* vim:ts=4:sw=4:expandtab
*
* i3 - an improved dynamic tiling window manager
- * © 2009-2012 Michael Stapelberg and contributors (see also: LICENSE)
+ * © 2009-2013 Michael Stapelberg and contributors (see also: LICENSE)
*
* config_parser.c: hand-written parser to parse configuration directives.
*
* See also src/commands_parser.c for rationale on why we use a custom parser.
*
+ * This parser works VERY MUCH like src/commands_parser.c, so read that first.
+ * The differences are:
+ *
+ * 1. config_parser supports the 'number' token type (in addition to 'word' and
+ * 'string'). Numbers are referred to using &num (like $str).
+ *
+ * 2. Criteria are not executed immediately, they are just stored.
+ *
+ * 3. config_parser recognizes \n and \r as 'end' token, while commands_parser
+ * ignores them.
+ *
+ * 4. config_parser skips the current line on invalid inputs and follows the
+ * nearest <error> token.
+ *
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdbool.h>
#include <stdint.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/stat.h>
+#include <fcntl.h>
#include "all.h"
// Macros to make the YAJL API a bit easier to use.
-#define y(x, ...) yajl_gen_ ## x (command_output.json_gen, ##__VA_ARGS__)
-#define ystr(str) yajl_gen_string(command_output.json_gen, (unsigned char*)str, strlen(str))
+#define y(x, ...) yajl_gen_##x(command_output.json_gen, ##__VA_ARGS__)
+#define ystr(str) yajl_gen_string(command_output.json_gen, (unsigned char *)str, strlen(str))
+
+#ifndef TEST_PARSER
+pid_t config_error_nagbar_pid = -1;
+static struct context *context;
+#endif
/*******************************************************************************
* The data structures used for parsing. Essentially the current state and a
struct stack_entry {
/* Just a pointer, not dynamically allocated. */
const char *identifier;
- char *str;
+ enum {
+ STACK_STR = 0,
+ STACK_LONG = 1,
+ } type;
+ union {
+ char *str;
+ long num;
+ } val;
};
/* 10 entries should be enough for everybody. */
* single array, since the number of entries we have to store is very small.
*
*/
-static void push_string(const char *identifier, char *str) {
+static void push_string(const char *identifier, const char *str) {
for (int c = 0; c < 10; c++) {
if (stack[c].identifier != NULL &&
- strcmp(stack[c].identifier, identifier) != 0)
+ strcmp(stack[c].identifier, identifier) != 0)
+ continue;
+ if (stack[c].identifier == NULL) {
+ /* Found a free slot, let’s store it here. */
+ stack[c].identifier = identifier;
+ stack[c].val.str = sstrdup(str);
+ stack[c].type = STACK_STR;
+ } else {
+ /* Append the value. */
+ char *prev = stack[c].val.str;
+ sasprintf(&(stack[c].val.str), "%s,%s", prev, str);
+ free(prev);
+ }
+ return;
+ }
+
+ /* When we arrive here, the stack is full. This should not happen and
+ * means there’s either a bug in this parser or the specification
+ * contains a command with more than 10 identified tokens. */
+ fprintf(stderr, "BUG: commands_parser stack full. This means either a bug "
+ "in the code, or a new command which contains more than "
+ "10 identified tokens.\n");
+ exit(1);
+}
+
+static void push_long(const char *identifier, long num) {
+ for (int c = 0; c < 10; c++) {
+ if (stack[c].identifier != NULL)
continue;
- if (stack[c].identifier == NULL) {
- /* Found a free slot, let’s store it here. */
- stack[c].identifier = identifier;
- stack[c].str = str;
- } else {
- /* Append the value. */
- sasprintf(&(stack[c].str), "%s,%s", stack[c].str, str);
- }
+ /* Found a free slot, let’s store it here. */
+ stack[c].identifier = identifier;
+ stack[c].val.num = num;
+ stack[c].type = STACK_LONG;
return;
}
exit(1);
}
-// XXX: ideally, this would be const char. need to check if that works with all
-// called functions.
