-# This configuration file was written for the NEO layout. If you are using a
-# different layout, you should change it.
+# i3 config file (v4)
+#
+# Please see http://i3wm.org/docs/userguide.html for a complete reference!
+#
+# This config file uses keycodes (bindsym) and was written for the QWERTY
+# layout.
+#
+# To get a config file with the same key positions, but for your current
+# layout, use the i3-config-wizard
+#
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango:DejaVu Sans Mono 8
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn’t scale on retina/hidpi displays.
+
+# use these keys for focus, movement, and resize directions when reaching for
+# the arrows is not convenient
+set $up l
+set $down k
+set $left j
+set $right semicolon
+
+# use Mouse+Mod1 to drag floating windows to their wanted position
+floating_modifier Mod1
-# ISO 10646 = Unicode
-font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# start a terminal
+bindsym Mod1+Return exec i3-sensible-terminal
-# Use Mouse+Mod1 to drag floating windows to their wanted position
-floating_modifier Mod1
+# kill focused window
+bindsym Mod1+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym Mod1+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
-# temporary path during development
-ipc-socket /tmp/nestedcons
+# change focus
+bindsym Mod1+$left focus left
+bindsym Mod1+$down focus down
+bindsym Mod1+$up focus up
+bindsym Mod1+$right focus right
-# Open empty container
-bindsym Mod1+Shift+Return open
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Left focus left
+bindsym Mod1+Down focus down
+bindsym Mod1+Up focus up
+bindsym Mod1+Right focus right
-# Start terminal (Mod1+Enter)
-bindsym Mod1+Return exec /usr/bin/urxvt
+# move focused window
+bindsym Mod1+Shift+$left move left
+bindsym Mod1+Shift+$down move down
+bindsym Mod1+Shift+$up move up
+bindsym Mod1+Shift+$right move right
-# Start dmenu (Mod1+p)
-bindsym Mod1+p exec /usr/bin/dmenu_run
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Shift+Left move left
+bindsym Mod1+Shift+Down move down
+bindsym Mod1+Shift+Up move up
+bindsym Mod1+Shift+Right move right
+# split in horizontal orientation
bindsym Mod1+h split h
+
+# split in vertical orientation
bindsym Mod1+v split v
-# Fullscreen (Mod1+f)
+# enter fullscreen mode for the focused container
bindsym Mod1+f fullscreen
-# Stacking (Mod1+s)
+# change container layout (stacked, tabbed, toggle split)
bindsym Mod1+s layout stacking
-
-# Tabbed (Mod1+w)
bindsym Mod1+w layout tabbed
+bindsym Mod1+e layout toggle split
-# Default (Mod1+l)
-bindsym Mod1+l layout default
-
-bindsym Mod1+u level up
-#bindsym Mod1+d level down
-
-# Kill current client (Mod1+c)
-bindsym Mod1+c kill
+# toggle tiling / floating
+bindsym Mod1+Shift+space floating toggle
-# Restore saved JSON layout
-bindsym Mod1+y restore /home/michael/i3/layout.json
+# change focus between tiling / floating windows
+bindsym Mod1+space focus mode_toggle
-# Restart i3
-bindsym Mod1+Shift+c restart
-# Exit i3
-bindsym Mod1+Shift+l exit
+# focus the parent container
+bindsym Mod1+a focus parent
-# Focus (Mod1+n/r/t/d)
-bindsym Mod1+n prev h
-bindsym Mod1+r next v
-bindsym Mod1+t prev v
-bindsym Mod1+d next h
+# focus the child container
+#bindsym Mod1+d focus child
-# alternatively, you can use the cursor keys:
-bindsym Mod1+Left prev h
-bindsym Mod1+Right next h
-bindsym Mod1+Down next v
-bindsym Mod1+Up prev v
-
-# Move
-bindsym Mod1+Shift+n move before h
-bindsym Mod1+Shift+r move before v
-bindsym Mod1+Shift+t move after v
-bindsym Mod1+Shift+d move after h
+# move the currently focused window to the scratchpad
+bindsym Mod1+Shift+minus move scratchpad
-# alternatively, you can use the cursor keys:
-bindsym Mod1+Shift+Left move before h
-bindsym Mod1+Shift+Right move after h
-bindsym Mod1+Shift+Down move before v
-bindsym Mod1+Shift+Up move after v
+# Show the next scratchpad window or hide the focused scratchpad window.
+# If there are multiple scratchpad windows, this command cycles through them.
+bindsym Mod1+minus scratchpad show
-# Workspaces (Mod1+1/2/…)
+# switch to workspace
bindsym Mod1+1 workspace 1
bindsym Mod1+2 workspace 2
bindsym Mod1+3 workspace 3
bindsym Mod1+9 workspace 9
bindsym Mod1+0 workspace 10
-# Move to Workspaces
-bindsym Mod1+Shift+1 move workspace 1
-bindsym Mod1+Shift+2 move workspace 2
-bindsym Mod1+Shift+3 move workspace 3
-bindsym Mod1+Shift+4 move workspace 4
-bindsym Mod1+Shift+5 move workspace 5
-bindsym Mod1+Shift+6 move workspace 6
-bindsym Mod1+Shift+7 move workspace 7
-bindsym Mod1+Shift+8 move workspace 8
-bindsym Mod1+Shift+9 move workspace 9
-bindsym Mod1+Shift+0 move workspace 10
+# move focused container to workspace
+bindsym Mod1+Shift+1 move container to workspace 1
+bindsym Mod1+Shift+2 move container to workspace 2
+bindsym Mod1+Shift+3 move container to workspace 3
+bindsym Mod1+Shift+4 move container to workspace 4
+bindsym Mod1+Shift+5 move container to workspace 5
+bindsym Mod1+Shift+6 move container to workspace 6
+bindsym Mod1+Shift+7 move container to workspace 7
+bindsym Mod1+Shift+8 move container to workspace 8
+bindsym Mod1+Shift+9 move container to workspace 9
+bindsym Mod1+Shift+0 move container to workspace 10
+
+# reload the configuration file
+bindsym Mod1+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym Mod1+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+ # These bindings trigger as soon as you enter the resize mode
+
+ # Pressing left will shrink the window’s width.
+ # Pressing right will grow the window’s width.
+ # Pressing up will shrink the window’s height.
+ # Pressing down will grow the window’s height.
+ bindsym $left resize shrink width 10 px or 10 ppt
+ bindsym $down resize grow height 10 px or 10 ppt
+ bindsym $up resize shrink height 10 px or 10 ppt
+ bindsym $right resize grow width 10 px or 10 ppt
+
+ # same bindings, but for the arrow keys
+ bindsym Left resize shrink width 10 px or 10 ppt
+ bindsym Down resize grow height 10 px or 10 ppt
+ bindsym Up resize shrink height 10 px or 10 ppt
+ bindsym Right resize grow width 10 px or 10 ppt
+
+ # back to normal: Enter or Escape
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+
+bindsym Mod1+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+ status_command i3status
+}
+
+#######################################################################
+# automatically start i3-config-wizard to offer the user to create a
+# keysym-based config which used his favorite modifier (alt or windows)
+#
+# i3-config-wizard will not launch if there already is a config file
+# in ~/.i3/config.
+#
+# Please remove the following exec line:
+#######################################################################
+exec i3-config-wizard
projects / i3 / i3 / blobdiff