--- /dev/null
+# i3 config file (v4)
+#
+# Please see http://i3wm.org/docs/userguide.html for a complete reference!
+#
+# This config file uses keycodes (bindsym) and was written for the QWERTY
+# layout.
+#
+# To get a config file with the same key positions, but for your current
+# layout, use the i3-config-wizard
+#
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:monospace 8
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn’t scale on retina/hidpi displays.
+
+# use these keys for focus, movement, and resize directions when reaching for
+# the arrows is not convenient
+set $up l
+set $down k
+set $left j
+set $right semicolon
+
+# use Mouse+Mod1 to drag floating windows to their wanted position
+floating_modifier Mod1
+
+# start a terminal
+bindsym Mod1+Return exec i3-sensible-terminal
+
+# kill focused window
+bindsym Mod1+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym Mod1+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym Mod1+$left focus left
+bindsym Mod1+$down focus down
+bindsym Mod1+$up focus up
+bindsym Mod1+$right focus right
+
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Left focus left
+bindsym Mod1+Down focus down
+bindsym Mod1+Up focus up
+bindsym Mod1+Right focus right
+
+# move focused window
+bindsym Mod1+Shift+$left move left
+bindsym Mod1+Shift+$down move down
+bindsym Mod1+Shift+$up move up
+bindsym Mod1+Shift+$right move right
+
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Shift+Left move left
+bindsym Mod1+Shift+Down move down
+bindsym Mod1+Shift+Up move up
+bindsym Mod1+Shift+Right move right
+
+# split in horizontal orientation
+bindsym Mod1+h split h
+
+# split in vertical orientation
+bindsym Mod1+v split v
+
+# enter fullscreen mode for the focused container
+bindsym Mod1+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym Mod1+s layout stacking
+bindsym Mod1+w layout tabbed
+bindsym Mod1+e layout toggle split
+
+# toggle tiling / floating
+bindsym Mod1+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym Mod1+space focus mode_toggle
+
+# focus the parent container
+bindsym Mod1+a focus parent
+
+# focus the child container
+#bindsym Mod1+d focus child
+
+# move the currently focused window to the scratchpad
+bindsym Mod1+Shift+minus move scratchpad
+
+# Show the next scratchpad window or hide the focused scratchpad window.
+# If there are multiple scratchpad windows, this command cycles through them.
+bindsym Mod1+minus scratchpad show
+
+# switch to workspace
+bindsym Mod1+1 workspace 1
+bindsym Mod1+2 workspace 2
+bindsym Mod1+3 workspace 3
+bindsym Mod1+4 workspace 4
+bindsym Mod1+5 workspace 5
+bindsym Mod1+6 workspace 6
+bindsym Mod1+7 workspace 7
+bindsym Mod1+8 workspace 8
+bindsym Mod1+9 workspace 9
+bindsym Mod1+0 workspace 10
+
+# move focused container to workspace
+bindsym Mod1+Shift+1 move container to workspace 1
+bindsym Mod1+Shift+2 move container to workspace 2
+bindsym Mod1+Shift+3 move container to workspace 3
+bindsym Mod1+Shift+4 move container to workspace 4
+bindsym Mod1+Shift+5 move container to workspace 5
+bindsym Mod1+Shift+6 move container to workspace 6
+bindsym Mod1+Shift+7 move container to workspace 7
+bindsym Mod1+Shift+8 move container to workspace 8
+bindsym Mod1+Shift+9 move container to workspace 9
+bindsym Mod1+Shift+0 move container to workspace 10
+
+# reload the configuration file
+bindsym Mod1+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym Mod1+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+ # These bindings trigger as soon as you enter the resize mode
+
+ # Pressing left will shrink the window’s width.
+ # Pressing right will grow the window’s width.
+ # Pressing up will shrink the window’s height.
+ # Pressing down will grow the window’s height.
+ bindsym $left resize shrink width 10 px or 10 ppt
+ bindsym $down resize grow height 10 px or 10 ppt
+ bindsym $up resize shrink height 10 px or 10 ppt
+ bindsym $right resize grow width 10 px or 10 ppt
+
+ # same bindings, but for the arrow keys
+ bindsym Left resize shrink width 10 px or 10 ppt
+ bindsym Down resize grow height 10 px or 10 ppt
+ bindsym Up resize shrink height 10 px or 10 ppt
+ bindsym Right resize grow width 10 px or 10 ppt
+
+ # back to normal: Enter or Escape
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+
+bindsym Mod1+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+ status_command i3status
+}
+
+#######################################################################
+# automatically start i3-config-wizard to offer the user to create a
+# keysym-based config which used their favorite modifier (alt or windows)
+#
+# i3-config-wizard will not launch if there already is a config file
+# in ~/.i3/config.