-static char *get_string(const char *identifier) {
+static const char *get_string(const char *identifier) {
for (int c = 0; c < 10; c++) {
if (stack[c].identifier == NULL)
break;
if (strcmp(identifier, stack[c].identifier) == 0)
- return stack[c].str;
+ return stack[c].val.str;
}
return NULL;
}
+static long get_long(const char *identifier) {
+ for (int c = 0; c < 10; c++) {
+ if (stack[c].identifier == NULL)
+ break;
+ if (strcmp(identifier, stack[c].identifier) == 0)
+ return stack[c].val.num;
+ }
+ return 0;
+}
+
static void clear_stack(void) {
for (int c = 0; c < 10; c++) {
- if (stack[c].str != NULL)
- free(stack[c].str);
+ if (stack[c].type == STACK_STR && stack[c].val.str != NULL)
+ free(stack[c].val.str);
stack[c].identifier = NULL;
- stack[c].str = NULL;
+ stack[c].val.str = NULL;
+ stack[c].val.num = 0;
}
}
******************************************************************************/
static cmdp_state state;
-#ifndef TEST_PARSER
static Match current_match;
-#endif
-static struct CommandResult subcommand_output;
-static struct CommandResult command_output;
+static struct ConfigResultIR subcommand_output;
+static struct ConfigResultIR command_output;
-#include "GENERATED_config_call.h"
+/* A list which contains the states that lead to the current state, e.g.
+ * INITIAL, WORKSPACE_LAYOUT.
+ * When jumping back to INITIAL, statelist_idx will simply be set to 1
+ * (likewise for other states, e.g. MODE or BAR).
+ * This list is used to process the nearest error token. */
+static cmdp_state statelist[10] = {INITIAL};
+/* NB: statelist_idx points to where the next entry will be inserted */
+static int statelist_idx = 1;
+#include "GENERATED_config_call.h"
static void next_state(const cmdp_token *token) {
- //printf("token = name %s identifier %s\n", token->name, token->identifier);
- //printf("next_state = %d\n", token->next_state);
+ cmdp_state _next_state = token->next_state;
+
+ //printf("token = name %s identifier %s\n", token->name, token->identifier);
+ //printf("next_state = %d\n", token->next_state);
if (token->next_state == __CALL) {
subcommand_output.json_gen = command_output.json_gen;
- subcommand_output.needs_tree_render = false;
GENERATED_call(token->extra.call_identifier, &subcommand_output);
- /* If any subcommand requires a tree_render(), we need to make the
- * whole parser result request a tree_render(). */
- if (subcommand_output.needs_tree_render)
- command_output.needs_tree_render = true;
+ _next_state = subcommand_output.next_state;
clear_stack();
- return;
}
- state = token->next_state;
+ state = _next_state;
if (state == INITIAL) {
clear_stack();
}
+
+ /* See if we are jumping back to a state in which we were in previously
+ * (statelist contains INITIAL) and just move statelist_idx accordingly. */
+ for (int i = 0; i < statelist_idx; i++) {
+ if (statelist[i] != _next_state)
+ continue;
+ statelist_idx = i + 1;
+ return;
+ }
+
+ /* Otherwise, the state is new and we add it to the list */
+ statelist[statelist_idx++] = _next_state;
}
-struct CommandResult *parse_config(const char *input) {
- DLOG("COMMAND: *%s*\n", input);
+/*
+ * Returns a pointer to the start of the line (one byte after the previous \r,
+ * \n) or the start of the input, if this is the first line.
+ *
+ */
+static const char *start_of_line(const char *walk, const char *beginning) {
+ while (*walk != '\n' && *walk != '\r' && walk >= beginning) {
+ walk--;
+ }
+
+ return walk + 1;
+}
+
+/*
+ * Copies the line and terminates it at the next \n, if any.
+ *
+ * The caller has to free() the result.
