x40000000U
+
+/*Digital Delay Line (DDL) Calibration Pause*/
+#undef DDR_PHY_PIR_DCALPSE_DEFVAL 
+#undef DDR_PHY_PIR_DCALPSE_SHIFT 
+#undef DDR_PHY_PIR_DCALPSE_MASK 
+#define DDR_PHY_PIR_DCALPSE_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_DCALPSE_SHIFT                                                  29
+#define DDR_PHY_PIR_DCALPSE_MASK                                                   0x20000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PIR_RESERVED_28_21_DEFVAL 
+#undef DDR_PHY_PIR_RESERVED_28_21_SHIFT 
+#undef DDR_PHY_PIR_RESERVED_28_21_MASK 
+#define DDR_PHY_PIR_RESERVED_28_21_DEFVAL                                          0x00000000
+#define DDR_PHY_PIR_RESERVED_28_21_SHIFT                                           21
+#define DDR_PHY_PIR_RESERVED_28_21_MASK                                            0x1FE00000U
+
+/*Write DQS2DQ Training*/
+#undef DDR_PHY_PIR_DQS2DQ_DEFVAL 
+#undef DDR_PHY_PIR_DQS2DQ_SHIFT 
+#undef DDR_PHY_PIR_DQS2DQ_MASK 
+#define DDR_PHY_PIR_DQS2DQ_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_DQS2DQ_SHIFT                                                   20
+#define DDR_PHY_PIR_DQS2DQ_MASK                                                    0x00100000U
+
+/*RDIMM Initialization*/
+#undef DDR_PHY_PIR_RDIMMINIT_DEFVAL 
+#undef DDR_PHY_PIR_RDIMMINIT_SHIFT 
+#undef DDR_PHY_PIR_RDIMMINIT_MASK 
+#define DDR_PHY_PIR_RDIMMINIT_DEFVAL                                               0x00000000
+#define DDR_PHY_PIR_RDIMMINIT_SHIFT                                                19
+#define DDR_PHY_PIR_RDIMMINIT_MASK                                                 0x00080000U
+
+/*Controller DRAM Initialization*/
+#undef DDR_PHY_PIR_CTLDINIT_DEFVAL 
+#undef DDR_PHY_PIR_CTLDINIT_SHIFT 
+#undef DDR_PHY_PIR_CTLDINIT_MASK 
+#define DDR_PHY_PIR_CTLDINIT_DEFVAL                                                0x00000000
+#define DDR_PHY_PIR_CTLDINIT_SHIFT                                                 18
+#define DDR_PHY_PIR_CTLDINIT_MASK                                                  0x00040000U
+
+/*VREF Training*/
+#undef DDR_PHY_PIR_VREF_DEFVAL 
+#undef DDR_PHY_PIR_VREF_SHIFT 
+#undef DDR_PHY_PIR_VREF_MASK 
+#define DDR_PHY_PIR_VREF_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_VREF_SHIFT                                                     17
+#define DDR_PHY_PIR_VREF_MASK                                                      0x00020000U
+
+/*Static Read Training*/
+#undef DDR_PHY_PIR_SRD_DEFVAL 
+#undef DDR_PHY_PIR_SRD_SHIFT 
+#undef DDR_PHY_PIR_SRD_MASK 
+#define DDR_PHY_PIR_SRD_DEFVAL                                                     0x00000000
+#define DDR_PHY_PIR_SRD_SHIFT                                                      16
+#define DDR_PHY_PIR_SRD_MASK                                                       0x00010000U
+
+/*Write Data Eye Training*/
+#undef DDR_PHY_PIR_WREYE_DEFVAL 
+#undef DDR_PHY_PIR_WREYE_SHIFT 
+#undef DDR_PHY_PIR_WREYE_MASK 
+#define DDR_PHY_PIR_WREYE_DEFVAL                                                   0x00000000
+#define DDR_PHY_PIR_WREYE_SHIFT                                                    15
+#define DDR_PHY_PIR_WREYE_MASK                                                     0x00008000U
+
+/*Read Data Eye Training*/
+#undef DDR_PHY_PIR_RDEYE_DEFVAL 
+#undef DDR_PHY_PIR_RDEYE_SHIFT 
+#undef DDR_PHY_PIR_RDEYE_MASK 
+#define DDR_PHY_PIR_RDEYE_DEFVAL                                                   0x00000000
+#define DDR_PHY_PIR_RDEYE_SHIFT                                                    14
+#define DDR_PHY_PIR_RDEYE_MASK                                                     0x00004000U
+
+/*Write Data Bit Deskew*/
+#undef DDR_PHY_PIR_WRDSKW_DEFVAL 
+#undef DDR_PHY_PIR_WRDSKW_SHIFT 
+#undef DDR_PHY_PIR_WRDSKW_MASK 
+#define DDR_PHY_PIR_WRDSKW_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_WRDSKW_SHIFT                                                   13
+#define DDR_PHY_PIR_WRDSKW_MASK                                                    0x00002000U
+
+/*Read Data Bit Deskew*/
+#undef DDR_PHY_PIR_RDDSKW_DEFVAL 
+#undef DDR_PHY_PIR_RDDSKW_SHIFT 
+#undef DDR_PHY_PIR_RDDSKW_MASK 
+#define DDR_PHY_PIR_RDDSKW_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_RDDSKW_SHIFT                                                   12
+#define DDR_PHY_PIR_RDDSKW_MASK                                                    0x00001000U
+
+/*Write Leveling Adjust*/
+#undef DDR_PHY_PIR_WLADJ_DEFVAL 
+#undef DDR_PHY_PIR_WLADJ_SHIFT 
+#undef DDR_PHY_PIR_WLADJ_MASK 
+#define DDR_PHY_PIR_WLADJ_DEFVAL                                                   0x00000000
+#define DDR_PHY_PIR_WLADJ_SHIFT                                                    11
+#define DDR_PHY_PIR_WLADJ_MASK                                                     0x00000800U
+
+/*Read DQS Gate Training*/
+#undef DDR_PHY_PIR_QSGATE_DEFVAL 
+#undef DDR_PHY_PIR_QSGATE_SHIFT 
+#undef DDR_PHY_PIR_QSGATE_MASK 
+#define DDR_PHY_PIR_QSGATE_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_QSGATE_SHIFT                                                   10
+#define DDR_PHY_PIR_QSGATE_MASK                                                    0x00000400U
+
+/*Write Leveling*/
+#undef DDR_PHY_PIR_WL_DEFVAL 
+#undef DDR_PHY_PIR_WL_SHIFT 
+#undef DDR_PHY_PIR_WL_MASK 
+#define DDR_PHY_PIR_WL_DEFVAL                                                      0x00000000
+#define DDR_PHY_PIR_WL_SHIFT                                                       9
+#define DDR_PHY_PIR_WL_MASK                                                        0x00000200U
+
+/*DRAM Initialization*/
+#undef DDR_PHY_PIR_DRAMINIT_DEFVAL 
+#undef DDR_PHY_PIR_DRAMINIT_SHIFT 
+#undef DDR_PHY_PIR_DRAMINIT_MASK 
+#define DDR_PHY_PIR_DRAMINIT_DEFVAL                                                0x00000000
+#define DDR_PHY_PIR_DRAMINIT_SHIFT                                                 8
+#define DDR_PHY_PIR_DRAMINIT_MASK                                                  0x00000100U
+
+/*DRAM Reset (DDR3/DDR4/LPDDR4 Only)*/
+#undef DDR_PHY_PIR_DRAMRST_DEFVAL 
+#undef DDR_PHY_PIR_DRAMRST_SHIFT 
+#undef DDR_PHY_PIR_DRAMRST_MASK 
+#define DDR_PHY_PIR_DRAMRST_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_DRAMRST_SHIFT                                                  7
+#define DDR_PHY_PIR_DRAMRST_MASK                                                   0x00000080U
+
+/*PHY Reset*/
+#undef DDR_PHY_PIR_PHYRST_DEFVAL 
+#undef DDR_PHY_PIR_PHYRST_SHIFT 
+#undef DDR_PHY_PIR_PHYRST_MASK 
+#define DDR_PHY_PIR_PHYRST_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_PHYRST_SHIFT                                                   6
+#define DDR_PHY_PIR_PHYRST_MASK                                                    0x00000040U
+
+/*Digital Delay Line (DDL) Calibration*/
+#undef DDR_PHY_PIR_DCAL_DEFVAL 
+#undef DDR_PHY_PIR_DCAL_SHIFT 
+#undef DDR_PHY_PIR_DCAL_MASK 
+#define DDR_PHY_PIR_DCAL_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_DCAL_SHIFT                                                     5
+#define DDR_PHY_PIR_DCAL_MASK                                                      0x00000020U
+
+/*PLL Initialiazation*/
+#undef DDR_PHY_PIR_PLLINIT_DEFVAL 
+#undef DDR_PHY_PIR_PLLINIT_SHIFT 
+#undef DDR_PHY_PIR_PLLINIT_MASK 
+#define DDR_PHY_PIR_PLLINIT_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_PLLINIT_SHIFT                                                  4
+#define DDR_PHY_PIR_PLLINIT_MASK                                                   0x00000010U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PIR_RESERVED_3_DEFVAL 
+#undef DDR_PHY_PIR_RESERVED_3_SHIFT 
+#undef DDR_PHY_PIR_RESERVED_3_MASK 
+#define DDR_PHY_PIR_RESERVED_3_DEFVAL                                              0x00000000
+#define DDR_PHY_PIR_RESERVED_3_SHIFT                                               3
+#define DDR_PHY_PIR_RESERVED_3_MASK                                                0x00000008U
+
+/*CA Training*/
+#undef DDR_PHY_PIR_CA_DEFVAL 
+#undef DDR_PHY_PIR_CA_SHIFT 
+#undef DDR_PHY_PIR_CA_MASK 
+#define DDR_PHY_PIR_CA_DEFVAL                                                      0x00000000
+#define DDR_PHY_PIR_CA_SHIFT                                                       2
+#define DDR_PHY_PIR_CA_MASK                                                        0x00000004U
+
+/*Impedance Calibration*/
+#undef DDR_PHY_PIR_ZCAL_DEFVAL 
+#undef DDR_PHY_PIR_ZCAL_SHIFT 
+#undef DDR_PHY_PIR_ZCAL_MASK 
+#define DDR_PHY_PIR_ZCAL_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_ZCAL_SHIFT                                                     1
+#define DDR_PHY_PIR_ZCAL_MASK                                                      0x00000002U
+
+/*Initialization Trigger*/
+#undef DDR_PHY_PIR_INIT_DEFVAL 
+#undef DDR_PHY_PIR_INIT_SHIFT 
+#undef DDR_PHY_PIR_INIT_MASK 
+#define DDR_PHY_PIR_INIT_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_INIT_SHIFT                                                     0
+#define DDR_PHY_PIR_INIT_MASK                                                      0x00000001U
+#undef IOU_SLCR_MIO_PIN_0_OFFSET 
+#define IOU_SLCR_MIO_PIN_0_OFFSET                                                  0XFF180000
+#undef IOU_SLCR_MIO_PIN_1_OFFSET 
+#define IOU_SLCR_MIO_PIN_1_OFFSET                                                  0XFF180004
+#undef IOU_SLCR_MIO_PIN_2_OFFSET 
+#define IOU_SLCR_MIO_PIN_2_OFFSET                                                  0XFF180008
+#undef IOU_SLCR_MIO_PIN_3_OFFSET 
+#define IOU_SLCR_MIO_PIN_3_OFFSET                                                  0XFF18000C
+#undef IOU_SLCR_MIO_PIN_4_OFFSET 
+#define IOU_SLCR_MIO_PIN_4_OFFSET                                                  0XFF180010
+#undef IOU_SLCR_MIO_PIN_5_OFFSET 
+#define IOU_SLCR_MIO_PIN_5_OFFSET                                                  0XFF180014
+#undef IOU_SLCR_MIO_PIN_6_OFFSET 
+#define IOU_SLCR_MIO_PIN_6_OFFSET                                                  0XFF180018
+#undef IOU_SLCR_MIO_PIN_7_OFFSET 
+#define IOU_SLCR_MIO_PIN_7_OFFSET                                                  0XFF18001C
+#undef IOU_SLCR_MIO_PIN_8_OFFSET 
+#define IOU_SLCR_MIO_PIN_8_OFFSET                                                  0XFF180020
+#undef IOU_SLCR_MIO_PIN_9_OFFSET 
+#define IOU_SLCR_MIO_PIN_9_OFFSET                                                  0XFF180024
+#undef IOU_SLCR_MIO_PIN_10_OFFSET 
+#define IOU_SLCR_MIO_PIN_10_OFFSET                                                 0XFF180028
+#undef IOU_SLCR_MIO_PIN_11_OFFSET 
+#define IOU_SLCR_MIO_PIN_11_OFFSET                                                 0XFF18002C
+#undef IOU_SLCR_MIO_PIN_12_OFFSET 
+#define IOU_SLCR_MIO_PIN_12_OFFSET                                                 0XFF180030
+#undef IOU_SLCR_MIO_PIN_13_OFFSET 
+#define IOU_SLCR_MIO_PIN_13_OFFSET                                                 0XFF180034
+#undef IOU_SLCR_MIO_PIN_14_OFFSET 
+#define IOU_SLCR_MIO_PIN_14_OFFSET                                                 0XFF180038
+#undef IOU_SLCR_MIO_PIN_15_OFFSET 
+#define IOU_SLCR_MIO_PIN_15_OFFSET                                                 0XFF18003C
+#undef IOU_SLCR_MIO_PIN_16_OFFSET 
+#define IOU_SLCR_MIO_PIN_16_OFFSET                                                 0XFF180040
+#undef IOU_SLCR_MIO_PIN_17_OFFSET 
+#define IOU_SLCR_MIO_PIN_17_OFFSET                                                 0XFF180044
+#undef IOU_SLCR_MIO_PIN_18_OFFSET 
+#define IOU_SLCR_MIO_PIN_18_OFFSET                                                 0XFF180048
+#undef IOU_SLCR_MIO_PIN_19_OFFSET 
+#define IOU_SLCR_MIO_PIN_19_OFFSET                                                 0XFF18004C
+#undef IOU_SLCR_MIO_PIN_20_OFFSET 
+#define IOU_SLCR_MIO_PIN_20_OFFSET                                                 0XFF180050
+#undef IOU_SLCR_MIO_PIN_21_OFFSET 
+#define IOU_SLCR_MIO_PIN_21_OFFSET                                                 0XFF180054
+#undef IOU_SLCR_MIO_PIN_22_OFFSET 
+#define IOU_SLCR_MIO_PIN_22_OFFSET                                                 0XFF180058
+#undef IOU_SLCR_MIO_PIN_23_OFFSET 
+#define IOU_SLCR_MIO_PIN_23_OFFSET                                                 0XFF18005C
+#undef IOU_SLCR_MIO_PIN_24_OFFSET 
+#define IOU_SLCR_MIO_PIN_24_OFFSET                                                 0XFF180060
+#undef IOU_SLCR_MIO_PIN_25_OFFSET 
+#define IOU_SLCR_MIO_PIN_25_OFFSET                                                 0XFF180064
+#undef IOU_SLCR_MIO_PIN_26_OFFSET 
+#define IOU_SLCR_MIO_PIN_26_OFFSET                                                 0XFF180068
+#undef IOU_SLCR_MIO_PIN_27_OFFSET 
+#define IOU_SLCR_MIO_PIN_27_OFFSET                                                 0XFF18006C
+#undef IOU_SLCR_MIO_PIN_28_OFFSET 
+#define IOU_SLCR_MIO_PIN_28_OFFSET                                                 0XFF180070
+#undef IOU_SLCR_MIO_PIN_29_OFFSET 
+#define IOU_SLCR_MIO_PIN_29_OFFSET                                                 0XFF180074
+#undef IOU_SLCR_MIO_PIN_30_OFFSET 
+#define IOU_SLCR_MIO_PIN_30_OFFSET                                                 0XFF180078
+#undef IOU_SLCR_MIO_PIN_31_OFFSET 
+#define IOU_SLCR_MIO_PIN_31_OFFSET                                                 0XFF18007C
+#undef IOU_SLCR_MIO_PIN_32_OFFSET 
+#define IOU_SLCR_MIO_PIN_32_OFFSET                                                 0XFF180080
+#undef IOU_SLCR_MIO_PIN_33_OFFSET 
+#define IOU_SLCR_MIO_PIN_33_OFFSET                                                 0XFF180084
+#undef IOU_SLCR_MIO_PIN_34_OFFSET 
+#define IOU_SLCR_MIO_PIN_34_OFFSET                                                 0XFF180088
+#undef IOU_SLCR_MIO_PIN_35_OFFSET 
+#define IOU_SLCR_MIO_PIN_35_OFFSET                                                 0XFF18008C
+#undef IOU_SLCR_MIO_PIN_36_OFFSET 
+#define IOU_SLCR_MIO_PIN_36_OFFSET                                                 0XFF180090
+#undef IOU_SLCR_MIO_PIN_37_OFFSET 
+#define IOU_SLCR_MIO_PIN_37_OFFSET                                                 0XFF180094
+#undef IOU_SLCR_MIO_PIN_38_OFFSET 
+#define IOU_SLCR_MIO_PIN_38_OFFSET                                                 0XFF180098
+#undef IOU_SLCR_MIO_PIN_39_OFFSET 
+#define IOU_SLCR_MIO_PIN_39_OFFSET                                                 0XFF18009C
+#undef IOU_SLCR_MIO_PIN_40_OFFSET 
+#define IOU_SLCR_MIO_PIN_40_OFFSET                                                 0XFF1800A0
+#undef IOU_SLCR_MIO_PIN_41_OFFSET 
+#define IOU_SLCR_MIO_PIN_41_OFFSET                                                 0XFF1800A4
+#undef IOU_SLCR_MIO_PIN_42_OFFSET 
+#define IOU_SLCR_MIO_PIN_42_OFFSET                                                 0XFF1800A8
+#undef IOU_SLCR_MIO_PIN_43_OFFSET 
+#define IOU_SLCR_MIO_PIN_43_OFFSET                                                 0XFF1800AC
+#undef IOU_SLCR_MIO_PIN_44_OFFSET 
+#define IOU_SLCR_MIO_PIN_44_OFFSET                                                 0XFF1800B0
+#undef IOU_SLCR_MIO_PIN_45_OFFSET 
+#define IOU_SLCR_MIO_PIN_45_OFFSET                                                 0XFF1800B4
+#undef IOU_SLCR_MIO_PIN_46_OFFSET 
+#define IOU_SLCR_MIO_PIN_46_OFFSET                                                 0XFF1800B8
+#undef IOU_SLCR_MIO_PIN_47_OFFSET 
+#define IOU_SLCR_MIO_PIN_47_OFFSET                                                 0XFF1800BC
+#undef IOU_SLCR_MIO_PIN_48_OFFSET 
+#define IOU_SLCR_MIO_PIN_48_OFFSET                                                 0XFF1800C0
+#undef IOU_SLCR_MIO_PIN_49_OFFSET 
+#define IOU_SLCR_MIO_PIN_49_OFFSET                                                 0XFF1800C4
+#undef IOU_SLCR_MIO_PIN_50_OFFSET 
+#define IOU_SLCR_MIO_PIN_50_OFFSET                                                 0XFF1800C8
+#undef IOU_SLCR_MIO_PIN_51_OFFSET 
+#define IOU_SLCR_MIO_PIN_51_OFFSET                                                 0XFF1800CC
+#undef IOU_SLCR_MIO_PIN_52_OFFSET 
+#define IOU_SLCR_MIO_PIN_52_OFFSET                                                 0XFF1800D0
+#undef IOU_SLCR_MIO_PIN_53_OFFSET 
+#define IOU_SLCR_MIO_PIN_53_OFFSET                                                 0XFF1800D4
+#undef IOU_SLCR_MIO_PIN_54_OFFSET 
+#define IOU_SLCR_MIO_PIN_54_OFFSET                                                 0XFF1800D8
+#undef IOU_SLCR_MIO_PIN_55_OFFSET 
+#define IOU_SLCR_MIO_PIN_55_OFFSET                                                 0XFF1800DC
+#undef IOU_SLCR_MIO_PIN_56_OFFSET 
+#define IOU_SLCR_MIO_PIN_56_OFFSET                                                 0XFF1800E0
+#undef IOU_SLCR_MIO_PIN_57_OFFSET 
+#define IOU_SLCR_MIO_PIN_57_OFFSET                                                 0XFF1800E4
+#undef IOU_SLCR_MIO_PIN_58_OFFSET 
+#define IOU_SLCR_MIO_PIN_58_OFFSET                                                 0XFF1800E8
+#undef IOU_SLCR_MIO_PIN_59_OFFSET 
+#define IOU_SLCR_MIO_PIN_59_OFFSET                                                 0XFF1800EC
+#undef IOU_SLCR_MIO_PIN_60_OFFSET 
+#define IOU_SLCR_MIO_PIN_60_OFFSET                                                 0XFF1800F0
+#undef IOU_SLCR_MIO_PIN_61_OFFSET 
+#define IOU_SLCR_MIO_PIN_61_OFFSET                                                 0XFF1800F4
+#undef IOU_SLCR_MIO_PIN_62_OFFSET 
+#define IOU_SLCR_MIO_PIN_62_OFFSET                                                 0XFF1800F8
+#undef IOU_SLCR_MIO_PIN_63_OFFSET 
+#define IOU_SLCR_MIO_PIN_63_OFFSET                                                 0XFF1800FC
+#undef IOU_SLCR_MIO_PIN_64_OFFSET 
+#define IOU_SLCR_MIO_PIN_64_OFFSET                                                 0XFF180100
+#undef IOU_SLCR_MIO_PIN_65_OFFSET 
+#define IOU_SLCR_MIO_PIN_65_OFFSET                                                 0XFF180104
+#undef IOU_SLCR_MIO_PIN_66_OFFSET 
+#define IOU_SLCR_MIO_PIN_66_OFFSET                                                 0XFF180108
+#undef IOU_SLCR_MIO_PIN_67_OFFSET 
+#define IOU_SLCR_MIO_PIN_67_OFFSET                                                 0XFF18010C
+#undef IOU_SLCR_MIO_PIN_68_OFFSET 
+#define IOU_SLCR_MIO_PIN_68_OFFSET                                                 0XFF180110
+#undef IOU_SLCR_MIO_PIN_69_OFFSET 
+#define IOU_SLCR_MIO_PIN_69_OFFSET                                                 0XFF180114
+#undef IOU_SLCR_MIO_PIN_70_OFFSET 
+#define IOU_SLCR_MIO_PIN_70_OFFSET                                                 0XFF180118
+#undef IOU_SLCR_MIO_PIN_71_OFFSET 
+#define IOU_SLCR_MIO_PIN_71_OFFSET                                                 0XFF18011C
+#undef IOU_SLCR_MIO_PIN_72_OFFSET 
+#define IOU_SLCR_MIO_PIN_72_OFFSET                                                 0XFF180120
+#undef IOU_SLCR_MIO_PIN_73_OFFSET 
+#define IOU_SLCR_MIO_PIN_73_OFFSET                                                 0XFF180124
+#undef IOU_SLCR_MIO_PIN_74_OFFSET 
+#define IOU_SLCR_MIO_PIN_74_OFFSET                                                 0XFF180128
+#undef IOU_SLCR_MIO_PIN_75_OFFSET 
+#define IOU_SLCR_MIO_PIN_75_OFFSET                                                 0XFF18012C
+#undef IOU_SLCR_MIO_PIN_76_OFFSET 
+#define IOU_SLCR_MIO_PIN_76_OFFSET                                                 0XFF180130
+#undef IOU_SLCR_MIO_PIN_77_OFFSET 
+#define IOU_SLCR_MIO_PIN_77_OFFSET                                                 0XFF180134
+#undef IOU_SLCR_MIO_MST_TRI0_OFFSET 
+#define IOU_SLCR_MIO_MST_TRI0_OFFSET                                               0XFF180204
+#undef IOU_SLCR_MIO_MST_TRI1_OFFSET 
+#define IOU_SLCR_MIO_MST_TRI1_OFFSET                                               0XFF180208
+#undef IOU_SLCR_MIO_MST_TRI2_OFFSET 
+#define IOU_SLCR_MIO_MST_TRI2_OFFSET                                               0XFF18020C
+#undef IOU_SLCR_BANK0_CTRL0_OFFSET 
+#define IOU_SLCR_BANK0_CTRL0_OFFSET                                                0XFF180138
+#undef IOU_SLCR_BANK0_CTRL1_OFFSET 
+#define IOU_SLCR_BANK0_CTRL1_OFFSET                                                0XFF18013C
+#undef IOU_SLCR_BANK0_CTRL3_OFFSET 
+#define IOU_SLCR_BANK0_CTRL3_OFFSET                                                0XFF180140
+#undef IOU_SLCR_BANK0_CTRL4_OFFSET 
+#define IOU_SLCR_BANK0_CTRL4_OFFSET                                                0XFF180144
+#undef IOU_SLCR_BANK0_CTRL5_OFFSET 
+#define IOU_SLCR_BANK0_CTRL5_OFFSET                                                0XFF180148
+#undef IOU_SLCR_BANK0_CTRL6_OFFSET 
+#define IOU_SLCR_BANK0_CTRL6_OFFSET                                                0XFF18014C
+#undef IOU_SLCR_BANK1_CTRL0_OFFSET 
+#define IOU_SLCR_BANK1_CTRL0_OFFSET                                                0XFF180154
+#undef IOU_SLCR_BANK1_CTRL1_OFFSET 
+#define IOU_SLCR_BANK1_CTRL1_OFFSET                                                0XFF180158
+#undef IOU_SLCR_BANK1_CTRL3_OFFSET 
+#define IOU_SLCR_BANK1_CTRL3_OFFSET                                                0XFF18015C
+#undef IOU_SLCR_BANK1_CTRL4_OFFSET 
+#define IOU_SLCR_BANK1_CTRL4_OFFSET                                                0XFF180160
+#undef IOU_SLCR_BANK1_CTRL5_OFFSET 
+#define IOU_SLCR_BANK1_CTRL5_OFFSET                                                0XFF180164
+#undef IOU_SLCR_BANK1_CTRL6_OFFSET 
+#define IOU_SLCR_BANK1_CTRL6_OFFSET                                                0XFF180168
+#undef IOU_SLCR_BANK2_CTRL0_OFFSET 
+#define IOU_SLCR_BANK2_CTRL0_OFFSET                                                0XFF180170
+#undef IOU_SLCR_BANK2_CTRL1_OFFSET 
+#define IOU_SLCR_BANK2_CTRL1_OFFSET                                                0XFF180174
+#undef IOU_SLCR_BANK2_CTRL3_OFFSET 
+#define IOU_SLCR_BANK2_CTRL3_OFFSET                                                0XFF180178
+#undef IOU_SLCR_BANK2_CTRL4_OFFSET 
+#define IOU_SLCR_BANK2_CTRL4_OFFSET                                                0XFF18017C
+#undef IOU_SLCR_BANK2_CTRL5_OFFSET 
+#define IOU_SLCR_BANK2_CTRL5_OFFSET                                                0XFF180180
+#undef IOU_SLCR_BANK2_CTRL6_OFFSET 
+#define IOU_SLCR_BANK2_CTRL6_OFFSET                                                0XFF180184
+#undef IOU_SLCR_MIO_LOOPBACK_OFFSET 
+#define IOU_SLCR_MIO_LOOPBACK_OFFSET                                               0XFF180200
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out- (QSPI Clock)*/
+#undef IOU_SLCR_MIO_PIN_0_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_0_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_0_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_0_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[0]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[0]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_0_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_0_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[0]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[0]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)*/
+#undef IOU_SLCR_MIO_PIN_0_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_0_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_mi1- (QSPI Databus) 1= qspi, Output, qspi_so_mo1- (QSPI Data
+		us)*/
+#undef IOU_SLCR_MIO_PIN_1_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_1_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_1_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_1_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[1]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[1]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_1_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_1_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[1]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[1]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)*/
+#undef IOU_SLCR_MIO_PIN_1_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_1_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi2- (QSPI Databus) 1= qspi, Output, qspi_mo2- (QSPI Databus)*/
+#undef IOU_SLCR_MIO_PIN_2_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_2_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_2_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_2_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[2]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[2]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_2_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_2_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[2]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[2]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc2, Input, ttc2_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_2_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_2_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi3- (QSPI Databus) 1= qspi, Output, qspi_mo3- (QSPI Databus)*/
+#undef IOU_SLCR_MIO_PIN_3_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_3_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_3_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_3_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[3]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[3]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_3_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_3_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[3]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[3]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_3_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_3_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_mo_mo0- (QSPI Databus) 1= qspi, Input, qspi_si_mi0- (QSPI Data
+		us)*/
+#undef IOU_SLCR_MIO_PIN_4_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_4_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_4_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_4_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[4]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[4]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_4_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_4_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[4]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[4]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_4_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_4_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out- (QSPI Slave Select)*/
+#undef IOU_SLCR_MIO_PIN_5_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_5_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_5_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_5_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[5]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[5]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_5_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_5_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[5]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[5]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_5_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_5_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_clk_for_lpbk- (QSPI Clock to be fed-back)*/
+#undef IOU_SLCR_MIO_PIN_6_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_6_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_6_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_6_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[6]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[6]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_6_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_6_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[6]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[6]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1
+		sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace,
+		Output, tracedq[4]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_6_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_6_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out_upper- (QSPI Slave Select upper)*/
+#undef IOU_SLCR_MIO_PIN_7_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_7_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_7_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_7_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[7]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[7]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_7_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_7_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[7]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[7]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= 
+		tc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, 
+		racedq[5]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_7_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_7_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[0]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[0]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_8_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_8_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_8_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_8_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[8]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[8]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_8_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_8_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[8]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[8]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc
+		, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Tr
+		ce Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_8_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_8_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[1]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[1]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_9_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_9_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)*/
+#undef IOU_SLCR_MIO_PIN_9_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_9_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[9]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[9]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_9_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_9_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[9]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[9]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, 
+		utput, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (U
+		RT receiver serial input) 7= trace, Output, tracedq[7]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_9_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_9_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[2]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[2]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_10_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_10_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_10_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_10_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[10]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[10]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_10_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_10_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[10]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[10]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_10_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_10_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[3]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[3]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_11_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_11_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_11_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_11_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[11]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[11]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_11_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_11_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[11]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[11]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_11_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_11_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out_upper- (QSPI Upper Clock)*/
+#undef IOU_SLCR_MIO_PIN_12_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_12_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		*/
+#undef IOU_SLCR_MIO_PIN_12_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_12_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[12]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[12]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_12_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_12_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[12]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[12]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cl
+		ck) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trac
+		dq[10]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_12_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_12_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_13_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_13_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[0]- (NAND chip enable)*/
+#undef IOU_SLCR_MIO_PIN_13_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_13_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[13]- (Test Scan Port) = test_scan, Output, test_scan_out[13]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_13_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_13_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[13]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[13]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave
+		out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, tracedq[11]- (Trace Port Dat
+		bus)*/
+#undef IOU_SLCR_MIO_PIN_13_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_13_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_14_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_14_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_cle- (NAND Command Latch Enable)*/
+#undef IOU_SLCR_MIO_PIN_14_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_14_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[14]- (Test Scan Port) = test_scan, Output, test_scan_out[14]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_14_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_14_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[14]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[14]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_
+		n- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_14_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_14_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_15_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_15_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ale- (NAND Address Latch Enable)*/
+#undef IOU_SLCR_MIO_PIN_15_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_15_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[15]- (Test Scan Port) = test_scan, Output, test_scan_out[15]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_15_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_15_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[15]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[15]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out
+		0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter seri
+		l output) 7= trace, Output, tracedq[13]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_15_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_15_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_16_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_16_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[0]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[0]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_16_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_16_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[16]- (Test Scan Port) = test_scan, Output, test_scan_out[16]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_16_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_16_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[16]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[16]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_16_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_16_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_17_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_17_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[1]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[1]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_17_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_17_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[17]- (Test Scan Port) = test_scan, Output, test_scan_out[17]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_17_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_17_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[17]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[17]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_17_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_17_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_18_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_18_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[2]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[2]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_18_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_18_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[18]- (Test Scan Port) = test_scan, Output, test_scan_out[18]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_18_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_18_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[18]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[18]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_18_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_18_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_19_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_19_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[3]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[3]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_19_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_19_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[19]- (Test Scan Port) = test_scan, Output, test_scan_out[19]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_19_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_19_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[19]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[19]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_19_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_19_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_20_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_20_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[4]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[4]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_20_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_20_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[20]- (Test Scan Port) = test_scan, Output, test_scan_out[20]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_20_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_20_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[20]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[20]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= t
+		c1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_20_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_20_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_21_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_21_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[5]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[5]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_21_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_21_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= test_scan, Input, test_scan_in[21]- (Test Scan Port) = test_scan, Output, test_scan_out[21]- (Test Scan Port) 
+		= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_21_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_21_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[21]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[21]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- 
+		UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_21_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_21_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_22_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_22_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_we_b- (NAND Write Enable)*/
+#undef IOU_SLCR_MIO_PIN_22_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_22_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= test_scan, Input, test_scan_in[22]-
+		(Test Scan Port) = test_scan, Output, test_scan_out[22]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_22_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_22_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[22]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[22]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed*/
+#undef IOU_SLCR_MIO_PIN_22_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_22_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_23_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_23_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[6]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[6]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_23_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_23_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= test_scan, Input, test_scan_in
+		23]- (Test Scan Port) = test_scan, Output, test_scan_out[23]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper
+		*/
+#undef IOU_SLCR_MIO_PIN_23_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_23_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[23]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[23]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_23_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_23_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_24_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_24_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[7]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[7]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_24_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_24_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= test_scan, Input, test
+		scan_in[24]- (Test Scan Port) = test_scan, Output, test_scan_out[24]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ex
+		 Tamper)*/
+#undef IOU_SLCR_MIO_PIN_24_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_24_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[24]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[24]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= Not Used 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1,
+		Output, ua1_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_24_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_24_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_25_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_25_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_re_n- (NAND Read Enable)*/
+#undef IOU_SLCR_MIO_PIN_25_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_25_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= test_scan, Input,
+		test_scan_in[25]- (Test Scan Port) = test_scan, Output, test_scan_out[25]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (C
+		U Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_25_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_25_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[25]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[25]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= Not Used 5= ttc3, Output, ttc3_wave_out- (TTC Waveform 
+		lock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_25_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_25_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_26_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_26_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)*/
+#undef IOU_SLCR_MIO_PIN_26_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_26_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_26_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_26_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_26_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_26_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_27_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_27_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_27_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_27_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_27_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_27_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)*/
+#undef IOU_SLCR_MIO_PIN_27_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_27_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_28_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_28_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_28_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_28_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_28_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_28_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_28_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_28_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_29_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_29_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_29_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_29_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_29_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_29_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_29_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_29_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_30_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_30_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_30_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_30_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_30_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_30_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_so
+		 (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output
+		 tracedq[8]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_30_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_30_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_31_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_31_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_31_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_31_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[31]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[31]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_31_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_31_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[5]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[5]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi
+		_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial out
+		ut) 7= trace, Output, tracedq[9]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_31_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_31_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_32_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_32_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		*/
+#undef IOU_SLCR_MIO_PIN_32_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_32_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[32]- (Test S
+		an Port) = test_scan, Output, test_scan_out[32]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_32_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_32_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[6]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[6]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi
+		_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= 
+		race, Output, tracedq[10]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_32_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_32_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_33_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_33_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_33_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_33_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[33]- (Test S
+		an Port) = test_scan, Output, test_scan_out[33]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_33_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_33_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[7]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[7]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= t
+		c3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, traced
+		[11]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_33_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_33_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_34_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_34_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_34_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_34_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[34]- (Test S
+		an Port) = test_scan, Output, test_scan_out[34]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_34_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_34_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[8]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[8]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc2
+		 Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace P
+		rt Databus)*/
+#undef IOU_SLCR_MIO_PIN_34_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_34_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_35_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_35_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_35_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_35_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[35]- (Test S
+		an Port) = test_scan, Output, test_scan_out[35]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_35_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_35_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[9]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[9]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1,
+		Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- 
+		UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_35_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_35_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_36_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_36_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_36_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_36_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[36]- (Test S
+		an Port) = test_scan, Output, test_scan_out[36]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_36_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_36_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[10]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[10]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_36_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_36_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_37_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_37_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_37_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_37_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[37]- (Test S
+		an Port) = test_scan, Output, test_scan_out[37]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_37_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_37_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[11]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[11]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_37_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_37_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_38_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_38_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_38_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_38_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_38_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_38_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[12]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[12]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clo
+		k) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, trace_clk-
+		(Trace Port Clock)*/
+#undef IOU_SLCR_MIO_PIN_38_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_38_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_39_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_39_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_39_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_39_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= sd1, Input, sd1_data_i
+		[4]- (8-bit Data bus) = sd1, Output, sdio1_data_out[4]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_39_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_39_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[13]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[13]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc0, Output, ttc0_wav
+		_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, trace_ctl- (Trace Port
+		Control Signal)*/
+#undef IOU_SLCR_MIO_PIN_39_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_39_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_40_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_40_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_40_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_40_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= sd1, Input, sd1_data_in[5]- (8-bit Data bus) = sd1, Output, sdio1_data_out[5]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_40_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_40_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[14]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[14]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc3, Input, ttc3_clk
+		in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[0]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_40_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_40_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_41_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_41_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_41_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_41_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[6]- (8-bit Data bus) = sd1, Output, sdio1_data_out[6]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_41_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_41_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[15]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[15]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[
+		]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial in
+		ut) 7= trace, Output, tracedq[1]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_41_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_41_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_42_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_42_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_42_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_42_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[7]- (8-bit Data bus) = sd1, Output, sdio1_data_out[7]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_42_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_42_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[16]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[16]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[2]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_42_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_42_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_43_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_43_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_43_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_43_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_43_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_43_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[17]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[17]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, s
+		i0_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[3]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_43_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_43_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_44_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_44_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_44_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_44_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_44_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_44_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[18]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[18]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, s
+		i1_sclk_out- (SPI Clock) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 Not Used*/
+#undef IOU_SLCR_MIO_PIN_44_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_44_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_45_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_45_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_45_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_45_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_45_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_45_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[19]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[19]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_45_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_45_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_46_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_46_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_46_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_46_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_46_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_46_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[20]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[20]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= tt
+		0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_46_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_46_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_47_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_47_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_47_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_47_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_47_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_47_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[21]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[21]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_47_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_47_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_48_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_48_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_48_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_48_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_48_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_48_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[22]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[22]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not U
+		ed*/
+#undef IOU_SLCR_MIO_PIN_48_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_48_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_49_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_49_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_49_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_49_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_data_in[3]- (8
+		bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_49_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_49_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[23]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[23]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_49_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_49_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)*/
+#undef IOU_SLCR_MIO_PIN_50_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_50_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_50_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_50_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Input, sd1_c
+		d_in- (Command Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_50_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_50_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[24]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[24]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= ttc2, Input, ttc2
+		clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_50_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_50_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)*/
+#undef IOU_SLCR_MIO_PIN_51_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_51_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_51_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_51_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Output, sdio1_clk_out- (SDSDIO clock) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_51_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_51_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[25]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[25]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= mdio1, Input, gem1_mdio_in- (MDIO Data) 4= mdio1, Outp
+		t, gem1_mdio_out- (MDIO Data) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter
+		serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_51_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_51_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_52_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_52_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_clk_in- (ULPI Clock)*/
+#undef IOU_SLCR_MIO_PIN_52_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_52_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_52_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_52_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[0]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[0]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)*/
+#undef IOU_SLCR_MIO_PIN_52_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_52_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_53_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_53_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_dir- (Data bus direction control)*/
+#undef IOU_SLCR_MIO_PIN_53_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_53_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_53_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_53_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[1]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[1]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)*/
+#undef IOU_SLCR_MIO_PIN_53_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_53_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_54_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_54_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[2]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[2]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_54_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_54_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_54_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_54_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[2]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[2]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_54_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_54_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_55_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_55_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_nxt- (Data flow control signal from the PHY)*/
+#undef IOU_SLCR_MIO_PIN_55_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_55_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_55_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_55_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[3]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[3]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_55_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_55_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_56_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_56_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[0]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[0]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_56_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_56_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_56_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_56_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[4]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[4]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_56_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_56_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_57_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_57_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[1]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[1]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_57_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_57_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_57_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_57_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[5]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[5]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_57_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_57_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_58_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_58_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Output, usb0_ulpi_stp- (Asserted to end or interrupt transfers)*/
+#undef IOU_SLCR_MIO_PIN_58_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_58_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_58_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_58_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[6]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[6]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_58_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_58_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_59_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_59_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[3]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[3]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_59_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_59_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_59_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_59_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[7]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[7]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)*/
+#undef IOU_SLCR_MIO_PIN_59_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_59_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_60_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_60_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[4]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[4]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_60_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_60_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_60_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_60_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[8]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[8]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_60_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_60_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_61_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_61_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[5]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[5]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_61_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_61_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_61_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_61_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[9]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[9]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, Output, spi1_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_61_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_61_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_62_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_62_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[6]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[6]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_62_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_62_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_62_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_62_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[10]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[10]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_62_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_62_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_63_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_63_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[7]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[7]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_63_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_63_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_63_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_63_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[11]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[11]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_63_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_63_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_64_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_64_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_clk_in- (ULPI Clock)*/
+#undef IOU_SLCR_MIO_PIN_64_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_64_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_64_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_64_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[12]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[12]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, s
+		i0_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 trace, Output, tracedq[10]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_64_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_64_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_65_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_65_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_dir- (Data bus direction control)*/
+#undef IOU_SLCR_MIO_PIN_65_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_65_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_65_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_65_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[13]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[13]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trac
+		dq[11]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_65_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_65_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_66_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_66_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[2]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[2]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_66_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_66_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_66_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_66_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[14]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[14]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= tt
+		2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace
+		Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_66_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_66_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_67_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_67_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_nxt- (Data flow control signal from the PHY)*/
+#undef IOU_SLCR_MIO_PIN_67_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_67_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_67_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_67_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[15]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[15]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi0_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_67_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_67_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_68_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_68_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[0]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[0]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_68_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_68_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_68_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_68_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[16]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[16]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_68_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_68_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_69_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_69_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[1]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[1]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_69_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_69_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_69_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_69_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[17]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[17]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_69_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_69_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_70_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_70_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Output, usb1_ulpi_stp- (Asserted to end or interrupt transfers)*/
+#undef IOU_SLCR_MIO_PIN_70_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_70_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_70_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_70_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[18]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[18]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed*/
+#undef IOU_SLCR_MIO_PIN_70_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_70_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_71_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_71_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[3]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[3]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_71_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_71_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_71_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_71_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[19]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[19]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_71_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_71_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_72_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_72_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[4]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[4]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_72_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_72_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_72_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_72_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[20]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[20]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= N
+		t Used 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_72_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_72_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_73_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_73_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[5]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[5]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_73_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_73_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_73_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_73_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[21]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[21]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= Not Used 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_73_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_73_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_74_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_74_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[6]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[6]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_74_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_74_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[3]- (8-bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_74_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_74_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[22]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[22]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= Not Used 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_74_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_74_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_75_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_75_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[7]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[7]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_75_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_75_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_cmd_in- (Comma
+		d Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_75_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_75_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[23]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[23]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= Not Used 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_75_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_75_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_76_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_76_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Output, sdio
+		_clk_out- (SDSDIO clock) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_76_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[24]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[24]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= mdio0, Output, gem0_mdc- (MDIO Clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= mdio2, Output, gem2_mdc- (MDIO Clock
+		 6= mdio3, Output, gem3_mdc- (MDIO Clock) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_76_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_77_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_77_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_77_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[25]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[25]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= mdio0, Input, gem0_mdio_in- (MDIO Data) 3= mdio0, Output, gem0_mdio_out- (MDIO Data) 4= mdio1, Input, gem1_mdio_in- (MD
+		O Data) 4= mdio1, Output, gem1_mdio_out- (MDIO Data) 5= mdio2, Input, gem2_mdio_in- (MDIO Data) 5= mdio2, Output, gem2_mdio_o
+		t- (MDIO Data) 6= mdio3, Input, gem3_mdio_in- (MDIO Data) 6= mdio3, Output, gem3_mdio_out- (MDIO Data) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_77_L3_SEL_MASK                                            0x000000E0U
+
+/*Master Tri-state Enable for pin 0, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT                                     0
+#define IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK                                      0x00000001U
+
+/*Master Tri-state Enable for pin 1, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT                                     1
+#define IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK                                      0x00000002U
+
+/*Master Tri-state Enable for pin 2, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT                                     2
+#define IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK                                      0x00000004U
+
+/*Master Tri-state Enable for pin 3, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT                                     3
+#define IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK                                      0x00000008U
+
+/*Master Tri-state Enable for pin 4, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT                                     4
+#define IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK                                      0x00000010U
+
+/*Master Tri-state Enable for pin 5, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT                                     5
+#define IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK                                      0x00000020U
+
+/*Master Tri-state Enable for pin 6, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT                                     6
+#define IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK                                      0x00000040U
+
+/*Master Tri-state Enable for pin 7, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT                                     7
+#define IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK                                      0x00000080U
+
+/*Master Tri-state Enable for pin 8, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT                                     8
+#define IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK                                      0x00000100U
+
+/*Master Tri-state Enable for pin 9, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT                                     9
+#define IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK                                      0x00000200U
+
+/*Master Tri-state Enable for pin 10, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT                                     10
+#define IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK                                      0x00000400U
+
+/*Master Tri-state Enable for pin 11, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT                                     11
+#define IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK                                      0x00000800U
+
+/*Master Tri-state Enable for pin 12, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT                                     12
+#define IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK                                      0x00001000U
+
+/*Master Tri-state Enable for pin 13, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT                                     13
+#define IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK                                      0x00002000U
+
+/*Master Tri-state Enable for pin 14, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT                                     14
+#define IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK                                      0x00004000U
+
+/*Master Tri-state Enable for pin 15, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT                                     15
+#define IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK                                      0x00008000U
+
+/*Master Tri-state Enable for pin 16, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT                                     16
+#define IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK                                      0x00010000U
+
+/*Master Tri-state Enable for pin 17, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT                                     17
+#define IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK                                      0x00020000U
+
+/*Master Tri-state Enable for pin 18, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT                                     18
+#define IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK                                      0x00040000U
+
+/*Master Tri-state Enable for pin 19, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT                                     19
+#define IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK                                      0x00080000U
+
+/*Master Tri-state Enable for pin 20, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT                                     20
+#define IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK                                      0x00100000U
+
+/*Master Tri-state Enable for pin 21, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT                                     21
+#define IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK                                      0x00200000U
+
+/*Master Tri-state Enable for pin 22, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT                                     22
+#define IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK                                      0x00400000U
+
+/*Master Tri-state Enable for pin 23, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT                                     23
+#define IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK                                      0x00800000U
+
+/*Master Tri-state Enable for pin 24, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT                                     24
+#define IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK                                      0x01000000U
+
+/*Master Tri-state Enable for pin 25, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT                                     25
+#define IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK                                      0x02000000U
+
+/*Master Tri-state Enable for pin 26, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT                                     26
+#define IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK                                      0x04000000U
+
+/*Master Tri-state Enable for pin 27, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT                                     27
+#define IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK                                      0x08000000U
+
+/*Master Tri-state Enable for pin 28, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT                                     28
+#define IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK                                      0x10000000U
+
+/*Master Tri-state Enable for pin 29, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT                                     29
+#define IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK                                      0x20000000U
+
+/*Master Tri-state Enable for pin 30, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT                                     30
+#define IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK                                      0x40000000U
+
+/*Master Tri-state Enable for pin 31, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT                                     31
+#define IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK                                      0x80000000U
+
+/*Master Tri-state Enable for pin 32, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT                                     0
+#define IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK                                      0x00000001U
+
+/*Master Tri-state Enable for pin 33, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT                                     1
+#define IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK                                      0x00000002U
+
+/*Master Tri-state Enable for pin 34, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT                                     2
+#define IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK                                      0x00000004U
+
+/*Master Tri-state Enable for pin 35, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT                                     3
+#define IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK                                      0x00000008U
+
+/*Master Tri-state Enable for pin 36, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT                                     4
+#define IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK                                      0x00000010U
+
+/*Master Tri-state Enable for pin 37, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT                                     5
+#define IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK                                      0x00000020U
+
+/*Master Tri-state Enable for pin 38, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT                                     6
+#define IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK                                      0x00000040U
+
+/*Master Tri-state Enable for pin 39, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT                                     7
+#define IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK                                      0x00000080U
+
+/*Master Tri-state Enable for pin 40, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT                                     8
+#define IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK                                      0x00000100U
+
+/*Master Tri-state Enable for pin 41, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT                                     9
+#define IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK                                      0x00000200U
+
+/*Master Tri-state Enable for pin 42, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT                                     10
+#define IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK                                      0x00000400U
+
+/*Master Tri-state Enable for pin 43, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT                                     11
+#define IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK                                      0x00000800U
+
+/*Master Tri-state Enable for pin 44, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT                                     12
+#define IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK                                      0x00001000U
+
+/*Master Tri-state Enable for pin 45, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT                                     13
+#define IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK                                      0x00002000U
+
+/*Master Tri-state Enable for pin 46, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT                                     14
+#define IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK                                      0x00004000U
+
+/*Master Tri-state Enable for pin 47, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT                                     15
+#define IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK                                      0x00008000U
+
+/*Master Tri-state Enable for pin 48, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT                                     16
+#define IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK                                      0x00010000U
+
+/*Master Tri-state Enable for pin 49, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT                                     17
+#define IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK                                      0x00020000U
+
+/*Master Tri-state Enable for pin 50, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT                                     18
+#define IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK                                      0x00040000U
+
+/*Master Tri-state Enable for pin 51, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT                                     19
+#define IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK                                      0x00080000U
+
+/*Master Tri-state Enable for pin 52, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT                                     20
+#define IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK                                      0x00100000U
+
+/*Master Tri-state Enable for pin 53, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT                                     21
+#define IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK                                      0x00200000U
+
+/*Master Tri-state Enable for pin 54, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT                                     22
+#define IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK                                      0x00400000U
+
+/*Master Tri-state Enable for pin 55, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT                                     23
+#define IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK                                      0x00800000U
+
+/*Master Tri-state Enable for pin 56, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT                                     24
+#define IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK                                      0x01000000U
+
+/*Master Tri-state Enable for pin 57, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT                                     25
+#define IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK                                      0x02000000U
+
+/*Master Tri-state Enable for pin 58, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT                                     26
+#define IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK                                      0x04000000U
+
+/*Master Tri-state Enable for pin 59, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT                                     27
+#define IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK                                      0x08000000U
+
+/*Master Tri-state Enable for pin 60, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT                                     28
+#define IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK                                      0x10000000U
+
+/*Master Tri-state Enable for pin 61, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT                                     29
+#define IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK                                      0x20000000U
+
+/*Master Tri-state Enable for pin 62, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT                                     30
+#define IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK                                      0x40000000U
+
+/*Master Tri-state Enable for pin 63, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT                                     31
+#define IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK                                      0x80000000U
+
+/*Master Tri-state Enable for pin 64, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT                                     0
+#define IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK                                      0x00000001U
+
+/*Master Tri-state Enable for pin 65, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT                                     1
+#define IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK                                      0x00000002U
+
+/*Master Tri-state Enable for pin 66, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT                                     2
+#define IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK                                      0x00000004U
+
+/*Master Tri-state Enable for pin 67, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT                                     3
+#define IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK                                      0x00000008U
+
+/*Master Tri-state Enable for pin 68, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT                                     4
+#define IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK                                      0x00000010U
+
+/*Master Tri-state Enable for pin 69, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT                                     5
+#define IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK                                      0x00000020U
+
+/*Master Tri-state Enable for pin 70, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT                                     6
+#define IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK                                      0x00000040U
+
+/*Master Tri-state Enable for pin 71, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT                                     7
+#define IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK                                      0x00000080U
+
+/*Master Tri-state Enable for pin 72, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT                                     8
+#define IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK                                      0x00000100U
+
+/*Master Tri-state Enable for pin 73, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT                                     9
+#define IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK                                      0x00000200U
+
+/*Master Tri-state Enable for pin 74, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT                                     10
+#define IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK                                      0x00000400U
+
+/*Master Tri-state Enable for pin 75, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT                                     11
+#define IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK                                      0x00000800U
+
+/*Master Tri-state Enable for pin 76, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT                                     12
+#define IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK                                      0x00001000U
+
+/*Master Tri-state Enable for pin 77, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT                                     13
+#define IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK                                      0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT                            0
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK                             0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT                            1
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK                             0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT                            2
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK                             0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT                            3
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK                             0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT                            4
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK                             0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT                            5
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK                             0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT                            6
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK                             0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT                            7
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK                             0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT                            8
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK                             0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT                            9
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK                             0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT                           10
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK                            0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT                           11
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK                            0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT                           12
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK                            0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT                           13
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK                            0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT                           14
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK                            0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT                           15
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK                            0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT                           16
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK                            0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT                           17
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK                            0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT                           18
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK                            0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT                           19
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK                            0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT                           20
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK                            0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT                           21
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK                            0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT                           22
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK                            0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT                           23
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK                            0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT                           24
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK                            0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT                           25
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK                            0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT                           0
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK                            0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT                           1
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK                            0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT                           2
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK                            0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT                           3
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK                            0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT                           4
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK                            0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT                           5
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK                            0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT                           6
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK                            0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT                           7
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK                            0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT                           8
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK                            0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT                           9
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK                            0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT                          10
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK                           0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT                          11
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK                           0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT                          12
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK                           0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT                          13
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK                           0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT                          14
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK                           0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT                          15
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK                           0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT                          16
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK                           0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT                          17
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK                           0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT                          18
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK                           0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT                          19
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK                           0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT                          20
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK                           0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT                          21
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK                           0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT                          22
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK                           0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT                          23
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK                           0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT                          24
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK                           0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT                          25
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK                           0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_SHIFT                               0
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_MASK                                0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_SHIFT                               1
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_MASK                                0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_SHIFT                               2
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_MASK                                0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_SHIFT                               3
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_MASK                                0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_SHIFT                               4
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_MASK                                0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_SHIFT                               5
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_MASK                                0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_SHIFT                               6
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_MASK                                0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_SHIFT                               7
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_MASK                                0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_SHIFT                               8
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_MASK                                0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_SHIFT                               9
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_MASK                                0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_SHIFT                              10
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_MASK                               0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_SHIFT                              11
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_MASK                               0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_SHIFT                              12
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_MASK                               0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_SHIFT                              13
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_MASK                               0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_SHIFT                              14
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_MASK                               0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_SHIFT                              15
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_MASK                               0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_SHIFT                              16
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_MASK                               0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_SHIFT                              17
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_MASK                               0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_SHIFT                              18
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_MASK                               0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_SHIFT                              19
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_MASK                               0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_SHIFT                              20
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_MASK                               0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_SHIFT                              21
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_MASK                               0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_SHIFT                              22
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_MASK                               0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_SHIFT                              23
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_MASK                               0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_SHIFT                              24
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_MASK                               0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_SHIFT                              25
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_MASK                               0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT                          0
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK                           0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT                          1
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK                           0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT                          2
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK                           0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT                          3
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK                           0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT                          4
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK                           0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT                          5
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK                           0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT                          6
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK                           0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT                          7
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK                           0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT                          8
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK                           0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT                          9
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK                           0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT                         10
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK                          0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT                         11
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK                          0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT                         12
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK                          0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT                         13
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK                          0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT                         14
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK                          0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT                         15
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK                          0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT                         16
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK                          0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT                         17
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK                          0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT                         18
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK                          0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT                         19
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK                          0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT                         20
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK                          0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT                         21
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK                          0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT                         22
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK                          0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT                         23
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK                          0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT                         24
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK                          0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT                         25
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK                          0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT                            0
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK                             0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT                            1
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK                             0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT                            2
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK                             0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT                            3
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK                             0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT                            4
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK                             0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT                            5
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK                             0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT                            6
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK                             0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT                            7
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK                             0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT                            8
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK                             0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT                            9
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK                             0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT                           10
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK                            0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT                           11
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK                            0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT                           12
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK                            0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT                           13
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK                            0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT                           14
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK                            0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT                           15
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK                            0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT                           16
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK                            0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT                           17
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK                            0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT                           18
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK                            0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT                           19
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK                            0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT                           20
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK                            0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT                           21
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK                            0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT                           22
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK                            0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT                           23
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK                            0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT                           24
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK                            0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT                           25
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK                            0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT                           0
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK                            0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT                           1
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK                            0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT                           2
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK                            0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT                           3
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK                            0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT                           4
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK                            0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT                           5
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK                            0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT                           6
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK                            0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT                           7
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK                            0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT                           8
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK                            0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT                           9
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK                            0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT                          10
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK                           0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT                          11
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK                           0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT                          12
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK                           0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT                          13
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK                           0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT                          14
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK                           0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT                          15
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK                           0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT                          16
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK                           0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT                          17
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK                           0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT                          18
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK                           0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT                          19
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK                           0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT                          20
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK                           0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT                          21
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK                           0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT                          22
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK                           0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT                          23
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK                           0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT                          24
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK                           0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT                          25
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK                           0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT                               0
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK                                0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT                               1
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK                                0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT                               2
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK                                0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT                               3
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK                                0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT                               4
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK                                0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT                               5
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK                                0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT                               6
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK                                0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT                               7
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK                                0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT                               8
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK                                0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT                               9
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK                                0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT                              10
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK                               0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT                              11
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK                               0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT                              12
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK                               0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT                              13
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK                               0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT                              14
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK                               0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT                              15
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK                               0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT                              16
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK                               0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT                              17
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK                               0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT                              18
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK                               0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT                              19
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK                               0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT                              20
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK                               0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT                              21
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK                               0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT                              22
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK                               0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT                              23
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK                               0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT                              24
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK                               0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT                              25
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK                               0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT                          0
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK                           0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT                          1
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK                           0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT                          2
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK                           0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT                          3
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK                           0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT                          4
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK                           0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT                          5
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK                           0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT                          6
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK                           0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT                          7
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK                           0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT                          8
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK                           0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT                          9
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK                           0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT                         10
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK                          0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT                         11
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK                          0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT                         12
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK                          0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT                         13
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK                          0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT                         14
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK                          0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT                         15
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK                          0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT                         16
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK                          0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT                         17
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK                          0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT                         18
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK                          0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT                         19
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK                          0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT                         20
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK                          0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT                         21
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK                          0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT                         22
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK                          0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT                         23
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK                          0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT                         24
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK                          0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT                         25
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK                          0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT                            0
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK                             0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT                            1
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK                             0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT                            2
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK                             0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT                            3
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK                             0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT                            4
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK                             0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT                            5
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK                             0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT                            6
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK                             0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT                            7
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK                             0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT                            8
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK                             0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT                            9
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK                             0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT                           10
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK                            0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT                           11
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK                            0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT                           12
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK                            0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT                           13
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK                            0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT                           14
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK                            0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT                           15
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK                            0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT                           16
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK                            0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT                           17
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK                            0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT                           18
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK                            0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT                           19
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK                            0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT                           20
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK                            0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT                           21
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK                            0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT                           22
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK                            0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT                           23
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK                            0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT                           24
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK                            0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT                           25
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK                            0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT                           0
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK                            0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT                           1
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK                            0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT                           2
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK                            0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT                           3
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK                            0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT                           4
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK                            0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT                           5
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK                            0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT                           6
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK                            0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT                           7
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK                            0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT                           8
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK                            0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT                           9
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK                            0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT                          10
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK                           0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT                          11
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK                           0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT                          12
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK                           0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT                          13
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK                           0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT                          14
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK                           0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT                          15
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK                           0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT                          16
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK                           0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT                          17
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK                           0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT                          18
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK                           0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT                          19
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK                           0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT                          20
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK                           0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT                          21
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK                           0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT                          22
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK                           0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT                          23
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK                           0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT                          24
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK                           0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT                          25
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK                           0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_SHIFT                               0
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_MASK                                0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_SHIFT                               1
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_MASK                                0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_SHIFT                               2
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_MASK                                0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_SHIFT                               3
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_MASK                                0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_SHIFT                               4
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_MASK                                0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_SHIFT                               5
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_MASK                                0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_SHIFT                               6
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_MASK                                0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_SHIFT                               7
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_MASK                                0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_SHIFT                               8
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_MASK                                0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_SHIFT                               9
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_MASK                                0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_SHIFT                              10
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_MASK                               0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_SHIFT                              11
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_MASK                               0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_SHIFT                              12
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_MASK                               0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_SHIFT                              13
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_MASK                               0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_SHIFT                              14
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_MASK                               0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_SHIFT                              15
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_MASK                               0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_SHIFT                              16
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_MASK                               0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_SHIFT                              17
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_MASK                               0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_SHIFT                              18
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_MASK                               0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_SHIFT                              19
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_MASK                               0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_SHIFT                              20
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_MASK                               0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_SHIFT                              21
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_MASK                               0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_SHIFT                              22
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_MASK                               0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_SHIFT                              23
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_MASK                               0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_SHIFT                              24
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_MASK                               0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_SHIFT                              25
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_MASK                               0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT                          0
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK                           0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT                          1
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK                           0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT                          2
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK                           0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT                          3
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK                           0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT                          4
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK                           0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT                          5
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK                           0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT                          6
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK                           0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT                          7
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK                           0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT                          8
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK                           0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT                          9
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK                           0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT                         10
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK                          0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT                         11
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK                          0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT                         12
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK                          0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT                         13
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK                          0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT                         14
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK                          0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT                         15
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK                          0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT                         16
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK                          0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT                         17
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK                          0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT                         18
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK                          0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT                         19
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK                          0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT                         20
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK                          0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT                         21
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK                          0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT                         22
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK                          0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT                         23
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK                          0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT                         24
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK                          0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT                         25
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK                          0x02000000U
+
+/*I2C Loopback Control. 0 = Connect I2C inputs according to MIO mapping. 1 = Loop I2C 0 outputs to I2C 1 inputs, and I2C 1 outp
+		ts to I2C 0 inputs.*/
+#undef IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_DEFVAL                                0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_SHIFT                                 3
+#define IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_MASK                                  0x00000008U
+
+/*CAN Loopback Control. 0 = Connect CAN inputs according to MIO mapping. 1 = Loop CAN 0 Tx to CAN 1 Rx, and CAN 1 Tx to CAN 0 R
+		.*/
+#undef IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_DEFVAL                                0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_SHIFT                                 2
+#define IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_MASK                                  0x00000004U
+
+/*UART Loopback Control. 0 = Connect UART inputs according to MIO mapping. 1 = Loop UART 0 outputs to UART 1 inputs, and UART 1
+		outputs to UART 0 inputs. RXD/TXD cross-connected. RTS/CTS cross-connected. DSR, DTR, DCD and RI not used.*/
+#undef IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_DEFVAL                                  0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_SHIFT                                   1
+#define IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_MASK                                    0x00000002U
+
+/*SPI Loopback Control. 0 = Connect SPI inputs according to MIO mapping. 1 = Loop SPI 0 outputs to SPI 1 inputs, and SPI 1 outp
+		ts to SPI 0 inputs. The other SPI core will appear on the LS Slave Select.*/
+#undef IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_DEFVAL                                0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT                                 0
+#define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK                                  0x00000001U
+#undef CRL_APB_RST_LPD_IOU0_OFFSET 
+#define CRL_APB_RST_LPD_IOU0_OFFSET                                                0XFF5E0230
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef IOU_SLCR_CTRL_REG_SD_OFFSET 
+#define IOU_SLCR_CTRL_REG_SD_OFFSET                                                0XFF180310
+#undef IOU_SLCR_SD_CONFIG_REG2_OFFSET 
+#define IOU_SLCR_SD_CONFIG_REG2_OFFSET                                             0XFF180320
+#undef IOU_SLCR_SD_CONFIG_REG1_OFFSET 
+#define IOU_SLCR_SD_CONFIG_REG1_OFFSET                                             0XFF18031C
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef UART0_BAUD_RATE_DIVIDER_REG0_OFFSET 
+#define UART0_BAUD_RATE_DIVIDER_REG0_OFFSET                                        0XFF000034
+#undef UART0_BAUD_RATE_GEN_REG0_OFFSET 
+#define UART0_BAUD_RATE_GEN_REG0_OFFSET                                            0XFF000018
+#undef UART0_CONTROL_REG0_OFFSET 
+#define UART0_CONTROL_REG0_OFFSET                                                  0XFF000000
+#undef UART0_MODE_REG0_OFFSET 
+#define UART0_MODE_REG0_OFFSET                                                     0XFF000004
+#undef UART1_BAUD_RATE_DIVIDER_REG0_OFFSET 
+#define UART1_BAUD_RATE_DIVIDER_REG0_OFFSET                                        0XFF010034
+#undef UART1_BAUD_RATE_GEN_REG0_OFFSET 
+#define UART1_BAUD_RATE_GEN_REG0_OFFSET                                            0XFF010018
+#undef UART1_CONTROL_REG0_OFFSET 
+#define UART1_CONTROL_REG0_OFFSET                                                  0XFF010000
+#undef UART1_MODE_REG0_OFFSET 
+#define UART1_MODE_REG0_OFFSET                                                     0XFF010004
+#undef LPD_SLCR_SECURE_SLCR_ADMA_OFFSET 
+#define LPD_SLCR_SECURE_SLCR_ADMA_OFFSET                                           0XFF4B0024
+#undef CSU_TAMPER_STATUS_OFFSET 
+#define CSU_TAMPER_STATUS_OFFSET                                                   0XFFCA5000
+#undef APU_ACE_CTRL_OFFSET 
+#define APU_ACE_CTRL_OFFSET                                                        0XFD5C0060
+#undef RTC_CONTROL_OFFSET 
+#define RTC_CONTROL_OFFSET                                                         0XFFA60040
+
+/*GEM 3 reset*/
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL                                     0x0000000F
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT                                      3
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK                                       0x00000008U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_QSPI_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_QSPI_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT                                      0
+#define CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK                                       0x00000001U
+
+/*USB 0 reset for control registers*/
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT                                   10
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK                                    0x00000400U
+
+/*USB 0 sleep circuit reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL                                 0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT                                  8
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK                                   0x00000100U
+
+/*USB 0 reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT                                   6
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK                                    0x00000040U
+
+/*PCIE config reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL                                  0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT                                   19
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK                                    0x00080000U
+
+/*PCIE control block level reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL                                 0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT                                  17
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK                                   0x00020000U
+
+/*PCIE bridge block level reset (AXI interface)*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL                               0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT                                18
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK                                 0x00040000U
+
+/*Display Port block level reset (includes DPDMA)*/
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT                                         16
+#define CRF_APB_RST_FPD_TOP_DP_RESET_MASK                                          0x00010000U
+
+/*FPD WDT reset*/
+#undef CRF_APB_RST_FPD_TOP_SWDT_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SWDT_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SWDT_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SWDT_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SWDT_RESET_SHIFT                                       15
+#define CRF_APB_RST_FPD_TOP_SWDT_RESET_MASK                                        0x00008000U
+
+/*GDMA block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GDMA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GDMA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GDMA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GDMA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GDMA_RESET_SHIFT                                       6
+#define CRF_APB_RST_FPD_TOP_GDMA_RESET_MASK                                        0x00000040U
+
+/*Pixel Processor (submodule of GPU) block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_DEFVAL                                   0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_SHIFT                                    4
+#define CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_MASK                                     0x00000010U
+
+/*Pixel Processor (submodule of GPU) block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_DEFVAL                                   0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_SHIFT                                    5
+#define CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_MASK                                     0x00000020U
+
+/*GPU block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GPU_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GPU_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GPU_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GPU_RESET_DEFVAL                                       0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GPU_RESET_SHIFT                                        3
+#define CRF_APB_RST_FPD_TOP_GPU_RESET_MASK                                         0x00000008U
+
+/*GT block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GT_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GT_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GT_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GT_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GT_RESET_SHIFT                                         2
+#define CRF_APB_RST_FPD_TOP_GT_RESET_MASK                                          0x00000004U
+
+/*Sata block level reset*/
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT                                       1
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_MASK                                        0x00000002U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_SDIO1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_SDIO1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_SDIO1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_SDIO1_RESET_DEFVAL                                    0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_SDIO1_RESET_SHIFT                                     6
+#define CRL_APB_RST_LPD_IOU2_SDIO1_RESET_MASK                                      0x00000040U
+
+/*SD or eMMC selection on SDIO1 0: SD enabled 1: eMMC enabled*/
+#undef IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_DEFVAL 
+#undef IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_SHIFT 
+#undef IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_MASK 
+#define IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_SHIFT                                    15
+#define IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_MASK                                     0x00008000U
+
+/*Should be set based on the final product usage 00 - Removable SCard Slot 01 - Embedded Slot for One Device 10 - Shared Bus Sl
+		t 11 - Reserved*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_DEFVAL                                0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_SHIFT                                 28
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_MASK                                  0x30000000U
+
+/*1.8V Support 1: 1.8V supported 0: 1.8V not supported support*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_DEFVAL                                    0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_SHIFT                                     25
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_MASK                                      0x02000000U
+
+/*3.0V Support 1: 3.0V supported 0: 3.0V not supported support*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_DEFVAL                                    0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_SHIFT                                     24
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_MASK                                      0x01000000U
+
+/*3.3V Support 1: 3.3V supported 0: 3.3V not supported support*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_DEFVAL                                    0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_SHIFT                                     23
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_MASK                                      0x00800000U
+
+/*Base Clock Frequency for SD Clock. This is the frequency of the xin_clk.*/
+#undef IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK 
+#define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_DEFVAL                                 0x32403240
+#define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT                                  23
+#define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK                                   0x7F800000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_CAN1_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT                                      8
+#define CRL_APB_RST_LPD_IOU2_CAN1_RESET_MASK                                       0x00000100U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_I2C0_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_I2C0_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_I2C0_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_I2C0_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_I2C0_RESET_SHIFT                                      9
+#define CRL_APB_RST_LPD_IOU2_I2C0_RESET_MASK                                       0x00000200U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_I2C1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_I2C1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_I2C1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_I2C1_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_I2C1_RESET_SHIFT                                      10
+#define CRL_APB_RST_LPD_IOU2_I2C1_RESET_MASK                                       0x00000400U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_SWDT_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_SWDT_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_SWDT_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_SWDT_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_SWDT_RESET_SHIFT                                      15
+#define CRL_APB_RST_LPD_IOU2_SWDT_RESET_MASK                                       0x00008000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC0_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC0_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC0_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC0_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC0_RESET_SHIFT                                      11
+#define CRL_APB_RST_LPD_IOU2_TTC0_RESET_MASK                                       0x00000800U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC1_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC1_RESET_SHIFT                                      12
+#define CRL_APB_RST_LPD_IOU2_TTC1_RESET_MASK                                       0x00001000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC2_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC2_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC2_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC2_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC2_RESET_SHIFT                                      13
+#define CRL_APB_RST_LPD_IOU2_TTC2_RESET_MASK                                       0x00002000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC3_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC3_RESET_SHIFT                                      14
+#define CRL_APB_RST_LPD_IOU2_TTC3_RESET_MASK                                       0x00004000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_UART0_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_UART0_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_UART0_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_UART0_RESET_DEFVAL                                    0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_UART0_RESET_SHIFT                                     1
+#define CRL_APB_RST_LPD_IOU2_UART0_RESET_MASK                                      0x00000002U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_UART1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_UART1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_UART1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_UART1_RESET_DEFVAL                                    0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_UART1_RESET_SHIFT                                     2
+#define CRL_APB_RST_LPD_IOU2_UART1_RESET_MASK                                      0x00000004U
+
+/*Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate*/
+#undef UART0_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL 
+#undef UART0_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT 
+#undef UART0_BAUD_RATE_DIVIDER_REG0_BDIV_MASK 
+#define UART0_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL                                   0x0000000F
+#define UART0_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT                                    0
+#define UART0_BAUD_RATE_DIVIDER_REG0_BDIV_MASK                                     0x000000FFU
+
+/*Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample*/
+#undef UART0_BAUD_RATE_GEN_REG0_CD_DEFVAL 
+#undef UART0_BAUD_RATE_GEN_REG0_CD_SHIFT 
+#undef UART0_BAUD_RATE_GEN_REG0_CD_MASK 
+#define UART0_BAUD_RATE_GEN_REG0_CD_DEFVAL                                         0x0000028B
+#define UART0_BAUD_RATE_GEN_REG0_CD_SHIFT                                          0
+#define UART0_BAUD_RATE_GEN_REG0_CD_MASK                                           0x0000FFFFU
+
+/*Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.*/
+#undef UART0_CONTROL_REG0_STPBRK_DEFVAL 
+#undef UART0_CONTROL_REG0_STPBRK_SHIFT 
+#undef UART0_CONTROL_REG0_STPBRK_MASK 
+#define UART0_CONTROL_REG0_STPBRK_DEFVAL                                           0x00000128
+#define UART0_CONTROL_REG0_STPBRK_SHIFT                                            8
+#define UART0_CONTROL_REG0_STPBRK_MASK                                             0x00000100U
+
+/*Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.*/
+#undef UART0_CONTROL_REG0_STTBRK_DEFVAL 
+#undef UART0_CONTROL_REG0_STTBRK_SHIFT 
+#undef UART0_CONTROL_REG0_STTBRK_MASK 
+#define UART0_CONTROL_REG0_STTBRK_DEFVAL                                           0x00000128
+#define UART0_CONTROL_REG0_STTBRK_SHIFT                                            7
+#define UART0_CONTROL_REG0_STTBRK_MASK                                             0x00000080U
+
+/*Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.*/
+#undef UART0_CONTROL_REG0_RSTTO_DEFVAL 
+#undef UART0_CONTROL_REG0_RSTTO_SHIFT 
+#undef UART0_CONTROL_REG0_RSTTO_MASK 
+#define UART0_CONTROL_REG0_RSTTO_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_RSTTO_SHIFT                                             6
+#define UART0_CONTROL_REG0_RSTTO_MASK                                              0x00000040U
+
+/*Transmit disable: 0: enable transmitter 1: disable transmitter*/
+#undef UART0_CONTROL_REG0_TXDIS_DEFVAL 
+#undef UART0_CONTROL_REG0_TXDIS_SHIFT 
+#undef UART0_CONTROL_REG0_TXDIS_MASK 
+#define UART0_CONTROL_REG0_TXDIS_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_TXDIS_SHIFT                                             5
+#define UART0_CONTROL_REG0_TXDIS_MASK                                              0x00000020U
+
+/*Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.*/
+#undef UART0_CONTROL_REG0_TXEN_DEFVAL 
+#undef UART0_CONTROL_REG0_TXEN_SHIFT 
+#undef UART0_CONTROL_REG0_TXEN_MASK 
+#define UART0_CONTROL_REG0_TXEN_DEFVAL                                             0x00000128
+#define UART0_CONTROL_REG0_TXEN_SHIFT                                              4
+#define UART0_CONTROL_REG0_TXEN_MASK                                               0x00000010U
+
+/*Receive disable: 0: enable 1: disable, regardless of the value of RXEN*/
+#undef UART0_CONTROL_REG0_RXDIS_DEFVAL 
+#undef UART0_CONTROL_REG0_RXDIS_SHIFT 
+#undef UART0_CONTROL_REG0_RXDIS_MASK 
+#define UART0_CONTROL_REG0_RXDIS_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_RXDIS_SHIFT                                             3
+#define UART0_CONTROL_REG0_RXDIS_MASK                                              0x00000008U
+
+/*Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.*/
+#undef UART0_CONTROL_REG0_RXEN_DEFVAL 
+#undef UART0_CONTROL_REG0_RXEN_SHIFT 
+#undef UART0_CONTROL_REG0_RXEN_MASK 
+#define UART0_CONTROL_REG0_RXEN_DEFVAL                                             0x00000128
+#define UART0_CONTROL_REG0_RXEN_SHIFT                                              2
+#define UART0_CONTROL_REG0_RXEN_MASK                                               0x00000004U
+
+/*Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.*/
+#undef UART0_CONTROL_REG0_TXRES_DEFVAL 
+#undef UART0_CONTROL_REG0_TXRES_SHIFT 
+#undef UART0_CONTROL_REG0_TXRES_MASK 
+#define UART0_CONTROL_REG0_TXRES_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_TXRES_SHIFT                                             1
+#define UART0_CONTROL_REG0_TXRES_MASK                                              0x00000002U
+
+/*Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.*/
+#undef UART0_CONTROL_REG0_RXRES_DEFVAL 
+#undef UART0_CONTROL_REG0_RXRES_SHIFT 
+#undef UART0_CONTROL_REG0_RXRES_MASK 
+#define UART0_CONTROL_REG0_RXRES_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_RXRES_SHIFT                                             0
+#define UART0_CONTROL_REG0_RXRES_MASK                                              0x00000001U
+
+/*Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback*/
+#undef UART0_MODE_REG0_CHMODE_DEFVAL 
+#undef UART0_MODE_REG0_CHMODE_SHIFT 
+#undef UART0_MODE_REG0_CHMODE_MASK 
+#define UART0_MODE_REG0_CHMODE_DEFVAL                                              0x00000000
+#define UART0_MODE_REG0_CHMODE_SHIFT                                               8
+#define UART0_MODE_REG0_CHMODE_MASK                                                0x00000300U
+
+/*Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved*/
+#undef UART0_MODE_REG0_NBSTOP_DEFVAL 
+#undef UART0_MODE_REG0_NBSTOP_SHIFT 
+#undef UART0_MODE_REG0_NBSTOP_MASK 
+#define UART0_MODE_REG0_NBSTOP_DEFVAL                                              0x00000000
+#define UART0_MODE_REG0_NBSTOP_SHIFT                                               6
+#define UART0_MODE_REG0_NBSTOP_MASK                                                0x000000C0U
+
+/*Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity*/
+#undef UART0_MODE_REG0_PAR_DEFVAL 
+#undef UART0_MODE_REG0_PAR_SHIFT 
+#undef UART0_MODE_REG0_PAR_MASK 
+#define UART0_MODE_REG0_PAR_DEFVAL                                                 0x00000000
+#define UART0_MODE_REG0_PAR_SHIFT                                                  3
+#define UART0_MODE_REG0_PAR_MASK                                                   0x00000038U
+
+/*Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits*/
+#undef UART0_MODE_REG0_CHRL_DEFVAL 
+#undef UART0_MODE_REG0_CHRL_SHIFT 
+#undef UART0_MODE_REG0_CHRL_MASK 
+#define UART0_MODE_REG0_CHRL_DEFVAL                                                0x00000000
+#define UART0_MODE_REG0_CHRL_SHIFT                                                 1
+#define UART0_MODE_REG0_CHRL_MASK                                                  0x00000006U
+
+/*Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8*/
+#undef UART0_MODE_REG0_CLKS_DEFVAL 
+#undef UART0_MODE_REG0_CLKS_SHIFT 
+#undef UART0_MODE_REG0_CLKS_MASK 
+#define UART0_MODE_REG0_CLKS_DEFVAL                                                0x00000000
+#define UART0_MODE_REG0_CLKS_SHIFT                                                 0
+#define UART0_MODE_REG0_CLKS_MASK                                                  0x00000001U
+
+/*Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate*/
+#undef UART1_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL 
+#undef UART1_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT 
+#undef UART1_BAUD_RATE_DIVIDER_REG0_BDIV_MASK 
+#define UART1_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL                                   0x0000000F
+#define UART1_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT                                    0
+#define UART1_BAUD_RATE_DIVIDER_REG0_BDIV_MASK                                     0x000000FFU
+
+/*Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample*/
+#undef UART1_BAUD_RATE_GEN_REG0_CD_DEFVAL 
+#undef UART1_BAUD_RATE_GEN_REG0_CD_SHIFT 
+#undef UART1_BAUD_RATE_GEN_REG0_CD_MASK 
+#define UART1_BAUD_RATE_GEN_REG0_CD_DEFVAL                                         0x0000028B
+#define UART1_BAUD_RATE_GEN_REG0_CD_SHIFT                                          0
+#define UART1_BAUD_RATE_GEN_REG0_CD_MASK                                           0x0000FFFFU
+
+/*Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.*/
+#undef UART1_CONTROL_REG0_STPBRK_DEFVAL 
+#undef UART1_CONTROL_REG0_STPBRK_SHIFT 
+#undef UART1_CONTROL_REG0_STPBRK_MASK 
+#define UART1_CONTROL_REG0_STPBRK_DEFVAL                                           0x00000128
+#define UART1_CONTROL_REG0_STPBRK_SHIFT                                            8
+#define UART1_CONTROL_REG0_STPBRK_MASK                                             0x00000100U
+
+/*Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.*/
+#undef UART1_CONTROL_REG0_STTBRK_DEFVAL 
+#undef UART1_CONTROL_REG0_STTBRK_SHIFT 
+#undef UART1_CONTROL_REG0_STTBRK_MASK 
+#define UART1_CONTROL_REG0_STTBRK_DEFVAL                                           0x00000128
+#define UART1_CONTROL_REG0_STTBRK_SHIFT                                            7
+#define UART1_CONTROL_REG0_STTBRK_MASK                                             0x00000080U
+
+/*Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.*/
+#undef UART1_CONTROL_REG0_RSTTO_DEFVAL 
+#undef UART1_CONTROL_REG0_RSTTO_SHIFT 
+#undef UART1_CONTROL_REG0_RSTTO_MASK 
+#define UART1_CONTROL_REG0_RSTTO_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_RSTTO_SHIFT                                             6
+#define UART1_CONTROL_REG0_RSTTO_MASK                                              0x00000040U
+
+/*Transmit disable: 0: enable transmitter 1: disable transmitter*/
+#undef UART1_CONTROL_REG0_TXDIS_DEFVAL 
+#undef UART1_CONTROL_REG0_TXDIS_SHIFT 
+#undef UART1_CONTROL_REG0_TXDIS_MASK 
+#define UART1_CONTROL_REG0_TXDIS_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_TXDIS_SHIFT                                             5
+#define UART1_CONTROL_REG0_TXDIS_MASK                                              0x00000020U
+
+/*Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.*/
+#undef UART1_CONTROL_REG0_TXEN_DEFVAL 
+#undef UART1_CONTROL_REG0_TXEN_SHIFT 
+#undef UART1_CONTROL_REG0_TXEN_MASK 
+#define UART1_CONTROL_REG0_TXEN_DEFVAL                                             0x00000128
+#define UART1_CONTROL_REG0_TXEN_SHIFT                                              4
+#define UART1_CONTROL_REG0_TXEN_MASK                                               0x00000010U
+
+/*Receive disable: 0: enable 1: disable, regardless of the value of RXEN*/
+#undef UART1_CONTROL_REG0_RXDIS_DEFVAL 
+#undef UART1_CONTROL_REG0_RXDIS_SHIFT 
+#undef UART1_CONTROL_REG0_RXDIS_MASK 
+#define UART1_CONTROL_REG0_RXDIS_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_RXDIS_SHIFT                                             3
+#define UART1_CONTROL_REG0_RXDIS_MASK                                              0x00000008U
+
+/*Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.*/
+#undef UART1_CONTROL_REG0_RXEN_DEFVAL 
+#undef UART1_CONTROL_REG0_RXEN_SHIFT 
+#undef UART1_CONTROL_REG0_RXEN_MASK 
+#define UART1_CONTROL_REG0_RXEN_DEFVAL                                             0x00000128
+#define UART1_CONTROL_REG0_RXEN_SHIFT                                              2
+#define UART1_CONTROL_REG0_RXEN_MASK                                               0x00000004U
+
+/*Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.*/
+#undef UART1_CONTROL_REG0_TXRES_DEFVAL 
+#undef UART1_CONTROL_REG0_TXRES_SHIFT 
+#undef UART1_CONTROL_REG0_TXRES_MASK 
+#define UART1_CONTROL_REG0_TXRES_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_TXRES_SHIFT                                             1
+#define UART1_CONTROL_REG0_TXRES_MASK                                              0x00000002U
+
+/*Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.*/
+#undef UART1_CONTROL_REG0_RXRES_DEFVAL 
+#undef UART1_CONTROL_REG0_RXRES_SHIFT 
+#undef UART1_CONTROL_REG0_RXRES_MASK 
+#define UART1_CONTROL_REG0_RXRES_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_RXRES_SHIFT                                             0
+#define UART1_CONTROL_REG0_RXRES_MASK                                              0x00000001U
+
+/*Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback*/
+#undef UART1_MODE_REG0_CHMODE_DEFVAL 
+#undef UART1_MODE_REG0_CHMODE_SHIFT 
+#undef UART1_MODE_REG0_CHMODE_MASK 
+#define UART1_MODE_REG0_CHMODE_DEFVAL                                              0x00000000
+#define UART1_MODE_REG0_CHMODE_SHIFT                                               8
+#define UART1_MODE_REG0_CHMODE_MASK                                                0x00000300U
+
+/*Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved*/
+#undef UART1_MODE_REG0_NBSTOP_DEFVAL 
+#undef UART1_MODE_REG0_NBSTOP_SHIFT 
+#undef UART1_MODE_REG0_NBSTOP_MASK 
+#define UART1_MODE_REG0_NBSTOP_DEFVAL                                              0x00000000
+#define UART1_MODE_REG0_NBSTOP_SHIFT                                               6
+#define UART1_MODE_REG0_NBSTOP_MASK                                                0x000000C0U
+
+/*Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity*/
+#undef UART1_MODE_REG0_PAR_DEFVAL 
+#undef UART1_MODE_REG0_PAR_SHIFT 
+#undef UART1_MODE_REG0_PAR_MASK 
+#define UART1_MODE_REG0_PAR_DEFVAL                                                 0x00000000
+#define UART1_MODE_REG0_PAR_SHIFT                                                  3
+#define UART1_MODE_REG0_PAR_MASK                                                   0x00000038U
+
+/*Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits*/
+#undef UART1_MODE_REG0_CHRL_DEFVAL 
+#undef UART1_MODE_REG0_CHRL_SHIFT 
+#undef UART1_MODE_REG0_CHRL_MASK 
+#define UART1_MODE_REG0_CHRL_DEFVAL                                                0x00000000
+#define UART1_MODE_REG0_CHRL_SHIFT                                                 1
+#define UART1_MODE_REG0_CHRL_MASK                                                  0x00000006U
+
+/*Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8*/
+#undef UART1_MODE_REG0_CLKS_DEFVAL 
+#undef UART1_MODE_REG0_CLKS_SHIFT 
+#undef UART1_MODE_REG0_CLKS_MASK 
+#define UART1_MODE_REG0_CLKS_DEFVAL                                                0x00000000
+#define UART1_MODE_REG0_CLKS_SHIFT                                                 0
+#define UART1_MODE_REG0_CLKS_MASK                                                  0x00000001U
+
+/*TrustZone Classification for ADMA*/
+#undef LPD_SLCR_SECURE_SLCR_ADMA_TZ_DEFVAL 
+#undef LPD_SLCR_SECURE_SLCR_ADMA_TZ_SHIFT 
+#undef LPD_SLCR_SECURE_SLCR_ADMA_TZ_MASK 
+#define LPD_SLCR_SECURE_SLCR_ADMA_TZ_DEFVAL                                        
+#define LPD_SLCR_SECURE_SLCR_ADMA_TZ_SHIFT                                         0
+#define LPD_SLCR_SECURE_SLCR_ADMA_TZ_MASK                                          0x000000FFU
+
+/*CSU regsiter*/
+#undef CSU_TAMPER_STATUS_TAMPER_0_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_0_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_0_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_0_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_0_SHIFT                                           0
+#define CSU_TAMPER_STATUS_TAMPER_0_MASK                                            0x00000001U
+
+/*External MIO*/
+#undef CSU_TAMPER_STATUS_TAMPER_1_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_1_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_1_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_1_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_1_SHIFT                                           1
+#define CSU_TAMPER_STATUS_TAMPER_1_MASK                                            0x00000002U
+
+/*JTAG toggle detect*/
+#undef CSU_TAMPER_STATUS_TAMPER_2_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_2_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_2_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_2_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_2_SHIFT                                           2
+#define CSU_TAMPER_STATUS_TAMPER_2_MASK                                            0x00000004U
+
+/*PL SEU error*/
+#undef CSU_TAMPER_STATUS_TAMPER_3_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_3_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_3_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_3_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_3_SHIFT                                           3
+#define CSU_TAMPER_STATUS_TAMPER_3_MASK                                            0x00000008U
+
+/*AMS over temperature alarm for LPD*/
+#undef CSU_TAMPER_STATUS_TAMPER_4_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_4_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_4_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_4_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_4_SHIFT                                           4
+#define CSU_TAMPER_STATUS_TAMPER_4_MASK                                            0x00000010U
+
+/*AMS over temperature alarm for APU*/
+#undef CSU_TAMPER_STATUS_TAMPER_5_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_5_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_5_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_5_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_5_SHIFT                                           5
+#define CSU_TAMPER_STATUS_TAMPER_5_MASK                                            0x00000020U
+
+/*AMS voltage alarm for VCCPINT_FPD*/
+#undef CSU_TAMPER_STATUS_TAMPER_6_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_6_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_6_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_6_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_6_SHIFT                                           6
+#define CSU_TAMPER_STATUS_TAMPER_6_MASK                                            0x00000040U
+
+/*AMS voltage alarm for VCCPINT_LPD*/
+#undef CSU_TAMPER_STATUS_TAMPER_7_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_7_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_7_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_7_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_7_SHIFT                                           7
+#define CSU_TAMPER_STATUS_TAMPER_7_MASK                                            0x00000080U
+
+/*AMS voltage alarm for VCCPAUX*/
+#undef CSU_TAMPER_STATUS_TAMPER_8_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_8_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_8_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_8_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_8_SHIFT                                           8
+#define CSU_TAMPER_STATUS_TAMPER_8_MASK                                            0x00000100U
+
+/*AMS voltage alarm for DDRPHY*/
+#undef CSU_TAMPER_STATUS_TAMPER_9_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_9_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_9_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_9_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_9_SHIFT                                           9
+#define CSU_TAMPER_STATUS_TAMPER_9_MASK                                            0x00000200U
+
+/*AMS voltage alarm for PSIO bank 0/1/2*/
+#undef CSU_TAMPER_STATUS_TAMPER_10_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_10_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_10_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_10_DEFVAL                                         0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_10_SHIFT                                          10
+#define CSU_TAMPER_STATUS_TAMPER_10_MASK                                           0x00000400U
+
+/*AMS voltage alarm for PSIO bank 3 (dedicated pins)*/
+#undef CSU_TAMPER_STATUS_TAMPER_11_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_11_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_11_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_11_DEFVAL                                         0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_11_SHIFT                                          11
+#define CSU_TAMPER_STATUS_TAMPER_11_MASK                                           0x00000800U
+
+/*AMS voltaage alarm for GT*/
+#undef CSU_TAMPER_STATUS_TAMPER_12_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_12_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_12_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_12_DEFVAL                                         0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_12_SHIFT                                          12
+#define CSU_TAMPER_STATUS_TAMPER_12_MASK                                           0x00001000U
+
+/*Set ACE outgoing AWQOS value*/
+#undef APU_ACE_CTRL_AWQOS_DEFVAL 
+#undef APU_ACE_CTRL_AWQOS_SHIFT 
+#undef APU_ACE_CTRL_AWQOS_MASK 
+#define APU_ACE_CTRL_AWQOS_DEFVAL                                                  0x000F000F
+#define APU_ACE_CTRL_AWQOS_SHIFT                                                   16
+#define APU_ACE_CTRL_AWQOS_MASK                                                    0x000F0000U
+
+/*Set ACE outgoing ARQOS value*/
+#undef APU_ACE_CTRL_ARQOS_DEFVAL 
+#undef APU_ACE_CTRL_ARQOS_SHIFT 
+#undef APU_ACE_CTRL_ARQOS_MASK 
+#define APU_ACE_CTRL_ARQOS_DEFVAL                                                  0x000F000F
+#define APU_ACE_CTRL_ARQOS_SHIFT                                                   0
+#define APU_ACE_CTRL_ARQOS_MASK                                                    0x0000000FU
+
+/*Enables the RTC. By writing a 0 to this bit, RTC will be powered off and the only module that potentially draws current from 
+		he battery will be BBRAM. The value read through this bit does not necessarily reflect whether RTC is enabled or not. It is e
+		pected that RTC is enabled every time it is being configured. If RTC is not used in the design, FSBL will disable it by writi
+		g a 0 to this bit.*/
+#undef RTC_CONTROL_BATTERY_DISABLE_DEFVAL 
+#undef RTC_CONTROL_BATTERY_DISABLE_SHIFT 
+#undef RTC_CONTROL_BATTERY_DISABLE_MASK 
+#define RTC_CONTROL_BATTERY_DISABLE_DEFVAL                                         0x01000000
+#define RTC_CONTROL_BATTERY_DISABLE_SHIFT                                          31
+#define RTC_CONTROL_BATTERY_DISABLE_MASK                                           0x80000000U
+#undef SERDES_PLL_REF_SEL0_OFFSET 
+#define SERDES_PLL_REF_SEL0_OFFSET                                                 0XFD410000
+#undef SERDES_PLL_REF_SEL1_OFFSET 
+#define SERDES_PLL_REF_SEL1_OFFSET                                                 0XFD410004
+#undef SERDES_PLL_REF_SEL2_OFFSET 
+#define SERDES_PLL_REF_SEL2_OFFSET                                                 0XFD410008
+#undef SERDES_PLL_REF_SEL3_OFFSET 
+#define SERDES_PLL_REF_SEL3_OFFSET                                                 0XFD41000C
+#undef SERDES_L0_L0_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L0_REF_CLK_SEL_OFFSET                                            0XFD402860
+#undef SERDES_L0_L1_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L1_REF_CLK_SEL_OFFSET                                            0XFD402864
+#undef SERDES_L0_L2_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L2_REF_CLK_SEL_OFFSET                                            0XFD402868
+#undef SERDES_L0_L3_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L3_REF_CLK_SEL_OFFSET                                            0XFD40286C
+#undef SERDES_L2_TM_PLL_DIG_37_OFFSET 
+#define SERDES_L2_TM_PLL_DIG_37_OFFSET                                             0XFD40A094
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_OFFSET                                        0XFD40A368
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_OFFSET                                        0XFD40A36C
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET                                        0XFD40E368
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET                                        0XFD40E36C
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET                                        0XFD406368
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET                                        0XFD40636C
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET                                    0XFD406370
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET                                        0XFD406374
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET                                        0XFD406378
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_OFFSET                                    0XFD40637C
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_OFFSET                                    0XFD40A370
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_OFFSET                                        0XFD40A374
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_OFFSET                                        0XFD40A378
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_OFFSET                                    0XFD40A37C
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET                                    0XFD40E370
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET                                        0XFD40E374
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET                                        0XFD40E378
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_OFFSET                                    0XFD40E37C
+#undef SERDES_L2_TM_DIG_6_OFFSET 
+#define SERDES_L2_TM_DIG_6_OFFSET                                                  0XFD40906C
+#undef SERDES_L2_TX_DIG_TM_61_OFFSET 
+#define SERDES_L2_TX_DIG_TM_61_OFFSET                                              0XFD4080F4
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_OFFSET 
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_OFFSET                                      0XFD40E360
+#undef SERDES_L3_TM_DIG_6_OFFSET 
+#define SERDES_L3_TM_DIG_6_OFFSET                                                  0XFD40D06C
+#undef SERDES_L3_TX_DIG_TM_61_OFFSET 
+#define SERDES_L3_TX_DIG_TM_61_OFFSET                                              0XFD40C0F4
+#undef SERDES_L3_TXPMA_ST_0_OFFSET 
+#define SERDES_L3_TXPMA_ST_0_OFFSET                                                0XFD40CB00
+#undef SERDES_ICM_CFG0_OFFSET 
+#define SERDES_ICM_CFG0_OFFSET                                                     0XFD410010
+#undef SERDES_ICM_CFG1_OFFSET 
+#define SERDES_ICM_CFG1_OFFSET                                                     0XFD410014
+#undef SERDES_L1_TXPMD_TM_45_OFFSET 
+#define SERDES_L1_TXPMD_TM_45_OFFSET                                               0XFD404CB4
+#undef SERDES_L1_TX_ANA_TM_118_OFFSET 
+#define SERDES_L1_TX_ANA_TM_118_OFFSET                                             0XFD4041D8
+#undef SERDES_L1_TXPMD_TM_48_OFFSET 
+#define SERDES_L1_TXPMD_TM_48_OFFSET                                               0XFD404CC0
+#undef SERDES_L1_TX_ANA_TM_18_OFFSET 
+#define SERDES_L1_TX_ANA_TM_18_OFFSET                                              0XFD404048
+
+/*PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL0_PLLREFSEL0_DEFVAL 
+#undef SERDES_PLL_REF_SEL0_PLLREFSEL0_SHIFT 
+#undef SERDES_PLL_REF_SEL0_PLLREFSEL0_MASK 
+#define SERDES_PLL_REF_SEL0_PLLREFSEL0_DEFVAL                                      0x0000000D
+#define SERDES_PLL_REF_SEL0_PLLREFSEL0_SHIFT                                       0
+#define SERDES_PLL_REF_SEL0_PLLREFSEL0_MASK                                        0x0000001FU
+
+/*PLL1 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL1_PLLREFSEL1_DEFVAL 
+#undef SERDES_PLL_REF_SEL1_PLLREFSEL1_SHIFT 
+#undef SERDES_PLL_REF_SEL1_PLLREFSEL1_MASK 
+#define SERDES_PLL_REF_SEL1_PLLREFSEL1_DEFVAL                                      0x00000008
+#define SERDES_PLL_REF_SEL1_PLLREFSEL1_SHIFT                                       0
+#define SERDES_PLL_REF_SEL1_PLLREFSEL1_MASK                                        0x0000001FU
+
+/*PLL2 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL2_PLLREFSEL2_DEFVAL 
+#undef SERDES_PLL_REF_SEL2_PLLREFSEL2_SHIFT 
+#undef SERDES_PLL_REF_SEL2_PLLREFSEL2_MASK 
+#define SERDES_PLL_REF_SEL2_PLLREFSEL2_DEFVAL                                      0x0000000F
+#define SERDES_PLL_REF_SEL2_PLLREFSEL2_SHIFT                                       0
+#define SERDES_PLL_REF_SEL2_PLLREFSEL2_MASK                                        0x0000001FU
+
+/*PLL3 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL3_PLLREFSEL3_DEFVAL 
+#undef SERDES_PLL_REF_SEL3_PLLREFSEL3_SHIFT 
+#undef SERDES_PLL_REF_SEL3_PLLREFSEL3_MASK 
+#define SERDES_PLL_REF_SEL3_PLLREFSEL3_DEFVAL                                      0x0000000E
+#define SERDES_PLL_REF_SEL3_PLLREFSEL3_SHIFT                                       0
+#define SERDES_PLL_REF_SEL3_PLLREFSEL3_MASK                                        0x0000001FU
+
+/*Sel of lane 0 ref clock local mux. Set to 1 to select lane 0 slicer output. Set to 0 to select lane0 ref clock mux output.*/
+#undef SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Sel of lane 1 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane1 ref clock mux output.*/
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Bit 3 of lane 1 ref clock mux one hot sel. Set to 1 to select lane 3 slicer output from ref clock network*/
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_DEFVAL 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_SHIFT 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_MASK 
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_DEFVAL                           0x00000080
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_SHIFT                            3
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_MASK                             0x00000008U
+
+/*Sel of lane 2 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane2 ref clock mux output.*/
+#undef SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Sel of lane 3 ref clock local mux. Set to 1 to select lane 3 slicer output. Set to 0 to select lane3 ref clock mux output.*/
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Bit 1 of lane 3 ref clock mux one hot sel. Set to 1 to select lane 1 slicer output from ref clock network*/
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_DEFVAL 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_SHIFT 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_MASK 
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_DEFVAL                           0x00000080
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_SHIFT                            1
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_MASK                             0x00000002U
+
+/*Enable/Disable coarse code satureation limiting logic*/
+#undef SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_DEFVAL 
+#undef SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_SHIFT 
+#undef SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_MASK 
+#define SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_DEFVAL                 0x00000000
+#define SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_SHIFT                  4
+#define SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_MASK                   0x00000010U
+
+/*Spread Spectrum No of Steps [7:0]*/
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK 
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL                  0x00000000
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT                   0
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK                    0x000000FFU
+
+/*Spread Spectrum No of Steps [10:8]*/
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK 
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL                  0x00000000
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT                   0
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK                    0x00000007U
+
+/*Spread Spectrum No of Steps [7:0]*/
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK 
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL                  0x00000000
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT                   0
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK                    0x000000FFU
+
+/*Spread Spectrum No of Steps [10:8]*/
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK 
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL                  0x00000000
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT                   0
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK                    0x00000007U
+
+/*Spread Spectrum No of Steps [7:0]*/
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK 
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL                  0x00000000
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT                   0
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK                    0x000000FFU
+
+/*Spread Spectrum No of Steps [10:8]*/
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK 
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL                  0x00000000
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT                   0
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK                    0x00000007U
+
+/*Step Size for Spread Spectrum [7:0]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL                 0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT                  0
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK                   0x000000FFU
+
+/*Step Size for Spread Spectrum [15:8]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL                         0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT                          0
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [23:16]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL                         0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT                          0
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [25:24]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL                 0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT                  0
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK                   0x00000003U
+
+/*Enable/Disable test mode force on SS step size*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL                 0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT                  4
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK                   0x00000010U
+
+/*Enable/Disable test mode force on SS no of steps*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL              0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT               5
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK                0x00000020U
+
+/*Step Size for Spread Spectrum [7:0]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL                 0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT                  0
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK                   0x000000FFU
+
+/*Step Size for Spread Spectrum [15:8]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL                         0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT                          0
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [23:16]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL                         0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT                          0
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [25:24]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL                 0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT                  0
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK                   0x00000003U
+
+/*Enable/Disable test mode force on SS step size*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL                 0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT                  4
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK                   0x00000010U
+
+/*Enable/Disable test mode force on SS no of steps*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL              0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT               5
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK                0x00000020U
+
+/*Step Size for Spread Spectrum [7:0]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL                 0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT                  0
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK                   0x000000FFU
+
+/*Step Size for Spread Spectrum [15:8]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL                         0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT                          0
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [23:16]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL                         0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT                          0
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [25:24]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL                 0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT                  0
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK                   0x00000003U
+
+/*Enable/Disable test mode force on SS step size*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL                 0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT                  4
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK                   0x00000010U
+
+/*Enable/Disable test mode force on SS no of steps*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL              0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT               5
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK                0x00000020U
+
+/*Enable test mode forcing on enable Spread Spectrum*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_DEFVAL                     0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_SHIFT                      7
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_MASK                       0x00000080U
+
+/*Bypass Descrambler*/
+#undef SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_MASK 
+#define SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_DEFVAL                                   0x00000000
+#define SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_SHIFT                                    1
+#define SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_MASK                                     0x00000002U
+
+/*Enable Bypass for <1> TM_DIG_CTRL_6*/
+#undef SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK 
+#define SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL                             0x00000000
+#define SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT                              0
+#define SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK                               0x00000001U
+
+/*Bypass scrambler signal*/
+#undef SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_MASK 
+#define SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL                                 0x00000000
+#define SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT                                  1
+#define SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_MASK                                   0x00000002U
+
+/*Enable/disable scrambler bypass signal*/
+#undef SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK 
+#define SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL                           0x00000000
+#define SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT                            0
+#define SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK                             0x00000001U
+
+/*Enable test mode force on fractional mode enable*/
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_DEFVAL 
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_SHIFT 
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_MASK 
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_DEFVAL                     0x00000000
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_SHIFT                      6
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_MASK                       0x00000040U
+
+/*Bypass 8b10b decoder*/
+#undef SERDES_L3_TM_DIG_6_BYPASS_DECODER_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DECODER_SHIFT 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DECODER_MASK 
+#define SERDES_L3_TM_DIG_6_BYPASS_DECODER_DEFVAL                                   0x00000000
+#define SERDES_L3_TM_DIG_6_BYPASS_DECODER_SHIFT                                    3
+#define SERDES_L3_TM_DIG_6_BYPASS_DECODER_MASK                                     0x00000008U
+
+/*Enable Bypass for <3> TM_DIG_CTRL_6*/
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_SHIFT 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_MASK 
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_DEFVAL                                 0x00000000
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_SHIFT                                  2
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_MASK                                   0x00000004U
+
+/*Bypass Descrambler*/
+#undef SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_MASK 
+#define SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_DEFVAL                                   0x00000000
+#define SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_SHIFT                                    1
+#define SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_MASK                                     0x00000002U
+
+/*Enable Bypass for <1> TM_DIG_CTRL_6*/
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK 
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL                             0x00000000
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT                              0
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK                               0x00000001U
+
+/*Enable/disable encoder bypass signal*/
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_DEFVAL 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_SHIFT 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_MASK 
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_DEFVAL                                   0x00000000
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_SHIFT                                    3
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_MASK                                     0x00000008U
+
+/*Bypass scrambler signal*/
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_MASK 
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL                                 0x00000000
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT                                  1
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_MASK                                   0x00000002U
+
+/*Enable/disable scrambler bypass signal*/
+#undef SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK 
+#define SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL                           0x00000000
+#define SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT                            0
+#define SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK                             0x00000001U
+
+/*PHY Mode: 4'b000 - PCIe, 4'b001 - USB3, 4'b0010 - SATA, 4'b0100 - SGMII, 4'b0101 - DP, 4'b1000 - MPHY*/
+#undef SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_DEFVAL 
+#undef SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT 
+#undef SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK 
+#define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_DEFVAL                                    0x00000001
+#define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT                                     4
+#define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK                                      0x000000F0U
+
+/*Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse
+		, 7 - Unused*/
+#undef SERDES_ICM_CFG0_L0_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG0_L0_ICM_CFG_MASK 
+#define SERDES_ICM_CFG0_L0_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT                                           0
+#define SERDES_ICM_CFG0_L0_ICM_CFG_MASK                                            0x00000007U
+
+/*Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused
+		 7 - Unused*/
+#undef SERDES_ICM_CFG0_L1_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG0_L1_ICM_CFG_MASK 
+#define SERDES_ICM_CFG0_L1_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT                                           4
+#define SERDES_ICM_CFG0_L1_ICM_CFG_MASK                                            0x00000070U
+
+/*Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused
+		 7 - Unused*/
+#undef SERDES_ICM_CFG1_L2_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG1_L2_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG1_L2_ICM_CFG_MASK 
+#define SERDES_ICM_CFG1_L2_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG1_L2_ICM_CFG_SHIFT                                           0
+#define SERDES_ICM_CFG1_L2_ICM_CFG_MASK                                            0x00000007U
+
+/*Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused
+		 7 - Unused*/
+#undef SERDES_ICM_CFG1_L3_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG1_L3_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG1_L3_ICM_CFG_MASK 
+#define SERDES_ICM_CFG1_L3_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG1_L3_ICM_CFG_SHIFT                                           4
+#define SERDES_ICM_CFG1_L3_ICM_CFG_MASK                                            0x00000070U
+
+/*Enable/disable DP post2 path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_DEFVAL                 0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT                  5
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK                   0x00000020U
+
+/*Override enable/disable of DP post2 path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_DEFVAL            0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT             4
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK              0x00000010U
+
+/*Override enable/disable of DP post1 path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_DEFVAL            0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT             2
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK              0x00000004U
+
+/*Enable/disable DP main path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_DEFVAL                  0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT                   1
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK                    0x00000002U
+
+/*Override enable/disable of DP main path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_DEFVAL             0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT              0
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK               0x00000001U
+
+/*Test register force for enabling/disablign TX deemphasis bits <17:0>*/
+#undef SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL 
+#undef SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT 
+#undef SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK 
+#define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL                        0x00000000
+#define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT                         0
+#define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK                          0x00000001U
+
+/*Margining factor value*/
+#undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT 
+#undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_MASK 
+#define SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_DEFVAL                 0x00000000
+#define SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT                  0
+#define SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_MASK                   0x0000001FU
+
+/*pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved*/
+#undef SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL 
+#undef SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT 
+#undef SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK 
+#define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL                           0x00000002
+#define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT                            0
+#define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK                             0x000000FFU
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef USB3_0_FPD_POWER_PRSNT_OFFSET 
+#define USB3_0_FPD_POWER_PRSNT_OFFSET                                              0XFF9D0080
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef CRL_APB_RST_LPD_IOU0_OFFSET 
+#define CRL_APB_RST_LPD_IOU0_OFFSET                                                0XFF5E0230
+#undef SIOU_SATA_MISC_CTRL_OFFSET 
+#define SIOU_SATA_MISC_CTRL_OFFSET                                                 0XFD3D0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef DP_DP_PHY_RESET_OFFSET 
+#define DP_DP_PHY_RESET_OFFSET                                                     0XFD4A0200
+#undef DP_DP_TX_PHY_POWER_DOWN_OFFSET 
+#define DP_DP_TX_PHY_POWER_DOWN_OFFSET                                             0XFD4A0238
+#undef USB3_0_XHCI_GUSB2PHYCFG_OFFSET 
+#define USB3_0_XHCI_GUSB2PHYCFG_OFFSET                                             0XFE20C200
+#undef USB3_0_XHCI_GFLADJ_OFFSET 
+#define USB3_0_XHCI_GFLADJ_OFFSET                                                  0XFE20C630
+#undef PCIE_ATTRIB_ATTR_37_OFFSET 
+#define PCIE_ATTRIB_ATTR_37_OFFSET                                                 0XFD480094
+#undef PCIE_ATTRIB_ATTR_25_OFFSET 
+#define PCIE_ATTRIB_ATTR_25_OFFSET                                                 0XFD480064
+#undef PCIE_ATTRIB_ATTR_7_OFFSET 
+#define PCIE_ATTRIB_ATTR_7_OFFSET                                                  0XFD48001C
+#undef PCIE_ATTRIB_ATTR_8_OFFSET 
+#define PCIE_ATTRIB_ATTR_8_OFFSET                                                  0XFD480020
+#undef PCIE_ATTRIB_ATTR_9_OFFSET 
+#define PCIE_ATTRIB_ATTR_9_OFFSET                                                  0XFD480024
+#undef PCIE_ATTRIB_ATTR_10_OFFSET 
+#define PCIE_ATTRIB_ATTR_10_OFFSET                                                 0XFD480028
+#undef PCIE_ATTRIB_ATTR_11_OFFSET 
+#define PCIE_ATTRIB_ATTR_11_OFFSET                                                 0XFD48002C
+#undef PCIE_ATTRIB_ATTR_12_OFFSET 
+#define PCIE_ATTRIB_ATTR_12_OFFSET                                                 0XFD480030
+#undef PCIE_ATTRIB_ATTR_13_OFFSET 
+#define PCIE_ATTRIB_ATTR_13_OFFSET                                                 0XFD480034
+#undef PCIE_ATTRIB_ATTR_14_OFFSET 
+#define PCIE_ATTRIB_ATTR_14_OFFSET                                                 0XFD480038
+#undef PCIE_ATTRIB_ATTR_15_OFFSET 
+#define PCIE_ATTRIB_ATTR_15_OFFSET                                                 0XFD48003C
+#undef PCIE_ATTRIB_ATTR_16_OFFSET 
+#define PCIE_ATTRIB_ATTR_16_OFFSET                                                 0XFD480040
+#undef PCIE_ATTRIB_ATTR_17_OFFSET 
+#define PCIE_ATTRIB_ATTR_17_OFFSET                                                 0XFD480044
+#undef PCIE_ATTRIB_ATTR_18_OFFSET 
+#define PCIE_ATTRIB_ATTR_18_OFFSET                                                 0XFD480048
+#undef PCIE_ATTRIB_ATTR_27_OFFSET 
+#define PCIE_ATTRIB_ATTR_27_OFFSET                                                 0XFD48006C
+#undef PCIE_ATTRIB_ATTR_50_OFFSET 
+#define PCIE_ATTRIB_ATTR_50_OFFSET                                                 0XFD4800C8
+#undef PCIE_ATTRIB_ATTR_105_OFFSET 
+#define PCIE_ATTRIB_ATTR_105_OFFSET                                                0XFD4801A4
+#undef PCIE_ATTRIB_ATTR_106_OFFSET 
+#define PCIE_ATTRIB_ATTR_106_OFFSET                                                0XFD4801A8
+#undef PCIE_ATTRIB_ATTR_107_OFFSET 
+#define PCIE_ATTRIB_ATTR_107_OFFSET                                                0XFD4801AC
+#undef PCIE_ATTRIB_ATTR_108_OFFSET 
+#define PCIE_ATTRIB_ATTR_108_OFFSET                                                0XFD4801B0
+#undef PCIE_ATTRIB_ATTR_109_OFFSET 
+#define PCIE_ATTRIB_ATTR_109_OFFSET                                                0XFD4801B4
+#undef PCIE_ATTRIB_ATTR_34_OFFSET 
+#define PCIE_ATTRIB_ATTR_34_OFFSET                                                 0XFD480088
+#undef PCIE_ATTRIB_ATTR_53_OFFSET 
+#define PCIE_ATTRIB_ATTR_53_OFFSET                                                 0XFD4800D4
+#undef PCIE_ATTRIB_ATTR_41_OFFSET 
+#define PCIE_ATTRIB_ATTR_41_OFFSET                                                 0XFD4800A4
+#undef PCIE_ATTRIB_ATTR_97_OFFSET 
+#define PCIE_ATTRIB_ATTR_97_OFFSET                                                 0XFD480184
+#undef PCIE_ATTRIB_ATTR_100_OFFSET 
+#define PCIE_ATTRIB_ATTR_100_OFFSET                                                0XFD480190
+#undef PCIE_ATTRIB_ATTR_101_OFFSET 
+#define PCIE_ATTRIB_ATTR_101_OFFSET                                                0XFD480194
+#undef PCIE_ATTRIB_ATTR_37_OFFSET 
+#define PCIE_ATTRIB_ATTR_37_OFFSET                                                 0XFD480094
+#undef PCIE_ATTRIB_ATTR_93_OFFSET 
+#define PCIE_ATTRIB_ATTR_93_OFFSET                                                 0XFD480174
+#undef PCIE_ATTRIB_ID_OFFSET 
+#define PCIE_ATTRIB_ID_OFFSET                                                      0XFD480200
+#undef PCIE_ATTRIB_SUBSYS_ID_OFFSET 
+#define PCIE_ATTRIB_SUBSYS_ID_OFFSET                                               0XFD480204
+#undef PCIE_ATTRIB_REV_ID_OFFSET 
+#define PCIE_ATTRIB_REV_ID_OFFSET                                                  0XFD480208
+#undef PCIE_ATTRIB_ATTR_24_OFFSET 
+#define PCIE_ATTRIB_ATTR_24_OFFSET                                                 0XFD480060
+#undef PCIE_ATTRIB_ATTR_25_OFFSET 
+#define PCIE_ATTRIB_ATTR_25_OFFSET                                                 0XFD480064
+#undef PCIE_ATTRIB_ATTR_4_OFFSET 
+#define PCIE_ATTRIB_ATTR_4_OFFSET                                                  0XFD480010
+#undef PCIE_ATTRIB_ATTR_89_OFFSET 
+#define PCIE_ATTRIB_ATTR_89_OFFSET                                                 0XFD480164
+#undef PCIE_ATTRIB_ATTR_79_OFFSET 
+#define PCIE_ATTRIB_ATTR_79_OFFSET                                                 0XFD48013C
+#undef PCIE_ATTRIB_ATTR_43_OFFSET 
+#define PCIE_ATTRIB_ATTR_43_OFFSET                                                 0XFD4800AC
+
+/*USB 0 reset for control registers*/
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT                                   10
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK                                    0x00000400U
+
+/*This bit is used to choose between PIPE power present and 1'b1*/
+#undef USB3_0_FPD_POWER_PRSNT_OPTION_DEFVAL 
+#undef USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT 
+#undef USB3_0_FPD_POWER_PRSNT_OPTION_MASK 
+#define USB3_0_FPD_POWER_PRSNT_OPTION_DEFVAL                                       
+#define USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT                                        0
+#define USB3_0_FPD_POWER_PRSNT_OPTION_MASK                                         0x00000001U
+
+/*USB 0 sleep circuit reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL                                 0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT                                  8
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK                                   0x00000100U
+
+/*USB 0 reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT                                   6
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK                                    0x00000040U
+
+/*GEM 3 reset*/
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL                                     0x0000000F
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT                                      3
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK                                       0x00000008U
+
+/*Sata PM clock control select*/
+#undef SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_DEFVAL 
+#undef SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_SHIFT 
+#undef SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_MASK 
+#define SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_DEFVAL                                 
+#define SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_SHIFT                                  0
+#define SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_MASK                                   0x00000003U
+
+/*Sata block level reset*/
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT                                       1
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_MASK                                        0x00000002U
+
+/*PCIE config reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL                                  0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT                                   19
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK                                    0x00080000U
+
+/*PCIE control block level reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL                                 0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT                                  17
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK                                   0x00020000U
+
+/*PCIE bridge block level reset (AXI interface)*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL                               0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT                                18
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK                                 0x00040000U
+
+/*Display Port block level reset (includes DPDMA)*/
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT                                         16
+#define CRF_APB_RST_FPD_TOP_DP_RESET_MASK                                          0x00010000U
+
+/*Set to '1' to hold the GT in reset. Clear to release.*/
+#undef DP_DP_PHY_RESET_GT_RESET_DEFVAL 
+#undef DP_DP_PHY_RESET_GT_RESET_SHIFT 
+#undef DP_DP_PHY_RESET_GT_RESET_MASK 
+#define DP_DP_PHY_RESET_GT_RESET_DEFVAL                                            0x00010003
+#define DP_DP_PHY_RESET_GT_RESET_SHIFT                                             1
+#define DP_DP_PHY_RESET_GT_RESET_MASK                                              0x00000002U
+
+/*Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1*/
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK 
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL                                   0x00000000
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT                                    0
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK                                     0x0000000FU
+
+/*USB 2.0 Turnaround Time (USBTrdTim) Sets the turnaround time in PHY clocks. Specifies the response time for a MAC request to 
+		he Packet FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). The following are the required values for the minimum S
+		C bus frequency of 60 MHz. USB turnaround time is a critical certification criteria when using long cables and five hub level
+		. The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit
+		UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger 
+		alue. Note: This field is valid only in device mode.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_DEFVAL                                   0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT                                    10
+#define USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK                                     0x00003C00U
+
+/*Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio
+		 of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the
+		time when the Transceiver Select is set to 2'b00 (HS) to the time the TxValid is driven to 0 for sending the chirp-K. This de
+		ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power
+		off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur
+		ng hibernation. - This bit is valid only in device mode.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_DEFVAL                                     0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT                                      9
+#define USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK                                       0x00000200U
+
+/*Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen
+		_n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre
+		 to the external PHY. - 1'b1: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the external PHY. 
+		ote: This bit must be set high for Port0 if PHY is used. Note: In Device mode - Before issuing any device endpoint command wh
+		n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma
+		d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet
+		d.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_DEFVAL                                    0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT                                     8
+#define USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK                                      0x00000100U
+
+/*USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P
+		Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 
+		'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte
+		 in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i
+		 active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_DEFVAL                                      0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT                                       7
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK                                        0x00000080U
+
+/*Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co
+		figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app
+		ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F
+		r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s
+		t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati
+		g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi
+		 when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL                                0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT                                 6
+#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK                                  0x00000040U
+
+/*Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1
+		full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with 
+		ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U
+		B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_FSINTF_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_FSINTF_DEFVAL                                      0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT                                       5
+#define USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK                                        0x00000020U
+
+/*ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa
+		e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons
+		ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s
+		lected through DWC_USB3_HSPHY_INTERFACE.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_DEFVAL                               0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT                                4
+#define USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK                                 0x00000010U
+
+/*PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a
+		 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same 
+		lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen
+		 ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I
+		 any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYIF_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYIF_DEFVAL                                       0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT                                        3
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK                                         0x00000008U
+
+/*HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by
+		a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for 
+		dditional delays introduced by the PHY. This may be required, since the delay introduced by the PHY in generating the linesta
+		e condition may vary among PHYs. The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times.
+		The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit times. The application must program this 
+		ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH
+		 clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One
+		60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_DEFVAL                                     0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT                                      0
+#define USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK                                       0x00000007U
+
+/*This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk. This register 
+		alue is used to adjust the ITP interval when GCTL[SOFITPSYNC] is set to '1'; SOF and ITP interval when GLADJ.GFLADJ_REFCLK_LP
+		_SEL is set to '1'. This field must be programmed to a non-zero value only if GFLADJ_REFCLK_LPM_SEL is set to '1' or GCTL.SOF
+		TPSYNC is set to '1'. The value is derived as follows: FLADJ_REF_CLK_FLADJ=((125000/ref_clk_period_integer)-(125000/ref_clk_p
+		riod)) * ref_clk_period where - the ref_clk_period_integer is the integer value of the ref_clk period got by truncating the d
+		cimal (fractional) value that is programmed in the GUCTL.REF_CLK_PERIOD field. - the ref_clk_period is the ref_clk period inc
+		uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ =
+		((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P
+		RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value)*/
+#undef USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_DEFVAL 
+#undef USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT 
+#undef USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK 
+#define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_DEFVAL                              0x00000000
+#define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT                               8
+#define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK                                0x003FFF00U
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L0_PLL_STATUS_READ_1_OFFSET                                         0XFD4023E4
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L1_PLL_STATUS_READ_1_OFFSET                                         0XFD4063E4
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L2_PLL_STATUS_READ_1_OFFSET                                         0XFD40A3E4
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L3_PLL_STATUS_READ_1_OFFSET                                         0XFD40E3E4
+
+/*Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r
+		gister.; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK 
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL                  0x000009FF
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT                   14
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK                    0x00004000U
+
+/*If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root
+		ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_SHIFT 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_MASK 
+#define PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_DEFVAL              0x00000905
+#define PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_SHIFT               9
+#define PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_MASK                0x00000200U
+
+/*Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0x0004; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_7_ATTR_BAR0_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_7_ATTR_BAR0_SHIFT 
+#undef PCIE_ATTRIB_ATTR_7_ATTR_BAR0_MASK 
+#define PCIE_ATTRIB_ATTR_7_ATTR_BAR0_DEFVAL                                        
+#define PCIE_ATTRIB_ATTR_7_ATTR_BAR0_SHIFT                                         0
+#define PCIE_ATTRIB_ATTR_7_ATTR_BAR0_MASK                                          0x0000FFFFU
+
+/*Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0xFFF0; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_8_ATTR_BAR0_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_8_ATTR_BAR0_SHIFT 
+#undef PCIE_ATTRIB_ATTR_8_ATTR_BAR0_MASK 
+#define PCIE_ATTRIB_ATTR_8_ATTR_BAR0_DEFVAL                                        
+#define PCIE_ATTRIB_ATTR_8_ATTR_BAR0_SHIFT                                         0
+#define PCIE_ATTRIB_ATTR_8_ATTR_BAR0_MASK                                          0x0000FFFFU
+
+/*Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_9_ATTR_BAR1_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_9_ATTR_BAR1_SHIFT 
+#undef PCIE_ATTRIB_ATTR_9_ATTR_BAR1_MASK 
+#define PCIE_ATTRIB_ATTR_9_ATTR_BAR1_DEFVAL                                        
+#define PCIE_ATTRIB_ATTR_9_ATTR_BAR1_SHIFT                                         0
+#define PCIE_ATTRIB_ATTR_9_ATTR_BAR1_MASK                                          0x0000FFFFU
+
+/*Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_10_ATTR_BAR1_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_10_ATTR_BAR1_SHIFT 
+#undef PCIE_ATTRIB_ATTR_10_ATTR_BAR1_MASK 
+#define PCIE_ATTRIB_ATTR_10_ATTR_BAR1_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_10_ATTR_BAR1_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_10_ATTR_BAR1_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFFF*/
+#undef PCIE_ATTRIB_ATTR_11_ATTR_BAR2_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_11_ATTR_BAR2_SHIFT 
+#undef PCIE_ATTRIB_ATTR_11_ATTR_BAR2_MASK 
+#define PCIE_ATTRIB_ATTR_11_ATTR_BAR2_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_11_ATTR_BAR2_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_11_ATTR_BAR2_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0x00FF*/
+#undef PCIE_ATTRIB_ATTR_12_ATTR_BAR2_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_12_ATTR_BAR2_SHIFT 
+#undef PCIE_ATTRIB_ATTR_12_ATTR_BAR2_MASK 
+#define PCIE_ATTRIB_ATTR_12_ATTR_BAR2_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_12_ATTR_BAR2_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_12_ATTR_BAR2_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_13_ATTR_BAR3_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_13_ATTR_BAR3_SHIFT 
+#undef PCIE_ATTRIB_ATTR_13_ATTR_BAR3_MASK 
+#define PCIE_ATTRIB_ATTR_13_ATTR_BAR3_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_13_ATTR_BAR3_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_13_ATTR_BAR3_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFFF*/
+#undef PCIE_ATTRIB_ATTR_14_ATTR_BAR3_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_14_ATTR_BAR3_SHIFT 
+#undef PCIE_ATTRIB_ATTR_14_ATTR_BAR3_MASK 
+#define PCIE_ATTRIB_ATTR_14_ATTR_BAR3_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_14_ATTR_BAR3_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_14_ATTR_BAR3_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFF0*/
+#undef PCIE_ATTRIB_ATTR_15_ATTR_BAR4_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_15_ATTR_BAR4_SHIFT 
+#undef PCIE_ATTRIB_ATTR_15_ATTR_BAR4_MASK 
+#define PCIE_ATTRIB_ATTR_15_ATTR_BAR4_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_15_ATTR_BAR4_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_15_ATTR_BAR4_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0xFFF0*/
+#undef PCIE_ATTRIB_ATTR_16_ATTR_BAR4_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_16_ATTR_BAR4_SHIFT 
+#undef PCIE_ATTRIB_ATTR_16_ATTR_BAR4_MASK 
+#define PCIE_ATTRIB_ATTR_16_ATTR_BAR4_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_16_ATTR_BAR4_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_16_ATTR_BAR4_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1*/
+#undef PCIE_ATTRIB_ATTR_17_ATTR_BAR5_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_17_ATTR_BAR5_SHIFT 
+#undef PCIE_ATTRIB_ATTR_17_ATTR_BAR5_MASK 
+#define PCIE_ATTRIB_ATTR_17_ATTR_BAR5_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_17_ATTR_BAR5_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_17_ATTR_BAR5_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1*/
+#undef PCIE_ATTRIB_ATTR_18_ATTR_BAR5_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_18_ATTR_BAR5_SHIFT 
+#undef PCIE_ATTRIB_ATTR_18_ATTR_BAR5_MASK 
+#define PCIE_ATTRIB_ATTR_18_ATTR_BAR5_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_18_ATTR_BAR5_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_18_ATTR_BAR5_MASK                                         0x0000FFFFU
+
+/*Specifies maximum payload supported. Valid settings are: 0- 128 bytes, 1- 256 bytes, 2- 512 bytes, 3- 1024 bytes. Transferred
+		to the Device Capabilities register. The values: 4-2048 bytes, 5- 4096 bytes are not supported; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_SHIFT 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_MASK 
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_DEFVAL              0x00002138
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_SHIFT               8
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_MASK                0x00000700U
+
+/*Endpoint L1 Acceptable Latency. Records the latency that the endpoint can withstand on transitions from L1 state to L0 (if L1
+		state supported). Valid settings are: 0h less than 1us, 1h 1 to 2us, 2h 2 to 4us, 3h 4 to 8us, 4h 8 to 16us, 5h 16 to 32us, 6
+		 32 to 64us, 7h more than 64us. For Endpoints only. Must be 0h for other devices.; EP=0x0007; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_SHIFT 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_MASK 
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_DEFVAL                0x00002138
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_SHIFT                 3
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_MASK                  0x00000038U
+
+/*Identifies the type of device/port as follows: 0000b PCI Express Endpoint device, 0001b Legacy PCI Express Endpoint device, 0
+		00b Root Port of PCI Express Root Complex, 0101b Upstream Port of PCI Express Switch, 0110b Downstream Port of PCI Express Sw
+		tch, 0111b PCIE Express to PCI/PCI-X Bridge, 1000b PCI/PCI-X to PCI Express Bridge. Transferred to PCI Express Capabilities r
+		gister. Must be consistent with IS_SWITCH and UPSTREAM_FACING settings.; EP=0x0000; RP=0x0004*/
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_MASK 
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_DEFVAL                  0x00009C02
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_SHIFT                   4
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_MASK                    0x000000F0U
+
+/*PCIe Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capab
+		lity.; EP=0x009C; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_DEFVAL                           0x00009C02
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_SHIFT                            8
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_MASK                             0x0000FF00U
+
+/*Number of credits that should be advertised for Completion data received on Virtual Channel 0. The bytes advertised must be l
+		ss than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0172; RP=0x00CD*/
+#undef PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_SHIFT 
+#undef PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_MASK 
+#define PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_DEFVAL                      
+#define PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_MASK                        0x000007FFU
+
+/*Number of credits that should be advertised for Completion headers received on Virtual Channel 0. The sum of the posted, non 
+		osted, and completion header credits must be <= 80; EP=0x0048; RP=0x0024*/
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_MASK 
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_DEFVAL                      0x00000248
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_MASK                        0x0000007FU
+
+/*Number of credits that should be advertised for Non-Posted headers received on Virtual Channel 0. The number of non posted da
+		a credits advertised by the block is equal to the number of non posted header credits. The sum of the posted, non posted, and
+		completion header credits must be <= 80; EP=0x0004; RP=0x000C*/
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_MASK 
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_DEFVAL                     0x00000248
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_SHIFT                      7
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_MASK                       0x00003F80U
+
+/*Number of credits that should be advertised for Non-Posted data received on Virtual Channel 0. The number of non posted data 
+		redits advertised by the block is equal to two times the number of non posted header credits if atomic operations are support
+		d or is equal to the number of non posted header credits if atomic operations are not supported. The bytes advertised must be
+		less than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0008; RP=0x0018*/
+#undef PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_SHIFT 
+#undef PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_MASK 
+#define PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_DEFVAL                     
+#define PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_SHIFT                      0
+#define PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_MASK                       0x000007FFU
+
+/*Number of credits that should be advertised for Posted data received on Virtual Channel 0. The bytes advertised must be less 
+		han or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0020; RP=0x00B5*/
+#undef PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_SHIFT 
+#undef PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_MASK 
+#define PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_DEFVAL                      
+#define PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_MASK                        0x000007FFU
+
+/*Not currently in use. Invert ECRC generated by block when trn_tecrc_gen_n and trn_terrfwd_n are asserted.; EP=0x0000; RP=0x00
+		0*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_DEFVAL                              0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_SHIFT                               15
+#define PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_MASK                                0x00008000U
+
+/*Enables td bit clear and ECRC trim on received TLP's FALSE == don't trim TRUE == trim.; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_DEFVAL                            0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_SHIFT                             14
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_MASK                              0x00004000U
+
+/*Enables ECRC check on received TLP's 0 == don't check 1 == always check 3 == check if enabled by ECRC check enable bit of AER
+		cap structure; EP=0x0003; RP=0x0003*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_DEFVAL                                 0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_SHIFT                                  12
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_MASK                                   0x00003000U
+
+/*Index of last packet buffer used by TX TLM (i.e. number of buffers - 1). Calculated from max payload size supported and the n
+		mber of brams configured for transmit; EP=0x001C; RP=0x001C*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_DEFVAL                         0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_SHIFT                          7
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_MASK                           0x00000F80U
+
+/*Number of credits that should be advertised for Posted headers received on Virtual Channel 0. The sum of the posted, non post
+		d, and completion header credits must be <= 80; EP=0x0004; RP=0x0020*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_DEFVAL                      0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_MASK                        0x0000007FU
+
+/*Specifies values to be transferred to Header Type register. Bit 7 should be set to '0' indicating single-function device. Bit
+		0 identifies header as Type 0 or Type 1, with '0' indicating a Type 0 header.; EP=0x0000; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_MASK 
+#define PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_DEFVAL                                0x00000100
+#define PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_SHIFT                                 0
+#define PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_MASK                                  0x000000FFU
+
+/*PM Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabil
+		ty.; EP=0x0048; RP=0x0060*/
+#undef PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_DEFVAL                             0x00003D48
+#define PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_SHIFT                              0
+#define PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_MASK                               0x000000FFU
+
+/*MSI Per-Vector Masking Capable. The value is transferred to the MSI Control Register[8]. When set, adds Mask and Pending Dwor
+		 to Cap structure; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_DEFVAL         0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_SHIFT          9
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_MASK           0x00000200U
+
+/*Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL                                 0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT                                  8
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK                                   0x00000100U
+
+/*MSI Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabi
+		ity.; EP=0x0060; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_DEFVAL                            0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_SHIFT                             0
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_MASK                              0x000000FFU
+
+/*Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL                                 0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT                                  8
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK                                   0x00000100U
+
+/*Maximum Link Width. Valid settings are: 000001b x1, 000010b x2, 000100b x4, 001000b x8.; EP=0x0004; RP=0x0004*/
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_MASK 
+#define PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_DEFVAL                    0x00000104
+#define PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_SHIFT                     0
+#define PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_MASK                      0x0000003FU
+
+/*Used by LTSSM to set Maximum Link Width. Valid settings are: 000001b [x1], 000010b [x2], 000100b [x4], 001000b [x8].; EP=0x00
+		4; RP=0x0004*/
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_MASK 
+#define PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_DEFVAL                       0x00000104
+#define PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_SHIFT                        6
+#define PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_MASK                         0x00000FC0U
+
+/*TRUE specifies upstream-facing port. FALSE specifies downstream-facing port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_SHIFT 
+#undef PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_MASK 
+#define PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_DEFVAL                           0x000000F0
+#define PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_SHIFT                            6
+#define PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_MASK                             0x00000040U
+
+/*Enable the routing of message TLPs to the user through the TRN RX interface. A bit value of 1 enables routing of the message 
+		LP to the user. Messages are always decoded by the message decoder. Bit 0 - ERR COR, Bit 1 - ERR NONFATAL, Bit 2 - ERR FATAL,
+		Bit 3 - INTA Bit 4 - INTB, Bit 5 - INTC, Bit 6 - INTD, Bit 7 PM_PME, Bit 8 - PME_TO_ACK, Bit 9 - unlock, Bit 10 PME_Turn_Off;
+		EP=0x0000; RP=0x07FF*/
+#undef PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_MASK 
+#define PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_DEFVAL                          0x00000000
+#define PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_SHIFT                           5
+#define PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_MASK                            0x0000FFE0U
+
+/*Disable BAR filtering. Does not change the behavior of the bar hit outputs; EP=0x0000; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_SHIFT 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_MASK 
+#define PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_DEFVAL                     0x00000000
+#define PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_SHIFT                      1
+#define PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_MASK                       0x00000002U
+
+/*Link Bandwidth notification capability. Indicates support for the link bandwidth notification status and interrupt mechanism.
+		Required for Root.; EP=0x0000; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK 
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_DEFVAL   0x000009FF
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT    9
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK     0x00000200U
+
+/*Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L
+		_REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_SHIFT 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_MASK 
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_DEFVAL                       0x00000000
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_SHIFT                        15
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_MASK                         0x00008000U
+
+/*Sets a user-defined timeout for the Replay Timer to force cause the retransmission of unacknowledged TLPs; refer to LL_REPLAY
+		TIMEOUT_EN and LL_REPLAY_TIMEOUT_FUNC to see how this value is used. The unit for this attribute is in symbol times, which is
+		4ns at GEN1 speeds and 2ns at GEN2.; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_SHIFT 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_MASK 
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_DEFVAL                          0x00000000
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_SHIFT                           0
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_MASK                            0x00007FFFU
+
+/*Device ID for the the PCIe Cap Structure Device ID field*/
+#undef PCIE_ATTRIB_ID_CFG_DEV_ID_DEFVAL 
+#undef PCIE_ATTRIB_ID_CFG_DEV_ID_SHIFT 
+#undef PCIE_ATTRIB_ID_CFG_DEV_ID_MASK 
+#define PCIE_ATTRIB_ID_CFG_DEV_ID_DEFVAL                                           0x10EE7024
+#define PCIE_ATTRIB_ID_CFG_DEV_ID_SHIFT                                            0
+#define PCIE_ATTRIB_ID_CFG_DEV_ID_MASK                                             0x0000FFFFU
+
+/*Vendor ID for the PCIe Cap Structure Vendor ID field*/
+#undef PCIE_ATTRIB_ID_CFG_VEND_ID_DEFVAL 
+#undef PCIE_ATTRIB_ID_CFG_VEND_ID_SHIFT 
+#undef PCIE_ATTRIB_ID_CFG_VEND_ID_MASK 
+#define PCIE_ATTRIB_ID_CFG_VEND_ID_DEFVAL                                          0x10EE7024
+#define PCIE_ATTRIB_ID_CFG_VEND_ID_SHIFT                                           16
+#define PCIE_ATTRIB_ID_CFG_VEND_ID_MASK                                            0xFFFF0000U
+
+/*Subsystem ID for the the PCIe Cap Structure Subsystem ID field*/
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_DEFVAL 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_SHIFT 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_MASK 
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_DEFVAL                                 0x10EE0007
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_SHIFT                                  0
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_MASK                                   0x0000FFFFU
+
+/*Subsystem Vendor ID for the PCIe Cap Structure Subsystem Vendor ID field*/
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_DEFVAL 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_SHIFT 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_MASK 
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_DEFVAL                            0x10EE0007
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_SHIFT                             16
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_MASK                              0xFFFF0000U
+
+/*Revision ID for the the PCIe Cap Structure*/
+#undef PCIE_ATTRIB_REV_ID_CFG_REV_ID_DEFVAL 
+#undef PCIE_ATTRIB_REV_ID_CFG_REV_ID_SHIFT 
+#undef PCIE_ATTRIB_REV_ID_CFG_REV_ID_MASK 
+#define PCIE_ATTRIB_REV_ID_CFG_REV_ID_DEFVAL                                       
+#define PCIE_ATTRIB_REV_ID_CFG_REV_ID_SHIFT                                        0
+#define PCIE_ATTRIB_REV_ID_CFG_REV_ID_MASK                                         0x000000FFU
+
+/*Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		8000; RP=0x8000*/
+#undef PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_MASK 
+#define PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_DEFVAL                                 
+#define PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_SHIFT                                  0
+#define PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_MASK                                   0x0000FFFFU
+
+/*Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		0005; RP=0x0006*/
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_MASK 
+#define PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_DEFVAL                                 0x00000905
+#define PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_SHIFT                                  0
+#define PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_MASK                                   0x000000FFU
+
+/*INTX Interrupt Generation Capable. If FALSE, this will cause Command[10] to be hardwired to 0.; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_SHIFT 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_MASK 
+#define PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_DEFVAL                       0x00000905
+#define PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_SHIFT                        8
+#define PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_MASK                         0x00000100U
+
+/*Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL                                  0x00001000
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT                                   12
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK                                    0x00001000U
+
+/*Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL                                  0x00001000
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT                                   12
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK                                    0x00001000U
+
+/*VSEC's Next Capability Offset pointer to the next item in the capabilities list, or 000h if this is the final capability.; EP
+		0x0140; RP=0x0140*/
+#undef PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_DEFVAL                           0x00002281
+#define PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_SHIFT                            1
+#define PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_MASK                             0x00001FFEU
+
+/*CRS SW Visibility. Indicates RC can return CRS to SW. Transferred to the Root Capabilities register.; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_SHIFT 
+#undef PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_MASK 
+#define PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_DEFVAL                 0x00000000
+#define PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_SHIFT                  5
+#define PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_MASK                   0x00000020U
+
+/*Indicates that the MSIX structures exists. If this is FALSE, then the MSIX structure cannot be accessed via either the link o
+		 the management port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_DEFVAL                                0x00000100
+#define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT                                 8
+#define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK                                  0x00000100U
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef CRL_APB_RST_LPD_IOU0_OFFSET 
+#define CRL_APB_RST_LPD_IOU0_OFFSET                                                0XFF5E0230
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef DP_DP_TX_PHY_POWER_DOWN_OFFSET 
+#define DP_DP_TX_PHY_POWER_DOWN_OFFSET                                             0XFD4A0238
+#undef DP_DP_PHY_RESET_OFFSET 
+#define DP_DP_PHY_RESET_OFFSET                                                     0XFD4A0200
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+
+/*USB 0 reset for control registers*/
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT                                   10
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK                                    0x00000400U
+
+/*USB 0 sleep circuit reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL                                 0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT                                  8
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK                                   0x00000100U
+
+/*USB 0 reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT                                   6
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK                                    0x00000040U
+
+/*GEM 3 reset*/
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL                                     0x0000000F
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT                                      3
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK                                       0x00000008U
+
+/*Sata block level reset*/
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT                                       1
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_MASK                                        0x00000002U
+
+/*PCIE config reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL                                  0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT                                   19
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK                                    0x00080000U
+
+/*PCIE control block level reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL                                 0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT                                  17
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK                                   0x00020000U
+
+/*PCIE bridge block level reset (AXI interface)*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL                               0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT                                18
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK                                 0x00040000U
+
+/*Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1*/
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK 
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL                                   0x00000000
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT                                    0
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK                                     0x0000000FU
+
+/*Set to '1' to hold the GT in reset. Clear to release.*/
+#undef DP_DP_PHY_RESET_GT_RESET_DEFVAL 
+#undef DP_DP_PHY_RESET_GT_RESET_SHIFT 
+#undef DP_DP_PHY_RESET_GT_RESET_MASK 
+#define DP_DP_PHY_RESET_GT_RESET_DEFVAL                                            0x00010003
+#define DP_DP_PHY_RESET_GT_RESET_SHIFT                                             1
+#define DP_DP_PHY_RESET_GT_RESET_MASK                                              0x00000002U
+
+/*Display Port block level reset (includes DPDMA)*/
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT                                         16
+#define CRF_APB_RST_FPD_TOP_DP_RESET_MASK                                          0x00010000U
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_OFFSET 
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_OFFSET                                         0XFFD80118
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_OFFSET 
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_OFFSET                                           0XFFD80120
+
+/*Power-up Request Interrupt Enable for PL*/
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_DEFVAL 
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_SHIFT 
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_MASK 
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_DEFVAL                                      0x00000000
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_SHIFT                                       23
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_MASK                                        0x00800000U
+
+/*Power-up Request Trigger for PL*/
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_PL_DEFVAL 
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_PL_SHIFT 
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_PL_MASK 
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_PL_DEFVAL                                        0x00000000
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_PL_SHIFT                                         23
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_PL_MASK                                          0x00800000U
+
+/*Power-up Request Status for PL*/
+#undef PMU_GLOBAL_REQ_PWRUP_STATUS_PL_DEFVAL 
+#undef PMU_GLOBAL_REQ_PWRUP_STATUS_PL_SHIFT 
+#undef PMU_GLOBAL_REQ_PWRUP_STATUS_PL_MASK 
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_PL_DEFVAL                                      0x00000000
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_PL_SHIFT                                       23
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_PL_MASK                                        0x00800000U
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_OFFSET                                         0XFFD80110
+#undef GPIO_MASK_DATA_5_MSW_OFFSET 
+#define GPIO_MASK_DATA_5_MSW_OFFSET                                                0XFF0A002C
+#undef GPIO_DIRM_5_OFFSET 
+#define GPIO_DIRM_5_OFFSET                                                         0XFF0A0344
+#undef GPIO_OEN_5_OFFSET 
+#define GPIO_OEN_5_OFFSET                                                          0XFF0A0348
+#undef GPIO_DATA_5_OFFSET 
+#define GPIO_DATA_5_OFFSET                                                         0XFF0A0054
+#undef GPIO_DATA_5_OFFSET 
+#define GPIO_DATA_5_OFFSET                                                         0XFF0A0054
+#undef GPIO_DATA_5_OFFSET 
+#define GPIO_DATA_5_OFFSET                                                         0XFF0A0054
+
+/*Operation is the same as MASK_DATA_0_LSW[MASK_0_LSW]*/
+#undef GPIO_MASK_DATA_5_MSW_MASK_5_MSW_DEFVAL 
+#undef GPIO_MASK_DATA_5_MSW_MASK_5_MSW_SHIFT 
+#undef GPIO_MASK_DATA_5_MSW_MASK_5_MSW_MASK 
+#define GPIO_MASK_DATA_5_MSW_MASK_5_MSW_DEFVAL                                     0x00000000
+#define GPIO_MASK_DATA_5_MSW_MASK_5_MSW_SHIFT                                      16
+#define GPIO_MASK_DATA_5_MSW_MASK_5_MSW_MASK                                       0xFFFF0000U
+
+/*Operation is the same as DIRM_0[DIRECTION_0]*/
+#undef GPIO_DIRM_5_DIRECTION_5_DEFVAL 
+#undef GPIO_DIRM_5_DIRECTION_5_SHIFT 
+#undef GPIO_DIRM_5_DIRECTION_5_MASK 
+#define GPIO_DIRM_5_DIRECTION_5_DEFVAL                                             
+#define GPIO_DIRM_5_DIRECTION_5_SHIFT                                              0
+#define GPIO_DIRM_5_DIRECTION_5_MASK                                               0xFFFFFFFFU
+
+/*Operation is the same as OEN_0[OP_ENABLE_0]*/
+#undef GPIO_OEN_5_OP_ENABLE_5_DEFVAL 
+#undef GPIO_OEN_5_OP_ENABLE_5_SHIFT 
+#undef GPIO_OEN_5_OP_ENABLE_5_MASK 
+#define GPIO_OEN_5_OP_ENABLE_5_DEFVAL                                              
+#define GPIO_OEN_5_OP_ENABLE_5_SHIFT                                               0
+#define GPIO_OEN_5_OP_ENABLE_5_MASK                                                0xFFFFFFFFU
+
+/*Output Data*/
+#undef GPIO_DATA_5_DATA_5_DEFVAL 
+#undef GPIO_DATA_5_DATA_5_SHIFT 
+#undef GPIO_DATA_5_DATA_5_MASK 
+#define GPIO_DATA_5_DATA_5_DEFVAL                                                  
+#define GPIO_DATA_5_DATA_5_SHIFT                                                   0
+#define GPIO_DATA_5_DATA_5_MASK                                                    0xFFFFFFFFU
+
+/*Output Data*/
+#undef GPIO_DATA_5_DATA_5_DEFVAL 
+#undef GPIO_DATA_5_DATA_5_SHIFT 
+#undef GPIO_DATA_5_DATA_5_MASK 
+#define GPIO_DATA_5_DATA_5_DEFVAL                                                  
+#define GPIO_DATA_5_DATA_5_SHIFT                                                   0
+#define GPIO_DATA_5_DATA_5_MASK                                                    0xFFFFFFFFU
+
+/*Output Data*/
+#undef GPIO_DATA_5_DATA_5_DEFVAL 
+#undef GPIO_DATA_5_DATA_5_SHIFT 
+#undef GPIO_DATA_5_DATA_5_MASK 
+#define GPIO_DATA_5_DATA_5_DEFVAL                                                  
+#define GPIO_DATA_5_DATA_5_SHIFT                                                   0
+#define GPIO_DATA_5_DATA_5_MASK                                                    0xFFFFFFFFU
+#ifdef __cplusplus
+extern "C" {
+#endif
+ int psu_init (); 
+ unsigned long psu_ps_pl_isolation_removal_data(); 
+ unsigned long psu_ps_pl_reset_config_data(); 
+#ifdef __cplusplus
+}
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.tcl b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.tcl
new file mode 100644
index 000000000..ce5a46e85
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.tcl
@@ -0,0 +1,13537 @@
+#****************************************************************************
+###
+#
+# @file psu_init.tcl
+#
+# This file is automatically generated
+#
+#****************************************************************************
+set psu_pll_init_data {
+		# : RPLL INIT
+		# Register : RPLL_CFG @ 0XFF5E0034

+
+		# PLL loop filter resistor control
+		# PSU_CRL_APB_RPLL_CFG_RES                                                        0x2
+
+		# PLL charge pump control
+		# PSU_CRL_APB_RPLL_CFG_CP                                                         0x3
+
+		# PLL loop filter high frequency capacitor control
+		# PSU_CRL_APB_RPLL_CFG_LFHF                                                       0x3
+
+		# Lock circuit counter setting
+		# PSU_CRL_APB_RPLL_CFG_LOCK_CNT                                                   0x258
+
+		# Lock circuit configuration settings for lock windowsize
+		# PSU_CRL_APB_RPLL_CFG_LOCK_DLY                                                   0x3f
+
+		# Helper data. Values are to be looked up in a table from Data Sheet
+		#(OFFSET, MASK, VALUE)      (0XFF5E0034, 0xFE7FEDEFU ,0x7E4B0C62U)  */
+    mask_write 0XFF5E0034 0xFE7FEDEF 0x7E4B0C62
+		# : UPDATE FB_DIV
+		# Register : RPLL_CTRL @ 0XFF5E0030

+
+		# Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		# ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		# PSU_CRL_APB_RPLL_CTRL_PRE_SRC                                                   0x0
+
+		# The integer portion of the feedback divider to the PLL
+		# PSU_CRL_APB_RPLL_CTRL_FBDIV                                                     0x48
+
+		# This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		# PSU_CRL_APB_RPLL_CTRL_DIV2                                                      0x1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00717F00U ,0x00014800U)  */
+    mask_write 0XFF5E0030 0x00717F00 0x00014800
+		# : BY PASS PLL
+		# Register : RPLL_CTRL @ 0XFF5E0030

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000008U)  */
+    mask_write 0XFF5E0030 0x00000008 0x00000008
+		# : ASSERT RESET
+		# Register : RPLL_CTRL @ 0XFF5E0030

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRL_APB_RPLL_CTRL_RESET                                                     1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFF5E0030 0x00000001 0x00000001
+		# : DEASSERT RESET
+		# Register : RPLL_CTRL @ 0XFF5E0030

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRL_APB_RPLL_CTRL_RESET                                                     0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFF5E0030 0x00000001 0x00000000
+		# : CHECK PLL STATUS
+		# Register : PLL_STATUS @ 0XFF5E0040

+
+		# RPLL is locked
+		# PSU_CRL_APB_PLL_STATUS_RPLL_LOCK                                                1
+    mask_poll 0XFF5E0040 0x00000002
+		# : REMOVE PLL BY PASS
+		# Register : RPLL_CTRL @ 0XFF5E0030

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFF5E0030 0x00000008 0x00000000
+		# Register : RPLL_TO_FPD_CTRL @ 0XFF5E0048

+
+		# Divisor value for this clock.
+		# PSU_CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0                                           0x3
+
+		# Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0048, 0x00003F00U ,0x00000300U)  */
+    mask_write 0XFF5E0048 0x00003F00 0x00000300
+		# : RPLL FRAC CFG
+		# Register : RPLL_FRAC_CFG @ 0XFF5E0038

+
+		# Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		#  mode and uses DATA of this register for the fractional portion of the feedback divider.
+		# PSU_CRL_APB_RPLL_FRAC_CFG_ENABLED                                               0x0
+
+		# Fractional value for the Feedback value.
+		# PSU_CRL_APB_RPLL_FRAC_CFG_DATA                                                  0x0
+
+		# Fractional control for the PLL
+		#(OFFSET, MASK, VALUE)      (0XFF5E0038, 0x8000FFFFU ,0x00000000U)  */
+    mask_write 0XFF5E0038 0x8000FFFF 0x00000000
+		# : IOPLL INIT
+		# Register : IOPLL_CFG @ 0XFF5E0024

+
+		# PLL loop filter resistor control
+		# PSU_CRL_APB_IOPLL_CFG_RES                                                       0xc
+
+		# PLL charge pump control
+		# PSU_CRL_APB_IOPLL_CFG_CP                                                        0x3
+
+		# PLL loop filter high frequency capacitor control
+		# PSU_CRL_APB_IOPLL_CFG_LFHF                                                      0x3
+
+		# Lock circuit counter setting
+		# PSU_CRL_APB_IOPLL_CFG_LOCK_CNT                                                  0x339
+
+		# Lock circuit configuration settings for lock windowsize
+		# PSU_CRL_APB_IOPLL_CFG_LOCK_DLY                                                  0x3f
+
+		# Helper data. Values are to be looked up in a table from Data Sheet
+		#(OFFSET, MASK, VALUE)      (0XFF5E0024, 0xFE7FEDEFU ,0x7E672C6CU)  */
+    mask_write 0XFF5E0024 0xFE7FEDEF 0x7E672C6C
+		# : UPDATE FB_DIV
+		# Register : IOPLL_CTRL @ 0XFF5E0020

+
+		# Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		# ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		# PSU_CRL_APB_IOPLL_CTRL_PRE_SRC                                                  0x0
+
+		# The integer portion of the feedback divider to the PLL
+		# PSU_CRL_APB_IOPLL_CTRL_FBDIV                                                    0x2d
+
+		# This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		# PSU_CRL_APB_IOPLL_CTRL_DIV2                                                     0x0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00717F00U ,0x00002D00U)  */
+    mask_write 0XFF5E0020 0x00717F00 0x00002D00
+		# : BY PASS PLL
+		# Register : IOPLL_CTRL @ 0XFF5E0020

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000008U)  */
+    mask_write 0XFF5E0020 0x00000008 0x00000008
+		# : ASSERT RESET
+		# Register : IOPLL_CTRL @ 0XFF5E0020

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRL_APB_IOPLL_CTRL_RESET                                                    1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFF5E0020 0x00000001 0x00000001
+		# : DEASSERT RESET
+		# Register : IOPLL_CTRL @ 0XFF5E0020

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRL_APB_IOPLL_CTRL_RESET                                                    0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFF5E0020 0x00000001 0x00000000
+		# : CHECK PLL STATUS
+		# Register : PLL_STATUS @ 0XFF5E0040

+
+		# IOPLL is locked
+		# PSU_CRL_APB_PLL_STATUS_IOPLL_LOCK                                               1
+    mask_poll 0XFF5E0040 0x00000001
+		# : REMOVE PLL BY PASS
+		# Register : IOPLL_CTRL @ 0XFF5E0020

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFF5E0020 0x00000008 0x00000000
+		# Register : IOPLL_TO_FPD_CTRL @ 0XFF5E0044

+
+		# Divisor value for this clock.
+		# PSU_CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0                                          0x3
+
+		# Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0044, 0x00003F00U ,0x00000300U)  */
+    mask_write 0XFF5E0044 0x00003F00 0x00000300
+		# : IOPLL FRAC CFG
+		# Register : IOPLL_FRAC_CFG @ 0XFF5E0028

+
+		# Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		#  mode and uses DATA of this register for the fractional portion of the feedback divider.
+		# PSU_CRL_APB_IOPLL_FRAC_CFG_ENABLED                                              0x0
+
+		# Fractional value for the Feedback value.
+		# PSU_CRL_APB_IOPLL_FRAC_CFG_DATA                                                 0x0
+
+		# Fractional control for the PLL
+		#(OFFSET, MASK, VALUE)      (0XFF5E0028, 0x8000FFFFU ,0x00000000U)  */
+    mask_write 0XFF5E0028 0x8000FFFF 0x00000000
+		# : APU_PLL INIT
+		# Register : APLL_CFG @ 0XFD1A0024

+
+		# PLL loop filter resistor control
+		# PSU_CRF_APB_APLL_CFG_RES                                                        0x2
+
+		# PLL charge pump control
+		# PSU_CRF_APB_APLL_CFG_CP                                                         0x3
+
+		# PLL loop filter high frequency capacitor control
+		# PSU_CRF_APB_APLL_CFG_LFHF                                                       0x3
+
+		# Lock circuit counter setting
+		# PSU_CRF_APB_APLL_CFG_LOCK_CNT                                                   0x258
+
+		# Lock circuit configuration settings for lock windowsize
+		# PSU_CRF_APB_APLL_CFG_LOCK_DLY                                                   0x3f
+
+		# Helper data. Values are to be looked up in a table from Data Sheet
+		#(OFFSET, MASK, VALUE)      (0XFD1A0024, 0xFE7FEDEFU ,0x7E4B0C62U)  */
+    mask_write 0XFD1A0024 0xFE7FEDEF 0x7E4B0C62
+		# : UPDATE FB_DIV
+		# Register : APLL_CTRL @ 0XFD1A0020

+
+		# Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		# ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		# PSU_CRF_APB_APLL_CTRL_PRE_SRC                                                   0x0
+
+		# The integer portion of the feedback divider to the PLL
+		# PSU_CRF_APB_APLL_CTRL_FBDIV                                                     0x42
+
+		# This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		# PSU_CRF_APB_APLL_CTRL_DIV2                                                      0x1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00717F00U ,0x00014200U)  */
+    mask_write 0XFD1A0020 0x00717F00 0x00014200
+		# : BY PASS PLL
+		# Register : APLL_CTRL @ 0XFD1A0020

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_APLL_CTRL_BYPASS                                                    1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000008U)  */
+    mask_write 0XFD1A0020 0x00000008 0x00000008
+		# : ASSERT RESET
+		# Register : APLL_CTRL @ 0XFD1A0020

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRF_APB_APLL_CTRL_RESET                                                     1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD1A0020 0x00000001 0x00000001
+		# : DEASSERT RESET
+		# Register : APLL_CTRL @ 0XFD1A0020

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRF_APB_APLL_CTRL_RESET                                                     0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFD1A0020 0x00000001 0x00000000
+		# : CHECK PLL STATUS
+		# Register : PLL_STATUS @ 0XFD1A0044

+
+		# APLL is locked
+		# PSU_CRF_APB_PLL_STATUS_APLL_LOCK                                                1
+    mask_poll 0XFD1A0044 0x00000001
+		# : REMOVE PLL BY PASS
+		# Register : APLL_CTRL @ 0XFD1A0020

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_APLL_CTRL_BYPASS                                                    0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFD1A0020 0x00000008 0x00000000
+		# Register : APLL_TO_LPD_CTRL @ 0XFD1A0048

+
+		# Divisor value for this clock.
+		# PSU_CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		# Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		#(OFFSET, MASK, VALUE)      (0XFD1A0048, 0x00003F00U ,0x00000300U)  */
+    mask_write 0XFD1A0048 0x00003F00 0x00000300
+		# : APLL FRAC CFG
+		# Register : APLL_FRAC_CFG @ 0XFD1A0028

+
+		# Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		#  mode and uses DATA of this register for the fractional portion of the feedback divider.
+		# PSU_CRF_APB_APLL_FRAC_CFG_ENABLED                                               0x0
+
+		# Fractional value for the Feedback value.
+		# PSU_CRF_APB_APLL_FRAC_CFG_DATA                                                  0x0
+
+		# Fractional control for the PLL
+		#(OFFSET, MASK, VALUE)      (0XFD1A0028, 0x8000FFFFU ,0x00000000U)  */
+    mask_write 0XFD1A0028 0x8000FFFF 0x00000000
+		# : DDR_PLL INIT
+		# Register : DPLL_CFG @ 0XFD1A0030

+
+		# PLL loop filter resistor control
+		# PSU_CRF_APB_DPLL_CFG_RES                                                        0x2
+
+		# PLL charge pump control
+		# PSU_CRF_APB_DPLL_CFG_CP                                                         0x3
+
+		# PLL loop filter high frequency capacitor control
+		# PSU_CRF_APB_DPLL_CFG_LFHF                                                       0x3
+
+		# Lock circuit counter setting
+		# PSU_CRF_APB_DPLL_CFG_LOCK_CNT                                                   0x258
+
+		# Lock circuit configuration settings for lock windowsize
+		# PSU_CRF_APB_DPLL_CFG_LOCK_DLY                                                   0x3f
+
+		# Helper data. Values are to be looked up in a table from Data Sheet
+		#(OFFSET, MASK, VALUE)      (0XFD1A0030, 0xFE7FEDEFU ,0x7E4B0C62U)  */
+    mask_write 0XFD1A0030 0xFE7FEDEF 0x7E4B0C62
+		# : UPDATE FB_DIV
+		# Register : DPLL_CTRL @ 0XFD1A002C

+
+		# Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		# ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		# PSU_CRF_APB_DPLL_CTRL_PRE_SRC                                                   0x0
+
+		# The integer portion of the feedback divider to the PLL
+		# PSU_CRF_APB_DPLL_CTRL_FBDIV                                                     0x40
+
+		# This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		# PSU_CRF_APB_DPLL_CTRL_DIV2                                                      0x1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00717F00U ,0x00014000U)  */
+    mask_write 0XFD1A002C 0x00717F00 0x00014000
+		# : BY PASS PLL
+		# Register : DPLL_CTRL @ 0XFD1A002C

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000008U)  */
+    mask_write 0XFD1A002C 0x00000008 0x00000008
+		# : ASSERT RESET
+		# Register : DPLL_CTRL @ 0XFD1A002C

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRF_APB_DPLL_CTRL_RESET                                                     1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD1A002C 0x00000001 0x00000001
+		# : DEASSERT RESET
+		# Register : DPLL_CTRL @ 0XFD1A002C

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRF_APB_DPLL_CTRL_RESET                                                     0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFD1A002C 0x00000001 0x00000000
+		# : CHECK PLL STATUS
+		# Register : PLL_STATUS @ 0XFD1A0044

+
+		# DPLL is locked
+		# PSU_CRF_APB_PLL_STATUS_DPLL_LOCK                                                1
+    mask_poll 0XFD1A0044 0x00000002
+		# : REMOVE PLL BY PASS
+		# Register : DPLL_CTRL @ 0XFD1A002C

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFD1A002C 0x00000008 0x00000000
+		# Register : DPLL_TO_LPD_CTRL @ 0XFD1A004C

+
+		# Divisor value for this clock.
+		# PSU_CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		# Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		#(OFFSET, MASK, VALUE)      (0XFD1A004C, 0x00003F00U ,0x00000300U)  */
+    mask_write 0XFD1A004C 0x00003F00 0x00000300
+		# : DPLL FRAC CFG
+		# Register : DPLL_FRAC_CFG @ 0XFD1A0034

+
+		# Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		#  mode and uses DATA of this register for the fractional portion of the feedback divider.
+		# PSU_CRF_APB_DPLL_FRAC_CFG_ENABLED                                               0x0
+
+		# Fractional value for the Feedback value.
+		# PSU_CRF_APB_DPLL_FRAC_CFG_DATA                                                  0x0
+
+		# Fractional control for the PLL
+		#(OFFSET, MASK, VALUE)      (0XFD1A0034, 0x8000FFFFU ,0x00000000U)  */
+    mask_write 0XFD1A0034 0x8000FFFF 0x00000000
+		# : VIDEO_PLL INIT
+		# Register : VPLL_CFG @ 0XFD1A003C

+
+		# PLL loop filter resistor control
+		# PSU_CRF_APB_VPLL_CFG_RES                                                        0x2
+
+		# PLL charge pump control
+		# PSU_CRF_APB_VPLL_CFG_CP                                                         0x3
+
+		# PLL loop filter high frequency capacitor control
+		# PSU_CRF_APB_VPLL_CFG_LFHF                                                       0x3
+
+		# Lock circuit counter setting
+		# PSU_CRF_APB_VPLL_CFG_LOCK_CNT                                                   0x28a
+
+		# Lock circuit configuration settings for lock windowsize
+		# PSU_CRF_APB_VPLL_CFG_LOCK_DLY                                                   0x3f
+
+		# Helper data. Values are to be looked up in a table from Data Sheet
+		#(OFFSET, MASK, VALUE)      (0XFD1A003C, 0xFE7FEDEFU ,0x7E514C62U)  */
+    mask_write 0XFD1A003C 0xFE7FEDEF 0x7E514C62
+		# : UPDATE FB_DIV
+		# Register : VPLL_CTRL @ 0XFD1A0038

+
+		# Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		# ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		# PSU_CRF_APB_VPLL_CTRL_PRE_SRC                                                   0x0
+
+		# The integer portion of the feedback divider to the PLL
+		# PSU_CRF_APB_VPLL_CTRL_FBDIV                                                     0x39
+
+		# This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		# PSU_CRF_APB_VPLL_CTRL_DIV2                                                      0x1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00717F00U ,0x00013900U)  */
+    mask_write 0XFD1A0038 0x00717F00 0x00013900
+		# : BY PASS PLL
+		# Register : VPLL_CTRL @ 0XFD1A0038

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000008U)  */
+    mask_write 0XFD1A0038 0x00000008 0x00000008
+		# : ASSERT RESET
+		# Register : VPLL_CTRL @ 0XFD1A0038

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRF_APB_VPLL_CTRL_RESET                                                     1
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD1A0038 0x00000001 0x00000001
+		# : DEASSERT RESET
+		# Register : VPLL_CTRL @ 0XFD1A0038

+
+		# Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		# PSU_CRF_APB_VPLL_CTRL_RESET                                                     0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFD1A0038 0x00000001 0x00000000
+		# : CHECK PLL STATUS
+		# Register : PLL_STATUS @ 0XFD1A0044

+
+		# VPLL is locked
+		# PSU_CRF_APB_PLL_STATUS_VPLL_LOCK                                                1
+    mask_poll 0XFD1A0044 0x00000004
+		# : REMOVE PLL BY PASS
+		# Register : VPLL_CTRL @ 0XFD1A0038

+
+		# Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		# cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    0
+
+		# PLL Basic Control
+		#(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFD1A0038 0x00000008 0x00000000
+		# Register : VPLL_TO_LPD_CTRL @ 0XFD1A0050

+
+		# Divisor value for this clock.
+		# PSU_CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		# Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		#(OFFSET, MASK, VALUE)      (0XFD1A0050, 0x00003F00U ,0x00000300U)  */
+    mask_write 0XFD1A0050 0x00003F00 0x00000300
+		# : VIDEO FRAC CFG
+		# Register : VPLL_FRAC_CFG @ 0XFD1A0040

+
+		# Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		#  mode and uses DATA of this register for the fractional portion of the feedback divider.
+		# PSU_CRF_APB_VPLL_FRAC_CFG_ENABLED                                               0x1
+
+		# Fractional value for the Feedback value.
+		# PSU_CRF_APB_VPLL_FRAC_CFG_DATA                                                  0x820c
+
+		# Fractional control for the PLL
+		#(OFFSET, MASK, VALUE)      (0XFD1A0040, 0x8000FFFFU ,0x8000820CU)  */
+    mask_write 0XFD1A0040 0x8000FFFF 0x8000820C
+}
+
+set psu_clock_init_data {
+		# : CLOCK CONTROL SLCR REGISTER
+		# Register : GEM0_REF_CTRL @ 0XFF5E0050

+
+		# Clock active for the RX channel
+		# PSU_CRL_APB_GEM0_REF_CTRL_RX_CLKACT                                             0x1
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_GEM0_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR0                                              0x8
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_GEM0_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0050, 0x063F3F07U ,0x06010800U)  */
+    mask_write 0XFF5E0050 0x063F3F07 0x06010800
+		# Register : GEM1_REF_CTRL @ 0XFF5E0054

+
+		# Clock active for the RX channel
+		# PSU_CRL_APB_GEM1_REF_CTRL_RX_CLKACT                                             0x1
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_GEM1_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR0                                              0x8
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_GEM1_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0054, 0x063F3F07U ,0x06010800U)  */
+    mask_write 0XFF5E0054 0x063F3F07 0x06010800
+		# Register : GEM2_REF_CTRL @ 0XFF5E0058

+
+		# Clock active for the RX channel
+		# PSU_CRL_APB_GEM2_REF_CTRL_RX_CLKACT                                             0x1
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_GEM2_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR0                                              0x8
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_GEM2_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0058, 0x063F3F07U ,0x06010800U)  */
+    mask_write 0XFF5E0058 0x063F3F07 0x06010800
+		# Register : GEM3_REF_CTRL @ 0XFF5E005C

+
+		# Clock active for the RX channel
+		# PSU_CRL_APB_GEM3_REF_CTRL_RX_CLKACT                                             0x1
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_GEM3_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR0                                              0xc
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_GEM3_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E005C, 0x063F3F07U ,0x06010C00U)  */
+    mask_write 0XFF5E005C 0x063F3F07 0x06010C00
+		# Register : GEM_TSU_REF_CTRL @ 0XFF5E0100

+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0                                           0x6
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_GEM_TSU_REF_CTRL_SRCSEL                                             0x2
+
+		# 6 bit divider
+		# PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1                                           0x1
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_GEM_TSU_REF_CTRL_CLKACT                                             0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0100, 0x013F3F07U ,0x01010602U)  */
+    mask_write 0XFF5E0100 0x013F3F07 0x01010602
+		# Register : USB0_BUS_REF_CTRL @ 0XFF5E0060

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_USB0_BUS_REF_CTRL_CLKACT                                            0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1                                          0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0                                          0x6
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_USB0_BUS_REF_CTRL_SRCSEL                                            0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0060, 0x023F3F07U ,0x02010600U)  */
+    mask_write 0XFF5E0060 0x023F3F07 0x02010600
+		# Register : USB1_BUS_REF_CTRL @ 0XFF5E0064

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_USB1_BUS_REF_CTRL_CLKACT                                            0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1                                          0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0                                          0x4
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_USB1_BUS_REF_CTRL_SRCSEL                                            0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0064, 0x023F3F07U ,0x02010400U)  */
+    mask_write 0XFF5E0064 0x023F3F07 0x02010400
+		# Register : USB3_DUAL_REF_CTRL @ 0XFF5E004C

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_USB3_DUAL_REF_CTRL_CLKACT                                           0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1                                         0xf
+
+		# 6 bit divider
+		# PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0                                         0x5
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL. (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL                                           0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E004C, 0x023F3F07U ,0x020F0500U)  */
+    mask_write 0XFF5E004C 0x023F3F07 0x020F0500
+		# Register : QSPI_REF_CTRL @ 0XFF5E0068

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_QSPI_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR0                                              0xc
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_QSPI_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0068, 0x013F3F07U ,0x01010C00U)  */
+    mask_write 0XFF5E0068 0x013F3F07 0x01010C00
+		# Register : SDIO0_REF_CTRL @ 0XFF5E006C

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_SDIO0_REF_CTRL_CLKACT                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR1                                             0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR0                                             0x7
+
+		# 000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_SDIO0_REF_CTRL_SRCSEL                                               0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E006C, 0x013F3F07U ,0x01010702U)  */
+    mask_write 0XFF5E006C 0x013F3F07 0x01010702
+		# Register : SDIO1_REF_CTRL @ 0XFF5E0070

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_SDIO1_REF_CTRL_CLKACT                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR1                                             0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR0                                             0x6
+
+		# 000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_SDIO1_REF_CTRL_SRCSEL                                               0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0070, 0x013F3F07U ,0x01010602U)  */
+    mask_write 0XFF5E0070 0x013F3F07 0x01010602
+		# Register : SDIO_CLK_CTRL @ 0XFF18030C

+
+		# MIO pad selection for sdio1_rx_clk (feedback clock from the PAD) 0: MIO [51] 1: MIO [76]
+		# PSU_IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL                                     0
+
+		# SoC Debug Clock Control
+		#(OFFSET, MASK, VALUE)      (0XFF18030C, 0x00020000U ,0x00000000U)  */
+    mask_write 0XFF18030C 0x00020000 0x00000000
+		# Register : UART0_REF_CTRL @ 0XFF5E0074

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_UART0_REF_CTRL_CLKACT                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_UART0_REF_CTRL_DIVISOR1                                             0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_UART0_REF_CTRL_DIVISOR0                                             0xf
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_UART0_REF_CTRL_SRCSEL                                               0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0074, 0x013F3F07U ,0x01010F00U)  */
+    mask_write 0XFF5E0074 0x013F3F07 0x01010F00
+		# Register : UART1_REF_CTRL @ 0XFF5E0078

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_UART1_REF_CTRL_CLKACT                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_UART1_REF_CTRL_DIVISOR1                                             0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_UART1_REF_CTRL_DIVISOR0                                             0xf
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_UART1_REF_CTRL_SRCSEL                                               0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0078, 0x013F3F07U ,0x01010F00U)  */
+    mask_write 0XFF5E0078 0x013F3F07 0x01010F00
+		# Register : I2C0_REF_CTRL @ 0XFF5E0120

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_I2C0_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR0                                              0xf
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_I2C0_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0120, 0x013F3F07U ,0x01010F00U)  */
+    mask_write 0XFF5E0120 0x013F3F07 0x01010F00
+		# Register : I2C1_REF_CTRL @ 0XFF5E0124

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_I2C1_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR0                                              0xf
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_I2C1_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0124, 0x013F3F07U ,0x01010F00U)  */
+    mask_write 0XFF5E0124 0x013F3F07 0x01010F00
+		# Register : SPI0_REF_CTRL @ 0XFF5E007C

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_SPI0_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR0                                              0x7
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_SPI0_REF_CTRL_SRCSEL                                                0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E007C, 0x013F3F07U ,0x01010702U)  */
+    mask_write 0XFF5E007C 0x013F3F07 0x01010702
+		# Register : SPI1_REF_CTRL @ 0XFF5E0080

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_SPI1_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR0                                              0x7
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_SPI1_REF_CTRL_SRCSEL                                                0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0080, 0x013F3F07U ,0x01010702U)  */
+    mask_write 0XFF5E0080 0x013F3F07 0x01010702
+		# Register : CAN0_REF_CTRL @ 0XFF5E0084

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_CAN0_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR0                                              0xa
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_CAN0_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0084, 0x013F3F07U ,0x01010A00U)  */
+    mask_write 0XFF5E0084 0x013F3F07 0x01010A00
+		# Register : CAN1_REF_CTRL @ 0XFF5E0088

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_CAN1_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR0                                              0xf
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_CAN1_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0088, 0x013F3F07U ,0x01010F00U)  */
+    mask_write 0XFF5E0088 0x013F3F07 0x01010F00
+		# Register : CPU_R5_CTRL @ 0XFF5E0090

+
+		# Turing this off will shut down the OCM, some parts of the APM, and prevent transactions going from the FPD to the LPD and cou
+		# d lead to system hang
+		# PSU_CRL_APB_CPU_R5_CTRL_CLKACT                                                  0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_CPU_R5_CTRL_DIVISOR0                                                0x3
+
+		# 000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_CPU_R5_CTRL_SRCSEL                                                  0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0090, 0x01003F07U ,0x01000302U)  */
+    mask_write 0XFF5E0090 0x01003F07 0x01000302
+		# Register : IOU_SWITCH_CTRL @ 0XFF5E009C

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_IOU_SWITCH_CTRL_CLKACT                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_IOU_SWITCH_CTRL_DIVISOR0                                            0x6
+
+		# 000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_IOU_SWITCH_CTRL_SRCSEL                                              0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E009C, 0x01003F07U ,0x01000602U)  */
+    mask_write 0XFF5E009C 0x01003F07 0x01000602
+		# Register : CSU_PLL_CTRL @ 0XFF5E00A0

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_CSU_PLL_CTRL_CLKACT                                                 0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_CSU_PLL_CTRL_DIVISOR0                                               0x3
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_CSU_PLL_CTRL_SRCSEL                                                 0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00A0, 0x01003F07U ,0x01000302U)  */
+    mask_write 0XFF5E00A0 0x01003F07 0x01000302
+		# Register : PCAP_CTRL @ 0XFF5E00A4

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_PCAP_CTRL_CLKACT                                                    0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PCAP_CTRL_DIVISOR0                                                  0x6
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_PCAP_CTRL_SRCSEL                                                    0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00A4, 0x01003F07U ,0x01000602U)  */
+    mask_write 0XFF5E00A4 0x01003F07 0x01000602
+		# Register : LPD_SWITCH_CTRL @ 0XFF5E00A8

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_LPD_SWITCH_CTRL_CLKACT                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_LPD_SWITCH_CTRL_DIVISOR0                                            0x3
+
+		# 000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_LPD_SWITCH_CTRL_SRCSEL                                              0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00A8, 0x01003F07U ,0x01000302U)  */
+    mask_write 0XFF5E00A8 0x01003F07 0x01000302
+		# Register : LPD_LSBUS_CTRL @ 0XFF5E00AC

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_LPD_LSBUS_CTRL_CLKACT                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_LPD_LSBUS_CTRL_DIVISOR0                                             0xf
+
+		# 000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_LPD_LSBUS_CTRL_SRCSEL                                               0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00AC, 0x01003F07U ,0x01000F02U)  */
+    mask_write 0XFF5E00AC 0x01003F07 0x01000F02
+		# Register : DBG_LPD_CTRL @ 0XFF5E00B0

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_DBG_LPD_CTRL_CLKACT                                                 0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_DBG_LPD_CTRL_DIVISOR0                                               0x6
+
+		# 000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_DBG_LPD_CTRL_SRCSEL                                                 0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00B0, 0x01003F07U ,0x01000602U)  */
+    mask_write 0XFF5E00B0 0x01003F07 0x01000602
+		# Register : NAND_REF_CTRL @ 0XFF5E00B4

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_NAND_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_NAND_REF_CTRL_DIVISOR1                                              0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_NAND_REF_CTRL_DIVISOR0                                              0xa
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_NAND_REF_CTRL_SRCSEL                                                0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00B4, 0x013F3F07U ,0x01010A00U)  */
+    mask_write 0XFF5E00B4 0x013F3F07 0x01010A00
+		# Register : ADMA_REF_CTRL @ 0XFF5E00B8

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_ADMA_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_ADMA_REF_CTRL_DIVISOR0                                              0x3
+
+		# 000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_ADMA_REF_CTRL_SRCSEL                                                0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00B8, 0x01003F07U ,0x01000302U)  */
+    mask_write 0XFF5E00B8 0x01003F07 0x01000302
+		# Register : PL0_REF_CTRL @ 0XFF5E00C0

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_PL0_REF_CTRL_CLKACT                                                 0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL0_REF_CTRL_DIVISOR1                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL0_REF_CTRL_DIVISOR0                                               0xf
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_PL0_REF_CTRL_SRCSEL                                                 0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00C0, 0x013F3F07U ,0x01010F00U)  */
+    mask_write 0XFF5E00C0 0x013F3F07 0x01010F00
+		# Register : PL1_REF_CTRL @ 0XFF5E00C4

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_PL1_REF_CTRL_CLKACT                                                 0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL1_REF_CTRL_DIVISOR1                                               0x4
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL1_REF_CTRL_DIVISOR0                                               0xf
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_PL1_REF_CTRL_SRCSEL                                                 0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00C4, 0x013F3F07U ,0x01040F00U)  */
+    mask_write 0XFF5E00C4 0x013F3F07 0x01040F00
+		# Register : PL2_REF_CTRL @ 0XFF5E00C8

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_PL2_REF_CTRL_CLKACT                                                 0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL2_REF_CTRL_DIVISOR1                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL2_REF_CTRL_DIVISOR0                                               0x4
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_PL2_REF_CTRL_SRCSEL                                                 0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00C8, 0x013F3F07U ,0x01010402U)  */
+    mask_write 0XFF5E00C8 0x013F3F07 0x01010402
+		# Register : PL3_REF_CTRL @ 0XFF5E00CC

+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_PL3_REF_CTRL_CLKACT                                                 0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL3_REF_CTRL_DIVISOR1                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_PL3_REF_CTRL_DIVISOR0                                               0x3
+
+		# 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_PL3_REF_CTRL_SRCSEL                                                 0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E00CC, 0x013F3F07U ,0x01010302U)  */
+    mask_write 0XFF5E00CC 0x013F3F07 0x01010302
+		# Register : AMS_REF_CTRL @ 0XFF5E0108

+
+		# 6 bit divider
+		# PSU_CRL_APB_AMS_REF_CTRL_DIVISOR1                                               0x1
+
+		# 6 bit divider
+		# PSU_CRL_APB_AMS_REF_CTRL_DIVISOR0                                               0x1d
+
+		# 000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		# clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_AMS_REF_CTRL_SRCSEL                                                 0x2
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_AMS_REF_CTRL_CLKACT                                                 0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0108, 0x013F3F07U ,0x01011D02U)  */
+    mask_write 0XFF5E0108 0x013F3F07 0x01011D02
+		# Register : DLL_REF_CTRL @ 0XFF5E0104

+
+		# 000 = IOPLL; 001 = RPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This
+		# is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_DLL_REF_CTRL_SRCSEL                                                 0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0104, 0x00000007U ,0x00000000U)  */
+    mask_write 0XFF5E0104 0x00000007 0x00000000
+		# Register : TIMESTAMP_REF_CTRL @ 0XFF5E0128

+
+		# 6 bit divider
+		# PSU_CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0                                         0xf
+
+		# 1XX = pss_ref_clk; 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 
+		#  cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL                                           0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT                                           0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFF5E0128, 0x01003F07U ,0x01000F00U)  */
+    mask_write 0XFF5E0128 0x01003F07 0x01000F00
+		# Register : SATA_REF_CTRL @ 0XFD1A00A0

+
+		# 000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		# he new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_SATA_REF_CTRL_SRCSEL                                                0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_SATA_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRF_APB_SATA_REF_CTRL_DIVISOR0                                              0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00A0, 0x01003F07U ,0x01000200U)  */
+    mask_write 0XFD1A00A0 0x01003F07 0x01000200
+		# Register : PCIE_REF_CTRL @ 0XFD1A00B4

+
+		# 000 = IOPLL_TO_FPD; 010 = RPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cyc
+		# es of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_PCIE_REF_CTRL_SRCSEL                                                0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_PCIE_REF_CTRL_CLKACT                                                0x1
+
+		# 6 bit divider
+		# PSU_CRF_APB_PCIE_REF_CTRL_DIVISOR0                                              0x2
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00B4, 0x01003F07U ,0x01000200U)  */
+    mask_write 0XFD1A00B4 0x01003F07 0x01000200
+		# Register : DP_VIDEO_REF_CTRL @ 0XFD1A0070

+
+		# 6 bit divider
+		# PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1                                          0x1
+
+		# 6 bit divider
+		# PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0                                          0x3
+
+		# 000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		# ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL                                            0x3
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_DP_VIDEO_REF_CTRL_CLKACT                                            0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A0070, 0x013F3F07U ,0x01010303U)  */
+    mask_write 0XFD1A0070 0x013F3F07 0x01010303
+		# Register : DP_AUDIO_REF_CTRL @ 0XFD1A0074

+
+		# 6 bit divider
+		# PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1                                          0x1
+
+		# 6 bit divider
+		# PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0                                          0x27
+
+		# 000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		# ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL                                            0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_DP_AUDIO_REF_CTRL_CLKACT                                            0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A0074, 0x013F3F07U ,0x01012700U)  */
+    mask_write 0XFD1A0074 0x013F3F07 0x01012700
+		# Register : DP_STC_REF_CTRL @ 0XFD1A007C

+
+		# 6 bit divider
+		# PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR1                                            0x1
+
+		# 6 bit divider
+		# PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR0                                            0x11
+
+		# 000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of t
+		# e new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DP_STC_REF_CTRL_SRCSEL                                              0x3
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_DP_STC_REF_CTRL_CLKACT                                              0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A007C, 0x013F3F07U ,0x01011103U)  */
+    mask_write 0XFD1A007C 0x013F3F07 0x01011103
+		# Register : ACPU_CTRL @ 0XFD1A0060

+
+		# 6 bit divider
+		# PSU_CRF_APB_ACPU_CTRL_DIVISOR0                                                  0x1
+
+		# 000 = APLL; 010 = DPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		# lock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_ACPU_CTRL_SRCSEL                                                    0x0
+
+		# Clock active signal. Switch to 0 to disable the clock. For the half speed APU Clock
+		# PSU_CRF_APB_ACPU_CTRL_CLKACT_HALF                                               0x1
+
+		# Clock active signal. Switch to 0 to disable the clock. For the full speed ACPUX Clock. This will shut off the high speed cloc
+		#  to the entire APU
+		# PSU_CRF_APB_ACPU_CTRL_CLKACT_FULL                                               0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A0060, 0x03003F07U ,0x03000100U)  */
+    mask_write 0XFD1A0060 0x03003F07 0x03000100
+		# Register : DBG_TRACE_CTRL @ 0XFD1A0064

+
+		# 6 bit divider
+		# PSU_CRF_APB_DBG_TRACE_CTRL_DIVISOR0                                             0x2
+
+		# 000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		# he new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DBG_TRACE_CTRL_SRCSEL                                               0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_DBG_TRACE_CTRL_CLKACT                                               0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A0064, 0x01003F07U ,0x01000200U)  */
+    mask_write 0XFD1A0064 0x01003F07 0x01000200
+		# Register : DBG_FPD_CTRL @ 0XFD1A0068

+
+		# 6 bit divider
+		# PSU_CRF_APB_DBG_FPD_CTRL_DIVISOR0                                               0x2
+
+		# 000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		# he new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DBG_FPD_CTRL_SRCSEL                                                 0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_DBG_FPD_CTRL_CLKACT                                                 0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A0068, 0x01003F07U ,0x01000200U)  */
+    mask_write 0XFD1A0068 0x01003F07 0x01000200
+		# Register : DDR_CTRL @ 0XFD1A0080

+
+		# 6 bit divider
+		# PSU_CRF_APB_DDR_CTRL_DIVISOR0                                                   0x2
+
+		# 000 = DPLL; 001 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This 
+		# s not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DDR_CTRL_SRCSEL                                                     0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A0080, 0x00003F07U ,0x00000200U)  */
+    mask_write 0XFD1A0080 0x00003F07 0x00000200
+		# Register : GPU_REF_CTRL @ 0XFD1A0084

+
+		# 6 bit divider
+		# PSU_CRF_APB_GPU_REF_CTRL_DIVISOR0                                               0x1
+
+		# 000 = IOPLL_TO_FPD; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		# he new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_GPU_REF_CTRL_SRCSEL                                                 0x0
+
+		# Clock active signal. Switch to 0 to disable the clock, which will stop clock for GPU (and both Pixel Processors).
+		# PSU_CRF_APB_GPU_REF_CTRL_CLKACT                                                 0x1
+
+		# Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
+		# PSU_CRF_APB_GPU_REF_CTRL_PP0_CLKACT                                             0x1
+
+		# Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
+		# PSU_CRF_APB_GPU_REF_CTRL_PP1_CLKACT                                             0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A0084, 0x07003F07U ,0x07000100U)  */
+    mask_write 0XFD1A0084 0x07003F07 0x07000100
+		# Register : GDMA_REF_CTRL @ 0XFD1A00B8

+
+		# 6 bit divider
+		# PSU_CRF_APB_GDMA_REF_CTRL_DIVISOR0                                              0x2
+
+		# 000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		# lock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_GDMA_REF_CTRL_SRCSEL                                                0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_GDMA_REF_CTRL_CLKACT                                                0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00B8, 0x01003F07U ,0x01000200U)  */
+    mask_write 0XFD1A00B8 0x01003F07 0x01000200
+		# Register : DPDMA_REF_CTRL @ 0XFD1A00BC

+
+		# 6 bit divider
+		# PSU_CRF_APB_DPDMA_REF_CTRL_DIVISOR0                                             0x2
+
+		# 000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		# lock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DPDMA_REF_CTRL_SRCSEL                                               0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_DPDMA_REF_CTRL_CLKACT                                               0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00BC, 0x01003F07U ,0x01000200U)  */
+    mask_write 0XFD1A00BC 0x01003F07 0x01000200
+		# Register : TOPSW_MAIN_CTRL @ 0XFD1A00C0

+
+		# 6 bit divider
+		# PSU_CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0                                            0x2
+
+		# 000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		# lock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_TOPSW_MAIN_CTRL_SRCSEL                                              0x2
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_TOPSW_MAIN_CTRL_CLKACT                                              0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00C0, 0x01003F07U ,0x01000202U)  */
+    mask_write 0XFD1A00C0 0x01003F07 0x01000202
+		# Register : TOPSW_LSBUS_CTRL @ 0XFD1A00C4

+
+		# 6 bit divider
+		# PSU_CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0                                           0x5
+
+		# 000 = APLL; 010 = IOPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		# he new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL                                             0x2
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_TOPSW_LSBUS_CTRL_CLKACT                                             0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00C4, 0x01003F07U ,0x01000502U)  */
+    mask_write 0XFD1A00C4 0x01003F07 0x01000502
+		# Register : GTGREF0_REF_CTRL @ 0XFD1A00C8

+
+		# 6 bit divider
+		# PSU_CRF_APB_GTGREF0_REF_CTRL_DIVISOR0                                           0x4
+
+		# 000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		# he new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_GTGREF0_REF_CTRL_SRCSEL                                             0x0
+
+		# Clock active signal. Switch to 0 to disable the clock
+		# PSU_CRF_APB_GTGREF0_REF_CTRL_CLKACT                                             0x1
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00C8, 0x01003F07U ,0x01000400U)  */
+    mask_write 0XFD1A00C8 0x01003F07 0x01000400
+		# Register : DBG_TSTMP_CTRL @ 0XFD1A00F8

+
+		# 6 bit divider
+		# PSU_CRF_APB_DBG_TSTMP_CTRL_DIVISOR0                                             0x2
+
+		# 000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		# he new clock. This is not usually an issue, but designers must be aware.)
+		# PSU_CRF_APB_DBG_TSTMP_CTRL_SRCSEL                                               0x0
+
+		# This register controls this reference clock
+		#(OFFSET, MASK, VALUE)      (0XFD1A00F8, 0x00003F07U ,0x00000200U)  */
+    mask_write 0XFD1A00F8 0x00003F07 0x00000200
+		# Register : IOU_TTC_APB_CLK @ 0XFF180380

+
+		# 00" = Select the APB switch clock for the APB interface of TTC0'01" = Select the PLL ref clock for the APB interface of TTC0'
+		# 0" = Select the R5 clock for the APB interface of TTC0
+		# PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL                                           0
+
+		# 00" = Select the APB switch clock for the APB interface of TTC1'01" = Select the PLL ref clock for the APB interface of TTC1'
+		# 0" = Select the R5 clock for the APB interface of TTC1
+		# PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL                                           0
+
+		# 00" = Select the APB switch clock for the APB interface of TTC2'01" = Select the PLL ref clock for the APB interface of TTC2'
+		# 0" = Select the R5 clock for the APB interface of TTC2
+		# PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL                                           0
+
+		# 00" = Select the APB switch clock for the APB interface of TTC3'01" = Select the PLL ref clock for the APB interface of TTC3'
+		# 0" = Select the R5 clock for the APB interface of TTC3
+		# PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL                                           0
+
+		# TTC APB clock select
+		#(OFFSET, MASK, VALUE)      (0XFF180380, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFF180380 0x000000FF 0x00000000
+		# Register : WDT_CLK_SEL @ 0XFD610100

+
+		# System watchdog timer clock source selection: 0: Internal APB clock 1: External (PL clock via EMIO or Pinout clock via MIO)
+		# PSU_FPD_SLCR_WDT_CLK_SEL_SELECT                                                 0
+
+		# SWDT clock source select
+		#(OFFSET, MASK, VALUE)      (0XFD610100, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFD610100 0x00000001 0x00000000
+		# Register : WDT_CLK_SEL @ 0XFF180300

+
+		# System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock from PL via EMIO, or from pinout 
+		# ia MIO
+		# PSU_IOU_SLCR_WDT_CLK_SEL_SELECT                                                 0
+
+		# SWDT clock source select
+		#(OFFSET, MASK, VALUE)      (0XFF180300, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFF180300 0x00000001 0x00000000
+		# Register : CSUPMU_WDT_CLK_SEL @ 0XFF410050

+
+		# System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock pss_ref_clk
+		# PSU_LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT                                          0
+
+		# SWDT clock source select
+		#(OFFSET, MASK, VALUE)      (0XFF410050, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFF410050 0x00000001 0x00000000
+}
+
+set psu_ddr_init_data {
+		# : DDR INITIALIZATION
+		# : DDR CONTROLLER RESET
+		# Register : RST_DDR_SS @ 0XFD1A0108

+
+		# DDR block level reset inside of the DDR Sub System
+		# PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X1
+
+		# DDR sub system block level reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000008U)  */
+    mask_write 0XFD1A0108 0x00000008 0x00000008
+		# Register : MSTR @ 0XFD070000

+
+		# Indicates the configuration of the device used in the system. - 00 - x4 device - 01 - x8 device - 10 - x16 device - 11 - x32 
+		# evice
+		# PSU_DDRC_MSTR_DEVICE_CONFIG                                                     0x1
+
+		# Choose which registers are used. - 0 - Original registers - 1 - Shadow registers
+		# PSU_DDRC_MSTR_FREQUENCY_MODE                                                    0x0
+
+		# Only present for multi-rank configurations. Each bit represents one rank. For two-rank configurations, only bits[25:24] are p
+		# esent. - 1 - populated - 0 - unpopulated LSB is the lowest rank number. For 2 ranks following combinations are legal: - 01 - 
+		# ne rank - 11 - Two ranks - Others - Reserved. For 4 ranks following combinations are legal: - 0001 - One rank - 0011 - Two ra
+		# ks - 1111 - Four ranks
+		# PSU_DDRC_MSTR_ACTIVE_RANKS                                                      0x1
+
+		# SDRAM burst length used: - 0001 - Burst length of 2 (only supported for mDDR) - 0010 - Burst length of 4 - 0100 - Burst lengt
+		#  of 8 - 1000 - Burst length of 16 (only supported for mDDR, LPDDR2, and LPDDR4) All other values are reserved. This controls 
+		# he burst size used to access the SDRAM. This must match the burst length mode register setting in the SDRAM. (For BC4/8 on-th
+		# -fly mode of DDR3 and DDR4, set this field to 0x0100) Burst length of 2 is not supported with AXI ports when MEMC_BURST_LENGT
+		#  is 8. Burst length of 2 is only supported with MEMC_FREQ_RATIO = 1
+		# PSU_DDRC_MSTR_BURST_RDWR                                                        0x4
+
+		# Set to 1 when the uMCTL2 and DRAM has to be put in DLL-off mode for low frequency operation. Set to 0 to put uMCTL2 and DRAM 
+		# n DLL-on mode for normal frequency operation. If DDR4 CRC/parity retry is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), d
+		# l_off_mode is not supported, and this bit must be set to '0'.
+		# PSU_DDRC_MSTR_DLL_OFF_MODE                                                      0x0
+
+		# Selects proportion of DQ bus width that is used by the SDRAM - 00 - Full DQ bus width to SDRAM - 01 - Half DQ bus width to SD
+		# AM - 10 - Quarter DQ bus width to SDRAM - 11 - Reserved. Note that half bus width mode is only supported when the SDRAM bus w
+		# dth is a multiple of 16, and quarter bus width mode is only supported when the SDRAM bus width is a multiple of 32 and the co
+		# figuration parameter MEMC_QBUS_SUPPORT is set. Bus width refers to DQ bus width (excluding any ECC width).
+		# PSU_DDRC_MSTR_DATA_BUS_WIDTH                                                    0x0
+
+		# 1 indicates put the DRAM in geardown mode (2N) and 0 indicates put the DRAM in normal mode (1N). This register can be changed
+		#  only when the Controller is in self-refresh mode. This signal must be set the same value as MR3 bit A3. Note: Geardown mode 
+		# s not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set
+		# PSU_DDRC_MSTR_GEARDOWN_MODE                                                     0x0
+
+		# If 1, then uMCTL2 uses 2T timing. Otherwise, uses 1T timing. In 2T timing, all command signals (except chip select) are held 
+		# or 2 clocks on the SDRAM bus. Chip select is asserted on the second cycle of the command Note: 2T timing is not supported in 
+		# PDDR2/LPDDR3/LPDDR4 mode Note: 2T timing is not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set Note: 2T ti
+		# ing is not supported in DDR4 geardown mode.
+		# PSU_DDRC_MSTR_EN_2T_TIMING_MODE                                                 0x0
+
+		# When set, enable burst-chop in DDR3/DDR4. Burst Chop for Reads is exercised only in HIF configurations (UMCTL2_INCL_ARB not s
+		# t) and if in full bus width mode (MSTR.data_bus_width = 00). Burst Chop for Writes is exercised only if Partial Writes enable
+		#  (UMCTL2_PARTIAL_WR=1) and if CRC is disabled (CRCPARCTL1.crc_enable = 0). If DDR4 CRC/parity retry is enabled (CRCPARCTL1.cr
+		# _parity_retry_enable = 1), burst chop is not supported, and this bit must be set to '0'
+		# PSU_DDRC_MSTR_BURSTCHOP                                                         0x0
+
+		# Select LPDDR4 SDRAM - 1 - LPDDR4 SDRAM device in use. - 0 - non-LPDDR4 device in use Present only in designs configured to su
+		# port LPDDR4.
+		# PSU_DDRC_MSTR_LPDDR4                                                            0x0
+
+		# Select DDR4 SDRAM - 1 - DDR4 SDRAM device in use. - 0 - non-DDR4 device in use Present only in designs configured to support 
+		# DR4.
+		# PSU_DDRC_MSTR_DDR4                                                              0x1
+
+		# Select LPDDR3 SDRAM - 1 - LPDDR3 SDRAM device in use. - 0 - non-LPDDR3 device in use Present only in designs configured to su
+		# port LPDDR3.
+		# PSU_DDRC_MSTR_LPDDR3                                                            0x0
+
+		# Select LPDDR2 SDRAM - 1 - LPDDR2 SDRAM device in use. - 0 - non-LPDDR2 device in use Present only in designs configured to su
+		# port LPDDR2.
+		# PSU_DDRC_MSTR_LPDDR2                                                            0x0
+
+		# Select DDR3 SDRAM - 1 - DDR3 SDRAM device in use - 0 - non-DDR3 SDRAM device in use Only present in designs that support DDR3
+		# 
+		# PSU_DDRC_MSTR_DDR3                                                              0x0
+
+		# Master Register
+		#(OFFSET, MASK, VALUE)      (0XFD070000, 0xE30FBE3DU ,0x41040010U)  */
+    mask_write 0XFD070000 0xE30FBE3D 0x41040010
+		# Register : MRCTRL0 @ 0XFD070010

+
+		# Setting this register bit to 1 triggers a mode register read or write operation. When the MR operation is complete, the uMCTL
+		#  automatically clears this bit. The other register fields of this register must be written in a separate APB transaction, bef
+		# re setting this mr_wr bit. It is recommended NOT to set this signal if in Init, Deep power-down or MPSM operating modes.
+		# PSU_DDRC_MRCTRL0_MR_WR                                                          0x0
+
+		# Address of the mode register that is to be written to. - 0000 - MR0 - 0001 - MR1 - 0010 - MR2 - 0011 - MR3 - 0100 - MR4 - 010
+		#  - MR5 - 0110 - MR6 - 0111 - MR7 Don't Care for LPDDR2/LPDDR3/LPDDR4 (see MRCTRL1.mr_data for mode register addressing in LPD
+		# R2/LPDDR3/LPDDR4) This signal is also used for writing to control words of RDIMMs. In that case, it corresponds to the bank a
+		# dress bits sent to the RDIMM In case of DDR4, the bit[3:2] corresponds to the bank group bits. Therefore, the bit[3] as well 
+		# s the bit[2:0] must be set to an appropriate value which is considered both the Address Mirroring of UDIMMs/RDIMMs and the Ou
+		# put Inversion of RDIMMs.
+		# PSU_DDRC_MRCTRL0_MR_ADDR                                                        0x0
+
+		# Controls which rank is accessed by MRCTRL0.mr_wr. Normally, it is desired to access all ranks, so all bits should be set to 1
+		#  However, for multi-rank UDIMMs/RDIMMs which implement address mirroring, it may be necessary to access ranks individually. E
+		# amples (assume uMCTL2 is configured for 4 ranks): - 0x1 - select rank 0 only - 0x2 - select rank 1 only - 0x5 - select ranks 
+		#  and 2 - 0xA - select ranks 1 and 3 - 0xF - select ranks 0, 1, 2 and 3
+		# PSU_DDRC_MRCTRL0_MR_RANK                                                        0x3
+
+		# Indicates whether Software intervention is allowed via MRCTRL0/MRCTRL1 before automatic SDRAM initialization routine or not. 
+		# or DDR4, this bit can be used to initialize the DDR4 RCD (MR7) before automatic SDRAM initialization. For LPDDR4, this bit ca
+		#  be used to program additional mode registers before automatic SDRAM initialization if necessary. Note: This must be cleared 
+		# o 0 after completing Software operation. Otherwise, SDRAM initialization routine will not re-start. - 0 - Software interventi
+		# n is not allowed - 1 - Software intervention is allowed
+		# PSU_DDRC_MRCTRL0_SW_INIT_INT                                                    0x0
+
+		# Indicates whether the mode register operation is MRS in PDA mode or not - 0 - MRS - 1 - MRS in Per DRAM Addressability mode
+		# PSU_DDRC_MRCTRL0_PDA_EN                                                         0x0
+
+		# Indicates whether the mode register operation is MRS or WR/RD for MPR (only supported for DDR4) - 0 - MRS - 1 - WR/RD for MPR
+		# PSU_DDRC_MRCTRL0_MPR_EN                                                         0x0
+
+		# Indicates whether the mode register operation is read or write. Only used for LPDDR2/LPDDR3/LPDDR4/DDR4. - 0 - Write - 1 - Re
+		# d
+		# PSU_DDRC_MRCTRL0_MR_TYPE                                                        0x0
+
+		# Mode Register Read/Write Control Register 0. Note: Do not enable more than one of the following fields simultaneously: - sw_i
+		# it_int - pda_en - mpr_en
+		#(OFFSET, MASK, VALUE)      (0XFD070010, 0x8000F03FU ,0x00000030U)  */
+    mask_write 0XFD070010 0x8000F03F 0x00000030
+		# Register : DERATEEN @ 0XFD070020

+
+		# Derate value of tRC for LPDDR4 - 0 - Derating uses +1. - 1 - Derating uses +2. - 2 - Derating uses +3. - 3 - Derating uses +4
+		#  Present only in designs configured to support LPDDR4. The required number of cycles for derating can be determined by dividi
+		# g 3.75ns by the core_ddrc_core_clk period, and rounding up the next integer.
+		# PSU_DDRC_DERATEEN_RC_DERATE_VALUE                                               0x3
+
+		# Derate byte Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 Indicates which byte of the MRR data is used f
+		# r derating. The maximum valid value depends on MEMC_DRAM_TOTAL_DATA_WIDTH.
+		# PSU_DDRC_DERATEEN_DERATE_BYTE                                                   0x0
+
+		# Derate value - 0 - Derating uses +1. - 1 - Derating uses +2. Present only in designs configured to support LPDDR2/LPDDR3/LPDD
+		# 4 Set to 0 for all LPDDR2 speed grades as derating value of +1.875 ns is less than a core_ddrc_core_clk period. Can be 0 or 1
+		# for LPDDR3/LPDDR4, depending if +1.875 ns is less than a core_ddrc_core_clk period or not.
+		# PSU_DDRC_DERATEEN_DERATE_VALUE                                                  0x0
+
+		# Enables derating - 0 - Timing parameter derating is disabled - 1 - Timing parameter derating is enabled using MR4 read value.
+		# Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 This field must be set to '0' for non-LPDDR2/LPDDR3/LPDDR4
+		# mode.
+		# PSU_DDRC_DERATEEN_DERATE_ENABLE                                                 0x0
+
+		# Temperature Derate Enable Register
+		#(OFFSET, MASK, VALUE)      (0XFD070020, 0x000003F3U ,0x00000300U)  */
+    mask_write 0XFD070020 0x000003F3 0x00000300
+		# Register : DERATEINT @ 0XFD070024

+
+		# Interval between two MR4 reads, used to derate the timing parameters. Present only in designs configured to support LPDDR2/LP
+		# DR3/LPDDR4. This register must not be set to zero
+		# PSU_DDRC_DERATEINT_MR4_READ_INTERVAL                                            0x800000
+
+		# Temperature Derate Interval Register
+		#(OFFSET, MASK, VALUE)      (0XFD070024, 0xFFFFFFFFU ,0x00800000U)  */
+    mask_write 0XFD070024 0xFFFFFFFF 0x00800000
+		# Register : PWRCTL @ 0XFD070030

+
+		# Self refresh state is an intermediate state to enter to Self refresh power down state or exit Self refresh power down state f
+		# r LPDDR4. This register controls transition from the Self refresh state. - 1 - Prohibit transition from Self refresh state - 
+		#  - Allow transition from Self refresh state
+		# PSU_DDRC_PWRCTL_STAY_IN_SELFREF                                                 0x0
+
+		# A value of 1 to this register causes system to move to Self Refresh state immediately, as long as it is not in INIT or DPD/MP
+		# M operating_mode. This is referred to as Software Entry/Exit to Self Refresh. - 1 - Software Entry to Self Refresh - 0 - Soft
+		# are Exit from Self Refresh
+		# PSU_DDRC_PWRCTL_SELFREF_SW                                                      0x0
+
+		# When this is 1, the uMCTL2 puts the SDRAM into maximum power saving mode when the transaction store is empty. This register m
+		# st be reset to '0' to bring uMCTL2 out of maximum power saving mode. Present only in designs configured to support DDR4. For 
+		# on-DDR4, this register should not be set to 1. Note that MPSM is not supported when using a DWC DDR PHY, if the PHY parameter
+		# DWC_AC_CS_USE is disabled, as the MPSM exit sequence requires the chip-select signal to toggle. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PWRCTL_MPSM_EN                                                         0x0
+
+		# Enable the assertion of dfi_dram_clk_disable whenever a clock is not required by the SDRAM. If set to 0, dfi_dram_clk_disable
+		# is never asserted. Assertion of dfi_dram_clk_disable is as follows: In DDR2/DDR3, can only be asserted in Self Refresh. In DD
+		# 4, can be asserted in following: - in Self Refresh. - in Maximum Power Saving Mode In mDDR/LPDDR2/LPDDR3, can be asserted in 
+		# ollowing: - in Self Refresh - in Power Down - in Deep Power Down - during Normal operation (Clock Stop) In LPDDR4, can be ass
+		# rted in following: - in Self Refresh Power Down - in Power Down - during Normal operation (Clock Stop)
+		# PSU_DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE                                         0x0
+
+		# When this is 1, uMCTL2 puts the SDRAM into deep power-down mode when the transaction store is empty. This register must be re
+		# et to '0' to bring uMCTL2 out of deep power-down mode. Controller performs automatic SDRAM initialization on deep power-down 
+		# xit. Present only in designs configured to support mDDR or LPDDR2 or LPDDR3. For non-mDDR/non-LPDDR2/non-LPDDR3, this registe
+		#  should not be set to 1. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PWRCTL_DEEPPOWERDOWN_EN                                                0x0
+
+		# If true then the uMCTL2 goes into power-down after a programmable number of cycles 'maximum idle clocks before power down' (P
+		# RTMG.powerdown_to_x32). This register bit may be re-programmed during the course of normal operation.
+		# PSU_DDRC_PWRCTL_POWERDOWN_EN                                                    0x0
+
+		# If true then the uMCTL2 puts the SDRAM into Self Refresh after a programmable number of cycles 'maximum idle clocks before Se
+		# f Refresh (PWRTMG.selfref_to_x32)'. This register bit may be re-programmed during the course of normal operation.
+		# PSU_DDRC_PWRCTL_SELFREF_EN                                                      0x0
+
+		# Low Power Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD070030, 0x0000007FU ,0x00000000U)  */
+    mask_write 0XFD070030 0x0000007F 0x00000000
+		# Register : PWRTMG @ 0XFD070034

+
+		# After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into Self Refresh. This must be enabled in 
+		# he PWRCTL.selfref_en. Unit: Multiples of 32 clocks. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PWRTMG_SELFREF_TO_X32                                                  0x40
+
+		# Minimum deep power-down time. For mDDR, value from the JEDEC specification is 0 as mDDR exits from deep power-down mode immed
+		# ately after PWRCTL.deeppowerdown_en is de-asserted. For LPDDR2/LPDDR3, value from the JEDEC specification is 500us. Unit: Mul
+		# iples of 4096 clocks. Present only in designs configured to support mDDR, LPDDR2 or LPDDR3. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PWRTMG_T_DPD_X4096                                                     0x84
+
+		# After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into power-down. This must be enabled in th
+		#  PWRCTL.powerdown_en. Unit: Multiples of 32 clocks FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PWRTMG_POWERDOWN_TO_X32                                                0x10
+
+		# Low Power Timing Register
+		#(OFFSET, MASK, VALUE)      (0XFD070034, 0x00FFFF1FU ,0x00408410U)  */
+    mask_write 0XFD070034 0x00FFFF1F 0x00408410
+		# Register : RFSHCTL0 @ 0XFD070050

+
+		# Threshold value in number of clock cycles before the critical refresh or page timer expires. A critical refresh is to be issu
+		# d before this threshold is reached. It is recommended that this not be changed from the default value, currently shown as 0x2
+		#  It must always be less than internally used t_rfc_nom_x32. Note that, in LPDDR2/LPDDR3/LPDDR4, internally used t_rfc_nom_x32
+		# may be equal to RFSHTMG.t_rfc_nom_x32>>2 if derating is enabled (DERATEEN.derate_enable=1). Otherwise, internally used t_rfc_
+		# om_x32 will be equal to RFSHTMG.t_rfc_nom_x32. Unit: Multiples of 32 clocks.
+		# PSU_DDRC_RFSHCTL0_REFRESH_MARGIN                                                0x2
+
+		# If the refresh timer (tRFCnom, also known as tREFI) has expired at least once, but it has not expired (RFSHCTL0.refresh_burst
+		# 1) times yet, then a speculative refresh may be performed. A speculative refresh is a refresh performed at a time when refres
+		#  would be useful, but before it is absolutely required. When the SDRAM bus is idle for a period of time determined by this RF
+		# HCTL0.refresh_to_x32 and the refresh timer has expired at least once since the last refresh, then a speculative refresh is pe
+		# formed. Speculative refreshes continues successively until there are no refreshes pending or until new reads or writes are is
+		# ued to the uMCTL2. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_RFSHCTL0_REFRESH_TO_X32                                                0x10
+
+		# The programmed value + 1 is the number of refresh timeouts that is allowed to accumulate before traffic is blocked and the re
+		# reshes are forced to execute. Closing pages to perform a refresh is a one-time penalty that must be paid for each group of re
+		# reshes. Therefore, performing refreshes in a burst reduces the per-refresh penalty of these page closings. Higher numbers for
+		# RFSHCTL.refresh_burst slightly increases utilization; lower numbers decreases the worst-case latency associated with refreshe
+		# . - 0 - single refresh - 1 - burst-of-2 refresh - 7 - burst-of-8 refresh For information on burst refresh feature refer to se
+		# tion 3.9 of DDR2 JEDEC specification - JESD79-2F.pdf. For DDR2/3, the refresh is always per-rank and not per-bank. The rank r
+		# fresh can be accumulated over 8*tREFI cycles using the burst refresh feature. In DDR4 mode, according to Fine Granularity fea
+		# ure, 8 refreshes can be postponed in 1X mode, 16 refreshes in 2X mode and 32 refreshes in 4X mode. If using PHY-initiated upd
+		# tes, care must be taken in the setting of RFSHCTL0.refresh_burst, to ensure that tRFCmax is not violated due to a PHY-initiat
+		# d update occurring shortly before a refresh burst was due. In this situation, the refresh burst will be delayed until the PHY
+		# initiated update is complete.
+		# PSU_DDRC_RFSHCTL0_REFRESH_BURST                                                 0x0
+
+		# - 1 - Per bank refresh; - 0 - All bank refresh. Per bank refresh allows traffic to flow to other banks. Per bank refresh is n
+		# t supported by all LPDDR2 devices but should be supported by all LPDDR3/LPDDR4 devices. Present only in designs configured to
+		# support LPDDR2/LPDDR3/LPDDR4
+		# PSU_DDRC_RFSHCTL0_PER_BANK_REFRESH                                              0x0
+
+		# Refresh Control Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070050, 0x00F1F1F4U ,0x00210000U)  */
+    mask_write 0XFD070050 0x00F1F1F4 0x00210000
+		# Register : RFSHCTL3 @ 0XFD070060

+
+		# Fine Granularity Refresh Mode - 000 - Fixed 1x (Normal mode) - 001 - Fixed 2x - 010 - Fixed 4x - 101 - Enable on the fly 2x (
+		# ot supported) - 110 - Enable on the fly 4x (not supported) - Everything else - reserved Note: The on-the-fly modes is not sup
+		# orted in this version of the uMCTL2. Note: This must be set up while the Controller is in reset or while the Controller is in
+		# self-refresh mode. Changing this during normal operation is not allowed. Making this a dynamic register will be supported in 
+		# uture version of the uMCTL2.
+		# PSU_DDRC_RFSHCTL3_REFRESH_MODE                                                  0x0
+
+		# Toggle this signal (either from 0 to 1 or from 1 to 0) to indicate that the refresh register(s) have been updated. The value 
+		# s automatically updated when exiting reset, so it does not need to be toggled initially.
+		# PSU_DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL                                          0x0
+
+		# When '1', disable auto-refresh generated by the uMCTL2. When auto-refresh is disabled, the SoC core must generate refreshes u
+		# ing the registers reg_ddrc_rank0_refresh, reg_ddrc_rank1_refresh, reg_ddrc_rank2_refresh and reg_ddrc_rank3_refresh. When dis
+		# auto_refresh transitions from 0 to 1, any pending refreshes are immediately scheduled by the uMCTL2. If DDR4 CRC/parity retry
+		# is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), disable auto-refresh is not supported, and this bit must be set to '0'. 
+		# his register field is changeable on the fly.
+		# PSU_DDRC_RFSHCTL3_DIS_AUTO_REFRESH                                              0x1
+
+		# Refresh Control Register 3
+		#(OFFSET, MASK, VALUE)      (0XFD070060, 0x00000073U ,0x00000001U)  */
+    mask_write 0XFD070060 0x00000073 0x00000001
+		# Register : RFSHTMG @ 0XFD070064

+
+		# tREFI: Average time interval between refreshes per rank (Specification: 7.8us for DDR2, DDR3 and DDR4. See JEDEC specificatio
+		#  for mDDR, LPDDR2, LPDDR3 and LPDDR4). For LPDDR2/LPDDR3/LPDDR4: - if using all-bank refreshes (RFSHCTL0.per_bank_refresh = 0
+		# , this register should be set to tREFIab - if using per-bank refreshes (RFSHCTL0.per_bank_refresh = 1), this register should 
+		# e set to tREFIpb For configurations with MEMC_FREQ_RATIO=2, program this to (tREFI/2), no rounding up. In DDR4 mode, tREFI va
+		# ue is different depending on the refresh mode. The user should program the appropriate value from the spec based on the value
+		# programmed in the refresh mode register. Note that RFSHTMG.t_rfc_nom_x32 * 32 must be greater than RFSHTMG.t_rfc_min, and RFS
+		# TMG.t_rfc_nom_x32 must be greater than 0x1. Unit: Multiples of 32 clocks.
+		# PSU_DDRC_RFSHTMG_T_RFC_NOM_X32                                                  0x82
+
+		# Used only when LPDDR3 memory type is connected. Should only be changed when uMCTL2 is in reset. Specifies whether to use the 
+		# REFBW parameter (required by some LPDDR3 devices which comply with earlier versions of the LPDDR3 JEDEC specification) or not
+		#  - 0 - tREFBW parameter not used - 1 - tREFBW parameter used
+		# PSU_DDRC_RFSHTMG_LPDDR3_TREFBW_EN                                               0x1
+
+		# tRFC (min): Minimum time from refresh to refresh or activate. For MEMC_FREQ_RATIO=1 configurations, t_rfc_min should be set t
+		#  RoundUp(tRFCmin/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rfc_min should be set to RoundUp(RoundUp(tRFCmin/tCK)/2). In L
+		# DDR2/LPDDR3/LPDDR4 mode: - if using all-bank refreshes, the tRFCmin value in the above equations is equal to tRFCab - if usin
+		#  per-bank refreshes, the tRFCmin value in the above equations is equal to tRFCpb In DDR4 mode, the tRFCmin value in the above
+		# equations is different depending on the refresh mode (fixed 1X,2X,4X) and the device density. The user should program the app
+		# opriate value from the spec based on the 'refresh_mode' and the device density that is used. Unit: Clocks.
+		# PSU_DDRC_RFSHTMG_T_RFC_MIN                                                      0x8b
+
+		# Refresh Timing Register
+		#(OFFSET, MASK, VALUE)      (0XFD070064, 0x0FFF83FFU ,0x0082808BU)  */
+    mask_write 0XFD070064 0x0FFF83FF 0x0082808B
+		# Register : ECCCFG0 @ 0XFD070070

+
+		# Disable ECC scrubs. Valid only when ECCCFG0.ecc_mode = 3'b100 and MEMC_USE_RMW is defined
+		# PSU_DDRC_ECCCFG0_DIS_SCRUB                                                      0x1
+
+		# ECC mode indicator - 000 - ECC disabled - 100 - ECC enabled - SEC/DED over 1 beat - all other settings are reserved for futur
+		#  use
+		# PSU_DDRC_ECCCFG0_ECC_MODE                                                       0x0
+
+		# ECC Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070070, 0x00000017U ,0x00000010U)  */
+    mask_write 0XFD070070 0x00000017 0x00000010
+		# Register : ECCCFG1 @ 0XFD070074

+
+		# Selects whether to poison 1 or 2 bits - if 0 -> 2-bit (uncorrectable) data poisoning, if 1 -> 1-bit (correctable) data poison
+		# ng, if ECCCFG1.data_poison_en=1
+		# PSU_DDRC_ECCCFG1_DATA_POISON_BIT                                                0x0
+
+		# Enable ECC data poisoning - introduces ECC errors on writes to address specified by the ECCPOISONADDR0/1 registers
+		# PSU_DDRC_ECCCFG1_DATA_POISON_EN                                                 0x0
+
+		# ECC Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070074, 0x00000003U ,0x00000000U)  */
+    mask_write 0XFD070074 0x00000003 0x00000000
+		# Register : CRCPARCTL1 @ 0XFD0700C4

