press +$mod+f+.
There is also a global fullscreen mode in i3 in which the client will span all
-available outputs (the command is +fullscreen global+).
+available outputs (the command is +fullscreen toggle global+).
=== Opening other applications
=== Exiting i3
To cleanly exit i3 without killing your X server, you can use +$mod+Shift+e+.
+By default, a dialog will ask you to confirm if you really want to quit.
=== Floating
You can toggle floating mode for a window by pressing +$mod+Shift+Space+. By
dragging the window’s titlebar with your mouse you can move the window
around. By grabbing the borders and moving them you can resize the window. You
-can also do that by using the <<floating_modifier>>.
+can also do that by using the <<floating_modifier>>. Another way to resize
+floating windows using the mouse is to right-click on the titlebar and drag.
For resizing floating windows with your keyboard, see <<resizingconfig>>.
on the layout the container is in (vertical for splitv and stacking, horizontal
for splith and tabbed). So, in our example with the workspace, the default
layout of the workspace +Container+ is splith (most monitors are widescreen
-nowadays). If you change the layout to splitv (+$mod+l+ in the default config)
+nowadays). If you change the layout to splitv (+$mod+v+ in the default config)
and *then* open two terminals, i3 will configure your windows like this:
image::tree-shot2.png["shot2",title="Vertical Workspace Orientation"]
windows are directly attached to one node inside i3’s layout tree, the
workspace node. By default, the workspace node’s orientation is +horizontal+.
-Now you move one of these terminals down (+$mod+k+ by default). The workspace
-node’s orientation will be changed to +vertical+. The terminal window you moved
-down is directly attached to the workspace and appears on the bottom of the
-screen. A new (horizontal) container was created to accomodate the other two
-terminal windows. You will notice this when switching to tabbed mode (for
-example). You would end up having one tab called "another container" and the
-other one being the terminal window you moved down.
+Now you move one of these terminals down (+$mod+Shift+k+ by default). The
+workspace node’s orientation will be changed to +vertical+. The terminal window
+you moved down is directly attached to the workspace and appears on the bottom
+of the screen. A new (horizontal) container was created to accommodate the
+other two terminal windows. You will notice this when switching to tabbed mode
+(for example). You would end up having one tab with a representation of the split
+container (e.g., "H[urxvt firefox]") and the other one being the terminal window
+you moved down.
[[configuring]]
== Configuring i3
*Examples*:
--------------------------------
# Fullscreen
-bindsym $mod+f fullscreen
+bindsym $mod+f fullscreen toggle
# Restart
bindsym $mod+Shift+r restart
bindings. For example, when typing, capslock+1 or capslock+2 for switching
workspaces is totally convenient. Try it :-).
+[[mousebindings]]
+
+=== Mouse bindings
+
+A mouse binding makes i3 execute a command upon pressing a specific mouse
+button in the scope of the clicked container (see <<command_criteria>>). You
+can configure mouse bindings in a similar way to key bindings.
+
+*Syntax*:
+----------------------------------
+bindsym [--release] [--border] [--whole-window] [Modifiers+]button[n] command
+----------------------------------
+
+By default, the binding will only run when you click on the titlebar of the
+window. If the +--release+ flag is given, it will run when the mouse button
+is released.
+
+If the +--whole-window+ flag is given, the binding will also run when any part
+of the window is clicked, with the exception of the border. To have a bind run
+when the border is clicked, specify the +--border+ flag.
+
+*Examples*:
+--------------------------------
+# The middle button over a titlebar kills the window
+bindsym --release button2 kill
+
+# The middle button and a modifer over any part of the window kills the window
+bindsym --whole-window $mod+button2 kill
+
+# The right button toggles floating
+bindsym button3 floating toggle
+bindsym $mod+button3 floating toggle
+
+# The side buttons move the window around
+bindsym button9 move left
+bindsym button8 move right
+--------------------------------
+
[[floating_modifier]]
=== The floating modifier
(anything higher than wide) get vertical orientation.
With the +default_orientation+ configuration directive, you can override that
-behaviour.
+behavior.
*Syntax*:
----------------------------------------------
The valid criteria are the same as those for commands, see <<command_criteria>>.
+=== Don't focus window upon opening
+
+[[no_focus]]
+
+When a new window appears, it will be focused. The +no_focus+ directive allows preventing
+this from happening and can be used in combination with <<command_criteria>>.
+
+Note that this does not apply to all cases, e.g., when feeding data into a running application
+causing it to request being focused. To configure the behavior in such cases, refer to
+<<focus_on_window_activation>>.
+
+*Syntax*:
+-------------------
+no_focus <criteria>
+-------------------
+
+*Example*:
+-------------------------------
+no_focus [window_role="pop-up"]
+-------------------------------
+
=== Variables
As you learned in the section about keyboard bindings, you will have
A client which is not the focused one of its container.
client.urgent::
A client which has its urgency hint activated.
+client.placeholder::
+ Background and text color are used to draw placeholder window contents
+ (when restoring layouts). Border and indicator are ignored.
