i3status(1)
===========
Michael Stapelberg <michael@i3wm.org>
-v2.10, January 2016
+v2.11, January 2017
== NAME
== DESCRIPTION
-i3status is a small program (about 1500 SLOC) for generating a status bar for
-i3bar, dzen2, xmobar, lemonbar or similar programs. It is designed to be very
-efficient by issuing a very small number of system calls, as one generally
-wants to update such a status line every second. This ensures that even under
-high load, your status bar is updated correctly. Also, it saves a bit of energy
-by not hogging your CPU as much as spawning the corresponding amount of shell
-commands would.
+i3status is a small program for generating a status bar for i3bar, dzen2,
+xmobar, lemonbar or similar programs. It is designed to be very efficient by
+issuing a very small number of system calls, as one generally wants to update
+such a status line every second. This ensures that even under high load, your
+status bar is updated correctly. Also, it saves a bit of energy by not hogging
+your CPU as much as spawning the corresponding amount of shell commands would.
== CONFIGURATION
order += "ethernet eth0"
order += "battery 0"
order += "cpu_temperature 0"
+order += "memory"
order += "load"
order += "tztime local"
order += "tztime berlin"
path = "/sys/devices/platform/coretemp.0/temp1_input"
}
+memory {
+ format = "%used"
+ threshold_degraded = "10%"
+ format_degraded = "MEMORY: %free"
+}
+
disk "/" {
format = "%free"
}
The +interval+ directive specifies the time in seconds for which i3status will
sleep before printing the next status line.
-Using +output_format+ you can chose which format strings i3status should
+Using +output_format+ you can choose which format strings i3status should
use in its output. Currently available are:
i3bar::
If you don't fancy the vertical separators between modules i3status/i3bar
uses by default, you can employ the +separator+ directive to configure how
-modules are separated. You can either disable the default separator altogether
+modules are separated. You can also disable the default separator altogether by
setting it to the empty string. You might then define separation as part of a
module's format string. This is your only option when using the i3bar output
format as the separator is drawn by i3bar directly otherwise. For the other
output formats, the provided non-empty string will be automatically enclosed
with the necessary coloring bits if color support is enabled.
-i3bar supports Pango markup, allowing your format strings to specify font
+i3bar supports Pango markup, allowing your format strings to specify font,
color, size, etc. by setting the +markup+ directive to "pango". Note that the
ampersand ("&"), less-than ("<"), greater-than (">"), single-quote ("'"), and
double-quote (""") characters need to be replaced with "`&`", "`<`",
for generated content (e.g. wireless ESSID, time).
*Example configuration*:
+
-------------------------------------------------------------
general {
output_format = "xmobar"
"gbytes_avail", and prefix_type to "binary", and the remaining available disk
space is below 2 GiB, it will be colored bad. If not specified, threshold_type
is assumed to be "percentage_avail" and low_threshold to be set to 0, which
-implies no coloring at all.
+implies no coloring at all. You can customize the output format when below
+low_threshold with format_below_threshold.
You can define a different format with the option "format_not_mounted"
which is used if the path does not exist or is not a mount point. Defaults to "".
*Example low_threshold*: +5+
+*Example format_below_threshold*: +Warning: %percentage_avail+
+
*Example threshold_type*: +percentage_free+
=== Run-watch
=== Ethernet
Gets the IP address and (if possible) the link speed of the given ethernet
-interface. Getting the link speed requires the cap_net_admin capability. Set
-it using +setcap cap_net_admin=ep $(which i3status)+.
+interface. If no IPv4 address is available and an IPv6 address is, it will be
+displayed. Getting the link speed requires the cap_net_admin capability.
+Set it using +setcap cap_net_admin=ep $(which i3status)+.
The special interface name `_first_` will be replaced by the first non-wireless
network interface found on the system (excluding devices starting with "lo").
If your battery is represented in a non-standard path in /sys, be sure to
modify the "path" property accordingly, i.e. pointing to the uevent file on
-your system. The first occurence of %d gets replaced with the battery number,
+your system. The first occurrence of %d gets replaced with the battery number,
but you can just hard-code a path as well.
It is possible to define a low_threshold that causes the battery text to be
"percentage". So, if you configure low_threshold to 10 and threshold_type to
"time", and your battery lasts another 9 minutes, it will be colored red.
+To show an aggregate of all batteries in the system, use "all" as the number. In
+this case (for Linux), the /sys path must contain the "%d" sequence. Otherwise,
+the number indicates the battery index as reported in /sys.
+
Optionally custom strings including any UTF-8 symbols can be used for different
battery states. This makes it possible to display individual symbols
for each state (charging, discharging, unknown, full)
If any of these special status strings are omitted, the default (CHR, BAT, UNK,
FULL) is used.
-*Example order*: +battery 0+
+*Example order (for the first battery)*: +battery 0+
+
+*Example order (aggregate of all batteries)*: +battery all+
*Example format*: +%status %remaining (%emptytime %consumption)+
*Example threshold_type*: +time+
-*Example path*: +/sys/class/power_supply/CMB1/uevent+
+*Example path (%d replaced by title number)*: +/sys/class/power_supply/CMB%d/uevent+
+
+*Example path (ignoring the number)*: +/sys/class/power_supply/CMB1/uevent+
=== CPU-Temperature
Gets the temperature of the given thermal zone. It is possible to
define a max_threshold that will color the temperature red in case the
-specified thermal zone is getting too hot. Defaults to 75 degrees C.
+specified thermal zone is getting too hot. Defaults to 75 degrees C. The
+output format when above max_threshold can be customized with
+format_above_threshold.