+ *
+ */
+static char *single_line(const char *start) {
+ char *result = sstrdup(start);
+ char *end = strchr(result, '\n');
+ if (end != NULL)
+ *end = '\0';
+ return result;
+}
+
+struct ConfigResultIR *parse_config(const char *input, struct context *context) {
+ /* Dump the entire config file into the debug log. We cannot just use
+ * DLOG("%s", input); because one log message must not exceed 4 KiB. */
+ const char *dumpwalk = input;
+ int linecnt = 1;
+ while (*dumpwalk != '\0') {
+ char *next_nl = strchr(dumpwalk, '\n');
+ if (next_nl != NULL) {
+ DLOG("CONFIG(line %3d): %.*s\n", linecnt, (int)(next_nl - dumpwalk), dumpwalk);
+ dumpwalk = next_nl + 1;
+ } else {
+ DLOG("CONFIG(line %3d): %s\n", linecnt, dumpwalk);
+ break;
+ }
+ linecnt++;
+ }
state = INITIAL;
+ statelist_idx = 1;
-/* A YAJL JSON generator used for formatting replies. */
-#if YAJL_MAJOR >= 2
+ /* A YAJL JSON generator used for formatting replies. */
command_output.json_gen = yajl_gen_alloc(NULL);
-#else
- command_output.json_gen = yajl_gen_alloc(NULL, NULL);
-#endif
y(array_open);
- command_output.needs_tree_render = false;
const char *walk = input;
const size_t len = strlen(input);
int c;
const cmdp_token *token;
bool token_handled;
+ linecnt = 1;
- // TODO: make this testable
+// TODO: make this testable
#ifndef TEST_PARSER
- cmd_criteria_init(¤t_match, &subcommand_output);
+ cfg_criteria_init(¤t_match, &subcommand_output, INITIAL);
#endif
/* The "<=" operator is intentional: We also handle the terminating 0-byte
* explicitly by looking for an 'end' token. */
- while ((walk - input) <= len) {
- /* skip whitespace and newlines before every token */
- while ((*walk == ' ' || *walk == '\t' ||
- *walk == '\r' || *walk == '\n') && *walk != '\0')
+ while ((size_t)(walk - input) <= len) {
+ /* Skip whitespace before every token, newlines are relevant since they
+ * separate configuration directives. */
+ while ((*walk == ' ' || *walk == '\t') && *walk != '\0')
walk++;
- //printf("remaining input: %s\n", walk);
+ //printf("remaining input: %s\n", walk);
cmdp_token_ptr *ptr = &(tokens[state]);
token_handled = false;
if (token->name[0] == '\'') {
if (strncasecmp(walk, token->name + 1, strlen(token->name) - 1) == 0) {
if (token->identifier != NULL)
- push_string(token->identifier, sstrdup(token->name + 1));
+ push_string(token->identifier, token->name + 1);
walk += strlen(token->name) - 1;
next_state(token);
token_handled = true;
continue;
}
+ if (strcmp(token->name, "number") == 0) {
+ /* Handle numbers. We only accept decimal numbers for now. */
+ char *end = NULL;
+ errno = 0;
+ long int num = strtol(walk, &end, 10);
+ if ((errno == ERANGE && (num == LONG_MIN || num == LONG_MAX)) ||
+ (errno != 0 && num == 0))
+ continue;
+
+ /* No valid numbers found */
+ if (end == walk)
+ continue;
+
+ if (token->identifier != NULL)
+ push_long(token->identifier, num);
+
+ /* Set walk to the first non-number character */
+ walk = end;
+ next_state(token);
+ token_handled = true;
+ break;
+ }
+
if (strcmp(token->name, "string") == 0 ||
strcmp(token->name, "word") == 0) {
const char *beginning = walk;
if (*walk == '"') {
beginning++;
walk++;
- while (*walk != '\0' && (*walk != '"' || *(walk-1) == '\\'))
+ while (*walk != '\0' && (*walk != '"' || *(walk - 1) == '\\'))
walk++;
} else {
if (token->name[0] == 's') {
- /* For a string (starting with 's'), the delimiters are
- * comma (,) and semicolon (;) which introduce a new
- * operation or command, respectively. Also, newlines
- * end a command. */
- while (*walk != ';' && *walk != ',' &&
- *walk != '\0' && *walk != '\r' &&
- *walk != '\n')
+ while (*walk != '\0' && *walk != '\r' && *walk != '\n')
walk++;
} else {
