X-Git-Url: https://git.sur5r.net/?p=u-boot;a=blobdiff_plain;f=README;h=b1ddf89fc588290a85311c713260df3718e1c86e;hp=fda2d58e475f565ce36c85eb52ebcf45c620dee2;hb=HEAD;hpb=e89f8aae3d67cd3d2d04cedd9735c5e5fd32b621

diff --git a/README b/README
index fda2d58e47..b1ddf89fc5 100644
--- a/README
+++ b/README
@@ -1,9 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
 #
 # (C) Copyright 2000 - 2013
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
 
 Summary:
 ========
@@ -333,11 +331,6 @@ The following options need to be configured:
 
 - Board Type:	Define exactly one, e.g. CONFIG_MPC8540ADS.
 
-- Marvell Family Member
-		CONFIG_SYS_MVFS		- define it if you want to enable
-					  multiple fs option at one time
-					  for marvell soc family
-
 - 85xx CPU Options:
 		CONFIG_SYS_PPC64
 
@@ -812,14 +805,6 @@ The following options need to be configured:
 		CONFIG_AT91_HW_WDT_TIMEOUT
 		specify the timeout in seconds. default 2 seconds.
 
-- U-Boot Version:
-		CONFIG_VERSION_VARIABLE
-		If this variable is defined, an environment variable
-		named "ver" is created by U-Boot showing the U-Boot
-		version as printed by the "version" command.
-		Any change to this variable will be reverted at the
-		next reset.
-
 - Real-Time Clock:
 
 		When CONFIG_CMD_DATE is selected, the type of the RTC
@@ -1182,10 +1167,6 @@ The following options need to be configured:
 		CONFIG_SUPPORT_EMMC_BOOT
 		Enable some additional features of the eMMC boot partitions.
 
-		CONFIG_SUPPORT_EMMC_RPMB
-		Enable the commands for reading, writing and programming the
-		key for the Replay Protection Memory Block partition in eMMC.
-
 - USB Device Firmware Update (DFU) class support:
 		CONFIG_DFU_OVER_USB
 		This enables the USB portion of the DFU USB class
@@ -2213,12 +2194,6 @@ The following options need to be configured:
 		the environment like the "source" command or the
 		boot command first.
 
-		CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-		Define this in order to add variables describing certain
-		run-time determined information about the hardware to the
-		environment.  These will be named board_name, board_rev.
-
 		CONFIG_DELAY_ENVIRONMENT
 
 		Normally the environment is loaded when the board is
@@ -2427,19 +2402,6 @@ FIT uImage format:
  -150	common/cmd_nand.c	Incorrect FIT image format
   151	common/cmd_nand.c	FIT image format OK
 
-- legacy image format:
-		CONFIG_IMAGE_FORMAT_LEGACY
-		enables the legacy image format support in U-Boot.
-
-		Default:
-		enabled if CONFIG_FIT_SIGNATURE is not defined.
-
-		CONFIG_DISABLE_IMAGE_LEGACY
-		disable the legacy image format
-
-		This define is introduced, as the legacy image format is
-		enabled per default for backward compatibility.
-
 - Standalone program support:
 		CONFIG_STANDALONE_LOAD_ADDR
 
@@ -2663,6 +2625,10 @@ FIT uImage format:
 		CONFIG_SPL_NAND_DRIVERS
 		SPL uses normal NAND drivers, not minimal drivers.
 
+		CONFIG_SPL_NAND_IDENT
+		SPL uses the chip ID list to identify the NAND flash.
+		Requires CONFIG_SPL_NAND_BASE.
+
 		CONFIG_SPL_NAND_ECC
 		Include standard software ECC in the SPL
 
@@ -2724,7 +2690,7 @@ FIT uImage format:
 		use an arch-specific makefile fragment instead, for
 		example if more than one image needs to be produced.
 
-		CONFIG_FIT_SPL_PRINT
+		CONFIG_SPL_FIT_PRINT
 		Printing information about a FIT image adds quite a bit of
 		code to SPL. So this is normally disabled in SPL. Use this
 		option to re-enable it. This will affect the output of the