From: wdenk Date: Fri, 4 Mar 2005 11:27:31 +0000 (+0000) Subject: * Fix get_partition_info() parameter error in all other calls X-Git-Tag: LABEL_2006_03_12_0025~360 X-Git-Url: https://git.sur5r.net/?p=u-boot;a=commitdiff_plain;h=b05dcb58fe04c6274fc942fa93efe77072395951 * Fix get_partition_info() parameter error in all other calls (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c). * Enable USB and IDE support for INKA4x0 board * Patch by Andrew Dyer, 28 February 2005: fix ext2load passing an incorrect pointer to get_partition_info() resulting in load failure for devices other than 0 --- diff --git a/CHANGELOG b/CHANGELOG index 5d6ecf5aa4..38b8d24e8e 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -5,6 +5,15 @@ Changes for U-Boot 1.1.3: * Patch by Stefan Roese, 01 March 2005: Update for esd boards dp405 and hub405 +* Fix get_partition_info() parameter error in all other calls + (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c). + +* Enable USB and IDE support for INKA4x0 board + +* Patch by Andrew Dyer, 28 February 2005: + fix ext2load passing an incorrect pointer to get_partition_info() + resulting in load failure for devices other than 0 + * Add support for SRAM and 2 x Quad UARTs on INKA4x0 board * Cleanup USB and partition defines diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c index 08a1b7f00b..4900201dd8 100644 --- a/board/inka4x0/inka4x0.c +++ b/board/inka4x0/inka4x0.c @@ -200,3 +200,32 @@ void pci_init_board(void) pci_mpc5xxx_init(&hose); } #endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +#define GPIO_PSC1_4 0x01000000UL + +void init_ide_reset (void) +{ + debug ("init_ide_reset\n"); + + /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; + /* Deassert reset */ + *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; +} + +void ide_set_reset (int idereset) +{ + debug ("ide_reset(%d)\n", idereset); + + if (idereset) { + *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; + /* Make a delay. MPC5200 spec says 25 usec min */ + udelay(500000); + } else { + *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; + } +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 75afb320ec..af836cd614 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -41,6 +41,9 @@ #include #include #include +#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE)) +#include +#endif #ifndef CONFIG_DOS_PARTITION #error DOS partition support must be selected @@ -223,7 +226,7 @@ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) PRINTF("Using device %s%d, partition %d\n", argv[1], dev, part); if (part != 0) { - if (get_partition_info (&dev_desc[dev], part, &info)) { + if (get_partition_info (dev_desc, part, &info)) { printf ("** Bad partition %d **\n", part); return(1); } diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 1cc88e3e50..e185c95b26 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -413,7 +413,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } part = simple_strtoul(++ep, NULL, 16); } - if (get_partition_info (&ide_dev_desc[dev], part, &info)) { + if (get_partition_info (ide_dev_desc, part, &info)) { SHOW_BOOT_PROGRESS (-1); return 1; } diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index cb316e5969..508ffcbdac 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -212,7 +212,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) PRINTF("Using device %s%d, partition %d\n", argv[1], dev, part); if (part != 0) { - if (get_partition_info (&dev_desc[dev], part, &info)) { + if (get_partition_info (dev_desc, part, &info)) { printf ("** Bad partition %d **\n", part); return 1; } diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 68e46b6389..7ee9d8efb1 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -243,7 +243,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } part = simple_strtoul(++ep, NULL, 16); } - if (get_partition_info (&scsi_dev_desc[dev], part, &info)) { + if (get_partition_info (scsi_dev_desc, part, &info)) { printf("error reading partinfo\n"); return 1; } diff --git a/fs/ext2/dev.c b/fs/ext2/dev.c index 35a576daa8..1469e982b7 100644 --- a/fs/ext2/dev.c +++ b/fs/ext2/dev.c @@ -33,7 +33,6 @@ static block_dev_desc_t *ext2fs_block_dev_desc; static disk_partition_t part_info; -#undef DEBUG int ext2fs_set_blk_dev (block_dev_desc_t * rbdd, int part) { ext2fs_block_dev_desc = rbdd; @@ -74,9 +73,7 @@ int ext2fs_devread (int sector, int byte_offset, int byte_len, char *buf) { sector += byte_offset >> SECTOR_BITS; byte_offset &= SECTOR_SIZE - 1; -#if defined(DEBUG) - printf (" <%d, %d, %d>\n", sector, byte_offset, byte_len); -#endif + debug (" <%d, %d, %d>\n", sector, byte_offset, byte_len); if (ext2fs_block_dev_desc == NULL) { printf ("** Invalid Block Device Descriptor (NULL)\n"); diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 15b124a2ab..038ab75e7c 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -80,12 +80,17 @@ * Supported commands */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EXT2 | \ + CFG_CMD_FAT | \ + CFG_CMD_IDE | \ CFG_CMD_PCI | \ CFG_CMD_USB ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include +#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ + #if (TEXT_BASE == 0xFFE00000) /* Boot low */ # define CFG_LOWBOOT 1 #endif @@ -281,4 +286,38 @@ #define CONFIG_USB_CONFIG 0x00001000 #define CONFIG_USB_STORAGE +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#define CONFIG_ATAPI 1 + #endif /* __CONFIG_H */