You can also specify the color to be used to paint the background of the client
windows. This color will be used to paint the window on top of which the client
client.focused_inactive #333333 #5f676a #ffffff #484e50
client.unfocused #333333 #222222 #888888 #292d2e
client.urgent #2f343a #900000 #ffffff #900000
+client.placeholder #000000 #0c0c0c #ffffff #000000
---------------------------------------------------------
Note that for the window decorations, the color around the child window is the
focus_follows_mouse no
----------------------
+=== Mouse warping
+
+By default, when switching focus to a window on a different output (e.g.
+focusing a window on workspace 3 on output VGA-1, coming from workspace 2 on
+LVDS-1), the mouse cursor is warped to the center of that window.
+
+With the +mouse_warping+ option, you can control when the mouse cursor should
+be warped. +none+ disables warping entirely, whereas +output+ is the default
+behavior described above.
+
+*Syntax*:
+---------------------------
+mouse_warping <output|none>
+---------------------------
+
+*Example*:
+------------------
+mouse_warping none
+------------------
+
=== Popups during fullscreen mode
When you are in fullscreen mode, some applications still open popup windows
When being in a tabbed or stacked container, the first container will be
focused when you use +focus down+ on the last container -- the focus wraps. If
however there is another stacked/tabbed container in that direction, focus will
-be set on that container. This is the default behaviour so you can navigate to
+be set on that container. This is the default behavior so you can navigate to
all your windows without having to use +focus parent+.
If you want the focus to *always* wrap and you are aware of using +focus
reconfiguring your screens on the fly (they are read only once on startup and
that’s it).
-For people who do cannot modify their +~/.xsession+ to add the
+For people who cannot modify their +~/.xsession+ to add the
+--force-xinerama+ commandline parameter, a configuration option is provided:
*Syntax*:
If an application on another workspace sets an urgency hint, switching to this
workspace may lead to immediate focus of the application, which also means the
-window decoration color would be immediately resetted to +client.focused+. This
+window decoration color would be immediately reset to +client.focused+. This
may make it unnecessarily hard to tell which window originally raised the
event.
force_display_urgency_hint 500 ms
---------------------------------
+=== Focus on window activation
+
+[[focus_on_window_activation]]
+
+If a window is activated, e.g., via +google-chrome www.google.com+, it may request
+to take focus. Since this may not preferable, different reactions can be configured.
+
+Note that this may not affect windows that are being opened. To prevent new windows
+from being focused, see <<no_focus>>.
+
+*Syntax*:
+----------------------------------------------------
+focus_on_window_activation <smart|urgent|focus|none>
+----------------------------------------------------
+
+The different modes will act as follows:
+
+smart::
+ This is the default behavior. If the window requesting focus is on an active
+ workspace, it will receive the focus. Otherwise, the urgency hint will be set.
+urgent::
+ The window will always be marked urgent, but the focus will not be stolen.
+focus::
+ The window will always be focused and not be marked urgent.
+none::
+ The window will neither be focused, nor be marked urgent.
+
+=== Drawing marks on window decoration
+
+If activated, marks on windows are drawn in their window decoration. However,
+any mark starting with an underscore in its name (+_+) will not be drawn even if
+this option is activated.
+
+The default for this option is +yes+.
+
+*Syntax*:
+-------------------
+show_marks [yes|no]
+-------------------
+
+*Example*:
+--------------
+show_marks yes
+--------------
+
== Configuring i3bar
The bar at the bottom of your monitor is drawn by a separate process called
Available modifiers are Mod1-Mod5, Shift, Control (see +xmodmap(1)+).
+=== Mouse button commands
+
+Specifies a command to run when a button was pressed on i3bar to override the
+default behavior. Currently only the mouse wheel buttons are supported. This is
+useful for disabling the scroll wheel action or running scripts that implement
+custom behavior for these buttons.
+
+*Syntax*:
+---------------------
+wheel_up_cmd <command>
+wheel_down_cmd <command>
+---------------------
+
+*Example*:
+---------------------
+bar {
+ wheel_up_cmd nop
+ wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
+}
+---------------------
+
=== Bar ID
Specifies the bar ID for the configured bar instance. If this option is missing,
}
--------------------------------------------------------------
+=== Custom separator symbol
+
+Specifies a custom symbol to be used for the separator as opposed to the vertical,
+one pixel thick separator.
+
+*Syntax*:
+-------------------------
+separator_symbol <symbol>
+-------------------------
+
+*Example*:
+------------------------
+bar {
+ separator_symbol ":|:"
+}
+------------------------
+
=== Workspace buttons
Specifies whether workspace buttons should be shown or not. This is useful if
}
------------------------
+=== Strip workspace numbers
+
+Specifies whether workspace numbers should be displayed within the workspace
+buttons. This is useful if you want to have a named workspace that stays in
+order on the bar according to its number without displaying the number prefix.
+
+When +strip_workspace_numbers+ is set to +yes+, any workspace that has a name of
+the form "[n]:[NAME]" will display only the name. You could use this, for
+instance, to display Roman numerals rather than digits by naming your
+workspaces to "1:I", "2:II", "3:III", "4:IV", ...
