IPC interface (interprocess communication)
==========================================
Michael Stapelberg <michael+i3@stapelberg.de>
-March 2010
+December 2011
-This document describes how to interface with i3 from a seperate process. This
+This document describes how to interface with i3 from a separate process. This
is useful for example to remote-control i3 (to write test cases for example) or
to get various information like the current workspaces to implement an external
workspace bar.
The method of choice for IPC in our case is a unix socket because it has very
little overhead on both sides and is usually available without headaches in
-most languages. In the default configuration file, no ipc-socket path is
-specified and thus no socket is created. The standard path (which +i3-msg+ and
-+i3-input+ use) is +~/.i3/ipc.sock+.
+most languages. In the default configuration file, the ipc-socket gets created
+in +/tmp/i3-%u.XXXXXX/ipc-socket.%p+ where +%u+ is your UNIX username, +%p+ is
+the PID of i3 and XXXXXX is a string of random characters from the portable
+filename character set (see mkdtemp(3)). You can get the socketpath from i3 by
+calling +i3 --get-socketpath+.
+
+All i3 utilities, like +i3-msg+ and +i3-input+ will read the +I3_SOCKET_PATH+
+X11 property, stored on the X11 root window.
== Establishing a connection
-------------------------------------------------------------
use IO::Socket::UNIX;
-my $sock = IO::Socket::UNIX->new(Peer => '~/.i3/ipc.sock');
+chomp(my $path = qx(i3 --get-socketpath));
+my $sock = IO::Socket::UNIX->new(Peer => $path);
-------------------------------------------------------------
== Sending messages to i3
COMMAND (0)::
The payload of the message is a command for i3 (like the commands you
can bind to keys in the configuration file) and will be executed
- directly after receiving it. There is no reply to this message.
+ directly after receiving it.
GET_WORKSPACES (1)::
Gets the current workspaces. The reply will be a JSON-encoded list of
workspaces (see the reply section).
GET_OUTPUTS (3)::
Gets the current outputs. The reply will be a JSON-encoded list of outputs
(see the reply section).
+GET_TREE (4)::
+ Gets the layout tree. i3 uses a tree as data structure which includes
+ every container. The reply will be the JSON-encoded tree (see the reply
+ section).
+GET_MARKS (5)::
+ Gets a list of marks (identifiers for containers to easily jump to them
+ later). The reply will be a JSON-encoded list of window marks (see
+ reply section).
+GET_BAR_CONFIG (6)::
+ Gets the configuration (as JSON map) of the workspace bar with the
+ given ID. If no ID is provided, an array with all configured bar IDs is
+ returned instead.
+GET_LOG_MARKERS (7)::
+ Gets the SHM log markers for the current position, the last wrap, the
+ SHM segment name and segment size. This is necessary for tools like
+ i3-dump-log which want to display the SHM log.
So, a typical message could look like this:
--------------------------------------------------
COMMAND (0)::
Confirmation/Error code for the COMMAND message.
-GET_WORKSPACES (1)::
+WORKSPACES (1)::
Reply to the GET_WORKSPACES message.
SUBSCRIBE (2)::
Confirmation/Error code for the SUBSCRIBE message.
-GET_OUTPUTS (3)::
+OUTPUTS (3)::
Reply to the GET_OUTPUTS message.
+TREE (4)::
+ Reply to the GET_TREE message.
+MARKS (5)::
+ Reply to the GET_MARKS message.
+BAR_CONFIG (6)::
+ Reply to the GET_BAR_CONFIG message.
+LOG_MARKERS (7)::
+ Reply to the GET_LOG_MARKERS message.
=== COMMAND reply
{ "success": true }
-------------------
-=== GET_WORKSPACES reply
+=== WORKSPACES reply
The reply consists of a serialized list of workspaces. Each workspace has the
following properties:
]
-------------------
+=== TREE reply
+
+The reply consists of a serialized tree. Each node in the tree (representing
+one container) has at least the properties listed below. While the nodes might
+have more properties, please do not use any properties which are not documented
+here. They are not yet finalized and will probably change!
+
+id (integer)::
+ The internal ID (actually a C pointer value) of this container. Do not
+ make any assumptions about it. You can use it to (re-)identify and
+ address containers when talking to i3.
+name (string)::
+ The internal name of this container. For all containers which are part
+ of the tree structure down to the workspace contents, this is set to a
+ nice human-readable name of the container.
+ For all other containers, the content is not defined (yet).
