* vim:ts=4:sw=4:expandtab
*
* i3 - an improved dynamic tiling window manager
- * © 2009-2012 Michael Stapelberg and contributors (see also: LICENSE)
+ * © 2009 Michael Stapelberg and contributors (see also: LICENSE)
*
* include/config.h: Contains all structs/variables for the configurable
* part of i3 as well as functions handling the configuration file (calling
* bindings mode).
*
*/
-#ifndef I3_CONFIG_H
-#define I3_CONFIG_H
+#pragma once
#include <stdbool.h>
#include "queue.h"
char *ipc_socket_path;
const char *restart_state_path;
- int default_layout;
+ layout_t default_layout;
int container_stack_limit;
int container_stack_limit_value;
int default_border_width;
+ int default_floating_border_width;
/** Default orientation for new containers */
int default_orientation;
/** By default, focus follows mouse. If the user explicitly wants to
* turn this off (and instead rely only on the keyboard for changing
- * focus), we allow him to do this with this relatively special option.
+ * focus), we allow them to do this with this relatively special option.
* It is not planned to add any different focus models. */
bool disable_focus_follows_mouse;
+ /** By default, when switching focus to a window on a different output
+ * (e.g. focusing a window on workspace 3 on output VGA-1, coming from
+ * workspace 2 on LVDS-1), the mouse cursor is warped to the center of
+ * that window.
+ *
+ * With the mouse_warping option, you can control when the mouse cursor
+ * should be warped. "none" disables warping entirely, whereas "output"
+ * is the default behavior described above. */
+ warping_t mouse_warping;
+
/** Remove borders if they are adjacent to the screen edge.
* This is useful if you are reaching scrollbar on the edge of the
* screen or do not want to waste a single pixel of displayspace.
* flag can be delayed using an urgency timer. */
float workspace_urgency_timer;
+ /** Use a timer to delay exiting when no output is available.
+ * This can prevent i3 from exiting when all outputs disappear momentarily. */
+ float zero_disp_exit_timer_ms;
+
+ /** Behavior when a window sends a NET_ACTIVE_WINDOW message. */
+ enum {
+ /* Focus if the target workspace is visible, set urgency hint otherwise. */
+ FOWA_SMART,
+ /* Always set the urgency hint. */
+ FOWA_URGENT,
+ /* Always focus the window. */
+ FOWA_FOCUS,
+ /* Ignore the request (no focus, no urgency hint). */
+ FOWA_NONE
+ } focus_on_window_activation;
+
+ /** Specifies whether or not marks should be displayed in the window
+ * decoration. Marks starting with a "_" will be ignored either way. */
+ bool show_marks;
+
/** The default border style for new windows. */
border_style_t default_border;
struct Colortriple focused_inactive;
struct Colortriple unfocused;
struct Colortriple urgent;
+ struct Colortriple placeholder;
} client;
struct config_bar {
struct Colortriple focused;
/* just ignore the popup, that is, don’t map it */
PDF_IGNORE = 2,
} popup_during_fullscreen;
+
+ /* The number of currently parsed barconfigs */
+ int number_barconfigs;
};
/**
* root window! */
char *socket_path;
- /** Bar display mode (hide unless modifier is pressed or show in dock mode) */
- enum { M_DOCK = 0, M_HIDE = 1 } mode;
+ /** Bar display mode (hide unless modifier is pressed or show in dock mode or always hide in invisible mode) */
+ enum { M_DOCK = 0,
+ M_HIDE = 1,
+ M_INVISIBLE = 2 } mode;
+
+ /* The current hidden_state of the bar, which indicates whether it is hidden or shown */
+ enum { S_HIDE = 0,
+ S_SHOW = 1 } hidden_state;
/** Bar modifier (to show bar when in hide mode). */
enum {
M_MOD5 = 7
} modifier;
+ /** Command that should be run when mouse wheel up button is pressed over
+ * i3bar to override the default behavior. */
+ char *wheel_up_cmd;
+
+ /** Command that should be run when mouse wheel down button is pressed over
+ * i3bar to override the default behavior. */
+ char *wheel_down_cmd;
+
/** Bar position (bottom by default). */
- enum { P_BOTTOM = 0, P_TOP = 1 } position;
+ enum { P_BOTTOM = 0,
+ P_TOP = 1 } position;
/** Command that should be run to execute i3bar, give a full path if i3bar is not
* in your $PATH.
/** Font specification for all text rendered on the bar. */
char *font;
+ /** A custom separator to use instead of a vertical line. */
+ char *separator_symbol;
+
/** Hide workspace buttons? Configuration option is 'workspace_buttons no'
* but we invert the bool to get the correct default when initializing with
* zero. */
bool hide_workspace_buttons;
+ /** Strip workspace numbers? Configuration option is
+ * 'strip_workspace_numbers yes'. */
+ bool strip_workspace_numbers;
+
+ /** Hide mode button? Configuration option is 'binding_mode_indicator no'
+ * but we invert the bool for the same reason as hide_workspace_buttons.*/
+ bool hide_binding_mode_indicator;
+
/** Enable verbose mode? Useful for debugging purposes. */
bool verbose;
};
/**
- * Reads the configuration from ~/.i3/config or /etc/i3/config if not found.
+ * Finds the configuration file to use (either the one specified by
+ * override_configpath), the user’s one or the system default) and calls
+ * parse_file().
*
* If you specify override_configpath, only this path is used to look for a
* configuration file.
*
+ * If use_nagbar is false, don't try to start i3-nagbar but log the errors to
+ * stdout/stderr instead.
+ *
*/
-void load_configuration(xcb_connection_t *conn, const char *override_configfile, bool reload);
+bool parse_configuration(const char *override_configpath, bool use_nagbar);
/**
- * Translates keysymbols to keycodes for all bindings which use keysyms.
+ * Reads the configuration from ~/.i3/config or /etc/i3/config if not found.
+ *
+ * If you specify override_configpath, only this path is used to look for a
+ * configuration file.
*
*/
-void translate_keysyms(void);
+void load_configuration(xcb_connection_t *conn, const char *override_configfile, bool reload);
/**
* Ungrabs all keys, to be called before re-grabbing the keys because of a
void ungrab_all_keys(xcb_connection_t *conn);
/**
- * Grab the bound keys (tell X to send us keypress events for those keycodes)
- *
- */
-void grab_all_keys(xcb_connection_t *conn, bool bind_mode_switch);
-
-/**
- * Switches the key bindings to the given mode, if the mode exists
+ * Sends the current bar configuration as an event to all barconfig_update listeners.
*
*/
-void switch_mode(const char *new_mode);
-
-/**
- * Returns a pointer to the Binding with the specified modifiers and keycode
- * or NULL if no such binding exists.
- *
- */
-Binding *get_binding(uint16_t modifiers, bool key_release, xcb_keycode_t keycode);
+void update_barconfig();
/**
* Kills the configerror i3-nagbar process, if any.
*
*/
void kill_configerror_nagbar(bool wait_for_it);
-
-#endif
projects / i3 / i3 / blobdiff