From: Guenter Roeck Date: Mon, 12 Mar 2012 01:56:25 +0000 (-0700) Subject: rework temperature display X-Git-Tag: nct6775-v0.9~62 X-Git-Url: https://git.sur5r.net/?p=groeck-nct6775;a=commitdiff_plain;h=3305e3a421f817bf0e5764d4c4f09d8fe832a7fa rework temperature display temp[1..6] now always display SMIOVT[1..6] monitoring sources. temp[7..11] displays fan control temperature sources. Signed-off-by: Guenter Roeck --- diff --git a/nct6775.c b/nct6775.c index 7161fad..fb35487 100644 --- a/nct6775.c +++ b/nct6775.c @@ -202,10 +202,10 @@ static const u16 NCT6775_REG_FAN_STEP_UP_TIME[] = { 0x104, 0x204, 0x304, 0x804, 0x904 }; static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { 0x105, 0x205, 0x305, 0x805, 0x905 }; -static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { - 0x106, 0x206, 0x306, 0x806, 0x906 }; -static const u16 NCT6775_REG_FAN_STOP_TIME[] = { - 0x107, 0x207, 0x307, 0x807, 0x907 }; +static const u16 NCT6775_REG_FAN_START_OUTPUT[] + = { 0x106, 0x206, 0x306, 0x806, 0x906 }; +static const u16 NCT6775_REG_FAN_STOP_TIME[] + = { 0x107, 0x207, 0x307, 0x807, 0x907 }; static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309, 0x809, 0x909 }; static const u16 NCT6775_REG_PWM_READ[] = { 0x01, 0x03, 0x11, 0x13, 0x15 }; @@ -213,38 +213,31 @@ static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 }; static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642}; -static const u16 NCT6779_REG_TOLERANCE_H[] = { - 0x10c, 0x20c, 0x30c, 0x40c, 0x50c }; +static const u16 NCT6779_REG_TOLERANCE_H[] + = { 0x10c, 0x20c, 0x30c, 0x40c, 0x50c }; static const u16 NCT6779_REG_FAN[] = { 0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8 }; -static const u16 NCT6775_REG_TEMP[] - = { 0x27, 0x150, 0x250, 0x73, 0x75, 0x77, 0x62b, 0x62c, 0x62d }; -static const u16 NCT6775_REG_TEMP_CONFIG[] - = { 0, 0x152, 0x252, 0, 0, 0, 0x628, 0x629, 0x62A }; -static const u16 NCT6775_REG_TEMP_HYST[] - = { 0x3a, 0x153, 0x253, 0, 0, 0, 0x673, 0x678, 0x67D }; -static const u16 NCT6775_REG_TEMP_OVER[] - = { 0x39, 0x155, 0x255, 0, 0, 0, 0x672, 0x677, 0x67C }; -static const u16 NCT6775_REG_TEMP_SOURCE[] - = { 0x621, 0x622, 0x623, 0x100, 0x200, 0x300, 0x624, 0x625, 0x626 }; - -static const u16 NCT6776_REG_TEMP_CONFIG[] - = { 0x18, 0x152, 0x252, 0, 0, 0, 0x628, 0x629, 0x62A }; - -static const u16 NCT6779_REG_TEMP[] - = { 0x27, 0x150, 0x73, 0x75, 0x77, 0x79, 0x7b }; -static const u16 NCT6779_REG_TEMP_CONFIG[] - = { 0x18, 0x152, 0, 0, 0, 0, 0 }; -static const u16 NCT6779_REG_TEMP_SOURCE[] - = { 0x621, 0x622, 0x100, 0x200, 0x300, 0x800, 0x900 }; -static const u16 NCT6779_REG_TEMP_HYST[] - = { 0x3a, 0x153, 0, 0, 0, 0, 0, 0, 0 }; -static const u16 NCT6779_REG_TEMP_OVER[] - = { 0x39, 0x155, 0, 0, 0, 0, 0, 0, 0 }; - -static const u16 NCT6775_REG_AUTO_BASE[] = { - 0x100, 0x200, 0x300, 0x800, 0x900 }; +static const u16 NCT6775_REG_TEMP[11] + = { 0x27, 0x150, 0x250, 0x62b, 0x62c, 0x62d, 0x73, 0x75, 0x77 }; +static const u16 NCT6775_REG_TEMP_CONFIG[11] + = { 0, 0x152, 0x252, 0x628, 0x629, 0x62A }; +static const u16 NCT6775_REG_TEMP_HYST[11] + = { 