+border (string)::
+ Can be either "normal", "none" or "1pixel", dependending on the
+ container’s border style.
+layout (string)::
+ Can be either "default", "stacked", "tabbed", "dockarea" or "output".
+ Other values might be possible in the future, should we add new
+ layouts.
+orientation (string)::
+ Can be either "none" (for non-split containers), "horizontal" or
+ "vertical".
+percent (float)::
+ The percentage which this container takes in its parent. A value of
+ +null+ means that the percent property does not make sense for this
+ container, for example for the root container.
+rect (map)::
+ The absolute display coordinates for this container. Display
+ coordinates means that when you have two 1600x1200 monitors on a single
+ X11 Display (the standard way), the coordinates of the first window on
+ the second monitor are +{ "x": 1600, "y": 0, "width": 1600, "height":
+ 1200 }+.
+window_rect (map)::
+ The coordinates of the *actual client window* inside its container.
+ These coordinates are relative to the container and do not include the
+ window decoration (which is actually rendered on the parent container).
+ So, when using the +default+ layout, you will have a 2 pixel border on
+ each side, making the window_rect +{ "x": 2, "y": 0, "width": 632,
+ "height": 366 }+ (for example).
+geometry (map)::
+ The original geometry the window specified when i3 mapped it. Used when
+ switching a window to floating mode, for example.
+urgent (bool)::
+ Whether this container (window or workspace) has the urgency hint set.
+focused (bool)::
+ Whether this container is currently focused.
+
+Please note that in the following example, I have left out some keys/values
+which are not relevant for the type of the node. Otherwise, the example would
+be by far too long (it already is quite long, despite showing only 1 window and
+one dock window).
+
+It is useful to have an overview of the structure before taking a look at the
+JSON dump:
+
+* root
+** LVDS1
+*** topdock
+*** content
+**** workspace 1
+***** window 1
+*** bottomdock
+**** dock window 1
+** VGA1
+
+*Example:*
+-----------------------
+{
+ "id": 6875648,
+ "name": "root",
+ "rect": {
+ "x": 0,
+ "y": 0,
+ "width": 1280,
+ "height": 800
+ },
+ "nodes": [
+
+ {
+ "id": 6878320,
+ "name": "LVDS1",
+ "layout": "output",
+ "rect": {
+ "x": 0,
+ "y": 0,
+ "width": 1280,
+ "height": 800
+ },
+ "nodes": [
+
+ {
+ "id": 6878784,
+ "name": "topdock",
+ "layout": "dockarea",
+ "orientation": "vertical",
+ "rect": {
+ "x": 0,
+ "y": 0,
+ "width": 1280,
+ "height": 0
+ },
+ },
+
+ {
+ "id": 6879344,
+ "name": "content",
+ "rect": {
+ "x": 0,
+ "y": 0,
+ "width": 1280,
+ "height": 782
+ },
+ "nodes": [
+
+ {
+ "id": 6880464,
+ "name": "1",
+ "orientation": "horizontal",
+ "rect": {
+ "x": 0,
+ "y": 0,
+ "width": 1280,
+ "height": 782
+ },
+ "floating_nodes": [],
+ "nodes": [
+
+ {
+ "id": 6929968,
+ "name": "#aa0000",
+ "border": "normal",
+ "percent": 1,
+ "rect": {
+ "x": 0,
+ "y": 18,
+ "width": 1280,
+ "height": 782
+ }
+ }
+
+ ]
+ }
+
+ ]
+ },
+
+ {
+ "id": 6880208,
+ "name": "bottomdock",
+ "layout": "dockarea",
+ "orientation": "vertical",
+ "rect": {
+ "x": 0,
+ "y": 782,
+ "width": 1280,
+ "height": 18
+ },
+ "nodes": [
+
+ {
+ "id": 6931312,
+ "name": "#00aa00",
+ "percent": 1,
+ "rect": {
+ "x": 0,
+ "y": 782,
+ "width": 1280,
+ "height": 18
+ }
+ }
+
+ ]
+ }
+ ]
+ }
+ ]
+}
+------------------------
+
+=== MARKS reply
+
+The reply consists of a single array of strings for each container that has a
+mark. The order of that array is undefined. If more than one container has the
+same mark, it will be represented multiple times in the reply (the array
+contents are not unique).
+
+If no window has a mark the response will be the empty array [].
+
+=== BAR_CONFIG reply
+
+This can be used by third-party workspace bars (especially i3bar, but others
+are free to implement compatible alternatives) to get the +bar+ block
+configuration from i3.
