-# This configuration uses Mod1 and Mod3. Make sure they are mapped properly using xev(1)
-# and xmodmap(1). Usually, Mod1 is Alt (Alt_L) and Mod3 is Windows (Super_L)
-
-# ISO 10646 = Unicode
-font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-
-# Use Mouse+Mod1 to drag floating windows to their wanted position
+# i3 config file (v4)
+#
+# Please see http://i3wm.org/docs/userguide.html for a complete reference!
+#
+# This config file uses keycodes (bindsym) and was written for the QWERTY
+# layout.
+#
+# To get a config file with the same key positions, but for your current
+# layout, use the i3-config-wizard
+#
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango:DejaVu Sans Mono 8
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn’t scale on retina/hidpi displays.
+
+# use these keys for focus, movement, and resize directions when reaching for
+# the arrows is not convenient
+set $up l
+set $down k
+set $left j
+set $right semicolon
+
+# use Mouse+Mod1 to drag floating windows to their wanted position
floating_modifier Mod1
-# Fullscreen (Mod1+f)
-bind Mod1+41 f
-
-# Stacking (Mod1+h)
-bind Mod1+43 s
-
-# Tabbed (Mod1+w)
-bind Mod1+25 T
-
-# Default (Mod1+e)
-bind Mod1+26 d
-
-# Toggle tiling/floating of the current window (Mod1+Shift+Space)
-bind Mod1+Shift+65 t
-
-# Go into the tiling layer / floating layer, depending on whether
-# the current window is tiling / floating (Mod1+t)
-bind Mod1+28 focus ft
-
-# Focus (Mod1+j/k/l/;)
-bind Mod1+44 h
-bind Mod1+45 j
-bind Mod1+46 k
-bind Mod1+47 l
-# (alternatively, you can use the cursor keys:)
-bindsym Mod1+Left h
-bindsym Mod1+Down j
-bindsym Mod1+Up k
-bindsym Mod1+Right l
-
-# Focus Container (Mod3+j/k/l/;)
-bind Mod3+44 wch
-bind Mod3+45 wcj
-bind Mod3+46 wck
-bind Mod3+47 wcl
-# (alternatively, you can use the cursor keys:)
-bindsym Mod3+Left wch
-bindsym Mod3+Down wcj
-bindsym Mod3+Up wck
-bindsym Mod3+Right wcl
-
-# Snap (Mod1+Control+j/k/l/;)
-bind Mod1+Control+44 sh
-bind Mod1+Control+45 sj
-bind Mod1+Control+46 sk
-bind Mod1+Control+47 sl
-# (alternatively, you can use the cursor keys:)
-bindsym Mod1+Control+Left sh
-bindsym Mod1+Control+Down sj
-bindsym Mod1+Control+Up sk
-bindsym Mod1+Control+Right sl
-
-# Move (Mod1+Shift+j/k/l/;)
-bind Mod1+Shift+44 mh
-bind Mod1+Shift+45 mj
-bind Mod1+Shift+46 mk
-bind Mod1+Shift+47 ml
-# (alternatively, you can use the cursor keys:)
-bindsym Mod1+Shift+Left mh
-bindsym Mod1+Shift+Down mj
-bindsym Mod1+Shift+Up mk
-bindsym Mod1+Shift+Right ml
-
-# Move Container (Mod3+Shift+j/k/l/;)
-bind Mod3+Shift+44 wcmh
-bind Mod3+Shift+45 wcmj
-bind Mod3+Shift+46 wcmk
-bind Mod3+Shift+47 wcml
-
-# Workspaces (Mod1+1/2/…)
-bind Mod1+10 1
-bind Mod1+11 2
-bind Mod1+12 3
-bind Mod1+13 4
-bind Mod1+14 5
-bind Mod1+15 6
-bind Mod1+16 7
-bind Mod1+17 8
-bind Mod1+18 9
-bind Mod1+19 10
-
-# Move to Workspaces
-bind Mod1+Shift+10 m1
-bind Mod1+Shift+11 m2
-bind Mod1+Shift+12 m3
-bind Mod1+Shift+13 m4
-bind Mod1+Shift+14 m5
-bind Mod1+Shift+15 m6
-bind Mod1+Shift+16 m7
-bind Mod1+Shift+17 m8
-bind Mod1+Shift+18 m9
-bind Mod1+Shift+19 m10
-
-# Mod1+Enter starts a new terminal
-bind Mod1+36 exec /usr/bin/urxvt
-
-# Mod1+Shift+q kills the current client
-bind Mod1+Shift+24 kill
-
-# Mod1+v starts dmenu and launches the selected application
-# for now, we don’t have a launcher of our own.