/* For a word, the delimiters are white space (' ' or
* semicolon (;). */
while (*walk != ' ' && *walk != '\t' &&
*walk != ']' && *walk != ',' &&
- *walk != ';' && *walk != '\r' &&
+ *walk != ';' && *walk != '\r' &&
*walk != '\n' && *walk != '\0')
walk++;
}
}
if (walk != beginning) {
- char *str = scalloc(walk-beginning + 1);
+ char *str = scalloc(walk - beginning + 1);
/* We copy manually to handle escaping of characters. */
int inpos, outpos;
for (inpos = 0, outpos = 0;
- inpos < (walk-beginning);
+ inpos < (walk - beginning);
inpos++, outpos++) {
/* We only handle escaped double quotes to not break
* backwards compatibility with people using \w in
* regular expressions etc. */
- if (beginning[inpos] == '\\' && beginning[inpos+1] == '"')
+ if (beginning[inpos] == '\\' && beginning[inpos + 1] == '"')
inpos++;
str[outpos] = beginning[inpos];
}
if (token->identifier)
push_string(token->identifier, str);
+ free(str);
/* If we are at the end of a quoted string, skip the ending
* double quote. */
if (*walk == '"')
}
}
+ if (strcmp(token->name, "line") == 0) {
+ while (*walk != '\0' && *walk != '\n' && *walk != '\r')
+ walk++;
+ next_state(token);
+ token_handled = true;
+ linecnt++;
+ walk++;
+ break;
+ }
+
if (strcmp(token->name, "end") == 0) {
- if (*walk == '\0' || *walk == ',' || *walk == ';') {
+ //printf("checking for end: *%s*\n", walk);
+ if (*walk == '\0' || *walk == '\n' || *walk == '\r') {
next_state(token);
token_handled = true;
- /* To make sure we start with an appropriate matching
+/* To make sure we start with an appropriate matching
* datastructure for commands which do *not* specify any
* criteria, we re-initialize the criteria system after
* every command. */
- // TODO: make this testable
+// TODO: make this testable
#ifndef TEST_PARSER
- if (*walk == '\0' || *walk == ';')
- cmd_criteria_init(¤t_match, &subcommand_output);
+ cfg_criteria_init(¤t_match, &subcommand_output, INITIAL);
#endif
+ linecnt++;
walk++;
break;
- }
- }
+ }
+ }
}
if (!token_handled) {
tokenwalk += strlen(token->name + 1);
*tokenwalk++ = '\'';
} else {
+ /* Skip error tokens in error messages, they are used
+ * internally only and might confuse users. */
+ if (strcmp(token->name, "error") == 0)
+ continue;
/* Any other token is copied to the error message enclosed
* with angle brackets. */
*tokenwalk++ = '<';
possible_tokens);
free(possible_tokens);
+ /* Go back to the beginning of the line */
+ const char *error_line = start_of_line(walk, input);
+
/* Contains the same amount of characters as 'input' has, but with
* the unparseable part highlighted using ^ characters. */
- char *position = smalloc(len + 1);
- for (const char *copywalk = input; *copywalk != '\0'; copywalk++)
- position[(copywalk - input)] = (copywalk >= walk ? '^' : ' ');
- position[len] = '\0';
+ char *position = scalloc(strlen(error_line) + 1);
+ const char *copywalk;
+ for (copywalk = error_line;
+ *copywalk != '\n' && *copywalk != '\r' && *copywalk != '\0';
+ copywalk++)
+ position[(copywalk - error_line)] = (copywalk >= walk ? '^' : (*copywalk == '\t' ? '\t' : ' '));
+ position[(copywalk - error_line)] = '\0';
- ELOG("%s\n", errormessage);
- ELOG("Your command: %s\n", input);
- ELOG(" %s\n", position);
+ ELOG("CONFIG: %s\n", errormessage);
+ ELOG("CONFIG: (in file %s)\n", context->filename);
+ char *error_copy = single_line(error_line);
+
+ /* Print context lines *before* the error, if any. */
+ if (linecnt > 1) {
+ const char *context_p1_start = start_of_line(error_line - 2, input);
+ char *context_p1_line = single_line(context_p1_start);
+ if (linecnt > 2) {
+ const char *context_p2_start = start_of_line(context_p1_start - 2, input);
