You can also use <<binding_modes>> to define a mode for resizing via the
keyboard. To see an example for this, look at the
-https://github.com/i3/i3/blob/next/i3.config.keycodes[default config] provided
+https://github.com/i3/i3/blob/next/etc/config.keycodes[default config] provided
by i3.
=== Restarting i3 inplace
floating windows using the mouse is to right-click on the titlebar and drag.
For resizing floating windows with your keyboard, see the resizing binding mode
-provided by the i3 https://github.com/i3/i3/blob/next/i3.config.keycodes[default config].
+provided by the i3 https://github.com/i3/i3/blob/next/etc/config.keycodes[default config].
Floating windows are always on top of tiling windows.
can configure mouse bindings in a similar way to key bindings.
*Syntax*:
--------------------------------------------------------------------------------
-bindsym [--release] [--border] [--whole-window] [<Modifiers>+]button<n> command
--------------------------------------------------------------------------------
+----------------------------------------------------------------------------------------------------
+bindsym [--release] [--border] [--whole-window] [--exclude-titlebar] [<Modifiers>+]button<n> command
+----------------------------------------------------------------------------------------------------
By default, the binding will only run when you click on the titlebar of the
window. If the +--release+ flag is given, it will run when the mouse button
of the window is clicked, with the exception of the border. To have a bind run
when the border is clicked, specify the +--border+ flag.
+If the +--exclude-titlebar+ flag is given, the titlebar will not be considered
+for the keybinding.
+
*Examples*:
--------------------------------
# The middle button over a titlebar kills the window
*Example*:
------------------------------------------------------------------------
-# Press $mod+o followed by either f, t, Esc or Return to launch firefox,
+# Press $mod+o followed by either f, t, Escape or Return to launch firefox,
# thunderbird or return to the default mode, respectively.
set $mode_launcher Launch: [f]irefox [t]hunderbird
bindsym $mod+o mode "$mode_launcher"
bindsym f exec firefox
bindsym t exec thunderbird
- bindsym Esc mode "default"
+ bindsym Escape mode "default"
bindsym Return mode "default"
}
------------------------------------------------------------------------
You can hide container borders adjacent to the screen edges using
+hide_edge_borders+. This is useful if you are using scrollbars, or do not want
-to waste even two pixels in displayspace. Default is none.
+to waste even two pixels in displayspace. The "smart" setting hides borders on
+workspaces with only one window visible, but keeps them on workspaces with
+multiple windows visible. Default is none.
*Syntax*:
-----------------------------------------------
-hide_edge_borders none|vertical|horizontal|both
+hide_edge_borders none|vertical|horizontal|both|smart
-----------------------------------------------
*Example*:
=== Focus follows mouse
-By default, window focus follows your mouse movements. However, if you have a
-setup where your mouse usually is in your way (like a touchpad on your laptop
-which you do not want to disable completely), you might want to disable 'focus
-follows mouse' and control focus only by using your keyboard. The mouse will
-still be useful inside the currently active window (for example to click on
-links in your browser window).
+By default, window focus follows your mouse movements as the mouse crosses
+window borders. However, if you have a setup where your mouse usually is in your
+way (like a touchpad on your laptop which you do not want to disable
+completely), you might want to disable 'focus follows mouse' and control focus
+only by using your keyboard. The mouse will still be useful inside the
+currently active window (for example to click on links in your browser window).
*Syntax*:
--------------------------
[[show_marks]]
=== Drawing marks on window decoration
-If activated, marks on windows are drawn in their window decoration. However,
-any mark starting with an underscore in its name (+_+) will not be drawn even if
-this option is activated.
+If activated, marks (see <<vim_like_marks>>) on windows are drawn in their window
+decoration. However, any mark starting with an underscore in its name (+_+) will
+not be drawn even if this option is activated.
The default for this option is +yes+.
*Syntax*:
---------------
-output <output>
+output primary|<output>
---------------
*Example*:
statusline #ffffff
}
}
+
+# show bar on the primary monitor and on HDMI2
+bar {
+ output primary
+ output HDMI2
+ status_command i3status
+}
+
-------------------------------
+Note that you might not have a primary output configured yet. To do so, run:
+-------------------------
+xrandr --output <output> --primary
+-------------------------
=== Tray output
# enable floating mode and move container to workspace 4
for_window [class="^evil-app$"] floating enable, move container to workspace 4
+
+# move all floating windows to the scratchpad
+bindsym $mod+x [floating] move scratchpad
------------------------------------
The criteria which are currently implemented are:
Compares the i3-internal container ID, which you can get via the IPC
interface. Handy for scripting. Use the special value +\_\_focused__+
to match only the currently focused window.
