+2018-05-11 i3status 2.12
+
+ • fix NULL value on OpenBSD when there is no acpitz0
+ • show IP address when address has a label
+ • man: explicitly use format_up/format_down in ethernet, wireless conf
+ • man: remove SLOC comment
+ • treat zero battery capacity as "not available"
+ • add IPv6 address when IPv4 isn't available
+ • call tzset at each time print to pick up time zone changes
+ • doc: fixed minor typos
+ • be more cautious about handling invalid battery measurements.
+ • Makefile: make PKG_CONFIG overridable
+ • fix CPU unit tests
+ • use local timezone for battery %emptytime
+ • fix memory leak/use BEGINS_WITH macro
+ • _first_: add check for virtual ethernet devices
+ • add battery capacity parsing
+ • multiple CPU support for cpu_usage
+ • remove useless checks (we use char, not unsigned char) to fix compilation warnings
+ • disk: sanitize trailing slashes
+ • plug an fd leak in the OpenBSD-specific code for
+ • suppress printing :00 seconds of remaining battery lifetime, as apm(4)'s
+ estimate only has a granularity of minutes.
+ • fix the deciKelvin to Celsius conversion on FreeBSD
+ • make first_eth_interface() work on OpenBSD
+ • include sys/select.h on OpenBSD
+
+2017-01-21 i3status 2.11
+
+ • re-add forgotten wakeup call from SIGUSR1 handler
+ • disk_info: bugfix: check format_not_mounted is not NULL before using it
+ • revert back to using nanosleep
+ • man: give more descriptive symbols to battery format
+ • battery: removes the 'remaining' time when the battery is full
+ • add separator and separator_block_width as universal module options
+ • man: fix link to contrib
+ • cpu_temperature: add glob check
+ • battery: add status_unk
+ • reconnect to PluseAudio when connection is lost
+ • wireless: add ifdef to compile on macOS
+ • order default configuration paths the same as in i3
+ • add version files for release tarball
+ • man: make tztime example config match the context
+ • cpu_usage: add color thresholds
+ • battery: support multiple batteries
+ • disk: use empty string for not mounted disks
+ • default config: remove DHCP, VPN
+ • wireless: fix FTBFS on hurd and kFreeBSD
+ • parse uevent file to detect network device type
+ • allow pulse device to be specified by name
+ • battery: find batteries using glob
+ • tztime: support locales
+ • wireless: use blank padding for quality
+ • add unit tests
+ • fix compilation with -fno-common
+
+2016-01-01 i3status 2.10
+
+ • man: fix typo in battery example
+ • Pass the "instance" JSON property key for tztime blocks
+ • Fix build (and build warnings) on FreeBSD
+ • Fix build on OpenBSD
+ • path_exists, run_watch: add format_down
+ • volume: add PulseAudio support. This significantly reduces battery
+ consumption on systems that use PulseAudio, which is the default on any
+ modern Linux desktop.
+ • wireless/OpenBSD: use the maximum rssi, not the scaled percentage for the
+ signal level.
+ • make: Add support for differing PREFIX and MANPREFIX.
+ • battery: make output HH:MM across all platforms.
+ • battery: clamp the percentage at 100% when last_full_capacity is enabled.
+ • Use format_not_mounted if the directory for a disk_info block does not
+ exist.
+ • disk_info/OS X: Fix build.
+ • volume/OpenBSD: use SndIO.
+ • eth, wireless: Use "color_degraded" when interface has no IP.
+ • eth, wireless/FreeBSD: Fix for recent FreeBSD versions.
+ • wireless/Linux: switch from libiw to libnl. This allows you to run i3status
+ on kernels which don’t have the wext compatibility module enabled.
+ • battery/FreeBSD: properly detect charging status
+ • eth: first_eth_interface: ignore MAC addresses, look for IPv4/IPv6 addresses
+ • Implement support for Pango markup.