+ char *context_p2_line = single_line(context_p2_start);
+ ELOG("CONFIG: Line %3d: %s\n", linecnt - 2, context_p2_line);
+ free(context_p2_line);
+ }
+ ELOG("CONFIG: Line %3d: %s\n", linecnt - 1, context_p1_line);
+ free(context_p1_line);
+ }
+ ELOG("CONFIG: Line %3d: %s\n", linecnt, error_copy);
+ ELOG("CONFIG: %s\n", position);
+ free(error_copy);
+ /* Print context lines *after* the error, if any. */
+ for (int i = 0; i < 2; i++) {
+ char *error_line_end = strchr(error_line, '\n');
+ if (error_line_end != NULL && *(error_line_end + 1) != '\0') {
+ error_line = error_line_end + 1;
+ error_copy = single_line(error_line);
+ ELOG("CONFIG: Line %3d: %s\n", linecnt + i + 1, error_copy);
+ free(error_copy);
+ }
+ }
+
+ context->has_errors = true;
/* Format this error message as a JSON reply. */
y(map_open);
ystr(position);
y(map_close);
+ /* Skip the rest of this line, but continue parsing. */
+ while ((size_t)(walk - input) <= len && *walk != '\n')
+ walk++;
+
free(position);
free(errormessage);
clear_stack();
- break;
+
+ /* To figure out in which state to go (e.g. MODE or INITIAL),
+ * we find the nearest state which contains an <error> token
+ * and follow that one. */
+ bool error_token_found = false;
+ for (int i = statelist_idx - 1; (i >= 0) && !error_token_found; i--) {
+ cmdp_token_ptr *errptr = &(tokens[statelist[i]]);
+ for (int j = 0; j < errptr->n; j++) {
+ if (strcmp(errptr->array[j].name, "error") != 0)
+ continue;
+ next_state(&(errptr->array[j]));
+ error_token_found = true;
+ break;
+ }
+ }
+
+ assert(error_token_found);
}
}
va_end(args);
}
+static int criteria_next_state;
+
+void cfg_criteria_init(I3_CFG, int _state) {
+ criteria_next_state = _state;
+}
+
+void cfg_criteria_add(I3_CFG, const char *ctype, const char *cvalue) {
+}
+
+void cfg_criteria_pop_state(I3_CFG) {
+ result->next_state = criteria_next_state;
+}
+
int main(int argc, char *argv[]) {
if (argc < 2) {
fprintf(stderr, "Syntax: %s <command>\n", argv[0]);
return 1;
}
- parse_config(argv[1]);
+ struct context context;
+ context.filename = "<stdin>";
+ parse_config(argv[1], &context);
}
+
+#else
+
+/*
+ * Goes through each line of buf (separated by \n) and checks for statements /
+ * commands which only occur in i3 v4 configuration files. If it finds any, it
+ * returns version 4, otherwise it returns version 3.
+ *
+ */
+static int detect_version(char *buf) {
+ char *walk = buf;
+ char *line = buf;
+ while (*walk != '\0') {
+ if (*walk != '\n') {
+ walk++;
+ continue;
+ }
+
+ /* check for some v4-only statements */
+ if (strncasecmp(line, "bindcode", strlen("bindcode")) == 0 ||
+ strncasecmp(line, "force_focus_wrapping", strlen("force_focus_wrapping")) == 0 ||
+ strncasecmp(line, "# i3 config file (v4)", strlen("# i3 config file (v4)")) == 0 ||
+ strncasecmp(line, "workspace_layout", strlen("workspace_layout")) == 0) {
+ LOG("deciding for version 4 due to this line: %.*s\n", (int)(walk - line), line);
+ return 4;
+ }
+
+ /* if this is a bind statement, we can check the command */
+ if (strncasecmp(line, "bind", strlen("bind")) == 0) {
+ char *bind = strchr(line, ' ');
+ if (bind == NULL)
+ goto next;
+ while ((*bind == ' ' || *bind == '\t') && *bind != '\0')
+ bind++;
+ if (*bind == '\0')
+ goto next;
+ if ((bind = strchr(bind, ' ')) == NULL)
+ goto next;
+ while ((*bind == ' ' || *bind == '\t') && *bind != '\0')
+ bind++;
+ if (*bind == '\0')
+ goto next;
+ if (strncasecmp(bind, "layout", strlen("layout")) == 0 ||
+ strncasecmp(bind, "floating", strlen("floating")) == 0 ||
+ strncasecmp(bind, "workspace", strlen("workspace")) == 0 ||
+ strncasecmp(bind, "focus left", strlen("focus left")) == 0 ||
+ strncasecmp(bind, "focus right", strlen("focus right")) == 0 ||
