#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
use List::Util qw(first);
my $tmp = fresh_workspace;
sub fullscreen_windows {
- scalar grep { $_->{fullscreen_mode} != 0 } @{get_ws_content($tmp)}
+ my $ws = $tmp;
+ $ws = shift if @_;
+
+ scalar grep { $_->{fullscreen_mode} != 0 } @{get_ws_content($ws)}
}
# get the output of this workspace
my $output;
for my $o (@outputs) {
# get the first CT_CON of each output
- my $content = first { $_->{type} == 2 } @{$o->{nodes}};
+ my $content = first { $_->{type} eq 'con' } @{$o->{nodes}};
if (defined(first { $_->{name} eq $tmp } @{$content->{nodes}})) {
$output = $o;
last;
ok(abs($wrect->{width} - $orect->{width}) < $threshold, 'width coordinate fullscreen');
ok(abs($wrect->{height} - $orect->{height}) < $threshold, 'height coordinate fullscreen');
-###############################################################################
-# test if setting two windows in fullscreen mode at the same time does not work
-###############################################################################
+################################################################################
+# Verify that when one window wants to go into fullscreen mode, the old
+# fullscreen window will be replaced.
+################################################################################
$original_rect = X11::XCB::Rect->new(x => 0, y => 0, width => 30, height => 30);
my $swindow = open_window(
$window->fullscreen(0);
sync_with_i3;
-is(fullscreen_windows(), 0, 'amount of fullscreen windows');
+is(fullscreen_windows(), 1, 'amount of fullscreen windows');
ok($swindow->mapped, 'window mapped after other fullscreen ended');
# clean up the workspace so that it will be cleaned when switching away
cmd 'kill' for (@{get_ws_content($tmp)});
+################################################################################
+# Verify that changing focus while in fullscreen does not work.
+################################################################################
+
+$tmp = fresh_workspace;
+
+my $other = open_window;
+is($x->input_focus, $other->id, 'other window focused');
+
+$window = open_window;
+is($x->input_focus, $window->id, 'window focused');
+
+cmd 'fullscreen';
+is($x->input_focus, $window->id, 'fullscreen window focused');
+
+cmd 'focus left';
+is($x->input_focus, $window->id, 'fullscreen window still focused');
+
+################################################################################
+# Verify that changing workspace while in global fullscreen does not work.
+################################################################################
+
+$tmp = fresh_workspace;
+$window = open_window;
+
+cmd 'fullscreen global';
+is($x->input_focus, $window->id, 'window focused');
+is(focused_ws(), $tmp, 'workspace selected');
+
+$other = get_unused_workspace;
+cmd "workspace $other";
+is($x->input_focus, $window->id, 'window still focused');
+is(focused_ws(), $tmp, 'workspace still selected');
+
+# leave global fullscreen so that is does not interfere with the other tests
+$window->fullscreen(0);
+sync_with_i3;
+
+################################################################################
+# Verify that fullscreening a window on a second workspace and moving it onto
+# the first workspace unfullscreens the first window.
+################################################################################
+
+my $tmp2 = fresh_workspace;
+$swindow = open_window;
+
+cmd 'fullscreen';
+
+is(fullscreen_windows($tmp2), 1, 'one fullscreen window on second ws');
+
+cmd "move workspace $tmp";
+
+is(fullscreen_windows($tmp2), 0, 'no fullscreen windows on second ws');
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on first ws');
+
+$swindow->fullscreen(0);
+sync_with_i3;
+
+# Verify that $swindow was the one that initially remained fullscreen.
+is(fullscreen_windows($tmp), 0, 'no fullscreen windows on first ws');
+
+################################################################################
+# Verify that opening a window with _NET_WM_STATE_FULLSCREEN unfullscreens any
+# existing container on the workspace and fullscreens the newly opened window.
+################################################################################
+
+$tmp = fresh_workspace;
+
+$window = open_window();
+
+cmd "fullscreen";
+
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on ws');
+is($x->input_focus, $window->id, 'fullscreen window focused');
+
+$swindow = open_window({
+ fullscreen => 1
+});
+
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on ws');
+is($x->input_focus, $swindow->id, 'fullscreen window focused');
+
+################################################################################
+# Verify that command ‘fullscreen enable’ works and is idempotent.
+################################################################################
+
+$tmp = fresh_workspace;
+
+$window = open_window;
+is($x->input_focus, $window->id, 'window focused');
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+cmd 'fullscreen enable';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on workspace');
+
+cmd 'fullscreen enable';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 1, 'still one fullscreen window on workspace');
+
+$window->fullscreen(0);
+sync_with_i3;
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+################################################################################
+# Verify that command ‘fullscreen enable global’ works and is idempotent.
+################################################################################
+
+$tmp = fresh_workspace;
+
+$window = open_window;
+is($x->input_focus, $window->id, 'window focused');
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+cmd 'fullscreen enable global';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on workspace');
+
+cmd 'fullscreen enable global';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 1, 'still one fullscreen window on workspace');
+
+$window->fullscreen(0);
+sync_with_i3;
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+################################################################################
+# Verify that command ‘fullscreen disable’ works and is idempotent.
+################################################################################
+
+$tmp = fresh_workspace;
+
+$window = open_window;
+is($x->input_focus, $window->id, 'window focused');
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+$window->fullscreen(1);
+sync_with_i3;
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on workspace');
+
+cmd 'fullscreen disable';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+cmd 'fullscreen disable';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 0, 'still no fullscreen window on workspace');
+
+################################################################################
+# Verify that command ‘fullscreen toggle’ works.
+################################################################################
+
+$tmp = fresh_workspace;
+
+$window = open_window;
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+cmd 'fullscreen toggle';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on workspace');
+
+cmd 'fullscreen toggle';
+is($x->input_focus, $window->id, 'window still focused');
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+################################################################################
+# Verify that a window’s fullscreen is disabled when another one is enabled
+# on the same workspace. The new fullscreen window should be focused.
+################################################################################
+
+$tmp = fresh_workspace;
+
+$window = open_window;
+$other = open_window;
+
+is($x->input_focus, $other->id, 'other window focused');
+is(fullscreen_windows($tmp), 0, 'no fullscreen window on workspace');
+
+cmd 'fullscreen enable';
+is($x->input_focus, $other->id, 'other window focused');
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on workspace');
+
+cmd '[id="' . $window->id . '"] fullscreen enable';
+is($x->input_focus, $window->id, 'window focused');
+is(fullscreen_windows($tmp), 1, 'one fullscreen window on workspace');
+
+################################################################################
+# Verify that when a global fullscreen is enabled the window is focused and
+# its workspace is selected, so that disabling the fullscreen keeps the window
+# focused and visible.
+################################################################################
+
+$tmp = fresh_workspace;
+
+$window = open_window;
+
+is($x->input_focus, $window->id, 'window focused');
+
+cmd 'workspace ' . get_unused_workspace;
+isnt($x->input_focus, $window->id, 'window not focused');
+isnt(focused_ws(), $tmp, 'workspace not selected');
+
+cmd '[id="' . $window->id . '"] fullscreen enable global';
+is($x->input_focus, $window->id, 'window focused');
+
+cmd 'fullscreen disable';
+is($x->input_focus, $window->id, 'window still focused');
+is(focused_ws(), $tmp, 'workspace selected');
+
done_testing;