+
+Depending on the input, the reply is either:
+
+empty input::
+ An array of configured bar IDs
+Bar ID::
+ A JSON map containing the configuration for the specified bar.
+
+Each bar configuration has the following properties:
+
+id (string)::
+ The ID for this bar. Included in case you request multiple
+ configurations and want to differentiate the different replies.
+mode (string)::
+ Either +dock+ (the bar sets the dock window type) or +hide+ (the bar
+ does not show unless a specific key is pressed).
+position (string)::
+ Either +bottom+ or +top+ at the moment.
+status_command (string)::
+ Command which will be run to generate a statusline. Each line on stdout
+ of this command will be displayed in the bar. At the moment, no
+ formatting is supported.
+font (string)::
+ The font to use for text on the bar.
+workspace_buttons (boolean)::
+ Display workspace buttons or not? Defaults to true.
+verbose (boolean)::
+ Should the bar enable verbose output for debugging? Defaults to false.
+colors (map)::
+ Contains key/value pairs of colors. Each value is a color code in hex,
+ formatted #rrggbb (like in HTML).
+
+The following colors can be configured at the moment:
+
+background::
+ Background color of the bar.
+statusline::
+ Text color to be used for the statusline.
+focused_workspace_text/focused_workspace_bg::
+ Text color/background color for a workspace button when the workspace
+ has focus.
+active_workspace_text/active_workspace_bg::
+ Text color/background color for a workspace button when the workspace
+ is active (visible) on some output, but the focus is on another one.
+ You can only tell this apart from the focused workspace when you are
+ using multiple monitors.
+inactive_workspace_text/inactive_workspace_bg::
+ Text color/background color for a workspace button when the workspace
+ does not have focus and is not active (visible) on any output. This
+ will be the case for most workspaces.
+urgent_workspace_text/urgent_workspace_bar::
+ Text color/background color for workspaces which contain at least one
+ window with the urgency hint set.
+
+
+*Example of configured bars:*
+--------------
+["bar-bxuqzf"]
+--------------
+
+*Example of bar configuration:*
+--------------
+{
+ "id": "bar-bxuqzf",
+ "mode": "dock",
+ "position": "bottom",
+ "status_command": "i3status",
+ "font": "-misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1",
+ "workspace_buttons": true,
+ "verbose": false,
+ "colors": {
+ "background": "#c0c0c0",
+ "statusline": "#00ff00",
+ "focused_workspace_text": "#ffffff",
+ "focused_workspace_bg": "#000000"
+ }
+}
+--------------
+
+=== LOG_MARKERS reply
+
+Gets the SHM log markers for the current position, the last wrap, the
+SHM segment name and segment size. This is necessary for tools like
+i3-dump-log which want to display the SHM log.
+
+The reply is a JSON map with the following entries:
+
+shmname (string)::
+ The name of the SHM segment, will be of the format +/i3-log-<pid>+.
+size (integer)::
+ The size (in bytes) of the SHM segment. If this is 0, SHM logging is
+ disabled.
+offset_next_write (integer)::
+ The offset in the SHM segment at which the next write will happen.
+ Tools should start printing lines from here, since the bytes following
+ this offset are the oldest log lines. However, the first line might be
+ garbled, so it makes sense to skip all bytes until the first \0.
+offset_last_wrap (integer)::
+ The offset in the SHM segment at which the last wrap occured. i3 only
+ stores entire messages in the SHM log, so it might waste a few bytes at
+ the end to be more efficient. Tools should not print content after the
+ offset_last_wrap.
+
+*Example*:
+-----------------------------
+{
+ "offset_next_write":132839,
+ "offset_last_wrap":26214400,
+ "shmname":"/i3-log-3392",
+ "size":26214400
+}
+-----------------------------
+
== Events
[[events]]
"workspace" event before receiving the reply to GET_WORKSPACES. If your
program does not want to cope which such kinds of race conditions (an
event based library may not have a problem here), I suggest you create a
-seperate connection to receive events.
+separate connection to receive events.
=== Subscribing to events
=== workspace event
This event consists of a single serialized map containing a property
-+change (string)+ which indicates the type of the change ("focus", "create",
-"init", "empty", "urgent").
++change (string)+ which indicates the type of the change ("focus", "init",
+"empty", "urgent").
*Example:*
---------------------
projects / i3 / i3 / blobdiff