+
+		# The maximum number of DFI PHY clock cycles allowed from the assertion of the dfi_rddata_en signal to the assertion of each of
+		# the corresponding bits of the dfi_rddata_valid signal. This corresponds to the DFI timing parameter tphy_rdlat. Refer to PHY 
+		# pecification for correct value. This value it only used for detecting read data timeout when DDR4 retry is enabled by CRCPARC
+		# L1.crc_parity_retry_enable=1. Maximum supported value: - 1:1 Frequency mode : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_
+		# dlat < 'd114 - 1:2 Frequency mode ANDAND DFITMG0.dfi_rddata_use_sdr == 1 : CRCPARCTL1.dfi_t_phy_rdlat < 64 - 1:2 Frequency mo
+		# e ANDAND DFITMG0.dfi_rddata_use_sdr == 0 : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_rdlat < 'd114 Unit: DFI Clocks
+		# PSU_DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT                                             0x10
+
+		# After a Parity or CRC error is flagged on dfi_alert_n signal, the software has an option to read the mode registers in the DR
+		# M before the hardware begins the retry process - 1: Wait for software to read/write the mode registers before hardware begins
+		# the retry. After software is done with its operations, it will clear the alert interrupt register bit - 0: Hardware can begin
+		# the retry right away after the dfi_alert_n pulse goes away. The value on this register is valid only when retry is enabled (P
+		# RCTRL.crc_parity_retry_enable = 1) If this register is set to 1 and if the software doesn't clear the interrupt register afte
+		#  handling the parity/CRC error, then the hardware will not begin the retry process and the system will hang. In the case of P
+		# rity/CRC error, there are two possibilities when the software doesn't reset MR5[4] to 0. - (i) If 'Persistent parity' mode re
+		# ister bit is NOT set: the commands sent during retry and normal operation are executed without parity checking. The value in 
+		# he Parity error log register MPR Page 1 is valid. - (ii) If 'Persistent parity' mode register bit is SET: Parity checking is 
+		# one for commands sent during retry and normal operation. If multiple errors occur before MR5[4] is cleared, the error log in 
+		# PR Page 1 should be treated as 'Don't care'.
+		# PSU_DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW                                           0x1
+
+		# - 1: Enable command retry mechanism in case of C/A Parity or CRC error - 0: Disable command retry mechanism when C/A Parity o
+		#  CRC features are enabled. Note that retry functionality is not supported if burst chop is enabled (MSTR.burstchop = 1) and/o
+		#  disable auto-refresh is enabled (RFSHCTL3.dis_auto_refresh = 1)
+		# PSU_DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE                                     0x0
+
+		# CRC Calculation setting register - 1: CRC includes DM signal - 0: CRC not includes DM signal Present only in designs configur
+		# d to support DDR4.
+		# PSU_DDRC_CRCPARCTL1_CRC_INC_DM                                                  0x0
+
+		# CRC enable Register - 1: Enable generation of CRC - 0: Disable generation of CRC The setting of this register should match th
+		#  CRC mode register setting in the DRAM.
+		# PSU_DDRC_CRCPARCTL1_CRC_ENABLE                                                  0x0
+
+		# C/A Parity enable register - 1: Enable generation of C/A parity and detection of C/A parity error - 0: Disable generation of 
+		# /A parity and disable detection of C/A parity error If RCD's parity error detection or SDRAM's parity detection is enabled, t
+		# is register should be 1.
+		# PSU_DDRC_CRCPARCTL1_PARITY_ENABLE                                               0x0
+
+		# CRC Parity Control Register1
+		#(OFFSET, MASK, VALUE)      (0XFD0700C4, 0x3F000391U ,0x10000200U)  */
+    mask_write 0XFD0700C4 0x3F000391 0x10000200
+		# Register : CRCPARCTL2 @ 0XFD0700C8

+
+		# Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a parity error occurs. Recommended values
+		#  - tPAR_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tPAR_ALERT_PW.MAX/2 and round up to next inte
+		# er value. Values of 0, 1 and 2 are illegal. This value must be greater than CRCPARCTL2.t_crc_alert_pw_max.
+		# PSU_DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX                                          0x40
+
+		# Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a CRC error occurs. Recommended values: -
+		# tCRC_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tCRC_ALERT_PW.MAX/2 and round up to next integer
+		# value. Values of 0, 1 and 2 are illegal. This value must be less than CRCPARCTL2.t_par_alert_pw_max.
+		# PSU_DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX                                          0x5
+
+		# Indicates the maximum duration in number of DRAM clock cycles for which a command should be held in the Command Retry FIFO be
+		# ore it is popped out. Every location in the Command Retry FIFO has an associated down counting timer that will use this regis
+		# er as the start value. The down counting starts when a command is loaded into the FIFO. The timer counts down every 4 DRAM cy
+		# les. When the counter reaches zero, the entry is popped from the FIFO. All the counters are frozen, if a C/A Parity or CRC er
+		# or occurs before the counter reaches zero. The counter is reset to 0, after all the commands in the FIFO are retried. Recomme
+		# ded(minimum) values: - Only C/A Parity is enabled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + tPAR_ALERT_ON
+		# max + tPAR_UNKNOWN + PHY Alert Latency(DRAM CLK) + board delay) / 4) + 2 - Both C/A Parity and CRC is enabled/ Only CRC is en
+		# bled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + WL + 5(BL10)+ tCRC_ALERT.max + PHY Alert Latency(DRAM CLK)
+		# + board delay) / 4) + 2 Note 1: All value (e.g. tPAR_ALERT_ON) should be in terms of DRAM Clock and round up Note 2: Board de
+		# ay(Command/Alert_n) should be considered. Note 3: Use the worst case(longer) value for PHY Latencies/Board delay Note 4: The 
+		# ecommended values are minimum value to be set. For mode detail, See 'Calculation of FIFO Depth' section. Max value can be set
+		# to this register is defined below: - MEMC_BURST_LENGTH == 16 Full bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-
+		#  Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Half bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_D
+		# PTH-4 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-6 Quarter bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CM
+		# _FIFO_DEPTH-8 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-12 - MEMC_BURST_LENGTH != 16 Full bus Mode (C
+		# C=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-1 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mo
+		# e (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Quarte
+		#  bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-4 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEP
+		# H-6 Values of 0, 1 and 2 are illegal.
+		# PSU_DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4                                0x1f
+
+		# CRC Parity Control Register2
+		#(OFFSET, MASK, VALUE)      (0XFD0700C8, 0x01FF1F3FU ,0x0040051FU)  */
+    mask_write 0XFD0700C8 0x01FF1F3F 0x0040051F
+		# Register : INIT0 @ 0XFD0700D0

+
+		# If lower bit is enabled the SDRAM initialization routine is skipped. The upper bit decides what state the controller starts u
+		#  in when reset is removed - 00 - SDRAM Intialization routine is run after power-up - 01 - SDRAM Intialization routine is skip
+		# ed after power-up. Controller starts up in Normal Mode - 11 - SDRAM Intialization routine is skipped after power-up. Controll
+		# r starts up in Self-refresh Mode - 10 - SDRAM Intialization routine is run after power-up. Note: The only 2'b00 is supported 
+		# or LPDDR4 in this version of the uMCTL2.
+		# PSU_DDRC_INIT0_SKIP_DRAM_INIT                                                   0x0
+
+		# Cycles to wait after driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clocks. DDR2 typically requires 
+		#  400 ns delay, requiring this value to be programmed to 2 at all clock speeds. LPDDR2/LPDDR3 typically requires this to be pr
+		# grammed for a delay of 200 us. LPDDR4 typically requires this to be programmed for a delay of 2 us. For configurations with M
+		# MC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it up to next integer value.
+		# PSU_DDRC_INIT0_POST_CKE_X1024                                                   0x2
+
+		# Cycles to wait after reset before driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clock cycles. DDR2 
+		# pecifications typically require this to be programmed for a delay of >= 200 us. LPDDR2/LPDDR3: tINIT1 of 100 ns (min) LPDDR4:
+		# tINIT3 of 2 ms (min) For configurations with MEMC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it u
+		#  to next integer value.
+		# PSU_DDRC_INIT0_PRE_CKE_X1024                                                    0x106
+
+		# SDRAM Initialization Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0700D0, 0xC3FF0FFFU ,0x00020106U)  */
+    mask_write 0XFD0700D0 0xC3FF0FFF 0x00020106
+		# Register : INIT1 @ 0XFD0700D4

+
+		# Number of cycles to assert SDRAM reset signal during init sequence. This is only present for designs supporting DDR3, DDR4 or
+		# LPDDR4 devices. For use with a DDR PHY, this should be set to a minimum of 1
+		# PSU_DDRC_INIT1_DRAM_RSTN_X1024                                                  0x2
+
+		# Cycles to wait after completing the SDRAM initialization sequence before starting the dynamic scheduler. Unit: Counts of a gl
+		# bal timer that pulses every 32 clock cycles. There is no known specific requirement for this; it may be set to zero.
+		# PSU_DDRC_INIT1_FINAL_WAIT_X32                                                   0x0
+
+		# Wait period before driving the OCD complete command to SDRAM. Unit: Counts of a global timer that pulses every 32 clock cycle
+		# . There is no known specific requirement for this; it may be set to zero.
+		# PSU_DDRC_INIT1_PRE_OCD_X32                                                      0x0
+
+		# SDRAM Initialization Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD0700D4, 0x01FF7F0FU ,0x00020000U)  */
+    mask_write 0XFD0700D4 0x01FF7F0F 0x00020000
+		# Register : INIT2 @ 0XFD0700D8

+
+		# Idle time after the reset command, tINIT4. Present only in designs configured to support LPDDR2. Unit: 32 clock cycles.
+		# PSU_DDRC_INIT2_IDLE_AFTER_RESET_X32                                             0x23
+
+		# Time to wait after the first CKE high, tINIT2. Present only in designs configured to support LPDDR2/LPDDR3. Unit: 1 clock cyc
+		# e. LPDDR2/LPDDR3 typically requires 5 x tCK delay.
+		# PSU_DDRC_INIT2_MIN_STABLE_CLOCK_X1                                              0x5
+
+		# SDRAM Initialization Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD0700D8, 0x0000FF0FU ,0x00002305U)  */
+    mask_write 0XFD0700D8 0x0000FF0F 0x00002305
+		# Register : INIT3 @ 0XFD0700DC

+
+		# DDR2: Value to write to MR register. Bit 8 is for DLL and the setting here is ignored. The uMCTL2 sets this bit appropriately
+		#  DDR3/DDR4: Value loaded into MR0 register. mDDR: Value to write to MR register. LPDDR2/LPDDR3/LPDDR4 - Value to write to MR1
+		# register
+		# PSU_DDRC_INIT3_MR                                                               0x930
+
+		# DDR2: Value to write to EMR register. Bits 9:7 are for OCD and the setting in this register is ignored. The uMCTL2 sets those
+		# bits appropriately. DDR3/DDR4: Value to write to MR1 register Set bit 7 to 0. If PHY-evaluation mode training is enabled, thi
+		#  bit is set appropriately by the uMCTL2 during write leveling. mDDR: Value to write to EMR register. LPDDR2/LPDDR3/LPDDR4 - V
+		# lue to write to MR2 register
+		# PSU_DDRC_INIT3_EMR                                                              0x301
+
+		# SDRAM Initialization Register 3
+		#(OFFSET, MASK, VALUE)      (0XFD0700DC, 0xFFFFFFFFU ,0x09300301U)  */
+    mask_write 0XFD0700DC 0xFFFFFFFF 0x09300301
+		# Register : INIT4 @ 0XFD0700E0

+
+		# DDR2: Value to write to EMR2 register. DDR3/DDR4: Value to write to MR2 register LPDDR2/LPDDR3/LPDDR4: Value to write to MR3 
+		# egister mDDR: Unused
+		# PSU_DDRC_INIT4_EMR2                                                             0x20
+
+		# DDR2: Value to write to EMR3 register. DDR3/DDR4: Value to write to MR3 register mDDR/LPDDR2/LPDDR3: Unused LPDDR4: Value to 
+		# rite to MR13 register
+		# PSU_DDRC_INIT4_EMR3                                                             0x200
+
+		# SDRAM Initialization Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD0700E0, 0xFFFFFFFFU ,0x00200200U)  */
+    mask_write 0XFD0700E0 0xFFFFFFFF 0x00200200
+		# Register : INIT5 @ 0XFD0700E4

+
+		# ZQ initial calibration, tZQINIT. Present only in designs configured to support DDR3 or DDR4 or LPDDR2/LPDDR3. Unit: 32 clock 
+		# ycles. DDR3 typically requires 512 clocks. DDR4 requires 1024 clocks. LPDDR2/LPDDR3 requires 1 us.
+		# PSU_DDRC_INIT5_DEV_ZQINIT_X32                                                   0x21
+
+		# Maximum duration of the auto initialization, tINIT5. Present only in designs configured to support LPDDR2/LPDDR3. LPDDR2/LPDD
+		# 3 typically requires 10 us.
+		# PSU_DDRC_INIT5_MAX_AUTO_INIT_X1024                                              0x4
+
+		# SDRAM Initialization Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD0700E4, 0x00FF03FFU ,0x00210004U)  */
+    mask_write 0XFD0700E4 0x00FF03FF 0x00210004
+		# Register : INIT6 @ 0XFD0700E8

+
+		# DDR4- Value to be loaded into SDRAM MR4 registers. Used in DDR4 designs only.
+		# PSU_DDRC_INIT6_MR4                                                              0x0
+
+		# DDR4- Value to be loaded into SDRAM MR5 registers. Used in DDR4 designs only.
+		# PSU_DDRC_INIT6_MR5                                                              0x6c0
+
+		# SDRAM Initialization Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD0700E8, 0xFFFFFFFFU ,0x000006C0U)  */
+    mask_write 0XFD0700E8 0xFFFFFFFF 0x000006C0
+		# Register : INIT7 @ 0XFD0700EC

+
+		# DDR4- Value to be loaded into SDRAM MR6 registers. Used in DDR4 designs only.
+		# PSU_DDRC_INIT7_MR6                                                              0x819
+
+		# SDRAM Initialization Register 7
+		#(OFFSET, MASK, VALUE)      (0XFD0700EC, 0xFFFF0000U ,0x08190000U)  */
+    mask_write 0XFD0700EC 0xFFFF0000 0x08190000
+		# Register : DIMMCTL @ 0XFD0700F0

+
+		# Disabling Address Mirroring for BG bits. When this is set to 1, BG0 and BG1 are NOT swapped even if Address Mirroring is enab
+		# ed. This will be required for DDR4 DIMMs with x16 devices. - 1 - BG0 and BG1 are NOT swapped. - 0 - BG0 and BG1 are swapped i
+		#  address mirroring is enabled.
+		# PSU_DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING                                          0x0
+
+		# Enable for BG1 bit of MRS command. BG1 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		#  be programmed to 0 during MRS. In case where DRAMs which do not have BG1 are attached and both the CA parity and the Output 
+		# nversion are enabled, this must be set to 0, so that the calculation of CA parity will not include BG1 bit. Note: This has no
+		# effect on the address of any other memory accesses, or of software-driven mode register accesses. If address mirroring is ena
+		# led, this is applied to BG1 of even ranks and BG0 of odd ranks. - 1 - Enabled - 0 - Disabled
+		# PSU_DDRC_DIMMCTL_MRS_BG1_EN                                                     0x1
+
+		# Enable for A17 bit of MRS command. A17 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		#  be programmed to 0 during MRS. In case where DRAMs which do not have A17 are attached and the Output Inversion are enabled, 
+		# his must be set to 0, so that the calculation of CA parity will not include A17 bit. Note: This has no effect on the address 
+		# f any other memory accesses, or of software-driven mode register accesses. - 1 - Enabled - 0 - Disabled
+		# PSU_DDRC_DIMMCTL_MRS_A17_EN                                                     0x0
+
+		# Output Inversion Enable (for DDR4 RDIMM implementations only). DDR4 RDIMM implements the Output Inversion feature by default,
+		# which means that the following address, bank address and bank group bits of B-side DRAMs are inverted: A3-A9, A11, A13, A17, 
+		# A0-BA1, BG0-BG1. Setting this bit ensures that, for mode register accesses generated by the uMCTL2 during the automatic initi
+		# lization routine and enabling of a particular DDR4 feature, separate A-side and B-side mode register accesses are generated. 
+		# or B-side mode register accesses, these bits are inverted within the uMCTL2 to compensate for this RDIMM inversion. Note: Thi
+		#  has no effect on the address of any other memory accesses, or of software-driven mode register accesses. - 1 - Implement out
+		# ut inversion for B-side DRAMs. - 0 - Do not implement output inversion for B-side DRAMs.
+		# PSU_DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN                                             0x0
+
+		# Address Mirroring Enable (for multi-rank UDIMM implementations and multi-rank DDR4 RDIMM implementations). Some UDIMMs and DD
+		# 4 RDIMMs implement address mirroring for odd ranks, which means that the following address, bank address and bank group bits 
+		# re swapped: (A3, A4), (A5, A6), (A7, A8), (BA0, BA1) and also (A11, A13), (BG0, BG1) for the DDR4. Setting this bit ensures t
+		# at, for mode register accesses during the automatic initialization routine, these bits are swapped within the uMCTL2 to compe
+		# sate for this UDIMM/RDIMM swapping. In addition to the automatic initialization routine, in case of DDR4 UDIMM/RDIMM, they ar
+		#  swapped during the automatic MRS access to enable/disable of a particular DDR4 feature. Note: This has no effect on the addr
+		# ss of any other memory accesses, or of software-driven mode register accesses. This is not supported for mDDR, LPDDR2, LPDDR3
+		# or LPDDR4 SDRAMs. Note: In case of x16 DDR4 DIMMs, BG1 output of MRS for the odd ranks is same as BG0 because BG1 is invalid,
+		# hence dimm_dis_bg_mirroring register must be set to 1. - 1 - For odd ranks, implement address mirroring for MRS commands to d
+		# ring initialization and for any automatic DDR4 MRS commands (to be used if UDIMM/RDIMM implements address mirroring) - 0 - Do
+		# not implement address mirroring
+		# PSU_DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN                                              0x0
+
+		# Staggering enable for multi-rank accesses (for multi-rank UDIMM and RDIMM implementations only). This is not supported for mD
+		# R, LPDDR2, LPDDR3 or LPDDR4 SDRAMs. Note: Even if this bit is set it does not take care of software driven MR commands (via M
+		# CTRL0/MRCTRL1), where software is responsible to send them to seperate ranks as appropriate. - 1 - (DDR4) Send MRS commands t
+		#  each ranks seperately - 1 - (non-DDR4) Send all commands to even and odd ranks seperately - 0 - Do not stagger accesses
+		# PSU_DDRC_DIMMCTL_DIMM_STAGGER_CS_EN                                             0x0
+
+		# DIMM Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0700F0, 0x0000003FU ,0x00000010U)  */
+    mask_write 0XFD0700F0 0x0000003F 0x00000010
+		# Register : RANKCTL @ 0XFD0700F4

+
+		# Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		# e writes to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should c
+		# nsider both PHY requirement and ODT requirement. - PHY requirement: tphy_wrcsgap + 1 (see PHY databook for value of tphy_wrcs
+		# ap) If CRC feature is enabled, should be increased by 1. If write preamble is set to 2tCK(DDR4/LPDDR4 only), should be increa
+		# ed by 1. If write postamble is set to 1.5tCK(LPDDR4 only), should be increased by 1. - ODT requirement: The value programmed 
+		# n this register takes care of the ODT switch off timing requirement when switching ranks during writes. For LPDDR4, the requi
+		# ement is ODTLoff - ODTLon - BL/2 + 1 For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY requirement
+		# or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and round it u
+		#  to the next integer.
+		# PSU_DDRC_RANKCTL_DIFF_RANK_WR_GAP                                               0x6
+
+		# Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		# e reads to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should co
+		# sider both PHY requirement and ODT requirement. - PHY requirement: tphy_rdcsgap + 1 (see PHY databook for value of tphy_rdcsg
+		# p) If read preamble is set to 2tCK(DDR4/LPDDR4 only), should be increased by 1. If read postamble is set to 1.5tCK(LPDDR4 onl
+		# ), should be increased by 1. - ODT requirement: The value programmed in this register takes care of the ODT switch off timing
+		# requirement when switching ranks during reads. For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY r
+		# quirement or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and 
+		# ound it up to the next integer.
+		# PSU_DDRC_RANKCTL_DIFF_RANK_RD_GAP                                               0x6
+
+		# Only present for multi-rank configurations. Background: Reads to the same rank can be performed back-to-back. Reads to differ
+		# nt ranks require additional gap dictated by the register RANKCTL.diff_rank_rd_gap. This is to avoid possible data bus content
+		# on as well as to give PHY enough time to switch the delay when changing ranks. The uMCTL2 arbitrates for bus access on a cycl
+		# -by-cycle basis; therefore after a read is scheduled, there are few clock cycles (determined by the value on RANKCTL.diff_ran
+		# _rd_gap register) in which only reads from the same rank are eligible to be scheduled. This prevents reads from other ranks f
+		# om having fair access to the data bus. This parameter represents the maximum number of reads that can be scheduled consecutiv
+		# ly to the same rank. After this number is reached, a delay equal to RANKCTL.diff_rank_rd_gap is inserted by the scheduler to 
+		# llow all ranks a fair opportunity to be scheduled. Higher numbers increase bandwidth utilization, lower numbers increase fair
+		# ess. This feature can be DISABLED by setting this register to 0. When set to 0, the Controller will stay on the same rank as 
+		# ong as commands are available for it. Minimum programmable value is 0 (feature disabled) and maximum programmable value is 0x
+		# . FOR PERFORMANCE ONLY.
+		# PSU_DDRC_RANKCTL_MAX_RANK_RD                                                    0xf
+
+		# Rank Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0700F4, 0x00000FFFU ,0x0000066FU)  */
+    mask_write 0XFD0700F4 0x00000FFF 0x0000066F
+		# Register : DRAMTMG0 @ 0XFD070100

+
+		# Minimum time between write and precharge to same bank. Unit: Clocks Specifications: WL + BL/2 + tWR = approximately 8 cycles 
+		#  15 ns = 14 clocks @400MHz and less for lower frequencies where: - WL = write latency - BL = burst length. This must match th
+		#  value programmed in the BL bit of the mode register to the SDRAM. BST (burst terminate) is not supported at present. - tWR =
+		# Write recovery time. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 for this 
+		# arameter. For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For configurations
+		# with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer value.
+		# PSU_DDRC_DRAMTMG0_WR2PRE                                                        0x11
+
+		# tFAW Valid only when 8 or more banks(or banks x bank groups) are present. In 8-bank design, at most 4 banks must be activated
+		# in a rolling window of tFAW cycles. For configurations with MEMC_FREQ_RATIO=2, program this to (tFAW/2) and round up to next 
+		# nteger value. In a 4-bank design, set this register to 0x1 independent of the MEMC_FREQ_RATIO configuration. Unit: Clocks
+		# PSU_DDRC_DRAMTMG0_T_FAW                                                         0xc
+
+		# tRAS(max): Maximum time between activate and precharge to same bank. This is the maximum time that a page can be kept open Mi
+		# imum value of this register is 1. Zero is invalid. For configurations with MEMC_FREQ_RATIO=2, program this to (tRAS(max)-1)/2
+		#  No rounding up. Unit: Multiples of 1024 clocks.
+		# PSU_DDRC_DRAMTMG0_T_RAS_MAX                                                     0x24
+
+		# tRAS(min): Minimum time between activate and precharge to the same bank. For configurations with MEMC_FREQ_RATIO=2, 1T mode, 
+		# rogram this to tRAS(min)/2. No rounding up. For configurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, program this t
+		#  (tRAS(min)/2) and round it up to the next integer value. Unit: Clocks
+		# PSU_DDRC_DRAMTMG0_T_RAS_MIN                                                     0x12
+
+		# SDRAM Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070100, 0x7F3F7F3FU ,0x110C2412U)  */
+    mask_write 0XFD070100 0x7F3F7F3F 0x110C2412
+		# Register : DRAMTMG1 @ 0XFD070104

+
+		# tXP: Minimum time after power-down exit to any operation. For DDR3, this should be programmed to tXPDLL if slow powerdown exi
+		#  is selected in MR0[12]. If C/A parity for DDR4 is used, set to (tXP+PL) instead. For configurations with MEMC_FREQ_RATIO=2, 
+		# rogram this to (tXP/2) and round it up to the next integer value. Units: Clocks
+		# PSU_DDRC_DRAMTMG1_T_XP                                                          0x4
+
+		# tRTP: Minimum time from read to precharge of same bank. - DDR2: tAL + BL/2 + max(tRTP, 2) - 2 - DDR3: tAL + max (tRTP, 4) - D
+		# R4: Max of following two equations: tAL + max (tRTP, 4) or, RL + BL/2 - tRP. - mDDR: BL/2 - LPDDR2: Depends on if it's LPDDR2
+		# S2 or LPDDR2-S4: LPDDR2-S2: BL/2 + tRTP - 1. LPDDR2-S4: BL/2 + max(tRTP,2) - 2. - LPDDR3: BL/2 + max(tRTP,4) - 4 - LPDDR4: BL
+		# 2 + max(tRTP,8) - 8 For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For conf
+		# gurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer val
+		# e. Unit: Clocks.
+		# PSU_DDRC_DRAMTMG1_RD2PRE                                                        0x4
+
+		# tRC: Minimum time between activates to same bank. For configurations with MEMC_FREQ_RATIO=2, program this to (tRC/2) and roun
+		#  up to next integer value. Unit: Clocks.
+		# PSU_DDRC_DRAMTMG1_T_RC                                                          0x19
+
+		# SDRAM Timing Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070104, 0x001F1F7FU ,0x00040419U)  */
+    mask_write 0XFD070104 0x001F1F7F 0x00040419
+		# Register : DRAMTMG2 @ 0XFD070108

+
+		# Set to WL Time from write command to write data on SDRAM interface. This must be set to WL. For mDDR, it should normally be s
+		# t to 1. Note that, depending on the PHY, if using RDIMM, it may be necessary to use a value of WL + 1 to compensate for the e
+		# tra cycle of latency through the RDIMM For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above
+		# equation by 2, and round it up to next integer. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAININ
+		#  is set), as the DFI read and write latencies defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
+		# PSU_DDRC_DRAMTMG2_WRITE_LATENCY                                                 0x7
+
+		# Set to RL Time from read command to read data on SDRAM interface. This must be set to RL. Note that, depending on the PHY, if
+		# using RDIMM, it mat be necessary to use a value of RL + 1 to compensate for the extra cycle of latency through the RDIMM For 
+		# onfigurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next inte
+		# er. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAINING is set), as the DFI read and write latenci
+		# s defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
+		# PSU_DDRC_DRAMTMG2_READ_LATENCY                                                  0x8
+
+		# DDR2/3/mDDR: RL + BL/2 + 2 - WL DDR4: RL + BL/2 + 1 + WR_PREAMBLE - WL LPDDR2/LPDDR3: RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL 
+		# PDDR4(DQ ODT is Disabled): RL + BL/2 + RU(tDQSCKmax/tCK) + WR_PREAMBLE + RD_POSTAMBLE - WL LPDDR4(DQ ODT is Enabled) : RL + B
+		# /2 + RU(tDQSCKmax/tCK) + RD_POSTAMBLE - ODTLon - RU(tODTon(min)/tCK) Minimum time from read command to write command. Include
+		# time for bus turnaround and all per-bank, per-rank, and global constraints. Unit: Clocks. Where: - WL = write latency - BL = 
+		# urst length. This must match the value programmed in the BL bit of the mode register to the SDRAM - RL = read latency = CAS l
+		# tency - WR_PREAMBLE = write preamble. This is unique to DDR4 and LPDDR4. - RD_POSTAMBLE = read postamble. This is unique to L
+		# DDR4. For LPDDR2/LPDDR3/LPDDR4, if derating is enabled (DERATEEN.derate_enable=1), derated tDQSCKmax should be used. For conf
+		# gurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
+		# PSU_DDRC_DRAMTMG2_RD2WR                                                         0x6
+
+		# DDR4: CWL + PL + BL/2 + tWTR_L Others: CWL + BL/2 + tWTR In DDR4, minimum time from write command to read command for same ba
+		# k group. In others, minimum time from write command to read command. Includes time for bus turnaround, recovery times, and al
+		#  per-bank, per-rank, and global constraints. Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burs
+		#  length. This must match the value programmed in the BL bit of the mode register to the SDRAM - tWTR_L = internal write to re
+		# d command delay for same bank group. This comes directly from the SDRAM specification. - tWTR = internal write to read comman
+		#  delay. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 operation. For configu
+		# ations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
+		# PSU_DDRC_DRAMTMG2_WR2RD                                                         0xe
+
+		# SDRAM Timing Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD070108, 0x3F3F3F3FU ,0x0708060EU)  */
+    mask_write 0XFD070108 0x3F3F3F3F 0x0708060E
+		# Register : DRAMTMG3 @ 0XFD07010C

+
+		# Time to wait after a mode register write or read (MRW or MRR). Present only in designs configured to support LPDDR2, LPDDR3 o
+		#  LPDDR4. LPDDR2 typically requires value of 5. LPDDR3 typically requires value of 10. LPDDR4: Set this to the larger of tMRW 
+		# nd tMRWCKEL. For LPDDR2, this register is used for the time from a MRW/MRR to all other commands. For LDPDR3, this register i
+		#  used for the time from a MRW/MRR to a MRW/MRR.
+		# PSU_DDRC_DRAMTMG3_T_MRW                                                         0x5
+
+		# tMRD: Cycles to wait after a mode register write or read. Depending on the connected SDRAM, tMRD represents: DDR2/mDDR: Time 
+		# rom MRS to any command DDR3/4: Time from MRS to MRS command LPDDR2: not used LPDDR3/4: Time from MRS to non-MRS command For c
+		# nfigurations with MEMC_FREQ_RATIO=2, program this to (tMRD/2) and round it up to the next integer value. If C/A parity for DD
+		# 4 is used, set to tMRD_PAR(tMOD+PL) instead.
+		# PSU_DDRC_DRAMTMG3_T_MRD                                                         0x4
+
+		# tMOD: Parameter used only in DDR3 and DDR4. Cycles between load mode command and following non-load mode command. If C/A pari
+		# y for DDR4 is used, set to tMOD_PAR(tMOD+PL) instead. Set to tMOD if MEMC_FREQ_RATIO=1, or tMOD/2 (rounded up to next integer
+		#  if MEMC_FREQ_RATIO=2. Note that if using RDIMM, depending on the PHY, it may be necessary to use a value of tMOD + 1 or (tMO
+		#  + 1)/2 to compensate for the extra cycle of latency applied to mode register writes by the RDIMM chip.
+		# PSU_DDRC_DRAMTMG3_T_MOD                                                         0xc
+
+		# SDRAM Timing Register 3
+		#(OFFSET, MASK, VALUE)      (0XFD07010C, 0x3FF3F3FFU ,0x0050400CU)  */
+    mask_write 0XFD07010C 0x3FF3F3FF 0x0050400C
+		# Register : DRAMTMG4 @ 0XFD070110

+
+		# tRCD - tAL: Minimum time from activate to read or write command to same bank. For configurations with MEMC_FREQ_RATIO=2, prog
+		# am this to ((tRCD - tAL)/2) and round it up to the next integer value. Minimum value allowed for this register is 1, which im
+		# lies minimum (tRCD - tAL) value to be 2 in configurations with MEMC_FREQ_RATIO=2. Unit: Clocks.
+		# PSU_DDRC_DRAMTMG4_T_RCD                                                         0x8
+
+		# DDR4: tCCD_L: This is the minimum time between two reads or two writes for same bank group. Others: tCCD: This is the minimum
+		# time between two reads or two writes. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_L/2 or tCCD/2) and rou
+		# d it up to the next integer value. Unit: clocks.
+		# PSU_DDRC_DRAMTMG4_T_CCD                                                         0x3
+
+		# DDR4: tRRD_L: Minimum time between activates from bank 'a' to bank 'b' for same bank group. Others: tRRD: Minimum time betwee
+		#  activates from bank 'a' to bank 'b'For configurations with MEMC_FREQ_RATIO=2, program this to (tRRD_L/2 or tRRD/2) and round
+		# it up to the next integer value. Unit: Clocks.
+		# PSU_DDRC_DRAMTMG4_T_RRD                                                         0x3
+
+		# tRP: Minimum time from precharge to activate of same bank. For MEMC_FREQ_RATIO=1 configurations, t_rp should be set to RoundU
+		# (tRP/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rp should be set to RoundDown(RoundUp(tRP/tCK)/2) + 1. For MEMC_FREQ_RATIO
+		# 2 configurations in LPDDR4, t_rp should be set to RoundUp(RoundUp(tRP/tCK)/2). Unit: Clocks.
+		# PSU_DDRC_DRAMTMG4_T_RP                                                          0x9
+
+		# SDRAM Timing Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD070110, 0x1F0F0F1FU ,0x08030309U)  */
+    mask_write 0XFD070110 0x1F0F0F1F 0x08030309
+		# Register : DRAMTMG5 @ 0XFD070114

+
+		# This is the time before Self Refresh Exit that CK is maintained as a valid clock before issuing SRX. Specifies the clock stab
+		# e time before SRX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEH - DDR2: 1 - DDR3: tCKSRX - DDR4:
+		# tCKSRX For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next in
+		# eger.
+		# PSU_DDRC_DRAMTMG5_T_CKSRX                                                       0x6
+
+		# This is the time after Self Refresh Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay afte
+		#  SRE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL - DDR2: 1 - DDR3: max (10 ns, 5 tCK) - DDR4: 
+		# ax (10 ns, 5 tCK) For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up
+		# to next integer.
+		# PSU_DDRC_DRAMTMG5_T_CKSRE                                                       0x6
+
+		# Minimum CKE low width for Self refresh or Self refresh power down entry to exit timing in memory clock cycles. Recommended se
+		# tings: - mDDR: tRFC - LPDDR2: tCKESR - LPDDR3: tCKESR - LPDDR4: max(tCKELPD, tSR) - DDR2: tCKE - DDR3: tCKE + 1 - DDR4: tCKE 
+		#  1 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next intege
+		# .
+		# PSU_DDRC_DRAMTMG5_T_CKESR                                                       0x4
+
+		# Minimum number of cycles of CKE HIGH/LOW during power-down and self refresh. - LPDDR2/LPDDR3 mode: Set this to the larger of 
+		# CKE or tCKESR - LPDDR4 mode: Set this to the larger of tCKE, tCKELPD or tSR. - Non-LPDDR2/non-LPDDR3/non-LPDDR4 designs: Set 
+		# his to tCKE value. For configurations with MEMC_FREQ_RATIO=2, program this to (value described above)/2 and round it up to th
+		#  next integer value. Unit: Clocks.
+		# PSU_DDRC_DRAMTMG5_T_CKE                                                         0x3
+
+		# SDRAM Timing Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD070114, 0x0F0F3F1FU ,0x06060403U)  */
+    mask_write 0XFD070114 0x0F0F3F1F 0x06060403
+		# Register : DRAMTMG6 @ 0XFD070118

+
+		# This is the time after Deep Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after 
+		# PDE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, program this to recom
+		# ended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3
+		# devices.
+		# PSU_DDRC_DRAMTMG6_T_CKDPDE                                                      0x1
+
+		# This is the time before Deep Power Down Exit that CK is maintained as a valid clock before issuing DPDX. Specifies the clock 
+		# table time before DPDX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, pr
+		# gram this to recommended value divided by two and round it up to next integer. This is only present for designs supporting mD
+		# R or LPDDR2 devices.
+		# PSU_DDRC_DRAMTMG6_T_CKDPDX                                                      0x1
+
+		# This is the time before Clock Stop Exit that CK is maintained as a valid clock before issuing Clock Stop Exit. Specifies the 
+		# lock stable time before next command after Clock Stop Exit. Recommended settings: - mDDR: 1 - LPDDR2: tXP + 2 - LPDDR3: tXP +
+		# 2 - LPDDR4: tXP + 2 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it 
+		# p to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_DRAMTMG6_T_CKCSX                                                       0x4
+
+		# SDRAM Timing Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD070118, 0x0F0F000FU ,0x01010004U)  */
+    mask_write 0XFD070118 0x0F0F000F 0x01010004
+		# Register : DRAMTMG7 @ 0XFD07011C

+
+		# This is the time after Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after PDE. 
+		# ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t
+		# is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L
+		# DDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_DRAMTMG7_T_CKPDE                                                       0x1
+
+		# This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable
+		# time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO=
+		# , program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti
+		# g mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_DRAMTMG7_T_CKPDX                                                       0x1
+
+		# SDRAM Timing Register 7
+		#(OFFSET, MASK, VALUE)      (0XFD07011C, 0x00000F0FU ,0x00000101U)  */
+    mask_write 0XFD07011C 0x00000F0F 0x00000101
+		# Register : DRAMTMG8 @ 0XFD070120

+
+		# tXS_FAST: Exit Self Refresh to ZQCL, ZQCS and MRS (only CL, WR, RTP and Geardown mode). For configurations with MEMC_FREQ_RAT
+		# O=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Thi
+		#  is applicable to only ZQCL/ZQCS commands. Note: Ensure this is less than or equal to t_xs_x32.
+		# PSU_DDRC_DRAMTMG8_T_XS_FAST_X32                                                 0x4
+
+		# tXS_ABORT: Exit Self Refresh to commands not requiring a locked DLL in Self Refresh Abort. For configurations with MEMC_FREQ_
+		# ATIO=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: 
+		# nsure this is less than or equal to t_xs_x32.
+		# PSU_DDRC_DRAMTMG8_T_XS_ABORT_X32                                                0x4
+
+		# tXSDLL: Exit Self Refresh to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the 
+		# bove value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and 
+		# DR4 SDRAMs.
+		# PSU_DDRC_DRAMTMG8_T_XS_DLL_X32                                                  0xd
+
+		# tXS: Exit Self Refresh to commands not requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the
+		# above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and
+		# DDR4 SDRAMs.
+		# PSU_DDRC_DRAMTMG8_T_XS_X32                                                      0x6
+
+		# SDRAM Timing Register 8
+		#(OFFSET, MASK, VALUE)      (0XFD070120, 0x7F7F7F7FU ,0x04040D06U)  */
+    mask_write 0XFD070120 0x7F7F7F7F 0x04040D06
+		# Register : DRAMTMG9 @ 0XFD070124

+
+		# DDR4 Write preamble mode - 0: 1tCK preamble - 1: 2tCK preamble Present only with MEMC_FREQ_RATIO=2
+		# PSU_DDRC_DRAMTMG9_DDR4_WR_PREAMBLE                                              0x0
+
+		# tCCD_S: This is the minimum time between two reads or two writes for different bank group. For bank switching (from bank 'a' 
+		# o bank 'b'), the minimum time is this value + 1. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_S/2) and ro
+		# nd it up to the next integer value. Present only in designs configured to support DDR4. Unit: clocks.
+		# PSU_DDRC_DRAMTMG9_T_CCD_S                                                       0x2
+
+		# tRRD_S: Minimum time between activates from bank 'a' to bank 'b' for different bank group. For configurations with MEMC_FREQ_
+		# ATIO=2, program this to (tRRD_S/2) and round it up to the next integer value. Present only in designs configured to support D
+		# R4. Unit: Clocks.
+		# PSU_DDRC_DRAMTMG9_T_RRD_S                                                       0x2
+
+		# CWL + PL + BL/2 + tWTR_S Minimum time from write command to read command for different bank group. Includes time for bus turn
+		# round, recovery times, and all per-bank, per-rank, and global constraints. Present only in designs configured to support DDR4
+		#  Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burst length. This must match the value programm
+		# d in the BL bit of the mode register to the SDRAM - tWTR_S = internal write to read command delay for different bank group. T
+		# is comes directly from the SDRAM specification. For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using 
+		# he above equation by 2, and round it up to next integer.
+		# PSU_DDRC_DRAMTMG9_WR2RD_S                                                       0xb
+
+		# SDRAM Timing Register 9
+		#(OFFSET, MASK, VALUE)      (0XFD070124, 0x40070F3FU ,0x0002020BU)  */
+    mask_write 0XFD070124 0x40070F3F 0x0002020B
+		# Register : DRAMTMG11 @ 0XFD07012C

+
+		# tXMPDLL: This is the minimum Exit MPSM to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program
+		# this to (tXMPDLL/2) and round it up to the next integer value. Present only in designs configured to support DDR4. Unit: Mult
+		# ples of 32 clocks.
+		# PSU_DDRC_DRAMTMG11_POST_MPSM_GAP_X32                                            0x6f
+
+		# tMPX_LH: This is the minimum CS_n Low hold time to CKE rising edge. For configurations with MEMC_FREQ_RATIO=2, program this t
+		#  RoundUp(tMPX_LH/2)+1. Present only in designs configured to support DDR4. Unit: clocks.
+		# PSU_DDRC_DRAMTMG11_T_MPX_LH                                                     0x7
+
+		# tMPX_S: Minimum time CS setup time to CKE. For configurations with MEMC_FREQ_RATIO=2, program this to (tMPX_S/2) and round it
+		# up to the next integer value. Present only in designs configured to support DDR4. Unit: Clocks.
+		# PSU_DDRC_DRAMTMG11_T_MPX_S                                                      0x1
+
+		# tCKMPE: Minimum valid clock requirement after MPSM entry. Present only in designs configured to support DDR4. Unit: Clocks. F
+		# r configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next i
+		# teger.
+		# PSU_DDRC_DRAMTMG11_T_CKMPE                                                      0xe
+
+		# SDRAM Timing Register 11
+		#(OFFSET, MASK, VALUE)      (0XFD07012C, 0x7F1F031FU ,0x6F07010EU)  */
+    mask_write 0XFD07012C 0x7F1F031F 0x6F07010E
+		# Register : DRAMTMG12 @ 0XFD070130

+
+		# tCMDCKE: Delay from valid command to CKE input LOW. Set this to the larger of tESCKE or tCMDCKE For configurations with MEMC_
+		# REQ_RATIO=2, program this to (max(tESCKE, tCMDCKE)/2) and round it up to next integer value.
+		# PSU_DDRC_DRAMTMG12_T_CMDCKE                                                     0x2
+
+		# tCKEHCMD: Valid command requirement after CKE input HIGH. For configurations with MEMC_FREQ_RATIO=2, program this to (tCKEHCM
+		# /2) and round it up to next integer value.
+		# PSU_DDRC_DRAMTMG12_T_CKEHCMD                                                    0x6
+
+		# tMRD_PDA: This is the Mode Register Set command cycle time in PDA mode. For configurations with MEMC_FREQ_RATIO=2, program th
+		# s to (tMRD_PDA/2) and round it up to next integer value.
+		# PSU_DDRC_DRAMTMG12_T_MRD_PDA                                                    0x8
+
+		# SDRAM Timing Register 12
+		#(OFFSET, MASK, VALUE)      (0XFD070130, 0x00030F1FU ,0x00020608U)  */
+    mask_write 0XFD070130 0x00030F1F 0x00020608
+		# Register : ZQCTL0 @ 0XFD070180

+
+		# - 1 - Disable uMCTL2 generation of ZQCS/MPC(ZQ calibration) command. Register DBGCMD.zq_calib_short can be used instead to is
+		# ue ZQ calibration request from APB module. - 0 - Internally generate ZQCS/MPC(ZQ calibration) commands based on ZQCTL1.t_zq_s
+		# ort_interval_x1024. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_ZQCTL0_DIS_AUTO_ZQ                                                     0x1
+
+		# - 1 - Disable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Powerdown exit. Only applicable when run in DDR3
+		# or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. - 0 - Enable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Power
+		# own exit. Only applicable when run in DDR3 or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. This is only present for designs suppo
+		# ting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_ZQCTL0_DIS_SRX_ZQCL                                                    0x0
+
+		# - 1 - Denotes that ZQ resistor is shared between ranks. Means ZQinit/ZQCL/ZQCS/MPC(ZQ calibration) commands are sent to one r
+		# nk at a time with tZQinit/tZQCL/tZQCS/tZQCAL/tZQLAT timing met between commands so that commands to different ranks do not ov
+		# rlap. - 0 - ZQ resistor is not shared. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_ZQCTL0_ZQ_RESISTOR_SHARED                                              0x0
+
+		# - 1 - Disable issuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. - 0 - Enable 
+		# ssuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. This is only present for des
+		# gns supporting DDR4 devices.
+		# PSU_DDRC_ZQCTL0_DIS_MPSMX_ZQCL                                                  0x0
+
+		# tZQoper for DDR3/DDR4, tZQCL for LPDDR2/LPDDR3, tZQCAL for LPDDR4: Number of cycles of NOP required after a ZQCL (ZQ calibrat
+		# on long)/MPC(ZQ Start) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2: DDR3/DDR4: program this to tZQo
+		# er/2 and round it up to the next integer value. LPDDR2/LPDDR3: program this to tZQCL/2 and round it up to the next integer va
+		# ue. LPDDR4: program this to tZQCAL/2 and round it up to the next integer value. Unit: Clock cycles. This is only present for 
+		# esigns supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_ZQCTL0_T_ZQ_LONG_NOP                                                   0x100
+
+		# tZQCS for DDR3/DD4/LPDDR2/LPDDR3, tZQLAT for LPDDR4: Number of cycles of NOP required after a ZQCS (ZQ calibration short)/MPC
+		# ZQ Latch) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2, program this to tZQCS/2 and round it up to t
+		# e next integer value. Unit: Clock cycles. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devic
+		# s.
+		# PSU_DDRC_ZQCTL0_T_ZQ_SHORT_NOP                                                  0x40
+
+		# ZQ Control Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070180, 0xF7FF03FFU ,0x81000040U)  */
+    mask_write 0XFD070180 0xF7FF03FF 0x81000040
+		# Register : ZQCTL1 @ 0XFD070184

+
+		# tZQReset: Number of cycles of NOP required after a ZQReset (ZQ calibration Reset) command is issued to SDRAM. For configurati
+		# ns with MEMC_FREQ_RATIO=2, program this to tZQReset/2 and round it up to the next integer value. Unit: Clock cycles. This is 
+		# nly present for designs supporting LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_ZQCTL1_T_ZQ_RESET_NOP                                                  0x20
+
+		# Average interval to wait between automatically issuing ZQCS (ZQ calibration short)/MPC(ZQ calibration) commands to DDR3/DDR4/
+		# PDDR2/LPDDR3/LPDDR4 devices. Meaningless, if ZQCTL0.dis_auto_zq=1. Unit: 1024 clock cycles. This is only present for designs 
+		# upporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		# PSU_DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024                                       0x19707
+
+		# ZQ Control Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070184, 0x3FFFFFFFU ,0x02019707U)  */
+    mask_write 0XFD070184 0x3FFFFFFF 0x02019707
+		# Register : DFITMG0 @ 0XFD070190

+
+		# Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		# s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		# , this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		#  this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
+		# PSU_DDRC_DFITMG0_DFI_T_CTRL_DELAY                                               0x4
+
+		# Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		# 0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		# fer to PHY specification for correct value.
+		# PSU_DDRC_DFITMG0_DFI_RDDATA_USE_SDR                                             0x1
+
+		# Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		# ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		# , it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		#  latency through the RDIMM. Unit: Clocks
+		# PSU_DDRC_DFITMG0_DFI_T_RDDATA_EN                                                0xb
+
+		# Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		# .dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		# HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		# e.
+		# PSU_DDRC_DFITMG0_DFI_WRDATA_USE_SDR                                             0x1
+
+		# Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		#  dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		# te, max supported value is 8. Unit: Clocks
+		# PSU_DDRC_DFITMG0_DFI_TPHY_WRDATA                                                0x2
+
+		# Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		#  parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		#  necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		# rough the RDIMM.
+		# PSU_DDRC_DFITMG0_DFI_TPHY_WRLAT                                                 0xb
+
+		# DFI Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070190, 0x1FBFBF3FU ,0x048B820BU)  */
+    mask_write 0XFD070190 0x1FBFBF3F 0x048B820B
+		# Register : DFITMG1 @ 0XFD070194

+
+		# Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated command is driven. 
+		# his field is used for CAL mode, should be set to '0' or the value which matches the CAL mode register setting in the DRAM. If
+		# the PHY can add the latency for CAL mode, this should be set to '0'. Valid Range: 0, 3, 4, 5, 6, and 8
+		# PSU_DDRC_DFITMG1_DFI_T_CMD_LAT                                                  0x0
+
+		# Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated dfi_parity_in signa
+		#  is driven.
+		# PSU_DDRC_DFITMG1_DFI_T_PARIN_LAT                                                0x0
+
+		# Specifies the number of DFI clocks between when the dfi_wrdata_en signal is asserted and when the corresponding write data tr
+		# nsfer is completed on the DRAM bus. This corresponds to the DFI timing parameter twrdata_delay. Refer to PHY specification fo
+		#  correct value. For DFI 3.0 PHY, set to twrdata_delay, a new timing parameter introduced in DFI 3.0. For DFI 2.1 PHY, set to 
+		# phy_wrdata + (delay of DFI write data to the DRAM). Value to be programmed is in terms of DFI clocks, not PHY clocks. In FREQ
+		# RATIO=2, divide PHY's value by 2 and round up to next integer. If using DFITMG0.dfi_wrdata_use_sdr=1, add 1 to the value. Uni
+		# : Clocks
+		# PSU_DDRC_DFITMG1_DFI_T_WRDATA_DELAY                                             0x3
+
+		# Specifies the number of DFI clock cycles from the assertion of the dfi_dram_clk_disable signal on the DFI until the clock to 
+		# he DRAM memory devices, at the PHY-DRAM boundary, maintains a low value. If the DFI clock and the memory clock are not phase 
+		# ligned, this timing parameter should be rounded up to the next integer value.
+		# PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE                                         0x3
+
+		# Specifies the number of DFI clock cycles from the de-assertion of the dfi_dram_clk_disable signal on the DFI until the first 
+		# alid rising edge of the clock to the DRAM memory devices, at the PHY-DRAM boundary. If the DFI clock and the memory clock are
+		# not phase aligned, this timing parameter should be rounded up to the next integer value.
+		# PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE                                          0x4
+
+		# DFI Timing Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070194, 0xF31F0F0FU ,0x00030304U)  */
+    mask_write 0XFD070194 0xF31F0F0F 0x00030304
+		# Register : DFILPCFG0 @ 0XFD070198

+
+		# Setting for DFI's tlp_resp time. Same value is used for both Power Down, Self Refresh, Deep Power Down and Maximum Power Savi
+		# g modes. DFI 2.1 specification onwards, recommends using a fixed value of 7 always.
+		# PSU_DDRC_DFILPCFG0_DFI_TLP_RESP                                                 0x7
+
+		# Value to drive on dfi_lp_wakeup signal when Deep Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16
+		# cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7
+		# - 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 
+		# 31072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting mDDR or LPDDR2/LPDDR3 device
+		# .
+		# PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD                                            0x0
+
+		# Enables DFI Low Power interface handshaking during Deep Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled This is only pres
+		# nt for designs supporting mDDR or LPDDR2/LPDDR3 devices.
+		# PSU_DDRC_DFILPCFG0_DFI_LP_EN_DPD                                                0x0
+
+		# Value to drive on dfi_lp_wakeup signal when Self Refresh mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cy
+		# les - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 
+		# 048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 131
+		# 72 cycles - 0xE - 262144 cycles - 0xF - Unlimited
+		# PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR                                             0x0
+
+		# Enables DFI Low Power interface handshaking during Self Refresh Entry/Exit. - 0 - Disabled - 1 - Enabled
+		# PSU_DDRC_DFILPCFG0_DFI_LP_EN_SR                                                 0x1
+
+		# Value to drive on dfi_lp_wakeup signal when Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cycl
+		# s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20
+		# 8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107
+		#  cycles - 0xE - 262144 cycles - 0xF - Unlimited
+		# PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD                                             0x4
+
+		# Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled
+		# PSU_DDRC_DFILPCFG0_DFI_LP_EN_PD                                                 0x1
+
+		# DFI Low Power Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070198, 0x0FF1F1F1U ,0x07000141U)  */
+    mask_write 0XFD070198 0x0FF1F1F1 0x07000141
+		# Register : DFILPCFG1 @ 0XFD07019C

+
+		# Value to drive on dfi_lp_wakeup signal when Maximum Power Saving Mode is entered. Determines the DFI's tlp_wakeup time: - 0x0
+		# - 16 cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles 
+		#  0x7 - 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0
+		# D - 131072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting DDR4 devices.
+		# PSU_DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM                                           0x2
+
+		# Enables DFI Low Power interface handshaking during Maximum Power Saving Mode Entry/Exit. - 0 - Disabled - 1 - Enabled This is
+		# only present for designs supporting DDR4 devices.
+		# PSU_DDRC_DFILPCFG1_DFI_LP_EN_MPSM                                               0x1
+
+		# DFI Low Power Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD07019C, 0x000000F1U ,0x00000021U)  */
+    mask_write 0XFD07019C 0x000000F1 0x00000021
+		# Register : DFIUPD1 @ 0XFD0701A4

+
+		# This is the minimum amount of time between uMCTL2 initiated DFI update requests (which is executed whenever the uMCTL2 is idl
+		# ). Set this number higher to reduce the frequency of update requests, which can have a small impact on the latency of the fir
+		# t read request when the uMCTL2 is idle. Unit: 1024 clocks
+		# PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024                               0x41
+
+		# This is the maximum amount of time between uMCTL2 initiated DFI update requests. This timer resets with each update request; 
+		# hen the timer expires dfi_ctrlupd_req is sent and traffic is blocked until the dfi_ctrlupd_ackx is received. PHY can use this
+		# idle time to recalibrate the delay lines to the DLLs. The DFI controller update is also used to reset PHY FIFO pointers in ca
+		# e of data capture errors. Updates are required to maintain calibration over PVT, but frequent updates may impact performance.
+		# Note: Value programmed for DFIUPD1.dfi_t_ctrlupd_interval_max_x1024 must be greater than DFIUPD1.dfi_t_ctrlupd_interval_min_x
+		# 024. Unit: 1024 clocks
+		# PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024                               0xe2
+
+		# DFI Update Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD0701A4, 0x00FF00FFU ,0x004100E2U)  */
+    mask_write 0XFD0701A4 0x00FF00FF 0x004100E2
+		# Register : DFIMISC @ 0XFD0701B0

+
+		# Defines polarity of dfi_wrdata_cs and dfi_rddata_cs signals. - 0: Signals are active low - 1: Signals are active high
+		# PSU_DDRC_DFIMISC_DFI_DATA_CS_POLARITY                                           0x0
+
+		# DBI implemented in DDRC or PHY. - 0 - DDRC implements DBI functionality. - 1 - PHY implements DBI functionality. Present only
+		# in designs configured to support DDR4 and LPDDR4.
+		# PSU_DDRC_DFIMISC_PHY_DBI_MODE                                                   0x0
+
+		# PHY initialization complete enable signal. When asserted the dfi_init_complete signal can be used to trigger SDRAM initialisa
+		# ion
+		# PSU_DDRC_DFIMISC_DFI_INIT_COMPLETE_EN                                           0x0
+
+		# DFI Miscellaneous Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0701B0, 0x00000007U ,0x00000000U)  */
+    mask_write 0XFD0701B0 0x00000007 0x00000000
+		# Register : DFITMG2 @ 0XFD0701B4

+
+		# >Number of clocks between when a read command is sent on the DFI control interface and when the associated dfi_rddata_cs sign
+		# l is asserted. This corresponds to the DFI timing parameter tphy_rdcslat. Refer to PHY specification for correct value.
+		# PSU_DDRC_DFITMG2_DFI_TPHY_RDCSLAT                                               0x9
+
+		# Number of clocks between when a write command is sent on the DFI control interface and when the associated dfi_wrdata_cs sign
+		# l is asserted. This corresponds to the DFI timing parameter tphy_wrcslat. Refer to PHY specification for correct value.
+		# PSU_DDRC_DFITMG2_DFI_TPHY_WRCSLAT                                               0x6
+
+		# DFI Timing Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD0701B4, 0x00003F3FU ,0x00000906U)  */
+    mask_write 0XFD0701B4 0x00003F3F 0x00000906
+		# Register : DBICTL @ 0XFD0701C0

+
+		# Read DBI enable signal in DDRC. - 0 - Read DBI is disabled. - 1 - Read DBI is enabled. This signal must be set the same value
+		# as DRAM's mode register. - DDR4: MR5 bit A12. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[6]
+		# PSU_DDRC_DBICTL_RD_DBI_EN                                                       0x0
+
+		# Write DBI enable signal in DDRC. - 0 - Write DBI is disabled. - 1 - Write DBI is enabled. This signal must be set the same va
+		# ue as DRAM's mode register. - DDR4: MR5 bit A11. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[7]
+		# PSU_DDRC_DBICTL_WR_DBI_EN                                                       0x0
+
+		# DM enable signal in DDRC. - 0 - DM is disabled. - 1 - DM is enabled. This signal must be set the same logical value as DRAM's
+		# mode register. - DDR4: Set this to same value as MR5 bit A10. When x4 devices are used, this signal must be set to 0. - LPDDR
+		# : Set this to inverted value of MR13[5] which is opposite polarity from this signal
+		# PSU_DDRC_DBICTL_DM_EN                                                           0x1
+
+		# DM/DBI Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0701C0, 0x00000007U ,0x00000001U)  */
+    mask_write 0XFD0701C0 0x00000007 0x00000001
+		# Register : ADDRMAP0 @ 0XFD070200

+
+		# Selects the HIF address bit used as rank address bit 0. Valid Range: 0 to 27, and 31 Internal Base: 6 The selected HIF addres
+		#  bit is determined by adding the internal base to the value of this field. If set to 31, rank address bit 0 is set to 0.
+		# PSU_DDRC_ADDRMAP0_ADDRMAP_CS_BIT0                                               0x1f
+
+		# Address Map Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070200, 0x0000001FU ,0x0000001FU)  */
+    mask_write 0XFD070200 0x0000001F 0x0000001F
+		# Register : ADDRMAP1 @ 0XFD070204

+
+		# Selects the HIF address bit used as bank address bit 2. Valid Range: 0 to 29 and 31 Internal Base: 4 The selected HIF address
+		# bit is determined by adding the internal base to the value of this field. If set to 31, bank address bit 2 is set to 0.
+		# PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B2                                               0x1f
+
+		# Selects the HIF address bits used as bank address bit 1. Valid Range: 0 to 30 Internal Base: 3 The selected HIF address bit f
+		# r each of the bank address bits is determined by adding the internal base to the value of this field.
+		# PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B1                                               0xa
+
+		# Selects the HIF address bits used as bank address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address bit f
+		# r each of the bank address bits is determined by adding the internal base to the value of this field.
+		# PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B0                                               0xa
+
+		# Address Map Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070204, 0x001F1F1FU ,0x001F0A0AU)  */
+    mask_write 0XFD070204 0x001F1F1F 0x001F0A0A
+		# Register : ADDRMAP2 @ 0XFD070208

+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 5. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 6. - Quarter bus width mode: Selects the HIF address bit used as column address bit 7 . Vali
+		#  Range: 0 to 7, and 15 Internal Base: 5 The selected HIF address bit is determined by adding the internal base to the value o
+		#  this field. If set to 15, this column address bit is set to 0.
+		# PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B5                                                0x0
+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 4. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 5. - Quarter bus width mode: Selects the HIF address bit used as column address bit 6. Valid
+		# Range: 0 to 7, and 15 Internal Base: 4 The selected HIF address bit is determined by adding the internal base to the value of
+		# this field. If set to 15, this column address bit is set to 0.
+		# PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B4                                                0x0
+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 3. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 4. - Quarter bus width mode: Selects the HIF address bit used as column address bit 5. Valid
+		# Range: 0 to 7 Internal Base: 3 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		# ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=16, it is required to program this to 0, hence register does not exist i
+		#  this case.
+		# PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B3                                                0x0
+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 2. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 3. - Quarter bus width mode: Selects the HIF address bit used as column address bit 4. Valid
+		# Range: 0 to 7 Internal Base: 2 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		# ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=8 or 16, it is required to program this to 0.
+		# PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B2                                                0x0
+
+		# Address Map Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD070208, 0x0F0F0F0FU ,0x00000000U)  */
+    mask_write 0XFD070208 0x0F0F0F0F 0x00000000
+		# Register : ADDRMAP3 @ 0XFD07020C

+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 9. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: Selects the HIF address bit used as
+		# column address bit 13 (11 in LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 9 The selected HIF address bit i
+		#  determined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: 
+		# er JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source addr
+		# ss bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus an
+		#  hence column bit 10 is used.
+		# PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B9                                                0x0
+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 8. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 9. - Quarter bus width mode: Selects the HIF address bit used as column address bit 11 (10 i
+		#  LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 8 The selected HIF address bit is determined by adding the i
+		# ternal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specif
+		# cation, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to col
+		# mn address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is use
+		# .
+		# PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B8                                                0x0
+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 7. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 8. - Quarter bus width mode: Selects the HIF address bit used as column address bit 9. Valid
+		# Range: 0 to 7, and 15 Internal Base: 7 The selected HIF address bit is determined by adding the internal base to the value of
+		# this field. If set to 15, this column address bit is set to 0.
+		# PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B7                                                0x0
+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 6. - Half bus width mode: Selects the HIF addre
+		# s bit used as column address bit 7. - Quarter bus width mode: Selects the HIF address bit used as column address bit 8. Valid
+		# Range: 0 to 7, and 15 Internal Base: 6 The selected HIF address bit is determined by adding the internal base to the value of
+		# this field. If set to 15, this column address bit is set to 0.
+		# PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B6                                                0x0
+
+		# Address Map Register 3
+		#(OFFSET, MASK, VALUE)      (0XFD07020C, 0x0F0F0F0FU ,0x00000000U)  */
+    mask_write 0XFD07020C 0x0F0F0F0F 0x00000000
+		# Register : ADDRMAP4 @ 0XFD070210

+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Half bus width
+		# mode: Unused. To make it unused, this should be tied to 4'hF. - Quarter bus width mode: Unused. To make it unused, this must 
+		# e tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 11 The selected HIF address bit is determined by adding the intern
+		# l base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specificati
+		# n, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to column a
+		# dress bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is used.
+		# PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B11                                               0xf
+
+		# - Full bus width mode: Selects the HIF address bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Half bus width
+		# mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: UNUSED.
+		# To make it unused, this must be tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 10 The selected HIF address bit is d
+		# termined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per
+		# JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source address
+		# bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and h
+		# nce column bit 10 is used.
+		# PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B10                                               0xf
+
+		# Address Map Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD070210, 0x00000F0FU ,0x00000F0FU)  */
+    mask_write 0XFD070210 0x00000F0F 0x00000F0F
+		# Register : ADDRMAP5 @ 0XFD070214

+
+		# Selects the HIF address bit used as row address bit 11. Valid Range: 0 to 11, and 15 Internal Base: 17 The selected HIF addre
+		# s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 11 is set to 0.
+		# PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B11                                               0x8
+
+		# Selects the HIF address bits used as row address bits 2 to 10. Valid Range: 0 to 11, and 15 Internal Base: 8 (for row address
+		# bit 2), 9 (for row address bit 3), 10 (for row address bit 4) etc increasing to 16 (for row address bit 10) The selected HIF 
+		# ddress bit for each of the row address bits is determined by adding the internal base to the value of this field. When value 
+		# 5 is used the values of row address bits 2 to 10 are defined by registers ADDRMAP9, ADDRMAP10, ADDRMAP11.
+		# PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10                                             0xf
+
+		# Selects the HIF address bits used as row address bit 1. Valid Range: 0 to 11 Internal Base: 7 The selected HIF address bit fo
+		#  each of the row address bits is determined by adding the internal base to the value of this field.
+		# PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B1                                                0x8
+
+		# Selects the HIF address bits used as row address bit 0. Valid Range: 0 to 11 Internal Base: 6 The selected HIF address bit fo
+		#  each of the row address bits is determined by adding the internal base to the value of this field.
+		# PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B0                                                0x8
+
+		# Address Map Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD070214, 0x0F0F0F0FU ,0x080F0808U)  */
+    mask_write 0XFD070214 0x0F0F0F0F 0x080F0808
+		# Register : ADDRMAP6 @ 0XFD070218

+
+		# Set this to 1 if there is an LPDDR3 SDRAM 6Gb or 12Gb device in use. - 1 - LPDDR3 SDRAM 6Gb/12Gb device in use. Every address
+		# having row[14:13]==2'b11 is considered as invalid - 0 - non-LPDDR3 6Gb/12Gb device in use. All addresses are valid Present on
+		# y in designs configured to support LPDDR3.
+		# PSU_DDRC_ADDRMAP6_LPDDR3_6GB_12GB                                               0x0
+
+		# Selects the HIF address bit used as row address bit 15. Valid Range: 0 to 11, and 15 Internal Base: 21 The selected HIF addre
+		# s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 15 is set to 0.
+		# PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B15                                               0xf
+
+		# Selects the HIF address bit used as row address bit 14. Valid Range: 0 to 11, and 15 Internal Base: 20 The selected HIF addre
+		# s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 14 is set to 0.
+		# PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B14                                               0x8
+
+		# Selects the HIF address bit used as row address bit 13. Valid Range: 0 to 11, and 15 Internal Base: 19 The selected HIF addre
+		# s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 13 is set to 0.
+		# PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B13                                               0x8
+
+		# Selects the HIF address bit used as row address bit 12. Valid Range: 0 to 11, and 15 Internal Base: 18 The selected HIF addre
+		# s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 12 is set to 0.
+		# PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B12                                               0x8
+
+		# Address Map Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD070218, 0x8F0F0F0FU ,0x0F080808U)  */
+    mask_write 0XFD070218 0x8F0F0F0F 0x0F080808
+		# Register : ADDRMAP7 @ 0XFD07021C

+
+		# Selects the HIF address bit used as row address bit 17. Valid Range: 0 to 10, and 15 Internal Base: 23 The selected HIF addre
+		# s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 17 is set to 0.
+		# PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B17                                               0xf
+
+		# Selects the HIF address bit used as row address bit 16. Valid Range: 0 to 11, and 15 Internal Base: 22 The selected HIF addre
+		# s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 16 is set to 0.
+		# PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B16                                               0xf
+
+		# Address Map Register 7
+		#(OFFSET, MASK, VALUE)      (0XFD07021C, 0x00000F0FU ,0x00000F0FU)  */
+    mask_write 0XFD07021C 0x00000F0F 0x00000F0F
+		# Register : ADDRMAP8 @ 0XFD070220

+
+		# Selects the HIF address bits used as bank group address bit 1. Valid Range: 0 to 30, and 31 Internal Base: 3 The selected HIF
+		# address bit for each of the bank group address bits is determined by adding the internal base to the value of this field. If 
+		# et to 31, bank group address bit 1 is set to 0.
+		# PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B1                                                 0x8
+
+		# Selects the HIF address bits used as bank group address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address
+		# bit for each of the bank group address bits is determined by adding the internal base to the value of this field.
+		# PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B0                                                 0x8
+
+		# Address Map Register 8
+		#(OFFSET, MASK, VALUE)      (0XFD070220, 0x00001F1FU ,0x00000808U)  */
+    mask_write 0XFD070220 0x00001F1F 0x00000808
+		# Register : ADDRMAP9 @ 0XFD070224

+
+		# Selects the HIF address bits used as row address bit 5. Valid Range: 0 to 11 Internal Base: 11 The selected HIF address bit f
+		# r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		# ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B5                                                0x8
+
+		# Selects the HIF address bits used as row address bit 4. Valid Range: 0 to 11 Internal Base: 10 The selected HIF address bit f
+		# r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		# ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B4                                                0x8
+
+		# Selects the HIF address bits used as row address bit 3. Valid Range: 0 to 11 Internal Base: 9 The selected HIF address bit fo
+		#  each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		# d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B3                                                0x8
+
+		# Selects the HIF address bits used as row address bit 2. Valid Range: 0 to 11 Internal Base: 8 The selected HIF address bit fo
+		#  each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		# d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B2                                                0x8
+
+		# Address Map Register 9
+		#(OFFSET, MASK, VALUE)      (0XFD070224, 0x0F0F0F0FU ,0x08080808U)  */
+    mask_write 0XFD070224 0x0F0F0F0F 0x08080808
+		# Register : ADDRMAP10 @ 0XFD070228

+
+		# Selects the HIF address bits used as row address bit 9. Valid Range: 0 to 11 Internal Base: 15 The selected HIF address bit f
+		# r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		# ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B9                                               0x8
+
+		# Selects the HIF address bits used as row address bit 8. Valid Range: 0 to 11 Internal Base: 14 The selected HIF address bit f
+		# r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		# ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B8                                               0x8
+
+		# Selects the HIF address bits used as row address bit 7. Valid Range: 0 to 11 Internal Base: 13 The selected HIF address bit f
+		# r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		# ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B7                                               0x8
+
+		# Selects the HIF address bits used as row address bit 6. Valid Range: 0 to 11 Internal Base: 12 The selected HIF address bit f
+		# r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		# ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B6                                               0x8
+
+		# Address Map Register 10
+		#(OFFSET, MASK, VALUE)      (0XFD070228, 0x0F0F0F0FU ,0x08080808U)  */
+    mask_write 0XFD070228 0x0F0F0F0F 0x08080808
+		# Register : ADDRMAP11 @ 0XFD07022C

+
+		# Selects the HIF address bits used as row address bit 10. Valid Range: 0 to 11 Internal Base: 16 The selected HIF address bit 
+		# or each of the row address bits is determined by adding the internal base to the value of this field. This register field is 
+		# sed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		# PSU_DDRC_ADDRMAP11_ADDRMAP_ROW_B10                                              0x8
+
+		# Address Map Register 11
+		#(OFFSET, MASK, VALUE)      (0XFD07022C, 0x0000000FU ,0x00000008U)  */
+    mask_write 0XFD07022C 0x0000000F 0x00000008
+		# Register : ODTCFG @ 0XFD070240

+
+		# Cycles to hold ODT for a write command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x5 (DDR2-400/533/
+		# 67), 0x6 (DDR2-800), 0x7 (DDR2-1066) - BL4: 0x3 (DDR2-400/533/667), 0x4 (DDR2-800), 0x5 (DDR2-1066) DDR3: - BL8: 0x6 DDR4: - 
+		# L8: 5 + WR_PREAMBLE + CRC_MODE WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) CRC_MODE = 0 (not CRC mode), 1 
+		# CRC mode) LPDDR3: - BL8: 7 + RU(tODTon(max)/tCK)
+		# PSU_DDRC_ODTCFG_WR_ODT_HOLD                                                     0x6
+
+		# The delay, in clock cycles, from issuing a write command to setting ODT values associated with that command. ODT setting must
+		# remain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CWL + AL - 3 (DDR2-400/533/
+		# 67), CWL + AL - 4 (DDR2-800), CWL + AL - 5 (DDR2-1066) If (CWL + AL - 3 < 0), uMCTL2 does not support ODT for write operation
+		#  DDR3: - 0x0 DDR4: - DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) LPDDR3: - WL - 1 - RU(tODTon(max)/tCK))
+		# PSU_DDRC_ODTCFG_WR_ODT_DELAY                                                    0x0
+
+		# Cycles to hold ODT for a read command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x6 (not DDR2-1066)
+		#  0x7 (DDR2-1066) - BL4: 0x4 (not DDR2-1066), 0x5 (DDR2-1066) DDR3: - BL8 - 0x6 DDR4: - BL8: 5 + RD_PREAMBLE RD_PREAMBLE = 1 (
+		# tCK write preamble), 2 (2tCK write preamble) LPDDR3: - BL8: 5 + RU(tDQSCK(max)/tCK) - RD(tDQSCK(min)/tCK) + RU(tODTon(max)/tC
+		# )
+		# PSU_DDRC_ODTCFG_RD_ODT_HOLD                                                     0x6
+
+		# The delay, in clock cycles, from issuing a read command to setting ODT values associated with that command. ODT setting must 
+		# emain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CL + AL - 4 (not DDR2-1066),
+		# CL + AL - 5 (DDR2-1066) If (CL + AL - 4 < 0), uMCTL2 does not support ODT for read operation. DDR3: - CL - CWL DDR4: - CL - C
+		# L - RD_PREAMBLE + WR_PREAMBLE + DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK
+		# write preamble) RD_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) If (CL - CWL - RD_PREAMBLE + WR_PREAMBLE) < 0,
+		# uMCTL2 does not support ODT for read operation. LPDDR3: - RL + RD(tDQSCK(min)/tCK) - 1 - RU(tODTon(max)/tCK)
+		# PSU_DDRC_ODTCFG_RD_ODT_DELAY                                                    0x0
+
+		# ODT Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD070240, 0x0F1F0F7CU ,0x06000600U)  */
+    mask_write 0XFD070240 0x0F1F0F7C 0x06000600
+		# Register : ODTMAP @ 0XFD070244

+
+		# Indicates which remote ODTs must be turned on during a read from rank 1. Each rank has a remote ODT (in the SDRAM) which can 
+		# e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		#  etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
+		# PSU_DDRC_ODTMAP_RANK1_RD_ODT                                                    0x0
+
+		# Indicates which remote ODTs must be turned on during a write to rank 1. Each rank has a remote ODT (in the SDRAM) which can b
+		#  turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		# etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
+		# PSU_DDRC_ODTMAP_RANK1_WR_ODT                                                    0x0
+
+		# Indicates which remote ODTs must be turned on during a read from rank 0. Each rank has a remote ODT (in the SDRAM) which can 
+		# e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		#  etc. For each rank, set its bit to 1 to enable its ODT.
+		# PSU_DDRC_ODTMAP_RANK0_RD_ODT                                                    0x0
+
+		# Indicates which remote ODTs must be turned on during a write to rank 0. Each rank has a remote ODT (in the SDRAM) which can b
+		#  turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		# etc. For each rank, set its bit to 1 to enable its ODT.
+		# PSU_DDRC_ODTMAP_RANK0_WR_ODT                                                    0x1
+
+		# ODT/Rank Map Register
+		#(OFFSET, MASK, VALUE)      (0XFD070244, 0x00003333U ,0x00000001U)  */
+    mask_write 0XFD070244 0x00003333 0x00000001
+		# Register : SCHED @ 0XFD070250

+
+		# When the preferred transaction store is empty for these many clock cycles, switch to the alternate transaction store if it is
+		# non-empty. The read transaction store (both high and low priority) is the default preferred transaction store and the write t
+		# ansaction store is the alternative store. When prefer write over read is set this is reversed. 0x0 is a legal value for this 
+		# egister. When set to 0x0, the transaction store switching will happen immediately when the switching conditions become true. 
+		# OR PERFORMANCE ONLY
+		# PSU_DDRC_SCHED_RDWR_IDLE_GAP                                                    0x1
+
+		# UNUSED
+		# PSU_DDRC_SCHED_GO2CRITICAL_HYSTERESIS                                           0x0
+
+		# Number of entries in the low priority transaction store is this value + 1. (MEMC_NO_OF_ENTRY - (SCHED.lpr_num_entries + 1)) i
+		#  the number of entries available for the high priority transaction store. Setting this to maximum value allocates all entries
+		# to low priority transaction store. Setting this to 0 allocates 1 entry to low priority transaction store and the rest to high
+		# priority transaction store. Note: In ECC configurations, the numbers of write and low priority read credits issued is one les
+		#  than in the non-ECC case. One entry each is reserved in the write and low-priority read CAMs for storing the RMW requests ar
+		# sing out of single bit error correction RMW operation.
+		# PSU_DDRC_SCHED_LPR_NUM_ENTRIES                                                  0x20
+
+		# If true, bank is kept open only while there are page hit transactions available in the CAM to that bank. The last read or wri
+		# e command in the CAM with a bank and page hit will be executed with auto-precharge if SCHED1.pageclose_timer=0. Even if this 
+		# egister set to 1 and SCHED1.pageclose_timer is set to 0, explicit precharge (and not auto-precharge) may be issued in some ca
+		# es where there is a mode switch between Write and Read or between LPR and HPR. The Read and Write commands that are executed 
+		# s part of the ECC scrub requests are also executed without auto-precharge. If false, the bank remains open until there is a n
+		# ed to close it (to open a different page, or for page timeout or refresh timeout) - also known as open page policy. The open 
+		# age policy can be overridden by setting the per-command-autopre bit on the HIF interface (hif_cmd_autopre). The pageclose fea
+		# ure provids a midway between Open and Close page policies. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_SCHED_PAGECLOSE                                                        0x0
+
+		# If set then the bank selector prefers writes over reads. FOR DEBUG ONLY.
+		# PSU_DDRC_SCHED_PREFER_WRITE                                                     0x0
+
+		# Active low signal. When asserted ('0'), all incoming transactions are forced to low priority. This implies that all High Prio
+		# ity Read (HPR) and Variable Priority Read commands (VPR) will be treated as Low Priority Read (LPR) commands. On the write si
+		# e, all Variable Priority Write (VPW) commands will be treated as Normal Priority Write (NPW) commands. Forcing the incoming t
+		# ansactions to low priority implicitly turns off Bypass path for read commands. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_SCHED_FORCE_LOW_PRI_N                                                  0x1
+
+		# Scheduler Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD070250, 0x7FFF3F07U ,0x01002001U)  */
+    mask_write 0XFD070250 0x7FFF3F07 0x01002001
+		# Register : PERFLPR1 @ 0XFD070264

+
+		# Number of transactions that are serviced once the LPR queue goes critical is the smaller of: - (a) This number - (b) Number o
+		#  transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH                                           0x8
+
+		# Number of clocks that the LPR queue can be starved before it goes critical. The minimum valid functional value for this regis
+		# er is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not
+		# be disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PERFLPR1_LPR_MAX_STARVE                                                0x40
+
+		# Low Priority Read CAM Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070264, 0xFF00FFFFU ,0x08000040U)  */
+    mask_write 0XFD070264 0xFF00FFFF 0x08000040
+		# Register : PERFWR1 @ 0XFD07026C

+
+		# Number of transactions that are serviced once the WR queue goes critical is the smaller of: - (a) This number - (b) Number of
+		# transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PERFWR1_W_XACT_RUN_LENGTH                                              0x8
+
+		# Number of clocks that the WR queue can be starved before it goes critical. The minimum valid functional value for this regist
+		# r is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not 
+		# e disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
+		# PSU_DDRC_PERFWR1_W_MAX_STARVE                                                   0x40
+
+		# Write CAM Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD07026C, 0xFF00FFFFU ,0x08000040U)  */
+    mask_write 0XFD07026C 0xFF00FFFF 0x08000040
+		# Register : DQMAP5 @ 0XFD070294

+
+		# All even ranks have the same DQ mapping controled by DQMAP0-4 register as rank 0. This register provides DQ swap function for
+		# all odd ranks to support CRC feature. rank based DQ swapping is: swap bit 0 with 1, swap bit 2 with 3, swap bit 4 with 5 and 
+		# wap bit 6 with 7. 1: Disable rank based DQ swapping 0: Enable rank based DQ swapping Present only in designs configured to su
+		# port DDR4.
+		# PSU_DDRC_DQMAP5_DIS_DQ_RANK_SWAP                                                0x1
+
+		# DQ Map Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD070294, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD070294 0x00000001 0x00000001
+		# Register : DBG0 @ 0XFD070300

+
+		# When this is set to '0', auto-precharge is disabled for the flushed command in a collision case. Collision cases are write fo
+		# lowed by read to same address, read followed by write to same address, or write followed by write to same address with DBG0.d
+		# s_wc bit = 1 (where same address comparisons exclude the two address bits representing critical word). FOR DEBUG ONLY.
+		# PSU_DDRC_DBG0_DIS_COLLISION_PAGE_OPT                                            0x0
+
+		# When 1, disable write combine. FOR DEBUG ONLY
+		# PSU_DDRC_DBG0_DIS_WC                                                            0x0
+
+		# Debug Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070300, 0x00000011U ,0x00000000U)  */
+    mask_write 0XFD070300 0x00000011 0x00000000
+		# Register : DBGCMD @ 0XFD07030C

+
+		# Setting this register bit to 1 allows refresh and ZQCS commands to be triggered from hardware via the IOs ext_*. If set to 1,
+		# the fields DBGCMD.zq_calib_short and DBGCMD.rank*_refresh have no function, and are ignored by the uMCTL2 logic. Setting this
+		# register bit to 0 allows refresh and ZQCS to be triggered from software, via the fields DBGCMD.zq_calib_short and DBGCMD.rank
+		# _refresh. If set to 0, the hardware pins ext_* have no function, and are ignored by the uMCTL2 logic. This register is static
+		#  and may only be changed when the DDRC reset signal, core_ddrc_rstn, is asserted (0).
+		# PSU_DDRC_DBGCMD_HW_REF_ZQ_EN                                                    0x0
+
+		# Setting this register bit to 1 indicates to the uMCTL2 to issue a dfi_ctrlupd_req to the PHY. When this request is stored in 
+		# he uMCTL2, the bit is automatically cleared. This operation must only be performed when DFIUPD0.dis_auto_ctrlupd=1.
+		# PSU_DDRC_DBGCMD_CTRLUPD                                                         0x0
+
+		# Setting this register bit to 1 indicates to the uMCTL2 to issue a ZQCS (ZQ calibration short)/MPC(ZQ calibration) command to 
+		# he SDRAM. When this request is stored in the uMCTL2, the bit is automatically cleared. This operation can be performed only w
+		# en ZQCTL0.dis_auto_zq=1. It is recommended NOT to set this register bit if in Init operating mode. This register bit is ignor
+		# d when in Self-Refresh(except LPDDR4) and SR-Powerdown(LPDDR4) and Deep power-down operating modes and Maximum Power Saving M
+		# de.
+		# PSU_DDRC_DBGCMD_ZQ_CALIB_SHORT                                                  0x0
+
+		# Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 1. Writing to this bit causes DBGSTAT.rank1
+		# refresh_busy to be set. When DBGSTAT.rank1_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		# be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		# wn operating modes or Maximum Power Saving Mode.
+		# PSU_DDRC_DBGCMD_RANK1_REFRESH                                                   0x0
+
+		# Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 0. Writing to this bit causes DBGSTAT.rank0
+		# refresh_busy to be set. When DBGSTAT.rank0_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		# be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		# wn operating modes or Maximum Power Saving Mode.
+		# PSU_DDRC_DBGCMD_RANK0_REFRESH                                                   0x0
+
+		# Command Debug Register
+		#(OFFSET, MASK, VALUE)      (0XFD07030C, 0x80000033U ,0x00000000U)  */
+    mask_write 0XFD07030C 0x80000033 0x00000000
+		# Register : SWCTL @ 0XFD070320

+
+		# Enable quasi-dynamic register programming outside reset. Program register to 0 to enable quasi-dynamic programming. Set back 
+		# egister to 1 once programming is done.
+		# PSU_DDRC_SWCTL_SW_DONE                                                          0x0
+
+		# Software register programming control enable
+		#(OFFSET, MASK, VALUE)      (0XFD070320, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFD070320 0x00000001 0x00000000
+		# Register : PCCFG @ 0XFD070400

+
+		# Burst length expansion mode. By default (i.e. bl_exp_mode==0) XPI expands every AXI burst into multiple HIF commands, using t
+		# e memory burst length as a unit. If set to 1, then XPI will use half of the memory burst length as a unit. This applies to bo
+		# h reads and writes. When MSTR.data_bus_width==00, setting bl_exp_mode to 1 has no effect. This can be used in cases where Par
+		# ial Writes is enabled (UMCTL2_PARTIAL_WR=1) and DBG0.dis_wc=1, in order to avoid or minimize t_ccd_l penalty in DDR4 and t_cc
+		# _mw penalty in LPDDR4. Note that if DBICTL.reg_ddrc_dm_en=0, functionality is not supported in the following cases: - UMCTL2_
+		# ARTIAL_WR=0 - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=8 and MSTR.reg_ddrc_burst_rdwr=1000 (LP
+		# DR4 only) - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=4 and MSTR.reg_ddrc_burst_rdwr=0100 (DDR4
+		# only), with either MSTR.reg_ddrc_burstchop=0 or CRCPARCTL1.reg_ddrc_crc_enable=1 Functionality is also not supported if Share
+		# -AC is enabled
+		# PSU_DDRC_PCCFG_BL_EXP_MODE                                                      0x0
+
+		# Page match four limit. If set to 1, limits the number of consecutive same page DDRC transactions that can be granted by the P
+		# rt Arbiter to four when Page Match feature is enabled. If set to 0, there is no limit imposed on number of consecutive same p
+		# ge DDRC transactions.
+		# PSU_DDRC_PCCFG_PAGEMATCH_LIMIT                                                  0x0
+
+		# If set to 1 (enabled), sets co_gs_go2critical_wr and co_gs_go2critical_lpr/co_gs_go2critical_hpr signals going to DDRC based 
+		# n urgent input (awurgent, arurgent) coming from AXI master. If set to 0 (disabled), co_gs_go2critical_wr and co_gs_go2critica
+		# _lpr/co_gs_go2critical_hpr signals at DDRC are driven to 1b'0.
+		# PSU_DDRC_PCCFG_GO2CRITICAL_EN                                                   0x1
+
+		# Port Common Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD070400, 0x00000111U ,0x00000001U)  */
+    mask_write 0XFD070400 0x00000111 0x00000001
+		# Register : PCFGR_0 @ 0XFD070404

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		# If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		# o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		# ess handshaking (it is not associated with any particular command).
+		# PSU_DDRC_PCFGR_0_RD_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the read channel of the port.
+		# PSU_DDRC_PCFGR_0_RD_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		# ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		# he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		# will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		# ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		# aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		# ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		# ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		# RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		# he two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGR_0_RD_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Read Register
+		#(OFFSET, MASK, VALUE)      (0XFD070404, 0x000073FFU ,0x0000200FU)  */
+    mask_write 0XFD070404 0x000073FF 0x0000200F
+		# Register : PCFGW_0 @ 0XFD070408

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		# If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		#  Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		# not associated with any particular command).
+		# PSU_DDRC_PCFGW_0_WR_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the write channel of the port.
+		# PSU_DDRC_PCFGW_0_WR_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		# rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		# The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		# s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		#  the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		#  be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		# ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		# ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGW_0_WR_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Write Register
+		#(OFFSET, MASK, VALUE)      (0XFD070408, 0x000073FFU ,0x0000600FU)  */
+    mask_write 0XFD070408 0x000073FF 0x0000600F
+		# Register : PCTRL_0 @ 0XFD070490

+
+		# Enables port n.
+		# PSU_DDRC_PCTRL_0_PORT_EN                                                        0x1
+
+		# Port n Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD070490, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD070490 0x00000001 0x00000001
+		# Register : PCFGQOS0_0 @ 0XFD070494

+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		# gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		# disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION1                                            0x2
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		# urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		#  disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION0                                            0x0
+
+		# Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		# al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		# ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		#  values.
+		# PSU_DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1                                             0xb
+
+		# Port n Read QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070494, 0x0033000FU ,0x0020000BU)  */
+    mask_write 0XFD070494 0x0033000F 0x0020000B
+		# Register : PCFGQOS1_0 @ 0XFD070498

+
+		# Specifies the timeout value for transactions mapped to the red address queue.
+		# PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR                                           0x0
+
+		# Specifies the timeout value for transactions mapped to the blue address queue.
+		# PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB                                           0x0
+
+		# Port n Read QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070498, 0x07FF07FFU ,0x00000000U)  */
+    mask_write 0XFD070498 0x07FF07FF 0x00000000
+		# Register : PCFGR_1 @ 0XFD0704B4

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		# If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		# o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		# ess handshaking (it is not associated with any particular command).
+		# PSU_DDRC_PCFGR_1_RD_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the read channel of the port.
+		# PSU_DDRC_PCFGR_1_RD_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		# ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		# he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		# will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		# ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		# aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		# ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		# ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		# RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		# he two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGR_1_RD_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Read Register
+		#(OFFSET, MASK, VALUE)      (0XFD0704B4, 0x000073FFU ,0x0000200FU)  */
+    mask_write 0XFD0704B4 0x000073FF 0x0000200F
+		# Register : PCFGW_1 @ 0XFD0704B8

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		# If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		#  Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		# not associated with any particular command).
+		# PSU_DDRC_PCFGW_1_WR_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the write channel of the port.
+		# PSU_DDRC_PCFGW_1_WR_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		# rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		# The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		# s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		#  the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		#  be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		# ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		# ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGW_1_WR_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Write Register
+		#(OFFSET, MASK, VALUE)      (0XFD0704B8, 0x000073FFU ,0x0000600FU)  */
+    mask_write 0XFD0704B8 0x000073FF 0x0000600F
+		# Register : PCTRL_1 @ 0XFD070540

+
+		# Enables port n.
+		# PSU_DDRC_PCTRL_1_PORT_EN                                                        0x1
+
+		# Port n Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD070540, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD070540 0x00000001 0x00000001
+		# Register : PCFGQOS0_1 @ 0XFD070544

+
+		# This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		# ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		# s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION2                                            0x2
+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		# gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		# disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION1                                            0x0
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		# urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		#  disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION0                                            0x0
+
+		# Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		# el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		# directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		# ust be set to distinct values.
+		# PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2                                             0xb
+
+		# Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		# al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		# ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		#  values.
+		# PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1                                             0x3
+
+		# Port n Read QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070544, 0x03330F0FU ,0x02000B03U)  */
+    mask_write 0XFD070544 0x03330F0F 0x02000B03
+		# Register : PCFGQOS1_1 @ 0XFD070548

+
+		# Specifies the timeout value for transactions mapped to the red address queue.
+		# PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR                                           0x0
+
+		# Specifies the timeout value for transactions mapped to the blue address queue.
+		# PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB                                           0x0
+
+		# Port n Read QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070548, 0x07FF07FFU ,0x00000000U)  */
+    mask_write 0XFD070548 0x07FF07FF 0x00000000
+		# Register : PCFGR_2 @ 0XFD070564

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		# If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		# o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		# ess handshaking (it is not associated with any particular command).
+		# PSU_DDRC_PCFGR_2_RD_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the read channel of the port.
+		# PSU_DDRC_PCFGR_2_RD_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		# ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		# he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		# will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		# ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		# aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		# ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		# ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		# RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		# he two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGR_2_RD_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Read Register
+		#(OFFSET, MASK, VALUE)      (0XFD070564, 0x000073FFU ,0x0000200FU)  */
+    mask_write 0XFD070564 0x000073FF 0x0000200F
+		# Register : PCFGW_2 @ 0XFD070568

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		# If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		#  Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		# not associated with any particular command).
+		# PSU_DDRC_PCFGW_2_WR_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the write channel of the port.
+		# PSU_DDRC_PCFGW_2_WR_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		# rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		# The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		# s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		#  the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		#  be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		# ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		# ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGW_2_WR_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Write Register
+		#(OFFSET, MASK, VALUE)      (0XFD070568, 0x000073FFU ,0x0000600FU)  */
+    mask_write 0XFD070568 0x000073FF 0x0000600F
+		# Register : PCTRL_2 @ 0XFD0705F0

+
+		# Enables port n.
+		# PSU_DDRC_PCTRL_2_PORT_EN                                                        0x1
+
+		# Port n Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0705F0, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD0705F0 0x00000001 0x00000001
+		# Register : PCFGQOS0_2 @ 0XFD0705F4

+
+		# This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		# ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		# s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION2                                            0x2
+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		# gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		# disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION1                                            0x0
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		# urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		#  disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION0                                            0x0
+
+		# Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		# el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		# directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		# ust be set to distinct values.
+		# PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2                                             0xb
+
+		# Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		# al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		# ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		#  values.
+		# PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1                                             0x3
+
+		# Port n Read QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0705F4, 0x03330F0FU ,0x02000B03U)  */
+    mask_write 0XFD0705F4 0x03330F0F 0x02000B03
+		# Register : PCFGQOS1_2 @ 0XFD0705F8

+
+		# Specifies the timeout value for transactions mapped to the red address queue.
+		# PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR                                           0x0
+
+		# Specifies the timeout value for transactions mapped to the blue address queue.
+		# PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB                                           0x0
+
+		# Port n Read QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD0705F8, 0x07FF07FFU ,0x00000000U)  */
+    mask_write 0XFD0705F8 0x07FF07FF 0x00000000
+		# Register : PCFGR_3 @ 0XFD070614

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		# If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		# o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		# ess handshaking (it is not associated with any particular command).
+		# PSU_DDRC_PCFGR_3_RD_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the read channel of the port.
+		# PSU_DDRC_PCFGR_3_RD_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		# ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		# he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		# will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		# ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		# aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		# ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		# ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		# RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		# he two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGR_3_RD_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Read Register
+		#(OFFSET, MASK, VALUE)      (0XFD070614, 0x000073FFU ,0x0000200FU)  */
+    mask_write 0XFD070614 0x000073FF 0x0000200F
+		# Register : PCFGW_3 @ 0XFD070618

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		# If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		#  Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		# not associated with any particular command).
+		# PSU_DDRC_PCFGW_3_WR_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the write channel of the port.
+		# PSU_DDRC_PCFGW_3_WR_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		# rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		# The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		# s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		#  the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		#  be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		# ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		# ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGW_3_WR_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Write Register
+		#(OFFSET, MASK, VALUE)      (0XFD070618, 0x000073FFU ,0x0000600FU)  */
+    mask_write 0XFD070618 0x000073FF 0x0000600F
+		# Register : PCTRL_3 @ 0XFD0706A0

+
+		# Enables port n.
+		# PSU_DDRC_PCTRL_3_PORT_EN                                                        0x1
+
+		# Port n Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0706A0, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD0706A0 0x00000001 0x00000001
+		# Register : PCFGQOS0_3 @ 0XFD0706A4

+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		# gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		# disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION1                                            0x1
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		# urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		#  disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION0                                            0x0
+
+		# Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		# al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		# ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		#  values.
+		# PSU_DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1                                             0x3
+
+		# Port n Read QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0706A4, 0x0033000FU ,0x00100003U)  */
+    mask_write 0XFD0706A4 0x0033000F 0x00100003
+		# Register : PCFGQOS1_3 @ 0XFD0706A8

+
+		# Specifies the timeout value for transactions mapped to the red address queue.
+		# PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR                                           0x0
+
+		# Specifies the timeout value for transactions mapped to the blue address queue.
+		# PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		# Port n Read QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD0706A8, 0x07FF07FFU ,0x0000004FU)  */
+    mask_write 0XFD0706A8 0x07FF07FF 0x0000004F
+		# Register : PCFGWQOS0_3 @ 0XFD0706AC

+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		# VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		# PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1                                           0x1
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		# VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		# PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0                                           0x0
+
+		# Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		# rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		# s to higher port priority.
+		# PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL                                             0x3
+
+		# Port n Write QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0706AC, 0x0033000FU ,0x00100003U)  */
+    mask_write 0XFD0706AC 0x0033000F 0x00100003
+		# Register : PCFGWQOS1_3 @ 0XFD0706B0

+
+		# Specifies the timeout value for write transactions.
+		# PSU_DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT                                           0x4f
+
+		# Port n Write QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD0706B0, 0x000007FFU ,0x0000004FU)  */
+    mask_write 0XFD0706B0 0x000007FF 0x0000004F
+		# Register : PCFGR_4 @ 0XFD0706C4

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN                                           0x1
+
+		# If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		# o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		# ess handshaking (it is not associated with any particular command).
+		# PSU_DDRC_PCFGR_4_RD_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the read channel of the port.
+		# PSU_DDRC_PCFGR_4_RD_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		# ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		# he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		# will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		# ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		# aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		# ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		# ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		# RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		# he two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGR_4_RD_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Read Register
+		#(OFFSET, MASK, VALUE)      (0XFD0706C4, 0x000073FFU ,0x0000600FU)  */
+    mask_write 0XFD0706C4 0x000073FF 0x0000600F
+		# Register : PCFGW_4 @ 0XFD0706C8

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		# If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		#  Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		# not associated with any particular command).
+		# PSU_DDRC_PCFGW_4_WR_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the write channel of the port.
+		# PSU_DDRC_PCFGW_4_WR_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		# rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		# The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		# s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		#  the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		#  be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		# ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		# ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGW_4_WR_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Write Register
+		#(OFFSET, MASK, VALUE)      (0XFD0706C8, 0x000073FFU ,0x0000600FU)  */
+    mask_write 0XFD0706C8 0x000073FF 0x0000600F
+		# Register : PCTRL_4 @ 0XFD070750

+
+		# Enables port n.
+		# PSU_DDRC_PCTRL_4_PORT_EN                                                        0x1
+
+		# Port n Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD070750, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD070750 0x00000001 0x00000001
+		# Register : PCFGQOS0_4 @ 0XFD070754

+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		# gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		# disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION1                                            0x1
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		# urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		#  disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION0                                            0x0
+
+		# Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		# al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		# ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		#  values.
+		# PSU_DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1                                             0x3
+
+		# Port n Read QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070754, 0x0033000FU ,0x00100003U)  */
+    mask_write 0XFD070754 0x0033000F 0x00100003
+		# Register : PCFGQOS1_4 @ 0XFD070758

+
+		# Specifies the timeout value for transactions mapped to the red address queue.
+		# PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR                                           0x0
+
+		# Specifies the timeout value for transactions mapped to the blue address queue.
+		# PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		# Port n Read QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070758, 0x07FF07FFU ,0x0000004FU)  */
+    mask_write 0XFD070758 0x07FF07FF 0x0000004F
+		# Register : PCFGWQOS0_4 @ 0XFD07075C

+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		# VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		# PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1                                           0x1
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		# VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		# PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0                                           0x0
+
+		# Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		# rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		# s to higher port priority.
+		# PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL                                             0x3
+
+		# Port n Write QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD07075C, 0x0033000FU ,0x00100003U)  */
+    mask_write 0XFD07075C 0x0033000F 0x00100003
+		# Register : PCFGWQOS1_4 @ 0XFD070760

+
+		# Specifies the timeout value for write transactions.
+		# PSU_DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT                                           0x4f
+
+		# Port n Write QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070760, 0x000007FFU ,0x0000004FU)  */
+    mask_write 0XFD070760 0x000007FF 0x0000004F
+		# Register : PCFGR_5 @ 0XFD070774

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		# If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		# o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		# ess handshaking (it is not associated with any particular command).
+		# PSU_DDRC_PCFGR_5_RD_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the read channel of the port.
+		# PSU_DDRC_PCFGR_5_RD_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		# ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		# he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		# will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		# ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		# aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		# ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		# ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		# RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		# he two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGR_5_RD_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Read Register
+		#(OFFSET, MASK, VALUE)      (0XFD070774, 0x000073FFU ,0x0000200FU)  */
+    mask_write 0XFD070774 0x000073FF 0x0000200F
+		# Register : PCFGW_5 @ 0XFD070778

+
+		# If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		# d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		# imit register.
+		# PSU_DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		# If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		#  becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		#  Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		# not associated with any particular command).
+		# PSU_DDRC_PCFGW_5_WR_PORT_URGENT_EN                                              0x1
+
+		# If set to 1, enables aging function for the write channel of the port.
+		# PSU_DDRC_PCFGW_5_WR_PORT_AGING_EN                                               0x0
+
+		# Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		# rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		# The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		# s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		#  the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		#  be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		# ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		# ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		# PSU_DDRC_PCFGW_5_WR_PORT_PRIORITY                                               0xf
+
+		# Port n Configuration Write Register
+		#(OFFSET, MASK, VALUE)      (0XFD070778, 0x000073FFU ,0x0000600FU)  */
+    mask_write 0XFD070778 0x000073FF 0x0000600F
+		# Register : PCTRL_5 @ 0XFD070800

+
+		# Enables port n.
+		# PSU_DDRC_PCTRL_5_PORT_EN                                                        0x1
+
+		# Port n Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD070800, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD070800 0x00000001 0x00000001
+		# Register : PCFGQOS0_5 @ 0XFD070804

+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		# gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		# disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION1                                            0x1
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		# urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		#  disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		# PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION0                                            0x0
+
+		# Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		# al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		# ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		#  values.
+		# PSU_DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1                                             0x3
+
+		# Port n Read QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD070804, 0x0033000FU ,0x00100003U)  */
+    mask_write 0XFD070804 0x0033000F 0x00100003
+		# Register : PCFGQOS1_5 @ 0XFD070808

+
+		# Specifies the timeout value for transactions mapped to the red address queue.
+		# PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR                                           0x0
+
+		# Specifies the timeout value for transactions mapped to the blue address queue.
+		# PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		# Port n Read QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070808, 0x07FF07FFU ,0x0000004FU)  */
+    mask_write 0XFD070808 0x07FF07FF 0x0000004F
+		# Register : PCFGWQOS0_5 @ 0XFD07080C

+
+		# This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		# VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		# PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1                                           0x1
+
+		# This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		# VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		# PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0                                           0x0
+
+		# Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		# rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		# s to higher port priority.
+		# PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL                                             0x3
+
+		# Port n Write QoS Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD07080C, 0x0033000FU ,0x00100003U)  */
+    mask_write 0XFD07080C 0x0033000F 0x00100003
+		# Register : PCFGWQOS1_5 @ 0XFD070810

+
+		# Specifies the timeout value for write transactions.
+		# PSU_DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT                                           0x4f
+
+		# Port n Write QoS Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD070810, 0x000007FFU ,0x0000004FU)  */
+    mask_write 0XFD070810 0x000007FF 0x0000004F
+		# Register : SARBASE0 @ 0XFD070F04

+
+		# Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		#  by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
+		# PSU_DDRC_SARBASE0_BASE_ADDR                                                     0x0
+
+		# SAR Base Address Register n
+		#(OFFSET, MASK, VALUE)      (0XFD070F04, 0x000001FFU ,0x00000000U)  */
+    mask_write 0XFD070F04 0x000001FF 0x00000000
+		# Register : SARSIZE0 @ 0XFD070F08

+
+		# Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		# e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		# or example, if register is programmed to 0, region will have 1 block.
+		# PSU_DDRC_SARSIZE0_NBLOCKS                                                       0x0
+
+		# SAR Size Register n
+		#(OFFSET, MASK, VALUE)      (0XFD070F08, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD070F08 0x000000FF 0x00000000
+		# Register : SARBASE1 @ 0XFD070F0C

+
+		# Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		#  by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
+		# PSU_DDRC_SARBASE1_BASE_ADDR                                                     0x10
+
+		# SAR Base Address Register n
+		#(OFFSET, MASK, VALUE)      (0XFD070F0C, 0x000001FFU ,0x00000010U)  */
+    mask_write 0XFD070F0C 0x000001FF 0x00000010
+		# Register : SARSIZE1 @ 0XFD070F10

+
+		# Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		# e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		# or example, if register is programmed to 0, region will have 1 block.
+		# PSU_DDRC_SARSIZE1_NBLOCKS                                                       0xf
+
+		# SAR Size Register n
+		#(OFFSET, MASK, VALUE)      (0XFD070F10, 0x000000FFU ,0x0000000FU)  */
+    mask_write 0XFD070F10 0x000000FF 0x0000000F
+		# Register : DFITMG0_SHADOW @ 0XFD072190

+
+		# Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		# s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		# , this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		#  this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
+		# PSU_DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY                                        0x7
+
+		# Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		# 0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		# fer to PHY specification for correct value.
+		# PSU_DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR                                      0x1
+
+		# Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		# ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		# , it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		#  latency through the RDIMM. Unit: Clocks
+		# PSU_DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN                                         0x2
+
+		# Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		# .dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		# HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		# e.
+		# PSU_DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR                                      0x1
+
+		# Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		#  dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		# te, max supported value is 8. Unit: Clocks
+		# PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA                                         0x0
+
+		# Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		#  parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		#  necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		# rough the RDIMM.
+		# PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT                                          0x2
+
+		# DFI Timing Shadow Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD072190, 0x1FBFBF3FU ,0x07828002U)  */
+    mask_write 0XFD072190 0x1FBFBF3F 0x07828002
+		# : DDR CONTROLLER RESET
+		# Register : RST_DDR_SS @ 0XFD1A0108

+
+		# DDR block level reset inside of the DDR Sub System
+		# PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X0
+
+		# DDR sub system block level reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFD1A0108 0x00000008 0x00000000
+		# : DDR PHY
+		# Register : PGCR0 @ 0XFD080010

+
+		# Address Copy
+		# PSU_DDR_PHY_PGCR0_ADCP                                                          0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_PGCR0_RESERVED_30_27                                                0x0
+
+		# PHY FIFO Reset
+		# PSU_DDR_PHY_PGCR0_PHYFRST                                                       0x1
+
+		# Oscillator Mode Address/Command Delay Line Select
+		# PSU_DDR_PHY_PGCR0_OSCACDL                                                       0x3
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_PGCR0_RESERVED_23_19                                                0x0
+
+		# Digital Test Output Select
+		# PSU_DDR_PHY_PGCR0_DTOSEL                                                        0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_PGCR0_RESERVED_13                                                   0x0
+
+		# Oscillator Mode Division
+		# PSU_DDR_PHY_PGCR0_OSCDIV                                                        0xf
+
+		# Oscillator Enable
+		# PSU_DDR_PHY_PGCR0_OSCEN                                                         0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_PGCR0_RESERVED_7_0                                                  0x0
+
+		# PHY General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080010, 0xFFFFFFFFU ,0x07001E00U)  */
+    mask_write 0XFD080010 0xFFFFFFFF 0x07001E00
+		# Register : PGCR2 @ 0XFD080018

+
+		# Clear Training Status Registers
+		# PSU_DDR_PHY_PGCR2_CLRTSTAT                                                      0x0
+
+		# Clear Impedance Calibration
+		# PSU_DDR_PHY_PGCR2_CLRZCAL                                                       0x0
+
+		# Clear Parity Error
+		# PSU_DDR_PHY_PGCR2_CLRPERR                                                       0x0
+
+		# Initialization Complete Pin Configuration
+		# PSU_DDR_PHY_PGCR2_ICPC                                                          0x0
+
+		# Data Training PUB Mode Exit Timer
+		# PSU_DDR_PHY_PGCR2_DTPMXTMR                                                      0xf
+
+		# Initialization Bypass
+		# PSU_DDR_PHY_PGCR2_INITFSMBYP                                                    0x0
+
+		# PLL FSM Bypass
+		# PSU_DDR_PHY_PGCR2_PLLFSMBYP                                                     0x0
+
+		# Refresh Period
+		# PSU_DDR_PHY_PGCR2_TREFPRD                                                       0x12302
+
+		# PHY General Configuration Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080018, 0xFFFFFFFFU ,0x00F12302U)  */
+    mask_write 0XFD080018 0xFFFFFFFF 0x00F12302
+		# Register : PGCR5 @ 0XFD080024

+
+		# Frequency B Ratio Term
+		# PSU_DDR_PHY_PGCR5_FRQBT                                                         0x1
+
+		# Frequency A Ratio Term
+		# PSU_DDR_PHY_PGCR5_FRQAT                                                         0x1
+
+		# DFI Disconnect Time Period
+		# PSU_DDR_PHY_PGCR5_DISCNPERIOD                                                   0x0
+
+		# Receiver bias core side control
+		# PSU_DDR_PHY_PGCR5_VREF_RBCTRL                                                   0xf
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_PGCR5_RESERVED_3                                                    0x0
+
+		# Internal VREF generator REFSEL ragne select
+		# PSU_DDR_PHY_PGCR5_DXREFISELRANGE                                                0x1
+
+		# DDL Page Read Write select
+		# PSU_DDR_PHY_PGCR5_DDLPGACT                                                      0x0
+
+		# DDL Page Read Write select
+		# PSU_DDR_PHY_PGCR5_DDLPGRW                                                       0x0
+
+		# PHY General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080024, 0xFFFFFFFFU ,0x010100F4U)  */
+    mask_write 0XFD080024 0xFFFFFFFF 0x010100F4
+		# Register : PTR0 @ 0XFD080040

+
+		# PLL Power-Down Time
+		# PSU_DDR_PHY_PTR0_TPLLPD                                                         0x2f0
+
+		# PLL Gear Shift Time
+		# PSU_DDR_PHY_PTR0_TPLLGS                                                         0x60
+
+		# PHY Reset Time
+		# PSU_DDR_PHY_PTR0_TPHYRST                                                        0x10
+
+		# PHY Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080040, 0xFFFFFFFFU ,0x5E001810U)  */
+    mask_write 0XFD080040 0xFFFFFFFF 0x5E001810
+		# Register : PTR1 @ 0XFD080044

+
+		# PLL Lock Time
+		# PSU_DDR_PHY_PTR1_TPLLLOCK                                                       0x80
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_PTR1_RESERVED_15_13                                                 0x0
+
+		# PLL Reset Time
+		# PSU_DDR_PHY_PTR1_TPLLRST                                                        0x5f0
+
+		# PHY Timing Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080044, 0xFFFFFFFFU ,0x008005F0U)  */
+    mask_write 0XFD080044 0xFFFFFFFF 0x008005F0
+		# Register : DSGCR @ 0XFD080090

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DSGCR_RESERVED_31_28                                                0x0
+
+		# When RDBI enabled, this bit is used to select RDBI CL calculation, if it is 1b1, calculation will use RDBICL, otherwise use d
+		# fault calculation.
+		# PSU_DDR_PHY_DSGCR_RDBICLSEL                                                     0x0
+
+		# When RDBI enabled, if RDBICLSEL is asserted, RDBI CL adjust using this value.
+		# PSU_DDR_PHY_DSGCR_RDBICL                                                        0x2
+
+		# PHY Impedance Update Enable
+		# PSU_DDR_PHY_DSGCR_PHYZUEN                                                       0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DSGCR_RESERVED_22                                                   0x0
+
+		# SDRAM Reset Output Enable
+		# PSU_DDR_PHY_DSGCR_RSTOE                                                         0x1
+
+		# Single Data Rate Mode
+		# PSU_DDR_PHY_DSGCR_SDRMODE                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DSGCR_RESERVED_18                                                   0x0
+
+		# ATO Analog Test Enable
+		# PSU_DDR_PHY_DSGCR_ATOAE                                                         0x0
+
+		# DTO Output Enable
+		# PSU_DDR_PHY_DSGCR_DTOOE                                                         0x0
+
+		# DTO I/O Mode
+		# PSU_DDR_PHY_DSGCR_DTOIOM                                                        0x0
+
+		# DTO Power Down Receiver
+		# PSU_DDR_PHY_DSGCR_DTOPDR                                                        0x1
+
+		# Reserved. Return zeroes on reads
+		# PSU_DDR_PHY_DSGCR_RESERVED_13                                                   0x0
+
+		# DTO On-Die Termination
+		# PSU_DDR_PHY_DSGCR_DTOODT                                                        0x0
+
+		# PHY Update Acknowledge Delay
+		# PSU_DDR_PHY_DSGCR_PUAD                                                          0x4
+
+		# Controller Update Acknowledge Enable
+		# PSU_DDR_PHY_DSGCR_CUAEN                                                         0x1
+
+		# Reserved. Return zeroes on reads
+		# PSU_DDR_PHY_DSGCR_RESERVED_4_3                                                  0x0
+
+		# Controller Impedance Update Enable
+		# PSU_DDR_PHY_DSGCR_CTLZUEN                                                       0x0
+
+		# Reserved. Return zeroes on reads
+		# PSU_DDR_PHY_DSGCR_RESERVED_1                                                    0x0
+
+		# PHY Update Request Enable
+		# PSU_DDR_PHY_DSGCR_PUREN                                                         0x1
+
+		# DDR System General Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD080090, 0xFFFFFFFFU ,0x02A04121U)  */
+    mask_write 0XFD080090 0xFFFFFFFF 0x02A04121
+		# Register : DCR @ 0XFD080100

+
+		# DDR4 Gear Down Timing.
+		# PSU_DDR_PHY_DCR_GEARDN                                                          0x0
+
+		# Un-used Bank Group
+		# PSU_DDR_PHY_DCR_UBG                                                             0x0
+
+		# Un-buffered DIMM Address Mirroring
+		# PSU_DDR_PHY_DCR_UDIMM                                                           0x0
+
+		# DDR 2T Timing
+		# PSU_DDR_PHY_DCR_DDR2T                                                           0x0
+
+		# No Simultaneous Rank Access
+		# PSU_DDR_PHY_DCR_NOSRA                                                           0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DCR_RESERVED_26_18                                                  0x0
+
+		# Byte Mask
+		# PSU_DDR_PHY_DCR_BYTEMASK                                                        0x1
+
+		# DDR Type
+		# PSU_DDR_PHY_DCR_DDRTYPE                                                         0x0
+
+		# Multi-Purpose Register (MPR) DQ (DDR3 Only)
+		# PSU_DDR_PHY_DCR_MPRDQ                                                           0x0
+
+		# Primary DQ (DDR3 Only)
+		# PSU_DDR_PHY_DCR_PDQ                                                             0x0
+
+		# DDR 8-Bank
+		# PSU_DDR_PHY_DCR_DDR8BNK                                                         0x1
+
+		# DDR Mode
+		# PSU_DDR_PHY_DCR_DDRMD                                                           0x4
+
+		# DRAM Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD080100, 0xFFFFFFFFU ,0x0800040CU)  */
+    mask_write 0XFD080100 0xFFFFFFFF 0x0800040C
+		# Register : DTPR0 @ 0XFD080110

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR0_RESERVED_31_29                                                0x0
+
+		# Activate to activate command delay (different banks)
+		# PSU_DDR_PHY_DTPR0_TRRD                                                          0x6
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR0_RESERVED_23                                                   0x0
+
+		# Activate to precharge command delay
+		# PSU_DDR_PHY_DTPR0_TRAS                                                          0x24
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR0_RESERVED_15                                                   0x0
+
+		# Precharge command period
+		# PSU_DDR_PHY_DTPR0_TRP                                                           0x12
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR0_RESERVED_7_5                                                  0x0
+
+		# Internal read to precharge command delay
+		# PSU_DDR_PHY_DTPR0_TRTP                                                          0x8
+
+		# DRAM Timing Parameters Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080110, 0xFFFFFFFFU ,0x06241208U)  */
+    mask_write 0XFD080110 0xFFFFFFFF 0x06241208
+		# Register : DTPR1 @ 0XFD080114

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR1_RESERVED_31                                                   0x0
+
+		# Minimum delay from when write leveling mode is programmed to the first DQS/DQS# rising edge.
+		# PSU_DDR_PHY_DTPR1_TWLMRD                                                        0x28
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR1_RESERVED_23                                                   0x0
+
+		# 4-bank activate period
+		# PSU_DDR_PHY_DTPR1_TFAW                                                          0x18
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR1_RESERVED_15_11                                                0x0
+
+		# Load mode update delay (DDR4 and DDR3 only)
+		# PSU_DDR_PHY_DTPR1_TMOD                                                          0x7
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR1_RESERVED_7_5                                                  0x0
+
+		# Load mode cycle time
+		# PSU_DDR_PHY_DTPR1_TMRD                                                          0x8
+
+		# DRAM Timing Parameters Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080114, 0xFFFFFFFFU ,0x28180708U)  */
+    mask_write 0XFD080114 0xFFFFFFFF 0x28180708
+		# Register : DTPR2 @ 0XFD080118

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR2_RESERVED_31_29                                                0x0
+
+		# Read to Write command delay. Valid values are
+		# PSU_DDR_PHY_DTPR2_TRTW                                                          0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR2_RESERVED_27_25                                                0x0
+
+		# Read to ODT delay (DDR3 only)
+		# PSU_DDR_PHY_DTPR2_TRTODT                                                        0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR2_RESERVED_23_20                                                0x0
+
+		# CKE minimum pulse width
+		# PSU_DDR_PHY_DTPR2_TCKE                                                          0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR2_RESERVED_15_10                                                0x0
+
+		# Self refresh exit delay
+		# PSU_DDR_PHY_DTPR2_TXS                                                           0x200
+
+		# DRAM Timing Parameters Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080118, 0xFFFFFFFFU ,0x00080200U)  */
+    mask_write 0XFD080118 0xFFFFFFFF 0x00080200
+		# Register : DTPR3 @ 0XFD08011C

+
+		# ODT turn-off delay extension
+		# PSU_DDR_PHY_DTPR3_TOFDX                                                         0x4
+
+		# Read to read and write to write command delay
+		# PSU_DDR_PHY_DTPR3_TCCD                                                          0x0
+
+		# DLL locking time
+		# PSU_DDR_PHY_DTPR3_TDLLK                                                         0x300
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR3_RESERVED_15_12                                                0x0
+
+		# Maximum DQS output access time from CK/CK# (LPDDR2/3 only)
+		# PSU_DDR_PHY_DTPR3_TDQSCKMAX                                                     0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR3_RESERVED_7_3                                                  0x0
+
+		# DQS output access time from CK/CK# (LPDDR2/3 only)
+		# PSU_DDR_PHY_DTPR3_TDQSCK                                                        0x4
+
+		# DRAM Timing Parameters Register 3
+		#(OFFSET, MASK, VALUE)      (0XFD08011C, 0xFFFFFFFFU ,0x83000804U)  */
+    mask_write 0XFD08011C 0xFFFFFFFF 0x83000804
+		# Register : DTPR4 @ 0XFD080120

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR4_RESERVED_31_30                                                0x0
+
+		# ODT turn-on/turn-off delays (DDR2 only)
+		# PSU_DDR_PHY_DTPR4_TAOND_TAOFD                                                   0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR4_RESERVED_27_26                                                0x0
+
+		# Refresh-to-Refresh
+		# PSU_DDR_PHY_DTPR4_TRFC                                                          0x116
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR4_RESERVED_15_14                                                0x0
+
+		# Write leveling output delay
+		# PSU_DDR_PHY_DTPR4_TWLO                                                          0x2b
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR4_RESERVED_7_5                                                  0x0
+
+		# Power down exit delay
+		# PSU_DDR_PHY_DTPR4_TXP                                                           0x8
+
+		# DRAM Timing Parameters Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080120, 0xFFFFFFFFU ,0x01162B08U)  */
+    mask_write 0XFD080120 0xFFFFFFFF 0x01162B08
+		# Register : DTPR5 @ 0XFD080124

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR5_RESERVED_31_24                                                0x0
+
+		# Activate to activate command delay (same bank)
+		# PSU_DDR_PHY_DTPR5_TRC                                                           0x32
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR5_RESERVED_15                                                   0x0
+
+		# Activate to read or write delay
+		# PSU_DDR_PHY_DTPR5_TRCD                                                          0xf
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR5_RESERVED_7_5                                                  0x0
+
+		# Internal write to read command delay
+		# PSU_DDR_PHY_DTPR5_TWTR                                                          0x9
+
+		# DRAM Timing Parameters Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080124, 0xFFFFFFFFU ,0x00320F09U)  */
+    mask_write 0XFD080124 0xFFFFFFFF 0x00320F09
+		# Register : DTPR6 @ 0XFD080128

+
+		# PUB Write Latency Enable
+		# PSU_DDR_PHY_DTPR6_PUBWLEN                                                       0x0
+
+		# PUB Read Latency Enable
+		# PSU_DDR_PHY_DTPR6_PUBRLEN                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR6_RESERVED_29_14                                                0x0
+
+		# Write Latency
+		# PSU_DDR_PHY_DTPR6_PUBWL                                                         0xe
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTPR6_RESERVED_7_6                                                  0x0
+
+		# Read Latency
+		# PSU_DDR_PHY_DTPR6_PUBRL                                                         0xf
+
+		# DRAM Timing Parameters Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080128, 0xFFFFFFFFU ,0x00000E0FU)  */
+    mask_write 0XFD080128 0xFFFFFFFF 0x00000E0F
+		# Register : RDIMMGCR0 @ 0XFD080140

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR0_RESERVED_31                                               0x0
+
+		# RDMIMM Quad CS Enable
+		# PSU_DDR_PHY_RDIMMGCR0_QCSEN                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR0_RESERVED_29_28                                            0x0
+
+		# RDIMM Outputs I/O Mode
+		# PSU_DDR_PHY_RDIMMGCR0_RDIMMIOM                                                  0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR0_RESERVED_26_24                                            0x0
+
+		# ERROUT# Output Enable
+		# PSU_DDR_PHY_RDIMMGCR0_ERROUTOE                                                  0x0
+
+		# ERROUT# I/O Mode
+		# PSU_DDR_PHY_RDIMMGCR0_ERROUTIOM                                                 0x1
+
+		# ERROUT# Power Down Receiver
+		# PSU_DDR_PHY_RDIMMGCR0_ERROUTPDR                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR0_RESERVED_20                                               0x0
+
+		# ERROUT# On-Die Termination
+		# PSU_DDR_PHY_RDIMMGCR0_ERROUTODT                                                 0x0
+
+		# Load Reduced DIMM
+		# PSU_DDR_PHY_RDIMMGCR0_LRDIMM                                                    0x0
+
+		# PAR_IN I/O Mode
+		# PSU_DDR_PHY_RDIMMGCR0_PARINIOM                                                  0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR0_RESERVED_16_8                                             0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD                                             0x0
+
+		# Rank Mirror Enable.
+		# PSU_DDR_PHY_RDIMMGCR0_RNKMRREN                                                  0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR0_RESERVED_3                                                0x0
+
+		# Stop on Parity Error
+		# PSU_DDR_PHY_RDIMMGCR0_SOPERR                                                    0x0
+
+		# Parity Error No Registering
+		# PSU_DDR_PHY_RDIMMGCR0_ERRNOREG                                                  0x0
+
+		# Registered DIMM
+		# PSU_DDR_PHY_RDIMMGCR0_RDIMM                                                     0x0
+
+		# RDIMM General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080140, 0xFFFFFFFFU ,0x08400020U)  */
+    mask_write 0XFD080140 0xFFFFFFFF 0x08400020
+		# Register : RDIMMGCR1 @ 0XFD080144

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR1_RESERVED_31_29                                            0x0
+
+		# Address [17] B-side Inversion Disable
+		# PSU_DDR_PHY_RDIMMGCR1_A17BID                                                    0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR1_RESERVED_27                                               0x0
+
+		# Command word to command word programming delay
+		# PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L2                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR1_RESERVED_23                                               0x0
+
+		# Command word to command word programming delay
+		# PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L                                                  0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR1_RESERVED_19                                               0x0
+
+		# Command word to command word programming delay
+		# PSU_DDR_PHY_RDIMMGCR1_TBCMRD                                                    0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RDIMMGCR1_RESERVED_15_14                                            0x0
+
+		# Stabilization time
+		# PSU_DDR_PHY_RDIMMGCR1_TBCSTAB                                                   0xc80
+
+		# RDIMM General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080144, 0xFFFFFFFFU ,0x00000C80U)  */
+    mask_write 0XFD080144 0xFFFFFFFF 0x00000C80
+		# Register : RDIMMCR1 @ 0XFD080154

+
+		# Control Word 15
+		# PSU_DDR_PHY_RDIMMCR1_RC15                                                       0x0
+
+		# DDR4 Control Word 14 (Parity Control Word) / DDR3 Reserved
+		# PSU_DDR_PHY_RDIMMCR1_RC14                                                       0x0
+
+		# DDR4 Control Word 13 (DIMM Configuration Control Word) / DDR3 Reserved
+		# PSU_DDR_PHY_RDIMMCR1_RC13                                                       0x0
+
+		# DDR4 Control Word 12 (Training Control Word) / DDR3 Reserved
+		# PSU_DDR_PHY_RDIMMCR1_RC12                                                       0x0
+
+		# DDR4 Control Word 11 (Operating Voltage VDD and VREFCA Source Control Word) / DDR3 Control Word 11 (Operation Voltage VDD Con
+		# rol Word)
+		# PSU_DDR_PHY_RDIMMCR1_RC11                                                       0x0
+
+		# DDR4/DDR3 Control Word 10 (RDIMM Operating Speed Control Word)
+		# PSU_DDR_PHY_RDIMMCR1_RC10                                                       0x2
+
+		# DDR4/DDR3 Control Word 9 (Power Saving Settings Control Word)
+		# PSU_DDR_PHY_RDIMMCR1_RC9                                                        0x0
+
+		# DDR4 Control Word 8 (Input/Output Configuration Control Word) / DDR3 Control Word 8 (Additional Input Bus Termination Setting
+		# Control Word)
+		# PSU_DDR_PHY_RDIMMCR1_RC8                                                        0x0
+
+		# RDIMM Control Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080154, 0xFFFFFFFFU ,0x00000200U)  */
+    mask_write 0XFD080154 0xFFFFFFFF 0x00000200
+		# Register : MR0 @ 0XFD080180

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR0_RESERVED_31_8                                                   0x8
+
+		# CA Terminating Rank
+		# PSU_DDR_PHY_MR0_CATR                                                            0x0
+
+		# Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR0_RSVD_6_5                                                        0x1
+
+		# Built-in Self-Test for RZQ
+		# PSU_DDR_PHY_MR0_RZQI                                                            0x2
+
+		# Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR0_RSVD_2_0                                                        0x0
+
+		# LPDDR4 Mode Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080180, 0xFFFFFFFFU ,0x00000830U)  */
+    mask_write 0XFD080180 0xFFFFFFFF 0x00000830
+		# Register : MR1 @ 0XFD080184

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR1_RESERVED_31_8                                                   0x3
+
+		# Read Postamble Length
+		# PSU_DDR_PHY_MR1_RDPST                                                           0x0
+
+		# Write-recovery for auto-precharge command
+		# PSU_DDR_PHY_MR1_NWR                                                             0x0
+
+		# Read Preamble Length
+		# PSU_DDR_PHY_MR1_RDPRE                                                           0x0
+
+		# Write Preamble Length
+		# PSU_DDR_PHY_MR1_WRPRE                                                           0x0
+
+		# Burst Length
+		# PSU_DDR_PHY_MR1_BL                                                              0x1
+
+		# LPDDR4 Mode Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080184, 0xFFFFFFFFU ,0x00000301U)  */
+    mask_write 0XFD080184 0xFFFFFFFF 0x00000301
+		# Register : MR2 @ 0XFD080188

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR2_RESERVED_31_8                                                   0x0
+
+		# Write Leveling
+		# PSU_DDR_PHY_MR2_WRL                                                             0x0
+
+		# Write Latency Set
+		# PSU_DDR_PHY_MR2_WLS                                                             0x0
+
+		# Write Latency
+		# PSU_DDR_PHY_MR2_WL                                                              0x4
+
+		# Read Latency
+		# PSU_DDR_PHY_MR2_RL                                                              0x0
+
+		# LPDDR4 Mode Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080188, 0xFFFFFFFFU ,0x00000020U)  */
+    mask_write 0XFD080188 0xFFFFFFFF 0x00000020
+		# Register : MR3 @ 0XFD08018C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR3_RESERVED_31_8                                                   0x2
+
+		# DBI-Write Enable
+		# PSU_DDR_PHY_MR3_DBIWR                                                           0x0
+
+		# DBI-Read Enable
+		# PSU_DDR_PHY_MR3_DBIRD                                                           0x0
+
+		# Pull-down Drive Strength
+		# PSU_DDR_PHY_MR3_PDDS                                                            0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR3_RSVD                                                            0x0
+
+		# Write Postamble Length
+		# PSU_DDR_PHY_MR3_WRPST                                                           0x0
+
+		# Pull-up Calibration Point
+		# PSU_DDR_PHY_MR3_PUCAL                                                           0x0
+
+		# LPDDR4 Mode Register 3
+		#(OFFSET, MASK, VALUE)      (0XFD08018C, 0xFFFFFFFFU ,0x00000200U)  */
+    mask_write 0XFD08018C 0xFFFFFFFF 0x00000200
+		# Register : MR4 @ 0XFD080190

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR4_RESERVED_31_16                                                  0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR4_RSVD_15_13                                                      0x0
+
+		# Write Preamble
+		# PSU_DDR_PHY_MR4_WRP                                                             0x0
+
+		# Read Preamble
+		# PSU_DDR_PHY_MR4_RDP                                                             0x0
+
+		# Read Preamble Training Mode
+		# PSU_DDR_PHY_MR4_RPTM                                                            0x0
+
+		# Self Refresh Abort
+		# PSU_DDR_PHY_MR4_SRA                                                             0x0
+
+		# CS to Command Latency Mode
+		# PSU_DDR_PHY_MR4_CS2CMDL                                                         0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR4_RSVD1                                                           0x0
+
+		# Internal VREF Monitor
+		# PSU_DDR_PHY_MR4_IVM                                                             0x0
+
+		# Temperature Controlled Refresh Mode
+		# PSU_DDR_PHY_MR4_TCRM                                                            0x0
+
+		# Temperature Controlled Refresh Range
+		# PSU_DDR_PHY_MR4_TCRR                                                            0x0
+
+		# Maximum Power Down Mode
+		# PSU_DDR_PHY_MR4_MPDM                                                            0x0
+
+		# This is a JEDEC reserved bit and is recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR4_RSVD_0                                                          0x0
+
+		# DDR4 Mode Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080190, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080190 0xFFFFFFFF 0x00000000
+		# Register : MR5 @ 0XFD080194

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR5_RESERVED_31_16                                                  0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR5_RSVD                                                            0x0
+
+		# Read DBI
+		# PSU_DDR_PHY_MR5_RDBI                                                            0x0
+
+		# Write DBI
+		# PSU_DDR_PHY_MR5_WDBI                                                            0x0
+
+		# Data Mask
+		# PSU_DDR_PHY_MR5_DM                                                              0x1
+
+		# CA Parity Persistent Error
+		# PSU_DDR_PHY_MR5_CAPPE                                                           0x1
+
+		# RTT_PARK
+		# PSU_DDR_PHY_MR5_RTTPARK                                                         0x3
+
+		# ODT Input Buffer during Power Down mode
+		# PSU_DDR_PHY_MR5_ODTIBPD                                                         0x0
+
+		# C/A Parity Error Status
+		# PSU_DDR_PHY_MR5_CAPES                                                           0x0
+
+		# CRC Error Clear
+		# PSU_DDR_PHY_MR5_CRCEC                                                           0x0
+
+		# C/A Parity Latency Mode
+		# PSU_DDR_PHY_MR5_CAPM                                                            0x0
+
+		# DDR4 Mode Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080194, 0xFFFFFFFFU ,0x000006C0U)  */
+    mask_write 0XFD080194 0xFFFFFFFF 0x000006C0
+		# Register : MR6 @ 0XFD080198

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR6_RESERVED_31_16                                                  0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR6_RSVD_15_13                                                      0x0
+
+		# CAS_n to CAS_n command delay for same bank group (tCCD_L)
+		# PSU_DDR_PHY_MR6_TCCDL                                                           0x2
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR6_RSVD_9_8                                                        0x0
+
+		# VrefDQ Training Enable
+		# PSU_DDR_PHY_MR6_VDDQTEN                                                         0x0
+
+		# VrefDQ Training Range
+		# PSU_DDR_PHY_MR6_VDQTRG                                                          0x0
+
+		# VrefDQ Training Values
+		# PSU_DDR_PHY_MR6_VDQTVAL                                                         0x19
+
+		# DDR4 Mode Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080198, 0xFFFFFFFFU ,0x00000819U)  */
+    mask_write 0XFD080198 0xFFFFFFFF 0x00000819
+		# Register : MR11 @ 0XFD0801AC

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR11_RESERVED_31_8                                                  0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR11_RSVD                                                           0x0
+
+		# Power Down Control
+		# PSU_DDR_PHY_MR11_PDCTL                                                          0x0
+
+		# DQ Bus Receiver On-Die-Termination
+		# PSU_DDR_PHY_MR11_DQODT                                                          0x0
+
+		# LPDDR4 Mode Register 11
+		#(OFFSET, MASK, VALUE)      (0XFD0801AC, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD0801AC 0xFFFFFFFF 0x00000000
+		# Register : MR12 @ 0XFD0801B0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR12_RESERVED_31_8                                                  0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR12_RSVD                                                           0x0
+
+		# VREF_CA Range Select.
+		# PSU_DDR_PHY_MR12_VR_CA                                                          0x1
+
+		# Controls the VREF(ca) levels for Frequency-Set-Point[1:0].
+		# PSU_DDR_PHY_MR12_VREF_CA                                                        0xd
+
+		# LPDDR4 Mode Register 12
+		#(OFFSET, MASK, VALUE)      (0XFD0801B0, 0xFFFFFFFFU ,0x0000004DU)  */
+    mask_write 0XFD0801B0 0xFFFFFFFF 0x0000004D
+		# Register : MR13 @ 0XFD0801B4

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR13_RESERVED_31_8                                                  0x0
+
+		# Frequency Set Point Operation Mode
+		# PSU_DDR_PHY_MR13_FSPOP                                                          0x0
+
+		# Frequency Set Point Write Enable
+		# PSU_DDR_PHY_MR13_FSPWR                                                          0x0
+
+		# Data Mask Enable
+		# PSU_DDR_PHY_MR13_DMD                                                            0x0
+
+		# Refresh Rate Option
+		# PSU_DDR_PHY_MR13_RRO                                                            0x0
+
+		# VREF Current Generator
+		# PSU_DDR_PHY_MR13_VRCG                                                           0x1
+
+		# VREF Output
+		# PSU_DDR_PHY_MR13_VRO                                                            0x0
+
+		# Read Preamble Training Mode
+		# PSU_DDR_PHY_MR13_RPT                                                            0x0
+
+		# Command Bus Training
+		# PSU_DDR_PHY_MR13_CBT                                                            0x0
+
+		# LPDDR4 Mode Register 13
+		#(OFFSET, MASK, VALUE)      (0XFD0801B4, 0xFFFFFFFFU ,0x00000008U)  */
+    mask_write 0XFD0801B4 0xFFFFFFFF 0x00000008
+		# Register : MR14 @ 0XFD0801B8

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR14_RESERVED_31_8                                                  0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR14_RSVD                                                           0x0
+
+		# VREFDQ Range Selects.
+		# PSU_DDR_PHY_MR14_VR_DQ                                                          0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR14_VREF_DQ                                                        0xd
+
+		# LPDDR4 Mode Register 14
+		#(OFFSET, MASK, VALUE)      (0XFD0801B8, 0xFFFFFFFFU ,0x0000004DU)  */
+    mask_write 0XFD0801B8 0xFFFFFFFF 0x0000004D
+		# Register : MR22 @ 0XFD0801D8

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_MR22_RESERVED_31_8                                                  0x0
+
+		# These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		# PSU_DDR_PHY_MR22_RSVD                                                           0x0
+
+		# CA ODT termination disable.
+		# PSU_DDR_PHY_MR22_ODTD_CA                                                        0x0
+
+		# ODT CS override.
+		# PSU_DDR_PHY_MR22_ODTE_CS                                                        0x0
+
+		# ODT CK override.
+		# PSU_DDR_PHY_MR22_ODTE_CK                                                        0x0
+
+		# Controller ODT value for VOH calibration.
+		# PSU_DDR_PHY_MR22_CODT                                                           0x0
+
+		# LPDDR4 Mode Register 22
+		#(OFFSET, MASK, VALUE)      (0XFD0801D8, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD0801D8 0xFFFFFFFF 0x00000000
+		# Register : DTCR0 @ 0XFD080200

+
+		# Refresh During Training
+		# PSU_DDR_PHY_DTCR0_RFSHDT                                                        0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTCR0_RESERVED_27_26                                                0x0
+
+		# Data Training Debug Rank Select
+		# PSU_DDR_PHY_DTCR0_DTDRS                                                         0x1
+
+		# Data Training with Early/Extended Gate
+		# PSU_DDR_PHY_DTCR0_DTEXG                                                         0x0
+
+		# Data Training Extended Write DQS
+		# PSU_DDR_PHY_DTCR0_DTEXD                                                         0x0
+
+		# Data Training Debug Step
+		# PSU_DDR_PHY_DTCR0_DTDSTP                                                        0x0
+
+		# Data Training Debug Enable
+		# PSU_DDR_PHY_DTCR0_DTDEN                                                         0x0
+
+		# Data Training Debug Byte Select
+		# PSU_DDR_PHY_DTCR0_DTDBS                                                         0x0
+
+		# Data Training read DBI deskewing configuration
+		# PSU_DDR_PHY_DTCR0_DTRDBITR                                                      0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTCR0_RESERVED_13                                                   0x0
+
+		# Data Training Write Bit Deskew Data Mask
+		# PSU_DDR_PHY_DTCR0_DTWBDDM                                                       0x1
+
+		# Refreshes Issued During Entry to Training
+		# PSU_DDR_PHY_DTCR0_RFSHEN                                                        0x1
+
+		# Data Training Compare Data
+		# PSU_DDR_PHY_DTCR0_DTCMPD                                                        0x1
+
+		# Data Training Using MPR
+		# PSU_DDR_PHY_DTCR0_DTMPR                                                         0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTCR0_RESERVED_5_4                                                  0x0
+
+		# Data Training Repeat Number
+		# PSU_DDR_PHY_DTCR0_DTRPTN                                                        0x7
+
+		# Data Training Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080200, 0xFFFFFFFFU ,0x810011C7U)  */
+    mask_write 0XFD080200 0xFFFFFFFF 0x810011C7
+		# Register : DTCR1 @ 0XFD080204

+
+		# Rank Enable.
+		# PSU_DDR_PHY_DTCR1_RANKEN_RSVD                                                   0x0
+
+		# Rank Enable.
+		# PSU_DDR_PHY_DTCR1_RANKEN                                                        0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTCR1_RESERVED_15_14                                                0x0
+
+		# Data Training Rank
+		# PSU_DDR_PHY_DTCR1_DTRANK                                                        0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTCR1_RESERVED_11                                                   0x0
+
+		# Read Leveling Gate Sampling Difference
+		# PSU_DDR_PHY_DTCR1_RDLVLGDIFF                                                    0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTCR1_RESERVED_7                                                    0x0
+
+		# Read Leveling Gate Shift
+		# PSU_DDR_PHY_DTCR1_RDLVLGS                                                       0x3
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DTCR1_RESERVED_3                                                    0x0
+
+		# Read Preamble Training enable
+		# PSU_DDR_PHY_DTCR1_RDPRMVL_TRN                                                   0x1
+
+		# Read Leveling Enable
+		# PSU_DDR_PHY_DTCR1_RDLVLEN                                                       0x1
+
+		# Basic Gate Training Enable
+		# PSU_DDR_PHY_DTCR1_BSTEN                                                         0x0
+
+		# Data Training Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080204, 0xFFFFFFFFU ,0x00010236U)  */
+    mask_write 0XFD080204 0xFFFFFFFF 0x00010236
+		# Register : CATR0 @ 0XFD080240

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_CATR0_RESERVED_31_21                                                0x0
+
+		# Minimum time (in terms of number of dram clocks) between two consectuve CA calibration command
+		# PSU_DDR_PHY_CATR0_CACD                                                          0x14
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_CATR0_RESERVED_15_13                                                0x0
+
+		# Minimum time (in terms of number of dram clocks) PUB should wait before sampling the CA response after Calibration command ha
+		#  been sent to the memory
+		# PSU_DDR_PHY_CATR0_CAADR                                                         0x10
+
+		# CA_1 Response Byte Lane 1
+		# PSU_DDR_PHY_CATR0_CA1BYTE1                                                      0x5
+
+		# CA_1 Response Byte Lane 0
+		# PSU_DDR_PHY_CATR0_CA1BYTE0                                                      0x4
+
+		# CA Training Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080240, 0xFFFFFFFFU ,0x00141054U)  */
+    mask_write 0XFD080240 0xFFFFFFFF 0x00141054
+		# Register : RIOCR5 @ 0XFD0804F4

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_RIOCR5_RESERVED_31_16                                               0x0
+
+		# Reserved. Return zeros on reads.
+		# PSU_DDR_PHY_RIOCR5_ODTOEMODE_RSVD                                               0x0
+
+		# SDRAM On-die Termination Output Enable (OE) Mode Selection.
+		# PSU_DDR_PHY_RIOCR5_ODTOEMODE                                                    0x5
+
+		# Rank I/O Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD0804F4, 0xFFFFFFFFU ,0x00000005U)  */
+    mask_write 0XFD0804F4 0xFFFFFFFF 0x00000005
+		# Register : ACIOCR0 @ 0XFD080500

+
+		# Address/Command Slew Rate (D3F I/O Only)
+		# PSU_DDR_PHY_ACIOCR0_ACSR                                                        0x0
+
+		# SDRAM Reset I/O Mode
+		# PSU_DDR_PHY_ACIOCR0_RSTIOM                                                      0x1
+
+		# SDRAM Reset Power Down Receiver
+		# PSU_DDR_PHY_ACIOCR0_RSTPDR                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACIOCR0_RESERVED_27                                                 0x0
+
+		# SDRAM Reset On-Die Termination
+		# PSU_DDR_PHY_ACIOCR0_RSTODT                                                      0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACIOCR0_RESERVED_25_10                                              0x0
+
+		# CK Duty Cycle Correction
+		# PSU_DDR_PHY_ACIOCR0_CKDCC                                                       0x0
+
+		# AC Power Down Receiver Mode
+		# PSU_DDR_PHY_ACIOCR0_ACPDRMODE                                                   0x2
+
+		# AC On-die Termination Mode
+		# PSU_DDR_PHY_ACIOCR0_ACODTMODE                                                   0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACIOCR0_RESERVED_1                                                  0x0
+
+		# Control delayed or non-delayed clock to CS_N/ODT?CKE AC slices.
+		# PSU_DDR_PHY_ACIOCR0_ACRANKCLKSEL                                                0x0
+
+		# AC I/O Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080500, 0xFFFFFFFFU ,0x30000028U)  */
+    mask_write 0XFD080500 0xFFFFFFFF 0x30000028
+		# Register : ACIOCR2 @ 0XFD080508

+
+		# Clock gating for glue logic inside CLKGEN and glue logic inside CONTROL slice
+		# PSU_DDR_PHY_ACIOCR2_CLKGENCLKGATE                                               0x0
+
+		# Clock gating for Output Enable D slices [0]
+		# PSU_DDR_PHY_ACIOCR2_ACOECLKGATE0                                                0x0
+
+		# Clock gating for Power Down Receiver D slices [0]
+		# PSU_DDR_PHY_ACIOCR2_ACPDRCLKGATE0                                               0x0
+
+		# Clock gating for Termination Enable D slices [0]
+		# PSU_DDR_PHY_ACIOCR2_ACTECLKGATE0                                                0x0
+
+		# Clock gating for CK# D slices [1:0]
+		# PSU_DDR_PHY_ACIOCR2_CKNCLKGATE0                                                 0x2
+
+		# Clock gating for CK D slices [1:0]
+		# PSU_DDR_PHY_ACIOCR2_CKCLKGATE0                                                  0x2
+
+		# Clock gating for AC D slices [23:0]
+		# PSU_DDR_PHY_ACIOCR2_ACCLKGATE0                                                  0x0
+
+		# AC I/O Configuration Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080508, 0xFFFFFFFFU ,0x0A000000U)  */
+    mask_write 0XFD080508 0xFFFFFFFF 0x0A000000
+		# Register : ACIOCR3 @ 0XFD08050C

+
+		# SDRAM Parity Output Enable (OE) Mode Selection
+		# PSU_DDR_PHY_ACIOCR3_PAROEMODE                                                   0x0
+
+		# SDRAM Bank Group Output Enable (OE) Mode Selection
+		# PSU_DDR_PHY_ACIOCR3_BGOEMODE                                                    0x0
+
+		# SDRAM Bank Address Output Enable (OE) Mode Selection
+		# PSU_DDR_PHY_ACIOCR3_BAOEMODE                                                    0x0
+
+		# SDRAM A[17] Output Enable (OE) Mode Selection
+		# PSU_DDR_PHY_ACIOCR3_A17OEMODE                                                   0x0
+
+		# SDRAM A[16] / RAS_n Output Enable (OE) Mode Selection
+		# PSU_DDR_PHY_ACIOCR3_A16OEMODE                                                   0x0
+
+		# SDRAM ACT_n Output Enable (OE) Mode Selection (DDR4 only)
+		# PSU_DDR_PHY_ACIOCR3_ACTOEMODE                                                   0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACIOCR3_RESERVED_15_8                                               0x0
+
+		# Reserved. Return zeros on reads.
+		# PSU_DDR_PHY_ACIOCR3_CKOEMODE_RSVD                                               0x0
+
+		# SDRAM CK Output Enable (OE) Mode Selection.
+		# PSU_DDR_PHY_ACIOCR3_CKOEMODE                                                    0x9
+
+		# AC I/O Configuration Register 3
+		#(OFFSET, MASK, VALUE)      (0XFD08050C, 0xFFFFFFFFU ,0x00000009U)  */
+    mask_write 0XFD08050C 0xFFFFFFFF 0x00000009
+		# Register : ACIOCR4 @ 0XFD080510

+
+		# Clock gating for AC LB slices and loopback read valid slices
+		# PSU_DDR_PHY_ACIOCR4_LBCLKGATE                                                   0x0
+
+		# Clock gating for Output Enable D slices [1]
+		# PSU_DDR_PHY_ACIOCR4_ACOECLKGATE1                                                0x0
+
+		# Clock gating for Power Down Receiver D slices [1]
+		# PSU_DDR_PHY_ACIOCR4_ACPDRCLKGATE1                                               0x0
+
+		# Clock gating for Termination Enable D slices [1]
+		# PSU_DDR_PHY_ACIOCR4_ACTECLKGATE1                                                0x0
+
+		# Clock gating for CK# D slices [3:2]
+		# PSU_DDR_PHY_ACIOCR4_CKNCLKGATE1                                                 0x2
+
+		# Clock gating for CK D slices [3:2]
+		# PSU_DDR_PHY_ACIOCR4_CKCLKGATE1                                                  0x2
+
+		# Clock gating for AC D slices [47:24]
+		# PSU_DDR_PHY_ACIOCR4_ACCLKGATE1                                                  0x0
+
+		# AC I/O Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080510, 0xFFFFFFFFU ,0x0A000000U)  */
+    mask_write 0XFD080510 0xFFFFFFFF 0x0A000000
+		# Register : IOVCR0 @ 0XFD080520

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_IOVCR0_RESERVED_31_29                                               0x0
+
+		# Address/command lane VREF Pad Enable
+		# PSU_DDR_PHY_IOVCR0_ACREFPEN                                                     0x0
+
+		# Address/command lane Internal VREF Enable
+		# PSU_DDR_PHY_IOVCR0_ACREFEEN                                                     0x0
+
+		# Address/command lane Single-End VREF Enable
+		# PSU_DDR_PHY_IOVCR0_ACREFSEN                                                     0x1
+
+		# Address/command lane Internal VREF Enable
+		# PSU_DDR_PHY_IOVCR0_ACREFIEN                                                     0x1
+
+		# External VREF generato REFSEL range select
+		# PSU_DDR_PHY_IOVCR0_ACREFESELRANGE                                               0x0
+
+		# Address/command lane External VREF Select
+		# PSU_DDR_PHY_IOVCR0_ACREFESEL                                                    0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_IOVCR0_ACREFSSELRANGE                                               0x1
+
+		# Address/command lane Single-End VREF Select
+		# PSU_DDR_PHY_IOVCR0_ACREFSSEL                                                    0x30
+
+		# Internal VREF generator REFSEL ragne select
+		# PSU_DDR_PHY_IOVCR0_ACVREFISELRANGE                                              0x1
+
+		# REFSEL Control for internal AC IOs
+		# PSU_DDR_PHY_IOVCR0_ACVREFISEL                                                   0x30
+
+		# IO VREF Control Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080520, 0xFFFFFFFFU ,0x0300B0B0U)  */
+    mask_write 0XFD080520 0xFFFFFFFF 0x0300B0B0
+		# Register : VTCR0 @ 0XFD080528

+
+		# Number of ctl_clk required to meet (> 150ns) timing requirements during DRAM DQ VREF training
+		# PSU_DDR_PHY_VTCR0_TVREF                                                         0x7
+
+		# DRM DQ VREF training Enable
+		# PSU_DDR_PHY_VTCR0_DVEN                                                          0x1
+
+		# Per Device Addressability Enable
+		# PSU_DDR_PHY_VTCR0_PDAEN                                                         0x1
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_VTCR0_RESERVED_26                                                   0x0
+
+		# VREF Word Count
+		# PSU_DDR_PHY_VTCR0_VWCR                                                          0x4
+
+		# DRAM DQ VREF step size used during DRAM VREF training
+		# PSU_DDR_PHY_VTCR0_DVSS                                                          0x0
+
+		# Maximum VREF limit value used during DRAM VREF training
+		# PSU_DDR_PHY_VTCR0_DVMAX                                                         0x32
+
+		# Minimum VREF limit value used during DRAM VREF training
+		# PSU_DDR_PHY_VTCR0_DVMIN                                                         0x0
+
+		# Initial DRAM DQ VREF value used during DRAM VREF training
+		# PSU_DDR_PHY_VTCR0_DVINIT                                                        0x19
+
+		# VREF Training Control Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080528, 0xFFFFFFFFU ,0xF9032019U)  */
+    mask_write 0XFD080528 0xFFFFFFFF 0xF9032019
+		# Register : VTCR1 @ 0XFD08052C

+
+		# Host VREF step size used during VREF training. The register value of N indicates step size of (N+1)
+		# PSU_DDR_PHY_VTCR1_HVSS                                                          0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_VTCR1_RESERVED_27                                                   0x0
+
+		# Maximum VREF limit value used during DRAM VREF training.
+		# PSU_DDR_PHY_VTCR1_HVMAX                                                         0x7f
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_VTCR1_RESERVED_19                                                   0x0
+
+		# Minimum VREF limit value used during DRAM VREF training.
+		# PSU_DDR_PHY_VTCR1_HVMIN                                                         0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_VTCR1_RESERVED_11                                                   0x0
+
+		# Static Host Vref Rank Value
+		# PSU_DDR_PHY_VTCR1_SHRNK                                                         0x0
+
+		# Static Host Vref Rank Enable
+		# PSU_DDR_PHY_VTCR1_SHREN                                                         0x1
+
+		# Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training
+		# PSU_DDR_PHY_VTCR1_TVREFIO                                                       0x4
+
+		# Eye LCDL Offset value for VREF training
+		# PSU_DDR_PHY_VTCR1_EOFF                                                          0x1
+
+		# Number of LCDL Eye points for which VREF training is repeated
+		# PSU_DDR_PHY_VTCR1_ENUM                                                          0x1
+
+		# HOST (IO) internal VREF training Enable
+		# PSU_DDR_PHY_VTCR1_HVEN                                                          0x1
+
+		# Host IO Type Control
+		# PSU_DDR_PHY_VTCR1_HVIO                                                          0x1
+
+		# VREF Training Control Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD08052C, 0xFFFFFFFFU ,0x07F0018FU)  */
+    mask_write 0XFD08052C 0xFFFFFFFF 0x07F0018F
+		# Register : ACBDLR6 @ 0XFD080558

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR6_RESERVED_31_30                                              0x0
+
+		# Delay select for the BDL on Address A[3].
+		# PSU_DDR_PHY_ACBDLR6_A03BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR6_RESERVED_23_22                                              0x0
+
+		# Delay select for the BDL on Address A[2].
+		# PSU_DDR_PHY_ACBDLR6_A02BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR6_RESERVED_15_14                                              0x0
+
+		# Delay select for the BDL on Address A[1].
+		# PSU_DDR_PHY_ACBDLR6_A01BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR6_RESERVED_7_6                                                0x0
+
+		# Delay select for the BDL on Address A[0].
+		# PSU_DDR_PHY_ACBDLR6_A00BD                                                       0x0
+
+		# AC Bit Delay Line Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080558, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080558 0xFFFFFFFF 0x00000000
+		# Register : ACBDLR7 @ 0XFD08055C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR7_RESERVED_31_30                                              0x0
+
+		# Delay select for the BDL on Address A[7].
+		# PSU_DDR_PHY_ACBDLR7_A07BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR7_RESERVED_23_22                                              0x0
+
+		# Delay select for the BDL on Address A[6].
+		# PSU_DDR_PHY_ACBDLR7_A06BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR7_RESERVED_15_14                                              0x0
+
+		# Delay select for the BDL on Address A[5].
+		# PSU_DDR_PHY_ACBDLR7_A05BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR7_RESERVED_7_6                                                0x0
+
+		# Delay select for the BDL on Address A[4].
+		# PSU_DDR_PHY_ACBDLR7_A04BD                                                       0x0
+
+		# AC Bit Delay Line Register 7
+		#(OFFSET, MASK, VALUE)      (0XFD08055C, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD08055C 0xFFFFFFFF 0x00000000
+		# Register : ACBDLR8 @ 0XFD080560

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR8_RESERVED_31_30                                              0x0
+
+		# Delay select for the BDL on Address A[11].
+		# PSU_DDR_PHY_ACBDLR8_A11BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR8_RESERVED_23_22                                              0x0
+
+		# Delay select for the BDL on Address A[10].
+		# PSU_DDR_PHY_ACBDLR8_A10BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR8_RESERVED_15_14                                              0x0
+
+		# Delay select for the BDL on Address A[9].
+		# PSU_DDR_PHY_ACBDLR8_A09BD                                                       0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ACBDLR8_RESERVED_7_6                                                0x0
+
+		# Delay select for the BDL on Address A[8].
+		# PSU_DDR_PHY_ACBDLR8_A08BD                                                       0x0
+
+		# AC Bit Delay Line Register 8
+		#(OFFSET, MASK, VALUE)      (0XFD080560, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080560 0xFFFFFFFF 0x00000000
+		# Register : ZQCR @ 0XFD080680

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_ZQCR_RESERVED_31_26                                                 0x0
+
+		# ZQ VREF Range
+		# PSU_DDR_PHY_ZQCR_ZQREFISELRANGE                                                 0x0
+
+		# Programmable Wait for Frequency B
+		# PSU_DDR_PHY_ZQCR_PGWAIT_FRQB                                                    0x11
+
+		# Programmable Wait for Frequency A
+		# PSU_DDR_PHY_ZQCR_PGWAIT_FRQA                                                    0x11
+
+		# ZQ VREF Pad Enable
+		# PSU_DDR_PHY_ZQCR_ZQREFPEN                                                       0x0
+
+		# ZQ Internal VREF Enable
+		# PSU_DDR_PHY_ZQCR_ZQREFIEN                                                       0x1
+
+		# Choice of termination mode
+		# PSU_DDR_PHY_ZQCR_ODT_MODE                                                       0x1
+
+		# Force ZCAL VT update
+		# PSU_DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE                                           0x0
+
+		# IO VT Drift Limit
+		# PSU_DDR_PHY_ZQCR_IODLMT                                                         0x2
+
+		# Averaging algorithm enable, if set, enables averaging algorithm
+		# PSU_DDR_PHY_ZQCR_AVGEN                                                          0x1
+
+		# Maximum number of averaging rounds to be used by averaging algorithm
+		# PSU_DDR_PHY_ZQCR_AVGMAX                                                         0x2
+
+		# ZQ Calibration Type
+		# PSU_DDR_PHY_ZQCR_ZCALT                                                          0x0
+
+		# ZQ Power Down
+		# PSU_DDR_PHY_ZQCR_ZQPD                                                           0x0
+
+		# ZQ Impedance Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD080680, 0xFFFFFFFFU ,0x008A2A58U)  */
+    mask_write 0XFD080680 0xFFFFFFFF 0x008A2A58
+		# Register : ZQ0PR0 @ 0XFD080684

+
+		# Pull-down drive strength ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ0PR0_PD_DRV_ZDEN                                                  0x0
+
+		# Pull-up drive strength ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ0PR0_PU_DRV_ZDEN                                                  0x0
+
+		# Pull-down termination ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ0PR0_PD_ODT_ZDEN                                                  0x0
+
+		# Pull-up termination ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ0PR0_PU_ODT_ZDEN                                                  0x0
+
+		# Calibration segment bypass
+		# PSU_DDR_PHY_ZQ0PR0_ZSEGBYP                                                      0x0
+
+		# VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
+		# PSU_DDR_PHY_ZQ0PR0_ZLE_MODE                                                     0x0
+
+		# Termination adjustment
+		# PSU_DDR_PHY_ZQ0PR0_ODT_ADJUST                                                   0x0
+
+		# Pulldown drive strength adjustment
+		# PSU_DDR_PHY_ZQ0PR0_PD_DRV_ADJUST                                                0x0
+
+		# Pullup drive strength adjustment
+		# PSU_DDR_PHY_ZQ0PR0_PU_DRV_ADJUST                                                0x0
+
+		# DRAM Impedance Divide Ratio
+		# PSU_DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT                                               0x7
+
+		# HOST Impedance Divide Ratio
+		# PSU_DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT                                               0x7
+
+		# Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
+		# PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD                                            0xd
+
+		# Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
+		# PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU                                            0xd
+
+		# ZQ n Impedance Control Program Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080684, 0xFFFFFFFFU ,0x000077DDU)  */
+    mask_write 0XFD080684 0xFFFFFFFF 0x000077DD
+		# Register : ZQ0OR0 @ 0XFD080694

+
+		# Reserved. Return zeros on reads.
+		# PSU_DDR_PHY_ZQ0OR0_RESERVED_31_26                                               0x0
+
+		# Override value for the pull-up output impedance
+		# PSU_DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD                                            0x1e1
+
+		# Reserved. Return zeros on reads.
+		# PSU_DDR_PHY_ZQ0OR0_RESERVED_15_10                                               0x0
+
+		# Override value for the pull-down output impedance
+		# PSU_DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD                                            0x210
+
+		# ZQ n Impedance Control Override Data Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080694, 0xFFFFFFFFU ,0x01E10210U)  */
+    mask_write 0XFD080694 0xFFFFFFFF 0x01E10210
+		# Register : ZQ0OR1 @ 0XFD080698

+
+		# Reserved. Return zeros on reads.
+		# PSU_DDR_PHY_ZQ0OR1_RESERVED_31_26                                               0x0
+
+		# Override value for the pull-up termination
+		# PSU_DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD                                            0x1e1
+
+		# Reserved. Return zeros on reads.
+		# PSU_DDR_PHY_ZQ0OR1_RESERVED_15_10                                               0x0
+
+		# Override value for the pull-down termination
+		# PSU_DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD                                            0x0
+
+		# ZQ n Impedance Control Override Data Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080698, 0xFFFFFFFFU ,0x01E10000U)  */
+    mask_write 0XFD080698 0xFFFFFFFF 0x01E10000
+		# Register : ZQ1PR0 @ 0XFD0806A4

+
+		# Pull-down drive strength ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ1PR0_PD_DRV_ZDEN                                                  0x0
+
+		# Pull-up drive strength ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ1PR0_PU_DRV_ZDEN                                                  0x0
+
+		# Pull-down termination ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ1PR0_PD_ODT_ZDEN                                                  0x0
+
+		# Pull-up termination ZCTRL over-ride enable
+		# PSU_DDR_PHY_ZQ1PR0_PU_ODT_ZDEN                                                  0x0
+
+		# Calibration segment bypass
+		# PSU_DDR_PHY_ZQ1PR0_ZSEGBYP                                                      0x0
+
+		# VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
+		# PSU_DDR_PHY_ZQ1PR0_ZLE_MODE                                                     0x0
+
+		# Termination adjustment
+		# PSU_DDR_PHY_ZQ1PR0_ODT_ADJUST                                                   0x0
+
+		# Pulldown drive strength adjustment
+		# PSU_DDR_PHY_ZQ1PR0_PD_DRV_ADJUST                                                0x1
+
+		# Pullup drive strength adjustment
+		# PSU_DDR_PHY_ZQ1PR0_PU_DRV_ADJUST                                                0x0
+
+		# DRAM Impedance Divide Ratio
+		# PSU_DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT                                               0x7
+
+		# HOST Impedance Divide Ratio
+		# PSU_DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT                                               0xb
+
+		# Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
+		# PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD                                            0xd
+
+		# Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
+		# PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU                                            0xb
+
+		# ZQ n Impedance Control Program Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0806A4, 0xFFFFFFFFU ,0x00087BDBU)  */
+    mask_write 0XFD0806A4 0xFFFFFFFF 0x00087BDB
+		# Register : DX0GCR0 @ 0XFD080700

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX0GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX0GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX0GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX0GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX0GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX0GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX0GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX0GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX0GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX0GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX0GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX0GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX0GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX0GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080700, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080700 0xFFFFFFFF 0x40800604
+		# Register : DX0GCR4 @ 0XFD080710

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX0GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX0GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX0GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX0GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX0GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX0GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX0GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX0GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX0GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX0GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080710, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080710 0xFFFFFFFF 0x0E00B03C
+		# Register : DX0GCR5 @ 0XFD080714

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX0GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX0GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX0GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX0GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080714, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080714 0xFFFFFFFF 0x09095555
+		# Register : DX0GCR6 @ 0XFD080718

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX0GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX0GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX0GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX0GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX0GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080718, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080718 0xFFFFFFFF 0x09092B2B
+		# Register : DX0LCDLR2 @ 0XFD080788

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX0LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX0LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080788, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080788 0xFFFFFFFF 0x00000000
+		# Register : DX0GTR0 @ 0XFD0807C0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX0GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX0GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX0GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX0GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX0GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX0GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0807C0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD0807C0 0xFFFFFFFF 0x00020000
+		# Register : DX1GCR0 @ 0XFD080800

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX1GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX1GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX1GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX1GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX1GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX1GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX1GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX1GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX1GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX1GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX1GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX1GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX1GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX1GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080800, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080800 0xFFFFFFFF 0x40800604
+		# Register : DX1GCR4 @ 0XFD080810

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX1GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX1GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX1GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX1GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX1GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX1GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX1GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX1GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX1GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX1GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080810, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080810 0xFFFFFFFF 0x0E00B03C
+		# Register : DX1GCR5 @ 0XFD080814

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX1GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX1GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX1GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX1GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080814, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080814 0xFFFFFFFF 0x09095555
+		# Register : DX1GCR6 @ 0XFD080818

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX1GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX1GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX1GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX1GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX1GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080818, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080818 0xFFFFFFFF 0x09092B2B
+		# Register : DX1LCDLR2 @ 0XFD080888

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX1LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX1LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080888, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080888 0xFFFFFFFF 0x00000000
+		# Register : DX1GTR0 @ 0XFD0808C0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX1GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX1GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX1GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX1GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX1GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX1GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0808C0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD0808C0 0xFFFFFFFF 0x00020000
+		# Register : DX2GCR0 @ 0XFD080900

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX2GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX2GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX2GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX2GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX2GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX2GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX2GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX2GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX2GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX2GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX2GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX2GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX2GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX2GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080900, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080900 0xFFFFFFFF 0x40800604
+		# Register : DX2GCR1 @ 0XFD080904

+
+		# Enables the PDR mode for DQ[7:0]
+		# PSU_DDR_PHY_DX2GCR1_DXPDRMODE                                                   0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_DX2GCR1_RESERVED_15                                                 0x0
+
+		# Select the delayed or non-delayed read data strobe #
+		# PSU_DDR_PHY_DX2GCR1_QSNSEL                                                      0x1
+
+		# Select the delayed or non-delayed read data strobe
+		# PSU_DDR_PHY_DX2GCR1_QSSEL                                                       0x1
+
+		# Enables Read Data Strobe in a byte lane
+		# PSU_DDR_PHY_DX2GCR1_OEEN                                                        0x1
+
+		# Enables PDR in a byte lane
+		# PSU_DDR_PHY_DX2GCR1_PDREN                                                       0x1
+
+		# Enables ODT/TE in a byte lane
+		# PSU_DDR_PHY_DX2GCR1_TEEN                                                        0x1
+
+		# Enables Write Data strobe in a byte lane
+		# PSU_DDR_PHY_DX2GCR1_DSEN                                                        0x1
+
+		# Enables DM pin in a byte lane
+		# PSU_DDR_PHY_DX2GCR1_DMEN                                                        0x1
+
+		# Enables DQ corresponding to each bit in a byte
+		# PSU_DDR_PHY_DX2GCR1_DQEN                                                        0xff
+
+		# DATX8 n General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080904, 0xFFFFFFFFU ,0x00007FFFU)  */
+    mask_write 0XFD080904 0xFFFFFFFF 0x00007FFF
+		# Register : DX2GCR4 @ 0XFD080910

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX2GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX2GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX2GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX2GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX2GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX2GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX2GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX2GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX2GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX2GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080910, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080910 0xFFFFFFFF 0x0E00B03C
+		# Register : DX2GCR5 @ 0XFD080914

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX2GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX2GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX2GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX2GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080914, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080914 0xFFFFFFFF 0x09095555
+		# Register : DX2GCR6 @ 0XFD080918

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX2GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX2GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX2GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX2GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX2GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080918, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080918 0xFFFFFFFF 0x09092B2B
+		# Register : DX2LCDLR2 @ 0XFD080988

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX2LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX2LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080988, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080988 0xFFFFFFFF 0x00000000
+		# Register : DX2GTR0 @ 0XFD0809C0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX2GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX2GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX2GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX2GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX2GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX2GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD0809C0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD0809C0 0xFFFFFFFF 0x00020000
+		# Register : DX3GCR0 @ 0XFD080A00

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX3GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX3GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX3GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX3GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX3GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX3GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX3GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX3GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX3GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX3GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX3GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX3GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX3GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX3GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080A00, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080A00 0xFFFFFFFF 0x40800604
+		# Register : DX3GCR1 @ 0XFD080A04

+
+		# Enables the PDR mode for DQ[7:0]
+		# PSU_DDR_PHY_DX3GCR1_DXPDRMODE                                                   0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_DX3GCR1_RESERVED_15                                                 0x0
+
+		# Select the delayed or non-delayed read data strobe #
+		# PSU_DDR_PHY_DX3GCR1_QSNSEL                                                      0x1
+
+		# Select the delayed or non-delayed read data strobe
+		# PSU_DDR_PHY_DX3GCR1_QSSEL                                                       0x1
+
+		# Enables Read Data Strobe in a byte lane
+		# PSU_DDR_PHY_DX3GCR1_OEEN                                                        0x1
+
+		# Enables PDR in a byte lane
+		# PSU_DDR_PHY_DX3GCR1_PDREN                                                       0x1
+
+		# Enables ODT/TE in a byte lane
+		# PSU_DDR_PHY_DX3GCR1_TEEN                                                        0x1
+
+		# Enables Write Data strobe in a byte lane
+		# PSU_DDR_PHY_DX3GCR1_DSEN                                                        0x1
+
+		# Enables DM pin in a byte lane
+		# PSU_DDR_PHY_DX3GCR1_DMEN                                                        0x1
+
+		# Enables DQ corresponding to each bit in a byte
+		# PSU_DDR_PHY_DX3GCR1_DQEN                                                        0xff
+
+		# DATX8 n General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080A04, 0xFFFFFFFFU ,0x00007FFFU)  */
+    mask_write 0XFD080A04 0xFFFFFFFF 0x00007FFF
+		# Register : DX3GCR4 @ 0XFD080A10

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX3GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX3GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX3GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX3GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX3GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX3GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX3GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX3GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX3GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX3GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080A10, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080A10 0xFFFFFFFF 0x0E00B03C
+		# Register : DX3GCR5 @ 0XFD080A14

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX3GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX3GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX3GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX3GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080A14, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080A14 0xFFFFFFFF 0x09095555
+		# Register : DX3GCR6 @ 0XFD080A18

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX3GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX3GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX3GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX3GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX3GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080A18, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080A18 0xFFFFFFFF 0x09092B2B
+		# Register : DX3LCDLR2 @ 0XFD080A88

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX3LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX3LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080A88, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080A88 0xFFFFFFFF 0x00000000
+		# Register : DX3GTR0 @ 0XFD080AC0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX3GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX3GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX3GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX3GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX3GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX3GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080AC0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD080AC0 0xFFFFFFFF 0x00020000
+		# Register : DX4GCR0 @ 0XFD080B00

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX4GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX4GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX4GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX4GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX4GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX4GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX4GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX4GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX4GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX4GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX4GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX4GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX4GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX4GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080B00, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080B00 0xFFFFFFFF 0x40800604
+		# Register : DX4GCR1 @ 0XFD080B04

+
+		# Enables the PDR mode for DQ[7:0]
+		# PSU_DDR_PHY_DX4GCR1_DXPDRMODE                                                   0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_DX4GCR1_RESERVED_15                                                 0x0
+
+		# Select the delayed or non-delayed read data strobe #
+		# PSU_DDR_PHY_DX4GCR1_QSNSEL                                                      0x1
+
+		# Select the delayed or non-delayed read data strobe
+		# PSU_DDR_PHY_DX4GCR1_QSSEL                                                       0x1
+
+		# Enables Read Data Strobe in a byte lane
+		# PSU_DDR_PHY_DX4GCR1_OEEN                                                        0x1
+
+		# Enables PDR in a byte lane
+		# PSU_DDR_PHY_DX4GCR1_PDREN                                                       0x1
+
+		# Enables ODT/TE in a byte lane
+		# PSU_DDR_PHY_DX4GCR1_TEEN                                                        0x1
+
+		# Enables Write Data strobe in a byte lane
+		# PSU_DDR_PHY_DX4GCR1_DSEN                                                        0x1
+
+		# Enables DM pin in a byte lane
+		# PSU_DDR_PHY_DX4GCR1_DMEN                                                        0x1
+
+		# Enables DQ corresponding to each bit in a byte
+		# PSU_DDR_PHY_DX4GCR1_DQEN                                                        0xff
+
+		# DATX8 n General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080B04, 0xFFFFFFFFU ,0x00007FFFU)  */
+    mask_write 0XFD080B04 0xFFFFFFFF 0x00007FFF
+		# Register : DX4GCR4 @ 0XFD080B10

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX4GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX4GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX4GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX4GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX4GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX4GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX4GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX4GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX4GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX4GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080B10, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080B10 0xFFFFFFFF 0x0E00B03C
+		# Register : DX4GCR5 @ 0XFD080B14

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX4GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX4GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX4GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX4GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080B14, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080B14 0xFFFFFFFF 0x09095555
+		# Register : DX4GCR6 @ 0XFD080B18

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX4GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX4GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX4GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX4GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX4GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080B18, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080B18 0xFFFFFFFF 0x09092B2B
+		# Register : DX4LCDLR2 @ 0XFD080B88

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX4LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX4LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080B88, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080B88 0xFFFFFFFF 0x00000000
+		# Register : DX4GTR0 @ 0XFD080BC0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX4GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX4GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX4GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX4GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX4GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX4GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080BC0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD080BC0 0xFFFFFFFF 0x00020000
+		# Register : DX5GCR0 @ 0XFD080C00

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX5GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX5GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX5GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX5GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX5GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX5GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX5GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX5GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX5GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX5GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX5GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX5GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX5GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX5GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080C00, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080C00 0xFFFFFFFF 0x40800604
+		# Register : DX5GCR1 @ 0XFD080C04

+
+		# Enables the PDR mode for DQ[7:0]
+		# PSU_DDR_PHY_DX5GCR1_DXPDRMODE                                                   0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_DX5GCR1_RESERVED_15                                                 0x0
+
+		# Select the delayed or non-delayed read data strobe #
+		# PSU_DDR_PHY_DX5GCR1_QSNSEL                                                      0x1
+
+		# Select the delayed or non-delayed read data strobe
+		# PSU_DDR_PHY_DX5GCR1_QSSEL                                                       0x1
+
+		# Enables Read Data Strobe in a byte lane
+		# PSU_DDR_PHY_DX5GCR1_OEEN                                                        0x1
+
+		# Enables PDR in a byte lane
+		# PSU_DDR_PHY_DX5GCR1_PDREN                                                       0x1
+
+		# Enables ODT/TE in a byte lane
+		# PSU_DDR_PHY_DX5GCR1_TEEN                                                        0x1
+
+		# Enables Write Data strobe in a byte lane
+		# PSU_DDR_PHY_DX5GCR1_DSEN                                                        0x1
+
+		# Enables DM pin in a byte lane
+		# PSU_DDR_PHY_DX5GCR1_DMEN                                                        0x1
+
+		# Enables DQ corresponding to each bit in a byte
+		# PSU_DDR_PHY_DX5GCR1_DQEN                                                        0xff
+
+		# DATX8 n General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080C04, 0xFFFFFFFFU ,0x00007FFFU)  */
+    mask_write 0XFD080C04 0xFFFFFFFF 0x00007FFF
+		# Register : DX5GCR4 @ 0XFD080C10

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX5GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX5GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX5GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX5GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX5GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX5GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX5GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX5GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX5GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX5GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080C10, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080C10 0xFFFFFFFF 0x0E00B03C
+		# Register : DX5GCR5 @ 0XFD080C14

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX5GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX5GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX5GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX5GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080C14, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080C14 0xFFFFFFFF 0x09095555
+		# Register : DX5GCR6 @ 0XFD080C18

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX5GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX5GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX5GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX5GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX5GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080C18, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080C18 0xFFFFFFFF 0x09092B2B
+		# Register : DX5LCDLR2 @ 0XFD080C88

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX5LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX5LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080C88, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080C88 0xFFFFFFFF 0x00000000
+		# Register : DX5GTR0 @ 0XFD080CC0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX5GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX5GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX5GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX5GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX5GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX5GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080CC0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD080CC0 0xFFFFFFFF 0x00020000
+		# Register : DX6GCR0 @ 0XFD080D00

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX6GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX6GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX6GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX6GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX6GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX6GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX6GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX6GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX6GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX6GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX6GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX6GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX6GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX6GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080D00, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080D00 0xFFFFFFFF 0x40800604
+		# Register : DX6GCR1 @ 0XFD080D04

+
+		# Enables the PDR mode for DQ[7:0]
+		# PSU_DDR_PHY_DX6GCR1_DXPDRMODE                                                   0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_DX6GCR1_RESERVED_15                                                 0x0
+
+		# Select the delayed or non-delayed read data strobe #
+		# PSU_DDR_PHY_DX6GCR1_QSNSEL                                                      0x1
+
+		# Select the delayed or non-delayed read data strobe
+		# PSU_DDR_PHY_DX6GCR1_QSSEL                                                       0x1
+
+		# Enables Read Data Strobe in a byte lane
+		# PSU_DDR_PHY_DX6GCR1_OEEN                                                        0x1
+
+		# Enables PDR in a byte lane
+		# PSU_DDR_PHY_DX6GCR1_PDREN                                                       0x1
+
+		# Enables ODT/TE in a byte lane
+		# PSU_DDR_PHY_DX6GCR1_TEEN                                                        0x1
+
+		# Enables Write Data strobe in a byte lane
+		# PSU_DDR_PHY_DX6GCR1_DSEN                                                        0x1
+
+		# Enables DM pin in a byte lane
+		# PSU_DDR_PHY_DX6GCR1_DMEN                                                        0x1
+
+		# Enables DQ corresponding to each bit in a byte
+		# PSU_DDR_PHY_DX6GCR1_DQEN                                                        0xff
+
+		# DATX8 n General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080D04, 0xFFFFFFFFU ,0x00007FFFU)  */
+    mask_write 0XFD080D04 0xFFFFFFFF 0x00007FFF
+		# Register : DX6GCR4 @ 0XFD080D10

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX6GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX6GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX6GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX6GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX6GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX6GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX6GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX6GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX6GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX6GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080D10, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080D10 0xFFFFFFFF 0x0E00B03C
+		# Register : DX6GCR5 @ 0XFD080D14

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX6GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX6GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX6GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX6GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080D14, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080D14 0xFFFFFFFF 0x09095555
+		# Register : DX6GCR6 @ 0XFD080D18

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX6GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX6GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX6GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX6GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX6GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080D18, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080D18 0xFFFFFFFF 0x09092B2B
+		# Register : DX6LCDLR2 @ 0XFD080D88

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX6LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX6LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080D88, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080D88 0xFFFFFFFF 0x00000000
+		# Register : DX6GTR0 @ 0XFD080DC0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX6GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX6GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX6GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX6GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX6GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX6GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080DC0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD080DC0 0xFFFFFFFF 0x00020000
+		# Register : DX7GCR0 @ 0XFD080E00

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX7GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX7GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX7GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX7GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX7GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX7GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX7GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX7GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX7GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX7GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX7GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX7GCR0_DQSGPDR                                                     0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX7GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX7GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080E00, 0xFFFFFFFFU ,0x40800604U)  */
+    mask_write 0XFD080E00 0xFFFFFFFF 0x40800604
+		# Register : DX7GCR1 @ 0XFD080E04

+
+		# Enables the PDR mode for DQ[7:0]
+		# PSU_DDR_PHY_DX7GCR1_DXPDRMODE                                                   0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_DX7GCR1_RESERVED_15                                                 0x0
+
+		# Select the delayed or non-delayed read data strobe #
+		# PSU_DDR_PHY_DX7GCR1_QSNSEL                                                      0x1
+
+		# Select the delayed or non-delayed read data strobe
+		# PSU_DDR_PHY_DX7GCR1_QSSEL                                                       0x1
+
+		# Enables Read Data Strobe in a byte lane
+		# PSU_DDR_PHY_DX7GCR1_OEEN                                                        0x1
+
+		# Enables PDR in a byte lane
+		# PSU_DDR_PHY_DX7GCR1_PDREN                                                       0x1
+
+		# Enables ODT/TE in a byte lane
+		# PSU_DDR_PHY_DX7GCR1_TEEN                                                        0x1
+
+		# Enables Write Data strobe in a byte lane
+		# PSU_DDR_PHY_DX7GCR1_DSEN                                                        0x1
+
+		# Enables DM pin in a byte lane
+		# PSU_DDR_PHY_DX7GCR1_DMEN                                                        0x1
+
+		# Enables DQ corresponding to each bit in a byte
+		# PSU_DDR_PHY_DX7GCR1_DQEN                                                        0xff
+
+		# DATX8 n General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080E04, 0xFFFFFFFFU ,0x00007FFFU)  */
+    mask_write 0XFD080E04 0xFFFFFFFF 0x00007FFF
+		# Register : DX7GCR4 @ 0XFD080E10

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX7GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX7GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX7GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX7GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX7GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX7GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX7GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX7GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX7GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX7GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080E10, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080E10 0xFFFFFFFF 0x0E00B03C
+		# Register : DX7GCR5 @ 0XFD080E14

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX7GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX7GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX7GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX7GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080E14, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080E14 0xFFFFFFFF 0x09095555
+		# Register : DX7GCR6 @ 0XFD080E18

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX7GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX7GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX7GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX7GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX7GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080E18, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080E18 0xFFFFFFFF 0x09092B2B
+		# Register : DX7LCDLR2 @ 0XFD080E88

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX7LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX7LCDLR2_DQSGD                                                     0xa
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080E88, 0xFFFFFFFFU ,0x0000000AU)  */
+    mask_write 0XFD080E88 0xFFFFFFFF 0x0000000A
+		# Register : DX7GTR0 @ 0XFD080EC0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX7GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX7GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX7GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX7GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX7GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX7GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080EC0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD080EC0 0xFFFFFFFF 0x00020000
+		# Register : DX8GCR0 @ 0XFD080F00

+
+		# Calibration Bypass
+		# PSU_DDR_PHY_DX8GCR0_CALBYP                                                      0x0
+
+		# Master Delay Line Enable
+		# PSU_DDR_PHY_DX8GCR0_MDLEN                                                       0x1
+
+		# Configurable ODT(TE) Phase Shift
+		# PSU_DDR_PHY_DX8GCR0_CODTSHFT                                                    0x0
+
+		# DQS Duty Cycle Correction
+		# PSU_DDR_PHY_DX8GCR0_DQSDCC                                                      0x0
+
+		# Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		# PSU_DDR_PHY_DX8GCR0_RDDLY                                                       0x8
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8GCR0_RESERVED_19_14                                              0x0
+
+		# DQSNSE Power Down Receiver
+		# PSU_DDR_PHY_DX8GCR0_DQSNSEPDR                                                   0x0
+
+		# DQSSE Power Down Receiver
+		# PSU_DDR_PHY_DX8GCR0_DQSSEPDR                                                    0x0
+
+		# RTT On Additive Latency
+		# PSU_DDR_PHY_DX8GCR0_RTTOAL                                                      0x0
+
+		# RTT Output Hold
+		# PSU_DDR_PHY_DX8GCR0_RTTOH                                                       0x3
+
+		# Configurable PDR Phase Shift
+		# PSU_DDR_PHY_DX8GCR0_CPDRSHFT                                                    0x0
+
+		# DQSR Power Down
+		# PSU_DDR_PHY_DX8GCR0_DQSRPD                                                      0x0
+
+		# DQSG Power Down Receiver
+		# PSU_DDR_PHY_DX8GCR0_DQSGPDR                                                     0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8GCR0_RESERVED_4                                                  0x0
+
+		# DQSG On-Die Termination
+		# PSU_DDR_PHY_DX8GCR0_DQSGODT                                                     0x0
+
+		# DQSG Output Enable
+		# PSU_DDR_PHY_DX8GCR0_DQSGOE                                                      0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8GCR0_RESERVED_1_0                                                0x0
+
+		# DATX8 n General Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080F00, 0xFFFFFFFFU ,0x40800624U)  */
+    mask_write 0XFD080F00 0xFFFFFFFF 0x40800624
+		# Register : DX8GCR1 @ 0XFD080F04

+
+		# Enables the PDR mode for DQ[7:0]
+		# PSU_DDR_PHY_DX8GCR1_DXPDRMODE                                                   0x0
+
+		# Reserved. Returns zeroes on reads.
+		# PSU_DDR_PHY_DX8GCR1_RESERVED_15                                                 0x0
+
+		# Select the delayed or non-delayed read data strobe #
+		# PSU_DDR_PHY_DX8GCR1_QSNSEL                                                      0x1
+
+		# Select the delayed or non-delayed read data strobe
+		# PSU_DDR_PHY_DX8GCR1_QSSEL                                                       0x1
+
+		# Enables Read Data Strobe in a byte lane
+		# PSU_DDR_PHY_DX8GCR1_OEEN                                                        0x1
+
+		# Enables PDR in a byte lane
+		# PSU_DDR_PHY_DX8GCR1_PDREN                                                       0x1
+
+		# Enables ODT/TE in a byte lane
+		# PSU_DDR_PHY_DX8GCR1_TEEN                                                        0x1
+
+		# Enables Write Data strobe in a byte lane
+		# PSU_DDR_PHY_DX8GCR1_DSEN                                                        0x1
+
+		# Enables DM pin in a byte lane
+		# PSU_DDR_PHY_DX8GCR1_DMEN                                                        0x1
+
+		# Enables DQ corresponding to each bit in a byte
+		# PSU_DDR_PHY_DX8GCR1_DQEN                                                        0x0
+
+		# DATX8 n General Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD080F04, 0xFFFFFFFFU ,0x00007F00U)  */
+    mask_write 0XFD080F04 0xFFFFFFFF 0x00007F00
+		# Register : DX8GCR4 @ 0XFD080F10

+
+		# Byte lane VREF IOM (Used only by D4MU IOs)
+		# PSU_DDR_PHY_DX8GCR4_RESERVED_31_29                                              0x0
+
+		# Byte Lane VREF Pad Enable
+		# PSU_DDR_PHY_DX8GCR4_DXREFPEN                                                    0x0
+
+		# Byte Lane Internal VREF Enable
+		# PSU_DDR_PHY_DX8GCR4_DXREFEEN                                                    0x3
+
+		# Byte Lane Single-End VREF Enable
+		# PSU_DDR_PHY_DX8GCR4_DXREFSEN                                                    0x1
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR4_RESERVED_24                                                 0x0
+
+		# External VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX8GCR4_DXREFESELRANGE                                              0x0
+
+		# Byte Lane External VREF Select
+		# PSU_DDR_PHY_DX8GCR4_DXREFESEL                                                   0x0
+
+		# Single ended VREF generator REFSEL range select
+		# PSU_DDR_PHY_DX8GCR4_DXREFSSELRANGE                                              0x1
+
+		# Byte Lane Single-End VREF Select
+		# PSU_DDR_PHY_DX8GCR4_DXREFSSEL                                                   0x30
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR4_RESERVED_7_6                                                0x0
+
+		# VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX8GCR4_DXREFIEN                                                    0xf
+
+		# VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		# PSU_DDR_PHY_DX8GCR4_DXREFIMON                                                   0x0
+
+		# DATX8 n General Configuration Register 4
+		#(OFFSET, MASK, VALUE)      (0XFD080F10, 0xFFFFFFFFU ,0x0E00B03CU)  */
+    mask_write 0XFD080F10 0xFFFFFFFF 0x0E00B03C
+		# Register : DX8GCR5 @ 0XFD080F14

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR5_RESERVED_31                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 3
+		# PSU_DDR_PHY_DX8GCR5_DXREFISELR3                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR5_RESERVED_23                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 2
+		# PSU_DDR_PHY_DX8GCR5_DXREFISELR2                                                 0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR5_RESERVED_15                                                 0x0
+
+		# Byte Lane internal VREF Select for Rank 1
+		# PSU_DDR_PHY_DX8GCR5_DXREFISELR1                                                 0x55
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR5_RESERVED_7                                                  0x0
+
+		# Byte Lane internal VREF Select for Rank 0
+		# PSU_DDR_PHY_DX8GCR5_DXREFISELR0                                                 0x55
+
+		# DATX8 n General Configuration Register 5
+		#(OFFSET, MASK, VALUE)      (0XFD080F14, 0xFFFFFFFFU ,0x09095555U)  */
+    mask_write 0XFD080F14 0xFFFFFFFF 0x09095555
+		# Register : DX8GCR6 @ 0XFD080F18

+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR6_RESERVED_31_30                                              0x0
+
+		# DRAM DQ VREF Select for Rank3
+		# PSU_DDR_PHY_DX8GCR6_DXDQVREFR3                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR6_RESERVED_23_22                                              0x0
+
+		# DRAM DQ VREF Select for Rank2
+		# PSU_DDR_PHY_DX8GCR6_DXDQVREFR2                                                  0x9
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR6_RESERVED_15_14                                              0x0
+
+		# DRAM DQ VREF Select for Rank1
+		# PSU_DDR_PHY_DX8GCR6_DXDQVREFR1                                                  0x2b
+
+		# Reserved. Returns zeros on reads.
+		# PSU_DDR_PHY_DX8GCR6_RESERVED_7_6                                                0x0
+
+		# DRAM DQ VREF Select for Rank0
+		# PSU_DDR_PHY_DX8GCR6_DXDQVREFR0                                                  0x2b
+
+		# DATX8 n General Configuration Register 6
+		#(OFFSET, MASK, VALUE)      (0XFD080F18, 0xFFFFFFFFU ,0x09092B2BU)  */
+    mask_write 0XFD080F18 0xFFFFFFFF 0x09092B2B
+		# Register : DX8LCDLR2 @ 0XFD080F88

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8LCDLR2_RESERVED_31_25                                            0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX8LCDLR2_RESERVED_24_16                                            0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8LCDLR2_RESERVED_15_9                                             0x0
+
+		# Read DQS Gating Delay
+		# PSU_DDR_PHY_DX8LCDLR2_DQSGD                                                     0x0
+
+		# DATX8 n Local Calibrated Delay Line Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD080F88, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFD080F88 0xFFFFFFFF 0x00000000
+		# Register : DX8GTR0 @ 0XFD080FC0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8GTR0_RESERVED_31_24                                              0x0
+
+		# DQ Write Path Latency Pipeline
+		# PSU_DDR_PHY_DX8GTR0_WDQSL                                                       0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX8GTR0_RESERVED_23_20                                              0x0
+
+		# Write Leveling System Latency
+		# PSU_DDR_PHY_DX8GTR0_WLSL                                                        0x2
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8GTR0_RESERVED_15_13                                              0x0
+
+		# Reserved. Caution, do not write to this register field.
+		# PSU_DDR_PHY_DX8GTR0_RESERVED_12_8                                               0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8GTR0_RESERVED_7_5                                                0x0
+
+		# DQS Gating System Latency
+		# PSU_DDR_PHY_DX8GTR0_DGSL                                                        0x0
+
+		# DATX8 n General Timing Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD080FC0, 0xFFFFFFFFU ,0x00020000U)  */
+    mask_write 0XFD080FC0 0xFFFFFFFF 0x00020000
+		# Register : DX8SL0DQSCTL @ 0XFD08141C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25                                         0x0
+
+		# Read Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL0DQSCTL_RRRMODE                                                0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22                                         0x0
+
+		# Write Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL0DQSCTL_WRRMODE                                                0x1
+
+		# DQS Gate Extension
+		# PSU_DDR_PHY_DX8SL0DQSCTL_DQSGX                                                  0x0
+
+		# Low Power PLL Power Down
+		# PSU_DDR_PHY_DX8SL0DQSCTL_LPPLLPD                                                0x1
+
+		# Low Power I/O Power Down
+		# PSU_DDR_PHY_DX8SL0DQSCTL_LPIOPD                                                 0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15                                         0x0
+
+		# QS Counter Enable
+		# PSU_DDR_PHY_DX8SL0DQSCTL_QSCNTEN                                                0x1
+
+		# Unused DQ I/O Mode
+		# PSU_DDR_PHY_DX8SL0DQSCTL_UDQIOM                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10                                         0x0
+
+		# Data Slew Rate
+		# PSU_DDR_PHY_DX8SL0DQSCTL_DXSR                                                   0x3
+
+		# DQS_N Resistor
+		# PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES                                                0xc
+
+		# DQS Resistor
+		# PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES                                                 0x4
+
+		# DATX8 0-1 DQS Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD08141C, 0xFFFFFFFFU ,0x012643C4U)  */
+    mask_write 0XFD08141C 0xFFFFFFFF 0x012643C4
+		# Register : DX8SL0DXCTL2 @ 0XFD08142C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24                                         0x0
+
+		# Configurable Read Data Enable
+		# PSU_DDR_PHY_DX8SL0DXCTL2_CRDEN                                                  0x0
+
+		# OX Extension during Post-amble
+		# PSU_DDR_PHY_DX8SL0DXCTL2_POSOEX                                                 0x0
+
+		# OE Extension during Pre-amble
+		# PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_17                                            0x0
+
+		# I/O Assisted Gate Select
+		# PSU_DDR_PHY_DX8SL0DXCTL2_IOAG                                                   0x0
+
+		# I/O Loopback Select
+		# PSU_DDR_PHY_DX8SL0DXCTL2_IOLB                                                   0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13                                         0x0
+
+		# Low Power Wakeup Threshold
+		# PSU_DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		# Read Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL0DXCTL2_RDBI                                                   0x0
+
+		# Write Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL0DXCTL2_WDBI                                                   0x0
+
+		# PUB Read FIFO Bypass
+		# PSU_DDR_PHY_DX8SL0DXCTL2_PRFBYP                                                 0x0
+
+		# DATX8 Receive FIFO Read Mode
+		# PSU_DDR_PHY_DX8SL0DXCTL2_RDMODE                                                 0x0
+
+		# Disables the Read FIFO Reset
+		# PSU_DDR_PHY_DX8SL0DXCTL2_DISRST                                                 0x0
+
+		# Read DQS Gate I/O Loopback
+		# PSU_DDR_PHY_DX8SL0DXCTL2_DQSGLB                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_0                                             0x0
+
+		# DATX8 0-1 DX Control Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD08142C, 0xFFFFFFFFU ,0x00001800U)  */
+    mask_write 0XFD08142C 0xFFFFFFFF 0x00001800
+		# Register : DX8SL0IOCR @ 0XFD081430

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL0IOCR_RESERVED_31                                              0x0
+
+		# PVREF_DAC REFSEL range select
+		# PSU_DDR_PHY_DX8SL0IOCR_DXDACRANGE                                               0x7
+
+		# IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		# PSU_DDR_PHY_DX8SL0IOCR_DXVREFIOM                                                0x0
+
+		# DX IO Mode
+		# PSU_DDR_PHY_DX8SL0IOCR_DXIOM                                                    0x2
+
+		# DX IO Transmitter Mode
+		# PSU_DDR_PHY_DX8SL0IOCR_DXTXM                                                    0x0
+
+		# DX IO Receiver Mode
+		# PSU_DDR_PHY_DX8SL0IOCR_DXRXM                                                    0x0
+
+		# DATX8 0-1 I/O Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD081430, 0xFFFFFFFFU ,0x70800000U)  */
+    mask_write 0XFD081430 0xFFFFFFFF 0x70800000
+		# Register : DX8SL1DQSCTL @ 0XFD08145C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25                                         0x0
+
+		# Read Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL1DQSCTL_RRRMODE                                                0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22                                         0x0
+
+		# Write Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL1DQSCTL_WRRMODE                                                0x1
+
+		# DQS Gate Extension
+		# PSU_DDR_PHY_DX8SL1DQSCTL_DQSGX                                                  0x0
+
+		# Low Power PLL Power Down
+		# PSU_DDR_PHY_DX8SL1DQSCTL_LPPLLPD                                                0x1
+
+		# Low Power I/O Power Down
+		# PSU_DDR_PHY_DX8SL1DQSCTL_LPIOPD                                                 0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15                                         0x0
+
+		# QS Counter Enable
+		# PSU_DDR_PHY_DX8SL1DQSCTL_QSCNTEN                                                0x1
+
+		# Unused DQ I/O Mode
+		# PSU_DDR_PHY_DX8SL1DQSCTL_UDQIOM                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10                                         0x0
+
+		# Data Slew Rate
+		# PSU_DDR_PHY_DX8SL1DQSCTL_DXSR                                                   0x3
+
+		# DQS_N Resistor
+		# PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES                                                0xc
+
+		# DQS Resistor
+		# PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES                                                 0x4
+
+		# DATX8 0-1 DQS Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD08145C, 0xFFFFFFFFU ,0x012643C4U)  */
+    mask_write 0XFD08145C 0xFFFFFFFF 0x012643C4
+		# Register : DX8SL1DXCTL2 @ 0XFD08146C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24                                         0x0
+
+		# Configurable Read Data Enable
+		# PSU_DDR_PHY_DX8SL1DXCTL2_CRDEN                                                  0x0
+
+		# OX Extension during Post-amble
+		# PSU_DDR_PHY_DX8SL1DXCTL2_POSOEX                                                 0x0
+
+		# OE Extension during Pre-amble
+		# PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_17                                            0x0
+
+		# I/O Assisted Gate Select
+		# PSU_DDR_PHY_DX8SL1DXCTL2_IOAG                                                   0x0
+
+		# I/O Loopback Select
+		# PSU_DDR_PHY_DX8SL1DXCTL2_IOLB                                                   0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13                                         0x0
+
+		# Low Power Wakeup Threshold
+		# PSU_DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		# Read Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL1DXCTL2_RDBI                                                   0x0
+
+		# Write Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL1DXCTL2_WDBI                                                   0x0
+
+		# PUB Read FIFO Bypass
+		# PSU_DDR_PHY_DX8SL1DXCTL2_PRFBYP                                                 0x0
+
+		# DATX8 Receive FIFO Read Mode
+		# PSU_DDR_PHY_DX8SL1DXCTL2_RDMODE                                                 0x0
+
+		# Disables the Read FIFO Reset
+		# PSU_DDR_PHY_DX8SL1DXCTL2_DISRST                                                 0x0
+
+		# Read DQS Gate I/O Loopback
+		# PSU_DDR_PHY_DX8SL1DXCTL2_DQSGLB                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_0                                             0x0
+
+		# DATX8 0-1 DX Control Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD08146C, 0xFFFFFFFFU ,0x00001800U)  */
+    mask_write 0XFD08146C 0xFFFFFFFF 0x00001800
+		# Register : DX8SL1IOCR @ 0XFD081470

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL1IOCR_RESERVED_31                                              0x0
+
+		# PVREF_DAC REFSEL range select
+		# PSU_DDR_PHY_DX8SL1IOCR_DXDACRANGE                                               0x7
+
+		# IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		# PSU_DDR_PHY_DX8SL1IOCR_DXVREFIOM                                                0x0
+
+		# DX IO Mode
+		# PSU_DDR_PHY_DX8SL1IOCR_DXIOM                                                    0x2
+
+		# DX IO Transmitter Mode
+		# PSU_DDR_PHY_DX8SL1IOCR_DXTXM                                                    0x0
+
+		# DX IO Receiver Mode
+		# PSU_DDR_PHY_DX8SL1IOCR_DXRXM                                                    0x0
+
+		# DATX8 0-1 I/O Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD081470, 0xFFFFFFFFU ,0x70800000U)  */
+    mask_write 0XFD081470 0xFFFFFFFF 0x70800000
+		# Register : DX8SL2DQSCTL @ 0XFD08149C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25                                         0x0
+
+		# Read Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL2DQSCTL_RRRMODE                                                0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22                                         0x0
+
+		# Write Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL2DQSCTL_WRRMODE                                                0x1
+
+		# DQS Gate Extension
+		# PSU_DDR_PHY_DX8SL2DQSCTL_DQSGX                                                  0x0
+
+		# Low Power PLL Power Down
+		# PSU_DDR_PHY_DX8SL2DQSCTL_LPPLLPD                                                0x1
+
+		# Low Power I/O Power Down
+		# PSU_DDR_PHY_DX8SL2DQSCTL_LPIOPD                                                 0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15                                         0x0
+
+		# QS Counter Enable
+		# PSU_DDR_PHY_DX8SL2DQSCTL_QSCNTEN                                                0x1
+
+		# Unused DQ I/O Mode
+		# PSU_DDR_PHY_DX8SL2DQSCTL_UDQIOM                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10                                         0x0
+
+		# Data Slew Rate
+		# PSU_DDR_PHY_DX8SL2DQSCTL_DXSR                                                   0x3
+
+		# DQS_N Resistor
+		# PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES                                                0xc
+
+		# DQS Resistor
+		# PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES                                                 0x4
+
+		# DATX8 0-1 DQS Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD08149C, 0xFFFFFFFFU ,0x012643C4U)  */
+    mask_write 0XFD08149C 0xFFFFFFFF 0x012643C4
+		# Register : DX8SL2DXCTL2 @ 0XFD0814AC

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24                                         0x0
+
+		# Configurable Read Data Enable
+		# PSU_DDR_PHY_DX8SL2DXCTL2_CRDEN                                                  0x0
+
+		# OX Extension during Post-amble
+		# PSU_DDR_PHY_DX8SL2DXCTL2_POSOEX                                                 0x0
+
+		# OE Extension during Pre-amble
+		# PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_17                                            0x0
+
+		# I/O Assisted Gate Select
+		# PSU_DDR_PHY_DX8SL2DXCTL2_IOAG                                                   0x0
+
+		# I/O Loopback Select
+		# PSU_DDR_PHY_DX8SL2DXCTL2_IOLB                                                   0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13                                         0x0
+
+		# Low Power Wakeup Threshold
+		# PSU_DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		# Read Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL2DXCTL2_RDBI                                                   0x0
+
+		# Write Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL2DXCTL2_WDBI                                                   0x0
+
+		# PUB Read FIFO Bypass
+		# PSU_DDR_PHY_DX8SL2DXCTL2_PRFBYP                                                 0x0
+
+		# DATX8 Receive FIFO Read Mode
+		# PSU_DDR_PHY_DX8SL2DXCTL2_RDMODE                                                 0x0
+
+		# Disables the Read FIFO Reset
+		# PSU_DDR_PHY_DX8SL2DXCTL2_DISRST                                                 0x0
+
+		# Read DQS Gate I/O Loopback
+		# PSU_DDR_PHY_DX8SL2DXCTL2_DQSGLB                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_0                                             0x0
+
+		# DATX8 0-1 DX Control Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD0814AC, 0xFFFFFFFFU ,0x00001800U)  */
+    mask_write 0XFD0814AC 0xFFFFFFFF 0x00001800
+		# Register : DX8SL2IOCR @ 0XFD0814B0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL2IOCR_RESERVED_31                                              0x0
+
+		# PVREF_DAC REFSEL range select
+		# PSU_DDR_PHY_DX8SL2IOCR_DXDACRANGE                                               0x7
+
+		# IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		# PSU_DDR_PHY_DX8SL2IOCR_DXVREFIOM                                                0x0
+
+		# DX IO Mode
+		# PSU_DDR_PHY_DX8SL2IOCR_DXIOM                                                    0x2
+
+		# DX IO Transmitter Mode
+		# PSU_DDR_PHY_DX8SL2IOCR_DXTXM                                                    0x0
+
+		# DX IO Receiver Mode
+		# PSU_DDR_PHY_DX8SL2IOCR_DXRXM                                                    0x0
+
+		# DATX8 0-1 I/O Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD0814B0, 0xFFFFFFFFU ,0x70800000U)  */
+    mask_write 0XFD0814B0 0xFFFFFFFF 0x70800000
+		# Register : DX8SL3DQSCTL @ 0XFD0814DC

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25                                         0x0
+
+		# Read Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL3DQSCTL_RRRMODE                                                0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22                                         0x0
+
+		# Write Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL3DQSCTL_WRRMODE                                                0x1
+
+		# DQS Gate Extension
+		# PSU_DDR_PHY_DX8SL3DQSCTL_DQSGX                                                  0x0
+
+		# Low Power PLL Power Down
+		# PSU_DDR_PHY_DX8SL3DQSCTL_LPPLLPD                                                0x1
+
+		# Low Power I/O Power Down
+		# PSU_DDR_PHY_DX8SL3DQSCTL_LPIOPD                                                 0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15                                         0x0
+
+		# QS Counter Enable
+		# PSU_DDR_PHY_DX8SL3DQSCTL_QSCNTEN                                                0x1
+
+		# Unused DQ I/O Mode
+		# PSU_DDR_PHY_DX8SL3DQSCTL_UDQIOM                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10                                         0x0
+
+		# Data Slew Rate
+		# PSU_DDR_PHY_DX8SL3DQSCTL_DXSR                                                   0x3
+
+		# DQS_N Resistor
+		# PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES                                                0xc
+
+		# DQS Resistor
+		# PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES                                                 0x4
+
+		# DATX8 0-1 DQS Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0814DC, 0xFFFFFFFFU ,0x012643C4U)  */
+    mask_write 0XFD0814DC 0xFFFFFFFF 0x012643C4
+		# Register : DX8SL3DXCTL2 @ 0XFD0814EC

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24                                         0x0
+
+		# Configurable Read Data Enable
+		# PSU_DDR_PHY_DX8SL3DXCTL2_CRDEN                                                  0x0
+
+		# OX Extension during Post-amble
+		# PSU_DDR_PHY_DX8SL3DXCTL2_POSOEX                                                 0x0
+
+		# OE Extension during Pre-amble
+		# PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_17                                            0x0
+
+		# I/O Assisted Gate Select
+		# PSU_DDR_PHY_DX8SL3DXCTL2_IOAG                                                   0x0
+
+		# I/O Loopback Select
+		# PSU_DDR_PHY_DX8SL3DXCTL2_IOLB                                                   0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13                                         0x0
+
+		# Low Power Wakeup Threshold
+		# PSU_DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		# Read Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL3DXCTL2_RDBI                                                   0x0
+
+		# Write Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL3DXCTL2_WDBI                                                   0x0
+
+		# PUB Read FIFO Bypass
+		# PSU_DDR_PHY_DX8SL3DXCTL2_PRFBYP                                                 0x0
+
+		# DATX8 Receive FIFO Read Mode
+		# PSU_DDR_PHY_DX8SL3DXCTL2_RDMODE                                                 0x0
+
+		# Disables the Read FIFO Reset
+		# PSU_DDR_PHY_DX8SL3DXCTL2_DISRST                                                 0x0
+
+		# Read DQS Gate I/O Loopback
+		# PSU_DDR_PHY_DX8SL3DXCTL2_DQSGLB                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_0                                             0x0
+
+		# DATX8 0-1 DX Control Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD0814EC, 0xFFFFFFFFU ,0x00001800U)  */
+    mask_write 0XFD0814EC 0xFFFFFFFF 0x00001800
+		# Register : DX8SL3IOCR @ 0XFD0814F0

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL3IOCR_RESERVED_31                                              0x0
+
+		# PVREF_DAC REFSEL range select
+		# PSU_DDR_PHY_DX8SL3IOCR_DXDACRANGE                                               0x7
+
+		# IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		# PSU_DDR_PHY_DX8SL3IOCR_DXVREFIOM                                                0x0
+
+		# DX IO Mode
+		# PSU_DDR_PHY_DX8SL3IOCR_DXIOM                                                    0x2
+
+		# DX IO Transmitter Mode
+		# PSU_DDR_PHY_DX8SL3IOCR_DXTXM                                                    0x0
+
+		# DX IO Receiver Mode
+		# PSU_DDR_PHY_DX8SL3IOCR_DXRXM                                                    0x0
+
+		# DATX8 0-1 I/O Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD0814F0, 0xFFFFFFFFU ,0x70800000U)  */
+    mask_write 0XFD0814F0 0xFFFFFFFF 0x70800000
+		# Register : DX8SL4DQSCTL @ 0XFD08151C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25                                         0x0
+
+		# Read Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL4DQSCTL_RRRMODE                                                0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22                                         0x0
+
+		# Write Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SL4DQSCTL_WRRMODE                                                0x1
+
+		# DQS Gate Extension
+		# PSU_DDR_PHY_DX8SL4DQSCTL_DQSGX                                                  0x0
+
+		# Low Power PLL Power Down
+		# PSU_DDR_PHY_DX8SL4DQSCTL_LPPLLPD                                                0x1
+
+		# Low Power I/O Power Down
+		# PSU_DDR_PHY_DX8SL4DQSCTL_LPIOPD                                                 0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15                                         0x0
+
+		# QS Counter Enable
+		# PSU_DDR_PHY_DX8SL4DQSCTL_QSCNTEN                                                0x1
+
+		# Unused DQ I/O Mode
+		# PSU_DDR_PHY_DX8SL4DQSCTL_UDQIOM                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10                                         0x0
+
+		# Data Slew Rate
+		# PSU_DDR_PHY_DX8SL4DQSCTL_DXSR                                                   0x3
+
+		# DQS_N Resistor
+		# PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES                                                0xc
+
+		# DQS Resistor
+		# PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES                                                 0x4
+
+		# DATX8 0-1 DQS Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD08151C, 0xFFFFFFFFU ,0x012643C4U)  */
+    mask_write 0XFD08151C 0xFFFFFFFF 0x012643C4
+		# Register : DX8SL4DXCTL2 @ 0XFD08152C

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24                                         0x0
+
+		# Configurable Read Data Enable
+		# PSU_DDR_PHY_DX8SL4DXCTL2_CRDEN                                                  0x0
+
+		# OX Extension during Post-amble
+		# PSU_DDR_PHY_DX8SL4DXCTL2_POSOEX                                                 0x0
+
+		# OE Extension during Pre-amble
+		# PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_17                                            0x0
+
+		# I/O Assisted Gate Select
+		# PSU_DDR_PHY_DX8SL4DXCTL2_IOAG                                                   0x0
+
+		# I/O Loopback Select
+		# PSU_DDR_PHY_DX8SL4DXCTL2_IOLB                                                   0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13                                         0x0
+
+		# Low Power Wakeup Threshold
+		# PSU_DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		# Read Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL4DXCTL2_RDBI                                                   0x0
+
+		# Write Data Bus Inversion Enable
+		# PSU_DDR_PHY_DX8SL4DXCTL2_WDBI                                                   0x0
+
+		# PUB Read FIFO Bypass
+		# PSU_DDR_PHY_DX8SL4DXCTL2_PRFBYP                                                 0x0
+
+		# DATX8 Receive FIFO Read Mode
+		# PSU_DDR_PHY_DX8SL4DXCTL2_RDMODE                                                 0x0
+
+		# Disables the Read FIFO Reset
+		# PSU_DDR_PHY_DX8SL4DXCTL2_DISRST                                                 0x0
+
+		# Read DQS Gate I/O Loopback
+		# PSU_DDR_PHY_DX8SL4DXCTL2_DQSGLB                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_0                                             0x0
+
+		# DATX8 0-1 DX Control Register 2
+		#(OFFSET, MASK, VALUE)      (0XFD08152C, 0xFFFFFFFFU ,0x00001800U)  */
+    mask_write 0XFD08152C 0xFFFFFFFF 0x00001800
+		# Register : DX8SL4IOCR @ 0XFD081530

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SL4IOCR_RESERVED_31                                              0x0
+
+		# PVREF_DAC REFSEL range select
+		# PSU_DDR_PHY_DX8SL4IOCR_DXDACRANGE                                               0x7
+
+		# IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		# PSU_DDR_PHY_DX8SL4IOCR_DXVREFIOM                                                0x0
+
+		# DX IO Mode
+		# PSU_DDR_PHY_DX8SL4IOCR_DXIOM                                                    0x2
+
+		# DX IO Transmitter Mode
+		# PSU_DDR_PHY_DX8SL4IOCR_DXTXM                                                    0x0
+
+		# DX IO Receiver Mode
+		# PSU_DDR_PHY_DX8SL4IOCR_DXRXM                                                    0x0
+
+		# DATX8 0-1 I/O Configuration Register
+		#(OFFSET, MASK, VALUE)      (0XFD081530, 0xFFFFFFFFU ,0x70800000U)  */
+    mask_write 0XFD081530 0xFFFFFFFF 0x70800000
+		# Register : DX8SLbDQSCTL @ 0XFD0817DC

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25                                         0x0
+
+		# Read Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SLBDQSCTL_RRRMODE                                                0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22                                         0x0
+
+		# Write Path Rise-to-Rise Mode
+		# PSU_DDR_PHY_DX8SLBDQSCTL_WRRMODE                                                0x1
+
+		# DQS Gate Extension
+		# PSU_DDR_PHY_DX8SLBDQSCTL_DQSGX                                                  0x0
+
+		# Low Power PLL Power Down
+		# PSU_DDR_PHY_DX8SLBDQSCTL_LPPLLPD                                                0x1
+
+		# Low Power I/O Power Down
+		# PSU_DDR_PHY_DX8SLBDQSCTL_LPIOPD                                                 0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15                                         0x0
+
+		# QS Counter Enable
+		# PSU_DDR_PHY_DX8SLBDQSCTL_QSCNTEN                                                0x1
+
+		# Unused DQ I/O Mode
+		# PSU_DDR_PHY_DX8SLBDQSCTL_UDQIOM                                                 0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10                                         0x0
+
+		# Data Slew Rate
+		# PSU_DDR_PHY_DX8SLBDQSCTL_DXSR                                                   0x3
+
+		# DQS# Resistor
+		# PSU_DDR_PHY_DX8SLBDQSCTL_DQSNRES                                                0xc
+
+		# DQS Resistor
+		# PSU_DDR_PHY_DX8SLBDQSCTL_DQSRES                                                 0x4
+
+		# DATX8 0-8 DQS Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD0817DC, 0xFFFFFFFFU ,0x012643C4U)  */
+    mask_write 0XFD0817DC 0xFFFFFFFF 0x012643C4
+		# Register : PIR @ 0XFD080004

+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_PIR_RESERVED_31                                                     0x0
+
+		# Impedance Calibration Bypass
+		# PSU_DDR_PHY_PIR_ZCALBYP                                                         0x0
+
+		# Digital Delay Line (DDL) Calibration Pause
+		# PSU_DDR_PHY_PIR_DCALPSE                                                         0x0
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_PIR_RESERVED_28_21                                                  0x0
+
+		# Write DQS2DQ Training
+		# PSU_DDR_PHY_PIR_DQS2DQ                                                          0x0
+
+		# RDIMM Initialization
+		# PSU_DDR_PHY_PIR_RDIMMINIT                                                       0x0
+
+		# Controller DRAM Initialization
+		# PSU_DDR_PHY_PIR_CTLDINIT                                                        0x1
+
+		# VREF Training
+		# PSU_DDR_PHY_PIR_VREF                                                            0x0
+
+		# Static Read Training
+		# PSU_DDR_PHY_PIR_SRD                                                             0x0
+
+		# Write Data Eye Training
+		# PSU_DDR_PHY_PIR_WREYE                                                           0x0
+
+		# Read Data Eye Training
+		# PSU_DDR_PHY_PIR_RDEYE                                                           0x0
+
+		# Write Data Bit Deskew
+		# PSU_DDR_PHY_PIR_WRDSKW                                                          0x0
+
+		# Read Data Bit Deskew
+		# PSU_DDR_PHY_PIR_RDDSKW                                                          0x0
+
+		# Write Leveling Adjust
+		# PSU_DDR_PHY_PIR_WLADJ                                                           0x0
+
+		# Read DQS Gate Training
+		# PSU_DDR_PHY_PIR_QSGATE                                                          0x0
+
+		# Write Leveling
+		# PSU_DDR_PHY_PIR_WL                                                              0x0
+
+		# DRAM Initialization
+		# PSU_DDR_PHY_PIR_DRAMINIT                                                        0x0
+
+		# DRAM Reset (DDR3/DDR4/LPDDR4 Only)
+		# PSU_DDR_PHY_PIR_DRAMRST                                                         0x0
+
+		# PHY Reset
+		# PSU_DDR_PHY_PIR_PHYRST                                                          0x1
+
+		# Digital Delay Line (DDL) Calibration
+		# PSU_DDR_PHY_PIR_DCAL                                                            0x1
+
+		# PLL Initialiazation
+		# PSU_DDR_PHY_PIR_PLLINIT                                                         0x1
+
+		# Reserved. Return zeroes on reads.
+		# PSU_DDR_PHY_PIR_RESERVED_3                                                      0x0
+
+		# CA Training
+		# PSU_DDR_PHY_PIR_CA                                                              0x0
+
+		# Impedance Calibration
+		# PSU_DDR_PHY_PIR_ZCAL                                                            0x1
+
+		# Initialization Trigger
+		# PSU_DDR_PHY_PIR_INIT                                                            0x1
+
+		# PHY Initialization Register
+		#(OFFSET, MASK, VALUE)      (0XFD080004, 0xFFFFFFFFU ,0x00040073U)  */
+    mask_write 0XFD080004 0xFFFFFFFF 0x00040073
+}
+
+set psu_mio_init_data {
+		# : MIO PROGRAMMING
+		# Register : MIO_PIN_0 @ 0XFF180000

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out- (QSPI Clock)
+		# PSU_IOU_SLCR_MIO_PIN_0_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_0_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[0]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[0]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_0_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[0]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[0]- (GPIO bank 0) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		# ) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		# lk- (Trace Port Clock)
+		# PSU_IOU_SLCR_MIO_PIN_0_L3_SEL                                                   0
+
+		# Configures MIO Pin 0 peripheral interface mapping. S
+		#(OFFSET, MASK, VALUE)      (0XFF180000, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180000 0x000000FE 0x00000002
+		# Register : MIO_PIN_1 @ 0XFF180004

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_mi1- (QSPI Databus) 1= qspi, Output, qspi_so_mo1- (QSPI Data
+		# us)
+		# PSU_IOU_SLCR_MIO_PIN_1_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_1_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[1]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[1]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_1_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[1]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[1]- (GPIO bank 0) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_o
+		# t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		# Signal)
+		# PSU_IOU_SLCR_MIO_PIN_1_L3_SEL                                                   0
+
+		# Configures MIO Pin 1 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180004, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180004 0x000000FE 0x00000002
+		# Register : MIO_PIN_2 @ 0XFF180008

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi2- (QSPI Databus) 1= qspi, Output, qspi_mo2- (QSPI Databus)
+		# PSU_IOU_SLCR_MIO_PIN_2_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_2_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[2]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[2]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_2_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[2]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[2]- (GPIO bank 0) 1= can
+		# , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		#  3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc2, Input, ttc2_clk_in
+		#  (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_2_L3_SEL                                                   0
+
+		# Configures MIO Pin 2 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180008, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180008 0x000000FE 0x00000002
+		# Register : MIO_PIN_3 @ 0XFF18000C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi3- (QSPI Databus) 1= qspi, Output, qspi_mo3- (QSPI Databus)
+		# PSU_IOU_SLCR_MIO_PIN_3_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_3_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[3]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[3]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_3_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[3]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[3]- (GPIO bank 0) 1= can
+		# , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		# ) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		# - (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		# output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_3_L3_SEL                                                   0
+
+		# Configures MIO Pin 3 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18000C, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF18000C 0x000000FE 0x00000002
+		# Register : MIO_PIN_4 @ 0XFF180010

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_mo_mo0- (QSPI Databus) 1= qspi, Input, qspi_si_mi0- (QSPI Data
+		# us)
+		# PSU_IOU_SLCR_MIO_PIN_4_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_4_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[4]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[4]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_4_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[4]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[4]- (GPIO bank 0) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		# - (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		# utput, tracedq[2]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_4_L3_SEL                                                   0
+
+		# Configures MIO Pin 4 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180010, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180010 0x000000FE 0x00000002
+		# Register : MIO_PIN_5 @ 0XFF180014

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out- (QSPI Slave Select)
+		# PSU_IOU_SLCR_MIO_PIN_5_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_5_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[5]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[5]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_5_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[5]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[5]- (GPIO bank 0) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		# si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		#  trace, Output, tracedq[3]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_5_L3_SEL                                                   0
+
+		# Configures MIO Pin 5 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180014, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180014 0x000000FE 0x00000002
+		# Register : MIO_PIN_6 @ 0XFF180018

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_clk_for_lpbk- (QSPI Clock to be fed-back)
+		# PSU_IOU_SLCR_MIO_PIN_6_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_6_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[6]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[6]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_6_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[6]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[6]- (GPIO bank 0) 1= can
+		# , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		#  3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1
+		# sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace,
+		# Output, tracedq[4]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_6_L3_SEL                                                   0
+
+		# Configures MIO Pin 6 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180018, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180018 0x000000FE 0x00000002
+		# Register : MIO_PIN_7 @ 0XFF18001C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out_upper- (QSPI Slave Select upper)
+		# PSU_IOU_SLCR_MIO_PIN_7_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_7_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[7]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[7]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_7_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[7]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[7]- (GPIO bank 0) 1= can
+		# , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		# ) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= 
+		# tc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, 
+		# racedq[5]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_7_L3_SEL                                                   0
+
+		# Configures MIO Pin 7 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18001C, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF18001C 0x000000FE 0x00000002
+		# Register : MIO_PIN_8 @ 0XFF180020

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[0]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		# [0]- (QSPI Upper Databus)
+		# PSU_IOU_SLCR_MIO_PIN_8_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_8_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[8]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[8]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_8_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[8]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[8]- (GPIO bank 0) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc
+		# , Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Tr
+		# ce Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_8_L3_SEL                                                   0
+
+		# Configures MIO Pin 8 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180020, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180020 0x000000FE 0x00000002
+		# Register : MIO_PIN_9 @ 0XFF180024