*Example order*: +cpu_temperature 0+
*Example max_threshold*: +42+
+*Example format_above_threshold*: +Warning T above threshold: %degrees °C+
+
*Example path*: +/sys/devices/platform/coretemp.0/temp1_input+
=== CPU Usage
It is possible to define a max_threshold that will color the load
value red in case the CPU average over the last interval is getting
-higher than the configured threshold. Defaults to 95.
+higher than the configured threshold. Defaults to 95. The output
+format when above max_threshold can be customized with
+format_above_threshold.
It is possible to define a degraded_threshold that will color the load
value yellow in case the CPU average over the last interval is getting
-higher than the configured threshold. Defaults to 90.
+higher than the configured threshold. Defaults to 90. The output format
+when above degraded threshold can be customized with
+format_above_degraded_threshold.
+
+For displaying the Nth CPU usage, you can use the %cpu<N> format string,
+starting from %cpu0. This feature is currently not supported in FreeBSD.
*Example order*: +cpu_usage+
-*Example format*: +%usage+
+*Example format*: +all: %usage CPU_0: %cpu0 CPU_1: %cpu1+
*Example max_threshold*: +75+
+*Example format_above_threshold*: +Warning above threshold: %usage+
+
*Example degraded_threshold*: +25+
+*Example format_above_degraded_threshold*: +Warning above degraded threshold: %usage+
+
+=== Memory
+
+Gets the memory usage from system on a Linux system from +/proc/meminfo+. Other
+systems are currently not supported.
+
+As format placeholders, +total+, +used+, +free+, +available+ and +shared+ are
+available. These will print human readable values. It's also possible to prefix
+the placeholders with +percentage_+ to get a value in percent.
+
+It's possible to define a +threshold_degraded+ and a +threshold_critical+ to
+color the status bar output in yellow or red, if the available memory falls
+below the given threshold. Possible values of the threshold can be any integer,
+suffixed with an iec symbol (+T+, +G+, +M+, +K+). Alternatively, the integer
+can be suffixed by a percent sign, which then rets evaluated relatively to
+total memory.
+
+If the +format_degraded+ parameter is given and either the critical or the
+degraded threshold applies, +format_degraded+ will get used as format string.
+It acts equivalently to +format+.
+
+As Linux' meminfo doesn't expose the overall memory in use, there are multiple
+methods to distinguish the actually used memory.
+
+*Example memory_used_method*: +memavailable+ ("total memory" - "MemAvailable", matches +free+ command)
+
+*Example memory_used_method*: +classical+ ("total memory" - "free" - "buffers" - "cache", matches gnome system monitor)
+
+*Example order*: +memory+
+
+*Example format*: +%free %available (%used) / %total+
+
+*Example format*: +%percentage_used used, %percentage_free free, %percentage_shared shared+
+
+*Example threshold_degraded*: +10%+
+
+*Example threshold_critical*: +5%+
+
+*Example format_degraded*: +Memory LOW: %free+
+
=== Load
Gets the system load (number of processes waiting for CPU time in the last
1, 5 and 15 minutes). It is possible to define a max_threshold that will
color the load value red in case the load average of the last minute is
-getting higher than the configured threshold. Defaults to 5.
+getting higher than the configured threshold. Defaults to 5. The output
+format when above max_threshold can be customized with
+format_above_threshold.
*Example order*: +load+
*Example max_threshold*: +"0,1"+
+*Example format_above_threshold*: +Warning: %1min %5min %15min+
+
=== Time
Outputs the current time in the local timezone.
Files below that path make for valid timezone strings, e.g. for
+/usr/share/zoneinfo/Europe/Berlin+ you can set timezone to +Europe/Berlin+
in the +tztime+ module.
+To override the locale settings of your environment, set the +locale+ option.
*Example order*: +tztime berlin+
*Example timezone*: +Europe/Berlin+
+*Example locale*: +de_DE.UTF-8+
+
If you would like to use markup in this section, there is a separate
+format_time+ option that is automatically escaped. Its output then replaces
%time in the format string.
device = "pulse:N"
-where N is the index of the PulseAudio sink. If no sink is specified the
-default is used. If the device string is missing or is set to "default",
-PulseAudio will be tried if detected and will fallback to ALSA (Linux)
-or OSS (FreeBSD/OpenBSD).
+where N is the index or name of the PulseAudio sink. You can obtain the name of
+the sink with the following command:
+
+ $ pacmd list-sinks | grep name:
+ name: <alsa_output.pci-0000_00_14.2.analog-stereo>
+
+The name is what's inside the angle brackets, not including them. If no sink is
+specified the default sink is used. If the device string is missing or is set
+to "default", PulseAudio will be tried if detected and will fallback to ALSA
+(Linux) or OSS (FreeBSD/OpenBSD).
*Example order*: +volume master+
device = "pulse:1"
}
-------------------------------------------------------------
+-------------------------------------------------------------
+volume master {
+ format = "♪: %volume"
+ format_muted = "♪: muted (%volume)"
+ device = "pulse:alsa_output.pci-0000_00_14.2.analog-stereo"
+}
+-------------------------------------------------------------
== Universal module options
Note that if you want to use the JSON output format (with colors in i3bar), you
need to use a slightly more complex wrapper script. There are examples in the
-contrib/ folder, see http://code.i3wm.org/i3status/tree/master/contrib
+contrib/ folder, see https://github.com/i3/i3status/tree/master/contrib
== SIGNALS
projects / i3 / i3status / blobdiff