0x3a, 0x153, 0x253, 0x673, 0x678, 0x67D }; +static const u16 NCT6775_REG_TEMP_OVER[11] + = { 0x39, 0x155, 0x255, 0x672, 0x677, 0x67C }; +static const u16 NCT6775_REG_TEMP_SOURCE[11] + = { 0x621, 0x622, 0x623, 0x624, 0x625, 0x626, 0x100, 0x200, 0x300, + 0x800, 0x900 }; + +static const u16 NCT6776_REG_TEMP_CONFIG[11] + = { 0x18, 0x152, 0x252, 0x628, 0x629, 0x62A }; + +static const u16 NCT6779_REG_TEMP[11] + = { 0x27, 0x150, 0, 0, 0, 0, 0x73, 0x75, 0x77, 0x79, 0x7b }; + +static const u16 NCT6775_REG_AUTO_BASE[] + = { 0x100, 0x200, 0x300, 0x800, 0x900 }; #define NCT6775_REG_AUTO_TEMP(nr, p) (NCT6775_REG_AUTO_BASE[nr] + 0x21 + (p)) #define NCT6775_REG_AUTO_PWM(nr, p) (NCT6775_REG_AUTO_BASE[nr] + 0x27 + (p)) @@ -1380,6 +1373,8 @@ static struct sensor_device_attribute sda_temp_input[] = { SENSOR_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6), SENSOR_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7), SENSOR_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8), + SENSOR_ATTR(temp10_input, S_IRUGO, show_temp, NULL, 9), + SENSOR_ATTR(temp11_input, S_IRUGO, show_temp, NULL, 10), }; static struct sensor_device_attribute sda_temp_label[] = { @@ -1389,9 +1384,6 @@ static struct sensor_device_attribute sda_temp_label[] = { SENSOR_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3), SENSOR_ATTR(temp5_label, S_IRUGO, show_temp_label, NULL, 4), SENSOR_ATTR(temp6_label, S_IRUGO, show_temp_label, NULL, 5), - SENSOR_ATTR(temp7_label, S_IRUGO, show_temp_label, NULL, 6), - SENSOR_ATTR(temp8_label, S_IRUGO, show_temp_label, NULL, 7), - SENSOR_ATTR(temp9_label, S_IRUGO, show_temp_label, NULL, 8), }; static struct sensor_device_attribute sda_temp_max[] = { @@ -1407,12 +1399,6 @@ static struct sensor_device_attribute sda_temp_max[] = { store_temp_max, 4), SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 5), - SENSOR_ATTR(temp7_max, S_IRUGO | S_IWUSR, show_temp_max, - store_temp_max, 6), - SENSOR_ATTR(temp8_max, S_IRUGO | S_IWUSR, show_temp_max, - store_temp_max, 7), - SENSOR_ATTR(temp9_max, S_IRUGO | S_IWUSR, show_temp_max, - store_temp_max, 8), }; static struct sensor_device_attribute sda_temp_max_hyst[] = { @@ -1428,12 +1414,6 @@ static struct sensor_device_attribute sda_temp_max_hyst[] = { store_temp_max_hyst, 4), SENSOR_ATTR(temp6_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 5), - SENSOR_ATTR(temp7_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 6), - SENSOR_ATTR(temp8_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 7), - SENSOR_ATTR(temp9_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 8), }; static struct sensor_device_attribute sda_temp_alarm[] = { @@ -2370,6 +2350,8 @@ static void nct6775_device_remove_files(struct device *dev) if (!