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[1]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		# [1]- (QSPI Upper Databus)
+		# PSU_IOU_SLCR_MIO_PIN_9_L0_SEL                                                   1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
+		# PSU_IOU_SLCR_MIO_PIN_9_L1_SEL                                                   0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[9]- (Test Scan Port) = test_scan, Outp
+		# t, test_scan_out[9]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_9_L2_SEL                                                   0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[9]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[9]- (GPIO bank 0) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, 
+		# utput, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (U
+		# RT receiver serial input) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_9_L3_SEL                                                   0
+
+		# Configures MIO Pin 9 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180024, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180024 0x000000FE 0x00000002
+		# Register : MIO_PIN_10 @ 0XFF180028

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[2]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		# [2]- (QSPI Upper Databus)
+		# PSU_IOU_SLCR_MIO_PIN_10_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
+		# PSU_IOU_SLCR_MIO_PIN_10_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[10]- (Test Scan Port) = test_scan, Out
+		# ut, test_scan_out[10]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_10_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[10]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[10]- (GPIO bank 0) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		# o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		# t, tracedq[8]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_10_L3_SEL                                                  0
+
+		# Configures MIO Pin 10 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180028, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180028 0x000000FE 0x00000002
+		# Register : MIO_PIN_11 @ 0XFF18002C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[3]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		# [3]- (QSPI Upper Databus)
+		# PSU_IOU_SLCR_MIO_PIN_11_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
+		# PSU_IOU_SLCR_MIO_PIN_11_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[11]- (Test Scan Port) = test_scan, Out
+		# ut, test_scan_out[11]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_11_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[11]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[11]- (GPIO bank 0) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		# i1_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		# tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_11_L3_SEL                                                  0
+
+		# Configures MIO Pin 11 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18002C, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF18002C 0x000000FE 0x00000002
+		# Register : MIO_PIN_12 @ 0XFF180030

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out_upper- (QSPI Upper Clock)
+		# PSU_IOU_SLCR_MIO_PIN_12_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		# 
+		# PSU_IOU_SLCR_MIO_PIN_12_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[12]- (Test Scan Port) = test_scan, Out
+		# ut, test_scan_out[12]- (Test Scan Port) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_12_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[12]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[12]- (GPIO bank 0) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cl
+		# ck) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trac
+		# dq[10]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_12_L3_SEL                                                  0
+
+		# Configures MIO Pin 12 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180030, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180030 0x000000FE 0x00000002
+		# Register : MIO_PIN_13 @ 0XFF180034

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_13_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[0]- (NAND chip enable)
+		# PSU_IOU_SLCR_MIO_PIN_13_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[13]- (Test Scan Port) = test_scan, Output, test_scan_out[13]- (Test Scan Port
+		#  3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_13_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[13]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[13]- (GPIO bank 0) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave
+		# out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, tracedq[11]- (Trace Port Dat
+		# bus)
+		# PSU_IOU_SLCR_MIO_PIN_13_L3_SEL                                                  0
+
+		# Configures MIO Pin 13 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180034, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF180034 0x000000FE 0x00000000
+		# Register : MIO_PIN_14 @ 0XFF180038

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_14_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_cle- (NAND Command Latch Enable)
+		# PSU_IOU_SLCR_MIO_PIN_14_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[14]- (Test Scan Port) = test_scan, Output, test_scan_out[14]- (Test Scan Port
+		#  3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_14_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[14]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[14]- (GPIO bank 0) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_
+		# n- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_14_L3_SEL                                                  2
+
+		# Configures MIO Pin 14 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180038, 0x000000FEU ,0x00000040U)  */
+    mask_write 0XFF180038 0x000000FE 0x00000040
+		# Register : MIO_PIN_15 @ 0XFF18003C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_15_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ale- (NAND Address Latch Enable)
+		# PSU_IOU_SLCR_MIO_PIN_15_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[15]- (Test Scan Port) = test_scan, Output, test_scan_out[15]- (Test Scan Port
+		#  3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_15_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[15]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[15]- (GPIO bank 0) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out
+		# 0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter seri
+		# l output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_15_L3_SEL                                                  2
+
+		# Configures MIO Pin 15 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18003C, 0x000000FEU ,0x00000040U)  */
+    mask_write 0XFF18003C 0x000000FE 0x00000040
+		# Register : MIO_PIN_16 @ 0XFF180040

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_16_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[0]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[0]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_16_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[16]- (Test Scan Port) = test_scan, Output, test_scan_out[16]- (Test Scan Port
+		#  3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_16_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[16]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[16]- (GPIO bank 0) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		# so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		#  Output, tracedq[14]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_16_L3_SEL                                                  2
+
+		# Configures MIO Pin 16 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180040, 0x000000FEU ,0x00000040U)  */
+    mask_write 0XFF180040 0x000000FE 0x00000040
+		# Register : MIO_PIN_17 @ 0XFF180044

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_17_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[1]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[1]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_17_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[17]- (Test Scan Port) = test_scan, Output, test_scan_out[17]- (Test Scan Port
+		#  3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_17_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[17]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[17]- (GPIO bank 0) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		# 0_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		# 7= trace, Output, tracedq[15]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_17_L3_SEL                                                  2
+
+		# Configures MIO Pin 17 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180044, 0x000000FEU ,0x00000040U)  */
+    mask_write 0XFF180044 0x000000FE 0x00000040
+		# Register : MIO_PIN_18 @ 0XFF180048

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_18_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[2]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[2]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_18_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[18]- (Test Scan Port) = test_scan, Output, test_scan_out[18]- (Test Scan Port
+		#  3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_18_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[18]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[18]- (GPIO bank 0) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		# o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_18_L3_SEL                                                  6
+
+		# Configures MIO Pin 18 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180048, 0x000000FEU ,0x000000C0U)  */
+    mask_write 0XFF180048 0x000000FE 0x000000C0
+		# Register : MIO_PIN_19 @ 0XFF18004C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_19_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[3]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[3]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_19_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[19]- (Test Scan Port) = test_scan, Output, test_scan_out[19]- (Test Scan Port
+		#  3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_19_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[19]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[19]- (GPIO bank 0) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		#  ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_19_L3_SEL                                                  6
+
+		# Configures MIO Pin 19 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18004C, 0x000000FEU ,0x000000C0U)  */
+    mask_write 0XFF18004C 0x000000FE 0x000000C0
+		# Register : MIO_PIN_20 @ 0XFF180050

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_20_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[4]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[4]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_20_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		# bit Data bus) 2= test_scan, Input, test_scan_in[20]- (Test Scan Port) = test_scan, Output, test_scan_out[20]- (Test Scan Port
+		#  3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_20_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[20]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[20]- (GPIO bank 0) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= t
+		# c1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_20_L3_SEL                                                  6
+
+		# Configures MIO Pin 20 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180050, 0x000000FEU ,0x000000C0U)  */
+    mask_write 0XFF180050 0x000000FE 0x000000C0
+		# Register : MIO_PIN_21 @ 0XFF180054

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_21_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[5]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[5]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_21_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		#  Indicator) 2= test_scan, Input, test_scan_in[21]- (Test Scan Port) = test_scan, Output, test_scan_out[21]- (Test Scan Port) 
+		# = csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_21_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[21]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[21]- (GPIO bank 0) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		#  Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- 
+		# UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_21_L3_SEL                                                  6
+
+		# Configures MIO Pin 21 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180054, 0x000000FEU ,0x000000C0U)  */
+    mask_write 0XFF180054 0x000000FE 0x000000C0
+		# Register : MIO_PIN_22 @ 0XFF180058

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_22_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_we_b- (NAND Write Enable)
+		# PSU_IOU_SLCR_MIO_PIN_22_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= test_scan, Input, test_scan_in[22]-
+		# (Test Scan Port) = test_scan, Output, test_scan_out[22]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_22_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[22]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[22]- (GPIO bank 0) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		# 1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		# sed
+		# PSU_IOU_SLCR_MIO_PIN_22_L3_SEL                                                  0
+
+		# Configures MIO Pin 22 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180058, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF180058 0x000000FE 0x00000000
+		# Register : MIO_PIN_23 @ 0XFF18005C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_23_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[6]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[6]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_23_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= test_scan, Input, test_scan_in
+		# 23]- (Test Scan Port) = test_scan, Output, test_scan_out[23]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper
+		# 
+		# PSU_IOU_SLCR_MIO_PIN_23_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[23]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[23]- (GPIO bank 0) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		# i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		# tput) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_23_L3_SEL                                                  0
+
+		# Configures MIO Pin 23 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18005C, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF18005C 0x000000FE 0x00000000
+		# Register : MIO_PIN_24 @ 0XFF180060

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_24_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[7]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[7]- (NAND 
+		# ata Bus)
+		# PSU_IOU_SLCR_MIO_PIN_24_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= test_scan, Input, test
+		# scan_in[24]- (Test Scan Port) = test_scan, Output, test_scan_out[24]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ex
+		#  Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_24_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[24]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[24]- (GPIO bank 0) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= Not Used 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1,
+		# Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_24_L3_SEL                                                  1
+
+		# Configures MIO Pin 24 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180060, 0x000000FEU ,0x00000020U)  */
+    mask_write 0XFF180060 0x000000FE 0x00000020
+		# Register : MIO_PIN_25 @ 0XFF180064

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_25_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_re_n- (NAND Read Enable)
+		# PSU_IOU_SLCR_MIO_PIN_25_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= test_scan, Input,
+		# test_scan_in[25]- (Test Scan Port) = test_scan, Output, test_scan_out[25]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (C
+		# U Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_25_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[25]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[25]- (GPIO bank 0) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= Not Used 5= ttc3, Output, ttc3_wave_out- (TTC Waveform 
+		# lock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_25_L3_SEL                                                  1
+
+		# Configures MIO Pin 25 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180064, 0x000000FEU ,0x00000020U)  */
+    mask_write 0XFF180064 0x000000FE 0x00000020
+		# Register : MIO_PIN_26 @ 0XFF180068

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_clk- (TX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_26_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
+		# PSU_IOU_SLCR_MIO_PIN_26_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc
+		# n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_26_L2_SEL                                                  1
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can
+		# , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		#  3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clock
+		#  5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		# Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_26_L3_SEL                                                  0
+
+		# Configures MIO Pin 26 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180068, 0x000000FEU ,0x00000008U)  */
+    mask_write 0XFF180068 0x000000FE 0x00000008
+		# Register : MIO_PIN_27 @ 0XFF18006C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[0]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_27_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
+		# PSU_IOU_SLCR_MIO_PIN_27_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc
+		# n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		# t, dp_aux_data_out- (Dp Aux Data)
+		# PSU_IOU_SLCR_MIO_PIN_27_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can
+		# , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		# ) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		# ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		# atabus)
+		# PSU_IOU_SLCR_MIO_PIN_27_L3_SEL                                                  0
+
+		# Configures MIO Pin 27 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18006C, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF18006C 0x000000FE 0x00000000
+		# Register : MIO_PIN_28 @ 0XFF180070

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[1]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_28_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
+		# PSU_IOU_SLCR_MIO_PIN_28_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc
+		# n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		# PSU_IOU_SLCR_MIO_PIN_28_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		# - (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_28_L3_SEL                                                  0
+
+		# Configures MIO Pin 28 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180070, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF180070 0x000000FE 0x00000000
+		# Register : MIO_PIN_29 @ 0XFF180074

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[2]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_29_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_29_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc
+		# n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		# t, dp_aux_data_out- (Dp Aux Data)
+		# PSU_IOU_SLCR_MIO_PIN_29_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0]
+		#  (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		# ) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_29_L3_SEL                                                  0
+
+		# Configures MIO Pin 29 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180074, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF180074 0x000000FE 0x00000000
+		# Register : MIO_PIN_30 @ 0XFF180078

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[3]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_30_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_30_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc
+		# n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		# PSU_IOU_SLCR_MIO_PIN_30_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can
+		# , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		#  3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_so
+		#  (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output
+		#  tracedq[8]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_30_L3_SEL                                                  0
+
+		# Configures MIO Pin 30 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180078, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF180078 0x000000FE 0x00000000
+		# Register : MIO_PIN_31 @ 0XFF18007C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_ctl- (TX RGMII control)
+		# PSU_IOU_SLCR_MIO_PIN_31_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_31_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[31]- (Test Sc
+		# n Port) = test_scan, Output, test_scan_out[31]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_31_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[5]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[5]- (GPIO bank 1) 1= can
+		# , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		# ) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi
+		# _si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial out
+		# ut) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_31_L3_SEL                                                  0
+
+		# Configures MIO Pin 31 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18007C, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF18007C 0x000000FE 0x00000000
+		# Register : MIO_PIN_32 @ 0XFF180080

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_clk- (RX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_32_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		# 
+		# PSU_IOU_SLCR_MIO_PIN_32_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[32]- (Test S
+		# an Port) = test_scan, Output, test_scan_out[32]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_32_L2_SEL                                                  1
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[6]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[6]- (GPIO bank 1) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi
+		# _sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= 
+		# race, Output, tracedq[10]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_32_L3_SEL                                                  0
+
+		# Configures MIO Pin 32 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180080, 0x000000FEU ,0x00000008U)  */
+    mask_write 0XFF180080 0x000000FE 0x00000008
+		# Register : MIO_PIN_33 @ 0XFF180084

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[0]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_33_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_33_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[33]- (Test S
+		# an Port) = test_scan, Output, test_scan_out[33]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		# PSU_IOU_SLCR_MIO_PIN_33_L2_SEL                                                  1
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[7]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[7]- (GPIO bank 1) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= t
+		# c3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, traced
+		# [11]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_33_L3_SEL                                                  0
+
+		# Configures MIO Pin 33 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180084, 0x000000FEU ,0x00000008U)  */
+    mask_write 0XFF180084 0x000000FE 0x00000008
+		# Register : MIO_PIN_34 @ 0XFF180088

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[1]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_34_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_34_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[34]- (Test S
+		# an Port) = test_scan, Output, test_scan_out[34]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		# ut, dp_aux_data_out- (Dp Aux Data)
+		# PSU_IOU_SLCR_MIO_PIN_34_L2_SEL                                                  1
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[8]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[8]- (GPIO bank 1) 1= can
+		# , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		#  3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc2
+		#  Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace P
+		# rt Databus)
+		# PSU_IOU_SLCR_MIO_PIN_34_L3_SEL                                                  0
+
+		# Configures MIO Pin 34 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180088, 0x000000FEU ,0x00000008U)  */
+    mask_write 0XFF180088 0x000000FE 0x00000008
+		# Register : MIO_PIN_35 @ 0XFF18008C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[2]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_35_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_35_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[35]- (Test S
+		# an Port) = test_scan, Output, test_scan_out[35]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		# PSU_IOU_SLCR_MIO_PIN_35_L2_SEL                                                  1
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[9]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[9]- (GPIO bank 1) 1= can
+		# , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		# ) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1,
+		# Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- 
+		# UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_35_L3_SEL                                                  0
+
+		# Configures MIO Pin 35 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18008C, 0x000000FEU ,0x00000008U)  */
+    mask_write 0XFF18008C 0x000000FE 0x00000008
+		# Register : MIO_PIN_36 @ 0XFF180090

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[3]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_36_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_36_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[36]- (Test S
+		# an Port) = test_scan, Output, test_scan_out[36]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		# ut, dp_aux_data_out- (Dp Aux Data)
+		# PSU_IOU_SLCR_MIO_PIN_36_L2_SEL                                                  1
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[10]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[10]- (GPIO bank 1) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		# so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		#  Output, tracedq[14]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_36_L3_SEL                                                  0
+
+		# Configures MIO Pin 36 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180090, 0x000000FEU ,0x00000008U)  */
+    mask_write 0XFF180090 0x000000FE 0x00000008
+		# Register : MIO_PIN_37 @ 0XFF180094

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_ctl- (RX RGMII control )
+		# PSU_IOU_SLCR_MIO_PIN_37_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		# PSU_IOU_SLCR_MIO_PIN_37_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[37]- (Test S
+		# an Port) = test_scan, Output, test_scan_out[37]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		# PSU_IOU_SLCR_MIO_PIN_37_L2_SEL                                                  1
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[11]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[11]- (GPIO bank 1) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		# 1_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		# 7= trace, Output, tracedq[15]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_37_L3_SEL                                                  0
+
+		# Configures MIO Pin 37 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180094, 0x000000FEU ,0x00000008U)  */
+    mask_write 0XFF180094 0x000000FE 0x00000008
+		# Register : MIO_PIN_38 @ 0XFF180098

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_clk- (TX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_38_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_38_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_38_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[12]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[12]- (GPIO bank 1) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clo
+		# k) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, trace_clk-
+		# (Trace Port Clock)
+		# PSU_IOU_SLCR_MIO_PIN_38_L3_SEL                                                  0
+
+		# Configures MIO Pin 38 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180098, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF180098 0x000000FE 0x00000000
+		# Register : MIO_PIN_39 @ 0XFF18009C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[0]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_39_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_39_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= sd1, Input, sd1_data_i
+		# [4]- (8-bit Data bus) = sd1, Output, sdio1_data_out[4]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_39_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[13]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[13]- (GPIO bank 1) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc0, Output, ttc0_wav
+		# _out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, trace_ctl- (Trace Port
+		# Control Signal)
+		# PSU_IOU_SLCR_MIO_PIN_39_L3_SEL                                                  0
+
+		# Configures MIO Pin 39 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18009C, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF18009C 0x000000FE 0x00000000
+		# Register : MIO_PIN_40 @ 0XFF1800A0

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[1]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_40_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_40_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		#  Indicator) 2= sd1, Input, sd1_data_in[5]- (8-bit Data bus) = sd1, Output, sdio1_data_out[5]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_40_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[14]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[14]- (GPIO bank 1) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc3, Input, ttc3_clk
+		# in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_40_L3_SEL                                                  0
+
+		# Configures MIO Pin 40 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800A0, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF1800A0 0x000000FE 0x00000000
+		# Register : MIO_PIN_41 @ 0XFF1800A4

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[2]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_41_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_41_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[6]- (8-bit Data bus) = sd1, Output, sdio1_data_out[6]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_41_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[15]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[15]- (GPIO bank 1) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[
+		# ]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial in
+		# ut) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_41_L3_SEL                                                  0
+
+		# Configures MIO Pin 41 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800A4, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF1800A4 0x000000FE 0x00000000
+		# Register : MIO_PIN_42 @ 0XFF1800A8

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[3]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_42_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_42_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[7]- (8-bit Data bus) = sd1, Output, sdio1_data_out[7]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_42_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[16]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[16]- (GPIO bank 1) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_
+		# o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		# t, tracedq[2]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_42_L3_SEL                                                  0
+
+		# Configures MIO Pin 42 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800A8, 0x000000FEU ,0x00000000U)  */
+    mask_write 0XFF1800A8 0x000000FE 0x00000000
+		# Register : MIO_PIN_43 @ 0XFF1800AC

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_ctl- (TX RGMII control)
+		# PSU_IOU_SLCR_MIO_PIN_43_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_43_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		# bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_43_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[17]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[17]- (GPIO bank 1) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, s
+		# i0_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		# tput) 7= trace, Output, tracedq[3]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_43_L3_SEL                                                  0
+
+		# Configures MIO Pin 43 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800AC, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800AC 0x000000FE 0x00000010
+		# Register : MIO_PIN_44 @ 0XFF1800B0

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_clk- (RX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_44_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_44_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		# bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_44_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[18]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[18]- (GPIO bank 1) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, s
+		# i1_sclk_out- (SPI Clock) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		#  Not Used
+		# PSU_IOU_SLCR_MIO_PIN_44_L3_SEL                                                  0
+
+		# Configures MIO Pin 44 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800B0, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800B0 0x000000FE 0x00000010
+		# Register : MIO_PIN_45 @ 0XFF1800B4

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[0]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_45_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_45_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		# bit Data bus) 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_45_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[19]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[19]- (GPIO bank 1) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5=
+		# ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_45_L3_SEL                                                  0
+
+		# Configures MIO Pin 45 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800B4, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800B4 0x000000FE 0x00000010
+		# Register : MIO_PIN_46 @ 0XFF1800B8

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[1]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_46_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_46_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_46_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[20]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[20]- (GPIO bank 1) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= tt
+		# 0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_46_L3_SEL                                                  0
+
+		# Configures MIO Pin 46 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800B8, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800B8 0x000000FE 0x00000010
+		# Register : MIO_PIN_47 @ 0XFF1800BC

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[2]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_47_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_47_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_47_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[21]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[21]- (GPIO bank 1) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi
+		# , Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		#  (UART transmitter serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_47_L3_SEL                                                  0
+
+		# Configures MIO Pin 47 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800BC, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800BC 0x000000FE 0x00000010
+		# Register : MIO_PIN_48 @ 0XFF1800C0

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[3]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_48_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_48_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_48_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[22]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[22]- (GPIO bank 1) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		# so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not U
+		# ed
+		# PSU_IOU_SLCR_MIO_PIN_48_L3_SEL                                                  0
+
+		# Configures MIO Pin 48 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800C0, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800C0 0x000000FE 0x00000010
+		# Register : MIO_PIN_49 @ 0XFF1800C4

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_ctl- (RX RGMII control )
+		# PSU_IOU_SLCR_MIO_PIN_49_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_49_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_data_in[3]- (8
+		# bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_49_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[23]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[23]- (GPIO bank 1) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		# 1_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		# 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_49_L3_SEL                                                  0
+
+		# Configures MIO Pin 49 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800C4, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800C4 0x000000FE 0x00000010
+		# Register : MIO_PIN_50 @ 0XFF1800C8

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
+		# PSU_IOU_SLCR_MIO_PIN_50_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_50_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Input, sd1_c
+		# d_in- (Command Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_50_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[24]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[24]- (GPIO bank 1) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= ttc2, Input, ttc2
+		# clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_50_L3_SEL                                                  0
+
+		# Configures MIO Pin 50 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800C8, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800C8 0x000000FE 0x00000010
+		# Register : MIO_PIN_51 @ 0XFF1800CC

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
+		# PSU_IOU_SLCR_MIO_PIN_51_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_51_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Output, sdio1_clk_out- (SDSDIO clock) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_51_L2_SEL                                                  2
+
+		# Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[25]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[25]- (GPIO bank 1) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= mdio1, Input, gem1_mdio_in- (MDIO Data) 4= mdio1, Outp
+		# t, gem1_mdio_out- (MDIO Data) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter
+		# serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_51_L3_SEL                                                  0
+
+		# Configures MIO Pin 51 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800CC, 0x000000FEU ,0x00000010U)  */
+    mask_write 0XFF1800CC 0x000000FE 0x00000010
+		# Register : MIO_PIN_52 @ 0XFF1800D0

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_clk- (TX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_52_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_clk_in- (ULPI Clock)
+		# PSU_IOU_SLCR_MIO_PIN_52_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_52_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[0]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[0]- (GPIO bank 2) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		# ) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		# lk- (Trace Port Clock)
+		# PSU_IOU_SLCR_MIO_PIN_52_L3_SEL                                                  0
+
+		# Configures MIO Pin 52 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800D0, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800D0 0x000000FE 0x00000004
+		# Register : MIO_PIN_53 @ 0XFF1800D4

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[0]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_53_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_dir- (Data bus direction control)
+		# PSU_IOU_SLCR_MIO_PIN_53_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_53_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[1]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[1]- (GPIO bank 2) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_o
+		# t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		# Signal)
+		# PSU_IOU_SLCR_MIO_PIN_53_L3_SEL                                                  0
+
+		# Configures MIO Pin 53 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800D4, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800D4 0x000000FE 0x00000004
+		# Register : MIO_PIN_54 @ 0XFF1800D8

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[1]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_54_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[2]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[2]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_54_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_54_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[2]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[2]- (GPIO bank 2) 1= can
+		# , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		#  3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_in
+		#  (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_54_L3_SEL                                                  0
+
+		# Configures MIO Pin 54 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800D8, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800D8 0x000000FE 0x00000004
+		# Register : MIO_PIN_55 @ 0XFF1800DC

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[2]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_55_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_nxt- (Data flow control signal from the PHY)
+		# PSU_IOU_SLCR_MIO_PIN_55_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_55_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[3]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[3]- (GPIO bank 2) 1= can
+		# , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		# ) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		# - (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		# output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_55_L3_SEL                                                  0
+
+		# Configures MIO Pin 55 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800DC, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800DC 0x000000FE 0x00000004
+		# Register : MIO_PIN_56 @ 0XFF1800E0

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[3]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_56_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[0]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[0]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_56_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_56_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[4]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[4]- (GPIO bank 2) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		# - (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		# utput, tracedq[2]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_56_L3_SEL                                                  0
+
+		# Configures MIO Pin 56 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800E0, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800E0 0x000000FE 0x00000004
+		# Register : MIO_PIN_57 @ 0XFF1800E4

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_ctl- (TX RGMII control)
+		# PSU_IOU_SLCR_MIO_PIN_57_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[1]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[1]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_57_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_57_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[5]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[5]- (GPIO bank 2) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		# si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		#  trace, Output, tracedq[3]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_57_L3_SEL                                                  0
+
+		# Configures MIO Pin 57 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800E4, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800E4 0x000000FE 0x00000004
+		# Register : MIO_PIN_58 @ 0XFF1800E8

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_clk- (RX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_58_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Output, usb0_ulpi_stp- (Asserted to end or interrupt transfers)
+		# PSU_IOU_SLCR_MIO_PIN_58_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_58_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[6]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[6]- (GPIO bank 2) 1= can
+		# , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		#  3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1_sclk_out- (SPI Clock
+		#  5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		# Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_58_L3_SEL                                                  0
+
+		# Configures MIO Pin 58 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800E8, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800E8 0x000000FE 0x00000004
+		# Register : MIO_PIN_59 @ 0XFF1800EC

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[0]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_59_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[3]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[3]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_59_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_59_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[7]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[7]- (GPIO bank 2) 1= can
+		# , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		# ) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		# ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		# atabus)
+		# PSU_IOU_SLCR_MIO_PIN_59_L3_SEL                                                  0
+
+		# Configures MIO Pin 59 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800EC, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800EC 0x000000FE 0x00000004
+		# Register : MIO_PIN_60 @ 0XFF1800F0

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[1]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_60_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[4]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[4]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_60_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_60_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[8]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[8]- (GPIO bank 2) 1= can
+		# , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		# ) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		# - (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_60_L3_SEL                                                  0
+
+		# Configures MIO Pin 60 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800F0, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800F0 0x000000FE 0x00000004
+		# Register : MIO_PIN_61 @ 0XFF1800F4

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[2]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_61_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[5]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[5]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_61_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_61_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[9]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[9]- (GPIO bank 2) 1= can
+		# , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		#  3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, Output, spi1_n_ss_out[0]
+		#  (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		# ) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_61_L3_SEL                                                  0
+
+		# Configures MIO Pin 61 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800F4, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800F4 0x000000FE 0x00000004
+		# Register : MIO_PIN_62 @ 0XFF1800F8

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[3]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_62_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[6]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[6]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_62_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_62_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[10]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[10]- (GPIO bank 2) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		# o- (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		# t, tracedq[8]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_62_L3_SEL                                                  0
+
+		# Configures MIO Pin 62 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800F8, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800F8 0x000000FE 0x00000004
+		# Register : MIO_PIN_63 @ 0XFF1800FC

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_ctl- (RX RGMII control )
+		# PSU_IOU_SLCR_MIO_PIN_63_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[7]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		# ata[7]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_63_L1_SEL                                                  1
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_63_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[11]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[11]- (GPIO bank 2) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		# i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		# tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_63_L3_SEL                                                  0
+
+		# Configures MIO Pin 63 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF1800FC, 0x000000FEU ,0x00000004U)  */
+    mask_write 0XFF1800FC 0x000000FE 0x00000004
+		# Register : MIO_PIN_64 @ 0XFF180100

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_clk- (TX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_64_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_clk_in- (ULPI Clock)
+		# PSU_IOU_SLCR_MIO_PIN_64_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_64_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[12]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[12]- (GPIO bank 2) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, s
+		# i0_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		#  trace, Output, tracedq[10]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_64_L3_SEL                                                  0
+
+		# Configures MIO Pin 64 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180100, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180100 0x000000FE 0x00000002
+		# Register : MIO_PIN_65 @ 0XFF180104

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[0]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_65_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_dir- (Data bus direction control)
+		# PSU_IOU_SLCR_MIO_PIN_65_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_65_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[13]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[13]- (GPIO bank 2) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5=
+		# ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trac
+		# dq[11]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_65_L3_SEL                                                  0
+
+		# Configures MIO Pin 65 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180104, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180104 0x000000FE 0x00000002
+		# Register : MIO_PIN_66 @ 0XFF180108

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[1]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_66_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[2]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[2]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_66_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		#  Indicator) 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_66_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[14]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[14]- (GPIO bank 2) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= tt
+		# 2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace
+		# Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_66_L3_SEL                                                  0
+
+		# Configures MIO Pin 66 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180108, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180108 0x000000FE 0x00000002
+		# Register : MIO_PIN_67 @ 0XFF18010C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[2]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_67_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_nxt- (Data flow control signal from the PHY)
+		# PSU_IOU_SLCR_MIO_PIN_67_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		# bit Data bus) 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_67_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[15]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[15]- (GPIO bank 2) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi
+		# , Output, spi0_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		#  (UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_67_L3_SEL                                                  0
+
+		# Configures MIO Pin 67 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18010C, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF18010C 0x000000FE 0x00000002
+		# Register : MIO_PIN_68 @ 0XFF180110

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[3]- (TX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_68_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[0]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[0]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_68_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		# bit Data bus) 2= Not Used 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_68_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[16]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[16]- (GPIO bank 2) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		# so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		#  Output, tracedq[14]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_68_L3_SEL                                                  0
+
+		# Configures MIO Pin 68 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180110, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180110 0x000000FE 0x00000002
+		# Register : MIO_PIN_69 @ 0XFF180114

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_ctl- (TX RGMII control)
+		# PSU_IOU_SLCR_MIO_PIN_69_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[1]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[1]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_69_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		# bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_69_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[17]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[17]- (GPIO bank 2) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		# 0_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		# 7= trace, Output, tracedq[15]- (Trace Port Databus)
+		# PSU_IOU_SLCR_MIO_PIN_69_L3_SEL                                                  0
+
+		# Configures MIO Pin 69 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180114, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180114 0x000000FE 0x00000002
+		# Register : MIO_PIN_70 @ 0XFF180118

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_clk- (RX RGMII clock)
+		# PSU_IOU_SLCR_MIO_PIN_70_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Output, usb1_ulpi_stp- (Asserted to end or interrupt transfers)
+		# PSU_IOU_SLCR_MIO_PIN_70_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		# bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_70_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[18]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[18]- (GPIO bank 2) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		# 1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		# sed
+		# PSU_IOU_SLCR_MIO_PIN_70_L3_SEL                                                  0
+
+		# Configures MIO Pin 70 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180118, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180118 0x000000FE 0x00000002
+		# Register : MIO_PIN_71 @ 0XFF18011C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[0]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_71_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[3]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[3]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_71_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_71_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[19]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[19]- (GPIO bank 2) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		#  ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_71_L3_SEL                                                  0
+
+		# Configures MIO Pin 71 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18011C, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF18011C 0x000000FE 0x00000002
+		# Register : MIO_PIN_72 @ 0XFF180120

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[1]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_72_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[4]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[4]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_72_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_72_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[20]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[20]- (GPIO bank 2) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= N
+		# t Used 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_72_L3_SEL                                                  0
+
+		# Configures MIO Pin 72 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180120, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180120 0x000000FE 0x00000002
+		# Register : MIO_PIN_73 @ 0XFF180124

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[2]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_73_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[5]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[5]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_73_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_73_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[21]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[21]- (GPIO bank 2) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		#  Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= Not Used 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_73_L3_SEL                                                  0
+
+		# Configures MIO Pin 73 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180124, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180124 0x000000FE 0x00000002
+		# Register : MIO_PIN_74 @ 0XFF180128

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[3]- (RX RGMII data)
+		# PSU_IOU_SLCR_MIO_PIN_74_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[6]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[6]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_74_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		# bit Data bus) 2= sd1, Input, sd1_data_in[3]- (8-bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_74_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[22]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[22]- (GPIO bank 2) 1= c
+		# n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		# l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		# o- (MISO signal) 5= Not Used 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_74_L3_SEL                                                  0
+
+		# Configures MIO Pin 74 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180128, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF180128 0x000000FE 0x00000002
+		# Register : MIO_PIN_75 @ 0XFF18012C

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_ctl- (RX RGMII control )
+		# PSU_IOU_SLCR_MIO_PIN_75_L0_SEL                                                  1
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[7]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		# ata[7]- (ULPI data bus)
+		# PSU_IOU_SLCR_MIO_PIN_75_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_cmd_in- (Comma
+		# d Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_75_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[23]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[23]- (GPIO bank 2) 1= c
+		# n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		# al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		# i1_si- (MOSI signal) 5= Not Used 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_75_L3_SEL                                                  0
+
+		# Configures MIO Pin 75 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF18012C, 0x000000FEU ,0x00000002U)  */
+    mask_write 0XFF18012C 0x000000FE 0x00000002
+		# Register : MIO_PIN_76 @ 0XFF180130

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_76_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_76_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Output, sdio
+		# _clk_out- (SDSDIO clock) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_76_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[24]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[24]- (GPIO bank 2) 1= c
+		# n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		# al) 3= mdio0, Output, gem0_mdc- (MDIO Clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= mdio2, Output, gem2_mdc- (MDIO Clock
+		#  6= mdio3, Output, gem3_mdc- (MDIO Clock) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_76_L3_SEL                                                  6
+
+		# Configures MIO Pin 76 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180130, 0x000000FEU ,0x000000C0U)  */
+    mask_write 0XFF180130 0x000000FE 0x000000C0
+		# Register : MIO_PIN_77 @ 0XFF180134

+
+		# Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_77_L0_SEL                                                  0
+
+		# Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_77_L1_SEL                                                  0
+
+		# Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_77_L2_SEL                                                  0
+
+		# Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[25]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[25]- (GPIO bank 2) 1= c
+		# n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		# l) 3= mdio0, Input, gem0_mdio_in- (MDIO Data) 3= mdio0, Output, gem0_mdio_out- (MDIO Data) 4= mdio1, Input, gem1_mdio_in- (MD
+		# O Data) 4= mdio1, Output, gem1_mdio_out- (MDIO Data) 5= mdio2, Input, gem2_mdio_in- (MDIO Data) 5= mdio2, Output, gem2_mdio_o
+		# t- (MDIO Data) 6= mdio3, Input, gem3_mdio_in- (MDIO Data) 6= mdio3, Output, gem3_mdio_out- (MDIO Data) 7= Not Used
+		# PSU_IOU_SLCR_MIO_PIN_77_L3_SEL                                                  6
+
+		# Configures MIO Pin 77 peripheral interface mapping
+		#(OFFSET, MASK, VALUE)      (0XFF180134, 0x000000FEU ,0x000000C0U)  */
+    mask_write 0XFF180134 0x000000FE 0x000000C0
+		# Register : MIO_MST_TRI0 @ 0XFF180204

+
+		# Master Tri-state Enable for pin 0, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI                                            0
+
+		# Master Tri-state Enable for pin 1, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI                                            0
+
+		# Master Tri-state Enable for pin 2, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI                                            0
+
+		# Master Tri-state Enable for pin 3, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI                                            0
+
+		# Master Tri-state Enable for pin 4, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI                                            0
+
+		# Master Tri-state Enable for pin 5, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI                                            0
+
+		# Master Tri-state Enable for pin 6, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI                                            0
+
+		# Master Tri-state Enable for pin 7, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI                                            0
+
+		# Master Tri-state Enable for pin 8, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI                                            0
+
+		# Master Tri-state Enable for pin 9, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI                                            0
+
+		# Master Tri-state Enable for pin 10, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI                                            0
+
+		# Master Tri-state Enable for pin 11, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI                                            0
+
+		# Master Tri-state Enable for pin 12, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI                                            0
+
+		# Master Tri-state Enable for pin 13, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI                                            0
+
+		# Master Tri-state Enable for pin 14, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI                                            0
+
+		# Master Tri-state Enable for pin 15, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI                                            0
+
+		# Master Tri-state Enable for pin 16, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI                                            0
+
+		# Master Tri-state Enable for pin 17, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI                                            0
+
+		# Master Tri-state Enable for pin 18, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI                                            1
+
+		# Master Tri-state Enable for pin 19, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI                                            0
+
+		# Master Tri-state Enable for pin 20, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI                                            0
+
+		# Master Tri-state Enable for pin 21, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI                                            1
+
+		# Master Tri-state Enable for pin 22, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI                                            0
+
+		# Master Tri-state Enable for pin 23, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI                                            0
+
+		# Master Tri-state Enable for pin 24, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI                                            0
+
+		# Master Tri-state Enable for pin 25, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI                                            1
+
+		# Master Tri-state Enable for pin 26, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI                                            1
+
+		# Master Tri-state Enable for pin 27, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI                                            0
+
+		# Master Tri-state Enable for pin 28, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI                                            0
+
+		# Master Tri-state Enable for pin 29, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI                                            0
+
+		# Master Tri-state Enable for pin 30, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI                                            0
+
+		# Master Tri-state Enable for pin 31, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI                                            0
+
+		# MIO pin Tri-state Enables, 31:0
+		#(OFFSET, MASK, VALUE)      (0XFF180204, 0xFFFFFFFFU ,0x06240000U)  */
+    mask_write 0XFF180204 0xFFFFFFFF 0x06240000
+		# Register : MIO_MST_TRI1 @ 0XFF180208

+
+		# Master Tri-state Enable for pin 32, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI                                            0
+
+		# Master Tri-state Enable for pin 33, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI                                            0
+
+		# Master Tri-state Enable for pin 34, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI                                            0
+
+		# Master Tri-state Enable for pin 35, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI                                            0
+
+		# Master Tri-state Enable for pin 36, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI                                            0
+
+		# Master Tri-state Enable for pin 37, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI                                            0
+
+		# Master Tri-state Enable for pin 38, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI                                            0
+
+		# Master Tri-state Enable for pin 39, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI                                            0
+
+		# Master Tri-state Enable for pin 40, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI                                            0
+
+		# Master Tri-state Enable for pin 41, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI                                            0
+
+		# Master Tri-state Enable for pin 42, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI                                            0
+
+		# Master Tri-state Enable for pin 43, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI                                            0
+
+		# Master Tri-state Enable for pin 44, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI                                            1
+
+		# Master Tri-state Enable for pin 45, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI                                            1
+
+		# Master Tri-state Enable for pin 46, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI                                            0
+
+		# Master Tri-state Enable for pin 47, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI                                            0
+
+		# Master Tri-state Enable for pin 48, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI                                            0
+
+		# Master Tri-state Enable for pin 49, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI                                            0
+
+		# Master Tri-state Enable for pin 50, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI                                            0
+
+		# Master Tri-state Enable for pin 51, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI                                            0
+
+		# Master Tri-state Enable for pin 52, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI                                            1
+
+		# Master Tri-state Enable for pin 53, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI                                            1
+
+		# Master Tri-state Enable for pin 54, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI                                            0
+
+		# Master Tri-state Enable for pin 55, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI                                            1
+
+		# Master Tri-state Enable for pin 56, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI                                            0
+
+		# Master Tri-state Enable for pin 57, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI                                            0
+
+		# Master Tri-state Enable for pin 58, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI                                            0
+
+		# Master Tri-state Enable for pin 59, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI                                            0
+
+		# Master Tri-state Enable for pin 60, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI                                            0
+
+		# Master Tri-state Enable for pin 61, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI                                            0
+
+		# Master Tri-state Enable for pin 62, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI                                            0
+
+		# Master Tri-state Enable for pin 63, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI                                            0
+
+		# MIO pin Tri-state Enables, 63:32
+		#(OFFSET, MASK, VALUE)      (0XFF180208, 0xFFFFFFFFU ,0x00B03000U)  */
+    mask_write 0XFF180208 0xFFFFFFFF 0x00B03000
+		# Register : MIO_MST_TRI2 @ 0XFF18020C

+
+		# Master Tri-state Enable for pin 64, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI                                            0
+
+		# Master Tri-state Enable for pin 65, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI                                            0
+
+		# Master Tri-state Enable for pin 66, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI                                            0
+
+		# Master Tri-state Enable for pin 67, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI                                            0
+
+		# Master Tri-state Enable for pin 68, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI                                            0
+
+		# Master Tri-state Enable for pin 69, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI                                            0
+
+		# Master Tri-state Enable for pin 70, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI                                            1
+
+		# Master Tri-state Enable for pin 71, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI                                            1
+
+		# Master Tri-state Enable for pin 72, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI                                            1
+
+		# Master Tri-state Enable for pin 73, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI                                            1
+
+		# Master Tri-state Enable for pin 74, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI                                            1
+
+		# Master Tri-state Enable for pin 75, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI                                            1
+
+		# Master Tri-state Enable for pin 76, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI                                            0
+
+		# Master Tri-state Enable for pin 77, active high
+		# PSU_IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI                                            0
+
+		# MIO pin Tri-state Enables, 77:64
+		#(OFFSET, MASK, VALUE)      (0XFF18020C, 0x00003FFFU ,0x00000FC0U)  */
+    mask_write 0XFF18020C 0x00003FFF 0x00000FC0
+		# Register : bank0_ctrl0 @ 0XFF180138

+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25                                          1
+
+		# Drive0 control to MIO Bank 0 - control MIO[25:0]
+		#(OFFSET, MASK, VALUE)      (0XFF180138, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180138 0x03FFFFFF 0x03FFFFFF
+		# Register : bank0_ctrl1 @ 0XFF18013C

+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25                                          1
+
+		# Drive1 control to MIO Bank 0 - control MIO[25:0]
+		#(OFFSET, MASK, VALUE)      (0XFF18013C, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF18013C 0x03FFFFFF 0x03FFFFFF
+		# Register : bank0_ctrl3 @ 0XFF180140

+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		# Selects either Schmitt or CMOS input for MIO Bank 0 - control MIO[25:0]
+		#(OFFSET, MASK, VALUE)      (0XFF180140, 0x03FFFFFFU ,0x00000000U)  */
+    mask_write 0XFF180140 0x03FFFFFF 0x00000000
+		# Register : bank0_ctrl4 @ 0XFF180144

+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		# When mio_bank0_pull_enable is set, this selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
+		#(OFFSET, MASK, VALUE)      (0XFF180144, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180144 0x03FFFFFF 0x03FFFFFF
+		# Register : bank0_ctrl5 @ 0XFF180148

+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		# When set, this enables mio_bank0_pullupdown to selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
+		#(OFFSET, MASK, VALUE)      (0XFF180148, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180148 0x03FFFFFF 0x03FFFFFF
+		# Register : bank0_ctrl6 @ 0XFF18014C

+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[0].
+		# PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		# Slew rate control to MIO Bank 0 - control MIO[25:0]
+		#(OFFSET, MASK, VALUE)      (0XFF18014C, 0x03FFFFFFU ,0x00000000U)  */
+    mask_write 0XFF18014C 0x03FFFFFF 0x00000000
+		# Register : bank1_ctrl0 @ 0XFF180154

+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25                                          1
+
+		# Drive0 control to MIO Bank 1 - control MIO[51:26]
+		#(OFFSET, MASK, VALUE)      (0XFF180154, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180154 0x03FFFFFF 0x03FFFFFF
+		# Register : bank1_ctrl1 @ 0XFF180158

+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25                                          1
+
+		# Drive1 control to MIO Bank 1 - control MIO[51:26]
+		#(OFFSET, MASK, VALUE)      (0XFF180158, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180158 0x03FFFFFF 0x03FFFFFF
+		# Register : bank1_ctrl3 @ 0XFF18015C

+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		# Selects either Schmitt or CMOS input for MIO Bank 1 - control MIO[51:26]
+		#(OFFSET, MASK, VALUE)      (0XFF18015C, 0x03FFFFFFU ,0x00000000U)  */
+    mask_write 0XFF18015C 0x03FFFFFF 0x00000000
+		# Register : bank1_ctrl4 @ 0XFF180160

+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		# When mio_bank1_pull_enable is set, this selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
+		#(OFFSET, MASK, VALUE)      (0XFF180160, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180160 0x03FFFFFF 0x03FFFFFF
+		# Register : bank1_ctrl5 @ 0XFF180164

+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		# When set, this enables mio_bank1_pullupdown to selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
+		#(OFFSET, MASK, VALUE)      (0XFF180164, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180164 0x03FFFFFF 0x03FFFFFF
+		# Register : bank1_ctrl6 @ 0XFF180168

+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[26].
+		# PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		# Slew rate control to MIO Bank 1 - control MIO[51:26]
+		#(OFFSET, MASK, VALUE)      (0XFF180168, 0x03FFFFFFU ,0x00000000U)  */
+    mask_write 0XFF180168 0x03FFFFFF 0x00000000
+		# Register : bank2_ctrl0 @ 0XFF180170

+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25                                          1
+
+		# Drive0 control to MIO Bank 2 - control MIO[77:52]
+		#(OFFSET, MASK, VALUE)      (0XFF180170, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180170 0x03FFFFFF 0x03FFFFFF
+		# Register : bank2_ctrl1 @ 0XFF180174

+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9                                           1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24                                          1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25                                          1
+
+		# Drive1 control to MIO Bank 2 - control MIO[77:52]
+		#(OFFSET, MASK, VALUE)      (0XFF180174, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180174 0x03FFFFFF 0x03FFFFFF
+		# Register : bank2_ctrl3 @ 0XFF180178

+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		# Selects either Schmitt or CMOS input for MIO Bank 2 - control MIO[77:52]
+		#(OFFSET, MASK, VALUE)      (0XFF180178, 0x03FFFFFFU ,0x00000000U)  */
+    mask_write 0XFF180178 0x03FFFFFF 0x00000000
+		# Register : bank2_ctrl4 @ 0XFF18017C

+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		# When mio_bank2_pull_enable is set, this selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
+		#(OFFSET, MASK, VALUE)      (0XFF18017C, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF18017C 0x03FFFFFF 0x03FFFFFF
+		# Register : bank2_ctrl5 @ 0XFF180180

+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		# When set, this enables mio_bank2_pullupdown to selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
+		#(OFFSET, MASK, VALUE)      (0XFF180180, 0x03FFFFFFU ,0x03FFFFFFU)  */
+    mask_write 0XFF180180 0x03FFFFFF 0x03FFFFFF
+		# Register : bank2_ctrl6 @ 0XFF180184

+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		# Each bit applies to a single IO. Bit 0 for MIO[52].
+		# PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		# Slew rate control to MIO Bank 2 - control MIO[77:52]
+		#(OFFSET, MASK, VALUE)      (0XFF180184, 0x03FFFFFFU ,0x00000000U)  */
+    mask_write 0XFF180184 0x03FFFFFF 0x00000000
+		# : LOOPBACK
+		# Register : MIO_LOOPBACK @ 0XFF180200

+
+		# I2C Loopback Control. 0 = Connect I2C inputs according to MIO mapping. 1 = Loop I2C 0 outputs to I2C 1 inputs, and I2C 1 outp
+		# ts to I2C 0 inputs.
+		# PSU_IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1                                        0
+
+		# CAN Loopback Control. 0 = Connect CAN inputs according to MIO mapping. 1 = Loop CAN 0 Tx to CAN 1 Rx, and CAN 1 Tx to CAN 0 R
+		# .
+		# PSU_IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1                                        0
+
+		# UART Loopback Control. 0 = Connect UART inputs according to MIO mapping. 1 = Loop UART 0 outputs to UART 1 inputs, and UART 1
+		# outputs to UART 0 inputs. RXD/TXD cross-connected. RTS/CTS cross-connected. DSR, DTR, DCD and RI not used.
+		# PSU_IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1                                          0
+
+		# SPI Loopback Control. 0 = Connect SPI inputs according to MIO mapping. 1 = Loop SPI 0 outputs to SPI 1 inputs, and SPI 1 outp
+		# ts to SPI 0 inputs. The other SPI core will appear on the LS Slave Select.
+		# PSU_IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1                                        0
+
+		# Loopback function within MIO
+		#(OFFSET, MASK, VALUE)      (0XFF180200, 0x0000000FU ,0x00000000U)  */
+    mask_write 0XFF180200 0x0000000F 0x00000000
+}
+
+set psu_peripherals_init_data {
+		# : RESET BLOCKS
+		# : ENET
+		# Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		# GEM 3 reset
+		# PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0
+
+		# Software controlled reset for the GEMs
+		#(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFF5E0230 0x00000008 0x00000000
+		# : QSPI
+		# Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_QSPI_RESET                                             0
+
+		# Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000001U ,0x00000000U)  */
+    mask_write 0XFF5E0238 0x00000001 0x00000000
+		# : NAND
+		# : USB
+		# Register : RST_LPD_TOP @ 0XFF5E023C

+
+		# USB 0 reset for control registers
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0
+
+		# USB 0 sleep circuit reset
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0
+
+		# USB 0 reset
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0
+
+		# Software control register for the LPD block.
+		#(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000000U)  */
+    mask_write 0XFF5E023C 0x00000540 0x00000000
+		# : FPD RESET
+		# Register : RST_FPD_TOP @ 0XFD1A0100

+
+		# PCIE config reset
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0
+
+		# PCIE control block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0
+
+		# PCIE bridge block level reset (AXI interface)
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0
+
+		# Display Port block level reset (includes DPDMA)
+		# PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0
+
+		# FPD WDT reset
+		# PSU_CRF_APB_RST_FPD_TOP_SWDT_RESET                                              0
+
+		# GDMA block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_GDMA_RESET                                              0
+
+		# Pixel Processor (submodule of GPU) block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_GPU_PP0_RESET                                           0
+
+		# Pixel Processor (submodule of GPU) block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_GPU_PP1_RESET                                           0
+
+		# GPU block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_GPU_RESET                                               0
+
+		# GT block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_GT_RESET                                                0
+
+		# Sata block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0
+
+		# FPD Block level software controlled reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000F807EU ,0x00000000U)  */
+    mask_write 0XFD1A0100 0x000F807E 0x00000000
+		# : SD
+		# Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_SDIO1_RESET                                            0
+
+		# Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000040U ,0x00000000U)  */
+    mask_write 0XFF5E0238 0x00000040 0x00000000
+		# Register : CTRL_REG_SD @ 0XFF180310

+
+		# SD or eMMC selection on SDIO1 0: SD enabled 1: eMMC enabled
+		# PSU_IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL                                           0
+
+		# SD eMMC selection
+		#(OFFSET, MASK, VALUE)      (0XFF180310, 0x00008000U ,0x00000000U)  */
+    mask_write 0XFF180310 0x00008000 0x00000000
+		# Register : SD_CONFIG_REG2 @ 0XFF180320

+
+		# Should be set based on the final product usage 00 - Removable SCard Slot 01 - Embedded Slot for One Device 10 - Shared Bus Sl
+		# t 11 - Reserved
+		# PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE                                        0
+
+		# 1.8V Support 1: 1.8V supported 0: 1.8V not supported support
+		# PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V                                            0
+
+		# 3.0V Support 1: 3.0V supported 0: 3.0V not supported support
+		# PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V                                            0
+
+		# 3.3V Support 1: 3.3V supported 0: 3.3V not supported support
+		# PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V                                            1
+
+		# SD Config Register 2
+		#(OFFSET, MASK, VALUE)      (0XFF180320, 0x33800000U ,0x00800000U)  */
+    mask_write 0XFF180320 0x33800000 0x00800000
+		# : SD1 BASE CLOCK
+		# Register : SD_CONFIG_REG1 @ 0XFF18031C

+
+		# Base Clock Frequency for SD Clock. This is the frequency of the xin_clk.
+		# PSU_IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK                                         0xc7
+
+		# SD Config Register 1
+		#(OFFSET, MASK, VALUE)      (0XFF18031C, 0x7F800000U ,0x63800000U)  */
+    mask_write 0XFF18031C 0x7F800000 0x63800000
+		# : CAN
+		# Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_CAN1_RESET                                             0
+
+		# Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000100U ,0x00000000U)  */
+    mask_write 0XFF5E0238 0x00000100 0x00000000
+		# : I2C
+		# Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_I2C0_RESET                                             0
+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_I2C1_RESET                                             0
+
+		# Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000600U ,0x00000000U)  */
+    mask_write 0XFF5E0238 0x00000600 0x00000000
+		# : SWDT
+		# Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_SWDT_RESET                                             0
+
+		# Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00008000U ,0x00000000U)  */
+    mask_write 0XFF5E0238 0x00008000 0x00000000
+		# : SPI
+		# : TTC
+		# Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_TTC0_RESET                                             0
+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_TTC1_RESET                                             0
+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_TTC2_RESET                                             0
+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_TTC3_RESET                                             0
+
+		# Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00007800U ,0x00000000U)  */
+    mask_write 0XFF5E0238 0x00007800 0x00000000
+		# : UART
+		# Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_UART0_RESET                                            0
+
+		# Block level reset
+		# PSU_CRL_APB_RST_LPD_IOU2_UART1_RESET                                            0
+
+		# Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		#(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000006U ,0x00000000U)  */
+    mask_write 0XFF5E0238 0x00000006 0x00000000
+		# : UART BAUD RATE
+		# Register : Baud_rate_divider_reg0 @ 0XFF000034

+
+		# Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
+		# PSU_UART0_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5
+
+		# Baud Rate Divider Register
+		#(OFFSET, MASK, VALUE)      (0XFF000034, 0x000000FFU ,0x00000005U)  */
+    mask_write 0XFF000034 0x000000FF 0x00000005
+		# Register : Baud_rate_gen_reg0 @ 0XFF000018

+
+		# Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
+		# PSU_UART0_BAUD_RATE_GEN_REG0_CD                                                 0x8f
+
+		# Baud Rate Generator Register.
+		#(OFFSET, MASK, VALUE)      (0XFF000018, 0x0000FFFFU ,0x0000008FU)  */
+    mask_write 0XFF000018 0x0000FFFF 0x0000008F
+		# Register : Control_reg0 @ 0XFF000000

+
+		# Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		# high level during 12 bit periods. It can be set regardless of the value of STTBRK.
+		# PSU_UART0_CONTROL_REG0_STPBRK                                                   0x0
+
+		# Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		# transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
+		# PSU_UART0_CONTROL_REG0_STTBRK                                                   0x0
+
+		# Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		# pleted.
+		# PSU_UART0_CONTROL_REG0_RSTTO                                                    0x0
+
+		# Transmit disable: 0: enable transmitter 1: disable transmitter
+		# PSU_UART0_CONTROL_REG0_TXDIS                                                    0x0
+
+		# Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
+		# PSU_UART0_CONTROL_REG0_TXEN                                                     0x1
+
+		# Receive disable: 0: enable 1: disable, regardless of the value of RXEN
+		# PSU_UART0_CONTROL_REG0_RXDIS                                                    0x0
+
+		# Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
+		# PSU_UART0_CONTROL_REG0_RXEN                                                     0x1
+
+		# Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		#  bit is self clearing once the reset has completed.
+		# PSU_UART0_CONTROL_REG0_TXRES                                                    0x1
+
+		# Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		# is self clearing once the reset has completed.
+		# PSU_UART0_CONTROL_REG0_RXRES                                                    0x1
+
+		# UART Control Register
+		#(OFFSET, MASK, VALUE)      (0XFF000000, 0x000001FFU ,0x00000017U)  */
+    mask_write 0XFF000000 0x000001FF 0x00000017
+		# Register : mode_reg0 @ 0XFF000004

+
+		# Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
+		# PSU_UART0_MODE_REG0_CHMODE                                                      0x0
+
+		# Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		# stop bits 10: 2 stop bits 11: reserved
+		# PSU_UART0_MODE_REG0_NBSTOP                                                      0x0
+
+		# Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		# 01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
+		# PSU_UART0_MODE_REG0_PAR                                                         0x4
+
+		# Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
+		# PSU_UART0_MODE_REG0_CHRL                                                        0x0
+
+		# Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		# source is uart_ref_clk 1: clock source is uart_ref_clk/8
+		# PSU_UART0_MODE_REG0_CLKS                                                        0x0
+
+		# UART Mode Register
+		#(OFFSET, MASK, VALUE)      (0XFF000004, 0x000003FFU ,0x00000020U)  */
+    mask_write 0XFF000004 0x000003FF 0x00000020
+		# Register : Baud_rate_divider_reg0 @ 0XFF010034

+
+		# Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
+		# PSU_UART1_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5
+
+		# Baud Rate Divider Register
+		#(OFFSET, MASK, VALUE)      (0XFF010034, 0x000000FFU ,0x00000005U)  */
+    mask_write 0XFF010034 0x000000FF 0x00000005
+		# Register : Baud_rate_gen_reg0 @ 0XFF010018

+
+		# Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
+		# PSU_UART1_BAUD_RATE_GEN_REG0_CD                                                 0x8f
+
+		# Baud Rate Generator Register.
+		#(OFFSET, MASK, VALUE)      (0XFF010018, 0x0000FFFFU ,0x0000008FU)  */
+    mask_write 0XFF010018 0x0000FFFF 0x0000008F
+		# Register : Control_reg0 @ 0XFF010000

+
+		# Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		# high level during 12 bit periods. It can be set regardless of the value of STTBRK.
+		# PSU_UART1_CONTROL_REG0_STPBRK                                                   0x0
+
+		# Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		# transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
+		# PSU_UART1_CONTROL_REG0_STTBRK                                                   0x0
+
+		# Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		# pleted.
+		# PSU_UART1_CONTROL_REG0_RSTTO                                                    0x0
+
+		# Transmit disable: 0: enable transmitter 1: disable transmitter
+		# PSU_UART1_CONTROL_REG0_TXDIS                                                    0x0
+
+		# Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
+		# PSU_UART1_CONTROL_REG0_TXEN                                                     0x1
+
+		# Receive disable: 0: enable 1: disable, regardless of the value of RXEN
+		# PSU_UART1_CONTROL_REG0_RXDIS                                                    0x0
+
+		# Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
+		# PSU_UART1_CONTROL_REG0_RXEN                                                     0x1
+
+		# Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		#  bit is self clearing once the reset has completed.
+		# PSU_UART1_CONTROL_REG0_TXRES                                                    0x1
+
+		# Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		# is self clearing once the reset has completed.
+		# PSU_UART1_CONTROL_REG0_RXRES                                                    0x1
+
+		# UART Control Register
+		#(OFFSET, MASK, VALUE)      (0XFF010000, 0x000001FFU ,0x00000017U)  */
+    mask_write 0XFF010000 0x000001FF 0x00000017
+		# Register : mode_reg0 @ 0XFF010004

+
+		# Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
+		# PSU_UART1_MODE_REG0_CHMODE                                                      0x0
+
+		# Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		# stop bits 10: 2 stop bits 11: reserved
+		# PSU_UART1_MODE_REG0_NBSTOP                                                      0x0
+
+		# Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		# 01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
+		# PSU_UART1_MODE_REG0_PAR                                                         0x4
+
+		# Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
+		# PSU_UART1_MODE_REG0_CHRL                                                        0x0
+
+		# Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		# source is uart_ref_clk 1: clock source is uart_ref_clk/8
+		# PSU_UART1_MODE_REG0_CLKS                                                        0x0
+
+		# UART Mode Register
+		#(OFFSET, MASK, VALUE)      (0XFF010004, 0x000003FFU ,0x00000020U)  */
+    mask_write 0XFF010004 0x000003FF 0x00000020
+		# : GPIO
+		# : ADMA TZ
+		# Register : slcr_adma @ 0XFF4B0024

+
+		# TrustZone Classification for ADMA
+		# PSU_LPD_SLCR_SECURE_SLCR_ADMA_TZ                                                0XFF
+
+		# RPU TrustZone settings
+		#(OFFSET, MASK, VALUE)      (0XFF4B0024, 0x000000FFU ,0x000000FFU)  */
+    mask_write 0XFF4B0024 0x000000FF 0x000000FF
+		# : CSU TAMPERING
+		# : CSU TAMPER STATUS
+		# Register : tamper_status @ 0XFFCA5000

+
+		# CSU regsiter
+		# PSU_CSU_TAMPER_STATUS_TAMPER_0                                                  0
+
+		# External MIO
+		# PSU_CSU_TAMPER_STATUS_TAMPER_1                                                  0
+
+		# JTAG toggle detect
+		# PSU_CSU_TAMPER_STATUS_TAMPER_2                                                  0
+
+		# PL SEU error
+		# PSU_CSU_TAMPER_STATUS_TAMPER_3                                                  0
+
+		# AMS over temperature alarm for LPD
+		# PSU_CSU_TAMPER_STATUS_TAMPER_4                                                  0
+
+		# AMS over temperature alarm for APU
+		# PSU_CSU_TAMPER_STATUS_TAMPER_5                                                  0
+
+		# AMS voltage alarm for VCCPINT_FPD
+		# PSU_CSU_TAMPER_STATUS_TAMPER_6                                                  0
+
+		# AMS voltage alarm for VCCPINT_LPD
+		# PSU_CSU_TAMPER_STATUS_TAMPER_7                                                  0
+
+		# AMS voltage alarm for VCCPAUX
+		# PSU_CSU_TAMPER_STATUS_TAMPER_8                                                  0
+
+		# AMS voltage alarm for DDRPHY
+		# PSU_CSU_TAMPER_STATUS_TAMPER_9                                                  0
+
+		# AMS voltage alarm for PSIO bank 0/1/2
+		# PSU_CSU_TAMPER_STATUS_TAMPER_10                                                 0
+
+		# AMS voltage alarm for PSIO bank 3 (dedicated pins)
+		# PSU_CSU_TAMPER_STATUS_TAMPER_11                                                 0
+
+		# AMS voltaage alarm for GT
+		# PSU_CSU_TAMPER_STATUS_TAMPER_12                                                 0
+
+		# Tamper Response Status
+		#(OFFSET, MASK, VALUE)      (0XFFCA5000, 0x00001FFFU ,0x00000000U)  */
+    mask_write 0XFFCA5000 0x00001FFF 0x00000000
+		# : CSU TAMPER RESPONSE
+		# : AFIFM INTERFACE WIDTH
+		# : CPU QOS DEFAULT
+		# Register : ACE_CTRL @ 0XFD5C0060

+
+		# Set ACE outgoing AWQOS value
+		# PSU_APU_ACE_CTRL_AWQOS                                                          0X0
+
+		# Set ACE outgoing ARQOS value
+		# PSU_APU_ACE_CTRL_ARQOS                                                          0X0
+
+		# ACE Control Register
+		#(OFFSET, MASK, VALUE)      (0XFD5C0060, 0x000F000FU ,0x00000000U)  */
+    mask_write 0XFD5C0060 0x000F000F 0x00000000
+		# : ENABLES RTC SWITCH TO BATTERY WHEN VCC_PSAUX IS NOT AVAILABLE
+		# Register : CONTROL @ 0XFFA60040

+
+		# Enables the RTC. By writing a 0 to this bit, RTC will be powered off and the only module that potentially draws current from 
+		# he battery will be BBRAM. The value read through this bit does not necessarily reflect whether RTC is enabled or not. It is e
+		# pected that RTC is enabled every time it is being configured. If RTC is not used in the design, FSBL will disable it by writi
+		# g a 0 to this bit.
+		# PSU_RTC_CONTROL_BATTERY_DISABLE                                                 0X1
+
+		# This register controls various functionalities within the RTC
+		#(OFFSET, MASK, VALUE)      (0XFFA60040, 0x80000000U ,0x80000000U)  */
+    mask_write 0XFFA60040 0x80000000 0x80000000
+}
+
+set psu_post_config_data {
+		# : POST_CONFIG
+}
+
+set psu_peripherals_powerdwn_data {
+		# : POWER DOWN REQUEST INTERRUPT ENABLE
+		# : POWER DOWN TRIGGER
+}
+
+set psu_serdes_init_data {
+		# : SERDES INITIALIZATION
+		# : GT REFERENCE CLOCK SOURCE SELECTION
+		# Register : PLL_REF_SEL0 @ 0XFD410000

+
+		# PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		# 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		# Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		# PSU_SERDES_PLL_REF_SEL0_PLLREFSEL0                                              0xD
+
+		# PLL0 Reference Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD410000, 0x0000001FU ,0x0000000DU)  */
+    mask_write 0XFD410000 0x0000001F 0x0000000D
+		# Register : PLL_REF_SEL1 @ 0XFD410004

+
+		# PLL1 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		# 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		# Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		# PSU_SERDES_PLL_REF_SEL1_PLLREFSEL1                                              0x9
+
+		# PLL1 Reference Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD410004, 0x0000001FU ,0x00000009U)  */
+    mask_write 0XFD410004 0x0000001F 0x00000009
+		# Register : PLL_REF_SEL2 @ 0XFD410008

+
+		# PLL2 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		# 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		# Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		# PSU_SERDES_PLL_REF_SEL2_PLLREFSEL2                                              0x8
+
+		# PLL2 Reference Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD410008, 0x0000001FU ,0x00000008U)  */
+    mask_write 0XFD410008 0x0000001F 0x00000008
+		# Register : PLL_REF_SEL3 @ 0XFD41000C

+
+		# PLL3 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		# 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		# Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		# PSU_SERDES_PLL_REF_SEL3_PLLREFSEL3                                              0xF
+
+		# PLL3 Reference Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD41000C, 0x0000001FU ,0x0000000FU)  */
+    mask_write 0XFD41000C 0x0000001F 0x0000000F
+		# : GT REFERENCE CLOCK FREQUENCY SELECTION
+		# Register : L0_L0_REF_CLK_SEL @ 0XFD402860

+
+		# Sel of lane 0 ref clock local mux. Set to 1 to select lane 0 slicer output. Set to 0 to select lane0 ref clock mux output.
+		# PSU_SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL                                 0x1
+
+		# Lane0 Ref Clock Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD402860, 0x00000080U ,0x00000080U)  */
+    mask_write 0XFD402860 0x00000080 0x00000080
+		# Register : L0_L1_REF_CLK_SEL @ 0XFD402864

+
+		# Sel of lane 1 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane1 ref clock mux output.
+		# PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL                                 0x0
+
+		# Bit 3 of lane 1 ref clock mux one hot sel. Set to 1 to select lane 3 slicer output from ref clock network
+		# PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3                                   0x1
+
+		# Lane1 Ref Clock Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD402864, 0x00000088U ,0x00000008U)  */
+    mask_write 0XFD402864 0x00000088 0x00000008
+		# Register : L0_L2_REF_CLK_SEL @ 0XFD402868

+
+		# Sel of lane 2 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane2 ref clock mux output.
+		# PSU_SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL                                 0x1
+
+		# Lane2 Ref Clock Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD402868, 0x00000080U ,0x00000080U)  */
+    mask_write 0XFD402868 0x00000080 0x00000080
+		# Register : L0_L3_REF_CLK_SEL @ 0XFD40286C

+
+		# Sel of lane 3 ref clock local mux. Set to 1 to select lane 3 slicer output. Set to 0 to select lane3 ref clock mux output.
+		# PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL                                 0x0
+
+		# Bit 1 of lane 3 ref clock mux one hot sel. Set to 1 to select lane 1 slicer output from ref clock network
+		# PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1                                   0x1
+
+		# Lane3 Ref Clock Selection Register
+		#(OFFSET, MASK, VALUE)      (0XFD40286C, 0x00000082U ,0x00000002U)  */
+    mask_write 0XFD40286C 0x00000082 0x00000002
+		# : ENABLE SPREAD SPECTRUM
+		# Register : L2_TM_PLL_DIG_37 @ 0XFD40A094

+
+		# Enable/Disable coarse code satureation limiting logic
+		# PSU_SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION                         0x1
+
+		# Test mode register 37
+		#(OFFSET, MASK, VALUE)      (0XFD40A094, 0x00000010U ,0x00000010U)  */
+    mask_write 0XFD40A094 0x00000010 0x00000010
+		# Register : L2_PLL_SS_STEPS_0_LSB @ 0XFD40A368

+
+		# Spread Spectrum No of Steps [7:0]
+		# PSU_SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x38
+
+		# Spread Spectrum No of Steps bits 7:0
+		#(OFFSET, MASK, VALUE)      (0XFD40A368, 0x000000FFU ,0x00000038U)  */
+    mask_write 0XFD40A368 0x000000FF 0x00000038
+		# Register : L2_PLL_SS_STEPS_1_MSB @ 0XFD40A36C

+
+		# Spread Spectrum No of Steps [10:8]
+		# PSU_SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x03
+
+		# Spread Spectrum No of Steps bits 10:8
+		#(OFFSET, MASK, VALUE)      (0XFD40A36C, 0x00000007U ,0x00000003U)  */
+    mask_write 0XFD40A36C 0x00000007 0x00000003
+		# Register : L3_PLL_SS_STEPS_0_LSB @ 0XFD40E368

+
+		# Spread Spectrum No of Steps [7:0]
+		# PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x0
+
+		# Spread Spectrum No of Steps bits 7:0
+		#(OFFSET, MASK, VALUE)      (0XFD40E368, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD40E368 0x000000FF 0x00000000
+		# Register : L3_PLL_SS_STEPS_1_MSB @ 0XFD40E36C

+
+		# Spread Spectrum No of Steps [10:8]
+		# PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x0
+
+		# Spread Spectrum No of Steps bits 10:8
+		#(OFFSET, MASK, VALUE)      (0XFD40E36C, 0x00000007U ,0x00000000U)  */
+    mask_write 0XFD40E36C 0x00000007 0x00000000
+		# Register : L1_PLL_SS_STEPS_0_LSB @ 0XFD406368

+
+		# Spread Spectrum No of Steps [7:0]
+		# PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x0
+
+		# Spread Spectrum No of Steps bits 7:0
+		#(OFFSET, MASK, VALUE)      (0XFD406368, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD406368 0x000000FF 0x00000000
+		# Register : L1_PLL_SS_STEPS_1_MSB @ 0XFD40636C

+
+		# Spread Spectrum No of Steps [10:8]
+		# PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x0
+
+		# Spread Spectrum No of Steps bits 10:8
+		#(OFFSET, MASK, VALUE)      (0XFD40636C, 0x00000007U ,0x00000000U)  */
+    mask_write 0XFD40636C 0x00000007 0x00000000
+		# Register : L1_PLL_SS_STEP_SIZE_0_LSB @ 0XFD406370

+
+		# Step Size for Spread Spectrum [7:0]
+		# PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0x0
+
+		# Step Size for Spread Spectrum LSB
+		#(OFFSET, MASK, VALUE)      (0XFD406370, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD406370 0x000000FF 0x00000000
+		# Register : L1_PLL_SS_STEP_SIZE_1 @ 0XFD406374

+
+		# Step Size for Spread Spectrum [15:8]
+		# PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x0
+
+		# Step Size for Spread Spectrum 1
+		#(OFFSET, MASK, VALUE)      (0XFD406374, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD406374 0x000000FF 0x00000000
+		# Register : L1_PLL_SS_STEP_SIZE_2 @ 0XFD406378

+
+		# Step Size for Spread Spectrum [23:16]
+		# PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x0
+
+		# Step Size for Spread Spectrum 2
+		#(OFFSET, MASK, VALUE)      (0XFD406378, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD406378 0x000000FF 0x00000000
+		# Register : L1_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40637C

+
+		# Step Size for Spread Spectrum [25:24]
+		# PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		# Enable/Disable test mode force on SS step size
+		# PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		# Enable/Disable test mode force on SS no of steps
+		# PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		# Enable force on enable Spread Spectrum
+		#(OFFSET, MASK, VALUE)      (0XFD40637C, 0x00000033U ,0x00000030U)  */
+    mask_write 0XFD40637C 0x00000033 0x00000030
+		# Register : L2_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40A370

+
+		# Step Size for Spread Spectrum [7:0]
+		# PSU_SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0xF4
+
+		# Step Size for Spread Spectrum LSB
+		#(OFFSET, MASK, VALUE)      (0XFD40A370, 0x000000FFU ,0x000000F4U)  */
+    mask_write 0XFD40A370 0x000000FF 0x000000F4
+		# Register : L2_PLL_SS_STEP_SIZE_1 @ 0XFD40A374

+
+		# Step Size for Spread Spectrum [15:8]
+		# PSU_SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x31
+
+		# Step Size for Spread Spectrum 1
+		#(OFFSET, MASK, VALUE)      (0XFD40A374, 0x000000FFU ,0x00000031U)  */
+    mask_write 0XFD40A374 0x000000FF 0x00000031
+		# Register : L2_PLL_SS_STEP_SIZE_2 @ 0XFD40A378

+
+		# Step Size for Spread Spectrum [23:16]
+		# PSU_SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x2
+
+		# Step Size for Spread Spectrum 2
+		#(OFFSET, MASK, VALUE)      (0XFD40A378, 0x000000FFU ,0x00000002U)  */
+    mask_write 0XFD40A378 0x000000FF 0x00000002
+		# Register : L2_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40A37C

+
+		# Step Size for Spread Spectrum [25:24]
+		# PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		# Enable/Disable test mode force on SS step size
+		# PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		# Enable/Disable test mode force on SS no of steps
+		# PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		# Enable force on enable Spread Spectrum
+		#(OFFSET, MASK, VALUE)      (0XFD40A37C, 0x00000033U ,0x00000030U)  */
+    mask_write 0XFD40A37C 0x00000033 0x00000030
+		# Register : L3_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40E370

+
+		# Step Size for Spread Spectrum [7:0]
+		# PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0x0
+
+		# Step Size for Spread Spectrum LSB
+		#(OFFSET, MASK, VALUE)      (0XFD40E370, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD40E370 0x000000FF 0x00000000
+		# Register : L3_PLL_SS_STEP_SIZE_1 @ 0XFD40E374

+
+		# Step Size for Spread Spectrum [15:8]
+		# PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x0
+
+		# Step Size for Spread Spectrum 1
+		#(OFFSET, MASK, VALUE)      (0XFD40E374, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD40E374 0x000000FF 0x00000000
+		# Register : L3_PLL_SS_STEP_SIZE_2 @ 0XFD40E378

+
+		# Step Size for Spread Spectrum [23:16]
+		# PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x0
+
+		# Step Size for Spread Spectrum 2
+		#(OFFSET, MASK, VALUE)      (0XFD40E378, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD40E378 0x000000FF 0x00000000
+		# Register : L3_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40E37C

+
+		# Step Size for Spread Spectrum [25:24]
+		# PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		# Enable/Disable test mode force on SS step size
+		# PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		# Enable/Disable test mode force on SS no of steps
+		# PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		# Enable test mode forcing on enable Spread Spectrum
+		# PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS                             0x1
+
+		# Enable force on enable Spread Spectrum
+		#(OFFSET, MASK, VALUE)      (0XFD40E37C, 0x000000B3U ,0x000000B0U)  */
+    mask_write 0XFD40E37C 0x000000B3 0x000000B0
+		# Register : L2_TM_DIG_6 @ 0XFD40906C

+
+		# Bypass Descrambler
+		# PSU_SERDES_L2_TM_DIG_6_BYPASS_DESCRAM                                           0x1
+
+		# Enable Bypass for <1> TM_DIG_CTRL_6
+		# PSU_SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1
+
+		# Data path test modes in decoder and descram
+		#(OFFSET, MASK, VALUE)      (0XFD40906C, 0x00000003U ,0x00000003U)  */
+    mask_write 0XFD40906C 0x00000003 0x00000003
+		# Register : L2_TX_DIG_TM_61 @ 0XFD4080F4

+
+		# Bypass scrambler signal
+		# PSU_SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1
+
+		# Enable/disable scrambler bypass signal
+		# PSU_SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1
+
+		# MPHY PLL Gear and bypass scrambler
+		#(OFFSET, MASK, VALUE)      (0XFD4080F4, 0x00000003U ,0x00000003U)  */
+    mask_write 0XFD4080F4 0x00000003 0x00000003
+		# Register : L3_PLL_FBDIV_FRAC_3_MSB @ 0XFD40E360

+
+		# Enable test mode force on fractional mode enable
+		# PSU_SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC                             0x1
+
+		# Fractional feedback division control and fractional value for feedback division bits 26:24
+		#(OFFSET, MASK, VALUE)      (0XFD40E360, 0x00000040U ,0x00000040U)  */
+    mask_write 0XFD40E360 0x00000040 0x00000040
+		# Register : L3_TM_DIG_6 @ 0XFD40D06C

+
+		# Bypass 8b10b decoder
+		# PSU_SERDES_L3_TM_DIG_6_BYPASS_DECODER                                           0x1
+
+		# Enable Bypass for <3> TM_DIG_CTRL_6
+		# PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC                                         0x1
+
+		# Bypass Descrambler
+		# PSU_SERDES_L3_TM_DIG_6_BYPASS_DESCRAM                                           0x1
+
+		# Enable Bypass for <1> TM_DIG_CTRL_6
+		# PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1
+
+		# Data path test modes in decoder and descram
+		#(OFFSET, MASK, VALUE)      (0XFD40D06C, 0x0000000FU ,0x0000000FU)  */
+    mask_write 0XFD40D06C 0x0000000F 0x0000000F
+		# Register : L3_TX_DIG_TM_61 @ 0XFD40C0F4

+
+		# Enable/disable encoder bypass signal
+		# PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_ENC                                           0x1
+
+		# Bypass scrambler signal
+		# PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1
+
+		# Enable/disable scrambler bypass signal
+		# PSU_SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1
+
+		# MPHY PLL Gear and bypass scrambler
+		#(OFFSET, MASK, VALUE)      (0XFD40C0F4, 0x0000000BU ,0x0000000BU)  */
+    mask_write 0XFD40C0F4 0x0000000B 0x0000000B
+		# Register : L3_TXPMA_ST_0 @ 0XFD40CB00

+
+		# PHY Mode: 4'b000 - PCIe, 4'b001 - USB3, 4'b0010 - SATA, 4'b0100 - SGMII, 4'b0101 - DP, 4'b1000 - MPHY
+		# PSU_SERDES_L3_TXPMA_ST_0_TX_PHY_MODE                                            0x21
+
+		# Opmode Info
+		#(OFFSET, MASK, VALUE)      (0XFD40CB00, 0x000000F0U ,0x000000F0U)  */
+    mask_write 0XFD40CB00 0x000000F0 0x000000F0
+		# : GT LANE SETTINGS
+		# Register : ICM_CFG0 @ 0XFD410010

+
+		# Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse
+		# , 7 - Unused
+		# PSU_SERDES_ICM_CFG0_L0_ICM_CFG                                                  1
+
+		# Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused
+		#  7 - Unused
+		# PSU_SERDES_ICM_CFG0_L1_ICM_CFG                                                  4
+
+		# ICM Configuration Register 0
+		#(OFFSET, MASK, VALUE)      (0XFD410010, 0x00000077U ,0x00000041U)  */
+    mask_write 0XFD410010 0x00000077 0x00000041
+		# Register : ICM_CFG1 @ 0XFD410014

+
+		# Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused
+		#  7 - Unused
+		# PSU_SERDES_ICM_CFG1_L2_ICM_CFG                                                  3
+
+		# Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused
+		#  7 - Unused
+		# PSU_SERDES_ICM_CFG1_L3_ICM_CFG                                                  2
+
+		# ICM Configuration Register 1
+		#(OFFSET, MASK, VALUE)      (0XFD410014, 0x00000077U ,0x00000023U)  */
+    mask_write 0XFD410014 0x00000077 0x00000023
+		# : CHECKING PLL LOCK
+		# : ENABLE SERIAL DATA MUX DEEMPH
+		# Register : L1_TXPMD_TM_45 @ 0XFD404CB4

+
+		# Enable/disable DP post2 path
+		# PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH                         0x1
+
+		# Override enable/disable of DP post2 path
+		# PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH                    0x1
+
+		# Override enable/disable of DP post1 path
+		# PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH                    0x1
+
+		# Enable/disable DP main path
+		# PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH                          0x1
+
+		# Override enable/disable of DP main path
+		# PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH                     0x1
+
+		# Post or pre or main DP path selection
+		#(OFFSET, MASK, VALUE)      (0XFD404CB4, 0x00000037U ,0x00000037U)  */
+    mask_write 0XFD404CB4 0x00000037 0x00000037
+		# Register : L1_TX_ANA_TM_118 @ 0XFD4041D8

+
+		# Test register force for enabling/disablign TX deemphasis bits <17:0>
+		# PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0                                0x1
+
+		# Enable Override of TX deemphasis
+		#(OFFSET, MASK, VALUE)      (0XFD4041D8, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFD4041D8 0x00000001 0x00000001
+		# : ENABLE PRE EMPHAIS AND VOLTAGE SWING
+		# Register : L1_TXPMD_TM_48 @ 0XFD404CC0

+
+		# Margining factor value
+		# PSU_SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR                         0
+
+		# Margining factor
+		#(OFFSET, MASK, VALUE)      (0XFD404CC0, 0x0000001FU ,0x00000000U)  */
+    mask_write 0XFD404CC0 0x0000001F 0x00000000
+		# Register : L1_TX_ANA_TM_18 @ 0XFD404048

+
+		# pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved
+		# PSU_SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0                                   0
+
+		# Override for PIPE TX de-emphasis
+		#(OFFSET, MASK, VALUE)      (0XFD404048, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD404048 0x000000FF 0x00000000
+}
+
+set psu_resetout_init_data {
+		# : TAKING SERDES PERIPHERAL OUT OF RESET RESET
+		# : PUTTING USB0 IN RESET
+		# Register : RST_LPD_TOP @ 0XFF5E023C

+
+		# USB 0 reset for control registers
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X0
+
+		# Software control register for the LPD block.
+		#(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000400U ,0x00000000U)  */
+    mask_write 0XFF5E023C 0x00000400 0x00000000
+		# : USB0 PIPE POWER PRESENT
+		# Register : fpd_power_prsnt @ 0XFF9D0080

+
+		# This bit is used to choose between PIPE power present and 1'b1
+		# PSU_USB3_0_FPD_POWER_PRSNT_OPTION                                               0X1
+
+		# fpd_power_prsnt
+		#(OFFSET, MASK, VALUE)      (0XFF9D0080, 0x00000001U ,0x00000001U)  */
+    mask_write 0XFF9D0080 0x00000001 0x00000001
+		# : 
+		# Register : RST_LPD_TOP @ 0XFF5E023C

+
+		# USB 0 sleep circuit reset
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X0
+
+		# USB 0 reset
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X0
+
+		# Software control register for the LPD block.
+		#(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000140U ,0x00000000U)  */
+    mask_write 0XFF5E023C 0x00000140 0x00000000
+		# : PUTTING GEM0 IN RESET
+		# Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		# GEM 3 reset
+		# PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X0
+
+		# Software controlled reset for the GEMs
+		#(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  */
+    mask_write 0XFF5E0230 0x00000008 0x00000000
+		# : PUTTING SATA IN RESET
+		# Register : sata_misc_ctrl @ 0XFD3D0100

+
+		# Sata PM clock control select
+		# PSU_SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL                                         0x3
+
+		# Misc Contorls for SATA.This register may only be modified during bootup (while SATA block is disabled)
+		#(OFFSET, MASK, VALUE)      (0XFD3D0100, 0x00000003U ,0x00000003U)  */
+    mask_write 0XFD3D0100 0x00000003 0x00000003
+		# Register : RST_FPD_TOP @ 0XFD1A0100

+
+		# Sata block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X0
+
+		# FPD Block level software controlled reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000000U)  */
+    mask_write 0XFD1A0100 0x00000002 0x00000000
+		# : PUTTING PCIE IN RESET
+		# Register : RST_FPD_TOP @ 0XFD1A0100

+
+		# PCIE config reset
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X0
+
+		# PCIE control block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X0
+
+		# PCIE bridge block level reset (AXI interface)
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X0
+
+		# FPD Block level software controlled reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000E0000U ,0x00000000U)  */
+    mask_write 0XFD1A0100 0x000E0000 0x00000000
+		# : PUTTING DP IN RESET
+		# Register : RST_FPD_TOP @ 0XFD1A0100

+
+		# Display Port block level reset (includes DPDMA)
+		# PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X0
+
+		# FPD Block level software controlled reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00000000U)  */
+    mask_write 0XFD1A0100 0x00010000 0x00000000
+		# Register : DP_PHY_RESET @ 0XFD4A0200

+
+		# Set to '1' to hold the GT in reset. Clear to release.
+		# PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X0
+
+		# Reset the transmitter PHY.
+		#(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000000U)  */
+    mask_write 0XFD4A0200 0x00000002 0x00000000
+		# Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238

+
+		# Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		# ane0 Bits [3:2] - lane 1
+		# PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0X0
+
+		# Control PHY Power down
+		#(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x00000000U)  */
+    mask_write 0XFD4A0238 0x0000000F 0x00000000
+		# : USB0 GFLADJ
+		# Register : GUSB2PHYCFG @ 0XFE20C200

+
+		# USB 2.0 Turnaround Time (USBTrdTim) Sets the turnaround time in PHY clocks. Specifies the response time for a MAC request to 
+		# he Packet FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). The following are the required values for the minimum S
+		# C bus frequency of 60 MHz. USB turnaround time is a critical certification criteria when using long cables and five hub level
+		# . The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit
+		# UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger 
+		# alue. Note: This field is valid only in device mode.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM                                           0X9
+
+		# Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio
+		#  of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the
+		# time when the Transceiver Select is set to 2'b00 (HS) to the time the TxValid is driven to 0 for sending the chirp-K. This de
+		# ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power
+		# off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur
+		# ng hibernation. - This bit is valid only in device mode.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY                                             0X0
+
+		# Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen
+		# _n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre
+		#  to the external PHY. - 1'b1: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the external PHY. 
+		# ote: This bit must be set high for Port0 if PHY is used. Note: In Device mode - Before issuing any device endpoint command wh
+		# n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma
+		# d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet
+		# d.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM                                            0X0
+
+		# USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P
+		# Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 
+		# 'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte
+		#  in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i
+		#  active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL                                              0X0
+
+		# Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co
+		# figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app
+		# ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F
+		# r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s
+		# t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati
+		# g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi
+		#  when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20                                        0X1
+
+		# Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1
+		# full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with 
+		# ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U
+		# B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF                                              0X0
+
+		# ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa
+		# e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons
+		# ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s
+		# lected through DWC_USB3_HSPHY_INTERFACE.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL                                       0X1
+
+		# PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a
+		#  8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same 
+		# lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen
+		#  ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I
+		#  any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz.
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF                                               0X0
+
+		# HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by
+		# a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for 
+		# dditional delays introduced by the PHY. This may be required, since the delay introduced by the PHY in generating the linesta
+		# e condition may vary among PHYs. The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times.
+		# The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit times. The application must program this 
+		# ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH
+		#  clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One
+		# 60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times
+		# PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL                                             0X7
+
+		# Global USB2 PHY Configuration Register The application must program this register before starting any transactions on either 
+		# he SoC bus or the USB. In Device-only configurations, only one register is needed. In Host mode, per-port registers are imple
+		# ented.
+		#(OFFSET, MASK, VALUE)      (0XFE20C200, 0x00003FFFU ,0x00002457U)  */
+    mask_write 0XFE20C200 0x00003FFF 0x00002457
+		# Register : GFLADJ @ 0XFE20C630

+
+		# This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk. This register 
+		# alue is used to adjust the ITP interval when GCTL[SOFITPSYNC] is set to '1'; SOF and ITP interval when GLADJ.GFLADJ_REFCLK_LP
+		# _SEL is set to '1'. This field must be programmed to a non-zero value only if GFLADJ_REFCLK_LPM_SEL is set to '1' or GCTL.SOF
+		# TPSYNC is set to '1'. The value is derived as follows: FLADJ_REF_CLK_FLADJ=((125000/ref_clk_period_integer)-(125000/ref_clk_p
+		# riod)) * ref_clk_period where - the ref_clk_period_integer is the integer value of the ref_clk period got by truncating the d
+		# cimal (fractional) value that is programmed in the GUCTL.REF_CLK_PERIOD field. - the ref_clk_period is the ref_clk period inc
+		# uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ =
+		# ((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P
+		# RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value)
+		# PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ                                      0X0
+
+		# Global Frame Length Adjustment Register This register provides options for the software to control the core behavior with res
+		# ect to SOF (Start of Frame) and ITP (Isochronous Timestamp Packet) timers and frame timer functionality. It provides an optio
+		#  to override the fladj_30mhz_reg sideband signal. In addition, it enables running SOF or ITP frame timer counters completely 
+		# rom the ref_clk. This facilitates hardware LPM in host mode with the SOF or ITP counters being run from the ref_clk signal.
+		#(OFFSET, MASK, VALUE)      (0XFE20C630, 0x003FFF00U ,0x00000000U)  */
+    mask_write 0XFE20C630 0x003FFF00 0x00000000
+		# : CHECK PLL LOCK FOR LANE0
+		# Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

+
+		# Status Read value of PLL Lock
+		# PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+    mask_poll 0XFD4023E4 0x00000010
+		# : CHECK PLL LOCK FOR LANE1
+		# Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

+
+		# Status Read value of PLL Lock
+		# PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+    mask_poll 0XFD4063E4 0x00000010
+		# : CHECK PLL LOCK FOR LANE2
+		# Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

+
+		# Status Read value of PLL Lock
+		# PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+    mask_poll 0XFD40A3E4 0x00000010
+		# : CHECK PLL LOCK FOR LANE3
+		# Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

+
+		# Status Read value of PLL Lock
+		# PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+    mask_poll 0XFD40E3E4 0x00000010
+		# : UPDATING TWO PCIE REGISTERS DEFAULT VALUES, AS THESE REGISTERS HAVE INCORRECT RESET VALUES IN SILICON.
+		# Register : ATTR_37 @ 0XFD480094

+
+		# Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r
+		# gister.; EP=0x0001; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY                          0X1
+
+		# ATTR_37
+		#(OFFSET, MASK, VALUE)      (0XFD480094, 0x00004000U ,0x00004000U)  */
+    mask_write 0XFD480094 0x00004000 0x00004000
+		# Register : ATTR_25 @ 0XFD480064

+
+		# If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root
+		# ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED                      0X1
+
+		# ATTR_25
+		#(OFFSET, MASK, VALUE)      (0XFD480064, 0x00000200U ,0x00000200U)  */
+    mask_write 0XFD480064 0x00000200 0x00000200
+		# : PCIE SETTINGS
+		# Register : ATTR_7 @ 0XFD48001C

+
+		# Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		# ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		# Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		# erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		# set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		# re size in bytes.; EP=0x0004; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_7_ATTR_BAR0                                                0x0
+
+		# ATTR_7
+		#(OFFSET, MASK, VALUE)      (0XFD48001C, 0x0000FFFFU ,0x00000000U)  */
+    mask_write 0XFD48001C 0x0000FFFF 0x00000000
+		# Register : ATTR_8 @ 0XFD480020

+
+		# Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		# ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		# Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		# erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		# set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		# re size in bytes.; EP=0xFFF0; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_8_ATTR_BAR0                                                0x0
+
+		# ATTR_8
+		#(OFFSET, MASK, VALUE)      (0XFD480020, 0x0000FFFFU ,0x00000000U)  */
+    mask_write 0XFD480020 0x0000FFFF 0x00000000
+		# Register : ATTR_9 @ 0XFD480024

+
+		# Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		# AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		#  bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		# o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		# 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		# '7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		# ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_9_ATTR_BAR1                                                0x0
+
+		# ATTR_9
+		#(OFFSET, MASK, VALUE)      (0XFD480024, 0x0000FFFFU ,0x00000000U)  */
+    mask_write 0XFD480024 0x0000FFFF 0x00000000
+		# Register : ATTR_10 @ 0XFD480028

+
+		# Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		# AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		#  bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		# o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		# 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		# '7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		# ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_10_ATTR_BAR1                                               0x0
+
+		# ATTR_10
+		#(OFFSET, MASK, VALUE)      (0XFD480028, 0x0000FFFFU ,0x00000000U)  */
+    mask_write 0XFD480028 0x0000FFFF 0x00000000
+		# Register : ATTR_11 @ 0XFD48002C

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		# AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		# , bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		# ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		# most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		# . IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		# ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFFF
+		# PSU_PCIE_ATTRIB_ATTR_11_ATTR_BAR2                                               0xFFFF
+
+		# ATTR_11
+		#(OFFSET, MASK, VALUE)      (0XFD48002C, 0x0000FFFFU ,0x0000FFFFU)  */
+    mask_write 0XFD48002C 0x0000FFFF 0x0000FFFF
+		# Register : ATTR_12 @ 0XFD480030

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		# AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		# , bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		# ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		# most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		# . IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		# ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0x00FF
+		# PSU_PCIE_ATTRIB_ATTR_12_ATTR_BAR2                                               0xFF
+
+		# ATTR_12
+		#(OFFSET, MASK, VALUE)      (0XFD480030, 0x0000FFFFU ,0x000000FFU)  */
+    mask_write 0XFD480030 0x0000FFFF 0x000000FF
+		# Register : ATTR_13 @ 0XFD480034

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		# AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		#  Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		# t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		# t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		# if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		# f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		#  bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_13_ATTR_BAR3                                               0x0
+
+		# ATTR_13
+		#(OFFSET, MASK, VALUE)      (0XFD480034, 0x0000FFFFU ,0x00000000U)  */
+    mask_write 0XFD480034 0x0000FFFF 0x00000000
+		# Register : ATTR_14 @ 0XFD480038

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		# AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		#  Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		# t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		# t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		# if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		# f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		#  bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFFF
+		# PSU_PCIE_ATTRIB_ATTR_14_ATTR_BAR3                                               0xFFFF
+
+		# ATTR_14
+		#(OFFSET, MASK, VALUE)      (0XFD480038, 0x0000FFFFU ,0x0000FFFFU)  */
+    mask_write 0XFD480038 0x0000FFFF 0x0000FFFF
+		# Register : ATTR_15 @ 0XFD48003C

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		# AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		# , bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		# ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		# most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		# . IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		# ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFF0
+		# PSU_PCIE_ATTRIB_ATTR_15_ATTR_BAR4                                               0xFFF0
+
+		# ATTR_15
+		#(OFFSET, MASK, VALUE)      (0XFD48003C, 0x0000FFFFU ,0x0000FFF0U)  */
+    mask_write 0XFD48003C 0x0000FFFF 0x0000FFF0
+		# Register : ATTR_16 @ 0XFD480040

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		# AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		# , bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		# ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		# most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		# . IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		# ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0xFFF0
+		# PSU_PCIE_ATTRIB_ATTR_16_ATTR_BAR4                                               0xFFF0
+
+		# ATTR_16
+		#(OFFSET, MASK, VALUE)      (0XFD480040, 0x0000FFFFU ,0x0000FFF0U)  */
+    mask_write 0XFD480040 0x0000FFFF 0x0000FFF0
+		# Register : ATTR_17 @ 0XFD480044

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		# AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		# Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		# refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		# R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		# refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		# ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		# permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
+		# PSU_PCIE_ATTRIB_ATTR_17_ATTR_BAR5                                               0xFFF1
+
+		# ATTR_17
+		#(OFFSET, MASK, VALUE)      (0XFD480044, 0x0000FFFFU ,0x0000FFF1U)  */
+    mask_write 0XFD480044 0x0000FFFF 0x0000FFF1
+		# Register : ATTR_18 @ 0XFD480048

+
+		# For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		# AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		# tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		# Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		# refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		# R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		# refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		# ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		# permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
+		# PSU_PCIE_ATTRIB_ATTR_18_ATTR_BAR5                                               0xFFF1
+
+		# ATTR_18
+		#(OFFSET, MASK, VALUE)      (0XFD480048, 0x0000FFFFU ,0x0000FFF1U)  */
+    mask_write 0XFD480048 0x0000FFFF 0x0000FFF1
+		# Register : ATTR_27 @ 0XFD48006C

+
+		# Specifies maximum payload supported. Valid settings are: 0- 128 bytes, 1- 256 bytes, 2- 512 bytes, 3- 1024 bytes. Transferred
+		# to the Device Capabilities register. The values: 4-2048 bytes, 5- 4096 bytes are not supported; EP=0x0001; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED                      1
+
+		# Endpoint L1 Acceptable Latency. Records the latency that the endpoint can withstand on transitions from L1 state to L0 (if L1
+		# state supported). Valid settings are: 0h less than 1us, 1h 1 to 2us, 2h 2 to 4us, 3h 4 to 8us, 4h 8 to 16us, 5h 16 to 32us, 6
+		#  32 to 64us, 7h more than 64us. For Endpoints only. Must be 0h for other devices.; EP=0x0007; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY                        0x0
+
+		# ATTR_27
+		#(OFFSET, MASK, VALUE)      (0XFD48006C, 0x00000738U ,0x00000100U)  */
+    mask_write 0XFD48006C 0x00000738 0x00000100
+		# Register : ATTR_50 @ 0XFD4800C8

+
+		# Identifies the type of device/port as follows: 0000b PCI Express Endpoint device, 0001b Legacy PCI Express Endpoint device, 0
+		# 00b Root Port of PCI Express Root Complex, 0101b Upstream Port of PCI Express Switch, 0110b Downstream Port of PCI Express Sw
+		# tch, 0111b PCIE Express to PCI/PCI-X Bridge, 1000b PCI/PCI-X to PCI Express Bridge. Transferred to PCI Express Capabilities r
+		# gister. Must be consistent with IS_SWITCH and UPSTREAM_FACING settings.; EP=0x0000; RP=0x0004
+		# PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE                          4
+
+		# PCIe Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capab
+		# lity.; EP=0x009C; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR                                   0
+
+		# ATTR_50
+		#(OFFSET, MASK, VALUE)      (0XFD4800C8, 0x0000FFF0U ,0x00000040U)  */
+    mask_write 0XFD4800C8 0x0000FFF0 0x00000040
+		# Register : ATTR_105 @ 0XFD4801A4

+
+		# Number of credits that should be advertised for Completion data received on Virtual Channel 0. The bytes advertised must be l
+		# ss than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0172; RP=0x00CD
+		# PSU_PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD                              0xCD
+
+		# ATTR_105
+		#(OFFSET, MASK, VALUE)      (0XFD4801A4, 0x000007FFU ,0x000000CDU)  */
+    mask_write 0XFD4801A4 0x000007FF 0x000000CD
+		# Register : ATTR_106 @ 0XFD4801A8

+
+		# Number of credits that should be advertised for Completion headers received on Virtual Channel 0. The sum of the posted, non 
+		# osted, and completion header credits must be <= 80; EP=0x0048; RP=0x0024
+		# PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH                              0x24
+
+		# Number of credits that should be advertised for Non-Posted headers received on Virtual Channel 0. The number of non posted da
+		# a credits advertised by the block is equal to the number of non posted header credits. The sum of the posted, non posted, and
+		# completion header credits must be <= 80; EP=0x0004; RP=0x000C
+		# PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH                             0xC
+
+		# ATTR_106
+		#(OFFSET, MASK, VALUE)      (0XFD4801A8, 0x00003FFFU ,0x00000624U)  */
+    mask_write 0XFD4801A8 0x00003FFF 0x00000624
+		# Register : ATTR_107 @ 0XFD4801AC

+
+		# Number of credits that should be advertised for Non-Posted data received on Virtual Channel 0. The number of non posted data 
+		# redits advertised by the block is equal to two times the number of non posted header credits if atomic operations are support
+		# d or is equal to the number of non posted header credits if atomic operations are not supported. The bytes advertised must be
+		# less than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0008; RP=0x0018
+		# PSU_PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD                             0x18
+
+		# ATTR_107
+		#(OFFSET, MASK, VALUE)      (0XFD4801AC, 0x000007FFU ,0x00000018U)  */
+    mask_write 0XFD4801AC 0x000007FF 0x00000018
+		# Register : ATTR_108 @ 0XFD4801B0

+
+		# Number of credits that should be advertised for Posted data received on Virtual Channel 0. The bytes advertised must be less 
+		# han or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0020; RP=0x00B5
+		# PSU_PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD                              0xB5
+
+		# ATTR_108
+		#(OFFSET, MASK, VALUE)      (0XFD4801B0, 0x000007FFU ,0x000000B5U)  */
+    mask_write 0XFD4801B0 0x000007FF 0x000000B5
+		# Register : ATTR_109 @ 0XFD4801B4

+
+		# Not currently in use. Invert ECRC generated by block when trn_tecrc_gen_n and trn_terrfwd_n are asserted.; EP=0x0000; RP=0x00
+		# 0
+		# PSU_PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV                                      0x0
+
+		# Enables td bit clear and ECRC trim on received TLP's FALSE == don't trim TRUE == trim.; EP=0x0001; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM                                    0x1
+
+		# Enables ECRC check on received TLP's 0 == don't check 1 == always check 3 == check if enabled by ECRC check enable bit of AER
+		# cap structure; EP=0x0003; RP=0x0003
+		# PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK                                         0x3
+
+		# Index of last packet buffer used by TX TLM (i.e. number of buffers - 1). Calculated from max payload size supported and the n
+		# mber of brams configured for transmit; EP=0x001C; RP=0x001C
+		# PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET                                 0x1c
+
+		# Number of credits that should be advertised for Posted headers received on Virtual Channel 0. The sum of the posted, non post
+		# d, and completion header credits must be <= 80; EP=0x0004; RP=0x0020
+		# PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH                              0x20
+
+		# ATTR_109
+		#(OFFSET, MASK, VALUE)      (0XFD4801B4, 0x0000FFFFU ,0x00007E20U)  */
+    mask_write 0XFD4801B4 0x0000FFFF 0x00007E20
+		# Register : ATTR_34 @ 0XFD480088

+
+		# Specifies values to be transferred to Header Type register. Bit 7 should be set to '0' indicating single-function device. Bit
+		# 0 identifies header as Type 0 or Type 1, with '0' indicating a Type 0 header.; EP=0x0000; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE                                        0x1
+
+		# ATTR_34
+		#(OFFSET, MASK, VALUE)      (0XFD480088, 0x000000FFU ,0x00000001U)  */
+    mask_write 0XFD480088 0x000000FF 0x00000001
+		# Register : ATTR_53 @ 0XFD4800D4

+
+		# PM Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabil
+		# ty.; EP=0x0048; RP=0x0060
+		# PSU_PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR                                     0x60
+
+		# ATTR_53
+		#(OFFSET, MASK, VALUE)      (0XFD4800D4, 0x000000FFU ,0x00000060U)  */
+    mask_write 0XFD4800D4 0x000000FF 0x00000060
+		# Register : ATTR_41 @ 0XFD4800A4

+
+		# MSI Per-Vector Masking Capable. The value is transferred to the MSI Control Register[8]. When set, adds Mask and Pending Dwor
+		#  to Cap structure; EP=0x0000; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE                 0x0
+
+		# Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		# he management port.; EP=0x0001; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0
+
+		# MSI Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabi
+		# ity.; EP=0x0060; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR                                    0x0
+
+		# Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		# he management port.; EP=0x0001; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0
+
+		# ATTR_41
+		#(OFFSET, MASK, VALUE)      (0XFD4800A4, 0x000003FFU ,0x00000000U)  */
+    mask_write 0XFD4800A4 0x000003FF 0x00000000
+		# Register : ATTR_97 @ 0XFD480184

+
+		# Maximum Link Width. Valid settings are: 000001b x1, 000010b x2, 000100b x4, 001000b x8.; EP=0x0004; RP=0x0004
+		# PSU_PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH                            0x1
+
+		# Used by LTSSM to set Maximum Link Width. Valid settings are: 000001b [x1], 000010b [x2], 000100b [x4], 001000b [x8].; EP=0x00
+		# 4; RP=0x0004
+		# PSU_PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH                               0x1
+
+		# ATTR_97
+		#(OFFSET, MASK, VALUE)      (0XFD480184, 0x00000FFFU ,0x00000041U)  */
+    mask_write 0XFD480184 0x00000FFF 0x00000041
+		# Register : ATTR_100 @ 0XFD480190

+
+		# TRUE specifies upstream-facing port. FALSE specifies downstream-facing port.; EP=0x0001; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING                                   0x0
+
+		# ATTR_100
+		#(OFFSET, MASK, VALUE)      (0XFD480190, 0x00000040U ,0x00000000U)  */
+    mask_write 0XFD480190 0x00000040 0x00000000
+		# Register : ATTR_101 @ 0XFD480194

+
+		# Enable the routing of message TLPs to the user through the TRN RX interface. A bit value of 1 enables routing of the message 
+		# LP to the user. Messages are always decoded by the message decoder. Bit 0 - ERR COR, Bit 1 - ERR NONFATAL, Bit 2 - ERR FATAL,
+		# Bit 3 - INTA Bit 4 - INTB, Bit 5 - INTC, Bit 6 - INTD, Bit 7 PM_PME, Bit 8 - PME_TO_ACK, Bit 9 - unlock, Bit 10 PME_Turn_Off;
+		# EP=0x0000; RP=0x07FF
+		# PSU_PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE                                  0x7FF
+
+		# Disable BAR filtering. Does not change the behavior of the bar hit outputs; EP=0x0000; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING                             0x1
+
+		# ATTR_101
+		#(OFFSET, MASK, VALUE)      (0XFD480194, 0x0000FFE2U ,0x0000FFE2U)  */
+    mask_write 0XFD480194 0x0000FFE2 0x0000FFE2
+		# Register : ATTR_37 @ 0XFD480094

+
+		# Link Bandwidth notification capability. Indicates support for the link bandwidth notification status and interrupt mechanism.
+		# Required for Root.; EP=0x0000; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP           0x1
+
+		# ATTR_37
+		#(OFFSET, MASK, VALUE)      (0XFD480094, 0x00000200U ,0x00000200U)  */
+    mask_write 0XFD480094 0x00000200 0x00000200
+		# Register : ATTR_93 @ 0XFD480174

+
+		# Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L
+		# _REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN                               0x1
+
+		# Sets a user-defined timeout for the Replay Timer to force cause the retransmission of unacknowledged TLPs; refer to LL_REPLAY
+		# TIMEOUT_EN and LL_REPLAY_TIMEOUT_FUNC to see how this value is used. The unit for this attribute is in symbol times, which is
+		# 4ns at GEN1 speeds and 2ns at GEN2.; EP=0x0000; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT                                  0x1000
+
+		# ATTR_93
+		#(OFFSET, MASK, VALUE)      (0XFD480174, 0x0000FFFFU ,0x00009000U)  */
+    mask_write 0XFD480174 0x0000FFFF 0x00009000
+		# Register : ID @ 0XFD480200

+
+		# Device ID for the the PCIe Cap Structure Device ID field
+		# PSU_PCIE_ATTRIB_ID_CFG_DEV_ID                                                   0xd021
+
+		# Vendor ID for the PCIe Cap Structure Vendor ID field
+		# PSU_PCIE_ATTRIB_ID_CFG_VEND_ID                                                  0x10ee
+
+		# ID
+		#(OFFSET, MASK, VALUE)      (0XFD480200, 0xFFFFFFFFU ,0x10EED021U)  */
+    mask_write 0XFD480200 0xFFFFFFFF 0x10EED021
+		# Register : SUBSYS_ID @ 0XFD480204

+
+		# Subsystem ID for the the PCIe Cap Structure Subsystem ID field
+		# PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID                                         0x7
+
+		# Subsystem Vendor ID for the PCIe Cap Structure Subsystem Vendor ID field
+		# PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID                                    0x10ee
+
+		# SUBSYS_ID
+		#(OFFSET, MASK, VALUE)      (0XFD480204, 0xFFFFFFFFU ,0x10EE0007U)  */
+    mask_write 0XFD480204 0xFFFFFFFF 0x10EE0007
+		# Register : REV_ID @ 0XFD480208

+
+		# Revision ID for the the PCIe Cap Structure
+		# PSU_PCIE_ATTRIB_REV_ID_CFG_REV_ID                                               0x0
+
+		# REV_ID
+		#(OFFSET, MASK, VALUE)      (0XFD480208, 0x000000FFU ,0x00000000U)  */
+    mask_write 0XFD480208 0x000000FF 0x00000000
+		# Register : ATTR_24 @ 0XFD480060

+
+		# Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		# 8000; RP=0x8000
+		# PSU_PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE                                         0x400
+
+		# ATTR_24
+		#(OFFSET, MASK, VALUE)      (0XFD480060, 0x0000FFFFU ,0x00000400U)  */
+    mask_write 0XFD480060 0x0000FFFF 0x00000400
+		# Register : ATTR_25 @ 0XFD480064

+
+		# Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		# 0005; RP=0x0006
+		# PSU_PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE                                         0x6
+
+		# INTX Interrupt Generation Capable. If FALSE, this will cause Command[10] to be hardwired to 0.; EP=0x0001; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED                               0
+
+		# ATTR_25
+		#(OFFSET, MASK, VALUE)      (0XFD480064, 0x000001FFU ,0x00000006U)  */
+    mask_write 0XFD480064 0x000001FF 0x00000006
+		# Register : ATTR_4 @ 0XFD480010

+
+		# Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		# he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		# ges are sent if an error is detected).; EP=0x0001; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0
+
+		# Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		# he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		# ges are sent if an error is detected).; EP=0x0001; RP=0x0001
+		# PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0
+
+		# ATTR_4
+		#(OFFSET, MASK, VALUE)      (0XFD480010, 0x00001000U ,0x00000000U)  */
+    mask_write 0XFD480010 0x00001000 0x00000000
+		# Register : ATTR_89 @ 0XFD480164

+
+		# VSEC's Next Capability Offset pointer to the next item in the capabilities list, or 000h if this is the final capability.; EP
+		# 0x0140; RP=0x0140
+		# PSU_PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR                                   0
+
+		# ATTR_89
+		#(OFFSET, MASK, VALUE)      (0XFD480164, 0x00001FFEU ,0x00000000U)  */
+    mask_write 0XFD480164 0x00001FFE 0x00000000
+		# Register : ATTR_79 @ 0XFD48013C

+
+		# CRS SW Visibility. Indicates RC can return CRS to SW. Transferred to the Root Capabilities register.; EP=0x0000; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY                         1
+
+		# ATTR_79
+		#(OFFSET, MASK, VALUE)      (0XFD48013C, 0x00000020U ,0x00000020U)  */
+    mask_write 0XFD48013C 0x00000020 0x00000020
+		# Register : ATTR_43 @ 0XFD4800AC

+
+		# Indicates that the MSIX structures exists. If this is FALSE, then the MSIX structure cannot be accessed via either the link o
+		#  the management port.; EP=0x0001; RP=0x0000
+		# PSU_PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON                                        0
+
+		# ATTR_43
+		#(OFFSET, MASK, VALUE)      (0XFD4800AC, 0x00000100U ,0x00000000U)  */
+    mask_write 0XFD4800AC 0x00000100 0x00000000
+}
+
+set psu_resetin_init_data {
+		# : PUTTING SERDES PERIPHERAL IN RESET
+		# : PUTTING USB0 IN RESET
+		# Register : RST_LPD_TOP @ 0XFF5E023C

+
+		# USB 0 reset for control registers
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X1
+
+		# USB 0 sleep circuit reset
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X1
+
+		# USB 0 reset
+		# PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X1
+
+		# Software control register for the LPD block.
+		#(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000540U)  */
+    mask_write 0XFF5E023C 0x00000540 0x00000540
+		# : PUTTING GEM0 IN RESET
+		# Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		# GEM 3 reset
+		# PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X1
+
+		# Software controlled reset for the GEMs
+		#(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000008U)  */
+    mask_write 0XFF5E0230 0x00000008 0x00000008
+		# : PUTTING SATA IN RESET
+		# Register : RST_FPD_TOP @ 0XFD1A0100

+
+		# Sata block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X1
+
+		# FPD Block level software controlled reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000002U)  */
+    mask_write 0XFD1A0100 0x00000002 0x00000002
+		# : PUTTING PCIE IN RESET
+		# Register : RST_FPD_TOP @ 0XFD1A0100

+
+		# PCIE config reset
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X1
+
+		# PCIE control block level reset
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X1
+
+		# PCIE bridge block level reset (AXI interface)
+		# PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X1
+
+		# FPD Block level software controlled reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000E0000U ,0x000E0000U)  */
+    mask_write 0XFD1A0100 0x000E0000 0x000E0000
+		# : PUTTING DP IN RESET
+		# Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238

+
+		# Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		# ane0 Bits [3:2] - lane 1
+		# PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0XA
+
+		# Control PHY Power down
+		#(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x0000000AU)  */
+    mask_write 0XFD4A0238 0x0000000F 0x0000000A
+		# Register : DP_PHY_RESET @ 0XFD4A0200

+
+		# Set to '1' to hold the GT in reset. Clear to release.
+		# PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X1
+
+		# Reset the transmitter PHY.
+		#(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000002U)  */
+    mask_write 0XFD4A0200 0x00000002 0x00000002
+		# Register : RST_FPD_TOP @ 0XFD1A0100

+
+		# Display Port block level reset (includes DPDMA)
+		# PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X1
+
+		# FPD Block level software controlled reset
+		#(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00010000U)  */
+    mask_write 0XFD1A0100 0x00010000 0x00010000
+}
+
+set psu_ps_pl_isolation_removal_data {
+		# : PS-PL POWER UP REQUEST
+		# Register : REQ_PWRUP_INT_EN @ 0XFFD80118

+
+		# Power-up Request Interrupt Enable for PL
+		# PSU_PMU_GLOBAL_REQ_PWRUP_INT_EN_PL                                              1
+
+		# Power-up Request Interrupt Enable Register. Writing a 1 to this location will unmask the interrupt.
+		#(OFFSET, MASK, VALUE)      (0XFFD80118, 0x00800000U ,0x00800000U)  */
+    mask_write 0XFFD80118 0x00800000 0x00800000
+		# Register : REQ_PWRUP_TRIG @ 0XFFD80120

+
+		# Power-up Request Trigger for PL
+		# PSU_PMU_GLOBAL_REQ_PWRUP_TRIG_PL                                                1
+
+		# Power-up Request Trigger Register. A write of one to this location will generate a power-up request to the PMU.
+		#(OFFSET, MASK, VALUE)      (0XFFD80120, 0x00800000U ,0x00800000U)  */
+    mask_write 0XFFD80120 0x00800000 0x00800000
+		# : POLL ON PL POWER STATUS
+		# Register : REQ_PWRUP_STATUS @ 0XFFD80110

+
+		# Power-up Request Status for PL
+		# PSU_PMU_GLOBAL_REQ_PWRUP_STATUS_PL                                              1
+    mask_poll 0XFFD80110 0x00800000 0x00000000
+}
+
+set psu_ps_pl_reset_config_data {
+		# : PS PL RESET SEQUENCE
+		# : FABRIC RESET USING EMIO
+		# Register : MASK_DATA_5_MSW @ 0XFF0A002C

+
+		# Operation is the same as MASK_DATA_0_LSW[MASK_0_LSW]
+		# PSU_GPIO_MASK_DATA_5_MSW_MASK_5_MSW                                             0x8000
+
+		# Maskable Output Data (GPIO Bank5, EMIO, Upper 16bits)
+		#(OFFSET, MASK, VALUE)      (0XFF0A002C, 0xFFFF0000U ,0x80000000U)  */
+    mask_write 0XFF0A002C 0xFFFF0000 0x80000000
+		# Register : DIRM_5 @ 0XFF0A0344

+
+		# Operation is the same as DIRM_0[DIRECTION_0]
+		# PSU_GPIO_DIRM_5_DIRECTION_5                                                     0x80000000
+
+		# Direction mode (GPIO Bank5, EMIO)
+		#(OFFSET, MASK, VALUE)      (0XFF0A0344, 0xFFFFFFFFU ,0x80000000U)  */
+    mask_write 0XFF0A0344 0xFFFFFFFF 0x80000000
+		# Register : OEN_5 @ 0XFF0A0348

+
+		# Operation is the same as OEN_0[OP_ENABLE_0]
+		# PSU_GPIO_OEN_5_OP_ENABLE_5                                                      0x80000000
+
+		# Output enable (GPIO Bank5, EMIO)
+		#(OFFSET, MASK, VALUE)      (0XFF0A0348, 0xFFFFFFFFU ,0x80000000U)  */
+    mask_write 0XFF0A0348 0xFFFFFFFF 0x80000000
+		# Register : DATA_5 @ 0XFF0A0054

+
+		# Output Data
+		# PSU_GPIO_DATA_5_DATA_5                                                          0x80000000
+
+		# Output Data (GPIO Bank5, EMIO)
+		#(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  */
+    mask_write 0XFF0A0054 0xFFFFFFFF 0x80000000
+    mask_delay 0x00000000 1
+		# : FABRIC RESET USING DATA_5 TOGGLE
+		# Register : DATA_5 @ 0XFF0A0054

+
+		# Output Data
+		# PSU_GPIO_DATA_5_DATA_5                                                          0X00000000
+
+		# Output Data (GPIO Bank5, EMIO)
+		#(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x00000000U)  */
+    mask_write 0XFF0A0054 0xFFFFFFFF 0x00000000
+    mask_delay 0x00000000 1
+		# : FABRIC RESET USING DATA_5 TOGGLE
+		# Register : DATA_5 @ 0XFF0A0054

+
+		# Output Data
+		# PSU_GPIO_DATA_5_DATA_5                                                          0x80000000
+
+		# Output Data (GPIO Bank5, EMIO)
+		#(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  */
+    mask_write 0XFF0A0054 0xFFFFFFFF 0x80000000
+}
+
+proc psu_init {} {
+    # save current mode
+    set saved_mode [configparams force-mem-accesses]                  
+    # force accesses
+    configparams force-mem-accesses 1 
+    variable psu_mio_init_data 
+    variable psu_pll_init_data 
+    variable psu_clock_init_data
+	variable psu_ddr_init_data
+    variable psu_peripherals_init_data
+    variable psu_resetin_init_data
+    variable psu_resetout_init_data
+    variable psu_serdes_init_data
+    variable psu_resetin_init_data
+    variable psu_peripherals_powerdwn_data 
+
+    init_ps [subst {$psu_mio_init_data $psu_pll_init_data $psu_clock_init_data $psu_ddr_init_data }]
+    psu_ddr_phybringup_data 
+    init_ps [subst {$psu_peripherals_init_data $psu_resetin_init_data }]
+    init_serdes 
+    init_ps [subst {$psu_serdes_init_data $psu_resetout_init_data }]
+    init_peripheral 
+    init_ps [subst {$psu_peripherals_powerdwn_data }]
+    # restore original mode
+    configparams force-mem-accesses $saved_mode                                       
+}
+
+proc psu_post_config {} {
+    variable psu_post_config_data
+    init_ps [subst {$psu_post_config_data}]
+}
+
+proc psu_ps_pl_reset_config {} {
+    variable psu_ps_pl_reset_config_data
+    init_ps [subst {$psu_ps_pl_reset_config_data}]
+}
+
+proc psu_ps_pl_isolation_removal {} {
+    variable psu_ps_pl_isolation_removal_data
+    init_ps [subst {$psu_ps_pl_isolation_removal_data}]
+}
+
+
+proc mask_read { addr mask } {
+    set curval "0x[string range [mrd -force $addr] end-8 end]"
+    set maskedval [expr {$curval & $mask}]
+    return $maskedval
+}
+
+
+proc mask_poll { addr mask } {
+    set count 1
+    set curval "0x[string range [mrd -force $addr] end-8 end]"
+    set maskedval [expr {$curval & $mask}]
+    while { $maskedval == 0 } {
+        set curval "0x[string range [mrd -force $addr] end-8 end]"
+        set maskedval [expr {$curval & $mask}]
+        set count [ expr { $count + 1 } ]
+        if { $count == 100000000 } {
+          puts "Timeout Reached. Mask poll failed at ADDRESS: $addr MASK: $mask"
+          break
+        }
+    }
+}
+
+proc psu_mask_write { addr mask value } {
+    set curval "0x[string range [mrd -force $addr] end-8 end]"
+    set curval [expr {$curval & ~($mask)}]
+    set maskedval [expr {$value & $mask}]
+    set maskedval [expr {$curval | $maskedval}]
+    mwr -force $addr $maskedval
+}
+
+
+proc  serdes_fixcal_code {} {
+   #/*
+   # * L3_TM_CALIB_DIG19
+   # */
+   mask_write 0xFD40EC4C 0xFFFFFFFF 0x00000020
+   
+   
+   #/*
+   # * ICM_CFG0
+   # */
+   mask_write 0xFD410010 0xFFFFFFFF 0x00000001
+
+   
+   #/*
+   # * is calibration done, polling on L3_CALIB_DONE_STATUS
+   # */
+   mask_poll 0xFD40EF14 0x2
+ 
+   #unsigned int tmp_0_1; 
+   set tmp_0_1 [mrd -force -value 0xFD400B0C]
+   set tmp_0_1 [expr {$tmp_0_1 & 0x3F}]
+
+   set tmp_0_2 [expr {$tmp_0_1 & 0x7}]
+   set tmp_0_3 [expr {$tmp_0_1 & 0x38}]
+   
+   #Configure ICM for de-asserting CMN_Resetn
+   mask_write 0xFD410010 0xFFFFFFFF 0x00000000
+   mask_write 0xFD410014 0xFFFFFFFF 0x00000000
+
+   set tmp_0_2_mod [expr {($tmp_0_2 << 1) | (0x1)}]
+   set tmp_0_2_mod [expr {$tmp_0_2_mod << 4}]
+   
+   set tmp_0_3 [expr {$tmp_0_3 >> 3}]
+   mask_write 0xFD40EC4C 0xFFFFFFFF $tmp_0_3
+   
+   #L3_TM_CALIB_DIG18
+   mask_write 0xFD40EC48 0xFFFFFFFF $tmp_0_2_mod
+
+
+}
+
+proc serdes_enb_coarse_saturation {} { 
+   #/* 
+   # * Enable PLL Coarse Code saturation Logic
+   # */
+   mask_write 0xFD402094 0xFFFFFFFF 0x00000010 
+   mask_write 0xFD406094 0xFFFFFFFF 0x00000010 
+   mask_write 0xFD40A094 0xFFFFFFFF 0x00000010 
+   mask_write 0xFD40E094 0xFFFFFFFF 0x00000010
+
+}
+
+
+proc init_serdes {} {
+
+  serdes_fixcal_code
+  serdes_enb_coarse_saturation
+
+}
+
+proc poll { addr mask data} {
+    set curval "0x[string range [mrd -force $addr] end-8 end]"
+    set maskedval [expr {$curval & $mask}]
+    while { $maskedval != $data } {
+        set curval "0x[string range [mrd -force $addr] end-8 end]"
+        set maskedval [expr {$curval & $mask}]
+    }
+}
+
+proc init_peripheral {} {
+
+	# Release all resets in the IOU */
+   mask_write 0xFF5E0230 0xFFFFFFFF 0x00000000
+   mask_write 0xFF5E0234 0xFFFFFFFF 0x00000000
+   mask_write 0xFF5E0238 0xFFFFFFFF 0x00000000 
+
+	# Take LPD out of reset except R5 */
+   set tmp_0_1 [mrd -force -value 0xFF5E023C]
+   set tmp_0_1 [expr {$tmp_0_1 & 0x7}]
+   mask_write 0xFF5E023C 0xFFFFFFFF $tmp_0_1
+
+	# Take most of FPD out of reset */
+   mask_write 0XFD1A0100 0xFFFFFFFF 0x00000000 
+
+	# Making DPDMA as secure 
+   mask_write 0xFD690040 0x00000001 0x00000000 
+	# Making PCIe as secure 
+   mask_write 0xFD690030 0x00000001 0x00000000 
+
+}
+
+
+proc psu_ddr_phybringup_data {} {
+mwr -force  0xFD090000 0x0000A845
+mwr -force  0xFD090004 0x003FFFFF
+mwr -force  0xFD09000C 0x00000010
+mwr -force  0xFD090010 0x00000010
+
+poll 0xFD080030 0x0000000F 0x0000000F  
+	psu_mask_write 0xFD080004 0x00000001 0x00000001
+#poll for PHY initialization to complete 
+poll 0xFD080030 0x000000FF 0x0000001F 
+
+mwr -force  0xFD0701B0 0x00000001
+mwr -force  0xFD070320 0x00000001
+#//poll for DDR initialization to complete 
+poll 0xFD070004 0x0000000F 0x00000001 
+
+	psu_mask_write 0xFD080014 0x00000040 0x00000040
+#Dummy reads before PHY training starts
+mrd -force 0xFD070004    
+  #//dummy reads 
+mrd -force 0xFD070004    
+  #//dummy reads 
+mrd -force 0xFD070004    
+  #//dummy reads 
+mrd -force 0xFD070004    
+  #//dummy reads 
+mrd -force 0xFD070004    
+  #//dummy reads 
+mrd -force 0xFD070004    
+  #//dummy reads 
+psu_mask_write 0xFD080004 0xFFFFFFFF 0x0004FE01
+ #trigger PHY training 
+poll 0xFD080030 0x00000FFF 0x00000FFF
+ 
+  #Poll PUB_PGSR0 for Trng complete  
+
+
+ # Run Vref training in static read mode  
+mwr -force  0xFD080200 0x110011C7
+mwr -force  0xFD080018 0x00F01EF2
+mwr -force  0xFD08001C 0x55AA0098
+mwr -force  0xFD08142C 0x00001830
+mwr -force  0xFD08146C 0x00001830
+mwr -force  0xFD0814AC 0x00001830
+mwr -force  0xFD0814EC 0x00001830
+mwr -force  0xFD08152C 0x00001830
+psu_mask_write 0xFD080004 0xFFFFFFFF 0x00060001
+  
+ #trigger VreFPHY training 
+poll 0xFD080030 0x00004001 0x00004001
+     
+ #//Poll PUB_PGSR0 for Trng complete  
+ # Vref training is complete, disabling static read mode 
+mwr -force  0xFD080200 0x810011C7
+mwr -force  0xFD080018 0x00F12302
+mwr -force  0xFD08001C 0x55AA0080
+mwr -force  0xFD08142C 0x00001800
+mwr -force  0xFD08146C 0x00001800
+mwr -force  0xFD0814AC 0x00001800
+mwr -force  0xFD0814EC 0x00001800
+mwr -force  0xFD08152C 0x00001800
+mwr -force  0xFD070180 0x01000040
+mwr -force  0xFD070060 0x00000000
+	psu_mask_write 0xFD080014 0x00000040 0x00000000
+
+ 
+}
+
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.c
new file mode 100644
index 000000000..a6cdc38f1
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.c
@@ -0,0 +1,19357 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+* 
+*  This program is free software; you can redistribute it and/or modify
+*  it under the terms of the GNU General Public License as published by
+*  the Free Software Foundation; either version 2 of the License, or
+*  (at your option) any later version.
+*
+*  This program is distributed in the hope that it will be useful,
+*  but WITHOUT ANY WARRANTY; without even the implied warranty of
+*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+*  GNU General Public License for more details.
+* 
+*  You should have received a copy of the GNU General Public License along
+*  with this program; if not, see 
+* 
+* 
+******************************************************************************/ 
+
+#include 
+#include "psu_init_gpl.h"
+
+static void PSU_Mask_Write (unsigned long offset, unsigned long mask, unsigned long val)
+{
+	unsigned long RegVal = 0x0;
+	RegVal = Xil_In32 (offset);
+	RegVal &= ~(mask);
+	RegVal |= (val & mask);
+	Xil_Out32 (offset, RegVal);
+}
+
+unsigned long psu_pll_init_data() {
+		// : RPLL INIT
+		/*Register : RPLL_CFG @ 0XFF5E0034

+
+		PLL loop filter resistor control
+		PSU_CRL_APB_RPLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRL_APB_RPLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRL_APB_RPLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRL_APB_RPLL_CFG_LOCK_CNT                                                   0x258
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRL_APB_RPLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFF5E0034, 0xFE7FEDEFU ,0x7E4B0C62U)  
+		RegMask = (CRL_APB_RPLL_CFG_RES_MASK | CRL_APB_RPLL_CFG_CP_MASK | CRL_APB_RPLL_CFG_LFHF_MASK | CRL_APB_RPLL_CFG_LOCK_CNT_MASK | CRL_APB_RPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRL_APB_RPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRL_APB_RPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRL_APB_RPLL_CFG_LFHF_SHIFT
+			| 0x00000258U << CRL_APB_RPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRL_APB_RPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRL_APB_RPLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRL_APB_RPLL_CTRL_FBDIV                                                     0x48
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRL_APB_RPLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00717F00U ,0x00014800U)  
+		RegMask = (CRL_APB_RPLL_CTRL_PRE_SRC_MASK | CRL_APB_RPLL_CTRL_FBDIV_MASK | CRL_APB_RPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000048U << CRL_APB_RPLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRL_APB_RPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00717F00U ,0x00014800U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000008U)  
+		RegMask = (CRL_APB_RPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_RPLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000001U)  
+		RegMask = (CRL_APB_RPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_RPLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000000U)  
+		RegMask = (CRL_APB_RPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFF5E0040

+
+		RPLL is locked
+		PSU_CRL_APB_PLL_STATUS_RPLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFF5E0040, 0x00000002U ,0x00000002U)  */
+		mask_poll(CRL_APB_PLL_STATUS_OFFSET,0x00000002U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : RPLL_CTRL @ 0XFF5E0030

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_RPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : RPLL_TO_FPD_CTRL @ 0XFF5E0048

+
+		Divisor value for this clock.
+		PSU_CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFF5E0048, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_TO_FPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : RPLL FRAC CFG
+		/*Register : RPLL_FRAC_CFG @ 0XFF5E0038

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRL_APB_RPLL_FRAC_CFG_ENABLED                                               0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRL_APB_RPLL_FRAC_CFG_DATA                                                  0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFF5E0038, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRL_APB_RPLL_FRAC_CFG_ENABLED_MASK | CRL_APB_RPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRL_APB_RPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : IOPLL INIT
+		/*Register : IOPLL_CFG @ 0XFF5E0024

+
+		PLL loop filter resistor control
+		PSU_CRL_APB_IOPLL_CFG_RES                                                       0xc
+
+		PLL charge pump control
+		PSU_CRL_APB_IOPLL_CFG_CP                                                        0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRL_APB_IOPLL_CFG_LFHF                                                      0x3
+
+		Lock circuit counter setting
+		PSU_CRL_APB_IOPLL_CFG_LOCK_CNT                                                  0x339
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRL_APB_IOPLL_CFG_LOCK_DLY                                                  0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFF5E0024, 0xFE7FEDEFU ,0x7E672C6CU)  
+		RegMask = (CRL_APB_IOPLL_CFG_RES_MASK | CRL_APB_IOPLL_CFG_CP_MASK | CRL_APB_IOPLL_CFG_LFHF_MASK | CRL_APB_IOPLL_CFG_LOCK_CNT_MASK | CRL_APB_IOPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x0000000CU << CRL_APB_IOPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRL_APB_IOPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRL_APB_IOPLL_CFG_LFHF_SHIFT
+			| 0x00000339U << CRL_APB_IOPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRL_APB_IOPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E672C6CU);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRL_APB_IOPLL_CTRL_PRE_SRC                                                  0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRL_APB_IOPLL_CTRL_FBDIV                                                    0x2d
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRL_APB_IOPLL_CTRL_DIV2                                                     0x0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00717F00U ,0x00002D00U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_PRE_SRC_MASK | CRL_APB_IOPLL_CTRL_FBDIV_MASK | CRL_APB_IOPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_PRE_SRC_SHIFT
+			| 0x0000002DU << CRL_APB_IOPLL_CTRL_FBDIV_SHIFT
+			| 0x00000000U << CRL_APB_IOPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00717F00U ,0x00002D00U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000008U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_IOPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_IOPLL_CTRL_RESET                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000001U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_IOPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRL_APB_IOPLL_CTRL_RESET                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000000U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFF5E0040

+
+		IOPLL is locked
+		PSU_CRL_APB_PLL_STATUS_IOPLL_LOCK                                               1
+		(OFFSET, MASK, VALUE)      (0XFF5E0040, 0x00000001U ,0x00000001U)  */
+		mask_poll(CRL_APB_PLL_STATUS_OFFSET,0x00000001U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : IOPLL_CTRL @ 0XFF5E0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_IOPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : IOPLL_TO_FPD_CTRL @ 0XFF5E0044

+
+		Divisor value for this clock.
+		PSU_CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0                                          0x3
+
+		Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFF5E0044, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_TO_FPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : IOPLL FRAC CFG
+		/*Register : IOPLL_FRAC_CFG @ 0XFF5E0028

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRL_APB_IOPLL_FRAC_CFG_ENABLED                                              0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRL_APB_IOPLL_FRAC_CFG_DATA                                                 0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFF5E0028, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRL_APB_IOPLL_FRAC_CFG_ENABLED_MASK | CRL_APB_IOPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_IOPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRL_APB_IOPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : APU_PLL INIT
+		/*Register : APLL_CFG @ 0XFD1A0024

+
+		PLL loop filter resistor control
+		PSU_CRF_APB_APLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRF_APB_APLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRF_APB_APLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRF_APB_APLL_CFG_LOCK_CNT                                                   0x258
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRF_APB_APLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFD1A0024, 0xFE7FEDEFU ,0x7E4B0C62U)  
+		RegMask = (CRF_APB_APLL_CFG_RES_MASK | CRF_APB_APLL_CFG_CP_MASK | CRF_APB_APLL_CFG_LFHF_MASK | CRF_APB_APLL_CFG_LOCK_CNT_MASK | CRF_APB_APLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_APLL_CFG_RES_SHIFT
+			| 0x00000003U << CRF_APB_APLL_CFG_CP_SHIFT
+			| 0x00000003U << CRF_APB_APLL_CFG_LFHF_SHIFT
+			| 0x00000258U << CRF_APB_APLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRF_APB_APLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRF_APB_APLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRF_APB_APLL_CTRL_FBDIV                                                     0x42
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRF_APB_APLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00717F00U ,0x00014200U)  
+		RegMask = (CRF_APB_APLL_CTRL_PRE_SRC_MASK | CRF_APB_APLL_CTRL_FBDIV_MASK | CRF_APB_APLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000042U << CRF_APB_APLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRF_APB_APLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00717F00U ,0x00014200U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_APLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_APLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_APLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_APLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000001U)  
+		RegMask = (CRF_APB_APLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_APLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_APLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000000U)  
+		RegMask = (CRF_APB_APLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFD1A0044

+
+		APLL is locked
+		PSU_CRF_APB_PLL_STATUS_APLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000001U ,0x00000001U)  */
+		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000001U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : APLL_CTRL @ 0XFD1A0020

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_APLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_APLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : APLL_TO_LPD_CTRL @ 0XFD1A0048

+
+		Divisor value for this clock.
+		PSU_CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFD1A0048, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : APLL FRAC CFG
+		/*Register : APLL_FRAC_CFG @ 0XFD1A0028

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRF_APB_APLL_FRAC_CFG_ENABLED                                               0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRF_APB_APLL_FRAC_CFG_DATA                                                  0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFD1A0028, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRF_APB_APLL_FRAC_CFG_ENABLED_MASK | CRF_APB_APLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_APLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRF_APB_APLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_APLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : DDR_PLL INIT
+		/*Register : DPLL_CFG @ 0XFD1A0030

+
+		PLL loop filter resistor control
+		PSU_CRF_APB_DPLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRF_APB_DPLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRF_APB_DPLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRF_APB_DPLL_CFG_LOCK_CNT                                                   0x258
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRF_APB_DPLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFD1A0030, 0xFE7FEDEFU ,0x7E4B0C62U)  
+		RegMask = (CRF_APB_DPLL_CFG_RES_MASK | CRF_APB_DPLL_CFG_CP_MASK | CRF_APB_DPLL_CFG_LFHF_MASK | CRF_APB_DPLL_CFG_LOCK_CNT_MASK | CRF_APB_DPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRF_APB_DPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRF_APB_DPLL_CFG_LFHF_SHIFT
+			| 0x00000258U << CRF_APB_DPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRF_APB_DPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRF_APB_DPLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRF_APB_DPLL_CTRL_FBDIV                                                     0x40
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRF_APB_DPLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00717F00U ,0x00014000U)  
+		RegMask = (CRF_APB_DPLL_CTRL_PRE_SRC_MASK | CRF_APB_DPLL_CTRL_FBDIV_MASK | CRF_APB_DPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000040U << CRF_APB_DPLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRF_APB_DPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00717F00U ,0x00014000U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_DPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_DPLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000001U)  
+		RegMask = (CRF_APB_DPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_DPLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000000U)  
+		RegMask = (CRF_APB_DPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFD1A0044

+
+		DPLL is locked
+		PSU_CRF_APB_PLL_STATUS_DPLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000002U ,0x00000002U)  */
+		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000002U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : DPLL_CTRL @ 0XFD1A002C

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_DPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DPLL_TO_LPD_CTRL @ 0XFD1A004C

+
+		Divisor value for this clock.
+		PSU_CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFD1A004C, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : DPLL FRAC CFG
+		/*Register : DPLL_FRAC_CFG @ 0XFD1A0034

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRF_APB_DPLL_FRAC_CFG_ENABLED                                               0x0
+
+		Fractional value for the Feedback value.
+		PSU_CRF_APB_DPLL_FRAC_CFG_DATA                                                  0x0
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFD1A0034, 0x8000FFFFU ,0x00000000U)  
+		RegMask = (CRF_APB_DPLL_FRAC_CFG_ENABLED_MASK | CRF_APB_DPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_DPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x00000000U << CRF_APB_DPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : VIDEO_PLL INIT
+		/*Register : VPLL_CFG @ 0XFD1A003C

+
+		PLL loop filter resistor control
+		PSU_CRF_APB_VPLL_CFG_RES                                                        0x2
+
+		PLL charge pump control
+		PSU_CRF_APB_VPLL_CFG_CP                                                         0x3
+
+		PLL loop filter high frequency capacitor control
+		PSU_CRF_APB_VPLL_CFG_LFHF                                                       0x3
+
+		Lock circuit counter setting
+		PSU_CRF_APB_VPLL_CFG_LOCK_CNT                                                   0x28a
+
+		Lock circuit configuration settings for lock windowsize
+		PSU_CRF_APB_VPLL_CFG_LOCK_DLY                                                   0x3f
+
+		Helper data. Values are to be looked up in a table from Data Sheet
+		(OFFSET, MASK, VALUE)      (0XFD1A003C, 0xFE7FEDEFU ,0x7E514C62U)  
+		RegMask = (CRF_APB_VPLL_CFG_RES_MASK | CRF_APB_VPLL_CFG_CP_MASK | CRF_APB_VPLL_CFG_LFHF_MASK | CRF_APB_VPLL_CFG_LOCK_CNT_MASK | CRF_APB_VPLL_CFG_LOCK_DLY_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_VPLL_CFG_RES_SHIFT
+			| 0x00000003U << CRF_APB_VPLL_CFG_CP_SHIFT
+			| 0x00000003U << CRF_APB_VPLL_CFG_LFHF_SHIFT
+			| 0x0000028AU << CRF_APB_VPLL_CFG_LOCK_CNT_SHIFT
+			| 0x0000003FU << CRF_APB_VPLL_CFG_LOCK_DLY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E514C62U);
+	/*############################################################################################################################ */
+
+		// : UPDATE FB_DIV
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
+		PSU_CRF_APB_VPLL_CTRL_PRE_SRC                                                   0x0
+
+		The integer portion of the feedback divider to the PLL
+		PSU_CRF_APB_VPLL_CTRL_FBDIV                                                     0x39
+
+		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
+		PSU_CRF_APB_VPLL_CTRL_DIV2                                                      0x1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00717F00U ,0x00013900U)  
+		RegMask = (CRF_APB_VPLL_CTRL_PRE_SRC_MASK | CRF_APB_VPLL_CTRL_FBDIV_MASK | CRF_APB_VPLL_CTRL_DIV2_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_PRE_SRC_SHIFT
+			| 0x00000039U << CRF_APB_VPLL_CTRL_FBDIV_SHIFT
+			| 0x00000001U << CRF_APB_VPLL_CTRL_DIV2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00717F00U ,0x00013900U);
+	/*############################################################################################################################ */
+
+		// : BY PASS PLL
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_VPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_VPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : ASSERT RESET
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_VPLL_CTRL_RESET                                                     1
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000001U)  
+		RegMask = (CRF_APB_VPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_VPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : DEASSERT RESET
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
+		PSU_CRF_APB_VPLL_CTRL_RESET                                                     0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000000U)  
+		RegMask = (CRF_APB_VPLL_CTRL_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL STATUS
+		/*Register : PLL_STATUS @ 0XFD1A0044

+
+		VPLL is locked
+		PSU_CRF_APB_PLL_STATUS_VPLL_LOCK                                                1
+		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000004U ,0x00000004U)  */
+		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000004U);
+
+	/*############################################################################################################################ */
+
+		// : REMOVE PLL BY PASS
+		/*Register : VPLL_CTRL @ 0XFD1A0038

+
+		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    0
+
+		PLL Basic Control
+		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_VPLL_CTRL_BYPASS_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_BYPASS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : VPLL_TO_LPD_CTRL @ 0XFD1A0050

+
+		Divisor value for this clock.
+		PSU_CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0                                           0x3
+
+		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
+		(OFFSET, MASK, VALUE)      (0XFD1A0050, 0x00003F00U ,0x00000300U)  
+		RegMask = (CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000003U << CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		// : VIDEO FRAC CFG
+		/*Register : VPLL_FRAC_CFG @ 0XFD1A0040

+
+		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.
+		PSU_CRF_APB_VPLL_FRAC_CFG_ENABLED                                               0x1
+
+		Fractional value for the Feedback value.
+		PSU_CRF_APB_VPLL_FRAC_CFG_DATA                                                  0x820c
+
+		Fractional control for the PLL
+		(OFFSET, MASK, VALUE)      (0XFD1A0040, 0x8000FFFFU ,0x8000820CU)  
+		RegMask = (CRF_APB_VPLL_FRAC_CFG_ENABLED_MASK | CRF_APB_VPLL_FRAC_CFG_DATA_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_VPLL_FRAC_CFG_ENABLED_SHIFT
+			| 0x0000820CU << CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_VPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x8000820CU);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_clock_init_data() {
+		// : CLOCK CONTROL SLCR REGISTER
+		/*Register : GEM0_REF_CTRL @ 0XFF5E0050

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM0_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR0                                              0x8
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM0_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0050, 0x063F3F07U ,0x06010800U)  
+		RegMask = (CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000008U << CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM0_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM1_REF_CTRL @ 0XFF5E0054

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM1_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR0                                              0x8
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM1_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0054, 0x063F3F07U ,0x06010800U)  
+		RegMask = (CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000008U << CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM1_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM2_REF_CTRL @ 0XFF5E0058

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM2_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM2_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR0                                              0x8
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM2_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0058, 0x063F3F07U ,0x06010800U)  
+		RegMask = (CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000008U << CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM2_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM3_REF_CTRL @ 0XFF5E005C

+
+		Clock active for the RX channel
+		PSU_CRL_APB_GEM3_REF_CTRL_RX_CLKACT                                             0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM3_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR0                                              0xc
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM3_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E005C, 0x063F3F07U ,0x06010C00U)  
+		RegMask = (CRL_APB_GEM3_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM3_REF_CTRL_CLKACT_MASK | CRL_APB_GEM3_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM3_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM3_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_GEM3_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000CU << CRL_APB_GEM3_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM3_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010C00U);
+	/*############################################################################################################################ */
+
+		/*Register : GEM_TSU_REF_CTRL @ 0XFF5E0100

+
+		6 bit divider
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0                                           0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_SRCSEL                                             0x2
+
+		6 bit divider
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1                                           0x1
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_GEM_TSU_REF_CTRL_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0100, 0x013F3F07U ,0x01010602U)  
+		RegMask = (CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK | CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000006U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_GEM_TSU_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010602U);
+	/*############################################################################################################################ */
+
+		/*Register : USB0_BUS_REF_CTRL @ 0XFF5E0060

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_CLKACT                                            0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0                                          0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_USB0_BUS_REF_CTRL_SRCSEL                                            0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0060, 0x023F3F07U ,0x02010600U)  
+		RegMask = (CRL_APB_USB0_BUS_REF_CTRL_CLKACT_MASK | CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000006U << CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_USB0_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010600U);
+	/*############################################################################################################################ */
+
+		/*Register : USB1_BUS_REF_CTRL @ 0XFF5E0064

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_CLKACT                                            0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0                                          0x4
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_USB1_BUS_REF_CTRL_SRCSEL                                            0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0064, 0x023F3F07U ,0x02010400U)  
+		RegMask = (CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000004U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_USB1_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010400U);
+	/*############################################################################################################################ */
+
+		/*Register : USB3_DUAL_REF_CTRL @ 0XFF5E004C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_CLKACT                                           0x1
+
+		6 bit divider
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1                                         0xf
+
+		6 bit divider
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0                                         0x5
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL. (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL                                           0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E004C, 0x023F3F07U ,0x020F0500U)  
+		RegMask = (CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_MASK | CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT
+			| 0x0000000FU << CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000005U << CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_USB3_DUAL_REF_CTRL_OFFSET ,0x023F3F07U ,0x020F0500U);
+	/*############################################################################################################################ */
+
+		/*Register : QSPI_REF_CTRL @ 0XFF5E0068

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_QSPI_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR0                                              0xc
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_QSPI_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0068, 0x013F3F07U ,0x01010C00U)  
+		RegMask = (CRL_APB_QSPI_REF_CTRL_CLKACT_MASK | CRL_APB_QSPI_REF_CTRL_DIVISOR1_MASK | CRL_APB_QSPI_REF_CTRL_DIVISOR0_MASK | CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_QSPI_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_QSPI_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000CU << CRL_APB_QSPI_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_QSPI_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010C00U);
+	/*############################################################################################################################ */
+
+		/*Register : SDIO0_REF_CTRL @ 0XFF5E006C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SDIO0_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR0                                             0x7
+
+		000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SDIO0_REF_CTRL_SRCSEL                                               0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E006C, 0x013F3F07U ,0x01010702U)  
+		RegMask = (CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000007U << CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SDIO0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U);
+	/*############################################################################################################################ */
+
+		/*Register : SDIO1_REF_CTRL @ 0XFF5E0070

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SDIO1_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR0                                             0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SDIO1_REF_CTRL_SRCSEL                                               0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0070, 0x013F3F07U ,0x01010602U)  
+		RegMask = (CRL_APB_SDIO1_REF_CTRL_CLKACT_MASK | CRL_APB_SDIO1_REF_CTRL_DIVISOR1_MASK | CRL_APB_SDIO1_REF_CTRL_DIVISOR0_MASK | CRL_APB_SDIO1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SDIO1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000006U << CRL_APB_SDIO1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SDIO1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SDIO1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010602U);
+	/*############################################################################################################################ */
+
+		/*Register : SDIO_CLK_CTRL @ 0XFF18030C

+
+		MIO pad selection for sdio1_rx_clk (feedback clock from the PAD) 0: MIO [51] 1: MIO [76]
+		PSU_IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL                                     0
+
+		SoC Debug Clock Control
+		(OFFSET, MASK, VALUE)      (0XFF18030C, 0x00020000U ,0x00000000U)  
+		RegMask = (IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_SDIO_CLK_CTRL_OFFSET ,0x00020000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : UART0_REF_CTRL @ 0XFF5E0074

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_UART0_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART0_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART0_REF_CTRL_DIVISOR0                                             0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_UART0_REF_CTRL_SRCSEL                                               0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0074, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_UART0_REF_CTRL_CLKACT_MASK | CRL_APB_UART0_REF_CTRL_DIVISOR1_MASK | CRL_APB_UART0_REF_CTRL_DIVISOR0_MASK | CRL_APB_UART0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_UART0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_UART0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_UART0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_UART0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_UART0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : UART1_REF_CTRL @ 0XFF5E0078

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_UART1_REF_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART1_REF_CTRL_DIVISOR1                                             0x1
+
+		6 bit divider
+		PSU_CRL_APB_UART1_REF_CTRL_DIVISOR0                                             0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_UART1_REF_CTRL_SRCSEL                                               0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0078, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_UART1_REF_CTRL_CLKACT_MASK | CRL_APB_UART1_REF_CTRL_DIVISOR1_MASK | CRL_APB_UART1_REF_CTRL_DIVISOR0_MASK | CRL_APB_UART1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_UART1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_UART1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_UART1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_UART1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_UART1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : I2C0_REF_CTRL @ 0XFF5E0120

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_I2C0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR0                                              0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_I2C0_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0120, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_I2C0_REF_CTRL_CLKACT_MASK | CRL_APB_I2C0_REF_CTRL_DIVISOR1_MASK | CRL_APB_I2C0_REF_CTRL_DIVISOR0_MASK | CRL_APB_I2C0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_I2C0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_I2C0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_I2C0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_I2C0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_I2C0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : I2C1_REF_CTRL @ 0XFF5E0124

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_I2C1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR0                                              0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_I2C1_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0124, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_I2C1_REF_CTRL_CLKACT_MASK | CRL_APB_I2C1_REF_CTRL_DIVISOR1_MASK | CRL_APB_I2C1_REF_CTRL_DIVISOR0_MASK | CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_I2C1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_I2C1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_I2C1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_I2C1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : SPI0_REF_CTRL @ 0XFF5E007C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SPI0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR0                                              0x7
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SPI0_REF_CTRL_SRCSEL                                                0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E007C, 0x013F3F07U ,0x01010702U)  
+		RegMask = (CRL_APB_SPI0_REF_CTRL_CLKACT_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000007U << CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SPI0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U);
+	/*############################################################################################################################ */
+
+		/*Register : SPI1_REF_CTRL @ 0XFF5E0080

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_SPI1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR0                                              0x7
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_SPI1_REF_CTRL_SRCSEL                                                0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0080, 0x013F3F07U ,0x01010702U)  
+		RegMask = (CRL_APB_SPI1_REF_CTRL_CLKACT_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000007U << CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_SPI1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U);
+	/*############################################################################################################################ */
+
+		/*Register : CAN0_REF_CTRL @ 0XFF5E0084

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_CAN0_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR0                                              0xa
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CAN0_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0084, 0x013F3F07U ,0x01010A00U)  
+		RegMask = (CRL_APB_CAN0_REF_CTRL_CLKACT_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK | CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000AU << CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CAN0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U);
+	/*############################################################################################################################ */
+
+		/*Register : CAN1_REF_CTRL @ 0XFF5E0088

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_CAN1_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR0                                              0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CAN1_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0088, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_CAN1_REF_CTRL_CLKACT_MASK | CRL_APB_CAN1_REF_CTRL_DIVISOR1_MASK | CRL_APB_CAN1_REF_CTRL_DIVISOR0_MASK | CRL_APB_CAN1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_CAN1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_CAN1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_CAN1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CAN1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : CPU_R5_CTRL @ 0XFF5E0090

+
+		Turing this off will shut down the OCM, some parts of the APM, and prevent transactions going from the FPD to the LPD and cou
+		d lead to system hang
+		PSU_CRL_APB_CPU_R5_CTRL_CLKACT                                                  0x1
+
+		6 bit divider
+		PSU_CRL_APB_CPU_R5_CTRL_DIVISOR0                                                0x3
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CPU_R5_CTRL_SRCSEL                                                  0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0090, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_CPU_R5_CTRL_CLKACT_MASK | CRL_APB_CPU_R5_CTRL_DIVISOR0_MASK | CRL_APB_CPU_R5_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CPU_R5_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_CPU_R5_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_CPU_R5_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CPU_R5_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : IOU_SWITCH_CTRL @ 0XFF5E009C

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_IOU_SWITCH_CTRL_CLKACT                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_IOU_SWITCH_CTRL_DIVISOR0                                            0x6
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_IOU_SWITCH_CTRL_SRCSEL                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E009C, 0x01003F07U ,0x01000602U)  
+		RegMask = (CRL_APB_IOU_SWITCH_CTRL_CLKACT_MASK | CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_MASK | CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_IOU_SWITCH_CTRL_CLKACT_SHIFT
+			| 0x00000006U << CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_IOU_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
+	/*############################################################################################################################ */
+
+		/*Register : CSU_PLL_CTRL @ 0XFF5E00A0

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_CSU_PLL_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_CSU_PLL_CTRL_DIVISOR0                                               0x3
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_CSU_PLL_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00A0, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_CSU_PLL_CTRL_CLKACT_MASK | CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK | CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_CSU_PLL_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : PCAP_CTRL @ 0XFF5E00A4

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PCAP_CTRL_CLKACT                                                    0x1
+
+		6 bit divider
+		PSU_CRL_APB_PCAP_CTRL_DIVISOR0                                                  0x6
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PCAP_CTRL_SRCSEL                                                    0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00A4, 0x01003F07U ,0x01000602U)  
+		RegMask = (CRL_APB_PCAP_CTRL_CLKACT_MASK | CRL_APB_PCAP_CTRL_DIVISOR0_MASK | CRL_APB_PCAP_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PCAP_CTRL_CLKACT_SHIFT
+			| 0x00000006U << CRL_APB_PCAP_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_PCAP_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PCAP_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
+	/*############################################################################################################################ */
+
+		/*Register : LPD_SWITCH_CTRL @ 0XFF5E00A8

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_LPD_SWITCH_CTRL_CLKACT                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_LPD_SWITCH_CTRL_DIVISOR0                                            0x3
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_LPD_SWITCH_CTRL_SRCSEL                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00A8, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_LPD_SWITCH_CTRL_CLKACT_MASK | CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_MASK | CRL_APB_LPD_SWITCH_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_LPD_SWITCH_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_LPD_SWITCH_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_LPD_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : LPD_LSBUS_CTRL @ 0XFF5E00AC

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_LPD_LSBUS_CTRL_CLKACT                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_LPD_LSBUS_CTRL_DIVISOR0                                             0xf
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_LPD_LSBUS_CTRL_SRCSEL                                               0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00AC, 0x01003F07U ,0x01000F02U)  
+		RegMask = (CRL_APB_LPD_LSBUS_CTRL_CLKACT_MASK | CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_MASK | CRL_APB_LPD_LSBUS_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_LPD_LSBUS_CTRL_CLKACT_SHIFT
+			| 0x0000000FU << CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_LPD_LSBUS_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_LPD_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000F02U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_LPD_CTRL @ 0XFF5E00B0

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_DBG_LPD_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_DBG_LPD_CTRL_DIVISOR0                                               0x6
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_DBG_LPD_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00B0, 0x01003F07U ,0x01000602U)  
+		RegMask = (CRL_APB_DBG_LPD_CTRL_CLKACT_MASK | CRL_APB_DBG_LPD_CTRL_DIVISOR0_MASK | CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_DBG_LPD_CTRL_CLKACT_SHIFT
+			| 0x00000006U << CRL_APB_DBG_LPD_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_DBG_LPD_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
+	/*############################################################################################################################ */
+
+		/*Register : NAND_REF_CTRL @ 0XFF5E00B4

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_NAND_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_NAND_REF_CTRL_DIVISOR1                                              0x1
+
+		6 bit divider
+		PSU_CRL_APB_NAND_REF_CTRL_DIVISOR0                                              0xa
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_NAND_REF_CTRL_SRCSEL                                                0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00B4, 0x013F3F07U ,0x01010A00U)  
+		RegMask = (CRL_APB_NAND_REF_CTRL_CLKACT_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK | CRL_APB_NAND_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000AU << CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_NAND_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U);
+	/*############################################################################################################################ */
+
+		/*Register : ADMA_REF_CTRL @ 0XFF5E00B8

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_ADMA_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRL_APB_ADMA_REF_CTRL_DIVISOR0                                              0x3
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_ADMA_REF_CTRL_SRCSEL                                                0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00B8, 0x01003F07U ,0x01000302U)  
+		RegMask = (CRL_APB_ADMA_REF_CTRL_CLKACT_MASK | CRL_APB_ADMA_REF_CTRL_DIVISOR0_MASK | CRL_APB_ADMA_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT
+			| 0x00000003U << CRL_APB_ADMA_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_ADMA_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_ADMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
+	/*############################################################################################################################ */
+
+		/*Register : PL0_REF_CTRL @ 0XFF5E00C0

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL0_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL0_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL0_REF_CTRL_DIVISOR0                                               0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL0_REF_CTRL_SRCSEL                                                 0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00C0, 0x013F3F07U ,0x01010F00U)  
+		RegMask = (CRL_APB_PL0_REF_CTRL_CLKACT_MASK | CRL_APB_PL0_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL0_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL0_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL0_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_PL0_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_PL0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_PL0_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
+	/*############################################################################################################################ */
+
+		/*Register : PL1_REF_CTRL @ 0XFF5E00C4

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL1_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL1_REF_CTRL_DIVISOR1                                               0x4
+
+		6 bit divider
+		PSU_CRL_APB_PL1_REF_CTRL_DIVISOR0                                               0xf
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL1_REF_CTRL_SRCSEL                                                 0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00C4, 0x013F3F07U ,0x01040F00U)  
+		RegMask = (CRL_APB_PL1_REF_CTRL_CLKACT_MASK | CRL_APB_PL1_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL1_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL1_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL1_REF_CTRL_CLKACT_SHIFT
+			| 0x00000004U << CRL_APB_PL1_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000000FU << CRL_APB_PL1_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_PL1_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01040F00U);
+	/*############################################################################################################################ */
+
+		/*Register : PL2_REF_CTRL @ 0XFF5E00C8

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL2_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL2_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL2_REF_CTRL_DIVISOR0                                               0x4
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL2_REF_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00C8, 0x013F3F07U ,0x01010402U)  
+		RegMask = (CRL_APB_PL2_REF_CTRL_CLKACT_MASK | CRL_APB_PL2_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL2_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL2_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL2_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_PL2_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000004U << CRL_APB_PL2_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_PL2_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL2_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010402U);
+	/*############################################################################################################################ */
+
+		/*Register : PL3_REF_CTRL @ 0XFF5E00CC

+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_PL3_REF_CTRL_CLKACT                                                 0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL3_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_PL3_REF_CTRL_DIVISOR0                                               0x3
+
+		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_PL3_REF_CTRL_SRCSEL                                                 0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E00CC, 0x013F3F07U ,0x01010302U)  
+		RegMask = (CRL_APB_PL3_REF_CTRL_CLKACT_MASK | CRL_APB_PL3_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL3_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL3_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_PL3_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRL_APB_PL3_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000003U << CRL_APB_PL3_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_PL3_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_PL3_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010302U);
+	/*############################################################################################################################ */
+
+		/*Register : AMS_REF_CTRL @ 0XFF5E0108

+
+		6 bit divider
+		PSU_CRL_APB_AMS_REF_CTRL_DIVISOR1                                               0x1
+
+		6 bit divider
+		PSU_CRL_APB_AMS_REF_CTRL_DIVISOR0                                               0x1d
+
+		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_AMS_REF_CTRL_SRCSEL                                                 0x2
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_AMS_REF_CTRL_CLKACT                                                 0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0108, 0x013F3F07U ,0x01011D02U)  
+		RegMask = (CRL_APB_AMS_REF_CTRL_DIVISOR1_MASK | CRL_APB_AMS_REF_CTRL_DIVISOR0_MASK | CRL_APB_AMS_REF_CTRL_SRCSEL_MASK | CRL_APB_AMS_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_AMS_REF_CTRL_DIVISOR1_SHIFT
+			| 0x0000001DU << CRL_APB_AMS_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRL_APB_AMS_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRL_APB_AMS_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_AMS_REF_CTRL_OFFSET ,0x013F3F07U ,0x01011D02U);
+	/*############################################################################################################################ */
+
+		/*Register : DLL_REF_CTRL @ 0XFF5E0104

+
+		000 = IOPLL; 001 = RPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This
+		is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_DLL_REF_CTRL_SRCSEL                                                 0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0104, 0x00000007U ,0x00000000U)  
+		RegMask = (CRL_APB_DLL_REF_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_DLL_REF_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_DLL_REF_CTRL_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : TIMESTAMP_REF_CTRL @ 0XFF5E0128

+
+		6 bit divider
+		PSU_CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0                                         0xf
+
+		1XX = pss_ref_clk; 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 
+		 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL                                           0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT                                           0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFF5E0128, 0x01003F07U ,0x01000F00U)  
+		RegMask = (CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_MASK | CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_MASK | CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x0000000FU << CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_TIMESTAMP_REF_CTRL_OFFSET ,0x01003F07U ,0x01000F00U);
+	/*############################################################################################################################ */
+
+		/*Register : SATA_REF_CTRL @ 0XFD1A00A0

+
+		000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_SATA_REF_CTRL_SRCSEL                                                0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_SATA_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRF_APB_SATA_REF_CTRL_DIVISOR0                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00A0, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_SATA_REF_CTRL_SRCSEL_MASK | CRF_APB_SATA_REF_CTRL_CLKACT_MASK | CRF_APB_SATA_REF_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_SATA_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_SATA_REF_CTRL_CLKACT_SHIFT
+			| 0x00000002U << CRF_APB_SATA_REF_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_SATA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : PCIE_REF_CTRL @ 0XFD1A00B4

+
+		000 = IOPLL_TO_FPD; 010 = RPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cyc
+		es of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_PCIE_REF_CTRL_SRCSEL                                                0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_PCIE_REF_CTRL_CLKACT                                                0x1
+
+		6 bit divider
+		PSU_CRF_APB_PCIE_REF_CTRL_DIVISOR0                                              0x2
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00B4, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_PCIE_REF_CTRL_SRCSEL_MASK | CRF_APB_PCIE_REF_CTRL_CLKACT_MASK | CRF_APB_PCIE_REF_CTRL_DIVISOR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_PCIE_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_PCIE_REF_CTRL_CLKACT_SHIFT
+			| 0x00000002U << CRF_APB_PCIE_REF_CTRL_DIVISOR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_PCIE_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_VIDEO_REF_CTRL @ 0XFD1A0070

+
+		6 bit divider
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0                                          0x3
+
+		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL                                            0x3
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DP_VIDEO_REF_CTRL_CLKACT                                            0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0070, 0x013F3F07U ,0x01010303U)  
+		RegMask = (CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000003U << CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000003U << CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DP_VIDEO_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010303U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_AUDIO_REF_CTRL @ 0XFD1A0074

+
+		6 bit divider
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1                                          0x1
+
+		6 bit divider
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0                                          0x27
+
+		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL                                            0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DP_AUDIO_REF_CTRL_CLKACT                                            0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0074, 0x013F3F07U ,0x01012700U)  
+		RegMask = (CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000027U << CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DP_AUDIO_REF_CTRL_OFFSET ,0x013F3F07U ,0x01012700U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_STC_REF_CTRL @ 0XFD1A007C

+
+		6 bit divider
+		PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR1                                            0x1
+
+		6 bit divider
+		PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR0                                            0x11
+
+		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of t
+		e new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DP_STC_REF_CTRL_SRCSEL                                              0x3
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DP_STC_REF_CTRL_CLKACT                                              0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A007C, 0x013F3F07U ,0x01011103U)  
+		RegMask = (CRF_APB_DP_STC_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_STC_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_STC_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_STC_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_DP_STC_REF_CTRL_DIVISOR1_SHIFT
+			| 0x00000011U << CRF_APB_DP_STC_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000003U << CRF_APB_DP_STC_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DP_STC_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DP_STC_REF_CTRL_OFFSET ,0x013F3F07U ,0x01011103U);
+	/*############################################################################################################################ */
+
+		/*Register : ACPU_CTRL @ 0XFD1A0060

+
+		6 bit divider
+		PSU_CRF_APB_ACPU_CTRL_DIVISOR0                                                  0x1
+
+		000 = APLL; 010 = DPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_ACPU_CTRL_SRCSEL                                                    0x0
+
+		Clock active signal. Switch to 0 to disable the clock. For the half speed APU Clock
+		PSU_CRF_APB_ACPU_CTRL_CLKACT_HALF                                               0x1
+
+		Clock active signal. Switch to 0 to disable the clock. For the full speed ACPUX Clock. This will shut off the high speed cloc
+		 to the entire APU
+		PSU_CRF_APB_ACPU_CTRL_CLKACT_FULL                                               0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0060, 0x03003F07U ,0x03000100U)  
+		RegMask = (CRF_APB_ACPU_CTRL_DIVISOR0_MASK | CRF_APB_ACPU_CTRL_SRCSEL_MASK | CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK | CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_ACPU_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_ACPU_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_ACPU_CTRL_CLKACT_HALF_SHIFT
+			| 0x00000001U << CRF_APB_ACPU_CTRL_CLKACT_FULL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_ACPU_CTRL_OFFSET ,0x03003F07U ,0x03000100U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_TRACE_CTRL @ 0XFD1A0064

+
+		6 bit divider
+		PSU_CRF_APB_DBG_TRACE_CTRL_DIVISOR0                                             0x2
+
+		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DBG_TRACE_CTRL_SRCSEL                                               0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DBG_TRACE_CTRL_CLKACT                                               0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0064, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_DBG_TRACE_CTRL_DIVISOR0_MASK | CRF_APB_DBG_TRACE_CTRL_SRCSEL_MASK | CRF_APB_DBG_TRACE_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DBG_TRACE_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DBG_TRACE_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DBG_TRACE_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DBG_TRACE_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_FPD_CTRL @ 0XFD1A0068

+
+		6 bit divider
+		PSU_CRF_APB_DBG_FPD_CTRL_DIVISOR0                                               0x2
+
+		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DBG_FPD_CTRL_SRCSEL                                                 0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DBG_FPD_CTRL_CLKACT                                                 0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0068, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_DBG_FPD_CTRL_DIVISOR0_MASK | CRF_APB_DBG_FPD_CTRL_SRCSEL_MASK | CRF_APB_DBG_FPD_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DBG_FPD_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DBG_FPD_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DBG_FPD_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DBG_FPD_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DDR_CTRL @ 0XFD1A0080

+
+		6 bit divider
+		PSU_CRF_APB_DDR_CTRL_DIVISOR0                                                   0x2
+
+		000 = DPLL; 001 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This 
+		s not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DDR_CTRL_SRCSEL                                                     0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0080, 0x00003F07U ,0x00000200U)  
+		RegMask = (CRF_APB_DDR_CTRL_DIVISOR0_MASK | CRF_APB_DDR_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DDR_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DDR_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DDR_CTRL_OFFSET ,0x00003F07U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : GPU_REF_CTRL @ 0XFD1A0084

+
+		6 bit divider
+		PSU_CRF_APB_GPU_REF_CTRL_DIVISOR0                                               0x1
+
+		000 = IOPLL_TO_FPD; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_GPU_REF_CTRL_SRCSEL                                                 0x0
+
+		Clock active signal. Switch to 0 to disable the clock, which will stop clock for GPU (and both Pixel Processors).
+		PSU_CRF_APB_GPU_REF_CTRL_CLKACT                                                 0x1
+
+		Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
+		PSU_CRF_APB_GPU_REF_CTRL_PP0_CLKACT                                             0x1
+
+		Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
+		PSU_CRF_APB_GPU_REF_CTRL_PP1_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A0084, 0x07003F07U ,0x07000100U)  
+		RegMask = (CRF_APB_GPU_REF_CTRL_DIVISOR0_MASK | CRF_APB_GPU_REF_CTRL_SRCSEL_MASK | CRF_APB_GPU_REF_CTRL_CLKACT_MASK | CRF_APB_GPU_REF_CTRL_PP0_CLKACT_MASK | CRF_APB_GPU_REF_CTRL_PP1_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_GPU_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_GPU_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_GPU_REF_CTRL_CLKACT_SHIFT
+			| 0x00000001U << CRF_APB_GPU_REF_CTRL_PP0_CLKACT_SHIFT
+			| 0x00000001U << CRF_APB_GPU_REF_CTRL_PP1_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_GPU_REF_CTRL_OFFSET ,0x07003F07U ,0x07000100U);
+	/*############################################################################################################################ */
+
+		/*Register : GDMA_REF_CTRL @ 0XFD1A00B8

+
+		6 bit divider
+		PSU_CRF_APB_GDMA_REF_CTRL_DIVISOR0                                              0x2
+
+		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_GDMA_REF_CTRL_SRCSEL                                                0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_GDMA_REF_CTRL_CLKACT                                                0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00B8, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_GDMA_REF_CTRL_DIVISOR0_MASK | CRF_APB_GDMA_REF_CTRL_SRCSEL_MASK | CRF_APB_GDMA_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_GDMA_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_GDMA_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_GDMA_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_GDMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : DPDMA_REF_CTRL @ 0XFD1A00BC

+
+		6 bit divider
+		PSU_CRF_APB_DPDMA_REF_CTRL_DIVISOR0                                             0x2
+
+		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DPDMA_REF_CTRL_SRCSEL                                               0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_DPDMA_REF_CTRL_CLKACT                                               0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00BC, 0x01003F07U ,0x01000200U)  
+		RegMask = (CRF_APB_DPDMA_REF_CTRL_DIVISOR0_MASK | CRF_APB_DPDMA_REF_CTRL_SRCSEL_MASK | CRF_APB_DPDMA_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DPDMA_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DPDMA_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_DPDMA_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DPDMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
+	/*############################################################################################################################ */
+
+		/*Register : TOPSW_MAIN_CTRL @ 0XFD1A00C0

+
+		6 bit divider
+		PSU_CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0                                            0x2
+
+		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_TOPSW_MAIN_CTRL_SRCSEL                                              0x2
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_TOPSW_MAIN_CTRL_CLKACT                                              0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00C0, 0x01003F07U ,0x01000202U)  
+		RegMask = (CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_MASK | CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_MASK | CRF_APB_TOPSW_MAIN_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_TOPSW_MAIN_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_TOPSW_MAIN_CTRL_OFFSET ,0x01003F07U ,0x01000202U);
+	/*############################################################################################################################ */
+
+		/*Register : TOPSW_LSBUS_CTRL @ 0XFD1A00C4

+
+		6 bit divider
+		PSU_CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0                                           0x5
+
+		000 = APLL; 010 = IOPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL                                             0x2
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_TOPSW_LSBUS_CTRL_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00C4, 0x01003F07U ,0x01000502U)  
+		RegMask = (CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_MASK | CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_MASK | CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000005U << CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_SHIFT
+			| 0x00000002U << CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_TOPSW_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000502U);
+	/*############################################################################################################################ */
+
+		/*Register : GTGREF0_REF_CTRL @ 0XFD1A00C8

+
+		6 bit divider
+		PSU_CRF_APB_GTGREF0_REF_CTRL_DIVISOR0                                           0x4
+
+		000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_GTGREF0_REF_CTRL_SRCSEL                                             0x0
+
+		Clock active signal. Switch to 0 to disable the clock
+		PSU_CRF_APB_GTGREF0_REF_CTRL_CLKACT                                             0x1
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00C8, 0x01003F07U ,0x01000400U)  
+		RegMask = (CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK | CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK | CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK |  0 );
+
+		RegVal = ((0x00000004U << CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT
+			| 0x00000001U << CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_GTGREF0_REF_CTRL_OFFSET ,0x01003F07U ,0x01000400U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG_TSTMP_CTRL @ 0XFD1A00F8

+
+		6 bit divider
+		PSU_CRF_APB_DBG_TSTMP_CTRL_DIVISOR0                                             0x2
+
+		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)
+		PSU_CRF_APB_DBG_TSTMP_CTRL_SRCSEL                                               0x0
+
+		This register controls this reference clock
+		(OFFSET, MASK, VALUE)      (0XFD1A00F8, 0x00003F07U ,0x00000200U)  
+		RegMask = (CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_MASK | CRF_APB_DBG_TSTMP_CTRL_SRCSEL_MASK |  0 );
+
+		RegVal = ((0x00000002U << CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT
+			| 0x00000000U << CRF_APB_DBG_TSTMP_CTRL_SRCSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_DBG_TSTMP_CTRL_OFFSET ,0x00003F07U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : IOU_TTC_APB_CLK @ 0XFF180380

+
+		00" = Select the APB switch clock for the APB interface of TTC0'01" = Select the PLL ref clock for the APB interface of TTC0'
+		0" = Select the R5 clock for the APB interface of TTC0
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL                                           0
+
+		00" = Select the APB switch clock for the APB interface of TTC1'01" = Select the PLL ref clock for the APB interface of TTC1'
+		0" = Select the R5 clock for the APB interface of TTC1
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL                                           0
+
+		00" = Select the APB switch clock for the APB interface of TTC2'01" = Select the PLL ref clock for the APB interface of TTC2'
+		0" = Select the R5 clock for the APB interface of TTC2
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL                                           0
+
+		00" = Select the APB switch clock for the APB interface of TTC3'01" = Select the PLL ref clock for the APB interface of TTC3'
+		0" = Select the R5 clock for the APB interface of TTC3
+		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL                                           0
+
+		TTC APB clock select
+		(OFFSET, MASK, VALUE)      (0XFF180380, 0x000000FFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_IOU_TTC_APB_CLK_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : WDT_CLK_SEL @ 0XFD610100

+
+		System watchdog timer clock source selection: 0: Internal APB clock 1: External (PL clock via EMIO or Pinout clock via MIO)
+		PSU_FPD_SLCR_WDT_CLK_SEL_SELECT                                                 0
+
+		SWDT clock source select
+		(OFFSET, MASK, VALUE)      (0XFD610100, 0x00000001U ,0x00000000U)  
+		RegMask = (FPD_SLCR_WDT_CLK_SEL_SELECT_MASK |  0 );
+
+		RegVal = ((0x00000000U << FPD_SLCR_WDT_CLK_SEL_SELECT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (FPD_SLCR_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : WDT_CLK_SEL @ 0XFF180300

+
+		System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock from PL via EMIO, or from pinout 
+		ia MIO
+		PSU_IOU_SLCR_WDT_CLK_SEL_SELECT                                                 0
+
+		SWDT clock source select
+		(OFFSET, MASK, VALUE)      (0XFF180300, 0x00000001U ,0x00000000U)  
+		RegMask = (IOU_SLCR_WDT_CLK_SEL_SELECT_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_WDT_CLK_SEL_SELECT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : CSUPMU_WDT_CLK_SEL @ 0XFF410050

+
+		System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock pss_ref_clk
+		PSU_LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT                                          0
+
+		SWDT clock source select
+		(OFFSET, MASK, VALUE)      (0XFF410050, 0x00000001U ,0x00000000U)  
+		RegMask = (LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_MASK |  0 );
+
+		RegVal = ((0x00000000U << LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_ddr_init_data() {
+		// : DDR INITIALIZATION
+		// : DDR CONTROLLER RESET
+		/*Register : RST_DDR_SS @ 0XFD1A0108

+
+		DDR block level reset inside of the DDR Sub System
+		PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X1
+
+		DDR sub system block level reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000008U)  
+		RegMask = (CRF_APB_RST_DDR_SS_DDR_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_DDR_SS_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MSTR @ 0XFD070000

+
+		Indicates the configuration of the device used in the system. - 00 - x4 device - 01 - x8 device - 10 - x16 device - 11 - x32 
+		evice
+		PSU_DDRC_MSTR_DEVICE_CONFIG                                                     0x1
+
+		Choose which registers are used. - 0 - Original registers - 1 - Shadow registers
+		PSU_DDRC_MSTR_FREQUENCY_MODE                                                    0x0
+
+		Only present for multi-rank configurations. Each bit represents one rank. For two-rank configurations, only bits[25:24] are p
+		esent. - 1 - populated - 0 - unpopulated LSB is the lowest rank number. For 2 ranks following combinations are legal: - 01 - 
+		ne rank - 11 - Two ranks - Others - Reserved. For 4 ranks following combinations are legal: - 0001 - One rank - 0011 - Two ra
+		ks - 1111 - Four ranks
+		PSU_DDRC_MSTR_ACTIVE_RANKS                                                      0x1
+
+		SDRAM burst length used: - 0001 - Burst length of 2 (only supported for mDDR) - 0010 - Burst length of 4 - 0100 - Burst lengt
+		 of 8 - 1000 - Burst length of 16 (only supported for mDDR, LPDDR2, and LPDDR4) All other values are reserved. This controls 
+		he burst size used to access the SDRAM. This must match the burst length mode register setting in the SDRAM. (For BC4/8 on-th
+		-fly mode of DDR3 and DDR4, set this field to 0x0100) Burst length of 2 is not supported with AXI ports when MEMC_BURST_LENGT
+		 is 8. Burst length of 2 is only supported with MEMC_FREQ_RATIO = 1
+		PSU_DDRC_MSTR_BURST_RDWR                                                        0x4
+
+		Set to 1 when the uMCTL2 and DRAM has to be put in DLL-off mode for low frequency operation. Set to 0 to put uMCTL2 and DRAM 
+		n DLL-on mode for normal frequency operation. If DDR4 CRC/parity retry is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), d
+		l_off_mode is not supported, and this bit must be set to '0'.
+		PSU_DDRC_MSTR_DLL_OFF_MODE                                                      0x0
+
+		Selects proportion of DQ bus width that is used by the SDRAM - 00 - Full DQ bus width to SDRAM - 01 - Half DQ bus width to SD
+		AM - 10 - Quarter DQ bus width to SDRAM - 11 - Reserved. Note that half bus width mode is only supported when the SDRAM bus w
+		dth is a multiple of 16, and quarter bus width mode is only supported when the SDRAM bus width is a multiple of 32 and the co
+		figuration parameter MEMC_QBUS_SUPPORT is set. Bus width refers to DQ bus width (excluding any ECC width).
+		PSU_DDRC_MSTR_DATA_BUS_WIDTH                                                    0x0
+
+		1 indicates put the DRAM in geardown mode (2N) and 0 indicates put the DRAM in normal mode (1N). This register can be changed
+		 only when the Controller is in self-refresh mode. This signal must be set the same value as MR3 bit A3. Note: Geardown mode 
+		s not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set
+		PSU_DDRC_MSTR_GEARDOWN_MODE                                                     0x0
+
+		If 1, then uMCTL2 uses 2T timing. Otherwise, uses 1T timing. In 2T timing, all command signals (except chip select) are held 
+		or 2 clocks on the SDRAM bus. Chip select is asserted on the second cycle of the command Note: 2T timing is not supported in 
+		PDDR2/LPDDR3/LPDDR4 mode Note: 2T timing is not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set Note: 2T ti
+		ing is not supported in DDR4 geardown mode.
+		PSU_DDRC_MSTR_EN_2T_TIMING_MODE                                                 0x0
+
+		When set, enable burst-chop in DDR3/DDR4. Burst Chop for Reads is exercised only in HIF configurations (UMCTL2_INCL_ARB not s
+		t) and if in full bus width mode (MSTR.data_bus_width = 00). Burst Chop for Writes is exercised only if Partial Writes enable
+		 (UMCTL2_PARTIAL_WR=1) and if CRC is disabled (CRCPARCTL1.crc_enable = 0). If DDR4 CRC/parity retry is enabled (CRCPARCTL1.cr
+		_parity_retry_enable = 1), burst chop is not supported, and this bit must be set to '0'
+		PSU_DDRC_MSTR_BURSTCHOP                                                         0x0
+
+		Select LPDDR4 SDRAM - 1 - LPDDR4 SDRAM device in use. - 0 - non-LPDDR4 device in use Present only in designs configured to su
+		port LPDDR4.
+		PSU_DDRC_MSTR_LPDDR4                                                            0x0
+
+		Select DDR4 SDRAM - 1 - DDR4 SDRAM device in use. - 0 - non-DDR4 device in use Present only in designs configured to support 
+		DR4.
+		PSU_DDRC_MSTR_DDR4                                                              0x1
+
+		Select LPDDR3 SDRAM - 1 - LPDDR3 SDRAM device in use. - 0 - non-LPDDR3 device in use Present only in designs configured to su
+		port LPDDR3.
+		PSU_DDRC_MSTR_LPDDR3                                                            0x0
+
+		Select LPDDR2 SDRAM - 1 - LPDDR2 SDRAM device in use. - 0 - non-LPDDR2 device in use Present only in designs configured to su
+		port LPDDR2.
+		PSU_DDRC_MSTR_LPDDR2                                                            0x0
+
+		Select DDR3 SDRAM - 1 - DDR3 SDRAM device in use - 0 - non-DDR3 SDRAM device in use Only present in designs that support DDR3
+		
+		PSU_DDRC_MSTR_DDR3                                                              0x0
+
+		Master Register
+		(OFFSET, MASK, VALUE)      (0XFD070000, 0xE30FBE3DU ,0x41040010U)  
+		RegMask = (DDRC_MSTR_DEVICE_CONFIG_MASK | DDRC_MSTR_FREQUENCY_MODE_MASK | DDRC_MSTR_ACTIVE_RANKS_MASK | DDRC_MSTR_BURST_RDWR_MASK | DDRC_MSTR_DLL_OFF_MODE_MASK | DDRC_MSTR_DATA_BUS_WIDTH_MASK | DDRC_MSTR_GEARDOWN_MODE_MASK | DDRC_MSTR_EN_2T_TIMING_MODE_MASK | DDRC_MSTR_BURSTCHOP_MASK | DDRC_MSTR_LPDDR4_MASK | DDRC_MSTR_DDR4_MASK | DDRC_MSTR_LPDDR3_MASK | DDRC_MSTR_LPDDR2_MASK | DDRC_MSTR_DDR3_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_MSTR_DEVICE_CONFIG_SHIFT
+			| 0x00000000U << DDRC_MSTR_FREQUENCY_MODE_SHIFT
+			| 0x00000001U << DDRC_MSTR_ACTIVE_RANKS_SHIFT
+			| 0x00000004U << DDRC_MSTR_BURST_RDWR_SHIFT
+			| 0x00000000U << DDRC_MSTR_DLL_OFF_MODE_SHIFT
+			| 0x00000000U << DDRC_MSTR_DATA_BUS_WIDTH_SHIFT
+			| 0x00000000U << DDRC_MSTR_GEARDOWN_MODE_SHIFT
+			| 0x00000000U << DDRC_MSTR_EN_2T_TIMING_MODE_SHIFT
+			| 0x00000000U << DDRC_MSTR_BURSTCHOP_SHIFT
+			| 0x00000000U << DDRC_MSTR_LPDDR4_SHIFT
+			| 0x00000001U << DDRC_MSTR_DDR4_SHIFT
+			| 0x00000000U << DDRC_MSTR_LPDDR3_SHIFT
+			| 0x00000000U << DDRC_MSTR_LPDDR2_SHIFT
+			| 0x00000000U << DDRC_MSTR_DDR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_MSTR_OFFSET ,0xE30FBE3DU ,0x41040010U);
+	/*############################################################################################################################ */
+
+		/*Register : MRCTRL0 @ 0XFD070010

+
+		Setting this register bit to 1 triggers a mode register read or write operation. When the MR operation is complete, the uMCTL
+		 automatically clears this bit. The other register fields of this register must be written in a separate APB transaction, bef
+		re setting this mr_wr bit. It is recommended NOT to set this signal if in Init, Deep power-down or MPSM operating modes.
+		PSU_DDRC_MRCTRL0_MR_WR                                                          0x0
+
+		Address of the mode register that is to be written to. - 0000 - MR0 - 0001 - MR1 - 0010 - MR2 - 0011 - MR3 - 0100 - MR4 - 010
+		 - MR5 - 0110 - MR6 - 0111 - MR7 Don't Care for LPDDR2/LPDDR3/LPDDR4 (see MRCTRL1.mr_data for mode register addressing in LPD
+		R2/LPDDR3/LPDDR4) This signal is also used for writing to control words of RDIMMs. In that case, it corresponds to the bank a
+		dress bits sent to the RDIMM In case of DDR4, the bit[3:2] corresponds to the bank group bits. Therefore, the bit[3] as well 
+		s the bit[2:0] must be set to an appropriate value which is considered both the Address Mirroring of UDIMMs/RDIMMs and the Ou
+		put Inversion of RDIMMs.
+		PSU_DDRC_MRCTRL0_MR_ADDR                                                        0x0
+
+		Controls which rank is accessed by MRCTRL0.mr_wr. Normally, it is desired to access all ranks, so all bits should be set to 1
+		 However, for multi-rank UDIMMs/RDIMMs which implement address mirroring, it may be necessary to access ranks individually. E
+		amples (assume uMCTL2 is configured for 4 ranks): - 0x1 - select rank 0 only - 0x2 - select rank 1 only - 0x5 - select ranks 
+		 and 2 - 0xA - select ranks 1 and 3 - 0xF - select ranks 0, 1, 2 and 3
+		PSU_DDRC_MRCTRL0_MR_RANK                                                        0x3
+
+		Indicates whether Software intervention is allowed via MRCTRL0/MRCTRL1 before automatic SDRAM initialization routine or not. 
+		or DDR4, this bit can be used to initialize the DDR4 RCD (MR7) before automatic SDRAM initialization. For LPDDR4, this bit ca
+		 be used to program additional mode registers before automatic SDRAM initialization if necessary. Note: This must be cleared 
+		o 0 after completing Software operation. Otherwise, SDRAM initialization routine will not re-start. - 0 - Software interventi
+		n is not allowed - 1 - Software intervention is allowed
+		PSU_DDRC_MRCTRL0_SW_INIT_INT                                                    0x0
+
+		Indicates whether the mode register operation is MRS in PDA mode or not - 0 - MRS - 1 - MRS in Per DRAM Addressability mode
+		PSU_DDRC_MRCTRL0_PDA_EN                                                         0x0
+
+		Indicates whether the mode register operation is MRS or WR/RD for MPR (only supported for DDR4) - 0 - MRS - 1 - WR/RD for MPR
+		PSU_DDRC_MRCTRL0_MPR_EN                                                         0x0
+
+		Indicates whether the mode register operation is read or write. Only used for LPDDR2/LPDDR3/LPDDR4/DDR4. - 0 - Write - 1 - Re
+		d
+		PSU_DDRC_MRCTRL0_MR_TYPE                                                        0x0
+
+		Mode Register Read/Write Control Register 0. Note: Do not enable more than one of the following fields simultaneously: - sw_i
+		it_int - pda_en - mpr_en
+		(OFFSET, MASK, VALUE)      (0XFD070010, 0x8000F03FU ,0x00000030U)  
+		RegMask = (DDRC_MRCTRL0_MR_WR_MASK | DDRC_MRCTRL0_MR_ADDR_MASK | DDRC_MRCTRL0_MR_RANK_MASK | DDRC_MRCTRL0_SW_INIT_INT_MASK | DDRC_MRCTRL0_PDA_EN_MASK | DDRC_MRCTRL0_MPR_EN_MASK | DDRC_MRCTRL0_MR_TYPE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_MRCTRL0_MR_WR_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_MR_ADDR_SHIFT
+			| 0x00000003U << DDRC_MRCTRL0_MR_RANK_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_SW_INIT_INT_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_PDA_EN_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_MPR_EN_SHIFT
+			| 0x00000000U << DDRC_MRCTRL0_MR_TYPE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_MRCTRL0_OFFSET ,0x8000F03FU ,0x00000030U);
+	/*############################################################################################################################ */
+
+		/*Register : DERATEEN @ 0XFD070020

+
+		Derate value of tRC for LPDDR4 - 0 - Derating uses +1. - 1 - Derating uses +2. - 2 - Derating uses +3. - 3 - Derating uses +4
+		 Present only in designs configured to support LPDDR4. The required number of cycles for derating can be determined by dividi
+		g 3.75ns by the core_ddrc_core_clk period, and rounding up the next integer.
+		PSU_DDRC_DERATEEN_RC_DERATE_VALUE                                               0x3
+
+		Derate byte Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 Indicates which byte of the MRR data is used f
+		r derating. The maximum valid value depends on MEMC_DRAM_TOTAL_DATA_WIDTH.
+		PSU_DDRC_DERATEEN_DERATE_BYTE                                                   0x0
+
+		Derate value - 0 - Derating uses +1. - 1 - Derating uses +2. Present only in designs configured to support LPDDR2/LPDDR3/LPDD
+		4 Set to 0 for all LPDDR2 speed grades as derating value of +1.875 ns is less than a core_ddrc_core_clk period. Can be 0 or 1
+		for LPDDR3/LPDDR4, depending if +1.875 ns is less than a core_ddrc_core_clk period or not.
+		PSU_DDRC_DERATEEN_DERATE_VALUE                                                  0x0
+
+		Enables derating - 0 - Timing parameter derating is disabled - 1 - Timing parameter derating is enabled using MR4 read value.
+		Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 This field must be set to '0' for non-LPDDR2/LPDDR3/LPDDR4
+		mode.
+		PSU_DDRC_DERATEEN_DERATE_ENABLE                                                 0x0
+
+		Temperature Derate Enable Register
+		(OFFSET, MASK, VALUE)      (0XFD070020, 0x000003F3U ,0x00000300U)  
+		RegMask = (DDRC_DERATEEN_RC_DERATE_VALUE_MASK | DDRC_DERATEEN_DERATE_BYTE_MASK | DDRC_DERATEEN_DERATE_VALUE_MASK | DDRC_DERATEEN_DERATE_ENABLE_MASK |  0 );
+
+		RegVal = ((0x00000003U << DDRC_DERATEEN_RC_DERATE_VALUE_SHIFT
+			| 0x00000000U << DDRC_DERATEEN_DERATE_BYTE_SHIFT
+			| 0x00000000U << DDRC_DERATEEN_DERATE_VALUE_SHIFT
+			| 0x00000000U << DDRC_DERATEEN_DERATE_ENABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DERATEEN_OFFSET ,0x000003F3U ,0x00000300U);
+	/*############################################################################################################################ */
+
+		/*Register : DERATEINT @ 0XFD070024

+
+		Interval between two MR4 reads, used to derate the timing parameters. Present only in designs configured to support LPDDR2/LP
+		DR3/LPDDR4. This register must not be set to zero
+		PSU_DDRC_DERATEINT_MR4_READ_INTERVAL                                            0x800000
+
+		Temperature Derate Interval Register
+		(OFFSET, MASK, VALUE)      (0XFD070024, 0xFFFFFFFFU ,0x00800000U)  
+		RegMask = (DDRC_DERATEINT_MR4_READ_INTERVAL_MASK |  0 );
+
+		RegVal = ((0x00800000U << DDRC_DERATEINT_MR4_READ_INTERVAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DERATEINT_OFFSET ,0xFFFFFFFFU ,0x00800000U);
+	/*############################################################################################################################ */
+
+		/*Register : PWRCTL @ 0XFD070030

+
+		Self refresh state is an intermediate state to enter to Self refresh power down state or exit Self refresh power down state f
+		r LPDDR4. This register controls transition from the Self refresh state. - 1 - Prohibit transition from Self refresh state - 
+		 - Allow transition from Self refresh state
+		PSU_DDRC_PWRCTL_STAY_IN_SELFREF                                                 0x0
+
+		A value of 1 to this register causes system to move to Self Refresh state immediately, as long as it is not in INIT or DPD/MP
+		M operating_mode. This is referred to as Software Entry/Exit to Self Refresh. - 1 - Software Entry to Self Refresh - 0 - Soft
+		are Exit from Self Refresh
+		PSU_DDRC_PWRCTL_SELFREF_SW                                                      0x0
+
+		When this is 1, the uMCTL2 puts the SDRAM into maximum power saving mode when the transaction store is empty. This register m
+		st be reset to '0' to bring uMCTL2 out of maximum power saving mode. Present only in designs configured to support DDR4. For 
+		on-DDR4, this register should not be set to 1. Note that MPSM is not supported when using a DWC DDR PHY, if the PHY parameter
+		DWC_AC_CS_USE is disabled, as the MPSM exit sequence requires the chip-select signal to toggle. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRCTL_MPSM_EN                                                         0x0
+
+		Enable the assertion of dfi_dram_clk_disable whenever a clock is not required by the SDRAM. If set to 0, dfi_dram_clk_disable
+		is never asserted. Assertion of dfi_dram_clk_disable is as follows: In DDR2/DDR3, can only be asserted in Self Refresh. In DD
+		4, can be asserted in following: - in Self Refresh. - in Maximum Power Saving Mode In mDDR/LPDDR2/LPDDR3, can be asserted in 
+		ollowing: - in Self Refresh - in Power Down - in Deep Power Down - during Normal operation (Clock Stop) In LPDDR4, can be ass
+		rted in following: - in Self Refresh Power Down - in Power Down - during Normal operation (Clock Stop)
+		PSU_DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE                                         0x0
+
+		When this is 1, uMCTL2 puts the SDRAM into deep power-down mode when the transaction store is empty. This register must be re
+		et to '0' to bring uMCTL2 out of deep power-down mode. Controller performs automatic SDRAM initialization on deep power-down 
+		xit. Present only in designs configured to support mDDR or LPDDR2 or LPDDR3. For non-mDDR/non-LPDDR2/non-LPDDR3, this registe
+		 should not be set to 1. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRCTL_DEEPPOWERDOWN_EN                                                0x0
+
+		If true then the uMCTL2 goes into power-down after a programmable number of cycles 'maximum idle clocks before power down' (P
+		RTMG.powerdown_to_x32). This register bit may be re-programmed during the course of normal operation.
+		PSU_DDRC_PWRCTL_POWERDOWN_EN                                                    0x0
+
+		If true then the uMCTL2 puts the SDRAM into Self Refresh after a programmable number of cycles 'maximum idle clocks before Se
+		f Refresh (PWRTMG.selfref_to_x32)'. This register bit may be re-programmed during the course of normal operation.
+		PSU_DDRC_PWRCTL_SELFREF_EN                                                      0x0
+
+		Low Power Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070030, 0x0000007FU ,0x00000000U)  
+		RegMask = (DDRC_PWRCTL_STAY_IN_SELFREF_MASK | DDRC_PWRCTL_SELFREF_SW_MASK | DDRC_PWRCTL_MPSM_EN_MASK | DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_MASK | DDRC_PWRCTL_DEEPPOWERDOWN_EN_MASK | DDRC_PWRCTL_POWERDOWN_EN_MASK | DDRC_PWRCTL_SELFREF_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PWRCTL_STAY_IN_SELFREF_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_SELFREF_SW_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_MPSM_EN_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_DEEPPOWERDOWN_EN_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_POWERDOWN_EN_SHIFT
+			| 0x00000000U << DDRC_PWRCTL_SELFREF_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PWRCTL_OFFSET ,0x0000007FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PWRTMG @ 0XFD070034

+
+		After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into Self Refresh. This must be enabled in 
+		he PWRCTL.selfref_en. Unit: Multiples of 32 clocks. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRTMG_SELFREF_TO_X32                                                  0x40
+
+		Minimum deep power-down time. For mDDR, value from the JEDEC specification is 0 as mDDR exits from deep power-down mode immed
+		ately after PWRCTL.deeppowerdown_en is de-asserted. For LPDDR2/LPDDR3, value from the JEDEC specification is 500us. Unit: Mul
+		iples of 4096 clocks. Present only in designs configured to support mDDR, LPDDR2 or LPDDR3. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRTMG_T_DPD_X4096                                                     0x84
+
+		After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into power-down. This must be enabled in th
+		 PWRCTL.powerdown_en. Unit: Multiples of 32 clocks FOR PERFORMANCE ONLY.
+		PSU_DDRC_PWRTMG_POWERDOWN_TO_X32                                                0x10
+
+		Low Power Timing Register
+		(OFFSET, MASK, VALUE)      (0XFD070034, 0x00FFFF1FU ,0x00408410U)  
+		RegMask = (DDRC_PWRTMG_SELFREF_TO_X32_MASK | DDRC_PWRTMG_T_DPD_X4096_MASK | DDRC_PWRTMG_POWERDOWN_TO_X32_MASK |  0 );
+
+		RegVal = ((0x00000040U << DDRC_PWRTMG_SELFREF_TO_X32_SHIFT
+			| 0x00000084U << DDRC_PWRTMG_T_DPD_X4096_SHIFT
+			| 0x00000010U << DDRC_PWRTMG_POWERDOWN_TO_X32_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PWRTMG_OFFSET ,0x00FFFF1FU ,0x00408410U);
+	/*############################################################################################################################ */
+
+		/*Register : RFSHCTL0 @ 0XFD070050

+
+		Threshold value in number of clock cycles before the critical refresh or page timer expires. A critical refresh is to be issu
+		d before this threshold is reached. It is recommended that this not be changed from the default value, currently shown as 0x2
+		 It must always be less than internally used t_rfc_nom_x32. Note that, in LPDDR2/LPDDR3/LPDDR4, internally used t_rfc_nom_x32
+		may be equal to RFSHTMG.t_rfc_nom_x32>>2 if derating is enabled (DERATEEN.derate_enable=1). Otherwise, internally used t_rfc_
+		om_x32 will be equal to RFSHTMG.t_rfc_nom_x32. Unit: Multiples of 32 clocks.
+		PSU_DDRC_RFSHCTL0_REFRESH_MARGIN                                                0x2
+
+		If the refresh timer (tRFCnom, also known as tREFI) has expired at least once, but it has not expired (RFSHCTL0.refresh_burst
+		1) times yet, then a speculative refresh may be performed. A speculative refresh is a refresh performed at a time when refres
+		 would be useful, but before it is absolutely required. When the SDRAM bus is idle for a period of time determined by this RF
+		HCTL0.refresh_to_x32 and the refresh timer has expired at least once since the last refresh, then a speculative refresh is pe
+		formed. Speculative refreshes continues successively until there are no refreshes pending or until new reads or writes are is
+		ued to the uMCTL2. FOR PERFORMANCE ONLY.
+		PSU_DDRC_RFSHCTL0_REFRESH_TO_X32                                                0x10
+
+		The programmed value + 1 is the number of refresh timeouts that is allowed to accumulate before traffic is blocked and the re
+		reshes are forced to execute. Closing pages to perform a refresh is a one-time penalty that must be paid for each group of re
+		reshes. Therefore, performing refreshes in a burst reduces the per-refresh penalty of these page closings. Higher numbers for
+		RFSHCTL.refresh_burst slightly increases utilization; lower numbers decreases the worst-case latency associated with refreshe
+		. - 0 - single refresh - 1 - burst-of-2 refresh - 7 - burst-of-8 refresh For information on burst refresh feature refer to se
+		tion 3.9 of DDR2 JEDEC specification - JESD79-2F.pdf. For DDR2/3, the refresh is always per-rank and not per-bank. The rank r
+		fresh can be accumulated over 8*tREFI cycles using the burst refresh feature. In DDR4 mode, according to Fine Granularity fea
+		ure, 8 refreshes can be postponed in 1X mode, 16 refreshes in 2X mode and 32 refreshes in 4X mode. If using PHY-initiated upd
+		tes, care must be taken in the setting of RFSHCTL0.refresh_burst, to ensure that tRFCmax is not violated due to a PHY-initiat
+		d update occurring shortly before a refresh burst was due. In this situation, the refresh burst will be delayed until the PHY
+		initiated update is complete.
+		PSU_DDRC_RFSHCTL0_REFRESH_BURST                                                 0x0
+
+		- 1 - Per bank refresh; - 0 - All bank refresh. Per bank refresh allows traffic to flow to other banks. Per bank refresh is n
+		t supported by all LPDDR2 devices but should be supported by all LPDDR3/LPDDR4 devices. Present only in designs configured to
+		support LPDDR2/LPDDR3/LPDDR4
+		PSU_DDRC_RFSHCTL0_PER_BANK_REFRESH                                              0x0
+
+		Refresh Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070050, 0x00F1F1F4U ,0x00210000U)  
+		RegMask = (DDRC_RFSHCTL0_REFRESH_MARGIN_MASK | DDRC_RFSHCTL0_REFRESH_TO_X32_MASK | DDRC_RFSHCTL0_REFRESH_BURST_MASK | DDRC_RFSHCTL0_PER_BANK_REFRESH_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_RFSHCTL0_REFRESH_MARGIN_SHIFT
+			| 0x00000010U << DDRC_RFSHCTL0_REFRESH_TO_X32_SHIFT
+			| 0x00000000U << DDRC_RFSHCTL0_REFRESH_BURST_SHIFT
+			| 0x00000000U << DDRC_RFSHCTL0_PER_BANK_REFRESH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RFSHCTL0_OFFSET ,0x00F1F1F4U ,0x00210000U);
+	/*############################################################################################################################ */
+
+		/*Register : RFSHCTL3 @ 0XFD070060

+
+		Fine Granularity Refresh Mode - 000 - Fixed 1x (Normal mode) - 001 - Fixed 2x - 010 - Fixed 4x - 101 - Enable on the fly 2x (
+		ot supported) - 110 - Enable on the fly 4x (not supported) - Everything else - reserved Note: The on-the-fly modes is not sup
+		orted in this version of the uMCTL2. Note: This must be set up while the Controller is in reset or while the Controller is in
+		self-refresh mode. Changing this during normal operation is not allowed. Making this a dynamic register will be supported in 
+		uture version of the uMCTL2.
+		PSU_DDRC_RFSHCTL3_REFRESH_MODE                                                  0x0
+
+		Toggle this signal (either from 0 to 1 or from 1 to 0) to indicate that the refresh register(s) have been updated. The value 
+		s automatically updated when exiting reset, so it does not need to be toggled initially.
+		PSU_DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL                                          0x0
+
+		When '1', disable auto-refresh generated by the uMCTL2. When auto-refresh is disabled, the SoC core must generate refreshes u
+		ing the registers reg_ddrc_rank0_refresh, reg_ddrc_rank1_refresh, reg_ddrc_rank2_refresh and reg_ddrc_rank3_refresh. When dis
+		auto_refresh transitions from 0 to 1, any pending refreshes are immediately scheduled by the uMCTL2. If DDR4 CRC/parity retry
+		is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), disable auto-refresh is not supported, and this bit must be set to '0'. 
+		his register field is changeable on the fly.
+		PSU_DDRC_RFSHCTL3_DIS_AUTO_REFRESH                                              0x1
+
+		Refresh Control Register 3
+		(OFFSET, MASK, VALUE)      (0XFD070060, 0x00000073U ,0x00000001U)  
+		RegMask = (DDRC_RFSHCTL3_REFRESH_MODE_MASK | DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_MASK | DDRC_RFSHCTL3_DIS_AUTO_REFRESH_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_RFSHCTL3_REFRESH_MODE_SHIFT
+			| 0x00000000U << DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_SHIFT
+			| 0x00000001U << DDRC_RFSHCTL3_DIS_AUTO_REFRESH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RFSHCTL3_OFFSET ,0x00000073U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : RFSHTMG @ 0XFD070064

+
+		tREFI: Average time interval between refreshes per rank (Specification: 7.8us for DDR2, DDR3 and DDR4. See JEDEC specificatio
+		 for mDDR, LPDDR2, LPDDR3 and LPDDR4). For LPDDR2/LPDDR3/LPDDR4: - if using all-bank refreshes (RFSHCTL0.per_bank_refresh = 0
+		, this register should be set to tREFIab - if using per-bank refreshes (RFSHCTL0.per_bank_refresh = 1), this register should 
+		e set to tREFIpb For configurations with MEMC_FREQ_RATIO=2, program this to (tREFI/2), no rounding up. In DDR4 mode, tREFI va
+		ue is different depending on the refresh mode. The user should program the appropriate value from the spec based on the value
+		programmed in the refresh mode register. Note that RFSHTMG.t_rfc_nom_x32 * 32 must be greater than RFSHTMG.t_rfc_min, and RFS
+		TMG.t_rfc_nom_x32 must be greater than 0x1. Unit: Multiples of 32 clocks.
+		PSU_DDRC_RFSHTMG_T_RFC_NOM_X32                                                  0x82
+
+		Used only when LPDDR3 memory type is connected. Should only be changed when uMCTL2 is in reset. Specifies whether to use the 
+		REFBW parameter (required by some LPDDR3 devices which comply with earlier versions of the LPDDR3 JEDEC specification) or not
+		 - 0 - tREFBW parameter not used - 1 - tREFBW parameter used
+		PSU_DDRC_RFSHTMG_LPDDR3_TREFBW_EN                                               0x1
+
+		tRFC (min): Minimum time from refresh to refresh or activate. For MEMC_FREQ_RATIO=1 configurations, t_rfc_min should be set t
+		 RoundUp(tRFCmin/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rfc_min should be set to RoundUp(RoundUp(tRFCmin/tCK)/2). In L
+		DDR2/LPDDR3/LPDDR4 mode: - if using all-bank refreshes, the tRFCmin value in the above equations is equal to tRFCab - if usin
+		 per-bank refreshes, the tRFCmin value in the above equations is equal to tRFCpb In DDR4 mode, the tRFCmin value in the above
+		equations is different depending on the refresh mode (fixed 1X,2X,4X) and the device density. The user should program the app
+		opriate value from the spec based on the 'refresh_mode' and the device density that is used. Unit: Clocks.
+		PSU_DDRC_RFSHTMG_T_RFC_MIN                                                      0x8b
+
+		Refresh Timing Register
+		(OFFSET, MASK, VALUE)      (0XFD070064, 0x0FFF83FFU ,0x0082808BU)  
+		RegMask = (DDRC_RFSHTMG_T_RFC_NOM_X32_MASK | DDRC_RFSHTMG_LPDDR3_TREFBW_EN_MASK | DDRC_RFSHTMG_T_RFC_MIN_MASK |  0 );
+
+		RegVal = ((0x00000082U << DDRC_RFSHTMG_T_RFC_NOM_X32_SHIFT
+			| 0x00000001U << DDRC_RFSHTMG_LPDDR3_TREFBW_EN_SHIFT
+			| 0x0000008BU << DDRC_RFSHTMG_T_RFC_MIN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RFSHTMG_OFFSET ,0x0FFF83FFU ,0x0082808BU);
+	/*############################################################################################################################ */
+
+		/*Register : ECCCFG0 @ 0XFD070070

+
+		Disable ECC scrubs. Valid only when ECCCFG0.ecc_mode = 3'b100 and MEMC_USE_RMW is defined
+		PSU_DDRC_ECCCFG0_DIS_SCRUB                                                      0x1
+
+		ECC mode indicator - 000 - ECC disabled - 100 - ECC enabled - SEC/DED over 1 beat - all other settings are reserved for futur
+		 use
+		PSU_DDRC_ECCCFG0_ECC_MODE                                                       0x0
+
+		ECC Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070070, 0x00000017U ,0x00000010U)  
+		RegMask = (DDRC_ECCCFG0_DIS_SCRUB_MASK | DDRC_ECCCFG0_ECC_MODE_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_ECCCFG0_DIS_SCRUB_SHIFT
+			| 0x00000000U << DDRC_ECCCFG0_ECC_MODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ECCCFG0_OFFSET ,0x00000017U ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : ECCCFG1 @ 0XFD070074

+
+		Selects whether to poison 1 or 2 bits - if 0 -> 2-bit (uncorrectable) data poisoning, if 1 -> 1-bit (correctable) data poison
+		ng, if ECCCFG1.data_poison_en=1
+		PSU_DDRC_ECCCFG1_DATA_POISON_BIT                                                0x0
+
+		Enable ECC data poisoning - introduces ECC errors on writes to address specified by the ECCPOISONADDR0/1 registers
+		PSU_DDRC_ECCCFG1_DATA_POISON_EN                                                 0x0
+
+		ECC Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070074, 0x00000003U ,0x00000000U)  
+		RegMask = (DDRC_ECCCFG1_DATA_POISON_BIT_MASK | DDRC_ECCCFG1_DATA_POISON_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ECCCFG1_DATA_POISON_BIT_SHIFT
+			| 0x00000000U << DDRC_ECCCFG1_DATA_POISON_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ECCCFG1_OFFSET ,0x00000003U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : CRCPARCTL1 @ 0XFD0700C4

+
+		The maximum number of DFI PHY clock cycles allowed from the assertion of the dfi_rddata_en signal to the assertion of each of
+		the corresponding bits of the dfi_rddata_valid signal. This corresponds to the DFI timing parameter tphy_rdlat. Refer to PHY 
+		pecification for correct value. This value it only used for detecting read data timeout when DDR4 retry is enabled by CRCPARC
+		L1.crc_parity_retry_enable=1. Maximum supported value: - 1:1 Frequency mode : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_
+		dlat < 'd114 - 1:2 Frequency mode ANDAND DFITMG0.dfi_rddata_use_sdr == 1 : CRCPARCTL1.dfi_t_phy_rdlat < 64 - 1:2 Frequency mo
+		e ANDAND DFITMG0.dfi_rddata_use_sdr == 0 : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_rdlat < 'd114 Unit: DFI Clocks
+		PSU_DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT                                             0x10
+
+		After a Parity or CRC error is flagged on dfi_alert_n signal, the software has an option to read the mode registers in the DR
+		M before the hardware begins the retry process - 1: Wait for software to read/write the mode registers before hardware begins
+		the retry. After software is done with its operations, it will clear the alert interrupt register bit - 0: Hardware can begin
+		the retry right away after the dfi_alert_n pulse goes away. The value on this register is valid only when retry is enabled (P
+		RCTRL.crc_parity_retry_enable = 1) If this register is set to 1 and if the software doesn't clear the interrupt register afte
+		 handling the parity/CRC error, then the hardware will not begin the retry process and the system will hang. In the case of P
+		rity/CRC error, there are two possibilities when the software doesn't reset MR5[4] to 0. - (i) If 'Persistent parity' mode re
+		ister bit is NOT set: the commands sent during retry and normal operation are executed without parity checking. The value in 
+		he Parity error log register MPR Page 1 is valid. - (ii) If 'Persistent parity' mode register bit is SET: Parity checking is 
+		one for commands sent during retry and normal operation. If multiple errors occur before MR5[4] is cleared, the error log in 
+		PR Page 1 should be treated as 'Don't care'.
+		PSU_DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW                                           0x1
+
+		- 1: Enable command retry mechanism in case of C/A Parity or CRC error - 0: Disable command retry mechanism when C/A Parity o
+		 CRC features are enabled. Note that retry functionality is not supported if burst chop is enabled (MSTR.burstchop = 1) and/o
+		 disable auto-refresh is enabled (RFSHCTL3.dis_auto_refresh = 1)
+		PSU_DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE                                     0x0
+
+		CRC Calculation setting register - 1: CRC includes DM signal - 0: CRC not includes DM signal Present only in designs configur
+		d to support DDR4.
+		PSU_DDRC_CRCPARCTL1_CRC_INC_DM                                                  0x0
+
+		CRC enable Register - 1: Enable generation of CRC - 0: Disable generation of CRC The setting of this register should match th
+		 CRC mode register setting in the DRAM.
+		PSU_DDRC_CRCPARCTL1_CRC_ENABLE                                                  0x0
+
+		C/A Parity enable register - 1: Enable generation of C/A parity and detection of C/A parity error - 0: Disable generation of 
+		/A parity and disable detection of C/A parity error If RCD's parity error detection or SDRAM's parity detection is enabled, t
+		is register should be 1.
+		PSU_DDRC_CRCPARCTL1_PARITY_ENABLE                                               0x0
+
+		CRC Parity Control Register1
+		(OFFSET, MASK, VALUE)      (0XFD0700C4, 0x3F000391U ,0x10000200U)  
+		RegMask = (DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_MASK | DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_MASK | DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_MASK | DDRC_CRCPARCTL1_CRC_INC_DM_MASK | DDRC_CRCPARCTL1_CRC_ENABLE_MASK | DDRC_CRCPARCTL1_PARITY_ENABLE_MASK |  0 );
+
+		RegVal = ((0x00000010U << DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_SHIFT
+			| 0x00000001U << DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_CRC_INC_DM_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_CRC_ENABLE_SHIFT
+			| 0x00000000U << DDRC_CRCPARCTL1_PARITY_ENABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_CRCPARCTL1_OFFSET ,0x3F000391U ,0x10000200U);
+	/*############################################################################################################################ */
+
+		/*Register : CRCPARCTL2 @ 0XFD0700C8

+
+		Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a parity error occurs. Recommended values
+		 - tPAR_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tPAR_ALERT_PW.MAX/2 and round up to next inte
+		er value. Values of 0, 1 and 2 are illegal. This value must be greater than CRCPARCTL2.t_crc_alert_pw_max.
+		PSU_DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX                                          0x40
+
+		Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a CRC error occurs. Recommended values: -
+		tCRC_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tCRC_ALERT_PW.MAX/2 and round up to next integer
+		value. Values of 0, 1 and 2 are illegal. This value must be less than CRCPARCTL2.t_par_alert_pw_max.
+		PSU_DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX                                          0x5
+
+		Indicates the maximum duration in number of DRAM clock cycles for which a command should be held in the Command Retry FIFO be
+		ore it is popped out. Every location in the Command Retry FIFO has an associated down counting timer that will use this regis
+		er as the start value. The down counting starts when a command is loaded into the FIFO. The timer counts down every 4 DRAM cy
+		les. When the counter reaches zero, the entry is popped from the FIFO. All the counters are frozen, if a C/A Parity or CRC er
+		or occurs before the counter reaches zero. The counter is reset to 0, after all the commands in the FIFO are retried. Recomme
+		ded(minimum) values: - Only C/A Parity is enabled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + tPAR_ALERT_ON
+		max + tPAR_UNKNOWN + PHY Alert Latency(DRAM CLK) + board delay) / 4) + 2 - Both C/A Parity and CRC is enabled/ Only CRC is en
+		bled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + WL + 5(BL10)+ tCRC_ALERT.max + PHY Alert Latency(DRAM CLK)
+		+ board delay) / 4) + 2 Note 1: All value (e.g. tPAR_ALERT_ON) should be in terms of DRAM Clock and round up Note 2: Board de
+		ay(Command/Alert_n) should be considered. Note 3: Use the worst case(longer) value for PHY Latencies/Board delay Note 4: The 
+		ecommended values are minimum value to be set. For mode detail, See 'Calculation of FIFO Depth' section. Max value can be set
+		to this register is defined below: - MEMC_BURST_LENGTH == 16 Full bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-
+		 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Half bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_D
+		PTH-4 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-6 Quarter bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CM
+		_FIFO_DEPTH-8 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-12 - MEMC_BURST_LENGTH != 16 Full bus Mode (C
+		C=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-1 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mo
+		e (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Quarte
+		 bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-4 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEP
+		H-6 Values of 0, 1 and 2 are illegal.
+		PSU_DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4                                0x1f
+
+		CRC Parity Control Register2
+		(OFFSET, MASK, VALUE)      (0XFD0700C8, 0x01FF1F3FU ,0x0040051FU)  
+		RegMask = (DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_MASK | DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_MASK | DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_MASK |  0 );
+
+		RegVal = ((0x00000040U << DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_SHIFT
+			| 0x00000005U << DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_SHIFT
+			| 0x0000001FU << DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_CRCPARCTL2_OFFSET ,0x01FF1F3FU ,0x0040051FU);
+	/*############################################################################################################################ */
+
+		/*Register : INIT0 @ 0XFD0700D0

+
+		If lower bit is enabled the SDRAM initialization routine is skipped. The upper bit decides what state the controller starts u
+		 in when reset is removed - 00 - SDRAM Intialization routine is run after power-up - 01 - SDRAM Intialization routine is skip
+		ed after power-up. Controller starts up in Normal Mode - 11 - SDRAM Intialization routine is skipped after power-up. Controll
+		r starts up in Self-refresh Mode - 10 - SDRAM Intialization routine is run after power-up. Note: The only 2'b00 is supported 
+		or LPDDR4 in this version of the uMCTL2.
+		PSU_DDRC_INIT0_SKIP_DRAM_INIT                                                   0x0
+
+		Cycles to wait after driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clocks. DDR2 typically requires 
+		 400 ns delay, requiring this value to be programmed to 2 at all clock speeds. LPDDR2/LPDDR3 typically requires this to be pr
+		grammed for a delay of 200 us. LPDDR4 typically requires this to be programmed for a delay of 2 us. For configurations with M
+		MC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it up to next integer value.
+		PSU_DDRC_INIT0_POST_CKE_X1024                                                   0x2
+
+		Cycles to wait after reset before driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clock cycles. DDR2 
+		pecifications typically require this to be programmed for a delay of >= 200 us. LPDDR2/LPDDR3: tINIT1 of 100 ns (min) LPDDR4:
+		tINIT3 of 2 ms (min) For configurations with MEMC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it u
+		 to next integer value.
+		PSU_DDRC_INIT0_PRE_CKE_X1024                                                    0x106
+
+		SDRAM Initialization Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0700D0, 0xC3FF0FFFU ,0x00020106U)  
+		RegMask = (DDRC_INIT0_SKIP_DRAM_INIT_MASK | DDRC_INIT0_POST_CKE_X1024_MASK | DDRC_INIT0_PRE_CKE_X1024_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_INIT0_SKIP_DRAM_INIT_SHIFT
+			| 0x00000002U << DDRC_INIT0_POST_CKE_X1024_SHIFT
+			| 0x00000106U << DDRC_INIT0_PRE_CKE_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT0_OFFSET ,0xC3FF0FFFU ,0x00020106U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT1 @ 0XFD0700D4

+
+		Number of cycles to assert SDRAM reset signal during init sequence. This is only present for designs supporting DDR3, DDR4 or
+		LPDDR4 devices. For use with a DDR PHY, this should be set to a minimum of 1
+		PSU_DDRC_INIT1_DRAM_RSTN_X1024                                                  0x2
+
+		Cycles to wait after completing the SDRAM initialization sequence before starting the dynamic scheduler. Unit: Counts of a gl
+		bal timer that pulses every 32 clock cycles. There is no known specific requirement for this; it may be set to zero.
+		PSU_DDRC_INIT1_FINAL_WAIT_X32                                                   0x0
+
+		Wait period before driving the OCD complete command to SDRAM. Unit: Counts of a global timer that pulses every 32 clock cycle
+		. There is no known specific requirement for this; it may be set to zero.
+		PSU_DDRC_INIT1_PRE_OCD_X32                                                      0x0
+
+		SDRAM Initialization Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0700D4, 0x01FF7F0FU ,0x00020000U)  
+		RegMask = (DDRC_INIT1_DRAM_RSTN_X1024_MASK | DDRC_INIT1_FINAL_WAIT_X32_MASK | DDRC_INIT1_PRE_OCD_X32_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_INIT1_DRAM_RSTN_X1024_SHIFT
+			| 0x00000000U << DDRC_INIT1_FINAL_WAIT_X32_SHIFT
+			| 0x00000000U << DDRC_INIT1_PRE_OCD_X32_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT1_OFFSET ,0x01FF7F0FU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT2 @ 0XFD0700D8