+ strncasecmp(bind, "focus up", strlen("focus up")) == 0 ||
+ strncasecmp(bind, "focus down", strlen("focus down")) == 0 ||
+ strncasecmp(bind, "border normal", strlen("border normal")) == 0 ||
+ strncasecmp(bind, "border 1pixel", strlen("border 1pixel")) == 0 ||
+ strncasecmp(bind, "border pixel", strlen("border pixel")) == 0 ||
+ strncasecmp(bind, "border borderless", strlen("border borderless")) == 0 ||
+ strncasecmp(bind, "--no-startup-id", strlen("--no-startup-id")) == 0 ||
+ strncasecmp(bind, "bar", strlen("bar")) == 0) {
+ LOG("deciding for version 4 due to this line: %.*s\n", (int)(walk - line), line);
+ return 4;
+ }
+ }
+
+ next:
+ /* advance to the next line */
+ walk++;
+ line = walk;
+ }
+
+ return 3;
+}
+
+/*
+ * Calls i3-migrate-config-to-v4 to migrate a configuration file (input
+ * buffer).
+ *
+ * Returns the converted config file or NULL if there was an error (for
+ * example the script could not be found in $PATH or the i3 executable’s
+ * directory).
+ *
+ */
+static char *migrate_config(char *input, off_t size) {
+ int writepipe[2];
+ int readpipe[2];
+
+ if (pipe(writepipe) != 0 ||
+ pipe(readpipe) != 0) {
+ warn("migrate_config: Could not create pipes");
+ return NULL;
+ }
+
+ pid_t pid = fork();
+ if (pid == -1) {
+ warn("Could not fork()");
+ return NULL;
+ }
+
+ /* child */
+ if (pid == 0) {
+ /* close writing end of writepipe, connect reading side to stdin */
+ close(writepipe[1]);
+ dup2(writepipe[0], 0);
+
+ /* close reading end of readpipe, connect writing side to stdout */
+ close(readpipe[0]);
+ dup2(readpipe[1], 1);
+
+ static char *argv[] = {
+ NULL, /* will be replaced by the executable path */
+ NULL};
+ exec_i3_utility("i3-migrate-config-to-v4", argv);
+ }
+
+ /* parent */
+
+ /* close reading end of the writepipe (connected to the script’s stdin) */
+ close(writepipe[0]);
+
+ /* write the whole config file to the pipe, the script will read everything
+ * immediately */
+ int written = 0;
+ int ret;
+ while (written < size) {
+ if ((ret = write(writepipe[1], input + written, size - written)) < 0) {
+ warn("Could not write to pipe");
+ return NULL;
+ }
+ written += ret;
+ }
+ close(writepipe[1]);
+
+ /* close writing end of the readpipe (connected to the script’s stdout) */
+ close(readpipe[1]);
+
+ /* read the script’s output */
+ int conv_size = 65535;
+ char *converted = malloc(conv_size);
+ int read_bytes = 0;
+ do {
+ if (read_bytes == conv_size) {
+ conv_size += 65535;
+ converted = realloc(converted, conv_size);
+ }
+ ret = read(readpipe[0], converted + read_bytes, conv_size - read_bytes);
+ if (ret == -1) {
+ warn("Cannot read from pipe");
+ FREE(converted);
+ return NULL;
+ }
+ read_bytes += ret;
+ } while (ret > 0);
+
+ /* get the returncode */
+ int status;
+ wait(&status);
+ if (!WIFEXITED(status)) {
+ fprintf(stderr, "Child did not terminate normally, using old config file (will lead to broken behaviour)\n");
+ return NULL;
+ }
+
+ int returncode = WEXITSTATUS(status);
+ if (returncode != 0) {
+ fprintf(stderr, "Migration process exit code was != 0\n");
+ if (returncode == 2) {
+ fprintf(stderr, "could not start the migration script\n");
+ /* TODO: script was not found. tell the user to fix his system or create a v4 config */
+ } else if (returncode == 1) {
+ fprintf(stderr, "This already was a v4 config. Please add the following line to your config file:\n");
+ fprintf(stderr, "# i3 config file (v4)\n");
+ /* TODO: nag the user with a message to include a hint for i3 in his config file */
+ }
+ return NULL;
+ }
+
+ return converted;
+}
+
+/*
+ * Parses the given file by first replacing the variables, then calling
+ * parse_config and possibly launching i3-nagbar.
