i3status(1)
===========
-Michael Stapelberg <michael+i3@stapelberg.de>
-v2.2, September 2010
+Michael Stapelberg <michael@i3wm.org>
+v2.6, October 2012
== NAME
== DESCRIPTION
-i3status is a small program (less than 1000 SLOC) for generating a status bar
-for dzen2, xmobar or similar programs. It is designed to be very efficient by
-issuing a very small number of system calls, as one generally wants to update
-such a status line every second. This ensures that even under high load, your
-status bar is updated correctly. Also, it saves a bit of energy by not hogging
-your CPU as much as spawning the corresponding amount of shell commands would.
+i3status is a small program (about 1500 SLOC) for generating a status bar for
+i3bar, dzen2, xmobar or similar programs. It is designed to be very
+efficient by issuing a very small number of system calls, as one generally
+wants to update such a status line every second. This ensures that even under
+high load, your status bar is updated correctly. Also, it saves a bit of energy
+by not hogging your CPU as much as spawning the corresponding amount of shell
+commands would.
== CONFIGURATION
-Since version 2, the configuration file for i3status will be parsed using
-libconfuse. This makes configuration easier in the programmer’s point of
-view and more flexible for the user at the same time.
-
The basic idea of i3status is that you can specify which "modules" should
be used (the order directive). You can then configure each module with its
own section. For every module, you can specify the output format. See below
interval = 5
}
-order = "ipv6"
+order += "ipv6"
order += "disk /"
order += "run_watch DHCP"
order += "run_watch VPN"
}
battery 0 {
- format = "%status %percentage %remaining"
+ format = "%status %percentage %remaining %emptytime"
+ path = "/sys/class/power_supply/BAT%d/uevent"
+ low_threshold = 10
}
run_watch DHCP {
Using +output_format+ you can chose which format strings i3status should
use in its output. Currently available are:
+i3bar::
+i3bar comes with i3 and provides a workspace bar which does the right thing in
+multi-monitor situations. It also comes with tray support and can display the
+i3status output. This output type uses JSON to pass as much meta-information to
+i3bar as possible (like colors, which blocks can be shortened in which way,
+etc.).
dzen2::
Dzen is a general purpose messaging, notification and menuing program for X11.
It was designed to be scriptable in any language and integrate well with window
xmobar is a minimalistic, text based, status bar. It was designed to work
with the xmonad Window Manager.
none::
-Does not use any color codes. Separates values by the pipe symbol.
+Does not use any color codes. Separates values by the pipe symbol. This should
+be used with i3bar and can be used for custom scripts.
=== IPv6
Gets used, free, available and total amount of bytes on the given mounted filesystem.
+These values can also be expressed in percentages with the percentage_used,
+percentage_free, percentage_avail and percentage_used_of_avail formats.
+
*Example order*: +disk /mnt/usbstick+
*Example format*: +%free (%avail)/ %total+
+*Example format*: +%percentage_used used, %percentage_free free, %percentage_avail avail+
+
=== Run-watch
Expands the given path to a pidfile and checks if the process ID found inside
*Example order*: +run_watch DHCP+
+*Example format*: +%title: %status+
+
=== Wireless
Gets the link quality and ESSID of the given wireless network interface. You
=== Battery
-Gets the status (charging, discharging, running), percentage and remaining
-time of the given battery. If you want to use the last full capacity instead
-of the design capacity (when using the design capacity, it may happen that
-your battery is at 23% when fully charged because it’s old. In general, I
-want to see it this way, because it tells me how worn off my battery is.),
-just specify +last_full_capacity = true+.
+Gets the status (charging, discharging, running), percentage, remaining
+time and power consumption (in Watts) of the given battery and when it's
+estimated to be empty. If you want to use the last full capacity instead of the
+design capacity (when using the design capacity, it may happen that your
+battery is at 23% when fully charged because it’s old. In general, I want to
+see it this way, because it tells me how worn off my battery is.), just specify
++last_full_capacity = true+.
+
+If your battery is represented in a non-standard path in /sys, be sure to
+modify the "path" property accordingly. The first occurence of %d gets replaced
+with the battery number, but you can just hard-code a path as well.