+
+		Idle time after the reset command, tINIT4. Present only in designs configured to support LPDDR2. Unit: 32 clock cycles.
+		PSU_DDRC_INIT2_IDLE_AFTER_RESET_X32                                             0x23
+
+		Time to wait after the first CKE high, tINIT2. Present only in designs configured to support LPDDR2/LPDDR3. Unit: 1 clock cyc
+		e. LPDDR2/LPDDR3 typically requires 5 x tCK delay.
+		PSU_DDRC_INIT2_MIN_STABLE_CLOCK_X1                                              0x5
+
+		SDRAM Initialization Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0700D8, 0x0000FF0FU ,0x00002305U)  
+		RegMask = (DDRC_INIT2_IDLE_AFTER_RESET_X32_MASK | DDRC_INIT2_MIN_STABLE_CLOCK_X1_MASK |  0 );
+
+		RegVal = ((0x00000023U << DDRC_INIT2_IDLE_AFTER_RESET_X32_SHIFT
+			| 0x00000005U << DDRC_INIT2_MIN_STABLE_CLOCK_X1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT2_OFFSET ,0x0000FF0FU ,0x00002305U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT3 @ 0XFD0700DC

+
+		DDR2: Value to write to MR register. Bit 8 is for DLL and the setting here is ignored. The uMCTL2 sets this bit appropriately
+		 DDR3/DDR4: Value loaded into MR0 register. mDDR: Value to write to MR register. LPDDR2/LPDDR3/LPDDR4 - Value to write to MR1
+		register
+		PSU_DDRC_INIT3_MR                                                               0x930
+
+		DDR2: Value to write to EMR register. Bits 9:7 are for OCD and the setting in this register is ignored. The uMCTL2 sets those
+		bits appropriately. DDR3/DDR4: Value to write to MR1 register Set bit 7 to 0. If PHY-evaluation mode training is enabled, thi
+		 bit is set appropriately by the uMCTL2 during write leveling. mDDR: Value to write to EMR register. LPDDR2/LPDDR3/LPDDR4 - V
+		lue to write to MR2 register
+		PSU_DDRC_INIT3_EMR                                                              0x301
+
+		SDRAM Initialization Register 3
+		(OFFSET, MASK, VALUE)      (0XFD0700DC, 0xFFFFFFFFU ,0x09300301U)  
+		RegMask = (DDRC_INIT3_MR_MASK | DDRC_INIT3_EMR_MASK |  0 );
+
+		RegVal = ((0x00000930U << DDRC_INIT3_MR_SHIFT
+			| 0x00000301U << DDRC_INIT3_EMR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT3_OFFSET ,0xFFFFFFFFU ,0x09300301U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT4 @ 0XFD0700E0

+
+		DDR2: Value to write to EMR2 register. DDR3/DDR4: Value to write to MR2 register LPDDR2/LPDDR3/LPDDR4: Value to write to MR3 
+		egister mDDR: Unused
+		PSU_DDRC_INIT4_EMR2                                                             0x20
+
+		DDR2: Value to write to EMR3 register. DDR3/DDR4: Value to write to MR3 register mDDR/LPDDR2/LPDDR3: Unused LPDDR4: Value to 
+		rite to MR13 register
+		PSU_DDRC_INIT4_EMR3                                                             0x200
+
+		SDRAM Initialization Register 4
+		(OFFSET, MASK, VALUE)      (0XFD0700E0, 0xFFFFFFFFU ,0x00200200U)  
+		RegMask = (DDRC_INIT4_EMR2_MASK | DDRC_INIT4_EMR3_MASK |  0 );
+
+		RegVal = ((0x00000020U << DDRC_INIT4_EMR2_SHIFT
+			| 0x00000200U << DDRC_INIT4_EMR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT4_OFFSET ,0xFFFFFFFFU ,0x00200200U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT5 @ 0XFD0700E4

+
+		ZQ initial calibration, tZQINIT. Present only in designs configured to support DDR3 or DDR4 or LPDDR2/LPDDR3. Unit: 32 clock 
+		ycles. DDR3 typically requires 512 clocks. DDR4 requires 1024 clocks. LPDDR2/LPDDR3 requires 1 us.
+		PSU_DDRC_INIT5_DEV_ZQINIT_X32                                                   0x21
+
+		Maximum duration of the auto initialization, tINIT5. Present only in designs configured to support LPDDR2/LPDDR3. LPDDR2/LPDD
+		3 typically requires 10 us.
+		PSU_DDRC_INIT5_MAX_AUTO_INIT_X1024                                              0x4
+
+		SDRAM Initialization Register 5
+		(OFFSET, MASK, VALUE)      (0XFD0700E4, 0x00FF03FFU ,0x00210004U)  
+		RegMask = (DDRC_INIT5_DEV_ZQINIT_X32_MASK | DDRC_INIT5_MAX_AUTO_INIT_X1024_MASK |  0 );
+
+		RegVal = ((0x00000021U << DDRC_INIT5_DEV_ZQINIT_X32_SHIFT
+			| 0x00000004U << DDRC_INIT5_MAX_AUTO_INIT_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT5_OFFSET ,0x00FF03FFU ,0x00210004U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT6 @ 0XFD0700E8

+
+		DDR4- Value to be loaded into SDRAM MR4 registers. Used in DDR4 designs only.
+		PSU_DDRC_INIT6_MR4                                                              0x0
+
+		DDR4- Value to be loaded into SDRAM MR5 registers. Used in DDR4 designs only.
+		PSU_DDRC_INIT6_MR5                                                              0x6c0
+
+		SDRAM Initialization Register 6
+		(OFFSET, MASK, VALUE)      (0XFD0700E8, 0xFFFFFFFFU ,0x000006C0U)  
+		RegMask = (DDRC_INIT6_MR4_MASK | DDRC_INIT6_MR5_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_INIT6_MR4_SHIFT
+			| 0x000006C0U << DDRC_INIT6_MR5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT6_OFFSET ,0xFFFFFFFFU ,0x000006C0U);
+	/*############################################################################################################################ */
+
+		/*Register : INIT7 @ 0XFD0700EC

+
+		DDR4- Value to be loaded into SDRAM MR6 registers. Used in DDR4 designs only.
+		PSU_DDRC_INIT7_MR6                                                              0x819
+
+		SDRAM Initialization Register 7
+		(OFFSET, MASK, VALUE)      (0XFD0700EC, 0xFFFF0000U ,0x08190000U)  
+		RegMask = (DDRC_INIT7_MR6_MASK |  0 );
+
+		RegVal = ((0x00000819U << DDRC_INIT7_MR6_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_INIT7_OFFSET ,0xFFFF0000U ,0x08190000U);
+	/*############################################################################################################################ */
+
+		/*Register : DIMMCTL @ 0XFD0700F0

+
+		Disabling Address Mirroring for BG bits. When this is set to 1, BG0 and BG1 are NOT swapped even if Address Mirroring is enab
+		ed. This will be required for DDR4 DIMMs with x16 devices. - 1 - BG0 and BG1 are NOT swapped. - 0 - BG0 and BG1 are swapped i
+		 address mirroring is enabled.
+		PSU_DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING                                          0x0
+
+		Enable for BG1 bit of MRS command. BG1 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have BG1 are attached and both the CA parity and the Output 
+		nversion are enabled, this must be set to 0, so that the calculation of CA parity will not include BG1 bit. Note: This has no
+		effect on the address of any other memory accesses, or of software-driven mode register accesses. If address mirroring is ena
+		led, this is applied to BG1 of even ranks and BG0 of odd ranks. - 1 - Enabled - 0 - Disabled
+		PSU_DDRC_DIMMCTL_MRS_BG1_EN                                                     0x1
+
+		Enable for A17 bit of MRS command. A17 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have A17 are attached and the Output Inversion are enabled, 
+		his must be set to 0, so that the calculation of CA parity will not include A17 bit. Note: This has no effect on the address 
+		f any other memory accesses, or of software-driven mode register accesses. - 1 - Enabled - 0 - Disabled
+		PSU_DDRC_DIMMCTL_MRS_A17_EN                                                     0x0
+
+		Output Inversion Enable (for DDR4 RDIMM implementations only). DDR4 RDIMM implements the Output Inversion feature by default,
+		which means that the following address, bank address and bank group bits of B-side DRAMs are inverted: A3-A9, A11, A13, A17, 
+		A0-BA1, BG0-BG1. Setting this bit ensures that, for mode register accesses generated by the uMCTL2 during the automatic initi
+		lization routine and enabling of a particular DDR4 feature, separate A-side and B-side mode register accesses are generated. 
+		or B-side mode register accesses, these bits are inverted within the uMCTL2 to compensate for this RDIMM inversion. Note: Thi
+		 has no effect on the address of any other memory accesses, or of software-driven mode register accesses. - 1 - Implement out
+		ut inversion for B-side DRAMs. - 0 - Do not implement output inversion for B-side DRAMs.
+		PSU_DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN                                             0x0
+
+		Address Mirroring Enable (for multi-rank UDIMM implementations and multi-rank DDR4 RDIMM implementations). Some UDIMMs and DD
+		4 RDIMMs implement address mirroring for odd ranks, which means that the following address, bank address and bank group bits 
+		re swapped: (A3, A4), (A5, A6), (A7, A8), (BA0, BA1) and also (A11, A13), (BG0, BG1) for the DDR4. Setting this bit ensures t
+		at, for mode register accesses during the automatic initialization routine, these bits are swapped within the uMCTL2 to compe
+		sate for this UDIMM/RDIMM swapping. In addition to the automatic initialization routine, in case of DDR4 UDIMM/RDIMM, they ar
+		 swapped during the automatic MRS access to enable/disable of a particular DDR4 feature. Note: This has no effect on the addr
+		ss of any other memory accesses, or of software-driven mode register accesses. This is not supported for mDDR, LPDDR2, LPDDR3
+		or LPDDR4 SDRAMs. Note: In case of x16 DDR4 DIMMs, BG1 output of MRS for the odd ranks is same as BG0 because BG1 is invalid,
+		hence dimm_dis_bg_mirroring register must be set to 1. - 1 - For odd ranks, implement address mirroring for MRS commands to d
+		ring initialization and for any automatic DDR4 MRS commands (to be used if UDIMM/RDIMM implements address mirroring) - 0 - Do
+		not implement address mirroring
+		PSU_DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN                                              0x0
+
+		Staggering enable for multi-rank accesses (for multi-rank UDIMM and RDIMM implementations only). This is not supported for mD
+		R, LPDDR2, LPDDR3 or LPDDR4 SDRAMs. Note: Even if this bit is set it does not take care of software driven MR commands (via M
+		CTRL0/MRCTRL1), where software is responsible to send them to seperate ranks as appropriate. - 1 - (DDR4) Send MRS commands t
+		 each ranks seperately - 1 - (non-DDR4) Send all commands to even and odd ranks seperately - 0 - Do not stagger accesses
+		PSU_DDRC_DIMMCTL_DIMM_STAGGER_CS_EN                                             0x0
+
+		DIMM Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0700F0, 0x0000003FU ,0x00000010U)  
+		RegMask = (DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_MASK | DDRC_DIMMCTL_MRS_BG1_EN_MASK | DDRC_DIMMCTL_MRS_A17_EN_MASK | DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_MASK | DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_MASK | DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_SHIFT
+			| 0x00000001U << DDRC_DIMMCTL_MRS_BG1_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_MRS_A17_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_SHIFT
+			| 0x00000000U << DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DIMMCTL_OFFSET ,0x0000003FU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : RANKCTL @ 0XFD0700F4

+
+		Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e writes to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should c
+		nsider both PHY requirement and ODT requirement. - PHY requirement: tphy_wrcsgap + 1 (see PHY databook for value of tphy_wrcs
+		ap) If CRC feature is enabled, should be increased by 1. If write preamble is set to 2tCK(DDR4/LPDDR4 only), should be increa
+		ed by 1. If write postamble is set to 1.5tCK(LPDDR4 only), should be increased by 1. - ODT requirement: The value programmed 
+		n this register takes care of the ODT switch off timing requirement when switching ranks during writes. For LPDDR4, the requi
+		ement is ODTLoff - ODTLon - BL/2 + 1 For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY requirement
+		or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and round it u
+		 to the next integer.
+		PSU_DDRC_RANKCTL_DIFF_RANK_WR_GAP                                               0x6
+
+		Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e reads to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should co
+		sider both PHY requirement and ODT requirement. - PHY requirement: tphy_rdcsgap + 1 (see PHY databook for value of tphy_rdcsg
+		p) If read preamble is set to 2tCK(DDR4/LPDDR4 only), should be increased by 1. If read postamble is set to 1.5tCK(LPDDR4 onl
+		), should be increased by 1. - ODT requirement: The value programmed in this register takes care of the ODT switch off timing
+		requirement when switching ranks during reads. For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY r
+		quirement or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and 
+		ound it up to the next integer.
+		PSU_DDRC_RANKCTL_DIFF_RANK_RD_GAP                                               0x6
+
+		Only present for multi-rank configurations. Background: Reads to the same rank can be performed back-to-back. Reads to differ
+		nt ranks require additional gap dictated by the register RANKCTL.diff_rank_rd_gap. This is to avoid possible data bus content
+		on as well as to give PHY enough time to switch the delay when changing ranks. The uMCTL2 arbitrates for bus access on a cycl
+		-by-cycle basis; therefore after a read is scheduled, there are few clock cycles (determined by the value on RANKCTL.diff_ran
+		_rd_gap register) in which only reads from the same rank are eligible to be scheduled. This prevents reads from other ranks f
+		om having fair access to the data bus. This parameter represents the maximum number of reads that can be scheduled consecutiv
+		ly to the same rank. After this number is reached, a delay equal to RANKCTL.diff_rank_rd_gap is inserted by the scheduler to 
+		llow all ranks a fair opportunity to be scheduled. Higher numbers increase bandwidth utilization, lower numbers increase fair
+		ess. This feature can be DISABLED by setting this register to 0. When set to 0, the Controller will stay on the same rank as 
+		ong as commands are available for it. Minimum programmable value is 0 (feature disabled) and maximum programmable value is 0x
+		. FOR PERFORMANCE ONLY.
+		PSU_DDRC_RANKCTL_MAX_RANK_RD                                                    0xf
+
+		Rank Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0700F4, 0x00000FFFU ,0x0000066FU)  
+		RegMask = (DDRC_RANKCTL_DIFF_RANK_WR_GAP_MASK | DDRC_RANKCTL_DIFF_RANK_RD_GAP_MASK | DDRC_RANKCTL_MAX_RANK_RD_MASK |  0 );
+
+		RegVal = ((0x00000006U << DDRC_RANKCTL_DIFF_RANK_WR_GAP_SHIFT
+			| 0x00000006U << DDRC_RANKCTL_DIFF_RANK_RD_GAP_SHIFT
+			| 0x0000000FU << DDRC_RANKCTL_MAX_RANK_RD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_RANKCTL_OFFSET ,0x00000FFFU ,0x0000066FU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG0 @ 0XFD070100

+
+		Minimum time between write and precharge to same bank. Unit: Clocks Specifications: WL + BL/2 + tWR = approximately 8 cycles 
+		 15 ns = 14 clocks @400MHz and less for lower frequencies where: - WL = write latency - BL = burst length. This must match th
+		 value programmed in the BL bit of the mode register to the SDRAM. BST (burst terminate) is not supported at present. - tWR =
+		Write recovery time. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 for this 
+		arameter. For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For configurations
+		with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer value.
+		PSU_DDRC_DRAMTMG0_WR2PRE                                                        0x11
+
+		tFAW Valid only when 8 or more banks(or banks x bank groups) are present. In 8-bank design, at most 4 banks must be activated
+		in a rolling window of tFAW cycles. For configurations with MEMC_FREQ_RATIO=2, program this to (tFAW/2) and round up to next 
+		nteger value. In a 4-bank design, set this register to 0x1 independent of the MEMC_FREQ_RATIO configuration. Unit: Clocks
+		PSU_DDRC_DRAMTMG0_T_FAW                                                         0xc
+
+		tRAS(max): Maximum time between activate and precharge to same bank. This is the maximum time that a page can be kept open Mi
+		imum value of this register is 1. Zero is invalid. For configurations with MEMC_FREQ_RATIO=2, program this to (tRAS(max)-1)/2
+		 No rounding up. Unit: Multiples of 1024 clocks.
+		PSU_DDRC_DRAMTMG0_T_RAS_MAX                                                     0x24
+
+		tRAS(min): Minimum time between activate and precharge to the same bank. For configurations with MEMC_FREQ_RATIO=2, 1T mode, 
+		rogram this to tRAS(min)/2. No rounding up. For configurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, program this t
+		 (tRAS(min)/2) and round it up to the next integer value. Unit: Clocks
+		PSU_DDRC_DRAMTMG0_T_RAS_MIN                                                     0x12
+
+		SDRAM Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070100, 0x7F3F7F3FU ,0x110C2412U)  
+		RegMask = (DDRC_DRAMTMG0_WR2PRE_MASK | DDRC_DRAMTMG0_T_FAW_MASK | DDRC_DRAMTMG0_T_RAS_MAX_MASK | DDRC_DRAMTMG0_T_RAS_MIN_MASK |  0 );
+
+		RegVal = ((0x00000011U << DDRC_DRAMTMG0_WR2PRE_SHIFT
+			| 0x0000000CU << DDRC_DRAMTMG0_T_FAW_SHIFT
+			| 0x00000024U << DDRC_DRAMTMG0_T_RAS_MAX_SHIFT
+			| 0x00000012U << DDRC_DRAMTMG0_T_RAS_MIN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG0_OFFSET ,0x7F3F7F3FU ,0x110C2412U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG1 @ 0XFD070104

+
+		tXP: Minimum time after power-down exit to any operation. For DDR3, this should be programmed to tXPDLL if slow powerdown exi
+		 is selected in MR0[12]. If C/A parity for DDR4 is used, set to (tXP+PL) instead. For configurations with MEMC_FREQ_RATIO=2, 
+		rogram this to (tXP/2) and round it up to the next integer value. Units: Clocks
+		PSU_DDRC_DRAMTMG1_T_XP                                                          0x4
+
+		tRTP: Minimum time from read to precharge of same bank. - DDR2: tAL + BL/2 + max(tRTP, 2) - 2 - DDR3: tAL + max (tRTP, 4) - D
+		R4: Max of following two equations: tAL + max (tRTP, 4) or, RL + BL/2 - tRP. - mDDR: BL/2 - LPDDR2: Depends on if it's LPDDR2
+		S2 or LPDDR2-S4: LPDDR2-S2: BL/2 + tRTP - 1. LPDDR2-S4: BL/2 + max(tRTP,2) - 2. - LPDDR3: BL/2 + max(tRTP,4) - 4 - LPDDR4: BL
+		2 + max(tRTP,8) - 8 For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For conf
+		gurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer val
+		e. Unit: Clocks.
+		PSU_DDRC_DRAMTMG1_RD2PRE                                                        0x4
+
+		tRC: Minimum time between activates to same bank. For configurations with MEMC_FREQ_RATIO=2, program this to (tRC/2) and roun
+		 up to next integer value. Unit: Clocks.
+		PSU_DDRC_DRAMTMG1_T_RC                                                          0x19
+
+		SDRAM Timing Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070104, 0x001F1F7FU ,0x00040419U)  
+		RegMask = (DDRC_DRAMTMG1_T_XP_MASK | DDRC_DRAMTMG1_RD2PRE_MASK | DDRC_DRAMTMG1_T_RC_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDRC_DRAMTMG1_T_XP_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG1_RD2PRE_SHIFT
+			| 0x00000019U << DDRC_DRAMTMG1_T_RC_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG1_OFFSET ,0x001F1F7FU ,0x00040419U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG2 @ 0XFD070108

+
+		Set to WL Time from write command to write data on SDRAM interface. This must be set to WL. For mDDR, it should normally be s
+		t to 1. Note that, depending on the PHY, if using RDIMM, it may be necessary to use a value of WL + 1 to compensate for the e
+		tra cycle of latency through the RDIMM For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above
+		equation by 2, and round it up to next integer. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAININ
+		 is set), as the DFI read and write latencies defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
+		PSU_DDRC_DRAMTMG2_WRITE_LATENCY                                                 0x7
+
+		Set to RL Time from read command to read data on SDRAM interface. This must be set to RL. Note that, depending on the PHY, if
+		using RDIMM, it mat be necessary to use a value of RL + 1 to compensate for the extra cycle of latency through the RDIMM For 
+		onfigurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next inte
+		er. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAINING is set), as the DFI read and write latenci
+		s defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
+		PSU_DDRC_DRAMTMG2_READ_LATENCY                                                  0x8
+
+		DDR2/3/mDDR: RL + BL/2 + 2 - WL DDR4: RL + BL/2 + 1 + WR_PREAMBLE - WL LPDDR2/LPDDR3: RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL 
+		PDDR4(DQ ODT is Disabled): RL + BL/2 + RU(tDQSCKmax/tCK) + WR_PREAMBLE + RD_POSTAMBLE - WL LPDDR4(DQ ODT is Enabled) : RL + B
+		/2 + RU(tDQSCKmax/tCK) + RD_POSTAMBLE - ODTLon - RU(tODTon(min)/tCK) Minimum time from read command to write command. Include
+		time for bus turnaround and all per-bank, per-rank, and global constraints. Unit: Clocks. Where: - WL = write latency - BL = 
+		urst length. This must match the value programmed in the BL bit of the mode register to the SDRAM - RL = read latency = CAS l
+		tency - WR_PREAMBLE = write preamble. This is unique to DDR4 and LPDDR4. - RD_POSTAMBLE = read postamble. This is unique to L
+		DDR4. For LPDDR2/LPDDR3/LPDDR4, if derating is enabled (DERATEEN.derate_enable=1), derated tDQSCKmax should be used. For conf
+		gurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
+		PSU_DDRC_DRAMTMG2_RD2WR                                                         0x6
+
+		DDR4: CWL + PL + BL/2 + tWTR_L Others: CWL + BL/2 + tWTR In DDR4, minimum time from write command to read command for same ba
+		k group. In others, minimum time from write command to read command. Includes time for bus turnaround, recovery times, and al
+		 per-bank, per-rank, and global constraints. Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burs
+		 length. This must match the value programmed in the BL bit of the mode register to the SDRAM - tWTR_L = internal write to re
+		d command delay for same bank group. This comes directly from the SDRAM specification. - tWTR = internal write to read comman
+		 delay. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 operation. For configu
+		ations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
+		PSU_DDRC_DRAMTMG2_WR2RD                                                         0xe
+
+		SDRAM Timing Register 2
+		(OFFSET, MASK, VALUE)      (0XFD070108, 0x3F3F3F3FU ,0x0708060EU)  
+		RegMask = (DDRC_DRAMTMG2_WRITE_LATENCY_MASK | DDRC_DRAMTMG2_READ_LATENCY_MASK | DDRC_DRAMTMG2_RD2WR_MASK | DDRC_DRAMTMG2_WR2RD_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDRC_DRAMTMG2_WRITE_LATENCY_SHIFT
+			| 0x00000008U << DDRC_DRAMTMG2_READ_LATENCY_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG2_RD2WR_SHIFT
+			| 0x0000000EU << DDRC_DRAMTMG2_WR2RD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG2_OFFSET ,0x3F3F3F3FU ,0x0708060EU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG3 @ 0XFD07010C

+
+		Time to wait after a mode register write or read (MRW or MRR). Present only in designs configured to support LPDDR2, LPDDR3 o
+		 LPDDR4. LPDDR2 typically requires value of 5. LPDDR3 typically requires value of 10. LPDDR4: Set this to the larger of tMRW 
+		nd tMRWCKEL. For LPDDR2, this register is used for the time from a MRW/MRR to all other commands. For LDPDR3, this register i
+		 used for the time from a MRW/MRR to a MRW/MRR.
+		PSU_DDRC_DRAMTMG3_T_MRW                                                         0x5
+
+		tMRD: Cycles to wait after a mode register write or read. Depending on the connected SDRAM, tMRD represents: DDR2/mDDR: Time 
+		rom MRS to any command DDR3/4: Time from MRS to MRS command LPDDR2: not used LPDDR3/4: Time from MRS to non-MRS command For c
+		nfigurations with MEMC_FREQ_RATIO=2, program this to (tMRD/2) and round it up to the next integer value. If C/A parity for DD
+		4 is used, set to tMRD_PAR(tMOD+PL) instead.
+		PSU_DDRC_DRAMTMG3_T_MRD                                                         0x4
+
+		tMOD: Parameter used only in DDR3 and DDR4. Cycles between load mode command and following non-load mode command. If C/A pari
+		y for DDR4 is used, set to tMOD_PAR(tMOD+PL) instead. Set to tMOD if MEMC_FREQ_RATIO=1, or tMOD/2 (rounded up to next integer
+		 if MEMC_FREQ_RATIO=2. Note that if using RDIMM, depending on the PHY, it may be necessary to use a value of tMOD + 1 or (tMO
+		 + 1)/2 to compensate for the extra cycle of latency applied to mode register writes by the RDIMM chip.
+		PSU_DDRC_DRAMTMG3_T_MOD                                                         0xc
+
+		SDRAM Timing Register 3
+		(OFFSET, MASK, VALUE)      (0XFD07010C, 0x3FF3F3FFU ,0x0050400CU)  
+		RegMask = (DDRC_DRAMTMG3_T_MRW_MASK | DDRC_DRAMTMG3_T_MRD_MASK | DDRC_DRAMTMG3_T_MOD_MASK |  0 );
+
+		RegVal = ((0x00000005U << DDRC_DRAMTMG3_T_MRW_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG3_T_MRD_SHIFT
+			| 0x0000000CU << DDRC_DRAMTMG3_T_MOD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG3_OFFSET ,0x3FF3F3FFU ,0x0050400CU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG4 @ 0XFD070110

+
+		tRCD - tAL: Minimum time from activate to read or write command to same bank. For configurations with MEMC_FREQ_RATIO=2, prog
+		am this to ((tRCD - tAL)/2) and round it up to the next integer value. Minimum value allowed for this register is 1, which im
+		lies minimum (tRCD - tAL) value to be 2 in configurations with MEMC_FREQ_RATIO=2. Unit: Clocks.
+		PSU_DDRC_DRAMTMG4_T_RCD                                                         0x8
+
+		DDR4: tCCD_L: This is the minimum time between two reads or two writes for same bank group. Others: tCCD: This is the minimum
+		time between two reads or two writes. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_L/2 or tCCD/2) and rou
+		d it up to the next integer value. Unit: clocks.
+		PSU_DDRC_DRAMTMG4_T_CCD                                                         0x3
+
+		DDR4: tRRD_L: Minimum time between activates from bank 'a' to bank 'b' for same bank group. Others: tRRD: Minimum time betwee
+		 activates from bank 'a' to bank 'b'For configurations with MEMC_FREQ_RATIO=2, program this to (tRRD_L/2 or tRRD/2) and round
+		it up to the next integer value. Unit: Clocks.
+		PSU_DDRC_DRAMTMG4_T_RRD                                                         0x3
+
+		tRP: Minimum time from precharge to activate of same bank. For MEMC_FREQ_RATIO=1 configurations, t_rp should be set to RoundU
+		(tRP/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rp should be set to RoundDown(RoundUp(tRP/tCK)/2) + 1. For MEMC_FREQ_RATIO
+		2 configurations in LPDDR4, t_rp should be set to RoundUp(RoundUp(tRP/tCK)/2). Unit: Clocks.
+		PSU_DDRC_DRAMTMG4_T_RP                                                          0x9
+
+		SDRAM Timing Register 4
+		(OFFSET, MASK, VALUE)      (0XFD070110, 0x1F0F0F1FU ,0x08030309U)  
+		RegMask = (DDRC_DRAMTMG4_T_RCD_MASK | DDRC_DRAMTMG4_T_CCD_MASK | DDRC_DRAMTMG4_T_RRD_MASK | DDRC_DRAMTMG4_T_RP_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_DRAMTMG4_T_RCD_SHIFT
+			| 0x00000003U << DDRC_DRAMTMG4_T_CCD_SHIFT
+			| 0x00000003U << DDRC_DRAMTMG4_T_RRD_SHIFT
+			| 0x00000009U << DDRC_DRAMTMG4_T_RP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG4_OFFSET ,0x1F0F0F1FU ,0x08030309U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG5 @ 0XFD070114

+
+		This is the time before Self Refresh Exit that CK is maintained as a valid clock before issuing SRX. Specifies the clock stab
+		e time before SRX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEH - DDR2: 1 - DDR3: tCKSRX - DDR4:
+		tCKSRX For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next in
+		eger.
+		PSU_DDRC_DRAMTMG5_T_CKSRX                                                       0x6
+
+		This is the time after Self Refresh Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay afte
+		 SRE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL - DDR2: 1 - DDR3: max (10 ns, 5 tCK) - DDR4: 
+		ax (10 ns, 5 tCK) For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up
+		to next integer.
+		PSU_DDRC_DRAMTMG5_T_CKSRE                                                       0x6
+
+		Minimum CKE low width for Self refresh or Self refresh power down entry to exit timing in memory clock cycles. Recommended se
+		tings: - mDDR: tRFC - LPDDR2: tCKESR - LPDDR3: tCKESR - LPDDR4: max(tCKELPD, tSR) - DDR2: tCKE - DDR3: tCKE + 1 - DDR4: tCKE 
+		 1 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next intege
+		.
+		PSU_DDRC_DRAMTMG5_T_CKESR                                                       0x4
+
+		Minimum number of cycles of CKE HIGH/LOW during power-down and self refresh. - LPDDR2/LPDDR3 mode: Set this to the larger of 
+		CKE or tCKESR - LPDDR4 mode: Set this to the larger of tCKE, tCKELPD or tSR. - Non-LPDDR2/non-LPDDR3/non-LPDDR4 designs: Set 
+		his to tCKE value. For configurations with MEMC_FREQ_RATIO=2, program this to (value described above)/2 and round it up to th
+		 next integer value. Unit: Clocks.
+		PSU_DDRC_DRAMTMG5_T_CKE                                                         0x3
+
+		SDRAM Timing Register 5
+		(OFFSET, MASK, VALUE)      (0XFD070114, 0x0F0F3F1FU ,0x06060403U)  
+		RegMask = (DDRC_DRAMTMG5_T_CKSRX_MASK | DDRC_DRAMTMG5_T_CKSRE_MASK | DDRC_DRAMTMG5_T_CKESR_MASK | DDRC_DRAMTMG5_T_CKE_MASK |  0 );
+
+		RegVal = ((0x00000006U << DDRC_DRAMTMG5_T_CKSRX_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG5_T_CKSRE_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG5_T_CKESR_SHIFT
+			| 0x00000003U << DDRC_DRAMTMG5_T_CKE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG5_OFFSET ,0x0F0F3F1FU ,0x06060403U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG6 @ 0XFD070118

+
+		This is the time after Deep Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after 
+		PDE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, program this to recom
+		ended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3
+		devices.
+		PSU_DDRC_DRAMTMG6_T_CKDPDE                                                      0x1
+
+		This is the time before Deep Power Down Exit that CK is maintained as a valid clock before issuing DPDX. Specifies the clock 
+		table time before DPDX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, pr
+		gram this to recommended value divided by two and round it up to next integer. This is only present for designs supporting mD
+		R or LPDDR2 devices.
+		PSU_DDRC_DRAMTMG6_T_CKDPDX                                                      0x1
+
+		This is the time before Clock Stop Exit that CK is maintained as a valid clock before issuing Clock Stop Exit. Specifies the 
+		lock stable time before next command after Clock Stop Exit. Recommended settings: - mDDR: 1 - LPDDR2: tXP + 2 - LPDDR3: tXP +
+		2 - LPDDR4: tXP + 2 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it 
+		p to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_DRAMTMG6_T_CKCSX                                                       0x4
+
+		SDRAM Timing Register 6
+		(OFFSET, MASK, VALUE)      (0XFD070118, 0x0F0F000FU ,0x01010004U)  
+		RegMask = (DDRC_DRAMTMG6_T_CKDPDE_MASK | DDRC_DRAMTMG6_T_CKDPDX_MASK | DDRC_DRAMTMG6_T_CKCSX_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_DRAMTMG6_T_CKDPDE_SHIFT
+			| 0x00000001U << DDRC_DRAMTMG6_T_CKDPDX_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG6_T_CKCSX_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG6_OFFSET ,0x0F0F000FU ,0x01010004U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG7 @ 0XFD07011C

+
+		This is the time after Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after PDE. 
+		ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t
+		is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L
+		DDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_DRAMTMG7_T_CKPDE                                                       0x1
+
+		This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable
+		time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO=
+		, program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti
+		g mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_DRAMTMG7_T_CKPDX                                                       0x1
+
+		SDRAM Timing Register 7
+		(OFFSET, MASK, VALUE)      (0XFD07011C, 0x00000F0FU ,0x00000101U)  
+		RegMask = (DDRC_DRAMTMG7_T_CKPDE_MASK | DDRC_DRAMTMG7_T_CKPDX_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_DRAMTMG7_T_CKPDE_SHIFT
+			| 0x00000001U << DDRC_DRAMTMG7_T_CKPDX_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG7_OFFSET ,0x00000F0FU ,0x00000101U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG8 @ 0XFD070120

+
+		tXS_FAST: Exit Self Refresh to ZQCL, ZQCS and MRS (only CL, WR, RTP and Geardown mode). For configurations with MEMC_FREQ_RAT
+		O=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Thi
+		 is applicable to only ZQCL/ZQCS commands. Note: Ensure this is less than or equal to t_xs_x32.
+		PSU_DDRC_DRAMTMG8_T_XS_FAST_X32                                                 0x4
+
+		tXS_ABORT: Exit Self Refresh to commands not requiring a locked DLL in Self Refresh Abort. For configurations with MEMC_FREQ_
+		ATIO=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: 
+		nsure this is less than or equal to t_xs_x32.
+		PSU_DDRC_DRAMTMG8_T_XS_ABORT_X32                                                0x4
+
+		tXSDLL: Exit Self Refresh to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the 
+		bove value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and 
+		DR4 SDRAMs.
+		PSU_DDRC_DRAMTMG8_T_XS_DLL_X32                                                  0xd
+
+		tXS: Exit Self Refresh to commands not requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the
+		above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and
+		DDR4 SDRAMs.
+		PSU_DDRC_DRAMTMG8_T_XS_X32                                                      0x6
+
+		SDRAM Timing Register 8
+		(OFFSET, MASK, VALUE)      (0XFD070120, 0x7F7F7F7FU ,0x04040D06U)  
+		RegMask = (DDRC_DRAMTMG8_T_XS_FAST_X32_MASK | DDRC_DRAMTMG8_T_XS_ABORT_X32_MASK | DDRC_DRAMTMG8_T_XS_DLL_X32_MASK | DDRC_DRAMTMG8_T_XS_X32_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDRC_DRAMTMG8_T_XS_FAST_X32_SHIFT
+			| 0x00000004U << DDRC_DRAMTMG8_T_XS_ABORT_X32_SHIFT
+			| 0x0000000DU << DDRC_DRAMTMG8_T_XS_DLL_X32_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG8_T_XS_X32_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG8_OFFSET ,0x7F7F7F7FU ,0x04040D06U);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG9 @ 0XFD070124

+
+		DDR4 Write preamble mode - 0: 1tCK preamble - 1: 2tCK preamble Present only with MEMC_FREQ_RATIO=2
+		PSU_DDRC_DRAMTMG9_DDR4_WR_PREAMBLE                                              0x0
+
+		tCCD_S: This is the minimum time between two reads or two writes for different bank group. For bank switching (from bank 'a' 
+		o bank 'b'), the minimum time is this value + 1. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_S/2) and ro
+		nd it up to the next integer value. Present only in designs configured to support DDR4. Unit: clocks.
+		PSU_DDRC_DRAMTMG9_T_CCD_S                                                       0x2
+
+		tRRD_S: Minimum time between activates from bank 'a' to bank 'b' for different bank group. For configurations with MEMC_FREQ_
+		ATIO=2, program this to (tRRD_S/2) and round it up to the next integer value. Present only in designs configured to support D
+		R4. Unit: Clocks.
+		PSU_DDRC_DRAMTMG9_T_RRD_S                                                       0x2
+
+		CWL + PL + BL/2 + tWTR_S Minimum time from write command to read command for different bank group. Includes time for bus turn
+		round, recovery times, and all per-bank, per-rank, and global constraints. Present only in designs configured to support DDR4
+		 Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burst length. This must match the value programm
+		d in the BL bit of the mode register to the SDRAM - tWTR_S = internal write to read command delay for different bank group. T
+		is comes directly from the SDRAM specification. For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using 
+		he above equation by 2, and round it up to next integer.
+		PSU_DDRC_DRAMTMG9_WR2RD_S                                                       0xb
+
+		SDRAM Timing Register 9
+		(OFFSET, MASK, VALUE)      (0XFD070124, 0x40070F3FU ,0x0002020BU)  
+		RegMask = (DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_MASK | DDRC_DRAMTMG9_T_CCD_S_MASK | DDRC_DRAMTMG9_T_RRD_S_MASK | DDRC_DRAMTMG9_WR2RD_S_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_SHIFT
+			| 0x00000002U << DDRC_DRAMTMG9_T_CCD_S_SHIFT
+			| 0x00000002U << DDRC_DRAMTMG9_T_RRD_S_SHIFT
+			| 0x0000000BU << DDRC_DRAMTMG9_WR2RD_S_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG9_OFFSET ,0x40070F3FU ,0x0002020BU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG11 @ 0XFD07012C

+
+		tXMPDLL: This is the minimum Exit MPSM to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program
+		this to (tXMPDLL/2) and round it up to the next integer value. Present only in designs configured to support DDR4. Unit: Mult
+		ples of 32 clocks.
+		PSU_DDRC_DRAMTMG11_POST_MPSM_GAP_X32                                            0x6f
+
+		tMPX_LH: This is the minimum CS_n Low hold time to CKE rising edge. For configurations with MEMC_FREQ_RATIO=2, program this t
+		 RoundUp(tMPX_LH/2)+1. Present only in designs configured to support DDR4. Unit: clocks.
+		PSU_DDRC_DRAMTMG11_T_MPX_LH                                                     0x7
+
+		tMPX_S: Minimum time CS setup time to CKE. For configurations with MEMC_FREQ_RATIO=2, program this to (tMPX_S/2) and round it
+		up to the next integer value. Present only in designs configured to support DDR4. Unit: Clocks.
+		PSU_DDRC_DRAMTMG11_T_MPX_S                                                      0x1
+
+		tCKMPE: Minimum valid clock requirement after MPSM entry. Present only in designs configured to support DDR4. Unit: Clocks. F
+		r configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next i
+		teger.
+		PSU_DDRC_DRAMTMG11_T_CKMPE                                                      0xe
+
+		SDRAM Timing Register 11
+		(OFFSET, MASK, VALUE)      (0XFD07012C, 0x7F1F031FU ,0x6F07010EU)  
+		RegMask = (DDRC_DRAMTMG11_POST_MPSM_GAP_X32_MASK | DDRC_DRAMTMG11_T_MPX_LH_MASK | DDRC_DRAMTMG11_T_MPX_S_MASK | DDRC_DRAMTMG11_T_CKMPE_MASK |  0 );
+
+		RegVal = ((0x0000006FU << DDRC_DRAMTMG11_POST_MPSM_GAP_X32_SHIFT
+			| 0x00000007U << DDRC_DRAMTMG11_T_MPX_LH_SHIFT
+			| 0x00000001U << DDRC_DRAMTMG11_T_MPX_S_SHIFT
+			| 0x0000000EU << DDRC_DRAMTMG11_T_CKMPE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG11_OFFSET ,0x7F1F031FU ,0x6F07010EU);
+	/*############################################################################################################################ */
+
+		/*Register : DRAMTMG12 @ 0XFD070130

+
+		tCMDCKE: Delay from valid command to CKE input LOW. Set this to the larger of tESCKE or tCMDCKE For configurations with MEMC_
+		REQ_RATIO=2, program this to (max(tESCKE, tCMDCKE)/2) and round it up to next integer value.
+		PSU_DDRC_DRAMTMG12_T_CMDCKE                                                     0x2
+
+		tCKEHCMD: Valid command requirement after CKE input HIGH. For configurations with MEMC_FREQ_RATIO=2, program this to (tCKEHCM
+		/2) and round it up to next integer value.
+		PSU_DDRC_DRAMTMG12_T_CKEHCMD                                                    0x6
+
+		tMRD_PDA: This is the Mode Register Set command cycle time in PDA mode. For configurations with MEMC_FREQ_RATIO=2, program th
+		s to (tMRD_PDA/2) and round it up to next integer value.
+		PSU_DDRC_DRAMTMG12_T_MRD_PDA                                                    0x8
+
+		SDRAM Timing Register 12
+		(OFFSET, MASK, VALUE)      (0XFD070130, 0x00030F1FU ,0x00020608U)  
+		RegMask = (DDRC_DRAMTMG12_T_CMDCKE_MASK | DDRC_DRAMTMG12_T_CKEHCMD_MASK | DDRC_DRAMTMG12_T_MRD_PDA_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_DRAMTMG12_T_CMDCKE_SHIFT
+			| 0x00000006U << DDRC_DRAMTMG12_T_CKEHCMD_SHIFT
+			| 0x00000008U << DDRC_DRAMTMG12_T_MRD_PDA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DRAMTMG12_OFFSET ,0x00030F1FU ,0x00020608U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQCTL0 @ 0XFD070180

+
+		- 1 - Disable uMCTL2 generation of ZQCS/MPC(ZQ calibration) command. Register DBGCMD.zq_calib_short can be used instead to is
+		ue ZQ calibration request from APB module. - 0 - Internally generate ZQCS/MPC(ZQ calibration) commands based on ZQCTL1.t_zq_s
+		ort_interval_x1024. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_DIS_AUTO_ZQ                                                     0x1
+
+		- 1 - Disable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Powerdown exit. Only applicable when run in DDR3
+		or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. - 0 - Enable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Power
+		own exit. Only applicable when run in DDR3 or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. This is only present for designs suppo
+		ting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_DIS_SRX_ZQCL                                                    0x0
+
+		- 1 - Denotes that ZQ resistor is shared between ranks. Means ZQinit/ZQCL/ZQCS/MPC(ZQ calibration) commands are sent to one r
+		nk at a time with tZQinit/tZQCL/tZQCS/tZQCAL/tZQLAT timing met between commands so that commands to different ranks do not ov
+		rlap. - 0 - ZQ resistor is not shared. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_ZQ_RESISTOR_SHARED                                              0x0
+
+		- 1 - Disable issuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. - 0 - Enable 
+		ssuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. This is only present for des
+		gns supporting DDR4 devices.
+		PSU_DDRC_ZQCTL0_DIS_MPSMX_ZQCL                                                  0x0
+
+		tZQoper for DDR3/DDR4, tZQCL for LPDDR2/LPDDR3, tZQCAL for LPDDR4: Number of cycles of NOP required after a ZQCL (ZQ calibrat
+		on long)/MPC(ZQ Start) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2: DDR3/DDR4: program this to tZQo
+		er/2 and round it up to the next integer value. LPDDR2/LPDDR3: program this to tZQCL/2 and round it up to the next integer va
+		ue. LPDDR4: program this to tZQCAL/2 and round it up to the next integer value. Unit: Clock cycles. This is only present for 
+		esigns supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL0_T_ZQ_LONG_NOP                                                   0x100
+
+		tZQCS for DDR3/DD4/LPDDR2/LPDDR3, tZQLAT for LPDDR4: Number of cycles of NOP required after a ZQCS (ZQ calibration short)/MPC
+		ZQ Latch) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2, program this to tZQCS/2 and round it up to t
+		e next integer value. Unit: Clock cycles. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devic
+		s.
+		PSU_DDRC_ZQCTL0_T_ZQ_SHORT_NOP                                                  0x40
+
+		ZQ Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070180, 0xF7FF03FFU ,0x81000040U)  
+		RegMask = (DDRC_ZQCTL0_DIS_AUTO_ZQ_MASK | DDRC_ZQCTL0_DIS_SRX_ZQCL_MASK | DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_MASK | DDRC_ZQCTL0_DIS_MPSMX_ZQCL_MASK | DDRC_ZQCTL0_T_ZQ_LONG_NOP_MASK | DDRC_ZQCTL0_T_ZQ_SHORT_NOP_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_ZQCTL0_DIS_AUTO_ZQ_SHIFT
+			| 0x00000000U << DDRC_ZQCTL0_DIS_SRX_ZQCL_SHIFT
+			| 0x00000000U << DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_SHIFT
+			| 0x00000000U << DDRC_ZQCTL0_DIS_MPSMX_ZQCL_SHIFT
+			| 0x00000100U << DDRC_ZQCTL0_T_ZQ_LONG_NOP_SHIFT
+			| 0x00000040U << DDRC_ZQCTL0_T_ZQ_SHORT_NOP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ZQCTL0_OFFSET ,0xF7FF03FFU ,0x81000040U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQCTL1 @ 0XFD070184

+
+		tZQReset: Number of cycles of NOP required after a ZQReset (ZQ calibration Reset) command is issued to SDRAM. For configurati
+		ns with MEMC_FREQ_RATIO=2, program this to tZQReset/2 and round it up to the next integer value. Unit: Clock cycles. This is 
+		nly present for designs supporting LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL1_T_ZQ_RESET_NOP                                                  0x20
+
+		Average interval to wait between automatically issuing ZQCS (ZQ calibration short)/MPC(ZQ calibration) commands to DDR3/DDR4/
+		PDDR2/LPDDR3/LPDDR4 devices. Meaningless, if ZQCTL0.dis_auto_zq=1. Unit: 1024 clock cycles. This is only present for designs 
+		upporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
+		PSU_DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024                                       0x19707
+
+		ZQ Control Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070184, 0x3FFFFFFFU ,0x02019707U)  
+		RegMask = (DDRC_ZQCTL1_T_ZQ_RESET_NOP_MASK | DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_MASK |  0 );
+
+		RegVal = ((0x00000020U << DDRC_ZQCTL1_T_ZQ_RESET_NOP_SHIFT
+			| 0x00019707U << DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ZQCTL1_OFFSET ,0x3FFFFFFFU ,0x02019707U);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG0 @ 0XFD070190

+
+		Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
+		PSU_DDRC_DFITMG0_DFI_T_CTRL_DELAY                                               0x4
+
+		Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.
+		PSU_DDRC_DFITMG0_DFI_RDDATA_USE_SDR                                             0x1
+
+		Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks
+		PSU_DDRC_DFITMG0_DFI_T_RDDATA_EN                                                0xb
+
+		Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.
+		PSU_DDRC_DFITMG0_DFI_WRDATA_USE_SDR                                             0x1
+
+		Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks
+		PSU_DDRC_DFITMG0_DFI_TPHY_WRDATA                                                0x2
+
+		Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.
+		PSU_DDRC_DFITMG0_DFI_TPHY_WRLAT                                                 0xb
+
+		DFI Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070190, 0x1FBFBF3FU ,0x048B820BU)  
+		RegMask = (DDRC_DFITMG0_DFI_T_CTRL_DELAY_MASK | DDRC_DFITMG0_DFI_RDDATA_USE_SDR_MASK | DDRC_DFITMG0_DFI_T_RDDATA_EN_MASK | DDRC_DFITMG0_DFI_WRDATA_USE_SDR_MASK | DDRC_DFITMG0_DFI_TPHY_WRDATA_MASK | DDRC_DFITMG0_DFI_TPHY_WRLAT_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDRC_DFITMG0_DFI_T_CTRL_DELAY_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_DFI_RDDATA_USE_SDR_SHIFT
+			| 0x0000000BU << DDRC_DFITMG0_DFI_T_RDDATA_EN_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_DFI_WRDATA_USE_SDR_SHIFT
+			| 0x00000002U << DDRC_DFITMG0_DFI_TPHY_WRDATA_SHIFT
+			| 0x0000000BU << DDRC_DFITMG0_DFI_TPHY_WRLAT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG0_OFFSET ,0x1FBFBF3FU ,0x048B820BU);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG1 @ 0XFD070194

+
+		Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated command is driven. 
+		his field is used for CAL mode, should be set to '0' or the value which matches the CAL mode register setting in the DRAM. If
+		the PHY can add the latency for CAL mode, this should be set to '0'. Valid Range: 0, 3, 4, 5, 6, and 8
+		PSU_DDRC_DFITMG1_DFI_T_CMD_LAT                                                  0x0
+
+		Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated dfi_parity_in signa
+		 is driven.
+		PSU_DDRC_DFITMG1_DFI_T_PARIN_LAT                                                0x0
+
+		Specifies the number of DFI clocks between when the dfi_wrdata_en signal is asserted and when the corresponding write data tr
+		nsfer is completed on the DRAM bus. This corresponds to the DFI timing parameter twrdata_delay. Refer to PHY specification fo
+		 correct value. For DFI 3.0 PHY, set to twrdata_delay, a new timing parameter introduced in DFI 3.0. For DFI 2.1 PHY, set to 
+		phy_wrdata + (delay of DFI write data to the DRAM). Value to be programmed is in terms of DFI clocks, not PHY clocks. In FREQ
+		RATIO=2, divide PHY's value by 2 and round up to next integer. If using DFITMG0.dfi_wrdata_use_sdr=1, add 1 to the value. Uni
+		: Clocks
+		PSU_DDRC_DFITMG1_DFI_T_WRDATA_DELAY                                             0x3
+
+		Specifies the number of DFI clock cycles from the assertion of the dfi_dram_clk_disable signal on the DFI until the clock to 
+		he DRAM memory devices, at the PHY-DRAM boundary, maintains a low value. If the DFI clock and the memory clock are not phase 
+		ligned, this timing parameter should be rounded up to the next integer value.
+		PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE                                         0x3
+
+		Specifies the number of DFI clock cycles from the de-assertion of the dfi_dram_clk_disable signal on the DFI until the first 
+		alid rising edge of the clock to the DRAM memory devices, at the PHY-DRAM boundary. If the DFI clock and the memory clock are
+		not phase aligned, this timing parameter should be rounded up to the next integer value.
+		PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE                                          0x4
+
+		DFI Timing Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070194, 0xF31F0F0FU ,0x00030304U)  
+		RegMask = (DDRC_DFITMG1_DFI_T_CMD_LAT_MASK | DDRC_DFITMG1_DFI_T_PARIN_LAT_MASK | DDRC_DFITMG1_DFI_T_WRDATA_DELAY_MASK | DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_MASK | DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DFITMG1_DFI_T_CMD_LAT_SHIFT
+			| 0x00000000U << DDRC_DFITMG1_DFI_T_PARIN_LAT_SHIFT
+			| 0x00000003U << DDRC_DFITMG1_DFI_T_WRDATA_DELAY_SHIFT
+			| 0x00000003U << DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_SHIFT
+			| 0x00000004U << DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG1_OFFSET ,0xF31F0F0FU ,0x00030304U);
+	/*############################################################################################################################ */
+
+		/*Register : DFILPCFG0 @ 0XFD070198

+
+		Setting for DFI's tlp_resp time. Same value is used for both Power Down, Self Refresh, Deep Power Down and Maximum Power Savi
+		g modes. DFI 2.1 specification onwards, recommends using a fixed value of 7 always.
+		PSU_DDRC_DFILPCFG0_DFI_TLP_RESP                                                 0x7
+
+		Value to drive on dfi_lp_wakeup signal when Deep Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16
+		cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7
+		- 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 
+		31072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting mDDR or LPDDR2/LPDDR3 device
+		.
+		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD                                            0x0
+
+		Enables DFI Low Power interface handshaking during Deep Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled This is only pres
+		nt for designs supporting mDDR or LPDDR2/LPDDR3 devices.
+		PSU_DDRC_DFILPCFG0_DFI_LP_EN_DPD                                                0x0
+
+		Value to drive on dfi_lp_wakeup signal when Self Refresh mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cy
+		les - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 
+		048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 131
+		72 cycles - 0xE - 262144 cycles - 0xF - Unlimited
+		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR                                             0x0
+
+		Enables DFI Low Power interface handshaking during Self Refresh Entry/Exit. - 0 - Disabled - 1 - Enabled
+		PSU_DDRC_DFILPCFG0_DFI_LP_EN_SR                                                 0x1
+
+		Value to drive on dfi_lp_wakeup signal when Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cycl
+		s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20
+		8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107
+		 cycles - 0xE - 262144 cycles - 0xF - Unlimited
+		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD                                             0x4
+
+		Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled
+		PSU_DDRC_DFILPCFG0_DFI_LP_EN_PD                                                 0x1
+
+		DFI Low Power Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070198, 0x0FF1F1F1U ,0x07000141U)  
+		RegMask = (DDRC_DFILPCFG0_DFI_TLP_RESP_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK | DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT
+			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_SHIFT
+			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT
+			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT
+			| 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT
+			| 0x00000004U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT
+			| 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFILPCFG0_OFFSET ,0x0FF1F1F1U ,0x07000141U);
+	/*############################################################################################################################ */
+
+		/*Register : DFILPCFG1 @ 0XFD07019C

+
+		Value to drive on dfi_lp_wakeup signal when Maximum Power Saving Mode is entered. Determines the DFI's tlp_wakeup time: - 0x0
+		- 16 cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles 
+		 0x7 - 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0
+		D - 131072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting DDR4 devices.
+		PSU_DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM                                           0x2
+
+		Enables DFI Low Power interface handshaking during Maximum Power Saving Mode Entry/Exit. - 0 - Disabled - 1 - Enabled This is
+		only present for designs supporting DDR4 devices.
+		PSU_DDRC_DFILPCFG1_DFI_LP_EN_MPSM                                               0x1
+
+		DFI Low Power Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD07019C, 0x000000F1U ,0x00000021U)  
+		RegMask = (DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_MASK | DDRC_DFILPCFG1_DFI_LP_EN_MPSM_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_SHIFT
+			| 0x00000001U << DDRC_DFILPCFG1_DFI_LP_EN_MPSM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFILPCFG1_OFFSET ,0x000000F1U ,0x00000021U);
+	/*############################################################################################################################ */
+
+		/*Register : DFIUPD1 @ 0XFD0701A4

+
+		This is the minimum amount of time between uMCTL2 initiated DFI update requests (which is executed whenever the uMCTL2 is idl
+		). Set this number higher to reduce the frequency of update requests, which can have a small impact on the latency of the fir
+		t read request when the uMCTL2 is idle. Unit: 1024 clocks
+		PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024                               0x41
+
+		This is the maximum amount of time between uMCTL2 initiated DFI update requests. This timer resets with each update request; 
+		hen the timer expires dfi_ctrlupd_req is sent and traffic is blocked until the dfi_ctrlupd_ackx is received. PHY can use this
+		idle time to recalibrate the delay lines to the DLLs. The DFI controller update is also used to reset PHY FIFO pointers in ca
+		e of data capture errors. Updates are required to maintain calibration over PVT, but frequent updates may impact performance.
+		Note: Value programmed for DFIUPD1.dfi_t_ctrlupd_interval_max_x1024 must be greater than DFIUPD1.dfi_t_ctrlupd_interval_min_x
+		024. Unit: 1024 clocks
+		PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024                               0xe2
+
+		DFI Update Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0701A4, 0x00FF00FFU ,0x004100E2U)  
+		RegMask = (DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_MASK | DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_MASK |  0 );
+
+		RegVal = ((0x00000041U << DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_SHIFT
+			| 0x000000E2U << DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFIUPD1_OFFSET ,0x00FF00FFU ,0x004100E2U);
+	/*############################################################################################################################ */
+
+		/*Register : DFIMISC @ 0XFD0701B0

+
+		Defines polarity of dfi_wrdata_cs and dfi_rddata_cs signals. - 0: Signals are active low - 1: Signals are active high
+		PSU_DDRC_DFIMISC_DFI_DATA_CS_POLARITY                                           0x0
+
+		DBI implemented in DDRC or PHY. - 0 - DDRC implements DBI functionality. - 1 - PHY implements DBI functionality. Present only
+		in designs configured to support DDR4 and LPDDR4.
+		PSU_DDRC_DFIMISC_PHY_DBI_MODE                                                   0x0
+
+		PHY initialization complete enable signal. When asserted the dfi_init_complete signal can be used to trigger SDRAM initialisa
+		ion
+		PSU_DDRC_DFIMISC_DFI_INIT_COMPLETE_EN                                           0x0
+
+		DFI Miscellaneous Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0701B0, 0x00000007U ,0x00000000U)  
+		RegMask = (DDRC_DFIMISC_DFI_DATA_CS_POLARITY_MASK | DDRC_DFIMISC_PHY_DBI_MODE_MASK | DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DFIMISC_DFI_DATA_CS_POLARITY_SHIFT
+			| 0x00000000U << DDRC_DFIMISC_PHY_DBI_MODE_SHIFT
+			| 0x00000000U << DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFIMISC_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG2 @ 0XFD0701B4

+
+		>Number of clocks between when a read command is sent on the DFI control interface and when the associated dfi_rddata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_rdcslat. Refer to PHY specification for correct value.
+		PSU_DDRC_DFITMG2_DFI_TPHY_RDCSLAT                                               0x9
+
+		Number of clocks between when a write command is sent on the DFI control interface and when the associated dfi_wrdata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_wrcslat. Refer to PHY specification for correct value.
+		PSU_DDRC_DFITMG2_DFI_TPHY_WRCSLAT                                               0x6
+
+		DFI Timing Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0701B4, 0x00003F3FU ,0x00000906U)  
+		RegMask = (DDRC_DFITMG2_DFI_TPHY_RDCSLAT_MASK | DDRC_DFITMG2_DFI_TPHY_WRCSLAT_MASK |  0 );
+
+		RegVal = ((0x00000009U << DDRC_DFITMG2_DFI_TPHY_RDCSLAT_SHIFT
+			| 0x00000006U << DDRC_DFITMG2_DFI_TPHY_WRCSLAT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG2_OFFSET ,0x00003F3FU ,0x00000906U);
+	/*############################################################################################################################ */
+
+		/*Register : DBICTL @ 0XFD0701C0

+
+		Read DBI enable signal in DDRC. - 0 - Read DBI is disabled. - 1 - Read DBI is enabled. This signal must be set the same value
+		as DRAM's mode register. - DDR4: MR5 bit A12. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[6]
+		PSU_DDRC_DBICTL_RD_DBI_EN                                                       0x0
+
+		Write DBI enable signal in DDRC. - 0 - Write DBI is disabled. - 1 - Write DBI is enabled. This signal must be set the same va
+		ue as DRAM's mode register. - DDR4: MR5 bit A11. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[7]
+		PSU_DDRC_DBICTL_WR_DBI_EN                                                       0x0
+
+		DM enable signal in DDRC. - 0 - DM is disabled. - 1 - DM is enabled. This signal must be set the same logical value as DRAM's
+		mode register. - DDR4: Set this to same value as MR5 bit A10. When x4 devices are used, this signal must be set to 0. - LPDDR
+		: Set this to inverted value of MR13[5] which is opposite polarity from this signal
+		PSU_DDRC_DBICTL_DM_EN                                                           0x1
+
+		DM/DBI Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0701C0, 0x00000007U ,0x00000001U)  
+		RegMask = (DDRC_DBICTL_RD_DBI_EN_MASK | DDRC_DBICTL_WR_DBI_EN_MASK | DDRC_DBICTL_DM_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DBICTL_RD_DBI_EN_SHIFT
+			| 0x00000000U << DDRC_DBICTL_WR_DBI_EN_SHIFT
+			| 0x00000001U << DDRC_DBICTL_DM_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DBICTL_OFFSET ,0x00000007U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP0 @ 0XFD070200

+
+		Selects the HIF address bit used as rank address bit 0. Valid Range: 0 to 27, and 31 Internal Base: 6 The selected HIF addres
+		 bit is determined by adding the internal base to the value of this field. If set to 31, rank address bit 0 is set to 0.
+		PSU_DDRC_ADDRMAP0_ADDRMAP_CS_BIT0                                               0x1f
+
+		Address Map Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070200, 0x0000001FU ,0x0000001FU)  
+		RegMask = (DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_MASK |  0 );
+
+		RegVal = ((0x0000001FU << DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP0_OFFSET ,0x0000001FU ,0x0000001FU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP1 @ 0XFD070204

+
+		Selects the HIF address bit used as bank address bit 2. Valid Range: 0 to 29 and 31 Internal Base: 4 The selected HIF address
+		bit is determined by adding the internal base to the value of this field. If set to 31, bank address bit 2 is set to 0.
+		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B2                                               0x1f
+
+		Selects the HIF address bits used as bank address bit 1. Valid Range: 0 to 30 Internal Base: 3 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B1                                               0xa
+
+		Selects the HIF address bits used as bank address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B0                                               0xa
+
+		Address Map Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070204, 0x001F1F1FU ,0x001F0A0AU)  
+		RegMask = (DDRC_ADDRMAP1_ADDRMAP_BANK_B2_MASK | DDRC_ADDRMAP1_ADDRMAP_BANK_B1_MASK | DDRC_ADDRMAP1_ADDRMAP_BANK_B0_MASK |  0 );
+
+		RegVal = ((0x0000001FU << DDRC_ADDRMAP1_ADDRMAP_BANK_B2_SHIFT
+			| 0x0000000AU << DDRC_ADDRMAP1_ADDRMAP_BANK_B1_SHIFT
+			| 0x0000000AU << DDRC_ADDRMAP1_ADDRMAP_BANK_B0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP1_OFFSET ,0x001F1F1FU ,0x001F0A0AU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP2 @ 0XFD070208

+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 5. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 6. - Quarter bus width mode: Selects the HIF address bit used as column address bit 7 . Vali
+		 Range: 0 to 7, and 15 Internal Base: 5 The selected HIF address bit is determined by adding the internal base to the value o
+		 this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B5                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 4. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 5. - Quarter bus width mode: Selects the HIF address bit used as column address bit 6. Valid
+		Range: 0 to 7, and 15 Internal Base: 4 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B4                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 3. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 4. - Quarter bus width mode: Selects the HIF address bit used as column address bit 5. Valid
+		Range: 0 to 7 Internal Base: 3 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=16, it is required to program this to 0, hence register does not exist i
+		 this case.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B3                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 2. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 3. - Quarter bus width mode: Selects the HIF address bit used as column address bit 4. Valid
+		Range: 0 to 7 Internal Base: 2 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=8 or 16, it is required to program this to 0.
+		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B2                                                0x0
+
+		Address Map Register 2
+		(OFFSET, MASK, VALUE)      (0XFD070208, 0x0F0F0F0FU ,0x00000000U)  
+		RegMask = (DDRC_ADDRMAP2_ADDRMAP_COL_B5_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B4_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B3_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B2_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B5_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B4_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B3_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP2_OFFSET ,0x0F0F0F0FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP3 @ 0XFD07020C

+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 9. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: Selects the HIF address bit used as
+		column address bit 13 (11 in LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 9 The selected HIF address bit i
+		 determined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: 
+		er JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source addr
+		ss bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus an
+		 hence column bit 10 is used.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B9                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 8. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 9. - Quarter bus width mode: Selects the HIF address bit used as column address bit 11 (10 i
+		 LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 8 The selected HIF address bit is determined by adding the i
+		ternal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specif
+		cation, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to col
+		mn address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is use
+		.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B8                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 7. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 8. - Quarter bus width mode: Selects the HIF address bit used as column address bit 9. Valid
+		Range: 0 to 7, and 15 Internal Base: 7 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B7                                                0x0
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 6. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 7. - Quarter bus width mode: Selects the HIF address bit used as column address bit 8. Valid
+		Range: 0 to 7, and 15 Internal Base: 6 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.
+		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B6                                                0x0
+
+		Address Map Register 3
+		(OFFSET, MASK, VALUE)      (0XFD07020C, 0x0F0F0F0FU ,0x00000000U)  
+		RegMask = (DDRC_ADDRMAP3_ADDRMAP_COL_B9_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B8_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B7_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B6_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B9_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B8_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B7_SHIFT
+			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B6_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP3_OFFSET ,0x0F0F0F0FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP4 @ 0XFD070210

+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Unused. To make it unused, this should be tied to 4'hF. - Quarter bus width mode: Unused. To make it unused, this must 
+		e tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 11 The selected HIF address bit is determined by adding the intern
+		l base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specificati
+		n, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to column a
+		dress bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is used.
+		PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B11                                               0xf
+
+		- Full bus width mode: Selects the HIF address bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: UNUSED.
+		To make it unused, this must be tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 10 The selected HIF address bit is d
+		termined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per
+		JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source address
+		bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and h
+		nce column bit 10 is used.
+		PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B10                                               0xf
+
+		Address Map Register 4
+		(OFFSET, MASK, VALUE)      (0XFD070210, 0x00000F0FU ,0x00000F0FU)  
+		RegMask = (DDRC_ADDRMAP4_ADDRMAP_COL_B11_MASK | DDRC_ADDRMAP4_ADDRMAP_COL_B10_MASK |  0 );
+
+		RegVal = ((0x0000000FU << DDRC_ADDRMAP4_ADDRMAP_COL_B11_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP4_ADDRMAP_COL_B10_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP4_OFFSET ,0x00000F0FU ,0x00000F0FU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP5 @ 0XFD070214

+
+		Selects the HIF address bit used as row address bit 11. Valid Range: 0 to 11, and 15 Internal Base: 17 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 11 is set to 0.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B11                                               0x8
+
+		Selects the HIF address bits used as row address bits 2 to 10. Valid Range: 0 to 11, and 15 Internal Base: 8 (for row address
+		bit 2), 9 (for row address bit 3), 10 (for row address bit 4) etc increasing to 16 (for row address bit 10) The selected HIF 
+		ddress bit for each of the row address bits is determined by adding the internal base to the value of this field. When value 
+		5 is used the values of row address bits 2 to 10 are defined by registers ADDRMAP9, ADDRMAP10, ADDRMAP11.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10                                             0xf
+
+		Selects the HIF address bits used as row address bit 1. Valid Range: 0 to 11 Internal Base: 7 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B1                                                0x8
+
+		Selects the HIF address bits used as row address bit 0. Valid Range: 0 to 11 Internal Base: 6 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B0                                                0x8
+
+		Address Map Register 5
+		(OFFSET, MASK, VALUE)      (0XFD070214, 0x0F0F0F0FU ,0x080F0808U)  
+		RegMask = (DDRC_ADDRMAP5_ADDRMAP_ROW_B11_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B1_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B0_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B11_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B1_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP5_OFFSET ,0x0F0F0F0FU ,0x080F0808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP6 @ 0XFD070218

+
+		Set this to 1 if there is an LPDDR3 SDRAM 6Gb or 12Gb device in use. - 1 - LPDDR3 SDRAM 6Gb/12Gb device in use. Every address
+		having row[14:13]==2'b11 is considered as invalid - 0 - non-LPDDR3 6Gb/12Gb device in use. All addresses are valid Present on
+		y in designs configured to support LPDDR3.
+		PSU_DDRC_ADDRMAP6_LPDDR3_6GB_12GB                                               0x0
+
+		Selects the HIF address bit used as row address bit 15. Valid Range: 0 to 11, and 15 Internal Base: 21 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 15 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B15                                               0xf
+
+		Selects the HIF address bit used as row address bit 14. Valid Range: 0 to 11, and 15 Internal Base: 20 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 14 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B14                                               0x8
+
+		Selects the HIF address bit used as row address bit 13. Valid Range: 0 to 11, and 15 Internal Base: 19 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 13 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B13                                               0x8
+
+		Selects the HIF address bit used as row address bit 12. Valid Range: 0 to 11, and 15 Internal Base: 18 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 12 is set to 0.
+		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B12                                               0x8
+
+		Address Map Register 6
+		(OFFSET, MASK, VALUE)      (0XFD070218, 0x8F0F0F0FU ,0x0F080808U)  
+		RegMask = (DDRC_ADDRMAP6_LPDDR3_6GB_12GB_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B15_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B14_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B13_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B12_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ADDRMAP6_LPDDR3_6GB_12GB_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP6_ADDRMAP_ROW_B15_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B14_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B13_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B12_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP6_OFFSET ,0x8F0F0F0FU ,0x0F080808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP7 @ 0XFD07021C

+
+		Selects the HIF address bit used as row address bit 17. Valid Range: 0 to 10, and 15 Internal Base: 23 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 17 is set to 0.
+		PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B17                                               0xf
+
+		Selects the HIF address bit used as row address bit 16. Valid Range: 0 to 11, and 15 Internal Base: 22 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 16 is set to 0.
+		PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B16                                               0xf
+
+		Address Map Register 7
+		(OFFSET, MASK, VALUE)      (0XFD07021C, 0x00000F0FU ,0x00000F0FU)  
+		RegMask = (DDRC_ADDRMAP7_ADDRMAP_ROW_B17_MASK | DDRC_ADDRMAP7_ADDRMAP_ROW_B16_MASK |  0 );
+
+		RegVal = ((0x0000000FU << DDRC_ADDRMAP7_ADDRMAP_ROW_B17_SHIFT
+			| 0x0000000FU << DDRC_ADDRMAP7_ADDRMAP_ROW_B16_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP7_OFFSET ,0x00000F0FU ,0x00000F0FU);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP8 @ 0XFD070220

+
+		Selects the HIF address bits used as bank group address bit 1. Valid Range: 0 to 30, and 31 Internal Base: 3 The selected HIF
+		address bit for each of the bank group address bits is determined by adding the internal base to the value of this field. If 
+		et to 31, bank group address bit 1 is set to 0.
+		PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B1                                                 0x8
+
+		Selects the HIF address bits used as bank group address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address
+		bit for each of the bank group address bits is determined by adding the internal base to the value of this field.
+		PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B0                                                 0x8
+
+		Address Map Register 8
+		(OFFSET, MASK, VALUE)      (0XFD070220, 0x00001F1FU ,0x00000808U)  
+		RegMask = (DDRC_ADDRMAP8_ADDRMAP_BG_B1_MASK | DDRC_ADDRMAP8_ADDRMAP_BG_B0_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP8_ADDRMAP_BG_B1_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP8_ADDRMAP_BG_B0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP8_OFFSET ,0x00001F1FU ,0x00000808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP9 @ 0XFD070224

+
+		Selects the HIF address bits used as row address bit 5. Valid Range: 0 to 11 Internal Base: 11 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B5                                                0x8
+
+		Selects the HIF address bits used as row address bit 4. Valid Range: 0 to 11 Internal Base: 10 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B4                                                0x8
+
+		Selects the HIF address bits used as row address bit 3. Valid Range: 0 to 11 Internal Base: 9 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B3                                                0x8
+
+		Selects the HIF address bits used as row address bit 2. Valid Range: 0 to 11 Internal Base: 8 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B2                                                0x8
+
+		Address Map Register 9
+		(OFFSET, MASK, VALUE)      (0XFD070224, 0x0F0F0F0FU ,0x08080808U)  
+		RegMask = (DDRC_ADDRMAP9_ADDRMAP_ROW_B5_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B4_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B3_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B2_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B5_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B4_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B3_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP9_OFFSET ,0x0F0F0F0FU ,0x08080808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP10 @ 0XFD070228

+
+		Selects the HIF address bits used as row address bit 9. Valid Range: 0 to 11 Internal Base: 15 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B9                                               0x8
+
+		Selects the HIF address bits used as row address bit 8. Valid Range: 0 to 11 Internal Base: 14 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B8                                               0x8
+
+		Selects the HIF address bits used as row address bit 7. Valid Range: 0 to 11 Internal Base: 13 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B7                                               0x8
+
+		Selects the HIF address bits used as row address bit 6. Valid Range: 0 to 11 Internal Base: 12 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B6                                               0x8
+
+		Address Map Register 10
+		(OFFSET, MASK, VALUE)      (0XFD070228, 0x0F0F0F0FU ,0x08080808U)  
+		RegMask = (DDRC_ADDRMAP10_ADDRMAP_ROW_B9_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B8_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B7_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B6_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B9_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B8_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B7_SHIFT
+			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B6_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP10_OFFSET ,0x0F0F0F0FU ,0x08080808U);
+	/*############################################################################################################################ */
+
+		/*Register : ADDRMAP11 @ 0XFD07022C

+
+		Selects the HIF address bits used as row address bit 10. Valid Range: 0 to 11 Internal Base: 16 The selected HIF address bit 
+		or each of the row address bits is determined by adding the internal base to the value of this field. This register field is 
+		sed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
+		PSU_DDRC_ADDRMAP11_ADDRMAP_ROW_B10                                              0x8
+
+		Address Map Register 11
+		(OFFSET, MASK, VALUE)      (0XFD07022C, 0x0000000FU ,0x00000008U)  
+		RegMask = (DDRC_ADDRMAP11_ADDRMAP_ROW_B10_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_ADDRMAP11_ADDRMAP_ROW_B10_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ADDRMAP11_OFFSET ,0x0000000FU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : ODTCFG @ 0XFD070240

+
+		Cycles to hold ODT for a write command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x5 (DDR2-400/533/
+		67), 0x6 (DDR2-800), 0x7 (DDR2-1066) - BL4: 0x3 (DDR2-400/533/667), 0x4 (DDR2-800), 0x5 (DDR2-1066) DDR3: - BL8: 0x6 DDR4: - 
+		L8: 5 + WR_PREAMBLE + CRC_MODE WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) CRC_MODE = 0 (not CRC mode), 1 
+		CRC mode) LPDDR3: - BL8: 7 + RU(tODTon(max)/tCK)
+		PSU_DDRC_ODTCFG_WR_ODT_HOLD                                                     0x6
+
+		The delay, in clock cycles, from issuing a write command to setting ODT values associated with that command. ODT setting must
+		remain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CWL + AL - 3 (DDR2-400/533/
+		67), CWL + AL - 4 (DDR2-800), CWL + AL - 5 (DDR2-1066) If (CWL + AL - 3 < 0), uMCTL2 does not support ODT for write operation
+		 DDR3: - 0x0 DDR4: - DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) LPDDR3: - WL - 1 - RU(tODTon(max)/tCK))
+		PSU_DDRC_ODTCFG_WR_ODT_DELAY                                                    0x0
+
+		Cycles to hold ODT for a read command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x6 (not DDR2-1066)
+		 0x7 (DDR2-1066) - BL4: 0x4 (not DDR2-1066), 0x5 (DDR2-1066) DDR3: - BL8 - 0x6 DDR4: - BL8: 5 + RD_PREAMBLE RD_PREAMBLE = 1 (
+		tCK write preamble), 2 (2tCK write preamble) LPDDR3: - BL8: 5 + RU(tDQSCK(max)/tCK) - RD(tDQSCK(min)/tCK) + RU(tODTon(max)/tC
+		)
+		PSU_DDRC_ODTCFG_RD_ODT_HOLD                                                     0x6
+
+		The delay, in clock cycles, from issuing a read command to setting ODT values associated with that command. ODT setting must 
+		emain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CL + AL - 4 (not DDR2-1066),
+		CL + AL - 5 (DDR2-1066) If (CL + AL - 4 < 0), uMCTL2 does not support ODT for read operation. DDR3: - CL - CWL DDR4: - CL - C
+		L - RD_PREAMBLE + WR_PREAMBLE + DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK
+		write preamble) RD_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) If (CL - CWL - RD_PREAMBLE + WR_PREAMBLE) < 0,
+		uMCTL2 does not support ODT for read operation. LPDDR3: - RL + RD(tDQSCK(min)/tCK) - 1 - RU(tODTon(max)/tCK)
+		PSU_DDRC_ODTCFG_RD_ODT_DELAY                                                    0x0
+
+		ODT Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD070240, 0x0F1F0F7CU ,0x06000600U)  
+		RegMask = (DDRC_ODTCFG_WR_ODT_HOLD_MASK | DDRC_ODTCFG_WR_ODT_DELAY_MASK | DDRC_ODTCFG_RD_ODT_HOLD_MASK | DDRC_ODTCFG_RD_ODT_DELAY_MASK |  0 );
+
+		RegVal = ((0x00000006U << DDRC_ODTCFG_WR_ODT_HOLD_SHIFT
+			| 0x00000000U << DDRC_ODTCFG_WR_ODT_DELAY_SHIFT
+			| 0x00000006U << DDRC_ODTCFG_RD_ODT_HOLD_SHIFT
+			| 0x00000000U << DDRC_ODTCFG_RD_ODT_DELAY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ODTCFG_OFFSET ,0x0F1F0F7CU ,0x06000600U);
+	/*############################################################################################################################ */
+
+		/*Register : ODTMAP @ 0XFD070244

+
+		Indicates which remote ODTs must be turned on during a read from rank 1. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
+		PSU_DDRC_ODTMAP_RANK1_RD_ODT                                                    0x0
+
+		Indicates which remote ODTs must be turned on during a write to rank 1. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
+		PSU_DDRC_ODTMAP_RANK1_WR_ODT                                                    0x0
+
+		Indicates which remote ODTs must be turned on during a read from rank 0. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT.
+		PSU_DDRC_ODTMAP_RANK0_RD_ODT                                                    0x0
+
+		Indicates which remote ODTs must be turned on during a write to rank 0. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT.
+		PSU_DDRC_ODTMAP_RANK0_WR_ODT                                                    0x1
+
+		ODT/Rank Map Register
+		(OFFSET, MASK, VALUE)      (0XFD070244, 0x00003333U ,0x00000001U)  
+		RegMask = (DDRC_ODTMAP_RANK1_RD_ODT_MASK | DDRC_ODTMAP_RANK1_WR_ODT_MASK | DDRC_ODTMAP_RANK0_RD_ODT_MASK | DDRC_ODTMAP_RANK0_WR_ODT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_ODTMAP_RANK1_RD_ODT_SHIFT
+			| 0x00000000U << DDRC_ODTMAP_RANK1_WR_ODT_SHIFT
+			| 0x00000000U << DDRC_ODTMAP_RANK0_RD_ODT_SHIFT
+			| 0x00000001U << DDRC_ODTMAP_RANK0_WR_ODT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_ODTMAP_OFFSET ,0x00003333U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : SCHED @ 0XFD070250

+
+		When the preferred transaction store is empty for these many clock cycles, switch to the alternate transaction store if it is
+		non-empty. The read transaction store (both high and low priority) is the default preferred transaction store and the write t
+		ansaction store is the alternative store. When prefer write over read is set this is reversed. 0x0 is a legal value for this 
+		egister. When set to 0x0, the transaction store switching will happen immediately when the switching conditions become true. 
+		OR PERFORMANCE ONLY
+		PSU_DDRC_SCHED_RDWR_IDLE_GAP                                                    0x1
+
+		UNUSED
+		PSU_DDRC_SCHED_GO2CRITICAL_HYSTERESIS                                           0x0
+
+		Number of entries in the low priority transaction store is this value + 1. (MEMC_NO_OF_ENTRY - (SCHED.lpr_num_entries + 1)) i
+		 the number of entries available for the high priority transaction store. Setting this to maximum value allocates all entries
+		to low priority transaction store. Setting this to 0 allocates 1 entry to low priority transaction store and the rest to high
+		priority transaction store. Note: In ECC configurations, the numbers of write and low priority read credits issued is one les
+		 than in the non-ECC case. One entry each is reserved in the write and low-priority read CAMs for storing the RMW requests ar
+		sing out of single bit error correction RMW operation.
+		PSU_DDRC_SCHED_LPR_NUM_ENTRIES                                                  0x20
+
+		If true, bank is kept open only while there are page hit transactions available in the CAM to that bank. The last read or wri
+		e command in the CAM with a bank and page hit will be executed with auto-precharge if SCHED1.pageclose_timer=0. Even if this 
+		egister set to 1 and SCHED1.pageclose_timer is set to 0, explicit precharge (and not auto-precharge) may be issued in some ca
+		es where there is a mode switch between Write and Read or between LPR and HPR. The Read and Write commands that are executed 
+		s part of the ECC scrub requests are also executed without auto-precharge. If false, the bank remains open until there is a n
+		ed to close it (to open a different page, or for page timeout or refresh timeout) - also known as open page policy. The open 
+		age policy can be overridden by setting the per-command-autopre bit on the HIF interface (hif_cmd_autopre). The pageclose fea
+		ure provids a midway between Open and Close page policies. FOR PERFORMANCE ONLY.
+		PSU_DDRC_SCHED_PAGECLOSE                                                        0x0
+
+		If set then the bank selector prefers writes over reads. FOR DEBUG ONLY.
+		PSU_DDRC_SCHED_PREFER_WRITE                                                     0x0
+
+		Active low signal. When asserted ('0'), all incoming transactions are forced to low priority. This implies that all High Prio
+		ity Read (HPR) and Variable Priority Read commands (VPR) will be treated as Low Priority Read (LPR) commands. On the write si
+		e, all Variable Priority Write (VPW) commands will be treated as Normal Priority Write (NPW) commands. Forcing the incoming t
+		ansactions to low priority implicitly turns off Bypass path for read commands. FOR PERFORMANCE ONLY.
+		PSU_DDRC_SCHED_FORCE_LOW_PRI_N                                                  0x1
+
+		Scheduler Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070250, 0x7FFF3F07U ,0x01002001U)  
+		RegMask = (DDRC_SCHED_RDWR_IDLE_GAP_MASK | DDRC_SCHED_GO2CRITICAL_HYSTERESIS_MASK | DDRC_SCHED_LPR_NUM_ENTRIES_MASK | DDRC_SCHED_PAGECLOSE_MASK | DDRC_SCHED_PREFER_WRITE_MASK | DDRC_SCHED_FORCE_LOW_PRI_N_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_SCHED_RDWR_IDLE_GAP_SHIFT
+			| 0x00000000U << DDRC_SCHED_GO2CRITICAL_HYSTERESIS_SHIFT
+			| 0x00000020U << DDRC_SCHED_LPR_NUM_ENTRIES_SHIFT
+			| 0x00000000U << DDRC_SCHED_PAGECLOSE_SHIFT
+			| 0x00000000U << DDRC_SCHED_PREFER_WRITE_SHIFT
+			| 0x00000001U << DDRC_SCHED_FORCE_LOW_PRI_N_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SCHED_OFFSET ,0x7FFF3F07U ,0x01002001U);
+	/*############################################################################################################################ */
+
+		/*Register : PERFLPR1 @ 0XFD070264

+
+		Number of transactions that are serviced once the LPR queue goes critical is the smaller of: - (a) This number - (b) Number o
+		 transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH                                           0x8
+
+		Number of clocks that the LPR queue can be starved before it goes critical. The minimum valid functional value for this regis
+		er is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not
+		be disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFLPR1_LPR_MAX_STARVE                                                0x40
+
+		Low Priority Read CAM Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070264, 0xFF00FFFFU ,0x08000040U)  
+		RegMask = (DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_MASK | DDRC_PERFLPR1_LPR_MAX_STARVE_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_SHIFT
+			| 0x00000040U << DDRC_PERFLPR1_LPR_MAX_STARVE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PERFLPR1_OFFSET ,0xFF00FFFFU ,0x08000040U);
+	/*############################################################################################################################ */
+
+		/*Register : PERFWR1 @ 0XFD07026C

+
+		Number of transactions that are serviced once the WR queue goes critical is the smaller of: - (a) This number - (b) Number of
+		transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFWR1_W_XACT_RUN_LENGTH                                              0x8
+
+		Number of clocks that the WR queue can be starved before it goes critical. The minimum valid functional value for this regist
+		r is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not 
+		e disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
+		PSU_DDRC_PERFWR1_W_MAX_STARVE                                                   0x40
+
+		Write CAM Register 1
+		(OFFSET, MASK, VALUE)      (0XFD07026C, 0xFF00FFFFU ,0x08000040U)  
+		RegMask = (DDRC_PERFWR1_W_XACT_RUN_LENGTH_MASK | DDRC_PERFWR1_W_MAX_STARVE_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDRC_PERFWR1_W_XACT_RUN_LENGTH_SHIFT
+			| 0x00000040U << DDRC_PERFWR1_W_MAX_STARVE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PERFWR1_OFFSET ,0xFF00FFFFU ,0x08000040U);
+	/*############################################################################################################################ */
+
+		/*Register : DQMAP5 @ 0XFD070294

+
+		All even ranks have the same DQ mapping controled by DQMAP0-4 register as rank 0. This register provides DQ swap function for
+		all odd ranks to support CRC feature. rank based DQ swapping is: swap bit 0 with 1, swap bit 2 with 3, swap bit 4 with 5 and 
+		wap bit 6 with 7. 1: Disable rank based DQ swapping 0: Enable rank based DQ swapping Present only in designs configured to su
+		port DDR4.
+		PSU_DDRC_DQMAP5_DIS_DQ_RANK_SWAP                                                0x1
+
+		DQ Map Register 5
+		(OFFSET, MASK, VALUE)      (0XFD070294, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_DQMAP5_DIS_DQ_RANK_SWAP_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_DQMAP5_DIS_DQ_RANK_SWAP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DQMAP5_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : DBG0 @ 0XFD070300

+
+		When this is set to '0', auto-precharge is disabled for the flushed command in a collision case. Collision cases are write fo
+		lowed by read to same address, read followed by write to same address, or write followed by write to same address with DBG0.d
+		s_wc bit = 1 (where same address comparisons exclude the two address bits representing critical word). FOR DEBUG ONLY.
+		PSU_DDRC_DBG0_DIS_COLLISION_PAGE_OPT                                            0x0
+
+		When 1, disable write combine. FOR DEBUG ONLY
+		PSU_DDRC_DBG0_DIS_WC                                                            0x0
+
+		Debug Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070300, 0x00000011U ,0x00000000U)  
+		RegMask = (DDRC_DBG0_DIS_COLLISION_PAGE_OPT_MASK | DDRC_DBG0_DIS_WC_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DBG0_DIS_COLLISION_PAGE_OPT_SHIFT
+			| 0x00000000U << DDRC_DBG0_DIS_WC_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DBG0_OFFSET ,0x00000011U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DBGCMD @ 0XFD07030C

+
+		Setting this register bit to 1 allows refresh and ZQCS commands to be triggered from hardware via the IOs ext_*. If set to 1,
+		the fields DBGCMD.zq_calib_short and DBGCMD.rank*_refresh have no function, and are ignored by the uMCTL2 logic. Setting this
+		register bit to 0 allows refresh and ZQCS to be triggered from software, via the fields DBGCMD.zq_calib_short and DBGCMD.rank
+		_refresh. If set to 0, the hardware pins ext_* have no function, and are ignored by the uMCTL2 logic. This register is static
+		 and may only be changed when the DDRC reset signal, core_ddrc_rstn, is asserted (0).
+		PSU_DDRC_DBGCMD_HW_REF_ZQ_EN                                                    0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a dfi_ctrlupd_req to the PHY. When this request is stored in 
+		he uMCTL2, the bit is automatically cleared. This operation must only be performed when DFIUPD0.dis_auto_ctrlupd=1.
+		PSU_DDRC_DBGCMD_CTRLUPD                                                         0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a ZQCS (ZQ calibration short)/MPC(ZQ calibration) command to 
+		he SDRAM. When this request is stored in the uMCTL2, the bit is automatically cleared. This operation can be performed only w
+		en ZQCTL0.dis_auto_zq=1. It is recommended NOT to set this register bit if in Init operating mode. This register bit is ignor
+		d when in Self-Refresh(except LPDDR4) and SR-Powerdown(LPDDR4) and Deep power-down operating modes and Maximum Power Saving M
+		de.
+		PSU_DDRC_DBGCMD_ZQ_CALIB_SHORT                                                  0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 1. Writing to this bit causes DBGSTAT.rank1
+		refresh_busy to be set. When DBGSTAT.rank1_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.
+		PSU_DDRC_DBGCMD_RANK1_REFRESH                                                   0x0
+
+		Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 0. Writing to this bit causes DBGSTAT.rank0
+		refresh_busy to be set. When DBGSTAT.rank0_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.
+		PSU_DDRC_DBGCMD_RANK0_REFRESH                                                   0x0
+
+		Command Debug Register
+		(OFFSET, MASK, VALUE)      (0XFD07030C, 0x80000033U ,0x00000000U)  
+		RegMask = (DDRC_DBGCMD_HW_REF_ZQ_EN_MASK | DDRC_DBGCMD_CTRLUPD_MASK | DDRC_DBGCMD_ZQ_CALIB_SHORT_MASK | DDRC_DBGCMD_RANK1_REFRESH_MASK | DDRC_DBGCMD_RANK0_REFRESH_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_DBGCMD_HW_REF_ZQ_EN_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_CTRLUPD_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_ZQ_CALIB_SHORT_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_RANK1_REFRESH_SHIFT
+			| 0x00000000U << DDRC_DBGCMD_RANK0_REFRESH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DBGCMD_OFFSET ,0x80000033U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SWCTL @ 0XFD070320

+
+		Enable quasi-dynamic register programming outside reset. Program register to 0 to enable quasi-dynamic programming. Set back 
+		egister to 1 once programming is done.
+		PSU_DDRC_SWCTL_SW_DONE                                                          0x0
+
+		Software register programming control enable
+		(OFFSET, MASK, VALUE)      (0XFD070320, 0x00000001U ,0x00000000U)  
+		RegMask = (DDRC_SWCTL_SW_DONE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_SWCTL_SW_DONE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SWCTL_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCCFG @ 0XFD070400

+
+		Burst length expansion mode. By default (i.e. bl_exp_mode==0) XPI expands every AXI burst into multiple HIF commands, using t
+		e memory burst length as a unit. If set to 1, then XPI will use half of the memory burst length as a unit. This applies to bo
+		h reads and writes. When MSTR.data_bus_width==00, setting bl_exp_mode to 1 has no effect. This can be used in cases where Par
+		ial Writes is enabled (UMCTL2_PARTIAL_WR=1) and DBG0.dis_wc=1, in order to avoid or minimize t_ccd_l penalty in DDR4 and t_cc
+		_mw penalty in LPDDR4. Note that if DBICTL.reg_ddrc_dm_en=0, functionality is not supported in the following cases: - UMCTL2_
+		ARTIAL_WR=0 - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=8 and MSTR.reg_ddrc_burst_rdwr=1000 (LP
+		DR4 only) - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=4 and MSTR.reg_ddrc_burst_rdwr=0100 (DDR4
+		only), with either MSTR.reg_ddrc_burstchop=0 or CRCPARCTL1.reg_ddrc_crc_enable=1 Functionality is also not supported if Share
+		-AC is enabled
+		PSU_DDRC_PCCFG_BL_EXP_MODE                                                      0x0
+
+		Page match four limit. If set to 1, limits the number of consecutive same page DDRC transactions that can be granted by the P
+		rt Arbiter to four when Page Match feature is enabled. If set to 0, there is no limit imposed on number of consecutive same p
+		ge DDRC transactions.
+		PSU_DDRC_PCCFG_PAGEMATCH_LIMIT                                                  0x0
+
+		If set to 1 (enabled), sets co_gs_go2critical_wr and co_gs_go2critical_lpr/co_gs_go2critical_hpr signals going to DDRC based 
+		n urgent input (awurgent, arurgent) coming from AXI master. If set to 0 (disabled), co_gs_go2critical_wr and co_gs_go2critica
+		_lpr/co_gs_go2critical_hpr signals at DDRC are driven to 1b'0.
+		PSU_DDRC_PCCFG_GO2CRITICAL_EN                                                   0x1
+
+		Port Common Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD070400, 0x00000111U ,0x00000001U)  
+		RegMask = (DDRC_PCCFG_BL_EXP_MODE_MASK | DDRC_PCCFG_PAGEMATCH_LIMIT_MASK | DDRC_PCCFG_GO2CRITICAL_EN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCCFG_BL_EXP_MODE_SHIFT
+			| 0x00000000U << DDRC_PCCFG_PAGEMATCH_LIMIT_SHIFT
+			| 0x00000001U << DDRC_PCCFG_GO2CRITICAL_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCCFG_OFFSET ,0x00000111U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_0 @ 0XFD070404

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_0_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_0_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_0_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070404, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_0_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_0_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_0_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_0_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_0_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_0_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_0_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_0 @ 0XFD070408

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_0_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_0_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_0_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070408, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_0_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_0_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_0_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_0_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_0_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_0_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_0_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_0 @ 0XFD070490

+
+		Enables port n.
+		PSU_DDRC_PCTRL_0_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070490, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_0_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_0_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_0_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_0 @ 0XFD070494

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION1                                            0x2
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1                                             0xb
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070494, 0x0033000FU ,0x0020000BU)  
+		RegMask = (DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_SHIFT
+			| 0x0000000BU << DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_0_OFFSET ,0x0033000FU ,0x0020000BU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_0 @ 0XFD070498

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB                                           0x0
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070498, 0x07FF07FFU ,0x00000000U)  
+		RegMask = (DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_0_OFFSET ,0x07FF07FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_1 @ 0XFD0704B4

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_1_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_1_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_1_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD0704B4, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_1_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_1_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_1_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_1_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_1_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_1_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_1_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_1 @ 0XFD0704B8

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_1_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_1_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_1_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD0704B8, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_1_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_1_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_1_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_1_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_1_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_1_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_1_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_1 @ 0XFD070540

+
+		Enables port n.
+		PSU_DDRC_PCTRL_1_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070540, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_1_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_1_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_1_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_1 @ 0XFD070544

+
+		This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION2                                            0x2
+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION1                                            0x0
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION0                                            0x0
+
+		Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2                                             0xb
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070544, 0x03330F0FU ,0x02000B03U)  
+		RegMask = (DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_SHIFT
+			| 0x0000000BU << DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_1_OFFSET ,0x03330F0FU ,0x02000B03U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_1 @ 0XFD070548

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB                                           0x0
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070548, 0x07FF07FFU ,0x00000000U)  
+		RegMask = (DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_1_OFFSET ,0x07FF07FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_2 @ 0XFD070564

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_2_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_2_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_2_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070564, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_2_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_2_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_2_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_2_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_2_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_2_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_2_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_2 @ 0XFD070568

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_2_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_2_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_2_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070568, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_2_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_2_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_2_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_2_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_2_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_2_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_2_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_2 @ 0XFD0705F0

+
+		Enables port n.
+		PSU_DDRC_PCTRL_2_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0705F0, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_2_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_2_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_2_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_2 @ 0XFD0705F4

+
+		This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION2                                            0x2
+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION1                                            0x0
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION0                                            0x0
+
+		Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2                                             0xb
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0705F4, 0x03330F0FU ,0x02000B03U)  
+		RegMask = (DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_SHIFT
+			| 0x0000000BU << DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_2_OFFSET ,0x03330F0FU ,0x02000B03U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_2 @ 0XFD0705F8

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB                                           0x0
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0705F8, 0x07FF07FFU ,0x00000000U)  
+		RegMask = (DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_2_OFFSET ,0x07FF07FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_3 @ 0XFD070614

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_3_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_3_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_3_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070614, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_3_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_3_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_3_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_3_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_3_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_3_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_3_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_3 @ 0XFD070618

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_3_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_3_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_3_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070618, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_3_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_3_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_3_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_3_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_3_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_3_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_3_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_3 @ 0XFD0706A0

+
+		Enables port n.
+		PSU_DDRC_PCTRL_3_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0706A0, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_3_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_3_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_3_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_3 @ 0XFD0706A4

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION1                                            0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0706A4, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_3_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_3 @ 0XFD0706A8

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0706A8, 0x07FF07FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x0000004FU << DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_3_OFFSET ,0x07FF07FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS0_3 @ 0XFD0706AC

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1                                           0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0                                           0x0
+
+		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.
+		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL                                             0x3
+
+		Port n Write QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0706AC, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS0_3_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS1_3 @ 0XFD0706B0

+
+		Specifies the timeout value for write transactions.
+		PSU_DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT                                           0x4f
+
+		Port n Write QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD0706B0, 0x000007FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS1_3_OFFSET ,0x000007FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_4 @ 0XFD0706C4

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_4_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_4_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_4_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD0706C4, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_4_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_4_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_4_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_4_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_4_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_4_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_4_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_4 @ 0XFD0706C8

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_4_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_4_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_4_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD0706C8, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_4_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_4_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_4_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_4_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_4_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_4_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_4_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_4 @ 0XFD070750

+
+		Enables port n.
+		PSU_DDRC_PCTRL_4_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070750, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_4_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_4_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_4_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_4 @ 0XFD070754

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION1                                            0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070754, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_4_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_4 @ 0XFD070758

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070758, 0x07FF07FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x0000004FU << DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_4_OFFSET ,0x07FF07FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS0_4 @ 0XFD07075C

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1                                           0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0                                           0x0
+
+		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.
+		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL                                             0x3
+
+		Port n Write QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD07075C, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS0_4_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS1_4 @ 0XFD070760

+
+		Specifies the timeout value for write transactions.
+		PSU_DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT                                           0x4f
+
+		Port n Write QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070760, 0x000007FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS1_4_OFFSET ,0x000007FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGR_5 @ 0XFD070774

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN                                           0x0
+
+		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).
+		PSU_DDRC_PCFGR_5_RD_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the read channel of the port.
+		PSU_DDRC_PCFGR_5_RD_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGR_5_RD_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Read Register
+		(OFFSET, MASK, VALUE)      (0XFD070774, 0x000073FFU ,0x0000200FU)  
+		RegMask = (DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_5_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_5_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_5_RD_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGR_5_RD_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGR_5_RD_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGR_5_RD_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGR_5_OFFSET ,0x000073FFU ,0x0000200FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGW_5 @ 0XFD070778

+
+		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.
+		PSU_DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN                                           0x1
+
+		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).
+		PSU_DDRC_PCFGW_5_WR_PORT_URGENT_EN                                              0x1
+
+		If set to 1, enables aging function for the write channel of the port.
+		PSU_DDRC_PCFGW_5_WR_PORT_AGING_EN                                               0x0
+
+		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
+		PSU_DDRC_PCFGW_5_WR_PORT_PRIORITY                                               0xf
+
+		Port n Configuration Write Register
+		(OFFSET, MASK, VALUE)      (0XFD070778, 0x000073FFU ,0x0000600FU)  
+		RegMask = (DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_5_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_5_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_5_WR_PORT_PRIORITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_SHIFT
+			| 0x00000001U << DDRC_PCFGW_5_WR_PORT_URGENT_EN_SHIFT
+			| 0x00000000U << DDRC_PCFGW_5_WR_PORT_AGING_EN_SHIFT
+			| 0x0000000FU << DDRC_PCFGW_5_WR_PORT_PRIORITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGW_5_OFFSET ,0x000073FFU ,0x0000600FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCTRL_5 @ 0XFD070800

+
+		Enables port n.
+		PSU_DDRC_PCTRL_5_PORT_EN                                                        0x1
+
+		Port n Control Register
+		(OFFSET, MASK, VALUE)      (0XFD070800, 0x00000001U ,0x00000001U)  
+		RegMask = (DDRC_PCTRL_5_PORT_EN_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCTRL_5_PORT_EN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCTRL_5_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS0_5 @ 0XFD070804

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION1                                            0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
+		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION0                                            0x0
+
+		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.
+		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1                                             0x3
+
+		Port n Read QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD070804, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS0_5_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGQOS1_5 @ 0XFD070808

+
+		Specifies the timeout value for transactions mapped to the red address queue.
+		PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR                                           0x0
+
+		Specifies the timeout value for transactions mapped to the blue address queue.
+		PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB                                           0x4f
+
+		Port n Read QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070808, 0x07FF07FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_SHIFT
+			| 0x0000004FU << DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGQOS1_5_OFFSET ,0x07FF07FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS0_5 @ 0XFD07080C

+
+		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
+		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1                                           0x1
+
+		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
+		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0                                           0x0
+
+		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.
+		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL                                             0x3
+
+		Port n Write QoS Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD07080C, 0x0033000FU ,0x00100003U)  
+		RegMask = (DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_SHIFT
+			| 0x00000000U << DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_SHIFT
+			| 0x00000003U << DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS0_5_OFFSET ,0x0033000FU ,0x00100003U);
+	/*############################################################################################################################ */
+
+		/*Register : PCFGWQOS1_5 @ 0XFD070810

+
+		Specifies the timeout value for write transactions.
+		PSU_DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT                                           0x4f
+
+		Port n Write QoS Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD070810, 0x000007FFU ,0x0000004FU)  
+		RegMask = (DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_PCFGWQOS1_5_OFFSET ,0x000007FFU ,0x0000004FU);
+	/*############################################################################################################################ */
+
+		/*Register : SARBASE0 @ 0XFD070F04

+
+		Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
+		PSU_DDRC_SARBASE0_BASE_ADDR                                                     0x0
+
+		SAR Base Address Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F04, 0x000001FFU ,0x00000000U)  
+		RegMask = (DDRC_SARBASE0_BASE_ADDR_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_SARBASE0_BASE_ADDR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARBASE0_OFFSET ,0x000001FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SARSIZE0 @ 0XFD070F08

+
+		Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.
+		PSU_DDRC_SARSIZE0_NBLOCKS                                                       0x0
+
+		SAR Size Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F08, 0x000000FFU ,0x00000000U)  
+		RegMask = (DDRC_SARSIZE0_NBLOCKS_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDRC_SARSIZE0_NBLOCKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARSIZE0_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SARBASE1 @ 0XFD070F0C

+
+		Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
+		PSU_DDRC_SARBASE1_BASE_ADDR                                                     0x10
+
+		SAR Base Address Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F0C, 0x000001FFU ,0x00000010U)  
+		RegMask = (DDRC_SARBASE1_BASE_ADDR_MASK |  0 );
+
+		RegVal = ((0x00000010U << DDRC_SARBASE1_BASE_ADDR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARBASE1_OFFSET ,0x000001FFU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : SARSIZE1 @ 0XFD070F10

+
+		Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.
+		PSU_DDRC_SARSIZE1_NBLOCKS                                                       0xf
+
+		SAR Size Register n
+		(OFFSET, MASK, VALUE)      (0XFD070F10, 0x000000FFU ,0x0000000FU)  
+		RegMask = (DDRC_SARSIZE1_NBLOCKS_MASK |  0 );
+
+		RegVal = ((0x0000000FU << DDRC_SARSIZE1_NBLOCKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_SARSIZE1_OFFSET ,0x000000FFU ,0x0000000FU);
+	/*############################################################################################################################ */
+
+		/*Register : DFITMG0_SHADOW @ 0XFD072190

+
+		Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY                                        0x7
+
+		Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR                                      0x1
+
+		Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks
+		PSU_DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN                                         0x2
+
+		Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR                                      0x1
+
+		Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks
+		PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA                                         0x0
+
+		Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.
+		PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT                                          0x2
+
+		DFI Timing Shadow Register 0
+		(OFFSET, MASK, VALUE)      (0XFD072190, 0x1FBFBF3FU ,0x07828002U)  
+		RegMask = (DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_MASK | DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_MASK | DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_MASK | DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_MASK | DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_MASK | DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_SHIFT
+			| 0x00000002U << DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_SHIFT
+			| 0x00000001U << DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_SHIFT
+			| 0x00000000U << DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_SHIFT
+			| 0x00000002U << DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDRC_DFITMG0_SHADOW_OFFSET ,0x1FBFBF3FU ,0x07828002U);
+	/*############################################################################################################################ */
+
+		// : DDR CONTROLLER RESET
+		/*Register : RST_DDR_SS @ 0XFD1A0108

+
+		DDR block level reset inside of the DDR Sub System
+		PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X0
+
+		DDR sub system block level reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_DDR_SS_DDR_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_DDR_SS_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : DDR PHY
+		/*Register : PGCR0 @ 0XFD080010

+
+		Address Copy
+		PSU_DDR_PHY_PGCR0_ADCP                                                          0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_30_27                                                0x0
+
+		PHY FIFO Reset
+		PSU_DDR_PHY_PGCR0_PHYFRST                                                       0x1
+
+		Oscillator Mode Address/Command Delay Line Select
+		PSU_DDR_PHY_PGCR0_OSCACDL                                                       0x3
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_23_19                                                0x0
+
+		Digital Test Output Select
+		PSU_DDR_PHY_PGCR0_DTOSEL                                                        0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_13                                                   0x0
+
+		Oscillator Mode Division
+		PSU_DDR_PHY_PGCR0_OSCDIV                                                        0xf
+
+		Oscillator Enable
+		PSU_DDR_PHY_PGCR0_OSCEN                                                         0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PGCR0_RESERVED_7_0                                                  0x0
+
+		PHY General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080010, 0xFFFFFFFFU ,0x07001E00U)  
+		RegMask = (DDR_PHY_PGCR0_ADCP_MASK | DDR_PHY_PGCR0_RESERVED_30_27_MASK | DDR_PHY_PGCR0_PHYFRST_MASK | DDR_PHY_PGCR0_OSCACDL_MASK | DDR_PHY_PGCR0_RESERVED_23_19_MASK | DDR_PHY_PGCR0_DTOSEL_MASK | DDR_PHY_PGCR0_RESERVED_13_MASK | DDR_PHY_PGCR0_OSCDIV_MASK | DDR_PHY_PGCR0_OSCEN_MASK | DDR_PHY_PGCR0_RESERVED_7_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_PGCR0_ADCP_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_30_27_SHIFT
+			| 0x00000001U << DDR_PHY_PGCR0_PHYFRST_SHIFT
+			| 0x00000003U << DDR_PHY_PGCR0_OSCACDL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_23_19_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_DTOSEL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_13_SHIFT
+			| 0x0000000FU << DDR_PHY_PGCR0_OSCDIV_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_OSCEN_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_7_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PGCR0_OFFSET ,0xFFFFFFFFU ,0x07001E00U);
+	/*############################################################################################################################ */
+
+		/*Register : PGCR2 @ 0XFD080018

+
+		Clear Training Status Registers
+		PSU_DDR_PHY_PGCR2_CLRTSTAT                                                      0x0
+
+		Clear Impedance Calibration
+		PSU_DDR_PHY_PGCR2_CLRZCAL                                                       0x0
+
+		Clear Parity Error
+		PSU_DDR_PHY_PGCR2_CLRPERR                                                       0x0
+
+		Initialization Complete Pin Configuration
+		PSU_DDR_PHY_PGCR2_ICPC                                                          0x0
+
+		Data Training PUB Mode Exit Timer
+		PSU_DDR_PHY_PGCR2_DTPMXTMR                                                      0xf
+
+		Initialization Bypass
+		PSU_DDR_PHY_PGCR2_INITFSMBYP                                                    0x0
+
+		PLL FSM Bypass
+		PSU_DDR_PHY_PGCR2_PLLFSMBYP                                                     0x0
+
+		Refresh Period
+		PSU_DDR_PHY_PGCR2_TREFPRD                                                       0x12302
+
+		PHY General Configuration Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080018, 0xFFFFFFFFU ,0x00F12302U)  
+		RegMask = (DDR_PHY_PGCR2_CLRTSTAT_MASK | DDR_PHY_PGCR2_CLRZCAL_MASK | DDR_PHY_PGCR2_CLRPERR_MASK | DDR_PHY_PGCR2_ICPC_MASK | DDR_PHY_PGCR2_DTPMXTMR_MASK | DDR_PHY_PGCR2_INITFSMBYP_MASK | DDR_PHY_PGCR2_PLLFSMBYP_MASK | DDR_PHY_PGCR2_TREFPRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_PGCR2_CLRTSTAT_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_CLRZCAL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_CLRPERR_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_ICPC_SHIFT
+			| 0x0000000FU << DDR_PHY_PGCR2_DTPMXTMR_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_INITFSMBYP_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR2_PLLFSMBYP_SHIFT
+			| 0x00012302U << DDR_PHY_PGCR2_TREFPRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PGCR2_OFFSET ,0xFFFFFFFFU ,0x00F12302U);
+	/*############################################################################################################################ */
+
+		/*Register : PGCR5 @ 0XFD080024

+
+		Frequency B Ratio Term
+		PSU_DDR_PHY_PGCR5_FRQBT                                                         0x1
+
+		Frequency A Ratio Term
+		PSU_DDR_PHY_PGCR5_FRQAT                                                         0x1
+
+		DFI Disconnect Time Period
+		PSU_DDR_PHY_PGCR5_DISCNPERIOD                                                   0x0
+
+		Receiver bias core side control
+		PSU_DDR_PHY_PGCR5_VREF_RBCTRL                                                   0xf
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PGCR5_RESERVED_3                                                    0x0
+
+		Internal VREF generator REFSEL ragne select
+		PSU_DDR_PHY_PGCR5_DXREFISELRANGE                                                0x1
+
+		DDL Page Read Write select
+		PSU_DDR_PHY_PGCR5_DDLPGACT                                                      0x0
+
+		DDL Page Read Write select
+		PSU_DDR_PHY_PGCR5_DDLPGRW                                                       0x0
+
+		PHY General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080024, 0xFFFFFFFFU ,0x010100F4U)  
+		RegMask = (DDR_PHY_PGCR5_FRQBT_MASK | DDR_PHY_PGCR5_FRQAT_MASK | DDR_PHY_PGCR5_DISCNPERIOD_MASK | DDR_PHY_PGCR5_VREF_RBCTRL_MASK | DDR_PHY_PGCR5_RESERVED_3_MASK | DDR_PHY_PGCR5_DXREFISELRANGE_MASK | DDR_PHY_PGCR5_DDLPGACT_MASK | DDR_PHY_PGCR5_DDLPGRW_MASK |  0 );
+
+		RegVal = ((0x00000001U << DDR_PHY_PGCR5_FRQBT_SHIFT
+			| 0x00000001U << DDR_PHY_PGCR5_FRQAT_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_DISCNPERIOD_SHIFT
+			| 0x0000000FU << DDR_PHY_PGCR5_VREF_RBCTRL_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_RESERVED_3_SHIFT
+			| 0x00000001U << DDR_PHY_PGCR5_DXREFISELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_DDLPGACT_SHIFT
+			| 0x00000000U << DDR_PHY_PGCR5_DDLPGRW_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PGCR5_OFFSET ,0xFFFFFFFFU ,0x010100F4U);
+	/*############################################################################################################################ */
+
+		/*Register : PTR0 @ 0XFD080040

+
+		PLL Power-Down Time
+		PSU_DDR_PHY_PTR0_TPLLPD                                                         0x2f0
+
+		PLL Gear Shift Time
+		PSU_DDR_PHY_PTR0_TPLLGS                                                         0x60
+
+		PHY Reset Time
+		PSU_DDR_PHY_PTR0_TPHYRST                                                        0x10
+
+		PHY Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080040, 0xFFFFFFFFU ,0x5E001810U)  
+		RegMask = (DDR_PHY_PTR0_TPLLPD_MASK | DDR_PHY_PTR0_TPLLGS_MASK | DDR_PHY_PTR0_TPHYRST_MASK |  0 );
+
+		RegVal = ((0x000002F0U << DDR_PHY_PTR0_TPLLPD_SHIFT
+			| 0x00000060U << DDR_PHY_PTR0_TPLLGS_SHIFT
+			| 0x00000010U << DDR_PHY_PTR0_TPHYRST_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PTR0_OFFSET ,0xFFFFFFFFU ,0x5E001810U);
+	/*############################################################################################################################ */
+
+		/*Register : PTR1 @ 0XFD080044

+
+		PLL Lock Time
+		PSU_DDR_PHY_PTR1_TPLLLOCK                                                       0x80
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_PTR1_RESERVED_15_13                                                 0x0
+
+		PLL Reset Time
+		PSU_DDR_PHY_PTR1_TPLLRST                                                        0x5f0
+
+		PHY Timing Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080044, 0xFFFFFFFFU ,0x008005F0U)  
+		RegMask = (DDR_PHY_PTR1_TPLLLOCK_MASK | DDR_PHY_PTR1_RESERVED_15_13_MASK | DDR_PHY_PTR1_TPLLRST_MASK |  0 );
+
+		RegVal = ((0x00000080U << DDR_PHY_PTR1_TPLLLOCK_SHIFT
+			| 0x00000000U << DDR_PHY_PTR1_RESERVED_15_13_SHIFT
+			| 0x000005F0U << DDR_PHY_PTR1_TPLLRST_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PTR1_OFFSET ,0xFFFFFFFFU ,0x008005F0U);
+	/*############################################################################################################################ */
+
+		/*Register : DSGCR @ 0XFD080090

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DSGCR_RESERVED_31_28                                                0x0
+
+		When RDBI enabled, this bit is used to select RDBI CL calculation, if it is 1b1, calculation will use RDBICL, otherwise use d
+		fault calculation.
+		PSU_DDR_PHY_DSGCR_RDBICLSEL                                                     0x0
+
+		When RDBI enabled, if RDBICLSEL is asserted, RDBI CL adjust using this value.
+		PSU_DDR_PHY_DSGCR_RDBICL                                                        0x2
+
+		PHY Impedance Update Enable
+		PSU_DDR_PHY_DSGCR_PHYZUEN                                                       0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DSGCR_RESERVED_22                                                   0x0
+
+		SDRAM Reset Output Enable
+		PSU_DDR_PHY_DSGCR_RSTOE                                                         0x1
+
+		Single Data Rate Mode
+		PSU_DDR_PHY_DSGCR_SDRMODE                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DSGCR_RESERVED_18                                                   0x0
+
+		ATO Analog Test Enable
+		PSU_DDR_PHY_DSGCR_ATOAE                                                         0x0
+
+		DTO Output Enable
+		PSU_DDR_PHY_DSGCR_DTOOE                                                         0x0
+
+		DTO I/O Mode
+		PSU_DDR_PHY_DSGCR_DTOIOM                                                        0x0
+
+		DTO Power Down Receiver
+		PSU_DDR_PHY_DSGCR_DTOPDR                                                        0x1
+
+		Reserved. Return zeroes on reads
+		PSU_DDR_PHY_DSGCR_RESERVED_13                                                   0x0
+
+		DTO On-Die Termination
+		PSU_DDR_PHY_DSGCR_DTOODT                                                        0x0
+
+		PHY Update Acknowledge Delay
+		PSU_DDR_PHY_DSGCR_PUAD                                                          0x4
+
+		Controller Update Acknowledge Enable
+		PSU_DDR_PHY_DSGCR_CUAEN                                                         0x1
+
+		Reserved. Return zeroes on reads
+		PSU_DDR_PHY_DSGCR_RESERVED_4_3                                                  0x0
+
+		Controller Impedance Update Enable
+		PSU_DDR_PHY_DSGCR_CTLZUEN                                                       0x0
+
+		Reserved. Return zeroes on reads
+		PSU_DDR_PHY_DSGCR_RESERVED_1                                                    0x0
+
+		PHY Update Request Enable
+		PSU_DDR_PHY_DSGCR_PUREN                                                         0x1
+
+		DDR System General Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD080090, 0xFFFFFFFFU ,0x02A04121U)  
+		RegMask = (DDR_PHY_DSGCR_RESERVED_31_28_MASK | DDR_PHY_DSGCR_RDBICLSEL_MASK | DDR_PHY_DSGCR_RDBICL_MASK | DDR_PHY_DSGCR_PHYZUEN_MASK | DDR_PHY_DSGCR_RESERVED_22_MASK | DDR_PHY_DSGCR_RSTOE_MASK | DDR_PHY_DSGCR_SDRMODE_MASK | DDR_PHY_DSGCR_RESERVED_18_MASK | DDR_PHY_DSGCR_ATOAE_MASK | DDR_PHY_DSGCR_DTOOE_MASK | DDR_PHY_DSGCR_DTOIOM_MASK | DDR_PHY_DSGCR_DTOPDR_MASK | DDR_PHY_DSGCR_RESERVED_13_MASK | DDR_PHY_DSGCR_DTOODT_MASK | DDR_PHY_DSGCR_PUAD_MASK | DDR_PHY_DSGCR_CUAEN_MASK | DDR_PHY_DSGCR_RESERVED_4_3_MASK | DDR_PHY_DSGCR_CTLZUEN_MASK | DDR_PHY_DSGCR_RESERVED_1_MASK | DDR_PHY_DSGCR_PUREN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DSGCR_RESERVED_31_28_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RDBICLSEL_SHIFT
+			| 0x00000002U << DDR_PHY_DSGCR_RDBICL_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_PHYZUEN_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_22_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_RSTOE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_SDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_18_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_ATOAE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_DTOOE_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_DTOIOM_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_DTOPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_13_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_DTOODT_SHIFT
+			| 0x00000004U << DDR_PHY_DSGCR_PUAD_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_CUAEN_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_4_3_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_CTLZUEN_SHIFT
+			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_1_SHIFT
+			| 0x00000001U << DDR_PHY_DSGCR_PUREN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DSGCR_OFFSET ,0xFFFFFFFFU ,0x02A04121U);
+	/*############################################################################################################################ */
+
+		/*Register : DCR @ 0XFD080100

+
+		DDR4 Gear Down Timing.
+		PSU_DDR_PHY_DCR_GEARDN                                                          0x0
+
+		Un-used Bank Group
+		PSU_DDR_PHY_DCR_UBG                                                             0x0
+
+		Un-buffered DIMM Address Mirroring
+		PSU_DDR_PHY_DCR_UDIMM                                                           0x0
+
+		DDR 2T Timing
+		PSU_DDR_PHY_DCR_DDR2T                                                           0x0
+
+		No Simultaneous Rank Access
+		PSU_DDR_PHY_DCR_NOSRA                                                           0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DCR_RESERVED_26_18                                                  0x0
+
+		Byte Mask
+		PSU_DDR_PHY_DCR_BYTEMASK                                                        0x1
+
+		DDR Type
+		PSU_DDR_PHY_DCR_DDRTYPE                                                         0x0
+
+		Multi-Purpose Register (MPR) DQ (DDR3 Only)
+		PSU_DDR_PHY_DCR_MPRDQ                                                           0x0
+
+		Primary DQ (DDR3 Only)
+		PSU_DDR_PHY_DCR_PDQ                                                             0x0
+
+		DDR 8-Bank
+		PSU_DDR_PHY_DCR_DDR8BNK                                                         0x1
+
+		DDR Mode
+		PSU_DDR_PHY_DCR_DDRMD                                                           0x4
+
+		DRAM Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD080100, 0xFFFFFFFFU ,0x0800040CU)  
+		RegMask = (DDR_PHY_DCR_GEARDN_MASK | DDR_PHY_DCR_UBG_MASK | DDR_PHY_DCR_UDIMM_MASK | DDR_PHY_DCR_DDR2T_MASK | DDR_PHY_DCR_NOSRA_MASK | DDR_PHY_DCR_RESERVED_26_18_MASK | DDR_PHY_DCR_BYTEMASK_MASK | DDR_PHY_DCR_DDRTYPE_MASK | DDR_PHY_DCR_MPRDQ_MASK | DDR_PHY_DCR_PDQ_MASK | DDR_PHY_DCR_DDR8BNK_MASK | DDR_PHY_DCR_DDRMD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DCR_GEARDN_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_UBG_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_UDIMM_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_DDR2T_SHIFT
+			| 0x00000001U << DDR_PHY_DCR_NOSRA_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_RESERVED_26_18_SHIFT
+			| 0x00000001U << DDR_PHY_DCR_BYTEMASK_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_DDRTYPE_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_MPRDQ_SHIFT
+			| 0x00000000U << DDR_PHY_DCR_PDQ_SHIFT
+			| 0x00000001U << DDR_PHY_DCR_DDR8BNK_SHIFT
+			| 0x00000004U << DDR_PHY_DCR_DDRMD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DCR_OFFSET ,0xFFFFFFFFU ,0x0800040CU);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR0 @ 0XFD080110

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_31_29                                                0x0
+
+		Activate to activate command delay (different banks)
+		PSU_DDR_PHY_DTPR0_TRRD                                                          0x6
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_23                                                   0x0
+
+		Activate to precharge command delay
+		PSU_DDR_PHY_DTPR0_TRAS                                                          0x24
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_15                                                   0x0
+
+		Precharge command period
+		PSU_DDR_PHY_DTPR0_TRP                                                           0x12
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR0_RESERVED_7_5                                                  0x0
+
+		Internal read to precharge command delay
+		PSU_DDR_PHY_DTPR0_TRTP                                                          0x8
+
+		DRAM Timing Parameters Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080110, 0xFFFFFFFFU ,0x06241208U)  
+		RegMask = (DDR_PHY_DTPR0_RESERVED_31_29_MASK | DDR_PHY_DTPR0_TRRD_MASK | DDR_PHY_DTPR0_RESERVED_23_MASK | DDR_PHY_DTPR0_TRAS_MASK | DDR_PHY_DTPR0_RESERVED_15_MASK | DDR_PHY_DTPR0_TRP_MASK | DDR_PHY_DTPR0_RESERVED_7_5_MASK | DDR_PHY_DTPR0_TRTP_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR0_RESERVED_31_29_SHIFT
+			| 0x00000006U << DDR_PHY_DTPR0_TRRD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_23_SHIFT
+			| 0x00000024U << DDR_PHY_DTPR0_TRAS_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_15_SHIFT
+			| 0x00000012U << DDR_PHY_DTPR0_TRP_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_7_5_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR0_TRTP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR0_OFFSET ,0xFFFFFFFFU ,0x06241208U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR1 @ 0XFD080114

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_31                                                   0x0
+
+		Minimum delay from when write leveling mode is programmed to the first DQS/DQS# rising edge.
+		PSU_DDR_PHY_DTPR1_TWLMRD                                                        0x28
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_23                                                   0x0
+
+		4-bank activate period
+		PSU_DDR_PHY_DTPR1_TFAW                                                          0x18
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_15_11                                                0x0
+
+		Load mode update delay (DDR4 and DDR3 only)
+		PSU_DDR_PHY_DTPR1_TMOD                                                          0x7
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR1_RESERVED_7_5                                                  0x0
+
+		Load mode cycle time
+		PSU_DDR_PHY_DTPR1_TMRD                                                          0x8
+
+		DRAM Timing Parameters Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080114, 0xFFFFFFFFU ,0x28180708U)  
+		RegMask = (DDR_PHY_DTPR1_RESERVED_31_MASK | DDR_PHY_DTPR1_TWLMRD_MASK | DDR_PHY_DTPR1_RESERVED_23_MASK | DDR_PHY_DTPR1_TFAW_MASK | DDR_PHY_DTPR1_RESERVED_15_11_MASK | DDR_PHY_DTPR1_TMOD_MASK | DDR_PHY_DTPR1_RESERVED_7_5_MASK | DDR_PHY_DTPR1_TMRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR1_RESERVED_31_SHIFT
+			| 0x00000028U << DDR_PHY_DTPR1_TWLMRD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_23_SHIFT
+			| 0x00000018U << DDR_PHY_DTPR1_TFAW_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_15_11_SHIFT
+			| 0x00000007U << DDR_PHY_DTPR1_TMOD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_7_5_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR1_TMRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR1_OFFSET ,0xFFFFFFFFU ,0x28180708U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR2 @ 0XFD080118

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_31_29                                                0x0
+
+		Read to Write command delay. Valid values are
+		PSU_DDR_PHY_DTPR2_TRTW                                                          0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_27_25                                                0x0
+
+		Read to ODT delay (DDR3 only)
+		PSU_DDR_PHY_DTPR2_TRTODT                                                        0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_23_20                                                0x0
+
+		CKE minimum pulse width
+		PSU_DDR_PHY_DTPR2_TCKE                                                          0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR2_RESERVED_15_10                                                0x0
+
+		Self refresh exit delay
+		PSU_DDR_PHY_DTPR2_TXS                                                           0x200
+
+		DRAM Timing Parameters Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080118, 0xFFFFFFFFU ,0x00080200U)  
+		RegMask = (DDR_PHY_DTPR2_RESERVED_31_29_MASK | DDR_PHY_DTPR2_TRTW_MASK | DDR_PHY_DTPR2_RESERVED_27_25_MASK | DDR_PHY_DTPR2_TRTODT_MASK | DDR_PHY_DTPR2_RESERVED_23_20_MASK | DDR_PHY_DTPR2_TCKE_MASK | DDR_PHY_DTPR2_RESERVED_15_10_MASK | DDR_PHY_DTPR2_TXS_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR2_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_TRTW_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_27_25_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_TRTODT_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_23_20_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR2_TCKE_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_15_10_SHIFT
+			| 0x00000200U << DDR_PHY_DTPR2_TXS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR2_OFFSET ,0xFFFFFFFFU ,0x00080200U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR3 @ 0XFD08011C

+
+		ODT turn-off delay extension
+		PSU_DDR_PHY_DTPR3_TOFDX                                                         0x4
+
+		Read to read and write to write command delay
+		PSU_DDR_PHY_DTPR3_TCCD                                                          0x0
+
+		DLL locking time
+		PSU_DDR_PHY_DTPR3_TDLLK                                                         0x300
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR3_RESERVED_15_12                                                0x0
+
+		Maximum DQS output access time from CK/CK# (LPDDR2/3 only)
+		PSU_DDR_PHY_DTPR3_TDQSCKMAX                                                     0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR3_RESERVED_7_3                                                  0x0
+
+		DQS output access time from CK/CK# (LPDDR2/3 only)
+		PSU_DDR_PHY_DTPR3_TDQSCK                                                        0x4
+
+		DRAM Timing Parameters Register 3
+		(OFFSET, MASK, VALUE)      (0XFD08011C, 0xFFFFFFFFU ,0x83000804U)  
+		RegMask = (DDR_PHY_DTPR3_TOFDX_MASK | DDR_PHY_DTPR3_TCCD_MASK | DDR_PHY_DTPR3_TDLLK_MASK | DDR_PHY_DTPR3_RESERVED_15_12_MASK | DDR_PHY_DTPR3_TDQSCKMAX_MASK | DDR_PHY_DTPR3_RESERVED_7_3_MASK | DDR_PHY_DTPR3_TDQSCK_MASK |  0 );
+
+		RegVal = ((0x00000004U << DDR_PHY_DTPR3_TOFDX_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR3_TCCD_SHIFT
+			| 0x00000300U << DDR_PHY_DTPR3_TDLLK_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR3_RESERVED_15_12_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR3_TDQSCKMAX_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR3_RESERVED_7_3_SHIFT
+			| 0x00000004U << DDR_PHY_DTPR3_TDQSCK_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR3_OFFSET ,0xFFFFFFFFU ,0x83000804U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR4 @ 0XFD080120

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_31_30                                                0x0
+
+		ODT turn-on/turn-off delays (DDR2 only)
+		PSU_DDR_PHY_DTPR4_TAOND_TAOFD                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_27_26                                                0x0
+
+		Refresh-to-Refresh
+		PSU_DDR_PHY_DTPR4_TRFC                                                          0x116
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_15_14                                                0x0
+
+		Write leveling output delay
+		PSU_DDR_PHY_DTPR4_TWLO                                                          0x2b
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR4_RESERVED_7_5                                                  0x0
+
+		Power down exit delay
+		PSU_DDR_PHY_DTPR4_TXP                                                           0x8
+
+		DRAM Timing Parameters Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080120, 0xFFFFFFFFU ,0x01162B08U)  
+		RegMask = (DDR_PHY_DTPR4_RESERVED_31_30_MASK | DDR_PHY_DTPR4_TAOND_TAOFD_MASK | DDR_PHY_DTPR4_RESERVED_27_26_MASK | DDR_PHY_DTPR4_TRFC_MASK | DDR_PHY_DTPR4_RESERVED_15_14_MASK | DDR_PHY_DTPR4_TWLO_MASK | DDR_PHY_DTPR4_RESERVED_7_5_MASK | DDR_PHY_DTPR4_TXP_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR4_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_TAOND_TAOFD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_27_26_SHIFT
+			| 0x00000116U << DDR_PHY_DTPR4_TRFC_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DTPR4_TWLO_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_7_5_SHIFT
+			| 0x00000008U << DDR_PHY_DTPR4_TXP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR4_OFFSET ,0xFFFFFFFFU ,0x01162B08U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR5 @ 0XFD080124

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR5_RESERVED_31_24                                                0x0
+
+		Activate to activate command delay (same bank)
+		PSU_DDR_PHY_DTPR5_TRC                                                           0x32
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR5_RESERVED_15                                                   0x0
+
+		Activate to read or write delay
+		PSU_DDR_PHY_DTPR5_TRCD                                                          0xf
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR5_RESERVED_7_5                                                  0x0
+
+		Internal write to read command delay
+		PSU_DDR_PHY_DTPR5_TWTR                                                          0x9
+
+		DRAM Timing Parameters Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080124, 0xFFFFFFFFU ,0x00320F09U)  
+		RegMask = (DDR_PHY_DTPR5_RESERVED_31_24_MASK | DDR_PHY_DTPR5_TRC_MASK | DDR_PHY_DTPR5_RESERVED_15_MASK | DDR_PHY_DTPR5_TRCD_MASK | DDR_PHY_DTPR5_RESERVED_7_5_MASK | DDR_PHY_DTPR5_TWTR_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR5_RESERVED_31_24_SHIFT
+			| 0x00000032U << DDR_PHY_DTPR5_TRC_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR5_RESERVED_15_SHIFT
+			| 0x0000000FU << DDR_PHY_DTPR5_TRCD_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR5_RESERVED_7_5_SHIFT
+			| 0x00000009U << DDR_PHY_DTPR5_TWTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR5_OFFSET ,0xFFFFFFFFU ,0x00320F09U);
+	/*############################################################################################################################ */
+
+		/*Register : DTPR6 @ 0XFD080128

+
+		PUB Write Latency Enable
+		PSU_DDR_PHY_DTPR6_PUBWLEN                                                       0x0
+
+		PUB Read Latency Enable
+		PSU_DDR_PHY_DTPR6_PUBRLEN                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR6_RESERVED_29_14                                                0x0
+
+		Write Latency
+		PSU_DDR_PHY_DTPR6_PUBWL                                                         0xe
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTPR6_RESERVED_7_6                                                  0x0
+
+		Read Latency
+		PSU_DDR_PHY_DTPR6_PUBRL                                                         0xf
+
+		DRAM Timing Parameters Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080128, 0xFFFFFFFFU ,0x00000E0FU)  
+		RegMask = (DDR_PHY_DTPR6_PUBWLEN_MASK | DDR_PHY_DTPR6_PUBRLEN_MASK | DDR_PHY_DTPR6_RESERVED_29_14_MASK | DDR_PHY_DTPR6_PUBWL_MASK | DDR_PHY_DTPR6_RESERVED_7_6_MASK | DDR_PHY_DTPR6_PUBRL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTPR6_PUBWLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR6_PUBRLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR6_RESERVED_29_14_SHIFT
+			| 0x0000000EU << DDR_PHY_DTPR6_PUBWL_SHIFT
+			| 0x00000000U << DDR_PHY_DTPR6_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DTPR6_PUBRL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTPR6_OFFSET ,0xFFFFFFFFU ,0x00000E0FU);
+	/*############################################################################################################################ */
+
+		/*Register : RDIMMGCR0 @ 0XFD080140

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_31                                               0x0
+
+		RDMIMM Quad CS Enable
+		PSU_DDR_PHY_RDIMMGCR0_QCSEN                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_29_28                                            0x0
+
+		RDIMM Outputs I/O Mode
+		PSU_DDR_PHY_RDIMMGCR0_RDIMMIOM                                                  0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_26_24                                            0x0
+
+		ERROUT# Output Enable
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTOE                                                  0x0
+
+		ERROUT# I/O Mode
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTIOM                                                 0x1
+
+		ERROUT# Power Down Receiver
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTPDR                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_20                                               0x0
+
+		ERROUT# On-Die Termination
+		PSU_DDR_PHY_RDIMMGCR0_ERROUTODT                                                 0x0
+
+		Load Reduced DIMM
+		PSU_DDR_PHY_RDIMMGCR0_LRDIMM                                                    0x0
+
+		PAR_IN I/O Mode
+		PSU_DDR_PHY_RDIMMGCR0_PARINIOM                                                  0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_16_8                                             0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD                                             0x0
+
+		Rank Mirror Enable.
+		PSU_DDR_PHY_RDIMMGCR0_RNKMRREN                                                  0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR0_RESERVED_3                                                0x0
+
+		Stop on Parity Error
+		PSU_DDR_PHY_RDIMMGCR0_SOPERR                                                    0x0
+
+		Parity Error No Registering
+		PSU_DDR_PHY_RDIMMGCR0_ERRNOREG                                                  0x0
+
+		Registered DIMM
+		PSU_DDR_PHY_RDIMMGCR0_RDIMM                                                     0x0
+
+		RDIMM General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080140, 0xFFFFFFFFU ,0x08400020U)  
+		RegMask = (DDR_PHY_RDIMMGCR0_RESERVED_31_MASK | DDR_PHY_RDIMMGCR0_QCSEN_MASK | DDR_PHY_RDIMMGCR0_RESERVED_29_28_MASK | DDR_PHY_RDIMMGCR0_RDIMMIOM_MASK | DDR_PHY_RDIMMGCR0_RESERVED_26_24_MASK | DDR_PHY_RDIMMGCR0_ERROUTOE_MASK | DDR_PHY_RDIMMGCR0_ERROUTIOM_MASK | DDR_PHY_RDIMMGCR0_ERROUTPDR_MASK | DDR_PHY_RDIMMGCR0_RESERVED_20_MASK | DDR_PHY_RDIMMGCR0_ERROUTODT_MASK | DDR_PHY_RDIMMGCR0_LRDIMM_MASK | DDR_PHY_RDIMMGCR0_PARINIOM_MASK | DDR_PHY_RDIMMGCR0_RESERVED_16_8_MASK | DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_MASK | DDR_PHY_RDIMMGCR0_RNKMRREN_MASK | DDR_PHY_RDIMMGCR0_RESERVED_3_MASK | DDR_PHY_RDIMMGCR0_SOPERR_MASK | DDR_PHY_RDIMMGCR0_ERRNOREG_MASK | DDR_PHY_RDIMMGCR0_RDIMM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_31_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_QCSEN_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_29_28_SHIFT
+			| 0x00000001U << DDR_PHY_RDIMMGCR0_RDIMMIOM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_26_24_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTOE_SHIFT
+			| 0x00000001U << DDR_PHY_RDIMMGCR0_ERROUTIOM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTPDR_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_20_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTODT_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_LRDIMM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_PARINIOM_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_16_8_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_SHIFT
+			| 0x00000002U << DDR_PHY_RDIMMGCR0_RNKMRREN_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_3_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_SOPERR_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERRNOREG_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR0_RDIMM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RDIMMGCR0_OFFSET ,0xFFFFFFFFU ,0x08400020U);
+	/*############################################################################################################################ */
+
+		/*Register : RDIMMGCR1 @ 0XFD080144

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_31_29                                            0x0
+
+		Address [17] B-side Inversion Disable
+		PSU_DDR_PHY_RDIMMGCR1_A17BID                                                    0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_27                                               0x0
+
+		Command word to command word programming delay
+		PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L2                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_23                                               0x0
+
+		Command word to command word programming delay
+		PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L                                                  0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_19                                               0x0
+
+		Command word to command word programming delay
+		PSU_DDR_PHY_RDIMMGCR1_TBCMRD                                                    0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RDIMMGCR1_RESERVED_15_14                                            0x0
+
+		Stabilization time
+		PSU_DDR_PHY_RDIMMGCR1_TBCSTAB                                                   0xc80
+
+		RDIMM General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080144, 0xFFFFFFFFU ,0x00000C80U)  
+		RegMask = (DDR_PHY_RDIMMGCR1_RESERVED_31_29_MASK | DDR_PHY_RDIMMGCR1_A17BID_MASK | DDR_PHY_RDIMMGCR1_RESERVED_27_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_L2_MASK | DDR_PHY_RDIMMGCR1_RESERVED_23_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_L_MASK | DDR_PHY_RDIMMGCR1_RESERVED_19_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_MASK | DDR_PHY_RDIMMGCR1_RESERVED_15_14_MASK | DDR_PHY_RDIMMGCR1_TBCSTAB_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_A17BID_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_27_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_L2_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_23_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_L_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_19_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_15_14_SHIFT
+			| 0x00000C80U << DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RDIMMGCR1_OFFSET ,0xFFFFFFFFU ,0x00000C80U);
+	/*############################################################################################################################ */
+
+		/*Register : RDIMMCR1 @ 0XFD080154

+
+		Control Word 15
+		PSU_DDR_PHY_RDIMMCR1_RC15                                                       0x0
+
+		DDR4 Control Word 14 (Parity Control Word) / DDR3 Reserved
+		PSU_DDR_PHY_RDIMMCR1_RC14                                                       0x0
+
+		DDR4 Control Word 13 (DIMM Configuration Control Word) / DDR3 Reserved
+		PSU_DDR_PHY_RDIMMCR1_RC13                                                       0x0
+
+		DDR4 Control Word 12 (Training Control Word) / DDR3 Reserved
+		PSU_DDR_PHY_RDIMMCR1_RC12                                                       0x0
+
+		DDR4 Control Word 11 (Operating Voltage VDD and VREFCA Source Control Word) / DDR3 Control Word 11 (Operation Voltage VDD Con
+		rol Word)
+		PSU_DDR_PHY_RDIMMCR1_RC11                                                       0x0
+
+		DDR4/DDR3 Control Word 10 (RDIMM Operating Speed Control Word)
+		PSU_DDR_PHY_RDIMMCR1_RC10                                                       0x2
+
+		DDR4/DDR3 Control Word 9 (Power Saving Settings Control Word)
+		PSU_DDR_PHY_RDIMMCR1_RC9                                                        0x0
+
+		DDR4 Control Word 8 (Input/Output Configuration Control Word) / DDR3 Control Word 8 (Additional Input Bus Termination Setting
+		Control Word)
+		PSU_DDR_PHY_RDIMMCR1_RC8                                                        0x0
+
+		RDIMM Control Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080154, 0xFFFFFFFFU ,0x00000200U)  
+		RegMask = (DDR_PHY_RDIMMCR1_RC15_MASK | DDR_PHY_RDIMMCR1_RC14_MASK | DDR_PHY_RDIMMCR1_RC13_MASK | DDR_PHY_RDIMMCR1_RC12_MASK | DDR_PHY_RDIMMCR1_RC11_MASK | DDR_PHY_RDIMMCR1_RC10_MASK | DDR_PHY_RDIMMCR1_RC9_MASK | DDR_PHY_RDIMMCR1_RC8_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RDIMMCR1_RC15_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC14_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC13_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC12_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC11_SHIFT
+			| 0x00000002U << DDR_PHY_RDIMMCR1_RC10_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC9_SHIFT
+			| 0x00000000U << DDR_PHY_RDIMMCR1_RC8_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RDIMMCR1_OFFSET ,0xFFFFFFFFU ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : MR0 @ 0XFD080180

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR0_RESERVED_31_8                                                   0x8
+
+		CA Terminating Rank
+		PSU_DDR_PHY_MR0_CATR                                                            0x0
+
+		Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR0_RSVD_6_5                                                        0x1
+
+		Built-in Self-Test for RZQ
+		PSU_DDR_PHY_MR0_RZQI                                                            0x2
+
+		Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR0_RSVD_2_0                                                        0x0
+
+		LPDDR4 Mode Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080180, 0xFFFFFFFFU ,0x00000830U)  
+		RegMask = (DDR_PHY_MR0_RESERVED_31_8_MASK | DDR_PHY_MR0_CATR_MASK | DDR_PHY_MR0_RSVD_6_5_MASK | DDR_PHY_MR0_RZQI_MASK | DDR_PHY_MR0_RSVD_2_0_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDR_PHY_MR0_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR0_CATR_SHIFT
+			| 0x00000001U << DDR_PHY_MR0_RSVD_6_5_SHIFT
+			| 0x00000002U << DDR_PHY_MR0_RZQI_SHIFT
+			| 0x00000000U << DDR_PHY_MR0_RSVD_2_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR0_OFFSET ,0xFFFFFFFFU ,0x00000830U);
+	/*############################################################################################################################ */
+
+		/*Register : MR1 @ 0XFD080184

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR1_RESERVED_31_8                                                   0x3
+
+		Read Postamble Length
+		PSU_DDR_PHY_MR1_RDPST                                                           0x0
+
+		Write-recovery for auto-precharge command
+		PSU_DDR_PHY_MR1_NWR                                                             0x0
+
+		Read Preamble Length
+		PSU_DDR_PHY_MR1_RDPRE                                                           0x0
+
+		Write Preamble Length
+		PSU_DDR_PHY_MR1_WRPRE                                                           0x0
+
+		Burst Length
+		PSU_DDR_PHY_MR1_BL                                                              0x1
+
+		LPDDR4 Mode Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080184, 0xFFFFFFFFU ,0x00000301U)  
+		RegMask = (DDR_PHY_MR1_RESERVED_31_8_MASK | DDR_PHY_MR1_RDPST_MASK | DDR_PHY_MR1_NWR_MASK | DDR_PHY_MR1_RDPRE_MASK | DDR_PHY_MR1_WRPRE_MASK | DDR_PHY_MR1_BL_MASK |  0 );
+
+		RegVal = ((0x00000003U << DDR_PHY_MR1_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_RDPST_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_NWR_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_RDPRE_SHIFT
+			| 0x00000000U << DDR_PHY_MR1_WRPRE_SHIFT
+			| 0x00000001U << DDR_PHY_MR1_BL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR1_OFFSET ,0xFFFFFFFFU ,0x00000301U);
+	/*############################################################################################################################ */
+
+		/*Register : MR2 @ 0XFD080188

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR2_RESERVED_31_8                                                   0x0
+
+		Write Leveling
+		PSU_DDR_PHY_MR2_WRL                                                             0x0
+
+		Write Latency Set
+		PSU_DDR_PHY_MR2_WLS                                                             0x0
+
+		Write Latency
+		PSU_DDR_PHY_MR2_WL                                                              0x4
+
+		Read Latency
+		PSU_DDR_PHY_MR2_RL                                                              0x0
+
+		LPDDR4 Mode Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080188, 0xFFFFFFFFU ,0x00000020U)  
+		RegMask = (DDR_PHY_MR2_RESERVED_31_8_MASK | DDR_PHY_MR2_WRL_MASK | DDR_PHY_MR2_WLS_MASK | DDR_PHY_MR2_WL_MASK | DDR_PHY_MR2_RL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR2_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR2_WRL_SHIFT
+			| 0x00000000U << DDR_PHY_MR2_WLS_SHIFT
+			| 0x00000004U << DDR_PHY_MR2_WL_SHIFT
+			| 0x00000000U << DDR_PHY_MR2_RL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR2_OFFSET ,0xFFFFFFFFU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : MR3 @ 0XFD08018C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR3_RESERVED_31_8                                                   0x2
+
+		DBI-Write Enable
+		PSU_DDR_PHY_MR3_DBIWR                                                           0x0
+
+		DBI-Read Enable
+		PSU_DDR_PHY_MR3_DBIRD                                                           0x0
+
+		Pull-down Drive Strength
+		PSU_DDR_PHY_MR3_PDDS                                                            0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR3_RSVD                                                            0x0
+
+		Write Postamble Length
+		PSU_DDR_PHY_MR3_WRPST                                                           0x0
+
+		Pull-up Calibration Point
+		PSU_DDR_PHY_MR3_PUCAL                                                           0x0
+
+		LPDDR4 Mode Register 3
+		(OFFSET, MASK, VALUE)      (0XFD08018C, 0xFFFFFFFFU ,0x00000200U)  
+		RegMask = (DDR_PHY_MR3_RESERVED_31_8_MASK | DDR_PHY_MR3_DBIWR_MASK | DDR_PHY_MR3_DBIRD_MASK | DDR_PHY_MR3_PDDS_MASK | DDR_PHY_MR3_RSVD_MASK | DDR_PHY_MR3_WRPST_MASK | DDR_PHY_MR3_PUCAL_MASK |  0 );
+
+		RegVal = ((0x00000002U << DDR_PHY_MR3_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_DBIWR_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_DBIRD_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_PDDS_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_WRPST_SHIFT
+			| 0x00000000U << DDR_PHY_MR3_PUCAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR3_OFFSET ,0xFFFFFFFFU ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : MR4 @ 0XFD080190

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR4_RESERVED_31_16                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR4_RSVD_15_13                                                      0x0
+
+		Write Preamble
+		PSU_DDR_PHY_MR4_WRP                                                             0x0
+
+		Read Preamble
+		PSU_DDR_PHY_MR4_RDP                                                             0x0
+
+		Read Preamble Training Mode
+		PSU_DDR_PHY_MR4_RPTM                                                            0x0
+
+		Self Refresh Abort
+		PSU_DDR_PHY_MR4_SRA                                                             0x0
+
+		CS to Command Latency Mode
+		PSU_DDR_PHY_MR4_CS2CMDL                                                         0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR4_RSVD1                                                           0x0
+
+		Internal VREF Monitor
+		PSU_DDR_PHY_MR4_IVM                                                             0x0
+
+		Temperature Controlled Refresh Mode
+		PSU_DDR_PHY_MR4_TCRM                                                            0x0
+
+		Temperature Controlled Refresh Range
+		PSU_DDR_PHY_MR4_TCRR                                                            0x0
+
+		Maximum Power Down Mode
+		PSU_DDR_PHY_MR4_MPDM                                                            0x0
+
+		This is a JEDEC reserved bit and is recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR4_RSVD_0                                                          0x0
+
+		DDR4 Mode Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080190, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_MR4_RESERVED_31_16_MASK | DDR_PHY_MR4_RSVD_15_13_MASK | DDR_PHY_MR4_WRP_MASK | DDR_PHY_MR4_RDP_MASK | DDR_PHY_MR4_RPTM_MASK | DDR_PHY_MR4_SRA_MASK | DDR_PHY_MR4_CS2CMDL_MASK | DDR_PHY_MR4_RSVD1_MASK | DDR_PHY_MR4_IVM_MASK | DDR_PHY_MR4_TCRM_MASK | DDR_PHY_MR4_TCRR_MASK | DDR_PHY_MR4_MPDM_MASK | DDR_PHY_MR4_RSVD_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR4_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RSVD_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_WRP_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RDP_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RPTM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_SRA_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_CS2CMDL_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RSVD1_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_IVM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_TCRM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_TCRR_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_MPDM_SHIFT
+			| 0x00000000U << DDR_PHY_MR4_RSVD_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR4_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MR5 @ 0XFD080194

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR5_RESERVED_31_16                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR5_RSVD                                                            0x0
+
+		Read DBI
+		PSU_DDR_PHY_MR5_RDBI                                                            0x0
+
+		Write DBI
+		PSU_DDR_PHY_MR5_WDBI                                                            0x0
+
+		Data Mask
+		PSU_DDR_PHY_MR5_DM                                                              0x1
+
+		CA Parity Persistent Error
+		PSU_DDR_PHY_MR5_CAPPE                                                           0x1
+
+		RTT_PARK
+		PSU_DDR_PHY_MR5_RTTPARK                                                         0x3
+
+		ODT Input Buffer during Power Down mode
+		PSU_DDR_PHY_MR5_ODTIBPD                                                         0x0
+
+		C/A Parity Error Status
+		PSU_DDR_PHY_MR5_CAPES                                                           0x0
+
+		CRC Error Clear
+		PSU_DDR_PHY_MR5_CRCEC                                                           0x0
+
+		C/A Parity Latency Mode
+		PSU_DDR_PHY_MR5_CAPM                                                            0x0
+
+		DDR4 Mode Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080194, 0xFFFFFFFFU ,0x000006C0U)  
+		RegMask = (DDR_PHY_MR5_RESERVED_31_16_MASK | DDR_PHY_MR5_RSVD_MASK | DDR_PHY_MR5_RDBI_MASK | DDR_PHY_MR5_WDBI_MASK | DDR_PHY_MR5_DM_MASK | DDR_PHY_MR5_CAPPE_MASK | DDR_PHY_MR5_RTTPARK_MASK | DDR_PHY_MR5_ODTIBPD_MASK | DDR_PHY_MR5_CAPES_MASK | DDR_PHY_MR5_CRCEC_MASK | DDR_PHY_MR5_CAPM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR5_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_WDBI_SHIFT
+			| 0x00000001U << DDR_PHY_MR5_DM_SHIFT
+			| 0x00000001U << DDR_PHY_MR5_CAPPE_SHIFT
+			| 0x00000003U << DDR_PHY_MR5_RTTPARK_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_ODTIBPD_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_CAPES_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_CRCEC_SHIFT
+			| 0x00000000U << DDR_PHY_MR5_CAPM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR5_OFFSET ,0xFFFFFFFFU ,0x000006C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MR6 @ 0XFD080198

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR6_RESERVED_31_16                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR6_RSVD_15_13                                                      0x0
+
+		CAS_n to CAS_n command delay for same bank group (tCCD_L)
+		PSU_DDR_PHY_MR6_TCCDL                                                           0x2
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR6_RSVD_9_8                                                        0x0
+
+		VrefDQ Training Enable
+		PSU_DDR_PHY_MR6_VDDQTEN                                                         0x0
+
+		VrefDQ Training Range
+		PSU_DDR_PHY_MR6_VDQTRG                                                          0x0
+
+		VrefDQ Training Values
+		PSU_DDR_PHY_MR6_VDQTVAL                                                         0x19
+
+		DDR4 Mode Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080198, 0xFFFFFFFFU ,0x00000819U)  
+		RegMask = (DDR_PHY_MR6_RESERVED_31_16_MASK | DDR_PHY_MR6_RSVD_15_13_MASK | DDR_PHY_MR6_TCCDL_MASK | DDR_PHY_MR6_RSVD_9_8_MASK | DDR_PHY_MR6_VDDQTEN_MASK | DDR_PHY_MR6_VDQTRG_MASK | DDR_PHY_MR6_VDQTVAL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR6_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_RSVD_15_13_SHIFT
+			| 0x00000002U << DDR_PHY_MR6_TCCDL_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_RSVD_9_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_VDDQTEN_SHIFT
+			| 0x00000000U << DDR_PHY_MR6_VDQTRG_SHIFT
+			| 0x00000019U << DDR_PHY_MR6_VDQTVAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR6_OFFSET ,0xFFFFFFFFU ,0x00000819U);
+	/*############################################################################################################################ */
+
+		/*Register : MR11 @ 0XFD0801AC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR11_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR11_RSVD                                                           0x0
+
+		Power Down Control
+		PSU_DDR_PHY_MR11_PDCTL                                                          0x0
+
+		DQ Bus Receiver On-Die-Termination
+		PSU_DDR_PHY_MR11_DQODT                                                          0x0
+
+		LPDDR4 Mode Register 11
+		(OFFSET, MASK, VALUE)      (0XFD0801AC, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_MR11_RESERVED_31_8_MASK | DDR_PHY_MR11_RSVD_MASK | DDR_PHY_MR11_PDCTL_MASK | DDR_PHY_MR11_DQODT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR11_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR11_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR11_PDCTL_SHIFT
+			| 0x00000000U << DDR_PHY_MR11_DQODT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR11_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MR12 @ 0XFD0801B0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR12_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR12_RSVD                                                           0x0
+
+		VREF_CA Range Select.
+		PSU_DDR_PHY_MR12_VR_CA                                                          0x1
+
+		Controls the VREF(ca) levels for Frequency-Set-Point[1:0].
+		PSU_DDR_PHY_MR12_VREF_CA                                                        0xd
+
+		LPDDR4 Mode Register 12
+		(OFFSET, MASK, VALUE)      (0XFD0801B0, 0xFFFFFFFFU ,0x0000004DU)  
+		RegMask = (DDR_PHY_MR12_RESERVED_31_8_MASK | DDR_PHY_MR12_RSVD_MASK | DDR_PHY_MR12_VR_CA_MASK | DDR_PHY_MR12_VREF_CA_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR12_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR12_RSVD_SHIFT
+			| 0x00000001U << DDR_PHY_MR12_VR_CA_SHIFT
+			| 0x0000000DU << DDR_PHY_MR12_VREF_CA_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR12_OFFSET ,0xFFFFFFFFU ,0x0000004DU);
+	/*############################################################################################################################ */
+
+		/*Register : MR13 @ 0XFD0801B4

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR13_RESERVED_31_8                                                  0x0
+
+		Frequency Set Point Operation Mode
+		PSU_DDR_PHY_MR13_FSPOP                                                          0x0
+
+		Frequency Set Point Write Enable
+		PSU_DDR_PHY_MR13_FSPWR                                                          0x0
+
+		Data Mask Enable
+		PSU_DDR_PHY_MR13_DMD                                                            0x0
+
+		Refresh Rate Option
+		PSU_DDR_PHY_MR13_RRO                                                            0x0
+
+		VREF Current Generator
+		PSU_DDR_PHY_MR13_VRCG                                                           0x1
+
+		VREF Output
+		PSU_DDR_PHY_MR13_VRO                                                            0x0
+
+		Read Preamble Training Mode
+		PSU_DDR_PHY_MR13_RPT                                                            0x0
+
+		Command Bus Training
+		PSU_DDR_PHY_MR13_CBT                                                            0x0
+
+		LPDDR4 Mode Register 13
+		(OFFSET, MASK, VALUE)      (0XFD0801B4, 0xFFFFFFFFU ,0x00000008U)  
+		RegMask = (DDR_PHY_MR13_RESERVED_31_8_MASK | DDR_PHY_MR13_FSPOP_MASK | DDR_PHY_MR13_FSPWR_MASK | DDR_PHY_MR13_DMD_MASK | DDR_PHY_MR13_RRO_MASK | DDR_PHY_MR13_VRCG_MASK | DDR_PHY_MR13_VRO_MASK | DDR_PHY_MR13_RPT_MASK | DDR_PHY_MR13_CBT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR13_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_FSPOP_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_FSPWR_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_DMD_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_RRO_SHIFT
+			| 0x00000001U << DDR_PHY_MR13_VRCG_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_VRO_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_RPT_SHIFT
+			| 0x00000000U << DDR_PHY_MR13_CBT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR13_OFFSET ,0xFFFFFFFFU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MR14 @ 0XFD0801B8

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR14_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR14_RSVD                                                           0x0
+
+		VREFDQ Range Selects.
+		PSU_DDR_PHY_MR14_VR_DQ                                                          0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR14_VREF_DQ                                                        0xd
+
+		LPDDR4 Mode Register 14
+		(OFFSET, MASK, VALUE)      (0XFD0801B8, 0xFFFFFFFFU ,0x0000004DU)  
+		RegMask = (DDR_PHY_MR14_RESERVED_31_8_MASK | DDR_PHY_MR14_RSVD_MASK | DDR_PHY_MR14_VR_DQ_MASK | DDR_PHY_MR14_VREF_DQ_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR14_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR14_RSVD_SHIFT
+			| 0x00000001U << DDR_PHY_MR14_VR_DQ_SHIFT
+			| 0x0000000DU << DDR_PHY_MR14_VREF_DQ_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR14_OFFSET ,0xFFFFFFFFU ,0x0000004DU);
+	/*############################################################################################################################ */
+
+		/*Register : MR22 @ 0XFD0801D8

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_MR22_RESERVED_31_8                                                  0x0
+
+		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
+		PSU_DDR_PHY_MR22_RSVD                                                           0x0
+
+		CA ODT termination disable.
+		PSU_DDR_PHY_MR22_ODTD_CA                                                        0x0
+
+		ODT CS override.
+		PSU_DDR_PHY_MR22_ODTE_CS                                                        0x0
+
+		ODT CK override.
+		PSU_DDR_PHY_MR22_ODTE_CK                                                        0x0
+
+		Controller ODT value for VOH calibration.
+		PSU_DDR_PHY_MR22_CODT                                                           0x0
+
+		LPDDR4 Mode Register 22
+		(OFFSET, MASK, VALUE)      (0XFD0801D8, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_MR22_RESERVED_31_8_MASK | DDR_PHY_MR22_RSVD_MASK | DDR_PHY_MR22_ODTD_CA_MASK | DDR_PHY_MR22_ODTE_CS_MASK | DDR_PHY_MR22_ODTE_CK_MASK | DDR_PHY_MR22_CODT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_MR22_RESERVED_31_8_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_RSVD_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_ODTD_CA_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_ODTE_CS_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_ODTE_CK_SHIFT
+			| 0x00000000U << DDR_PHY_MR22_CODT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_MR22_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DTCR0 @ 0XFD080200

+
+		Refresh During Training
+		PSU_DDR_PHY_DTCR0_RFSHDT                                                        0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR0_RESERVED_27_26                                                0x0
+
+		Data Training Debug Rank Select
+		PSU_DDR_PHY_DTCR0_DTDRS                                                         0x1
+
+		Data Training with Early/Extended Gate
+		PSU_DDR_PHY_DTCR0_DTEXG                                                         0x0
+
+		Data Training Extended Write DQS
+		PSU_DDR_PHY_DTCR0_DTEXD                                                         0x0
+
+		Data Training Debug Step
+		PSU_DDR_PHY_DTCR0_DTDSTP                                                        0x0
+
+		Data Training Debug Enable
+		PSU_DDR_PHY_DTCR0_DTDEN                                                         0x0
+
+		Data Training Debug Byte Select
+		PSU_DDR_PHY_DTCR0_DTDBS                                                         0x0
+
+		Data Training read DBI deskewing configuration
+		PSU_DDR_PHY_DTCR0_DTRDBITR                                                      0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR0_RESERVED_13                                                   0x0
+
+		Data Training Write Bit Deskew Data Mask
+		PSU_DDR_PHY_DTCR0_DTWBDDM                                                       0x1
+
+		Refreshes Issued During Entry to Training
+		PSU_DDR_PHY_DTCR0_RFSHEN                                                        0x1
+
+		Data Training Compare Data
+		PSU_DDR_PHY_DTCR0_DTCMPD                                                        0x1
+
+		Data Training Using MPR
+		PSU_DDR_PHY_DTCR0_DTMPR                                                         0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR0_RESERVED_5_4                                                  0x0
+
+		Data Training Repeat Number
+		PSU_DDR_PHY_DTCR0_DTRPTN                                                        0x7
+
+		Data Training Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080200, 0xFFFFFFFFU ,0x810011C7U)  
+		RegMask = (DDR_PHY_DTCR0_RFSHDT_MASK | DDR_PHY_DTCR0_RESERVED_27_26_MASK | DDR_PHY_DTCR0_DTDRS_MASK | DDR_PHY_DTCR0_DTEXG_MASK | DDR_PHY_DTCR0_DTEXD_MASK | DDR_PHY_DTCR0_DTDSTP_MASK | DDR_PHY_DTCR0_DTDEN_MASK | DDR_PHY_DTCR0_DTDBS_MASK | DDR_PHY_DTCR0_DTRDBITR_MASK | DDR_PHY_DTCR0_RESERVED_13_MASK | DDR_PHY_DTCR0_DTWBDDM_MASK | DDR_PHY_DTCR0_RFSHEN_MASK | DDR_PHY_DTCR0_DTCMPD_MASK | DDR_PHY_DTCR0_DTMPR_MASK | DDR_PHY_DTCR0_RESERVED_5_4_MASK | DDR_PHY_DTCR0_DTRPTN_MASK |  0 );
+
+		RegVal = ((0x00000008U << DDR_PHY_DTCR0_RFSHDT_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_27_26_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTDRS_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTEXG_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTEXD_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTDSTP_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTDBS_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_DTRDBITR_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_13_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTWBDDM_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_RFSHEN_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTCMPD_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR0_DTMPR_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_5_4_SHIFT
+			| 0x00000007U << DDR_PHY_DTCR0_DTRPTN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTCR0_OFFSET ,0xFFFFFFFFU ,0x810011C7U);
+	/*############################################################################################################################ */
+
+		/*Register : DTCR1 @ 0XFD080204

+
+		Rank Enable.
+		PSU_DDR_PHY_DTCR1_RANKEN_RSVD                                                   0x0
+
+		Rank Enable.
+		PSU_DDR_PHY_DTCR1_RANKEN                                                        0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_15_14                                                0x0
+
+		Data Training Rank
+		PSU_DDR_PHY_DTCR1_DTRANK                                                        0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_11                                                   0x0
+
+		Read Leveling Gate Sampling Difference
+		PSU_DDR_PHY_DTCR1_RDLVLGDIFF                                                    0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_7                                                    0x0
+
+		Read Leveling Gate Shift
+		PSU_DDR_PHY_DTCR1_RDLVLGS                                                       0x3
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DTCR1_RESERVED_3                                                    0x0
+
+		Read Preamble Training enable
+		PSU_DDR_PHY_DTCR1_RDPRMVL_TRN                                                   0x1
+
+		Read Leveling Enable
+		PSU_DDR_PHY_DTCR1_RDLVLEN                                                       0x1
+
+		Basic Gate Training Enable
+		PSU_DDR_PHY_DTCR1_BSTEN                                                         0x0
+
+		Data Training Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080204, 0xFFFFFFFFU ,0x00010236U)  
+		RegMask = (DDR_PHY_DTCR1_RANKEN_RSVD_MASK | DDR_PHY_DTCR1_RANKEN_MASK | DDR_PHY_DTCR1_RESERVED_15_14_MASK | DDR_PHY_DTCR1_DTRANK_MASK | DDR_PHY_DTCR1_RESERVED_11_MASK | DDR_PHY_DTCR1_RDLVLGDIFF_MASK | DDR_PHY_DTCR1_RESERVED_7_MASK | DDR_PHY_DTCR1_RDLVLGS_MASK | DDR_PHY_DTCR1_RESERVED_3_MASK | DDR_PHY_DTCR1_RDPRMVL_TRN_MASK | DDR_PHY_DTCR1_RDLVLEN_MASK | DDR_PHY_DTCR1_BSTEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DTCR1_RANKEN_RSVD_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR1_RANKEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_DTRANK_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_11_SHIFT
+			| 0x00000002U << DDR_PHY_DTCR1_RDLVLGDIFF_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_7_SHIFT
+			| 0x00000003U << DDR_PHY_DTCR1_RDLVLGS_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_3_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR1_RDPRMVL_TRN_SHIFT
+			| 0x00000001U << DDR_PHY_DTCR1_RDLVLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DTCR1_BSTEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DTCR1_OFFSET ,0xFFFFFFFFU ,0x00010236U);
+	/*############################################################################################################################ */
+
+		/*Register : CATR0 @ 0XFD080240

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_CATR0_RESERVED_31_21                                                0x0
+
+		Minimum time (in terms of number of dram clocks) between two consectuve CA calibration command
+		PSU_DDR_PHY_CATR0_CACD                                                          0x14
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_CATR0_RESERVED_15_13                                                0x0
+
+		Minimum time (in terms of number of dram clocks) PUB should wait before sampling the CA response after Calibration command ha
+		 been sent to the memory
+		PSU_DDR_PHY_CATR0_CAADR                                                         0x10
+
+		CA_1 Response Byte Lane 1
+		PSU_DDR_PHY_CATR0_CA1BYTE1                                                      0x5
+
+		CA_1 Response Byte Lane 0
+		PSU_DDR_PHY_CATR0_CA1BYTE0                                                      0x4
+
+		CA Training Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080240, 0xFFFFFFFFU ,0x00141054U)  
+		RegMask = (DDR_PHY_CATR0_RESERVED_31_21_MASK | DDR_PHY_CATR0_CACD_MASK | DDR_PHY_CATR0_RESERVED_15_13_MASK | DDR_PHY_CATR0_CAADR_MASK | DDR_PHY_CATR0_CA1BYTE1_MASK | DDR_PHY_CATR0_CA1BYTE0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_CATR0_RESERVED_31_21_SHIFT
+			| 0x00000014U << DDR_PHY_CATR0_CACD_SHIFT
+			| 0x00000000U << DDR_PHY_CATR0_RESERVED_15_13_SHIFT
+			| 0x00000010U << DDR_PHY_CATR0_CAADR_SHIFT
+			| 0x00000005U << DDR_PHY_CATR0_CA1BYTE1_SHIFT
+			| 0x00000004U << DDR_PHY_CATR0_CA1BYTE0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_CATR0_OFFSET ,0xFFFFFFFFU ,0x00141054U);
+	/*############################################################################################################################ */
+
+		/*Register : RIOCR5 @ 0XFD0804F4

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_RIOCR5_RESERVED_31_16                                               0x0
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_RIOCR5_ODTOEMODE_RSVD                                               0x0
+
+		SDRAM On-die Termination Output Enable (OE) Mode Selection.
+		PSU_DDR_PHY_RIOCR5_ODTOEMODE                                                    0x5
+
+		Rank I/O Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD0804F4, 0xFFFFFFFFU ,0x00000005U)  
+		RegMask = (DDR_PHY_RIOCR5_RESERVED_31_16_MASK | DDR_PHY_RIOCR5_ODTOEMODE_RSVD_MASK | DDR_PHY_RIOCR5_ODTOEMODE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT
+			| 0x00000000U << DDR_PHY_RIOCR5_ODTOEMODE_RSVD_SHIFT
+			| 0x00000005U << DDR_PHY_RIOCR5_ODTOEMODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_RIOCR5_OFFSET ,0xFFFFFFFFU ,0x00000005U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR0 @ 0XFD080500

+
+		Address/Command Slew Rate (D3F I/O Only)
+		PSU_DDR_PHY_ACIOCR0_ACSR                                                        0x0
+
+		SDRAM Reset I/O Mode
+		PSU_DDR_PHY_ACIOCR0_RSTIOM                                                      0x1
+
+		SDRAM Reset Power Down Receiver
+		PSU_DDR_PHY_ACIOCR0_RSTPDR                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR0_RESERVED_27                                                 0x0
+
+		SDRAM Reset On-Die Termination
+		PSU_DDR_PHY_ACIOCR0_RSTODT                                                      0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR0_RESERVED_25_10                                              0x0
+
+		CK Duty Cycle Correction
+		PSU_DDR_PHY_ACIOCR0_CKDCC                                                       0x0
+
+		AC Power Down Receiver Mode
+		PSU_DDR_PHY_ACIOCR0_ACPDRMODE                                                   0x2
+
+		AC On-die Termination Mode
+		PSU_DDR_PHY_ACIOCR0_ACODTMODE                                                   0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR0_RESERVED_1                                                  0x0
+
+		Control delayed or non-delayed clock to CS_N/ODT?CKE AC slices.
+		PSU_DDR_PHY_ACIOCR0_ACRANKCLKSEL                                                0x0
+
+		AC I/O Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080500, 0xFFFFFFFFU ,0x30000028U)  
+		RegMask = (DDR_PHY_ACIOCR0_ACSR_MASK | DDR_PHY_ACIOCR0_RSTIOM_MASK | DDR_PHY_ACIOCR0_RSTPDR_MASK | DDR_PHY_ACIOCR0_RESERVED_27_MASK | DDR_PHY_ACIOCR0_RSTODT_MASK | DDR_PHY_ACIOCR0_RESERVED_25_10_MASK | DDR_PHY_ACIOCR0_CKDCC_MASK | DDR_PHY_ACIOCR0_ACPDRMODE_MASK | DDR_PHY_ACIOCR0_ACODTMODE_MASK | DDR_PHY_ACIOCR0_RESERVED_1_MASK | DDR_PHY_ACIOCR0_ACRANKCLKSEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR0_ACSR_SHIFT
+			| 0x00000001U << DDR_PHY_ACIOCR0_RSTIOM_SHIFT
+			| 0x00000001U << DDR_PHY_ACIOCR0_RSTPDR_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_27_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RSTODT_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_25_10_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_CKDCC_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR0_ACPDRMODE_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR0_ACODTMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR0_ACRANKCLKSEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR0_OFFSET ,0xFFFFFFFFU ,0x30000028U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR2 @ 0XFD080508

+
+		Clock gating for glue logic inside CLKGEN and glue logic inside CONTROL slice
+		PSU_DDR_PHY_ACIOCR2_CLKGENCLKGATE                                               0x0
+
+		Clock gating for Output Enable D slices [0]
+		PSU_DDR_PHY_ACIOCR2_ACOECLKGATE0                                                0x0
+
+		Clock gating for Power Down Receiver D slices [0]
+		PSU_DDR_PHY_ACIOCR2_ACPDRCLKGATE0                                               0x0
+
+		Clock gating for Termination Enable D slices [0]
+		PSU_DDR_PHY_ACIOCR2_ACTECLKGATE0                                                0x0
+
+		Clock gating for CK# D slices [1:0]
+		PSU_DDR_PHY_ACIOCR2_CKNCLKGATE0                                                 0x2
+
+		Clock gating for CK D slices [1:0]
+		PSU_DDR_PHY_ACIOCR2_CKCLKGATE0                                                  0x2
+
+		Clock gating for AC D slices [23:0]
+		PSU_DDR_PHY_ACIOCR2_ACCLKGATE0                                                  0x0
+
+		AC I/O Configuration Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080508, 0xFFFFFFFFU ,0x0A000000U)  
+		RegMask = (DDR_PHY_ACIOCR2_CLKGENCLKGATE_MASK | DDR_PHY_ACIOCR2_ACOECLKGATE0_MASK | DDR_PHY_ACIOCR2_ACPDRCLKGATE0_MASK | DDR_PHY_ACIOCR2_ACTECLKGATE0_MASK | DDR_PHY_ACIOCR2_CKNCLKGATE0_MASK | DDR_PHY_ACIOCR2_CKCLKGATE0_MASK | DDR_PHY_ACIOCR2_ACCLKGATE0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR2_CLKGENCLKGATE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACOECLKGATE0_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACPDRCLKGATE0_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACTECLKGATE0_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR2_CKNCLKGATE0_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR2_CKCLKGATE0_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR2_ACCLKGATE0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR2_OFFSET ,0xFFFFFFFFU ,0x0A000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR3 @ 0XFD08050C

+
+		SDRAM Parity Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_PAROEMODE                                                   0x0
+
+		SDRAM Bank Group Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_BGOEMODE                                                    0x0
+
+		SDRAM Bank Address Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_BAOEMODE                                                    0x0
+
+		SDRAM A[17] Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_A17OEMODE                                                   0x0
+
+		SDRAM A[16] / RAS_n Output Enable (OE) Mode Selection
+		PSU_DDR_PHY_ACIOCR3_A16OEMODE                                                   0x0
+
+		SDRAM ACT_n Output Enable (OE) Mode Selection (DDR4 only)
+		PSU_DDR_PHY_ACIOCR3_ACTOEMODE                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACIOCR3_RESERVED_15_8                                               0x0
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ACIOCR3_CKOEMODE_RSVD                                               0x0
+
+		SDRAM CK Output Enable (OE) Mode Selection.
+		PSU_DDR_PHY_ACIOCR3_CKOEMODE                                                    0x9
+
+		AC I/O Configuration Register 3
+		(OFFSET, MASK, VALUE)      (0XFD08050C, 0xFFFFFFFFU ,0x00000009U)  
+		RegMask = (DDR_PHY_ACIOCR3_PAROEMODE_MASK | DDR_PHY_ACIOCR3_BGOEMODE_MASK | DDR_PHY_ACIOCR3_BAOEMODE_MASK | DDR_PHY_ACIOCR3_A17OEMODE_MASK | DDR_PHY_ACIOCR3_A16OEMODE_MASK | DDR_PHY_ACIOCR3_ACTOEMODE_MASK | DDR_PHY_ACIOCR3_RESERVED_15_8_MASK | DDR_PHY_ACIOCR3_CKOEMODE_RSVD_MASK | DDR_PHY_ACIOCR3_CKOEMODE_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR3_PAROEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_BGOEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_BAOEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_A17OEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_A16OEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_ACTOEMODE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_RESERVED_15_8_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR3_CKOEMODE_RSVD_SHIFT
+			| 0x00000009U << DDR_PHY_ACIOCR3_CKOEMODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR3_OFFSET ,0xFFFFFFFFU ,0x00000009U);
+	/*############################################################################################################################ */
+
+		/*Register : ACIOCR4 @ 0XFD080510

+
+		Clock gating for AC LB slices and loopback read valid slices
+		PSU_DDR_PHY_ACIOCR4_LBCLKGATE                                                   0x0
+
+		Clock gating for Output Enable D slices [1]
+		PSU_DDR_PHY_ACIOCR4_ACOECLKGATE1                                                0x0
+
+		Clock gating for Power Down Receiver D slices [1]
+		PSU_DDR_PHY_ACIOCR4_ACPDRCLKGATE1                                               0x0
+
+		Clock gating for Termination Enable D slices [1]
+		PSU_DDR_PHY_ACIOCR4_ACTECLKGATE1                                                0x0
+
+		Clock gating for CK# D slices [3:2]
+		PSU_DDR_PHY_ACIOCR4_CKNCLKGATE1                                                 0x2
+
+		Clock gating for CK D slices [3:2]
+		PSU_DDR_PHY_ACIOCR4_CKCLKGATE1                                                  0x2
+
+		Clock gating for AC D slices [47:24]
+		PSU_DDR_PHY_ACIOCR4_ACCLKGATE1                                                  0x0
+
+		AC I/O Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080510, 0xFFFFFFFFU ,0x0A000000U)  
+		RegMask = (DDR_PHY_ACIOCR4_LBCLKGATE_MASK | DDR_PHY_ACIOCR4_ACOECLKGATE1_MASK | DDR_PHY_ACIOCR4_ACPDRCLKGATE1_MASK | DDR_PHY_ACIOCR4_ACTECLKGATE1_MASK | DDR_PHY_ACIOCR4_CKNCLKGATE1_MASK | DDR_PHY_ACIOCR4_CKCLKGATE1_MASK | DDR_PHY_ACIOCR4_ACCLKGATE1_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACIOCR4_LBCLKGATE_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACOECLKGATE1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACPDRCLKGATE1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACTECLKGATE1_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR4_CKNCLKGATE1_SHIFT
+			| 0x00000002U << DDR_PHY_ACIOCR4_CKCLKGATE1_SHIFT
+			| 0x00000000U << DDR_PHY_ACIOCR4_ACCLKGATE1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACIOCR4_OFFSET ,0xFFFFFFFFU ,0x0A000000U);
+	/*############################################################################################################################ */
+
+		/*Register : IOVCR0 @ 0XFD080520

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_IOVCR0_RESERVED_31_29                                               0x0
+
+		Address/command lane VREF Pad Enable
+		PSU_DDR_PHY_IOVCR0_ACREFPEN                                                     0x0
+
+		Address/command lane Internal VREF Enable
+		PSU_DDR_PHY_IOVCR0_ACREFEEN                                                     0x0
+
+		Address/command lane Single-End VREF Enable
+		PSU_DDR_PHY_IOVCR0_ACREFSEN                                                     0x1
+
+		Address/command lane Internal VREF Enable
+		PSU_DDR_PHY_IOVCR0_ACREFIEN                                                     0x1
+
+		External VREF generato REFSEL range select
+		PSU_DDR_PHY_IOVCR0_ACREFESELRANGE                                               0x0
+
+		Address/command lane External VREF Select
+		PSU_DDR_PHY_IOVCR0_ACREFESEL                                                    0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_IOVCR0_ACREFSSELRANGE                                               0x1
+
+		Address/command lane Single-End VREF Select
+		PSU_DDR_PHY_IOVCR0_ACREFSSEL                                                    0x30
+
+		Internal VREF generator REFSEL ragne select
+		PSU_DDR_PHY_IOVCR0_ACVREFISELRANGE                                              0x1
+
+		REFSEL Control for internal AC IOs
+		PSU_DDR_PHY_IOVCR0_ACVREFISEL                                                   0x30
+
+		IO VREF Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080520, 0xFFFFFFFFU ,0x0300B0B0U)  
+		RegMask = (DDR_PHY_IOVCR0_RESERVED_31_29_MASK | DDR_PHY_IOVCR0_ACREFPEN_MASK | DDR_PHY_IOVCR0_ACREFEEN_MASK | DDR_PHY_IOVCR0_ACREFSEN_MASK | DDR_PHY_IOVCR0_ACREFIEN_MASK | DDR_PHY_IOVCR0_ACREFESELRANGE_MASK | DDR_PHY_IOVCR0_ACREFESEL_MASK | DDR_PHY_IOVCR0_ACREFSSELRANGE_MASK | DDR_PHY_IOVCR0_ACREFSSEL_MASK | DDR_PHY_IOVCR0_ACVREFISELRANGE_MASK | DDR_PHY_IOVCR0_ACVREFISEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_IOVCR0_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFPEN_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACREFSEN_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_IOVCR0_ACREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_IOVCR0_ACREFSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_IOVCR0_ACVREFISELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_IOVCR0_ACVREFISEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_IOVCR0_OFFSET ,0xFFFFFFFFU ,0x0300B0B0U);
+	/*############################################################################################################################ */
+
+		/*Register : VTCR0 @ 0XFD080528

+
+		Number of ctl_clk required to meet (> 150ns) timing requirements during DRAM DQ VREF training
+		PSU_DDR_PHY_VTCR0_TVREF                                                         0x7
+
+		DRM DQ VREF training Enable
+		PSU_DDR_PHY_VTCR0_DVEN                                                          0x1
+
+		Per Device Addressability Enable
+		PSU_DDR_PHY_VTCR0_PDAEN                                                         0x1
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR0_RESERVED_26                                                   0x0
+
+		VREF Word Count
+		PSU_DDR_PHY_VTCR0_VWCR                                                          0x4
+
+		DRAM DQ VREF step size used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVSS                                                          0x0
+
+		Maximum VREF limit value used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVMAX                                                         0x32
+
+		Minimum VREF limit value used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVMIN                                                         0x0
+
+		Initial DRAM DQ VREF value used during DRAM VREF training
+		PSU_DDR_PHY_VTCR0_DVINIT                                                        0x19
+
+		VREF Training Control Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080528, 0xFFFFFFFFU ,0xF9032019U)  
+		RegMask = (DDR_PHY_VTCR0_TVREF_MASK | DDR_PHY_VTCR0_DVEN_MASK | DDR_PHY_VTCR0_PDAEN_MASK | DDR_PHY_VTCR0_RESERVED_26_MASK | DDR_PHY_VTCR0_VWCR_MASK | DDR_PHY_VTCR0_DVSS_MASK | DDR_PHY_VTCR0_DVMAX_MASK | DDR_PHY_VTCR0_DVMIN_MASK | DDR_PHY_VTCR0_DVINIT_MASK |  0 );
+
+		RegVal = ((0x00000007U << DDR_PHY_VTCR0_TVREF_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR0_DVEN_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR0_PDAEN_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR0_RESERVED_26_SHIFT
+			| 0x00000004U << DDR_PHY_VTCR0_VWCR_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR0_DVSS_SHIFT
+			| 0x00000032U << DDR_PHY_VTCR0_DVMAX_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR0_DVMIN_SHIFT
+			| 0x00000019U << DDR_PHY_VTCR0_DVINIT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_VTCR0_OFFSET ,0xFFFFFFFFU ,0xF9032019U);
+	/*############################################################################################################################ */
+
+		/*Register : VTCR1 @ 0XFD08052C

+
+		Host VREF step size used during VREF training. The register value of N indicates step size of (N+1)
+		PSU_DDR_PHY_VTCR1_HVSS                                                          0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR1_RESERVED_27                                                   0x0
+
+		Maximum VREF limit value used during DRAM VREF training.
+		PSU_DDR_PHY_VTCR1_HVMAX                                                         0x7f
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR1_RESERVED_19                                                   0x0
+
+		Minimum VREF limit value used during DRAM VREF training.
+		PSU_DDR_PHY_VTCR1_HVMIN                                                         0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_VTCR1_RESERVED_11                                                   0x0
+
+		Static Host Vref Rank Value
+		PSU_DDR_PHY_VTCR1_SHRNK                                                         0x0
+
+		Static Host Vref Rank Enable
+		PSU_DDR_PHY_VTCR1_SHREN                                                         0x1
+
+		Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training
+		PSU_DDR_PHY_VTCR1_TVREFIO                                                       0x4
+
+		Eye LCDL Offset value for VREF training
+		PSU_DDR_PHY_VTCR1_EOFF                                                          0x1
+
+		Number of LCDL Eye points for which VREF training is repeated
+		PSU_DDR_PHY_VTCR1_ENUM                                                          0x1
+
+		HOST (IO) internal VREF training Enable
+		PSU_DDR_PHY_VTCR1_HVEN                                                          0x1
+
+		Host IO Type Control
+		PSU_DDR_PHY_VTCR1_HVIO                                                          0x1
+
+		VREF Training Control Register 1
+		(OFFSET, MASK, VALUE)      (0XFD08052C, 0xFFFFFFFFU ,0x07F0018FU)  
+		RegMask = (DDR_PHY_VTCR1_HVSS_MASK | DDR_PHY_VTCR1_RESERVED_27_MASK | DDR_PHY_VTCR1_HVMAX_MASK | DDR_PHY_VTCR1_RESERVED_19_MASK | DDR_PHY_VTCR1_HVMIN_MASK | DDR_PHY_VTCR1_RESERVED_11_MASK | DDR_PHY_VTCR1_SHRNK_MASK | DDR_PHY_VTCR1_SHREN_MASK | DDR_PHY_VTCR1_TVREFIO_MASK | DDR_PHY_VTCR1_EOFF_MASK | DDR_PHY_VTCR1_ENUM_MASK | DDR_PHY_VTCR1_HVEN_MASK | DDR_PHY_VTCR1_HVIO_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_VTCR1_HVSS_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_27_SHIFT
+			| 0x0000007FU << DDR_PHY_VTCR1_HVMAX_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_19_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_HVMIN_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_11_SHIFT
+			| 0x00000000U << DDR_PHY_VTCR1_SHRNK_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_SHREN_SHIFT
+			| 0x00000004U << DDR_PHY_VTCR1_TVREFIO_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_EOFF_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_ENUM_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_HVEN_SHIFT
+			| 0x00000001U << DDR_PHY_VTCR1_HVIO_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_VTCR1_OFFSET ,0xFFFFFFFFU ,0x07F0018FU);
+	/*############################################################################################################################ */
+
+		/*Register : ACBDLR6 @ 0XFD080558

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_31_30                                              0x0
+
+		Delay select for the BDL on Address A[3].
+		PSU_DDR_PHY_ACBDLR6_A03BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_23_22                                              0x0
+
+		Delay select for the BDL on Address A[2].
+		PSU_DDR_PHY_ACBDLR6_A02BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_15_14                                              0x0
+
+		Delay select for the BDL on Address A[1].
+		PSU_DDR_PHY_ACBDLR6_A01BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR6_RESERVED_7_6                                                0x0
+
+		Delay select for the BDL on Address A[0].
+		PSU_DDR_PHY_ACBDLR6_A00BD                                                       0x0
+
+		AC Bit Delay Line Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080558, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_ACBDLR6_RESERVED_31_30_MASK | DDR_PHY_ACBDLR6_A03BD_MASK | DDR_PHY_ACBDLR6_RESERVED_23_22_MASK | DDR_PHY_ACBDLR6_A02BD_MASK | DDR_PHY_ACBDLR6_RESERVED_15_14_MASK | DDR_PHY_ACBDLR6_A01BD_MASK | DDR_PHY_ACBDLR6_RESERVED_7_6_MASK | DDR_PHY_ACBDLR6_A00BD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A03BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A02BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A01BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR6_A00BD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACBDLR6_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ACBDLR7 @ 0XFD08055C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_31_30                                              0x0
+
+		Delay select for the BDL on Address A[7].
+		PSU_DDR_PHY_ACBDLR7_A07BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_23_22                                              0x0
+
+		Delay select for the BDL on Address A[6].
+		PSU_DDR_PHY_ACBDLR7_A06BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_15_14                                              0x0
+
+		Delay select for the BDL on Address A[5].
+		PSU_DDR_PHY_ACBDLR7_A05BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR7_RESERVED_7_6                                                0x0
+
+		Delay select for the BDL on Address A[4].
+		PSU_DDR_PHY_ACBDLR7_A04BD                                                       0x0
+
+		AC Bit Delay Line Register 7
+		(OFFSET, MASK, VALUE)      (0XFD08055C, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_ACBDLR7_RESERVED_31_30_MASK | DDR_PHY_ACBDLR7_A07BD_MASK | DDR_PHY_ACBDLR7_RESERVED_23_22_MASK | DDR_PHY_ACBDLR7_A06BD_MASK | DDR_PHY_ACBDLR7_RESERVED_15_14_MASK | DDR_PHY_ACBDLR7_A05BD_MASK | DDR_PHY_ACBDLR7_RESERVED_7_6_MASK | DDR_PHY_ACBDLR7_A04BD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACBDLR7_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A07BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_23_22_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A06BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A05BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_7_6_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR7_A04BD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACBDLR7_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ACBDLR8 @ 0XFD080560

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_31_30                                              0x0
+
+		Delay select for the BDL on Address A[11].
+		PSU_DDR_PHY_ACBDLR8_A11BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_23_22                                              0x0
+
+		Delay select for the BDL on Address A[10].
+		PSU_DDR_PHY_ACBDLR8_A10BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_15_14                                              0x0
+
+		Delay select for the BDL on Address A[9].
+		PSU_DDR_PHY_ACBDLR8_A09BD                                                       0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ACBDLR8_RESERVED_7_6                                                0x0
+
+		Delay select for the BDL on Address A[8].
+		PSU_DDR_PHY_ACBDLR8_A08BD                                                       0x0
+
+		AC Bit Delay Line Register 8
+		(OFFSET, MASK, VALUE)      (0XFD080560, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_ACBDLR8_RESERVED_31_30_MASK | DDR_PHY_ACBDLR8_A11BD_MASK | DDR_PHY_ACBDLR8_RESERVED_23_22_MASK | DDR_PHY_ACBDLR8_A10BD_MASK | DDR_PHY_ACBDLR8_RESERVED_15_14_MASK | DDR_PHY_ACBDLR8_A09BD_MASK | DDR_PHY_ACBDLR8_RESERVED_7_6_MASK | DDR_PHY_ACBDLR8_A08BD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ACBDLR8_RESERVED_31_30_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A11BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_23_22_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A10BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_15_14_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A09BD_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_7_6_SHIFT
+			| 0x00000000U << DDR_PHY_ACBDLR8_A08BD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ACBDLR8_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQCR @ 0XFD080680

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_ZQCR_RESERVED_31_26                                                 0x0
+
+		ZQ VREF Range
+		PSU_DDR_PHY_ZQCR_ZQREFISELRANGE                                                 0x0
+
+		Programmable Wait for Frequency B
+		PSU_DDR_PHY_ZQCR_PGWAIT_FRQB                                                    0x11
+
+		Programmable Wait for Frequency A
+		PSU_DDR_PHY_ZQCR_PGWAIT_FRQA                                                    0x11
+
+		ZQ VREF Pad Enable
+		PSU_DDR_PHY_ZQCR_ZQREFPEN                                                       0x0
+
+		ZQ Internal VREF Enable
+		PSU_DDR_PHY_ZQCR_ZQREFIEN                                                       0x1
+
+		Choice of termination mode
+		PSU_DDR_PHY_ZQCR_ODT_MODE                                                       0x1
+
+		Force ZCAL VT update
+		PSU_DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE                                           0x0
+
+		IO VT Drift Limit
+		PSU_DDR_PHY_ZQCR_IODLMT                                                         0x2
+
+		Averaging algorithm enable, if set, enables averaging algorithm
+		PSU_DDR_PHY_ZQCR_AVGEN                                                          0x1
+
+		Maximum number of averaging rounds to be used by averaging algorithm
+		PSU_DDR_PHY_ZQCR_AVGMAX                                                         0x2
+
+		ZQ Calibration Type
+		PSU_DDR_PHY_ZQCR_ZCALT                                                          0x0
+
+		ZQ Power Down
+		PSU_DDR_PHY_ZQCR_ZQPD                                                           0x0
+
+		ZQ Impedance Control Register
+		(OFFSET, MASK, VALUE)      (0XFD080680, 0xFFFFFFFFU ,0x008A2A58U)  
+		RegMask = (DDR_PHY_ZQCR_RESERVED_31_26_MASK | DDR_PHY_ZQCR_ZQREFISELRANGE_MASK | DDR_PHY_ZQCR_PGWAIT_FRQB_MASK | DDR_PHY_ZQCR_PGWAIT_FRQA_MASK | DDR_PHY_ZQCR_ZQREFPEN_MASK | DDR_PHY_ZQCR_ZQREFIEN_MASK | DDR_PHY_ZQCR_ODT_MODE_MASK | DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_MASK | DDR_PHY_ZQCR_IODLMT_MASK | DDR_PHY_ZQCR_AVGEN_MASK | DDR_PHY_ZQCR_AVGMAX_MASK | DDR_PHY_ZQCR_ZCALT_MASK | DDR_PHY_ZQCR_ZQPD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQCR_RESERVED_31_26_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZQREFISELRANGE_SHIFT
+			| 0x00000011U << DDR_PHY_ZQCR_PGWAIT_FRQB_SHIFT
+			| 0x00000011U << DDR_PHY_ZQCR_PGWAIT_FRQA_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZQREFPEN_SHIFT
+			| 0x00000001U << DDR_PHY_ZQCR_ZQREFIEN_SHIFT
+			| 0x00000001U << DDR_PHY_ZQCR_ODT_MODE_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_SHIFT
+			| 0x00000002U << DDR_PHY_ZQCR_IODLMT_SHIFT
+			| 0x00000001U << DDR_PHY_ZQCR_AVGEN_SHIFT
+			| 0x00000002U << DDR_PHY_ZQCR_AVGMAX_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZCALT_SHIFT
+			| 0x00000000U << DDR_PHY_ZQCR_ZQPD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQCR_OFFSET ,0xFFFFFFFFU ,0x008A2A58U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ0PR0 @ 0XFD080684

+
+		Pull-down drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PD_DRV_ZDEN                                                  0x0
+
+		Pull-up drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PU_DRV_ZDEN                                                  0x0
+
+		Pull-down termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PD_ODT_ZDEN                                                  0x0
+
+		Pull-up termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ0PR0_PU_ODT_ZDEN                                                  0x0
+
+		Calibration segment bypass
+		PSU_DDR_PHY_ZQ0PR0_ZSEGBYP                                                      0x0
+
+		VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
+		PSU_DDR_PHY_ZQ0PR0_ZLE_MODE                                                     0x0
+
+		Termination adjustment
+		PSU_DDR_PHY_ZQ0PR0_ODT_ADJUST                                                   0x0
+
+		Pulldown drive strength adjustment
+		PSU_DDR_PHY_ZQ0PR0_PD_DRV_ADJUST                                                0x0
+
+		Pullup drive strength adjustment
+		PSU_DDR_PHY_ZQ0PR0_PU_DRV_ADJUST                                                0x0
+
+		DRAM Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT                                               0x7
+
+		HOST Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT                                               0x7
+
+		Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD                                            0xd
+
+		Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU                                            0xd
+
+		ZQ n Impedance Control Program Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080684, 0xFFFFFFFFU ,0x000077DDU)  
+		RegMask = (DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_MASK | DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_MASK | DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_MASK | DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_MASK | DDR_PHY_ZQ0PR0_ZSEGBYP_MASK | DDR_PHY_ZQ0PR0_ZLE_MODE_MASK | DDR_PHY_ZQ0PR0_ODT_ADJUST_MASK | DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_MASK | DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_MASK | DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_MASK | DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_MASK | DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_MASK | DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_ZSEGBYP_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_ZLE_MODE_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_ODT_ADJUST_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_SHIFT
+			| 0x00000007U << DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_SHIFT
+			| 0x00000007U << DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_SHIFT
+			| 0x0000000DU << DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_SHIFT
+			| 0x0000000DU << DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ0PR0_OFFSET ,0xFFFFFFFFU ,0x000077DDU);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ0OR0 @ 0XFD080694

+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR0_RESERVED_31_26                                               0x0
+
+		Override value for the pull-up output impedance
+		PSU_DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD                                            0x1e1
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR0_RESERVED_15_10                                               0x0
+
+		Override value for the pull-down output impedance
+		PSU_DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD                                            0x210
+
+		ZQ n Impedance Control Override Data Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080694, 0xFFFFFFFFU ,0x01E10210U)  
+		RegMask = (DDR_PHY_ZQ0OR0_RESERVED_31_26_MASK | DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_MASK | DDR_PHY_ZQ0OR0_RESERVED_15_10_MASK | DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ0OR0_RESERVED_31_26_SHIFT
+			| 0x000001E1U << DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0OR0_RESERVED_15_10_SHIFT
+			| 0x00000210U << DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ0OR0_OFFSET ,0xFFFFFFFFU ,0x01E10210U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ0OR1 @ 0XFD080698

+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR1_RESERVED_31_26                                               0x0
+
+		Override value for the pull-up termination
+		PSU_DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD                                            0x1e1
+
+		Reserved. Return zeros on reads.
+		PSU_DDR_PHY_ZQ0OR1_RESERVED_15_10                                               0x0
+
+		Override value for the pull-down termination
+		PSU_DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD                                            0x0
+
+		ZQ n Impedance Control Override Data Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080698, 0xFFFFFFFFU ,0x01E10000U)  
+		RegMask = (DDR_PHY_ZQ0OR1_RESERVED_31_26_MASK | DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_MASK | DDR_PHY_ZQ0OR1_RESERVED_15_10_MASK | DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ0OR1_RESERVED_31_26_SHIFT
+			| 0x000001E1U << DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0OR1_RESERVED_15_10_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ0OR1_OFFSET ,0xFFFFFFFFU ,0x01E10000U);
+	/*############################################################################################################################ */
+
+		/*Register : ZQ1PR0 @ 0XFD0806A4

+
+		Pull-down drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PD_DRV_ZDEN                                                  0x0
+
+		Pull-up drive strength ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PU_DRV_ZDEN                                                  0x0
+
+		Pull-down termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PD_ODT_ZDEN                                                  0x0
+
+		Pull-up termination ZCTRL over-ride enable
+		PSU_DDR_PHY_ZQ1PR0_PU_ODT_ZDEN                                                  0x0
+
+		Calibration segment bypass
+		PSU_DDR_PHY_ZQ1PR0_ZSEGBYP                                                      0x0
+
+		VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
+		PSU_DDR_PHY_ZQ1PR0_ZLE_MODE                                                     0x0
+
+		Termination adjustment
+		PSU_DDR_PHY_ZQ1PR0_ODT_ADJUST                                                   0x0
+
+		Pulldown drive strength adjustment
+		PSU_DDR_PHY_ZQ1PR0_PD_DRV_ADJUST                                                0x1
+
+		Pullup drive strength adjustment
+		PSU_DDR_PHY_ZQ1PR0_PU_DRV_ADJUST                                                0x0
+
+		DRAM Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT                                               0x7
+
+		HOST Impedance Divide Ratio
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT                                               0xb
+
+		Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD                                            0xd
+
+		Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
+		PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU                                            0xb
+
+		ZQ n Impedance Control Program Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0806A4, 0xFFFFFFFFU ,0x00087BDBU)  
+		RegMask = (DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_MASK | DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_MASK | DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_MASK | DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_MASK | DDR_PHY_ZQ1PR0_ZSEGBYP_MASK | DDR_PHY_ZQ1PR0_ZLE_MODE_MASK | DDR_PHY_ZQ1PR0_ODT_ADJUST_MASK | DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_MASK | DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_MASK | DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_MASK | DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_MASK | DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_MASK | DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_ZSEGBYP_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_ZLE_MODE_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_ODT_ADJUST_SHIFT
+			| 0x00000001U << DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_SHIFT
+			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_SHIFT
+			| 0x00000007U << DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_SHIFT
+			| 0x0000000BU << DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_SHIFT
+			| 0x0000000DU << DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_SHIFT
+			| 0x0000000BU << DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_ZQ1PR0_OFFSET ,0xFFFFFFFFU ,0x00087BDBU);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR0 @ 0XFD080700

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX0GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX0GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX0GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX0GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX0GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX0GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX0GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX0GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX0GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX0GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX0GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX0GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX0GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX0GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080700, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX0GCR0_CALBYP_MASK | DDR_PHY_DX0GCR0_MDLEN_MASK | DDR_PHY_DX0GCR0_CODTSHFT_MASK | DDR_PHY_DX0GCR0_DQSDCC_MASK | DDR_PHY_DX0GCR0_RDDLY_MASK | DDR_PHY_DX0GCR0_RESERVED_19_14_MASK | DDR_PHY_DX0GCR0_DQSNSEPDR_MASK | DDR_PHY_DX0GCR0_DQSSEPDR_MASK | DDR_PHY_DX0GCR0_RTTOAL_MASK | DDR_PHY_DX0GCR0_RTTOH_MASK | DDR_PHY_DX0GCR0_CPDRSHFT_MASK | DDR_PHY_DX0GCR0_DQSRPD_MASK | DDR_PHY_DX0GCR0_DQSGPDR_MASK | DDR_PHY_DX0GCR0_RESERVED_4_MASK | DDR_PHY_DX0GCR0_DQSGODT_MASK | DDR_PHY_DX0GCR0_DQSGOE_MASK | DDR_PHY_DX0GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX0GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX0GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR4 @ 0XFD080710

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX0GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX0GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX0GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX0GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX0GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX0GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX0GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX0GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX0GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX0GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080710, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX0GCR4_RESERVED_31_29_MASK | DDR_PHY_DX0GCR4_DXREFPEN_MASK | DDR_PHY_DX0GCR4_DXREFEEN_MASK | DDR_PHY_DX0GCR4_DXREFSEN_MASK | DDR_PHY_DX0GCR4_RESERVED_24_MASK | DDR_PHY_DX0GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX0GCR4_DXREFESEL_MASK | DDR_PHY_DX0GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX0GCR4_DXREFSSEL_MASK | DDR_PHY_DX0GCR4_RESERVED_7_6_MASK | DDR_PHY_DX0GCR4_DXREFIEN_MASK | DDR_PHY_DX0GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX0GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX0GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX0GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX0GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR5 @ 0XFD080714

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX0GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080714, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX0GCR5_RESERVED_31_MASK | DDR_PHY_DX0GCR5_DXREFISELR3_MASK | DDR_PHY_DX0GCR5_RESERVED_23_MASK | DDR_PHY_DX0GCR5_DXREFISELR2_MASK | DDR_PHY_DX0GCR5_RESERVED_15_MASK | DDR_PHY_DX0GCR5_DXREFISELR1_MASK | DDR_PHY_DX0GCR5_RESERVED_7_MASK | DDR_PHY_DX0GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GCR6 @ 0XFD080718

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX0GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX0GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080718, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX0GCR6_RESERVED_31_30_MASK | DDR_PHY_DX0GCR6_DXDQVREFR3_MASK | DDR_PHY_DX0GCR6_RESERVED_23_22_MASK | DDR_PHY_DX0GCR6_DXDQVREFR2_MASK | DDR_PHY_DX0GCR6_RESERVED_15_14_MASK | DDR_PHY_DX0GCR6_DXDQVREFR1_MASK | DDR_PHY_DX0GCR6_RESERVED_7_6_MASK | DDR_PHY_DX0GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX0GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX0GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX0GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX0LCDLR2 @ 0XFD080788

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX0LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX0LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080788, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX0LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX0LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX0LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX0LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX0LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX0GTR0 @ 0XFD0807C0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX0GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX0GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX0GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX0GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0807C0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX0GTR0_RESERVED_31_24_MASK | DDR_PHY_DX0GTR0_WDQSL_MASK | DDR_PHY_DX0GTR0_RESERVED_23_20_MASK | DDR_PHY_DX0GTR0_WLSL_MASK | DDR_PHY_DX0GTR0_RESERVED_15_13_MASK | DDR_PHY_DX0GTR0_RESERVED_12_8_MASK | DDR_PHY_DX0GTR0_RESERVED_7_5_MASK | DDR_PHY_DX0GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX0GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX0GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX0GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX0GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR0 @ 0XFD080800

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX1GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX1GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX1GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX1GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX1GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX1GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX1GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX1GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX1GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX1GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX1GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX1GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX1GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX1GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080800, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX1GCR0_CALBYP_MASK | DDR_PHY_DX1GCR0_MDLEN_MASK | DDR_PHY_DX1GCR0_CODTSHFT_MASK | DDR_PHY_DX1GCR0_DQSDCC_MASK | DDR_PHY_DX1GCR0_RDDLY_MASK | DDR_PHY_DX1GCR0_RESERVED_19_14_MASK | DDR_PHY_DX1GCR0_DQSNSEPDR_MASK | DDR_PHY_DX1GCR0_DQSSEPDR_MASK | DDR_PHY_DX1GCR0_RTTOAL_MASK | DDR_PHY_DX1GCR0_RTTOH_MASK | DDR_PHY_DX1GCR0_CPDRSHFT_MASK | DDR_PHY_DX1GCR0_DQSRPD_MASK | DDR_PHY_DX1GCR0_DQSGPDR_MASK | DDR_PHY_DX1GCR0_RESERVED_4_MASK | DDR_PHY_DX1GCR0_DQSGODT_MASK | DDR_PHY_DX1GCR0_DQSGOE_MASK | DDR_PHY_DX1GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX1GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX1GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR4 @ 0XFD080810

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX1GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX1GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX1GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX1GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX1GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX1GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX1GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX1GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX1GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX1GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080810, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX1GCR4_RESERVED_31_29_MASK | DDR_PHY_DX1GCR4_DXREFPEN_MASK | DDR_PHY_DX1GCR4_DXREFEEN_MASK | DDR_PHY_DX1GCR4_DXREFSEN_MASK | DDR_PHY_DX1GCR4_RESERVED_24_MASK | DDR_PHY_DX1GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX1GCR4_DXREFESEL_MASK | DDR_PHY_DX1GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX1GCR4_DXREFSSEL_MASK | DDR_PHY_DX1GCR4_RESERVED_7_6_MASK | DDR_PHY_DX1GCR4_DXREFIEN_MASK | DDR_PHY_DX1GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX1GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX1GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX1GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX1GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR5 @ 0XFD080814

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX1GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080814, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX1GCR5_RESERVED_31_MASK | DDR_PHY_DX1GCR5_DXREFISELR3_MASK | DDR_PHY_DX1GCR5_RESERVED_23_MASK | DDR_PHY_DX1GCR5_DXREFISELR2_MASK | DDR_PHY_DX1GCR5_RESERVED_15_MASK | DDR_PHY_DX1GCR5_DXREFISELR1_MASK | DDR_PHY_DX1GCR5_RESERVED_7_MASK | DDR_PHY_DX1GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GCR6 @ 0XFD080818

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX1GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX1GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080818, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX1GCR6_RESERVED_31_30_MASK | DDR_PHY_DX1GCR6_DXDQVREFR3_MASK | DDR_PHY_DX1GCR6_RESERVED_23_22_MASK | DDR_PHY_DX1GCR6_DXDQVREFR2_MASK | DDR_PHY_DX1GCR6_RESERVED_15_14_MASK | DDR_PHY_DX1GCR6_DXDQVREFR1_MASK | DDR_PHY_DX1GCR6_RESERVED_7_6_MASK | DDR_PHY_DX1GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX1GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX1GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX1GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX1LCDLR2 @ 0XFD080888

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX1LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX1LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080888, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX1LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX1LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX1LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX1LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX1LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX1GTR0 @ 0XFD0808C0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX1GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX1GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX1GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX1GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0808C0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX1GTR0_RESERVED_31_24_MASK | DDR_PHY_DX1GTR0_WDQSL_MASK | DDR_PHY_DX1GTR0_RESERVED_23_20_MASK | DDR_PHY_DX1GTR0_WLSL_MASK | DDR_PHY_DX1GTR0_RESERVED_15_13_MASK | DDR_PHY_DX1GTR0_RESERVED_12_8_MASK | DDR_PHY_DX1GTR0_RESERVED_7_5_MASK | DDR_PHY_DX1GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX1GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX1GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX1GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX1GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR0 @ 0XFD080900

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX2GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX2GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX2GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX2GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX2GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX2GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX2GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX2GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX2GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX2GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX2GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX2GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX2GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX2GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080900, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX2GCR0_CALBYP_MASK | DDR_PHY_DX2GCR0_MDLEN_MASK | DDR_PHY_DX2GCR0_CODTSHFT_MASK | DDR_PHY_DX2GCR0_DQSDCC_MASK | DDR_PHY_DX2GCR0_RDDLY_MASK | DDR_PHY_DX2GCR0_RESERVED_19_14_MASK | DDR_PHY_DX2GCR0_DQSNSEPDR_MASK | DDR_PHY_DX2GCR0_DQSSEPDR_MASK | DDR_PHY_DX2GCR0_RTTOAL_MASK | DDR_PHY_DX2GCR0_RTTOH_MASK | DDR_PHY_DX2GCR0_CPDRSHFT_MASK | DDR_PHY_DX2GCR0_DQSRPD_MASK | DDR_PHY_DX2GCR0_DQSGPDR_MASK | DDR_PHY_DX2GCR0_RESERVED_4_MASK | DDR_PHY_DX2GCR0_DQSGODT_MASK | DDR_PHY_DX2GCR0_DQSGOE_MASK | DDR_PHY_DX2GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX2GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX2GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR1 @ 0XFD080904

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX2GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX2GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX2GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX2GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX2GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX2GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX2GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX2GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX2GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX2GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080904, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX2GCR1_DXPDRMODE_MASK | DDR_PHY_DX2GCR1_RESERVED_15_MASK | DDR_PHY_DX2GCR1_QSNSEL_MASK | DDR_PHY_DX2GCR1_QSSEL_MASK | DDR_PHY_DX2GCR1_OEEN_MASK | DDR_PHY_DX2GCR1_PDREN_MASK | DDR_PHY_DX2GCR1_TEEN_MASK | DDR_PHY_DX2GCR1_DSEN_MASK | DDR_PHY_DX2GCR1_DMEN_MASK | DDR_PHY_DX2GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX2GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR4 @ 0XFD080910

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX2GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX2GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX2GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX2GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX2GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX2GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX2GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX2GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX2GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX2GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080910, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX2GCR4_RESERVED_31_29_MASK | DDR_PHY_DX2GCR4_DXREFPEN_MASK | DDR_PHY_DX2GCR4_DXREFEEN_MASK | DDR_PHY_DX2GCR4_DXREFSEN_MASK | DDR_PHY_DX2GCR4_RESERVED_24_MASK | DDR_PHY_DX2GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX2GCR4_DXREFESEL_MASK | DDR_PHY_DX2GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX2GCR4_DXREFSSEL_MASK | DDR_PHY_DX2GCR4_RESERVED_7_6_MASK | DDR_PHY_DX2GCR4_DXREFIEN_MASK | DDR_PHY_DX2GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX2GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX2GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX2GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX2GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR5 @ 0XFD080914

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX2GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080914, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX2GCR5_RESERVED_31_MASK | DDR_PHY_DX2GCR5_DXREFISELR3_MASK | DDR_PHY_DX2GCR5_RESERVED_23_MASK | DDR_PHY_DX2GCR5_DXREFISELR2_MASK | DDR_PHY_DX2GCR5_RESERVED_15_MASK | DDR_PHY_DX2GCR5_DXREFISELR1_MASK | DDR_PHY_DX2GCR5_RESERVED_7_MASK | DDR_PHY_DX2GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GCR6 @ 0XFD080918

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX2GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX2GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080918, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX2GCR6_RESERVED_31_30_MASK | DDR_PHY_DX2GCR6_DXDQVREFR3_MASK | DDR_PHY_DX2GCR6_RESERVED_23_22_MASK | DDR_PHY_DX2GCR6_DXDQVREFR2_MASK | DDR_PHY_DX2GCR6_RESERVED_15_14_MASK | DDR_PHY_DX2GCR6_DXDQVREFR1_MASK | DDR_PHY_DX2GCR6_RESERVED_7_6_MASK | DDR_PHY_DX2GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX2GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX2GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX2GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX2LCDLR2 @ 0XFD080988

