March 2013
This document contains all the information you need to configure and use the i3
-window manager. If it does not, please check http://faq.i3wm.org/ first, then
-contact us on IRC (preferred) or post your question(s) on the mailing list.
+window manager. If it does not, please check https://www.reddit.com/r/i3wm/
+first, then contact us on IRC (preferred) or post your question(s) on the
+mailing list.
== Default keybindings
---------------------
-=== Hiding vertical borders
+[[_hiding_vertical_borders]]
+=== Hiding borders adjacent to the screen edges
-You can hide vertical borders adjacent to the screen edges using
+You can hide container borders adjacent to the screen edges using
+hide_edge_borders+. This is useful if you are using scrollbars, or do not want
-to waste even two pixels in displayspace. Default is none.
+to waste even two pixels in displayspace. The "smart" setting hides borders on
+workspaces with only one window visible, but keeps them on workspaces with
+multiple windows visible. Default is none.
*Syntax*:
-----------------------------------------------
-hide_edge_borders none|vertical|horizontal|both
+hide_edge_borders none|vertical|horizontal|both|smart
-----------------------------------------------
*Example*:
you should create a little script which generates a configuration file and run
it before starting i3 (for example in your +~/.xsession+ file).
+Also see <<xresources>> to learn how to create variables based on resources
+loaded from the X resource database.
+
+[[xresources]]
+=== X resources
+
+<<variables>> can also be created using a value configured in the X resource
+database. This is useful, for example, to avoid configuring color values within
+the i3 configuration. Instead, the values can be configured, once, in the X
+resource database to achieve an easily maintainable, consistent color theme
+across many X applications.
+
+Defining a resource will load this resource from the resource database and
+assign its value to the specified variable. A fallback must be specified in
+case the resource cannot be loaded from the database.
+
+*Syntax*:
+----------------------------------------------------
+set_from_resource $<name> <resource_name> <fallback>
+----------------------------------------------------
+
+*Example*:
+----------------------------------------------------------------------------
+# The ~/.Xresources should contain a line such as
+# *color0: #121212
+# and must be loaded properly, e.g., by using
+# xrdb ~/.Xresources
+# This value is picked up on by other applications (e.g., the URxvt terminal
+# emulator) and can be used in i3 like this:
+set_from_resource $black i3wm.color0 #000000
+----------------------------------------------------------------------------
+
[[assign_workspace]]
=== Automatically putting clients on specific workspaces
See <<command_chaining>> for details on the special meaning of +;+ (semicolon)
and +,+ (comma): they chain commands together in i3, so you need to use quoted
-strings if they appear in your command.
+strings (as shown in <<exec_quoting>>) if they appear in your command.
*Syntax*:
---------------------------------------
You can change all colors which i3 uses to draw the window decorations.
*Syntax*:
-------------------------------------------------------
-<colorclass> <border> <background> <text> <indicator>
-------------------------------------------------------
+--------------------------------------------------------------------
+<colorclass> <border> <background> <text> <indicator> <child_border>
+--------------------------------------------------------------------
Where colorclass can be one of:
Colors are in HTML hex format (#rrggbb), see the following example:
*Examples (default colors)*:
----------------------------------------------------------
-# class border backgr. text indicator
-client.focused #4c7899 #285577 #ffffff #2e9ef4
-client.focused_inactive #333333 #5f676a #ffffff #484e50
-client.unfocused #333333 #222222 #888888 #292d2e
-client.urgent #2f343a #900000 #ffffff #900000
-client.placeholder #000000 #0c0c0c #ffffff #000000
+----------------------------------------------------------------------
+# class border backgr. text indicator child_border
+client.focused #4c7899 #285577 #ffffff #2e9ef4 #285577
+client.focused_inactive #333333 #5f676a #ffffff #484e50 #5f676a
+client.unfocused #333333 #222222 #888888 #292d2e #222222
+client.urgent #2f343a #900000 #ffffff #900000 #900000
+client.placeholder #000000 #0c0c0c #ffffff #000000 #0c0c0c
client.background #ffffff
----------------------------------------------------------
+----------------------------------------------------------------------
Note that for the window decorations, the color around the child window is the
-background color, and the border color is only the two thin lines at the top of
-the window.
+"child_border", and "border" color is only the two thin lines around the
+titlebar.
The indicator color is used for indicating where a new window will be opened.
For horizontal split containers, the right border will be painted in indicator
Config files support line continuation, meaning when you end a line in a
backslash character (`\`), the line-break will be ignored by the parser. This
feature can be used to create more readable configuration files.
+Commented lines are not continued.
*Examples*:
-------------------
bindsym Mod1+f \
fullscreen toggle
+
+# this line is not continued \
+bindsym Mod1+F fullscreen toggle
-------------------
== Configuring i3bar
-------------------------
mode dock|hide|invisible
hidden_state hide|show
-modifier <Modifier>
+modifier <Modifier>|none
------------------------
*Example*:
}
----------------
-Available modifiers are Mod1-Mod5, Shift, Control (see +xmodmap(1)+).
+Available modifiers are Mod1-Mod5, Shift, Control (see +xmodmap(1)+). You can
+also use "none" if you don't want any modifier to trigger this behavior.
=== Mouse button commands
You can configure on which output (monitor) the icons should be displayed or
you can turn off the functionality entirely.
+You can use multiple +tray_output+ directives in your config to specify a list
+of outputs on which you want the tray to appear. The first available output in
+that list as defined by the order of the directives will be used for the tray
+output.