+#
+# Please remove the following exec line:
+#######################################################################
+exec i3-config-wizard
--- /dev/null
+# WARNING
+# WARNING: This configuration file is a template for the i3-config-wizard to
+# WARNING: generate a config which uses keysyms in your current layout. It does
+# WARNING: not get loaded by i3. Please do not change it.
+# WARNING
+
+# i3 config file (v4)
+#
+# Please see http://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod1
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:monospace 8
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn’t scale on retina/hidpi displays.
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindcode $mod+36 exec i3-sensible-terminal
+
+# kill focused window
+bindcode $mod+Shift+24 kill
+
+# start dmenu (a program launcher)
+bindcode $mod+40 exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindcode $mod+44 focus left
+bindcode $mod+45 focus down
+bindcode $mod+46 focus up
+bindcode $mod+47 focus right
+
+# alternatively, you can use the cursor keys:
+bindcode $mod+113 focus left
+bindcode $mod+116 focus down
+bindcode $mod+111 focus up
+bindcode $mod+114 focus right
+
+# move focused window
+bindcode $mod+Shift+44 move left
+bindcode $mod+Shift+45 move down
+bindcode $mod+Shift+46 move up
+bindcode $mod+Shift+47 move right
+
+# alternatively, you can use the cursor keys:
+bindcode $mod+Shift+113 move left
+bindcode $mod+Shift+116 move down
+bindcode $mod+Shift+111 move up
+bindcode $mod+Shift+114 move right
+
+# split in horizontal orientation
+bindcode $mod+43 split h
+
+# split in vertical orientation
+bindcode $mod+55 split v
+
+# enter fullscreen mode for the focused container
+bindcode $mod+41 fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindcode $mod+39 layout stacking
+bindcode $mod+25 layout tabbed
+bindcode $mod+26 layout toggle split
+
+# toggle tiling / floating
+bindcode $mod+Shift+65 floating toggle
+
+# change focus between tiling / floating windows
+bindcode $mod+65 focus mode_toggle
+
+# focus the parent container
+bindcode $mod+38 focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# switch to workspace
+bindcode $mod+10 workspace 1
+bindcode $mod+11 workspace 2
+bindcode $mod+12 workspace 3
+bindcode $mod+13 workspace 4
+bindcode $mod+14 workspace 5
+bindcode $mod+15 workspace 6
+bindcode $mod+16 workspace 7
+bindcode $mod+17 workspace 8
+bindcode $mod+18 workspace 9
+bindcode $mod+19 workspace 10
+
+# move focused container to workspace
+bindcode $mod+Shift+10 move container to workspace 1
+bindcode $mod+Shift+11 move container to workspace 2
+bindcode $mod+Shift+12 move container to workspace 3
+bindcode $mod+Shift+13 move container to workspace 4
+bindcode $mod+Shift+14 move container to workspace 5
+bindcode $mod+Shift+15 move container to workspace 6
+bindcode $mod+Shift+16 move container to workspace 7
+bindcode $mod+Shift+17 move container to workspace 8
+bindcode $mod+Shift+18 move container to workspace 9
+bindcode $mod+Shift+19 move container to workspace 10
+
+# reload the configuration file
+bindcode $mod+Shift+54 reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindcode $mod+Shift+27 restart
+# exit i3 (logs you out of your X session)
+bindcode $mod+Shift+26 exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+ # These bindings trigger as soon as you enter the resize mode
+
+ # Pressing left will shrink the window’s width.
+ # Pressing right will grow the window’s width.
+ # Pressing up will shrink the window’s height.
+ # Pressing down will grow the window’s height.