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX2LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX2LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080988, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX2LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX2LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX2LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX2LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX2LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX2GTR0 @ 0XFD0809C0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX2GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX2GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX2GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX2GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD0809C0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX2GTR0_RESERVED_31_24_MASK | DDR_PHY_DX2GTR0_WDQSL_MASK | DDR_PHY_DX2GTR0_RESERVED_23_20_MASK | DDR_PHY_DX2GTR0_WLSL_MASK | DDR_PHY_DX2GTR0_RESERVED_15_13_MASK | DDR_PHY_DX2GTR0_RESERVED_12_8_MASK | DDR_PHY_DX2GTR0_RESERVED_7_5_MASK | DDR_PHY_DX2GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX2GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX2GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX2GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX2GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR0 @ 0XFD080A00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX3GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX3GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX3GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX3GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX3GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX3GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX3GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX3GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX3GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX3GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX3GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX3GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX3GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX3GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080A00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX3GCR0_CALBYP_MASK | DDR_PHY_DX3GCR0_MDLEN_MASK | DDR_PHY_DX3GCR0_CODTSHFT_MASK | DDR_PHY_DX3GCR0_DQSDCC_MASK | DDR_PHY_DX3GCR0_RDDLY_MASK | DDR_PHY_DX3GCR0_RESERVED_19_14_MASK | DDR_PHY_DX3GCR0_DQSNSEPDR_MASK | DDR_PHY_DX3GCR0_DQSSEPDR_MASK | DDR_PHY_DX3GCR0_RTTOAL_MASK | DDR_PHY_DX3GCR0_RTTOH_MASK | DDR_PHY_DX3GCR0_CPDRSHFT_MASK | DDR_PHY_DX3GCR0_DQSRPD_MASK | DDR_PHY_DX3GCR0_DQSGPDR_MASK | DDR_PHY_DX3GCR0_RESERVED_4_MASK | DDR_PHY_DX3GCR0_DQSGODT_MASK | DDR_PHY_DX3GCR0_DQSGOE_MASK | DDR_PHY_DX3GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX3GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX3GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR1 @ 0XFD080A04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX3GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX3GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX3GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX3GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX3GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX3GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX3GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX3GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX3GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX3GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080A04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX3GCR1_DXPDRMODE_MASK | DDR_PHY_DX3GCR1_RESERVED_15_MASK | DDR_PHY_DX3GCR1_QSNSEL_MASK | DDR_PHY_DX3GCR1_QSSEL_MASK | DDR_PHY_DX3GCR1_OEEN_MASK | DDR_PHY_DX3GCR1_PDREN_MASK | DDR_PHY_DX3GCR1_TEEN_MASK | DDR_PHY_DX3GCR1_DSEN_MASK | DDR_PHY_DX3GCR1_DMEN_MASK | DDR_PHY_DX3GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX3GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR4 @ 0XFD080A10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX3GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX3GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX3GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX3GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX3GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX3GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX3GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX3GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX3GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX3GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080A10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX3GCR4_RESERVED_31_29_MASK | DDR_PHY_DX3GCR4_DXREFPEN_MASK | DDR_PHY_DX3GCR4_DXREFEEN_MASK | DDR_PHY_DX3GCR4_DXREFSEN_MASK | DDR_PHY_DX3GCR4_RESERVED_24_MASK | DDR_PHY_DX3GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX3GCR4_DXREFESEL_MASK | DDR_PHY_DX3GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX3GCR4_DXREFSSEL_MASK | DDR_PHY_DX3GCR4_RESERVED_7_6_MASK | DDR_PHY_DX3GCR4_DXREFIEN_MASK | DDR_PHY_DX3GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX3GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX3GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX3GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX3GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR5 @ 0XFD080A14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX3GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080A14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX3GCR5_RESERVED_31_MASK | DDR_PHY_DX3GCR5_DXREFISELR3_MASK | DDR_PHY_DX3GCR5_RESERVED_23_MASK | DDR_PHY_DX3GCR5_DXREFISELR2_MASK | DDR_PHY_DX3GCR5_RESERVED_15_MASK | DDR_PHY_DX3GCR5_DXREFISELR1_MASK | DDR_PHY_DX3GCR5_RESERVED_7_MASK | DDR_PHY_DX3GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GCR6 @ 0XFD080A18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX3GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX3GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080A18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX3GCR6_RESERVED_31_30_MASK | DDR_PHY_DX3GCR6_DXDQVREFR3_MASK | DDR_PHY_DX3GCR6_RESERVED_23_22_MASK | DDR_PHY_DX3GCR6_DXDQVREFR2_MASK | DDR_PHY_DX3GCR6_RESERVED_15_14_MASK | DDR_PHY_DX3GCR6_DXDQVREFR1_MASK | DDR_PHY_DX3GCR6_RESERVED_7_6_MASK | DDR_PHY_DX3GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX3GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX3GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX3GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX3LCDLR2 @ 0XFD080A88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX3LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX3LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080A88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX3LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX3LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX3LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX3LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX3LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX3GTR0 @ 0XFD080AC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX3GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX3GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX3GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX3GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080AC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX3GTR0_RESERVED_31_24_MASK | DDR_PHY_DX3GTR0_WDQSL_MASK | DDR_PHY_DX3GTR0_RESERVED_23_20_MASK | DDR_PHY_DX3GTR0_WLSL_MASK | DDR_PHY_DX3GTR0_RESERVED_15_13_MASK | DDR_PHY_DX3GTR0_RESERVED_12_8_MASK | DDR_PHY_DX3GTR0_RESERVED_7_5_MASK | DDR_PHY_DX3GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX3GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX3GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX3GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX3GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR0 @ 0XFD080B00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX4GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX4GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX4GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX4GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX4GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX4GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX4GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX4GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX4GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX4GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX4GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX4GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX4GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX4GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080B00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX4GCR0_CALBYP_MASK | DDR_PHY_DX4GCR0_MDLEN_MASK | DDR_PHY_DX4GCR0_CODTSHFT_MASK | DDR_PHY_DX4GCR0_DQSDCC_MASK | DDR_PHY_DX4GCR0_RDDLY_MASK | DDR_PHY_DX4GCR0_RESERVED_19_14_MASK | DDR_PHY_DX4GCR0_DQSNSEPDR_MASK | DDR_PHY_DX4GCR0_DQSSEPDR_MASK | DDR_PHY_DX4GCR0_RTTOAL_MASK | DDR_PHY_DX4GCR0_RTTOH_MASK | DDR_PHY_DX4GCR0_CPDRSHFT_MASK | DDR_PHY_DX4GCR0_DQSRPD_MASK | DDR_PHY_DX4GCR0_DQSGPDR_MASK | DDR_PHY_DX4GCR0_RESERVED_4_MASK | DDR_PHY_DX4GCR0_DQSGODT_MASK | DDR_PHY_DX4GCR0_DQSGOE_MASK | DDR_PHY_DX4GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX4GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX4GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR1 @ 0XFD080B04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX4GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX4GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX4GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX4GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX4GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX4GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX4GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX4GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX4GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX4GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080B04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX4GCR1_DXPDRMODE_MASK | DDR_PHY_DX4GCR1_RESERVED_15_MASK | DDR_PHY_DX4GCR1_QSNSEL_MASK | DDR_PHY_DX4GCR1_QSSEL_MASK | DDR_PHY_DX4GCR1_OEEN_MASK | DDR_PHY_DX4GCR1_PDREN_MASK | DDR_PHY_DX4GCR1_TEEN_MASK | DDR_PHY_DX4GCR1_DSEN_MASK | DDR_PHY_DX4GCR1_DMEN_MASK | DDR_PHY_DX4GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX4GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR4 @ 0XFD080B10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX4GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX4GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX4GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX4GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX4GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX4GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX4GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX4GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX4GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX4GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080B10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX4GCR4_RESERVED_31_29_MASK | DDR_PHY_DX4GCR4_DXREFPEN_MASK | DDR_PHY_DX4GCR4_DXREFEEN_MASK | DDR_PHY_DX4GCR4_DXREFSEN_MASK | DDR_PHY_DX4GCR4_RESERVED_24_MASK | DDR_PHY_DX4GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX4GCR4_DXREFESEL_MASK | DDR_PHY_DX4GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX4GCR4_DXREFSSEL_MASK | DDR_PHY_DX4GCR4_RESERVED_7_6_MASK | DDR_PHY_DX4GCR4_DXREFIEN_MASK | DDR_PHY_DX4GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX4GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX4GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX4GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX4GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR5 @ 0XFD080B14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX4GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080B14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX4GCR5_RESERVED_31_MASK | DDR_PHY_DX4GCR5_DXREFISELR3_MASK | DDR_PHY_DX4GCR5_RESERVED_23_MASK | DDR_PHY_DX4GCR5_DXREFISELR2_MASK | DDR_PHY_DX4GCR5_RESERVED_15_MASK | DDR_PHY_DX4GCR5_DXREFISELR1_MASK | DDR_PHY_DX4GCR5_RESERVED_7_MASK | DDR_PHY_DX4GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GCR6 @ 0XFD080B18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX4GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX4GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080B18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX4GCR6_RESERVED_31_30_MASK | DDR_PHY_DX4GCR6_DXDQVREFR3_MASK | DDR_PHY_DX4GCR6_RESERVED_23_22_MASK | DDR_PHY_DX4GCR6_DXDQVREFR2_MASK | DDR_PHY_DX4GCR6_RESERVED_15_14_MASK | DDR_PHY_DX4GCR6_DXDQVREFR1_MASK | DDR_PHY_DX4GCR6_RESERVED_7_6_MASK | DDR_PHY_DX4GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX4GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX4GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX4GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX4LCDLR2 @ 0XFD080B88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX4LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX4LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080B88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX4LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX4LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX4LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX4LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX4LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX4GTR0 @ 0XFD080BC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX4GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX4GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX4GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX4GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080BC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX4GTR0_RESERVED_31_24_MASK | DDR_PHY_DX4GTR0_WDQSL_MASK | DDR_PHY_DX4GTR0_RESERVED_23_20_MASK | DDR_PHY_DX4GTR0_WLSL_MASK | DDR_PHY_DX4GTR0_RESERVED_15_13_MASK | DDR_PHY_DX4GTR0_RESERVED_12_8_MASK | DDR_PHY_DX4GTR0_RESERVED_7_5_MASK | DDR_PHY_DX4GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX4GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX4GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX4GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX4GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR0 @ 0XFD080C00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX5GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX5GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX5GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX5GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX5GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX5GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX5GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX5GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX5GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX5GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX5GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX5GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX5GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX5GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080C00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX5GCR0_CALBYP_MASK | DDR_PHY_DX5GCR0_MDLEN_MASK | DDR_PHY_DX5GCR0_CODTSHFT_MASK | DDR_PHY_DX5GCR0_DQSDCC_MASK | DDR_PHY_DX5GCR0_RDDLY_MASK | DDR_PHY_DX5GCR0_RESERVED_19_14_MASK | DDR_PHY_DX5GCR0_DQSNSEPDR_MASK | DDR_PHY_DX5GCR0_DQSSEPDR_MASK | DDR_PHY_DX5GCR0_RTTOAL_MASK | DDR_PHY_DX5GCR0_RTTOH_MASK | DDR_PHY_DX5GCR0_CPDRSHFT_MASK | DDR_PHY_DX5GCR0_DQSRPD_MASK | DDR_PHY_DX5GCR0_DQSGPDR_MASK | DDR_PHY_DX5GCR0_RESERVED_4_MASK | DDR_PHY_DX5GCR0_DQSGODT_MASK | DDR_PHY_DX5GCR0_DQSGOE_MASK | DDR_PHY_DX5GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX5GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX5GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR1 @ 0XFD080C04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX5GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX5GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX5GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX5GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX5GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX5GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX5GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX5GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX5GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX5GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080C04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX5GCR1_DXPDRMODE_MASK | DDR_PHY_DX5GCR1_RESERVED_15_MASK | DDR_PHY_DX5GCR1_QSNSEL_MASK | DDR_PHY_DX5GCR1_QSSEL_MASK | DDR_PHY_DX5GCR1_OEEN_MASK | DDR_PHY_DX5GCR1_PDREN_MASK | DDR_PHY_DX5GCR1_TEEN_MASK | DDR_PHY_DX5GCR1_DSEN_MASK | DDR_PHY_DX5GCR1_DMEN_MASK | DDR_PHY_DX5GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX5GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR4 @ 0XFD080C10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX5GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX5GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX5GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX5GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX5GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX5GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX5GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX5GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX5GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX5GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080C10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX5GCR4_RESERVED_31_29_MASK | DDR_PHY_DX5GCR4_DXREFPEN_MASK | DDR_PHY_DX5GCR4_DXREFEEN_MASK | DDR_PHY_DX5GCR4_DXREFSEN_MASK | DDR_PHY_DX5GCR4_RESERVED_24_MASK | DDR_PHY_DX5GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX5GCR4_DXREFESEL_MASK | DDR_PHY_DX5GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX5GCR4_DXREFSSEL_MASK | DDR_PHY_DX5GCR4_RESERVED_7_6_MASK | DDR_PHY_DX5GCR4_DXREFIEN_MASK | DDR_PHY_DX5GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX5GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX5GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX5GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX5GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR5 @ 0XFD080C14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX5GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080C14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX5GCR5_RESERVED_31_MASK | DDR_PHY_DX5GCR5_DXREFISELR3_MASK | DDR_PHY_DX5GCR5_RESERVED_23_MASK | DDR_PHY_DX5GCR5_DXREFISELR2_MASK | DDR_PHY_DX5GCR5_RESERVED_15_MASK | DDR_PHY_DX5GCR5_DXREFISELR1_MASK | DDR_PHY_DX5GCR5_RESERVED_7_MASK | DDR_PHY_DX5GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GCR6 @ 0XFD080C18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX5GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX5GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080C18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX5GCR6_RESERVED_31_30_MASK | DDR_PHY_DX5GCR6_DXDQVREFR3_MASK | DDR_PHY_DX5GCR6_RESERVED_23_22_MASK | DDR_PHY_DX5GCR6_DXDQVREFR2_MASK | DDR_PHY_DX5GCR6_RESERVED_15_14_MASK | DDR_PHY_DX5GCR6_DXDQVREFR1_MASK | DDR_PHY_DX5GCR6_RESERVED_7_6_MASK | DDR_PHY_DX5GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX5GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX5GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX5GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX5LCDLR2 @ 0XFD080C88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX5LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX5LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080C88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX5LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX5LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX5LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX5LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX5LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX5GTR0 @ 0XFD080CC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX5GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX5GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX5GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX5GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080CC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX5GTR0_RESERVED_31_24_MASK | DDR_PHY_DX5GTR0_WDQSL_MASK | DDR_PHY_DX5GTR0_RESERVED_23_20_MASK | DDR_PHY_DX5GTR0_WLSL_MASK | DDR_PHY_DX5GTR0_RESERVED_15_13_MASK | DDR_PHY_DX5GTR0_RESERVED_12_8_MASK | DDR_PHY_DX5GTR0_RESERVED_7_5_MASK | DDR_PHY_DX5GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX5GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX5GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX5GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX5GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR0 @ 0XFD080D00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX6GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX6GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX6GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX6GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX6GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX6GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX6GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX6GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX6GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX6GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX6GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX6GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX6GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX6GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080D00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX6GCR0_CALBYP_MASK | DDR_PHY_DX6GCR0_MDLEN_MASK | DDR_PHY_DX6GCR0_CODTSHFT_MASK | DDR_PHY_DX6GCR0_DQSDCC_MASK | DDR_PHY_DX6GCR0_RDDLY_MASK | DDR_PHY_DX6GCR0_RESERVED_19_14_MASK | DDR_PHY_DX6GCR0_DQSNSEPDR_MASK | DDR_PHY_DX6GCR0_DQSSEPDR_MASK | DDR_PHY_DX6GCR0_RTTOAL_MASK | DDR_PHY_DX6GCR0_RTTOH_MASK | DDR_PHY_DX6GCR0_CPDRSHFT_MASK | DDR_PHY_DX6GCR0_DQSRPD_MASK | DDR_PHY_DX6GCR0_DQSGPDR_MASK | DDR_PHY_DX6GCR0_RESERVED_4_MASK | DDR_PHY_DX6GCR0_DQSGODT_MASK | DDR_PHY_DX6GCR0_DQSGOE_MASK | DDR_PHY_DX6GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX6GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX6GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR1 @ 0XFD080D04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX6GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX6GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX6GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX6GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX6GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX6GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX6GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX6GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX6GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX6GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080D04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX6GCR1_DXPDRMODE_MASK | DDR_PHY_DX6GCR1_RESERVED_15_MASK | DDR_PHY_DX6GCR1_QSNSEL_MASK | DDR_PHY_DX6GCR1_QSSEL_MASK | DDR_PHY_DX6GCR1_OEEN_MASK | DDR_PHY_DX6GCR1_PDREN_MASK | DDR_PHY_DX6GCR1_TEEN_MASK | DDR_PHY_DX6GCR1_DSEN_MASK | DDR_PHY_DX6GCR1_DMEN_MASK | DDR_PHY_DX6GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX6GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR4 @ 0XFD080D10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX6GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX6GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX6GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX6GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX6GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX6GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX6GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX6GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX6GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX6GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080D10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX6GCR4_RESERVED_31_29_MASK | DDR_PHY_DX6GCR4_DXREFPEN_MASK | DDR_PHY_DX6GCR4_DXREFEEN_MASK | DDR_PHY_DX6GCR4_DXREFSEN_MASK | DDR_PHY_DX6GCR4_RESERVED_24_MASK | DDR_PHY_DX6GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX6GCR4_DXREFESEL_MASK | DDR_PHY_DX6GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX6GCR4_DXREFSSEL_MASK | DDR_PHY_DX6GCR4_RESERVED_7_6_MASK | DDR_PHY_DX6GCR4_DXREFIEN_MASK | DDR_PHY_DX6GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX6GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX6GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX6GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX6GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR5 @ 0XFD080D14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX6GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080D14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX6GCR5_RESERVED_31_MASK | DDR_PHY_DX6GCR5_DXREFISELR3_MASK | DDR_PHY_DX6GCR5_RESERVED_23_MASK | DDR_PHY_DX6GCR5_DXREFISELR2_MASK | DDR_PHY_DX6GCR5_RESERVED_15_MASK | DDR_PHY_DX6GCR5_DXREFISELR1_MASK | DDR_PHY_DX6GCR5_RESERVED_7_MASK | DDR_PHY_DX6GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GCR6 @ 0XFD080D18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX6GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX6GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080D18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX6GCR6_RESERVED_31_30_MASK | DDR_PHY_DX6GCR6_DXDQVREFR3_MASK | DDR_PHY_DX6GCR6_RESERVED_23_22_MASK | DDR_PHY_DX6GCR6_DXDQVREFR2_MASK | DDR_PHY_DX6GCR6_RESERVED_15_14_MASK | DDR_PHY_DX6GCR6_DXDQVREFR1_MASK | DDR_PHY_DX6GCR6_RESERVED_7_6_MASK | DDR_PHY_DX6GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX6GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX6GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX6GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX6LCDLR2 @ 0XFD080D88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX6LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX6LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080D88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX6LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX6LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX6LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX6LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX6LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX6GTR0 @ 0XFD080DC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX6GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX6GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX6GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX6GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080DC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX6GTR0_RESERVED_31_24_MASK | DDR_PHY_DX6GTR0_WDQSL_MASK | DDR_PHY_DX6GTR0_RESERVED_23_20_MASK | DDR_PHY_DX6GTR0_WLSL_MASK | DDR_PHY_DX6GTR0_RESERVED_15_13_MASK | DDR_PHY_DX6GTR0_RESERVED_12_8_MASK | DDR_PHY_DX6GTR0_RESERVED_7_5_MASK | DDR_PHY_DX6GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX6GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX6GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX6GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX6GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR0 @ 0XFD080E00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX7GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX7GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX7GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX7GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX7GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX7GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX7GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX7GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX7GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX7GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX7GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX7GCR0_DQSGPDR                                                     0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX7GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX7GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080E00, 0xFFFFFFFFU ,0x40800604U)  
+		RegMask = (DDR_PHY_DX7GCR0_CALBYP_MASK | DDR_PHY_DX7GCR0_MDLEN_MASK | DDR_PHY_DX7GCR0_CODTSHFT_MASK | DDR_PHY_DX7GCR0_DQSDCC_MASK | DDR_PHY_DX7GCR0_RDDLY_MASK | DDR_PHY_DX7GCR0_RESERVED_19_14_MASK | DDR_PHY_DX7GCR0_DQSNSEPDR_MASK | DDR_PHY_DX7GCR0_DQSSEPDR_MASK | DDR_PHY_DX7GCR0_RTTOAL_MASK | DDR_PHY_DX7GCR0_RTTOH_MASK | DDR_PHY_DX7GCR0_CPDRSHFT_MASK | DDR_PHY_DX7GCR0_DQSRPD_MASK | DDR_PHY_DX7GCR0_DQSGPDR_MASK | DDR_PHY_DX7GCR0_RESERVED_4_MASK | DDR_PHY_DX7GCR0_DQSGODT_MASK | DDR_PHY_DX7GCR0_DQSGOE_MASK | DDR_PHY_DX7GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX7GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX7GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSRPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR1 @ 0XFD080E04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX7GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX7GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX7GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX7GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX7GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX7GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX7GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX7GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX7GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX7GCR1_DQEN                                                        0xff
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080E04, 0xFFFFFFFFU ,0x00007FFFU)  
+		RegMask = (DDR_PHY_DX7GCR1_DXPDRMODE_MASK | DDR_PHY_DX7GCR1_RESERVED_15_MASK | DDR_PHY_DX7GCR1_QSNSEL_MASK | DDR_PHY_DX7GCR1_QSSEL_MASK | DDR_PHY_DX7GCR1_OEEN_MASK | DDR_PHY_DX7GCR1_PDREN_MASK | DDR_PHY_DX7GCR1_TEEN_MASK | DDR_PHY_DX7GCR1_DSEN_MASK | DDR_PHY_DX7GCR1_DMEN_MASK | DDR_PHY_DX7GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR1_DMEN_SHIFT
+			| 0x000000FFU << DDR_PHY_DX7GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR4 @ 0XFD080E10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX7GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX7GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX7GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX7GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX7GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX7GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX7GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX7GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX7GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX7GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080E10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX7GCR4_RESERVED_31_29_MASK | DDR_PHY_DX7GCR4_DXREFPEN_MASK | DDR_PHY_DX7GCR4_DXREFEEN_MASK | DDR_PHY_DX7GCR4_DXREFSEN_MASK | DDR_PHY_DX7GCR4_RESERVED_24_MASK | DDR_PHY_DX7GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX7GCR4_DXREFESEL_MASK | DDR_PHY_DX7GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX7GCR4_DXREFSSEL_MASK | DDR_PHY_DX7GCR4_RESERVED_7_6_MASK | DDR_PHY_DX7GCR4_DXREFIEN_MASK | DDR_PHY_DX7GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX7GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX7GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX7GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX7GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR5 @ 0XFD080E14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX7GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080E14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX7GCR5_RESERVED_31_MASK | DDR_PHY_DX7GCR5_DXREFISELR3_MASK | DDR_PHY_DX7GCR5_RESERVED_23_MASK | DDR_PHY_DX7GCR5_DXREFISELR2_MASK | DDR_PHY_DX7GCR5_RESERVED_15_MASK | DDR_PHY_DX7GCR5_DXREFISELR1_MASK | DDR_PHY_DX7GCR5_RESERVED_7_MASK | DDR_PHY_DX7GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GCR6 @ 0XFD080E18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX7GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX7GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080E18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX7GCR6_RESERVED_31_30_MASK | DDR_PHY_DX7GCR6_DXDQVREFR3_MASK | DDR_PHY_DX7GCR6_RESERVED_23_22_MASK | DDR_PHY_DX7GCR6_DXDQVREFR2_MASK | DDR_PHY_DX7GCR6_RESERVED_15_14_MASK | DDR_PHY_DX7GCR6_DXDQVREFR1_MASK | DDR_PHY_DX7GCR6_RESERVED_7_6_MASK | DDR_PHY_DX7GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX7GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX7GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX7GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7LCDLR2 @ 0XFD080E88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX7LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX7LCDLR2_DQSGD                                                     0xa
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080E88, 0xFFFFFFFFU ,0x0000000AU)  
+		RegMask = (DDR_PHY_DX7LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX7LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX7LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX7LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_15_9_SHIFT
+			| 0x0000000AU << DDR_PHY_DX7LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7LCDLR2_OFFSET ,0xFFFFFFFFU ,0x0000000AU);
+	/*############################################################################################################################ */
+
+		/*Register : DX7GTR0 @ 0XFD080EC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX7GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX7GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX7GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX7GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080EC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX7GTR0_RESERVED_31_24_MASK | DDR_PHY_DX7GTR0_WDQSL_MASK | DDR_PHY_DX7GTR0_RESERVED_23_20_MASK | DDR_PHY_DX7GTR0_WLSL_MASK | DDR_PHY_DX7GTR0_RESERVED_15_13_MASK | DDR_PHY_DX7GTR0_RESERVED_12_8_MASK | DDR_PHY_DX7GTR0_RESERVED_7_5_MASK | DDR_PHY_DX7GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX7GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX7GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX7GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX7GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR0 @ 0XFD080F00

+
+		Calibration Bypass
+		PSU_DDR_PHY_DX8GCR0_CALBYP                                                      0x0
+
+		Master Delay Line Enable
+		PSU_DDR_PHY_DX8GCR0_MDLEN                                                       0x1
+
+		Configurable ODT(TE) Phase Shift
+		PSU_DDR_PHY_DX8GCR0_CODTSHFT                                                    0x0
+
+		DQS Duty Cycle Correction
+		PSU_DDR_PHY_DX8GCR0_DQSDCC                                                      0x0
+
+		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
+		PSU_DDR_PHY_DX8GCR0_RDDLY                                                       0x8
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GCR0_RESERVED_19_14                                              0x0
+
+		DQSNSE Power Down Receiver
+		PSU_DDR_PHY_DX8GCR0_DQSNSEPDR                                                   0x0
+
+		DQSSE Power Down Receiver
+		PSU_DDR_PHY_DX8GCR0_DQSSEPDR                                                    0x0
+
+		RTT On Additive Latency
+		PSU_DDR_PHY_DX8GCR0_RTTOAL                                                      0x0
+
+		RTT Output Hold
+		PSU_DDR_PHY_DX8GCR0_RTTOH                                                       0x3
+
+		Configurable PDR Phase Shift
+		PSU_DDR_PHY_DX8GCR0_CPDRSHFT                                                    0x0
+
+		DQSR Power Down
+		PSU_DDR_PHY_DX8GCR0_DQSRPD                                                      0x0
+
+		DQSG Power Down Receiver
+		PSU_DDR_PHY_DX8GCR0_DQSGPDR                                                     0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GCR0_RESERVED_4                                                  0x0
+
+		DQSG On-Die Termination
+		PSU_DDR_PHY_DX8GCR0_DQSGODT                                                     0x0
+
+		DQSG Output Enable
+		PSU_DDR_PHY_DX8GCR0_DQSGOE                                                      0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GCR0_RESERVED_1_0                                                0x0
+
+		DATX8 n General Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080F00, 0xFFFFFFFFU ,0x40800624U)  
+		RegMask = (DDR_PHY_DX8GCR0_CALBYP_MASK | DDR_PHY_DX8GCR0_MDLEN_MASK | DDR_PHY_DX8GCR0_CODTSHFT_MASK | DDR_PHY_DX8GCR0_DQSDCC_MASK | DDR_PHY_DX8GCR0_RDDLY_MASK | DDR_PHY_DX8GCR0_RESERVED_19_14_MASK | DDR_PHY_DX8GCR0_DQSNSEPDR_MASK | DDR_PHY_DX8GCR0_DQSSEPDR_MASK | DDR_PHY_DX8GCR0_RTTOAL_MASK | DDR_PHY_DX8GCR0_RTTOH_MASK | DDR_PHY_DX8GCR0_CPDRSHFT_MASK | DDR_PHY_DX8GCR0_DQSRPD_MASK | DDR_PHY_DX8GCR0_DQSGPDR_MASK | DDR_PHY_DX8GCR0_RESERVED_4_MASK | DDR_PHY_DX8GCR0_DQSGODT_MASK | DDR_PHY_DX8GCR0_DQSGOE_MASK | DDR_PHY_DX8GCR0_RESERVED_1_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR0_CALBYP_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR0_MDLEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_CODTSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSDCC_SHIFT
+			| 0x00000008U << DDR_PHY_DX8GCR0_RDDLY_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_19_14_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSNSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSSEPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RTTOAL_SHIFT
+			| 0x00000003U << DDR_PHY_DX8GCR0_RTTOH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_CPDRSHFT_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSRPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR0_DQSGPDR_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_4_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_DQSGODT_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR0_DQSGOE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_1_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR0_OFFSET ,0xFFFFFFFFU ,0x40800624U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR1 @ 0XFD080F04

+
+		Enables the PDR mode for DQ[7:0]
+		PSU_DDR_PHY_DX8GCR1_DXPDRMODE                                                   0x0
+
+		Reserved. Returns zeroes on reads.
+		PSU_DDR_PHY_DX8GCR1_RESERVED_15                                                 0x0
+
+		Select the delayed or non-delayed read data strobe #
+		PSU_DDR_PHY_DX8GCR1_QSNSEL                                                      0x1
+
+		Select the delayed or non-delayed read data strobe
+		PSU_DDR_PHY_DX8GCR1_QSSEL                                                       0x1
+
+		Enables Read Data Strobe in a byte lane
+		PSU_DDR_PHY_DX8GCR1_OEEN                                                        0x1
+
+		Enables PDR in a byte lane
+		PSU_DDR_PHY_DX8GCR1_PDREN                                                       0x1
+
+		Enables ODT/TE in a byte lane
+		PSU_DDR_PHY_DX8GCR1_TEEN                                                        0x1
+
+		Enables Write Data strobe in a byte lane
+		PSU_DDR_PHY_DX8GCR1_DSEN                                                        0x1
+
+		Enables DM pin in a byte lane
+		PSU_DDR_PHY_DX8GCR1_DMEN                                                        0x1
+
+		Enables DQ corresponding to each bit in a byte
+		PSU_DDR_PHY_DX8GCR1_DQEN                                                        0x0
+
+		DATX8 n General Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD080F04, 0xFFFFFFFFU ,0x00007F00U)  
+		RegMask = (DDR_PHY_DX8GCR1_DXPDRMODE_MASK | DDR_PHY_DX8GCR1_RESERVED_15_MASK | DDR_PHY_DX8GCR1_QSNSEL_MASK | DDR_PHY_DX8GCR1_QSSEL_MASK | DDR_PHY_DX8GCR1_OEEN_MASK | DDR_PHY_DX8GCR1_PDREN_MASK | DDR_PHY_DX8GCR1_TEEN_MASK | DDR_PHY_DX8GCR1_DSEN_MASK | DDR_PHY_DX8GCR1_DMEN_MASK | DDR_PHY_DX8GCR1_DQEN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR1_DXPDRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR1_RESERVED_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_QSNSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_QSSEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_OEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_PDREN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_TEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_DSEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR1_DMEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR1_DQEN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR1_OFFSET ,0xFFFFFFFFU ,0x00007F00U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR4 @ 0XFD080F10

+
+		Byte lane VREF IOM (Used only by D4MU IOs)
+		PSU_DDR_PHY_DX8GCR4_RESERVED_31_29                                              0x0
+
+		Byte Lane VREF Pad Enable
+		PSU_DDR_PHY_DX8GCR4_DXREFPEN                                                    0x0
+
+		Byte Lane Internal VREF Enable
+		PSU_DDR_PHY_DX8GCR4_DXREFEEN                                                    0x3
+
+		Byte Lane Single-End VREF Enable
+		PSU_DDR_PHY_DX8GCR4_DXREFSEN                                                    0x1
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR4_RESERVED_24                                                 0x0
+
+		External VREF generator REFSEL range select
+		PSU_DDR_PHY_DX8GCR4_DXREFESELRANGE                                              0x0
+
+		Byte Lane External VREF Select
+		PSU_DDR_PHY_DX8GCR4_DXREFESEL                                                   0x0
+
+		Single ended VREF generator REFSEL range select
+		PSU_DDR_PHY_DX8GCR4_DXREFSSELRANGE                                              0x1
+
+		Byte Lane Single-End VREF Select
+		PSU_DDR_PHY_DX8GCR4_DXREFSSEL                                                   0x30
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR4_RESERVED_7_6                                                0x0
+
+		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX8GCR4_DXREFIEN                                                    0xf
+
+		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
+		PSU_DDR_PHY_DX8GCR4_DXREFIMON                                                   0x0
+
+		DATX8 n General Configuration Register 4
+		(OFFSET, MASK, VALUE)      (0XFD080F10, 0xFFFFFFFFU ,0x0E00B03CU)  
+		RegMask = (DDR_PHY_DX8GCR4_RESERVED_31_29_MASK | DDR_PHY_DX8GCR4_DXREFPEN_MASK | DDR_PHY_DX8GCR4_DXREFEEN_MASK | DDR_PHY_DX8GCR4_DXREFSEN_MASK | DDR_PHY_DX8GCR4_RESERVED_24_MASK | DDR_PHY_DX8GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX8GCR4_DXREFESEL_MASK | DDR_PHY_DX8GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX8GCR4_DXREFSSEL_MASK | DDR_PHY_DX8GCR4_RESERVED_7_6_MASK | DDR_PHY_DX8GCR4_DXREFIEN_MASK | DDR_PHY_DX8GCR4_DXREFIMON_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR4_RESERVED_31_29_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFPEN_SHIFT
+			| 0x00000003U << DDR_PHY_DX8GCR4_DXREFEEN_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR4_DXREFSEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_RESERVED_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFESELRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFESEL_SHIFT
+			| 0x00000001U << DDR_PHY_DX8GCR4_DXREFSSELRANGE_SHIFT
+			| 0x00000030U << DDR_PHY_DX8GCR4_DXREFSSEL_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_RESERVED_7_6_SHIFT
+			| 0x0000000FU << DDR_PHY_DX8GCR4_DXREFIEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFIMON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR5 @ 0XFD080F14

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_31                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 3
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR3                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_23                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 2
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR2                                                 0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_15                                                 0x0
+
+		Byte Lane internal VREF Select for Rank 1
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR1                                                 0x55
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR5_RESERVED_7                                                  0x0
+
+		Byte Lane internal VREF Select for Rank 0
+		PSU_DDR_PHY_DX8GCR5_DXREFISELR0                                                 0x55
+
+		DATX8 n General Configuration Register 5
+		(OFFSET, MASK, VALUE)      (0XFD080F14, 0xFFFFFFFFU ,0x09095555U)  
+		RegMask = (DDR_PHY_DX8GCR5_RESERVED_31_MASK | DDR_PHY_DX8GCR5_DXREFISELR3_MASK | DDR_PHY_DX8GCR5_RESERVED_23_MASK | DDR_PHY_DX8GCR5_DXREFISELR2_MASK | DDR_PHY_DX8GCR5_RESERVED_15_MASK | DDR_PHY_DX8GCR5_DXREFISELR1_MASK | DDR_PHY_DX8GCR5_RESERVED_7_MASK | DDR_PHY_DX8GCR5_DXREFISELR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR5_RESERVED_31_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_23_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_15_SHIFT
+			| 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_7_SHIFT
+			| 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GCR6 @ 0XFD080F18

+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_31_30                                              0x0
+
+		DRAM DQ VREF Select for Rank3
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR3                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_23_22                                              0x0
+
+		DRAM DQ VREF Select for Rank2
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR2                                                  0x9
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_15_14                                              0x0
+
+		DRAM DQ VREF Select for Rank1
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR1                                                  0x2b
+
+		Reserved. Returns zeros on reads.
+		PSU_DDR_PHY_DX8GCR6_RESERVED_7_6                                                0x0
+
+		DRAM DQ VREF Select for Rank0
+		PSU_DDR_PHY_DX8GCR6_DXDQVREFR0                                                  0x2b
+
+		DATX8 n General Configuration Register 6
+		(OFFSET, MASK, VALUE)      (0XFD080F18, 0xFFFFFFFFU ,0x09092B2BU)  
+		RegMask = (DDR_PHY_DX8GCR6_RESERVED_31_30_MASK | DDR_PHY_DX8GCR6_DXDQVREFR3_MASK | DDR_PHY_DX8GCR6_RESERVED_23_22_MASK | DDR_PHY_DX8GCR6_DXDQVREFR2_MASK | DDR_PHY_DX8GCR6_RESERVED_15_14_MASK | DDR_PHY_DX8GCR6_DXDQVREFR1_MASK | DDR_PHY_DX8GCR6_RESERVED_7_6_MASK | DDR_PHY_DX8GCR6_DXDQVREFR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GCR6_RESERVED_31_30_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR6_DXDQVREFR3_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_23_22_SHIFT
+			| 0x00000009U << DDR_PHY_DX8GCR6_DXDQVREFR2_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_15_14_SHIFT
+			| 0x0000002BU << DDR_PHY_DX8GCR6_DXDQVREFR1_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_7_6_SHIFT
+			| 0x0000002BU << DDR_PHY_DX8GCR6_DXDQVREFR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
+	/*############################################################################################################################ */
+
+		/*Register : DX8LCDLR2 @ 0XFD080F88

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8LCDLR2_RESERVED_31_25                                            0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX8LCDLR2_RESERVED_24_16                                            0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8LCDLR2_RESERVED_15_9                                             0x0
+
+		Read DQS Gating Delay
+		PSU_DDR_PHY_DX8LCDLR2_DQSGD                                                     0x0
+
+		DATX8 n Local Calibrated Delay Line Register 2
+		(OFFSET, MASK, VALUE)      (0XFD080F88, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (DDR_PHY_DX8LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX8LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX8LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX8LCDLR2_DQSGD_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_31_25_SHIFT
+			| 0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_24_16_SHIFT
+			| 0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_15_9_SHIFT
+			| 0x00000000U << DDR_PHY_DX8LCDLR2_DQSGD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8GTR0 @ 0XFD080FC0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_31_24                                              0x0
+
+		DQ Write Path Latency Pipeline
+		PSU_DDR_PHY_DX8GTR0_WDQSL                                                       0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_23_20                                              0x0
+
+		Write Leveling System Latency
+		PSU_DDR_PHY_DX8GTR0_WLSL                                                        0x2
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_15_13                                              0x0
+
+		Reserved. Caution, do not write to this register field.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_12_8                                               0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8GTR0_RESERVED_7_5                                                0x0
+
+		DQS Gating System Latency
+		PSU_DDR_PHY_DX8GTR0_DGSL                                                        0x0
+
+		DATX8 n General Timing Register 0
+		(OFFSET, MASK, VALUE)      (0XFD080FC0, 0xFFFFFFFFU ,0x00020000U)  
+		RegMask = (DDR_PHY_DX8GTR0_RESERVED_31_24_MASK | DDR_PHY_DX8GTR0_WDQSL_MASK | DDR_PHY_DX8GTR0_RESERVED_23_20_MASK | DDR_PHY_DX8GTR0_WLSL_MASK | DDR_PHY_DX8GTR0_RESERVED_15_13_MASK | DDR_PHY_DX8GTR0_RESERVED_12_8_MASK | DDR_PHY_DX8GTR0_RESERVED_7_5_MASK | DDR_PHY_DX8GTR0_DGSL_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8GTR0_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_WDQSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_23_20_SHIFT
+			| 0x00000002U << DDR_PHY_DX8GTR0_WLSL_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_15_13_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_12_8_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_7_5_SHIFT
+			| 0x00000000U << DDR_PHY_DX8GTR0_DGSL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL0DQSCTL @ 0XFD08141C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL0DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL0DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL0DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL0DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL0DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL0DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL0DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL0DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08141C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL0DQSCTL_DXSR_MASK | DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL0DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL0DXCTL2 @ 0XFD08142C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL0DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL0DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL0DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL0DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL0DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL0DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL0DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL0DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL0DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL0DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD08142C, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL0DXCTL2_IOAG_MASK | DDR_PHY_DX8SL0DXCTL2_IOLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL0DXCTL2_RDBI_MASK | DDR_PHY_DX8SL0DXCTL2_WDBI_MASK | DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL0DXCTL2_DISRST_MASK | DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL0DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL0IOCR @ 0XFD081430

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL0IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL0IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL0IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL0IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL0IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL0IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD081430, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL0IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL0IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL0IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL0IOCR_DXIOM_MASK | DDR_PHY_DX8SL0IOCR_DXTXM_MASK | DDR_PHY_DX8SL0IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL0IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL0IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL0IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL0IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL1DQSCTL @ 0XFD08145C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL1DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL1DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL1DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL1DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL1DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL1DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL1DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL1DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08145C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL1DQSCTL_DXSR_MASK | DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL1DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL1DXCTL2 @ 0XFD08146C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL1DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL1DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL1DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL1DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL1DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL1DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL1DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL1DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL1DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL1DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD08146C, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL1DXCTL2_IOAG_MASK | DDR_PHY_DX8SL1DXCTL2_IOLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL1DXCTL2_RDBI_MASK | DDR_PHY_DX8SL1DXCTL2_WDBI_MASK | DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL1DXCTL2_DISRST_MASK | DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL1DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL1IOCR @ 0XFD081470

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL1IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL1IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL1IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL1IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL1IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL1IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD081470, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL1IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL1IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL1IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL1IOCR_DXIOM_MASK | DDR_PHY_DX8SL1IOCR_DXTXM_MASK | DDR_PHY_DX8SL1IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL1IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL1IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL1IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL1IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL2DQSCTL @ 0XFD08149C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL2DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL2DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL2DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL2DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL2DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL2DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL2DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL2DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08149C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL2DQSCTL_DXSR_MASK | DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL2DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL2DXCTL2 @ 0XFD0814AC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL2DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL2DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL2DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL2DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL2DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL2DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL2DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL2DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL2DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL2DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0814AC, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL2DXCTL2_IOAG_MASK | DDR_PHY_DX8SL2DXCTL2_IOLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL2DXCTL2_RDBI_MASK | DDR_PHY_DX8SL2DXCTL2_WDBI_MASK | DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL2DXCTL2_DISRST_MASK | DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL2DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL2IOCR @ 0XFD0814B0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL2IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL2IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL2IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL2IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL2IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL2IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD0814B0, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL2IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL2IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL2IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL2IOCR_DXIOM_MASK | DDR_PHY_DX8SL2IOCR_DXTXM_MASK | DDR_PHY_DX8SL2IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL2IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL2IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL2IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL2IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL3DQSCTL @ 0XFD0814DC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL3DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL3DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL3DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL3DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL3DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL3DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL3DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL3DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0814DC, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL3DQSCTL_DXSR_MASK | DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL3DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL3DXCTL2 @ 0XFD0814EC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL3DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL3DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL3DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL3DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL3DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL3DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL3DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL3DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL3DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL3DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD0814EC, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL3DXCTL2_IOAG_MASK | DDR_PHY_DX8SL3DXCTL2_IOLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL3DXCTL2_RDBI_MASK | DDR_PHY_DX8SL3DXCTL2_WDBI_MASK | DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL3DXCTL2_DISRST_MASK | DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL3DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL3IOCR @ 0XFD0814F0

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL3IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL3IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL3IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL3IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL3IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL3IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD0814F0, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL3IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL3IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL3IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL3IOCR_DXIOM_MASK | DDR_PHY_DX8SL3IOCR_DXTXM_MASK | DDR_PHY_DX8SL3IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL3IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL3IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL3IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL3IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL4DQSCTL @ 0XFD08151C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL4DQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SL4DQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SL4DQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SL4DQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SL4DQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SL4DQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SL4DQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SL4DQSCTL_DXSR                                                   0x3
+
+		DQS_N Resistor
+		PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-1 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD08151C, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL4DQSCTL_DXSR_MASK | DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL4DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL4DXCTL2 @ 0XFD08152C

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24                                         0x0
+
+		Configurable Read Data Enable
+		PSU_DDR_PHY_DX8SL4DXCTL2_CRDEN                                                  0x0
+
+		OX Extension during Post-amble
+		PSU_DDR_PHY_DX8SL4DXCTL2_POSOEX                                                 0x0
+
+		OE Extension during Pre-amble
+		PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_17                                            0x0
+
+		I/O Assisted Gate Select
+		PSU_DDR_PHY_DX8SL4DXCTL2_IOAG                                                   0x0
+
+		I/O Loopback Select
+		PSU_DDR_PHY_DX8SL4DXCTL2_IOLB                                                   0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13                                         0x0
+
+		Low Power Wakeup Threshold
+		PSU_DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH                                         0xc
+
+		Read Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL4DXCTL2_RDBI                                                   0x0
+
+		Write Data Bus Inversion Enable
+		PSU_DDR_PHY_DX8SL4DXCTL2_WDBI                                                   0x0
+
+		PUB Read FIFO Bypass
+		PSU_DDR_PHY_DX8SL4DXCTL2_PRFBYP                                                 0x0
+
+		DATX8 Receive FIFO Read Mode
+		PSU_DDR_PHY_DX8SL4DXCTL2_RDMODE                                                 0x0
+
+		Disables the Read FIFO Reset
+		PSU_DDR_PHY_DX8SL4DXCTL2_DISRST                                                 0x0
+
+		Read DQS Gate I/O Loopback
+		PSU_DDR_PHY_DX8SL4DXCTL2_DQSGLB                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_0                                             0x0
+
+		DATX8 0-1 DX Control Register 2
+		(OFFSET, MASK, VALUE)      (0XFD08152C, 0xFFFFFFFFU ,0x00001800U)  
+		RegMask = (DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL4DXCTL2_IOAG_MASK | DDR_PHY_DX8SL4DXCTL2_IOLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL4DXCTL2_RDBI_MASK | DDR_PHY_DX8SL4DXCTL2_WDBI_MASK | DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL4DXCTL2_DISRST_MASK | DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_WDBI_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_PRFBYP_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RDMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DISRST_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL4DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SL4IOCR @ 0XFD081530

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SL4IOCR_RESERVED_31                                              0x0
+
+		PVREF_DAC REFSEL range select
+		PSU_DDR_PHY_DX8SL4IOCR_DXDACRANGE                                               0x7
+
+		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
+		PSU_DDR_PHY_DX8SL4IOCR_DXVREFIOM                                                0x0
+
+		DX IO Mode
+		PSU_DDR_PHY_DX8SL4IOCR_DXIOM                                                    0x2
+
+		DX IO Transmitter Mode
+		PSU_DDR_PHY_DX8SL4IOCR_DXTXM                                                    0x0
+
+		DX IO Receiver Mode
+		PSU_DDR_PHY_DX8SL4IOCR_DXRXM                                                    0x0
+
+		DATX8 0-1 I/O Configuration Register
+		(OFFSET, MASK, VALUE)      (0XFD081530, 0xFFFFFFFFU ,0x70800000U)  
+		RegMask = (DDR_PHY_DX8SL4IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL4IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL4IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL4IOCR_DXIOM_MASK | DDR_PHY_DX8SL4IOCR_DXTXM_MASK | DDR_PHY_DX8SL4IOCR_DXRXM_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SL4IOCR_RESERVED_31_SHIFT
+			| 0x00000007U << DDR_PHY_DX8SL4IOCR_DXDACRANGE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXVREFIOM_SHIFT
+			| 0x00000002U << DDR_PHY_DX8SL4IOCR_DXIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXTXM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXRXM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SL4IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
+	/*############################################################################################################################ */
+
+		/*Register : DX8SLbDQSCTL @ 0XFD0817DC

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25                                         0x0
+
+		Read Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SLBDQSCTL_RRRMODE                                                0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22                                         0x0
+
+		Write Path Rise-to-Rise Mode
+		PSU_DDR_PHY_DX8SLBDQSCTL_WRRMODE                                                0x1
+
+		DQS Gate Extension
+		PSU_DDR_PHY_DX8SLBDQSCTL_DQSGX                                                  0x0
+
+		Low Power PLL Power Down
+		PSU_DDR_PHY_DX8SLBDQSCTL_LPPLLPD                                                0x1
+
+		Low Power I/O Power Down
+		PSU_DDR_PHY_DX8SLBDQSCTL_LPIOPD                                                 0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15                                         0x0
+
+		QS Counter Enable
+		PSU_DDR_PHY_DX8SLBDQSCTL_QSCNTEN                                                0x1
+
+		Unused DQ I/O Mode
+		PSU_DDR_PHY_DX8SLBDQSCTL_UDQIOM                                                 0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10                                         0x0
+
+		Data Slew Rate
+		PSU_DDR_PHY_DX8SLBDQSCTL_DXSR                                                   0x3
+
+		DQS# Resistor
+		PSU_DDR_PHY_DX8SLBDQSCTL_DQSNRES                                                0xc
+
+		DQS Resistor
+		PSU_DDR_PHY_DX8SLBDQSCTL_DQSRES                                                 0x4
+
+		DATX8 0-8 DQS Control Register
+		(OFFSET, MASK, VALUE)      (0XFD0817DC, 0xFFFFFFFFU ,0x012643C4U)  
+		RegMask = (DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SLBDQSCTL_RRRMODE_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SLBDQSCTL_WRRMODE_MASK | DDR_PHY_DX8SLBDQSCTL_DQSGX_MASK | DDR_PHY_DX8SLBDQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SLBDQSCTL_LPIOPD_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SLBDQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SLBDQSCTL_UDQIOM_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SLBDQSCTL_DXSR_MASK | DDR_PHY_DX8SLBDQSCTL_DQSNRES_MASK | DDR_PHY_DX8SLBDQSCTL_DQSRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_RRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_WRRMODE_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_DQSGX_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_LPPLLPD_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_LPIOPD_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_SHIFT
+			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_QSCNTEN_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_UDQIOM_SHIFT
+			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_SHIFT
+			| 0x00000003U << DDR_PHY_DX8SLBDQSCTL_DXSR_SHIFT
+			| 0x0000000CU << DDR_PHY_DX8SLBDQSCTL_DQSNRES_SHIFT
+			| 0x00000004U << DDR_PHY_DX8SLBDQSCTL_DQSRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_DX8SLBDQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
+	/*############################################################################################################################ */
+
+		/*Register : PIR @ 0XFD080004

+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PIR_RESERVED_31                                                     0x0
+
+		Impedance Calibration Bypass
+		PSU_DDR_PHY_PIR_ZCALBYP                                                         0x0
+
+		Digital Delay Line (DDL) Calibration Pause
+		PSU_DDR_PHY_PIR_DCALPSE                                                         0x0
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PIR_RESERVED_28_21                                                  0x0
+
+		Write DQS2DQ Training
+		PSU_DDR_PHY_PIR_DQS2DQ                                                          0x0
+
+		RDIMM Initialization
+		PSU_DDR_PHY_PIR_RDIMMINIT                                                       0x0
+
+		Controller DRAM Initialization
+		PSU_DDR_PHY_PIR_CTLDINIT                                                        0x1
+
+		VREF Training
+		PSU_DDR_PHY_PIR_VREF                                                            0x0
+
+		Static Read Training
+		PSU_DDR_PHY_PIR_SRD                                                             0x0
+
+		Write Data Eye Training
+		PSU_DDR_PHY_PIR_WREYE                                                           0x0
+
+		Read Data Eye Training
+		PSU_DDR_PHY_PIR_RDEYE                                                           0x0
+
+		Write Data Bit Deskew
+		PSU_DDR_PHY_PIR_WRDSKW                                                          0x0
+
+		Read Data Bit Deskew
+		PSU_DDR_PHY_PIR_RDDSKW                                                          0x0
+
+		Write Leveling Adjust
+		PSU_DDR_PHY_PIR_WLADJ                                                           0x0
+
+		Read DQS Gate Training
+		PSU_DDR_PHY_PIR_QSGATE                                                          0x0
+
+		Write Leveling
+		PSU_DDR_PHY_PIR_WL                                                              0x0
+
+		DRAM Initialization
+		PSU_DDR_PHY_PIR_DRAMINIT                                                        0x0
+
+		DRAM Reset (DDR3/DDR4/LPDDR4 Only)
+		PSU_DDR_PHY_PIR_DRAMRST                                                         0x0
+
+		PHY Reset
+		PSU_DDR_PHY_PIR_PHYRST                                                          0x1
+
+		Digital Delay Line (DDL) Calibration
+		PSU_DDR_PHY_PIR_DCAL                                                            0x1
+
+		PLL Initialiazation
+		PSU_DDR_PHY_PIR_PLLINIT                                                         0x1
+
+		Reserved. Return zeroes on reads.
+		PSU_DDR_PHY_PIR_RESERVED_3                                                      0x0
+
+		CA Training
+		PSU_DDR_PHY_PIR_CA                                                              0x0
+
+		Impedance Calibration
+		PSU_DDR_PHY_PIR_ZCAL                                                            0x1
+
+		Initialization Trigger
+		PSU_DDR_PHY_PIR_INIT                                                            0x1
+
+		PHY Initialization Register
+		(OFFSET, MASK, VALUE)      (0XFD080004, 0xFFFFFFFFU ,0x00040073U)  
+		RegMask = (DDR_PHY_PIR_RESERVED_31_MASK | DDR_PHY_PIR_ZCALBYP_MASK | DDR_PHY_PIR_DCALPSE_MASK | DDR_PHY_PIR_RESERVED_28_21_MASK | DDR_PHY_PIR_DQS2DQ_MASK | DDR_PHY_PIR_RDIMMINIT_MASK | DDR_PHY_PIR_CTLDINIT_MASK | DDR_PHY_PIR_VREF_MASK | DDR_PHY_PIR_SRD_MASK | DDR_PHY_PIR_WREYE_MASK | DDR_PHY_PIR_RDEYE_MASK | DDR_PHY_PIR_WRDSKW_MASK | DDR_PHY_PIR_RDDSKW_MASK | DDR_PHY_PIR_WLADJ_MASK | DDR_PHY_PIR_QSGATE_MASK | DDR_PHY_PIR_WL_MASK | DDR_PHY_PIR_DRAMINIT_MASK | DDR_PHY_PIR_DRAMRST_MASK | DDR_PHY_PIR_PHYRST_MASK | DDR_PHY_PIR_DCAL_MASK | DDR_PHY_PIR_PLLINIT_MASK | DDR_PHY_PIR_RESERVED_3_MASK | DDR_PHY_PIR_CA_MASK | DDR_PHY_PIR_ZCAL_MASK | DDR_PHY_PIR_INIT_MASK |  0 );
+
+		RegVal = ((0x00000000U << DDR_PHY_PIR_RESERVED_31_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_ZCALBYP_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DCALPSE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RESERVED_28_21_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DQS2DQ_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RDIMMINIT_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_CTLDINIT_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_VREF_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_SRD_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WREYE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RDEYE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WRDSKW_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RDDSKW_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WLADJ_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_QSGATE_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_WL_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DRAMINIT_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_DRAMRST_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_PHYRST_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_DCAL_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_PLLINIT_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_RESERVED_3_SHIFT
+			| 0x00000000U << DDR_PHY_PIR_CA_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_ZCAL_SHIFT
+			| 0x00000001U << DDR_PHY_PIR_INIT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DDR_PHY_PIR_OFFSET ,0xFFFFFFFFU ,0x00040073U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_mio_init_data() {
+		// : MIO PROGRAMMING
+		/*Register : MIO_PIN_0 @ 0XFF180000

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out- (QSPI Clock)
+		PSU_IOU_SLCR_MIO_PIN_0_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_0_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[0]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[0]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_0_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[0]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[0]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)
+		PSU_IOU_SLCR_MIO_PIN_0_L3_SEL                                                   0
+
+		Configures MIO Pin 0 peripheral interface mapping. S
+		(OFFSET, MASK, VALUE)      (0XFF180000, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_0_L0_SEL_MASK | IOU_SLCR_MIO_PIN_0_L1_SEL_MASK | IOU_SLCR_MIO_PIN_0_L2_SEL_MASK | IOU_SLCR_MIO_PIN_0_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_0_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_1 @ 0XFF180004

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_mi1- (QSPI Databus) 1= qspi, Output, qspi_so_mo1- (QSPI Data
+		us)
+		PSU_IOU_SLCR_MIO_PIN_1_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_1_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[1]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[1]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_1_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[1]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[1]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)
+		PSU_IOU_SLCR_MIO_PIN_1_L3_SEL                                                   0
+
+		Configures MIO Pin 1 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180004, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_1_L0_SEL_MASK | IOU_SLCR_MIO_PIN_1_L1_SEL_MASK | IOU_SLCR_MIO_PIN_1_L2_SEL_MASK | IOU_SLCR_MIO_PIN_1_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_1_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_2 @ 0XFF180008

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi2- (QSPI Databus) 1= qspi, Output, qspi_mo2- (QSPI Databus)
+		PSU_IOU_SLCR_MIO_PIN_2_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_2_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[2]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[2]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_2_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[2]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[2]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc2, Input, ttc2_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_2_L3_SEL                                                   0
+
+		Configures MIO Pin 2 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180008, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_2_L0_SEL_MASK | IOU_SLCR_MIO_PIN_2_L1_SEL_MASK | IOU_SLCR_MIO_PIN_2_L2_SEL_MASK | IOU_SLCR_MIO_PIN_2_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_2_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_3 @ 0XFF18000C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi3- (QSPI Databus) 1= qspi, Output, qspi_mo3- (QSPI Databus)
+		PSU_IOU_SLCR_MIO_PIN_3_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_3_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[3]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[3]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_3_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[3]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[3]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_3_L3_SEL                                                   0
+
+		Configures MIO Pin 3 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18000C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_3_L0_SEL_MASK | IOU_SLCR_MIO_PIN_3_L1_SEL_MASK | IOU_SLCR_MIO_PIN_3_L2_SEL_MASK | IOU_SLCR_MIO_PIN_3_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_3_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_4 @ 0XFF180010

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_mo_mo0- (QSPI Databus) 1= qspi, Input, qspi_si_mi0- (QSPI Data
+		us)
+		PSU_IOU_SLCR_MIO_PIN_4_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_4_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[4]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[4]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_4_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[4]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[4]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_4_L3_SEL                                                   0
+
+		Configures MIO Pin 4 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180010, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_4_L0_SEL_MASK | IOU_SLCR_MIO_PIN_4_L1_SEL_MASK | IOU_SLCR_MIO_PIN_4_L2_SEL_MASK | IOU_SLCR_MIO_PIN_4_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_4_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_5 @ 0XFF180014

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out- (QSPI Slave Select)
+		PSU_IOU_SLCR_MIO_PIN_5_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_5_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[5]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[5]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_5_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[5]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[5]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_5_L3_SEL                                                   0
+
+		Configures MIO Pin 5 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180014, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_5_L0_SEL_MASK | IOU_SLCR_MIO_PIN_5_L1_SEL_MASK | IOU_SLCR_MIO_PIN_5_L2_SEL_MASK | IOU_SLCR_MIO_PIN_5_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_5_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_6 @ 0XFF180018

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_clk_for_lpbk- (QSPI Clock to be fed-back)
+		PSU_IOU_SLCR_MIO_PIN_6_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_6_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[6]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[6]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_6_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[6]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[6]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1
+		sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace,
+		Output, tracedq[4]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_6_L3_SEL                                                   0
+
+		Configures MIO Pin 6 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180018, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_6_L0_SEL_MASK | IOU_SLCR_MIO_PIN_6_L1_SEL_MASK | IOU_SLCR_MIO_PIN_6_L2_SEL_MASK | IOU_SLCR_MIO_PIN_6_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_6_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_7 @ 0XFF18001C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out_upper- (QSPI Slave Select upper)
+		PSU_IOU_SLCR_MIO_PIN_7_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_7_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[7]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[7]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_7_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[7]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[7]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= 
+		tc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, 
+		racedq[5]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_7_L3_SEL                                                   0
+
+		Configures MIO Pin 7 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18001C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_7_L0_SEL_MASK | IOU_SLCR_MIO_PIN_7_L1_SEL_MASK | IOU_SLCR_MIO_PIN_7_L2_SEL_MASK | IOU_SLCR_MIO_PIN_7_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_7_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_8 @ 0XFF180020

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[0]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[0]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_8_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_8_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[8]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[8]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_8_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[8]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[8]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc
+		, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Tr
+		ce Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_8_L3_SEL                                                   0
+
+		Configures MIO Pin 8 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180020, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_8_L0_SEL_MASK | IOU_SLCR_MIO_PIN_8_L1_SEL_MASK | IOU_SLCR_MIO_PIN_8_L2_SEL_MASK | IOU_SLCR_MIO_PIN_8_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_8_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_9 @ 0XFF180024

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[1]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[1]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_9_L0_SEL                                                   1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
+		PSU_IOU_SLCR_MIO_PIN_9_L1_SEL                                                   0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[9]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[9]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_9_L2_SEL                                                   0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[9]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[9]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, 
+		utput, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (U
+		RT receiver serial input) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_9_L3_SEL                                                   0
+
+		Configures MIO Pin 9 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180024, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_9_L0_SEL_MASK | IOU_SLCR_MIO_PIN_9_L1_SEL_MASK | IOU_SLCR_MIO_PIN_9_L2_SEL_MASK | IOU_SLCR_MIO_PIN_9_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_9_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_10 @ 0XFF180028

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[2]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[2]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_10_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_10_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[10]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[10]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_10_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[10]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[10]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_10_L3_SEL                                                  0
+
+		Configures MIO Pin 10 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180028, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_10_L0_SEL_MASK | IOU_SLCR_MIO_PIN_10_L1_SEL_MASK | IOU_SLCR_MIO_PIN_10_L2_SEL_MASK | IOU_SLCR_MIO_PIN_10_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_10_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_11 @ 0XFF18002C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[3]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[3]- (QSPI Upper Databus)
+		PSU_IOU_SLCR_MIO_PIN_11_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_11_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[11]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[11]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_11_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[11]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[11]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_11_L3_SEL                                                  0
+
+		Configures MIO Pin 11 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18002C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_11_L0_SEL_MASK | IOU_SLCR_MIO_PIN_11_L1_SEL_MASK | IOU_SLCR_MIO_PIN_11_L2_SEL_MASK | IOU_SLCR_MIO_PIN_11_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_11_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_12 @ 0XFF180030

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out_upper- (QSPI Upper Clock)
+		PSU_IOU_SLCR_MIO_PIN_12_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		
+		PSU_IOU_SLCR_MIO_PIN_12_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[12]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[12]- (Test Scan Port) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_12_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[12]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[12]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cl
+		ck) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trac
+		dq[10]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_12_L3_SEL                                                  0
+
+		Configures MIO Pin 12 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180030, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_12_L0_SEL_MASK | IOU_SLCR_MIO_PIN_12_L1_SEL_MASK | IOU_SLCR_MIO_PIN_12_L2_SEL_MASK | IOU_SLCR_MIO_PIN_12_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_12_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_13 @ 0XFF180034

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_13_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[0]- (NAND chip enable)
+		PSU_IOU_SLCR_MIO_PIN_13_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[13]- (Test Scan Port) = test_scan, Output, test_scan_out[13]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_13_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[13]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[13]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave
+		out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, tracedq[11]- (Trace Port Dat
+		bus)
+		PSU_IOU_SLCR_MIO_PIN_13_L3_SEL                                                  0
+
+		Configures MIO Pin 13 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180034, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_13_L0_SEL_MASK | IOU_SLCR_MIO_PIN_13_L1_SEL_MASK | IOU_SLCR_MIO_PIN_13_L2_SEL_MASK | IOU_SLCR_MIO_PIN_13_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_13_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_14 @ 0XFF180038

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_14_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_cle- (NAND Command Latch Enable)
+		PSU_IOU_SLCR_MIO_PIN_14_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[14]- (Test Scan Port) = test_scan, Output, test_scan_out[14]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_14_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[14]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[14]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_
+		n- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_14_L3_SEL                                                  2
+
+		Configures MIO Pin 14 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180038, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_14_L0_SEL_MASK | IOU_SLCR_MIO_PIN_14_L1_SEL_MASK | IOU_SLCR_MIO_PIN_14_L2_SEL_MASK | IOU_SLCR_MIO_PIN_14_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_14_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_15 @ 0XFF18003C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_15_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ale- (NAND Address Latch Enable)
+		PSU_IOU_SLCR_MIO_PIN_15_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[15]- (Test Scan Port) = test_scan, Output, test_scan_out[15]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_15_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[15]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[15]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out
+		0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter seri
+		l output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_15_L3_SEL                                                  2
+
+		Configures MIO Pin 15 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18003C, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_15_L0_SEL_MASK | IOU_SLCR_MIO_PIN_15_L1_SEL_MASK | IOU_SLCR_MIO_PIN_15_L2_SEL_MASK | IOU_SLCR_MIO_PIN_15_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_15_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_16 @ 0XFF180040

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_16_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[0]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[0]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_16_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[16]- (Test Scan Port) = test_scan, Output, test_scan_out[16]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_16_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[16]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[16]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_16_L3_SEL                                                  2
+
+		Configures MIO Pin 16 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180040, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_16_L0_SEL_MASK | IOU_SLCR_MIO_PIN_16_L1_SEL_MASK | IOU_SLCR_MIO_PIN_16_L2_SEL_MASK | IOU_SLCR_MIO_PIN_16_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_16_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_17 @ 0XFF180044

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_17_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[1]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[1]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_17_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[17]- (Test Scan Port) = test_scan, Output, test_scan_out[17]- (Test Scan Port
+		 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_17_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[17]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[17]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_17_L3_SEL                                                  2
+
+		Configures MIO Pin 17 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180044, 0x000000FEU ,0x00000040U)  
+		RegMask = (IOU_SLCR_MIO_PIN_17_L0_SEL_MASK | IOU_SLCR_MIO_PIN_17_L1_SEL_MASK | IOU_SLCR_MIO_PIN_17_L2_SEL_MASK | IOU_SLCR_MIO_PIN_17_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_17_OFFSET ,0x000000FEU ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_18 @ 0XFF180048

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_18_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[2]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[2]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_18_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[18]- (Test Scan Port) = test_scan, Output, test_scan_out[18]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_18_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[18]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[18]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_18_L3_SEL                                                  6
+
+		Configures MIO Pin 18 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180048, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_18_L0_SEL_MASK | IOU_SLCR_MIO_PIN_18_L1_SEL_MASK | IOU_SLCR_MIO_PIN_18_L2_SEL_MASK | IOU_SLCR_MIO_PIN_18_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_18_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_19 @ 0XFF18004C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_19_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[3]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[3]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_19_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[19]- (Test Scan Port) = test_scan, Output, test_scan_out[19]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_19_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[19]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[19]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_19_L3_SEL                                                  6
+
+		Configures MIO Pin 19 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18004C, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_19_L0_SEL_MASK | IOU_SLCR_MIO_PIN_19_L1_SEL_MASK | IOU_SLCR_MIO_PIN_19_L2_SEL_MASK | IOU_SLCR_MIO_PIN_19_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_19_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_20 @ 0XFF180050

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_20_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[4]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[4]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_20_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[20]- (Test Scan Port) = test_scan, Output, test_scan_out[20]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_20_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[20]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[20]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= t
+		c1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_20_L3_SEL                                                  6
+
+		Configures MIO Pin 20 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180050, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_20_L0_SEL_MASK | IOU_SLCR_MIO_PIN_20_L1_SEL_MASK | IOU_SLCR_MIO_PIN_20_L2_SEL_MASK | IOU_SLCR_MIO_PIN_20_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_20_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_21 @ 0XFF180054

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_21_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[5]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[5]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_21_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= test_scan, Input, test_scan_in[21]- (Test Scan Port) = test_scan, Output, test_scan_out[21]- (Test Scan Port) 
+		= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_21_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[21]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[21]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- 
+		UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_21_L3_SEL                                                  6
+
+		Configures MIO Pin 21 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180054, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_21_L0_SEL_MASK | IOU_SLCR_MIO_PIN_21_L1_SEL_MASK | IOU_SLCR_MIO_PIN_21_L2_SEL_MASK | IOU_SLCR_MIO_PIN_21_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_21_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_22 @ 0XFF180058

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_22_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_we_b- (NAND Write Enable)
+		PSU_IOU_SLCR_MIO_PIN_22_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= test_scan, Input, test_scan_in[22]-
+		(Test Scan Port) = test_scan, Output, test_scan_out[22]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_22_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[22]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[22]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed
+		PSU_IOU_SLCR_MIO_PIN_22_L3_SEL                                                  0
+
+		Configures MIO Pin 22 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180058, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_22_L0_SEL_MASK | IOU_SLCR_MIO_PIN_22_L1_SEL_MASK | IOU_SLCR_MIO_PIN_22_L2_SEL_MASK | IOU_SLCR_MIO_PIN_22_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_22_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_23 @ 0XFF18005C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_23_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[6]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[6]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_23_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= test_scan, Input, test_scan_in
+		23]- (Test Scan Port) = test_scan, Output, test_scan_out[23]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper
+		
+		PSU_IOU_SLCR_MIO_PIN_23_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[23]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[23]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_23_L3_SEL                                                  0
+
+		Configures MIO Pin 23 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18005C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_23_L0_SEL_MASK | IOU_SLCR_MIO_PIN_23_L1_SEL_MASK | IOU_SLCR_MIO_PIN_23_L2_SEL_MASK | IOU_SLCR_MIO_PIN_23_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_23_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_24 @ 0XFF180060

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_24_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[7]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[7]- (NAND 
+		ata Bus)
+		PSU_IOU_SLCR_MIO_PIN_24_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= test_scan, Input, test
+		scan_in[24]- (Test Scan Port) = test_scan, Output, test_scan_out[24]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ex
+		 Tamper)
+		PSU_IOU_SLCR_MIO_PIN_24_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[24]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[24]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= Not Used 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1,
+		Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_24_L3_SEL                                                  1
+
+		Configures MIO Pin 24 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180060, 0x000000FEU ,0x00000020U)  
+		RegMask = (IOU_SLCR_MIO_PIN_24_L0_SEL_MASK | IOU_SLCR_MIO_PIN_24_L1_SEL_MASK | IOU_SLCR_MIO_PIN_24_L2_SEL_MASK | IOU_SLCR_MIO_PIN_24_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_24_OFFSET ,0x000000FEU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_25 @ 0XFF180064

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_25_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_re_n- (NAND Read Enable)
+		PSU_IOU_SLCR_MIO_PIN_25_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= test_scan, Input,
+		test_scan_in[25]- (Test Scan Port) = test_scan, Output, test_scan_out[25]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (C
+		U Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_25_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[25]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[25]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= Not Used 5= ttc3, Output, ttc3_wave_out- (TTC Waveform 
+		lock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_25_L3_SEL                                                  1
+
+		Configures MIO Pin 25 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180064, 0x000000FEU ,0x00000020U)  
+		RegMask = (IOU_SLCR_MIO_PIN_25_L0_SEL_MASK | IOU_SLCR_MIO_PIN_25_L1_SEL_MASK | IOU_SLCR_MIO_PIN_25_L2_SEL_MASK | IOU_SLCR_MIO_PIN_25_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_25_OFFSET ,0x000000FEU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_26 @ 0XFF180068

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_26_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
+		PSU_IOU_SLCR_MIO_PIN_26_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_26_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_26_L3_SEL                                                  0
+
+		Configures MIO Pin 26 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180068, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_26_L0_SEL_MASK | IOU_SLCR_MIO_PIN_26_L1_SEL_MASK | IOU_SLCR_MIO_PIN_26_L2_SEL_MASK | IOU_SLCR_MIO_PIN_26_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_26_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_27 @ 0XFF18006C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_27_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_27_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_27_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)
+		PSU_IOU_SLCR_MIO_PIN_27_L3_SEL                                                  0
+
+		Configures MIO Pin 27 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18006C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_27_L0_SEL_MASK | IOU_SLCR_MIO_PIN_27_L1_SEL_MASK | IOU_SLCR_MIO_PIN_27_L2_SEL_MASK | IOU_SLCR_MIO_PIN_27_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_27_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_28 @ 0XFF180070

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_28_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
+		PSU_IOU_SLCR_MIO_PIN_28_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_28_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_28_L3_SEL                                                  0
+
+		Configures MIO Pin 28 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180070, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_28_L0_SEL_MASK | IOU_SLCR_MIO_PIN_28_L1_SEL_MASK | IOU_SLCR_MIO_PIN_28_L2_SEL_MASK | IOU_SLCR_MIO_PIN_28_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_28_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_29 @ 0XFF180074

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_29_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_29_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_29_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_29_L3_SEL                                                  0
+
+		Configures MIO Pin 29 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180074, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_29_L0_SEL_MASK | IOU_SLCR_MIO_PIN_29_L1_SEL_MASK | IOU_SLCR_MIO_PIN_29_L2_SEL_MASK | IOU_SLCR_MIO_PIN_29_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_29_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_30 @ 0XFF180078

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_30_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_30_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_30_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_so
+		 (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output
+		 tracedq[8]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_30_L3_SEL                                                  0
+
+		Configures MIO Pin 30 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180078, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_30_L0_SEL_MASK | IOU_SLCR_MIO_PIN_30_L1_SEL_MASK | IOU_SLCR_MIO_PIN_30_L2_SEL_MASK | IOU_SLCR_MIO_PIN_30_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_30_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_31 @ 0XFF18007C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_31_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_31_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[31]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[31]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_31_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[5]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[5]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi
+		_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial out
+		ut) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_31_L3_SEL                                                  0
+
+		Configures MIO Pin 31 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18007C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_31_L0_SEL_MASK | IOU_SLCR_MIO_PIN_31_L1_SEL_MASK | IOU_SLCR_MIO_PIN_31_L2_SEL_MASK | IOU_SLCR_MIO_PIN_31_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_31_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_32 @ 0XFF180080

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_32_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		
+		PSU_IOU_SLCR_MIO_PIN_32_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[32]- (Test S
+		an Port) = test_scan, Output, test_scan_out[32]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_32_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[6]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[6]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi
+		_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= 
+		race, Output, tracedq[10]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_32_L3_SEL                                                  0
+
+		Configures MIO Pin 32 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180080, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_32_L0_SEL_MASK | IOU_SLCR_MIO_PIN_32_L1_SEL_MASK | IOU_SLCR_MIO_PIN_32_L2_SEL_MASK | IOU_SLCR_MIO_PIN_32_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_32_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_33 @ 0XFF180084

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_33_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_33_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[33]- (Test S
+		an Port) = test_scan, Output, test_scan_out[33]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
+		PSU_IOU_SLCR_MIO_PIN_33_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[7]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[7]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= t
+		c3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, traced
+		[11]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_33_L3_SEL                                                  0
+
+		Configures MIO Pin 33 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180084, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_33_L0_SEL_MASK | IOU_SLCR_MIO_PIN_33_L1_SEL_MASK | IOU_SLCR_MIO_PIN_33_L2_SEL_MASK | IOU_SLCR_MIO_PIN_33_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_33_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_34 @ 0XFF180088

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_34_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_34_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[34]- (Test S
+		an Port) = test_scan, Output, test_scan_out[34]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_34_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[8]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[8]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc2
+		 Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace P
+		rt Databus)
+		PSU_IOU_SLCR_MIO_PIN_34_L3_SEL                                                  0
+
+		Configures MIO Pin 34 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180088, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_34_L0_SEL_MASK | IOU_SLCR_MIO_PIN_34_L1_SEL_MASK | IOU_SLCR_MIO_PIN_34_L2_SEL_MASK | IOU_SLCR_MIO_PIN_34_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_34_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_35 @ 0XFF18008C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_35_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_35_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[35]- (Test S
+		an Port) = test_scan, Output, test_scan_out[35]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_35_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[9]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[9]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1,
+		Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- 
+		UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_35_L3_SEL                                                  0
+
+		Configures MIO Pin 35 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18008C, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_35_L0_SEL_MASK | IOU_SLCR_MIO_PIN_35_L1_SEL_MASK | IOU_SLCR_MIO_PIN_35_L2_SEL_MASK | IOU_SLCR_MIO_PIN_35_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_35_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_36 @ 0XFF180090

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_36_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_36_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[36]- (Test S
+		an Port) = test_scan, Output, test_scan_out[36]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)
+		PSU_IOU_SLCR_MIO_PIN_36_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[10]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[10]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_36_L3_SEL                                                  0
+
+		Configures MIO Pin 36 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180090, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_36_L0_SEL_MASK | IOU_SLCR_MIO_PIN_36_L1_SEL_MASK | IOU_SLCR_MIO_PIN_36_L2_SEL_MASK | IOU_SLCR_MIO_PIN_36_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_36_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_37 @ 0XFF180094

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_37_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
+		PSU_IOU_SLCR_MIO_PIN_37_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[37]- (Test S
+		an Port) = test_scan, Output, test_scan_out[37]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
+		PSU_IOU_SLCR_MIO_PIN_37_L2_SEL                                                  1
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[11]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[11]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_37_L3_SEL                                                  0
+
+		Configures MIO Pin 37 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180094, 0x000000FEU ,0x00000008U)  
+		RegMask = (IOU_SLCR_MIO_PIN_37_L0_SEL_MASK | IOU_SLCR_MIO_PIN_37_L1_SEL_MASK | IOU_SLCR_MIO_PIN_37_L2_SEL_MASK | IOU_SLCR_MIO_PIN_37_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_37_OFFSET ,0x000000FEU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_38 @ 0XFF180098

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_38_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_38_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_38_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[12]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[12]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clo
+		k) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, trace_clk-
+		(Trace Port Clock)
+		PSU_IOU_SLCR_MIO_PIN_38_L3_SEL                                                  0
+
+		Configures MIO Pin 38 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180098, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_38_L0_SEL_MASK | IOU_SLCR_MIO_PIN_38_L1_SEL_MASK | IOU_SLCR_MIO_PIN_38_L2_SEL_MASK | IOU_SLCR_MIO_PIN_38_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_38_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_39 @ 0XFF18009C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_39_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_39_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= sd1, Input, sd1_data_i
+		[4]- (8-bit Data bus) = sd1, Output, sdio1_data_out[4]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_39_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[13]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[13]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc0, Output, ttc0_wav
+		_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, trace_ctl- (Trace Port
+		Control Signal)
+		PSU_IOU_SLCR_MIO_PIN_39_L3_SEL                                                  0
+
+		Configures MIO Pin 39 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18009C, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_39_L0_SEL_MASK | IOU_SLCR_MIO_PIN_39_L1_SEL_MASK | IOU_SLCR_MIO_PIN_39_L2_SEL_MASK | IOU_SLCR_MIO_PIN_39_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_39_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_40 @ 0XFF1800A0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_40_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_40_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= sd1, Input, sd1_data_in[5]- (8-bit Data bus) = sd1, Output, sdio1_data_out[5]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_40_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[14]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[14]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc3, Input, ttc3_clk
+		in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_40_L3_SEL                                                  0
+
+		Configures MIO Pin 40 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800A0, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_40_L0_SEL_MASK | IOU_SLCR_MIO_PIN_40_L1_SEL_MASK | IOU_SLCR_MIO_PIN_40_L2_SEL_MASK | IOU_SLCR_MIO_PIN_40_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_40_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_41 @ 0XFF1800A4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_41_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_41_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[6]- (8-bit Data bus) = sd1, Output, sdio1_data_out[6]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_41_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[15]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[15]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[
+		]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial in
+		ut) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_41_L3_SEL                                                  0
+
+		Configures MIO Pin 41 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800A4, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_41_L0_SEL_MASK | IOU_SLCR_MIO_PIN_41_L1_SEL_MASK | IOU_SLCR_MIO_PIN_41_L2_SEL_MASK | IOU_SLCR_MIO_PIN_41_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_41_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_42 @ 0XFF1800A8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_42_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_42_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[7]- (8-bit Data bus) = sd1, Output, sdio1_data_out[7]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_42_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[16]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[16]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[2]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_42_L3_SEL                                                  0
+
+		Configures MIO Pin 42 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800A8, 0x000000FEU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_PIN_42_L0_SEL_MASK | IOU_SLCR_MIO_PIN_42_L1_SEL_MASK | IOU_SLCR_MIO_PIN_42_L2_SEL_MASK | IOU_SLCR_MIO_PIN_42_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_42_OFFSET ,0x000000FEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_43 @ 0XFF1800AC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_43_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_43_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_43_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[17]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[17]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, s
+		i0_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[3]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_43_L3_SEL                                                  0
+
+		Configures MIO Pin 43 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800AC, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_43_L0_SEL_MASK | IOU_SLCR_MIO_PIN_43_L1_SEL_MASK | IOU_SLCR_MIO_PIN_43_L2_SEL_MASK | IOU_SLCR_MIO_PIN_43_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_43_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_44 @ 0XFF1800B0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_44_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_44_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_44_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[18]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[18]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, s
+		i1_sclk_out- (SPI Clock) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 Not Used
+		PSU_IOU_SLCR_MIO_PIN_44_L3_SEL                                                  0
+
+		Configures MIO Pin 44 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800B0, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_44_L0_SEL_MASK | IOU_SLCR_MIO_PIN_44_L1_SEL_MASK | IOU_SLCR_MIO_PIN_44_L2_SEL_MASK | IOU_SLCR_MIO_PIN_44_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_44_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_45 @ 0XFF1800B4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_45_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_45_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_45_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[19]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[19]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_45_L3_SEL                                                  0
+
+		Configures MIO Pin 45 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800B4, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_45_L0_SEL_MASK | IOU_SLCR_MIO_PIN_45_L1_SEL_MASK | IOU_SLCR_MIO_PIN_45_L2_SEL_MASK | IOU_SLCR_MIO_PIN_45_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_45_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_46 @ 0XFF1800B8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_46_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_46_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_46_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[20]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[20]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= tt
+		0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_46_L3_SEL                                                  0
+
+		Configures MIO Pin 46 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800B8, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_46_L0_SEL_MASK | IOU_SLCR_MIO_PIN_46_L1_SEL_MASK | IOU_SLCR_MIO_PIN_46_L2_SEL_MASK | IOU_SLCR_MIO_PIN_46_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_46_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_47 @ 0XFF1800BC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_47_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_47_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_47_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[21]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[21]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_47_L3_SEL                                                  0
+
+		Configures MIO Pin 47 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800BC, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_47_L0_SEL_MASK | IOU_SLCR_MIO_PIN_47_L1_SEL_MASK | IOU_SLCR_MIO_PIN_47_L2_SEL_MASK | IOU_SLCR_MIO_PIN_47_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_47_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_48 @ 0XFF1800C0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_48_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_48_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_48_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[22]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[22]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not U
+		ed
+		PSU_IOU_SLCR_MIO_PIN_48_L3_SEL                                                  0
+
+		Configures MIO Pin 48 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800C0, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_48_L0_SEL_MASK | IOU_SLCR_MIO_PIN_48_L1_SEL_MASK | IOU_SLCR_MIO_PIN_48_L2_SEL_MASK | IOU_SLCR_MIO_PIN_48_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_48_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_49 @ 0XFF1800C4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_49_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_49_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_data_in[3]- (8
+		bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_49_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[23]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[23]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_49_L3_SEL                                                  0
+
+		Configures MIO Pin 49 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800C4, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_49_L0_SEL_MASK | IOU_SLCR_MIO_PIN_49_L1_SEL_MASK | IOU_SLCR_MIO_PIN_49_L2_SEL_MASK | IOU_SLCR_MIO_PIN_49_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_49_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_50 @ 0XFF1800C8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
+		PSU_IOU_SLCR_MIO_PIN_50_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_50_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Input, sd1_c
+		d_in- (Command Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_50_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[24]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[24]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= ttc2, Input, ttc2
+		clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_50_L3_SEL                                                  0
+
+		Configures MIO Pin 50 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800C8, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_50_L0_SEL_MASK | IOU_SLCR_MIO_PIN_50_L1_SEL_MASK | IOU_SLCR_MIO_PIN_50_L2_SEL_MASK | IOU_SLCR_MIO_PIN_50_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_50_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_51 @ 0XFF1800CC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
+		PSU_IOU_SLCR_MIO_PIN_51_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_51_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Output, sdio1_clk_out- (SDSDIO clock) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_51_L2_SEL                                                  2
+
+		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[25]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[25]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= mdio1, Input, gem1_mdio_in- (MDIO Data) 4= mdio1, Outp
+		t, gem1_mdio_out- (MDIO Data) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter
+		serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_51_L3_SEL                                                  0
+
+		Configures MIO Pin 51 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800CC, 0x000000FEU ,0x00000010U)  
+		RegMask = (IOU_SLCR_MIO_PIN_51_L0_SEL_MASK | IOU_SLCR_MIO_PIN_51_L1_SEL_MASK | IOU_SLCR_MIO_PIN_51_L2_SEL_MASK | IOU_SLCR_MIO_PIN_51_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT
+			| 0x00000002U << IOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_51_OFFSET ,0x000000FEU ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_52 @ 0XFF1800D0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_52_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_clk_in- (ULPI Clock)
+		PSU_IOU_SLCR_MIO_PIN_52_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_52_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[0]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[0]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)
+		PSU_IOU_SLCR_MIO_PIN_52_L3_SEL                                                  0
+
+		Configures MIO Pin 52 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800D0, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_52_L0_SEL_MASK | IOU_SLCR_MIO_PIN_52_L1_SEL_MASK | IOU_SLCR_MIO_PIN_52_L2_SEL_MASK | IOU_SLCR_MIO_PIN_52_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_52_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_53 @ 0XFF1800D4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_53_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_dir- (Data bus direction control)
+		PSU_IOU_SLCR_MIO_PIN_53_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_53_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[1]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[1]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)
+		PSU_IOU_SLCR_MIO_PIN_53_L3_SEL                                                  0
+
+		Configures MIO Pin 53 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800D4, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_53_L0_SEL_MASK | IOU_SLCR_MIO_PIN_53_L1_SEL_MASK | IOU_SLCR_MIO_PIN_53_L2_SEL_MASK | IOU_SLCR_MIO_PIN_53_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_53_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_54 @ 0XFF1800D8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_54_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[2]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[2]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_54_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_54_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[2]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[2]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_54_L3_SEL                                                  0
+
+		Configures MIO Pin 54 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800D8, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_54_L0_SEL_MASK | IOU_SLCR_MIO_PIN_54_L1_SEL_MASK | IOU_SLCR_MIO_PIN_54_L2_SEL_MASK | IOU_SLCR_MIO_PIN_54_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_54_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_55 @ 0XFF1800DC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_55_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_nxt- (Data flow control signal from the PHY)
+		PSU_IOU_SLCR_MIO_PIN_55_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_55_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[3]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[3]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_55_L3_SEL                                                  0
+
+		Configures MIO Pin 55 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800DC, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_55_L0_SEL_MASK | IOU_SLCR_MIO_PIN_55_L1_SEL_MASK | IOU_SLCR_MIO_PIN_55_L2_SEL_MASK | IOU_SLCR_MIO_PIN_55_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_55_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_56 @ 0XFF1800E0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_56_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[0]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[0]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_56_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_56_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[4]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[4]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_56_L3_SEL                                                  0
+
+		Configures MIO Pin 56 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800E0, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_56_L0_SEL_MASK | IOU_SLCR_MIO_PIN_56_L1_SEL_MASK | IOU_SLCR_MIO_PIN_56_L2_SEL_MASK | IOU_SLCR_MIO_PIN_56_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_56_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_57 @ 0XFF1800E4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_57_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[1]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[1]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_57_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_57_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[5]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[5]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_57_L3_SEL                                                  0
+
+		Configures MIO Pin 57 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800E4, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_57_L0_SEL_MASK | IOU_SLCR_MIO_PIN_57_L1_SEL_MASK | IOU_SLCR_MIO_PIN_57_L2_SEL_MASK | IOU_SLCR_MIO_PIN_57_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_57_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_58 @ 0XFF1800E8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_58_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Output, usb0_ulpi_stp- (Asserted to end or interrupt transfers)
+		PSU_IOU_SLCR_MIO_PIN_58_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_58_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[6]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[6]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_58_L3_SEL                                                  0
+
+		Configures MIO Pin 58 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800E8, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_58_L0_SEL_MASK | IOU_SLCR_MIO_PIN_58_L1_SEL_MASK | IOU_SLCR_MIO_PIN_58_L2_SEL_MASK | IOU_SLCR_MIO_PIN_58_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_58_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_59 @ 0XFF1800EC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_59_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[3]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[3]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_59_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_59_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[7]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[7]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)
+		PSU_IOU_SLCR_MIO_PIN_59_L3_SEL                                                  0
+
+		Configures MIO Pin 59 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800EC, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_59_L0_SEL_MASK | IOU_SLCR_MIO_PIN_59_L1_SEL_MASK | IOU_SLCR_MIO_PIN_59_L2_SEL_MASK | IOU_SLCR_MIO_PIN_59_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_59_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_60 @ 0XFF1800F0

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_60_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[4]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[4]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_60_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_60_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[8]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[8]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_60_L3_SEL                                                  0
+
+		Configures MIO Pin 60 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800F0, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_60_L0_SEL_MASK | IOU_SLCR_MIO_PIN_60_L1_SEL_MASK | IOU_SLCR_MIO_PIN_60_L2_SEL_MASK | IOU_SLCR_MIO_PIN_60_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_60_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_61 @ 0XFF1800F4

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_61_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[5]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[5]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_61_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_61_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[9]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[9]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, Output, spi1_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_61_L3_SEL                                                  0
+
+		Configures MIO Pin 61 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800F4, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_61_L0_SEL_MASK | IOU_SLCR_MIO_PIN_61_L1_SEL_MASK | IOU_SLCR_MIO_PIN_61_L2_SEL_MASK | IOU_SLCR_MIO_PIN_61_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_61_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_62 @ 0XFF1800F8

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_62_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[6]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[6]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_62_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_62_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[10]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[10]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_62_L3_SEL                                                  0
+
+		Configures MIO Pin 62 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800F8, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_62_L0_SEL_MASK | IOU_SLCR_MIO_PIN_62_L1_SEL_MASK | IOU_SLCR_MIO_PIN_62_L2_SEL_MASK | IOU_SLCR_MIO_PIN_62_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_62_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_63 @ 0XFF1800FC

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_63_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[7]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[7]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_63_L1_SEL                                                  1
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_63_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[11]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[11]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_63_L3_SEL                                                  0
+
+		Configures MIO Pin 63 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF1800FC, 0x000000FEU ,0x00000004U)  
+		RegMask = (IOU_SLCR_MIO_PIN_63_L0_SEL_MASK | IOU_SLCR_MIO_PIN_63_L1_SEL_MASK | IOU_SLCR_MIO_PIN_63_L2_SEL_MASK | IOU_SLCR_MIO_PIN_63_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_63_OFFSET ,0x000000FEU ,0x00000004U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_64 @ 0XFF180100

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_clk- (TX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_64_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_clk_in- (ULPI Clock)
+		PSU_IOU_SLCR_MIO_PIN_64_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_64_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[12]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[12]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, s
+		i0_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 trace, Output, tracedq[10]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_64_L3_SEL                                                  0
+
+		Configures MIO Pin 64 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180100, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_64_L0_SEL_MASK | IOU_SLCR_MIO_PIN_64_L1_SEL_MASK | IOU_SLCR_MIO_PIN_64_L2_SEL_MASK | IOU_SLCR_MIO_PIN_64_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_64_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_65 @ 0XFF180104

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[0]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_65_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_dir- (Data bus direction control)
+		PSU_IOU_SLCR_MIO_PIN_65_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_65_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[13]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[13]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trac
+		dq[11]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_65_L3_SEL                                                  0
+
+		Configures MIO Pin 65 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180104, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_65_L0_SEL_MASK | IOU_SLCR_MIO_PIN_65_L1_SEL_MASK | IOU_SLCR_MIO_PIN_65_L2_SEL_MASK | IOU_SLCR_MIO_PIN_65_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_65_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_66 @ 0XFF180108

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[1]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_66_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[2]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[2]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_66_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_66_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[14]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[14]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= tt
+		2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace
+		Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_66_L3_SEL                                                  0
+
+		Configures MIO Pin 66 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180108, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_66_L0_SEL_MASK | IOU_SLCR_MIO_PIN_66_L1_SEL_MASK | IOU_SLCR_MIO_PIN_66_L2_SEL_MASK | IOU_SLCR_MIO_PIN_66_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_66_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_67 @ 0XFF18010C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[2]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_67_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_nxt- (Data flow control signal from the PHY)
+		PSU_IOU_SLCR_MIO_PIN_67_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_67_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[15]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[15]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi0_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_67_L3_SEL                                                  0
+
+		Configures MIO Pin 67 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18010C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_67_L0_SEL_MASK | IOU_SLCR_MIO_PIN_67_L1_SEL_MASK | IOU_SLCR_MIO_PIN_67_L2_SEL_MASK | IOU_SLCR_MIO_PIN_67_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_67_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_68 @ 0XFF180110

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[3]- (TX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_68_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[0]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[0]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_68_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= Not Used 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_68_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[16]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[16]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_68_L3_SEL                                                  0
+
+		Configures MIO Pin 68 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180110, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_68_L0_SEL_MASK | IOU_SLCR_MIO_PIN_68_L1_SEL_MASK | IOU_SLCR_MIO_PIN_68_L2_SEL_MASK | IOU_SLCR_MIO_PIN_68_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_68_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_69 @ 0XFF180114

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_ctl- (TX RGMII control)
+		PSU_IOU_SLCR_MIO_PIN_69_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[1]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[1]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_69_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_69_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[17]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[17]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)
+		PSU_IOU_SLCR_MIO_PIN_69_L3_SEL                                                  0
+
+		Configures MIO Pin 69 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180114, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_69_L0_SEL_MASK | IOU_SLCR_MIO_PIN_69_L1_SEL_MASK | IOU_SLCR_MIO_PIN_69_L2_SEL_MASK | IOU_SLCR_MIO_PIN_69_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_69_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_70 @ 0XFF180118

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_clk- (RX RGMII clock)
+		PSU_IOU_SLCR_MIO_PIN_70_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Output, usb1_ulpi_stp- (Asserted to end or interrupt transfers)
+		PSU_IOU_SLCR_MIO_PIN_70_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_70_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[18]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[18]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed
+		PSU_IOU_SLCR_MIO_PIN_70_L3_SEL                                                  0
+
+		Configures MIO Pin 70 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180118, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_70_L0_SEL_MASK | IOU_SLCR_MIO_PIN_70_L1_SEL_MASK | IOU_SLCR_MIO_PIN_70_L2_SEL_MASK | IOU_SLCR_MIO_PIN_70_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_70_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_71 @ 0XFF18011C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[0]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_71_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[3]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[3]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_71_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_71_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[19]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[19]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_71_L3_SEL                                                  0
+
+		Configures MIO Pin 71 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18011C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_71_L0_SEL_MASK | IOU_SLCR_MIO_PIN_71_L1_SEL_MASK | IOU_SLCR_MIO_PIN_71_L2_SEL_MASK | IOU_SLCR_MIO_PIN_71_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_71_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_72 @ 0XFF180120

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[1]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_72_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[4]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[4]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_72_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_72_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[20]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[20]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= N
+		t Used 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_72_L3_SEL                                                  0
+
+		Configures MIO Pin 72 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180120, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_72_L0_SEL_MASK | IOU_SLCR_MIO_PIN_72_L1_SEL_MASK | IOU_SLCR_MIO_PIN_72_L2_SEL_MASK | IOU_SLCR_MIO_PIN_72_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_72_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_73 @ 0XFF180124

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[2]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_73_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[5]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[5]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_73_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_73_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[21]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[21]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= Not Used 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_73_L3_SEL                                                  0
+
+		Configures MIO Pin 73 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180124, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_73_L0_SEL_MASK | IOU_SLCR_MIO_PIN_73_L1_SEL_MASK | IOU_SLCR_MIO_PIN_73_L2_SEL_MASK | IOU_SLCR_MIO_PIN_73_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_73_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_74 @ 0XFF180128

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[3]- (RX RGMII data)
+		PSU_IOU_SLCR_MIO_PIN_74_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[6]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[6]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_74_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[3]- (8-bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_74_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[22]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[22]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= Not Used 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_74_L3_SEL                                                  0
+
+		Configures MIO Pin 74 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180128, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_74_L0_SEL_MASK | IOU_SLCR_MIO_PIN_74_L1_SEL_MASK | IOU_SLCR_MIO_PIN_74_L2_SEL_MASK | IOU_SLCR_MIO_PIN_74_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_74_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_75 @ 0XFF18012C

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_ctl- (RX RGMII control )
+		PSU_IOU_SLCR_MIO_PIN_75_L0_SEL                                                  1
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[7]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[7]- (ULPI data bus)
+		PSU_IOU_SLCR_MIO_PIN_75_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_cmd_in- (Comma
+		d Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_75_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[23]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[23]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= Not Used 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_75_L3_SEL                                                  0
+
+		Configures MIO Pin 75 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF18012C, 0x000000FEU ,0x00000002U)  
+		RegMask = (IOU_SLCR_MIO_PIN_75_L0_SEL_MASK | IOU_SLCR_MIO_PIN_75_L1_SEL_MASK | IOU_SLCR_MIO_PIN_75_L2_SEL_MASK | IOU_SLCR_MIO_PIN_75_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_75_OFFSET ,0x000000FEU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_76 @ 0XFF180130

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Output, sdio
+		_clk_out- (SDSDIO clock) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[24]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[24]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= mdio0, Output, gem0_mdc- (MDIO Clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= mdio2, Output, gem2_mdc- (MDIO Clock
+		 6= mdio3, Output, gem3_mdc- (MDIO Clock) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_76_L3_SEL                                                  6
+
+		Configures MIO Pin 76 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180130, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_76_L0_SEL_MASK | IOU_SLCR_MIO_PIN_76_L1_SEL_MASK | IOU_SLCR_MIO_PIN_76_L2_SEL_MASK | IOU_SLCR_MIO_PIN_76_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_76_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_PIN_77 @ 0XFF180134

+
+		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L0_SEL                                                  0
+
+		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L1_SEL                                                  0
+
+		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L2_SEL                                                  0
+
+		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[25]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[25]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= mdio0, Input, gem0_mdio_in- (MDIO Data) 3= mdio0, Output, gem0_mdio_out- (MDIO Data) 4= mdio1, Input, gem1_mdio_in- (MD
+		O Data) 4= mdio1, Output, gem1_mdio_out- (MDIO Data) 5= mdio2, Input, gem2_mdio_in- (MDIO Data) 5= mdio2, Output, gem2_mdio_o
+		t- (MDIO Data) 6= mdio3, Input, gem3_mdio_in- (MDIO Data) 6= mdio3, Output, gem3_mdio_out- (MDIO Data) 7= Not Used
+		PSU_IOU_SLCR_MIO_PIN_77_L3_SEL                                                  6
+
+		Configures MIO Pin 77 peripheral interface mapping
+		(OFFSET, MASK, VALUE)      (0XFF180134, 0x000000FEU ,0x000000C0U)  
+		RegMask = (IOU_SLCR_MIO_PIN_77_L0_SEL_MASK | IOU_SLCR_MIO_PIN_77_L1_SEL_MASK | IOU_SLCR_MIO_PIN_77_L2_SEL_MASK | IOU_SLCR_MIO_PIN_77_L3_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT
+			| 0x00000006U << IOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_PIN_77_OFFSET ,0x000000FEU ,0x000000C0U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_MST_TRI0 @ 0XFF180204

+
+		Master Tri-state Enable for pin 0, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI                                            0
+
+		Master Tri-state Enable for pin 1, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI                                            0
+
+		Master Tri-state Enable for pin 2, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI                                            0
+
+		Master Tri-state Enable for pin 3, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI                                            0
+
+		Master Tri-state Enable for pin 4, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI                                            0
+
+		Master Tri-state Enable for pin 5, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI                                            0
+
+		Master Tri-state Enable for pin 6, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI                                            0
+
+		Master Tri-state Enable for pin 7, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI                                            0
+
+		Master Tri-state Enable for pin 8, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI                                            0
+
+		Master Tri-state Enable for pin 9, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI                                            0
+
+		Master Tri-state Enable for pin 10, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI                                            0
+
+		Master Tri-state Enable for pin 11, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI                                            0
+
+		Master Tri-state Enable for pin 12, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI                                            0
+
+		Master Tri-state Enable for pin 13, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI                                            0
+
+		Master Tri-state Enable for pin 14, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI                                            0
+
+		Master Tri-state Enable for pin 15, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI                                            0
+
+		Master Tri-state Enable for pin 16, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI                                            0
+
+		Master Tri-state Enable for pin 17, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI                                            0
+
+		Master Tri-state Enable for pin 18, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI                                            1
+
+		Master Tri-state Enable for pin 19, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI                                            0
+
+		Master Tri-state Enable for pin 20, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI                                            0
+
+		Master Tri-state Enable for pin 21, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI                                            1
+
+		Master Tri-state Enable for pin 22, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI                                            0
+
+		Master Tri-state Enable for pin 23, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI                                            0
+
+		Master Tri-state Enable for pin 24, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI                                            0
+
+		Master Tri-state Enable for pin 25, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI                                            1
+
+		Master Tri-state Enable for pin 26, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI                                            1
+
+		Master Tri-state Enable for pin 27, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI                                            0
+
+		Master Tri-state Enable for pin 28, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI                                            0
+
+		Master Tri-state Enable for pin 29, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI                                            0
+
+		Master Tri-state Enable for pin 30, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI                                            0
+
+		Master Tri-state Enable for pin 31, active high
+		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI                                            0
+
+		MIO pin Tri-state Enables, 31:0
+		(OFFSET, MASK, VALUE)      (0XFF180204, 0xFFFFFFFFU ,0x06240000U)  
+		RegMask = (IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI0_OFFSET ,0xFFFFFFFFU ,0x06240000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_MST_TRI1 @ 0XFF180208

+
+		Master Tri-state Enable for pin 32, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI                                            0
+
+		Master Tri-state Enable for pin 33, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI                                            0
+
+		Master Tri-state Enable for pin 34, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI                                            0
+
+		Master Tri-state Enable for pin 35, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI                                            0
+
+		Master Tri-state Enable for pin 36, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI                                            0
+
+		Master Tri-state Enable for pin 37, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI                                            0
+
+		Master Tri-state Enable for pin 38, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI                                            0
+
+		Master Tri-state Enable for pin 39, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI                                            0
+
+		Master Tri-state Enable for pin 40, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI                                            0
+
+		Master Tri-state Enable for pin 41, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI                                            0
+
+		Master Tri-state Enable for pin 42, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI                                            0
+
+		Master Tri-state Enable for pin 43, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI                                            0
+
+		Master Tri-state Enable for pin 44, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI                                            1
+
+		Master Tri-state Enable for pin 45, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI                                            1
+
+		Master Tri-state Enable for pin 46, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI                                            0
+
+		Master Tri-state Enable for pin 47, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI                                            0
+
+		Master Tri-state Enable for pin 48, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI                                            0
+
+		Master Tri-state Enable for pin 49, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI                                            0
+
+		Master Tri-state Enable for pin 50, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI                                            0
+
+		Master Tri-state Enable for pin 51, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI                                            0
+
+		Master Tri-state Enable for pin 52, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI                                            1
+
+		Master Tri-state Enable for pin 53, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI                                            1
+
+		Master Tri-state Enable for pin 54, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI                                            0
+
+		Master Tri-state Enable for pin 55, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI                                            1
+
+		Master Tri-state Enable for pin 56, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI                                            0
+
+		Master Tri-state Enable for pin 57, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI                                            0
+
+		Master Tri-state Enable for pin 58, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI                                            0
+
+		Master Tri-state Enable for pin 59, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI                                            0
+
+		Master Tri-state Enable for pin 60, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI                                            0
+
+		Master Tri-state Enable for pin 61, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI                                            0
+
+		Master Tri-state Enable for pin 62, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI                                            0
+
+		Master Tri-state Enable for pin 63, active high
+		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI                                            0
+
+		MIO pin Tri-state Enables, 63:32
+		(OFFSET, MASK, VALUE)      (0XFF180208, 0xFFFFFFFFU ,0x00B03000U)  
+		RegMask = (IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI1_OFFSET ,0xFFFFFFFFU ,0x00B03000U);
+	/*############################################################################################################################ */
+
+		/*Register : MIO_MST_TRI2 @ 0XFF18020C

+
+		Master Tri-state Enable for pin 64, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI                                            0
+
+		Master Tri-state Enable for pin 65, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI                                            0
+
+		Master Tri-state Enable for pin 66, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI                                            0
+
+		Master Tri-state Enable for pin 67, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI                                            0
+
+		Master Tri-state Enable for pin 68, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI                                            0
+
+		Master Tri-state Enable for pin 69, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI                                            0
+
+		Master Tri-state Enable for pin 70, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI                                            1
+
+		Master Tri-state Enable for pin 71, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI                                            1
+
+		Master Tri-state Enable for pin 72, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI                                            1
+
+		Master Tri-state Enable for pin 73, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI                                            1
+
+		Master Tri-state Enable for pin 74, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI                                            1
+
+		Master Tri-state Enable for pin 75, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI                                            1
+
+		Master Tri-state Enable for pin 76, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI                                            0
+
+		Master Tri-state Enable for pin 77, active high
+		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI                                            0
+
+		MIO pin Tri-state Enables, 77:64
+		(OFFSET, MASK, VALUE)      (0XFF18020C, 0x00003FFFU ,0x00000FC0U)  
+		RegMask = (IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT
+			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI2_OFFSET ,0x00003FFFU ,0x00000FC0U);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl0 @ 0XFF180138

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25                                          1
+
+		Drive0 control to MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180138, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl1 @ 0XFF18013C

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25                                          1
+
+		Drive1 control to MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF18013C, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl3 @ 0XFF180140

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		Selects either Schmitt or CMOS input for MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180140, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl4 @ 0XFF180144

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		When mio_bank0_pull_enable is set, this selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180144, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl5 @ 0XFF180148

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		When set, this enables mio_bank0_pullupdown to selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF180148, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank0_ctrl6 @ 0XFF18014C

+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[0].
+		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		Slew rate control to MIO Bank 0 - control MIO[25:0]
+		(OFFSET, MASK, VALUE)      (0XFF18014C, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl0 @ 0XFF180154

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25                                          1
+
+		Drive0 control to MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180154, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl1 @ 0XFF180158

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25                                          1
+
+		Drive1 control to MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180158, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl3 @ 0XFF18015C

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		Selects either Schmitt or CMOS input for MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF18015C, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl4 @ 0XFF180160

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		When mio_bank1_pull_enable is set, this selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180160, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl5 @ 0XFF180164

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		When set, this enables mio_bank1_pullupdown to selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180164, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank1_ctrl6 @ 0XFF180168

+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[26].
+		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		Slew rate control to MIO Bank 1 - control MIO[51:26]
+		(OFFSET, MASK, VALUE)      (0XFF180168, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl0 @ 0XFF180170

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25                                          1
+
+		Drive0 control to MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180170, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl1 @ 0XFF180174

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9                                           1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24                                          1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25                                          1
+
+		Drive1 control to MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180174, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl3 @ 0XFF180178

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0
+
+		Selects either Schmitt or CMOS input for MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180178, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl4 @ 0XFF18017C

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1
+
+		When mio_bank2_pull_enable is set, this selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF18017C, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl5 @ 0XFF180180

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9                                      1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24                                     1
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25                                     1
+
+		When set, this enables mio_bank2_pullupdown to selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180180, 0x03FFFFFFU ,0x03FFFFFFU)  
+		RegMask = (IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_SHIFT
+			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : bank2_ctrl6 @ 0XFF180184

+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0
+
+		Each bit applies to a single IO. Bit 0 for MIO[52].
+		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0
+
+		Slew rate control to MIO Bank 2 - control MIO[77:52]
+		(OFFSET, MASK, VALUE)      (0XFF180184, 0x03FFFFFFU ,0x00000000U)  
+		RegMask = (IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
+			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : LOOPBACK
+		/*Register : MIO_LOOPBACK @ 0XFF180200

+
+		I2C Loopback Control. 0 = Connect I2C inputs according to MIO mapping. 1 = Loop I2C 0 outputs to I2C 1 inputs, and I2C 1 outp
+		ts to I2C 0 inputs.
+		PSU_IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1                                        0
+
+		CAN Loopback Control. 0 = Connect CAN inputs according to MIO mapping. 1 = Loop CAN 0 Tx to CAN 1 Rx, and CAN 1 Tx to CAN 0 R
+		.
+		PSU_IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1                                        0
+
+		UART Loopback Control. 0 = Connect UART inputs according to MIO mapping. 1 = Loop UART 0 outputs to UART 1 inputs, and UART 1
+		outputs to UART 0 inputs. RXD/TXD cross-connected. RTS/CTS cross-connected. DSR, DTR, DCD and RI not used.
+		PSU_IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1                                          0
+
+		SPI Loopback Control. 0 = Connect SPI inputs according to MIO mapping. 1 = Loop SPI 0 outputs to SPI 1 inputs, and SPI 1 outp
+		ts to SPI 0 inputs. The other SPI core will appear on the LS Slave Select.
+		PSU_IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1                                        0
+
+		Loopback function within MIO
+		(OFFSET, MASK, VALUE)      (0XFF180200, 0x0000000FU ,0x00000000U)  
+		RegMask = (IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_MASK | IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_MASK | IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_MASK | IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_SHIFT
+			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_MIO_LOOPBACK_OFFSET ,0x0000000FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_peripherals_init_data() {
+		// : RESET BLOCKS
+		// : ENET
+		/*Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		GEM 3 reset
+		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0
+
+		Software controlled reset for the GEMs
+		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : QSPI
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_QSPI_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000001U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000001U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : NAND
+		// : USB
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 reset for control registers
+		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0
+
+		USB 0 sleep circuit reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0
+
+		USB 0 reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK | CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000540U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : FPD RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		PCIE config reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0
+
+		PCIE control block level reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0
+
+		PCIE bridge block level reset (AXI interface)
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0
+
+		Display Port block level reset (includes DPDMA)
+		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0
+
+		FPD WDT reset
+		PSU_CRF_APB_RST_FPD_TOP_SWDT_RESET                                              0
+
+		GDMA block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GDMA_RESET                                              0
+
+		Pixel Processor (submodule of GPU) block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GPU_PP0_RESET                                           0
+
+		Pixel Processor (submodule of GPU) block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GPU_PP1_RESET                                           0
+
+		GPU block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GPU_RESET                                               0
+
+		GT block level reset
+		PSU_CRF_APB_RST_FPD_TOP_GT_RESET                                                0
+
+		Sata block level reset
+		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000F807EU ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK | CRF_APB_RST_FPD_TOP_DP_RESET_MASK | CRF_APB_RST_FPD_TOP_SWDT_RESET_MASK | CRF_APB_RST_FPD_TOP_GDMA_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_RESET_MASK | CRF_APB_RST_FPD_TOP_GT_RESET_MASK | CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_SWDT_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GDMA_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_GT_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000F807EU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : SD
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_SDIO1_RESET                                            0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000040U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_SDIO1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_SDIO1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000040U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : CTRL_REG_SD @ 0XFF180310

+
+		SD or eMMC selection on SDIO1 0: SD enabled 1: eMMC enabled
+		PSU_IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL                                           0
+
+		SD eMMC selection
+		(OFFSET, MASK, VALUE)      (0XFF180310, 0x00008000U ,0x00000000U)  
+		RegMask = (IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_CTRL_REG_SD_OFFSET ,0x00008000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : SD_CONFIG_REG2 @ 0XFF180320

+
+		Should be set based on the final product usage 00 - Removable SCard Slot 01 - Embedded Slot for One Device 10 - Shared Bus Sl
+		t 11 - Reserved
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE                                        0
+
+		1.8V Support 1: 1.8V supported 0: 1.8V not supported support
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V                                            0
+
+		3.0V Support 1: 3.0V supported 0: 3.0V not supported support
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V                                            0
+
+		3.3V Support 1: 3.3V supported 0: 3.3V not supported support
+		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V                                            1
+
+		SD Config Register 2
+		(OFFSET, MASK, VALUE)      (0XFF180320, 0x33800000U ,0x00800000U)  
+		RegMask = (IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_MASK |  0 );
+
+		RegVal = ((0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_SHIFT
+			| 0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_SHIFT
+			| 0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_SHIFT
+			| 0x00000001U << IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG2_OFFSET ,0x33800000U ,0x00800000U);
+	/*############################################################################################################################ */
+
+		// : SD1 BASE CLOCK
+		/*Register : SD_CONFIG_REG1 @ 0XFF18031C

+
+		Base Clock Frequency for SD Clock. This is the frequency of the xin_clk.
+		PSU_IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK                                         0xc7
+
+		SD Config Register 1
+		(OFFSET, MASK, VALUE)      (0XFF18031C, 0x7F800000U ,0x63800000U)  
+		RegMask = (IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK |  0 );
+
+		RegVal = ((0x000000C7U << IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG1_OFFSET ,0x7F800000U ,0x63800000U);
+	/*############################################################################################################################ */
+
+		// : CAN
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_CAN1_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000100U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_CAN1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000100U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : I2C
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_I2C0_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_I2C1_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000600U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_I2C0_RESET_MASK | CRL_APB_RST_LPD_IOU2_I2C1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_I2C0_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_I2C1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000600U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : SWDT
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_SWDT_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00008000U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_SWDT_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_SWDT_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00008000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : SPI
+		// : TTC
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC0_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC1_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC2_RESET                                             0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_TTC3_RESET                                             0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00007800U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_TTC0_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC1_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC2_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_TTC0_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC1_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC2_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00007800U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : UART
+		/*Register : RST_LPD_IOU2 @ 0XFF5E0238

+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_UART0_RESET                                            0
+
+		Block level reset
+		PSU_CRL_APB_RST_LPD_IOU2_UART1_RESET                                            0
+
+		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
+		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000006U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU2_UART0_RESET_MASK | CRL_APB_RST_LPD_IOU2_UART1_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_UART0_RESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_IOU2_UART1_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000006U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : UART BAUD RATE
+		/*Register : Baud_rate_divider_reg0 @ 0XFF000034

+
+		Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
+		PSU_UART0_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5
+
+		Baud Rate Divider Register
+		(OFFSET, MASK, VALUE)      (0XFF000034, 0x000000FFU ,0x00000005U)  
+		RegMask = (UART0_BAUD_RATE_DIVIDER_REG0_BDIV_MASK |  0 );
+
+		RegVal = ((0x00000005U << UART0_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_BAUD_RATE_DIVIDER_REG0_OFFSET ,0x000000FFU ,0x00000005U);
+	/*############################################################################################################################ */
+
+		/*Register : Baud_rate_gen_reg0 @ 0XFF000018

+
+		Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
+		PSU_UART0_BAUD_RATE_GEN_REG0_CD                                                 0x8f
+
+		Baud Rate Generator Register.
+		(OFFSET, MASK, VALUE)      (0XFF000018, 0x0000FFFFU ,0x0000008FU)  
+		RegMask = (UART0_BAUD_RATE_GEN_REG0_CD_MASK |  0 );
+
+		RegVal = ((0x0000008FU << UART0_BAUD_RATE_GEN_REG0_CD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_BAUD_RATE_GEN_REG0_OFFSET ,0x0000FFFFU ,0x0000008FU);
+	/*############################################################################################################################ */
+
+		/*Register : Control_reg0 @ 0XFF000000

+
+		Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.
+		PSU_UART0_CONTROL_REG0_STPBRK                                                   0x0
+
+		Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
+		PSU_UART0_CONTROL_REG0_STTBRK                                                   0x0
+
+		Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.
+		PSU_UART0_CONTROL_REG0_RSTTO                                                    0x0
+
+		Transmit disable: 0: enable transmitter 1: disable transmitter
+		PSU_UART0_CONTROL_REG0_TXDIS                                                    0x0
+
+		Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
+		PSU_UART0_CONTROL_REG0_TXEN                                                     0x1
+
+		Receive disable: 0: enable 1: disable, regardless of the value of RXEN
+		PSU_UART0_CONTROL_REG0_RXDIS                                                    0x0
+
+		Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
+		PSU_UART0_CONTROL_REG0_RXEN                                                     0x1
+
+		Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.
+		PSU_UART0_CONTROL_REG0_TXRES                                                    0x1
+
+		Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.
+		PSU_UART0_CONTROL_REG0_RXRES                                                    0x1
+
+		UART Control Register
+		(OFFSET, MASK, VALUE)      (0XFF000000, 0x000001FFU ,0x00000017U)  
+		RegMask = (UART0_CONTROL_REG0_STPBRK_MASK | UART0_CONTROL_REG0_STTBRK_MASK | UART0_CONTROL_REG0_RSTTO_MASK | UART0_CONTROL_REG0_TXDIS_MASK | UART0_CONTROL_REG0_TXEN_MASK | UART0_CONTROL_REG0_RXDIS_MASK | UART0_CONTROL_REG0_RXEN_MASK | UART0_CONTROL_REG0_TXRES_MASK | UART0_CONTROL_REG0_RXRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART0_CONTROL_REG0_STPBRK_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_STTBRK_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_RSTTO_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_TXDIS_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_TXEN_SHIFT
+			| 0x00000000U << UART0_CONTROL_REG0_RXDIS_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_RXEN_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_TXRES_SHIFT
+			| 0x00000001U << UART0_CONTROL_REG0_RXRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_CONTROL_REG0_OFFSET ,0x000001FFU ,0x00000017U);
+	/*############################################################################################################################ */
+
+		/*Register : mode_reg0 @ 0XFF000004

+
+		Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
+		PSU_UART0_MODE_REG0_CHMODE                                                      0x0
+
+		Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved
+		PSU_UART0_MODE_REG0_NBSTOP                                                      0x0
+
+		Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
+		PSU_UART0_MODE_REG0_PAR                                                         0x4
+
+		Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
+		PSU_UART0_MODE_REG0_CHRL                                                        0x0
+
+		Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8
+		PSU_UART0_MODE_REG0_CLKS                                                        0x0
+
+		UART Mode Register
+		(OFFSET, MASK, VALUE)      (0XFF000004, 0x000003FFU ,0x00000020U)  
+		RegMask = (UART0_MODE_REG0_CHMODE_MASK | UART0_MODE_REG0_NBSTOP_MASK | UART0_MODE_REG0_PAR_MASK | UART0_MODE_REG0_CHRL_MASK | UART0_MODE_REG0_CLKS_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART0_MODE_REG0_CHMODE_SHIFT
+			| 0x00000000U << UART0_MODE_REG0_NBSTOP_SHIFT
+			| 0x00000004U << UART0_MODE_REG0_PAR_SHIFT
+			| 0x00000000U << UART0_MODE_REG0_CHRL_SHIFT
+			| 0x00000000U << UART0_MODE_REG0_CLKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART0_MODE_REG0_OFFSET ,0x000003FFU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : Baud_rate_divider_reg0 @ 0XFF010034

+
+		Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
+		PSU_UART1_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5
+
+		Baud Rate Divider Register
+		(OFFSET, MASK, VALUE)      (0XFF010034, 0x000000FFU ,0x00000005U)  
+		RegMask = (UART1_BAUD_RATE_DIVIDER_REG0_BDIV_MASK |  0 );
+
+		RegVal = ((0x00000005U << UART1_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_BAUD_RATE_DIVIDER_REG0_OFFSET ,0x000000FFU ,0x00000005U);
+	/*############################################################################################################################ */
+
+		/*Register : Baud_rate_gen_reg0 @ 0XFF010018

+
+		Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
+		PSU_UART1_BAUD_RATE_GEN_REG0_CD                                                 0x8f
+
+		Baud Rate Generator Register.
+		(OFFSET, MASK, VALUE)      (0XFF010018, 0x0000FFFFU ,0x0000008FU)  
+		RegMask = (UART1_BAUD_RATE_GEN_REG0_CD_MASK |  0 );
+
+		RegVal = ((0x0000008FU << UART1_BAUD_RATE_GEN_REG0_CD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_BAUD_RATE_GEN_REG0_OFFSET ,0x0000FFFFU ,0x0000008FU);
+	/*############################################################################################################################ */
+
+		/*Register : Control_reg0 @ 0XFF010000

+
+		Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.
+		PSU_UART1_CONTROL_REG0_STPBRK                                                   0x0
+
+		Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
+		PSU_UART1_CONTROL_REG0_STTBRK                                                   0x0
+
+		Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.
+		PSU_UART1_CONTROL_REG0_RSTTO                                                    0x0
+
+		Transmit disable: 0: enable transmitter 1: disable transmitter
+		PSU_UART1_CONTROL_REG0_TXDIS                                                    0x0
+
+		Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
+		PSU_UART1_CONTROL_REG0_TXEN                                                     0x1
+
+		Receive disable: 0: enable 1: disable, regardless of the value of RXEN
+		PSU_UART1_CONTROL_REG0_RXDIS                                                    0x0
+
+		Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
+		PSU_UART1_CONTROL_REG0_RXEN                                                     0x1
+
+		Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.
+		PSU_UART1_CONTROL_REG0_TXRES                                                    0x1
+
+		Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.
+		PSU_UART1_CONTROL_REG0_RXRES                                                    0x1
+
+		UART Control Register
+		(OFFSET, MASK, VALUE)      (0XFF010000, 0x000001FFU ,0x00000017U)  
+		RegMask = (UART1_CONTROL_REG0_STPBRK_MASK | UART1_CONTROL_REG0_STTBRK_MASK | UART1_CONTROL_REG0_RSTTO_MASK | UART1_CONTROL_REG0_TXDIS_MASK | UART1_CONTROL_REG0_TXEN_MASK | UART1_CONTROL_REG0_RXDIS_MASK | UART1_CONTROL_REG0_RXEN_MASK | UART1_CONTROL_REG0_TXRES_MASK | UART1_CONTROL_REG0_RXRES_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART1_CONTROL_REG0_STPBRK_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_STTBRK_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_RSTTO_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_TXDIS_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_TXEN_SHIFT
+			| 0x00000000U << UART1_CONTROL_REG0_RXDIS_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_RXEN_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_TXRES_SHIFT
+			| 0x00000001U << UART1_CONTROL_REG0_RXRES_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_CONTROL_REG0_OFFSET ,0x000001FFU ,0x00000017U);
+	/*############################################################################################################################ */
+
+		/*Register : mode_reg0 @ 0XFF010004

+
+		Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
+		PSU_UART1_MODE_REG0_CHMODE                                                      0x0
+
+		Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved
+		PSU_UART1_MODE_REG0_NBSTOP                                                      0x0
+
+		Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
+		PSU_UART1_MODE_REG0_PAR                                                         0x4
+
+		Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
+		PSU_UART1_MODE_REG0_CHRL                                                        0x0
+
+		Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8
+		PSU_UART1_MODE_REG0_CLKS                                                        0x0
+
+		UART Mode Register
+		(OFFSET, MASK, VALUE)      (0XFF010004, 0x000003FFU ,0x00000020U)  
+		RegMask = (UART1_MODE_REG0_CHMODE_MASK | UART1_MODE_REG0_NBSTOP_MASK | UART1_MODE_REG0_PAR_MASK | UART1_MODE_REG0_CHRL_MASK | UART1_MODE_REG0_CLKS_MASK |  0 );
+
+		RegVal = ((0x00000000U << UART1_MODE_REG0_CHMODE_SHIFT
+			| 0x00000000U << UART1_MODE_REG0_NBSTOP_SHIFT
+			| 0x00000004U << UART1_MODE_REG0_PAR_SHIFT
+			| 0x00000000U << UART1_MODE_REG0_CHRL_SHIFT
+			| 0x00000000U << UART1_MODE_REG0_CLKS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (UART1_MODE_REG0_OFFSET ,0x000003FFU ,0x00000020U);
+	/*############################################################################################################################ */
+
+		// : GPIO
+		// : ADMA TZ
+		/*Register : slcr_adma @ 0XFF4B0024

+
+		TrustZone Classification for ADMA
+		PSU_LPD_SLCR_SECURE_SLCR_ADMA_TZ                                                0XFF
+
+		RPU TrustZone settings
+		(OFFSET, MASK, VALUE)      (0XFF4B0024, 0x000000FFU ,0x000000FFU)  
+		RegMask = (LPD_SLCR_SECURE_SLCR_ADMA_TZ_MASK |  0 );
+
+		RegVal = ((0x000000FFU << LPD_SLCR_SECURE_SLCR_ADMA_TZ_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (LPD_SLCR_SECURE_SLCR_ADMA_OFFSET ,0x000000FFU ,0x000000FFU);
+	/*############################################################################################################################ */
+
+		// : CSU TAMPERING
+		// : CSU TAMPER STATUS
+		/*Register : tamper_status @ 0XFFCA5000

+
+		CSU regsiter
+		PSU_CSU_TAMPER_STATUS_TAMPER_0                                                  0
+
+		External MIO
+		PSU_CSU_TAMPER_STATUS_TAMPER_1                                                  0
+
+		JTAG toggle detect
+		PSU_CSU_TAMPER_STATUS_TAMPER_2                                                  0
+
+		PL SEU error
+		PSU_CSU_TAMPER_STATUS_TAMPER_3                                                  0
+
+		AMS over temperature alarm for LPD
+		PSU_CSU_TAMPER_STATUS_TAMPER_4                                                  0
+
+		AMS over temperature alarm for APU
+		PSU_CSU_TAMPER_STATUS_TAMPER_5                                                  0
+
+		AMS voltage alarm for VCCPINT_FPD
+		PSU_CSU_TAMPER_STATUS_TAMPER_6                                                  0
+
+		AMS voltage alarm for VCCPINT_LPD
+		PSU_CSU_TAMPER_STATUS_TAMPER_7                                                  0
+
+		AMS voltage alarm for VCCPAUX
+		PSU_CSU_TAMPER_STATUS_TAMPER_8                                                  0
+
+		AMS voltage alarm for DDRPHY
+		PSU_CSU_TAMPER_STATUS_TAMPER_9                                                  0
+
+		AMS voltage alarm for PSIO bank 0/1/2
+		PSU_CSU_TAMPER_STATUS_TAMPER_10                                                 0
+
+		AMS voltage alarm for PSIO bank 3 (dedicated pins)
+		PSU_CSU_TAMPER_STATUS_TAMPER_11                                                 0
+
+		AMS voltaage alarm for GT
+		PSU_CSU_TAMPER_STATUS_TAMPER_12                                                 0
+
+		Tamper Response Status
+		(OFFSET, MASK, VALUE)      (0XFFCA5000, 0x00001FFFU ,0x00000000U)  
+		RegMask = (CSU_TAMPER_STATUS_TAMPER_0_MASK | CSU_TAMPER_STATUS_TAMPER_1_MASK | CSU_TAMPER_STATUS_TAMPER_2_MASK | CSU_TAMPER_STATUS_TAMPER_3_MASK | CSU_TAMPER_STATUS_TAMPER_4_MASK | CSU_TAMPER_STATUS_TAMPER_5_MASK | CSU_TAMPER_STATUS_TAMPER_6_MASK | CSU_TAMPER_STATUS_TAMPER_7_MASK | CSU_TAMPER_STATUS_TAMPER_8_MASK | CSU_TAMPER_STATUS_TAMPER_9_MASK | CSU_TAMPER_STATUS_TAMPER_10_MASK | CSU_TAMPER_STATUS_TAMPER_11_MASK | CSU_TAMPER_STATUS_TAMPER_12_MASK |  0 );
+
+		RegVal = ((0x00000000U << CSU_TAMPER_STATUS_TAMPER_0_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_1_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_2_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_3_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_4_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_5_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_6_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_7_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_8_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_9_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_10_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_11_SHIFT
+			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_12_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CSU_TAMPER_STATUS_OFFSET ,0x00001FFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CSU TAMPER RESPONSE
+		// : AFIFM INTERFACE WIDTH
+		// : CPU QOS DEFAULT
+		/*Register : ACE_CTRL @ 0XFD5C0060

+
+		Set ACE outgoing AWQOS value
+		PSU_APU_ACE_CTRL_AWQOS                                                          0X0
+
+		Set ACE outgoing ARQOS value
+		PSU_APU_ACE_CTRL_ARQOS                                                          0X0
+
+		ACE Control Register
+		(OFFSET, MASK, VALUE)      (0XFD5C0060, 0x000F000FU ,0x00000000U)  
+		RegMask = (APU_ACE_CTRL_AWQOS_MASK | APU_ACE_CTRL_ARQOS_MASK |  0 );
+
+		RegVal = ((0x00000000U << APU_ACE_CTRL_AWQOS_SHIFT
+			| 0x00000000U << APU_ACE_CTRL_ARQOS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (APU_ACE_CTRL_OFFSET ,0x000F000FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : ENABLES RTC SWITCH TO BATTERY WHEN VCC_PSAUX IS NOT AVAILABLE
+		/*Register : CONTROL @ 0XFFA60040

+
+		Enables the RTC. By writing a 0 to this bit, RTC will be powered off and the only module that potentially draws current from 
+		he battery will be BBRAM. The value read through this bit does not necessarily reflect whether RTC is enabled or not. It is e
+		pected that RTC is enabled every time it is being configured. If RTC is not used in the design, FSBL will disable it by writi
+		g a 0 to this bit.
+		PSU_RTC_CONTROL_BATTERY_DISABLE                                                 0X1
+
+		This register controls various functionalities within the RTC
+		(OFFSET, MASK, VALUE)      (0XFFA60040, 0x80000000U ,0x80000000U)  
+		RegMask = (RTC_CONTROL_BATTERY_DISABLE_MASK |  0 );
+
+		RegVal = ((0x00000001U << RTC_CONTROL_BATTERY_DISABLE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (RTC_CONTROL_OFFSET ,0x80000000U ,0x80000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_post_config_data() {
+		// : POST_CONFIG
+
+  return 1;
+}
+unsigned long psu_peripherals_powerdwn_data() {
+		// : POWER DOWN REQUEST INTERRUPT ENABLE
+		// : POWER DOWN TRIGGER
+
+  return 1;
+}
+unsigned long psu_serdes_init_data() {
+		// : SERDES INITIALIZATION
+		// : GT REFERENCE CLOCK SOURCE SELECTION
+		/*Register : PLL_REF_SEL0 @ 0XFD410000

+
+		PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL0_PLLREFSEL0                                              0xD
+
+		PLL0 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD410000, 0x0000001FU ,0x0000000DU)  
+		RegMask = (SERDES_PLL_REF_SEL0_PLLREFSEL0_MASK |  0 );
+
+		RegVal = ((0x0000000DU << SERDES_PLL_REF_SEL0_PLLREFSEL0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL0_OFFSET ,0x0000001FU ,0x0000000DU);
+	/*############################################################################################################################ */
+
+		/*Register : PLL_REF_SEL1 @ 0XFD410004

+
+		PLL1 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL1_PLLREFSEL1                                              0x9
+
+		PLL1 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD410004, 0x0000001FU ,0x00000009U)  
+		RegMask = (SERDES_PLL_REF_SEL1_PLLREFSEL1_MASK |  0 );
+
+		RegVal = ((0x00000009U << SERDES_PLL_REF_SEL1_PLLREFSEL1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL1_OFFSET ,0x0000001FU ,0x00000009U);
+	/*############################################################################################################################ */
+
+		/*Register : PLL_REF_SEL2 @ 0XFD410008

+
+		PLL2 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL2_PLLREFSEL2                                              0x8
+
+		PLL2 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD410008, 0x0000001FU ,0x00000008U)  
+		RegMask = (SERDES_PLL_REF_SEL2_PLLREFSEL2_MASK |  0 );
+
+		RegVal = ((0x00000008U << SERDES_PLL_REF_SEL2_PLLREFSEL2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL2_OFFSET ,0x0000001FU ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : PLL_REF_SEL3 @ 0XFD41000C

+
+		PLL3 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
+		PSU_SERDES_PLL_REF_SEL3_PLLREFSEL3                                              0xF
+
+		PLL3 Reference Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD41000C, 0x0000001FU ,0x0000000FU)  
+		RegMask = (SERDES_PLL_REF_SEL3_PLLREFSEL3_MASK |  0 );
+
+		RegVal = ((0x0000000FU << SERDES_PLL_REF_SEL3_PLLREFSEL3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_PLL_REF_SEL3_OFFSET ,0x0000001FU ,0x0000000FU);
+	/*############################################################################################################################ */
+
+		// : GT REFERENCE CLOCK FREQUENCY SELECTION
+		/*Register : L0_L0_REF_CLK_SEL @ 0XFD402860

+
+		Sel of lane 0 ref clock local mux. Set to 1 to select lane 0 slicer output. Set to 0 to select lane0 ref clock mux output.
+		PSU_SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL                                 0x1
+
+		Lane0 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD402860, 0x00000080U ,0x00000080U)  
+		RegMask = (SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L0_REF_CLK_SEL_OFFSET ,0x00000080U ,0x00000080U);
+	/*############################################################################################################################ */
+
+		/*Register : L0_L1_REF_CLK_SEL @ 0XFD402864

+
+		Sel of lane 1 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane1 ref clock mux output.
+		PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL                                 0x0
+
+		Bit 3 of lane 1 ref clock mux one hot sel. Set to 1 to select lane 3 slicer output from ref clock network
+		PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3                                   0x1
+
+		Lane1 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD402864, 0x00000088U ,0x00000008U)  
+		RegMask = (SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_MASK | SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_SHIFT
+			| 0x00000001U << SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L1_REF_CLK_SEL_OFFSET ,0x00000088U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		/*Register : L0_L2_REF_CLK_SEL @ 0XFD402868

+
+		Sel of lane 2 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane2 ref clock mux output.
+		PSU_SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL                                 0x1
+
+		Lane2 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD402868, 0x00000080U ,0x00000080U)  
+		RegMask = (SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L2_REF_CLK_SEL_OFFSET ,0x00000080U ,0x00000080U);
+	/*############################################################################################################################ */
+
+		/*Register : L0_L3_REF_CLK_SEL @ 0XFD40286C

+
+		Sel of lane 3 ref clock local mux. Set to 1 to select lane 3 slicer output. Set to 0 to select lane3 ref clock mux output.
+		PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL                                 0x0
+
+		Bit 1 of lane 3 ref clock mux one hot sel. Set to 1 to select lane 1 slicer output from ref clock network
+		PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1                                   0x1
+
+		Lane3 Ref Clock Selection Register
+		(OFFSET, MASK, VALUE)      (0XFD40286C, 0x00000082U ,0x00000002U)  
+		RegMask = (SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_MASK | SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_SHIFT
+			| 0x00000001U << SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L0_L3_REF_CLK_SEL_OFFSET ,0x00000082U ,0x00000002U);
+	/*############################################################################################################################ */
+
+		// : ENABLE SPREAD SPECTRUM
+		/*Register : L2_TM_PLL_DIG_37 @ 0XFD40A094

+
+		Enable/Disable coarse code satureation limiting logic
+		PSU_SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION                         0x1
+
+		Test mode register 37
+		(OFFSET, MASK, VALUE)      (0XFD40A094, 0x00000010U ,0x00000010U)  
+		RegMask = (SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_TM_PLL_DIG_37_OFFSET ,0x00000010U ,0x00000010U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEPS_0_LSB @ 0XFD40A368

+
+		Spread Spectrum No of Steps [7:0]
+		PSU_SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x38
+
+		Spread Spectrum No of Steps bits 7:0
+		(OFFSET, MASK, VALUE)      (0XFD40A368, 0x000000FFU ,0x00000038U)  
+		RegMask = (SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000038U << SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000038U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEPS_1_MSB @ 0XFD40A36C

+
+		Spread Spectrum No of Steps [10:8]
+		PSU_SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x03
+
+		Spread Spectrum No of Steps bits 10:8
+		(OFFSET, MASK, VALUE)      (0XFD40A36C, 0x00000007U ,0x00000003U)  
+		RegMask = (SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );
+
+		RegVal = ((0x00000003U << SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEPS_0_LSB @ 0XFD40E368

+
+		Spread Spectrum No of Steps [7:0]
+		PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x0
+
+		Spread Spectrum No of Steps bits 7:0
+		(OFFSET, MASK, VALUE)      (0XFD40E368, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEPS_1_MSB @ 0XFD40E36C

+
+		Spread Spectrum No of Steps [10:8]
+		PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x0
+
+		Spread Spectrum No of Steps bits 10:8
+		(OFFSET, MASK, VALUE)      (0XFD40E36C, 0x00000007U ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEPS_0_LSB @ 0XFD406368

+
+		Spread Spectrum No of Steps [7:0]
+		PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x0
+
+		Spread Spectrum No of Steps bits 7:0
+		(OFFSET, MASK, VALUE)      (0XFD406368, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEPS_1_MSB @ 0XFD40636C

+
+		Spread Spectrum No of Steps [10:8]
+		PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x0
+
+		Spread Spectrum No of Steps bits 10:8
+		(OFFSET, MASK, VALUE)      (0XFD40636C, 0x00000007U ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_0_LSB @ 0XFD406370

+
+		Step Size for Spread Spectrum [7:0]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0x0
+
+		Step Size for Spread Spectrum LSB
+		(OFFSET, MASK, VALUE)      (0XFD406370, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_1 @ 0XFD406374

+
+		Step Size for Spread Spectrum [15:8]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x0
+
+		Step Size for Spread Spectrum 1
+		(OFFSET, MASK, VALUE)      (0XFD406374, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_2 @ 0XFD406378

+
+		Step Size for Spread Spectrum [23:16]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x0
+
+		Step Size for Spread Spectrum 2
+		(OFFSET, MASK, VALUE)      (0XFD406378, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40637C

+
+		Step Size for Spread Spectrum [25:24]
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		Enable/Disable test mode force on SS step size
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		Enable/Disable test mode force on SS no of steps
+		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		Enable force on enable Spread Spectrum
+		(OFFSET, MASK, VALUE)      (0XFD40637C, 0x00000033U ,0x00000030U)  
+		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
+			| 0x00000001U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
+			| 0x00000001U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x00000033U ,0x00000030U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40A370

+
+		Step Size for Spread Spectrum [7:0]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0xF4
+
+		Step Size for Spread Spectrum LSB
+		(OFFSET, MASK, VALUE)      (0XFD40A370, 0x000000FFU ,0x000000F4U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );
+
+		RegVal = ((0x000000F4U << SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x000000F4U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_1 @ 0XFD40A374

+
+		Step Size for Spread Spectrum [15:8]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x31
+
+		Step Size for Spread Spectrum 1
+		(OFFSET, MASK, VALUE)      (0XFD40A374, 0x000000FFU ,0x00000031U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );
+
+		RegVal = ((0x00000031U << SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000031U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_2 @ 0XFD40A378

+
+		Step Size for Spread Spectrum [23:16]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x2
+
+		Step Size for Spread Spectrum 2
+		(OFFSET, MASK, VALUE)      (0XFD40A378, 0x000000FFU ,0x00000002U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );
+
+		RegVal = ((0x00000002U << SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40A37C

+
+		Step Size for Spread Spectrum [25:24]
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		Enable/Disable test mode force on SS step size
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		Enable/Disable test mode force on SS no of steps
+		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		Enable force on enable Spread Spectrum
+		(OFFSET, MASK, VALUE)      (0XFD40A37C, 0x00000033U ,0x00000030U)  
+		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
+			| 0x00000001U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
+			| 0x00000001U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x00000033U ,0x00000030U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40E370

+
+		Step Size for Spread Spectrum [7:0]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0x0
+
+		Step Size for Spread Spectrum LSB
+		(OFFSET, MASK, VALUE)      (0XFD40E370, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_1 @ 0XFD40E374

+
+		Step Size for Spread Spectrum [15:8]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x0
+
+		Step Size for Spread Spectrum 1
+		(OFFSET, MASK, VALUE)      (0XFD40E374, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_2 @ 0XFD40E378

+
+		Step Size for Spread Spectrum [23:16]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x0
+
+		Step Size for Spread Spectrum 2
+		(OFFSET, MASK, VALUE)      (0XFD40E378, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40E37C

+
+		Step Size for Spread Spectrum [25:24]
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0
+
+		Enable/Disable test mode force on SS step size
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1
+
+		Enable/Disable test mode force on SS no of steps
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1
+
+		Enable test mode forcing on enable Spread Spectrum
+		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS                             0x1
+
+		Enable force on enable Spread Spectrum
+		(OFFSET, MASK, VALUE)      (0XFD40E37C, 0x000000B3U ,0x000000B0U)  
+		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
+			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
+			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
+			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x000000B3U ,0x000000B0U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_TM_DIG_6 @ 0XFD40906C

+
+		Bypass Descrambler
+		PSU_SERDES_L2_TM_DIG_6_BYPASS_DESCRAM                                           0x1
+
+		Enable Bypass for <1> TM_DIG_CTRL_6
+		PSU_SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1
+
+		Data path test modes in decoder and descram
+		(OFFSET, MASK, VALUE)      (0XFD40906C, 0x00000003U ,0x00000003U)  
+		RegMask = (SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_MASK | SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_SHIFT
+			| 0x00000001U << SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_TM_DIG_6_OFFSET ,0x00000003U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : L2_TX_DIG_TM_61 @ 0XFD4080F4

+
+		Bypass scrambler signal
+		PSU_SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1
+
+		Enable/disable scrambler bypass signal
+		PSU_SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1
+
+		MPHY PLL Gear and bypass scrambler
+		(OFFSET, MASK, VALUE)      (0XFD4080F4, 0x00000003U ,0x00000003U)  
+		RegMask = (SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_MASK | SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT
+			| 0x00000001U << SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L2_TX_DIG_TM_61_OFFSET ,0x00000003U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_PLL_FBDIV_FRAC_3_MSB @ 0XFD40E360

+
+		Enable test mode force on fractional mode enable
+		PSU_SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC                             0x1
+
+		Fractional feedback division control and fractional value for feedback division bits 26:24
+		(OFFSET, MASK, VALUE)      (0XFD40E360, 0x00000040U ,0x00000040U)  
+		RegMask = (SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_PLL_FBDIV_FRAC_3_MSB_OFFSET ,0x00000040U ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : L3_TM_DIG_6 @ 0XFD40D06C

+
+		Bypass 8b10b decoder
+		PSU_SERDES_L3_TM_DIG_6_BYPASS_DECODER                                           0x1
+
+		Enable Bypass for <3> TM_DIG_CTRL_6
+		PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC                                         0x1
+
+		Bypass Descrambler
+		PSU_SERDES_L3_TM_DIG_6_BYPASS_DESCRAM                                           0x1
+
+		Enable Bypass for <1> TM_DIG_CTRL_6
+		PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1
+
+		Data path test modes in decoder and descram
+		(OFFSET, MASK, VALUE)      (0XFD40D06C, 0x0000000FU ,0x0000000FU)  
+		RegMask = (SERDES_L3_TM_DIG_6_BYPASS_DECODER_MASK | SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_MASK | SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_MASK | SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L3_TM_DIG_6_BYPASS_DECODER_SHIFT
+			| 0x00000001U << SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_SHIFT
+			| 0x00000001U << SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_SHIFT
+			| 0x00000001U << SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_TM_DIG_6_OFFSET ,0x0000000FU ,0x0000000FU);
+	/*############################################################################################################################ */
+
+		/*Register : L3_TX_DIG_TM_61 @ 0XFD40C0F4

+
+		Enable/disable encoder bypass signal
+		PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_ENC                                           0x1
+
+		Bypass scrambler signal
+		PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1
+
+		Enable/disable scrambler bypass signal
+		PSU_SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1
+
+		MPHY PLL Gear and bypass scrambler
+		(OFFSET, MASK, VALUE)      (0XFD40C0F4, 0x0000000BU ,0x0000000BU)  
+		RegMask = (SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_MASK | SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_MASK | SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_SHIFT
+			| 0x00000001U << SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT
+			| 0x00000001U << SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_TX_DIG_TM_61_OFFSET ,0x0000000BU ,0x0000000BU);
+	/*############################################################################################################################ */
+
+		/*Register : L3_TXPMA_ST_0 @ 0XFD40CB00

+
+		PHY Mode: 4'b000 - PCIe, 4'b001 - USB3, 4'b0010 - SATA, 4'b0100 - SGMII, 4'b0101 - DP, 4'b1000 - MPHY
+		PSU_SERDES_L3_TXPMA_ST_0_TX_PHY_MODE                                            0x21
+
+		Opmode Info
+		(OFFSET, MASK, VALUE)      (0XFD40CB00, 0x000000F0U ,0x000000F0U)  
+		RegMask = (SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK |  0 );
+
+		RegVal = ((0x00000021U << SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L3_TXPMA_ST_0_OFFSET ,0x000000F0U ,0x000000F0U);
+	/*############################################################################################################################ */
+
+		// : GT LANE SETTINGS
+		/*Register : ICM_CFG0 @ 0XFD410010

+
+		Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse
+		, 7 - Unused
+		PSU_SERDES_ICM_CFG0_L0_ICM_CFG                                                  1
+
+		Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused
+		 7 - Unused
+		PSU_SERDES_ICM_CFG0_L1_ICM_CFG                                                  4
+
+		ICM Configuration Register 0
+		(OFFSET, MASK, VALUE)      (0XFD410010, 0x00000077U ,0x00000041U)  
+		RegMask = (SERDES_ICM_CFG0_L0_ICM_CFG_MASK | SERDES_ICM_CFG0_L1_ICM_CFG_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT
+			| 0x00000004U << SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_ICM_CFG0_OFFSET ,0x00000077U ,0x00000041U);
+	/*############################################################################################################################ */
+
+		/*Register : ICM_CFG1 @ 0XFD410014

+
+		Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused
+		 7 - Unused
+		PSU_SERDES_ICM_CFG1_L2_ICM_CFG                                                  3
+
+		Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused
+		 7 - Unused
+		PSU_SERDES_ICM_CFG1_L3_ICM_CFG                                                  2
+
+		ICM Configuration Register 1
+		(OFFSET, MASK, VALUE)      (0XFD410014, 0x00000077U ,0x00000023U)  
+		RegMask = (SERDES_ICM_CFG1_L2_ICM_CFG_MASK | SERDES_ICM_CFG1_L3_ICM_CFG_MASK |  0 );
+
+		RegVal = ((0x00000003U << SERDES_ICM_CFG1_L2_ICM_CFG_SHIFT
+			| 0x00000002U << SERDES_ICM_CFG1_L3_ICM_CFG_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_ICM_CFG1_OFFSET ,0x00000077U ,0x00000023U);
+	/*############################################################################################################################ */
+
+		// : CHECKING PLL LOCK
+		// : ENABLE SERIAL DATA MUX DEEMPH
+		/*Register : L1_TXPMD_TM_45 @ 0XFD404CB4

+
+		Enable/disable DP post2 path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH                         0x1
+
+		Override enable/disable of DP post2 path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH                    0x1
+
+		Override enable/disable of DP post1 path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH                    0x1
+
+		Enable/disable DP main path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH                          0x1
+
+		Override enable/disable of DP main path
+		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH                     0x1
+
+		Post or pre or main DP path selection
+		(OFFSET, MASK, VALUE)      (0XFD404CB4, 0x00000037U ,0x00000037U)  
+		RegMask = (SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT
+			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TXPMD_TM_45_OFFSET ,0x00000037U ,0x00000037U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_TX_ANA_TM_118 @ 0XFD4041D8

+
+		Test register force for enabling/disablign TX deemphasis bits <17:0>
+		PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0                                0x1
+
+		Enable Override of TX deemphasis
+		(OFFSET, MASK, VALUE)      (0XFD4041D8, 0x00000001U ,0x00000001U)  
+		RegMask = (SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK |  0 );
+
+		RegVal = ((0x00000001U << SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : ENABLE PRE EMPHAIS AND VOLTAGE SWING
+		/*Register : L1_TXPMD_TM_48 @ 0XFD404CC0

+
+		Margining factor value
+		PSU_SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR                         0
+
+		Margining factor
+		(OFFSET, MASK, VALUE)      (0XFD404CC0, 0x0000001FU ,0x00000000U)  
+		RegMask = (SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TXPMD_TM_48_OFFSET ,0x0000001FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : L1_TX_ANA_TM_18 @ 0XFD404048

+
+		pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved
+		PSU_SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0                                   0
+
+		Override for PIPE TX de-emphasis
+		(OFFSET, MASK, VALUE)      (0XFD404048, 0x000000FFU ,0x00000000U)  
+		RegMask = (SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK |  0 );
+
+		RegVal = ((0x00000000U << SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SERDES_L1_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_resetout_init_data() {
+		// : TAKING SERDES PERIPHERAL OUT OF RESET RESET
+		// : PUTTING USB0 IN RESET
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 reset for control registers
+		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X0
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000400U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000400U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : USB0 PIPE POWER PRESENT
+		/*Register : fpd_power_prsnt @ 0XFF9D0080

+
+		This bit is used to choose between PIPE power present and 1'b1
+		PSU_USB3_0_FPD_POWER_PRSNT_OPTION                                               0X1
+
+		fpd_power_prsnt
+		(OFFSET, MASK, VALUE)      (0XFF9D0080, 0x00000001U ,0x00000001U)  
+		RegMask = (USB3_0_FPD_POWER_PRSNT_OPTION_MASK |  0 );
+
+		RegVal = ((0x00000001U << USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (USB3_0_FPD_POWER_PRSNT_OFFSET ,0x00000001U ,0x00000001U);
+	/*############################################################################################################################ */
+
+		// : 
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 sleep circuit reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X0
+
+		USB 0 reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X0
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000140U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
+			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000140U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING GEM0 IN RESET
+		/*Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		GEM 3 reset
+		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X0
+
+		Software controlled reset for the GEMs
+		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  
+		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING SATA IN RESET
+		/*Register : sata_misc_ctrl @ 0XFD3D0100

+
+		Sata PM clock control select
+		PSU_SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL                                         0x3
+
+		Misc Contorls for SATA.This register may only be modified during bootup (while SATA block is disabled)
+		(OFFSET, MASK, VALUE)      (0XFD3D0100, 0x00000003U ,0x00000003U)  
+		RegMask = (SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_MASK |  0 );
+
+		RegVal = ((0x00000003U << SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (SIOU_SATA_MISC_CTRL_OFFSET ,0x00000003U ,0x00000003U);
+	/*############################################################################################################################ */
+
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Sata block level reset
+		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING PCIE IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		PCIE config reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X0
+
+		PCIE control block level reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X0
+
+		PCIE bridge block level reset (AXI interface)
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000E0000U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
+			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000E0000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING DP IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Display Port block level reset (includes DPDMA)
+		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X0
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00000000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_DP_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00010000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_PHY_RESET @ 0XFD4A0200

+
+		Set to '1' to hold the GT in reset. Clear to release.
+		PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X0
+
+		Reset the transmitter PHY.
+		(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000000U)  
+		RegMask = (DP_DP_PHY_RESET_GT_RESET_MASK |  0 );
+
+		RegVal = ((0x00000000U << DP_DP_PHY_RESET_GT_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_PHY_RESET_OFFSET ,0x00000002U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238

+
+		Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1
+		PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0X0
+
+		Control PHY Power down
+		(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x00000000U)  
+		RegMask = (DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK |  0 );
+
+		RegVal = ((0x00000000U << DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_TX_PHY_POWER_DOWN_OFFSET ,0x0000000FU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : USB0 GFLADJ
+		/*Register : GUSB2PHYCFG @ 0XFE20C200

+
+		USB 2.0 Turnaround Time (USBTrdTim) Sets the turnaround time in PHY clocks. Specifies the response time for a MAC request to 
+		he Packet FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). The following are the required values for the minimum S
+		C bus frequency of 60 MHz. USB turnaround time is a critical certification criteria when using long cables and five hub level
+		. The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit
+		UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger 
+		alue. Note: This field is valid only in device mode.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM                                           0X9
+
+		Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio
+		 of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the
+		time when the Transceiver Select is set to 2'b00 (HS) to the time the TxValid is driven to 0 for sending the chirp-K. This de
+		ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power
+		off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur
+		ng hibernation. - This bit is valid only in device mode.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY                                             0X0
+
+		Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen
+		_n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre
+		 to the external PHY. - 1'b1: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the external PHY. 
+		ote: This bit must be set high for Port0 if PHY is used. Note: In Device mode - Before issuing any device endpoint command wh
+		n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma
+		d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet
+		d.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM                                            0X0
+
+		USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P
+		Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 
+		'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte
+		 in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i
+		 active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL                                              0X0
+
+		Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co
+		figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app
+		ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F
+		r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s
+		t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati
+		g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi
+		 when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20                                        0X1
+
+		Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1
+		full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with 
+		ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U
+		B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF                                              0X0
+
+		ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa
+		e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons
+		ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s
+		lected through DWC_USB3_HSPHY_INTERFACE.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL                                       0X1
+
+		PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a
+		 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same 
+		lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen
+		 ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I
+		 any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz.
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF                                               0X0
+
+		HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by
+		a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for 
+		dditional delays introduced by the PHY. This may be required, since the delay introduced by the PHY in generating the linesta
+		e condition may vary among PHYs. The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times.
+		The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit times. The application must program this 
+		ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH
+		 clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One
+		60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times
+		PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL                                             0X7
+
+		Global USB2 PHY Configuration Register The application must program this register before starting any transactions on either 
+		he SoC bus or the USB. In Device-only configurations, only one register is needed. In Host mode, per-port registers are imple
+		ented.
+		(OFFSET, MASK, VALUE)      (0XFE20C200, 0x00003FFFU ,0x00002457U)  
+		RegMask = (USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK | USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK | USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK | USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK | USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK | USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK |  0 );
+
+		RegVal = ((0x00000009U << USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT
+			| 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT
+			| 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT
+			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT
+			| 0x00000007U << USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (USB3_0_XHCI_GUSB2PHYCFG_OFFSET ,0x00003FFFU ,0x00002457U);
+	/*############################################################################################################################ */
+
+		/*Register : GFLADJ @ 0XFE20C630

+
+		This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk. This register 
+		alue is used to adjust the ITP interval when GCTL[SOFITPSYNC] is set to '1'; SOF and ITP interval when GLADJ.GFLADJ_REFCLK_LP
+		_SEL is set to '1'. This field must be programmed to a non-zero value only if GFLADJ_REFCLK_LPM_SEL is set to '1' or GCTL.SOF
+		TPSYNC is set to '1'. The value is derived as follows: FLADJ_REF_CLK_FLADJ=((125000/ref_clk_period_integer)-(125000/ref_clk_p
+		riod)) * ref_clk_period where - the ref_clk_period_integer is the integer value of the ref_clk period got by truncating the d
+		cimal (fractional) value that is programmed in the GUCTL.REF_CLK_PERIOD field. - the ref_clk_period is the ref_clk period inc
+		uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ =
+		((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P
+		RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value)
+		PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ                                      0X0
+
+		Global Frame Length Adjustment Register This register provides options for the software to control the core behavior with res
+		ect to SOF (Start of Frame) and ITP (Isochronous Timestamp Packet) timers and frame timer functionality. It provides an optio
+		 to override the fladj_30mhz_reg sideband signal. In addition, it enables running SOF or ITP frame timer counters completely 
+		rom the ref_clk. This facilitates hardware LPM in host mode with the SOF or ITP counters being run from the ref_clk signal.
+		(OFFSET, MASK, VALUE)      (0XFE20C630, 0x003FFF00U ,0x00000000U)  
+		RegMask = (USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK |  0 );
+
+		RegVal = ((0x00000000U << USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (USB3_0_XHCI_GFLADJ_OFFSET ,0x003FFF00U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE0
+		/*Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD4023E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L0_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE1
+		/*Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD4063E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L1_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE2
+		/*Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD40A3E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L2_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : CHECK PLL LOCK FOR LANE3
+		/*Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

+
+		Status Read value of PLL Lock
+		PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
+		(OFFSET, MASK, VALUE)      (0XFD40E3E4, 0x00000010U ,0x00000010U)  */
+		mask_poll(SERDES_L3_PLL_STATUS_READ_1_OFFSET,0x00000010U);
+
+	/*############################################################################################################################ */
+
+		// : UPDATING TWO PCIE REGISTERS DEFAULT VALUES, AS THESE REGISTERS HAVE INCORRECT RESET VALUES IN SILICON.
+		/*Register : ATTR_37 @ 0XFD480094

+
+		Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r
+		gister.; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY                          0X1
+
+		ATTR_37
+		(OFFSET, MASK, VALUE)      (0XFD480094, 0x00004000U ,0x00004000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00004000U ,0x00004000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_25 @ 0XFD480064

+
+		If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root
+		ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED                      0X1
+
+		ATTR_25
+		(OFFSET, MASK, VALUE)      (0XFD480064, 0x00000200U ,0x00000200U)  
+		RegMask = (PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_25_OFFSET ,0x00000200U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		// : PCIE SETTINGS
+		/*Register : ATTR_7 @ 0XFD48001C

+
+		Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0x0004; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_7_ATTR_BAR0                                                0x0
+
+		ATTR_7
+		(OFFSET, MASK, VALUE)      (0XFD48001C, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_7_ATTR_BAR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_7_ATTR_BAR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_7_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_8 @ 0XFD480020

+
+		Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0xFFF0; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_8_ATTR_BAR0                                                0x0
+
+		ATTR_8
+		(OFFSET, MASK, VALUE)      (0XFD480020, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_8_ATTR_BAR0_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_8_ATTR_BAR0_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_8_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_9 @ 0XFD480024

+
+		Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_9_ATTR_BAR1                                                0x0
+
+		ATTR_9
+		(OFFSET, MASK, VALUE)      (0XFD480024, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_9_ATTR_BAR1_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_9_ATTR_BAR1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_9_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_10 @ 0XFD480028

+
+		Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_10_ATTR_BAR1                                               0x0
+
+		ATTR_10
+		(OFFSET, MASK, VALUE)      (0XFD480028, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_10_ATTR_BAR1_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_10_ATTR_BAR1_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_10_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_11 @ 0XFD48002C

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFFF
+		PSU_PCIE_ATTRIB_ATTR_11_ATTR_BAR2                                               0xFFFF
+
+		ATTR_11
+		(OFFSET, MASK, VALUE)      (0XFD48002C, 0x0000FFFFU ,0x0000FFFFU)  
+		RegMask = (PCIE_ATTRIB_ATTR_11_ATTR_BAR2_MASK |  0 );
+
+		RegVal = ((0x0000FFFFU << PCIE_ATTRIB_ATTR_11_ATTR_BAR2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_11_OFFSET ,0x0000FFFFU ,0x0000FFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_12 @ 0XFD480030

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0x00FF
+		PSU_PCIE_ATTRIB_ATTR_12_ATTR_BAR2                                               0xFF
+
+		ATTR_12
+		(OFFSET, MASK, VALUE)      (0XFD480030, 0x0000FFFFU ,0x000000FFU)  
+		RegMask = (PCIE_ATTRIB_ATTR_12_ATTR_BAR2_MASK |  0 );
+
+		RegVal = ((0x000000FFU << PCIE_ATTRIB_ATTR_12_ATTR_BAR2_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_12_OFFSET ,0x0000FFFFU ,0x000000FFU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_13 @ 0XFD480034

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_13_ATTR_BAR3                                               0x0
+
+		ATTR_13
+		(OFFSET, MASK, VALUE)      (0XFD480034, 0x0000FFFFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_13_ATTR_BAR3_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_13_ATTR_BAR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_13_OFFSET ,0x0000FFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_14 @ 0XFD480038

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFFF
+		PSU_PCIE_ATTRIB_ATTR_14_ATTR_BAR3                                               0xFFFF
+
+		ATTR_14
+		(OFFSET, MASK, VALUE)      (0XFD480038, 0x0000FFFFU ,0x0000FFFFU)  
+		RegMask = (PCIE_ATTRIB_ATTR_14_ATTR_BAR3_MASK |  0 );
+
+		RegVal = ((0x0000FFFFU << PCIE_ATTRIB_ATTR_14_ATTR_BAR3_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_14_OFFSET ,0x0000FFFFU ,0x0000FFFFU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_15 @ 0XFD48003C

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFF0
+		PSU_PCIE_ATTRIB_ATTR_15_ATTR_BAR4                                               0xFFF0
+
+		ATTR_15
+		(OFFSET, MASK, VALUE)      (0XFD48003C, 0x0000FFFFU ,0x0000FFF0U)  
+		RegMask = (PCIE_ATTRIB_ATTR_15_ATTR_BAR4_MASK |  0 );
+
+		RegVal = ((0x0000FFF0U << PCIE_ATTRIB_ATTR_15_ATTR_BAR4_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_15_OFFSET ,0x0000FFFFU ,0x0000FFF0U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_16 @ 0XFD480040

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0xFFF0
+		PSU_PCIE_ATTRIB_ATTR_16_ATTR_BAR4                                               0xFFF0
+
+		ATTR_16
+		(OFFSET, MASK, VALUE)      (0XFD480040, 0x0000FFFFU ,0x0000FFF0U)  
+		RegMask = (PCIE_ATTRIB_ATTR_16_ATTR_BAR4_MASK |  0 );
+
+		RegVal = ((0x0000FFF0U << PCIE_ATTRIB_ATTR_16_ATTR_BAR4_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_16_OFFSET ,0x0000FFFFU ,0x0000FFF0U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_17 @ 0XFD480044

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
+		PSU_PCIE_ATTRIB_ATTR_17_ATTR_BAR5                                               0xFFF1
+
+		ATTR_17
+		(OFFSET, MASK, VALUE)      (0XFD480044, 0x0000FFFFU ,0x0000FFF1U)  
+		RegMask = (PCIE_ATTRIB_ATTR_17_ATTR_BAR5_MASK |  0 );
+
+		RegVal = ((0x0000FFF1U << PCIE_ATTRIB_ATTR_17_ATTR_BAR5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_17_OFFSET ,0x0000FFFFU ,0x0000FFF1U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_18 @ 0XFD480048

+
+		For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
+		PSU_PCIE_ATTRIB_ATTR_18_ATTR_BAR5                                               0xFFF1
+
+		ATTR_18
+		(OFFSET, MASK, VALUE)      (0XFD480048, 0x0000FFFFU ,0x0000FFF1U)  
+		RegMask = (PCIE_ATTRIB_ATTR_18_ATTR_BAR5_MASK |  0 );
+
+		RegVal = ((0x0000FFF1U << PCIE_ATTRIB_ATTR_18_ATTR_BAR5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_18_OFFSET ,0x0000FFFFU ,0x0000FFF1U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_27 @ 0XFD48006C

+
+		Specifies maximum payload supported. Valid settings are: 0- 128 bytes, 1- 256 bytes, 2- 512 bytes, 3- 1024 bytes. Transferred
+		to the Device Capabilities register. The values: 4-2048 bytes, 5- 4096 bytes are not supported; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED                      1
+
+		Endpoint L1 Acceptable Latency. Records the latency that the endpoint can withstand on transitions from L1 state to L0 (if L1
+		state supported). Valid settings are: 0h less than 1us, 1h 1 to 2us, 2h 2 to 4us, 3h 4 to 8us, 4h 8 to 16us, 5h 16 to 32us, 6
+		 32 to 64us, 7h more than 64us. For Endpoints only. Must be 0h for other devices.; EP=0x0007; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY                        0x0
+
+		ATTR_27
+		(OFFSET, MASK, VALUE)      (0XFD48006C, 0x00000738U ,0x00000100U)  
+		RegMask = (PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_MASK | PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_27_OFFSET ,0x00000738U ,0x00000100U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_50 @ 0XFD4800C8

+
+		Identifies the type of device/port as follows: 0000b PCI Express Endpoint device, 0001b Legacy PCI Express Endpoint device, 0
+		00b Root Port of PCI Express Root Complex, 0101b Upstream Port of PCI Express Switch, 0110b Downstream Port of PCI Express Sw
+		tch, 0111b PCIE Express to PCI/PCI-X Bridge, 1000b PCI/PCI-X to PCI Express Bridge. Transferred to PCI Express Capabilities r
+		gister. Must be consistent with IS_SWITCH and UPSTREAM_FACING settings.; EP=0x0000; RP=0x0004
+		PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE                          4
+
+		PCIe Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capab
+		lity.; EP=0x009C; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR                                   0
+
+		ATTR_50
+		(OFFSET, MASK, VALUE)      (0XFD4800C8, 0x0000FFF0U ,0x00000040U)  
+		RegMask = (PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_MASK | PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_MASK |  0 );
+
+		RegVal = ((0x00000004U << PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_50_OFFSET ,0x0000FFF0U ,0x00000040U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_105 @ 0XFD4801A4

+
+		Number of credits that should be advertised for Completion data received on Virtual Channel 0. The bytes advertised must be l
+		ss than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0172; RP=0x00CD
+		PSU_PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD                              0xCD
+
+		ATTR_105
+		(OFFSET, MASK, VALUE)      (0XFD4801A4, 0x000007FFU ,0x000000CDU)  
+		RegMask = (PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_MASK |  0 );
+
+		RegVal = ((0x000000CDU << PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_105_OFFSET ,0x000007FFU ,0x000000CDU);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_106 @ 0XFD4801A8

+
+		Number of credits that should be advertised for Completion headers received on Virtual Channel 0. The sum of the posted, non 
+		osted, and completion header credits must be <= 80; EP=0x0048; RP=0x0024
+		PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH                              0x24
+
+		Number of credits that should be advertised for Non-Posted headers received on Virtual Channel 0. The number of non posted da
+		a credits advertised by the block is equal to the number of non posted header credits. The sum of the posted, non posted, and
+		completion header credits must be <= 80; EP=0x0004; RP=0x000C
+		PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH                             0xC
+
+		ATTR_106
+		(OFFSET, MASK, VALUE)      (0XFD4801A8, 0x00003FFFU ,0x00000624U)  
+		RegMask = (PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_MASK | PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_MASK |  0 );
+
+		RegVal = ((0x00000024U << PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_SHIFT
+			| 0x0000000CU << PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_106_OFFSET ,0x00003FFFU ,0x00000624U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_107 @ 0XFD4801AC

+
+		Number of credits that should be advertised for Non-Posted data received on Virtual Channel 0. The number of non posted data 
+		redits advertised by the block is equal to two times the number of non posted header credits if atomic operations are support
+		d or is equal to the number of non posted header credits if atomic operations are not supported. The bytes advertised must be
+		less than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0008; RP=0x0018
+		PSU_PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD                             0x18
+
+		ATTR_107
+		(OFFSET, MASK, VALUE)      (0XFD4801AC, 0x000007FFU ,0x00000018U)  
+		RegMask = (PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_MASK |  0 );
+
+		RegVal = ((0x00000018U << PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_107_OFFSET ,0x000007FFU ,0x00000018U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_108 @ 0XFD4801B0

+
+		Number of credits that should be advertised for Posted data received on Virtual Channel 0. The bytes advertised must be less 
+		han or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0020; RP=0x00B5
+		PSU_PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD                              0xB5
+
+		ATTR_108
+		(OFFSET, MASK, VALUE)      (0XFD4801B0, 0x000007FFU ,0x000000B5U)  
+		RegMask = (PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_MASK |  0 );
+
+		RegVal = ((0x000000B5U << PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_108_OFFSET ,0x000007FFU ,0x000000B5U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_109 @ 0XFD4801B4

+
+		Not currently in use. Invert ECRC generated by block when trn_tecrc_gen_n and trn_terrfwd_n are asserted.; EP=0x0000; RP=0x00
+		0
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV                                      0x0
+
+		Enables td bit clear and ECRC trim on received TLP's FALSE == don't trim TRUE == trim.; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM                                    0x1
+
+		Enables ECRC check on received TLP's 0 == don't check 1 == always check 3 == check if enabled by ECRC check enable bit of AER
+		cap structure; EP=0x0003; RP=0x0003
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK                                         0x3
+
+		Index of last packet buffer used by TX TLM (i.e. number of buffers - 1). Calculated from max payload size supported and the n
+		mber of brams configured for transmit; EP=0x001C; RP=0x001C
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET                                 0x1c
+
+		Number of credits that should be advertised for Posted headers received on Virtual Channel 0. The sum of the posted, non post
+		d, and completion header credits must be <= 80; EP=0x0004; RP=0x0020
+		PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH                              0x20
+
+		ATTR_109
+		(OFFSET, MASK, VALUE)      (0XFD4801B4, 0x0000FFFFU ,0x00007E20U)  
+		RegMask = (PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_MASK | PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_MASK | PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_MASK | PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_MASK | PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_SHIFT
+			| 0x00000001U << PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_SHIFT
+			| 0x00000003U << PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_SHIFT
+			| 0x0000001CU << PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_SHIFT
+			| 0x00000020U << PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_109_OFFSET ,0x0000FFFFU ,0x00007E20U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_34 @ 0XFD480088

+
+		Specifies values to be transferred to Header Type register. Bit 7 should be set to '0' indicating single-function device. Bit
+		0 identifies header as Type 0 or Type 1, with '0' indicating a Type 0 header.; EP=0x0000; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE                                        0x1
+
+		ATTR_34
+		(OFFSET, MASK, VALUE)      (0XFD480088, 0x000000FFU ,0x00000001U)  
+		RegMask = (PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_34_OFFSET ,0x000000FFU ,0x00000001U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_53 @ 0XFD4800D4

+
+		PM Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabil
+		ty.; EP=0x0048; RP=0x0060
+		PSU_PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR                                     0x60
+
+		ATTR_53
+		(OFFSET, MASK, VALUE)      (0XFD4800D4, 0x000000FFU ,0x00000060U)  
+		RegMask = (PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_MASK |  0 );
+
+		RegVal = ((0x00000060U << PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_53_OFFSET ,0x000000FFU ,0x00000060U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_41 @ 0XFD4800A4

+
+		MSI Per-Vector Masking Capable. The value is transferred to the MSI Control Register[8]. When set, adds Mask and Pending Dwor
+		 to Cap structure; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE                 0x0
+
+		Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0
+
+		MSI Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabi
+		ity.; EP=0x0060; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR                                    0x0
+
+		Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0
+
+		ATTR_41
+		(OFFSET, MASK, VALUE)      (0XFD4800A4, 0x000003FFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_41_OFFSET ,0x000003FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_97 @ 0XFD480184

+
+		Maximum Link Width. Valid settings are: 000001b x1, 000010b x2, 000100b x4, 001000b x8.; EP=0x0004; RP=0x0004
+		PSU_PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH                            0x1
+
+		Used by LTSSM to set Maximum Link Width. Valid settings are: 000001b [x1], 000010b [x2], 000100b [x4], 001000b [x8].; EP=0x00
+		4; RP=0x0004
+		PSU_PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH                               0x1
+
+		ATTR_97
+		(OFFSET, MASK, VALUE)      (0XFD480184, 0x00000FFFU ,0x00000041U)  
+		RegMask = (PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_MASK | PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_SHIFT
+			| 0x00000001U << PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_97_OFFSET ,0x00000FFFU ,0x00000041U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_100 @ 0XFD480190

+
+		TRUE specifies upstream-facing port. FALSE specifies downstream-facing port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING                                   0x0
+
+		ATTR_100
+		(OFFSET, MASK, VALUE)      (0XFD480190, 0x00000040U ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_100_OFFSET ,0x00000040U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_101 @ 0XFD480194

+
+		Enable the routing of message TLPs to the user through the TRN RX interface. A bit value of 1 enables routing of the message 
+		LP to the user. Messages are always decoded by the message decoder. Bit 0 - ERR COR, Bit 1 - ERR NONFATAL, Bit 2 - ERR FATAL,
+		Bit 3 - INTA Bit 4 - INTB, Bit 5 - INTC, Bit 6 - INTD, Bit 7 PM_PME, Bit 8 - PME_TO_ACK, Bit 9 - unlock, Bit 10 PME_Turn_Off;
+		EP=0x0000; RP=0x07FF
+		PSU_PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE                                  0x7FF
+
+		Disable BAR filtering. Does not change the behavior of the bar hit outputs; EP=0x0000; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING                             0x1
+
+		ATTR_101
+		(OFFSET, MASK, VALUE)      (0XFD480194, 0x0000FFE2U ,0x0000FFE2U)  
+		RegMask = (PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_MASK | PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_MASK |  0 );
+
+		RegVal = ((0x000007FFU << PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_SHIFT
+			| 0x00000001U << PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_101_OFFSET ,0x0000FFE2U ,0x0000FFE2U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_37 @ 0XFD480094

+
+		Link Bandwidth notification capability. Indicates support for the link bandwidth notification status and interrupt mechanism.
+		Required for Root.; EP=0x0000; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP           0x1
+
+		ATTR_37
+		(OFFSET, MASK, VALUE)      (0XFD480094, 0x00000200U ,0x00000200U)  
+		RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00000200U ,0x00000200U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_93 @ 0XFD480174

+
+		Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L
+		_REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN                               0x1
+
+		Sets a user-defined timeout for the Replay Timer to force cause the retransmission of unacknowledged TLPs; refer to LL_REPLAY
+		TIMEOUT_EN and LL_REPLAY_TIMEOUT_FUNC to see how this value is used. The unit for this attribute is in symbol times, which is
+		4ns at GEN1 speeds and 2ns at GEN2.; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT                                  0x1000
+
+		ATTR_93
+		(OFFSET, MASK, VALUE)      (0XFD480174, 0x0000FFFFU ,0x00009000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_MASK | PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_SHIFT
+			| 0x00001000U << PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_93_OFFSET ,0x0000FFFFU ,0x00009000U);
+	/*############################################################################################################################ */
+
+		/*Register : ID @ 0XFD480200

+
+		Device ID for the the PCIe Cap Structure Device ID field
+		PSU_PCIE_ATTRIB_ID_CFG_DEV_ID                                                   0xd021
+
+		Vendor ID for the PCIe Cap Structure Vendor ID field
+		PSU_PCIE_ATTRIB_ID_CFG_VEND_ID                                                  0x10ee
+
+		ID
+		(OFFSET, MASK, VALUE)      (0XFD480200, 0xFFFFFFFFU ,0x10EED021U)  
+		RegMask = (PCIE_ATTRIB_ID_CFG_DEV_ID_MASK | PCIE_ATTRIB_ID_CFG_VEND_ID_MASK |  0 );
+
+		RegVal = ((0x0000D021U << PCIE_ATTRIB_ID_CFG_DEV_ID_SHIFT
+			| 0x000010EEU << PCIE_ATTRIB_ID_CFG_VEND_ID_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ID_OFFSET ,0xFFFFFFFFU ,0x10EED021U);
+	/*############################################################################################################################ */
+
+		/*Register : SUBSYS_ID @ 0XFD480204

+
+		Subsystem ID for the the PCIe Cap Structure Subsystem ID field
+		PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID                                         0x7
+
+		Subsystem Vendor ID for the PCIe Cap Structure Subsystem Vendor ID field
+		PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID                                    0x10ee
+
+		SUBSYS_ID
+		(OFFSET, MASK, VALUE)      (0XFD480204, 0xFFFFFFFFU ,0x10EE0007U)  
+		RegMask = (PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_MASK | PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_MASK |  0 );
+
+		RegVal = ((0x00000007U << PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_SHIFT
+			| 0x000010EEU << PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_SUBSYS_ID_OFFSET ,0xFFFFFFFFU ,0x10EE0007U);
+	/*############################################################################################################################ */
+
+		/*Register : REV_ID @ 0XFD480208

+
+		Revision ID for the the PCIe Cap Structure
+		PSU_PCIE_ATTRIB_REV_ID_CFG_REV_ID                                               0x0
+
+		REV_ID
+		(OFFSET, MASK, VALUE)      (0XFD480208, 0x000000FFU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_REV_ID_CFG_REV_ID_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_REV_ID_CFG_REV_ID_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_REV_ID_OFFSET ,0x000000FFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_24 @ 0XFD480060

+
+		Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		8000; RP=0x8000
+		PSU_PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE                                         0x400
+
+		ATTR_24
+		(OFFSET, MASK, VALUE)      (0XFD480060, 0x0000FFFFU ,0x00000400U)  
+		RegMask = (PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_MASK |  0 );
+
+		RegVal = ((0x00000400U << PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_24_OFFSET ,0x0000FFFFU ,0x00000400U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_25 @ 0XFD480064

+
+		Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		0005; RP=0x0006
+		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE                                         0x6
+
+		INTX Interrupt Generation Capable. If FALSE, this will cause Command[10] to be hardwired to 0.; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED                               0
+
+		ATTR_25
+		(OFFSET, MASK, VALUE)      (0XFD480064, 0x000001FFU ,0x00000006U)  
+		RegMask = (PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_MASK | PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_MASK |  0 );
+
+		RegVal = ((0x00000006U << PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_25_OFFSET ,0x000001FFU ,0x00000006U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_4 @ 0XFD480010

+
+		Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0
+
+		Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001
+		PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0
+
+		ATTR_4
+		(OFFSET, MASK, VALUE)      (0XFD480010, 0x00001000U ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK | PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT
+			| 0x00000000U << PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_4_OFFSET ,0x00001000U ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_89 @ 0XFD480164

+
+		VSEC's Next Capability Offset pointer to the next item in the capabilities list, or 000h if this is the final capability.; EP
+		0x0140; RP=0x0140
+		PSU_PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR                                   0
+
+		ATTR_89
+		(OFFSET, MASK, VALUE)      (0XFD480164, 0x00001FFEU ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_89_OFFSET ,0x00001FFEU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_79 @ 0XFD48013C

+
+		CRS SW Visibility. Indicates RC can return CRS to SW. Transferred to the Root Capabilities register.; EP=0x0000; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY                         1
+
+		ATTR_79
+		(OFFSET, MASK, VALUE)      (0XFD48013C, 0x00000020U ,0x00000020U)  
+		RegMask = (PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_MASK |  0 );
+
+		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_79_OFFSET ,0x00000020U ,0x00000020U);
+	/*############################################################################################################################ */
+
+		/*Register : ATTR_43 @ 0XFD4800AC

+
+		Indicates that the MSIX structures exists. If this is FALSE, then the MSIX structure cannot be accessed via either the link o
+		 the management port.; EP=0x0001; RP=0x0000
+		PSU_PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON                                        0
+
+		ATTR_43
+		(OFFSET, MASK, VALUE)      (0XFD4800AC, 0x00000100U ,0x00000000U)  
+		RegMask = (PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK |  0 );
+
+		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PCIE_ATTRIB_ATTR_43_OFFSET ,0x00000100U ,0x00000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_resetin_init_data() {
+		// : PUTTING SERDES PERIPHERAL IN RESET
+		// : PUTTING USB0 IN RESET
+		/*Register : RST_LPD_TOP @ 0XFF5E023C

+
+		USB 0 reset for control registers
+		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X1
+
+		USB 0 sleep circuit reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X1
+
+		USB 0 reset
+		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X1
+
+		Software control register for the LPD block.
+		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000540U)  
+		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK | CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
+			| 0x00000001U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
+			| 0x00000001U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000540U ,0x00000540U);
+	/*############################################################################################################################ */
+
+		// : PUTTING GEM0 IN RESET
+		/*Register : RST_LPD_IOU0 @ 0XFF5E0230

+
+		GEM 3 reset
+		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X1
+
+		Software controlled reset for the GEMs
+		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000008U)  
+		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000008U);
+	/*############################################################################################################################ */
+
+		// : PUTTING SATA IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Sata block level reset
+		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X1
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000002U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000002U);
+	/*############################################################################################################################ */
+
+		// : PUTTING PCIE IN RESET
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		PCIE config reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X1
+
+		PCIE control block level reset
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X1
+
+		PCIE bridge block level reset (AXI interface)
+		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X1
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000E0000U ,0x000E0000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
+			| 0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
+			| 0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000E0000U ,0x000E0000U);
+	/*############################################################################################################################ */
+
+		// : PUTTING DP IN RESET
+		/*Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238

+
+		Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1
+		PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0XA
+
+		Control PHY Power down
+		(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x0000000AU)  
+		RegMask = (DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK |  0 );
+
+		RegVal = ((0x0000000AU << DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_TX_PHY_POWER_DOWN_OFFSET ,0x0000000FU ,0x0000000AU);
+	/*############################################################################################################################ */
+
+		/*Register : DP_PHY_RESET @ 0XFD4A0200

+
+		Set to '1' to hold the GT in reset. Clear to release.
+		PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X1
+
+		Reset the transmitter PHY.
+		(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000002U)  
+		RegMask = (DP_DP_PHY_RESET_GT_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << DP_DP_PHY_RESET_GT_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (DP_DP_PHY_RESET_OFFSET ,0x00000002U ,0x00000002U);
+	/*############################################################################################################################ */
+
+		/*Register : RST_FPD_TOP @ 0XFD1A0100

+
+		Display Port block level reset (includes DPDMA)
+		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X1
+
+		FPD Block level software controlled reset
+		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00010000U)  
+		RegMask = (CRF_APB_RST_FPD_TOP_DP_RESET_MASK |  0 );
+
+		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00010000U ,0x00010000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_ps_pl_isolation_removal_data() {
+		// : PS-PL POWER UP REQUEST
+		/*Register : REQ_PWRUP_INT_EN @ 0XFFD80118

+
+		Power-up Request Interrupt Enable for PL
+		PSU_PMU_GLOBAL_REQ_PWRUP_INT_EN_PL                                              1
+
+		Power-up Request Interrupt Enable Register. Writing a 1 to this location will unmask the interrupt.
+		(OFFSET, MASK, VALUE)      (0XFFD80118, 0x00800000U ,0x00800000U)  
+		RegMask = (PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_MASK |  0 );
+
+		RegVal = ((0x00000001U << PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PMU_GLOBAL_REQ_PWRUP_INT_EN_OFFSET ,0x00800000U ,0x00800000U);
+	/*############################################################################################################################ */
+
+		/*Register : REQ_PWRUP_TRIG @ 0XFFD80120

+
+		Power-up Request Trigger for PL
+		PSU_PMU_GLOBAL_REQ_PWRUP_TRIG_PL                                                1
+
+		Power-up Request Trigger Register. A write of one to this location will generate a power-up request to the PMU.
+		(OFFSET, MASK, VALUE)      (0XFFD80120, 0x00800000U ,0x00800000U)  
+		RegMask = (PMU_GLOBAL_REQ_PWRUP_TRIG_PL_MASK |  0 );
+
+		RegVal = ((0x00000001U << PMU_GLOBAL_REQ_PWRUP_TRIG_PL_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (PMU_GLOBAL_REQ_PWRUP_TRIG_OFFSET ,0x00800000U ,0x00800000U);
+	/*############################################################################################################################ */
+
+		// : POLL ON PL POWER STATUS
+		/*Register : REQ_PWRUP_STATUS @ 0XFFD80110

+
+		Power-up Request Status for PL
+		PSU_PMU_GLOBAL_REQ_PWRUP_STATUS_PL                                              1
+		(OFFSET, MASK, VALUE)      (0XFFD80110, 0x00800000U ,0x00000000U)  */
+		mask_pollOnValue(PMU_GLOBAL_REQ_PWRUP_STATUS_OFFSET,0x00800000U,0x00000000U);
+
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+unsigned long psu_ps_pl_reset_config_data() {
+		// : PS PL RESET SEQUENCE
+		// : FABRIC RESET USING EMIO
+		/*Register : MASK_DATA_5_MSW @ 0XFF0A002C

+
+		Operation is the same as MASK_DATA_0_LSW[MASK_0_LSW]
+		PSU_GPIO_MASK_DATA_5_MSW_MASK_5_MSW                                             0x8000
+
+		Maskable Output Data (GPIO Bank5, EMIO, Upper 16bits)
+		(OFFSET, MASK, VALUE)      (0XFF0A002C, 0xFFFF0000U ,0x80000000U)  
+		RegMask = (GPIO_MASK_DATA_5_MSW_MASK_5_MSW_MASK |  0 );
+
+		RegVal = ((0x00008000U << GPIO_MASK_DATA_5_MSW_MASK_5_MSW_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_MASK_DATA_5_MSW_OFFSET ,0xFFFF0000U ,0x80000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DIRM_5 @ 0XFF0A0344

+
+		Operation is the same as DIRM_0[DIRECTION_0]
+		PSU_GPIO_DIRM_5_DIRECTION_5                                                     0x80000000
+
+		Direction mode (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0344, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_DIRM_5_DIRECTION_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_DIRM_5_DIRECTION_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DIRM_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+		/*Register : OEN_5 @ 0XFF0A0348

+
+		Operation is the same as OEN_0[OP_ENABLE_0]
+		PSU_GPIO_OEN_5_OP_ENABLE_5                                                      0x80000000
+
+		Output enable (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0348, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_OEN_5_OP_ENABLE_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_OEN_5_OP_ENABLE_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_OEN_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+		/*Register : DATA_5 @ 0XFF0A0054

+
+		Output Data
+		PSU_GPIO_DATA_5_DATA_5                                                          0x80000000
+
+		Output Data (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_DATA_5_DATA_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+		mask_delay(1);
+
+	/*############################################################################################################################ */
+
+		// : FABRIC RESET USING DATA_5 TOGGLE
+		/*Register : DATA_5 @ 0XFF0A0054

+
+		Output Data
+		PSU_GPIO_DATA_5_DATA_5                                                          0X00000000
+
+		Output Data (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x00000000U)  
+		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );
+
+		RegVal = ((0x00000000U << GPIO_DATA_5_DATA_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x00000000U);
+	/*############################################################################################################################ */
+
+		mask_delay(1);
+
+	/*############################################################################################################################ */
+
+		// : FABRIC RESET USING DATA_5 TOGGLE
+		/*Register : DATA_5 @ 0XFF0A0054