+
+It is possible to define a low_threshold that causes the battery text to be
+colored red. The low_threshold type can be of threshold_type "time" or
+"percentage". So, if you configure low_threshold to 10 and threshold_type to
+"time", and your battery lasts another 9 minutes, it will be colored red.
*Example order*: +battery 0+
-*Example format*: +%status %remaining+
+*Example format*: +%status %remaining (%emptytime %consumption)+
+
+*Example low_threshold*: +30+
+
+*Example threshold_type*: +time+
=== CPU-Temperature
=== CPU Usage
-Gets the percentual CPU usage from +/proc/stat+.
+Gets the percentual CPU usage from +/proc/stat+ (Linux) or +sysctl(3)+ (FreeBSD/OpenBSD).
*Example order*: +cpu_usage+
=== Load
Gets the system load (number of processes waiting for CPU time in the last
-5, 10 and 15 minutes).
+1, 5 and 15 minutes).
*Example order*: +load+
-*Example format*: +%5min %10min %15min+
+*Example format*: +%1min %5min %15min+
=== Time
Outputs the volume of the specified mixer on the specified device. Works only
on Linux because it uses ALSA.
+A simplified configuration can be used on FreeBSD and OpenBSD due to
+the lack of ALSA, the +device+, +mixer+ and +mixder_idx+ options can be
+ignored on these systems. On these systems the OSS API is used instead to
+query +/dev/mixer+ directly.
*Example order*: +volume master+
i3status | xmobar -o -t "%StdinReader%" -c "[Run StdinReader]"
---------------------------------------------------------------------
+== What about memory usage or CPU frequency?
+
+While talking about two specific things, please understand this section as a
+general explanation why your favorite information is not included in i3status.
+
+Let’s talk about memory usage specifically. It is hard to measure memory in a
+way which is accurate or meaningful. An in-depth understanding of how paging
+and virtual memory work in your operating system is required. Furthermore, even
+if we had a well-defined way of displaying memory usage and you would
+understand it, I think that it’s not helpful to repeatedly monitor your memory
+usage. One reason for that is that I have not run out of memory in the last few
+years. Memory has become so cheap that even in my 4 year old notebook, I have
+8 GiB of RAM. Another reason is that your operating system will do the right
+thing anyway: Either you have not enough RAM for your workload, but you need to
+do it anyway, then your operating system will swap. Or you don’t have enough
+RAM and you want to restrict your workload so that it fits, then the operating
+system will kill the process using too much RAM and you can act accordingly.
+
+For CPU frequency, the situation is similar. Many people don’t understand how
+frequency scaling works precisely. The generally recommended CPU frequency
+governor ("ondemand") changes the CPU frequency far more often than i3status
+could display it. The display number is therefore often incorrect and doesn’t
+tell you anything useful either.
+
+In general, i3status wants to display things which you would look at
+occasionally anyways, like the current date/time, whether you are connected to
+a WiFi network or not, and if you have enough disk space to fit that 4.3 GiB
+download.
+
+However, if you need to look at some kind of information more than once in a
+while (like checking repeatedly how full your RAM is), you are probably better
+off with a script doing that, which pops up an alert when your RAM usage reaches
+a certain threshold. After all, the point of computers is not to burden you
+with additional boring tasks like repeatedly checking a number.
+
+== External scripts/programs with i3status
+
+In i3status, we don’t want to implement process management again. Therefore,
+there is no module to run arbitrary scripts or commands. Instead, you should
+use your shell, for example like this:
+
+*Example for prepending the i3status output*:
+--------------------------------------------------------------
+#!/bin/sh
+# shell script to prepend i3status with more stuff
+
+i3status | while :
+do
+ read line
+ echo "mystuff | $line" || exit 1
+done
+--------------------------------------------------------------
+
+Put that in some script, say +.bin/my_i3status.sh+ and execute that instead of i3status.
+
+Note that if you want to use the JSON output format (with colors in i3bar), you
+need to use a slightly more complex wrapper script. There are examples in the
+contrib/ folder, see http://code.i3wm.org/i3status/tree/contrib
+
== SEE ALSO
+strftime(3)+, +date(1)+, +glob(3)+, +dzen2(1)+, +xmobar(1)+
Thorsten Toepper
Baptiste Daroussin
+
+Axel Wagner
+
+Fernando Tarlá Cardoso Lemos
projects / i3 / i3status / blobdiff