+ bindcode 44 resize shrink width 10 px or 10 ppt
+ bindcode 45 resize grow height 10 px or 10 ppt
+ bindcode 46 resize shrink height 10 px or 10 ppt
+ bindcode 47 resize grow width 10 px or 10 ppt
+
+ # same bindings, but for the arrow keys
+ bindcode 113 resize shrink width 10 px or 10 ppt
+ bindcode 116 resize grow height 10 px or 10 ppt
+ bindcode 111 resize shrink height 10 px or 10 ppt
+ bindcode 114 resize grow width 10 px or 10 ppt
+
+ # back to normal: Enter or Escape
+ bindcode 36 mode "default"
+ bindcode 9 mode "default"
+}
+
+bindcode $mod+27 mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+ status_command i3status
+}
+++ /dev/null
-[Desktop Entry]
-Name=i3 (with debug log)
-Comment=improved dynamic tiling window manager
-Exec=i3-with-shmlog
-Type=Application
-Keywords=tiling;wm;windowmanager;window;manager;
+++ /dev/null
-[Desktop Entry]
-Type=Application
-Name=i3
-NoDisplay=true
-GenericName=A dynamic tiling window manager
-Comment=improved dynamic tiling window manager
-Exec=i3
-X-GNOME-WMName=i3
-X-GNOME-Autostart-Phase=WindowManager
-X-GNOME-Provides=windowmanager
-X-GNOME-Autostart-Notify=false
+++ /dev/null
-# i3 config file (v4)
-#
-# Please see http://i3wm.org/docs/userguide.html for a complete reference!
-#
-# This config file uses keycodes (bindsym) and was written for the QWERTY
-# layout.
-#
-# To get a config file with the same key positions, but for your current
-# layout, use the i3-config-wizard
-#
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 8
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# Before i3 v4.8, we used to recommend this one as the default:
-# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-# The font above is very space-efficient, that is, it looks good, sharp and
-# clear in small sizes. However, its unicode glyph coverage is limited, the old
-# X core fonts rendering does not support right-to-left and this being a bitmap
-# font, it doesn’t scale on retina/hidpi displays.
-
-# use these keys for focus, movement, and resize directions when reaching for
-# the arrows is not convenient
-set $up l
-set $down k
-set $left j
-set $right semicolon
-
-# use Mouse+Mod1 to drag floating windows to their wanted position
-floating_modifier Mod1
-
-# start a terminal
-bindsym Mod1+Return exec i3-sensible-terminal
-
-# kill focused window
-bindsym Mod1+Shift+q kill
-
-# start dmenu (a program launcher)
-bindsym Mod1+d exec dmenu_run
-# There also is the (new) i3-dmenu-desktop which only displays applications
-# shipping a .desktop file. It is a wrapper around dmenu, so you need that
-# installed.
-# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindsym Mod1+$left focus left
-bindsym Mod1+$down focus down
-bindsym Mod1+$up focus up
-bindsym Mod1+$right focus right
-
-# alternatively, you can use the cursor keys:
-bindsym Mod1+Left focus left
-bindsym Mod1+Down focus down
-bindsym Mod1+Up focus up
-bindsym Mod1+Right focus right
-
-# move focused window
-bindsym Mod1+Shift+$left move left
-bindsym Mod1+Shift+$down move down
-bindsym Mod1+Shift+$up move up
-bindsym Mod1+Shift+$right move right
-
-# alternatively, you can use the cursor keys:
-bindsym Mod1+Shift+Left move left
-bindsym Mod1+Shift+Down move down
-bindsym Mod1+Shift+Up move up
-bindsym Mod1+Shift+Right move right
-
-# split in horizontal orientation
-bindsym Mod1+h split h
-
-# split in vertical orientation
-bindsym Mod1+v split v
-
-# enter fullscreen mode for the focused container
-bindsym Mod1+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym Mod1+s layout stacking
-bindsym Mod1+w layout tabbed
-bindsym Mod1+e layout toggle split
-
-# toggle tiling / floating
-bindsym Mod1+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym Mod1+space focus mode_toggle
-
-# focus the parent container
-bindsym Mod1+a focus parent
-
-# focus the child container
-#bindsym Mod1+d focus child
-
-# move the currently focused window to the scratchpad
-bindsym Mod1+Shift+minus move scratchpad
-
-# Show the next scratchpad window or hide the focused scratchpad window.
-# If there are multiple scratchpad windows, this command cycles through them.