+
+		Output Data
+		PSU_GPIO_DATA_5_DATA_5                                                          0x80000000
+
+		Output Data (GPIO Bank5, EMIO)
+		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  
+		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );
+
+		RegVal = ((0x80000000U << GPIO_DATA_5_DATA_5_SHIFT
+			|  0 ) & RegMask); */
+		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
+	/*############################################################################################################################ */
+
+
+  return 1;
+}
+
+unsigned long psu_ddr_phybringup_data() {
+
+
+		unsigned int regval = 0;
+	Xil_Out32(0xFD090000U, 0x0000A845U);
+	Xil_Out32(0xFD090004U, 0x003FFFFFU);
+	Xil_Out32(0xFD09000CU, 0x00000010U);
+	Xil_Out32(0xFD090010U, 0x00000010U);
+	// PHY BRINGUP SEQ
+	while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000000FU);
+	prog_reg (0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U);
+	//poll for PHY initialization to complete 
+	while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU);
+	
+	Xil_Out32(0xFD0701B0U, 0x00000001U);
+	Xil_Out32(0xFD070320U, 0x00000001U);
+	while ((Xil_In32(0xFD070004U) & 0x0000000FU) != 0x00000001U);
+	prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U);
+	 Xil_Out32(0xFD080004, 0x0004FE01); //PUB_PIR  
+	  regval = Xil_In32(0xFD080030); //PUB_PGSR0
+	  while(regval != 0x80000FFF){   
+	     regval = Xil_In32(0xFD080030); //PUB_PGSR0 
+	  } 
+
+	
+ // Run Vref training in static read mode  
+	Xil_Out32(0xFD080200U, 0x110011C7U);
+	Xil_Out32(0xFD080018U, 0x00F01EF2U);
+	Xil_Out32(0xFD08001CU, 0x55AA0098U);
+	Xil_Out32(0xFD08142CU, 0x00001830U);
+	Xil_Out32(0xFD08146CU, 0x00001830U);
+	Xil_Out32(0xFD0814ACU, 0x00001830U);
+	Xil_Out32(0xFD0814ECU, 0x00001830U);
+	Xil_Out32(0xFD08152CU, 0x00001830U);
+	 
+
+	 Xil_Out32(0xFD080004, 0x00060001); //PUB_PIR  
+	  regval = Xil_In32(0xFD080030); //PUB_PGSR0
+	  while((regval & 0x80004001) != 0x80004001){   
+	     regval = Xil_In32(0xFD080030); //PUB_PGSR0 
+	  } 
+
+	 // Vref training is complete, disabling static read mode 
+	Xil_Out32(0xFD080200U, 0x810011C7U);
+	Xil_Out32(0xFD080018U, 0x00F12302U);
+	Xil_Out32(0xFD08001CU, 0x55AA0080U);
+	Xil_Out32(0xFD08142CU, 0x00001800U);
+	Xil_Out32(0xFD08146CU, 0x00001800U);
+	Xil_Out32(0xFD0814ACU, 0x00001800U);
+	Xil_Out32(0xFD0814ECU, 0x00001800U);
+	Xil_Out32(0xFD08152CU, 0x00001800U);
+	Xil_Out32(0xFD070180U, 0x01000040U);
+	Xil_Out32(0xFD070060U, 0x00000000U);
+	prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U);
+
+return 1; 
+}
+
+/**
+ * CRL_APB Base Address
+ */
+#define CRL_APB_BASEADDR      0XFF5E0000U
+#define CRL_APB_RST_LPD_IOU0    ( ( CRL_APB_BASEADDR ) + 0X00000230U )
+#define CRL_APB_RST_LPD_IOU1    ( ( CRL_APB_BASEADDR ) + 0X00000234U )
+#define CRL_APB_RST_LPD_IOU2    ( ( CRL_APB_BASEADDR ) + 0X00000238U )
+#define CRL_APB_RST_LPD_TOP    ( ( CRL_APB_BASEADDR ) + 0X0000023CU )
+#define CRL_APB_IOU_SWITCH_CTRL    ( ( CRL_APB_BASEADDR ) + 0X0000009CU )
+
+/**
+ * CRF_APB Base Address
+ */
+#define CRF_APB_BASEADDR      0XFD1A0000U
+
+#define CRF_APB_RST_FPD_TOP    ( ( CRF_APB_BASEADDR ) + 0X00000100U )
+#define CRF_APB_GPU_REF_CTRL    ( ( CRF_APB_BASEADDR ) + 0X00000084U )
+#define CRF_APB_RST_DDR_SS    ( ( CRF_APB_BASEADDR ) + 0X00000108U )
+#define PSU_MASK_POLL_TIME 1100000
+
+
+int mask_pollOnValue(u32 add , u32 mask, u32 value ) {
+	volatile u32 *addr = (volatile u32*) add;
+	int i = 0;
+	while ((*addr & mask)!= value) {
+		if (i == PSU_MASK_POLL_TIME) {
+			return 0;
+		}
+		i++;
+	}
+	return 1;   
+	//xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr);
+}
+
+int mask_poll(u32 add , u32 mask) {
+	volatile u32 *addr = (volatile u32*) add;
+	int i = 0;
+	while (!(*addr & mask)) {
+		if (i == PSU_MASK_POLL_TIME) {
+			return 0;
+		}
+		i++;
+	}
+	return 1;   
+	//xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr);
+}
+
+void mask_delay(u32 delay) {
+    usleep (delay);
+}
+
+u32 mask_read(u32 add , u32 mask ) {
+        volatile u32 *addr = (volatile u32*) add;
+        u32 val = (*addr & mask);
+        //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val);
+        return val;
+}
+
+
+//Following SERDES programming sequences that a user need to follow to work around the known limitation with SERDES. 
+//These sequences should done before STEP 1 and STEP 2 as described in previous section. These programming steps are
+//required for current silicon version and are likely to undergo further changes with subsequent silicon versions.
+
+
+
+int serdes_fixcal_code() {
+	int MaskStatus = 1;
+
+   // L3_TM_CALIB_DIG19
+   Xil_Out32(0xFD40EC4C,0x00000020);
+   //ICM_CFG0
+   Xil_Out32(0xFD410010,0x00000001);
+
+   //is calibration done, polling on L3_CALIB_DONE_STATUS
+   MaskStatus = mask_poll(0xFD40EF14, 0x2);
+   
+   if (MaskStatus == 0)
+   {
+        xil_printf("SERDES initialization timed out\n\r");
+   }
+ 
+   unsigned int tmp_0_1; 
+   tmp_0_1 = mask_read(0xFD400B0C, 0x3F);
+   
+   unsigned int tmp_0_2 = tmp_0_1 & (0x7); 
+   unsigned int tmp_0_3 = tmp_0_1 & (0x38);
+   //Configure ICM for de-asserting CMN_Resetn
+   Xil_Out32(0xFD410010,0x00000000);
+   Xil_Out32(0xFD410014,0x00000000);
+   
+   unsigned int tmp_0_2_mod = (tmp_0_2 <<1) | (0x1); 
+   tmp_0_2_mod = (tmp_0_2_mod <<4); 
+   
+   tmp_0_3 = tmp_0_3 >>3;
+   Xil_Out32(0xFD40EC4C,tmp_0_3);
+
+   //L3_TM_CALIB_DIG18
+   Xil_Out32(0xFD40EC48,tmp_0_2_mod);
+   return MaskStatus;
+
+
+}
+
+int serdes_enb_coarse_saturation() {
+  //Enable PLL Coarse Code saturation Logic
+   Xil_Out32(0xFD402094,0x00000010); 
+   Xil_Out32(0xFD406094,0x00000010); 
+   Xil_Out32(0xFD40A094,0x00000010); 
+   Xil_Out32(0xFD40E094,0x00000010);
+   return 1;
+}
+
+int init_serdes() {
+	int status = 1;
+	status &=  psu_resetin_init_data();
+
+	status &= serdes_fixcal_code();
+	status &= serdes_enb_coarse_saturation();
+
+    status &=  psu_serdes_init_data();
+	status &=  psu_resetout_init_data();
+
+	return status;
+}
+
+
+
+
+
+
+void init_peripheral()
+{
+	unsigned int RegValue;
+
+	/* Turn on IOU Clock */
+	//Xil_Out32( CRL_APB_IOU_SWITCH_CTRL, 0x01001500);
+
+	/* Release all resets in the IOU */
+	Xil_Out32( CRL_APB_RST_LPD_IOU0, 0x00000000);
+	Xil_Out32( CRL_APB_RST_LPD_IOU1, 0x00000000);
+	Xil_Out32( CRL_APB_RST_LPD_IOU2, 0x00000000);
+
+	/* Activate GPU clocks */
+	//Xil_Out32(CRF_APB_GPU_REF_CTRL, 0x07001500);
+
+	/* Take LPD out of reset except R5 */
+	RegValue = Xil_In32(CRL_APB_RST_LPD_TOP);
+	RegValue &= 0x7;
+	Xil_Out32( CRL_APB_RST_LPD_TOP, RegValue);
+
+	/* Take most of FPD out of reset */
+	Xil_Out32( CRF_APB_RST_FPD_TOP, 0x00000000);
+
+	/* Making DPDMA as secure */
+  unsigned int tmp_regval; 
+  tmp_regval = Xil_In32(0xFD690040);
+  tmp_regval &= ~0x00000001;
+  Xil_Out32(0xFD690040, tmp_regval);
+
+	/* Making PCIe as secure */
+  tmp_regval = Xil_In32(0xFD690030);
+  tmp_regval &= ~0x00000001;
+  Xil_Out32(0xFD690030, tmp_regval);
+}
+int
+psu_init() 
+{
+	int status = 1; 
+	status &= psu_mio_init_data ();
+	status &=   psu_pll_init_data ();
+	status &=   psu_clock_init_data ();
+
+	status &=  psu_ddr_init_data ();
+	status &=  psu_ddr_phybringup_data ();
+	status &=  psu_peripherals_init_data ();
+
+	status &=  init_serdes();
+	init_peripheral ();
+
+	status &=  psu_peripherals_powerdwn_data ();
+   
+	if (status == 0) {
+		return 1;
+	}
+	return 0;
+}
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.h
new file mode 100644
index 000000000..ae33f880c
--- /dev/null
+++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.h
@@ -0,0 +1,26148 @@
+/******************************************************************************
+*
+* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
+* 
+*  This program is free software; you can redistribute it and/or modify
+*  it under the terms of the GNU General Public License as published by
+*  the Free Software Foundation; either version 2 of the License, or
+*  (at your option) any later version.
+*
+*  This program is distributed in the hope that it will be useful,
+*  but WITHOUT ANY WARRANTY; without even the implied warranty of
+*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+*  GNU General Public License for more details.
+* 
+*  You should have received a copy of the GNU General Public License along
+*  with this program; if not, see 
+* 
+* 
+******************************************************************************/ 
+/****************************************************************************/
+/**
+*
+* @file psu_init_gpl.h
+*
+* This file is automatically generated 
+*
+*****************************************************************************/
+
+
+#undef CRL_APB_RPLL_CFG_OFFSET 
+#define CRL_APB_RPLL_CFG_OFFSET                                                    0XFF5E0034
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_CTRL_OFFSET 
+#define CRL_APB_RPLL_CTRL_OFFSET                                                   0XFF5E0030
+#undef CRL_APB_RPLL_TO_FPD_CTRL_OFFSET 
+#define CRL_APB_RPLL_TO_FPD_CTRL_OFFSET                                            0XFF5E0048
+#undef CRL_APB_RPLL_FRAC_CFG_OFFSET 
+#define CRL_APB_RPLL_FRAC_CFG_OFFSET                                               0XFF5E0038
+#undef CRL_APB_IOPLL_CFG_OFFSET 
+#define CRL_APB_IOPLL_CFG_OFFSET                                                   0XFF5E0024
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_CTRL_OFFSET 
+#define CRL_APB_IOPLL_CTRL_OFFSET                                                  0XFF5E0020
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_OFFSET 
+#define CRL_APB_IOPLL_TO_FPD_CTRL_OFFSET                                           0XFF5E0044
+#undef CRL_APB_IOPLL_FRAC_CFG_OFFSET 
+#define CRL_APB_IOPLL_FRAC_CFG_OFFSET                                              0XFF5E0028
+#undef CRF_APB_APLL_CFG_OFFSET 
+#define CRF_APB_APLL_CFG_OFFSET                                                    0XFD1A0024
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_CTRL_OFFSET 
+#define CRF_APB_APLL_CTRL_OFFSET                                                   0XFD1A0020
+#undef CRF_APB_APLL_TO_LPD_CTRL_OFFSET 
+#define CRF_APB_APLL_TO_LPD_CTRL_OFFSET                                            0XFD1A0048
+#undef CRF_APB_APLL_FRAC_CFG_OFFSET 
+#define CRF_APB_APLL_FRAC_CFG_OFFSET                                               0XFD1A0028
+#undef CRF_APB_DPLL_CFG_OFFSET 
+#define CRF_APB_DPLL_CFG_OFFSET                                                    0XFD1A0030
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_CTRL_OFFSET 
+#define CRF_APB_DPLL_CTRL_OFFSET                                                   0XFD1A002C
+#undef CRF_APB_DPLL_TO_LPD_CTRL_OFFSET 
+#define CRF_APB_DPLL_TO_LPD_CTRL_OFFSET                                            0XFD1A004C
+#undef CRF_APB_DPLL_FRAC_CFG_OFFSET 
+#define CRF_APB_DPLL_FRAC_CFG_OFFSET                                               0XFD1A0034
+#undef CRF_APB_VPLL_CFG_OFFSET 
+#define CRF_APB_VPLL_CFG_OFFSET                                                    0XFD1A003C
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_CTRL_OFFSET 
+#define CRF_APB_VPLL_CTRL_OFFSET                                                   0XFD1A0038
+#undef CRF_APB_VPLL_TO_LPD_CTRL_OFFSET 
+#define CRF_APB_VPLL_TO_LPD_CTRL_OFFSET                                            0XFD1A0050
+#undef CRF_APB_VPLL_FRAC_CFG_OFFSET 
+#define CRF_APB_VPLL_FRAC_CFG_OFFSET                                               0XFD1A0040
+
+/*PLL loop filter resistor control*/
+#undef CRL_APB_RPLL_CFG_RES_DEFVAL 
+#undef CRL_APB_RPLL_CFG_RES_SHIFT 
+#undef CRL_APB_RPLL_CFG_RES_MASK 
+#define CRL_APB_RPLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRL_APB_RPLL_CFG_RES_SHIFT                                                 0
+#define CRL_APB_RPLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRL_APB_RPLL_CFG_CP_DEFVAL 
+#undef CRL_APB_RPLL_CFG_CP_SHIFT 
+#undef CRL_APB_RPLL_CFG_CP_MASK 
+#define CRL_APB_RPLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRL_APB_RPLL_CFG_CP_SHIFT                                                  5
+#define CRL_APB_RPLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRL_APB_RPLL_CFG_LFHF_DEFVAL 
+#undef CRL_APB_RPLL_CFG_LFHF_SHIFT 
+#undef CRL_APB_RPLL_CFG_LFHF_MASK 
+#define CRL_APB_RPLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRL_APB_RPLL_CFG_LFHF_SHIFT                                                10
+#define CRL_APB_RPLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRL_APB_RPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRL_APB_RPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRL_APB_RPLL_CFG_LOCK_CNT_MASK 
+#define CRL_APB_RPLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRL_APB_RPLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRL_APB_RPLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRL_APB_RPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRL_APB_RPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRL_APB_RPLL_CFG_LOCK_DLY_MASK 
+#define CRL_APB_RPLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRL_APB_RPLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRL_APB_RPLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRL_APB_RPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRL_APB_RPLL_CTRL_PRE_SRC_MASK 
+#define CRL_APB_RPLL_CTRL_PRE_SRC_DEFVAL                                           0x00012C09
+#define CRL_APB_RPLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRL_APB_RPLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRL_APB_RPLL_CTRL_FBDIV_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_FBDIV_SHIFT 
+#undef CRL_APB_RPLL_CTRL_FBDIV_MASK 
+#define CRL_APB_RPLL_CTRL_FBDIV_DEFVAL                                             0x00012C09
+#define CRL_APB_RPLL_CTRL_FBDIV_SHIFT                                              8
+#define CRL_APB_RPLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRL_APB_RPLL_CTRL_DIV2_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_DIV2_SHIFT 
+#undef CRL_APB_RPLL_CTRL_DIV2_MASK 
+#define CRL_APB_RPLL_CTRL_DIV2_DEFVAL                                              0x00012C09
+#define CRL_APB_RPLL_CTRL_DIV2_SHIFT                                               16
+#define CRL_APB_RPLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_RPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_RPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_RPLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRL_APB_RPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRL_APB_RPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_RPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_RPLL_CTRL_RESET_MASK 
+#define CRL_APB_RPLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRL_APB_RPLL_CTRL_RESET_SHIFT                                              0
+#define CRL_APB_RPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_RPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_RPLL_CTRL_RESET_MASK 
+#define CRL_APB_RPLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRL_APB_RPLL_CTRL_RESET_SHIFT                                              0
+#define CRL_APB_RPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*RPLL is locked*/
+#undef CRL_APB_PLL_STATUS_RPLL_LOCK_DEFVAL 
+#undef CRL_APB_PLL_STATUS_RPLL_LOCK_SHIFT 
+#undef CRL_APB_PLL_STATUS_RPLL_LOCK_MASK 
+#define CRL_APB_PLL_STATUS_RPLL_LOCK_DEFVAL                                        0x00000018
+#define CRL_APB_PLL_STATUS_RPLL_LOCK_SHIFT                                         1
+#define CRL_APB_PLL_STATUS_RPLL_LOCK_MASK                                          0x00000002U
+#define CRL_APB_PLL_STATUS_OFFSET                                                  0XFF5E0040
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_RPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_RPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_RPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_RPLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRL_APB_RPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRL_APB_RPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_MASK 
+#define CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRL_APB_RPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRL_APB_RPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRL_APB_RPLL_FRAC_CFG_ENABLED_MASK 
+#define CRL_APB_RPLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRL_APB_RPLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRL_APB_RPLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRL_APB_RPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRL_APB_RPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRL_APB_RPLL_FRAC_CFG_DATA_MASK 
+#define CRL_APB_RPLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRL_APB_RPLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRL_APB_RPLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRL_APB_IOPLL_CFG_RES_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_RES_SHIFT 
+#undef CRL_APB_IOPLL_CFG_RES_MASK 
+#define CRL_APB_IOPLL_CFG_RES_DEFVAL                                               0x00000000
+#define CRL_APB_IOPLL_CFG_RES_SHIFT                                                0
+#define CRL_APB_IOPLL_CFG_RES_MASK                                                 0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRL_APB_IOPLL_CFG_CP_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_CP_SHIFT 
+#undef CRL_APB_IOPLL_CFG_CP_MASK 
+#define CRL_APB_IOPLL_CFG_CP_DEFVAL                                                0x00000000
+#define CRL_APB_IOPLL_CFG_CP_SHIFT                                                 5
+#define CRL_APB_IOPLL_CFG_CP_MASK                                                  0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRL_APB_IOPLL_CFG_LFHF_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_LFHF_SHIFT 
+#undef CRL_APB_IOPLL_CFG_LFHF_MASK 
+#define CRL_APB_IOPLL_CFG_LFHF_DEFVAL                                              0x00000000
+#define CRL_APB_IOPLL_CFG_LFHF_SHIFT                                               10
+#define CRL_APB_IOPLL_CFG_LFHF_MASK                                                0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRL_APB_IOPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRL_APB_IOPLL_CFG_LOCK_CNT_MASK 
+#define CRL_APB_IOPLL_CFG_LOCK_CNT_DEFVAL                                          0x00000000
+#define CRL_APB_IOPLL_CFG_LOCK_CNT_SHIFT                                           13
+#define CRL_APB_IOPLL_CFG_LOCK_CNT_MASK                                            0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRL_APB_IOPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRL_APB_IOPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRL_APB_IOPLL_CFG_LOCK_DLY_MASK 
+#define CRL_APB_IOPLL_CFG_LOCK_DLY_DEFVAL                                          0x00000000
+#define CRL_APB_IOPLL_CFG_LOCK_DLY_SHIFT                                           25
+#define CRL_APB_IOPLL_CFG_LOCK_DLY_MASK                                            0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRL_APB_IOPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_PRE_SRC_MASK 
+#define CRL_APB_IOPLL_CTRL_PRE_SRC_DEFVAL                                          0x00012C09
+#define CRL_APB_IOPLL_CTRL_PRE_SRC_SHIFT                                           20
+#define CRL_APB_IOPLL_CTRL_PRE_SRC_MASK                                            0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRL_APB_IOPLL_CTRL_FBDIV_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_FBDIV_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_FBDIV_MASK 
+#define CRL_APB_IOPLL_CTRL_FBDIV_DEFVAL                                            0x00012C09
+#define CRL_APB_IOPLL_CTRL_FBDIV_SHIFT                                             8
+#define CRL_APB_IOPLL_CTRL_FBDIV_MASK                                              0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRL_APB_IOPLL_CTRL_DIV2_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_DIV2_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_DIV2_MASK 
+#define CRL_APB_IOPLL_CTRL_DIV2_DEFVAL                                             0x00012C09
+#define CRL_APB_IOPLL_CTRL_DIV2_SHIFT                                              16
+#define CRL_APB_IOPLL_CTRL_DIV2_MASK                                               0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL                                           0x00012C09
+#define CRL_APB_IOPLL_CTRL_BYPASS_SHIFT                                            3
+#define CRL_APB_IOPLL_CTRL_BYPASS_MASK                                             0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_IOPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_RESET_MASK 
+#define CRL_APB_IOPLL_CTRL_RESET_DEFVAL                                            0x00012C09
+#define CRL_APB_IOPLL_CTRL_RESET_SHIFT                                             0
+#define CRL_APB_IOPLL_CTRL_RESET_MASK                                              0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRL_APB_IOPLL_CTRL_RESET_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_RESET_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_RESET_MASK 
+#define CRL_APB_IOPLL_CTRL_RESET_DEFVAL                                            0x00012C09
+#define CRL_APB_IOPLL_CTRL_RESET_SHIFT                                             0
+#define CRL_APB_IOPLL_CTRL_RESET_MASK                                              0x00000001U
+
+/*IOPLL is locked*/
+#undef CRL_APB_PLL_STATUS_IOPLL_LOCK_DEFVAL 
+#undef CRL_APB_PLL_STATUS_IOPLL_LOCK_SHIFT 
+#undef CRL_APB_PLL_STATUS_IOPLL_LOCK_MASK 
+#define CRL_APB_PLL_STATUS_IOPLL_LOCK_DEFVAL                                       0x00000018
+#define CRL_APB_PLL_STATUS_IOPLL_LOCK_SHIFT                                        0
+#define CRL_APB_PLL_STATUS_IOPLL_LOCK_MASK                                         0x00000001U
+#define CRL_APB_PLL_STATUS_OFFSET                                                  0XFF5E0040
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_SHIFT 
+#undef CRL_APB_IOPLL_CTRL_BYPASS_MASK 
+#define CRL_APB_IOPLL_CTRL_BYPASS_DEFVAL                                           0x00012C09
+#define CRL_APB_IOPLL_CTRL_BYPASS_SHIFT                                            3
+#define CRL_APB_IOPLL_CTRL_BYPASS_MASK                                             0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_MASK 
+#define CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_DEFVAL                                  0x00000400
+#define CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_SHIFT                                   8
+#define CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRL_APB_IOPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRL_APB_IOPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRL_APB_IOPLL_FRAC_CFG_ENABLED_MASK 
+#define CRL_APB_IOPLL_FRAC_CFG_ENABLED_DEFVAL                                      0x00000000
+#define CRL_APB_IOPLL_FRAC_CFG_ENABLED_SHIFT                                       31
+#define CRL_APB_IOPLL_FRAC_CFG_ENABLED_MASK                                        0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRL_APB_IOPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRL_APB_IOPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRL_APB_IOPLL_FRAC_CFG_DATA_MASK 
+#define CRL_APB_IOPLL_FRAC_CFG_DATA_DEFVAL                                         0x00000000
+#define CRL_APB_IOPLL_FRAC_CFG_DATA_SHIFT                                          0
+#define CRL_APB_IOPLL_FRAC_CFG_DATA_MASK                                           0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRF_APB_APLL_CFG_RES_DEFVAL 
+#undef CRF_APB_APLL_CFG_RES_SHIFT 
+#undef CRF_APB_APLL_CFG_RES_MASK 
+#define CRF_APB_APLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRF_APB_APLL_CFG_RES_SHIFT                                                 0
+#define CRF_APB_APLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRF_APB_APLL_CFG_CP_DEFVAL 
+#undef CRF_APB_APLL_CFG_CP_SHIFT 
+#undef CRF_APB_APLL_CFG_CP_MASK 
+#define CRF_APB_APLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRF_APB_APLL_CFG_CP_SHIFT                                                  5
+#define CRF_APB_APLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRF_APB_APLL_CFG_LFHF_DEFVAL 
+#undef CRF_APB_APLL_CFG_LFHF_SHIFT 
+#undef CRF_APB_APLL_CFG_LFHF_MASK 
+#define CRF_APB_APLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRF_APB_APLL_CFG_LFHF_SHIFT                                                10
+#define CRF_APB_APLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRF_APB_APLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRF_APB_APLL_CFG_LOCK_CNT_SHIFT 
+#undef CRF_APB_APLL_CFG_LOCK_CNT_MASK 
+#define CRF_APB_APLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRF_APB_APLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRF_APB_APLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRF_APB_APLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRF_APB_APLL_CFG_LOCK_DLY_SHIFT 
+#undef CRF_APB_APLL_CFG_LOCK_DLY_MASK 
+#define CRF_APB_APLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRF_APB_APLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRF_APB_APLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRF_APB_APLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRF_APB_APLL_CTRL_PRE_SRC_SHIFT 
+#undef CRF_APB_APLL_CTRL_PRE_SRC_MASK 
+#define CRF_APB_APLL_CTRL_PRE_SRC_DEFVAL                                           0x00012C09
+#define CRF_APB_APLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRF_APB_APLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRF_APB_APLL_CTRL_FBDIV_DEFVAL 
+#undef CRF_APB_APLL_CTRL_FBDIV_SHIFT 
+#undef CRF_APB_APLL_CTRL_FBDIV_MASK 
+#define CRF_APB_APLL_CTRL_FBDIV_DEFVAL                                             0x00012C09
+#define CRF_APB_APLL_CTRL_FBDIV_SHIFT                                              8
+#define CRF_APB_APLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRF_APB_APLL_CTRL_DIV2_DEFVAL 
+#undef CRF_APB_APLL_CTRL_DIV2_SHIFT 
+#undef CRF_APB_APLL_CTRL_DIV2_MASK 
+#define CRF_APB_APLL_CTRL_DIV2_DEFVAL                                              0x00012C09
+#define CRF_APB_APLL_CTRL_DIV2_SHIFT                                               16
+#define CRF_APB_APLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_APLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_APLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_APLL_CTRL_BYPASS_MASK 
+#define CRF_APB_APLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRF_APB_APLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_APLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_APLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_APLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_APLL_CTRL_RESET_MASK 
+#define CRF_APB_APLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRF_APB_APLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_APLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_APLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_APLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_APLL_CTRL_RESET_MASK 
+#define CRF_APB_APLL_CTRL_RESET_DEFVAL                                             0x00012C09
+#define CRF_APB_APLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_APLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*APLL is locked*/
+#undef CRF_APB_PLL_STATUS_APLL_LOCK_DEFVAL 
+#undef CRF_APB_PLL_STATUS_APLL_LOCK_SHIFT 
+#undef CRF_APB_PLL_STATUS_APLL_LOCK_MASK 
+#define CRF_APB_PLL_STATUS_APLL_LOCK_DEFVAL                                        0x00000038
+#define CRF_APB_PLL_STATUS_APLL_LOCK_SHIFT                                         0
+#define CRF_APB_PLL_STATUS_APLL_LOCK_MASK                                          0x00000001U
+#define CRF_APB_PLL_STATUS_OFFSET                                                  0XFD1A0044
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_APLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_APLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_APLL_CTRL_BYPASS_MASK 
+#define CRF_APB_APLL_CTRL_BYPASS_DEFVAL                                            0x00012C09
+#define CRF_APB_APLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_APLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRF_APB_APLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRF_APB_APLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRF_APB_APLL_FRAC_CFG_ENABLED_MASK 
+#define CRF_APB_APLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRF_APB_APLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRF_APB_APLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRF_APB_APLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRF_APB_APLL_FRAC_CFG_DATA_SHIFT 
+#undef CRF_APB_APLL_FRAC_CFG_DATA_MASK 
+#define CRF_APB_APLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRF_APB_APLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRF_APB_APLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRF_APB_DPLL_CFG_RES_DEFVAL 
+#undef CRF_APB_DPLL_CFG_RES_SHIFT 
+#undef CRF_APB_DPLL_CFG_RES_MASK 
+#define CRF_APB_DPLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRF_APB_DPLL_CFG_RES_SHIFT                                                 0
+#define CRF_APB_DPLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRF_APB_DPLL_CFG_CP_DEFVAL 
+#undef CRF_APB_DPLL_CFG_CP_SHIFT 
+#undef CRF_APB_DPLL_CFG_CP_MASK 
+#define CRF_APB_DPLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRF_APB_DPLL_CFG_CP_SHIFT                                                  5
+#define CRF_APB_DPLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRF_APB_DPLL_CFG_LFHF_DEFVAL 
+#undef CRF_APB_DPLL_CFG_LFHF_SHIFT 
+#undef CRF_APB_DPLL_CFG_LFHF_MASK 
+#define CRF_APB_DPLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRF_APB_DPLL_CFG_LFHF_SHIFT                                                10
+#define CRF_APB_DPLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRF_APB_DPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRF_APB_DPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRF_APB_DPLL_CFG_LOCK_CNT_MASK 
+#define CRF_APB_DPLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRF_APB_DPLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRF_APB_DPLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRF_APB_DPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRF_APB_DPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRF_APB_DPLL_CFG_LOCK_DLY_MASK 
+#define CRF_APB_DPLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRF_APB_DPLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRF_APB_DPLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRF_APB_DPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRF_APB_DPLL_CTRL_PRE_SRC_MASK 
+#define CRF_APB_DPLL_CTRL_PRE_SRC_DEFVAL                                           0x00002C09
+#define CRF_APB_DPLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRF_APB_DPLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRF_APB_DPLL_CTRL_FBDIV_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_FBDIV_SHIFT 
+#undef CRF_APB_DPLL_CTRL_FBDIV_MASK 
+#define CRF_APB_DPLL_CTRL_FBDIV_DEFVAL                                             0x00002C09
+#define CRF_APB_DPLL_CTRL_FBDIV_SHIFT                                              8
+#define CRF_APB_DPLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRF_APB_DPLL_CTRL_DIV2_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_DIV2_SHIFT 
+#undef CRF_APB_DPLL_CTRL_DIV2_MASK 
+#define CRF_APB_DPLL_CTRL_DIV2_DEFVAL                                              0x00002C09
+#define CRF_APB_DPLL_CTRL_DIV2_SHIFT                                               16
+#define CRF_APB_DPLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_DPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_DPLL_CTRL_BYPASS_DEFVAL                                            0x00002C09
+#define CRF_APB_DPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_DPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_DPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_DPLL_CTRL_RESET_MASK 
+#define CRF_APB_DPLL_CTRL_RESET_DEFVAL                                             0x00002C09
+#define CRF_APB_DPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_DPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_DPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_DPLL_CTRL_RESET_MASK 
+#define CRF_APB_DPLL_CTRL_RESET_DEFVAL                                             0x00002C09
+#define CRF_APB_DPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_DPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*DPLL is locked*/
+#undef CRF_APB_PLL_STATUS_DPLL_LOCK_DEFVAL 
+#undef CRF_APB_PLL_STATUS_DPLL_LOCK_SHIFT 
+#undef CRF_APB_PLL_STATUS_DPLL_LOCK_MASK 
+#define CRF_APB_PLL_STATUS_DPLL_LOCK_DEFVAL                                        0x00000038
+#define CRF_APB_PLL_STATUS_DPLL_LOCK_SHIFT                                         1
+#define CRF_APB_PLL_STATUS_DPLL_LOCK_MASK                                          0x00000002U
+#define CRF_APB_PLL_STATUS_OFFSET                                                  0XFD1A0044
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_DPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_DPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_DPLL_CTRL_BYPASS_DEFVAL                                            0x00002C09
+#define CRF_APB_DPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_DPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRF_APB_DPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRF_APB_DPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRF_APB_DPLL_FRAC_CFG_ENABLED_MASK 
+#define CRF_APB_DPLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRF_APB_DPLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRF_APB_DPLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRF_APB_DPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRF_APB_DPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRF_APB_DPLL_FRAC_CFG_DATA_MASK 
+#define CRF_APB_DPLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRF_APB_DPLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRF_APB_DPLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+
+/*PLL loop filter resistor control*/
+#undef CRF_APB_VPLL_CFG_RES_DEFVAL 
+#undef CRF_APB_VPLL_CFG_RES_SHIFT 
+#undef CRF_APB_VPLL_CFG_RES_MASK 
+#define CRF_APB_VPLL_CFG_RES_DEFVAL                                                0x00000000
+#define CRF_APB_VPLL_CFG_RES_SHIFT                                                 0
+#define CRF_APB_VPLL_CFG_RES_MASK                                                  0x0000000FU
+
+/*PLL charge pump control*/
+#undef CRF_APB_VPLL_CFG_CP_DEFVAL 
+#undef CRF_APB_VPLL_CFG_CP_SHIFT 
+#undef CRF_APB_VPLL_CFG_CP_MASK 
+#define CRF_APB_VPLL_CFG_CP_DEFVAL                                                 0x00000000
+#define CRF_APB_VPLL_CFG_CP_SHIFT                                                  5
+#define CRF_APB_VPLL_CFG_CP_MASK                                                   0x000001E0U
+
+/*PLL loop filter high frequency capacitor control*/
+#undef CRF_APB_VPLL_CFG_LFHF_DEFVAL 
+#undef CRF_APB_VPLL_CFG_LFHF_SHIFT 
+#undef CRF_APB_VPLL_CFG_LFHF_MASK 
+#define CRF_APB_VPLL_CFG_LFHF_DEFVAL                                               0x00000000
+#define CRF_APB_VPLL_CFG_LFHF_SHIFT                                                10
+#define CRF_APB_VPLL_CFG_LFHF_MASK                                                 0x00000C00U
+
+/*Lock circuit counter setting*/
+#undef CRF_APB_VPLL_CFG_LOCK_CNT_DEFVAL 
+#undef CRF_APB_VPLL_CFG_LOCK_CNT_SHIFT 
+#undef CRF_APB_VPLL_CFG_LOCK_CNT_MASK 
+#define CRF_APB_VPLL_CFG_LOCK_CNT_DEFVAL                                           0x00000000
+#define CRF_APB_VPLL_CFG_LOCK_CNT_SHIFT                                            13
+#define CRF_APB_VPLL_CFG_LOCK_CNT_MASK                                             0x007FE000U
+
+/*Lock circuit configuration settings for lock windowsize*/
+#undef CRF_APB_VPLL_CFG_LOCK_DLY_DEFVAL 
+#undef CRF_APB_VPLL_CFG_LOCK_DLY_SHIFT 
+#undef CRF_APB_VPLL_CFG_LOCK_DLY_MASK 
+#define CRF_APB_VPLL_CFG_LOCK_DLY_DEFVAL                                           0x00000000
+#define CRF_APB_VPLL_CFG_LOCK_DLY_SHIFT                                            25
+#define CRF_APB_VPLL_CFG_LOCK_DLY_MASK                                             0xFE000000U
+
+/*Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
+		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source*/
+#undef CRF_APB_VPLL_CTRL_PRE_SRC_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_PRE_SRC_SHIFT 
+#undef CRF_APB_VPLL_CTRL_PRE_SRC_MASK 
+#define CRF_APB_VPLL_CTRL_PRE_SRC_DEFVAL                                           0x00012809
+#define CRF_APB_VPLL_CTRL_PRE_SRC_SHIFT                                            20
+#define CRF_APB_VPLL_CTRL_PRE_SRC_MASK                                             0x00700000U
+
+/*The integer portion of the feedback divider to the PLL*/
+#undef CRF_APB_VPLL_CTRL_FBDIV_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_FBDIV_SHIFT 
+#undef CRF_APB_VPLL_CTRL_FBDIV_MASK 
+#define CRF_APB_VPLL_CTRL_FBDIV_DEFVAL                                             0x00012809
+#define CRF_APB_VPLL_CTRL_FBDIV_SHIFT                                              8
+#define CRF_APB_VPLL_CTRL_FBDIV_MASK                                               0x00007F00U
+
+/*This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency*/
+#undef CRF_APB_VPLL_CTRL_DIV2_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_DIV2_SHIFT 
+#undef CRF_APB_VPLL_CTRL_DIV2_MASK 
+#define CRF_APB_VPLL_CTRL_DIV2_DEFVAL                                              0x00012809
+#define CRF_APB_VPLL_CTRL_DIV2_SHIFT                                               16
+#define CRF_APB_VPLL_CTRL_DIV2_MASK                                                0x00010000U
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_VPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_VPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_VPLL_CTRL_BYPASS_DEFVAL                                            0x00012809
+#define CRF_APB_VPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_VPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_VPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_VPLL_CTRL_RESET_MASK 
+#define CRF_APB_VPLL_CTRL_RESET_DEFVAL                                             0x00012809
+#define CRF_APB_VPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_VPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.*/
+#undef CRF_APB_VPLL_CTRL_RESET_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_RESET_SHIFT 
+#undef CRF_APB_VPLL_CTRL_RESET_MASK 
+#define CRF_APB_VPLL_CTRL_RESET_DEFVAL                                             0x00012809
+#define CRF_APB_VPLL_CTRL_RESET_SHIFT                                              0
+#define CRF_APB_VPLL_CTRL_RESET_MASK                                               0x00000001U
+
+/*VPLL is locked*/
+#undef CRF_APB_PLL_STATUS_VPLL_LOCK_DEFVAL 
+#undef CRF_APB_PLL_STATUS_VPLL_LOCK_SHIFT 
+#undef CRF_APB_PLL_STATUS_VPLL_LOCK_MASK 
+#define CRF_APB_PLL_STATUS_VPLL_LOCK_DEFVAL                                        0x00000038
+#define CRF_APB_PLL_STATUS_VPLL_LOCK_SHIFT                                         2
+#define CRF_APB_PLL_STATUS_VPLL_LOCK_MASK                                          0x00000004U
+#define CRF_APB_PLL_STATUS_OFFSET                                                  0XFD1A0044
+
+/*Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
+		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_VPLL_CTRL_BYPASS_DEFVAL 
+#undef CRF_APB_VPLL_CTRL_BYPASS_SHIFT 
+#undef CRF_APB_VPLL_CTRL_BYPASS_MASK 
+#define CRF_APB_VPLL_CTRL_BYPASS_DEFVAL                                            0x00012809
+#define CRF_APB_VPLL_CTRL_BYPASS_SHIFT                                             3
+#define CRF_APB_VPLL_CTRL_BYPASS_MASK                                              0x00000008U
+
+/*Divisor value for this clock.*/
+#undef CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_DEFVAL                                   0x00000400
+#define CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
+		 mode and uses DATA of this register for the fractional portion of the feedback divider.*/
+#undef CRF_APB_VPLL_FRAC_CFG_ENABLED_DEFVAL 
+#undef CRF_APB_VPLL_FRAC_CFG_ENABLED_SHIFT 
+#undef CRF_APB_VPLL_FRAC_CFG_ENABLED_MASK 
+#define CRF_APB_VPLL_FRAC_CFG_ENABLED_DEFVAL                                       0x00000000
+#define CRF_APB_VPLL_FRAC_CFG_ENABLED_SHIFT                                        31
+#define CRF_APB_VPLL_FRAC_CFG_ENABLED_MASK                                         0x80000000U
+
+/*Fractional value for the Feedback value.*/
+#undef CRF_APB_VPLL_FRAC_CFG_DATA_DEFVAL 
+#undef CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT 
+#undef CRF_APB_VPLL_FRAC_CFG_DATA_MASK 
+#define CRF_APB_VPLL_FRAC_CFG_DATA_DEFVAL                                          0x00000000
+#define CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT                                           0
+#define CRF_APB_VPLL_FRAC_CFG_DATA_MASK                                            0x0000FFFFU
+#undef CRL_APB_GEM0_REF_CTRL_OFFSET 
+#define CRL_APB_GEM0_REF_CTRL_OFFSET                                               0XFF5E0050
+#undef CRL_APB_GEM1_REF_CTRL_OFFSET 
+#define CRL_APB_GEM1_REF_CTRL_OFFSET                                               0XFF5E0054
+#undef CRL_APB_GEM2_REF_CTRL_OFFSET 
+#define CRL_APB_GEM2_REF_CTRL_OFFSET                                               0XFF5E0058
+#undef CRL_APB_GEM3_REF_CTRL_OFFSET 
+#define CRL_APB_GEM3_REF_CTRL_OFFSET                                               0XFF5E005C
+#undef CRL_APB_GEM_TSU_REF_CTRL_OFFSET 
+#define CRL_APB_GEM_TSU_REF_CTRL_OFFSET                                            0XFF5E0100
+#undef CRL_APB_USB0_BUS_REF_CTRL_OFFSET 
+#define CRL_APB_USB0_BUS_REF_CTRL_OFFSET                                           0XFF5E0060
+#undef CRL_APB_USB1_BUS_REF_CTRL_OFFSET 
+#define CRL_APB_USB1_BUS_REF_CTRL_OFFSET                                           0XFF5E0064
+#undef CRL_APB_USB3_DUAL_REF_CTRL_OFFSET 
+#define CRL_APB_USB3_DUAL_REF_CTRL_OFFSET                                          0XFF5E004C
+#undef CRL_APB_QSPI_REF_CTRL_OFFSET 
+#define CRL_APB_QSPI_REF_CTRL_OFFSET                                               0XFF5E0068
+#undef CRL_APB_SDIO0_REF_CTRL_OFFSET 
+#define CRL_APB_SDIO0_REF_CTRL_OFFSET                                              0XFF5E006C
+#undef CRL_APB_SDIO1_REF_CTRL_OFFSET 
+#define CRL_APB_SDIO1_REF_CTRL_OFFSET                                              0XFF5E0070
+#undef IOU_SLCR_SDIO_CLK_CTRL_OFFSET 
+#define IOU_SLCR_SDIO_CLK_CTRL_OFFSET                                              0XFF18030C
+#undef CRL_APB_UART0_REF_CTRL_OFFSET 
+#define CRL_APB_UART0_REF_CTRL_OFFSET                                              0XFF5E0074
+#undef CRL_APB_UART1_REF_CTRL_OFFSET 
+#define CRL_APB_UART1_REF_CTRL_OFFSET                                              0XFF5E0078
+#undef CRL_APB_I2C0_REF_CTRL_OFFSET 
+#define CRL_APB_I2C0_REF_CTRL_OFFSET                                               0XFF5E0120
+#undef CRL_APB_I2C1_REF_CTRL_OFFSET 
+#define CRL_APB_I2C1_REF_CTRL_OFFSET                                               0XFF5E0124
+#undef CRL_APB_SPI0_REF_CTRL_OFFSET 
+#define CRL_APB_SPI0_REF_CTRL_OFFSET                                               0XFF5E007C
+#undef CRL_APB_SPI1_REF_CTRL_OFFSET 
+#define CRL_APB_SPI1_REF_CTRL_OFFSET                                               0XFF5E0080
+#undef CRL_APB_CAN0_REF_CTRL_OFFSET 
+#define CRL_APB_CAN0_REF_CTRL_OFFSET                                               0XFF5E0084
+#undef CRL_APB_CAN1_REF_CTRL_OFFSET 
+#define CRL_APB_CAN1_REF_CTRL_OFFSET                                               0XFF5E0088
+#undef CRL_APB_CPU_R5_CTRL_OFFSET 
+#define CRL_APB_CPU_R5_CTRL_OFFSET                                                 0XFF5E0090
+#undef CRL_APB_IOU_SWITCH_CTRL_OFFSET 
+#define CRL_APB_IOU_SWITCH_CTRL_OFFSET                                             0XFF5E009C
+#undef CRL_APB_CSU_PLL_CTRL_OFFSET 
+#define CRL_APB_CSU_PLL_CTRL_OFFSET                                                0XFF5E00A0
+#undef CRL_APB_PCAP_CTRL_OFFSET 
+#define CRL_APB_PCAP_CTRL_OFFSET                                                   0XFF5E00A4
+#undef CRL_APB_LPD_SWITCH_CTRL_OFFSET 
+#define CRL_APB_LPD_SWITCH_CTRL_OFFSET                                             0XFF5E00A8
+#undef CRL_APB_LPD_LSBUS_CTRL_OFFSET 
+#define CRL_APB_LPD_LSBUS_CTRL_OFFSET                                              0XFF5E00AC
+#undef CRL_APB_DBG_LPD_CTRL_OFFSET 
+#define CRL_APB_DBG_LPD_CTRL_OFFSET                                                0XFF5E00B0
+#undef CRL_APB_NAND_REF_CTRL_OFFSET 
+#define CRL_APB_NAND_REF_CTRL_OFFSET                                               0XFF5E00B4
+#undef CRL_APB_ADMA_REF_CTRL_OFFSET 
+#define CRL_APB_ADMA_REF_CTRL_OFFSET                                               0XFF5E00B8
+#undef CRL_APB_PL0_REF_CTRL_OFFSET 
+#define CRL_APB_PL0_REF_CTRL_OFFSET                                                0XFF5E00C0
+#undef CRL_APB_PL1_REF_CTRL_OFFSET 
+#define CRL_APB_PL1_REF_CTRL_OFFSET                                                0XFF5E00C4
+#undef CRL_APB_PL2_REF_CTRL_OFFSET 
+#define CRL_APB_PL2_REF_CTRL_OFFSET                                                0XFF5E00C8
+#undef CRL_APB_PL3_REF_CTRL_OFFSET 
+#define CRL_APB_PL3_REF_CTRL_OFFSET                                                0XFF5E00CC
+#undef CRL_APB_AMS_REF_CTRL_OFFSET 
+#define CRL_APB_AMS_REF_CTRL_OFFSET                                                0XFF5E0108
+#undef CRL_APB_DLL_REF_CTRL_OFFSET 
+#define CRL_APB_DLL_REF_CTRL_OFFSET                                                0XFF5E0104
+#undef CRL_APB_TIMESTAMP_REF_CTRL_OFFSET 
+#define CRL_APB_TIMESTAMP_REF_CTRL_OFFSET                                          0XFF5E0128
+#undef CRF_APB_SATA_REF_CTRL_OFFSET 
+#define CRF_APB_SATA_REF_CTRL_OFFSET                                               0XFD1A00A0
+#undef CRF_APB_PCIE_REF_CTRL_OFFSET 
+#define CRF_APB_PCIE_REF_CTRL_OFFSET                                               0XFD1A00B4
+#undef CRF_APB_DP_VIDEO_REF_CTRL_OFFSET 
+#define CRF_APB_DP_VIDEO_REF_CTRL_OFFSET                                           0XFD1A0070
+#undef CRF_APB_DP_AUDIO_REF_CTRL_OFFSET 
+#define CRF_APB_DP_AUDIO_REF_CTRL_OFFSET                                           0XFD1A0074
+#undef CRF_APB_DP_STC_REF_CTRL_OFFSET 
+#define CRF_APB_DP_STC_REF_CTRL_OFFSET                                             0XFD1A007C
+#undef CRF_APB_ACPU_CTRL_OFFSET 
+#define CRF_APB_ACPU_CTRL_OFFSET                                                   0XFD1A0060
+#undef CRF_APB_DBG_TRACE_CTRL_OFFSET 
+#define CRF_APB_DBG_TRACE_CTRL_OFFSET                                              0XFD1A0064
+#undef CRF_APB_DBG_FPD_CTRL_OFFSET 
+#define CRF_APB_DBG_FPD_CTRL_OFFSET                                                0XFD1A0068
+#undef CRF_APB_DDR_CTRL_OFFSET 
+#define CRF_APB_DDR_CTRL_OFFSET                                                    0XFD1A0080
+#undef CRF_APB_GPU_REF_CTRL_OFFSET 
+#define CRF_APB_GPU_REF_CTRL_OFFSET                                                0XFD1A0084
+#undef CRF_APB_GDMA_REF_CTRL_OFFSET 
+#define CRF_APB_GDMA_REF_CTRL_OFFSET                                               0XFD1A00B8
+#undef CRF_APB_DPDMA_REF_CTRL_OFFSET 
+#define CRF_APB_DPDMA_REF_CTRL_OFFSET                                              0XFD1A00BC
+#undef CRF_APB_TOPSW_MAIN_CTRL_OFFSET 
+#define CRF_APB_TOPSW_MAIN_CTRL_OFFSET                                             0XFD1A00C0
+#undef CRF_APB_TOPSW_LSBUS_CTRL_OFFSET 
+#define CRF_APB_TOPSW_LSBUS_CTRL_OFFSET                                            0XFD1A00C4
+#undef CRF_APB_GTGREF0_REF_CTRL_OFFSET 
+#define CRF_APB_GTGREF0_REF_CTRL_OFFSET                                            0XFD1A00C8
+#undef CRF_APB_DBG_TSTMP_CTRL_OFFSET 
+#define CRF_APB_DBG_TSTMP_CTRL_OFFSET                                              0XFD1A00F8
+#undef IOU_SLCR_IOU_TTC_APB_CLK_OFFSET 
+#define IOU_SLCR_IOU_TTC_APB_CLK_OFFSET                                            0XFF180380
+#undef FPD_SLCR_WDT_CLK_SEL_OFFSET 
+#define FPD_SLCR_WDT_CLK_SEL_OFFSET                                                0XFD610100
+#undef IOU_SLCR_WDT_CLK_SEL_OFFSET 
+#define IOU_SLCR_WDT_CLK_SEL_OFFSET                                                0XFF180300
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET 
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET                                         0XFF410050
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM0_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM1_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM2_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active for the RX channel*/
+#undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_MASK 
+#define CRL_APB_GEM3_REF_CTRL_RX_CLKACT_DEFVAL                                     0x00002500
+#define CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT                                      26
+#define CRL_APB_GEM3_REF_CTRL_RX_CLKACT_MASK                                       0x04000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM3_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM3_REF_CTRL_CLKACT_DEFVAL                                        0x00002500
+#define CRL_APB_GEM3_REF_CTRL_CLKACT_SHIFT                                         25
+#define CRL_APB_GEM3_REF_CTRL_CLKACT_MASK                                          0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR1_DEFVAL                                      0x00002500
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002500
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_GEM3_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM3_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM3_REF_CTRL_SRCSEL_DEFVAL                                        0x00002500
+#define CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL                                   0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT                                    8
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL                                     0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT                                      0
+#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK                                       0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL                                   0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT                                    16
+#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK                                     0x003F0000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL                                     0x00051000
+#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT                                      24
+#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK                                       0x01000000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_CLKACT_DEFVAL                                    0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT                                     25
+#define CRL_APB_USB0_BUS_REF_CTRL_CLKACT_MASK                                      0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_DEFVAL                                  0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_DEFVAL                                  0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_DEFVAL                                    0x00052000
+#define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL                                    0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT                                     25
+#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK                                      0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL                                  0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL                                  0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL                                    0x00052000
+#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_DEFVAL                                   0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT                                    25
+#define CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_MASK                                     0x02000000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_DEFVAL                                 0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_SHIFT                                  16
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_MASK                                   0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_DEFVAL                                 0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_SHIFT                                  8
+#define CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_MASK                                   0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL. (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_DEFVAL                                   0x00052000
+#define CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_SHIFT                                    0
+#define CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_MASK                                     0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_QSPI_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_QSPI_REF_CTRL_CLKACT_DEFVAL                                        0x01000800
+#define CRL_APB_QSPI_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_QSPI_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR1_DEFVAL                                      0x01000800
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000800
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_QSPI_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_QSPI_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_QSPI_REF_CTRL_SRCSEL_DEFVAL                                        0x01000800
+#define CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SDIO1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_CLKACT_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_SDIO1_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR1_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR0_DEFVAL                                     0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_SDIO1_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SDIO1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SDIO1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SDIO1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SDIO1_REF_CTRL_SRCSEL_DEFVAL                                       0x01000F00
+#define CRL_APB_SDIO1_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_SDIO1_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*MIO pad selection for sdio1_rx_clk (feedback clock from the PAD) 0: MIO [51] 1: MIO [76]*/
+#undef IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_DEFVAL 
+#undef IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT 
+#undef IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK 
+#define IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_DEFVAL                             0x00000000
+#define IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT                              17
+#define IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK                               0x00020000U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_UART0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_UART0_REF_CTRL_CLKACT_DEFVAL                                       0x01001800
+#define CRL_APB_UART0_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_UART0_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_UART0_REF_CTRL_DIVISOR1_DEFVAL                                     0x01001800
+#define CRL_APB_UART0_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_UART0_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_UART0_REF_CTRL_DIVISOR0_DEFVAL                                     0x01001800
+#define CRL_APB_UART0_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_UART0_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_UART0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_UART0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_UART0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_UART0_REF_CTRL_SRCSEL_DEFVAL                                       0x01001800
+#define CRL_APB_UART0_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_UART0_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_UART1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_UART1_REF_CTRL_CLKACT_DEFVAL                                       0x01001800
+#define CRL_APB_UART1_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_UART1_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_UART1_REF_CTRL_DIVISOR1_DEFVAL                                     0x01001800
+#define CRL_APB_UART1_REF_CTRL_DIVISOR1_SHIFT                                      16
+#define CRL_APB_UART1_REF_CTRL_DIVISOR1_MASK                                       0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_UART1_REF_CTRL_DIVISOR0_DEFVAL                                     0x01001800
+#define CRL_APB_UART1_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_UART1_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_UART1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_UART1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_UART1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_UART1_REF_CTRL_SRCSEL_DEFVAL                                       0x01001800
+#define CRL_APB_UART1_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_UART1_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_I2C0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_I2C0_REF_CTRL_CLKACT_DEFVAL                                        0x01000500
+#define CRL_APB_I2C0_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_I2C0_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR1_DEFVAL                                      0x01000500
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000500
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_I2C0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_I2C0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_I2C0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_I2C0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_I2C0_REF_CTRL_SRCSEL_DEFVAL                                        0x01000500
+#define CRL_APB_I2C0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_I2C0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_I2C1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_I2C1_REF_CTRL_CLKACT_DEFVAL                                        0x01000500
+#define CRL_APB_I2C1_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_I2C1_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR1_DEFVAL                                      0x01000500
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000500
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_I2C1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_I2C1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_I2C1_REF_CTRL_SRCSEL_DEFVAL                                        0x01000500
+#define CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_SPI0_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_SPI1_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_CAN0_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_CAN1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_CAN1_REF_CTRL_CLKACT_DEFVAL                                        0x01001800
+#define CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_CAN1_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR1_DEFVAL                                      0x01001800
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001800
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_CAN1_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CAN1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CAN1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CAN1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_CAN1_REF_CTRL_SRCSEL_DEFVAL                                        0x01001800
+#define CRL_APB_CAN1_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_CAN1_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Turing this off will shut down the OCM, some parts of the APM, and prevent transactions going from the FPD to the LPD and cou
+		d lead to system hang*/
+#undef CRL_APB_CPU_R5_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CPU_R5_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CPU_R5_CTRL_CLKACT_MASK 
+#define CRL_APB_CPU_R5_CTRL_CLKACT_DEFVAL                                          0x03000600
+#define CRL_APB_CPU_R5_CTRL_CLKACT_SHIFT                                           24
+#define CRL_APB_CPU_R5_CTRL_CLKACT_MASK                                            0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CPU_R5_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CPU_R5_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CPU_R5_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CPU_R5_CTRL_DIVISOR0_DEFVAL                                        0x03000600
+#define CRL_APB_CPU_R5_CTRL_DIVISOR0_SHIFT                                         8
+#define CRL_APB_CPU_R5_CTRL_DIVISOR0_MASK                                          0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CPU_R5_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CPU_R5_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CPU_R5_CTRL_SRCSEL_MASK 
+#define CRL_APB_CPU_R5_CTRL_SRCSEL_DEFVAL                                          0x03000600
+#define CRL_APB_CPU_R5_CTRL_SRCSEL_SHIFT                                           0
+#define CRL_APB_CPU_R5_CTRL_SRCSEL_MASK                                            0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_IOU_SWITCH_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_IOU_SWITCH_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_IOU_SWITCH_CTRL_CLKACT_MASK 
+#define CRL_APB_IOU_SWITCH_CTRL_CLKACT_DEFVAL                                      0x00001500
+#define CRL_APB_IOU_SWITCH_CTRL_CLKACT_SHIFT                                       24
+#define CRL_APB_IOU_SWITCH_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_MASK 
+#define CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_DEFVAL                                    0x00001500
+#define CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_SHIFT                                     8
+#define CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_IOU_SWITCH_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK 
+#define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_DEFVAL                                      0x00001500
+#define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT                                       0
+#define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_CSU_PLL_CTRL_CLKACT_MASK 
+#define CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL                                         0x01001500
+#define CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_CSU_PLL_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK 
+#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL                                       0x01001500
+#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK 
+#define CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL                                         0x01001500
+#define CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PCAP_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PCAP_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PCAP_CTRL_CLKACT_MASK 
+#define CRL_APB_PCAP_CTRL_CLKACT_DEFVAL                                            0x00001500
+#define CRL_APB_PCAP_CTRL_CLKACT_SHIFT                                             24
+#define CRL_APB_PCAP_CTRL_CLKACT_MASK                                              0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PCAP_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PCAP_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PCAP_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PCAP_CTRL_DIVISOR0_DEFVAL                                          0x00001500
+#define CRL_APB_PCAP_CTRL_DIVISOR0_SHIFT                                           8
+#define CRL_APB_PCAP_CTRL_DIVISOR0_MASK                                            0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PCAP_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PCAP_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PCAP_CTRL_SRCSEL_MASK 
+#define CRL_APB_PCAP_CTRL_SRCSEL_DEFVAL                                            0x00001500
+#define CRL_APB_PCAP_CTRL_SRCSEL_SHIFT                                             0
+#define CRL_APB_PCAP_CTRL_SRCSEL_MASK                                              0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_LPD_SWITCH_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_LPD_SWITCH_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_LPD_SWITCH_CTRL_CLKACT_MASK 
+#define CRL_APB_LPD_SWITCH_CTRL_CLKACT_DEFVAL                                      0x01000500
+#define CRL_APB_LPD_SWITCH_CTRL_CLKACT_SHIFT                                       24
+#define CRL_APB_LPD_SWITCH_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_MASK 
+#define CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_DEFVAL                                    0x01000500
+#define CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_SHIFT                                     8
+#define CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_LPD_SWITCH_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_LPD_SWITCH_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_LPD_SWITCH_CTRL_SRCSEL_MASK 
+#define CRL_APB_LPD_SWITCH_CTRL_SRCSEL_DEFVAL                                      0x01000500
+#define CRL_APB_LPD_SWITCH_CTRL_SRCSEL_SHIFT                                       0
+#define CRL_APB_LPD_SWITCH_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_LPD_LSBUS_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_LPD_LSBUS_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_LPD_LSBUS_CTRL_CLKACT_MASK 
+#define CRL_APB_LPD_LSBUS_CTRL_CLKACT_DEFVAL                                       0x01001800
+#define CRL_APB_LPD_LSBUS_CTRL_CLKACT_SHIFT                                        24
+#define CRL_APB_LPD_LSBUS_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_MASK 
+#define CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_DEFVAL                                     0x01001800
+#define CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_SHIFT                                      8
+#define CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_LPD_LSBUS_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_LPD_LSBUS_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_LPD_LSBUS_CTRL_SRCSEL_MASK 
+#define CRL_APB_LPD_LSBUS_CTRL_SRCSEL_DEFVAL                                       0x01001800
+#define CRL_APB_LPD_LSBUS_CTRL_SRCSEL_SHIFT                                        0
+#define CRL_APB_LPD_LSBUS_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_DBG_LPD_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_DBG_LPD_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_DBG_LPD_CTRL_CLKACT_MASK 
+#define CRL_APB_DBG_LPD_CTRL_CLKACT_DEFVAL                                         0x01002000
+#define CRL_APB_DBG_LPD_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_DBG_LPD_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_DBG_LPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_DBG_LPD_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_DBG_LPD_CTRL_DIVISOR0_MASK 
+#define CRL_APB_DBG_LPD_CTRL_DIVISOR0_DEFVAL                                       0x01002000
+#define CRL_APB_DBG_LPD_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_DBG_LPD_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_DBG_LPD_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK 
+#define CRL_APB_DBG_LPD_CTRL_SRCSEL_DEFVAL                                         0x01002000
+#define CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL                                        0x00052000
+#define CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_NAND_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL                                      0x00052000
+#define CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT                                       16
+#define CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK                                        0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL                                      0x00052000
+#define CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_NAND_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL                                        0x00052000
+#define CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_NAND_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_ADMA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_ADMA_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_ADMA_REF_CTRL_CLKACT_DEFVAL                                        0x00002000
+#define CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRL_APB_ADMA_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_ADMA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_ADMA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_ADMA_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_ADMA_REF_CTRL_DIVISOR0_DEFVAL                                      0x00002000
+#define CRL_APB_ADMA_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRL_APB_ADMA_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_ADMA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_ADMA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_ADMA_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_ADMA_REF_CTRL_SRCSEL_DEFVAL                                        0x00002000
+#define CRL_APB_ADMA_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRL_APB_ADMA_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL0_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL0_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL0_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL0_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL0_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL0_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL0_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL0_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL0_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL0_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL0_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL0_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL0_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL1_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL1_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL1_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL1_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL1_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL1_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL1_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL1_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL1_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL1_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL1_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL1_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL1_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL1_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL1_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL1_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL2_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL2_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL2_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL2_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL2_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL2_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL2_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL2_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL2_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL2_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL2_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL2_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL2_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL2_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL2_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL2_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_PL3_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_PL3_REF_CTRL_CLKACT_DEFVAL                                         0x00052000
+#define CRL_APB_PL3_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_PL3_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_PL3_REF_CTRL_DIVISOR1_DEFVAL                                       0x00052000
+#define CRL_APB_PL3_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_PL3_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_PL3_REF_CTRL_DIVISOR0_DEFVAL                                       0x00052000
+#define CRL_APB_PL3_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_PL3_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_PL3_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_PL3_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_PL3_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_PL3_REF_CTRL_SRCSEL_DEFVAL                                         0x00052000
+#define CRL_APB_PL3_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_PL3_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR1_MASK 
+#define CRL_APB_AMS_REF_CTRL_DIVISOR1_DEFVAL                                       0x01001800
+#define CRL_APB_AMS_REF_CTRL_DIVISOR1_SHIFT                                        16
+#define CRL_APB_AMS_REF_CTRL_DIVISOR1_MASK                                         0x003F0000U
+
+/*6 bit divider*/
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_AMS_REF_CTRL_DIVISOR0_DEFVAL                                       0x01001800
+#define CRL_APB_AMS_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRL_APB_AMS_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
+		clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_AMS_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_AMS_REF_CTRL_SRCSEL_DEFVAL                                         0x01001800
+#define CRL_APB_AMS_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_AMS_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_AMS_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_AMS_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_AMS_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_AMS_REF_CTRL_CLKACT_DEFVAL                                         0x01001800
+#define CRL_APB_AMS_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRL_APB_AMS_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*000 = IOPLL; 001 = RPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This
+		is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_DLL_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_DLL_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_DLL_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_DLL_REF_CTRL_SRCSEL_DEFVAL                                         0x00000000
+#define CRL_APB_DLL_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRL_APB_DLL_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*6 bit divider*/
+#undef CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_MASK 
+#define CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_DEFVAL                                 0x00001800
+#define CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_SHIFT                                  8
+#define CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_MASK                                   0x00003F00U
+
+/*1XX = pss_ref_clk; 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 
+		 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_SHIFT 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_MASK 
+#define CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_DEFVAL                                   0x00001800
+#define CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_SHIFT                                    0
+#define CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_MASK                                     0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_DEFVAL 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_SHIFT 
+#undef CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_MASK 
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_DEFVAL                                   0x00001800
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_SHIFT                                    24
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_MASK                                     0x01000000U
+
+/*000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_SATA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_SATA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_SATA_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_SATA_REF_CTRL_SRCSEL_DEFVAL                                        0x01001600
+#define CRF_APB_SATA_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRF_APB_SATA_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_SATA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_SATA_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_SATA_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_SATA_REF_CTRL_CLKACT_DEFVAL                                        0x01001600
+#define CRF_APB_SATA_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRF_APB_SATA_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_SATA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_SATA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_SATA_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_SATA_REF_CTRL_DIVISOR0_DEFVAL                                      0x01001600
+#define CRF_APB_SATA_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRF_APB_SATA_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = RPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cyc
+		es of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_PCIE_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_PCIE_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_PCIE_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_PCIE_REF_CTRL_SRCSEL_DEFVAL                                        0x00001500
+#define CRF_APB_PCIE_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRF_APB_PCIE_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_PCIE_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_PCIE_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_PCIE_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_PCIE_REF_CTRL_CLKACT_DEFVAL                                        0x00001500
+#define CRF_APB_PCIE_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRF_APB_PCIE_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_PCIE_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_PCIE_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_PCIE_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_PCIE_REF_CTRL_DIVISOR0_DEFVAL                                      0x00001500
+#define CRF_APB_PCIE_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRF_APB_PCIE_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_DEFVAL                                  0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_DEFVAL                                  0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_DEFVAL                                    0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_DEFVAL                                    0x01002300
+#define CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_SHIFT                                     24
+#define CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_MASK                                      0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_DEFVAL                                  0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_SHIFT                                   16
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_MASK                                    0x003F0000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_DEFVAL                                  0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_SHIFT                                   8
+#define CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_MASK                                    0x00003F00U
+
+/*000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
+		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_DEFVAL                                    0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_SHIFT                                     0
+#define CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_MASK                                      0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_DEFVAL                                    0x01032300
+#define CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_SHIFT                                     24
+#define CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_MASK                                      0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR1_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR1_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR1_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR1_DEFVAL                                    0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR1_SHIFT                                     16
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR1_MASK                                      0x003F0000U
+
+/*6 bit divider*/
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR0_DEFVAL                                    0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR0_SHIFT                                     8
+#define CRF_APB_DP_STC_REF_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of t
+		e new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DP_STC_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_SRCSEL_DEFVAL                                      0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_SRCSEL_SHIFT                                       0
+#define CRF_APB_DP_STC_REF_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DP_STC_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DP_STC_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DP_STC_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DP_STC_REF_CTRL_CLKACT_DEFVAL                                      0x01203200
+#define CRF_APB_DP_STC_REF_CTRL_CLKACT_SHIFT                                       24
+#define CRF_APB_DP_STC_REF_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_ACPU_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_ACPU_CTRL_DIVISOR0_MASK 
+#define CRF_APB_ACPU_CTRL_DIVISOR0_DEFVAL                                          0x03000400
+#define CRF_APB_ACPU_CTRL_DIVISOR0_SHIFT                                           8
+#define CRF_APB_ACPU_CTRL_DIVISOR0_MASK                                            0x00003F00U
+
+/*000 = APLL; 010 = DPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_ACPU_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_ACPU_CTRL_SRCSEL_MASK 
+#define CRF_APB_ACPU_CTRL_SRCSEL_DEFVAL                                            0x03000400
+#define CRF_APB_ACPU_CTRL_SRCSEL_SHIFT                                             0
+#define CRF_APB_ACPU_CTRL_SRCSEL_MASK                                              0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock. For the half speed APU Clock*/
+#undef CRF_APB_ACPU_CTRL_CLKACT_HALF_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_CLKACT_HALF_SHIFT 
+#undef CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK 
+#define CRF_APB_ACPU_CTRL_CLKACT_HALF_DEFVAL                                       0x03000400
+#define CRF_APB_ACPU_CTRL_CLKACT_HALF_SHIFT                                        25
+#define CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK                                         0x02000000U
+
+/*Clock active signal. Switch to 0 to disable the clock. For the full speed ACPUX Clock. This will shut off the high speed cloc
+		 to the entire APU*/
+#undef CRF_APB_ACPU_CTRL_CLKACT_FULL_DEFVAL 
+#undef CRF_APB_ACPU_CTRL_CLKACT_FULL_SHIFT 
+#undef CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK 
+#define CRF_APB_ACPU_CTRL_CLKACT_FULL_DEFVAL                                       0x03000400
+#define CRF_APB_ACPU_CTRL_CLKACT_FULL_SHIFT                                        24
+#define CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DBG_TRACE_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DBG_TRACE_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DBG_TRACE_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DBG_TRACE_CTRL_DIVISOR0_DEFVAL                                     0x00002500
+#define CRF_APB_DBG_TRACE_CTRL_DIVISOR0_SHIFT                                      8
+#define CRF_APB_DBG_TRACE_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DBG_TRACE_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DBG_TRACE_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DBG_TRACE_CTRL_SRCSEL_MASK 
+#define CRF_APB_DBG_TRACE_CTRL_SRCSEL_DEFVAL                                       0x00002500
+#define CRF_APB_DBG_TRACE_CTRL_SRCSEL_SHIFT                                        0
+#define CRF_APB_DBG_TRACE_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DBG_TRACE_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DBG_TRACE_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DBG_TRACE_CTRL_CLKACT_MASK 
+#define CRF_APB_DBG_TRACE_CTRL_CLKACT_DEFVAL                                       0x00002500
+#define CRF_APB_DBG_TRACE_CTRL_CLKACT_SHIFT                                        24
+#define CRF_APB_DBG_TRACE_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DBG_FPD_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DBG_FPD_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DBG_FPD_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DBG_FPD_CTRL_DIVISOR0_DEFVAL                                       0x01002500
+#define CRF_APB_DBG_FPD_CTRL_DIVISOR0_SHIFT                                        8
+#define CRF_APB_DBG_FPD_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DBG_FPD_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DBG_FPD_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DBG_FPD_CTRL_SRCSEL_MASK 
+#define CRF_APB_DBG_FPD_CTRL_SRCSEL_DEFVAL                                         0x01002500
+#define CRF_APB_DBG_FPD_CTRL_SRCSEL_SHIFT                                          0
+#define CRF_APB_DBG_FPD_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DBG_FPD_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DBG_FPD_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DBG_FPD_CTRL_CLKACT_MASK 
+#define CRF_APB_DBG_FPD_CTRL_CLKACT_DEFVAL                                         0x01002500
+#define CRF_APB_DBG_FPD_CTRL_CLKACT_SHIFT                                          24
+#define CRF_APB_DBG_FPD_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DDR_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DDR_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DDR_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DDR_CTRL_DIVISOR0_DEFVAL                                           0x01000500
+#define CRF_APB_DDR_CTRL_DIVISOR0_SHIFT                                            8
+#define CRF_APB_DDR_CTRL_DIVISOR0_MASK                                             0x00003F00U
+
+/*000 = DPLL; 001 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This 
+		s not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DDR_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DDR_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DDR_CTRL_SRCSEL_MASK 
+#define CRF_APB_DDR_CTRL_SRCSEL_DEFVAL                                             0x01000500
+#define CRF_APB_DDR_CTRL_SRCSEL_SHIFT                                              0
+#define CRF_APB_DDR_CTRL_SRCSEL_MASK                                               0x00000007U
+
+/*6 bit divider*/
+#undef CRF_APB_GPU_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_GPU_REF_CTRL_DIVISOR0_DEFVAL                                       0x00001500
+#define CRF_APB_GPU_REF_CTRL_DIVISOR0_SHIFT                                        8
+#define CRF_APB_GPU_REF_CTRL_DIVISOR0_MASK                                         0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_GPU_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_GPU_REF_CTRL_SRCSEL_DEFVAL                                         0x00001500
+#define CRF_APB_GPU_REF_CTRL_SRCSEL_SHIFT                                          0
+#define CRF_APB_GPU_REF_CTRL_SRCSEL_MASK                                           0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock, which will stop clock for GPU (and both Pixel Processors).*/
+#undef CRF_APB_GPU_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_GPU_REF_CTRL_CLKACT_DEFVAL                                         0x00001500
+#define CRF_APB_GPU_REF_CTRL_CLKACT_SHIFT                                          24
+#define CRF_APB_GPU_REF_CTRL_CLKACT_MASK                                           0x01000000U
+
+/*Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor*/
+#undef CRF_APB_GPU_REF_CTRL_PP0_CLKACT_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_PP0_CLKACT_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_PP0_CLKACT_MASK 
+#define CRF_APB_GPU_REF_CTRL_PP0_CLKACT_DEFVAL                                     0x00001500
+#define CRF_APB_GPU_REF_CTRL_PP0_CLKACT_SHIFT                                      25
+#define CRF_APB_GPU_REF_CTRL_PP0_CLKACT_MASK                                       0x02000000U
+
+/*Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor*/
+#undef CRF_APB_GPU_REF_CTRL_PP1_CLKACT_DEFVAL 
+#undef CRF_APB_GPU_REF_CTRL_PP1_CLKACT_SHIFT 
+#undef CRF_APB_GPU_REF_CTRL_PP1_CLKACT_MASK 
+#define CRF_APB_GPU_REF_CTRL_PP1_CLKACT_DEFVAL                                     0x00001500
+#define CRF_APB_GPU_REF_CTRL_PP1_CLKACT_SHIFT                                      26
+#define CRF_APB_GPU_REF_CTRL_PP1_CLKACT_MASK                                       0x04000000U
+
+/*6 bit divider*/
+#undef CRF_APB_GDMA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_GDMA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_GDMA_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_GDMA_REF_CTRL_DIVISOR0_DEFVAL                                      0x01000500
+#define CRF_APB_GDMA_REF_CTRL_DIVISOR0_SHIFT                                       8
+#define CRF_APB_GDMA_REF_CTRL_DIVISOR0_MASK                                        0x00003F00U
+
+/*000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_GDMA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_GDMA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_GDMA_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_GDMA_REF_CTRL_SRCSEL_DEFVAL                                        0x01000500
+#define CRF_APB_GDMA_REF_CTRL_SRCSEL_SHIFT                                         0
+#define CRF_APB_GDMA_REF_CTRL_SRCSEL_MASK                                          0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_GDMA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_GDMA_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_GDMA_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_GDMA_REF_CTRL_CLKACT_DEFVAL                                        0x01000500
+#define CRF_APB_GDMA_REF_CTRL_CLKACT_SHIFT                                         24
+#define CRF_APB_GDMA_REF_CTRL_CLKACT_MASK                                          0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DPDMA_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DPDMA_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DPDMA_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DPDMA_REF_CTRL_DIVISOR0_DEFVAL                                     0x01000500
+#define CRF_APB_DPDMA_REF_CTRL_DIVISOR0_SHIFT                                      8
+#define CRF_APB_DPDMA_REF_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DPDMA_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DPDMA_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DPDMA_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_DPDMA_REF_CTRL_SRCSEL_DEFVAL                                       0x01000500
+#define CRF_APB_DPDMA_REF_CTRL_SRCSEL_SHIFT                                        0
+#define CRF_APB_DPDMA_REF_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_DPDMA_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_DPDMA_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_DPDMA_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_DPDMA_REF_CTRL_CLKACT_DEFVAL                                       0x01000500
+#define CRF_APB_DPDMA_REF_CTRL_CLKACT_SHIFT                                        24
+#define CRF_APB_DPDMA_REF_CTRL_CLKACT_MASK                                         0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_MASK 
+#define CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_DEFVAL                                    0x01000400
+#define CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_SHIFT                                     8
+#define CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_MASK                                      0x00003F00U
+
+/*000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
+		lock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_MASK 
+#define CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_DEFVAL                                      0x01000400
+#define CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_SHIFT                                       0
+#define CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_MASK                                        0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_TOPSW_MAIN_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_TOPSW_MAIN_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_TOPSW_MAIN_CTRL_CLKACT_MASK 
+#define CRF_APB_TOPSW_MAIN_CTRL_CLKACT_DEFVAL                                      0x01000400
+#define CRF_APB_TOPSW_MAIN_CTRL_CLKACT_SHIFT                                       24
+#define CRF_APB_TOPSW_MAIN_CTRL_CLKACT_MASK                                        0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_MASK 
+#define CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_DEFVAL                                   0x01000800
+#define CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*000 = APLL; 010 = IOPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_MASK 
+#define CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_DEFVAL                                     0x01000800
+#define CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_SHIFT                                      0
+#define CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_MASK                                       0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK 
+#define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_DEFVAL                                     0x01000800
+#define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT                                      24
+#define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK                                       0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK 
+#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL                                   0x00000800
+#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT                                    8
+#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK                                     0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK 
+#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL                                     0x00000800
+#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT                                      0
+#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK                                       0x00000007U
+
+/*Clock active signal. Switch to 0 to disable the clock*/
+#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL 
+#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT 
+#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK 
+#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL                                     0x00000800
+#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT                                      24
+#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK                                       0x01000000U
+
+/*6 bit divider*/
+#undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_DEFVAL 
+#undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT 
+#undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_MASK 
+#define CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_DEFVAL                                     0x00000A00
+#define CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT                                      8
+#define CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_MASK                                       0x00003F00U
+
+/*000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
+		he new clock. This is not usually an issue, but designers must be aware.)*/
+#undef CRF_APB_DBG_TSTMP_CTRL_SRCSEL_DEFVAL 
+#undef CRF_APB_DBG_TSTMP_CTRL_SRCSEL_SHIFT 
+#undef CRF_APB_DBG_TSTMP_CTRL_SRCSEL_MASK 
+#define CRF_APB_DBG_TSTMP_CTRL_SRCSEL_DEFVAL                                       0x00000A00
+#define CRF_APB_DBG_TSTMP_CTRL_SRCSEL_SHIFT                                        0
+#define CRF_APB_DBG_TSTMP_CTRL_SRCSEL_MASK                                         0x00000007U
+
+/*00" = Select the APB switch clock for the APB interface of TTC0'01" = Select the PLL ref clock for the APB interface of TTC0'
+		0" = Select the R5 clock for the APB interface of TTC0*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_SHIFT                                    0
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_MASK                                     0x00000003U
+
+/*00" = Select the APB switch clock for the APB interface of TTC1'01" = Select the PLL ref clock for the APB interface of TTC1'
+		0" = Select the R5 clock for the APB interface of TTC1*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_SHIFT                                    2
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_MASK                                     0x0000000CU
+
+/*00" = Select the APB switch clock for the APB interface of TTC2'01" = Select the PLL ref clock for the APB interface of TTC2'
+		0" = Select the R5 clock for the APB interface of TTC2*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_SHIFT                                    4
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_MASK                                     0x00000030U
+
+/*00" = Select the APB switch clock for the APB interface of TTC3'01" = Select the PLL ref clock for the APB interface of TTC3'
+		0" = Select the R5 clock for the APB interface of TTC3*/
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_DEFVAL 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_SHIFT 
+#undef IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_MASK 
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_SHIFT                                    6
+#define IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_MASK                                     0x000000C0U
+
+/*System watchdog timer clock source selection: 0: Internal APB clock 1: External (PL clock via EMIO or Pinout clock via MIO)*/
+#undef FPD_SLCR_WDT_CLK_SEL_SELECT_DEFVAL 
+#undef FPD_SLCR_WDT_CLK_SEL_SELECT_SHIFT 
+#undef FPD_SLCR_WDT_CLK_SEL_SELECT_MASK 
+#define FPD_SLCR_WDT_CLK_SEL_SELECT_DEFVAL                                         0x00000000
+#define FPD_SLCR_WDT_CLK_SEL_SELECT_SHIFT                                          0
+#define FPD_SLCR_WDT_CLK_SEL_SELECT_MASK                                           0x00000001U
+
+/*System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock from PL via EMIO, or from pinout 
+		ia MIO*/
+#undef IOU_SLCR_WDT_CLK_SEL_SELECT_DEFVAL 
+#undef IOU_SLCR_WDT_CLK_SEL_SELECT_SHIFT 
+#undef IOU_SLCR_WDT_CLK_SEL_SELECT_MASK 
+#define IOU_SLCR_WDT_CLK_SEL_SELECT_DEFVAL                                         0x00000000
+#define IOU_SLCR_WDT_CLK_SEL_SELECT_SHIFT                                          0
+#define IOU_SLCR_WDT_CLK_SEL_SELECT_MASK                                           0x00000001U
+
+/*System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock pss_ref_clk*/
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_DEFVAL 
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_SHIFT 
+#undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_MASK 
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_DEFVAL                                  0x00000000
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_SHIFT                                   0
+#define LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_MASK                                    0x00000001U
+#undef CRF_APB_RST_DDR_SS_OFFSET 
+#define CRF_APB_RST_DDR_SS_OFFSET                                                  0XFD1A0108
+#undef DDRC_MSTR_OFFSET 
+#define DDRC_MSTR_OFFSET                                                           0XFD070000
+#undef DDRC_MRCTRL0_OFFSET 
+#define DDRC_MRCTRL0_OFFSET                                                        0XFD070010
+#undef DDRC_DERATEEN_OFFSET 
+#define DDRC_DERATEEN_OFFSET                                                       0XFD070020
+#undef DDRC_DERATEINT_OFFSET 
+#define DDRC_DERATEINT_OFFSET                                                      0XFD070024
+#undef DDRC_PWRCTL_OFFSET 
+#define DDRC_PWRCTL_OFFSET                                                         0XFD070030
+#undef DDRC_PWRTMG_OFFSET 
+#define DDRC_PWRTMG_OFFSET                                                         0XFD070034
+#undef DDRC_RFSHCTL0_OFFSET 
+#define DDRC_RFSHCTL0_OFFSET                                                       0XFD070050
+#undef DDRC_RFSHCTL3_OFFSET 
+#define DDRC_RFSHCTL3_OFFSET                                                       0XFD070060
+#undef DDRC_RFSHTMG_OFFSET 
+#define DDRC_RFSHTMG_OFFSET                                                        0XFD070064
+#undef DDRC_ECCCFG0_OFFSET 
+#define DDRC_ECCCFG0_OFFSET                                                        0XFD070070
+#undef DDRC_ECCCFG1_OFFSET 
+#define DDRC_ECCCFG1_OFFSET                                                        0XFD070074
+#undef DDRC_CRCPARCTL1_OFFSET 
+#define DDRC_CRCPARCTL1_OFFSET                                                     0XFD0700C4
+#undef DDRC_CRCPARCTL2_OFFSET 
+#define DDRC_CRCPARCTL2_OFFSET                                                     0XFD0700C8
+#undef DDRC_INIT0_OFFSET 
+#define DDRC_INIT0_OFFSET                                                          0XFD0700D0
+#undef DDRC_INIT1_OFFSET 
+#define DDRC_INIT1_OFFSET                                                          0XFD0700D4
+#undef DDRC_INIT2_OFFSET 
+#define DDRC_INIT2_OFFSET                                                          0XFD0700D8
+#undef DDRC_INIT3_OFFSET 
+#define DDRC_INIT3_OFFSET                                                          0XFD0700DC
+#undef DDRC_INIT4_OFFSET 
+#define DDRC_INIT4_OFFSET                                                          0XFD0700E0
+#undef DDRC_INIT5_OFFSET 
+#define DDRC_INIT5_OFFSET                                                          0XFD0700E4
+#undef DDRC_INIT6_OFFSET 
+#define DDRC_INIT6_OFFSET                                                          0XFD0700E8
+#undef DDRC_INIT7_OFFSET 
+#define DDRC_INIT7_OFFSET                                                          0XFD0700EC
+#undef DDRC_DIMMCTL_OFFSET 
+#define DDRC_DIMMCTL_OFFSET                                                        0XFD0700F0
+#undef DDRC_RANKCTL_OFFSET 
+#define DDRC_RANKCTL_OFFSET                                                        0XFD0700F4
+#undef DDRC_DRAMTMG0_OFFSET 
+#define DDRC_DRAMTMG0_OFFSET                                                       0XFD070100
+#undef DDRC_DRAMTMG1_OFFSET 
+#define DDRC_DRAMTMG1_OFFSET                                                       0XFD070104
+#undef DDRC_DRAMTMG2_OFFSET 
+#define DDRC_DRAMTMG2_OFFSET                                                       0XFD070108
+#undef DDRC_DRAMTMG3_OFFSET 
+#define DDRC_DRAMTMG3_OFFSET                                                       0XFD07010C
+#undef DDRC_DRAMTMG4_OFFSET 
+#define DDRC_DRAMTMG4_OFFSET                                                       0XFD070110
+#undef DDRC_DRAMTMG5_OFFSET 
+#define DDRC_DRAMTMG5_OFFSET                                                       0XFD070114
+#undef DDRC_DRAMTMG6_OFFSET 
+#define DDRC_DRAMTMG6_OFFSET                                                       0XFD070118
+#undef DDRC_DRAMTMG7_OFFSET 
+#define DDRC_DRAMTMG7_OFFSET                                                       0XFD07011C
+#undef DDRC_DRAMTMG8_OFFSET 
+#define DDRC_DRAMTMG8_OFFSET                                                       0XFD070120
+#undef DDRC_DRAMTMG9_OFFSET 
+#define DDRC_DRAMTMG9_OFFSET                                                       0XFD070124
+#undef DDRC_DRAMTMG11_OFFSET 
+#define DDRC_DRAMTMG11_OFFSET                                                      0XFD07012C
+#undef DDRC_DRAMTMG12_OFFSET 
+#define DDRC_DRAMTMG12_OFFSET                                                      0XFD070130
+#undef DDRC_ZQCTL0_OFFSET 
+#define DDRC_ZQCTL0_OFFSET                                                         0XFD070180
+#undef DDRC_ZQCTL1_OFFSET 
+#define DDRC_ZQCTL1_OFFSET                                                         0XFD070184
+#undef DDRC_DFITMG0_OFFSET 
+#define DDRC_DFITMG0_OFFSET                                                        0XFD070190
+#undef DDRC_DFITMG1_OFFSET 
+#define DDRC_DFITMG1_OFFSET                                                        0XFD070194
+#undef DDRC_DFILPCFG0_OFFSET 
+#define DDRC_DFILPCFG0_OFFSET                                                      0XFD070198
+#undef DDRC_DFILPCFG1_OFFSET 
+#define DDRC_DFILPCFG1_OFFSET                                                      0XFD07019C
+#undef DDRC_DFIUPD1_OFFSET 
+#define DDRC_DFIUPD1_OFFSET                                                        0XFD0701A4
+#undef DDRC_DFIMISC_OFFSET 
+#define DDRC_DFIMISC_OFFSET                                                        0XFD0701B0
+#undef DDRC_DFITMG2_OFFSET 
+#define DDRC_DFITMG2_OFFSET                                                        0XFD0701B4
+#undef DDRC_DBICTL_OFFSET 
+#define DDRC_DBICTL_OFFSET                                                         0XFD0701C0
+#undef DDRC_ADDRMAP0_OFFSET 
+#define DDRC_ADDRMAP0_OFFSET                                                       0XFD070200
+#undef DDRC_ADDRMAP1_OFFSET 
+#define DDRC_ADDRMAP1_OFFSET                                                       0XFD070204
+#undef DDRC_ADDRMAP2_OFFSET 
+#define DDRC_ADDRMAP2_OFFSET                                                       0XFD070208
+#undef DDRC_ADDRMAP3_OFFSET 
+#define DDRC_ADDRMAP3_OFFSET                                                       0XFD07020C
+#undef DDRC_ADDRMAP4_OFFSET 
+#define DDRC_ADDRMAP4_OFFSET                                                       0XFD070210
+#undef DDRC_ADDRMAP5_OFFSET 
+#define DDRC_ADDRMAP5_OFFSET                                                       0XFD070214
+#undef DDRC_ADDRMAP6_OFFSET 
+#define DDRC_ADDRMAP6_OFFSET                                                       0XFD070218
+#undef DDRC_ADDRMAP7_OFFSET 
+#define DDRC_ADDRMAP7_OFFSET                                                       0XFD07021C
+#undef DDRC_ADDRMAP8_OFFSET 
+#define DDRC_ADDRMAP8_OFFSET                                                       0XFD070220
+#undef DDRC_ADDRMAP9_OFFSET 
+#define DDRC_ADDRMAP9_OFFSET                                                       0XFD070224
+#undef DDRC_ADDRMAP10_OFFSET 
+#define DDRC_ADDRMAP10_OFFSET                                                      0XFD070228
+#undef DDRC_ADDRMAP11_OFFSET 
+#define DDRC_ADDRMAP11_OFFSET                                                      0XFD07022C
+#undef DDRC_ODTCFG_OFFSET 
+#define DDRC_ODTCFG_OFFSET                                                         0XFD070240
+#undef DDRC_ODTMAP_OFFSET 
+#define DDRC_ODTMAP_OFFSET                                                         0XFD070244
+#undef DDRC_SCHED_OFFSET 
+#define DDRC_SCHED_OFFSET                                                          0XFD070250
+#undef DDRC_PERFLPR1_OFFSET 
+#define DDRC_PERFLPR1_OFFSET                                                       0XFD070264
+#undef DDRC_PERFWR1_OFFSET 
+#define DDRC_PERFWR1_OFFSET                                                        0XFD07026C
+#undef DDRC_DQMAP5_OFFSET 
+#define DDRC_DQMAP5_OFFSET                                                         0XFD070294
+#undef DDRC_DBG0_OFFSET 
+#define DDRC_DBG0_OFFSET                                                           0XFD070300
+#undef DDRC_DBGCMD_OFFSET 
+#define DDRC_DBGCMD_OFFSET                                                         0XFD07030C
+#undef DDRC_SWCTL_OFFSET 
+#define DDRC_SWCTL_OFFSET                                                          0XFD070320
+#undef DDRC_PCCFG_OFFSET 
+#define DDRC_PCCFG_OFFSET                                                          0XFD070400
+#undef DDRC_PCFGR_0_OFFSET 
+#define DDRC_PCFGR_0_OFFSET                                                        0XFD070404
+#undef DDRC_PCFGW_0_OFFSET 
+#define DDRC_PCFGW_0_OFFSET                                                        0XFD070408
+#undef DDRC_PCTRL_0_OFFSET 
+#define DDRC_PCTRL_0_OFFSET                                                        0XFD070490
+#undef DDRC_PCFGQOS0_0_OFFSET 
+#define DDRC_PCFGQOS0_0_OFFSET                                                     0XFD070494
+#undef DDRC_PCFGQOS1_0_OFFSET 
+#define DDRC_PCFGQOS1_0_OFFSET                                                     0XFD070498
+#undef DDRC_PCFGR_1_OFFSET 
+#define DDRC_PCFGR_1_OFFSET                                                        0XFD0704B4
+#undef DDRC_PCFGW_1_OFFSET 
+#define DDRC_PCFGW_1_OFFSET                                                        0XFD0704B8
+#undef DDRC_PCTRL_1_OFFSET 
+#define DDRC_PCTRL_1_OFFSET                                                        0XFD070540
+#undef DDRC_PCFGQOS0_1_OFFSET 
+#define DDRC_PCFGQOS0_1_OFFSET                                                     0XFD070544
+#undef DDRC_PCFGQOS1_1_OFFSET 
+#define DDRC_PCFGQOS1_1_OFFSET                                                     0XFD070548
+#undef DDRC_PCFGR_2_OFFSET 
+#define DDRC_PCFGR_2_OFFSET                                                        0XFD070564
+#undef DDRC_PCFGW_2_OFFSET 
+#define DDRC_PCFGW_2_OFFSET                                                        0XFD070568
+#undef DDRC_PCTRL_2_OFFSET 
+#define DDRC_PCTRL_2_OFFSET                                                        0XFD0705F0
+#undef DDRC_PCFGQOS0_2_OFFSET 
+#define DDRC_PCFGQOS0_2_OFFSET                                                     0XFD0705F4
+#undef DDRC_PCFGQOS1_2_OFFSET 
+#define DDRC_PCFGQOS1_2_OFFSET                                                     0XFD0705F8
+#undef DDRC_PCFGR_3_OFFSET 
+#define DDRC_PCFGR_3_OFFSET                                                        0XFD070614
+#undef DDRC_PCFGW_3_OFFSET 
+#define DDRC_PCFGW_3_OFFSET                                                        0XFD070618
+#undef DDRC_PCTRL_3_OFFSET 
+#define DDRC_PCTRL_3_OFFSET                                                        0XFD0706A0
+#undef DDRC_PCFGQOS0_3_OFFSET 
+#define DDRC_PCFGQOS0_3_OFFSET                                                     0XFD0706A4
+#undef DDRC_PCFGQOS1_3_OFFSET 
+#define DDRC_PCFGQOS1_3_OFFSET                                                     0XFD0706A8
+#undef DDRC_PCFGWQOS0_3_OFFSET 
+#define DDRC_PCFGWQOS0_3_OFFSET                                                    0XFD0706AC
+#undef DDRC_PCFGWQOS1_3_OFFSET 
+#define DDRC_PCFGWQOS1_3_OFFSET                                                    0XFD0706B0
+#undef DDRC_PCFGR_4_OFFSET 
+#define DDRC_PCFGR_4_OFFSET                                                        0XFD0706C4
+#undef DDRC_PCFGW_4_OFFSET 
+#define DDRC_PCFGW_4_OFFSET                                                        0XFD0706C8
+#undef DDRC_PCTRL_4_OFFSET 
+#define DDRC_PCTRL_4_OFFSET                                                        0XFD070750
+#undef DDRC_PCFGQOS0_4_OFFSET 
+#define DDRC_PCFGQOS0_4_OFFSET                                                     0XFD070754
+#undef DDRC_PCFGQOS1_4_OFFSET 
+#define DDRC_PCFGQOS1_4_OFFSET                                                     0XFD070758
+#undef DDRC_PCFGWQOS0_4_OFFSET 
+#define DDRC_PCFGWQOS0_4_OFFSET                                                    0XFD07075C
+#undef DDRC_PCFGWQOS1_4_OFFSET 
+#define DDRC_PCFGWQOS1_4_OFFSET                                                    0XFD070760
+#undef DDRC_PCFGR_5_OFFSET 
+#define DDRC_PCFGR_5_OFFSET                                                        0XFD070774
+#undef DDRC_PCFGW_5_OFFSET 
+#define DDRC_PCFGW_5_OFFSET                                                        0XFD070778
+#undef DDRC_PCTRL_5_OFFSET 
+#define DDRC_PCTRL_5_OFFSET                                                        0XFD070800
+#undef DDRC_PCFGQOS0_5_OFFSET 
+#define DDRC_PCFGQOS0_5_OFFSET                                                     0XFD070804
+#undef DDRC_PCFGQOS1_5_OFFSET 
+#define DDRC_PCFGQOS1_5_OFFSET                                                     0XFD070808
+#undef DDRC_PCFGWQOS0_5_OFFSET 
+#define DDRC_PCFGWQOS0_5_OFFSET                                                    0XFD07080C
+#undef DDRC_PCFGWQOS1_5_OFFSET 
+#define DDRC_PCFGWQOS1_5_OFFSET                                                    0XFD070810
+#undef DDRC_SARBASE0_OFFSET 
+#define DDRC_SARBASE0_OFFSET                                                       0XFD070F04
+#undef DDRC_SARSIZE0_OFFSET 
+#define DDRC_SARSIZE0_OFFSET                                                       0XFD070F08
+#undef DDRC_SARBASE1_OFFSET 
+#define DDRC_SARBASE1_OFFSET                                                       0XFD070F0C
+#undef DDRC_SARSIZE1_OFFSET 
+#define DDRC_SARSIZE1_OFFSET                                                       0XFD070F10
+#undef DDRC_DFITMG0_SHADOW_OFFSET 
+#define DDRC_DFITMG0_SHADOW_OFFSET                                                 0XFD072190
+#undef CRF_APB_RST_DDR_SS_OFFSET 
+#define CRF_APB_RST_DDR_SS_OFFSET                                                  0XFD1A0108
+#undef DDR_PHY_PGCR0_OFFSET 
+#define DDR_PHY_PGCR0_OFFSET                                                       0XFD080010
+#undef DDR_PHY_PGCR2_OFFSET 
+#define DDR_PHY_PGCR2_OFFSET                                                       0XFD080018
+#undef DDR_PHY_PGCR5_OFFSET 
+#define DDR_PHY_PGCR5_OFFSET                                                       0XFD080024
+#undef DDR_PHY_PTR0_OFFSET 
+#define DDR_PHY_PTR0_OFFSET                                                        0XFD080040
+#undef DDR_PHY_PTR1_OFFSET 
+#define DDR_PHY_PTR1_OFFSET                                                        0XFD080044
+#undef DDR_PHY_DSGCR_OFFSET 
+#define DDR_PHY_DSGCR_OFFSET                                                       0XFD080090
+#undef DDR_PHY_DCR_OFFSET 
+#define DDR_PHY_DCR_OFFSET                                                         0XFD080100
+#undef DDR_PHY_DTPR0_OFFSET 
+#define DDR_PHY_DTPR0_OFFSET                                                       0XFD080110
+#undef DDR_PHY_DTPR1_OFFSET 
+#define DDR_PHY_DTPR1_OFFSET                                                       0XFD080114
+#undef DDR_PHY_DTPR2_OFFSET 
+#define DDR_PHY_DTPR2_OFFSET                                                       0XFD080118
+#undef DDR_PHY_DTPR3_OFFSET 
+#define DDR_PHY_DTPR3_OFFSET                                                       0XFD08011C
+#undef DDR_PHY_DTPR4_OFFSET 
+#define DDR_PHY_DTPR4_OFFSET                                                       0XFD080120
+#undef DDR_PHY_DTPR5_OFFSET 
+#define DDR_PHY_DTPR5_OFFSET                                                       0XFD080124
+#undef DDR_PHY_DTPR6_OFFSET 
+#define DDR_PHY_DTPR6_OFFSET                                                       0XFD080128
+#undef DDR_PHY_RDIMMGCR0_OFFSET 
+#define DDR_PHY_RDIMMGCR0_OFFSET                                                   0XFD080140
+#undef DDR_PHY_RDIMMGCR1_OFFSET 
+#define DDR_PHY_RDIMMGCR1_OFFSET                                                   0XFD080144
+#undef DDR_PHY_RDIMMCR1_OFFSET 
+#define DDR_PHY_RDIMMCR1_OFFSET                                                    0XFD080154
+#undef DDR_PHY_MR0_OFFSET 
+#define DDR_PHY_MR0_OFFSET                                                         0XFD080180
+#undef DDR_PHY_MR1_OFFSET 
+#define DDR_PHY_MR1_OFFSET                                                         0XFD080184
+#undef DDR_PHY_MR2_OFFSET 
+#define DDR_PHY_MR2_OFFSET                                                         0XFD080188
+#undef DDR_PHY_MR3_OFFSET 
+#define DDR_PHY_MR3_OFFSET                                                         0XFD08018C
+#undef DDR_PHY_MR4_OFFSET 
+#define DDR_PHY_MR4_OFFSET                                                         0XFD080190
+#undef DDR_PHY_MR5_OFFSET 
+#define DDR_PHY_MR5_OFFSET                                                         0XFD080194
+#undef DDR_PHY_MR6_OFFSET 
+#define DDR_PHY_MR6_OFFSET                                                         0XFD080198
+#undef DDR_PHY_MR11_OFFSET 
+#define DDR_PHY_MR11_OFFSET                                                        0XFD0801AC
+#undef DDR_PHY_MR12_OFFSET 
+#define DDR_PHY_MR12_OFFSET                                                        0XFD0801B0
+#undef DDR_PHY_MR13_OFFSET 
+#define DDR_PHY_MR13_OFFSET                                                        0XFD0801B4
+#undef DDR_PHY_MR14_OFFSET 
+#define DDR_PHY_MR14_OFFSET                                                        0XFD0801B8
+#undef DDR_PHY_MR22_OFFSET 
+#define DDR_PHY_MR22_OFFSET                                                        0XFD0801D8
+#undef DDR_PHY_DTCR0_OFFSET 
+#define DDR_PHY_DTCR0_OFFSET                                                       0XFD080200
+#undef DDR_PHY_DTCR1_OFFSET 
+#define DDR_PHY_DTCR1_OFFSET                                                       0XFD080204
+#undef DDR_PHY_CATR0_OFFSET 
+#define DDR_PHY_CATR0_OFFSET                                                       0XFD080240
+#undef DDR_PHY_RIOCR5_OFFSET 
+#define DDR_PHY_RIOCR5_OFFSET                                                      0XFD0804F4
+#undef DDR_PHY_ACIOCR0_OFFSET 
+#define DDR_PHY_ACIOCR0_OFFSET                                                     0XFD080500
+#undef DDR_PHY_ACIOCR2_OFFSET 
+#define DDR_PHY_ACIOCR2_OFFSET                                                     0XFD080508
+#undef DDR_PHY_ACIOCR3_OFFSET 
+#define DDR_PHY_ACIOCR3_OFFSET                                                     0XFD08050C
+#undef DDR_PHY_ACIOCR4_OFFSET 
+#define DDR_PHY_ACIOCR4_OFFSET                                                     0XFD080510
+#undef DDR_PHY_IOVCR0_OFFSET 
+#define DDR_PHY_IOVCR0_OFFSET                                                      0XFD080520
+#undef DDR_PHY_VTCR0_OFFSET 
+#define DDR_PHY_VTCR0_OFFSET                                                       0XFD080528
+#undef DDR_PHY_VTCR1_OFFSET 
+#define DDR_PHY_VTCR1_OFFSET                                                       0XFD08052C
+#undef DDR_PHY_ACBDLR6_OFFSET 
+#define DDR_PHY_ACBDLR6_OFFSET                                                     0XFD080558
+#undef DDR_PHY_ACBDLR7_OFFSET 
+#define DDR_PHY_ACBDLR7_OFFSET                                                     0XFD08055C
+#undef DDR_PHY_ACBDLR8_OFFSET 
+#define DDR_PHY_ACBDLR8_OFFSET                                                     0XFD080560
+#undef DDR_PHY_ZQCR_OFFSET 
+#define DDR_PHY_ZQCR_OFFSET                                                        0XFD080680
+#undef DDR_PHY_ZQ0PR0_OFFSET 
+#define DDR_PHY_ZQ0PR0_OFFSET                                                      0XFD080684
+#undef DDR_PHY_ZQ0OR0_OFFSET 
+#define DDR_PHY_ZQ0OR0_OFFSET                                                      0XFD080694
+#undef DDR_PHY_ZQ0OR1_OFFSET 
+#define DDR_PHY_ZQ0OR1_OFFSET                                                      0XFD080698
+#undef DDR_PHY_ZQ1PR0_OFFSET 
+#define DDR_PHY_ZQ1PR0_OFFSET                                                      0XFD0806A4
+#undef DDR_PHY_DX0GCR0_OFFSET 
+#define DDR_PHY_DX0GCR0_OFFSET                                                     0XFD080700
+#undef DDR_PHY_DX0GCR4_OFFSET 
+#define DDR_PHY_DX0GCR4_OFFSET                                                     0XFD080710
+#undef DDR_PHY_DX0GCR5_OFFSET 
+#define DDR_PHY_DX0GCR5_OFFSET                                                     0XFD080714
+#undef DDR_PHY_DX0GCR6_OFFSET 
+#define DDR_PHY_DX0GCR6_OFFSET                                                     0XFD080718
+#undef DDR_PHY_DX0LCDLR2_OFFSET 
+#define DDR_PHY_DX0LCDLR2_OFFSET                                                   0XFD080788
+#undef DDR_PHY_DX0GTR0_OFFSET 
+#define DDR_PHY_DX0GTR0_OFFSET                                                     0XFD0807C0
+#undef DDR_PHY_DX1GCR0_OFFSET 
+#define DDR_PHY_DX1GCR0_OFFSET                                                     0XFD080800
+#undef DDR_PHY_DX1GCR4_OFFSET 
+#define DDR_PHY_DX1GCR4_OFFSET                                                     0XFD080810
+#undef DDR_PHY_DX1GCR5_OFFSET 
+#define DDR_PHY_DX1GCR5_OFFSET                                                     0XFD080814
+#undef DDR_PHY_DX1GCR6_OFFSET 
+#define DDR_PHY_DX1GCR6_OFFSET                                                     0XFD080818
+#undef DDR_PHY_DX1LCDLR2_OFFSET 
+#define DDR_PHY_DX1LCDLR2_OFFSET                                                   0XFD080888
+#undef DDR_PHY_DX1GTR0_OFFSET 
+#define DDR_PHY_DX1GTR0_OFFSET                                                     0XFD0808C0
+#undef DDR_PHY_DX2GCR0_OFFSET 
+#define DDR_PHY_DX2GCR0_OFFSET                                                     0XFD080900
+#undef DDR_PHY_DX2GCR1_OFFSET 
+#define DDR_PHY_DX2GCR1_OFFSET                                                     0XFD080904
+#undef DDR_PHY_DX2GCR4_OFFSET 
+#define DDR_PHY_DX2GCR4_OFFSET                                                     0XFD080910
+#undef DDR_PHY_DX2GCR5_OFFSET 
+#define DDR_PHY_DX2GCR5_OFFSET                                                     0XFD080914
+#undef DDR_PHY_DX2GCR6_OFFSET 
+#define DDR_PHY_DX2GCR6_OFFSET                                                     0XFD080918
+#undef DDR_PHY_DX2LCDLR2_OFFSET 
+#define DDR_PHY_DX2LCDLR2_OFFSET                                                   0XFD080988
+#undef DDR_PHY_DX2GTR0_OFFSET 
+#define DDR_PHY_DX2GTR0_OFFSET                                                     0XFD0809C0
+#undef DDR_PHY_DX3GCR0_OFFSET 
+#define DDR_PHY_DX3GCR0_OFFSET                                                     0XFD080A00
+#undef DDR_PHY_DX3GCR1_OFFSET 
+#define DDR_PHY_DX3GCR1_OFFSET                                                     0XFD080A04
+#undef DDR_PHY_DX3GCR4_OFFSET 
+#define DDR_PHY_DX3GCR4_OFFSET                                                     0XFD080A10
+#undef DDR_PHY_DX3GCR5_OFFSET 
+#define DDR_PHY_DX3GCR5_OFFSET                                                     0XFD080A14
+#undef DDR_PHY_DX3GCR6_OFFSET 
+#define DDR_PHY_DX3GCR6_OFFSET                                                     0XFD080A18
+#undef DDR_PHY_DX3LCDLR2_OFFSET 
+#define DDR_PHY_DX3LCDLR2_OFFSET                                                   0XFD080A88
+#undef DDR_PHY_DX3GTR0_OFFSET 
+#define DDR_PHY_DX3GTR0_OFFSET                                                     0XFD080AC0
+#undef DDR_PHY_DX4GCR0_OFFSET 
+#define DDR_PHY_DX4GCR0_OFFSET                                                     0XFD080B00
+#undef DDR_PHY_DX4GCR1_OFFSET 
+#define DDR_PHY_DX4GCR1_OFFSET                                                     0XFD080B04
+#undef DDR_PHY_DX4GCR4_OFFSET 
+#define DDR_PHY_DX4GCR4_OFFSET                                                     0XFD080B10
+#undef DDR_PHY_DX4GCR5_OFFSET 
+#define DDR_PHY_DX4GCR5_OFFSET                                                     0XFD080B14
+#undef DDR_PHY_DX4GCR6_OFFSET 
+#define DDR_PHY_DX4GCR6_OFFSET                                                     0XFD080B18
+#undef DDR_PHY_DX4LCDLR2_OFFSET 
+#define DDR_PHY_DX4LCDLR2_OFFSET                                                   0XFD080B88
+#undef DDR_PHY_DX4GTR0_OFFSET 
+#define DDR_PHY_DX4GTR0_OFFSET                                                     0XFD080BC0
+#undef DDR_PHY_DX5GCR0_OFFSET 
+#define DDR_PHY_DX5GCR0_OFFSET                                                     0XFD080C00
+#undef DDR_PHY_DX5GCR1_OFFSET 
+#define DDR_PHY_DX5GCR1_OFFSET                                                     0XFD080C04
+#undef DDR_PHY_DX5GCR4_OFFSET 
+#define DDR_PHY_DX5GCR4_OFFSET                                                     0XFD080C10
+#undef DDR_PHY_DX5GCR5_OFFSET 
+#define DDR_PHY_DX5GCR5_OFFSET                                                     0XFD080C14
+#undef DDR_PHY_DX5GCR6_OFFSET 
+#define DDR_PHY_DX5GCR6_OFFSET                                                     0XFD080C18
+#undef DDR_PHY_DX5LCDLR2_OFFSET 
+#define DDR_PHY_DX5LCDLR2_OFFSET                                                   0XFD080C88
+#undef DDR_PHY_DX5GTR0_OFFSET 
+#define DDR_PHY_DX5GTR0_OFFSET                                                     0XFD080CC0
+#undef DDR_PHY_DX6GCR0_OFFSET 
+#define DDR_PHY_DX6GCR0_OFFSET                                                     0XFD080D00
+#undef DDR_PHY_DX6GCR1_OFFSET 
+#define DDR_PHY_DX6GCR1_OFFSET                                                     0XFD080D04
+#undef DDR_PHY_DX6GCR4_OFFSET 
+#define DDR_PHY_DX6GCR4_OFFSET                                                     0XFD080D10
+#undef DDR_PHY_DX6GCR5_OFFSET 
+#define DDR_PHY_DX6GCR5_OFFSET                                                     0XFD080D14
+#undef DDR_PHY_DX6GCR6_OFFSET 
+#define DDR_PHY_DX6GCR6_OFFSET                                                     0XFD080D18
+#undef DDR_PHY_DX6LCDLR2_OFFSET 
+#define DDR_PHY_DX6LCDLR2_OFFSET                                                   0XFD080D88
+#undef DDR_PHY_DX6GTR0_OFFSET 
+#define DDR_PHY_DX6GTR0_OFFSET                                                     0XFD080DC0
+#undef DDR_PHY_DX7GCR0_OFFSET 
+#define DDR_PHY_DX7GCR0_OFFSET                                                     0XFD080E00
+#undef DDR_PHY_DX7GCR1_OFFSET 
+#define DDR_PHY_DX7GCR1_OFFSET                                                     0XFD080E04
+#undef DDR_PHY_DX7GCR4_OFFSET 
+#define DDR_PHY_DX7GCR4_OFFSET                                                     0XFD080E10
+#undef DDR_PHY_DX7GCR5_OFFSET 
+#define DDR_PHY_DX7GCR5_OFFSET                                                     0XFD080E14
+#undef DDR_PHY_DX7GCR6_OFFSET 
+#define DDR_PHY_DX7GCR6_OFFSET                                                     0XFD080E18
+#undef DDR_PHY_DX7LCDLR2_OFFSET 
+#define DDR_PHY_DX7LCDLR2_OFFSET                                                   0XFD080E88
+#undef DDR_PHY_DX7GTR0_OFFSET 
+#define DDR_PHY_DX7GTR0_OFFSET                                                     0XFD080EC0
+#undef DDR_PHY_DX8GCR0_OFFSET 
+#define DDR_PHY_DX8GCR0_OFFSET                                                     0XFD080F00
+#undef DDR_PHY_DX8GCR1_OFFSET 
+#define DDR_PHY_DX8GCR1_OFFSET                                                     0XFD080F04
+#undef DDR_PHY_DX8GCR4_OFFSET 
+#define DDR_PHY_DX8GCR4_OFFSET                                                     0XFD080F10
+#undef DDR_PHY_DX8GCR5_OFFSET 
+#define DDR_PHY_DX8GCR5_OFFSET                                                     0XFD080F14
+#undef DDR_PHY_DX8GCR6_OFFSET 
+#define DDR_PHY_DX8GCR6_OFFSET                                                     0XFD080F18
+#undef DDR_PHY_DX8LCDLR2_OFFSET 
+#define DDR_PHY_DX8LCDLR2_OFFSET                                                   0XFD080F88
+#undef DDR_PHY_DX8GTR0_OFFSET 
+#define DDR_PHY_DX8GTR0_OFFSET                                                     0XFD080FC0
+#undef DDR_PHY_DX8SL0DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL0DQSCTL_OFFSET                                                0XFD08141C
+#undef DDR_PHY_DX8SL0DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL0DXCTL2_OFFSET                                                0XFD08142C
+#undef DDR_PHY_DX8SL0IOCR_OFFSET 
+#define DDR_PHY_DX8SL0IOCR_OFFSET                                                  0XFD081430
+#undef DDR_PHY_DX8SL1DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL1DQSCTL_OFFSET                                                0XFD08145C
+#undef DDR_PHY_DX8SL1DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL1DXCTL2_OFFSET                                                0XFD08146C
+#undef DDR_PHY_DX8SL1IOCR_OFFSET 
+#define DDR_PHY_DX8SL1IOCR_OFFSET                                                  0XFD081470
+#undef DDR_PHY_DX8SL2DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL2DQSCTL_OFFSET                                                0XFD08149C
+#undef DDR_PHY_DX8SL2DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL2DXCTL2_OFFSET                                                0XFD0814AC
+#undef DDR_PHY_DX8SL2IOCR_OFFSET 
+#define DDR_PHY_DX8SL2IOCR_OFFSET                                                  0XFD0814B0
+#undef DDR_PHY_DX8SL3DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL3DQSCTL_OFFSET                                                0XFD0814DC
+#undef DDR_PHY_DX8SL3DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL3DXCTL2_OFFSET                                                0XFD0814EC
+#undef DDR_PHY_DX8SL3IOCR_OFFSET 
+#define DDR_PHY_DX8SL3IOCR_OFFSET                                                  0XFD0814F0
+#undef DDR_PHY_DX8SL4DQSCTL_OFFSET 
+#define DDR_PHY_DX8SL4DQSCTL_OFFSET                                                0XFD08151C
+#undef DDR_PHY_DX8SL4DXCTL2_OFFSET 
+#define DDR_PHY_DX8SL4DXCTL2_OFFSET                                                0XFD08152C
+#undef DDR_PHY_DX8SL4IOCR_OFFSET 
+#define DDR_PHY_DX8SL4IOCR_OFFSET                                                  0XFD081530
+#undef DDR_PHY_DX8SLBDQSCTL_OFFSET 
+#define DDR_PHY_DX8SLBDQSCTL_OFFSET                                                0XFD0817DC
+#undef DDR_PHY_PIR_OFFSET 
+#define DDR_PHY_PIR_OFFSET                                                         0XFD080004
+
+/*DDR block level reset inside of the DDR Sub System*/
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_MASK 
+#define CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL                                        0x0000000F
+#define CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT                                         3
+#define CRF_APB_RST_DDR_SS_DDR_RESET_MASK                                          0x00000008U
+
+/*Indicates the configuration of the device used in the system. - 00 - x4 device - 01 - x8 device - 10 - x16 device - 11 - x32 
+		evice*/
+#undef DDRC_MSTR_DEVICE_CONFIG_DEFVAL 
+#undef DDRC_MSTR_DEVICE_CONFIG_SHIFT 
+#undef DDRC_MSTR_DEVICE_CONFIG_MASK 
+#define DDRC_MSTR_DEVICE_CONFIG_DEFVAL                                             0x03040001
+#define DDRC_MSTR_DEVICE_CONFIG_SHIFT                                              30
+#define DDRC_MSTR_DEVICE_CONFIG_MASK                                               0xC0000000U
+
+/*Choose which registers are used. - 0 - Original registers - 1 - Shadow registers*/
+#undef DDRC_MSTR_FREQUENCY_MODE_DEFVAL 
+#undef DDRC_MSTR_FREQUENCY_MODE_SHIFT 
+#undef DDRC_MSTR_FREQUENCY_MODE_MASK 
+#define DDRC_MSTR_FREQUENCY_MODE_DEFVAL                                            0x03040001
+#define DDRC_MSTR_FREQUENCY_MODE_SHIFT                                             29
+#define DDRC_MSTR_FREQUENCY_MODE_MASK                                              0x20000000U
+
+/*Only present for multi-rank configurations. Each bit represents one rank. For two-rank configurations, only bits[25:24] are p
+		esent. - 1 - populated - 0 - unpopulated LSB is the lowest rank number. For 2 ranks following combinations are legal: - 01 - 
+		ne rank - 11 - Two ranks - Others - Reserved. For 4 ranks following combinations are legal: - 0001 - One rank - 0011 - Two ra
+		ks - 1111 - Four ranks*/
+#undef DDRC_MSTR_ACTIVE_RANKS_DEFVAL 
+#undef DDRC_MSTR_ACTIVE_RANKS_SHIFT 
+#undef DDRC_MSTR_ACTIVE_RANKS_MASK 
+#define DDRC_MSTR_ACTIVE_RANKS_DEFVAL                                              0x03040001
+#define DDRC_MSTR_ACTIVE_RANKS_SHIFT                                               24
+#define DDRC_MSTR_ACTIVE_RANKS_MASK                                                0x03000000U
+
+/*SDRAM burst length used: - 0001 - Burst length of 2 (only supported for mDDR) - 0010 - Burst length of 4 - 0100 - Burst lengt
+		 of 8 - 1000 - Burst length of 16 (only supported for mDDR, LPDDR2, and LPDDR4) All other values are reserved. This controls 
+		he burst size used to access the SDRAM. This must match the burst length mode register setting in the SDRAM. (For BC4/8 on-th
+		-fly mode of DDR3 and DDR4, set this field to 0x0100) Burst length of 2 is not supported with AXI ports when MEMC_BURST_LENGT
+		 is 8. Burst length of 2 is only supported with MEMC_FREQ_RATIO = 1*/
+#undef DDRC_MSTR_BURST_RDWR_DEFVAL 
+#undef DDRC_MSTR_BURST_RDWR_SHIFT 
+#undef DDRC_MSTR_BURST_RDWR_MASK 
+#define DDRC_MSTR_BURST_RDWR_DEFVAL                                                0x03040001
+#define DDRC_MSTR_BURST_RDWR_SHIFT                                                 16
+#define DDRC_MSTR_BURST_RDWR_MASK                                                  0x000F0000U
+
+/*Set to 1 when the uMCTL2 and DRAM has to be put in DLL-off mode for low frequency operation. Set to 0 to put uMCTL2 and DRAM 
+		n DLL-on mode for normal frequency operation. If DDR4 CRC/parity retry is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), d
+		l_off_mode is not supported, and this bit must be set to '0'.*/
+#undef DDRC_MSTR_DLL_OFF_MODE_DEFVAL 
+#undef DDRC_MSTR_DLL_OFF_MODE_SHIFT 
+#undef DDRC_MSTR_DLL_OFF_MODE_MASK 
+#define DDRC_MSTR_DLL_OFF_MODE_DEFVAL                                              0x03040001
+#define DDRC_MSTR_DLL_OFF_MODE_SHIFT                                               15
+#define DDRC_MSTR_DLL_OFF_MODE_MASK                                                0x00008000U
+
+/*Selects proportion of DQ bus width that is used by the SDRAM - 00 - Full DQ bus width to SDRAM - 01 - Half DQ bus width to SD
+		AM - 10 - Quarter DQ bus width to SDRAM - 11 - Reserved. Note that half bus width mode is only supported when the SDRAM bus w
+		dth is a multiple of 16, and quarter bus width mode is only supported when the SDRAM bus width is a multiple of 32 and the co
+		figuration parameter MEMC_QBUS_SUPPORT is set. Bus width refers to DQ bus width (excluding any ECC width).*/
+#undef DDRC_MSTR_DATA_BUS_WIDTH_DEFVAL 
+#undef DDRC_MSTR_DATA_BUS_WIDTH_SHIFT 
+#undef DDRC_MSTR_DATA_BUS_WIDTH_MASK 
+#define DDRC_MSTR_DATA_BUS_WIDTH_DEFVAL                                            0x03040001
+#define DDRC_MSTR_DATA_BUS_WIDTH_SHIFT                                             12
+#define DDRC_MSTR_DATA_BUS_WIDTH_MASK                                              0x00003000U
+
+/*1 indicates put the DRAM in geardown mode (2N) and 0 indicates put the DRAM in normal mode (1N). This register can be changed
+		 only when the Controller is in self-refresh mode. This signal must be set the same value as MR3 bit A3. Note: Geardown mode 
+		s not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set*/
+#undef DDRC_MSTR_GEARDOWN_MODE_DEFVAL 
+#undef DDRC_MSTR_GEARDOWN_MODE_SHIFT 
+#undef DDRC_MSTR_GEARDOWN_MODE_MASK 
+#define DDRC_MSTR_GEARDOWN_MODE_DEFVAL                                             0x03040001
+#define DDRC_MSTR_GEARDOWN_MODE_SHIFT                                              11
+#define DDRC_MSTR_GEARDOWN_MODE_MASK                                               0x00000800U
+
+/*If 1, then uMCTL2 uses 2T timing. Otherwise, uses 1T timing. In 2T timing, all command signals (except chip select) are held 
+		or 2 clocks on the SDRAM bus. Chip select is asserted on the second cycle of the command Note: 2T timing is not supported in 
+		PDDR2/LPDDR3/LPDDR4 mode Note: 2T timing is not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set Note: 2T ti
+		ing is not supported in DDR4 geardown mode.*/
+#undef DDRC_MSTR_EN_2T_TIMING_MODE_DEFVAL 
+#undef DDRC_MSTR_EN_2T_TIMING_MODE_SHIFT 
+#undef DDRC_MSTR_EN_2T_TIMING_MODE_MASK 
+#define DDRC_MSTR_EN_2T_TIMING_MODE_DEFVAL                                         0x03040001
+#define DDRC_MSTR_EN_2T_TIMING_MODE_SHIFT                                          10
+#define DDRC_MSTR_EN_2T_TIMING_MODE_MASK                                           0x00000400U
+
+/*When set, enable burst-chop in DDR3/DDR4. Burst Chop for Reads is exercised only in HIF configurations (UMCTL2_INCL_ARB not s
+		t) and if in full bus width mode (MSTR.data_bus_width = 00). Burst Chop for Writes is exercised only if Partial Writes enable
+		 (UMCTL2_PARTIAL_WR=1) and if CRC is disabled (CRCPARCTL1.crc_enable = 0). If DDR4 CRC/parity retry is enabled (CRCPARCTL1.cr
+		_parity_retry_enable = 1), burst chop is not supported, and this bit must be set to '0'*/
+#undef DDRC_MSTR_BURSTCHOP_DEFVAL 
+#undef DDRC_MSTR_BURSTCHOP_SHIFT 
+#undef DDRC_MSTR_BURSTCHOP_MASK 
+#define DDRC_MSTR_BURSTCHOP_DEFVAL                                                 0x03040001
+#define DDRC_MSTR_BURSTCHOP_SHIFT                                                  9
+#define DDRC_MSTR_BURSTCHOP_MASK                                                   0x00000200U
+
+/*Select LPDDR4 SDRAM - 1 - LPDDR4 SDRAM device in use. - 0 - non-LPDDR4 device in use Present only in designs configured to su
+		port LPDDR4.*/
+#undef DDRC_MSTR_LPDDR4_DEFVAL 
+#undef DDRC_MSTR_LPDDR4_SHIFT 
+#undef DDRC_MSTR_LPDDR4_MASK 
+#define DDRC_MSTR_LPDDR4_DEFVAL                                                    0x03040001
+#define DDRC_MSTR_LPDDR4_SHIFT                                                     5
+#define DDRC_MSTR_LPDDR4_MASK                                                      0x00000020U
+
+/*Select DDR4 SDRAM - 1 - DDR4 SDRAM device in use. - 0 - non-DDR4 device in use Present only in designs configured to support 
+		DR4.*/
+#undef DDRC_MSTR_DDR4_DEFVAL 
+#undef DDRC_MSTR_DDR4_SHIFT 
+#undef DDRC_MSTR_DDR4_MASK 
+#define DDRC_MSTR_DDR4_DEFVAL                                                      0x03040001
+#define DDRC_MSTR_DDR4_SHIFT                                                       4
+#define DDRC_MSTR_DDR4_MASK                                                        0x00000010U
+
+/*Select LPDDR3 SDRAM - 1 - LPDDR3 SDRAM device in use. - 0 - non-LPDDR3 device in use Present only in designs configured to su
+		port LPDDR3.*/
+#undef DDRC_MSTR_LPDDR3_DEFVAL 
+#undef DDRC_MSTR_LPDDR3_SHIFT 
+#undef DDRC_MSTR_LPDDR3_MASK 
+#define DDRC_MSTR_LPDDR3_DEFVAL                                                    0x03040001
+#define DDRC_MSTR_LPDDR3_SHIFT                                                     3
+#define DDRC_MSTR_LPDDR3_MASK                                                      0x00000008U
+
+/*Select LPDDR2 SDRAM - 1 - LPDDR2 SDRAM device in use. - 0 - non-LPDDR2 device in use Present only in designs configured to su
+		port LPDDR2.*/
+#undef DDRC_MSTR_LPDDR2_DEFVAL 
+#undef DDRC_MSTR_LPDDR2_SHIFT 
+#undef DDRC_MSTR_LPDDR2_MASK 
+#define DDRC_MSTR_LPDDR2_DEFVAL                                                    0x03040001
+#define DDRC_MSTR_LPDDR2_SHIFT                                                     2
+#define DDRC_MSTR_LPDDR2_MASK                                                      0x00000004U
+
+/*Select DDR3 SDRAM - 1 - DDR3 SDRAM device in use - 0 - non-DDR3 SDRAM device in use Only present in designs that support DDR3
+		*/
+#undef DDRC_MSTR_DDR3_DEFVAL 
+#undef DDRC_MSTR_DDR3_SHIFT 
+#undef DDRC_MSTR_DDR3_MASK 
+#define DDRC_MSTR_DDR3_DEFVAL                                                      0x03040001
+#define DDRC_MSTR_DDR3_SHIFT                                                       0
+#define DDRC_MSTR_DDR3_MASK                                                        0x00000001U
+
+/*Setting this register bit to 1 triggers a mode register read or write operation. When the MR operation is complete, the uMCTL
+		 automatically clears this bit. The other register fields of this register must be written in a separate APB transaction, bef
+		re setting this mr_wr bit. It is recommended NOT to set this signal if in Init, Deep power-down or MPSM operating modes.*/
+#undef DDRC_MRCTRL0_MR_WR_DEFVAL 
+#undef DDRC_MRCTRL0_MR_WR_SHIFT 
+#undef DDRC_MRCTRL0_MR_WR_MASK 
+#define DDRC_MRCTRL0_MR_WR_DEFVAL                                                  0x00000030
+#define DDRC_MRCTRL0_MR_WR_SHIFT                                                   31
+#define DDRC_MRCTRL0_MR_WR_MASK                                                    0x80000000U
+
+/*Address of the mode register that is to be written to. - 0000 - MR0 - 0001 - MR1 - 0010 - MR2 - 0011 - MR3 - 0100 - MR4 - 010
+		 - MR5 - 0110 - MR6 - 0111 - MR7 Don't Care for LPDDR2/LPDDR3/LPDDR4 (see MRCTRL1.mr_data for mode register addressing in LPD
+		R2/LPDDR3/LPDDR4) This signal is also used for writing to control words of RDIMMs. In that case, it corresponds to the bank a
+		dress bits sent to the RDIMM In case of DDR4, the bit[3:2] corresponds to the bank group bits. Therefore, the bit[3] as well 
+		s the bit[2:0] must be set to an appropriate value which is considered both the Address Mirroring of UDIMMs/RDIMMs and the Ou
+		put Inversion of RDIMMs.*/
+#undef DDRC_MRCTRL0_MR_ADDR_DEFVAL 
+#undef DDRC_MRCTRL0_MR_ADDR_SHIFT 
+#undef DDRC_MRCTRL0_MR_ADDR_MASK 
+#define DDRC_MRCTRL0_MR_ADDR_DEFVAL                                                0x00000030
+#define DDRC_MRCTRL0_MR_ADDR_SHIFT                                                 12
+#define DDRC_MRCTRL0_MR_ADDR_MASK                                                  0x0000F000U
+
+/*Controls which rank is accessed by MRCTRL0.mr_wr. Normally, it is desired to access all ranks, so all bits should be set to 1
+		 However, for multi-rank UDIMMs/RDIMMs which implement address mirroring, it may be necessary to access ranks individually. E
+		amples (assume uMCTL2 is configured for 4 ranks): - 0x1 - select rank 0 only - 0x2 - select rank 1 only - 0x5 - select ranks 
+		 and 2 - 0xA - select ranks 1 and 3 - 0xF - select ranks 0, 1, 2 and 3*/
+#undef DDRC_MRCTRL0_MR_RANK_DEFVAL 
+#undef DDRC_MRCTRL0_MR_RANK_SHIFT 
+#undef DDRC_MRCTRL0_MR_RANK_MASK 
+#define DDRC_MRCTRL0_MR_RANK_DEFVAL                                                0x00000030
+#define DDRC_MRCTRL0_MR_RANK_SHIFT                                                 4
+#define DDRC_MRCTRL0_MR_RANK_MASK                                                  0x00000030U
+
+/*Indicates whether Software intervention is allowed via MRCTRL0/MRCTRL1 before automatic SDRAM initialization routine or not. 
+		or DDR4, this bit can be used to initialize the DDR4 RCD (MR7) before automatic SDRAM initialization. For LPDDR4, this bit ca
+		 be used to program additional mode registers before automatic SDRAM initialization if necessary. Note: This must be cleared 
+		o 0 after completing Software operation. Otherwise, SDRAM initialization routine will not re-start. - 0 - Software interventi
+		n is not allowed - 1 - Software intervention is allowed*/
+#undef DDRC_MRCTRL0_SW_INIT_INT_DEFVAL 
+#undef DDRC_MRCTRL0_SW_INIT_INT_SHIFT 
+#undef DDRC_MRCTRL0_SW_INIT_INT_MASK 
+#define DDRC_MRCTRL0_SW_INIT_INT_DEFVAL                                            0x00000030
+#define DDRC_MRCTRL0_SW_INIT_INT_SHIFT                                             3
+#define DDRC_MRCTRL0_SW_INIT_INT_MASK                                              0x00000008U
+
+/*Indicates whether the mode register operation is MRS in PDA mode or not - 0 - MRS - 1 - MRS in Per DRAM Addressability mode*/
+#undef DDRC_MRCTRL0_PDA_EN_DEFVAL 
+#undef DDRC_MRCTRL0_PDA_EN_SHIFT 
+#undef DDRC_MRCTRL0_PDA_EN_MASK 
+#define DDRC_MRCTRL0_PDA_EN_DEFVAL                                                 0x00000030
+#define DDRC_MRCTRL0_PDA_EN_SHIFT                                                  2
+#define DDRC_MRCTRL0_PDA_EN_MASK                                                   0x00000004U
+
+/*Indicates whether the mode register operation is MRS or WR/RD for MPR (only supported for DDR4) - 0 - MRS - 1 - WR/RD for MPR*/
+#undef DDRC_MRCTRL0_MPR_EN_DEFVAL 
+#undef DDRC_MRCTRL0_MPR_EN_SHIFT 
+#undef DDRC_MRCTRL0_MPR_EN_MASK 
+#define DDRC_MRCTRL0_MPR_EN_DEFVAL                                                 0x00000030
+#define DDRC_MRCTRL0_MPR_EN_SHIFT                                                  1
+#define DDRC_MRCTRL0_MPR_EN_MASK                                                   0x00000002U
+
+/*Indicates whether the mode register operation is read or write. Only used for LPDDR2/LPDDR3/LPDDR4/DDR4. - 0 - Write - 1 - Re
+		d*/
+#undef DDRC_MRCTRL0_MR_TYPE_DEFVAL 
+#undef DDRC_MRCTRL0_MR_TYPE_SHIFT 
+#undef DDRC_MRCTRL0_MR_TYPE_MASK 
+#define DDRC_MRCTRL0_MR_TYPE_DEFVAL                                                0x00000030
+#define DDRC_MRCTRL0_MR_TYPE_SHIFT                                                 0
+#define DDRC_MRCTRL0_MR_TYPE_MASK                                                  0x00000001U
+
+/*Derate value of tRC for LPDDR4 - 0 - Derating uses +1. - 1 - Derating uses +2. - 2 - Derating uses +3. - 3 - Derating uses +4
+		 Present only in designs configured to support LPDDR4. The required number of cycles for derating can be determined by dividi
+		g 3.75ns by the core_ddrc_core_clk period, and rounding up the next integer.*/
+#undef DDRC_DERATEEN_RC_DERATE_VALUE_DEFVAL 
+#undef DDRC_DERATEEN_RC_DERATE_VALUE_SHIFT 
+#undef DDRC_DERATEEN_RC_DERATE_VALUE_MASK 
+#define DDRC_DERATEEN_RC_DERATE_VALUE_DEFVAL                                       0x00000000
+#define DDRC_DERATEEN_RC_DERATE_VALUE_SHIFT                                        8
+#define DDRC_DERATEEN_RC_DERATE_VALUE_MASK                                         0x00000300U
+
+/*Derate byte Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 Indicates which byte of the MRR data is used f
+		r derating. The maximum valid value depends on MEMC_DRAM_TOTAL_DATA_WIDTH.*/
+#undef DDRC_DERATEEN_DERATE_BYTE_DEFVAL 
+#undef DDRC_DERATEEN_DERATE_BYTE_SHIFT 
+#undef DDRC_DERATEEN_DERATE_BYTE_MASK 
+#define DDRC_DERATEEN_DERATE_BYTE_DEFVAL                                           0x00000000
+#define DDRC_DERATEEN_DERATE_BYTE_SHIFT                                            4
+#define DDRC_DERATEEN_DERATE_BYTE_MASK                                             0x000000F0U
+
+/*Derate value - 0 - Derating uses +1. - 1 - Derating uses +2. Present only in designs configured to support LPDDR2/LPDDR3/LPDD
+		4 Set to 0 for all LPDDR2 speed grades as derating value of +1.875 ns is less than a core_ddrc_core_clk period. Can be 0 or 1
+		for LPDDR3/LPDDR4, depending if +1.875 ns is less than a core_ddrc_core_clk period or not.*/
+#undef DDRC_DERATEEN_DERATE_VALUE_DEFVAL 
+#undef DDRC_DERATEEN_DERATE_VALUE_SHIFT 
+#undef DDRC_DERATEEN_DERATE_VALUE_MASK 
+#define DDRC_DERATEEN_DERATE_VALUE_DEFVAL                                          0x00000000
+#define DDRC_DERATEEN_DERATE_VALUE_SHIFT                                           1
+#define DDRC_DERATEEN_DERATE_VALUE_MASK                                            0x00000002U
+
+/*Enables derating - 0 - Timing parameter derating is disabled - 1 - Timing parameter derating is enabled using MR4 read value.
+		Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 This field must be set to '0' for non-LPDDR2/LPDDR3/LPDDR4
+		mode.*/
+#undef DDRC_DERATEEN_DERATE_ENABLE_DEFVAL 
+#undef DDRC_DERATEEN_DERATE_ENABLE_SHIFT 
+#undef DDRC_DERATEEN_DERATE_ENABLE_MASK 
+#define DDRC_DERATEEN_DERATE_ENABLE_DEFVAL                                         0x00000000
+#define DDRC_DERATEEN_DERATE_ENABLE_SHIFT                                          0
+#define DDRC_DERATEEN_DERATE_ENABLE_MASK                                           0x00000001U
+
+/*Interval between two MR4 reads, used to derate the timing parameters. Present only in designs configured to support LPDDR2/LP
+		DR3/LPDDR4. This register must not be set to zero*/
+#undef DDRC_DERATEINT_MR4_READ_INTERVAL_DEFVAL 
+#undef DDRC_DERATEINT_MR4_READ_INTERVAL_SHIFT 
+#undef DDRC_DERATEINT_MR4_READ_INTERVAL_MASK 
+#define DDRC_DERATEINT_MR4_READ_INTERVAL_DEFVAL                                    
+#define DDRC_DERATEINT_MR4_READ_INTERVAL_SHIFT                                     0
+#define DDRC_DERATEINT_MR4_READ_INTERVAL_MASK                                      0xFFFFFFFFU
+
+/*Self refresh state is an intermediate state to enter to Self refresh power down state or exit Self refresh power down state f
+		r LPDDR4. This register controls transition from the Self refresh state. - 1 - Prohibit transition from Self refresh state - 
+		 - Allow transition from Self refresh state*/
+#undef DDRC_PWRCTL_STAY_IN_SELFREF_DEFVAL 
+#undef DDRC_PWRCTL_STAY_IN_SELFREF_SHIFT 
+#undef DDRC_PWRCTL_STAY_IN_SELFREF_MASK 
+#define DDRC_PWRCTL_STAY_IN_SELFREF_DEFVAL                                         0x00000000
+#define DDRC_PWRCTL_STAY_IN_SELFREF_SHIFT                                          6
+#define DDRC_PWRCTL_STAY_IN_SELFREF_MASK                                           0x00000040U
+
+/*A value of 1 to this register causes system to move to Self Refresh state immediately, as long as it is not in INIT or DPD/MP
+		M operating_mode. This is referred to as Software Entry/Exit to Self Refresh. - 1 - Software Entry to Self Refresh - 0 - Soft
+		are Exit from Self Refresh*/
+#undef DDRC_PWRCTL_SELFREF_SW_DEFVAL 
+#undef DDRC_PWRCTL_SELFREF_SW_SHIFT 
+#undef DDRC_PWRCTL_SELFREF_SW_MASK 
+#define DDRC_PWRCTL_SELFREF_SW_DEFVAL                                              0x00000000
+#define DDRC_PWRCTL_SELFREF_SW_SHIFT                                               5
+#define DDRC_PWRCTL_SELFREF_SW_MASK                                                0x00000020U
+
+/*When this is 1, the uMCTL2 puts the SDRAM into maximum power saving mode when the transaction store is empty. This register m
+		st be reset to '0' to bring uMCTL2 out of maximum power saving mode. Present only in designs configured to support DDR4. For 
+		on-DDR4, this register should not be set to 1. Note that MPSM is not supported when using a DWC DDR PHY, if the PHY parameter
+		DWC_AC_CS_USE is disabled, as the MPSM exit sequence requires the chip-select signal to toggle. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRCTL_MPSM_EN_DEFVAL 
+#undef DDRC_PWRCTL_MPSM_EN_SHIFT 
+#undef DDRC_PWRCTL_MPSM_EN_MASK 
+#define DDRC_PWRCTL_MPSM_EN_DEFVAL                                                 0x00000000
+#define DDRC_PWRCTL_MPSM_EN_SHIFT                                                  4
+#define DDRC_PWRCTL_MPSM_EN_MASK                                                   0x00000010U
+
+/*Enable the assertion of dfi_dram_clk_disable whenever a clock is not required by the SDRAM. If set to 0, dfi_dram_clk_disable
+		is never asserted. Assertion of dfi_dram_clk_disable is as follows: In DDR2/DDR3, can only be asserted in Self Refresh. In DD
+		4, can be asserted in following: - in Self Refresh. - in Maximum Power Saving Mode In mDDR/LPDDR2/LPDDR3, can be asserted in 
+		ollowing: - in Self Refresh - in Power Down - in Deep Power Down - during Normal operation (Clock Stop) In LPDDR4, can be ass
+		rted in following: - in Self Refresh Power Down - in Power Down - during Normal operation (Clock Stop)*/
+#undef DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_DEFVAL 
+#undef DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_SHIFT 
+#undef DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_MASK 
+#define DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_DEFVAL                                 0x00000000
+#define DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_SHIFT                                  3
+#define DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_MASK                                   0x00000008U
+
+/*When this is 1, uMCTL2 puts the SDRAM into deep power-down mode when the transaction store is empty. This register must be re
+		et to '0' to bring uMCTL2 out of deep power-down mode. Controller performs automatic SDRAM initialization on deep power-down 
+		xit. Present only in designs configured to support mDDR or LPDDR2 or LPDDR3. For non-mDDR/non-LPDDR2/non-LPDDR3, this registe
+		 should not be set to 1. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRCTL_DEEPPOWERDOWN_EN_DEFVAL 
+#undef DDRC_PWRCTL_DEEPPOWERDOWN_EN_SHIFT 
+#undef DDRC_PWRCTL_DEEPPOWERDOWN_EN_MASK 
+#define DDRC_PWRCTL_DEEPPOWERDOWN_EN_DEFVAL                                        0x00000000
+#define DDRC_PWRCTL_DEEPPOWERDOWN_EN_SHIFT                                         2
+#define DDRC_PWRCTL_DEEPPOWERDOWN_EN_MASK                                          0x00000004U
+
+/*If true then the uMCTL2 goes into power-down after a programmable number of cycles 'maximum idle clocks before power down' (P
+		RTMG.powerdown_to_x32). This register bit may be re-programmed during the course of normal operation.*/
+#undef DDRC_PWRCTL_POWERDOWN_EN_DEFVAL 
+#undef DDRC_PWRCTL_POWERDOWN_EN_SHIFT 
+#undef DDRC_PWRCTL_POWERDOWN_EN_MASK 
+#define DDRC_PWRCTL_POWERDOWN_EN_DEFVAL                                            0x00000000
+#define DDRC_PWRCTL_POWERDOWN_EN_SHIFT                                             1
+#define DDRC_PWRCTL_POWERDOWN_EN_MASK                                              0x00000002U
+
+/*If true then the uMCTL2 puts the SDRAM into Self Refresh after a programmable number of cycles 'maximum idle clocks before Se
+		f Refresh (PWRTMG.selfref_to_x32)'. This register bit may be re-programmed during the course of normal operation.*/
+#undef DDRC_PWRCTL_SELFREF_EN_DEFVAL 
+#undef DDRC_PWRCTL_SELFREF_EN_SHIFT 
+#undef DDRC_PWRCTL_SELFREF_EN_MASK 
+#define DDRC_PWRCTL_SELFREF_EN_DEFVAL                                              0x00000000
+#define DDRC_PWRCTL_SELFREF_EN_SHIFT                                               0
+#define DDRC_PWRCTL_SELFREF_EN_MASK                                                0x00000001U
+
+/*After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into Self Refresh. This must be enabled in 
+		he PWRCTL.selfref_en. Unit: Multiples of 32 clocks. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRTMG_SELFREF_TO_X32_DEFVAL 
+#undef DDRC_PWRTMG_SELFREF_TO_X32_SHIFT 
+#undef DDRC_PWRTMG_SELFREF_TO_X32_MASK 
+#define DDRC_PWRTMG_SELFREF_TO_X32_DEFVAL                                          0x00402010
+#define DDRC_PWRTMG_SELFREF_TO_X32_SHIFT                                           16
+#define DDRC_PWRTMG_SELFREF_TO_X32_MASK                                            0x00FF0000U
+
+/*Minimum deep power-down time. For mDDR, value from the JEDEC specification is 0 as mDDR exits from deep power-down mode immed
+		ately after PWRCTL.deeppowerdown_en is de-asserted. For LPDDR2/LPDDR3, value from the JEDEC specification is 500us. Unit: Mul
+		iples of 4096 clocks. Present only in designs configured to support mDDR, LPDDR2 or LPDDR3. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRTMG_T_DPD_X4096_DEFVAL 
+#undef DDRC_PWRTMG_T_DPD_X4096_SHIFT 
+#undef DDRC_PWRTMG_T_DPD_X4096_MASK 
+#define DDRC_PWRTMG_T_DPD_X4096_DEFVAL                                             0x00402010
+#define DDRC_PWRTMG_T_DPD_X4096_SHIFT                                              8
+#define DDRC_PWRTMG_T_DPD_X4096_MASK                                               0x0000FF00U
+
+/*After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into power-down. This must be enabled in th
+		 PWRCTL.powerdown_en. Unit: Multiples of 32 clocks FOR PERFORMANCE ONLY.*/
+#undef DDRC_PWRTMG_POWERDOWN_TO_X32_DEFVAL 
+#undef DDRC_PWRTMG_POWERDOWN_TO_X32_SHIFT 
+#undef DDRC_PWRTMG_POWERDOWN_TO_X32_MASK 
+#define DDRC_PWRTMG_POWERDOWN_TO_X32_DEFVAL                                        0x00402010
+#define DDRC_PWRTMG_POWERDOWN_TO_X32_SHIFT                                         0
+#define DDRC_PWRTMG_POWERDOWN_TO_X32_MASK                                          0x0000001FU
+
+/*Threshold value in number of clock cycles before the critical refresh or page timer expires. A critical refresh is to be issu
+		d before this threshold is reached. It is recommended that this not be changed from the default value, currently shown as 0x2
+		 It must always be less than internally used t_rfc_nom_x32. Note that, in LPDDR2/LPDDR3/LPDDR4, internally used t_rfc_nom_x32
+		may be equal to RFSHTMG.t_rfc_nom_x32>>2 if derating is enabled (DERATEEN.derate_enable=1). Otherwise, internally used t_rfc_
+		om_x32 will be equal to RFSHTMG.t_rfc_nom_x32. Unit: Multiples of 32 clocks.*/
+#undef DDRC_RFSHCTL0_REFRESH_MARGIN_DEFVAL 
+#undef DDRC_RFSHCTL0_REFRESH_MARGIN_SHIFT 
+#undef DDRC_RFSHCTL0_REFRESH_MARGIN_MASK 
+#define DDRC_RFSHCTL0_REFRESH_MARGIN_DEFVAL                                        0x00210000
+#define DDRC_RFSHCTL0_REFRESH_MARGIN_SHIFT                                         20
+#define DDRC_RFSHCTL0_REFRESH_MARGIN_MASK                                          0x00F00000U
+
+/*If the refresh timer (tRFCnom, also known as tREFI) has expired at least once, but it has not expired (RFSHCTL0.refresh_burst
+		1) times yet, then a speculative refresh may be performed. A speculative refresh is a refresh performed at a time when refres
+		 would be useful, but before it is absolutely required. When the SDRAM bus is idle for a period of time determined by this RF
+		HCTL0.refresh_to_x32 and the refresh timer has expired at least once since the last refresh, then a speculative refresh is pe
+		formed. Speculative refreshes continues successively until there are no refreshes pending or until new reads or writes are is
+		ued to the uMCTL2. FOR PERFORMANCE ONLY.*/
+#undef DDRC_RFSHCTL0_REFRESH_TO_X32_DEFVAL 
+#undef DDRC_RFSHCTL0_REFRESH_TO_X32_SHIFT 
+#undef DDRC_RFSHCTL0_REFRESH_TO_X32_MASK 
+#define DDRC_RFSHCTL0_REFRESH_TO_X32_DEFVAL                                        0x00210000
+#define DDRC_RFSHCTL0_REFRESH_TO_X32_SHIFT                                         12
+#define DDRC_RFSHCTL0_REFRESH_TO_X32_MASK                                          0x0001F000U
+
+/*The programmed value + 1 is the number of refresh timeouts that is allowed to accumulate before traffic is blocked and the re
+		reshes are forced to execute. Closing pages to perform a refresh is a one-time penalty that must be paid for each group of re
+		reshes. Therefore, performing refreshes in a burst reduces the per-refresh penalty of these page closings. Higher numbers for
+		RFSHCTL.refresh_burst slightly increases utilization; lower numbers decreases the worst-case latency associated with refreshe
+		. - 0 - single refresh - 1 - burst-of-2 refresh - 7 - burst-of-8 refresh For information on burst refresh feature refer to se
+		tion 3.9 of DDR2 JEDEC specification - JESD79-2F.pdf. For DDR2/3, the refresh is always per-rank and not per-bank. The rank r
+		fresh can be accumulated over 8*tREFI cycles using the burst refresh feature. In DDR4 mode, according to Fine Granularity fea
+		ure, 8 refreshes can be postponed in 1X mode, 16 refreshes in 2X mode and 32 refreshes in 4X mode. If using PHY-initiated upd
+		tes, care must be taken in the setting of RFSHCTL0.refresh_burst, to ensure that tRFCmax is not violated due to a PHY-initiat
+		d update occurring shortly before a refresh burst was due. In this situation, the refresh burst will be delayed until the PHY
+		initiated update is complete.*/
+#undef DDRC_RFSHCTL0_REFRESH_BURST_DEFVAL 
+#undef DDRC_RFSHCTL0_REFRESH_BURST_SHIFT 
+#undef DDRC_RFSHCTL0_REFRESH_BURST_MASK 
+#define DDRC_RFSHCTL0_REFRESH_BURST_DEFVAL                                         0x00210000
+#define DDRC_RFSHCTL0_REFRESH_BURST_SHIFT                                          4
+#define DDRC_RFSHCTL0_REFRESH_BURST_MASK                                           0x000001F0U
+
+/*- 1 - Per bank refresh; - 0 - All bank refresh. Per bank refresh allows traffic to flow to other banks. Per bank refresh is n
+		t supported by all LPDDR2 devices but should be supported by all LPDDR3/LPDDR4 devices. Present only in designs configured to
+		support LPDDR2/LPDDR3/LPDDR4*/
+#undef DDRC_RFSHCTL0_PER_BANK_REFRESH_DEFVAL 
+#undef DDRC_RFSHCTL0_PER_BANK_REFRESH_SHIFT 
+#undef DDRC_RFSHCTL0_PER_BANK_REFRESH_MASK 
+#define DDRC_RFSHCTL0_PER_BANK_REFRESH_DEFVAL                                      0x00210000
+#define DDRC_RFSHCTL0_PER_BANK_REFRESH_SHIFT                                       2
+#define DDRC_RFSHCTL0_PER_BANK_REFRESH_MASK                                        0x00000004U
+
+/*Fine Granularity Refresh Mode - 000 - Fixed 1x (Normal mode) - 001 - Fixed 2x - 010 - Fixed 4x - 101 - Enable on the fly 2x (
+		ot supported) - 110 - Enable on the fly 4x (not supported) - Everything else - reserved Note: The on-the-fly modes is not sup
+		orted in this version of the uMCTL2. Note: This must be set up while the Controller is in reset or while the Controller is in
+		self-refresh mode. Changing this during normal operation is not allowed. Making this a dynamic register will be supported in 
+		uture version of the uMCTL2.*/
+#undef DDRC_RFSHCTL3_REFRESH_MODE_DEFVAL 
+#undef DDRC_RFSHCTL3_REFRESH_MODE_SHIFT 
+#undef DDRC_RFSHCTL3_REFRESH_MODE_MASK 
+#define DDRC_RFSHCTL3_REFRESH_MODE_DEFVAL                                          0x00000000
+#define DDRC_RFSHCTL3_REFRESH_MODE_SHIFT                                           4
+#define DDRC_RFSHCTL3_REFRESH_MODE_MASK                                            0x00000070U
+
+/*Toggle this signal (either from 0 to 1 or from 1 to 0) to indicate that the refresh register(s) have been updated. The value 
+		s automatically updated when exiting reset, so it does not need to be toggled initially.*/
+#undef DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_DEFVAL 
+#undef DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_SHIFT 
+#undef DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_MASK 
+#define DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_DEFVAL                                  0x00000000
+#define DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_SHIFT                                   1
+#define DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_MASK                                    0x00000002U
+
+/*When '1', disable auto-refresh generated by the uMCTL2. When auto-refresh is disabled, the SoC core must generate refreshes u
+		ing the registers reg_ddrc_rank0_refresh, reg_ddrc_rank1_refresh, reg_ddrc_rank2_refresh and reg_ddrc_rank3_refresh. When dis
+		auto_refresh transitions from 0 to 1, any pending refreshes are immediately scheduled by the uMCTL2. If DDR4 CRC/parity retry
+		is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), disable auto-refresh is not supported, and this bit must be set to '0'. 
+		his register field is changeable on the fly.*/
+#undef DDRC_RFSHCTL3_DIS_AUTO_REFRESH_DEFVAL 
+#undef DDRC_RFSHCTL3_DIS_AUTO_REFRESH_SHIFT 
+#undef DDRC_RFSHCTL3_DIS_AUTO_REFRESH_MASK 
+#define DDRC_RFSHCTL3_DIS_AUTO_REFRESH_DEFVAL                                      0x00000000
+#define DDRC_RFSHCTL3_DIS_AUTO_REFRESH_SHIFT                                       0
+#define DDRC_RFSHCTL3_DIS_AUTO_REFRESH_MASK                                        0x00000001U
+
+/*tREFI: Average time interval between refreshes per rank (Specification: 7.8us for DDR2, DDR3 and DDR4. See JEDEC specificatio
+		 for mDDR, LPDDR2, LPDDR3 and LPDDR4). For LPDDR2/LPDDR3/LPDDR4: - if using all-bank refreshes (RFSHCTL0.per_bank_refresh = 0
+		, this register should be set to tREFIab - if using per-bank refreshes (RFSHCTL0.per_bank_refresh = 1), this register should 
+		e set to tREFIpb For configurations with MEMC_FREQ_RATIO=2, program this to (tREFI/2), no rounding up. In DDR4 mode, tREFI va
+		ue is different depending on the refresh mode. The user should program the appropriate value from the spec based on the value
+		programmed in the refresh mode register. Note that RFSHTMG.t_rfc_nom_x32 * 32 must be greater than RFSHTMG.t_rfc_min, and RFS
+		TMG.t_rfc_nom_x32 must be greater than 0x1. Unit: Multiples of 32 clocks.*/
+#undef DDRC_RFSHTMG_T_RFC_NOM_X32_DEFVAL 
+#undef DDRC_RFSHTMG_T_RFC_NOM_X32_SHIFT 
+#undef DDRC_RFSHTMG_T_RFC_NOM_X32_MASK 
+#define DDRC_RFSHTMG_T_RFC_NOM_X32_DEFVAL                                          0x0062008C
+#define DDRC_RFSHTMG_T_RFC_NOM_X32_SHIFT                                           16
+#define DDRC_RFSHTMG_T_RFC_NOM_X32_MASK                                            0x0FFF0000U
+
+/*Used only when LPDDR3 memory type is connected. Should only be changed when uMCTL2 is in reset. Specifies whether to use the 
+		REFBW parameter (required by some LPDDR3 devices which comply with earlier versions of the LPDDR3 JEDEC specification) or not
+		 - 0 - tREFBW parameter not used - 1 - tREFBW parameter used*/
+#undef DDRC_RFSHTMG_LPDDR3_TREFBW_EN_DEFVAL 
+#undef DDRC_RFSHTMG_LPDDR3_TREFBW_EN_SHIFT 
+#undef DDRC_RFSHTMG_LPDDR3_TREFBW_EN_MASK 
+#define DDRC_RFSHTMG_LPDDR3_TREFBW_EN_DEFVAL                                       0x0062008C
+#define DDRC_RFSHTMG_LPDDR3_TREFBW_EN_SHIFT                                        15
+#define DDRC_RFSHTMG_LPDDR3_TREFBW_EN_MASK                                         0x00008000U
+
+/*tRFC (min): Minimum time from refresh to refresh or activate. For MEMC_FREQ_RATIO=1 configurations, t_rfc_min should be set t
+		 RoundUp(tRFCmin/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rfc_min should be set to RoundUp(RoundUp(tRFCmin/tCK)/2). In L
+		DDR2/LPDDR3/LPDDR4 mode: - if using all-bank refreshes, the tRFCmin value in the above equations is equal to tRFCab - if usin
+		 per-bank refreshes, the tRFCmin value in the above equations is equal to tRFCpb In DDR4 mode, the tRFCmin value in the above
+		equations is different depending on the refresh mode (fixed 1X,2X,4X) and the device density. The user should program the app
+		opriate value from the spec based on the 'refresh_mode' and the device density that is used. Unit: Clocks.*/
+#undef DDRC_RFSHTMG_T_RFC_MIN_DEFVAL 
+#undef DDRC_RFSHTMG_T_RFC_MIN_SHIFT 
+#undef DDRC_RFSHTMG_T_RFC_MIN_MASK 
+#define DDRC_RFSHTMG_T_RFC_MIN_DEFVAL                                              0x0062008C
+#define DDRC_RFSHTMG_T_RFC_MIN_SHIFT                                               0
+#define DDRC_RFSHTMG_T_RFC_MIN_MASK                                                0x000003FFU
+
+/*Disable ECC scrubs. Valid only when ECCCFG0.ecc_mode = 3'b100 and MEMC_USE_RMW is defined*/
+#undef DDRC_ECCCFG0_DIS_SCRUB_DEFVAL 
+#undef DDRC_ECCCFG0_DIS_SCRUB_SHIFT 
+#undef DDRC_ECCCFG0_DIS_SCRUB_MASK 
+#define DDRC_ECCCFG0_DIS_SCRUB_DEFVAL                                              0x00000000
+#define DDRC_ECCCFG0_DIS_SCRUB_SHIFT                                               4
+#define DDRC_ECCCFG0_DIS_SCRUB_MASK                                                0x00000010U
+
+/*ECC mode indicator - 000 - ECC disabled - 100 - ECC enabled - SEC/DED over 1 beat - all other settings are reserved for futur
+		 use*/
+#undef DDRC_ECCCFG0_ECC_MODE_DEFVAL 
+#undef DDRC_ECCCFG0_ECC_MODE_SHIFT 
+#undef DDRC_ECCCFG0_ECC_MODE_MASK 
+#define DDRC_ECCCFG0_ECC_MODE_DEFVAL                                               0x00000000
+#define DDRC_ECCCFG0_ECC_MODE_SHIFT                                                0
+#define DDRC_ECCCFG0_ECC_MODE_MASK                                                 0x00000007U
+
+/*Selects whether to poison 1 or 2 bits - if 0 -> 2-bit (uncorrectable) data poisoning, if 1 -> 1-bit (correctable) data poison
+		ng, if ECCCFG1.data_poison_en=1*/
+#undef DDRC_ECCCFG1_DATA_POISON_BIT_DEFVAL 
+#undef DDRC_ECCCFG1_DATA_POISON_BIT_SHIFT 
+#undef DDRC_ECCCFG1_DATA_POISON_BIT_MASK 
+#define DDRC_ECCCFG1_DATA_POISON_BIT_DEFVAL                                        0x00000000
+#define DDRC_ECCCFG1_DATA_POISON_BIT_SHIFT                                         1
+#define DDRC_ECCCFG1_DATA_POISON_BIT_MASK                                          0x00000002U
+
+/*Enable ECC data poisoning - introduces ECC errors on writes to address specified by the ECCPOISONADDR0/1 registers*/
+#undef DDRC_ECCCFG1_DATA_POISON_EN_DEFVAL 
+#undef DDRC_ECCCFG1_DATA_POISON_EN_SHIFT 
+#undef DDRC_ECCCFG1_DATA_POISON_EN_MASK 
+#define DDRC_ECCCFG1_DATA_POISON_EN_DEFVAL                                         0x00000000
+#define DDRC_ECCCFG1_DATA_POISON_EN_SHIFT                                          0
+#define DDRC_ECCCFG1_DATA_POISON_EN_MASK                                           0x00000001U
+
+/*The maximum number of DFI PHY clock cycles allowed from the assertion of the dfi_rddata_en signal to the assertion of each of
+		the corresponding bits of the dfi_rddata_valid signal. This corresponds to the DFI timing parameter tphy_rdlat. Refer to PHY 
+		pecification for correct value. This value it only used for detecting read data timeout when DDR4 retry is enabled by CRCPARC
+		L1.crc_parity_retry_enable=1. Maximum supported value: - 1:1 Frequency mode : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_
+		dlat < 'd114 - 1:2 Frequency mode ANDAND DFITMG0.dfi_rddata_use_sdr == 1 : CRCPARCTL1.dfi_t_phy_rdlat < 64 - 1:2 Frequency mo
+		e ANDAND DFITMG0.dfi_rddata_use_sdr == 0 : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_rdlat < 'd114 Unit: DFI Clocks*/
+#undef DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_DEFVAL 
+#undef DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_SHIFT 
+#undef DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_MASK 
+#define DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_DEFVAL                                     0x10000200
+#define DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_SHIFT                                      24
+#define DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_MASK                                       0x3F000000U
+
+/*After a Parity or CRC error is flagged on dfi_alert_n signal, the software has an option to read the mode registers in the DR
+		M before the hardware begins the retry process - 1: Wait for software to read/write the mode registers before hardware begins
+		the retry. After software is done with its operations, it will clear the alert interrupt register bit - 0: Hardware can begin
+		the retry right away after the dfi_alert_n pulse goes away. The value on this register is valid only when retry is enabled (P
+		RCTRL.crc_parity_retry_enable = 1) If this register is set to 1 and if the software doesn't clear the interrupt register afte
+		 handling the parity/CRC error, then the hardware will not begin the retry process and the system will hang. In the case of P
+		rity/CRC error, there are two possibilities when the software doesn't reset MR5[4] to 0. - (i) If 'Persistent parity' mode re
+		ister bit is NOT set: the commands sent during retry and normal operation are executed without parity checking. The value in 
+		he Parity error log register MPR Page 1 is valid. - (ii) If 'Persistent parity' mode register bit is SET: Parity checking is 
+		one for commands sent during retry and normal operation. If multiple errors occur before MR5[4] is cleared, the error log in 
+		PR Page 1 should be treated as 'Don't care'.*/
+#undef DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_DEFVAL 
+#undef DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_SHIFT 
+#undef DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_MASK 
+#define DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_DEFVAL                                   0x10000200
+#define DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_SHIFT                                    9
+#define DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_MASK                                     0x00000200U
+
+/*- 1: Enable command retry mechanism in case of C/A Parity or CRC error - 0: Disable command retry mechanism when C/A Parity o
+		 CRC features are enabled. Note that retry functionality is not supported if burst chop is enabled (MSTR.burstchop = 1) and/o
+		 disable auto-refresh is enabled (RFSHCTL3.dis_auto_refresh = 1)*/
+#undef DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_DEFVAL 
+#undef DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_SHIFT 
+#undef DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_MASK 
+#define DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_DEFVAL                             0x10000200
+#define DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_SHIFT                              8
+#define DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_MASK                               0x00000100U
+
+/*CRC Calculation setting register - 1: CRC includes DM signal - 0: CRC not includes DM signal Present only in designs configur
+		d to support DDR4.*/
+#undef DDRC_CRCPARCTL1_CRC_INC_DM_DEFVAL 
+#undef DDRC_CRCPARCTL1_CRC_INC_DM_SHIFT 
+#undef DDRC_CRCPARCTL1_CRC_INC_DM_MASK 
+#define DDRC_CRCPARCTL1_CRC_INC_DM_DEFVAL                                          0x10000200
+#define DDRC_CRCPARCTL1_CRC_INC_DM_SHIFT                                           7
+#define DDRC_CRCPARCTL1_CRC_INC_DM_MASK                                            0x00000080U
+
+/*CRC enable Register - 1: Enable generation of CRC - 0: Disable generation of CRC The setting of this register should match th
+		 CRC mode register setting in the DRAM.*/
+#undef DDRC_CRCPARCTL1_CRC_ENABLE_DEFVAL 
+#undef DDRC_CRCPARCTL1_CRC_ENABLE_SHIFT 
+#undef DDRC_CRCPARCTL1_CRC_ENABLE_MASK 
+#define DDRC_CRCPARCTL1_CRC_ENABLE_DEFVAL                                          0x10000200
+#define DDRC_CRCPARCTL1_CRC_ENABLE_SHIFT                                           4
+#define DDRC_CRCPARCTL1_CRC_ENABLE_MASK                                            0x00000010U
+
+/*C/A Parity enable register - 1: Enable generation of C/A parity and detection of C/A parity error - 0: Disable generation of 
+		/A parity and disable detection of C/A parity error If RCD's parity error detection or SDRAM's parity detection is enabled, t
+		is register should be 1.*/
+#undef DDRC_CRCPARCTL1_PARITY_ENABLE_DEFVAL 
+#undef DDRC_CRCPARCTL1_PARITY_ENABLE_SHIFT 
+#undef DDRC_CRCPARCTL1_PARITY_ENABLE_MASK 
+#define DDRC_CRCPARCTL1_PARITY_ENABLE_DEFVAL                                       0x10000200
+#define DDRC_CRCPARCTL1_PARITY_ENABLE_SHIFT                                        0
+#define DDRC_CRCPARCTL1_PARITY_ENABLE_MASK                                         0x00000001U
+
+/*Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a parity error occurs. Recommended values
+		 - tPAR_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tPAR_ALERT_PW.MAX/2 and round up to next inte
+		er value. Values of 0, 1 and 2 are illegal. This value must be greater than CRCPARCTL2.t_crc_alert_pw_max.*/
+#undef DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_DEFVAL 
+#undef DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_SHIFT 
+#undef DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_MASK 
+#define DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_DEFVAL                                  0x0030050C
+#define DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_SHIFT                                   16
+#define DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_MASK                                    0x01FF0000U
+
+/*Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a CRC error occurs. Recommended values: -
+		tCRC_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tCRC_ALERT_PW.MAX/2 and round up to next integer
+		value. Values of 0, 1 and 2 are illegal. This value must be less than CRCPARCTL2.t_par_alert_pw_max.*/
+#undef DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_DEFVAL 
+#undef DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_SHIFT 
+#undef DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_MASK 
+#define DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_DEFVAL                                  0x0030050C
+#define DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_SHIFT                                   8
+#define DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_MASK                                    0x00001F00U
+
+/*Indicates the maximum duration in number of DRAM clock cycles for which a command should be held in the Command Retry FIFO be
+		ore it is popped out. Every location in the Command Retry FIFO has an associated down counting timer that will use this regis
+		er as the start value. The down counting starts when a command is loaded into the FIFO. The timer counts down every 4 DRAM cy
+		les. When the counter reaches zero, the entry is popped from the FIFO. All the counters are frozen, if a C/A Parity or CRC er
+		or occurs before the counter reaches zero. The counter is reset to 0, after all the commands in the FIFO are retried. Recomme
+		ded(minimum) values: - Only C/A Parity is enabled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + tPAR_ALERT_ON
+		max + tPAR_UNKNOWN + PHY Alert Latency(DRAM CLK) + board delay) / 4) + 2 - Both C/A Parity and CRC is enabled/ Only CRC is en
+		bled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + WL + 5(BL10)+ tCRC_ALERT.max + PHY Alert Latency(DRAM CLK)
+		+ board delay) / 4) + 2 Note 1: All value (e.g. tPAR_ALERT_ON) should be in terms of DRAM Clock and round up Note 2: Board de
+		ay(Command/Alert_n) should be considered. Note 3: Use the worst case(longer) value for PHY Latencies/Board delay Note 4: The 
+		ecommended values are minimum value to be set. For mode detail, See 'Calculation of FIFO Depth' section. Max value can be set
+		to this register is defined below: - MEMC_BURST_LENGTH == 16 Full bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-
+		 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Half bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_D
+		PTH-4 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-6 Quarter bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CM
+		_FIFO_DEPTH-8 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-12 - MEMC_BURST_LENGTH != 16 Full bus Mode (C
+		C=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-1 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mo
+		e (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Quarte
+		 bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-4 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEP
+		H-6 Values of 0, 1 and 2 are illegal.*/
+#undef DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_DEFVAL 
+#undef DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_SHIFT 
+#undef DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_MASK 
+#define DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_DEFVAL                        0x0030050C
+#define DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_SHIFT                         0
+#define DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_MASK                          0x0000003FU
+
+/*If lower bit is enabled the SDRAM initialization routine is skipped. The upper bit decides what state the controller starts u
+		 in when reset is removed - 00 - SDRAM Intialization routine is run after power-up - 01 - SDRAM Intialization routine is skip
+		ed after power-up. Controller starts up in Normal Mode - 11 - SDRAM Intialization routine is skipped after power-up. Controll
+		r starts up in Self-refresh Mode - 10 - SDRAM Intialization routine is run after power-up. Note: The only 2'b00 is supported 
+		or LPDDR4 in this version of the uMCTL2.*/
+#undef DDRC_INIT0_SKIP_DRAM_INIT_DEFVAL 
+#undef DDRC_INIT0_SKIP_DRAM_INIT_SHIFT 
+#undef DDRC_INIT0_SKIP_DRAM_INIT_MASK 
+#define DDRC_INIT0_SKIP_DRAM_INIT_DEFVAL                                           0x0002004E
+#define DDRC_INIT0_SKIP_DRAM_INIT_SHIFT                                            30
+#define DDRC_INIT0_SKIP_DRAM_INIT_MASK                                             0xC0000000U
+
+/*Cycles to wait after driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clocks. DDR2 typically requires 
+		 400 ns delay, requiring this value to be programmed to 2 at all clock speeds. LPDDR2/LPDDR3 typically requires this to be pr
+		grammed for a delay of 200 us. LPDDR4 typically requires this to be programmed for a delay of 2 us. For configurations with M
+		MC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it up to next integer value.*/
+#undef DDRC_INIT0_POST_CKE_X1024_DEFVAL 
+#undef DDRC_INIT0_POST_CKE_X1024_SHIFT 
+#undef DDRC_INIT0_POST_CKE_X1024_MASK 
+#define DDRC_INIT0_POST_CKE_X1024_DEFVAL                                           0x0002004E
+#define DDRC_INIT0_POST_CKE_X1024_SHIFT                                            16
+#define DDRC_INIT0_POST_CKE_X1024_MASK                                             0x03FF0000U
+
+/*Cycles to wait after reset before driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clock cycles. DDR2 
+		pecifications typically require this to be programmed for a delay of >= 200 us. LPDDR2/LPDDR3: tINIT1 of 100 ns (min) LPDDR4:
+		tINIT3 of 2 ms (min) For configurations with MEMC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it u
+		 to next integer value.*/
+#undef DDRC_INIT0_PRE_CKE_X1024_DEFVAL 
+#undef DDRC_INIT0_PRE_CKE_X1024_SHIFT 
+#undef DDRC_INIT0_PRE_CKE_X1024_MASK 
+#define DDRC_INIT0_PRE_CKE_X1024_DEFVAL                                            0x0002004E
+#define DDRC_INIT0_PRE_CKE_X1024_SHIFT                                             0
+#define DDRC_INIT0_PRE_CKE_X1024_MASK                                              0x00000FFFU
+
+/*Number of cycles to assert SDRAM reset signal during init sequence. This is only present for designs supporting DDR3, DDR4 or
+		LPDDR4 devices. For use with a DDR PHY, this should be set to a minimum of 1*/
+#undef DDRC_INIT1_DRAM_RSTN_X1024_DEFVAL 
+#undef DDRC_INIT1_DRAM_RSTN_X1024_SHIFT 
+#undef DDRC_INIT1_DRAM_RSTN_X1024_MASK 
+#define DDRC_INIT1_DRAM_RSTN_X1024_DEFVAL                                          0x00000000
+#define DDRC_INIT1_DRAM_RSTN_X1024_SHIFT                                           16
+#define DDRC_INIT1_DRAM_RSTN_X1024_MASK                                            0x01FF0000U
+
+/*Cycles to wait after completing the SDRAM initialization sequence before starting the dynamic scheduler. Unit: Counts of a gl
+		bal timer that pulses every 32 clock cycles. There is no known specific requirement for this; it may be set to zero.*/
+#undef DDRC_INIT1_FINAL_WAIT_X32_DEFVAL 
+#undef DDRC_INIT1_FINAL_WAIT_X32_SHIFT 
+#undef DDRC_INIT1_FINAL_WAIT_X32_MASK 
+#define DDRC_INIT1_FINAL_WAIT_X32_DEFVAL                                           0x00000000
+#define DDRC_INIT1_FINAL_WAIT_X32_SHIFT                                            8
+#define DDRC_INIT1_FINAL_WAIT_X32_MASK                                             0x00007F00U
+
+/*Wait period before driving the OCD complete command to SDRAM. Unit: Counts of a global timer that pulses every 32 clock cycle
+		. There is no known specific requirement for this; it may be set to zero.*/
+#undef DDRC_INIT1_PRE_OCD_X32_DEFVAL 
+#undef DDRC_INIT1_PRE_OCD_X32_SHIFT 
+#undef DDRC_INIT1_PRE_OCD_X32_MASK 
+#define DDRC_INIT1_PRE_OCD_X32_DEFVAL                                              0x00000000
+#define DDRC_INIT1_PRE_OCD_X32_SHIFT                                               0
+#define DDRC_INIT1_PRE_OCD_X32_MASK                                                0x0000000FU
+
+/*Idle time after the reset command, tINIT4. Present only in designs configured to support LPDDR2. Unit: 32 clock cycles.*/
+#undef DDRC_INIT2_IDLE_AFTER_RESET_X32_DEFVAL 
+#undef DDRC_INIT2_IDLE_AFTER_RESET_X32_SHIFT 
+#undef DDRC_INIT2_IDLE_AFTER_RESET_X32_MASK 
+#define DDRC_INIT2_IDLE_AFTER_RESET_X32_DEFVAL                                     0x00000D05
+#define DDRC_INIT2_IDLE_AFTER_RESET_X32_SHIFT                                      8
+#define DDRC_INIT2_IDLE_AFTER_RESET_X32_MASK                                       0x0000FF00U
+
+/*Time to wait after the first CKE high, tINIT2. Present only in designs configured to support LPDDR2/LPDDR3. Unit: 1 clock cyc
+		e. LPDDR2/LPDDR3 typically requires 5 x tCK delay.*/
+#undef DDRC_INIT2_MIN_STABLE_CLOCK_X1_DEFVAL 
+#undef DDRC_INIT2_MIN_STABLE_CLOCK_X1_SHIFT 
+#undef DDRC_INIT2_MIN_STABLE_CLOCK_X1_MASK 
+#define DDRC_INIT2_MIN_STABLE_CLOCK_X1_DEFVAL                                      0x00000D05
+#define DDRC_INIT2_MIN_STABLE_CLOCK_X1_SHIFT                                       0
+#define DDRC_INIT2_MIN_STABLE_CLOCK_X1_MASK                                        0x0000000FU
+
+/*DDR2: Value to write to MR register. Bit 8 is for DLL and the setting here is ignored. The uMCTL2 sets this bit appropriately
+		 DDR3/DDR4: Value loaded into MR0 register. mDDR: Value to write to MR register. LPDDR2/LPDDR3/LPDDR4 - Value to write to MR1
+		register*/
+#undef DDRC_INIT3_MR_DEFVAL 
+#undef DDRC_INIT3_MR_SHIFT 
+#undef DDRC_INIT3_MR_MASK 
+#define DDRC_INIT3_MR_DEFVAL                                                       0x00000510
+#define DDRC_INIT3_MR_SHIFT                                                        16
+#define DDRC_INIT3_MR_MASK                                                         0xFFFF0000U
+
+/*DDR2: Value to write to EMR register. Bits 9:7 are for OCD and the setting in this register is ignored. The uMCTL2 sets those
+		bits appropriately. DDR3/DDR4: Value to write to MR1 register Set bit 7 to 0. If PHY-evaluation mode training is enabled, thi
+		 bit is set appropriately by the uMCTL2 during write leveling. mDDR: Value to write to EMR register. LPDDR2/LPDDR3/LPDDR4 - V
+		lue to write to MR2 register*/
+#undef DDRC_INIT3_EMR_DEFVAL 
+#undef DDRC_INIT3_EMR_SHIFT 
+#undef DDRC_INIT3_EMR_MASK 
+#define DDRC_INIT3_EMR_DEFVAL                                                      0x00000510
+#define DDRC_INIT3_EMR_SHIFT                                                       0
+#define DDRC_INIT3_EMR_MASK                                                        0x0000FFFFU
+
+/*DDR2: Value to write to EMR2 register. DDR3/DDR4: Value to write to MR2 register LPDDR2/LPDDR3/LPDDR4: Value to write to MR3 
+		egister mDDR: Unused*/
+#undef DDRC_INIT4_EMR2_DEFVAL 
+#undef DDRC_INIT4_EMR2_SHIFT 
+#undef DDRC_INIT4_EMR2_MASK 
+#define DDRC_INIT4_EMR2_DEFVAL                                                     0x00000000
+#define DDRC_INIT4_EMR2_SHIFT                                                      16
+#define DDRC_INIT4_EMR2_MASK                                                       0xFFFF0000U
+
+/*DDR2: Value to write to EMR3 register. DDR3/DDR4: Value to write to MR3 register mDDR/LPDDR2/LPDDR3: Unused LPDDR4: Value to 
+		rite to MR13 register*/
+#undef DDRC_INIT4_EMR3_DEFVAL 
+#undef DDRC_INIT4_EMR3_SHIFT 
+#undef DDRC_INIT4_EMR3_MASK 
+#define DDRC_INIT4_EMR3_DEFVAL                                                     0x00000000
+#define DDRC_INIT4_EMR3_SHIFT                                                      0
+#define DDRC_INIT4_EMR3_MASK                                                       0x0000FFFFU
+
+/*ZQ initial calibration, tZQINIT. Present only in designs configured to support DDR3 or DDR4 or LPDDR2/LPDDR3. Unit: 32 clock 
+		ycles. DDR3 typically requires 512 clocks. DDR4 requires 1024 clocks. LPDDR2/LPDDR3 requires 1 us.*/
+#undef DDRC_INIT5_DEV_ZQINIT_X32_DEFVAL 
+#undef DDRC_INIT5_DEV_ZQINIT_X32_SHIFT 
+#undef DDRC_INIT5_DEV_ZQINIT_X32_MASK 
+#define DDRC_INIT5_DEV_ZQINIT_X32_DEFVAL                                           0x00100004
+#define DDRC_INIT5_DEV_ZQINIT_X32_SHIFT                                            16
+#define DDRC_INIT5_DEV_ZQINIT_X32_MASK                                             0x00FF0000U
+
+/*Maximum duration of the auto initialization, tINIT5. Present only in designs configured to support LPDDR2/LPDDR3. LPDDR2/LPDD
+		3 typically requires 10 us.*/
+#undef DDRC_INIT5_MAX_AUTO_INIT_X1024_DEFVAL 
+#undef DDRC_INIT5_MAX_AUTO_INIT_X1024_SHIFT 
+#undef DDRC_INIT5_MAX_AUTO_INIT_X1024_MASK 
+#define DDRC_INIT5_MAX_AUTO_INIT_X1024_DEFVAL                                      0x00100004
+#define DDRC_INIT5_MAX_AUTO_INIT_X1024_SHIFT                                       0
+#define DDRC_INIT5_MAX_AUTO_INIT_X1024_MASK                                        0x000003FFU
+
+/*DDR4- Value to be loaded into SDRAM MR4 registers. Used in DDR4 designs only.*/
+#undef DDRC_INIT6_MR4_DEFVAL 
+#undef DDRC_INIT6_MR4_SHIFT 
+#undef DDRC_INIT6_MR4_MASK 
+#define DDRC_INIT6_MR4_DEFVAL                                                      0x00000000
+#define DDRC_INIT6_MR4_SHIFT                                                       16
+#define DDRC_INIT6_MR4_MASK                                                        0xFFFF0000U
+
+/*DDR4- Value to be loaded into SDRAM MR5 registers. Used in DDR4 designs only.*/
+#undef DDRC_INIT6_MR5_DEFVAL 
+#undef DDRC_INIT6_MR5_SHIFT 
+#undef DDRC_INIT6_MR5_MASK 
+#define DDRC_INIT6_MR5_DEFVAL                                                      0x00000000
+#define DDRC_INIT6_MR5_SHIFT                                                       0
+#define DDRC_INIT6_MR5_MASK                                                        0x0000FFFFU
+
+/*DDR4- Value to be loaded into SDRAM MR6 registers. Used in DDR4 designs only.*/
+#undef DDRC_INIT7_MR6_DEFVAL 
+#undef DDRC_INIT7_MR6_SHIFT 
+#undef DDRC_INIT7_MR6_MASK 
+#define DDRC_INIT7_MR6_DEFVAL                                                      
+#define DDRC_INIT7_MR6_SHIFT                                                       16
+#define DDRC_INIT7_MR6_MASK                                                        0xFFFF0000U
+
+/*Disabling Address Mirroring for BG bits. When this is set to 1, BG0 and BG1 are NOT swapped even if Address Mirroring is enab
+		ed. This will be required for DDR4 DIMMs with x16 devices. - 1 - BG0 and BG1 are NOT swapped. - 0 - BG0 and BG1 are swapped i
+		 address mirroring is enabled.*/
+#undef DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_MASK 
+#define DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_DEFVAL                                  0x00000000
+#define DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_SHIFT                                   5
+#define DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_MASK                                    0x00000020U
+
+/*Enable for BG1 bit of MRS command. BG1 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have BG1 are attached and both the CA parity and the Output 
+		nversion are enabled, this must be set to 0, so that the calculation of CA parity will not include BG1 bit. Note: This has no
+		effect on the address of any other memory accesses, or of software-driven mode register accesses. If address mirroring is ena
+		led, this is applied to BG1 of even ranks and BG0 of odd ranks. - 1 - Enabled - 0 - Disabled*/
+#undef DDRC_DIMMCTL_MRS_BG1_EN_DEFVAL 
+#undef DDRC_DIMMCTL_MRS_BG1_EN_SHIFT 
+#undef DDRC_DIMMCTL_MRS_BG1_EN_MASK 
+#define DDRC_DIMMCTL_MRS_BG1_EN_DEFVAL                                             0x00000000
+#define DDRC_DIMMCTL_MRS_BG1_EN_SHIFT                                              4
+#define DDRC_DIMMCTL_MRS_BG1_EN_MASK                                               0x00000010U
+
+/*Enable for A17 bit of MRS command. A17 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
+		 be programmed to 0 during MRS. In case where DRAMs which do not have A17 are attached and the Output Inversion are enabled, 
+		his must be set to 0, so that the calculation of CA parity will not include A17 bit. Note: This has no effect on the address 
+		f any other memory accesses, or of software-driven mode register accesses. - 1 - Enabled - 0 - Disabled*/
+#undef DDRC_DIMMCTL_MRS_A17_EN_DEFVAL 
+#undef DDRC_DIMMCTL_MRS_A17_EN_SHIFT 
+#undef DDRC_DIMMCTL_MRS_A17_EN_MASK 
+#define DDRC_DIMMCTL_MRS_A17_EN_DEFVAL                                             0x00000000
+#define DDRC_DIMMCTL_MRS_A17_EN_SHIFT                                              3
+#define DDRC_DIMMCTL_MRS_A17_EN_MASK                                               0x00000008U
+
+/*Output Inversion Enable (for DDR4 RDIMM implementations only). DDR4 RDIMM implements the Output Inversion feature by default,
+		which means that the following address, bank address and bank group bits of B-side DRAMs are inverted: A3-A9, A11, A13, A17, 
+		A0-BA1, BG0-BG1. Setting this bit ensures that, for mode register accesses generated by the uMCTL2 during the automatic initi
+		lization routine and enabling of a particular DDR4 feature, separate A-side and B-side mode register accesses are generated. 
+		or B-side mode register accesses, these bits are inverted within the uMCTL2 to compensate for this RDIMM inversion. Note: Thi
+		 has no effect on the address of any other memory accesses, or of software-driven mode register accesses. - 1 - Implement out
+		ut inversion for B-side DRAMs. - 0 - Do not implement output inversion for B-side DRAMs.*/
+#undef DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_MASK 
+#define DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_DEFVAL                                     0x00000000
+#define DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_SHIFT                                      2
+#define DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_MASK                                       0x00000004U
+
+/*Address Mirroring Enable (for multi-rank UDIMM implementations and multi-rank DDR4 RDIMM implementations). Some UDIMMs and DD
+		4 RDIMMs implement address mirroring for odd ranks, which means that the following address, bank address and bank group bits 
+		re swapped: (A3, A4), (A5, A6), (A7, A8), (BA0, BA1) and also (A11, A13), (BG0, BG1) for the DDR4. Setting this bit ensures t
+		at, for mode register accesses during the automatic initialization routine, these bits are swapped within the uMCTL2 to compe
+		sate for this UDIMM/RDIMM swapping. In addition to the automatic initialization routine, in case of DDR4 UDIMM/RDIMM, they ar
+		 swapped during the automatic MRS access to enable/disable of a particular DDR4 feature. Note: This has no effect on the addr
+		ss of any other memory accesses, or of software-driven mode register accesses. This is not supported for mDDR, LPDDR2, LPDDR3
+		or LPDDR4 SDRAMs. Note: In case of x16 DDR4 DIMMs, BG1 output of MRS for the odd ranks is same as BG0 because BG1 is invalid,
+		hence dimm_dis_bg_mirroring register must be set to 1. - 1 - For odd ranks, implement address mirroring for MRS commands to d
+		ring initialization and for any automatic DDR4 MRS commands (to be used if UDIMM/RDIMM implements address mirroring) - 0 - Do
+		not implement address mirroring*/
+#undef DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_MASK 
+#define DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_DEFVAL                                      0x00000000
+#define DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_SHIFT                                       1
+#define DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_MASK                                        0x00000002U
+
+/*Staggering enable for multi-rank accesses (for multi-rank UDIMM and RDIMM implementations only). This is not supported for mD
+		R, LPDDR2, LPDDR3 or LPDDR4 SDRAMs. Note: Even if this bit is set it does not take care of software driven MR commands (via M
+		CTRL0/MRCTRL1), where software is responsible to send them to seperate ranks as appropriate. - 1 - (DDR4) Send MRS commands t
+		 each ranks seperately - 1 - (non-DDR4) Send all commands to even and odd ranks seperately - 0 - Do not stagger accesses*/
+#undef DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_DEFVAL 
+#undef DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_SHIFT 
+#undef DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_MASK 
+#define DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_DEFVAL                                     0x00000000
+#define DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_SHIFT                                      0
+#define DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_MASK                                       0x00000001U
+
+/*Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e writes to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should c
+		nsider both PHY requirement and ODT requirement. - PHY requirement: tphy_wrcsgap + 1 (see PHY databook for value of tphy_wrcs
+		ap) If CRC feature is enabled, should be increased by 1. If write preamble is set to 2tCK(DDR4/LPDDR4 only), should be increa
+		ed by 1. If write postamble is set to 1.5tCK(LPDDR4 only), should be increased by 1. - ODT requirement: The value programmed 
+		n this register takes care of the ODT switch off timing requirement when switching ranks during writes. For LPDDR4, the requi
+		ement is ODTLoff - ODTLon - BL/2 + 1 For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY requirement
+		or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and round it u
+		 to the next integer.*/
+#undef DDRC_RANKCTL_DIFF_RANK_WR_GAP_DEFVAL 
+#undef DDRC_RANKCTL_DIFF_RANK_WR_GAP_SHIFT 
+#undef DDRC_RANKCTL_DIFF_RANK_WR_GAP_MASK 
+#define DDRC_RANKCTL_DIFF_RANK_WR_GAP_DEFVAL                                       0x0000066F
+#define DDRC_RANKCTL_DIFF_RANK_WR_GAP_SHIFT                                        8
+#define DDRC_RANKCTL_DIFF_RANK_WR_GAP_MASK                                         0x00000F00U
+
+/*Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
+		e reads to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should co
+		sider both PHY requirement and ODT requirement. - PHY requirement: tphy_rdcsgap + 1 (see PHY databook for value of tphy_rdcsg
+		p) If read preamble is set to 2tCK(DDR4/LPDDR4 only), should be increased by 1. If read postamble is set to 1.5tCK(LPDDR4 onl
+		), should be increased by 1. - ODT requirement: The value programmed in this register takes care of the ODT switch off timing
+		requirement when switching ranks during reads. For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY r
+		quirement or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and 
+		ound it up to the next integer.*/
+#undef DDRC_RANKCTL_DIFF_RANK_RD_GAP_DEFVAL 
+#undef DDRC_RANKCTL_DIFF_RANK_RD_GAP_SHIFT 
+#undef DDRC_RANKCTL_DIFF_RANK_RD_GAP_MASK 
+#define DDRC_RANKCTL_DIFF_RANK_RD_GAP_DEFVAL                                       0x0000066F
+#define DDRC_RANKCTL_DIFF_RANK_RD_GAP_SHIFT                                        4
+#define DDRC_RANKCTL_DIFF_RANK_RD_GAP_MASK                                         0x000000F0U
+
+/*Only present for multi-rank configurations. Background: Reads to the same rank can be performed back-to-back. Reads to differ
+		nt ranks require additional gap dictated by the register RANKCTL.diff_rank_rd_gap. This is to avoid possible data bus content
+		on as well as to give PHY enough time to switch the delay when changing ranks. The uMCTL2 arbitrates for bus access on a cycl
+		-by-cycle basis; therefore after a read is scheduled, there are few clock cycles (determined by the value on RANKCTL.diff_ran
+		_rd_gap register) in which only reads from the same rank are eligible to be scheduled. This prevents reads from other ranks f
+		om having fair access to the data bus. This parameter represents the maximum number of reads that can be scheduled consecutiv
+		ly to the same rank. After this number is reached, a delay equal to RANKCTL.diff_rank_rd_gap is inserted by the scheduler to 
+		llow all ranks a fair opportunity to be scheduled. Higher numbers increase bandwidth utilization, lower numbers increase fair
+		ess. This feature can be DISABLED by setting this register to 0. When set to 0, the Controller will stay on the same rank as 
+		ong as commands are available for it. Minimum programmable value is 0 (feature disabled) and maximum programmable value is 0x
+		. FOR PERFORMANCE ONLY.*/
+#undef DDRC_RANKCTL_MAX_RANK_RD_DEFVAL 
+#undef DDRC_RANKCTL_MAX_RANK_RD_SHIFT 
+#undef DDRC_RANKCTL_MAX_RANK_RD_MASK 
+#define DDRC_RANKCTL_MAX_RANK_RD_DEFVAL                                            0x0000066F
+#define DDRC_RANKCTL_MAX_RANK_RD_SHIFT                                             0
+#define DDRC_RANKCTL_MAX_RANK_RD_MASK                                              0x0000000FU
+
+/*Minimum time between write and precharge to same bank. Unit: Clocks Specifications: WL + BL/2 + tWR = approximately 8 cycles 
+		 15 ns = 14 clocks @400MHz and less for lower frequencies where: - WL = write latency - BL = burst length. This must match th
+		 value programmed in the BL bit of the mode register to the SDRAM. BST (burst terminate) is not supported at present. - tWR =
+		Write recovery time. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 for this 
+		arameter. For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For configurations
+		with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer value.*/
+#undef DDRC_DRAMTMG0_WR2PRE_DEFVAL 
+#undef DDRC_DRAMTMG0_WR2PRE_SHIFT 
+#undef DDRC_DRAMTMG0_WR2PRE_MASK 
+#define DDRC_DRAMTMG0_WR2PRE_DEFVAL                                                0x0F101B0F
+#define DDRC_DRAMTMG0_WR2PRE_SHIFT                                                 24
+#define DDRC_DRAMTMG0_WR2PRE_MASK                                                  0x7F000000U
+
+/*tFAW Valid only when 8 or more banks(or banks x bank groups) are present. In 8-bank design, at most 4 banks must be activated
+		in a rolling window of tFAW cycles. For configurations with MEMC_FREQ_RATIO=2, program this to (tFAW/2) and round up to next 
+		nteger value. In a 4-bank design, set this register to 0x1 independent of the MEMC_FREQ_RATIO configuration. Unit: Clocks*/
+#undef DDRC_DRAMTMG0_T_FAW_DEFVAL 
+#undef DDRC_DRAMTMG0_T_FAW_SHIFT 
+#undef DDRC_DRAMTMG0_T_FAW_MASK 
+#define DDRC_DRAMTMG0_T_FAW_DEFVAL                                                 0x0F101B0F
+#define DDRC_DRAMTMG0_T_FAW_SHIFT                                                  16
+#define DDRC_DRAMTMG0_T_FAW_MASK                                                   0x003F0000U
+
+/*tRAS(max): Maximum time between activate and precharge to same bank. This is the maximum time that a page can be kept open Mi
+		imum value of this register is 1. Zero is invalid. For configurations with MEMC_FREQ_RATIO=2, program this to (tRAS(max)-1)/2
+		 No rounding up. Unit: Multiples of 1024 clocks.*/
+#undef DDRC_DRAMTMG0_T_RAS_MAX_DEFVAL 
+#undef DDRC_DRAMTMG0_T_RAS_MAX_SHIFT 
+#undef DDRC_DRAMTMG0_T_RAS_MAX_MASK 
+#define DDRC_DRAMTMG0_T_RAS_MAX_DEFVAL                                             0x0F101B0F
+#define DDRC_DRAMTMG0_T_RAS_MAX_SHIFT                                              8
+#define DDRC_DRAMTMG0_T_RAS_MAX_MASK                                               0x00007F00U
+
+/*tRAS(min): Minimum time between activate and precharge to the same bank. For configurations with MEMC_FREQ_RATIO=2, 1T mode, 
+		rogram this to tRAS(min)/2. No rounding up. For configurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, program this t
+		 (tRAS(min)/2) and round it up to the next integer value. Unit: Clocks*/
+#undef DDRC_DRAMTMG0_T_RAS_MIN_DEFVAL 
+#undef DDRC_DRAMTMG0_T_RAS_MIN_SHIFT 
+#undef DDRC_DRAMTMG0_T_RAS_MIN_MASK 
+#define DDRC_DRAMTMG0_T_RAS_MIN_DEFVAL                                             0x0F101B0F
+#define DDRC_DRAMTMG0_T_RAS_MIN_SHIFT                                              0
+#define DDRC_DRAMTMG0_T_RAS_MIN_MASK                                               0x0000003FU
+
+/*tXP: Minimum time after power-down exit to any operation. For DDR3, this should be programmed to tXPDLL if slow powerdown exi
+		 is selected in MR0[12]. If C/A parity for DDR4 is used, set to (tXP+PL) instead. For configurations with MEMC_FREQ_RATIO=2, 
+		rogram this to (tXP/2) and round it up to the next integer value. Units: Clocks*/
+#undef DDRC_DRAMTMG1_T_XP_DEFVAL 
+#undef DDRC_DRAMTMG1_T_XP_SHIFT 
+#undef DDRC_DRAMTMG1_T_XP_MASK 
+#define DDRC_DRAMTMG1_T_XP_DEFVAL                                                  0x00080414
+#define DDRC_DRAMTMG1_T_XP_SHIFT                                                   16
+#define DDRC_DRAMTMG1_T_XP_MASK                                                    0x001F0000U
+
+/*tRTP: Minimum time from read to precharge of same bank. - DDR2: tAL + BL/2 + max(tRTP, 2) - 2 - DDR3: tAL + max (tRTP, 4) - D
+		R4: Max of following two equations: tAL + max (tRTP, 4) or, RL + BL/2 - tRP. - mDDR: BL/2 - LPDDR2: Depends on if it's LPDDR2
+		S2 or LPDDR2-S4: LPDDR2-S2: BL/2 + tRTP - 1. LPDDR2-S4: BL/2 + max(tRTP,2) - 2. - LPDDR3: BL/2 + max(tRTP,4) - 4 - LPDDR4: BL
+		2 + max(tRTP,8) - 8 For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For conf
+		gurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer val
+		e. Unit: Clocks.*/
+#undef DDRC_DRAMTMG1_RD2PRE_DEFVAL 
+#undef DDRC_DRAMTMG1_RD2PRE_SHIFT 
+#undef DDRC_DRAMTMG1_RD2PRE_MASK 
+#define DDRC_DRAMTMG1_RD2PRE_DEFVAL                                                0x00080414
+#define DDRC_DRAMTMG1_RD2PRE_SHIFT                                                 8
+#define DDRC_DRAMTMG1_RD2PRE_MASK                                                  0x00001F00U
+
+/*tRC: Minimum time between activates to same bank. For configurations with MEMC_FREQ_RATIO=2, program this to (tRC/2) and roun
+		 up to next integer value. Unit: Clocks.*/
+#undef DDRC_DRAMTMG1_T_RC_DEFVAL 
+#undef DDRC_DRAMTMG1_T_RC_SHIFT 
+#undef DDRC_DRAMTMG1_T_RC_MASK 
+#define DDRC_DRAMTMG1_T_RC_DEFVAL                                                  0x00080414
+#define DDRC_DRAMTMG1_T_RC_SHIFT                                                   0
+#define DDRC_DRAMTMG1_T_RC_MASK                                                    0x0000007FU
+
+/*Set to WL Time from write command to write data on SDRAM interface. This must be set to WL. For mDDR, it should normally be s
+		t to 1. Note that, depending on the PHY, if using RDIMM, it may be necessary to use a value of WL + 1 to compensate for the e
+		tra cycle of latency through the RDIMM For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above
+		equation by 2, and round it up to next integer. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAININ
+		 is set), as the DFI read and write latencies defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks*/
+#undef DDRC_DRAMTMG2_WRITE_LATENCY_DEFVAL 
+#undef DDRC_DRAMTMG2_WRITE_LATENCY_SHIFT 
+#undef DDRC_DRAMTMG2_WRITE_LATENCY_MASK 
+#define DDRC_DRAMTMG2_WRITE_LATENCY_DEFVAL                                         0x0305060D
+#define DDRC_DRAMTMG2_WRITE_LATENCY_SHIFT                                          24
+#define DDRC_DRAMTMG2_WRITE_LATENCY_MASK                                           0x3F000000U
+
+/*Set to RL Time from read command to read data on SDRAM interface. This must be set to RL. Note that, depending on the PHY, if
+		using RDIMM, it mat be necessary to use a value of RL + 1 to compensate for the extra cycle of latency through the RDIMM For 
+		onfigurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next inte
+		er. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAINING is set), as the DFI read and write latenci
+		s defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks*/
+#undef DDRC_DRAMTMG2_READ_LATENCY_DEFVAL 
+#undef DDRC_DRAMTMG2_READ_LATENCY_SHIFT 
+#undef DDRC_DRAMTMG2_READ_LATENCY_MASK 
+#define DDRC_DRAMTMG2_READ_LATENCY_DEFVAL                                          0x0305060D
+#define DDRC_DRAMTMG2_READ_LATENCY_SHIFT                                           16
+#define DDRC_DRAMTMG2_READ_LATENCY_MASK                                            0x003F0000U
+
+/*DDR2/3/mDDR: RL + BL/2 + 2 - WL DDR4: RL + BL/2 + 1 + WR_PREAMBLE - WL LPDDR2/LPDDR3: RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL 
+		PDDR4(DQ ODT is Disabled): RL + BL/2 + RU(tDQSCKmax/tCK) + WR_PREAMBLE + RD_POSTAMBLE - WL LPDDR4(DQ ODT is Enabled) : RL + B
+		/2 + RU(tDQSCKmax/tCK) + RD_POSTAMBLE - ODTLon - RU(tODTon(min)/tCK) Minimum time from read command to write command. Include
+		time for bus turnaround and all per-bank, per-rank, and global constraints. Unit: Clocks. Where: - WL = write latency - BL = 
+		urst length. This must match the value programmed in the BL bit of the mode register to the SDRAM - RL = read latency = CAS l
+		tency - WR_PREAMBLE = write preamble. This is unique to DDR4 and LPDDR4. - RD_POSTAMBLE = read postamble. This is unique to L
+		DDR4. For LPDDR2/LPDDR3/LPDDR4, if derating is enabled (DERATEEN.derate_enable=1), derated tDQSCKmax should be used. For conf
+		gurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.*/
+#undef DDRC_DRAMTMG2_RD2WR_DEFVAL 
+#undef DDRC_DRAMTMG2_RD2WR_SHIFT 
+#undef DDRC_DRAMTMG2_RD2WR_MASK 
+#define DDRC_DRAMTMG2_RD2WR_DEFVAL                                                 0x0305060D
+#define DDRC_DRAMTMG2_RD2WR_SHIFT                                                  8
+#define DDRC_DRAMTMG2_RD2WR_MASK                                                   0x00003F00U
+
+/*DDR4: CWL + PL + BL/2 + tWTR_L Others: CWL + BL/2 + tWTR In DDR4, minimum time from write command to read command for same ba
+		k group. In others, minimum time from write command to read command. Includes time for bus turnaround, recovery times, and al
+		 per-bank, per-rank, and global constraints. Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burs
+		 length. This must match the value programmed in the BL bit of the mode register to the SDRAM - tWTR_L = internal write to re
+		d command delay for same bank group. This comes directly from the SDRAM specification. - tWTR = internal write to read comman
+		 delay. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 operation. For configu
+		ations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.*/
+#undef DDRC_DRAMTMG2_WR2RD_DEFVAL 
+#undef DDRC_DRAMTMG2_WR2RD_SHIFT 
+#undef DDRC_DRAMTMG2_WR2RD_MASK 
+#define DDRC_DRAMTMG2_WR2RD_DEFVAL                                                 0x0305060D
+#define DDRC_DRAMTMG2_WR2RD_SHIFT                                                  0
+#define DDRC_DRAMTMG2_WR2RD_MASK                                                   0x0000003FU
+
+/*Time to wait after a mode register write or read (MRW or MRR). Present only in designs configured to support LPDDR2, LPDDR3 o
+		 LPDDR4. LPDDR2 typically requires value of 5. LPDDR3 typically requires value of 10. LPDDR4: Set this to the larger of tMRW 
+		nd tMRWCKEL. For LPDDR2, this register is used for the time from a MRW/MRR to all other commands. For LDPDR3, this register i
+		 used for the time from a MRW/MRR to a MRW/MRR.*/
+#undef DDRC_DRAMTMG3_T_MRW_DEFVAL 
+#undef DDRC_DRAMTMG3_T_MRW_SHIFT 
+#undef DDRC_DRAMTMG3_T_MRW_MASK 
+#define DDRC_DRAMTMG3_T_MRW_DEFVAL                                                 0x0050400C
+#define DDRC_DRAMTMG3_T_MRW_SHIFT                                                  20
+#define DDRC_DRAMTMG3_T_MRW_MASK                                                   0x3FF00000U
+
+/*tMRD: Cycles to wait after a mode register write or read. Depending on the connected SDRAM, tMRD represents: DDR2/mDDR: Time 
+		rom MRS to any command DDR3/4: Time from MRS to MRS command LPDDR2: not used LPDDR3/4: Time from MRS to non-MRS command For c
+		nfigurations with MEMC_FREQ_RATIO=2, program this to (tMRD/2) and round it up to the next integer value. If C/A parity for DD
+		4 is used, set to tMRD_PAR(tMOD+PL) instead.*/
+#undef DDRC_DRAMTMG3_T_MRD_DEFVAL 
+#undef DDRC_DRAMTMG3_T_MRD_SHIFT 
+#undef DDRC_DRAMTMG3_T_MRD_MASK 
+#define DDRC_DRAMTMG3_T_MRD_DEFVAL                                                 0x0050400C
+#define DDRC_DRAMTMG3_T_MRD_SHIFT                                                  12
+#define DDRC_DRAMTMG3_T_MRD_MASK                                                   0x0003F000U
+
+/*tMOD: Parameter used only in DDR3 and DDR4. Cycles between load mode command and following non-load mode command. If C/A pari
+		y for DDR4 is used, set to tMOD_PAR(tMOD+PL) instead. Set to tMOD if MEMC_FREQ_RATIO=1, or tMOD/2 (rounded up to next integer
+		 if MEMC_FREQ_RATIO=2. Note that if using RDIMM, depending on the PHY, it may be necessary to use a value of tMOD + 1 or (tMO
+		 + 1)/2 to compensate for the extra cycle of latency applied to mode register writes by the RDIMM chip.*/
+#undef DDRC_DRAMTMG3_T_MOD_DEFVAL 
+#undef DDRC_DRAMTMG3_T_MOD_SHIFT 
+#undef DDRC_DRAMTMG3_T_MOD_MASK 
+#define DDRC_DRAMTMG3_T_MOD_DEFVAL                                                 0x0050400C
+#define DDRC_DRAMTMG3_T_MOD_SHIFT                                                  0
+#define DDRC_DRAMTMG3_T_MOD_MASK                                                   0x000003FFU
+
+/*tRCD - tAL: Minimum time from activate to read or write command to same bank. For configurations with MEMC_FREQ_RATIO=2, prog
+		am this to ((tRCD - tAL)/2) and round it up to the next integer value. Minimum value allowed for this register is 1, which im
+		lies minimum (tRCD - tAL) value to be 2 in configurations with MEMC_FREQ_RATIO=2. Unit: Clocks.*/
+#undef DDRC_DRAMTMG4_T_RCD_DEFVAL 
+#undef DDRC_DRAMTMG4_T_RCD_SHIFT 
+#undef DDRC_DRAMTMG4_T_RCD_MASK 
+#define DDRC_DRAMTMG4_T_RCD_DEFVAL                                                 0x05040405
+#define DDRC_DRAMTMG4_T_RCD_SHIFT                                                  24
+#define DDRC_DRAMTMG4_T_RCD_MASK                                                   0x1F000000U
+
+/*DDR4: tCCD_L: This is the minimum time between two reads or two writes for same bank group. Others: tCCD: This is the minimum
+		time between two reads or two writes. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_L/2 or tCCD/2) and rou
+		d it up to the next integer value. Unit: clocks.*/
+#undef DDRC_DRAMTMG4_T_CCD_DEFVAL 
+#undef DDRC_DRAMTMG4_T_CCD_SHIFT 
+#undef DDRC_DRAMTMG4_T_CCD_MASK 
+#define DDRC_DRAMTMG4_T_CCD_DEFVAL                                                 0x05040405
+#define DDRC_DRAMTMG4_T_CCD_SHIFT                                                  16
+#define DDRC_DRAMTMG4_T_CCD_MASK                                                   0x000F0000U
+
+/*DDR4: tRRD_L: Minimum time between activates from bank 'a' to bank 'b' for same bank group. Others: tRRD: Minimum time betwee
+		 activates from bank 'a' to bank 'b'For configurations with MEMC_FREQ_RATIO=2, program this to (tRRD_L/2 or tRRD/2) and round
+		it up to the next integer value. Unit: Clocks.*/
+#undef DDRC_DRAMTMG4_T_RRD_DEFVAL 
+#undef DDRC_DRAMTMG4_T_RRD_SHIFT 
+#undef DDRC_DRAMTMG4_T_RRD_MASK 
+#define DDRC_DRAMTMG4_T_RRD_DEFVAL                                                 0x05040405
+#define DDRC_DRAMTMG4_T_RRD_SHIFT                                                  8
+#define DDRC_DRAMTMG4_T_RRD_MASK                                                   0x00000F00U
+
+/*tRP: Minimum time from precharge to activate of same bank. For MEMC_FREQ_RATIO=1 configurations, t_rp should be set to RoundU
+		(tRP/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rp should be set to RoundDown(RoundUp(tRP/tCK)/2) + 1. For MEMC_FREQ_RATIO
+		2 configurations in LPDDR4, t_rp should be set to RoundUp(RoundUp(tRP/tCK)/2). Unit: Clocks.*/
+#undef DDRC_DRAMTMG4_T_RP_DEFVAL 
+#undef DDRC_DRAMTMG4_T_RP_SHIFT 
+#undef DDRC_DRAMTMG4_T_RP_MASK 
+#define DDRC_DRAMTMG4_T_RP_DEFVAL                                                  0x05040405
+#define DDRC_DRAMTMG4_T_RP_SHIFT                                                   0
+#define DDRC_DRAMTMG4_T_RP_MASK                                                    0x0000001FU
+
+/*This is the time before Self Refresh Exit that CK is maintained as a valid clock before issuing SRX. Specifies the clock stab
+		e time before SRX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEH - DDR2: 1 - DDR3: tCKSRX - DDR4:
+		tCKSRX For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next in
+		eger.*/
+#undef DDRC_DRAMTMG5_T_CKSRX_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKSRX_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKSRX_MASK 
+#define DDRC_DRAMTMG5_T_CKSRX_DEFVAL                                               0x05050403
+#define DDRC_DRAMTMG5_T_CKSRX_SHIFT                                                24
+#define DDRC_DRAMTMG5_T_CKSRX_MASK                                                 0x0F000000U
+
+/*This is the time after Self Refresh Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay afte
+		 SRE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL - DDR2: 1 - DDR3: max (10 ns, 5 tCK) - DDR4: 
+		ax (10 ns, 5 tCK) For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up
+		to next integer.*/
+#undef DDRC_DRAMTMG5_T_CKSRE_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKSRE_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKSRE_MASK 
+#define DDRC_DRAMTMG5_T_CKSRE_DEFVAL                                               0x05050403
+#define DDRC_DRAMTMG5_T_CKSRE_SHIFT                                                16
+#define DDRC_DRAMTMG5_T_CKSRE_MASK                                                 0x000F0000U
+
+/*Minimum CKE low width for Self refresh or Self refresh power down entry to exit timing in memory clock cycles. Recommended se
+		tings: - mDDR: tRFC - LPDDR2: tCKESR - LPDDR3: tCKESR - LPDDR4: max(tCKELPD, tSR) - DDR2: tCKE - DDR3: tCKE + 1 - DDR4: tCKE 
+		 1 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next intege
+		.*/
+#undef DDRC_DRAMTMG5_T_CKESR_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKESR_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKESR_MASK 
+#define DDRC_DRAMTMG5_T_CKESR_DEFVAL                                               0x05050403
+#define DDRC_DRAMTMG5_T_CKESR_SHIFT                                                8
+#define DDRC_DRAMTMG5_T_CKESR_MASK                                                 0x00003F00U
+
+/*Minimum number of cycles of CKE HIGH/LOW during power-down and self refresh. - LPDDR2/LPDDR3 mode: Set this to the larger of 
+		CKE or tCKESR - LPDDR4 mode: Set this to the larger of tCKE, tCKELPD or tSR. - Non-LPDDR2/non-LPDDR3/non-LPDDR4 designs: Set 
+		his to tCKE value. For configurations with MEMC_FREQ_RATIO=2, program this to (value described above)/2 and round it up to th
+		 next integer value. Unit: Clocks.*/
+#undef DDRC_DRAMTMG5_T_CKE_DEFVAL 
+#undef DDRC_DRAMTMG5_T_CKE_SHIFT 
+#undef DDRC_DRAMTMG5_T_CKE_MASK 
+#define DDRC_DRAMTMG5_T_CKE_DEFVAL                                                 0x05050403
+#define DDRC_DRAMTMG5_T_CKE_SHIFT                                                  0
+#define DDRC_DRAMTMG5_T_CKE_MASK                                                   0x0000001FU
+
+/*This is the time after Deep Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after 
+		PDE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, program this to recom
+		ended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3
+		devices.*/
+#undef DDRC_DRAMTMG6_T_CKDPDE_DEFVAL 
+#undef DDRC_DRAMTMG6_T_CKDPDE_SHIFT 
+#undef DDRC_DRAMTMG6_T_CKDPDE_MASK 
+#define DDRC_DRAMTMG6_T_CKDPDE_DEFVAL                                              0x02020005
+#define DDRC_DRAMTMG6_T_CKDPDE_SHIFT                                               24
+#define DDRC_DRAMTMG6_T_CKDPDE_MASK                                                0x0F000000U
+
+/*This is the time before Deep Power Down Exit that CK is maintained as a valid clock before issuing DPDX. Specifies the clock 
+		table time before DPDX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, pr
+		gram this to recommended value divided by two and round it up to next integer. This is only present for designs supporting mD
+		R or LPDDR2 devices.*/
+#undef DDRC_DRAMTMG6_T_CKDPDX_DEFVAL 
+#undef DDRC_DRAMTMG6_T_CKDPDX_SHIFT 
+#undef DDRC_DRAMTMG6_T_CKDPDX_MASK 
+#define DDRC_DRAMTMG6_T_CKDPDX_DEFVAL                                              0x02020005
+#define DDRC_DRAMTMG6_T_CKDPDX_SHIFT                                               16
+#define DDRC_DRAMTMG6_T_CKDPDX_MASK                                                0x000F0000U
+
+/*This is the time before Clock Stop Exit that CK is maintained as a valid clock before issuing Clock Stop Exit. Specifies the 
+		lock stable time before next command after Clock Stop Exit. Recommended settings: - mDDR: 1 - LPDDR2: tXP + 2 - LPDDR3: tXP +
+		2 - LPDDR4: tXP + 2 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it 
+		p to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_DRAMTMG6_T_CKCSX_DEFVAL 
+#undef DDRC_DRAMTMG6_T_CKCSX_SHIFT 
+#undef DDRC_DRAMTMG6_T_CKCSX_MASK 
+#define DDRC_DRAMTMG6_T_CKCSX_DEFVAL                                               0x02020005
+#define DDRC_DRAMTMG6_T_CKCSX_SHIFT                                                0
+#define DDRC_DRAMTMG6_T_CKCSX_MASK                                                 0x0000000FU
+
+/*This is the time after Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after PDE. 
+		ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t
+		is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L
+		DDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_DRAMTMG7_T_CKPDE_DEFVAL 
+#undef DDRC_DRAMTMG7_T_CKPDE_SHIFT 
+#undef DDRC_DRAMTMG7_T_CKPDE_MASK 
+#define DDRC_DRAMTMG7_T_CKPDE_DEFVAL                                               0x00000202
+#define DDRC_DRAMTMG7_T_CKPDE_SHIFT                                                8
+#define DDRC_DRAMTMG7_T_CKPDE_MASK                                                 0x00000F00U
+
+/*This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable
+		time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO=
+		, program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti
+		g mDDR or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_DRAMTMG7_T_CKPDX_DEFVAL 
+#undef DDRC_DRAMTMG7_T_CKPDX_SHIFT 
+#undef DDRC_DRAMTMG7_T_CKPDX_MASK 
+#define DDRC_DRAMTMG7_T_CKPDX_DEFVAL                                               0x00000202
+#define DDRC_DRAMTMG7_T_CKPDX_SHIFT                                                0
+#define DDRC_DRAMTMG7_T_CKPDX_MASK                                                 0x0000000FU
+
+/*tXS_FAST: Exit Self Refresh to ZQCL, ZQCS and MRS (only CL, WR, RTP and Geardown mode). For configurations with MEMC_FREQ_RAT
+		O=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Thi
+		 is applicable to only ZQCL/ZQCS commands. Note: Ensure this is less than or equal to t_xs_x32.*/
+#undef DDRC_DRAMTMG8_T_XS_FAST_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_FAST_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_FAST_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_FAST_X32_DEFVAL                                         0x03034405
+#define DDRC_DRAMTMG8_T_XS_FAST_X32_SHIFT                                          24
+#define DDRC_DRAMTMG8_T_XS_FAST_X32_MASK                                           0x7F000000U
+
+/*tXS_ABORT: Exit Self Refresh to commands not requiring a locked DLL in Self Refresh Abort. For configurations with MEMC_FREQ_
+		ATIO=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: 
+		nsure this is less than or equal to t_xs_x32.*/
+#undef DDRC_DRAMTMG8_T_XS_ABORT_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_ABORT_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_ABORT_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_ABORT_X32_DEFVAL                                        0x03034405
+#define DDRC_DRAMTMG8_T_XS_ABORT_X32_SHIFT                                         16
+#define DDRC_DRAMTMG8_T_XS_ABORT_X32_MASK                                          0x007F0000U
+
+/*tXSDLL: Exit Self Refresh to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the 
+		bove value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and 
+		DR4 SDRAMs.*/
+#undef DDRC_DRAMTMG8_T_XS_DLL_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_DLL_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_DLL_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_DLL_X32_DEFVAL                                          0x03034405
+#define DDRC_DRAMTMG8_T_XS_DLL_X32_SHIFT                                           8
+#define DDRC_DRAMTMG8_T_XS_DLL_X32_MASK                                            0x00007F00U
+
+/*tXS: Exit Self Refresh to commands not requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the
+		above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and
+		DDR4 SDRAMs.*/
+#undef DDRC_DRAMTMG8_T_XS_X32_DEFVAL 
+#undef DDRC_DRAMTMG8_T_XS_X32_SHIFT 
+#undef DDRC_DRAMTMG8_T_XS_X32_MASK 
+#define DDRC_DRAMTMG8_T_XS_X32_DEFVAL                                              0x03034405
+#define DDRC_DRAMTMG8_T_XS_X32_SHIFT                                               0
+#define DDRC_DRAMTMG8_T_XS_X32_MASK                                                0x0000007FU
+
+/*DDR4 Write preamble mode - 0: 1tCK preamble - 1: 2tCK preamble Present only with MEMC_FREQ_RATIO=2*/
+#undef DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_DEFVAL 
+#undef DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_SHIFT 
+#undef DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_MASK 
+#define DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_DEFVAL                                      0x0004040D
+#define DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_SHIFT                                       30
+#define DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_MASK                                        0x40000000U
+
+/*tCCD_S: This is the minimum time between two reads or two writes for different bank group. For bank switching (from bank 'a' 
+		o bank 'b'), the minimum time is this value + 1. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_S/2) and ro
+		nd it up to the next integer value. Present only in designs configured to support DDR4. Unit: clocks.*/
+#undef DDRC_DRAMTMG9_T_CCD_S_DEFVAL 
+#undef DDRC_DRAMTMG9_T_CCD_S_SHIFT 
+#undef DDRC_DRAMTMG9_T_CCD_S_MASK 
+#define DDRC_DRAMTMG9_T_CCD_S_DEFVAL                                               0x0004040D
+#define DDRC_DRAMTMG9_T_CCD_S_SHIFT                                                16
+#define DDRC_DRAMTMG9_T_CCD_S_MASK                                                 0x00070000U
+
+/*tRRD_S: Minimum time between activates from bank 'a' to bank 'b' for different bank group. For configurations with MEMC_FREQ_
+		ATIO=2, program this to (tRRD_S/2) and round it up to the next integer value. Present only in designs configured to support D
+		R4. Unit: Clocks.*/
+#undef DDRC_DRAMTMG9_T_RRD_S_DEFVAL 
+#undef DDRC_DRAMTMG9_T_RRD_S_SHIFT 
+#undef DDRC_DRAMTMG9_T_RRD_S_MASK 
+#define DDRC_DRAMTMG9_T_RRD_S_DEFVAL                                               0x0004040D
+#define DDRC_DRAMTMG9_T_RRD_S_SHIFT                                                8
+#define DDRC_DRAMTMG9_T_RRD_S_MASK                                                 0x00000F00U
+
+/*CWL + PL + BL/2 + tWTR_S Minimum time from write command to read command for different bank group. Includes time for bus turn
+		round, recovery times, and all per-bank, per-rank, and global constraints. Present only in designs configured to support DDR4
+		 Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burst length. This must match the value programm
+		d in the BL bit of the mode register to the SDRAM - tWTR_S = internal write to read command delay for different bank group. T
+		is comes directly from the SDRAM specification. For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using 
+		he above equation by 2, and round it up to next integer.*/
+#undef DDRC_DRAMTMG9_WR2RD_S_DEFVAL 
+#undef DDRC_DRAMTMG9_WR2RD_S_SHIFT 
+#undef DDRC_DRAMTMG9_WR2RD_S_MASK 
+#define DDRC_DRAMTMG9_WR2RD_S_DEFVAL                                               0x0004040D
+#define DDRC_DRAMTMG9_WR2RD_S_SHIFT                                                0
+#define DDRC_DRAMTMG9_WR2RD_S_MASK                                                 0x0000003FU
+
+/*tXMPDLL: This is the minimum Exit MPSM to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program
+		this to (tXMPDLL/2) and round it up to the next integer value. Present only in designs configured to support DDR4. Unit: Mult
+		ples of 32 clocks.*/
+#undef DDRC_DRAMTMG11_POST_MPSM_GAP_X32_DEFVAL 
+#undef DDRC_DRAMTMG11_POST_MPSM_GAP_X32_SHIFT 
+#undef DDRC_DRAMTMG11_POST_MPSM_GAP_X32_MASK 
+#define DDRC_DRAMTMG11_POST_MPSM_GAP_X32_DEFVAL                                    0x440C021C
+#define DDRC_DRAMTMG11_POST_MPSM_GAP_X32_SHIFT                                     24
+#define DDRC_DRAMTMG11_POST_MPSM_GAP_X32_MASK                                      0x7F000000U
+
+/*tMPX_LH: This is the minimum CS_n Low hold time to CKE rising edge. For configurations with MEMC_FREQ_RATIO=2, program this t
+		 RoundUp(tMPX_LH/2)+1. Present only in designs configured to support DDR4. Unit: clocks.*/
+#undef DDRC_DRAMTMG11_T_MPX_LH_DEFVAL 
+#undef DDRC_DRAMTMG11_T_MPX_LH_SHIFT 
+#undef DDRC_DRAMTMG11_T_MPX_LH_MASK 
+#define DDRC_DRAMTMG11_T_MPX_LH_DEFVAL                                             0x440C021C
+#define DDRC_DRAMTMG11_T_MPX_LH_SHIFT                                              16
+#define DDRC_DRAMTMG11_T_MPX_LH_MASK                                               0x001F0000U
+
+/*tMPX_S: Minimum time CS setup time to CKE. For configurations with MEMC_FREQ_RATIO=2, program this to (tMPX_S/2) and round it
+		up to the next integer value. Present only in designs configured to support DDR4. Unit: Clocks.*/
+#undef DDRC_DRAMTMG11_T_MPX_S_DEFVAL 
+#undef DDRC_DRAMTMG11_T_MPX_S_SHIFT 
+#undef DDRC_DRAMTMG11_T_MPX_S_MASK 
+#define DDRC_DRAMTMG11_T_MPX_S_DEFVAL                                              0x440C021C
+#define DDRC_DRAMTMG11_T_MPX_S_SHIFT                                               8
+#define DDRC_DRAMTMG11_T_MPX_S_MASK                                                0x00000300U
+
+/*tCKMPE: Minimum valid clock requirement after MPSM entry. Present only in designs configured to support DDR4. Unit: Clocks. F
+		r configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next i
+		teger.*/
+#undef DDRC_DRAMTMG11_T_CKMPE_DEFVAL 
+#undef DDRC_DRAMTMG11_T_CKMPE_SHIFT 
+#undef DDRC_DRAMTMG11_T_CKMPE_MASK 
+#define DDRC_DRAMTMG11_T_CKMPE_DEFVAL                                              0x440C021C
+#define DDRC_DRAMTMG11_T_CKMPE_SHIFT                                               0
+#define DDRC_DRAMTMG11_T_CKMPE_MASK                                                0x0000001FU
+
+/*tCMDCKE: Delay from valid command to CKE input LOW. Set this to the larger of tESCKE or tCMDCKE For configurations with MEMC_
+		REQ_RATIO=2, program this to (max(tESCKE, tCMDCKE)/2) and round it up to next integer value.*/
+#undef DDRC_DRAMTMG12_T_CMDCKE_DEFVAL 
+#undef DDRC_DRAMTMG12_T_CMDCKE_SHIFT 
+#undef DDRC_DRAMTMG12_T_CMDCKE_MASK 
+#define DDRC_DRAMTMG12_T_CMDCKE_DEFVAL                                             0x00020610
+#define DDRC_DRAMTMG12_T_CMDCKE_SHIFT                                              16
+#define DDRC_DRAMTMG12_T_CMDCKE_MASK                                               0x00030000U
+
+/*tCKEHCMD: Valid command requirement after CKE input HIGH. For configurations with MEMC_FREQ_RATIO=2, program this to (tCKEHCM
+		/2) and round it up to next integer value.*/
+#undef DDRC_DRAMTMG12_T_CKEHCMD_DEFVAL 
+#undef DDRC_DRAMTMG12_T_CKEHCMD_SHIFT 
+#undef DDRC_DRAMTMG12_T_CKEHCMD_MASK 
+#define DDRC_DRAMTMG12_T_CKEHCMD_DEFVAL                                            0x00020610
+#define DDRC_DRAMTMG12_T_CKEHCMD_SHIFT                                             8
+#define DDRC_DRAMTMG12_T_CKEHCMD_MASK                                              0x00000F00U
+
+/*tMRD_PDA: This is the Mode Register Set command cycle time in PDA mode. For configurations with MEMC_FREQ_RATIO=2, program th
+		s to (tMRD_PDA/2) and round it up to next integer value.*/
+#undef DDRC_DRAMTMG12_T_MRD_PDA_DEFVAL 
+#undef DDRC_DRAMTMG12_T_MRD_PDA_SHIFT 
+#undef DDRC_DRAMTMG12_T_MRD_PDA_MASK 
+#define DDRC_DRAMTMG12_T_MRD_PDA_DEFVAL                                            0x00020610
+#define DDRC_DRAMTMG12_T_MRD_PDA_SHIFT                                             0
+#define DDRC_DRAMTMG12_T_MRD_PDA_MASK                                              0x0000001FU
+
+/*- 1 - Disable uMCTL2 generation of ZQCS/MPC(ZQ calibration) command. Register DBGCMD.zq_calib_short can be used instead to is
+		ue ZQ calibration request from APB module. - 0 - Internally generate ZQCS/MPC(ZQ calibration) commands based on ZQCTL1.t_zq_s
+		ort_interval_x1024. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_DIS_AUTO_ZQ_DEFVAL 
+#undef DDRC_ZQCTL0_DIS_AUTO_ZQ_SHIFT 
+#undef DDRC_ZQCTL0_DIS_AUTO_ZQ_MASK 
+#define DDRC_ZQCTL0_DIS_AUTO_ZQ_DEFVAL                                             0x02000040
+#define DDRC_ZQCTL0_DIS_AUTO_ZQ_SHIFT                                              31
+#define DDRC_ZQCTL0_DIS_AUTO_ZQ_MASK                                               0x80000000U
+
+/*- 1 - Disable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Powerdown exit. Only applicable when run in DDR3
+		or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. - 0 - Enable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Power
+		own exit. Only applicable when run in DDR3 or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. This is only present for designs suppo
+		ting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_DIS_SRX_ZQCL_DEFVAL 
+#undef DDRC_ZQCTL0_DIS_SRX_ZQCL_SHIFT 
+#undef DDRC_ZQCTL0_DIS_SRX_ZQCL_MASK 
+#define DDRC_ZQCTL0_DIS_SRX_ZQCL_DEFVAL                                            0x02000040
+#define DDRC_ZQCTL0_DIS_SRX_ZQCL_SHIFT                                             30
+#define DDRC_ZQCTL0_DIS_SRX_ZQCL_MASK                                              0x40000000U
+
+/*- 1 - Denotes that ZQ resistor is shared between ranks. Means ZQinit/ZQCL/ZQCS/MPC(ZQ calibration) commands are sent to one r
+		nk at a time with tZQinit/tZQCL/tZQCS/tZQCAL/tZQLAT timing met between commands so that commands to different ranks do not ov
+		rlap. - 0 - ZQ resistor is not shared. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_DEFVAL 
+#undef DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_SHIFT 
+#undef DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_MASK 
+#define DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_DEFVAL                                      0x02000040
+#define DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_SHIFT                                       29
+#define DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_MASK                                        0x20000000U
+
+/*- 1 - Disable issuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. - 0 - Enable 
+		ssuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. This is only present for des
+		gns supporting DDR4 devices.*/
+#undef DDRC_ZQCTL0_DIS_MPSMX_ZQCL_DEFVAL 
+#undef DDRC_ZQCTL0_DIS_MPSMX_ZQCL_SHIFT 
+#undef DDRC_ZQCTL0_DIS_MPSMX_ZQCL_MASK 
+#define DDRC_ZQCTL0_DIS_MPSMX_ZQCL_DEFVAL                                          0x02000040
+#define DDRC_ZQCTL0_DIS_MPSMX_ZQCL_SHIFT                                           28
+#define DDRC_ZQCTL0_DIS_MPSMX_ZQCL_MASK                                            0x10000000U
+
+/*tZQoper for DDR3/DDR4, tZQCL for LPDDR2/LPDDR3, tZQCAL for LPDDR4: Number of cycles of NOP required after a ZQCL (ZQ calibrat
+		on long)/MPC(ZQ Start) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2: DDR3/DDR4: program this to tZQo
+		er/2 and round it up to the next integer value. LPDDR2/LPDDR3: program this to tZQCL/2 and round it up to the next integer va
+		ue. LPDDR4: program this to tZQCAL/2 and round it up to the next integer value. Unit: Clock cycles. This is only present for 
+		esigns supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL0_T_ZQ_LONG_NOP_DEFVAL 
+#undef DDRC_ZQCTL0_T_ZQ_LONG_NOP_SHIFT 
+#undef DDRC_ZQCTL0_T_ZQ_LONG_NOP_MASK 
+#define DDRC_ZQCTL0_T_ZQ_LONG_NOP_DEFVAL                                           0x02000040
+#define DDRC_ZQCTL0_T_ZQ_LONG_NOP_SHIFT                                            16
+#define DDRC_ZQCTL0_T_ZQ_LONG_NOP_MASK                                             0x07FF0000U
+
+/*tZQCS for DDR3/DD4/LPDDR2/LPDDR3, tZQLAT for LPDDR4: Number of cycles of NOP required after a ZQCS (ZQ calibration short)/MPC
+		ZQ Latch) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2, program this to tZQCS/2 and round it up to t
+		e next integer value. Unit: Clock cycles. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devic
+		s.*/
+#undef DDRC_ZQCTL0_T_ZQ_SHORT_NOP_DEFVAL 
+#undef DDRC_ZQCTL0_T_ZQ_SHORT_NOP_SHIFT 
+#undef DDRC_ZQCTL0_T_ZQ_SHORT_NOP_MASK 
+#define DDRC_ZQCTL0_T_ZQ_SHORT_NOP_DEFVAL                                          0x02000040
+#define DDRC_ZQCTL0_T_ZQ_SHORT_NOP_SHIFT                                           0
+#define DDRC_ZQCTL0_T_ZQ_SHORT_NOP_MASK                                            0x000003FFU
+
+/*tZQReset: Number of cycles of NOP required after a ZQReset (ZQ calibration Reset) command is issued to SDRAM. For configurati
+		ns with MEMC_FREQ_RATIO=2, program this to tZQReset/2 and round it up to the next integer value. Unit: Clock cycles. This is 
+		nly present for designs supporting LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL1_T_ZQ_RESET_NOP_DEFVAL 
+#undef DDRC_ZQCTL1_T_ZQ_RESET_NOP_SHIFT 
+#undef DDRC_ZQCTL1_T_ZQ_RESET_NOP_MASK 
+#define DDRC_ZQCTL1_T_ZQ_RESET_NOP_DEFVAL                                          0x02000100
+#define DDRC_ZQCTL1_T_ZQ_RESET_NOP_SHIFT                                           20
+#define DDRC_ZQCTL1_T_ZQ_RESET_NOP_MASK                                            0x3FF00000U
+
+/*Average interval to wait between automatically issuing ZQCS (ZQ calibration short)/MPC(ZQ calibration) commands to DDR3/DDR4/
+		PDDR2/LPDDR3/LPDDR4 devices. Meaningless, if ZQCTL0.dis_auto_zq=1. Unit: 1024 clock cycles. This is only present for designs 
+		upporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.*/
+#undef DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_DEFVAL 
+#undef DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_SHIFT 
+#undef DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_MASK 
+#define DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_DEFVAL                               0x02000100
+#define DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_SHIFT                                0
+#define DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_MASK                                 0x000FFFFFU
+
+/*Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.*/
+#undef DDRC_DFITMG0_DFI_T_CTRL_DELAY_DEFVAL 
+#undef DDRC_DFITMG0_DFI_T_CTRL_DELAY_SHIFT 
+#undef DDRC_DFITMG0_DFI_T_CTRL_DELAY_MASK 
+#define DDRC_DFITMG0_DFI_T_CTRL_DELAY_DEFVAL                                       0x07020002
+#define DDRC_DFITMG0_DFI_T_CTRL_DELAY_SHIFT                                        24
+#define DDRC_DFITMG0_DFI_T_CTRL_DELAY_MASK                                         0x1F000000U
+
+/*Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.*/
+#undef DDRC_DFITMG0_DFI_RDDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_DFI_RDDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_DFI_RDDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_DFI_RDDATA_USE_SDR_DEFVAL                                     0x07020002
+#define DDRC_DFITMG0_DFI_RDDATA_USE_SDR_SHIFT                                      23
+#define DDRC_DFITMG0_DFI_RDDATA_USE_SDR_MASK                                       0x00800000U
+
+/*Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks*/
+#undef DDRC_DFITMG0_DFI_T_RDDATA_EN_DEFVAL 
+#undef DDRC_DFITMG0_DFI_T_RDDATA_EN_SHIFT 
+#undef DDRC_DFITMG0_DFI_T_RDDATA_EN_MASK 
+#define DDRC_DFITMG0_DFI_T_RDDATA_EN_DEFVAL                                        0x07020002
+#define DDRC_DFITMG0_DFI_T_RDDATA_EN_SHIFT                                         16
+#define DDRC_DFITMG0_DFI_T_RDDATA_EN_MASK                                          0x003F0000U
+
+/*Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.*/
+#undef DDRC_DFITMG0_DFI_WRDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_DFI_WRDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_DFI_WRDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_DFI_WRDATA_USE_SDR_DEFVAL                                     0x07020002
+#define DDRC_DFITMG0_DFI_WRDATA_USE_SDR_SHIFT                                      15
+#define DDRC_DFITMG0_DFI_WRDATA_USE_SDR_MASK                                       0x00008000U
+
+/*Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks*/
+#undef DDRC_DFITMG0_DFI_TPHY_WRDATA_DEFVAL 
+#undef DDRC_DFITMG0_DFI_TPHY_WRDATA_SHIFT 
+#undef DDRC_DFITMG0_DFI_TPHY_WRDATA_MASK 
+#define DDRC_DFITMG0_DFI_TPHY_WRDATA_DEFVAL                                        0x07020002
+#define DDRC_DFITMG0_DFI_TPHY_WRDATA_SHIFT                                         8
+#define DDRC_DFITMG0_DFI_TPHY_WRDATA_MASK                                          0x00003F00U
+
+/*Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.*/
+#undef DDRC_DFITMG0_DFI_TPHY_WRLAT_DEFVAL 
+#undef DDRC_DFITMG0_DFI_TPHY_WRLAT_SHIFT 
+#undef DDRC_DFITMG0_DFI_TPHY_WRLAT_MASK 
+#define DDRC_DFITMG0_DFI_TPHY_WRLAT_DEFVAL                                         0x07020002
+#define DDRC_DFITMG0_DFI_TPHY_WRLAT_SHIFT                                          0
+#define DDRC_DFITMG0_DFI_TPHY_WRLAT_MASK                                           0x0000003FU
+
+/*Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated command is driven. 
+		his field is used for CAL mode, should be set to '0' or the value which matches the CAL mode register setting in the DRAM. If
+		the PHY can add the latency for CAL mode, this should be set to '0'. Valid Range: 0, 3, 4, 5, 6, and 8*/
+#undef DDRC_DFITMG1_DFI_T_CMD_LAT_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_CMD_LAT_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_CMD_LAT_MASK 
+#define DDRC_DFITMG1_DFI_T_CMD_LAT_DEFVAL                                          0x00000404
+#define DDRC_DFITMG1_DFI_T_CMD_LAT_SHIFT                                           28
+#define DDRC_DFITMG1_DFI_T_CMD_LAT_MASK                                            0xF0000000U
+
+/*Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated dfi_parity_in signa
+		 is driven.*/
+#undef DDRC_DFITMG1_DFI_T_PARIN_LAT_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_PARIN_LAT_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_PARIN_LAT_MASK 
+#define DDRC_DFITMG1_DFI_T_PARIN_LAT_DEFVAL                                        0x00000404
+#define DDRC_DFITMG1_DFI_T_PARIN_LAT_SHIFT                                         24
+#define DDRC_DFITMG1_DFI_T_PARIN_LAT_MASK                                          0x03000000U
+
+/*Specifies the number of DFI clocks between when the dfi_wrdata_en signal is asserted and when the corresponding write data tr
+		nsfer is completed on the DRAM bus. This corresponds to the DFI timing parameter twrdata_delay. Refer to PHY specification fo
+		 correct value. For DFI 3.0 PHY, set to twrdata_delay, a new timing parameter introduced in DFI 3.0. For DFI 2.1 PHY, set to 
+		phy_wrdata + (delay of DFI write data to the DRAM). Value to be programmed is in terms of DFI clocks, not PHY clocks. In FREQ
+		RATIO=2, divide PHY's value by 2 and round up to next integer. If using DFITMG0.dfi_wrdata_use_sdr=1, add 1 to the value. Uni
+		: Clocks*/
+#undef DDRC_DFITMG1_DFI_T_WRDATA_DELAY_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_WRDATA_DELAY_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_WRDATA_DELAY_MASK 
+#define DDRC_DFITMG1_DFI_T_WRDATA_DELAY_DEFVAL                                     0x00000404
+#define DDRC_DFITMG1_DFI_T_WRDATA_DELAY_SHIFT                                      16
+#define DDRC_DFITMG1_DFI_T_WRDATA_DELAY_MASK                                       0x001F0000U
+
+/*Specifies the number of DFI clock cycles from the assertion of the dfi_dram_clk_disable signal on the DFI until the clock to 
+		he DRAM memory devices, at the PHY-DRAM boundary, maintains a low value. If the DFI clock and the memory clock are not phase 
+		ligned, this timing parameter should be rounded up to the next integer value.*/
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_MASK 
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_DEFVAL                                 0x00000404
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_SHIFT                                  8
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_MASK                                   0x00000F00U
+
+/*Specifies the number of DFI clock cycles from the de-assertion of the dfi_dram_clk_disable signal on the DFI until the first 
+		alid rising edge of the clock to the DRAM memory devices, at the PHY-DRAM boundary. If the DFI clock and the memory clock are
+		not phase aligned, this timing parameter should be rounded up to the next integer value.*/
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_DEFVAL 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_SHIFT 
+#undef DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_MASK 
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_DEFVAL                                  0x00000404
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_SHIFT                                   0
+#define DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_MASK                                    0x0000000FU
+
+/*Setting for DFI's tlp_resp time. Same value is used for both Power Down, Self Refresh, Deep Power Down and Maximum Power Savi
+		g modes. DFI 2.1 specification onwards, recommends using a fixed value of 7 always.*/
+#undef DDRC_DFILPCFG0_DFI_TLP_RESP_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_TLP_RESP_MASK 
+#define DDRC_DFILPCFG0_DFI_TLP_RESP_DEFVAL                                         0x07000000
+#define DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT                                          24
+#define DDRC_DFILPCFG0_DFI_TLP_RESP_MASK                                           0x0F000000U
+
+/*Value to drive on dfi_lp_wakeup signal when Deep Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16
+		cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7
+		- 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 
+		31072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting mDDR or LPDDR2/LPDDR3 device
+		.*/
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_DEFVAL                                    0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_SHIFT                                     20
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK                                      0x00F00000U
+
+/*Enables DFI Low Power interface handshaking during Deep Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled This is only pres
+		nt for designs supporting mDDR or LPDDR2/LPDDR3 devices.*/
+#undef DDRC_DFILPCFG0_DFI_LP_EN_DPD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_EN_DPD_DEFVAL                                        0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT                                         16
+#define DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK                                          0x00010000U
+
+/*Value to drive on dfi_lp_wakeup signal when Self Refresh mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cy
+		les - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 
+		048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 131
+		72 cycles - 0xE - 262144 cycles - 0xF - Unlimited*/
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_DEFVAL                                     0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT                                      12
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK                                       0x0000F000U
+
+/*Enables DFI Low Power interface handshaking during Self Refresh Entry/Exit. - 0 - Disabled - 1 - Enabled*/
+#undef DDRC_DFILPCFG0_DFI_LP_EN_SR_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_EN_SR_DEFVAL                                         0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT                                          8
+#define DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK                                           0x00000100U
+
+/*Value to drive on dfi_lp_wakeup signal when Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cycl
+		s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20
+		8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107
+		 cycles - 0xE - 262144 cycles - 0xF - Unlimited*/
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_DEFVAL                                     0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT                                      4
+#define DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK                                       0x000000F0U
+
+/*Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled*/
+#undef DDRC_DFILPCFG0_DFI_LP_EN_PD_DEFVAL 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT 
+#undef DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK 
+#define DDRC_DFILPCFG0_DFI_LP_EN_PD_DEFVAL                                         0x07000000
+#define DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT                                          0
+#define DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK                                           0x00000001U
+
+/*Value to drive on dfi_lp_wakeup signal when Maximum Power Saving Mode is entered. Determines the DFI's tlp_wakeup time: - 0x0
+		- 16 cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles 
+		 0x7 - 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0
+		D - 131072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting DDR4 devices.*/
+#undef DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_DEFVAL 
+#undef DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_SHIFT 
+#undef DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_MASK 
+#define DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_DEFVAL                                   0x00000000
+#define DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_SHIFT                                    4
+#define DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_MASK                                     0x000000F0U
+
+/*Enables DFI Low Power interface handshaking during Maximum Power Saving Mode Entry/Exit. - 0 - Disabled - 1 - Enabled This is
+		only present for designs supporting DDR4 devices.*/
+#undef DDRC_DFILPCFG1_DFI_LP_EN_MPSM_DEFVAL 
+#undef DDRC_DFILPCFG1_DFI_LP_EN_MPSM_SHIFT 
+#undef DDRC_DFILPCFG1_DFI_LP_EN_MPSM_MASK 
+#define DDRC_DFILPCFG1_DFI_LP_EN_MPSM_DEFVAL                                       0x00000000
+#define DDRC_DFILPCFG1_DFI_LP_EN_MPSM_SHIFT                                        0
+#define DDRC_DFILPCFG1_DFI_LP_EN_MPSM_MASK                                         0x00000001U
+
+/*This is the minimum amount of time between uMCTL2 initiated DFI update requests (which is executed whenever the uMCTL2 is idl
+		). Set this number higher to reduce the frequency of update requests, which can have a small impact on the latency of the fir
+		t read request when the uMCTL2 is idle. Unit: 1024 clocks*/
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_DEFVAL 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_SHIFT 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_MASK 
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_DEFVAL                       0x00000000
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_SHIFT                        16
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_MASK                         0x00FF0000U
+
+/*This is the maximum amount of time between uMCTL2 initiated DFI update requests. This timer resets with each update request; 
+		hen the timer expires dfi_ctrlupd_req is sent and traffic is blocked until the dfi_ctrlupd_ackx is received. PHY can use this
+		idle time to recalibrate the delay lines to the DLLs. The DFI controller update is also used to reset PHY FIFO pointers in ca
+		e of data capture errors. Updates are required to maintain calibration over PVT, but frequent updates may impact performance.
+		Note: Value programmed for DFIUPD1.dfi_t_ctrlupd_interval_max_x1024 must be greater than DFIUPD1.dfi_t_ctrlupd_interval_min_x
+		024. Unit: 1024 clocks*/
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_DEFVAL 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_SHIFT 
+#undef DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_MASK 
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_DEFVAL                       0x00000000
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_SHIFT                        0
+#define DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_MASK                         0x000000FFU
+
+/*Defines polarity of dfi_wrdata_cs and dfi_rddata_cs signals. - 0: Signals are active low - 1: Signals are active high*/
+#undef DDRC_DFIMISC_DFI_DATA_CS_POLARITY_DEFVAL 
+#undef DDRC_DFIMISC_DFI_DATA_CS_POLARITY_SHIFT 
+#undef DDRC_DFIMISC_DFI_DATA_CS_POLARITY_MASK 
+#define DDRC_DFIMISC_DFI_DATA_CS_POLARITY_DEFVAL                                   0x00000001
+#define DDRC_DFIMISC_DFI_DATA_CS_POLARITY_SHIFT                                    2
+#define DDRC_DFIMISC_DFI_DATA_CS_POLARITY_MASK                                     0x00000004U
+
+/*DBI implemented in DDRC or PHY. - 0 - DDRC implements DBI functionality. - 1 - PHY implements DBI functionality. Present only
+		in designs configured to support DDR4 and LPDDR4.*/
+#undef DDRC_DFIMISC_PHY_DBI_MODE_DEFVAL 
+#undef DDRC_DFIMISC_PHY_DBI_MODE_SHIFT 
+#undef DDRC_DFIMISC_PHY_DBI_MODE_MASK 
+#define DDRC_DFIMISC_PHY_DBI_MODE_DEFVAL                                           0x00000001
+#define DDRC_DFIMISC_PHY_DBI_MODE_SHIFT                                            1
+#define DDRC_DFIMISC_PHY_DBI_MODE_MASK                                             0x00000002U
+
+/*PHY initialization complete enable signal. When asserted the dfi_init_complete signal can be used to trigger SDRAM initialisa
+		ion*/
+#undef DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_DEFVAL 
+#undef DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_SHIFT 
+#undef DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_MASK 
+#define DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_DEFVAL                                   0x00000001
+#define DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_SHIFT                                    0
+#define DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_MASK                                     0x00000001U
+
+/*>Number of clocks between when a read command is sent on the DFI control interface and when the associated dfi_rddata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_rdcslat. Refer to PHY specification for correct value.*/
+#undef DDRC_DFITMG2_DFI_TPHY_RDCSLAT_DEFVAL 
+#undef DDRC_DFITMG2_DFI_TPHY_RDCSLAT_SHIFT 
+#undef DDRC_DFITMG2_DFI_TPHY_RDCSLAT_MASK 
+#define DDRC_DFITMG2_DFI_TPHY_RDCSLAT_DEFVAL                                       0x00000202
+#define DDRC_DFITMG2_DFI_TPHY_RDCSLAT_SHIFT                                        8
+#define DDRC_DFITMG2_DFI_TPHY_RDCSLAT_MASK                                         0x00003F00U
+
+/*Number of clocks between when a write command is sent on the DFI control interface and when the associated dfi_wrdata_cs sign
+		l is asserted. This corresponds to the DFI timing parameter tphy_wrcslat. Refer to PHY specification for correct value.*/
+#undef DDRC_DFITMG2_DFI_TPHY_WRCSLAT_DEFVAL 
+#undef DDRC_DFITMG2_DFI_TPHY_WRCSLAT_SHIFT 
+#undef DDRC_DFITMG2_DFI_TPHY_WRCSLAT_MASK 
+#define DDRC_DFITMG2_DFI_TPHY_WRCSLAT_DEFVAL                                       0x00000202
+#define DDRC_DFITMG2_DFI_TPHY_WRCSLAT_SHIFT                                        0
+#define DDRC_DFITMG2_DFI_TPHY_WRCSLAT_MASK                                         0x0000003FU
+
+/*Read DBI enable signal in DDRC. - 0 - Read DBI is disabled. - 1 - Read DBI is enabled. This signal must be set the same value
+		as DRAM's mode register. - DDR4: MR5 bit A12. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[6]*/
+#undef DDRC_DBICTL_RD_DBI_EN_DEFVAL 
+#undef DDRC_DBICTL_RD_DBI_EN_SHIFT 
+#undef DDRC_DBICTL_RD_DBI_EN_MASK 
+#define DDRC_DBICTL_RD_DBI_EN_DEFVAL                                               0x00000001
+#define DDRC_DBICTL_RD_DBI_EN_SHIFT                                                2
+#define DDRC_DBICTL_RD_DBI_EN_MASK                                                 0x00000004U
+
+/*Write DBI enable signal in DDRC. - 0 - Write DBI is disabled. - 1 - Write DBI is enabled. This signal must be set the same va
+		ue as DRAM's mode register. - DDR4: MR5 bit A11. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[7]*/
+#undef DDRC_DBICTL_WR_DBI_EN_DEFVAL 
+#undef DDRC_DBICTL_WR_DBI_EN_SHIFT 
+#undef DDRC_DBICTL_WR_DBI_EN_MASK 
+#define DDRC_DBICTL_WR_DBI_EN_DEFVAL                                               0x00000001
+#define DDRC_DBICTL_WR_DBI_EN_SHIFT                                                1
+#define DDRC_DBICTL_WR_DBI_EN_MASK                                                 0x00000002U
+
+/*DM enable signal in DDRC. - 0 - DM is disabled. - 1 - DM is enabled. This signal must be set the same logical value as DRAM's
+		mode register. - DDR4: Set this to same value as MR5 bit A10. When x4 devices are used, this signal must be set to 0. - LPDDR
+		: Set this to inverted value of MR13[5] which is opposite polarity from this signal*/
+#undef DDRC_DBICTL_DM_EN_DEFVAL 
+#undef DDRC_DBICTL_DM_EN_SHIFT 
+#undef DDRC_DBICTL_DM_EN_MASK 
+#define DDRC_DBICTL_DM_EN_DEFVAL                                                   0x00000001
+#define DDRC_DBICTL_DM_EN_SHIFT                                                    0
+#define DDRC_DBICTL_DM_EN_MASK                                                     0x00000001U
+
+/*Selects the HIF address bit used as rank address bit 0. Valid Range: 0 to 27, and 31 Internal Base: 6 The selected HIF addres
+		 bit is determined by adding the internal base to the value of this field. If set to 31, rank address bit 0 is set to 0.*/
+#undef DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_DEFVAL 
+#undef DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_SHIFT 
+#undef DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_MASK 
+#define DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_DEFVAL                                       
+#define DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_SHIFT                                        0
+#define DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_MASK                                         0x0000001FU
+
+/*Selects the HIF address bit used as bank address bit 2. Valid Range: 0 to 29 and 31 Internal Base: 4 The selected HIF address
+		bit is determined by adding the internal base to the value of this field. If set to 31, bank address bit 2 is set to 0.*/
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B2_DEFVAL 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B2_SHIFT 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B2_MASK 
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B2_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B2_SHIFT                                        16
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B2_MASK                                         0x001F0000U
+
+/*Selects the HIF address bits used as bank address bit 1. Valid Range: 0 to 30 Internal Base: 3 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B1_DEFVAL 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B1_SHIFT 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B1_MASK 
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B1_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B1_SHIFT                                        8
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B1_MASK                                         0x00001F00U
+
+/*Selects the HIF address bits used as bank address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address bit f
+		r each of the bank address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B0_DEFVAL 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B0_SHIFT 
+#undef DDRC_ADDRMAP1_ADDRMAP_BANK_B0_MASK 
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B0_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B0_SHIFT                                        0
+#define DDRC_ADDRMAP1_ADDRMAP_BANK_B0_MASK                                         0x0000001FU
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 5. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 6. - Quarter bus width mode: Selects the HIF address bit used as column address bit 7 . Vali
+		 Range: 0 to 7, and 15 Internal Base: 5 The selected HIF address bit is determined by adding the internal base to the value o
+		 this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B5_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B5_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B5_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B5_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B5_SHIFT                                         24
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B5_MASK                                          0x0F000000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 4. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 5. - Quarter bus width mode: Selects the HIF address bit used as column address bit 6. Valid
+		Range: 0 to 7, and 15 Internal Base: 4 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B4_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B4_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B4_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B4_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B4_SHIFT                                         16
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B4_MASK                                          0x000F0000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 3. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 4. - Quarter bus width mode: Selects the HIF address bit used as column address bit 5. Valid
+		Range: 0 to 7 Internal Base: 3 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=16, it is required to program this to 0, hence register does not exist i
+		 this case.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B3_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B3_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B3_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B3_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B3_SHIFT                                         8
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B3_MASK                                          0x00000F00U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 2. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 3. - Quarter bus width mode: Selects the HIF address bit used as column address bit 4. Valid
+		Range: 0 to 7 Internal Base: 2 The selected HIF address bit is determined by adding the internal base to the value of this fi
+		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=8 or 16, it is required to program this to 0.*/
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B2_DEFVAL 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B2_SHIFT 
+#undef DDRC_ADDRMAP2_ADDRMAP_COL_B2_MASK 
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B2_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B2_SHIFT                                         0
+#define DDRC_ADDRMAP2_ADDRMAP_COL_B2_MASK                                          0x0000000FU
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 9. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: Selects the HIF address bit used as
+		column address bit 13 (11 in LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 9 The selected HIF address bit i
+		 determined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: 
+		er JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source addr
+		ss bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus an
+		 hence column bit 10 is used.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B9_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B9_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B9_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B9_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B9_SHIFT                                         24
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B9_MASK                                          0x0F000000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 8. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 9. - Quarter bus width mode: Selects the HIF address bit used as column address bit 11 (10 i
+		 LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 8 The selected HIF address bit is determined by adding the i
+		ternal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specif
+		cation, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to col
+		mn address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is use
+		.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B8_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B8_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B8_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B8_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B8_SHIFT                                         16
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B8_MASK                                          0x000F0000U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 7. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 8. - Quarter bus width mode: Selects the HIF address bit used as column address bit 9. Valid
+		Range: 0 to 7, and 15 Internal Base: 7 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B7_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B7_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B7_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B7_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B7_SHIFT                                         8
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B7_MASK                                          0x00000F00U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 6. - Half bus width mode: Selects the HIF addre
+		s bit used as column address bit 7. - Quarter bus width mode: Selects the HIF address bit used as column address bit 8. Valid
+		Range: 0 to 7, and 15 Internal Base: 6 The selected HIF address bit is determined by adding the internal base to the value of
+		this field. If set to 15, this column address bit is set to 0.*/
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B6_DEFVAL 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B6_SHIFT 
+#undef DDRC_ADDRMAP3_ADDRMAP_COL_B6_MASK 
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B6_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B6_SHIFT                                         0
+#define DDRC_ADDRMAP3_ADDRMAP_COL_B6_MASK                                          0x0000000FU
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Unused. To make it unused, this should be tied to 4'hF. - Quarter bus width mode: Unused. To make it unused, this must 
+		e tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 11 The selected HIF address bit is determined by adding the intern
+		l base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specificati
+		n, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to column a
+		dress bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is used.*/
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B11_DEFVAL 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B11_SHIFT 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B11_MASK 
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B11_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B11_SHIFT                                        8
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B11_MASK                                         0x00000F00U
+
+/*- Full bus width mode: Selects the HIF address bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Half bus width
+		mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: UNUSED.
+		To make it unused, this must be tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 10 The selected HIF address bit is d
+		termined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per
+		JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source address
+		bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and h
+		nce column bit 10 is used.*/
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B10_DEFVAL 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B10_SHIFT 
+#undef DDRC_ADDRMAP4_ADDRMAP_COL_B10_MASK 
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B10_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B10_SHIFT                                        0
+#define DDRC_ADDRMAP4_ADDRMAP_COL_B10_MASK                                         0x0000000FU
+
+/*Selects the HIF address bit used as row address bit 11. Valid Range: 0 to 11, and 15 Internal Base: 17 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 11 is set to 0.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B11_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B11_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B11_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B11_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B11_SHIFT                                        24
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B11_MASK                                         0x0F000000U
+
+/*Selects the HIF address bits used as row address bits 2 to 10. Valid Range: 0 to 11, and 15 Internal Base: 8 (for row address
+		bit 2), 9 (for row address bit 3), 10 (for row address bit 4) etc increasing to 16 (for row address bit 10) The selected HIF 
+		ddress bit for each of the row address bits is determined by adding the internal base to the value of this field. When value 
+		5 is used the values of row address bits 2 to 10 are defined by registers ADDRMAP9, ADDRMAP10, ADDRMAP11.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_DEFVAL                                     0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_SHIFT                                      16
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_MASK                                       0x000F0000U
+
+/*Selects the HIF address bits used as row address bit 1. Valid Range: 0 to 11 Internal Base: 7 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B1_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B1_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B1_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B1_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B1_SHIFT                                         8
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B1_MASK                                          0x00000F00U
+
+/*Selects the HIF address bits used as row address bit 0. Valid Range: 0 to 11 Internal Base: 6 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B0_DEFVAL 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B0_SHIFT 
+#undef DDRC_ADDRMAP5_ADDRMAP_ROW_B0_MASK 
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B0_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B0_SHIFT                                         0
+#define DDRC_ADDRMAP5_ADDRMAP_ROW_B0_MASK                                          0x0000000FU
+
+/*Set this to 1 if there is an LPDDR3 SDRAM 6Gb or 12Gb device in use. - 1 - LPDDR3 SDRAM 6Gb/12Gb device in use. Every address
+		having row[14:13]==2'b11 is considered as invalid - 0 - non-LPDDR3 6Gb/12Gb device in use. All addresses are valid Present on
+		y in designs configured to support LPDDR3.*/
+#undef DDRC_ADDRMAP6_LPDDR3_6GB_12GB_DEFVAL 
+#undef DDRC_ADDRMAP6_LPDDR3_6GB_12GB_SHIFT 
+#undef DDRC_ADDRMAP6_LPDDR3_6GB_12GB_MASK 
+#define DDRC_ADDRMAP6_LPDDR3_6GB_12GB_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_LPDDR3_6GB_12GB_SHIFT                                        31
+#define DDRC_ADDRMAP6_LPDDR3_6GB_12GB_MASK                                         0x80000000U
+
+/*Selects the HIF address bit used as row address bit 15. Valid Range: 0 to 11, and 15 Internal Base: 21 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 15 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B15_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B15_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B15_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B15_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B15_SHIFT                                        24
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B15_MASK                                         0x0F000000U
+
+/*Selects the HIF address bit used as row address bit 14. Valid Range: 0 to 11, and 15 Internal Base: 20 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 14 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B14_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B14_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B14_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B14_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B14_SHIFT                                        16
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B14_MASK                                         0x000F0000U
+
+/*Selects the HIF address bit used as row address bit 13. Valid Range: 0 to 11, and 15 Internal Base: 19 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 13 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B13_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B13_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B13_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B13_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B13_SHIFT                                        8
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B13_MASK                                         0x00000F00U
+
+/*Selects the HIF address bit used as row address bit 12. Valid Range: 0 to 11, and 15 Internal Base: 18 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 12 is set to 0.*/
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B12_DEFVAL 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B12_SHIFT 
+#undef DDRC_ADDRMAP6_ADDRMAP_ROW_B12_MASK 
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B12_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B12_SHIFT                                        0
+#define DDRC_ADDRMAP6_ADDRMAP_ROW_B12_MASK                                         0x0000000FU
+
+/*Selects the HIF address bit used as row address bit 17. Valid Range: 0 to 10, and 15 Internal Base: 23 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 17 is set to 0.*/
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B17_DEFVAL 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B17_SHIFT 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B17_MASK 
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B17_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B17_SHIFT                                        8
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B17_MASK                                         0x00000F00U
+
+/*Selects the HIF address bit used as row address bit 16. Valid Range: 0 to 11, and 15 Internal Base: 22 The selected HIF addre
+		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 16 is set to 0.*/
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B16_DEFVAL 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B16_SHIFT 
+#undef DDRC_ADDRMAP7_ADDRMAP_ROW_B16_MASK 
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B16_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B16_SHIFT                                        0
+#define DDRC_ADDRMAP7_ADDRMAP_ROW_B16_MASK                                         0x0000000FU
+
+/*Selects the HIF address bits used as bank group address bit 1. Valid Range: 0 to 30, and 31 Internal Base: 3 The selected HIF
+		address bit for each of the bank group address bits is determined by adding the internal base to the value of this field. If 
+		et to 31, bank group address bit 1 is set to 0.*/
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B1_DEFVAL 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B1_SHIFT 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B1_MASK 
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B1_DEFVAL                                         0x00000000
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B1_SHIFT                                          8
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B1_MASK                                           0x00001F00U
+
+/*Selects the HIF address bits used as bank group address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address
+		bit for each of the bank group address bits is determined by adding the internal base to the value of this field.*/
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B0_DEFVAL 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B0_SHIFT 
+#undef DDRC_ADDRMAP8_ADDRMAP_BG_B0_MASK 
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B0_DEFVAL                                         0x00000000
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B0_SHIFT                                          0
+#define DDRC_ADDRMAP8_ADDRMAP_BG_B0_MASK                                           0x0000001FU
+
+/*Selects the HIF address bits used as row address bit 5. Valid Range: 0 to 11 Internal Base: 11 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B5_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B5_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B5_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B5_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B5_SHIFT                                         24
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B5_MASK                                          0x0F000000U
+
+/*Selects the HIF address bits used as row address bit 4. Valid Range: 0 to 11 Internal Base: 10 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B4_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B4_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B4_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B4_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B4_SHIFT                                         16
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B4_MASK                                          0x000F0000U
+
+/*Selects the HIF address bits used as row address bit 3. Valid Range: 0 to 11 Internal Base: 9 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B3_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B3_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B3_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B3_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B3_SHIFT                                         8
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B3_MASK                                          0x00000F00U
+
+/*Selects the HIF address bits used as row address bit 2. Valid Range: 0 to 11 Internal Base: 8 The selected HIF address bit fo
+		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
+		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B2_DEFVAL 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B2_SHIFT 
+#undef DDRC_ADDRMAP9_ADDRMAP_ROW_B2_MASK 
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B2_DEFVAL                                        0x00000000
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B2_SHIFT                                         0
+#define DDRC_ADDRMAP9_ADDRMAP_ROW_B2_MASK                                          0x0000000FU
+
+/*Selects the HIF address bits used as row address bit 9. Valid Range: 0 to 11 Internal Base: 15 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B9_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B9_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B9_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B9_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B9_SHIFT                                        24
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B9_MASK                                         0x0F000000U
+
+/*Selects the HIF address bits used as row address bit 8. Valid Range: 0 to 11 Internal Base: 14 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B8_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B8_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B8_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B8_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B8_SHIFT                                        16
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B8_MASK                                         0x000F0000U
+
+/*Selects the HIF address bits used as row address bit 7. Valid Range: 0 to 11 Internal Base: 13 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B7_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B7_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B7_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B7_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B7_SHIFT                                        8
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B7_MASK                                         0x00000F00U
+
+/*Selects the HIF address bits used as row address bit 6. Valid Range: 0 to 11 Internal Base: 12 The selected HIF address bit f
+		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
+		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B6_DEFVAL 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B6_SHIFT 
+#undef DDRC_ADDRMAP10_ADDRMAP_ROW_B6_MASK 
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B6_DEFVAL                                       0x00000000
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B6_SHIFT                                        0
+#define DDRC_ADDRMAP10_ADDRMAP_ROW_B6_MASK                                         0x0000000FU
+
+/*Selects the HIF address bits used as row address bit 10. Valid Range: 0 to 11 Internal Base: 16 The selected HIF address bit 
+		or each of the row address bits is determined by adding the internal base to the value of this field. This register field is 
+		sed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.*/
+#undef DDRC_ADDRMAP11_ADDRMAP_ROW_B10_DEFVAL 
+#undef DDRC_ADDRMAP11_ADDRMAP_ROW_B10_SHIFT 
+#undef DDRC_ADDRMAP11_ADDRMAP_ROW_B10_MASK 
+#define DDRC_ADDRMAP11_ADDRMAP_ROW_B10_DEFVAL                                      
+#define DDRC_ADDRMAP11_ADDRMAP_ROW_B10_SHIFT                                       0
+#define DDRC_ADDRMAP11_ADDRMAP_ROW_B10_MASK                                        0x0000000FU
+
+/*Cycles to hold ODT for a write command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x5 (DDR2-400/533/
+		67), 0x6 (DDR2-800), 0x7 (DDR2-1066) - BL4: 0x3 (DDR2-400/533/667), 0x4 (DDR2-800), 0x5 (DDR2-1066) DDR3: - BL8: 0x6 DDR4: - 
+		L8: 5 + WR_PREAMBLE + CRC_MODE WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) CRC_MODE = 0 (not CRC mode), 1 
+		CRC mode) LPDDR3: - BL8: 7 + RU(tODTon(max)/tCK)*/
+#undef DDRC_ODTCFG_WR_ODT_HOLD_DEFVAL 
+#undef DDRC_ODTCFG_WR_ODT_HOLD_SHIFT 
+#undef DDRC_ODTCFG_WR_ODT_HOLD_MASK 
+#define DDRC_ODTCFG_WR_ODT_HOLD_DEFVAL                                             0x04000400
+#define DDRC_ODTCFG_WR_ODT_HOLD_SHIFT                                              24
+#define DDRC_ODTCFG_WR_ODT_HOLD_MASK                                               0x0F000000U
+
+/*The delay, in clock cycles, from issuing a write command to setting ODT values associated with that command. ODT setting must
+		remain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CWL + AL - 3 (DDR2-400/533/
+		67), CWL + AL - 4 (DDR2-800), CWL + AL - 5 (DDR2-1066) If (CWL + AL - 3 < 0), uMCTL2 does not support ODT for write operation
+		 DDR3: - 0x0 DDR4: - DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) LPDDR3: - WL - 1 - RU(tODTon(max)/tCK))*/
+#undef DDRC_ODTCFG_WR_ODT_DELAY_DEFVAL 
+#undef DDRC_ODTCFG_WR_ODT_DELAY_SHIFT 
+#undef DDRC_ODTCFG_WR_ODT_DELAY_MASK 
+#define DDRC_ODTCFG_WR_ODT_DELAY_DEFVAL                                            0x04000400
+#define DDRC_ODTCFG_WR_ODT_DELAY_SHIFT                                             16
+#define DDRC_ODTCFG_WR_ODT_DELAY_MASK                                              0x001F0000U
+
+/*Cycles to hold ODT for a read command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x6 (not DDR2-1066)
+		 0x7 (DDR2-1066) - BL4: 0x4 (not DDR2-1066), 0x5 (DDR2-1066) DDR3: - BL8 - 0x6 DDR4: - BL8: 5 + RD_PREAMBLE RD_PREAMBLE = 1 (
+		tCK write preamble), 2 (2tCK write preamble) LPDDR3: - BL8: 5 + RU(tDQSCK(max)/tCK) - RD(tDQSCK(min)/tCK) + RU(tODTon(max)/tC
+		)*/
+#undef DDRC_ODTCFG_RD_ODT_HOLD_DEFVAL 
+#undef DDRC_ODTCFG_RD_ODT_HOLD_SHIFT 
+#undef DDRC_ODTCFG_RD_ODT_HOLD_MASK 
+#define DDRC_ODTCFG_RD_ODT_HOLD_DEFVAL                                             0x04000400
+#define DDRC_ODTCFG_RD_ODT_HOLD_SHIFT                                              8
+#define DDRC_ODTCFG_RD_ODT_HOLD_MASK                                               0x00000F00U
+
+/*The delay, in clock cycles, from issuing a read command to setting ODT values associated with that command. ODT setting must 
+		emain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CL + AL - 4 (not DDR2-1066),
+		CL + AL - 5 (DDR2-1066) If (CL + AL - 4 < 0), uMCTL2 does not support ODT for read operation. DDR3: - CL - CWL DDR4: - CL - C
+		L - RD_PREAMBLE + WR_PREAMBLE + DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK
+		write preamble) RD_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) If (CL - CWL - RD_PREAMBLE + WR_PREAMBLE) < 0,
+		uMCTL2 does not support ODT for read operation. LPDDR3: - RL + RD(tDQSCK(min)/tCK) - 1 - RU(tODTon(max)/tCK)*/
+#undef DDRC_ODTCFG_RD_ODT_DELAY_DEFVAL 
+#undef DDRC_ODTCFG_RD_ODT_DELAY_SHIFT 
+#undef DDRC_ODTCFG_RD_ODT_DELAY_MASK 
+#define DDRC_ODTCFG_RD_ODT_DELAY_DEFVAL                                            0x04000400
+#define DDRC_ODTCFG_RD_ODT_DELAY_SHIFT                                             2
+#define DDRC_ODTCFG_RD_ODT_DELAY_MASK                                              0x0000007CU
+
+/*Indicates which remote ODTs must be turned on during a read from rank 1. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks*/
+#undef DDRC_ODTMAP_RANK1_RD_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK1_RD_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK1_RD_ODT_MASK 
+#define DDRC_ODTMAP_RANK1_RD_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK1_RD_ODT_SHIFT                                             12
+#define DDRC_ODTMAP_RANK1_RD_ODT_MASK                                              0x00003000U
+
+/*Indicates which remote ODTs must be turned on during a write to rank 1. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks*/
+#undef DDRC_ODTMAP_RANK1_WR_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK1_WR_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK1_WR_ODT_MASK 
+#define DDRC_ODTMAP_RANK1_WR_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK1_WR_ODT_SHIFT                                             8
+#define DDRC_ODTMAP_RANK1_WR_ODT_MASK                                              0x00000300U
+
+/*Indicates which remote ODTs must be turned on during a read from rank 0. Each rank has a remote ODT (in the SDRAM) which can 
+		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
+		 etc. For each rank, set its bit to 1 to enable its ODT.*/
+#undef DDRC_ODTMAP_RANK0_RD_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK0_RD_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK0_RD_ODT_MASK 
+#define DDRC_ODTMAP_RANK0_RD_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK0_RD_ODT_SHIFT                                             4
+#define DDRC_ODTMAP_RANK0_RD_ODT_MASK                                              0x00000030U
+
+/*Indicates which remote ODTs must be turned on during a write to rank 0. Each rank has a remote ODT (in the SDRAM) which can b
+		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
+		etc. For each rank, set its bit to 1 to enable its ODT.*/
+#undef DDRC_ODTMAP_RANK0_WR_ODT_DEFVAL 
+#undef DDRC_ODTMAP_RANK0_WR_ODT_SHIFT 
+#undef DDRC_ODTMAP_RANK0_WR_ODT_MASK 
+#define DDRC_ODTMAP_RANK0_WR_ODT_DEFVAL                                            0x00002211
+#define DDRC_ODTMAP_RANK0_WR_ODT_SHIFT                                             0
+#define DDRC_ODTMAP_RANK0_WR_ODT_MASK                                              0x00000003U
+
+/*When the preferred transaction store is empty for these many clock cycles, switch to the alternate transaction store if it is
+		non-empty. The read transaction store (both high and low priority) is the default preferred transaction store and the write t
+		ansaction store is the alternative store. When prefer write over read is set this is reversed. 0x0 is a legal value for this 
+		egister. When set to 0x0, the transaction store switching will happen immediately when the switching conditions become true. 
+		OR PERFORMANCE ONLY*/
+#undef DDRC_SCHED_RDWR_IDLE_GAP_DEFVAL 
+#undef DDRC_SCHED_RDWR_IDLE_GAP_SHIFT 
+#undef DDRC_SCHED_RDWR_IDLE_GAP_MASK 
+#define DDRC_SCHED_RDWR_IDLE_GAP_DEFVAL                                            0x00002005
+#define DDRC_SCHED_RDWR_IDLE_GAP_SHIFT                                             24
+#define DDRC_SCHED_RDWR_IDLE_GAP_MASK                                              0x7F000000U
+
+/*UNUSED*/
+#undef DDRC_SCHED_GO2CRITICAL_HYSTERESIS_DEFVAL 
+#undef DDRC_SCHED_GO2CRITICAL_HYSTERESIS_SHIFT 
+#undef DDRC_SCHED_GO2CRITICAL_HYSTERESIS_MASK 
+#define DDRC_SCHED_GO2CRITICAL_HYSTERESIS_DEFVAL                                   0x00002005
+#define DDRC_SCHED_GO2CRITICAL_HYSTERESIS_SHIFT                                    16
+#define DDRC_SCHED_GO2CRITICAL_HYSTERESIS_MASK                                     0x00FF0000U
+
+/*Number of entries in the low priority transaction store is this value + 1. (MEMC_NO_OF_ENTRY - (SCHED.lpr_num_entries + 1)) i
+		 the number of entries available for the high priority transaction store. Setting this to maximum value allocates all entries
+		to low priority transaction store. Setting this to 0 allocates 1 entry to low priority transaction store and the rest to high
+		priority transaction store. Note: In ECC configurations, the numbers of write and low priority read credits issued is one les
+		 than in the non-ECC case. One entry each is reserved in the write and low-priority read CAMs for storing the RMW requests ar
+		sing out of single bit error correction RMW operation.*/
+#undef DDRC_SCHED_LPR_NUM_ENTRIES_DEFVAL 
+#undef DDRC_SCHED_LPR_NUM_ENTRIES_SHIFT 
+#undef DDRC_SCHED_LPR_NUM_ENTRIES_MASK 
+#define DDRC_SCHED_LPR_NUM_ENTRIES_DEFVAL                                          0x00002005
+#define DDRC_SCHED_LPR_NUM_ENTRIES_SHIFT                                           8
+#define DDRC_SCHED_LPR_NUM_ENTRIES_MASK                                            0x00003F00U
+
+/*If true, bank is kept open only while there are page hit transactions available in the CAM to that bank. The last read or wri
+		e command in the CAM with a bank and page hit will be executed with auto-precharge if SCHED1.pageclose_timer=0. Even if this 
+		egister set to 1 and SCHED1.pageclose_timer is set to 0, explicit precharge (and not auto-precharge) may be issued in some ca
+		es where there is a mode switch between Write and Read or between LPR and HPR. The Read and Write commands that are executed 
+		s part of the ECC scrub requests are also executed without auto-precharge. If false, the bank remains open until there is a n
+		ed to close it (to open a different page, or for page timeout or refresh timeout) - also known as open page policy. The open 
+		age policy can be overridden by setting the per-command-autopre bit on the HIF interface (hif_cmd_autopre). The pageclose fea
+		ure provids a midway between Open and Close page policies. FOR PERFORMANCE ONLY.*/
+#undef DDRC_SCHED_PAGECLOSE_DEFVAL 
+#undef DDRC_SCHED_PAGECLOSE_SHIFT 
+#undef DDRC_SCHED_PAGECLOSE_MASK 
+#define DDRC_SCHED_PAGECLOSE_DEFVAL                                                0x00002005
+#define DDRC_SCHED_PAGECLOSE_SHIFT                                                 2
+#define DDRC_SCHED_PAGECLOSE_MASK                                                  0x00000004U
+
+/*If set then the bank selector prefers writes over reads. FOR DEBUG ONLY.*/
+#undef DDRC_SCHED_PREFER_WRITE_DEFVAL 
+#undef DDRC_SCHED_PREFER_WRITE_SHIFT 
+#undef DDRC_SCHED_PREFER_WRITE_MASK 
+#define DDRC_SCHED_PREFER_WRITE_DEFVAL                                             0x00002005
+#define DDRC_SCHED_PREFER_WRITE_SHIFT                                              1
+#define DDRC_SCHED_PREFER_WRITE_MASK                                               0x00000002U
+
+/*Active low signal. When asserted ('0'), all incoming transactions are forced to low priority. This implies that all High Prio
+		ity Read (HPR) and Variable Priority Read commands (VPR) will be treated as Low Priority Read (LPR) commands. On the write si
+		e, all Variable Priority Write (VPW) commands will be treated as Normal Priority Write (NPW) commands. Forcing the incoming t
+		ansactions to low priority implicitly turns off Bypass path for read commands. FOR PERFORMANCE ONLY.*/
+#undef DDRC_SCHED_FORCE_LOW_PRI_N_DEFVAL 
+#undef DDRC_SCHED_FORCE_LOW_PRI_N_SHIFT 
+#undef DDRC_SCHED_FORCE_LOW_PRI_N_MASK 
+#define DDRC_SCHED_FORCE_LOW_PRI_N_DEFVAL                                          0x00002005
+#define DDRC_SCHED_FORCE_LOW_PRI_N_SHIFT                                           0
+#define DDRC_SCHED_FORCE_LOW_PRI_N_MASK                                            0x00000001U
+
+/*Number of transactions that are serviced once the LPR queue goes critical is the smaller of: - (a) This number - (b) Number o
+		 transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_DEFVAL 
+#undef DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_SHIFT 
+#undef DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_MASK 
+#define DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_DEFVAL                                   0x0F00007F
+#define DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_SHIFT                                    24
+#define DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_MASK                                     0xFF000000U
+
+/*Number of clocks that the LPR queue can be starved before it goes critical. The minimum valid functional value for this regis
+		er is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not
+		be disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFLPR1_LPR_MAX_STARVE_DEFVAL 
+#undef DDRC_PERFLPR1_LPR_MAX_STARVE_SHIFT 
+#undef DDRC_PERFLPR1_LPR_MAX_STARVE_MASK 
+#define DDRC_PERFLPR1_LPR_MAX_STARVE_DEFVAL                                        0x0F00007F
+#define DDRC_PERFLPR1_LPR_MAX_STARVE_SHIFT                                         0
+#define DDRC_PERFLPR1_LPR_MAX_STARVE_MASK                                          0x0000FFFFU
+
+/*Number of transactions that are serviced once the WR queue goes critical is the smaller of: - (a) This number - (b) Number of
+		transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFWR1_W_XACT_RUN_LENGTH_DEFVAL 
+#undef DDRC_PERFWR1_W_XACT_RUN_LENGTH_SHIFT 
+#undef DDRC_PERFWR1_W_XACT_RUN_LENGTH_MASK 
+#define DDRC_PERFWR1_W_XACT_RUN_LENGTH_DEFVAL                                      0x0F00007F
+#define DDRC_PERFWR1_W_XACT_RUN_LENGTH_SHIFT                                       24
+#define DDRC_PERFWR1_W_XACT_RUN_LENGTH_MASK                                        0xFF000000U
+
+/*Number of clocks that the WR queue can be starved before it goes critical. The minimum valid functional value for this regist
+		r is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not 
+		e disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.*/
+#undef DDRC_PERFWR1_W_MAX_STARVE_DEFVAL 
+#undef DDRC_PERFWR1_W_MAX_STARVE_SHIFT 
+#undef DDRC_PERFWR1_W_MAX_STARVE_MASK 
+#define DDRC_PERFWR1_W_MAX_STARVE_DEFVAL                                           0x0F00007F
+#define DDRC_PERFWR1_W_MAX_STARVE_SHIFT                                            0
+#define DDRC_PERFWR1_W_MAX_STARVE_MASK                                             0x0000FFFFU
+
+/*All even ranks have the same DQ mapping controled by DQMAP0-4 register as rank 0. This register provides DQ swap function for
+		all odd ranks to support CRC feature. rank based DQ swapping is: swap bit 0 with 1, swap bit 2 with 3, swap bit 4 with 5 and 
+		wap bit 6 with 7. 1: Disable rank based DQ swapping 0: Enable rank based DQ swapping Present only in designs configured to su
+		port DDR4.*/
+#undef DDRC_DQMAP5_DIS_DQ_RANK_SWAP_DEFVAL 
+#undef DDRC_DQMAP5_DIS_DQ_RANK_SWAP_SHIFT 
+#undef DDRC_DQMAP5_DIS_DQ_RANK_SWAP_MASK 
+#define DDRC_DQMAP5_DIS_DQ_RANK_SWAP_DEFVAL                                        
+#define DDRC_DQMAP5_DIS_DQ_RANK_SWAP_SHIFT                                         0
+#define DDRC_DQMAP5_DIS_DQ_RANK_SWAP_MASK                                          0x00000001U
+
+/*When this is set to '0', auto-precharge is disabled for the flushed command in a collision case. Collision cases are write fo
+		lowed by read to same address, read followed by write to same address, or write followed by write to same address with DBG0.d
+		s_wc bit = 1 (where same address comparisons exclude the two address bits representing critical word). FOR DEBUG ONLY.*/
+#undef DDRC_DBG0_DIS_COLLISION_PAGE_OPT_DEFVAL 
+#undef DDRC_DBG0_DIS_COLLISION_PAGE_OPT_SHIFT 
+#undef DDRC_DBG0_DIS_COLLISION_PAGE_OPT_MASK 
+#define DDRC_DBG0_DIS_COLLISION_PAGE_OPT_DEFVAL                                    0x00000000
+#define DDRC_DBG0_DIS_COLLISION_PAGE_OPT_SHIFT                                     4
+#define DDRC_DBG0_DIS_COLLISION_PAGE_OPT_MASK                                      0x00000010U
+
+/*When 1, disable write combine. FOR DEBUG ONLY*/
+#undef DDRC_DBG0_DIS_WC_DEFVAL 
+#undef DDRC_DBG0_DIS_WC_SHIFT 
+#undef DDRC_DBG0_DIS_WC_MASK 
+#define DDRC_DBG0_DIS_WC_DEFVAL                                                    0x00000000
+#define DDRC_DBG0_DIS_WC_SHIFT                                                     0
+#define DDRC_DBG0_DIS_WC_MASK                                                      0x00000001U
+
+/*Setting this register bit to 1 allows refresh and ZQCS commands to be triggered from hardware via the IOs ext_*. If set to 1,
+		the fields DBGCMD.zq_calib_short and DBGCMD.rank*_refresh have no function, and are ignored by the uMCTL2 logic. Setting this
+		register bit to 0 allows refresh and ZQCS to be triggered from software, via the fields DBGCMD.zq_calib_short and DBGCMD.rank
+		_refresh. If set to 0, the hardware pins ext_* have no function, and are ignored by the uMCTL2 logic. This register is static
+		 and may only be changed when the DDRC reset signal, core_ddrc_rstn, is asserted (0).*/
+#undef DDRC_DBGCMD_HW_REF_ZQ_EN_DEFVAL 
+#undef DDRC_DBGCMD_HW_REF_ZQ_EN_SHIFT 
+#undef DDRC_DBGCMD_HW_REF_ZQ_EN_MASK 
+#define DDRC_DBGCMD_HW_REF_ZQ_EN_DEFVAL                                            0x00000000
+#define DDRC_DBGCMD_HW_REF_ZQ_EN_SHIFT                                             31
+#define DDRC_DBGCMD_HW_REF_ZQ_EN_MASK                                              0x80000000U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a dfi_ctrlupd_req to the PHY. When this request is stored in 
+		he uMCTL2, the bit is automatically cleared. This operation must only be performed when DFIUPD0.dis_auto_ctrlupd=1.*/
+#undef DDRC_DBGCMD_CTRLUPD_DEFVAL 
+#undef DDRC_DBGCMD_CTRLUPD_SHIFT 
+#undef DDRC_DBGCMD_CTRLUPD_MASK 
+#define DDRC_DBGCMD_CTRLUPD_DEFVAL                                                 0x00000000
+#define DDRC_DBGCMD_CTRLUPD_SHIFT                                                  5
+#define DDRC_DBGCMD_CTRLUPD_MASK                                                   0x00000020U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a ZQCS (ZQ calibration short)/MPC(ZQ calibration) command to 
+		he SDRAM. When this request is stored in the uMCTL2, the bit is automatically cleared. This operation can be performed only w
+		en ZQCTL0.dis_auto_zq=1. It is recommended NOT to set this register bit if in Init operating mode. This register bit is ignor
+		d when in Self-Refresh(except LPDDR4) and SR-Powerdown(LPDDR4) and Deep power-down operating modes and Maximum Power Saving M
+		de.*/
+#undef DDRC_DBGCMD_ZQ_CALIB_SHORT_DEFVAL 
+#undef DDRC_DBGCMD_ZQ_CALIB_SHORT_SHIFT 
+#undef DDRC_DBGCMD_ZQ_CALIB_SHORT_MASK 
+#define DDRC_DBGCMD_ZQ_CALIB_SHORT_DEFVAL                                          0x00000000
+#define DDRC_DBGCMD_ZQ_CALIB_SHORT_SHIFT                                           4
+#define DDRC_DBGCMD_ZQ_CALIB_SHORT_MASK                                            0x00000010U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 1. Writing to this bit causes DBGSTAT.rank1
+		refresh_busy to be set. When DBGSTAT.rank1_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.*/
+#undef DDRC_DBGCMD_RANK1_REFRESH_DEFVAL 
+#undef DDRC_DBGCMD_RANK1_REFRESH_SHIFT 
+#undef DDRC_DBGCMD_RANK1_REFRESH_MASK 
+#define DDRC_DBGCMD_RANK1_REFRESH_DEFVAL                                           0x00000000
+#define DDRC_DBGCMD_RANK1_REFRESH_SHIFT                                            1
+#define DDRC_DBGCMD_RANK1_REFRESH_MASK                                             0x00000002U
+
+/*Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 0. Writing to this bit causes DBGSTAT.rank0
+		refresh_busy to be set. When DBGSTAT.rank0_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
+		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
+		wn operating modes or Maximum Power Saving Mode.*/
+#undef DDRC_DBGCMD_RANK0_REFRESH_DEFVAL 
+#undef DDRC_DBGCMD_RANK0_REFRESH_SHIFT 
+#undef DDRC_DBGCMD_RANK0_REFRESH_MASK 
+#define DDRC_DBGCMD_RANK0_REFRESH_DEFVAL                                           0x00000000
+#define DDRC_DBGCMD_RANK0_REFRESH_SHIFT                                            0
+#define DDRC_DBGCMD_RANK0_REFRESH_MASK                                             0x00000001U
+
+/*Enable quasi-dynamic register programming outside reset. Program register to 0 to enable quasi-dynamic programming. Set back 
+		egister to 1 once programming is done.*/
+#undef DDRC_SWCTL_SW_DONE_DEFVAL 
+#undef DDRC_SWCTL_SW_DONE_SHIFT 
+#undef DDRC_SWCTL_SW_DONE_MASK 
+#define DDRC_SWCTL_SW_DONE_DEFVAL                                                  
+#define DDRC_SWCTL_SW_DONE_SHIFT                                                   0
+#define DDRC_SWCTL_SW_DONE_MASK                                                    0x00000001U
+
+/*Burst length expansion mode. By default (i.e. bl_exp_mode==0) XPI expands every AXI burst into multiple HIF commands, using t
+		e memory burst length as a unit. If set to 1, then XPI will use half of the memory burst length as a unit. This applies to bo
+		h reads and writes. When MSTR.data_bus_width==00, setting bl_exp_mode to 1 has no effect. This can be used in cases where Par
+		ial Writes is enabled (UMCTL2_PARTIAL_WR=1) and DBG0.dis_wc=1, in order to avoid or minimize t_ccd_l penalty in DDR4 and t_cc
+		_mw penalty in LPDDR4. Note that if DBICTL.reg_ddrc_dm_en=0, functionality is not supported in the following cases: - UMCTL2_
+		ARTIAL_WR=0 - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=8 and MSTR.reg_ddrc_burst_rdwr=1000 (LP
+		DR4 only) - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=4 and MSTR.reg_ddrc_burst_rdwr=0100 (DDR4
+		only), with either MSTR.reg_ddrc_burstchop=0 or CRCPARCTL1.reg_ddrc_crc_enable=1 Functionality is also not supported if Share
+		-AC is enabled*/
+#undef DDRC_PCCFG_BL_EXP_MODE_DEFVAL 
+#undef DDRC_PCCFG_BL_EXP_MODE_SHIFT 
+#undef DDRC_PCCFG_BL_EXP_MODE_MASK 
+#define DDRC_PCCFG_BL_EXP_MODE_DEFVAL                                              0x00000000
+#define DDRC_PCCFG_BL_EXP_MODE_SHIFT                                               8
+#define DDRC_PCCFG_BL_EXP_MODE_MASK                                                0x00000100U
+
+/*Page match four limit. If set to 1, limits the number of consecutive same page DDRC transactions that can be granted by the P
+		rt Arbiter to four when Page Match feature is enabled. If set to 0, there is no limit imposed on number of consecutive same p
+		ge DDRC transactions.*/
+#undef DDRC_PCCFG_PAGEMATCH_LIMIT_DEFVAL 
+#undef DDRC_PCCFG_PAGEMATCH_LIMIT_SHIFT 
+#undef DDRC_PCCFG_PAGEMATCH_LIMIT_MASK 
+#define DDRC_PCCFG_PAGEMATCH_LIMIT_DEFVAL                                          0x00000000
+#define DDRC_PCCFG_PAGEMATCH_LIMIT_SHIFT                                           4
+#define DDRC_PCCFG_PAGEMATCH_LIMIT_MASK                                            0x00000010U
+
+/*If set to 1 (enabled), sets co_gs_go2critical_wr and co_gs_go2critical_lpr/co_gs_go2critical_hpr signals going to DDRC based 
+		n urgent input (awurgent, arurgent) coming from AXI master. If set to 0 (disabled), co_gs_go2critical_wr and co_gs_go2critica
+		_lpr/co_gs_go2critical_hpr signals at DDRC are driven to 1b'0.*/
+#undef DDRC_PCCFG_GO2CRITICAL_EN_DEFVAL 
+#undef DDRC_PCCFG_GO2CRITICAL_EN_SHIFT 
+#undef DDRC_PCCFG_GO2CRITICAL_EN_MASK 
+#define DDRC_PCCFG_GO2CRITICAL_EN_DEFVAL                                           0x00000000
+#define DDRC_PCCFG_GO2CRITICAL_EN_SHIFT                                            0
+#define DDRC_PCCFG_GO2CRITICAL_EN_MASK                                             0x00000001U
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_0_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_0_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_0_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_0_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_0_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_0_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_0_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_0_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_0_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_0_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_0_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_0_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_0_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_0_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_0_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_0_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_0_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_0_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_0_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_0_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_0_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_0_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_0_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_0_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_0_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_0_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_0_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_0_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_0_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_0_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_0_PORT_EN_MASK 
+#define DDRC_PCTRL_0_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_0_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_0_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_1_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_1_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_1_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_1_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_1_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_1_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_1_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_1_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_1_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_1_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_1_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_1_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_1_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_1_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_1_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_1_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_1_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_1_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_1_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_1_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_1_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_1_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_1_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_1_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_1_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_1_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_1_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_1_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_1_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_1_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_1_PORT_EN_MASK 
+#define DDRC_PCTRL_1_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_1_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_1_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_SHIFT                                     24
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_MASK                                      0x03000000U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_SHIFT                                      8
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_MASK                                       0x00000F00U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_2_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_2_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_2_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_2_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_2_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_2_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_2_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_2_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_2_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_2_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_2_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_2_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_2_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_2_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_2_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_2_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_2_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_2_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_2_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_2_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_2_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_2_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_2_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_2_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_2_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_2_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_2_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_2_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_2_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_2_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_2_PORT_EN_MASK 
+#define DDRC_PCTRL_2_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_2_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_2_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
+		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
+		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_SHIFT                                     24
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_MASK                                      0x03000000U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_DEFVAL                                    0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
+		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
+		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
+		ust be set to distinct values.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_SHIFT                                      8
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_MASK                                       0x00000F00U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_DEFVAL                                     0x02000E00
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_3_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_3_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_3_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_3_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_3_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_3_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_3_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_3_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_3_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_3_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_3_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_3_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_3_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_3_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_3_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_3_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_3_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_3_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_3_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_3_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_3_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_3_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_3_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_3_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_3_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_3_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_3_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_3_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_3_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_3_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_3_PORT_EN_MASK 
+#define DDRC_PCTRL_3_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_3_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_3_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.*/
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_SHIFT                                    20
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_MASK                                     0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.*/
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_SHIFT                                    16
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_MASK                                     0x00030000U
+
+/*Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.*/
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_DEFVAL 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_SHIFT 
+#undef DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_MASK 
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_DEFVAL                                     0x00000000
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_SHIFT                                      0
+#define DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for write transactions.*/
+#undef DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_DEFVAL 
+#undef DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_SHIFT 
+#undef DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_MASK 
+#define DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_DEFVAL                                   
+#define DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_SHIFT                                    0
+#define DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_4_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_4_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_4_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_4_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_4_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_4_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_4_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_4_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_4_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_4_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_4_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_4_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_4_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_4_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_4_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_4_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_4_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_4_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_4_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_4_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_4_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_4_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_4_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_4_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_4_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_4_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_4_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_4_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_4_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_4_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_4_PORT_EN_MASK 
+#define DDRC_PCTRL_4_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_4_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_4_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.*/
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_SHIFT                                    20
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_MASK                                     0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.*/
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_SHIFT                                    16
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_MASK                                     0x00030000U
+
+/*Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.*/
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_DEFVAL 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_SHIFT 
+#undef DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_MASK 
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_DEFVAL                                     0x00000000
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_SHIFT                                      0
+#define DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for write transactions.*/
+#undef DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_DEFVAL 
+#undef DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_SHIFT 
+#undef DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_MASK 
+#define DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_DEFVAL                                   
+#define DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_SHIFT                                    0
+#define DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_MASK                                     0x000007FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_DEFVAL                                   0x00000000
+#define DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
+		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
+		ess handshaking (it is not associated with any particular command).*/
+#undef DDRC_PCFGR_5_RD_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGR_5_RD_PORT_URGENT_EN_DEFVAL                                      0x00000000
+#define DDRC_PCFGR_5_RD_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGR_5_RD_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the read channel of the port.*/
+#undef DDRC_PCFGR_5_RD_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_AGING_EN_MASK 
+#define DDRC_PCFGR_5_RD_PORT_AGING_EN_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_5_RD_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGR_5_RD_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
+		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
+		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
+		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
+		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
+		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
+		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
+		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
+		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
+		he two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGR_5_RD_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGR_5_RD_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGR_5_RD_PORT_PRIORITY_MASK 
+#define DDRC_PCFGR_5_RD_PORT_PRIORITY_DEFVAL                                       0x00000000
+#define DDRC_PCFGR_5_RD_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGR_5_RD_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
+		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
+		imit register.*/
+#undef DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_MASK 
+#define DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_DEFVAL                                   0x00004000
+#define DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_SHIFT                                    14
+#define DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_MASK                                     0x00004000U
+
+/*If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
+		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
+		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
+		not associated with any particular command).*/
+#undef DDRC_PCFGW_5_WR_PORT_URGENT_EN_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_URGENT_EN_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_URGENT_EN_MASK 
+#define DDRC_PCFGW_5_WR_PORT_URGENT_EN_DEFVAL                                      0x00004000
+#define DDRC_PCFGW_5_WR_PORT_URGENT_EN_SHIFT                                       13
+#define DDRC_PCFGW_5_WR_PORT_URGENT_EN_MASK                                        0x00002000U
+
+/*If set to 1, enables aging function for the write channel of the port.*/
+#undef DDRC_PCFGW_5_WR_PORT_AGING_EN_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_AGING_EN_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_AGING_EN_MASK 
+#define DDRC_PCFGW_5_WR_PORT_AGING_EN_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_5_WR_PORT_AGING_EN_SHIFT                                        12
+#define DDRC_PCFGW_5_WR_PORT_AGING_EN_MASK                                         0x00001000U
+
+/*Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
+		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
+		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
+		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
+		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
+		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
+		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
+		ng. Note: The two LSBs of this register field are tied internally to 2'b00.*/
+#undef DDRC_PCFGW_5_WR_PORT_PRIORITY_DEFVAL 
+#undef DDRC_PCFGW_5_WR_PORT_PRIORITY_SHIFT 
+#undef DDRC_PCFGW_5_WR_PORT_PRIORITY_MASK 
+#define DDRC_PCFGW_5_WR_PORT_PRIORITY_DEFVAL                                       0x00004000
+#define DDRC_PCFGW_5_WR_PORT_PRIORITY_SHIFT                                        0
+#define DDRC_PCFGW_5_WR_PORT_PRIORITY_MASK                                         0x000003FFU
+
+/*Enables port n.*/
+#undef DDRC_PCTRL_5_PORT_EN_DEFVAL 
+#undef DDRC_PCTRL_5_PORT_EN_SHIFT 
+#undef DDRC_PCTRL_5_PORT_EN_MASK 
+#define DDRC_PCTRL_5_PORT_EN_DEFVAL                                                
+#define DDRC_PCTRL_5_PORT_EN_SHIFT                                                 0
+#define DDRC_PCTRL_5_PORT_EN_MASK                                                  0x00000001U
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
+		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
+		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_SHIFT                                     20
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_MASK                                      0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
+		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
+		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.*/
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_DEFVAL                                    0x00000000
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_SHIFT                                     16
+#define DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_MASK                                      0x00030000U
+
+/*Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
+		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
+		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
+		 values.*/
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_DEFVAL 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_SHIFT 
+#undef DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_MASK 
+#define DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_DEFVAL                                     0x00000000
+#define DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_SHIFT                                      0
+#define DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for transactions mapped to the red address queue.*/
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_DEFVAL 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_SHIFT 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_MASK 
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_SHIFT                                    16
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_MASK                                     0x07FF0000U
+
+/*Specifies the timeout value for transactions mapped to the blue address queue.*/
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_DEFVAL 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_SHIFT 
+#undef DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_MASK 
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_DEFVAL                                   0x00000000
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_SHIFT                                    0
+#define DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_MASK                                     0x000007FFU
+
+/*This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.*/
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_DEFVAL 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_SHIFT 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_MASK 
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_SHIFT                                    20
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_MASK                                     0x00300000U
+
+/*This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
+		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.*/
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_DEFVAL 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_SHIFT 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_MASK 
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_DEFVAL                                   0x00000000
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_SHIFT                                    16
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_MASK                                     0x00030000U
+
+/*Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
+		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
+		s to higher port priority.*/
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_DEFVAL 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_SHIFT 
+#undef DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_MASK 
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_DEFVAL                                     0x00000000
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_SHIFT                                      0
+#define DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_MASK                                       0x0000000FU
+
+/*Specifies the timeout value for write transactions.*/
+#undef DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_DEFVAL 
+#undef DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_SHIFT 
+#undef DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_MASK 
+#define DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_DEFVAL                                   
+#define DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_SHIFT                                    0
+#define DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_MASK                                     0x000007FFU
+
+/*Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).*/
+#undef DDRC_SARBASE0_BASE_ADDR_DEFVAL 
+#undef DDRC_SARBASE0_BASE_ADDR_SHIFT 
+#undef DDRC_SARBASE0_BASE_ADDR_MASK 
+#define DDRC_SARBASE0_BASE_ADDR_DEFVAL                                             
+#define DDRC_SARBASE0_BASE_ADDR_SHIFT                                              0
+#define DDRC_SARBASE0_BASE_ADDR_MASK                                               0x000001FFU
+
+/*Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.*/
+#undef DDRC_SARSIZE0_NBLOCKS_DEFVAL 
+#undef DDRC_SARSIZE0_NBLOCKS_SHIFT 
+#undef DDRC_SARSIZE0_NBLOCKS_MASK 
+#define DDRC_SARSIZE0_NBLOCKS_DEFVAL                                               
+#define DDRC_SARSIZE0_NBLOCKS_SHIFT                                                0
+#define DDRC_SARSIZE0_NBLOCKS_MASK                                                 0x000000FFU
+
+/*Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
+		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).*/
+#undef DDRC_SARBASE1_BASE_ADDR_DEFVAL 
+#undef DDRC_SARBASE1_BASE_ADDR_SHIFT 
+#undef DDRC_SARBASE1_BASE_ADDR_MASK 
+#define DDRC_SARBASE1_BASE_ADDR_DEFVAL                                             
+#define DDRC_SARBASE1_BASE_ADDR_SHIFT                                              0
+#define DDRC_SARBASE1_BASE_ADDR_MASK                                               0x000001FFU
+
+/*Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
+		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
+		or example, if register is programmed to 0, region will have 1 block.*/
+#undef DDRC_SARSIZE1_NBLOCKS_DEFVAL 
+#undef DDRC_SARSIZE1_NBLOCKS_SHIFT 
+#undef DDRC_SARSIZE1_NBLOCKS_MASK 
+#define DDRC_SARSIZE1_NBLOCKS_DEFVAL                                               
+#define DDRC_SARSIZE1_NBLOCKS_SHIFT                                                0
+#define DDRC_SARSIZE1_NBLOCKS_MASK                                                 0x000000FFU
+
+/*Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
+		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
+		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
+		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_DEFVAL                                0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_SHIFT                                 24
+#define DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_MASK                                  0x1F000000U
+
+/*Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
+		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
+		fer to PHY specification for correct value.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_DEFVAL                              0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_SHIFT                               23
+#define DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_MASK                                0x00800000U
+
+/*Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
+		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
+		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
+		 latency through the RDIMM. Unit: Clocks*/
+#undef DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_DEFVAL                                 0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_SHIFT                                  16
+#define DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_MASK                                   0x003F0000U
+
+/*Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
+		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
+		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
+		e.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_DEFVAL                              0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_SHIFT                               15
+#define DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_MASK                                0x00008000U
+
+/*Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
+		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
+		te, max supported value is 8. Unit: Clocks*/
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_DEFVAL                                 0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_SHIFT                                  8
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_MASK                                   0x00003F00U
+
+/*Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
+		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
+		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
+		rough the RDIMM.*/
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_DEFVAL 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_SHIFT 
+#undef DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_MASK 
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_DEFVAL                                  0x07020002
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_SHIFT                                   0
+#define DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_MASK                                    0x0000003FU
+
+/*DDR block level reset inside of the DDR Sub System*/
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT 
+#undef CRF_APB_RST_DDR_SS_DDR_RESET_MASK 
+#define CRF_APB_RST_DDR_SS_DDR_RESET_DEFVAL                                        0x0000000F
+#define CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT                                         3
+#define CRF_APB_RST_DDR_SS_DDR_RESET_MASK                                          0x00000008U
+
+/*Address Copy*/
+#undef DDR_PHY_PGCR0_ADCP_DEFVAL 
+#undef DDR_PHY_PGCR0_ADCP_SHIFT 
+#undef DDR_PHY_PGCR0_ADCP_MASK 
+#define DDR_PHY_PGCR0_ADCP_DEFVAL                                                  0x07001E00
+#define DDR_PHY_PGCR0_ADCP_SHIFT                                                   31
+#define DDR_PHY_PGCR0_ADCP_MASK                                                    0x80000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_30_27_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_30_27_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_30_27_MASK 
+#define DDR_PHY_PGCR0_RESERVED_30_27_DEFVAL                                        0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_30_27_SHIFT                                         27
+#define DDR_PHY_PGCR0_RESERVED_30_27_MASK                                          0x78000000U
+
+/*PHY FIFO Reset*/
+#undef DDR_PHY_PGCR0_PHYFRST_DEFVAL 
+#undef DDR_PHY_PGCR0_PHYFRST_SHIFT 
+#undef DDR_PHY_PGCR0_PHYFRST_MASK 
+#define DDR_PHY_PGCR0_PHYFRST_DEFVAL                                               0x07001E00
+#define DDR_PHY_PGCR0_PHYFRST_SHIFT                                                26
+#define DDR_PHY_PGCR0_PHYFRST_MASK                                                 0x04000000U
+
+/*Oscillator Mode Address/Command Delay Line Select*/
+#undef DDR_PHY_PGCR0_OSCACDL_DEFVAL 
+#undef DDR_PHY_PGCR0_OSCACDL_SHIFT 
+#undef DDR_PHY_PGCR0_OSCACDL_MASK 
+#define DDR_PHY_PGCR0_OSCACDL_DEFVAL                                               0x07001E00
+#define DDR_PHY_PGCR0_OSCACDL_SHIFT                                                24
+#define DDR_PHY_PGCR0_OSCACDL_MASK                                                 0x03000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_23_19_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_23_19_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_23_19_MASK 
+#define DDR_PHY_PGCR0_RESERVED_23_19_DEFVAL                                        0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_23_19_SHIFT                                         19
+#define DDR_PHY_PGCR0_RESERVED_23_19_MASK                                          0x00F80000U
+
+/*Digital Test Output Select*/
+#undef DDR_PHY_PGCR0_DTOSEL_DEFVAL 
+#undef DDR_PHY_PGCR0_DTOSEL_SHIFT 
+#undef DDR_PHY_PGCR0_DTOSEL_MASK 
+#define DDR_PHY_PGCR0_DTOSEL_DEFVAL                                                0x07001E00
+#define DDR_PHY_PGCR0_DTOSEL_SHIFT                                                 14
+#define DDR_PHY_PGCR0_DTOSEL_MASK                                                  0x0007C000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_13_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_13_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_13_MASK 
+#define DDR_PHY_PGCR0_RESERVED_13_DEFVAL                                           0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_13_SHIFT                                            13
+#define DDR_PHY_PGCR0_RESERVED_13_MASK                                             0x00002000U
+
+/*Oscillator Mode Division*/
+#undef DDR_PHY_PGCR0_OSCDIV_DEFVAL 
+#undef DDR_PHY_PGCR0_OSCDIV_SHIFT 
+#undef DDR_PHY_PGCR0_OSCDIV_MASK 
+#define DDR_PHY_PGCR0_OSCDIV_DEFVAL                                                0x07001E00
+#define DDR_PHY_PGCR0_OSCDIV_SHIFT                                                 9
+#define DDR_PHY_PGCR0_OSCDIV_MASK                                                  0x00001E00U
+
+/*Oscillator Enable*/
+#undef DDR_PHY_PGCR0_OSCEN_DEFVAL 
+#undef DDR_PHY_PGCR0_OSCEN_SHIFT 
+#undef DDR_PHY_PGCR0_OSCEN_MASK 
+#define DDR_PHY_PGCR0_OSCEN_DEFVAL                                                 0x07001E00
+#define DDR_PHY_PGCR0_OSCEN_SHIFT                                                  8
+#define DDR_PHY_PGCR0_OSCEN_MASK                                                   0x00000100U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PGCR0_RESERVED_7_0_DEFVAL 
+#undef DDR_PHY_PGCR0_RESERVED_7_0_SHIFT 
+#undef DDR_PHY_PGCR0_RESERVED_7_0_MASK 
+#define DDR_PHY_PGCR0_RESERVED_7_0_DEFVAL                                          0x07001E00
+#define DDR_PHY_PGCR0_RESERVED_7_0_SHIFT                                           0
+#define DDR_PHY_PGCR0_RESERVED_7_0_MASK                                            0x000000FFU
+
+/*Clear Training Status Registers*/
+#undef DDR_PHY_PGCR2_CLRTSTAT_DEFVAL 
+#undef DDR_PHY_PGCR2_CLRTSTAT_SHIFT 
+#undef DDR_PHY_PGCR2_CLRTSTAT_MASK 
+#define DDR_PHY_PGCR2_CLRTSTAT_DEFVAL                                              0x00F12480
+#define DDR_PHY_PGCR2_CLRTSTAT_SHIFT                                               31
+#define DDR_PHY_PGCR2_CLRTSTAT_MASK                                                0x80000000U
+
+/*Clear Impedance Calibration*/
+#undef DDR_PHY_PGCR2_CLRZCAL_DEFVAL 
+#undef DDR_PHY_PGCR2_CLRZCAL_SHIFT 
+#undef DDR_PHY_PGCR2_CLRZCAL_MASK 
+#define DDR_PHY_PGCR2_CLRZCAL_DEFVAL                                               0x00F12480
+#define DDR_PHY_PGCR2_CLRZCAL_SHIFT                                                30
+#define DDR_PHY_PGCR2_CLRZCAL_MASK                                                 0x40000000U
+
+/*Clear Parity Error*/
+#undef DDR_PHY_PGCR2_CLRPERR_DEFVAL 
+#undef DDR_PHY_PGCR2_CLRPERR_SHIFT 
+#undef DDR_PHY_PGCR2_CLRPERR_MASK 
+#define DDR_PHY_PGCR2_CLRPERR_DEFVAL                                               0x00F12480
+#define DDR_PHY_PGCR2_CLRPERR_SHIFT                                                29
+#define DDR_PHY_PGCR2_CLRPERR_MASK                                                 0x20000000U
+
+/*Initialization Complete Pin Configuration*/
+#undef DDR_PHY_PGCR2_ICPC_DEFVAL 
+#undef DDR_PHY_PGCR2_ICPC_SHIFT 
+#undef DDR_PHY_PGCR2_ICPC_MASK 
+#define DDR_PHY_PGCR2_ICPC_DEFVAL                                                  0x00F12480
+#define DDR_PHY_PGCR2_ICPC_SHIFT                                                   28
+#define DDR_PHY_PGCR2_ICPC_MASK                                                    0x10000000U
+
+/*Data Training PUB Mode Exit Timer*/
+#undef DDR_PHY_PGCR2_DTPMXTMR_DEFVAL 
+#undef DDR_PHY_PGCR2_DTPMXTMR_SHIFT 
+#undef DDR_PHY_PGCR2_DTPMXTMR_MASK 
+#define DDR_PHY_PGCR2_DTPMXTMR_DEFVAL                                              0x00F12480
+#define DDR_PHY_PGCR2_DTPMXTMR_SHIFT                                               20
+#define DDR_PHY_PGCR2_DTPMXTMR_MASK                                                0x0FF00000U
+
+/*Initialization Bypass*/
+#undef DDR_PHY_PGCR2_INITFSMBYP_DEFVAL 
+#undef DDR_PHY_PGCR2_INITFSMBYP_SHIFT 
+#undef DDR_PHY_PGCR2_INITFSMBYP_MASK 
+#define DDR_PHY_PGCR2_INITFSMBYP_DEFVAL                                            0x00F12480
+#define DDR_PHY_PGCR2_INITFSMBYP_SHIFT                                             19
+#define DDR_PHY_PGCR2_INITFSMBYP_MASK                                              0x00080000U
+
+/*PLL FSM Bypass*/
+#undef DDR_PHY_PGCR2_PLLFSMBYP_DEFVAL 
+#undef DDR_PHY_PGCR2_PLLFSMBYP_SHIFT 
+#undef DDR_PHY_PGCR2_PLLFSMBYP_MASK 
+#define DDR_PHY_PGCR2_PLLFSMBYP_DEFVAL                                             0x00F12480
+#define DDR_PHY_PGCR2_PLLFSMBYP_SHIFT                                              18
+#define DDR_PHY_PGCR2_PLLFSMBYP_MASK                                               0x00040000U
+
+/*Refresh Period*/
+#undef DDR_PHY_PGCR2_TREFPRD_DEFVAL 
+#undef DDR_PHY_PGCR2_TREFPRD_SHIFT 
+#undef DDR_PHY_PGCR2_TREFPRD_MASK 
+#define DDR_PHY_PGCR2_TREFPRD_DEFVAL                                               0x00F12480
+#define DDR_PHY_PGCR2_TREFPRD_SHIFT                                                0
+#define DDR_PHY_PGCR2_TREFPRD_MASK                                                 0x0003FFFFU
+
+/*Frequency B Ratio Term*/
+#undef DDR_PHY_PGCR5_FRQBT_DEFVAL 
+#undef DDR_PHY_PGCR5_FRQBT_SHIFT 
+#undef DDR_PHY_PGCR5_FRQBT_MASK 
+#define DDR_PHY_PGCR5_FRQBT_DEFVAL                                                 0x01010000
+#define DDR_PHY_PGCR5_FRQBT_SHIFT                                                  24
+#define DDR_PHY_PGCR5_FRQBT_MASK                                                   0xFF000000U
+
+/*Frequency A Ratio Term*/
+#undef DDR_PHY_PGCR5_FRQAT_DEFVAL 
+#undef DDR_PHY_PGCR5_FRQAT_SHIFT 
+#undef DDR_PHY_PGCR5_FRQAT_MASK 
+#define DDR_PHY_PGCR5_FRQAT_DEFVAL                                                 0x01010000
+#define DDR_PHY_PGCR5_FRQAT_SHIFT                                                  16
+#define DDR_PHY_PGCR5_FRQAT_MASK                                                   0x00FF0000U
+
+/*DFI Disconnect Time Period*/
+#undef DDR_PHY_PGCR5_DISCNPERIOD_DEFVAL 
+#undef DDR_PHY_PGCR5_DISCNPERIOD_SHIFT 
+#undef DDR_PHY_PGCR5_DISCNPERIOD_MASK 
+#define DDR_PHY_PGCR5_DISCNPERIOD_DEFVAL                                           0x01010000
+#define DDR_PHY_PGCR5_DISCNPERIOD_SHIFT                                            8
+#define DDR_PHY_PGCR5_DISCNPERIOD_MASK                                             0x0000FF00U
+
+/*Receiver bias core side control*/
+#undef DDR_PHY_PGCR5_VREF_RBCTRL_DEFVAL 
+#undef DDR_PHY_PGCR5_VREF_RBCTRL_SHIFT 
+#undef DDR_PHY_PGCR5_VREF_RBCTRL_MASK 
+#define DDR_PHY_PGCR5_VREF_RBCTRL_DEFVAL                                           0x01010000
+#define DDR_PHY_PGCR5_VREF_RBCTRL_SHIFT                                            4
+#define DDR_PHY_PGCR5_VREF_RBCTRL_MASK                                             0x000000F0U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PGCR5_RESERVED_3_DEFVAL 
+#undef DDR_PHY_PGCR5_RESERVED_3_SHIFT 
+#undef DDR_PHY_PGCR5_RESERVED_3_MASK 
+#define DDR_PHY_PGCR5_RESERVED_3_DEFVAL                                            0x01010000
+#define DDR_PHY_PGCR5_RESERVED_3_SHIFT                                             3
+#define DDR_PHY_PGCR5_RESERVED_3_MASK                                              0x00000008U
+
+/*Internal VREF generator REFSEL ragne select*/
+#undef DDR_PHY_PGCR5_DXREFISELRANGE_DEFVAL 
+#undef DDR_PHY_PGCR5_DXREFISELRANGE_SHIFT 
+#undef DDR_PHY_PGCR5_DXREFISELRANGE_MASK 
+#define DDR_PHY_PGCR5_DXREFISELRANGE_DEFVAL                                        0x01010000
+#define DDR_PHY_PGCR5_DXREFISELRANGE_SHIFT                                         2
+#define DDR_PHY_PGCR5_DXREFISELRANGE_MASK                                          0x00000004U
+
+/*DDL Page Read Write select*/
+#undef DDR_PHY_PGCR5_DDLPGACT_DEFVAL 
+#undef DDR_PHY_PGCR5_DDLPGACT_SHIFT 
+#undef DDR_PHY_PGCR5_DDLPGACT_MASK 
+#define DDR_PHY_PGCR5_DDLPGACT_DEFVAL                                              0x01010000
+#define DDR_PHY_PGCR5_DDLPGACT_SHIFT                                               1
+#define DDR_PHY_PGCR5_DDLPGACT_MASK                                                0x00000002U
+
+/*DDL Page Read Write select*/
+#undef DDR_PHY_PGCR5_DDLPGRW_DEFVAL 
+#undef DDR_PHY_PGCR5_DDLPGRW_SHIFT 
+#undef DDR_PHY_PGCR5_DDLPGRW_MASK 
+#define DDR_PHY_PGCR5_DDLPGRW_DEFVAL                                               0x01010000
+#define DDR_PHY_PGCR5_DDLPGRW_SHIFT                                                0
+#define DDR_PHY_PGCR5_DDLPGRW_MASK                                                 0x00000001U
+
+/*PLL Power-Down Time*/
+#undef DDR_PHY_PTR0_TPLLPD_DEFVAL 
+#undef DDR_PHY_PTR0_TPLLPD_SHIFT 
+#undef DDR_PHY_PTR0_TPLLPD_MASK 
+#define DDR_PHY_PTR0_TPLLPD_DEFVAL                                                 0x42C21590
+#define DDR_PHY_PTR0_TPLLPD_SHIFT                                                  21
+#define DDR_PHY_PTR0_TPLLPD_MASK                                                   0xFFE00000U
+
+/*PLL Gear Shift Time*/
+#undef DDR_PHY_PTR0_TPLLGS_DEFVAL 
+#undef DDR_PHY_PTR0_TPLLGS_SHIFT 
+#undef DDR_PHY_PTR0_TPLLGS_MASK 
+#define DDR_PHY_PTR0_TPLLGS_DEFVAL                                                 0x42C21590
+#define DDR_PHY_PTR0_TPLLGS_SHIFT                                                  6
+#define DDR_PHY_PTR0_TPLLGS_MASK                                                   0x001FFFC0U
+
+/*PHY Reset Time*/
+#undef DDR_PHY_PTR0_TPHYRST_DEFVAL 
+#undef DDR_PHY_PTR0_TPHYRST_SHIFT 
+#undef DDR_PHY_PTR0_TPHYRST_MASK 
+#define DDR_PHY_PTR0_TPHYRST_DEFVAL                                                0x42C21590
+#define DDR_PHY_PTR0_TPHYRST_SHIFT                                                 0
+#define DDR_PHY_PTR0_TPHYRST_MASK                                                  0x0000003FU
+
+/*PLL Lock Time*/
+#undef DDR_PHY_PTR1_TPLLLOCK_DEFVAL 
+#undef DDR_PHY_PTR1_TPLLLOCK_SHIFT 
+#undef DDR_PHY_PTR1_TPLLLOCK_MASK 
+#define DDR_PHY_PTR1_TPLLLOCK_DEFVAL                                               0xD05612C0
+#define DDR_PHY_PTR1_TPLLLOCK_SHIFT                                                16
+#define DDR_PHY_PTR1_TPLLLOCK_MASK                                                 0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_PTR1_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_PTR1_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_PTR1_RESERVED_15_13_MASK 
+#define DDR_PHY_PTR1_RESERVED_15_13_DEFVAL                                         0xD05612C0
+#define DDR_PHY_PTR1_RESERVED_15_13_SHIFT                                          13
+#define DDR_PHY_PTR1_RESERVED_15_13_MASK                                           0x0000E000U
+
+/*PLL Reset Time*/
+#undef DDR_PHY_PTR1_TPLLRST_DEFVAL 
+#undef DDR_PHY_PTR1_TPLLRST_SHIFT 
+#undef DDR_PHY_PTR1_TPLLRST_MASK 
+#define DDR_PHY_PTR1_TPLLRST_DEFVAL                                                0xD05612C0
+#define DDR_PHY_PTR1_TPLLRST_SHIFT                                                 0
+#define DDR_PHY_PTR1_TPLLRST_MASK                                                  0x00001FFFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DSGCR_RESERVED_31_28_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_31_28_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_31_28_MASK 
+#define DDR_PHY_DSGCR_RESERVED_31_28_DEFVAL                                        0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_31_28_SHIFT                                         28
+#define DDR_PHY_DSGCR_RESERVED_31_28_MASK                                          0xF0000000U
+
+/*When RDBI enabled, this bit is used to select RDBI CL calculation, if it is 1b1, calculation will use RDBICL, otherwise use d
+		fault calculation.*/
+#undef DDR_PHY_DSGCR_RDBICLSEL_DEFVAL 
+#undef DDR_PHY_DSGCR_RDBICLSEL_SHIFT 
+#undef DDR_PHY_DSGCR_RDBICLSEL_MASK 
+#define DDR_PHY_DSGCR_RDBICLSEL_DEFVAL                                             0x02A04101
+#define DDR_PHY_DSGCR_RDBICLSEL_SHIFT                                              27
+#define DDR_PHY_DSGCR_RDBICLSEL_MASK                                               0x08000000U
+
+/*When RDBI enabled, if RDBICLSEL is asserted, RDBI CL adjust using this value.*/
+#undef DDR_PHY_DSGCR_RDBICL_DEFVAL 
+#undef DDR_PHY_DSGCR_RDBICL_SHIFT 
+#undef DDR_PHY_DSGCR_RDBICL_MASK 
+#define DDR_PHY_DSGCR_RDBICL_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_RDBICL_SHIFT                                                 24
+#define DDR_PHY_DSGCR_RDBICL_MASK                                                  0x07000000U
+
+/*PHY Impedance Update Enable*/
+#undef DDR_PHY_DSGCR_PHYZUEN_DEFVAL 
+#undef DDR_PHY_DSGCR_PHYZUEN_SHIFT 
+#undef DDR_PHY_DSGCR_PHYZUEN_MASK 
+#define DDR_PHY_DSGCR_PHYZUEN_DEFVAL                                               0x02A04101
+#define DDR_PHY_DSGCR_PHYZUEN_SHIFT                                                23
+#define DDR_PHY_DSGCR_PHYZUEN_MASK                                                 0x00800000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DSGCR_RESERVED_22_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_22_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_22_MASK 
+#define DDR_PHY_DSGCR_RESERVED_22_DEFVAL                                           0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_22_SHIFT                                            22
+#define DDR_PHY_DSGCR_RESERVED_22_MASK                                             0x00400000U
+
+/*SDRAM Reset Output Enable*/
+#undef DDR_PHY_DSGCR_RSTOE_DEFVAL 
+#undef DDR_PHY_DSGCR_RSTOE_SHIFT 
+#undef DDR_PHY_DSGCR_RSTOE_MASK 
+#define DDR_PHY_DSGCR_RSTOE_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_RSTOE_SHIFT                                                  21
+#define DDR_PHY_DSGCR_RSTOE_MASK                                                   0x00200000U
+
+/*Single Data Rate Mode*/
+#undef DDR_PHY_DSGCR_SDRMODE_DEFVAL 
+#undef DDR_PHY_DSGCR_SDRMODE_SHIFT 
+#undef DDR_PHY_DSGCR_SDRMODE_MASK 
+#define DDR_PHY_DSGCR_SDRMODE_DEFVAL                                               0x02A04101
+#define DDR_PHY_DSGCR_SDRMODE_SHIFT                                                19
+#define DDR_PHY_DSGCR_SDRMODE_MASK                                                 0x00180000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DSGCR_RESERVED_18_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_18_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_18_MASK 
+#define DDR_PHY_DSGCR_RESERVED_18_DEFVAL                                           0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_18_SHIFT                                            18
+#define DDR_PHY_DSGCR_RESERVED_18_MASK                                             0x00040000U
+
+/*ATO Analog Test Enable*/
+#undef DDR_PHY_DSGCR_ATOAE_DEFVAL 
+#undef DDR_PHY_DSGCR_ATOAE_SHIFT 
+#undef DDR_PHY_DSGCR_ATOAE_MASK 
+#define DDR_PHY_DSGCR_ATOAE_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_ATOAE_SHIFT                                                  17
+#define DDR_PHY_DSGCR_ATOAE_MASK                                                   0x00020000U
+
+/*DTO Output Enable*/
+#undef DDR_PHY_DSGCR_DTOOE_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOOE_SHIFT 
+#undef DDR_PHY_DSGCR_DTOOE_MASK 
+#define DDR_PHY_DSGCR_DTOOE_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_DTOOE_SHIFT                                                  16
+#define DDR_PHY_DSGCR_DTOOE_MASK                                                   0x00010000U
+
+/*DTO I/O Mode*/
+#undef DDR_PHY_DSGCR_DTOIOM_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOIOM_SHIFT 
+#undef DDR_PHY_DSGCR_DTOIOM_MASK 
+#define DDR_PHY_DSGCR_DTOIOM_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_DTOIOM_SHIFT                                                 15
+#define DDR_PHY_DSGCR_DTOIOM_MASK                                                  0x00008000U
+
+/*DTO Power Down Receiver*/
+#undef DDR_PHY_DSGCR_DTOPDR_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOPDR_SHIFT 
+#undef DDR_PHY_DSGCR_DTOPDR_MASK 
+#define DDR_PHY_DSGCR_DTOPDR_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_DTOPDR_SHIFT                                                 14
+#define DDR_PHY_DSGCR_DTOPDR_MASK                                                  0x00004000U
+
+/*Reserved. Return zeroes on reads*/
+#undef DDR_PHY_DSGCR_RESERVED_13_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_13_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_13_MASK 
+#define DDR_PHY_DSGCR_RESERVED_13_DEFVAL                                           0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_13_SHIFT                                            13
+#define DDR_PHY_DSGCR_RESERVED_13_MASK                                             0x00002000U
+
+/*DTO On-Die Termination*/
+#undef DDR_PHY_DSGCR_DTOODT_DEFVAL 
+#undef DDR_PHY_DSGCR_DTOODT_SHIFT 
+#undef DDR_PHY_DSGCR_DTOODT_MASK 
+#define DDR_PHY_DSGCR_DTOODT_DEFVAL                                                0x02A04101
+#define DDR_PHY_DSGCR_DTOODT_SHIFT                                                 12
+#define DDR_PHY_DSGCR_DTOODT_MASK                                                  0x00001000U
+
+/*PHY Update Acknowledge Delay*/
+#undef DDR_PHY_DSGCR_PUAD_DEFVAL 
+#undef DDR_PHY_DSGCR_PUAD_SHIFT 
+#undef DDR_PHY_DSGCR_PUAD_MASK 
+#define DDR_PHY_DSGCR_PUAD_DEFVAL                                                  0x02A04101
+#define DDR_PHY_DSGCR_PUAD_SHIFT                                                   6
+#define DDR_PHY_DSGCR_PUAD_MASK                                                    0x00000FC0U
+
+/*Controller Update Acknowledge Enable*/
+#undef DDR_PHY_DSGCR_CUAEN_DEFVAL 
+#undef DDR_PHY_DSGCR_CUAEN_SHIFT 
+#undef DDR_PHY_DSGCR_CUAEN_MASK 
+#define DDR_PHY_DSGCR_CUAEN_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_CUAEN_SHIFT                                                  5
+#define DDR_PHY_DSGCR_CUAEN_MASK                                                   0x00000020U
+
+/*Reserved. Return zeroes on reads*/
+#undef DDR_PHY_DSGCR_RESERVED_4_3_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_4_3_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_4_3_MASK 
+#define DDR_PHY_DSGCR_RESERVED_4_3_DEFVAL                                          0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_4_3_SHIFT                                           3
+#define DDR_PHY_DSGCR_RESERVED_4_3_MASK                                            0x00000018U
+
+/*Controller Impedance Update Enable*/
+#undef DDR_PHY_DSGCR_CTLZUEN_DEFVAL 
+#undef DDR_PHY_DSGCR_CTLZUEN_SHIFT 
+#undef DDR_PHY_DSGCR_CTLZUEN_MASK 
+#define DDR_PHY_DSGCR_CTLZUEN_DEFVAL                                               0x02A04101
+#define DDR_PHY_DSGCR_CTLZUEN_SHIFT                                                2
+#define DDR_PHY_DSGCR_CTLZUEN_MASK                                                 0x00000004U
+
+/*Reserved. Return zeroes on reads*/
+#undef DDR_PHY_DSGCR_RESERVED_1_DEFVAL 
+#undef DDR_PHY_DSGCR_RESERVED_1_SHIFT 
+#undef DDR_PHY_DSGCR_RESERVED_1_MASK 
+#define DDR_PHY_DSGCR_RESERVED_1_DEFVAL                                            0x02A04101
+#define DDR_PHY_DSGCR_RESERVED_1_SHIFT                                             1
+#define DDR_PHY_DSGCR_RESERVED_1_MASK                                              0x00000002U
+
+/*PHY Update Request Enable*/
+#undef DDR_PHY_DSGCR_PUREN_DEFVAL 
+#undef DDR_PHY_DSGCR_PUREN_SHIFT 
+#undef DDR_PHY_DSGCR_PUREN_MASK 
+#define DDR_PHY_DSGCR_PUREN_DEFVAL                                                 0x02A04101
+#define DDR_PHY_DSGCR_PUREN_SHIFT                                                  0
+#define DDR_PHY_DSGCR_PUREN_MASK                                                   0x00000001U
+
+/*DDR4 Gear Down Timing.*/
+#undef DDR_PHY_DCR_GEARDN_DEFVAL 
+#undef DDR_PHY_DCR_GEARDN_SHIFT 
+#undef DDR_PHY_DCR_GEARDN_MASK 
+#define DDR_PHY_DCR_GEARDN_DEFVAL                                                  0x0000040D
+#define DDR_PHY_DCR_GEARDN_SHIFT                                                   31
+#define DDR_PHY_DCR_GEARDN_MASK                                                    0x80000000U
+
+/*Un-used Bank Group*/
+#undef DDR_PHY_DCR_UBG_DEFVAL 
+#undef DDR_PHY_DCR_UBG_SHIFT 
+#undef DDR_PHY_DCR_UBG_MASK 
+#define DDR_PHY_DCR_UBG_DEFVAL                                                     0x0000040D
+#define DDR_PHY_DCR_UBG_SHIFT                                                      30
+#define DDR_PHY_DCR_UBG_MASK                                                       0x40000000U
+
+/*Un-buffered DIMM Address Mirroring*/
+#undef DDR_PHY_DCR_UDIMM_DEFVAL 
+#undef DDR_PHY_DCR_UDIMM_SHIFT 
+#undef DDR_PHY_DCR_UDIMM_MASK 
+#define DDR_PHY_DCR_UDIMM_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_UDIMM_SHIFT                                                    29
+#define DDR_PHY_DCR_UDIMM_MASK                                                     0x20000000U
+
+/*DDR 2T Timing*/
+#undef DDR_PHY_DCR_DDR2T_DEFVAL 
+#undef DDR_PHY_DCR_DDR2T_SHIFT 
+#undef DDR_PHY_DCR_DDR2T_MASK 
+#define DDR_PHY_DCR_DDR2T_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_DDR2T_SHIFT                                                    28
+#define DDR_PHY_DCR_DDR2T_MASK                                                     0x10000000U
+
+/*No Simultaneous Rank Access*/
+#undef DDR_PHY_DCR_NOSRA_DEFVAL 
+#undef DDR_PHY_DCR_NOSRA_SHIFT 
+#undef DDR_PHY_DCR_NOSRA_MASK 
+#define DDR_PHY_DCR_NOSRA_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_NOSRA_SHIFT                                                    27
+#define DDR_PHY_DCR_NOSRA_MASK                                                     0x08000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DCR_RESERVED_26_18_DEFVAL 
+#undef DDR_PHY_DCR_RESERVED_26_18_SHIFT 
+#undef DDR_PHY_DCR_RESERVED_26_18_MASK 
+#define DDR_PHY_DCR_RESERVED_26_18_DEFVAL                                          0x0000040D
+#define DDR_PHY_DCR_RESERVED_26_18_SHIFT                                           18
+#define DDR_PHY_DCR_RESERVED_26_18_MASK                                            0x07FC0000U
+
+/*Byte Mask*/
+#undef DDR_PHY_DCR_BYTEMASK_DEFVAL 
+#undef DDR_PHY_DCR_BYTEMASK_SHIFT 
+#undef DDR_PHY_DCR_BYTEMASK_MASK 
+#define DDR_PHY_DCR_BYTEMASK_DEFVAL                                                0x0000040D
+#define DDR_PHY_DCR_BYTEMASK_SHIFT                                                 10
+#define DDR_PHY_DCR_BYTEMASK_MASK                                                  0x0003FC00U
+
+/*DDR Type*/
+#undef DDR_PHY_DCR_DDRTYPE_DEFVAL 
+#undef DDR_PHY_DCR_DDRTYPE_SHIFT 
+#undef DDR_PHY_DCR_DDRTYPE_MASK 
+#define DDR_PHY_DCR_DDRTYPE_DEFVAL                                                 0x0000040D
+#define DDR_PHY_DCR_DDRTYPE_SHIFT                                                  8
+#define DDR_PHY_DCR_DDRTYPE_MASK                                                   0x00000300U
+
+/*Multi-Purpose Register (MPR) DQ (DDR3 Only)*/
+#undef DDR_PHY_DCR_MPRDQ_DEFVAL 
+#undef DDR_PHY_DCR_MPRDQ_SHIFT 
+#undef DDR_PHY_DCR_MPRDQ_MASK 
+#define DDR_PHY_DCR_MPRDQ_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_MPRDQ_SHIFT                                                    7
+#define DDR_PHY_DCR_MPRDQ_MASK                                                     0x00000080U
+
+/*Primary DQ (DDR3 Only)*/
+#undef DDR_PHY_DCR_PDQ_DEFVAL 
+#undef DDR_PHY_DCR_PDQ_SHIFT 
+#undef DDR_PHY_DCR_PDQ_MASK 
+#define DDR_PHY_DCR_PDQ_DEFVAL                                                     0x0000040D
+#define DDR_PHY_DCR_PDQ_SHIFT                                                      4
+#define DDR_PHY_DCR_PDQ_MASK                                                       0x00000070U
+
+/*DDR 8-Bank*/
+#undef DDR_PHY_DCR_DDR8BNK_DEFVAL 
+#undef DDR_PHY_DCR_DDR8BNK_SHIFT 
+#undef DDR_PHY_DCR_DDR8BNK_MASK 
+#define DDR_PHY_DCR_DDR8BNK_DEFVAL                                                 0x0000040D
+#define DDR_PHY_DCR_DDR8BNK_SHIFT                                                  3
+#define DDR_PHY_DCR_DDR8BNK_MASK                                                   0x00000008U
+
+/*DDR Mode*/
+#undef DDR_PHY_DCR_DDRMD_DEFVAL 
+#undef DDR_PHY_DCR_DDRMD_SHIFT 
+#undef DDR_PHY_DCR_DDRMD_MASK 
+#define DDR_PHY_DCR_DDRMD_DEFVAL                                                   0x0000040D
+#define DDR_PHY_DCR_DDRMD_SHIFT                                                    0
+#define DDR_PHY_DCR_DDRMD_MASK                                                     0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_31_29_MASK 
+#define DDR_PHY_DTPR0_RESERVED_31_29_DEFVAL                                        0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_31_29_SHIFT                                         29
+#define DDR_PHY_DTPR0_RESERVED_31_29_MASK                                          0xE0000000U
+
+/*Activate to activate command delay (different banks)*/
+#undef DDR_PHY_DTPR0_TRRD_DEFVAL 
+#undef DDR_PHY_DTPR0_TRRD_SHIFT 
+#undef DDR_PHY_DTPR0_TRRD_MASK 
+#define DDR_PHY_DTPR0_TRRD_DEFVAL                                                  0x105A2D08
+#define DDR_PHY_DTPR0_TRRD_SHIFT                                                   24
+#define DDR_PHY_DTPR0_TRRD_MASK                                                    0x1F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_23_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_23_MASK 
+#define DDR_PHY_DTPR0_RESERVED_23_DEFVAL                                           0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_23_SHIFT                                            23
+#define DDR_PHY_DTPR0_RESERVED_23_MASK                                             0x00800000U
+
+/*Activate to precharge command delay*/
+#undef DDR_PHY_DTPR0_TRAS_DEFVAL 
+#undef DDR_PHY_DTPR0_TRAS_SHIFT 
+#undef DDR_PHY_DTPR0_TRAS_MASK 
+#define DDR_PHY_DTPR0_TRAS_DEFVAL                                                  0x105A2D08
+#define DDR_PHY_DTPR0_TRAS_SHIFT                                                   16
+#define DDR_PHY_DTPR0_TRAS_MASK                                                    0x007F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_15_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_15_MASK 
+#define DDR_PHY_DTPR0_RESERVED_15_DEFVAL                                           0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_15_SHIFT                                            15
+#define DDR_PHY_DTPR0_RESERVED_15_MASK                                             0x00008000U
+
+/*Precharge command period*/
+#undef DDR_PHY_DTPR0_TRP_DEFVAL 
+#undef DDR_PHY_DTPR0_TRP_SHIFT 
+#undef DDR_PHY_DTPR0_TRP_MASK 
+#define DDR_PHY_DTPR0_TRP_DEFVAL                                                   0x105A2D08
+#define DDR_PHY_DTPR0_TRP_SHIFT                                                    8
+#define DDR_PHY_DTPR0_TRP_MASK                                                     0x00007F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR0_RESERVED_7_5_DEFVAL                                          0x105A2D08
+#define DDR_PHY_DTPR0_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR0_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Internal read to precharge command delay*/
+#undef DDR_PHY_DTPR0_TRTP_DEFVAL 
+#undef DDR_PHY_DTPR0_TRTP_SHIFT 
+#undef DDR_PHY_DTPR0_TRTP_MASK 
+#define DDR_PHY_DTPR0_TRTP_DEFVAL                                                  0x105A2D08
+#define DDR_PHY_DTPR0_TRTP_SHIFT                                                   0
+#define DDR_PHY_DTPR0_TRTP_MASK                                                    0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_31_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_31_MASK 
+#define DDR_PHY_DTPR1_RESERVED_31_DEFVAL                                           0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_31_SHIFT                                            31
+#define DDR_PHY_DTPR1_RESERVED_31_MASK                                             0x80000000U
+
+/*Minimum delay from when write leveling mode is programmed to the first DQS/DQS# rising edge.*/
+#undef DDR_PHY_DTPR1_TWLMRD_DEFVAL 
+#undef DDR_PHY_DTPR1_TWLMRD_SHIFT 
+#undef DDR_PHY_DTPR1_TWLMRD_MASK 
+#define DDR_PHY_DTPR1_TWLMRD_DEFVAL                                                0x5656041E
+#define DDR_PHY_DTPR1_TWLMRD_SHIFT                                                 24
+#define DDR_PHY_DTPR1_TWLMRD_MASK                                                  0x7F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_23_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_23_MASK 
+#define DDR_PHY_DTPR1_RESERVED_23_DEFVAL                                           0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_23_SHIFT                                            23
+#define DDR_PHY_DTPR1_RESERVED_23_MASK                                             0x00800000U
+
+/*4-bank activate period*/
+#undef DDR_PHY_DTPR1_TFAW_DEFVAL 
+#undef DDR_PHY_DTPR1_TFAW_SHIFT 
+#undef DDR_PHY_DTPR1_TFAW_MASK 
+#define DDR_PHY_DTPR1_TFAW_DEFVAL                                                  0x5656041E
+#define DDR_PHY_DTPR1_TFAW_SHIFT                                                   16
+#define DDR_PHY_DTPR1_TFAW_MASK                                                    0x007F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_15_11_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_15_11_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_15_11_MASK 
+#define DDR_PHY_DTPR1_RESERVED_15_11_DEFVAL                                        0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_15_11_SHIFT                                         11
+#define DDR_PHY_DTPR1_RESERVED_15_11_MASK                                          0x0000F800U
+
+/*Load mode update delay (DDR4 and DDR3 only)*/
+#undef DDR_PHY_DTPR1_TMOD_DEFVAL 
+#undef DDR_PHY_DTPR1_TMOD_SHIFT 
+#undef DDR_PHY_DTPR1_TMOD_MASK 
+#define DDR_PHY_DTPR1_TMOD_DEFVAL                                                  0x5656041E
+#define DDR_PHY_DTPR1_TMOD_SHIFT                                                   8
+#define DDR_PHY_DTPR1_TMOD_MASK                                                    0x00000700U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR1_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR1_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR1_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR1_RESERVED_7_5_DEFVAL                                          0x5656041E
+#define DDR_PHY_DTPR1_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR1_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Load mode cycle time*/
+#undef DDR_PHY_DTPR1_TMRD_DEFVAL 
+#undef DDR_PHY_DTPR1_TMRD_SHIFT 
+#undef DDR_PHY_DTPR1_TMRD_MASK 
+#define DDR_PHY_DTPR1_TMRD_DEFVAL                                                  0x5656041E
+#define DDR_PHY_DTPR1_TMRD_SHIFT                                                   0
+#define DDR_PHY_DTPR1_TMRD_MASK                                                    0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_31_29_MASK 
+#define DDR_PHY_DTPR2_RESERVED_31_29_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_31_29_SHIFT                                         29
+#define DDR_PHY_DTPR2_RESERVED_31_29_MASK                                          0xE0000000U
+
+/*Read to Write command delay. Valid values are*/
+#undef DDR_PHY_DTPR2_TRTW_DEFVAL 
+#undef DDR_PHY_DTPR2_TRTW_SHIFT 
+#undef DDR_PHY_DTPR2_TRTW_MASK 
+#define DDR_PHY_DTPR2_TRTW_DEFVAL                                                  0x000B01D0
+#define DDR_PHY_DTPR2_TRTW_SHIFT                                                   28
+#define DDR_PHY_DTPR2_TRTW_MASK                                                    0x10000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_27_25_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_27_25_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_27_25_MASK 
+#define DDR_PHY_DTPR2_RESERVED_27_25_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_27_25_SHIFT                                         25
+#define DDR_PHY_DTPR2_RESERVED_27_25_MASK                                          0x0E000000U
+
+/*Read to ODT delay (DDR3 only)*/
+#undef DDR_PHY_DTPR2_TRTODT_DEFVAL 
+#undef DDR_PHY_DTPR2_TRTODT_SHIFT 
+#undef DDR_PHY_DTPR2_TRTODT_MASK 
+#define DDR_PHY_DTPR2_TRTODT_DEFVAL                                                0x000B01D0
+#define DDR_PHY_DTPR2_TRTODT_SHIFT                                                 24
+#define DDR_PHY_DTPR2_TRTODT_MASK                                                  0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_23_20_MASK 
+#define DDR_PHY_DTPR2_RESERVED_23_20_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_23_20_SHIFT                                         20
+#define DDR_PHY_DTPR2_RESERVED_23_20_MASK                                          0x00F00000U
+
+/*CKE minimum pulse width*/
+#undef DDR_PHY_DTPR2_TCKE_DEFVAL 
+#undef DDR_PHY_DTPR2_TCKE_SHIFT 
+#undef DDR_PHY_DTPR2_TCKE_MASK 
+#define DDR_PHY_DTPR2_TCKE_DEFVAL                                                  0x000B01D0
+#define DDR_PHY_DTPR2_TCKE_SHIFT                                                   16
+#define DDR_PHY_DTPR2_TCKE_MASK                                                    0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR2_RESERVED_15_10_DEFVAL 
+#undef DDR_PHY_DTPR2_RESERVED_15_10_SHIFT 
+#undef DDR_PHY_DTPR2_RESERVED_15_10_MASK 
+#define DDR_PHY_DTPR2_RESERVED_15_10_DEFVAL                                        0x000B01D0
+#define DDR_PHY_DTPR2_RESERVED_15_10_SHIFT                                         10
+#define DDR_PHY_DTPR2_RESERVED_15_10_MASK                                          0x0000FC00U
+
+/*Self refresh exit delay*/
+#undef DDR_PHY_DTPR2_TXS_DEFVAL 
+#undef DDR_PHY_DTPR2_TXS_SHIFT 
+#undef DDR_PHY_DTPR2_TXS_MASK 
+#define DDR_PHY_DTPR2_TXS_DEFVAL                                                   0x000B01D0
+#define DDR_PHY_DTPR2_TXS_SHIFT                                                    0
+#define DDR_PHY_DTPR2_TXS_MASK                                                     0x000003FFU
+
+/*ODT turn-off delay extension*/
+#undef DDR_PHY_DTPR3_TOFDX_DEFVAL 
+#undef DDR_PHY_DTPR3_TOFDX_SHIFT 
+#undef DDR_PHY_DTPR3_TOFDX_MASK 
+#define DDR_PHY_DTPR3_TOFDX_DEFVAL                                                 0x02000804
+#define DDR_PHY_DTPR3_TOFDX_SHIFT                                                  29
+#define DDR_PHY_DTPR3_TOFDX_MASK                                                   0xE0000000U
+
+/*Read to read and write to write command delay*/
+#undef DDR_PHY_DTPR3_TCCD_DEFVAL 
+#undef DDR_PHY_DTPR3_TCCD_SHIFT 
+#undef DDR_PHY_DTPR3_TCCD_MASK 
+#define DDR_PHY_DTPR3_TCCD_DEFVAL                                                  0x02000804
+#define DDR_PHY_DTPR3_TCCD_SHIFT                                                   26
+#define DDR_PHY_DTPR3_TCCD_MASK                                                    0x1C000000U
+
+/*DLL locking time*/
+#undef DDR_PHY_DTPR3_TDLLK_DEFVAL 
+#undef DDR_PHY_DTPR3_TDLLK_SHIFT 
+#undef DDR_PHY_DTPR3_TDLLK_MASK 
+#define DDR_PHY_DTPR3_TDLLK_DEFVAL                                                 0x02000804
+#define DDR_PHY_DTPR3_TDLLK_SHIFT                                                  16
+#define DDR_PHY_DTPR3_TDLLK_MASK                                                   0x03FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR3_RESERVED_15_12_DEFVAL 
+#undef DDR_PHY_DTPR3_RESERVED_15_12_SHIFT 
+#undef DDR_PHY_DTPR3_RESERVED_15_12_MASK 
+#define DDR_PHY_DTPR3_RESERVED_15_12_DEFVAL                                        0x02000804
+#define DDR_PHY_DTPR3_RESERVED_15_12_SHIFT                                         12
+#define DDR_PHY_DTPR3_RESERVED_15_12_MASK                                          0x0000F000U
+
+/*Maximum DQS output access time from CK/CK# (LPDDR2/3 only)*/
+#undef DDR_PHY_DTPR3_TDQSCKMAX_DEFVAL 
+#undef DDR_PHY_DTPR3_TDQSCKMAX_SHIFT 
+#undef DDR_PHY_DTPR3_TDQSCKMAX_MASK 
+#define DDR_PHY_DTPR3_TDQSCKMAX_DEFVAL                                             0x02000804
+#define DDR_PHY_DTPR3_TDQSCKMAX_SHIFT                                              8
+#define DDR_PHY_DTPR3_TDQSCKMAX_MASK                                               0x00000F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR3_RESERVED_7_3_DEFVAL 
+#undef DDR_PHY_DTPR3_RESERVED_7_3_SHIFT 
+#undef DDR_PHY_DTPR3_RESERVED_7_3_MASK 
+#define DDR_PHY_DTPR3_RESERVED_7_3_DEFVAL                                          0x02000804
+#define DDR_PHY_DTPR3_RESERVED_7_3_SHIFT                                           3
+#define DDR_PHY_DTPR3_RESERVED_7_3_MASK                                            0x000000F8U
+
+/*DQS output access time from CK/CK# (LPDDR2/3 only)*/
+#undef DDR_PHY_DTPR3_TDQSCK_DEFVAL 
+#undef DDR_PHY_DTPR3_TDQSCK_SHIFT 
+#undef DDR_PHY_DTPR3_TDQSCK_MASK 
+#define DDR_PHY_DTPR3_TDQSCK_DEFVAL                                                0x02000804
+#define DDR_PHY_DTPR3_TDQSCK_SHIFT                                                 0
+#define DDR_PHY_DTPR3_TDQSCK_MASK                                                  0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_31_30_MASK 
+#define DDR_PHY_DTPR4_RESERVED_31_30_DEFVAL                                        0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_31_30_SHIFT                                         30
+#define DDR_PHY_DTPR4_RESERVED_31_30_MASK                                          0xC0000000U
+
+/*ODT turn-on/turn-off delays (DDR2 only)*/
+#undef DDR_PHY_DTPR4_TAOND_TAOFD_DEFVAL 
+#undef DDR_PHY_DTPR4_TAOND_TAOFD_SHIFT 
+#undef DDR_PHY_DTPR4_TAOND_TAOFD_MASK 
+#define DDR_PHY_DTPR4_TAOND_TAOFD_DEFVAL                                           0x01C02B10
+#define DDR_PHY_DTPR4_TAOND_TAOFD_SHIFT                                            28
+#define DDR_PHY_DTPR4_TAOND_TAOFD_MASK                                             0x30000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_27_26_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_27_26_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_27_26_MASK 
+#define DDR_PHY_DTPR4_RESERVED_27_26_DEFVAL                                        0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_27_26_SHIFT                                         26
+#define DDR_PHY_DTPR4_RESERVED_27_26_MASK                                          0x0C000000U
+
+/*Refresh-to-Refresh*/
+#undef DDR_PHY_DTPR4_TRFC_DEFVAL 
+#undef DDR_PHY_DTPR4_TRFC_SHIFT 
+#undef DDR_PHY_DTPR4_TRFC_MASK 
+#define DDR_PHY_DTPR4_TRFC_DEFVAL                                                  0x01C02B10
+#define DDR_PHY_DTPR4_TRFC_SHIFT                                                   16
+#define DDR_PHY_DTPR4_TRFC_MASK                                                    0x03FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_15_14_MASK 
+#define DDR_PHY_DTPR4_RESERVED_15_14_DEFVAL                                        0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_15_14_SHIFT                                         14
+#define DDR_PHY_DTPR4_RESERVED_15_14_MASK                                          0x0000C000U
+
+/*Write leveling output delay*/
+#undef DDR_PHY_DTPR4_TWLO_DEFVAL 
+#undef DDR_PHY_DTPR4_TWLO_SHIFT 
+#undef DDR_PHY_DTPR4_TWLO_MASK 
+#define DDR_PHY_DTPR4_TWLO_DEFVAL                                                  0x01C02B10
+#define DDR_PHY_DTPR4_TWLO_SHIFT                                                   8
+#define DDR_PHY_DTPR4_TWLO_MASK                                                    0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR4_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR4_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR4_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR4_RESERVED_7_5_DEFVAL                                          0x01C02B10
+#define DDR_PHY_DTPR4_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR4_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Power down exit delay*/
+#undef DDR_PHY_DTPR4_TXP_DEFVAL 
+#undef DDR_PHY_DTPR4_TXP_SHIFT 
+#undef DDR_PHY_DTPR4_TXP_MASK 
+#define DDR_PHY_DTPR4_TXP_DEFVAL                                                   0x01C02B10
+#define DDR_PHY_DTPR4_TXP_SHIFT                                                    0
+#define DDR_PHY_DTPR4_TXP_MASK                                                     0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR5_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DTPR5_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DTPR5_RESERVED_31_24_MASK 
+#define DDR_PHY_DTPR5_RESERVED_31_24_DEFVAL                                        0x00872716
+#define DDR_PHY_DTPR5_RESERVED_31_24_SHIFT                                         24
+#define DDR_PHY_DTPR5_RESERVED_31_24_MASK                                          0xFF000000U
+
+/*Activate to activate command delay (same bank)*/
+#undef DDR_PHY_DTPR5_TRC_DEFVAL 
+#undef DDR_PHY_DTPR5_TRC_SHIFT 
+#undef DDR_PHY_DTPR5_TRC_MASK 
+#define DDR_PHY_DTPR5_TRC_DEFVAL                                                   0x00872716
+#define DDR_PHY_DTPR5_TRC_SHIFT                                                    16
+#define DDR_PHY_DTPR5_TRC_MASK                                                     0x00FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DTPR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DTPR5_RESERVED_15_MASK 
+#define DDR_PHY_DTPR5_RESERVED_15_DEFVAL                                           0x00872716
+#define DDR_PHY_DTPR5_RESERVED_15_SHIFT                                            15
+#define DDR_PHY_DTPR5_RESERVED_15_MASK                                             0x00008000U
+
+/*Activate to read or write delay*/
+#undef DDR_PHY_DTPR5_TRCD_DEFVAL 
+#undef DDR_PHY_DTPR5_TRCD_SHIFT 
+#undef DDR_PHY_DTPR5_TRCD_MASK 
+#define DDR_PHY_DTPR5_TRCD_DEFVAL                                                  0x00872716
+#define DDR_PHY_DTPR5_TRCD_SHIFT                                                   8
+#define DDR_PHY_DTPR5_TRCD_MASK                                                    0x00007F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR5_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DTPR5_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DTPR5_RESERVED_7_5_MASK 
+#define DDR_PHY_DTPR5_RESERVED_7_5_DEFVAL                                          0x00872716
+#define DDR_PHY_DTPR5_RESERVED_7_5_SHIFT                                           5
+#define DDR_PHY_DTPR5_RESERVED_7_5_MASK                                            0x000000E0U
+
+/*Internal write to read command delay*/
+#undef DDR_PHY_DTPR5_TWTR_DEFVAL 
+#undef DDR_PHY_DTPR5_TWTR_SHIFT 
+#undef DDR_PHY_DTPR5_TWTR_MASK 
+#define DDR_PHY_DTPR5_TWTR_DEFVAL                                                  0x00872716
+#define DDR_PHY_DTPR5_TWTR_SHIFT                                                   0
+#define DDR_PHY_DTPR5_TWTR_MASK                                                    0x0000001FU
+
+/*PUB Write Latency Enable*/
+#undef DDR_PHY_DTPR6_PUBWLEN_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBWLEN_SHIFT 
+#undef DDR_PHY_DTPR6_PUBWLEN_MASK 
+#define DDR_PHY_DTPR6_PUBWLEN_DEFVAL                                               0x00000505
+#define DDR_PHY_DTPR6_PUBWLEN_SHIFT                                                31
+#define DDR_PHY_DTPR6_PUBWLEN_MASK                                                 0x80000000U
+
+/*PUB Read Latency Enable*/
+#undef DDR_PHY_DTPR6_PUBRLEN_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBRLEN_SHIFT 
+#undef DDR_PHY_DTPR6_PUBRLEN_MASK 
+#define DDR_PHY_DTPR6_PUBRLEN_DEFVAL                                               0x00000505
+#define DDR_PHY_DTPR6_PUBRLEN_SHIFT                                                30
+#define DDR_PHY_DTPR6_PUBRLEN_MASK                                                 0x40000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR6_RESERVED_29_14_DEFVAL 
+#undef DDR_PHY_DTPR6_RESERVED_29_14_SHIFT 
+#undef DDR_PHY_DTPR6_RESERVED_29_14_MASK 
+#define DDR_PHY_DTPR6_RESERVED_29_14_DEFVAL                                        0x00000505
+#define DDR_PHY_DTPR6_RESERVED_29_14_SHIFT                                         14
+#define DDR_PHY_DTPR6_RESERVED_29_14_MASK                                          0x3FFFC000U
+
+/*Write Latency*/
+#undef DDR_PHY_DTPR6_PUBWL_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBWL_SHIFT 
+#undef DDR_PHY_DTPR6_PUBWL_MASK 
+#define DDR_PHY_DTPR6_PUBWL_DEFVAL                                                 0x00000505
+#define DDR_PHY_DTPR6_PUBWL_SHIFT                                                  8
+#define DDR_PHY_DTPR6_PUBWL_MASK                                                   0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTPR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DTPR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DTPR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DTPR6_RESERVED_7_6_DEFVAL                                          0x00000505
+#define DDR_PHY_DTPR6_RESERVED_7_6_SHIFT                                           6
+#define DDR_PHY_DTPR6_RESERVED_7_6_MASK                                            0x000000C0U
+
+/*Read Latency*/
+#undef DDR_PHY_DTPR6_PUBRL_DEFVAL 
+#undef DDR_PHY_DTPR6_PUBRL_SHIFT 
+#undef DDR_PHY_DTPR6_PUBRL_MASK 
+#define DDR_PHY_DTPR6_PUBRL_DEFVAL                                                 0x00000505
+#define DDR_PHY_DTPR6_PUBRL_SHIFT                                                  0
+#define DDR_PHY_DTPR6_PUBRL_MASK                                                   0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_31_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_31_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_31_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_31_DEFVAL                                       0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_31_SHIFT                                        31
+#define DDR_PHY_RDIMMGCR0_RESERVED_31_MASK                                         0x80000000U
+
+/*RDMIMM Quad CS Enable*/
+#undef DDR_PHY_RDIMMGCR0_QCSEN_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_QCSEN_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_QCSEN_MASK 
+#define DDR_PHY_RDIMMGCR0_QCSEN_DEFVAL                                             0x08400020
+#define DDR_PHY_RDIMMGCR0_QCSEN_SHIFT                                              30
+#define DDR_PHY_RDIMMGCR0_QCSEN_MASK                                               0x40000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_29_28_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_29_28_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_29_28_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_29_28_DEFVAL                                    0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_29_28_SHIFT                                     28
+#define DDR_PHY_RDIMMGCR0_RESERVED_29_28_MASK                                      0x30000000U
+
+/*RDIMM Outputs I/O Mode*/
+#undef DDR_PHY_RDIMMGCR0_RDIMMIOM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RDIMMIOM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RDIMMIOM_MASK 
+#define DDR_PHY_RDIMMGCR0_RDIMMIOM_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_RDIMMIOM_SHIFT                                           27
+#define DDR_PHY_RDIMMGCR0_RDIMMIOM_MASK                                            0x08000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_26_24_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_26_24_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_26_24_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_26_24_DEFVAL                                    0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_26_24_SHIFT                                     24
+#define DDR_PHY_RDIMMGCR0_RESERVED_26_24_MASK                                      0x07000000U
+
+/*ERROUT# Output Enable*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTOE_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTOE_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTOE_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTOE_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTOE_SHIFT                                           23
+#define DDR_PHY_RDIMMGCR0_ERROUTOE_MASK                                            0x00800000U
+
+/*ERROUT# I/O Mode*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTIOM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTIOM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTIOM_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTIOM_DEFVAL                                         0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTIOM_SHIFT                                          22
+#define DDR_PHY_RDIMMGCR0_ERROUTIOM_MASK                                           0x00400000U
+
+/*ERROUT# Power Down Receiver*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTPDR_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTPDR_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTPDR_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTPDR_DEFVAL                                         0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTPDR_SHIFT                                          21
+#define DDR_PHY_RDIMMGCR0_ERROUTPDR_MASK                                           0x00200000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_20_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_20_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_20_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_20_DEFVAL                                       0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_20_SHIFT                                        20
+#define DDR_PHY_RDIMMGCR0_RESERVED_20_MASK                                         0x00100000U
+
+/*ERROUT# On-Die Termination*/
+#undef DDR_PHY_RDIMMGCR0_ERROUTODT_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERROUTODT_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERROUTODT_MASK 
+#define DDR_PHY_RDIMMGCR0_ERROUTODT_DEFVAL                                         0x08400020
+#define DDR_PHY_RDIMMGCR0_ERROUTODT_SHIFT                                          19
+#define DDR_PHY_RDIMMGCR0_ERROUTODT_MASK                                           0x00080000U
+
+/*Load Reduced DIMM*/
+#undef DDR_PHY_RDIMMGCR0_LRDIMM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_LRDIMM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_LRDIMM_MASK 
+#define DDR_PHY_RDIMMGCR0_LRDIMM_DEFVAL                                            0x08400020
+#define DDR_PHY_RDIMMGCR0_LRDIMM_SHIFT                                             18
+#define DDR_PHY_RDIMMGCR0_LRDIMM_MASK                                              0x00040000U
+
+/*PAR_IN I/O Mode*/
+#undef DDR_PHY_RDIMMGCR0_PARINIOM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_PARINIOM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_PARINIOM_MASK 
+#define DDR_PHY_RDIMMGCR0_PARINIOM_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_PARINIOM_SHIFT                                           17
+#define DDR_PHY_RDIMMGCR0_PARINIOM_MASK                                            0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_16_8_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_16_8_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_16_8_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_16_8_DEFVAL                                     0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_16_8_SHIFT                                      8
+#define DDR_PHY_RDIMMGCR0_RESERVED_16_8_MASK                                       0x0001FF00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_MASK 
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_DEFVAL                                     0x08400020
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_SHIFT                                      6
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_MASK                                       0x000000C0U
+
+/*Rank Mirror Enable.*/
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RNKMRREN_MASK 
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_SHIFT                                           4
+#define DDR_PHY_RDIMMGCR0_RNKMRREN_MASK                                            0x00000030U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR0_RESERVED_3_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_3_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RESERVED_3_MASK 
+#define DDR_PHY_RDIMMGCR0_RESERVED_3_DEFVAL                                        0x08400020
+#define DDR_PHY_RDIMMGCR0_RESERVED_3_SHIFT                                         3
+#define DDR_PHY_RDIMMGCR0_RESERVED_3_MASK                                          0x00000008U
+
+/*Stop on Parity Error*/
+#undef DDR_PHY_RDIMMGCR0_SOPERR_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_SOPERR_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_SOPERR_MASK 
+#define DDR_PHY_RDIMMGCR0_SOPERR_DEFVAL                                            0x08400020
+#define DDR_PHY_RDIMMGCR0_SOPERR_SHIFT                                             2
+#define DDR_PHY_RDIMMGCR0_SOPERR_MASK                                              0x00000004U
+
+/*Parity Error No Registering*/
+#undef DDR_PHY_RDIMMGCR0_ERRNOREG_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_ERRNOREG_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_ERRNOREG_MASK 
+#define DDR_PHY_RDIMMGCR0_ERRNOREG_DEFVAL                                          0x08400020
+#define DDR_PHY_RDIMMGCR0_ERRNOREG_SHIFT                                           1
+#define DDR_PHY_RDIMMGCR0_ERRNOREG_MASK                                            0x00000002U
+
+/*Registered DIMM*/
+#undef DDR_PHY_RDIMMGCR0_RDIMM_DEFVAL 
+#undef DDR_PHY_RDIMMGCR0_RDIMM_SHIFT 
+#undef DDR_PHY_RDIMMGCR0_RDIMM_MASK 
+#define DDR_PHY_RDIMMGCR0_RDIMM_DEFVAL                                             0x08400020
+#define DDR_PHY_RDIMMGCR0_RDIMM_SHIFT                                              0
+#define DDR_PHY_RDIMMGCR0_RDIMM_MASK                                               0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_31_29_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_31_29_DEFVAL                                    0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_31_29_SHIFT                                     29
+#define DDR_PHY_RDIMMGCR1_RESERVED_31_29_MASK                                      0xE0000000U
+
+/*Address [17] B-side Inversion Disable*/
+#undef DDR_PHY_RDIMMGCR1_A17BID_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_A17BID_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_A17BID_MASK 
+#define DDR_PHY_RDIMMGCR1_A17BID_DEFVAL                                            0x00000C80
+#define DDR_PHY_RDIMMGCR1_A17BID_SHIFT                                             28
+#define DDR_PHY_RDIMMGCR1_A17BID_MASK                                              0x10000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_27_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_27_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_27_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_27_DEFVAL                                       0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_27_SHIFT                                        27
+#define DDR_PHY_RDIMMGCR1_RESERVED_27_MASK                                         0x08000000U
+
+/*Command word to command word programming delay*/
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L2_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L2_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L2_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L2_DEFVAL                                         0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L2_SHIFT                                          24
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L2_MASK                                           0x07000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_23_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_23_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_23_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_23_DEFVAL                                       0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_23_SHIFT                                        23
+#define DDR_PHY_RDIMMGCR1_RESERVED_23_MASK                                         0x00800000U
+
+/*Command word to command word programming delay*/
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_L_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L_DEFVAL                                          0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L_SHIFT                                           20
+#define DDR_PHY_RDIMMGCR1_TBCMRD_L_MASK                                            0x00700000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_19_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_19_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_19_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_19_DEFVAL                                       0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_19_SHIFT                                        19
+#define DDR_PHY_RDIMMGCR1_RESERVED_19_MASK                                         0x00080000U
+
+/*Command word to command word programming delay*/
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCMRD_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCMRD_DEFVAL                                            0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCMRD_SHIFT                                             16
+#define DDR_PHY_RDIMMGCR1_TBCMRD_MASK                                              0x00070000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RDIMMGCR1_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_RESERVED_15_14_MASK 
+#define DDR_PHY_RDIMMGCR1_RESERVED_15_14_DEFVAL                                    0x00000C80
+#define DDR_PHY_RDIMMGCR1_RESERVED_15_14_SHIFT                                     14
+#define DDR_PHY_RDIMMGCR1_RESERVED_15_14_MASK                                      0x0000C000U
+
+/*Stabilization time*/
+#undef DDR_PHY_RDIMMGCR1_TBCSTAB_DEFVAL 
+#undef DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT 
+#undef DDR_PHY_RDIMMGCR1_TBCSTAB_MASK 
+#define DDR_PHY_RDIMMGCR1_TBCSTAB_DEFVAL                                           0x00000C80
+#define DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT                                            0
+#define DDR_PHY_RDIMMGCR1_TBCSTAB_MASK                                             0x00003FFFU
+
+/*Control Word 15*/
+#undef DDR_PHY_RDIMMCR1_RC15_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC15_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC15_MASK 
+#define DDR_PHY_RDIMMCR1_RC15_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC15_SHIFT                                                28
+#define DDR_PHY_RDIMMCR1_RC15_MASK                                                 0xF0000000U
+
+/*DDR4 Control Word 14 (Parity Control Word) / DDR3 Reserved*/
+#undef DDR_PHY_RDIMMCR1_RC14_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC14_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC14_MASK 
+#define DDR_PHY_RDIMMCR1_RC14_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC14_SHIFT                                                24
+#define DDR_PHY_RDIMMCR1_RC14_MASK                                                 0x0F000000U
+
+/*DDR4 Control Word 13 (DIMM Configuration Control Word) / DDR3 Reserved*/
+#undef DDR_PHY_RDIMMCR1_RC13_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC13_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC13_MASK 
+#define DDR_PHY_RDIMMCR1_RC13_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC13_SHIFT                                                20
+#define DDR_PHY_RDIMMCR1_RC13_MASK                                                 0x00F00000U
+
+/*DDR4 Control Word 12 (Training Control Word) / DDR3 Reserved*/
+#undef DDR_PHY_RDIMMCR1_RC12_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC12_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC12_MASK 
+#define DDR_PHY_RDIMMCR1_RC12_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC12_SHIFT                                                16
+#define DDR_PHY_RDIMMCR1_RC12_MASK                                                 0x000F0000U
+
+/*DDR4 Control Word 11 (Operating Voltage VDD and VREFCA Source Control Word) / DDR3 Control Word 11 (Operation Voltage VDD Con
+		rol Word)*/
+#undef DDR_PHY_RDIMMCR1_RC11_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC11_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC11_MASK 
+#define DDR_PHY_RDIMMCR1_RC11_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC11_SHIFT                                                12
+#define DDR_PHY_RDIMMCR1_RC11_MASK                                                 0x0000F000U
+
+/*DDR4/DDR3 Control Word 10 (RDIMM Operating Speed Control Word)*/
+#undef DDR_PHY_RDIMMCR1_RC10_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC10_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC10_MASK 
+#define DDR_PHY_RDIMMCR1_RC10_DEFVAL                                               0x00000000
+#define DDR_PHY_RDIMMCR1_RC10_SHIFT                                                8
+#define DDR_PHY_RDIMMCR1_RC10_MASK                                                 0x00000F00U
+
+/*DDR4/DDR3 Control Word 9 (Power Saving Settings Control Word)*/
+#undef DDR_PHY_RDIMMCR1_RC9_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC9_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC9_MASK 
+#define DDR_PHY_RDIMMCR1_RC9_DEFVAL                                                0x00000000
+#define DDR_PHY_RDIMMCR1_RC9_SHIFT                                                 4
+#define DDR_PHY_RDIMMCR1_RC9_MASK                                                  0x000000F0U
+
+/*DDR4 Control Word 8 (Input/Output Configuration Control Word) / DDR3 Control Word 8 (Additional Input Bus Termination Setting
+		Control Word)*/
+#undef DDR_PHY_RDIMMCR1_RC8_DEFVAL 
+#undef DDR_PHY_RDIMMCR1_RC8_SHIFT 
+#undef DDR_PHY_RDIMMCR1_RC8_MASK 
+#define DDR_PHY_RDIMMCR1_RC8_DEFVAL                                                0x00000000
+#define DDR_PHY_RDIMMCR1_RC8_SHIFT                                                 0
+#define DDR_PHY_RDIMMCR1_RC8_MASK                                                  0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR0_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR0_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR0_RESERVED_31_8_MASK 
+#define DDR_PHY_MR0_RESERVED_31_8_DEFVAL                                           0x00000052
+#define DDR_PHY_MR0_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR0_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*CA Terminating Rank*/
+#undef DDR_PHY_MR0_CATR_DEFVAL 
+#undef DDR_PHY_MR0_CATR_SHIFT 
+#undef DDR_PHY_MR0_CATR_MASK 
+#define DDR_PHY_MR0_CATR_DEFVAL                                                    0x00000052
+#define DDR_PHY_MR0_CATR_SHIFT                                                     7
+#define DDR_PHY_MR0_CATR_MASK                                                      0x00000080U
+
+/*Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR0_RSVD_6_5_DEFVAL 
+#undef DDR_PHY_MR0_RSVD_6_5_SHIFT 
+#undef DDR_PHY_MR0_RSVD_6_5_MASK 
+#define DDR_PHY_MR0_RSVD_6_5_DEFVAL                                                0x00000052
+#define DDR_PHY_MR0_RSVD_6_5_SHIFT                                                 5
+#define DDR_PHY_MR0_RSVD_6_5_MASK                                                  0x00000060U
+
+/*Built-in Self-Test for RZQ*/
+#undef DDR_PHY_MR0_RZQI_DEFVAL 
+#undef DDR_PHY_MR0_RZQI_SHIFT 
+#undef DDR_PHY_MR0_RZQI_MASK 
+#define DDR_PHY_MR0_RZQI_DEFVAL                                                    0x00000052
+#define DDR_PHY_MR0_RZQI_SHIFT                                                     3
+#define DDR_PHY_MR0_RZQI_MASK                                                      0x00000018U
+
+/*Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR0_RSVD_2_0_DEFVAL 
+#undef DDR_PHY_MR0_RSVD_2_0_SHIFT 
+#undef DDR_PHY_MR0_RSVD_2_0_MASK 
+#define DDR_PHY_MR0_RSVD_2_0_DEFVAL                                                0x00000052
+#define DDR_PHY_MR0_RSVD_2_0_SHIFT                                                 0
+#define DDR_PHY_MR0_RSVD_2_0_MASK                                                  0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR1_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR1_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR1_RESERVED_31_8_MASK 
+#define DDR_PHY_MR1_RESERVED_31_8_DEFVAL                                           0x00000004
+#define DDR_PHY_MR1_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR1_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*Read Postamble Length*/
+#undef DDR_PHY_MR1_RDPST_DEFVAL 
+#undef DDR_PHY_MR1_RDPST_SHIFT 
+#undef DDR_PHY_MR1_RDPST_MASK 
+#define DDR_PHY_MR1_RDPST_DEFVAL                                                   0x00000004
+#define DDR_PHY_MR1_RDPST_SHIFT                                                    7
+#define DDR_PHY_MR1_RDPST_MASK                                                     0x00000080U
+
+/*Write-recovery for auto-precharge command*/
+#undef DDR_PHY_MR1_NWR_DEFVAL 
+#undef DDR_PHY_MR1_NWR_SHIFT 
+#undef DDR_PHY_MR1_NWR_MASK 
+#define DDR_PHY_MR1_NWR_DEFVAL                                                     0x00000004
+#define DDR_PHY_MR1_NWR_SHIFT                                                      4
+#define DDR_PHY_MR1_NWR_MASK                                                       0x00000070U
+
+/*Read Preamble Length*/
+#undef DDR_PHY_MR1_RDPRE_DEFVAL 
+#undef DDR_PHY_MR1_RDPRE_SHIFT 
+#undef DDR_PHY_MR1_RDPRE_MASK 
+#define DDR_PHY_MR1_RDPRE_DEFVAL                                                   0x00000004
+#define DDR_PHY_MR1_RDPRE_SHIFT                                                    3
+#define DDR_PHY_MR1_RDPRE_MASK                                                     0x00000008U
+
+/*Write Preamble Length*/
+#undef DDR_PHY_MR1_WRPRE_DEFVAL 
+#undef DDR_PHY_MR1_WRPRE_SHIFT 
+#undef DDR_PHY_MR1_WRPRE_MASK 
+#define DDR_PHY_MR1_WRPRE_DEFVAL                                                   0x00000004
+#define DDR_PHY_MR1_WRPRE_SHIFT                                                    2
+#define DDR_PHY_MR1_WRPRE_MASK                                                     0x00000004U
+
+/*Burst Length*/
+#undef DDR_PHY_MR1_BL_DEFVAL 
+#undef DDR_PHY_MR1_BL_SHIFT 
+#undef DDR_PHY_MR1_BL_MASK 
+#define DDR_PHY_MR1_BL_DEFVAL                                                      0x00000004
+#define DDR_PHY_MR1_BL_SHIFT                                                       0
+#define DDR_PHY_MR1_BL_MASK                                                        0x00000003U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR2_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR2_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR2_RESERVED_31_8_MASK 
+#define DDR_PHY_MR2_RESERVED_31_8_DEFVAL                                           0x00000000
+#define DDR_PHY_MR2_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR2_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*Write Leveling*/
+#undef DDR_PHY_MR2_WRL_DEFVAL 
+#undef DDR_PHY_MR2_WRL_SHIFT 
+#undef DDR_PHY_MR2_WRL_MASK 
+#define DDR_PHY_MR2_WRL_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR2_WRL_SHIFT                                                      7
+#define DDR_PHY_MR2_WRL_MASK                                                       0x00000080U
+
+/*Write Latency Set*/
+#undef DDR_PHY_MR2_WLS_DEFVAL 
+#undef DDR_PHY_MR2_WLS_SHIFT 
+#undef DDR_PHY_MR2_WLS_MASK 
+#define DDR_PHY_MR2_WLS_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR2_WLS_SHIFT                                                      6
+#define DDR_PHY_MR2_WLS_MASK                                                       0x00000040U
+
+/*Write Latency*/
+#undef DDR_PHY_MR2_WL_DEFVAL 
+#undef DDR_PHY_MR2_WL_SHIFT 
+#undef DDR_PHY_MR2_WL_MASK 
+#define DDR_PHY_MR2_WL_DEFVAL                                                      0x00000000
+#define DDR_PHY_MR2_WL_SHIFT                                                       3
+#define DDR_PHY_MR2_WL_MASK                                                        0x00000038U
+
+/*Read Latency*/
+#undef DDR_PHY_MR2_RL_DEFVAL 
+#undef DDR_PHY_MR2_RL_SHIFT 
+#undef DDR_PHY_MR2_RL_MASK 
+#define DDR_PHY_MR2_RL_DEFVAL                                                      0x00000000
+#define DDR_PHY_MR2_RL_SHIFT                                                       0
+#define DDR_PHY_MR2_RL_MASK                                                        0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR3_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR3_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR3_RESERVED_31_8_MASK 
+#define DDR_PHY_MR3_RESERVED_31_8_DEFVAL                                           0x00000031
+#define DDR_PHY_MR3_RESERVED_31_8_SHIFT                                            8
+#define DDR_PHY_MR3_RESERVED_31_8_MASK                                             0xFFFFFF00U
+
+/*DBI-Write Enable*/
+#undef DDR_PHY_MR3_DBIWR_DEFVAL 
+#undef DDR_PHY_MR3_DBIWR_SHIFT 
+#undef DDR_PHY_MR3_DBIWR_MASK 
+#define DDR_PHY_MR3_DBIWR_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_DBIWR_SHIFT                                                    7
+#define DDR_PHY_MR3_DBIWR_MASK                                                     0x00000080U
+
+/*DBI-Read Enable*/
+#undef DDR_PHY_MR3_DBIRD_DEFVAL 
+#undef DDR_PHY_MR3_DBIRD_SHIFT 
+#undef DDR_PHY_MR3_DBIRD_MASK 
+#define DDR_PHY_MR3_DBIRD_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_DBIRD_SHIFT                                                    6
+#define DDR_PHY_MR3_DBIRD_MASK                                                     0x00000040U
+
+/*Pull-down Drive Strength*/
+#undef DDR_PHY_MR3_PDDS_DEFVAL 
+#undef DDR_PHY_MR3_PDDS_SHIFT 
+#undef DDR_PHY_MR3_PDDS_MASK 
+#define DDR_PHY_MR3_PDDS_DEFVAL                                                    0x00000031
+#define DDR_PHY_MR3_PDDS_SHIFT                                                     3
+#define DDR_PHY_MR3_PDDS_MASK                                                      0x00000038U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR3_RSVD_DEFVAL 
+#undef DDR_PHY_MR3_RSVD_SHIFT 
+#undef DDR_PHY_MR3_RSVD_MASK 
+#define DDR_PHY_MR3_RSVD_DEFVAL                                                    0x00000031
+#define DDR_PHY_MR3_RSVD_SHIFT                                                     2
+#define DDR_PHY_MR3_RSVD_MASK                                                      0x00000004U
+
+/*Write Postamble Length*/
+#undef DDR_PHY_MR3_WRPST_DEFVAL 
+#undef DDR_PHY_MR3_WRPST_SHIFT 
+#undef DDR_PHY_MR3_WRPST_MASK 
+#define DDR_PHY_MR3_WRPST_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_WRPST_SHIFT                                                    1
+#define DDR_PHY_MR3_WRPST_MASK                                                     0x00000002U
+
+/*Pull-up Calibration Point*/
+#undef DDR_PHY_MR3_PUCAL_DEFVAL 
+#undef DDR_PHY_MR3_PUCAL_SHIFT 
+#undef DDR_PHY_MR3_PUCAL_MASK 
+#define DDR_PHY_MR3_PUCAL_DEFVAL                                                   0x00000031
+#define DDR_PHY_MR3_PUCAL_SHIFT                                                    0
+#define DDR_PHY_MR3_PUCAL_MASK                                                     0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR4_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_MR4_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_MR4_RESERVED_31_16_MASK 
+#define DDR_PHY_MR4_RESERVED_31_16_DEFVAL                                          0x00000000
+#define DDR_PHY_MR4_RESERVED_31_16_SHIFT                                           16
+#define DDR_PHY_MR4_RESERVED_31_16_MASK                                            0xFFFF0000U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR4_RSVD_15_13_DEFVAL 
+#undef DDR_PHY_MR4_RSVD_15_13_SHIFT 
+#undef DDR_PHY_MR4_RSVD_15_13_MASK 
+#define DDR_PHY_MR4_RSVD_15_13_DEFVAL                                              0x00000000
+#define DDR_PHY_MR4_RSVD_15_13_SHIFT                                               13
+#define DDR_PHY_MR4_RSVD_15_13_MASK                                                0x0000E000U
+
+/*Write Preamble*/
+#undef DDR_PHY_MR4_WRP_DEFVAL 
+#undef DDR_PHY_MR4_WRP_SHIFT 
+#undef DDR_PHY_MR4_WRP_MASK 
+#define DDR_PHY_MR4_WRP_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_WRP_SHIFT                                                      12
+#define DDR_PHY_MR4_WRP_MASK                                                       0x00001000U
+
+/*Read Preamble*/
+#undef DDR_PHY_MR4_RDP_DEFVAL 
+#undef DDR_PHY_MR4_RDP_SHIFT 
+#undef DDR_PHY_MR4_RDP_MASK 
+#define DDR_PHY_MR4_RDP_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_RDP_SHIFT                                                      11
+#define DDR_PHY_MR4_RDP_MASK                                                       0x00000800U
+
+/*Read Preamble Training Mode*/
+#undef DDR_PHY_MR4_RPTM_DEFVAL 
+#undef DDR_PHY_MR4_RPTM_SHIFT 
+#undef DDR_PHY_MR4_RPTM_MASK 
+#define DDR_PHY_MR4_RPTM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_RPTM_SHIFT                                                     10
+#define DDR_PHY_MR4_RPTM_MASK                                                      0x00000400U
+
+/*Self Refresh Abort*/
+#undef DDR_PHY_MR4_SRA_DEFVAL 
+#undef DDR_PHY_MR4_SRA_SHIFT 
+#undef DDR_PHY_MR4_SRA_MASK 
+#define DDR_PHY_MR4_SRA_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_SRA_SHIFT                                                      9
+#define DDR_PHY_MR4_SRA_MASK                                                       0x00000200U
+
+/*CS to Command Latency Mode*/
+#undef DDR_PHY_MR4_CS2CMDL_DEFVAL 
+#undef DDR_PHY_MR4_CS2CMDL_SHIFT 
+#undef DDR_PHY_MR4_CS2CMDL_MASK 
+#define DDR_PHY_MR4_CS2CMDL_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR4_CS2CMDL_SHIFT                                                  6
+#define DDR_PHY_MR4_CS2CMDL_MASK                                                   0x000001C0U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR4_RSVD1_DEFVAL 
+#undef DDR_PHY_MR4_RSVD1_SHIFT 
+#undef DDR_PHY_MR4_RSVD1_MASK 
+#define DDR_PHY_MR4_RSVD1_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR4_RSVD1_SHIFT                                                    5
+#define DDR_PHY_MR4_RSVD1_MASK                                                     0x00000020U
+
+/*Internal VREF Monitor*/
+#undef DDR_PHY_MR4_IVM_DEFVAL 
+#undef DDR_PHY_MR4_IVM_SHIFT 
+#undef DDR_PHY_MR4_IVM_MASK 
+#define DDR_PHY_MR4_IVM_DEFVAL                                                     0x00000000
+#define DDR_PHY_MR4_IVM_SHIFT                                                      4
+#define DDR_PHY_MR4_IVM_MASK                                                       0x00000010U
+
+/*Temperature Controlled Refresh Mode*/
+#undef DDR_PHY_MR4_TCRM_DEFVAL 
+#undef DDR_PHY_MR4_TCRM_SHIFT 
+#undef DDR_PHY_MR4_TCRM_MASK 
+#define DDR_PHY_MR4_TCRM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_TCRM_SHIFT                                                     3
+#define DDR_PHY_MR4_TCRM_MASK                                                      0x00000008U
+
+/*Temperature Controlled Refresh Range*/
+#undef DDR_PHY_MR4_TCRR_DEFVAL 
+#undef DDR_PHY_MR4_TCRR_SHIFT 
+#undef DDR_PHY_MR4_TCRR_MASK 
+#define DDR_PHY_MR4_TCRR_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_TCRR_SHIFT                                                     2
+#define DDR_PHY_MR4_TCRR_MASK                                                      0x00000004U
+
+/*Maximum Power Down Mode*/
+#undef DDR_PHY_MR4_MPDM_DEFVAL 
+#undef DDR_PHY_MR4_MPDM_SHIFT 
+#undef DDR_PHY_MR4_MPDM_MASK 
+#define DDR_PHY_MR4_MPDM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR4_MPDM_SHIFT                                                     1
+#define DDR_PHY_MR4_MPDM_MASK                                                      0x00000002U
+
+/*This is a JEDEC reserved bit and is recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR4_RSVD_0_DEFVAL 
+#undef DDR_PHY_MR4_RSVD_0_SHIFT 
+#undef DDR_PHY_MR4_RSVD_0_MASK 
+#define DDR_PHY_MR4_RSVD_0_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR4_RSVD_0_SHIFT                                                   0
+#define DDR_PHY_MR4_RSVD_0_MASK                                                    0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR5_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_MR5_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_MR5_RESERVED_31_16_MASK 
+#define DDR_PHY_MR5_RESERVED_31_16_DEFVAL                                          0x00000000
+#define DDR_PHY_MR5_RESERVED_31_16_SHIFT                                           16
+#define DDR_PHY_MR5_RESERVED_31_16_MASK                                            0xFFFF0000U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR5_RSVD_DEFVAL 
+#undef DDR_PHY_MR5_RSVD_SHIFT 
+#undef DDR_PHY_MR5_RSVD_MASK 
+#define DDR_PHY_MR5_RSVD_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_RSVD_SHIFT                                                     13
+#define DDR_PHY_MR5_RSVD_MASK                                                      0x0000E000U
+
+/*Read DBI*/
+#undef DDR_PHY_MR5_RDBI_DEFVAL 
+#undef DDR_PHY_MR5_RDBI_SHIFT 
+#undef DDR_PHY_MR5_RDBI_MASK 
+#define DDR_PHY_MR5_RDBI_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_RDBI_SHIFT                                                     12
+#define DDR_PHY_MR5_RDBI_MASK                                                      0x00001000U
+
+/*Write DBI*/
+#undef DDR_PHY_MR5_WDBI_DEFVAL 
+#undef DDR_PHY_MR5_WDBI_SHIFT 
+#undef DDR_PHY_MR5_WDBI_MASK 
+#define DDR_PHY_MR5_WDBI_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_WDBI_SHIFT                                                     11
+#define DDR_PHY_MR5_WDBI_MASK                                                      0x00000800U
+
+/*Data Mask*/
+#undef DDR_PHY_MR5_DM_DEFVAL 
+#undef DDR_PHY_MR5_DM_SHIFT 
+#undef DDR_PHY_MR5_DM_MASK 
+#define DDR_PHY_MR5_DM_DEFVAL                                                      0x00000000
+#define DDR_PHY_MR5_DM_SHIFT                                                       10
+#define DDR_PHY_MR5_DM_MASK                                                        0x00000400U
+
+/*CA Parity Persistent Error*/
+#undef DDR_PHY_MR5_CAPPE_DEFVAL 
+#undef DDR_PHY_MR5_CAPPE_SHIFT 
+#undef DDR_PHY_MR5_CAPPE_MASK 
+#define DDR_PHY_MR5_CAPPE_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR5_CAPPE_SHIFT                                                    9
+#define DDR_PHY_MR5_CAPPE_MASK                                                     0x00000200U
+
+/*RTT_PARK*/
+#undef DDR_PHY_MR5_RTTPARK_DEFVAL 
+#undef DDR_PHY_MR5_RTTPARK_SHIFT 
+#undef DDR_PHY_MR5_RTTPARK_MASK 
+#define DDR_PHY_MR5_RTTPARK_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR5_RTTPARK_SHIFT                                                  6
+#define DDR_PHY_MR5_RTTPARK_MASK                                                   0x000001C0U
+
+/*ODT Input Buffer during Power Down mode*/
+#undef DDR_PHY_MR5_ODTIBPD_DEFVAL 
+#undef DDR_PHY_MR5_ODTIBPD_SHIFT 
+#undef DDR_PHY_MR5_ODTIBPD_MASK 
+#define DDR_PHY_MR5_ODTIBPD_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR5_ODTIBPD_SHIFT                                                  5
+#define DDR_PHY_MR5_ODTIBPD_MASK                                                   0x00000020U
+
+/*C/A Parity Error Status*/
+#undef DDR_PHY_MR5_CAPES_DEFVAL 
+#undef DDR_PHY_MR5_CAPES_SHIFT 
+#undef DDR_PHY_MR5_CAPES_MASK 
+#define DDR_PHY_MR5_CAPES_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR5_CAPES_SHIFT                                                    4
+#define DDR_PHY_MR5_CAPES_MASK                                                     0x00000010U
+
+/*CRC Error Clear*/
+#undef DDR_PHY_MR5_CRCEC_DEFVAL 
+#undef DDR_PHY_MR5_CRCEC_SHIFT 
+#undef DDR_PHY_MR5_CRCEC_MASK 
+#define DDR_PHY_MR5_CRCEC_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR5_CRCEC_SHIFT                                                    3
+#define DDR_PHY_MR5_CRCEC_MASK                                                     0x00000008U
+
+/*C/A Parity Latency Mode*/
+#undef DDR_PHY_MR5_CAPM_DEFVAL 
+#undef DDR_PHY_MR5_CAPM_SHIFT 
+#undef DDR_PHY_MR5_CAPM_MASK 
+#define DDR_PHY_MR5_CAPM_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR5_CAPM_SHIFT                                                     0
+#define DDR_PHY_MR5_CAPM_MASK                                                      0x00000007U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR6_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_MR6_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_MR6_RESERVED_31_16_MASK 
+#define DDR_PHY_MR6_RESERVED_31_16_DEFVAL                                          0x00000000
+#define DDR_PHY_MR6_RESERVED_31_16_SHIFT                                           16
+#define DDR_PHY_MR6_RESERVED_31_16_MASK                                            0xFFFF0000U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR6_RSVD_15_13_DEFVAL 
+#undef DDR_PHY_MR6_RSVD_15_13_SHIFT 
+#undef DDR_PHY_MR6_RSVD_15_13_MASK 
+#define DDR_PHY_MR6_RSVD_15_13_DEFVAL                                              0x00000000
+#define DDR_PHY_MR6_RSVD_15_13_SHIFT                                               13
+#define DDR_PHY_MR6_RSVD_15_13_MASK                                                0x0000E000U
+
+/*CAS_n to CAS_n command delay for same bank group (tCCD_L)*/
+#undef DDR_PHY_MR6_TCCDL_DEFVAL 
+#undef DDR_PHY_MR6_TCCDL_SHIFT 
+#undef DDR_PHY_MR6_TCCDL_MASK 
+#define DDR_PHY_MR6_TCCDL_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR6_TCCDL_SHIFT                                                    10
+#define DDR_PHY_MR6_TCCDL_MASK                                                     0x00001C00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR6_RSVD_9_8_DEFVAL 
+#undef DDR_PHY_MR6_RSVD_9_8_SHIFT 
+#undef DDR_PHY_MR6_RSVD_9_8_MASK 
+#define DDR_PHY_MR6_RSVD_9_8_DEFVAL                                                0x00000000
+#define DDR_PHY_MR6_RSVD_9_8_SHIFT                                                 8
+#define DDR_PHY_MR6_RSVD_9_8_MASK                                                  0x00000300U
+
+/*VrefDQ Training Enable*/
+#undef DDR_PHY_MR6_VDDQTEN_DEFVAL 
+#undef DDR_PHY_MR6_VDDQTEN_SHIFT 
+#undef DDR_PHY_MR6_VDDQTEN_MASK 
+#define DDR_PHY_MR6_VDDQTEN_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR6_VDDQTEN_SHIFT                                                  7
+#define DDR_PHY_MR6_VDDQTEN_MASK                                                   0x00000080U
+
+/*VrefDQ Training Range*/
+#undef DDR_PHY_MR6_VDQTRG_DEFVAL 
+#undef DDR_PHY_MR6_VDQTRG_SHIFT 
+#undef DDR_PHY_MR6_VDQTRG_MASK 
+#define DDR_PHY_MR6_VDQTRG_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR6_VDQTRG_SHIFT                                                   6
+#define DDR_PHY_MR6_VDQTRG_MASK                                                    0x00000040U
+
+/*VrefDQ Training Values*/
+#undef DDR_PHY_MR6_VDQTVAL_DEFVAL 
+#undef DDR_PHY_MR6_VDQTVAL_SHIFT 
+#undef DDR_PHY_MR6_VDQTVAL_MASK 
+#define DDR_PHY_MR6_VDQTVAL_DEFVAL                                                 0x00000000
+#define DDR_PHY_MR6_VDQTVAL_SHIFT                                                  0
+#define DDR_PHY_MR6_VDQTVAL_MASK                                                   0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR11_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR11_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR11_RESERVED_31_8_MASK 
+#define DDR_PHY_MR11_RESERVED_31_8_DEFVAL                                          0x00000000
+#define DDR_PHY_MR11_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR11_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR11_RSVD_DEFVAL 
+#undef DDR_PHY_MR11_RSVD_SHIFT 
+#undef DDR_PHY_MR11_RSVD_MASK 
+#define DDR_PHY_MR11_RSVD_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR11_RSVD_SHIFT                                                    3
+#define DDR_PHY_MR11_RSVD_MASK                                                     0x000000F8U
+
+/*Power Down Control*/
+#undef DDR_PHY_MR11_PDCTL_DEFVAL 
+#undef DDR_PHY_MR11_PDCTL_SHIFT 
+#undef DDR_PHY_MR11_PDCTL_MASK 
+#define DDR_PHY_MR11_PDCTL_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR11_PDCTL_SHIFT                                                   2
+#define DDR_PHY_MR11_PDCTL_MASK                                                    0x00000004U
+
+/*DQ Bus Receiver On-Die-Termination*/
+#undef DDR_PHY_MR11_DQODT_DEFVAL 
+#undef DDR_PHY_MR11_DQODT_SHIFT 
+#undef DDR_PHY_MR11_DQODT_MASK 
+#define DDR_PHY_MR11_DQODT_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR11_DQODT_SHIFT                                                   0
+#define DDR_PHY_MR11_DQODT_MASK                                                    0x00000003U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR12_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR12_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR12_RESERVED_31_8_MASK 
+#define DDR_PHY_MR12_RESERVED_31_8_DEFVAL                                          0x0000004D
+#define DDR_PHY_MR12_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR12_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR12_RSVD_DEFVAL 
+#undef DDR_PHY_MR12_RSVD_SHIFT 
+#undef DDR_PHY_MR12_RSVD_MASK 
+#define DDR_PHY_MR12_RSVD_DEFVAL                                                   0x0000004D
+#define DDR_PHY_MR12_RSVD_SHIFT                                                    7
+#define DDR_PHY_MR12_RSVD_MASK                                                     0x00000080U
+
+/*VREF_CA Range Select.*/
+#undef DDR_PHY_MR12_VR_CA_DEFVAL 
+#undef DDR_PHY_MR12_VR_CA_SHIFT 
+#undef DDR_PHY_MR12_VR_CA_MASK 
+#define DDR_PHY_MR12_VR_CA_DEFVAL                                                  0x0000004D
+#define DDR_PHY_MR12_VR_CA_SHIFT                                                   6
+#define DDR_PHY_MR12_VR_CA_MASK                                                    0x00000040U
+
+/*Controls the VREF(ca) levels for Frequency-Set-Point[1:0].*/
+#undef DDR_PHY_MR12_VREF_CA_DEFVAL 
+#undef DDR_PHY_MR12_VREF_CA_SHIFT 
+#undef DDR_PHY_MR12_VREF_CA_MASK 
+#define DDR_PHY_MR12_VREF_CA_DEFVAL                                                0x0000004D
+#define DDR_PHY_MR12_VREF_CA_SHIFT                                                 0
+#define DDR_PHY_MR12_VREF_CA_MASK                                                  0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR13_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR13_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR13_RESERVED_31_8_MASK 
+#define DDR_PHY_MR13_RESERVED_31_8_DEFVAL                                          0x00000000
+#define DDR_PHY_MR13_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR13_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*Frequency Set Point Operation Mode*/
+#undef DDR_PHY_MR13_FSPOP_DEFVAL 
+#undef DDR_PHY_MR13_FSPOP_SHIFT 
+#undef DDR_PHY_MR13_FSPOP_MASK 
+#define DDR_PHY_MR13_FSPOP_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR13_FSPOP_SHIFT                                                   7
+#define DDR_PHY_MR13_FSPOP_MASK                                                    0x00000080U
+
+/*Frequency Set Point Write Enable*/
+#undef DDR_PHY_MR13_FSPWR_DEFVAL 
+#undef DDR_PHY_MR13_FSPWR_SHIFT 
+#undef DDR_PHY_MR13_FSPWR_MASK 
+#define DDR_PHY_MR13_FSPWR_DEFVAL                                                  0x00000000
+#define DDR_PHY_MR13_FSPWR_SHIFT                                                   6
+#define DDR_PHY_MR13_FSPWR_MASK                                                    0x00000040U
+
+/*Data Mask Enable*/
+#undef DDR_PHY_MR13_DMD_DEFVAL 
+#undef DDR_PHY_MR13_DMD_SHIFT 
+#undef DDR_PHY_MR13_DMD_MASK 
+#define DDR_PHY_MR13_DMD_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_DMD_SHIFT                                                     5
+#define DDR_PHY_MR13_DMD_MASK                                                      0x00000020U
+
+/*Refresh Rate Option*/
+#undef DDR_PHY_MR13_RRO_DEFVAL 
+#undef DDR_PHY_MR13_RRO_SHIFT 
+#undef DDR_PHY_MR13_RRO_MASK 
+#define DDR_PHY_MR13_RRO_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_RRO_SHIFT                                                     4
+#define DDR_PHY_MR13_RRO_MASK                                                      0x00000010U
+
+/*VREF Current Generator*/
+#undef DDR_PHY_MR13_VRCG_DEFVAL 
+#undef DDR_PHY_MR13_VRCG_SHIFT 
+#undef DDR_PHY_MR13_VRCG_MASK 
+#define DDR_PHY_MR13_VRCG_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR13_VRCG_SHIFT                                                    3
+#define DDR_PHY_MR13_VRCG_MASK                                                     0x00000008U
+
+/*VREF Output*/
+#undef DDR_PHY_MR13_VRO_DEFVAL 
+#undef DDR_PHY_MR13_VRO_SHIFT 
+#undef DDR_PHY_MR13_VRO_MASK 
+#define DDR_PHY_MR13_VRO_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_VRO_SHIFT                                                     2
+#define DDR_PHY_MR13_VRO_MASK                                                      0x00000004U
+
+/*Read Preamble Training Mode*/
+#undef DDR_PHY_MR13_RPT_DEFVAL 
+#undef DDR_PHY_MR13_RPT_SHIFT 
+#undef DDR_PHY_MR13_RPT_MASK 
+#define DDR_PHY_MR13_RPT_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_RPT_SHIFT                                                     1
+#define DDR_PHY_MR13_RPT_MASK                                                      0x00000002U
+
+/*Command Bus Training*/
+#undef DDR_PHY_MR13_CBT_DEFVAL 
+#undef DDR_PHY_MR13_CBT_SHIFT 
+#undef DDR_PHY_MR13_CBT_MASK 
+#define DDR_PHY_MR13_CBT_DEFVAL                                                    0x00000000
+#define DDR_PHY_MR13_CBT_SHIFT                                                     0
+#define DDR_PHY_MR13_CBT_MASK                                                      0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR14_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR14_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR14_RESERVED_31_8_MASK 
+#define DDR_PHY_MR14_RESERVED_31_8_DEFVAL                                          0x0000004D
+#define DDR_PHY_MR14_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR14_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR14_RSVD_DEFVAL 
+#undef DDR_PHY_MR14_RSVD_SHIFT 
+#undef DDR_PHY_MR14_RSVD_MASK 
+#define DDR_PHY_MR14_RSVD_DEFVAL                                                   0x0000004D
+#define DDR_PHY_MR14_RSVD_SHIFT                                                    7
+#define DDR_PHY_MR14_RSVD_MASK                                                     0x00000080U
+
+/*VREFDQ Range Selects.*/
+#undef DDR_PHY_MR14_VR_DQ_DEFVAL 
+#undef DDR_PHY_MR14_VR_DQ_SHIFT 
+#undef DDR_PHY_MR14_VR_DQ_MASK 
+#define DDR_PHY_MR14_VR_DQ_DEFVAL                                                  0x0000004D
+#define DDR_PHY_MR14_VR_DQ_SHIFT                                                   6
+#define DDR_PHY_MR14_VR_DQ_MASK                                                    0x00000040U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR14_VREF_DQ_DEFVAL 
+#undef DDR_PHY_MR14_VREF_DQ_SHIFT 
+#undef DDR_PHY_MR14_VREF_DQ_MASK 
+#define DDR_PHY_MR14_VREF_DQ_DEFVAL                                                0x0000004D
+#define DDR_PHY_MR14_VREF_DQ_SHIFT                                                 0
+#define DDR_PHY_MR14_VREF_DQ_MASK                                                  0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_MR22_RESERVED_31_8_DEFVAL 
+#undef DDR_PHY_MR22_RESERVED_31_8_SHIFT 
+#undef DDR_PHY_MR22_RESERVED_31_8_MASK 
+#define DDR_PHY_MR22_RESERVED_31_8_DEFVAL                                          0x00000000
+#define DDR_PHY_MR22_RESERVED_31_8_SHIFT                                           8
+#define DDR_PHY_MR22_RESERVED_31_8_MASK                                            0xFFFFFF00U
+
+/*These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.*/
+#undef DDR_PHY_MR22_RSVD_DEFVAL 
+#undef DDR_PHY_MR22_RSVD_SHIFT 
+#undef DDR_PHY_MR22_RSVD_MASK 
+#define DDR_PHY_MR22_RSVD_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR22_RSVD_SHIFT                                                    6
+#define DDR_PHY_MR22_RSVD_MASK                                                     0x000000C0U
+
+/*CA ODT termination disable.*/
+#undef DDR_PHY_MR22_ODTD_CA_DEFVAL 
+#undef DDR_PHY_MR22_ODTD_CA_SHIFT 
+#undef DDR_PHY_MR22_ODTD_CA_MASK 
+#define DDR_PHY_MR22_ODTD_CA_DEFVAL                                                0x00000000
+#define DDR_PHY_MR22_ODTD_CA_SHIFT                                                 5
+#define DDR_PHY_MR22_ODTD_CA_MASK                                                  0x00000020U
+
+/*ODT CS override.*/
+#undef DDR_PHY_MR22_ODTE_CS_DEFVAL 
+#undef DDR_PHY_MR22_ODTE_CS_SHIFT 
+#undef DDR_PHY_MR22_ODTE_CS_MASK 
+#define DDR_PHY_MR22_ODTE_CS_DEFVAL                                                0x00000000
+#define DDR_PHY_MR22_ODTE_CS_SHIFT                                                 4
+#define DDR_PHY_MR22_ODTE_CS_MASK                                                  0x00000010U
+
+/*ODT CK override.*/
+#undef DDR_PHY_MR22_ODTE_CK_DEFVAL 
+#undef DDR_PHY_MR22_ODTE_CK_SHIFT 
+#undef DDR_PHY_MR22_ODTE_CK_MASK 
+#define DDR_PHY_MR22_ODTE_CK_DEFVAL                                                0x00000000
+#define DDR_PHY_MR22_ODTE_CK_SHIFT                                                 3
+#define DDR_PHY_MR22_ODTE_CK_MASK                                                  0x00000008U
+
+/*Controller ODT value for VOH calibration.*/
+#undef DDR_PHY_MR22_CODT_DEFVAL 
+#undef DDR_PHY_MR22_CODT_SHIFT 
+#undef DDR_PHY_MR22_CODT_MASK 
+#define DDR_PHY_MR22_CODT_DEFVAL                                                   0x00000000
+#define DDR_PHY_MR22_CODT_SHIFT                                                    0
+#define DDR_PHY_MR22_CODT_MASK                                                     0x00000007U
+
+/*Refresh During Training*/
+#undef DDR_PHY_DTCR0_RFSHDT_DEFVAL 
+#undef DDR_PHY_DTCR0_RFSHDT_SHIFT 
+#undef DDR_PHY_DTCR0_RFSHDT_MASK 
+#define DDR_PHY_DTCR0_RFSHDT_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_RFSHDT_SHIFT                                                 28
+#define DDR_PHY_DTCR0_RFSHDT_MASK                                                  0xF0000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR0_RESERVED_27_26_DEFVAL 
+#undef DDR_PHY_DTCR0_RESERVED_27_26_SHIFT 
+#undef DDR_PHY_DTCR0_RESERVED_27_26_MASK 
+#define DDR_PHY_DTCR0_RESERVED_27_26_DEFVAL                                        0x800091C7
+#define DDR_PHY_DTCR0_RESERVED_27_26_SHIFT                                         26
+#define DDR_PHY_DTCR0_RESERVED_27_26_MASK                                          0x0C000000U
+
+/*Data Training Debug Rank Select*/
+#undef DDR_PHY_DTCR0_DTDRS_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDRS_SHIFT 
+#undef DDR_PHY_DTCR0_DTDRS_MASK 
+#define DDR_PHY_DTCR0_DTDRS_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTDRS_SHIFT                                                  24
+#define DDR_PHY_DTCR0_DTDRS_MASK                                                   0x03000000U
+
+/*Data Training with Early/Extended Gate*/
+#undef DDR_PHY_DTCR0_DTEXG_DEFVAL 
+#undef DDR_PHY_DTCR0_DTEXG_SHIFT 
+#undef DDR_PHY_DTCR0_DTEXG_MASK 
+#define DDR_PHY_DTCR0_DTEXG_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTEXG_SHIFT                                                  23
+#define DDR_PHY_DTCR0_DTEXG_MASK                                                   0x00800000U
+
+/*Data Training Extended Write DQS*/
+#undef DDR_PHY_DTCR0_DTEXD_DEFVAL 
+#undef DDR_PHY_DTCR0_DTEXD_SHIFT 
+#undef DDR_PHY_DTCR0_DTEXD_MASK 
+#define DDR_PHY_DTCR0_DTEXD_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTEXD_SHIFT                                                  22
+#define DDR_PHY_DTCR0_DTEXD_MASK                                                   0x00400000U
+
+/*Data Training Debug Step*/
+#undef DDR_PHY_DTCR0_DTDSTP_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDSTP_SHIFT 
+#undef DDR_PHY_DTCR0_DTDSTP_MASK 
+#define DDR_PHY_DTCR0_DTDSTP_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_DTDSTP_SHIFT                                                 21
+#define DDR_PHY_DTCR0_DTDSTP_MASK                                                  0x00200000U
+
+/*Data Training Debug Enable*/
+#undef DDR_PHY_DTCR0_DTDEN_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDEN_SHIFT 
+#undef DDR_PHY_DTCR0_DTDEN_MASK 
+#define DDR_PHY_DTCR0_DTDEN_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTDEN_SHIFT                                                  20
+#define DDR_PHY_DTCR0_DTDEN_MASK                                                   0x00100000U
+
+/*Data Training Debug Byte Select*/
+#undef DDR_PHY_DTCR0_DTDBS_DEFVAL 
+#undef DDR_PHY_DTCR0_DTDBS_SHIFT 
+#undef DDR_PHY_DTCR0_DTDBS_MASK 
+#define DDR_PHY_DTCR0_DTDBS_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTDBS_SHIFT                                                  16
+#define DDR_PHY_DTCR0_DTDBS_MASK                                                   0x000F0000U
+
+/*Data Training read DBI deskewing configuration*/
+#undef DDR_PHY_DTCR0_DTRDBITR_DEFVAL 
+#undef DDR_PHY_DTCR0_DTRDBITR_SHIFT 
+#undef DDR_PHY_DTCR0_DTRDBITR_MASK 
+#define DDR_PHY_DTCR0_DTRDBITR_DEFVAL                                              0x800091C7
+#define DDR_PHY_DTCR0_DTRDBITR_SHIFT                                               14
+#define DDR_PHY_DTCR0_DTRDBITR_MASK                                                0x0000C000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR0_RESERVED_13_DEFVAL 
+#undef DDR_PHY_DTCR0_RESERVED_13_SHIFT 
+#undef DDR_PHY_DTCR0_RESERVED_13_MASK 
+#define DDR_PHY_DTCR0_RESERVED_13_DEFVAL                                           0x800091C7
+#define DDR_PHY_DTCR0_RESERVED_13_SHIFT                                            13
+#define DDR_PHY_DTCR0_RESERVED_13_MASK                                             0x00002000U
+
+/*Data Training Write Bit Deskew Data Mask*/
+#undef DDR_PHY_DTCR0_DTWBDDM_DEFVAL 
+#undef DDR_PHY_DTCR0_DTWBDDM_SHIFT 
+#undef DDR_PHY_DTCR0_DTWBDDM_MASK 
+#define DDR_PHY_DTCR0_DTWBDDM_DEFVAL                                               0x800091C7
+#define DDR_PHY_DTCR0_DTWBDDM_SHIFT                                                12
+#define DDR_PHY_DTCR0_DTWBDDM_MASK                                                 0x00001000U
+
+/*Refreshes Issued During Entry to Training*/
+#undef DDR_PHY_DTCR0_RFSHEN_DEFVAL 
+#undef DDR_PHY_DTCR0_RFSHEN_SHIFT 
+#undef DDR_PHY_DTCR0_RFSHEN_MASK 
+#define DDR_PHY_DTCR0_RFSHEN_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_RFSHEN_SHIFT                                                 8
+#define DDR_PHY_DTCR0_RFSHEN_MASK                                                  0x00000F00U
+
+/*Data Training Compare Data*/
+#undef DDR_PHY_DTCR0_DTCMPD_DEFVAL 
+#undef DDR_PHY_DTCR0_DTCMPD_SHIFT 
+#undef DDR_PHY_DTCR0_DTCMPD_MASK 
+#define DDR_PHY_DTCR0_DTCMPD_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_DTCMPD_SHIFT                                                 7
+#define DDR_PHY_DTCR0_DTCMPD_MASK                                                  0x00000080U
+
+/*Data Training Using MPR*/
+#undef DDR_PHY_DTCR0_DTMPR_DEFVAL 
+#undef DDR_PHY_DTCR0_DTMPR_SHIFT 
+#undef DDR_PHY_DTCR0_DTMPR_MASK 
+#define DDR_PHY_DTCR0_DTMPR_DEFVAL                                                 0x800091C7
+#define DDR_PHY_DTCR0_DTMPR_SHIFT                                                  6
+#define DDR_PHY_DTCR0_DTMPR_MASK                                                   0x00000040U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR0_RESERVED_5_4_DEFVAL 
+#undef DDR_PHY_DTCR0_RESERVED_5_4_SHIFT 
+#undef DDR_PHY_DTCR0_RESERVED_5_4_MASK 
+#define DDR_PHY_DTCR0_RESERVED_5_4_DEFVAL                                          0x800091C7
+#define DDR_PHY_DTCR0_RESERVED_5_4_SHIFT                                           4
+#define DDR_PHY_DTCR0_RESERVED_5_4_MASK                                            0x00000030U
+
+/*Data Training Repeat Number*/
+#undef DDR_PHY_DTCR0_DTRPTN_DEFVAL 
+#undef DDR_PHY_DTCR0_DTRPTN_SHIFT 
+#undef DDR_PHY_DTCR0_DTRPTN_MASK 
+#define DDR_PHY_DTCR0_DTRPTN_DEFVAL                                                0x800091C7
+#define DDR_PHY_DTCR0_DTRPTN_SHIFT                                                 0
+#define DDR_PHY_DTCR0_DTRPTN_MASK                                                  0x0000000FU
+
+/*Rank Enable.*/
+#undef DDR_PHY_DTCR1_RANKEN_RSVD_DEFVAL 
+#undef DDR_PHY_DTCR1_RANKEN_RSVD_SHIFT 
+#undef DDR_PHY_DTCR1_RANKEN_RSVD_MASK 
+#define DDR_PHY_DTCR1_RANKEN_RSVD_DEFVAL                                           0x00030237
+#define DDR_PHY_DTCR1_RANKEN_RSVD_SHIFT                                            18
+#define DDR_PHY_DTCR1_RANKEN_RSVD_MASK                                             0xFFFC0000U
+
+/*Rank Enable.*/
+#undef DDR_PHY_DTCR1_RANKEN_DEFVAL 
+#undef DDR_PHY_DTCR1_RANKEN_SHIFT 
+#undef DDR_PHY_DTCR1_RANKEN_MASK 
+#define DDR_PHY_DTCR1_RANKEN_DEFVAL                                                0x00030237
+#define DDR_PHY_DTCR1_RANKEN_SHIFT                                                 16
+#define DDR_PHY_DTCR1_RANKEN_MASK                                                  0x00030000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_15_14_MASK 
+#define DDR_PHY_DTCR1_RESERVED_15_14_DEFVAL                                        0x00030237
+#define DDR_PHY_DTCR1_RESERVED_15_14_SHIFT                                         14
+#define DDR_PHY_DTCR1_RESERVED_15_14_MASK                                          0x0000C000U
+
+/*Data Training Rank*/
+#undef DDR_PHY_DTCR1_DTRANK_DEFVAL 
+#undef DDR_PHY_DTCR1_DTRANK_SHIFT 
+#undef DDR_PHY_DTCR1_DTRANK_MASK 
+#define DDR_PHY_DTCR1_DTRANK_DEFVAL                                                0x00030237
+#define DDR_PHY_DTCR1_DTRANK_SHIFT                                                 12
+#define DDR_PHY_DTCR1_DTRANK_MASK                                                  0x00003000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_11_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_11_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_11_MASK 
+#define DDR_PHY_DTCR1_RESERVED_11_DEFVAL                                           0x00030237
+#define DDR_PHY_DTCR1_RESERVED_11_SHIFT                                            11
+#define DDR_PHY_DTCR1_RESERVED_11_MASK                                             0x00000800U
+
+/*Read Leveling Gate Sampling Difference*/
+#undef DDR_PHY_DTCR1_RDLVLGDIFF_DEFVAL 
+#undef DDR_PHY_DTCR1_RDLVLGDIFF_SHIFT 
+#undef DDR_PHY_DTCR1_RDLVLGDIFF_MASK 
+#define DDR_PHY_DTCR1_RDLVLGDIFF_DEFVAL                                            0x00030237
+#define DDR_PHY_DTCR1_RDLVLGDIFF_SHIFT                                             8
+#define DDR_PHY_DTCR1_RDLVLGDIFF_MASK                                              0x00000700U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_7_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_7_MASK 
+#define DDR_PHY_DTCR1_RESERVED_7_DEFVAL                                            0x00030237
+#define DDR_PHY_DTCR1_RESERVED_7_SHIFT                                             7
+#define DDR_PHY_DTCR1_RESERVED_7_MASK                                              0x00000080U
+
+/*Read Leveling Gate Shift*/
+#undef DDR_PHY_DTCR1_RDLVLGS_DEFVAL 
+#undef DDR_PHY_DTCR1_RDLVLGS_SHIFT 
+#undef DDR_PHY_DTCR1_RDLVLGS_MASK 
+#define DDR_PHY_DTCR1_RDLVLGS_DEFVAL                                               0x00030237
+#define DDR_PHY_DTCR1_RDLVLGS_SHIFT                                                4
+#define DDR_PHY_DTCR1_RDLVLGS_MASK                                                 0x00000070U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DTCR1_RESERVED_3_DEFVAL 
+#undef DDR_PHY_DTCR1_RESERVED_3_SHIFT 
+#undef DDR_PHY_DTCR1_RESERVED_3_MASK 
+#define DDR_PHY_DTCR1_RESERVED_3_DEFVAL                                            0x00030237
+#define DDR_PHY_DTCR1_RESERVED_3_SHIFT                                             3
+#define DDR_PHY_DTCR1_RESERVED_3_MASK                                              0x00000008U
+
+/*Read Preamble Training enable*/
+#undef DDR_PHY_DTCR1_RDPRMVL_TRN_DEFVAL 
+#undef DDR_PHY_DTCR1_RDPRMVL_TRN_SHIFT 
+#undef DDR_PHY_DTCR1_RDPRMVL_TRN_MASK 
+#define DDR_PHY_DTCR1_RDPRMVL_TRN_DEFVAL                                           0x00030237
+#define DDR_PHY_DTCR1_RDPRMVL_TRN_SHIFT                                            2
+#define DDR_PHY_DTCR1_RDPRMVL_TRN_MASK                                             0x00000004U
+
+/*Read Leveling Enable*/
+#undef DDR_PHY_DTCR1_RDLVLEN_DEFVAL 
+#undef DDR_PHY_DTCR1_RDLVLEN_SHIFT 
+#undef DDR_PHY_DTCR1_RDLVLEN_MASK 
+#define DDR_PHY_DTCR1_RDLVLEN_DEFVAL                                               0x00030237
+#define DDR_PHY_DTCR1_RDLVLEN_SHIFT                                                1
+#define DDR_PHY_DTCR1_RDLVLEN_MASK                                                 0x00000002U
+
+/*Basic Gate Training Enable*/
+#undef DDR_PHY_DTCR1_BSTEN_DEFVAL 
+#undef DDR_PHY_DTCR1_BSTEN_SHIFT 
+#undef DDR_PHY_DTCR1_BSTEN_MASK 
+#define DDR_PHY_DTCR1_BSTEN_DEFVAL                                                 0x00030237
+#define DDR_PHY_DTCR1_BSTEN_SHIFT                                                  0
+#define DDR_PHY_DTCR1_BSTEN_MASK                                                   0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_CATR0_RESERVED_31_21_DEFVAL 
+#undef DDR_PHY_CATR0_RESERVED_31_21_SHIFT 
+#undef DDR_PHY_CATR0_RESERVED_31_21_MASK 
+#define DDR_PHY_CATR0_RESERVED_31_21_DEFVAL                                        0x00141054
+#define DDR_PHY_CATR0_RESERVED_31_21_SHIFT                                         21
+#define DDR_PHY_CATR0_RESERVED_31_21_MASK                                          0xFFE00000U
+
+/*Minimum time (in terms of number of dram clocks) between two consectuve CA calibration command*/
+#undef DDR_PHY_CATR0_CACD_DEFVAL 
+#undef DDR_PHY_CATR0_CACD_SHIFT 
+#undef DDR_PHY_CATR0_CACD_MASK 
+#define DDR_PHY_CATR0_CACD_DEFVAL                                                  0x00141054
+#define DDR_PHY_CATR0_CACD_SHIFT                                                   16
+#define DDR_PHY_CATR0_CACD_MASK                                                    0x001F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_CATR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_CATR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_CATR0_RESERVED_15_13_MASK 
+#define DDR_PHY_CATR0_RESERVED_15_13_DEFVAL                                        0x00141054
+#define DDR_PHY_CATR0_RESERVED_15_13_SHIFT                                         13
+#define DDR_PHY_CATR0_RESERVED_15_13_MASK                                          0x0000E000U
+
+/*Minimum time (in terms of number of dram clocks) PUB should wait before sampling the CA response after Calibration command ha
+		 been sent to the memory*/
+#undef DDR_PHY_CATR0_CAADR_DEFVAL 
+#undef DDR_PHY_CATR0_CAADR_SHIFT 
+#undef DDR_PHY_CATR0_CAADR_MASK 
+#define DDR_PHY_CATR0_CAADR_DEFVAL                                                 0x00141054
+#define DDR_PHY_CATR0_CAADR_SHIFT                                                  8
+#define DDR_PHY_CATR0_CAADR_MASK                                                   0x00001F00U
+
+/*CA_1 Response Byte Lane 1*/
+#undef DDR_PHY_CATR0_CA1BYTE1_DEFVAL 
+#undef DDR_PHY_CATR0_CA1BYTE1_SHIFT 
+#undef DDR_PHY_CATR0_CA1BYTE1_MASK 
+#define DDR_PHY_CATR0_CA1BYTE1_DEFVAL                                              0x00141054
+#define DDR_PHY_CATR0_CA1BYTE1_SHIFT                                               4
+#define DDR_PHY_CATR0_CA1BYTE1_MASK                                                0x000000F0U
+
+/*CA_1 Response Byte Lane 0*/
+#undef DDR_PHY_CATR0_CA1BYTE0_DEFVAL 
+#undef DDR_PHY_CATR0_CA1BYTE0_SHIFT 
+#undef DDR_PHY_CATR0_CA1BYTE0_MASK 
+#define DDR_PHY_CATR0_CA1BYTE0_DEFVAL                                              0x00141054
+#define DDR_PHY_CATR0_CA1BYTE0_SHIFT                                               0
+#define DDR_PHY_CATR0_CA1BYTE0_MASK                                                0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_RIOCR5_RESERVED_31_16_DEFVAL 
+#undef DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT 
+#undef DDR_PHY_RIOCR5_RESERVED_31_16_MASK 
+#define DDR_PHY_RIOCR5_RESERVED_31_16_DEFVAL                                       0x00000005
+#define DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT                                        16
+#define DDR_PHY_RIOCR5_RESERVED_31_16_MASK                                         0xFFFF0000U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_RIOCR5_ODTOEMODE_RSVD_DEFVAL 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_RSVD_SHIFT 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_RSVD_MASK 
+#define DDR_PHY_RIOCR5_ODTOEMODE_RSVD_DEFVAL                                       0x00000005
+#define DDR_PHY_RIOCR5_ODTOEMODE_RSVD_SHIFT                                        4
+#define DDR_PHY_RIOCR5_ODTOEMODE_RSVD_MASK                                         0x0000FFF0U
+
+/*SDRAM On-die Termination Output Enable (OE) Mode Selection.*/
+#undef DDR_PHY_RIOCR5_ODTOEMODE_DEFVAL 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_SHIFT 
+#undef DDR_PHY_RIOCR5_ODTOEMODE_MASK 
+#define DDR_PHY_RIOCR5_ODTOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_RIOCR5_ODTOEMODE_SHIFT                                             0
+#define DDR_PHY_RIOCR5_ODTOEMODE_MASK                                              0x0000000FU
+
+/*Address/Command Slew Rate (D3F I/O Only)*/
+#undef DDR_PHY_ACIOCR0_ACSR_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACSR_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACSR_MASK 
+#define DDR_PHY_ACIOCR0_ACSR_DEFVAL                                                0x30000000
+#define DDR_PHY_ACIOCR0_ACSR_SHIFT                                                 30
+#define DDR_PHY_ACIOCR0_ACSR_MASK                                                  0xC0000000U
+
+/*SDRAM Reset I/O Mode*/
+#undef DDR_PHY_ACIOCR0_RSTIOM_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RSTIOM_SHIFT 
+#undef DDR_PHY_ACIOCR0_RSTIOM_MASK 
+#define DDR_PHY_ACIOCR0_RSTIOM_DEFVAL                                              0x30000000
+#define DDR_PHY_ACIOCR0_RSTIOM_SHIFT                                               29
+#define DDR_PHY_ACIOCR0_RSTIOM_MASK                                                0x20000000U
+
+/*SDRAM Reset Power Down Receiver*/
+#undef DDR_PHY_ACIOCR0_RSTPDR_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RSTPDR_SHIFT 
+#undef DDR_PHY_ACIOCR0_RSTPDR_MASK 
+#define DDR_PHY_ACIOCR0_RSTPDR_DEFVAL                                              0x30000000
+#define DDR_PHY_ACIOCR0_RSTPDR_SHIFT                                               28
+#define DDR_PHY_ACIOCR0_RSTPDR_MASK                                                0x10000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR0_RESERVED_27_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RESERVED_27_SHIFT 
+#undef DDR_PHY_ACIOCR0_RESERVED_27_MASK 
+#define DDR_PHY_ACIOCR0_RESERVED_27_DEFVAL                                         0x30000000
+#define DDR_PHY_ACIOCR0_RESERVED_27_SHIFT                                          27
+#define DDR_PHY_ACIOCR0_RESERVED_27_MASK                                           0x08000000U
+
+/*SDRAM Reset On-Die Termination*/
+#undef DDR_PHY_ACIOCR0_RSTODT_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RSTODT_SHIFT 
+#undef DDR_PHY_ACIOCR0_RSTODT_MASK 
+#define DDR_PHY_ACIOCR0_RSTODT_DEFVAL                                              0x30000000
+#define DDR_PHY_ACIOCR0_RSTODT_SHIFT                                               26
+#define DDR_PHY_ACIOCR0_RSTODT_MASK                                                0x04000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR0_RESERVED_25_10_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RESERVED_25_10_SHIFT 
+#undef DDR_PHY_ACIOCR0_RESERVED_25_10_MASK 
+#define DDR_PHY_ACIOCR0_RESERVED_25_10_DEFVAL                                      0x30000000
+#define DDR_PHY_ACIOCR0_RESERVED_25_10_SHIFT                                       10
+#define DDR_PHY_ACIOCR0_RESERVED_25_10_MASK                                        0x03FFFC00U
+
+/*CK Duty Cycle Correction*/
+#undef DDR_PHY_ACIOCR0_CKDCC_DEFVAL 
+#undef DDR_PHY_ACIOCR0_CKDCC_SHIFT 
+#undef DDR_PHY_ACIOCR0_CKDCC_MASK 
+#define DDR_PHY_ACIOCR0_CKDCC_DEFVAL                                               0x30000000
+#define DDR_PHY_ACIOCR0_CKDCC_SHIFT                                                6
+#define DDR_PHY_ACIOCR0_CKDCC_MASK                                                 0x000003C0U
+
+/*AC Power Down Receiver Mode*/
+#undef DDR_PHY_ACIOCR0_ACPDRMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACPDRMODE_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACPDRMODE_MASK 
+#define DDR_PHY_ACIOCR0_ACPDRMODE_DEFVAL                                           0x30000000
+#define DDR_PHY_ACIOCR0_ACPDRMODE_SHIFT                                            4
+#define DDR_PHY_ACIOCR0_ACPDRMODE_MASK                                             0x00000030U
+
+/*AC On-die Termination Mode*/
+#undef DDR_PHY_ACIOCR0_ACODTMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACODTMODE_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACODTMODE_MASK 
+#define DDR_PHY_ACIOCR0_ACODTMODE_DEFVAL                                           0x30000000
+#define DDR_PHY_ACIOCR0_ACODTMODE_SHIFT                                            2
+#define DDR_PHY_ACIOCR0_ACODTMODE_MASK                                             0x0000000CU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR0_RESERVED_1_DEFVAL 
+#undef DDR_PHY_ACIOCR0_RESERVED_1_SHIFT 
+#undef DDR_PHY_ACIOCR0_RESERVED_1_MASK 
+#define DDR_PHY_ACIOCR0_RESERVED_1_DEFVAL                                          0x30000000
+#define DDR_PHY_ACIOCR0_RESERVED_1_SHIFT                                           1
+#define DDR_PHY_ACIOCR0_RESERVED_1_MASK                                            0x00000002U
+
+/*Control delayed or non-delayed clock to CS_N/ODT?CKE AC slices.*/
+#undef DDR_PHY_ACIOCR0_ACRANKCLKSEL_DEFVAL 
+#undef DDR_PHY_ACIOCR0_ACRANKCLKSEL_SHIFT 
+#undef DDR_PHY_ACIOCR0_ACRANKCLKSEL_MASK 
+#define DDR_PHY_ACIOCR0_ACRANKCLKSEL_DEFVAL                                        0x30000000
+#define DDR_PHY_ACIOCR0_ACRANKCLKSEL_SHIFT                                         0
+#define DDR_PHY_ACIOCR0_ACRANKCLKSEL_MASK                                          0x00000001U
+
+/*Clock gating for glue logic inside CLKGEN and glue logic inside CONTROL slice*/
+#undef DDR_PHY_ACIOCR2_CLKGENCLKGATE_DEFVAL 
+#undef DDR_PHY_ACIOCR2_CLKGENCLKGATE_SHIFT 
+#undef DDR_PHY_ACIOCR2_CLKGENCLKGATE_MASK 
+#define DDR_PHY_ACIOCR2_CLKGENCLKGATE_DEFVAL                                       0x00000000
+#define DDR_PHY_ACIOCR2_CLKGENCLKGATE_SHIFT                                        31
+#define DDR_PHY_ACIOCR2_CLKGENCLKGATE_MASK                                         0x80000000U
+
+/*Clock gating for Output Enable D slices [0]*/
+#undef DDR_PHY_ACIOCR2_ACOECLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACOECLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACOECLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACOECLKGATE0_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR2_ACOECLKGATE0_SHIFT                                         30
+#define DDR_PHY_ACIOCR2_ACOECLKGATE0_MASK                                          0x40000000U
+
+/*Clock gating for Power Down Receiver D slices [0]*/
+#undef DDR_PHY_ACIOCR2_ACPDRCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACPDRCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACPDRCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACPDRCLKGATE0_DEFVAL                                       0x00000000
+#define DDR_PHY_ACIOCR2_ACPDRCLKGATE0_SHIFT                                        29
+#define DDR_PHY_ACIOCR2_ACPDRCLKGATE0_MASK                                         0x20000000U
+
+/*Clock gating for Termination Enable D slices [0]*/
+#undef DDR_PHY_ACIOCR2_ACTECLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACTECLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACTECLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACTECLKGATE0_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR2_ACTECLKGATE0_SHIFT                                         28
+#define DDR_PHY_ACIOCR2_ACTECLKGATE0_MASK                                          0x10000000U
+
+/*Clock gating for CK# D slices [1:0]*/
+#undef DDR_PHY_ACIOCR2_CKNCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_CKNCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_CKNCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_CKNCLKGATE0_DEFVAL                                         0x00000000
+#define DDR_PHY_ACIOCR2_CKNCLKGATE0_SHIFT                                          26
+#define DDR_PHY_ACIOCR2_CKNCLKGATE0_MASK                                           0x0C000000U
+
+/*Clock gating for CK D slices [1:0]*/
+#undef DDR_PHY_ACIOCR2_CKCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_CKCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_CKCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_CKCLKGATE0_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR2_CKCLKGATE0_SHIFT                                           24
+#define DDR_PHY_ACIOCR2_CKCLKGATE0_MASK                                            0x03000000U
+
+/*Clock gating for AC D slices [23:0]*/
+#undef DDR_PHY_ACIOCR2_ACCLKGATE0_DEFVAL 
+#undef DDR_PHY_ACIOCR2_ACCLKGATE0_SHIFT 
+#undef DDR_PHY_ACIOCR2_ACCLKGATE0_MASK 
+#define DDR_PHY_ACIOCR2_ACCLKGATE0_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR2_ACCLKGATE0_SHIFT                                           0
+#define DDR_PHY_ACIOCR2_ACCLKGATE0_MASK                                            0x00FFFFFFU
+
+/*SDRAM Parity Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_PAROEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_PAROEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_PAROEMODE_MASK 
+#define DDR_PHY_ACIOCR3_PAROEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_PAROEMODE_SHIFT                                            30
+#define DDR_PHY_ACIOCR3_PAROEMODE_MASK                                             0xC0000000U
+
+/*SDRAM Bank Group Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_BGOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_BGOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_BGOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_BGOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_ACIOCR3_BGOEMODE_SHIFT                                             26
+#define DDR_PHY_ACIOCR3_BGOEMODE_MASK                                              0x3C000000U
+
+/*SDRAM Bank Address Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_BAOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_BAOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_BAOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_BAOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_ACIOCR3_BAOEMODE_SHIFT                                             22
+#define DDR_PHY_ACIOCR3_BAOEMODE_MASK                                              0x03C00000U
+
+/*SDRAM A[17] Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_A17OEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_A17OEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_A17OEMODE_MASK 
+#define DDR_PHY_ACIOCR3_A17OEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_A17OEMODE_SHIFT                                            20
+#define DDR_PHY_ACIOCR3_A17OEMODE_MASK                                             0x00300000U
+
+/*SDRAM A[16] / RAS_n Output Enable (OE) Mode Selection*/
+#undef DDR_PHY_ACIOCR3_A16OEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_A16OEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_A16OEMODE_MASK 
+#define DDR_PHY_ACIOCR3_A16OEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_A16OEMODE_SHIFT                                            18
+#define DDR_PHY_ACIOCR3_A16OEMODE_MASK                                             0x000C0000U
+
+/*SDRAM ACT_n Output Enable (OE) Mode Selection (DDR4 only)*/
+#undef DDR_PHY_ACIOCR3_ACTOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_ACTOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_ACTOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_ACTOEMODE_DEFVAL                                           0x00000005
+#define DDR_PHY_ACIOCR3_ACTOEMODE_SHIFT                                            16
+#define DDR_PHY_ACIOCR3_ACTOEMODE_MASK                                             0x00030000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACIOCR3_RESERVED_15_8_DEFVAL 
+#undef DDR_PHY_ACIOCR3_RESERVED_15_8_SHIFT 
+#undef DDR_PHY_ACIOCR3_RESERVED_15_8_MASK 
+#define DDR_PHY_ACIOCR3_RESERVED_15_8_DEFVAL                                       0x00000005
+#define DDR_PHY_ACIOCR3_RESERVED_15_8_SHIFT                                        8
+#define DDR_PHY_ACIOCR3_RESERVED_15_8_MASK                                         0x0000FF00U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ACIOCR3_CKOEMODE_RSVD_DEFVAL 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_RSVD_SHIFT 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_RSVD_MASK 
+#define DDR_PHY_ACIOCR3_CKOEMODE_RSVD_DEFVAL                                       0x00000005
+#define DDR_PHY_ACIOCR3_CKOEMODE_RSVD_SHIFT                                        4
+#define DDR_PHY_ACIOCR3_CKOEMODE_RSVD_MASK                                         0x000000F0U
+
+/*SDRAM CK Output Enable (OE) Mode Selection.*/
+#undef DDR_PHY_ACIOCR3_CKOEMODE_DEFVAL 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_SHIFT 
+#undef DDR_PHY_ACIOCR3_CKOEMODE_MASK 
+#define DDR_PHY_ACIOCR3_CKOEMODE_DEFVAL                                            0x00000005
+#define DDR_PHY_ACIOCR3_CKOEMODE_SHIFT                                             0
+#define DDR_PHY_ACIOCR3_CKOEMODE_MASK                                              0x0000000FU
+
+/*Clock gating for AC LB slices and loopback read valid slices*/
+#undef DDR_PHY_ACIOCR4_LBCLKGATE_DEFVAL 
+#undef DDR_PHY_ACIOCR4_LBCLKGATE_SHIFT 
+#undef DDR_PHY_ACIOCR4_LBCLKGATE_MASK 
+#define DDR_PHY_ACIOCR4_LBCLKGATE_DEFVAL                                           0x00000000
+#define DDR_PHY_ACIOCR4_LBCLKGATE_SHIFT                                            31
+#define DDR_PHY_ACIOCR4_LBCLKGATE_MASK                                             0x80000000U
+
+/*Clock gating for Output Enable D slices [1]*/
+#undef DDR_PHY_ACIOCR4_ACOECLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACOECLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACOECLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACOECLKGATE1_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR4_ACOECLKGATE1_SHIFT                                         30
+#define DDR_PHY_ACIOCR4_ACOECLKGATE1_MASK                                          0x40000000U
+
+/*Clock gating for Power Down Receiver D slices [1]*/
+#undef DDR_PHY_ACIOCR4_ACPDRCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACPDRCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACPDRCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACPDRCLKGATE1_DEFVAL                                       0x00000000
+#define DDR_PHY_ACIOCR4_ACPDRCLKGATE1_SHIFT                                        29
+#define DDR_PHY_ACIOCR4_ACPDRCLKGATE1_MASK                                         0x20000000U
+
+/*Clock gating for Termination Enable D slices [1]*/
+#undef DDR_PHY_ACIOCR4_ACTECLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACTECLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACTECLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACTECLKGATE1_DEFVAL                                        0x00000000
+#define DDR_PHY_ACIOCR4_ACTECLKGATE1_SHIFT                                         28
+#define DDR_PHY_ACIOCR4_ACTECLKGATE1_MASK                                          0x10000000U
+
+/*Clock gating for CK# D slices [3:2]*/
+#undef DDR_PHY_ACIOCR4_CKNCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_CKNCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_CKNCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_CKNCLKGATE1_DEFVAL                                         0x00000000
+#define DDR_PHY_ACIOCR4_CKNCLKGATE1_SHIFT                                          26
+#define DDR_PHY_ACIOCR4_CKNCLKGATE1_MASK                                           0x0C000000U
+
+/*Clock gating for CK D slices [3:2]*/
+#undef DDR_PHY_ACIOCR4_CKCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_CKCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_CKCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_CKCLKGATE1_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR4_CKCLKGATE1_SHIFT                                           24
+#define DDR_PHY_ACIOCR4_CKCLKGATE1_MASK                                            0x03000000U
+
+/*Clock gating for AC D slices [47:24]*/
+#undef DDR_PHY_ACIOCR4_ACCLKGATE1_DEFVAL 
+#undef DDR_PHY_ACIOCR4_ACCLKGATE1_SHIFT 
+#undef DDR_PHY_ACIOCR4_ACCLKGATE1_MASK 
+#define DDR_PHY_ACIOCR4_ACCLKGATE1_DEFVAL                                          0x00000000
+#define DDR_PHY_ACIOCR4_ACCLKGATE1_SHIFT                                           0
+#define DDR_PHY_ACIOCR4_ACCLKGATE1_MASK                                            0x00FFFFFFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_IOVCR0_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_IOVCR0_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_IOVCR0_RESERVED_31_29_MASK 
+#define DDR_PHY_IOVCR0_RESERVED_31_29_DEFVAL                                       0x0F000000
+#define DDR_PHY_IOVCR0_RESERVED_31_29_SHIFT                                        29
+#define DDR_PHY_IOVCR0_RESERVED_31_29_MASK                                         0xE0000000U
+
+/*Address/command lane VREF Pad Enable*/
+#undef DDR_PHY_IOVCR0_ACREFPEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFPEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFPEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFPEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFPEN_SHIFT                                              28
+#define DDR_PHY_IOVCR0_ACREFPEN_MASK                                               0x10000000U
+
+/*Address/command lane Internal VREF Enable*/
+#undef DDR_PHY_IOVCR0_ACREFEEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFEEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFEEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFEEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFEEN_SHIFT                                              26
+#define DDR_PHY_IOVCR0_ACREFEEN_MASK                                               0x0C000000U
+
+/*Address/command lane Single-End VREF Enable*/
+#undef DDR_PHY_IOVCR0_ACREFSEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFSEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFSEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFSEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFSEN_SHIFT                                              25
+#define DDR_PHY_IOVCR0_ACREFSEN_MASK                                               0x02000000U
+
+/*Address/command lane Internal VREF Enable*/
+#undef DDR_PHY_IOVCR0_ACREFIEN_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFIEN_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFIEN_MASK 
+#define DDR_PHY_IOVCR0_ACREFIEN_DEFVAL                                             0x0F000000
+#define DDR_PHY_IOVCR0_ACREFIEN_SHIFT                                              24
+#define DDR_PHY_IOVCR0_ACREFIEN_MASK                                               0x01000000U
+
+/*External VREF generato REFSEL range select*/
+#undef DDR_PHY_IOVCR0_ACREFESELRANGE_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFESELRANGE_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFESELRANGE_MASK 
+#define DDR_PHY_IOVCR0_ACREFESELRANGE_DEFVAL                                       0x0F000000
+#define DDR_PHY_IOVCR0_ACREFESELRANGE_SHIFT                                        23
+#define DDR_PHY_IOVCR0_ACREFESELRANGE_MASK                                         0x00800000U
+
+/*Address/command lane External VREF Select*/
+#undef DDR_PHY_IOVCR0_ACREFESEL_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFESEL_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFESEL_MASK 
+#define DDR_PHY_IOVCR0_ACREFESEL_DEFVAL                                            0x0F000000
+#define DDR_PHY_IOVCR0_ACREFESEL_SHIFT                                             16
+#define DDR_PHY_IOVCR0_ACREFESEL_MASK                                              0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_IOVCR0_ACREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFSSELRANGE_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFSSELRANGE_MASK 
+#define DDR_PHY_IOVCR0_ACREFSSELRANGE_DEFVAL                                       0x0F000000
+#define DDR_PHY_IOVCR0_ACREFSSELRANGE_SHIFT                                        15
+#define DDR_PHY_IOVCR0_ACREFSSELRANGE_MASK                                         0x00008000U
+
+/*Address/command lane Single-End VREF Select*/
+#undef DDR_PHY_IOVCR0_ACREFSSEL_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACREFSSEL_SHIFT 
+#undef DDR_PHY_IOVCR0_ACREFSSEL_MASK 
+#define DDR_PHY_IOVCR0_ACREFSSEL_DEFVAL                                            0x0F000000
+#define DDR_PHY_IOVCR0_ACREFSSEL_SHIFT                                             8
+#define DDR_PHY_IOVCR0_ACREFSSEL_MASK                                              0x00007F00U
+
+/*Internal VREF generator REFSEL ragne select*/
+#undef DDR_PHY_IOVCR0_ACVREFISELRANGE_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACVREFISELRANGE_SHIFT 
+#undef DDR_PHY_IOVCR0_ACVREFISELRANGE_MASK 
+#define DDR_PHY_IOVCR0_ACVREFISELRANGE_DEFVAL                                      0x0F000000
+#define DDR_PHY_IOVCR0_ACVREFISELRANGE_SHIFT                                       7
+#define DDR_PHY_IOVCR0_ACVREFISELRANGE_MASK                                        0x00000080U
+
+/*REFSEL Control for internal AC IOs*/
+#undef DDR_PHY_IOVCR0_ACVREFISEL_DEFVAL 
+#undef DDR_PHY_IOVCR0_ACVREFISEL_SHIFT 
+#undef DDR_PHY_IOVCR0_ACVREFISEL_MASK 
+#define DDR_PHY_IOVCR0_ACVREFISEL_DEFVAL                                           0x0F000000
+#define DDR_PHY_IOVCR0_ACVREFISEL_SHIFT                                            0
+#define DDR_PHY_IOVCR0_ACVREFISEL_MASK                                             0x0000007FU
+
+/*Number of ctl_clk required to meet (> 150ns) timing requirements during DRAM DQ VREF training*/
+#undef DDR_PHY_VTCR0_TVREF_DEFVAL 
+#undef DDR_PHY_VTCR0_TVREF_SHIFT 
+#undef DDR_PHY_VTCR0_TVREF_MASK 
+#define DDR_PHY_VTCR0_TVREF_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_TVREF_SHIFT                                                  29
+#define DDR_PHY_VTCR0_TVREF_MASK                                                   0xE0000000U
+
+/*DRM DQ VREF training Enable*/
+#undef DDR_PHY_VTCR0_DVEN_DEFVAL 
+#undef DDR_PHY_VTCR0_DVEN_SHIFT 
+#undef DDR_PHY_VTCR0_DVEN_MASK 
+#define DDR_PHY_VTCR0_DVEN_DEFVAL                                                  0x70032019
+#define DDR_PHY_VTCR0_DVEN_SHIFT                                                   28
+#define DDR_PHY_VTCR0_DVEN_MASK                                                    0x10000000U
+
+/*Per Device Addressability Enable*/
+#undef DDR_PHY_VTCR0_PDAEN_DEFVAL 
+#undef DDR_PHY_VTCR0_PDAEN_SHIFT 
+#undef DDR_PHY_VTCR0_PDAEN_MASK 
+#define DDR_PHY_VTCR0_PDAEN_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_PDAEN_SHIFT                                                  27
+#define DDR_PHY_VTCR0_PDAEN_MASK                                                   0x08000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR0_RESERVED_26_DEFVAL 
+#undef DDR_PHY_VTCR0_RESERVED_26_SHIFT 
+#undef DDR_PHY_VTCR0_RESERVED_26_MASK 
+#define DDR_PHY_VTCR0_RESERVED_26_DEFVAL                                           0x70032019
+#define DDR_PHY_VTCR0_RESERVED_26_SHIFT                                            26
+#define DDR_PHY_VTCR0_RESERVED_26_MASK                                             0x04000000U
+
+/*VREF Word Count*/
+#undef DDR_PHY_VTCR0_VWCR_DEFVAL 
+#undef DDR_PHY_VTCR0_VWCR_SHIFT 
+#undef DDR_PHY_VTCR0_VWCR_MASK 
+#define DDR_PHY_VTCR0_VWCR_DEFVAL                                                  0x70032019
+#define DDR_PHY_VTCR0_VWCR_SHIFT                                                   22
+#define DDR_PHY_VTCR0_VWCR_MASK                                                    0x03C00000U
+
+/*DRAM DQ VREF step size used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVSS_DEFVAL 
+#undef DDR_PHY_VTCR0_DVSS_SHIFT 
+#undef DDR_PHY_VTCR0_DVSS_MASK 
+#define DDR_PHY_VTCR0_DVSS_DEFVAL                                                  0x70032019
+#define DDR_PHY_VTCR0_DVSS_SHIFT                                                   18
+#define DDR_PHY_VTCR0_DVSS_MASK                                                    0x003C0000U
+
+/*Maximum VREF limit value used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVMAX_DEFVAL 
+#undef DDR_PHY_VTCR0_DVMAX_SHIFT 
+#undef DDR_PHY_VTCR0_DVMAX_MASK 
+#define DDR_PHY_VTCR0_DVMAX_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_DVMAX_SHIFT                                                  12
+#define DDR_PHY_VTCR0_DVMAX_MASK                                                   0x0003F000U
+
+/*Minimum VREF limit value used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVMIN_DEFVAL 
+#undef DDR_PHY_VTCR0_DVMIN_SHIFT 
+#undef DDR_PHY_VTCR0_DVMIN_MASK 
+#define DDR_PHY_VTCR0_DVMIN_DEFVAL                                                 0x70032019
+#define DDR_PHY_VTCR0_DVMIN_SHIFT                                                  6
+#define DDR_PHY_VTCR0_DVMIN_MASK                                                   0x00000FC0U
+
+/*Initial DRAM DQ VREF value used during DRAM VREF training*/
+#undef DDR_PHY_VTCR0_DVINIT_DEFVAL 
+#undef DDR_PHY_VTCR0_DVINIT_SHIFT 
+#undef DDR_PHY_VTCR0_DVINIT_MASK 
+#define DDR_PHY_VTCR0_DVINIT_DEFVAL                                                0x70032019
+#define DDR_PHY_VTCR0_DVINIT_SHIFT                                                 0
+#define DDR_PHY_VTCR0_DVINIT_MASK                                                  0x0000003FU
+
+/*Host VREF step size used during VREF training. The register value of N indicates step size of (N+1)*/
+#undef DDR_PHY_VTCR1_HVSS_DEFVAL 
+#undef DDR_PHY_VTCR1_HVSS_SHIFT 
+#undef DDR_PHY_VTCR1_HVSS_MASK 
+#define DDR_PHY_VTCR1_HVSS_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_HVSS_SHIFT                                                   28
+#define DDR_PHY_VTCR1_HVSS_MASK                                                    0xF0000000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR1_RESERVED_27_DEFVAL 
+#undef DDR_PHY_VTCR1_RESERVED_27_SHIFT 
+#undef DDR_PHY_VTCR1_RESERVED_27_MASK 
+#define DDR_PHY_VTCR1_RESERVED_27_DEFVAL                                           0x07F00072
+#define DDR_PHY_VTCR1_RESERVED_27_SHIFT                                            27
+#define DDR_PHY_VTCR1_RESERVED_27_MASK                                             0x08000000U
+
+/*Maximum VREF limit value used during DRAM VREF training.*/
+#undef DDR_PHY_VTCR1_HVMAX_DEFVAL 
+#undef DDR_PHY_VTCR1_HVMAX_SHIFT 
+#undef DDR_PHY_VTCR1_HVMAX_MASK 
+#define DDR_PHY_VTCR1_HVMAX_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_HVMAX_SHIFT                                                  20
+#define DDR_PHY_VTCR1_HVMAX_MASK                                                   0x07F00000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR1_RESERVED_19_DEFVAL 
+#undef DDR_PHY_VTCR1_RESERVED_19_SHIFT 
+#undef DDR_PHY_VTCR1_RESERVED_19_MASK 
+#define DDR_PHY_VTCR1_RESERVED_19_DEFVAL                                           0x07F00072
+#define DDR_PHY_VTCR1_RESERVED_19_SHIFT                                            19
+#define DDR_PHY_VTCR1_RESERVED_19_MASK                                             0x00080000U
+
+/*Minimum VREF limit value used during DRAM VREF training.*/
+#undef DDR_PHY_VTCR1_HVMIN_DEFVAL 
+#undef DDR_PHY_VTCR1_HVMIN_SHIFT 
+#undef DDR_PHY_VTCR1_HVMIN_MASK 
+#define DDR_PHY_VTCR1_HVMIN_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_HVMIN_SHIFT                                                  12
+#define DDR_PHY_VTCR1_HVMIN_MASK                                                   0x0007F000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_VTCR1_RESERVED_11_DEFVAL 
+#undef DDR_PHY_VTCR1_RESERVED_11_SHIFT 
+#undef DDR_PHY_VTCR1_RESERVED_11_MASK 
+#define DDR_PHY_VTCR1_RESERVED_11_DEFVAL                                           0x07F00072
+#define DDR_PHY_VTCR1_RESERVED_11_SHIFT                                            11
+#define DDR_PHY_VTCR1_RESERVED_11_MASK                                             0x00000800U
+
+/*Static Host Vref Rank Value*/
+#undef DDR_PHY_VTCR1_SHRNK_DEFVAL 
+#undef DDR_PHY_VTCR1_SHRNK_SHIFT 
+#undef DDR_PHY_VTCR1_SHRNK_MASK 
+#define DDR_PHY_VTCR1_SHRNK_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_SHRNK_SHIFT                                                  9
+#define DDR_PHY_VTCR1_SHRNK_MASK                                                   0x00000600U
+
+/*Static Host Vref Rank Enable*/
+#undef DDR_PHY_VTCR1_SHREN_DEFVAL 
+#undef DDR_PHY_VTCR1_SHREN_SHIFT 
+#undef DDR_PHY_VTCR1_SHREN_MASK 
+#define DDR_PHY_VTCR1_SHREN_DEFVAL                                                 0x07F00072
+#define DDR_PHY_VTCR1_SHREN_SHIFT                                                  8
+#define DDR_PHY_VTCR1_SHREN_MASK                                                   0x00000100U
+
+/*Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training*/
+#undef DDR_PHY_VTCR1_TVREFIO_DEFVAL 
+#undef DDR_PHY_VTCR1_TVREFIO_SHIFT 
+#undef DDR_PHY_VTCR1_TVREFIO_MASK 
+#define DDR_PHY_VTCR1_TVREFIO_DEFVAL                                               0x07F00072
+#define DDR_PHY_VTCR1_TVREFIO_SHIFT                                                5
+#define DDR_PHY_VTCR1_TVREFIO_MASK                                                 0x000000E0U
+
+/*Eye LCDL Offset value for VREF training*/
+#undef DDR_PHY_VTCR1_EOFF_DEFVAL 
+#undef DDR_PHY_VTCR1_EOFF_SHIFT 
+#undef DDR_PHY_VTCR1_EOFF_MASK 
+#define DDR_PHY_VTCR1_EOFF_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_EOFF_SHIFT                                                   3
+#define DDR_PHY_VTCR1_EOFF_MASK                                                    0x00000018U
+
+/*Number of LCDL Eye points for which VREF training is repeated*/
+#undef DDR_PHY_VTCR1_ENUM_DEFVAL 
+#undef DDR_PHY_VTCR1_ENUM_SHIFT 
+#undef DDR_PHY_VTCR1_ENUM_MASK 
+#define DDR_PHY_VTCR1_ENUM_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_ENUM_SHIFT                                                   2
+#define DDR_PHY_VTCR1_ENUM_MASK                                                    0x00000004U
+
+/*HOST (IO) internal VREF training Enable*/
+#undef DDR_PHY_VTCR1_HVEN_DEFVAL 
+#undef DDR_PHY_VTCR1_HVEN_SHIFT 
+#undef DDR_PHY_VTCR1_HVEN_MASK 
+#define DDR_PHY_VTCR1_HVEN_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_HVEN_SHIFT                                                   1
+#define DDR_PHY_VTCR1_HVEN_MASK                                                    0x00000002U
+
+/*Host IO Type Control*/
+#undef DDR_PHY_VTCR1_HVIO_DEFVAL 
+#undef DDR_PHY_VTCR1_HVIO_SHIFT 
+#undef DDR_PHY_VTCR1_HVIO_MASK 
+#define DDR_PHY_VTCR1_HVIO_DEFVAL                                                  0x07F00072
+#define DDR_PHY_VTCR1_HVIO_SHIFT                                                   0
+#define DDR_PHY_VTCR1_HVIO_MASK                                                    0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_31_30_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_31_30_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_ACBDLR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*Delay select for the BDL on Address A[3].*/
+#undef DDR_PHY_ACBDLR6_A03BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A03BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A03BD_MASK 
+#define DDR_PHY_ACBDLR6_A03BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A03BD_SHIFT                                                24
+#define DDR_PHY_ACBDLR6_A03BD_MASK                                                 0x3F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_23_22_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_23_22_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_ACBDLR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*Delay select for the BDL on Address A[2].*/
+#undef DDR_PHY_ACBDLR6_A02BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A02BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A02BD_MASK 
+#define DDR_PHY_ACBDLR6_A02BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A02BD_SHIFT                                                16
+#define DDR_PHY_ACBDLR6_A02BD_MASK                                                 0x003F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_15_14_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_15_14_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_ACBDLR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*Delay select for the BDL on Address A[1].*/
+#undef DDR_PHY_ACBDLR6_A01BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A01BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A01BD_MASK 
+#define DDR_PHY_ACBDLR6_A01BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A01BD_SHIFT                                                8
+#define DDR_PHY_ACBDLR6_A01BD_MASK                                                 0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_ACBDLR6_RESERVED_7_6_MASK 
+#define DDR_PHY_ACBDLR6_RESERVED_7_6_DEFVAL                                        0x00000000
+#define DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_ACBDLR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*Delay select for the BDL on Address A[0].*/
+#undef DDR_PHY_ACBDLR6_A00BD_DEFVAL 
+#undef DDR_PHY_ACBDLR6_A00BD_SHIFT 
+#undef DDR_PHY_ACBDLR6_A00BD_MASK 
+#define DDR_PHY_ACBDLR6_A00BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR6_A00BD_SHIFT                                                0
+#define DDR_PHY_ACBDLR6_A00BD_MASK                                                 0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_31_30_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_31_30_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_ACBDLR7_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*Delay select for the BDL on Address A[7].*/
+#undef DDR_PHY_ACBDLR7_A07BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A07BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A07BD_MASK 
+#define DDR_PHY_ACBDLR7_A07BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A07BD_SHIFT                                                24
+#define DDR_PHY_ACBDLR7_A07BD_MASK                                                 0x3F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_23_22_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_23_22_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_ACBDLR7_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*Delay select for the BDL on Address A[6].*/
+#undef DDR_PHY_ACBDLR7_A06BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A06BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A06BD_MASK 
+#define DDR_PHY_ACBDLR7_A06BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A06BD_SHIFT                                                16
+#define DDR_PHY_ACBDLR7_A06BD_MASK                                                 0x003F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_15_14_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_15_14_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_ACBDLR7_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*Delay select for the BDL on Address A[5].*/
+#undef DDR_PHY_ACBDLR7_A05BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A05BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A05BD_MASK 
+#define DDR_PHY_ACBDLR7_A05BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A05BD_SHIFT                                                8