(data->have_temp & (1 << i))) continue; device_remove_file(dev, &sda_temp_input[i].dev_attr); + if (i > 5) + continue; device_remove_file(dev, &sda_temp_label[i].dev_attr); device_remove_file(dev, &sda_temp_max[i].dev_attr); device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr); @@ -2546,6 +2528,8 @@ static int __devinit nct6775_probe(struct platform_device *pdev) struct nct6775_data *data; struct resource *res; int i, err = 0; + int mask = 0; + const u16 *reg_temp, *reg_temp_config; res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!request_region(res->start, IOREGION_LENGTH, DRVNAME)) { @@ -2599,43 +2583,52 @@ static int __devinit nct6775_probe(struct platform_device *pdev) data->have_temp = 0; /* Deal with temperature register setup first. */ - if (sio_data->kind == nct6775 || sio_data->kind == nct6776) { - int mask = 0; + switch(sio_data->kind == nct6775) { + case nct6775: + reg_temp = NCT6775_REG_TEMP; + reg_temp_config = NCT6775_REG_TEMP_CONFIG; + case nct6776: + reg_temp = NCT6775_REG_TEMP; + reg_temp_config = NCT6776_REG_TEMP_CONFIG; + break; + case nct6779: + reg_temp = NCT6779_REG_TEMP; + reg_temp_config = NCT6776_REG_TEMP_CONFIG; + break; + } - /* - * Display temperature sensor output only if it monitors - * a source other than one already reported. Always display - * first three temperature registers, though. - */ - for (i = 0; i < NUM_REG_TEMP; i++) { - u8 src; - - data->reg_temp[i] = NCT6775_REG_TEMP[i]; - data->reg_temp_over[i] = NCT6775_REG_TEMP_OVER[i]; - data->reg_temp_hyst[i] = NCT6775_REG_TEMP_HYST[i]; - if (sio_data->kind == nct6775) - data->reg_temp_config[i] - = NCT6775_REG_TEMP_CONFIG[i]; - else - data->reg_temp_config[i] - = NCT6776_REG_TEMP_CONFIG[i]; - - src = nct6775_read_value(data, - NCT6775_REG_TEMP_SOURCE[i]); - src &= 0x1f; - if (src && !(mask & (1 << src))) { - data->have_temp |= 1 << i; - mask |= 1 << src; - } + for (i = 0; i < NUM_REG_TEMP; i++) { + u8 src; + + if (reg_temp[i] == 0) + continue; + + data->reg_temp[i] = reg_temp[i]; + data->reg_temp_over[i] = NCT6775_REG_TEMP_OVER[i]; + data->reg_temp_hyst[i] = NCT6775_REG_TEMP_HYST[i]; + data->reg_temp_config[i] = reg_temp_config[i]; + + src = nct6775_read_value(data, NCT6775_REG_TEMP_SOURCE[i]); + src &= 0x1f; + + /* Always display temp6..10 (fan control sources) if enabled */ + if (src && (i > 5 || !(mask & (1 << src)))) { + data->have_temp |= 1 << i; + mask |= 1 << src; + } - data->temp_src[i] = src; + data->temp_src[i] = src; + if (i < 6) { /* - * Now do some register swapping if index 0..2 don't + * Do some register swapping if index 0..2 don't * point to SYSTIN(1), CPUIN(2), and AUXIN(3). * Idea is to have the first three attributes * report SYSTIN, CPUIN, and AUXIN if possible * without overriding the basic system configuration. + * Do this only for the first six temperature sources; + * the remaining temperatures are fan control sources, + * and we don't want to touch those. */ if (i > 0 && data->temp_src[0] != 1 && data->temp_src[i] == 1) @@ -2647,79 +2640,38 @@ static int __devinit nct6775_probe(struct platform_device *pdev) && data->temp_src[i] == 3) w82627ehf_swap_tempreg(data, 2, i); } - if (sio_data->kind == nct6776) { - /* - * On NCT6776, AUXTIN and VIN3 pins are shared. - * Only way to detect it is to check if AUXTIN is used - * as a temperature source, and if that source is - * enabled. - * - * If that