+ • format detection: recognise swaybar
+
+2015-03-22 i3status 2.9
+
+ • meta: i3status is now on GitHub and uses clang-format
+ • allow customization of the module separator
+ • add “align” and “min_width” options for each module
+ • fix CFLAGS and LDFLAGS for DragonFly and FreeBSD
+ • add contrib/net-speed, a more light-weight reimplementation of
+ contrib/measure-net-speed.bash
+ • battery: add hide_seconds option
+ • battery: fix for systems without POWER_SUPPLY_VOLTAGE_NOW
+ • battery: for %percentage, drop leading 0 for values < 10
+ • battery: add NetBSD support
+ • battery: use absolute values for (dis)charging rates
+ • battery: introduce status_{chr,bat,full}
+ • cpu_temperature: fix displaying multiple sensors
+ • cpu_temperature: fix NetBSD support
+ • cpu_temperature: fix DragonFly support
+ • disk: introduce threshold_type and low_threshold
+ • disk: add format_not_mounted for unmounted paths
+ • ethernet, wireless: support special interface name _first_
+ • run_watch: check all matching pid files until first valid one
+ • volume: fix wrong color tags with xmobar
+ • wireless: support %frequency (2.4 vs. 5 GHz)
+
+2014-01-05 i3status 2.8
+
+ • Fix build on GNU/Hurd
+ • Add format_down for battery if no battery is available
+ • Use degraded color in case volume is muted with OSS
+ • Support mixer_idx with OSS
+ • Enable colored output for battery on FreeBSD
+ • print_volume: don’t return, complete the buffer first
+ • Support colored output for CPU temperature on FreeBSD
+ • manpage: mention i3bar in the description
+ • manpage: be more explicit about the path option
+ • battery: use path as i3bar JSON “instance”
+ • print_volume(linux): Open a new mixer every time
+ • Implement term output format
+ • signal handler: set flag because directly calling fprintf() is unsafe
+ • Makefile: use .SILENT and support V=1 for verbose builds
+ • load: allow max_threshold to be a float
+ • manpage: Add example path for CPU temperature
+ • Fix build on NetBSD
+ • Implement cpu usage, ethernet status, cpu temperature on NetBSD
+ • fix slurp(), it needs to read size-1 for the trailing NUL
+ • format detection: simplify code, handle "sh" processes in the hierarchy
+ • default config: show %avail disk space instead of %free
+ • Added different format string for volume in case it is muted
+ • manpage: document format_muted
+ • add support for path_exists directive
+ • disk: Distinguish between IEC, SI and custom prefixes
+
+2013-02-27 i3status 2.7
+
+ • Various battery fixes for OpenBSD
+ • Implement %speed for ethernet on OpenBSD
+ • Implement %essid and %signal for wireless on OpenBSD
+ • Skip a day in the Discordian calendar when St. Tib's Day has passed
+ • colors: Handle down wireless interfaces just like ethernet interfaces
+ • Use acpitz(4) instead of cpu(4) for temperature on OpenBSD
+ • temperature: introduce max_threshold
+ • temperature: allow for abitrary sensors to be selected with 'path' on OpenBSD
+ • battery: colorize output even without discharge rate
+ • ddate: Reduce the season day to 0-9 to properly print ordinal suffixes
+ • add good, degraded and bad colors per module
+ • config: introduce an utf-8 character so that editors are forced to use utf-8
+ • ddate: Teen ordinal numbers always use a 'th' suffix.
+ • DragonFlyBSD support added
+ • make SIGUSR1 do nothing, so that killall -USR1 i3status will force an update
+ • changing volume color from bad to degraded if muted
+ • make refreshs align with minutes
+ • wifi: properly display ad-hoc networks
+ • Bugfix: output auto detect: properly detect ambiguous situations
+ • Add tztime module to support multiple different timezones
+ • battery: add option to show capacity without decimals
+ • Add colorized output for load avg
+ • ipv6: properly handle colors for output_format == xmobar
+ • contrib: fix premature insetion of status message into JSON
+
+2012-10-03 i3status 2.6
+
+ • Error handling: Properly output JSON errors in the battery module
+ • Colorize battery output if remaining time/percentage below threshold
+ • Colorize volume in red if muted
+ • Include a Perl and Python example wrapper script for i3status’s JSON output
+ • Avoid division by zero when calculating CPU usage
+ • Add consumption to battery info
+ • Use correct units for battery calculations
+ • Add percentage values for disk info
+ • Save the DNS lookup for k.root-servers.net in the ipv6 module
+
+2012-05-11 i3status 2.5.1
+
+ • Handle %d with non-default CPU temperature path
+ • Improve error message when the cpu temperature cannot be read
+ • Remove cpu_temperature from the default config
+ • Error handling: Never output null as full_text (JSON), prefix messages with i3status
+
2012-05-02 i3status 2.5
• implement the i3bar JSON protocol
projects / i3 / i3status / blobdiff