+#define DDR_PHY_ACBDLR7_A05BD_MASK                                                 0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR7_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_ACBDLR7_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_ACBDLR7_RESERVED_7_6_MASK 
+#define DDR_PHY_ACBDLR7_RESERVED_7_6_DEFVAL                                        0x00000000
+#define DDR_PHY_ACBDLR7_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_ACBDLR7_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*Delay select for the BDL on Address A[4].*/
+#undef DDR_PHY_ACBDLR7_A04BD_DEFVAL 
+#undef DDR_PHY_ACBDLR7_A04BD_SHIFT 
+#undef DDR_PHY_ACBDLR7_A04BD_MASK 
+#define DDR_PHY_ACBDLR7_A04BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR7_A04BD_SHIFT                                                0
+#define DDR_PHY_ACBDLR7_A04BD_MASK                                                 0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_31_30_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_31_30_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_ACBDLR8_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*Delay select for the BDL on Address A[11].*/
+#undef DDR_PHY_ACBDLR8_A11BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A11BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A11BD_MASK 
+#define DDR_PHY_ACBDLR8_A11BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A11BD_SHIFT                                                24
+#define DDR_PHY_ACBDLR8_A11BD_MASK                                                 0x3F000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_23_22_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_23_22_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_ACBDLR8_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*Delay select for the BDL on Address A[10].*/
+#undef DDR_PHY_ACBDLR8_A10BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A10BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A10BD_MASK 
+#define DDR_PHY_ACBDLR8_A10BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A10BD_SHIFT                                                16
+#define DDR_PHY_ACBDLR8_A10BD_MASK                                                 0x003F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_15_14_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_15_14_DEFVAL                                      0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_ACBDLR8_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*Delay select for the BDL on Address A[9].*/
+#undef DDR_PHY_ACBDLR8_A09BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A09BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A09BD_MASK 
+#define DDR_PHY_ACBDLR8_A09BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A09BD_SHIFT                                                8
+#define DDR_PHY_ACBDLR8_A09BD_MASK                                                 0x00003F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ACBDLR8_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_ACBDLR8_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_ACBDLR8_RESERVED_7_6_MASK 
+#define DDR_PHY_ACBDLR8_RESERVED_7_6_DEFVAL                                        0x00000000
+#define DDR_PHY_ACBDLR8_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_ACBDLR8_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*Delay select for the BDL on Address A[8].*/
+#undef DDR_PHY_ACBDLR8_A08BD_DEFVAL 
+#undef DDR_PHY_ACBDLR8_A08BD_SHIFT 
+#undef DDR_PHY_ACBDLR8_A08BD_MASK 
+#define DDR_PHY_ACBDLR8_A08BD_DEFVAL                                               0x00000000
+#define DDR_PHY_ACBDLR8_A08BD_SHIFT                                                0
+#define DDR_PHY_ACBDLR8_A08BD_MASK                                                 0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_ZQCR_RESERVED_31_26_DEFVAL 
+#undef DDR_PHY_ZQCR_RESERVED_31_26_SHIFT 
+#undef DDR_PHY_ZQCR_RESERVED_31_26_MASK 
+#define DDR_PHY_ZQCR_RESERVED_31_26_DEFVAL                                         0x008A2858
+#define DDR_PHY_ZQCR_RESERVED_31_26_SHIFT                                          26
+#define DDR_PHY_ZQCR_RESERVED_31_26_MASK                                           0xFC000000U
+
+/*ZQ VREF Range*/
+#undef DDR_PHY_ZQCR_ZQREFISELRANGE_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQREFISELRANGE_SHIFT 
+#undef DDR_PHY_ZQCR_ZQREFISELRANGE_MASK 
+#define DDR_PHY_ZQCR_ZQREFISELRANGE_DEFVAL                                         0x008A2858
+#define DDR_PHY_ZQCR_ZQREFISELRANGE_SHIFT                                          25
+#define DDR_PHY_ZQCR_ZQREFISELRANGE_MASK                                           0x02000000U
+
+/*Programmable Wait for Frequency B*/
+#undef DDR_PHY_ZQCR_PGWAIT_FRQB_DEFVAL 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQB_SHIFT 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQB_MASK 
+#define DDR_PHY_ZQCR_PGWAIT_FRQB_DEFVAL                                            0x008A2858
+#define DDR_PHY_ZQCR_PGWAIT_FRQB_SHIFT                                             19
+#define DDR_PHY_ZQCR_PGWAIT_FRQB_MASK                                              0x01F80000U
+
+/*Programmable Wait for Frequency A*/
+#undef DDR_PHY_ZQCR_PGWAIT_FRQA_DEFVAL 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQA_SHIFT 
+#undef DDR_PHY_ZQCR_PGWAIT_FRQA_MASK 
+#define DDR_PHY_ZQCR_PGWAIT_FRQA_DEFVAL                                            0x008A2858
+#define DDR_PHY_ZQCR_PGWAIT_FRQA_SHIFT                                             13
+#define DDR_PHY_ZQCR_PGWAIT_FRQA_MASK                                              0x0007E000U
+
+/*ZQ VREF Pad Enable*/
+#undef DDR_PHY_ZQCR_ZQREFPEN_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQREFPEN_SHIFT 
+#undef DDR_PHY_ZQCR_ZQREFPEN_MASK 
+#define DDR_PHY_ZQCR_ZQREFPEN_DEFVAL                                               0x008A2858
+#define DDR_PHY_ZQCR_ZQREFPEN_SHIFT                                                12
+#define DDR_PHY_ZQCR_ZQREFPEN_MASK                                                 0x00001000U
+
+/*ZQ Internal VREF Enable*/
+#undef DDR_PHY_ZQCR_ZQREFIEN_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQREFIEN_SHIFT 
+#undef DDR_PHY_ZQCR_ZQREFIEN_MASK 
+#define DDR_PHY_ZQCR_ZQREFIEN_DEFVAL                                               0x008A2858
+#define DDR_PHY_ZQCR_ZQREFIEN_SHIFT                                                11
+#define DDR_PHY_ZQCR_ZQREFIEN_MASK                                                 0x00000800U
+
+/*Choice of termination mode*/
+#undef DDR_PHY_ZQCR_ODT_MODE_DEFVAL 
+#undef DDR_PHY_ZQCR_ODT_MODE_SHIFT 
+#undef DDR_PHY_ZQCR_ODT_MODE_MASK 
+#define DDR_PHY_ZQCR_ODT_MODE_DEFVAL                                               0x008A2858
+#define DDR_PHY_ZQCR_ODT_MODE_SHIFT                                                9
+#define DDR_PHY_ZQCR_ODT_MODE_MASK                                                 0x00000600U
+
+/*Force ZCAL VT update*/
+#undef DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_DEFVAL 
+#undef DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_SHIFT 
+#undef DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_MASK 
+#define DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_DEFVAL                                   0x008A2858
+#define DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_SHIFT                                    8
+#define DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_MASK                                     0x00000100U
+
+/*IO VT Drift Limit*/
+#undef DDR_PHY_ZQCR_IODLMT_DEFVAL 
+#undef DDR_PHY_ZQCR_IODLMT_SHIFT 
+#undef DDR_PHY_ZQCR_IODLMT_MASK 
+#define DDR_PHY_ZQCR_IODLMT_DEFVAL                                                 0x008A2858
+#define DDR_PHY_ZQCR_IODLMT_SHIFT                                                  5
+#define DDR_PHY_ZQCR_IODLMT_MASK                                                   0x000000E0U
+
+/*Averaging algorithm enable, if set, enables averaging algorithm*/
+#undef DDR_PHY_ZQCR_AVGEN_DEFVAL 
+#undef DDR_PHY_ZQCR_AVGEN_SHIFT 
+#undef DDR_PHY_ZQCR_AVGEN_MASK 
+#define DDR_PHY_ZQCR_AVGEN_DEFVAL                                                  0x008A2858
+#define DDR_PHY_ZQCR_AVGEN_SHIFT                                                   4
+#define DDR_PHY_ZQCR_AVGEN_MASK                                                    0x00000010U
+
+/*Maximum number of averaging rounds to be used by averaging algorithm*/
+#undef DDR_PHY_ZQCR_AVGMAX_DEFVAL 
+#undef DDR_PHY_ZQCR_AVGMAX_SHIFT 
+#undef DDR_PHY_ZQCR_AVGMAX_MASK 
+#define DDR_PHY_ZQCR_AVGMAX_DEFVAL                                                 0x008A2858
+#define DDR_PHY_ZQCR_AVGMAX_SHIFT                                                  2
+#define DDR_PHY_ZQCR_AVGMAX_MASK                                                   0x0000000CU
+
+/*ZQ Calibration Type*/
+#undef DDR_PHY_ZQCR_ZCALT_DEFVAL 
+#undef DDR_PHY_ZQCR_ZCALT_SHIFT 
+#undef DDR_PHY_ZQCR_ZCALT_MASK 
+#define DDR_PHY_ZQCR_ZCALT_DEFVAL                                                  0x008A2858
+#define DDR_PHY_ZQCR_ZCALT_SHIFT                                                   1
+#define DDR_PHY_ZQCR_ZCALT_MASK                                                    0x00000002U
+
+/*ZQ Power Down*/
+#undef DDR_PHY_ZQCR_ZQPD_DEFVAL 
+#undef DDR_PHY_ZQCR_ZQPD_SHIFT 
+#undef DDR_PHY_ZQCR_ZQPD_MASK 
+#define DDR_PHY_ZQCR_ZQPD_DEFVAL                                                   0x008A2858
+#define DDR_PHY_ZQCR_ZQPD_SHIFT                                                    0
+#define DDR_PHY_ZQCR_ZQPD_MASK                                                     0x00000001U
+
+/*Pull-down drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_SHIFT                                           31
+#define DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_MASK                                            0x80000000U
+
+/*Pull-up drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_SHIFT                                           30
+#define DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_MASK                                            0x40000000U
+
+/*Pull-down termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_SHIFT                                           29
+#define DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_MASK                                            0x20000000U
+
+/*Pull-up termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_SHIFT                                           28
+#define DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_MASK                                            0x10000000U
+
+/*Calibration segment bypass*/
+#undef DDR_PHY_ZQ0PR0_ZSEGBYP_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZSEGBYP_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZSEGBYP_MASK 
+#define DDR_PHY_ZQ0PR0_ZSEGBYP_DEFVAL                                              0x000077BB
+#define DDR_PHY_ZQ0PR0_ZSEGBYP_SHIFT                                               27
+#define DDR_PHY_ZQ0PR0_ZSEGBYP_MASK                                                0x08000000U
+
+/*VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB*/
+#undef DDR_PHY_ZQ0PR0_ZLE_MODE_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZLE_MODE_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZLE_MODE_MASK 
+#define DDR_PHY_ZQ0PR0_ZLE_MODE_DEFVAL                                             0x000077BB
+#define DDR_PHY_ZQ0PR0_ZLE_MODE_SHIFT                                              25
+#define DDR_PHY_ZQ0PR0_ZLE_MODE_MASK                                               0x06000000U
+
+/*Termination adjustment*/
+#undef DDR_PHY_ZQ0PR0_ODT_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ODT_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ODT_ADJUST_MASK 
+#define DDR_PHY_ZQ0PR0_ODT_ADJUST_DEFVAL                                           0x000077BB
+#define DDR_PHY_ZQ0PR0_ODT_ADJUST_SHIFT                                            22
+#define DDR_PHY_ZQ0PR0_ODT_ADJUST_MASK                                             0x01C00000U
+
+/*Pulldown drive strength adjustment*/
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_SHIFT                                         19
+#define DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_MASK                                          0x00380000U
+
+/*Pullup drive strength adjustment*/
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_SHIFT                                         16
+#define DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_MASK                                          0x00070000U
+
+/*DRAM Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_SHIFT                                        12
+#define DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_MASK                                         0x0000F000U
+
+/*HOST Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_SHIFT                                        8
+#define DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_MASK                                         0x00000F00U
+
+/*Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_SHIFT                                     4
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_MASK                                      0x000000F0U
+
+/*Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_DEFVAL 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_SHIFT 
+#undef DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_MASK 
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_SHIFT                                     0
+#define DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_MASK                                      0x0000000FU
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR0_RESERVED_31_26_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_RESERVED_31_26_SHIFT 
+#undef DDR_PHY_ZQ0OR0_RESERVED_31_26_MASK 
+#define DDR_PHY_ZQ0OR0_RESERVED_31_26_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR0_RESERVED_31_26_SHIFT                                        26
+#define DDR_PHY_ZQ0OR0_RESERVED_31_26_MASK                                         0xFC000000U
+
+/*Override value for the pull-up output impedance*/
+#undef DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_MASK 
+#define DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_SHIFT                                     16
+#define DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_MASK                                      0x03FF0000U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR0_RESERVED_15_10_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_RESERVED_15_10_SHIFT 
+#undef DDR_PHY_ZQ0OR0_RESERVED_15_10_MASK 
+#define DDR_PHY_ZQ0OR0_RESERVED_15_10_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR0_RESERVED_15_10_SHIFT                                        10
+#define DDR_PHY_ZQ0OR0_RESERVED_15_10_MASK                                         0x0000FC00U
+
+/*Override value for the pull-down output impedance*/
+#undef DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_MASK 
+#define DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_SHIFT                                     0
+#define DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_MASK                                      0x000003FFU
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR1_RESERVED_31_26_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_RESERVED_31_26_SHIFT 
+#undef DDR_PHY_ZQ0OR1_RESERVED_31_26_MASK 
+#define DDR_PHY_ZQ0OR1_RESERVED_31_26_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR1_RESERVED_31_26_SHIFT                                        26
+#define DDR_PHY_ZQ0OR1_RESERVED_31_26_MASK                                         0xFC000000U
+
+/*Override value for the pull-up termination*/
+#undef DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_MASK 
+#define DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_SHIFT                                     16
+#define DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_MASK                                      0x03FF0000U
+
+/*Reserved. Return zeros on reads.*/
+#undef DDR_PHY_ZQ0OR1_RESERVED_15_10_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_RESERVED_15_10_SHIFT 
+#undef DDR_PHY_ZQ0OR1_RESERVED_15_10_MASK 
+#define DDR_PHY_ZQ0OR1_RESERVED_15_10_DEFVAL                                       0x00000000
+#define DDR_PHY_ZQ0OR1_RESERVED_15_10_SHIFT                                        10
+#define DDR_PHY_ZQ0OR1_RESERVED_15_10_MASK                                         0x0000FC00U
+
+/*Override value for the pull-down termination*/
+#undef DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_DEFVAL 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_SHIFT 
+#undef DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_MASK 
+#define DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_DEFVAL                                    0x00000000
+#define DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_SHIFT                                     0
+#define DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_MASK                                      0x000003FFU
+
+/*Pull-down drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_SHIFT                                           31
+#define DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_MASK                                            0x80000000U
+
+/*Pull-up drive strength ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_SHIFT                                           30
+#define DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_MASK                                            0x40000000U
+
+/*Pull-down termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_SHIFT                                           29
+#define DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_MASK                                            0x20000000U
+
+/*Pull-up termination ZCTRL over-ride enable*/
+#undef DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_MASK 
+#define DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_DEFVAL                                          0x000077BB
+#define DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_SHIFT                                           28
+#define DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_MASK                                            0x10000000U
+
+/*Calibration segment bypass*/
+#undef DDR_PHY_ZQ1PR0_ZSEGBYP_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZSEGBYP_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZSEGBYP_MASK 
+#define DDR_PHY_ZQ1PR0_ZSEGBYP_DEFVAL                                              0x000077BB
+#define DDR_PHY_ZQ1PR0_ZSEGBYP_SHIFT                                               27
+#define DDR_PHY_ZQ1PR0_ZSEGBYP_MASK                                                0x08000000U
+
+/*VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB*/
+#undef DDR_PHY_ZQ1PR0_ZLE_MODE_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZLE_MODE_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZLE_MODE_MASK 
+#define DDR_PHY_ZQ1PR0_ZLE_MODE_DEFVAL                                             0x000077BB
+#define DDR_PHY_ZQ1PR0_ZLE_MODE_SHIFT                                              25
+#define DDR_PHY_ZQ1PR0_ZLE_MODE_MASK                                               0x06000000U
+
+/*Termination adjustment*/
+#undef DDR_PHY_ZQ1PR0_ODT_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ODT_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ODT_ADJUST_MASK 
+#define DDR_PHY_ZQ1PR0_ODT_ADJUST_DEFVAL                                           0x000077BB
+#define DDR_PHY_ZQ1PR0_ODT_ADJUST_SHIFT                                            22
+#define DDR_PHY_ZQ1PR0_ODT_ADJUST_MASK                                             0x01C00000U
+
+/*Pulldown drive strength adjustment*/
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_SHIFT                                         19
+#define DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_MASK                                          0x00380000U
+
+/*Pullup drive strength adjustment*/
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_SHIFT 
+#undef DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_MASK 
+#define DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_DEFVAL                                        0x000077BB
+#define DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_SHIFT                                         16
+#define DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_MASK                                          0x00070000U
+
+/*DRAM Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_SHIFT                                        12
+#define DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_MASK                                         0x0000F000U
+
+/*HOST Impedance Divide Ratio*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_DEFVAL                                       0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_SHIFT                                        8
+#define DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_MASK                                         0x00000F00U
+
+/*Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_SHIFT                                     4
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_MASK                                      0x000000F0U
+
+/*Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)*/
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_DEFVAL 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_SHIFT 
+#undef DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_MASK 
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_DEFVAL                                    0x000077BB
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_SHIFT                                     0
+#define DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_MASK                                      0x0000000FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX0GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX0GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX0GCR0_CALBYP_MASK 
+#define DDR_PHY_DX0GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX0GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX0GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX0GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX0GCR0_MDLEN_MASK 
+#define DDR_PHY_DX0GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX0GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX0GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX0GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX0GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX0GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX0GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX0GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX0GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX0GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX0GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX0GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX0GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX0GCR0_RDDLY_MASK 
+#define DDR_PHY_DX0GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX0GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX0GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX0GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX0GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX0GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX0GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX0GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX0GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX0GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX0GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX0GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX0GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX0GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX0GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX0GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX0GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX0GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX0GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX0GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX0GCR0_RTTOH_MASK 
+#define DDR_PHY_DX0GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX0GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX0GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX0GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX0GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX0GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX0GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX0GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX0GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX0GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX0GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX0GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX0GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX0GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX0GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX0GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX0GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX0GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX0GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX0GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX0GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX0GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX0GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX0GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX0GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX0GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX0GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX0GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX0GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX0GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX0GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX0GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX0GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX0GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX0GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX0GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX0GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX0GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX0GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX0GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX0GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX0GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX0GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX0GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX0GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX0GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX0GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX0GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX0GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX0GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX0GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX0GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX0GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX0GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX0GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX0GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX0GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX0GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX0GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX0GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX0GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX0GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX0GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX0GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX0GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX0GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX0GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX0GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX0GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX0GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX0GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX0GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX0GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX0GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX0GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX0GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX0GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX0GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX0GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX0GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX0GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX0GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX0GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX0GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX0GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX0GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX0GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX0GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX0GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX0GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX0GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX0GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX0GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX0GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX0GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX0GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX0GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX0GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX0GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX0GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX0GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX0GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX0GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX0GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX0GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX0GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX0GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX0GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX0GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX0LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX0LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX0LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX0LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX0LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX0LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX0LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX0LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX0LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX0LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX0LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX0LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX0LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX0LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX0LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX0LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX0GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX0GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX0GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX0GTR0_WDQSL_MASK 
+#define DDR_PHY_DX0GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX0GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX0GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX0GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX0GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX0GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX0GTR0_WLSL_MASK 
+#define DDR_PHY_DX0GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX0GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX0GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX0GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX0GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX0GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX0GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX0GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX0GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX0GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX0GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX0GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX0GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX0GTR0_DGSL_MASK 
+#define DDR_PHY_DX0GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX0GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX0GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX1GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX1GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX1GCR0_CALBYP_MASK 
+#define DDR_PHY_DX1GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX1GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX1GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX1GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX1GCR0_MDLEN_MASK 
+#define DDR_PHY_DX1GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX1GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX1GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX1GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX1GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX1GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX1GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX1GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX1GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX1GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX1GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX1GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX1GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX1GCR0_RDDLY_MASK 
+#define DDR_PHY_DX1GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX1GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX1GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX1GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX1GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX1GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX1GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX1GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX1GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX1GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX1GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX1GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX1GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX1GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX1GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX1GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX1GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX1GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX1GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX1GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX1GCR0_RTTOH_MASK 
+#define DDR_PHY_DX1GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX1GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX1GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX1GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX1GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX1GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX1GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX1GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX1GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX1GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX1GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX1GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX1GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX1GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX1GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX1GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX1GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX1GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX1GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX1GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX1GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX1GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX1GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX1GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX1GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX1GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX1GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX1GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX1GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX1GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX1GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX1GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX1GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX1GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX1GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX1GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX1GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX1GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX1GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX1GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX1GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX1GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX1GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX1GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX1GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX1GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX1GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX1GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX1GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX1GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX1GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX1GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX1GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX1GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX1GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX1GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX1GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX1GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX1GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX1GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX1GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX1GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX1GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX1GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX1GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX1GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX1GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX1GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX1GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX1GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX1GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX1GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX1GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX1GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX1GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX1GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX1GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX1GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX1GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX1GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX1GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX1GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX1GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX1GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX1GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX1GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX1GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX1GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX1GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX1GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX1GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX1GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX1GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX1GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX1GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX1GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX1GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX1GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX1GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX1GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX1GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX1GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX1GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX1GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX1GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX1GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX1GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX1GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX1GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX1LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX1LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX1LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX1LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX1LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX1LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX1LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX1LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX1LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX1LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX1LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX1LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX1LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX1LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX1LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX1LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX1GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX1GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX1GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX1GTR0_WDQSL_MASK 
+#define DDR_PHY_DX1GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX1GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX1GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX1GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX1GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX1GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX1GTR0_WLSL_MASK 
+#define DDR_PHY_DX1GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX1GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX1GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX1GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX1GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX1GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX1GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX1GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX1GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX1GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX1GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX1GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX1GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX1GTR0_DGSL_MASK 
+#define DDR_PHY_DX1GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX1GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX1GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX2GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX2GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX2GCR0_CALBYP_MASK 
+#define DDR_PHY_DX2GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX2GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX2GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX2GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX2GCR0_MDLEN_MASK 
+#define DDR_PHY_DX2GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX2GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX2GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX2GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX2GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX2GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX2GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX2GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX2GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX2GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX2GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX2GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX2GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX2GCR0_RDDLY_MASK 
+#define DDR_PHY_DX2GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX2GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX2GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX2GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX2GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX2GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX2GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX2GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX2GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX2GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX2GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX2GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX2GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX2GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX2GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX2GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX2GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX2GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX2GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX2GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX2GCR0_RTTOH_MASK 
+#define DDR_PHY_DX2GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX2GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX2GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX2GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX2GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX2GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX2GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX2GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX2GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX2GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX2GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX2GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX2GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX2GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX2GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX2GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX2GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX2GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX2GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX2GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX2GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX2GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX2GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX2GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX2GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX2GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX2GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX2GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX2GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX2GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX2GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX2GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX2GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX2GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX2GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX2GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX2GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX2GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX2GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX2GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX2GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX2GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX2GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX2GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX2GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX2GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX2GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX2GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX2GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX2GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX2GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX2GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX2GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX2GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX2GCR1_QSSEL_MASK 
+#define DDR_PHY_DX2GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX2GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX2GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX2GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_OEEN_MASK 
+#define DDR_PHY_DX2GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX2GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX2GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX2GCR1_PDREN_MASK 
+#define DDR_PHY_DX2GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX2GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX2GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX2GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_TEEN_MASK 
+#define DDR_PHY_DX2GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX2GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX2GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_DSEN_MASK 
+#define DDR_PHY_DX2GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX2GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX2GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_DMEN_MASK 
+#define DDR_PHY_DX2GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX2GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX2GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX2GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX2GCR1_DQEN_MASK 
+#define DDR_PHY_DX2GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX2GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX2GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX2GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX2GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX2GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX2GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX2GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX2GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX2GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX2GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX2GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX2GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX2GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX2GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX2GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX2GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX2GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX2GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX2GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX2GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX2GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX2GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX2GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX2GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX2GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX2GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX2GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX2GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX2GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX2GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX2GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX2GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX2GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX2GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX2GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX2GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX2GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX2GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX2GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX2GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX2GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX2GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX2GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX2GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX2GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX2GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX2GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX2GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX2GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX2GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX2GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX2GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX2GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX2GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX2GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX2GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX2GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX2GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX2GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX2GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX2GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX2GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX2GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX2GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX2GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX2GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX2GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX2GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX2GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX2GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX2GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX2GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX2GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX2GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX2GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX2GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX2LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX2LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX2LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX2LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX2LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX2LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX2LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX2LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX2LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX2LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX2LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX2LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX2LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX2LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX2LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX2LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX2GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX2GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX2GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX2GTR0_WDQSL_MASK 
+#define DDR_PHY_DX2GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX2GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX2GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX2GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX2GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX2GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX2GTR0_WLSL_MASK 
+#define DDR_PHY_DX2GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX2GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX2GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX2GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX2GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX2GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX2GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX2GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX2GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX2GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX2GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX2GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX2GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX2GTR0_DGSL_MASK 
+#define DDR_PHY_DX2GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX2GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX2GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX3GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX3GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX3GCR0_CALBYP_MASK 
+#define DDR_PHY_DX3GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX3GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX3GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX3GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX3GCR0_MDLEN_MASK 
+#define DDR_PHY_DX3GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX3GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX3GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX3GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX3GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX3GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX3GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX3GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX3GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX3GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX3GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX3GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX3GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX3GCR0_RDDLY_MASK 
+#define DDR_PHY_DX3GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX3GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX3GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX3GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX3GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX3GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX3GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX3GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX3GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX3GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX3GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX3GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX3GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX3GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX3GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX3GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX3GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX3GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX3GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX3GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX3GCR0_RTTOH_MASK 
+#define DDR_PHY_DX3GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX3GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX3GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX3GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX3GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX3GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX3GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX3GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX3GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX3GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX3GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX3GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX3GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX3GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX3GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX3GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX3GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX3GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX3GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX3GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX3GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX3GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX3GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX3GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX3GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX3GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX3GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX3GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX3GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX3GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX3GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX3GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX3GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX3GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX3GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX3GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX3GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX3GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX3GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX3GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX3GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX3GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX3GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX3GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX3GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX3GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX3GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX3GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX3GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX3GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX3GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX3GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX3GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX3GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX3GCR1_QSSEL_MASK 
+#define DDR_PHY_DX3GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX3GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX3GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX3GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_OEEN_MASK 
+#define DDR_PHY_DX3GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX3GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX3GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX3GCR1_PDREN_MASK 
+#define DDR_PHY_DX3GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX3GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX3GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX3GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_TEEN_MASK 
+#define DDR_PHY_DX3GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX3GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX3GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_DSEN_MASK 
+#define DDR_PHY_DX3GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX3GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX3GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_DMEN_MASK 
+#define DDR_PHY_DX3GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX3GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX3GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX3GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX3GCR1_DQEN_MASK 
+#define DDR_PHY_DX3GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX3GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX3GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX3GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX3GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX3GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX3GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX3GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX3GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX3GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX3GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX3GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX3GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX3GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX3GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX3GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX3GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX3GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX3GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX3GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX3GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX3GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX3GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX3GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX3GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX3GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX3GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX3GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX3GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX3GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX3GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX3GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX3GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX3GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX3GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX3GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX3GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX3GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX3GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX3GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX3GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX3GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX3GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX3GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX3GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX3GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX3GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX3GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX3GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX3GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX3GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX3GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX3GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX3GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX3GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX3GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX3GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX3GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX3GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX3GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX3GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX3GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX3GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX3GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX3GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX3GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX3GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX3GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX3GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX3GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX3GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX3GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX3GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX3GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX3GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX3GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX3GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX3LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX3LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX3LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX3LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX3LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX3LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX3LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX3LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX3LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX3LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX3LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX3LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX3LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX3LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX3LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX3LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX3GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX3GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX3GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX3GTR0_WDQSL_MASK 
+#define DDR_PHY_DX3GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX3GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX3GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX3GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX3GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX3GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX3GTR0_WLSL_MASK 
+#define DDR_PHY_DX3GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX3GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX3GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX3GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX3GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX3GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX3GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX3GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX3GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX3GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX3GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX3GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX3GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX3GTR0_DGSL_MASK 
+#define DDR_PHY_DX3GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX3GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX3GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX4GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX4GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX4GCR0_CALBYP_MASK 
+#define DDR_PHY_DX4GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX4GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX4GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX4GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX4GCR0_MDLEN_MASK 
+#define DDR_PHY_DX4GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX4GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX4GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX4GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX4GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX4GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX4GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX4GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX4GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX4GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX4GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX4GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX4GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX4GCR0_RDDLY_MASK 
+#define DDR_PHY_DX4GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX4GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX4GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX4GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX4GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX4GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX4GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX4GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX4GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX4GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX4GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX4GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX4GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX4GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX4GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX4GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX4GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX4GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX4GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX4GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX4GCR0_RTTOH_MASK 
+#define DDR_PHY_DX4GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX4GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX4GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX4GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX4GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX4GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX4GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX4GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX4GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX4GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX4GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX4GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX4GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX4GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX4GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX4GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX4GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX4GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX4GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX4GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX4GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX4GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX4GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX4GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX4GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX4GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX4GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX4GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX4GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX4GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX4GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX4GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX4GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX4GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX4GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX4GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX4GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX4GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX4GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX4GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX4GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX4GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX4GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX4GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX4GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX4GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX4GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX4GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX4GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX4GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX4GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX4GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX4GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX4GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX4GCR1_QSSEL_MASK 
+#define DDR_PHY_DX4GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX4GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX4GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX4GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_OEEN_MASK 
+#define DDR_PHY_DX4GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX4GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX4GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX4GCR1_PDREN_MASK 
+#define DDR_PHY_DX4GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX4GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX4GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX4GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_TEEN_MASK 
+#define DDR_PHY_DX4GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX4GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX4GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_DSEN_MASK 
+#define DDR_PHY_DX4GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX4GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX4GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_DMEN_MASK 
+#define DDR_PHY_DX4GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX4GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX4GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX4GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX4GCR1_DQEN_MASK 
+#define DDR_PHY_DX4GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX4GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX4GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX4GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX4GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX4GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX4GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX4GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX4GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX4GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX4GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX4GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX4GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX4GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX4GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX4GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX4GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX4GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX4GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX4GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX4GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX4GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX4GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX4GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX4GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX4GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX4GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX4GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX4GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX4GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX4GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX4GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX4GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX4GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX4GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX4GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX4GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX4GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX4GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX4GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX4GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX4GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX4GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX4GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX4GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX4GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX4GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX4GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX4GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX4GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX4GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX4GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX4GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX4GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX4GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX4GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX4GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX4GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX4GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX4GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX4GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX4GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX4GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX4GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX4GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX4GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX4GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX4GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX4GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX4GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX4GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX4GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX4GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX4GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX4GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX4GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX4GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX4LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX4LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX4LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX4LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX4LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX4LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX4LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX4LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX4LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX4LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX4LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX4LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX4LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX4LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX4LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX4LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX4GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX4GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX4GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX4GTR0_WDQSL_MASK 
+#define DDR_PHY_DX4GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX4GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX4GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX4GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX4GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX4GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX4GTR0_WLSL_MASK 
+#define DDR_PHY_DX4GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX4GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX4GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX4GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX4GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX4GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX4GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX4GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX4GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX4GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX4GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX4GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX4GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX4GTR0_DGSL_MASK 
+#define DDR_PHY_DX4GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX4GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX4GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX5GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX5GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX5GCR0_CALBYP_MASK 
+#define DDR_PHY_DX5GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX5GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX5GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX5GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX5GCR0_MDLEN_MASK 
+#define DDR_PHY_DX5GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX5GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX5GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX5GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX5GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX5GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX5GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX5GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX5GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX5GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX5GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX5GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX5GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX5GCR0_RDDLY_MASK 
+#define DDR_PHY_DX5GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX5GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX5GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX5GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX5GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX5GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX5GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX5GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX5GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX5GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX5GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX5GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX5GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX5GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX5GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX5GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX5GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX5GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX5GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX5GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX5GCR0_RTTOH_MASK 
+#define DDR_PHY_DX5GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX5GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX5GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX5GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX5GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX5GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX5GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX5GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX5GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX5GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX5GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX5GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX5GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX5GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX5GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX5GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX5GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX5GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX5GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX5GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX5GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX5GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX5GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX5GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX5GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX5GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX5GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX5GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX5GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX5GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX5GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX5GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX5GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX5GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX5GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX5GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX5GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX5GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX5GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX5GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX5GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX5GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX5GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX5GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX5GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX5GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX5GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX5GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX5GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX5GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX5GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX5GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX5GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX5GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX5GCR1_QSSEL_MASK 
+#define DDR_PHY_DX5GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX5GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX5GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX5GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_OEEN_MASK 
+#define DDR_PHY_DX5GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX5GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX5GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX5GCR1_PDREN_MASK 
+#define DDR_PHY_DX5GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX5GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX5GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX5GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_TEEN_MASK 
+#define DDR_PHY_DX5GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX5GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX5GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_DSEN_MASK 
+#define DDR_PHY_DX5GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX5GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX5GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_DMEN_MASK 
+#define DDR_PHY_DX5GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX5GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX5GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX5GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX5GCR1_DQEN_MASK 
+#define DDR_PHY_DX5GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX5GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX5GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX5GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX5GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX5GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX5GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX5GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX5GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX5GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX5GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX5GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX5GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX5GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX5GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX5GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX5GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX5GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX5GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX5GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX5GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX5GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX5GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX5GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX5GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX5GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX5GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX5GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX5GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX5GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX5GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX5GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX5GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX5GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX5GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX5GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX5GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX5GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX5GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX5GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX5GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX5GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX5GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX5GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX5GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX5GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX5GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX5GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX5GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX5GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX5GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX5GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX5GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX5GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX5GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX5GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX5GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX5GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX5GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX5GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX5GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX5GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX5GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX5GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX5GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX5GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX5GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX5GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX5GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX5GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX5GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX5GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX5GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX5GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX5GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX5GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX5GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX5LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX5LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX5LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX5LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX5LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX5LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX5LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX5LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX5LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX5LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX5LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX5LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX5LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX5LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX5LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX5LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX5GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX5GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX5GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX5GTR0_WDQSL_MASK 
+#define DDR_PHY_DX5GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX5GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX5GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX5GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX5GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX5GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX5GTR0_WLSL_MASK 
+#define DDR_PHY_DX5GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX5GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX5GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX5GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX5GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX5GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX5GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX5GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX5GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX5GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX5GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX5GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX5GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX5GTR0_DGSL_MASK 
+#define DDR_PHY_DX5GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX5GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX5GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX6GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX6GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX6GCR0_CALBYP_MASK 
+#define DDR_PHY_DX6GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX6GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX6GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX6GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX6GCR0_MDLEN_MASK 
+#define DDR_PHY_DX6GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX6GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX6GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX6GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX6GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX6GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX6GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX6GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX6GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX6GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX6GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX6GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX6GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX6GCR0_RDDLY_MASK 
+#define DDR_PHY_DX6GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX6GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX6GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX6GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX6GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX6GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX6GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX6GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX6GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX6GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX6GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX6GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX6GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX6GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX6GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX6GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX6GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX6GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX6GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX6GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX6GCR0_RTTOH_MASK 
+#define DDR_PHY_DX6GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX6GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX6GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX6GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX6GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX6GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX6GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX6GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX6GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX6GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX6GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX6GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX6GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX6GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX6GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX6GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX6GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX6GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX6GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX6GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX6GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX6GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX6GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX6GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX6GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX6GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX6GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX6GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX6GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX6GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX6GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX6GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX6GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX6GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX6GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX6GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX6GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX6GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX6GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX6GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX6GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX6GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX6GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX6GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX6GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX6GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX6GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX6GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX6GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX6GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX6GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX6GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX6GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX6GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX6GCR1_QSSEL_MASK 
+#define DDR_PHY_DX6GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX6GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX6GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX6GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_OEEN_MASK 
+#define DDR_PHY_DX6GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX6GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX6GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX6GCR1_PDREN_MASK 
+#define DDR_PHY_DX6GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX6GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX6GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX6GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_TEEN_MASK 
+#define DDR_PHY_DX6GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX6GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX6GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_DSEN_MASK 
+#define DDR_PHY_DX6GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX6GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX6GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_DMEN_MASK 
+#define DDR_PHY_DX6GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX6GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX6GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX6GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX6GCR1_DQEN_MASK 
+#define DDR_PHY_DX6GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX6GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX6GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX6GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX6GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX6GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX6GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX6GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX6GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX6GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX6GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX6GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX6GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX6GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX6GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX6GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX6GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX6GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX6GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX6GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX6GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX6GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX6GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX6GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX6GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX6GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX6GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX6GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX6GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX6GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX6GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX6GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX6GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX6GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX6GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX6GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX6GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX6GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX6GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX6GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX6GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX6GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX6GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX6GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX6GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX6GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX6GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX6GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX6GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX6GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX6GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX6GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX6GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX6GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX6GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX6GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX6GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX6GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX6GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX6GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX6GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX6GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX6GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX6GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX6GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX6GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX6GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX6GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX6GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX6GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX6GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX6GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX6GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX6GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX6GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX6GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX6GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX6LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX6LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX6LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX6LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX6LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX6LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX6LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX6LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX6LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX6LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX6LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX6LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX6LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX6LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX6LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX6LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX6GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX6GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX6GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX6GTR0_WDQSL_MASK 
+#define DDR_PHY_DX6GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX6GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX6GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX6GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX6GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX6GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX6GTR0_WLSL_MASK 
+#define DDR_PHY_DX6GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX6GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX6GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX6GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX6GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX6GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX6GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX6GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX6GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX6GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX6GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX6GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX6GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX6GTR0_DGSL_MASK 
+#define DDR_PHY_DX6GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX6GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX6GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX7GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX7GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX7GCR0_CALBYP_MASK 
+#define DDR_PHY_DX7GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX7GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX7GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX7GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX7GCR0_MDLEN_MASK 
+#define DDR_PHY_DX7GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX7GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX7GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX7GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX7GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX7GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX7GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX7GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX7GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX7GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX7GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX7GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX7GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX7GCR0_RDDLY_MASK 
+#define DDR_PHY_DX7GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX7GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX7GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX7GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX7GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX7GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX7GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX7GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX7GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX7GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX7GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX7GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX7GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX7GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX7GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX7GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX7GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX7GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX7GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX7GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX7GCR0_RTTOH_MASK 
+#define DDR_PHY_DX7GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX7GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX7GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX7GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX7GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX7GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX7GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX7GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX7GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX7GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX7GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX7GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX7GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX7GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX7GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX7GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX7GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX7GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX7GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX7GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX7GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX7GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX7GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX7GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX7GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX7GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX7GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX7GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX7GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX7GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX7GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX7GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX7GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX7GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX7GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX7GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX7GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX7GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX7GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX7GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX7GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX7GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX7GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX7GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX7GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX7GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX7GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX7GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX7GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX7GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX7GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX7GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX7GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX7GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX7GCR1_QSSEL_MASK 
+#define DDR_PHY_DX7GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX7GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX7GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX7GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_OEEN_MASK 
+#define DDR_PHY_DX7GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX7GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX7GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX7GCR1_PDREN_MASK 
+#define DDR_PHY_DX7GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX7GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX7GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX7GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_TEEN_MASK 
+#define DDR_PHY_DX7GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX7GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX7GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_DSEN_MASK 
+#define DDR_PHY_DX7GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX7GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX7GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_DMEN_MASK 
+#define DDR_PHY_DX7GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX7GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX7GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX7GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX7GCR1_DQEN_MASK 
+#define DDR_PHY_DX7GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX7GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX7GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX7GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX7GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX7GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX7GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX7GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX7GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX7GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX7GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX7GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX7GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX7GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX7GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX7GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX7GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX7GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX7GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX7GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX7GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX7GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX7GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX7GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX7GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX7GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX7GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX7GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX7GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX7GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX7GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX7GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX7GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX7GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX7GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX7GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX7GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX7GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX7GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX7GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX7GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX7GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX7GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX7GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX7GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX7GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX7GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX7GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX7GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX7GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX7GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX7GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX7GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX7GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX7GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX7GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX7GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX7GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX7GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX7GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX7GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX7GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX7GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX7GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX7GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX7GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX7GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX7GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX7GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX7GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX7GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX7GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX7GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX7GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX7GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX7GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX7GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX7LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX7LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX7LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX7LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX7LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX7LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX7LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX7LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX7LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX7LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX7LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX7LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX7LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX7LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX7LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX7LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX7GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX7GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX7GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX7GTR0_WDQSL_MASK 
+#define DDR_PHY_DX7GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX7GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX7GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX7GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX7GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX7GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX7GTR0_WLSL_MASK 
+#define DDR_PHY_DX7GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX7GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX7GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX7GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX7GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX7GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX7GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX7GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX7GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX7GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX7GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX7GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX7GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX7GTR0_DGSL_MASK 
+#define DDR_PHY_DX7GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX7GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX7GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Calibration Bypass*/
+#undef DDR_PHY_DX8GCR0_CALBYP_DEFVAL 
+#undef DDR_PHY_DX8GCR0_CALBYP_SHIFT 
+#undef DDR_PHY_DX8GCR0_CALBYP_MASK 
+#define DDR_PHY_DX8GCR0_CALBYP_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_CALBYP_SHIFT                                               31
+#define DDR_PHY_DX8GCR0_CALBYP_MASK                                                0x80000000U
+
+/*Master Delay Line Enable*/
+#undef DDR_PHY_DX8GCR0_MDLEN_DEFVAL 
+#undef DDR_PHY_DX8GCR0_MDLEN_SHIFT 
+#undef DDR_PHY_DX8GCR0_MDLEN_MASK 
+#define DDR_PHY_DX8GCR0_MDLEN_DEFVAL                                               0x40200204
+#define DDR_PHY_DX8GCR0_MDLEN_SHIFT                                                30
+#define DDR_PHY_DX8GCR0_MDLEN_MASK                                                 0x40000000U
+
+/*Configurable ODT(TE) Phase Shift*/
+#undef DDR_PHY_DX8GCR0_CODTSHFT_DEFVAL 
+#undef DDR_PHY_DX8GCR0_CODTSHFT_SHIFT 
+#undef DDR_PHY_DX8GCR0_CODTSHFT_MASK 
+#define DDR_PHY_DX8GCR0_CODTSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX8GCR0_CODTSHFT_SHIFT                                             28
+#define DDR_PHY_DX8GCR0_CODTSHFT_MASK                                              0x30000000U
+
+/*DQS Duty Cycle Correction*/
+#undef DDR_PHY_DX8GCR0_DQSDCC_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSDCC_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSDCC_MASK 
+#define DDR_PHY_DX8GCR0_DQSDCC_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_DQSDCC_SHIFT                                               24
+#define DDR_PHY_DX8GCR0_DQSDCC_MASK                                                0x0F000000U
+
+/*Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY*/
+#undef DDR_PHY_DX8GCR0_RDDLY_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RDDLY_SHIFT 
+#undef DDR_PHY_DX8GCR0_RDDLY_MASK 
+#define DDR_PHY_DX8GCR0_RDDLY_DEFVAL                                               0x40200204
+#define DDR_PHY_DX8GCR0_RDDLY_SHIFT                                                20
+#define DDR_PHY_DX8GCR0_RDDLY_MASK                                                 0x00F00000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GCR0_RESERVED_19_14_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RESERVED_19_14_SHIFT 
+#undef DDR_PHY_DX8GCR0_RESERVED_19_14_MASK 
+#define DDR_PHY_DX8GCR0_RESERVED_19_14_DEFVAL                                      0x40200204
+#define DDR_PHY_DX8GCR0_RESERVED_19_14_SHIFT                                       14
+#define DDR_PHY_DX8GCR0_RESERVED_19_14_MASK                                        0x000FC000U
+
+/*DQSNSE Power Down Receiver*/
+#undef DDR_PHY_DX8GCR0_DQSNSEPDR_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSNSEPDR_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSNSEPDR_MASK 
+#define DDR_PHY_DX8GCR0_DQSNSEPDR_DEFVAL                                           0x40200204
+#define DDR_PHY_DX8GCR0_DQSNSEPDR_SHIFT                                            13
+#define DDR_PHY_DX8GCR0_DQSNSEPDR_MASK                                             0x00002000U
+
+/*DQSSE Power Down Receiver*/
+#undef DDR_PHY_DX8GCR0_DQSSEPDR_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSSEPDR_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSSEPDR_MASK 
+#define DDR_PHY_DX8GCR0_DQSSEPDR_DEFVAL                                            0x40200204
+#define DDR_PHY_DX8GCR0_DQSSEPDR_SHIFT                                             12
+#define DDR_PHY_DX8GCR0_DQSSEPDR_MASK                                              0x00001000U
+
+/*RTT On Additive Latency*/
+#undef DDR_PHY_DX8GCR0_RTTOAL_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RTTOAL_SHIFT 
+#undef DDR_PHY_DX8GCR0_RTTOAL_MASK 
+#define DDR_PHY_DX8GCR0_RTTOAL_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_RTTOAL_SHIFT                                               11
+#define DDR_PHY_DX8GCR0_RTTOAL_MASK                                                0x00000800U
+
+/*RTT Output Hold*/
+#undef DDR_PHY_DX8GCR0_RTTOH_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RTTOH_SHIFT 
+#undef DDR_PHY_DX8GCR0_RTTOH_MASK 
+#define DDR_PHY_DX8GCR0_RTTOH_DEFVAL                                               0x40200204
+#define DDR_PHY_DX8GCR0_RTTOH_SHIFT                                                9
+#define DDR_PHY_DX8GCR0_RTTOH_MASK                                                 0x00000600U
+
+/*Configurable PDR Phase Shift*/
+#undef DDR_PHY_DX8GCR0_CPDRSHFT_DEFVAL 
+#undef DDR_PHY_DX8GCR0_CPDRSHFT_SHIFT 
+#undef DDR_PHY_DX8GCR0_CPDRSHFT_MASK 
+#define DDR_PHY_DX8GCR0_CPDRSHFT_DEFVAL                                            0x40200204
+#define DDR_PHY_DX8GCR0_CPDRSHFT_SHIFT                                             7
+#define DDR_PHY_DX8GCR0_CPDRSHFT_MASK                                              0x00000180U
+
+/*DQSR Power Down*/
+#undef DDR_PHY_DX8GCR0_DQSRPD_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSRPD_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSRPD_MASK 
+#define DDR_PHY_DX8GCR0_DQSRPD_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_DQSRPD_SHIFT                                               6
+#define DDR_PHY_DX8GCR0_DQSRPD_MASK                                                0x00000040U
+
+/*DQSG Power Down Receiver*/
+#undef DDR_PHY_DX8GCR0_DQSGPDR_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSGPDR_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSGPDR_MASK 
+#define DDR_PHY_DX8GCR0_DQSGPDR_DEFVAL                                             0x40200204
+#define DDR_PHY_DX8GCR0_DQSGPDR_SHIFT                                              5
+#define DDR_PHY_DX8GCR0_DQSGPDR_MASK                                               0x00000020U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GCR0_RESERVED_4_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RESERVED_4_SHIFT 
+#undef DDR_PHY_DX8GCR0_RESERVED_4_MASK 
+#define DDR_PHY_DX8GCR0_RESERVED_4_DEFVAL                                          0x40200204
+#define DDR_PHY_DX8GCR0_RESERVED_4_SHIFT                                           4
+#define DDR_PHY_DX8GCR0_RESERVED_4_MASK                                            0x00000010U
+
+/*DQSG On-Die Termination*/
+#undef DDR_PHY_DX8GCR0_DQSGODT_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSGODT_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSGODT_MASK 
+#define DDR_PHY_DX8GCR0_DQSGODT_DEFVAL                                             0x40200204
+#define DDR_PHY_DX8GCR0_DQSGODT_SHIFT                                              3
+#define DDR_PHY_DX8GCR0_DQSGODT_MASK                                               0x00000008U
+
+/*DQSG Output Enable*/
+#undef DDR_PHY_DX8GCR0_DQSGOE_DEFVAL 
+#undef DDR_PHY_DX8GCR0_DQSGOE_SHIFT 
+#undef DDR_PHY_DX8GCR0_DQSGOE_MASK 
+#define DDR_PHY_DX8GCR0_DQSGOE_DEFVAL                                              0x40200204
+#define DDR_PHY_DX8GCR0_DQSGOE_SHIFT                                               2
+#define DDR_PHY_DX8GCR0_DQSGOE_MASK                                                0x00000004U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GCR0_RESERVED_1_0_DEFVAL 
+#undef DDR_PHY_DX8GCR0_RESERVED_1_0_SHIFT 
+#undef DDR_PHY_DX8GCR0_RESERVED_1_0_MASK 
+#define DDR_PHY_DX8GCR0_RESERVED_1_0_DEFVAL                                        0x40200204
+#define DDR_PHY_DX8GCR0_RESERVED_1_0_SHIFT                                         0
+#define DDR_PHY_DX8GCR0_RESERVED_1_0_MASK                                          0x00000003U
+
+/*Enables the PDR mode for DQ[7:0]*/
+#undef DDR_PHY_DX8GCR1_DXPDRMODE_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DXPDRMODE_SHIFT 
+#undef DDR_PHY_DX8GCR1_DXPDRMODE_MASK 
+#define DDR_PHY_DX8GCR1_DXPDRMODE_DEFVAL                                           0x00007FFF
+#define DDR_PHY_DX8GCR1_DXPDRMODE_SHIFT                                            16
+#define DDR_PHY_DX8GCR1_DXPDRMODE_MASK                                             0xFFFF0000U
+
+/*Reserved. Returns zeroes on reads.*/
+#undef DDR_PHY_DX8GCR1_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX8GCR1_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX8GCR1_RESERVED_15_MASK 
+#define DDR_PHY_DX8GCR1_RESERVED_15_DEFVAL                                         0x00007FFF
+#define DDR_PHY_DX8GCR1_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX8GCR1_RESERVED_15_MASK                                           0x00008000U
+
+/*Select the delayed or non-delayed read data strobe #*/
+#undef DDR_PHY_DX8GCR1_QSNSEL_DEFVAL 
+#undef DDR_PHY_DX8GCR1_QSNSEL_SHIFT 
+#undef DDR_PHY_DX8GCR1_QSNSEL_MASK 
+#define DDR_PHY_DX8GCR1_QSNSEL_DEFVAL                                              0x00007FFF
+#define DDR_PHY_DX8GCR1_QSNSEL_SHIFT                                               14
+#define DDR_PHY_DX8GCR1_QSNSEL_MASK                                                0x00004000U
+
+/*Select the delayed or non-delayed read data strobe*/
+#undef DDR_PHY_DX8GCR1_QSSEL_DEFVAL 
+#undef DDR_PHY_DX8GCR1_QSSEL_SHIFT 
+#undef DDR_PHY_DX8GCR1_QSSEL_MASK 
+#define DDR_PHY_DX8GCR1_QSSEL_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX8GCR1_QSSEL_SHIFT                                                13
+#define DDR_PHY_DX8GCR1_QSSEL_MASK                                                 0x00002000U
+
+/*Enables Read Data Strobe in a byte lane*/
+#undef DDR_PHY_DX8GCR1_OEEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_OEEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_OEEN_MASK 
+#define DDR_PHY_DX8GCR1_OEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_OEEN_SHIFT                                                 12
+#define DDR_PHY_DX8GCR1_OEEN_MASK                                                  0x00001000U
+
+/*Enables PDR in a byte lane*/
+#undef DDR_PHY_DX8GCR1_PDREN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_PDREN_SHIFT 
+#undef DDR_PHY_DX8GCR1_PDREN_MASK 
+#define DDR_PHY_DX8GCR1_PDREN_DEFVAL                                               0x00007FFF
+#define DDR_PHY_DX8GCR1_PDREN_SHIFT                                                11
+#define DDR_PHY_DX8GCR1_PDREN_MASK                                                 0x00000800U
+
+/*Enables ODT/TE in a byte lane*/
+#undef DDR_PHY_DX8GCR1_TEEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_TEEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_TEEN_MASK 
+#define DDR_PHY_DX8GCR1_TEEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_TEEN_SHIFT                                                 10
+#define DDR_PHY_DX8GCR1_TEEN_MASK                                                  0x00000400U
+
+/*Enables Write Data strobe in a byte lane*/
+#undef DDR_PHY_DX8GCR1_DSEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DSEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_DSEN_MASK 
+#define DDR_PHY_DX8GCR1_DSEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_DSEN_SHIFT                                                 9
+#define DDR_PHY_DX8GCR1_DSEN_MASK                                                  0x00000200U
+
+/*Enables DM pin in a byte lane*/
+#undef DDR_PHY_DX8GCR1_DMEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DMEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_DMEN_MASK 
+#define DDR_PHY_DX8GCR1_DMEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_DMEN_SHIFT                                                 8
+#define DDR_PHY_DX8GCR1_DMEN_MASK                                                  0x00000100U
+
+/*Enables DQ corresponding to each bit in a byte*/
+#undef DDR_PHY_DX8GCR1_DQEN_DEFVAL 
+#undef DDR_PHY_DX8GCR1_DQEN_SHIFT 
+#undef DDR_PHY_DX8GCR1_DQEN_MASK 
+#define DDR_PHY_DX8GCR1_DQEN_DEFVAL                                                0x00007FFF
+#define DDR_PHY_DX8GCR1_DQEN_SHIFT                                                 0
+#define DDR_PHY_DX8GCR1_DQEN_MASK                                                  0x000000FFU
+
+/*Byte lane VREF IOM (Used only by D4MU IOs)*/
+#undef DDR_PHY_DX8GCR4_RESERVED_31_29_DEFVAL 
+#undef DDR_PHY_DX8GCR4_RESERVED_31_29_SHIFT 
+#undef DDR_PHY_DX8GCR4_RESERVED_31_29_MASK 
+#define DDR_PHY_DX8GCR4_RESERVED_31_29_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX8GCR4_RESERVED_31_29_SHIFT                                       29
+#define DDR_PHY_DX8GCR4_RESERVED_31_29_MASK                                        0xE0000000U
+
+/*Byte Lane VREF Pad Enable*/
+#undef DDR_PHY_DX8GCR4_DXREFPEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFPEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFPEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFPEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFPEN_SHIFT                                             28
+#define DDR_PHY_DX8GCR4_DXREFPEN_MASK                                              0x10000000U
+
+/*Byte Lane Internal VREF Enable*/
+#undef DDR_PHY_DX8GCR4_DXREFEEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFEEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFEEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFEEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFEEN_SHIFT                                             26
+#define DDR_PHY_DX8GCR4_DXREFEEN_MASK                                              0x0C000000U
+
+/*Byte Lane Single-End VREF Enable*/
+#undef DDR_PHY_DX8GCR4_DXREFSEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFSEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFSEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFSEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFSEN_SHIFT                                             25
+#define DDR_PHY_DX8GCR4_DXREFSEN_MASK                                              0x02000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR4_RESERVED_24_DEFVAL 
+#undef DDR_PHY_DX8GCR4_RESERVED_24_SHIFT 
+#undef DDR_PHY_DX8GCR4_RESERVED_24_MASK 
+#define DDR_PHY_DX8GCR4_RESERVED_24_DEFVAL                                         0x0E00003C
+#define DDR_PHY_DX8GCR4_RESERVED_24_SHIFT                                          24
+#define DDR_PHY_DX8GCR4_RESERVED_24_MASK                                           0x01000000U
+
+/*External VREF generator REFSEL range select*/
+#undef DDR_PHY_DX8GCR4_DXREFESELRANGE_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFESELRANGE_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFESELRANGE_MASK 
+#define DDR_PHY_DX8GCR4_DXREFESELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFESELRANGE_SHIFT                                       23
+#define DDR_PHY_DX8GCR4_DXREFESELRANGE_MASK                                        0x00800000U
+
+/*Byte Lane External VREF Select*/
+#undef DDR_PHY_DX8GCR4_DXREFESEL_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFESEL_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFESEL_MASK 
+#define DDR_PHY_DX8GCR4_DXREFESEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFESEL_SHIFT                                            16
+#define DDR_PHY_DX8GCR4_DXREFESEL_MASK                                             0x007F0000U
+
+/*Single ended VREF generator REFSEL range select*/
+#undef DDR_PHY_DX8GCR4_DXREFSSELRANGE_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFSSELRANGE_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFSSELRANGE_MASK 
+#define DDR_PHY_DX8GCR4_DXREFSSELRANGE_DEFVAL                                      0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFSSELRANGE_SHIFT                                       15
+#define DDR_PHY_DX8GCR4_DXREFSSELRANGE_MASK                                        0x00008000U
+
+/*Byte Lane Single-End VREF Select*/
+#undef DDR_PHY_DX8GCR4_DXREFSSEL_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFSSEL_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFSSEL_MASK 
+#define DDR_PHY_DX8GCR4_DXREFSSEL_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFSSEL_SHIFT                                            8
+#define DDR_PHY_DX8GCR4_DXREFSSEL_MASK                                             0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR4_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX8GCR4_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX8GCR4_RESERVED_7_6_MASK 
+#define DDR_PHY_DX8GCR4_RESERVED_7_6_DEFVAL                                        0x0E00003C
+#define DDR_PHY_DX8GCR4_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX8GCR4_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX8GCR4_DXREFIEN_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFIEN_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFIEN_MASK 
+#define DDR_PHY_DX8GCR4_DXREFIEN_DEFVAL                                            0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFIEN_SHIFT                                             2
+#define DDR_PHY_DX8GCR4_DXREFIEN_MASK                                              0x0000003CU
+
+/*VRMON control for DQ IO (Single Ended) buffers of a byte lane.*/
+#undef DDR_PHY_DX8GCR4_DXREFIMON_DEFVAL 
+#undef DDR_PHY_DX8GCR4_DXREFIMON_SHIFT 
+#undef DDR_PHY_DX8GCR4_DXREFIMON_MASK 
+#define DDR_PHY_DX8GCR4_DXREFIMON_DEFVAL                                           0x0E00003C
+#define DDR_PHY_DX8GCR4_DXREFIMON_SHIFT                                            0
+#define DDR_PHY_DX8GCR4_DXREFIMON_MASK                                             0x00000003U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_31_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_31_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_31_SHIFT                                          31
+#define DDR_PHY_DX8GCR5_RESERVED_31_MASK                                           0x80000000U
+
+/*Byte Lane internal VREF Select for Rank 3*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR3_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR3_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR3_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR3_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR3_SHIFT                                          24
+#define DDR_PHY_DX8GCR5_DXREFISELR3_MASK                                           0x7F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_23_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_23_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_23_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_23_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_23_SHIFT                                          23
+#define DDR_PHY_DX8GCR5_RESERVED_23_MASK                                           0x00800000U
+
+/*Byte Lane internal VREF Select for Rank 2*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR2_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR2_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR2_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT                                          16
+#define DDR_PHY_DX8GCR5_DXREFISELR2_MASK                                           0x007F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_15_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_15_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_15_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_15_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_15_SHIFT                                          15
+#define DDR_PHY_DX8GCR5_RESERVED_15_MASK                                           0x00008000U
+
+/*Byte Lane internal VREF Select for Rank 1*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR1_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR1_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR1_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT                                          8
+#define DDR_PHY_DX8GCR5_DXREFISELR1_MASK                                           0x00007F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR5_RESERVED_7_DEFVAL 
+#undef DDR_PHY_DX8GCR5_RESERVED_7_SHIFT 
+#undef DDR_PHY_DX8GCR5_RESERVED_7_MASK 
+#define DDR_PHY_DX8GCR5_RESERVED_7_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR5_RESERVED_7_SHIFT                                           7
+#define DDR_PHY_DX8GCR5_RESERVED_7_MASK                                            0x00000080U
+
+/*Byte Lane internal VREF Select for Rank 0*/
+#undef DDR_PHY_DX8GCR5_DXREFISELR0_DEFVAL 
+#undef DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT 
+#undef DDR_PHY_DX8GCR5_DXREFISELR0_MASK 
+#define DDR_PHY_DX8GCR5_DXREFISELR0_DEFVAL                                         0x09090909
+#define DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT                                          0
+#define DDR_PHY_DX8GCR5_DXREFISELR0_MASK                                           0x0000007FU
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_31_30_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_31_30_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_31_30_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_31_30_DEFVAL                                      0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_31_30_SHIFT                                       30
+#define DDR_PHY_DX8GCR6_RESERVED_31_30_MASK                                        0xC0000000U
+
+/*DRAM DQ VREF Select for Rank3*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR3_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR3_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR3_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR3_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR3_SHIFT                                           24
+#define DDR_PHY_DX8GCR6_DXDQVREFR3_MASK                                            0x3F000000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_23_22_DEFVAL                                      0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_23_22_SHIFT                                       22
+#define DDR_PHY_DX8GCR6_RESERVED_23_22_MASK                                        0x00C00000U
+
+/*DRAM DQ VREF Select for Rank2*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR2_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR2_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR2_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR2_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR2_SHIFT                                           16
+#define DDR_PHY_DX8GCR6_DXDQVREFR2_MASK                                            0x003F0000U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_15_14_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_15_14_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_15_14_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_15_14_DEFVAL                                      0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_15_14_SHIFT                                       14
+#define DDR_PHY_DX8GCR6_RESERVED_15_14_MASK                                        0x0000C000U
+
+/*DRAM DQ VREF Select for Rank1*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR1_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR1_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR1_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR1_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR1_SHIFT                                           8
+#define DDR_PHY_DX8GCR6_DXDQVREFR1_MASK                                            0x00003F00U
+
+/*Reserved. Returns zeros on reads.*/
+#undef DDR_PHY_DX8GCR6_RESERVED_7_6_DEFVAL 
+#undef DDR_PHY_DX8GCR6_RESERVED_7_6_SHIFT 
+#undef DDR_PHY_DX8GCR6_RESERVED_7_6_MASK 
+#define DDR_PHY_DX8GCR6_RESERVED_7_6_DEFVAL                                        0x09090909
+#define DDR_PHY_DX8GCR6_RESERVED_7_6_SHIFT                                         6
+#define DDR_PHY_DX8GCR6_RESERVED_7_6_MASK                                          0x000000C0U
+
+/*DRAM DQ VREF Select for Rank0*/
+#undef DDR_PHY_DX8GCR6_DXDQVREFR0_DEFVAL 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR0_SHIFT 
+#undef DDR_PHY_DX8GCR6_DXDQVREFR0_MASK 
+#define DDR_PHY_DX8GCR6_DXDQVREFR0_DEFVAL                                          0x09090909
+#define DDR_PHY_DX8GCR6_DXDQVREFR0_SHIFT                                           0
+#define DDR_PHY_DX8GCR6_DXDQVREFR0_MASK                                            0x0000003FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8LCDLR2_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8LCDLR2_RESERVED_31_25_DEFVAL                                    0x00000000
+#define DDR_PHY_DX8LCDLR2_RESERVED_31_25_SHIFT                                     25
+#define DDR_PHY_DX8LCDLR2_RESERVED_31_25_MASK                                      0xFE000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX8LCDLR2_RESERVED_24_16_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_24_16_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_24_16_MASK 
+#define DDR_PHY_DX8LCDLR2_RESERVED_24_16_DEFVAL                                    0x00000000
+#define DDR_PHY_DX8LCDLR2_RESERVED_24_16_SHIFT                                     16
+#define DDR_PHY_DX8LCDLR2_RESERVED_24_16_MASK                                      0x01FF0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8LCDLR2_RESERVED_15_9_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_15_9_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_RESERVED_15_9_MASK 
+#define DDR_PHY_DX8LCDLR2_RESERVED_15_9_DEFVAL                                     0x00000000
+#define DDR_PHY_DX8LCDLR2_RESERVED_15_9_SHIFT                                      9
+#define DDR_PHY_DX8LCDLR2_RESERVED_15_9_MASK                                       0x0000FE00U
+
+/*Read DQS Gating Delay*/
+#undef DDR_PHY_DX8LCDLR2_DQSGD_DEFVAL 
+#undef DDR_PHY_DX8LCDLR2_DQSGD_SHIFT 
+#undef DDR_PHY_DX8LCDLR2_DQSGD_MASK 
+#define DDR_PHY_DX8LCDLR2_DQSGD_DEFVAL                                             0x00000000
+#define DDR_PHY_DX8LCDLR2_DQSGD_SHIFT                                              0
+#define DDR_PHY_DX8LCDLR2_DQSGD_MASK                                               0x000001FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_31_24_DEFVAL                                      0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_31_24_SHIFT                                       27
+#define DDR_PHY_DX8GTR0_RESERVED_31_24_MASK                                        0xF8000000U
+
+/*DQ Write Path Latency Pipeline*/
+#undef DDR_PHY_DX8GTR0_WDQSL_DEFVAL 
+#undef DDR_PHY_DX8GTR0_WDQSL_SHIFT 
+#undef DDR_PHY_DX8GTR0_WDQSL_MASK 
+#define DDR_PHY_DX8GTR0_WDQSL_DEFVAL                                               0x00020000
+#define DDR_PHY_DX8GTR0_WDQSL_SHIFT                                                24
+#define DDR_PHY_DX8GTR0_WDQSL_MASK                                                 0x07000000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_23_20_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_23_20_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_23_20_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_23_20_DEFVAL                                      0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_23_20_SHIFT                                       20
+#define DDR_PHY_DX8GTR0_RESERVED_23_20_MASK                                        0x00F00000U
+
+/*Write Leveling System Latency*/
+#undef DDR_PHY_DX8GTR0_WLSL_DEFVAL 
+#undef DDR_PHY_DX8GTR0_WLSL_SHIFT 
+#undef DDR_PHY_DX8GTR0_WLSL_MASK 
+#define DDR_PHY_DX8GTR0_WLSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX8GTR0_WLSL_SHIFT                                                 16
+#define DDR_PHY_DX8GTR0_WLSL_MASK                                                  0x000F0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_15_13_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_15_13_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_15_13_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_15_13_DEFVAL                                      0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_15_13_SHIFT                                       13
+#define DDR_PHY_DX8GTR0_RESERVED_15_13_MASK                                        0x0000E000U
+
+/*Reserved. Caution, do not write to this register field.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_12_8_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_12_8_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_12_8_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_12_8_DEFVAL                                       0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_12_8_SHIFT                                        8
+#define DDR_PHY_DX8GTR0_RESERVED_12_8_MASK                                         0x00001F00U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8GTR0_RESERVED_7_5_DEFVAL 
+#undef DDR_PHY_DX8GTR0_RESERVED_7_5_SHIFT 
+#undef DDR_PHY_DX8GTR0_RESERVED_7_5_MASK 
+#define DDR_PHY_DX8GTR0_RESERVED_7_5_DEFVAL                                        0x00020000
+#define DDR_PHY_DX8GTR0_RESERVED_7_5_SHIFT                                         5
+#define DDR_PHY_DX8GTR0_RESERVED_7_5_MASK                                          0x000000E0U
+
+/*DQS Gating System Latency*/
+#undef DDR_PHY_DX8GTR0_DGSL_DEFVAL 
+#undef DDR_PHY_DX8GTR0_DGSL_SHIFT 
+#undef DDR_PHY_DX8GTR0_DGSL_MASK 
+#define DDR_PHY_DX8GTR0_DGSL_DEFVAL                                                0x00020000
+#define DDR_PHY_DX8GTR0_DGSL_SHIFT                                                 0
+#define DDR_PHY_DX8GTR0_DGSL_MASK                                                  0x0000001FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL0DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL0DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL0DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL0DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL0DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL0DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL0DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL0DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL0DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL0DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL0DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL0DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL0DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL0DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL0DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL0DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL0DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL0DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL0DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL0DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL0DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL0DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL0DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL0DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL0DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL0DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL0DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL0DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL0IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL0IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL0IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL0IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL0IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL0IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL0IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL0IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL0IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL0IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL0IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL0IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL0IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL0IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL0IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL0IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL1DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL1DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL1DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL1DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL1DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL1DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL1DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL1DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL1DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL1DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL1DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL1DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL1DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL1DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL1DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL1DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL1DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL1DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL1DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL1DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL1DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL1DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL1DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL1DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL1DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL1DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL1DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL1DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL1IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL1IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL1IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL1IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL1IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL1IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL1IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL1IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL1IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL1IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL1IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL1IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL1IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL1IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL1IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL1IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL2DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL2DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL2DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL2DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL2DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL2DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL2DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL2DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL2DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL2DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL2DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL2DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL2DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL2DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL2DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL2DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL2DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL2DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL2DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL2DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL2DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL2DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL2DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL2DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL2DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL2DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL2DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL2DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL2IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL2IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL2IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL2IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL2IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL2IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL2IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL2IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL2IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL2IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL2IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL2IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL2IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL2IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL2IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL2IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL3DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL3DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL3DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL3DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL3DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL3DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL3DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL3DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL3DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL3DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL3DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL3DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL3DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL3DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL3DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL3DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL3DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL3DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL3DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL3DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL3DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL3DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL3DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL3DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL3DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL3DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL3DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL3DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL3IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL3IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL3IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL3IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL3IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL3IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL3IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL3IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL3IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL3IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL3IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL3IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL3IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL3IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL3IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL3IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL4DQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SL4DQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_WRRMODE_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SL4DQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DQSGX_DEFVAL                                          0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SL4DQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_LPPLLPD_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SL4DQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_LPIOPD_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SL4DQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_QSCNTEN_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SL4DQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_UDQIOM_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_DEFVAL                                 0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SL4DQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DXSR_DEFVAL                                           0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SL4DQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS_N Resistor*/
+#undef DDR_PHY_DX8SL4DQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DQSNRES_DEFVAL                                        0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SL4DQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SL4DQSCTL_DQSRES_DEFVAL                                         0x01264000
+#define DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT                                  24
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK                                   0xFF000000U
+
+/*Configurable Read Data Enable*/
+#undef DDR_PHY_DX8SL4DXCTL2_CRDEN_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_CRDEN_DEFVAL                                          0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT                                           23
+#define DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK                                            0x00800000U
+
+/*OX Extension during Post-amble*/
+#undef DDR_PHY_DX8SL4DXCTL2_POSOEX_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_POSOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT                                          20
+#define DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK                                           0x00700000U
+
+/*OE Extension during Pre-amble*/
+#undef DDR_PHY_DX8SL4DXCTL2_PREOEX_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_PREOEX_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT                                          18
+#define DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK                                           0x000C0000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_17_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_17_DEFVAL                                    0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT                                     17
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK                                      0x00020000U
+
+/*I/O Assisted Gate Select*/
+#undef DDR_PHY_DX8SL4DXCTL2_IOAG_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_IOAG_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_IOAG_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT                                            16
+#define DDR_PHY_DX8SL4DXCTL2_IOAG_MASK                                             0x00010000U
+
+/*I/O Loopback Select*/
+#undef DDR_PHY_DX8SL4DXCTL2_IOLB_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_IOLB_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_IOLB_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT                                            15
+#define DDR_PHY_DX8SL4DXCTL2_IOLB_MASK                                             0x00008000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_SHIFT                                  13
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK                                   0x00006000U
+
+/*Low Power Wakeup Threshold*/
+#undef DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_DEFVAL                                 0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_SHIFT                                  9
+#define DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK                                   0x00001E00U
+
+/*Read Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL4DXCTL2_RDBI_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RDBI_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RDBI_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RDBI_SHIFT                                            8
+#define DDR_PHY_DX8SL4DXCTL2_RDBI_MASK                                             0x00000100U
+
+/*Write Data Bus Inversion Enable*/
+#undef DDR_PHY_DX8SL4DXCTL2_WDBI_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_WDBI_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_WDBI_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_WDBI_DEFVAL                                           0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_WDBI_SHIFT                                            7
+#define DDR_PHY_DX8SL4DXCTL2_WDBI_MASK                                             0x00000080U
+
+/*PUB Read FIFO Bypass*/
+#undef DDR_PHY_DX8SL4DXCTL2_PRFBYP_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_PRFBYP_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_PRFBYP_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_PRFBYP_SHIFT                                          6
+#define DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK                                           0x00000040U
+
+/*DATX8 Receive FIFO Read Mode*/
+#undef DDR_PHY_DX8SL4DXCTL2_RDMODE_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RDMODE_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RDMODE_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RDMODE_SHIFT                                          4
+#define DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK                                           0x00000030U
+
+/*Disables the Read FIFO Reset*/
+#undef DDR_PHY_DX8SL4DXCTL2_DISRST_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_DISRST_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_DISRST_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_DISRST_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_DISRST_SHIFT                                          3
+#define DDR_PHY_DX8SL4DXCTL2_DISRST_MASK                                           0x00000008U
+
+/*Read DQS Gate I/O Loopback*/
+#undef DDR_PHY_DX8SL4DXCTL2_DQSGLB_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_DQSGLB_DEFVAL                                         0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT                                          1
+#define DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK                                           0x00000006U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_0_DEFVAL 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT 
+#undef DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK 
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_0_DEFVAL                                     0x00141800
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT                                      0
+#define DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK                                       0x00000001U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SL4IOCR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_RESERVED_31_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_RESERVED_31_MASK 
+#define DDR_PHY_DX8SL4IOCR_RESERVED_31_DEFVAL                                      0x00000000
+#define DDR_PHY_DX8SL4IOCR_RESERVED_31_SHIFT                                       31
+#define DDR_PHY_DX8SL4IOCR_RESERVED_31_MASK                                        0x80000000U
+
+/*PVREF_DAC REFSEL range select*/
+#undef DDR_PHY_DX8SL4IOCR_DXDACRANGE_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXDACRANGE_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXDACRANGE_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXDACRANGE_DEFVAL                                       0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXDACRANGE_SHIFT                                        28
+#define DDR_PHY_DX8SL4IOCR_DXDACRANGE_MASK                                         0x70000000U
+
+/*IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring*/
+#undef DDR_PHY_DX8SL4IOCR_DXVREFIOM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXVREFIOM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXVREFIOM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXVREFIOM_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXVREFIOM_SHIFT                                         25
+#define DDR_PHY_DX8SL4IOCR_DXVREFIOM_MASK                                          0x0E000000U
+
+/*DX IO Mode*/
+#undef DDR_PHY_DX8SL4IOCR_DXIOM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXIOM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXIOM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXIOM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXIOM_SHIFT                                             22
+#define DDR_PHY_DX8SL4IOCR_DXIOM_MASK                                              0x01C00000U
+
+/*DX IO Transmitter Mode*/
+#undef DDR_PHY_DX8SL4IOCR_DXTXM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXTXM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXTXM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXTXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXTXM_SHIFT                                             11
+#define DDR_PHY_DX8SL4IOCR_DXTXM_MASK                                              0x003FF800U
+
+/*DX IO Receiver Mode*/
+#undef DDR_PHY_DX8SL4IOCR_DXRXM_DEFVAL 
+#undef DDR_PHY_DX8SL4IOCR_DXRXM_SHIFT 
+#undef DDR_PHY_DX8SL4IOCR_DXRXM_MASK 
+#define DDR_PHY_DX8SL4IOCR_DXRXM_DEFVAL                                            0x00000000
+#define DDR_PHY_DX8SL4IOCR_DXRXM_SHIFT                                             0
+#define DDR_PHY_DX8SL4IOCR_DXRXM_MASK                                              0x000007FFU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_SHIFT                                  25
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_MASK                                   0xFE000000U
+
+/*Read Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SLBDQSCTL_RRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RRRMODE_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RRRMODE_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RRRMODE_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RRRMODE_SHIFT                                         24
+#define DDR_PHY_DX8SLBDQSCTL_RRRMODE_MASK                                          0x01000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_SHIFT                                  22
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_MASK                                   0x00C00000U
+
+/*Write Path Rise-to-Rise Mode*/
+#undef DDR_PHY_DX8SLBDQSCTL_WRRMODE_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_WRRMODE_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_WRRMODE_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_WRRMODE_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_WRRMODE_SHIFT                                         21
+#define DDR_PHY_DX8SLBDQSCTL_WRRMODE_MASK                                          0x00200000U
+
+/*DQS Gate Extension*/
+#undef DDR_PHY_DX8SLBDQSCTL_DQSGX_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSGX_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSGX_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DQSGX_DEFVAL                                          0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DQSGX_SHIFT                                           19
+#define DDR_PHY_DX8SLBDQSCTL_DQSGX_MASK                                            0x00180000U
+
+/*Low Power PLL Power Down*/
+#undef DDR_PHY_DX8SLBDQSCTL_LPPLLPD_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_LPPLLPD_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_LPPLLPD_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_LPPLLPD_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_LPPLLPD_SHIFT                                         18
+#define DDR_PHY_DX8SLBDQSCTL_LPPLLPD_MASK                                          0x00040000U
+
+/*Low Power I/O Power Down*/
+#undef DDR_PHY_DX8SLBDQSCTL_LPIOPD_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_LPIOPD_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_LPIOPD_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_LPIOPD_DEFVAL                                         0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_LPIOPD_SHIFT                                          17
+#define DDR_PHY_DX8SLBDQSCTL_LPIOPD_MASK                                           0x00020000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_SHIFT                                  15
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_MASK                                   0x00018000U
+
+/*QS Counter Enable*/
+#undef DDR_PHY_DX8SLBDQSCTL_QSCNTEN_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_QSCNTEN_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_QSCNTEN_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_QSCNTEN_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_QSCNTEN_SHIFT                                         14
+#define DDR_PHY_DX8SLBDQSCTL_QSCNTEN_MASK                                          0x00004000U
+
+/*Unused DQ I/O Mode*/
+#undef DDR_PHY_DX8SLBDQSCTL_UDQIOM_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_UDQIOM_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_UDQIOM_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_UDQIOM_DEFVAL                                         0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_UDQIOM_SHIFT                                          13
+#define DDR_PHY_DX8SLBDQSCTL_UDQIOM_MASK                                           0x00002000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_DEFVAL                                 0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_SHIFT                                  10
+#define DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_MASK                                   0x00001C00U
+
+/*Data Slew Rate*/
+#undef DDR_PHY_DX8SLBDQSCTL_DXSR_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DXSR_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DXSR_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DXSR_DEFVAL                                           0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DXSR_SHIFT                                            8
+#define DDR_PHY_DX8SLBDQSCTL_DXSR_MASK                                             0x00000300U
+
+/*DQS# Resistor*/
+#undef DDR_PHY_DX8SLBDQSCTL_DQSNRES_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSNRES_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSNRES_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DQSNRES_DEFVAL                                        0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DQSNRES_SHIFT                                         4
+#define DDR_PHY_DX8SLBDQSCTL_DQSNRES_MASK                                          0x000000F0U
+
+/*DQS Resistor*/
+#undef DDR_PHY_DX8SLBDQSCTL_DQSRES_DEFVAL 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSRES_SHIFT 
+#undef DDR_PHY_DX8SLBDQSCTL_DQSRES_MASK 
+#define DDR_PHY_DX8SLBDQSCTL_DQSRES_DEFVAL                                         0x00000000
+#define DDR_PHY_DX8SLBDQSCTL_DQSRES_SHIFT                                          0
+#define DDR_PHY_DX8SLBDQSCTL_DQSRES_MASK                                           0x0000000FU
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PIR_RESERVED_31_DEFVAL 
+#undef DDR_PHY_PIR_RESERVED_31_SHIFT 
+#undef DDR_PHY_PIR_RESERVED_31_MASK 
+#define DDR_PHY_PIR_RESERVED_31_DEFVAL                                             0x00000000
+#define DDR_PHY_PIR_RESERVED_31_SHIFT                                              31
+#define DDR_PHY_PIR_RESERVED_31_MASK                                               0x80000000U
+
+/*Impedance Calibration Bypass*/
+#undef DDR_PHY_PIR_ZCALBYP_DEFVAL 
+#undef DDR_PHY_PIR_ZCALBYP_SHIFT 
+#undef DDR_PHY_PIR_ZCALBYP_MASK 
+#define DDR_PHY_PIR_ZCALBYP_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_ZCALBYP_SHIFT                                                  30
+#define DDR_PHY_PIR_ZCALBYP_MASK                                                   0x40000000U
+
+/*Digital Delay Line (DDL) Calibration Pause*/
+#undef DDR_PHY_PIR_DCALPSE_DEFVAL 
+#undef DDR_PHY_PIR_DCALPSE_SHIFT 
+#undef DDR_PHY_PIR_DCALPSE_MASK 
+#define DDR_PHY_PIR_DCALPSE_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_DCALPSE_SHIFT                                                  29
+#define DDR_PHY_PIR_DCALPSE_MASK                                                   0x20000000U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PIR_RESERVED_28_21_DEFVAL 
+#undef DDR_PHY_PIR_RESERVED_28_21_SHIFT 
+#undef DDR_PHY_PIR_RESERVED_28_21_MASK 
+#define DDR_PHY_PIR_RESERVED_28_21_DEFVAL                                          0x00000000
+#define DDR_PHY_PIR_RESERVED_28_21_SHIFT                                           21
+#define DDR_PHY_PIR_RESERVED_28_21_MASK                                            0x1FE00000U
+
+/*Write DQS2DQ Training*/
+#undef DDR_PHY_PIR_DQS2DQ_DEFVAL 
+#undef DDR_PHY_PIR_DQS2DQ_SHIFT 
+#undef DDR_PHY_PIR_DQS2DQ_MASK 
+#define DDR_PHY_PIR_DQS2DQ_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_DQS2DQ_SHIFT                                                   20
+#define DDR_PHY_PIR_DQS2DQ_MASK                                                    0x00100000U
+
+/*RDIMM Initialization*/
+#undef DDR_PHY_PIR_RDIMMINIT_DEFVAL 
+#undef DDR_PHY_PIR_RDIMMINIT_SHIFT 
+#undef DDR_PHY_PIR_RDIMMINIT_MASK 
+#define DDR_PHY_PIR_RDIMMINIT_DEFVAL                                               0x00000000
+#define DDR_PHY_PIR_RDIMMINIT_SHIFT                                                19
+#define DDR_PHY_PIR_RDIMMINIT_MASK                                                 0x00080000U
+
+/*Controller DRAM Initialization*/
+#undef DDR_PHY_PIR_CTLDINIT_DEFVAL 
+#undef DDR_PHY_PIR_CTLDINIT_SHIFT 
+#undef DDR_PHY_PIR_CTLDINIT_MASK 
+#define DDR_PHY_PIR_CTLDINIT_DEFVAL                                                0x00000000
+#define DDR_PHY_PIR_CTLDINIT_SHIFT                                                 18
+#define DDR_PHY_PIR_CTLDINIT_MASK                                                  0x00040000U
+
+/*VREF Training*/
+#undef DDR_PHY_PIR_VREF_DEFVAL 
+#undef DDR_PHY_PIR_VREF_SHIFT 
+#undef DDR_PHY_PIR_VREF_MASK 
+#define DDR_PHY_PIR_VREF_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_VREF_SHIFT                                                     17
+#define DDR_PHY_PIR_VREF_MASK                                                      0x00020000U
+
+/*Static Read Training*/
+#undef DDR_PHY_PIR_SRD_DEFVAL 
+#undef DDR_PHY_PIR_SRD_SHIFT 
+#undef DDR_PHY_PIR_SRD_MASK 
+#define DDR_PHY_PIR_SRD_DEFVAL                                                     0x00000000
+#define DDR_PHY_PIR_SRD_SHIFT                                                      16
+#define DDR_PHY_PIR_SRD_MASK                                                       0x00010000U
+
+/*Write Data Eye Training*/
+#undef DDR_PHY_PIR_WREYE_DEFVAL 
+#undef DDR_PHY_PIR_WREYE_SHIFT 
+#undef DDR_PHY_PIR_WREYE_MASK 
+#define DDR_PHY_PIR_WREYE_DEFVAL                                                   0x00000000
+#define DDR_PHY_PIR_WREYE_SHIFT                                                    15
+#define DDR_PHY_PIR_WREYE_MASK                                                     0x00008000U
+
+/*Read Data Eye Training*/
+#undef DDR_PHY_PIR_RDEYE_DEFVAL 
+#undef DDR_PHY_PIR_RDEYE_SHIFT 
+#undef DDR_PHY_PIR_RDEYE_MASK 
+#define DDR_PHY_PIR_RDEYE_DEFVAL                                                   0x00000000
+#define DDR_PHY_PIR_RDEYE_SHIFT                                                    14
+#define DDR_PHY_PIR_RDEYE_MASK                                                     0x00004000U
+
+/*Write Data Bit Deskew*/
+#undef DDR_PHY_PIR_WRDSKW_DEFVAL 
+#undef DDR_PHY_PIR_WRDSKW_SHIFT 
+#undef DDR_PHY_PIR_WRDSKW_MASK 
+#define DDR_PHY_PIR_WRDSKW_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_WRDSKW_SHIFT                                                   13
+#define DDR_PHY_PIR_WRDSKW_MASK                                                    0x00002000U
+
+/*Read Data Bit Deskew*/
+#undef DDR_PHY_PIR_RDDSKW_DEFVAL 
+#undef DDR_PHY_PIR_RDDSKW_SHIFT 
+#undef DDR_PHY_PIR_RDDSKW_MASK 
+#define DDR_PHY_PIR_RDDSKW_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_RDDSKW_SHIFT                                                   12
+#define DDR_PHY_PIR_RDDSKW_MASK                                                    0x00001000U
+
+/*Write Leveling Adjust*/
+#undef DDR_PHY_PIR_WLADJ_DEFVAL 
+#undef DDR_PHY_PIR_WLADJ_SHIFT 
+#undef DDR_PHY_PIR_WLADJ_MASK 
+#define DDR_PHY_PIR_WLADJ_DEFVAL                                                   0x00000000
+#define DDR_PHY_PIR_WLADJ_SHIFT                                                    11
+#define DDR_PHY_PIR_WLADJ_MASK                                                     0x00000800U
+
+/*Read DQS Gate Training*/
+#undef DDR_PHY_PIR_QSGATE_DEFVAL 
+#undef DDR_PHY_PIR_QSGATE_SHIFT 
+#undef DDR_PHY_PIR_QSGATE_MASK 
+#define DDR_PHY_PIR_QSGATE_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_QSGATE_SHIFT                                                   10
+#define DDR_PHY_PIR_QSGATE_MASK                                                    0x00000400U
+
+/*Write Leveling*/
+#undef DDR_PHY_PIR_WL_DEFVAL 
+#undef DDR_PHY_PIR_WL_SHIFT 
+#undef DDR_PHY_PIR_WL_MASK 
+#define DDR_PHY_PIR_WL_DEFVAL                                                      0x00000000
+#define DDR_PHY_PIR_WL_SHIFT                                                       9
+#define DDR_PHY_PIR_WL_MASK                                                        0x00000200U
+
+/*DRAM Initialization*/
+#undef DDR_PHY_PIR_DRAMINIT_DEFVAL 
+#undef DDR_PHY_PIR_DRAMINIT_SHIFT 
+#undef DDR_PHY_PIR_DRAMINIT_MASK 
+#define DDR_PHY_PIR_DRAMINIT_DEFVAL                                                0x00000000
+#define DDR_PHY_PIR_DRAMINIT_SHIFT                                                 8
+#define DDR_PHY_PIR_DRAMINIT_MASK                                                  0x00000100U
+
+/*DRAM Reset (DDR3/DDR4/LPDDR4 Only)*/
+#undef DDR_PHY_PIR_DRAMRST_DEFVAL 
+#undef DDR_PHY_PIR_DRAMRST_SHIFT 
+#undef DDR_PHY_PIR_DRAMRST_MASK 
+#define DDR_PHY_PIR_DRAMRST_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_DRAMRST_SHIFT                                                  7
+#define DDR_PHY_PIR_DRAMRST_MASK                                                   0x00000080U
+
+/*PHY Reset*/
+#undef DDR_PHY_PIR_PHYRST_DEFVAL 
+#undef DDR_PHY_PIR_PHYRST_SHIFT 
+#undef DDR_PHY_PIR_PHYRST_MASK 
+#define DDR_PHY_PIR_PHYRST_DEFVAL                                                  0x00000000
+#define DDR_PHY_PIR_PHYRST_SHIFT                                                   6
+#define DDR_PHY_PIR_PHYRST_MASK                                                    0x00000040U
+
+/*Digital Delay Line (DDL) Calibration*/
+#undef DDR_PHY_PIR_DCAL_DEFVAL 
+#undef DDR_PHY_PIR_DCAL_SHIFT 
+#undef DDR_PHY_PIR_DCAL_MASK 
+#define DDR_PHY_PIR_DCAL_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_DCAL_SHIFT                                                     5
+#define DDR_PHY_PIR_DCAL_MASK                                                      0x00000020U
+
+/*PLL Initialiazation*/
+#undef DDR_PHY_PIR_PLLINIT_DEFVAL 
+#undef DDR_PHY_PIR_PLLINIT_SHIFT 
+#undef DDR_PHY_PIR_PLLINIT_MASK 
+#define DDR_PHY_PIR_PLLINIT_DEFVAL                                                 0x00000000
+#define DDR_PHY_PIR_PLLINIT_SHIFT                                                  4
+#define DDR_PHY_PIR_PLLINIT_MASK                                                   0x00000010U
+
+/*Reserved. Return zeroes on reads.*/
+#undef DDR_PHY_PIR_RESERVED_3_DEFVAL 
+#undef DDR_PHY_PIR_RESERVED_3_SHIFT 
+#undef DDR_PHY_PIR_RESERVED_3_MASK 
+#define DDR_PHY_PIR_RESERVED_3_DEFVAL                                              0x00000000
+#define DDR_PHY_PIR_RESERVED_3_SHIFT                                               3
+#define DDR_PHY_PIR_RESERVED_3_MASK                                                0x00000008U
+
+/*CA Training*/
+#undef DDR_PHY_PIR_CA_DEFVAL 
+#undef DDR_PHY_PIR_CA_SHIFT 
+#undef DDR_PHY_PIR_CA_MASK 
+#define DDR_PHY_PIR_CA_DEFVAL                                                      0x00000000
+#define DDR_PHY_PIR_CA_SHIFT                                                       2
+#define DDR_PHY_PIR_CA_MASK                                                        0x00000004U
+
+/*Impedance Calibration*/
+#undef DDR_PHY_PIR_ZCAL_DEFVAL 
+#undef DDR_PHY_PIR_ZCAL_SHIFT 
+#undef DDR_PHY_PIR_ZCAL_MASK 
+#define DDR_PHY_PIR_ZCAL_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_ZCAL_SHIFT                                                     1
+#define DDR_PHY_PIR_ZCAL_MASK                                                      0x00000002U
+
+/*Initialization Trigger*/
+#undef DDR_PHY_PIR_INIT_DEFVAL 
+#undef DDR_PHY_PIR_INIT_SHIFT 
+#undef DDR_PHY_PIR_INIT_MASK 
+#define DDR_PHY_PIR_INIT_DEFVAL                                                    0x00000000
+#define DDR_PHY_PIR_INIT_SHIFT                                                     0
+#define DDR_PHY_PIR_INIT_MASK                                                      0x00000001U
+#undef IOU_SLCR_MIO_PIN_0_OFFSET 
+#define IOU_SLCR_MIO_PIN_0_OFFSET                                                  0XFF180000
+#undef IOU_SLCR_MIO_PIN_1_OFFSET 
+#define IOU_SLCR_MIO_PIN_1_OFFSET                                                  0XFF180004
+#undef IOU_SLCR_MIO_PIN_2_OFFSET 
+#define IOU_SLCR_MIO_PIN_2_OFFSET                                                  0XFF180008
+#undef IOU_SLCR_MIO_PIN_3_OFFSET 
+#define IOU_SLCR_MIO_PIN_3_OFFSET                                                  0XFF18000C
+#undef IOU_SLCR_MIO_PIN_4_OFFSET 
+#define IOU_SLCR_MIO_PIN_4_OFFSET                                                  0XFF180010
+#undef IOU_SLCR_MIO_PIN_5_OFFSET 
+#define IOU_SLCR_MIO_PIN_5_OFFSET                                                  0XFF180014
+#undef IOU_SLCR_MIO_PIN_6_OFFSET 
+#define IOU_SLCR_MIO_PIN_6_OFFSET                                                  0XFF180018
+#undef IOU_SLCR_MIO_PIN_7_OFFSET 
+#define IOU_SLCR_MIO_PIN_7_OFFSET                                                  0XFF18001C
+#undef IOU_SLCR_MIO_PIN_8_OFFSET 
+#define IOU_SLCR_MIO_PIN_8_OFFSET                                                  0XFF180020
+#undef IOU_SLCR_MIO_PIN_9_OFFSET 
+#define IOU_SLCR_MIO_PIN_9_OFFSET                                                  0XFF180024
+#undef IOU_SLCR_MIO_PIN_10_OFFSET 
+#define IOU_SLCR_MIO_PIN_10_OFFSET                                                 0XFF180028
+#undef IOU_SLCR_MIO_PIN_11_OFFSET 
+#define IOU_SLCR_MIO_PIN_11_OFFSET                                                 0XFF18002C
+#undef IOU_SLCR_MIO_PIN_12_OFFSET 
+#define IOU_SLCR_MIO_PIN_12_OFFSET                                                 0XFF180030
+#undef IOU_SLCR_MIO_PIN_13_OFFSET 
+#define IOU_SLCR_MIO_PIN_13_OFFSET                                                 0XFF180034
+#undef IOU_SLCR_MIO_PIN_14_OFFSET 
+#define IOU_SLCR_MIO_PIN_14_OFFSET                                                 0XFF180038
+#undef IOU_SLCR_MIO_PIN_15_OFFSET 
+#define IOU_SLCR_MIO_PIN_15_OFFSET                                                 0XFF18003C
+#undef IOU_SLCR_MIO_PIN_16_OFFSET 
+#define IOU_SLCR_MIO_PIN_16_OFFSET                                                 0XFF180040
+#undef IOU_SLCR_MIO_PIN_17_OFFSET 
+#define IOU_SLCR_MIO_PIN_17_OFFSET                                                 0XFF180044
+#undef IOU_SLCR_MIO_PIN_18_OFFSET 
+#define IOU_SLCR_MIO_PIN_18_OFFSET                                                 0XFF180048
+#undef IOU_SLCR_MIO_PIN_19_OFFSET 
+#define IOU_SLCR_MIO_PIN_19_OFFSET                                                 0XFF18004C
+#undef IOU_SLCR_MIO_PIN_20_OFFSET 
+#define IOU_SLCR_MIO_PIN_20_OFFSET                                                 0XFF180050
+#undef IOU_SLCR_MIO_PIN_21_OFFSET 
+#define IOU_SLCR_MIO_PIN_21_OFFSET                                                 0XFF180054
+#undef IOU_SLCR_MIO_PIN_22_OFFSET 
+#define IOU_SLCR_MIO_PIN_22_OFFSET                                                 0XFF180058
+#undef IOU_SLCR_MIO_PIN_23_OFFSET 
+#define IOU_SLCR_MIO_PIN_23_OFFSET                                                 0XFF18005C
+#undef IOU_SLCR_MIO_PIN_24_OFFSET 
+#define IOU_SLCR_MIO_PIN_24_OFFSET                                                 0XFF180060
+#undef IOU_SLCR_MIO_PIN_25_OFFSET 
+#define IOU_SLCR_MIO_PIN_25_OFFSET                                                 0XFF180064
+#undef IOU_SLCR_MIO_PIN_26_OFFSET 
+#define IOU_SLCR_MIO_PIN_26_OFFSET                                                 0XFF180068
+#undef IOU_SLCR_MIO_PIN_27_OFFSET 
+#define IOU_SLCR_MIO_PIN_27_OFFSET                                                 0XFF18006C
+#undef IOU_SLCR_MIO_PIN_28_OFFSET 
+#define IOU_SLCR_MIO_PIN_28_OFFSET                                                 0XFF180070
+#undef IOU_SLCR_MIO_PIN_29_OFFSET 
+#define IOU_SLCR_MIO_PIN_29_OFFSET                                                 0XFF180074
+#undef IOU_SLCR_MIO_PIN_30_OFFSET 
+#define IOU_SLCR_MIO_PIN_30_OFFSET                                                 0XFF180078
+#undef IOU_SLCR_MIO_PIN_31_OFFSET 
+#define IOU_SLCR_MIO_PIN_31_OFFSET                                                 0XFF18007C
+#undef IOU_SLCR_MIO_PIN_32_OFFSET 
+#define IOU_SLCR_MIO_PIN_32_OFFSET                                                 0XFF180080
+#undef IOU_SLCR_MIO_PIN_33_OFFSET 
+#define IOU_SLCR_MIO_PIN_33_OFFSET                                                 0XFF180084
+#undef IOU_SLCR_MIO_PIN_34_OFFSET 
+#define IOU_SLCR_MIO_PIN_34_OFFSET                                                 0XFF180088
+#undef IOU_SLCR_MIO_PIN_35_OFFSET 
+#define IOU_SLCR_MIO_PIN_35_OFFSET                                                 0XFF18008C
+#undef IOU_SLCR_MIO_PIN_36_OFFSET 
+#define IOU_SLCR_MIO_PIN_36_OFFSET                                                 0XFF180090
+#undef IOU_SLCR_MIO_PIN_37_OFFSET 
+#define IOU_SLCR_MIO_PIN_37_OFFSET                                                 0XFF180094
+#undef IOU_SLCR_MIO_PIN_38_OFFSET 
+#define IOU_SLCR_MIO_PIN_38_OFFSET                                                 0XFF180098
+#undef IOU_SLCR_MIO_PIN_39_OFFSET 
+#define IOU_SLCR_MIO_PIN_39_OFFSET                                                 0XFF18009C
+#undef IOU_SLCR_MIO_PIN_40_OFFSET 
+#define IOU_SLCR_MIO_PIN_40_OFFSET                                                 0XFF1800A0
+#undef IOU_SLCR_MIO_PIN_41_OFFSET 
+#define IOU_SLCR_MIO_PIN_41_OFFSET                                                 0XFF1800A4
+#undef IOU_SLCR_MIO_PIN_42_OFFSET 
+#define IOU_SLCR_MIO_PIN_42_OFFSET                                                 0XFF1800A8
+#undef IOU_SLCR_MIO_PIN_43_OFFSET 
+#define IOU_SLCR_MIO_PIN_43_OFFSET                                                 0XFF1800AC
+#undef IOU_SLCR_MIO_PIN_44_OFFSET 
+#define IOU_SLCR_MIO_PIN_44_OFFSET                                                 0XFF1800B0
+#undef IOU_SLCR_MIO_PIN_45_OFFSET 
+#define IOU_SLCR_MIO_PIN_45_OFFSET                                                 0XFF1800B4
+#undef IOU_SLCR_MIO_PIN_46_OFFSET 
+#define IOU_SLCR_MIO_PIN_46_OFFSET                                                 0XFF1800B8
+#undef IOU_SLCR_MIO_PIN_47_OFFSET 
+#define IOU_SLCR_MIO_PIN_47_OFFSET                                                 0XFF1800BC
+#undef IOU_SLCR_MIO_PIN_48_OFFSET 
+#define IOU_SLCR_MIO_PIN_48_OFFSET                                                 0XFF1800C0
+#undef IOU_SLCR_MIO_PIN_49_OFFSET 
+#define IOU_SLCR_MIO_PIN_49_OFFSET                                                 0XFF1800C4
+#undef IOU_SLCR_MIO_PIN_50_OFFSET 
+#define IOU_SLCR_MIO_PIN_50_OFFSET                                                 0XFF1800C8
+#undef IOU_SLCR_MIO_PIN_51_OFFSET 
+#define IOU_SLCR_MIO_PIN_51_OFFSET                                                 0XFF1800CC
+#undef IOU_SLCR_MIO_PIN_52_OFFSET 
+#define IOU_SLCR_MIO_PIN_52_OFFSET                                                 0XFF1800D0
+#undef IOU_SLCR_MIO_PIN_53_OFFSET 
+#define IOU_SLCR_MIO_PIN_53_OFFSET                                                 0XFF1800D4
+#undef IOU_SLCR_MIO_PIN_54_OFFSET 
+#define IOU_SLCR_MIO_PIN_54_OFFSET                                                 0XFF1800D8
+#undef IOU_SLCR_MIO_PIN_55_OFFSET 
+#define IOU_SLCR_MIO_PIN_55_OFFSET                                                 0XFF1800DC
+#undef IOU_SLCR_MIO_PIN_56_OFFSET 
+#define IOU_SLCR_MIO_PIN_56_OFFSET                                                 0XFF1800E0
+#undef IOU_SLCR_MIO_PIN_57_OFFSET 
+#define IOU_SLCR_MIO_PIN_57_OFFSET                                                 0XFF1800E4
+#undef IOU_SLCR_MIO_PIN_58_OFFSET 
+#define IOU_SLCR_MIO_PIN_58_OFFSET                                                 0XFF1800E8
+#undef IOU_SLCR_MIO_PIN_59_OFFSET 
+#define IOU_SLCR_MIO_PIN_59_OFFSET                                                 0XFF1800EC
+#undef IOU_SLCR_MIO_PIN_60_OFFSET 
+#define IOU_SLCR_MIO_PIN_60_OFFSET                                                 0XFF1800F0
+#undef IOU_SLCR_MIO_PIN_61_OFFSET 
+#define IOU_SLCR_MIO_PIN_61_OFFSET                                                 0XFF1800F4
+#undef IOU_SLCR_MIO_PIN_62_OFFSET 
+#define IOU_SLCR_MIO_PIN_62_OFFSET                                                 0XFF1800F8
+#undef IOU_SLCR_MIO_PIN_63_OFFSET 
+#define IOU_SLCR_MIO_PIN_63_OFFSET                                                 0XFF1800FC
+#undef IOU_SLCR_MIO_PIN_64_OFFSET 
+#define IOU_SLCR_MIO_PIN_64_OFFSET                                                 0XFF180100
+#undef IOU_SLCR_MIO_PIN_65_OFFSET 
+#define IOU_SLCR_MIO_PIN_65_OFFSET                                                 0XFF180104
+#undef IOU_SLCR_MIO_PIN_66_OFFSET 
+#define IOU_SLCR_MIO_PIN_66_OFFSET                                                 0XFF180108
+#undef IOU_SLCR_MIO_PIN_67_OFFSET 
+#define IOU_SLCR_MIO_PIN_67_OFFSET                                                 0XFF18010C
+#undef IOU_SLCR_MIO_PIN_68_OFFSET 
+#define IOU_SLCR_MIO_PIN_68_OFFSET                                                 0XFF180110
+#undef IOU_SLCR_MIO_PIN_69_OFFSET 
+#define IOU_SLCR_MIO_PIN_69_OFFSET                                                 0XFF180114
+#undef IOU_SLCR_MIO_PIN_70_OFFSET 
+#define IOU_SLCR_MIO_PIN_70_OFFSET                                                 0XFF180118
+#undef IOU_SLCR_MIO_PIN_71_OFFSET 
+#define IOU_SLCR_MIO_PIN_71_OFFSET                                                 0XFF18011C
+#undef IOU_SLCR_MIO_PIN_72_OFFSET 
+#define IOU_SLCR_MIO_PIN_72_OFFSET                                                 0XFF180120
+#undef IOU_SLCR_MIO_PIN_73_OFFSET 
+#define IOU_SLCR_MIO_PIN_73_OFFSET                                                 0XFF180124
+#undef IOU_SLCR_MIO_PIN_74_OFFSET 
+#define IOU_SLCR_MIO_PIN_74_OFFSET                                                 0XFF180128
+#undef IOU_SLCR_MIO_PIN_75_OFFSET 
+#define IOU_SLCR_MIO_PIN_75_OFFSET                                                 0XFF18012C
+#undef IOU_SLCR_MIO_PIN_76_OFFSET 
+#define IOU_SLCR_MIO_PIN_76_OFFSET                                                 0XFF180130
+#undef IOU_SLCR_MIO_PIN_77_OFFSET 
+#define IOU_SLCR_MIO_PIN_77_OFFSET                                                 0XFF180134
+#undef IOU_SLCR_MIO_MST_TRI0_OFFSET 
+#define IOU_SLCR_MIO_MST_TRI0_OFFSET                                               0XFF180204
+#undef IOU_SLCR_MIO_MST_TRI1_OFFSET 
+#define IOU_SLCR_MIO_MST_TRI1_OFFSET                                               0XFF180208
+#undef IOU_SLCR_MIO_MST_TRI2_OFFSET 
+#define IOU_SLCR_MIO_MST_TRI2_OFFSET                                               0XFF18020C
+#undef IOU_SLCR_BANK0_CTRL0_OFFSET 
+#define IOU_SLCR_BANK0_CTRL0_OFFSET                                                0XFF180138
+#undef IOU_SLCR_BANK0_CTRL1_OFFSET 
+#define IOU_SLCR_BANK0_CTRL1_OFFSET                                                0XFF18013C
+#undef IOU_SLCR_BANK0_CTRL3_OFFSET 
+#define IOU_SLCR_BANK0_CTRL3_OFFSET                                                0XFF180140
+#undef IOU_SLCR_BANK0_CTRL4_OFFSET 
+#define IOU_SLCR_BANK0_CTRL4_OFFSET                                                0XFF180144
+#undef IOU_SLCR_BANK0_CTRL5_OFFSET 
+#define IOU_SLCR_BANK0_CTRL5_OFFSET                                                0XFF180148
+#undef IOU_SLCR_BANK0_CTRL6_OFFSET 
+#define IOU_SLCR_BANK0_CTRL6_OFFSET                                                0XFF18014C
+#undef IOU_SLCR_BANK1_CTRL0_OFFSET 
+#define IOU_SLCR_BANK1_CTRL0_OFFSET                                                0XFF180154
+#undef IOU_SLCR_BANK1_CTRL1_OFFSET 
+#define IOU_SLCR_BANK1_CTRL1_OFFSET                                                0XFF180158
+#undef IOU_SLCR_BANK1_CTRL3_OFFSET 
+#define IOU_SLCR_BANK1_CTRL3_OFFSET                                                0XFF18015C
+#undef IOU_SLCR_BANK1_CTRL4_OFFSET 
+#define IOU_SLCR_BANK1_CTRL4_OFFSET                                                0XFF180160
+#undef IOU_SLCR_BANK1_CTRL5_OFFSET 
+#define IOU_SLCR_BANK1_CTRL5_OFFSET                                                0XFF180164
+#undef IOU_SLCR_BANK1_CTRL6_OFFSET 
+#define IOU_SLCR_BANK1_CTRL6_OFFSET                                                0XFF180168
+#undef IOU_SLCR_BANK2_CTRL0_OFFSET 
+#define IOU_SLCR_BANK2_CTRL0_OFFSET                                                0XFF180170
+#undef IOU_SLCR_BANK2_CTRL1_OFFSET 
+#define IOU_SLCR_BANK2_CTRL1_OFFSET                                                0XFF180174
+#undef IOU_SLCR_BANK2_CTRL3_OFFSET 
+#define IOU_SLCR_BANK2_CTRL3_OFFSET                                                0XFF180178
+#undef IOU_SLCR_BANK2_CTRL4_OFFSET 
+#define IOU_SLCR_BANK2_CTRL4_OFFSET                                                0XFF18017C
+#undef IOU_SLCR_BANK2_CTRL5_OFFSET 
+#define IOU_SLCR_BANK2_CTRL5_OFFSET                                                0XFF180180
+#undef IOU_SLCR_BANK2_CTRL6_OFFSET 
+#define IOU_SLCR_BANK2_CTRL6_OFFSET                                                0XFF180184
+#undef IOU_SLCR_MIO_LOOPBACK_OFFSET 
+#define IOU_SLCR_MIO_LOOPBACK_OFFSET                                               0XFF180200
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out- (QSPI Clock)*/
+#undef IOU_SLCR_MIO_PIN_0_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_0_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_0_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_0_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[0]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[0]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_0_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_0_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[0]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[0]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)*/
+#undef IOU_SLCR_MIO_PIN_0_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_0_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_0_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_0_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_mi1- (QSPI Databus) 1= qspi, Output, qspi_so_mo1- (QSPI Data
+		us)*/
+#undef IOU_SLCR_MIO_PIN_1_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_1_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_1_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_1_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[1]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[1]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_1_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_1_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[1]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[1]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)*/
+#undef IOU_SLCR_MIO_PIN_1_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_1_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_1_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_1_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi2- (QSPI Databus) 1= qspi, Output, qspi_mo2- (QSPI Databus)*/
+#undef IOU_SLCR_MIO_PIN_2_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_2_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_2_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_2_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[2]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[2]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_2_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_2_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[2]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[2]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc2, Input, ttc2_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_2_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_2_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_2_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_2_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi3- (QSPI Databus) 1= qspi, Output, qspi_mo3- (QSPI Databus)*/
+#undef IOU_SLCR_MIO_PIN_3_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_3_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_3_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_3_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[3]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[3]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_3_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_3_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[3]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[3]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_3_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_3_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_3_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_3_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_mo_mo0- (QSPI Databus) 1= qspi, Input, qspi_si_mi0- (QSPI Data
+		us)*/
+#undef IOU_SLCR_MIO_PIN_4_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_4_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_4_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_4_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[4]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[4]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_4_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_4_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[4]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[4]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_4_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_4_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_4_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_4_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out- (QSPI Slave Select)*/
+#undef IOU_SLCR_MIO_PIN_5_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_5_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_5_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_5_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[5]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[5]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_5_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_5_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[5]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[5]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_5_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_5_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_5_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_5_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_clk_for_lpbk- (QSPI Clock to be fed-back)*/
+#undef IOU_SLCR_MIO_PIN_6_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_6_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_6_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_6_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[6]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[6]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_6_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_6_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[6]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[6]- (GPIO bank 0) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1
+		sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace,
+		Output, tracedq[4]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_6_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_6_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_6_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_6_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out_upper- (QSPI Slave Select upper)*/
+#undef IOU_SLCR_MIO_PIN_7_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_7_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_7_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_7_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[7]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[7]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_7_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_7_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[7]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[7]- (GPIO bank 0) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= 
+		tc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, 
+		racedq[5]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_7_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_7_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_7_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_7_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[0]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[0]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_8_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_8_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_8_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_8_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[8]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[8]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_8_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_8_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[8]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[8]- (GPIO bank 0) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc
+		, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Tr
+		ce Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_8_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_8_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_8_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_8_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[1]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[1]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_9_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L0_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT                                            1
+#define IOU_SLCR_MIO_PIN_9_L0_SEL_MASK                                             0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)*/
+#undef IOU_SLCR_MIO_PIN_9_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L1_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT                                            2
+#define IOU_SLCR_MIO_PIN_9_L1_SEL_MASK                                             0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[9]- (Test Scan Port) = test_scan, Outp
+		t, test_scan_out[9]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_9_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L2_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT                                            3
+#define IOU_SLCR_MIO_PIN_9_L2_SEL_MASK                                             0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[9]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[9]- (GPIO bank 0) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, 
+		utput, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (U
+		RT receiver serial input) 7= trace, Output, tracedq[7]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_9_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_9_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_9_L3_SEL_DEFVAL                                           0x00000000
+#define IOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT                                            5
+#define IOU_SLCR_MIO_PIN_9_L3_SEL_MASK                                             0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[2]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[2]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_10_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_10_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_10_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_10_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[10]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[10]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_10_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_10_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[10]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[10]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_10_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_10_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_10_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_10_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[3]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
+		[3]- (QSPI Upper Databus)*/
+#undef IOU_SLCR_MIO_PIN_11_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_11_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_11_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_11_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[11]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[11]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_11_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_11_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[11]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[11]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_11_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_11_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_11_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_11_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out_upper- (QSPI Upper Clock)*/
+#undef IOU_SLCR_MIO_PIN_12_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_12_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		*/
+#undef IOU_SLCR_MIO_PIN_12_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_12_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[12]- (Test Scan Port) = test_scan, Out
+		ut, test_scan_out[12]- (Test Scan Port) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_12_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_12_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[12]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[12]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cl
+		ck) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trac
+		dq[10]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_12_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_12_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_12_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_12_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_13_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_13_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[0]- (NAND chip enable)*/
+#undef IOU_SLCR_MIO_PIN_13_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_13_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[13]- (Test Scan Port) = test_scan, Output, test_scan_out[13]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_13_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_13_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[13]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[13]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave
+		out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, tracedq[11]- (Trace Port Dat
+		bus)*/
+#undef IOU_SLCR_MIO_PIN_13_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_13_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_13_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_13_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_14_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_14_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_cle- (NAND Command Latch Enable)*/
+#undef IOU_SLCR_MIO_PIN_14_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_14_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[14]- (Test Scan Port) = test_scan, Output, test_scan_out[14]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_14_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_14_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[14]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[14]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_
+		n- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_14_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_14_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_14_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_14_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_15_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_15_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ale- (NAND Address Latch Enable)*/
+#undef IOU_SLCR_MIO_PIN_15_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_15_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[15]- (Test Scan Port) = test_scan, Output, test_scan_out[15]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_15_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_15_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[15]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[15]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out
+		0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter seri
+		l output) 7= trace, Output, tracedq[13]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_15_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_15_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_15_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_15_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_16_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_16_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[0]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[0]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_16_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_16_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[16]- (Test Scan Port) = test_scan, Output, test_scan_out[16]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_16_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_16_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[16]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[16]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_16_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_16_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_16_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_16_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_17_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_17_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[1]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[1]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_17_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_17_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[17]- (Test Scan Port) = test_scan, Output, test_scan_out[17]- (Test Scan Port
+		 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_17_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_17_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[17]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[17]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_17_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_17_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_17_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_17_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_18_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_18_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[2]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[2]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_18_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_18_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[18]- (Test Scan Port) = test_scan, Output, test_scan_out[18]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_18_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_18_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[18]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[18]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_18_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_18_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_18_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_18_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_19_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_19_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[3]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[3]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_19_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_19_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[19]- (Test Scan Port) = test_scan, Output, test_scan_out[19]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_19_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_19_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[19]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[19]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_19_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_19_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_19_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_19_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_20_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_20_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[4]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[4]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_20_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_20_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= test_scan, Input, test_scan_in[20]- (Test Scan Port) = test_scan, Output, test_scan_out[20]- (Test Scan Port
+		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_20_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_20_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[20]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[20]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= t
+		c1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_20_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_20_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_20_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_20_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_21_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_21_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[5]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[5]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_21_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_21_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= test_scan, Input, test_scan_in[21]- (Test Scan Port) = test_scan, Output, test_scan_out[21]- (Test Scan Port) 
+		= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_21_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_21_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[21]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[21]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- 
+		UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_21_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_21_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_21_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_21_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_22_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_22_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_we_b- (NAND Write Enable)*/
+#undef IOU_SLCR_MIO_PIN_22_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_22_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= test_scan, Input, test_scan_in[22]-
+		(Test Scan Port) = test_scan, Output, test_scan_out[22]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_22_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_22_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[22]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[22]- (GPIO bank 0) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed*/
+#undef IOU_SLCR_MIO_PIN_22_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_22_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_22_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_22_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_23_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_23_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[6]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[6]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_23_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_23_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= test_scan, Input, test_scan_in
+		23]- (Test Scan Port) = test_scan, Output, test_scan_out[23]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper
+		*/
+#undef IOU_SLCR_MIO_PIN_23_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_23_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[23]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[23]- (GPIO bank 0) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_23_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_23_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_23_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_23_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_24_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_24_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[7]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[7]- (NAND 
+		ata Bus)*/
+#undef IOU_SLCR_MIO_PIN_24_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_24_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= test_scan, Input, test
+		scan_in[24]- (Test Scan Port) = test_scan, Output, test_scan_out[24]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ex
+		 Tamper)*/
+#undef IOU_SLCR_MIO_PIN_24_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_24_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[24]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[24]- (GPIO bank 0) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= Not Used 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1,
+		Output, ua1_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_24_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_24_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_24_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_24_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_25_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_25_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_re_n- (NAND Read Enable)*/
+#undef IOU_SLCR_MIO_PIN_25_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_25_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= test_scan, Input,
+		test_scan_in[25]- (Test Scan Port) = test_scan, Output, test_scan_out[25]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (C
+		U Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_25_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_25_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[25]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[25]- (GPIO bank 0) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= Not Used 5= ttc3, Output, ttc3_wave_out- (TTC Waveform 
+		lock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_25_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_25_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_25_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_25_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_26_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_26_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)*/
+#undef IOU_SLCR_MIO_PIN_26_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_26_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_26_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_26_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_26_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_26_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_26_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_26_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_27_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_27_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_27_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_27_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_27_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_27_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)*/
+#undef IOU_SLCR_MIO_PIN_27_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_27_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_27_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_27_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_28_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_28_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)*/
+#undef IOU_SLCR_MIO_PIN_28_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_28_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_28_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_28_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_28_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_28_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_28_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_28_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_29_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_29_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_29_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_29_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
+		t, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_29_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_29_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_29_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_29_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_29_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_29_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_30_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_30_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_30_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_30_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_30_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_30_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_so
+		 (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output
+		 tracedq[8]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_30_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_30_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_30_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_30_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_31_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_31_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_31_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_31_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[31]- (Test Sc
+		n Port) = test_scan, Output, test_scan_out[31]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_31_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_31_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[5]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[5]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi
+		_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial out
+		ut) 7= trace, Output, tracedq[9]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_31_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_31_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_31_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_31_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_32_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_32_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
+		*/
+#undef IOU_SLCR_MIO_PIN_32_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_32_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[32]- (Test S
+		an Port) = test_scan, Output, test_scan_out[32]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_32_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_32_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[6]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[6]- (GPIO bank 1) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi
+		_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= 
+		race, Output, tracedq[10]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_32_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_32_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_32_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_32_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_33_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_33_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_33_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_33_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[33]- (Test S
+		an Port) = test_scan, Output, test_scan_out[33]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)*/
+#undef IOU_SLCR_MIO_PIN_33_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_33_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[7]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[7]- (GPIO bank 1) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= t
+		c3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, traced
+		[11]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_33_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_33_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_33_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_33_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_34_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_34_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_34_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_34_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[34]- (Test S
+		an Port) = test_scan, Output, test_scan_out[34]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_34_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_34_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[8]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[8]- (GPIO bank 1) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc2
+		 Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace P
+		rt Databus)*/
+#undef IOU_SLCR_MIO_PIN_34_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_34_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_34_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_34_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_35_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_35_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_35_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_35_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[35]- (Test S
+		an Port) = test_scan, Output, test_scan_out[35]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_35_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_35_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[9]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[9]- (GPIO bank 1) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1,
+		Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- 
+		UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_35_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_35_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_35_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_35_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_36_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_36_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_36_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_36_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[36]- (Test S
+		an Port) = test_scan, Output, test_scan_out[36]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
+		ut, dp_aux_data_out- (Dp Aux Data)*/
+#undef IOU_SLCR_MIO_PIN_36_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_36_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[10]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[10]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_36_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_36_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_36_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_36_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_37_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_37_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)*/
+#undef IOU_SLCR_MIO_PIN_37_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_37_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[37]- (Test S
+		an Port) = test_scan, Output, test_scan_out[37]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)*/
+#undef IOU_SLCR_MIO_PIN_37_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_37_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[11]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[11]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_37_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_37_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_37_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_37_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_38_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_38_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_38_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_38_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_38_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_38_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[12]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[12]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clo
+		k) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, trace_clk-
+		(Trace Port Clock)*/
+#undef IOU_SLCR_MIO_PIN_38_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_38_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_38_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_38_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_39_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_39_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_39_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_39_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= sd1, Input, sd1_data_i
+		[4]- (8-bit Data bus) = sd1, Output, sdio1_data_out[4]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_39_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_39_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[13]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[13]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc0, Output, ttc0_wav
+		_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, trace_ctl- (Trace Port
+		Control Signal)*/
+#undef IOU_SLCR_MIO_PIN_39_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_39_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_39_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_39_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_40_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_40_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_40_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_40_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= sd1, Input, sd1_data_in[5]- (8-bit Data bus) = sd1, Output, sdio1_data_out[5]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_40_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_40_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[14]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[14]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc3, Input, ttc3_clk
+		in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[0]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_40_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_40_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_40_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_40_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_41_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_41_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_41_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_41_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[6]- (8-bit Data bus) = sd1, Output, sdio1_data_out[6]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_41_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_41_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[15]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[15]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[
+		]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial in
+		ut) 7= trace, Output, tracedq[1]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_41_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_41_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_41_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_41_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_42_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_42_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_42_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_42_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[7]- (8-bit Data bus) = sd1, Output, sdio1_data_out[7]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_42_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_42_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[16]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[16]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_
+		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[2]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_42_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_42_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_42_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_42_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_43_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_43_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_43_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_43_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_43_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_43_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[17]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[17]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, s
+		i0_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[3]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_43_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_43_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_43_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_43_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_44_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_44_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_44_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_44_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_44_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_44_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[18]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[18]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, s
+		i1_sclk_out- (SPI Clock) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 Not Used*/
+#undef IOU_SLCR_MIO_PIN_44_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_44_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_44_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_44_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_45_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_45_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_45_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_45_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_45_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_45_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[19]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[19]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_45_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_45_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_45_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_45_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_46_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_46_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_46_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_46_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_46_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_46_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[20]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[20]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= tt
+		0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_46_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_46_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_46_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_46_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_47_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_47_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_47_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_47_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_47_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_47_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[21]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[21]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_47_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_47_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_47_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_47_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_48_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_48_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_48_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_48_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_48_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_48_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[22]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[22]- (GPIO bank 1) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
+		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not U
+		ed*/
+#undef IOU_SLCR_MIO_PIN_48_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_48_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_48_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_48_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_49_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_49_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_49_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_49_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_data_in[3]- (8
+		bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_49_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_49_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[23]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[23]- (GPIO bank 1) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
+		1_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_49_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_49_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_49_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_49_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)*/
+#undef IOU_SLCR_MIO_PIN_50_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_50_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_50_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_50_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Input, sd1_c
+		d_in- (Command Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_50_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_50_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[24]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[24]- (GPIO bank 1) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= ttc2, Input, ttc2
+		clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_50_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_50_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_50_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_50_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)*/
+#undef IOU_SLCR_MIO_PIN_51_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_51_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_51_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_51_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Output, sdio1_clk_out- (SDSDIO clock) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_51_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_51_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[25]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[25]- (GPIO bank 1) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= mdio1, Input, gem1_mdio_in- (MDIO Data) 4= mdio1, Outp
+		t, gem1_mdio_out- (MDIO Data) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter
+		serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_51_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_51_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_51_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_51_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_52_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_52_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_clk_in- (ULPI Clock)*/
+#undef IOU_SLCR_MIO_PIN_52_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_52_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_52_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_52_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[0]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[0]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
+		) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
+		lk- (Trace Port Clock)*/
+#undef IOU_SLCR_MIO_PIN_52_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_52_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_52_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_52_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_53_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_53_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_dir- (Data bus direction control)*/
+#undef IOU_SLCR_MIO_PIN_53_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_53_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_53_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_53_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[1]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[1]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_o
+		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
+		Signal)*/
+#undef IOU_SLCR_MIO_PIN_53_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_53_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_53_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_53_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_54_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_54_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[2]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[2]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_54_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_54_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_54_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_54_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[2]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[2]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_in
+		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_54_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_54_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_54_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_54_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_55_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_55_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_nxt- (Data flow control signal from the PHY)*/
+#undef IOU_SLCR_MIO_PIN_55_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_55_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_55_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_55_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[3]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[3]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
+		- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
+		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_55_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_55_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_55_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_55_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_56_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_56_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[0]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[0]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_56_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_56_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_56_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_56_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[4]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[4]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
+		- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
+		utput, tracedq[2]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_56_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_56_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_56_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_56_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_57_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_57_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[1]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[1]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_57_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_57_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_57_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_57_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[5]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[5]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
+		si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
+		 trace, Output, tracedq[3]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_57_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_57_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_57_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_57_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_58_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_58_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Output, usb0_ulpi_stp- (Asserted to end or interrupt transfers)*/
+#undef IOU_SLCR_MIO_PIN_58_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_58_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_58_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_58_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[6]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[6]- (GPIO bank 2) 1= can
+		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
+		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1_sclk_out- (SPI Clock
+		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
+		Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_58_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_58_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_58_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_58_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_59_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_59_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[3]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[3]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_59_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_59_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_59_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_59_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[7]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[7]- (GPIO bank 2) 1= can
+		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
+		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
+		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
+		atabus)*/
+#undef IOU_SLCR_MIO_PIN_59_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_59_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_59_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_59_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_60_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_60_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[4]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[4]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_60_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_60_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_60_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_60_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[8]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[8]- (GPIO bank 2) 1= can
+		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
+		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
+		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_60_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_60_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_60_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_60_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_61_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_61_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[5]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[5]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_61_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_61_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_61_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_61_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[9]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[9]- (GPIO bank 2) 1= can
+		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
+		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, Output, spi1_n_ss_out[0]
+		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
+		) 7= trace, Output, tracedq[7]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_61_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_61_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_61_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_61_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_62_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_62_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[6]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[6]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_62_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_62_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_62_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_62_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[10]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[10]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
+		t, tracedq[8]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_62_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_62_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_62_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_62_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_63_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_63_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[7]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
+		ata[7]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_63_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_63_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_63_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_63_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[11]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[11]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
+		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_63_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_63_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_63_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_63_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_clk- (TX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_64_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_64_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_clk_in- (ULPI Clock)*/
+#undef IOU_SLCR_MIO_PIN_64_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_64_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_64_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_64_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[12]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[12]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, s
+		i0_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
+		 trace, Output, tracedq[10]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_64_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_64_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_64_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_64_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[0]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_65_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_65_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_dir- (Data bus direction control)*/
+#undef IOU_SLCR_MIO_PIN_65_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_65_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_65_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_65_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[13]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[13]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5=
+		ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trac
+		dq[11]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_65_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_65_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_65_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_65_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[1]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_66_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_66_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[2]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[2]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_66_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_66_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
+		 Indicator) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_66_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_66_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[14]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[14]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= tt
+		2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace
+		Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_66_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_66_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_66_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_66_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[2]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_67_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_67_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_nxt- (Data flow control signal from the PHY)*/
+#undef IOU_SLCR_MIO_PIN_67_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_67_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
+		bit Data bus) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_67_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_67_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[15]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[15]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi
+		, Output, spi0_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
+		 (UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_67_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_67_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_67_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_67_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[3]- (TX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_68_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_68_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[0]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[0]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_68_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_68_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
+		bit Data bus) 2= Not Used 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_68_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_68_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[16]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[16]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
+		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
+		 Output, tracedq[14]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_68_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_68_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_68_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_68_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_ctl- (TX RGMII control)*/
+#undef IOU_SLCR_MIO_PIN_69_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_69_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[1]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[1]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_69_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_69_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
+		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_69_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_69_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[17]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[17]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
+		0_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
+		7= trace, Output, tracedq[15]- (Trace Port Databus)*/
+#undef IOU_SLCR_MIO_PIN_69_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_69_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_69_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_69_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_clk- (RX RGMII clock)*/
+#undef IOU_SLCR_MIO_PIN_70_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_70_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Output, usb1_ulpi_stp- (Asserted to end or interrupt transfers)*/
+#undef IOU_SLCR_MIO_PIN_70_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_70_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
+		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_70_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_70_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[18]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[18]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
+		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
+		sed*/
+#undef IOU_SLCR_MIO_PIN_70_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_70_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_70_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_70_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[0]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_71_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_71_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[3]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[3]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_71_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_71_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_71_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_71_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[19]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[19]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
+		 ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_71_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_71_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_71_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_71_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[1]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_72_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_72_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[4]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[4]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_72_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_72_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_72_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_72_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[20]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[20]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= N
+		t Used 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_72_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_72_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_72_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_72_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[2]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_73_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_73_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[5]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[5]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_73_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_73_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_73_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_73_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[21]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[21]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
+		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= Not Used 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_73_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_73_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_73_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_73_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[3]- (RX RGMII data)*/
+#undef IOU_SLCR_MIO_PIN_74_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_74_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[6]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[6]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_74_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_74_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
+		bit Data bus) 2= sd1, Input, sd1_data_in[3]- (8-bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_74_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_74_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[22]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[22]- (GPIO bank 2) 1= c
+		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
+		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
+		o- (MISO signal) 5= Not Used 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_74_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_74_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_74_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_74_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_ctl- (RX RGMII control )*/
+#undef IOU_SLCR_MIO_PIN_75_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_75_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[7]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
+		ata[7]- (ULPI data bus)*/
+#undef IOU_SLCR_MIO_PIN_75_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_75_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_cmd_in- (Comma
+		d Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_75_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_75_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[23]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[23]- (GPIO bank 2) 1= c
+		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
+		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
+		i1_si- (MOSI signal) 5= Not Used 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_75_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_75_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_75_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_75_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_76_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_76_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Output, sdio
+		_clk_out- (SDSDIO clock) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_76_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[24]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[24]- (GPIO bank 2) 1= c
+		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
+		al) 3= mdio0, Output, gem0_mdc- (MDIO Clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= mdio2, Output, gem2_mdc- (MDIO Clock
+		 6= mdio3, Output, gem3_mdc- (MDIO Clock) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_76_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_76_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_76_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_76_L3_SEL_MASK                                            0x000000E0U
+
+/*Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L0_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L0_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L0_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT                                           1
+#define IOU_SLCR_MIO_PIN_77_L0_SEL_MASK                                            0x00000002U
+
+/*Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L1_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L1_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L1_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT                                           2
+#define IOU_SLCR_MIO_PIN_77_L1_SEL_MASK                                            0x00000004U
+
+/*Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L2_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L2_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L2_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT                                           3
+#define IOU_SLCR_MIO_PIN_77_L2_SEL_MASK                                            0x00000018U
+
+/*Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[25]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[25]- (GPIO bank 2) 1= c
+		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
+		l) 3= mdio0, Input, gem0_mdio_in- (MDIO Data) 3= mdio0, Output, gem0_mdio_out- (MDIO Data) 4= mdio1, Input, gem1_mdio_in- (MD
+		O Data) 4= mdio1, Output, gem1_mdio_out- (MDIO Data) 5= mdio2, Input, gem2_mdio_in- (MDIO Data) 5= mdio2, Output, gem2_mdio_o
+		t- (MDIO Data) 6= mdio3, Input, gem3_mdio_in- (MDIO Data) 6= mdio3, Output, gem3_mdio_out- (MDIO Data) 7= Not Used*/
+#undef IOU_SLCR_MIO_PIN_77_L3_SEL_DEFVAL 
+#undef IOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT 
+#undef IOU_SLCR_MIO_PIN_77_L3_SEL_MASK 
+#define IOU_SLCR_MIO_PIN_77_L3_SEL_DEFVAL                                          0x00000000
+#define IOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT                                           5
+#define IOU_SLCR_MIO_PIN_77_L3_SEL_MASK                                            0x000000E0U
+
+/*Master Tri-state Enable for pin 0, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT                                     0
+#define IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK                                      0x00000001U
+
+/*Master Tri-state Enable for pin 1, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT                                     1
+#define IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK                                      0x00000002U
+
+/*Master Tri-state Enable for pin 2, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT                                     2
+#define IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK                                      0x00000004U
+
+/*Master Tri-state Enable for pin 3, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT                                     3
+#define IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK                                      0x00000008U
+
+/*Master Tri-state Enable for pin 4, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT                                     4
+#define IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK                                      0x00000010U
+
+/*Master Tri-state Enable for pin 5, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT                                     5
+#define IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK                                      0x00000020U
+
+/*Master Tri-state Enable for pin 6, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT                                     6
+#define IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK                                      0x00000040U
+
+/*Master Tri-state Enable for pin 7, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT                                     7
+#define IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK                                      0x00000080U
+
+/*Master Tri-state Enable for pin 8, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT                                     8
+#define IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK                                      0x00000100U
+
+/*Master Tri-state Enable for pin 9, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT                                     9
+#define IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK                                      0x00000200U
+
+/*Master Tri-state Enable for pin 10, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT                                     10
+#define IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK                                      0x00000400U
+
+/*Master Tri-state Enable for pin 11, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT                                     11
+#define IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK                                      0x00000800U
+
+/*Master Tri-state Enable for pin 12, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT                                     12
+#define IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK                                      0x00001000U
+
+/*Master Tri-state Enable for pin 13, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT                                     13
+#define IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK                                      0x00002000U
+
+/*Master Tri-state Enable for pin 14, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT                                     14
+#define IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK                                      0x00004000U
+
+/*Master Tri-state Enable for pin 15, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT                                     15
+#define IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK                                      0x00008000U
+
+/*Master Tri-state Enable for pin 16, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT                                     16
+#define IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK                                      0x00010000U
+
+/*Master Tri-state Enable for pin 17, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT                                     17
+#define IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK                                      0x00020000U
+
+/*Master Tri-state Enable for pin 18, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT                                     18
+#define IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK                                      0x00040000U
+
+/*Master Tri-state Enable for pin 19, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT                                     19
+#define IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK                                      0x00080000U
+
+/*Master Tri-state Enable for pin 20, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT                                     20
+#define IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK                                      0x00100000U
+
+/*Master Tri-state Enable for pin 21, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT                                     21
+#define IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK                                      0x00200000U
+
+/*Master Tri-state Enable for pin 22, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT                                     22
+#define IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK                                      0x00400000U
+
+/*Master Tri-state Enable for pin 23, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT                                     23
+#define IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK                                      0x00800000U
+
+/*Master Tri-state Enable for pin 24, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT                                     24
+#define IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK                                      0x01000000U
+
+/*Master Tri-state Enable for pin 25, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT                                     25
+#define IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK                                      0x02000000U
+
+/*Master Tri-state Enable for pin 26, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT                                     26
+#define IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK                                      0x04000000U
+
+/*Master Tri-state Enable for pin 27, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT                                     27
+#define IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK                                      0x08000000U
+
+/*Master Tri-state Enable for pin 28, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT                                     28
+#define IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK                                      0x10000000U
+
+/*Master Tri-state Enable for pin 29, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT                                     29
+#define IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK                                      0x20000000U
+
+/*Master Tri-state Enable for pin 30, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT                                     30
+#define IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK                                      0x40000000U
+
+/*Master Tri-state Enable for pin 31, active high*/
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT                                     31
+#define IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK                                      0x80000000U
+
+/*Master Tri-state Enable for pin 32, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT                                     0
+#define IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK                                      0x00000001U
+
+/*Master Tri-state Enable for pin 33, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT                                     1
+#define IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK                                      0x00000002U
+
+/*Master Tri-state Enable for pin 34, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT                                     2
+#define IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK                                      0x00000004U
+
+/*Master Tri-state Enable for pin 35, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT                                     3
+#define IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK                                      0x00000008U
+
+/*Master Tri-state Enable for pin 36, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT                                     4
+#define IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK                                      0x00000010U
+
+/*Master Tri-state Enable for pin 37, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT                                     5
+#define IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK                                      0x00000020U
+
+/*Master Tri-state Enable for pin 38, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT                                     6
+#define IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK                                      0x00000040U
+
+/*Master Tri-state Enable for pin 39, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT                                     7
+#define IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK                                      0x00000080U
+
+/*Master Tri-state Enable for pin 40, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT                                     8
+#define IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK                                      0x00000100U
+
+/*Master Tri-state Enable for pin 41, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT                                     9
+#define IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK                                      0x00000200U
+
+/*Master Tri-state Enable for pin 42, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT                                     10
+#define IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK                                      0x00000400U
+
+/*Master Tri-state Enable for pin 43, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT                                     11
+#define IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK                                      0x00000800U
+
+/*Master Tri-state Enable for pin 44, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT                                     12
+#define IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK                                      0x00001000U
+
+/*Master Tri-state Enable for pin 45, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT                                     13
+#define IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK                                      0x00002000U
+
+/*Master Tri-state Enable for pin 46, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT                                     14
+#define IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK                                      0x00004000U
+
+/*Master Tri-state Enable for pin 47, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT                                     15
+#define IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK                                      0x00008000U
+
+/*Master Tri-state Enable for pin 48, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT                                     16
+#define IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK                                      0x00010000U
+
+/*Master Tri-state Enable for pin 49, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT                                     17
+#define IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK                                      0x00020000U
+
+/*Master Tri-state Enable for pin 50, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT                                     18
+#define IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK                                      0x00040000U
+
+/*Master Tri-state Enable for pin 51, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT                                     19
+#define IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK                                      0x00080000U
+
+/*Master Tri-state Enable for pin 52, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT                                     20
+#define IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK                                      0x00100000U
+
+/*Master Tri-state Enable for pin 53, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT                                     21
+#define IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK                                      0x00200000U
+
+/*Master Tri-state Enable for pin 54, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT                                     22
+#define IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK                                      0x00400000U
+
+/*Master Tri-state Enable for pin 55, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT                                     23
+#define IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK                                      0x00800000U
+
+/*Master Tri-state Enable for pin 56, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT                                     24
+#define IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK                                      0x01000000U
+
+/*Master Tri-state Enable for pin 57, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT                                     25
+#define IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK                                      0x02000000U
+
+/*Master Tri-state Enable for pin 58, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT                                     26
+#define IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK                                      0x04000000U
+
+/*Master Tri-state Enable for pin 59, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT                                     27
+#define IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK                                      0x08000000U
+
+/*Master Tri-state Enable for pin 60, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT                                     28
+#define IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK                                      0x10000000U
+
+/*Master Tri-state Enable for pin 61, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT                                     29
+#define IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK                                      0x20000000U
+
+/*Master Tri-state Enable for pin 62, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT                                     30
+#define IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK                                      0x40000000U
+
+/*Master Tri-state Enable for pin 63, active high*/
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_DEFVAL                                    0xFFFFFFFF
+#define IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT                                     31
+#define IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK                                      0x80000000U
+
+/*Master Tri-state Enable for pin 64, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT                                     0
+#define IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK                                      0x00000001U
+
+/*Master Tri-state Enable for pin 65, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT                                     1
+#define IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK                                      0x00000002U
+
+/*Master Tri-state Enable for pin 66, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT                                     2
+#define IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK                                      0x00000004U
+
+/*Master Tri-state Enable for pin 67, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT                                     3
+#define IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK                                      0x00000008U
+
+/*Master Tri-state Enable for pin 68, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT                                     4
+#define IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK                                      0x00000010U
+
+/*Master Tri-state Enable for pin 69, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT                                     5
+#define IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK                                      0x00000020U
+
+/*Master Tri-state Enable for pin 70, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT                                     6
+#define IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK                                      0x00000040U
+
+/*Master Tri-state Enable for pin 71, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT                                     7
+#define IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK                                      0x00000080U
+
+/*Master Tri-state Enable for pin 72, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT                                     8
+#define IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK                                      0x00000100U
+
+/*Master Tri-state Enable for pin 73, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT                                     9
+#define IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK                                      0x00000200U
+
+/*Master Tri-state Enable for pin 74, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT                                     10
+#define IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK                                      0x00000400U
+
+/*Master Tri-state Enable for pin 75, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT                                     11
+#define IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK                                      0x00000800U
+
+/*Master Tri-state Enable for pin 76, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT                                     12
+#define IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK                                      0x00001000U
+
+/*Master Tri-state Enable for pin 77, active high*/
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_DEFVAL 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT 
+#undef IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK 
+#define IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_DEFVAL                                    0x00003FFF
+#define IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT                                     13
+#define IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK                                      0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT                            0
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK                             0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT                            1
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK                             0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT                            2
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK                             0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT                            3
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK                             0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT                            4
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK                             0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT                            5
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK                             0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT                            6
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK                             0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT                            7
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK                             0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT                            8
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK                             0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL                           
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT                            9
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK                             0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT                           10
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK                            0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT                           11
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK                            0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT                           12
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK                            0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT                           13
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK                            0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT                           14
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK                            0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT                           15
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK                            0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT                           16
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK                            0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT                           17
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK                            0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT                           18
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK                            0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT                           19
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK                            0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT                           20
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK                            0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT                           21
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK                            0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT                           22
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK                            0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT                           23
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK                            0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT                           24
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK                            0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT                           25
+#define IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK                            0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT                           0
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK                            0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT                           1
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK                            0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT                           2
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK                            0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT                           3
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK                            0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT                           4
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK                            0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT                           5
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK                            0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT                           6
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK                            0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT                           7
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK                            0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT                           8
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK                            0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL                          
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT                           9
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK                            0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT                          10
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK                           0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT                          11
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK                           0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT                          12
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK                           0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT                          13
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK                           0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT                          14
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK                           0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT                          15
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK                           0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT                          16
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK                           0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT                          17
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK                           0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT                          18
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK                           0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT                          19
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK                           0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT                          20
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK                           0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT                          21
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK                           0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT                          22
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK                           0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT                          23
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK                           0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT                          24
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK                           0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT                          25
+#define IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK                           0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_SHIFT                               0
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_MASK                                0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_SHIFT                               1
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_MASK                                0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_SHIFT                               2
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_MASK                                0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_SHIFT                               3
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_MASK                                0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_SHIFT                               4
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_MASK                                0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_SHIFT                               5
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_MASK                                0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_SHIFT                               6
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_MASK                                0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_SHIFT                               7
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_MASK                                0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_SHIFT                               8
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_MASK                                0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_DEFVAL                              
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_SHIFT                               9
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_MASK                                0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_SHIFT                              10
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_MASK                               0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_SHIFT                              11
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_MASK                               0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_SHIFT                              12
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_MASK                               0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_SHIFT                              13
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_MASK                               0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_SHIFT                              14
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_MASK                               0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_SHIFT                              15
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_MASK                               0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_SHIFT                              16
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_MASK                               0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_SHIFT                              17
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_MASK                               0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_SHIFT                              18
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_MASK                               0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_SHIFT                              19
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_MASK                               0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_SHIFT                              20
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_MASK                               0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_SHIFT                              21
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_MASK                               0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_SHIFT                              22
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_MASK                               0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_SHIFT                              23
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_MASK                               0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_SHIFT                              24
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_MASK                               0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_DEFVAL                             
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_SHIFT                              25
+#define IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_MASK                               0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT                          0
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK                           0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT                          1
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK                           0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT                          2
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK                           0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT                          3
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK                           0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT                          4
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK                           0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT                          5
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK                           0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT                          6
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK                           0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT                          7
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK                           0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT                          8
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK                           0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL                         
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT                          9
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK                           0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT                         10
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK                          0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT                         11
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK                          0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT                         12
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK                          0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT                         13
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK                          0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT                         14
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK                          0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT                         15
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK                          0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT                         16
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK                          0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT                         17
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK                          0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT                         18
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK                          0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT                         19
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK                          0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT                         20
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK                          0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT                         21
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK                          0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT                         22
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK                          0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT                         23
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK                          0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT                         24
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK                          0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[0].*/
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL                        
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT                         25
+#define IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK                          0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT                            0
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK                             0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT                            1
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK                             0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT                            2
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK                             0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT                            3
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK                             0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT                            4
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK                             0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT                            5
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK                             0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT                            6
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK                             0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT                            7
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK                             0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT                            8
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK                             0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL                           
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT                            9
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK                             0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT                           10
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK                            0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT                           11
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK                            0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT                           12
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK                            0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT                           13
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK                            0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT                           14
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK                            0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT                           15
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK                            0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT                           16
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK                            0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT                           17
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK                            0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT                           18
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK                            0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT                           19
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK                            0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT                           20
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK                            0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT                           21
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK                            0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT                           22
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK                            0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT                           23
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK                            0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT                           24
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK                            0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT                           25
+#define IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK                            0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT                           0
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK                            0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT                           1
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK                            0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT                           2
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK                            0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT                           3
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK                            0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT                           4
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK                            0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT                           5
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK                            0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT                           6
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK                            0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT                           7
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK                            0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT                           8
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK                            0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL                          
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT                           9
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK                            0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT                          10
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK                           0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT                          11
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK                           0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT                          12
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK                           0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT                          13
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK                           0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT                          14
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK                           0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT                          15
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK                           0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT                          16
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK                           0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT                          17
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK                           0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT                          18
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK                           0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT                          19
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK                           0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT                          20
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK                           0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT                          21
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK                           0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT                          22
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK                           0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT                          23
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK                           0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT                          24
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK                           0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT                          25
+#define IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK                           0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT                               0
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK                                0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT                               1
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK                                0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT                               2
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK                                0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT                               3
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK                                0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT                               4
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK                                0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT                               5
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK                                0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT                               6
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK                                0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT                               7
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK                                0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT                               8
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK                                0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL                              
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT                               9
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK                                0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT                              10
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK                               0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT                              11
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK                               0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT                              12
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK                               0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT                              13
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK                               0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT                              14
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK                               0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT                              15
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK                               0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT                              16
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK                               0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT                              17
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK                               0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT                              18
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK                               0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT                              19
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK                               0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT                              20
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK                               0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT                              21
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK                               0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT                              22
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK                               0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT                              23
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK                               0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT                              24
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK                               0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL                             
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT                              25
+#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK                               0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT                          0
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK                           0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT                          1
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK                           0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT                          2
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK                           0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT                          3
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK                           0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT                          4
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK                           0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT                          5
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK                           0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT                          6
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK                           0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT                          7
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK                           0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT                          8
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK                           0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL                         
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT                          9
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK                           0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT                         10
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK                          0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT                         11
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK                          0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT                         12
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK                          0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT                         13
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK                          0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT                         14
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK                          0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT                         15
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK                          0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT                         16
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK                          0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT                         17
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK                          0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT                         18
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK                          0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT                         19
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK                          0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT                         20
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK                          0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT                         21
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK                          0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT                         22
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK                          0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT                         23
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK                          0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT                         24
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK                          0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[26].*/
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL                        
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT                         25
+#define IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK                          0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_SHIFT                                    0
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_MASK                                     0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_SHIFT                                    1
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_MASK                                     0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_SHIFT                                    2
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_MASK                                     0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_SHIFT                                    3
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_MASK                                     0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_SHIFT                                    4
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_MASK                                     0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_SHIFT                                    5
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_MASK                                     0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_SHIFT                                    6
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_MASK                                     0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_SHIFT                                    7
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_MASK                                     0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_SHIFT                                    8
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_MASK                                     0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_DEFVAL                                   
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_SHIFT                                    9
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_MASK                                     0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_SHIFT                                   10
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_MASK                                    0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_SHIFT                                   11
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_MASK                                    0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_SHIFT                                   12
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_MASK                                    0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_SHIFT                                   13
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_MASK                                    0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_SHIFT                                   14
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_MASK                                    0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_SHIFT                                   15
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_MASK                                    0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_SHIFT                                   16
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_MASK                                    0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_SHIFT                                   17
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_MASK                                    0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_SHIFT                                   18
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_MASK                                    0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_SHIFT                                   19
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_MASK                                    0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_SHIFT                                   20
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_MASK                                    0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_SHIFT                                   21
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_MASK                                    0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_SHIFT                                   22
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_MASK                                    0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_SHIFT                                   23
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_MASK                                    0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_SHIFT                                   24
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_MASK                                    0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_DEFVAL                                  
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_SHIFT                                   25
+#define IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_MASK                                    0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT                            0
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK                             0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT                            1
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK                             0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT                            2
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK                             0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT                            3
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK                             0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT                            4
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK                             0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT                            5
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK                             0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT                            6
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK                             0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT                            7
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK                             0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT                            8
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK                             0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_DEFVAL                           
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT                            9
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK                             0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT                           10
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK                            0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT                           11
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK                            0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT                           12
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK                            0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT                           13
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK                            0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT                           14
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK                            0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT                           15
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK                            0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT                           16
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK                            0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT                           17
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK                            0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT                           18
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK                            0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT                           19
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK                            0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT                           20
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK                            0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT                           21
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK                            0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT                           22
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK                            0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT                           23
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK                            0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT                           24
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK                            0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT                           25
+#define IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK                            0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT                           0
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK                            0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT                           1
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK                            0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT                           2
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK                            0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT                           3
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK                            0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT                           4
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK                            0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT                           5
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK                            0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT                           6
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK                            0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT                           7
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK                            0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT                           8
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK                            0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_DEFVAL                          
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT                           9
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK                            0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT                          10
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK                           0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT                          11
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK                           0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT                          12
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK                           0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT                          13
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK                           0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT                          14
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK                           0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT                          15
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK                           0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT                          16
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK                           0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT                          17
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK                           0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT                          18
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK                           0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT                          19
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK                           0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT                          20
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK                           0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT                          21
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK                           0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT                          22
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK                           0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT                          23
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK                           0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT                          24
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK                           0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT                          25
+#define IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK                           0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_SHIFT                               0
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_MASK                                0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_SHIFT                               1
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_MASK                                0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_SHIFT                               2
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_MASK                                0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_SHIFT                               3
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_MASK                                0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_SHIFT                               4
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_MASK                                0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_SHIFT                               5
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_MASK                                0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_SHIFT                               6
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_MASK                                0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_SHIFT                               7
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_MASK                                0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_SHIFT                               8
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_MASK                                0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_DEFVAL                              
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_SHIFT                               9
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_MASK                                0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_SHIFT                              10
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_MASK                               0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_SHIFT                              11
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_MASK                               0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_SHIFT                              12
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_MASK                               0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_SHIFT                              13
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_MASK                               0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_SHIFT                              14
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_MASK                               0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_SHIFT                              15
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_MASK                               0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_SHIFT                              16
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_MASK                               0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_SHIFT                              17
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_MASK                               0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_SHIFT                              18
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_MASK                               0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_SHIFT                              19
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_MASK                               0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_SHIFT                              20
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_MASK                               0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_SHIFT                              21
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_MASK                               0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_SHIFT                              22
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_MASK                               0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_SHIFT                              23
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_MASK                               0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_SHIFT                              24
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_MASK                               0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_DEFVAL                             
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_SHIFT                              25
+#define IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_MASK                               0x02000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT                          0
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK                           0x00000001U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT                          1
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK                           0x00000002U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT                          2
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK                           0x00000004U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT                          3
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK                           0x00000008U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT                          4
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK                           0x00000010U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT                          5
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK                           0x00000020U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT                          6
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK                           0x00000040U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT                          7
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK                           0x00000080U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT                          8
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK                           0x00000100U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_DEFVAL                         
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT                          9
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK                           0x00000200U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT                         10
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK                          0x00000400U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT                         11
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK                          0x00000800U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT                         12
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK                          0x00001000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT                         13
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK                          0x00002000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT                         14
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK                          0x00004000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT                         15
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK                          0x00008000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT                         16
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK                          0x00010000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT                         17
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK                          0x00020000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT                         18
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK                          0x00040000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT                         19
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK                          0x00080000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT                         20
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK                          0x00100000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT                         21
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK                          0x00200000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT                         22
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK                          0x00400000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT                         23
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK                          0x00800000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT                         24
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK                          0x01000000U
+
+/*Each bit applies to a single IO. Bit 0 for MIO[52].*/
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT 
+#undef IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK 
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_DEFVAL                        
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT                         25
+#define IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK                          0x02000000U
+
+/*I2C Loopback Control. 0 = Connect I2C inputs according to MIO mapping. 1 = Loop I2C 0 outputs to I2C 1 inputs, and I2C 1 outp
+		ts to I2C 0 inputs.*/
+#undef IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_DEFVAL                                0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_SHIFT                                 3
+#define IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_MASK                                  0x00000008U
+
+/*CAN Loopback Control. 0 = Connect CAN inputs according to MIO mapping. 1 = Loop CAN 0 Tx to CAN 1 Rx, and CAN 1 Tx to CAN 0 R
+		.*/
+#undef IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_DEFVAL                                0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_SHIFT                                 2
+#define IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_MASK                                  0x00000004U
+
+/*UART Loopback Control. 0 = Connect UART inputs according to MIO mapping. 1 = Loop UART 0 outputs to UART 1 inputs, and UART 1
+		outputs to UART 0 inputs. RXD/TXD cross-connected. RTS/CTS cross-connected. DSR, DTR, DCD and RI not used.*/
+#undef IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_DEFVAL                                  0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_SHIFT                                   1
+#define IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_MASK                                    0x00000002U
+
+/*SPI Loopback Control. 0 = Connect SPI inputs according to MIO mapping. 1 = Loop SPI 0 outputs to SPI 1 inputs, and SPI 1 outp
+		ts to SPI 0 inputs. The other SPI core will appear on the LS Slave Select.*/
+#undef IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_DEFVAL 
+#undef IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT 
+#undef IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK 
+#define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_DEFVAL                                0x00000000
+#define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT                                 0
+#define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK                                  0x00000001U
+#undef CRL_APB_RST_LPD_IOU0_OFFSET 
+#define CRL_APB_RST_LPD_IOU0_OFFSET                                                0XFF5E0230
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef IOU_SLCR_CTRL_REG_SD_OFFSET 
+#define IOU_SLCR_CTRL_REG_SD_OFFSET                                                0XFF180310
+#undef IOU_SLCR_SD_CONFIG_REG2_OFFSET 
+#define IOU_SLCR_SD_CONFIG_REG2_OFFSET                                             0XFF180320
+#undef IOU_SLCR_SD_CONFIG_REG1_OFFSET 
+#define IOU_SLCR_SD_CONFIG_REG1_OFFSET                                             0XFF18031C
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef CRL_APB_RST_LPD_IOU2_OFFSET 
+#define CRL_APB_RST_LPD_IOU2_OFFSET                                                0XFF5E0238
+#undef UART0_BAUD_RATE_DIVIDER_REG0_OFFSET 
+#define UART0_BAUD_RATE_DIVIDER_REG0_OFFSET                                        0XFF000034
+#undef UART0_BAUD_RATE_GEN_REG0_OFFSET 
+#define UART0_BAUD_RATE_GEN_REG0_OFFSET                                            0XFF000018
+#undef UART0_CONTROL_REG0_OFFSET 
+#define UART0_CONTROL_REG0_OFFSET                                                  0XFF000000
+#undef UART0_MODE_REG0_OFFSET 
+#define UART0_MODE_REG0_OFFSET                                                     0XFF000004
+#undef UART1_BAUD_RATE_DIVIDER_REG0_OFFSET 
+#define UART1_BAUD_RATE_DIVIDER_REG0_OFFSET                                        0XFF010034
+#undef UART1_BAUD_RATE_GEN_REG0_OFFSET 
+#define UART1_BAUD_RATE_GEN_REG0_OFFSET                                            0XFF010018
+#undef UART1_CONTROL_REG0_OFFSET 
+#define UART1_CONTROL_REG0_OFFSET                                                  0XFF010000
+#undef UART1_MODE_REG0_OFFSET 
+#define UART1_MODE_REG0_OFFSET                                                     0XFF010004
+#undef LPD_SLCR_SECURE_SLCR_ADMA_OFFSET 
+#define LPD_SLCR_SECURE_SLCR_ADMA_OFFSET                                           0XFF4B0024
+#undef CSU_TAMPER_STATUS_OFFSET 
+#define CSU_TAMPER_STATUS_OFFSET                                                   0XFFCA5000
+#undef APU_ACE_CTRL_OFFSET 
+#define APU_ACE_CTRL_OFFSET                                                        0XFD5C0060
+#undef RTC_CONTROL_OFFSET 
+#define RTC_CONTROL_OFFSET                                                         0XFFA60040
+
+/*GEM 3 reset*/
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL                                     0x0000000F
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT                                      3
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK                                       0x00000008U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_QSPI_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_QSPI_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT                                      0
+#define CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK                                       0x00000001U
+
+/*USB 0 reset for control registers*/
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT                                   10
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK                                    0x00000400U
+
+/*USB 0 sleep circuit reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL                                 0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT                                  8
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK                                   0x00000100U
+
+/*USB 0 reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT                                   6
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK                                    0x00000040U
+
+/*PCIE config reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL                                  0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT                                   19
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK                                    0x00080000U
+
+/*PCIE control block level reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL                                 0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT                                  17
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK                                   0x00020000U
+
+/*PCIE bridge block level reset (AXI interface)*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL                               0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT                                18
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK                                 0x00040000U
+
+/*Display Port block level reset (includes DPDMA)*/
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT                                         16
+#define CRF_APB_RST_FPD_TOP_DP_RESET_MASK                                          0x00010000U
+
+/*FPD WDT reset*/
+#undef CRF_APB_RST_FPD_TOP_SWDT_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SWDT_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SWDT_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SWDT_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SWDT_RESET_SHIFT                                       15
+#define CRF_APB_RST_FPD_TOP_SWDT_RESET_MASK                                        0x00008000U
+
+/*GDMA block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GDMA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GDMA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GDMA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GDMA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GDMA_RESET_SHIFT                                       6
+#define CRF_APB_RST_FPD_TOP_GDMA_RESET_MASK                                        0x00000040U
+
+/*Pixel Processor (submodule of GPU) block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_DEFVAL                                   0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_SHIFT                                    4
+#define CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_MASK                                     0x00000010U
+
+/*Pixel Processor (submodule of GPU) block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_DEFVAL                                   0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_SHIFT                                    5
+#define CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_MASK                                     0x00000020U
+
+/*GPU block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GPU_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GPU_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GPU_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GPU_RESET_DEFVAL                                       0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GPU_RESET_SHIFT                                        3
+#define CRF_APB_RST_FPD_TOP_GPU_RESET_MASK                                         0x00000008U
+
+/*GT block level reset*/
+#undef CRF_APB_RST_FPD_TOP_GT_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_GT_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_GT_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_GT_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_GT_RESET_SHIFT                                         2
+#define CRF_APB_RST_FPD_TOP_GT_RESET_MASK                                          0x00000004U
+
+/*Sata block level reset*/
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT                                       1
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_MASK                                        0x00000002U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_SDIO1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_SDIO1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_SDIO1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_SDIO1_RESET_DEFVAL                                    0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_SDIO1_RESET_SHIFT                                     6
+#define CRL_APB_RST_LPD_IOU2_SDIO1_RESET_MASK                                      0x00000040U
+
+/*SD or eMMC selection on SDIO1 0: SD enabled 1: eMMC enabled*/
+#undef IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_DEFVAL 
+#undef IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_SHIFT 
+#undef IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_MASK 
+#define IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_DEFVAL                                   0x00000000
+#define IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_SHIFT                                    15
+#define IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_MASK                                     0x00008000U
+
+/*Should be set based on the final product usage 00 - Removable SCard Slot 01 - Embedded Slot for One Device 10 - Shared Bus Sl
+		t 11 - Reserved*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_DEFVAL                                0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_SHIFT                                 28
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_MASK                                  0x30000000U
+
+/*1.8V Support 1: 1.8V supported 0: 1.8V not supported support*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_DEFVAL                                    0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_SHIFT                                     25
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_MASK                                      0x02000000U
+
+/*3.0V Support 1: 3.0V supported 0: 3.0V not supported support*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_DEFVAL                                    0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_SHIFT                                     24
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_MASK                                      0x01000000U
+
+/*3.3V Support 1: 3.3V supported 0: 3.3V not supported support*/
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_MASK 
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_DEFVAL                                    0x0FFC0FFC
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_SHIFT                                     23
+#define IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_MASK                                      0x00800000U
+
+/*Base Clock Frequency for SD Clock. This is the frequency of the xin_clk.*/
+#undef IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_DEFVAL 
+#undef IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT 
+#undef IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK 
+#define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_DEFVAL                                 0x32403240
+#define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT                                  23
+#define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK                                   0x7F800000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_CAN1_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT                                      8
+#define CRL_APB_RST_LPD_IOU2_CAN1_RESET_MASK                                       0x00000100U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_I2C0_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_I2C0_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_I2C0_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_I2C0_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_I2C0_RESET_SHIFT                                      9
+#define CRL_APB_RST_LPD_IOU2_I2C0_RESET_MASK                                       0x00000200U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_I2C1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_I2C1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_I2C1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_I2C1_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_I2C1_RESET_SHIFT                                      10
+#define CRL_APB_RST_LPD_IOU2_I2C1_RESET_MASK                                       0x00000400U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_SWDT_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_SWDT_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_SWDT_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_SWDT_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_SWDT_RESET_SHIFT                                      15
+#define CRL_APB_RST_LPD_IOU2_SWDT_RESET_MASK                                       0x00008000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC0_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC0_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC0_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC0_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC0_RESET_SHIFT                                      11
+#define CRL_APB_RST_LPD_IOU2_TTC0_RESET_MASK                                       0x00000800U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC1_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC1_RESET_SHIFT                                      12
+#define CRL_APB_RST_LPD_IOU2_TTC1_RESET_MASK                                       0x00001000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC2_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC2_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC2_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC2_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC2_RESET_SHIFT                                      13
+#define CRL_APB_RST_LPD_IOU2_TTC2_RESET_MASK                                       0x00002000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_TTC3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_TTC3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_TTC3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_TTC3_RESET_DEFVAL                                     0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_TTC3_RESET_SHIFT                                      14
+#define CRL_APB_RST_LPD_IOU2_TTC3_RESET_MASK                                       0x00004000U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_UART0_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_UART0_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_UART0_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_UART0_RESET_DEFVAL                                    0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_UART0_RESET_SHIFT                                     1
+#define CRL_APB_RST_LPD_IOU2_UART0_RESET_MASK                                      0x00000002U
+
+/*Block level reset*/
+#undef CRL_APB_RST_LPD_IOU2_UART1_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU2_UART1_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU2_UART1_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU2_UART1_RESET_DEFVAL                                    0x0017FFFF
+#define CRL_APB_RST_LPD_IOU2_UART1_RESET_SHIFT                                     2
+#define CRL_APB_RST_LPD_IOU2_UART1_RESET_MASK                                      0x00000004U
+
+/*Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate*/
+#undef UART0_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL 
+#undef UART0_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT 
+#undef UART0_BAUD_RATE_DIVIDER_REG0_BDIV_MASK 
+#define UART0_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL                                   0x0000000F
+#define UART0_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT                                    0
+#define UART0_BAUD_RATE_DIVIDER_REG0_BDIV_MASK                                     0x000000FFU
+
+/*Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample*/
+#undef UART0_BAUD_RATE_GEN_REG0_CD_DEFVAL 
+#undef UART0_BAUD_RATE_GEN_REG0_CD_SHIFT 
+#undef UART0_BAUD_RATE_GEN_REG0_CD_MASK 
+#define UART0_BAUD_RATE_GEN_REG0_CD_DEFVAL                                         0x0000028B
+#define UART0_BAUD_RATE_GEN_REG0_CD_SHIFT                                          0
+#define UART0_BAUD_RATE_GEN_REG0_CD_MASK                                           0x0000FFFFU
+
+/*Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.*/
+#undef UART0_CONTROL_REG0_STPBRK_DEFVAL 
+#undef UART0_CONTROL_REG0_STPBRK_SHIFT 
+#undef UART0_CONTROL_REG0_STPBRK_MASK 
+#define UART0_CONTROL_REG0_STPBRK_DEFVAL                                           0x00000128
+#define UART0_CONTROL_REG0_STPBRK_SHIFT                                            8
+#define UART0_CONTROL_REG0_STPBRK_MASK                                             0x00000100U
+
+/*Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.*/
+#undef UART0_CONTROL_REG0_STTBRK_DEFVAL 
+#undef UART0_CONTROL_REG0_STTBRK_SHIFT 
+#undef UART0_CONTROL_REG0_STTBRK_MASK 
+#define UART0_CONTROL_REG0_STTBRK_DEFVAL                                           0x00000128
+#define UART0_CONTROL_REG0_STTBRK_SHIFT                                            7
+#define UART0_CONTROL_REG0_STTBRK_MASK                                             0x00000080U
+
+/*Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.*/
+#undef UART0_CONTROL_REG0_RSTTO_DEFVAL 
+#undef UART0_CONTROL_REG0_RSTTO_SHIFT 
+#undef UART0_CONTROL_REG0_RSTTO_MASK 
+#define UART0_CONTROL_REG0_RSTTO_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_RSTTO_SHIFT                                             6
+#define UART0_CONTROL_REG0_RSTTO_MASK                                              0x00000040U
+
+/*Transmit disable: 0: enable transmitter 1: disable transmitter*/
+#undef UART0_CONTROL_REG0_TXDIS_DEFVAL 
+#undef UART0_CONTROL_REG0_TXDIS_SHIFT 
+#undef UART0_CONTROL_REG0_TXDIS_MASK 
+#define UART0_CONTROL_REG0_TXDIS_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_TXDIS_SHIFT                                             5
+#define UART0_CONTROL_REG0_TXDIS_MASK                                              0x00000020U
+
+/*Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.*/
+#undef UART0_CONTROL_REG0_TXEN_DEFVAL 
+#undef UART0_CONTROL_REG0_TXEN_SHIFT 
+#undef UART0_CONTROL_REG0_TXEN_MASK 
+#define UART0_CONTROL_REG0_TXEN_DEFVAL                                             0x00000128
+#define UART0_CONTROL_REG0_TXEN_SHIFT                                              4
+#define UART0_CONTROL_REG0_TXEN_MASK                                               0x00000010U
+
+/*Receive disable: 0: enable 1: disable, regardless of the value of RXEN*/
+#undef UART0_CONTROL_REG0_RXDIS_DEFVAL 
+#undef UART0_CONTROL_REG0_RXDIS_SHIFT 
+#undef UART0_CONTROL_REG0_RXDIS_MASK 
+#define UART0_CONTROL_REG0_RXDIS_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_RXDIS_SHIFT                                             3
+#define UART0_CONTROL_REG0_RXDIS_MASK                                              0x00000008U
+
+/*Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.*/
+#undef UART0_CONTROL_REG0_RXEN_DEFVAL 
+#undef UART0_CONTROL_REG0_RXEN_SHIFT 
+#undef UART0_CONTROL_REG0_RXEN_MASK 
+#define UART0_CONTROL_REG0_RXEN_DEFVAL                                             0x00000128
+#define UART0_CONTROL_REG0_RXEN_SHIFT                                              2
+#define UART0_CONTROL_REG0_RXEN_MASK                                               0x00000004U
+
+/*Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.*/
+#undef UART0_CONTROL_REG0_TXRES_DEFVAL 
+#undef UART0_CONTROL_REG0_TXRES_SHIFT 
+#undef UART0_CONTROL_REG0_TXRES_MASK 
+#define UART0_CONTROL_REG0_TXRES_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_TXRES_SHIFT                                             1
+#define UART0_CONTROL_REG0_TXRES_MASK                                              0x00000002U
+
+/*Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.*/
+#undef UART0_CONTROL_REG0_RXRES_DEFVAL 
+#undef UART0_CONTROL_REG0_RXRES_SHIFT 
+#undef UART0_CONTROL_REG0_RXRES_MASK 
+#define UART0_CONTROL_REG0_RXRES_DEFVAL                                            0x00000128
+#define UART0_CONTROL_REG0_RXRES_SHIFT                                             0
+#define UART0_CONTROL_REG0_RXRES_MASK                                              0x00000001U
+
+/*Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback*/
+#undef UART0_MODE_REG0_CHMODE_DEFVAL 
+#undef UART0_MODE_REG0_CHMODE_SHIFT 
+#undef UART0_MODE_REG0_CHMODE_MASK 
+#define UART0_MODE_REG0_CHMODE_DEFVAL                                              0x00000000
+#define UART0_MODE_REG0_CHMODE_SHIFT                                               8
+#define UART0_MODE_REG0_CHMODE_MASK                                                0x00000300U
+
+/*Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved*/
+#undef UART0_MODE_REG0_NBSTOP_DEFVAL 
+#undef UART0_MODE_REG0_NBSTOP_SHIFT 
+#undef UART0_MODE_REG0_NBSTOP_MASK 
+#define UART0_MODE_REG0_NBSTOP_DEFVAL                                              0x00000000
+#define UART0_MODE_REG0_NBSTOP_SHIFT                                               6
+#define UART0_MODE_REG0_NBSTOP_MASK                                                0x000000C0U
+
+/*Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity*/
+#undef UART0_MODE_REG0_PAR_DEFVAL 
+#undef UART0_MODE_REG0_PAR_SHIFT 
+#undef UART0_MODE_REG0_PAR_MASK 
+#define UART0_MODE_REG0_PAR_DEFVAL                                                 0x00000000
+#define UART0_MODE_REG0_PAR_SHIFT                                                  3
+#define UART0_MODE_REG0_PAR_MASK                                                   0x00000038U
+
+/*Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits*/
+#undef UART0_MODE_REG0_CHRL_DEFVAL 
+#undef UART0_MODE_REG0_CHRL_SHIFT 
+#undef UART0_MODE_REG0_CHRL_MASK 
+#define UART0_MODE_REG0_CHRL_DEFVAL                                                0x00000000
+#define UART0_MODE_REG0_CHRL_SHIFT                                                 1
+#define UART0_MODE_REG0_CHRL_MASK                                                  0x00000006U
+
+/*Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8*/
+#undef UART0_MODE_REG0_CLKS_DEFVAL 
+#undef UART0_MODE_REG0_CLKS_SHIFT 
+#undef UART0_MODE_REG0_CLKS_MASK 
+#define UART0_MODE_REG0_CLKS_DEFVAL                                                0x00000000
+#define UART0_MODE_REG0_CLKS_SHIFT                                                 0
+#define UART0_MODE_REG0_CLKS_MASK                                                  0x00000001U
+
+/*Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate*/
+#undef UART1_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL 
+#undef UART1_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT 
+#undef UART1_BAUD_RATE_DIVIDER_REG0_BDIV_MASK 
+#define UART1_BAUD_RATE_DIVIDER_REG0_BDIV_DEFVAL                                   0x0000000F
+#define UART1_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT                                    0
+#define UART1_BAUD_RATE_DIVIDER_REG0_BDIV_MASK                                     0x000000FFU
+
+/*Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample*/
+#undef UART1_BAUD_RATE_GEN_REG0_CD_DEFVAL 
+#undef UART1_BAUD_RATE_GEN_REG0_CD_SHIFT 
+#undef UART1_BAUD_RATE_GEN_REG0_CD_MASK 
+#define UART1_BAUD_RATE_GEN_REG0_CD_DEFVAL                                         0x0000028B
+#define UART1_BAUD_RATE_GEN_REG0_CD_SHIFT                                          0
+#define UART1_BAUD_RATE_GEN_REG0_CD_MASK                                           0x0000FFFFU
+
+/*Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
+		high level during 12 bit periods. It can be set regardless of the value of STTBRK.*/
+#undef UART1_CONTROL_REG0_STPBRK_DEFVAL 
+#undef UART1_CONTROL_REG0_STPBRK_SHIFT 
+#undef UART1_CONTROL_REG0_STPBRK_MASK 
+#define UART1_CONTROL_REG0_STPBRK_DEFVAL                                           0x00000128
+#define UART1_CONTROL_REG0_STPBRK_SHIFT                                            8
+#define UART1_CONTROL_REG0_STPBRK_MASK                                             0x00000100U
+
+/*Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
+		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.*/
+#undef UART1_CONTROL_REG0_STTBRK_DEFVAL 
+#undef UART1_CONTROL_REG0_STTBRK_SHIFT 
+#undef UART1_CONTROL_REG0_STTBRK_MASK 
+#define UART1_CONTROL_REG0_STTBRK_DEFVAL                                           0x00000128
+#define UART1_CONTROL_REG0_STTBRK_SHIFT                                            7
+#define UART1_CONTROL_REG0_STTBRK_MASK                                             0x00000080U
+
+/*Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
+		pleted.*/
+#undef UART1_CONTROL_REG0_RSTTO_DEFVAL 
+#undef UART1_CONTROL_REG0_RSTTO_SHIFT 
+#undef UART1_CONTROL_REG0_RSTTO_MASK 
+#define UART1_CONTROL_REG0_RSTTO_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_RSTTO_SHIFT                                             6
+#define UART1_CONTROL_REG0_RSTTO_MASK                                              0x00000040U
+
+/*Transmit disable: 0: enable transmitter 1: disable transmitter*/
+#undef UART1_CONTROL_REG0_TXDIS_DEFVAL 
+#undef UART1_CONTROL_REG0_TXDIS_SHIFT 
+#undef UART1_CONTROL_REG0_TXDIS_MASK 
+#define UART1_CONTROL_REG0_TXDIS_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_TXDIS_SHIFT                                             5
+#define UART1_CONTROL_REG0_TXDIS_MASK                                              0x00000020U
+
+/*Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.*/
+#undef UART1_CONTROL_REG0_TXEN_DEFVAL 
+#undef UART1_CONTROL_REG0_TXEN_SHIFT 
+#undef UART1_CONTROL_REG0_TXEN_MASK 
+#define UART1_CONTROL_REG0_TXEN_DEFVAL                                             0x00000128
+#define UART1_CONTROL_REG0_TXEN_SHIFT                                              4
+#define UART1_CONTROL_REG0_TXEN_MASK                                               0x00000010U
+
+/*Receive disable: 0: enable 1: disable, regardless of the value of RXEN*/
+#undef UART1_CONTROL_REG0_RXDIS_DEFVAL 
+#undef UART1_CONTROL_REG0_RXDIS_SHIFT 
+#undef UART1_CONTROL_REG0_RXDIS_MASK 
+#define UART1_CONTROL_REG0_RXDIS_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_RXDIS_SHIFT                                             3
+#define UART1_CONTROL_REG0_RXDIS_MASK                                              0x00000008U
+
+/*Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.*/
+#undef UART1_CONTROL_REG0_RXEN_DEFVAL 
+#undef UART1_CONTROL_REG0_RXEN_SHIFT 
+#undef UART1_CONTROL_REG0_RXEN_MASK 
+#define UART1_CONTROL_REG0_RXEN_DEFVAL                                             0x00000128
+#define UART1_CONTROL_REG0_RXEN_SHIFT                                              2
+#define UART1_CONTROL_REG0_RXEN_MASK                                               0x00000004U
+
+/*Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
+		 bit is self clearing once the reset has completed.*/
+#undef UART1_CONTROL_REG0_TXRES_DEFVAL 
+#undef UART1_CONTROL_REG0_TXRES_SHIFT 
+#undef UART1_CONTROL_REG0_TXRES_MASK 
+#define UART1_CONTROL_REG0_TXRES_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_TXRES_SHIFT                                             1
+#define UART1_CONTROL_REG0_TXRES_MASK                                              0x00000002U
+
+/*Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
+		is self clearing once the reset has completed.*/
+#undef UART1_CONTROL_REG0_RXRES_DEFVAL 
+#undef UART1_CONTROL_REG0_RXRES_SHIFT 
+#undef UART1_CONTROL_REG0_RXRES_MASK 
+#define UART1_CONTROL_REG0_RXRES_DEFVAL                                            0x00000128
+#define UART1_CONTROL_REG0_RXRES_SHIFT                                             0
+#define UART1_CONTROL_REG0_RXRES_MASK                                              0x00000001U
+
+/*Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback*/
+#undef UART1_MODE_REG0_CHMODE_DEFVAL 
+#undef UART1_MODE_REG0_CHMODE_SHIFT 
+#undef UART1_MODE_REG0_CHMODE_MASK 
+#define UART1_MODE_REG0_CHMODE_DEFVAL                                              0x00000000
+#define UART1_MODE_REG0_CHMODE_SHIFT                                               8
+#define UART1_MODE_REG0_CHMODE_MASK                                                0x00000300U
+
+/*Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
+		stop bits 10: 2 stop bits 11: reserved*/
+#undef UART1_MODE_REG0_NBSTOP_DEFVAL 
+#undef UART1_MODE_REG0_NBSTOP_SHIFT 
+#undef UART1_MODE_REG0_NBSTOP_MASK 
+#define UART1_MODE_REG0_NBSTOP_DEFVAL                                              0x00000000
+#define UART1_MODE_REG0_NBSTOP_SHIFT                                               6
+#define UART1_MODE_REG0_NBSTOP_MASK                                                0x000000C0U
+
+/*Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
+		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity*/
+#undef UART1_MODE_REG0_PAR_DEFVAL 
+#undef UART1_MODE_REG0_PAR_SHIFT 
+#undef UART1_MODE_REG0_PAR_MASK 
+#define UART1_MODE_REG0_PAR_DEFVAL                                                 0x00000000
+#define UART1_MODE_REG0_PAR_SHIFT                                                  3
+#define UART1_MODE_REG0_PAR_MASK                                                   0x00000038U
+
+/*Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits*/
+#undef UART1_MODE_REG0_CHRL_DEFVAL 
+#undef UART1_MODE_REG0_CHRL_SHIFT 
+#undef UART1_MODE_REG0_CHRL_MASK 
+#define UART1_MODE_REG0_CHRL_DEFVAL                                                0x00000000
+#define UART1_MODE_REG0_CHRL_SHIFT                                                 1
+#define UART1_MODE_REG0_CHRL_MASK                                                  0x00000006U
+
+/*Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
+		source is uart_ref_clk 1: clock source is uart_ref_clk/8*/
+#undef UART1_MODE_REG0_CLKS_DEFVAL 
+#undef UART1_MODE_REG0_CLKS_SHIFT 
+#undef UART1_MODE_REG0_CLKS_MASK 
+#define UART1_MODE_REG0_CLKS_DEFVAL                                                0x00000000
+#define UART1_MODE_REG0_CLKS_SHIFT                                                 0
+#define UART1_MODE_REG0_CLKS_MASK                                                  0x00000001U
+
+/*TrustZone Classification for ADMA*/
+#undef LPD_SLCR_SECURE_SLCR_ADMA_TZ_DEFVAL 
+#undef LPD_SLCR_SECURE_SLCR_ADMA_TZ_SHIFT 
+#undef LPD_SLCR_SECURE_SLCR_ADMA_TZ_MASK 
+#define LPD_SLCR_SECURE_SLCR_ADMA_TZ_DEFVAL                                        
+#define LPD_SLCR_SECURE_SLCR_ADMA_TZ_SHIFT                                         0
+#define LPD_SLCR_SECURE_SLCR_ADMA_TZ_MASK                                          0x000000FFU
+
+/*CSU regsiter*/
+#undef CSU_TAMPER_STATUS_TAMPER_0_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_0_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_0_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_0_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_0_SHIFT                                           0
+#define CSU_TAMPER_STATUS_TAMPER_0_MASK                                            0x00000001U
+
+/*External MIO*/
+#undef CSU_TAMPER_STATUS_TAMPER_1_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_1_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_1_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_1_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_1_SHIFT                                           1
+#define CSU_TAMPER_STATUS_TAMPER_1_MASK                                            0x00000002U
+
+/*JTAG toggle detect*/
+#undef CSU_TAMPER_STATUS_TAMPER_2_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_2_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_2_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_2_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_2_SHIFT                                           2
+#define CSU_TAMPER_STATUS_TAMPER_2_MASK                                            0x00000004U
+
+/*PL SEU error*/
+#undef CSU_TAMPER_STATUS_TAMPER_3_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_3_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_3_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_3_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_3_SHIFT                                           3
+#define CSU_TAMPER_STATUS_TAMPER_3_MASK                                            0x00000008U
+
+/*AMS over temperature alarm for LPD*/
+#undef CSU_TAMPER_STATUS_TAMPER_4_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_4_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_4_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_4_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_4_SHIFT                                           4
+#define CSU_TAMPER_STATUS_TAMPER_4_MASK                                            0x00000010U
+
+/*AMS over temperature alarm for APU*/
+#undef CSU_TAMPER_STATUS_TAMPER_5_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_5_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_5_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_5_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_5_SHIFT                                           5
+#define CSU_TAMPER_STATUS_TAMPER_5_MASK                                            0x00000020U
+
+/*AMS voltage alarm for VCCPINT_FPD*/
+#undef CSU_TAMPER_STATUS_TAMPER_6_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_6_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_6_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_6_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_6_SHIFT                                           6
+#define CSU_TAMPER_STATUS_TAMPER_6_MASK                                            0x00000040U
+
+/*AMS voltage alarm for VCCPINT_LPD*/
+#undef CSU_TAMPER_STATUS_TAMPER_7_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_7_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_7_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_7_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_7_SHIFT                                           7
+#define CSU_TAMPER_STATUS_TAMPER_7_MASK                                            0x00000080U
+
+/*AMS voltage alarm for VCCPAUX*/
+#undef CSU_TAMPER_STATUS_TAMPER_8_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_8_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_8_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_8_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_8_SHIFT                                           8
+#define CSU_TAMPER_STATUS_TAMPER_8_MASK                                            0x00000100U
+
+/*AMS voltage alarm for DDRPHY*/
+#undef CSU_TAMPER_STATUS_TAMPER_9_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_9_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_9_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_9_DEFVAL                                          0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_9_SHIFT                                           9
+#define CSU_TAMPER_STATUS_TAMPER_9_MASK                                            0x00000200U
+
+/*AMS voltage alarm for PSIO bank 0/1/2*/
+#undef CSU_TAMPER_STATUS_TAMPER_10_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_10_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_10_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_10_DEFVAL                                         0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_10_SHIFT                                          10
+#define CSU_TAMPER_STATUS_TAMPER_10_MASK                                           0x00000400U
+
+/*AMS voltage alarm for PSIO bank 3 (dedicated pins)*/
+#undef CSU_TAMPER_STATUS_TAMPER_11_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_11_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_11_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_11_DEFVAL                                         0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_11_SHIFT                                          11
+#define CSU_TAMPER_STATUS_TAMPER_11_MASK                                           0x00000800U
+
+/*AMS voltaage alarm for GT*/
+#undef CSU_TAMPER_STATUS_TAMPER_12_DEFVAL 
+#undef CSU_TAMPER_STATUS_TAMPER_12_SHIFT 
+#undef CSU_TAMPER_STATUS_TAMPER_12_MASK 
+#define CSU_TAMPER_STATUS_TAMPER_12_DEFVAL                                         0x00000000
+#define CSU_TAMPER_STATUS_TAMPER_12_SHIFT                                          12
+#define CSU_TAMPER_STATUS_TAMPER_12_MASK                                           0x00001000U
+
+/*Set ACE outgoing AWQOS value*/
+#undef APU_ACE_CTRL_AWQOS_DEFVAL 
+#undef APU_ACE_CTRL_AWQOS_SHIFT 
+#undef APU_ACE_CTRL_AWQOS_MASK 
+#define APU_ACE_CTRL_AWQOS_DEFVAL                                                  0x000F000F
+#define APU_ACE_CTRL_AWQOS_SHIFT                                                   16
+#define APU_ACE_CTRL_AWQOS_MASK                                                    0x000F0000U
+
+/*Set ACE outgoing ARQOS value*/
+#undef APU_ACE_CTRL_ARQOS_DEFVAL 
+#undef APU_ACE_CTRL_ARQOS_SHIFT 
+#undef APU_ACE_CTRL_ARQOS_MASK 
+#define APU_ACE_CTRL_ARQOS_DEFVAL                                                  0x000F000F
+#define APU_ACE_CTRL_ARQOS_SHIFT                                                   0
+#define APU_ACE_CTRL_ARQOS_MASK                                                    0x0000000FU
+
+/*Enables the RTC. By writing a 0 to this bit, RTC will be powered off and the only module that potentially draws current from 
+		he battery will be BBRAM. The value read through this bit does not necessarily reflect whether RTC is enabled or not. It is e
+		pected that RTC is enabled every time it is being configured. If RTC is not used in the design, FSBL will disable it by writi
+		g a 0 to this bit.*/
+#undef RTC_CONTROL_BATTERY_DISABLE_DEFVAL 
+#undef RTC_CONTROL_BATTERY_DISABLE_SHIFT 
+#undef RTC_CONTROL_BATTERY_DISABLE_MASK 
+#define RTC_CONTROL_BATTERY_DISABLE_DEFVAL                                         0x01000000
+#define RTC_CONTROL_BATTERY_DISABLE_SHIFT                                          31
+#define RTC_CONTROL_BATTERY_DISABLE_MASK                                           0x80000000U
+#undef SERDES_PLL_REF_SEL0_OFFSET 
+#define SERDES_PLL_REF_SEL0_OFFSET                                                 0XFD410000
+#undef SERDES_PLL_REF_SEL1_OFFSET 
+#define SERDES_PLL_REF_SEL1_OFFSET                                                 0XFD410004
+#undef SERDES_PLL_REF_SEL2_OFFSET 
+#define SERDES_PLL_REF_SEL2_OFFSET                                                 0XFD410008
+#undef SERDES_PLL_REF_SEL3_OFFSET 
+#define SERDES_PLL_REF_SEL3_OFFSET                                                 0XFD41000C
+#undef SERDES_L0_L0_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L0_REF_CLK_SEL_OFFSET                                            0XFD402860
+#undef SERDES_L0_L1_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L1_REF_CLK_SEL_OFFSET                                            0XFD402864
+#undef SERDES_L0_L2_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L2_REF_CLK_SEL_OFFSET                                            0XFD402868
+#undef SERDES_L0_L3_REF_CLK_SEL_OFFSET 
+#define SERDES_L0_L3_REF_CLK_SEL_OFFSET                                            0XFD40286C
+#undef SERDES_L2_TM_PLL_DIG_37_OFFSET 
+#define SERDES_L2_TM_PLL_DIG_37_OFFSET                                             0XFD40A094
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_OFFSET                                        0XFD40A368
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_OFFSET                                        0XFD40A36C
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET                                        0XFD40E368
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET                                        0XFD40E36C
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET                                        0XFD406368
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET                                        0XFD40636C
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET                                    0XFD406370
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET                                        0XFD406374
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET                                        0XFD406378
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_OFFSET 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_OFFSET                                    0XFD40637C
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_OFFSET                                    0XFD40A370
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_OFFSET                                        0XFD40A374
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_OFFSET                                        0XFD40A378
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_OFFSET 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_OFFSET                                    0XFD40A37C
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET                                    0XFD40E370
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET                                        0XFD40E374
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET                                        0XFD40E378
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_OFFSET 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_OFFSET                                    0XFD40E37C
+#undef SERDES_L2_TM_DIG_6_OFFSET 
+#define SERDES_L2_TM_DIG_6_OFFSET                                                  0XFD40906C
+#undef SERDES_L2_TX_DIG_TM_61_OFFSET 
+#define SERDES_L2_TX_DIG_TM_61_OFFSET                                              0XFD4080F4
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_OFFSET 
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_OFFSET                                      0XFD40E360
+#undef SERDES_L3_TM_DIG_6_OFFSET 
+#define SERDES_L3_TM_DIG_6_OFFSET                                                  0XFD40D06C
+#undef SERDES_L3_TX_DIG_TM_61_OFFSET 
+#define SERDES_L3_TX_DIG_TM_61_OFFSET                                              0XFD40C0F4
+#undef SERDES_L3_TXPMA_ST_0_OFFSET 
+#define SERDES_L3_TXPMA_ST_0_OFFSET                                                0XFD40CB00
+#undef SERDES_ICM_CFG0_OFFSET 
+#define SERDES_ICM_CFG0_OFFSET                                                     0XFD410010
+#undef SERDES_ICM_CFG1_OFFSET 
+#define SERDES_ICM_CFG1_OFFSET                                                     0XFD410014
+#undef SERDES_L1_TXPMD_TM_45_OFFSET 
+#define SERDES_L1_TXPMD_TM_45_OFFSET                                               0XFD404CB4
+#undef SERDES_L1_TX_ANA_TM_118_OFFSET 
+#define SERDES_L1_TX_ANA_TM_118_OFFSET                                             0XFD4041D8
+#undef SERDES_L1_TXPMD_TM_48_OFFSET 
+#define SERDES_L1_TXPMD_TM_48_OFFSET                                               0XFD404CC0
+#undef SERDES_L1_TX_ANA_TM_18_OFFSET 
+#define SERDES_L1_TX_ANA_TM_18_OFFSET                                              0XFD404048
+
+/*PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL0_PLLREFSEL0_DEFVAL 
+#undef SERDES_PLL_REF_SEL0_PLLREFSEL0_SHIFT 
+#undef SERDES_PLL_REF_SEL0_PLLREFSEL0_MASK 
+#define SERDES_PLL_REF_SEL0_PLLREFSEL0_DEFVAL                                      0x0000000D
+#define SERDES_PLL_REF_SEL0_PLLREFSEL0_SHIFT                                       0
+#define SERDES_PLL_REF_SEL0_PLLREFSEL0_MASK                                        0x0000001FU
+
+/*PLL1 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL1_PLLREFSEL1_DEFVAL 
+#undef SERDES_PLL_REF_SEL1_PLLREFSEL1_SHIFT 
+#undef SERDES_PLL_REF_SEL1_PLLREFSEL1_MASK 
+#define SERDES_PLL_REF_SEL1_PLLREFSEL1_DEFVAL                                      0x00000008
+#define SERDES_PLL_REF_SEL1_PLLREFSEL1_SHIFT                                       0
+#define SERDES_PLL_REF_SEL1_PLLREFSEL1_MASK                                        0x0000001FU
+
+/*PLL2 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL2_PLLREFSEL2_DEFVAL 
+#undef SERDES_PLL_REF_SEL2_PLLREFSEL2_SHIFT 
+#undef SERDES_PLL_REF_SEL2_PLLREFSEL2_MASK 
+#define SERDES_PLL_REF_SEL2_PLLREFSEL2_DEFVAL                                      0x0000000F
+#define SERDES_PLL_REF_SEL2_PLLREFSEL2_SHIFT                                       0
+#define SERDES_PLL_REF_SEL2_PLLREFSEL2_MASK                                        0x0000001FU
+
+/*PLL3 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
+		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
+		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved*/
+#undef SERDES_PLL_REF_SEL3_PLLREFSEL3_DEFVAL 
+#undef SERDES_PLL_REF_SEL3_PLLREFSEL3_SHIFT 
+#undef SERDES_PLL_REF_SEL3_PLLREFSEL3_MASK 
+#define SERDES_PLL_REF_SEL3_PLLREFSEL3_DEFVAL                                      0x0000000E
+#define SERDES_PLL_REF_SEL3_PLLREFSEL3_SHIFT                                       0
+#define SERDES_PLL_REF_SEL3_PLLREFSEL3_MASK                                        0x0000001FU
+
+/*Sel of lane 0 ref clock local mux. Set to 1 to select lane 0 slicer output. Set to 0 to select lane0 ref clock mux output.*/
+#undef SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Sel of lane 1 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane1 ref clock mux output.*/
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Bit 3 of lane 1 ref clock mux one hot sel. Set to 1 to select lane 3 slicer output from ref clock network*/
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_DEFVAL 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_SHIFT 
+#undef SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_MASK 
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_DEFVAL                           0x00000080
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_SHIFT                            3
+#define SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_MASK                             0x00000008U
+
+/*Sel of lane 2 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane2 ref clock mux output.*/
+#undef SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Sel of lane 3 ref clock local mux. Set to 1 to select lane 3 slicer output. Set to 0 to select lane3 ref clock mux output.*/
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_DEFVAL 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_SHIFT 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_MASK 
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_DEFVAL                         0x00000080
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_SHIFT                          7
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_MASK                           0x00000080U
+
+/*Bit 1 of lane 3 ref clock mux one hot sel. Set to 1 to select lane 1 slicer output from ref clock network*/
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_DEFVAL 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_SHIFT 
+#undef SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_MASK 
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_DEFVAL                           0x00000080
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_SHIFT                            1
+#define SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_MASK                             0x00000002U
+
+/*Enable/Disable coarse code satureation limiting logic*/
+#undef SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_DEFVAL 
+#undef SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_SHIFT 
+#undef SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_MASK 
+#define SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_DEFVAL                 0x00000000
+#define SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_SHIFT                  4
+#define SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_MASK                   0x00000010U
+
+/*Spread Spectrum No of Steps [7:0]*/
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK 
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL                  0x00000000
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT                   0
+#define SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK                    0x000000FFU
+
+/*Spread Spectrum No of Steps [10:8]*/
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK 
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL                  0x00000000
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT                   0
+#define SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK                    0x00000007U
+
+/*Spread Spectrum No of Steps [7:0]*/
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK 
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL                  0x00000000
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT                   0
+#define SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK                    0x000000FFU
+
+/*Spread Spectrum No of Steps [10:8]*/
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK 
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL                  0x00000000
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT                   0
+#define SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK                    0x00000007U
+
+/*Spread Spectrum No of Steps [7:0]*/
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK 
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_DEFVAL                  0x00000000
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT                   0
+#define SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK                    0x000000FFU
+
+/*Spread Spectrum No of Steps [10:8]*/
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK 
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_DEFVAL                  0x00000000
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT                   0
+#define SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK                    0x00000007U
+
+/*Step Size for Spread Spectrum [7:0]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL                 0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT                  0
+#define SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK                   0x000000FFU
+
+/*Step Size for Spread Spectrum [15:8]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL                         0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT                          0
+#define SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [23:16]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL                         0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT                          0
+#define SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [25:24]*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL                 0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT                  0
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK                   0x00000003U
+
+/*Enable/Disable test mode force on SS step size*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL                 0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT                  4
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK                   0x00000010U
+
+/*Enable/Disable test mode force on SS no of steps*/
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT 
+#undef SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK 
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL              0x00000000
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT               5
+#define SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK                0x00000020U
+
+/*Step Size for Spread Spectrum [7:0]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL                 0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT                  0
+#define SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK                   0x000000FFU
+
+/*Step Size for Spread Spectrum [15:8]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL                         0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT                          0
+#define SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [23:16]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL                         0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT                          0
+#define SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [25:24]*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL                 0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT                  0
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK                   0x00000003U
+
+/*Enable/Disable test mode force on SS step size*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL                 0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT                  4
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK                   0x00000010U
+
+/*Enable/Disable test mode force on SS no of steps*/
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT 
+#undef SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK 
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL              0x00000000
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT               5
+#define SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK                0x00000020U
+
+/*Step Size for Spread Spectrum [7:0]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_DEFVAL                 0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT                  0
+#define SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK                   0x000000FFU
+
+/*Step Size for Spread Spectrum [15:8]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_DEFVAL                         0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT                          0
+#define SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [23:16]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_DEFVAL                         0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT                          0
+#define SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK                           0x000000FFU
+
+/*Step Size for Spread Spectrum [25:24]*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_DEFVAL                 0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT                  0
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK                   0x00000003U
+
+/*Enable/Disable test mode force on SS step size*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_DEFVAL                 0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT                  4
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK                   0x00000010U
+
+/*Enable/Disable test mode force on SS no of steps*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_DEFVAL              0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT               5
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK                0x00000020U
+
+/*Enable test mode forcing on enable Spread Spectrum*/
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_DEFVAL 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_SHIFT 
+#undef SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_MASK 
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_DEFVAL                     0x00000000
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_SHIFT                      7
+#define SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_MASK                       0x00000080U
+
+/*Bypass Descrambler*/
+#undef SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_MASK 
+#define SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_DEFVAL                                   0x00000000
+#define SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_SHIFT                                    1
+#define SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_MASK                                     0x00000002U
+
+/*Enable Bypass for <1> TM_DIG_CTRL_6*/
+#undef SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK 
+#define SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL                             0x00000000
+#define SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT                              0
+#define SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK                               0x00000001U
+
+/*Bypass scrambler signal*/
+#undef SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_MASK 
+#define SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL                                 0x00000000
+#define SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT                                  1
+#define SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_MASK                                   0x00000002U
+
+/*Enable/disable scrambler bypass signal*/
+#undef SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK 
+#define SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL                           0x00000000
+#define SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT                            0
+#define SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK                             0x00000001U
+
+/*Enable test mode force on fractional mode enable*/
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_DEFVAL 
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_SHIFT 
+#undef SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_MASK 
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_DEFVAL                     0x00000000
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_SHIFT                      6
+#define SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_MASK                       0x00000040U
+
+/*Bypass 8b10b decoder*/
+#undef SERDES_L3_TM_DIG_6_BYPASS_DECODER_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DECODER_SHIFT 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DECODER_MASK 
+#define SERDES_L3_TM_DIG_6_BYPASS_DECODER_DEFVAL                                   0x00000000
+#define SERDES_L3_TM_DIG_6_BYPASS_DECODER_SHIFT                                    3
+#define SERDES_L3_TM_DIG_6_BYPASS_DECODER_MASK                                     0x00000008U
+
+/*Enable Bypass for <3> TM_DIG_CTRL_6*/
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_SHIFT 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_MASK 
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_DEFVAL                                 0x00000000
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_SHIFT                                  2
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_MASK                                   0x00000004U
+
+/*Bypass Descrambler*/
+#undef SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_MASK 
+#define SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_DEFVAL                                   0x00000000
+#define SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_SHIFT                                    1
+#define SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_MASK                                     0x00000002U
+
+/*Enable Bypass for <1> TM_DIG_CTRL_6*/
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT 
+#undef SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK 
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_DEFVAL                             0x00000000
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT                              0
+#define SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK                               0x00000001U
+
+/*Enable/disable encoder bypass signal*/
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_DEFVAL 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_SHIFT 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_MASK 
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_DEFVAL                                   0x00000000
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_SHIFT                                    3
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_MASK                                     0x00000008U
+
+/*Bypass scrambler signal*/
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_MASK 
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_DEFVAL                                 0x00000000
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT                                  1
+#define SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_MASK                                   0x00000002U
+
+/*Enable/disable scrambler bypass signal*/
+#undef SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL 
+#undef SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT 
+#undef SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK 
+#define SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_DEFVAL                           0x00000000
+#define SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT                            0
+#define SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK                             0x00000001U
+
+/*PHY Mode: 4'b000 - PCIe, 4'b001 - USB3, 4'b0010 - SATA, 4'b0100 - SGMII, 4'b0101 - DP, 4'b1000 - MPHY*/
+#undef SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_DEFVAL 
+#undef SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT 
+#undef SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK 
+#define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_DEFVAL                                    0x00000001
+#define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT                                     4
+#define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK                                      0x000000F0U
+
+/*Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse
+		, 7 - Unused*/
+#undef SERDES_ICM_CFG0_L0_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG0_L0_ICM_CFG_MASK 
+#define SERDES_ICM_CFG0_L0_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT                                           0
+#define SERDES_ICM_CFG0_L0_ICM_CFG_MASK                                            0x00000007U
+
+/*Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused
+		 7 - Unused*/
+#undef SERDES_ICM_CFG0_L1_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG0_L1_ICM_CFG_MASK 
+#define SERDES_ICM_CFG0_L1_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT                                           4
+#define SERDES_ICM_CFG0_L1_ICM_CFG_MASK                                            0x00000070U
+
+/*Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused
+		 7 - Unused*/
+#undef SERDES_ICM_CFG1_L2_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG1_L2_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG1_L2_ICM_CFG_MASK 
+#define SERDES_ICM_CFG1_L2_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG1_L2_ICM_CFG_SHIFT                                           0
+#define SERDES_ICM_CFG1_L2_ICM_CFG_MASK                                            0x00000007U
+
+/*Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused
+		 7 - Unused*/
+#undef SERDES_ICM_CFG1_L3_ICM_CFG_DEFVAL 
+#undef SERDES_ICM_CFG1_L3_ICM_CFG_SHIFT 
+#undef SERDES_ICM_CFG1_L3_ICM_CFG_MASK 
+#define SERDES_ICM_CFG1_L3_ICM_CFG_DEFVAL                                          0x00000000
+#define SERDES_ICM_CFG1_L3_ICM_CFG_SHIFT                                           4
+#define SERDES_ICM_CFG1_L3_ICM_CFG_MASK                                            0x00000070U
+
+/*Enable/disable DP post2 path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_DEFVAL                 0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT                  5
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK                   0x00000020U
+
+/*Override enable/disable of DP post2 path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_DEFVAL            0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT             4
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK              0x00000010U
+
+/*Override enable/disable of DP post1 path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_DEFVAL            0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT             2
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK              0x00000004U
+
+/*Enable/disable DP main path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_DEFVAL                  0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT                   1
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK                    0x00000002U
+
+/*Override enable/disable of DP main path*/
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT 
+#undef SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK 
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_DEFVAL             0x00000000
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT              0
+#define SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK               0x00000001U
+
+/*Test register force for enabling/disablign TX deemphasis bits <17:0>*/
+#undef SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL 
+#undef SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT 
+#undef SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK 
+#define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL                        0x00000000
+#define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT                         0
+#define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK                          0x00000001U
+
+/*Margining factor value*/
+#undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_DEFVAL 
+#undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT 
+#undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_MASK 
+#define SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_DEFVAL                 0x00000000
+#define SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT                  0
+#define SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_MASK                   0x0000001FU
+
+/*pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved*/
+#undef SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL 
+#undef SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT 
+#undef SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK 
+#define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL                           0x00000002
+#define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT                            0
+#define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK                             0x000000FFU
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef USB3_0_FPD_POWER_PRSNT_OFFSET 
+#define USB3_0_FPD_POWER_PRSNT_OFFSET                                              0XFF9D0080
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef CRL_APB_RST_LPD_IOU0_OFFSET 
+#define CRL_APB_RST_LPD_IOU0_OFFSET                                                0XFF5E0230
+#undef SIOU_SATA_MISC_CTRL_OFFSET 
+#define SIOU_SATA_MISC_CTRL_OFFSET                                                 0XFD3D0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef DP_DP_PHY_RESET_OFFSET 
+#define DP_DP_PHY_RESET_OFFSET                                                     0XFD4A0200
+#undef DP_DP_TX_PHY_POWER_DOWN_OFFSET 
+#define DP_DP_TX_PHY_POWER_DOWN_OFFSET                                             0XFD4A0238
+#undef USB3_0_XHCI_GUSB2PHYCFG_OFFSET 
+#define USB3_0_XHCI_GUSB2PHYCFG_OFFSET                                             0XFE20C200
+#undef USB3_0_XHCI_GFLADJ_OFFSET 
+#define USB3_0_XHCI_GFLADJ_OFFSET                                                  0XFE20C630
+#undef PCIE_ATTRIB_ATTR_37_OFFSET 
+#define PCIE_ATTRIB_ATTR_37_OFFSET                                                 0XFD480094
+#undef PCIE_ATTRIB_ATTR_25_OFFSET 
+#define PCIE_ATTRIB_ATTR_25_OFFSET                                                 0XFD480064
+#undef PCIE_ATTRIB_ATTR_7_OFFSET 
+#define PCIE_ATTRIB_ATTR_7_OFFSET                                                  0XFD48001C
+#undef PCIE_ATTRIB_ATTR_8_OFFSET 
+#define PCIE_ATTRIB_ATTR_8_OFFSET                                                  0XFD480020
+#undef PCIE_ATTRIB_ATTR_9_OFFSET 
+#define PCIE_ATTRIB_ATTR_9_OFFSET                                                  0XFD480024
+#undef PCIE_ATTRIB_ATTR_10_OFFSET 
+#define PCIE_ATTRIB_ATTR_10_OFFSET                                                 0XFD480028
+#undef PCIE_ATTRIB_ATTR_11_OFFSET 
+#define PCIE_ATTRIB_ATTR_11_OFFSET                                                 0XFD48002C
+#undef PCIE_ATTRIB_ATTR_12_OFFSET 
+#define PCIE_ATTRIB_ATTR_12_OFFSET                                                 0XFD480030
+#undef PCIE_ATTRIB_ATTR_13_OFFSET 
+#define PCIE_ATTRIB_ATTR_13_OFFSET                                                 0XFD480034
+#undef PCIE_ATTRIB_ATTR_14_OFFSET 
+#define PCIE_ATTRIB_ATTR_14_OFFSET                                                 0XFD480038
+#undef PCIE_ATTRIB_ATTR_15_OFFSET 
+#define PCIE_ATTRIB_ATTR_15_OFFSET                                                 0XFD48003C
+#undef PCIE_ATTRIB_ATTR_16_OFFSET 
+#define PCIE_ATTRIB_ATTR_16_OFFSET                                                 0XFD480040
+#undef PCIE_ATTRIB_ATTR_17_OFFSET 
+#define PCIE_ATTRIB_ATTR_17_OFFSET                                                 0XFD480044
+#undef PCIE_ATTRIB_ATTR_18_OFFSET 
+#define PCIE_ATTRIB_ATTR_18_OFFSET                                                 0XFD480048
+#undef PCIE_ATTRIB_ATTR_27_OFFSET 
+#define PCIE_ATTRIB_ATTR_27_OFFSET                                                 0XFD48006C
+#undef PCIE_ATTRIB_ATTR_50_OFFSET 
+#define PCIE_ATTRIB_ATTR_50_OFFSET                                                 0XFD4800C8
+#undef PCIE_ATTRIB_ATTR_105_OFFSET 
+#define PCIE_ATTRIB_ATTR_105_OFFSET                                                0XFD4801A4
+#undef PCIE_ATTRIB_ATTR_106_OFFSET 
+#define PCIE_ATTRIB_ATTR_106_OFFSET                                                0XFD4801A8
+#undef PCIE_ATTRIB_ATTR_107_OFFSET 
+#define PCIE_ATTRIB_ATTR_107_OFFSET                                                0XFD4801AC
+#undef PCIE_ATTRIB_ATTR_108_OFFSET 
+#define PCIE_ATTRIB_ATTR_108_OFFSET                                                0XFD4801B0
+#undef PCIE_ATTRIB_ATTR_109_OFFSET 
+#define PCIE_ATTRIB_ATTR_109_OFFSET                                                0XFD4801B4
+#undef PCIE_ATTRIB_ATTR_34_OFFSET 
+#define PCIE_ATTRIB_ATTR_34_OFFSET                                                 0XFD480088
+#undef PCIE_ATTRIB_ATTR_53_OFFSET 
+#define PCIE_ATTRIB_ATTR_53_OFFSET                                                 0XFD4800D4
+#undef PCIE_ATTRIB_ATTR_41_OFFSET 
+#define PCIE_ATTRIB_ATTR_41_OFFSET                                                 0XFD4800A4
+#undef PCIE_ATTRIB_ATTR_97_OFFSET 
+#define PCIE_ATTRIB_ATTR_97_OFFSET                                                 0XFD480184
+#undef PCIE_ATTRIB_ATTR_100_OFFSET 
+#define PCIE_ATTRIB_ATTR_100_OFFSET                                                0XFD480190
+#undef PCIE_ATTRIB_ATTR_101_OFFSET 
+#define PCIE_ATTRIB_ATTR_101_OFFSET                                                0XFD480194
+#undef PCIE_ATTRIB_ATTR_37_OFFSET 
+#define PCIE_ATTRIB_ATTR_37_OFFSET                                                 0XFD480094
+#undef PCIE_ATTRIB_ATTR_93_OFFSET 
+#define PCIE_ATTRIB_ATTR_93_OFFSET                                                 0XFD480174
+#undef PCIE_ATTRIB_ID_OFFSET 
+#define PCIE_ATTRIB_ID_OFFSET                                                      0XFD480200
+#undef PCIE_ATTRIB_SUBSYS_ID_OFFSET 
+#define PCIE_ATTRIB_SUBSYS_ID_OFFSET                                               0XFD480204
+#undef PCIE_ATTRIB_REV_ID_OFFSET 
+#define PCIE_ATTRIB_REV_ID_OFFSET                                                  0XFD480208
+#undef PCIE_ATTRIB_ATTR_24_OFFSET 
+#define PCIE_ATTRIB_ATTR_24_OFFSET                                                 0XFD480060
+#undef PCIE_ATTRIB_ATTR_25_OFFSET 
+#define PCIE_ATTRIB_ATTR_25_OFFSET                                                 0XFD480064
+#undef PCIE_ATTRIB_ATTR_4_OFFSET 
+#define PCIE_ATTRIB_ATTR_4_OFFSET                                                  0XFD480010
+#undef PCIE_ATTRIB_ATTR_89_OFFSET 
+#define PCIE_ATTRIB_ATTR_89_OFFSET                                                 0XFD480164
+#undef PCIE_ATTRIB_ATTR_79_OFFSET 
+#define PCIE_ATTRIB_ATTR_79_OFFSET                                                 0XFD48013C
+#undef PCIE_ATTRIB_ATTR_43_OFFSET 
+#define PCIE_ATTRIB_ATTR_43_OFFSET                                                 0XFD4800AC
+
+/*USB 0 reset for control registers*/
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT                                   10
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK                                    0x00000400U
+
+/*This bit is used to choose between PIPE power present and 1'b1*/
+#undef USB3_0_FPD_POWER_PRSNT_OPTION_DEFVAL 
+#undef USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT 
+#undef USB3_0_FPD_POWER_PRSNT_OPTION_MASK 
+#define USB3_0_FPD_POWER_PRSNT_OPTION_DEFVAL                                       
+#define USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT                                        0
+#define USB3_0_FPD_POWER_PRSNT_OPTION_MASK                                         0x00000001U
+
+/*USB 0 sleep circuit reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL                                 0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT                                  8
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK                                   0x00000100U
+
+/*USB 0 reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT                                   6
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK                                    0x00000040U
+
+/*GEM 3 reset*/
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL                                     0x0000000F
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT                                      3
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK                                       0x00000008U
+
+/*Sata PM clock control select*/
+#undef SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_DEFVAL 
+#undef SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_SHIFT 
+#undef SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_MASK 
+#define SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_DEFVAL                                 
+#define SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_SHIFT                                  0
+#define SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_MASK                                   0x00000003U
+
+/*Sata block level reset*/
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT                                       1
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_MASK                                        0x00000002U
+
+/*PCIE config reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL                                  0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT                                   19
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK                                    0x00080000U
+
+/*PCIE control block level reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL                                 0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT                                  17
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK                                   0x00020000U
+
+/*PCIE bridge block level reset (AXI interface)*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL                               0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT                                18
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK                                 0x00040000U
+
+/*Display Port block level reset (includes DPDMA)*/
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT                                         16
+#define CRF_APB_RST_FPD_TOP_DP_RESET_MASK                                          0x00010000U
+
+/*Set to '1' to hold the GT in reset. Clear to release.*/
+#undef DP_DP_PHY_RESET_GT_RESET_DEFVAL 
+#undef DP_DP_PHY_RESET_GT_RESET_SHIFT 
+#undef DP_DP_PHY_RESET_GT_RESET_MASK 
+#define DP_DP_PHY_RESET_GT_RESET_DEFVAL                                            0x00010003
+#define DP_DP_PHY_RESET_GT_RESET_SHIFT                                             1
+#define DP_DP_PHY_RESET_GT_RESET_MASK                                              0x00000002U
+
+/*Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1*/
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK 
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL                                   0x00000000
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT                                    0
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK                                     0x0000000FU
+
+/*USB 2.0 Turnaround Time (USBTrdTim) Sets the turnaround time in PHY clocks. Specifies the response time for a MAC request to 
+		he Packet FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). The following are the required values for the minimum S
+		C bus frequency of 60 MHz. USB turnaround time is a critical certification criteria when using long cables and five hub level
+		. The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit
+		UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger 
+		alue. Note: This field is valid only in device mode.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_DEFVAL                                   0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT                                    10
+#define USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK                                     0x00003C00U
+
+/*Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio
+		 of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the
+		time when the Transceiver Select is set to 2'b00 (HS) to the time the TxValid is driven to 0 for sending the chirp-K. This de
+		ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power
+		off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur
+		ng hibernation. - This bit is valid only in device mode.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_DEFVAL                                     0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT                                      9
+#define USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK                                       0x00000200U
+
+/*Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen
+		_n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre
+		 to the external PHY. - 1'b1: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the external PHY. 
+		ote: This bit must be set high for Port0 if PHY is used. Note: In Device mode - Before issuing any device endpoint command wh
+		n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma
+		d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet
+		d.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_DEFVAL                                    0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT                                     8
+#define USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK                                      0x00000100U
+
+/*USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P
+		Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 
+		'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte
+		 in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i
+		 active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_DEFVAL                                      0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT                                       7
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK                                        0x00000080U
+
+/*Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co
+		figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app
+		ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F
+		r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s
+		t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati
+		g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi
+		 when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL                                0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT                                 6
+#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK                                  0x00000040U
+
+/*Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1
+		full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with 
+		ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U
+		B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_FSINTF_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_FSINTF_DEFVAL                                      0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT                                       5
+#define USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK                                        0x00000020U
+
+/*ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa
+		e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons
+		ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s
+		lected through DWC_USB3_HSPHY_INTERFACE.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_DEFVAL                               0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT                                4
+#define USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK                                 0x00000010U
+
+/*PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a
+		 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same 
+		lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen
+		 ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I
+		 any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz.*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYIF_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYIF_DEFVAL                                       0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT                                        3
+#define USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK                                         0x00000008U
+
+/*HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by
+		a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for 
+		dditional delays introduced by the PHY. This may be required, since the delay introduced by the PHY in generating the linesta
+		e condition may vary among PHYs. The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times.
+		The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit times. The application must program this 
+		ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH
+		 clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One
+		60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times*/
+#undef USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_DEFVAL 
+#undef USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT 
+#undef USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK 
+#define USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_DEFVAL                                     0x00000000
+#define USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT                                      0
+#define USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK                                       0x00000007U
+
+/*This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk. This register 
+		alue is used to adjust the ITP interval when GCTL[SOFITPSYNC] is set to '1'; SOF and ITP interval when GLADJ.GFLADJ_REFCLK_LP
+		_SEL is set to '1'. This field must be programmed to a non-zero value only if GFLADJ_REFCLK_LPM_SEL is set to '1' or GCTL.SOF
+		TPSYNC is set to '1'. The value is derived as follows: FLADJ_REF_CLK_FLADJ=((125000/ref_clk_period_integer)-(125000/ref_clk_p
+		riod)) * ref_clk_period where - the ref_clk_period_integer is the integer value of the ref_clk period got by truncating the d
+		cimal (fractional) value that is programmed in the GUCTL.REF_CLK_PERIOD field. - the ref_clk_period is the ref_clk period inc
+		uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ =
+		((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P
+		RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value)*/
+#undef USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_DEFVAL 
+#undef USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT 
+#undef USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK 
+#define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_DEFVAL                              0x00000000
+#define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT                               8
+#define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK                                0x003FFF00U
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L0_PLL_STATUS_READ_1_OFFSET                                         0XFD4023E4
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L1_PLL_STATUS_READ_1_OFFSET                                         0XFD4063E4
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L2_PLL_STATUS_READ_1_OFFSET                                         0XFD40A3E4
+
+/*Status Read value of PLL Lock*/
+#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 
+#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 
+#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 
+#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL                    0x00000001
+#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT                     4
+#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK                      0x00000010U
+#define SERDES_L3_PLL_STATUS_READ_1_OFFSET                                         0XFD40E3E4
+
+/*Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r
+		gister.; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK 
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL                  0x000009FF
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT                   14
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK                    0x00004000U
+
+/*If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root
+		ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_SHIFT 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_MASK 
+#define PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_DEFVAL              0x00000905
+#define PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_SHIFT               9
+#define PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_MASK                0x00000200U
+
+/*Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0x0004; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_7_ATTR_BAR0_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_7_ATTR_BAR0_SHIFT 
+#undef PCIE_ATTRIB_ATTR_7_ATTR_BAR0_MASK 
+#define PCIE_ATTRIB_ATTR_7_ATTR_BAR0_DEFVAL                                        
+#define PCIE_ATTRIB_ATTR_7_ATTR_BAR0_SHIFT                                         0
+#define PCIE_ATTRIB_ATTR_7_ATTR_BAR0_MASK                                          0x0000FFFFU
+
+/*Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
+		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
+		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
+		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
+		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
+		re size in bytes.; EP=0xFFF0; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_8_ATTR_BAR0_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_8_ATTR_BAR0_SHIFT 
+#undef PCIE_ATTRIB_ATTR_8_ATTR_BAR0_MASK 
+#define PCIE_ATTRIB_ATTR_8_ATTR_BAR0_DEFVAL                                        
+#define PCIE_ATTRIB_ATTR_8_ATTR_BAR0_SHIFT                                         0
+#define PCIE_ATTRIB_ATTR_8_ATTR_BAR0_MASK                                          0x0000FFFFU
+
+/*Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_9_ATTR_BAR1_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_9_ATTR_BAR1_SHIFT 
+#undef PCIE_ATTRIB_ATTR_9_ATTR_BAR1_MASK 
+#define PCIE_ATTRIB_ATTR_9_ATTR_BAR1_DEFVAL                                        
+#define PCIE_ATTRIB_ATTR_9_ATTR_BAR1_SHIFT                                         0
+#define PCIE_ATTRIB_ATTR_9_ATTR_BAR1_MASK                                          0x0000FFFFU
+
+/*Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
+		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
+		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
+		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
+		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
+		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
+		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_10_ATTR_BAR1_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_10_ATTR_BAR1_SHIFT 
+#undef PCIE_ATTRIB_ATTR_10_ATTR_BAR1_MASK 
+#define PCIE_ATTRIB_ATTR_10_ATTR_BAR1_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_10_ATTR_BAR1_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_10_ATTR_BAR1_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFFF*/
+#undef PCIE_ATTRIB_ATTR_11_ATTR_BAR2_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_11_ATTR_BAR2_SHIFT 
+#undef PCIE_ATTRIB_ATTR_11_ATTR_BAR2_MASK 
+#define PCIE_ATTRIB_ATTR_11_ATTR_BAR2_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_11_ATTR_BAR2_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_11_ATTR_BAR2_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
+		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0x00FF*/
+#undef PCIE_ATTRIB_ATTR_12_ATTR_BAR2_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_12_ATTR_BAR2_SHIFT 
+#undef PCIE_ATTRIB_ATTR_12_ATTR_BAR2_MASK 
+#define PCIE_ATTRIB_ATTR_12_ATTR_BAR2_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_12_ATTR_BAR2_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_12_ATTR_BAR2_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_13_ATTR_BAR3_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_13_ATTR_BAR3_SHIFT 
+#undef PCIE_ATTRIB_ATTR_13_ATTR_BAR3_MASK 
+#define PCIE_ATTRIB_ATTR_13_ATTR_BAR3_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_13_ATTR_BAR3_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_13_ATTR_BAR3_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
+		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
+		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
+		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
+		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
+		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
+		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
+		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFFF*/
+#undef PCIE_ATTRIB_ATTR_14_ATTR_BAR3_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_14_ATTR_BAR3_SHIFT 
+#undef PCIE_ATTRIB_ATTR_14_ATTR_BAR3_MASK 
+#define PCIE_ATTRIB_ATTR_14_ATTR_BAR3_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_14_ATTR_BAR3_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_14_ATTR_BAR3_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFF0*/
+#undef PCIE_ATTRIB_ATTR_15_ATTR_BAR4_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_15_ATTR_BAR4_SHIFT 
+#undef PCIE_ATTRIB_ATTR_15_ATTR_BAR4_MASK 
+#define PCIE_ATTRIB_ATTR_15_ATTR_BAR4_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_15_ATTR_BAR4_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_15_ATTR_BAR4_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
+		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
+		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
+		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
+		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
+		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
+		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0xFFF0*/
+#undef PCIE_ATTRIB_ATTR_16_ATTR_BAR4_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_16_ATTR_BAR4_SHIFT 
+#undef PCIE_ATTRIB_ATTR_16_ATTR_BAR4_MASK 
+#define PCIE_ATTRIB_ATTR_16_ATTR_BAR4_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_16_ATTR_BAR4_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_16_ATTR_BAR4_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1*/
+#undef PCIE_ATTRIB_ATTR_17_ATTR_BAR5_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_17_ATTR_BAR5_SHIFT 
+#undef PCIE_ATTRIB_ATTR_17_ATTR_BAR5_MASK 
+#define PCIE_ATTRIB_ATTR_17_ATTR_BAR5_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_17_ATTR_BAR5_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_17_ATTR_BAR5_MASK                                         0x0000FFFFU
+
+/*For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
+		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
+		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
+		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
+		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
+		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
+		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
+		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
+		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1*/
+#undef PCIE_ATTRIB_ATTR_18_ATTR_BAR5_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_18_ATTR_BAR5_SHIFT 
+#undef PCIE_ATTRIB_ATTR_18_ATTR_BAR5_MASK 
+#define PCIE_ATTRIB_ATTR_18_ATTR_BAR5_DEFVAL                                       
+#define PCIE_ATTRIB_ATTR_18_ATTR_BAR5_SHIFT                                        0
+#define PCIE_ATTRIB_ATTR_18_ATTR_BAR5_MASK                                         0x0000FFFFU
+
+/*Specifies maximum payload supported. Valid settings are: 0- 128 bytes, 1- 256 bytes, 2- 512 bytes, 3- 1024 bytes. Transferred
+		to the Device Capabilities register. The values: 4-2048 bytes, 5- 4096 bytes are not supported; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_SHIFT 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_MASK 
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_DEFVAL              0x00002138
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_SHIFT               8
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_MASK                0x00000700U
+
+/*Endpoint L1 Acceptable Latency. Records the latency that the endpoint can withstand on transitions from L1 state to L0 (if L1
+		state supported). Valid settings are: 0h less than 1us, 1h 1 to 2us, 2h 2 to 4us, 3h 4 to 8us, 4h 8 to 16us, 5h 16 to 32us, 6
+		 32 to 64us, 7h more than 64us. For Endpoints only. Must be 0h for other devices.; EP=0x0007; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_SHIFT 
+#undef PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_MASK 
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_DEFVAL                0x00002138
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_SHIFT                 3
+#define PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_MASK                  0x00000038U
+
+/*Identifies the type of device/port as follows: 0000b PCI Express Endpoint device, 0001b Legacy PCI Express Endpoint device, 0
+		00b Root Port of PCI Express Root Complex, 0101b Upstream Port of PCI Express Switch, 0110b Downstream Port of PCI Express Sw
+		tch, 0111b PCIE Express to PCI/PCI-X Bridge, 1000b PCI/PCI-X to PCI Express Bridge. Transferred to PCI Express Capabilities r
+		gister. Must be consistent with IS_SWITCH and UPSTREAM_FACING settings.; EP=0x0000; RP=0x0004*/
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_MASK 
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_DEFVAL                  0x00009C02
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_SHIFT                   4
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_MASK                    0x000000F0U
+
+/*PCIe Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capab
+		lity.; EP=0x009C; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_DEFVAL                           0x00009C02
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_SHIFT                            8
+#define PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_MASK                             0x0000FF00U
+
+/*Number of credits that should be advertised for Completion data received on Virtual Channel 0. The bytes advertised must be l
+		ss than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0172; RP=0x00CD*/
+#undef PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_SHIFT 
+#undef PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_MASK 
+#define PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_DEFVAL                      
+#define PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_MASK                        0x000007FFU
+
+/*Number of credits that should be advertised for Completion headers received on Virtual Channel 0. The sum of the posted, non 
+		osted, and completion header credits must be <= 80; EP=0x0048; RP=0x0024*/
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_MASK 
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_DEFVAL                      0x00000248
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_MASK                        0x0000007FU
+
+/*Number of credits that should be advertised for Non-Posted headers received on Virtual Channel 0. The number of non posted da
+		a credits advertised by the block is equal to the number of non posted header credits. The sum of the posted, non posted, and
+		completion header credits must be <= 80; EP=0x0004; RP=0x000C*/
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_MASK 
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_DEFVAL                     0x00000248
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_SHIFT                      7
+#define PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_MASK                       0x00003F80U
+
+/*Number of credits that should be advertised for Non-Posted data received on Virtual Channel 0. The number of non posted data 
+		redits advertised by the block is equal to two times the number of non posted header credits if atomic operations are support
+		d or is equal to the number of non posted header credits if atomic operations are not supported. The bytes advertised must be
+		less than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0008; RP=0x0018*/
+#undef PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_SHIFT 
+#undef PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_MASK 
+#define PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_DEFVAL                     
+#define PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_SHIFT                      0
+#define PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_MASK                       0x000007FFU
+
+/*Number of credits that should be advertised for Posted data received on Virtual Channel 0. The bytes advertised must be less 
+		han or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0020; RP=0x00B5*/
+#undef PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_SHIFT 
+#undef PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_MASK 
+#define PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_DEFVAL                      
+#define PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_MASK                        0x000007FFU
+
+/*Not currently in use. Invert ECRC generated by block when trn_tecrc_gen_n and trn_terrfwd_n are asserted.; EP=0x0000; RP=0x00
+		0*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_DEFVAL                              0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_SHIFT                               15
+#define PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_MASK                                0x00008000U
+
+/*Enables td bit clear and ECRC trim on received TLP's FALSE == don't trim TRUE == trim.; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_DEFVAL                            0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_SHIFT                             14
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_MASK                              0x00004000U
+
+/*Enables ECRC check on received TLP's 0 == don't check 1 == always check 3 == check if enabled by ECRC check enable bit of AER
+		cap structure; EP=0x0003; RP=0x0003*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_DEFVAL                                 0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_SHIFT                                  12
+#define PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_MASK                                   0x00003000U
+
+/*Index of last packet buffer used by TX TLM (i.e. number of buffers - 1). Calculated from max payload size supported and the n
+		mber of brams configured for transmit; EP=0x001C; RP=0x001C*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_DEFVAL                         0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_SHIFT                          7
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_MASK                           0x00000F80U
+
+/*Number of credits that should be advertised for Posted headers received on Virtual Channel 0. The sum of the posted, non post
+		d, and completion header credits must be <= 80; EP=0x0004; RP=0x0020*/
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_MASK 
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_DEFVAL                      0x00007E04
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_SHIFT                       0
+#define PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_MASK                        0x0000007FU
+
+/*Specifies values to be transferred to Header Type register. Bit 7 should be set to '0' indicating single-function device. Bit
+		0 identifies header as Type 0 or Type 1, with '0' indicating a Type 0 header.; EP=0x0000; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_MASK 
+#define PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_DEFVAL                                0x00000100
+#define PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_SHIFT                                 0
+#define PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_MASK                                  0x000000FFU
+
+/*PM Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabil
+		ty.; EP=0x0048; RP=0x0060*/
+#undef PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_DEFVAL                             0x00003D48
+#define PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_SHIFT                              0
+#define PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_MASK                               0x000000FFU
+
+/*MSI Per-Vector Masking Capable. The value is transferred to the MSI Control Register[8]. When set, adds Mask and Pending Dwor
+		 to Cap structure; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_DEFVAL         0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_SHIFT          9
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_MASK           0x00000200U
+
+/*Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL                                 0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT                                  8
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK                                   0x00000100U
+
+/*MSI Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabi
+		ity.; EP=0x0060; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_DEFVAL                            0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_SHIFT                             0
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_MASK                              0x000000FFU
+
+/*Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
+		he management port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_DEFVAL                                 0x00000160
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT                                  8
+#define PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK                                   0x00000100U
+
+/*Maximum Link Width. Valid settings are: 000001b x1, 000010b x2, 000100b x4, 001000b x8.; EP=0x0004; RP=0x0004*/
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_MASK 
+#define PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_DEFVAL                    0x00000104
+#define PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_SHIFT                     0
+#define PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_MASK                      0x0000003FU
+
+/*Used by LTSSM to set Maximum Link Width. Valid settings are: 000001b [x1], 000010b [x2], 000100b [x4], 001000b [x8].; EP=0x00
+		4; RP=0x0004*/
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_SHIFT 
+#undef PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_MASK 
+#define PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_DEFVAL                       0x00000104
+#define PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_SHIFT                        6
+#define PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_MASK                         0x00000FC0U
+
+/*TRUE specifies upstream-facing port. FALSE specifies downstream-facing port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_SHIFT 
+#undef PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_MASK 
+#define PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_DEFVAL                           0x000000F0
+#define PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_SHIFT                            6
+#define PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_MASK                             0x00000040U
+
+/*Enable the routing of message TLPs to the user through the TRN RX interface. A bit value of 1 enables routing of the message 
+		LP to the user. Messages are always decoded by the message decoder. Bit 0 - ERR COR, Bit 1 - ERR NONFATAL, Bit 2 - ERR FATAL,
+		Bit 3 - INTA Bit 4 - INTB, Bit 5 - INTC, Bit 6 - INTD, Bit 7 PM_PME, Bit 8 - PME_TO_ACK, Bit 9 - unlock, Bit 10 PME_Turn_Off;
+		EP=0x0000; RP=0x07FF*/
+#undef PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_MASK 
+#define PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_DEFVAL                          0x00000000
+#define PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_SHIFT                           5
+#define PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_MASK                            0x0000FFE0U
+
+/*Disable BAR filtering. Does not change the behavior of the bar hit outputs; EP=0x0000; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_SHIFT 
+#undef PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_MASK 
+#define PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_DEFVAL                     0x00000000
+#define PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_SHIFT                      1
+#define PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_MASK                       0x00000002U
+
+/*Link Bandwidth notification capability. Indicates support for the link bandwidth notification status and interrupt mechanism.
+		Required for Root.; EP=0x0000; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT 
+#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK 
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_DEFVAL   0x000009FF
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT    9
+#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK     0x00000200U
+
+/*Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L
+		_REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_SHIFT 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_MASK 
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_DEFVAL                       0x00000000
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_SHIFT                        15
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_MASK                         0x00008000U
+
+/*Sets a user-defined timeout for the Replay Timer to force cause the retransmission of unacknowledged TLPs; refer to LL_REPLAY
+		TIMEOUT_EN and LL_REPLAY_TIMEOUT_FUNC to see how this value is used. The unit for this attribute is in symbol times, which is
+		4ns at GEN1 speeds and 2ns at GEN2.; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_SHIFT 
+#undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_MASK 
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_DEFVAL                          0x00000000
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_SHIFT                           0
+#define PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_MASK                            0x00007FFFU
+
+/*Device ID for the the PCIe Cap Structure Device ID field*/
+#undef PCIE_ATTRIB_ID_CFG_DEV_ID_DEFVAL 
+#undef PCIE_ATTRIB_ID_CFG_DEV_ID_SHIFT 
+#undef PCIE_ATTRIB_ID_CFG_DEV_ID_MASK 
+#define PCIE_ATTRIB_ID_CFG_DEV_ID_DEFVAL                                           0x10EE7024
+#define PCIE_ATTRIB_ID_CFG_DEV_ID_SHIFT                                            0
+#define PCIE_ATTRIB_ID_CFG_DEV_ID_MASK                                             0x0000FFFFU
+
+/*Vendor ID for the PCIe Cap Structure Vendor ID field*/
+#undef PCIE_ATTRIB_ID_CFG_VEND_ID_DEFVAL 
+#undef PCIE_ATTRIB_ID_CFG_VEND_ID_SHIFT 
+#undef PCIE_ATTRIB_ID_CFG_VEND_ID_MASK 
+#define PCIE_ATTRIB_ID_CFG_VEND_ID_DEFVAL                                          0x10EE7024
+#define PCIE_ATTRIB_ID_CFG_VEND_ID_SHIFT                                           16
+#define PCIE_ATTRIB_ID_CFG_VEND_ID_MASK                                            0xFFFF0000U
+
+/*Subsystem ID for the the PCIe Cap Structure Subsystem ID field*/
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_DEFVAL 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_SHIFT 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_MASK 
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_DEFVAL                                 0x10EE0007
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_SHIFT                                  0
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_MASK                                   0x0000FFFFU
+
+/*Subsystem Vendor ID for the PCIe Cap Structure Subsystem Vendor ID field*/
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_DEFVAL 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_SHIFT 
+#undef PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_MASK 
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_DEFVAL                            0x10EE0007
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_SHIFT                             16
+#define PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_MASK                              0xFFFF0000U
+
+/*Revision ID for the the PCIe Cap Structure*/
+#undef PCIE_ATTRIB_REV_ID_CFG_REV_ID_DEFVAL 
+#undef PCIE_ATTRIB_REV_ID_CFG_REV_ID_SHIFT 
+#undef PCIE_ATTRIB_REV_ID_CFG_REV_ID_MASK 
+#define PCIE_ATTRIB_REV_ID_CFG_REV_ID_DEFVAL                                       
+#define PCIE_ATTRIB_REV_ID_CFG_REV_ID_SHIFT                                        0
+#define PCIE_ATTRIB_REV_ID_CFG_REV_ID_MASK                                         0x000000FFU
+
+/*Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		8000; RP=0x8000*/
+#undef PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_MASK 
+#define PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_DEFVAL                                 
+#define PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_SHIFT                                  0
+#define PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_MASK                                   0x0000FFFFU
+
+/*Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
+		0005; RP=0x0006*/
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_SHIFT 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_MASK 
+#define PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_DEFVAL                                 0x00000905
+#define PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_SHIFT                                  0
+#define PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_MASK                                   0x000000FFU
+
+/*INTX Interrupt Generation Capable. If FALSE, this will cause Command[10] to be hardwired to 0.; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_SHIFT 
+#undef PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_MASK 
+#define PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_DEFVAL                       0x00000905
+#define PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_SHIFT                        8
+#define PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_MASK                         0x00000100U
+
+/*Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL                                  0x00001000
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT                                   12
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK                                    0x00001000U
+
+/*Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
+		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
+		ges are sent if an error is detected).; EP=0x0001; RP=0x0001*/
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_DEFVAL                                  0x00001000
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT                                   12
+#define PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK                                    0x00001000U
+
+/*VSEC's Next Capability Offset pointer to the next item in the capabilities list, or 000h if this is the final capability.; EP
+		0x0140; RP=0x0140*/
+#undef PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_SHIFT 
+#undef PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_MASK 
+#define PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_DEFVAL                           0x00002281
+#define PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_SHIFT                            1
+#define PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_MASK                             0x00001FFEU
+
+/*CRS SW Visibility. Indicates RC can return CRS to SW. Transferred to the Root Capabilities register.; EP=0x0000; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_SHIFT 
+#undef PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_MASK 
+#define PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_DEFVAL                 0x00000000
+#define PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_SHIFT                  5
+#define PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_MASK                   0x00000020U
+
+/*Indicates that the MSIX structures exists. If this is FALSE, then the MSIX structure cannot be accessed via either the link o
+		 the management port.; EP=0x0001; RP=0x0000*/
+#undef PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_DEFVAL 
+#undef PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT 
+#undef PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK 
+#define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_DEFVAL                                0x00000100
+#define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT                                 8
+#define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK                                  0x00000100U
+#undef CRL_APB_RST_LPD_TOP_OFFSET 
+#define CRL_APB_RST_LPD_TOP_OFFSET                                                 0XFF5E023C
+#undef CRL_APB_RST_LPD_IOU0_OFFSET 
+#define CRL_APB_RST_LPD_IOU0_OFFSET                                                0XFF5E0230
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+#undef DP_DP_TX_PHY_POWER_DOWN_OFFSET 
+#define DP_DP_TX_PHY_POWER_DOWN_OFFSET                                             0XFD4A0238
+#undef DP_DP_PHY_RESET_OFFSET 
+#define DP_DP_PHY_RESET_OFFSET                                                     0XFD4A0200
+#undef CRF_APB_RST_FPD_TOP_OFFSET 
+#define CRF_APB_RST_FPD_TOP_OFFSET                                                 0XFD1A0100
+
+/*USB 0 reset for control registers*/
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT                                   10
+#define CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK                                    0x00000400U
+
+/*USB 0 sleep circuit reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL                                 0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT                                  8
+#define CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK                                   0x00000100U
+
+/*USB 0 reset*/
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT 
+#undef CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK 
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_DEFVAL                                  0x00188FDF
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT                                   6
+#define CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK                                    0x00000040U
+
+/*GEM 3 reset*/
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT 
+#undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK 
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL                                     0x0000000F
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT                                      3
+#define CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK                                       0x00000008U
+
+/*Sata block level reset*/
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_SATA_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_DEFVAL                                      0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT                                       1
+#define CRF_APB_RST_FPD_TOP_SATA_RESET_MASK                                        0x00000002U
+
+/*PCIE config reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_DEFVAL                                  0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT                                   19
+#define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK                                    0x00080000U
+
+/*PCIE control block level reset*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL                                 0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT                                  17
+#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK                                   0x00020000U
+
+/*PCIE bridge block level reset (AXI interface)*/
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL                               0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT                                18
+#define CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK                                 0x00040000U
+
+/*Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
+		ane0 Bits [3:2] - lane 1*/
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT 
+#undef DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK 
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_DEFVAL                                   0x00000000
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT                                    0
+#define DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK                                     0x0000000FU
+
+/*Set to '1' to hold the GT in reset. Clear to release.*/
+#undef DP_DP_PHY_RESET_GT_RESET_DEFVAL 
+#undef DP_DP_PHY_RESET_GT_RESET_SHIFT 
+#undef DP_DP_PHY_RESET_GT_RESET_MASK 
+#define DP_DP_PHY_RESET_GT_RESET_DEFVAL                                            0x00010003
+#define DP_DP_PHY_RESET_GT_RESET_SHIFT                                             1
+#define DP_DP_PHY_RESET_GT_RESET_MASK                                              0x00000002U
+
+/*Display Port block level reset (includes DPDMA)*/
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT 
+#undef CRF_APB_RST_FPD_TOP_DP_RESET_MASK 
+#define CRF_APB_RST_FPD_TOP_DP_RESET_DEFVAL                                        0x000F9FFE
+#define CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT                                         16
+#define CRF_APB_RST_FPD_TOP_DP_RESET_MASK                                          0x00010000U
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_OFFSET 
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_OFFSET                                         0XFFD80118
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_OFFSET 
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_OFFSET                                           0XFFD80120
+
+/*Power-up Request Interrupt Enable for PL*/
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_DEFVAL 
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_SHIFT 
+#undef PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_MASK 
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_DEFVAL                                      0x00000000
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_SHIFT                                       23
+#define PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_MASK                                        0x00800000U
+
+/*Power-up Request Trigger for PL*/
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_PL_DEFVAL 
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_PL_SHIFT 
+#undef PMU_GLOBAL_REQ_PWRUP_TRIG_PL_MASK 
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_PL_DEFVAL                                        0x00000000
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_PL_SHIFT                                         23
+#define PMU_GLOBAL_REQ_PWRUP_TRIG_PL_MASK                                          0x00800000U
+
+/*Power-up Request Status for PL*/
+#undef PMU_GLOBAL_REQ_PWRUP_STATUS_PL_DEFVAL 
+#undef PMU_GLOBAL_REQ_PWRUP_STATUS_PL_SHIFT 
+#undef PMU_GLOBAL_REQ_PWRUP_STATUS_PL_MASK 
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_PL_DEFVAL                                      0x00000000
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_PL_SHIFT                                       23
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_PL_MASK                                        0x00800000U
+#define PMU_GLOBAL_REQ_PWRUP_STATUS_OFFSET                                         0XFFD80110
+#undef GPIO_MASK_DATA_5_MSW_OFFSET 
+#define GPIO_MASK_DATA_5_MSW_OFFSET                                                0XFF0A002C
+#undef GPIO_DIRM_5_OFFSET 
+#define GPIO_DIRM_5_OFFSET                                                         0XFF0A0344
+#undef GPIO_OEN_5_OFFSET 
+#define GPIO_OEN_5_OFFSET                                                          0XFF0A0348
+#undef GPIO_DATA_5_OFFSET 
+#define GPIO_DATA_5_OFFSET                                                         0XFF0A0054
+#undef GPIO_DATA_5_OFFSET 
+#define GPIO_DATA_5_OFFSET                                                         0XFF0A0054
+#undef GPIO_DATA_5_OFFSET 
+#define GPIO_DATA_5_OFFSET                                                         0XFF0A0054
+
+/*Operation is the same as MASK_DATA_0_LSW[MASK_0_LSW]*/
+#undef GPIO_MASK_DATA_5_MSW_MASK_5_MSW_DEFVAL 
+#undef GPIO_MASK_DATA_5_MSW_MASK_5_MSW_SHIFT 
+#undef GPIO_MASK_DATA_5_MSW_MASK_5_MSW_MASK 
+#define GPIO_MASK_DATA_5_MSW_MASK_5_MSW_DEFVAL                                     0x00000000
+#define GPIO_MASK_DATA_5_MSW_MASK_5_MSW_SHIFT                                      16
+#define GPIO_MASK_DATA_5_MSW_MASK_5_MSW_MASK                                       0xFFFF0000U
+
+/*Operation is the same as DIRM_0[DIRECTION_0]*/
+#undef GPIO_DIRM_5_DIRECTION_5_DEFVAL 
+#undef GPIO_DIRM_5_DIRECTION_5_SHIFT 
+#undef GPIO_DIRM_5_DIRECTION_5_MASK 
+#define GPIO_DIRM_5_DIRECTION_5_DEFVAL                                             
+#define GPIO_DIRM_5_DIRECTION_5_SHIFT                                              0
+#define GPIO_DIRM_5_DIRECTION_5_MASK                                               0xFFFFFFFFU
+
+/*Operation is the same as OEN_0[OP_ENABLE_0]*/
+#undef GPIO_OEN_5_OP_ENABLE_5_DEFVAL 
+#undef GPIO_OEN_5_OP_ENABLE_5_SHIFT 
+#undef GPIO_OEN_5_OP_ENABLE_5_MASK 
+#define GPIO_OEN_5_OP_ENABLE_5_DEFVAL                                              
+#define GPIO_OEN_5_OP_ENABLE_5_SHIFT                                               0
+#define GPIO_OEN_5_OP_ENABLE_5_MASK                                                0xFFFFFFFFU
+
+/*Output Data*/
+#undef GPIO_DATA_5_DATA_5_DEFVAL 
+#undef GPIO_DATA_5_DATA_5_SHIFT 
+#undef GPIO_DATA_5_DATA_5_MASK 
+#define GPIO_DATA_5_DATA_5_DEFVAL                                                  
+#define GPIO_DATA_5_DATA_5_SHIFT                                                   0
+#define GPIO_DATA_5_DATA_5_MASK                                                    0xFFFFFFFFU
+
+/*Output Data*/
+#undef GPIO_DATA_5_DATA_5_DEFVAL 
+#undef GPIO_DATA_5_DATA_5_SHIFT 
+#undef GPIO_DATA_5_DATA_5_MASK 
+#define GPIO_DATA_5_DATA_5_DEFVAL                                                  
+#define GPIO_DATA_5_DATA_5_SHIFT                                                   0
+#define GPIO_DATA_5_DATA_5_MASK                                                    0xFFFFFFFFU
+
+/*Output Data*/
+#undef GPIO_DATA_5_DATA_5_DEFVAL 
+#undef GPIO_DATA_5_DATA_5_SHIFT 
+#undef GPIO_DATA_5_DATA_5_MASK 
+#define GPIO_DATA_5_DATA_5_DEFVAL                                                  
+#define GPIO_DATA_5_DATA_5_SHIFT                                                   0
+#define GPIO_DATA_5_DATA_5_MASK                                                    0xFFFFFFFFU
+#ifdef __cplusplus
+extern "C" {
+#endif
+ int psu_init (); 
+ unsigned long psu_ps_pl_isolation_removal_data(); 
+ unsigned long psu_ps_pl_reset_config_data(); 
+#ifdef __cplusplus
+}
+#endif
diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/system.hdf b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/system.hdf
new file mode 100644
index 000000000..be53aba19
Binary files /dev/null and b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/system.hdf differ
diff --git a/FreeRTOS/Demo/Common/Minimal/AbortDelay.c b/FreeRTOS/Demo/Common/Minimal/AbortDelay.c
index 349c1cb58..d32d31dc8 100644
--- a/FreeRTOS/Demo/Common/Minimal/AbortDelay.c
+++ b/FreeRTOS/Demo/Common/Minimal/AbortDelay.c
@@ -237,6 +237,7 @@ static void prvBlockingTask( void *pvParameters )
 {
 TaskHandle_t xControllingTask;
 uint32_t ulNotificationValue;
+const uint32_t ulMax = 0xffffffffUL;
 