+ *
+ */
+void parse_file(const char *f) {
+ SLIST_HEAD(variables_head, Variable) variables = SLIST_HEAD_INITIALIZER(&variables);
+ int fd, ret, read_bytes = 0;
+ struct stat stbuf;
+ char *buf;
+ FILE *fstr;
+ char buffer[1026], key[512], value[512];
+
+ if ((fd = open(f, O_RDONLY)) == -1)
+ die("Could not open configuration file: %s\n", strerror(errno));
+
+ if (fstat(fd, &stbuf) == -1)
+ die("Could not fstat file: %s\n", strerror(errno));
+
+ buf = scalloc((stbuf.st_size + 1) * sizeof(char));
+ while (read_bytes < stbuf.st_size) {
+ if ((ret = read(fd, buf + read_bytes, (stbuf.st_size - read_bytes))) < 0)
+ die("Could not read(): %s\n", strerror(errno));
+ read_bytes += ret;
+ }
+
+ if (lseek(fd, 0, SEEK_SET) == (off_t)-1)
+ die("Could not lseek: %s\n", strerror(errno));
+
+ if ((fstr = fdopen(fd, "r")) == NULL)
+ die("Could not fdopen: %s\n", strerror(errno));
+
+ while (!feof(fstr)) {
+ if (fgets(buffer, 1024, fstr) == NULL) {
+ if (feof(fstr))
+ break;
+ die("Could not read configuration file\n");
+ }
+
+ /* sscanf implicitly strips whitespace. Also, we skip comments and empty lines. */
+ if (sscanf(buffer, "%s %[^\n]", key, value) < 1 ||
+ key[0] == '#' || strlen(key) < 3)
+ continue;
+
+ if (strcasecmp(key, "set") == 0) {
+ if (value[0] != '$') {
+ ELOG("Malformed variable assignment, name has to start with $\n");
+ continue;
+ }
+
+ /* get key/value for this variable */
+ char *v_key = value, *v_value;
+ if (strstr(value, " ") == NULL && strstr(value, "\t") == NULL) {
+ ELOG("Malformed variable assignment, need a value\n");
+ continue;
+ }
+
+ if (!(v_value = strstr(value, " ")))
+ v_value = strstr(value, "\t");
+
+ *(v_value++) = '\0';
+ while (*v_value == '\t' || *v_value == ' ')
+ v_value++;
+
+ struct Variable *new = scalloc(sizeof(struct Variable));
+ new->key = sstrdup(v_key);
+ new->value = sstrdup(v_value);
+ SLIST_INSERT_HEAD(&variables, new, variables);
+ DLOG("Got new variable %s = %s\n", v_key, v_value);
+ continue;
+ }
+ }
+ fclose(fstr);
+
+ /* For every custom variable, see how often it occurs in the file and
+ * how much extra bytes it requires when replaced. */
+ struct Variable *current, *nearest;
+ int extra_bytes = 0;
+ /* We need to copy the buffer because we need to invalidate the
+ * variables (otherwise we will count them twice, which is bad when
+ * 'extra' is negative) */
+ char *bufcopy = sstrdup(buf);
+ SLIST_FOREACH (current, &variables, variables) {
+ int extra = (strlen(current->value) - strlen(current->key));
+ char *next;
+ for (next = bufcopy;
+ next < (bufcopy + stbuf.st_size) &&
+ (next = strcasestr(next, current->key)) != NULL;
+ next += strlen(current->key)) {
+ *next = '_';
+ extra_bytes += extra;
+ }
+ }
+ FREE(bufcopy);
+
+ /* Then, allocate a new buffer and copy the file over to the new one,
+ * but replace occurences of our variables */
+ char *walk = buf, *destwalk;
+ char *new = smalloc((stbuf.st_size + extra_bytes + 1) * sizeof(char));
+ destwalk = new;
+ while (walk < (buf + stbuf.st_size)) {
+ /* Find the next variable */
+ SLIST_FOREACH (current, &variables, variables)
+ current->next_match = strcasestr(walk, current->key);
+ nearest = NULL;
+ int distance = stbuf.st_size;
+ SLIST_FOREACH (current, &variables, variables) {
+ if (current->next_match == NULL)
+ continue;