-bind Mod1+55 exec /usr/bin/dmenu_run
-
-# Mod1+Shift+e exits i3
-bind Mod1+Shift+26 exit
-
-# Mod1+Shift+r restarts i3 inplace
-bind Mod1+Shift+27 restart
-
-# The IPC interface allows programs like an external workspace bar
-# (i3-wsbar) or i3-msg (can be used to "remote-control" i3) to work.
-ipc-socket ~/.i3/ipc.sock
-
-#############################################################
-# DELETE THE FOLLOWING LINES TO DISABLE THE WELCOME MESSAGE #
-#############################################################
-exec xmessage -file /etc/i3/welcome
+# start a terminal
+bindsym Mod1+Return exec i3-sensible-terminal
+
+# kill focused window
+bindsym Mod1+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym Mod1+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym Mod1+$left focus left
+bindsym Mod1+$down focus down
+bindsym Mod1+$up focus up
+bindsym Mod1+$right focus right
+
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Left focus left
+bindsym Mod1+Down focus down
+bindsym Mod1+Up focus up
+bindsym Mod1+Right focus right
+
+# move focused window
+bindsym Mod1+Shift+$left move left
+bindsym Mod1+Shift+$down move down
+bindsym Mod1+Shift+$up move up
+bindsym Mod1+Shift+$right move right
+
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Shift+Left move left
+bindsym Mod1+Shift+Down move down
+bindsym Mod1+Shift+Up move up
+bindsym Mod1+Shift+Right move right
+
+# split in horizontal orientation
+bindsym Mod1+h split h
+
+# split in vertical orientation
+bindsym Mod1+v split v
+
+# enter fullscreen mode for the focused container
+bindsym Mod1+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym Mod1+s layout stacking
+bindsym Mod1+w layout tabbed
+bindsym Mod1+e layout toggle split
+
+# toggle tiling / floating
+bindsym Mod1+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym Mod1+space focus mode_toggle
+
+# focus the parent container
+bindsym Mod1+a focus parent
+
+# focus the child container
+#bindsym Mod1+d focus child
+
+# move the currently focused window to the scratchpad
+bindsym Mod1+Shift+minus move scratchpad
+
+# Show the next scratchpad window or hide the focused scratchpad window.
+# If there are multiple scratchpad windows, this command cycles through them.
+bindsym Mod1+minus scratchpad show
+
+# switch to workspace
+bindsym Mod1+1 workspace 1
+bindsym Mod1+2 workspace 2
+bindsym Mod1+3 workspace 3
+bindsym Mod1+4 workspace 4
+bindsym Mod1+5 workspace 5
+bindsym Mod1+6 workspace 6
+bindsym Mod1+7 workspace 7
+bindsym Mod1+8 workspace 8
+bindsym Mod1+9 workspace 9
+bindsym Mod1+0 workspace 10
+
+# move focused container to workspace
+bindsym Mod1+Shift+1 move container to workspace 1
+bindsym Mod1+Shift+2 move container to workspace 2
+bindsym Mod1+Shift+3 move container to workspace 3
+bindsym Mod1+Shift+4 move container to workspace 4
+bindsym Mod1+Shift+5 move container to workspace 5
+bindsym Mod1+Shift+6 move container to workspace 6
+bindsym Mod1+Shift+7 move container to workspace 7
+bindsym Mod1+Shift+8 move container to workspace 8
+bindsym Mod1+Shift+9 move container to workspace 9
+bindsym Mod1+Shift+0 move container to workspace 10
+
+# reload the configuration file
+bindsym Mod1+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym Mod1+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+ # These bindings trigger as soon as you enter the resize mode
+
+ # Pressing left will shrink the window’s width.
+ # Pressing right will grow the window’s width.
+ # Pressing up will shrink the window’s height.
+ # Pressing down will grow the window’s height.
+ bindsym $left resize shrink width 10 px or 10 ppt
+ bindsym $down resize grow height 10 px or 10 ppt
+ bindsym $up resize shrink height 10 px or 10 ppt
+ bindsym $right resize grow width 10 px or 10 ppt
+
+ # same bindings, but for the arrow keys
+ bindsym Left resize shrink width 10 px or 10 ppt
+ bindsym Down resize grow height 10 px or 10 ppt
+ bindsym Up resize shrink height 10 px or 10 ppt
+ bindsym Right resize grow width 10 px or 10 ppt
+
+ # back to normal: Enter or Escape
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+
+bindsym Mod1+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+ status_command i3status
+}
+
+#######################################################################
+# automatically start i3-config-wizard to offer the user to create a
+# keysym-based config which used his favorite modifier (alt or windows)
+#
+# i3-config-wizard will not launch if there already is a config file
+# in ~/.i3/config.
+#
+# Please remove the following exec line:
+#######################################################################
+exec i3-config-wizard
projects / i3 / i3 / blobdiff