 	/* Just to remove compiler warnings. */
 	( void ) pvParameters;
@@ -247,7 +248,7 @@ uint32_t ulNotificationValue;
 	for( ;; )
 	{
 		/* Wait to be notified of the test that is to be performed next. */
-		xTaskNotifyWait( 0, ULONG_MAX, &ulNotificationValue, portMAX_DELAY );
+		xTaskNotifyWait( 0, ulMax, &ulNotificationValue, portMAX_DELAY );
 
 		switch( ulNotificationValue )
 		{
diff --git a/FreeRTOS/Demo/Common/Minimal/StaticAllocation.c b/FreeRTOS/Demo/Common/Minimal/StaticAllocation.c
index d4e8f6d7b..0c3a2b69d 100644
--- a/FreeRTOS/Demo/Common/Minimal/StaticAllocation.c
+++ b/FreeRTOS/Demo/Common/Minimal/StaticAllocation.c
@@ -253,9 +253,6 @@ void vStartStaticallyAllocatedTasks( void  )
 					   staticTASK_PRIORITY,					/* Priority of the task. */
 					   &( uxCreatorTaskStackBuffer[ 0 ] ),  /* The buffer to use as the task's stack. */
 					   &xCreatorTaskTCBBuffer );			/* The variable that will hold the task's TCB. */
-
-	/* Pseudo seed the random number generator. */
-	ulNextRand = ( uint32_t ) prvRand;
 }
 /*-----------------------------------------------------------*/
 
diff --git a/FreeRTOS/Source/portable/GCC/ARM_CR5/port.c b/FreeRTOS/Source/portable/GCC/ARM_CR5/port.c
index bcbf34bac..34d29e7fa 100644
--- a/FreeRTOS/Source/portable/GCC/ARM_CR5/port.c
+++ b/FreeRTOS/Source/portable/GCC/ARM_CR5/port.c
@@ -357,7 +357,7 @@ uint32_t ulAPSR, ulCycles = 8; /* 8 bits per byte. */
 
 		/* Sanity check configUNIQUE_INTERRUPT_PRIORITIES matches the read
 		value. */
-//		configASSERT( ucMaxPriorityValue == portLOWEST_INTERRUPT_PRIORITY );
+		configASSERT( ucMaxPriorityValue == portLOWEST_INTERRUPT_PRIORITY );
 
 		/* Restore the clobbered interrupt priority register to its original
 		value. */
diff --git a/FreeRTOS/Source/portable/GCC/ARM_CR5/portASM.S b/FreeRTOS/Source/portable/GCC/ARM_CR5/portASM.S
index 5f8f9fc20..5d3a37760 100644
--- a/FreeRTOS/Source/portable/GCC/ARM_CR5/portASM.S
+++ b/FreeRTOS/Source/portable/GCC/ARM_CR5/portASM.S
@@ -91,10 +91,6 @@
 	.global FreeRTOS_IRQ_Handler
 	.global FreeRTOS_SWI_Handler
 	.global vPortRestoreTaskContext
-	.global vPortInstallFreeRTOSVectorTable
-
-
-
 
 .macro portSAVE_CONTEXT
 
diff --git a/FreeRTOS/Source/portable/MemMang/heap_4.c b/FreeRTOS/Source/portable/MemMang/heap_4.c
index f7e3f01a2..019d851e4 100644
--- a/FreeRTOS/Source/portable/MemMang/heap_4.c
+++ b/FreeRTOS/Source/portable/MemMang/heap_4.c
@@ -297,7 +297,7 @@ void *pvReturn = NULL;
 	}
 	#endif
 
-	configASSERT( ( ( ( uint32_t ) pvReturn ) & portBYTE_ALIGNMENT_MASK ) == 0 );
+	configASSERT( ( ( ( size_t ) pvReturn ) & ( size_t ) portBYTE_ALIGNMENT_MASK ) == 0 );
 	return pvReturn;
 }
 /*-----------------------------------------------------------*/