-bindsym Mod1+minus scratchpad show
-
-# switch to workspace
-bindsym Mod1+1 workspace 1
-bindsym Mod1+2 workspace 2
-bindsym Mod1+3 workspace 3
-bindsym Mod1+4 workspace 4
-bindsym Mod1+5 workspace 5
-bindsym Mod1+6 workspace 6
-bindsym Mod1+7 workspace 7
-bindsym Mod1+8 workspace 8
-bindsym Mod1+9 workspace 9
-bindsym Mod1+0 workspace 10
-
-# move focused container to workspace
-bindsym Mod1+Shift+1 move container to workspace 1
-bindsym Mod1+Shift+2 move container to workspace 2
-bindsym Mod1+Shift+3 move container to workspace 3
-bindsym Mod1+Shift+4 move container to workspace 4
-bindsym Mod1+Shift+5 move container to workspace 5
-bindsym Mod1+Shift+6 move container to workspace 6
-bindsym Mod1+Shift+7 move container to workspace 7
-bindsym Mod1+Shift+8 move container to workspace 8
-bindsym Mod1+Shift+9 move container to workspace 9
-bindsym Mod1+Shift+0 move container to workspace 10
-
-# reload the configuration file
-bindsym Mod1+Shift+c reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym Mod1+Shift+r restart
-# exit i3 (logs you out of your X session)
-bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
- # These bindings trigger as soon as you enter the resize mode
-
- # Pressing left will shrink the window’s width.
- # Pressing right will grow the window’s width.
- # Pressing up will shrink the window’s height.
- # Pressing down will grow the window’s height.
- bindsym $left resize shrink width 10 px or 10 ppt
- bindsym $down resize grow height 10 px or 10 ppt
- bindsym $up resize shrink height 10 px or 10 ppt
- bindsym $right resize grow width 10 px or 10 ppt
-
- # same bindings, but for the arrow keys
- bindsym Left resize shrink width 10 px or 10 ppt
- bindsym Down resize grow height 10 px or 10 ppt
- bindsym Up resize shrink height 10 px or 10 ppt
- bindsym Right resize grow width 10 px or 10 ppt
-
- # back to normal: Enter or Escape
- bindsym Return mode "default"
- bindsym Escape mode "default"
-}
-
-bindsym Mod1+r mode "resize"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-bar {
- status_command i3status
-}
-
-#######################################################################
-# automatically start i3-config-wizard to offer the user to create a
-# keysym-based config which used their favorite modifier (alt or windows)
-#
-# i3-config-wizard will not launch if there already is a config file
-# in ~/.i3/config.
-#
-# Please remove the following exec line:
-#######################################################################
-exec i3-config-wizard
+++ /dev/null
-# WARNING
-# WARNING: This configuration file is a template for the i3-config-wizard to
-# WARNING: generate a config which uses keysyms in your current layout. It does
-# WARNING: not get loaded by i3. Please do not change it.
-# WARNING
-
-# i3 config file (v4)
-#
-# Please see http://i3wm.org/docs/userguide.html for a complete reference!
-
-set $mod Mod1
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 8
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# Before i3 v4.8, we used to recommend this one as the default:
-# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-# The font above is very space-efficient, that is, it looks good, sharp and
-# clear in small sizes. However, its unicode glyph coverage is limited, the old
-# X core fonts rendering does not support right-to-left and this being a bitmap
-# font, it doesn’t scale on retina/hidpi displays.
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# start a terminal
-bindcode $mod+36 exec i3-sensible-terminal
-
-# kill focused window
-bindcode $mod+Shift+24 kill
-
-# start dmenu (a program launcher)
-bindcode $mod+40 exec dmenu_run
-# There also is the (new) i3-dmenu-desktop which only displays applications
-# shipping a .desktop file. It is a wrapper around dmenu, so you need that
-# installed.
-# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindcode $mod+44 focus left
-bindcode $mod+45 focus down
-bindcode $mod+46 focus up
-bindcode $mod+47 focus right
-
-# alternatively, you can use the cursor keys:
-bindcode $mod+113 focus left
-bindcode $mod+116 focus down
-bindcode $mod+111 focus up
-bindcode $mod+114 focus right
-
-# move focused window
-bindcode $mod+Shift+44 move left
-bindcode $mod+Shift+45 move down
-bindcode $mod+Shift+46 move up
-bindcode $mod+Shift+47 move right
-
-# alternatively, you can use the cursor keys:
-bindcode $mod+Shift+113 move left
-bindcode $mod+Shift+116 move down
-bindcode $mod+Shift+111 move up
-bindcode $mod+Shift+114 move right
-
-# split in horizontal orientation
-bindcode $mod+43 split h
-
-# split in vertical orientation
-bindcode $mod+55 split v
-
-# enter fullscreen mode for the focused container
-bindcode $mod+41 fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindcode $mod+39 layout stacking
-bindcode $mod+25 layout tabbed
-bindcode $mod+26 layout toggle split
-
-# toggle tiling / floating
-bindcode $mod+Shift+65 floating toggle
-
-# change focus between tiling / floating windows
-bindcode $mod+65 focus mode_toggle
-
-# focus the parent container
-bindcode $mod+38 focus parent
-
-# focus the child container
-#bindsym $mod+d focus child
-
-# switch to workspace
-bindcode $mod+10 workspace 1
-bindcode $mod+11 workspace 2
-bindcode $mod+12 workspace 3
-bindcode $mod+13 workspace 4
-bindcode $mod+14 workspace 5
-bindcode $mod+15 workspace 6
-bindcode $mod+16 workspace 7
-bindcode $mod+17 workspace 8
-bindcode $mod+18 workspace 9
-bindcode $mod+19 workspace 10
-
-# move focused container to workspace
-bindcode $mod+Shift+10 move container to workspace 1
-bindcode $mod+Shift+11 move container to workspace 2
-bindcode $mod+Shift+12 move container to workspace 3
-bindcode $mod+Shift+13 move container to workspace 4
-bindcode $mod+Shift+14 move container to workspace 5
-bindcode $mod+Shift+15 move container to workspace 6
-bindcode $mod+Shift+16 move container to workspace 7
-bindcode $mod+Shift+17 move container to workspace 8
-bindcode $mod+Shift+18 move container to workspace 9
-bindcode $mod+Shift+19 move container to workspace 10
-
-# reload the configuration file
-bindcode $mod+Shift+54 reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindcode $mod+Shift+27 restart
-# exit i3 (logs you out of your X session)
-bindcode $mod+Shift+26 exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
- # These bindings trigger as soon as you enter the resize mode
-
- # Pressing left will shrink the window’s width.
- # Pressing right will grow the window’s width.
- # Pressing up will shrink the window’s height.
- # Pressing down will grow the window’s height.
- bindcode 44 resize shrink width 10 px or 10 ppt
- bindcode 45 resize grow height 10 px or 10 ppt
- bindcode 46 resize shrink height 10 px or 10 ppt
- bindcode 47 resize grow width 10 px or 10 ppt
-
- # same bindings, but for the arrow keys
- bindcode 113 resize shrink width 10 px or 10 ppt
- bindcode 116 resize grow height 10 px or 10 ppt
- bindcode 111 resize shrink height 10 px or 10 ppt
- bindcode 114 resize grow width 10 px or 10 ppt
-
- # back to normal: Enter or Escape
- bindcode 36 mode "default"
- bindcode 9 mode "default"
-}
-
-bindcode $mod+27 mode "resize"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-bar {
- status_command i3status
-}
+++ /dev/null
-[Desktop Entry]
-Name=i3
-Comment=improved dynamic tiling window manager
-Exec=i3
-TryExec=i3
-Type=Application
-X-LightDM-DesktopName=i3
-DesktopNames=i3
-Keywords=tiling;wm;windowmanager;window;manager;
--- /dev/null
+[Desktop Entry]
+Type=Application
+Name=i3
+NoDisplay=true
+GenericName=A dynamic tiling window manager
+Comment=improved dynamic tiling window manager
+Exec=i3
+X-GNOME-WMName=i3
+X-GNOME-Autostart-Phase=WindowManager
+X-GNOME-Provides=windowmanager
+X-GNOME-Autostart-Notify=false
--- /dev/null
+[Desktop Entry]
+Name=i3 (with debug log)
+Comment=improved dynamic tiling window manager
+Exec=i3-with-shmlog
+Type=Application
+Keywords=tiling;wm;windowmanager;window;manager;
--- /dev/null
+[Desktop Entry]
+Name=i3
+Comment=improved dynamic tiling window manager
+Exec=i3
+TryExec=i3
+Type=Application
+X-LightDM-DesktopName=i3
+DesktopNames=i3
+Keywords=tiling;wm;windowmanager;window;manager;
projects / i3 / i3 / commitdiff