From 7772d8727623a1ed32b987ef2863a4beb5255804 Mon Sep 17 00:00:00 2001 From: Kurt Zeilenga Date: Tue, 8 Sep 1998 04:08:46 +0000 Subject: [PATCH] Merge in gmake support from -devel --- Make-common.gmake | 324 ++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 3 +- 2 files changed, 325 insertions(+), 2 deletions(-) create mode 100644 Make-common.gmake diff --git a/Make-common.gmake b/Make-common.gmake new file mode 100644 index 0000000000..d5788176df --- /dev/null +++ b/Make-common.gmake @@ -0,0 +1,324 @@ +#----------------------------------------------------------------------------- +# Copyright 1998 The OpenLDAP Foundation, Redwood City, California, USA +# All rights reserved. +# +# Redistribution and use in source and binary forms are permitted only +# as authorized by the OpenLDAP Public License. A copy of this +# license is available at http://www.OpenLDAP.org/license.html or +# in file LICENSE in the top-level directory of the distribution. +# +# This work is derived from the University of Michigan LDAP v3.3 +# distribution. Information concerning is available at +# http://www.umich.edu/~dirsvcs/ldap/ldap.html. +# +# This work also contains materials derived from public sources. +#----------------------------------------------------------------------------- +# Copyright (c) 1994 Regents of the University of Michigan. +# All rights reserved. +# +# Redistribution and use in source and binary forms are permitted +# provided that this notice is preserved and that due credit is given +# to the University of Michigan at Ann Arbor. The name of the University +# may not be used to endorse or promote products derived from this +# software without specific prior written permission. This software +# is provided ``as is'' without express or implied warranty. +#----------------------------------------------------------------------------- +# LDAP common Make defines (included in all but top-level Makefile) + +############################################################################# +## Edit the following variables to have appropriate values for your system ## +############################################################################# + +# +# This template should be used by systems with Gnu Make. +# +# If Gnu make is not installed as make, you must uncomment out +# this line. +#MAKE=gmake + +############################################################################# +## LDAP install paths ## +############################################################################# +# by default, everything is installed below INSTROOT +# config files, etc. are put in ETCDIR +# include files get put in INCLUDEDIR +# libraries are put in LIBDIR +# man pages are put under MANDIR +# programs end-users will run are put in BINDIR +# programs sysadmins will run are put in SBINDIR +# servers are put in LIBEXECDIR +# pid/args files are put in RUNDIR +# +# Per platform defaults override these. +# +ifndef LDAP_PREFIX +LDAP_PREFIX= /usr/local +endif +ifndef LDAP_INSTROOT +LDAP_INSTROOT= $(LDAP_PREFIX) +endif +ifndef LDAP_ETCDIR +LDAP_ETCDIR= $(LDAP_INSTROOT)/etc/ldap +endif +ifndef LDAP_INCDIR +LDAP_INCDIR= $(LDAP_INSTROOT)/include +endif +ifndef LDAP_LIBDIR +LDAP_LIBDIR= $(LDAP_INSTROOT)/lib +endif +ifndef LDAP_MANDIR +LDAP_MANDIR= $(LDAP_INSTROOT)/man +endif +ifndef LDAP_BINDIR +LDAP_BINDIR= $(LDAP_INSTROOT)/bin +endif +ifndef LDAP_SBINDIR +LDAP_SBINDIR=$(LDAP_INSTROOT)/sbin +endif +ifndef LDAP_LIBEXECDIR +LDAP_LIBEXECDIR= $(LDAP_INSTROOT)/libexec +endif +ifndef LDAP_ETCDIR +LDAP_RUNDIR= $(LDAP_ETCDIR) +endif + +############################################################################# +## General compiler options ## +############################################################################# +# Passed to every compile (cc or gcc). This is where you put -O or -g, etc. +#EXTRACFLAGS=-O -g +#EXTRACFLAGS=-O +ifndef EXTRACFLAGS +EXTRACFLAGS?=-g +endif +# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS. +ifndef EXTRALDFLAGS +EXTRALDFLAGS=-g +endif + +############################################################################# +## If you are NOT using Kerberos authentication, you can skip this section.