+
*Syntax*:
---------------------------------
tray_output none|primary|<output>
Text color to be used for the statusline.
separator::
Text color to be used for the separator.
+focused_background::
+ Background color of the bar on the currently focused monitor output. If
+ not used, the color will be taken from +background+.
+focused_statusline::
+ Text color to be used for the statusline on the currently focused
+ monitor output. If not used, the color will be taken from +statusline+.
+focused_separator::
+ Text color to be used for the separator on the currently focused
+ monitor output. If not used, the color will be taken from +separator+.
focused_workspace::
Border, background and text color for a workspace button when the workspace
has focus.
window_type::
Compare the window type (_NET_WM_WINDOW_TYPE). Possible values are
+normal+, +dialog+, +utility+, +toolbar+, +splash+, +menu+, +dropdown_menu+,
- +popup_menu+ and +tooltip+.
+ +popup_menu+, +tooltip+ and +notification+.
id::
Compares the X11 window ID, which you can get via +xwininfo+ for example.
title::
See <<command_chaining>> for details on the special meaning of +;+ (semicolon)
and +,+ (comma): they chain commands together in i3, so you need to use quoted
-strings if they appear in your command.
+strings (as shown in <<exec_quoting>>) if they appear in your command.
*Syntax*:
--------------------------------
and Qt using applications seem to be, though), you will end up with a watch
cursor for 60 seconds.
+[[exec_quoting]]
+If the command to be executed contains a +;+ (semicolon) and/or a +,+ (comma),
+the entire command must be quoted. For example, to have a keybinding for the
+shell command +notify-send Hello, i3+, you would add an entry to your
+configuration file like this:
+
+*Example*:
+------------------------------
+# Execute a command with a comma in it
+bindsym $mod+p exec "notify-send Hello, i3"
+------------------------------
+
+If however a command with a comma and/or semicolon itself requires quotes, you
+must escape the internal quotation marks with double backslashes, like this:
+
+*Example*:
+------------------------------
+# Execute a command with a comma, semicolon and internal quotes
+bindsym $mod+p exec "notify-send \\"Hello, i3; from $USER\\""
+------------------------------
+
=== Splitting containers
The split command makes the current window a split container. Split containers
If you apply this command to a split container with the same orientation,
nothing will happen. If you use a different orientation, the split container’s
-orientation will be changed (if it does not have more than one window). Use
-+layout toggle split+ to change the layout of any split container from splitv
-to splith or vice-versa.
+orientation will be changed (if it does not have more than one window).
+The +toggle+ option will toggle the orientation of the split container if it
+contains a single window. Otherwise it makes the current window a split
+container with opposite orientation compared to the parent container.
+Use +layout toggle split+ to change the layout of any split container from
+splitv to splith or vice-versa.
*Syntax*:
--------------------------
-split vertical|horizontal
--------------------------
+--------------------------------
+split vertical|horizontal|toggle
+--------------------------------
*Example*:
-------------------------------
+-------------------------------
bindsym $mod+v split vertical
bindsym $mod+h split horizontal
-------------------------------
+bindsym $mod+t split toggle
+-------------------------------
=== Manipulating layout
=== Changing (named) workspaces/moving to workspaces
To change to a specific workspace, use the +workspace+ command, followed by the
-number or name of the workspace. To move containers to specific workspaces, use
-+move container to workspace+.
+number or name of the workspace. Pass the optional flag
++--no-auto-back-and-forth+ to disable <<back_and_forth>> for this specific call
+only.
+
+To move containers to specific workspaces, use +move container to workspace+.
You can also switch to the next and previous workspace with the commands
+workspace next+ and +workspace prev+, which is handy, for example, if you have
workspace using +move container to workspace back_and_forth+.
*Syntax*:
------------------------------------
+--------------------------------------------------------------------------------
workspace next|prev|next_on_output|prev_on_output
workspace back_and_forth
-workspace <name>
-workspace number <name>
+workspace [--no-auto-back-and-forth] <name>
+workspace [--no-auto-back-and-forth] number <name>
-move [window|container] [to] workspace <name>
-move [window|container] [to] workspace number <name>
+move [--no-auto-back-and-forth] [window|container] [to] workspace <name>
+move [--no-auto-back-and-forth] [window|container] [to] workspace number <name>
move [window|container] [to] workspace prev|next|current
------------------------------------
+--------------------------------------------------------------------------------
*Examples*:
-------------------------
---------------------------------------
Alternatively, if you do not want to mess with +i3-input+, you could create
-seperate bindings for a specific set of labels and then only use those labels.
+separate bindings for a specific set of labels and then only use those labels.
///////////////////////////////////////////////////////////////////
[[pango_markup]]
and the following placeholders which will be replaced:
+%title+::
- The X11 window title (_NET_WM_NAME or WM_NAME as fallback).
+ For normal windows, this is the X11 window title (_NET_WM_NAME or WM_NAME
+ as fallback). When used on containers without a window (e.g., a split
+ container inside a tabbed/stacked layout), this will be the tree
+ representation of the container (e.g., "H[xterm xterm]").
+%class+::
The X11 window class (second part of WM_CLASS). This corresponds to the
+class+ criterion, see <<command_criteria>>.
There is also +border toggle+ which will toggle the different border styles.
+Note that "pixel" refers to logical pixel. On HiDPI displays, a logical pixel
+may be represented by multiple physical pixels, so +pixel 1+ might not
+necessarily translate into a single pixel row wide border.
+
*Syntax*:
-----------------------------------------------
border normal|pixel [<n>]
projects / i3 / i3 / blobdiff