+
+The default is to display the full name within the workspace button.
+
+*Syntax*:
+----------------------------------
+strip_workspace_numbers <yes|no>
+----------------------------------
+
+*Example*:
+----------------------------
+bar {
+ strip_workspace_numbers yes
+}
+----------------------------
+
=== Binding Mode indicator
Specifies whether the current binding mode indicator should be shown or not.
[[command_criteria]]
Furthermore, you can change the scope of a command - that is, which containers
-should be affected by that command, by using various criteria. These are
-prefixed in square brackets to every command. If you want to kill all windows
-which have the class Firefox, use:
+should be affected by that command, by using various criteria. The criteria
+are specified before any command in a pair of square brackets and are separated
+by space.
+
+When using multiple commands, separate them by using a +,+ (a comma) instead of
+a semicolon. Criteria apply only until the next semicolon, so if you use a
+semicolon to separate commands, only the first one will be executed for the
+matched window(s).
*Example*:
------------------------------------
+# if you want to kill all windows which have the class Firefox, use:
bindsym $mod+x [class="Firefox"] kill
# same thing, but case-insensitive
bindsym $mod+x [class="(?i)firefox"] kill
+
+# kill only the About dialog from Firefox
+bindsym $mod+x [class="Firefox" window_role="About"] kill
+
+# enable floating mode and move container to workspace 4
+for_window [class="^evil-app$"] floating enable, move container to workspace 4
------------------------------------
The criteria which are currently implemented are:
or +layout splith+ to change the current container layout to splith/splitv,
stacking, tabbed layout, splitv or splith, respectively.
-To make the current window (!) fullscreen, use +fullscreen+, to make
-it floating (or tiling again) use +floating enable+ respectively +floating disable+
-(or +floating toggle+):
+To make the current window (!) fullscreen, use +fullscreen enable+ (or
++fullscreen enable global+ for the global mode), to leave either fullscreen
+mode use +fullscreen disable+, and to toggle between these two states use
++fullscreen toggle+ (or +fullscreen toggle global+).
+
+Likewise, to make the current window floating (or tiling again) use +floating
+enable+ respectively +floating disable+ (or +floating toggle+):
*Syntax*:
--------------
bindsym $mod+x layout toggle all
# Toggle fullscreen
-bindsym $mod+f fullscreen
+bindsym $mod+f fullscreen toggle
# Toggle floating/tiling
bindsym $mod+t floating toggle
See <<move_to_outputs>> for how to move a container/workspace to a different
RandR output.
+Workspace names are parsed as
+https://developer.gnome.org/pango/stable/PangoMarkupFormat.html[Pango markup]
+by i3bar.
+
[[back_and_forth]]
To switch back to the previously focused workspace, use +workspace
back_and_forth+; likewise, you can move containers to the previously focused
-------------------------
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
+bindsym $mod+3 workspace 3:<span foreground="red">vim</span>
...
bindsym $mod+Shift+1 move container to workspace 1
You can rename workspaces. This might be useful to start with the default
numbered workspaces, do your work, and rename the workspaces afterwards to
reflect what’s actually on them. You can also omit the old name to rename
-the currently focused workspace. This is handy if you wan't to use the
+the currently focused workspace. This is handy if you want to use the
rename command with +i3-input+.
*Syntax*:
i3-msg 'rename workspace 1 to "1: www"'
i3-msg 'rename workspace "1: www" to "10: www"'
i3-msg 'rename workspace to "2: mail"
-bindsym $mod+r exec i3-input -F 'rename workspace to %s' -P 'New name: '
+bindsym $mod+r exec i3-input -F 'rename workspace to "%s"' -P 'New name: '
--------------------------------------------------------------------------
=== Moving workspaces to a different screen
for this purpose: It lets you input a command and sends the command to i3. It
can also prefix this command and display a custom prompt for the input dialog.
+The additional +--toggle+ option will remove the mark if the window already has
+this mark, add it if the window has none or replace the current mark if it has
+another mark.
+
+Refer to +show_marks+ if you don't want marks to be shown in the window decoration.
+
*Syntax*:
------------------------------
-mark identifier
+mark [--toggle] identifier
[con_mark="identifier"] focus
unmark identifier
------------------------------
bindsym mod4+s [title="^Sup ::"] scratchpad show
------------------------------------------------
+=== Nop
+
+There is a no operation command +nop+ which allows you to override default
+behavior. This can be useful for, e.g., disabling a focus change on clicks with
+the middle mouse button.
+
+The optional +comment+ argument is ignored, but will be printed to the log file
+for debugging purposes.
+
+*Syntax*:
+---------------
+nop [<comment>]
+---------------
+
+*Example*:
+----------------------------------------------
+# Disable focus change for clicks on titlebars
+# with the middle mouse button
+bindsym button2 nop
+----------------------------------------------
+
=== i3bar control
There are two options in the configuration of each i3bar instance that can be
projects / i3 / i3 / blobdiff