## +############################################################################# +# +# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and +# AFSKERBEROS if you are running the AFS version of kerberos). Also +# uncomment and change the various KRB* lines to point to where the +# kerberos libraries and include files are installed at your site. +# +#KERBEROS=-DKERBEROS +#AFSKERBEROS=-DAFSKERBEROS +#KRBINCLUDEFLAG = -I/usr/local/kerberos/include +#KRBLIBFLAG = -L/usr/local/kerberos/lib +#KRBLIBS = -lkrb -ldes + +############################################################################# +## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ## +## If you don't want to build it, you can skip this section. ## +############################################################################# +# +# To build the ldap server, uncomment the HAVEISODE line, +# and the section describing build settings for your version of isode. +# +#HAVEISODE = yes +# If you compiled ISODE with TURBO_DISK defined, uncomment this +#ISODETURBOLIBS = -lgdbm +# uncomment these to have ldapd "pretty print" protocol elements w/debugging +#PEPSY_DUMP=-DPEPSY_DUMP +#PEPSY=/usr/local/ic/bin/pepsy +# uncommment this line to have ldapd load PP syntax handlers +# you'll also need to add -lpp to ISODEBASELIBS below +#LDAP_USE_PP=-DLDAP_USE_PP +# uncomment NO_SETPROCTITLE to have ldapd NOT change its title +#NO_SETPROCTITLE=-DNOSETPROCTITLE +# +# ISODE Consortium release build settings +# You should change the next line so that ICRELEASE matches the (integer) +# version number of whatever IC release you have, e.g. 1, 2, or 3 and +# also uncomment the next 5 lines. +#ICRELEASE=-DICRELEASE=1 +#ISODEPACKAGE=-DISODEPACKAGE=IC +#ISODEINCLUDEFLAG= -I/usr/local/ic/include/isode -I/usr/local/ic/include +#ISODELIBFLAG = -L/usr/local/ic/lib +#ISODEBASELIBS = -lisode +# +# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines) +#ISODEPACKAGE=-DISODEPACKAGE +#ISODEINCLUDEFLAG= -I/usr/local/isode/include +#ISODELIBFLAG = -L/usr/local/isode/lib +#ISODEBASELIBS = -ldsap -lisode +# +# NEXOR ISODE release build settings (uncomment the next 4 lines) +#ISODEPACKAGE=-DISODEPACKAGE=XT +#ISODEINCLUDEFLAG= -I/usr/include/isode +#ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib +#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi + +############################################################################# +## If you don't want to run slapd, skip this section. ## +############################################################################# +# +# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD +# line and select the SLAPD_BACKENDS you want to use. If you enable the +# LDBM backend, also select one of the LDBM backends. +MAKESLAPD= yes +# +# remove the defines for backends you don't want to enable +SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD +# +# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line, +# which low-level database package to use must be specified. You +# may want to overide the platform settings by disabling the lines +# below and hardcoding the desired settings. +# +# The four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm. +# You will also need to edit the include and lib strings appropriately. +# standard unix ndbm + +# Fallback settings, defaults are set in build/*/Make-platform +# The NDBM interface may not work on some (any) platforms. +# You may be happier with Berkeley DB B-trees. +ifndef LDBMBACKEND +LDBMBACKEND=-DLDBM_USE_NDBM +endif +ifndef LDBMINCLUDE +LDBMINCLUDE= +endif +ifndef LDBMLIB +LDBMLIB= +endif + +# LDBM Hardcode Setting Examples (may require editing) +# berkeley db btree package +#LDBMLIB=-ldb +#LDBMBACKEND=-DLDBM_USE_DBBTREE +#LDBMINCLUDE=-I/usr/local/db/include +#LDBMLIB?