is the case, disable in6, which reports VIN3. - * Otherwise disable temp3. - */ - if (data->temp_src[2] == 3) { - u8 reg; - - if (data->reg_temp_config[2]) - reg = nct6775_read_value(data, - data->reg_temp_config[2]); - else - reg = 0; /* Assume AUXTIN is used */ - - if (reg & 0x01) - data->have_temp &= ~(1 << 2); - else - data->have_in &= ~(1 << 6); - } - data->temp_label = nct6776_temp_label; - } else { - data->temp_label = nct6775_temp_label; - } - } else if (sio_data->kind == nct6779) { - int mask = 0; + } + switch (sio_data->kind) { + case nct6775: + data->temp_label = nct6775_temp_label; + break; + case nct6776: /* - * Display temperature sensor output only if it monitors - * a source other than one already reported. Always display - * first three temperature registers, though. + * On NCT6776, AUXTIN and VIN3 pins are shared. + * Only way to detect it is to check if AUXTIN is used + * as a temperature source, and if that source is + * enabled. + * + * If that is the case, disable in6, which reports VIN3. + * Otherwise disable temp3. */ - for (i = 0; i < ARRAY_SIZE(NCT6779_REG_TEMP); i++) { - u8 src; - - data->reg_temp[i] = NCT6779_REG_TEMP[i]; - data->reg_temp_over[i] = NCT6779_REG_TEMP_OVER[i]; - data->reg_temp_hyst[i] = NCT6779_REG_TEMP_HYST[i]; - data->reg_temp_config[i] = NCT6779_REG_TEMP_CONFIG[i]; - - src = nct6775_read_value(data, - NCT6779_REG_TEMP_SOURCE[i]); - src &= 0x1f; - if (src && !(mask & (1 << src))) { - data->have_temp |= 1 << i; - mask |= 1 << src; - } + if (data->temp_src[2] == 3) { + u8 reg; - data->temp_src[i] = src; + if (data->reg_temp_config[2]) + reg = nct6775_read_value(data, + data->reg_temp_config[2]); + else + reg = 0; /* Assume AUXTIN is used */ - /* - * Now do some register swapping if index 0..2 don't - * point to SYSTIN(1), CPUIN(2), and AUXIN(3). - * Idea is to have the first three attributes - * report SYSTIN, CPUIN, and AUXIN if possible - * without overriding the basic system configuration. - */ - if (i > 0 && data->temp_src[0] != 1 - && data->temp_src[i] == 1) - w82627ehf_swap_tempreg(data, 0, i); - if (i > 1 && data->temp_src[1] != 2 - && data->temp_src[i] == 2) - w82627ehf_swap_tempreg(data, 1, i); - if (i > 2 && data->temp_src[2] != 3 - && data->temp_src[i] == 3) - w82627ehf_swap_tempreg(data, 2, i); + if (reg & 0x01) + data->have_temp &= ~(1 << 2); + else + data->have_in &= ~(1 << 6); } - data->temp_label = nct6779_temp_label; - + data->temp_label = nct6776_temp_label; + case nct6779: /* * Shared pins: * VIN4 / AUXTIN0 @@ -2741,6 +2693,8 @@ static int __devinit nct6775_probe(struct platform_device *pdev) if (data->temp_src[i] == 6) /* AUXTIN0 */ data->have_in &= ~(1 << 14); /* no VIN7 */ } + data->temp_label = nct6779_temp_label; + break; } if (sio_data->kind == nct6775) { @@ -2872,6 +2826,8 @@ static int __devinit nct6775_probe(struct platform_device *pdev) err = device_create_file(dev, &sda_temp_input[i].dev_attr); if (err) goto exit_remove; + if (i > 5) + continue; if (data->temp_label) { err = device_create_file(dev, &sda_temp_label[i].dev_attr);