#----------------------------------------------------------------------------- # Copyright (c) 1994 Regents of the University of Michigan. # All rights reserved. # # Redistribution and use in source and binary forms are permitted # provided that this notice is preserved and that due credit is given # to the University of Michigan at Ann Arbor. The name of the University # may not be used to endorse or promote products derived from this # software without specific prior written permission. This software # is provided ``as is'' without express or implied warranty. # # LDAP common Make defines (included in all but top-level Makefile) # #----------------------------------------------------------------------------- ############################################################################# ## Edit the following variables to have appropriate values for your system ## ############################################################################# ############################################################################# ## LDAP install paths ## ############################################################################# # # by default, everything is installed below INSTROOT # servers, config files, etc. are put in ETCDIR # include files get put in INCLUDEDIR # libraries are put in LIBDIR # man pages are put under MANDIR # programs end-users will run are put in BINDIR # INSTROOT=/usr/local ETCDIR= $(INSTROOT)/etc INCLUDEDIR= $(INSTROOT)/include LIBDIR= $(INSTROOT)/lib MANDIR= $(INSTROOT)/man BINDIR= $(INSTROOT)/bin # # if you want things to run in a different directory from where they # are installed, set this accordingly (this path gets compiled into a # few binaries). otherwise, leave it alone. RUNTIMEETCDIR= $(ETCDIR) ############################################################################# ## General compiler options ## ############################################################################# # Passed to every compile (cc or gcc). This is where you put -O or -g, etc. EXTRACFLAGS=-g # Passed to every link (ld). Include -g here if you did in EXTRACFLAGS. EXTRALDFLAGS=-g ############################################################################# ## If you are NOT using Kerberos authentication, you can skip this section.## ############################################################################# # # Otherwise, to enable kerberos authentication, uncomment KERBEROS (and # AFSKERBEROS if you are running the AFS version of kerberos). Also # uncomment and change the various KRB* lines to point to where the # kerberos libraries and include files are installed at your site. # KERBEROS=-DKERBEROS AFSKERBEROS=-DAFSKERBEROS KRBINCLUDEFLAG = -I/usr/local/kerberos/include KRBLIBFLAG = -L/usr/local/kerberos/lib KRBLIBS = -lkrb -ldes ############################################################################# ## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ## ## If you don't want to build it, you can skip this section. ## ############################################################################# # # To build the ldap server, uncomment the HAVEISODE line, # and the section describing build settings for your version of isode. # HAVEISODE = yes # If you compiled ISODE with TURBO_DISK defined, uncomment this #ISODETURBOLIBS = -lgdbm # uncomment these to have ldapd "pretty print" protocol elements w/debugging PEPSY_DUMP=-DPEPSY_DUMP PEPSY=/usr/local/ic/bin/pepsy # uncommment this line to have ldapd load PP syntax handlers # you'll also need to add -lpp to ISODEBASELIBS below #LDAP_USE_PP=-DLDAP_USE_PP # uncomment NO_SETPROCTITLE to have ldapd NOT change its title #NO_SETPROCTITLE=-DNOSETPROCTITLE # # ISODE Consortium release build settings # You should change the next line so that ICRELEASE matches the (integer) # version number of whatever IC release you have, e.g. 1, 2, or 3 and # also uncomment the next 5 lines. ICRELEASE=-DICRELEASE=2 ISODEPACKAGE=-DISODEPACKAGE=IC ISODEINCLUDEFLAG= -I/usr/local/ic/include ISODELIBFLAG = -L/usr/local/ic/lib ISODEBASELIBS = -lisode # # Freely available ISODE 8.0 release build settings (uncomment the next 4 lines) #ISODEPACKAGE=-DISODEPACKAGE #ISODEINCLUDEFLAG= -I/usr/local/isode/include #ISODELIBFLAG = -L/usr/local/isode/lib #ISODEBASELIBS = -ldsap -lisode # # NEXOR ISODE release build settings (uncomment the next 4 lines) #ISODEPACKAGE=-DISODEPACKAGE=XT #ISODEINCLUDEFLAG= -I/usr/include/isode #ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib #ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi ############################################################################# ## If you don't want to run slapd, skip this section. ## ############################################################################# # # To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD # line and select the SLAPD_BACKENDS you want to use. If you enable the # LDBM backend, also select one of the LDBM backends. MAKESLAPD= yes # # remove the defines for backends you don't want to enable SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD # # If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line you need # to specify which low-level database package to use. There are # four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm. # # berkeley db btree package LDBMBACKEND=-DLDBM_USE_DBBTREE LDBMINCLUDE=-I/usr/local/include LDBMLIB=-ldb # berkeley db hash package #LDBMBACKEND=-DLDBM_USE_DBHASH #LDBMINCLUDE=-I/usr/local/include #LDBMLIB=-ldb # gnu dbm (gdbm) #LDBMBACKEND=-DLDBM_USE_GDBM #LDBMINCLUDE=-I/usr/local/include #LDBMLIB=-lgdbm # standard unix ndbm #LDBMBACKEND=-DLDBM_USE_NDBM # # if you want to use a non-default threads package change these lines #THREADS=-DNO_THREADS #THREADSLIB= ############################################################################# ## The following options are used by the xax500 client. If you haven't ## ## retrieved the xax500 source and dropped it into the "clients" ## ## directory, you can skip this section. ## ############################################################################# # # location of your X include files #XINCLUDES= -I/usr/local/X11/include # # location of your X libraries #XLIBDIRS=-L/usr/local/X11/lib # # include any extra X libraries you need here # the following works with sunos 4 and X11R5 #XLIBS = $(XLIBDIRS) -lXm -lXt -lX11 # the following has been known to work with Solaris 2.4 and X11R6 #XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11 ############################################################################# ## If you don't want to do auto-translation of character sets, skip this ## ############################################################################# # # Otherwise, uncomment this line and set the following options. #STR_TRANSLATION=-DSTR_TRANSLATION # # remove the defines for LDAP client library T.61 character translation # you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591" # with the number of the particular character set you use. E.g., use "88594" # if you use the ISO 8859-4 chracter set. #LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591" # # uncomment one these lines to enable automatic T.61 translation by default #LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859 ############################################################################# ## General options ## ############################################################################# # uncomment this line to enable debugging code (a good idea) LDAP_DEBUG=-DLDAP_DEBUG # uncomment this line to turn on a few U of Michigan specific things UOFM=-DUOFM # uncomment this line to delete a few printfs in the lber and ldap libraries. #NO_USERINTERFACE=-DNO_USERINTERFACE # uncomment this line to include Connectionless LDAP support CLDAP=-DCLDAP # uncomment this line to eliminate local caching support in the libldap #NO_CACHE=-DNO_CACHE # uncomment this line to enable support for LDAP referrals in libldap LDAP_REFERRALS=-DLDAP_REFERRALS # uncomment this line to use soundex for approximate matches in slapd. # the default is to use the metaphone algorithm. #PHONETIC=-DSOUNDEX