+ if ((current->next_match - walk) < distance) {
+ distance = (current->next_match - walk);
+ nearest = current;
+ }
+ }
+ if (nearest == NULL) {
+ /* If there are no more variables, we just copy the rest */
+ strncpy(destwalk, walk, (buf + stbuf.st_size) - walk);
+ destwalk += (buf + stbuf.st_size) - walk;
+ *destwalk = '\0';
+ break;
+ } else {
+ /* Copy until the next variable, then copy its value */
+ strncpy(destwalk, walk, distance);
+ strncpy(destwalk + distance, nearest->value, strlen(nearest->value));
+ walk += distance + strlen(nearest->key);
+ destwalk += distance + strlen(nearest->value);
+ }
+ }
+
+ /* analyze the string to find out whether this is an old config file (3.x)
+ * or a new config file (4.x). If it’s old, we run the converter script. */
+ int version = detect_version(buf);
+ if (version == 3) {
+ /* We need to convert this v3 configuration */
+ char *converted = migrate_config(new, stbuf.st_size);
+ if (converted != NULL) {
+ ELOG("\n");
+ ELOG("****************************************************************\n");
+ ELOG("NOTE: Automatically converted configuration file from v3 to v4.\n");
+ ELOG("\n");
+ ELOG("Please convert your config file to v4. You can use this command:\n");
+ ELOG(" mv %s %s.O\n", f, f);
+ ELOG(" i3-migrate-config-to-v4 %s.O > %s\n", f, f);
+ ELOG("****************************************************************\n");
+ ELOG("\n");
+ free(new);
+ new = converted;
+ } else {
+ LOG("\n");
+ LOG("**********************************************************************\n");
+ LOG("ERROR: Could not convert config file. Maybe i3-migrate-config-to-v4\n");
+ LOG("was not correctly installed on your system?\n");
+ LOG("**********************************************************************\n");
+ LOG("\n");
+ }
+ }
+
+ context = scalloc(sizeof(struct context));
+ context->filename = f;
+
+ struct ConfigResultIR *config_output = parse_config(new, context);
+ yajl_gen_free(config_output->json_gen);
+
+ check_for_duplicate_bindings(context);
+
+ if (context->has_errors || context->has_warnings) {
+ ELOG("FYI: You are using i3 version " I3_VERSION "\n");
+ if (version == 3)
+ ELOG("Please convert your configfile first, then fix any remaining errors (see above).\n");
+
+ char *editaction,
+ *pageraction;
+ sasprintf(&editaction, "i3-sensible-editor \"%s\" && i3-msg reload\n", f);
+ sasprintf(&pageraction, "i3-sensible-pager \"%s\"\n", errorfilename);
+ char *argv[] = {
+ NULL, /* will be replaced by the executable path */
+ "-f",
+ (config.font.pattern ? config.font.pattern : "fixed"),
+ "-t",
+ (context->has_errors ? "error" : "warning"),
+ "-m",
+ (context->has_errors ? "You have an error in your i3 config file!" : "Your config is outdated. Please fix the warnings to make sure everything works."),
+ "-b",
+ "edit config",
+ editaction,
+ (errorfilename ? "-b" : NULL),
+ (context->has_errors ? "show errors" : "show warnings"),
+ pageraction,
+ NULL};
+
+ start_nagbar(&config_error_nagbar_pid, argv);
+ free(editaction);
+ free(pageraction);
+ }
+
+ FREE(context->line_copy);
+ free(context);
+ free(new);
+ free(buf);
+
+ while (!SLIST_EMPTY(&variables)) {
+ current = SLIST_FIRST(&variables);
+ FREE(current->key);
+ FREE(current->value);
+ SLIST_REMOVE_HEAD(&variables, variables);
+ FREE(current);
+ }
+}
+
#endif
projects / i3 / i3 / blobdiff