From 65f62b1ca12050c4e3b3e5ed641447918f4c4b7b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 8 Sep 2016 07:47:32 +0100 Subject: [PATCH] pci: Flip condition for detecting non-PCI parent devices In pci_uclass_pre_probe an attempt is made to detect whether the parent of a device is a PCI device and that the device is thus a bridge. This was being done by checking whether the parent of the device is of the UCLASS_ROOT class. This causes problems if the PCI controller is a child of some other non-PCI node, for example a simple-bus node. For example, if the device tree contains something like the following then pci_uclass_pre_probe would incorrectly believe that the PCI controller is a bridge, with a PCI parent: / { some_child { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <>; pci_controller: pci@10000000 { compatible = "my-pci-controller"; device_type = "pci"; reg = <0x10000000 0x2000000>; }; }; }; Avoid this incorrect detection of bridges by instead checking whether the parent devices class is UCLASS_PCI and treating a device as a bridge when this is true, making use of device_is_on_pci_bus to perform this test. Signed-off-by: Paul Burton Reviewed-by: Simon Glass --- drivers/pci/pci-uclass.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 342b78c0c4..3b00e6a41b 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -837,7 +837,7 @@ static int pci_uclass_pre_probe(struct udevice *bus) hose = bus->uclass_priv; /* For bridges, use the top-level PCI controller */ - if (device_get_uclass_id(bus->parent) == UCLASS_ROOT) { + if (!device_is_on_pci_bus(bus)) { hose->ctlr = bus; ret = decode_regions(hose, gd->fdt_blob, bus->parent->of_offset, bus->of_offset); -- 2.39.2