=-ldb +# berkeley db hash package +#LDBMBACKEND=-DLDBM_USE_DBHASH +#LDBMINCLUDE=-I/usr/local/db/include +#LDBMLIB=-ldb +# gnu dbm (gdbm) +#LDBMBACKEND=-DLDBM_USE_GDBM +#LDBMINCLUDE=-I/usr/local/gdbm/include +#LDBMLIB=-lgdbm + +#undef these if you have SLEEPYCAT DB2 installed +#LDBMBACKEND=-DLDBM_USE_DBBTREE -DHAVE_SLEEPYCAT_DB2 +#LDBMINCLUDE=-I/usr/local/include +#LDBMLIB=-L/usr/local/lib -ldb + +# if you want to use a non-default threads package change the defines below +# to one of: +# -DPOSIX_THREADS (draft 10 or standard) +# -DTHREAD_MIT_PTHREADS (draft 4) +# -DTHREAD_NEXT_CTHREADS +# -DTHREAD_DCE_PTHREADS +# -DTHREAD_SUNOS4_LWP +# -DTHREAD_SUNOS5_LWP +# and select the appropriate library. + +ifndef THREADS +THREADS=-DNO_THREADS +endif +ifndef THREADSLIB +THREADSLIB= +endif + +# Locations of auxilary programs +# (excepts to below are generally defined in Make-platform) +ifndef LDAP_SENDMAIL +LDAP_SENDMAIL=/usr/lib/sendmail +endif +ifndef LDAP_EDITOR +LDAP_EDITOR=/usr/ucb/vi +endif +ifndef LDAP_FINGER +LDAP_FINGER=/usr/ucb/finger +endif + +# For generation of compressed man pages +# (excepts to below are generally defined in Make-platform) +ifndef MANCOMPRESS +MANCOMPRESS=cat +endif +ifndef MANCOMPRESSSUFFIX +MANCOMPRESSSUFFIX= +endif + +############################################################################# +## The following options are used by the xax500 client. If you haven't ## +## retrieved the xax500 source and dropped it into the "clients" ## +## directory, you can skip this section. ## +############################################################################# +# +# location of your X include files +#XINCLUDES= -I/usr/X11/include +# +# location of your X libraries +#XLIBDIRS=-L/usr/X11/lib +# +# include any extra X libraries you need here +# the following works with sunos 4 and X11R5 +#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11 +# the following has been known to work with Solaris 2.4 and X11R6 +#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11 + +############################################################################# +## If you don't want to do auto-translation of character sets, skip this ## +############################################################################# +# +# Otherwise, uncomment this line and set the following options. +#STR_TRANSLATION=-DSTR_TRANSLATION +# +# remove the defines for LDAP client library T.61 character translation +# you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591" +# with the number of the particular character set you use. E.g., use "88594" +# if you use the ISO 8859-4 chracter set. +#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591" +# +# uncomment one these lines to enable automatic T.61 translation by default +#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859 + +############################################################################# +## General options ## +############################################################################# +# uncomment this line to enable debugging code (a good idea) +LDAP_DEBUG=-DLDAP_DEBUG + +# uncomment this line to turn on a few U of Michigan specific things +#UOFM=-DUOFM + +# uncomment this line to delete a few printfs in the lber and ldap libraries. +#NO_USERINTERFACE=-DNO_USERINTERFACE + +# uncomment this line to include Connectionless LDAP support +#CLDAP=-DCLDAP + +# uncomment this line to eliminate local caching support in the libldap +#NO_CACHE=-DNO_CACHE + +# uncomment this line to do reverse lookups (useful for doing ACLs +# by host/domain names) +LDAP_REVERSE_LOOKUP=-DREVERSE_LOOKUP + +# uncomment this line to enable support for LDAP referrals in libldap +LDAP_REFERRALS=-DLDAP_REFERRALS + +# uncomment this line to enable ACL by groups +# LDAP_ACLGROUP=-DACLGROUP + +# uncomment these lines to enable support for CRYPT passwords +# in LDBM. Crypt uses platform provided crypt(3). +# LDAP_CRYPT=-DLDAP_CRYPT +# LDAP_CRYPT_LIB?= +# and comment this line out +LDAP_CRYPT_LIB= + +# uncomment these lines to enable support fro tcp_wrappers in servers. +# Requires tcp_wrappers. +# LDAP_TCP_WRAPPERS=-DTCP_WRAPPERS -I/usr/local/include +# LDAP_TCP_WRAPPERS_LIB=-L/usr/local/lib -lwrap + +# uncomment this line to use soundex for approximate matches in slapd. +# the default is to use the metaphone algorithm. +#PHONETIC=-DSOUNDEX diff --git a/Makefile b/Makefile index ccc67028bb..cdb48a6c4d 100644 --- a/Makefile +++ b/Makefile @@ -342,8 +342,7 @@ Make-common: Make-common.dist echo "or touch Make-common to ignore."; \ exit 1; \ fi; \ - cp Make-common.dist Make-common; \ - echo "Make-common installed from distribution." ; \ + echo "Copy Make-common.dist or Make-common.gmake to Make-common" \ echo " Edit as needed before making!" ; \ exit 1 # -- 2.39.2