From: Adam Sampson Date: Sun, 1 Feb 2015 12:58:58 +0000 (+0000) Subject: sunxi: Add Linksprite_pcDuino3_Nano board / defconfig X-Git-Tag: v2015.04-rc1~3^2~6 X-Git-Url: https://git.sur5r.net/?p=u-boot;a=commitdiff_plain;h=00f120bd6154095eaddafe75297786874372e075 sunxi: Add Linksprite_pcDuino3_Nano board / defconfig This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. Like the BananaPi, this board needs GMAC_TX_DELAY set to 3 in order for GMAC to work reliably at gigabit speeds. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano Signed-off-by: Adam Sampson Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 9050059e74..44f57ad5cc 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -81,6 +81,11 @@ M: Zoltan Herpai S: Maintained F: configs/Linksprite_pcDuino_defconfig +LINKSPRITE-PCDUINO3-NANO BOARD +M: Adam Sampson +S: Maintained +F: configs/Linksprite_pcDuino3_Nano_defconfig + MARSBOARD-A10 BOARD M: Aleksei Mamlin S: Maintained diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig new file mode 100644 index 0000000000..4baba14bf0 --- /dev/null +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -0,0 +1,11 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-pcduino3-nano.dtb" +CONFIG_GMAC_TX_DELAY=3 +CONFIG_USB1_VBUS_PIN="PH11" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_DRAM_CLK=408 ++S:CONFIG_DRAM_ZQ=122 ++S:CONFIG_DRAM_EMR1=4