Please note that you must not have +~/.i3/config+, otherwise the wizard will
exit.
+Since i3 4.0, a new configuration format is used. i3 will try to automatically
+detect the format version of a config file based on a few different keywords,
+but if you want to make sure that your config is read with the new format,
+include the following line in your config file:
+
+---------------------
+# i3 config file (v4)
+---------------------
+
=== Comments
It is possible and recommended to use comments in your configuration file to
can configure mouse bindings in a similar way to key bindings.
*Syntax*:
--------------------------------------------------------------------------------
-bindsym [--release] [--border] [--whole-window] [<Modifiers>+]button<n> command
--------------------------------------------------------------------------------
+----------------------------------------------------------------------------------------------------
+bindsym [--release] [--border] [--whole-window] [--exclude-titlebar] [<Modifiers>+]button<n> command
+----------------------------------------------------------------------------------------------------
By default, the binding will only run when you click on the titlebar of the
window. If the +--release+ flag is given, it will run when the mouse button
of the window is clicked, with the exception of the border. To have a bind run
when the border is clicked, specify the +--border+ flag.
+If the +--exclude-titlebar+ flag is given, the titlebar will not be considered
+for the keybinding.
+
*Examples*:
--------------------------------
# The middle button over a titlebar kills the window
*Syntax*:
---------------
-output <output>
+output primary|<output>
---------------
*Example*:
statusline #ffffff
}
}
+
+# show bar on the primary monitor and on HDMI2
+bar {
+ output primary
+ output HDMI2
+ status_command i3status
+}
+
-------------------------------
+Note that you might not have a primary output configured yet. To do so, run:
+-------------------------
+xrandr --output <output> --primary
+-------------------------
=== Tray output
contains a single window. Otherwise it makes the current window a split
container with opposite orientation compared to the parent container.
Use +layout toggle split+ to change the layout of any split container from
-splitv to splith or vice-versa.
+splitv to splith or vice-versa. You can also define a custom sequence of layouts
+to cycle through with +layout toggle+, see <<manipulating_layout>>.
*Syntax*:
--------------------------------
or +layout splith+ to change the current container layout to splith/splitv,
stacking, tabbed layout, splitv or splith, respectively.
+Specify up to four layouts after +layout toggle+ to cycle through them. Every
+time the command is executed, the layout specified after the currently active
+one will be applied. If the currently active layout is not in the list, the
+first layout in the list will be activated.
+
To make the current window (!) fullscreen, use +fullscreen enable+ (or
+fullscreen enable global+ for the global mode), to leave either fullscreen
mode use +fullscreen disable+, and to toggle between these two states use
--------------------------------------------
layout default|tabbed|stacking|splitv|splith
layout toggle [split|all]
+layout toggle [split|tabbed|stacking|splitv|splith] [split|tabbed|stacking|splitv|splith]…
--------------------------------------------
*Examples*:
# Toggle between stacking/tabbed/splith/splitv:
bindsym $mod+x layout toggle all
+# Toggle between stacking/tabbed/splith:
+bindsym $mod+x layout toggle stacking tabbed splith
+
+# Toggle between splitv/tabbed
+bindsym $mod+x layout toggle splitv tabbed
+
+# Toggle between last split layout/tabbed/stacking
+bindsym $mod+x layout toggle split tabbed stacking
+
# Toggle fullscreen
bindsym $mod+f fullscreen toggle
----------------------------------------------
focus left|right|down|up
focus parent|child|floating|tiling|mode_toggle
-focus output left|right|up|down|<output>
+focus output left|right|up|down|primary|<output>
----------------------------------------------
*Examples*:
# Focus the big output
bindsym $mod+x focus output HDMI-2
+
+# Focus the primary output
+bindsym $mod+x focus output primary
-------------------------------------------------
+Note that you might not have a primary output configured yet. To do so, run:
+-------------------------
+xrandr --output <output> --primary
+-------------------------
+
=== Moving containers
Use the +move+ command to move a container.
bindsym $mod+m move position mouse
-------------------------------------------------------
+=== Swapping containers
+
+Two containers can be swapped (i.e., move to each other's position) by using
+the +swap+ command. They will assume the position and geometry of the container
+they are swapped with.
+
+The first container to participate in the swapping can be selected through the
+normal command criteria process with the focused window being the usual
+fallback if no criteria are specified. The second container can be selected
+using one of the following methods:
+
++id+:: The X11 window ID of a client window.
++con_id+:: The i3 container ID of a container.
++mark+:: A container with the specified mark, see <<vim_like_marks>>.
+
+Note that swapping does not work with all containers. Most notably, swapping
+floating containers or containers that have a parent-child relationship to one
+another does not work.
+
+*Syntax*:
+----------------------------------------
+swap container with id|con_id|mark <arg>
+----------------------------------------
+
+*Examples*:
+-----------------------------------------------------------------
+# Swaps the focused container with the container marked »swapee«.
+swap container with mark swapee
+
+# Swaps container marked »A« and »B«
+[con_mark="^A$"] swap container with mark B
+-----------------------------------------------------------------
+
=== Sticky floating windows
If you want a window to stick to the glass, i.e., have it stay on screen even
bindsym $mod+r exec i3-input -F 'rename workspace to "%s"' -P 'New name: '
--------------------------------------------------------------------------
+If you want to rename workspaces on demand while keeping the navigation stable,
+you can use a setup like this:
+
+*Example*:
+-------------------------
+bindsym $mod+1 workspace number "1: www"
+bindsym $mod+2 workspace number "2: mail"
+...
+-------------------------
+
+If a workspace does not exist, the command +workspace number "1: mail"+ will
+create workspace "1: mail".
+
+If a workspace with number 1 does already exist, the command will switch to this
+workspace and ignore the text part. So even when the workspace has been renamed
+to "1: web", the above command will still switch to it.
+
=== Moving workspaces to a different screen
See <<move_to_outputs>> for how to move a container/workspace to a different
*Syntax*:
------------------------------------------------------------
-move container to output left|right|down|up|current|<output>
-move workspace to output left|right|down|up|current|<output>
+move container to output left|right|down|up|current|primary|<output>
+move workspace to output left|right|down|up|current|primary|<output>
------------------------------------------------------------
*Examples*:
# Put this window on the presentation output.
bindsym $mod+x move container to output VGA1
+
+# Put this window on the primary output.
+bindsym $mod+x move container to output primary
--------------------------------------------------------
+-------------------------------
+Note that you might not have a primary output configured yet. To do so, run:
+-------------------------
+xrandr --output <output> --primary
+-------------------------
+
=== Moving containers/windows to marks
To move a container to another container with a specific mark (see <<vim_like_marks>>),
projects / i3 / i3 / blobdiff