+floating::
+ Only matches floating windows. This criterion requires no value.
+tiling::
+ Only matches tiling windows. This criterion requires no value.
The criteria +class+, +instance+, +role+, +title+, +workspace+ and +mark+ are
actually regular expressions (PCRE). See +pcresyntax(3)+ or +perldoc perlre+ for
contains a single window. Otherwise it makes the current window a split
container with opposite orientation compared to the parent container.
Use +layout toggle split+ to change the layout of any split container from
-splitv to splith or vice-versa.
+splitv to splith or vice-versa. You can also define a custom sequence of layouts
+to cycle through with +layout toggle+, see <<manipulating_layout>>.
*Syntax*:
--------------------------------
or +layout splith+ to change the current container layout to splith/splitv,
stacking, tabbed layout, splitv or splith, respectively.
+Specify up to four layouts after +layout toggle+ to cycle through them. Every
+time the command is executed, the layout specified after the currently active
+one will be applied. If the currently active layout is not in the list, the
+first layout in the list will be activated.
+
To make the current window (!) fullscreen, use +fullscreen enable+ (or
+fullscreen enable global+ for the global mode), to leave either fullscreen
mode use +fullscreen disable+, and to toggle between these two states use
--------------------------------------------
layout default|tabbed|stacking|splitv|splith
layout toggle [split|all]
+layout toggle [split|tabbed|stacking|splitv|splith] [split|tabbed|stacking|splitv|splith]…
--------------------------------------------
*Examples*:
# Toggle between stacking/tabbed/splith/splitv:
bindsym $mod+x layout toggle all
+# Toggle between stacking/tabbed/splith:
+bindsym $mod+x layout toggle stacking tabbed splith
+
+# Toggle between splitv/tabbed
+bindsym $mod+x layout toggle splitv tabbed
+
+# Toggle between last split layout/tabbed/stacking
+bindsym $mod+x layout toggle split tabbed stacking
+
# Toggle fullscreen
bindsym $mod+f fullscreen toggle
# Moves the container either to a specific location
# or to the center of the screen. If 'absolute' is
# used, it is moved to the center of all outputs.
-move [absolute] position [[<px> px] [<px> px]|center]
+move [absolute] position <pos_x> [px] <pos_y> [px]
+move [absolute] position center
# Moves the container to the current position of the
# mouse cursor. Only affects floating containers.
bindsym $mod+r exec i3-input -F 'rename workspace to "%s"' -P 'New name: '
--------------------------------------------------------------------------
+If you want to rename workspaces on demand while keeping the navigation stable,
+you can use a setup like this:
+
+*Example*:
+-------------------------
+bindsym $mod+1 workspace number "1: www"
+bindsym $mod+2 workspace number "2: mail"
+...
+-------------------------
+
+If a workspace does not exist, the command +workspace number "1: mail"+ will
+create workspace "1: mail".
+
+If a workspace with number 1 does already exist, the command will switch to this
+workspace and ignore the text part. So even when the workspace has been renamed
+to "1: web", the above command will still switch to it.
+
=== Moving workspaces to a different screen
See <<move_to_outputs>> for how to move a container/workspace to a different
RandR output.
[[move_to_outputs]]
+[[_moving_containers_workspaces_to_randr_outputs]]
=== Moving containers/workspaces to RandR outputs
To move a container to another RandR output (addressed by names like +LVDS1+ or
+right+, +up+ or +down+), there are two commands:
*Syntax*:
-----------------------------------------------------
-move container to output left|right|down|up|<output>
-move workspace to output left|right|down|up|<output>
-----------------------------------------------------
+------------------------------------------------------------
+move container to output left|right|down|up|current|<output>
+move workspace to output left|right|down|up|current|<output>
+------------------------------------------------------------
*Examples*:
--------------------------------------------------------
It is recommended to define bindings for resizing in a dedicated binding mode.
See <<binding_modes>> and the example in the i3
-https://github.com/i3/i3/blob/next/i3.config.keycodes[default config] for more
+https://github.com/i3/i3/blob/next/etc/config.keycodes[default config] for more
context.
*Example*:
track of which window you put where. Thus, you can use vim-like marks to
quickly switch between windows. See <<vim_like_marks>>.
4. For information on how to move existing workspaces between monitors,
- see <<_moving_containers_workspaces_to_randr_outputs>>.
+ see <<move_to_outputs>>.
== i3 and the rest of your software world
projects / i3 / i3 / blobdiff